0 files changed, 0 insertions, 0 deletions
diff --git a/arch/.gitignore b/arch/.gitignore
index 741468920320..756c19c34f99 100644
--- a/arch/.gitignore
+++ b/arch/.gitignore
@@ -1,2 +1,3 @@
-i386
-x86_64
+# SPDX-License-Identifier: GPL-2.0-only
+/i386/
+/x86_64/
diff --git a/arch/Kconfig b/arch/Kconfig
index 5f8a5d84dbbe..ebe08b9186ad 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -9,61 +9,117 @@
 #
 source "arch/$(SRCARCH)/Kconfig"
 
+config ARCH_CONFIGURES_CPU_MITIGATIONS
+	bool
+
+if !ARCH_CONFIGURES_CPU_MITIGATIONS
+config CPU_MITIGATIONS
+	def_bool y
+endif
+
+#
+# Selected by architectures that need custom DMA operations for e.g. legacy
+# IOMMUs not handled by dma-iommu.  Drivers must never select this symbol.
+#
+config ARCH_HAS_DMA_OPS
+	depends on HAS_DMA
+	select DMA_OPS_HELPERS
+	bool
+
 menu "General architecture-dependent options"
 
-config CRASH_CORE
+config ARCH_HAS_SUBPAGE_FAULTS
 	bool
+	help
+	  Select if the architecture can check permissions at sub-page
+	  granularity (e.g. arm64 MTE). The probe_user_*() functions
+	  must be implemented.
 
-config KEXEC_CORE
-	select CRASH_CORE
+config HOTPLUG_SMT
 	bool
 
-config KEXEC_ELF
+config SMT_NUM_THREADS_DYNAMIC
 	bool
 
-config HAVE_IMA_KEXEC
+config ARCH_SUPPORTS_SCHED_SMT
 	bool
 
-config HOTPLUG_SMT
+config ARCH_SUPPORTS_SCHED_CLUSTER
+	bool
+
+config ARCH_SUPPORTS_SCHED_MC
 	bool
 
-config OPROFILE
-	tristate "OProfile system profiling"
-	depends on PROFILING
-	depends on HAVE_OPROFILE
-	select RING_BUFFER
-	select RING_BUFFER_ALLOW_SWAP
+config SCHED_SMT
+	bool "SMT (Hyperthreading) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_SMT
+	default y
 	help
-	  OProfile is a profiling system capable of profiling the
-	  whole system, include the kernel, kernel modules, libraries,
-	  and applications.
+	  Improves the CPU scheduler's decision making when dealing with
+	  MultiThreading at a cost of slightly increased overhead in some
+	  places. If unsure say N here.
 
-	  If unsure, say N.
+config SCHED_CLUSTER
+	bool "Cluster scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_CLUSTER
+	default y
+	help
+	  Cluster scheduler support improves the CPU scheduler's decision
+	  making when dealing with machines that have clusters of CPUs.
+	  Cluster usually means a couple of CPUs which are placed closely
+	  by sharing mid-level caches, last-level cache tags or internal
+	  busses.
 
-config OPROFILE_EVENT_MULTIPLEX
-	bool "OProfile multiplexing support (EXPERIMENTAL)"
-	default n
-	depends on OPROFILE && X86
+config SCHED_MC
+	bool "Multi-Core Cache (MC) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_MC
+	default y
 	help
-	  The number of hardware counters is limited. The multiplexing
-	  feature enables OProfile to gather more events than counters
-	  are provided by the hardware. This is realized by switching
-	  between events at a user specified time interval.
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
 
-	  If unsure, say N.
+# Selected by HOTPLUG_CORE_SYNC_DEAD or HOTPLUG_CORE_SYNC_FULL
+config HOTPLUG_CORE_SYNC
+	bool
 
-config HAVE_OPROFILE
+# Basic CPU dead synchronization selected by architecture
+config HOTPLUG_CORE_SYNC_DEAD
 	bool
+	select HOTPLUG_CORE_SYNC
 
-config OPROFILE_NMI_TIMER
-	def_bool y
-	depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !PPC64
+# Full CPU synchronization with alive state selected by architecture
+config HOTPLUG_CORE_SYNC_FULL
+	bool
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
+	select HOTPLUG_CORE_SYNC
+
+config HOTPLUG_SPLIT_STARTUP
+	bool
+	select HOTPLUG_CORE_SYNC_FULL
+
+config HOTPLUG_PARALLEL
+	bool
+	select HOTPLUG_SPLIT_STARTUP
+
+config GENERIC_IRQ_ENTRY
+	bool
+
+config GENERIC_SYSCALL
+	bool
+	depends on GENERIC_IRQ_ENTRY
+
+config GENERIC_ENTRY
+	bool
+	select GENERIC_IRQ_ENTRY
+	select GENERIC_SYSCALL
 
 config KPROBES
 	bool "Kprobes"
-	depends on MODULES
 	depends on HAVE_KPROBES
 	select KALLSYMS
+	select EXECMEM
+	select NEED_TASKS_RCU
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
@@ -72,30 +128,30 @@ config KPROBES
 	  If in doubt, say "N".
 
 config JUMP_LABEL
-       bool "Optimize very unlikely/likely branches"
-       depends on HAVE_ARCH_JUMP_LABEL
-       depends on CC_HAS_ASM_GOTO
-       help
-         This option enables a transparent branch optimization that
-	 makes certain almost-always-true or almost-always-false branch
-	 conditions even cheaper to execute within the kernel.
-
-	 Certain performance-sensitive kernel code, such as trace points,
-	 scheduler functionality, networking code and KVM have such
-	 branches and include support for this optimization technique.
-
-         If it is detected that the compiler has support for "asm goto",
-	 the kernel will compile such branches with just a nop
-	 instruction. When the condition flag is toggled to true, the
-	 nop will be converted to a jump instruction to execute the
-	 conditional block of instructions.
-
-	 This technique lowers overhead and stress on the branch prediction
-	 of the processor and generally makes the kernel faster. The update
-	 of the condition is slower, but those are always very rare.
-
-	 ( On 32-bit x86, the necessary options added to the compiler
-	   flags may increase the size of the kernel slightly. )
+	bool "Optimize very unlikely/likely branches"
+	depends on HAVE_ARCH_JUMP_LABEL
+	select OBJTOOL if HAVE_JUMP_LABEL_HACK
+	help
+	  This option enables a transparent branch optimization that
+	  makes certain almost-always-true or almost-always-false branch
+	  conditions even cheaper to execute within the kernel.
+
+	  Certain performance-sensitive kernel code, such as trace points,
+	  scheduler functionality, networking code and KVM have such
+	  branches and include support for this optimization technique.
+
+	  If it is detected that the compiler has support for "asm goto",
+	  the kernel will compile such branches with just a nop
+	  instruction. When the condition flag is toggled to true, the
+	  nop will be converted to a jump instruction to execute the
+	  conditional block of instructions.
+
+	  This technique lowers overhead and stress on the branch prediction
+	  of the processor and generally makes the kernel faster. The update
+	  of the condition is slower, but those are always very rare.
+
+	  ( On 32-bit x86, the necessary options added to the compiler
+	    flags may increase the size of the kernel slightly. )
 
 config STATIC_KEYS_SELFTEST
 	bool "Static key selftest"
@@ -103,23 +159,30 @@ config STATIC_KEYS_SELFTEST
 	help
 	  Boot time self-test of the branch patching code.
 
+config STATIC_CALL_SELFTEST
+	bool "Static call selftest"
+	depends on HAVE_STATIC_CALL
+	help
+	  Boot time self-test of the call patching code.
+
 config OPTPROBES
 	def_bool y
 	depends on KPROBES && HAVE_OPTPROBES
-	select TASKS_RCU if PREEMPTION
+	select NEED_TASKS_RCU
 
 config KPROBES_ON_FTRACE
 	def_bool y
 	depends on KPROBES && HAVE_KPROBES_ON_FTRACE
 	depends on DYNAMIC_FTRACE_WITH_REGS
 	help
-	 If function tracer is enabled and the arch supports full
-	 passing of pt_regs to function tracing, then kprobes can
-	 optimize on top of function tracing.
+	  If function tracer is enabled and the arch supports full
+	  passing of pt_regs to function tracing, then kprobes can
+	  optimize on top of function tracing.
 
 config UPROBES
 	def_bool n
 	depends on ARCH_SUPPORTS_UPROBES
+	select TASKS_TRACE_RCU
 	help
 	  Uprobes is the user-space counterpart to kprobes: they
 	  enable instrumentation applications (such as 'perf probe')
@@ -131,6 +194,22 @@ config UPROBES
 	    managed by the kernel and kept transparent to the probed
 	    application. )
 
+config HAVE_64BIT_ALIGNED_ACCESS
+	def_bool 64BIT && !HAVE_EFFICIENT_UNALIGNED_ACCESS
+	help
+	  Some architectures require 64 bit accesses to be 64 bit
+	  aligned, which also requires structs containing 64 bit values
+	  to be 64 bit aligned too. This includes some 32 bit
+	  architectures which can do 64 bit accesses, as well as 64 bit
+	  architectures without unaligned access.
+
+	  This symbol should be selected by an architecture if 64 bit
+	  accesses are required to be 64 bit aligned in this way even
+	  though it is not a 64 bit architecture.
+
+	  See Documentation/core-api/unaligned-memory-access.rst for
+	  more information on the topic of unaligned memory accesses.
+
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool
 	help
@@ -147,31 +226,37 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	  problems with received packets if doing so would not help
 	  much.
 
-	  See Documentation/unaligned-memory-access.txt for more
+	  See Documentation/core-api/unaligned-memory-access.rst for more
 	  information on the topic of unaligned memory accesses.
 
 config ARCH_USE_BUILTIN_BSWAP
-       bool
-       help
-	 Modern versions of GCC (since 4.4) have builtin functions
-	 for handling byte-swapping. Using these, instead of the old
-	 inline assembler that the architecture code provides in the
-	 __arch_bswapXX() macros, allows the compiler to see what's
-	 happening and offers more opportunity for optimisation. In
-	 particular, the compiler will be able to combine the byteswap
-	 with a nearby load or store and use load-and-swap or
-	 store-and-swap instructions if the architecture has them. It
-	 should almost *never* result in code which is worse than the
-	 hand-coded assembler in <asm/swab.h>.  But just in case it
-	 does, the use of the builtins is optional.
-
-	 Any architecture with load-and-swap or store-and-swap
-	 instructions should set this. And it shouldn't hurt to set it
-	 on architectures that don't have such instructions.
+	bool
+	help
+	  Modern versions of GCC (since 4.4) have builtin functions
+	  for handling byte-swapping. Using these, instead of the old
+	  inline assembler that the architecture code provides in the
+	  __arch_bswapXX() macros, allows the compiler to see what's
+	  happening and offers more opportunity for optimisation. In
+	  particular, the compiler will be able to combine the byteswap
+	  with a nearby load or store and use load-and-swap or
+	  store-and-swap instructions if the architecture has them. It
+	  should almost *never* result in code which is worse than the
+	  hand-coded assembler in <asm/swab.h>.  But just in case it
+	  does, the use of the builtins is optional.
+
+	  Any architecture with load-and-swap or store-and-swap
+	  instructions should set this. And it shouldn't hurt to set it
+	  on architectures that don't have such instructions.
 
 config KRETPROBES
 	def_bool y
-	depends on KPROBES && HAVE_KRETPROBES
+	depends on KPROBES && (HAVE_KRETPROBES || HAVE_RETHOOK)
+
+config KRETPROBE_ON_RETHOOK
+	def_bool y
+	depends on HAVE_RETHOOK
+	depends on KRETPROBES
+	select RETHOOK
 
 config USER_RETURN_NOTIFIER
 	bool
@@ -195,12 +280,29 @@ config HAVE_OPTPROBES
 config HAVE_KPROBES_ON_FTRACE
 	bool
 
+config ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
+	bool
+	help
+	  Since kretprobes modifies return address on the stack, the
+	  stacktrace may see the kretprobe trampoline address instead
+	  of correct one. If the architecture stacktrace code and
+	  unwinder can adjust such entries, select this configuration.
+
 config HAVE_FUNCTION_ERROR_INJECTION
 	bool
 
 config HAVE_NMI
 	bool
 
+config HAVE_FUNCTION_DESCRIPTORS
+	bool
+
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+
+config TRACE_IRQFLAGS_NMI_SUPPORT
+	bool
+
 #
 # An arch should select this if it provides all these things:
 #
@@ -210,9 +312,8 @@ config HAVE_NMI
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h
-#	TIF_SYSCALL_TRACE	calls tracehook_report_syscall_{entry,exit}
-#	TIF_NOTIFY_RESUME	calls tracehook_notify_resume()
-#	signal delivery		calls tracehook_signal_handler()
+#	TIF_SYSCALL_TRACE	calls ptrace_report_syscall_{entry,exit}
+#	TIF_NOTIFY_RESUME	calls resume_user_mode_work()
 #
 config HAVE_ARCH_TRACEHOOK
 	bool
@@ -221,10 +322,10 @@ config HAVE_DMA_CONTIGUOUS
 	bool
 
 config GENERIC_SMP_IDLE_THREAD
-       bool
+	bool
 
 config GENERIC_IDLE_POLL_SETUP
-       bool
+	bool
 
 config ARCH_HAS_FORTIFY_SOURCE
 	bool
@@ -248,24 +349,30 @@ config ARCH_HAS_SET_DIRECT_MAP
 	bool
 
 #
-# Select if arch has an uncached kernel segment and provides the
-# uncached_kernel_address / cached_kernel_address symbols to use it
+# Select if the architecture provides the arch_dma_set_uncached symbol to
+# either provide an uncached segment alias for a DMA allocation, or
+# to remap the page tables in place.
 #
-config ARCH_HAS_UNCACHED_SEGMENT
-	select ARCH_HAS_DMA_PREP_COHERENT
+config ARCH_HAS_DMA_SET_UNCACHED
 	bool
 
-# Select if arch init_task must go in the __init_task_data section
-config ARCH_TASK_STRUCT_ON_STACK
-       bool
+#
+# Select if the architectures provides the arch_dma_clear_uncached symbol
+# to undo an in-place page table remap for uncached access.
+#
+config ARCH_HAS_DMA_CLEAR_UNCACHED
+	bool
+
+config ARCH_HAS_CPU_FINALIZE_INIT
+	bool
 
-# Select if arch has its private alloc_task_struct() function
-config ARCH_TASK_STRUCT_ALLOCATOR
+# The architecture has a per-task state that includes the mm's PASID
+config ARCH_HAS_CPU_PASID
 	bool
+	select IOMMU_MM_DATA
 
 config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	bool
-	depends on !ARCH_TASK_STRUCT_ALLOCATOR
 	help
 	  An architecture should select this to provide hardened usercopy
 	  knowledge about what region of the thread_struct should be
@@ -274,14 +381,17 @@ config HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	  should be implemented. Without this, the entire thread_struct
 	  field in task_struct will be left whitelisted.
 
-# Select if arch has its private alloc_thread_stack() function
-config ARCH_THREAD_STACK_ALLOCATOR
-	bool
-
 # Select if arch wants to size task_struct dynamically via arch_task_struct_size:
 config ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	bool
 
+config ARCH_WANTS_NO_INSTR
+	bool
+	help
+	  An architecture should select this if the noinstr macro is being used on
+	  functions to denote that the toolchain should avoid instrumenting such
+	  functions and is required for correctness.
+
 config ARCH_32BIT_OFF_T
 	bool
 	depends on !64BIT
@@ -292,17 +402,21 @@ config ARCH_32BIT_OFF_T
 	  still support 32-bit off_t. This option is enabled for all such
 	  architectures explicitly.
 
+# Selected by 64 bit architectures which have a 32 bit f_tinode in struct ustat
+config ARCH_32BIT_USTAT_F_TINODE
+	bool
+
 config HAVE_ASM_MODVERSIONS
 	bool
 	help
-	  This symbol should be selected by an architecure if it provides
+	  This symbol should be selected by an architecture if it provides
 	  <asm/asm-prototypes.h> to support the module versioning for symbols
 	  exported from assembly code.
 
 config HAVE_REGS_AND_STACK_ACCESS_API
 	bool
 	help
-	  This symbol should be selected by an architecure if it supports
+	  This symbol should be selected by an architecture if it supports
 	  the API needed to access registers and stack entries from pt_regs,
 	  declared in asm/ptrace.h
 	  For example the kprobes-based event tracer needs this API.
@@ -314,18 +428,18 @@ config HAVE_RSEQ
 	  This symbol should be selected by an architecture if it
 	  supports an implementation of restartable sequences.
 
-config HAVE_FUNCTION_ARG_ACCESS_API
+config HAVE_RUST
 	bool
 	help
-	  This symbol should be selected by an architecure if it supports
-	  the API needed to access function arguments from pt_regs,
-	  declared in asm/ptrace.h
+	  This symbol should be selected by an architecture if it
+	  supports Rust.
 
-config HAVE_CLK
+config HAVE_FUNCTION_ARG_ACCESS_API
 	bool
 	help
-	  The <linux/clk.h> calls support software clock gating and
-	  thus are a key power management tool on many systems.
+	  This symbol should be selected by an architecture if it supports
+	  the API needed to access function arguments from pt_regs,
+	  declared in asm/ptrace.h
 
 config HAVE_HW_BREAKPOINT
 	bool
@@ -359,20 +473,21 @@ config HAVE_HARDLOCKUP_DETECTOR_PERF
 	  The arch chooses to use the generic perf-NMI-based hardlockup
 	  detector. Must define HAVE_PERF_EVENTS_NMI.
 
-config HAVE_NMI_WATCHDOG
-	depends on HAVE_NMI
+config HAVE_HARDLOCKUP_DETECTOR_ARCH
 	bool
 	help
-	  The arch provides a low level NMI watchdog. It provides
-	  asm/nmi.h, and defines its own arch_touch_nmi_watchdog().
+	  The arch provides its own hardlockup detector implementation instead
+	  of the generic ones.
 
-config HAVE_HARDLOCKUP_DETECTOR_ARCH
+	  It uses the same command line parameters, and sysctl interface,
+	  as the generic hardlockup detectors.
+
+config UNWIND_USER
 	bool
-	select HAVE_NMI_WATCHDOG
-	help
-	  The arch chooses to provide its own hardlockup detector, which is
-	  a superset of the HAVE_NMI_WATCHDOG. It also conforms to config
-	  interfaces and parameters provided by hardlockup detector subsystem.
+
+config HAVE_UNWIND_USER_FP
+	bool
+	select UNWIND_USER
 
 config HAVE_PERF_REGS
 	bool
@@ -393,21 +508,84 @@ config HAVE_ARCH_JUMP_LABEL
 config HAVE_ARCH_JUMP_LABEL_RELATIVE
 	bool
 
-config HAVE_RCU_TABLE_FREE
+config MMU_GATHER_TABLE_FREE
+	bool
+
+config MMU_GATHER_RCU_TABLE_FREE
+	bool
+	select MMU_GATHER_TABLE_FREE
+
+config MMU_GATHER_PAGE_SIZE
 	bool
 
-config HAVE_RCU_TABLE_NO_INVALIDATE
+config MMU_GATHER_NO_RANGE
 	bool
+	select MMU_GATHER_MERGE_VMAS
 
-config HAVE_MMU_GATHER_PAGE_SIZE
+config MMU_GATHER_NO_FLUSH_CACHE
 	bool
 
-config HAVE_MMU_GATHER_NO_GATHER
+config MMU_GATHER_MERGE_VMAS
+	bool
+
+config MMU_GATHER_NO_GATHER
+	bool
+	depends on MMU_GATHER_TABLE_FREE
+
+config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
+	bool
+	help
+	  Temporary select until all architectures can be converted to have
+	  irqs disabled over activate_mm. Architectures that do IPI based TLB
+	  shootdowns should enable this.
+
+# Use normal mm refcounting for MMU_LAZY_TLB kernel thread references.
+# MMU_LAZY_TLB_REFCOUNT=n can improve the scalability of context switching
+# to/from kernel threads when the same mm is running on a lot of CPUs (a large
+# multi-threaded application), by reducing contention on the mm refcount.
+#
+# This can be disabled if the architecture ensures no CPUs are using an mm as a
+# "lazy tlb" beyond its final refcount (i.e., by the time __mmdrop frees the mm
+# or its kernel page tables). This could be arranged by arch_exit_mmap(), or
+# final exit(2) TLB flush, for example.
+#
+# To implement this, an arch *must*:
+# Ensure the _lazy_tlb variants of mmgrab/mmdrop are used when manipulating
+# the lazy tlb reference of a kthread's ->active_mm (non-arch code has been
+# converted already).
+config MMU_LAZY_TLB_REFCOUNT
+	def_bool y
+	depends on !MMU_LAZY_TLB_SHOOTDOWN
+
+# This option allows MMU_LAZY_TLB_REFCOUNT=n. It ensures no CPUs are using an
+# mm as a lazy tlb beyond its last reference count, by shooting down these
+# users before the mm is deallocated. __mmdrop() first IPIs all CPUs that may
+# be using the mm as a lazy tlb, so that they may switch themselves to using
+# init_mm for their active mm. mm_cpumask(mm) is used to determine which CPUs
+# may be using mm as a lazy tlb mm.
+#
+# To implement this, an arch *must*:
+# - At the time of the final mmdrop of the mm, ensure mm_cpumask(mm) contains
+#   at least all possible CPUs in which the mm is lazy.
+# - It must meet the requirements for MMU_LAZY_TLB_REFCOUNT=n (see above).
+config MMU_LAZY_TLB_SHOOTDOWN
 	bool
 
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
+config ARCH_HAVE_EXTRA_ELF_NOTES
+	bool
+	help
+	  An architecture should select this in order to enable adding an
+	  arch-specific ELF note section to core files. It must provide two
+	  functions: elf_coredump_extra_notes_size() and
+	  elf_coredump_extra_notes_write() which are invoked by the ELF core
+	  dumper.
+
+config ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
+	bool
+
 config HAVE_ALIGNED_STRUCT_PAGE
 	bool
 	help
@@ -435,10 +613,23 @@ config ARCH_WANT_OLD_COMPAT_IPC
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	bool
 
+config HAVE_ARCH_SECCOMP
+	bool
+	help
+	  An arch should select this symbol to support seccomp mode 1 (the fixed
+	  syscall policy), and must provide an overrides for __NR_seccomp_sigreturn,
+	  and compat syscalls if the asm-generic/seccomp.h defaults need adjustment:
+	  - __NR_seccomp_read_32
+	  - __NR_seccomp_write_32
+	  - __NR_seccomp_exit_32
+	  - __NR_seccomp_sigreturn_32
+
 config HAVE_ARCH_SECCOMP_FILTER
 	bool
+	select HAVE_ARCH_SECCOMP
 	help
 	  An arch should select this symbol if it provides all of these things:
+	  - all the requirements for HAVE_ARCH_SECCOMP
 	  - syscall_get_arch()
 	  - syscall_get_arguments()
 	  - syscall_rollback()
@@ -448,6 +639,26 @@ config HAVE_ARCH_SECCOMP_FILTER
 	  - secure_computing return value is checked and a return value of -1
 	    results in the system call being skipped immediately.
 	  - seccomp syscall wired up
+	  - if !HAVE_SPARSE_SYSCALL_NR, have SECCOMP_ARCH_NATIVE,
+	    SECCOMP_ARCH_NATIVE_NR, SECCOMP_ARCH_NATIVE_NAME defined. If
+	    COMPAT is supported, have the SECCOMP_ARCH_COMPAT* defines too.
+
+config SECCOMP
+	prompt "Enable seccomp to safely execute untrusted bytecode"
+	def_bool y
+	depends on HAVE_ARCH_SECCOMP
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to handle untrusted bytecode during their
+	  execution. By using pipes or other transports made available
+	  to the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in their
+	  own address space using seccomp. Once seccomp is enabled via
+	  prctl(PR_SET_SECCOMP) or the seccomp() syscall, it cannot be
+	  disabled and the task is only allowed to execute a few safe
+	  syscalls defined by each seccomp mode.
+
+	  If unsure, say Y.
 
 config SECCOMP_FILTER
 	def_bool y
@@ -459,11 +670,25 @@ config SECCOMP_FILTER
 
 	  See Documentation/userspace-api/seccomp_filter.rst for details.
 
-config HAVE_ARCH_STACKLEAK
+config SECCOMP_CACHE_DEBUG
+	bool "Show seccomp filter cache status in /proc/pid/seccomp_cache"
+	depends on SECCOMP_FILTER && !HAVE_SPARSE_SYSCALL_NR
+	depends on PROC_FS
+	help
+	  This enables the /proc/pid/seccomp_cache interface to monitor
+	  seccomp cache data. The file format is subject to change. Reading
+	  the file requires CAP_SYS_ADMIN.
+
+	  This option is for debugging only. Enabling presents the risk that
+	  an adversary may be able to infer the seccomp filter logic.
+
+	  If unsure, say N.
+
+config HAVE_ARCH_KSTACK_ERASE
 	bool
 	help
 	  An architecture should select this if it has the code which
-	  fills the used part of the kernel stack with the STACKLEAK_POISON
+	  fills the used part of the kernel stack with the KSTACK_ERASE_POISON
 	  value before returning from system calls.
 
 config HAVE_STACKPROTECTOR
@@ -472,9 +697,6 @@ config HAVE_STACKPROTECTOR
 	  An arch should select this symbol if:
 	  - it has implemented a stack canary (e.g. __stack_chk_guard)
 
-config CC_HAS_STACKPROTECTOR_NONE
-	def_bool $(cc-option,-fno-stack-protector)
-
 config STACKPROTECTOR
 	bool "Stack Protector buffer overflow detection"
 	depends on HAVE_STACKPROTECTOR
@@ -521,6 +743,242 @@ config STACKPROTECTOR_STRONG
 	  about 20% of all kernel functions, which increases the kernel code
 	  size by about 2%.
 
+config ARCH_SUPPORTS_SHADOW_CALL_STACK
+	bool
+	help
+	  An architecture should select this if it supports the compiler's
+	  Shadow Call Stack and implements runtime support for shadow stack
+	  switching.
+
+config SHADOW_CALL_STACK
+	bool "Shadow Call Stack"
+	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
+	depends on DYNAMIC_FTRACE_WITH_ARGS || DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
+	depends on MMU
+	help
+	  This option enables the compiler's Shadow Call Stack, which
+	  uses a shadow stack to protect function return addresses from
+	  being overwritten by an attacker. More information can be found
+	  in the compiler's documentation:
+
+	  - Clang: https://clang.llvm.org/docs/ShadowCallStack.html
+	  - GCC: https://gcc.gnu.org/onlinedocs/gcc/Instrumentation-Options.html#Instrumentation-Options
+
+	  Note that security guarantees in the kernel differ from the
+	  ones documented for user space. The kernel must store addresses
+	  of shadow stacks in memory, which means an attacker capable of
+	  reading and writing arbitrary memory may be able to locate them
+	  and hijack control flow by modifying the stacks.
+
+config DYNAMIC_SCS
+	bool
+	help
+	  Set by the arch code if it relies on code patching to insert the
+	  shadow call stack push and pop instructions rather than on the
+	  compiler.
+
+config LTO
+	bool
+	help
+	  Selected if the kernel will be built using the compiler's LTO feature.
+
+config LTO_CLANG
+	bool
+	select LTO
+	help
+	  Selected if the kernel will be built using Clang's LTO feature.
+
+config ARCH_SUPPORTS_LTO_CLANG
+	bool
+	help
+	  An architecture should select this option if it supports:
+	  - compiling with Clang,
+	  - compiling inline assembly with Clang's integrated assembler,
+	  - and linking with LLD.
+
+config ARCH_SUPPORTS_LTO_CLANG_THIN
+	bool
+	help
+	  An architecture should select this option if it can support Clang's
+	  ThinLTO mode.
+
+config HAS_LTO_CLANG
+	def_bool y
+	depends on CC_IS_CLANG && LD_IS_LLD && AS_IS_LLVM
+	depends on $(success,$(NM) --help | head -n 1 | grep -qi llvm)
+	depends on $(success,$(AR) --help | head -n 1 | grep -qi llvm)
+	depends on ARCH_SUPPORTS_LTO_CLANG
+	depends on !FTRACE_MCOUNT_USE_RECORDMCOUNT
+	# https://github.com/ClangBuiltLinux/linux/issues/1721
+	depends on (!KASAN || KASAN_HW_TAGS || CLANG_VERSION >= 170000) || !DEBUG_INFO
+	depends on (!KCOV || CLANG_VERSION >= 170000) || !DEBUG_INFO
+	depends on !GCOV_KERNEL
+	help
+	  The compiler and Kconfig options support building with Clang's
+	  LTO.
+
+choice
+	prompt "Link Time Optimization (LTO)"
+	default LTO_NONE
+	help
+	  This option enables Link Time Optimization (LTO), which allows the
+	  compiler to optimize binaries globally.
+
+	  If unsure, select LTO_NONE. Note that LTO is very resource-intensive
+	  so it's disabled by default.
+
+config LTO_NONE
+	bool "None"
+	help
+	  Build the kernel normally, without Link Time Optimization (LTO).
+
+config LTO_CLANG_FULL
+	bool "Clang Full LTO (EXPERIMENTAL)"
+	depends on HAS_LTO_CLANG
+	depends on !COMPILE_TEST
+	select LTO_CLANG
+	help
+	  This option enables Clang's full Link Time Optimization (LTO), which
+	  allows the compiler to optimize the kernel globally. If you enable
+	  this option, the compiler generates LLVM bitcode instead of ELF
+	  object files, and the actual compilation from bitcode happens at
+	  the LTO link step, which may take several minutes depending on the
+	  kernel configuration. More information can be found from LLVM's
+	  documentation:
+
+	    https://llvm.org/docs/LinkTimeOptimization.html
+
+	  During link time, this option can use a large amount of RAM, and
+	  may take much longer than the ThinLTO option.
+
+config LTO_CLANG_THIN
+	bool "Clang ThinLTO (EXPERIMENTAL)"
+	depends on HAS_LTO_CLANG && ARCH_SUPPORTS_LTO_CLANG_THIN
+	select LTO_CLANG
+	help
+	  This option enables Clang's ThinLTO, which allows for parallel
+	  optimization and faster incremental compiles compared to the
+	  CONFIG_LTO_CLANG_FULL option. More information can be found
+	  from Clang's documentation:
+
+	    https://clang.llvm.org/docs/ThinLTO.html
+
+	  If unsure, say Y.
+endchoice
+
+config ARCH_SUPPORTS_AUTOFDO_CLANG
+	bool
+
+config AUTOFDO_CLANG
+	bool "Enable Clang's AutoFDO build (EXPERIMENTAL)"
+	depends on ARCH_SUPPORTS_AUTOFDO_CLANG
+	depends on CC_IS_CLANG && CLANG_VERSION >= 170000
+	help
+	  This option enables Clang’s AutoFDO build. When
+	  an AutoFDO profile is specified in variable
+	  CLANG_AUTOFDO_PROFILE during the build process,
+	  Clang uses the profile to optimize the kernel.
+
+	  If no profile is specified, AutoFDO options are
+	  still passed to Clang to facilitate the collection
+	  of perf data for creating an AutoFDO profile in
+	  subsequent builds.
+
+	  If unsure, say N.
+
+config ARCH_SUPPORTS_PROPELLER_CLANG
+	bool
+
+config PROPELLER_CLANG
+	bool "Enable Clang's Propeller build"
+	depends on ARCH_SUPPORTS_PROPELLER_CLANG
+	depends on CC_IS_CLANG && CLANG_VERSION >= 190000
+	help
+	  This option enables Clang’s Propeller build. When the Propeller
+	  profiles is specified in variable CLANG_PROPELLER_PROFILE_PREFIX
+	  during the build process, Clang uses the profiles to optimize
+	  the kernel.
+
+	  If no profile is specified, Propeller options are still passed
+	  to Clang to facilitate the collection of perf data for creating
+	  the Propeller profiles in subsequent builds.
+
+	  If unsure, say N.
+
+config ARCH_SUPPORTS_CFI
+	bool
+	help
+	  An architecture should select this option if it can support Kernel
+	  Control-Flow Integrity (CFI) checking (-fsanitize=kcfi).
+
+config ARCH_USES_CFI_TRAPS
+	bool
+	help
+	  An architecture should select this option if it requires the
+	  .kcfi_traps section for KCFI trap handling.
+
+config CFI
+	bool "Use Kernel Control Flow Integrity (kCFI)"
+	default CFI_CLANG
+	depends on ARCH_SUPPORTS_CFI
+	depends on $(cc-option,-fsanitize=kcfi)
+	help
+	  This option enables forward-edge Control Flow Integrity (CFI)
+	  checking, where the compiler injects a runtime check to each
+	  indirect function call to ensure the target is a valid function with
+	  the correct static type. This restricts possible call targets and
+	  makes it more difficult for an attacker to exploit bugs that allow
+	  the modification of stored function pointers. More information can be
+	  found from Clang's documentation:
+
+	    https://clang.llvm.org/docs/ControlFlowIntegrity.html
+
+config CFI_CLANG
+	bool
+	transitional
+	help
+	  Transitional config for CFI_CLANG to CFI migration.
+
+config CFI_ICALL_NORMALIZE_INTEGERS
+	bool "Normalize CFI tags for integers"
+	depends on CFI
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	help
+	  This option normalizes the CFI tags for integer types so that all
+	  integer types of the same size and signedness receive the same CFI
+	  tag.
+
+	  The option is separate from CONFIG_RUST because it affects the ABI.
+	  When working with build systems that care about the ABI, it is
+	  convenient to be able to turn on this flag first, before Rust is
+	  turned on.
+
+	  This option is necessary for using CFI with Rust. If unsure, say N.
+
+config HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	def_bool y
+	depends on $(cc-option,-fsanitize=kcfi -fsanitize-cfi-icall-experimental-normalize-integers)
+	# With GCOV/KASAN we need this fix: https://github.com/llvm/llvm-project/pull/104826
+	depends on CLANG_VERSION >= 190103 || (!GCOV_KERNEL && !KASAN_GENERIC && !KASAN_SW_TAGS)
+
+config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC
+	def_bool y
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
+	depends on RUSTC_VERSION >= 107900
+	# With GCOV/KASAN we need this fix: https://github.com/rust-lang/rust/pull/129373
+	depends on (RUSTC_LLVM_VERSION >= 190103 && RUSTC_VERSION >= 108200) || \
+		(!GCOV_KERNEL && !KASAN_GENERIC && !KASAN_SW_TAGS)
+
+config CFI_PERMISSIVE
+	bool "Use CFI in permissive mode"
+	depends on CFI
+	help
+	  When selected, Control Flow Integrity (CFI) violations result in a
+	  warning instead of a kernel panic. This option should only be used
+	  for finding indirect call type mismatches during development.
+
+	  If unsure, say N.
+
 config HAVE_ARCH_WITHIN_STACK_FRAMES
 	bool
 	help
@@ -530,20 +988,49 @@ config HAVE_ARCH_WITHIN_STACK_FRAMES
 	  and similar) by implementing an inline arch_within_stack_frames(),
 	  which is used by CONFIG_HARDENED_USERCOPY.
 
-config HAVE_CONTEXT_TRACKING
+config HAVE_CONTEXT_TRACKING_USER
 	bool
 	help
 	  Provide kernel/user boundaries probes necessary for subsystems
 	  that need it, such as userspace RCU extended quiescent state.
-	  Syscalls need to be wrapped inside user_exit()-user_enter() through
-	  the slow path using TIF_NOHZ flag. Exceptions handlers must be
-	  wrapped as well. Irqs are already protected inside
-	  rcu_irq_enter/rcu_irq_exit() but preemption or signal handling on
-	  irq exit still need to be protected.
+	  Syscalls need to be wrapped inside user_exit()-user_enter(), either
+	  optimized behind static key or through the slow path using TIF_NOHZ
+	  flag. Exceptions handlers must be wrapped as well. Irqs are already
+	  protected inside ct_irq_enter/ct_irq_exit() but preemption or signal
+	  handling on irq exit still need to be protected.
+
+config HAVE_CONTEXT_TRACKING_USER_OFFSTACK
+	bool
+	help
+	  Architecture neither relies on exception_enter()/exception_exit()
+	  nor on schedule_user(). Also preempt_schedule_notrace() and
+	  preempt_schedule_irq() can't be called in a preemptible section
+	  while context tracking is CT_STATE_USER. This feature reflects a sane
+	  entry implementation where the following requirements are met on
+	  critical entry code, ie: before user_exit() or after user_enter():
+
+	  - Critical entry code isn't preemptible (or better yet:
+	    not interruptible).
+	  - No use of RCU read side critical sections, unless ct_nmi_enter()
+	    got called.
+	  - No use of instrumentation, unless instrumentation_begin() got
+	    called.
+
+config HAVE_TIF_NOHZ
+	bool
+	help
+	  Arch relies on TIF_NOHZ and syscall slow path to implement context
+	  tracking calls to user_enter()/user_exit().
 
 config HAVE_VIRT_CPU_ACCOUNTING
 	bool
 
+config HAVE_VIRT_CPU_ACCOUNTING_IDLE
+	bool
+	help
+	  Architecture has its own way to account idle CPU time and therefore
+	  doesn't implement vtime_account_idle().
+
 config ARCH_HAS_SCALED_CPUTIME
 	bool
 
@@ -558,13 +1045,19 @@ config HAVE_VIRT_CPU_ACCOUNTING_GEN
 	  some 32-bit arches may require multiple accesses, so proper
 	  locking is needed to protect against concurrent accesses.
 
-
 config HAVE_IRQ_TIME_ACCOUNTING
 	bool
 	help
 	  Archs need to ensure they use a high enough resolution clock to
 	  support irq time accounting and then call enable_sched_clock_irqtime().
 
+config HAVE_MOVE_PUD
+	bool
+	help
+	  Architectures that select this are able to move page tables at the
+	  PUD level. If there are only 3 page table levels, the move effectively
+	  happens at the PGD level.
+
 config HAVE_MOVE_PMD
 	bool
 	help
@@ -579,9 +1072,26 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
 config HAVE_ARCH_HUGE_VMAP
 	bool
 
+#
+#  Archs that select this would be capable of PMD-sized vmaps (i.e.,
+#  arch_vmap_pmd_supported() returns true). The VM_ALLOW_HUGE_VMAP flag
+#  must be used to enable allocations to use hugepages.
+#
+config HAVE_ARCH_HUGE_VMALLOC
+	depends on HAVE_ARCH_HUGE_VMAP
+	bool
+
 config ARCH_WANT_HUGE_PMD_SHARE
 	bool
 
+# Archs that want to use pmd_mkwrite on kernel memory need it defined even
+# if there are no userspace memory management features that use it
+config ARCH_WANT_KERNEL_PMD_MKWRITE
+	bool
+
+config ARCH_WANT_PMD_MKWRITE
+	def_bool TRANSPARENT_HUGEPAGE || ARCH_WANT_KERNEL_PMD_MKWRITE
+
 config HAVE_ARCH_SOFT_DIRTY
 	bool
 
@@ -604,6 +1114,28 @@ config MODULES_USE_ELF_REL
 	  Modules only use ELF REL relocations.  Modules with ELF RELA
 	  relocations will give an error.
 
+config ARCH_WANTS_MODULES_DATA_IN_VMALLOC
+	bool
+	help
+	  For architectures like powerpc/32 which have constraints on module
+	  allocation and need to allocate module data outside of module area.
+
+config ARCH_WANTS_EXECMEM_LATE
+	bool
+	help
+	  For architectures that do not allocate executable memory early on
+	  boot, but rather require its initialization late when there is
+	  enough entropy for module space randomization, for instance
+	  arm64.
+
+config ARCH_HAS_EXECMEM_ROX
+	bool
+	depends on MMU && !HIGHMEM
+	help
+	  For architectures that support allocations of executable memory
+	  with read-only execute permissions. Architecture must implement
+	  execmem_fill_trapping_insns() callback to enable this.
+
 config HAVE_IRQ_EXIT_ON_IRQ_STACK
 	bool
 	help
@@ -614,6 +1146,22 @@ config HAVE_IRQ_EXIT_ON_IRQ_STACK
 	  This spares a stack switch and improves cache usage on softirq
 	  processing.
 
+config HAVE_SOFTIRQ_ON_OWN_STACK
+	bool
+	help
+	  Architecture provides a function to run __do_softirq() on a
+	  separate stack.
+
+config SOFTIRQ_ON_OWN_STACK
+	def_bool HAVE_SOFTIRQ_ON_OWN_STACK && !PREEMPT_RT
+
+config ALTERNATE_USER_ADDRESS_SPACE
+	bool
+	help
+	  Architectures set this when the CPU uses separate address
+	  spaces for kernel and user space pointers. In this case, the
+	  access_ok() check on a __user pointer is skipped.
+
 config PGTABLE_LEVELS
 	int
 	default 2
@@ -706,6 +1254,107 @@ config HAVE_ARCH_COMPAT_MMAP_BASES
 	  and vice-versa 32-bit applications to call 64-bit mmap().
 	  Required for applications doing different bitness syscalls.
 
+config HAVE_PAGE_SIZE_4KB
+	bool
+
+config HAVE_PAGE_SIZE_8KB
+	bool
+
+config HAVE_PAGE_SIZE_16KB
+	bool
+
+config HAVE_PAGE_SIZE_32KB
+	bool
+
+config HAVE_PAGE_SIZE_64KB
+	bool
+
+config HAVE_PAGE_SIZE_256KB
+	bool
+
+choice
+	prompt "MMU page size"
+
+config PAGE_SIZE_4KB
+	bool "4KiB pages"
+	depends on HAVE_PAGE_SIZE_4KB
+	help
+	  This option select the standard 4KiB Linux page size and the only
+	  available option on many architectures. Using 4KiB page size will
+	  minimize memory consumption and is therefore recommended for low
+	  memory systems.
+	  Some software that is written for x86 systems makes incorrect
+	  assumptions about the page size and only runs on 4KiB pages.
+
+config PAGE_SIZE_8KB
+	bool "8KiB pages"
+	depends on HAVE_PAGE_SIZE_8KB
+	help
+	  This option is the only supported page size on a few older
+	  processors, and can be slightly faster than 4KiB pages.
+
+config PAGE_SIZE_16KB
+	bool "16KiB pages"
+	depends on HAVE_PAGE_SIZE_16KB
+	help
+	  This option is usually a good compromise between memory
+	  consumption and performance for typical desktop and server
+	  workloads, often saving a level of page table lookups compared
+	  to 4KB pages as well as reducing TLB pressure and overhead of
+	  per-page operations in the kernel at the expense of a larger
+	  page cache.
+
+config PAGE_SIZE_32KB
+	bool "32KiB pages"
+	depends on HAVE_PAGE_SIZE_32KB
+	help
+	  Using 32KiB page size will result in slightly higher performance
+	  kernel at the price of higher memory consumption compared to
+	  16KiB pages.	This option is available only on cnMIPS cores.
+	  Note that you will need a suitable Linux distribution to
+	  support this.
+
+config PAGE_SIZE_64KB
+	bool "64KiB pages"
+	depends on HAVE_PAGE_SIZE_64KB
+	help
+	  Using 64KiB page size will result in slightly higher performance
+	  kernel at the price of much higher memory consumption compared to
+	  4KiB or 16KiB pages.
+	  This is not suitable for general-purpose workloads but the
+	  better performance may be worth the cost for certain types of
+	  supercomputing or database applications that work mostly with
+	  large in-memory data rather than small files.
+
+config PAGE_SIZE_256KB
+	bool "256KiB pages"
+	depends on HAVE_PAGE_SIZE_256KB
+	help
+	  256KiB pages have little practical value due to their extreme
+	  memory usage.  The kernel will only be able to run applications
+	  that have been compiled with '-zmax-page-size' set to 256KiB
+	  (the default is 64KiB or 4KiB on most architectures).
+
+endchoice
+
+config PAGE_SIZE_LESS_THAN_64KB
+	def_bool y
+	depends on !PAGE_SIZE_64KB
+	depends on PAGE_SIZE_LESS_THAN_256KB
+
+config PAGE_SIZE_LESS_THAN_256KB
+	def_bool y
+	depends on !PAGE_SIZE_256KB
+
+config PAGE_SHIFT
+	int
+	default	12 if PAGE_SIZE_4KB
+	default	13 if PAGE_SIZE_8KB
+	default	14 if PAGE_SIZE_16KB
+	default	15 if PAGE_SIZE_32KB
+	default	16 if PAGE_SIZE_64KB
+	default	18 if PAGE_SIZE_256KB
+
 # This allows to use a set of generic functions to determine mmap base
 # address by giving priority to top-down scheme only if the process
 # is not in legacy mode (compat task, unlimited stack size or
@@ -717,24 +1366,34 @@ config ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
 	depends on MMU
 	select ARCH_HAS_ELF_RANDOMIZE
 
-config HAVE_COPY_THREAD_TLS
+config HAVE_OBJTOOL
+	bool
+
+config HAVE_JUMP_LABEL_HACK
+	bool
+
+config HAVE_NOINSTR_HACK
+	bool
+
+config HAVE_NOINSTR_VALIDATION
 	bool
-	help
-	  Architecture provides copy_thread_tls to accept tls argument via
-	  normal C parameter passing, rather than extracting the syscall
-	  argument from pt_regs.
+
+config HAVE_UACCESS_VALIDATION
+	bool
+	select OBJTOOL
 
 config HAVE_STACK_VALIDATION
 	bool
 	help
-	  Architecture supports the 'objtool check' host tool command, which
-	  performs compile-time stack metadata validation.
+	  Architecture supports objtool compile-time frame pointer rule
+	  validation.
 
 config HAVE_RELIABLE_STACKTRACE
 	bool
 	help
-	  Architecture has a save_stack_trace_tsk_reliable() function which
-	  only returns a stack trace if it can guarantee the trace is reliable.
+	  Architecture has either save_stack_trace_tsk_reliable() or
+	  arch_stack_walk_reliable() function which only returns a stack trace
+	  if it can guarantee the trace is reliable.
 
 config HAVE_ARCH_HASH
 	bool
@@ -796,16 +1455,9 @@ config OLD_SIGACTION
 config COMPAT_OLD_SIGACTION
 	bool
 
-config 64BIT_TIME
-	def_bool y
-	help
-	  This should be selected by all architectures that need to support
-	  new system calls with a 64-bit time_t. This is relevant on all 32-bit
-	  architectures, and 64-bit architectures as part of compat syscall
-	  handling.
-
 config COMPAT_32BIT_TIME
-	def_bool !64BIT || COMPAT
+	bool "Provide system calls for 32-bit time_t"
+	default !64BIT || COMPAT
 	help
 	  This enables 32 bit time_t support in addition to 64 bit time_t support.
 	  This is relevant on all 32-bit architectures, and 64-bit architectures
@@ -843,16 +1495,53 @@ config HAVE_ARCH_VMAP_STACK
 config VMAP_STACK
 	default y
 	bool "Use a virtually-mapped stack"
-	depends on HAVE_ARCH_VMAP_STACK && !KASAN
-	---help---
+	depends on HAVE_ARCH_VMAP_STACK
+	depends on !KASAN || KASAN_HW_TAGS || KASAN_VMALLOC
+	help
 	  Enable this if you want the use virtually-mapped kernel stacks
 	  with guard pages.  This causes kernel stack overflows to be
 	  caught immediately rather than causing difficult-to-diagnose
 	  corruption.
 
-	  This is presently incompatible with KASAN because KASAN expects
-	  the stack to map directly to the KASAN shadow map using a formula
-	  that is incorrect if the stack is in vmalloc space.
+	  To use this with software KASAN modes, the architecture must support
+	  backing virtual mappings with real shadow memory, and KASAN_VMALLOC
+	  must be enabled.
+
+config HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+	def_bool n
+	help
+	  An arch should select this symbol if it can support kernel stack
+	  offset randomization with calls to add_random_kstack_offset()
+	  during syscall entry and choose_random_kstack_offset() during
+	  syscall exit. Careful removal of -fstack-protector-strong and
+	  -fstack-protector should also be applied to the entry code and
+	  closely examined, as the artificial stack bump looks like an array
+	  to the compiler, so it will attempt to add canary checks regardless
+	  of the static branch state.
+
+config RANDOMIZE_KSTACK_OFFSET
+	bool "Support for randomizing kernel stack offset on syscall entry" if EXPERT
+	default y
+	depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+	help
+	  The kernel stack offset can be randomized (after pt_regs) by
+	  roughly 5 bits of entropy, frustrating memory corruption
+	  attacks that depend on stack address determinism or
+	  cross-syscall address exposures.
+
+	  The feature is controlled via the "randomize_kstack_offset=on/off"
+	  kernel boot param, and if turned off has zero overhead due to its use
+	  of static branches (see JUMP_LABEL).
+
+	  If unsure, say Y.
+
+config RANDOMIZE_KSTACK_OFFSET_DEFAULT
+	bool "Default state of kernel stack offset randomization"
+	depends on RANDOMIZE_KSTACK_OFFSET
+	help
+	  Kernel stack offset randomization is controlled by kernel boot param
+	  "randomize_kstack_offset=on/off", and this config chooses the default
+	  boot state.
 
 config ARCH_OPTIONAL_KERNEL_RWX
 	def_bool n
@@ -892,26 +1581,13 @@ config STRICT_MODULE_RWX
 config ARCH_HAS_PHYS_TO_DMA
 	bool
 
-config ARCH_HAS_REFCOUNT
+config ARCH_HAS_CPU_RESCTRL
 	bool
 	help
-	  An architecture selects this when it has implemented refcount_t
-	  using open coded assembly primitives that provide an optimized
-	  refcount_t implementation, possibly at the expense of some full
-	  refcount state checks of CONFIG_REFCOUNT_FULL=y.
-
-	  The refcount overflow check behavior, however, must be retained.
-	  Catching overflows is the primary security concern for protecting
-	  against bugs in reference counts.
-
-config REFCOUNT_FULL
-	bool "Perform full reference count validation at the expense of speed"
-	help
-	  Enabling this switches the refcounting infrastructure from a fast
-	  unchecked atomic_t implementation to a fully state checked
-	  implementation, which can be (slightly) slower but provides protections
-	  against various use-after-free conditions that can be used in
-	  security flaw exploits.
+	  An architecture selects this option to indicate that the necessary
+	  hooks are provided to support the common memory system usage
+	  monitoring and control interfaces provided by the 'resctrl'
+	  filesystem (see RESCTRL_FS).
 
 config HAVE_ARCH_COMPILER_H
 	bool
@@ -921,6 +1597,14 @@ config HAVE_ARCH_COMPILER_H
 	  linux/compiler-*.h in order to override macro definitions that those
 	  headers generally provide.
 
+config HAVE_ARCH_LIBGCC_H
+	bool
+	help
+	  An architecture can select this if it provides an
+	  asm/libgcc.h header that should be included after
+	  linux/libgcc.h in order to override macro definitions that
+	  header generally provides.
+
 config HAVE_ARCH_PREL32_RELOCATIONS
 	bool
 	help
@@ -937,7 +1621,7 @@ config ARCH_USE_MEMREMAP_PROT
 config LOCK_EVENT_COUNTS
 	bool "Locking event counts collection"
 	depends on DEBUG_FS
-	---help---
+	help
 	  Enable light-weight counting of various locking related events
 	  in the system with minimal performance impact. This reduces
 	  the chance of application behavior change because of timing
@@ -960,8 +1644,193 @@ config RELR
 config ARCH_HAS_MEM_ENCRYPT
 	bool
 
+config ARCH_HAS_CC_PLATFORM
+	bool
+
+config HAVE_SPARSE_SYSCALL_NR
+	bool
+	help
+	  An architecture should select this if its syscall numbering is sparse
+	  to save space. For example, MIPS architecture has a syscall array with
+	  entries at 4000, 5000 and 6000 locations. This option turns on syscall
+	  related optimizations for a given architecture.
+
+config ARCH_HAS_VDSO_ARCH_DATA
+	depends on HAVE_GENERIC_VDSO
+	bool
+
+config ARCH_HAS_VDSO_TIME_DATA
+	bool
+
+config HAVE_STATIC_CALL
+	bool
+
+config HAVE_STATIC_CALL_INLINE
+	bool
+	depends on HAVE_STATIC_CALL
+	select OBJTOOL
+
+config HAVE_PREEMPT_DYNAMIC
+	bool
+
+config HAVE_PREEMPT_DYNAMIC_CALL
+	bool
+	depends on HAVE_STATIC_CALL
+	select HAVE_PREEMPT_DYNAMIC
+	help
+	  An architecture should select this if it can handle the preemption
+	  model being selected at boot time using static calls.
+
+	  Where an architecture selects HAVE_STATIC_CALL_INLINE, any call to a
+	  preemption function will be patched directly.
+
+	  Where an architecture does not select HAVE_STATIC_CALL_INLINE, any
+	  call to a preemption function will go through a trampoline, and the
+	  trampoline will be patched.
+
+	  It is strongly advised to support inline static call to avoid any
+	  overhead.
+
+config HAVE_PREEMPT_DYNAMIC_KEY
+	bool
+	depends on HAVE_ARCH_JUMP_LABEL
+	select HAVE_PREEMPT_DYNAMIC
+	help
+	  An architecture should select this if it can handle the preemption
+	  model being selected at boot time using static keys.
+
+	  Each preemption function will be given an early return based on a
+	  static key. This should have slightly lower overhead than non-inline
+	  static calls, as this effectively inlines each trampoline into the
+	  start of its callee. This may avoid redundant work, and may
+	  integrate better with CFI schemes.
+
+	  This will have greater overhead than using inline static calls as
+	  the call to the preemption function cannot be entirely elided.
+
+config ARCH_WANT_LD_ORPHAN_WARN
+	bool
+	help
+	  An arch should select this symbol once all linker sections are explicitly
+	  included, size-asserted, or discarded in the linker scripts. This is
+	  important because we never want expected sections to be placed heuristically
+	  by the linker, since the locations of such sections can change between linker
+	  versions.
+
+config HAVE_ARCH_PFN_VALID
+	bool
+
+config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+	bool
+
+config ARCH_SUPPORTS_PAGE_TABLE_CHECK
+	bool
+
+config ARCH_SPLIT_ARG64
+	bool
+	help
+	  If a 32-bit architecture requires 64-bit arguments to be split into
+	  pairs of 32-bit arguments, select this option.
+
+config ARCH_HAS_ELFCORE_COMPAT
+	bool
+
+config ARCH_HAS_PARANOID_L1D_FLUSH
+	bool
+
+config ARCH_HAVE_TRACE_MMIO_ACCESS
+	bool
+
+config DYNAMIC_SIGFRAME
+	bool
+
+# Select, if arch has a named attribute group bound to NUMA device nodes.
+config HAVE_ARCH_NODE_DEV_GROUP
+	bool
+
+config ARCH_HAS_HW_PTE_YOUNG
+	bool
+	help
+	  Architectures that select this option are capable of setting the
+	  accessed bit in PTE entries when using them as part of linear address
+	  translations. Architectures that require runtime check should select
+	  this option and override arch_has_hw_pte_young().
+
+config ARCH_HAS_NONLEAF_PMD_YOUNG
+	bool
+	help
+	  Architectures that select this option are capable of setting the
+	  accessed bit in non-leaf PMD entries when using them as part of linear
+	  address translations. Page table walkers that clear the accessed bit
+	  may use this capability to reduce their search space.
+
+config ARCH_HAS_KERNEL_FPU_SUPPORT
+	bool
+	help
+	  Architectures that select this option can run floating-point code in
+	  the kernel, as described in Documentation/core-api/floating-point.rst.
+
+config ARCH_VMLINUX_NEEDS_RELOCS
+	bool
+	help
+	  Whether the architecture needs vmlinux to be built with static
+	  relocations preserved. This is used by some architectures to
+	  construct bespoke relocation tables for KASLR.
+
+# Select if architecture uses the common generic TIF bits
+config HAVE_GENERIC_TIF_BITS
+       bool
+
 source "kernel/gcov/Kconfig"
 
 source "scripts/gcc-plugins/Kconfig"
 
+config FUNCTION_ALIGNMENT_4B
+	bool
+
+config FUNCTION_ALIGNMENT_8B
+	bool
+
+config FUNCTION_ALIGNMENT_16B
+	bool
+
+config FUNCTION_ALIGNMENT_32B
+	bool
+
+config FUNCTION_ALIGNMENT_64B
+	bool
+
+config FUNCTION_ALIGNMENT
+	int
+	default 64 if FUNCTION_ALIGNMENT_64B
+	default 32 if FUNCTION_ALIGNMENT_32B
+	default 16 if FUNCTION_ALIGNMENT_16B
+	default 8 if FUNCTION_ALIGNMENT_8B
+	default 4 if FUNCTION_ALIGNMENT_4B
+	default 0
+
+config CC_HAS_MIN_FUNCTION_ALIGNMENT
+	# Detect availability of the GCC option -fmin-function-alignment which
+	# guarantees minimal alignment for all functions, unlike
+	# -falign-functions which the compiler ignores for cold functions.
+	def_bool $(cc-option, -fmin-function-alignment=8)
+
+config CC_HAS_SANE_FUNCTION_ALIGNMENT
+	# Set if the guaranteed alignment with -fmin-function-alignment is
+	# available or extra care is required in the kernel. Clang provides
+	# strict alignment always, even with -falign-functions.
+	def_bool CC_HAS_MIN_FUNCTION_ALIGNMENT || CC_IS_CLANG
+
+config ARCH_NEED_CMPXCHG_1_EMU
+	bool
+
+config ARCH_WANTS_PRE_LINK_VMLINUX
+	bool
+	help
+	  An architecture can select this if it provides arch/<arch>/tools/Makefile
+	  with .arch.vmlinux.o target to be linked into vmlinux.
+
+config ARCH_HAS_CPU_ATTACK_VECTORS
+	bool
+
 endmenu
diff --git a/arch/alpha/Kbuild b/arch/alpha/Kbuild
new file mode 100644
index 000000000000..345d79df24bb
--- /dev/null
+++ b/arch/alpha/Kbuild
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y			+= kernel/ mm/
+obj-$(CONFIG_MATHEMU)	+= math-emu/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index ef179033a7c2..80367f2cf821 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -2,42 +2,44 @@
 config ALPHA
 	bool
 	default y
+	select ARCH_32BIT_USTAT_F_TINODE
+	select ARCH_HAS_CURRENT_STACK_POINTER
+	select ARCH_HAS_DMA_OPS if PCI
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
+	select ARCH_MODULE_NEEDS_WEAK_PER_CPU if SMP
 	select ARCH_NO_PREEMPT
 	select ARCH_NO_SG_CHAIN
 	select ARCH_USE_CMPXCHG_LOCKREF
-	select FORCE_PCI if !ALPHA_JENSEN
+	select FORCE_PCI
 	select PCI_DOMAINS if PCI
 	select PCI_SYSCALL if PCI
-	select HAVE_AOUT
 	select HAVE_ASM_MODVERSIONS
-	select HAVE_IDE
-	select HAVE_OPROFILE
+	select HAVE_PAGE_SIZE_8KB
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
-	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
-	select GENERIC_PCI_IOMAP if PCI
+	select GENERIC_PCI_IOMAP
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select AUDIT_ARCH
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_MOD_ARCH_SPECIFIC
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select ODD_RT_SIGACTION
 	select OLD_SIGSUSPEND
 	select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
 	select MMU_GATHER_NO_RANGE
+	select SPARSEMEM_EXTREME if SPARSEMEM
+	select ZONE_DMA
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,
@@ -63,10 +65,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config ZONE_DMA
-	bool
-	default y
-
 config GENERIC_ISA_DMA
 	bool
 	default y
@@ -83,7 +81,7 @@ menu "System setup"
 choice
 	prompt "Alpha system type"
 	default ALPHA_GENERIC
-	---help---
+	help
 	  This is the system type of your hardware.  A "generic" kernel will
 	  run on any supported Alpha system. However, if you configure a
 	  kernel for your specific system, it will be faster and smaller.
@@ -93,22 +91,11 @@ choice
 	  <http://www.alphalinux.org/>. In summary:
 
 	  Alcor/Alpha-XLT     AS 600, AS 500, XL-300, XL-366
-	  Alpha-XL            XL-233, XL-266
-	  AlphaBook1          Alpha laptop
-	  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
-	  Cabriolet           AlphaPC64, AlphaPCI64
 	  DP264               DP264 / DS20 / ES40 / DS10 / DS10L
-	  EB164               EB164 21164 evaluation board
-	  EB64+               EB64+ 21064 evaluation board
-	  EB66                EB66 21066 evaluation board
-	  EB66+               EB66+ 21066 evaluation board
-	  Jensen              DECpc 150, DEC 2000 models 300, 500
 	  LX164               AlphaPC164-LX
-	  Lynx                AS 2100A
 	  Miata               Personal Workstation 433/500/600 a/au
 	  Marvel              AlphaServer ES47 / ES80 / GS1280
 	  Mikasa              AS 1000
-	  Noname              AXPpci33, UDB (Multia)
 	  Noritake            AS 1000A, AS 600A, AS 800
 	  PC164               AlphaPC164
 	  Rawhide             AS 1200, AS 4000, AS 4100
@@ -140,27 +127,6 @@ config ALPHA_ALCOR
 	  all the work required to support an external Bcache and to maintain
 	  memory coherence when a PCI device DMAs into (or out of) memory.
 
-config ALPHA_XL
-	bool "Alpha-XL"
-	help
-	  XL-233 and XL-266-based Alpha systems.
-
-config ALPHA_BOOK1
-	bool "AlphaBook1"
-	help
-	  Dec AlphaBook1/Burns Alpha-based laptops.
-
-config ALPHA_AVANTI_CH
-	bool "Avanti"
-
-config ALPHA_CABRIOLET
-	bool "Cabriolet"
-	help
-	  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
-	  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
-	  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
-	  Bcache SIMMs.  Requires power supply with 3.3V output.
-
 config ALPHA_DP264
 	bool "DP264"
 	help
@@ -168,63 +134,18 @@ config ALPHA_DP264
 	  API Networks: 264DP, UP2000(+), CS20;
 	  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
 
-config ALPHA_EB164
-	bool "EB164"
-	help
-	  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
-	  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
-	  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
-	  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
-	  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
-	  motherboard.  Requires power supply with 3.3V output.
-
-config ALPHA_EB64P_CH
-	bool "EB64+"
-
-config ALPHA_EB66
-	bool "EB66"
-	help
-	  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
-	  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
-	  supply.  The EB66 schematic was published as a marketing poster
-	  advertising the 21066 as "the first microprocessor in the world with
-	  embedded PCI".
-
-config ALPHA_EB66P
-	bool "EB66+"
-	help
-	  Later variant of the EB66 board.
-
 config ALPHA_EIGER
 	bool "Eiger"
 	help
 	  Apparently an obscure OEM single-board computer based on the
 	  Typhoon/Tsunami chipset family. Information on it is scanty.
 
-config ALPHA_JENSEN
-	bool "Jensen"
-	depends on BROKEN
-	select HAVE_EISA
-	help
-	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
-	  of the first-generation Alpha systems. A number of these systems
-	  seem to be available on the second- hand market. The Jensen is a
-	  floor-standing tower system which originally used a 150MHz 21064 It
-	  used programmable logic to interface a 486 EISA I/O bridge to the
-	  CPU.
-
 config ALPHA_LX164
 	bool "LX164"
 	help
 	  A technical overview of this board is available at
 	  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
 
-config ALPHA_LYNX
-	bool "Lynx"
-	select HAVE_EISA
-	help
-	  AlphaServer 2100A-based systems.
-
 config ALPHA_MARVEL
 	bool "Marvel"
 	help
@@ -247,9 +168,6 @@ config ALPHA_NAUTILUS
 	help
 	  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
 
-config ALPHA_NONAME_CH
-	bool "Noname"
-
 config ALPHA_NORITAKE
 	bool "Noritake"
 	select HAVE_EISA
@@ -260,9 +178,6 @@ config ALPHA_NORITAKE
 config ALPHA_PC164
 	bool "PC164"
 
-config ALPHA_P2K
-	bool "Platform2000"
-
 config ALPHA_RAWHIDE
 	bool "Rawhide"
 	select HAVE_EISA
@@ -326,91 +241,18 @@ config ISA_DMA_API
 	bool
 	default y
 
-config ALPHA_NONAME
-	bool
-	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
-	default y
-	help
-	  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
-	  UDB).  This design was produced by Digital's Technical OEM (TOEM)
-	  group. It uses the 21066 processor running at 166MHz or 233MHz. It
-	  is a baby-AT size, and runs from a standard PC power supply. It has
-	  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
-	  2 versions, with either PS/2 or large DIN connectors for the
-	  keyboard.
-
-config ALPHA_EV4
-	bool
-	depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y if !ALPHA_LYNX
-
-config ALPHA_LCA
-	bool
-	depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
-	default y
-
-config ALPHA_APECS
-	bool
-	depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
-	default y
-
-config ALPHA_EB64P
-	bool
-	depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
-	default y
-	help
-	  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
-	  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
-	  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
-	  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
-	  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
-	  Runs from standard PC power supply.
-
-config ALPHA_EV5
-	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
-	default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
-
-config ALPHA_EV4
-	bool
-	default y if ALPHA_LYNX && !ALPHA_EV5
-
 config ALPHA_CIA
 	bool
-	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
+	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR
 	default y
 
 config ALPHA_EV56
-	bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
-	default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 333MHz)?"
-	depends on ALPHA_NORITAKE || ALPHA_PRIMO
-
-config ALPHA_EV56
-	prompt "EV56 CPU (speed >= 400MHz)?"
-	depends on ALPHA_RAWHIDE
-
-config ALPHA_PRIMO
-	bool "EV5 CPU daughtercard (model 5/xxx)?"
-	depends on ALPHA_NORITAKE || ALPHA_MIKASA
-	help
-	  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
-
-config ALPHA_GAMMA
-	bool "EV5 CPU(s) (model 5/xxx)?"
-	depends on ALPHA_SABLE
-	help
-	  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
-
-config ALPHA_GAMMA
 	bool
-	depends on ALPHA_LYNX
-	default y
+	default y if ALPHA_ALCOR || ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_NORITAKE || ALPHA_MIKASA || ALPHA_RAWHIDE || ALPHA_SABLE
 
 config ALPHA_T2
 	bool
-	depends on ALPHA_SABLE || ALPHA_LYNX
+	depends on ALPHA_SABLE
 	default y
 
 config ALPHA_PYXIS
@@ -454,15 +296,6 @@ config GENERIC_HWEIGHT
 	bool
 	default y if !ALPHA_EV67
 
-config ALPHA_AVANTI
-	bool
-	depends on ALPHA_XL || ALPHA_AVANTI_CH
-	default y
-	help
-	  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
-	  Alphas. Info at
-	  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
-
 config ALPHA_BROKEN_IRQ_MASK
 	bool
 	depends on ALPHA_GENERIC || ALPHA_PC164
@@ -480,7 +313,7 @@ config VGA_HOSE
 config ALPHA_QEMU
 	bool "Run under QEMU emulation"
 	depends on !ALPHA_GENERIC
-	---help---
+	help
 	  Assume the presence of special features supported by QEMU PALcode
 	  that reduce the overhead of system emulation.
 
@@ -492,10 +325,10 @@ config ALPHA_QEMU
 
 
 config ALPHA_SRM
-	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
+	bool "Use SRM as bootloader" if ALPHA_PC164 || ALPHA_TAKARA || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS
 	depends on TTY
-	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
-	---help---
+	default y if ALPHA_MIKASA || ALPHA_SABLE || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
+	help
 	  There are two different types of booting firmware on Alphas: SRM,
 	  which is command line driven, and ARC, which uses menus and arrow
 	  keys. Details about the Linux/Alpha booting process are contained in
@@ -520,8 +353,8 @@ config ARCH_MAY_HAVE_PC_FDC
 
 config SMP
 	bool "Symmetric multi-processing support"
-	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
-	---help---
+	depends on ALPHA_SABLE || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
+	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
 	  than one CPU, say Y.
@@ -533,7 +366,7 @@ config SMP
 	  will run faster if you say N here.
 
 	  See also the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
+	  <https://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 
@@ -545,31 +378,21 @@ config NR_CPUS
 	default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
 	help
 	  MARVEL support can handle a maximum of 32 CPUs, all the others
-          with working support have a maximum of 4 CPUs.
+	  with working support have a maximum of 4 CPUs.
 
-config ARCH_DISCONTIGMEM_ENABLE
-	bool "Discontiguous Memory Support"
+config ARCH_SPARSEMEM_ENABLE
+	bool "Sparse Memory Support"
 	help
 	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa.rst> for more.
-
-config NUMA
-	bool "NUMA Support (EXPERIMENTAL)"
-	depends on DISCONTIGMEM && BROKEN
-	help
-	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-	  Access).  This option is for configuring high-end multiprocessor
-	  server machines.  If in doubt, say N.
+	  for systems that have huge holes in the physical address space.
 
 config ALPHA_WTINT
 	bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
 	default y if ALPHA_QEMU
-	default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
+	default n if ALPHA_EV56
 	default n if !ALPHA_SRM && !ALPHA_GENERIC
 	default y if SMP
-	---help---
+	help
 	  The Wait for Interrupt (WTINT) PALcall attempts to place the CPU
 	  to sleep until the next interrupt.  This may reduce the power
 	  consumed, and the heat produced by the computer.  However, it has
@@ -587,15 +410,10 @@ config ALPHA_WTINT
 
 	  If unsure, say N.
 
-config NODES_SHIFT
-	int
-	default "7"
-	depends on NEED_MULTIPLE_NODES
-
 # LARGE_VMALLOC is racy, if you *really* need it then fix it first
 config ALPHA_LARGE_VMALLOC
 	bool
-	---help---
+	help
 	  Process creation and other aspects of virtual memory management can
 	  be streamlined if we restrict the kernel to one PGD for all vmalloc
 	  allocations.  This equates to about 8GB.
@@ -614,7 +432,7 @@ config VERBOSE_MCHECK_ON
 	int "Verbose Printing Mode (0=off, 1=on, 2=all)"
 	depends on VERBOSE_MCHECK
 	default 1
-	---help---
+	help
 	  This option allows the default printing mode to be set, and then
 	  possibly overridden by a boot command argument.
 
@@ -633,7 +451,7 @@ choice
 	default HZ_128 if ALPHA_QEMU
 	default HZ_1200 if ALPHA_RAWHIDE
 	default HZ_1024
-	---help---
+	help
 	  The frequency at which timer interrupts occur.  A high frequency
 	  minimizes latency, whereas a low frequency minimizes overhead of
 	  process accounting.  The later effect is especially significant
@@ -657,7 +475,7 @@ choice
 endchoice
 
 config HZ
-	int 
+	int
 	default 32 if HZ_32
 	default 64 if HZ_64
 	default 128 if HZ_128
@@ -668,7 +486,7 @@ config HZ
 config SRM_ENV
 	tristate "SRM environment through procfs"
 	depends on PROC_FS
-	---help---
+	help
 	  If you enable this option, a subdirectory inside /proc called
 	  /proc/srm_environment will give you access to the all important
 	  SRM environment variables (those which have a name) and also
diff --git a/arch/alpha/Kconfig.debug b/arch/alpha/Kconfig.debug
index b88c7b641d72..f85f4281cc48 100644
--- a/arch/alpha/Kconfig.debug
+++ b/arch/alpha/Kconfig.debug
@@ -9,7 +9,7 @@ config ALPHA_LEGACY_START_ADDRESS
 	bool "Legacy kernel start address"
 	depends on ALPHA_GENERIC
 	default n
-	---help---
+	help
 	  The 2.4 kernel changed the kernel start address from 0x310000
 	  to 0x810000 to make room for the Wildfire's larger SRM console.
 	  Recent consoles on Titan and Marvel machines also require the
diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile
index 12dee59b011c..35445ff2e489 100644
--- a/arch/alpha/Makefile
+++ b/arch/alpha/Makefile
@@ -15,18 +15,14 @@ CHECKFLAGS	+= -D__alpha__
 cflags-y	:= -pipe -mno-fp-regs -ffixed-8
 cflags-y	+= $(call cc-option, -fno-jump-tables)
 
-cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4
-cpuflags-$(CONFIG_ALPHA_EV5)		:= -mcpu=ev5
 cpuflags-$(CONFIG_ALPHA_EV56)		:= -mcpu=ev56
 cpuflags-$(CONFIG_ALPHA_POLARIS)	:= -mcpu=pca56
 cpuflags-$(CONFIG_ALPHA_SX164)		:= -mcpu=pca56
 cpuflags-$(CONFIG_ALPHA_EV6)		:= -mcpu=ev6
 cpuflags-$(CONFIG_ALPHA_EV67)		:= -mcpu=ev67
 # If GENERIC, make sure to turn off any instruction set extensions that
-# the host compiler might have on by default.  Given that EV4 and EV5
-# have the same instruction set, prefer EV5 because an EV5 schedule is
-# more likely to keep an EV4 processor busy than vice-versa.
-cpuflags-$(CONFIG_ALPHA_GENERIC)	:= -mcpu=ev5
+# the host compiler might have on by default.
+cpuflags-$(CONFIG_ALPHA_GENERIC)	:= -mcpu=ev56 -mtune=ev6
 
 cflags-y				+= $(cpuflags-y)
 
@@ -36,11 +32,6 @@ cflags-y				+= $(cpuflags-y)
 # BWX is most important, but we don't really want any emulation ever.
 KBUILD_CFLAGS += $(cflags-y) -Wa,-mev6
 
-head-y := arch/alpha/kernel/head.o
-
-core-y				+= arch/alpha/kernel/ arch/alpha/mm/
-core-$(CONFIG_MATHEMU)		+= arch/alpha/math-emu/
-drivers-$(CONFIG_OPROFILE)	+= arch/alpha/oprofile/
 libs-y				+= arch/alpha/lib/
 
 # export what is needed by arch/alpha/boot/Makefile
@@ -58,9 +49,6 @@ $(boot)/vmlinux.gz: vmlinux
 bootimage bootpfile bootpzfile: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
-
 archheaders:
 	$(Q)$(MAKE) $(build)=arch/alpha/kernel/syscalls all
 
diff --git a/arch/alpha/boot/Makefile b/arch/alpha/boot/Makefile
index 991e023a6fc4..d8dba85e606c 100644
--- a/arch/alpha/boot/Makefile
+++ b/arch/alpha/boot/Makefile
@@ -8,7 +8,7 @@
 # Copyright (C) 1994 by Linus Torvalds
 #
 
-hostprogs-y	:= tools/mkbb tools/objstrip
+hostprogs	:= tools/mkbb tools/objstrip
 targets		:= vmlinux.gz vmlinux \
 		   vmlinux.nh tools/lxboot tools/bootlx tools/bootph \
 		   tools/bootpzh bootloader bootpheader bootpzheader 
diff --git a/arch/alpha/boot/bootp.c b/arch/alpha/boot/bootp.c
index 95c0359f4858..842e85776cc0 100644
--- a/arch/alpha/boot/bootp.c
+++ b/arch/alpha/boot/bootp.c
@@ -16,15 +16,14 @@
 
 #include <asm/console.h>
 #include <asm/hwrpb.h>
-#include <asm/pgtable.h>
 #include <asm/io.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "ksize.h"
 
 extern unsigned long switch_to_osf_pal(unsigned long nr,
-	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
+	struct pcb_struct *pcb_va, struct pcb_struct *pcb_pa,
 	unsigned long *vptb);
 
 extern void move_stack(unsigned long new_stack);
diff --git a/arch/alpha/boot/bootpz.c b/arch/alpha/boot/bootpz.c
index 99b8d7dc344b..c6079308eab3 100644
--- a/arch/alpha/boot/bootpz.c
+++ b/arch/alpha/boot/bootpz.c
@@ -18,10 +18,9 @@
 
 #include <asm/console.h>
 #include <asm/hwrpb.h>
-#include <asm/pgtable.h>
 #include <asm/io.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "kzsize.h"
 
@@ -201,7 +200,7 @@ extern char _end;
 	START_ADDR	KSEG address of the entry point of kernel code.
 
 	ZERO_PGE	KSEG address of page full of zeroes, but 
-			upon entry to kerne cvan be expected
+			upon entry to kernel, it can be expected
 			to hold the parameter list and possible
 			INTRD information.
 
diff --git a/arch/alpha/boot/main.c b/arch/alpha/boot/main.c
index 8f5ed8610970..22a1cb0264af 100644
--- a/arch/alpha/boot/main.c
+++ b/arch/alpha/boot/main.c
@@ -14,9 +14,8 @@
 
 #include <asm/console.h>
 #include <asm/hwrpb.h>
-#include <asm/pgtable.h>
 
-#include <stdarg.h>
+#include <linux/stdarg.h>
 
 #include "ksize.h"
 
diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index d65192202703..1ab91852d9f7 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -30,7 +30,7 @@ extern long srm_printk(const char *, ...)
      __attribute__ ((format (printf, 1, 2)));
 
 /*
- * gzip delarations
+ * gzip declarations
  */
 #define OF(args)  args
 #define STATIC static
@@ -89,8 +89,6 @@ static ulg output_ptr;
 static ulg bytes_out;
 
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern int end;
 static ulg free_mem_ptr;
diff --git a/arch/alpha/boot/stdio.c b/arch/alpha/boot/stdio.c
index 60f73ccd2e89..faa5234b90b8 100644
--- a/arch/alpha/boot/stdio.c
+++ b/arch/alpha/boot/stdio.c
@@ -2,8 +2,8 @@
 /*
  * Copyright (C) Paul Mackerras 1997.
  */
-#include <stdarg.h>
-#include <stddef.h>
+#include <linux/string.h>
+#include <linux/stdarg.h>
 
 size_t strnlen(const char * s, size_t count)
 {
@@ -42,8 +42,8 @@ static int skip_atoi(const char **s)
 
 static char * number(char * str, unsigned long long num, int base, int size, int precision, int type)
 {
-	char c,sign,tmp[66];
-	const char *digits="0123456789abcdefghijklmnopqrstuvwxyz";
+	char c, sign, tmp[66];
+	const char *digits = "0123456789abcdefghijklmnopqrstuvwxyz";
 	int i;
 
 	if (type & LARGE)
@@ -83,14 +83,14 @@ static char * number(char * str, unsigned long long num, int base, int size, int
 		precision = i;
 	size -= precision;
 	if (!(type&(ZEROPAD+LEFT)))
-		while(size-->0)
+		while (size-- > 0)
 			*str++ = ' ';
 	if (sign)
 		*str++ = sign;
 	if (type & SPECIAL) {
 		if (base==8)
 			*str++ = '0';
-		else if (base==16) {
+		else if (base == 16) {
 			*str++ = '0';
 			*str++ = digits[33];
 		}
@@ -125,7 +125,7 @@ int vsprintf(char *buf, const char *fmt, va_list args)
 				/* 'z' changed to 'Z' --davidm 1/25/99 */
 
 
-	for (str=buf ; *fmt ; ++fmt) {
+	for (str = buf ; *fmt ; ++fmt) {
 		if (*fmt != '%') {
 			*str++ = *fmt;
 			continue;
@@ -296,7 +296,7 @@ int sprintf(char * buf, const char *fmt, ...)
 	int i;
 
 	va_start(args, fmt);
-	i=vsprintf(buf,fmt,args);
+	i = vsprintf(buf, fmt, args);
 	va_end(args);
 	return i;
 }
diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c
index 825a16f5f622..7cf92d172dce 100644
--- a/arch/alpha/boot/tools/objstrip.c
+++ b/arch/alpha/boot/tools/objstrip.c
@@ -148,7 +148,7 @@ main (int argc, char *argv[])
 #ifdef __ELF__
     elf = (struct elfhdr *) buf;
 
-    if (elf->e_ident[0] == 0x7f && strncmp((char *)elf->e_ident + 1, "ELF", 3) == 0) {
+    if (memcmp(&elf->e_ident[EI_MAG0], ELFMAG, SELFMAG) == 0) {
 	if (elf->e_type != ET_EXEC) {
 	    fprintf(stderr, "%s: %s is not an ELF executable\n",
 		    prog_name, inname);
diff --git a/arch/alpha/configs/defconfig b/arch/alpha/configs/defconfig
index f4ec420d7f2d..3280bd9e6578 100644
--- a/arch/alpha/configs/defconfig
+++ b/arch/alpha/configs/defconfig
@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -26,36 +25,32 @@ CONFIG_PNP=y
 CONFIG_ISAPNP=y
 CONFIG_BLK_DEV_FD=y
 CONFIG_BLK_DEV_LOOP=m
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_ALI15X3=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_CY82C693=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_PATA_ALI=y
+CONFIG_PATA_CMD64X=y
+CONFIG_PATA_CYPRESS=y
+CONFIG_ATA_GENERIC=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_NET_ETHERNET=y
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
 CONFIG_TULIP=y
 CONFIG_TULIP_MMIO=y
-CONFIG_NET_PCI=y
 CONFIG_YELLOWFIN=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_RTC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
 CONFIG_EXT2_FS=y
-CONFIG_REISERFS_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
@@ -64,11 +59,11 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_ALPHA_LEGACY_START_ADDRESS=y
 CONFIG_MATHEMU=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_DEVTMPFS=y
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index 89e87bbc987f..483965c5a4de 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -1,17 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
 generated-y += syscall_table.h
-generic-y += compat.h
-generic-y += exec.h
-generic-y += export.h
-generic-y += fb.h
-generic-y += irq_work.h
+generic-y += agp.h
+generic-y += asm-offsets.h
 generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
-generic-y += mm-arch-hooks.h
-generic-y += mmiowb.h
-generic-y += preempt.h
-generic-y += sections.h
-generic-y += trace_clock.h
-generic-y += current.h
-generic-y += kprobes.h
+generic-y += text-patching.h
diff --git a/arch/alpha/include/asm/a.out.h b/arch/alpha/include/asm/a.out.h
deleted file mode 100644
index d2346b7caff1..000000000000
--- a/arch/alpha/include/asm/a.out.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_A_OUT_H__
-#define __ALPHA_A_OUT_H__
-
-#include <uapi/asm/a.out.h>
-
-
-/* Assume that start addresses below 4G belong to a TASO application.
-   Unfortunately, there is no proper bit in the exec header to check.
-   Worse, we have to notice the start address before swapping to use
-   /sbin/loader, which of course is _not_ a TASO application.  */
-#define SET_AOUT_PERSONALITY(BFPM, EX) \
-	set_personality (((BFPM->taso || EX.ah.entry < 0x100000000L \
-			   ? ADDR_LIMIT_32BIT : 0) | PER_OSF4))
-
-#endif /* __A_OUT_GNU_H__ */
diff --git a/arch/alpha/include/asm/agp.h b/arch/alpha/include/asm/agp.h
deleted file mode 100644
index 7173eada1567..000000000000
--- a/arch/alpha/include/asm/agp.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef AGP_H
-#define AGP_H 1
-
-#include <asm/io.h>
-
-/* dummy for now */
-
-#define map_page_into_agp(page) 
-#define unmap_page_from_agp(page) 
-#define flush_agp_cache() mb()
-
-/* GATT allocation. Returns/accepts GATT kernel virtual address. */
-#define alloc_gatt_pages(order)		\
-	((char *)__get_free_pages(GFP_KERNEL, (order)))
-#define free_gatt_pages(table, order)	\
-	free_pages((unsigned long)(table), (order))
-
-#endif
diff --git a/arch/alpha/include/asm/asm-offsets.h b/arch/alpha/include/asm/asm-offsets.h
deleted file mode 100644
index d370ee36a182..000000000000
--- a/arch/alpha/include/asm/asm-offsets.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <generated/asm-offsets.h>
diff --git a/arch/alpha/include/asm/asm-prototypes.h b/arch/alpha/include/asm/asm-prototypes.h
index b34cc1f06720..c8ae46fc2e74 100644
--- a/arch/alpha/include/asm/asm-prototypes.h
+++ b/arch/alpha/include/asm/asm-prototypes.h
@@ -16,3 +16,4 @@ extern void __divlu(void);
 extern void __remlu(void);
 extern void __divqu(void);
 extern void __remqu(void);
+extern unsigned long __udiv_qrnnd(unsigned long *, unsigned long, unsigned long , unsigned long);
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index 2144530d1428..cbd9244571af 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -16,22 +16,21 @@
 
 /*
  * To ensure dependency ordering is preserved for the _relaxed and
- * _release atomics, an smp_read_barrier_depends() is unconditionally
- * inserted into the _relaxed variants, which are used to build the
- * barriered versions. Avoid redundant back-to-back fences in the
- * _acquire and _fence versions.
+ * _release atomics, an smp_mb() is unconditionally inserted into the
+ * _relaxed variants, which are used to build the barriered versions.
+ * Avoid redundant back-to-back fences in the _acquire and _fence
+ * versions.
  */
 #define __atomic_acquire_fence()
 #define __atomic_post_full_fence()
 
-#define ATOMIC_INIT(i)		{ (i) }
 #define ATOMIC64_INIT(i)	{ (i) }
 
-#define atomic_read(v)		READ_ONCE((v)->counter)
-#define atomic64_read(v)	READ_ONCE((v)->counter)
+#define arch_atomic_read(v)	READ_ONCE((v)->counter)
+#define arch_atomic64_read(v)	READ_ONCE((v)->counter)
 
-#define atomic_set(v,i)		WRITE_ONCE((v)->counter, (i))
-#define atomic64_set(v,i)	WRITE_ONCE((v)->counter, (i))
+#define arch_atomic_set(v,i)	WRITE_ONCE((v)->counter, (i))
+#define arch_atomic64_set(v,i)	WRITE_ONCE((v)->counter, (i))
 
 /*
  * To get proper branch prediction for the main line, we must branch
@@ -40,7 +39,7 @@
  */
 
 #define ATOMIC_OP(op, asm_op)						\
-static __inline__ void atomic_##op(int i, atomic_t * v)			\
+static __inline__ void arch_atomic_##op(int i, atomic_t * v)		\
 {									\
 	unsigned long temp;						\
 	__asm__ __volatile__(						\
@@ -56,7 +55,7 @@ static __inline__ void atomic_##op(int i, atomic_t * v)			\
 }									\
 
 #define ATOMIC_OP_RETURN(op, asm_op)					\
-static inline int atomic_##op##_return_relaxed(int i, atomic_t *v)	\
+static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 {									\
 	long temp, result;						\
 	__asm__ __volatile__(						\
@@ -70,12 +69,12 @@ static inline int atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 	".previous"							\
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)		\
 	:"Ir" (i), "m" (v->counter) : "memory");			\
-	smp_read_barrier_depends();					\
+	smp_mb();							\
 	return result;							\
 }
 
 #define ATOMIC_FETCH_OP(op, asm_op)					\
-static inline int atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
+static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 {									\
 	long temp, result;						\
 	__asm__ __volatile__(						\
@@ -88,12 +87,12 @@ static inline int atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 	".previous"							\
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)		\
 	:"Ir" (i), "m" (v->counter) : "memory");			\
-	smp_read_barrier_depends();					\
+	smp_mb();							\
 	return result;							\
 }
 
 #define ATOMIC64_OP(op, asm_op)						\
-static __inline__ void atomic64_##op(s64 i, atomic64_t * v)		\
+static __inline__ void arch_atomic64_##op(s64 i, atomic64_t * v)	\
 {									\
 	s64 temp;							\
 	__asm__ __volatile__(						\
@@ -109,7 +108,8 @@ static __inline__ void atomic64_##op(s64 i, atomic64_t * v)		\
 }									\
 
 #define ATOMIC64_OP_RETURN(op, asm_op)					\
-static __inline__ s64 atomic64_##op##_return_relaxed(s64 i, atomic64_t * v)	\
+static __inline__ s64							\
+arch_atomic64_##op##_return_relaxed(s64 i, atomic64_t * v)		\
 {									\
 	s64 temp, result;						\
 	__asm__ __volatile__(						\
@@ -123,12 +123,13 @@ static __inline__ s64 atomic64_##op##_return_relaxed(s64 i, atomic64_t * v)	\
 	".previous"							\
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)		\
 	:"Ir" (i), "m" (v->counter) : "memory");			\
-	smp_read_barrier_depends();					\
+	smp_mb();							\
 	return result;							\
 }
 
 #define ATOMIC64_FETCH_OP(op, asm_op)					\
-static __inline__ s64 atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v)	\
+static __inline__ s64							\
+arch_atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v)		\
 {									\
 	s64 temp, result;						\
 	__asm__ __volatile__(						\
@@ -141,7 +142,7 @@ static __inline__ s64 atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v)	\
 	".previous"							\
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)		\
 	:"Ir" (i), "m" (v->counter) : "memory");			\
-	smp_read_barrier_depends();					\
+	smp_mb();							\
 	return result;							\
 }
 
@@ -156,18 +157,18 @@ static __inline__ s64 atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v)	\
 ATOMIC_OPS(add)
 ATOMIC_OPS(sub)
 
-#define atomic_add_return_relaxed	atomic_add_return_relaxed
-#define atomic_sub_return_relaxed	atomic_sub_return_relaxed
-#define atomic_fetch_add_relaxed	atomic_fetch_add_relaxed
-#define atomic_fetch_sub_relaxed	atomic_fetch_sub_relaxed
+#define arch_atomic_add_return_relaxed		arch_atomic_add_return_relaxed
+#define arch_atomic_sub_return_relaxed		arch_atomic_sub_return_relaxed
+#define arch_atomic_fetch_add_relaxed		arch_atomic_fetch_add_relaxed
+#define arch_atomic_fetch_sub_relaxed		arch_atomic_fetch_sub_relaxed
 
-#define atomic64_add_return_relaxed	atomic64_add_return_relaxed
-#define atomic64_sub_return_relaxed	atomic64_sub_return_relaxed
-#define atomic64_fetch_add_relaxed	atomic64_fetch_add_relaxed
-#define atomic64_fetch_sub_relaxed	atomic64_fetch_sub_relaxed
+#define arch_atomic64_add_return_relaxed	arch_atomic64_add_return_relaxed
+#define arch_atomic64_sub_return_relaxed	arch_atomic64_sub_return_relaxed
+#define arch_atomic64_fetch_add_relaxed		arch_atomic64_fetch_add_relaxed
+#define arch_atomic64_fetch_sub_relaxed		arch_atomic64_fetch_sub_relaxed
 
-#define atomic_andnot atomic_andnot
-#define atomic64_andnot atomic64_andnot
+#define arch_atomic_andnot			arch_atomic_andnot
+#define arch_atomic64_andnot			arch_atomic64_andnot
 
 #undef ATOMIC_OPS
 #define ATOMIC_OPS(op, asm)						\
@@ -181,15 +182,15 @@ ATOMIC_OPS(andnot, bic)
 ATOMIC_OPS(or, bis)
 ATOMIC_OPS(xor, xor)
 
-#define atomic_fetch_and_relaxed	atomic_fetch_and_relaxed
-#define atomic_fetch_andnot_relaxed	atomic_fetch_andnot_relaxed
-#define atomic_fetch_or_relaxed		atomic_fetch_or_relaxed
-#define atomic_fetch_xor_relaxed	atomic_fetch_xor_relaxed
+#define arch_atomic_fetch_and_relaxed		arch_atomic_fetch_and_relaxed
+#define arch_atomic_fetch_andnot_relaxed	arch_atomic_fetch_andnot_relaxed
+#define arch_atomic_fetch_or_relaxed		arch_atomic_fetch_or_relaxed
+#define arch_atomic_fetch_xor_relaxed		arch_atomic_fetch_xor_relaxed
 
-#define atomic64_fetch_and_relaxed	atomic64_fetch_and_relaxed
-#define atomic64_fetch_andnot_relaxed	atomic64_fetch_andnot_relaxed
-#define atomic64_fetch_or_relaxed	atomic64_fetch_or_relaxed
-#define atomic64_fetch_xor_relaxed	atomic64_fetch_xor_relaxed
+#define arch_atomic64_fetch_and_relaxed		arch_atomic64_fetch_and_relaxed
+#define arch_atomic64_fetch_andnot_relaxed	arch_atomic64_fetch_andnot_relaxed
+#define arch_atomic64_fetch_or_relaxed		arch_atomic64_fetch_or_relaxed
+#define arch_atomic64_fetch_xor_relaxed		arch_atomic64_fetch_xor_relaxed
 
 #undef ATOMIC_OPS
 #undef ATOMIC64_FETCH_OP
@@ -199,22 +200,7 @@ ATOMIC_OPS(xor, xor)
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
-#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
-
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/**
- * atomic_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
-static __inline__ int atomic_fetch_add_unless(atomic_t *v, int a, int u)
+static __inline__ int arch_atomic_fetch_add_unless(atomic_t *v, int a, int u)
 {
 	int c, new, old;
 	smp_mb();
@@ -235,18 +221,9 @@ static __inline__ int atomic_fetch_add_unless(atomic_t *v, int a, int u)
 	smp_mb();
 	return old;
 }
-#define atomic_fetch_add_unless atomic_fetch_add_unless
+#define arch_atomic_fetch_add_unless arch_atomic_fetch_add_unless
 
-/**
- * atomic64_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
- */
-static __inline__ s64 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
+static __inline__ s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 {
 	s64 c, new, old;
 	smp_mb();
@@ -267,16 +244,9 @@ static __inline__ s64 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
 	smp_mb();
 	return old;
 }
-#define atomic64_fetch_add_unless atomic64_fetch_add_unless
+#define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
 
-/*
- * atomic64_dec_if_positive - decrement by 1 if old value positive
- * @v: pointer of type atomic_t
- *
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
-static inline s64 atomic64_dec_if_positive(atomic64_t *v)
+static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
 {
 	s64 old, tmp;
 	smp_mb();
@@ -296,6 +266,6 @@ static inline s64 atomic64_dec_if_positive(atomic64_t *v)
 	smp_mb();
 	return old - 1;
 }
-#define atomic64_dec_if_positive atomic64_dec_if_positive
+#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
 
 #endif /* _ALPHA_ATOMIC_H */
diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h
index 92ec486a4f9e..c56bfffc9918 100644
--- a/arch/alpha/include/asm/barrier.h
+++ b/arch/alpha/include/asm/barrier.h
@@ -2,64 +2,15 @@
 #ifndef __BARRIER_H
 #define __BARRIER_H
 
-#include <asm/compiler.h>
-
 #define mb()	__asm__ __volatile__("mb": : :"memory")
 #define rmb()	__asm__ __volatile__("mb": : :"memory")
 #define wmb()	__asm__ __volatile__("wmb": : :"memory")
 
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier.  All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies.  See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	b = 2;
- *	memory_barrier();
- *	p = &b;				q = p;
- *					read_barrier_depends();
- *					d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	a = 2;
- *	memory_barrier();
- *	b = 3;				y = b;
- *					read_barrier_depends();
- *					x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
- * in cases like this where there are no data dependencies.
- */
-#define read_barrier_depends() __asm__ __volatile__("mb": : :"memory")
+#define __smp_load_acquire(p)						\
+({									\
+	compiletime_assert_atomic_type(*p);				\
+	__READ_ONCE(*p);						\
+})
 
 #ifdef CONFIG_SMP
 #define __ASM_SMP_MB	"\tmb\n"
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 5adca78830b5..76e4343c090f 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -46,8 +46,8 @@ set_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static inline void
-__set_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -82,8 +82,8 @@ clear_bit_unlock(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ void
-__clear_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -94,7 +94,7 @@ static inline void
 __clear_bit_unlock(unsigned long nr, volatile void * addr)
 {
 	smp_mb();
-	__clear_bit(nr, addr);
+	arch___clear_bit(nr, addr);
 }
 
 static inline void
@@ -118,8 +118,8 @@ change_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ void
-__change_bit(unsigned long nr, volatile void * addr)
+static __always_inline void
+arch___change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	int *m = ((int *) addr) + (nr >> 5);
 
@@ -186,8 +186,8 @@ test_and_set_bit_lock(unsigned long nr, volatile void *addr)
 /*
  * WARNING: non atomic version.
  */
-static inline int
-__test_and_set_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -230,8 +230,8 @@ test_and_clear_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static inline int
-__test_and_clear_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -272,8 +272,8 @@ test_and_change_bit(unsigned long nr, volatile void * addr)
 /*
  * WARNING: non atomic version.
  */
-static __inline__ int
-__test_and_change_bit(unsigned long nr, volatile void * addr)
+static __always_inline bool
+arch___test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long mask = 1 << (nr & 0x1f);
 	int *m = ((int *) addr) + (nr >> 5);
@@ -283,10 +283,27 @@ __test_and_change_bit(unsigned long nr, volatile void * addr)
 	return (old & mask) != 0;
 }
 
-static inline int
-test_bit(int nr, const volatile void * addr)
+#define arch_test_bit generic_test_bit
+#define arch_test_bit_acquire generic_test_bit_acquire
+
+static inline bool xor_unlock_is_negative_byte(unsigned long mask,
+		volatile unsigned long *p)
 {
-	return (1UL & (((const int *) addr)[nr >> 5] >> (nr & 31))) != 0UL;
+	unsigned long temp, old;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	mov %0,%2\n"
+	"	xor %0,%3,%0\n"
+	"	stl_c %0,%1\n"
+	"	beq %0,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	:"=&r" (temp), "=m" (*p), "=&r" (old)
+	:"Ir" (mask), "m" (*p));
+
+	return (old & BIT(7)) != 0;
 }
 
 /*
@@ -311,7 +328,7 @@ static inline unsigned long ffz_b(unsigned long x)
 	return sum;
 }
 
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned long __attribute_const__ ffz(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -331,7 +348,7 @@ static inline unsigned long ffz(unsigned long word)
 /*
  * __ffs = Find First set bit in word.  Undefined if no set bit exists.
  */
-static inline unsigned long __ffs(unsigned long word)
+static inline __attribute_const__ unsigned long __ffs(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -356,7 +373,7 @@ static inline unsigned long __ffs(unsigned long word)
  * differs in spirit from the above __ffs.
  */
 
-static inline int ffs(int word)
+static inline __attribute_const__ int ffs(int word)
 {
 	int result = __ffs(word) + 1;
 	return word ? result : 0;
@@ -366,14 +383,14 @@ static inline int ffs(int word)
  * fls: find last bit set.
  */
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
-static inline int fls64(unsigned long word)
+static inline __attribute_const__ int fls64(unsigned long word)
 {
 	return 64 - __kernel_ctlz(word);
 }
 #else
 extern const unsigned char __flsm1_tab[256];
 
-static inline int fls64(unsigned long x)
+static inline __attribute_const__ int fls64(unsigned long x)
 {
 	unsigned long t, a, r;
 
@@ -386,12 +403,12 @@ static inline int fls64(unsigned long x)
 }
 #endif
 
-static inline unsigned long __fls(unsigned long x)
+static inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	return fls64(x) - 1;
 }
 
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	return fls64(x);
 }
@@ -430,8 +447,6 @@ static inline unsigned int __arch_hweight8(unsigned int w)
 
 #endif /* __KERNEL__ */
 
-#include <asm-generic/bitops/find.h>
-
 #ifdef __KERNEL__
 
 /*
@@ -452,6 +467,8 @@ sched_find_first_bit(const unsigned long b[2])
 	return __ffs(tmp) + ofs;
 }
 
+#include <asm-generic/bitops/non-instrumented-non-atomic.h>
+
 #include <asm-generic/bitops/le.h>
 
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
diff --git a/arch/alpha/include/asm/bugs.h b/arch/alpha/include/asm/bugs.h
deleted file mode 100644
index 78030d1c7e7e..000000000000
--- a/arch/alpha/include/asm/bugs.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- *  include/asm-alpha/bugs.h
- *
- *  Copyright (C) 1994  Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- *	void check_bugs(void);
- */
-
-/*
- * I don't know of any alpha bugs yet.. Nice chip
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/arch/alpha/include/asm/cacheflush.h b/arch/alpha/include/asm/cacheflush.h
index 89128489cb59..36a7e924c3b9 100644
--- a/arch/alpha/include/asm/cacheflush.h
+++ b/arch/alpha/include/asm/cacheflush.h
@@ -4,19 +4,6 @@
 
 #include <linux/mm.h>
 
-/* Caches aren't brain-dead on the Alpha. */
-#define flush_cache_all()			do { } while (0)
-#define flush_cache_mm(mm)			do { } while (0)
-#define flush_cache_dup_mm(mm)			do { } while (0)
-#define flush_cache_range(vma, start, end)	do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-#define flush_dcache_page(page)			do { } while (0)
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-#define flush_cache_vmap(start, end)		do { } while (0)
-#define flush_cache_vunmap(start, end)		do { } while (0)
-
 /* Note that the following two definitions are _highly_ dependent
    on the contexts in which they are used in the kernel.  I personally
    think it is criminal how loosely defined these macros are.  */
@@ -48,7 +35,7 @@ extern void smp_imb(void);
 
 extern void __load_new_mm_context(struct mm_struct *);
 static inline void
-flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+flush_icache_user_page(struct vm_area_struct *vma, struct page *page,
 			unsigned long addr, int len)
 {
 	if (vma->vm_flags & VM_EXEC) {
@@ -59,20 +46,24 @@ flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
 			mm->context[smp_processor_id()] = 0;
 	}
 }
-#else
-extern void flush_icache_user_range(struct vm_area_struct *vma,
+#define flush_icache_user_page flush_icache_user_page
+#else /* CONFIG_SMP */
+extern void flush_icache_user_page(struct vm_area_struct *vma,
 		struct page *page, unsigned long addr, int len);
-#endif
+#define flush_icache_user_page flush_icache_user_page
+#endif /* CONFIG_SMP */
 
-/* This is used only in __do_fault and do_swap_page.  */
-#define flush_icache_page(vma, page) \
-  flush_icache_user_range((vma), (page), 0, 0)
+/*
+ * Both implementations of flush_icache_user_page flush the entire
+ * address space, so one call, no matter how many pages.
+ */
+static inline void flush_icache_pages(struct vm_area_struct *vma,
+		struct page *page, unsigned int nr)
+{
+	flush_icache_user_page(vma, page, 0, 0);
+}
+#define flush_icache_pages flush_icache_pages
 
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { memcpy(dst, src, len); \
-     flush_icache_user_range(vma, page, vaddr, len); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
-	memcpy(dst, src, len)
+#include <asm-generic/cacheflush.h>
 
 #endif /* _ALPHA_CACHEFLUSH_H */
diff --git a/arch/alpha/include/asm/checksum.h b/arch/alpha/include/asm/checksum.h
index 473e6ccb65a3..99d631e146b2 100644
--- a/arch/alpha/include/asm/checksum.h
+++ b/arch/alpha/include/asm/checksum.h
@@ -41,9 +41,11 @@ extern __wsum csum_partial(const void *buff, int len, __wsum sum);
  * here even more important to align src and dst on a 32-bit (or even
  * better 64-bit) boundary
  */
-__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *errp);
+#define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
+#define _HAVE_ARCH_CSUM_AND_COPY
+__wsum csum_and_copy_from_user(const void __user *src, void *dst, int len);
 
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
+__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len);
 
 
 /*
diff --git a/arch/alpha/include/asm/cmpxchg.h b/arch/alpha/include/asm/cmpxchg.h
index 6c7c39452471..ae1b96479d0c 100644
--- a/arch/alpha/include/asm/cmpxchg.h
+++ b/arch/alpha/include/asm/cmpxchg.h
@@ -3,74 +3,281 @@
 #define _ALPHA_CMPXCHG_H
 
 /*
- * Atomic exchange routines.
+ * Atomic exchange.
+ * Since it can be used to implement critical sections
+ * it must clobber "memory" (also for interrupts in UP).
  */
 
-#define ____xchg(type, args...)		__xchg ## type ## _local(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ## type ## _local(args)
-#include <asm/xchg.h>
+static inline unsigned long
+____xchg_u8(volatile char *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	insbl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extbl	%2,%4,%0\n"
+	"	mskbl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+____xchg_u16(volatile short *m, unsigned long val)
+{
+	unsigned long ret, tmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%4,7,%3\n"
+	"	inswl	%1,%4,%1\n"
+	"1:	ldq_l	%2,0(%3)\n"
+	"	extwl	%2,%4,%0\n"
+	"	mskwl	%2,%4,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%3)\n"
+	"	beq	%2,2f\n"
+	".subsection 2\n"
+	"2:	br	1b\n"
+	".previous"
+	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
+	: "r" ((long)m), "1" (val) : "memory");
+
+	return ret;
+}
+
+static inline unsigned long
+____xchg_u32(volatile int *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+static inline unsigned long
+____xchg_u64(volatile long *m, unsigned long val)
+{
+	unsigned long dummy;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%4\n"
+	"	bis $31,%3,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,2f\n"
+	".subsection 2\n"
+	"2:	br 1b\n"
+	".previous"
+	: "=&r" (val), "=&r" (dummy), "=m" (*m)
+	: "rI" (val), "m" (*m) : "memory");
+
+	return val;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid xchg().  */
+extern void __xchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+____xchg(volatile void *ptr, unsigned long x, int size)
+{
+	return
+		size == 1 ? ____xchg_u8(ptr, x) :
+		size == 2 ? ____xchg_u16(ptr, x) :
+		size == 4 ? ____xchg_u32(ptr, x) :
+		size == 8 ? ____xchg_u64(ptr, x) :
+			(__xchg_called_with_bad_pointer(), x);
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+static inline unsigned long
+____cmpxchg_u8(volatile char *m, unsigned char old, unsigned char new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	insbl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extbl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskbl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u16(volatile short *m, unsigned short old, unsigned short new)
+{
+	unsigned long prev, tmp, cmp, addr64;
+
+	__asm__ __volatile__(
+	"	andnot	%5,7,%4\n"
+	"	inswl	%1,%5,%1\n"
+	"1:	ldq_l	%2,0(%4)\n"
+	"	extwl	%2,%5,%0\n"
+	"	cmpeq	%0,%6,%3\n"
+	"	beq	%3,2f\n"
+	"	mskwl	%2,%5,%2\n"
+	"	or	%1,%2,%2\n"
+	"	stq_c	%2,0(%4)\n"
+	"	beq	%2,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
+	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u32(volatile int *m, int old, int new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldl_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stl_c %1,%2\n"
+	"	beq %1,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+static inline unsigned long
+____cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+	unsigned long prev, cmp;
+
+	__asm__ __volatile__(
+	"1:	ldq_l %0,%5\n"
+	"	cmpeq %0,%3,%1\n"
+	"	beq %1,2f\n"
+	"	mov %4,%1\n"
+	"	stq_c %1,%2\n"
+	"	beq %1,3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br 1b\n"
+	".previous"
+	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
+	: "r"((long) old), "r"(new), "m"(*m) : "memory");
+
+	return prev;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+____cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
+	      int size)
+{
+	return
+		size == 1 ? ____cmpxchg_u8(ptr, old, new) :
+		size == 2 ? ____cmpxchg_u16(ptr, old, new) :
+		size == 4 ? ____cmpxchg_u32(ptr, old, new) :
+		size == 8 ? ____cmpxchg_u64(ptr, old, new) :
+			(__cmpxchg_called_with_bad_pointer(), old);
+}
 
 #define xchg_local(ptr, x)						\
 ({									\
 	__typeof__(*(ptr)) _x_ = (x);					\
-	(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_,	\
-				       sizeof(*(ptr)));			\
+	(__typeof__(*(ptr))) ____xchg((ptr), (unsigned long)_x_,	\
+					       sizeof(*(ptr)));		\
 })
 
-#define cmpxchg_local(ptr, o, n)					\
+#define arch_cmpxchg_local(ptr, o, n)					\
 ({									\
 	__typeof__(*(ptr)) _o_ = (o);					\
 	__typeof__(*(ptr)) _n_ = (n);					\
-	(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	\
+	(__typeof__(*(ptr))) ____cmpxchg((ptr), (unsigned long)_o_,	\
 					  (unsigned long)_n_,		\
 					  sizeof(*(ptr)));		\
 })
 
-#define cmpxchg64_local(ptr, o, n)					\
+#define arch_cmpxchg64_local(ptr, o, n)					\
 ({									\
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
 	cmpxchg_local((ptr), (o), (n));					\
 })
 
-#undef ____xchg
-#undef ____cmpxchg
-#define ____xchg(type, args...)		__xchg ##type(args)
-#define ____cmpxchg(type, args...)	__cmpxchg ##type(args)
-#include <asm/xchg.h>
-
 /*
  * The leading and the trailing memory barriers guarantee that these
  * operations are fully ordered.
  */
-#define xchg(ptr, x)							\
+#define arch_xchg(ptr, x)						\
 ({									\
 	__typeof__(*(ptr)) __ret;					\
 	__typeof__(*(ptr)) _x_ = (x);					\
 	smp_mb();							\
 	__ret = (__typeof__(*(ptr)))					\
-		__xchg((ptr), (unsigned long)_x_, sizeof(*(ptr)));	\
+		____xchg((ptr), (unsigned long)_x_, sizeof(*(ptr)));	\
 	smp_mb();							\
 	__ret;								\
 })
 
-#define cmpxchg(ptr, o, n)						\
+#define arch_cmpxchg(ptr, o, n)						\
 ({									\
 	__typeof__(*(ptr)) __ret;					\
 	__typeof__(*(ptr)) _o_ = (o);					\
 	__typeof__(*(ptr)) _n_ = (n);					\
 	smp_mb();							\
-	__ret = (__typeof__(*(ptr))) __cmpxchg((ptr),			\
+	__ret = (__typeof__(*(ptr))) ____cmpxchg((ptr),			\
 		(unsigned long)_o_, (unsigned long)_n_, sizeof(*(ptr)));\
 	smp_mb();							\
 	__ret;								\
 })
 
-#define cmpxchg64(ptr, o, n)						\
+#define arch_cmpxchg64(ptr, o, n)					\
 ({									\
 	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
-	cmpxchg((ptr), (o), (n));					\
+	arch_cmpxchg((ptr), (o), (n));					\
 })
 
-#undef ____cmpxchg
-
 #endif /* _ALPHA_CMPXCHG_H */
diff --git a/arch/alpha/include/asm/compiler.h b/arch/alpha/include/asm/compiler.h
index 5159ba259d65..ae645959018a 100644
--- a/arch/alpha/include/asm/compiler.h
+++ b/arch/alpha/include/asm/compiler.h
@@ -4,15 +4,4 @@
 
 #include <uapi/asm/compiler.h>
 
-/* Some idiots over in <linux/compiler.h> thought inline should imply
-   always_inline.  This breaks stuff.  We'll include this file whenever
-   we run into such problems.  */
-
-#include <linux/compiler.h>
-#undef inline
-#undef __inline__
-#undef __inline
-#undef __always_inline
-#define __always_inline		inline __attribute__((always_inline))
-
 #endif /* __ALPHA_COMPILER_H */
diff --git a/arch/alpha/include/asm/core_apecs.h b/arch/alpha/include/asm/core_apecs.h
deleted file mode 100644
index 0a07055bc0fe..000000000000
--- a/arch/alpha/include/asm/core_apecs.h
+++ /dev/null
@@ -1,518 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_APECS__H__
-#define __ALPHA_APECS__H__
-
-#include <linux/types.h>
-#include <asm/compiler.h>
-
-/*
- * APECS is the internal name for the 2107x chipset which provides
- * memory controller and PCI access for the 21064 chip based systems.
- *
- * This file is based on:
- *
- * DECchip 21071-AA and DECchip 21072-AA Core Logic Chipsets
- * Data Sheet
- *
- * EC-N0648-72
- *
- *
- * david.rusling@reo.mts.dec.com Initial Version.
- *
- */
-
-/*
-   An AVANTI *might* be an XL, and an XL has only 27 bits of ISA address
-   that get passed through the PCI<->ISA bridge chip. So we've gotta use
-   both windows to max out the physical memory we can DMA to. Sigh...
-
-   If we try a window at 0 for 1GB as a work-around, we run into conflicts
-   with ISA/PCI bus memory which can't be relocated, like VGA aperture and
-   BIOS ROMs. So we must put the windows high enough to avoid these areas.
-
-   We put window 1 at BUS 64Mb for 64Mb, mapping physical 0 to 64Mb-1,
-   and window 2 at BUS 1Gb for 1Gb, mapping physical 0 to 1Gb-1.
-   Yes, this does map 0 to 64Mb-1 twice, but only window 1 will actually
-   be used for that range (via virt_to_bus()).
-
-   Note that we actually fudge the window 1 maximum as 48Mb instead of 64Mb,
-   to keep virt_to_bus() from returning an address in the first window, for
-   a data area that goes beyond the 64Mb first DMA window.  Sigh...
-   The fudge factor MUST match with <asm/dma.h> MAX_DMA_ADDRESS, but
-   we can't just use that here, because of header file looping... :-(
-
-   Window 1 will be used for all DMA from the ISA bus; yes, that does
-   limit what memory an ISA floppy or sound card or Ethernet can touch, but
-   it's also a known limitation on other platforms as well. We use the
-   same technique that is used on INTEL platforms with similar limitation:
-   set MAX_DMA_ADDRESS and clear some pages' DMAable flags during mem_init().
-   We trust that any ISA bus device drivers will *always* ask for DMAable
-   memory explicitly via kmalloc()/get_free_pages() flags arguments.
-
-   Note that most PCI bus devices' drivers do *not* explicitly ask for
-   DMAable memory; they count on being able to DMA to any memory they
-   get from kmalloc()/get_free_pages(). They will also use window 1 for
-   any physical memory accesses below 64Mb; the rest will be handled by
-   window 2, maxing out at 1Gb of memory. I trust this is enough... :-)
-
-   We hope that the area before the first window is large enough so that
-   there will be no overlap at the top end (64Mb). We *must* locate the
-   PCI cards' memory just below window 1, so that there's still the
-   possibility of being able to access it via SPARSE space. This is
-   important for cards such as the Matrox Millennium, whose Xserver
-   wants to access memory-mapped registers in byte and short lengths.
-
-   Note that the XL is treated differently from the AVANTI, even though
-   for most other things they are identical. It didn't seem reasonable to
-   make the AVANTI support pay for the limitations of the XL. It is true,
-   however, that an XL kernel will run on an AVANTI without problems.
-
-   %%% All of this should be obviated by the ability to route
-   everything through the iommu.
-*/
-
-/*
- * 21071-DA Control and Status registers.
- * These are used for PCI memory access.
- */
-#define APECS_IOC_DCSR                  (IDENT_ADDR + 0x1A0000000UL)
-#define APECS_IOC_PEAR                  (IDENT_ADDR + 0x1A0000020UL)
-#define APECS_IOC_SEAR                  (IDENT_ADDR + 0x1A0000040UL)
-#define APECS_IOC_DR1                   (IDENT_ADDR + 0x1A0000060UL)
-#define APECS_IOC_DR2                   (IDENT_ADDR + 0x1A0000080UL)
-#define APECS_IOC_DR3                   (IDENT_ADDR + 0x1A00000A0UL)
-
-#define APECS_IOC_TB1R                  (IDENT_ADDR + 0x1A00000C0UL)
-#define APECS_IOC_TB2R                  (IDENT_ADDR + 0x1A00000E0UL)
-
-#define APECS_IOC_PB1R                  (IDENT_ADDR + 0x1A0000100UL)
-#define APECS_IOC_PB2R                  (IDENT_ADDR + 0x1A0000120UL)
-
-#define APECS_IOC_PM1R                  (IDENT_ADDR + 0x1A0000140UL)
-#define APECS_IOC_PM2R                  (IDENT_ADDR + 0x1A0000160UL)
-
-#define APECS_IOC_HAXR0                 (IDENT_ADDR + 0x1A0000180UL)
-#define APECS_IOC_HAXR1                 (IDENT_ADDR + 0x1A00001A0UL)
-#define APECS_IOC_HAXR2                 (IDENT_ADDR + 0x1A00001C0UL)
-
-#define APECS_IOC_PMLT                  (IDENT_ADDR + 0x1A00001E0UL)
-
-#define APECS_IOC_TLBTAG0               (IDENT_ADDR + 0x1A0000200UL)
-#define APECS_IOC_TLBTAG1               (IDENT_ADDR + 0x1A0000220UL)
-#define APECS_IOC_TLBTAG2               (IDENT_ADDR + 0x1A0000240UL)
-#define APECS_IOC_TLBTAG3               (IDENT_ADDR + 0x1A0000260UL)
-#define APECS_IOC_TLBTAG4               (IDENT_ADDR + 0x1A0000280UL)
-#define APECS_IOC_TLBTAG5               (IDENT_ADDR + 0x1A00002A0UL)
-#define APECS_IOC_TLBTAG6               (IDENT_ADDR + 0x1A00002C0UL)
-#define APECS_IOC_TLBTAG7               (IDENT_ADDR + 0x1A00002E0UL)
-
-#define APECS_IOC_TLBDATA0              (IDENT_ADDR + 0x1A0000300UL)
-#define APECS_IOC_TLBDATA1              (IDENT_ADDR + 0x1A0000320UL)
-#define APECS_IOC_TLBDATA2              (IDENT_ADDR + 0x1A0000340UL)
-#define APECS_IOC_TLBDATA3              (IDENT_ADDR + 0x1A0000360UL)
-#define APECS_IOC_TLBDATA4              (IDENT_ADDR + 0x1A0000380UL)
-#define APECS_IOC_TLBDATA5              (IDENT_ADDR + 0x1A00003A0UL)
-#define APECS_IOC_TLBDATA6              (IDENT_ADDR + 0x1A00003C0UL)
-#define APECS_IOC_TLBDATA7              (IDENT_ADDR + 0x1A00003E0UL)
-
-#define APECS_IOC_TBIA                  (IDENT_ADDR + 0x1A0000400UL)
-
-
-/*
- * 21071-CA Control and Status registers.
- * These are used to program memory timing,
- *  configure memory and initialise the B-Cache.
- */
-#define APECS_MEM_GCR		        (IDENT_ADDR + 0x180000000UL)
-#define APECS_MEM_EDSR		        (IDENT_ADDR + 0x180000040UL)
-#define APECS_MEM_TAR  		        (IDENT_ADDR + 0x180000060UL)
-#define APECS_MEM_ELAR		        (IDENT_ADDR + 0x180000080UL)
-#define APECS_MEM_EHAR  		(IDENT_ADDR + 0x1800000a0UL)
-#define APECS_MEM_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define APECS_MEM_LDxLAR 		(IDENT_ADDR + 0x1800000e0UL)
-#define APECS_MEM_LDxHAR 		(IDENT_ADDR + 0x180000100UL)
-#define APECS_MEM_GTR    		(IDENT_ADDR + 0x180000200UL)
-#define APECS_MEM_RTR    		(IDENT_ADDR + 0x180000220UL)
-#define APECS_MEM_VFPR   		(IDENT_ADDR + 0x180000240UL)
-#define APECS_MEM_PDLDR  		(IDENT_ADDR + 0x180000260UL)
-#define APECS_MEM_PDhDR  		(IDENT_ADDR + 0x180000280UL)
-
-/* Bank x Base Address Register */
-#define APECS_MEM_B0BAR  		(IDENT_ADDR + 0x180000800UL)
-#define APECS_MEM_B1BAR  		(IDENT_ADDR + 0x180000820UL)
-#define APECS_MEM_B2BAR  		(IDENT_ADDR + 0x180000840UL)
-#define APECS_MEM_B3BAR  		(IDENT_ADDR + 0x180000860UL)
-#define APECS_MEM_B4BAR  		(IDENT_ADDR + 0x180000880UL)
-#define APECS_MEM_B5BAR  		(IDENT_ADDR + 0x1800008A0UL)
-#define APECS_MEM_B6BAR  		(IDENT_ADDR + 0x1800008C0UL)
-#define APECS_MEM_B7BAR  		(IDENT_ADDR + 0x1800008E0UL)
-#define APECS_MEM_B8BAR  		(IDENT_ADDR + 0x180000900UL)
-
-/* Bank x Configuration Register */
-#define APECS_MEM_B0BCR  		(IDENT_ADDR + 0x180000A00UL)
-#define APECS_MEM_B1BCR  		(IDENT_ADDR + 0x180000A20UL)
-#define APECS_MEM_B2BCR  		(IDENT_ADDR + 0x180000A40UL)
-#define APECS_MEM_B3BCR  		(IDENT_ADDR + 0x180000A60UL)
-#define APECS_MEM_B4BCR  		(IDENT_ADDR + 0x180000A80UL)
-#define APECS_MEM_B5BCR  		(IDENT_ADDR + 0x180000AA0UL)
-#define APECS_MEM_B6BCR  		(IDENT_ADDR + 0x180000AC0UL)
-#define APECS_MEM_B7BCR  		(IDENT_ADDR + 0x180000AE0UL)
-#define APECS_MEM_B8BCR  		(IDENT_ADDR + 0x180000B00UL)
-
-/* Bank x Timing Register A */
-#define APECS_MEM_B0TRA  		(IDENT_ADDR + 0x180000C00UL)
-#define APECS_MEM_B1TRA  		(IDENT_ADDR + 0x180000C20UL)
-#define APECS_MEM_B2TRA  		(IDENT_ADDR + 0x180000C40UL)
-#define APECS_MEM_B3TRA  		(IDENT_ADDR + 0x180000C60UL)
-#define APECS_MEM_B4TRA  		(IDENT_ADDR + 0x180000C80UL)
-#define APECS_MEM_B5TRA  		(IDENT_ADDR + 0x180000CA0UL)
-#define APECS_MEM_B6TRA  		(IDENT_ADDR + 0x180000CC0UL)
-#define APECS_MEM_B7TRA  		(IDENT_ADDR + 0x180000CE0UL)
-#define APECS_MEM_B8TRA  		(IDENT_ADDR + 0x180000D00UL)
-
-/* Bank x Timing Register B */
-#define APECS_MEM_B0TRB                 (IDENT_ADDR + 0x180000E00UL)
-#define APECS_MEM_B1TRB  		(IDENT_ADDR + 0x180000E20UL)
-#define APECS_MEM_B2TRB  		(IDENT_ADDR + 0x180000E40UL)
-#define APECS_MEM_B3TRB  		(IDENT_ADDR + 0x180000E60UL)
-#define APECS_MEM_B4TRB  		(IDENT_ADDR + 0x180000E80UL)
-#define APECS_MEM_B5TRB  		(IDENT_ADDR + 0x180000EA0UL)
-#define APECS_MEM_B6TRB  		(IDENT_ADDR + 0x180000EC0UL)
-#define APECS_MEM_B7TRB  		(IDENT_ADDR + 0x180000EE0UL)
-#define APECS_MEM_B8TRB  		(IDENT_ADDR + 0x180000F00UL)
-
-
-/*
- * Memory spaces:
- */
-#define APECS_IACK_SC		        (IDENT_ADDR + 0x1b0000000UL)
-#define APECS_CONF		        (IDENT_ADDR + 0x1e0000000UL)
-#define APECS_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define APECS_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define APECS_DENSE_MEM		        (IDENT_ADDR + 0x300000000UL)
-
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define APECS_IOC_STAT0_CMD		0xf
-#define APECS_IOC_STAT0_ERR		(1<<4)
-#define APECS_IOC_STAT0_LOST		(1<<5)
-#define APECS_IOC_STAT0_THIT		(1<<6)
-#define APECS_IOC_STAT0_TREF		(1<<7)
-#define APECS_IOC_STAT0_CODE_SHIFT	8
-#define APECS_IOC_STAT0_CODE_MASK	0x7
-#define APECS_IOC_STAT0_P_NBR_SHIFT	13
-#define APECS_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define APECS_HAE_ADDRESS		APECS_IOC_HAXR1
-
-
-/*
- * Data structure for handling APECS machine checks:
- */
-
-struct el_apecs_mikasa_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_base3;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long coma_cnfg3;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-
-	unsigned long pceb_vid;
-	unsigned long pceb_did;
-	unsigned long pceb_revision;
-	unsigned long pceb_command;
-	unsigned long pceb_status;
-	unsigned long pceb_latency;
-	unsigned long pceb_control;
-	unsigned long pceb_arbcon;
-	unsigned long pceb_arbpri;
-
-	unsigned long esc_id;
-	unsigned long esc_revision;
-	unsigned long esc_int0;
-	unsigned long esc_int1;
-	unsigned long esc_elcr0;
-	unsigned long esc_elcr1;
-	unsigned long esc_last_eisa;
-	unsigned long esc_nmi_stat;
-
-	unsigned long pci_ir;
-	unsigned long pci_imr;
-	unsigned long svr_mgr;
-};
-
-/* This for the normal APECS machines.  */
-struct el_apecs_sysdata_mcheck
-{
-	unsigned long coma_gcr;
-	unsigned long coma_edsr;
-	unsigned long coma_ter;
-	unsigned long coma_elar;
-	unsigned long coma_ehar;
-	unsigned long coma_ldlr;
-	unsigned long coma_ldhr;
-	unsigned long coma_base0;
-	unsigned long coma_base1;
-	unsigned long coma_base2;
-	unsigned long coma_cnfg0;
-	unsigned long coma_cnfg1;
-	unsigned long coma_cnfg2;
-	unsigned long epic_dcsr;
-	unsigned long epic_pear;
-	unsigned long epic_sear;
-	unsigned long epic_tbr1;
-	unsigned long epic_tbr2;
-	unsigned long epic_pbr1;
-	unsigned long epic_pbr2;
-	unsigned long epic_pmr1;
-	unsigned long epic_pmr2;
-	unsigned long epic_harx1;
-	unsigned long epic_harx2;
-	unsigned long epic_pmlt;
-	unsigned long epic_tag0;
-	unsigned long epic_tag1;
-	unsigned long epic_tag2;
-	unsigned long epic_tag3;
-	unsigned long epic_tag4;
-	unsigned long epic_tag5;
-	unsigned long epic_tag6;
-	unsigned long epic_tag7;
-	unsigned long epic_data0;
-	unsigned long epic_data1;
-	unsigned long epic_data2;
-	unsigned long epic_data3;
-	unsigned long epic_data4;
-	unsigned long epic_data5;
-	unsigned long epic_data6;
-	unsigned long epic_data7;
-};
-
-struct el_apecs_procdata
-{
-	unsigned long paltemp[32];  /* PAL TEMP REGS. */
-	/* EV4-specific fields */
-	unsigned long exc_addr;     /* Address of excepting instruction. */
-	unsigned long exc_sum;      /* Summary of arithmetic traps. */
-	unsigned long exc_mask;     /* Exception mask (from exc_sum). */
-	unsigned long iccsr;        /* IBox hardware enables. */
-	unsigned long pal_base;     /* Base address for PALcode. */
-	unsigned long hier;         /* Hardware Interrupt Enable. */
-	unsigned long hirr;         /* Hardware Interrupt Request. */
-	unsigned long csr;          /* D-stream fault info. */
-	unsigned long dc_stat;      /* D-cache status (ECC/Parity Err). */
-	unsigned long dc_addr;      /* EV3 Phys Addr for ECC/DPERR. */
-	unsigned long abox_ctl;     /* ABox Control Register. */
-	unsigned long biu_stat;     /* BIU Status. */
-	unsigned long biu_addr;     /* BUI Address. */
-	unsigned long biu_ctl;      /* BIU Control. */
-	unsigned long fill_syndrome;/* For correcting ECC errors. */
-	unsigned long fill_addr;    /* Cache block which was being read */
-	unsigned long va;           /* Effective VA of fault or miss. */
-	unsigned long bc_tag;       /* Backup Cache Tag Probe Results.*/
-};
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the APECS machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define APECS_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-__EXTERN_INLINE unsigned int apecs_ioread8(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x00;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int apecs_ioread16(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void apecs_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= APECS_DENSE_MEM) {
-		addr -= APECS_DENSE_MEM;
-		APECS_SET_HAE;
-		base_and_type = APECS_SPARSE_MEM + 0x08;
-	} else {
-		addr -= APECS_IO;
-		base_and_type = APECS_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int apecs_ioread32(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void apecs_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < APECS_DENSE_MEM)
-		addr = ((addr - APECS_IO) << 5) + APECS_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + APECS_IO);
-}
-
-__EXTERN_INLINE void __iomem *apecs_ioremap(unsigned long addr,
-					    unsigned long size)
-{
-	return (void __iomem *)(addr + APECS_DENSE_MEM);
-}
-
-__EXTERN_INLINE int apecs_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x180000000UL;
-}
-
-__EXTERN_INLINE int apecs_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= APECS_DENSE_MEM;
-}
-
-#undef APECS_SET_HAE
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		apecs
-#define apecs_trivial_io_bw	0
-#define apecs_trivial_io_lq	0
-#define apecs_trivial_rw_bw	2
-#define apecs_trivial_rw_lq	1
-#define apecs_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_APECS__H__ */
diff --git a/arch/alpha/include/asm/core_cia.h b/arch/alpha/include/asm/core_cia.h
index c706a7f2b061..d26bdfb7ca3b 100644
--- a/arch/alpha/include/asm/core_cia.h
+++ b/arch/alpha/include/asm/core_cia.h
@@ -342,7 +342,7 @@ struct el_CIA_sysdata_mcheck {
 #define vuip	volatile unsigned int __force *
 #define vulp	volatile unsigned long __force *
 
-__EXTERN_INLINE unsigned int cia_ioread8(void __iomem *xaddr)
+__EXTERN_INLINE u8 cia_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -374,7 +374,7 @@ __EXTERN_INLINE void cia_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int cia_ioread16(void __iomem *xaddr)
+__EXTERN_INLINE u16 cia_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	unsigned long result, base_and_type;
@@ -404,7 +404,7 @@ __EXTERN_INLINE void cia_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + base_and_type) = w;
 }
 
-__EXTERN_INLINE unsigned int cia_ioread32(void __iomem *xaddr)
+__EXTERN_INLINE u32 cia_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	if (addr < CIA_DENSE_MEM)
@@ -420,6 +420,22 @@ __EXTERN_INLINE void cia_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 cia_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void cia_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long) xaddr;
+	if (addr < CIA_DENSE_MEM)
+		addr = ((addr - CIA_IO) << 5) + CIA_IO + 0x18;
+	*(vulp)addr = b;
+}
+
 __EXTERN_INLINE void __iomem *cia_ioportmap(unsigned long addr)
 {
 	return (void __iomem *)(addr + CIA_IO);
diff --git a/arch/alpha/include/asm/core_lca.h b/arch/alpha/include/asm/core_lca.h
deleted file mode 100644
index 84d5e5b84f4f..000000000000
--- a/arch/alpha/include/asm/core_lca.h
+++ /dev/null
@@ -1,362 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_LCA__H__
-#define __ALPHA_LCA__H__
-
-#include <asm/compiler.h>
-#include <asm/mce.h>
-
-/*
- * Low Cost Alpha (LCA) definitions (these apply to 21066 and 21068,
- * for example).
- *
- * This file is based on:
- *
- *	DECchip 21066 and DECchip 21068 Alpha AXP Microprocessors
- *	Hardware Reference Manual; Digital Equipment Corp.; May 1994;
- *	Maynard, MA; Order Number: EC-N2681-71.
- */
-
-/*
- * NOTE: The LCA uses a Host Address Extension (HAE) register to access
- *	 PCI addresses that are beyond the first 27 bits of address
- *	 space.  Updating the HAE requires an external cycle (and
- *	 a memory barrier), which tends to be slow.  Instead of updating
- *	 it on each sparse memory access, we keep the current HAE value
- *	 cached in variable cache_hae.  Only if the cached HAE differs
- *	 from the desired HAE value do we actually updated HAE register.
- *	 The HAE register is preserved by the interrupt handler entry/exit
- *	 code, so this scheme works even in the presence of interrupts.
- *
- * Dense memory space doesn't require the HAE, but is restricted to
- * aligned 32 and 64 bit accesses.  Special Cycle and Interrupt
- * Acknowledge cycles may also require the use of the HAE.  The LCA
- * limits I/O address space to the bottom 24 bits of address space,
- * but this easily covers the 16 bit ISA I/O address space.
- */
-
-/*
- * NOTE 2! The memory operations do not set any memory barriers, as
- * it's not needed for cases like a frame buffer that is essentially
- * memory-like.  You need to do them by hand if the operations depend
- * on ordering.
- *
- * Similarly, the port I/O operations do a "mb" only after a write
- * operation: if an mb is needed before (as in the case of doing
- * memory mapped I/O first, and then a port I/O operation to the same
- * device), it needs to be done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do
- * the mb all the time, but right now I'm hoping this will work out.
- * Avoiding mb's may potentially be a noticeable speed improvement,
- * but I can't honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to
- * non-interrupts is another fun race area.  Don't do it (because if
- * you do, I'll have to do *everything* with interrupts disabled,
- * ugh).
- */
-
-/*
- * Memory Controller registers:
- */
-#define LCA_MEM_BCR0		(IDENT_ADDR + 0x120000000UL)
-#define LCA_MEM_BCR1		(IDENT_ADDR + 0x120000008UL)
-#define LCA_MEM_BCR2		(IDENT_ADDR + 0x120000010UL)
-#define LCA_MEM_BCR3		(IDENT_ADDR + 0x120000018UL)
-#define LCA_MEM_BMR0		(IDENT_ADDR + 0x120000020UL)
-#define LCA_MEM_BMR1		(IDENT_ADDR + 0x120000028UL)
-#define LCA_MEM_BMR2		(IDENT_ADDR + 0x120000030UL)
-#define LCA_MEM_BMR3		(IDENT_ADDR + 0x120000038UL)
-#define LCA_MEM_BTR0		(IDENT_ADDR + 0x120000040UL)
-#define LCA_MEM_BTR1		(IDENT_ADDR + 0x120000048UL)
-#define LCA_MEM_BTR2		(IDENT_ADDR + 0x120000050UL)
-#define LCA_MEM_BTR3		(IDENT_ADDR + 0x120000058UL)
-#define LCA_MEM_GTR		(IDENT_ADDR + 0x120000060UL)
-#define LCA_MEM_ESR		(IDENT_ADDR + 0x120000068UL)
-#define LCA_MEM_EAR		(IDENT_ADDR + 0x120000070UL)
-#define LCA_MEM_CAR		(IDENT_ADDR + 0x120000078UL)
-#define LCA_MEM_VGR		(IDENT_ADDR + 0x120000080UL)
-#define LCA_MEM_PLM		(IDENT_ADDR + 0x120000088UL)
-#define LCA_MEM_FOR		(IDENT_ADDR + 0x120000090UL)
-
-/*
- * I/O Controller registers:
- */
-#define LCA_IOC_HAE		(IDENT_ADDR + 0x180000000UL)
-#define LCA_IOC_CONF		(IDENT_ADDR + 0x180000020UL)
-#define LCA_IOC_STAT0		(IDENT_ADDR + 0x180000040UL)
-#define LCA_IOC_STAT1		(IDENT_ADDR + 0x180000060UL)
-#define LCA_IOC_TBIA		(IDENT_ADDR + 0x180000080UL)
-#define LCA_IOC_TB_ENA		(IDENT_ADDR + 0x1800000a0UL)
-#define LCA_IOC_SFT_RST		(IDENT_ADDR + 0x1800000c0UL)
-#define LCA_IOC_PAR_DIS		(IDENT_ADDR + 0x1800000e0UL)
-#define LCA_IOC_W_BASE0		(IDENT_ADDR + 0x180000100UL)
-#define LCA_IOC_W_BASE1		(IDENT_ADDR + 0x180000120UL)
-#define LCA_IOC_W_MASK0		(IDENT_ADDR + 0x180000140UL)
-#define LCA_IOC_W_MASK1		(IDENT_ADDR + 0x180000160UL)
-#define LCA_IOC_T_BASE0		(IDENT_ADDR + 0x180000180UL)
-#define LCA_IOC_T_BASE1		(IDENT_ADDR + 0x1800001a0UL)
-#define LCA_IOC_TB_TAG0		(IDENT_ADDR + 0x188000000UL)
-#define LCA_IOC_TB_TAG1		(IDENT_ADDR + 0x188000020UL)
-#define LCA_IOC_TB_TAG2		(IDENT_ADDR + 0x188000040UL)
-#define LCA_IOC_TB_TAG3		(IDENT_ADDR + 0x188000060UL)
-#define LCA_IOC_TB_TAG4		(IDENT_ADDR + 0x188000070UL)
-#define LCA_IOC_TB_TAG5		(IDENT_ADDR + 0x1880000a0UL)
-#define LCA_IOC_TB_TAG6		(IDENT_ADDR + 0x1880000c0UL)
-#define LCA_IOC_TB_TAG7		(IDENT_ADDR + 0x1880000e0UL)
-
-/*
- * Memory spaces:
- */
-#define LCA_IACK_SC		(IDENT_ADDR + 0x1a0000000UL)
-#define LCA_CONF		(IDENT_ADDR + 0x1e0000000UL)
-#define LCA_IO			(IDENT_ADDR + 0x1c0000000UL)
-#define LCA_SPARSE_MEM		(IDENT_ADDR + 0x200000000UL)
-#define LCA_DENSE_MEM		(IDENT_ADDR + 0x300000000UL)
-
-/*
- * Bit definitions for I/O Controller status register 0:
- */
-#define LCA_IOC_STAT0_CMD		0xf
-#define LCA_IOC_STAT0_ERR		(1<<4)
-#define LCA_IOC_STAT0_LOST		(1<<5)
-#define LCA_IOC_STAT0_THIT		(1<<6)
-#define LCA_IOC_STAT0_TREF		(1<<7)
-#define LCA_IOC_STAT0_CODE_SHIFT	8
-#define LCA_IOC_STAT0_CODE_MASK		0x7
-#define LCA_IOC_STAT0_P_NBR_SHIFT	13
-#define LCA_IOC_STAT0_P_NBR_MASK	0x7ffff
-
-#define LCA_HAE_ADDRESS		LCA_IOC_HAE
-
-/* LCA PMR Power Management register defines */
-#define LCA_PMR_ADDR	(IDENT_ADDR + 0x120000098UL)
-#define LCA_PMR_PDIV    0x7                     /* Primary clock divisor */
-#define LCA_PMR_ODIV    0x38                    /* Override clock divisor */
-#define LCA_PMR_INTO    0x40                    /* Interrupt override */
-#define LCA_PMR_DMAO    0x80                    /* DMA override */
-#define LCA_PMR_OCCEB   0xffff0000L             /* Override cycle counter - even bits */
-#define LCA_PMR_OCCOB   0xffff000000000000L     /* Override cycle counter - even bits */
-#define LCA_PMR_PRIMARY_MASK    0xfffffffffffffff8L
-
-/* LCA PMR Macros */
-
-#define LCA_READ_PMR        (*(volatile unsigned long *)LCA_PMR_ADDR)
-#define LCA_WRITE_PMR(d)    (*((volatile unsigned long *)LCA_PMR_ADDR) = (d))
-
-#define LCA_GET_PRIMARY(r)  ((r) & LCA_PMR_PDIV)
-#define LCA_GET_OVERRIDE(r) (((r) >> 3) & LCA_PMR_PDIV)
-#define LCA_SET_PRIMARY_CLOCK(r, c) ((r) = (((r) & LCA_PMR_PRIMARY_MASK)|(c)))
-
-/* LCA PMR Divisor values */
-#define LCA_PMR_DIV_1   0x0
-#define LCA_PMR_DIV_1_5 0x1
-#define LCA_PMR_DIV_2   0x2
-#define LCA_PMR_DIV_4   0x3
-#define LCA_PMR_DIV_8   0x4
-#define LCA_PMR_DIV_16  0x5
-#define LCA_PMR_DIV_MIN DIV_1
-#define LCA_PMR_DIV_MAX DIV_16
-
-
-/*
- * Data structure for handling LCA machine checks.  Correctable errors
- * result in a short logout frame, uncorrectable ones in a long one.
- */
-struct el_lca_mcheck_short {
-	struct el_common	h;		/* common logout header */
-	unsigned long		esr;		/* error-status register */
-	unsigned long		ear;		/* error-address register */
-	unsigned long		dc_stat;	/* dcache status register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-};
-
-struct el_lca_mcheck_long {
-	struct el_common	h;		/* common logout header */
-	unsigned long		pt[31];		/* PAL temps */
-	unsigned long		exc_addr;	/* exception address */
-	unsigned long		pad1[3];
-	unsigned long		pal_base;	/* PALcode base address */
-	unsigned long		hier;		/* hw interrupt enable */
-	unsigned long		hirr;		/* hw interrupt request */
-	unsigned long		mm_csr;		/* MMU control & status */
-	unsigned long		dc_stat;	/* data cache status */
-	unsigned long		dc_addr;	/* data cache addr register */
-	unsigned long		abox_ctl;	/* address box control register */
-	unsigned long		esr;		/* error status register */
-	unsigned long		ear;		/* error address register */
-	unsigned long		car;		/* cache control register */
-	unsigned long		ioc_stat0;	/* I/O controller status register 0 */
-	unsigned long		ioc_stat1;	/* I/O controller status register 1 */
-	unsigned long		va;		/* virtual address register */
-};
-
-union el_lca {
-	struct el_common *		c;
-	struct el_lca_mcheck_long *	l;
-	struct el_lca_mcheck_short *	s;
-};
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * I/O functions:
- *
- * Unlike Jensen, the Noname machines have no concept of local
- * I/O---everything goes over the PCI bus.
- *
- * There is plenty room for optimization here.  In particular,
- * the Alpha's insb/insw/extb/extw should be useful in moving
- * data to/from the right byte-lanes.
- */
-
-#define vip	volatile int __force *
-#define vuip	volatile unsigned int __force *
-#define vulp	volatile unsigned long __force *
-
-#define LCA_SET_HAE						\
-	do {							\
-		if (addr >= (1UL << 24)) {			\
-			unsigned long msb = addr & 0xf8000000;	\
-			addr -= msb;				\
-			set_hae(msb);				\
-		}						\
-	} while (0)
-
-
-__EXTERN_INLINE unsigned int lca_ioread8(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extbl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite8(u8 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x00;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x00;
-	}
-
-	w = __kernel_insbl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int lca_ioread16(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long result, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	result = *(vip) ((addr << 5) + base_and_type);
-	return __kernel_extwl(result, addr & 3);
-}
-
-__EXTERN_INLINE void lca_iowrite16(u16 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long w, base_and_type;
-
-	if (addr >= LCA_DENSE_MEM) {
-		addr -= LCA_DENSE_MEM;
-		LCA_SET_HAE;
-		base_and_type = LCA_SPARSE_MEM + 0x08;
-	} else {
-		addr -= LCA_IO;
-		base_and_type = LCA_IO + 0x08;
-	}
-
-	w = __kernel_inswl(b, addr & 3);
-	*(vuip) ((addr << 5) + base_and_type) = w;
-}
-
-__EXTERN_INLINE unsigned int lca_ioread32(void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	return *(vuip)addr;
-}
-
-__EXTERN_INLINE void lca_iowrite32(u32 b, void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	if (addr < LCA_DENSE_MEM)
-		addr = ((addr - LCA_IO) << 5) + LCA_IO + 0x18;
-	*(vuip)addr = b;
-}
-
-__EXTERN_INLINE void __iomem *lca_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)(addr + LCA_IO);
-}
-
-__EXTERN_INLINE void __iomem *lca_ioremap(unsigned long addr,
-					  unsigned long size)
-{
-	return (void __iomem *)(addr + LCA_DENSE_MEM);
-}
-
-__EXTERN_INLINE int lca_is_ioaddr(unsigned long addr)
-{
-	return addr >= IDENT_ADDR + 0x120000000UL;
-}
-
-__EXTERN_INLINE int lca_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= LCA_DENSE_MEM;
-}
-
-#undef vip
-#undef vuip
-#undef vulp
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		lca
-#define lca_trivial_rw_bw	2
-#define lca_trivial_rw_lq	1
-#define lca_trivial_io_bw	0
-#define lca_trivial_io_lq	0
-#define lca_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_LCA__H__ */
diff --git a/arch/alpha/include/asm/core_marvel.h b/arch/alpha/include/asm/core_marvel.h
index cc6fd92d5fa9..d99f3a82e0e5 100644
--- a/arch/alpha/include/asm/core_marvel.h
+++ b/arch/alpha/include/asm/core_marvel.h
@@ -332,10 +332,10 @@ struct io7 {
 #define vucp	volatile unsigned char __force *
 #define vusp	volatile unsigned short __force *
 
-extern unsigned int marvel_ioread8(void __iomem *);
+extern u8 marvel_ioread8(const void __iomem *);
 extern void marvel_iowrite8(u8 b, void __iomem *);
 
-__EXTERN_INLINE unsigned int marvel_ioread16(void __iomem *addr)
+__EXTERN_INLINE u16 marvel_ioread16(const void __iomem *addr)
 {
 	return __kernel_ldwu(*(vusp)addr);
 }
diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h
index b30dc128210d..ed2bf8ad40ed 100644
--- a/arch/alpha/include/asm/core_mcpcia.h
+++ b/arch/alpha/include/asm/core_mcpcia.h
@@ -248,6 +248,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck {
 
 #define vip	volatile int __force *
 #define vuip	volatile unsigned int __force *
+#define vulp	volatile unsigned long __force *
 
 #ifndef MCPCIA_ONE_HAE_WINDOW
 #define MCPCIA_FROB_MMIO						\
@@ -267,7 +268,7 @@ extern inline int __mcpcia_is_mmio(unsigned long addr)
 	return (addr & 0x80000000UL) == 0;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread8(void __iomem *xaddr)
+__EXTERN_INLINE u8 mcpcia_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
 	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
@@ -291,7 +292,7 @@ __EXTERN_INLINE void mcpcia_iowrite8(u8 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + hose + 0x00) = w;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread16(void __iomem *xaddr)
+__EXTERN_INLINE u16 mcpcia_ioread16(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr & MCPCIA_MEM_MASK;
 	unsigned long hose = (unsigned long)xaddr & ~MCPCIA_MEM_MASK;
@@ -315,7 +316,7 @@ __EXTERN_INLINE void mcpcia_iowrite16(u16 b, void __iomem *xaddr)
 	*(vuip) ((addr << 5) + hose + 0x08) = w;
 }
 
-__EXTERN_INLINE unsigned int mcpcia_ioread32(void __iomem *xaddr)
+__EXTERN_INLINE u32 mcpcia_ioread32(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long)xaddr;
 
@@ -335,6 +336,26 @@ __EXTERN_INLINE void mcpcia_iowrite32(u32 b, void __iomem *xaddr)
 	*(vuip)addr = b;
 }
 
+__EXTERN_INLINE u64 mcpcia_ioread64(const void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	return *(vulp)addr;
+}
+
+__EXTERN_INLINE void mcpcia_iowrite64(u64 b, void __iomem *xaddr)
+{
+	unsigned long addr = (unsigned long)xaddr;
+
+	if (!__mcpcia_is_mmio(addr))
+		addr = ((addr & 0xffff) << 5) + (addr & ~0xfffful) + 0x18;
+
+	*(vulp)addr = b;
+}
+
 
 __EXTERN_INLINE void __iomem *mcpcia_ioportmap(unsigned long addr)
 {
@@ -362,6 +383,7 @@ __EXTERN_INLINE int mcpcia_is_mmio(const volatile void __iomem *xaddr)
 
 #undef vip
 #undef vuip
+#undef vulp
 
 #undef __IO_PREFIX
 #define __IO_PREFIX		mcpcia
diff --git a/arch/alpha/include/asm/core_t2.h b/arch/alpha/include/asm/core_t2.h
index e0b33d09e93a..ca9b091d9c5f 100644
--- a/arch/alpha/include/asm/core_t2.h
+++ b/arch/alpha/include/asm/core_t2.h
@@ -25,16 +25,8 @@
 #define T2_MEM_R1_MASK 0x07ffffff  /* Mem sparse region 1 mask is 27 bits */
 
 /* GAMMA-SABLE is a SABLE with EV5-based CPUs */
-/* All LYNX machines, EV4 or EV5, use the GAMMA bias also */
 #define _GAMMA_BIAS		0x8000000000UL
-
-#if defined(CONFIG_ALPHA_GENERIC)
-#define GAMMA_BIAS		alpha_mv.sys.t2.gamma_bias
-#elif defined(CONFIG_ALPHA_GAMMA)
 #define GAMMA_BIAS		_GAMMA_BIAS
-#else
-#define GAMMA_BIAS		0
-#endif
 
 /*
  * Memory spaces:
@@ -360,6 +352,7 @@ struct el_t2_frame_corrected {
 
 #define vip	volatile int *
 #define vuip	volatile unsigned int *
+#define vulp	volatile unsigned long *
 
 extern inline u8 t2_inb(unsigned long addr)
 {
@@ -402,6 +395,17 @@ extern inline void t2_outl(u32 b, unsigned long addr)
 	mb();
 }
 
+extern inline u64 t2_inq(unsigned long addr)
+{
+	return *(vulp) ((addr << 5) + T2_IO + 0x18);
+}
+
+extern inline void t2_outq(u64 b, unsigned long addr)
+{
+	*(vulp) ((addr << 5) + T2_IO + 0x18) = b;
+	mb();
+}
+
 
 /*
  * Memory functions.
@@ -572,7 +576,7 @@ __EXTERN_INLINE int t2_is_mmio(const volatile void __iomem *addr)
    it doesn't make sense to merge the pio and mmio routines.  */
 
 #define IOPORT(OS, NS)							\
-__EXTERN_INLINE unsigned int t2_ioread##NS(void __iomem *xaddr)		\
+__EXTERN_INLINE u##NS t2_ioread##NS(const void __iomem *xaddr)		\
 {									\
 	if (t2_is_mmio(xaddr))						\
 		return t2_read##OS(xaddr);				\
@@ -590,11 +594,13 @@ __EXTERN_INLINE void t2_iowrite##NS(u##NS b, void __iomem *xaddr)	\
 IOPORT(b, 8)
 IOPORT(w, 16)
 IOPORT(l, 32)
+IOPORT(q, 64)
 
 #undef IOPORT
 
 #undef vip
 #undef vuip
+#undef vulp
 
 #undef __IO_PREFIX
 #define __IO_PREFIX		t2
diff --git a/arch/alpha/include/asm/div64.h b/arch/alpha/include/asm/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/arch/alpha/include/asm/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/arch/alpha/include/asm/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h
index 0ee6a5c99b16..ad5a59b035cb 100644
--- a/arch/alpha/include/asm/dma-mapping.h
+++ b/arch/alpha/include/asm/dma-mapping.h
@@ -4,13 +4,9 @@
 
 extern const struct dma_map_ops alpha_pci_ops;
 
-static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
+static inline const struct dma_map_ops *get_arch_dma_ops(void)
 {
-#ifdef CONFIG_ALPHA_JENSEN
-	return NULL;
-#else
 	return &alpha_pci_ops;
-#endif
 }
 
 #endif	/* _ALPHA_DMA_MAPPING_H */
diff --git a/arch/alpha/include/asm/dma.h b/arch/alpha/include/asm/dma.h
index 28610ea7786d..3a88812b7165 100644
--- a/arch/alpha/include/asm/dma.h
+++ b/arch/alpha/include/asm/dma.h
@@ -82,11 +82,6 @@
   just a wiring limit.
 */
 
-/* The maximum address for ISA DMA transfer on Alpha XL, due to an
-   hardware SIO limitation, is 64MB.
-*/
-#define ALPHA_XL_MAX_ISA_DMA_ADDRESS		0x04000000UL
-
 /* The maximum address for ISA DMA transfer on RUFFIAN,
    due to an hardware SIO limitation, is 16MB.
 */
@@ -107,9 +102,7 @@
 #ifdef CONFIG_ALPHA_GENERIC
 # define MAX_ISA_DMA_ADDRESS		(alpha_mv.max_isa_dma_address)
 #else
-# if defined(CONFIG_ALPHA_XL)
-#  define MAX_ISA_DMA_ADDRESS		ALPHA_XL_MAX_ISA_DMA_ADDRESS
-# elif defined(CONFIG_ALPHA_RUFFIAN)
+# if defined(CONFIG_ALPHA_RUFFIAN)
 #  define MAX_ISA_DMA_ADDRESS		ALPHA_RUFFIAN_MAX_ISA_DMA_ADDRESS
 # elif defined(CONFIG_ALPHA_SABLE)
 #  define MAX_ISA_DMA_ADDRESS		ALPHA_SABLE_MAX_ISA_DMA_ADDRESS
@@ -365,13 +358,4 @@ extern void free_dma(unsigned int dmanr);	/* release it again */
 #define KERNEL_HAVE_CHECK_DMA
 extern int check_dma(unsigned int dmanr);
 
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 	(0)
-#endif
-
-
 #endif /* _ASM_DMA_H */
diff --git a/arch/alpha/include/asm/elf.h b/arch/alpha/include/asm/elf.h
index 8049997fa372..50c82187e60e 100644
--- a/arch/alpha/include/asm/elf.h
+++ b/arch/alpha/include/asm/elf.h
@@ -74,7 +74,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
-#define elf_check_arch(x) ((x)->e_machine == EM_ALPHA)
+#define elf_check_arch(x) (((x)->e_machine == EM_ALPHA) && !((x)->e_flags & EF_ALPHA_32BIT))
 
 /*
  * These are used to set parameters in the core dumps.
@@ -120,12 +120,6 @@ extern int dump_elf_task(elf_greg_t *dest, struct task_struct *task);
 #define ELF_CORE_COPY_TASK_REGS(TASK, DEST) \
 	dump_elf_task(*(DEST), TASK)
 
-/* Similar, but for the FP registers.  */
-
-extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
-#define ELF_CORE_COPY_FPREGS(TASK, DEST) \
-	dump_elf_task_fp(*(DEST), TASK)
-
 /* This yields a mask that user programs can use to figure out what
    instruction set this CPU supports.  This is trivial on Alpha, 
    but not so on other machines. */
@@ -139,16 +133,10 @@ extern int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task);
 #define ELF_PLATFORM				\
 ({						\
 	enum implver_enum i_ = implver();	\
-	( i_ == IMPLVER_EV4 ? "ev4"		\
-	: i_ == IMPLVER_EV5			\
-	  ? (amask(AMASK_BWX) ? "ev5" : "ev56")	\
+	( i_ == IMPLVER_EV5 ? "ev56"			\
 	: amask (AMASK_CIX) ? "ev6" : "ev67");	\
 })
 
-#define SET_PERSONALITY(EX)					\
-	set_personality(((EX).e_flags & EF_ALPHA_32BIT)		\
-	   ? PER_LINUX_32BIT : PER_LINUX)
-
 extern int alpha_l1i_cacheshape;
 extern int alpha_l1d_cacheshape;
 extern int alpha_l2_cacheshape;
diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h
index 942924756cf2..5a6239e65097 100644
--- a/arch/alpha/include/asm/floppy.h
+++ b/arch/alpha/include/asm/floppy.h
@@ -11,8 +11,8 @@
 #define __ASM_ALPHA_FLOPPY_H
 
 
-#define fd_inb(port)			inb_p(port)
-#define fd_outb(value,port)		outb_p(value,port)
+#define fd_inb(base, reg)		inb_p((base) + (reg))
+#define fd_outb(value, base, reg)	outb_p(value, (base) + (reg))
 
 #define fd_enable_dma()         enable_dma(FLOPPY_DMA)
 #define fd_disable_dma()        disable_dma(FLOPPY_DMA)
@@ -20,7 +20,7 @@
 #define fd_free_dma()           free_dma(FLOPPY_DMA)
 #define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
 #define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA,mode)
-#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,virt_to_bus(addr))
+#define fd_set_dma_addr(addr)   set_dma_addr(FLOPPY_DMA,isa_virt_to_bus(addr))
 #define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA,count)
 #define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
 #define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
@@ -43,17 +43,18 @@ alpha_fd_dma_setup(char *addr, unsigned long size, int mode, int io)
 	static int prev_dir;
 	int dir;
 
-	dir = (mode != DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
+	dir = (mode != DMA_MODE_READ) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
 
 	if (bus_addr 
 	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
 		/* different from last time -- unmap prev */
-		pci_unmap_single(isa_bridge, bus_addr, prev_size, prev_dir);
+		dma_unmap_single(&isa_bridge->dev, bus_addr, prev_size,
+				 prev_dir);
 		bus_addr = 0;
 	}
 
 	if (!bus_addr)	/* need to map it */
-		bus_addr = pci_map_single(isa_bridge, addr, size, dir);
+		bus_addr = dma_map_single(&isa_bridge->dev, addr, size, dir);
 
 	/* remember this one as prev */
 	prev_addr = addr;
@@ -89,25 +90,6 @@ static int FDC2 = -1;
 #define N_FDC 2
 #define N_DRIVE 8
 
-/*
- * Most Alphas have no problems with floppy DMA crossing 64k borders,
- * except for certain ones, like XL and RUFFIAN.
- *
- * However, the test is simple and fast, and this *is* floppy, after all,
- * so we do it for all platforms, just to make sure.
- *
- * This is advantageous in other circumstances as well, as in moving
- * about the PCI DMA windows and forcing the floppy to start doing
- * scatter-gather when it never had before, and there *is* a problem
- * on that platform... ;-}
- */
-
-static inline unsigned long CROSS_64KB(void *a, unsigned long s)
-{
-	unsigned long p = (unsigned long)a;
-	return ((p + s - 1) ^ p) & ~0xffffUL;
-}
-
 #define EXTRA_FLOPPY_PARAMS
 
 #endif /* __ASM_ALPHA_FLOPPY_H */
diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h
index b9691405e56b..30b24135dd7a 100644
--- a/arch/alpha/include/asm/fpu.h
+++ b/arch/alpha/include/asm/fpu.h
@@ -15,21 +15,27 @@ rdfpcr(void)
 {
 	unsigned long tmp, ret;
 
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		ret = current_thread_info()->fp[31];
+	} else {
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"ftoit $f0,%1\n\t"
-		"itoft %0,$f0"
-		: "=r"(tmp), "=r"(ret));
+		__asm__ __volatile__ (
+			"ftoit $f0,%0\n\t"
+			"mf_fpcr $f0\n\t"
+			"ftoit $f0,%1\n\t"
+			"itoft %0,$f0"
+			: "=r"(tmp), "=r"(ret));
 #else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"mf_fpcr $f0\n\t"
-		"stt $f0,%1\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp), "=m"(ret));
+		__asm__ __volatile__ (
+			"stt $f0,%0\n\t"
+			"mf_fpcr $f0\n\t"
+			"stt $f0,%1\n\t"
+			"ldt $f0,%0"
+			: "=m"(tmp), "=m"(ret));
 #endif
+	}
+	preempt_enable();
 
 	return ret;
 }
@@ -39,21 +45,28 @@ wrfpcr(unsigned long val)
 {
 	unsigned long tmp;
 
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		current_thread_info()->fp[31] = val;
+	} else {
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
-	__asm__ __volatile__ (
-		"ftoit $f0,%0\n\t"
-		"itoft %1,$f0\n\t"
-		"mt_fpcr $f0\n\t"
-		"itoft %0,$f0"
-		: "=&r"(tmp) : "r"(val));
+		__asm__ __volatile__ (
+			"ftoit $f0,%0\n\t"
+			"itoft %1,$f0\n\t"
+			"mt_fpcr $f0\n\t"
+			"itoft %0,$f0"
+			: "=&r"(tmp) : "r"(val));
 #else
-	__asm__ __volatile__ (
-		"stt $f0,%0\n\t"
-		"ldt $f0,%1\n\t"
-		"mt_fpcr $f0\n\t"
-		"ldt $f0,%0"
-		: "=m"(tmp) : "m"(val));
+		__asm__ __volatile__ (
+			"stt $f0,%0\n\t"
+			"ldt $f0,%1\n\t"
+			"mt_fpcr $f0\n\t"
+			"ldt $f0,%0"
+			: "=m"(tmp) : "m"(val));
 #endif
+	}
+	preempt_enable();
 }
 
 static inline unsigned long
diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h
index bfd3c01038f8..da67afd578fd 100644
--- a/arch/alpha/include/asm/futex.h
+++ b/arch/alpha/include/asm/futex.h
@@ -31,7 +31,8 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
 {
 	int oldval = 0, ret;
 
-	pagefault_disable();
+	if (!access_ok(uaddr, sizeof(u32)))
+		return -EFAULT;
 
 	switch (op) {
 	case FUTEX_OP_SET:
@@ -53,8 +54,6 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
 		ret = -ENOSYS;
 	}
 
-	pagefault_enable();
-
 	if (!ret)
 		*oval = oldval;
 
diff --git a/arch/alpha/include/asm/hwrpb.h b/arch/alpha/include/asm/hwrpb.h
index d8180e527a1e..db831cf8de10 100644
--- a/arch/alpha/include/asm/hwrpb.h
+++ b/arch/alpha/include/asm/hwrpb.h
@@ -135,7 +135,7 @@ struct crb_struct {
 	/* virtual->physical map */
 	unsigned long map_entries;
 	unsigned long map_pages;
-	struct vf_map_struct map[1];
+	struct vf_map_struct map[];
 };
 
 struct memclust_struct {
@@ -152,7 +152,7 @@ struct memdesc_struct {
 	unsigned long chksum;
 	unsigned long optional_pa;
 	unsigned long numclusters;
-	struct memclust_struct cluster[0];
+	struct memclust_struct cluster[];
 };
 
 struct dsr_struct {
diff --git a/arch/alpha/include/asm/io.h b/arch/alpha/include/asm/io.h
index af2c0063dc75..fa3e4c246cda 100644
--- a/arch/alpha/include/asm/io.h
+++ b/arch/alpha/include/asm/io.h
@@ -7,18 +7,9 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <asm/compiler.h>
-#include <asm/pgtable.h>
 #include <asm/machvec.h>
 #include <asm/hwrpb.h>
 
-/* The generic header contains only prototypes.  Including it ensures that
-   the implementation we have here matches that interface.  */
-#include <asm-generic/iomap.h>
-
-/* We don't use IO slowdowns on the Alpha, but.. */
-#define __SLOW_DOWN_IO	do { } while (0)
-#define SLOW_DOWN_IO	do { } while (0)
-
 /*
  * Virtual -> physical identity mapping starts at this offset
  */
@@ -61,7 +52,7 @@ extern inline void set_hae(unsigned long new_hae)
  * Change virtual addresses to physical addresses and vv.
  */
 #ifdef USE_48_BIT_KSEG
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
 	return (unsigned long)address - IDENT_ADDR;
 }
@@ -71,7 +62,7 @@ static inline void * phys_to_virt(unsigned long address)
 	return (void *) (address + IDENT_ADDR);
 }
 #else
-static inline unsigned long virt_to_phys(void *address)
+static inline unsigned long virt_to_phys(volatile void *address)
 {
         unsigned long phys = (unsigned long)address;
 
@@ -91,7 +82,8 @@ static inline void * phys_to_virt(unsigned long address)
 }
 #endif
 
-#define page_to_phys(page)	page_to_pa(page)
+#define virt_to_phys		virt_to_phys
+#define phys_to_virt		phys_to_virt
 
 /* Maximum PIO space address supported?  */
 #define IO_SPACE_LIMIT 0xffff
@@ -107,15 +99,15 @@ static inline void * phys_to_virt(unsigned long address)
 extern unsigned long __direct_map_base;
 extern unsigned long __direct_map_size;
 
-static inline unsigned long __deprecated virt_to_bus(void *address)
+static inline unsigned long __deprecated isa_virt_to_bus(volatile void *address)
 {
 	unsigned long phys = virt_to_phys(address);
 	unsigned long bus = phys + __direct_map_base;
 	return phys <= __direct_map_size ? bus : 0;
 }
-#define isa_virt_to_bus virt_to_bus
+#define isa_virt_to_bus isa_virt_to_bus
 
-static inline void * __deprecated bus_to_virt(unsigned long address)
+static inline void * __deprecated isa_bus_to_virt(unsigned long address)
 {
 	void *virt;
 
@@ -126,7 +118,7 @@ static inline void * __deprecated bus_to_virt(unsigned long address)
 	virt = phys_to_virt(address);
 	return (long)address <= 0 ? NULL : virt;
 }
-#define isa_bus_to_virt bus_to_virt
+#define isa_bus_to_virt isa_bus_to_virt
 
 /*
  * There are different chipsets to interface the Alpha CPUs to the world.
@@ -151,9 +143,10 @@ static inline void generic_##NAME(TYPE b, QUAL void __iomem *addr)	\
 	alpha_mv.mv_##NAME(b, addr);					\
 }
 
-REMAP1(unsigned int, ioread8, /**/)
-REMAP1(unsigned int, ioread16, /**/)
-REMAP1(unsigned int, ioread32, /**/)
+REMAP1(unsigned int, ioread8, const)
+REMAP1(unsigned int, ioread16, const)
+REMAP1(unsigned int, ioread32, const)
+REMAP1(u64, ioread64, const)
 REMAP1(u8, readb, const volatile)
 REMAP1(u16, readw, const volatile)
 REMAP1(u32, readl, const volatile)
@@ -162,6 +155,7 @@ REMAP1(u64, readq, const volatile)
 REMAP2(u8, iowrite8, /**/)
 REMAP2(u16, iowrite16, /**/)
 REMAP2(u32, iowrite32, /**/)
+REMAP2(u64, iowrite64, /**/)
 REMAP2(u8, writeb, volatile)
 REMAP2(u16, writew, volatile)
 REMAP2(u32, writel, volatile)
@@ -204,16 +198,10 @@ static inline int generic_is_mmio(const volatile void __iomem *a)
 
 #else
 
-#if defined(CONFIG_ALPHA_APECS)
-# include <asm/core_apecs.h>
-#elif defined(CONFIG_ALPHA_CIA)
+#if defined(CONFIG_ALPHA_CIA)
 # include <asm/core_cia.h>
 #elif defined(CONFIG_ALPHA_IRONGATE)
 # include <asm/core_irongate.h>
-#elif defined(CONFIG_ALPHA_JENSEN)
-# include <asm/jensen.h>
-#elif defined(CONFIG_ALPHA_LCA)
-# include <asm/core_lca.h>
 #elif defined(CONFIG_ALPHA_MARVEL)
 # include <asm/core_marvel.h>
 #elif defined(CONFIG_ALPHA_MCPCIA)
@@ -243,6 +231,12 @@ extern u32		inl(unsigned long port);
 extern void		outb(u8 b, unsigned long port);
 extern void		outw(u16 b, unsigned long port);
 extern void		outl(u32 b, unsigned long port);
+#define inb inb
+#define inw inw
+#define inl inl
+#define outb outb
+#define outw outw
+#define outl outl
 
 extern u8		readb(const volatile void __iomem *addr);
 extern u16		readw(const volatile void __iomem *addr);
@@ -252,6 +246,14 @@ extern void		writeb(u8 b, volatile void __iomem *addr);
 extern void		writew(u16 b, volatile void __iomem *addr);
 extern void		writel(u32 b, volatile void __iomem *addr);
 extern void		writeq(u64 b, volatile void __iomem *addr);
+#define readb readb
+#define readw readw
+#define readl readl
+#define readq readq
+#define writeb writeb
+#define writew writew
+#define writel writel
+#define writeq writeq
 
 extern u8		__raw_readb(const volatile void __iomem *addr);
 extern u16		__raw_readw(const volatile void __iomem *addr);
@@ -261,14 +263,33 @@ extern void		__raw_writeb(u8 b, volatile void __iomem *addr);
 extern void		__raw_writew(u16 b, volatile void __iomem *addr);
 extern void		__raw_writel(u32 b, volatile void __iomem *addr);
 extern void		__raw_writeq(u64 b, volatile void __iomem *addr);
+#define __raw_readb __raw_readb
+#define __raw_readw __raw_readw
+#define __raw_readl __raw_readl
+#define __raw_readq __raw_readq
+#define __raw_writeb __raw_writeb
+#define __raw_writew __raw_writew
+#define __raw_writel __raw_writel
+#define __raw_writeq __raw_writeq
+
+extern unsigned int ioread8(const void __iomem *);
+extern unsigned int ioread16(const void __iomem *);
+extern unsigned int ioread32(const void __iomem *);
+extern u64 ioread64(const void __iomem *);
+
+extern void iowrite8(u8, void __iomem *);
+extern void iowrite16(u16, void __iomem *);
+extern void iowrite32(u32, void __iomem *);
+extern void iowrite64(u64, void __iomem *);
+
+extern void ioread8_rep(const void __iomem *port, void *buf, unsigned long count);
+extern void ioread16_rep(const void __iomem *port, void *buf, unsigned long count);
+extern void ioread32_rep(const void __iomem *port, void *buf, unsigned long count);
+
+extern void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count);
+extern void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count);
 
-/*
- * Mapping from port numbers to __iomem space is pretty easy.
- */
-
-/* These two have to be extern inline because of the extern prototype from
-   <asm-generic/iomap.h>.  It is not legal to mix "extern" and "static" for
-   the same declaration.  */
 extern inline void __iomem *ioport_map(unsigned long port, unsigned int size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
@@ -278,25 +299,15 @@ extern inline void ioport_unmap(void __iomem *addr)
 {
 }
 
+#define ioport_map ioport_map
+#define ioport_unmap ioport_unmap
+
 static inline void __iomem *ioremap(unsigned long port, unsigned long size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioremap) (port, size);
 }
 
-static inline void __iomem *__ioremap(unsigned long port, unsigned long size,
-				      unsigned long flags)
-{
-	return ioremap(port, size);
-}
-
-static inline void __iomem * ioremap_nocache(unsigned long offset,
-					     unsigned long size)
-{
-	return ioremap(offset, size);
-}
-
-#define ioremap_wc ioremap_nocache
-#define ioremap_uc ioremap_nocache
+#define ioremap_wc ioremap
 
 static inline void iounmap(volatile void __iomem *addr)
 {
@@ -320,16 +331,20 @@ static inline int __is_mmio(const volatile void __iomem *addr)
  */
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
-extern inline unsigned int ioread8(void __iomem *addr)
+extern inline unsigned int ioread8(const void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
 	mb();
 	return ret;
 }
 
-extern inline unsigned int ioread16(void __iomem *addr)
+extern inline unsigned int ioread16(const void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
 	mb();
 	return ret;
 }
@@ -367,10 +382,26 @@ extern inline void outw(u16 b, unsigned long port)
 }
 #endif
 
+#define ioread8 ioread8
+#define ioread16 ioread16
+#define iowrite8 iowrite8
+#define iowrite16 iowrite16
+
 #if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
-extern inline unsigned int ioread32(void __iomem *addr)
+extern inline unsigned int ioread32(const void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
+	mb();
+	return ret;
+}
+
+extern inline u64 ioread64(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread64)(addr);
 	mb();
 	return ret;
 }
@@ -381,6 +412,12 @@ extern inline void iowrite32(u32 b, void __iomem *addr)
 	IO_CONCAT(__IO_PREFIX, iowrite32)(b, addr);
 }
 
+extern inline void iowrite64(u64 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX, iowrite64)(b, addr);
+}
+
 extern inline u32 inl(unsigned long port)
 {
 	return ioread32(ioport_map(port, 4));
@@ -392,6 +429,11 @@ extern inline void outl(u32 b, unsigned long port)
 }
 #endif
 
+#define ioread32 ioread32
+#define ioread64 ioread64
+#define iowrite32 iowrite32
+#define iowrite64 iowrite64
+
 #if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
 extern inline u8 __raw_readb(const volatile void __iomem *addr)
 {
@@ -415,14 +457,18 @@ extern inline void __raw_writew(u16 b, volatile void __iomem *addr)
 
 extern inline u8 readb(const volatile void __iomem *addr)
 {
-	u8 ret = __raw_readb(addr);
+	u8 ret;
+	mb();
+	ret = __raw_readb(addr);
 	mb();
 	return ret;
 }
 
 extern inline u16 readw(const volatile void __iomem *addr)
 {
-	u16 ret = __raw_readw(addr);
+	u16 ret;
+	mb();
+	ret = __raw_readw(addr);
 	mb();
 	return ret;
 }
@@ -463,14 +509,18 @@ extern inline void __raw_writeq(u64 b, volatile void __iomem *addr)
 
 extern inline u32 readl(const volatile void __iomem *addr)
 {
-	u32 ret = __raw_readl(addr);
+	u32 ret;
+	mb();
+	ret = __raw_readl(addr);
 	mb();
 	return ret;
 }
 
 extern inline u64 readq(const volatile void __iomem *addr)
 {
-	u64 ret = __raw_readq(addr);
+	u64 ret;
+	mb();
+	ret = __raw_readq(addr);
 	mb();
 	return ret;
 }
@@ -488,10 +538,12 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
 }
 #endif
 
-#define ioread16be(p) be16_to_cpu(ioread16(p))
-#define ioread32be(p) be32_to_cpu(ioread32(p))
-#define iowrite16be(v,p) iowrite16(cpu_to_be16(v), (p))
-#define iowrite32be(v,p) iowrite32(cpu_to_be32(v), (p))
+#define ioread16be(p) swab16(ioread16(p))
+#define ioread32be(p) swab32(ioread32(p))
+#define ioread64be(p) swab64(ioread64(p))
+#define iowrite16be(v,p) iowrite16(swab16(v), (p))
+#define iowrite32be(v,p) iowrite32(swab32(v), (p))
+#define iowrite64be(v,p) iowrite64(swab64(v), (p))
 
 #define inb_p		inb
 #define inw_p		inw
@@ -499,14 +551,48 @@ extern inline void writeq(u64 b, volatile void __iomem *addr)
 #define outb_p		outb
 #define outw_p		outw
 #define outl_p		outl
-#define readb_relaxed(addr)	__raw_readb(addr)
-#define readw_relaxed(addr)	__raw_readw(addr)
-#define readl_relaxed(addr)	__raw_readl(addr)
-#define readq_relaxed(addr)	__raw_readq(addr)
-#define writeb_relaxed(b, addr)	__raw_writeb(b, addr)
-#define writew_relaxed(b, addr)	__raw_writew(b, addr)
-#define writel_relaxed(b, addr)	__raw_writel(b, addr)
-#define writeq_relaxed(b, addr)	__raw_writeq(b, addr)
+
+extern u8 readb_relaxed(const volatile void __iomem *addr);
+extern u16 readw_relaxed(const volatile void __iomem *addr);
+extern u32 readl_relaxed(const volatile void __iomem *addr);
+extern u64 readq_relaxed(const volatile void __iomem *addr);
+#define readb_relaxed readb_relaxed
+#define readw_relaxed readw_relaxed
+#define readl_relaxed readl_relaxed
+#define readq_relaxed readq_relaxed
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
+extern inline u8 readb_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readb(addr);
+}
+
+extern inline u16 readw_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readw(addr);
+}
+#endif
+
+#if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
+extern inline u32 readl_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readl(addr);
+}
+
+extern inline u64 readq_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readq(addr);
+}
+#endif
+
+#define writeb_relaxed	writeb
+#define writew_relaxed	writew
+#define writel_relaxed	writel
+#define writeq_relaxed	writeq
 
 /*
  * String version of IO memory access ops:
@@ -526,6 +612,10 @@ static inline void memsetw_io(volatile void __iomem *addr, u16 c, long len)
 	_memset_c_io(addr, 0x0001000100010001UL * c, len);
 }
 
+#define memset_io memset_io
+#define memcpy_fromio memcpy_fromio
+#define memcpy_toio memcpy_toio
+
 /*
  * String versions of in/out ops:
  */
@@ -536,45 +626,27 @@ extern void outsb (unsigned long port, const void *src, unsigned long count);
 extern void outsw (unsigned long port, const void *src, unsigned long count);
 extern void outsl (unsigned long port, const void *src, unsigned long count);
 
-/*
- * The Alpha Jensen hardware for some rather strange reason puts
- * the RTC clock at 0x170 instead of 0x70. Probably due to some
- * misguided idea about using 0x70 for NMI stuff.
- *
- * These defines will override the defaults when doing RTC queries
- */
+#define insb insb
+#define insw insw
+#define insl insl
+#define outsb outsb
+#define outsw outsw
+#define outsl outsl
 
-#ifdef CONFIG_ALPHA_GENERIC
-# define RTC_PORT(x)	((x) + alpha_mv.rtc_port)
-#else
-# ifdef CONFIG_ALPHA_JENSEN
-#  define RTC_PORT(x)	(0x170+(x))
-# else
-#  define RTC_PORT(x)	(0x70 + (x))
-# endif
-#endif
+#define RTC_PORT(x)	(0x70 + (x))
 #define RTC_ALWAYS_BCD	0
 
-/*
- * Some mucking forons use if[n]def writeq to check if platform has it.
- * It's a bloody bad idea and we probably want ARCH_HAS_WRITEQ for them
- * to play with; for now just use cpp anti-recursion logics and make sure
- * that damn thing is defined and expands to itself.
- */
-
-#define writeq writeq
-#define readq readq
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
+#define ioread64 ioread64
+#define iowrite64 iowrite64
+#define ioread8_rep ioread8_rep
+#define ioread16_rep ioread16_rep
+#define ioread32_rep ioread32_rep
+#define iowrite8_rep iowrite8_rep
+#define iowrite16_rep iowrite16_rep
+#define iowrite32_rep iowrite32_rep
+#define pci_iounmap pci_iounmap
+
+#include <asm-generic/io.h>
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/alpha/include/asm/io_trivial.h b/arch/alpha/include/asm/io_trivial.h
index ba3d8f0cfe0c..00032093bcfc 100644
--- a/arch/alpha/include/asm/io_trivial.h
+++ b/arch/alpha/include/asm/io_trivial.h
@@ -6,16 +6,16 @@
 /* This file may be included multiple times.  */
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_bw)
-__EXTERN_INLINE unsigned int
-IO_CONCAT(__IO_PREFIX,ioread8)(void __iomem *a)
+__EXTERN_INLINE u8
+IO_CONCAT(__IO_PREFIX,ioread8)(const void __iomem *a)
 {
-	return __kernel_ldbu(*(volatile u8 __force *)a);
+	return __kernel_ldbu(*(const volatile u8 __force *)a);
 }
 
-__EXTERN_INLINE unsigned int
-IO_CONCAT(__IO_PREFIX,ioread16)(void __iomem *a)
+__EXTERN_INLINE u16
+IO_CONCAT(__IO_PREFIX,ioread16)(const void __iomem *a)
 {
-	return __kernel_ldwu(*(volatile u16 __force *)a);
+	return __kernel_ldwu(*(const volatile u16 __force *)a);
 }
 
 __EXTERN_INLINE void
@@ -32,10 +32,10 @@ IO_CONCAT(__IO_PREFIX,iowrite16)(u16 b, void __iomem *a)
 #endif
 
 #if IO_CONCAT(__IO_PREFIX,trivial_io_lq)
-__EXTERN_INLINE unsigned int
-IO_CONCAT(__IO_PREFIX,ioread32)(void __iomem *a)
+__EXTERN_INLINE u32
+IO_CONCAT(__IO_PREFIX,ioread32)(const void __iomem *a)
 {
-	return *(volatile u32 __force *)a;
+	return *(const volatile u32 __force *)a;
 }
 
 __EXTERN_INLINE void
@@ -43,6 +43,18 @@ IO_CONCAT(__IO_PREFIX,iowrite32)(u32 b, void __iomem *a)
 {
 	*(volatile u32 __force *)a = b;
 }
+
+__EXTERN_INLINE u64
+IO_CONCAT(__IO_PREFIX,ioread64)(const void __iomem *a)
+{
+	return *(const volatile u64 __force *)a;
+}
+
+__EXTERN_INLINE void
+IO_CONCAT(__IO_PREFIX,iowrite64)(u64 b, void __iomem *a)
+{
+	*(volatile u64 __force *)a = b;
+}
 #endif
 
 #if IO_CONCAT(__IO_PREFIX,trivial_rw_bw) == 1
@@ -73,14 +85,14 @@ IO_CONCAT(__IO_PREFIX,writew)(u16 b, volatile void __iomem *a)
 __EXTERN_INLINE u8
 IO_CONCAT(__IO_PREFIX,readb)(const volatile void __iomem *a)
 {
-	void __iomem *addr = (void __iomem *)a;
+	const void __iomem *addr = (const void __iomem *)a;
 	return IO_CONCAT(__IO_PREFIX,ioread8)(addr);
 }
 
 __EXTERN_INLINE u16
 IO_CONCAT(__IO_PREFIX,readw)(const volatile void __iomem *a)
 {
-	void __iomem *addr = (void __iomem *)a;
+	const void __iomem *addr = (const void __iomem *)a;
 	return IO_CONCAT(__IO_PREFIX,ioread16)(addr);
 }
 
diff --git a/arch/alpha/include/asm/irq.h b/arch/alpha/include/asm/irq.h
index 432402c8e47f..d83b26b6660f 100644
--- a/arch/alpha/include/asm/irq.h
+++ b/arch/alpha/include/asm/irq.h
@@ -31,16 +31,11 @@
 #  define NR_IRQS      (32768 + 16)    /* marvel - 32 pids */
 # endif
 
-#elif defined(CONFIG_ALPHA_CABRIOLET) || \
-      defined(CONFIG_ALPHA_EB66P)     || \
-      defined(CONFIG_ALPHA_EB164)     || \
-      defined(CONFIG_ALPHA_PC164)     || \
+#elif defined(CONFIG_ALPHA_PC164)     || \
       defined(CONFIG_ALPHA_LX164)
 # define NR_IRQS	35
 
-#elif defined(CONFIG_ALPHA_EB66)      || \
-      defined(CONFIG_ALPHA_EB64P)     || \
-      defined(CONFIG_ALPHA_MIKASA)
+#elif defined(CONFIG_ALPHA_MIKASA)
 # define NR_IRQS	32
 
 #elif defined(CONFIG_ALPHA_ALCOR)     || \
@@ -55,7 +50,6 @@
 # define NR_IRQS	40
 
 #elif defined(CONFIG_ALPHA_DP264) || \
-      defined(CONFIG_ALPHA_LYNX)  || \
       defined(CONFIG_ALPHA_SHARK)
 # define NR_IRQS	64
 
diff --git a/arch/alpha/include/asm/irq_regs.h b/arch/alpha/include/asm/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/arch/alpha/include/asm/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/arch/alpha/include/asm/jensen.h b/arch/alpha/include/asm/jensen.h
deleted file mode 100644
index 436dc905b6ad..000000000000
--- a/arch/alpha/include/asm/jensen.h
+++ /dev/null
@@ -1,347 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ALPHA_JENSEN_H
-#define __ALPHA_JENSEN_H
-
-#include <asm/compiler.h>
-
-/*
- * Defines for the AlphaPC EISA IO and memory address space.
- */
-
-/*
- * NOTE! The memory operations do not set any memory barriers, as it's
- * not needed for cases like a frame buffer that is essentially memory-like.
- * You need to do them by hand if the operations depend on ordering.
- *
- * Similarly, the port IO operations do a "mb" only after a write operation:
- * if an mb is needed before (as in the case of doing memory mapped IO
- * first, and then a port IO operation to the same device), it needs to be
- * done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do the
- * mb all the time, but right now I'm hoping this will work out.  Avoiding
- * mb's may potentially be a noticeable speed improvement, but I can't
- * honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to non-interrupts
- * is another fun race area.  Don't do it (because if you do, I'll have to
- * do *everything* with interrupts disabled, ugh).
- */
-
-/*
- * EISA Interrupt Acknowledge address
- */
-#define EISA_INTA		(IDENT_ADDR + 0x100000000UL)
-
-/*
- * FEPROM addresses
- */
-#define EISA_FEPROM0		(IDENT_ADDR + 0x180000000UL)
-#define EISA_FEPROM1		(IDENT_ADDR + 0x1A0000000UL)
-
-/*
- * VL82C106 base address
- */
-#define EISA_VL82C106		(IDENT_ADDR + 0x1C0000000UL)
-
-/*
- * EISA "Host Address Extension" address (bits 25-31 of the EISA address)
- */
-#define EISA_HAE		(IDENT_ADDR + 0x1D0000000UL)
-
-/*
- * "SYSCTL" register address
- */
-#define EISA_SYSCTL		(IDENT_ADDR + 0x1E0000000UL)
-
-/*
- * "spare" register address
- */
-#define EISA_SPARE		(IDENT_ADDR + 0x1F0000000UL)
-
-/*
- * EISA memory address offset
- */
-#define EISA_MEM		(IDENT_ADDR + 0x200000000UL)
-
-/*
- * EISA IO address offset
- */
-#define EISA_IO			(IDENT_ADDR + 0x300000000UL)
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * Handle the "host address register". This needs to be set
- * to the high 7 bits of the EISA address.  This is also needed
- * for EISA IO addresses, which are only 16 bits wide (the
- * hae needs to be set to 0).
- *
- * HAE isn't needed for the local IO operations, though.
- */
-
-#define JENSEN_HAE_ADDRESS	EISA_HAE
-#define JENSEN_HAE_MASK		0x1ffffff
-
-__EXTERN_INLINE void jensen_set_hae(unsigned long addr)
-{
-	/* hae on the Jensen is bits 31:25 shifted right */
-	addr >>= 25;
-	if (addr != alpha_mv.hae_cache)
-		set_hae(addr);
-}
-
-#define vuip	volatile unsigned int *
-
-/*
- * IO functions
- *
- * The "local" functions are those that don't go out to the EISA bus,
- * but instead act on the VL82C106 chip directly.. This is mainly the
- * keyboard, RTC,  printer and first two serial lines..
- *
- * The local stuff makes for some complications, but it seems to be
- * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H
- * convinced that I need one of the newer machines.
- */
-
-static inline unsigned int jensen_local_inb(unsigned long addr)
-{
-	return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
-}
-
-static inline void jensen_local_outb(u8 b, unsigned long addr)
-{
-	*(vuip)((addr << 9) + EISA_VL82C106) = b;
-	mb();
-}
-
-static inline unsigned int jensen_bus_inb(unsigned long addr)
-{
-	long result;
-
-	jensen_set_hae(0);
-	result = *(volatile int *)((addr << 7) + EISA_IO + 0x00);
-	return __kernel_extbl(result, addr & 3);
-}
-
-static inline void jensen_bus_outb(u8 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;
-	mb();
-}
-
-/*
- * It seems gcc is not very good at optimizing away logical
- * operations that result in operations across inline functions.
- * Which is why this is a macro.
- */
-
-#define jensen_is_local(addr) ( \
-/* keyboard */	(addr == 0x60 || addr == 0x64) || \
-/* RTC */	(addr == 0x170 || addr == 0x171) || \
-/* mb COM2 */	(addr >= 0x2f8 && addr <= 0x2ff) || \
-/* mb LPT1 */	(addr >= 0x3bc && addr <= 0x3be) || \
-/* mb COM2 */	(addr >= 0x3f8 && addr <= 0x3ff))
-
-__EXTERN_INLINE u8 jensen_inb(unsigned long addr)
-{
-	if (jensen_is_local(addr))
-		return jensen_local_inb(addr);
-	else
-		return jensen_bus_inb(addr);
-}
-
-__EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr)
-{
-	if (jensen_is_local(addr))
-		jensen_local_outb(b, addr);
-	else
-		jensen_bus_outb(b, addr);
-}
-
-__EXTERN_INLINE u16 jensen_inw(unsigned long addr)
-{
-	long result;
-
-	jensen_set_hae(0);
-	result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20);
-	result >>= (addr & 3) * 8;
-	return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_inl(unsigned long addr)
-{
-	jensen_set_hae(0);
-	return *(vuip) ((addr << 7) + EISA_IO + 0x60);
-}
-
-__EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001;
-	mb();
-}
-
-__EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr)
-{
-	jensen_set_hae(0);
-	*(vuip) ((addr << 7) + EISA_IO + 0x60) = b;
-	mb();
-}
-
-/*
- * Memory functions.
- */
-
-__EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	long result;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00);
-	result >>= (addr & 3) * 8;
-	return 0xffUL & result;
-}
-
-__EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	long result;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20);
-	result >>= (addr & 3) * 8;
-	return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	return *(vuip) ((addr << 7) + EISA_MEM + 0x60);
-}
-
-__EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	unsigned long r0, r1;
-
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	addr = (addr << 7) + EISA_MEM + 0x60;
-	r0 = *(vuip) (addr);
-	r1 = *(vuip) (addr + (4 << 7));
-	return r1 << 32 | r0;
-}
-
-__EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101;
-}
-
-__EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001;
-}
-
-__EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	*(vuip) ((addr << 7) + EISA_MEM + 0x60) = b;
-}
-
-__EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr)
-{
-	unsigned long addr = (unsigned long) xaddr;
-	jensen_set_hae(addr);
-	addr &= JENSEN_HAE_MASK;
-	addr = (addr << 7) + EISA_MEM + 0x60;
-	*(vuip) (addr) = b;
-	*(vuip) (addr + (4 << 7)) = b >> 32;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr)
-{
-	return (void __iomem *)addr;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr,
-					     unsigned long size)
-{
-	return (void __iomem *)(addr + 0x100000000ul);
-}
-
-__EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr)
-{
-	return (long)addr >= 0;
-}
-
-__EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr)
-{
-	return (unsigned long)addr >= 0x100000000ul;
-}
-
-/* New-style ioread interface.  All the routines are so ugly for Jensen
-   that it doesn't make sense to merge them.  */
-
-#define IOPORT(OS, NS)							\
-__EXTERN_INLINE unsigned int jensen_ioread##NS(void __iomem *xaddr)	\
-{									\
-	if (jensen_is_mmio(xaddr))					\
-		return jensen_read##OS(xaddr - 0x100000000ul);		\
-	else								\
-		return jensen_in##OS((unsigned long)xaddr);		\
-}									\
-__EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr)	\
-{									\
-	if (jensen_is_mmio(xaddr))					\
-		jensen_write##OS(b, xaddr - 0x100000000ul);		\
-	else								\
-		jensen_out##OS(b, (unsigned long)xaddr);		\
-}
-
-IOPORT(b, 8)
-IOPORT(w, 16)
-IOPORT(l, 32)
-
-#undef IOPORT
-
-#undef vuip
-
-#undef __IO_PREFIX
-#define __IO_PREFIX		jensen
-#define jensen_trivial_rw_bw	0
-#define jensen_trivial_rw_lq	0
-#define jensen_trivial_io_bw	0
-#define jensen_trivial_io_lq	0
-#define jensen_trivial_iounmap	1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_JENSEN_H */
diff --git a/arch/alpha/include/asm/kdebug.h b/arch/alpha/include/asm/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/arch/alpha/include/asm/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/arch/alpha/include/asm/kmap_types.h b/arch/alpha/include/asm/kmap_types.h
deleted file mode 100644
index 651714b45729..000000000000
--- a/arch/alpha/include/asm/kmap_types.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
-/* Dummy header just to define km_type. */
-
-#ifdef CONFIG_DEBUG_HIGHMEM
-#define  __WITH_KM_FENCE
-#endif
-
-#include <asm-generic/kmap_types.h>
-
-#undef __WITH_KM_FENCE
-
-#endif
diff --git a/arch/alpha/include/asm/local.h b/arch/alpha/include/asm/local.h
index fab26a1c93d5..88eb398947a5 100644
--- a/arch/alpha/include/asm/local.h
+++ b/arch/alpha/include/asm/local.h
@@ -52,33 +52,40 @@ static __inline__ long local_sub_return(long i, local_t * l)
 	return result;
 }
 
-#define local_cmpxchg(l, o, n) \
-	(cmpxchg_local(&((l)->a.counter), (o), (n)))
+static __inline__ long local_cmpxchg(local_t *l, long old, long new)
+{
+	return cmpxchg_local(&l->a.counter, old, new);
+}
+
+static __inline__ bool local_try_cmpxchg(local_t *l, long *old, long new)
+{
+	return try_cmpxchg_local(&l->a.counter, (s64 *)old, new);
+}
+
 #define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
 
 /**
- * local_add_unless - add unless the number is a given value
+ * local_add_unless - add unless the number is already a given value
  * @l: pointer of type local_t
  * @a: the amount to add to l...
  * @u: ...unless l is equal to u.
  *
- * Atomically adds @a to @l, so long as it was not @u.
- * Returns non-zero if @l was not @u, and zero otherwise.
+ * Atomically adds @a to @l, if @v was not already @u.
+ * Returns true if the addition was done.
  */
-#define local_add_unless(l, a, u)				\
-({								\
-	long c, old;						\
-	c = local_read(l);					\
-	for (;;) {						\
-		if (unlikely(c == (u)))				\
-			break;					\
-		old = local_cmpxchg((l), c, c + (a));	\
-		if (likely(old == c))				\
-			break;					\
-		c = old;					\
-	}							\
-	c != (u);						\
-})
+static __inline__ bool
+local_add_unless(local_t *l, long a, long u)
+{
+	long c = local_read(l);
+
+	do {
+		if (unlikely(c == u))
+			return false;
+	} while (!local_try_cmpxchg(l, &c, c + a));
+
+	return true;
+}
+
 #define local_inc_not_zero(l) local_add_unless((l), 1, 0)
 
 #define local_add_negative(a, l) (local_add_return((a), (l)) < 0)
diff --git a/arch/alpha/include/asm/local64.h b/arch/alpha/include/asm/local64.h
deleted file mode 100644
index 36c93b5cc239..000000000000
--- a/arch/alpha/include/asm/local64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/local64.h>
diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h
index a6b73c6d10ee..490fc880bb3f 100644
--- a/arch/alpha/include/asm/machvec.h
+++ b/arch/alpha/include/asm/machvec.h
@@ -46,13 +46,15 @@ struct alpha_machine_vector
 	void (*mv_pci_tbi)(struct pci_controller *hose,
 			   dma_addr_t start, dma_addr_t end);
 
-	unsigned int (*mv_ioread8)(void __iomem *);
-	unsigned int (*mv_ioread16)(void __iomem *);
-	unsigned int (*mv_ioread32)(void __iomem *);
+	u8 (*mv_ioread8)(const void __iomem *);
+	u16 (*mv_ioread16)(const void __iomem *);
+	u32 (*mv_ioread32)(const void __iomem *);
+	u64 (*mv_ioread64)(const void __iomem *);
 
 	void (*mv_iowrite8)(u8, void __iomem *);
 	void (*mv_iowrite16)(u16, void __iomem *);
 	void (*mv_iowrite32)(u32, void __iomem *);
+	void (*mv_iowrite64)(u64, void __iomem *);
 
 	u8 (*mv_readb)(const volatile void __iomem *);
 	u16 (*mv_readw)(const volatile void __iomem *);
@@ -70,15 +72,6 @@ struct alpha_machine_vector
 	int (*mv_is_ioaddr)(unsigned long);
 	int (*mv_is_mmio)(const volatile void __iomem *);
 
-	void (*mv_switch_mm)(struct mm_struct *, struct mm_struct *,
-			     struct task_struct *);
-	void (*mv_activate_mm)(struct mm_struct *, struct mm_struct *);
-
-	void (*mv_flush_tlb_current)(struct mm_struct *);
-	void (*mv_flush_tlb_current_page)(struct mm_struct * mm,
-					  struct vm_area_struct *vma,
-					  unsigned long addr);
-
 	void (*update_irq_hw)(unsigned long, unsigned long, int);
 	void (*ack_irq)(unsigned long);
 	void (*device_interrupt)(unsigned long vector);
@@ -99,12 +92,6 @@ struct alpha_machine_vector
 
 	const char *vector_name;
 
-	/* NUMA information */
-	int (*pa_to_nid)(unsigned long);
-	int (*cpuid_to_nid)(int);
-	unsigned long (*node_mem_start)(int);
-	unsigned long (*node_mem_size)(int);
-
 	/* System specific parameters.  */
 	union {
 	    struct {
diff --git a/arch/alpha/include/asm/mmu_context.h b/arch/alpha/include/asm/mmu_context.h
index 6d7d9bc1b4b8..eee8fe836a59 100644
--- a/arch/alpha/include/asm/mmu_context.h
+++ b/arch/alpha/include/asm/mmu_context.h
@@ -71,9 +71,7 @@ __reload_thread(struct pcb_struct *pcb)
 #ifdef CONFIG_ALPHA_GENERIC
 # define MAX_ASN	(alpha_mv.max_asn)
 #else
-# ifdef CONFIG_ALPHA_EV4
-#  define MAX_ASN	EV4_MAX_ASN
-# elif defined(CONFIG_ALPHA_EV5)
+# if defined(CONFIG_ALPHA_EV56)
 #  define MAX_ASN	EV5_MAX_ASN
 # else
 #  define MAX_ASN	EV6_MAX_ASN
@@ -162,27 +160,9 @@ ev5_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
 	task_thread_info(next)->pcb.asn = mmc & HARDWARE_ASN_MASK;
 }
 
-__EXTERN_INLINE void
-ev4_switch_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm,
-	      struct task_struct *next)
-{
-	/* As described, ASN's are broken for TLB usage.  But we can
-	   optimize for switching between threads -- if the mm is
-	   unchanged from current we needn't flush.  */
-	/* ??? May not be needed because EV4 PALcode recognizes that
-	   ASN's are broken and does a tbiap itself on swpctx, under
-	   the "Must set ASN or flush" rule.  At least this is true
-	   for a 1992 SRM, reports Joseph Martin (jmartin@hlo.dec.com).
-	   I'm going to leave this here anyway, just to Be Sure.  -- r~  */
-	if (prev_mm != next_mm)
-		tbiap();
-
-	/* Do continue to allocate ASNs, because we can still use them
-	   to avoid flushing the icache.  */
-	ev5_switch_mm(prev_mm, next_mm, next);
-}
-
 extern void __load_new_mm_context(struct mm_struct *);
+asmlinkage void do_page_fault(unsigned long address, unsigned long mmcsr,
+			      long cause, struct pt_regs *regs);
 
 #ifdef CONFIG_SMP
 #define check_mmu_context()					\
@@ -207,28 +187,10 @@ ev5_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
 	__load_new_mm_context(next_mm);
 }
 
-__EXTERN_INLINE void
-ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm)
-{
-	__load_new_mm_context(next_mm);
-	tbiap();
-}
-
-#define deactivate_mm(tsk,mm)	do { } while (0)
-
-#ifdef CONFIG_ALPHA_GENERIC
-# define switch_mm(a,b,c)	alpha_mv.mv_switch_mm((a),(b),(c))
-# define activate_mm(x,y)	alpha_mv.mv_activate_mm((x),(y))
-#else
-# ifdef CONFIG_ALPHA_EV4
-#  define switch_mm(a,b,c)	ev4_switch_mm((a),(b),(c))
-#  define activate_mm(x,y)	ev4_activate_mm((x),(y))
-# else
-#  define switch_mm(a,b,c)	ev5_switch_mm((a),(b),(c))
-#  define activate_mm(x,y)	ev5_activate_mm((x),(y))
-# endif
-#endif
+#define switch_mm(a,b,c)	ev5_switch_mm((a),(b),(c))
+#define activate_mm(x,y)	ev5_activate_mm((x),(y))
 
+#define init_new_context init_new_context
 static inline int
 init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
@@ -242,12 +204,7 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 	return 0;
 }
 
-extern inline void
-destroy_context(struct mm_struct *mm)
-{
-	/* Nothing to do.  */
-}
-
+#define enter_lazy_tlb enter_lazy_tlb
 static inline void
 enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 {
@@ -255,6 +212,8 @@ enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 	  = ((unsigned long)mm->pgd - IDENT_ADDR) >> PAGE_SHIFT;
 }
 
+#include <asm-generic/mmu_context.h>
+
 #ifdef __MMU_EXTERN_INLINE
 #undef __EXTERN_INLINE
 #undef __MMU_EXTERN_INLINE
diff --git a/arch/alpha/include/asm/mmzone.h b/arch/alpha/include/asm/mmzone.h
deleted file mode 100644
index 889b5d3ad825..000000000000
--- a/arch/alpha/include/asm/mmzone.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
- * Adapted for the alpha wildfire architecture Jan 2001.
- */
-#ifndef _ASM_MMZONE_H_
-#define _ASM_MMZONE_H_
-
-#include <asm/smp.h>
-
-struct bootmem_data_t; /* stupid forward decl. */
-
-/*
- * Following are macros that are specific to this numa platform.
- */
-
-extern pg_data_t node_data[];
-
-#define alpha_pa_to_nid(pa)		\
-        (alpha_mv.pa_to_nid 		\
-	 ? alpha_mv.pa_to_nid(pa)	\
-	 : (0))
-#define node_mem_start(nid)		\
-        (alpha_mv.node_mem_start 	\
-	 ? alpha_mv.node_mem_start(nid) \
-	 : (0UL))
-#define node_mem_size(nid)		\
-        (alpha_mv.node_mem_size 	\
-	 ? alpha_mv.node_mem_size(nid) 	\
-	 : ((nid) ? (0UL) : (~0UL)))
-
-#define pa_to_nid(pa)		alpha_pa_to_nid(pa)
-#define NODE_DATA(nid)		(&node_data[(nid)])
-
-#define node_localnr(pfn, nid)	((pfn) - NODE_DATA(nid)->node_start_pfn)
-
-#if 1
-#define PLAT_NODE_DATA_LOCALNR(p, n)	\
-	(((p) >> PAGE_SHIFT) - PLAT_NODE_DATA(n)->gendata.node_start_pfn)
-#else
-static inline unsigned long
-PLAT_NODE_DATA_LOCALNR(unsigned long p, int n)
-{
-	unsigned long temp;
-	temp = p >> PAGE_SHIFT;
-	return temp - PLAT_NODE_DATA(n)->gendata.node_start_pfn;
-}
-#endif
-
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * Following are macros that each numa implementation must define.
- */
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define kvaddr_to_nid(kaddr)	pa_to_nid(__pa(kaddr))
-
-/*
- * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory
- * and returns the kaddr corresponding to first physical page in the
- * node's mem_map.
- */
-#define LOCAL_BASE_ADDR(kaddr)						  \
-    ((unsigned long)__va(NODE_DATA(kvaddr_to_nid(kaddr))->node_start_pfn  \
-			 << PAGE_SHIFT))
-
-/* XXX: FIXME -- nyc */
-#define kern_addr_valid(kaddr)	(0)
-
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-
-#define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> 32))
-#define pgd_page(pgd)		(pfn_to_page(pgd_val(pgd) >> 32))
-#define pte_pfn(pte)		(pte_val(pte) >> 32)
-
-#define mk_pte(page, pgprot)						     \
-({								 	     \
-	pte_t pte;                                                           \
-	unsigned long pfn;                                                   \
-									     \
-	pfn = page_to_pfn(page) << 32; \
-	pte_val(pte) = pfn | pgprot_val(pgprot);			     \
-									     \
-	pte;								     \
-})
-
-#define pte_page(x)							\
-({									\
-       	unsigned long kvirt;						\
-	struct page * __xx;						\
-									\
-	kvirt = (unsigned long)__va(pte_val(x) >> (32-PAGE_SHIFT));	\
-	__xx = virt_to_page(kvirt);					\
-									\
-	__xx;                                                           \
-})
-
-#define page_to_pa(page)						\
-	(page_to_pfn(page) << PAGE_SHIFT)
-
-#define pfn_to_nid(pfn)		pa_to_nid(((u64)(pfn) << PAGE_SHIFT))
-#define pfn_valid(pfn)							\
-	(((pfn) - node_start_pfn(pfn_to_nid(pfn))) <			\
-	 node_spanned_pages(pfn_to_nid(pfn)))					\
-
-#define virt_addr_valid(kaddr)	pfn_valid((__pa(kaddr) >> PAGE_SHIFT))
-
-#endif /* CONFIG_DISCONTIGMEM */
-
-#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/alpha/include/asm/page.h b/arch/alpha/include/asm/page.h
index f3fb2848470a..5ec4c77e432e 100644
--- a/arch/alpha/include/asm/page.h
+++ b/arch/alpha/include/asm/page.h
@@ -4,11 +4,7 @@
 
 #include <linux/const.h>
 #include <asm/pal.h>
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	13
-#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
+#include <vdso/page.h>
 
 #ifndef __ASSEMBLY__
 
@@ -17,9 +13,8 @@
 extern void clear_page(void *page);
 #define clear_user_page(page, vaddr, pg)	clear_page(page)
 
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
-	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vmaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+#define vma_alloc_zeroed_movable_folio(vma, vaddr) \
+	vma_alloc_folio(GFP_HIGHUSER_MOVABLE | __GFP_ZERO, 0, vma, vaddr)
 
 extern void copy_page(void * _to, void * _from);
 #define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
@@ -83,15 +78,9 @@ typedef struct page *pgtable_t;
 
 #define __pa(x)			((unsigned long) (x) - PAGE_OFFSET)
 #define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
-#ifndef CONFIG_DISCONTIGMEM
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 
-#define pfn_valid(pfn)		((pfn) < max_mapnr)
-#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-#endif /* CONFIG_DISCONTIGMEM */
-
-#define VM_DATA_DEFAULT_FLAGS		(VM_READ | VM_WRITE | VM_EXEC | \
-					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid((__pa(kaddr) >> PAGE_SHIFT))
 
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>
diff --git a/arch/alpha/include/asm/param.h b/arch/alpha/include/asm/param.h
deleted file mode 100644
index cfe947ce9461..000000000000
--- a/arch/alpha/include/asm/param.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_ALPHA_PARAM_H
-#define _ASM_ALPHA_PARAM_H
-
-#include <uapi/asm/param.h>
-
-# undef HZ
-# define HZ		CONFIG_HZ
-# define USER_HZ	1024
-# define CLOCKS_PER_SEC	USER_HZ	/* frequency at which times() counts */
-
-#endif /* _ASM_ALPHA_PARAM_H */
diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
index cf6bc1e64d66..6c04fcbdc8ed 100644
--- a/arch/alpha/include/asm/pci.h
+++ b/arch/alpha/include/asm/pci.h
@@ -56,12 +56,6 @@ struct pci_controller {
 
 /* IOMMU controls.  */
 
-/* TODO: integrate with include/asm-generic/pci.h ? */
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
-	return channel ? 15 : 14;
-}
-
 #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
 
 static inline int pci_proc_domain(struct pci_bus *bus)
@@ -94,7 +88,4 @@ extern void pci_adjust_legacy_attr(struct pci_bus *bus,
 				   enum pci_mmap_state mmap_type);
 #define HAVE_PCI_LEGACY	1
 
-extern int pci_create_resource_files(struct pci_dev *dev);
-extern void pci_remove_resource_files(struct pci_dev *dev);
-
 #endif /* __ALPHA_PCI_H */
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 6923249f2d49..4383d66341dc 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -9,10 +9,9 @@
  * way above 4G.
  *
  * Always use weak definitions for percpu variables in modules.
+ * Therefore, we have enabled CONFIG_ARCH_MODULE_NEEDS_WEAK_PER_CPU
+ * in the Kconfig.
  */
-#if defined(MODULE) && defined(CONFIG_SMP)
-#define ARCH_NEEDS_WEAK_PER_CPU
-#endif
 
 #include <asm-generic/percpu.h>
 
diff --git a/arch/alpha/include/asm/pgalloc.h b/arch/alpha/include/asm/pgalloc.h
index eb91f1e85629..68be7adbfe58 100644
--- a/arch/alpha/include/asm/pgalloc.h
+++ b/arch/alpha/include/asm/pgalloc.h
@@ -5,7 +5,7 @@
 #include <linux/mm.h>
 #include <linux/mmzone.h>
 
-#include <asm-generic/pgalloc.h>	/* for pte_{alloc,free}_one */
+#include <asm-generic/pgalloc.h>
 
 /*      
  * Allocate and free page tables. The xxx_kernel() versions are
@@ -18,7 +18,6 @@ pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte)
 {
 	pmd_set(pmd, (pte_t *)(page_to_pa(pte) + PAGE_OFFSET));
 }
-#define pmd_pgtable(pmd) pmd_page(pmd)
 
 static inline void
 pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
@@ -27,30 +26,11 @@ pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
 }
 
 static inline void
-pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
+pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 {
-	pgd_set(pgd, pmd);
+	pud_set(pud, pmd);
 }
 
 extern pgd_t *pgd_alloc(struct mm_struct *mm);
 
-static inline void
-pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	free_page((unsigned long)pgd);
-}
-
-static inline pmd_t *
-pmd_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	pmd_t *ret = (pmd_t *)__get_free_page(GFP_PGTABLE_USER);
-	return ret;
-}
-
-static inline void
-pmd_free(struct mm_struct *mm, pmd_t *pmd)
-{
-	free_page((unsigned long)pmd);
-}
-
 #endif /* _ALPHA_PGALLOC_H */
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 065b57f408c3..90e7a9539102 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -2,7 +2,7 @@
 #ifndef _ALPHA_PGTABLE_H
 #define _ALPHA_PGTABLE_H
 
-#include <asm-generic/4level-fixup.h>
+#include <asm-generic/pgtable-nopud.h>
 
 /*
  * This file contains the functions and defines necessary to modify and use
@@ -26,7 +26,6 @@ struct vm_area_struct;
  * hook is made available.
  */
 #define set_pte(pteptr, pteval) ((*(pteptr)) = (pteval))
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
 
 /* PMD_SHIFT determines the size of the area a second-level page table can map */
 #define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
@@ -46,7 +45,6 @@ struct vm_area_struct;
 #define PTRS_PER_PMD	(1UL << (PAGE_SHIFT-3))
 #define PTRS_PER_PGD	(1UL << (PAGE_SHIFT-3))
 #define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS	0UL
 
 /* Number of pointers that fit on a page:  this will go away. */
 #define PTRS_PER_PAGE	(1UL << (PAGE_SHIFT-3))
@@ -75,6 +73,9 @@ struct vm_area_struct;
 #define _PAGE_DIRTY	0x20000
 #define _PAGE_ACCESSED	0x40000
 
+/* We borrow bit 39 to store the exclusive marker in swap PTEs. */
+#define _PAGE_SWP_EXCLUSIVE	0x8000000000UL
+
 /*
  * NOTE! The "accessed" bit isn't necessarily exact:  it can be kept exactly
  * by software (use the KRE/URE/KWE/UWE bits appropriately), but I'll fake it.
@@ -106,7 +107,7 @@ struct vm_area_struct;
 
 #define _PAGE_NORMAL(x) __pgprot(_PAGE_VALID | __ACCESS_BITS | (x))
 
-#define _PAGE_P(x) _PAGE_NORMAL((x) | (((x) & _PAGE_FOW)?0:_PAGE_FOW))
+#define _PAGE_P(x) _PAGE_NORMAL((x) | _PAGE_FOW)
 #define _PAGE_S(x) _PAGE_NORMAL(x)
 
 /*
@@ -117,23 +118,6 @@ struct vm_area_struct;
  * arch/alpha/mm/fault.c)
  */
 	/* xwr */
-#define __P000	_PAGE_P(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
-#define __P001	_PAGE_P(_PAGE_FOE | _PAGE_FOW)
-#define __P010	_PAGE_P(_PAGE_FOE)
-#define __P011	_PAGE_P(_PAGE_FOE)
-#define __P100	_PAGE_P(_PAGE_FOW | _PAGE_FOR)
-#define __P101	_PAGE_P(_PAGE_FOW)
-#define __P110	_PAGE_P(0)
-#define __P111	_PAGE_P(0)
-
-#define __S000	_PAGE_S(_PAGE_FOE | _PAGE_FOW | _PAGE_FOR)
-#define __S001	_PAGE_S(_PAGE_FOE | _PAGE_FOW)
-#define __S010	_PAGE_S(_PAGE_FOE)
-#define __S011	_PAGE_S(_PAGE_FOE)
-#define __S100	_PAGE_S(_PAGE_FOW | _PAGE_FOR)
-#define __S101	_PAGE_S(_PAGE_FOW)
-#define __S110	_PAGE_S(0)
-#define __S111	_PAGE_S(0)
 
 /*
  * pgprot_noncached() is only for infiniband pci support, and a real
@@ -142,34 +126,11 @@ struct vm_area_struct;
 #define pgprot_noncached(prot)	(prot)
 
 /*
- * BAD_PAGETABLE is used when we need a bogus page-table, while
- * BAD_PAGE is used for a bogus page.
- *
  * ZERO_PAGE is a global shared page that is always zero:  used
  * for zero-mapped memory areas etc..
  */
-extern pte_t __bad_page(void);
-extern pmd_t * __bad_pagetable(void);
-
-extern unsigned long __zero_page(void);
-
-#define BAD_PAGETABLE	__bad_pagetable()
-#define BAD_PAGE	__bad_page()
 #define ZERO_PAGE(vaddr)	(virt_to_page(ZERO_PGE))
 
-/* number of bits that fit into a memory pointer */
-#define BITS_PER_PTR			(8*sizeof(unsigned long))
-
-/* to align the pointer to a pointer address */
-#define PTR_MASK			(~(sizeof(void*)-1))
-
-/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
-#define SIZEOF_PTR_LOG2			3
-
-/* to find an entry in a page-table */
-#define PAGE_PTR(address)		\
-  ((unsigned long)(address)>>(PAGE_SHIFT-SIZEOF_PTR_LOG2)&PTR_MASK&~PAGE_MASK)
-
 /*
  * On certain platforms whose physical address space can overlap KSEG,
  * namely EV6 and above, we must re-twiddle the physaddr to restore the
@@ -203,19 +164,11 @@ extern unsigned long __zero_page(void);
  * Conversion functions:  convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
  */
-#ifndef CONFIG_DISCONTIGMEM
-#define page_to_pa(page)	(((page) - mem_map) << PAGE_SHIFT)
+#define page_to_pa(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define PFN_PTE_SHIFT		32
+#define pte_pfn(pte)		(pte_val(pte) >> PFN_PTE_SHIFT)
 
-#define pte_pfn(pte)	(pte_val(pte) >> 32)
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
-#define mk_pte(page, pgprot)						\
-({									\
-	pte_t pte;							\
-									\
-	pte_val(pte) = (page_to_pfn(page) << 32) | pgprot_val(pgprot);	\
-	pte;								\
-})
-#endif
 
 extern inline pte_t pfn_pte(unsigned long physpfn, pgprot_t pgprot)
 { pte_t pte; pte_val(pte) = (PHYS_TWIDDLE(physpfn) << 32) | pgprot_val(pgprot); return pte; }
@@ -226,8 +179,8 @@ extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 extern inline void pmd_set(pmd_t * pmdp, pte_t * ptep)
 { pmd_val(*pmdp) = _PAGE_TABLE | ((((unsigned long) ptep) - PAGE_OFFSET) << (32-PAGE_SHIFT)); }
 
-extern inline void pgd_set(pgd_t * pgdp, pmd_t * pmdp)
-{ pgd_val(*pgdp) = _PAGE_TABLE | ((((unsigned long) pmdp) - PAGE_OFFSET) << (32-PAGE_SHIFT)); }
+extern inline void pud_set(pud_t * pudp, pmd_t * pmdp)
+{ pud_val(*pudp) = _PAGE_TABLE | ((((unsigned long) pmdp) - PAGE_OFFSET) << (32-PAGE_SHIFT)); }
 
 
 extern inline unsigned long
@@ -236,13 +189,14 @@ pmd_page_vaddr(pmd_t pmd)
 	return ((pmd_val(pmd) & _PFN_MASK) >> (32-PAGE_SHIFT)) + PAGE_OFFSET;
 }
 
-#ifndef CONFIG_DISCONTIGMEM
-#define pmd_page(pmd)	(mem_map + ((pmd_val(pmd) & _PFN_MASK) >> 32))
-#define pgd_page(pgd)	(mem_map + ((pgd_val(pgd) & _PFN_MASK) >> 32))
-#endif
+#define pmd_pfn(pmd)	(pmd_val(pmd) >> 32)
+#define pmd_page(pmd)	(pfn_to_page(pmd_val(pmd) >> 32))
+#define pud_page(pud)	(pfn_to_page(pud_val(pud) >> 32))
 
-extern inline unsigned long pgd_page_vaddr(pgd_t pgd)
-{ return PAGE_OFFSET + ((pgd_val(pgd) & _PFN_MASK) >> (32-PAGE_SHIFT)); }
+extern inline pmd_t *pud_pgtable(pud_t pgd)
+{
+	return (pmd_t *)(PAGE_OFFSET + ((pud_val(pgd) & _PFN_MASK) >> (32-PAGE_SHIFT)));
+}
 
 extern inline int pte_none(pte_t pte)		{ return !pte_val(pte); }
 extern inline int pte_present(pte_t pte)	{ return pte_val(pte) & _PAGE_VALID; }
@@ -256,10 +210,10 @@ extern inline int pmd_bad(pmd_t pmd)		{ return (pmd_val(pmd) & ~_PFN_MASK) != _P
 extern inline int pmd_present(pmd_t pmd)	{ return pmd_val(pmd) & _PAGE_VALID; }
 extern inline void pmd_clear(pmd_t * pmdp)	{ pmd_val(*pmdp) = 0; }
 
-extern inline int pgd_none(pgd_t pgd)		{ return !pgd_val(pgd); }
-extern inline int pgd_bad(pgd_t pgd)		{ return (pgd_val(pgd) & ~_PFN_MASK) != _PAGE_TABLE; }
-extern inline int pgd_present(pgd_t pgd)	{ return pgd_val(pgd) & _PAGE_VALID; }
-extern inline void pgd_clear(pgd_t * pgdp)	{ pgd_val(*pgdp) = 0; }
+extern inline int pud_none(pud_t pud)		{ return !pud_val(pud); }
+extern inline int pud_bad(pud_t pud)		{ return (pud_val(pud) & ~_PFN_MASK) != _PAGE_TABLE; }
+extern inline int pud_present(pud_t pud)	{ return pud_val(pud) & _PAGE_VALID; }
+extern inline void pud_clear(pud_t * pudp)	{ pud_val(*pudp) = 0; }
 
 /*
  * The following only work if pte_present() is true.
@@ -268,29 +222,18 @@ extern inline void pgd_clear(pgd_t * pgdp)	{ pgd_val(*pgdp) = 0; }
 extern inline int pte_write(pte_t pte)		{ return !(pte_val(pte) & _PAGE_FOW); }
 extern inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
 extern inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
-extern inline int pte_special(pte_t pte)	{ return 0; }
 
 extern inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) |= _PAGE_FOW; return pte; }
 extern inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~(__DIRTY_BITS); return pte; }
 extern inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~(__ACCESS_BITS); return pte; }
-extern inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) &= ~_PAGE_FOW; return pte; }
+extern inline pte_t pte_mkwrite_novma(pte_t pte){ pte_val(pte) &= ~_PAGE_FOW; return pte; }
 extern inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= __DIRTY_BITS; return pte; }
 extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= __ACCESS_BITS; return pte; }
-extern inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
-
-#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, (address))
-
-/* to find an entry in a page-table-directory. */
-#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
-#define pgd_offset(mm, address)	((mm)->pgd+pgd_index(address))
 
 /*
- * The smp_read_barrier_depends() in the following functions are required to
- * order the load of *dir (the pointer in the top level page table) with any
- * subsequent load of the returned pmd_t *ret (ret is data dependent on *dir).
+ * The smp_rmb() in the following functions are required to order the load of
+ * *dir (the pointer in the top level page table) with any subsequent load of
+ * the returned pmd_t *ret (ret is data dependent on *dir).
  *
  * If this ordering is not enforced, the CPU might load an older value of
  * *ret, which may be uninitialized data. See mm/memory.c:__pte_alloc for
@@ -301,24 +244,23 @@ extern inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
  */
 
 /* Find an entry in the second-level page table.. */
-extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
+extern inline pmd_t * pmd_offset(pud_t * dir, unsigned long address)
 {
-	pmd_t *ret = (pmd_t *) pgd_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
-	smp_read_barrier_depends(); /* see above */
+	pmd_t *ret = pud_pgtable(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
+	smp_rmb(); /* see above */
 	return ret;
 }
+#define pmd_offset pmd_offset
 
 /* Find an entry in the third-level page table.. */
 extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address)
 {
 	pte_t *ret = (pte_t *) pmd_page_vaddr(*dir)
 		+ ((address >> PAGE_SHIFT) & (PTRS_PER_PAGE - 1));
-	smp_read_barrier_depends(); /* see above */
+	smp_rmb(); /* see above */
 	return ret;
 }
-
-#define pte_offset_map(dir,addr)	pte_offset_kernel((dir),(addr))
-#define pte_unmap(pte)			do { } while (0)
+#define pte_offset_kernel pte_offset_kernel
 
 extern pgd_t swapper_pg_dir[1024];
 
@@ -331,22 +273,53 @@ extern inline void update_mmu_cache(struct vm_area_struct * vma,
 {
 }
 
+static inline void update_mmu_cache_range(struct vm_fault *vmf,
+		struct vm_area_struct *vma, unsigned long address,
+		pte_t *ptep, unsigned int nr)
+{
+}
+
 /*
- * Non-present pages:  high 24 bits are offset, next 8 bits type,
- * low 32 bits zero.
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * Format of swap PTEs:
+ *
+ *   6 6 6 6 5 5 5 5 5 5 5 5 5 5 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 3 3 3
+ *   3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2
+ *   <------------------- offset ------------------> E <--- type -->
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <--------------------------- zeroes -------------------------->
+ *
+ *   E is the exclusive marker that is not stored in swap entries.
  */
 extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
-{ pte_t pte; pte_val(pte) = (type << 32) | (offset << 40); return pte; }
+{ pte_t pte; pte_val(pte) = ((type & 0x7f) << 32) | (offset << 40); return pte; }
 
-#define __swp_type(x)		(((x).val >> 32) & 0xff)
+#define __swp_type(x)		(((x).val >> 32) & 0x7f)
 #define __swp_offset(x)		((x).val >> 40)
 #define __swp_entry(type, off)	((swp_entry_t) { pte_val(mk_swap_pte((type), (off))) })
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
-#ifndef CONFIG_DISCONTIGMEM
-#define kern_addr_valid(addr)	(1)
-#endif
+static inline bool pte_swp_exclusive(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
+}
+
+static inline pte_t pte_swp_mkexclusive(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_SWP_EXCLUSIVE;
+	return pte;
+}
+
+static inline pte_t pte_swp_clear_exclusive(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_SWP_EXCLUSIVE;
+	return pte;
+}
 
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
@@ -357,9 +330,7 @@ extern inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 
 extern void paging_init(void);
 
-#include <asm-generic/pgtable.h>
-
-/* We have our own get_unmapped_area to cope with ADDR_LIMIT_32BIT.  */
+/* We have our own get_unmapped_area */
 #define HAVE_ARCH_UNMAPPED_AREA
 
 #endif /* _ALPHA_PGTABLE_H */
diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h
index 6100431da07a..5dce5518a211 100644
--- a/arch/alpha/include/asm/processor.h
+++ b/arch/alpha/include/asm/processor.h
@@ -8,27 +8,19 @@
 #ifndef __ASM_ALPHA_PROCESSOR_H
 #define __ASM_ALPHA_PROCESSOR_H
 
-#include <linux/personality.h>	/* for ADDR_LIMIT_32BIT */
-
 /*
  * We have a 42-bit user address space: 4TB user VM...
  */
 #define TASK_SIZE (0x40000000000UL)
 
-#define STACK_TOP \
-  (current->personality & ADDR_LIMIT_32BIT ? 0x80000000 : 0x00120000000UL)
+#define STACK_TOP (0x00120000000UL)
 
 #define STACK_TOP_MAX	0x00120000000UL
 
 /* This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE \
-  ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
+#define TASK_UNMAPPED_BASE (TASK_SIZE / 2)
 
 /* This is dead.  Everything has been moved to thread_info.  */
 struct thread_struct { };
@@ -40,9 +32,7 @@ extern void start_thread(struct pt_regs *, unsigned long, unsigned long);
 
 /* Free all resources held by a thread. */
 struct task_struct;
-extern void release_thread(struct task_struct *);
-
-unsigned long get_wchan(struct task_struct *p);
+unsigned long __get_wchan(struct task_struct *p);
 
 #define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
 
@@ -53,12 +43,6 @@ unsigned long get_wchan(struct task_struct *p);
 
 #define ARCH_HAS_PREFETCH
 #define ARCH_HAS_PREFETCHW
-#define ARCH_HAS_SPINLOCK_PREFETCH
-
-#ifndef CONFIG_SMP
-/* Nothing to prefetch. */
-#define spin_lock_prefetch(lock)  	do { } while (0)
-#endif
 
 extern inline void prefetch(const void *ptr)  
 { 
@@ -70,11 +54,4 @@ extern inline void prefetchw(const void *ptr)
 	__builtin_prefetch(ptr, 1, 3);
 }
 
-#ifdef CONFIG_SMP
-extern inline void spin_lock_prefetch(const void *ptr)  
-{
-	__builtin_prefetch(ptr, 1, 3);
-}
-#endif
-
 #endif /* __ASM_ALPHA_PROCESSOR_H */
diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h
index df5f317ab3fc..3557ce64ed21 100644
--- a/arch/alpha/include/asm/ptrace.h
+++ b/arch/alpha/include/asm/ptrace.h
@@ -16,7 +16,6 @@
 
 #define current_pt_regs() \
   ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1)
-#define signal_pt_regs current_pt_regs
 
 #define force_successful_syscall_return() (current_pt_regs()->r0 = 0)
 
diff --git a/arch/alpha/include/asm/rwonce.h b/arch/alpha/include/asm/rwonce.h
new file mode 100644
index 000000000000..35542bcf92b3
--- /dev/null
+++ b/arch/alpha/include/asm/rwonce.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Google LLC.
+ */
+#ifndef __ASM_RWONCE_H
+#define __ASM_RWONCE_H
+
+#ifdef CONFIG_SMP
+
+#include <asm/barrier.h>
+
+/*
+ * Alpha is apparently daft enough to reorder address-dependent loads
+ * on some CPU implementations. Knock some common sense into it with
+ * a memory barrier in READ_ONCE().
+ *
+ * For the curious, more information about this unusual reordering is
+ * available in chapter 15 of the "perfbook":
+ *
+ *  https://kernel.org/pub/linux/kernel/people/paulmck/perfbook/perfbook.html
+ *
+ */
+#define __READ_ONCE(x)							\
+({									\
+	__unqual_scalar_typeof(x) __x =					\
+		(*(volatile typeof(__x) *)(&(x)));			\
+	mb();								\
+	(typeof(x))__x;							\
+})
+
+#endif /* CONFIG_SMP */
+
+#include <asm-generic/rwonce.h>
+
+#endif /* __ASM_RWONCE_H */
diff --git a/arch/alpha/include/asm/setup.h b/arch/alpha/include/asm/setup.h
new file mode 100644
index 000000000000..262aab99e391
--- /dev/null
+++ b/arch/alpha/include/asm/setup.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ALPHA_SETUP_H
+#define __ALPHA_SETUP_H
+
+#include <uapi/asm/setup.h>
+
+/*
+ * We leave one page for the initial stack page, and one page for
+ * the initial process structure. Also, the console eats 3 MB for
+ * the initial bootloader (one of which we can reclaim later).
+ */
+#define BOOT_PCB	0x20000000
+#define BOOT_ADDR	0x20000000
+/* Remove when official MILO sources have ELF support: */
+#define BOOT_SIZE	(16*1024)
+
+#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
+#define KERNEL_START_PHYS	0x300000 /* Old bootloaders hardcoded this.  */
+#else
+#define KERNEL_START_PHYS	0x1000000 /* required: Wildfire/Titan/Marvel */
+#endif
+
+#define KERNEL_START	(PAGE_OFFSET+KERNEL_START_PHYS)
+#define SWAPPER_PGD	KERNEL_START
+#define INIT_STACK	(PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
+#define EMPTY_PGT	(PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
+#define EMPTY_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
+#define ZERO_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
+
+#define START_ADDR	(PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
+
+/*
+ * This is setup by the secondary bootstrap loader.  Because
+ * the zero page is zeroed out as soon as the vm system is
+ * initialized, we need to copy things out into a more permanent
+ * place.
+ */
+#define PARAM			ZERO_PGE
+#define COMMAND_LINE		((char *)(absolute_pointer(PARAM + 0x0000)))
+#define INITRD_START		(*(unsigned long *) (PARAM+0x100))
+#define INITRD_SIZE		(*(unsigned long *) (PARAM+0x108))
+
+#endif
diff --git a/arch/alpha/include/asm/sparsemem.h b/arch/alpha/include/asm/sparsemem.h
new file mode 100644
index 000000000000..a0820fd2d4b1
--- /dev/null
+++ b/arch/alpha/include/asm/sparsemem.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ALPHA_SPARSEMEM_H
+#define _ASM_ALPHA_SPARSEMEM_H
+
+#ifdef CONFIG_SPARSEMEM
+
+#define SECTION_SIZE_BITS	27
+
+/*
+ * According to "Alpha Architecture Reference Manual" physical
+ * addresses are at most 48 bits.
+ * https://download.majix.org/dec/alpha_arch_ref.pdf
+ */
+#define MAX_PHYSMEM_BITS	48
+
+#endif /* CONFIG_SPARSEMEM */
+
+#endif /* _ASM_ALPHA_SPARSEMEM_H */
diff --git a/arch/alpha/include/asm/special_insns.h b/arch/alpha/include/asm/special_insns.h
index ca2c5c30b22e..798d0bdb11f9 100644
--- a/arch/alpha/include/asm/special_insns.h
+++ b/arch/alpha/include/asm/special_insns.h
@@ -15,10 +15,7 @@ enum implver_enum {
    (enum implver_enum) __implver; })
 #else
 /* Try to eliminate some dead code.  */
-#ifdef CONFIG_ALPHA_EV4
-#define implver() IMPLVER_EV4
-#endif
-#ifdef CONFIG_ALPHA_EV5
+#ifdef CONFIG_ALPHA_EV56
 #define implver() IMPLVER_EV5
 #endif
 #if defined(CONFIG_ALPHA_EV6)
diff --git a/arch/alpha/include/asm/spinlock_types.h b/arch/alpha/include/asm/spinlock_types.h
index 1d5716bc060b..05a444d77c53 100644
--- a/arch/alpha/include/asm/spinlock_types.h
+++ b/arch/alpha/include/asm/spinlock_types.h
@@ -2,8 +2,8 @@
 #ifndef _ALPHA_SPINLOCK_TYPES_H
 #define _ALPHA_SPINLOCK_TYPES_H
 
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
+#ifndef __LINUX_SPINLOCK_TYPES_RAW_H
+# error "Please do not include this file directly."
 #endif
 
 typedef struct {
diff --git a/arch/alpha/include/asm/syscall.h b/arch/alpha/include/asm/syscall.h
index 11c688c1d7ec..f21babaeed85 100644
--- a/arch/alpha/include/asm/syscall.h
+++ b/arch/alpha/include/asm/syscall.h
@@ -9,4 +9,10 @@ static inline int syscall_get_arch(struct task_struct *task)
 	return AUDIT_ARCH_ALPHA;
 }
 
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->r0;
+}
+
 #endif	/* _ASM_ALPHA_SYSCALL_H */
diff --git a/arch/alpha/include/asm/termios.h b/arch/alpha/include/asm/termios.h
deleted file mode 100644
index b7c77bb1bfd2..000000000000
--- a/arch/alpha/include/asm/termios.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ALPHA_TERMIOS_H
-#define _ALPHA_TERMIOS_H
-
-#include <uapi/asm/termios.h>
-
-/*	eof=^D		eol=\0		eol2=\0		erase=del
-	werase=^W	kill=^U		reprint=^R	sxtc=\0
-	intr=^C		quit=^\		susp=^Z		<OSF/1 VDSUSP>
-	start=^Q	stop=^S		lnext=^V	discard=^U
-	vmin=\1		vtime=\0
-*/
-#define INIT_C_CC "\004\000\000\177\027\025\022\000\003\034\032\000\021\023\026\025\001\000"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-
-#define user_termio_to_kernel_termios(a_termios, u_termio)			\
-({										\
-	struct ktermios *k_termios = (a_termios);				\
-	struct termio k_termio;							\
-	int canon, ret;								\
-										\
-	ret = copy_from_user(&k_termio, u_termio, sizeof(k_termio));		\
-	if (!ret) {								\
-		/* Overwrite only the low bits.  */				\
-		*(unsigned short *)&k_termios->c_iflag = k_termio.c_iflag;	\
-		*(unsigned short *)&k_termios->c_oflag = k_termio.c_oflag;	\
-		*(unsigned short *)&k_termios->c_cflag = k_termio.c_cflag;	\
-		*(unsigned short *)&k_termios->c_lflag = k_termio.c_lflag;	\
-		canon = k_termio.c_lflag & ICANON;				\
-										\
-		k_termios->c_cc[VINTR]  = k_termio.c_cc[_VINTR];		\
-		k_termios->c_cc[VQUIT]  = k_termio.c_cc[_VQUIT];		\
-		k_termios->c_cc[VERASE] = k_termio.c_cc[_VERASE];		\
-		k_termios->c_cc[VKILL]  = k_termio.c_cc[_VKILL];		\
-		k_termios->c_cc[VEOL2]  = k_termio.c_cc[_VEOL2];		\
-		k_termios->c_cc[VSWTC]  = k_termio.c_cc[_VSWTC];		\
-		k_termios->c_cc[canon ? VEOF : VMIN]  = k_termio.c_cc[_VEOF];	\
-		k_termios->c_cc[canon ? VEOL : VTIME] = k_termio.c_cc[_VEOL];	\
-	}									\
-	ret;									\
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- *
- * Note the "fun" _VMIN overloading.
- */
-#define kernel_termios_to_user_termio(u_termio, a_termios)		\
-({									\
-	struct ktermios *k_termios = (a_termios);			\
-	struct termio k_termio;						\
-	int canon;							\
-									\
-	k_termio.c_iflag = k_termios->c_iflag;				\
-	k_termio.c_oflag = k_termios->c_oflag;				\
-	k_termio.c_cflag = k_termios->c_cflag;				\
-	canon = (k_termio.c_lflag = k_termios->c_lflag) & ICANON;	\
-									\
-	k_termio.c_line = k_termios->c_line;				\
-	k_termio.c_cc[_VINTR]  = k_termios->c_cc[VINTR];		\
-	k_termio.c_cc[_VQUIT]  = k_termios->c_cc[VQUIT];		\
-	k_termio.c_cc[_VERASE] = k_termios->c_cc[VERASE];		\
-	k_termio.c_cc[_VKILL]  = k_termios->c_cc[VKILL];		\
-	k_termio.c_cc[_VEOF]   = k_termios->c_cc[canon ? VEOF : VMIN];	\
-	k_termio.c_cc[_VEOL]   = k_termios->c_cc[canon ? VEOL : VTIME];	\
-	k_termio.c_cc[_VEOL2]  = k_termios->c_cc[VEOL2];		\
-	k_termio.c_cc[_VSWTC]  = k_termios->c_cc[VSWTC];		\
-									\
-	copy_to_user(u_termio, &k_termio, sizeof(k_termio));		\
-})
-
-#define user_termios_to_kernel_termios(k, u) \
-	copy_from_user(k, u, sizeof(struct termios2))
-
-#define kernel_termios_to_user_termios(u, k) \
-	copy_to_user(u, k, sizeof(struct termios2))
-
-#define user_termios_to_kernel_termios_1(k, u) \
-	copy_from_user(k, u, sizeof(struct termios))
-
-#define kernel_termios_to_user_termios_1(u, k) \
-	copy_to_user(u, k, sizeof(struct termios))
-
-#endif	/* _ALPHA_TERMIOS_H */
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 807d7b9a1860..4a4d00b37986 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -19,7 +19,6 @@ struct thread_info {
 	unsigned int		flags;		/* low level flags */
 	unsigned int		ieee_state;	/* see fpu.h */
 
-	mm_segment_t		addr_limit;	/* thread address space */
 	unsigned		cpu;		/* current CPU */
 	int			preempt_count; /* 0 => preemptable, <0 => BUG */
 	unsigned int		status;		/* thread-synchronous flags */
@@ -27,6 +26,7 @@ struct thread_info {
 	int bpt_nsaved;
 	unsigned long bpt_addr[2];		/* breakpoint handling  */
 	unsigned int bpt_insn[2];
+	unsigned long fp[32];
 };
 
 /*
@@ -35,7 +35,6 @@ struct thread_info {
 #define INIT_THREAD_INFO(tsk)			\
 {						\
 	.task		= &tsk,			\
-	.addr_limit	= KERNEL_DS,		\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
 }
 
@@ -43,6 +42,8 @@ struct thread_info {
 register struct thread_info *__current_thread_info __asm__("$8");
 #define current_thread_info()  __current_thread_info
 
+register unsigned long *current_stack_pointer __asm__ ("$30");
+
 #endif /* __ASSEMBLY__ */
 
 /* Thread information allocation.  */
@@ -62,6 +63,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_SYSCALL_AUDIT	4	/* syscall audit active */
+#define TIF_NOTIFY_SIGNAL	5	/* signal notifications exist */
 #define TIF_DIE_IF_KERNEL	9	/* dik recursion lock */
 #define TIF_MEMDIE		13	/* is terminating due to OOM killer */
 #define TIF_POLLING_NRFLAG	14	/* idle is polling for TIF_NEED_RESCHED */
@@ -71,20 +73,20 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_NOTIFY_SIGNAL	(1<<TIF_NOTIFY_SIGNAL)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 
 /* Work to do on interrupt/exception return.  */
 #define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
-				 _TIF_NOTIFY_RESUME)
-
-/* Work to do on any return to userspace.  */
-#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
-				 | _TIF_SYSCALL_TRACE)
+				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
 
 #define TS_UAC_NOPRINT		0x0001	/* ! Preserve the following three */
 #define TS_UAC_NOFIX		0x0002	/* ! flags as they match          */
 #define TS_UAC_SIGBUS		0x0004	/* ! userspace part of 'osf_sysinfo' */
 
+#define TS_SAVED_FP		0x0008
+#define TS_RESTORE_FP		0x0010
+
 #define SET_UNALIGN_CTL(task,value)	({				\
 	__u32 status = task_thread_info(task)->status & ~UAC_BITMASK;	\
 	if (value & PR_UNALIGN_NOPRINT)					\
@@ -108,5 +110,17 @@ register struct thread_info *__current_thread_info __asm__("$8");
 	put_user(res, (int __user *)(value));				\
 	})
 
+#ifndef __ASSEMBLY__
+extern void __save_fpu(void);
+
+static inline void save_fpu(void)
+{
+	if (!(current_thread_info()->status & TS_SAVED_FP)) {
+		current_thread_info()->status |= TS_SAVED_FP;
+		__save_fpu();
+	}
+}
+#endif
+
 #endif /* __KERNEL__ */
 #endif /* _ALPHA_THREAD_INFO_H */
diff --git a/arch/alpha/include/asm/timex.h b/arch/alpha/include/asm/timex.h
index b565cc6f408e..f89798da8a14 100644
--- a/arch/alpha/include/asm/timex.h
+++ b/arch/alpha/include/asm/timex.h
@@ -28,5 +28,6 @@ static inline cycles_t get_cycles (void)
 	__asm__ __volatile__ ("rpcc %0" : "=r"(ret));
 	return ret;
 }
+#define get_cycles get_cycles
 
 #endif
diff --git a/arch/alpha/include/asm/tlbflush.h b/arch/alpha/include/asm/tlbflush.h
index f8b492408f51..ba4b359d6c39 100644
--- a/arch/alpha/include/asm/tlbflush.h
+++ b/arch/alpha/include/asm/tlbflush.h
@@ -5,7 +5,6 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <asm/compiler.h>
-#include <asm/pgalloc.h>
 
 #ifndef __EXTERN_INLINE
 #define __EXTERN_INLINE extern inline
@@ -15,16 +14,6 @@
 extern void __load_new_mm_context(struct mm_struct *);
 
 
-/* Use a few helper functions to hide the ugly broken ASN
-   numbers on early Alphas (ev4 and ev45).  */
-
-__EXTERN_INLINE void
-ev4_flush_tlb_current(struct mm_struct *mm)
-{
-	__load_new_mm_context(mm);
-	tbiap();
-}
-
 __EXTERN_INLINE void
 ev5_flush_tlb_current(struct mm_struct *mm)
 {
@@ -36,19 +25,6 @@ ev5_flush_tlb_current(struct mm_struct *mm)
    specific icache page.  */
 
 __EXTERN_INLINE void
-ev4_flush_tlb_current_page(struct mm_struct * mm,
-			   struct vm_area_struct *vma,
-			   unsigned long addr)
-{
-	int tbi_flag = 2;
-	if (vma->vm_flags & VM_EXEC) {
-		__load_new_mm_context(mm);
-		tbi_flag = 3;
-	}
-	tbi(tbi_flag, addr);
-}
-
-__EXTERN_INLINE void
 ev5_flush_tlb_current_page(struct mm_struct * mm,
 			   struct vm_area_struct *vma,
 			   unsigned long addr)
@@ -60,18 +36,8 @@ ev5_flush_tlb_current_page(struct mm_struct * mm,
 }
 
 
-#ifdef CONFIG_ALPHA_GENERIC
-# define flush_tlb_current		alpha_mv.mv_flush_tlb_current
-# define flush_tlb_current_page		alpha_mv.mv_flush_tlb_current_page
-#else
-# ifdef CONFIG_ALPHA_EV4
-#  define flush_tlb_current		ev4_flush_tlb_current
-#  define flush_tlb_current_page	ev4_flush_tlb_current_page
-# else
-#  define flush_tlb_current		ev5_flush_tlb_current
-#  define flush_tlb_current_page	ev5_flush_tlb_current_page
-# endif
-#endif
+#define flush_tlb_current	ev5_flush_tlb_current
+#define flush_tlb_current_page	ev5_flush_tlb_current_page
 
 #ifdef __MMU_EXTERN_INLINE
 #undef __EXTERN_INLINE
diff --git a/arch/alpha/include/asm/topology.h b/arch/alpha/include/asm/topology.h
index 5a77a40567fa..7d393036aa8f 100644
--- a/arch/alpha/include/asm/topology.h
+++ b/arch/alpha/include/asm/topology.h
@@ -7,45 +7,6 @@
 #include <linux/numa.h>
 #include <asm/machvec.h>
 
-#ifdef CONFIG_NUMA
-static inline int cpu_to_node(int cpu)
-{
-	int node;
-	
-	if (!alpha_mv.cpuid_to_nid)
-		return 0;
-
-	node = alpha_mv.cpuid_to_nid(cpu);
-
-#ifdef DEBUG_NUMA
-	BUG_ON(node < 0);
-#endif
-
-	return node;
-}
-
-extern struct cpumask node_to_cpumask_map[];
-/* FIXME: This is dumb, recalculating every time.  But simple. */
-static const struct cpumask *cpumask_of_node(int node)
-{
-	int cpu;
-
-	if (node == NUMA_NO_NODE)
-		return cpu_all_mask;
-
-	cpumask_clear(&node_to_cpumask_map[node]);
-
-	for_each_online_cpu(cpu) {
-		if (cpu_to_node(cpu) == node)
-			cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
-	}
-
-	return &node_to_cpumask_map[node];
-}
-
-#define cpumask_of_pcibus(bus)	(cpu_online_mask)
-
-#endif /* !CONFIG_NUMA */
 # include <asm-generic/topology.h>
 
 #endif /* _ASM_ALPHA_TOPOLOGY_H */
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index 1fe2b56cb861..ef295cbb797c 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -2,47 +2,7 @@
 #ifndef __ALPHA_UACCESS_H
 #define __ALPHA_UACCESS_H
 
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * Or at least it did once upon a time.  Nowadays it is a mask that
- * defines which bits of the address space are off limits.  This is a
- * wee bit faster than the above.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define KERNEL_DS	((mm_segment_t) { 0UL })
-#define USER_DS		((mm_segment_t) { -0x40000000000UL })
-
-#define get_fs()  (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a, b)	((a).seg == (b).seg)
-
-/*
- * Is a address valid? This does a straightforward calculation rather
- * than tests.
- *
- * Address valid if:
- *  - "addr" doesn't have any high-bits set
- *  - AND "size" doesn't have any high-bits set
- *  - AND "addr+size-(size != 0)" doesn't have any high-bits set
- *  - OR we are in kernel mode.
- */
-#define __access_ok(addr, size) ({				\
-	unsigned long __ao_a = (addr), __ao_b = (size);		\
-	unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b;	\
-	(get_fs().seg & (__ao_a | __ao_b | __ao_end)) == 0; })
-
-#define access_ok(addr, size)				\
-({							\
-	__chk_user_ptr(addr);				\
-	__access_ok(((unsigned long)(addr)), (size));	\
-})
-
+#include <asm-generic/access_ok.h>
 /*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
@@ -105,7 +65,7 @@ extern void __get_user_unknown(void);
 	long __gu_err = -EFAULT;				\
 	unsigned long __gu_val = 0;				\
 	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	if (__access_ok((unsigned long)__gu_addr, size)) {	\
+	if (__access_ok(__gu_addr, size)) {			\
 		__gu_err = 0;					\
 		switch (size) {					\
 		  case 1: __get_user_8(__gu_addr); break;	\
@@ -136,9 +96,6 @@ struct __large_struct { unsigned long buf[100]; };
 		: "=r"(__gu_val), "=r"(__gu_err)	\
 		: "m"(__m(addr)), "1"(__gu_err))
 
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
-
 #define __get_user_16(addr)				\
 	__asm__("1: ldwu %0,%2\n"			\
 	"2:\n"						\
@@ -152,33 +109,6 @@ struct __large_struct { unsigned long buf[100]; };
 	EXC(1b,2b,%0,%1)				\
 		: "=r"(__gu_val), "=r"(__gu_err)	\
 		: "m"(__m(addr)), "1"(__gu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
-   load, so we have to do a general unaligned operation.  */
-
-#define __get_user_16(addr)						\
-{									\
-	long __gu_tmp;							\
-	__asm__("1: ldq_u %0,0(%3)\n"					\
-	"2:	ldq_u %1,1(%3)\n"					\
-	"	extwl %0,%3,%0\n"					\
-	"	extwh %1,%3,%1\n"					\
-	"	or %0,%1,%0\n"						\
-	"3:\n"								\
-	EXC(1b,3b,%0,%2)						\
-	EXC(2b,3b,%0,%2)						\
-		: "=&r"(__gu_val), "=&r"(__gu_tmp), "=r"(__gu_err)	\
-		: "r"(addr), "2"(__gu_err));				\
-}
-
-#define __get_user_8(addr)						\
-	__asm__("1: ldq_u %0,0(%2)\n"					\
-	"	extbl %0,%2,%0\n"					\
-	"2:\n"								\
-	EXC(1b,2b,%0,%1)						\
-		: "=&r"(__gu_val), "=r"(__gu_err)			\
-		: "r"(addr), "1"(__gu_err))
-#endif
 
 extern void __put_user_unknown(void);
 
@@ -200,7 +130,7 @@ extern void __put_user_unknown(void);
 ({								\
 	long __pu_err = -EFAULT;				\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	if (__access_ok((unsigned long)__pu_addr, size)) {	\
+	if (__access_ok(__pu_addr, size)) {			\
 		__pu_err = 0;					\
 		switch (size) {					\
 		  case 1: __put_user_8(x, __pu_addr); break;	\
@@ -232,9 +162,6 @@ __asm__ __volatile__("1: stl %r2,%1\n"				\
 		: "=r"(__pu_err)				\
 		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
 
-#ifdef __alpha_bwx__
-/* Those lucky bastards with ev56 and later CPUs can do byte/word moves.  */
-
 #define __put_user_16(x, addr)					\
 __asm__ __volatile__("1: stw %r2,%1\n"				\
 	"2:\n"							\
@@ -248,53 +175,6 @@ __asm__ __volatile__("1: stb %r2,%1\n"				\
 	EXC(1b,2b,$31,%0)					\
 		: "=r"(__pu_err)				\
 		: "m"(__m(addr)), "rJ"(x), "0"(__pu_err))
-#else
-/* Unfortunately, we can't get an unaligned access trap for the sub-word
-   write, so we have to do a general unaligned operation.  */
-
-#define __put_user_16(x, addr)					\
-{								\
-	long __pu_tmp1, __pu_tmp2, __pu_tmp3, __pu_tmp4;	\
-	__asm__ __volatile__(					\
-	"1:	ldq_u %2,1(%5)\n"				\
-	"2:	ldq_u %1,0(%5)\n"				\
-	"	inswh %6,%5,%4\n"				\
-	"	inswl %6,%5,%3\n"				\
-	"	mskwh %2,%5,%2\n"				\
-	"	mskwl %1,%5,%1\n"				\
-	"	or %2,%4,%2\n"					\
-	"	or %1,%3,%1\n"					\
-	"3:	stq_u %2,1(%5)\n"				\
-	"4:	stq_u %1,0(%5)\n"				\
-	"5:\n"							\
-	EXC(1b,5b,$31,%0)					\
-	EXC(2b,5b,$31,%0)					\
-	EXC(3b,5b,$31,%0)					\
-	EXC(4b,5b,$31,%0)					\
-		: "=r"(__pu_err), "=&r"(__pu_tmp1), 		\
-		  "=&r"(__pu_tmp2), "=&r"(__pu_tmp3), 		\
-		  "=&r"(__pu_tmp4)				\
-		: "r"(addr), "r"((unsigned long)(x)), "0"(__pu_err)); \
-}
-
-#define __put_user_8(x, addr)					\
-{								\
-	long __pu_tmp1, __pu_tmp2;				\
-	__asm__ __volatile__(					\
-	"1:	ldq_u %1,0(%4)\n"				\
-	"	insbl %3,%4,%2\n"				\
-	"	mskbl %1,%4,%1\n"				\
-	"	or %1,%2,%1\n"					\
-	"2:	stq_u %1,0(%4)\n"				\
-	"3:\n"							\
-	EXC(1b,3b,$31,%0)					\
-	EXC(2b,3b,$31,%0)					\
-		: "=r"(__pu_err), 				\
-	  	  "=&r"(__pu_tmp1), "=&r"(__pu_tmp2)		\
-		: "r"((unsigned long)(x)), "r"(addr), "0"(__pu_err)); \
-}
-#endif
-
 
 /*
  * Complex access routines
@@ -316,17 +196,14 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long len)
 
 extern long __clear_user(void __user *to, long len);
 
-extern inline long
+static inline long
 clear_user(void __user *to, long len)
 {
-	if (__access_ok((unsigned long)to, len))
+	if (__access_ok(to, len))
 		len = __clear_user(to, len);
 	return len;
 }
 
-#define user_addr_max() \
-        (uaccess_kernel() ? ~0UL : TASK_SIZE)
-
 extern long strncpy_from_user(char *dest, const char __user *src, long count);
 extern __must_check long strnlen_user(const char __user *str, long n);
 
diff --git a/arch/alpha/include/asm/unaligned.h b/arch/alpha/include/asm/unaligned.h
deleted file mode 100644
index 863c807b66f8..000000000000
--- a/arch/alpha/include/asm/unaligned.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_ALPHA_UNALIGNED_H
-#define _ASM_ALPHA_UNALIGNED_H
-
-#include <linux/unaligned/le_struct.h>
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_le
-#define put_unaligned __put_unaligned_le
-
-#endif /* _ASM_ALPHA_UNALIGNED_H */
diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 986f5da9b7d8..caabd92ea709 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -4,7 +4,7 @@
 
 #include <uapi/asm/unistd.h>
 
-#define NR_SYSCALLS	__NR_syscalls
+#define NR_syscalls	__NR_syscalls
 
 #define __ARCH_WANT_NEW_STAT
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/alpha/include/asm/user.h b/arch/alpha/include/asm/user.h
index 3df37492c7b7..c9f525a6aab8 100644
--- a/arch/alpha/include/asm/user.h
+++ b/arch/alpha/include/asm/user.h
@@ -45,10 +45,4 @@ struct user {
 	char		u_comm[32];		/* user command name */
 };
 
-#define NBPG			PAGE_SIZE
-#define UPAGES			1
-#define HOST_TEXT_START_ADDR	(u.start_code)
-#define HOST_DATA_START_ADDR	(u.start_data)
-#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
-
 #endif /* _ALPHA_USER_H */
diff --git a/arch/alpha/include/asm/vga.h b/arch/alpha/include/asm/vga.h
index 4c347a8454c7..919931cb5b63 100644
--- a/arch/alpha/include/asm/vga.h
+++ b/arch/alpha/include/asm/vga.h
@@ -13,6 +13,7 @@
 #define VT_BUF_HAVE_RW
 #define VT_BUF_HAVE_MEMSETW
 #define VT_BUF_HAVE_MEMCPYW
+#define VT_BUF_HAVE_MEMMOVEW
 
 static inline void scr_writew(u16 val, volatile u16 *addr)
 {
@@ -40,6 +41,7 @@ static inline void scr_memsetw(u16 *s, u16 c, unsigned int count)
 
 /* Do not trust that the usage will be correct; analyze the arguments.  */
 extern void scr_memcpyw(u16 *d, const u16 *s, unsigned int count);
+extern void scr_memmovew(u16 *d, const u16 *s, unsigned int count);
 
 /* ??? These are currently only used for downloading character sets.  As
    such, they don't need memory barriers.  Is this all they are intended
diff --git a/arch/alpha/include/asm/vmalloc.h b/arch/alpha/include/asm/vmalloc.h
new file mode 100644
index 000000000000..0a9a366a4d34
--- /dev/null
+++ b/arch/alpha/include/asm/vmalloc.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_ALPHA_VMALLOC_H
+#define _ASM_ALPHA_VMALLOC_H
+
+#endif /* _ASM_ALPHA_VMALLOC_H */
diff --git a/arch/alpha/include/asm/xchg.h b/arch/alpha/include/asm/xchg.h
deleted file mode 100644
index 7adb80c6746a..000000000000
--- a/arch/alpha/include/asm/xchg.h
+++ /dev/null
@@ -1,246 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ALPHA_CMPXCHG_H
-#error Do not include xchg.h directly!
-#else
-/*
- * xchg/xchg_local and cmpxchg/cmpxchg_local share the same code
- * except that local version do not have the expensive memory barrier.
- * So this file is included twice from asm/cmpxchg.h.
- */
-
-/*
- * Atomic exchange.
- * Since it can be used to implement critical sections
- * it must clobber "memory" (also for interrupts in UP).
- */
-
-static inline unsigned long
-____xchg(_u8, volatile char *m, unsigned long val)
-{
-	unsigned long ret, tmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%4,7,%3\n"
-	"	insbl	%1,%4,%1\n"
-	"1:	ldq_l	%2,0(%3)\n"
-	"	extbl	%2,%4,%0\n"
-	"	mskbl	%2,%4,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%3)\n"
-	"	beq	%2,2f\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
-	: "r" ((long)m), "1" (val) : "memory");
-
-	return ret;
-}
-
-static inline unsigned long
-____xchg(_u16, volatile short *m, unsigned long val)
-{
-	unsigned long ret, tmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%4,7,%3\n"
-	"	inswl	%1,%4,%1\n"
-	"1:	ldq_l	%2,0(%3)\n"
-	"	extwl	%2,%4,%0\n"
-	"	mskwl	%2,%4,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%3)\n"
-	"	beq	%2,2f\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	: "=&r" (ret), "=&r" (val), "=&r" (tmp), "=&r" (addr64)
-	: "r" ((long)m), "1" (val) : "memory");
-
-	return ret;
-}
-
-static inline unsigned long
-____xchg(_u32, volatile int *m, unsigned long val)
-{
-	unsigned long dummy;
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%4\n"
-	"	bis $31,%3,%1\n"
-	"	stl_c %1,%2\n"
-	"	beq %1,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	: "=&r" (val), "=&r" (dummy), "=m" (*m)
-	: "rI" (val), "m" (*m) : "memory");
-
-	return val;
-}
-
-static inline unsigned long
-____xchg(_u64, volatile long *m, unsigned long val)
-{
-	unsigned long dummy;
-
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%4\n"
-	"	bis $31,%3,%1\n"
-	"	stq_c %1,%2\n"
-	"	beq %1,2f\n"
-	".subsection 2\n"
-	"2:	br 1b\n"
-	".previous"
-	: "=&r" (val), "=&r" (dummy), "=m" (*m)
-	: "rI" (val), "m" (*m) : "memory");
-
-	return val;
-}
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid xchg().  */
-extern void __xchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-____xchg(, volatile void *ptr, unsigned long x, int size)
-{
-	switch (size) {
-		case 1:
-			return ____xchg(_u8, ptr, x);
-		case 2:
-			return ____xchg(_u16, ptr, x);
-		case 4:
-			return ____xchg(_u32, ptr, x);
-		case 8:
-			return ____xchg(_u64, ptr, x);
-	}
-	__xchg_called_with_bad_pointer();
-	return x;
-}
-
-/*
- * Atomic compare and exchange.  Compare OLD with MEM, if identical,
- * store NEW in MEM.  Return the initial value in MEM.  Success is
- * indicated by comparing RETURN with OLD.
- */
-
-static inline unsigned long
-____cmpxchg(_u8, volatile char *m, unsigned char old, unsigned char new)
-{
-	unsigned long prev, tmp, cmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%5,7,%4\n"
-	"	insbl	%1,%5,%1\n"
-	"1:	ldq_l	%2,0(%4)\n"
-	"	extbl	%2,%5,%0\n"
-	"	cmpeq	%0,%6,%3\n"
-	"	beq	%3,2f\n"
-	"	mskbl	%2,%5,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%4)\n"
-	"	beq	%2,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br	1b\n"
-	".previous"
-	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
-	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u16, volatile short *m, unsigned short old, unsigned short new)
-{
-	unsigned long prev, tmp, cmp, addr64;
-
-	__asm__ __volatile__(
-	"	andnot	%5,7,%4\n"
-	"	inswl	%1,%5,%1\n"
-	"1:	ldq_l	%2,0(%4)\n"
-	"	extwl	%2,%5,%0\n"
-	"	cmpeq	%0,%6,%3\n"
-	"	beq	%3,2f\n"
-	"	mskwl	%2,%5,%2\n"
-	"	or	%1,%2,%2\n"
-	"	stq_c	%2,0(%4)\n"
-	"	beq	%2,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br	1b\n"
-	".previous"
-	: "=&r" (prev), "=&r" (new), "=&r" (tmp), "=&r" (cmp), "=&r" (addr64)
-	: "r" ((long)m), "Ir" (old), "1" (new) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u32, volatile int *m, int old, int new)
-{
-	unsigned long prev, cmp;
-
-	__asm__ __volatile__(
-	"1:	ldl_l %0,%5\n"
-	"	cmpeq %0,%3,%1\n"
-	"	beq %1,2f\n"
-	"	mov %4,%1\n"
-	"	stl_c %1,%2\n"
-	"	beq %1,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
-	: "r"((long) old), "r"(new), "m"(*m) : "memory");
-
-	return prev;
-}
-
-static inline unsigned long
-____cmpxchg(_u64, volatile long *m, unsigned long old, unsigned long new)
-{
-	unsigned long prev, cmp;
-
-	__asm__ __volatile__(
-	"1:	ldq_l %0,%5\n"
-	"	cmpeq %0,%3,%1\n"
-	"	beq %1,2f\n"
-	"	mov %4,%1\n"
-	"	stq_c %1,%2\n"
-	"	beq %1,3f\n"
-	"2:\n"
-	".subsection 2\n"
-	"3:	br 1b\n"
-	".previous"
-	: "=&r"(prev), "=&r"(cmp), "=m"(*m)
-	: "r"((long) old), "r"(new), "m"(*m) : "memory");
-
-	return prev;
-}
-
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid cmpxchg().  */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static __always_inline unsigned long
-____cmpxchg(, volatile void *ptr, unsigned long old, unsigned long new,
-	      int size)
-{
-	switch (size) {
-		case 1:
-			return ____cmpxchg(_u8, ptr, old, new);
-		case 2:
-			return ____cmpxchg(_u16, ptr, old, new);
-		case 4:
-			return ____cmpxchg(_u32, ptr, old, new);
-		case 8:
-			return ____cmpxchg(_u64, ptr, old, new);
-	}
-	__cmpxchg_called_with_bad_pointer();
-	return old;
-}
-
-#endif
diff --git a/arch/alpha/include/asm/xor.h b/arch/alpha/include/asm/xor.h
index 5aeb4fb3cb7c..e0de0c233ab9 100644
--- a/arch/alpha/include/asm/xor.h
+++ b/arch/alpha/include/asm/xor.h
@@ -5,24 +5,43 @@
  * Optimized RAID-5 checksumming functions for alpha EV5 and EV6
  */
 
-extern void xor_alpha_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_alpha_3(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *);
-extern void xor_alpha_4(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *, unsigned long *);
-extern void xor_alpha_5(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *, unsigned long *, unsigned long *);
+extern void
+xor_alpha_2(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2);
+extern void
+xor_alpha_3(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3);
+extern void
+xor_alpha_4(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3,
+	    const unsigned long * __restrict p4);
+extern void
+xor_alpha_5(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3,
+	    const unsigned long * __restrict p4,
+	    const unsigned long * __restrict p5);
 
-extern void xor_alpha_prefetch_2(unsigned long, unsigned long *,
-				 unsigned long *);
-extern void xor_alpha_prefetch_3(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *);
-extern void xor_alpha_prefetch_4(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *,
-				 unsigned long *);
-extern void xor_alpha_prefetch_5(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *,
-				 unsigned long *, unsigned long *);
+extern void
+xor_alpha_prefetch_2(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2);
+extern void
+xor_alpha_prefetch_3(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3);
+extern void
+xor_alpha_prefetch_4(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4);
+extern void
+xor_alpha_prefetch_5(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4,
+		     const unsigned long * __restrict p5);
 
 asm("								\n\
 	.text							\n\
diff --git a/arch/alpha/include/uapi/asm/compiler.h b/arch/alpha/include/uapi/asm/compiler.h
index 0e00c0e13374..8c03740966b4 100644
--- a/arch/alpha/include/uapi/asm/compiler.h
+++ b/arch/alpha/include/uapi/asm/compiler.h
@@ -95,24 +95,6 @@
 #define __kernel_ldwu(mem)	(mem)
 #define __kernel_stb(val,mem)	((mem) = (val))
 #define __kernel_stw(val,mem)	((mem) = (val))
-#else
-#define __kernel_ldbu(mem)				\
-  ({ unsigned char __kir;				\
-     __asm__(".arch ev56;				\
-	      ldbu %0,%1" : "=r"(__kir) : "m"(mem));	\
-     __kir; })
-#define __kernel_ldwu(mem)				\
-  ({ unsigned short __kir;				\
-     __asm__(".arch ev56;				\
-	      ldwu %0,%1" : "=r"(__kir) : "m"(mem));	\
-     __kir; })
-#define __kernel_stb(val,mem)				\
-  __asm__(".arch ev56;					\
-	   stb %1,%0" : "=m"(mem) : "r"(val))
-#define __kernel_stw(val,mem)				\
-  __asm__(".arch ev56;					\
-	   stw %1,%0" : "=m"(mem) : "r"(val))
 #endif
 
-
 #endif /* _UAPI__ALPHA_COMPILER_H */
diff --git a/arch/alpha/include/uapi/asm/mman.h b/arch/alpha/include/uapi/asm/mman.h
index a18ec7f63888..1e700468a685 100644
--- a/arch/alpha/include/uapi/asm/mman.h
+++ b/arch/alpha/include/uapi/asm/mman.h
@@ -71,6 +71,16 @@
 #define MADV_COLD	20		/* deactivate these pages */
 #define MADV_PAGEOUT	21		/* reclaim these pages */
 
+#define MADV_POPULATE_READ	22	/* populate (prefault) page tables readable */
+#define MADV_POPULATE_WRITE	23	/* populate (prefault) page tables writable */
+
+#define MADV_DONTNEED_LOCKED	24	/* like DONTNEED, but drop locked pages too */
+
+#define MADV_COLLAPSE	25		/* Synchronous hugepage collapse */
+
+#define MADV_GUARD_INSTALL 102		/* fatal signal on access to range */
+#define MADV_GUARD_REMOVE 103		/* unguard range */
+
 /* compatibility flags */
 #define MAP_FILE	0
 
diff --git a/arch/alpha/include/uapi/asm/param.h b/arch/alpha/include/uapi/asm/param.h
index 49c7119934e2..e4e410f9bf85 100644
--- a/arch/alpha/include/uapi/asm/param.h
+++ b/arch/alpha/include/uapi/asm/param.h
@@ -2,14 +2,9 @@
 #ifndef _UAPI_ASM_ALPHA_PARAM_H
 #define _UAPI_ASM_ALPHA_PARAM_H
 
-#define HZ		1024
-
+#define __USER_HZ	1024
 #define EXEC_PAGESIZE	8192
 
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
+#include <asm-generic/param.h>
 
 #endif /* _UAPI_ASM_ALPHA_PARAM_H */
diff --git a/arch/alpha/include/uapi/asm/ptrace.h b/arch/alpha/include/uapi/asm/ptrace.h
index c29194181025..72ed913a910f 100644
--- a/arch/alpha/include/uapi/asm/ptrace.h
+++ b/arch/alpha/include/uapi/asm/ptrace.h
@@ -42,6 +42,8 @@ struct pt_regs {
 	unsigned long trap_a0;
 	unsigned long trap_a1;
 	unsigned long trap_a2;
+/* This makes the stack 16-byte aligned as GCC expects */
+	unsigned long __pad0;
 /* These are saved by PAL-code: */
 	unsigned long ps;
 	unsigned long pc;
@@ -64,7 +66,9 @@ struct switch_stack {
 	unsigned long r14;
 	unsigned long r15;
 	unsigned long r26;
+#ifndef __KERNEL__
 	unsigned long fp[32];	/* fp[31] is fpcr */
+#endif
 };
 
 
diff --git a/arch/alpha/include/uapi/asm/setup.h b/arch/alpha/include/uapi/asm/setup.h
index 13b7ee465b0e..f881ea5947cb 100644
--- a/arch/alpha/include/uapi/asm/setup.h
+++ b/arch/alpha/include/uapi/asm/setup.h
@@ -1,43 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __ALPHA_SETUP_H
-#define __ALPHA_SETUP_H
+#ifndef _UAPI__ALPHA_SETUP_H
+#define _UAPI__ALPHA_SETUP_H
 
 #define COMMAND_LINE_SIZE	256
 
-/*
- * We leave one page for the initial stack page, and one page for
- * the initial process structure. Also, the console eats 3 MB for
- * the initial bootloader (one of which we can reclaim later).
- */
-#define BOOT_PCB	0x20000000
-#define BOOT_ADDR	0x20000000
-/* Remove when official MILO sources have ELF support: */
-#define BOOT_SIZE	(16*1024)
-
-#ifdef CONFIG_ALPHA_LEGACY_START_ADDRESS
-#define KERNEL_START_PHYS	0x300000 /* Old bootloaders hardcoded this.  */
-#else
-#define KERNEL_START_PHYS	0x1000000 /* required: Wildfire/Titan/Marvel */
-#endif
-
-#define KERNEL_START	(PAGE_OFFSET+KERNEL_START_PHYS)
-#define SWAPPER_PGD	KERNEL_START
-#define INIT_STACK	(PAGE_OFFSET+KERNEL_START_PHYS+0x02000)
-#define EMPTY_PGT	(PAGE_OFFSET+KERNEL_START_PHYS+0x04000)
-#define EMPTY_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x08000)
-#define ZERO_PGE	(PAGE_OFFSET+KERNEL_START_PHYS+0x0A000)
-
-#define START_ADDR	(PAGE_OFFSET+KERNEL_START_PHYS+0x10000)
-
-/*
- * This is setup by the secondary bootstrap loader.  Because
- * the zero page is zeroed out as soon as the vm system is
- * initialized, we need to copy things out into a more permanent
- * place.
- */
-#define PARAM			ZERO_PGE
-#define COMMAND_LINE		((char*)(PARAM + 0x0000))
-#define INITRD_START		(*(unsigned long *) (PARAM+0x100))
-#define INITRD_SIZE		(*(unsigned long *) (PARAM+0x108))
-
-#endif
+#endif /* _UAPI__ALPHA_SETUP_H */
diff --git a/arch/alpha/include/uapi/asm/siginfo.h b/arch/alpha/include/uapi/asm/siginfo.h
index 6e1a2af2f962..e08eae88182b 100644
--- a/arch/alpha/include/uapi/asm/siginfo.h
+++ b/arch/alpha/include/uapi/asm/siginfo.h
@@ -2,8 +2,6 @@
 #ifndef _ALPHA_SIGINFO_H
 #define _ALPHA_SIGINFO_H
 
-#define __ARCH_SI_TRAPNO
-
 #include <asm-generic/siginfo.h>
 
 #endif
diff --git a/arch/alpha/include/uapi/asm/signal.h b/arch/alpha/include/uapi/asm/signal.h
index 74c750bf1c1a..1413075f7616 100644
--- a/arch/alpha/include/uapi/asm/signal.h
+++ b/arch/alpha/include/uapi/asm/signal.h
@@ -60,20 +60,6 @@ typedef unsigned long sigset_t;
 #define SIGRTMIN	32
 #define SIGRTMAX	_NSIG
 
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-
 #define SA_ONSTACK	0x00000001
 #define SA_RESTART	0x00000002
 #define SA_NOCLDSTOP	0x00000004
@@ -114,7 +100,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 /* sigstack(2) is deprecated, and will be withdrawn in a future version
diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h
index de6c4df61082..5ef57f88df6b 100644
--- a/arch/alpha/include/uapi/asm/socket.h
+++ b/arch/alpha/include/uapi/asm/socket.h
@@ -124,6 +124,37 @@
 
 #define SO_DETACH_REUSEPORT_BPF 68
 
+#define SO_PREFER_BUSY_POLL	69
+#define SO_BUSY_POLL_BUDGET	70
+
+#define SO_NETNS_COOKIE		71
+
+#define SO_BUF_LOCK		72
+
+#define SO_RESERVE_MEM		73
+
+#define SO_TXREHASH		74
+
+#define SO_RCVMARK		75
+
+#define SO_PASSPIDFD		76
+#define SO_PEERPIDFD		77
+
+#define SO_DEVMEM_LINEAR	78
+#define SCM_DEVMEM_LINEAR	SO_DEVMEM_LINEAR
+#define SO_DEVMEM_DMABUF	79
+#define SCM_DEVMEM_DMABUF	SO_DEVMEM_DMABUF
+#define SO_DEVMEM_DONTNEED	80
+
+#define SCM_TS_OPT_ID		81
+
+#define SO_RCVPRIORITY		82
+
+#define SO_PASSRIGHTS		83
+
+#define SO_INQ			84
+#define SCM_INQ			SO_INQ
+
 #if !defined(__KERNEL__)
 
 #if __BITS_PER_LONG == 64
diff --git a/arch/alpha/include/uapi/asm/termbits.h b/arch/alpha/include/uapi/asm/termbits.h
index 4575ba34a0ea..f1290b22072b 100644
--- a/arch/alpha/include/uapi/asm/termbits.h
+++ b/arch/alpha/include/uapi/asm/termbits.h
@@ -2,10 +2,8 @@
 #ifndef _ALPHA_TERMBITS_H
 #define _ALPHA_TERMBITS_H
 
-#include <linux/posix_types.h>
+#include <asm-generic/termbits-common.h>
 
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
 typedef unsigned int	tcflag_t;
 
 /*
@@ -53,76 +51,58 @@ struct ktermios {
 };
 
 /* c_cc characters */
-#define VEOF 0
-#define VEOL 1
-#define VEOL2 2
-#define VERASE 3
-#define VWERASE 4
-#define VKILL 5
-#define VREPRINT 6
-#define VSWTC 7
-#define VINTR 8
-#define VQUIT 9
-#define VSUSP 10
-#define VSTART 12
-#define VSTOP 13
-#define VLNEXT 14
-#define VDISCARD 15
-#define VMIN 16
-#define VTIME 17
+#define VEOF		 0
+#define VEOL		 1
+#define VEOL2		 2
+#define VERASE		 3
+#define VWERASE		 4
+#define VKILL		 5
+#define VREPRINT	 6
+#define VSWTC		 7
+#define VINTR		 8
+#define VQUIT		 9
+#define VSUSP		10
+#define VSTART		12
+#define VSTOP		13
+#define VLNEXT		14
+#define VDISCARD	15
+#define VMIN		16
+#define VTIME		17
 
 /* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IXON	0001000
-#define IXOFF	0002000
-#define IXANY	0004000
-#define IUCLC	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
+#define IXON	0x0200
+#define IXOFF	0x0400
+#define IUCLC	0x1000
+#define IMAXBEL	0x2000
+#define IUTF8	0x4000
 
 /* c_oflag bits */
-#define OPOST	0000001
-#define ONLCR	0000002
-#define OLCUC	0000004
-
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-
-#define OFILL	00000100
-#define OFDEL	00000200
-#define NLDLY	00001400
-#define   NL0	00000000
-#define   NL1	00000400
-#define   NL2	00001000
-#define   NL3	00001400
-#define TABDLY	00006000
-#define   TAB0	00000000
-#define   TAB1	00002000
-#define   TAB2	00004000
-#define   TAB3	00006000
-#define CRDLY	00030000
-#define   CR0	00000000
-#define   CR1	00010000
-#define   CR2	00020000
-#define   CR3	00030000
-#define FFDLY	00040000
-#define   FF0	00000000
-#define   FF1	00040000
-#define BSDLY	00100000
-#define   BS0	00000000
-#define   BS1	00100000
-#define VTDLY	00200000
-#define   VT0	00000000
-#define   VT1	00200000
+#define ONLCR	0x00002
+#define OLCUC	0x00004
+#define NLDLY	0x00300
+#define   NL0	0x00000
+#define   NL1	0x00100
+#define   NL2	0x00200
+#define   NL3	0x00300
+#define TABDLY	0x00c00
+#define   TAB0	0x00000
+#define   TAB1	0x00400
+#define   TAB2	0x00800
+#define   TAB3	0x00c00
+#define CRDLY	0x03000
+#define   CR0	0x00000
+#define   CR1	0x01000
+#define   CR2	0x02000
+#define   CR3	0x03000
+#define FFDLY	0x04000
+#define   FF0	0x00000
+#define   FF1	0x04000
+#define BSDLY	0x08000
+#define   BS0	0x00000
+#define   BS1	0x08000
+#define VTDLY	0x10000
+#define   VT0	0x00000
+#define   VT1	0x10000
 /*
  * Should be equivalent to TAB3, see description of TAB3 in
  * POSIX.1-2008, Ch. 11.2.3 "Output Modes"
@@ -130,61 +110,36 @@ struct ktermios {
 #define XTABS	TAB3
 
 /* c_cflag bit meaning */
-#define CBAUD	0000037
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CBAUDEX 0000000
-#define  B57600   00020
-#define  B115200  00021
-#define  B230400  00022
-#define  B460800  00023
-#define  B500000  00024
-#define  B576000  00025
-#define  B921600  00026
-#define B1000000  00027
-#define B1152000  00030
-#define B1500000  00031
-#define B2000000  00032
-#define B2500000  00033
-#define B3000000  00034
-#define B3500000  00035
-#define B4000000  00036
-#define BOTHER    00037
-
-#define CSIZE	00001400
-#define   CS5	00000000
-#define   CS6	00000400
-#define   CS7	00001000
-#define   CS8	00001400
-
-#define CSTOPB	00002000
-#define CREAD	00004000
-#define PARENB	00010000
-#define PARODD	00020000
-#define HUPCL	00040000
-
-#define CLOCAL	00100000
-#define CMSPAR	  010000000000		/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000		/* flow control */
-
-#define CIBAUD	07600000
-#define IBSHIFT	16
+#define CBAUD		0x0000001f
+#define CBAUDEX		0x00000000
+#define BOTHER		0x0000001f
+#define     B57600	0x00000010
+#define    B115200	0x00000011
+#define    B230400	0x00000012
+#define    B460800	0x00000013
+#define    B500000	0x00000014
+#define    B576000	0x00000015
+#define    B921600	0x00000016
+#define   B1000000	0x00000017
+#define   B1152000	0x00000018
+#define   B1500000	0x00000019
+#define   B2000000	0x0000001a
+#define   B2500000	0x0000001b
+#define   B3000000	0x0000001c
+#define   B3500000	0x0000001d
+#define   B4000000	0x0000001e
+#define CSIZE		0x00000300
+#define   CS5		0x00000000
+#define   CS6		0x00000100
+#define   CS7		0x00000200
+#define   CS8		0x00000300
+#define CSTOPB		0x00000400
+#define CREAD		0x00000800
+#define PARENB		0x00001000
+#define PARODD		0x00002000
+#define HUPCL		0x00004000
+#define CLOCAL		0x00008000
+#define CIBAUD		0x001f0000
 
 /* c_lflag bits */
 #define ISIG	0x00000080
@@ -204,17 +159,6 @@ struct ktermios {
 #define IEXTEN	0x00000400
 #define EXTPROC	0x10000000
 
-/* Values for the ACTION argument to `tcflow'.  */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
 /* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
 #define	TCSANOW		0
 #define	TCSADRAIN	1
diff --git a/arch/alpha/kernel/.gitignore b/arch/alpha/kernel/.gitignore
index c5f676c3c224..bbb90f92d051 100644
--- a/arch/alpha/kernel/.gitignore
+++ b/arch/alpha/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index 5a74581bf0ee..187cd8df2faf 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -3,13 +3,13 @@
 # Makefile for the linux kernel.
 #
 
-extra-y		:= head.o vmlinux.lds
+always-$(KBUILD_BUILTIN)	:= vmlinux.lds
 asflags-y	:= $(KBUILD_CFLAGS)
 ccflags-y	:= -Wno-sign-compare
 
-obj-y    := entry.o traps.o process.o osf_sys.o irq.o \
+obj-y    := head.o entry.o traps.o process.o osf_sys.o irq.o \
 	    irq_alpha.o signal.o setup.o ptrace.o time.o \
-	    systbls.o err_common.o io.o bugs.o
+	    systbls.o err_common.o io.o bugs.o termios.o
 
 obj-$(CONFIG_VGA_HOSE)	+= console.o
 obj-$(CONFIG_SMP)	+= smp.o
@@ -22,14 +22,14 @@ obj-$(CONFIG_AUDIT)	+= audit.o
 
 ifdef CONFIG_ALPHA_GENERIC
 
-obj-y 	 += core_apecs.o core_cia.o core_irongate.o core_lca.o \
+obj-y 	 += core_cia.o core_irongate.o \
 	    core_mcpcia.o core_polaris.o core_t2.o \
 	    core_tsunami.o
 
-obj-y	 += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eb64p.o sys_eiger.o \
-	    sys_jensen.o sys_miata.o sys_mikasa.o sys_nautilus.o \
+obj-y	 += sys_alcor.o sys_cabriolet.o sys_dp264.o sys_eiger.o \
+	    sys_miata.o sys_mikasa.o sys_nautilus.o \
 	    sys_noritake.o sys_rawhide.o sys_ruffian.o sys_rx164.o \
-	    sys_sable.o sys_sio.o sys_sx164.o sys_takara.o
+	    sys_sable.o sys_sx164.o sys_takara.o
 
 ifndef CONFIG_ALPHA_LEGACY_START_ADDRESS
 obj-y	 += core_marvel.o core_titan.o core_wildfire.o
@@ -47,15 +47,9 @@ else
 # Misc support
 obj-$(CONFIG_ALPHA_SRM)		+= srmcons.o
 
-ifdef CONFIG_BINFMT_AOUT
-obj-y	+= binfmt_loader.o
-endif
-
 # Core logic support
-obj-$(CONFIG_ALPHA_APECS)	+= core_apecs.o
 obj-$(CONFIG_ALPHA_CIA)		+= core_cia.o
 obj-$(CONFIG_ALPHA_IRONGATE)	+= core_irongate.o
-obj-$(CONFIG_ALPHA_LCA)		+= core_lca.o
 obj-$(CONFIG_ALPHA_MARVEL)	+= core_marvel.o gct.o
 obj-$(CONFIG_ALPHA_MCPCIA)	+= core_mcpcia.o
 obj-$(CONFIG_ALPHA_POLARIS)	+= core_polaris.o
@@ -66,12 +60,6 @@ obj-$(CONFIG_ALPHA_WILDFIRE)	+= core_wildfire.o
 
 # Board support
 obj-$(CONFIG_ALPHA_ALCOR)	+= sys_alcor.o irq_i8259.o irq_srm.o
-obj-$(CONFIG_ALPHA_CABRIOLET)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
-obj-$(CONFIG_ALPHA_EB164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
-obj-$(CONFIG_ALPHA_EB66P)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
-				   pc873xx.o
 obj-$(CONFIG_ALPHA_LX164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 				   smc37c93x.o
 obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
@@ -79,10 +67,7 @@ obj-$(CONFIG_ALPHA_PC164)	+= sys_cabriolet.o irq_i8259.o irq_srm.o \
 obj-$(CONFIG_ALPHA_DP264)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
 obj-$(CONFIG_ALPHA_SHARK)	+= sys_dp264.o irq_i8259.o es1888.o smc37c669.o
 obj-$(CONFIG_ALPHA_TITAN)	+= sys_titan.o irq_i8259.o smc37c669.o
-obj-$(CONFIG_ALPHA_EB64P)	+= sys_eb64p.o irq_i8259.o
-obj-$(CONFIG_ALPHA_EB66)	+= sys_eb64p.o irq_i8259.o
 obj-$(CONFIG_ALPHA_EIGER)	+= sys_eiger.o irq_i8259.o
-obj-$(CONFIG_ALPHA_JENSEN)	+= sys_jensen.o pci-noop.o irq_i8259.o
 obj-$(CONFIG_ALPHA_MARVEL)	+= sys_marvel.o 
 obj-$(CONFIG_ALPHA_MIATA)	+= sys_miata.o irq_pyxis.o irq_i8259.o \
 				   es1888.o smc37c669.o
@@ -93,12 +78,6 @@ obj-$(CONFIG_ALPHA_RAWHIDE)	+= sys_rawhide.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RUFFIAN)	+= sys_ruffian.o irq_pyxis.o irq_i8259.o
 obj-$(CONFIG_ALPHA_RX164)	+= sys_rx164.o irq_i8259.o
 obj-$(CONFIG_ALPHA_SABLE)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_LYNX)	+= sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_AVANTI)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_NONAME)	+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_P2K)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
-obj-$(CONFIG_ALPHA_XL)		+= sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
 obj-$(CONFIG_ALPHA_SX164)	+= sys_sx164.o irq_pyxis.o irq_i8259.o \
 				   irq_srm.o smc37c669.o
 obj-$(CONFIG_ALPHA_TAKARA)	+= sys_takara.o irq_i8259.o pc873xx.o
diff --git a/arch/alpha/kernel/asm-offsets.c b/arch/alpha/kernel/asm-offsets.c
index 2e125e5c1508..1ebb05890499 100644
--- a/arch/alpha/kernel/asm-offsets.c
+++ b/arch/alpha/kernel/asm-offsets.c
@@ -4,39 +4,27 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/types.h>
 #include <linux/stddef.h>
 #include <linux/sched.h>
 #include <linux/ptrace.h>
 #include <linux/kbuild.h>
-#include <asm/io.h>
+#include <asm/machvec.h>
 
-void foo(void)
+static void __used foo(void)
 {
-	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+	DEFINE(TI_FP, offsetof(struct thread_info, fp));
+	DEFINE(TI_STATUS, offsetof(struct thread_info, status));
 	BLANK();
 
-        DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
-        DEFINE(TASK_CRED, offsetof(struct task_struct, cred));
-        DEFINE(TASK_REAL_PARENT, offsetof(struct task_struct, real_parent));
-        DEFINE(TASK_GROUP_LEADER, offsetof(struct task_struct, group_leader));
-        DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
-        BLANK();
-
-        DEFINE(CRED_UID,  offsetof(struct cred, uid));
-        DEFINE(CRED_EUID, offsetof(struct cred, euid));
-        DEFINE(CRED_GID,  offsetof(struct cred, gid));
-        DEFINE(CRED_EGID, offsetof(struct cred, egid));
-        BLANK();
-
+	DEFINE(SP_OFF, offsetof(struct pt_regs, ps));
 	DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
-	DEFINE(PT_PTRACED, PT_PTRACED);
-	DEFINE(CLONE_VM, CLONE_VM);
-	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
-	DEFINE(SIGCHLD, SIGCHLD);
+	BLANK();
+
+	DEFINE(SWITCH_STACK_SIZE, sizeof(struct switch_stack));
 	BLANK();
 
 	DEFINE(HAE_CACHE, offsetof(struct alpha_machine_vector, hae_cache));
diff --git a/arch/alpha/kernel/audit.c b/arch/alpha/kernel/audit.c
index 96a9d18ff4c4..3ab04709784a 100644
--- a/arch/alpha/kernel/audit.c
+++ b/arch/alpha/kernel/audit.c
@@ -37,13 +37,15 @@ int audit_classify_syscall(int abi, unsigned syscall)
 {
 	switch(syscall) {
 	case __NR_open:
-		return 2;
+		return AUDITSC_OPEN;
 	case __NR_openat:
-		return 3;
+		return AUDITSC_OPENAT;
 	case __NR_execve:
-		return 5;
+		return AUDITSC_EXECVE;
+	case __NR_openat2:
+		return AUDITSC_OPENAT2;
 	default:
-		return 0;
+		return AUDITSC_NATIVE;
 	}
 }
 
diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c
deleted file mode 100644
index a8d0d6e06526..000000000000
--- a/arch/alpha/kernel/binfmt_loader.c
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/mm_types.h>
-#include <linux/binfmts.h>
-#include <linux/a.out.h>
-
-static int load_binary(struct linux_binprm *bprm)
-{
-	struct exec *eh = (struct exec *)bprm->buf;
-	unsigned long loader;
-	struct file *file;
-	int retval;
-
-	if (eh->fh.f_magic != 0x183 || (eh->fh.f_flags & 0x3000) != 0x3000)
-		return -ENOEXEC;
-
-	if (bprm->loader)
-		return -ENOEXEC;
-
-	allow_write_access(bprm->file);
-	fput(bprm->file);
-	bprm->file = NULL;
-
-	loader = bprm->vma->vm_end - sizeof(void *);
-
-	file = open_exec("/sbin/loader");
-	retval = PTR_ERR(file);
-	if (IS_ERR(file))
-		return retval;
-
-	/* Remember if the application is TASO.  */
-	bprm->taso = eh->ah.entry < 0x100000000UL;
-
-	bprm->file = file;
-	bprm->loader = loader;
-	retval = prepare_binprm(bprm);
-	if (retval < 0)
-		return retval;
-	return search_binary_handler(bprm);
-}
-
-static struct linux_binfmt loader_format = {
-	.load_binary	= load_binary,
-};
-
-static int __init init_loader_binfmt(void)
-{
-	insert_binfmt(&loader_format);
-	return 0;
-}
-arch_initcall(init_loader_binfmt);
diff --git a/arch/alpha/kernel/bugs.c b/arch/alpha/kernel/bugs.c
index 08cc10d7fa17..e8c51089325f 100644
--- a/arch/alpha/kernel/bugs.c
+++ b/arch/alpha/kernel/bugs.c
@@ -1,6 +1,7 @@
 
 #include <asm/hwrpb.h>
 #include <linux/device.h>
+#include <linux/cpu.h>
 
 
 #ifdef CONFIG_SYSFS
diff --git a/arch/alpha/kernel/console.c b/arch/alpha/kernel/console.c
index 5476279329a6..4193f76e9633 100644
--- a/arch/alpha/kernel/console.c
+++ b/arch/alpha/kernel/console.c
@@ -15,6 +15,7 @@
 #include <asm/machvec.h>
 
 #include "pci_impl.h"
+#include "proto.h"
 
 #ifdef CONFIG_VGA_HOSE
 
diff --git a/arch/alpha/kernel/core_apecs.c b/arch/alpha/kernel/core_apecs.c
deleted file mode 100644
index 6df765ff2b10..000000000000
--- a/arch/alpha/kernel/core_apecs.c
+++ /dev/null
@@ -1,420 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/core_apecs.c
- *
- * Rewritten for Apecs from the lca.c from:
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all APECS core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_apecs.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-#include <asm/smp.h>
-#include <asm/mce.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-/*
- * NOTE: Herein lie back-to-back mb instructions.  They are magic. 
- * One plausible explanation is that the i/o controller does not properly
- * handle the system transaction.  Another involves timing.  Ho hum.
- */
-
-/*
- * BIOS32-style PCI interface:
- */
-
-#define DEBUG_CONFIG 0
-
-#if DEBUG_CONFIG
-# define DBGC(args)	printk args
-#else
-# define DBGC(args)
-#endif
-
-#define vuip	volatile unsigned int  *
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the APECS_HAXR2 register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr, unsigned char *type1)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
-	      " pci_addr=0x%p, type1=0x%p)\n",
-	      bus, device_fn, where, pci_addr, type1));
-
-	if (bus == 0) {
-		int device = device_fn >> 3;
-
-		/* type 0 configuration cycle: */
-
-		if (device > 20) {
-			DBGC(("mk_conf_addr: device (%d) > 20, returning -1\n",
-			      device));
-			return -1;
-		}
-
-		*type1 = 0;
-		addr = (device_fn << 8) | (where);
-	} else {
-		/* type 1 configuration cycle: */
-		*type1 = 1;
-		addr = (bus << 16) | (device_fn << 8) | (where);
-	}
-	*pci_addr = addr;
-	DBGC(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
-	return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr, unsigned char type1)
-{
-	unsigned long flags;
-	unsigned int stat0, value;
-	unsigned int haxr2 = 0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	DBGC(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	*(vuip)APECS_IOC_DCSR = stat0;
-	mb();
-	DBGC(("conf_read: APECS DCSR was 0x%x\n", stat0));
-
-	/* If Type1 access, must set HAE #2. */
-	if (type1) {
-		haxr2 = *(vuip)APECS_IOC_HAXR2;
-		mb();
-		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
-		DBGC(("conf_read: TYPE1 access\n"));
-	}
-
-	draina();
-	mcheck_expected(0) = 1;
-	mcheck_taken(0) = 0;
-	mb();
-
-	/* Access configuration space.  */
-
-	/* Some SRMs step on these registers during a machine check.  */
-	asm volatile("ldl %0,%1; mb; mb" : "=r"(value) : "m"(*(vuip)addr)
-		     : "$9", "$10", "$11", "$12", "$13", "$14", "memory");
-
-	if (mcheck_taken(0)) {
-		mcheck_taken(0) = 0;
-		value = 0xffffffffU;
-		mb();
-	}
-	mcheck_expected(0) = 0;
-	mb();
-
-#if 1
-	/*
-	 * david.rusling@reo.mts.dec.com.  This code is needed for the
-	 * EB64+ as it does not generate a machine check (why I don't
-	 * know).  When we build kernels for one particular platform
-	 * then we can make this conditional on the type.
-	 */
-	draina();
-
-	/* Now look for any errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	DBGC(("conf_read: APECS DCSR after read 0x%x\n", stat0));
-
-	/* Is any error bit set? */
-	if (stat0 & 0xffe0U) {
-		/* If not NDEV, print status.  */
-		if (!(stat0 & 0x0800)) {
-			printk("apecs.c:conf_read: got stat0=%x\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vuip)APECS_IOC_DCSR = stat0;
-		mb();
-		wrmces(0x7);			/* reset machine check */
-		value = 0xffffffff;
-	}
-#endif
-
-	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
-	if (type1) {
-		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
-		mb();
-	}
-	local_irq_restore(flags);
-
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value, unsigned char type1)
-{
-	unsigned long flags;
-	unsigned int stat0;
-	unsigned int haxr2 = 0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-	*(vuip)APECS_IOC_DCSR = stat0;
-	mb();
-
-	/* If Type1 access, must set HAE #2. */
-	if (type1) {
-		haxr2 = *(vuip)APECS_IOC_HAXR2;
-		mb();
-		*(vuip)APECS_IOC_HAXR2 = haxr2 | 1;
-	}
-
-	draina();
-	mcheck_expected(0) = 1;
-	mb();
-
-	/* Access configuration space.  */
-	*(vuip)addr = value;
-	mb();
-	mb();  /* magic */
-	mcheck_expected(0) = 0;
-	mb();
-
-#if 1
-	/*
-	 * david.rusling@reo.mts.dec.com.  This code is needed for the
-	 * EB64+ as it does not generate a machine check (why I don't
-	 * know).  When we build kernels for one particular platform
-	 * then we can make this conditional on the type.
-	 */
-	draina();
-
-	/* Now look for any errors.  */
-	stat0 = *(vuip)APECS_IOC_DCSR;
-
-	/* Is any error bit set? */
-	if (stat0 & 0xffe0U) {
-		/* If not NDEV, print status.  */
-		if (!(stat0 & 0x0800)) {
-			printk("apecs.c:conf_write: got stat0=%x\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vuip)APECS_IOC_DCSR = stat0;
-		mb();
-		wrmces(0x7);			/* reset machine check */
-	}
-#endif
-
-	/* If Type1 access, must reset HAE #2 so normal IO space ops work.  */
-	if (type1) {
-		*(vuip)APECS_IOC_HAXR2 = haxr2 & ~1;
-		mb();
-	}
-	local_irq_restore(flags);
-}
-
-static int
-apecs_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		  int size, u32 *value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	long mask;
-	int shift;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	shift = (where & 3) * 8;
-	addr = (pci_addr << 5) + mask + APECS_CONF;
-	*value = conf_read(addr, type1) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-apecs_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		   int size, u32 value)
-{
-	unsigned long addr, pci_addr;
-	unsigned char type1;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + APECS_CONF;
-	conf_write(addr, value << ((where & 3) * 8), type1);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops apecs_pci_ops = 
-{
-	.read =		apecs_read_config,
-	.write =	apecs_write_config,
-};
-
-void
-apecs_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vip)APECS_IOC_TBIA = 0;
-	mb();
-}
-
-void __init
-apecs_init_arch(void)
-{
-	struct pci_controller *hose;
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = APECS_SPARSE_MEM - IDENT_ADDR;
-	hose->dense_mem_base = APECS_DENSE_MEM - IDENT_ADDR;
-	hose->sparse_io_base = APECS_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Window 1 is direct access 1GB at 1GB
-	 * Window 2 is scatter-gather 8MB at 8MB (for isa)
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
-				       SMP_CACHE_BYTES);
-	hose->sg_pci = NULL;
-	__direct_map_base = 0x40000000;
-	__direct_map_size = 0x40000000;
-
-	*(vuip)APECS_IOC_PB1R = __direct_map_base | 0x00080000;
-	*(vuip)APECS_IOC_PM1R = (__direct_map_size - 1) & 0xfff00000U;
-	*(vuip)APECS_IOC_TB1R = 0;
-
-	*(vuip)APECS_IOC_PB2R = hose->sg_isa->dma_base | 0x000c0000;
-	*(vuip)APECS_IOC_PM2R = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vuip)APECS_IOC_TB2R = virt_to_phys(hose->sg_isa->ptes) >> 1;
-
-	apecs_pci_tbi(hose, 0, -1);
-
-	/*
-	 * Finally, clear the HAXR2 register, which gets used
-	 * for PCI Config Space accesses. That is the way
-	 * we want to use it, and we do not want to depend on
-	 * what ARC or SRM might have left behind...
-	 */
-	*(vuip)APECS_IOC_HAXR2 = 0;
-	mb();
-}
-
-void
-apecs_pci_clr_err(void)
-{
-	unsigned int jd;
-
-	jd = *(vuip)APECS_IOC_DCSR;
-	if (jd & 0xffe0L) {
-		*(vuip)APECS_IOC_SEAR;
-		*(vuip)APECS_IOC_DCSR = jd | 0xffe1L;
-		mb();
-		*(vuip)APECS_IOC_DCSR;
-	}
-	*(vuip)APECS_IOC_TBIA = (unsigned int)APECS_IOC_TBIA;
-	mb();
-	*(vuip)APECS_IOC_TBIA;
-}
-
-void
-apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	struct el_common *mchk_header;
-	struct el_apecs_procdata *mchk_procdata;
-	struct el_apecs_sysdata_mcheck *mchk_sysdata;
-
-	mchk_header = (struct el_common *)la_ptr;
-
-	mchk_procdata = (struct el_apecs_procdata *)
-		(la_ptr + mchk_header->proc_offset
-		 - sizeof(mchk_procdata->paltemp));
-
-	mchk_sysdata = (struct el_apecs_sysdata_mcheck *)
-		(la_ptr + mchk_header->sys_offset);
-
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb(); /* magic */
-	draina();
-	apecs_pci_clr_err();
-	wrmces(0x7);		/* reset machine check pending flag */
-	mb();
-
-	process_mcheck_info(vector, la_ptr, "APECS",
-			    (mcheck_expected(0)
-			     && (mchk_sysdata->epic_dcsr & 0x0c00UL)));
-}
diff --git a/arch/alpha/kernel/core_cia.c b/arch/alpha/kernel/core_cia.c
index f489170201c3..6e577228e175 100644
--- a/arch/alpha/kernel/core_cia.c
+++ b/arch/alpha/kernel/core_cia.c
@@ -280,7 +280,7 @@ cia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
 #define CIA_BROKEN_TBIA_SIZE	1024
 
 /* Always called with interrupts disabled */
-void
+static void
 cia_pci_tbi_try2(struct pci_controller *hose,
 		 dma_addr_t start, dma_addr_t end)
 {
@@ -331,10 +331,7 @@ cia_prepare_tbia_workaround(int window)
 	long i;
 
 	/* Use minimal 1K map. */
-	ppte = memblock_alloc(CIA_BROKEN_TBIA_SIZE, 32768);
-	if (!ppte)
-		panic("%s: Failed to allocate %u bytes align=0x%x\n",
-		      __func__, CIA_BROKEN_TBIA_SIZE, 32768);
+	ppte = memblock_alloc_or_panic(CIA_BROKEN_TBIA_SIZE, 32768);
 	pte = (virt_to_phys(ppte) >> (PAGE_SHIFT - 1)) | 1;
 
 	for (i = 0; i < CIA_BROKEN_TBIA_SIZE / sizeof(unsigned long); ++i)
@@ -527,7 +524,7 @@ verify_tb_operation(void)
 	if (use_tbia_try2) {
 		alpha_mv.mv_pci_tbi = cia_pci_tbi_try2;
 
-		/* Tags 0-3 must be disabled if we use this workaraund. */
+		/* Tags 0-3 must be disabled if we use this workaround. */
 		wmb();
 		*(vip)CIA_IOC_TB_TAGn(0) = 2;
 		*(vip)CIA_IOC_TB_TAGn(1) = 2;
@@ -576,7 +573,7 @@ struct
     } window[4];
 } saved_config __attribute((common));
 
-void
+static void
 cia_save_srm_settings(int is_pyxis)
 {
 	int i;
@@ -602,7 +599,7 @@ cia_save_srm_settings(int is_pyxis)
 	mb();
 }
 
-void
+static void
 cia_restore_srm_settings(void)
 {
 	int i;
diff --git a/arch/alpha/kernel/core_irongate.c b/arch/alpha/kernel/core_irongate.c
index a9fd133a7fb2..05dc4c1b9074 100644
--- a/arch/alpha/kernel/core_irongate.c
+++ b/arch/alpha/kernel/core_irongate.c
@@ -226,14 +226,13 @@ albacore_init_arch(void)
 	if (memtop > pci_mem) {
 #ifdef CONFIG_BLK_DEV_INITRD
 		extern unsigned long initrd_start, initrd_end;
-		extern void *move_initrd(unsigned long);
 
 		/* Move the initrd out of the way. */
 		if (initrd_end && __pa(initrd_end) > pci_mem) {
 			unsigned long size;
 
 			size = initrd_end - initrd_start;
-			memblock_free(__pa(initrd_start), PAGE_ALIGN(size));
+			memblock_free((void *)initrd_start, PAGE_ALIGN(size));
 			if (!move_initrd(pci_mem))
 				printk("irongate_init_arch: initrd too big "
 				       "(%ldK)\ndisabling initrd\n",
@@ -302,7 +301,6 @@ irongate_init_arch(void)
 #include <linux/agp_backend.h>
 #include <linux/agpgart.h>
 #include <linux/export.h>
-#include <asm/pgalloc.h>
 
 #define GET_PAGE_DIR_OFF(addr) (addr >> 22)
 #define GET_PAGE_DIR_IDX(addr) (GET_PAGE_DIR_OFF(addr))
diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c
deleted file mode 100644
index 57e0750419f2..000000000000
--- a/arch/alpha/kernel/core_lca.c
+++ /dev/null
@@ -1,517 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/core_lca.c
- *
- * Written by David Mosberger (davidm@cs.arizona.edu) with some code
- * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
- * bios code.
- *
- * Code common to all LCA core logic chips.
- */
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/core_lca.h>
-#undef __EXTERN_INLINE
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/tty.h>
-
-#include <asm/ptrace.h>
-#include <asm/irq_regs.h>
-#include <asm/smp.h>
-
-#include "proto.h"
-#include "pci_impl.h"
-
-
-/*
- * BIOS32-style PCI interface:
- */
-
-/*
- * Machine check reasons.  Defined according to PALcode sources
- * (osf.h and platform.h).
- */
-#define MCHK_K_TPERR		0x0080
-#define MCHK_K_TCPERR		0x0082
-#define MCHK_K_HERR		0x0084
-#define MCHK_K_ECC_C		0x0086
-#define MCHK_K_ECC_NC		0x0088
-#define MCHK_K_UNKNOWN		0x008A
-#define MCHK_K_CACKSOFT		0x008C
-#define MCHK_K_BUGCHECK		0x008E
-#define MCHK_K_OS_BUGCHECK	0x0090
-#define MCHK_K_DCPERR		0x0092
-#define MCHK_K_ICPERR		0x0094
-
-
-/*
- * Platform-specific machine-check reasons:
- */
-#define MCHK_K_SIO_SERR		0x204	/* all platforms so far */
-#define MCHK_K_SIO_IOCHK	0x206	/* all platforms so far */
-#define MCHK_K_DCSR		0x208	/* all but Noname */
-
-
-/*
- * Given a bus, device, and function number, compute resulting
- * configuration space address and setup the LCA_IOC_CONF register
- * accordingly.  It is therefore not safe to have concurrent
- * invocations to configuration space access routines, but there
- * really shouldn't be any need for this.
- *
- * Type 0:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:11	Device select bit.
- * 	10:8	Function number
- * 	 7:2	Register number
- *
- * Type 1:
- *
- *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
- *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
- * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- *
- *	31:24	reserved
- *	23:16	bus number (8 bits = 128 possible buses)
- *	15:11	Device number (5 bits)
- *	10:8	function number
- *	 7:2	register number
- *  
- * Notes:
- *	The function number selects which function of a multi-function device 
- *	(e.g., SCSI and Ethernet).
- * 
- *	The register selects a DWORD (32 bit) register offset.  Hence it
- *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
- *	bits.
- */
-
-static int
-mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
-	     unsigned long *pci_addr)
-{
-	unsigned long addr;
-	u8 bus = pbus->number;
-
-	if (bus == 0) {
-		int device = device_fn >> 3;
-		int func = device_fn & 0x7;
-
-		/* Type 0 configuration cycle.  */
-
-		if (device > 12) {
-			return -1;
-		}
-
-		*(vulp)LCA_IOC_CONF = 0;
-		addr = (1 << (11 + device)) | (func << 8) | where;
-	} else {
-		/* Type 1 configuration cycle.  */
-		*(vulp)LCA_IOC_CONF = 1;
-		addr = (bus << 16) | (device_fn << 8) | where;
-	}
-	*pci_addr = addr;
-	return 0;
-}
-
-static unsigned int
-conf_read(unsigned long addr)
-{
-	unsigned long flags, code, stat0;
-	unsigned int value;
-
-	local_irq_save(flags);
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	*(vulp)LCA_IOC_STAT0 = stat0;
-	mb();
-
-	/* Access configuration space.  */
-	value = *(vuip)addr;
-	draina();
-
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	if (stat0 & LCA_IOC_STAT0_ERR) {
-		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
-			& LCA_IOC_STAT0_CODE_MASK);
-		if (code != 1) {
-			printk("lca.c:conf_read: got stat0=%lx\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vulp)LCA_IOC_STAT0 = stat0;
-		mb();
-
-		/* Reset machine check.  */
-		wrmces(0x7);
-
-		value = 0xffffffff;
-	}
-	local_irq_restore(flags);
-	return value;
-}
-
-static void
-conf_write(unsigned long addr, unsigned int value)
-{
-	unsigned long flags, code, stat0;
-
-	local_irq_save(flags);	/* avoid getting hit by machine check */
-
-	/* Reset status register to avoid losing errors.  */
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	*(vulp)LCA_IOC_STAT0 = stat0;
-	mb();
-
-	/* Access configuration space.  */
-	*(vuip)addr = value;
-	draina();
-
-	stat0 = *(vulp)LCA_IOC_STAT0;
-	if (stat0 & LCA_IOC_STAT0_ERR) {
-		code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT)
-			& LCA_IOC_STAT0_CODE_MASK);
-		if (code != 1) {
-			printk("lca.c:conf_write: got stat0=%lx\n", stat0);
-		}
-
-		/* Reset error status.  */
-		*(vulp)LCA_IOC_STAT0 = stat0;
-		mb();
-
-		/* Reset machine check. */
-		wrmces(0x7);
-	}
-	local_irq_restore(flags);
-}
-
-static int
-lca_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-	int shift;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = (where & 3) * 8;
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + LCA_CONF;
-	*value = conf_read(addr) >> (shift);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int 
-lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
-		 u32 value)
-{
-	unsigned long addr, pci_addr;
-	long mask;
-
-	if (mk_conf_addr(bus, devfn, where, &pci_addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	mask = (size - 1) * 8;
-	addr = (pci_addr << 5) + mask + LCA_CONF;
-	conf_write(addr, value << ((where & 3) * 8));
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops lca_pci_ops = 
-{
-	.read =		lca_read_config,
-	.write =	lca_write_config,
-};
-
-void
-lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
-{
-	wmb();
-	*(vulp)LCA_IOC_TBIA = 0;
-	mb();
-}
-
-void __init
-lca_init_arch(void)
-{
-	struct pci_controller *hose;
-
-	/*
-	 * Create our single hose.
-	 */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR;
-	hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR;
-	hose->sparse_io_base = LCA_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	/*
-	 * Set up the PCI to main memory translation windows.
-	 *
-	 * Mimic the SRM settings for the direct-map window.
-	 *   Window 0 is scatter-gather 8MB at 8MB (for isa).
-	 *   Window 1 is direct access 1GB at 1GB.
-	 *
-	 * Note that we do not try to save any of the DMA window CSRs
-	 * before setting them, since we cannot read those CSRs on LCA.
-	 */
-	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
-				       SMP_CACHE_BYTES);
-	hose->sg_pci = NULL;
-	__direct_map_base = 0x40000000;
-	__direct_map_size = 0x40000000;
-
-	*(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32);
-	*(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes);
-
-	*(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32);
-	*(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000;
-	*(vulp)LCA_IOC_T_BASE1 = 0;
-
-	*(vulp)LCA_IOC_TB_ENA = 0x80;
-
-	lca_pci_tbi(hose, 0, -1);
-
-	/*
-	 * Disable PCI parity for now.  The NCR53c810 chip has
-	 * troubles meeting the PCI spec which results in
-	 * data parity errors.
-	 */
-	*(vulp)LCA_IOC_PAR_DIS = 1UL<<5;
-
-	/*
-	 * Finally, set up for restoring the correct HAE if using SRM.
-	 * Again, since we cannot read many of the CSRs on the LCA,
-	 * one of which happens to be the HAE, we save the value that
-	 * the SRM will expect...
-	 */
-	if (alpha_using_srm)
-		srm_hae = 0x80000000UL;
-}
-
-/*
- * Constants used during machine-check handling.  I suppose these
- * could be moved into lca.h but I don't see much reason why anybody
- * else would want to use them.
- */
-
-#define ESR_EAV		(1UL<< 0)	/* error address valid */
-#define ESR_CEE		(1UL<< 1)	/* correctable error */
-#define ESR_UEE		(1UL<< 2)	/* uncorrectable error */
-#define ESR_WRE		(1UL<< 3)	/* write-error */
-#define ESR_SOR		(1UL<< 4)	/* error source */
-#define ESR_CTE		(1UL<< 7)	/* cache-tag error */
-#define ESR_MSE		(1UL<< 9)	/* multiple soft errors */
-#define ESR_MHE		(1UL<<10)	/* multiple hard errors */
-#define ESR_NXM		(1UL<<12)	/* non-existent memory */
-
-#define IOC_ERR		(  1<<4)	/* ioc logs an error */
-#define IOC_CMD_SHIFT	0
-#define IOC_CMD		(0xf<<IOC_CMD_SHIFT)
-#define IOC_CODE_SHIFT	8
-#define IOC_CODE	(0xf<<IOC_CODE_SHIFT)
-#define IOC_LOST	(  1<<5)
-#define IOC_P_NBR	((__u32) ~((1<<13) - 1))
-
-static void
-mem_error(unsigned long esr, unsigned long ear)
-{
-	printk("    %s %s error to %s occurred at address %x\n",
-	       ((esr & ESR_CEE) ? "Correctable" :
-		(esr & ESR_UEE) ? "Uncorrectable" : "A"),
-	       (esr & ESR_WRE) ? "write" : "read",
-	       (esr & ESR_SOR) ? "memory" : "b-cache",
-	       (unsigned) (ear & 0x1ffffff8));
-	if (esr & ESR_CTE) {
-		printk("    A b-cache tag parity error was detected.\n");
-	}
-	if (esr & ESR_MSE) {
-		printk("    Several other correctable errors occurred.\n");
-	}
-	if (esr & ESR_MHE) {
-		printk("    Several other uncorrectable errors occurred.\n");
-	}
-	if (esr & ESR_NXM) {
-		printk("    Attempted to access non-existent memory.\n");
-	}
-}
-
-static void
-ioc_error(__u32 stat0, __u32 stat1)
-{
-	static const char * const pci_cmd[] = {
-		"Interrupt Acknowledge", "Special", "I/O Read", "I/O Write",
-		"Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3",
-		"Rsvd4", "Configuration Read", "Configuration Write",
-		"Memory Read Multiple", "Dual Address", "Memory Read Line",
-		"Memory Write and Invalidate"
-	};
-	static const char * const err_name[] = {
-		"exceeded retry limit", "no device", "bad data parity",
-		"target abort", "bad address parity", "page table read error",
-		"invalid page", "data error"
-	};
-	unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT;
-	unsigned cmd  = (stat0 & IOC_CMD)  >> IOC_CMD_SHIFT;
-
-	printk("    %s initiated PCI %s cycle to address %x"
-	       " failed due to %s.\n",
-	       code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]);
-
-	if (code == 5 || code == 6) {
-		printk("    (Error occurred at PCI memory address %x.)\n",
-		       (stat0 & ~IOC_P_NBR));
-	}
-	if (stat0 & IOC_LOST) {
-		printk("    Other PCI errors occurred simultaneously.\n");
-	}
-}
-
-void
-lca_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-	const char * reason;
-	union el_lca el;
-
-	el.c = (struct el_common *) la_ptr;
-
-	wrmces(rdmces());	/* reset machine check pending flag */
-
-	printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n",
-	       vector, get_irq_regs()->pc, (unsigned int) el.c->code);
-
-	/*
-	 * The first quadword after the common header always seems to
-	 * be the machine check reason---don't know why this isn't
-	 * part of the common header instead.  In the case of a long
-	 * logout frame, the upper 32 bits is the machine check
-	 * revision level, which we ignore for now.
-	 */
-	switch ((unsigned int) el.c->code) {
-	case MCHK_K_TPERR:	reason = "tag parity error"; break;
-	case MCHK_K_TCPERR:	reason = "tag control parity error"; break;
-	case MCHK_K_HERR:	reason = "access to non-existent memory"; break;
-	case MCHK_K_ECC_C:	reason = "correctable ECC error"; break;
-	case MCHK_K_ECC_NC:	reason = "non-correctable ECC error"; break;
-	case MCHK_K_CACKSOFT:	reason = "MCHK_K_CACKSOFT"; break;
-	case MCHK_K_BUGCHECK:	reason = "illegal exception in PAL mode"; break;
-	case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break;
-	case MCHK_K_DCPERR:	reason = "d-cache parity error"; break;
-	case MCHK_K_ICPERR:	reason = "i-cache parity error"; break;
-	case MCHK_K_SIO_SERR:	reason = "SIO SERR occurred on PCI bus"; break;
-	case MCHK_K_SIO_IOCHK:	reason = "SIO IOCHK occurred on ISA bus"; break;
-	case MCHK_K_DCSR:	reason = "MCHK_K_DCSR"; break;
-	case MCHK_K_UNKNOWN:
-	default:		reason = "unknown"; break;
-	}
-
-	switch (el.c->size) {
-	case sizeof(struct el_lca_mcheck_short):
-		printk(KERN_CRIT
-		       "  Reason: %s (short frame%s, dc_stat=%#lx):\n",
-		       reason, el.c->retry ? ", retryable" : "",
-		       el.s->dc_stat);
-		if (el.s->esr & ESR_EAV) {
-			mem_error(el.s->esr, el.s->ear);
-		}
-		if (el.s->ioc_stat0 & IOC_ERR) {
-			ioc_error(el.s->ioc_stat0, el.s->ioc_stat1);
-		}
-		break;
-
-	case sizeof(struct el_lca_mcheck_long):
-		printk(KERN_CRIT "  Reason: %s (long frame%s):\n",
-		       reason, el.c->retry ? ", retryable" : "");
-		printk(KERN_CRIT
-		       "    reason: %#lx  exc_addr: %#lx  dc_stat: %#lx\n", 
-		       el.l->pt[0], el.l->exc_addr, el.l->dc_stat);
-		printk(KERN_CRIT "    car: %#lx\n", el.l->car);
-		if (el.l->esr & ESR_EAV) {
-			mem_error(el.l->esr, el.l->ear);
-		}
-		if (el.l->ioc_stat0 & IOC_ERR) {
-			ioc_error(el.l->ioc_stat0, el.l->ioc_stat1);
-		}
-		break;
-
-	default:
-		printk(KERN_CRIT "  Unknown errorlog size %d\n", el.c->size);
-	}
-
-	/* Dump the logout area to give all info.  */
-#ifdef CONFIG_VERBOSE_MCHECK
-	if (alpha_verbose_mcheck > 1) {
-		unsigned long * ptr = (unsigned long *) la_ptr;
-		long i;
-		for (i = 0; i < el.c->size / sizeof(long); i += 2) {
-			printk(KERN_CRIT " +%8lx %016lx %016lx\n",
-			       i*sizeof(long), ptr[i], ptr[i+1]);
-		}
-	}
-#endif /* CONFIG_VERBOSE_MCHECK */
-}
-
-/*
- * The following routines are needed to support the SPEED changing
- * necessary to successfully manage the thermal problem on the AlphaBook1.
- */
-
-void
-lca_clock_print(void)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-
-        printk("Status of clock control:\n");
-        printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg));
-        printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg));
-        printk("\tInterrupt override is %s\n",
-	       (pmr_reg & LCA_PMR_INTO) ? "on" : "off"); 
-        printk("\tDMA override is %s\n",
-	       (pmr_reg & LCA_PMR_DMAO) ? "on" : "off"); 
-
-}
-
-int
-lca_get_clock(void)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-        return(LCA_GET_PRIMARY(pmr_reg));
-
-}
-
-void
-lca_clock_fiddle(int divisor)
-{
-        long    pmr_reg;
-
-        pmr_reg = LCA_READ_PMR;
-        LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor);
-	/* lca_norm_clock = divisor; */
-        LCA_WRITE_PMR(pmr_reg);
-        mb();
-}
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index 1db9d0eb2922..d38f4d6759e4 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -17,13 +17,13 @@
 #include <linux/vmalloc.h>
 #include <linux/mc146818rtc.h>
 #include <linux/rtc.h>
+#include <linux/string.h>
 #include <linux/module.h>
 #include <linux/memblock.h>
 
 #include <asm/ptrace.h>
 #include <asm/smp.h>
 #include <asm/gct.h>
-#include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/vga.h>
 
@@ -80,13 +80,12 @@ mk_resource_name(int pe, int port, char *str)
 {
 	char tmp[80];
 	char *name;
-	
-	sprintf(tmp, "PCI %s PE %d PORT %d", str, pe, port);
-	name = memblock_alloc(strlen(tmp) + 1, SMP_CACHE_BYTES);
-	if (!name)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      strlen(tmp) + 1);
-	strcpy(name, tmp);
+	size_t sz;
+
+	sz = scnprintf(tmp, sizeof(tmp), "PCI %s PE %d PORT %d", str, pe, port);
+	sz += 1; /* NUL terminator */
+	name = memblock_alloc_or_panic(sz, SMP_CACHE_BYTES);
+	strscpy(name, tmp, sz);
 
 	return name;
 }
@@ -120,10 +119,7 @@ alloc_io7(unsigned int pe)
 		return NULL;
 	}
 
-	io7 = memblock_alloc(sizeof(*io7), SMP_CACHE_BYTES);
-	if (!io7)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*io7));
+	io7 = memblock_alloc_or_panic(sizeof(*io7), SMP_CACHE_BYTES);
 	io7->pe = pe;
 	raw_spin_lock_init(&io7->irq_lock);
 
@@ -288,8 +284,7 @@ io7_init_hose(struct io7 *io7, int port)
 	/*
 	 * Set up window 0 for scatter-gather 8MB at 8MB.
 	 */
-	hose->sg_isa = iommu_arena_new_node(marvel_cpuid_to_nid(io7->pe),
-					    hose, 0x00800000, 0x00800000, 0);
+	hose->sg_isa = iommu_arena_new_node(0, hose, 0x00800000, 0x00800000, 0);
 	hose->sg_isa->align_entry = 8;	/* cache line boundary */
 	csrs->POx_WBASE[0].csr = 
 		hose->sg_isa->dma_base | wbase_m_ena | wbase_m_sg;
@@ -306,8 +301,7 @@ io7_init_hose(struct io7 *io7, int port)
 	/*
 	 * Set up window 2 for scatter-gather (up-to) 1GB at 3GB.
 	 */
-	hose->sg_pci = iommu_arena_new_node(marvel_cpuid_to_nid(io7->pe),
-					    hose, 0xc0000000, 0x40000000, 0);
+	hose->sg_pci = iommu_arena_new_node(0, hose, 0xc0000000, 0x40000000, 0);
 	hose->sg_pci->align_entry = 8;	/* cache line boundary */
 	csrs->POx_WBASE[2].csr = 
 		hose->sg_pci->dma_base | wbase_m_ena | wbase_m_sg;
@@ -358,7 +352,7 @@ marvel_init_io7(struct io7 *io7)
 	}
 }
 
-void __init
+static void __init
 marvel_io7_present(gct6_node *node)
 {
 	int pe;
@@ -806,8 +800,8 @@ void __iomem *marvel_ioportmap (unsigned long addr)
 	return (void __iomem *)addr;
 }
 
-unsigned int
-marvel_ioread8(void __iomem *xaddr)
+u8
+marvel_ioread8(const void __iomem *xaddr)
 {
 	unsigned long addr = (unsigned long) xaddr;
 	if (__marvel_is_port_kbd(addr))
@@ -844,53 +838,8 @@ EXPORT_SYMBOL(marvel_ioportmap);
 EXPORT_SYMBOL(marvel_ioread8);
 EXPORT_SYMBOL(marvel_iowrite8);
 #endif
-
-/*
- * NUMA Support
- */
-/**********
- * FIXME - for now each cpu is a node by itself 
- *              -- no real support for striped mode 
- **********
- */
-int
-marvel_pa_to_nid(unsigned long pa)
-{
-	int cpuid;
-
-	if ((pa >> 43) & 1) 	/* I/O */ 
-		cpuid = (~(pa >> 35) & 0xff);
-	else			/* mem */
-		cpuid = ((pa >> 34) & 0x3) | ((pa >> (37 - 2)) & (0x1f << 2));
 
-	return marvel_cpuid_to_nid(cpuid);
-}
-
-int
-marvel_cpuid_to_nid(int cpuid)
-{
-	return cpuid;
-}
-
-unsigned long
-marvel_node_mem_start(int nid)
-{
-	unsigned long pa;
-
-	pa = (nid & 0x3) | ((nid & (0x1f << 2)) << 1);
-	pa <<= 34;
-
-	return pa;
-}
-
-unsigned long
-marvel_node_mem_size(int nid)
-{
-	return 16UL * 1024 * 1024 * 1024; /* 16GB */
-}
-
-
-/* 
+/*
  * AGP GART Support.
  */
 #include <linux/agp_backend.h>
diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c
index 98d5b6ff8a76..3d72d90624f1 100644
--- a/arch/alpha/kernel/core_t2.c
+++ b/arch/alpha/kernel/core_t2.c
@@ -10,7 +10,7 @@
  * Code common to all T2 core logic chips.
  */
 
-#define __EXTERN_INLINE
+#define __EXTERN_INLINE inline
 #include <asm/io.h>
 #include <asm/core_t2.h>
 #undef __EXTERN_INLINE
diff --git a/arch/alpha/kernel/core_titan.c b/arch/alpha/kernel/core_titan.c
index 2a2820fb1be6..77f5d68ed04b 100644
--- a/arch/alpha/kernel/core_titan.c
+++ b/arch/alpha/kernel/core_titan.c
@@ -20,7 +20,6 @@
 
 #include <asm/ptrace.h>
 #include <asm/smp.h>
-#include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/vga.h>
 
diff --git a/arch/alpha/kernel/core_wildfire.c b/arch/alpha/kernel/core_wildfire.c
index e8d3b033018d..8dd08c5e4270 100644
--- a/arch/alpha/kernel/core_wildfire.c
+++ b/arch/alpha/kernel/core_wildfire.c
@@ -59,7 +59,7 @@ unsigned long wildfire_pca_mask;
 unsigned long wildfire_cpu_mask;
 unsigned long wildfire_mem_mask;
 
-void __init
+static void __init
 wildfire_init_hose(int qbbno, int hoseno)
 {
 	struct pci_controller *hose;
@@ -137,7 +137,7 @@ wildfire_init_hose(int qbbno, int hoseno)
 	wildfire_pci_tbi(hose, 0, 0); /* Flush TLB at the end. */
 }
 
-void __init
+static void __init
 wildfire_init_pca(int qbbno, int pcano)
 {
 
@@ -154,7 +154,7 @@ wildfire_init_pca(int qbbno, int pcano)
 	wildfire_init_hose(qbbno, (pcano << 1) + 1);
 }
 
-void __init
+static void __init
 wildfire_init_qbb(int qbbno)
 {
 	int pcano;
@@ -176,7 +176,7 @@ wildfire_init_qbb(int qbbno)
 	}
 }
 
-void __init
+static void __init
 wildfire_hardware_probe(void)
 {
 	unsigned long temp;
@@ -434,39 +434,12 @@ wildfire_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-struct pci_ops wildfire_pci_ops = 
+struct pci_ops wildfire_pci_ops =
 {
 	.read =		wildfire_read_config,
 	.write =	wildfire_write_config,
 };
 
-
-/*
- * NUMA Support
- */
-int wildfire_pa_to_nid(unsigned long pa)
-{
-	return pa >> 36;
-}
-
-int wildfire_cpuid_to_nid(int cpuid)
-{
-	/* assume 4 CPUs per node */
-	return cpuid >> 2;
-}
-
-unsigned long wildfire_node_mem_start(int nid)
-{
-	/* 64GB per node */
-	return (unsigned long)nid * (64UL * 1024 * 1024 * 1024);
-}
-
-unsigned long wildfire_node_mem_size(int nid)
-{
-	/* 64GB per node */
-	return 64UL * 1024 * 1024 * 1024;
-}
-
 #if DEBUG_DUMP_REGS
 
 static void __init
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index 2e09248f8324..f4d41b4538c2 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -15,10 +15,6 @@
 	.set noat
 	.cfi_sections	.debug_frame
 
-/* Stack offsets.  */
-#define SP_OFF			184
-#define SWITCH_STACK_SIZE	320
-
 .macro	CFI_START_OSF_FRAME	func
 	.align	4
 	.globl	\func
@@ -159,7 +155,6 @@
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	/* We don't really care about the FP registers for debugging.  */
 .endm
 
 .macro	UNDO_SWITCH_STACK
@@ -199,8 +194,8 @@ CFI_END_OSF_FRAME entArith
 CFI_START_OSF_FRAME entMM
 	SAVE_ALL
 /* save $9 - $15 so the inline exception code can manipulate them.  */
-	subq	$sp, 56, $sp
-	.cfi_adjust_cfa_offset	56
+	subq	$sp, 64, $sp
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -215,7 +210,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_rel_offset	$13, 32
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 /* handle the fault */
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
@@ -228,7 +223,7 @@ CFI_START_OSF_FRAME entMM
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	addq	$sp, 56, $sp
+	addq	$sp, 64, $sp
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -236,7 +231,7 @@ CFI_START_OSF_FRAME entMM
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 /* finish up the syscall as normal.  */
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entMM
@@ -383,8 +378,8 @@ entUnaUser:
 	.cfi_restore	$0
 	.cfi_adjust_cfa_offset	-256
 	SAVE_ALL		/* setup normal kernel stack */
-	lda	$sp, -56($sp)
-	.cfi_adjust_cfa_offset	56
+	lda	$sp, -64($sp)
+	.cfi_adjust_cfa_offset	64
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -400,7 +395,7 @@ entUnaUser:
 	.cfi_rel_offset	$14, 40
 	.cfi_rel_offset	$15, 48
 	lda	$8, 0x3fff
-	addq	$sp, 56, $19
+	addq	$sp, 64, $19
 	bic	$sp, $8, $8
 	jsr	$26, do_entUnaUser
 	ldq	$9, 0($sp)
@@ -410,7 +405,7 @@ entUnaUser:
 	ldq	$13, 32($sp)
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
-	lda	$sp, 56($sp)
+	lda	$sp, 64($sp)
 	.cfi_restore	$9
 	.cfi_restore	$10
 	.cfi_restore	$11
@@ -418,7 +413,7 @@ entUnaUser:
 	.cfi_restore	$13
 	.cfi_restore	$14
 	.cfi_restore	$15
-	.cfi_adjust_cfa_offset	-56
+	.cfi_adjust_cfa_offset	-64
 	br	ret_from_sys_call
 CFI_END_OSF_FRAME entUna
 
@@ -454,7 +449,7 @@ entSys:
 	SAVE_ALL
 	lda	$8, 0x3fff
 	bic	$sp, $8, $8
-	lda	$4, NR_SYSCALLS($31)
+	lda	$4, NR_syscalls($31)
 	stq	$16, SP_OFF+24($sp)
 	lda	$5, sys_call_table
 	lda	$27, sys_ni_syscall
@@ -469,13 +464,16 @@ entSys:
 #ifdef CONFIG_AUDITSYSCALL
 	lda     $6, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
 	and     $3, $6, $3
-#endif
 	bne     $3, strace
+#else
+	blbs    $3, strace		/* check for SYSCALL_TRACE in disguise */
+#endif
 	beq	$4, 1f
 	ldq	$27, 0($5)
 1:	jsr	$26, ($27), sys_ni_syscall
 	ldgp	$gp, 0($26)
 	blt	$0, $syscall_error	/* the call failed */
+$ret_success:
 	stq	$0, 0($sp)
 	stq	$31, 72($sp)		/* a3=0 => no error */
 
@@ -495,6 +493,10 @@ ret_to_user:
 	and	$17, _TIF_WORK_MASK, $2
 	bne	$2, work_pending
 restore_all:
+	ldl	$2, TI_STATUS($8)
+	and	$2, TS_SAVED_FP | TS_RESTORE_FP, $3
+	bne	$3, restore_fpu
+restore_other:
 	.cfi_remember_state
 	RESTORE_ALL
 	call_pal PAL_rti
@@ -503,7 +505,7 @@ ret_to_kernel:
 	.cfi_restore_state
 	lda	$16, 7
 	call_pal PAL_swpipl
-	br restore_all
+	br restore_other
 
 	.align 3
 $syscall_error:
@@ -525,11 +527,6 @@ $syscall_error:
 	stq	$1, 72($sp)	/* a3 for return */
 	br	ret_from_sys_call
 
-$ret_success:
-	stq	$0, 0($sp)
-	stq	$31, 72($sp)	/* a3=0 => no error */
-	br	ret_from_sys_call
-
 /*
  * Do all cleanup when returning from all interrupts and system calls.
  *
@@ -544,7 +541,7 @@ $ret_success:
 	.align	4
 	.type	work_pending, @function
 work_pending:
-	and	$17, _TIF_NOTIFY_RESUME | _TIF_SIGPENDING, $2
+	and	$17, _TIF_NOTIFY_RESUME | _TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL, $2
 	bne	$2, $work_notifysig
 
 $work_resched:
@@ -572,6 +569,14 @@ $work_notifysig:
 	.type	strace, @function
 strace:
 	/* set up signal stack, call syscall_trace */
+	// NB: if anyone adds preemption, this block will need to be protected
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_SAVED_FP, $3
+	or	$1, TS_SAVED_FP, $2
+	bne	$3, 1f
+	stl	$2, TI_STATUS($8)
+	bsr	$26, __save_fpu
+1:
 	DO_SWITCH_STACK
 	jsr	$26, syscall_trace_enter /* returns the syscall number */
 	UNDO_SWITCH_STACK
@@ -585,7 +590,7 @@ strace:
 	ldq	$21, 88($sp)
 
 	/* get the system call pointer.. */
-	lda	$1, NR_SYSCALLS($31)
+	lda	$1, NR_syscalls($31)
 	lda	$2, sys_call_table
 	lda	$27, sys_ni_syscall
 	cmpult	$0, $1, $1
@@ -598,8 +603,8 @@ ret_from_straced:
 
 	/* check return.. */
 	blt	$0, $strace_error	/* the call failed */
-	stq	$31, 72($sp)		/* a3=0 => no error */
 $strace_success:
+	stq	$31, 72($sp)		/* a3=0 => no error */
 	stq	$0, 0($sp)		/* save return value */
 
 	DO_SWITCH_STACK
@@ -651,40 +656,6 @@ do_switch_stack:
 	stq	$14, 40($sp)
 	stq	$15, 48($sp)
 	stq	$26, 56($sp)
-	stt	$f0, 64($sp)
-	stt	$f1, 72($sp)
-	stt	$f2, 80($sp)
-	stt	$f3, 88($sp)
-	stt	$f4, 96($sp)
-	stt	$f5, 104($sp)
-	stt	$f6, 112($sp)
-	stt	$f7, 120($sp)
-	stt	$f8, 128($sp)
-	stt	$f9, 136($sp)
-	stt	$f10, 144($sp)
-	stt	$f11, 152($sp)
-	stt	$f12, 160($sp)
-	stt	$f13, 168($sp)
-	stt	$f14, 176($sp)
-	stt	$f15, 184($sp)
-	stt	$f16, 192($sp)
-	stt	$f17, 200($sp)
-	stt	$f18, 208($sp)
-	stt	$f19, 216($sp)
-	stt	$f20, 224($sp)
-	stt	$f21, 232($sp)
-	stt	$f22, 240($sp)
-	stt	$f23, 248($sp)
-	stt	$f24, 256($sp)
-	stt	$f25, 264($sp)
-	stt	$f26, 272($sp)
-	stt	$f27, 280($sp)
-	mf_fpcr	$f0		# get fpcr
-	stt	$f28, 288($sp)
-	stt	$f29, 296($sp)
-	stt	$f30, 304($sp)
-	stt	$f0, 312($sp)	# save fpcr in slot of $f31
-	ldt	$f0, 64($sp)	# dont let "do_switch_stack" change fp state.
 	ret	$31, ($1), 1
 	.cfi_endproc
 	.size	do_switch_stack, .-do_switch_stack
@@ -703,54 +674,71 @@ undo_switch_stack:
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
 	ldq	$26, 56($sp)
-	ldt	$f30, 312($sp)	# get saved fpcr
-	ldt	$f0, 64($sp)
-	ldt	$f1, 72($sp)
-	ldt	$f2, 80($sp)
-	ldt	$f3, 88($sp)
-	mt_fpcr	$f30		# install saved fpcr
-	ldt	$f4, 96($sp)
-	ldt	$f5, 104($sp)
-	ldt	$f6, 112($sp)
-	ldt	$f7, 120($sp)
-	ldt	$f8, 128($sp)
-	ldt	$f9, 136($sp)
-	ldt	$f10, 144($sp)
-	ldt	$f11, 152($sp)
-	ldt	$f12, 160($sp)
-	ldt	$f13, 168($sp)
-	ldt	$f14, 176($sp)
-	ldt	$f15, 184($sp)
-	ldt	$f16, 192($sp)
-	ldt	$f17, 200($sp)
-	ldt	$f18, 208($sp)
-	ldt	$f19, 216($sp)
-	ldt	$f20, 224($sp)
-	ldt	$f21, 232($sp)
-	ldt	$f22, 240($sp)
-	ldt	$f23, 248($sp)
-	ldt	$f24, 256($sp)
-	ldt	$f25, 264($sp)
-	ldt	$f26, 272($sp)
-	ldt	$f27, 280($sp)
-	ldt	$f28, 288($sp)
-	ldt	$f29, 296($sp)
-	ldt	$f30, 304($sp)
 	lda	$sp, SWITCH_STACK_SIZE($sp)
 	ret	$31, ($1), 1
 	.cfi_endproc
 	.size	undo_switch_stack, .-undo_switch_stack
+
+#define FR(n) n * 8 + TI_FP($8)
+	.align	4
+	.globl	__save_fpu
+	.type	__save_fpu, @function
+__save_fpu:
+#define V(n) stt	$f##n, FR(n)
+	V( 0); V( 1); V( 2); V( 3)
+	V( 4); V( 5); V( 6); V( 7)
+	V( 8); V( 9); V(10); V(11)
+	V(12); V(13); V(14); V(15)
+	V(16); V(17); V(18); V(19)
+	V(20); V(21); V(22); V(23)
+	V(24); V(25); V(26); V(27)
+	mf_fpcr	$f0		# get fpcr
+	V(28); V(29); V(30)
+	stt	$f0, FR(31)	# save fpcr in slot of $f31
+	ldt	$f0, FR(0)	# don't let "__save_fpu" change fp state.
+	ret
+#undef V
+	.size	__save_fpu, .-__save_fpu
+
+	.align	4
+restore_fpu:
+	and	$3, TS_RESTORE_FP, $3
+	bic	$2, TS_SAVED_FP | TS_RESTORE_FP, $2
+	beq	$3, 1f
+#define V(n) ldt	$f##n, FR(n)
+	ldt	$f30, FR(31)	# get saved fpcr
+	V( 0); V( 1); V( 2); V( 3)
+	mt_fpcr	$f30		# install saved fpcr
+	V( 4); V( 5); V( 6); V( 7)
+	V( 8); V( 9); V(10); V(11)
+	V(12); V(13); V(14); V(15)
+	V(16); V(17); V(18); V(19)
+	V(20); V(21); V(22); V(23)
+	V(24); V(25); V(26); V(27)
+	V(28); V(29); V(30)
+1:	stl $2, TI_STATUS($8)
+	br restore_other
+#undef V
+
 
 /*
  * The meat of the context switch code.
  */
-
 	.align	4
 	.globl	alpha_switch_to
 	.type	alpha_switch_to, @function
 	.cfi_startproc
 alpha_switch_to:
 	DO_SWITCH_STACK
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_RESTORE_FP, $3
+	bne	$3, 1f
+	or	$1, TS_RESTORE_FP | TS_SAVED_FP, $2
+	and	$1, TS_SAVED_FP, $3
+	stl	$2, TI_STATUS($8)
+	bne	$3, 1f
+	bsr	$26, __save_fpu
+1:
 	call_pal PAL_swpctx
 	lda	$8, 0x3fff
 	UNDO_SWITCH_STACK
@@ -768,7 +756,7 @@ alpha_switch_to:
 	.align	4
 	.ent	ret_from_fork
 ret_from_fork:
-	lda	$26, ret_from_sys_call
+	lda	$26, ret_to_user
 	mov	$17, $16
 	jmp	$31, schedule_tail
 .end ret_from_fork
@@ -801,6 +789,14 @@ ret_from_kernel_thread:
 alpha_\name:
 	.prologue 0
 	bsr	$1, do_switch_stack
+	// NB: if anyone adds preemption, this block will need to be protected
+	ldl	$1, TI_STATUS($8)
+	and	$1, TS_SAVED_FP, $3
+	or	$1, TS_SAVED_FP, $2
+	bne	$3, 1f
+	stl	$2, TI_STATUS($8)
+	bsr	$26, __save_fpu
+1:
 	jsr	$26, sys_\name
 	ldq	$26, 56($sp)
 	lda	$sp, SWITCH_STACK_SIZE($sp)
@@ -811,6 +807,7 @@ alpha_\name:
 fork_like fork
 fork_like vfork
 fork_like clone
+fork_like clone3
 
 .macro	sigreturn_like name
 	.align	4
diff --git a/arch/alpha/kernel/io.c b/arch/alpha/kernel/io.c
index c025a3e5e357..c28035d6d1e6 100644
--- a/arch/alpha/kernel/io.c
+++ b/arch/alpha/kernel/io.c
@@ -14,23 +14,38 @@
    "generic", which bumps through the machine vector.  */
 
 unsigned int
-ioread8(void __iomem *addr)
+ioread8(const void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread8)(addr);
 	mb();
 	return ret;
 }
 
-unsigned int ioread16(void __iomem *addr)
+unsigned int ioread16(const void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread16)(addr);
 	mb();
 	return ret;
 }
 
-unsigned int ioread32(void __iomem *addr)
+unsigned int ioread32(const void __iomem *addr)
 {
-	unsigned int ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread32)(addr);
+	mb();
+	return ret;
+}
+
+u64 ioread64(const void __iomem *addr)
+{
+	unsigned int ret;
+	mb();
+	ret = IO_CONCAT(__IO_PREFIX,ioread64)(addr);
 	mb();
 	return ret;
 }
@@ -53,12 +68,20 @@ void iowrite32(u32 b, void __iomem *addr)
 	IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
 }
 
+void iowrite64(u64 b, void __iomem *addr)
+{
+	mb();
+	IO_CONCAT(__IO_PREFIX,iowrite64)(b, addr);
+}
+
 EXPORT_SYMBOL(ioread8);
 EXPORT_SYMBOL(ioread16);
 EXPORT_SYMBOL(ioread32);
+EXPORT_SYMBOL(ioread64);
 EXPORT_SYMBOL(iowrite8);
 EXPORT_SYMBOL(iowrite16);
 EXPORT_SYMBOL(iowrite32);
+EXPORT_SYMBOL(iowrite64);
 
 u8 inb(unsigned long port)
 {
@@ -148,28 +171,36 @@ EXPORT_SYMBOL(__raw_writeq);
 
 u8 readb(const volatile void __iomem *addr)
 {
-	u8 ret = __raw_readb(addr);
+	u8 ret;
+	mb();
+	ret = __raw_readb(addr);
 	mb();
 	return ret;
 }
 
 u16 readw(const volatile void __iomem *addr)
 {
-	u16 ret = __raw_readw(addr);
+	u16 ret;
+	mb();
+	ret = __raw_readw(addr);
 	mb();
 	return ret;
 }
 
 u32 readl(const volatile void __iomem *addr)
 {
-	u32 ret = __raw_readl(addr);
+	u32 ret;
+	mb();
+	ret = __raw_readl(addr);
 	mb();
 	return ret;
 }
 
 u64 readq(const volatile void __iomem *addr)
 {
-	u64 ret = __raw_readq(addr);
+	u64 ret;
+	mb();
+	ret = __raw_readq(addr);
 	mb();
 	return ret;
 }
@@ -207,11 +238,43 @@ EXPORT_SYMBOL(writew);
 EXPORT_SYMBOL(writel);
 EXPORT_SYMBOL(writeq);
 
+/*
+ * The _relaxed functions must be ordered w.r.t. each other, but they don't
+ * have to be ordered w.r.t. other memory accesses.
+ */
+u8 readb_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readb(addr);
+}
+
+u16 readw_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readw(addr);
+}
+
+u32 readl_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readl(addr);
+}
+
+u64 readq_relaxed(const volatile void __iomem *addr)
+{
+	mb();
+	return __raw_readq(addr);
+}
+
+EXPORT_SYMBOL(readb_relaxed);
+EXPORT_SYMBOL(readw_relaxed);
+EXPORT_SYMBOL(readl_relaxed);
+EXPORT_SYMBOL(readq_relaxed);
 
 /*
  * Read COUNT 8-bit bytes from port PORT into memory starting at SRC.
  */
-void ioread8_rep(void __iomem *port, void *dst, unsigned long count)
+void ioread8_rep(const void __iomem *port, void *dst, unsigned long count)
 {
 	while ((unsigned long)dst & 0x3) {
 		if (!count)
@@ -254,7 +317,7 @@ EXPORT_SYMBOL(insb);
  * the interfaces seems to be slow: just using the inlined version
  * of the inw() breaks things.
  */
-void ioread16_rep(void __iomem *port, void *dst, unsigned long count)
+void ioread16_rep(const void __iomem *port, void *dst, unsigned long count)
 {
 	if (unlikely((unsigned long)dst & 0x3)) {
 		if (!count)
@@ -294,7 +357,7 @@ EXPORT_SYMBOL(insw);
  * but the interfaces seems to be slow: just using the inlined version
  * of the inl() breaks things.
  */
-void ioread32_rep(void __iomem *port, void *dst, unsigned long count)
+void ioread32_rep(const void __iomem *port, void *dst, unsigned long count)
 {
 	if (unlikely((unsigned long)dst & 0x3)) {
 		while (count--) {
@@ -584,6 +647,10 @@ void _memset_c_io(volatile void __iomem *to, unsigned long c, long count)
 
 EXPORT_SYMBOL(_memset_c_io);
 
+#if IS_ENABLED(CONFIG_VGA_CONSOLE) || IS_ENABLED(CONFIG_MDA_CONSOLE)
+
+#include <asm/vga.h>
+
 /* A version of memcpy used by the vga console routines to move data around
    arbitrarily between screen and main memory.  */
 
@@ -618,6 +685,21 @@ scr_memcpyw(u16 *d, const u16 *s, unsigned int count)
 
 EXPORT_SYMBOL(scr_memcpyw);
 
+void scr_memmovew(u16 *d, const u16 *s, unsigned int count)
+{
+	if (d < s)
+		scr_memcpyw(d, s, count);
+	else {
+		count /= 2;
+		d += count;
+		s += count;
+		while (count--)
+			scr_writew(scr_readw(--s), --d);
+	}
+}
+EXPORT_SYMBOL(scr_memmovew);
+#endif
+
 void __iomem *ioport_map(unsigned long port, unsigned int size)
 {
 	return IO_CONCAT(__IO_PREFIX,ioportmap) (port);
diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c
index f6d2946edbd2..c67047c5d830 100644
--- a/arch/alpha/kernel/irq.c
+++ b/arch/alpha/kernel/irq.c
@@ -28,6 +28,7 @@
 
 #include <asm/io.h>
 #include <linux/uaccess.h>
+#include "irq_impl.h"
 
 volatile unsigned long irq_err_count;
 DEFINE_PER_CPU(unsigned long, irq_pmi_count);
@@ -60,7 +61,7 @@ int irq_select_affinity(unsigned int irq)
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
-	cpumask_copy(irq_data_get_affinity_mask(data), cpumask_of(cpu));
+	irq_data_update_affinity(data, cpumask_of(cpu));
 	chip->irq_set_affinity(data, cpumask_of(cpu), false);
 	return 0;
 }
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index da3e10d5f7fe..d17e44c99df9 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -213,32 +213,13 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
  * The special RTC interrupt type.  The interrupt itself was
  * processed by PALcode, and comes in via entInt vector 1.
  */
-
-struct irqaction timer_irqaction = {
-	.handler	= rtc_timer_interrupt,
-	.name		= "timer",
-};
-
 void __init
-init_rtc_irq(void)
+init_rtc_irq(irq_handler_t handler)
 {
 	irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip,
 				      handle_percpu_irq, "RTC");
-	setup_irq(RTC_IRQ, &timer_irqaction);
+	if (!handler)
+		handler = rtc_timer_interrupt;
+	if (request_irq(RTC_IRQ, handler, 0, "timer", NULL))
+		pr_err("Failed to register timer interrupt\n");
 }
-
-/* Dummy irqactions.  */
-struct irqaction isa_cascade_irqaction = {
-	.handler	= no_action,
-	.name		= "isa-cascade"
-};
-
-struct irqaction timer_cascade_irqaction = {
-	.handler	= no_action,
-	.name		= "timer-cascade"
-};
-
-struct irqaction halt_switch_irqaction = {
-	.handler	= no_action,
-	.name		= "halt-switch"
-};
diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c
index 5d54c076a8ae..29c6c477ac35 100644
--- a/arch/alpha/kernel/irq_i8259.c
+++ b/arch/alpha/kernel/irq_i8259.c
@@ -82,11 +82,6 @@ struct irq_chip i8259a_irq_type = {
 void __init
 init_i8259a_irqs(void)
 {
-	static struct irqaction cascade = {
-		.handler	= no_action,
-		.name		= "cascade",
-	};
-
 	long i;
 
 	outb(0xff, 0x21);	/* mask all of 8259A-1 */
@@ -96,16 +91,13 @@ init_i8259a_irqs(void)
 		irq_set_chip_and_handler(i, &i8259a_irq_type, handle_level_irq);
 	}
 
-	setup_irq(2, &cascade);
+	if (request_irq(2, no_action, 0, "cascade", NULL))
+		pr_err("Failed to request irq 2 (cascade)\n");
 }
 
 
 #if defined(CONFIG_ALPHA_GENERIC)
 # define IACK_SC	alpha_mv.iack_sc
-#elif defined(CONFIG_ALPHA_APECS)
-# define IACK_SC	APECS_IACK_SC
-#elif defined(CONFIG_ALPHA_LCA)
-# define IACK_SC	LCA_IACK_SC
 #elif defined(CONFIG_ALPHA_CIA)
 # define IACK_SC	CIA_IACK_SC
 #elif defined(CONFIG_ALPHA_PYXIS)
diff --git a/arch/alpha/kernel/irq_impl.h b/arch/alpha/kernel/irq_impl.h
index 16f2b0276f3a..fbf21892e66d 100644
--- a/arch/alpha/kernel/irq_impl.h
+++ b/arch/alpha/kernel/irq_impl.h
@@ -21,14 +21,9 @@ extern void isa_no_iack_sc_device_interrupt(unsigned long);
 extern void srm_device_interrupt(unsigned long);
 extern void pyxis_device_interrupt(unsigned long);
 
-extern struct irqaction timer_irqaction;
-extern struct irqaction isa_cascade_irqaction;
-extern struct irqaction timer_cascade_irqaction;
-extern struct irqaction halt_switch_irqaction;
-
 extern void init_srm_irqs(long, unsigned long);
 extern void init_pyxis_irqs(unsigned long);
-extern void init_rtc_irq(void);
+extern void init_rtc_irq(irq_handler_t  handler);
 
 extern void common_init_isa_dma(void);
 
diff --git a/arch/alpha/kernel/irq_pyxis.c b/arch/alpha/kernel/irq_pyxis.c
index a968b10e687d..27070b5bd33e 100644
--- a/arch/alpha/kernel/irq_pyxis.c
+++ b/arch/alpha/kernel/irq_pyxis.c
@@ -107,5 +107,6 @@ init_pyxis_irqs(unsigned long ignore_mask)
 		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 
-	setup_irq(16+7, &isa_cascade_irqaction);
+	if (request_irq(16 + 7, no_action, 0, "isa-cascade", NULL))
+		pr_err("Failed to register isa-cascade interrupt\n");
 }
diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h
index 38f045ec5cd2..129ae36b8e6d 100644
--- a/arch/alpha/kernel/machvec_impl.h
+++ b/arch/alpha/kernel/machvec_impl.h
@@ -7,8 +7,6 @@
  * This file has goodies to help simplify instantiation of machine vectors.
  */
 
-#include <asm/pgalloc.h>
-
 /* Whee.  These systems don't have an HAE:
        IRONGATE, MARVEL, POLARIS, TSUNAMI, TITAN, WILDFIRE
    Fix things up for the GENERIC kernel by defining the HAE address
@@ -46,33 +44,14 @@
 
 #define DO_DEFAULT_RTC			.rtc_port = 0x70
 
-#define DO_EV4_MMU							\
-	.max_asn =			EV4_MAX_ASN,			\
-	.mv_switch_mm =			ev4_switch_mm,			\
-	.mv_activate_mm =		ev4_activate_mm,		\
-	.mv_flush_tlb_current =		ev4_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev4_flush_tlb_current_page
-
 #define DO_EV5_MMU							\
-	.max_asn =			EV5_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV5_MAX_ASN			\
 
 #define DO_EV6_MMU							\
-	.max_asn =			EV6_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV6_MAX_ASN			\
 
 #define DO_EV7_MMU							\
-	.max_asn =			EV6_MAX_ASN,			\
-	.mv_switch_mm =			ev5_switch_mm,			\
-	.mv_activate_mm =		ev5_activate_mm,		\
-	.mv_flush_tlb_current =		ev5_flush_tlb_current,		\
-	.mv_flush_tlb_current_page =	ev5_flush_tlb_current_page
+	.max_asn =			EV6_MAX_ASN			\
 
 #define IO_LITE(UP,low)							\
 	.hae_register =		(unsigned long *) CAT(UP,_HAE_ADDRESS),	\
@@ -80,9 +59,11 @@
 	.mv_ioread8 =		CAT(low,_ioread8),			\
 	.mv_ioread16 =		CAT(low,_ioread16),			\
 	.mv_ioread32 =		CAT(low,_ioread32),			\
+	.mv_ioread64 =		CAT(low,_ioread64),			\
 	.mv_iowrite8 =		CAT(low,_iowrite8),			\
 	.mv_iowrite16 =		CAT(low,_iowrite16),			\
 	.mv_iowrite32 =		CAT(low,_iowrite32),			\
+	.mv_iowrite64 =		CAT(low,_iowrite64),			\
 	.mv_readb =		CAT(low,_readb),			\
 	.mv_readw =		CAT(low,_readw),			\
 	.mv_readl =		CAT(low,_readl),			\
diff --git a/arch/alpha/kernel/module.c b/arch/alpha/kernel/module.c
index ac110ae8f978..cbefa5a77384 100644
--- a/arch/alpha/kernel/module.c
+++ b/arch/alpha/kernel/module.c
@@ -146,10 +146,8 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 	base = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr;
 	symtab = (Elf64_Sym *)sechdrs[symindex].sh_addr;
 
-	/* The small sections were sorted to the end of the segment.
-	   The following should definitely cover them.  */
-	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
+	gp = got + 0x8000;
 
 	for (i = 0; i < n; i++) {
 		unsigned long r_sym = ELF64_R_SYM (rela[i].r_info);
@@ -212,7 +210,7 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 			    STO_ALPHA_STD_GPLOAD)
 				/* Omit the prologue. */
 				value += 8;
-			/* FALLTHRU */
+			fallthrough;
 		case R_ALPHA_BRADDR:
 			value -= (u64)location + 4;
 			if (value & 3)
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index bf497b8b0ec6..a08e8edef1a4 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -36,6 +36,7 @@
 #include <linux/types.h>
 #include <linux/ipc.h>
 #include <linux/namei.h>
+#include <linux/mount.h>
 #include <linux/uio.h>
 #include <linux/vfs.h>
 #include <linux/rcupdate.h>
@@ -96,7 +97,7 @@ struct osf_dirent {
 	unsigned int d_ino;
 	unsigned short d_reclen;
 	unsigned short d_namlen;
-	char d_name[1];
+	char d_name[];
 };
 
 struct osf_dirent_callback {
@@ -107,7 +108,7 @@ struct osf_dirent_callback {
 	int error;
 };
 
-static int
+static bool
 osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 	    loff_t offset, u64 ino, unsigned int d_type)
 {
@@ -119,11 +120,11 @@ osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 
 	buf->error = -EINVAL;	/* only used if we fail */
 	if (reclen > buf->count)
-		return -EINVAL;
+		return false;
 	d_ino = ino;
 	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
 		buf->error = -EOVERFLOW;
-		return -EOVERFLOW;
+		return false;
 	}
 	if (buf->basep) {
 		if (put_user(offset, buf->basep))
@@ -140,10 +141,10 @@ osf_filldir(struct dir_context *ctx, const char *name, int namlen,
 	dirent = (void __user *)dirent + reclen;
 	buf->dirent = dirent;
 	buf->count -= reclen;
-	return 0;
+	return true;
 Efault:
 	buf->error = -EFAULT;
-	return -EFAULT;
+	return false;
 }
 
 SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
@@ -151,7 +152,7 @@ SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
 		long __user *, basep)
 {
 	int error;
-	struct fd arg = fdget_pos(fd);
+	CLASS(fd_pos, arg)(fd);
 	struct osf_dirent_callback buf = {
 		.ctx.actor = osf_filldir,
 		.dirent = dirent,
@@ -159,16 +160,15 @@ SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd,
 		.count = count
 	};
 
-	if (!arg.file)
+	if (fd_empty(arg))
 		return -EBADF;
 
-	error = iterate_dir(arg.file, &buf.ctx);
+	error = iterate_dir(fd_file(arg), &buf.ctx);
 	if (error >= 0)
 		error = buf.error;
 	if (count != buf.count)
 		error = count - buf.count;
 
-	fdput_pos(arg);
 	return error;
 }
 
@@ -521,7 +521,7 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, const char __user *, path,
 		break;
 	default:
 		retval = -EINVAL;
-		printk("osf_mount(%ld, %x)\n", typenr, flag);
+		printk_ratelimited("osf_mount(%ld, %x)\n", typenr, flag);
 	}
 
 	return retval;
@@ -677,7 +677,7 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
 	default:
 		error = -EOPNOTSUPP;
 		break;
-	};
+	}
 	return error;
 }
 
@@ -834,7 +834,7 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
 			return -EFAULT;
 		state = &current_thread_info()->ieee_state;
 
-		/* Update softare trap enable bits.  */
+		/* Update software trap enable bits.  */
 		*state = (*state & ~IEEE_SW_MASK) | (swcr & IEEE_SW_MASK);
 
 		/* Update the real fpcr.  */
@@ -854,7 +854,7 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
 		state = &current_thread_info()->ieee_state;
 		exc &= IEEE_STATUS_MASK;
 
-		/* Update softare trap enable bits.  */
+		/* Update software trap enable bits.  */
  		swcr = (*state & IEEE_SW_MASK) | exc;
 		*state |= exc;
 
@@ -876,7 +876,7 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
 			if (fex & IEEE_TRAP_ENABLE_DZE) si_code = FPE_FLTDIV;
 			if (fex & IEEE_TRAP_ENABLE_INV) si_code = FPE_FLTINV;
 
-			send_sig_fault(SIGFPE, si_code,
+			send_sig_fault_trapno(SIGFPE, si_code,
 				       (void __user *)NULL,  /* FIXME */
 				       0, current);
  		}
@@ -963,7 +963,7 @@ put_tv32(struct timeval32 __user *o, struct timespec64 *i)
 }
 
 static inline long
-put_tv_to_tv32(struct timeval32 __user *o, struct timeval *i)
+put_tv_to_tv32(struct timeval32 __user *o, struct __kernel_old_timeval *i)
 {
 	return copy_to_user(o, &(struct timeval32){
 				.tv_sec = i->tv_sec,
@@ -971,30 +971,6 @@ put_tv_to_tv32(struct timeval32 __user *o, struct timeval *i)
 			    sizeof(struct timeval32));
 }
 
-static inline long
-get_it32(struct itimerval *o, struct itimerval32 __user *i)
-{
-	struct itimerval32 itv;
-	if (copy_from_user(&itv, i, sizeof(struct itimerval32)))
-		return -EFAULT;
-	o->it_interval.tv_sec = itv.it_interval.tv_sec;
-	o->it_interval.tv_usec = itv.it_interval.tv_usec;
-	o->it_value.tv_sec = itv.it_value.tv_sec;
-	o->it_value.tv_usec = itv.it_value.tv_usec;
-	return 0;
-}
-
-static inline long
-put_it32(struct itimerval32 __user *o, struct itimerval *i)
-{
-	return copy_to_user(o, &(struct itimerval32){
-				.it_interval.tv_sec = o->it_interval.tv_sec,
-				.it_interval.tv_usec = o->it_interval.tv_usec,
-				.it_value.tv_sec = o->it_value.tv_sec,
-				.it_value.tv_usec = o->it_value.tv_usec},
-			    sizeof(struct itimerval32));
-}
-
 static inline void
 jiffies_to_timeval32(unsigned long jiffies, struct timeval32 *value)
 {
@@ -1037,49 +1013,6 @@ SYSCALL_DEFINE2(osf_settimeofday, struct timeval32 __user *, tv,
 	return do_sys_settimeofday64(tv ? &kts : NULL, tz ? &ktz : NULL);
 }
 
-asmlinkage long sys_ni_posix_timers(void);
-
-SYSCALL_DEFINE2(osf_getitimer, int, which, struct itimerval32 __user *, it)
-{
-	struct itimerval kit;
-	int error;
-
-	if (!IS_ENABLED(CONFIG_POSIX_TIMERS))
-		return sys_ni_posix_timers();
-
-	error = do_getitimer(which, &kit);
-	if (!error && put_it32(it, &kit))
-		error = -EFAULT;
-
-	return error;
-}
-
-SYSCALL_DEFINE3(osf_setitimer, int, which, struct itimerval32 __user *, in,
-		struct itimerval32 __user *, out)
-{
-	struct itimerval kin, kout;
-	int error;
-
-	if (!IS_ENABLED(CONFIG_POSIX_TIMERS))
-		return sys_ni_posix_timers();
-
-	if (in) {
-		if (get_it32(&kin, in))
-			return -EFAULT;
-	} else
-		memset(&kin, 0, sizeof(kin));
-
-	error = do_setitimer(which, &kin, out ? &kout : NULL);
-	if (error || !out)
-		return error;
-
-	if (put_it32(out, &kout))
-		return -EFAULT;
-
-	return 0;
-
-}
-
 SYSCALL_DEFINE2(osf_utimes, const char __user *, filename,
 		struct timeval32 __user *, tvs)
 {
@@ -1277,36 +1210,26 @@ SYSCALL_DEFINE1(old_adjtimex, struct timex32 __user *, txc_p)
 	return ret;
 }
 
-/* Get an address range which is currently unmapped.  Similar to the
-   generic version except that we know how to honor ADDR_LIMIT_32BIT.  */
+/* Get an address range which is currently unmapped. */
 
 static unsigned long
 arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
 		         unsigned long limit)
 {
-	struct vm_unmapped_area_info info;
+	struct vm_unmapped_area_info info = {};
 
-	info.flags = 0;
 	info.length = len;
 	info.low_limit = addr;
 	info.high_limit = limit;
-	info.align_mask = 0;
-	info.align_offset = 0;
 	return vm_unmapped_area(&info);
 }
 
 unsigned long
 arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		       unsigned long len, unsigned long pgoff,
-		       unsigned long flags)
+		       unsigned long flags, vm_flags_t vm_flags)
 {
-	unsigned long limit;
-
-	/* "32 bit" actually means 31 bit, since pointers sign extend.  */
-	if (current->personality & ADDR_LIMIT_32BIT)
-		limit = 0x80000000;
-	else
-		limit = TASK_SIZE;
+	unsigned long limit = TASK_SIZE;
 
 	if (len > limit)
 		return -ENOMEM;
@@ -1342,48 +1265,6 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	return addr;
 }
 
-#ifdef CONFIG_OSF4_COMPAT
-/* Clear top 32 bits of iov_len in the user's buffer for
-   compatibility with old versions of OSF/1 where iov_len
-   was defined as int. */
-static int
-osf_fix_iov_len(const struct iovec __user *iov, unsigned long count)
-{
-	unsigned long i;
-
-	for (i = 0 ; i < count ; i++) {
-		int __user *iov_len_high = (int __user *)&iov[i].iov_len + 1;
-
-		if (put_user(0, iov_len_high))
-			return -EFAULT;
-	}
-	return 0;
-}
-#endif
-
-SYSCALL_DEFINE3(osf_readv, unsigned long, fd,
-		const struct iovec __user *, vector, unsigned long, count)
-{
-#ifdef CONFIG_OSF4_COMPAT
-	if (unlikely(personality(current->personality) == PER_OSF4))
-		if (osf_fix_iov_len(vector, count))
-			return -EFAULT;
-#endif
-
-	return sys_readv(fd, vector, count);
-}
-
-SYSCALL_DEFINE3(osf_writev, unsigned long, fd,
-		const struct iovec __user *, vector, unsigned long, count)
-{
-#ifdef CONFIG_OSF4_COMPAT
-	if (unlikely(personality(current->personality) == PER_OSF4))
-		if (osf_fix_iov_len(vector, count))
-			return -EFAULT;
-#endif
-	return sys_writev(fd, vector, count);
-}
-
 SYSCALL_DEFINE2(osf_getpriority, int, which, int, who)
 {
 	int prio = sys_getpriority(which, who);
diff --git a/arch/alpha/kernel/pc873xx.c b/arch/alpha/kernel/pc873xx.c
index 63aee5d86e02..82b19c9e59d6 100644
--- a/arch/alpha/kernel/pc873xx.c
+++ b/arch/alpha/kernel/pc873xx.c
@@ -13,12 +13,12 @@ static char *pc873xx_names[] = {
 static unsigned int base, model;
 
 
-unsigned int __init pc873xx_get_base()
+unsigned int __init pc873xx_get_base(void)
 {
 	return base;
 }
 
-char *__init pc873xx_get_model()
+char *__init pc873xx_get_model(void)
 {
 	return pc873xx_names[model];
 }
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
deleted file mode 100644
index ae82061edae9..000000000000
--- a/arch/alpha/kernel/pci-noop.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/pci-noop.c
- *
- * Stub PCI interfaces for Jensen-specific kernels.
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/gfp.h>
-#include <linux/capability.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/syscalls.h>
-
-#include "proto.h"
-
-
-/*
- * The PCI controller list.
- */
-
-struct pci_controller *hose_head, **hose_tail = &hose_head;
-struct pci_controller *pci_isa_hose;
-
-
-struct pci_controller * __init
-alloc_pci_controller(void)
-{
-	struct pci_controller *hose;
-
-	hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
-	if (!hose)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*hose));
-
-	*hose_tail = hose;
-	hose_tail = &hose->next;
-
-	return hose;
-}
-
-struct resource * __init
-alloc_resource(void)
-{
-	void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-
-	if (!ptr)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(struct resource));
-
-	return ptr;
-}
-
-SYSCALL_DEFINE3(pciconfig_iobase, long, which, unsigned long, bus,
-		unsigned long, dfn)
-{
-	struct pci_controller *hose;
-
-	/* from hose or from bus.devfn */
-	if (which & IOBASE_FROM_HOSE) {
-		for (hose = hose_head; hose; hose = hose->next)
-			if (hose->index == bus)
-				break;
-		if (!hose)
-			return -ENODEV;
-	} else {
-		/* Special hook for ISA access.  */
-		if (bus == 0 && dfn == 0)
-			hose = pci_isa_hose;
-		else
-			return -ENODEV;
-	}
-
-	switch (which & ~IOBASE_FROM_HOSE) {
-	case IOBASE_HOSE:
-		return hose->index;
-	case IOBASE_SPARSE_MEM:
-		return hose->sparse_mem_base;
-	case IOBASE_DENSE_MEM:
-		return hose->dense_mem_base;
-	case IOBASE_SPARSE_IO:
-		return hose->sparse_io_base;
-	case IOBASE_DENSE_IO:
-		return hose->dense_io_base;
-	case IOBASE_ROOT_BUS:
-		return hose->bus->number;
-	}
-
-	return -EOPNOTSUPP;
-}
-
-SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
-		unsigned long, off, unsigned long, len, void __user *, buf)
-{
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	else
-		return -ENODEV;
-}
-
-SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
-		unsigned long, off, unsigned long, len, void __user *, buf)
-{
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	else
-		return -ENODEV;
-}
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index f94c732fedeb..3048758304b5 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -60,9 +60,11 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
  * @sparse: address space type
  *
  * Use the bus mapping routines to map a PCI resource into userspace.
+ *
+ * Return: %0 on success, negative error code otherwise
  */
 static int pci_mmap_resource(struct kobject *kobj,
-			     struct bin_attribute *attr,
+			     const struct bin_attribute *attr,
 			     struct vm_area_struct *vma, int sparse)
 {
 	struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
@@ -71,10 +73,10 @@ static int pci_mmap_resource(struct kobject *kobj,
 	struct pci_bus_region bar;
 	int i;
 
-	for (i = 0; i < PCI_ROM_RESOURCE; i++)
+	for (i = 0; i < PCI_STD_NUM_BARS; i++)
 		if (res == &pdev->resource[i])
 			break;
-	if (i >= PCI_ROM_RESOURCE)
+	if (i >= PCI_STD_NUM_BARS)
 		return -ENODEV;
 
 	if (res->flags & IORESOURCE_MEM && iomem_is_exclusive(res->start))
@@ -91,14 +93,14 @@ static int pci_mmap_resource(struct kobject *kobj,
 }
 
 static int pci_mmap_resource_sparse(struct file *filp, struct kobject *kobj,
-				    struct bin_attribute *attr,
+				    const struct bin_attribute *attr,
 				    struct vm_area_struct *vma)
 {
 	return pci_mmap_resource(kobj, attr, vma, 1);
 }
 
 static int pci_mmap_resource_dense(struct file *filp, struct kobject *kobj,
-				   struct bin_attribute *attr,
+				   const struct bin_attribute *attr,
 				   struct vm_area_struct *vma)
 {
 	return pci_mmap_resource(kobj, attr, vma, 0);
@@ -106,7 +108,7 @@ static int pci_mmap_resource_dense(struct file *filp, struct kobject *kobj,
 
 /**
  * pci_remove_resource_files - cleanup resource files
- * @dev: dev to cleanup
+ * @pdev: pci_dev to cleanup
  *
  * If we created resource files for @dev, remove them from sysfs and
  * free their resources.
@@ -115,7 +117,7 @@ void pci_remove_resource_files(struct pci_dev *pdev)
 {
 	int i;
 
-	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 		struct bin_attribute *res_attr;
 
 		res_attr = pdev->res_attr[i];
@@ -221,10 +223,12 @@ static int pci_create_attr(struct pci_dev *pdev, int num)
 }
 
 /**
- * pci_create_resource_files - create resource files in sysfs for @dev
- * @dev: dev in question
+ * pci_create_resource_files - create resource files in sysfs for @pdev
+ * @pdev: pci_dev in question
  *
  * Walk the resources in @dev creating files for each resource available.
+ *
+ * Return: %0 on success, or negative error code
  */
 int pci_create_resource_files(struct pci_dev *pdev)
 {
@@ -232,7 +236,7 @@ int pci_create_resource_files(struct pci_dev *pdev)
 	int retval;
 
 	/* Expose the PCI resources from this device as files */
-	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
+	for (i = 0; i < PCI_STD_NUM_BARS; i++) {
 
 		/* skip empty resources */
 		if (!pci_resource_len(pdev, i))
@@ -296,7 +300,7 @@ int pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
 
 /**
  * pci_adjust_legacy_attr - adjustment of legacy file attributes
- * @b: bus to create files under
+ * @bus: bus to create files under
  * @mmap_type: I/O port or memory
  *
  * Adjust file name and size for sparse mappings.
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 64fbfb0763b2..8e9b4ac86b7e 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -288,11 +288,10 @@ pcibios_claim_one_bus(struct pci_bus *b)
 	struct pci_bus *child_bus;
 
 	list_for_each_entry(dev, &b->devices, bus_list) {
+		struct resource *r;
 		int i;
 
-		for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-			struct resource *r = &dev->resource[i];
-
+		pci_dev_for_each_resource(dev, r, i) {
 			if (r->parent || !r->start || !r->flags)
 				continue;
 			if (pci_has_flag(PCI_PROBE_ONLY) ||
@@ -392,10 +391,7 @@ alloc_pci_controller(void)
 {
 	struct pci_controller *hose;
 
-	hose = memblock_alloc(sizeof(*hose), SMP_CACHE_BYTES);
-	if (!hose)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*hose));
+	hose = memblock_alloc_or_panic(sizeof(*hose), SMP_CACHE_BYTES);
 
 	*hose_tail = hose;
 	hose_tail = &hose->next;
@@ -406,13 +402,7 @@ alloc_pci_controller(void)
 struct resource * __init
 alloc_resource(void)
 {
-	void *ptr = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES);
-
-	if (!ptr)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(struct resource));
-
-	return ptr;
+	return memblock_alloc_or_panic(sizeof(struct resource), SMP_CACHE_BYTES);
 }
 
 
diff --git a/arch/alpha/kernel/pci_impl.h b/arch/alpha/kernel/pci_impl.h
index 18043af45e2b..a16325ce21c4 100644
--- a/arch/alpha/kernel/pci_impl.h
+++ b/arch/alpha/kernel/pci_impl.h
@@ -143,9 +143,7 @@ struct pci_iommu_arena
 	unsigned int align_entry;
 };
 
-#if defined(CONFIG_ALPHA_SRM) && \
-    (defined(CONFIG_ALPHA_CIA) || defined(CONFIG_ALPHA_LCA) || \
-     defined(CONFIG_ALPHA_AVANTI))
+#if defined(CONFIG_ALPHA_SRM) && defined(CONFIG_ALPHA_CIA)
 # define NEED_SRM_SAVE_RESTORE
 #else
 # undef NEED_SRM_SAVE_RESTORE
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 7f1925a32c99..dc91de50f906 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -11,8 +11,9 @@
 #include <linux/export.h>
 #include <linux/scatterlist.h>
 #include <linux/log2.h>
-#include <linux/dma-mapping.h>
+#include <linux/dma-map-ops.h>
 #include <linux/iommu-helper.h>
+#include <linux/string_choices.h>
 
 #include <asm/io.h>
 #include <asm/hwrpb.h>
@@ -71,43 +72,8 @@ iommu_arena_new_node(int nid, struct pci_controller *hose, dma_addr_t base,
 	if (align < mem_size)
 		align = mem_size;
 
-
-#ifdef CONFIG_DISCONTIGMEM
-
-	arena = memblock_alloc_node(sizeof(*arena), align, nid);
-	if (!NODE_DATA(nid) || !arena) {
-		printk("%s: couldn't allocate arena from node %d\n"
-		       "    falling back to system-wide allocation\n",
-		       __func__, nid);
-		arena = memblock_alloc(sizeof(*arena), SMP_CACHE_BYTES);
-		if (!arena)
-			panic("%s: Failed to allocate %zu bytes\n", __func__,
-			      sizeof(*arena));
-	}
-
-	arena->ptes = memblock_alloc_node(sizeof(*arena), align, nid);
-	if (!NODE_DATA(nid) || !arena->ptes) {
-		printk("%s: couldn't allocate arena ptes from node %d\n"
-		       "    falling back to system-wide allocation\n",
-		       __func__, nid);
-		arena->ptes = memblock_alloc(mem_size, align);
-		if (!arena->ptes)
-			panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-			      __func__, mem_size, align);
-	}
-
-#else /* CONFIG_DISCONTIGMEM */
-
-	arena = memblock_alloc(sizeof(*arena), SMP_CACHE_BYTES);
-	if (!arena)
-		panic("%s: Failed to allocate %zu bytes\n", __func__,
-		      sizeof(*arena));
-	arena->ptes = memblock_alloc(mem_size, align);
-	if (!arena->ptes)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, mem_size, align);
-
-#endif /* CONFIG_DISCONTIGMEM */
+	arena = memblock_alloc_or_panic(sizeof(*arena), SMP_CACHE_BYTES);
+	arena->ptes = memblock_alloc_or_panic(mem_size, align);
 
 	spin_lock_init(&arena->lock);
 	arena->hose = hose;
@@ -141,12 +107,7 @@ iommu_arena_find_pages(struct device *dev, struct pci_iommu_arena *arena,
 	unsigned long boundary_size;
 
 	base = arena->dma_base >> PAGE_SHIFT;
-	if (dev) {
-		boundary_size = dma_get_seg_boundary(dev) + 1;
-		boundary_size >>= PAGE_SHIFT;
-	} else {
-		boundary_size = 1UL << (32 - PAGE_SHIFT);
-	}
+	boundary_size = dma_get_seg_boundary_nr_pages(dev, PAGE_SHIFT);
 
 	/* Search forward for the first mask-aligned sequence of N free ptes */
 	ptes = arena->ptes;
@@ -161,10 +122,12 @@ again:
 			goto again;
 		}
 
-		if (ptes[p+i])
-			p = ALIGN(p + i + 1, mask + 1), i = 0;
-		else
+		if (ptes[p+i]) {
+			p = ALIGN(p + i + 1, mask + 1);
+			i = 0;
+		} else {
 			i = i + 1;
+		}
 	}
 
 	if (i < n) {
@@ -250,7 +213,7 @@ static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
 
 	/* If both conditions above are met, we are fine. */
 	DBGA("pci_dac_dma_supported %s from %ps\n",
-	     ok ? "yes" : "no", __builtin_return_address(0));
+	     str_yes_no(ok), __builtin_return_address(0));
 
 	return ok;
 }
@@ -367,7 +330,7 @@ static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page,
 	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
 	int dac_allowed;
 
-	BUG_ON(dir == PCI_DMA_NONE);
+	BUG_ON(dir == DMA_NONE);
 
 	dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; 
 	return pci_map_single_1(pdev, (char *)page_address(page) + offset, 
@@ -390,7 +353,7 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr,
 	struct pci_iommu_arena *arena;
 	long dma_ofs, npages;
 
-	BUG_ON(dir == PCI_DMA_NONE);
+	BUG_ON(dir == DMA_NONE);
 
 	if (dma_addr >= __direct_map_base
 	    && dma_addr < __direct_map_base + __direct_map_size) {
@@ -494,7 +457,7 @@ static void alpha_pci_free_coherent(struct device *dev, size_t size,
 				    unsigned long attrs)
 {
 	struct pci_dev *pdev = alpha_gendev_to_pci(dev);
-	pci_unmap_single(pdev, dma_addr, size, PCI_DMA_BIDIRECTIONAL);
+	dma_unmap_single(&pdev->dev, dma_addr, size, DMA_BIDIRECTIONAL);
 	free_pages((unsigned long)cpu_addr, get_order(size));
 
 	DBGA2("pci_free_consistent: [%llx,%zx] from %ps\n",
@@ -638,7 +601,7 @@ sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
 
 		while (sg+1 < end && (int) sg[1].dma_address == -1) {
 			size += sg[1].length;
-			sg++;
+			sg = sg_next(sg);
 		}
 
 		npages = iommu_num_pages(paddr, size, PAGE_SIZE);
@@ -673,7 +636,7 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
 	dma_addr_t max_dma;
 	int dac_allowed;
 
-	BUG_ON(dir == PCI_DMA_NONE);
+	BUG_ON(dir == DMA_NONE);
 
 	dac_allowed = dev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0;
 
@@ -683,7 +646,9 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
 		sg->dma_address
 		  = pci_map_single_1(pdev, SG_ENT_VIRT_ADDRESS(sg),
 				     sg->length, dac_allowed);
-		return sg->dma_address != DMA_MAPPING_ERROR;
+		if (sg->dma_address == DMA_MAPPING_ERROR)
+			return -EIO;
+		return 1;
 	}
 
 	start = sg;
@@ -719,8 +684,10 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
 	if (out < end)
 		out->dma_length = 0;
 
-	if (out - start == 0)
+	if (out - start == 0) {
 		printk(KERN_WARNING "pci_map_sg failed: no entries?\n");
+		return -ENOMEM;
+	}
 	DBGA("pci_map_sg: %ld entries\n", out - start);
 
 	return out - start;
@@ -732,8 +699,8 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg,
 	/* Some allocation failed while mapping the scatterlist
 	   entries.  Unmap them now.  */
 	if (out > start)
-		pci_unmap_sg(pdev, start, out - start, dir);
-	return 0;
+		dma_unmap_sg(&pdev->dev, start, out - start, dir);
+	return -ENOMEM;
 }
 
 /* Unmap a set of streaming mode DMA translations.  Again, cpu read
@@ -752,7 +719,7 @@ static void alpha_pci_unmap_sg(struct device *dev, struct scatterlist *sg,
 	dma_addr_t max_dma;
 	dma_addr_t fbeg, fend;
 
-	BUG_ON(dir == PCI_DMA_NONE);
+	BUG_ON(dir == DMA_NONE);
 
 	if (! alpha_mv.mv_pci_tbi)
 		return;
@@ -957,5 +924,7 @@ const struct dma_map_ops alpha_pci_ops = {
 	.dma_supported		= alpha_pci_supported,
 	.mmap			= dma_common_mmap,
 	.get_sgtable		= dma_common_get_sgtable,
+	.alloc_pages_op		= dma_common_alloc_pages,
+	.free_pages		= dma_common_free_pages,
 };
 EXPORT_SYMBOL(alpha_pci_ops);
diff --git a/arch/alpha/kernel/perf_event.c b/arch/alpha/kernel/perf_event.c
index 4341ccf5c0c4..a3eaab094ece 100644
--- a/arch/alpha/kernel/perf_event.c
+++ b/arch/alpha/kernel/perf_event.c
@@ -574,7 +574,7 @@ static void alpha_pmu_start(struct perf_event *event, int flags)
  * Check that CPU performance counters are supported.
  * - currently support EV67 and later CPUs.
  * - actually some later revisions of the EV6 have the same PMC model as the
- *     EV67 but we don't do suffiently deep CPU detection to detect them.
+ *     EV67 but we don't do sufficiently deep CPU detection to detect them.
  *     Bad luck to the very few people who might have one, I guess.
  */
 static int supported_cpu(void)
@@ -689,8 +689,6 @@ static int __hw_perf_event_init(struct perf_event *event)
  */
 static int alpha_pmu_event_init(struct perf_event *event)
 {
-	int err;
-
 	/* does not support taken branch sampling */
 	if (has_branch_stack(event))
 		return -EOPNOTSUPP;
@@ -709,9 +707,7 @@ static int alpha_pmu_event_init(struct perf_event *event)
 		return -ENODEV;
 
 	/* Do the real initialisation work. */
-	err = __hw_perf_event_init(event);
-
-	return err;
+	return __hw_perf_event_init(event);
 }
 
 /*
@@ -824,7 +820,7 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 	if (unlikely(la_ptr >= alpha_pmu->num_pmcs)) {
 		/* This should never occur! */
 		irq_err_count++;
-		pr_warning("PMI: silly index %ld\n", la_ptr);
+		pr_warn("PMI: silly index %ld\n", la_ptr);
 		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
 		return;
 	}
@@ -847,7 +843,7 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 	if (unlikely(!event)) {
 		/* This should never occur! */
 		irq_err_count++;
-		pr_warning("PMI: No event at index %d!\n", idx);
+		pr_warn("PMI: No event at index %d!\n", idx);
 		wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
 		return;
 	}
@@ -856,14 +852,9 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 	alpha_perf_event_update(event, hwc, idx, alpha_pmu->pmc_max_period[idx]+1);
 	perf_sample_data_init(&data, 0, hwc->last_period);
 
-	if (alpha_perf_event_set_period(event, hwc, idx)) {
-		if (perf_event_overflow(event, &data, regs)) {
-			/* Interrupts coming too quickly; "throttle" the
-			 * counter, i.e., disable it for a little while.
-			 */
-			alpha_pmu_stop(event, 0);
-		}
-	}
+	if (alpha_perf_event_set_period(event, hwc, idx))
+		perf_event_overflow(event, &data, regs);
+
 	wrperfmon(PERFMON_CMD_ENABLE, cpuc->idx_mask);
 
 	return;
@@ -874,7 +865,7 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 /*
  * Init call to initialise performance events at kernel startup.
  */
-int __init init_hw_perf_events(void)
+static int __init init_hw_perf_events(void)
 {
 	pr_info("Performance events: ");
 
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 48b81d015d8a..06522451f018 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -9,6 +9,7 @@
  * This file handles the architecture-dependent parts of process handling.
  */
 
+#include <linux/cpu.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -37,7 +38,6 @@
 #include <asm/reg.h>
 #include <linux/uaccess.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/hwrpb.h>
 #include <asm/fpu.h>
 
@@ -58,12 +58,12 @@ EXPORT_SYMBOL(pm_power_off);
 void arch_cpu_idle(void)
 {
 	wtint(0);
-	local_irq_enable();
 }
 
-void arch_cpu_idle_dead(void)
+void __noreturn arch_cpu_idle_dead(void)
 {
 	wtint(INT_MAX);
+	BUG();
 }
 #endif /* ALPHA_WTINT */
 
@@ -75,7 +75,7 @@ struct halt_info {
 static void
 common_shutdown_1(void *generic_ptr)
 {
-	struct halt_info *how = (struct halt_info *)generic_ptr;
+	struct halt_info *how = generic_ptr;
 	struct percpu_struct *cpup;
 	unsigned long *pflags, flags;
 	int cpuid = smp_processor_id();
@@ -126,7 +126,7 @@ common_shutdown_1(void *generic_ptr)
 	/* Wait for the secondaries to halt. */
 	set_cpu_present(boot_cpuid, false);
 	set_cpu_possible(boot_cpuid, false);
-	while (cpumask_weight(cpu_present_mask))
+	while (!cpumask_empty(cpu_present_mask))
 		barrier();
 #endif
 
@@ -135,7 +135,7 @@ common_shutdown_1(void *generic_ptr)
 #ifdef CONFIG_DUMMY_CONSOLE
 		/* If we've gotten here after SysRq-b, leave interrupt
 		   context before taking over the console. */
-		if (in_interrupt())
+		if (in_hardirq())
 			irq_exit();
 		/* This has the effect of resetting the VGA video origin.  */
 		console_lock();
@@ -226,19 +226,14 @@ flush_thread(void)
 	current_thread_info()->pcb.unique = 0;
 }
 
-void
-release_thread(struct task_struct *dead_task)
-{
-}
-
 /*
  * Copy architecture-specific thread state
  */
-int
-copy_thread(unsigned long clone_flags, unsigned long usp,
-	    unsigned long kthread_arg,
-	    struct task_struct *p)
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
+	u64 clone_flags = args->flags;
+	unsigned long usp = args->stack;
+	unsigned long tls = args->tls;
 	extern void ret_from_fork(void);
 	extern void ret_from_kernel_thread(void);
 
@@ -250,15 +245,17 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
 	childstack = ((struct switch_stack *) childregs) - 1;
 	childti->pcb.ksp = (unsigned long) childstack;
 	childti->pcb.flags = 1;	/* set FEN, clear everything else */
+	childti->status |= TS_SAVED_FP | TS_RESTORE_FP;
 
-	if (unlikely(p->flags & PF_KTHREAD)) {
+	if (unlikely(args->fn)) {
 		/* kernel thread */
 		memset(childstack, 0,
 			sizeof(struct switch_stack) + sizeof(struct pt_regs));
 		childstack->r26 = (unsigned long) ret_from_kernel_thread;
-		childstack->r9 = usp;	/* function */
-		childstack->r10 = kthread_arg;
-		childregs->hae = alpha_mv.hae_cache,
+		childstack->r9 = (unsigned long) args->fn;
+		childstack->r10 = (unsigned long) args->fn_arg;
+		childregs->hae = alpha_mv.hae_cache;
+		memset(childti->fp, '\0', sizeof(childti->fp));
 		childti->pcb.usp = 0;
 		return 0;
 	}
@@ -268,7 +265,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
 	   required for proper operation in the case of a threaded
 	   application calling fork.  */
 	if (clone_flags & CLONE_SETTLS)
-		childti->pcb.unique = regs->r20;
+		childti->pcb.unique = tls;
 	else
 		regs->r20 = 0;	/* OSF/1 has some strange fork() semantics.  */
 	childti->pcb.usp = usp ?: rdusp();
@@ -339,14 +336,11 @@ dump_elf_task(elf_greg_t *dest, struct task_struct *task)
 }
 EXPORT_SYMBOL(dump_elf_task);
 
-int
-dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task)
+int elf_core_copy_task_fpregs(struct task_struct *t, elf_fpregset_t *fpu)
 {
-	struct switch_stack *sw = (struct switch_stack *)task_pt_regs(task) - 1;
-	memcpy(dest, sw->fp, 32 * 8);
+	memcpy(fpu, task_thread_info(t)->fp, 32 * 8);
 	return 1;
 }
-EXPORT_SYMBOL(dump_elf_task_fp);
 
 /*
  * Return saved PC of a blocked thread.  This assumes the frame
@@ -378,12 +372,11 @@ thread_saved_pc(struct task_struct *t)
 }
 
 unsigned long
-get_wchan(struct task_struct *p)
+__get_wchan(struct task_struct *p)
 {
 	unsigned long schedule_frame;
 	unsigned long pc;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
+
 	/*
 	 * This one depends on the frame size of schedule().  Do a
 	 * "disass schedule" in gdb to find the frame size.  Also, the
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index f1fce942fddc..a8bc3ead776b 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -1,9 +1,8 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/interrupt.h>
+#include <linux/screen_info.h>
 #include <linux/io.h>
 
-#include <asm/pgtable.h>
-
 /* Prototypes of functions used across modules here in this directory.  */
 
 #define vucp	volatile unsigned char  *
@@ -16,13 +15,7 @@ struct pt_regs;
 struct task_struct;
 struct pci_dev;
 struct pci_controller;
-
-/* core_apecs.c */
-extern struct pci_ops apecs_pci_ops;
-extern void apecs_init_arch(void);
-extern void apecs_pci_clr_err(void);
-extern void apecs_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void apecs_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
+struct pci_bus;
 
 /* core_cia.c */
 extern struct pci_ops cia_pci_ops;
@@ -39,22 +32,12 @@ extern int irongate_pci_clr_err(void);
 extern void irongate_init_arch(void);
 #define irongate_pci_tbi ((void *)0)
 
-/* core_lca.c */
-extern struct pci_ops lca_pci_ops;
-extern void lca_init_arch(void);
-extern void lca_machine_check(unsigned long vector, unsigned long la_ptr);
-extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-
 /* core_marvel.c */
 extern struct pci_ops marvel_pci_ops;
 extern void marvel_init_arch(void);
 extern void marvel_kill_arch(int);
 extern void marvel_machine_check(unsigned long, unsigned long);
 extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-extern int marvel_pa_to_nid(unsigned long);
-extern int marvel_cpuid_to_nid(int);
-extern unsigned long marvel_node_mem_start(int);
-extern unsigned long marvel_node_mem_size(int);
 extern struct _alpha_agp_info *marvel_agp_info(void);
 struct io7 *marvel_find_io7(int pe);
 struct io7 *marvel_next_io7(struct io7 *prev);
@@ -103,10 +86,6 @@ extern void wildfire_init_arch(void);
 extern void wildfire_kill_arch(int);
 extern void wildfire_machine_check(unsigned long vector, unsigned long la_ptr);
 extern void wildfire_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
-extern int wildfire_pa_to_nid(unsigned long);
-extern int wildfire_cpuid_to_nid(int);
-extern unsigned long wildfire_node_mem_start(int);
-extern unsigned long wildfire_node_mem_size(int);
 
 /* console.c */
 #ifdef CONFIG_VGA_HOSE
@@ -123,6 +102,10 @@ extern int boot_cpuid;
 #ifdef CONFIG_VERBOSE_MCHECK
 extern unsigned long alpha_verbose_mcheck;
 #endif
+#ifdef CONFIG_BLK_DEV_INITRD
+extern void * __init move_initrd(unsigned long);
+#endif
+extern struct screen_info vgacon_screen_info;
 
 /* srmcons.c */
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
@@ -136,6 +119,7 @@ extern void unregister_srm_console(void);
 /* smp.c */
 extern void setup_smp(void);
 extern void handle_ipi(struct pt_regs *);
+extern void __init smp_callin(void);
 
 /* bios32.c */
 /* extern void reset_for_srm(void); */
@@ -147,13 +131,13 @@ extern void common_init_rtc(void);
 extern unsigned long est_cycle_freq;
 
 /* smc37c93x.c */
-extern void SMC93x_Init(void);
+extern int __init SMC93x_Init(void);
 
 /* smc37c669.c */
-extern void SMC669_Init(int);
+extern void __init SMC669_Init(int);
 
 /* es1888.c */
-extern void es1888_init(void);
+extern void __init es1888_init(void);
 
 /* ../lib/fpreg.c */
 extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
@@ -174,19 +158,37 @@ extern void entSys(void);
 extern void entUna(void);
 extern void entDbg(void);
 
+/* pci.c */
+extern void pcibios_claim_one_bus(struct pci_bus *);
+
 /* ptrace.c */
 extern int ptrace_set_bpt (struct task_struct *child);
 extern int ptrace_cancel_bpt (struct task_struct *child);
+extern void syscall_trace_leave(void);
+extern unsigned long syscall_trace_enter(void);
+
+/* signal.c */
+struct sigcontext;
+extern void do_sigreturn(struct sigcontext __user *);
+struct rt_sigframe;
+extern void do_rt_sigreturn(struct rt_sigframe __user *);
+extern void do_work_pending(struct pt_regs *, unsigned long, unsigned long, unsigned long);
 
 /* traps.c */
 extern void dik_show_regs(struct pt_regs *regs, unsigned long *r9_15);
 extern void die_if_kernel(char *, struct pt_regs *, long, unsigned long *);
+extern void do_entInt(unsigned long, unsigned long, unsigned long, struct pt_regs *);
+extern void do_entArith(unsigned long, unsigned long, struct pt_regs *);
+extern void do_entIF(unsigned long, struct pt_regs *);
+extern void do_entDbg(struct pt_regs *);
+struct allregs;
+extern void do_entUna(void *, unsigned long, unsigned long, struct allregs *);
+extern void do_entUnaUser(void __user *, unsigned long, unsigned long, struct pt_regs *);
 
 /* sys_titan.c */
 extern void titan_dispatch_irqs(u64);
 
 /* ../mm/init.c */
-extern void switch_to_system_map(void);
 extern void srm_paging_stop(void);
 
 static inline int
diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c
index cb8d599e72d6..fde4c68e7a0b 100644
--- a/arch/alpha/kernel/ptrace.c
+++ b/arch/alpha/kernel/ptrace.c
@@ -15,11 +15,9 @@
 #include <linux/user.h>
 #include <linux/security.h>
 #include <linux/signal.h>
-#include <linux/tracehook.h>
 #include <linux/audit.h>
 
 #include <linux/uaccess.h>
-#include <asm/pgtable.h>
 #include <asm/fpu.h>
 
 #include "proto.h"
@@ -80,6 +78,8 @@ enum {
  (PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \
   + offsetof(struct switch_stack, reg))
 
+#define FP_REG(reg) (offsetof(struct thread_info, reg))
+
 static int regoff[] = {
 	PT_REG(	   r0), PT_REG(	   r1), PT_REG(	   r2), PT_REG(	  r3),
 	PT_REG(	   r4), PT_REG(	   r5), PT_REG(	   r6), PT_REG(	  r7),
@@ -89,14 +89,14 @@ static int regoff[] = {
 	PT_REG(	  r20), PT_REG(	  r21), PT_REG(	  r22), PT_REG(	 r23),
 	PT_REG(	  r24), PT_REG(	  r25), PT_REG(	  r26), PT_REG(	 r27),
 	PT_REG(	  r28), PT_REG(	   gp),		   -1,		   -1,
-	SW_REG(fp[ 0]), SW_REG(fp[ 1]), SW_REG(fp[ 2]), SW_REG(fp[ 3]),
-	SW_REG(fp[ 4]), SW_REG(fp[ 5]), SW_REG(fp[ 6]), SW_REG(fp[ 7]),
-	SW_REG(fp[ 8]), SW_REG(fp[ 9]), SW_REG(fp[10]), SW_REG(fp[11]),
-	SW_REG(fp[12]), SW_REG(fp[13]), SW_REG(fp[14]), SW_REG(fp[15]),
-	SW_REG(fp[16]), SW_REG(fp[17]), SW_REG(fp[18]), SW_REG(fp[19]),
-	SW_REG(fp[20]), SW_REG(fp[21]), SW_REG(fp[22]), SW_REG(fp[23]),
-	SW_REG(fp[24]), SW_REG(fp[25]), SW_REG(fp[26]), SW_REG(fp[27]),
-	SW_REG(fp[28]), SW_REG(fp[29]), SW_REG(fp[30]), SW_REG(fp[31]),
+	FP_REG(fp[ 0]), FP_REG(fp[ 1]), FP_REG(fp[ 2]), FP_REG(fp[ 3]),
+	FP_REG(fp[ 4]), FP_REG(fp[ 5]), FP_REG(fp[ 6]), FP_REG(fp[ 7]),
+	FP_REG(fp[ 8]), FP_REG(fp[ 9]), FP_REG(fp[10]), FP_REG(fp[11]),
+	FP_REG(fp[12]), FP_REG(fp[13]), FP_REG(fp[14]), FP_REG(fp[15]),
+	FP_REG(fp[16]), FP_REG(fp[17]), FP_REG(fp[18]), FP_REG(fp[19]),
+	FP_REG(fp[20]), FP_REG(fp[21]), FP_REG(fp[22]), FP_REG(fp[23]),
+	FP_REG(fp[24]), FP_REG(fp[25]), FP_REG(fp[26]), FP_REG(fp[27]),
+	FP_REG(fp[28]), FP_REG(fp[29]), FP_REG(fp[30]), FP_REG(fp[31]),
 	PT_REG(	   pc)
 };
 
@@ -324,7 +324,7 @@ asmlinkage unsigned long syscall_trace_enter(void)
 	unsigned long ret = 0;
 	struct pt_regs *regs = current_pt_regs();
 	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    tracehook_report_syscall_entry(current_pt_regs()))
+	    ptrace_report_syscall_entry(current_pt_regs()))
 		ret = -1UL;
 	audit_syscall_entry(regs->r0, regs->r16, regs->r17, regs->r18, regs->r19);
 	return ret ?: current_pt_regs()->r0;
@@ -335,5 +335,5 @@ syscall_trace_leave(void)
 {
 	audit_syscall_exit(current_pt_regs());
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(current_pt_regs(), 0);
+		ptrace_report_syscall_exit(current_pt_regs(), 0);
 }
diff --git a/arch/alpha/kernel/rtc.c b/arch/alpha/kernel/rtc.c
index 1b1d5963ac55..cfdf90bc8b3f 100644
--- a/arch/alpha/kernel/rtc.c
+++ b/arch/alpha/kernel/rtc.c
@@ -80,7 +80,12 @@ init_rtc_epoch(void)
 static int
 alpha_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	mc146818_get_time(tm);
+	int ret = mc146818_get_time(tm, 10);
+
+	if (ret < 0) {
+		dev_err_ratelimited(dev, "unable to read current time\n");
+		return ret;
+	}
 
 	/* Adjust for non-default epochs.  It's easier to depend on the
 	   generic __get_rtc_time and adjust the epoch here than create
@@ -216,6 +221,6 @@ alpha_rtc_init(void)
 		rtc->ops = &remote_rtc_ops;
 #endif
 
-	return rtc_register_device(rtc);
+	return devm_rtc_register_device(rtc);
 }
 device_initcall(alpha_rtc_init);
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 5d4c76a77a9f..bebdffafaee8 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
+#include <linux/panic_notifier.h>
 #include <linux/platform_device.h>
 #include <linux/memblock.h>
 #include <linux/pci.h>
@@ -46,7 +47,6 @@
 #include <linux/log2.h>
 #include <linux/export.h>
 
-extern struct atomic_notifier_head panic_notifier_list;
 static int alpha_panic_event(struct notifier_block *, unsigned long, void *);
 static struct notifier_block alpha_panic_block = {
 	alpha_panic_event,
@@ -55,7 +55,6 @@ static struct notifier_block alpha_panic_block = {
 };
 
 #include <linux/uaccess.h>
-#include <asm/pgtable.h>
 #include <asm/hwrpb.h>
 #include <asm/dma.h>
 #include <asm/mmu_context.h>
@@ -80,11 +79,6 @@ int alpha_l3_cacheshape;
 unsigned long alpha_verbose_mcheck = CONFIG_VERBOSE_MCHECK_ON;
 #endif
 
-#ifdef CONFIG_NUMA
-struct cpumask node_to_cpumask_map[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_to_cpumask_map);
-#endif
-
 /* Which processor we booted from.  */
 int boot_cpuid;
 
@@ -137,13 +131,14 @@ static void determine_cpu_caches (unsigned int);
 
 static char __initdata command_line[COMMAND_LINE_SIZE];
 
+#ifdef CONFIG_VGA_CONSOLE
 /*
  * The format of "screen_info" is strange, and due to early
  * i386-setup code. This is just enough to make the console
  * code think we're on a VGA color display.
  */
 
-struct screen_info screen_info = {
+struct screen_info vgacon_screen_info = {
 	.orig_x = 0,
 	.orig_y = 25,
 	.orig_video_cols = 80,
@@ -151,8 +146,7 @@ struct screen_info screen_info = {
 	.orig_video_isVGA = 1,
 	.orig_video_points = 16
 };
-
-EXPORT_SYMBOL(screen_info);
+#endif
 
 /*
  * The direct map I/O window, if any.  This should be the same
@@ -177,35 +171,22 @@ EXPORT_SYMBOL(__direct_map_size);
 	asm(".weak "#X)
 
 WEAK(alcor_mv);
-WEAK(alphabook1_mv);
-WEAK(avanti_mv);
-WEAK(cabriolet_mv);
 WEAK(clipper_mv);
 WEAK(dp264_mv);
 WEAK(eb164_mv);
-WEAK(eb64p_mv);
-WEAK(eb66_mv);
-WEAK(eb66p_mv);
 WEAK(eiger_mv);
-WEAK(jensen_mv);
 WEAK(lx164_mv);
-WEAK(lynx_mv);
 WEAK(marvel_ev7_mv);
 WEAK(miata_mv);
-WEAK(mikasa_mv);
 WEAK(mikasa_primo_mv);
 WEAK(monet_mv);
 WEAK(nautilus_mv);
-WEAK(noname_mv);
-WEAK(noritake_mv);
 WEAK(noritake_primo_mv);
-WEAK(p2k_mv);
 WEAK(pc164_mv);
 WEAK(privateer_mv);
 WEAK(rawhide_mv);
 WEAK(ruffian_mv);
 WEAK(rx164_mv);
-WEAK(sable_mv);
 WEAK(sable_gamma_mv);
 WEAK(shark_mv);
 WEAK(sx164_mv);
@@ -213,7 +194,6 @@ WEAK(takara_mv);
 WEAK(titan_mv);
 WEAK(webbrick_mv);
 WEAK(wildfire_mv);
-WEAK(xl_mv);
 WEAK(xlt_mv);
 
 #undef WEAK
@@ -230,7 +210,7 @@ static void __init
 reserve_std_resources(void)
 {
 	static struct resource standard_io_resources[] = {
-		{ .name = "rtc", .start = -1, .end = -1 },
+		{ .name = "rtc", .start = 0x70, .end =  0x7f},
         	{ .name = "dma1", .start = 0x00, .end = 0x1f },
         	{ .name = "pic1", .start = 0x20, .end = 0x3f },
         	{ .name = "timer", .start = 0x40, .end = 0x5f },
@@ -252,10 +232,6 @@ reserve_std_resources(void)
 			}
 	}
 
-	/* Fix up for the Jensen's queer RTC placement.  */
-	standard_io_resources[0].start = RTC_PORT(0);
-	standard_io_resources[0].end = RTC_PORT(0) + 0x10;
-
 	for (i = 0; i < ARRAY_SIZE(standard_io_resources); ++i)
 		request_resource(io, standard_io_resources+i);
 }
@@ -306,7 +282,6 @@ move_initrd(unsigned long mem_limit)
 }
 #endif
 
-#ifndef CONFIG_DISCONTIGMEM
 static void __init
 setup_memory(void *kernel_end)
 {
@@ -326,18 +301,19 @@ setup_memory(void *kernel_end)
 		       i, cluster->usage, cluster->start_pfn,
 		       cluster->start_pfn + cluster->numpages);
 
-		/* Bit 0 is console/PALcode reserved.  Bit 1 is
-		   non-volatile memory -- we might want to mark
-		   this for later.  */
-		if (cluster->usage & 3)
-			continue;
-
 		end = cluster->start_pfn + cluster->numpages;
 		if (end > max_low_pfn)
 			max_low_pfn = end;
 
 		memblock_add(PFN_PHYS(cluster->start_pfn),
 			     cluster->numpages << PAGE_SHIFT);
+
+		/* Bit 0 is console/PALcode reserved.  Bit 1 is
+		   non-volatile memory -- we might want to mark
+		   this for later.  */
+		if (cluster->usage & 3)
+			memblock_reserve(PFN_PHYS(cluster->start_pfn),
+				         cluster->numpages << PAGE_SHIFT);
 	}
 
 	/*
@@ -390,12 +366,8 @@ setup_memory(void *kernel_end)
 	}
 #endif /* CONFIG_BLK_DEV_INITRD */
 }
-#else
-extern void setup_memory(void *);
-#endif /* !CONFIG_DISCONTIGMEM */
 
-int __init
-page_is_ram(unsigned long pfn)
+int page_is_ram(unsigned long pfn)
 {
 	struct memclust_struct * cluster;
 	struct memdesc_struct * memdesc;
@@ -430,6 +402,20 @@ register_cpus(void)
 
 arch_initcall(register_cpus);
 
+#ifdef CONFIG_MAGIC_SYSRQ
+static void sysrq_reboot_handler(u8 unused)
+{
+	machine_halt();
+}
+
+static const struct sysrq_key_op srm_sysrq_reboot_op = {
+	.handler	= sysrq_reboot_handler,
+	.help_msg       = "reboot(b)",
+	.action_msg     = "Resetting",
+	.enable_mask    = SYSRQ_ENABLE_BOOT,
+};
+#endif
+
 void __init
 setup_arch(char **cmdline_p)
 {
@@ -466,7 +452,7 @@ setup_arch(char **cmdline_p)
 #ifndef alpha_using_srm
 	/* Assume that we've booted from SRM if we haven't booted from MILO.
 	   Detect the later by looking for "MILO" in the system serial nr.  */
-	alpha_using_srm = strncmp((const char *)hwrpb->ssn, "MILO", 4) != 0;
+	alpha_using_srm = !str_has_prefix((const char *)hwrpb->ssn, "MILO");
 #endif
 #ifndef alpha_using_qemu
 	/* Similarly, look for QEMU.  */
@@ -482,14 +468,7 @@ setup_arch(char **cmdline_p)
 	/* 
 	 * Locate the command line.
 	 */
-	/* Hack for Jensen... since we're restricted to 8 or 16 chars for
-	   boot flags depending on the boot mode, we need some shorthand.
-	   This should do for installation.  */
-	if (strcmp(COMMAND_LINE, "INSTALL") == 0) {
-		strlcpy(command_line, "root=/dev/fd0 load_ramdisk=1", sizeof command_line);
-	} else {
-		strlcpy(command_line, COMMAND_LINE, sizeof command_line);
-	}
+	strscpy(command_line, COMMAND_LINE, sizeof(command_line));
 	strcpy(boot_command_line, command_line);
 	*cmdline_p = command_line;
 
@@ -550,8 +529,8 @@ setup_arch(char **cmdline_p)
 	/* If we're using SRM, make sysrq-b halt back to the prom,
 	   not auto-reboot.  */
 	if (alpha_using_srm) {
-		struct sysrq_key_op *op = __sysrq_get_key_op('b');
-		op->handler = (void *) machine_halt;
+		unregister_sysrq_key('b', __sysrq_reboot_op);
+		register_sysrq_key('b', &srm_sysrq_reboot_op);
 	}
 #endif
 
@@ -605,13 +584,6 @@ setup_arch(char **cmdline_p)
 	       "VERBOSE_MCHECK "
 #endif
 
-#ifdef CONFIG_DISCONTIGMEM
-	       "DISCONTIGMEM "
-#ifdef CONFIG_NUMA
-	       "NUMA "
-#endif
-#endif
-
 #ifdef CONFIG_DEBUG_SPINLOCK
 	       "DEBUG_SPINLOCK "
 #endif
@@ -635,6 +607,7 @@ setup_arch(char **cmdline_p)
 	/* Find our memory.  */
 	setup_memory(kernel_end);
 	memblock_set_bottom_up(true);
+	sparse_init();
 
 	/* First guess at cpu cache sizes.  Do this before init_arch.  */
 	determine_cpu_caches(cpu->type);
@@ -654,14 +627,12 @@ setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
+	vgacon_register_screen(&vgacon_screen_info);
 #endif
 #endif
 
 	/* Default root filesystem to sda2.  */
-	ROOT_DEV = Root_SDA2;
+	ROOT_DEV = MKDEV(SCSI_DISK0_MAJOR, 2);
 
 #ifdef CONFIG_EISA
 	/* FIXME:  only set this when we actually have EISA in this box? */
@@ -710,12 +681,6 @@ static int eb164_indices[] = {0,0,0,1,1,1,1,1,2,2,2,2,3,3,3,3,4};
 static char alcor_names[][16] = {"Alcor", "Maverick", "Bret"};
 static int alcor_indices[] = {0,0,0,1,1,1,0,0,0,0,0,0,2,2,2,2,2,2};
 
-static char eb64p_names[][16] = {"EB64+", "Cabriolet", "AlphaPCI64"};
-static int eb64p_indices[] = {0,0,1,2};
-
-static char eb66_names[][8] = {"EB66", "EB66+"};
-static int eb66_indices[] = {0,0,1};
-
 static char marvel_names[][16] = {
 	"Marvel/EV7"
 };
@@ -749,26 +714,26 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 		NULL,		/* Ruby */
 		NULL,		/* Flamingo */
 		NULL,		/* Mannequin */
-		&jensen_mv,
+		NULL,		/* Jensens */
 		NULL, 		/* Pelican */
 		NULL,		/* Morgan */
 		NULL,		/* Sable -- see below.  */
 		NULL,		/* Medulla */
-		&noname_mv,
+		NULL,		/* Noname */
 		NULL,		/* Turbolaser */
-		&avanti_mv,
+		NULL,		/* Avanti */
 		NULL,		/* Mustang */
 		NULL,		/* Alcor, Bret, Maverick. HWRPB inaccurate? */
 		NULL,		/* Tradewind */
 		NULL,		/* Mikasa -- see below.  */
 		NULL,		/* EB64 */
-		NULL,		/* EB66 -- see variation.  */
-		NULL,		/* EB64+ -- see variation.  */
-		&alphabook1_mv,
+		NULL,		/* EB66 */
+		NULL,		/* EB64+ */
+		NULL,		/* Alphabook1 */
 		&rawhide_mv,
 		NULL,		/* K2 */
-		&lynx_mv,	/* Lynx */
-		&xl_mv,
+		NULL,		/* Lynx */
+		NULL,		/* XL */
 		NULL,		/* EB164 -- see variation.  */
 		NULL,		/* Noritake -- see below.  */
 		NULL,		/* Cortex */
@@ -807,19 +772,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 		&eb164_mv, &pc164_mv, &lx164_mv, &sx164_mv, &rx164_mv
 	};
 
-	static struct alpha_machine_vector *eb64p_vecs[] __initdata =
-	{
-		&eb64p_mv,
-		&cabriolet_mv,
-		&cabriolet_mv		/* AlphaPCI64 */
-	};
-
-	static struct alpha_machine_vector *eb66_vecs[] __initdata =
-	{
-		&eb66_mv,
-		&eb66p_mv
-	};
-
 	static struct alpha_machine_vector *marvel_vecs[] __initdata =
 	{
 		&marvel_ev7_mv,
@@ -887,14 +839,6 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 			if (vec == &eb164_mv && cpu == EV56_CPU)
 				vec = &pc164_mv;
 			break;
-		case ST_DEC_EB64P:
-			if (member < ARRAY_SIZE(eb64p_indices))
-				vec = eb64p_vecs[eb64p_indices[member]];
-			break;
-		case ST_DEC_EB66:
-			if (member < ARRAY_SIZE(eb66_indices))
-				vec = eb66_vecs[eb66_indices[member]];
-			break;
 		case ST_DEC_MARVEL:
 			if (member < ARRAY_SIZE(marvel_indices))
 				vec = marvel_vecs[marvel_indices[member]];
@@ -909,22 +853,13 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
 				vec = tsunami_vecs[tsunami_indices[member]];
 			break;
 		case ST_DEC_1000:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &mikasa_primo_mv;
-			else
-				vec = &mikasa_mv;
+			vec = &mikasa_primo_mv;
 			break;
 		case ST_DEC_NORITAKE:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &noritake_primo_mv;
-			else
-				vec = &noritake_mv;
+			vec = &noritake_primo_mv;
 			break;
 		case ST_DEC_2100_A500:
-			if (cpu == EV5_CPU || cpu == EV56_CPU)
-				vec = &sable_gamma_mv;
-			else
-				vec = &sable_mv;
+			vec = &sable_gamma_mv;
 			break;
 		}
 	}
@@ -937,41 +872,27 @@ get_sysvec_byname(const char *name)
 	static struct alpha_machine_vector *all_vecs[] __initdata =
 	{
 		&alcor_mv,
-		&alphabook1_mv,
-		&avanti_mv,
-		&cabriolet_mv,
 		&clipper_mv,
 		&dp264_mv,
 		&eb164_mv,
-		&eb64p_mv,
-		&eb66_mv,
-		&eb66p_mv,
 		&eiger_mv,
-		&jensen_mv,
 		&lx164_mv,
-		&lynx_mv,
 		&miata_mv,
-		&mikasa_mv,
 		&mikasa_primo_mv,
 		&monet_mv,
 		&nautilus_mv,
-		&noname_mv,
-		&noritake_mv,
 		&noritake_primo_mv,
-		&p2k_mv,
 		&pc164_mv,
 		&privateer_mv,
 		&rawhide_mv,
 		&ruffian_mv,
 		&rx164_mv,
-		&sable_mv,
 		&sable_gamma_mv,
 		&shark_mv,
 		&sx164_mv,
 		&takara_mv,
 		&webbrick_mv,
 		&wildfire_mv,
-		&xl_mv,
 		&xlt_mv
 	};
 
@@ -1033,14 +954,6 @@ get_sysnames(unsigned long type, unsigned long variation, unsigned long cpu,
 		if (member < ARRAY_SIZE(alcor_indices))
 			*variation_name = alcor_names[alcor_indices[member]];
 		break;
-	case ST_DEC_EB64P:
-		if (member < ARRAY_SIZE(eb64p_indices))
-			*variation_name = eb64p_names[eb64p_indices[member]];
-		break;
-	case ST_DEC_EB66:
-		if (member < ARRAY_SIZE(eb66_indices))
-			*variation_name = eb66_names[eb66_indices[member]];
-		break;
 	case ST_DEC_MARVEL:
 		if (member < ARRAY_SIZE(marvel_indices))
 			*variation_name = marvel_names[marvel_indices[member]];
@@ -1414,6 +1327,7 @@ c_start(struct seq_file *f, loff_t *pos)
 static void *
 c_next(struct seq_file *f, void *v, loff_t *pos)
 {
+	(*pos)++;
 	return NULL;
 }
 
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index a813020d2f11..e62d1d461b1f 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -22,7 +22,7 @@
 #include <linux/binfmts.h>
 #include <linux/bitops.h>
 #include <linux/syscalls.h>
-#include <linux/tracehook.h>
+#include <linux/resume_user_mode.h>
 
 #include <linux/uaccess.h>
 #include <asm/sigcontext.h>
@@ -150,9 +150,10 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 {
 	unsigned long usp;
 	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	long i, err = __get_user(regs->pc, &sc->sc_pc);
+	long err = __get_user(regs->pc, &sc->sc_pc);
 
 	current->restart_block.fn = do_no_restart_syscall;
+	current_thread_info()->status |= TS_SAVED_FP | TS_RESTORE_FP;
 
 	sw->r26 = (unsigned long) ret_from_sys_call;
 
@@ -189,9 +190,9 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 	err |= __get_user(usp, sc->sc_regs+30);
 	wrusp(usp);
 
-	for (i = 0; i < 31; i++)
-		err |= __get_user(sw->fp[i], sc->sc_fpregs+i);
-	err |= __get_user(sw->fp[31], &sc->sc_fpcr);
+	err |= __copy_from_user(current_thread_info()->fp,
+				sc->sc_fpregs, 31 * 8);
+	err |= __get_user(current_thread_info()->fp[31], &sc->sc_fpcr);
 
 	return err;
 }
@@ -219,7 +220,7 @@ do_sigreturn(struct sigcontext __user *sc)
 
 	/* Send SIGTRAP if we're single-stepping: */
 	if (ptrace_cancel_bpt (current)) {
-		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *) regs->pc, 0,
+		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *) regs->pc,
 			       current);
 	}
 	return;
@@ -247,7 +248,7 @@ do_rt_sigreturn(struct rt_sigframe __user *frame)
 
 	/* Send SIGTRAP if we're single-stepping: */
 	if (ptrace_cancel_bpt (current)) {
-		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *) regs->pc, 0,
+		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *) regs->pc,
 			       current);
 	}
 	return;
@@ -272,7 +273,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 		 unsigned long mask, unsigned long sp)
 {
 	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	long i, err = 0;
+	long err = 0;
 
 	err |= __put_user(on_sig_stack((unsigned long)sc), &sc->sc_onstack);
 	err |= __put_user(mask, &sc->sc_mask);
@@ -312,10 +313,10 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	err |= __put_user(sp, sc->sc_regs+30);
 	err |= __put_user(0, sc->sc_regs+31);
 
-	for (i = 0; i < 31; i++)
-		err |= __put_user(sw->fp[i], sc->sc_fpregs+i);
+	err |= __copy_to_user(sc->sc_fpregs,
+			      current_thread_info()->fp, 31 * 8);
 	err |= __put_user(0, sc->sc_fpregs+31);
-	err |= __put_user(sw->fp[31], &sc->sc_fpcr);
+	err |= __put_user(current_thread_info()->fp[31], &sc->sc_fpcr);
 
 	err |= __put_user(regs->trap_a0, &sc->sc_traparg_a0);
 	err |= __put_user(regs->trap_a1, &sc->sc_traparg_a1);
@@ -453,7 +454,7 @@ syscall_restart(unsigned long r0, unsigned long r19,
 			regs->r0 = EINTR;
 			break;
 		}
-		/* fallthrough */
+		fallthrough;
 	case ERESTARTNOINTR:
 		regs->r0 = r0;	/* reset v0 and a3 and replay syscall */
 		regs->r19 = r19;
@@ -527,15 +528,17 @@ do_work_pending(struct pt_regs *regs, unsigned long thread_flags,
 			schedule();
 		} else {
 			local_irq_enable();
-			if (thread_flags & _TIF_SIGPENDING) {
+			if (thread_flags & (_TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL)) {
+				preempt_disable();
+				save_fpu();
+				preempt_enable();
 				do_signal(regs, r0, r19);
 				r0 = 0;
 			} else {
-				clear_thread_flag(TIF_NOTIFY_RESUME);
-				tracehook_notify_resume(regs);
+				resume_user_mode_work(regs);
 			}
 		}
 		local_irq_disable();
-		thread_flags = current_thread_info()->flags;
+		thread_flags = read_thread_flags();
 	} while (thread_flags & _TIF_WORK_MASK);
 }
diff --git a/arch/alpha/kernel/smc37c669.c b/arch/alpha/kernel/smc37c669.c
index bbbd34586de0..a5a6ed97a6ce 100644
--- a/arch/alpha/kernel/smc37c669.c
+++ b/arch/alpha/kernel/smc37c669.c
@@ -11,6 +11,8 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
+#include "proto.h"
+
 #if 0
 # define DBG_DEVS(args)         printk args
 #else
@@ -2430,13 +2432,15 @@ int __init smcc669_write( struct FILE *fp, int size, int number, unsigned char *
 }
 #endif
 
-void __init
+#if SMC_DEBUG
+static void __init
 SMC37c669_dump_registers(void)
 {
   int i;
   for (i = 0; i <= 0x29; i++)
     printk("-- CR%02x : %02x\n", i, SMC37c669_read_config(i));
 }
+#endif
 /*+
  * ============================================================================
  * = SMC_init - SMC37c669 Super I/O controller initialization                 =
diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c
index 71cd7aca38ce..8028273f0d16 100644
--- a/arch/alpha/kernel/smc37c93x.c
+++ b/arch/alpha/kernel/smc37c93x.c
@@ -12,6 +12,8 @@
 #include <asm/hwrpb.h>
 #include <asm/io.h>
 
+#include "proto.h"
+
 #define SMC_DEBUG 0
 
 #if SMC_DEBUG
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 5f90df30be20..ed06367ece57 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -36,10 +36,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
 #include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
 
 #include "proto.h"
 #include "irq_impl.h"
@@ -168,7 +167,6 @@ smp_callin(void)
 	DBGS(("smp_callin: commencing CPU %d current %p active_mm %p\n",
 	      cpuid, current, current->active_mm));
 
-	preempt_disable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
@@ -470,11 +468,6 @@ smp_prepare_cpus(unsigned int max_cpus)
 	smp_num_cpus = smp_num_probed;
 }
 
-void
-smp_prepare_boot_cpu(void)
-{
-}
-
 int
 __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
@@ -500,12 +493,6 @@ smp_cpus_done(unsigned int max_cpus)
 	       ((bogosum + 2500) / (5000/HZ)) % 100);
 }
 
-int
-setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
 static void
 send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
 {
@@ -571,7 +558,7 @@ handle_ipi(struct pt_regs *regs)
 }
 
 void
-smp_send_reschedule(int cpu)
+arch_smp_send_reschedule(int cpu)
 {
 #ifdef DEBUG_IPI_MSG
 	if (cpu == hard_smp_processor_id())
@@ -585,7 +572,7 @@ void
 smp_send_stop(void)
 {
 	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
+	cpumask_copy(&to_whom, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &to_whom);
 #ifdef DEBUG_IPI_MSG
 	if (hard_smp_processor_id() != boot_cpu_id)
@@ -637,7 +624,7 @@ flush_tlb_all(void)
 static void
 ipi_flush_tlb_mm(void *x)
 {
-	struct mm_struct *mm = (struct mm_struct *) x;
+	struct mm_struct *mm = x;
 	if (mm == current->active_mm && !asn_locked())
 		flush_tlb_current(mm);
 	else
@@ -679,7 +666,7 @@ struct flush_tlb_page_struct {
 static void
 ipi_flush_tlb_page(void *x)
 {
-	struct flush_tlb_page_struct *data = (struct flush_tlb_page_struct *)x;
+	struct flush_tlb_page_struct *data = x;
 	struct mm_struct * mm = data->mm;
 
 	if (mm == current->active_mm && !asn_locked())
@@ -740,7 +727,7 @@ ipi_flush_icache_page(void *x)
 }
 
 void
-flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+flush_icache_user_page(struct vm_area_struct *vma, struct page *page,
 			unsigned long addr, int len)
 {
 	struct mm_struct *mm = vma->vm_mm;
diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c
index 7268222cf4e1..217b4dca51dd 100644
--- a/arch/alpha/kernel/srm_env.c
+++ b/arch/alpha/kernel/srm_env.c
@@ -83,14 +83,14 @@ static int srm_env_proc_show(struct seq_file *m, void *v)
 
 static int srm_env_proc_open(struct inode *inode, struct file *file)
 {
-	return single_open(file, srm_env_proc_show, PDE_DATA(inode));
+	return single_open(file, srm_env_proc_show, pde_data(inode));
 }
 
 static ssize_t srm_env_proc_write(struct file *file, const char __user *buffer,
 				  size_t count, loff_t *pos)
 {
 	int res;
-	unsigned long	id = (unsigned long)PDE_DATA(file_inode(file));
+	unsigned long	id = (unsigned long)pde_data(file_inode(file));
 	char		*buf = (char *) __get_free_page(GFP_USER);
 	unsigned long	ret1, ret2;
 
@@ -119,13 +119,12 @@ static ssize_t srm_env_proc_write(struct file *file, const char __user *buffer,
 	return res;
 }
 
-static const struct file_operations srm_env_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= srm_env_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= srm_env_proc_write,
+static const struct proc_ops srm_env_proc_ops = {
+	.proc_open	= srm_env_proc_open,
+	.proc_read	= seq_read,
+	.proc_lseek	= seq_lseek,
+	.proc_release	= single_release,
+	.proc_write	= srm_env_proc_write,
 };
 
 static int __init
@@ -182,7 +181,7 @@ srm_env_init(void)
 	entry = srm_named_entries;
 	while (entry->name && entry->id) {
 		if (!proc_create_data(entry->name, 0644, named_dir,
-			     &srm_env_proc_fops, (void *)entry->id))
+			     &srm_env_proc_ops, (void *)entry->id))
 			goto cleanup;
 		entry++;
 	}
@@ -194,7 +193,7 @@ srm_env_init(void)
 		char name[4];
 		sprintf(name, "%ld", var_num);
 		if (!proc_create_data(name, 0644, numbered_dir,
-			     &srm_env_proc_fops, (void *)var_num))
+			     &srm_env_proc_ops, (void *)var_num))
 			goto cleanup;
 	}
 
diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c
index 438b10c44d73..d19e51ec711d 100644
--- a/arch/alpha/kernel/srmcons.c
+++ b/arch/alpha/kernel/srmcons.c
@@ -21,6 +21,8 @@
 #include <asm/console.h>
 #include <linux/uaccess.h>
 
+#include "proto.h"
+
 
 static DEFINE_SPINLOCK(srmcons_callback_lock);
 static int srm_is_registered_console = 0;
@@ -53,13 +55,13 @@ srmcons_do_receive_chars(struct tty_port *port)
 	do {
 		result.as_long = callback_getc(0);
 		if (result.bits.status < 2) {
-			tty_insert_flip_char(port, (char)result.bits.c, 0);
+			tty_insert_flip_char(port, (u8)result.bits.c, 0);
 			count++;
 		}
 	} while((result.bits.status & 1) && (++loops < 10));
 
 	if (count)
-		tty_schedule_flip(port);
+		tty_flip_buffer_push(port);
 
 	return count;
 }
@@ -67,7 +69,8 @@ srmcons_do_receive_chars(struct tty_port *port)
 static void
 srmcons_receive_chars(struct timer_list *t)
 {
-	struct srmcons_private *srmconsp = from_timer(srmconsp, t, timer);
+	struct srmcons_private *srmconsp = timer_container_of(srmconsp, t,
+							      timer);
 	struct tty_port *port = &srmconsp->port;
 	unsigned long flags;
 	int incr = 10;
@@ -88,30 +91,27 @@ srmcons_receive_chars(struct timer_list *t)
 }
 
 /* called with callback_lock held */
-static int
-srmcons_do_write(struct tty_port *port, const char *buf, int count)
+static void
+srmcons_do_write(struct tty_port *port, const u8 *buf, size_t count)
 {
-	static char str_cr[1] = "\r";
-	long c, remaining = count;
+	size_t c;
 	srmcons_result result;
-	char *cur;
-	int need_cr;
 
-	for (cur = (char *)buf; remaining > 0; ) {
-		need_cr = 0;
+	while (count > 0) {
+		bool need_cr = false;
 		/* 
 		 * Break it up into reasonable size chunks to allow a chance
 		 * for input to get in
 		 */
-		for (c = 0; c < min_t(long, 128L, remaining) && !need_cr; c++)
-			if (cur[c] == '\n')
-				need_cr = 1;
+		for (c = 0; c < min_t(size_t, 128U, count) && !need_cr; c++)
+			if (buf[c] == '\n')
+				need_cr = true;
 		
 		while (c > 0) {
-			result.as_long = callback_puts(0, cur, c);
+			result.as_long = callback_puts(0, buf, c);
 			c -= result.bits.c;
-			remaining -= result.bits.c;
-			cur += result.bits.c;
+			count -= result.bits.c;
+			buf += result.bits.c;
 
 			/*
 			 * Check for pending input iff a tty port was provided
@@ -121,40 +121,32 @@ srmcons_do_write(struct tty_port *port, const char *buf, int count)
 		}
 
 		while (need_cr) {
-			result.as_long = callback_puts(0, str_cr, 1);
+			result.as_long = callback_puts(0, "\r", 1);
 			if (result.bits.c > 0)
-				need_cr = 0;
+				need_cr = false;
 		}
 	}
-	return count;
 }
 
-static int
-srmcons_write(struct tty_struct *tty,
-	      const unsigned char *buf, int count)
+static ssize_t
+srmcons_write(struct tty_struct *tty, const u8 *buf, size_t count)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&srmcons_callback_lock, flags);
-	srmcons_do_write(tty->port, (const char *) buf, count);
+	srmcons_do_write(tty->port, buf, count);
 	spin_unlock_irqrestore(&srmcons_callback_lock, flags);
 
 	return count;
 }
 
-static int
+static unsigned int
 srmcons_write_room(struct tty_struct *tty)
 {
 	return 512;
 }
 
 static int
-srmcons_chars_in_buffer(struct tty_struct *tty)
-{
-	return 0;
-}
-
-static int
 srmcons_open(struct tty_struct *tty, struct file *filp)
 {
 	struct srmcons_private *srmconsp = &srmcons_singleton;
@@ -186,7 +178,7 @@ srmcons_close(struct tty_struct *tty, struct file *filp)
 
 	if (tty->count == 1) {
 		port->tty = NULL;
-		del_timer(&srmconsp->timer);
+		timer_delete(&srmconsp->timer);
 	}
 
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -200,46 +192,49 @@ static const struct tty_operations srmcons_ops = {
 	.close		= srmcons_close,
 	.write		= srmcons_write,
 	.write_room	= srmcons_write_room,
-	.chars_in_buffer= srmcons_chars_in_buffer,
 };
 
 static int __init
 srmcons_init(void)
 {
+	struct tty_driver *driver;
+	int err;
+
 	timer_setup(&srmcons_singleton.timer, srmcons_receive_chars, 0);
-	if (srm_is_registered_console) {
-		struct tty_driver *driver;
-		int err;
-
-		driver = alloc_tty_driver(MAX_SRM_CONSOLE_DEVICES);
-		if (!driver)
-			return -ENOMEM;
-
-		tty_port_init(&srmcons_singleton.port);
-
-		driver->driver_name = "srm";
-		driver->name = "srm";
-		driver->major = 0; 	/* dynamic */
-		driver->minor_start = 0;
-		driver->type = TTY_DRIVER_TYPE_SYSTEM;
-		driver->subtype = SYSTEM_TYPE_SYSCONS;
-		driver->init_termios = tty_std_termios;
-		tty_set_operations(driver, &srmcons_ops);
-		tty_port_link_device(&srmcons_singleton.port, driver, 0);
-		err = tty_register_driver(driver);
-		if (err) {
-			put_tty_driver(driver);
-			tty_port_destroy(&srmcons_singleton.port);
-			return err;
-		}
-		srmcons_driver = driver;
-	}
 
-	return -ENODEV;
+	if (!srm_is_registered_console)
+		return -ENODEV;
+
+	driver = tty_alloc_driver(MAX_SRM_CONSOLE_DEVICES, 0);
+	if (IS_ERR(driver))
+		return PTR_ERR(driver);
+
+	tty_port_init(&srmcons_singleton.port);
+
+	driver->driver_name = "srm";
+	driver->name = "srm";
+	driver->major = 0;	/* dynamic */
+	driver->minor_start = 0;
+	driver->type = TTY_DRIVER_TYPE_SYSTEM;
+	driver->subtype = SYSTEM_TYPE_SYSCONS;
+	driver->init_termios = tty_std_termios;
+	tty_set_operations(driver, &srmcons_ops);
+	tty_port_link_device(&srmcons_singleton.port, driver, 0);
+	err = tty_register_driver(driver);
+	if (err)
+		goto err_free_drv;
+
+	srmcons_driver = driver;
+
+	return 0;
+err_free_drv:
+	tty_driver_kref_put(driver);
+	tty_port_destroy(&srmcons_singleton.port);
+
+	return err;
 }
 device_initcall(srmcons_init);
 
-
 /*
  * The console driver
  */
diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c
index e56efd5b855f..e063b3857b3d 100644
--- a/arch/alpha/kernel/sys_alcor.c
+++ b/arch/alpha/kernel/sys_alcor.c
@@ -23,7 +23,6 @@
 #include <asm/dma.h>
 #include <asm/mmu_context.h>
 #include <asm/irq.h>
-#include <asm/pgtable.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
@@ -133,7 +132,8 @@ alcor_init_irq(void)
 	init_i8259a_irqs();
 	common_init_isa_dma();
 
-	setup_irq(16+31, &isa_cascade_irqaction);
+	if (request_irq(16 + 31, no_action, 0, "isa-cascade", NULL))
+		pr_err("Failed to register isa-cascade interrupt\n");
 }
 
 
diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c
index 10bc46a4ec40..54e75d4fdbe3 100644
--- a/arch/alpha/kernel/sys_cabriolet.c
+++ b/arch/alpha/kernel/sys_cabriolet.c
@@ -6,8 +6,7 @@
  *	Copyright (C) 1996 Jay A Estabrook
  *	Copyright (C) 1998, 1999, 2000 Richard Henderson
  *
- * Code supporting the Cabriolet (AlphaPC64), EB66+, and EB164,
- * PC164 and LX164.
+ * Code supporting the PC164 and LX164.
  */
 
 #include <linux/kernel.h>
@@ -23,10 +22,7 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
-#include <asm/core_lca.h>
 #include <asm/tlbflush.h>
 
 #include "proto.h"
@@ -112,7 +108,8 @@ common_init_irq(void (*srm_dev_int)(unsigned long v))
 	}
 
 	common_init_isa_dma();
-	setup_irq(16+4, &isa_cascade_irqaction);
+	if (request_irq(16 + 4, no_action, 0, "isa-cascade", NULL))
+		pr_err("Failed to register isa-cascade interrupt\n");
 }
 
 #ifndef CONFIG_ALPHA_PC164
@@ -233,13 +230,6 @@ cabriolet_enable_ide(void)
 }
 
 static inline void __init
-cabriolet_init_pci(void)
-{
-	common_init_pci();
-	cabriolet_enable_ide();
-}
-
-static inline void __init
 cia_cab_init_pci(void)
 {
 	cia_init_pci();
@@ -317,81 +307,6 @@ alphapc164_init_pci(void)
  * The System Vector
  */
 
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-struct alpha_machine_vector cabriolet_mv __initmv = {
-	.vector_name		= "Cabriolet",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cabriolet_init_pci,
-	.pci_map_irq		= cabriolet_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-#ifndef CONFIG_ALPHA_EB64P
-ALIAS_MV(cabriolet)
-#endif
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
-struct alpha_machine_vector eb164_mv __initmv = {
-	.vector_name		= "EB164",
-	DO_EV5_MMU,
-	DO_DEFAULT_RTC,
-	DO_CIA_IO,
-	.machine_check		= cia_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= CIA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= cia_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cia_cab_init_pci,
-	.kill_arch		= cia_kill_arch,
-	.pci_map_irq		= cabriolet_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb164)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P)
-struct alpha_machine_vector eb66p_mv __initmv = {
-	.vector_name		= "EB66+",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 35,
-	.device_interrupt	= cabriolet_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= cabriolet_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= cabriolet_init_pci,
-	.pci_map_irq		= eb66p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb66p)
-#endif
-
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
 struct alpha_machine_vector lx164_mv __initmv = {
 	.vector_name		= "LX164",
diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c
index d33508621820..9fb445d7dca5 100644
--- a/arch/alpha/kernel/sys_dp264.c
+++ b/arch/alpha/kernel/sys_dp264.c
@@ -26,7 +26,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_tsunami.h>
 #include <asm/hwrpb.h>
 #include <asm/tlbflush.h>
diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c
deleted file mode 100644
index 5251937ec1b4..000000000000
--- a/arch/alpha/kernel/sys_eb64p.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_eb64p.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the EB64+ and EB66.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/hwrpb.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/* Note mask bit is true for DISABLED irqs.  */
-static unsigned int cached_irq_mask = -1;
-
-static inline void
-eb64p_update_irq_hw(unsigned int irq, unsigned long mask)
-{
-	outb(mask >> (irq >= 24 ? 24 : 16), (irq >= 24 ? 0x27 : 0x26));
-}
-
-static inline void
-eb64p_enable_irq(struct irq_data *d)
-{
-	eb64p_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
-}
-
-static void
-eb64p_disable_irq(struct irq_data *d)
-{
-	eb64p_update_irq_hw(d->irq, cached_irq_mask |= 1 << d->irq);
-}
-
-static struct irq_chip eb64p_irq_type = {
-	.name		= "EB64P",
-	.irq_unmask	= eb64p_enable_irq,
-	.irq_mask	= eb64p_disable_irq,
-	.irq_mask_ack	= eb64p_disable_irq,
-};
-
-static void 
-eb64p_device_interrupt(unsigned long vector)
-{
-	unsigned long pld;
-	unsigned int i;
-
-	/* Read the interrupt summary registers */
-	pld = inb(0x26) | (inb(0x27) << 8);
-
-	/*
-	 * Now, for every possible bit set, work through
-	 * them and call the appropriate interrupt handler.
-	 */
-	while (pld) {
-		i = ffz(~pld);
-		pld &= pld - 1;	/* clear least bit set */
-
-		if (i == 5) {
-			isa_device_interrupt(vector);
-		} else {
-			handle_irq(16 + i);
-		}
-	}
-}
-
-static void __init
-eb64p_init_irq(void)
-{
-	long i;
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
-	/*
-	 * CABRIO SRM may not set variation correctly, so here we test
-	 * the high word of the interrupt summary register for the RAZ
-	 * bits, and hope that a true EB64+ would read all ones...
-	 */
-	if (inw(0x806) != 0xffff) {
-		extern struct alpha_machine_vector cabriolet_mv;
-
-		printk("Detected Cabriolet: correcting HWRPB.\n");
-
-		hwrpb->sys_variation |= 2L << 10;
-		hwrpb_update_checksum(hwrpb);
-
-		alpha_mv = cabriolet_mv;
-		alpha_mv.init_irq();
-		return;
-	}
-#endif /* GENERIC */
-
-	outb(0xff, 0x26);
-	outb(0xff, 0x27);
-
-	init_i8259a_irqs();
-
-	for (i = 16; i < 32; ++i) {
-		irq_set_chip_and_handler(i, &eb64p_irq_type, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-	}
-
-	common_init_isa_dma();
-	setup_irq(16+5, &isa_cascade_irqaction);
-}
-
-/*
- * PCI Fixup configuration.
- *
- * There are two 8 bit external summary registers as follows:
- *
- * Summary @ 0x26:
- * Bit      Meaning
- * 0        Interrupt Line A from slot 0
- * 1        Interrupt Line A from slot 1
- * 2        Interrupt Line B from slot 0
- * 3        Interrupt Line B from slot 1
- * 4        Interrupt Line C from slot 0
- * 5        Interrupt line from the two ISA PICs
- * 6        Tulip
- * 7        NCR SCSI
- *
- * Summary @ 0x27
- * Bit      Meaning
- * 0        Interrupt Line C from slot 1
- * 1        Interrupt Line D from slot 0
- * 2        Interrupt Line D from slot 1
- * 3        RAZ
- * 4        RAZ
- * 5        RAZ
- * 6        RAZ
- * 7        RAZ
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  5       NCR SCSI controller
- *  6       PCI on board slot 0
- *  7       PCI on board slot 1
- *  8       Intel SIO PCI-ISA bridge chip
- *  9       Tulip - DECchip 21040 Ethernet controller
- *   
- *
- * This two layered interrupt approach means that we allocate IRQ 16 and 
- * above for PCI interrupts.  The IRQ relates to which bit the interrupt
- * comes in on.  This makes interrupt processing much easier.
- */
-
-static int
-eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[5][5] = {
-		/*INT  INTA  INTB  INTC   INTD */
-		{16+7, 16+7, 16+7, 16+7,  16+7},  /* IdSel 5,  slot ?, ?? */
-		{16+0, 16+0, 16+2, 16+4,  16+9},  /* IdSel 6,  slot ?, ?? */
-		{16+1, 16+1, 16+3, 16+8, 16+10},  /* IdSel 7,  slot ?, ?? */
-		{  -1,   -1,   -1,   -1,    -1},  /* IdSel 8,  SIO */
-		{16+6, 16+6, 16+6, 16+6,  16+6},  /* IdSel 9,  TULIP */
-	};
-	const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-
-/*
- * The System Vector
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB64P)
-struct alpha_machine_vector eb64p_mv __initmv = {
-	.vector_name		= "EB64+",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= eb64p_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= eb64p_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.kill_arch		= NULL,
-	.pci_map_irq		= eb64p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb64p)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66)
-struct alpha_machine_vector eb66_mv __initmv = {
-	.vector_name		= "EB66",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= eb64p_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= eb64p_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= eb64p_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(eb66)
-#endif
diff --git a/arch/alpha/kernel/sys_eiger.c b/arch/alpha/kernel/sys_eiger.c
index 016f79251141..aea8a54da4bc 100644
--- a/arch/alpha/kernel/sys_eiger.c
+++ b/arch/alpha/kernel/sys_eiger.c
@@ -23,7 +23,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_tsunami.h>
 #include <asm/hwrpb.h>
 #include <asm/tlbflush.h>
@@ -176,7 +175,7 @@ eiger_swizzle(struct pci_dev *dev, u8 *pinp)
 	   case 0x03: bridge_count = 2; break; /* 2 */
 	   case 0x07: bridge_count = 3; break; /* 3 */
 	   case 0x0f: bridge_count = 4; break; /* 4 */
-	};
+	}
 
 	slot = PCI_SLOT(dev->devfn);
 	while (dev->bus->self) {
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
deleted file mode 100644
index d0d44f543d77..000000000000
--- a/arch/alpha/kernel/sys_jensen.c
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_jensen.c
- *
- *	Copyright (C) 1995 Linus Torvalds
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code supporting the Jensen.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/ptrace.h>
-
-#define __EXTERN_INLINE inline
-#include <asm/io.h>
-#include <asm/jensen.h>
-#undef  __EXTERN_INLINE
-
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-
-
-/*
- * Jensen is special: the vector is 0x8X0 for EISA interrupt X, and
- * 0x9X0 for the local motherboard interrupts.
- *
- * Note especially that those local interrupts CANNOT be masked,
- * which causes much of the pain below...
- *
- *	0x660 - NMI
- *
- *	0x800 - IRQ0  interval timer (not used, as we use the RTC timer)
- *	0x810 - IRQ1  line printer (duh..)
- *	0x860 - IRQ6  floppy disk
- *
- *	0x900 - COM1
- *	0x920 - COM2
- *	0x980 - keyboard
- *	0x990 - mouse
- *
- * PCI-based systems are more sane: they don't have the local
- * interrupts at all, and have only normal PCI interrupts from
- * devices.  Happily it's easy enough to do a sane mapping from the
- * Jensen.
- * 
- * Note that this means that we may have to do a hardware
- * "local_op" to a different interrupt than we report to the rest of the
- * world.
- */
-
-static void
-jensen_local_enable(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_enable_irq(d);
-}
-
-static void
-jensen_local_disable(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_disable_irq(d);
-}
-
-static void
-jensen_local_mask_ack(struct irq_data *d)
-{
-	/* the parport is really hw IRQ 1, silly Jensen.  */
-	if (d->irq == 7)
-		i8259a_mask_and_ack_irq(d);
-}
-
-static struct irq_chip jensen_local_irq_type = {
-	.name		= "LOCAL",
-	.irq_unmask	= jensen_local_enable,
-	.irq_mask	= jensen_local_disable,
-	.irq_mask_ack	= jensen_local_mask_ack,
-};
-
-static void 
-jensen_device_interrupt(unsigned long vector)
-{
-	int irq;
-
-	switch (vector) {
-	case 0x660:
-		printk("Whee.. NMI received. Probable hardware error\n");
-		printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461));
-		return;
-
-	/* local device interrupts: */
-	case 0x900: irq = 4; break;		/* com1 -> irq 4 */
-	case 0x920: irq = 3; break;		/* com2 -> irq 3 */
-	case 0x980: irq = 1; break;		/* kbd -> irq 1 */
-	case 0x990: irq = 9; break;		/* mouse -> irq 9 */
-
-	default:
-		if (vector > 0x900) {
-			printk("Unknown local interrupt %lx\n", vector);
-			return;
-		}
-
-		irq = (vector - 0x800) >> 4;
-		if (irq == 1)
-			irq = 7;
-		break;
-	}
-
-	/* If there is no handler yet... */
-	if (!irq_has_action(irq)) {
-	    /* If it is a local interrupt that cannot be masked... */
-	    if (vector >= 0x900)
-	    {
-	        /* Clear keyboard/mouse state */
-	    	inb(0x64);
-		inb(0x60);
-		/* Reset serial ports */
-		inb(0x3fa);
-		inb(0x2fa);
-		outb(0x0c, 0x3fc);
-		outb(0x0c, 0x2fc);
-		/* Clear NMI */
-		outb(0,0x61);
-		outb(0,0x461);
-	    }
-	}
-
-#if 0
-        /* A useful bit of code to find out if an interrupt is going wild.  */
-        {
-          static unsigned int last_msg = 0, last_cc = 0;
-          static int last_irq = -1, count = 0;
-          unsigned int cc;
-
-          __asm __volatile("rpcc %0" : "=r"(cc));
-          ++count;
-#define JENSEN_CYCLES_PER_SEC	(150000000)
-          if (cc - last_msg > ((JENSEN_CYCLES_PER_SEC) * 3) ||
-	      irq != last_irq) {
-                printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n",
-                       irq, count, cc-last_cc, get_irq_regs()->pc);
-                count = 0;
-                last_msg = cc;
-                last_irq = irq;
-          }
-          last_cc = cc;
-        }
-#endif
-
-	handle_irq(irq);
-}
-
-static void __init
-jensen_init_irq(void)
-{
-	init_i8259a_irqs();
-
-	irq_set_chip_and_handler(1, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(4, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(3, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(7, &jensen_local_irq_type, handle_level_irq);
-	irq_set_chip_and_handler(9, &jensen_local_irq_type, handle_level_irq);
-
-	common_init_isa_dma();
-}
-
-static void __init
-jensen_init_arch(void)
-{
-	struct pci_controller *hose;
-#ifdef CONFIG_PCI
-	static struct pci_dev fake_isa_bridge = { .dma_mask = 0xffffffffUL, };
-
-	isa_bridge = &fake_isa_bridge;
-#endif
-
-	/* Create a hose so that we can report i/o base addresses to
-	   userland.  */
-
-	pci_isa_hose = hose = alloc_pci_controller();
-	hose->io_space = &ioport_resource;
-	hose->mem_space = &iomem_resource;
-	hose->index = 0;
-
-	hose->sparse_mem_base = EISA_MEM - IDENT_ADDR;
-	hose->dense_mem_base = 0;
-	hose->sparse_io_base = EISA_IO - IDENT_ADDR;
-	hose->dense_io_base = 0;
-
-	hose->sg_isa = hose->sg_pci = NULL;
-	__direct_map_base = 0;
-	__direct_map_size = 0xffffffff;
-}
-
-static void
-jensen_machine_check(unsigned long vector, unsigned long la)
-{
-	printk(KERN_CRIT "Machine check\n");
-}
-
-/*
- * The System Vector
- */
-
-struct alpha_machine_vector jensen_mv __initmv = {
-	.vector_name		= "Jensen",
-	DO_EV4_MMU,
-	IO_LITE(JENSEN,jensen),
-	.machine_check		= jensen_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.rtc_port		= 0x170,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= jensen_device_interrupt,
-
-	.init_arch		= jensen_init_arch,
-	.init_irq		= jensen_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= NULL,
-	.kill_arch		= NULL,
-};
-ALIAS_MV(jensen)
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
index 8d34cf6e002a..1f99b03effc2 100644
--- a/arch/alpha/kernel/sys_marvel.c
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -18,7 +18,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_marvel.h>
 #include <asm/hwrpb.h>
 #include <asm/tlbflush.h>
@@ -397,7 +396,7 @@ marvel_init_pci(void)
 static void __init
 marvel_init_rtc(void)
 {
-	init_rtc_irq();
+	init_rtc_irq(NULL);
 }
 
 static void
@@ -462,10 +461,5 @@ struct alpha_machine_vector marvel_ev7_mv __initmv = {
 	.kill_arch		= marvel_kill_arch,
 	.pci_map_irq		= marvel_map_irq,
 	.pci_swizzle		= common_swizzle,
-
-	.pa_to_nid		= marvel_pa_to_nid,
-	.cpuid_to_nid		= marvel_cpuid_to_nid,
-	.node_mem_start		= marvel_node_mem_start,
-	.node_mem_size		= marvel_node_mem_size,
 };
 ALIAS_MV(marvel_ev7)
diff --git a/arch/alpha/kernel/sys_miata.c b/arch/alpha/kernel/sys_miata.c
index 6fa07dc5339d..33b2798de8fc 100644
--- a/arch/alpha/kernel/sys_miata.c
+++ b/arch/alpha/kernel/sys_miata.c
@@ -22,7 +22,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
@@ -81,8 +80,10 @@ miata_init_irq(void)
 	init_pyxis_irqs(0x63b0000);
 
 	common_init_isa_dma();
-	setup_irq(16+2, &halt_switch_irqaction);	/* SRM only? */
-	setup_irq(16+6, &timer_cascade_irqaction);
+	if (request_irq(16 + 2, no_action, 0, "halt-switch", NULL))
+		pr_err("Failed to register halt-switch interrupt\n");
+	if (request_irq(16 + 6, no_action, 0, "timer-cascade", NULL))
+		pr_err("Failed to register timer-cascade interrupt\n");
 }
 
 
@@ -182,16 +183,17 @@ miata_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
            the 2nd 8259 controller. So we have to check for it first. */
 
 	if((slot == 7) && (PCI_FUNC(dev->devfn) == 3)) {
-		u8 irq=0;
 		struct pci_dev *pdev = pci_get_slot(dev->bus, dev->devfn & ~7);
-		if(pdev == NULL || pci_read_config_byte(pdev, 0x40,&irq) != PCIBIOS_SUCCESSFUL) {
-			pci_dev_put(pdev);
+		u8 irq = 0;
+		int ret;
+
+		if (!pdev)
 			return -1;
-		}
-		else	{
-			pci_dev_put(pdev);
-			return irq;
-		}
+
+		ret = pci_read_config_byte(pdev, 0x40, &irq);
+		pci_dev_put(pdev);
+
+		return ret == PCIBIOS_SUCCESSFUL ? irq : -1;
 	}
 
 	return COMMON_TABLE_LOOKUP;
diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c
index 3af4f94113e1..557802398231 100644
--- a/arch/alpha/kernel/sys_mikasa.c
+++ b/arch/alpha/kernel/sys_mikasa.c
@@ -23,8 +23,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
@@ -165,64 +163,9 @@ mikasa_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 
 
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-mikasa_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
-	struct el_common *mchk_header;
-	unsigned int code;
-
-	mchk_header = (struct el_common *)la_ptr;
-
-	/* Clear the error before any reporting.  */
-	mb();
-	mb(); /* magic */
-	draina();
-	apecs_pci_clr_err();
-	wrmces(0x7);
-	mb();
-
-	code = mchk_header->code;
-	process_mcheck_info(vector, la_ptr, "MIKASA APECS",
-			    (mcheck_expected(0)
-			     && (code == MCHK_NO_DEVSEL
-			         || code == MCHK_NO_TABT)));
-}
-#endif
-
-
 /*
  * The System Vector
  */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector mikasa_mv __initmv = {
-	.vector_name		= "Mikasa",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= mikasa_apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 32,
-	.device_interrupt	= mikasa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= mikasa_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= mikasa_map_irq,
-	.pci_swizzle		= common_swizzle,
-};
-ALIAS_MV(mikasa)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
 struct alpha_machine_vector mikasa_primo_mv __initmv = {
 	.vector_name		= "Mikasa-Primo",
 	DO_EV5_MMU,
@@ -245,4 +188,3 @@ struct alpha_machine_vector mikasa_primo_mv __initmv = {
 	.pci_swizzle		= common_swizzle,
 };
 ALIAS_MV(mikasa_primo)
-#endif
diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
index cd9a112d67ff..13b79960b4b9 100644
--- a/arch/alpha/kernel/sys_nautilus.c
+++ b/arch/alpha/kernel/sys_nautilus.c
@@ -40,7 +40,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_irongate.h>
 #include <asm/hwrpb.h>
 #include <asm/tlbflush.h>
@@ -79,7 +78,7 @@ nautilus_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	return irq;
 }
 
-void
+static void
 nautilus_kill_arch(int mode)
 {
 	struct pci_bus *bus = pci_isa_hose->bus;
@@ -128,7 +127,7 @@ naut_sys_machine_check(unsigned long vector, unsigned long la_ptr,
 /* Machine checks can come from two sources - those on the CPU and those
    in the system.  They are analysed separately but all starts here.  */
 
-void
+static void
 nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 {
 	char *mchk_class;
@@ -185,12 +184,6 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 	mb();
 }
 
-extern void pcibios_claim_one_bus(struct pci_bus *);
-
-static struct resource irongate_io = {
-	.name	= "Irongate PCI IO",
-	.flags	= IORESOURCE_IO,
-};
 static struct resource irongate_mem = {
 	.name	= "Irongate PCI MEM",
 	.flags	= IORESOURCE_MEM,
@@ -202,23 +195,25 @@ static struct resource busn_resource = {
 	.flags	= IORESOURCE_BUS,
 };
 
-void __init
+static void __init
 nautilus_init_pci(void)
 {
 	struct pci_controller *hose = hose_head;
 	struct pci_host_bridge *bridge;
 	struct pci_bus *bus;
-	struct pci_dev *irongate;
 	unsigned long bus_align, bus_size, pci_mem;
 	unsigned long memtop = max_low_pfn << PAGE_SHIFT;
-	int ret;
 
 	bridge = pci_alloc_host_bridge(0);
 	if (!bridge)
 		return;
 
+	/* Use default IO. */
 	pci_add_resource(&bridge->windows, &ioport_resource);
-	pci_add_resource(&bridge->windows, &iomem_resource);
+	/* Irongate PCI memory aperture, calculate required size before
+	   setting it up. */
+	pci_add_resource(&bridge->windows, &irongate_mem);
+
 	pci_add_resource(&bridge->windows, &busn_resource);
 	bridge->dev.parent = NULL;
 	bridge->sysdata = hose;
@@ -226,59 +221,49 @@ nautilus_init_pci(void)
 	bridge->ops = alpha_mv.pci_ops;
 	bridge->swizzle_irq = alpha_mv.pci_swizzle;
 	bridge->map_irq = alpha_mv.pci_map_irq;
+	bridge->size_windows = 1;
 
 	/* Scan our single hose.  */
-	ret = pci_scan_root_bus_bridge(bridge);
-	if (ret) {
+	if (pci_scan_root_bus_bridge(bridge)) {
 		pci_free_host_bridge(bridge);
 		return;
 	}
-
 	bus = hose->bus = bridge->bus;
 	pcibios_claim_one_bus(bus);
 
-	irongate = pci_get_domain_bus_and_slot(pci_domain_nr(bus), 0, 0);
-	bus->self = irongate;
-	bus->resource[0] = &irongate_io;
-	bus->resource[1] = &irongate_mem;
-
 	pci_bus_size_bridges(bus);
 
-	/* IO port range. */
-	bus->resource[0]->start = 0;
-	bus->resource[0]->end = 0xffff;
-
-	/* Set up PCI memory range - limit is hardwired to 0xffffffff,
-	   base must be at aligned to 16Mb. */
-	bus_align = bus->resource[1]->start;
-	bus_size = bus->resource[1]->end + 1 - bus_align;
+	/* Now we've got the size and alignment of PCI memory resources
+	   stored in irongate_mem. Set up the PCI memory range: limit is
+	   hardwired to 0xffffffff, base must be aligned to 16Mb. */
+	bus_align = irongate_mem.start;
+	bus_size = irongate_mem.end + 1 - bus_align;
 	if (bus_align < 0x1000000UL)
 		bus_align = 0x1000000UL;
 
 	pci_mem = (0x100000000UL - bus_size) & -bus_align;
+	irongate_mem.start = pci_mem;
+	irongate_mem.end = 0xffffffffUL;
 
-	bus->resource[1]->start = pci_mem;
-	bus->resource[1]->end = 0xffffffffUL;
-	if (request_resource(&iomem_resource, bus->resource[1]) < 0)
+	/* Register our newly calculated PCI memory window in the resource
+	   tree. */
+	if (request_resource(&iomem_resource, &irongate_mem) < 0)
 		printk(KERN_ERR "Failed to request MEM on hose 0\n");
 
+	printk(KERN_INFO "Irongate pci_mem %pR\n", &irongate_mem);
+
 	if (pci_mem < memtop)
 		memtop = pci_mem;
 	if (memtop > alpha_mv.min_mem_address) {
 		free_reserved_area(__va(alpha_mv.min_mem_address),
 				   __va(memtop), -1, NULL);
-		printk("nautilus_init_pci: %ldk freed\n",
+		printk(KERN_INFO "nautilus_init_pci: %ldk freed\n",
 			(memtop - alpha_mv.min_mem_address) >> 10);
 	}
-
 	if ((IRONGATE0->dev_vendor >> 16) > 0x7006)	/* Albacore? */
 		IRONGATE0->pci_mem = pci_mem;
 
 	pci_bus_assign_resources(bus);
-
-	/* pci_common_swizzle() relies on bus->self being NULL
-	   for the root bus, so just clear it. */
-	bus->self = NULL;
 	pci_bus_add_devices(bus);
 }
 
diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c
index b106f327f765..eed3f16561c0 100644
--- a/arch/alpha/kernel/sys_noritake.c
+++ b/arch/alpha/kernel/sys_noritake.c
@@ -24,8 +24,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_apecs.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
@@ -254,64 +252,6 @@ noritake_swizzle(struct pci_dev *dev, u8 *pinp)
 	return slot;
 }
 
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-static void
-noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr)
-{
-#define MCHK_NO_DEVSEL 0x205U
-#define MCHK_NO_TABT 0x204U
-
-        struct el_common *mchk_header;
-        unsigned int code;
-
-        mchk_header = (struct el_common *)la_ptr;
-
-        /* Clear the error before any reporting.  */
-        mb();
-        mb(); /* magic */
-        draina();
-        apecs_pci_clr_err();
-        wrmces(0x7);
-        mb();
-
-        code = mchk_header->code;
-        process_mcheck_info(vector, la_ptr, "NORITAKE APECS",
-                            (mcheck_expected(0)
-                             && (code == MCHK_NO_DEVSEL
-                                 || code == MCHK_NO_TABT)));
-}
-#endif
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO)
-struct alpha_machine_vector noritake_mv __initmv = {
-	.vector_name		= "Noritake",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= noritake_apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 48,
-	.device_interrupt	= noritake_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= noritake_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= common_init_pci,
-	.pci_map_irq		= noritake_map_irq,
-	.pci_swizzle		= noritake_swizzle,
-};
-ALIAS_MV(noritake)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO)
 struct alpha_machine_vector noritake_primo_mv __initmv = {
 	.vector_name		= "Noritake-Primo",
 	DO_EV5_MMU,
@@ -334,4 +274,3 @@ struct alpha_machine_vector noritake_primo_mv __initmv = {
 	.pci_swizzle		= noritake_swizzle,
 };
 ALIAS_MV(noritake_primo)
-#endif
diff --git a/arch/alpha/kernel/sys_rawhide.c b/arch/alpha/kernel/sys_rawhide.c
index b76f65d0e8b5..b5846ffdadce 100644
--- a/arch/alpha/kernel/sys_rawhide.c
+++ b/arch/alpha/kernel/sys_rawhide.c
@@ -21,7 +21,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_mcpcia.h>
 #include <asm/tlbflush.h>
 
diff --git a/arch/alpha/kernel/sys_ruffian.c b/arch/alpha/kernel/sys_ruffian.c
index 07830cccabf9..4b1c8d85c4f0 100644
--- a/arch/alpha/kernel/sys_ruffian.c
+++ b/arch/alpha/kernel/sys_ruffian.c
@@ -23,7 +23,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
@@ -82,7 +81,8 @@ ruffian_init_rtc(void)
 	outb(0x31, 0x42);
 	outb(0x13, 0x42);
 
-	setup_irq(0, &timer_irqaction);
+	if (request_irq(0, rtc_timer_interrupt, 0, "timer", NULL))
+		pr_err("Failed to request irq 0 (timer)\n");
 }
 
 static void
diff --git a/arch/alpha/kernel/sys_rx164.c b/arch/alpha/kernel/sys_rx164.c
index a3db719d3c38..94046f9aea08 100644
--- a/arch/alpha/kernel/sys_rx164.c
+++ b/arch/alpha/kernel/sys_rx164.c
@@ -22,7 +22,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_polaris.h>
 #include <asm/tlbflush.h>
 
@@ -106,7 +105,8 @@ rx164_init_irq(void)
 	init_i8259a_irqs();
 	common_init_isa_dma();
 
-	setup_irq(16+20, &isa_cascade_irqaction);
+	if (request_irq(16 + 20, no_action, 0, "isa-cascade", NULL))
+		pr_err("Failed to register isa-cascade interrupt\n");
 }
 
 
diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c
index 3cf0d32da5d8..49f5c75134ec 100644
--- a/arch/alpha/kernel/sys_sable.c
+++ b/arch/alpha/kernel/sys_sable.c
@@ -21,7 +21,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_t2.h>
 #include <asm/tlbflush.h>
 
@@ -213,232 +212,6 @@ sable_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 }
 #endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE) */
 
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-
-/***********************************************************************/
-/* LYNX hardware specifics
- */
-/*
- *   For LYNX, which is also baroque, we manage 64 IRQs, via a custom IC.
- *
- * Bit      Meaning               Kernel IRQ
- *------------------------------------------
- * 0        
- * 1        
- * 2        
- * 3        mouse			12
- * 4        
- * 5        
- * 6        keyboard			1
- * 7        floppy			6
- * 8        COM2			3
- * 9        parallel port		7
- *10        EISA irq 3			-
- *11        EISA irq 4			-
- *12        EISA irq 5			5
- *13        EISA irq 6			-
- *14        EISA irq 7			-
- *15        COM1			4
- *16        EISA irq 9			9
- *17        EISA irq 10			10
- *18        EISA irq 11			11
- *19        EISA irq 12			-
- *20        
- *21        EISA irq 14			14
- *22        EISA irq 15			15
- *23        IIC				-
- *24        VGA (builtin)               -
- *25
- *26
- *27
- *28        NCR810 (builtin)		28
- *29
- *30
- *31
- *32        PCI 0 slot 4 A primary bus  32
- *33        PCI 0 slot 4 B primary bus  33
- *34        PCI 0 slot 4 C primary bus  34
- *35        PCI 0 slot 4 D primary bus
- *36        PCI 0 slot 5 A primary bus
- *37        PCI 0 slot 5 B primary bus
- *38        PCI 0 slot 5 C primary bus
- *39        PCI 0 slot 5 D primary bus
- *40        PCI 0 slot 6 A primary bus
- *41        PCI 0 slot 6 B primary bus
- *42        PCI 0 slot 6 C primary bus
- *43        PCI 0 slot 6 D primary bus
- *44        PCI 0 slot 7 A primary bus
- *45        PCI 0 slot 7 B primary bus
- *46        PCI 0 slot 7 C primary bus
- *47        PCI 0 slot 7 D primary bus
- *48        PCI 0 slot 0 A secondary bus
- *49        PCI 0 slot 0 B secondary bus
- *50        PCI 0 slot 0 C secondary bus
- *51        PCI 0 slot 0 D secondary bus
- *52        PCI 0 slot 1 A secondary bus
- *53        PCI 0 slot 1 B secondary bus
- *54        PCI 0 slot 1 C secondary bus
- *55        PCI 0 slot 1 D secondary bus
- *56        PCI 0 slot 2 A secondary bus
- *57        PCI 0 slot 2 B secondary bus
- *58        PCI 0 slot 2 C secondary bus
- *59        PCI 0 slot 2 D secondary bus
- *60        PCI 0 slot 3 A secondary bus
- *61        PCI 0 slot 3 B secondary bus
- *62        PCI 0 slot 3 C secondary bus
- *63        PCI 0 slot 3 D secondary bus
- */
-
-static void
-lynx_update_irq_hw(unsigned long bit, unsigned long mask)
-{
-	/*
-	 * Write the AIR register on the T3/T4 with the
-	 * address of the IC mask register (offset 0x40)
-	 */
-	*(vulp)T2_AIR = 0x40;
-	mb();
-	*(vulp)T2_AIR; /* re-read to force write */
-	mb();
-	*(vulp)T2_DIR = mask;    
-	mb();
-	mb();
-}
-
-static void
-lynx_ack_irq_hw(unsigned long bit)
-{
-	*(vulp)T2_VAR = (u_long) bit;
-	mb();
-	mb();
-}
-
-static irq_swizzle_t lynx_irq_swizzle = {
-	{ /* irq_to_mask */
-		-1,  6, -1,  8, 15, 12,  7,  9,	/* pseudo PIC  0-7  */
-		-1, 16, 17, 18,  3, -1, 21, 22,	/* pseudo PIC  8-15 */
-		-1, -1, -1, -1, -1, -1, -1, -1,	/* pseudo */
-		-1, -1, -1, -1, 28, -1, -1, -1,	/* pseudo */
-		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
-		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
-		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
-		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
-	},
-	{ /* mask_to_irq */
-		-1, -1, -1, 12, -1, -1,  1,  6,	/* mask 0-7   */
-		 3,  7, -1, -1,  5, -1, -1,  4,	/* mask 8-15  */
-		 9, 10, 11, -1, -1, 14, 15, -1,	/* mask 16-23 */
-		-1, -1, -1, -1, 28, -1, -1, -1,	/* mask 24-31 */
-		32, 33, 34, 35, 36, 37, 38, 39,	/* mask 32-39 */
-		40, 41, 42, 43, 44, 45, 46, 47,	/* mask 40-47 */
-		48, 49, 50, 51, 52, 53, 54, 55,	/* mask 48-55 */
-		56, 57, 58, 59, 60, 61, 62, 63	/* mask 56-63 */
-	},
-	-1,
-	lynx_update_irq_hw,
-	lynx_ack_irq_hw
-};
-
-static void __init
-lynx_init_irq(void)
-{
-	sable_lynx_irq_swizzle = &lynx_irq_swizzle;
-	sable_lynx_init_irq(64);
-}
-
-/*
- * PCI Fixup configuration for ALPHA LYNX (2100A)
- *
- * The device to slot mapping looks like:
- *
- * Slot     Device
- *  0       none
- *  1       none
- *  2       PCI-EISA bridge
- *  3       PCI-PCI bridge
- *  4       NCR 810 (Demi-Lynx only)
- *  5       none
- *  6       PCI on board slot 4
- *  7       PCI on board slot 5
- *  8       PCI on board slot 6
- *  9       PCI on board slot 7
- *
- * And behind the PPB we have:
- *
- * 11       PCI on board slot 0
- * 12       PCI on board slot 1
- * 13       PCI on board slot 2
- * 14       PCI on board slot 3
- */
-/*
- * NOTE: the IRQ assignments below are arbitrary, but need to be consistent
- * with the values in the irq swizzling tables above.
- */
-
-static int
-lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[19][5] = {
-		/*INT    INTA   INTB   INTC   INTD */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 13,  PCEB   */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 14,  PPB    */
-		{   28,    28,    28,    28,    28},  /* IdSel 15,  NCR demi */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16,  none   */
-		{   32,    32,    33,    34,    35},  /* IdSel 17,  slot 4 */
-		{   36,    36,    37,    38,    39},  /* IdSel 18,  slot 5 */
-		{   40,    40,    41,    42,    43},  /* IdSel 19,  slot 6 */
-		{   44,    44,    45,    46,    47},  /* IdSel 20,  slot 7 */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 22,  none   */
-		/* The following are actually behind the PPB. */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 16   none */
-		{   28,    28,    28,    28,    28},  /* IdSel 17   NCR lynx */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 18   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 19   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 20   none */
-		{   -1,    -1,    -1,    -1,    -1},  /* IdSel 21   none */
-		{   48,    48,    49,    50,    51},  /* IdSel 22   slot 0 */
-		{   52,    52,    53,    54,    55},  /* IdSel 23   slot 1 */
-		{   56,    56,    57,    58,    59},  /* IdSel 24   slot 2 */
-		{   60,    60,    61,    62,    63}   /* IdSel 25   slot 3 */
-	};
-	const long min_idsel = 2, max_idsel = 20, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
-}
-
-static u8
-lynx_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	int slot, pin = *pinp;
-
-	if (dev->bus->number == 0) {
-		slot = PCI_SLOT(dev->devfn);
-	}
-	/* Check for the built-in bridge */
-	else if (PCI_SLOT(dev->bus->self->devfn) == 3) {
-		slot = PCI_SLOT(dev->devfn) + 11;
-	}
-	else
-	{
-		/* Must be a card-based bridge.  */
-		do {
-			if (PCI_SLOT(dev->bus->self->devfn) == 3) {
-				slot = PCI_SLOT(dev->devfn) + 11;
-				break;
-			}
-			pin = pci_swizzle_interrupt_pin(dev, pin);
-
-			/* Move up the chain of bridges.  */
-			dev = dev->bus->self;
-			/* Slot of the next bridge.  */
-			slot = PCI_SLOT(dev->devfn);
-		} while (dev->bus->self);
-	}
-	*pinp = pin;
-	return slot;
-}
-
-#endif /* defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX) */
-
 /***********************************************************************/
 /* GENERIC irq routines */
 
@@ -540,40 +313,7 @@ sable_lynx_init_pci(void)
  * these games with GAMMA_BIAS.
  */
 
-#if defined(CONFIG_ALPHA_GENERIC) || \
-    (defined(CONFIG_ALPHA_SABLE) && !defined(CONFIG_ALPHA_GAMMA))
-#undef GAMMA_BIAS
-#define GAMMA_BIAS 0
-struct alpha_machine_vector sable_mv __initmv = {
-	.vector_name		= "Sable",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_T2_IO,
-	.machine_check		= t2_machine_check,
-	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= T2_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 40,
-	.device_interrupt	= sable_lynx_srm_device_interrupt,
-
-	.init_arch		= t2_init_arch,
-	.init_irq		= sable_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sable_lynx_init_pci,
-	.kill_arch		= t2_kill_arch,
-	.pci_map_irq		= sable_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .t2 = {
-	    .gamma_bias		= 0
-	} }
-};
-ALIAS_MV(sable)
-#endif /* GENERIC || (SABLE && !GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || \
-    (defined(CONFIG_ALPHA_SABLE) && defined(CONFIG_ALPHA_GAMMA))
+#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SABLE)
 #undef GAMMA_BIAS
 #define GAMMA_BIAS _GAMMA_BIAS
 struct alpha_machine_vector sable_gamma_mv __initmv = {
@@ -602,35 +342,4 @@ struct alpha_machine_vector sable_gamma_mv __initmv = {
 	} }
 };
 ALIAS_MV(sable_gamma)
-#endif /* GENERIC || (SABLE && GAMMA) */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LYNX)
-#undef GAMMA_BIAS
-#define GAMMA_BIAS _GAMMA_BIAS
-struct alpha_machine_vector lynx_mv __initmv = {
-	.vector_name		= "Lynx",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_T2_IO,
-	.machine_check		= t2_machine_check,
-	.max_isa_dma_address	= ALPHA_SABLE_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= EISA_DEFAULT_IO_BASE,
-	.min_mem_address	= T2_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 64,
-	.device_interrupt	= sable_lynx_srm_device_interrupt,
-
-	.init_arch		= t2_init_arch,
-	.init_irq		= lynx_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= sable_lynx_init_pci,
-	.kill_arch		= t2_kill_arch,
-	.pci_map_irq		= lynx_map_irq,
-	.pci_swizzle		= lynx_swizzle,
-
-	.sys = { .t2 = {
-	    .gamma_bias		= _GAMMA_BIAS
-	} }
-};
-ALIAS_MV(lynx)
-#endif /* GENERIC || LYNX */
+#endif /* GENERIC || SABLE */
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c
deleted file mode 100644
index a6bdc1da47ad..000000000000
--- a/arch/alpha/kernel/sys_sio.c
+++ /dev/null
@@ -1,485 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *	linux/arch/alpha/kernel/sys_sio.c
- *
- *	Copyright (C) 1995 David A Rusling
- *	Copyright (C) 1996 Jay A Estabrook
- *	Copyright (C) 1998, 1999 Richard Henderson
- *
- * Code for all boards that route the PCI interrupts through the SIO
- * PCI/ISA bridge.  This includes Noname (AXPpci33), Multia (UDB),
- * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/screen_info.h>
-
-#include <asm/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/core_apecs.h>
-#include <asm/core_lca.h>
-#include <asm/tlbflush.h>
-
-#include "proto.h"
-#include "irq_impl.h"
-#include "pci_impl.h"
-#include "machvec_impl.h"
-#include "pc873xx.h"
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-/* Save LCA configuration data as the console had it set up.  */
-struct 
-{
-	unsigned int orig_route_tab; /* for SAVE/RESTORE */
-} saved_config __attribute((common));
-#endif
-
-
-static void __init
-sio_init_irq(void)
-{
-	if (alpha_using_srm)
-		alpha_mv.device_interrupt = srm_device_interrupt;
-
-	init_i8259a_irqs();
-	common_init_isa_dma();
-}
-
-static inline void __init
-alphabook1_init_arch(void)
-{
-	/* The AlphaBook1 has LCD video fixed at 800x600,
-	   37 rows and 100 cols. */
-	screen_info.orig_y = 37;
-	screen_info.orig_video_cols = 100;
-	screen_info.orig_video_lines = 37;
-
-	lca_init_arch();
-}
-
-
-/*
- * sio_route_tab selects irq routing in PCI/ISA bridge so that:
- *		PIRQ0 -> irq 15
- *		PIRQ1 -> irq  9
- *		PIRQ2 -> irq 10
- *		PIRQ3 -> irq 11
- *
- * This probably ought to be configurable via MILO.  For
- * example, sound boards seem to like using IRQ 9.
- *
- * This is NOT how we should do it. PIRQ0-X should have
- * their own IRQs, the way intel uses the IO-APIC IRQs.
- */
-
-static void __init
-sio_pci_route(void)
-{
-	unsigned int orig_route_tab;
-
-	/* First, ALWAYS read and print the original setting. */
-	pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				  &orig_route_tab);
-	printk("%s: PIRQ original 0x%x new 0x%x\n", __func__,
-	       orig_route_tab, alpha_mv.sys.sio.route_tab);
-
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-	saved_config.orig_route_tab = orig_route_tab;
-#endif
-
-	/* Now override with desired setting. */
-	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				   alpha_mv.sys.sio.route_tab);
-}
-
-static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev)
-{
-	if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) &&
-	    (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA))
-		return false;
-
-	return true;
-}
-
-static unsigned int __init
-sio_collect_irq_levels(void)
-{
-	unsigned int level_bits = 0;
-	struct pci_dev *dev = NULL;
-
-	/* Iterate through the devices, collecting IRQ levels.  */
-	for_each_pci_dev(dev) {
-		if (!sio_pci_dev_irq_needs_level(dev))
-			continue;
-
-		if (dev->irq)
-			level_bits |= (1 << dev->irq);
-	}
-	return level_bits;
-}
-
-static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset)
-{
-	unsigned int old_level_bits;
-
-	/*
-	 * Now, make all PCI interrupts level sensitive.  Notice:
-	 * these registers must be accessed byte-wise.  inw()/outw()
-	 * don't work.
-	 *
-	 * Make sure to turn off any level bits set for IRQs 9,10,11,15,
-	 *  so that the only bits getting set are for devices actually found.
-	 * Note that we do preserve the remainder of the bits, which we hope
-	 *  will be set correctly by ARC/SRM.
-	 *
-	 * Note: we at least preserve any level-set bits on AlphaBook1
-	 */
-	old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8);
-
-	if (reset)
-		old_level_bits &= 0x71ff;
-
-	level_bits |= old_level_bits;
-
-	outb((level_bits >> 0) & 0xff, 0x4d0);
-	outb((level_bits >> 8) & 0xff, 0x4d1);
-}
-
-static inline void
-sio_fixup_irq_levels(unsigned int level_bits)
-{
-	__sio_fixup_irq_levels(level_bits, true);
-}
-
-static inline int
-noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	/*
-	 * The Noname board has 5 PCI slots with each of the 4
-	 * interrupt pins routed to different pins on the PCI/ISA
-	 * bridge (PIRQ0-PIRQ3).  The table below is based on
-	 * information available at:
-	 *
-	 *   http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt
-	 *
-	 * I have no information on the Avanti interrupt routing, but
-	 * the routing seems to be identical to the Noname except
-	 * that the Avanti has an additional slot whose routing I'm
-	 * unsure of.
-	 *
-	 * pirq_tab[0] is a fake entry to deal with old PCI boards
-	 * that have the interrupt pin number hardwired to 0 (meaning
-	 * that they use the default INTA line, if they are interrupt
-	 * driven at all).
-	 */
-	static char irq_tab[][5] = {
-		/*INT A   B   C   D */
-		{ 3,  3,  3,  3,  3}, /* idsel  6 (53c810) */ 
-		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
-		{ 2,  2, -1, -1, -1}, /* idsel  8 (Hack: slot closest ISA) */
-		{-1, -1, -1, -1, -1}, /* idsel  9 (unused) */
-		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
-		{ 0,  0,  2,  1,  0}, /* idsel 11 KN25_PCI_SLOT0 */
-		{ 1,  1,  0,  2,  1}, /* idsel 12 KN25_PCI_SLOT1 */
-		{ 2,  2,  1,  0,  2}, /* idsel 13 KN25_PCI_SLOT2 */
-		{ 0,  0,  0,  0,  0}, /* idsel 14 AS255 TULIP */
-	};
-	const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5;
-	int irq = COMMON_TABLE_LOOKUP, tmp;
-	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-
-	irq = irq >= 0 ? tmp : -1;
-
-	/* Fixup IRQ level if an actual IRQ mapping is detected */
-	if (sio_pci_dev_irq_needs_level(dev) && irq >= 0)
-		__sio_fixup_irq_levels(1 << irq, false);
-
-	return irq;
-}
-
-static inline int
-p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	static char irq_tab[][5] = {
-		/*INT A   B   C   D */
-		{ 0,  0, -1, -1, -1}, /* idsel  6 (53c810) */
-		{-1, -1, -1, -1, -1}, /* idsel  7 (SIO: PCI/ISA bridge) */
-		{ 1,  1,  2,  3,  0}, /* idsel  8 (slot A) */
-		{ 2,  2,  3,  0,  1}, /* idsel  9 (slot B) */
-		{-1, -1, -1, -1, -1}, /* idsel 10 (unused) */
-		{-1, -1, -1, -1, -1}, /* idsel 11 (unused) */
-		{ 3,  3, -1, -1, -1}, /* idsel 12 (CMD0646) */
-	};
-	const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5;
-	int irq = COMMON_TABLE_LOOKUP, tmp;
-	tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq);
-	return irq >= 0 ? tmp : -1;
-}
-
-static inline void __init
-noname_init_pci(void)
-{
-	common_init_pci();
-	sio_pci_route();
-	sio_fixup_irq_levels(sio_collect_irq_levels());
-
-	if (pc873xx_probe() == -1) {
-		printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
-	} else {
-		printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
-			pc873xx_get_model(), pc873xx_get_base());
-
-		/* Enabling things in the Super IO chip doesn't actually
-		 * configure and enable things, the legacy drivers still
-		 * need to do the actual configuration and enabling.
-		 * This only unblocks them.
-		 */
-
-#if !defined(CONFIG_ALPHA_AVANTI)
-		/* Don't bother on the Avanti family.
-		 * None of them had on-board IDE.
-		 */
-		pc873xx_enable_ide();
-#endif
-		pc873xx_enable_epp19();
-	}
-}
-
-static inline void __init
-alphabook1_init_pci(void)
-{
-	struct pci_dev *dev;
-	unsigned char orig, config;
-
-	common_init_pci();
-	sio_pci_route();
-
-	/*
-	 * On the AlphaBook1, the PCMCIA chip (Cirrus 6729)
-	 * is sensitive to PCI bus bursts, so we must DISABLE
-	 * burst mode for the NCR 8xx SCSI... :-(
-	 *
-	 * Note that the NCR810 SCSI driver must preserve the
-	 * setting of the bit in order for this to work.  At the
-	 * moment (2.0.29), ncr53c8xx.c does NOT do this, but
-	 * 53c7,8xx.c DOES.
-	 */
-
-	dev = NULL;
-	while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) {
-		if (dev->device == PCI_DEVICE_ID_NCR_53C810
-		    || dev->device == PCI_DEVICE_ID_NCR_53C815
-		    || dev->device == PCI_DEVICE_ID_NCR_53C820
-		    || dev->device == PCI_DEVICE_ID_NCR_53C825) {
-			unsigned long io_port;
-			unsigned char ctest4;
-
-			io_port = dev->resource[0].start;
-			ctest4 = inb(io_port+0x21);
-			if (!(ctest4 & 0x80)) {
-				printk("AlphaBook1 NCR init: setting"
-				       " burst disable\n");
-				outb(ctest4 | 0x80, io_port+0x21);
-			}
-                }
-	}
-
-	/* Do not set *ANY* level triggers for AlphaBook1. */
-	sio_fixup_irq_levels(0);
-
-	/* Make sure that register PR1 indicates 1Mb mem */
-	outb(0x0f, 0x3ce); orig = inb(0x3cf);   /* read PR5  */
-	outb(0x0f, 0x3ce); outb(0x05, 0x3cf);   /* unlock PR0-4 */
-	outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */
-	if ((config & 0xc0) != 0xc0) {
-		printk("AlphaBook1 VGA init: setting 1Mb memory\n");
-		config |= 0xc0;
-		outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */
-	}
-	outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */
-}
-
-void
-sio_kill_arch(int mode)
-{
-#if defined(ALPHA_RESTORE_SRM_SETUP)
-	/* Since we cannot read the PCI DMA Window CSRs, we
-	 * cannot restore them here.
-	 *
-	 * However, we CAN read the PIRQ route register, so restore it
-	 * now...
-	 */
- 	pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60,
-				   saved_config.orig_route_tab);
-#endif
-}
-
-
-/*
- * The System Vectors
- */
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1)
-struct alpha_machine_vector alphabook1_mv __initmv = {
-	.vector_name		= "AlphaBook1",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= alphabook1_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= alphabook1_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		/* NCR810 SCSI is 14, PCMCIA controller is 15.  */
-		.route_tab	= 0x0e0f0a0a,
-	}}
-};
-ALIAS_MV(alphabook1)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI)
-struct alpha_machine_vector avanti_mv __initmv = {
-	.vector_name		= "Avanti",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a050f, /* leave 14 for IDE, 9 for SND */
-	}}
-};
-ALIAS_MV(avanti)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME)
-struct alpha_machine_vector noname_mv __initmv = {
-	.vector_name		= "Noname",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= srm_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		/* For UDB, the only available PCI slot must not map to IRQ 9,
-		   since that's the builtin MSS sound chip. That PCI slot
-		   will map to PIRQ1 (for INTA at least), so we give it IRQ 15
-		   instead.
-
-		   Unfortunately we have to do this for NONAME as well, since
-		   they are co-indicated when the platform type "Noname" is
-		   selected... :-(  */
-
-		.route_tab	= 0x0b0a0f0d,
-	}}
-};
-ALIAS_MV(noname)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K)
-struct alpha_machine_vector p2k_mv __initmv = {
-	.vector_name		= "Platform2000",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_LCA_IO,
-	.machine_check		= lca_machine_check,
-	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= APECS_AND_LCA_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= srm_device_interrupt,
-
-	.init_arch		= lca_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= p2k_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a090f,
-	}}
-};
-ALIAS_MV(p2k)
-#endif
-
-#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL)
-struct alpha_machine_vector xl_mv __initmv = {
-	.vector_name		= "XL",
-	DO_EV4_MMU,
-	DO_DEFAULT_RTC,
-	DO_APECS_IO,
-	.machine_check		= apecs_machine_check,
-	.max_isa_dma_address	= ALPHA_XL_MAX_ISA_DMA_ADDRESS,
-	.min_io_address		= DEFAULT_IO_BASE,
-	.min_mem_address	= XL_DEFAULT_MEM_BASE,
-
-	.nr_irqs		= 16,
-	.device_interrupt	= isa_device_interrupt,
-
-	.init_arch		= apecs_init_arch,
-	.init_irq		= sio_init_irq,
-	.init_rtc		= common_init_rtc,
-	.init_pci		= noname_init_pci,
-	.kill_arch		= sio_kill_arch,
-	.pci_map_irq		= noname_map_irq,
-	.pci_swizzle		= common_swizzle,
-
-	.sys = { .sio = {
-		.route_tab	= 0x0b0a090f,
-	}}
-};
-ALIAS_MV(xl)
-#endif
diff --git a/arch/alpha/kernel/sys_sx164.c b/arch/alpha/kernel/sys_sx164.c
index 1ec638a2746a..dd9de84b630c 100644
--- a/arch/alpha/kernel/sys_sx164.c
+++ b/arch/alpha/kernel/sys_sx164.c
@@ -22,7 +22,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_cia.h>
 #include <asm/hwrpb.h>
 #include <asm/tlbflush.h>
@@ -54,7 +53,8 @@ sx164_init_irq(void)
 	else
 		init_pyxis_irqs(0xff00003f0000UL);
 
-	setup_irq(16+6, &timer_cascade_irqaction);
+	if (request_irq(16 + 6, no_action, 0, "timer-cascade", NULL))
+		pr_err("Failed to register timer-cascade interrupt\n");
 }
 
 /*
diff --git a/arch/alpha/kernel/sys_takara.c b/arch/alpha/kernel/sys_takara.c
index e230c6864088..9e2adb69bc74 100644
--- a/arch/alpha/kernel/sys_takara.c
+++ b/arch/alpha/kernel/sys_takara.c
@@ -21,7 +21,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_cia.h>
 #include <asm/tlbflush.h>
 
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index c8390d8de140..b1f3b4fcf99b 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -26,7 +26,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_titan.h>
 #include <asm/hwrpb.h>
 #include <asm/tlbflush.h>
diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c
index 8e64052811ab..3cee05443f07 100644
--- a/arch/alpha/kernel/sys_wildfire.c
+++ b/arch/alpha/kernel/sys_wildfire.c
@@ -20,7 +20,6 @@
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/pgtable.h>
 #include <asm/core_wildfire.h>
 #include <asm/hwrpb.h>
 #include <asm/tlbflush.h>
@@ -156,10 +155,6 @@ static void __init
 wildfire_init_irq_per_pca(int qbbno, int pcano)
 {
 	int i, irq_bias;
-	static struct irqaction isa_enable = {
-		.handler	= no_action,
-		.name		= "isa_enable",
-	};
 
 	irq_bias = qbbno * (WILDFIRE_PCA_PER_QBB * WILDFIRE_IRQ_PER_PCA)
 		 + pcano * WILDFIRE_IRQ_PER_PCA;
@@ -198,7 +193,8 @@ wildfire_init_irq_per_pca(int qbbno, int pcano)
 		irq_set_status_flags(i + irq_bias, IRQ_LEVEL);
 	}
 
-	setup_irq(32+irq_bias, &isa_enable);
+	if (request_irq(32 + irq_bias, no_action, 0, "isa_enable", NULL))
+		pr_err("Failed to register isa_enable interrupt\n");
 }
 
 static void __init
@@ -341,10 +337,5 @@ struct alpha_machine_vector wildfire_mv __initmv = {
 	.kill_arch		= wildfire_kill_arch,
 	.pci_map_irq		= wildfire_map_irq,
 	.pci_swizzle		= common_swizzle,
-
-	.pa_to_nid		= wildfire_pa_to_nid,
-	.cpuid_to_nid		= wildfire_cpuid_to_nid,
-	.node_mem_start		= wildfire_node_mem_start,
-	.node_mem_size		= wildfire_node_mem_size,
 };
 ALIAS_MV(wildfire)
diff --git a/arch/alpha/kernel/syscalls/Makefile b/arch/alpha/kernel/syscalls/Makefile
index 659faefdcb1d..b265e4bc16c2 100644
--- a/arch/alpha/kernel/syscalls/Makefile
+++ b/arch/alpha/kernel/syscalls/Makefile
@@ -2,37 +2,31 @@
 kapi := arch/$(SRCARCH)/include/generated/asm
 uapi := arch/$(SRCARCH)/include/generated/uapi/asm
 
-_dummy := $(shell [ -d '$(uapi)' ] || mkdir -p '$(uapi)')	\
-	  $(shell [ -d '$(kapi)' ] || mkdir -p '$(kapi)')
+$(shell mkdir -p $(uapi) $(kapi))
 
-syscall := $(srctree)/$(src)/syscall.tbl
-syshdr := $(srctree)/$(src)/syscallhdr.sh
-systbl := $(srctree)/$(src)/syscalltbl.sh
+syscall := $(src)/syscall.tbl
+syshdr := $(srctree)/scripts/syscallhdr.sh
+systbl := $(srctree)/scripts/syscalltbl.sh
 
 quiet_cmd_syshdr = SYSHDR  $@
-      cmd_syshdr = $(CONFIG_SHELL) '$(syshdr)' '$<' '$@'	\
-		   '$(syshdr_abis_$(basetarget))'		\
-		   '$(syshdr_pfx_$(basetarget))'		\
-		   '$(syshdr_offset_$(basetarget))'
+      cmd_syshdr = $(CONFIG_SHELL) $(syshdr) --emit-nr $< $@
 
 quiet_cmd_systbl = SYSTBL  $@
-      cmd_systbl = $(CONFIG_SHELL) '$(systbl)' '$<' '$@'	\
-		   '$(systbl_abis_$(basetarget))'		\
-		   '$(systbl_abi_$(basetarget))'		\
-		   '$(systbl_offset_$(basetarget))'
+      cmd_systbl = $(CONFIG_SHELL) $(systbl) $< $@
 
-$(uapi)/unistd_32.h: $(syscall) $(syshdr)
+$(uapi)/unistd_32.h: $(syscall) $(syshdr) FORCE
 	$(call if_changed,syshdr)
 
-$(kapi)/syscall_table.h: $(syscall) $(systbl)
+$(kapi)/syscall_table.h: $(syscall) $(systbl) FORCE
 	$(call if_changed,systbl)
 
 uapisyshdr-y		+= unistd_32.h
 kapisyshdr-y		+= syscall_table.h
 
-targets	+= $(uapisyshdr-y) $(kapisyshdr-y)
+uapisyshdr-y	:= $(addprefix $(uapi)/, $(uapisyshdr-y))
+kapisyshdr-y	:= $(addprefix $(kapi)/, $(kapisyshdr-y))
+targets		+= $(addprefix ../../../../, $(uapisyshdr-y) $(kapisyshdr-y))
 
 PHONY += all
-all: $(addprefix $(uapi)/,$(uapisyshdr-y))
-all: $(addprefix $(kapi)/,$(kapisyshdr-y))
+all: $(uapisyshdr-y) $(kapisyshdr-y)
 	@:
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index 728fe028c02c..16dca28ebf17 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -89,10 +89,10 @@
 80	common	setgroups			sys_setgroups
 81	common	osf_old_getpgrp			sys_ni_syscall
 82	common	setpgrp				sys_setpgid
-83	common	osf_setitimer			sys_osf_setitimer
+83	common	osf_setitimer			compat_sys_setitimer
 84	common	osf_old_wait			sys_ni_syscall
 85	common	osf_table			sys_ni_syscall
-86	common	osf_getitimer			sys_osf_getitimer
+86	common	osf_getitimer			compat_sys_getitimer
 87	common	gethostname			sys_gethostname
 88	common	sethostname			sys_sethostname
 89	common	getdtablesize			sys_getdtablesize
@@ -125,8 +125,8 @@
 116	common	osf_gettimeofday		sys_osf_gettimeofday
 117	common	osf_getrusage			sys_osf_getrusage
 118	common	getsockopt			sys_getsockopt
-120	common	readv				sys_osf_readv
-121	common	writev				sys_osf_writev
+120	common	readv				sys_readv
+121	common	writev				sys_writev
 122	common	osf_settimeofday		sys_osf_settimeofday
 123	common	fchown				sys_fchown
 124	common	fchmod				sys_fchmod
@@ -230,7 +230,7 @@
 259	common	osf_swapctl			sys_ni_syscall
 260	common	osf_memcntl			sys_ni_syscall
 261	common	osf_fdatasync			sys_ni_syscall
-300	common	bdflush				sys_bdflush
+300	common	bdflush				sys_ni_syscall
 301	common	sethae				sys_sethae
 302	common	mount				sys_mount
 303	common	old_adjtimex			sys_old_adjtimex
@@ -249,7 +249,7 @@
 316	common	mlockall			sys_mlockall
 317	common	munlockall			sys_munlockall
 318	common	sysinfo				sys_sysinfo
-319	common	_sysctl				sys_sysctl
+319	common	_sysctl				sys_ni_syscall
 # 320 was sys_idle
 321	common	oldumount			sys_oldumount
 322	common	swapon				sys_swapon
@@ -334,7 +334,7 @@
 401	common	io_submit			sys_io_submit
 402	common	io_cancel			sys_io_cancel
 405	common	exit_group			sys_exit_group
-406	common	lookup_dcookie			sys_lookup_dcookie
+406	common	lookup_dcookie			sys_ni_syscall
 407	common	epoll_create			sys_epoll_create
 408	common	epoll_ctl			sys_epoll_ctl
 409	common	epoll_wait			sys_epoll_wait
@@ -474,4 +474,38 @@
 542	common	fsmount				sys_fsmount
 543	common	fspick				sys_fspick
 544	common	pidfd_open			sys_pidfd_open
-# 545 reserved for clone3
+545	common	clone3				alpha_clone3
+546	common	close_range			sys_close_range
+547	common	openat2				sys_openat2
+548	common	pidfd_getfd			sys_pidfd_getfd
+549	common	faccessat2			sys_faccessat2
+550	common	process_madvise			sys_process_madvise
+551	common	epoll_pwait2			sys_epoll_pwait2
+552	common	mount_setattr			sys_mount_setattr
+553	common	quotactl_fd			sys_quotactl_fd
+554	common	landlock_create_ruleset		sys_landlock_create_ruleset
+555	common	landlock_add_rule		sys_landlock_add_rule
+556	common	landlock_restrict_self		sys_landlock_restrict_self
+# 557 reserved for memfd_secret
+558	common	process_mrelease		sys_process_mrelease
+559	common  futex_waitv                     sys_futex_waitv
+560	common	set_mempolicy_home_node		sys_ni_syscall
+561	common	cachestat			sys_cachestat
+562	common	fchmodat2			sys_fchmodat2
+563	common	map_shadow_stack		sys_map_shadow_stack
+564	common	futex_wake			sys_futex_wake
+565	common	futex_wait			sys_futex_wait
+566	common	futex_requeue			sys_futex_requeue
+567	common	statmount			sys_statmount
+568	common	listmount			sys_listmount
+569	common	lsm_get_self_attr		sys_lsm_get_self_attr
+570	common	lsm_set_self_attr		sys_lsm_set_self_attr
+571	common	lsm_list_modules		sys_lsm_list_modules
+572	common  mseal				sys_mseal
+573	common	setxattrat			sys_setxattrat
+574	common	getxattrat			sys_getxattrat
+575	common	listxattrat			sys_listxattrat
+576	common	removexattrat			sys_removexattrat
+577	common	open_tree_attr			sys_open_tree_attr
+578	common	file_getattr			sys_file_getattr
+579	common	file_setattr			sys_file_setattr
diff --git a/arch/alpha/kernel/syscalls/syscallhdr.sh b/arch/alpha/kernel/syscalls/syscallhdr.sh
deleted file mode 100644
index e5b99bd2e5e7..000000000000
--- a/arch/alpha/kernel/syscalls/syscallhdr.sh
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-prefix="$4"
-offset="$5"
-
-fileguard=_UAPI_ASM_ALPHA_`basename "$out" | sed \
-	-e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \
-	-e 's/[^A-Z0-9_]/_/g' -e 's/__/_/g'`
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
-	printf "#ifndef %s\n" "${fileguard}"
-	printf "#define %s\n" "${fileguard}"
-	printf "\n"
-
-	nxt=0
-	while read nr abi name entry ; do
-		if [ -z "$offset" ]; then
-			printf "#define __NR_%s%s\t%s\n" \
-				"${prefix}" "${name}" "${nr}"
-		else
-			printf "#define __NR_%s%s\t(%s + %s)\n" \
-				"${prefix}" "${name}" "${offset}" "${nr}"
-		fi
-		nxt=$((nr+1))
-	done
-
-	printf "\n"
-	printf "#ifdef __KERNEL__\n"
-	printf "#define __NR_syscalls\t%s\n" "${nxt}"
-	printf "#endif\n"
-	printf "\n"
-	printf "#endif /* %s */" "${fileguard}"
-) > "$out"
diff --git a/arch/alpha/kernel/syscalls/syscalltbl.sh b/arch/alpha/kernel/syscalls/syscalltbl.sh
deleted file mode 100644
index 85d78d9309ad..000000000000
--- a/arch/alpha/kernel/syscalls/syscalltbl.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0
-
-in="$1"
-out="$2"
-my_abis=`echo "($3)" | tr ',' '|'`
-my_abi="$4"
-offset="$5"
-
-emit() {
-	t_nxt="$1"
-	t_nr="$2"
-	t_entry="$3"
-
-	while [ $t_nxt -lt $t_nr ]; do
-		printf "__SYSCALL(%s, sys_ni_syscall, )\n" "${t_nxt}"
-		t_nxt=$((t_nxt+1))
-	done
-	printf "__SYSCALL(%s, %s, )\n" "${t_nxt}" "${t_entry}"
-}
-
-grep -E "^[0-9A-Fa-fXx]+[[:space:]]+${my_abis}" "$in" | sort -n | (
-	nxt=0
-	if [ -z "$offset" ]; then
-		offset=0
-	fi
-
-	while read nr abi name entry ; do
-		emit $((nxt+offset)) $((nr+offset)) $entry
-		nxt=$((nr+1))
-	done
-) > "$out"
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index 9704f22ed5e3..68f3e4f329eb 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -7,10 +7,9 @@
 
 #include <asm/unistd.h>
 
-#define __SYSCALL(nr, entry, nargs) .quad entry
+#define __SYSCALL(nr, entry) .quad entry
 	.data
 	.align 3
 	.globl sys_call_table
 sys_call_table:
 #include <asm/syscall_table.h>
-#undef __SYSCALL
diff --git a/arch/alpha/kernel/termios.c b/arch/alpha/kernel/termios.c
new file mode 100644
index 000000000000..a4c29a22edf7
--- /dev/null
+++ b/arch/alpha/kernel/termios.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/termios_internal.h>
+
+int user_termio_to_kernel_termios(struct ktermios *termios,
+						struct termio __user *termio)
+{
+	struct termio v;
+	bool canon;
+
+	if (copy_from_user(&v, termio, sizeof(struct termio)))
+		return -EFAULT;
+
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | v.c_iflag;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | v.c_oflag;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | v.c_cflag;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | v.c_lflag;
+	termios->c_line = (0xffff0000 & termios->c_lflag) | v.c_line;
+
+	canon = v.c_lflag & ICANON;
+	termios->c_cc[VINTR]  = v.c_cc[_VINTR];
+	termios->c_cc[VQUIT]  = v.c_cc[_VQUIT];
+	termios->c_cc[VERASE] = v.c_cc[_VERASE];
+	termios->c_cc[VKILL]  = v.c_cc[_VKILL];
+	termios->c_cc[VEOL2]  = v.c_cc[_VEOL2];
+	termios->c_cc[VSWTC]  = v.c_cc[_VSWTC];
+	termios->c_cc[canon ? VEOF : VMIN]  = v.c_cc[_VEOF];
+	termios->c_cc[canon ? VEOL : VTIME] = v.c_cc[_VEOL];
+
+	return 0;
+}
+
+int kernel_termios_to_user_termio(struct termio __user *termio,
+						struct ktermios *termios)
+{
+	struct termio v;
+	bool canon;
+
+	memset(&v, 0, sizeof(struct termio));
+	v.c_iflag = termios->c_iflag;
+	v.c_oflag = termios->c_oflag;
+	v.c_cflag = termios->c_cflag;
+	v.c_lflag = termios->c_lflag;
+	v.c_line = termios->c_line;
+
+	canon = v.c_lflag & ICANON;
+	v.c_cc[_VINTR]  = termios->c_cc[VINTR];
+	v.c_cc[_VQUIT]  = termios->c_cc[VQUIT];
+	v.c_cc[_VERASE] = termios->c_cc[VERASE];
+	v.c_cc[_VKILL]  = termios->c_cc[VKILL];
+	v.c_cc[_VEOF]   = termios->c_cc[canon ? VEOF : VMIN];
+	v.c_cc[_VEOL]   = termios->c_cc[canon ? VEOL : VTIME];
+	v.c_cc[_VEOL2]  = termios->c_cc[VEOL2];
+	v.c_cc[_VSWTC]  = termios->c_cc[VSWTC];
+
+	return copy_to_user(termio, &v, sizeof(struct termio));
+}
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index 0069360697ee..4d01c392ab14 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -242,7 +242,7 @@ common_init_rtc(void)
 	outb(0x31, 0x42);
 	outb(0x13, 0x42);
 
-	init_rtc_irq();
+	init_rtc_irq(NULL);
 }
 
 
@@ -396,9 +396,7 @@ time_init(void)
 	if (alpha_using_qemu) {
 		clocksource_register_hz(&qemu_cs, NSEC_PER_SEC);
 		init_qemu_clockevent();
-
-		timer_irqaction.handler = qemu_timer_interrupt;
-		init_rtc_irq();
+		init_rtc_irq(qemu_timer_interrupt);
 		return;
 	}
 
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index f6b9664ac504..7004397937cf 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -9,6 +9,7 @@
  * This file initializes the trap entry points
  */
 
+#include <linux/cpu.h>
 #include <linux/jiffies.h>
 #include <linux/mm.h>
 #include <linux/sched/signal.h>
@@ -21,7 +22,7 @@
 
 #include <asm/gentrap.h>
 #include <linux/uaccess.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 #include <asm/sysinfo.h>
 #include <asm/hwrpb.h>
 #include <asm/mmu_context.h>
@@ -29,39 +30,6 @@
 
 #include "proto.h"
 
-/* Work-around for some SRMs which mishandle opDEC faults.  */
-
-static int opDEC_fix;
-
-static void
-opDEC_check(void)
-{
-	__asm__ __volatile__ (
-	/* Load the address of... */
-	"	br	$16, 1f\n"
-	/* A stub instruction fault handler.  Just add 4 to the
-	   pc and continue.  */
-	"	ldq	$16, 8($sp)\n"
-	"	addq	$16, 4, $16\n"
-	"	stq	$16, 8($sp)\n"
-	"	call_pal %[rti]\n"
-	/* Install the instruction fault handler.  */
-	"1:	lda	$17, 3\n"
-	"	call_pal %[wrent]\n"
-	/* With that in place, the fault from the round-to-minf fp
-	   insn will arrive either at the "lda 4" insn (bad) or one
-	   past that (good).  This places the correct fixup in %0.  */
-	"	lda %[fix], 0\n"
-	"	cvttq/svm $f31,$f31\n"
-	"	lda %[fix], 4"
-	: [fix] "=r" (opDEC_fix)
-	: [rti] "n" (PAL_rti), [wrent] "n" (PAL_wrent)
-	: "$0", "$1", "$16", "$17", "$22", "$23", "$24", "$25");
-
-	if (opDEC_fix)
-		printk("opDEC fixup enabled.\n");
-}
-
 void
 dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
 {
@@ -121,36 +89,34 @@ dik_show_code(unsigned int *pc)
 }
 
 static void
-dik_show_trace(unsigned long *sp)
+dik_show_trace(unsigned long *sp, const char *loglvl)
 {
 	long i = 0;
-	printk("Trace:\n");
+	printk("%sTrace:\n", loglvl);
 	while (0x1ff8 & (unsigned long) sp) {
 		extern char _stext[], _etext[];
 		unsigned long tmp = *sp;
 		sp++;
-		if (tmp < (unsigned long) &_stext)
+		if (!is_kernel_text(tmp))
 			continue;
-		if (tmp >= (unsigned long) &_etext)
-			continue;
-		printk("[<%lx>] %pSR\n", tmp, (void *)tmp);
+		printk("%s[<%lx>] %pSR\n", loglvl, tmp, (void *)tmp);
 		if (i > 40) {
-			printk(" ...");
+			printk("%s ...", loglvl);
 			break;
 		}
 	}
-	printk("\n");
+	printk("%s\n", loglvl);
 }
 
 static int kstack_depth_to_print = 24;
 
-void show_stack(struct task_struct *task, unsigned long *sp)
+void show_stack(struct task_struct *task, unsigned long *sp, const char *loglvl)
 {
 	unsigned long *stack;
 	int i;
 
 	/*
-	 * debugging aid: "show_stack(NULL);" prints the
+	 * debugging aid: "show_stack(NULL, NULL, KERN_EMERG);" prints the
 	 * back trace for this cpu.
 	 */
 	if(sp==NULL)
@@ -163,14 +129,14 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 		if ((i % 4) == 0) {
 			if (i)
 				pr_cont("\n");
-			printk("       ");
+			printk("%s       ", loglvl);
 		} else {
 			pr_cont(" ");
 		}
 		pr_cont("%016lx", *stack++);
 	}
 	pr_cont("\n");
-	dik_show_trace(sp);
+	dik_show_trace(sp, loglvl);
 }
 
 void
@@ -184,7 +150,7 @@ die_if_kernel(char * str, struct pt_regs *regs, long err, unsigned long *r9_15)
 	printk("%s(%d): %s %ld\n", current->comm, task_pid_nr(current), str, err);
 	dik_show_regs(regs, r9_15);
 	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
-	dik_show_trace((unsigned long *)(regs+1));
+	dik_show_trace((unsigned long *)(regs+1), KERN_DEFAULT);
 	dik_show_code((unsigned int *)regs->pc);
 
 	if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) {
@@ -192,7 +158,7 @@ die_if_kernel(char * str, struct pt_regs *regs, long err, unsigned long *r9_15)
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 #ifndef CONFIG_MATHEMU
@@ -227,7 +193,7 @@ do_entArith(unsigned long summary, unsigned long write_mask,
 	}
 	die_if_kernel("Arithmetic fault", regs, 0, NULL);
 
-	send_sig_fault(SIGFPE, si_code, (void __user *) regs->pc, 0, current);
+	send_sig_fault_trapno(SIGFPE, si_code, (void __user *) regs->pc, 0, current);
 }
 
 asmlinkage void
@@ -235,7 +201,21 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 {
 	int signo, code;
 
-	if ((regs->ps & ~IPL_MAX) == 0) {
+	if (type == 3) { /* FEN fault */
+		/* Irritating users can call PAL_clrfen to disable the
+		   FPU for the process.  The kernel will then trap in
+		   do_switch_stack and undo_switch_stack when we try
+		   to save and restore the FP registers.
+
+		   Given that GCC by default generates code that uses the
+		   FP registers, PAL_clrfen is not useful except for DoS
+		   attacks.  So turn the bleeding FPU back on and be done
+		   with it.  */
+		current_thread_info()->pcb.flags |= 1;
+		__reload_thread(&current_thread_info()->pcb);
+		return;
+	}
+	if (!user_mode(regs)) {
 		if (type == 1) {
 			const unsigned int *data
 			  = (const unsigned int *) regs->pc;
@@ -268,13 +248,13 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 			regs->pc -= 4;	/* make pc point to former bpt */
 		}
 
-		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->pc, 0,
+		send_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->pc,
 			       current);
 		return;
 
 	      case 1: /* bugcheck */
-		send_sig_fault(SIGTRAP, TRAP_UNK, (void __user *) regs->pc, 0,
-			       current);
+		send_sig_fault_trapno(SIGTRAP, TRAP_UNK,
+				      (void __user *) regs->pc, 0, current);
 		return;
 		
 	      case 2: /* gentrap */
@@ -335,59 +315,19 @@ do_entIF(unsigned long type, struct pt_regs *regs)
 			break;
 		}
 
-		send_sig_fault(signo, code, (void __user *) regs->pc, regs->r16,
-			       current);
+		send_sig_fault_trapno(signo, code, (void __user *) regs->pc,
+				      regs->r16, current);
 		return;
 
 	      case 4: /* opDEC */
-		if (implver() == IMPLVER_EV4) {
-			long si_code;
-
-			/* The some versions of SRM do not handle
-			   the opDEC properly - they return the PC of the
-			   opDEC fault, not the instruction after as the
-			   Alpha architecture requires.  Here we fix it up.
-			   We do this by intentionally causing an opDEC
-			   fault during the boot sequence and testing if
-			   we get the correct PC.  If not, we set a flag
-			   to correct it every time through.  */
-			regs->pc += opDEC_fix; 
-			
-			/* EV4 does not implement anything except normal
-			   rounding.  Everything else will come here as
-			   an illegal instruction.  Emulate them.  */
-			si_code = alpha_fp_emul(regs->pc - 4);
-			if (si_code == 0)
-				return;
-			if (si_code > 0) {
-				send_sig_fault(SIGFPE, si_code,
-					       (void __user *) regs->pc, 0,
-					       current);
-				return;
-			}
-		}
 		break;
 
-	      case 3: /* FEN fault */
-		/* Irritating users can call PAL_clrfen to disable the
-		   FPU for the process.  The kernel will then trap in
-		   do_switch_stack and undo_switch_stack when we try
-		   to save and restore the FP registers.
-
-		   Given that GCC by default generates code that uses the
-		   FP registers, PAL_clrfen is not useful except for DoS
-		   attacks.  So turn the bleeding FPU back on and be done
-		   with it.  */
-		current_thread_info()->pcb.flags |= 1;
-		__reload_thread(&current_thread_info()->pcb);
-		return;
-
 	      case 5: /* illoc */
 	      default: /* unexpected instruction-fault type */
 		      ;
 	}
 
-	send_sig_fault(SIGILL, ILL_ILLOPC, (void __user *)regs->pc, 0, current);
+	send_sig_fault(SIGILL, ILL_ILLOPC, (void __user *)regs->pc, current);
 }
 
 /* There is an ifdef in the PALcode in MILO that enables a 
@@ -402,7 +342,7 @@ do_entDbg(struct pt_regs *regs)
 {
 	die_if_kernel("Instruction fault", regs, 0, NULL);
 
-	force_sig_fault(SIGILL, ILL_ILLOPC, (void __user *)regs->pc, 0);
+	force_sig_fault(SIGILL, ILL_ILLOPC, (void __user *)regs->pc);
 }
 
 
@@ -577,7 +517,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 
 	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
 		pc, va, opcode, reg);
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 
 got_exception:
 	/* Ok, we caught the exception, but we don't want it.  Is there
@@ -625,14 +565,14 @@ got_exception:
 	printk("gp = %016lx  sp = %p\n", regs->gp, regs+1);
 
 	dik_show_code((unsigned int *)pc);
-	dik_show_trace((unsigned long *)(regs+1));
+	dik_show_trace((unsigned long *)(regs+1), KERN_DEFAULT);
 
 	if (test_and_set_thread_flag (TIF_DIE_IF_KERNEL)) {
 		printk("die_if_kernel recursion detected.\n");
 		local_irq_enable();
 		while (1);
 	}
-	do_exit(SIGSEGV);
+	make_task_dead(SIGSEGV);
 }
 
 /*
@@ -709,7 +649,7 @@ s_reg_to_mem (unsigned long s_reg)
 static int unauser_reg_offsets[32] = {
 	R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), R(r8),
 	/* r9 ... r15 are stored in front of regs.  */
-	-56, -48, -40, -32, -24, -16, -8,
+	-64, -56, -48, -40, -32, -24, -16,	/* padding at -8 */
 	R(r16), R(r17), R(r18),
 	R(r19), R(r20), R(r21), R(r22), R(r23), R(r24), R(r25), R(r26),
 	R(r27), R(r28), R(gp),
@@ -730,7 +670,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	long error;
 
 	/* Check the UAC bits to decide what the user wants us to do
-	   with the unaliged access.  */
+	   with the unaligned access.  */
 
 	if (!(current_thread_info()->status & TS_UAC_NOPRINT)) {
 		if (__ratelimit(&ratelimit)) {
@@ -883,7 +823,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 
 	case 0x26: /* sts */
 		fake_reg = s_reg_to_mem(alpha_read_fp_reg(reg));
-		/* FALLTHRU */
+		fallthrough;
 
 	case 0x2c: /* stl */
 		__asm__ __volatile__(
@@ -911,7 +851,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 
 	case 0x27: /* stt */
 		fake_reg = alpha_read_fp_reg(reg);
-		/* FALLTHRU */
+		fallthrough;
 
 	case 0x2d: /* stq */
 		__asm__ __volatile__(
@@ -957,19 +897,19 @@ give_sigsegv:
 		si_code = SEGV_ACCERR;
 	else {
 		struct mm_struct *mm = current->mm;
-		down_read(&mm->mmap_sem);
+		mmap_read_lock(mm);
 		if (find_vma(mm, (unsigned long)va))
 			si_code = SEGV_ACCERR;
 		else
 			si_code = SEGV_MAPERR;
-		up_read(&mm->mmap_sem);
+		mmap_read_unlock(mm);
 	}
-	send_sig_fault(SIGSEGV, si_code, va, 0, current);
+	send_sig_fault(SIGSEGV, si_code, va, current);
 	return;
 
 give_sigbus:
 	regs->pc -= 4;
-	send_sig_fault(SIGBUS, BUS_ADRALN, va, 0, current);
+	send_sig_fault(SIGBUS, BUS_ADRALN, va, current);
 	return;
 }
 
@@ -980,11 +920,6 @@ trap_init(void)
 	register unsigned long gptr __asm__("$29");
 	wrkgp(gptr);
 
-	/* Hack for Multia (UDB) and JENSEN: some of their SRMs have
-	   a bug in the handling of the opDEC fault.  Fix it up if so.  */
-	if (implver() == IMPLVER_EV4)
-		opDEC_check();
-
 	wrent(entArith, 1);
 	wrent(entMM, 2);
 	wrent(entIF, 3);
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index c4b5ceceab52..2efa7dfc798a 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -1,4 +1,8 @@
 /* SPDX-License-Identifier: GPL-2.0 */
+
+#define EMITS_PT_NOTE
+#define RO_EXCEPTION_TABLE_ALIGN	16
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/thread_info.h>
 #include <asm/cache.h>
@@ -8,7 +12,7 @@
 OUTPUT_FORMAT("elf64-alpha")
 OUTPUT_ARCH(alpha)
 ENTRY(__start)
-PHDRS { kernel PT_LOAD; note PT_NOTE; }
+PHDRS { text PT_LOAD; note PT_NOTE; }
 jiffies = jiffies_64;
 SECTIONS
 {
@@ -23,21 +27,14 @@ SECTIONS
 		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
-		CPUIDLE_TEXT
 		LOCK_TEXT
 		*(.fixup)
 		*(.gnu.warning)
-	} :kernel
+	} :text
 	swapper_pg_dir = SWAPPER_PGD;
 	_etext = .;	/* End of text section */
 
-	NOTES :kernel :note
-	.dummy : {
-		*(.dummy)
-	} :kernel
-
-	RODATA
-	EXCEPTION_TABLE(16)
+	RO_DATA(4096)
 
 	/* Will be freed after init */
 	__init_begin = ALIGN(PAGE_SIZE);
@@ -52,7 +49,7 @@ SECTIONS
 
 	_sdata = .;	/* Start of rw data section */
 	_data = .;
-	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 
 	.got : {
 		*(.got)
@@ -74,6 +71,7 @@ SECTIONS
 
 	STABS_DEBUG
 	DWARF_DEBUG
+	ELF_DETAILS
 
 	DISCARDS
 }
diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile
index 854d5e79979e..84046e730e6d 100644
--- a/arch/alpha/lib/Makefile
+++ b/arch/alpha/lib/Makefile
@@ -4,7 +4,6 @@
 #
 
 asflags-y := $(KBUILD_CFLAGS)
-ccflags-y := -Werror
 
 # Many of these routines have implementations tuned for ev6.
 # Choose them iff we're targeting ev6 specifically.
@@ -14,6 +13,7 @@ ev6-$(CONFIG_ALPHA_EV6) := ev6-
 ev67-$(CONFIG_ALPHA_EV67) := ev67-
 
 lib-y =	__divqu.o __remqu.o __divlu.o __remlu.o \
+	udiv-qrnnd.o \
 	udelay.o \
 	$(ev6-y)memset.o \
 	$(ev6-y)memcpy.o \
@@ -44,17 +44,3 @@ AFLAGS___remlu.o =       -DREM -DINTSIZE
 $(addprefix $(obj)/,__divqu.o __remqu.o __divlu.o __remlu.o): \
 						$(src)/$(ev6-y)divide.S FORCE
 	$(call if_changed_rule,as_o_S)
-
-# There are direct branches between {str*cpy,str*cat} and stx*cpy.
-# Ensure the branches are within range by merging these objects.
-
-LDFLAGS_stycpy.o := -r
-LDFLAGS_styncpy.o := -r
-
-$(obj)/stycpy.o: $(obj)/strcpy.o $(obj)/$(ev67-y)strcat.o \
-		 $(obj)/$(ev6-y)stxcpy.o FORCE
-	$(call if_changed,ld)
-
-$(obj)/styncpy.o: $(obj)/strncpy.o $(obj)/$(ev67-y)strncat.o \
-		 $(obj)/$(ev6-y)stxncpy.o FORCE
-	$(call if_changed,ld)
diff --git a/arch/alpha/lib/callback_srm.S b/arch/alpha/lib/callback_srm.S
index b13c4a231f1b..36b63f295170 100644
--- a/arch/alpha/lib/callback_srm.S
+++ b/arch/alpha/lib/callback_srm.S
@@ -3,8 +3,8 @@
  *	arch/alpha/lib/callback_srm.S
  */
 
+#include <linux/export.h>
 #include <asm/console.h>
-#include <asm/export.h>
 
 .text
 #define HWRPB_CRB_OFFSET 0xc0
diff --git a/arch/alpha/lib/checksum.c b/arch/alpha/lib/checksum.c
index 3f35c3ed6948..27b2a9edf3cc 100644
--- a/arch/alpha/lib/checksum.c
+++ b/arch/alpha/lib/checksum.c
@@ -12,8 +12,10 @@
  
 #include <linux/module.h>
 #include <linux/string.h>
+#include <net/checksum.h>
 
 #include <asm/byteorder.h>
+#include <asm/checksum.h>
 
 static inline unsigned short from64to16(unsigned long x)
 {
diff --git a/arch/alpha/lib/clear_page.S b/arch/alpha/lib/clear_page.S
index ce02de7b0493..af70ee309a33 100644
--- a/arch/alpha/lib/clear_page.S
+++ b/arch/alpha/lib/clear_page.S
@@ -4,7 +4,7 @@
  *
  * Zero an entire page.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 	.align 4
 	.global clear_page
diff --git a/arch/alpha/lib/clear_user.S b/arch/alpha/lib/clear_user.S
index db6c6ca45896..848eb60a0010 100644
--- a/arch/alpha/lib/clear_user.S
+++ b/arch/alpha/lib/clear_user.S
@@ -10,7 +10,7 @@
  * a successful copy).  There is also some rather minor exception setup
  * stuff.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 
 /* Allow an exception for an insn; exit if we get one.  */
 #define EX(x,y...)			\
diff --git a/arch/alpha/lib/copy_page.S b/arch/alpha/lib/copy_page.S
index 5439a30c77d0..1c444fdad9a5 100644
--- a/arch/alpha/lib/copy_page.S
+++ b/arch/alpha/lib/copy_page.S
@@ -4,7 +4,7 @@
  *
  * Copy an entire page.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 	.align 4
 	.global copy_page
diff --git a/arch/alpha/lib/copy_user.S b/arch/alpha/lib/copy_user.S
index 32ab0344b185..ef18faafcad6 100644
--- a/arch/alpha/lib/copy_user.S
+++ b/arch/alpha/lib/copy_user.S
@@ -12,7 +12,7 @@
  * exception setup stuff..
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 
 /* Allow an exception for an insn; exit if we get one.  */
 #define EXI(x,y...)			\
diff --git a/arch/alpha/lib/csum_ipv6_magic.S b/arch/alpha/lib/csum_ipv6_magic.S
index c7b213ab01ab..273c426c3859 100644
--- a/arch/alpha/lib/csum_ipv6_magic.S
+++ b/arch/alpha/lib/csum_ipv6_magic.S
@@ -13,7 +13,7 @@
  * added by Ivan Kokshaysky <ink@jurassic.park.msu.ru>
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.globl csum_ipv6_magic
 	.align 4
 	.ent csum_ipv6_magic
diff --git a/arch/alpha/lib/csum_partial_copy.c b/arch/alpha/lib/csum_partial_copy.c
index e53f96e8aa6d..4d180d96f09e 100644
--- a/arch/alpha/lib/csum_partial_copy.c
+++ b/arch/alpha/lib/csum_partial_copy.c
@@ -13,6 +13,7 @@
 #include <linux/types.h>
 #include <linux/string.h>
 #include <linux/uaccess.h>
+#include <net/checksum.h>
 
 
 #define ldq_u(x,y) \
@@ -39,12 +40,11 @@ __asm__ __volatile__("insql %1,%2,%0":"=r" (z):"r" (x),"r" (y))
 #define insqh(x,y,z) \
 __asm__ __volatile__("insqh %1,%2,%0":"=r" (z):"r" (x),"r" (y))
 
-
-#define __get_user_u(x,ptr)				\
+#define __get_word(insn,x,ptr)				\
 ({							\
 	long __guu_err;					\
 	__asm__ __volatile__(				\
-	"1:	ldq_u %0,%2\n"				\
+	"1:	"#insn" %0,%2\n"			\
 	"2:\n"						\
 	EXC(1b,2b,%0,%1)				\
 		: "=r"(x), "=r"(__guu_err)		\
@@ -52,19 +52,6 @@ __asm__ __volatile__("insqh %1,%2,%0":"=r" (z):"r" (x),"r" (y))
 	__guu_err;					\
 })
 
-#define __put_user_u(x,ptr)				\
-({							\
-	long __puu_err;					\
-	__asm__ __volatile__(				\
-	"1:	stq_u %2,%1\n"				\
-	"2:\n"						\
-	EXC(1b,2b,$31,%0)				\
-		: "=r"(__puu_err)			\
-		: "m"(__m(addr)), "rJ"(x), "0"(0));	\
-	__puu_err;					\
-})
-
-
 static inline unsigned short from64to16(unsigned long x)
 {
 	/* Using extract instructions is a bit more efficient
@@ -95,15 +82,15 @@ static inline unsigned short from64to16(unsigned long x)
  */
 static inline unsigned long
 csum_partial_cfu_aligned(const unsigned long __user *src, unsigned long *dst,
-			 long len, unsigned long checksum,
-			 int *errp)
+			 long len)
 {
+	unsigned long checksum = ~0U;
 	unsigned long carry = 0;
-	int err = 0;
 
 	while (len >= 0) {
 		unsigned long word;
-		err |= __get_user(word, src);
+		if (__get_word(ldq, word, src))
+			return 0;
 		checksum += carry;
 		src++;
 		checksum += word;
@@ -116,7 +103,8 @@ csum_partial_cfu_aligned(const unsigned long __user *src, unsigned long *dst,
 	checksum += carry;
 	if (len) {
 		unsigned long word, tmp;
-		err |= __get_user(word, src);
+		if (__get_word(ldq, word, src))
+			return 0;
 		tmp = *dst;
 		mskql(word, len, word);
 		checksum += word;
@@ -125,7 +113,6 @@ csum_partial_cfu_aligned(const unsigned long __user *src, unsigned long *dst,
 		*dst = word | tmp;
 		checksum += carry;
 	}
-	if (err && errp) *errp = err;
 	return checksum;
 }
 
@@ -137,20 +124,21 @@ static inline unsigned long
 csum_partial_cfu_dest_aligned(const unsigned long __user *src,
 			      unsigned long *dst,
 			      unsigned long soff,
-			      long len, unsigned long checksum,
-			      int *errp)
+			      long len)
 {
 	unsigned long first;
 	unsigned long word, carry;
 	unsigned long lastsrc = 7+len+(unsigned long)src;
-	int err = 0;
+	unsigned long checksum = ~0U;
 
-	err |= __get_user_u(first,src);
+	if (__get_word(ldq_u, first,src))
+		return 0;
 	carry = 0;
 	while (len >= 0) {
 		unsigned long second;
 
-		err |= __get_user_u(second, src+1);
+		if (__get_word(ldq_u, second, src+1))
+			return 0;
 		extql(first, soff, word);
 		len -= 8;
 		src++;
@@ -168,7 +156,8 @@ csum_partial_cfu_dest_aligned(const unsigned long __user *src,
 	if (len) {
 		unsigned long tmp;
 		unsigned long second;
-		err |= __get_user_u(second, lastsrc);
+		if (__get_word(ldq_u, second, lastsrc))
+			return 0;
 		tmp = *dst;
 		extql(first, soff, word);
 		extqh(second, soff, first);
@@ -180,7 +169,6 @@ csum_partial_cfu_dest_aligned(const unsigned long __user *src,
 		*dst = word | tmp;
 		checksum += carry;
 	}
-	if (err && errp) *errp = err;
 	return checksum;
 }
 
@@ -191,18 +179,18 @@ static inline unsigned long
 csum_partial_cfu_src_aligned(const unsigned long __user *src,
 			     unsigned long *dst,
 			     unsigned long doff,
-			     long len, unsigned long checksum,
-			     unsigned long partial_dest,
-			     int *errp)
+			     long len,
+			     unsigned long partial_dest)
 {
 	unsigned long carry = 0;
 	unsigned long word;
 	unsigned long second_dest;
-	int err = 0;
+	unsigned long checksum = ~0U;
 
 	mskql(partial_dest, doff, partial_dest);
 	while (len >= 0) {
-		err |= __get_user(word, src);
+		if (__get_word(ldq, word, src))
+			return 0;
 		len -= 8;
 		insql(word, doff, second_dest);
 		checksum += carry;
@@ -216,7 +204,8 @@ csum_partial_cfu_src_aligned(const unsigned long __user *src,
 	len += 8;
 	if (len) {
 		checksum += carry;
-		err |= __get_user(word, src);
+		if (__get_word(ldq, word, src))
+			return 0;
 		mskql(word, len, word);
 		len -= 8;
 		checksum += word;
@@ -237,7 +226,6 @@ csum_partial_cfu_src_aligned(const unsigned long __user *src,
 	stq_u(partial_dest | second_dest, dst);
 out:
 	checksum += carry;
-	if (err && errp) *errp = err;
 	return checksum;
 }
 
@@ -249,23 +237,23 @@ static inline unsigned long
 csum_partial_cfu_unaligned(const unsigned long __user * src,
 			   unsigned long * dst,
 			   unsigned long soff, unsigned long doff,
-			   long len, unsigned long checksum,
-			   unsigned long partial_dest,
-			   int *errp)
+			   long len, unsigned long partial_dest)
 {
 	unsigned long carry = 0;
 	unsigned long first;
 	unsigned long lastsrc;
-	int err = 0;
+	unsigned long checksum = ~0U;
 
-	err |= __get_user_u(first, src);
+	if (__get_word(ldq_u, first, src))
+		return 0;
 	lastsrc = 7+len+(unsigned long)src;
 	mskql(partial_dest, doff, partial_dest);
 	while (len >= 0) {
 		unsigned long second, word;
 		unsigned long second_dest;
 
-		err |= __get_user_u(second, src+1);
+		if (__get_word(ldq_u, second, src+1))
+			return 0;
 		extql(first, soff, word);
 		checksum += carry;
 		len -= 8;
@@ -286,7 +274,8 @@ csum_partial_cfu_unaligned(const unsigned long __user * src,
 		unsigned long second, word;
 		unsigned long second_dest;
 
-		err |= __get_user_u(second, lastsrc);
+		if (__get_word(ldq_u, second, lastsrc))
+			return 0;
 		extql(first, soff, word);
 		extqh(second, soff, first);
 		word |= first;
@@ -307,7 +296,8 @@ csum_partial_cfu_unaligned(const unsigned long __user * src,
 		unsigned long second, word;
 		unsigned long second_dest;
 
-		err |= __get_user_u(second, lastsrc);
+		if (__get_word(ldq_u, second, lastsrc))
+			return 0;
 		extql(first, soff, word);
 		extqh(second, soff, first);
 		word |= first;
@@ -320,66 +310,54 @@ csum_partial_cfu_unaligned(const unsigned long __user * src,
 		stq_u(partial_dest | word | second_dest, dst);
 		checksum += carry;
 	}
-	if (err && errp) *errp = err;
 	return checksum;
 }
 
-__wsum
-csum_partial_copy_from_user(const void __user *src, void *dst, int len,
-			       __wsum sum, int *errp)
+static __wsum __csum_and_copy(const void __user *src, void *dst, int len)
 {
-	unsigned long checksum = (__force u32) sum;
 	unsigned long soff = 7 & (unsigned long) src;
 	unsigned long doff = 7 & (unsigned long) dst;
-
-	if (len) {
-		if (!access_ok(src, len)) {
-			if (errp) *errp = -EFAULT;
-			memset(dst, 0, len);
-			return sum;
-		}
-		if (!doff) {
-			if (!soff)
-				checksum = csum_partial_cfu_aligned(
-					(const unsigned long __user *) src,
-					(unsigned long *) dst,
-					len-8, checksum, errp);
-			else
-				checksum = csum_partial_cfu_dest_aligned(
-					(const unsigned long __user *) src,
-					(unsigned long *) dst,
-					soff, len-8, checksum, errp);
-		} else {
-			unsigned long partial_dest;
-			ldq_u(partial_dest, dst);
-			if (!soff)
-				checksum = csum_partial_cfu_src_aligned(
-					(const unsigned long __user *) src,
-					(unsigned long *) dst,
-					doff, len-8, checksum,
-					partial_dest, errp);
-			else
-				checksum = csum_partial_cfu_unaligned(
-					(const unsigned long __user *) src,
-					(unsigned long *) dst,
-					soff, doff, len-8, checksum,
-					partial_dest, errp);
-		}
-		checksum = from64to16 (checksum);
+	unsigned long checksum;
+
+	if (!doff) {
+		if (!soff)
+			checksum = csum_partial_cfu_aligned(
+				(const unsigned long __user *) src,
+				(unsigned long *) dst, len-8);
+		else
+			checksum = csum_partial_cfu_dest_aligned(
+				(const unsigned long __user *) src,
+				(unsigned long *) dst,
+				soff, len-8);
+	} else {
+		unsigned long partial_dest;
+		ldq_u(partial_dest, dst);
+		if (!soff)
+			checksum = csum_partial_cfu_src_aligned(
+				(const unsigned long __user *) src,
+				(unsigned long *) dst,
+				doff, len-8, partial_dest);
+		else
+			checksum = csum_partial_cfu_unaligned(
+				(const unsigned long __user *) src,
+				(unsigned long *) dst,
+				soff, doff, len-8, partial_dest);
 	}
-	return (__force __wsum)checksum;
+	return (__force __wsum)from64to16 (checksum);
 }
-EXPORT_SYMBOL(csum_partial_copy_from_user);
 
 __wsum
-csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
+csum_and_copy_from_user(const void __user *src, void *dst, int len)
 {
-	__wsum checksum;
-	mm_segment_t oldfs = get_fs();
-	set_fs(KERNEL_DS);
-	checksum = csum_partial_copy_from_user((__force const void __user *)src,
-						dst, len, sum, NULL);
-	set_fs(oldfs);
-	return checksum;
+	if (!access_ok(src, len))
+		return 0;
+	return __csum_and_copy(src, dst, len);
+}
+
+__wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len)
+{
+	return __csum_and_copy((__force const void __user *)src,
+						dst, len);
 }
 EXPORT_SYMBOL(csum_partial_copy_nocheck);
diff --git a/arch/alpha/lib/divide.S b/arch/alpha/lib/divide.S
index 2b60eb45e50b..db01840d76ec 100644
--- a/arch/alpha/lib/divide.S
+++ b/arch/alpha/lib/divide.S
@@ -46,7 +46,7 @@
  *	$28 - compare status
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 #define halt .long 0
 
 /*
diff --git a/arch/alpha/lib/ev6-clear_page.S b/arch/alpha/lib/ev6-clear_page.S
index 325864c81586..a534d9ff7161 100644
--- a/arch/alpha/lib/ev6-clear_page.S
+++ b/arch/alpha/lib/ev6-clear_page.S
@@ -4,7 +4,7 @@
  *
  * Zero an entire page.
  */
-#include <asm/export.h>
+#include <linux/export.h>
         .text
         .align 4
         .global clear_page
diff --git a/arch/alpha/lib/ev6-clear_user.S b/arch/alpha/lib/ev6-clear_user.S
index 7e644f83cdf2..af776cc45f91 100644
--- a/arch/alpha/lib/ev6-clear_user.S
+++ b/arch/alpha/lib/ev6-clear_user.S
@@ -29,7 +29,7 @@
  *	want to leave a hole (and we also want to avoid repeating lots of work)
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 /* Allow an exception for an insn; exit if we get one.  */
 #define EX(x,y...)			\
 	99: x,##y;			\
diff --git a/arch/alpha/lib/ev6-copy_page.S b/arch/alpha/lib/ev6-copy_page.S
index fd7212c8dcf1..36be5113b7b7 100644
--- a/arch/alpha/lib/ev6-copy_page.S
+++ b/arch/alpha/lib/ev6-copy_page.S
@@ -57,7 +57,7 @@
    destination pages are in the dcache, but it is my guess that this is
    less important than the dcache miss case.  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 	.align 4
 	.global copy_page
diff --git a/arch/alpha/lib/ev6-copy_user.S b/arch/alpha/lib/ev6-copy_user.S
index f3e433754397..b9b19710c364 100644
--- a/arch/alpha/lib/ev6-copy_user.S
+++ b/arch/alpha/lib/ev6-copy_user.S
@@ -23,7 +23,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 /* Allow an exception for an insn; exit if we get one.  */
 #define EXI(x,y...)			\
 	99: x,##y;			\
diff --git a/arch/alpha/lib/ev6-csum_ipv6_magic.S b/arch/alpha/lib/ev6-csum_ipv6_magic.S
index 9a73f90700a1..2ee548be98e3 100644
--- a/arch/alpha/lib/ev6-csum_ipv6_magic.S
+++ b/arch/alpha/lib/ev6-csum_ipv6_magic.S
@@ -53,7 +53,7 @@
  * may cause additional delay in rare cases (load-load replay traps).
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.globl csum_ipv6_magic
 	.align 4
 	.ent csum_ipv6_magic
diff --git a/arch/alpha/lib/ev6-divide.S b/arch/alpha/lib/ev6-divide.S
index 137ff1a07356..b73a6d26362e 100644
--- a/arch/alpha/lib/ev6-divide.S
+++ b/arch/alpha/lib/ev6-divide.S
@@ -56,7 +56,7 @@
  * Try not to change the actual algorithm if possible for consistency.
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 #define halt .long 0
 
 /*
diff --git a/arch/alpha/lib/ev6-memchr.S b/arch/alpha/lib/ev6-memchr.S
index 56bf9e14eeee..f75ba43e61e3 100644
--- a/arch/alpha/lib/ev6-memchr.S
+++ b/arch/alpha/lib/ev6-memchr.S
@@ -28,7 +28,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  * Try not to change the actual algorithm if possible for consistency.
  */
-#include <asm/export.h>
+#include <linux/export.h>
         .set noreorder
         .set noat
 
diff --git a/arch/alpha/lib/ev6-memcpy.S b/arch/alpha/lib/ev6-memcpy.S
index ffbd056b6eb2..3ef43c26c8af 100644
--- a/arch/alpha/lib/ev6-memcpy.S
+++ b/arch/alpha/lib/ev6-memcpy.S
@@ -20,7 +20,7 @@
  * Temp usage notes:
  *	$1,$2,		- scratch
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noreorder
 	.set noat
 
diff --git a/arch/alpha/lib/ev6-memset.S b/arch/alpha/lib/ev6-memset.S
index 1cfcfbbea6f0..89d7809da4cc 100644
--- a/arch/alpha/lib/ev6-memset.S
+++ b/arch/alpha/lib/ev6-memset.S
@@ -27,7 +27,7 @@
  * as fixes will need to be made in multiple places.  The performance gain
  * is worth it.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 .text
diff --git a/arch/alpha/lib/ev67-strcat.S b/arch/alpha/lib/ev67-strcat.S
index ec3096a9e8d4..f8c7305b11d6 100644
--- a/arch/alpha/lib/ev67-strcat.S
+++ b/arch/alpha/lib/ev67-strcat.S
@@ -20,7 +20,7 @@
  * string once.
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 4
diff --git a/arch/alpha/lib/ev67-strchr.S b/arch/alpha/lib/ev67-strchr.S
index fbf89e0b6dc3..97a7cb475309 100644
--- a/arch/alpha/lib/ev67-strchr.S
+++ b/arch/alpha/lib/ev67-strchr.S
@@ -16,7 +16,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  * Try not to change the actual algorithm if possible for consistency.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/ev67-strlen.S b/arch/alpha/lib/ev67-strlen.S
index b73106ffbbc7..3d9078807ab4 100644
--- a/arch/alpha/lib/ev67-strlen.S
+++ b/arch/alpha/lib/ev67-strlen.S
@@ -18,7 +18,7 @@
  *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noreorder
 	.set noat
 
diff --git a/arch/alpha/lib/ev67-strncat.S b/arch/alpha/lib/ev67-strncat.S
index ceb0ca528789..8f313233e3a7 100644
--- a/arch/alpha/lib/ev67-strncat.S
+++ b/arch/alpha/lib/ev67-strncat.S
@@ -21,7 +21,7 @@
  * Try not to change the actual algorithm if possible for consistency.
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 4
diff --git a/arch/alpha/lib/ev67-strrchr.S b/arch/alpha/lib/ev67-strrchr.S
index 7f80e398530f..ae7355f9ec56 100644
--- a/arch/alpha/lib/ev67-strrchr.S
+++ b/arch/alpha/lib/ev67-strrchr.S
@@ -19,7 +19,7 @@
  *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
  */
 
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/fpreg.c b/arch/alpha/lib/fpreg.c
index 34fea465645b..3d32165043f8 100644
--- a/arch/alpha/lib/fpreg.c
+++ b/arch/alpha/lib/fpreg.c
@@ -7,6 +7,9 @@
 
 #include <linux/compiler.h>
 #include <linux/export.h>
+#include <linux/preempt.h>
+#include <asm/fpu.h>
+#include <asm/thread_info.h>
 
 #if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67)
 #define STT(reg,val)  asm volatile ("ftoit $f"#reg",%0" : "=r"(val));
@@ -19,7 +22,12 @@ alpha_read_fp_reg (unsigned long reg)
 {
 	unsigned long val;
 
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return 0;
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP)
+		val = current_thread_info()->fp[reg];
+	else switch (reg) {
 	      case  0: STT( 0, val); break;
 	      case  1: STT( 1, val); break;
 	      case  2: STT( 2, val); break;
@@ -52,8 +60,8 @@ alpha_read_fp_reg (unsigned long reg)
 	      case 29: STT(29, val); break;
 	      case 30: STT(30, val); break;
 	      case 31: STT(31, val); break;
-	      default: return 0;
 	}
+	preempt_enable();
 	return val;
 }
 EXPORT_SYMBOL(alpha_read_fp_reg);
@@ -67,7 +75,14 @@ EXPORT_SYMBOL(alpha_read_fp_reg);
 void
 alpha_write_fp_reg (unsigned long reg, unsigned long val)
 {
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		current_thread_info()->fp[reg] = val;
+	} else switch (reg) {
 	      case  0: LDT( 0, val); break;
 	      case  1: LDT( 1, val); break;
 	      case  2: LDT( 2, val); break;
@@ -101,6 +116,7 @@ alpha_write_fp_reg (unsigned long reg, unsigned long val)
 	      case 30: LDT(30, val); break;
 	      case 31: LDT(31, val); break;
 	}
+	preempt_enable();
 }
 EXPORT_SYMBOL(alpha_write_fp_reg);
 
@@ -115,7 +131,14 @@ alpha_read_fp_reg_s (unsigned long reg)
 {
 	unsigned long val;
 
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return 0;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		LDT(0, current_thread_info()->fp[reg]);
+		STS(0, val);
+	} else switch (reg) {
 	      case  0: STS( 0, val); break;
 	      case  1: STS( 1, val); break;
 	      case  2: STS( 2, val); break;
@@ -148,8 +171,8 @@ alpha_read_fp_reg_s (unsigned long reg)
 	      case 29: STS(29, val); break;
 	      case 30: STS(30, val); break;
 	      case 31: STS(31, val); break;
-	      default: return 0;
 	}
+	preempt_enable();
 	return val;
 }
 EXPORT_SYMBOL(alpha_read_fp_reg_s);
@@ -163,7 +186,15 @@ EXPORT_SYMBOL(alpha_read_fp_reg_s);
 void
 alpha_write_fp_reg_s (unsigned long reg, unsigned long val)
 {
-	switch (reg) {
+	if (unlikely(reg >= 32))
+		return;
+
+	preempt_disable();
+	if (current_thread_info()->status & TS_SAVED_FP) {
+		current_thread_info()->status |= TS_RESTORE_FP;
+		LDS(0, val);
+		STT(0, current_thread_info()->fp[reg]);
+	} else switch (reg) {
 	      case  0: LDS( 0, val); break;
 	      case  1: LDS( 1, val); break;
 	      case  2: LDS( 2, val); break;
@@ -197,5 +228,6 @@ alpha_write_fp_reg_s (unsigned long reg, unsigned long val)
 	      case 30: LDS(30, val); break;
 	      case 31: LDS(31, val); break;
 	}
+	preempt_enable();
 }
 EXPORT_SYMBOL(alpha_write_fp_reg_s);
diff --git a/arch/alpha/lib/memchr.S b/arch/alpha/lib/memchr.S
index c13d3eca2e05..45366e32feee 100644
--- a/arch/alpha/lib/memchr.S
+++ b/arch/alpha/lib/memchr.S
@@ -31,7 +31,7 @@ For correctness consider that:
       - only minimum number of quadwords may be accessed
       - the third argument is an unsigned long
 */
-#include <asm/export.h>
+#include <linux/export.h>
         .set noreorder
         .set noat
 
diff --git a/arch/alpha/lib/memcpy.c b/arch/alpha/lib/memcpy.c
index cbac3dc6d963..78b6850a9d53 100644
--- a/arch/alpha/lib/memcpy.c
+++ b/arch/alpha/lib/memcpy.c
@@ -18,6 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/export.h>
+#include <linux/string.h>
 
 /*
  * This should be done in one go with ldq_u*2/mask/stq_u. Do it
@@ -150,6 +151,8 @@ static inline void __memcpy_aligned_dn (unsigned long d, unsigned long s,
 	DO_REST_ALIGNED_DN(d,s,n);
 }
 
+#undef memcpy
+
 void * memcpy(void * dest, const void *src, size_t n)
 {
 	if (!(((unsigned long) dest ^ (unsigned long) src) & 7)) {
diff --git a/arch/alpha/lib/memmove.S b/arch/alpha/lib/memmove.S
index 42d1922d0edf..3a27689e3390 100644
--- a/arch/alpha/lib/memmove.S
+++ b/arch/alpha/lib/memmove.S
@@ -7,7 +7,7 @@
  * This is hand-massaged output from the original memcpy.c.  We defer to
  * memcpy whenever possible; the backwards copy loops are not unrolled.
  */
-#include <asm/export.h>        
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 	.text
diff --git a/arch/alpha/lib/memset.S b/arch/alpha/lib/memset.S
index 00393e30df25..9075d6918346 100644
--- a/arch/alpha/lib/memset.S
+++ b/arch/alpha/lib/memset.S
@@ -14,7 +14,7 @@
  * The scheduling comments are according to the EV5 documentation (and done by 
  * hand, so they might well be incorrect, please do tell me about it..)
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 .text
diff --git a/arch/alpha/lib/stacktrace.c b/arch/alpha/lib/stacktrace.c
index 62454a7810e2..2b1176dd5174 100644
--- a/arch/alpha/lib/stacktrace.c
+++ b/arch/alpha/lib/stacktrace.c
@@ -92,7 +92,7 @@ stacktrace(void)
 {
 	instr * ret_pc;
 	instr * prologue = (instr *)stacktrace;
-	register unsigned char * sp __asm__ ("$30");
+	unsigned char *sp = (unsigned char *)current_stack_pointer;
 
 	printk("\tstack trace:\n");
 	do {
diff --git a/arch/alpha/lib/strcat.S b/arch/alpha/lib/strcat.S
index 055877dccd27..62b90ebbcf44 100644
--- a/arch/alpha/lib/strcat.S
+++ b/arch/alpha/lib/strcat.S
@@ -5,7 +5,7 @@
  *
  * Append a null-terminated string from SRC to DST.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 
 	.text
 
diff --git a/arch/alpha/lib/strchr.S b/arch/alpha/lib/strchr.S
index 17871dd00280..68c54ff50dfe 100644
--- a/arch/alpha/lib/strchr.S
+++ b/arch/alpha/lib/strchr.S
@@ -6,7 +6,7 @@
  * Return the address of a given character within a null-terminated
  * string, or null if it is not found.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/strcpy.S b/arch/alpha/lib/strcpy.S
index cb74ad23a90d..d8773ba77525 100644
--- a/arch/alpha/lib/strcpy.S
+++ b/arch/alpha/lib/strcpy.S
@@ -6,7 +6,7 @@
  * Copy a null-terminated string from SRC to DST.  Return a pointer
  * to the null-terminator in the source.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 3
diff --git a/arch/alpha/lib/strlen.S b/arch/alpha/lib/strlen.S
index dd882fe4d7e3..4fc6a6ff24cd 100644
--- a/arch/alpha/lib/strlen.S
+++ b/arch/alpha/lib/strlen.S
@@ -12,7 +12,7 @@
  *	  do this instead of the 9 instructions that
  *	  binary search needs).
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noreorder
 	.set noat
 
diff --git a/arch/alpha/lib/strncat.S b/arch/alpha/lib/strncat.S
index 522fee3e26ac..a913a7c84a39 100644
--- a/arch/alpha/lib/strncat.S
+++ b/arch/alpha/lib/strncat.S
@@ -10,7 +10,7 @@
  * past count, whereas libc may write to count+1.  This follows the generic
  * implementation in lib/string.c and is, IMHO, more sensible.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.text
 
 	.align 3
diff --git a/arch/alpha/lib/strncpy.S b/arch/alpha/lib/strncpy.S
index cc57fad8b7ca..cb90cf022df3 100644
--- a/arch/alpha/lib/strncpy.S
+++ b/arch/alpha/lib/strncpy.S
@@ -11,7 +11,7 @@
  * version has cropped that bit o' nastiness as well as assuming that
  * __stxncpy is in range of a branch.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 	.set noat
 	.set noreorder
 
diff --git a/arch/alpha/lib/strrchr.S b/arch/alpha/lib/strrchr.S
index 7650ba99b7e2..dd8e073b6cf2 100644
--- a/arch/alpha/lib/strrchr.S
+++ b/arch/alpha/lib/strrchr.S
@@ -6,7 +6,7 @@
  * Return the address of the last occurrence of a given character
  * within a null-terminated string, or null if it is not found.
  */
-#include <asm/export.h>
+#include <linux/export.h>
 #include <asm/regdef.h>
 
 	.set noreorder
diff --git a/arch/alpha/lib/stycpy.S b/arch/alpha/lib/stycpy.S
new file mode 100644
index 000000000000..32ecd9c5f90d
--- /dev/null
+++ b/arch/alpha/lib/stycpy.S
@@ -0,0 +1,11 @@
+#include "strcpy.S"
+#ifdef CONFIG_ALPHA_EV67
+#include "ev67-strcat.S"
+#else
+#include "strcat.S"
+#endif
+#ifdef CONFIG_ALPHA_EV6
+#include "ev6-stxcpy.S"
+#else
+#include "stxcpy.S"
+#endif
diff --git a/arch/alpha/lib/styncpy.S b/arch/alpha/lib/styncpy.S
new file mode 100644
index 000000000000..72fc2754eb57
--- /dev/null
+++ b/arch/alpha/lib/styncpy.S
@@ -0,0 +1,11 @@
+#include "strncpy.S"
+#ifdef CONFIG_ALPHA_EV67
+#include "ev67-strncat.S"
+#else
+#include "strncat.S"
+#endif
+#ifdef CONFIG_ALPHA_EV6
+#include "ev6-stxncpy.S"
+#else
+#include "stxncpy.S"
+#endif
diff --git a/arch/alpha/lib/udiv-qrnnd.S b/arch/alpha/lib/udiv-qrnnd.S
new file mode 100644
index 000000000000..96f05918bffe
--- /dev/null
+++ b/arch/alpha/lib/udiv-qrnnd.S
@@ -0,0 +1,165 @@
+ # Alpha 21064 __udiv_qrnnd
+ # Copyright (C) 1992, 1994, 1995, 2000 Free Software Foundation, Inc.
+
+ # This file is part of GCC.
+
+ # The GNU MP Library is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+ # the Free Software Foundation; either version 2 of the License, or (at your
+ # option) any later version.
+
+ # In addition to the permissions in the GNU General Public License, the
+ # Free Software Foundation gives you unlimited permission to link the
+ # compiled version of this file with other programs, and to distribute
+ # those programs without any restriction coming from the use of this
+ # file.  (The General Public License restrictions do apply in other
+ # respects; for example, they cover modification of the file, and
+ # distribution when not linked into another program.)
+
+ # This file is distributed in the hope that it will be useful, but
+ # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Library General Public
+ # License for more details.
+
+ # You should have received a copy of the GNU General Public License
+ # along with GCC; see the file COPYING.  If not, write to the 
+ # Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ # MA 02111-1307, USA.
+#include <linux/export.h>
+
+        .set noreorder
+        .set noat
+
+	.text
+
+	.globl __udiv_qrnnd
+	.ent __udiv_qrnnd
+__udiv_qrnnd:
+	.frame $30,0,$26,0
+	.prologue 0
+
+#define cnt	$2
+#define tmp	$3
+#define rem_ptr	$16
+#define n1	$17
+#define n0	$18
+#define d	$19
+#define qb	$20
+#define AT	$at
+
+	ldiq	cnt,16
+	blt	d,$largedivisor
+
+$loop1:	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	d,n1,qb
+	subq	n1,d,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	subq	cnt,1,cnt
+	bgt	cnt,$loop1
+	stq	n1,0(rem_ptr)
+	bis	$31,n0,$0
+	ret	$31,($26),1
+
+$largedivisor:
+	and	n0,1,$4
+
+	srl	n0,1,n0
+	sll	n1,63,tmp
+	or	tmp,n0,n0
+	srl	n1,1,n1
+
+	and	d,1,$6
+	srl	d,1,$5
+	addq	$5,$6,$5
+
+$loop2:	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	cmplt	n0,0,tmp
+	addq	n1,n1,n1
+	bis	n1,tmp,n1
+	addq	n0,n0,n0
+	cmpule	$5,n1,qb
+	subq	n1,$5,tmp
+	cmovne	qb,tmp,n1
+	bis	n0,qb,n0
+	subq	cnt,1,cnt
+	bgt	cnt,$loop2
+
+	addq	n1,n1,n1
+	addq	$4,n1,n1
+	bne	$6,$Odd
+	stq	n1,0(rem_ptr)
+	bis	$31,n0,$0
+	ret	$31,($26),1
+
+$Odd:
+	/* q' in n0. r' in n1 */
+	addq	n1,n0,n1
+
+	cmpult	n1,n0,tmp	# tmp := carry from addq
+	subq	n1,d,AT
+	addq	n0,tmp,n0
+	cmovne	tmp,AT,n1
+
+	cmpult	n1,d,tmp
+	addq	n0,1,AT
+	cmoveq	tmp,AT,n0
+	subq	n1,d,AT
+	cmoveq	tmp,AT,n1
+
+	stq	n1,0(rem_ptr)
+	bis	$31,n0,$0
+	ret	$31,($26),1
+
+	.end	__udiv_qrnnd
+EXPORT_SYMBOL(__udiv_qrnnd)
diff --git a/arch/alpha/math-emu/Makefile b/arch/alpha/math-emu/Makefile
index 6eda0973e183..3206402a8792 100644
--- a/arch/alpha/math-emu/Makefile
+++ b/arch/alpha/math-emu/Makefile
@@ -7,4 +7,4 @@ ccflags-y := -w
 
 obj-$(CONFIG_MATHEMU) += math-emu.o
 
-math-emu-objs := math.o qrnnd.o
+math-emu-objs := math.o
diff --git a/arch/alpha/math-emu/math.c b/arch/alpha/math-emu/math.c
index d568cd9a3e43..68d420bfd3c0 100644
--- a/arch/alpha/math-emu/math.c
+++ b/arch/alpha/math-emu/math.c
@@ -4,6 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <asm/ptrace.h>
+#include <asm/fpu.h>
 
 #include <linux/uaccess.h>
 
@@ -45,12 +46,6 @@
 #define MISC_TRAPB	0x0000
 #define MISC_EXCB	0x0400
 
-extern unsigned long alpha_read_fp_reg (unsigned long reg);
-extern void alpha_write_fp_reg (unsigned long reg, unsigned long val);
-extern unsigned long alpha_read_fp_reg_s (unsigned long reg);
-extern void alpha_write_fp_reg_s (unsigned long reg, unsigned long val);
-
-
 #ifdef MODULE
 
 MODULE_DESCRIPTION("FP Software completion module");
@@ -65,7 +60,7 @@ static long (*save_emul) (unsigned long pc);
 long do_alpha_fp_emul_imprecise(struct pt_regs *, unsigned long);
 long do_alpha_fp_emul(unsigned long);
 
-int init_module(void)
+static int alpha_fp_emul_init_module(void)
 {
 	save_emul_imprecise = alpha_fp_emul_imprecise;
 	save_emul = alpha_fp_emul;
@@ -73,12 +68,14 @@ int init_module(void)
 	alpha_fp_emul = do_alpha_fp_emul;
 	return 0;
 }
+module_init(alpha_fp_emul_init_module);
 
-void cleanup_module(void)
+static void alpha_fp_emul_cleanup_module(void)
 {
 	alpha_fp_emul_imprecise = save_emul_imprecise;
 	alpha_fp_emul = save_emul;
 }
+module_exit(alpha_fp_emul_cleanup_module);
 
 #undef  alpha_fp_emul_imprecise
 #define alpha_fp_emul_imprecise		do_alpha_fp_emul_imprecise
diff --git a/arch/alpha/math-emu/qrnnd.S b/arch/alpha/math-emu/qrnnd.S
deleted file mode 100644
index d6373ec1bff9..000000000000
--- a/arch/alpha/math-emu/qrnnd.S
+++ /dev/null
@@ -1,163 +0,0 @@
- # Alpha 21064 __udiv_qrnnd
- # Copyright (C) 1992, 1994, 1995, 2000 Free Software Foundation, Inc.
-
- # This file is part of GCC.
-
- # The GNU MP Library is free software; you can redistribute it and/or modify
- # it under the terms of the GNU General Public License as published by
- # the Free Software Foundation; either version 2 of the License, or (at your
- # option) any later version.
-
- # In addition to the permissions in the GNU General Public License, the
- # Free Software Foundation gives you unlimited permission to link the
- # compiled version of this file with other programs, and to distribute
- # those programs without any restriction coming from the use of this
- # file.  (The General Public License restrictions do apply in other
- # respects; for example, they cover modification of the file, and
- # distribution when not linked into another program.)
-
- # This file is distributed in the hope that it will be useful, but
- # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Library General Public
- # License for more details.
-
- # You should have received a copy of the GNU General Public License
- # along with GCC; see the file COPYING.  If not, write to the 
- # Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- # MA 02111-1307, USA.
-
-        .set noreorder
-        .set noat
-
-	.text
-
-	.globl __udiv_qrnnd
-	.ent __udiv_qrnnd
-__udiv_qrnnd:
-	.frame $30,0,$26,0
-	.prologue 0
-
-#define cnt	$2
-#define tmp	$3
-#define rem_ptr	$16
-#define n1	$17
-#define n0	$18
-#define d	$19
-#define qb	$20
-#define AT	$at
-
-	ldiq	cnt,16
-	blt	d,$largedivisor
-
-$loop1:	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	d,n1,qb
-	subq	n1,d,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	subq	cnt,1,cnt
-	bgt	cnt,$loop1
-	stq	n1,0(rem_ptr)
-	bis	$31,n0,$0
-	ret	$31,($26),1
-
-$largedivisor:
-	and	n0,1,$4
-
-	srl	n0,1,n0
-	sll	n1,63,tmp
-	or	tmp,n0,n0
-	srl	n1,1,n1
-
-	and	d,1,$6
-	srl	d,1,$5
-	addq	$5,$6,$5
-
-$loop2:	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	cmplt	n0,0,tmp
-	addq	n1,n1,n1
-	bis	n1,tmp,n1
-	addq	n0,n0,n0
-	cmpule	$5,n1,qb
-	subq	n1,$5,tmp
-	cmovne	qb,tmp,n1
-	bis	n0,qb,n0
-	subq	cnt,1,cnt
-	bgt	cnt,$loop2
-
-	addq	n1,n1,n1
-	addq	$4,n1,n1
-	bne	$6,$Odd
-	stq	n1,0(rem_ptr)
-	bis	$31,n0,$0
-	ret	$31,($26),1
-
-$Odd:
-	/* q' in n0. r' in n1 */
-	addq	n1,n0,n1
-
-	cmpult	n1,n0,tmp	# tmp := carry from addq
-	subq	n1,d,AT
-	addq	n0,tmp,n0
-	cmovne	tmp,AT,n1
-
-	cmpult	n1,d,tmp
-	addq	n0,1,AT
-	cmoveq	tmp,AT,n0
-	subq	n1,d,AT
-	cmoveq	tmp,AT,n1
-
-	stq	n1,0(rem_ptr)
-	bis	$31,n0,$0
-	ret	$31,($26),1
-
-	.end	__udiv_qrnnd
diff --git a/arch/alpha/mm/Makefile b/arch/alpha/mm/Makefile
index 08ac6612edad..101dbd06b4ce 100644
--- a/arch/alpha/mm/Makefile
+++ b/arch/alpha/mm/Makefile
@@ -3,8 +3,4 @@
 # Makefile for the linux alpha-specific parts of the memory manager.
 #
 
-ccflags-y := -Werror
-
 obj-y	:= init.o fault.o
-
-obj-$(CONFIG_DISCONTIGMEM) += numa.o
diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c
index 741e61ef9d3f..a9816bbc9f34 100644
--- a/arch/alpha/mm/fault.c
+++ b/arch/alpha/mm/fault.c
@@ -25,6 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/extable.h>
 #include <linux/uaccess.h>
+#include <linux/perf_event.h>
 
 extern void die_if_kernel(char *,struct pt_regs *,long, unsigned long *);
 
@@ -77,8 +78,8 @@ __load_new_mm_context(struct mm_struct *next_mm)
 
 /* Macro for exception fixup code to access integer registers.  */
 #define dpf_reg(r)							\
-	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-16 :	\
-				 (r) <= 18 ? (r)+10 : (r)-10])
+	(((unsigned long *)regs)[(r) <= 8 ? (r) : (r) <= 15 ? (r)-17 :	\
+				 (r) <= 18 ? (r)+11 : (r)-10])
 
 asmlinkage void
 do_page_fault(unsigned long address, unsigned long mmcsr,
@@ -89,7 +90,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	const struct exception_table_entry *fixup;
 	int si_code = SEGV_MAPERR;
 	vm_fault_t fault;
-	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
+	unsigned int flags = FAULT_FLAG_DEFAULT;
 
 	/* As of EV6, a load into $31/$f31 is a prefetch, and never faults
 	   (or is suppressed by the PALcode).  Support that for older CPUs
@@ -116,21 +117,14 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 #endif
 	if (user_mode(regs))
 		flags |= FAULT_FLAG_USER;
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (expand_stack(vma, address))
-		goto bad_area;
+		goto bad_area_nosemaphore;
 
 	/* Ok, we have a good vm_area for this memory access, so
 	   we can handle it.  */
- good_area:
 	si_code = SEGV_ACCERR;
 	if (cause < 0) {
 		if (!(vma->vm_flags & VM_EXEC))
@@ -148,9 +142,16 @@ retry:
 	/* If for any reason at all we couldn't handle the fault,
 	   make sure we exit gracefully rather than endlessly redo
 	   the fault.  */
-	fault = handle_mm_fault(vma, address, flags);
+	fault = handle_mm_fault(vma, address, flags, regs);
 
-	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
+		return;
+	}
+
+	/* The fault is fully completed (including releasing mmap lock) */
+	if (fault & VM_FAULT_COMPLETED)
 		return;
 
 	if (unlikely(fault & VM_FAULT_ERROR)) {
@@ -163,32 +164,27 @@ retry:
 		BUG();
 	}
 
-	if (flags & FAULT_FLAG_ALLOW_RETRY) {
-		if (fault & VM_FAULT_MAJOR)
-			current->maj_flt++;
-		else
-			current->min_flt++;
-		if (fault & VM_FAULT_RETRY) {
-			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+	if (fault & VM_FAULT_RETRY) {
+		flags |= FAULT_FLAG_TRIED;
 
-			 /* No need to up_read(&mm->mmap_sem) as we would
-			 * have already released it in __lock_page_or_retry
-			 * in mm/filemap.c.
-			 */
+		/* No need to mmap_read_unlock(mm) as we would
+		 * have already released it in __lock_page_or_retry
+		 * in mm/filemap.c.
+		 */
 
-			goto retry;
-		}
+		goto retry;
 	}
 
-	up_read(&mm->mmap_sem);
+	mmap_read_unlock(mm);
 
 	return;
 
 	/* Something tried to access memory that isn't in our memory map.
 	   Fix it, but check if it's kernel or user first.  */
  bad_area:
-	up_read(&mm->mmap_sem);
+	mmap_read_unlock(mm);
 
+ bad_area_nosemaphore:
 	if (user_mode(regs))
 		goto do_sigsegv;
 
@@ -206,28 +202,28 @@ retry:
 	printk(KERN_ALERT "Unable to handle kernel paging request at "
 	       "virtual address %016lx\n", address);
 	die_if_kernel("Oops", regs, cause, (unsigned long*)regs - 16);
-	do_exit(SIGKILL);
+	make_task_dead(SIGKILL);
 
 	/* We ran out of memory, or some other thing happened to us that
 	   made us unable to handle the page fault gracefully.  */
  out_of_memory:
-	up_read(&mm->mmap_sem);
+	mmap_read_unlock(mm);
 	if (!user_mode(regs))
 		goto no_context;
 	pagefault_out_of_memory();
 	return;
 
  do_sigbus:
-	up_read(&mm->mmap_sem);
+	mmap_read_unlock(mm);
 	/* Send a sigbus, regardless of whether we were in kernel
 	   or user mode.  */
-	force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *) address, 0);
+	force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *) address);
 	if (!user_mode(regs))
 		goto no_context;
 	return;
 
  do_sigsegv:
-	force_sig_fault(SIGSEGV, si_code, (void __user *) address, 0);
+	force_sig_fault(SIGSEGV, si_code, (void __user *) address);
 	return;
 
 #ifdef CONFIG_ALPHA_LARGE_VMALLOC
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index e2cbec3789e8..4c5ab9cd8a0a 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -24,7 +24,6 @@
 #include <linux/gfp.h>
 
 #include <linux/uaccess.h>
-#include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/hwrpb.h>
 #include <asm/dma.h>
@@ -34,7 +33,7 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 
-extern void die_if_kernel(char *,struct pt_regs *,long);
+#include "../kernel/proto.h"
 
 static struct pcb_struct original_pcb;
 
@@ -43,7 +42,7 @@ pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *ret, *init;
 
-	ret = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+	ret = __pgd_alloc(mm, 0);
 	init = pgd_offset(&init_mm, 0UL);
 	if (ret) {
 #ifdef CONFIG_ALPHA_LARGE_VMALLOC
@@ -61,33 +60,6 @@ pgd_alloc(struct mm_struct *mm)
 }
 
 
-/*
- * BAD_PAGE is the page that is used for page faults when linux
- * is out-of-memory. Older versions of linux just did a
- * do_exit(), but using this instead means there is less risk
- * for a process dying in kernel mode, possibly leaving an inode
- * unused etc..
- *
- * BAD_PAGETABLE is the accompanying page-table: it is initialized
- * to point to BAD_PAGE entries.
- *
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-pmd_t *
-__bad_pagetable(void)
-{
-	memset((void *) EMPTY_PGT, 0, PAGE_SIZE);
-	return (pmd_t *) EMPTY_PGT;
-}
-
-pte_t
-__bad_page(void)
-{
-	memset((void *) EMPTY_PGE, 0, PAGE_SIZE);
-	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
-}
-
 static inline unsigned long
 load_PCB(struct pcb_struct *pcb)
 {
@@ -146,6 +118,8 @@ callback_init(void * kernel_end)
 {
 	struct crb_struct * crb;
 	pgd_t *pgd;
+	p4d_t *p4d;
+	pud_t *pud;
 	pmd_t *pmd;
 	void *two_pages;
 
@@ -184,8 +158,10 @@ callback_init(void * kernel_end)
 	memset(two_pages, 0, 2*PAGE_SIZE);
 
 	pgd = pgd_offset_k(VMALLOC_START);
-	pgd_set(pgd, (pmd_t *)two_pages);
-	pmd = pmd_offset(pgd, VMALLOC_START);
+	p4d = p4d_offset(pgd, VMALLOC_START);
+	pud = pud_offset(p4d, VMALLOC_START);
+	pud_set(pud, (pmd_t *)two_pages);
+	pmd = pmd_offset(pud, VMALLOC_START);
 	pmd_set(pmd, (pte_t *)(two_pages + PAGE_SIZE));
 
 	if (alpha_using_srm) {
@@ -214,9 +190,9 @@ callback_init(void * kernel_end)
 				/* Newer consoles (especially on larger
 				   systems) may require more pages of
 				   PTEs. Grab additional pages as needed. */
-				if (pmd != pmd_offset(pgd, vaddr)) {
+				if (pmd != pmd_offset(pud, vaddr)) {
 					memset(kernel_end, 0, PAGE_SIZE);
-					pmd = pmd_offset(pgd, vaddr);
+					pmd = pmd_offset(pud, vaddr);
 					pmd_set(pmd, (pte_t *)kernel_end);
 					kernel_end += PAGE_SIZE;
 				}
@@ -232,33 +208,26 @@ callback_init(void * kernel_end)
 	return kernel_end;
 }
 
-
-#ifndef CONFIG_DISCONTIGMEM
 /*
  * paging_init() sets up the memory map.
  */
 void __init paging_init(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES] = {0, };
-	unsigned long dma_pfn, high_pfn;
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = {0, };
+	unsigned long dma_pfn;
 
 	dma_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-	high_pfn = max_pfn = max_low_pfn;
+	max_pfn = max_low_pfn;
 
-	if (dma_pfn >= high_pfn)
-		zones_size[ZONE_DMA] = high_pfn;
-	else {
-		zones_size[ZONE_DMA] = dma_pfn;
-		zones_size[ZONE_NORMAL] = high_pfn - dma_pfn;
-	}
+	max_zone_pfn[ZONE_DMA] = dma_pfn;
+	max_zone_pfn[ZONE_NORMAL] = max_pfn;
 
 	/* Initialize mem_map[].  */
-	free_area_init(zones_size);
+	free_area_init(max_zone_pfn);
 
 	/* Initialize the kernel's ZERO_PGE. */
-	memset((void *)ZERO_PGE, 0, PAGE_SIZE);
+	memset(absolute_pointer(ZERO_PGE), 0, PAGE_SIZE);
 }
-#endif /* CONFIG_DISCONTIGMEM */
 
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
 void
@@ -277,11 +246,24 @@ srm_paging_stop (void)
 }
 #endif
 
-void __init
-mem_init(void)
-{
-	set_max_mapnr(max_low_pfn);
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
-	memblock_free_all();
-	mem_init_print_info(NULL);
-}
+static const pgprot_t protection_map[16] = {
+	[VM_NONE]					= _PAGE_P(_PAGE_FOE | _PAGE_FOW |
+								  _PAGE_FOR),
+	[VM_READ]					= _PAGE_P(_PAGE_FOE | _PAGE_FOW),
+	[VM_WRITE]					= _PAGE_P(_PAGE_FOE),
+	[VM_WRITE | VM_READ]				= _PAGE_P(_PAGE_FOE),
+	[VM_EXEC]					= _PAGE_P(_PAGE_FOW | _PAGE_FOR),
+	[VM_EXEC | VM_READ]				= _PAGE_P(_PAGE_FOW),
+	[VM_EXEC | VM_WRITE]				= _PAGE_P(0),
+	[VM_EXEC | VM_WRITE | VM_READ]			= _PAGE_P(0),
+	[VM_SHARED]					= _PAGE_S(_PAGE_FOE | _PAGE_FOW |
+								  _PAGE_FOR),
+	[VM_SHARED | VM_READ]				= _PAGE_S(_PAGE_FOE | _PAGE_FOW),
+	[VM_SHARED | VM_WRITE]				= _PAGE_S(_PAGE_FOE),
+	[VM_SHARED | VM_WRITE | VM_READ]		= _PAGE_S(_PAGE_FOE),
+	[VM_SHARED | VM_EXEC]				= _PAGE_S(_PAGE_FOW | _PAGE_FOR),
+	[VM_SHARED | VM_EXEC | VM_READ]			= _PAGE_S(_PAGE_FOW),
+	[VM_SHARED | VM_EXEC | VM_WRITE]		= _PAGE_S(0),
+	[VM_SHARED | VM_EXEC | VM_WRITE | VM_READ]	= _PAGE_S(0)
+};
+DECLARE_VM_GET_PAGE_PROT
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
deleted file mode 100644
index d0b73371e985..000000000000
--- a/arch/alpha/mm/numa.c
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *  linux/arch/alpha/mm/numa.c
- *
- *  DISCONTIGMEM NUMA alpha support.
- *
- *  Copyright (C) 2001 Andrea Arcangeli <andrea@suse.de> SuSE
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/memblock.h>
-#include <linux/swap.h>
-#include <linux/initrd.h>
-#include <linux/pfn.h>
-#include <linux/module.h>
-
-#include <asm/hwrpb.h>
-#include <asm/pgalloc.h>
-#include <asm/sections.h>
-
-pg_data_t node_data[MAX_NUMNODES];
-EXPORT_SYMBOL(node_data);
-
-#undef DEBUG_DISCONTIG
-#ifdef DEBUG_DISCONTIG
-#define DBGDCONT(args...) printk(args)
-#else
-#define DBGDCONT(args...)
-#endif
-
-#define for_each_mem_cluster(memdesc, _cluster, i)		\
-	for ((_cluster) = (memdesc)->cluster, (i) = 0;		\
-	     (i) < (memdesc)->numclusters; (i)++, (_cluster)++)
-
-static void __init show_mem_layout(void)
-{
-	struct memclust_struct * cluster;
-	struct memdesc_struct * memdesc;
-	int i;
-
-	/* Find free clusters, and init and free the bootmem accordingly.  */
-	memdesc = (struct memdesc_struct *)
-	  (hwrpb->mddt_offset + (unsigned long) hwrpb);
-
-	printk("Raw memory layout:\n");
-	for_each_mem_cluster(memdesc, cluster, i) {
-		printk(" memcluster %2d, usage %1lx, start %8lu, end %8lu\n",
-		       i, cluster->usage, cluster->start_pfn,
-		       cluster->start_pfn + cluster->numpages);
-	}
-}
-
-static void __init
-setup_memory_node(int nid, void *kernel_end)
-{
-	extern unsigned long mem_size_limit;
-	struct memclust_struct * cluster;
-	struct memdesc_struct * memdesc;
-	unsigned long start_kernel_pfn, end_kernel_pfn;
-	unsigned long start, end;
-	unsigned long node_pfn_start, node_pfn_end;
-	unsigned long node_min_pfn, node_max_pfn;
-	int i;
-	int show_init = 0;
-
-	/* Find the bounds of current node */
-	node_pfn_start = (node_mem_start(nid)) >> PAGE_SHIFT;
-	node_pfn_end = node_pfn_start + (node_mem_size(nid) >> PAGE_SHIFT);
-	
-	/* Find free clusters, and init and free the bootmem accordingly.  */
-	memdesc = (struct memdesc_struct *)
-	  (hwrpb->mddt_offset + (unsigned long) hwrpb);
-
-	/* find the bounds of this node (node_min_pfn/node_max_pfn) */
-	node_min_pfn = ~0UL;
-	node_max_pfn = 0UL;
-	for_each_mem_cluster(memdesc, cluster, i) {
-		/* Bit 0 is console/PALcode reserved.  Bit 1 is
-		   non-volatile memory -- we might want to mark
-		   this for later.  */
-		if (cluster->usage & 3)
-			continue;
-
-		start = cluster->start_pfn;
-		end = start + cluster->numpages;
-
-		if (start >= node_pfn_end || end <= node_pfn_start)
-			continue;
-
-		if (!show_init) {
-			show_init = 1;
-			printk("Initializing bootmem allocator on Node ID %d\n", nid);
-		}
-		printk(" memcluster %2d, usage %1lx, start %8lu, end %8lu\n",
-		       i, cluster->usage, cluster->start_pfn,
-		       cluster->start_pfn + cluster->numpages);
-
-		if (start < node_pfn_start)
-			start = node_pfn_start;
-		if (end > node_pfn_end)
-			end = node_pfn_end;
-
-		if (start < node_min_pfn)
-			node_min_pfn = start;
-		if (end > node_max_pfn)
-			node_max_pfn = end;
-	}
-
-	if (mem_size_limit && node_max_pfn > mem_size_limit) {
-		static int msg_shown = 0;
-		if (!msg_shown) {
-			msg_shown = 1;
-			printk("setup: forcing memory size to %ldK (from %ldK).\n",
-			       mem_size_limit << (PAGE_SHIFT - 10),
-			       node_max_pfn    << (PAGE_SHIFT - 10));
-		}
-		node_max_pfn = mem_size_limit;
-	}
-
-	if (node_min_pfn >= node_max_pfn)
-		return;
-
-	/* Update global {min,max}_low_pfn from node information. */
-	if (node_min_pfn < min_low_pfn)
-		min_low_pfn = node_min_pfn;
-	if (node_max_pfn > max_low_pfn)
-		max_pfn = max_low_pfn = node_max_pfn;
-
-#if 0 /* we'll try this one again in a little while */
-	/* Cute trick to make sure our local node data is on local memory */
-	node_data[nid] = (pg_data_t *)(__va(node_min_pfn << PAGE_SHIFT));
-#endif
-	printk(" Detected node memory:   start %8lu, end %8lu\n",
-	       node_min_pfn, node_max_pfn);
-
-	DBGDCONT(" DISCONTIG: node_data[%d]   is at 0x%p\n", nid, NODE_DATA(nid));
-
-	/* Find the bounds of kernel memory.  */
-	start_kernel_pfn = PFN_DOWN(KERNEL_START_PHYS);
-	end_kernel_pfn = PFN_UP(virt_to_phys(kernel_end));
-
-	if (!nid && (node_max_pfn < end_kernel_pfn || node_min_pfn > start_kernel_pfn))
-		panic("kernel loaded out of ram");
-
-	memblock_add(PFN_PHYS(node_min_pfn),
-		     (node_max_pfn - node_min_pfn) << PAGE_SHIFT);
-
-	/* Zone start phys-addr must be 2^(MAX_ORDER-1) aligned.
-	   Note that we round this down, not up - node memory
-	   has much larger alignment than 8Mb, so it's safe. */
-	node_min_pfn &= ~((1UL << (MAX_ORDER-1))-1);
-
-	NODE_DATA(nid)->node_start_pfn = node_min_pfn;
-	NODE_DATA(nid)->node_present_pages = node_max_pfn - node_min_pfn;
-
-	node_set_online(nid);
-}
-
-void __init
-setup_memory(void *kernel_end)
-{
-	unsigned long kernel_size;
-	int nid;
-
-	show_mem_layout();
-
-	nodes_clear(node_online_map);
-
-	min_low_pfn = ~0UL;
-	max_low_pfn = 0UL;
-	for (nid = 0; nid < MAX_NUMNODES; nid++)
-		setup_memory_node(nid, kernel_end);
-
-	kernel_size = virt_to_phys(kernel_end) - KERNEL_START_PHYS;
-	memblock_reserve(KERNEL_START_PHYS, kernel_size);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	initrd_start = INITRD_START;
-	if (initrd_start) {
-		extern void *move_initrd(unsigned long);
-
-		initrd_end = initrd_start+INITRD_SIZE;
-		printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
-		       (void *) initrd_start, INITRD_SIZE);
-
-		if ((void *)initrd_end > phys_to_virt(PFN_PHYS(max_low_pfn))) {
-			if (!move_initrd(PFN_PHYS(max_low_pfn)))
-				printk("initrd extends beyond end of memory "
-				       "(0x%08lx > 0x%p)\ndisabling initrd\n",
-				       initrd_end,
-				       phys_to_virt(PFN_PHYS(max_low_pfn)));
-		} else {
-			nid = kvaddr_to_nid(initrd_start);
-			memblock_reserve(virt_to_phys((void *)initrd_start),
-					 INITRD_SIZE);
-		}
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-}
-
-void __init paging_init(void)
-{
-	unsigned int    nid;
-	unsigned long   zones_size[MAX_NR_ZONES] = {0, };
-	unsigned long	dma_local_pfn;
-
-	/*
-	 * The old global MAX_DMA_ADDRESS per-arch API doesn't fit
-	 * in the NUMA model, for now we convert it to a pfn and
-	 * we interpret this pfn as a local per-node information.
-	 * This issue isn't very important since none of these machines
-	 * have legacy ISA slots anyways.
-	 */
-	dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-
-	for_each_online_node(nid) {
-		unsigned long start_pfn = NODE_DATA(nid)->node_start_pfn;
-		unsigned long end_pfn = start_pfn + NODE_DATA(nid)->node_present_pages;
-
-		if (dma_local_pfn >= end_pfn - start_pfn)
-			zones_size[ZONE_DMA] = end_pfn - start_pfn;
-		else {
-			zones_size[ZONE_DMA] = dma_local_pfn;
-			zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn;
-		}
-		node_set_state(nid, N_NORMAL_MEMORY);
-		free_area_init_node(nid, zones_size, start_pfn, NULL);
-	}
-
-	/* Initialize the kernel's ZERO_PGE. */
-	memset((void *)ZERO_PGE, 0, PAGE_SIZE);
-}
diff --git a/arch/alpha/oprofile/Makefile b/arch/alpha/oprofile/Makefile
deleted file mode 100644
index 79f32820a42f..000000000000
--- a/arch/alpha/oprofile/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-ccflags-y := -Werror -Wno-sign-compare
-
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y				:= $(DRIVER_OBJS) common.o
-oprofile-$(CONFIG_ALPHA_GENERIC)	+= op_model_ev4.o \
-					   op_model_ev5.o \
-					   op_model_ev6.o \
-					   op_model_ev67.o
-oprofile-$(CONFIG_ALPHA_EV4)		+= op_model_ev4.o
-oprofile-$(CONFIG_ALPHA_EV5)		+= op_model_ev5.o
-oprofile-$(CONFIG_ALPHA_EV6)		+= op_model_ev6.o \
-					   op_model_ev67.o
diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c
deleted file mode 100644
index 1b1259c7d7d1..000000000000
--- a/arch/alpha/oprofile/common.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/**
- * @file arch/alpha/oprofile/common.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/special_insns.h>
-
-#include "op_impl.h"
-
-extern struct op_axp_model op_model_ev4 __attribute__((weak));
-extern struct op_axp_model op_model_ev5 __attribute__((weak));
-extern struct op_axp_model op_model_pca56 __attribute__((weak));
-extern struct op_axp_model op_model_ev6 __attribute__((weak));
-extern struct op_axp_model op_model_ev67 __attribute__((weak));
-
-static struct op_axp_model *model;
-
-extern void (*perf_irq)(unsigned long, struct pt_regs *);
-static void (*save_perf_irq)(unsigned long, struct pt_regs *);
-
-static struct op_counter_config ctr[20];
-static struct op_system_config sys;
-static struct op_register_config reg;
-
-/* Called from do_entInt to handle the performance monitor interrupt.  */
-
-static void
-op_handle_interrupt(unsigned long which, struct pt_regs *regs)
-{
-	model->handle_interrupt(which, regs, ctr);
-
-	/* If the user has selected an interrupt frequency that is
-	   not exactly the width of the counter, write a new value
-	   into the counter such that it'll overflow after N more
-	   events.  */
-	if ((reg.need_reset >> which) & 1)
-		model->reset_ctr(&reg, which);
-}
- 
-static int
-op_axp_setup(void)
-{
-	unsigned long i, e;
-
-	/* Install our interrupt handler into the existing hook.  */
-	save_perf_irq = perf_irq;
-	perf_irq = op_handle_interrupt;
-
-	/* Compute the mask of enabled counters.  */
-	for (i = e = 0; i < model->num_counters; ++i)
-		if (ctr[i].enabled)
-			e |= 1 << i;
-	reg.enable = e;
-
-	/* Pre-compute the values to stuff in the hardware registers.  */
-	model->reg_setup(&reg, ctr, &sys);
-
-	/* Configure the registers on all cpus.  */
-	smp_call_function(model->cpu_setup, &reg, 1);
-	model->cpu_setup(&reg);
-	return 0;
-}
-
-static void
-op_axp_shutdown(void)
-{
-	/* Remove our interrupt handler.  We may be removing this module.  */
-	perf_irq = save_perf_irq;
-}
-
-static void
-op_axp_cpu_start(void *dummy)
-{
-	wrperfmon(1, reg.enable);
-}
-
-static int
-op_axp_start(void)
-{
-	smp_call_function(op_axp_cpu_start, NULL, 1);
-	op_axp_cpu_start(NULL);
-	return 0;
-}
-
-static inline void
-op_axp_cpu_stop(void *dummy)
-{
-	/* Disable performance monitoring for all counters.  */
-	wrperfmon(0, -1);
-}
-
-static void
-op_axp_stop(void)
-{
-	smp_call_function(op_axp_cpu_stop, NULL, 1);
-	op_axp_cpu_stop(NULL);
-}
-
-static int
-op_axp_create_files(struct dentry *root)
-{
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		struct dentry *dir;
-		char buf[4];
-
-		snprintf(buf, sizeof buf, "%d", i);
-		dir = oprofilefs_mkdir(root, buf);
-
-		oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled);
-                oprofilefs_create_ulong(dir, "event", &ctr[i].event);
-		oprofilefs_create_ulong(dir, "count", &ctr[i].count);
-		/* Dummies.  */
-		oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel);
-		oprofilefs_create_ulong(dir, "user", &ctr[i].user);
-		oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask);
-	}
-
-	if (model->can_set_proc_mode) {
-		oprofilefs_create_ulong(root, "enable_pal",
-					&sys.enable_pal);
-		oprofilefs_create_ulong(root, "enable_kernel",
-					&sys.enable_kernel);
-		oprofilefs_create_ulong(root, "enable_user",
-					&sys.enable_user);
-	}
-
-	return 0;
-}
-
-int __init
-oprofile_arch_init(struct oprofile_operations *ops)
-{
-	struct op_axp_model *lmodel = NULL;
-
-	switch (implver()) {
-	case IMPLVER_EV4:
-		lmodel = &op_model_ev4;
-		break;
-	case IMPLVER_EV5:
-		/* 21164PC has a slightly different set of events.
-		   Recognize the chip by the presence of the MAX insns.  */
-		if (!amask(AMASK_MAX))
-			lmodel = &op_model_pca56;
-		else
-			lmodel = &op_model_ev5;
-		break;
-	case IMPLVER_EV6:
-		/* 21264A supports ProfileMe.
-		   Recognize the chip by the presence of the CIX insns.  */
-		if (!amask(AMASK_CIX))
-			lmodel = &op_model_ev67;
-		else
-			lmodel = &op_model_ev6;
-		break;
-	}
-
-	if (!lmodel)
-		return -ENODEV;
-	model = lmodel;
-
-	ops->create_files = op_axp_create_files;
-	ops->setup = op_axp_setup;
-	ops->shutdown = op_axp_shutdown;
-	ops->start = op_axp_start;
-	ops->stop = op_axp_stop;
-	ops->cpu_type = lmodel->cpu_type;
-
-	printk(KERN_INFO "oprofile: using %s performance monitoring.\n",
-	       lmodel->cpu_type);
-
-	return 0;
-}
-
-
-void
-oprofile_arch_exit(void)
-{
-}
diff --git a/arch/alpha/oprofile/op_impl.h b/arch/alpha/oprofile/op_impl.h
deleted file mode 100644
index b2b87ae9a353..000000000000
--- a/arch/alpha/oprofile/op_impl.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_impl.h
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#ifndef OP_IMPL_H
-#define OP_IMPL_H 1
-
-/* Per-counter configuration as set via oprofilefs.  */
-struct op_counter_config {
-	unsigned long enabled;
-	unsigned long event;
-	unsigned long count;
-	/* Dummies because I am too lazy to hack the userspace tools.  */
-	unsigned long kernel;
-	unsigned long user;
-	unsigned long unit_mask;
-};
-
-/* System-wide configuration as set via oprofilefs.  */
-struct op_system_config {
-	unsigned long enable_pal;
-	unsigned long enable_kernel;
-	unsigned long enable_user;
-};
-
-/* Cached values for the various performance monitoring registers.  */
-struct op_register_config {
-	unsigned long enable;
-	unsigned long mux_select;
-	unsigned long proc_mode;
-	unsigned long freq;
-	unsigned long reset_values;
-	unsigned long need_reset;
-};
-
-/* Per-architecture configuration and hooks.  */
-struct op_axp_model {
-	void (*reg_setup) (struct op_register_config *,
-			   struct op_counter_config *,
-			   struct op_system_config *);
-	void (*cpu_setup) (void *);
-	void (*reset_ctr) (struct op_register_config *, unsigned long);
-	void (*handle_interrupt) (unsigned long, struct pt_regs *,
-				  struct op_counter_config *);
-	char *cpu_type;
-	unsigned char num_counters;
-	unsigned char can_set_proc_mode;
-};
-
-#endif
diff --git a/arch/alpha/oprofile/op_model_ev4.c b/arch/alpha/oprofile/op_model_ev4.c
deleted file mode 100644
index 086a0d5445c5..000000000000
--- a/arch/alpha/oprofile/op_model_ev4.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev4.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.  */
-
-static void
-ev4_reg_setup(struct op_register_config *reg,
-	      struct op_counter_config *ctr,
-	      struct op_system_config *sys)
-{
-	unsigned long ctl = 0, count, hilo;
-
-	/* Select desired events.  We've mapped the event numbers
-	   such that they fit directly into the event selection fields.
-
-	   Note that there is no "off" setting.  In both cases we select
-	   the EXTERNAL event source, hoping that it'll be the lowest
-	   frequency, and set the frequency counter to LOW.  The interrupts
-	   for these "disabled" counter overflows are ignored by the
-	   interrupt handler.
-
-	   This is most irritating, because the hardware *can* enable and
-	   disable the interrupts for these counters independently, but the
-	   wrperfmon interface doesn't allow it.  */
-
-	ctl |= (ctr[0].enabled ? ctr[0].event << 8 : 14 << 8);
-	ctl |= (ctr[1].enabled ? (ctr[1].event - 16) << 32 : 7ul << 32);
-
-	/* EV4 can not read or write its counter registers.  The only
-	   thing one can do at all is see if you overflow and get an
-	   interrupt.  We can set the width of the counters, to some
-	   extent.  Take the interrupt count selected by the user,
-	   map it onto one of the possible values, and write it back.  */
-
-	count = ctr[0].count;
-	if (count <= 4096)
-		count = 4096, hilo = 1;
-	else
-		count = 65536, hilo = 0;
-	ctr[0].count = count;
-	ctl |= (ctr[0].enabled && hilo) << 3;
-
-	count = ctr[1].count;
-	if (count <= 256)
-		count = 256, hilo = 1;
-	else
-		count = 4096, hilo = 0;
-	ctr[1].count = count;
-	ctl |= (ctr[1].enabled && hilo);
-
-	reg->mux_select = ctl;
-
-	/* Select performance monitoring options.  */
-	/* ??? Need to come up with some mechanism to trace only
-	   selected processes.  EV4 does not have a mechanism to
-	   select kernel or user mode only.  For now, enable always.  */
-	reg->proc_mode = 0;
-
-	/* Frequency is folded into mux_select for EV4.  */
-	reg->freq = 0;
-
-	/* See above regarding no writes.  */
-	reg->reset_values = 0;
-	reg->need_reset = 0;
-
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev4_cpu_setup(void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-}
-
-static void
-ev4_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		     struct op_counter_config *ctr)
-{
-	/* EV4 can't properly disable counters individually.
-	   Discard "disabled" events now.  */
-	if (!ctr[which].enabled)
-		return;
-
-	/* Record the sample.  */
-	oprofile_add_sample(regs, which);
-}
-
-
-struct op_axp_model op_model_ev4 = {
-	.reg_setup		= ev4_reg_setup,
-	.cpu_setup		= ev4_cpu_setup,
-	.reset_ctr		= NULL,
-	.handle_interrupt	= ev4_handle_interrupt,
-	.cpu_type		= "alpha/ev4",
-	.num_counters		= 2,
-	.can_set_proc_mode	= 0,
-};
diff --git a/arch/alpha/oprofile/op_model_ev5.c b/arch/alpha/oprofile/op_model_ev5.c
deleted file mode 100644
index c300f5ef3482..000000000000
--- a/arch/alpha/oprofile/op_model_ev5.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev5.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.
-
-   The 21164 (EV5) and 21164PC (PCA65) vary in the bit placement and
-   meaning of the "CBOX" events.  Given that we don't care about meaning
-   at this point, arrange for the difference in bit placement to be
-   handled by common code.  */
-
-static void
-common_reg_setup(struct op_register_config *reg,
-		 struct op_counter_config *ctr,
-		 struct op_system_config *sys,
-		 int cbox1_ofs, int cbox2_ofs)
-{
-	int i, ctl, reset, need_reset;
-
-	/* Select desired events.  The event numbers are selected such
-	   that they map directly into the event selection fields:
-
-		PCSEL0:	0, 1
-		PCSEL1:	24-39
-		 CBOX1: 40-47
-		PCSEL2: 48-63
-		 CBOX2: 64-71
-
-	   There are two special cases, in that CYCLES can be measured
-	   on PCSEL[02], and SCACHE_WRITE can be measured on CBOX[12].
-	   These event numbers are canonicalizes to their first appearance.  */
-
-	ctl = 0;
-	for (i = 0; i < 3; ++i) {
-		unsigned long event = ctr[i].event;
-		if (!ctr[i].enabled)
-			continue;
-
-		/* Remap the duplicate events, as described above.  */
-		if (i == 2) {
-			if (event == 0)
-				event = 12+48;
-			else if (event == 2+41)
-				event = 4+65;
-		}
-
-		/* Convert the event numbers onto mux_select bit mask.  */
-		if (event < 2)
-			ctl |= event << 31;
-		else if (event < 24)
-			/* error */;
-		else if (event < 40)
-			ctl |= (event - 24) << 4;
-		else if (event < 48)
-			ctl |= (event - 40) << cbox1_ofs | 15 << 4;
-		else if (event < 64)
-			ctl |= event - 48;
-		else if (event < 72)
-			ctl |= (event - 64) << cbox2_ofs | 15;
-	}
-	reg->mux_select = ctl;
-
-	/* Select processor mode.  */
-	/* ??? Need to come up with some mechanism to trace only selected
-	   processes.  For now select from pal, kernel and user mode.  */
-	ctl = 0;
-	ctl |= !sys->enable_pal << 9;
-	ctl |= !sys->enable_kernel << 8;
-	ctl |= !sys->enable_user << 30;
-	reg->proc_mode = ctl;
-
-	/* Select interrupt frequencies.  Take the interrupt count selected
-	   by the user, and map it onto one of the possible counter widths.
-	   If the user value is in between, compute a value to which the
-	   counter is reset at each interrupt.  */
-
-	ctl = reset = need_reset = 0;
-	for (i = 0; i < 3; ++i) {
-		unsigned long max, hilo, count = ctr[i].count;
-		if (!ctr[i].enabled)
-			continue;
-
-		if (count <= 256)
-			count = 256, hilo = 3, max = 256;
-		else {
-			max = (i == 2 ? 16384 : 65536);
-			hilo = 2;
-			if (count > max)
-				count = max;
-		}
-		ctr[i].count = count;
-
-		ctl |= hilo << (8 - i*2);
-		reset |= (max - count) << (48 - 16*i);
-		if (count != max)
-			need_reset |= 1 << i;
-	}
-	reg->freq = ctl;
-	reg->reset_values = reset;
-	reg->need_reset = need_reset;
-}
-
-static void
-ev5_reg_setup(struct op_register_config *reg,
-	      struct op_counter_config *ctr,
-	      struct op_system_config *sys)
-{
-	common_reg_setup(reg, ctr, sys, 19, 22);
-}
-
-static void
-pca56_reg_setup(struct op_register_config *reg,
-	        struct op_counter_config *ctr,
-	        struct op_system_config *sys)
-{
-	common_reg_setup(reg, ctr, sys, 8, 11);
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev5_cpu_setup (void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-	wrperfmon(4, reg->freq);
-	wrperfmon(6, reg->reset_values);
-}
-
-/* CTR is a counter for which the user has requested an interrupt count
-   in between one of the widths selectable in hardware.  Reset the count
-   for CTR to the value stored in REG->RESET_VALUES.
-
-   For EV5, this means disabling profiling, reading the current values,
-   masking in the value for the desired register, writing, then turning
-   profiling back on.
-
-   This can be streamlined if profiling is only enabled for user mode.
-   In that case we know that the counters are not currently incrementing
-   (due to being in kernel mode).  */
-
-static void
-ev5_reset_ctr(struct op_register_config *reg, unsigned long ctr)
-{
-	unsigned long values, mask, not_pk, reset_values;
-
-	mask = (ctr == 0 ? 0xfffful << 48
-	        : ctr == 1 ? 0xfffful << 32
-		: 0x3fff << 16);
-
-	not_pk = 1 << 9 | 1 << 8;
-
-	reset_values = reg->reset_values;
-
-	if ((reg->proc_mode & not_pk) == not_pk) {
-		values = wrperfmon(5, 0);
-		values = (reset_values & mask) | (values & ~mask & -2);
-		wrperfmon(6, values);
-	} else {
-		wrperfmon(0, -1);
-		values = wrperfmon(5, 0);
-		values = (reset_values & mask) | (values & ~mask & -2);
-		wrperfmon(6, values);
-		wrperfmon(1, reg->enable);
-	}
-}
-
-static void
-ev5_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		     struct op_counter_config *ctr)
-{
-	/* Record the sample.  */
-	oprofile_add_sample(regs, which);
-}
-
-
-struct op_axp_model op_model_ev5 = {
-	.reg_setup		= ev5_reg_setup,
-	.cpu_setup		= ev5_cpu_setup,
-	.reset_ctr		= ev5_reset_ctr,
-	.handle_interrupt	= ev5_handle_interrupt,
-	.cpu_type		= "alpha/ev5",
-	.num_counters		= 3,
-	.can_set_proc_mode	= 1,
-};
-
-struct op_axp_model op_model_pca56 = {
-	.reg_setup		= pca56_reg_setup,
-	.cpu_setup		= ev5_cpu_setup,
-	.reset_ctr		= ev5_reset_ctr,
-	.handle_interrupt	= ev5_handle_interrupt,
-	.cpu_type		= "alpha/pca56",
-	.num_counters		= 3,
-	.can_set_proc_mode	= 1,
-};
diff --git a/arch/alpha/oprofile/op_model_ev6.c b/arch/alpha/oprofile/op_model_ev6.c
deleted file mode 100644
index 02edf5971614..000000000000
--- a/arch/alpha/oprofile/op_model_ev6.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev6.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.  */
-
-static void
-ev6_reg_setup(struct op_register_config *reg,
-	      struct op_counter_config *ctr,
-	      struct op_system_config *sys)
-{
-	unsigned long ctl, reset, need_reset, i;
-
-	/* Select desired events.  We've mapped the event numbers
-	   such that they fit directly into the event selection fields.  */
-	ctl = 0;
-	if (ctr[0].enabled && ctr[0].event)
-		ctl |= (ctr[0].event & 1) << 4;
-	if (ctr[1].enabled)
-		ctl |= (ctr[1].event - 2) & 15;
-	reg->mux_select = ctl;
-
-	/* Select logging options.  */
-	/* ??? Need to come up with some mechanism to trace only
-	   selected processes.  EV6 does not have a mechanism to
-	   select kernel or user mode only.  For now, enable always.  */
-	reg->proc_mode = 0;
-
-	/* EV6 cannot change the width of the counters as with the
-	   other implementations.  But fortunately, we can write to
-	   the counters and set the value such that it will overflow
-	   at the right time.  */
-	reset = need_reset = 0;
-	for (i = 0; i < 2; ++i) {
-		unsigned long count = ctr[i].count;
-		if (!ctr[i].enabled)
-			continue;
-
-		if (count > 0x100000)
-			count = 0x100000;
-		ctr[i].count = count;
-		reset |= (0x100000 - count) << (i ? 6 : 28);
-		if (count != 0x100000)
-			need_reset |= 1 << i;
-	}
-	reg->reset_values = reset;
-	reg->need_reset = need_reset;
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev6_cpu_setup (void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-	wrperfmon(6, reg->reset_values | 3);
-}
-
-/* CTR is a counter for which the user has requested an interrupt count
-   in between one of the widths selectable in hardware.  Reset the count
-   for CTR to the value stored in REG->RESET_VALUES.  */
-
-static void
-ev6_reset_ctr(struct op_register_config *reg, unsigned long ctr)
-{
-	wrperfmon(6, reg->reset_values | (1 << ctr));
-}
-
-static void
-ev6_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		     struct op_counter_config *ctr)
-{
-	/* Record the sample.  */
-	oprofile_add_sample(regs, which);
-}
-
-
-struct op_axp_model op_model_ev6 = {
-	.reg_setup		= ev6_reg_setup,
-	.cpu_setup		= ev6_cpu_setup,
-	.reset_ctr		= ev6_reset_ctr,
-	.handle_interrupt	= ev6_handle_interrupt,
-	.cpu_type		= "alpha/ev6",
-	.num_counters		= 2,
-	.can_set_proc_mode	= 0,
-};
diff --git a/arch/alpha/oprofile/op_model_ev67.c b/arch/alpha/oprofile/op_model_ev67.c
deleted file mode 100644
index adb1744d20f3..000000000000
--- a/arch/alpha/oprofile/op_model_ev67.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/**
- * @file arch/alpha/oprofile/op_model_ev67.c
- *
- * @remark Copyright 2002 OProfile authors
- * @remark Read the file COPYING
- *
- * @author Richard Henderson <rth@twiddle.net>
- * @author Falk Hueffner <falk@debian.org>
- */
-
-#include <linux/oprofile.h>
-#include <linux/smp.h>
-#include <asm/ptrace.h>
-
-#include "op_impl.h"
-
-
-/* Compute all of the registers in preparation for enabling profiling.  */
-
-static void
-ev67_reg_setup(struct op_register_config *reg,
-	       struct op_counter_config *ctr,
-	       struct op_system_config *sys)
-{
-	unsigned long ctl, reset, need_reset, i;
-
-	/* Select desired events.  */
-	ctl = 1UL << 4;		/* Enable ProfileMe mode. */
-
-	/* The event numbers are chosen so we can use them directly if
-	   PCTR1 is enabled.  */
-	if (ctr[1].enabled) {
-		ctl |= (ctr[1].event & 3) << 2;
-	} else {
-		if (ctr[0].event == 0) /* cycles */
-			ctl |= 1UL << 2;
-	}
-	reg->mux_select = ctl;
-
-	/* Select logging options.  */
-	/* ??? Need to come up with some mechanism to trace only
-	   selected processes.  EV67 does not have a mechanism to
-	   select kernel or user mode only.  For now, enable always.  */
-	reg->proc_mode = 0;
-
-	/* EV67 cannot change the width of the counters as with the
-	   other implementations.  But fortunately, we can write to
-	   the counters and set the value such that it will overflow
-	   at the right time.  */
-	reset = need_reset = 0;
-	for (i = 0; i < 2; ++i) {
-		unsigned long count = ctr[i].count;
-		if (!ctr[i].enabled)
-			continue;
-
-		if (count > 0x100000)
-			count = 0x100000;
-		ctr[i].count = count;
-		reset |= (0x100000 - count) << (i ? 6 : 28);
-		if (count != 0x100000)
-			need_reset |= 1 << i;
-	}
-	reg->reset_values = reset;
-	reg->need_reset = need_reset;
-}
-
-/* Program all of the registers in preparation for enabling profiling.  */
-
-static void
-ev67_cpu_setup (void *x)
-{
-	struct op_register_config *reg = x;
-
-	wrperfmon(2, reg->mux_select);
-	wrperfmon(3, reg->proc_mode);
-	wrperfmon(6, reg->reset_values | 3);
-}
-
-/* CTR is a counter for which the user has requested an interrupt count
-   in between one of the widths selectable in hardware.  Reset the count
-   for CTR to the value stored in REG->RESET_VALUES.  */
-
-static void
-ev67_reset_ctr(struct op_register_config *reg, unsigned long ctr)
-{
-	wrperfmon(6, reg->reset_values | (1 << ctr));
-}
-
-/* ProfileMe conditions which will show up as counters. We can also
-   detect the following, but it seems unlikely that anybody is
-   interested in counting them:
-    * Reset
-    * MT_FPCR (write to floating point control register)
-    * Arithmetic trap
-    * Dstream Fault
-    * Machine Check (ECC fault, etc.)
-    * OPCDEC (illegal opcode)
-    * Floating point disabled
-    * Differentiate between DTB single/double misses and 3 or 4 level
-      page tables
-    * Istream access violation
-    * Interrupt
-    * Icache Parity Error.
-    * Instruction killed (nop, trapb)
-
-   Unfortunately, there seems to be no way to detect Dcache and Bcache
-   misses; the latter could be approximated by making the counter
-   count Bcache misses, but that is not precise.
-
-   We model this as 20 counters:
-    * PCTR0
-    * PCTR1
-    * 9 ProfileMe events, induced by PCTR0
-    * 9 ProfileMe events, induced by PCTR1
-*/
-
-enum profileme_counters {
-	PM_STALLED,		/* Stalled for at least one cycle
-				   between the fetch and map stages  */
-	PM_TAKEN,		/* Conditional branch taken */
-	PM_MISPREDICT,		/* Branch caused mispredict trap */
-	PM_ITB_MISS,		/* ITB miss */
-	PM_DTB_MISS,		/* DTB miss */
-	PM_REPLAY,		/* Replay trap */
-	PM_LOAD_STORE,		/* Load-store order trap */
-	PM_ICACHE_MISS,		/* Icache miss */
-	PM_UNALIGNED,		/* Unaligned Load/Store */
-	PM_NUM_COUNTERS
-};
-
-static inline void
-op_add_pm(unsigned long pc, int kern, unsigned long counter,
-	  struct op_counter_config *ctr, unsigned long event)
-{
-	unsigned long fake_counter = 2 + event;
-	if (counter == 1)
-		fake_counter += PM_NUM_COUNTERS;
-	if (ctr[fake_counter].enabled)
-		oprofile_add_pc(pc, kern, fake_counter);
-}
-
-static void
-ev67_handle_interrupt(unsigned long which, struct pt_regs *regs,
-		      struct op_counter_config *ctr)
-{
-	unsigned long pmpc, pctr_ctl;
-	int kern = !user_mode(regs);
-	int mispredict = 0;
-	union {
-		unsigned long v;
-		struct {
-			unsigned reserved:	30; /*  0-29 */
-			unsigned overcount:	 3; /* 30-32 */
-			unsigned icache_miss:	 1; /*    33 */
-			unsigned trap_type:	 4; /* 34-37 */
-			unsigned load_store:	 1; /*    38 */
-			unsigned trap:		 1; /*    39 */
-			unsigned mispredict:	 1; /*    40 */
-		} fields;
-	} i_stat;
-
-	enum trap_types {
-		TRAP_REPLAY,
-		TRAP_INVALID0,
-		TRAP_DTB_DOUBLE_MISS_3,
-		TRAP_DTB_DOUBLE_MISS_4,
-		TRAP_FP_DISABLED,
-		TRAP_UNALIGNED,
-		TRAP_DTB_SINGLE_MISS,
-		TRAP_DSTREAM_FAULT,
-		TRAP_OPCDEC,
-		TRAP_INVALID1,
-		TRAP_MACHINE_CHECK,
-		TRAP_INVALID2,
-		TRAP_ARITHMETIC,
-		TRAP_INVALID3,
-		TRAP_MT_FPCR,
-		TRAP_RESET
-	};
-
-	pmpc = wrperfmon(9, 0);
-	/* ??? Don't know how to handle physical-mode PALcode address.  */
-	if (pmpc & 1)
-		return;
-	pmpc &= ~2;		/* clear reserved bit */
-
-	i_stat.v = wrperfmon(8, 0);
-	if (i_stat.fields.trap) {
-		switch (i_stat.fields.trap_type) {
-		case TRAP_INVALID1:
-		case TRAP_INVALID2:
-		case TRAP_INVALID3:
-			/* Pipeline redirection occurred. PMPC points
-			   to PALcode. Recognize ITB miss by PALcode
-			   offset address, and get actual PC from
-			   EXC_ADDR.  */
-			oprofile_add_pc(regs->pc, kern, which);
-			if ((pmpc & ((1 << 15) - 1)) ==  581)
-				op_add_pm(regs->pc, kern, which,
-					  ctr, PM_ITB_MISS);
-			/* Most other bit and counter values will be
-			   those for the first instruction in the
-			   fault handler, so we're done.  */
-			return;
-		case TRAP_REPLAY:
-			op_add_pm(pmpc, kern, which, ctr,
-				  (i_stat.fields.load_store
-				   ? PM_LOAD_STORE : PM_REPLAY));
-			break;
-		case TRAP_DTB_DOUBLE_MISS_3:
-		case TRAP_DTB_DOUBLE_MISS_4:
-		case TRAP_DTB_SINGLE_MISS:
-			op_add_pm(pmpc, kern, which, ctr, PM_DTB_MISS);
-			break;
-		case TRAP_UNALIGNED:
-			op_add_pm(pmpc, kern, which, ctr, PM_UNALIGNED);
-			break;
-		case TRAP_INVALID0:
-		case TRAP_FP_DISABLED:
-		case TRAP_DSTREAM_FAULT:
-		case TRAP_OPCDEC:
-		case TRAP_MACHINE_CHECK:
-		case TRAP_ARITHMETIC:
-		case TRAP_MT_FPCR:
-		case TRAP_RESET:
-			break;
-		}
-
-		/* ??? JSR/JMP/RET/COR or HW_JSR/HW_JMP/HW_RET/HW_COR
-		   mispredicts do not set this bit but can be
-		   recognized by the presence of one of these
-		   instructions at the PMPC location with bit 39
-		   set.  */
-		if (i_stat.fields.mispredict) {
-			mispredict = 1;
-			op_add_pm(pmpc, kern, which, ctr, PM_MISPREDICT);
-		}
-	}
-
-	oprofile_add_pc(pmpc, kern, which);
-
-	pctr_ctl = wrperfmon(5, 0);
-	if (pctr_ctl & (1UL << 27))
-		op_add_pm(pmpc, kern, which, ctr, PM_STALLED);
-
-	/* Unfortunately, TAK is undefined on mispredicted branches.
-	   ??? It is also undefined for non-cbranch insns, should
-	   check that.  */
-	if (!mispredict && pctr_ctl & (1UL << 0))
-		op_add_pm(pmpc, kern, which, ctr, PM_TAKEN);
-}
-
-struct op_axp_model op_model_ev67 = {
-	.reg_setup		= ev67_reg_setup,
-	.cpu_setup		= ev67_cpu_setup,
-	.reset_ctr		= ev67_reset_ctr,
-	.handle_interrupt	= ev67_handle_interrupt,
-	.cpu_type		= "alpha/ev67",
-	.num_counters		= 20,
-	.can_set_proc_mode	= 0,
-};
diff --git a/arch/arc/Kbuild b/arch/arc/Kbuild
index 699d8cae9b1f..20ea7dd482d4 100644
--- a/arch/arc/Kbuild
+++ b/arch/arc/Kbuild
@@ -1,3 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-y += kernel/
 obj-y += mm/
+obj-y += net/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 8383155c8c82..f27e6b90428e 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -6,52 +6,54 @@
 config ARC
 	def_bool y
 	select ARC_TIMERS
-	select ARCH_HAS_DMA_COHERENT_TO_PFN
+	select ARCH_HAS_CPU_CACHE_ALIASING
+	select ARCH_HAS_CACHE_LINE_SIZE
+	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DMA_PREP_COHERENT
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_NEED_CMPXCHG_1_EMU
 	select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
 	select ARCH_32BIT_OFF_T
-	select BUILDTIME_EXTABLE_SORT
+	select BUILDTIME_TABLE_SORT
+	select GENERIC_BUILTIN_DTB
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select DMA_DIRECT_REMAP
 	select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_FIND_FIRST_BIT
 	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
-	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_IOREMAP
+	select GENERIC_STRNCPY_FROM_USER if MMU
+	select GENERIC_STRNLEN_USER if MMU
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARC_MMU_V4
 	select HAVE_DEBUG_STACKOVERFLOW
-	select HAVE_FUTEX_CMPXCHG if FUTEX
+	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_IOREMAP_PROT
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZMA
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_MOD_ARCH_SPECIFIC
-	select HAVE_OPROFILE
 	select HAVE_PERF_EVENTS
-	select HANDLE_DOMAIN_IRQ
+	select HAVE_SYSCALL_TRACEPOINTS
 	select IRQ_DOMAIN
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_RELA
 	select OF
 	select OF_EARLY_FLATTREE
 	select PCI_SYSCALL if PCI
-	select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
-
-config ARCH_HAS_CACHE_LINE_SIZE
-	def_bool y
-
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
+	select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32
+	select TRACE_IRQFLAGS_SUPPORT
+	select HAVE_EBPF_JIT if ISA_ARCV2
 
 config LOCKDEP_SUPPORT
 	def_bool y
@@ -62,9 +64,6 @@ config SCHED_OMIT_FRAME_POINTER
 config GENERIC_CSUM
 	def_bool y
 
-config ARCH_DISCONTIGMEM_ENABLE
-	def_bool n
-
 config ARCH_FLATMEM_ENABLE
 	def_bool y
 
@@ -84,18 +83,12 @@ config STACKTRACE_SUPPORT
 	def_bool y
 	select STACKTRACE
 
-config HAVE_ARCH_TRANSPARENT_HUGEPAGE
-	def_bool y
-	depends on ARC_MMU_V4
-
 menu "ARC Architecture Configuration"
 
 menu "ARC Platform/SoC/Board"
 
 source "arch/arc/plat-tb10x/Kconfig"
 source "arch/arc/plat-axs10x/Kconfig"
-#New platform adds here
-source "arch/arc/plat-eznps/Kconfig"
 source "arch/arc/plat-hsdk/Kconfig"
 
 endmenu
@@ -125,16 +118,9 @@ choice
 	default ARC_CPU_770 if ISA_ARCOMPACT
 	default ARC_CPU_HS if ISA_ARCV2
 
-if ISA_ARCOMPACT
-
-config ARC_CPU_750D
-	bool "ARC750D"
-	select ARC_CANT_LLSC
-	help
-	  Support for ARC750 core
-
 config ARC_CPU_770
 	bool "ARC770"
+	depends on ISA_ARCOMPACT
 	select ARC_HAS_SWAPE
 	help
 	  Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
@@ -144,15 +130,13 @@ config ARC_CPU_770
 	  -Caches: New Prog Model, Region Flush
 	  -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
 
-endif #ISA_ARCOMPACT
-
 config ARC_CPU_HS
 	bool "ARC-HS"
 	depends on ISA_ARCV2
 	help
 	  Support for ARC HS38x Cores based on ARCv2 ISA
 	  The notable features are:
-	    - SMP configurations of upto 4 core with coherency
+	    - SMP configurations of up to 4 cores with coherency
 	    - Optional L2 Cache and IO-Coherency
 	    - Revised Interrupt Architecture (multiple priorites, reg banks,
 	        auto stack switch, auto regfile save/restore)
@@ -167,6 +151,15 @@ config ARC_CPU_HS
 
 endchoice
 
+config ARC_TUNE_MCPU
+	string "Override default -mcpu compiler flag"
+	default ""
+	help
+	  Override default -mcpu=xxx compiler flag (which is set depending on
+	  the ISA version) with the specified value.
+	  NOTE: If specified flag isn't supported by current compiler the
+	  ISA default value will be used as a fallback.
+
 config CPU_BIG_ENDIAN
 	bool "Enable Big Endian Mode"
 	help
@@ -190,7 +183,7 @@ config ARC_SMP_HALT_ON_RESET
 	help
 	  In SMP configuration cores can be configured as Halt-on-reset
 	  or they could all start at same time. For Halt-on-reset, non
-	  masters are parked until Master kicks them so they can start of
+	  masters are parked until Master kicks them so they can start off
 	  at designated entry point. For other case, all jump to common
 	  entry point and spin wait for Master's signal.
 
@@ -241,10 +234,6 @@ config ARC_CACHE_PAGES
 	  Note that Global I/D ENABLE + Per Page DISABLE works but corollary
 	  Global DISABLE + Per Page ENABLE won't work
 
-config ARC_CACHE_VIPT_ALIASING
-	bool "Support VIPT Aliasing D$"
-	depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
-
 endif #ARC_CACHE
 
 config ARC_HAS_ICCM
@@ -274,33 +263,17 @@ config ARC_DCCM_BASE
 
 choice
 	prompt "MMU Version"
-	default ARC_MMU_V3 if ARC_CPU_770
-	default ARC_MMU_V2 if ARC_CPU_750D
-	default ARC_MMU_V4 if ARC_CPU_HS
-
-if ISA_ARCOMPACT
-
-config ARC_MMU_V1
-	bool "MMU v1"
-	help
-	  Orig ARC700 MMU
-
-config ARC_MMU_V2
-	bool "MMU v2"
-	help
-	  Fixed the deficiency of v1 - possible thrashing in memcpy scenario
-	  when 2 D-TLB and 1 I-TLB entries index into same 2way set.
+	default ARC_MMU_V3 if ISA_ARCOMPACT
+	default ARC_MMU_V4 if ISA_ARCV2
 
 config ARC_MMU_V3
 	bool "MMU v3"
-	depends on ARC_CPU_770
+	depends on ISA_ARCOMPACT
 	help
 	  Introduced with ARC700 4.10: New Features
 	  Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
 	  Shared Address Spaces (SASID)
 
-endif
-
 config ARC_MMU_V4
 	bool "MMU v4"
 	depends on ISA_ARCV2
@@ -314,16 +287,17 @@ choice
 
 config ARC_PAGE_SIZE_8K
 	bool "8KB"
+	select HAVE_PAGE_SIZE_8KB
 	help
 	  Choose between 8k vs 16k
 
 config ARC_PAGE_SIZE_16K
+	select HAVE_PAGE_SIZE_16KB
 	bool "16KB"
-	depends on ARC_MMU_V3 || ARC_MMU_V4
 
 config ARC_PAGE_SIZE_4K
 	bool "4KB"
-	depends on ARC_MMU_V3 || ARC_MMU_V4
+	select HAVE_PAGE_SIZE_4KB
 
 endchoice
 
@@ -340,18 +314,12 @@ config ARC_HUGEPAGE_16M
 
 endchoice
 
-config NODES_SHIFT
-	int "Maximum NUMA Nodes (as a power of 2)"
-	default "0" if !DISCONTIGMEM
-	default "1" if DISCONTIGMEM
-	depends on NEED_MULTIPLE_NODES
-	---help---
-	  Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
-	  zones.
-
-if ISA_ARCOMPACT
+config PGTABLE_LEVELS
+	int "Number of Page table levels"
+	default 2
 
 config ARC_COMPACT_IRQ_LEVELS
+	depends on ISA_ARCOMPACT
 	bool "Setup Timer IRQ as high Priority"
 	# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
 	depends on !SMP
@@ -359,14 +327,10 @@ config ARC_COMPACT_IRQ_LEVELS
 config ARC_FPU_SAVE_RESTORE
 	bool "Enable FPU state persistence across context switch"
 	help
-	  Double Precision Floating Point unit had dedicated regs which
-	  need to be saved/restored across context-switch.
-	  Note that ARC FPU is overly simplistic, unlike say x86, which has
-	  hardware pieces to allow software to conditionally save/restore,
-	  based on actual usage of FPU by a task. Thus our implemn does
-	  this for all tasks in system.
-
-endif #ISA_ARCOMPACT
+	  ARCompact FPU has internal registers to assist with Double precision
+	  Floating Point operations. There are control and stauts registers
+	  for floating point exceptions and rounding modes. These are
+	  preserved across task context switch when enabled.
 
 config ARC_CANT_LLSC
 	def_bool n
@@ -404,13 +368,61 @@ config ARC_HAS_DIV_REM
 	default y
 
 config ARC_HAS_ACCL_REGS
-	bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6)"
+	bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6 and/or DSP)"
 	default y
 	help
 	  Depending on the configuration, CPU can contain accumulator reg-pair
 	  (also referred to as r58:r59). These can also be used by gcc as GPR so
 	  kernel needs to save/restore per process
 
+config ARC_DSP_HANDLED
+	def_bool n
+
+config ARC_DSP_SAVE_RESTORE_REGS
+	def_bool n
+
+choice
+	prompt "DSP support"
+	default ARC_DSP_NONE
+	help
+	  Depending on the configuration, CPU can contain DSP registers
+	  (ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_CTRL, DSP_FFT_CTRL).
+	  Below are options describing how to handle these registers in
+	  interrupt entry / exit and in context switch.
+
+config ARC_DSP_NONE
+	bool "No DSP extension presence in HW"
+	help
+	  No DSP extension presence in HW
+
+config ARC_DSP_KERNEL
+	bool "DSP extension in HW, no support for userspace"
+	select ARC_HAS_ACCL_REGS
+	select ARC_DSP_HANDLED
+	help
+	  DSP extension presence in HW, no support for DSP-enabled userspace
+	  applications. We don't save / restore DSP registers and only do
+	  some minimal preparations so userspace won't be able to break kernel
+
+config ARC_DSP_USERSPACE
+	bool "Support DSP for userspace apps"
+	select ARC_HAS_ACCL_REGS
+	select ARC_DSP_HANDLED
+	select ARC_DSP_SAVE_RESTORE_REGS
+	help
+	  DSP extension presence in HW, support save / restore DSP registers to
+	  run DSP-enabled userspace applications
+
+config ARC_DSP_AGU_USERSPACE
+	bool "Support DSP with AGU for userspace apps"
+	select ARC_HAS_ACCL_REGS
+	select ARC_DSP_HANDLED
+	select ARC_DSP_SAVE_RESTORE_REGS
+	help
+	  DSP and AGU extensions presence in HW, support save / restore DSP
+	  and AGU registers to run DSP-enabled userspace applications
+endchoice
+
 config ARC_IRQ_NO_AUTOSAVE
 	bool "Disable hardware autosave regfile on interrupts"
 	default n
@@ -419,6 +431,12 @@ config ARC_IRQ_NO_AUTOSAVE
 	  This is programmable and can be optionally disabled in which case
 	  software INTERRUPT_PROLOGUE/EPILGUE do the needed work
 
+config ARC_LPB_DISABLE
+	bool "Disable loop buffer (LPB)"
+	help
+	  On HS cores, loop buffer (LPB) is programmable in runtime and can
+	  be optionally disabled.
+
 endif # ISA_ARCV2
 
 endmenu   # "ARC CPU Configuration"
@@ -447,7 +465,8 @@ config LINUX_RAM_BASE
 
 config HIGHMEM
 	bool "High Memory Support"
-	select ARCH_DISCONTIGMEM_ENABLE
+	select HAVE_ARCH_PFN_VALID
+	select KMAP_LOCAL
 	help
 	  With ARC 2G:2G address split, only upper 2G is directly addressable by
 	  kernel. Enable this to potentially allow access to rest of 2G and PAE
@@ -455,7 +474,8 @@ config HIGHMEM
 
 config ARC_HAS_PAE40
 	bool "Support for the 40-bit Physical Address Extension"
-	depends on ISA_ARCV2
+	depends on ARC_MMU_V4
+	depends on !ARC_PAGE_SIZE_4K
 	select HIGHMEM
 	select PHYS_ADDR_T_64BIT
 	help
@@ -474,11 +494,11 @@ config ARC_KVADDR_SIZE
 	  kernel-user gutter)
 
 config ARC_CURR_IN_REG
-	bool "Dedicate Register r25 for current_task pointer"
+	bool "cache current task pointer in gp"
 	default y
 	help
-	  This reserved Register R25 to point to Current Task in
-	  kernel mode. This saves memory access for each such access
+	  This reserves gp register to point to Current Task in
+	  kernel mode eliding memory access for each access
 
 
 config ARC_EMUL_UNALIGNED
@@ -522,22 +542,26 @@ config ARC_DW2_UNWIND
 	  If you don't debug the kernel, you can say N, but we may not be able
 	  to solve problems without frame unwind information
 
-config ARC_DBG_TLB_PARANOIA
-	bool "Paranoia Checks in Low Level TLB Handlers"
-
+config ARC_DBG_JUMP_LABEL
+	bool "Paranoid checks in Static Keys (jump labels) code"
+	depends on JUMP_LABEL
+	default y if STATIC_KEYS_SELFTEST
+	help
+	  Enable paranoid checks and self-test of both ARC-specific and generic
+	  part of static keys (jump labels) related code.
 endif
 
-config ARC_BUILTIN_DTB_NAME
+config BUILTIN_DTB_NAME
 	string "Built in DTB"
+	default "nsim_700"
 	help
-	  Set the name of the DTB to embed in the vmlinux binary
-	  Leaving it blank selects the minimal "skeleton" dtb
+	  Set the name of the DTB to embed in the vmlinux binary.
 
 endmenu	 # "ARC Architecture Configuration"
 
-config FORCE_MAX_ZONEORDER
+config ARCH_FORCE_MAX_ORDER
 	int "Maximum zone order"
-	default "12" if ARC_HUGEPAGE_16M
-	default "11"
+	default "11" if ARC_HUGEPAGE_16M
+	default "10"
 
 source "kernel/power/Kconfig"
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index f1c44cccf8d6..0c5e6e6314f2 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -3,23 +3,39 @@
 # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
 #
 
-KBUILD_DEFCONFIG := nsim_hs_defconfig
+KBUILD_DEFCONFIG := haps_hs_smp_defconfig
 
 ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
+CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux- arc-linux-gnu-)
 endif
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
-cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7
-cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=hs38
+
+tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT)	:= -mcpu=arc700
+tune-mcpu-def-$(CONFIG_ISA_ARCV2)	:= -mcpu=hs38
+
+ifeq ($(CONFIG_ARC_TUNE_MCPU),)
+cflags-y				+= $(tune-mcpu-def-y)
+else
+tune-mcpu				:= $(CONFIG_ARC_TUNE_MCPU)
+ifneq ($(call cc-option,$(tune-mcpu)),)
+cflags-y				+= $(tune-mcpu)
+else
+# The flag provided by 'CONFIG_ARC_TUNE_MCPU' option isn't known by this compiler
+# (probably the compiler is too old). Use ISA default mcpu flag instead as a safe option.
+$(warning ** WARNING ** CONFIG_ARC_TUNE_MCPU flag '$(tune-mcpu)' is unknown, fallback to '$(tune-mcpu-def-y)')
+cflags-y				+= $(tune-mcpu-def-y)
+endif
+endif
 
 ifdef CONFIG_ARC_CURR_IN_REG
-# For a global register defintion, make sure it gets passed to every file
+# For a global register definition, make sure it gets passed to every file
 # We had a customer reported bug where some code built in kernel was NOT using
-# any kernel headers, and missing the r25 global register
+# any kernel headers, and missing the global register
 # Can't do unconditionally because of recursive include issues
 # due to <linux/thread_info.h>
 LINUXINCLUDE	+=  -include $(srctree)/arch/arc/include/asm/current.h
+cflags-y	+= -ffixed-gp
 endif
 
 cflags-y				+= -fsection-anchors
@@ -51,7 +67,7 @@ cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables $(cfi)
 # small data is default for elf32 tool-chain. If not usable, disable it
 # This also allows repurposing GP as scratch reg to gcc reg allocator
 disable_small_data := y
-cflags-$(disable_small_data)		+= -mno-sdata -fcall-used-gp
+cflags-$(disable_small_data)		+= -mno-sdata
 
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= -mbig-endian
 ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
@@ -66,40 +82,28 @@ KBUILD_CFLAGS	+= $(cflags-y)
 KBUILD_AFLAGS	+= $(KBUILD_CFLAGS)
 KBUILD_LDFLAGS	+= $(ldflags-y)
 
-head-y		:= arch/arc/kernel/head.o
-
-# See arch/arc/Kbuild for content of core part of the kernel
-core-y		+= arch/arc/
-
-# w/o this dtb won't embed into kernel binary
-core-y		+= arch/arc/boot/dts/
-
 core-y				+= arch/arc/plat-sim/
 core-$(CONFIG_ARC_PLAT_TB10X)	+= arch/arc/plat-tb10x/
 core-$(CONFIG_ARC_PLAT_AXS10X)	+= arch/arc/plat-axs10x/
-core-$(CONFIG_ARC_PLAT_EZNPS)	+= arch/arc/plat-eznps/
 core-$(CONFIG_ARC_SOC_HSDK)	+= arch/arc/plat-hsdk/
 
-ifdef CONFIG_ARC_PLAT_EZNPS
-KBUILD_CPPFLAGS += -I$(srctree)/arch/arc/plat-eznps/include
-endif
-
-drivers-$(CONFIG_OPROFILE)	+= arch/arc/oprofile/
-
 libs-y		+= arch/arc/lib/ $(LIBGCC)
 
 boot		:= arch/arc/boot
 
-#default target for make without any arguments.
-KBUILD_IMAGE	:= $(boot)/bootpImage
-
-all:	bootpImage
-bootpImage: vmlinux
-
-boot_targets += uImage uImage.bin uImage.gz
+boot_targets := uImage.bin uImage.gz uImage.lzma
 
+PHONY += $(boot_targets)
 $(boot_targets): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
+uimage-default-y			:= uImage.bin
+uimage-default-$(CONFIG_KERNEL_GZIP)	:= uImage.gz
+uimage-default-$(CONFIG_KERNEL_LZMA)	:= uImage.lzma
+
+PHONY += uImage
+uImage: $(uimage-default-y)
+	@ln -sf $< $(boot)/uImage
+	@$(kecho) '  Image $(boot)/uImage is ready'
+
+CLEAN_FILES += $(boot)/uImage
diff --git a/arch/arc/boot/.gitignore b/arch/arc/boot/.gitignore
index c4c5fd529c25..675db1494028 100644
--- a/arch/arc/boot/.gitignore
+++ b/arch/arc/boot/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 uImage
diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile
index 538b92f4dd25..5a8550124b73 100644
--- a/arch/arc/boot/Makefile
+++ b/arch/arc/boot/Makefile
@@ -1,29 +1,23 @@
 # SPDX-License-Identifier: GPL-2.0
-targets := vmlinux.bin vmlinux.bin.gz uImage
 
-# uImage build relies on mkimage being availble on your host for ARC target
+# uImage build relies on mkimage being available on your host for ARC target
 # You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage
-# and make sure it's reacable from your PATH
+# and make sure it's reachable from your PATH
 
 OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S
 
-LINUX_START_TEXT = $$(readelf -h vmlinux | \
+LINUX_START_TEXT = $$($(READELF) -h vmlinux | \
 			grep "Entry point address" | grep -o 0x.*)
 
 UIMAGE_LOADADDR    = $(CONFIG_LINUX_LINK_BASE)
 UIMAGE_ENTRYADDR   = $(LINUX_START_TEXT)
 
-suffix-y := bin
-suffix-$(CONFIG_KERNEL_GZIP)	:= gz
-suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
-
-targets += uImage
+targets += vmlinux.bin
+targets += vmlinux.bin.gz
+targets += vmlinux.bin.lzma
 targets += uImage.bin
 targets += uImage.gz
 targets += uImage.lzma
-extra-y += vmlinux.bin
-extra-y += vmlinux.bin.gz
-extra-y += vmlinux.bin.lzma
 
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
@@ -42,7 +36,3 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE
 
 $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE
 	$(call if_changed,uimage,lzma)
-
-$(obj)/uImage: $(obj)/uImage.$(suffix-y)
-	@ln -sf $(notdir $<) $@
-	@echo '  Image $@ is ready'
diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile
index 8483a86c743d..ee5664f0640d 100644
--- a/arch/arc/boot/dts/Makefile
+++ b/arch/arc/boot/dts/Makefile
@@ -1,17 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-# Built-in dtb
-builtindtb-y		:= nsim_700
 
-ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"")
-	builtindtb-y	:= $(patsubst "%",%,$(CONFIG_ARC_BUILTIN_DTB_NAME))
-endif
-
-obj-y   += $(builtindtb-y).dtb.o
-dtb-y := $(builtindtb-y).dtb
+dtb-y	:= $(addsuffix .dtb, $(CONFIG_BUILTIN_DTB_NAME))
 
 # for CONFIG_OF_ALL_DTBS test
-dtstree	:= $(srctree)/$(src)
-dtb-	:= $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+dtb-	:= $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
 
 # board-specific dtc flags
 DTC_FLAGS_hsdk += --pad 20
diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index 6ec1fcdfc0d7..88bcc7ab6f5a 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -28,6 +28,12 @@
 			clock-frequency = <750000000>;
 		};
 
+		input_clk: input-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <33333333>;
+		};
+
 		core_intc: arc700-intc@cpu {
 			compatible = "snps,arc700-intc";
 			interrupt-controller;
@@ -48,7 +54,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -85,7 +91,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index ac8e1b463a70..9a2dc39a5cff 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -62,7 +62,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -103,11 +103,11 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 
@@ -119,9 +119,9 @@
 	/*
 	 * The DW APB ICTL intc on MB is connected to CPU intc via a
 	 * DT "invisible" DW APB GPIO block, configured to simply pass thru
-	 * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c)
+	 * interrupts - setup accordingly in platform init (plat-axs10x/ax10x.c)
 	 *
-	 * So here we mimic a direct connection betwen them, ignoring the
+	 * So here we mimic a direct connection between them, ignoring the
 	 * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
 	 * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
 	 *
@@ -129,7 +129,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 9da21e7fd246..f31382cb8be4 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -69,7 +69,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -110,11 +110,11 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			dma-coherent;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			dma-coherent;
 		};
 
@@ -135,7 +135,7 @@
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axs101.dts b/arch/arc/boot/dts/axs101.dts
index 305a7f9658e0..c4cfc5f4f427 100644
--- a/arch/arc/boot/dts/axs101.dts
+++ b/arch/arc/boot/dts/axs101.dts
@@ -14,6 +14,6 @@
 	compatible = "snps,axs101", "snps,arc-sdp";
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60 print-fatal-signals=1";
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 print-fatal-signals=1";
 	};
 };
diff --git a/arch/arc/boot/dts/axs103_idu.dts b/arch/arc/boot/dts/axs103_idu.dts
index 46c9136cbf2b..a934b92a8c30 100644
--- a/arch/arc/boot/dts/axs103_idu.dts
+++ b/arch/arc/boot/dts/axs103_idu.dts
@@ -17,6 +17,6 @@
 	compatible = "snps,axs103", "snps,arc-sdp";
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0 video=1280x720@60";
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0";
 	};
 };
diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
index 08bcfed6b80f..3add2fe257f8 100644
--- a/arch/arc/boot/dts/axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/axs10x_mb.dtsi
@@ -61,12 +61,13 @@
 				clock-frequency = <25000000>;
 				#clock-cells = <0>;
 			};
+		};
 
-			pguclk: pguclk {
-				#clock-cells = <0>;
-				compatible = "fixed-clock";
-				clock-frequency = <74250000>;
-			};
+		pguclk: pguclk@10080 {
+			compatible = "snps,axs10x-pgu-pll-clock";
+			reg = <0x10080 0x10>, <0x110 0x10>;
+			#clock-cells = <0>;
+			clocks = <&input_clk>;
 		};
 
 		gmac: ethernet@18000 {
@@ -77,6 +78,7 @@
 			interrupt-names = "macirq";
 			phy-mode = "rgmii";
 			snps,pbl = < 32 >;
+			snps,multicast-filter-bins = <256>;
 			clocks = <&apbclk>;
 			clock-names = "stmmaceth";
 			max-speed = <100>;
@@ -85,13 +87,13 @@
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "generic-ohci";
 			reg = < 0x60000 0x100 >;
 			interrupts = < 8 >;
@@ -248,7 +250,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 			};
 
@@ -256,7 +258,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <1>;
 			};
 
@@ -264,7 +266,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <2>;
 			};
 		};
@@ -279,7 +281,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <30>;
+				ngpios = <30>;
 				reg = <0>;
 			};
 
@@ -287,7 +289,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <10>;
+				ngpios = <10>;
 				reg = <1>;
 			};
 
@@ -295,7 +297,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <8>;
+				ngpios = <8>;
 				reg = <2>;
 			};
 		};
@@ -303,7 +305,6 @@
 		pgu@17000 {
 			compatible = "snps,arcpgu";
 			reg = <0x17000 0x400>;
-			encoder-slave = <&adv7511>;
 			clocks = <&pguclk>;
 			clock-names = "pxlclk";
 			memory-region = <&frame_buffer>;
diff --git a/arch/arc/boot/dts/eznps.dts b/arch/arc/boot/dts/eznps.dts
deleted file mode 100644
index a7e2e8d8ff06..000000000000
--- a/arch/arc/boot/dts/eznps.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright(c) 2015 EZchip Technologies.
- */
-
-/dts-v1/;
-
-/ {
-	compatible = "ezchip,arc-nps";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-	present-cpus = "0-1,16-17";
-	possible-cpus = "0-4095";
-
-	aliases {
-		ethernet0 = &gmac0;
-	};
-
-	chosen {
-		bootargs = "earlycon=uart8250,mmio32be,0xf7209000,115200n8 console=ttyS0,115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>;	/* 512M */
-	};
-
-	clocks {
-		sysclk: sysclk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <83333333>;
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* child and parent address space 1:1 mapped */
-		ranges;
-
-		intc: interrupt-controller {
-			compatible = "ezchip,nps400-ic";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		timer0: timer_clkevt {
-			compatible = "snps,arc-timer";
-			interrupts = <3>;
-			clocks = <&sysclk>;
-		};
-
-		timer1: timer_clksrc {
-			compatible = "ezchip,nps400-timer";
-			clocks = <&sysclk>;
-			clock-names="sysclk";
-		};
-
-		uart@f7209000 {
-			compatible = "snps,dw-apb-uart";
-			device_type = "serial";
-			reg = <0xf7209000 0x100>;
-			interrupts = <6>;
-			clocks = <&sysclk>;
-			clock-names="baudclk";
-			baud = <115200>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			native-endian;
-		};
-
-		gmac0: ethernet@f7470000 {
-			compatible = "ezchip,nps-mgt-enet";
-			reg = <0xf7470000 0x1940>;
-			interrupts = <7>;
-			/* Filled in by U-Boot */
-			mac-address = [ 00 C0 00 F0 04 03 ];
-		};
-	};
-};
diff --git a/arch/arc/boot/dts/haps_hs.dts b/arch/arc/boot/dts/haps_hs.dts
index 44bc522fdec8..76ad527a0847 100644
--- a/arch/arc/boot/dts/haps_hs.dts
+++ b/arch/arc/boot/dts/haps_hs.dts
@@ -9,13 +9,15 @@
 / {
 	model = "snps,zebu_hs";
 	compatible = "snps,zebu_hs";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 	interrupt-parent = <&core_intc>;
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x20000000>;	/* 512 */
+		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
+		reg = <0x0 0x80000000 0x0 0x40000000	/* 1 GB low mem */
+		       0x1 0x00000000 0x0 0x40000000>;	/* 1 GB highmem */
 	};
 
 	chosen {
@@ -31,8 +33,9 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		/* child and parent address space 1:1 mapped */
-		ranges;
+		/* only perip space at end of low mem accessible
+			  bus addr,  parent bus addr, size    */
+		ranges = <0x80000000 0x0 0x80000000 0x80000000>;
 
 		core_clk: core_clk {
 			#clock-cells = <0>;
@@ -47,7 +50,7 @@
 		};
 
 		uart0: serial@f0000000 {
-			compatible = "ns8250";
+			compatible = "ns16550a";
 			reg = <0xf0000000 0x2000>;
 			interrupts = <24>;
 			clock-frequency = <50000000>;
diff --git a/arch/arc/boot/dts/haps_hs_idu.dts b/arch/arc/boot/dts/haps_hs_idu.dts
index 4d6971cf5f9f..738c76cd07b3 100644
--- a/arch/arc/boot/dts/haps_hs_idu.dts
+++ b/arch/arc/boot/dts/haps_hs_idu.dts
@@ -54,7 +54,6 @@
 		};
 
 		uart0: serial@f0000000 {
-			/* compatible = "ns8250"; Doesn't use FIFOs */
 			compatible = "ns16550a";
 			reg = <0xf0000000 0x2000>;
 			interrupt-parent = <&idu_intc>;
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index bfc7f5f5d6f2..98bb850722a4 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -65,6 +65,14 @@
 		clock-frequency = <33333333>;
 	};
 
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "5v0-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
 	cpu_intc: cpu-interrupt-controller {
 		compatible = "snps,archs-intc";
 		interrupt-controller;
@@ -80,6 +88,8 @@
 
 	arcpct: pct {
 		compatible = "snps,archs-pct";
+		interrupt-parent = <&cpu_intc>;
+		interrupts = <20>;
 	};
 
 	/* TIMER0 with interrupt for clockevent */
@@ -195,12 +205,11 @@
 		};
 
 		gmac: ethernet@8000 {
-			#interrupt-cells = <1>;
 			compatible = "snps,dwmac";
 			reg = <0x8000 0x2000>;
 			interrupts = <10>;
 			interrupt-names = "macirq";
-			phy-mode = "rgmii";
+			phy-mode = "rgmii-id";
 			snps,pbl = <32>;
 			snps,multicast-filter-bins = <256>;
 			clocks = <&gmacclk>;
@@ -218,13 +227,13 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "snps,dwmac-mdio";
-				phy0: ethernet-phy@0 {
+				phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
 					reg = <0>;
 				};
 			};
 		};
 
-		ohci@60000 {
+		usb@60000 {
 			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
 			reg = <0x60000 0x100>;
 			interrupts = <15>;
@@ -232,7 +241,7 @@
 			dma-coherent;
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
 			reg = <0x40000 0x100>;
 			interrupts = <15>;
@@ -264,6 +273,21 @@
 			clocks = <&input_clk>;
 			cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
 				   <&creg_gpio 1 GPIO_ACTIVE_LOW>;
+
+			flash@0 {
+				compatible = "sst26wf016b", "jedec,spi-nor";
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				spi-max-frequency = <4000000>;
+			};
+
+			adc@1 {
+				compatible = "ti,adc108s102";
+				reg = <1>;
+				vref-supply = <&reg_5v0>;
+				spi-max-frequency = <1000000>;
+			};
 		};
 
 		creg_gpio: gpio@14b0 {
@@ -284,7 +308,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <24>;
+				ngpios = <24>;
 				reg = <0>;
 			};
 		};
diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts
index 63dbaab1247d..f8832a15e174 100644
--- a/arch/arc/boot/dts/nsim_700.dts
+++ b/arch/arc/boot/dts/nsim_700.dts
@@ -14,11 +14,11 @@
 	interrupt-parent = <&core_intc>;
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {
-		serial0 = &arcuart0;
+		serial0 = &uart0;
 	};
 
 	fpga {
@@ -41,29 +41,15 @@
 			#interrupt-cells = <1>;
 		};
 
-		arcuart0: serial@c0fc1000 {
-			compatible = "snps,arc-uart";
-			reg = <0xc0fc1000 0x100>;
-			interrupts = <5>;
-			clock-frequency = <80000000>;
-			current-speed = <115200>;
-			status = "okay";
-		};
-
-		ethernet@c0fc2000 {
-			compatible = "snps,arc-emac";
-			reg = <0xc0fc2000 0x3c>;
-			interrupts = <6>;
-			mac-address = [ 00 11 22 33 44 55 ];
-			clock-frequency = <80000000>;
-			max-speed = <100>;
-			phy = <&phy0>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy0: ethernet-phy@0 {
-				reg = <1>;
-			};
+		uart0: serial@f0000000 {
+			compatible = "ns16550a";
+			reg = <0xf0000000 0x2000>;
+			interrupts = <24>;
+			clock-frequency = <50000000>;
+			baud = <115200>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			no-loopback-test = <1>;
 		};
 
 		arcpct0: pct {
diff --git a/arch/arc/boot/dts/nsim_hs.dts b/arch/arc/boot/dts/nsim_hs.dts
deleted file mode 100644
index 851798a5f4e3..000000000000
--- a/arch/arc/boot/dts/nsim_hs.dts
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
- */
-/dts-v1/;
-
-/include/ "skeleton_hs.dtsi"
-
-/ {
-	model = "snps,nsim_hs";
-	compatible = "snps,nsim_hs";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&core_intc>;
-
-	memory {
-		device_type = "memory";
-		/* CONFIG_LINUX_RAM_BASE needs to match low mem start */
-		reg = <0x0 0x80000000 0x0 0x20000000	/* 512 MB low mem */
-		       0x1 0x00000000 0x0 0x40000000>;	/* 1 GB highmem */
-	};
-
-	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
-	};
-
-	aliases {
-		serial0 = &arcuart0;
-	};
-
-	fpga {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* only perip space at end of low mem accessible
-			 bus addr,   parent bus addr, size */
-		ranges = <0x80000000 0x0 0x80000000 0x80000000>;
-
-		core_clk: core_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <80000000>;
-		};
-
-		core_intc: core-interrupt-controller {
-			compatible = "snps,archs-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		arcuart0: serial@c0fc1000 {
-			compatible = "snps,arc-uart";
-			reg = <0xc0fc1000 0x100>;
-			interrupts = <24>;
-			clock-frequency = <80000000>;
-			current-speed = <115200>;
-			status = "okay";
-		};
-
-		arcpct0: pct {
-			compatible = "snps,archs-pct";
-			#interrupt-cells = <1>;
-			interrupts = <20>;
-		};
-	};
-};
diff --git a/arch/arc/boot/dts/nsim_hs_idu.dts b/arch/arc/boot/dts/nsim_hs_idu.dts
deleted file mode 100644
index 6c559a0bd1f5..000000000000
--- a/arch/arc/boot/dts/nsim_hs_idu.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
- */
-/dts-v1/;
-
-/include/ "skeleton_hs_idu.dtsi"
-
-/ {
-	model = "snps,nsim_hs-smp";
-	compatible = "snps,nsim_hs";
-	interrupt-parent = <&core_intc>;
-
-	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
-	};
-
-	aliases {
-		serial0 = &arcuart0;
-	};
-
-	fpga {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* child and parent address space 1:1 mapped */
-		ranges;
-
-		core_clk: core_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <80000000>;
-		};
-
-		core_intc: core-interrupt-controller {
-			compatible = "snps,archs-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		idu_intc: idu-interrupt-controller {
-			compatible = "snps,archs-idu-intc";
-			interrupt-controller;
-			interrupt-parent = <&core_intc>;
-			#interrupt-cells = <1>;
-		};
-
-		arcuart0: serial@c0fc1000 {
-			compatible = "snps,arc-uart";
-			reg = <0xc0fc1000 0x100>;
-			interrupt-parent = <&idu_intc>;
-			interrupts = <0>;
-			clock-frequency = <80000000>;
-			current-speed = <115200>;
-			status = "okay";
-		};
-
-		arcpct0: pct {
-			compatible = "snps,archs-pct";
-			#interrupt-cells = <1>;
-			interrupts = <20>;
-		};
-	};
-};
diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi
index f8be7ba8dad4..c21d0eb07bf6 100644
--- a/arch/arc/boot/dts/vdk_axc003.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -46,7 +46,7 @@
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
index 0afa3e53a4e3..4d348853ac7c 100644
--- a/arch/arc/boot/dts/vdk_axc003_idu.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -54,7 +54,7 @@
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
index cbb179770293..0e0e2d337bf8 100644
--- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
+++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
@@ -46,7 +46,7 @@
 			clock-names = "stmmaceth";
 		};
 
-		ehci@40000 {
+		usb@40000 {
 			compatible = "generic-ehci";
 			reg = < 0x40000 0x100 >;
 			interrupts = < 8 >;
@@ -113,7 +113,7 @@
 	/*
 	 * Embedded Vision subsystem UIO mappings; only relevant for EV VDK
 	 *
-	 * This node is intentionally put outside of MB above becase
+	 * This node is intentionally put outside of MB above because
 	 * it maps areas outside of MB's 0xez-0xfz.
 	 */
 	uio_ev: uio@d0000000 {
diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig
index 0016149f9583..a7cd526dd7ca 100644
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@@ -9,8 +9,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -24,7 +23,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS101=y
 CONFIG_ARC_CACHE_LINE_SHIFT=5
-CONFIG_ARC_BUILTIN_DTB_NAME="axs101"
+CONFIG_BUILTIN_DTB_NAME="axs101"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -36,9 +35,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -70,6 +66,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=m
@@ -100,7 +97,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig
index 5b031582a1cf..afa6a348f444 100644
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@@ -9,8 +9,7 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -23,7 +22,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="axs103"
+CONFIG_BUILTIN_DTB_NAME="axs103"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -35,9 +34,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -70,6 +66,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
@@ -98,7 +95,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig
index d4eec39e0112..2bfa6371953c 100644
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@@ -9,12 +9,10 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -24,7 +22,7 @@ CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="axs103_idu"
+CONFIG_BUILTIN_DTB_NAME="axs103_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -36,9 +34,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
@@ -71,6 +66,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=m
@@ -101,7 +97,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig
index 47ff8a97e42d..3a1577112078 100644
--- a/arch/arc/configs/haps_hs_defconfig
+++ b/arch/arc/configs/haps_hs_defconfig
@@ -4,24 +4,19 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
+CONFIG_BUILTIN_DTB_NAME="haps_hs"
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs"
-CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -30,9 +25,6 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@@ -42,21 +34,12 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_VIRTIO_BLK=y
 CONFIG_NETDEVICES=y
 CONFIG_VIRTIO_NET=y
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_ETHERNET is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
-CONFIG_MOUSE_PS2_TOUCHKIT=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_ARC_PS2=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -66,9 +49,6 @@ CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_VIRTIO_MMIO=y
@@ -78,6 +58,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig
index 9685fd5f57a4..a3cf940b1f5b 100644
--- a/arch/arc/configs/haps_hs_smp_defconfig
+++ b/arch/arc/configs/haps_hs_smp_defconfig
@@ -4,27 +4,22 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
+CONFIG_SMP=y
+CONFIG_BUILTIN_DTB_NAME="haps_hs_idu"
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ISA_ARCV2=y
-CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu"
-CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -33,9 +28,6 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@@ -43,21 +35,12 @@ CONFIG_DEVTMPFS=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_ETHERNET is not set
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
-CONFIG_MOUSE_PS2_TOUCHKIT=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_ARC_PS2=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -67,9 +50,6 @@ CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_IOMMU_SUPPORT is not set
@@ -78,6 +58,5 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
index 9b9a74444ce2..1558e8e87767 100644
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@@ -9,12 +9,10 @@ CONFIG_NAMESPACES=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_ARC_SOC_HSDK=y
@@ -22,7 +20,7 @@ CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 CONFIG_LINUX_LINK_BASE=0x90000000
 CONFIG_LINUX_RAM_BASE=0x80000000
-CONFIG_ARC_BUILTIN_DTB_NAME="hsdk"
+CONFIG_BUILTIN_DTB_NAME="hsdk"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -32,6 +30,8 @@ CONFIG_INET=y
 CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -55,12 +55,15 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_SNPS_CREG=y
 # CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
 # CONFIG_DRM_FBDEV_EMULATION is not set
 CONFIG_DRM_UDL=y
 CONFIG_DRM_ETNAVIV=y
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
@@ -72,6 +75,8 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 CONFIG_DMADEVICES=y
 CONFIG_DW_AXI_DMAC=y
+CONFIG_IIO=y
+CONFIG_TI_ADC108S102=y
 CONFIG_EXT3_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
@@ -79,7 +84,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
diff --git a/arch/arc/configs/nps_defconfig b/arch/arc/configs/nps_defconfig
deleted file mode 100644
index 5978d4d7d5b0..000000000000
--- a/arch/arc/configs/nps_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_ISA_ARCOMPACT=y
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARC_PLAT_EZNPS=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4096
-CONFIG_ARC_CACHE_LINE_SHIFT=5
-# CONFIG_ARC_CACHE_PAGES is not set
-# CONFIG_ARC_HAS_LLSC is not set
-CONFIG_ARC_KVADDR_SIZE=402
-CONFIG_ARC_EMUL_UNALIGNED=y
-CONFIG_PREEMPT=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=2048
-CONFIG_NETDEVICES=y
-CONFIG_NETCONSOLE=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_ENABLE_DEFAULT_TRACERS=y
diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig
index 2b9b11474640..f8b3235d9a65 100644
--- a/arch/arc/configs/nsim_700_defconfig
+++ b/arch/arc/configs/nsim_700_defconfig
@@ -4,26 +4,23 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_ISA_ARCOMPACT=y
+CONFIG_BUILTIN_DTB_NAME="nsim_700"
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
-CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -37,15 +34,18 @@ CONFIG_DEVTMPFS=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_ARC_EMAC=y
-CONFIG_LXT_PHY=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_ETHERNET is not set
+# CONFIG_WLAN is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ARC=y
-CONFIG_SERIAL_ARC_CONSOLE=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_HID is not set
@@ -56,5 +56,4 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig
deleted file mode 100644
index bab3dd255841..000000000000
--- a/arch/arc/configs/nsim_hs_defconfig
+++ /dev/null
@@ -1,60 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs"
-CONFIG_PREEMPT=y
-# CONFIG_COMPACTION is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_UNIX_DIAG=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_DEVTMPFS=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ARC=y
-CONFIG_SERIAL_ARC_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_HID is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig
deleted file mode 100644
index 90d2d50fb8dc..000000000000
--- a/arch/arc/configs/nsim_hs_smp_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_PID_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ISA_ARCV2=y
-CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
-CONFIG_PREEMPT=y
-# CONFIG_COMPACTION is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_UNIX_DIAG=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_DEVTMPFS=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ARC=y
-CONFIG_SERIAL_ARC_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_HID is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_TMPFS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig
index 5dd470b6609e..ee45dc0877fb 100644
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@@ -10,9 +10,8 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
@@ -20,9 +19,7 @@ CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci"
+CONFIG_BUILTIN_DTB_NAME="nsimosci"
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -68,4 +65,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig
index 3532e86f7bff..e0a309970c20 100644
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@@ -10,19 +10,16 @@ CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs"
+CONFIG_BUILTIN_DTB_NAME="nsimosci_hs"
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -66,4 +63,3 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig
index d90448bee064..88325b8b49cf 100644
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@@ -8,18 +8,15 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_UTS_NS is not set
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 # CONFIG_ARC_TIMERS_64BIT is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
+CONFIG_BUILTIN_DTB_NAME="nsimosci_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -29,9 +26,6 @@ CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@@ -40,7 +34,6 @@ CONFIG_DEVTMPFS=y
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y
 # CONFIG_NET_VENDOR_INTEL is not set
@@ -77,5 +70,5 @@ CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FTRACE=y
+# CONFIG_NET_VENDOR_CADENCE is not set
diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig
index 3a138f8c7299..865fbc19ef03 100644
--- a/arch/arc/configs/tb10x_defconfig
+++ b/arch/arc/configs/tb10x_defconfig
@@ -14,14 +14,11 @@ CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio"
 CONFIG_INITRAMFS_ROOT_UID=2100
 CONFIG_INITRAMFS_ROOT_GID=501
 # CONFIG_RD_GZIP is not set
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_AIO is not set
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_ISA_ARCOMPACT=y
-CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@@ -29,7 +26,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARC_PLAT_TB10X=y
 CONFIG_ARC_CACHE_LINE_SHIFT=5
 CONFIG_HZ=250
-CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
+CONFIG_BUILTIN_DTB_NAME="abilis_tb100_dvk"
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y
@@ -37,15 +34,11 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_INTEL is not set
 # CONFIG_NET_VENDOR_MARVELL is not set
@@ -67,6 +60,7 @@ CONFIG_SERIAL_8250_DW=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_DESIGNWARE_CORE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
@@ -92,16 +86,15 @@ CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
-CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_INSTALL=y
-CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
 # CONFIG_CRYPTO_HW is not set
+# CONFIG_NET_VENDOR_CADENCE is not set
diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig
index d7c858df520c..03d9ac20baa9 100644
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@@ -4,8 +4,7 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -14,7 +13,7 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38"
+CONFIG_BUILTIN_DTB_NAME="vdk_hs38"
 CONFIG_PREEMPT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -59,8 +58,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_ARCPGU_RGB888=y
-CONFIG_ARCPGU_DISPTYPE=0
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
@@ -88,7 +85,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
index 015c1d43889e..c09488992f13 100644
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@@ -4,8 +4,7 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y
-CONFIG_EMBEDDED=y
+CONFIG_EXPERT=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
@@ -16,7 +15,7 @@ CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 # CONFIG_ARC_TIMERS_64BIT is not set
-CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
+CONFIG_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -92,7 +91,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
index 393d4f5e1450..4c69522e0328 100644
--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@@ -1,29 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-generic-y += bugs.h
-generic-y += compat.h
-generic-y += device.h
-generic-y += div64.h
-generic-y += dma-mapping.h
-generic-y += emergency-restart.h
+syscall-y += syscall_table_32.h
+
 generic-y += extable.h
-generic-y += ftrace.h
-generic-y += hardirq.h
-generic-y += hw_irq.h
-generic-y += irq_regs.h
-generic-y += irq_work.h
 generic-y += kvm_para.h
-generic-y += local.h
-generic-y += local64.h
 generic-y += mcs_spinlock.h
-generic-y += mm-arch-hooks.h
-generic-y += mmiowb.h
-generic-y += msi.h
 generic-y += parport.h
-generic-y += percpu.h
-generic-y += preempt.h
-generic-y += topology.h
-generic-y += trace_clock.h
 generic-y += user.h
-generic-y += vga.h
-generic-y += word-at-a-time.h
-generic-y += xor.h
+generic-y += text-patching.h
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index 5134f0baf33c..d84908a177bd 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -23,7 +23,7 @@
 #define ARC_REG_ICCM_BUILD	0x78	/* ICCM size (common) */
 #define ARC_REG_XY_MEM_BCR	0x79
 #define ARC_REG_MAC_BCR		0x7a
-#define ARC_REG_MUL_BCR		0x7b
+#define ARC_REG_MPY_BCR		0x7b
 #define ARC_REG_SWAP_BCR	0x7c
 #define ARC_REG_NORM_BCR	0x7d
 #define ARC_REG_MIXMAX_BCR	0x7e
@@ -39,6 +39,8 @@
 #define ARC_REG_CLUSTER_BCR	0xcf
 #define ARC_REG_AUX_ICCM	0x208	/* ICCM Base Addr (ARCv2) */
 #define ARC_REG_LPB_CTRL	0x488	/* ARCv2 Loop Buffer control */
+#define ARC_REG_FPU_CTRL	0x300
+#define ARC_REG_FPU_STATUS	0x301
 
 /* Common for ARCompact and ARCv2 status register */
 #define ARC_REG_STATUS32	0x0A
@@ -116,16 +118,39 @@
 #define ARC_AUX_DPFP_2H         0x304
 #define ARC_AUX_DPFP_STAT       0x305
 
-#ifndef __ASSEMBLY__
-
-#include <soc/arc/aux.h>
+/*
+ * DSP-related registers
+ * Registers names must correspond to dsp_callee_regs structure fields names
+ * for automatic offset calculation in DSP_AUX_SAVE_RESTORE macros.
+ */
+#define ARC_AUX_DSP_BUILD	0x7A
+#define ARC_AUX_ACC0_LO		0x580
+#define ARC_AUX_ACC0_GLO	0x581
+#define ARC_AUX_ACC0_HI		0x582
+#define ARC_AUX_ACC0_GHI	0x583
+#define ARC_AUX_DSP_BFLY0	0x598
+#define ARC_AUX_DSP_CTRL	0x59F
+#define ARC_AUX_DSP_FFT_CTRL	0x59E
+
+#define ARC_AUX_AGU_BUILD	0xCC
+#define ARC_AUX_AGU_AP0		0x5C0
+#define ARC_AUX_AGU_AP1		0x5C1
+#define ARC_AUX_AGU_AP2		0x5C2
+#define ARC_AUX_AGU_AP3		0x5C3
+#define ARC_AUX_AGU_OS0		0x5D0
+#define ARC_AUX_AGU_OS1		0x5D1
+#define ARC_AUX_AGU_MOD0	0x5E0
+#define ARC_AUX_AGU_MOD1	0x5E1
+#define ARC_AUX_AGU_MOD2	0x5E2
+#define ARC_AUX_AGU_MOD3	0x5E3
+
+#ifndef __ASSEMBLER__
+
+#include <soc/arc/arc_aux.h>
 
 /* Helpers */
 #define TO_KB(bytes)		((bytes) >> 10)
 #define TO_MB(bytes)		(TO_KB(bytes) >> 10)
-#define PAGES_TO_KB(n_pages)	((n_pages) << (PAGE_SHIFT - 10))
-#define PAGES_TO_MB(n_pages)	(PAGES_TO_KB(n_pages) >> 10)
-
 
 /*
  ***************************************************************
@@ -149,7 +174,7 @@ struct bcr_isa_arcv2 {
 #endif
 };
 
-struct bcr_uarch_build_arcv2 {
+struct bcr_uarch_build {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int pad:8, prod:8, maj:8, min:8;
 #else
@@ -157,6 +182,59 @@ struct bcr_uarch_build_arcv2 {
 #endif
 };
 
+struct bcr_mmu_3 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4,
+		     u_itlb:4, u_dtlb:4;
+#else
+	unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, sasid:1, res:3, sets:4,
+		     ways:4, ver:8;
+#endif
+};
+
+struct bcr_mmu_4 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int ver:8, sasid:1, sz1:4, sz0:4, res:2, pae:1,
+		     n_ways:2, n_entry:2, n_super:2, u_itlb:3, u_dtlb:3;
+#else
+	/*           DTLB      ITLB      JES        JE         JA      */
+	unsigned int u_dtlb:3, u_itlb:3, n_super:2, n_entry:2, n_ways:2,
+		     pae:1, res:2, sz0:4, sz1:4, sasid:1, ver:8;
+#endif
+};
+
+struct bcr_cache {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
+#else
+	unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
+#endif
+};
+
+struct bcr_slc_cfg {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:24, way:2, lsz:2, sz:4;
+#else
+	unsigned int sz:4, lsz:2, way:2, pad:24;
+#endif
+};
+
+struct bcr_clust_cfg {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8;
+#else
+	unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7;
+#endif
+};
+
+struct bcr_volatile {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int start:4, limit:4, pad:22, order:1, disable:1;
+#else
+	unsigned int disable:1, order:1, pad:22, limit:4, start:4;
+#endif
+};
+
 struct bcr_mpy {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int pad:8, x1616:8, dsp:4, cycles:2, type:2, ver:8;
@@ -274,48 +352,6 @@ struct bcr_generic {
 #endif
 };
 
-/*
- *******************************************************************
- * Generic structures to hold build configuration used at runtime
- */
-
-struct cpuinfo_arc_mmu {
-	unsigned int ver:4, pg_sz_k:8, s_pg_sz_m:8, pad:10, sasid:1, pae:1;
-	unsigned int sets:12, ways:4, u_dtlb:8, u_itlb:8;
-};
-
-struct cpuinfo_arc_cache {
-	unsigned int sz_k:14, line_len:8, assoc:4, alias:1, vipt:1, pad:4;
-};
-
-struct cpuinfo_arc_bpu {
-	unsigned int ver, full, num_cache, num_pred, ret_stk;
-};
-
-struct cpuinfo_arc_ccm {
-	unsigned int base_addr, sz;
-};
-
-struct cpuinfo_arc {
-	struct cpuinfo_arc_cache icache, dcache, slc;
-	struct cpuinfo_arc_mmu mmu;
-	struct cpuinfo_arc_bpu bpu;
-	struct bcr_identity core;
-	struct bcr_isa_arcv2 isa;
-	const char *release, *name;
-	unsigned int vec_base;
-	struct cpuinfo_arc_ccm iccm, dccm;
-	struct {
-		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
-			     fpu_sp:1, fpu_dp:1, dual:1, dual_enb:1, pad2:4,
-			     ap_num:4, ap_full:1, smart:1, rtt:1, pad3:1,
-			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
-	} extn;
-	struct bcr_mpy extn_mpy;
-};
-
-extern struct cpuinfo_arc cpuinfo_arc700[];
-
 static inline int is_isa_arcv2(void)
 {
 	return IS_ENABLED(CONFIG_ISA_ARCV2);
diff --git a/arch/arc/include/asm/asserts.h b/arch/arc/include/asm/asserts.h
new file mode 100644
index 000000000000..108f33be6aa5
--- /dev/null
+++ b/arch/arc/include/asm/asserts.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ */
+#ifndef __ASM_ARC_ASSERTS_H
+#define __ASM_ARC_ASSERTS_H
+
+/* Helpers to sanitize config options. */
+
+void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena);
+void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena);
+
+/*
+ * Check required config option:
+ *  - panic in case of OPT enabled but corresponding HW absent.
+ *  - warn in case of OPT disabled but corresponding HW exists.
+*/
+#define CHK_OPT_STRICT(opt_name, hw_exists)				\
+({									\
+	chk_opt_strict(#opt_name, hw_exists, IS_ENABLED(opt_name));	\
+})
+
+/*
+ * Check optional config option:
+ *  - panic in case of OPT enabled but corresponding HW absent.
+*/
+#define CHK_OPT_WEAK(opt_name, hw_exists)				\
+({									\
+	chk_opt_weak(#opt_name, hw_exists, IS_ENABLED(opt_name));	\
+})
+
+#endif /* __ASM_ARC_ASSERTS_H */
diff --git a/arch/arc/include/asm/atomic-llsc.h b/arch/arc/include/asm/atomic-llsc.h
new file mode 100644
index 000000000000..5258cb81a16b
--- /dev/null
+++ b/arch/arc/include/asm/atomic-llsc.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_ARC_ATOMIC_LLSC_H
+#define _ASM_ARC_ATOMIC_LLSC_H
+
+#define arch_atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
+
+#define ATOMIC_OP(op, asm_op)					\
+static inline void arch_atomic_##op(int i, atomic_t *v)			\
+{									\
+	unsigned int val;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[val], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[val], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
+	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
+	  [i]	"ir"	(i)						\
+	: "cc", "memory");						\
+}									\
+
+#define ATOMIC_OP_RETURN(op, asm_op)				\
+static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
+{									\
+	unsigned int val;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[val], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[val], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val)						\
+	: [ctr]	"r"	(&v->counter),					\
+	  [i]	"ir"	(i)						\
+	: "cc", "memory");						\
+									\
+	return val;							\
+}
+
+#define arch_atomic_add_return_relaxed		arch_atomic_add_return_relaxed
+#define arch_atomic_sub_return_relaxed		arch_atomic_sub_return_relaxed
+
+#define ATOMIC_FETCH_OP(op, asm_op)				\
+static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
+{									\
+	unsigned int val, orig;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[orig], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[orig], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val),						\
+	  [orig] "=&r" (orig)						\
+	: [ctr]	"r"	(&v->counter),					\
+	  [i]	"ir"	(i)						\
+	: "cc", "memory");						\
+									\
+	return orig;							\
+}
+
+#define arch_atomic_fetch_add_relaxed		arch_atomic_fetch_add_relaxed
+#define arch_atomic_fetch_sub_relaxed		arch_atomic_fetch_sub_relaxed
+
+#define arch_atomic_fetch_and_relaxed		arch_atomic_fetch_and_relaxed
+#define arch_atomic_fetch_andnot_relaxed	arch_atomic_fetch_andnot_relaxed
+#define arch_atomic_fetch_or_relaxed		arch_atomic_fetch_or_relaxed
+#define arch_atomic_fetch_xor_relaxed		arch_atomic_fetch_xor_relaxed
+
+#define ATOMIC_OPS(op, asm_op)					\
+	ATOMIC_OP(op, asm_op)					\
+	ATOMIC_OP_RETURN(op, asm_op)				\
+	ATOMIC_FETCH_OP(op, asm_op)
+
+ATOMIC_OPS(add, add)
+ATOMIC_OPS(sub, sub)
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op, asm_op)					\
+	ATOMIC_OP(op, asm_op)					\
+	ATOMIC_FETCH_OP(op, asm_op)
+
+ATOMIC_OPS(and, and)
+ATOMIC_OPS(andnot, bic)
+ATOMIC_OPS(or, or)
+ATOMIC_OPS(xor, xor)
+
+#define arch_atomic_andnot		arch_atomic_andnot
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#endif
diff --git a/arch/arc/include/asm/atomic-spinlock.h b/arch/arc/include/asm/atomic-spinlock.h
new file mode 100644
index 000000000000..89d12a60f84c
--- /dev/null
+++ b/arch/arc/include/asm/atomic-spinlock.h
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_ARC_ATOMIC_SPLOCK_H
+#define _ASM_ARC_ATOMIC_SPLOCK_H
+
+/*
+ * Non hardware assisted Atomic-R-M-W
+ * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
+ */
+
+static inline void arch_atomic_set(atomic_t *v, int i)
+{
+	/*
+	 * Independent of hardware support, all of the atomic_xxx() APIs need
+	 * to follow the same locking rules to make sure that a "hardware"
+	 * atomic insn (e.g. LD) doesn't clobber an "emulated" atomic insn
+	 * sequence
+	 *
+	 * Thus atomic_set() despite being 1 insn (and seemingly atomic)
+	 * requires the locking.
+	 */
+	unsigned long flags;
+
+	atomic_ops_lock(flags);
+	WRITE_ONCE(v->counter, i);
+	atomic_ops_unlock(flags);
+}
+
+#define arch_atomic_set_release(v, i)	arch_atomic_set((v), (i))
+
+#define ATOMIC_OP(op, c_op, asm_op)					\
+static inline void arch_atomic_##op(int i, atomic_t *v)			\
+{									\
+	unsigned long flags;						\
+									\
+	atomic_ops_lock(flags);						\
+	v->counter c_op i;						\
+	atomic_ops_unlock(flags);					\
+}
+
+#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+static inline int arch_atomic_##op##_return(int i, atomic_t *v)		\
+{									\
+	unsigned long flags;						\
+	unsigned int temp;						\
+									\
+	/*								\
+	 * spin lock/unlock provides the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(flags);						\
+	temp = v->counter;						\
+	temp c_op i;							\
+	v->counter = temp;						\
+	atomic_ops_unlock(flags);					\
+									\
+	return temp;							\
+}
+
+#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
+static inline int arch_atomic_fetch_##op(int i, atomic_t *v)		\
+{									\
+	unsigned long flags;						\
+	unsigned int orig;						\
+									\
+	/*								\
+	 * spin lock/unlock provides the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(flags);						\
+	orig = v->counter;						\
+	v->counter c_op i;						\
+	atomic_ops_unlock(flags);					\
+									\
+	return orig;							\
+}
+
+#define ATOMIC_OPS(op, c_op, asm_op)					\
+	ATOMIC_OP(op, c_op, asm_op)					\
+	ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
+
+ATOMIC_OPS(add, +=, add)
+ATOMIC_OPS(sub, -=, sub)
+
+#define arch_atomic_fetch_add		arch_atomic_fetch_add
+#define arch_atomic_fetch_sub		arch_atomic_fetch_sub
+#define arch_atomic_add_return		arch_atomic_add_return
+#define arch_atomic_sub_return		arch_atomic_sub_return
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op, c_op, asm_op)					\
+	ATOMIC_OP(op, c_op, asm_op)					\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
+
+ATOMIC_OPS(and, &=, and)
+ATOMIC_OPS(andnot, &= ~, bic)
+ATOMIC_OPS(or, |=, or)
+ATOMIC_OPS(xor, ^=, xor)
+
+#define arch_atomic_andnot		arch_atomic_andnot
+
+#define arch_atomic_fetch_and		arch_atomic_fetch_and
+#define arch_atomic_fetch_andnot	arch_atomic_fetch_andnot
+#define arch_atomic_fetch_or		arch_atomic_fetch_or
+#define arch_atomic_fetch_xor		arch_atomic_fetch_xor
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#endif
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 7298ce84762e..e615c42b93ba 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_ARC_ATOMIC_H
 #define _ASM_ARC_ATOMIC_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/compiler.h>
@@ -14,545 +14,23 @@
 #include <asm/barrier.h>
 #include <asm/smp.h>
 
-#define ATOMIC_INIT(i)	{ (i) }
-
-#ifndef CONFIG_ARC_PLAT_EZNPS
-
-#define atomic_read(v)  READ_ONCE((v)->counter)
+#define arch_atomic_read(v)  READ_ONCE((v)->counter)
 
 #ifdef CONFIG_ARC_HAS_LLSC
-
-#define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
-
-#define ATOMIC_OP(op, c_op, asm_op)					\
-static inline void atomic_##op(int i, atomic_t *v)			\
-{									\
-	unsigned int val;						\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock   %[val], [%[ctr]]		\n"		\
-	"	" #asm_op " %[val], %[val], %[i]	\n"		\
-	"	scond   %[val], [%[ctr]]		\n"		\
-	"	bnz     1b				\n"		\
-	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
-	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
-	  [i]	"ir"	(i)						\
-	: "cc");							\
-}									\
-
-#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-static inline int atomic_##op##_return(int i, atomic_t *v)		\
-{									\
-	unsigned int val;						\
-									\
-	/*								\
-	 * Explicit full memory barrier needed before/after as		\
-	 * LLOCK/SCOND thmeselves don't provide any such semantics	\
-	 */								\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock   %[val], [%[ctr]]		\n"		\
-	"	" #asm_op " %[val], %[val], %[i]	\n"		\
-	"	scond   %[val], [%[ctr]]		\n"		\
-	"	bnz     1b				\n"		\
-	: [val]	"=&r"	(val)						\
-	: [ctr]	"r"	(&v->counter),					\
-	  [i]	"ir"	(i)						\
-	: "cc");							\
-									\
-	smp_mb();							\
-									\
-	return val;							\
-}
-
-#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
-static inline int atomic_fetch_##op(int i, atomic_t *v)			\
-{									\
-	unsigned int val, orig;						\
-									\
-	/*								\
-	 * Explicit full memory barrier needed before/after as		\
-	 * LLOCK/SCOND thmeselves don't provide any such semantics	\
-	 */								\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock   %[orig], [%[ctr]]		\n"		\
-	"	" #asm_op " %[val], %[orig], %[i]	\n"		\
-	"	scond   %[val], [%[ctr]]		\n"		\
-	"	bnz     1b				\n"		\
-	: [val]	"=&r"	(val),						\
-	  [orig] "=&r" (orig)						\
-	: [ctr]	"r"	(&v->counter),					\
-	  [i]	"ir"	(i)						\
-	: "cc");							\
-									\
-	smp_mb();							\
-									\
-	return orig;							\
-}
-
-#else	/* !CONFIG_ARC_HAS_LLSC */
-
-#ifndef CONFIG_SMP
-
- /* violating atomic_xxx API locking protocol in UP for optimization sake */
-#define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
-
+#include <asm/atomic-llsc.h>
 #else
-
-static inline void atomic_set(atomic_t *v, int i)
-{
-	/*
-	 * Independent of hardware support, all of the atomic_xxx() APIs need
-	 * to follow the same locking rules to make sure that a "hardware"
-	 * atomic insn (e.g. LD) doesn't clobber an "emulated" atomic insn
-	 * sequence
-	 *
-	 * Thus atomic_set() despite being 1 insn (and seemingly atomic)
-	 * requires the locking.
-	 */
-	unsigned long flags;
-
-	atomic_ops_lock(flags);
-	WRITE_ONCE(v->counter, i);
-	atomic_ops_unlock(flags);
-}
-
-#define atomic_set_release(v, i)	atomic_set((v), (i))
-
+#include <asm/atomic-spinlock.h>
 #endif
 
 /*
- * Non hardware assisted Atomic-R-M-W
- * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
+ * 64-bit atomics
  */
-
-#define ATOMIC_OP(op, c_op, asm_op)					\
-static inline void atomic_##op(int i, atomic_t *v)			\
-{									\
-	unsigned long flags;						\
-									\
-	atomic_ops_lock(flags);						\
-	v->counter c_op i;						\
-	atomic_ops_unlock(flags);					\
-}
-
-#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-static inline int atomic_##op##_return(int i, atomic_t *v)		\
-{									\
-	unsigned long flags;						\
-	unsigned long temp;						\
-									\
-	/*								\
-	 * spin lock/unlock provides the needed smp_mb() before/after	\
-	 */								\
-	atomic_ops_lock(flags);						\
-	temp = v->counter;						\
-	temp c_op i;							\
-	v->counter = temp;						\
-	atomic_ops_unlock(flags);					\
-									\
-	return temp;							\
-}
-
-#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
-static inline int atomic_fetch_##op(int i, atomic_t *v)			\
-{									\
-	unsigned long flags;						\
-	unsigned long orig;						\
-									\
-	/*								\
-	 * spin lock/unlock provides the needed smp_mb() before/after	\
-	 */								\
-	atomic_ops_lock(flags);						\
-	orig = v->counter;						\
-	v->counter c_op i;						\
-	atomic_ops_unlock(flags);					\
-									\
-	return orig;							\
-}
-
-#endif /* !CONFIG_ARC_HAS_LLSC */
-
-#define ATOMIC_OPS(op, c_op, asm_op)					\
-	ATOMIC_OP(op, c_op, asm_op)					\
-	ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-	ATOMIC_FETCH_OP(op, c_op, asm_op)
-
-ATOMIC_OPS(add, +=, add)
-ATOMIC_OPS(sub, -=, sub)
-
-#define atomic_andnot		atomic_andnot
-#define atomic_fetch_andnot	atomic_fetch_andnot
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op, c_op, asm_op)					\
-	ATOMIC_OP(op, c_op, asm_op)					\
-	ATOMIC_FETCH_OP(op, c_op, asm_op)
-
-ATOMIC_OPS(and, &=, and)
-ATOMIC_OPS(andnot, &= ~, bic)
-ATOMIC_OPS(or, |=, or)
-ATOMIC_OPS(xor, ^=, xor)
-
-#else /* CONFIG_ARC_PLAT_EZNPS */
-
-static inline int atomic_read(const atomic_t *v)
-{
-	int temp;
-
-	__asm__ __volatile__(
-	"	ld.di %0, [%1]"
-	: "=r"(temp)
-	: "r"(&v->counter)
-	: "memory");
-	return temp;
-}
-
-static inline void atomic_set(atomic_t *v, int i)
-{
-	__asm__ __volatile__(
-	"	st.di %0,[%1]"
-	:
-	: "r"(i), "r"(&v->counter)
-	: "memory");
-}
-
-#define ATOMIC_OP(op, c_op, asm_op)					\
-static inline void atomic_##op(int i, atomic_t *v)			\
-{									\
-	__asm__ __volatile__(						\
-	"	mov r2, %0\n"						\
-	"	mov r3, %1\n"						\
-	"       .word %2\n"						\
-	:								\
-	: "r"(i), "r"(&v->counter), "i"(asm_op)				\
-	: "r2", "r3", "memory");					\
-}									\
-
-#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-static inline int atomic_##op##_return(int i, atomic_t *v)		\
-{									\
-	unsigned int temp = i;						\
-									\
-	/* Explicit full memory barrier needed before/after */		\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"	mov r2, %0\n"						\
-	"	mov r3, %1\n"						\
-	"       .word %2\n"						\
-	"	mov %0, r2"						\
-	: "+r"(temp)							\
-	: "r"(&v->counter), "i"(asm_op)					\
-	: "r2", "r3", "memory");					\
-									\
-	smp_mb();							\
-									\
-	temp c_op i;							\
-									\
-	return temp;							\
-}
-
-#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
-static inline int atomic_fetch_##op(int i, atomic_t *v)			\
-{									\
-	unsigned int temp = i;						\
-									\
-	/* Explicit full memory barrier needed before/after */		\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"	mov r2, %0\n"						\
-	"	mov r3, %1\n"						\
-	"       .word %2\n"						\
-	"	mov %0, r2"						\
-	: "+r"(temp)							\
-	: "r"(&v->counter), "i"(asm_op)					\
-	: "r2", "r3", "memory");					\
-									\
-	smp_mb();							\
-									\
-	return temp;							\
-}
-
-#define ATOMIC_OPS(op, c_op, asm_op)					\
-	ATOMIC_OP(op, c_op, asm_op)					\
-	ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-	ATOMIC_FETCH_OP(op, c_op, asm_op)
-
-ATOMIC_OPS(add, +=, CTOP_INST_AADD_DI_R2_R2_R3)
-#define atomic_sub(i, v) atomic_add(-(i), (v))
-#define atomic_sub_return(i, v) atomic_add_return(-(i), (v))
-#define atomic_fetch_sub(i, v) atomic_fetch_add(-(i), (v))
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op, c_op, asm_op)					\
-	ATOMIC_OP(op, c_op, asm_op)					\
-	ATOMIC_FETCH_OP(op, c_op, asm_op)
-
-ATOMIC_OPS(and, &=, CTOP_INST_AAND_DI_R2_R2_R3)
-ATOMIC_OPS(or, |=, CTOP_INST_AOR_DI_R2_R2_R3)
-ATOMIC_OPS(xor, ^=, CTOP_INST_AXOR_DI_R2_R2_R3)
-
-#endif /* CONFIG_ARC_PLAT_EZNPS */
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
 #ifdef CONFIG_GENERIC_ATOMIC64
-
 #include <asm-generic/atomic64.h>
+#else
+#include <asm/atomic64-arcv2.h>
+#endif
 
-#else	/* Kconfig ensures this is only enabled with needed h/w assist */
-
-/*
- * ARCv2 supports 64-bit exclusive load (LLOCKD) / store (SCONDD)
- *  - The address HAS to be 64-bit aligned
- *  - There are 2 semantics involved here:
- *    = exclusive implies no interim update between load/store to same addr
- *    = both words are observed/updated together: this is guaranteed even
- *      for regular 64-bit load (LDD) / store (STD). Thus atomic64_set()
- *      is NOT required to use LLOCKD+SCONDD, STD suffices
- */
-
-typedef struct {
-	s64 __aligned(8) counter;
-} atomic64_t;
-
-#define ATOMIC64_INIT(a) { (a) }
-
-static inline s64 atomic64_read(const atomic64_t *v)
-{
-	s64 val;
-
-	__asm__ __volatile__(
-	"	ldd   %0, [%1]	\n"
-	: "=r"(val)
-	: "r"(&v->counter));
-
-	return val;
-}
-
-static inline void atomic64_set(atomic64_t *v, s64 a)
-{
-	/*
-	 * This could have been a simple assignment in "C" but would need
-	 * explicit volatile. Otherwise gcc optimizers could elide the store
-	 * which borked atomic64 self-test
-	 * In the inline asm version, memory clobber needed for exact same
-	 * reason, to tell gcc about the store.
-	 *
-	 * This however is not needed for sibling atomic64_add() etc since both
-	 * load/store are explicitly done in inline asm. As long as API is used
-	 * for each access, gcc has no way to optimize away any load/store
-	 */
-	__asm__ __volatile__(
-	"	std   %0, [%1]	\n"
-	:
-	: "r"(a), "r"(&v->counter)
-	: "memory");
-}
-
-#define ATOMIC64_OP(op, op1, op2)					\
-static inline void atomic64_##op(s64 a, atomic64_t *v)			\
-{									\
-	s64 val;							\
-									\
-	__asm__ __volatile__(						\
-	"1:				\n"				\
-	"	llockd  %0, [%1]	\n"				\
-	"	" #op1 " %L0, %L0, %L2	\n"				\
-	"	" #op2 " %H0, %H0, %H2	\n"				\
-	"	scondd   %0, [%1]	\n"				\
-	"	bnz     1b		\n"				\
-	: "=&r"(val)							\
-	: "r"(&v->counter), "ir"(a)					\
-	: "cc");							\
-}									\
-
-#define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
-static inline s64 atomic64_##op##_return(s64 a, atomic64_t *v)		\
-{									\
-	s64 val;							\
-									\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:				\n"				\
-	"	llockd   %0, [%1]	\n"				\
-	"	" #op1 " %L0, %L0, %L2	\n"				\
-	"	" #op2 " %H0, %H0, %H2	\n"				\
-	"	scondd   %0, [%1]	\n"				\
-	"	bnz     1b		\n"				\
-	: [val] "=&r"(val)						\
-	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
-									\
-	smp_mb();							\
-									\
-	return val;							\
-}
-
-#define ATOMIC64_FETCH_OP(op, op1, op2)		        		\
-static inline s64 atomic64_fetch_##op(s64 a, atomic64_t *v)		\
-{									\
-	s64 val, orig;							\
-									\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:				\n"				\
-	"	llockd   %0, [%2]	\n"				\
-	"	" #op1 " %L1, %L0, %L3	\n"				\
-	"	" #op2 " %H1, %H0, %H3	\n"				\
-	"	scondd   %1, [%2]	\n"				\
-	"	bnz     1b		\n"				\
-	: "=&r"(orig), "=&r"(val)					\
-	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
-									\
-	smp_mb();							\
-									\
-	return orig;							\
-}
-
-#define ATOMIC64_OPS(op, op1, op2)					\
-	ATOMIC64_OP(op, op1, op2)					\
-	ATOMIC64_OP_RETURN(op, op1, op2)				\
-	ATOMIC64_FETCH_OP(op, op1, op2)
-
-#define atomic64_andnot		atomic64_andnot
-#define atomic64_fetch_andnot	atomic64_fetch_andnot
-
-ATOMIC64_OPS(add, add.f, adc)
-ATOMIC64_OPS(sub, sub.f, sbc)
-ATOMIC64_OPS(and, and, and)
-ATOMIC64_OPS(andnot, bic, bic)
-ATOMIC64_OPS(or, or, or)
-ATOMIC64_OPS(xor, xor, xor)
-
-#undef ATOMIC64_OPS
-#undef ATOMIC64_FETCH_OP
-#undef ATOMIC64_OP_RETURN
-#undef ATOMIC64_OP
-
-static inline s64
-atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
-{
-	s64 prev;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%1]	\n"
-	"	brne    %L0, %L2, 2f	\n"
-	"	brne    %H0, %H2, 2f	\n"
-	"	scondd  %3, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(prev)
-	: "r"(ptr), "ir"(expected), "r"(new)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return prev;
-}
-
-static inline s64 atomic64_xchg(atomic64_t *ptr, s64 new)
-{
-	s64 prev;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%1]	\n"
-	"	scondd  %2, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(prev)
-	: "r"(ptr), "r"(new)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return prev;
-}
-
-/**
- * atomic64_dec_if_positive - decrement by 1 if old value positive
- * @v: pointer of type atomic64_t
- *
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
-
-static inline s64 atomic64_dec_if_positive(atomic64_t *v)
-{
-	s64 val;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%1]	\n"
-	"	sub.f   %L0, %L0, 1	# w0 - 1, set C on borrow\n"
-	"	sub.c   %H0, %H0, 1	# if C set, w1 - 1\n"
-	"	brlt    %H0, 0, 2f	\n"
-	"	scondd  %0, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(val)
-	: "r"(&v->counter)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return val;
-}
-#define atomic64_dec_if_positive atomic64_dec_if_positive
-
-/**
- * atomic64_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, if it was not @u.
- * Returns the old value of @v
- */
-static inline s64 atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
-{
-	s64 old, temp;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%2]	\n"
-	"	brne	%L0, %L4, 2f	# continue to add since v != u \n"
-	"	breq.d	%H0, %H4, 3f	# return since v == u \n"
-	"2:				\n"
-	"	add.f   %L1, %L0, %L3	\n"
-	"	adc     %H1, %H0, %H3	\n"
-	"	scondd  %1, [%2]	\n"
-	"	bnz     1b		\n"
-	"3:				\n"
-	: "=&r"(old), "=&r" (temp)
-	: "r"(&v->counter), "r"(a), "r"(u)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return old;
-}
-#define atomic64_fetch_add_unless atomic64_fetch_add_unless
-
-#endif	/* !CONFIG_GENERIC_ATOMIC64 */
-
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/atomic64-arcv2.h b/arch/arc/include/asm/atomic64-arcv2.h
new file mode 100644
index 000000000000..73080a664369
--- /dev/null
+++ b/arch/arc/include/asm/atomic64-arcv2.h
@@ -0,0 +1,230 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * ARCv2 supports 64-bit exclusive load (LLOCKD) / store (SCONDD)
+ *  - The address HAS to be 64-bit aligned
+ */
+
+#ifndef _ASM_ARC_ATOMIC64_ARCV2_H
+#define _ASM_ARC_ATOMIC64_ARCV2_H
+
+typedef struct {
+	s64 __aligned(8) counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(a) { (a) }
+
+static inline s64 arch_atomic64_read(const atomic64_t *v)
+{
+	s64 val;
+
+	__asm__ __volatile__(
+	"	ldd   %0, [%1]	\n"
+	: "=r"(val)
+	: "r"(&v->counter));
+
+	return val;
+}
+
+static inline void arch_atomic64_set(atomic64_t *v, s64 a)
+{
+	/*
+	 * This could have been a simple assignment in "C" but would need
+	 * explicit volatile. Otherwise gcc optimizers could elide the store
+	 * which borked atomic64 self-test
+	 * In the inline asm version, memory clobber needed for exact same
+	 * reason, to tell gcc about the store.
+	 *
+	 * This however is not needed for sibling atomic64_add() etc since both
+	 * load/store are explicitly done in inline asm. As long as API is used
+	 * for each access, gcc has no way to optimize away any load/store
+	 */
+	__asm__ __volatile__(
+	"	std   %0, [%1]	\n"
+	:
+	: "r"(a), "r"(&v->counter)
+	: "memory");
+}
+
+#define ATOMIC64_OP(op, op1, op2)					\
+static inline void arch_atomic64_##op(s64 a, atomic64_t *v)		\
+{									\
+	s64 val;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd  %0, [%1]	\n"				\
+	"	" #op1 " %L0, %L0, %L2	\n"				\
+	"	" #op2 " %H0, %H0, %H2	\n"				\
+	"	scondd   %0, [%1]	\n"				\
+	"	bnz     1b		\n"				\
+	: "=&r"(val)							\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc", "memory");						\
+}									\
+
+#define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
+static inline s64 arch_atomic64_##op##_return_relaxed(s64 a, atomic64_t *v)	\
+{									\
+	s64 val;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd   %0, [%1]	\n"				\
+	"	" #op1 " %L0, %L0, %L2	\n"				\
+	"	" #op2 " %H0, %H0, %H2	\n"				\
+	"	scondd   %0, [%1]	\n"				\
+	"	bnz     1b		\n"				\
+	: [val] "=&r"(val)						\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc", "memory");						\
+									\
+	return val;							\
+}
+
+#define arch_atomic64_add_return_relaxed	arch_atomic64_add_return_relaxed
+#define arch_atomic64_sub_return_relaxed	arch_atomic64_sub_return_relaxed
+
+#define ATOMIC64_FETCH_OP(op, op1, op2)		        		\
+static inline s64 arch_atomic64_fetch_##op##_relaxed(s64 a, atomic64_t *v)	\
+{									\
+	s64 val, orig;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd   %0, [%2]	\n"				\
+	"	" #op1 " %L1, %L0, %L3	\n"				\
+	"	" #op2 " %H1, %H0, %H3	\n"				\
+	"	scondd   %1, [%2]	\n"				\
+	"	bnz     1b		\n"				\
+	: "=&r"(orig), "=&r"(val)					\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc", "memory");						\
+									\
+	return orig;							\
+}
+
+#define arch_atomic64_fetch_add_relaxed		arch_atomic64_fetch_add_relaxed
+#define arch_atomic64_fetch_sub_relaxed		arch_atomic64_fetch_sub_relaxed
+
+#define arch_atomic64_fetch_and_relaxed		arch_atomic64_fetch_and_relaxed
+#define arch_atomic64_fetch_andnot_relaxed	arch_atomic64_fetch_andnot_relaxed
+#define arch_atomic64_fetch_or_relaxed		arch_atomic64_fetch_or_relaxed
+#define arch_atomic64_fetch_xor_relaxed		arch_atomic64_fetch_xor_relaxed
+
+#define ATOMIC64_OPS(op, op1, op2)					\
+	ATOMIC64_OP(op, op1, op2)					\
+	ATOMIC64_OP_RETURN(op, op1, op2)				\
+	ATOMIC64_FETCH_OP(op, op1, op2)
+
+ATOMIC64_OPS(add, add.f, adc)
+ATOMIC64_OPS(sub, sub.f, sbc)
+
+#undef ATOMIC64_OPS
+#define ATOMIC64_OPS(op, op1, op2)					\
+	ATOMIC64_OP(op, op1, op2)					\
+	ATOMIC64_FETCH_OP(op, op1, op2)
+
+ATOMIC64_OPS(and, and, and)
+ATOMIC64_OPS(andnot, bic, bic)
+ATOMIC64_OPS(or, or, or)
+ATOMIC64_OPS(xor, xor, xor)
+
+#define arch_atomic64_andnot		arch_atomic64_andnot
+
+#undef ATOMIC64_OPS
+#undef ATOMIC64_FETCH_OP
+#undef ATOMIC64_OP_RETURN
+#undef ATOMIC64_OP
+
+static inline u64 __arch_cmpxchg64_relaxed(volatile void *ptr, u64 old, u64 new)
+{
+	u64 prev;
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	brne    %L0, %L2, 2f	\n"
+	"	brne    %H0, %H2, 2f	\n"
+	"	scondd  %3, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(prev)
+	: "r"(ptr), "ir"(old), "r"(new)
+	: "memory", "cc");
+
+	return prev;
+}
+#define arch_cmpxchg64_relaxed __arch_cmpxchg64_relaxed
+
+static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
+{
+	s64 prev;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	scondd  %2, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(prev)
+	: "r"(ptr), "r"(new)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return prev;
+}
+#define arch_atomic64_xchg arch_atomic64_xchg
+
+static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
+{
+	s64 val;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	sub.f   %L0, %L0, 1	# w0 - 1, set C on borrow\n"
+	"	sub.c   %H0, %H0, 1	# if C set, w1 - 1\n"
+	"	brlt    %H0, 0, 2f	\n"
+	"	scondd  %0, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(val)
+	: "r"(&v->counter)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return val;
+}
+#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
+
+static inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
+{
+	s64 old, temp;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%2]	\n"
+	"	brne	%L0, %L4, 2f	# continue to add since v != u \n"
+	"	breq.d	%H0, %H4, 3f	# return since v == u \n"
+	"2:				\n"
+	"	add.f   %L1, %L0, %L3	\n"
+	"	adc     %H1, %H0, %H3	\n"
+	"	scondd  %1, [%2]	\n"
+	"	bnz     1b		\n"
+	"3:				\n"
+	: "=&r"(old), "=&r" (temp)
+	: "r"(&v->counter), "r"(a), "r"(u)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return old;
+}
+#define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
+
+#endif
diff --git a/arch/arc/include/asm/barrier.h b/arch/arc/include/asm/barrier.h
index 7823811e7cf5..4637de9e02fa 100644
--- a/arch/arc/include/asm/barrier.h
+++ b/arch/arc/include/asm/barrier.h
@@ -27,7 +27,7 @@
 #define rmb()	asm volatile("dmb 1\n" : : : "memory")
 #define wmb()	asm volatile("dmb 2\n" : : : "memory")
 
-#elif !defined(CONFIG_ARC_PLAT_EZNPS)  /* CONFIG_ISA_ARCOMPACT */
+#else
 
 /*
  * ARCompact based cores (ARC700) only have SYNC instruction which is super
@@ -37,13 +37,6 @@
 
 #define mb()	asm volatile("sync\n" : : : "memory")
 
-#else	/* CONFIG_ARC_PLAT_EZNPS */
-
-#include <plat/ctop.h>
-
-#define mb()	asm volatile (".word %0" : : "i"(CTOP_INST_SCHD_RW) : "memory")
-#define rmb()	asm volatile (".word %0" : : "i"(CTOP_INST_SCHD_RD) : "memory")
-
 #endif
 
 #include <asm-generic/barrier.h>
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index 50eb3f64a77c..df894235fdbc 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -10,246 +10,10 @@
 #error only <linux/bitops.h> can be included directly
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/compiler.h>
-#include <asm/barrier.h>
-#ifndef CONFIG_ARC_HAS_LLSC
-#include <asm/smp.h>
-#endif
-
-#ifdef CONFIG_ARC_HAS_LLSC
-
-/*
- * Hardware assisted Atomic-R-M-W
- */
-
-#define BIT_OP(op, c_op, asm_op)					\
-static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned int temp;						\
-									\
-	m += nr >> 5;							\
-									\
-	nr &= 0x1f;							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock       %0, [%1]		\n"			\
-	"	" #asm_op " %0, %0, %2	\n"				\
-	"	scond       %0, [%1]		\n"			\
-	"	bnz         1b			\n"			\
-	: "=&r"(temp)	/* Early clobber, to prevent reg reuse */	\
-	: "r"(m),	/* Not "m": llock only supports reg direct addr mode */	\
-	  "ir"(nr)							\
-	: "cc");							\
-}
-
-/*
- * Semantically:
- *    Test the bit
- *    if clear
- *        set it and return 0 (old value)
- *    else
- *        return 1 (old value).
- *
- * Since ARC lacks a equivalent h/w primitive, the bit is set unconditionally
- * and the old value of bit is returned
- */
-#define TEST_N_BIT_OP(op, c_op, asm_op)					\
-static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long old, temp;					\
-									\
-	m += nr >> 5;							\
-									\
-	nr &= 0x1f;							\
-									\
-	/*								\
-	 * Explicit full memory barrier needed before/after as		\
-	 * LLOCK/SCOND themselves don't provide any such smenatic	\
-	 */								\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock       %0, [%2]	\n"				\
-	"	" #asm_op " %1, %0, %3	\n"				\
-	"	scond       %1, [%2]	\n"				\
-	"	bnz         1b		\n"				\
-	: "=&r"(old), "=&r"(temp)					\
-	: "r"(m), "ir"(nr)						\
-	: "cc");							\
-									\
-	smp_mb();							\
-									\
-	return (old & (1 << nr)) != 0;					\
-}
-
-#elif !defined(CONFIG_ARC_PLAT_EZNPS)
-
-/*
- * Non hardware assisted Atomic-R-M-W
- * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
- *
- * There's "significant" micro-optimization in writing our own variants of
- * bitops (over generic variants)
- *
- * (1) The generic APIs have "signed" @nr while we have it "unsigned"
- *     This avoids extra code to be generated for pointer arithmatic, since
- *     is "not sure" that index is NOT -ve
- * (2) Utilize the fact that ARCompact bit fidding insn (BSET/BCLR/ASL) etc
- *     only consider bottom 5 bits of @nr, so NO need to mask them off.
- *     (GCC Quirk: however for constant @nr we still need to do the masking
- *             at compile time)
- */
-
-#define BIT_OP(op, c_op, asm_op)					\
-static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long temp, flags;					\
-	m += nr >> 5;							\
-									\
-	/*								\
-	 * spin lock/unlock provide the needed smp_mb() before/after	\
-	 */								\
-	bitops_lock(flags);						\
-									\
-	temp = *m;							\
-	*m = temp c_op (1UL << (nr & 0x1f));					\
-									\
-	bitops_unlock(flags);						\
-}
-
-#define TEST_N_BIT_OP(op, c_op, asm_op)					\
-static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long old, flags;					\
-	m += nr >> 5;							\
-									\
-	bitops_lock(flags);						\
-									\
-	old = *m;							\
-	*m = old c_op (1UL << (nr & 0x1f));				\
-									\
-	bitops_unlock(flags);						\
-									\
-	return (old & (1UL << (nr & 0x1f))) != 0;			\
-}
-
-#else /* CONFIG_ARC_PLAT_EZNPS */
-
-#define BIT_OP(op, c_op, asm_op)					\
-static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	m += nr >> 5;							\
-									\
-	nr = (1UL << (nr & 0x1f));					\
-	if (asm_op == CTOP_INST_AAND_DI_R2_R2_R3)			\
-		nr = ~nr;						\
-									\
-	__asm__ __volatile__(						\
-	"	mov r2, %0\n"						\
-	"	mov r3, %1\n"						\
-	"	.word %2\n"						\
-	:								\
-	: "r"(nr), "r"(m), "i"(asm_op)					\
-	: "r2", "r3", "memory");					\
-}
-
-#define TEST_N_BIT_OP(op, c_op, asm_op)					\
-static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long old;						\
-									\
-	m += nr >> 5;							\
-									\
-	nr = old = (1UL << (nr & 0x1f));				\
-	if (asm_op == CTOP_INST_AAND_DI_R2_R2_R3)			\
-		old = ~old;						\
-									\
-	/* Explicit full memory barrier needed before/after */		\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"	mov r2, %0\n"						\
-	"	mov r3, %1\n"						\
-	"       .word %2\n"						\
-	"	mov %0, r2"						\
-	: "+r"(old)							\
-	: "r"(m), "i"(asm_op)						\
-	: "r2", "r3", "memory");					\
-									\
-	smp_mb();							\
-									\
-	return (old & nr) != 0;					\
-}
-
-#endif /* CONFIG_ARC_PLAT_EZNPS */
-
-/***************************************
- * Non atomic variants
- **************************************/
-
-#define __BIT_OP(op, c_op, asm_op)					\
-static inline void __##op##_bit(unsigned long nr, volatile unsigned long *m)	\
-{									\
-	unsigned long temp;						\
-	m += nr >> 5;							\
-									\
-	temp = *m;							\
-	*m = temp c_op (1UL << (nr & 0x1f));				\
-}
-
-#define __TEST_N_BIT_OP(op, c_op, asm_op)				\
-static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long old;						\
-	m += nr >> 5;							\
-									\
-	old = *m;							\
-	*m = old c_op (1UL << (nr & 0x1f));				\
-									\
-	return (old & (1UL << (nr & 0x1f))) != 0;			\
-}
-
-#define BIT_OPS(op, c_op, asm_op)					\
-									\
-	/* set_bit(), clear_bit(), change_bit() */			\
-	BIT_OP(op, c_op, asm_op)					\
-									\
-	/* test_and_set_bit(), test_and_clear_bit(), test_and_change_bit() */\
-	TEST_N_BIT_OP(op, c_op, asm_op)					\
-									\
-	/* __set_bit(), __clear_bit(), __change_bit() */		\
-	__BIT_OP(op, c_op, asm_op)					\
-									\
-	/* __test_and_set_bit(), __test_and_clear_bit(), __test_and_change_bit() */\
-	__TEST_N_BIT_OP(op, c_op, asm_op)
-
-#ifndef CONFIG_ARC_PLAT_EZNPS
-BIT_OPS(set, |, bset)
-BIT_OPS(clear, & ~, bclr)
-BIT_OPS(change, ^, bxor)
-#else
-BIT_OPS(set, |, CTOP_INST_AOR_DI_R2_R2_R3)
-BIT_OPS(clear, & ~, CTOP_INST_AAND_DI_R2_R2_R3)
-BIT_OPS(change, ^, CTOP_INST_AXOR_DI_R2_R2_R3)
-#endif
-
-/*
- * This routine doesn't need to be atomic.
- */
-static inline int
-test_bit(unsigned int nr, const volatile unsigned long *addr)
-{
-	unsigned long mask;
-
-	addr += nr >> 5;
-
-	mask = 1UL << (nr & 0x1f);
-
-	return ((mask & *addr) != 0);
-}
 
 #ifdef CONFIG_ISA_ARCOMPACT
 
@@ -297,10 +61,8 @@ static inline int constant_fls(unsigned int x)
 		x <<= 2;
 		r -= 2;
 	}
-	if (!(x & 0x80000000u)) {
-		x <<= 1;
+	if (!(x & 0x80000000u))
 		r -= 1;
-	}
 	return r;
 }
 
@@ -320,7 +82,7 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
 /*
  * __fls: Similar to fls, but zero based (0-31)
  */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
 	if (!x)
 		return 0;
@@ -352,7 +114,7 @@ static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word)
  * @result: [1-32]
  * fls(1) = 1, fls(0x80000000) = 32, fls(0) = 0
  */
-static inline __attribute__ ((const)) int fls(unsigned long x)
+static inline __attribute__ ((const)) int fls(unsigned int x)
 {
 	int n;
 
@@ -369,8 +131,10 @@ static inline __attribute__ ((const)) int fls(unsigned long x)
 /*
  * __fls: Similar to fls, but zero based (0-31). Also 0 if no bit set
  */
-static inline __attribute__ ((const)) int __fls(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
+	if (__builtin_constant_p(x))
+		return x ? BITS_PER_LONG - 1 - __builtin_clzl(x) : 0;
 	/* FLS insn has exactly same semantics as the API */
 	return	__builtin_arc_fls(x);
 }
@@ -379,7 +143,7 @@ static inline __attribute__ ((const)) int __fls(unsigned long x)
  * ffs = Find First Set in word (LSB to MSB)
  * @result: [1-32], 0 if all 0's
  */
-static inline __attribute__ ((const)) int ffs(unsigned long x)
+static inline __attribute__ ((const)) int ffs(unsigned int x)
 {
 	int n;
 
@@ -424,11 +188,12 @@ static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
 #include <asm-generic/bitops/fls64.h>
 #include <asm-generic/bitops/sched.h>
 #include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
 
-#include <asm-generic/bitops/find.h>
 #include <asm-generic/bitops/le.h>
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/bug.h b/arch/arc/include/asm/bug.h
index 0be19fd1a412..171c16021f70 100644
--- a/arch/arc/include/asm/bug.h
+++ b/arch/arc/include/asm/bug.h
@@ -6,14 +6,15 @@
 #ifndef _ASM_ARC_BUG_H
 #define _ASM_ARC_BUG_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/ptrace.h>
 
 struct task_struct;
 
 void show_regs(struct pt_regs *regs);
-void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs);
+void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs,
+		     const char *loglvl);
 void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
 			    unsigned long address);
 void die(const char *str, struct pt_regs *regs, unsigned long address);
@@ -28,6 +29,6 @@ void die(const char *str, struct pt_regs *regs, unsigned long address);
 
 #include <asm-generic/bug.h>
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index 918804c7c1a4..040a97f4dd82 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -23,7 +23,9 @@
  */
 #define ARC_UNCACHED_ADDR_SPACE	0xc0000000
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
+
+#include <linux/build_bug.h>
 
 /* Uncached access macros */
 #define arc_read_uncached_32(ptr)	\
@@ -60,14 +62,10 @@
 #define ARCH_SLAB_MINALIGN	8
 #endif
 
-extern void arc_cache_init(void);
-extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
-extern void read_decode_cache_bcr(void);
-
 extern int ioc_enable;
 extern unsigned long perip_base, perip_end;
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 /* Instruction cache related Auxiliary registers */
 #define ARC_REG_IC_BCR		0x77	/* Build Config reg */
diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h
index e201b4b1655a..329c94cd45d8 100644
--- a/arch/arc/include/asm/cacheflush.h
+++ b/arch/arc/include/asm/cacheflush.h
@@ -18,24 +18,18 @@
 #include <linux/mm.h>
 #include <asm/shmparam.h>
 
-/*
- * Semantically we need this because icache doesn't snoop dcache/dma.
- * However ARC Cache flush requires paddr as well as vaddr, latter not available
- * in the flush_icache_page() API. So we no-op it but do the equivalent work
- * in update_mmu_cache()
- */
-#define flush_icache_page(vma, page)
-
 void flush_cache_all(void);
 
 void flush_icache_range(unsigned long kstart, unsigned long kend);
 void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len);
-void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr);
-void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr);
+void __inv_icache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr);
+void __flush_dcache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr);
 
 #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 
 void flush_dcache_page(struct page *page);
+void flush_dcache_folio(struct folio *folio);
+#define flush_dcache_folio flush_dcache_folio
 
 void dma_cache_wback_inv(phys_addr_t start, unsigned long sz);
 void dma_cache_inv(phys_addr_t start, unsigned long sz);
@@ -46,35 +40,15 @@ void dma_cache_wback(phys_addr_t start, unsigned long sz);
 
 /* TBD: optimize this */
 #define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vmap_early(start, end)	do { } while (0)
 #define flush_cache_vunmap(start, end)		flush_cache_all()
 
 #define flush_cache_dup_mm(mm)			/* called on fork (VIVT only) */
 
-#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING
-
 #define flush_cache_mm(mm)			/* called on munmap/exit */
 #define flush_cache_range(mm, u_vstart, u_vend)
 #define flush_cache_page(vma, u_vaddr, pfn)	/* PF handling/COW-break */
 
-#else	/* VIPT aliasing dcache */
-
-/* To clear out stale userspace mappings */
-void flush_cache_mm(struct mm_struct *mm);
-void flush_cache_range(struct vm_area_struct *vma,
-	unsigned long start,unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma,
-	unsigned long user_addr, unsigned long page);
-
-/*
- * To make sure that userspace mapping is flushed to memory before
- * get_user_pages() uses a kernel mapping to access the page
- */
-#define ARCH_HAS_FLUSH_ANON_PAGE
-void flush_anon_page(struct vm_area_struct *vma,
-	struct page *page, unsigned long u_vaddr);
-
-#endif	/* CONFIG_ARC_CACHE_VIPT_ALIASING */
-
 /*
  * A new pagecache page has PG_arch_1 clear - thus dcache dirty by default
  * This works around some PIO based drivers which don't call flush_dcache_page
@@ -82,28 +56,6 @@ void flush_anon_page(struct vm_area_struct *vma,
  */
 #define PG_dc_clean	PG_arch_1
 
-#define CACHE_COLORS_NUM	4
-#define CACHE_COLORS_MSK	(CACHE_COLORS_NUM - 1)
-#define CACHE_COLOR(addr)	(((unsigned long)(addr) >> (PAGE_SHIFT)) & CACHE_COLORS_MSK)
-
-/*
- * Simple wrapper over config option
- * Bootup code ensures that hardware matches kernel configuration
- */
-static inline int cache_is_vipt_aliasing(void)
-{
-	return IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
-}
-
-/*
- * checks if two addresses (after page aligning) index into same cache set
- */
-#define addr_not_cache_congruent(addr1, addr2)				\
-({									\
-	cache_is_vipt_aliasing() ? 					\
-		(CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0;		\
-})
-
 #define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
 do {									\
 	memcpy(dst, src, len);						\
diff --git a/arch/arc/include/asm/cachetype.h b/arch/arc/include/asm/cachetype.h
new file mode 100644
index 000000000000..acd3b6cb4bf5
--- /dev/null
+++ b/arch/arc/include/asm/cachetype.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARC_CACHETYPE_H
+#define __ASM_ARC_CACHETYPE_H
+
+#define cpu_dcache_is_aliasing()	false
+#define cpu_icache_is_aliasing()	true
+
+#endif
diff --git a/arch/arc/include/asm/checksum.h b/arch/arc/include/asm/checksum.h
index 69debd77cd04..0b485800a392 100644
--- a/arch/arc/include/asm/checksum.h
+++ b/arch/arc/include/asm/checksum.h
@@ -24,7 +24,7 @@
  */
 static inline __sum16 csum_fold(__wsum s)
 {
-	unsigned r = s << 16 | s >> 16;	/* ror */
+	unsigned int r = s << 16 | s >> 16;	/* ror */
 	s = ~s;
 	s -= r;
 	return s >> 16;
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
index c11398160240..76f43db0890f 100644
--- a/arch/arc/include/asm/cmpxchg.h
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -6,219 +6,140 @@
 #ifndef __ASM_ARC_CMPXCHG_H
 #define __ASM_ARC_CMPXCHG_H
 
+#include <linux/build_bug.h>
 #include <linux/types.h>
+#include <linux/cmpxchg-emu.h>
 
 #include <asm/barrier.h>
 #include <asm/smp.h>
 
 #ifdef CONFIG_ARC_HAS_LLSC
 
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
-{
-	unsigned long prev;
-
-	/*
-	 * Explicit full memory barrier needed before/after as
-	 * LLOCK/SCOND thmeselves don't provide any such semantics
-	 */
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llock   %0, [%1]	\n"
-	"	brne    %0, %2, 2f	\n"
-	"	scond   %3, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(prev)	/* Early clobber, to prevent reg reuse */
-	: "r"(ptr),	/* Not "m": llock only supports reg direct addr mode */
-	  "ir"(expected),
-	  "r"(new)	/* can't be "ir". scond can't take LIMM for "b" */
-	: "cc", "memory"); /* so that gcc knows memory is being written here */
-
-	smp_mb();
-
-	return prev;
-}
-
-#elif !defined(CONFIG_ARC_PLAT_EZNPS)
-
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
-{
-	unsigned long flags;
-	int prev;
-	volatile unsigned long *p = ptr;
-
-	/*
-	 * spin lock/unlock provide the needed smp_mb() before/after
-	 */
-	atomic_ops_lock(flags);
-	prev = *p;
-	if (prev == expected)
-		*p = new;
-	atomic_ops_unlock(flags);
-	return prev;
-}
-
-#else /* CONFIG_ARC_PLAT_EZNPS */
-
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
-{
-	/*
-	 * Explicit full memory barrier needed before/after
-	 */
-	smp_mb();
-
-	write_aux_reg(CTOP_AUX_GPA1, expected);
-
-	__asm__ __volatile__(
-	"	mov r2, %0\n"
-	"	mov r3, %1\n"
-	"	.word %2\n"
-	"	mov %0, r2"
-	: "+r"(new)
-	: "r"(ptr), "i"(CTOP_INST_EXC_DI_R2_R2_R3)
-	: "r2", "r3", "memory");
-
-	smp_mb();
-
-	return new;
-}
-
-#endif /* CONFIG_ARC_HAS_LLSC */
-
-#define cmpxchg(ptr, o, n) ({				\
-	(typeof(*(ptr)))__cmpxchg((ptr),		\
-				  (unsigned long)(o),	\
-				  (unsigned long)(n));	\
-})
-
-/*
- * atomic_cmpxchg is same as cmpxchg
- *   LLSC: only different in data-type, semantics are exactly same
- *  !LLSC: cmpxchg() has to use an external lock atomic_ops_lock to guarantee
- *         semantics, and this lock also happens to be used by atomic_*()
- */
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-
-
-#ifndef CONFIG_ARC_PLAT_EZNPS
-
 /*
- * xchg (reg with memory) based on "Native atomic" EX insn
+ * if (*ptr == @old)
+ *      *ptr = @new
  */
-static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
-				   int size)
-{
-	extern unsigned long __xchg_bad_pointer(void);
-
-	switch (size) {
-	case 4:
-		smp_mb();
+#define __cmpxchg(ptr, old, new)					\
+({									\
+	__typeof__(*(ptr)) _prev;					\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock  %0, [%1]	\n"					\
+	"	brne   %0, %2, 2f	\n"				\
+	"	scond  %3, [%1]	\n"					\
+	"	bnz     1b		\n"				\
+	"2:				\n"				\
+	: "=&r"(_prev)	/* Early clobber prevent reg reuse */		\
+	: "r"(ptr),	/* Not "m": llock only supports reg */		\
+	  "ir"(old),							\
+	  "r"(new)	/* Not "ir": scond can't take LIMM */		\
+	: "cc",								\
+	  "memory");	/* gcc knows memory is clobbered */		\
+									\
+	_prev;								\
+})
 
-		__asm__ __volatile__(
-		"	ex  %0, [%1]	\n"
-		: "+r"(val)
-		: "r"(ptr)
-		: "memory");
+#define arch_cmpxchg_relaxed(ptr, old, new)				\
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _o_ = (old);					\
+	__typeof__(*(ptr)) _n_ = (new);					\
+	__typeof__(*(ptr)) _prev_;					\
+									\
+	switch(sizeof((_p_))) {						\
+	case 1:								\
+		_prev_ = (__typeof__(*(ptr)))cmpxchg_emu_u8((volatile u8 *__force)_p_, (uintptr_t)_o_, (uintptr_t)_n_);	\
+		break;							\
+	case 4:								\
+		_prev_ = __cmpxchg(_p_, _o_, _n_);			\
+		break;							\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+	_prev_;								\
+})
 
-		smp_mb();
+#else
 
-		return val;
-	}
-	return __xchg_bad_pointer();
-}
+#define arch_cmpxchg(ptr, old, new)				        \
+({									\
+	volatile __typeof__(ptr) _p_ = (ptr);				\
+	__typeof__(*(ptr)) _o_ = (old);					\
+	__typeof__(*(ptr)) _n_ = (new);					\
+	__typeof__(*(ptr)) _prev_;					\
+	unsigned long __flags;						\
+									\
+	/*								\
+	 * spin lock/unlock provide the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(__flags);					\
+	_prev_ = *_p_;							\
+	if (_prev_ == _o_)						\
+		*_p_ = _n_;						\
+	atomic_ops_unlock(__flags);					\
+	_prev_;								\
+})
 
-#define _xchg(ptr, with) ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), \
-						 sizeof(*(ptr))))
+#endif
 
 /*
- * xchg() maps directly to ARC EX instruction which guarantees atomicity.
- * However in !LLSC config, it also needs to be use @atomic_ops_lock spinlock
- * due to a subtle reason:
- *  - For !LLSC, cmpxchg() needs to use that lock (see above) and there is lot
- *    of  kernel code which calls xchg()/cmpxchg() on same data (see llist.h)
- *    Hence xchg() needs to follow same locking rules.
- *
- * Technically the lock is also needed for UP (boils down to irq save/restore)
- * but we can cheat a bit since cmpxchg() atomic_ops_lock() would cause irqs to
- * be disabled thus can't possibly be interrpted/preempted/clobbered by xchg()
- * Other way around, xchg is one instruction anyways, so can't be interrupted
- * as such
+ * xchg
  */
+#ifdef CONFIG_ARC_HAS_LLSC
 
-#if !defined(CONFIG_ARC_HAS_LLSC) && defined(CONFIG_SMP)
-
-#define xchg(ptr, with)			\
-({					\
-	unsigned long flags;		\
-	typeof(*(ptr)) old_val;		\
-					\
-	atomic_ops_lock(flags);		\
-	old_val = _xchg(ptr, with);	\
-	atomic_ops_unlock(flags);	\
-	old_val;			\
+#define __arch_xchg(ptr, val)						\
+({									\
+	__asm__ __volatile__(						\
+	"	ex  %0, [%1]	\n"	/* set new value */	        \
+	: "+r"(val)							\
+	: "r"(ptr)							\
+	: "memory");							\
+	_val_;		/* get old value */				\
 })
 
-#else
-
-#define xchg(ptr, with)  _xchg(ptr, with)
-
-#endif
-
-#else /* CONFIG_ARC_PLAT_EZNPS */
-
-static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
-				   int size)
-{
-	extern unsigned long __xchg_bad_pointer(void);
-
-	switch (size) {
-	case 4:
-		/*
-		 * Explicit full memory barrier needed before/after
-		 */
-		smp_mb();
-
-		__asm__ __volatile__(
-		"	mov r2, %0\n"
-		"	mov r3, %1\n"
-		"	.word %2\n"
-		"	mov %0, r2\n"
-		: "+r"(val)
-		: "r"(ptr), "i"(CTOP_INST_XEX_DI_R2_R2_R3)
-		: "r2", "r3", "memory");
-
-		smp_mb();
-
-		return val;
-	}
-	return __xchg_bad_pointer();
-}
-
-#define xchg(ptr, with) ({				\
-	(typeof(*(ptr)))__xchg((unsigned long)(with),	\
-			       (ptr),			\
-			       sizeof(*(ptr)));		\
+#define arch_xchg_relaxed(ptr, val)					\
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _val_ = (val);				\
+									\
+	switch(sizeof(*(_p_))) {					\
+	case 4:								\
+		_val_ = __arch_xchg(_p_, _val_);			\
+		break;							\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+	_val_;								\
 })
 
-#endif /* CONFIG_ARC_PLAT_EZNPS */
+#else  /* !CONFIG_ARC_HAS_LLSC */
 
 /*
- * "atomic" variant of xchg()
- * REQ: It needs to follow the same serialization rules as other atomic_xxx()
- * Since xchg() doesn't always do that, it would seem that following defintion
- * is incorrect. But here's the rationale:
- *   SMP : Even xchg() takes the atomic_ops_lock, so OK.
- *   LLSC: atomic_ops_lock are not relevant at all (even if SMP, since LLSC
- *         is natively "SMP safe", no serialization required).
- *   UP  : other atomics disable IRQ, so no way a difft ctxt atomic_xchg()
- *         could clobber them. atomic_xchg() itself would be 1 insn, so it
- *         can't be clobbered by others. Thus no serialization required when
- *         atomic_xchg is involved.
+ * EX instructions is baseline and present in !LLSC too. But in this
+ * regime it still needs use @atomic_ops_lock spinlock to allow interop
+ * with cmpxchg() which uses spinlock in !LLSC
+ * (llist.h use xchg and cmpxchg on sama data)
  */
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+#define arch_xchg(ptr, val)					        \
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _val_ = (val);				\
+									\
+	unsigned long __flags;						\
+									\
+	atomic_ops_lock(__flags);					\
+									\
+	__asm__ __volatile__(						\
+	"	ex  %0, [%1]	\n"					\
+	: "+r"(_val_)							\
+	: "r"(_p_)							\
+	: "memory");							\
+									\
+	atomic_ops_unlock(__flags);					\
+	_val_;								\
+})
+
+#endif
 
 #endif
diff --git a/arch/arc/include/asm/current.h b/arch/arc/include/asm/current.h
index 9b9bdd3e6538..03ffd005f3fa 100644
--- a/arch/arc/include/asm/current.h
+++ b/arch/arc/include/asm/current.h
@@ -9,17 +9,17 @@
 #ifndef _ASM_ARC_CURRENT_H
 #define _ASM_ARC_CURRENT_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_ARC_CURR_IN_REG
 
-register struct task_struct *curr_arc asm("r25");
+register struct task_struct *curr_arc asm("gp");
 #define current (curr_arc)
 
 #else
 #include <asm-generic/current.h>
 #endif /* ! CONFIG_ARC_CURR_IN_REG */
 
-#endif /* ! __ASSEMBLY__ */
+#endif /* ! __ASSEMBLER__ */
 
 #endif /* _ASM_ARC_CURRENT_H */
diff --git a/arch/arc/include/asm/dma.h b/arch/arc/include/asm/dma.h
index 5b744f4b10a7..02431027ed2f 100644
--- a/arch/arc/include/asm/dma.h
+++ b/arch/arc/include/asm/dma.h
@@ -7,10 +7,5 @@
 #define ASM_ARC_DMA_H
 
 #define MAX_DMA_ADDRESS 0xC0000000
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy	0
-#endif
 
 #endif
diff --git a/arch/arc/include/asm/dsp-impl.h b/arch/arc/include/asm/dsp-impl.h
new file mode 100644
index 000000000000..fd5fdaad90c1
--- /dev/null
+++ b/arch/arc/include/asm/dsp-impl.h
@@ -0,0 +1,152 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ */
+#ifndef __ASM_ARC_DSP_IMPL_H
+#define __ASM_ARC_DSP_IMPL_H
+
+#include <asm/dsp.h>
+
+#define DSP_CTRL_DISABLED_ALL		0
+
+#ifdef __ASSEMBLER__
+
+/* clobbers r5 register */
+.macro DSP_EARLY_INIT
+#ifdef CONFIG_ISA_ARCV2
+	lr	r5, [ARC_AUX_DSP_BUILD]
+	bmsk	r5, r5, 7
+	breq    r5, 0, 1f
+	mov	r5, DSP_CTRL_DISABLED_ALL
+	sr	r5, [ARC_AUX_DSP_CTRL]
+1:
+#endif
+.endm
+
+/* clobbers r10, r11 registers pair */
+.macro DSP_SAVE_REGFILE_IRQ
+#if defined(CONFIG_ARC_DSP_KERNEL)
+	/*
+	 * Drop any changes to DSP_CTRL made by userspace so userspace won't be
+	 * able to break kernel - reset it to DSP_CTRL_DISABLED_ALL value
+	 */
+	mov	r10, DSP_CTRL_DISABLED_ALL
+	sr	r10, [ARC_AUX_DSP_CTRL]
+
+#elif defined(CONFIG_ARC_DSP_SAVE_RESTORE_REGS)
+	/*
+	 * Save DSP_CTRL register and reset it to value suitable for kernel
+	 * (DSP_CTRL_DISABLED_ALL)
+	 */
+	mov	r10, DSP_CTRL_DISABLED_ALL
+	aex	r10, [ARC_AUX_DSP_CTRL]
+	st	r10, [sp, PT_DSP_CTRL]
+
+#endif
+.endm
+
+/* clobbers r10, r11 registers pair */
+.macro DSP_RESTORE_REGFILE_IRQ
+#if defined(CONFIG_ARC_DSP_SAVE_RESTORE_REGS)
+	ld	r10, [sp, PT_DSP_CTRL]
+	sr	r10, [ARC_AUX_DSP_CTRL]
+
+#endif
+.endm
+
+#else /* __ASEMBLY__ */
+
+#include <linux/sched.h>
+#include <asm/asserts.h>
+#include <asm/switch_to.h>
+
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+
+/*
+ * As we save new and restore old AUX register value in the same place we
+ * can optimize a bit and use AEX instruction (swap contents of an auxiliary
+ * register with a core register) instead of LR + SR pair.
+ */
+#define AUX_SAVE_RESTORE(_saveto, _readfrom, _offt, _aux)		\
+do {									\
+	long unsigned int _scratch;					\
+									\
+	__asm__ __volatile__(						\
+		"ld	%0, [%2, %4]			\n"		\
+		"aex	%0, [%3]			\n"		\
+		"st	%0, [%1, %4]			\n"		\
+		:							\
+		  "=&r" (_scratch)	/* must be early clobber */	\
+		:							\
+		   "r" (_saveto),					\
+		   "r" (_readfrom),					\
+		   "Ir" (_aux),						\
+		   "Ir" (_offt)						\
+		:							\
+		  "memory"						\
+	);								\
+} while (0)
+
+#define DSP_AUX_SAVE_RESTORE(_saveto, _readfrom, _aux)			\
+	AUX_SAVE_RESTORE(_saveto, _readfrom,				\
+		offsetof(struct dsp_callee_regs, _aux),			\
+		ARC_AUX_##_aux)
+
+static inline void dsp_save_restore(struct task_struct *prev,
+					struct task_struct *next)
+{
+	long unsigned int *saveto = &prev->thread.dsp.ACC0_GLO;
+	long unsigned int *readfrom = &next->thread.dsp.ACC0_GLO;
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, ACC0_GLO);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, ACC0_GHI);
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, DSP_BFLY0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, DSP_FFT_CTRL);
+
+#ifdef CONFIG_ARC_DSP_AGU_USERSPACE
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP1);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP2);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP3);
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_OS0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_OS1);
+
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD0);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD1);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD2);
+	DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD3);
+#endif /* CONFIG_ARC_DSP_AGU_USERSPACE */
+}
+
+#else /* !CONFIG_ARC_DSP_SAVE_RESTORE_REGS */
+#define dsp_save_restore(p, n)
+#endif /* CONFIG_ARC_DSP_SAVE_RESTORE_REGS */
+
+static inline bool dsp_exist(void)
+{
+	struct bcr_generic bcr;
+
+	READ_BCR(ARC_AUX_DSP_BUILD, bcr);
+	return !!bcr.ver;
+}
+
+static inline bool agu_exist(void)
+{
+	struct bcr_generic bcr;
+
+	READ_BCR(ARC_AUX_AGU_BUILD, bcr);
+	return !!bcr.ver;
+}
+
+static inline void dsp_config_check(void)
+{
+	CHK_OPT_STRICT(CONFIG_ARC_DSP_HANDLED, dsp_exist());
+	CHK_OPT_WEAK(CONFIG_ARC_DSP_AGU_USERSPACE, agu_exist());
+}
+
+#endif /* __ASEMBLY__ */
+#endif /* __ASM_ARC_DSP_IMPL_H */
diff --git a/arch/arc/include/asm/dsp.h b/arch/arc/include/asm/dsp.h
new file mode 100644
index 000000000000..eeaaf4e4eabd
--- /dev/null
+++ b/arch/arc/include/asm/dsp.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ */
+#ifndef __ASM_ARC_DSP_H
+#define __ASM_ARC_DSP_H
+
+#ifndef __ASSEMBLER__
+
+/*
+ * DSP-related saved registers - need to be saved only when you are
+ * scheduled out.
+ * structure fields name must correspond to aux register definitions for
+ * automatic offset calculation in DSP_AUX_SAVE_RESTORE macros
+ */
+struct dsp_callee_regs {
+	unsigned long ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_FFT_CTRL;
+#ifdef CONFIG_ARC_DSP_AGU_USERSPACE
+	unsigned long AGU_AP0, AGU_AP1, AGU_AP2, AGU_AP3;
+	unsigned long AGU_OS0, AGU_OS1;
+	unsigned long AGU_MOD0, AGU_MOD1, AGU_MOD2, AGU_MOD3;
+#endif
+};
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __ASM_ARC_DSP_H */
diff --git a/arch/arc/include/asm/dwarf.h b/arch/arc/include/asm/dwarf.h
index 5f4de05bd4ee..1524c5cf8b59 100644
--- a/arch/arc/include/asm/dwarf.h
+++ b/arch/arc/include/asm/dwarf.h
@@ -6,30 +6,38 @@
 #ifndef _ASM_ARC_DWARF_H
 #define _ASM_ARC_DWARF_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef ARC_DW2_UNWIND_AS_CFI
 
-#define CFI_STARTPROC	.cfi_startproc
-#define CFI_ENDPROC	.cfi_endproc
-#define CFI_DEF_CFA	.cfi_def_cfa
-#define CFI_REGISTER	.cfi_register
-#define CFI_REL_OFFSET	.cfi_rel_offset
-#define CFI_UNDEFINED	.cfi_undefined
+#define CFI_STARTPROC		.cfi_startproc
+#define CFI_ENDPROC		.cfi_endproc
+#define CFI_DEF_CFA		.cfi_def_cfa
+#define CFI_DEF_CFA_OFFSET	.cfi_def_cfa_offset
+#define CFI_DEF_CFA_REGISTER	.cfi_def_cfa_register
+#define CFI_OFFSET		.cfi_offset
+#define CFI_REL_OFFSET		.cfi_rel_offset
+#define CFI_REGISTER		.cfi_register
+#define CFI_RESTORE		.cfi_restore
+#define CFI_UNDEFINED		.cfi_undefined
 
 #else
 
 #define CFI_IGNORE	#
 
-#define CFI_STARTPROC	CFI_IGNORE
-#define CFI_ENDPROC	CFI_IGNORE
-#define CFI_DEF_CFA	CFI_IGNORE
-#define CFI_REGISTER	CFI_IGNORE
-#define CFI_REL_OFFSET	CFI_IGNORE
-#define CFI_UNDEFINED	CFI_IGNORE
+#define CFI_STARTPROC		CFI_IGNORE
+#define CFI_ENDPROC		CFI_IGNORE
+#define CFI_DEF_CFA		CFI_IGNORE
+#define CFI_DEF_CFA_OFFSET	CFI_IGNORE
+#define CFI_DEF_CFA_REGISTER	CFI_IGNORE
+#define CFI_OFFSET		CFI_IGNORE
+#define CFI_REL_OFFSET		CFI_IGNORE
+#define CFI_REGISTER		CFI_IGNORE
+#define CFI_RESTORE		CFI_IGNORE
+#define CFI_UNDEFINED		CFI_IGNORE
 
 #endif	/* !ARC_DW2_UNWIND_AS_CFI */
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif	/* _ASM_ARC_DWARF_H */
diff --git a/arch/arc/include/asm/elf.h b/arch/arc/include/asm/elf.h
index c77a0e3671ac..0284ace0e1ab 100644
--- a/arch/arc/include/asm/elf.h
+++ b/arch/arc/include/asm/elf.h
@@ -19,7 +19,7 @@
 #define  R_ARC_32_PCREL		0x31
 
 /*to set parameters in the core dumps */
-#define ELF_ARCH		EM_ARCOMPACT
+#define ELF_ARCH		EM_ARC_INUSE
 #define ELF_CLASS		ELFCLASS32
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h
index 41b16f21beec..3802a2daaf86 100644
--- a/arch/arc/include/asm/entry-arcv2.h
+++ b/arch/arc/include/asm/entry-arcv2.h
@@ -4,6 +4,7 @@
 #define __ASM_ARC_ENTRY_ARCV2_H
 
 #include <asm/asm-offsets.h>
+#include <asm/dsp-impl.h>
 #include <asm/irqflags-arcv2.h>
 #include <asm/thread_info.h>	/* For THREAD_SIZE */
 
@@ -17,7 +18,6 @@
  *              |      orig_r0      |
  *              |      event/ECR    |
  *              |      bta          |
- *              |      user_r25     |
  *              |      gp           |
  *              |      fp           |
  *              |      sp           |
@@ -48,14 +48,18 @@
 /*------------------------------------------------------------------------*/
 .macro INTERRUPT_PROLOGUE
 
-	; (A) Before jumping to Interrupt Vector, hardware micro-ops did following:
+	; Before jumping to Interrupt Vector, hardware micro-ops did following:
 	;   1. SP auto-switched to kernel mode stack
 	;   2. STATUS32.Z flag set if in U mode at time of interrupt (U:1,K:0)
 	;   3. Auto save: (mandatory) Push PC and STAT32 on stack
 	;                 hardware does even if CONFIG_ARC_IRQ_NO_AUTOSAVE
-	;   4. Auto save: (optional) r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI
+	;  4a. Auto save: (optional) r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI
 	;
-	; (B) Manually saved some regs: r12,r25,r30, sp,fp,gp, ACCL pair
+	; Now
+	;  4b. If Auto-save (optional) not enabled in hw, manually save them
+	;   5. Manually save: r12,r30, sp,fp,gp, ACCL pair
+	;
+	; At the end, SP points to pt_regs
 
 #ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
 	; carve pt_regs on stack (case #3), PC/STAT32 already on stack
@@ -71,15 +75,16 @@
 .endm
 
 /*------------------------------------------------------------------------*/
-.macro EXCEPTION_PROLOGUE
+.macro EXCEPTION_PROLOGUE_KEEP_AE
 
-	; (A) Before jumping to Exception Vector, hardware micro-ops did following:
+	; Before jumping to Exception Vector, hardware micro-ops did following:
 	;   1. SP auto-switched to kernel mode stack
 	;   2. STATUS32.Z flag set if in U mode at time of exception (U:1,K:0)
 	;
-	; (B) Manually save the complete reg file below
+	; Now manually save rest of reg file
+	; At the end, SP points to pt_regs
 
-	sub	sp, sp, SZ_PT_REGS	; carve pt_regs
+	sub	sp, sp, SZ_PT_REGS	; carve space for pt_regs
 
 	; _HARD saves r10 clobbered by _SOFT as scratch hence comes first
 
@@ -99,6 +104,16 @@
 	; OUTPUT: r10 has ECR expected by EV_Trap
 .endm
 
+.macro EXCEPTION_PROLOGUE
+
+	EXCEPTION_PROLOGUE_KEEP_AE	; return ECR in r10
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN		; clobbers r9
+.endm
+
 /*------------------------------------------------------------------------
  * This macro saves the registers manually which would normally be autosaved
  * by hardware on taken interrupts. It is used by
@@ -134,10 +149,10 @@
  */
 .macro __SAVE_REGFILE_SOFT
 
-	ST2	gp, fp, PT_r26		; gp (r26), fp (r27)
-
-	st	r12, [sp, PT_sp + 4]
-	st	r30, [sp, PT_sp + 8]
+	st	fp,  [sp, PT_fp]	; r27
+	st	r30, [sp, PT_r30]
+	st	r12, [sp, PT_r12]
+	st	r26, [sp, PT_r26]	; gp
 
 	; Saving pt_regs->sp correctly requires some extra work due to the way
 	; Auto stack switch works
@@ -152,17 +167,19 @@
 
 	; ISA requires ADD.nz to have same dest and src reg operands
 	mov.nz	r10, sp
-	add.nz	r10, r10, SZ_PT_REGS	; K mode SP
+	add2.nz	r10, r10, SZ_PT_REGS/4	; K mode SP
 
 	st	r10, [sp, PT_sp]	; SP (pt_regs->sp)
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	st	r25, [sp, PT_user_r25]
-	GET_CURR_TASK_ON_CPU	r25
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	ST2	r58, r59, PT_r58
 #endif
 
-#ifdef CONFIG_ARC_HAS_ACCL_REGS
-	ST2	r58, r59, PT_sp + 12
+	/* clobbers r10, r11 registers pair */
+	DSP_SAVE_REGFILE_IRQ
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	GET_CURR_TASK_ON_CPU	gp
 #endif
 
 .endm
@@ -170,10 +187,10 @@
 /*------------------------------------------------------------------------*/
 .macro __RESTORE_REGFILE_SOFT
 
-	LD2	gp, fp, PT_r26		; gp (r26), fp (r27)
-
-	ld	r12, [sp, PT_sp + 4]
-	ld	r30, [sp, PT_sp + 8]
+	ld	fp,  [sp, PT_fp]
+	ld	r30, [sp, PT_r30]
+	ld	r12, [sp, PT_r12]
+	ld	r26, [sp, PT_r26]
 
 	; Restore SP (into AUX_USER_SP) only if returning to U mode
 	;  - for K mode, it will be implicitly restored as stack is unwound
@@ -185,12 +202,11 @@
 	sr	r10, [AUX_USER_SP]
 1:
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	ld	r25, [sp, PT_user_r25]
-#endif
+	/* clobbers r10, r11 registers pair */
+	DSP_RESTORE_REGFILE_IRQ
 
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
-	LD2	r58, r59, PT_sp + 12
+	LD2	r58, r59, PT_r58
 #endif
 .endm
 
@@ -227,6 +243,8 @@
 
 #ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
 	__RESTORE_REGFILE_HARD
+
+	; SP points to PC/STAT32: hw restores them despite NO_AUTOSAVE
 	add	sp, sp, SZ_PT_REGS - 8
 #else
 	add	sp, sp, PT_r0
@@ -241,7 +259,7 @@
 
 	btst	r0, STATUS_U_BIT	; Z flag set if K, used in restoring SP
 
-	ld	r10, [sp, PT_event + 4]
+	ld	r10, [sp, PT_bta]
 	sr	r10, [erbta]
 
 	LD2	r10, r11, PT_ret
@@ -256,8 +274,8 @@
 
 .macro FAKE_RET_FROM_EXCPN
 	lr      r9, [status32]
-	bic     r9, r9, STATUS_AE_MASK
-	or      r9, r9, STATUS_IE_MASK
+	bclr    r9, r9, STATUS_AE_BIT
+	bset    r9, r9, STATUS_IE_BIT
 	kflag   r9
 .endm
 
@@ -273,4 +291,36 @@
 				/* M = 8-1  N = 8 */
 .endm
 
+.macro SAVE_ABI_CALLEE_REGS
+	push	r13
+	push	r14
+	push	r15
+	push	r16
+	push	r17
+	push	r18
+	push	r19
+	push	r20
+	push	r21
+	push	r22
+	push	r23
+	push	r24
+	push	r25
+.endm
+
+.macro RESTORE_ABI_CALLEE_REGS
+	pop	r25
+	pop	r24
+	pop	r23
+	pop	r22
+	pop	r21
+	pop	r20
+	pop	r19
+	pop	r18
+	pop	r17
+	pop	r16
+	pop	r15
+	pop	r14
+	pop	r13
+.endm
+
 #endif
diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h
index 66a292335ee6..00946fe04c9b 100644
--- a/arch/arc/include/asm/entry-compact.h
+++ b/arch/arc/include/asm/entry-compact.h
@@ -7,7 +7,7 @@
  *  Stack switching code can no longer reliably rely on the fact that
  *  if we are NOT in user mode, stack is switched to kernel mode.
  *  e.g. L2 IRQ interrupted a L1 ISR which had not yet completed
- *  it's prologue including stack switching from user mode
+ *  its prologue including stack switching from user mode
  *
  * Vineetg: Aug 28th 2008: Bug #94984
  *  -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
@@ -21,7 +21,7 @@
  *      r25 contains the kernel current task ptr
  *  - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
  *  - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
- *      address Write back load ld.ab instead of seperate ld/add instn
+ *      address Write back load ld.ab instead of separate ld/add instn
  *
  * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
  */
@@ -33,9 +33,90 @@
 #include <asm/irqflags-compact.h>
 #include <asm/thread_info.h>	/* For THREAD_SIZE */
 
-#ifdef CONFIG_ARC_PLAT_EZNPS
-#include <plat/ctop.h>
-#endif
+/* Note on the LD/ST addr modes with addr reg wback
+ *
+ * LD.a same as LD.aw
+ *
+ * LD.a    reg1, [reg2, x]  => Pre Incr
+ *      Eff Addr for load = [reg2 + x]
+ *
+ * LD.ab   reg1, [reg2, x]  => Post Incr
+ *      Eff Addr for load = [reg2]
+ */
+
+.macro PUSHAX aux
+	lr	r9, [\aux]
+	push	r9
+.endm
+
+.macro POPAX aux
+	pop	r9
+	sr	r9, [\aux]
+.endm
+
+.macro  SAVE_R0_TO_R12
+	push	r0
+	push	r1
+	push	r2
+	push	r3
+	push	r4
+	push	r5
+	push	r6
+	push	r7
+	push	r8
+	push	r9
+	push	r10
+	push	r11
+	push	r12
+.endm
+
+.macro RESTORE_R12_TO_R0
+	pop	r12
+	pop	r11
+	pop	r10
+	pop	r9
+	pop	r8
+	pop	r7
+	pop	r6
+	pop	r5
+	pop	r4
+	pop	r3
+	pop	r2
+	pop	r1
+	pop	r0
+.endm
+
+.macro SAVE_ABI_CALLEE_REGS
+	push	r13
+	push	r14
+	push	r15
+	push	r16
+	push	r17
+	push	r18
+	push	r19
+	push	r20
+	push	r21
+	push	r22
+	push	r23
+	push	r24
+	push	r25
+.endm
+
+.macro RESTORE_ABI_CALLEE_REGS
+	pop	r25
+	pop	r24
+	pop	r23
+	pop	r22
+	pop	r21
+	pop	r20
+	pop	r19
+	pop	r18
+	pop	r17
+	pop	r16
+	pop	r15
+	pop	r14
+	pop	r13
+.endm
 
 /*--------------------------------------------------------------
  * Switch to Kernel Mode stack if SP points to User Mode stack
@@ -62,7 +143,7 @@
 	 * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode)
 	 * 3. But before it could switch SP from USER to KERNEL stack
 	 *      a L2 IRQ "Interrupts" L1
-	 * Thay way although L2 IRQ happened in Kernel mode, stack is still
+	 * That way although L2 IRQ happened in Kernel mode, stack is still
 	 * not switched.
 	 * To handle this, we may need to switch stack even if in kernel mode
 	 * provided SP has values in range of USER mode stack ( < 0x7000_0000 )
@@ -92,7 +173,7 @@
 
 	GET_CURR_TASK_ON_CPU   r9
 
-	/* With current tsk in r9, get it's kernel mode stack base */
+	/* With current tsk in r9, get its kernel mode stack base */
 	GET_TSK_STACK_BASE  r9, r9
 
 	/* save U mode SP @ pt_regs->sp */
@@ -130,19 +211,11 @@
  * to be saved again on kernel mode stack, as part of pt_regs.
  *-------------------------------------------------------------*/
 .macro PROLOG_FREEUP_REG	reg, mem
-#ifdef CONFIG_SMP
-	sr  \reg, [ARC_REG_SCRATCH_DATA0]
-#else
 	st  \reg, [\mem]
-#endif
 .endm
 
 .macro PROLOG_RESTORE_REG	reg, mem
-#ifdef CONFIG_SMP
-	lr  \reg, [ARC_REG_SCRATCH_DATA0]
-#else
 	ld  \reg, [\mem]
-#endif
 .endm
 
 /*--------------------------------------------------------------
@@ -152,7 +225,7 @@
  *
  * After this it is safe to call the "C" handlers
  *-------------------------------------------------------------*/
-.macro EXCEPTION_PROLOGUE
+.macro EXCEPTION_PROLOGUE_KEEP_AE
 
 	/* Need at least 1 reg to code the early exception prologue */
 	PROLOG_FREEUP_REG r9, @ex_saved_reg1
@@ -163,14 +236,6 @@
 	/* ARC700 doesn't provide auto-stack switching */
 	SWITCH_TO_KERNEL_STK
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	/* Treat r25 as scratch reg (save on stack) and load with "current" */
-	PUSH    r25
-	GET_CURR_TASK_ON_CPU   r25
-#else
-	sub     sp, sp, 4
-#endif
-
 	st.a	r0, [sp, -8]    /* orig_r0 needed for syscall (skip ECR slot) */
 	sub	sp, sp, 4	/* skip pt_regs->sp, already saved above */
 
@@ -189,14 +254,24 @@
 	PUSHAX	lp_start
 	PUSHAX	erbta
 
-#ifdef CONFIG_ARC_PLAT_EZNPS
-	.word CTOP_INST_SCHD_RW
-	PUSHAX  CTOP_AUX_GPA1
-	PUSHAX  CTOP_AUX_EFLAGS
+	lr	r10, [ecr]
+	st      r10, [sp, PT_event]
+
+#ifdef CONFIG_ARC_CURR_IN_REG
+	/* gp already saved on stack: now load with "current" */
+	GET_CURR_TASK_ON_CPU   gp
 #endif
+	; OUTPUT: r10 has ECR expected by EV_Trap
+.endm
 
-	lr	r10, [ecr]
-	st      r10, [sp, PT_event]    /* EV_Trap expects r10 to have ECR */
+.macro EXCEPTION_PROLOGUE
+
+	EXCEPTION_PROLOGUE_KEEP_AE	; return ECR in r10
+
+	lr  r0, [efa]
+	mov r1, sp
+
+	FAKE_RET_FROM_EXCPN		; clobbers r9
 .endm
 
 /*--------------------------------------------------------------
@@ -207,15 +282,10 @@
  * NOTE:
  *
  * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
- * for memory load operations. If used in that way interrupts are deffered
+ * for memory load operations. If used in that way interrupts are deferred
  * by hardware and that is not good.
  *-------------------------------------------------------------*/
 .macro EXCEPTION_EPILOGUE
-#ifdef CONFIG_ARC_PLAT_EZNPS
-	.word CTOP_INST_SCHD_RW
-	POPAX   CTOP_AUX_EFLAGS
-	POPAX   CTOP_AUX_GPA1
-#endif
 
 	POPAX	erbta
 	POPAX	lp_start
@@ -231,11 +301,8 @@
 	POP	gp
 	RESTORE_R12_TO_R0
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	ld	r25, [sp, 12]
-#endif
 	ld  sp, [sp] /* restore original sp */
-	/* orig_r0, ECR, user_r25 skipped automatically */
+	/* orig_r0, ECR skipped automatically */
 .endm
 
 /* Dummy ECR values for Interrupts */
@@ -252,15 +319,8 @@
 
 	SWITCH_TO_KERNEL_STK
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	/* Treat r25 as scratch reg (save on stack) and load with "current" */
-	PUSH    r25
-	GET_CURR_TASK_ON_CPU   r25
-#else
-	sub     sp, sp, 4
-#endif
 
-	PUSH	0x003\LVL\()abcd    /* Dummy ECR */
+	st.a	0x003\LVL\()abcd, [sp, -4]	/* Dummy ECR */
 	sub	sp, sp, 8	    /* skip orig_r0 (not needed)
 				       skip pt_regs->sp, already saved above */
 
@@ -278,10 +338,9 @@
 	PUSHAX	lp_start
 	PUSHAX	bta_l\LVL\()
 
-#ifdef CONFIG_ARC_PLAT_EZNPS
-	.word CTOP_INST_SCHD_RW
-	PUSHAX  CTOP_AUX_GPA1
-	PUSHAX  CTOP_AUX_EFLAGS
+#ifdef CONFIG_ARC_CURR_IN_REG
+	/* gp already saved on stack: now load with "current" */
+	GET_CURR_TASK_ON_CPU   gp
 #endif
 .endm
 
@@ -291,15 +350,10 @@
  * NOTE:
  *
  * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
- * for memory load operations. If used in that way interrupts are deffered
+ * for memory load operations. If used in that way interrupts are deferred
  * by hardware and that is not good.
  *-------------------------------------------------------------*/
 .macro INTERRUPT_EPILOGUE  LVL
-#ifdef CONFIG_ARC_PLAT_EZNPS
-	.word CTOP_INST_SCHD_RW
-	POPAX   CTOP_AUX_EFLAGS
-	POPAX   CTOP_AUX_GPA1
-#endif
 
 	POPAX	bta_l\LVL\()
 	POPAX	lp_start
@@ -315,11 +369,7 @@
 	POP	gp
 	RESTORE_R12_TO_R0
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	ld	r25, [sp, 12]
-#endif
-	ld  sp, [sp] /* restore original sp */
-	/* orig_r0, ECR, user_r25 skipped automatically */
+	ld  sp, [sp] /* restore original sp; orig_r0, ECR skipped implicitly */
 .endm
 
 /* Get thread_info of "current" tsk */
@@ -327,13 +377,11 @@
 	bic \reg, sp, (THREAD_SIZE - 1)
 .endm
 
-#ifndef CONFIG_ARC_PLAT_EZNPS
 /* Get CPU-ID of this core */
 .macro  GET_CPU_ID  reg
 	lr  \reg, [identity]
 	lsr \reg, \reg, 8
 	bmsk \reg, \reg, 7
 .endm
-#endif
 
 #endif  /* __ASM_ARC_ENTRY_COMPACT_H */
diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
index fcdd59d77f42..f453af251a1a 100644
--- a/arch/arc/include/asm/entry.h
+++ b/arch/arc/include/asm/entry.h
@@ -7,193 +7,45 @@
 #ifndef __ASM_ARC_ENTRY_H
 #define __ASM_ARC_ENTRY_H
 
-#include <asm/unistd.h>		/* For NR_syscalls defination */
+#include <asm/unistd.h>		/* For NR_syscalls definition */
 #include <asm/arcregs.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>	/* For VMALLOC_START */
 #include <asm/mmu.h>
 
+#ifdef __ASSEMBLER__
+
 #ifdef CONFIG_ISA_ARCOMPACT
 #include <asm/entry-compact.h>	/* ISA specific bits */
 #else
 #include <asm/entry-arcv2.h>
 #endif
 
-/* Note on the LD/ST addr modes with addr reg wback
- *
- * LD.a same as LD.aw
- *
- * LD.a    reg1, [reg2, x]  => Pre Incr
- *      Eff Addr for load = [reg2 + x]
- *
- * LD.ab   reg1, [reg2, x]  => Post Incr
- *      Eff Addr for load = [reg2]
+/*
+ * save user mode callee regs as struct callee_regs
+ *  - needed by fork/do_signal/unaligned-access-emulation.
  */
-
-.macro PUSH reg
-	st.a	\reg, [sp, -4]
-.endm
-
-.macro PUSHAX aux
-	lr	r9, [\aux]
-	PUSH	r9
-.endm
-
-.macro POP reg
-	ld.ab	\reg, [sp, 4]
-.endm
-
-.macro POPAX aux
-	POP	r9
-	sr	r9, [\aux]
-.endm
-
-/*--------------------------------------------------------------
- * Helpers to save/restore Scratch Regs:
- * used by Interrupt/Exception Prologue/Epilogue
- *-------------------------------------------------------------*/
-.macro  SAVE_R0_TO_R12
-	PUSH	r0
-	PUSH	r1
-	PUSH	r2
-	PUSH	r3
-	PUSH	r4
-	PUSH	r5
-	PUSH	r6
-	PUSH	r7
-	PUSH	r8
-	PUSH	r9
-	PUSH	r10
-	PUSH	r11
-	PUSH	r12
-.endm
-
-.macro RESTORE_R12_TO_R0
-	POP	r12
-	POP	r11
-	POP	r10
-	POP	r9
-	POP	r8
-	POP	r7
-	POP	r6
-	POP	r5
-	POP	r4
-	POP	r3
-	POP	r2
-	POP	r1
-	POP	r0
-
-.endm
-
-/*--------------------------------------------------------------
- * Helpers to save/restore callee-saved regs:
- * used by several macros below
- *-------------------------------------------------------------*/
-.macro SAVE_R13_TO_R24
-	PUSH	r13
-	PUSH	r14
-	PUSH	r15
-	PUSH	r16
-	PUSH	r17
-	PUSH	r18
-	PUSH	r19
-	PUSH	r20
-	PUSH	r21
-	PUSH	r22
-	PUSH	r23
-	PUSH	r24
-.endm
-
-.macro RESTORE_R24_TO_R13
-	POP	r24
-	POP	r23
-	POP	r22
-	POP	r21
-	POP	r20
-	POP	r19
-	POP	r18
-	POP	r17
-	POP	r16
-	POP	r15
-	POP	r14
-	POP	r13
-.endm
-
-/*--------------------------------------------------------------
- * Collect User Mode callee regs as struct callee_regs - needed by
- * fork/do_signal/unaligned-access-emulation.
- * (By default only scratch regs are saved on entry to kernel)
- *
- * Special handling for r25 if used for caching Task Pointer.
- * It would have been saved in task->thread.user_r25 already, but to keep
- * the interface same it is copied into regular r25 placeholder in
- * struct callee_regs.
- *-------------------------------------------------------------*/
 .macro SAVE_CALLEE_SAVED_USER
+	SAVE_ABI_CALLEE_REGS
+.endm
 
-	mov	r12, sp		; save SP as ref to pt_regs
-	SAVE_R13_TO_R24
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	; Retrieve orig r25 and save it with rest of callee_regs
-	ld	r12, [r12, PT_user_r25]
-	PUSH	r12
-#else
-	PUSH	r25
-#endif
-
+/*
+ * restore user mode callee regs as struct callee_regs
+ *  - could have been changed by ptrace tracer or unaligned-access fixup
+ */
+.macro RESTORE_CALLEE_SAVED_USER
+	RESTORE_ABI_CALLEE_REGS
 .endm
 
-/*--------------------------------------------------------------
- * Save kernel Mode callee regs at the time of Contect Switch.
- *
- * Special handling for r25 if used for caching Task Pointer.
- * Kernel simply skips saving it since it will be loaded with
- * incoming task pointer anyways
- *-------------------------------------------------------------*/
+/*
+ * save/restore kernel mode callee regs at the time of context switch
+ */
 .macro SAVE_CALLEE_SAVED_KERNEL
-
-	SAVE_R13_TO_R24
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	sub     sp, sp, 4
-#else
-	PUSH	r25
-#endif
+	SAVE_ABI_CALLEE_REGS
 .endm
 
-/*--------------------------------------------------------------
- * Opposite of SAVE_CALLEE_SAVED_KERNEL
- *-------------------------------------------------------------*/
 .macro RESTORE_CALLEE_SAVED_KERNEL
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	add     sp, sp, 4  /* skip usual r25 placeholder */
-#else
-	POP	r25
-#endif
-	RESTORE_R24_TO_R13
-.endm
-
-/*--------------------------------------------------------------
- * Opposite of SAVE_CALLEE_SAVED_USER
- *
- * ptrace tracer or unaligned-access fixup might have changed a user mode
- * callee reg which is saved back to usual r25 storage location
- *-------------------------------------------------------------*/
-.macro RESTORE_CALLEE_SAVED_USER
-
-#ifdef CONFIG_ARC_CURR_IN_REG
-	POP	r12
-#else
-	POP	r25
-#endif
-	RESTORE_R24_TO_R13
-
-	; SP is back to start of pt_regs
-#ifdef CONFIG_ARC_CURR_IN_REG
-	st	r12, [sp, PT_user_r25]
-#endif
+	RESTORE_ABI_CALLEE_REGS
 .endm
 
 /*--------------------------------------------------------------
@@ -204,7 +56,7 @@
 .endm
 
 /*-------------------------------------------------------------
- * given a tsk struct, get to the base of it's kernel mode stack
+ * given a tsk struct, get to the base of its kernel mode stack
  * tsk->thread_info is really a PAGE, whose bottom hoists stack
  * which grows upwards towards thread_info
  *------------------------------------------------------------*/
@@ -229,10 +81,10 @@
 
 #ifdef CONFIG_SMP
 
-/*-------------------------------------------------
+/*
  * Retrieve the current running task on this CPU
- * 1. Determine curr CPU id.
- * 2. Use it to index into _current_task[ ]
+ *  - loads it from backing _current_task[] (and can't use the
+ *    caching reg for current task
  */
 .macro  GET_CURR_TASK_ON_CPU   reg
 	GET_CPU_ID  \reg
@@ -254,7 +106,7 @@
 	add2 \tmp, @_current_task, \tmp
 	st   \tsk, [\tmp]
 #ifdef CONFIG_ARC_CURR_IN_REG
-	mov r25, \tsk
+	mov gp, \tsk
 #endif
 
 .endm
@@ -269,21 +121,20 @@
 .macro  SET_CURR_TASK_ON_CPU    tsk, tmp
 	st  \tsk, [@_current_task]
 #ifdef CONFIG_ARC_CURR_IN_REG
-	mov r25, \tsk
+	mov gp, \tsk
 #endif
 .endm
 
 #endif /* SMP / UNI */
 
-/* ------------------------------------------------------------------
+/*
  * Get the ptr to some field of Current Task at @off in task struct
- *  -Uses r25 for Current task ptr if that is enabled
+ *  - Uses current task cached in reg if enabled
  */
-
 #ifdef CONFIG_ARC_CURR_IN_REG
 
 .macro GET_CURR_TASK_FIELD_PTR  off,  reg
-	add \reg, r25, \off
+	add \reg, gp, \off
 .endm
 
 #else
@@ -295,4 +146,23 @@
 
 #endif	/* CONFIG_ARC_CURR_IN_REG */
 
+#else	/* !__ASSEMBLER__ */
+
+extern void do_signal(struct pt_regs *);
+extern void do_notify_resume(struct pt_regs *);
+extern int do_privilege_fault(unsigned long, struct pt_regs *);
+extern int do_extension_fault(unsigned long, struct pt_regs *);
+extern int insterror_is_error(unsigned long, struct pt_regs *);
+extern int do_memory_error(unsigned long, struct pt_regs *);
+extern int trap_is_brkpt(unsigned long, struct pt_regs *);
+extern int do_misaligned_error(unsigned long, struct pt_regs *);
+extern int do_trap5_error(unsigned long, struct pt_regs *);
+extern int do_misaligned_access(unsigned long, struct pt_regs *, struct callee_regs *);
+extern void do_machine_check_fault(unsigned long, struct pt_regs *);
+extern void do_non_swi_trap(unsigned long, struct pt_regs *);
+extern void do_insterror_or_kprobe(unsigned long, struct pt_regs *);
+extern void do_page_fault(unsigned long, struct pt_regs *);
+
+#endif
+
 #endif  /* __ASM_ARC_ENTRY_H */
diff --git a/arch/arc/include/asm/fb.h b/arch/arc/include/asm/fb.h
deleted file mode 100644
index dc2e303cdbbb..000000000000
--- a/arch/arc/include/asm/fb.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
-				unsigned long off)
-{
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
-	return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/arch/arc/include/asm/fpu.h b/arch/arc/include/asm/fpu.h
new file mode 100644
index 000000000000..006bcf88a7a5
--- /dev/null
+++ b/arch/arc/include/asm/fpu.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ *
+ */
+
+#ifndef _ASM_ARC_FPU_H
+#define _ASM_ARC_FPU_H
+
+#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
+
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
+
+/* These DPFP regs need to be saved/restored across ctx-sw */
+struct arc_fpu {
+	struct {
+		unsigned int l, h;
+	} aux_dpfp[2];
+};
+
+#define fpu_init_task(regs)
+
+#else
+
+/*
+ * ARCv2 FPU Control aux register
+ *   - bits to enable Traps on Exceptions
+ *   - Rounding mode
+ *
+ * ARCv2 FPU Status aux register
+ *   - FPU exceptions flags (Inv, Div-by-Zero, overflow, underflow, inexact)
+ *   - Flag Write Enable to clear flags explicitly (vs. by fpu instructions
+ *     only
+ */
+
+struct arc_fpu {
+	unsigned int ctrl, status;
+};
+
+extern void fpu_init_task(struct pt_regs *regs);
+
+#endif	/* !CONFIG_ISA_ARCOMPACT */
+
+struct task_struct;
+
+extern void fpu_save_restore(struct task_struct *p, struct task_struct *n);
+
+#else	/* !CONFIG_ARC_FPU_SAVE_RESTORE */
+
+#define fpu_save_restore(p, n)
+#define fpu_init_task(regs)
+
+#endif	/* CONFIG_ARC_FPU_SAVE_RESTORE */
+
+#endif	/* _ASM_ARC_FPU_H */
diff --git a/arch/arc/include/asm/futex.h b/arch/arc/include/asm/futex.h
index 9d0d070e6c22..607d1c16d4dd 100644
--- a/arch/arc/include/asm/futex.h
+++ b/arch/arc/include/asm/futex.h
@@ -75,10 +75,12 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
 {
 	int oldval = 0, ret;
 
+	if (!access_ok(uaddr, sizeof(u32)))
+		return -EFAULT;
+
 #ifndef CONFIG_ARC_HAS_LLSC
 	preempt_disable();	/* to guarantee atomic r-m-w of futex op */
 #endif
-	pagefault_disable();
 
 	switch (op) {
 	case FUTEX_OP_SET:
@@ -101,7 +103,6 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
 		ret = -ENOSYS;
 	}
 
-	pagefault_enable();
 #ifndef CONFIG_ARC_HAS_LLSC
 	preempt_enable();
 #endif
diff --git a/arch/arc/include/asm/highmem.h b/arch/arc/include/asm/highmem.h
index 1af00accb37f..a6b8e2c352c4 100644
--- a/arch/arc/include/asm/highmem.h
+++ b/arch/arc/include/asm/highmem.h
@@ -9,49 +9,45 @@
 #ifdef CONFIG_HIGHMEM
 
 #include <uapi/asm/page.h>
-#include <asm/kmap_types.h>
+#include <asm/kmap_size.h>
+
+#define FIXMAP_SIZE		PGDIR_SIZE
+#define PKMAP_SIZE		PGDIR_SIZE
 
 /* start after vmalloc area */
 #define FIXMAP_BASE		(PAGE_OFFSET - FIXMAP_SIZE - PKMAP_SIZE)
-#define FIXMAP_SIZE		PGDIR_SIZE	/* only 1 PGD worth */
-#define KM_TYPE_NR		((FIXMAP_SIZE >> PAGE_SHIFT)/NR_CPUS)
-#define FIXMAP_ADDR(nr)		(FIXMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define FIX_KMAP_SLOTS		(KM_MAX_IDX * NR_CPUS)
+#define FIX_KMAP_BEGIN		(0UL)
+#define FIX_KMAP_END		((FIX_KMAP_BEGIN + FIX_KMAP_SLOTS) - 1)
+
+#define FIXADDR_TOP		(FIXMAP_BASE + (FIX_KMAP_END << PAGE_SHIFT))
+
+/*
+ * This should be converted to the asm-generic version, but of course this
+ * is needlessly different from all other architectures. Sigh - tglx
+ */
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	(((FIXADDR_TOP - ((x) & PAGE_MASK))) >> PAGE_SHIFT)
 
 /* start after fixmap area */
 #define PKMAP_BASE		(FIXMAP_BASE + FIXMAP_SIZE)
-#define PKMAP_SIZE		PGDIR_SIZE
 #define LAST_PKMAP		(PKMAP_SIZE >> PAGE_SHIFT)
 #define LAST_PKMAP_MASK		(LAST_PKMAP - 1)
 #define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
 #define PKMAP_NR(virt)		(((virt) - PKMAP_BASE) >> PAGE_SHIFT)
 
-#define kmap_prot		PAGE_KERNEL
-
-
 #include <asm/cacheflush.h>
 
-extern void *kmap(struct page *page);
-extern void *kmap_high(struct page *page);
-extern void *kmap_atomic(struct page *page);
-extern void __kunmap_atomic(void *kvaddr);
-extern void kunmap_high(struct page *page);
-
 extern void kmap_init(void);
 
+#define arch_kmap_local_post_unmap(vaddr)			\
+	local_flush_tlb_kernel_range(vaddr, vaddr + PAGE_SIZE)
+
 static inline void flush_cache_kmaps(void)
 {
 	flush_cache_all();
 }
-
-static inline void kunmap(struct page *page)
-{
-	BUG_ON(in_interrupt());
-	if (!PageHighMem(page))
-		return;
-	kunmap_high(page);
-}
-
-
 #endif
 
 #endif
diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h
index 9a74ce71a767..7765dc105d54 100644
--- a/arch/arc/include/asm/hugepage.h
+++ b/arch/arc/include/asm/hugepage.h
@@ -8,9 +8,15 @@
 #define _ASM_ARC_HUGEPAGE_H
 
 #include <linux/types.h>
-#define __ARCH_USE_5LEVEL_HACK
 #include <asm-generic/pgtable-nopmd.h>
 
+/*
+ * Hugetlb definitions.
+ */
+#define HPAGE_SHIFT		PMD_SHIFT
+#define HPAGE_SIZE		(_AC(1, UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+
 static inline pte_t pmd_pte(pmd_t pmd)
 {
 	return __pte(pmd_val(pmd));
@@ -22,21 +28,18 @@ static inline pmd_t pte_pmd(pte_t pte)
 }
 
 #define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
-#define pmd_mkwrite(pmd)	pte_pmd(pte_mkwrite(pmd_pte(pmd)))
+#define pmd_mkwrite_novma(pmd)	pte_pmd(pte_mkwrite_novma(pmd_pte(pmd)))
 #define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))
 #define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
 #define pmd_mkyoung(pmd)	pte_pmd(pte_mkyoung(pmd_pte(pmd)))
 #define pmd_mkhuge(pmd)		pte_pmd(pte_mkhuge(pmd_pte(pmd)))
-#define pmd_mknotpresent(pmd)	pte_pmd(pte_mknotpresent(pmd_pte(pmd)))
+#define pmd_mkinvalid(pmd)	pte_pmd(pte_mknotpresent(pmd_pte(pmd)))
 #define pmd_mkclean(pmd)	pte_pmd(pte_mkclean(pmd_pte(pmd)))
 
 #define pmd_write(pmd)		pte_write(pmd_pte(pmd))
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
-#define pmd_pfn(pmd)		pte_pfn(pmd_pte(pmd))
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 
-#define mk_pmd(page, prot)	pte_pmd(mk_pte(page, prot))
-
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) & _PAGE_HW_SZ)
 
 #define pfn_pmd(pfn, prot)	(__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
@@ -59,14 +62,6 @@ static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
 				 pmd_t *pmd);
 
-/* Generic variants assume pgtable_t is struct page *, hence need for these */
-#define __HAVE_ARCH_PGTABLE_DEPOSIT
-extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
-				       pgtable_t pgtable);
-
-#define __HAVE_ARCH_PGTABLE_WITHDRAW
-extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
-
 #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
 extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 				unsigned long end);
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 72f7929736f8..00171a212b3c 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -9,7 +9,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 
 #ifdef CONFIG_ISA_ARCV2
 #include <asm/barrier.h>
@@ -21,8 +21,9 @@
 #endif
 
 extern void __iomem *ioremap(phys_addr_t paddr, unsigned long size);
-extern void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
-				  unsigned long flags);
+#define ioremap ioremap
+#define ioremap_prot ioremap_prot
+#define iounmap iounmap
 static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
 {
 	return (void __iomem *)port;
@@ -32,12 +33,6 @@ static inline void ioport_unmap(void __iomem *addr)
 {
 }
 
-extern void iounmap(const void __iomem *addr);
-
-#define ioremap_nocache(phy, sz)	ioremap(phy, sz)
-#define ioremap_wc(phy, sz)		ioremap(phy, sz)
-#define ioremap_wt(phy, sz)		ioremap(phy, sz)
-
 /*
  * io{read,write}{16,32}be() macros
  */
@@ -47,9 +42,6 @@ extern void iounmap(const void __iomem *addr);
 #define iowrite16be(v,p)	({ __iowmb(); __raw_writew((__force u16)cpu_to_be16(v), p); })
 #define iowrite32be(v,p)	({ __iowmb(); __raw_writel((__force u32)cpu_to_be32(v), p); })
 
-/* Change struct page to physical address */
-#define page_to_phys(page)		(page_to_pfn(page) << PAGE_SHIFT)
-
 #define __raw_readb __raw_readb
 static inline u8 __raw_readb(const volatile void __iomem *addr)
 {
diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
index 0309cb405cfb..9cd79263acba 100644
--- a/arch/arc/include/asm/irq.h
+++ b/arch/arc/include/asm/irq.h
@@ -10,7 +10,7 @@
  * ARCv2 can support 240 interrupts in the core interrupts controllers and
  * 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most
  * configurations of boards.
- * This doesnt affect ARCompact, but we change it to same value
+ * This doesn't affect ARCompact, but we change it to same value
  */
 #define NR_IRQS		512
 
@@ -25,5 +25,6 @@
 #include <asm-generic/irq.h>
 
 extern void arc_init_IRQ(void);
+extern void arch_do_IRQ(unsigned int, struct pt_regs *);
 
 #endif
diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h
index fb3c21f1a238..30aea562f8aa 100644
--- a/arch/arc/include/asm/irqflags-arcv2.h
+++ b/arch/arc/include/asm/irqflags-arcv2.h
@@ -50,7 +50,7 @@
 #define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | __AD_ENB | \
 					(ARCV2_IRQ_DEF_PRIO << 1))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * Save IRQ state and disable IRQs
@@ -170,6 +170,6 @@ static inline void arc_softirq_clear(int irq)
 	seti
 .endm
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h
index 7fc73fef5e29..85c2f6bcde0c 100644
--- a/arch/arc/include/asm/irqflags-compact.h
+++ b/arch/arc/include/asm/irqflags-compact.h
@@ -40,18 +40,22 @@
 
 #define ISA_INIT_STATUS_BITS	STATUS_IE_MASK
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /******************************************************************
  * IRQ Control Macros
  *
  * All of them have "memory" clobber (compiler barrier) which is needed to
- * ensure that LD/ST requiring irq safetly (R-M-W when LLSC is not available)
+ * ensure that LD/ST requiring irq safety (R-M-W when LLSC is not available)
  * are redone after IRQs are re-enabled (and gcc doesn't reuse stale register)
  *
  * Noted at the time of Abilis Timer List corruption
- *	Orig Bug + Rejected solution	: https://lkml.org/lkml/2013/3/29/67
- *	Reasoning			: https://lkml.org/lkml/2013/4/8/15
+ *
+ * Orig Bug + Rejected solution:
+ * https://lore.kernel.org/lkml/1364553218-31255-1-git-send-email-vgupta@synopsys.com
+ *
+ * Reasoning:
+ * https://lore.kernel.org/lkml/CA+55aFyFWjpSVQM6M266tKrG_ZXJzZ-nYejpmXYQXbrr42mGPQ@mail.gmail.com
  *
  ******************************************************************/
 
@@ -90,6 +94,9 @@ static inline void arch_local_irq_restore(unsigned long flags)
 /*
  * Unconditionally Enable IRQs
  */
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+extern void arch_local_irq_enable(void);
+#else
 static inline void arch_local_irq_enable(void)
 {
 	unsigned long temp;
@@ -102,7 +109,7 @@ static inline void arch_local_irq_enable(void)
 	: "n"((STATUS_E1_MASK | STATUS_E2_MASK))
 	: "cc", "memory");
 }
-
+#endif
 
 /*
  * Unconditionally Disable IRQs
@@ -189,6 +196,6 @@ static inline int arch_irqs_disabled(void)
 	flag	\scratch
 .endm
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/jump_label.h b/arch/arc/include/asm/jump_label.h
new file mode 100644
index 000000000000..66ead75784d9
--- /dev/null
+++ b/arch/arc/include/asm/jump_label.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARC_JUMP_LABEL_H
+#define _ASM_ARC_JUMP_LABEL_H
+
+#ifndef __ASSEMBLER__
+
+#include <linux/stringify.h>
+#include <linux/types.h>
+
+#define JUMP_LABEL_NOP_SIZE 4
+
+/*
+ * NOTE about '.balign 4':
+ *
+ * To make atomic update of patched instruction available we need to guarantee
+ * that this instruction doesn't cross L1 cache line boundary.
+ *
+ * As of today we simply align instruction which can be patched by 4 byte using
+ * ".balign 4" directive. In that case patched instruction is aligned with one
+ * 16-bit NOP_S if this is required.
+ * However 'align by 4' directive is much stricter than it actually required.
+ * It's enough that our 32-bit instruction don't cross L1 cache line boundary /
+ * L1 I$ fetch block boundary which can be achieved by using
+ * ".bundle_align_mode" assembler directive. That will save us from adding
+ * useless NOP_S padding in most of the cases.
+ *
+ * TODO: switch to ".bundle_align_mode" directive using whin it will be
+ * supported by ARC toolchain.
+ */
+
+static __always_inline bool arch_static_branch(struct static_key *key,
+					       bool branch)
+{
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
+		 "1:							\n"
+		 "nop							\n"
+		 ".pushsection __jump_table, \"aw\"			\n"
+		 ".word 1b, %l[l_yes], %c0				\n"
+		 ".popsection						\n"
+		 : : "i" (&((char *)key)[branch]) : : l_yes);
+
+	return false;
+l_yes:
+	return true;
+}
+
+static __always_inline bool arch_static_branch_jump(struct static_key *key,
+						    bool branch)
+{
+	asm goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)"		\n"
+		 "1:							\n"
+		 "b %l[l_yes]						\n"
+		 ".pushsection __jump_table, \"aw\"			\n"
+		 ".word 1b, %l[l_yes], %c0				\n"
+		 ".popsection						\n"
+		 : : "i" (&((char *)key)[branch]) : : l_yes);
+
+	return false;
+l_yes:
+	return true;
+}
+
+typedef u32 jump_label_t;
+
+struct jump_entry {
+	jump_label_t code;
+	jump_label_t target;
+	jump_label_t key;
+};
+
+#endif  /* __ASSEMBLER__ */
+#endif
diff --git a/arch/arc/include/asm/kmap_types.h b/arch/arc/include/asm/kmap_types.h
deleted file mode 100644
index fecf7851ec32..000000000000
--- a/arch/arc/include/asm/kmap_types.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2015 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
-/*
- * We primarily need to define KM_TYPE_NR here but that in turn
- * is a function of PGDIR_SIZE etc.
- * To avoid circular deps issue, put everything in asm/highmem.h
- */
-#endif
diff --git a/arch/arc/include/asm/kprobes.h b/arch/arc/include/asm/kprobes.h
index 2134721dce44..68e8301c0df2 100644
--- a/arch/arc/include/asm/kprobes.h
+++ b/arch/arc/include/asm/kprobes.h
@@ -32,9 +32,6 @@ struct kprobe;
 
 void arch_remove_kprobe(struct kprobe *p);
 
-int kprobe_exceptions_notify(struct notifier_block *self,
-			     unsigned long val, void *data);
-
 struct prev_kprobe {
 	struct kprobe *kp;
 	unsigned long status;
@@ -46,7 +43,7 @@ struct kprobe_ctlblk {
 };
 
 int kprobe_fault_handler(struct pt_regs *regs, unsigned long cause);
-void kretprobe_trampoline(void);
+void __kretprobe_trampoline(void);
 void trap_is_kprobe(unsigned long address, struct pt_regs *regs);
 #else
 #define trap_is_kprobe(address, regs)
diff --git a/arch/arc/include/asm/linkage.h b/arch/arc/include/asm/linkage.h
index d9ee43c6b7db..ba3cb65b5eaa 100644
--- a/arch/arc/include/asm/linkage.h
+++ b/arch/arc/include/asm/linkage.h
@@ -8,7 +8,11 @@
 
 #include <asm/dwarf.h>
 
-#ifdef __ASSEMBLY__
+#define ASM_NL		 `	/* use '`' to mark new line in macro */
+#define __ALIGN		.align 4
+#define __ALIGN_STR	__stringify(__ALIGN)
+
+#ifdef __ASSEMBLER__
 
 .macro ST2 e, o, off
 #ifdef CONFIG_ARC_HAS_LL64
@@ -28,8 +32,6 @@
 #endif
 .endm
 
-#define ASM_NL		 `	/* use '`' to mark new line in macro */
-
 /* annotation for data we want in DCCM - if enabled in .config */
 .macro ARCFP_DATA nm
 #ifdef CONFIG_ARC_HAS_DCCM
@@ -59,20 +61,20 @@
 	CFI_ENDPROC ASM_NL	\
 	.size name, .-name
 
-#else	/* !__ASSEMBLY__ */
+#else	/* !__ASSEMBLER__ */
 
 #ifdef CONFIG_ARC_HAS_ICCM
-#define __arcfp_code __section(.text.arcfp)
+#define __arcfp_code __section(".text.arcfp")
 #else
-#define __arcfp_code __section(.text)
+#define __arcfp_code __section(".text")
 #endif
 
 #ifdef CONFIG_ARC_HAS_DCCM
-#define __arcfp_data __section(.data.arcfp)
+#define __arcfp_data __section(".data.arcfp")
 #else
-#define __arcfp_data __section(.data)
+#define __arcfp_data __section(".data")
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h
index 73746ed5b834..c4e197059379 100644
--- a/arch/arc/include/asm/mach_desc.h
+++ b/arch/arc/include/asm/mach_desc.h
@@ -53,7 +53,7 @@ extern const struct machine_desc __arch_info_begin[], __arch_info_end[];
  */
 #define MACHINE_START(_type, _name)			\
 static const struct machine_desc __mach_desc_##_type	\
-__used __section(.arch.info.init) = {			\
+__used __section(".arch.info.init") = {			\
 	.name		= _name,
 
 #define MACHINE_END				\
diff --git a/arch/arc/include/asm/mmu-arcv2.h b/arch/arc/include/asm/mmu-arcv2.h
new file mode 100644
index 000000000000..5e5482026ac9
--- /dev/null
+++ b/arch/arc/include/asm/mmu-arcv2.h
@@ -0,0 +1,105 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012, 2019-20 Synopsys, Inc. (www.synopsys.com)
+ *
+ * MMUv3 (arc700) / MMUv4 (archs) are software page walked and software managed.
+ * This file contains the TLB access registers and commands
+ */
+
+#ifndef _ASM_ARC_MMU_ARCV2_H
+#define _ASM_ARC_MMU_ARCV2_H
+
+#include <soc/arc/arc_aux.h>
+
+/*
+ * TLB Management regs
+ */
+#define ARC_REG_MMU_BCR		0x06f
+
+#ifdef CONFIG_ARC_MMU_V3
+#define ARC_REG_TLBPD0		0x405
+#define ARC_REG_TLBPD1		0x406
+#define ARC_REG_TLBPD1HI	0	/* Dummy: allows common code */
+#define ARC_REG_TLBINDEX	0x407
+#define ARC_REG_TLBCOMMAND	0x408
+#define ARC_REG_PID		0x409
+#define ARC_REG_SCRATCH_DATA0	0x418
+#else
+#define ARC_REG_TLBPD0		0x460
+#define ARC_REG_TLBPD1		0x461
+#define ARC_REG_TLBPD1HI	0x463
+#define ARC_REG_TLBINDEX	0x464
+#define ARC_REG_TLBCOMMAND	0x465
+#define ARC_REG_PID		0x468
+#define ARC_REG_SCRATCH_DATA0	0x46c
+#endif
+
+/* Bits in MMU PID reg */
+#define __TLB_ENABLE		(1 << 31)
+#define __PROG_ENABLE		(1 << 30)
+#define MMU_ENABLE		(__TLB_ENABLE | __PROG_ENABLE)
+
+/* Bits in TLB Index reg */
+#define TLB_LKUP_ERR		0x80000000
+
+#ifdef CONFIG_ARC_MMU_V3
+#define TLB_DUP_ERR		(TLB_LKUP_ERR | 0x00000001)
+#else
+#define TLB_DUP_ERR		(TLB_LKUP_ERR | 0x40000000)
+#endif
+
+/*
+ * TLB Commands
+ */
+#define TLBWrite    		0x1
+#define TLBRead     		0x2
+#define TLBGetIndex 		0x3
+#define TLBProbe    		0x4
+#define TLBWriteNI		0x5  /* write JTLB without inv uTLBs */
+#define TLBIVUTLB		0x6  /* explicitly inv uTLBs */
+
+#ifdef CONFIG_ARC_MMU_V4
+#define TLBInsertEntry		0x7
+#define TLBDeleteEntry		0x8
+#endif
+
+/* Masks for actual TLB "PD"s */
+#define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
+#define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
+
+#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
+
+#ifndef __ASSEMBLER__
+
+struct mm_struct;
+extern int pae40_exist_but_not_enab(void);
+
+static inline int is_pae40_enabled(void)
+{
+	return IS_ENABLED(CONFIG_ARC_HAS_PAE40);
+}
+
+static inline void mmu_setup_asid(struct mm_struct *mm, unsigned long asid)
+{
+	write_aux_reg(ARC_REG_PID, asid | MMU_ENABLE);
+}
+
+static inline void mmu_setup_pgd(struct mm_struct *mm, void *pgd)
+{
+	/* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */
+#ifdef CONFIG_ISA_ARCV2
+	write_aux_reg(ARC_REG_SCRATCH_DATA0, (unsigned int)pgd);
+#endif
+}
+
+#else
+
+.macro ARC_MMU_REENABLE reg
+	lr \reg, [ARC_REG_PID]
+	or \reg, \reg, MMU_ENABLE
+	sr \reg, [ARC_REG_PID]
+.endm
+
+#endif /* !__ASSEMBLER__ */
+
+#endif
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
index 98cadf1a09ac..e3b35ceab582 100644
--- a/arch/arc/include/asm/mmu.h
+++ b/arch/arc/include/asm/mmu.h
@@ -6,93 +6,19 @@
 #ifndef _ASM_ARC_MMU_H
 #define _ASM_ARC_MMU_H
 
-#ifndef __ASSEMBLY__
-#include <linux/threads.h>	/* NR_CPUS */
-#endif
-
-#if defined(CONFIG_ARC_MMU_V1)
-#define CONFIG_ARC_MMU_VER 1
-#elif defined(CONFIG_ARC_MMU_V2)
-#define CONFIG_ARC_MMU_VER 2
-#elif defined(CONFIG_ARC_MMU_V3)
-#define CONFIG_ARC_MMU_VER 3
-#elif defined(CONFIG_ARC_MMU_V4)
-#define CONFIG_ARC_MMU_VER 4
-#endif
-
-/* MMU Management regs */
-#define ARC_REG_MMU_BCR		0x06f
-#if (CONFIG_ARC_MMU_VER < 4)
-#define ARC_REG_TLBPD0		0x405
-#define ARC_REG_TLBPD1		0x406
-#define ARC_REG_TLBPD1HI	0	/* Dummy: allows code sharing with ARC700 */
-#define ARC_REG_TLBINDEX	0x407
-#define ARC_REG_TLBCOMMAND	0x408
-#define ARC_REG_PID		0x409
-#define ARC_REG_SCRATCH_DATA0	0x418
-#else
-#define ARC_REG_TLBPD0		0x460
-#define ARC_REG_TLBPD1		0x461
-#define ARC_REG_TLBPD1HI	0x463
-#define ARC_REG_TLBINDEX	0x464
-#define ARC_REG_TLBCOMMAND	0x465
-#define ARC_REG_PID		0x468
-#define ARC_REG_SCRATCH_DATA0	0x46c
-#endif
-
-/* Bits in MMU PID register */
-#define __TLB_ENABLE		(1 << 31)
-#define __PROG_ENABLE		(1 << 30)
-#define MMU_ENABLE		(__TLB_ENABLE | __PROG_ENABLE)
-
-/* Error code if probe fails */
-#define TLB_LKUP_ERR		0x80000000
-
-#if (CONFIG_ARC_MMU_VER < 4)
-#define TLB_DUP_ERR	(TLB_LKUP_ERR | 0x00000001)
-#else
-#define TLB_DUP_ERR	(TLB_LKUP_ERR | 0x40000000)
-#endif
+#ifndef __ASSEMBLER__
 
-/* TLB Commands */
-#define TLBWrite    0x1
-#define TLBRead     0x2
-#define TLBGetIndex 0x3
-#define TLBProbe    0x4
-
-#if (CONFIG_ARC_MMU_VER >= 2)
-#define TLBWriteNI  0x5		/* write JTLB without inv uTLBs */
-#define TLBIVUTLB   0x6		/* explicitly inv uTLBs */
-#endif
-
-#if (CONFIG_ARC_MMU_VER >= 4)
-#define TLBInsertEntry	0x7
-#define TLBDeleteEntry	0x8
-#endif
-
-#ifndef __ASSEMBLY__
+#include <linux/threads.h>	/* NR_CPUS */
 
 typedef struct {
 	unsigned long asid[NR_CPUS];	/* 8 bit MMU PID + Generation cycle */
 } mm_context_t;
 
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-void tlb_paranoid_check(unsigned int mm_asid, unsigned long address);
-#else
-#define tlb_paranoid_check(a, b)
-#endif
-
-void arc_mmu_init(void);
-extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
-void read_decode_mmu_bcr(void);
+struct pt_regs;
+extern void do_tlb_overlap_fault(unsigned long, unsigned long, struct pt_regs *);
 
-static inline int is_pae40_enabled(void)
-{
-	return IS_ENABLED(CONFIG_ARC_HAS_PAE40);
-}
-
-extern int pae40_exist_but_not_enab(void);
+#endif
 
-#endif	/* !__ASSEMBLY__ */
+#include <asm/mmu-arcv2.h>
 
 #endif
diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h
index 035470816be5..9963bb1a5733 100644
--- a/arch/arc/include/asm/mmu_context.h
+++ b/arch/arc/include/asm/mmu_context.h
@@ -15,22 +15,23 @@
 #ifndef _ASM_ARC_MMU_CONTEXT_H
 #define _ASM_ARC_MMU_CONTEXT_H
 
-#include <asm/arcregs.h>
-#include <asm/tlb.h>
 #include <linux/sched/mm.h>
 
+#include <asm/tlb.h>
 #include <asm-generic/mm_hooks.h>
 
-/*		ARC700 ASID Management
+/*		ARC ASID Management
+ *
+ * MMU tags TLBs with an 8-bit ASID, avoiding need to flush the TLB on
+ * context-switch.
  *
- * ARC MMU provides 8-bit ASID (0..255) to TAG TLB entries, allowing entries
- * with same vaddr (different tasks) to co-exit. This provides for
- * "Fast Context Switch" i.e. no TLB flush on ctxt-switch
+ * ASID is managed per cpu, so task threads across CPUs can have different
+ * ASID. Global ASID management is needed if hardware supports TLB shootdown
+ * and/or shared TLB across cores, which ARC doesn't.
  *
- * Linux assigns each task a unique ASID. A simple round-robin allocation
- * of H/w ASID is done using software tracker @asid_cpu.
- * When it reaches max 255, the allocation cycle starts afresh by flushing
- * the entire TLB and wrapping ASID back to zero.
+ * Each task is assigned unique ASID, with a simple round-robin allocator
+ * tracked in @asid_cpu. When 8-bit value rolls over,a new cycle is started
+ * over from 0, and TLB is flushed
  *
  * A new allocation cycle, post rollover, could potentially reassign an ASID
  * to a different task. Thus the rule is to refresh the ASID in a new cycle.
@@ -93,7 +94,7 @@ static inline void get_new_mmu_context(struct mm_struct *mm)
 	asid_mm(mm, cpu) = asid_cpu(cpu);
 
 set_hw:
-	write_aux_reg(ARC_REG_PID, hw_pid(mm, cpu) | MMU_ENABLE);
+	mmu_setup_asid(mm, hw_pid(mm, cpu));
 
 	local_irq_restore(flags);
 }
@@ -102,6 +103,7 @@ set_hw:
  * Initialize the context related info for a new mm_struct
  * instance.
  */
+#define init_new_context init_new_context
 static inline int
 init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
@@ -113,6 +115,7 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 	return 0;
 }
 
+#define destroy_context destroy_context
 static inline void destroy_context(struct mm_struct *mm)
 {
 	unsigned long flags;
@@ -144,32 +147,28 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	 */
 	cpumask_set_cpu(cpu, mm_cpumask(next));
 
-#ifndef CONFIG_SMP
-	/* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */
-	write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd);
-#endif
+	mmu_setup_pgd(next, next->pgd);
 
 	get_new_mmu_context(next);
 }
 
 /*
- * Called at the time of execve() to get a new ASID
- * Note the subtlety here: get_new_mmu_context() behaves differently here
- * vs. in switch_mm(). Here it always returns a new ASID, because mm has
- * an unallocated "initial" value, while in latter, it moves to a new ASID,
- * only if it was unallocated
+ * activate_mm defaults (in asm-generic) to switch_mm and is called at the
+ * time of execve() to get a new ASID Note the subtlety here:
+ * get_new_mmu_context() behaves differently here vs. in switch_mm(). Here
+ * it always returns a new ASID, because mm has an unallocated "initial"
+ * value, while in latter, it moves to a new ASID, only if it was
+ * unallocated
  */
-#define activate_mm(prev, next)		switch_mm(prev, next, NULL)
 
 /* it seemed that deactivate_mm( ) is a reasonable place to do book-keeping
  * for retiring-mm. However destroy_context( ) still needs to do that because
  * between mm_release( ) = >deactive_mm( ) and
  * mmput => .. => __mmdrop( ) => destroy_context( )
- * there is a good chance that task gets sched-out/in, making it's ASID valid
+ * there is a good chance that task gets sched-out/in, making its ASID valid
  * again (this teased me for a whole day).
  */
-#define deactivate_mm(tsk, mm)   do { } while (0)
 
-#define enter_lazy_tlb(mm, tsk)
+#include <asm-generic/mmu_context.h>
 
 #endif /* __ASM_ARC_MMU_CONTEXT_H */
diff --git a/arch/arc/include/asm/mmzone.h b/arch/arc/include/asm/mmzone.h
deleted file mode 100644
index b86b9d1e54dc..000000000000
--- a/arch/arc/include/asm/mmzone.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef _ASM_ARC_MMZONE_H
-#define _ASM_ARC_MMZONE_H
-
-#ifdef CONFIG_DISCONTIGMEM
-
-extern struct pglist_data node_data[];
-#define NODE_DATA(nid) (&node_data[nid])
-
-static inline int pfn_to_nid(unsigned long pfn)
-{
-	int is_end_low = 1;
-
-	if (IS_ENABLED(CONFIG_ARC_HAS_PAE40))
-		is_end_low = pfn <= virt_to_pfn(0xFFFFFFFFUL);
-
-	/*
-	 * node 0: lowmem:             0x8000_0000   to 0xFFFF_FFFF
-	 * node 1: HIGHMEM w/o  PAE40: 0x0           to 0x7FFF_FFFF
-	 *         HIGHMEM with PAE40: 0x1_0000_0000 to ...
-	 */
-	if (pfn >= ARCH_PFN_OFFSET && is_end_low)
-		return 0;
-
-	return 1;
-}
-
-static inline int pfn_valid(unsigned long pfn)
-{
-	int nid = pfn_to_nid(pfn);
-
-	return (pfn <= node_end_pfn(nid));
-}
-#endif /* CONFIG_DISCONTIGMEM  */
-
-#endif
diff --git a/arch/arc/include/asm/module.h b/arch/arc/include/asm/module.h
index 48f13a4ace4b..f534a1fef070 100644
--- a/arch/arc/include/asm/module.h
+++ b/arch/arc/include/asm/module.h
@@ -3,7 +3,6 @@
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  *
  * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
-
  */
 
 #ifndef _ASM_ARC_MODULE_H
@@ -19,8 +18,4 @@ struct mod_arch_specific {
 	const char *secstr;
 };
 
-#define MODULE_PROC_FAMILY "ARC700"
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
 #endif /* _ASM_ARC_MODULE_H */
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index 0a32e8cfd074..9720fe6b2c24 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -7,9 +7,22 @@
 
 #include <uapi/asm/page.h>
 
-#ifndef __ASSEMBLY__
+#ifdef CONFIG_ARC_HAS_PAE40
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	40
+#define PAGE_MASK_PHYS			(0xff00000000ull | PAGE_MASK)
+
+#else /* CONFIG_ARC_HAS_PAE40 */
+
+#define MAX_POSSIBLE_PHYSMEM_BITS	32
+#define PAGE_MASK_PHYS			PAGE_MASK
+
+#endif /* CONFIG_ARC_HAS_PAE40 */
+
+#ifndef __ASSEMBLER__
 
 #define clear_page(paddr)		memset((paddr), 0, PAGE_SIZE)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
 #define copy_page(to, from)		memcpy((to), (from), PAGE_SIZE)
 
 struct vm_area_struct;
@@ -21,72 +34,74 @@ void copy_user_highpage(struct page *to, struct page *from,
 			unsigned long u_vaddr, struct vm_area_struct *vma);
 void clear_user_page(void *to, unsigned long u_vaddr, struct page *page);
 
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct {
-#ifdef CONFIG_ARC_HAS_PAE40
-	unsigned long long pte;
-#else
-	unsigned long pte;
-#endif
-} pte_t;
 typedef struct {
 	unsigned long pgd;
 } pgd_t;
+
+#define pgd_val(x)	((x).pgd)
+#define __pgd(x)	((pgd_t) { (x) })
+
+#if CONFIG_PGTABLE_LEVELS > 3
+
 typedef struct {
-	unsigned long pgprot;
-} pgprot_t;
+	unsigned long pud;
+} pud_t;
+
+#define pud_val(x)      	((x).pud)
+#define __pud(x)        	((pud_t) { (x) })
+
+#endif
 
-#define pte_val(x)      ((x).pte)
-#define pgd_val(x)      ((x).pgd)
-#define pgprot_val(x)   ((x).pgprot)
+#if CONFIG_PGTABLE_LEVELS > 2
 
-#define __pte(x)        ((pte_t) { (x) })
-#define __pgd(x)        ((pgd_t) { (x) })
-#define __pgprot(x)     ((pgprot_t) { (x) })
+typedef struct {
+	unsigned long pmd;
+} pmd_t;
 
-#define pte_pgprot(x) __pgprot(pte_val(x))
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) })
 
-#else /* !STRICT_MM_TYPECHECKS */
+#endif
 
+typedef struct {
 #ifdef CONFIG_ARC_HAS_PAE40
-typedef unsigned long long pte_t;
+	unsigned long long pte;
 #else
-typedef unsigned long pte_t;
+	unsigned long pte;
 #endif
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
+} pte_t;
 
-#define pte_val(x)	(x)
-#define pgd_val(x)	(x)
-#define pgprot_val(x)	(x)
-#define __pte(x)	(x)
-#define __pgd(x)	(x)
-#define __pgprot(x)	(x)
-#define pte_pgprot(x)	(x)
+#define pte_val(x)	((x).pte)
+#define __pte(x)	((pte_t) { (x) })
 
-#endif
+typedef struct {
+	unsigned long pgprot;
+} pgprot_t;
+
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) })
+#define pte_pgprot(x)	__pgprot(pte_val(x))
 
-typedef pte_t * pgtable_t;
+typedef struct page *pgtable_t;
 
 /*
- * Use virt_to_pfn with caution:
- * If used in pte or paddr related macros, it could cause truncation
- * in PAE40 builds
- * As a rule of thumb, only use it in helpers starting with virt_
- * You have been warned !
+ * When HIGHMEM is enabled we have holes in the memory map so we need
+ * pfn_valid() that takes into account the actual extents of the physical
+ * memory
  */
-#define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
+#ifdef CONFIG_HIGHMEM
 
-#define ARCH_PFN_OFFSET		virt_to_pfn(CONFIG_LINUX_RAM_BASE)
+extern unsigned long arch_pfn_offset;
+#define ARCH_PFN_OFFSET		arch_pfn_offset
 
-#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn)		(((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
-#endif
+extern int pfn_valid(unsigned long pfn);
+#define pfn_valid		pfn_valid
+
+#else /* CONFIG_HIGHMEM */
+
+#define ARCH_PFN_OFFSET		virt_to_pfn((void *)CONFIG_LINUX_RAM_BASE)
+
+#endif /* CONFIG_HIGHMEM */
 
 /*
  * __pa, __va, virt_to_page (ALERT: deprecated, don't use them)
@@ -95,20 +110,32 @@ typedef pte_t * pgtable_t;
  * virt here means link-address/program-address as embedded in object code.
  * And for ARC, link-addr = physical address
  */
-#define __pa(vaddr)  ((unsigned long)(vaddr))
-#define __va(paddr)  ((void *)((unsigned long)(paddr)))
+#define __pa(vaddr)  		((unsigned long)(vaddr))
+#define __va(paddr)  		((void *)((unsigned long)(paddr)))
+
+/*
+ * Use virt_to_pfn with caution:
+ * If used in pte or paddr related macros, it could cause truncation
+ * in PAE40 builds
+ * As a rule of thumb, only use it in helpers starting with virt_
+ * You have been warned !
+ */
+static inline unsigned long virt_to_pfn(const void *kaddr)
+{
+	return __pa(kaddr) >> PAGE_SHIFT;
+}
 
 #define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
 
 /* Default Permissions for stack/heaps pages (Non Executable) */
-#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_NON_EXEC
 
 #define WANT_PAGE_VIRTUAL   1
 
 #include <asm-generic/memory_model.h>   /* page_to_pfn, pfn_to_page */
 #include <asm-generic/getorder.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/perf_event.h b/arch/arc/include/asm/perf_event.h
index 30b9ae511ea9..d5719a260864 100644
--- a/arch/arc/include/asm/perf_event.h
+++ b/arch/arc/include/asm/perf_event.h
@@ -63,166 +63,8 @@ struct arc_reg_cc_build {
 
 #define PERF_COUNT_ARC_HW_MAX	(PERF_COUNT_HW_MAX + 8)
 
-/*
- * Some ARC pct quirks:
- *
- * PERF_COUNT_HW_STALLED_CYCLES_BACKEND
- * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
- *	The ARC 700 can either measure stalls per pipeline stage, or all stalls
- *	combined; for now we assign all stalls to STALLED_CYCLES_BACKEND
- *	and all pipeline flushes (e.g. caused by mispredicts, etc.) to
- *	STALLED_CYCLES_FRONTEND.
- *
- *	We could start multiple performance counters and combine everything
- *	afterwards, but that makes it complicated.
- *
- *	Note that I$ cache misses aren't counted by either of the two!
- */
-
-/*
- * ARC PCT has hardware conditions with fixed "names" but variable "indexes"
- * (based on a specific RTL build)
- * Below is the static map between perf generic/arc specific event_id and
- * h/w condition names.
- * At the time of probe, we loop thru each index and find it's name to
- * complete the mapping of perf event_id to h/w index as latter is needed
- * to program the counter really
- */
-static const char * const arc_pmu_ev_hw_map[] = {
-	/* count cycles */
-	[PERF_COUNT_HW_CPU_CYCLES] = "crun",
-	[PERF_COUNT_HW_REF_CPU_CYCLES] = "crun",
-	[PERF_COUNT_HW_BUS_CYCLES] = "crun",
-
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush",
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall",
-
-	/* counts condition */
-	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
-	/* All jump instructions that are taken */
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
-#ifdef CONFIG_ISA_ARCV2
-	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
-#else
-	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
-	[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
+#ifdef CONFIG_PERF_EVENTS
+#define perf_arch_bpf_user_pt_regs(regs) (struct user_regs_struct *)regs
 #endif
-	[PERF_COUNT_ARC_LDC] = "imemrdc",	/* Instr: mem read cached */
-	[PERF_COUNT_ARC_STC] = "imemwrc",	/* Instr: mem write cached */
-
-	[PERF_COUNT_ARC_DCLM] = "dclm",		/* D-cache Load Miss */
-	[PERF_COUNT_ARC_DCSM] = "dcsm",		/* D-cache Store Miss */
-	[PERF_COUNT_ARC_ICM] = "icm",		/* I-cache Miss */
-	[PERF_COUNT_ARC_EDTLB] = "edtlb",	/* D-TLB Miss */
-	[PERF_COUNT_ARC_EITLB] = "eitlb",	/* I-TLB Miss */
-
-	[PERF_COUNT_HW_CACHE_REFERENCES] = "imemrdc",	/* Instr: mem read cached */
-	[PERF_COUNT_HW_CACHE_MISSES] = "dclm",		/* D-cache Load Miss */
-};
-
-#define C(_x)			PERF_COUNT_HW_CACHE_##_x
-#define CACHE_OP_UNSUPPORTED	0xffff
-
-static const unsigned arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCLM,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_STC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCSM,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_HW_INSTRUCTIONS,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_ICM,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EDTLB,
-		},
-			/* DTLB LD/ST Miss not segregated by h/w*/
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EITLB,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
-			[C(RESULT_MISS)]	= PERF_COUNT_HW_BRANCH_MISSES,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(NODE)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
 
 #endif /* __ASM_PERF_EVENT_H */
diff --git a/arch/arc/include/asm/pgalloc.h b/arch/arc/include/asm/pgalloc.h
index b747f2ec2928..dfae070fe8d5 100644
--- a/arch/arc/include/asm/pgalloc.h
+++ b/arch/arc/include/asm/pgalloc.h
@@ -18,10 +18,10 @@
  * vineetg: April 2010
  *  -Switched pgtable_t from being struct page * to unsigned long
  *      =Needed so that Page Table allocator (pte_alloc_one) is not forced to
- *       to deal with struct page. Thay way in future we can make it allocate
+ *       deal with struct page. That way in future we can make it allocate
  *       multiple PG Tbls in one Page Frame
  *      =sweet side effect is avoiding calls to ugly page_address( ) from the
- *       pg-tlb allocator sub-sys (pte_alloc_one, ptr_free, pmd_populate
+ *       pg-tlb allocator sub-sys (pte_alloc_one, ptr_free, pmd_populate)
  *
  *  Amit Bhor, Sameer Dhavale: Codito Technologies 2004
  */
@@ -31,104 +31,62 @@
 
 #include <linux/mm.h>
 #include <linux/log2.h>
+#include <asm-generic/pgalloc.h>
 
 static inline void
 pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
 {
-	pmd_set(pmd, pte);
+	/*
+	 * The cast to long below is OK in 32-bit PAE40 regime with long long pte
+	 * Despite "wider" pte, the pte table needs to be in non-PAE low memory
+	 * as all higher levels can only hold long pointers.
+	 *
+	 * The cast itself is needed given simplistic definition of set_pmd()
+	 */
+	set_pmd(pmd, __pmd((unsigned long)pte));
 }
 
-static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t ptep)
-{
-	pmd_set(pmd, (pte_t *) ptep);
-}
-
-static inline int __get_order_pgd(void)
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte_page)
 {
-	return get_order(PTRS_PER_PGD * sizeof(pgd_t));
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte_page)));
 }
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	int num, num2;
-	pgd_t *ret = (pgd_t *) __get_free_pages(GFP_KERNEL, __get_order_pgd());
+	pgd_t *ret = __pgd_alloc(mm, 0);
 
 	if (ret) {
-		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
-		memzero(ret, num * sizeof(pgd_t));
+		int num, num2;
 
+		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
 		num2 = VMALLOC_SIZE / PGDIR_SIZE;
 		memcpy(ret + num, swapper_pg_dir + num, num2 * sizeof(pgd_t));
-
-		memzero(ret + num + num2,
-			       (PTRS_PER_PGD - num - num2) * sizeof(pgd_t));
-
 	}
 	return ret;
 }
 
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	free_pages((unsigned long)pgd, __get_order_pgd());
-}
-
+#if CONFIG_PGTABLE_LEVELS > 3
 
-/*
- * With software-only page-tables, addr-split for traversal is tweakable and
- * that directly governs how big tables would be at each level.
- * Further, the MMU page size is configurable.
- * Thus we need to programatically assert the size constraint
- * All of this is const math, allowing gcc to do constant folding/propagation.
- */
-
-static inline int __get_order_pte(void)
+static inline void p4d_populate(struct mm_struct *mm, p4d_t *p4dp, pud_t *pudp)
 {
-	return get_order(PTRS_PER_PTE * sizeof(pte_t));
+	set_p4d(p4dp, __p4d((unsigned long)pudp));
 }
 
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
-{
-	pte_t *pte;
+#define __pud_free_tlb(tlb, pmd, addr)  pud_free((tlb)->mm, pmd)
 
-	pte = (pte_t *) __get_free_pages(GFP_KERNEL | __GFP_ZERO,
-					 __get_order_pte());
+#endif
 
-	return pte;
-}
+#if CONFIG_PGTABLE_LEVELS > 2
 
-static inline pgtable_t
-pte_alloc_one(struct mm_struct *mm)
+static inline void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmdp)
 {
-	pgtable_t pte_pg;
-	struct page *page;
-
-	pte_pg = (pgtable_t)__get_free_pages(GFP_KERNEL, __get_order_pte());
-	if (!pte_pg)
-		return 0;
-	memzero((void *)pte_pg, PTRS_PER_PTE * sizeof(pte_t));
-	page = virt_to_page(pte_pg);
-	if (!pgtable_pte_page_ctor(page)) {
-		__free_page(page);
-		return 0;
-	}
-
-	return pte_pg;
+	set_pud(pudp, __pud((unsigned long)pmdp));
 }
 
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	free_pages((unsigned long)pte, __get_order_pte()); /* takes phy addr */
-}
+#define __pmd_free_tlb(tlb, pmd, addr)  pmd_free((tlb)->mm, pmd)
 
-static inline void pte_free(struct mm_struct *mm, pgtable_t ptep)
-{
-	pgtable_pte_page_dtor(virt_to_page(ptep));
-	free_pages((unsigned long)ptep, __get_order_pte());
-}
+#endif
 
 #define __pte_free_tlb(tlb, pte, addr)  pte_free((tlb)->mm, pte)
 
-#define pmd_pgtable(pmd)	((pgtable_t) pmd_page_vaddr(pmd))
-
 #endif /* _ASM_ARC_PGALLOC_H */
diff --git a/arch/arc/include/asm/pgtable-bits-arcv2.h b/arch/arc/include/asm/pgtable-bits-arcv2.h
new file mode 100644
index 000000000000..4630c5acca05
--- /dev/null
+++ b/arch/arc/include/asm/pgtable-bits-arcv2.h
@@ -0,0 +1,147 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * page table flags for software walked/managed MMUv3 (ARC700) and MMUv4 (HS)
+ * There correspond to the corresponding bits in the TLB
+ */
+
+#ifndef _ASM_ARC_PGTABLE_BITS_ARCV2_H
+#define _ASM_ARC_PGTABLE_BITS_ARCV2_H
+
+#ifdef CONFIG_ARC_CACHE_PAGES
+#define _PAGE_CACHEABLE		(1 << 0)  /* Cached (H) */
+#else
+#define _PAGE_CACHEABLE		0
+#endif
+
+#define _PAGE_EXECUTE		(1 << 1)  /* User Execute  (H) */
+#define _PAGE_WRITE		(1 << 2)  /* User Write    (H) */
+#define _PAGE_READ		(1 << 3)  /* User Read     (H) */
+#define _PAGE_ACCESSED		(1 << 4)  /* Accessed      (s) */
+#define _PAGE_DIRTY		(1 << 5)  /* Modified      (s) */
+#define _PAGE_SPECIAL		(1 << 6)
+#define _PAGE_GLOBAL		(1 << 8)  /* ASID agnostic (H) */
+#define _PAGE_PRESENT		(1 << 9)  /* PTE/TLB Valid (H) */
+
+/* We borrow bit 5 to store the exclusive marker in swap PTEs. */
+#define _PAGE_SWP_EXCLUSIVE	_PAGE_DIRTY
+
+#ifdef CONFIG_ARC_MMU_V4
+#define _PAGE_HW_SZ		(1 << 10)  /* Normal/super (H) */
+#else
+#define _PAGE_HW_SZ		0
+#endif
+
+/* Defaults for every user page */
+#define ___DEF		(_PAGE_PRESENT | _PAGE_CACHEABLE)
+
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK	(PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
+							   _PAGE_SPECIAL)
+
+/* More Abbrevaited helpers */
+#define PAGE_U_NONE     __pgprot(___DEF)
+#define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
+#define PAGE_U_W_R      __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE)
+#define PAGE_U_X_R      __pgprot(___DEF | _PAGE_READ | _PAGE_EXECUTE)
+#define PAGE_U_X_W_R    __pgprot(___DEF \
+				| _PAGE_READ | _PAGE_WRITE | _PAGE_EXECUTE)
+#define PAGE_KERNEL     __pgprot(___DEF | _PAGE_GLOBAL \
+				| _PAGE_READ | _PAGE_WRITE | _PAGE_EXECUTE)
+
+#define PAGE_SHARED	PAGE_U_W_R
+
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE))
+
+/*
+ * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
+ *
+ * Certain cases have 1:1 mapping
+ *  e.g. __P101 means VM_READ, VM_EXEC and !VM_SHARED
+ *       which directly corresponds to  PAGE_U_X_R
+ *
+ * Other rules which cause the divergence from 1:1 mapping
+ *
+ *  1. Although ARC700 can do exclusive execute/write protection (meaning R
+ *     can be tracked independently of X/W unlike some other CPUs), still to
+ *     keep things consistent with other archs:
+ *      -Write implies Read:   W => R
+ *      -Execute implies Read: X => R
+ *
+ *  2. Pvt Writable doesn't have Write Enabled initially: Pvt-W => !W
+ *     This is to enable COW mechanism
+ */
+	/* xwr */
+#ifndef __ASSEMBLER__
+
+#define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
+#define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & _PAGE_ACCESSED)
+#define pte_special(pte)	(pte_val(pte) & _PAGE_SPECIAL)
+
+#define PTE_BIT_FUNC(fn, op) \
+	static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(mknotpresent,     &= ~(_PAGE_PRESENT));
+PTE_BIT_FUNC(wrprotect,	&= ~(_PAGE_WRITE));
+PTE_BIT_FUNC(mkwrite_novma,	|= (_PAGE_WRITE));
+PTE_BIT_FUNC(mkclean,	&= ~(_PAGE_DIRTY));
+PTE_BIT_FUNC(mkdirty,	|= (_PAGE_DIRTY));
+PTE_BIT_FUNC(mkold,	&= ~(_PAGE_ACCESSED));
+PTE_BIT_FUNC(mkyoung,	|= (_PAGE_ACCESSED));
+PTE_BIT_FUNC(mkspecial,	|= (_PAGE_SPECIAL));
+PTE_BIT_FUNC(mkhuge,	|= (_PAGE_HW_SZ));
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+struct vm_fault;
+void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
+		unsigned long address, pte_t *ptep, unsigned int nr);
+
+#define update_mmu_cache(vma, addr, ptep) \
+	update_mmu_cache_range(NULL, vma, addr, ptep, 1)
+
+/*
+ * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
+ * are !pte_none() && !pte_present().
+ *
+ * Format of swap PTEs:
+ *
+ *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
+ *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+ *   <-------------- offset -------------> <--- zero --> E < type ->
+ *
+ *   E is the exclusive marker that is not stored in swap entries.
+ *   The zero'ed bits include _PAGE_PRESENT.
+ */
+#define __swp_entry(type, off)		((swp_entry_t) \
+					{ ((type) & 0x1f) | ((off) << 13) })
+
+/* Decode a PTE containing swap "identifier "into constituents */
+#define __swp_type(pte_lookalike)	(((pte_lookalike).val) & 0x1f)
+#define __swp_offset(pte_lookalike)	((pte_lookalike).val >> 13)
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+static inline bool pte_swp_exclusive(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_SWP_EXCLUSIVE;
+}
+
+PTE_BIT_FUNC(swp_mkexclusive, |= (_PAGE_SWP_EXCLUSIVE));
+PTE_BIT_FUNC(swp_clear_exclusive, &= ~(_PAGE_SWP_EXCLUSIVE));
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#include <asm/hugepage.h>
+#endif
+
+#endif /* __ASSEMBLER__ */
+
+#endif
diff --git a/arch/arc/include/asm/pgtable-levels.h b/arch/arc/include/asm/pgtable-levels.h
new file mode 100644
index 000000000000..c8f9273372c0
--- /dev/null
+++ b/arch/arc/include/asm/pgtable-levels.h
@@ -0,0 +1,186 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Helpers for implemenintg paging levels
+ */
+
+#ifndef _ASM_ARC_PGTABLE_LEVELS_H
+#define _ASM_ARC_PGTABLE_LEVELS_H
+
+#if CONFIG_PGTABLE_LEVELS == 2
+
+/*
+ * 2 level paging setup for software walked MMUv3 (ARC700) and MMUv4 (HS)
+ *
+ * [31]            32 bit virtual address              [0]
+ * -------------------------------------------------------
+ * |               | <---------- PGDIR_SHIFT ----------> |
+ * |               |                | <-- PAGE_SHIFT --> |
+ * -------------------------------------------------------
+ *       |                  |                |
+ *       |                  |                --> off in page frame
+ *       |                  ---> index into Page Table
+ *       ----> index into Page Directory
+ *
+ * Given software walk, the vaddr split is arbitrary set to 11:8:13
+ * However enabling of super page in a 2 level regime pegs PGDIR_SHIFT to
+ * super page size.
+ */
+
+#if defined(CONFIG_ARC_HUGEPAGE_16M)
+#define PGDIR_SHIFT		24
+#elif defined(CONFIG_ARC_HUGEPAGE_2M)
+#define PGDIR_SHIFT		21
+#else
+/*
+ * No Super page case
+ * Default value provides 11:8:13 (8K), 10:10:12 (4K)
+ * Limits imposed by pgtable_t only PAGE_SIZE long
+ * (so 4K page can only have 1K entries: or 10 bits)
+ */
+#ifdef CONFIG_ARC_PAGE_SIZE_4K
+#define PGDIR_SHIFT		22
+#else
+#define PGDIR_SHIFT		21
+#endif
+
+#endif
+
+#else /* CONFIG_PGTABLE_LEVELS != 2 */
+
+/*
+ * A default 3 level paging testing setup in software walked MMU
+ *   MMUv4 (8K page): <4> : <7> : <8> : <13>
+ * A default 4 level paging testing setup in software walked MMU
+ *   MMUv4 (8K page): <4> : <3> : <4> : <8> : <13>
+ */
+#define PGDIR_SHIFT		28
+#if CONFIG_PGTABLE_LEVELS > 3
+#define PUD_SHIFT		25
+#endif
+#if CONFIG_PGTABLE_LEVELS > 2
+#define PMD_SHIFT		21
+#endif
+
+#endif /* CONFIG_PGTABLE_LEVELS */
+
+#define PGDIR_SIZE		BIT(PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE - 1))
+#define PTRS_PER_PGD		BIT(32 - PGDIR_SHIFT)
+
+#if CONFIG_PGTABLE_LEVELS > 3
+#define PUD_SIZE		BIT(PUD_SHIFT)
+#define PUD_MASK		(~(PUD_SIZE - 1))
+#define PTRS_PER_PUD		BIT(PGDIR_SHIFT - PUD_SHIFT)
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+#define PMD_SIZE		BIT(PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE - 1))
+#define PTRS_PER_PMD		BIT(PUD_SHIFT - PMD_SHIFT)
+#endif
+
+#define PTRS_PER_PTE		BIT(PMD_SHIFT - PAGE_SHIFT)
+
+#ifndef __ASSEMBLER__
+
+#if CONFIG_PGTABLE_LEVELS > 3
+#include <asm-generic/pgtable-nop4d.h>
+#elif CONFIG_PGTABLE_LEVELS > 2
+#include <asm-generic/pgtable-nopud.h>
+#else
+#include <asm-generic/pgtable-nopmd.h>
+#endif
+
+/*
+ * 1st level paging: pgd
+ */
+#define pgd_ERROR(e) \
+	pr_crit("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+#if CONFIG_PGTABLE_LEVELS > 3
+
+/* In 4 level paging, p4d_* macros work on pgd */
+#define p4d_none(x)		(!p4d_val(x))
+#define p4d_bad(x)		((p4d_val(x) & ~PAGE_MASK))
+#define p4d_present(x)		(p4d_val(x))
+#define p4d_clear(xp)		do { p4d_val(*(xp)) = 0; } while (0)
+#define p4d_pgtable(p4d)	((pud_t *)(p4d_val(p4d) & PAGE_MASK))
+#define p4d_page(p4d)		virt_to_page(p4d_pgtable(p4d))
+#define set_p4d(p4dp, p4d)	(*(p4dp) = p4d)
+
+/*
+ * 2nd level paging: pud
+ */
+#define pud_ERROR(e) \
+	pr_crit("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
+
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+
+/*
+ * In 3 level paging, pud_* macros work on pgd
+ * In 4 level paging, pud_* macros work on pud
+ */
+#define pud_none(x)		(!pud_val(x))
+#define pud_bad(x)		((pud_val(x) & ~PAGE_MASK))
+#define pud_present(x)		(pud_val(x))
+#define pud_clear(xp)		do { pud_val(*(xp)) = 0; } while (0)
+#define pud_pgtable(pud)	((pmd_t *)(pud_val(pud) & PAGE_MASK))
+#define pud_page(pud)		virt_to_page(pud_pgtable(pud))
+#define set_pud(pudp, pud)	(*(pudp) = pud)
+
+/*
+ * 3rd level paging: pmd
+ */
+#define pmd_ERROR(e) \
+	pr_crit("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+
+#define pmd_pfn(pmd)		((pmd_val(pmd) & PMD_MASK) >> PAGE_SHIFT)
+#define pfn_pmd(pfn,prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#endif
+
+/*
+ * Due to the strange way generic pgtable level folding works, the pmd_* macros
+ *  - are valid even for 2 levels (which supposedly only has pgd - pte)
+ *  - behave differently for 2 vs. 3
+ * In 2  level paging        (pgd -> pte), pmd_* macros work on pgd
+ * In 3+ level paging (pgd -> pmd -> pte), pmd_* macros work on pmd
+ */
+#define pmd_none(x)		(!pmd_val(x))
+#define pmd_bad(x)		((pmd_val(x) & ~PAGE_MASK))
+#define pmd_present(x)		(pmd_val(x))
+#define pmd_clear(xp)		do { pmd_val(*(xp)) = 0; } while (0)
+#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
+#define pmd_pfn(pmd)		((pmd_val(pmd) & PAGE_MASK) >> PAGE_SHIFT)
+#define pmd_page(pmd)		virt_to_page((void *)pmd_page_vaddr(pmd))
+#define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
+#define pmd_pgtable(pmd)	((pgtable_t) pmd_page(pmd))
+
+/*
+ * 4th level paging: pte
+ */
+#define pte_ERROR(e) \
+	pr_crit("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+
+#define PFN_PTE_SHIFT		PAGE_SHIFT
+#define pte_none(x)		(!pte_val(x))
+#define pte_present(x)		(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,ptep)	set_pte_at(mm, addr, ptep, __pte(0))
+#define pte_page(pte)		pfn_to_page(pte_pfn(pte))
+#define set_pte(ptep, pte)	((*(ptep)) = (pte))
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
+
+#ifdef CONFIG_ISA_ARCV2
+#define pmd_leaf(x)		(pmd_val(x) & _PAGE_HW_SZ)
+#endif
+
+#endif	/* !__ASSEMBLER__ */
+
+#endif
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 7addd0301c51..bd580e2b62d7 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -1,225 +1,17 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * vineetg: May 2011
- *  -Folded PAGE_PRESENT (used by VM) and PAGE_VALID (used by MMU) into 1.
- *     They are semantically the same although in different contexts
- *     VALID marks a TLB entry exists and it will only happen if PRESENT
- *  - Utilise some unused free bits to confine PTE flags to 12 bits
- *     This is a must for 4k pg-sz
- *
- * vineetg: Mar 2011 - changes to accommodate MMU TLB Page Descriptor mods
- *  -TLB Locking never really existed, except for initial specs
- *  -SILENT_xxx not needed for our port
- *  -Per my request, MMU V3 changes the layout of some of the bits
- *     to avoid a few shifts in TLB Miss handlers.
- *
- * vineetg: April 2010
- *  -PGD entry no longer contains any flags. If empty it is 0, otherwise has
- *   Pg-Tbl ptr. Thus pmd_present(), pmd_valid(), pmd_set( ) become simpler
- *
- * vineetg: April 2010
- *  -Switched form 8:11:13 split for page table lookup to 11:8:13
- *  -this speeds up page table allocation itself as we now have to memset 1K
- *    instead of 8k per page table.
- * -TODO: Right now page table alloc is 8K and rest 7K is unused
- *    need to optimise it
- *
- * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
  */
 
 #ifndef _ASM_ARC_PGTABLE_H
 #define _ASM_ARC_PGTABLE_H
 
 #include <linux/bits.h>
-#define __ARCH_USE_5LEVEL_HACK
-#include <asm-generic/pgtable-nopmd.h>
-#include <asm/page.h>
-#include <asm/mmu.h>	/* to propagate CONFIG_ARC_MMU_VER <n> */
-
-/**************************************************************************
- * Page Table Flags
- *
- * ARC700 MMU only deals with softare managed TLB entries.
- * Page Tables are purely for Linux VM's consumption and the bits below are
- * suited to that (uniqueness). Hence some are not implemented in the TLB and
- * some have different value in TLB.
- * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible because they live in
- *      seperate PD0 and PD1, which combined forms a translation entry)
- *      while for PTE perspective, they are 8 and 9 respectively
- * with MMU v3: Most bits (except SHARED) represent the exact hardware pos
- *      (saves some bit shift ops in TLB Miss hdlrs)
- */
-
-#if (CONFIG_ARC_MMU_VER <= 2)
-
-#define _PAGE_ACCESSED      (1<<1)	/* Page is accessed (S) */
-#define _PAGE_CACHEABLE     (1<<2)	/* Page is cached (H) */
-#define _PAGE_EXECUTE       (1<<3)	/* Page has user execute perm (H) */
-#define _PAGE_WRITE         (1<<4)	/* Page has user write perm (H) */
-#define _PAGE_READ          (1<<5)	/* Page has user read perm (H) */
-#define _PAGE_DIRTY         (1<<6)	/* Page modified (dirty) (S) */
-#define _PAGE_SPECIAL       (1<<7)
-#define _PAGE_GLOBAL        (1<<8)	/* Page is global (H) */
-#define _PAGE_PRESENT       (1<<10)	/* TLB entry is valid (H) */
-
-#else	/* MMU v3 onwards */
-
-#define _PAGE_CACHEABLE     (1<<0)	/* Page is cached (H) */
-#define _PAGE_EXECUTE       (1<<1)	/* Page has user execute perm (H) */
-#define _PAGE_WRITE         (1<<2)	/* Page has user write perm (H) */
-#define _PAGE_READ          (1<<3)	/* Page has user read perm (H) */
-#define _PAGE_ACCESSED      (1<<4)	/* Page is accessed (S) */
-#define _PAGE_DIRTY         (1<<5)	/* Page modified (dirty) (S) */
-#define _PAGE_SPECIAL       (1<<6)
-
-#if (CONFIG_ARC_MMU_VER >= 4)
-#define _PAGE_WTHRU         (1<<7)	/* Page cache mode write-thru (H) */
-#endif
-
-#define _PAGE_GLOBAL        (1<<8)	/* Page is global (H) */
-#define _PAGE_PRESENT       (1<<9)	/* TLB entry is valid (H) */
-
-#if (CONFIG_ARC_MMU_VER >= 4)
-#define _PAGE_HW_SZ         (1<<10)	/* Page Size indicator (H): 0 normal, 1 super */
-#endif
-
-#define _PAGE_SHARED_CODE   (1<<11)	/* Shared Code page with cmn vaddr
-					   usable for shared TLB entries (H) */
-
-#define _PAGE_UNUSED_BIT    (1<<12)
-#endif
-
-/* vmalloc permissions */
-#define _K_PAGE_PERMS  (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \
-			_PAGE_GLOBAL | _PAGE_PRESENT)
-
-#ifndef CONFIG_ARC_CACHE_PAGES
-#undef _PAGE_CACHEABLE
-#define _PAGE_CACHEABLE 0
-#endif
-
-#ifndef _PAGE_HW_SZ
-#define _PAGE_HW_SZ	0
-#endif
-
-/* Defaults for every user page */
-#define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
-
-/* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
 
-/* More Abbrevaited helpers */
-#define PAGE_U_NONE     __pgprot(___DEF)
-#define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
-#define PAGE_U_W_R      __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE)
-#define PAGE_U_X_R      __pgprot(___DEF | _PAGE_READ | _PAGE_EXECUTE)
-#define PAGE_U_X_W_R    __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE | \
-						       _PAGE_EXECUTE)
-
-#define PAGE_SHARED	PAGE_U_W_R
-
-/* While kernel runs out of unstranslated space, vmalloc/modules use a chunk of
- * user vaddr space - visible in all addr spaces, but kernel mode only
- * Thus Global, all-kernel-access, no-user-access, cached
- */
-#define PAGE_KERNEL          __pgprot(_K_PAGE_PERMS | _PAGE_CACHEABLE)
-
-/* ioremap */
-#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
-
-/* Masks for actual TLB "PD"s */
-#define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
-#define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
-
-#ifdef CONFIG_ARC_HAS_PAE40
-#define PTE_BITS_NON_RWX_IN_PD1	(0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE)
-#else
-#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK | _PAGE_CACHEABLE)
-#endif
-
-/**************************************************************************
- * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
- *
- * Certain cases have 1:1 mapping
- *  e.g. __P101 means VM_READ, VM_EXEC and !VM_SHARED
- *       which directly corresponds to  PAGE_U_X_R
- *
- * Other rules which cause the divergence from 1:1 mapping
- *
- *  1. Although ARC700 can do exclusive execute/write protection (meaning R
- *     can be tracked independet of X/W unlike some other CPUs), still to
- *     keep things consistent with other archs:
- *      -Write implies Read:   W => R
- *      -Execute implies Read: X => R
- *
- *  2. Pvt Writable doesn't have Write Enabled initially: Pvt-W => !W
- *     This is to enable COW mechanism
- */
-	/* xwr */
-#define __P000  PAGE_U_NONE
-#define __P001  PAGE_U_R
-#define __P010  PAGE_U_R	/* Pvt-W => !W */
-#define __P011  PAGE_U_R	/* Pvt-W => !W */
-#define __P100  PAGE_U_X_R	/* X => R */
-#define __P101  PAGE_U_X_R
-#define __P110  PAGE_U_X_R	/* Pvt-W => !W and X => R */
-#define __P111  PAGE_U_X_R	/* Pvt-W => !W */
-
-#define __S000  PAGE_U_NONE
-#define __S001  PAGE_U_R
-#define __S010  PAGE_U_W_R	/* W => R */
-#define __S011  PAGE_U_W_R
-#define __S100  PAGE_U_X_R	/* X => R */
-#define __S101  PAGE_U_X_R
-#define __S110  PAGE_U_X_W_R	/* X => R */
-#define __S111  PAGE_U_X_W_R
-
-/****************************************************************
- * 2 tier (PGD:PTE) software page walker
- *
- * [31]		    32 bit virtual address              [0]
- * -------------------------------------------------------
- * |               | <------------ PGDIR_SHIFT ----------> |
- * |		   |					 |
- * | BITS_FOR_PGD  |  BITS_FOR_PTE  | <-- PAGE_SHIFT --> |
- * -------------------------------------------------------
- *       |                  |                |
- *       |                  |                --> off in page frame
- *       |                  ---> index into Page Table
- *       ----> index into Page Directory
- *
- * In a single page size configuration, only PAGE_SHIFT is fixed
- * So both PGD and PTE sizing can be tweaked
- *  e.g. 8K page (PAGE_SHIFT 13) can have
- *  - PGDIR_SHIFT 21  -> 11:8:13 address split
- *  - PGDIR_SHIFT 24  -> 8:11:13 address split
- *
- * If Super Page is configured, PGDIR_SHIFT becomes fixed too,
- * so the sizing flexibility is gone.
- */
-
-#if defined(CONFIG_ARC_HUGEPAGE_16M)
-#define PGDIR_SHIFT	24
-#elif defined(CONFIG_ARC_HUGEPAGE_2M)
-#define PGDIR_SHIFT	21
-#else
-/*
- * Only Normal page support so "hackable" (see comment above)
- * Default value provides 11:8:13 (8K), 11:9:12 (4K)
- */
-#define PGDIR_SHIFT	21
-#endif
-
-#define BITS_FOR_PTE	(PGDIR_SHIFT - PAGE_SHIFT)
-#define BITS_FOR_PGD	(32 - PGDIR_SHIFT)
-
-#define PGDIR_SIZE	BIT(PGDIR_SHIFT)	/* vaddr span, not PDG sz */
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
-
-#define	PTRS_PER_PTE	BIT(BITS_FOR_PTE)
-#define	PTRS_PER_PGD	BIT(BITS_FOR_PGD)
+#include <asm/pgtable-levels.h>
+#include <asm/pgtable-bits-arcv2.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
 
 /*
  * Number of entries a user land program use.
@@ -227,174 +19,16 @@
  */
 #define	USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
 
-/*
- * No special requirements for lowest virtual address we permit any user space
- * mapping to be mapped at.
- */
-#define FIRST_USER_ADDRESS      0UL
-
-
-/****************************************************************
- * Bucket load of VM Helpers
- */
-
-#ifndef __ASSEMBLY__
-
-#define pte_ERROR(e) \
-	pr_crit("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
-	pr_crit("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+#ifndef __ASSEMBLER__
 
-/* the zero page used for uninitialized and anonymous pages */
 extern char empty_zero_page[PAGE_SIZE];
 #define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
 
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)		do { } while (0)
-
-#define set_pte(pteptr, pteval)	((*(pteptr)) = (pteval))
-#define set_pmd(pmdptr, pmdval)	(*(pmdptr) = pmdval)
-
-/* find the page descriptor of the Page Tbl ref by PMD entry */
-#define pmd_page(pmd)		virt_to_page(pmd_val(pmd) & PAGE_MASK)
-
-/* find the logical addr (phy for ARC) of the Page Tbl ref by PMD entry */
-#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
-
-/* In a 2 level sys, setup the PGD entry with PTE value */
-static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
-{
-	pmd_val(*pmdp) = (unsigned long)ptep;
-}
-
-#define pte_none(x)			(!pte_val(x))
-#define pte_present(x)			(pte_val(x) & _PAGE_PRESENT)
-#define pte_clear(mm, addr, ptep)	set_pte_at(mm, addr, ptep, __pte(0))
-
-#define pmd_none(x)			(!pmd_val(x))
-#define	pmd_bad(x)			((pmd_val(x) & ~PAGE_MASK))
-#define pmd_present(x)			(pmd_val(x))
-#define pmd_clear(xp)			do { pmd_val(*(xp)) = 0; } while (0)
-
-#define pte_page(pte)		pfn_to_page(pte_pfn(pte))
-#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-#define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
-
-/* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
-#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-/*
- * pte_offset gets a @ptr to PMD entry (PGD in our 2-tier paging system)
- * and returns ptr to PTE entry corresponding to @addr
- */
-#define pte_offset(dir, addr) ((pte_t *)(pmd_page_vaddr(*dir)) +\
-					 __pte_index(addr))
-
-/* No mapping of Page Tables in high mem etc, so following same as above */
-#define pte_offset_kernel(dir, addr)		pte_offset(dir, addr)
-#define pte_offset_map(dir, addr)		pte_offset(dir, addr)
-
-/* Zoo of pte_xxx function */
-#define pte_read(pte)		(pte_val(pte) & _PAGE_READ)
-#define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
-#define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & _PAGE_ACCESSED)
-#define pte_special(pte)	(pte_val(pte) & _PAGE_SPECIAL)
-
-#define PTE_BIT_FUNC(fn, op) \
-	static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
-
-PTE_BIT_FUNC(mknotpresent,	&= ~(_PAGE_PRESENT));
-PTE_BIT_FUNC(wrprotect,	&= ~(_PAGE_WRITE));
-PTE_BIT_FUNC(mkwrite,	|= (_PAGE_WRITE));
-PTE_BIT_FUNC(mkclean,	&= ~(_PAGE_DIRTY));
-PTE_BIT_FUNC(mkdirty,	|= (_PAGE_DIRTY));
-PTE_BIT_FUNC(mkold,	&= ~(_PAGE_ACCESSED));
-PTE_BIT_FUNC(mkyoung,	|= (_PAGE_ACCESSED));
-PTE_BIT_FUNC(exprotect,	&= ~(_PAGE_EXECUTE));
-PTE_BIT_FUNC(mkexec,	|= (_PAGE_EXECUTE));
-PTE_BIT_FUNC(mkspecial,	|= (_PAGE_SPECIAL));
-PTE_BIT_FUNC(mkhuge,	|= (_PAGE_HW_SZ));
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
-}
-
-/* Macro to mark a page protection as uncacheable */
-#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE))
-
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pteval)
-{
-	set_pte(ptep, pteval);
-}
-
-/*
- * All kernel related VM pages are in init's mm.
- */
-#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
-#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
-#define pgd_offset(mm, addr)	(((mm)->pgd)+pgd_index(addr))
-
-/*
- * Macro to quickly access the PGD entry, utlising the fact that some
- * arch may cache the pointer to Page Directory of "current" task
- * in a MMU register
- *
- * Thus task->mm->pgd (3 pointer dereferences, cache misses etc simply
- * becomes read a register
- *
- * ********CAUTION*******:
- * Kernel code might be dealing with some mm_struct of NON "current"
- * Thus use this macro only when you are certain that "current" is current
- * e.g. when dealing with signal frame setup code etc
- */
-#ifndef CONFIG_SMP
-#define pgd_offset_fast(mm, addr)	\
-({					\
-	pgd_t *pgd_base = (pgd_t *) read_aux_reg(ARC_REG_SCRATCH_DATA0);  \
-	pgd_base + pgd_index(addr);	\
-})
-#else
-#define pgd_offset_fast(mm, addr)	pgd_offset(mm, addr)
-#endif
-
 extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
-		      pte_t *ptep);
-
-/* Encode swap {type,off} tuple into PTE
- * We reserve 13 bits for 5-bit @type, keeping bits 12-5 zero, ensuring that
- * PAGE_PRESENT is zero in a PTE holding swap "identifier"
- */
-#define __swp_entry(type, off)	((swp_entry_t) { \
-					((type) & 0x1f) | ((off) << 13) })
-
-/* Decode a PTE containing swap "identifier "into constituents */
-#define __swp_type(pte_lookalike)	(((pte_lookalike).val) & 0x1f)
-#define __swp_offset(pte_lookalike)	((pte_lookalike).val >> 13)
-
-/* NOPs, to keep generic kernel happy */
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-#define kern_addr_valid(addr)	(1)
-
-/*
- * remap a physical page `pfn' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#include <asm/hugepage.h>
-#endif
-
-#include <asm-generic/pgtable.h>
 
 /* to cope with aliasing VIPT cache */
 #define HAVE_ARCH_UNMAPPED_AREA
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index 706edeaa5583..7f7901ac6643 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -11,45 +11,28 @@
 #ifndef __ASM_ARC_PROCESSOR_H
 #define __ASM_ARC_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/ptrace.h>
-
-#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
-/* These DPFP regs need to be saved/restored across ctx-sw */
-struct arc_fpu {
-	struct {
-		unsigned int l, h;
-	} aux_dpfp[2];
-};
-#endif
-
-#ifdef CONFIG_ARC_PLAT_EZNPS
-struct eznps_dp {
-	unsigned int eflags;
-	unsigned int gpa1;
-};
-#endif
+#include <asm/dsp.h>
+#include <asm/fpu.h>
 
 /* Arch specific stuff which needs to be saved per task.
  * However these items are not so important so as to earn a place in
  * struct thread_info
  */
 struct thread_struct {
-	unsigned long ksp;	/* kernel mode stack pointer */
 	unsigned long callee_reg;	/* pointer to callee regs */
 	unsigned long fault_address;	/* dbls as brkpt holder as well */
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	struct dsp_callee_regs dsp;
+#endif
 #ifdef CONFIG_ARC_FPU_SAVE_RESTORE
 	struct arc_fpu fpu;
 #endif
-#ifdef CONFIG_ARC_PLAT_EZNPS
-	struct eznps_dp dp;
-#endif
 };
 
-#define INIT_THREAD  {                          \
-	.ksp = sizeof(init_stack) + (unsigned long) init_stack, \
-}
+#define INIT_THREAD  { }
 
 /* Forward declaration, a strange C thing */
 struct task_struct;
@@ -57,24 +40,12 @@ struct task_struct;
 #define task_pt_regs(p) \
 	((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1)
 
-/* Free all resources held by a thread */
-#define release_thread(thread) do { } while (0)
-
 /*
  * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise
  * get optimised away by gcc
  */
-#ifndef CONFIG_EZNPS_MTM_EXT
-
 #define cpu_relax()		barrier()
 
-#else
-
-#define cpu_relax()     \
-	__asm__ __volatile__ (".word %0" : : "i"(CTOP_INST_SCHD_RW) : "memory")
-
-#endif
-
 #define KSTK_EIP(tsk)   (task_pt_regs(tsk)->ret)
 #define KSTK_ESP(tsk)   (task_pt_regs(tsk)->sp)
 
@@ -82,7 +53,7 @@ struct task_struct;
  * Where about of Task's sp, fp, blink when it was last seen in kernel mode.
  * Look in process.c for details of kernel stack layout
  */
-#define TSK_K_ESP(tsk)		(tsk->thread.ksp)
+#define TSK_K_ESP(tsk)		(task_thread_info(tsk)->ksp)
 
 #define TSK_K_REG(tsk, off)	(*((unsigned long *)(TSK_K_ESP(tsk) + \
 					sizeof(struct callee_regs) + off)))
@@ -93,9 +64,9 @@ struct task_struct;
 extern void start_thread(struct pt_regs * regs, unsigned long pc,
 			 unsigned long usp);
 
-extern unsigned int get_wchan(struct task_struct *p);
+extern unsigned int __get_wchan(struct task_struct *p);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * Default System Memory Map on ARC
@@ -116,31 +87,13 @@ extern unsigned int get_wchan(struct task_struct *p);
 #define VMALLOC_START	(PAGE_OFFSET - (CONFIG_ARC_KVADDR_SIZE << 20))
 
 /* 1 PGDIR_SIZE each for fixmap/pkmap, 2 PGDIR_SIZE gutter (see asm/highmem.h) */
-#define VMALLOC_SIZE	((CONFIG_ARC_KVADDR_SIZE << 20) - PGDIR_SIZE * 4)
+#define VMALLOC_SIZE	((CONFIG_ARC_KVADDR_SIZE << 20) - PMD_SIZE * 4)
 
 #define VMALLOC_END	(VMALLOC_START + VMALLOC_SIZE)
 
 #define USER_KERNEL_GUTTER    (VMALLOC_START - TASK_SIZE)
 
-#ifdef CONFIG_ARC_PLAT_EZNPS
-/* NPS architecture defines special window of 129M in user address space for
- * special memory areas, when accessing this window the MMU do not use TLB.
- * Instead MMU direct the access to:
- * 0x57f00000:0x57ffffff -- 1M of closely coupled memory (aka CMEM)
- * 0x58000000:0x5fffffff -- 16 huge pages, 8M each, with fixed map (aka FMTs)
- *
- * CMEM - is the fastest memory we got and its size is 16K.
- * FMT  - is used to map either to internal/external memory.
- * Internal memory is the second fast memory and its size is 16M
- * External memory is the biggest memory (16G) and also the slowest.
- *
- * STACK_TOP need to be PMD align (21bit) that is why we supply 0x57e00000.
- */
-#define STACK_TOP       0x57e00000
-#else
 #define STACK_TOP       TASK_SIZE
-#endif
-
 #define STACK_TOP_MAX   STACK_TOP
 
 /* This decides where the kernel will search for a free chunk of vm
diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h
index ba9854ef39e8..f6c052af8f4d 100644
--- a/arch/arc/include/asm/ptrace.h
+++ b/arch/arc/include/asm/ptrace.h
@@ -8,19 +8,26 @@
 #define __ASM_ARC_PTRACE_H
 
 #include <uapi/asm/ptrace.h>
+#include <linux/compiler.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
+
+typedef union {
+	struct {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned long state:8, vec:8, cause:8, param:8;
+#else
+		unsigned long param:8, cause:8, vec:8, state:8;
+#endif
+	};
+	unsigned long full;
+} ecr_reg;
 
 /* THE pt_regs: Defines how regs are saved during entry into kernel */
 
 #ifdef CONFIG_ISA_ARCOMPACT
 struct pt_regs {
 
-#ifdef CONFIG_ARC_PLAT_EZNPS
-	unsigned long eflags;	/* Extended FLAGS */
-	unsigned long gpa1;	/* General Purpose Aux */
-#endif
-
 	/* Real registers */
 	unsigned long bta;	/* bta_l1, bta_l2, erbta */
 
@@ -44,53 +51,38 @@ struct pt_regs {
 	 * 	Last word used by Linux for extra state mgmt (syscall-restart)
 	 * For interrupts, use artificial ECR values to note current prio-level
 	 */
-	union {
-		struct {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-			unsigned long state:8, ecr_vec:8,
-				      ecr_cause:8, ecr_param:8;
-#else
-			unsigned long ecr_param:8, ecr_cause:8,
-				      ecr_vec:8, state:8;
-#endif
-		};
-		unsigned long event;
-	};
+	ecr_reg ecr;
+};
 
-	unsigned long user_r25;
+struct callee_regs {
+	unsigned long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
+
+#define MAX_REG_OFFSET offsetof(struct pt_regs, ecr)
+
 #else
 
 struct pt_regs {
 
 	unsigned long orig_r0;
 
-	union {
-		struct {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-			unsigned long state:8, ecr_vec:8,
-				      ecr_cause:8, ecr_param:8;
-#else
-			unsigned long ecr_param:8, ecr_cause:8,
-				      ecr_vec:8, state:8;
-#endif
-		};
-		unsigned long event;
-	};
+	ecr_reg ecr;		/* Exception Cause Reg */
 
-	unsigned long bta;	/* bta_l1, bta_l2, erbta */
+	unsigned long bta;	/* erbta */
 
-	unsigned long user_r25;
-
-	unsigned long r26;	/* gp */
 	unsigned long fp;
-	unsigned long sp;	/* user/kernel sp depending on where we came from  */
-
-	unsigned long r12, r30;
+	unsigned long r30;
+	unsigned long r12;
+	unsigned long r26;	/* gp */
 
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
 	unsigned long r58, r59;	/* ACCL/ACCH used by FPU / DSP MPY */
 #endif
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	unsigned long DSP_CTRL;
+#endif
+
+	unsigned long sp;	/* user/kernel sp depending on entry  */
 
 	/*------- Below list auto saved by h/w -----------*/
 	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
@@ -104,14 +96,14 @@ struct pt_regs {
 	unsigned long status32;
 };
 
-#endif
-
-/* Callee saved registers - need to be saved only when you are scheduled out */
-
 struct callee_regs {
 	unsigned long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13;
 };
 
+#define MAX_REG_OFFSET offsetof(struct pt_regs, status32)
+
+#endif
+
 #define instruction_pointer(regs)	((regs)->ret)
 #define profile_pc(regs)		instruction_pointer(regs)
 
@@ -130,13 +122,13 @@ struct callee_regs {
 /* return 1 if PC in delay slot */
 #define delay_mode(regs) ((regs->status32 & STATUS_DE_MASK) == STATUS_DE_MASK)
 
-#define in_syscall(regs)    ((regs->ecr_vec == ECR_V_TRAP) && !regs->ecr_param)
-#define in_brkpt_trap(regs) ((regs->ecr_vec == ECR_V_TRAP) && regs->ecr_param)
+#define in_syscall(regs)    ((regs->ecr.vec == ECR_V_TRAP) && !regs->ecr.param)
+#define in_brkpt_trap(regs) ((regs->ecr.vec == ECR_V_TRAP) && regs->ecr.param)
 
 #define STATE_SCALL_RESTARTED	0x01
 
-#define syscall_wont_restart(reg) (reg->state |= STATE_SCALL_RESTARTED)
-#define syscall_restartable(reg) !(reg->state &  STATE_SCALL_RESTARTED)
+#define syscall_wont_restart(regs) (regs->ecr.state |= STATE_SCALL_RESTARTED)
+#define syscall_restartable(regs) !(regs->ecr.state &  STATE_SCALL_RESTARTED)
 
 #define current_pt_regs()					\
 ({								\
@@ -151,6 +143,35 @@ static inline long regs_return_value(struct pt_regs *regs)
 	return (long)regs->r0;
 }
 
-#endif /* !__ASSEMBLY__ */
+static inline void instruction_pointer_set(struct pt_regs *regs,
+					   unsigned long val)
+{
+	instruction_pointer(regs) = val;
+}
+
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->sp;
+}
+
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+extern int syscall_trace_enter(struct pt_regs *);
+extern void syscall_trace_exit(struct pt_regs *);
+
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_PTRACE_H */
diff --git a/arch/arc/include/asm/segment.h b/arch/arc/include/asm/segment.h
deleted file mode 100644
index 6a2a5be5026d..000000000000
--- a/arch/arc/include/asm/segment.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef __ASMARC_SEGMENT_H
-#define __ASMARC_SEGMENT_H
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long mm_segment_t;
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-#define KERNEL_DS		MAKE_MM_SEG(0)
-#define USER_DS			MAKE_MM_SEG(TASK_SIZE)
-
-#define segment_eq(a, b)	((a) == (b))
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASMARC_SEGMENT_H */
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
index 61a97fe70b86..1c6db599e1fc 100644
--- a/arch/arc/include/asm/setup.h
+++ b/arch/arc/include/asm/setup.h
@@ -2,18 +2,14 @@
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  */
-#ifndef __ASMARC_SETUP_H
-#define __ASMARC_SETUP_H
+#ifndef __ASM_ARC_SETUP_H
+#define __ASM_ARC_SETUP_H
 
 
 #include <linux/types.h>
 #include <uapi/asm/setup.h>
 
-#ifdef CONFIG_ARC_PLAT_EZNPS
-#define COMMAND_LINE_SIZE 2048
-#else
 #define COMMAND_LINE_SIZE 256
-#endif
 
 /*
  * Data structure to map a ID to string
@@ -38,4 +34,12 @@ long __init arc_get_mem_sz(void);
 #define IS_AVAIL2(v, s, cfg)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
 #define IS_AVAIL3(v, v2, s)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_DISABLED_RUN(v2))
 
+extern void arc_mmu_init(void);
+extern int arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
+
+extern void arc_cache_init(void);
+extern int arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
+
+extern void __init handle_uboot_args(void);
+
 #endif /* __ASMARC_SETUP_H */
diff --git a/arch/arc/include/asm/shmparam.h b/arch/arc/include/asm/shmparam.h
index 8b0251464ffd..719112af0f41 100644
--- a/arch/arc/include/asm/shmparam.h
+++ b/arch/arc/include/asm/shmparam.h
@@ -6,7 +6,7 @@
 #ifndef __ARC_ASM_SHMPARAM_H
 #define __ARC_ASM_SHMPARAM_H
 
-/* Handle upto 2 cache bins */
+/* Handle up to 2 cache bins */
 #define	SHMLBA	(2 * PAGE_SIZE)
 
 /* Enforce SHMLBA in shmat */
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
index c5de4008d19f..990f834909f0 100644
--- a/arch/arc/include/asm/smp.h
+++ b/arch/arc/include/asm/smp.h
@@ -29,6 +29,8 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 extern void __init smp_init_cpus(void);
 extern void first_lines_of_secondary(void);
 extern const char *arc_platform_smp_cpuinfo(void);
+extern void arc_platform_smp_wait_to_boot(int);
+extern void start_kernel_secondary(void);
 
 /*
  * API expected BY platform smp code (FROM arch smp code)
@@ -75,7 +77,7 @@ static inline const char *arc_platform_smp_cpuinfo(void)
 
 /*
  * ARC700 doesn't support atomic Read-Modify-Write ops.
- * Originally Interrupts had to be disabled around code to gaurantee atomicity.
+ * Originally Interrupts had to be disabled around code to guarantee atomicity.
  * The LLOCK/SCOND insns allow writing interrupt-hassle-free based atomic ops
  * based on retry-if-irq-in-atomic (with hardware assist).
  * However despite these, we provide the IRQ disabling variant
@@ -84,7 +86,7 @@ static inline const char *arc_platform_smp_cpuinfo(void)
  *	support needed.
  *
  * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be
- *	gaurantted by the platform (not something which core handles).
+ *	guaranteed by the platform (not something which core handles).
  *	Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ
  *	disabling for atomicity.
  *
@@ -105,7 +107,6 @@ static inline const char *arc_platform_smp_cpuinfo(void)
 #include <asm/spinlock.h>
 
 extern arch_spinlock_t smp_atomic_ops_lock;
-extern arch_spinlock_t smp_bitops_lock;
 
 #define atomic_ops_lock(flags)	do {		\
 	local_irq_save(flags);			\
@@ -117,24 +118,11 @@ extern arch_spinlock_t smp_bitops_lock;
 	local_irq_restore(flags);		\
 } while (0)
 
-#define bitops_lock(flags)	do {		\
-	local_irq_save(flags);			\
-	arch_spin_lock(&smp_bitops_lock);	\
-} while (0)
-
-#define bitops_unlock(flags) do {		\
-	arch_spin_unlock(&smp_bitops_lock);	\
-	local_irq_restore(flags);		\
-} while (0)
-
 #else /* !CONFIG_SMP */
 
 #define atomic_ops_lock(flags)		local_irq_save(flags)
 #define atomic_ops_unlock(flags)	local_irq_restore(flags)
 
-#define bitops_lock(flags)		local_irq_save(flags)
-#define bitops_unlock(flags)		local_irq_restore(flags)
-
 #endif /* !CONFIG_SMP */
 
 #endif	/* !CONFIG_ARC_HAS_LLSC */
diff --git a/arch/arc/include/asm/spinlock.h b/arch/arc/include/asm/spinlock.h
index 94bbed88e3fc..192871608925 100644
--- a/arch/arc/include/asm/spinlock.h
+++ b/arch/arc/include/asm/spinlock.h
@@ -232,15 +232,9 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 
 	__asm__ __volatile__(
 	"1:	ex  %0, [%1]		\n"
-#ifdef CONFIG_EZNPS_MTM_EXT
-	"	.word %3		\n"
-#endif
 	"	breq  %0, %2, 1b	\n"
 	: "+&r" (val)
 	: "r"(&(lock->slock)), "ir"(__ARCH_SPIN_LOCK_LOCKED__)
-#ifdef CONFIG_EZNPS_MTM_EXT
-	, "i"(CTOP_INST_SCHD_RW)
-#endif
 	: "memory");
 
 	smp_mb();
diff --git a/arch/arc/include/asm/switch_to.h b/arch/arc/include/asm/switch_to.h
index 77f123385e96..5806106a65f9 100644
--- a/arch/arc/include/asm/switch_to.h
+++ b/arch/arc/include/asm/switch_to.h
@@ -6,39 +6,19 @@
 #ifndef _ASM_ARC_SWITCH_TO_H
 #define _ASM_ARC_SWITCH_TO_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/sched.h>
-
-#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
-
-extern void fpu_save_restore(struct task_struct *p, struct task_struct *n);
-#define ARC_FPU_PREV(p, n)	fpu_save_restore(p, n)
-#define ARC_FPU_NEXT(t)
-
-#else
-
-#define ARC_FPU_PREV(p, n)
-#define ARC_FPU_NEXT(n)
-
-#endif /* !CONFIG_ARC_FPU_SAVE_RESTORE */
-
-#ifdef CONFIG_ARC_PLAT_EZNPS
-extern void dp_save_restore(struct task_struct *p, struct task_struct *n);
-#define ARC_EZNPS_DP_PREV(p, n)      dp_save_restore(p, n)
-#else
-#define ARC_EZNPS_DP_PREV(p, n)
-
-#endif /* !CONFIG_ARC_PLAT_EZNPS */
+#include <asm/dsp-impl.h>
+#include <asm/fpu.h>
 
 struct task_struct *__switch_to(struct task_struct *p, struct task_struct *n);
 
 #define switch_to(prev, next, last)	\
 do {					\
-	ARC_EZNPS_DP_PREV(prev, next);	\
-	ARC_FPU_PREV(prev, next);	\
+	dsp_save_restore(prev, next);	\
+	fpu_save_restore(prev, next);	\
 	last = __switch_to(prev, next);\
-	ARC_FPU_NEXT(next);		\
 	mb();				\
 } while (0)
 
diff --git a/arch/arc/include/asm/syscall.h b/arch/arc/include/asm/syscall.h
index 94529e89dff0..728d625a10f1 100644
--- a/arch/arc/include/asm/syscall.h
+++ b/arch/arc/include/asm/syscall.h
@@ -12,6 +12,8 @@
 #include <asm/unistd.h>
 #include <asm/ptrace.h>		/* in_syscall() */
 
+extern void *sys_call_table[];
+
 static inline long
 syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 {
@@ -22,6 +24,17 @@ syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
 }
 
 static inline void
+syscall_set_nr(struct task_struct *task, struct pt_regs *regs, int nr)
+{
+	/*
+	 * Unlike syscall_get_nr(), syscall_set_nr() can be called only when
+	 * the target task is stopped for tracing on entering syscall, so
+	 * there is no need to have the same check syscall_get_nr() has.
+	 */
+	regs->r8 = nr;
+}
+
+static inline void
 syscall_rollback(struct task_struct *task, struct pt_regs *regs)
 {
 	regs->r0 = regs->orig_r0;
@@ -65,6 +78,20 @@ syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
 	}
 }
 
+static inline void
+syscall_set_arguments(struct task_struct *task, struct pt_regs *regs,
+		      unsigned long *args)
+{
+	unsigned long *inside_ptregs = &regs->r0;
+	unsigned int n = 6;
+	unsigned int i = 0;
+
+	while (n--) {
+		*inside_ptregs = args[i++];
+		inside_ptregs--;
+	}
+}
+
 static inline int
 syscall_get_arch(struct task_struct *task)
 {
diff --git a/arch/arc/include/asm/syscalls.h b/arch/arc/include/asm/syscalls.h
index 7ddba13e9b59..c3f4714a4f5c 100644
--- a/arch/arc/include/asm/syscalls.h
+++ b/arch/arc/include/asm/syscalls.h
@@ -11,6 +11,7 @@
 #include <linux/types.h>
 
 int sys_clone_wrapper(int, int, int, int, int);
+int sys_clone3_wrapper(void *, size_t);
 int sys_cacheflush(uint32_t, uint32_t uint32_t);
 int sys_arc_settls(void *);
 int sys_arc_gettls(void);
diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h
index f9eef0e8f0b7..255d2c774219 100644
--- a/arch/arc/include/asm/thread_info.h
+++ b/arch/arc/include/asm/thread_info.h
@@ -24,10 +24,9 @@
 #define THREAD_SIZE     (PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_SHIFT	(PAGE_SHIFT << THREAD_SIZE_ORDER)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/thread_info.h>
-#include <asm/segment.h>
 
 /*
  * low level task data that entry.S needs immediate access to
@@ -38,17 +37,16 @@
  */
 struct thread_info {
 	unsigned long flags;		/* low level flags */
-	int preempt_count;		/* 0 => preemptable, <0 => BUG */
-	struct task_struct *task;	/* main task structure */
-	mm_segment_t addr_limit;	/* thread address space */
-	__u32 cpu;			/* current CPU */
+	unsigned long ksp;		/* kernel mode stack top in __switch_to */
+	int preempt_count;		/* 0 => preemptible, <0 => BUG */
+	int cpu;			/* current CPU */
 	unsigned long thr_ptr;		/* TLS ptr */
+	struct task_struct *task;	/* main task structure */
 };
 
 /*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
+ * initilaize thread_info for any @tsk
+ *  - this is not related to init_task per se
  */
 #define INIT_THREAD_INFO(tsk)			\
 {						\
@@ -56,7 +54,6 @@ struct thread_info {
 	.flags      = 0,			\
 	.cpu        = 0,			\
 	.preempt_count  = INIT_PREEMPT_COUNT,	\
-	.addr_limit = KERNEL_DS,		\
 }
 
 static inline __attribute_const__ struct thread_info *current_thread_info(void)
@@ -65,7 +62,7 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
 	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * thread information flags
@@ -79,26 +76,31 @@ static inline __attribute_const__ struct thread_info *current_thread_info(void)
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_SYSCALL_AUDIT	4	/* syscall auditing active */
+#define TIF_NOTIFY_SIGNAL	5	/* signal notifications exist */
 #define TIF_SYSCALL_TRACE	15	/* syscall trace active */
-
 /* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		16
+#define TIF_SYSCALL_TRACEPOINT	17	/* syscall tracepoint instrumentation */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_NOTIFY_SIGNAL	(1<<TIF_NOTIFY_SIGNAL)
 #define _TIF_MEMDIE		(1<<TIF_MEMDIE)
+#define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		(_TIF_NEED_RESCHED | _TIF_SIGPENDING | \
-				 _TIF_NOTIFY_RESUME)
+				 _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL)
+
+#define _TIF_SYSCALL_WORK	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT)
 
 /*
  * _TIF_ALLWORK_MASK includes SYSCALL_TRACE, but we don't need it.
- * SYSCALL_TRACE is anyway seperately/unconditionally tested right after a
- * syscall, so all that reamins to be tested is _TIF_WORK_MASK
+ * SYSCALL_TRACE is anyway separately/unconditionally tested right after a
+ * syscall, so all that remains to be tested is _TIF_WORK_MASK
  */
 
 #endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/arc/include/asm/tlb-mmu1.h b/arch/arc/include/asm/tlb-mmu1.h
deleted file mode 100644
index a3083b36f5f4..000000000000
--- a/arch/arc/include/asm/tlb-mmu1.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef __ASM_TLB_MMU_V1_H__
-#define __ASM_TLB_MMU_V1_H__
-
-#include <asm/mmu.h>
-
-#if defined(__ASSEMBLY__) && (CONFIG_ARC_MMU_VER == 1)
-
-.macro TLB_WRITE_HEURISTICS
-
-#define JH_HACK1
-#undef JH_HACK2
-#undef JH_HACK3
-
-#ifdef JH_HACK3
-; Calculate set index for 2-way MMU
-; -avoiding use of GetIndex from MMU
-;   and its unpleasant LFSR pseudo-random sequence
-;
-; r1 = TLBPD0 from TLB_RELOAD above
-;
-; -- jh_ex_way_set not cleared on startup
-;    didn't want to change setup.c
-;    hence extra instruction to clean
-;
-; -- should be in cache since in same line
-;    as r0/r1 saves above
-;
-ld  r0,[jh_ex_way_sel]  ; victim pointer
-and r0,r0,1         ; clean
-xor.f   r0,r0,1         ; flip
-st  r0,[jh_ex_way_sel]  ; store back
-asr r0,r1,12        ; get set # <<1, note bit 12=R=0
-or.nz   r0,r0,1         ; set way bit
-and r0,r0,0xff      ; clean
-sr  r0,[ARC_REG_TLBINDEX]
-#endif
-
-#ifdef JH_HACK2
-; JH hack #2
-;  Faster than hack #1 in non-thrash case, but hard-coded for 2-way MMU
-;  Slower in thrash case (where it matters) because more code is executed
-;  Inefficient due to two-register paradigm of this miss handler
-;
-/* r1 = data TLBPD0 at this point */
-lr      r0,[eret]               /* instruction address */
-xor     r0,r0,r1                /* compare set #       */
-and.f   r0,r0,0x000fe000        /* 2-way MMU mask      */
-bne     88f                     /* not in same set - no need to probe */
-
-lr      r0,[eret]               /* instruction address */
-and     r0,r0,PAGE_MASK         /* VPN of instruction address */
-; lr  r1,[ARC_REG_TLBPD0]     /* Data VPN+ASID - already in r1 from TLB_RELOAD*/
-and     r1,r1,0xff              /* Data ASID */
-or      r0,r0,r1                /* Instruction address + Data ASID */
-
-lr      r1,[ARC_REG_TLBPD0]     /* save TLBPD0 containing data TLB*/
-sr      r0,[ARC_REG_TLBPD0]     /* write instruction address to TLBPD0 */
-sr      TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */
-lr      r0,[ARC_REG_TLBINDEX]   /* r0 = index where instruction is, if at all */
-sr      r1,[ARC_REG_TLBPD0]     /* restore TLBPD0 */
-
-xor     r0,r0,1                 /* flip bottom bit of data index */
-b.d     89f
-sr      r0,[ARC_REG_TLBINDEX]   /* and put it back */
-88:
-sr  TLBGetIndex, [ARC_REG_TLBCOMMAND]
-89:
-#endif
-
-#ifdef JH_HACK1
-;
-; Always checks whether instruction will be kicked out by dtlb miss
-;
-mov_s   r3, r1                  ; save PD0 prepared by TLB_RELOAD in r3
-lr      r0,[eret]               /* instruction address */
-and     r0,r0,PAGE_MASK         /* VPN of instruction address */
-bmsk    r1,r3,7                 /* Data ASID, bits 7-0 */
-or_s    r0,r0,r1                /* Instruction address + Data ASID */
-
-sr      r0,[ARC_REG_TLBPD0]     /* write instruction address to TLBPD0 */
-sr      TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */
-lr      r0,[ARC_REG_TLBINDEX]   /* r0 = index where instruction is, if at all */
-sr      r3,[ARC_REG_TLBPD0]     /* restore TLBPD0 */
-
-sr      TLBGetIndex, [ARC_REG_TLBCOMMAND]
-lr      r1,[ARC_REG_TLBINDEX]   /* r1 = index where MMU wants to put data */
-cmp     r0,r1                   /* if no match on indices, go around */
-xor.eq  r1,r1,1                 /* flip bottom bit of data index */
-sr      r1,[ARC_REG_TLBINDEX]   /* and put it back */
-#endif
-
-.endm
-
-#endif
-
-#endif
diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
index ea40ec7f6cae..1e8809ea000a 100644
--- a/arch/arc/include/asm/uaccess.h
+++ b/arch/arc/include/asm/uaccess.h
@@ -23,35 +23,6 @@
 
 #include <linux/string.h>	/* for generic string functions */
 
-
-#define __kernel_ok		(uaccess_kernel())
-
-/*
- * Algorithmically, for __user_ok() we want do:
- * 	(start < TASK_SIZE) && (start+len < TASK_SIZE)
- * where TASK_SIZE could either be retrieved from thread_info->addr_limit or
- * emitted directly in code.
- *
- * This can however be rewritten as follows:
- *	(len <= TASK_SIZE) && (start+len < TASK_SIZE)
- *
- * Because it essentially checks if buffer end is within limit and @len is
- * non-ngeative, which implies that buffer start will be within limit too.
- *
- * The reason for rewriting being, for majority of cases, @len is generally
- * compile time constant, causing first sub-expression to be compile time
- * subsumed.
- *
- * The second part would generate weird large LIMMs e.g. (0x6000_0000 - 0x10),
- * so we check for TASK_SIZE using get_fs() since the addr_limit load from mem
- * would already have been done at this call site for __kernel_ok()
- *
- */
-#define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
-				 ((addr) <= (get_fs() - (sz))))
-#define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
-				 likely(__user_ok((addr), (sz))))
-
 /*********** Single byte/hword/word copies ******************/
 
 #define __get_user_fn(sz, u, k)					\
@@ -175,8 +146,9 @@ raw_copy_from_user(void *to, const void __user *from, unsigned long n)
 	if (n == 0)
 		return 0;
 
-	/* unaligned */
-	if (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3)) {
+	/* fallback for unaligned access when hardware doesn't support */
+	if (!IS_ENABLED(CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS) &&
+	     (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3))) {
 
 		unsigned char tmp;
 
@@ -402,8 +374,9 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 	if (n == 0)
 		return 0;
 
-	/* unaligned */
-	if (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3)) {
+	/* fallback for unaligned access when hardware doesn't support */
+	if (!IS_ENABLED(CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS) &&
+	     (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3))) {
 
 		unsigned char tmp;
 
@@ -613,7 +586,7 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 	return res;
 }
 
-static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
+static inline unsigned long __clear_user(void __user *to, unsigned long n)
 {
 	long res = n;
 	unsigned char *d_char = to;
@@ -655,91 +628,11 @@ static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
 	return res;
 }
 
-static inline long
-__arc_strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res = 0;
-	char val;
-
-	if (count == 0)
-		return 0;
-
-	__asm__ __volatile__(
-	"	mov	lp_count, %5		\n"
-	"	lp	3f			\n"
-	"1:	ldb.ab  %3, [%2, 1]		\n"
-	"	breq.d	%3, 0, 3f               \n"
-	"	stb.ab  %3, [%1, 1]		\n"
-	"	add	%0, %0, 1	# Num of NON NULL bytes copied	\n"
-	"3:								\n"
-	"	.section .fixup, \"ax\"		\n"
-	"	.align 4			\n"
-	"4:	mov %0, %4		# sets @res as -EFAULT	\n"
-	"	j   3b				\n"
-	"	.previous			\n"
-	"	.section __ex_table, \"a\"	\n"
-	"	.align 4			\n"
-	"	.word   1b, 4b			\n"
-	"	.previous			\n"
-	: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
-	: "g"(-EFAULT), "r"(count)
-	: "lp_count", "memory");
-
-	return res;
-}
-
-static inline long __arc_strnlen_user(const char __user *s, long n)
-{
-	long res, tmp1, cnt;
-	char val;
-
-	__asm__ __volatile__(
-	"	mov %2, %1			\n"
-	"1:	ldb.ab  %3, [%0, 1]		\n"
-	"	breq.d  %3, 0, 2f		\n"
-	"	sub.f   %2, %2, 1		\n"
-	"	bnz 1b				\n"
-	"	sub %2, %2, 1			\n"
-	"2:	sub %0, %1, %2			\n"
-	"3:	;nop				\n"
-	"	.section .fixup, \"ax\"		\n"
-	"	.align 4			\n"
-	"4:	mov %0, 0			\n"
-	"	j   3b				\n"
-	"	.previous			\n"
-	"	.section __ex_table, \"a\"	\n"
-	"	.align 4			\n"
-	"	.word 1b, 4b			\n"
-	"	.previous			\n"
-	: "=r"(res), "=r"(tmp1), "=r"(cnt), "=r"(val)
-	: "0"(s), "1"(n)
-	: "memory");
-
-	return res;
-}
-
-#ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
-
 #define INLINE_COPY_TO_USER
 #define INLINE_COPY_FROM_USER
 
-#define __clear_user(d, n)		__arc_clear_user(d, n)
-#define __strncpy_from_user(d, s, n)	__arc_strncpy_from_user(d, s, n)
-#define __strnlen_user(s, n)		__arc_strnlen_user(s, n)
-#else
-extern unsigned long arc_clear_user_noinline(void __user *to,
-		unsigned long n);
-extern long arc_strncpy_from_user_noinline (char *dst, const char __user *src,
-		long count);
-extern long arc_strnlen_user_noinline(const char __user *src, long n);
-
-#define __clear_user(d, n)		arc_clear_user_noinline(d, n)
-#define __strncpy_from_user(d, s, n)	arc_strncpy_from_user_noinline(d, s, n)
-#define __strnlen_user(s, n)		arc_strnlen_user_noinline(s, n)
-
-#endif
+#define __clear_user			__clear_user
 
-#include <asm/segment.h>
 #include <asm-generic/uaccess.h>
 
 #endif
diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h
deleted file mode 100644
index cf5a02382e0e..000000000000
--- a/arch/arc/include/asm/unaligned.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef _ASM_ARC_UNALIGNED_H
-#define _ASM_ARC_UNALIGNED_H
-
-/* ARC700 can't handle unaligned Data accesses. */
-
-#include <asm-generic/unaligned.h>
-#include <asm/ptrace.h>
-
-#ifdef CONFIG_ARC_EMUL_UNALIGNED
-int misaligned_fixup(unsigned long address, struct pt_regs *regs,
-		     struct callee_regs *cregs);
-#else
-static inline int
-misaligned_fixup(unsigned long address, struct pt_regs *regs,
-		 struct callee_regs *cregs)
-{
-	/* Not fixed */
-	return 1;
-}
-#endif
-
-#endif /* _ASM_ARC_UNALIGNED_H */
diff --git a/arch/arc/include/asm/unistd.h b/arch/arc/include/asm/unistd.h
new file mode 100644
index 000000000000..211c230d88d6
--- /dev/null
+++ b/arch/arc/include/asm/unistd.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _ASM_ARC_UNISTD_H
+#define _ASM_ARC_UNISTD_H
+
+#include <uapi/asm/unistd.h>
+
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_CLONE
+#define __ARCH_WANT_SYS_VFORK
+#define __ARCH_WANT_SYS_FORK
+
+#define NR_syscalls __NR_syscalls
+
+#endif
diff --git a/arch/arc/include/asm/vermagic.h b/arch/arc/include/asm/vermagic.h
new file mode 100644
index 000000000000..a10257d2c62c
--- /dev/null
+++ b/arch/arc/include/asm/vermagic.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC "ARC700"
+
+#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/arc/include/asm/vmalloc.h b/arch/arc/include/asm/vmalloc.h
new file mode 100644
index 000000000000..973095aad665
--- /dev/null
+++ b/arch/arc/include/asm/vmalloc.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_ARC_VMALLOC_H
+#define _ASM_ARC_VMALLOC_H
+
+#endif /* _ASM_ARC_VMALLOC_H */
diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild
index e78470141932..2501e82a1a0a 100644
--- a/arch/arc/include/uapi/asm/Kbuild
+++ b/arch/arc/include/uapi/asm/Kbuild
@@ -1,2 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
+syscall-y += unistd_32.h
+
 generic-y += ucontext.h
diff --git a/arch/arc/include/uapi/asm/bpf_perf_event.h b/arch/arc/include/uapi/asm/bpf_perf_event.h
new file mode 100644
index 000000000000..6cb1c2823288
--- /dev/null
+++ b/arch/arc/include/uapi/asm/bpf_perf_event.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__
+#define _UAPI__ASM_BPF_PERF_EVENT_H__
+
+#include <asm/ptrace.h>
+
+typedef struct user_regs_struct bpf_user_pt_regs_t;
+
+#endif /* _UAPI__ASM_BPF_PERF_EVENT_H__ */
diff --git a/arch/arc/include/uapi/asm/page.h b/arch/arc/include/uapi/asm/page.h
index 2a97e2718a21..4606a326af5c 100644
--- a/arch/arc/include/uapi/asm/page.h
+++ b/arch/arc/include/uapi/asm/page.h
@@ -13,10 +13,8 @@
 #include <linux/const.h>
 
 /* PAGE_SHIFT determines the page size */
-#if defined(CONFIG_ARC_PAGE_SIZE_16K)
-#define PAGE_SHIFT 14
-#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
-#define PAGE_SHIFT 12
+#ifdef __KERNEL__
+#include <vdso/page.h>
 #else
 /*
  * Default 8k
@@ -26,12 +24,10 @@
  * not available
  */
 #define PAGE_SHIFT 13
-#endif
-
 #define PAGE_SIZE	_BITUL(PAGE_SHIFT)	/* Default 8K */
-#define PAGE_OFFSET	_AC(0x80000000, UL)	/* Kernel starts at 2G onwrds */
-
 #define PAGE_MASK	(~(PAGE_SIZE-1))
+#endif
 
+#define PAGE_OFFSET	_AC(0x80000000, UL)	/* Kernel starts at 2G onwrds */
 
 #endif /* _UAPI__ASM_ARC_PAGE_H */
diff --git a/arch/arc/include/uapi/asm/ptrace.h b/arch/arc/include/uapi/asm/ptrace.h
index 2a6eff57f6dd..3ae832db278c 100644
--- a/arch/arc/include/uapi/asm/ptrace.h
+++ b/arch/arc/include/uapi/asm/ptrace.h
@@ -14,7 +14,7 @@
 
 #define PTRACE_GET_THREAD_AREA	25
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * Userspace ABI: Register state needed by
  *  -ptrace (gdbserver)
@@ -53,6 +53,6 @@ struct user_regs_arcv2 {
 	unsigned long r30, r58, r59;
 };
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _UAPI__ASM_ARC_PTRACE_H */
diff --git a/arch/arc/include/uapi/asm/sigcontext.h b/arch/arc/include/uapi/asm/sigcontext.h
index 95f8a4380e11..7a5449dfcb29 100644
--- a/arch/arc/include/uapi/asm/sigcontext.h
+++ b/arch/arc/include/uapi/asm/sigcontext.h
@@ -18,6 +18,7 @@
  */
 struct sigcontext {
 	struct user_regs_struct regs;
+	struct user_regs_arcv2 v2abi;
 };
 
 #endif /* _ASM_ARC_SIGCONTEXT_H */
diff --git a/arch/arc/include/uapi/asm/swab.h b/arch/arc/include/uapi/asm/swab.h
index 02109cd48ee1..8d1f1ef44ba7 100644
--- a/arch/arc/include/uapi/asm/swab.h
+++ b/arch/arc/include/uapi/asm/swab.h
@@ -62,7 +62,7 @@
  * 8051fdc4:	st     r2,[r1,20]	; Mem op : save result back to mem
  *
  * Joern suggested a better "C" algorithm which is great since
- * (1) It is portable to any architecure
+ * (1) It is portable to any architecture
  * (2) At the same time it takes advantage of ARC ISA (rotate intrns)
  */
 
diff --git a/arch/arc/include/uapi/asm/unistd.h b/arch/arc/include/uapi/asm/unistd.h
index 5eafa1115162..cb2905c7c5da 100644
--- a/arch/arc/include/uapi/asm/unistd.h
+++ b/arch/arc/include/uapi/asm/unistd.h
@@ -7,45 +7,4 @@
  * published by the Free Software Foundation.
  */
 
-/******** no-legacy-syscalls-ABI *******/
-
-/*
- * Non-typical guard macro to enable inclusion twice in ARCH sys.c
- * That is how the Generic syscall wrapper generator works
- */
-#if !defined(_UAPI_ASM_ARC_UNISTD_H) || defined(__SYSCALL)
-#define _UAPI_ASM_ARC_UNISTD_H
-
-#define __ARCH_WANT_RENAMEAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SET_GET_RLIMIT
-#define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_SYS_CLONE
-#define __ARCH_WANT_SYS_VFORK
-#define __ARCH_WANT_SYS_FORK
-#define __ARCH_WANT_TIME32_SYSCALLS
-
-#define sys_mmap2 sys_mmap_pgoff
-
-#include <asm-generic/unistd.h>
-
-#define NR_syscalls	__NR_syscalls
-
-/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */
-#define __NR_sysfs		(__NR_arch_specific_syscall + 3)
-
-/* ARC specific syscall */
-#define __NR_cacheflush		(__NR_arch_specific_syscall + 0)
-#define __NR_arc_settls		(__NR_arch_specific_syscall + 1)
-#define __NR_arc_gettls		(__NR_arch_specific_syscall + 2)
-#define __NR_arc_usr_cmpxchg	(__NR_arch_specific_syscall + 4)
-
-__SYSCALL(__NR_cacheflush, sys_cacheflush)
-__SYSCALL(__NR_arc_settls, sys_arc_settls)
-__SYSCALL(__NR_arc_gettls, sys_arc_gettls)
-__SYSCALL(__NR_arc_usr_cmpxchg, sys_arc_usr_cmpxchg)
-__SYSCALL(__NR_sysfs, sys_sysfs)
-
-#undef __SYSCALL
-
-#endif
+#include <asm/unistd_32.h>
diff --git a/arch/arc/kernel/.gitignore b/arch/arc/kernel/.gitignore
index c5f676c3c224..bbb90f92d051 100644
--- a/arch/arc/kernel/.gitignore
+++ b/arch/arc/kernel/.gitignore
@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
 vmlinux.lds
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index de6251132310..fa94fff02419 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -3,11 +3,10 @@
 # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
 #
 
-# Pass UTS_MACHINE for user_regset definition
-CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
-
-obj-y	:= arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
+obj-y	:= head.o arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
 obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o
+obj-y	+= ctx_sw_asm.o
+
 obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
 obj-$(CONFIG_ISA_ARCV2)			+= entry-arcv2.o intc-arcv2.o
 
@@ -20,15 +19,11 @@ obj-$(CONFIG_ARC_EMUL_UNALIGNED) 	+= unaligned.o
 obj-$(CONFIG_KGDB)			+= kgdb.o
 obj-$(CONFIG_ARC_METAWARE_HLINK)	+= arc_hostlink.o
 obj-$(CONFIG_PERF_EVENTS)		+= perf_event.o
+obj-$(CONFIG_JUMP_LABEL)		+= jump_label.o
 
 obj-$(CONFIG_ARC_FPU_SAVE_RESTORE)	+= fpu.o
+ifdef CONFIG_ISA_ARCOMPACT
 CFLAGS_fpu.o   += -mdpfp
-
-ifdef CONFIG_ARC_DW2_UNWIND
-CFLAGS_ctx_sw.o += -fno-omit-frame-pointer
-obj-y += ctx_sw.o
-else
-obj-y += ctx_sw_asm.o
 endif
 
-extra-y := vmlinux.lds head.o
+always-$(KBUILD_BUILTIN) := vmlinux.lds
diff --git a/arch/arc/kernel/Makefile.syscalls b/arch/arc/kernel/Makefile.syscalls
new file mode 100644
index 000000000000..391d30ab7a83
--- /dev/null
+++ b/arch/arc/kernel/Makefile.syscalls
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+syscall_abis_32 += arc time32 renameat stat64 rlimit
diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c
index 1f621e416521..2978da85fcb6 100644
--- a/arch/arc/kernel/asm-offsets.c
+++ b/arch/arc/kernel/asm-offsets.c
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  */
+#define COMPILE_OFFSETS
 
 #include <linux/sched.h>
 #include <linux/mm.h>
@@ -12,6 +13,7 @@
 #include <asm/hardirq.h>
 #include <asm/page.h>
 
+
 int main(void)
 {
 	DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
@@ -19,13 +21,13 @@ int main(void)
 
 	BLANK();
 
-	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
 	DEFINE(THREAD_CALLEE_REG, offsetof(struct thread_struct, callee_reg));
 	DEFINE(THREAD_FAULT_ADDR,
 	       offsetof(struct thread_struct, fault_address));
 
 	BLANK();
 
+	DEFINE(THREAD_INFO_KSP, offsetof(struct thread_info, ksp));
 	DEFINE(THREAD_INFO_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(THREAD_INFO_PREEMPT_COUNT,
 	       offsetof(struct thread_info, preempt_count));
@@ -45,7 +47,8 @@ int main(void)
 	BLANK();
 
 	DEFINE(PT_status32, offsetof(struct pt_regs, status32));
-	DEFINE(PT_event, offsetof(struct pt_regs, event));
+	DEFINE(PT_event, offsetof(struct pt_regs, ecr));
+	DEFINE(PT_bta, offsetof(struct pt_regs, bta));
 	DEFINE(PT_sp, offsetof(struct pt_regs, sp));
 	DEFINE(PT_r0, offsetof(struct pt_regs, r0));
 	DEFINE(PT_r1, offsetof(struct pt_regs, r1));
@@ -60,13 +63,23 @@ int main(void)
 	DEFINE(PT_r26, offsetof(struct pt_regs, r26));
 	DEFINE(PT_ret, offsetof(struct pt_regs, ret));
 	DEFINE(PT_blink, offsetof(struct pt_regs, blink));
+	OFFSET(PT_fp, pt_regs, fp);
 	DEFINE(PT_lpe, offsetof(struct pt_regs, lp_end));
 	DEFINE(PT_lpc, offsetof(struct pt_regs, lp_count));
-	DEFINE(PT_user_r25, offsetof(struct pt_regs, user_r25));
+#ifdef CONFIG_ISA_ARCV2
+	OFFSET(PT_r12, pt_regs, r12);
+	OFFSET(PT_r30, pt_regs, r30);
+#endif
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	OFFSET(PT_r58, pt_regs, r58);
+	OFFSET(PT_r59, pt_regs, r59);
+#endif
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	OFFSET(PT_DSP_CTRL, pt_regs, DSP_CTRL);
+#endif
 
 	DEFINE(SZ_CALLEE_REGS, sizeof(struct callee_regs));
 	DEFINE(SZ_PT_REGS, sizeof(struct pt_regs));
-	DEFINE(PT_user_r25, offsetof(struct pt_regs, user_r25));
 
 	return 0;
 }
diff --git a/arch/arc/kernel/ctx_sw.c b/arch/arc/kernel/ctx_sw.c
deleted file mode 100644
index e172c3333a84..000000000000
--- a/arch/arc/kernel/ctx_sw.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * Vineetg: Aug 2009
- *  -"C" version of lowest level context switch asm macro called by schedular
- *   gcc doesn't generate the dward CFI info for hand written asm, hence can't
- *   backtrace out of it (e.g. tasks sleeping in kernel).
- *   So we cheat a bit by writing almost similar code in inline-asm.
- *  -This is a hacky way of doing things, but there is no other simple way.
- *   I don't want/intend to extend unwinding code to understand raw asm
- */
-
-#include <asm/asm-offsets.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#ifdef CONFIG_ARC_PLAT_EZNPS
-#include <plat/ctop.h>
-#endif
-
-#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
-
-struct task_struct *__sched
-__switch_to(struct task_struct *prev_task, struct task_struct *next_task)
-{
-	unsigned int tmp;
-	unsigned int prev = (unsigned int)prev_task;
-	unsigned int next = (unsigned int)next_task;
-
-	__asm__ __volatile__(
-		/* FP/BLINK save generated by gcc (standard function prologue */
-		"st.a    r13, [sp, -4]   \n\t"
-		"st.a    r14, [sp, -4]   \n\t"
-		"st.a    r15, [sp, -4]   \n\t"
-		"st.a    r16, [sp, -4]   \n\t"
-		"st.a    r17, [sp, -4]   \n\t"
-		"st.a    r18, [sp, -4]   \n\t"
-		"st.a    r19, [sp, -4]   \n\t"
-		"st.a    r20, [sp, -4]   \n\t"
-		"st.a    r21, [sp, -4]   \n\t"
-		"st.a    r22, [sp, -4]   \n\t"
-		"st.a    r23, [sp, -4]   \n\t"
-		"st.a    r24, [sp, -4]   \n\t"
-#ifndef CONFIG_ARC_CURR_IN_REG
-		"st.a    r25, [sp, -4]   \n\t"
-#else
-		"sub     sp, sp, 4      \n\t"	/* usual r25 placeholder */
-#endif
-
-		/* set ksp of outgoing task in tsk->thread.ksp */
-#if KSP_WORD_OFF <= 255
-		"st.as   sp, [%3, %1]    \n\t"
-#else
-		/*
-		 * Workaround for NR_CPUS=4k
-		 * %1 is bigger than 255 (S9 offset for st.as)
-		 */
-		"add2    r24, %3, %1     \n\t"
-		"st      sp, [r24]       \n\t"
-#endif
-
-		/*
-		 * setup _current_task with incoming tsk.
-		 * optionally, set r25 to that as well
-		 * For SMP extra work to get to &_current_task[cpu]
-		 * (open coded SET_CURR_TASK_ON_CPU)
-		 */
-#ifndef CONFIG_SMP
-		"st  %2, [@_current_task]	\n\t"
-#else
-#ifdef CONFIG_ARC_PLAT_EZNPS
-		"lr   r24, [%4]		\n\t"
-#ifndef CONFIG_EZNPS_MTM_EXT
-		"lsr  r24, r24, 4		\n\t"
-#endif
-#else
-		"lr   r24, [identity]		\n\t"
-		"lsr  r24, r24, 8		\n\t"
-		"bmsk r24, r24, 7		\n\t"
-#endif
-		"add2 r24, @_current_task, r24	\n\t"
-		"st   %2,  [r24]		\n\t"
-#endif
-#ifdef CONFIG_ARC_CURR_IN_REG
-		"mov r25, %2   \n\t"
-#endif
-
-		/* get ksp of incoming task from tsk->thread.ksp */
-		"ld.as  sp, [%2, %1]   \n\t"
-
-		/* start loading it's CALLEE reg file */
-
-#ifndef CONFIG_ARC_CURR_IN_REG
-		"ld.ab   r25, [sp, 4]   \n\t"
-#else
-		"add    sp, sp, 4       \n\t"
-#endif
-		"ld.ab   r24, [sp, 4]   \n\t"
-		"ld.ab   r23, [sp, 4]   \n\t"
-		"ld.ab   r22, [sp, 4]   \n\t"
-		"ld.ab   r21, [sp, 4]   \n\t"
-		"ld.ab   r20, [sp, 4]   \n\t"
-		"ld.ab   r19, [sp, 4]   \n\t"
-		"ld.ab   r18, [sp, 4]   \n\t"
-		"ld.ab   r17, [sp, 4]   \n\t"
-		"ld.ab   r16, [sp, 4]   \n\t"
-		"ld.ab   r15, [sp, 4]   \n\t"
-		"ld.ab   r14, [sp, 4]   \n\t"
-		"ld.ab   r13, [sp, 4]   \n\t"
-
-		/* last (ret value) = prev : although for ARC it mov r0, r0 */
-		"mov     %0, %3        \n\t"
-
-		/* FP/BLINK restore generated by gcc (standard func epilogue */
-
-		: "=r"(tmp)
-		: "n"(KSP_WORD_OFF), "r"(next), "r"(prev)
-#ifdef CONFIG_ARC_PLAT_EZNPS
-		, "i"(CTOP_AUX_LOGIC_GLOBAL_ID)
-#endif
-		: "blink"
-	);
-
-	return (struct task_struct *)tmp;
-}
diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S
index 02c461484761..48e1f21976ed 100644
--- a/arch/arc/kernel/ctx_sw_asm.S
+++ b/arch/arc/kernel/ctx_sw_asm.S
@@ -11,50 +11,54 @@
 #include <asm/entry.h>       /* For the SAVE_* macros */
 #include <asm/asm-offsets.h>
 
-#define KSP_WORD_OFF 	((TASK_THREAD + THREAD_KSP) / 4)
-
-;################### Low Level Context Switch ##########################
+; IN
+;  - r0: prev task (also current)
+;  - r1: next task
+; OUT
+;  - r0: prev task (so r0 not touched)
 
 	.section .sched.text,"ax",@progbits
-	.align 4
-	.global __switch_to
-	.type   __switch_to, @function
-__switch_to:
-	CFI_STARTPROC
-
-	/* Save regs on kernel mode stack of task */
-	st.a    blink, [sp, -4]
-	st.a    fp, [sp, -4]
-	SAVE_CALLEE_SAVED_KERNEL
+ENTRY_CFI(__switch_to)
 
-	/* Save the now KSP in task->thread.ksp */
-#if KSP_WORD_OFF  <= 255
-	st.as  sp, [r0, KSP_WORD_OFF]
-#else
-	/* Workaround for NR_CPUS=4k as ST.as can only take s9 offset */
-	add2	r24, r0, KSP_WORD_OFF
-	st	sp, [r24]
-#endif
-	/*
-	* Return last task in r0 (return reg)
-	* On ARC, Return reg = First Arg reg = r0.
-	* Since we already have last task in r0,
-	* don't need to do anything special to return it
-	*/
+	/* save kernel stack frame regs of @prev task */
+	push	blink
+	CFI_DEF_CFA_OFFSET 4
+	CFI_OFFSET r31, -4
+
+	push	fp
+	CFI_DEF_CFA_OFFSET 8
+	CFI_OFFSET r27, -8
+
+	mov	fp, sp
+	CFI_DEF_CFA_REGISTER r27
+
+	/* kernel mode callee regs of @prev */
+	SAVE_CALLEE_SAVED_KERNEL
 
 	/*
-	 * switch to new task, contained in r1
-	 * Temp reg r3 is required to get the ptr to store val
+	 * save final SP to @prev->thread_info.ksp
+	 * @prev is "current" so thread_info derived from SP
 	 */
-	SET_CURR_TASK_ON_CPU  r1, r3
+	GET_CURR_THR_INFO_FROM_SP  r10
+	st	sp,  [r10, THREAD_INFO_KSP]
+
+	/* update @next in _current_task[] and GP register caching it */
+	SET_CURR_TASK_ON_CPU  r1, r10
 
-	/* reload SP with kernel mode stack pointer in task->thread.ksp */
-	ld.as  sp, [r1, (TASK_THREAD + THREAD_KSP)/4]
+	/* load SP from @next->thread_info.ksp */
+	ld	r10, [r1, TASK_THREAD_INFO]
+	ld	sp,  [r10, THREAD_INFO_KSP]
 
-	/* restore the registers */
+	/* restore callee regs, stack frame regs of @next */
 	RESTORE_CALLEE_SAVED_KERNEL
-	ld.ab   fp, [sp, 4]
-	ld.ab   blink, [sp, 4]
-	j       [blink]
 
+	pop	fp
+	CFI_RESTORE r27
+	CFI_DEF_CFA r28, 4
+
+	pop	blink
+	CFI_RESTORE r31
+	CFI_DEF_CFA_OFFSET 0
+
+	j      [blink]
 END_CFI(__switch_to)
diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c
index fa86d13df5ed..cc6ac7d128aa 100644
--- a/arch/arc/kernel/devtree.c
+++ b/arch/arc/kernel/devtree.c
@@ -12,6 +12,7 @@
 #include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <asm/mach_desc.h>
+#include <asm/serial.h>
 
 #ifdef CONFIG_SERIAL_EARLYCON
 
@@ -29,8 +30,6 @@ static void __init arc_set_early_base_baud(unsigned long dt_root)
 	else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp") ||
 		 of_flat_dt_is_compatible(dt_root, "snps,hsdk"))
 		arc_base_baud = 33333333;	/* Fixed 33MHz clk (AXS10x & HSDK) */
-	else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps"))
-		arc_base_baud = 800000000;      /* Fixed 800MHz clk (NPS) */
 	else
 		arc_base_baud = 50000000;	/* Fixed default 50MHz */
 }
@@ -63,7 +62,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt)
 	const struct machine_desc *mdesc;
 	unsigned long dt_root;
 
-	if (!early_init_dt_scan(dt))
+	if (!early_init_dt_scan(dt, __pa(dt)))
 		return NULL;
 
 	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);
diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c
index d04837d91b40..ccc7e8c39eb3 100644
--- a/arch/arc/kernel/disasm.c
+++ b/arch/arc/kernel/disasm.c
@@ -339,7 +339,7 @@ void __kprobes disasm_instr(unsigned long addr, struct disasm_state *state,
 
 	case op_LDWX_S:	/* LDWX_S c, [b, u6] */
 		state->x = 1;
-		/* intentional fall-through */
+		fallthrough;
 
 	case op_LDW_S:	/* LDW_S c, [b, u6] */
 		state->zz = 2;
@@ -366,7 +366,7 @@ void __kprobes disasm_instr(unsigned long addr, struct disasm_state *state,
 	case op_SP:	/* LD_S|LDB_S b,[sp,u7], ST_S|STB_S b,[sp,u7] */
 		/* note: we are ignoring possibility of:
 		 * ADD_S, SUB_S, PUSH_S, POP_S as these should not
-		 * cause unaliged exception anyway */
+		 * cause unaligned exception anyway */
 		state->write = BITS(state->words[0], 6, 6);
 		state->zz = BITS(state->words[0], 5, 5);
 		if (state->zz)
@@ -434,14 +434,31 @@ long __kprobes get_reg(int reg, struct pt_regs *regs,
 {
 	long *p;
 
+#if defined(CONFIG_ISA_ARCOMPACT)
 	if (reg <= 12) {
 		p = &regs->r0;
 		return p[-reg];
 	}
+#else /* CONFIG_ISA_ARCV2 */
+	if (reg <= 11) {
+		p = &regs->r0;
+		return p[reg];
+	}
 
+	if (reg == 12)
+		return regs->r12;
+	if (reg == 30)
+		return regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	if (reg == 58)
+		return regs->r58;
+	if (reg == 59)
+		return regs->r59;
+#endif
+#endif
 	if (cregs && (reg <= 25)) {
 		p = &cregs->r13;
-		return p[13-reg];
+		return p[13 - reg];
 	}
 
 	if (reg == 26)
@@ -461,6 +478,7 @@ void __kprobes set_reg(int reg, long val, struct pt_regs *regs,
 {
 	long *p;
 
+#if defined(CONFIG_ISA_ARCOMPACT)
 	switch (reg) {
 	case 0 ... 12:
 		p = &regs->r0;
@@ -469,7 +487,7 @@ void __kprobes set_reg(int reg, long val, struct pt_regs *regs,
 	case 13 ... 25:
 		if (cregs) {
 			p = &cregs->r13;
-			p[13-reg] = val;
+			p[13 - reg] = val;
 		}
 		break;
 	case 26:
@@ -487,6 +505,48 @@ void __kprobes set_reg(int reg, long val, struct pt_regs *regs,
 	default:
 		break;
 	}
+#else /* CONFIG_ISA_ARCV2 */
+	switch (reg) {
+	case 0 ... 11:
+		p = &regs->r0;
+		p[reg] = val;
+		break;
+	case 12:
+		regs->r12 = val;
+		break;
+	case 13 ... 25:
+		if (cregs) {
+			p = &cregs->r13;
+			p[13 - reg] = val;
+		}
+		break;
+	case 26:
+		regs->r26 = val;
+		break;
+	case 27:
+		regs->fp = val;
+		break;
+	case 28:
+		regs->sp = val;
+		break;
+	case 30:
+		regs->r30 = val;
+		break;
+	case 31:
+		regs->blink = val;
+		break;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	case 58:
+		regs->r58 = val;
+		break;
+	case 59:
+		regs->r59 = val;
+		break;
+#endif
+	default:
+		break;
+	}
+#endif
 }
 
 /*
@@ -503,7 +563,6 @@ int __kprobes disasm_next_pc(unsigned long pc, struct pt_regs *regs,
 {
 	struct disasm_state instr;
 
-	memset(&instr, 0, sizeof(struct disasm_state));
 	disasm_instr(pc, &instr, 0, regs, cregs);
 
 	*next_pc = pc + instr.instr_len;
diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
index 12d5f12d10d2..e238b5fd3c8c 100644
--- a/arch/arc/kernel/entry-arcv2.S
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -5,11 +5,12 @@
  * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
  */
 
-#include <linux/linkage.h>   /* ARC_{EXTRY,EXIT} */
+#include <linux/linkage.h>   /* ARC_{ENTRY,EXIT} */
 #include <asm/entry.h>       /* SAVE_ALL_{INT1,INT2,TRAP...} */
 #include <asm/errno.h>
 #include <asm/arcregs.h>
 #include <asm/irqflags.h>
+#include <asm/mmu.h>
 
 ; A maximum number of supported interrupts in the core interrupt controller.
 ; This number is not equal to the maximum interrupt number (256) because
@@ -30,7 +31,7 @@ VECTOR	res_service		; Reset Vector
 VECTOR	mem_service		; Mem exception
 VECTOR	instr_service		; Instrn Error
 VECTOR	EV_MachineCheck		; Fatal Machine check
-VECTOR	EV_TLBMissI		; Intruction TLB miss
+VECTOR	EV_TLBMissI		; Instruction TLB miss
 VECTOR	EV_TLBMissD		; Data TLB miss
 VECTOR	EV_TLBProtV		; Protection Violation
 VECTOR	EV_PrivilegeV		; Privilege Violation
@@ -75,11 +76,11 @@ ENTRY(handle_interrupt)
 	# query in hard ISR path would return false (since .IE is set) which would
 	# trips genirq interrupt handling asserts.
 	#
-	# So do a "soft" disable of interrutps here.
+	# So do a "soft" disable of interrupts here.
 	#
 	# Note this disable is only for consistent book-keeping as further interrupts
 	# will be disabled anyways even w/o this. Hardware tracks active interrupts
-	# seperately in AUX_IRQ_ACT.active and will not take new interrupts
+	# separately in AUX_IRQ_ACT.active and will not take new interrupts
 	# unless this one returns (or higher prio becomes pending in 2-prio scheme)
 
 	IRQ_DISABLE
@@ -124,11 +125,6 @@ ENTRY(mem_service)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_memory_error
 	b   ret_from_exception
 END(mem_service)
@@ -137,11 +133,6 @@ ENTRY(EV_Misaligned)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]	; Faulting Data address
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	SAVE_CALLEE_SAVED_USER
 	mov r2, sp              ; callee_regs
 
@@ -162,11 +153,6 @@ ENTRY(EV_TLBProtV)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]	; Faulting Data address
-	mov r1, sp	; pt_regs
-
-	FAKE_RET_FROM_EXCPN
-
 	mov blink, ret_from_exception
 	b   do_page_fault
 
diff --git a/arch/arc/kernel/entry-compact.S b/arch/arc/kernel/entry-compact.S
index 5cb0cd7e4eab..774c03cc1d1a 100644
--- a/arch/arc/kernel/entry-compact.S
+++ b/arch/arc/kernel/entry-compact.S
@@ -254,18 +254,7 @@ END(handle_interrupt_level1)
 
 ENTRY(EV_TLBProtV)
 
-	EXCEPTION_PROLOGUE
-
-	mov r2, r10	; ECR set into r10 already
-	lr  r0, [efa]	; Faulting Data address (not part of pt_regs saved above)
-
-	; Exception auto-disables further Intr/exceptions.
-	; Re-enable them by pretending to return from exception
-	; (so rest of handler executes in pure K mode)
-
-	FAKE_RET_FROM_EXCPN
-
-	mov   r1, sp	; Handle to pt_regs
+	EXCEPTION_PROLOGUE	; ECR returned in r10
 
 	;------ (5) Type of Protection Violation? ----------
 	;
@@ -273,8 +262,7 @@ ENTRY(EV_TLBProtV)
 	;   -Access Violation	: 00_23_(00|01|02|03)_00
 	;			         x  r  w  r+w
 	;   -Unaligned Access	: 00_23_04_00
-	;
-	bbit1 r2, ECR_C_BIT_PROTV_MISALIG_DATA, 4f
+	bbit1 r10, ECR_C_BIT_PROTV_MISALIG_DATA, 4f
 
 	;========= (6a) Access Violation Processing ========
 	bl  do_page_fault
@@ -303,9 +291,6 @@ END(EV_TLBProtV)
 ENTRY(call_do_page_fault)
 
 	EXCEPTION_PROLOGUE
-	lr  r0, [efa]	; Faulting Data address
-	mov   r1, sp
-	FAKE_RET_FROM_EXCPN
 
 	mov blink, ret_from_exception
 	b  do_page_fault
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 72be01270e24..3c7e74aba679 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -29,12 +29,24 @@ ENTRY(sys_clone_wrapper)
 	DISCARD_CALLEE_SAVED_USER
 
 	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz  tracesys_exit
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys_exit
 
 	b .Lret_from_system_call
 END(sys_clone_wrapper)
 
+ENTRY(sys_clone3_wrapper)
+	SAVE_CALLEE_SAVED_USER
+	bl  @sys_clone3
+	DISCARD_CALLEE_SAVED_USER
+
+	GET_CURR_THR_INFO_FLAGS   r10
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys_exit
+
+	b .Lret_from_system_call
+END(sys_clone3_wrapper)
+
 ENTRY(ret_from_fork)
 	; when the forked child comes here from the __switch_to function
 	; r0 has the last task pointer.
@@ -68,11 +80,6 @@ ENTRY(instr_service)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_insterror_or_kprobe
 	b   ret_from_exception
 END(instr_service)
@@ -83,19 +90,15 @@ END(instr_service)
 
 ENTRY(EV_MachineCheck)
 
-	EXCEPTION_PROLOGUE
+	EXCEPTION_PROLOGUE_KEEP_AE	; ECR returned in r10
 
-	lr  r2, [ecr]
 	lr  r0, [efa]
 	mov r1, sp
 
-	; hardware auto-disables MMU, re-enable it to allow kernel vaddr
-	; access for say stack unwinding of modules for crash dumps
-	lr	r3, [ARC_REG_PID]
-	or	r3, r3, MMU_ENABLE
-	sr	r3, [ARC_REG_PID]
+	; MC exceptions disable MMU
+	ARC_MMU_REENABLE r3
 
-	lsr  	r3, r2, 8
+	lsr  	r3, r10, 8
 	bmsk 	r3, r3, 7
 	brne    r3, ECR_C_MCHK_DUP_TLB, 1f
 
@@ -120,11 +123,6 @@ ENTRY(EV_PrivilegeV)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_privilege_fault
 	b   ret_from_exception
 END(EV_PrivilegeV)
@@ -136,11 +134,6 @@ ENTRY(EV_Extension)
 
 	EXCEPTION_PROLOGUE
 
-	lr  r0, [efa]
-	mov r1, sp
-
-	FAKE_RET_FROM_EXCPN
-
 	bl  do_extension_fault
 	b   ret_from_exception
 END(EV_Extension)
@@ -151,22 +144,20 @@ END(EV_Extension)
 ; syscall Tracing
 ; ---------------------------------------------
 tracesys:
-	; save EFA in case tracer wants the PC of traced task
-	; using ERET won't work since next-PC has already committed
-	lr  r12, [efa]
+	; safekeep EFA (r12) if syscall tracer wanted PC
+	; for traps, ERET is pre-commit so points to next-PC
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r11
 	st  r12, [r11, THREAD_FAULT_ADDR]	; thread.fault_address
 
-	; PRE Sys Call Ptrace hook
-	mov r0, sp			; pt_regs needed
-	bl  @syscall_trace_entry
+	; PRE syscall trace hook
+	mov r0, sp				; pt_regs
+	bl  @syscall_trace_enter
 
 	; Tracing code now returns the syscall num (orig or modif)
 	mov r8, r0
 
 	; Do the Sys Call as we normally would.
-	; Validate the Sys Call number
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     tracesys_exit
 
@@ -182,83 +173,74 @@ tracesys:
 	ld  r6, [sp, PT_r6]
 	ld  r7, [sp, PT_r7]
 	ld.as   r9, [sys_call_table, r8]
-	jl      [r9]        ; Entry into Sys Call Handler
+	jl      [r9]
 
 tracesys_exit:
-	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
+	st  r0, [sp, PT_r0]
 
-	;POST Sys Call Ptrace Hook
+	; POST syscall trace hook
+	mov r0, sp		; pt_regs needed
 	bl  @syscall_trace_exit
-	b   ret_from_exception ; NOT ret_from_system_call at is saves r0 which
-	; we'd done before calling post hook above
+
+	; don't call ret_from_system_call as it saves r0, already done above
+	b   ret_from_exception
 
 ; ---------------------------------------------
 ; Breakpoint TRAP
 ; ---------------------------------------------
 trap_with_param:
+	mov r0, r12	; EFA in case ptracer/gdb wants stop_pc
+	mov r1, sp	; pt_regs
 
-	; stop_pc info by gdb needs this info
-	lr  r0, [efa]
-	mov r1, sp
-
-	; Now that we have read EFA, it is safe to do "fake" rtie
-	;   and get out of CPU exception mode
-	FAKE_RET_FROM_EXCPN
-
-	; Save callee regs in case gdb wants to have a look
-	; SP will grow up by size of CALLEE Reg-File
-	; NOTE: clobbers r12
+	; save callee regs in case tracer/gdb wants to peek
 	SAVE_CALLEE_SAVED_USER
 
-	; save location of saved Callee Regs @ thread_struct->pc
+	; safekeep ref to callee regs
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
 	st  sp, [r10, THREAD_CALLEE_REG]
 
-	; Call the trap handler
+	; call the non syscall trap handler
 	bl  do_non_swi_trap
 
-	; unwind stack to discard Callee saved Regs
+	; unwind stack to discard callee regs
 	DISCARD_CALLEE_SAVED_USER
 
 	b   ret_from_exception
 
 ; ---------------------------------------------
 ; syscall TRAP
-; ABI: (r0-r7) upto 8 args, (r8) syscall number
+; ABI: (r0-r7) up to 8 args, (r8) syscall number
 ; ---------------------------------------------
 
 ENTRY(EV_Trap)
 
-	EXCEPTION_PROLOGUE
+	EXCEPTION_PROLOGUE_KEEP_AE
+
+	lr  r12, [efa]
+
+	FAKE_RET_FROM_EXCPN
 
-	;============ TRAP 1   :breakpoints
-	; Check ECR for trap with arg (PROLOGUE ensures r10 has ECR)
+	;============ TRAP N : breakpoints, kprobes etc
 	bmsk.f 0, r10, 7
 	bnz    trap_with_param
 
-	;============ TRAP  (no param): syscall top level
-
-	; First return from Exception to pure K mode (Exception/IRQs renabled)
-	FAKE_RET_FROM_EXCPN
+	;============ TRAP 0 (no param): syscall
 
-	; If syscall tracing ongoing, invoke pre-post-hooks
+	; syscall tracing ongoing, invoke pre-post-hooks around syscall
 	GET_CURR_THR_INFO_FLAGS   r10
-	btst r10, TIF_SYSCALL_TRACE
-	bnz tracesys  ; this never comes back
+	and.f 0, r10, _TIF_SYSCALL_WORK
+	bnz   tracesys  ; this never comes back
 
 	;============ Normal syscall case
 
-	; syscall num shd not exceed the total system calls avail
-	cmp     r8,  NR_syscalls
+	cmp     r8,  NR_syscalls - 1
 	mov.hi  r0, -ENOSYS
 	bhi     .Lret_from_system_call
 
-	; Offset into the syscall_table and call handler
 	ld.as   r9,[sys_call_table, r8]
-	jl      [r9]        ; Entry into Sys Call Handler
+	jl      [r9]
 
 .Lret_from_system_call:
-
 	st  r0, [sp, PT_r0]     ; sys call return value in pt_regs
 
 	; fall through to ret_from_exception
@@ -301,7 +283,8 @@ resume_user_mode_begin:
 	mov r0, sp	; pt_regs for arg to do_signal()/do_notify_resume()
 
 	GET_CURR_THR_INFO_FLAGS   r9
-	bbit0  r9, TIF_SIGPENDING, .Lchk_notify_resume
+	and.f  0,  r9, _TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL
+	bz .Lchk_notify_resume
 
 	; Normal Trap/IRQ entry only saves Scratch (caller-saved) regs
 	; in pt_reg since the "C" ABI (kernel code) will automatically
@@ -313,7 +296,7 @@ resume_user_mode_begin:
 	;      tracer might call PEEKUSR(CALLEE reg)
 	;
 	; NOTE: SP will grow up by size of CALLEE Reg-File
-	SAVE_CALLEE_SAVED_USER		; clobbers r12
+	SAVE_CALLEE_SAVED_USER
 
 	; save location of saved Callee Regs @ thread_struct->callee
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r10
@@ -337,11 +320,11 @@ resume_user_mode_begin:
 resume_kernel_mode:
 
 	; Disable Interrupts from this point on
-	; CONFIG_PREEMPT: This is a must for preempt_schedule_irq()
-	; !CONFIG_PREEMPT: To ensure restore_regs is intr safe
+	; CONFIG_PREEMPTION: This is a must for preempt_schedule_irq()
+	; !CONFIG_PREEMPTION: To ensure restore_regs is intr safe
 	IRQ_DISABLE	r9
 
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPTION
 
 	; Can't preempt if preemption disabled
 	GET_CURR_THR_INFO_FROM_SP   r10
diff --git a/arch/arc/kernel/fpu.c b/arch/arc/kernel/fpu.c
index 07e22b563fbb..ec640219d989 100644
--- a/arch/arc/kernel/fpu.c
+++ b/arch/arc/kernel/fpu.c
@@ -6,7 +6,9 @@
  */
 
 #include <linux/sched.h>
-#include <asm/switch_to.h>
+#include <asm/fpu.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
 
 /*
  * To save/restore FPU regs, simplest scheme would use LR/SR insns.
@@ -50,3 +52,31 @@ void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 		: "r" (zero), "r" (*(readfrom + 3)), "r" (*(readfrom + 2))
 	);
 }
+
+#else
+
+void fpu_init_task(struct pt_regs *regs)
+{
+	const unsigned int fwe = 0x80000000;
+
+	/* default rounding mode */
+	write_aux_reg(ARC_REG_FPU_CTRL, 0x100);
+
+	/* Initialize to zero: setting requires FWE be set */
+	write_aux_reg(ARC_REG_FPU_STATUS, fwe);
+}
+
+void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
+{
+	struct arc_fpu *save = &prev->thread.fpu;
+	struct arc_fpu *restore = &next->thread.fpu;
+	const unsigned int fwe = 0x80000000;
+
+	save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL);
+	save->status = read_aux_reg(ARC_REG_FPU_STATUS);
+
+	write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl);
+	write_aux_reg(ARC_REG_FPU_STATUS, (fwe | restore->status));
+}
+
+#endif
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
index 6f41265f6250..8d541f53fae3 100644
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -14,6 +14,7 @@
 #include <asm/entry.h>
 #include <asm/arcregs.h>
 #include <asm/cache.h>
+#include <asm/dsp-impl.h>
 #include <asm/irqflags.h>
 
 .macro CPU_EARLY_SETUP
@@ -58,7 +59,33 @@
 	bclr	r5, r5, STATUS_AD_BIT
 #endif
 	kflag	r5
-#endif
+
+#ifdef CONFIG_ARC_LPB_DISABLE
+	lr	r5, [ARC_REG_LPB_BUILD]
+	breq    r5, 0, 1f		; LPB doesn't exist
+	mov	r5, 1
+	sr	r5, [ARC_REG_LPB_CTRL]
+1:
+#endif /* CONFIG_ARC_LPB_DISABLE */
+
+	/* On HSDK, CCMs need to remapped super early */
+#ifdef CONFIG_ARC_SOC_HSDK
+	mov	r6, 0x60000000
+	lr	r5, [ARC_REG_ICCM_BUILD]
+	breq	r5, 0, 1f
+	sr	r6, [ARC_REG_AUX_ICCM]
+1:
+	lr	r5, [ARC_REG_DCCM_BUILD]
+	breq	r5, 0, 2f
+	sr	r6, [ARC_REG_AUX_DCCM]
+2:
+#endif	/* CONFIG_ARC_SOC_HSDK */
+
+#endif	/* CONFIG_ISA_ARCV2 */
+
+	; Config DSP_CTRL properly, so kernel may use integer multiply,
+	; multiply-accumulate, and divide operations
+	DSP_EARLY_INIT
 .endm
 
 	.section .init.text, "ax",@progbits
@@ -138,7 +165,7 @@ ENTRY(first_lines_of_secondary)
 	; setup stack (fp, sp)
 	mov	fp, 0
 
-	; set it's stack base to tsk->thread_info bottom
+	; set its stack base to tsk->thread_info bottom
 	GET_TSK_STACK_BASE r0, sp
 
 	j	start_kernel_secondary
diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c
index 5cda19d0aa91..809edc59af25 100644
--- a/arch/arc/kernel/intc-arcv2.c
+++ b/arch/arc/kernel/intc-arcv2.c
@@ -56,7 +56,7 @@ void arc_init_IRQ(void)
 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
 
 	/*
-	 * ARCv2 core intc provides multiple interrupt priorities (upto 16).
+	 * ARCv2 core intc provides multiple interrupt priorities (up to 16).
 	 * Typical builds though have only two levels (0-high, 1-low)
 	 * Linux by default uses lower prio 1 for most irqs, reserving 0 for
 	 * NMI style interrupts in future (say perf)
@@ -108,7 +108,7 @@ static void arcv2_irq_unmask(struct irq_data *data)
 	write_aux_reg(AUX_IRQ_ENABLE, 1);
 }
 
-void arcv2_irq_enable(struct irq_data *data)
+static void arcv2_irq_enable(struct irq_data *data)
 {
 	/* set default priority */
 	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
@@ -170,7 +170,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL);
+	root_domain = irq_domain_create_linear(of_fwnode_handle(intc), nr_cpu_irqs, &arcv2_irq_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
@@ -178,7 +178,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	 * Needed for primary domain lookup to succeed
 	 * This is a primary irqchip, and can never have a parent
 	 */
-	irq_set_default_host(root_domain);
+	irq_set_default_domain(root_domain);
 
 #ifdef CONFIG_SMP
 	irq_create_mapping(root_domain, IPI_IRQ);
diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c
index a86641b91e65..1b159e9e0234 100644
--- a/arch/arc/kernel/intc-compact.c
+++ b/arch/arc/kernel/intc-compact.c
@@ -112,8 +112,9 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	if (parent)
 		panic("DeviceTree incore intc not a root irq controller\n");
 
-	root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS,
-					    &arc_intc_domain_ops, NULL);
+	root_domain = irq_domain_create_linear(of_fwnode_handle(intc),
+					       NR_CPU_IRQS,
+					       &arc_intc_domain_ops, NULL);
 	if (!root_domain)
 		panic("root irq domain not avail\n");
 
@@ -121,7 +122,7 @@ init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
 	 * Needed for primary domain lookup to succeed
 	 * This is a primary irqchip, and can never have a parent
 	 */
-	irq_set_default_host(root_domain);
+	irq_set_default_domain(root_domain);
 
 	return 0;
 }
@@ -142,7 +143,7 @@ IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
  *    Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times.
  *    Here local_irq_enable( ) shd not re-enable lower priority interrupts
  * -If called from soft-ISR, it must re-enable all interrupts
- *    soft ISR are low prioity jobs which can be very slow, thus all IRQs
+ *    soft ISR are low priority jobs which can be very slow, thus all IRQs
  *    must be enabled while they run.
  *    Now hardware context wise we may still be in L2 ISR (not done rtie)
  *    still we must re-enable both L1 and L2 IRQs
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
index ef909dd4b40c..dd09b58ff82d 100644
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -6,6 +6,8 @@
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
 #include <asm/mach_desc.h>
+
+#include <asm/irq_regs.h>
 #include <asm/smp.h>
 
 /*
@@ -39,5 +41,11 @@ void __init init_IRQ(void)
  */
 void arch_do_IRQ(unsigned int hwirq, struct pt_regs *regs)
 {
-	handle_domain_irq(NULL, hwirq, regs);
+	struct pt_regs *old_regs;
+
+	irq_enter();
+	old_regs = set_irq_regs(regs);
+	generic_handle_domain_irq(NULL, hwirq);
+	set_irq_regs(old_regs);
+	irq_exit();
 }
diff --git a/arch/arc/kernel/jump_label.c b/arch/arc/kernel/jump_label.c
new file mode 100644
index 000000000000..70b74a5d047b
--- /dev/null
+++ b/arch/arc/kernel/jump_label.c
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/kernel.h>
+#include <linux/jump_label.h>
+
+#include "asm/cacheflush.h"
+
+#define JUMPLABEL_ERR	"ARC: jump_label: ERROR: "
+
+/* Halt system on fatal error to make debug easier */
+#define arc_jl_fatal(format...)						\
+({									\
+	pr_err(JUMPLABEL_ERR format);					\
+	BUG();								\
+})
+
+static inline u32 arc_gen_nop(void)
+{
+	/* 1x 32bit NOP in middle endian */
+	return 0x7000264a;
+}
+
+/*
+ * Atomic update of patched instruction is only available if this
+ * instruction doesn't cross L1 cache line boundary. You can read about
+ * the way we achieve this in arc/include/asm/jump_label.h
+ */
+static inline void instruction_align_assert(void *addr, int len)
+{
+	unsigned long a = (unsigned long)addr;
+
+	if ((a >> L1_CACHE_SHIFT) != ((a + len - 1) >> L1_CACHE_SHIFT))
+		arc_jl_fatal("instruction (addr %px) cross L1 cache line border",
+			     addr);
+}
+
+/*
+ * ARCv2 'Branch unconditionally' instruction:
+ * 00000ssssssssss1SSSSSSSSSSNRtttt
+ * s S[n:0] lower bits signed immediate (number is bitfield size)
+ * S S[m:n+1] upper bits signed immediate (number is bitfield size)
+ * t S[24:21] upper bits signed immediate (branch unconditionally far)
+ * N N <.d> delay slot mode
+ * R R Reserved
+ */
+static inline u32 arc_gen_branch(jump_label_t pc, jump_label_t target)
+{
+	u32 instruction_l, instruction_r;
+	u32 pcl = pc & GENMASK(31, 2);
+	u32 u_offset = target - pcl;
+	u32 s, S, t;
+
+	/*
+	 * Offset in 32-bit branch instruction must to fit into s25.
+	 * Something is terribly broken if we get such huge offset within one
+	 * function.
+	 */
+	if ((s32)u_offset < -16777216 || (s32)u_offset > 16777214)
+		arc_jl_fatal("gen branch with offset (%d) not fit in s25",
+			     (s32)u_offset);
+
+	/*
+	 * All instructions are aligned by 2 bytes so we should never get offset
+	 * here which is not 2 bytes aligned.
+	 */
+	if (u_offset & 0x1)
+		arc_jl_fatal("gen branch with offset (%d) unaligned to 2 bytes",
+			     (s32)u_offset);
+
+	s = (u_offset >> 1)  & GENMASK(9, 0);
+	S = (u_offset >> 11) & GENMASK(9, 0);
+	t = (u_offset >> 21) & GENMASK(3, 0);
+
+	/* 00000ssssssssss1 */
+	instruction_l = (s << 1) | 0x1;
+	/* SSSSSSSSSSNRtttt */
+	instruction_r = (S << 6) | t;
+
+	return (instruction_r << 16) | (instruction_l & GENMASK(15, 0));
+}
+
+void arch_jump_label_transform(struct jump_entry *entry,
+			       enum jump_label_type type)
+{
+	jump_label_t *instr_addr = (jump_label_t *)entry->code;
+	u32 instr;
+
+	instruction_align_assert(instr_addr, JUMP_LABEL_NOP_SIZE);
+
+	if (type == JUMP_LABEL_JMP)
+		instr = arc_gen_branch(entry->code, entry->target);
+	else
+		instr = arc_gen_nop();
+
+	WRITE_ONCE(*instr_addr, instr);
+	flush_icache_range(entry->code, entry->code + JUMP_LABEL_NOP_SIZE);
+}
+
+#ifdef CONFIG_ARC_DBG_JUMP_LABEL
+#define SELFTEST_MSG	"ARC: instruction generation self-test: "
+
+struct arc_gen_branch_testdata {
+	jump_label_t pc;
+	jump_label_t target_address;
+	u32 expected_instr;
+};
+
+static __init int branch_gen_test(const struct arc_gen_branch_testdata *test)
+{
+	u32 instr_got;
+
+	instr_got = arc_gen_branch(test->pc, test->target_address);
+	if (instr_got == test->expected_instr)
+		return 0;
+
+	pr_err(SELFTEST_MSG "FAIL:\n arc_gen_branch(0x%08x, 0x%08x) != 0x%08x, got 0x%08x\n",
+	       test->pc, test->target_address,
+	       test->expected_instr, instr_got);
+
+	return -EFAULT;
+}
+
+/*
+ * Offset field in branch instruction is not continuous. Test all
+ * available offset field and sign combinations. Test data is generated
+ * from real working code.
+ */
+static const struct arc_gen_branch_testdata arcgenbr_test_data[] __initconst = {
+	{0x90007548, 0x90007514, 0xffcf07cd}, /* tiny (-52) offs */
+	{0x9000c9c0, 0x9000c782, 0xffcf05c3}, /* tiny (-574) offs */
+	{0x9000cc1c, 0x9000c782, 0xffcf0367}, /* tiny (-1178) offs */
+	{0x9009dce0, 0x9009d106, 0xff8f0427}, /* small (-3034) offs */
+	{0x9000f5de, 0x90007d30, 0xfc0f0755}, /* big  (-30892) offs */
+	{0x900a2444, 0x90035f64, 0xc9cf0321}, /* huge (-443616) offs */
+	{0x90007514, 0x9000752c, 0x00000019}, /* tiny (+24) offs */
+	{0x9001a578, 0x9001a77a, 0x00000203}, /* tiny (+514) offs */
+	{0x90031ed8, 0x90032634, 0x0000075d}, /* tiny (+1884) offs */
+	{0x9008c7f2, 0x9008d3f0, 0x00400401}, /* small (+3072) offs */
+	{0x9000bb38, 0x9003b340, 0x17c00009}, /* big  (+194568) offs */
+	{0x90008f44, 0x90578d80, 0xb7c2063d}  /* huge (+5701180) offs */
+};
+
+static __init int instr_gen_test(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(arcgenbr_test_data); i++)
+		if (branch_gen_test(&arcgenbr_test_data[i]))
+			return -EFAULT;
+
+	pr_info(SELFTEST_MSG "OK\n");
+
+	return 0;
+}
+early_initcall(instr_gen_test);
+
+#endif /* CONFIG_ARC_DBG_JUMP_LABEL */
diff --git a/arch/arc/kernel/kgdb.c b/arch/arc/kernel/kgdb.c
index ecfbc42d3a40..4f2b5951454f 100644
--- a/arch/arc/kernel/kgdb.c
+++ b/arch/arc/kernel/kgdb.c
@@ -140,6 +140,7 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
 		ptr = &remcomInBuffer[1];
 		if (kgdb_hex2long(&ptr, &addr))
 			regs->ret = addr;
+		fallthrough;
 
 	case 'D':
 	case 'k':
@@ -174,7 +175,7 @@ void kgdb_trap(struct pt_regs *regs)
 	 * with trap_s 4 (compiled) breakpoints, continuation needs to
 	 * start after the breakpoint.
 	 */
-	if (regs->ecr_param == 3)
+	if (regs->ecr.param == 3)
 		instruction_pointer(regs) -= BREAK_INSTR_SIZE;
 
 	kgdb_handle_exception(1, SIGTRAP, 0, regs);
diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c
index 7d3efe83cba7..f8e2960832d9 100644
--- a/arch/arc/kernel/kprobes.c
+++ b/arch/arc/kernel/kprobes.c
@@ -190,7 +190,8 @@ static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs)
 	}
 }
 
-int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
+static int
+__kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 {
 	struct kprobe *p;
 	struct kprobe_ctlblk *kcb;
@@ -241,8 +242,8 @@ int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 	return 0;
 }
 
-static int __kprobes arc_post_kprobe_handler(unsigned long addr,
-					 struct pt_regs *regs)
+static int
+__kprobes arc_post_kprobe_handler(unsigned long addr, struct pt_regs *regs)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@@ -317,22 +318,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned long trapnr)
 		 * caused the fault.
 		 */
 
-		/* We increment the nmissed count for accounting,
-		 * we can also use npre/npostfault count for accounting
-		 * these specific fault cases.
-		 */
-		kprobes_inc_nmissed_count(cur);
-
-		/*
-		 * We come here because instructions in the pre/post
-		 * handler caused the page_fault, this could happen
-		 * if handler tries to access user space by
-		 * copy_from_user(), get_user() etc. Let the
-		 * user-specified handler try to fix it first.
-		 */
-		if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
-			return 1;
-
 		/*
 		 * In case the user-specified fault handler returned zero,
 		 * try to fix up.
@@ -379,8 +364,9 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 
 static void __used kretprobe_trampoline_holder(void)
 {
-	__asm__ __volatile__(".global kretprobe_trampoline\n"
-			     "kretprobe_trampoline:\n" "nop\n");
+	__asm__ __volatile__(".global __kretprobe_trampoline\n"
+			     "__kretprobe_trampoline:\n"
+			     "nop\n");
 }
 
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
@@ -388,66 +374,16 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 {
 
 	ri->ret_addr = (kprobe_opcode_t *) regs->blink;
+	ri->fp = NULL;
 
 	/* Replace the return addr with trampoline addr */
-	regs->blink = (unsigned long)&kretprobe_trampoline;
+	regs->blink = (unsigned long)&__kretprobe_trampoline;
 }
 
 static int __kprobes trampoline_probe_handler(struct kprobe *p,
 					      struct pt_regs *regs)
 {
-	struct kretprobe_instance *ri = NULL;
-	struct hlist_head *head, empty_rp;
-	struct hlist_node *tmp;
-	unsigned long flags, orig_ret_address = 0;
-	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
-
-	INIT_HLIST_HEAD(&empty_rp);
-	kretprobe_hash_lock(current, &head, &flags);
-
-	/*
-	 * It is possible to have multiple instances associated with a given
-	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more than one return
-	 * return probe was registered for a target function.
-	 *
-	 * We can handle this because:
-	 *     - instances are always inserted at the head of the list
-	 *     - when multiple return probes are registered for the same
-	 *       function, the first instance's ret_addr will point to the
-	 *       real return address, and all the rest will point to
-	 *       kretprobe_trampoline
-	 */
-	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
-		if (ri->task != current)
-			/* another task is sharing our hash bucket */
-			continue;
-
-		if (ri->rp && ri->rp->handler)
-			ri->rp->handler(ri, regs);
-
-		orig_ret_address = (unsigned long)ri->ret_addr;
-		recycle_rp_inst(ri, &empty_rp);
-
-		if (orig_ret_address != trampoline_address) {
-			/*
-			 * This is the real return address. Any other
-			 * instances associated with this task are for
-			 * other calls deeper on the call stack
-			 */
-			break;
-		}
-	}
-
-	kretprobe_assert(ri, orig_ret_address, trampoline_address);
-	regs->ret = orig_ret_address;
-
-	kretprobe_hash_unlock(current, &flags);
-
-	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
-		hlist_del(&ri->hlist);
-		kfree(ri);
-	}
+	regs->ret = __kretprobe_trampoline_handler(regs, NULL);
 
 	/* By returning a non zero value, we are telling the kprobe handler
 	 * that we don't want the post_handler to run
@@ -456,7 +392,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 }
 
 static struct kprobe trampoline_p = {
-	.addr = (kprobe_opcode_t *) &kretprobe_trampoline,
+	.addr = (kprobe_opcode_t *) &__kretprobe_trampoline,
 	.pre_handler = trampoline_probe_handler
 };
 
@@ -468,7 +404,7 @@ int __init arch_init_kprobes(void)
 
 int __kprobes arch_trampoline_kprobe(struct kprobe *p)
 {
-	if (p->addr == (kprobe_opcode_t *) &kretprobe_trampoline)
+	if (p->addr == (kprobe_opcode_t *) &__kretprobe_trampoline)
 		return 1;
 
 	return 0;
diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index abf9398cc333..02b28a9324f4 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -165,8 +165,6 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.idu, "IDU "),
 		IS_AVAIL1(mp.dbg, "DEBUG "),
 		IS_AVAIL1(mp.gfrc, "GFRC"));
-
-	cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
 }
 
 struct plat_smp_ops plat_smp_ops = {
@@ -352,15 +350,13 @@ static void idu_cascade_isr(struct irq_desc *desc)
 	irq_hw_number_t idu_hwirq = core_hwirq - FIRST_EXT_IRQ;
 
 	chained_irq_enter(core_chip, desc);
-	generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
+	generic_handle_domain_irq(idu_domain, idu_hwirq);
 	chained_irq_exit(core_chip, desc);
 }
 
 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
 {
 	irq_set_chip_and_handler(virq, &idu_irq_chip, handle_level_irq);
-	irq_set_status_flags(virq, IRQ_MOVE_PCNTXT);
-
 	return 0;
 }
 
@@ -395,7 +391,8 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 
 	pr_info("MCIP: IDU supports %u common irqs\n", nr_irqs);
 
-	domain = irq_domain_add_linear(intc, nr_irqs, &idu_irq_ops, NULL);
+	domain = irq_domain_create_linear(of_fwnode_handle(intc), nr_irqs,
+					  &idu_irq_ops, NULL);
 
 	/* Parent interrupts (core-intc) are already mapped */
 
diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
index 861a8aea51f9..ed6d4f0cd621 100644
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@@ -17,6 +17,168 @@
 /* HW holds 8 symbols + one for null terminator */
 #define ARCPMU_EVENT_NAME_LEN	9
 
+/*
+ * Some ARC pct quirks:
+ *
+ * PERF_COUNT_HW_STALLED_CYCLES_BACKEND
+ * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
+ *	The ARC 700 can either measure stalls per pipeline stage, or all stalls
+ *	combined; for now we assign all stalls to STALLED_CYCLES_BACKEND
+ *	and all pipeline flushes (e.g. caused by mispredicts, etc.) to
+ *	STALLED_CYCLES_FRONTEND.
+ *
+ *	We could start multiple performance counters and combine everything
+ *	afterwards, but that makes it complicated.
+ *
+ *	Note that I$ cache misses aren't counted by either of the two!
+ */
+
+/*
+ * ARC PCT has hardware conditions with fixed "names" but variable "indexes"
+ * (based on a specific RTL build)
+ * Below is the static map between perf generic/arc specific event_id and
+ * h/w condition names.
+ * At the time of probe, we loop thru each index and find its name to
+ * complete the mapping of perf event_id to h/w index as latter is needed
+ * to program the counter really
+ */
+static const char * const arc_pmu_ev_hw_map[] = {
+	/* count cycles */
+	[PERF_COUNT_HW_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_REF_CPU_CYCLES] = "crun",
+	[PERF_COUNT_HW_BUS_CYCLES] = "crun",
+
+	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush",
+	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall",
+
+	/* counts condition */
+	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
+	/* All jump instructions that are taken */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
+#ifdef CONFIG_ISA_ARCV2
+	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
+#else
+	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
+	[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
+#endif
+	[PERF_COUNT_ARC_LDC] = "imemrdc",	/* Instr: mem read cached */
+	[PERF_COUNT_ARC_STC] = "imemwrc",	/* Instr: mem write cached */
+
+	[PERF_COUNT_ARC_DCLM] = "dclm",		/* D-cache Load Miss */
+	[PERF_COUNT_ARC_DCSM] = "dcsm",		/* D-cache Store Miss */
+	[PERF_COUNT_ARC_ICM] = "icm",		/* I-cache Miss */
+	[PERF_COUNT_ARC_EDTLB] = "edtlb",	/* D-TLB Miss */
+	[PERF_COUNT_ARC_EITLB] = "eitlb",	/* I-TLB Miss */
+
+	[PERF_COUNT_HW_CACHE_REFERENCES] = "imemrdc",	/* Instr: mem read cached */
+	[PERF_COUNT_HW_CACHE_MISSES] = "dclm",		/* D-cache Load Miss */
+};
+
+#define C(_x)			PERF_COUNT_HW_CACHE_##_x
+#define CACHE_OP_UNSUPPORTED	0xffff
+
+static const unsigned int arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCLM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_STC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_DCSM,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_HW_INSTRUCTIONS,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_ICM,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EDTLB,
+		},
+			/* DTLB LD/ST Miss not segregated by h/w*/
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= PERF_COUNT_ARC_EITLB,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
+			[C(RESULT_MISS)]	= PERF_COUNT_HW_BRANCH_MISSES,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
 enum arc_pmu_attr_groups {
 	ARCPMU_ATTR_GR_EVENTS,
 	ARCPMU_ATTR_GR_FORMATS,
@@ -328,7 +490,7 @@ static void arc_pmu_stop(struct perf_event *event, int flags)
 	}
 
 	if (!(event->hw.state & PERF_HES_STOPPED)) {
-		/* stop ARC pmu here */
+		/* stop hw counter here */
 		write_aux_reg(ARC_REG_PCT_INDEX, idx);
 
 		/* condition code #0 is always "never" */
@@ -361,7 +523,7 @@ static int arc_pmu_add(struct perf_event *event, int flags)
 {
 	struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
 	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
+	int idx;
 
 	idx = ffz(pmu_cpu->used_mask[0]);
 	if (idx == arc_pmu->n_counters)
@@ -437,10 +599,8 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 
 		arc_perf_event_update(event, &event->hw, event->hw.idx);
 		perf_sample_data_init(&data, 0, hwc->last_period);
-		if (arc_pmu_event_set_period(event)) {
-			if (perf_event_overflow(event, &data, regs))
-				arc_pmu_stop(event, 0);
-		}
+		if (arc_pmu_event_set_period(event))
+			perf_event_overflow(event, &data, regs);
 
 		active_ints &= ~BIT(idx);
 	} while (active_ints);
@@ -562,7 +722,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 {
 	struct arc_reg_pct_build pct_bcr;
 	struct arc_reg_cc_build cc_bcr;
-	int i, has_interrupts;
+	int i, has_interrupts, irq = -1;
 	int counter_size;	/* in bits */
 
 	union cc_name {
@@ -614,8 +774,8 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 	/* loop thru all available h/w condition indexes */
 	for (i = 0; i < cc_bcr.c; i++) {
 		write_aux_reg(ARC_REG_CC_INDEX, i);
-		cc_name.indiv.word0 = read_aux_reg(ARC_REG_CC_NAME0);
-		cc_name.indiv.word1 = read_aux_reg(ARC_REG_CC_NAME1);
+		cc_name.indiv.word0 = le32_to_cpu(read_aux_reg(ARC_REG_CC_NAME0));
+		cc_name.indiv.word1 = le32_to_cpu(read_aux_reg(ARC_REG_CC_NAME1));
 
 		arc_pmu_map_hw_event(i, cc_name.str);
 		arc_pmu_add_raw_event_attr(i, cc_name.str);
@@ -638,22 +798,25 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 	};
 
 	if (has_interrupts) {
-		int irq = platform_get_irq(pdev, 0);
+		irq = platform_get_irq(pdev, 0);
+		if (irq >= 0) {
+			int ret;
 
-		if (irq < 0) {
-			pr_err("Cannot get IRQ number for the platform\n");
-			return -ENODEV;
-		}
+			arc_pmu->irq = irq;
 
-		arc_pmu->irq = irq;
+			/* intc map function ensures irq_set_percpu_devid() called */
+			ret = request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
+						 this_cpu_ptr(&arc_pmu_cpu));
 
-		/* intc map function ensures irq_set_percpu_devid() called */
-		request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
-				   this_cpu_ptr(&arc_pmu_cpu));
+			if (!ret)
+				on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
+			else
+				irq = -1;
+		}
 
-		on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
+	}
 
-	} else
+	if (irq == -1)
 		arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
 
 	/*
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index e1889ce3faf9..8166d0908713 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -20,6 +20,8 @@
 #include <linux/elf.h>
 #include <linux/tick.h>
 
+#include <asm/fpu.h>
+
 SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr)
 {
 	task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr;
@@ -41,21 +43,21 @@ SYSCALL_DEFINE0(arc_gettls)
 	return task_thread_info(current)->thr_ptr;
 }
 
-SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
 {
 	struct pt_regs *regs = current_pt_regs();
 	u32 uval;
 	int ret;
 
 	/*
-	 * This is only for old cores lacking LLOCK/SCOND, which by defintion
+	 * This is only for old cores lacking LLOCK/SCOND, which by definition
 	 * can't possibly be SMP. Thus doesn't need to be SMP safe.
 	 * And this also helps reduce the overhead for serializing in
 	 * the UP case
 	 */
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
 
-	/* Z indicates to userspace if operation succeded */
+	/* Z indicates to userspace if operation succeeded */
 	regs->status32 &= ~STATUS_Z_MASK;
 
 	ret = access_ok(uaddr, sizeof(*uaddr));
@@ -88,10 +90,10 @@ fault:
 	if (unlikely(ret != -EFAULT))
 		 goto fail;
 
-	down_read(&current->mm->mmap_sem);
-	ret = fixup_user_fault(current, current->mm, (unsigned long) uaddr,
+	mmap_read_lock(current->mm);
+	ret = fixup_user_fault(current->mm, (unsigned long) uaddr,
 			       FAULT_FLAG_WRITE, NULL);
-	up_read(&current->mm->mmap_sem);
+	mmap_read_unlock(current->mm);
 
 	if (likely(!ret))
 		 goto again;
@@ -105,32 +107,24 @@ fail:
 
 void arch_cpu_idle(void)
 {
-	/* Re-enable interrupts <= default irq priority before commiting SLEEP */
+	/* Re-enable interrupts <= default irq priority before committing SLEEP */
 	const unsigned int arg = 0x10 | ARCV2_IRQ_DEF_PRIO;
 
 	__asm__ __volatile__(
 		"sleep %0	\n"
 		:
 		:"I"(arg)); /* can't be "r" has to be embedded const */
-}
 
-#elif defined(CONFIG_EZNPS_MTM_EXT)	/* ARC700 variant in NPS */
-
-void arch_cpu_idle(void)
-{
-	/* only the calling HW thread needs to sleep */
-	__asm__ __volatile__(
-		".word %0	\n"
-		:
-		:"i"(CTOP_INST_HWSCHD_WFT_IE12));
+	raw_local_irq_disable();
 }
 
 #else	/* ARC700 */
 
 void arch_cpu_idle(void)
 {
-	/* sleep, but enable both set E1/E2 (levels of interrutps) before committing */
+	/* sleep, but enable both set E1/E2 (levels of interrupts) before committing */
 	__asm__ __volatile__("sleep 0x3	\n");
+	raw_local_irq_disable();
 }
 
 #endif
@@ -147,7 +141,7 @@ asmlinkage void ret_from_fork(void);
  * |    unused      |
  * |                |
  * ------------------
- * |     r25        |   <==== top of Stack (thread.ksp)
+ * |     r25        |   <==== top of Stack (thread_info.ksp)
  * ~                ~
  * |    --to--      |   (CALLEE Regs of kernel mode)
  * |     r13        |
@@ -168,13 +162,13 @@ asmlinkage void ret_from_fork(void);
  * |      SP        |
  * |    orig_r0     |
  * |    event/ECR   |
- * |    user_r25    |
  * ------------------  <===== END of PAGE
  */
-int copy_thread(unsigned long clone_flags,
-		unsigned long usp, unsigned long kthread_arg,
-		struct task_struct *p)
+int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
+	u64 clone_flags = args->flags;
+	unsigned long usp = args->stack;
+	unsigned long tls = args->tls;
 	struct pt_regs *c_regs;        /* child's pt_regs */
 	unsigned long *childksp;       /* to unwind out of __switch_to() */
 	struct callee_regs *c_callee;  /* child's callee regs */
@@ -187,24 +181,24 @@ int copy_thread(unsigned long clone_flags,
 	c_callee = ((struct callee_regs *)childksp) - 1;
 
 	/*
-	 * __switch_to() uses thread.ksp to start unwinding stack
+	 * __switch_to() uses thread_info.ksp to start unwinding stack
 	 * For kernel threads we don't need to create callee regs, the
 	 * stack layout nevertheless needs to remain the same.
 	 * Also, since __switch_to anyways unwinds callee regs, we use
 	 * this to populate kernel thread entry-pt/args into callee regs,
 	 * so that ret_from_kernel_thread() becomes simpler.
 	 */
-	p->thread.ksp = (unsigned long)c_callee;	/* THREAD_KSP */
+	task_thread_info(p)->ksp = (unsigned long)c_callee;	/* THREAD_INFO_KSP */
 
 	/* __switch_to expects FP(0), BLINK(return addr) at top */
 	childksp[0] = 0;			/* fp */
 	childksp[1] = (unsigned long)ret_from_fork; /* blink */
 
-	if (unlikely(p->flags & PF_KTHREAD)) {
+	if (unlikely(args->fn)) {
 		memset(c_regs, 0, sizeof(struct pt_regs));
 
-		c_callee->r13 = kthread_arg;
-		c_callee->r14 = usp;  /* function */
+		c_callee->r13 = (unsigned long)args->fn_arg;
+		c_callee->r14 = (unsigned long)args->fn;
 
 		return 0;
 	}
@@ -231,7 +225,7 @@ int copy_thread(unsigned long clone_flags,
 		 * set task's userland tls data ptr from 4th arg
 		 * clone C-lib call is difft from clone sys-call
 		 */
-		task_thread_info(p)->thr_ptr = regs->r3;
+		task_thread_info(p)->thr_ptr = tls;
 	} else {
 		/* Normal fork case: set parent's TLS ptr in child */
 		task_thread_info(p)->thr_ptr =
@@ -248,23 +242,13 @@ int copy_thread(unsigned long clone_flags,
 	 */
 	c_callee->r25 = task_thread_info(p)->thr_ptr;
 
-#ifdef CONFIG_ARC_CURR_IN_REG
-	/*
-	 * setup usermode thread pointer #2:
-	 * however for this special use of r25 in kernel, __switch_to() sets
-	 * r25 for kernel needs and only in the final return path is usermode
-	 * r25 setup, from pt_regs->user_r25. So set that up as well
-	 */
-	c_regs->user_r25 = c_callee->r25;
-#endif
-
 	return 0;
 }
 
 /*
  * Do necessary setup to start up a new user task
  */
-void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp)
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
 {
 	regs->sp = usp;
 	regs->ret = pc;
@@ -276,9 +260,7 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp)
 	 */
 	regs->status32 = STATUS_U_MASK | STATUS_L_MASK | ISA_INIT_STATUS_BITS;
 
-#ifdef CONFIG_EZNPS_MTM_EXT
-	regs->eflags = 0;
-#endif
+	fpu_init_task(regs);
 
 	/* bogus seed values for debugging */
 	regs->lp_start = 0x10;
@@ -292,11 +274,6 @@ void flush_thread(void)
 {
 }
 
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
-{
-	return 0;
-}
-
 int elf_check_arch(const struct elf32_hdr *x)
 {
 	unsigned int eflags;
@@ -310,7 +287,7 @@ int elf_check_arch(const struct elf32_hdr *x)
 	eflags = x->e_flags;
 	if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
 		pr_err("ABI mismatch - you need newer toolchain\n");
-		force_sigsegv(SIGSEGV);
+		force_fatal_sig(SIGSEGV);
 		return 0;
 	}
 
diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c
index d5f3fcf273b5..cad5367b7c37 100644
--- a/arch/arc/kernel/ptrace.c
+++ b/arch/arc/kernel/ptrace.c
@@ -4,12 +4,95 @@
  */
 
 #include <linux/ptrace.h>
-#include <linux/tracehook.h>
 #include <linux/sched/task_stack.h>
 #include <linux/regset.h>
 #include <linux/unistd.h>
 #include <linux/elf.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+#ifdef CONFIG_ISA_ARCOMPACT
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(bta),
+	REG_OFFSET_NAME(lp_start),
+	REG_OFFSET_NAME(lp_end),
+	REG_OFFSET_NAME(lp_count),
+	REG_OFFSET_NAME(status32),
+	REG_OFFSET_NAME(ret),
+	REG_OFFSET_NAME(blink),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(r26),
+	REG_OFFSET_NAME(r12),
+	REG_OFFSET_NAME(r11),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(orig_r0),
+	REG_OFFSET_NAME(ecr),
+	REG_OFFSET_END,
+};
+
+#else
+
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(orig_r0),
+	REG_OFFSET_NAME(ecr),
+	REG_OFFSET_NAME(bta),
+	REG_OFFSET_NAME(r26),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(r12),
+	REG_OFFSET_NAME(r30),
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	REG_OFFSET_NAME(r58),
+	REG_OFFSET_NAME(r59),
+#endif
+#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS
+	REG_OFFSET_NAME(DSP_CTRL),
+#endif
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(r11),
+	REG_OFFSET_NAME(blink),
+	REG_OFFSET_NAME(lp_end),
+	REG_OFFSET_NAME(lp_start),
+	REG_OFFSET_NAME(lp_count),
+	REG_OFFSET_NAME(ei),
+	REG_OFFSET_NAME(ldi),
+	REG_OFFSET_NAME(jli),
+	REG_OFFSET_NAME(ret),
+	REG_OFFSET_NAME(status32),
+	REG_OFFSET_END,
+};
+#endif
+
 static struct callee_regs *task_callee_regs(struct task_struct *tsk)
 {
 	struct callee_regs *tmp = (struct callee_regs *)tsk->thread.callee_reg;
@@ -18,88 +101,61 @@ static struct callee_regs *task_callee_regs(struct task_struct *tsk)
 
 static int genregs_get(struct task_struct *target,
 		       const struct user_regset *regset,
-		       unsigned int pos, unsigned int count,
-		       void *kbuf, void __user *ubuf)
+		       struct membuf to)
 {
 	const struct pt_regs *ptregs = task_pt_regs(target);
 	const struct callee_regs *cregs = task_callee_regs(target);
-	int ret = 0;
 	unsigned int stop_pc_val;
 
-#define REG_O_CHUNK(START, END, PTR)	\
-	if (!ret)	\
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, PTR, \
-			offsetof(struct user_regs_struct, START), \
-			offsetof(struct user_regs_struct, END));
-
-#define REG_O_ONE(LOC, PTR)	\
-	if (!ret)		\
-		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, PTR, \
-			offsetof(struct user_regs_struct, LOC), \
-			offsetof(struct user_regs_struct, LOC) + 4);
-
-#define REG_O_ZERO(LOC)		\
-	if (!ret)		\
-		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, \
-			offsetof(struct user_regs_struct, LOC), \
-			offsetof(struct user_regs_struct, LOC) + 4);
-
-	REG_O_ZERO(pad);
-	REG_O_ONE(scratch.bta, &ptregs->bta);
-	REG_O_ONE(scratch.lp_start, &ptregs->lp_start);
-	REG_O_ONE(scratch.lp_end, &ptregs->lp_end);
-	REG_O_ONE(scratch.lp_count, &ptregs->lp_count);
-	REG_O_ONE(scratch.status32, &ptregs->status32);
-	REG_O_ONE(scratch.ret, &ptregs->ret);
-	REG_O_ONE(scratch.blink, &ptregs->blink);
-	REG_O_ONE(scratch.fp, &ptregs->fp);
-	REG_O_ONE(scratch.gp, &ptregs->r26);
-	REG_O_ONE(scratch.r12, &ptregs->r12);
-	REG_O_ONE(scratch.r11, &ptregs->r11);
-	REG_O_ONE(scratch.r10, &ptregs->r10);
-	REG_O_ONE(scratch.r9, &ptregs->r9);
-	REG_O_ONE(scratch.r8, &ptregs->r8);
-	REG_O_ONE(scratch.r7, &ptregs->r7);
-	REG_O_ONE(scratch.r6, &ptregs->r6);
-	REG_O_ONE(scratch.r5, &ptregs->r5);
-	REG_O_ONE(scratch.r4, &ptregs->r4);
-	REG_O_ONE(scratch.r3, &ptregs->r3);
-	REG_O_ONE(scratch.r2, &ptregs->r2);
-	REG_O_ONE(scratch.r1, &ptregs->r1);
-	REG_O_ONE(scratch.r0, &ptregs->r0);
-	REG_O_ONE(scratch.sp, &ptregs->sp);
-
-	REG_O_ZERO(pad2);
-
-	REG_O_ONE(callee.r25, &cregs->r25);
-	REG_O_ONE(callee.r24, &cregs->r24);
-	REG_O_ONE(callee.r23, &cregs->r23);
-	REG_O_ONE(callee.r22, &cregs->r22);
-	REG_O_ONE(callee.r21, &cregs->r21);
-	REG_O_ONE(callee.r20, &cregs->r20);
-	REG_O_ONE(callee.r19, &cregs->r19);
-	REG_O_ONE(callee.r18, &cregs->r18);
-	REG_O_ONE(callee.r17, &cregs->r17);
-	REG_O_ONE(callee.r16, &cregs->r16);
-	REG_O_ONE(callee.r15, &cregs->r15);
-	REG_O_ONE(callee.r14, &cregs->r14);
-	REG_O_ONE(callee.r13, &cregs->r13);
-
-	REG_O_ONE(efa, &target->thread.fault_address);
-
-	if (!ret) {
-		if (in_brkpt_trap(ptregs)) {
-			stop_pc_val = target->thread.fault_address;
-			pr_debug("\t\tstop_pc (brk-pt)\n");
-		} else {
-			stop_pc_val = ptregs->ret;
-			pr_debug("\t\tstop_pc (others)\n");
-		}
-
-		REG_O_ONE(stop_pc, &stop_pc_val);
+	membuf_zero(&to, 4);	// pad
+	membuf_store(&to, ptregs->bta);
+	membuf_store(&to, ptregs->lp_start);
+	membuf_store(&to, ptregs->lp_end);
+	membuf_store(&to, ptregs->lp_count);
+	membuf_store(&to, ptregs->status32);
+	membuf_store(&to, ptregs->ret);
+	membuf_store(&to, ptregs->blink);
+	membuf_store(&to, ptregs->fp);
+	membuf_store(&to, ptregs->r26);	// gp
+	membuf_store(&to, ptregs->r12);
+	membuf_store(&to, ptregs->r11);
+	membuf_store(&to, ptregs->r10);
+	membuf_store(&to, ptregs->r9);
+	membuf_store(&to, ptregs->r8);
+	membuf_store(&to, ptregs->r7);
+	membuf_store(&to, ptregs->r6);
+	membuf_store(&to, ptregs->r5);
+	membuf_store(&to, ptregs->r4);
+	membuf_store(&to, ptregs->r3);
+	membuf_store(&to, ptregs->r2);
+	membuf_store(&to, ptregs->r1);
+	membuf_store(&to, ptregs->r0);
+	membuf_store(&to, ptregs->sp);
+	membuf_zero(&to, 4);	// pad2
+	membuf_store(&to, cregs->r25);
+	membuf_store(&to, cregs->r24);
+	membuf_store(&to, cregs->r23);
+	membuf_store(&to, cregs->r22);
+	membuf_store(&to, cregs->r21);
+	membuf_store(&to, cregs->r20);
+	membuf_store(&to, cregs->r19);
+	membuf_store(&to, cregs->r18);
+	membuf_store(&to, cregs->r17);
+	membuf_store(&to, cregs->r16);
+	membuf_store(&to, cregs->r15);
+	membuf_store(&to, cregs->r14);
+	membuf_store(&to, cregs->r13);
+	membuf_store(&to, target->thread.fault_address); // efa
+
+	if (in_brkpt_trap(ptregs)) {
+		stop_pc_val = target->thread.fault_address;
+		pr_debug("\t\tstop_pc (brk-pt)\n");
+	} else {
+		stop_pc_val = ptregs->ret;
+		pr_debug("\t\tstop_pc (others)\n");
 	}
 
-	return ret;
+	return membuf_store(&to, stop_pc_val); // stop_pc
 }
 
 static int genregs_set(struct task_struct *target,
@@ -127,7 +183,7 @@ static int genregs_set(struct task_struct *target,
 
 #define REG_IGNORE_ONE(LOC)		\
 	if (!ret)			\
-		ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, \
+		user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, \
 			offsetof(struct user_regs_struct, LOC), \
 			offsetof(struct user_regs_struct, LOC) + 4);
 
@@ -184,25 +240,20 @@ static int genregs_set(struct task_struct *target,
 #ifdef CONFIG_ISA_ARCV2
 static int arcv2regs_get(struct task_struct *target,
 		       const struct user_regset *regset,
-		       unsigned int pos, unsigned int count,
-		       void *kbuf, void __user *ubuf)
+		       struct membuf to)
 {
 	const struct pt_regs *regs = task_pt_regs(target);
-	int ret, copy_sz;
 
 	if (IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS))
-		copy_sz = sizeof(struct user_regs_arcv2);
-	else
-		copy_sz = 4;	/* r30 only */
+		/*
+		 * itemized copy not needed like above as layout of regs (r30,r58,r59)
+		 * is exactly same in kernel (pt_regs) and userspace (user_regs_arcv2)
+		 */
+		return membuf_write(&to, &regs->r30, sizeof(struct user_regs_arcv2));
 
-	/*
-	 * itemized copy not needed like above as layout of regs (r30,r58,r59)
-	 * is exactly same in kernel (pt_regs) and userspace (user_regs_arcv2)
-	 */
-	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, &regs->r30,
-				  0, copy_sz);
 
-	return ret;
+	membuf_write(&to, &regs->r30, 4); /* r30 only */
+	return membuf_zero(&to, sizeof(struct user_regs_arcv2) - 4);
 }
 
 static int arcv2regs_set(struct task_struct *target,
@@ -233,27 +284,27 @@ enum arc_getset {
 
 static const struct user_regset arc_regsets[] = {
 	[REGSET_CMN] = {
-	       .core_note_type = NT_PRSTATUS,
+	       USER_REGSET_NOTE_TYPE(PRSTATUS),
 	       .n = ELF_NGREG,
 	       .size = sizeof(unsigned long),
 	       .align = sizeof(unsigned long),
-	       .get = genregs_get,
+	       .regset_get = genregs_get,
 	       .set = genregs_set,
 	},
 #ifdef CONFIG_ISA_ARCV2
 	[REGSET_ARCV2] = {
-	       .core_note_type = NT_ARC_V2,
+	       USER_REGSET_NOTE_TYPE(ARC_V2),
 	       .n = ELF_ARCV2REG,
 	       .size = sizeof(unsigned long),
 	       .align = sizeof(unsigned long),
-	       .get = arcv2regs_get,
+	       .regset_get = arcv2regs_get,
 	       .set = arcv2regs_set,
 	},
 #endif
 };
 
 static const struct user_regset_view user_arc_view = {
-	.name		= UTS_MACHINE,
+	.name		= "arc",
 	.e_machine	= EM_ARC_INUSE,
 	.regsets	= arc_regsets,
 	.n		= ARRAY_SIZE(arc_regsets)
@@ -288,15 +339,63 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
-asmlinkage int syscall_trace_entry(struct pt_regs *regs)
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 {
-	if (tracehook_report_syscall_entry(regs))
-		return ULONG_MAX;
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		if (ptrace_report_syscall_entry(regs))
+			return ULONG_MAX;
+
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_enter(regs, syscall_get_nr(current, regs));
+#endif
 
 	return regs->r8;
 }
 
 asmlinkage void syscall_trace_exit(struct pt_regs *regs)
 {
-	tracehook_report_syscall_exit(regs, 0);
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		ptrace_report_syscall_exit(regs, 0);
+
+#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
+	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+		trace_sys_exit(regs, regs_return_value(regs));
+#endif
+}
+
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return (addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1));
+}
+
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
 }
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 7ee89dc61f6e..7b6a9beba9db 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -8,17 +8,19 @@
 #include <linux/delay.h>
 #include <linux/root_dev.h>
 #include <linux/clk.h>
-#include <linux/clk-provider.h>
 #include <linux/clocksource.h>
 #include <linux/console.h>
 #include <linux/module.h>
+#include <linux/sizes.h>
 #include <linux/cpu.h>
+#include <linux/of_clk.h>
 #include <linux/of_fdt.h>
 #include <linux/of.h>
 #include <linux/cache.h>
 #include <uapi/linux/mount.h>
 #include <asm/sections.h>
 #include <asm/arcregs.h>
+#include <asm/asserts.h>
 #include <asm/tlb.h>
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -26,6 +28,8 @@
 #include <asm/unwind.h>
 #include <asm/mach_desc.h>
 #include <asm/smp.h>
+#include <asm/dsp-impl.h>
+#include <soc/arc/mcip.h>
 
 #define FIX_PTR(x)  __asm__ __volatile__(";" : "+r"(x))
 
@@ -40,408 +44,365 @@ const struct machine_desc *machine_desc;
 
 struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
-struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
+struct cpuinfo_arc {
+	int arcver;
+	unsigned int t0:1, t1:1;
+	struct {
+		unsigned long base;
+		unsigned int sz;
+	} iccm, dccm;
+};
+
+#ifdef CONFIG_ISA_ARCV2
 
-static const struct id_to_str arc_legacy_rel[] = {
+static const struct id_to_str arc_hs_rel[] = {
 	/* ID.ARCVER,	Release */
-#ifdef CONFIG_ISA_ARCOMPACT
-	{ 0x34, 	"R4.10"},
-	{ 0x35, 	"R4.11"},
-#else
 	{ 0x51, 	"R2.0" },
 	{ 0x52, 	"R2.1" },
 	{ 0x53,		"R3.0" },
-#endif
-	{ 0x00,		NULL   }
 };
 
-static const struct id_to_str arc_cpu_rel[] = {
+static const struct id_to_str arc_hs_ver54_rel[] = {
 	/* UARCH.MAJOR,	Release */
 	{  0,		"R3.10a"},
 	{  1,		"R3.50a"},
+	{  2,		"R3.60a"},
+	{  3,		"R4.00a"},
 	{  0xFF,	NULL   }
 };
+#endif
 
-static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
+static int
+arcompact_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
 {
-	if (is_isa_arcompact()) {
-		struct bcr_iccm_arcompact iccm;
-		struct bcr_dccm_arcompact dccm;
-
-		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
-		if (iccm.ver) {
-			cpu->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */
-			cpu->iccm.base_addr = iccm.base << 16;
-		}
-
-		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
-		if (dccm.ver) {
-			unsigned long base;
-			cpu->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */
-
-			base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
-			cpu->dccm.base_addr = base & ~0xF;
-		}
-	} else {
-		struct bcr_iccm_arcv2 iccm;
-		struct bcr_dccm_arcv2 dccm;
-		unsigned long region;
-
-		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
-		if (iccm.ver) {
-			cpu->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */
-			if (iccm.sz00 == 0xF && iccm.sz01 > 0)
-				cpu->iccm.sz <<= iccm.sz01;
-
-			region = read_aux_reg(ARC_REG_AUX_ICCM);
-			cpu->iccm.base_addr = region & 0xF0000000;
-		}
+	int n = 0;
+#ifdef CONFIG_ISA_ARCOMPACT
+	char *cpu_nm, *isa_nm = "ARCompact";
+	struct bcr_fp_arcompact fpu_sp, fpu_dp;
+	int atomic = 0, be, present;
+	int bpu_full, bpu_cache, bpu_pred;
+	struct bcr_bpu_arcompact bpu;
+	struct bcr_iccm_arcompact iccm;
+	struct bcr_dccm_arcompact dccm;
+	struct bcr_generic isa;
 
-		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
-		if (dccm.ver) {
-			cpu->dccm.sz = 256 << dccm.sz0;
-			if (dccm.sz0 == 0xF && dccm.sz1 > 0)
-				cpu->dccm.sz <<= dccm.sz1;
+	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
 
-			region = read_aux_reg(ARC_REG_AUX_DCCM);
-			cpu->dccm.base_addr = region & 0xF0000000;
-		}
+	if (!isa.ver)	/* ISA BCR absent, use Kconfig info */
+		atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
+	else {
+		/* ARC700_BUILD only has 2 bits of isa info */
+		atomic = isa.info & 1;
 	}
-}
 
-static void decode_arc_core(struct cpuinfo_arc *cpu)
-{
-	struct bcr_uarch_build_arcv2 uarch;
-	const struct id_to_str *tbl;
+	be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
 
-	/*
-	 * Up until (including) the first core4 release (0x54) things were
-	 * simple: AUX IDENTITY.ARCVER was sufficient to identify arc family
-	 * and release: 0x50 to 0x53 was HS38, 0x54 was HS48 (dual issue)
-	 */
+	if (info->arcver < 0x34)
+		cpu_nm = "ARC750";
+	else
+		cpu_nm = "ARC770";
 
-	if (cpu->core.family < 0x54) { /* includes arc700 */
+	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s (%s ISA) %s%s%s\n",
+		       c, cpu_nm, isa_nm,
+		       IS_AVAIL2(atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
+		       IS_AVAIL1(be, "[Big-Endian]"));
 
-		for (tbl = &arc_legacy_rel[0]; tbl->id != 0; tbl++) {
-			if (cpu->core.family == tbl->id) {
-				cpu->release = tbl->str;
-				break;
-			}
-		}
+	READ_BCR(ARC_REG_FP_BCR, fpu_sp);
+	READ_BCR(ARC_REG_DPFP_BCR, fpu_dp);
 
-		if (is_isa_arcompact())
-			cpu->name = "ARC700";
-		else if (tbl->str)
-			cpu->name = "HS38";
-		else
-			cpu->name = cpu->release = "Unknown";
+	if (fpu_sp.ver | fpu_dp.ver)
+		n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
+			       IS_AVAIL1(fpu_sp.ver, "SP "),
+			       IS_AVAIL1(fpu_dp.ver, "DP "));
 
-		return;
-	}
+	READ_BCR(ARC_REG_BPU_BCR, bpu);
+	bpu_full = bpu.fam ? 1 : 0;
+	bpu_cache = 256 << (bpu.ent - 1);
+	bpu_pred = 256 << (bpu.ent - 1);
 
-	/*
-	 * However the subsequent HS release (same 0x54) allow HS38 or HS48
-	 * configurations and encode this info in a different BCR.
-	 * The BCR was introduced in 0x54 so can't be read unconditionally.
-	 */
-
-	READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
+	n += scnprintf(buf + n, len - n,
+			"BPU\t\t: %s%s match, cache:%d, Predict Table:%d\n",
+			IS_AVAIL1(bpu_full, "full"),
+			IS_AVAIL1(!bpu_full, "partial"),
+			bpu_cache, bpu_pred);
+
+	READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+	if (iccm.ver) {
+		info->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */
+		info->iccm.base = iccm.base << 16;
+	}
 
-	if (uarch.prod == 4) {
-		cpu->name = "HS48";
-		cpu->extn.dual = 1;
+	READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+	if (dccm.ver) {
+		unsigned long base;
+		info->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */
 
-	} else {
-		cpu->name = "HS38";
+		base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
+		info->dccm.base = base & ~0xF;
 	}
 
-	for (tbl = &arc_cpu_rel[0]; tbl->id != 0xFF; tbl++) {
-		if (uarch.maj == tbl->id) {
-			cpu->release = tbl->str;
-			break;
-		}
-	}
+	/* ARCompact ISA specific sanity checks */
+	present = fpu_dp.ver;	/* SP has no arch visible regs */
+	CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present);
+#endif
+	return n;
+
 }
 
-static void read_arc_build_cfg_regs(void)
+static int arcv2_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
 {
-	struct bcr_timer timer;
-	struct bcr_generic bcr;
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+	int n = 0;
+#ifdef CONFIG_ISA_ARCV2
+	const char *release = "", *cpu_nm = "HS38", *isa_nm = "ARCv2";
+	int dual_issue = 0, dual_enb = 0, mpy_opt, present;
+	int bpu_full, bpu_cache, bpu_pred, bpu_ret_stk;
+	char mpy_nm[16], lpb_nm[32];
 	struct bcr_isa_arcv2 isa;
-	struct bcr_actionpoint ap;
-
-	FIX_PTR(cpu);
-
-	READ_BCR(AUX_IDENTITY, cpu->core);
-	decode_arc_core(cpu);
-
-	READ_BCR(ARC_REG_TIMERS_BCR, timer);
-	cpu->extn.timer0 = timer.t0;
-	cpu->extn.timer1 = timer.t1;
-	cpu->extn.rtc = timer.rtc;
+	struct bcr_mpy mpy;
+	struct bcr_fp_arcv2 fpu;
+	struct bcr_bpu_arcv2 bpu;
+	struct bcr_lpb lpb;
+	struct bcr_iccm_arcv2 iccm;
+	struct bcr_dccm_arcv2 dccm;
+	struct bcr_erp erp;
 
-	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
-
-	READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy);
+	/*
+	 * Initial HS cores bumped AUX IDENTITY.ARCVER for each release until
+	 * ARCVER 0x54 which introduced AUX MICRO_ARCH_BUILD and subsequent
+	 * releases only update it.
+	 */
 
-	/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
-	read_decode_ccm_bcr(cpu);
+	if (info->arcver > 0x50 && info->arcver <= 0x53) {
+		release = arc_hs_rel[info->arcver - 0x51].str;
+	} else {
+		const struct id_to_str *tbl;
+		struct bcr_uarch_build uarch;
 
-	read_decode_mmu_bcr();
-	read_decode_cache_bcr();
+		READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
 
-	if (is_isa_arcompact()) {
-		struct bcr_fp_arcompact sp, dp;
-		struct bcr_bpu_arcompact bpu;
-
-		READ_BCR(ARC_REG_FP_BCR, sp);
-		READ_BCR(ARC_REG_DPFP_BCR, dp);
-		cpu->extn.fpu_sp = sp.ver ? 1 : 0;
-		cpu->extn.fpu_dp = dp.ver ? 1 : 0;
-
-		READ_BCR(ARC_REG_BPU_BCR, bpu);
-		cpu->bpu.ver = bpu.ver;
-		cpu->bpu.full = bpu.fam ? 1 : 0;
-		if (bpu.ent) {
-			cpu->bpu.num_cache = 256 << (bpu.ent - 1);
-			cpu->bpu.num_pred = 256 << (bpu.ent - 1);
+		for (tbl = &arc_hs_ver54_rel[0]; tbl->id != 0xFF; tbl++) {
+			if (uarch.maj == tbl->id) {
+				release = tbl->str;
+				break;
+			}
 		}
-	} else {
-		struct bcr_fp_arcv2 spdp;
-		struct bcr_bpu_arcv2 bpu;
-
-		READ_BCR(ARC_REG_FP_V2_BCR, spdp);
-		cpu->extn.fpu_sp = spdp.sp ? 1 : 0;
-		cpu->extn.fpu_dp = spdp.dp ? 1 : 0;
-
-		READ_BCR(ARC_REG_BPU_BCR, bpu);
-		cpu->bpu.ver = bpu.ver;
-		cpu->bpu.full = bpu.ft;
-		cpu->bpu.num_cache = 256 << bpu.bce;
-		cpu->bpu.num_pred = 2048 << bpu.pte;
-		cpu->bpu.ret_stk = 4 << bpu.rse;
-
-		/* if dual issue hardware, is it enabled ? */
-		if (cpu->extn.dual) {
+		if (uarch.prod == 4) {
 			unsigned int exec_ctrl;
 
+			cpu_nm = "HS48";
+			dual_issue = 1;
+			/* if dual issue hardware, is it enabled ? */
 			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
-			cpu->extn.dual_enb = !(exec_ctrl & 1);
+			dual_enb = !(exec_ctrl & 1);
 		}
 	}
 
-	READ_BCR(ARC_REG_AP_BCR, ap);
-	if (ap.ver) {
-		cpu->extn.ap_num = 2 << ap.num;
-		cpu->extn.ap_full = !ap.min;
-	}
-
-	READ_BCR(ARC_REG_SMART_BCR, bcr);
-	cpu->extn.smart = bcr.ver ? 1 : 0;
-
-	READ_BCR(ARC_REG_RTT_BCR, bcr);
-	cpu->extn.rtt = bcr.ver ? 1 : 0;
-
 	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);
 
-	/* some hacks for lack of feature BCR info in old ARC700 cores */
-	if (is_isa_arcompact()) {
-		if (!isa.ver)	/* ISA BCR absent, use Kconfig info */
-			cpu->isa.atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
-		else {
-			/* ARC700_BUILD only has 2 bits of isa info */
-			struct bcr_generic bcr = *(struct bcr_generic *)&isa;
-			cpu->isa.atomic = bcr.info & 1;
-		}
-
-		cpu->isa.be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
+	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
+		       c, cpu_nm, release, isa_nm,
+		       IS_AVAIL1(isa.be, "[Big-Endian]"),
+		       IS_AVAIL3(dual_issue, dual_enb, " Dual-Issue "));
+
+	READ_BCR(ARC_REG_MPY_BCR, mpy);
+	mpy_opt = 2;	/* stock MPY/MPYH */
+	if (mpy.dsp)	/* OPT 7-9 */
+		mpy_opt = mpy.dsp + 6;
+
+	scnprintf(mpy_nm, 16, "mpy[opt %d] ", mpy_opt);
+
+	READ_BCR(ARC_REG_FP_V2_BCR, fpu);
+
+	n += scnprintf(buf + n, len - n, "ISA Extn\t: %s%s%s%s%s%s%s%s%s%s%s\n",
+		       IS_AVAIL2(isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
+		       IS_AVAIL2(isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
+		       IS_AVAIL2(isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS),
+		       IS_AVAIL1(mpy.ver, mpy_nm),
+		       IS_AVAIL1(isa.div_rem, "div_rem "),
+		       IS_AVAIL1((fpu.sp | fpu.dp), "  FPU:"),
+		       IS_AVAIL1(fpu.sp, " sp"),
+		       IS_AVAIL1(fpu.dp, " dp"));
+
+	READ_BCR(ARC_REG_BPU_BCR, bpu);
+	bpu_full = bpu.ft;
+	bpu_cache = 256 << bpu.bce;
+	bpu_pred = 2048 << bpu.pte;
+	bpu_ret_stk = 4 << bpu.rse;
+
+	READ_BCR(ARC_REG_LPB_BUILD, lpb);
+	if (lpb.ver) {
+		unsigned int ctl;
+		ctl = read_aux_reg(ARC_REG_LPB_CTRL);
+
+		scnprintf(lpb_nm, sizeof(lpb_nm), " Loop Buffer:%d %s",
+			  lpb.entries, IS_DISABLED_RUN(!ctl));
+	}
 
-		 /* there's no direct way to distinguish 750 vs. 770 */
-		if (unlikely(cpu->core.family < 0x34 || cpu->mmu.ver < 3))
-			cpu->name = "ARC750";
-	} else {
-		cpu->isa = isa;
+	n += scnprintf(buf + n, len - n,
+			"BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d%s\n",
+			IS_AVAIL1(bpu_full, "full"),
+			IS_AVAIL1(!bpu_full, "partial"),
+			bpu_cache, bpu_pred, bpu_ret_stk,
+			lpb_nm);
+
+	READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+	if (iccm.ver) {
+		unsigned long base;
+		info->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */
+		if (iccm.sz00 == 0xF && iccm.sz01 > 0)
+			info->iccm.sz <<= iccm.sz01;
+		base = read_aux_reg(ARC_REG_AUX_ICCM);
+		info->iccm.base = base & 0xF0000000;
 	}
-}
 
-static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
-{
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
-	struct bcr_identity *core = &cpu->core;
-	char mpy_opt[16];
-	int n = 0;
+	READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+	if (dccm.ver) {
+		unsigned long base;
+		info->dccm.sz = 256 << dccm.sz0;
+		if (dccm.sz0 == 0xF && dccm.sz1 > 0)
+			info->dccm.sz <<= dccm.sz1;
+		base = read_aux_reg(ARC_REG_AUX_DCCM);
+		info->dccm.base = base & 0xF0000000;
+	}
 
-	FIX_PTR(cpu);
+	/* Error Protection: ECC/Parity */
+	READ_BCR(ARC_REG_ERP_BUILD, erp);
+	if (erp.ver) {
+		struct ctl_erp ctl;
+		READ_BCR(ARC_REG_ERP_CTRL, ctl);
+		/* inverted bits: 0 means enabled */
+		n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n",
+				IS_AVAIL3(erp.ic,  !ctl.dpi, "IC "),
+				IS_AVAIL3(erp.dc,  !ctl.dpd, "DC "),
+				IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU "));
+	}
 
-	n += scnprintf(buf + n, len - n,
-		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
-		       core->family, core->cpu_id, core->chip_id);
+	/* ARCv2 ISA specific sanity checks */
+	present = fpu.sp | fpu.dp | mpy.dsp;	/* DSP and/or FPU */
+	CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present);
 
-	n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n",
-		       cpu_id, cpu->name, cpu->release,
-		       is_isa_arcompact() ? "ARCompact" : "ARCv2",
-		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"),
-		       IS_AVAIL3(cpu->extn.dual, cpu->extn.dual_enb, " Dual-Issue "));
+	dsp_config_check();
+#endif
+	return n;
+}
 
-	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ",
-		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
-		       IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
-		       IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
-		       IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT));
+static char *arc_cpu_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len)
+{
+	struct bcr_identity ident;
+	struct bcr_timer timer;
+	struct bcr_generic bcr;
+	struct mcip_bcr mp;
+	struct bcr_actionpoint ap;
+	unsigned long vec_base;
+	int ap_num, ap_full, smart, rtt, n;
 
-	if (cpu->extn_mpy.ver) {
-		if (is_isa_arcompact()) {
-			scnprintf(mpy_opt, 16, "mpy");
-		} else {
+	memset(info, 0, sizeof(struct cpuinfo_arc));
 
-			int opt = 2;	/* stock MPY/MPYH */
+	READ_BCR(AUX_IDENTITY, ident);
+	info->arcver = ident.family;
 
-			if (cpu->extn_mpy.dsp)	/* OPT 7-9 */
-				opt = cpu->extn_mpy.dsp + 6;
+	n = scnprintf(buf, len,
+		       "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
+		       ident.family, ident.cpu_id, ident.chip_id);
 
-			scnprintf(mpy_opt, 16, "mpy[opt %d] ", opt);
-		}
+	if (is_isa_arcompact()) {
+		n += arcompact_mumbojumbo(c, info, buf + n, len - n);
+	} else if (is_isa_arcv2()){
+		n += arcv2_mumbojumbo(c, info, buf + n, len - n);
 	}
 
-	n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
-		       IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
-		       IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
-		       IS_AVAIL2(cpu->isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS),
-		       IS_AVAIL1(cpu->extn_mpy.ver, mpy_opt),
-		       IS_AVAIL1(cpu->isa.div_rem, "div_rem "));
+	n += arc_mmu_mumbojumbo(c, buf + n, len - n);
+	n += arc_cache_mumbojumbo(c, buf + n, len - n);
 
-	if (cpu->bpu.ver) {
-		n += scnprintf(buf + n, len - n,
-			      "BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d",
-			      IS_AVAIL1(cpu->bpu.full, "full"),
-			      IS_AVAIL1(!cpu->bpu.full, "partial"),
-			      cpu->bpu.num_cache, cpu->bpu.num_pred, cpu->bpu.ret_stk);
-
-		if (is_isa_arcv2()) {
-			struct bcr_lpb lpb;
-
-			READ_BCR(ARC_REG_LPB_BUILD, lpb);
-			if (lpb.ver) {
-				unsigned int ctl;
-				ctl = read_aux_reg(ARC_REG_LPB_CTRL);
-
-				n += scnprintf(buf + n, len - n, " Loop Buffer:%d %s",
-					       lpb.entries,
-					       IS_DISABLED_RUN(!ctl));
-			}
-		}
-		n += scnprintf(buf + n, len - n, "\n");
-	}
+	READ_BCR(ARC_REG_TIMERS_BCR, timer);
+	info->t0 = timer.t0;
+	info->t1 = timer.t1;
 
-	return buf;
-}
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
+	vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
 
-static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
-{
-	int n = 0;
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
+	n += scnprintf(buf + n, len - n,
+		       "Timers\t\t: %s%s%s%s%s%s\nVector Table\t: %#lx\n",
+		       IS_AVAIL1(timer.t0, "Timer0 "),
+		       IS_AVAIL1(timer.t1, "Timer1 "),
+		       IS_AVAIL2(timer.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
+		       IS_AVAIL2(mp.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
+		       vec_base);
 
-	FIX_PTR(cpu);
+	READ_BCR(ARC_REG_AP_BCR, ap);
+	if (ap.ver) {
+		ap_num = 2 << ap.num;
+		ap_full = !ap.min;
+	}
 
-	n += scnprintf(buf + n, len - n, "Vector Table\t: %#x\n", cpu->vec_base);
+	READ_BCR(ARC_REG_SMART_BCR, bcr);
+	smart = bcr.ver ? 1 : 0;
 
-	if (cpu->extn.fpu_sp || cpu->extn.fpu_dp)
-		n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
-			       IS_AVAIL1(cpu->extn.fpu_sp, "SP "),
-			       IS_AVAIL1(cpu->extn.fpu_dp, "DP "));
+	READ_BCR(ARC_REG_RTT_BCR, bcr);
+	rtt = bcr.ver ? 1 : 0;
 
-	if (cpu->extn.ap_num | cpu->extn.smart | cpu->extn.rtt) {
+	if (ap.ver | smart | rtt) {
 		n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s",
-			       IS_AVAIL1(cpu->extn.smart, "smaRT "),
-			       IS_AVAIL1(cpu->extn.rtt, "RTT "));
-		if (cpu->extn.ap_num) {
+			       IS_AVAIL1(smart, "smaRT "),
+			       IS_AVAIL1(rtt, "RTT "));
+		if (ap.ver) {
 			n += scnprintf(buf + n, len - n, "ActionPoint %d/%s",
-				       cpu->extn.ap_num,
-				       cpu->extn.ap_full ? "full":"min");
+				       ap_num,
+				       ap_full ? "full":"min");
 		}
 		n += scnprintf(buf + n, len - n, "\n");
 	}
 
-	if (cpu->dccm.sz || cpu->iccm.sz)
-		n += scnprintf(buf + n, len - n, "Extn [CCM]\t: DCCM @ %x, %d KB / ICCM: @ %x, %d KB\n",
-			       cpu->dccm.base_addr, TO_KB(cpu->dccm.sz),
-			       cpu->iccm.base_addr, TO_KB(cpu->iccm.sz));
-
-	if (is_isa_arcv2()) {
-
-		/* Error Protection: ECC/Parity */
-		struct bcr_erp erp;
-		READ_BCR(ARC_REG_ERP_BUILD, erp);
-
-		if (erp.ver) {
-			struct  ctl_erp ctl;
-			READ_BCR(ARC_REG_ERP_CTRL, ctl);
-
-			/* inverted bits: 0 means enabled */
-			n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n",
-				IS_AVAIL3(erp.ic,  !ctl.dpi, "IC "),
-				IS_AVAIL3(erp.dc,  !ctl.dpd, "DC "),
-				IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU "));
-		}
-	}
+	if (info->dccm.sz || info->iccm.sz)
+		n += scnprintf(buf + n, len - n,
+			       "Extn [CCM]\t: DCCM @ %lx, %d KB / ICCM: @ %lx, %d KB\n",
+			       info->dccm.base, TO_KB(info->dccm.sz),
+			       info->iccm.base, TO_KB(info->iccm.sz));
 
 	return buf;
 }
 
-static void arc_chk_core_config(void)
+void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena)
+{
+	if (hw_exists && !opt_ena)
+		pr_warn(" ! Enable %s for working apps\n", opt_name);
+	else if (!hw_exists && opt_ena)
+		panic("Disable %s, hardware NOT present\n", opt_name);
+}
+
+void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena)
 {
-	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
-	int saved = 0, present = 0;
-	char *opt_nm = NULL;
+	if (!hw_exists && opt_ena)
+		panic("Disable %s, hardware NOT present\n", opt_name);
+}
 
-	if (!cpu->extn.timer0)
+/*
+ * ISA agnostic sanity checks
+ */
+static void arc_chk_core_config(struct cpuinfo_arc *info)
+{
+	if (!info->t0)
 		panic("Timer0 is not present!\n");
 
-	if (!cpu->extn.timer1)
+	if (!info->t1)
 		panic("Timer1 is not present!\n");
 
 #ifdef CONFIG_ARC_HAS_DCCM
 	/*
 	 * DCCM can be arbit placed in hardware.
-	 * Make sure it's placement/sz matches what Linux is built with
+	 * Make sure its placement/sz matches what Linux is built with
 	 */
-	if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr)
+	if ((unsigned int)__arc_dccm_base != info->dccm.base)
 		panic("Linux built with incorrect DCCM Base address\n");
 
-	if (CONFIG_ARC_DCCM_SZ != cpu->dccm.sz)
+	if (CONFIG_ARC_DCCM_SZ * SZ_1K != info->dccm.sz)
 		panic("Linux built with incorrect DCCM Size\n");
 #endif
 
 #ifdef CONFIG_ARC_HAS_ICCM
-	if (CONFIG_ARC_ICCM_SZ != cpu->iccm.sz)
+	if (CONFIG_ARC_ICCM_SZ * SZ_1K != info->iccm.sz)
 		panic("Linux built with incorrect ICCM Size\n");
 #endif
-
-	/*
-	 * FP hardware/software config sanity
-	 * -If hardware present, kernel needs to save/restore FPU state
-	 * -If not, it will crash trying to save/restore the non-existant regs
-	 */
-
-	if (is_isa_arcompact()) {
-		opt_nm = "CONFIG_ARC_FPU_SAVE_RESTORE";
-		saved = IS_ENABLED(CONFIG_ARC_FPU_SAVE_RESTORE);
-
-		/* only DPDP checked since SP has no arch visible regs */
-		present = cpu->extn.fpu_dp;
-	} else {
-		opt_nm = "CONFIG_ARC_HAS_ACCL_REGS";
-		saved = IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS);
-
-		/* Accumulator Low:High pair (r58:59) present if DSP MPY or FPU */
-		present = cpu->extn_mpy.dsp | cpu->extn.fpu_sp | cpu->extn.fpu_dp;
-	}
-
-	if (present && !saved)
-		pr_warn("Enable %s for working apps\n", opt_nm);
-	else if (!present && saved)
-		panic("Disable %s, hardware NOT present\n", opt_nm);
 }
 
 /*
@@ -452,21 +413,19 @@ static void arc_chk_core_config(void)
 
 void setup_processor(void)
 {
+	struct cpuinfo_arc info;
+	int c = smp_processor_id();
 	char str[512];
-	int cpu_id = smp_processor_id();
 
-	read_arc_build_cfg_regs();
-	arc_init_IRQ();
+	pr_info("%s", arc_cpu_mumbojumbo(c, &info, str, sizeof(str)));
+	pr_info("%s", arc_platform_smp_cpuinfo());
 
-	pr_info("%s", arc_cpu_mumbojumbo(cpu_id, str, sizeof(str)));
+	arc_chk_core_config(&info);
 
+	arc_init_IRQ();
 	arc_mmu_init();
 	arc_cache_init();
 
-	pr_info("%s", arc_extn_mumbojumbo(cpu_id, str, sizeof(str)));
-	pr_info("%s", arc_platform_smp_cpuinfo());
-
-	arc_chk_core_config();
 }
 
 static inline bool uboot_arg_invalid(unsigned long addr)
@@ -572,10 +531,6 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	root_mountflags &= ~MS_RDONLY;
 
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-
 	arc_unwind_init();
 }
 
@@ -617,6 +572,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	char *str;
 	int cpu_id = ptr_to_cpu(v);
 	struct device *cpu_dev = get_cpu_device(cpu_id);
+	struct cpuinfo_arc info;
 	struct clk *cpu_clk;
 	unsigned long freq = 0;
 
@@ -629,7 +585,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	if (!str)
 		goto done;
 
-	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE));
+	seq_printf(m, arc_cpu_mumbojumbo(cpu_id, &info, str, PAGE_SIZE));
 
 	cpu_clk = clk_get(cpu_dev, NULL);
 	if (IS_ERR(cpu_clk)) {
@@ -646,9 +602,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		   loops_per_jiffy / (500000 / HZ),
 		   (loops_per_jiffy / (5000 / HZ)) % 100);
 
-	seq_printf(m, arc_mmu_mumbojumbo(cpu_id, str, PAGE_SIZE));
-	seq_printf(m, arc_cache_mumbojumbo(cpu_id, str, PAGE_SIZE));
-	seq_printf(m, arc_extn_mumbojumbo(cpu_id, str, PAGE_SIZE));
 	seq_printf(m, arc_platform_smp_cpuinfo());
 
 	free_page((unsigned long)str);
diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c
index 3d57ed0d8535..fefa705a8638 100644
--- a/arch/arc/kernel/signal.c
+++ b/arch/arc/kernel/signal.c
@@ -8,15 +8,16 @@
  *
  * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK)
  *  -do_signal() supports TIF_RESTORE_SIGMASK
- *  -do_signal() no loner needs oldset, required by OLD sys_sigsuspend
- *  -sys_rt_sigsuspend() now comes from generic code, so discard arch implemen
+ *  -do_signal() no longer needs oldset, required by OLD sys_sigsuspend
+ *  -sys_rt_sigsuspend() now comes from generic code, so discard arch
+ *   implementation
  *  -sys_sigsuspend() no longer needs to fudge ptregs, hence that arg removed
  *  -sys_sigsuspend() no longer loops for do_signal(), sets TIF_xxx and leaves
  *   the job to do_signal()
  *
  * vineetg: July 2009
  *  -Modified Code to support the uClibc provided userland sigreturn stub
- *   to avoid kernel synthesing it on user stack at runtime, costing TLB
+ *   to avoid kernel synthesizing it on user stack at runtime, costing TLB
  *   probes and Cache line flushes.
  *
  * vineetg: July 2009
@@ -49,10 +50,11 @@
 #include <linux/personality.h>
 #include <linux/uaccess.h>
 #include <linux/syscalls.h>
-#include <linux/tracehook.h>
+#include <linux/resume_user_mode.h>
 #include <linux/sched/task_stack.h>
 
 #include <asm/ucontext.h>
+#include <asm/entry.h>
 
 struct rt_sigframe {
 	struct siginfo info;
@@ -61,6 +63,41 @@ struct rt_sigframe {
 	unsigned int sigret_magic;
 };
 
+static int save_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	v2abi.r30 = regs->r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	v2abi.r58 = regs->r58;
+	v2abi.r59 = regs->r59;
+#else
+	v2abi.r58 = v2abi.r59 = 0;
+#endif
+	err = __copy_to_user(&mctx->v2abi, (void const *)&v2abi, sizeof(v2abi));
+#endif
+	return err;
+}
+
+static int restore_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs)
+{
+	int err = 0;
+#ifndef CONFIG_ISA_ARCOMPACT
+	struct user_regs_arcv2 v2abi;
+
+	err = __copy_from_user(&v2abi, &mctx->v2abi, sizeof(v2abi));
+
+	regs->r30 = v2abi.r30;
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	regs->r58 = v2abi.r58;
+	regs->r59 = v2abi.r59;
+#endif
+#endif
+	return err;
+}
+
 static int
 stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 	       sigset_t *set)
@@ -94,9 +131,13 @@ stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs,
 
 	err = __copy_to_user(&(sf->uc.uc_mcontext.regs.scratch), &uregs.scratch,
 			     sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= save_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t));
 
-	return err;
+	return err ? -EFAULT : 0;
 }
 
 static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
@@ -109,8 +150,12 @@ static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf)
 	err |= __copy_from_user(&uregs.scratch,
 				&(sf->uc.uc_mcontext.regs.scratch),
 				sizeof(sf->uc.uc_mcontext.regs.scratch));
+
+	if (is_isa_arcv2())
+		err |= restore_arcv2_regs(&(sf->uc.uc_mcontext), regs);
+
 	if (err)
-		return err;
+		return -EFAULT;
 
 	set_current_blocked(&set);
 	regs->bta	= uregs.scratch.bta;
@@ -259,7 +304,7 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
 		regs->r2 = (unsigned long)&sf->uc;
 
 		/*
-		 * small optim to avoid unconditonally calling do_sigaltstack
+		 * small optim to avoid unconditionally calling do_sigaltstack
 		 * in sigreturn path, now that we only have rt_sigreturn
 		 */
 		magic = MAGIC_SIGALTSTK;
@@ -276,7 +321,7 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
 	regs->ret = (unsigned long)ksig->ka.sa.sa_handler;
 
 	/*
-	 * handler returns using sigreturn stub provided already by userpsace
+	 * handler returns using sigreturn stub provided already by userspace
 	 * If not, nuke the process right away
 	 */
 	if(!(ksig->ka.sa.sa_flags & SA_RESTORER))
@@ -321,7 +366,7 @@ static void arc_restart_syscall(struct k_sigaction *ka, struct pt_regs *regs)
 			regs->r0 = -EINTR;
 			break;
 		}
-		/* fallthrough */
+		fallthrough;
 
 	case -ERESTARTNOINTR:
 		/*
@@ -362,7 +407,7 @@ void do_signal(struct pt_regs *regs)
 
 	restart_scall = in_syscall(regs) && syscall_restartable(regs);
 
-	if (get_signal(&ksig)) {
+	if (test_thread_flag(TIF_SIGPENDING) && get_signal(&ksig)) {
 		if (restart_scall) {
 			arc_restart_syscall(&ksig.ka, regs);
 			syscall_wont_restart(regs);	/* No more restarts */
@@ -391,9 +436,9 @@ void do_signal(struct pt_regs *regs)
 void do_notify_resume(struct pt_regs *regs)
 {
 	/*
-	 * ASM glue gaurantees that this is only called when returning to
+	 * ASM glue guarantees that this is only called when returning to
 	 * user mode
 	 */
-	if (test_and_clear_thread_flag(TIF_NOTIFY_RESUME))
-		tracehook_notify_resume(regs);
+	if (test_thread_flag(TIF_NOTIFY_RESUME))
+		resume_user_mode_work(regs);
 }
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index eca35e02ce06..b2f2c59279a6 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -23,28 +23,22 @@
 #include <linux/export.h>
 #include <linux/of_fdt.h>
 
-#include <asm/processor.h>
-#include <asm/setup.h>
 #include <asm/mach_desc.h>
+#include <asm/setup.h>
+#include <asm/smp.h>
+#include <asm/processor.h>
 
 #ifndef CONFIG_ARC_HAS_LLSC
 arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
-arch_spinlock_t smp_bitops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
 
 EXPORT_SYMBOL_GPL(smp_atomic_ops_lock);
-EXPORT_SYMBOL_GPL(smp_bitops_lock);
 #endif
 
 struct plat_smp_ops  __weak plat_smp_ops;
 
-/* XXX: per cpu ? Only needed once in early seconday boot */
+/* XXX: per cpu ? Only needed once in early secondary boot */
 struct task_struct *secondary_idle_tsk;
 
-/* Called from start_kernel */
-void __init smp_prepare_boot_cpu(void)
-{
-}
-
 static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask)
 {
 	unsigned long dt_root = of_get_flat_dt_root();
@@ -189,7 +183,6 @@ void start_kernel_secondary(void)
 	pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
 
 	local_irq_enable();
-	preempt_disable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
 }
 
@@ -226,7 +219,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	}
 
 	if (!cpu_online(cpu)) {
-		pr_info("Timeout: CPU%u FAILED to comeup !!!\n", cpu);
+		pr_info("Timeout: CPU%u FAILED to come up !!!\n", cpu);
 		return -1;
 	}
 
@@ -235,14 +228,6 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-/*
- * not supported here
- */
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
-
 /*****************************************************************************/
 /*              Inter Processor Interrupt Handling                           */
 /*****************************************************************************/
@@ -277,14 +262,14 @@ static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg)
 	 * and read back old value
 	 */
 	do {
-		new = old = READ_ONCE(*ipi_data_ptr);
+		new = old = *ipi_data_ptr;
 		new |= 1U << msg;
 	} while (cmpxchg(ipi_data_ptr, old, new) != old);
 
 	/*
 	 * Call the platform specific IPI kick function, but avoid if possible:
 	 * Only do so if there's no pending msg from other concurrent sender(s).
-	 * Otherwise, recevier will see this msg as well when it takes the
+	 * Otherwise, receiver will see this msg as well when it takes the
 	 * IPI corresponding to that msg. This is true, even if it is already in
 	 * IPI handler, because !@old means it has not yet dequeued the msg(s)
 	 * so @new msg can be a free-loader
@@ -303,7 +288,7 @@ static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg)
 		ipi_send_msg_one(cpu, msg);
 }
 
-void smp_send_reschedule(int cpu)
+void arch_smp_send_reschedule(int cpu)
 {
 	ipi_send_msg_one(cpu, IPI_RESCHEDULE);
 }
@@ -362,7 +347,7 @@ static inline int __do_IPI(unsigned long msg)
  * arch-common ISR to handle for inter-processor interrupts
  * Has hooks for platform specific IPI
  */
-irqreturn_t do_IPI(int irq, void *dev_id)
+static irqreturn_t do_IPI(int irq, void *dev_id)
 {
 	unsigned long pending;
 	unsigned long __maybe_unused copy;
@@ -396,7 +381,7 @@ irqreturn_t do_IPI(int irq, void *dev_id)
  * API called by platform code to hookup arch-common ISR to their IPI IRQ
  *
  * Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map
- * function needs to call call irq_set_percpu_devid() for IPI IRQ, otherwise
+ * function needs to call irq_set_percpu_devid() for IPI IRQ, otherwise
  * request_percpu_irq() below will fail
  */
 static DEFINE_PER_CPU(int, ipi_dev);
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c
index 1e440bbfa876..ea99c066ef25 100644
--- a/arch/arc/kernel/stacktrace.c
+++ b/arch/arc/kernel/stacktrace.c
@@ -15,7 +15,7 @@
  *      = specifics of data structs where trace is saved(CONFIG_STACKTRACE etc)
  *
  *  vineetg: March 2009
- *  -Implemented correct versions of thread_saved_pc() and get_wchan()
+ *  -Implemented correct versions of thread_saved_pc() and __get_wchan()
  *
  *  rajeshwarr: 2008
  *  -Initial implementation
@@ -29,6 +29,7 @@
 
 #include <asm/arcregs.h>
 #include <asm/unwind.h>
+#include <asm/stacktrace.h>
 #include <asm/switch_to.h>
 
 /*-------------------------------------------------------------------------
@@ -38,15 +39,27 @@
 
 #ifdef CONFIG_ARC_DW2_UNWIND
 
-static void seed_unwind_frame_info(struct task_struct *tsk,
-				   struct pt_regs *regs,
-				   struct unwind_frame_info *frame_info)
+static int
+seed_unwind_frame_info(struct task_struct *tsk, struct pt_regs *regs,
+		       struct unwind_frame_info *frame_info)
 {
-	/*
-	 * synchronous unwinding (e.g. dump_stack)
-	 *  - uses current values of SP and friends
-	 */
-	if (tsk == NULL && regs == NULL) {
+	if (regs) {
+		/*
+		 * Asynchronous unwinding of intr/exception
+		 *  - Just uses the pt_regs passed
+		 */
+		frame_info->task = tsk;
+
+		frame_info->regs.r27 = regs->fp;
+		frame_info->regs.r28 = regs->sp;
+		frame_info->regs.r31 = regs->blink;
+		frame_info->regs.r63 = regs->ret;
+		frame_info->call_frame = 0;
+	} else if (tsk == NULL || tsk == current) {
+		/*
+		 * synchronous unwinding (e.g. dump_stack)
+		 *  - uses current values of SP and friends
+		 */
 		unsigned long fp, sp, blink, ret;
 		frame_info->task = current;
 
@@ -63,13 +76,17 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
 		frame_info->regs.r31 = blink;
 		frame_info->regs.r63 = ret;
 		frame_info->call_frame = 0;
-	} else if (regs == NULL) {
+	} else {
 		/*
-		 * Asynchronous unwinding of sleeping task
-		 *  - Gets SP etc from task's pt_regs (saved bottom of kernel
-		 *    mode stack of task)
+		 * Asynchronous unwinding of a likely sleeping task
+		 *  - first ensure it is actually sleeping
+		 *  - if so, it will be in __switch_to, kernel mode SP of task
+		 *    is safe-kept and BLINK at a well known location in there
 		 */
 
+		if (task_is_running(tsk))
+			return -1;
+
 		frame_info->task = tsk;
 
 		frame_info->regs.r27 = TSK_K_FP(tsk);
@@ -90,19 +107,8 @@ static void seed_unwind_frame_info(struct task_struct *tsk,
 		frame_info->regs.r28 += 60;
 		frame_info->call_frame = 0;
 
-	} else {
-		/*
-		 * Asynchronous unwinding of intr/exception
-		 *  - Just uses the pt_regs passed
-		 */
-		frame_info->task = tsk;
-
-		frame_info->regs.r27 = regs->fp;
-		frame_info->regs.r28 = regs->sp;
-		frame_info->regs.r31 = regs->blink;
-		frame_info->regs.r63 = regs->ret;
-		frame_info->call_frame = 0;
 	}
+	return 0;
 }
 
 #endif
@@ -112,11 +118,12 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 		int (*consumer_fn) (unsigned int, void *), void *arg)
 {
 #ifdef CONFIG_ARC_DW2_UNWIND
-	int ret = 0;
+	int ret = 0, cnt = 0;
 	unsigned int address;
 	struct unwind_frame_info frame_info;
 
-	seed_unwind_frame_info(tsk, regs, &frame_info);
+	if (seed_unwind_frame_info(tsk, regs, &frame_info))
+		return 0;
 
 	while (1) {
 		address = UNW_PC(&frame_info);
@@ -132,13 +139,18 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 			break;
 
 		frame_info.regs.r63 = frame_info.regs.r31;
+
+		if (cnt++ > 128) {
+			printk("unwinder looping too long, aborting !\n");
+			return 0;
+		}
 	}
 
 	return address;		/* return the last address it saw */
 #else
 	/* On ARC, only Dward based unwinder works. fp based backtracing is
 	 * not possible (-fno-omit-frame-pointer) because of the way function
-	 * prelogue is setup (callee regs saved and then fp set and not other
+	 * prologue is setup (callee regs saved and then fp set and not other
 	 * way around
 	 */
 	pr_warn_once("CONFIG_ARC_DW2_UNWIND needs to be enabled\n");
@@ -158,9 +170,11 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 /* Call-back which plugs into unwinding core to dump the stack in
  * case of panic/OOPs/BUG etc
  */
-static int __print_sym(unsigned int address, void *unused)
+static int __print_sym(unsigned int address, void *arg)
 {
-	printk("  %pS\n", (void *)address);
+	const char *loglvl = arg;
+
+	printk("%s  %pS\n", loglvl, (void *)address);
 	return 0;
 }
 
@@ -217,24 +231,25 @@ static int __get_first_nonsched(unsigned int address, void *unused)
  *-------------------------------------------------------------------------
  */
 
-noinline void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs)
+noinline void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs,
+			      const char *loglvl)
 {
-	pr_info("\nStack Trace:\n");
-	arc_unwind_core(tsk, regs, __print_sym, NULL);
+	printk("%s\nStack Trace:\n", loglvl);
+	arc_unwind_core(tsk, regs, __print_sym, (void *)loglvl);
 }
 EXPORT_SYMBOL(show_stacktrace);
 
 /* Expected by sched Code */
-void show_stack(struct task_struct *tsk, unsigned long *sp)
+void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 {
-	show_stacktrace(tsk, NULL);
+	show_stacktrace(tsk, NULL, loglvl);
 }
 
 /* Another API expected by schedular, shows up in "ps" as Wait Channel
  * Of course just returning schedule( ) would be pointless so unwind until
  * the function is not in schedular code
  */
-unsigned int get_wchan(struct task_struct *tsk)
+unsigned int __get_wchan(struct task_struct *tsk)
 {
 	return arc_unwind_core(tsk, NULL, __get_first_nonsched, NULL);
 }
diff --git a/arch/arc/kernel/sys.c b/arch/arc/kernel/sys.c
index fddecc76efb7..36a2a95c083b 100644
--- a/arch/arc/kernel/sys.c
+++ b/arch/arc/kernel/sys.c
@@ -7,11 +7,13 @@
 #include <asm/syscalls.h>
 
 #define sys_clone	sys_clone_wrapper
+#define sys_clone3	sys_clone3_wrapper
+#define sys_mmap2	sys_mmap_pgoff
 
-#undef __SYSCALL
 #define __SYSCALL(nr, call) [nr] = (call),
+#define __SYSCALL_WITH_COMPAT(nr, native, compat)  __SYSCALL(nr, native)
 
 void *sys_call_table[NR_syscalls] = {
 	[0 ... NR_syscalls-1] = sys_ni_syscall,
-#include <asm/unistd.h>
+#include <asm/syscall_table_32.h>
 };
diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c
index 57235e5c0cea..8d2ea2cbd98b 100644
--- a/arch/arc/kernel/traps.c
+++ b/arch/arc/kernel/traps.c
@@ -16,14 +16,11 @@
 #include <linux/ptrace.h>
 #include <linux/kprobes.h>
 #include <linux/kgdb.h>
+#include <asm/entry.h>
 #include <asm/setup.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 #include <asm/kprobes.h>
-
-void __init trap_init(void)
-{
-	return;
-}
+#include "unaligned.h"
 
 void die(const char *str, struct pt_regs *regs, unsigned long address)
 {
@@ -93,7 +90,7 @@ int do_misaligned_access(unsigned long address, struct pt_regs *regs,
 
 /*
  * Entry point for miscll errors such as Nested Exceptions
- *  -Duplicate TLB entry is handled seperately though
+ *  -Duplicate TLB entry is handled separately though
  */
 void do_machine_check_fault(unsigned long address, struct pt_regs *regs)
 {
@@ -114,9 +111,7 @@ void do_machine_check_fault(unsigned long address, struct pt_regs *regs)
  */
 void do_non_swi_trap(unsigned long address, struct pt_regs *regs)
 {
-	unsigned int param = regs->ecr_param;
-
-	switch (param) {
+	switch (regs->ecr.param) {
 	case 1:
 		trap_is_brkpt(address, regs);
 		break;
diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c
index b79886a6cec8..c380d8c30704 100644
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@@ -18,44 +18,37 @@
 
 #define ARC_PATH_MAX	256
 
-/*
- * Common routine to print scratch regs (r0-r12) or callee regs (r13-r25)
- *   -Prints 3 regs per line and a CR.
- *   -To continue, callee regs right after scratch, special handling of CR
- */
-static noinline void print_reg_file(long *reg_rev, int start_num)
+static noinline void print_regs_scratch(struct pt_regs *regs)
 {
-	unsigned int i;
-	char buf[512];
-	int n = 0, len = sizeof(buf);
-
-	for (i = start_num; i < start_num + 13; i++) {
-		n += scnprintf(buf + n, len - n, "r%02u: 0x%08lx\t",
-			       i, (unsigned long)*reg_rev);
-
-		if (((i + 1) % 3) == 0)
-			n += scnprintf(buf + n, len - n, "\n");
-
-		/* because pt_regs has regs reversed: r12..r0, r25..r13 */
-		if (is_isa_arcv2() && start_num == 0)
-			reg_rev++;
-		else
-			reg_rev--;
-	}
-
-	if (start_num != 0)
-		n += scnprintf(buf + n, len - n, "\n\n");
-
-	/* To continue printing callee regs on same line as scratch regs */
-	if (start_num == 0)
-		pr_info("%s", buf);
-	else
-		pr_cont("%s\n", buf);
+	pr_cont("BTA: 0x%08lx\n SP: 0x%08lx  FP: 0x%08lx BLK: %pS\n",
+		regs->bta, regs->sp, regs->fp, (void *)regs->blink);
+	pr_cont("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
+		regs->lp_start, regs->lp_end, regs->lp_count);
+
+	pr_info("r00: 0x%08lx\tr01: 0x%08lx\tr02: 0x%08lx\n"	\
+		"r03: 0x%08lx\tr04: 0x%08lx\tr05: 0x%08lx\n"	\
+		"r06: 0x%08lx\tr07: 0x%08lx\tr08: 0x%08lx\n"	\
+		"r09: 0x%08lx\tr10: 0x%08lx\tr11: 0x%08lx\n"	\
+		"r12: 0x%08lx\t",
+		regs->r0, regs->r1, regs->r2,
+		regs->r3, regs->r4, regs->r5,
+		regs->r6, regs->r7, regs->r8,
+		regs->r9, regs->r10, regs->r11,
+		regs->r12);
 }
 
-static void show_callee_regs(struct callee_regs *cregs)
+static void print_regs_callee(struct callee_regs *regs)
 {
-	print_reg_file(&(cregs->r13), 13);
+	pr_cont("r13: 0x%08lx\tr14: 0x%08lx\n"			\
+		"r15: 0x%08lx\tr16: 0x%08lx\tr17: 0x%08lx\n"	\
+		"r18: 0x%08lx\tr19: 0x%08lx\tr20: 0x%08lx\n"	\
+		"r21: 0x%08lx\tr22: 0x%08lx\tr23: 0x%08lx\n"	\
+		"r24: 0x%08lx\tr25: 0x%08lx\n",
+		regs->r13, regs->r14,
+		regs->r15, regs->r16, regs->r17,
+		regs->r18, regs->r19, regs->r20,
+		regs->r21, regs->r22, regs->r23,
+		regs->r24, regs->r25);
 }
 
 static void print_task_path_n_nm(struct task_struct *tsk)
@@ -89,30 +82,31 @@ static void show_faulting_vma(unsigned long address)
 	/* can't use print_vma_addr() yet as it doesn't check for
 	 * non-inclusive vma
 	 */
-	down_read(&active_mm->mmap_sem);
-	vma = find_vma(active_mm, address);
+	mmap_read_lock(active_mm);
+	vma = vma_lookup(active_mm, address);
 
-	/* check against the find_vma( ) behaviour which returns the next VMA
-	 * if the container VMA is not found
+	/* Lookup the vma at the address and report if the container VMA is not
+	 * found
 	 */
-	if (vma && (vma->vm_start <= address)) {
+	if (vma) {
 		char buf[ARC_PATH_MAX];
-		char *nm = "?";
+		char *nm = "anon";
 
 		if (vma->vm_file) {
-			nm = file_path(vma->vm_file, buf, ARC_PATH_MAX-1);
+			/* XXX: can we use %pD below and get rid of buf? */
+			nm = d_path(file_user_path(vma->vm_file), buf,
+				    ARC_PATH_MAX-1);
 			if (IS_ERR(nm))
 				nm = "?";
 		}
-		pr_info("    @off 0x%lx in [%s]\n"
-			"    VMA: 0x%08lx to 0x%08lx\n",
+		pr_info("  @off 0x%lx in [%s]  VMA: 0x%08lx to 0x%08lx\n",
 			vma->vm_start < TASK_UNMAPPED_BASE ?
 				address : address - vma->vm_start,
 			nm, vma->vm_start, vma->vm_end);
 	} else
 		pr_info("    @No matching VMA found\n");
 
-	up_read(&active_mm->mmap_sem);
+	mmap_read_unlock(active_mm);
 }
 
 static void show_ecr_verbose(struct pt_regs *regs)
@@ -120,20 +114,18 @@ static void show_ecr_verbose(struct pt_regs *regs)
 	unsigned int vec, cause_code;
 	unsigned long address;
 
-	pr_info("\n[ECR   ]: 0x%08lx => ", regs->event);
-
 	/* For Data fault, this is data address not instruction addr */
 	address = current->thread.fault_address;
 
-	vec = regs->ecr_vec;
-	cause_code = regs->ecr_cause;
+	vec = regs->ecr.vec;
+	cause_code = regs->ecr.cause;
 
 	/* For DTLB Miss or ProtV, display the memory involved too */
 	if (vec == ECR_V_DTLB_MISS) {
-		pr_cont("Invalid %s @ 0x%08lx by insn @ 0x%08lx\n",
+		pr_cont("Invalid %s @ 0x%08lx by insn @ %pS\n",
 		       (cause_code == 0x01) ? "Read" :
 		       ((cause_code == 0x02) ? "Write" : "EX"),
-		       address, regs->ret);
+		       address, (void *)regs->ret);
 	} else if (vec == ECR_V_ITLB_MISS) {
 		pr_cont("Insn could not be fetched\n");
 	} else if (vec == ECR_V_MACH_CHK) {
@@ -164,7 +156,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
 		pr_cont("Misaligned r/w from 0x%08lx\n", address);
 #endif
 	} else if (vec == ECR_V_TRAP) {
-		if (regs->ecr_param == 5)
+		if (regs->ecr.param == 5)
 			pr_cont("gcc generated __builtin_trap\n");
 	} else {
 		pr_cont("Check Programmer's Manual\n");
@@ -178,7 +170,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
 void show_regs(struct pt_regs *regs)
 {
 	struct task_struct *tsk = current;
-	struct callee_regs *cregs;
+	struct callee_regs *cregs = (struct callee_regs *)tsk->thread.callee_reg;
 
 	/*
 	 * generic code calls us with preemption disabled, but some calls
@@ -191,43 +183,32 @@ void show_regs(struct pt_regs *regs)
 
 	show_ecr_verbose(regs);
 
-	pr_info("[EFA   ]: 0x%08lx\n[BLINK ]: %pS\n[ERET  ]: %pS\n",
-		current->thread.fault_address,
-		(void *)regs->blink, (void *)regs->ret);
-
 	if (user_mode(regs))
 		show_faulting_vma(regs->ret); /* faulting code, not data */
 
-	pr_info("[STAT32]: 0x%08lx", regs->status32);
+	pr_info("ECR: 0x%08lx EFA: 0x%08lx ERET: 0x%08lx\n",
+		regs->ecr.full, current->thread.fault_address, regs->ret);
+
+	pr_info("STAT32: 0x%08lx", regs->status32);
 
 #define STS_BIT(r, bit)	r->status32 & STATUS_##bit##_MASK ? #bit" " : ""
 
 #ifdef CONFIG_ISA_ARCOMPACT
-	pr_cont(" : %2s%2s%2s%2s%2s%2s%2s\n",
+	pr_cont(" [%2s%2s%2s%2s%2s%2s%2s]",
 			(regs->status32 & STATUS_U_MASK) ? "U " : "K ",
 			STS_BIT(regs, DE), STS_BIT(regs, AE),
 			STS_BIT(regs, A2), STS_BIT(regs, A1),
 			STS_BIT(regs, E2), STS_BIT(regs, E1));
 #else
-	pr_cont(" : %2s%2s%2s%2s\n",
+	pr_cont(" [%2s%2s%2s%2s]   ",
 			STS_BIT(regs, IE),
 			(regs->status32 & STATUS_U_MASK) ? "U " : "K ",
 			STS_BIT(regs, DE), STS_BIT(regs, AE));
 #endif
-	pr_info("BTA: 0x%08lx\t SP: 0x%08lx\t FP: 0x%08lx\n",
-		regs->bta, regs->sp, regs->fp);
-	pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
-	       regs->lp_start, regs->lp_end, regs->lp_count);
-
-	/* print regs->r0 thru regs->r12
-	 * Sequential printing was generating horrible code
-	 */
-	print_reg_file(&(regs->r0), 0);
 
-	/* If Callee regs were saved, display them too */
-	cregs = (struct callee_regs *)current->thread.callee_reg;
+	print_regs_scratch(regs);
 	if (cregs)
-		show_callee_regs(cregs);
+		print_regs_callee(cregs);
 
 	preempt_disable();
 }
@@ -245,5 +226,5 @@ void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
 
 	/* Show stack trace if this Fatality happened in kernel mode */
 	if (!user_mode(regs))
-		show_stacktrace(current, regs);
+		show_stacktrace(current, regs, KERN_DEFAULT);
 }
diff --git a/arch/arc/kernel/unaligned.c b/arch/arc/kernel/unaligned.c
index d63ebd81f1c6..3b2d8b1bd271 100644
--- a/arch/arc/kernel/unaligned.c
+++ b/arch/arc/kernel/unaligned.c
@@ -12,6 +12,7 @@
 #include <linux/ptrace.h>
 #include <linux/uaccess.h>
 #include <asm/disasm.h>
+#include "unaligned.h"
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
 #define BE		1
@@ -199,7 +200,6 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 		     struct callee_regs *cregs)
 {
 	struct disasm_state state;
-	char buf[TASK_COMM_LEN];
 
 	/* handle user mode only and only if enabled by sysadmin */
 	if (!user_mode(regs) || !unaligned_enabled)
@@ -211,11 +211,11 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 			     " performance significantly\n. To enable further"
 			     " logging of such instances, please \n"
 			     " echo 0 > /proc/sys/kernel/ignore-unaligned-usertrap\n",
-			     get_task_comm(buf, current), task_pid_nr(current));
+			     current->comm, task_pid_nr(current));
 	} else {
 		/* Add rate limiting if it gets down to it */
 		pr_warn("%s(%d): unaligned access to/from 0x%lx by PC: 0x%lx\n",
-			get_task_comm(buf, current), task_pid_nr(current),
+			current->comm, task_pid_nr(current),
 			address, regs->ret);
 
 	}
@@ -237,7 +237,7 @@ int misaligned_fixup(unsigned long address, struct pt_regs *regs,
 	if (state.fault)
 		goto fault;
 
-	/* clear any remanants of delay slot */
+	/* clear any remnants of delay slot */
 	if (delay_mode(regs)) {
 		regs->ret = regs->bta & ~1U;
 		regs->status32 &= ~STATUS_DE_MASK;
diff --git a/arch/arc/kernel/unaligned.h b/arch/arc/kernel/unaligned.h
new file mode 100644
index 000000000000..5244453bb85f
--- /dev/null
+++ b/arch/arc/kernel/unaligned.h
@@ -0,0 +1,16 @@
+struct pt_regs;
+struct callee_regs;
+
+#ifdef CONFIG_ARC_EMUL_UNALIGNED
+int misaligned_fixup(unsigned long address, struct pt_regs *regs,
+		     struct callee_regs *cregs);
+#else
+static inline int
+misaligned_fixup(unsigned long address, struct pt_regs *regs,
+		 struct callee_regs *cregs)
+{
+	/* Not fixed */
+	return 1;
+}
+#endif
+
diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c
index dc05a63516f5..789cfb9ea14e 100644
--- a/arch/arc/kernel/unwind.c
+++ b/arch/arc/kernel/unwind.c
@@ -19,7 +19,7 @@
 #include <linux/uaccess.h>
 #include <linux/ptrace.h>
 #include <asm/sections.h>
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 #include <asm/unwind.h>
 
 extern char __start_unwind[], __end_unwind[];
@@ -42,10 +42,10 @@ do {						\
 
 #define EXTRA_INFO(f) { \
 		BUILD_BUG_ON_ZERO(offsetof(struct unwind_frame_info, f) \
-				% FIELD_SIZEOF(struct unwind_frame_info, f)) \
+				% sizeof_field(struct unwind_frame_info, f)) \
 				+ offsetof(struct unwind_frame_info, f) \
-				/ FIELD_SIZEOF(struct unwind_frame_info, f), \
-				FIELD_SIZEOF(struct unwind_frame_info, f) \
+				/ sizeof_field(struct unwind_frame_info, f), \
+				sizeof_field(struct unwind_frame_info, f) \
 	}
 #define PTREGS_INFO(f) EXTRA_INFO(regs.f)
 
@@ -187,25 +187,26 @@ static void init_unwind_table(struct unwind_table *table, const char *name,
 			      const void *table_start, unsigned long table_size,
 			      const u8 *header_start, unsigned long header_size)
 {
-	const u8 *ptr = header_start + 4;
-	const u8 *end = header_start + header_size;
-
 	table->core.pc = (unsigned long)core_start;
 	table->core.range = core_size;
 	table->init.pc = (unsigned long)init_start;
 	table->init.range = init_size;
 	table->address = table_start;
 	table->size = table_size;
-
-	/* See if the linker provided table looks valid. */
-	if (header_size <= 4
-	    || header_start[0] != 1
-	    || (void *)read_pointer(&ptr, end, header_start[1]) != table_start
-	    || header_start[2] == DW_EH_PE_omit
-	    || read_pointer(&ptr, end, header_start[2]) <= 0
-	    || header_start[3] == DW_EH_PE_omit)
-		header_start = NULL;
-
+	/* To avoid the pointer addition with NULL pointer.*/
+	if (header_start != NULL) {
+		const u8 *ptr = header_start + 4;
+		const u8 *end = header_start + header_size;
+		/* See if the linker provided table looks valid. */
+		if (header_size <= 4
+		|| header_start[0] != 1
+		|| (void *)read_pointer(&ptr, end, header_start[1])
+				!= table_start
+		|| header_start[2] == DW_EH_PE_omit
+		|| read_pointer(&ptr, end, header_start[2]) <= 0
+		|| header_start[3] == DW_EH_PE_omit)
+			header_start = NULL;
+	}
 	table->hdrsz = header_size;
 	smp_wmb();
 	table->header = header_start;
@@ -240,26 +241,12 @@ static int cmp_eh_frame_hdr_table_entries(const void *p1, const void *p2)
 	return (e1->start > e2->start) - (e1->start < e2->start);
 }
 
-static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size)
-{
-	struct eh_frame_hdr_table_entry *e1 = p1;
-	struct eh_frame_hdr_table_entry *e2 = p2;
-	unsigned long v;
-
-	v = e1->start;
-	e1->start = e2->start;
-	e2->start = v;
-	v = e1->fde;
-	e1->fde = e2->fde;
-	e2->fde = v;
-}
-
 static void init_unwind_hdr(struct unwind_table *table,
 			    void *(*alloc) (unsigned long))
 {
 	const u8 *ptr;
 	unsigned long tableSize = table->size, hdrSize;
-	unsigned n;
+	unsigned int n;
 	const u32 *fde;
 	struct {
 		u8 version;
@@ -349,7 +336,7 @@ static void init_unwind_hdr(struct unwind_table *table,
 	sort(header->table,
 	     n,
 	     sizeof(*header->table),
-	     cmp_eh_frame_hdr_table_entries, swap_eh_frame_hdr_table_entries);
+	     cmp_eh_frame_hdr_table_entries, NULL);
 
 	table->hdrsz = hdrSize;
 	smp_wmb();
@@ -373,6 +360,8 @@ void *unwind_add_table(struct module *module, const void *table_start,
 		       unsigned long table_size)
 {
 	struct unwind_table *table;
+	struct module_memory *core_text;
+	struct module_memory *init_text;
 
 	if (table_size <= 0)
 		return NULL;
@@ -381,11 +370,11 @@ void *unwind_add_table(struct module *module, const void *table_start,
 	if (!table)
 		return NULL;
 
-	init_unwind_table(table, module->name,
-			  module->core_layout.base, module->core_layout.size,
-			  module->init_layout.base, module->init_layout.size,
-			  table_start, table_size,
-			  NULL, 0);
+	core_text = &module->mem[MOD_TEXT];
+	init_text = &module->mem[MOD_INIT_TEXT];
+
+	init_unwind_table(table, module->name, core_text->base, core_text->size,
+			  init_text->base, init_text->size, table_start, table_size, NULL, 0);
 
 	init_unwind_hdr(table, unw_hdr_alloc);
 
@@ -461,7 +450,7 @@ static uleb128_t get_uleb128(const u8 **pcur, const u8 *end)
 {
 	const u8 *cur = *pcur;
 	uleb128_t value;
-	unsigned shift;
+	unsigned int shift;
 
 	for (shift = 0, value = 0; cur < end; shift += 7) {
 		if (shift + 7 > 8 * sizeof(value)
@@ -482,7 +471,7 @@ static sleb128_t get_sleb128(const u8 **pcur, const u8 *end)
 {
 	const u8 *cur = *pcur;
 	sleb128_t value;
-	unsigned shift;
+	unsigned int shift;
 
 	for (shift = 0, value = 0; cur < end; shift += 7) {
 		if (shift + 7 > 8 * sizeof(value)
@@ -572,7 +561,7 @@ static unsigned long read_pointer(const u8 **pLoc, const void *end,
 #else
 		BUILD_BUG_ON(sizeof(u32) != sizeof(value));
 #endif
-		/* Fall through */
+		fallthrough;
 	case DW_EH_PE_native:
 		if (end < (const void *)(ptr.pul + 1))
 			return 0;
@@ -608,7 +597,7 @@ static unsigned long read_pointer(const u8 **pLoc, const void *end,
 static signed fde_pointer_type(const u32 *cie)
 {
 	const u8 *ptr = (const u8 *)(cie + 2);
-	unsigned version = *ptr;
+	unsigned int version = *ptr;
 
 	if (*++ptr) {
 		const char *aug;
@@ -827,7 +816,7 @@ static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc,
 			case DW_CFA_def_cfa:
 				state->cfa.reg = get_uleb128(&ptr.p8, end);
 				unw_debug("cfa_def_cfa: r%lu ", state->cfa.reg);
-				/* fall through */
+				fallthrough;
 			case DW_CFA_def_cfa_offset:
 				state->cfa.offs = get_uleb128(&ptr.p8, end);
 				unw_debug("cfa_def_cfa_offset: 0x%lx ",
@@ -835,7 +824,7 @@ static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc,
 				break;
 			case DW_CFA_def_cfa_sf:
 				state->cfa.reg = get_uleb128(&ptr.p8, end);
-				/* fall through */
+				fallthrough;
 			case DW_CFA_def_cfa_offset_sf:
 				state->cfa.offs = get_sleb128(&ptr.p8, end)
 				    * state->dataAlign;
@@ -903,7 +892,7 @@ int arc_unwind(struct unwind_frame_info *frame)
 	const u8 *ptr = NULL, *end = NULL;
 	unsigned long pc = UNW_PC(frame) - frame->call_frame;
 	unsigned long startLoc = 0, endLoc = 0, cfa;
-	unsigned i;
+	unsigned int i;
 	signed ptrType = -1;
 	uleb128_t retAddrReg = 0;
 	const struct unwind_table *table;
@@ -1178,11 +1167,9 @@ int arc_unwind(struct unwind_frame_info *frame)
 #endif
 
 	/* update frame */
-#ifndef CONFIG_AS_CFI_SIGNAL_FRAME
 	if (frame->call_frame
 	    && !UNW_DEFAULT_RA(state.regs[retAddrReg], state.dataAlign))
 		frame->call_frame = 0;
-#endif
 	cfa = FRAME_REG(state.cfa.reg, unsigned long) + state.cfa.offs;
 	startLoc = min_t(unsigned long, UNW_SP(frame), cfa);
 	endLoc = max_t(unsigned long, UNW_SP(frame), cfa);
diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S
index 6c693a9d29b6..61a1b2b96e1d 100644
--- a/arch/arc/kernel/vmlinux.lds.S
+++ b/arch/arc/kernel/vmlinux.lds.S
@@ -41,8 +41,8 @@ SECTIONS
 #endif
 
 	/*
-	 * The reason for having a seperate subsection .init.ramfs is to
-	 * prevent objump from including it in kernel dumps
+	 * The reason for having a separate subsection .init.ramfs is to
+	 * prevent objdump from including it in kernel dumps
 	 *
 	 * Reason for having .init.ramfs above .init is to make sure that the
 	 * binary blob is tucked away to one side, reducing the displacement
@@ -57,7 +57,6 @@ SECTIONS
 	.init.ramfs : { INIT_RAM_FS }
 
 	. = ALIGN(PAGE_SIZE);
-	_stext = .;
 
 	HEAD_TEXT_SECTION
 	INIT_TEXT_SECTION(L1_CACHE_BYTES)
@@ -83,11 +82,13 @@ SECTIONS
 
 	.text : {
 		_text = .;
+		_stext = .;
 		TEXT_TEXT
 		SCHED_TEXT
-		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	}
@@ -95,13 +96,13 @@ SECTIONS
 	_etext = .;
 
 	_sdata = .;
-	RO_DATA_SECTION(PAGE_SIZE)
+	RO_DATA(PAGE_SIZE)
 
 	/*
 	 * 1. this is .data essentially
 	 * 2. THREAD_SIZE for init.task, must be kernel-stk sz aligned
 	 */
-	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 
 	_edata = .;
 
@@ -118,12 +119,11 @@ SECTIONS
 	/DISCARD/ : {	*(.eh_frame) }
 #endif
 
-	NOTES
-
 	. = ALIGN(PAGE_SIZE);
 	_end = . ;
 
 	STABS_DEBUG
+	ELF_DETAILS
 	DISCARDS
 
 	.arcextmap 0 : {
diff --git a/arch/arc/lib/memset-archs.S b/arch/arc/lib/memset-archs.S
index d2e09fece5bc..d0a5cec4cdca 100644
--- a/arch/arc/lib/memset-archs.S
+++ b/arch/arc/lib/memset-archs.S
@@ -36,12 +36,13 @@
 #endif
 
 ENTRY_CFI(memset)
-	PREFETCHW_INSTR	r0, 0	; Prefetch the first write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
 	mov	r3, r0		; don't clobber ret val
 
+	PREFETCHW_INSTR	r0, 0	; Prefetch the first write location
+
 ;;; if length < 8
 	brls.d.nt	r2, 8, .Lsmallchunk
 	mov.f	lp_count,r2
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index a2fbea3ee07c..7d2f93dc1e91 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -28,6 +28,10 @@ int slc_enable = 1, ioc_enable = 1;
 unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
 unsigned long perip_end = 0xFFFFFFFF; /* legacy value */
 
+static struct cpuinfo_arc_cache {
+	unsigned int sz_k, line_len, colors;
+} ic_info, dc_info, slc_info;
+
 void (*_cache_line_loop_ic_fn)(phys_addr_t paddr, unsigned long vaddr,
 			       unsigned long sz, const int op, const int full_page);
 
@@ -35,78 +39,24 @@ void (*__dma_cache_wback_inv)(phys_addr_t start, unsigned long sz);
 void (*__dma_cache_inv)(phys_addr_t start, unsigned long sz);
 void (*__dma_cache_wback)(phys_addr_t start, unsigned long sz);
 
-char *arc_cache_mumbojumbo(int c, char *buf, int len)
-{
-	int n = 0;
-	struct cpuinfo_arc_cache *p;
-
-#define PR_CACHE(p, cfg, str)						\
-	if (!(p)->line_len)						\
-		n += scnprintf(buf + n, len - n, str"\t\t: N/A\n");	\
-	else								\
-		n += scnprintf(buf + n, len - n,			\
-			str"\t\t: %uK, %dway/set, %uB Line, %s%s%s\n",	\
-			(p)->sz_k, (p)->assoc, (p)->line_len,		\
-			(p)->vipt ? "VIPT" : "PIPT",			\
-			(p)->alias ? " aliasing" : "",			\
-			IS_USED_CFG(cfg));
-
-	PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
-	PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
-
-	p = &cpuinfo_arc700[c].slc;
-	if (p->line_len)
-		n += scnprintf(buf + n, len - n,
-			       "SLC\t\t: %uK, %uB Line%s\n",
-			       p->sz_k, p->line_len, IS_USED_RUN(slc_enable));
-
-	n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
-		       perip_base,
-		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency (per-device) "));
-
-	return buf;
-}
-
-/*
- * Read the Cache Build Confuration Registers, Decode them and save into
- * the cpuinfo structure for later use.
- * No Validation done here, simply read/convert the BCRs
- */
-static void read_decode_cache_bcr_arcv2(int cpu)
+static int read_decode_cache_bcr_arcv2(int c, char *buf, int len)
 {
-	struct cpuinfo_arc_cache *p_slc = &cpuinfo_arc700[cpu].slc;
+	struct cpuinfo_arc_cache *p_slc = &slc_info;
+	struct bcr_identity ident;
 	struct bcr_generic sbcr;
-
-	struct bcr_slc_cfg {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int pad:24, way:2, lsz:2, sz:4;
-#else
-		unsigned int sz:4, lsz:2, way:2, pad:24;
-#endif
-	} slc_cfg;
-
-	struct bcr_clust_cfg {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8;
-#else
-		unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7;
-#endif
-	} cbcr;
-
-	struct bcr_volatile {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int start:4, limit:4, pad:22, order:1, disable:1;
-#else
-		unsigned int disable:1, order:1, pad:22, limit:4, start:4;
-#endif
-	} vol;
-
+	struct bcr_clust_cfg cbcr;
+	struct bcr_volatile vol;
+	int n = 0;
 
 	READ_BCR(ARC_REG_SLC_BCR, sbcr);
 	if (sbcr.ver) {
+		struct bcr_slc_cfg  slc_cfg;
 		READ_BCR(ARC_REG_SLC_CFG, slc_cfg);
 		p_slc->sz_k = 128 << slc_cfg.sz;
 		l2_line_sz = p_slc->line_len = (slc_cfg.lsz == 0) ? 128 : 64;
+		n += scnprintf(buf + n, len - n,
+			       "SLC\t\t: %uK, %uB Line%s\n",
+			       p_slc->sz_k, p_slc->line_len, IS_USED_RUN(slc_enable));
 	}
 
 	READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
@@ -129,70 +79,82 @@ static void read_decode_cache_bcr_arcv2(int cpu)
 		ioc_enable = 0;
 	}
 
+	READ_BCR(AUX_IDENTITY, ident);
+
 	/* HS 2.0 didn't have AUX_VOL */
-	if (cpuinfo_arc700[cpu].core.family > 0x51) {
+	if (ident.family > 0x51) {
 		READ_BCR(AUX_VOL, vol);
 		perip_base = vol.start << 28;
 		/* HS 3.0 has limit and strict-ordering fields */
-		if (cpuinfo_arc700[cpu].core.family > 0x52)
+		if (ident.family > 0x52)
 			perip_end = (vol.limit << 28) - 1;
 	}
+
+	n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n",
+		       perip_base,
+		       IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency (per-device) "));
+
+	return n;
 }
 
-void read_decode_cache_bcr(void)
+int arc_cache_mumbojumbo(int c, char *buf, int len)
 {
-	struct cpuinfo_arc_cache *p_ic, *p_dc;
-	unsigned int cpu = smp_processor_id();
-	struct bcr_cache {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
-#else
-		unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
-#endif
-	} ibcr, dbcr;
+	struct cpuinfo_arc_cache *p_ic = &ic_info, *p_dc = &dc_info;
+	struct bcr_cache ibcr, dbcr;
+	int vipt, assoc;
+	int n = 0;
 
-	p_ic = &cpuinfo_arc700[cpu].icache;
 	READ_BCR(ARC_REG_IC_BCR, ibcr);
-
 	if (!ibcr.ver)
 		goto dc_chk;
 
-	if (ibcr.ver <= 3) {
+	if (is_isa_arcompact() && (ibcr.ver <= 3)) {
 		BUG_ON(ibcr.config != 3);
-		p_ic->assoc = 2;		/* Fixed to 2w set assoc */
-	} else if (ibcr.ver >= 4) {
-		p_ic->assoc = 1 << ibcr.config;	/* 1,2,4,8 */
+		assoc = 2;		/* Fixed to 2w set assoc */
+	} else if (is_isa_arcv2() && (ibcr.ver >= 4)) {
+		assoc = 1 << ibcr.config;	/* 1,2,4,8 */
 	}
 
 	p_ic->line_len = 8 << ibcr.line_len;
 	p_ic->sz_k = 1 << (ibcr.sz - 1);
-	p_ic->vipt = 1;
-	p_ic->alias = p_ic->sz_k/p_ic->assoc/TO_KB(PAGE_SIZE) > 1;
+	p_ic->colors = p_ic->sz_k/assoc/TO_KB(PAGE_SIZE);
+
+	n += scnprintf(buf + n, len - n,
+			"I-Cache\t\t: %uK, %dway/set, %uB Line, VIPT%s%s\n",
+			p_ic->sz_k, assoc, p_ic->line_len,
+			p_ic->colors > 1 ? " aliasing" : "",
+			IS_USED_CFG(CONFIG_ARC_HAS_ICACHE));
 
 dc_chk:
-	p_dc = &cpuinfo_arc700[cpu].dcache;
 	READ_BCR(ARC_REG_DC_BCR, dbcr);
-
 	if (!dbcr.ver)
 		goto slc_chk;
 
-	if (dbcr.ver <= 3) {
+	if (is_isa_arcompact() && (dbcr.ver <= 3)) {
 		BUG_ON(dbcr.config != 2);
-		p_dc->assoc = 4;		/* Fixed to 4w set assoc */
-		p_dc->vipt = 1;
-		p_dc->alias = p_dc->sz_k/p_dc->assoc/TO_KB(PAGE_SIZE) > 1;
-	} else if (dbcr.ver >= 4) {
-		p_dc->assoc = 1 << dbcr.config;	/* 1,2,4,8 */
-		p_dc->vipt = 0;
-		p_dc->alias = 0;		/* PIPT so can't VIPT alias */
+		vipt = 1;
+		assoc = 4;		/* Fixed to 4w set assoc */
+		p_dc->colors = p_dc->sz_k/assoc/TO_KB(PAGE_SIZE);
+	} else if (is_isa_arcv2() && (dbcr.ver >= 4)) {
+		vipt = 0;
+		assoc = 1 << dbcr.config;	/* 1,2,4,8 */
+		p_dc->colors = 1;		/* PIPT so can't VIPT alias */
 	}
 
 	p_dc->line_len = 16 << dbcr.line_len;
 	p_dc->sz_k = 1 << (dbcr.sz - 1);
 
+	n += scnprintf(buf + n, len - n,
+			"D-Cache\t\t: %uK, %dway/set, %uB Line, %s%s\n",
+			p_dc->sz_k, assoc, p_dc->line_len,
+			vipt ? "VIPT" : "PIPT",
+			IS_USED_CFG(CONFIG_ARC_HAS_DCACHE));
+
 slc_chk:
 	if (is_isa_arcv2())
-                read_decode_cache_bcr_arcv2(cpu);
+		n += read_decode_cache_bcr_arcv2(c, buf + n, len - n);
+
+	return n;
 }
 
 /*
@@ -205,93 +167,24 @@ slc_chk:
 #define OP_INV_IC	0x4
 
 /*
- *		I-Cache Aliasing in ARC700 VIPT caches (MMU v1-v3)
- *
- * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag.
- * The orig Cache Management Module "CDU" only required paddr to invalidate a
- * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry.
- * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching
- * the exact same line.
+ * Cache Flush programming model
  *
- * However for larger Caches (way-size > page-size) - i.e. in Aliasing config,
- * paddr alone could not be used to correctly index the cache.
+ * ARC700 MMUv3 I$ and D$ are both VIPT and can potentially alias.
+ * Programming model requires both paddr and vaddr irrespecive of aliasing
+ * considerations:
+ *  - vaddr in {I,D}C_IV?L
+ *  - paddr in {I,D}C_PTAG
  *
- * ------------------
- * MMU v1/v2 (Fixed Page Size 8k)
- * ------------------
- * The solution was to provide CDU with these additonal vaddr bits. These
- * would be bits [x:13], x would depend on cache-geometry, 13 comes from
- * standard page size of 8k.
- * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits
- * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the
- * orig 5 bits of paddr were anyways ignored by CDU line ops, as they
- * represent the offset within cache-line. The adv of using this "clumsy"
- * interface for additional info was no new reg was needed in CDU programming
- * model.
+ * In HS38x (MMUv4), D$ is PIPT, I$ is VIPT and can still alias.
+ * Programming model is different for aliasing vs. non-aliasing I$
+ *  - D$ / Non-aliasing I$: only paddr in {I,D}C_IV?L
+ *  - Aliasing I$: same as ARC700 above (so MMUv3 routine used for MMUv4 I$)
  *
- * 17:13 represented the max num of bits passable, actual bits needed were
- * fewer, based on the num-of-aliases possible.
- * -for 2 alias possibility, only bit 13 needed (32K cache)
- * -for 4 alias possibility, bits 14:13 needed (64K cache)
- *
- * ------------------
- * MMU v3
- * ------------------
- * This ver of MMU supports variable page sizes (1k-16k): although Linux will
- * only support 8k (default), 16k and 4k.
- * However from hardware perspective, smaller page sizes aggravate aliasing
- * meaning more vaddr bits needed to disambiguate the cache-line-op ;
- * the existing scheme of piggybacking won't work for certain configurations.
- * Two new registers IC_PTAG and DC_PTAG inttoduced.
- * "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs
+ *  - If PAE40 is enabled, independent of aliasing considerations, the higher
+ *    bits needs to be written into PTAG_HI
  */
 
 static inline
-void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr,
-			  unsigned long sz, const int op, const int full_page)
-{
-	unsigned int aux_cmd;
-	int num_lines;
-
-	if (op == OP_INV_IC) {
-		aux_cmd = ARC_REG_IC_IVIL;
-	} else {
-		/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
-		aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
-	}
-
-	/* Ensure we properly floor/ceil the non-line aligned/sized requests
-	 * and have @paddr - aligned to cache line and integral @num_lines.
-	 * This however can be avoided for page sized since:
-	 *  -@paddr will be cache-line aligned already (being page aligned)
-	 *  -@sz will be integral multiple of line size (being page sized).
-	 */
-	if (!full_page) {
-		sz += paddr & ~CACHE_LINE_MASK;
-		paddr &= CACHE_LINE_MASK;
-		vaddr &= CACHE_LINE_MASK;
-	}
-
-	num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
-
-	/* MMUv2 and before: paddr contains stuffed vaddrs bits */
-	paddr |= (vaddr >> PAGE_SHIFT) & 0x1F;
-
-	while (num_lines-- > 0) {
-		write_aux_reg(aux_cmd, paddr);
-		paddr += L1_CACHE_BYTES;
-	}
-}
-
-/*
- * For ARC700 MMUv3 I-cache and D-cache flushes
- *  - ARC700 programming model requires paddr and vaddr be passed in seperate
- *    AUX registers (*_IV*L and *_PTAG respectively) irrespective of whether the
- *    caches actually alias or not.
- * -  For HS38, only the aliasing I-cache configuration uses the PTAG reg
- *    (non aliasing I-cache version doesn't; while D-cache can't possibly alias)
- */
-static inline
 void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
 			  unsigned long sz, const int op, const int full_page)
 {
@@ -350,17 +243,6 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
 #ifndef USE_RGN_FLSH
 
 /*
- * In HS38x (MMU v4), I-cache is VIPT (can alias), D-cache is PIPT
- * Here's how cache ops are implemented
- *
- *  - D-cache: only paddr needed (in DC_IVDL/DC_FLDL)
- *  - I-cache Non Aliasing: Despite VIPT, only paddr needed (in IC_IVIL)
- *  - I-cache Aliasing: Both vaddr and paddr needed (in IC_IVIL, IC_PTAG
- *    respectively, similar to MMU v3 programming model, hence
- *    __cache_line_loop_v3() is used)
- *
- * If PAE40 is enabled, independent of aliasing considerations, the higher bits
- * needs to be written into PTAG_HI
  */
 static inline
 void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
@@ -460,11 +342,9 @@ void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
 
 #endif
 
-#if (CONFIG_ARC_MMU_VER < 3)
-#define __cache_line_loop	__cache_line_loop_v2
-#elif (CONFIG_ARC_MMU_VER == 3)
+#ifdef CONFIG_ARC_MMU_V3
 #define __cache_line_loop	__cache_line_loop_v3
-#elif (CONFIG_ARC_MMU_VER > 3)
+#else
 #define __cache_line_loop	__cache_line_loop_v4
 #endif
 
@@ -483,7 +363,7 @@ static inline void __before_dc_op(const int op)
 {
 	if (op == OP_FLUSH_N_INV) {
 		/* Dcache provides 2 cmd: FLUSH or INV
-		 * INV inturn has sub-modes: DISCARD or FLUSH-BEFORE
+		 * INV in turn has sub-modes: DISCARD or FLUSH-BEFORE
 		 * flush-n-inv is achieved by INV cmd but with IM=1
 		 * So toggle INV sub-mode depending on op request and default
 		 */
@@ -663,7 +543,7 @@ static void __ic_line_inv_vaddr(phys_addr_t paddr, unsigned long vaddr,
 
 #endif /* CONFIG_ARC_HAS_ICACHE */
 
-noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op)
+static noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op)
 {
 #ifdef CONFIG_ISA_ARCV2
 	/*
@@ -726,7 +606,7 @@ noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op)
 #endif
 }
 
-noinline void slc_op_line(phys_addr_t paddr, unsigned long sz, const int op)
+static __maybe_unused noinline void slc_op_line(phys_addr_t paddr, unsigned long sz, const int op)
 {
 #ifdef CONFIG_ISA_ARCV2
 	/*
@@ -822,47 +702,16 @@ static inline void arc_slc_enable(void)
  * Exported APIs
  */
 
-/*
- * Handle cache congruency of kernel and userspace mappings of page when kernel
- * writes-to/reads-from
- *
- * The idea is to defer flushing of kernel mapping after a WRITE, possible if:
- *  -dcache is NOT aliasing, hence any U/K-mappings of page are congruent
- *  -U-mapping doesn't exist yet for page (finalised in update_mmu_cache)
- *  -In SMP, if hardware caches are coherent
- *
- * There's a corollary case, where kernel READs from a userspace mapped page.
- * If the U-mapping is not congruent to to K-mapping, former needs flushing.
- */
-void flush_dcache_page(struct page *page)
+void flush_dcache_folio(struct folio *folio)
 {
-	struct address_space *mapping;
-
-	if (!cache_is_vipt_aliasing()) {
-		clear_bit(PG_dc_clean, &page->flags);
-		return;
-	}
-
-	/* don't handle anon pages here */
-	mapping = page_mapping_file(page);
-	if (!mapping)
-		return;
-
-	/*
-	 * pagecache page, file not yet mapped to userspace
-	 * Make a note that K-mapping is dirty
-	 */
-	if (!mapping_mapped(mapping)) {
-		clear_bit(PG_dc_clean, &page->flags);
-	} else if (page_mapcount(page)) {
-
-		/* kernel reading from page with U-mapping */
-		phys_addr_t paddr = (unsigned long)page_address(page);
-		unsigned long vaddr = page->index << PAGE_SHIFT;
+	clear_bit(PG_dc_clean, &folio->flags.f);
+	return;
+}
+EXPORT_SYMBOL(flush_dcache_folio);
 
-		if (addr_not_cache_congruent(paddr, vaddr))
-			__flush_dcache_page(paddr, vaddr);
-	}
+void flush_dcache_page(struct page *page)
+{
+	return flush_dcache_folio(page_folio(page));
 }
 EXPORT_SYMBOL(flush_dcache_page);
 
@@ -992,7 +841,7 @@ EXPORT_SYMBOL(flush_icache_range);
  * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
  *    However in one instance, when called by kprobe (for a breakpt in
  *    builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
- *    use a paddr to index the cache (despite VIPT). This is fine since since a
+ *    use a paddr to index the cache (despite VIPT). This is fine since a
  *    builtin kernel page will not have any virtual mappings.
  *    kprobe on loadable module will be kernel vaddr.
  */
@@ -1003,18 +852,18 @@ void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len)
 }
 
 /* wrapper to compile time eliminate alignment checks in flush loop */
-void __inv_icache_page(phys_addr_t paddr, unsigned long vaddr)
+void __inv_icache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr)
 {
-	__ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE);
+	__ic_line_inv_vaddr(paddr, vaddr, nr * PAGE_SIZE);
 }
 
 /*
  * wrapper to clearout kernel or userspace mappings of a page
  * For kernel mappings @vaddr == @paddr
  */
-void __flush_dcache_page(phys_addr_t paddr, unsigned long vaddr)
+void __flush_dcache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr)
 {
-	__dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV);
+	__dc_line_op(paddr, vaddr & PAGE_MASK, nr * PAGE_SIZE, OP_FLUSH_N_INV);
 }
 
 noinline void flush_cache_all(void)
@@ -1030,89 +879,18 @@ noinline void flush_cache_all(void)
 
 }
 
-#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING
-
-void flush_cache_mm(struct mm_struct *mm)
-{
-	flush_cache_all();
-}
-
-void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr,
-		      unsigned long pfn)
-{
-	phys_addr_t paddr = pfn << PAGE_SHIFT;
-
-	u_vaddr &= PAGE_MASK;
-
-	__flush_dcache_page(paddr, u_vaddr);
-
-	if (vma->vm_flags & VM_EXEC)
-		__inv_icache_page(paddr, u_vaddr);
-}
-
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		       unsigned long end)
-{
-	flush_cache_all();
-}
-
-void flush_anon_page(struct vm_area_struct *vma, struct page *page,
-		     unsigned long u_vaddr)
-{
-	/* TBD: do we really need to clear the kernel mapping */
-	__flush_dcache_page((phys_addr_t)page_address(page), u_vaddr);
-	__flush_dcache_page((phys_addr_t)page_address(page),
-			    (phys_addr_t)page_address(page));
-
-}
-
-#endif
-
 void copy_user_highpage(struct page *to, struct page *from,
 	unsigned long u_vaddr, struct vm_area_struct *vma)
 {
+	struct folio *src = page_folio(from);
+	struct folio *dst = page_folio(to);
 	void *kfrom = kmap_atomic(from);
 	void *kto = kmap_atomic(to);
-	int clean_src_k_mappings = 0;
-
-	/*
-	 * If SRC page was already mapped in userspace AND it's U-mapping is
-	 * not congruent with K-mapping, sync former to physical page so that
-	 * K-mapping in memcpy below, sees the right data
-	 *
-	 * Note that while @u_vaddr refers to DST page's userspace vaddr, it is
-	 * equally valid for SRC page as well
-	 *
-	 * For !VIPT cache, all of this gets compiled out as
-	 * addr_not_cache_congruent() is 0
-	 */
-	if (page_mapcount(from) && addr_not_cache_congruent(kfrom, u_vaddr)) {
-		__flush_dcache_page((unsigned long)kfrom, u_vaddr);
-		clean_src_k_mappings = 1;
-	}
 
 	copy_page(kto, kfrom);
 
-	/*
-	 * Mark DST page K-mapping as dirty for a later finalization by
-	 * update_mmu_cache(). Although the finalization could have been done
-	 * here as well (given that both vaddr/paddr are available).
-	 * But update_mmu_cache() already has code to do that for other
-	 * non copied user pages (e.g. read faults which wire in pagecache page
-	 * directly).
-	 */
-	clear_bit(PG_dc_clean, &to->flags);
-
-	/*
-	 * if SRC was already usermapped and non-congruent to kernel mapping
-	 * sync the kernel mapping back to physical page
-	 */
-	if (clean_src_k_mappings) {
-		__flush_dcache_page((unsigned long)kfrom, (unsigned long)kfrom);
-		set_bit(PG_dc_clean, &from->flags);
-	} else {
-		clear_bit(PG_dc_clean, &from->flags);
-	}
+	clear_bit(PG_dc_clean, &dst->flags.f);
+	clear_bit(PG_dc_clean, &src->flags.f);
 
 	kunmap_atomic(kto);
 	kunmap_atomic(kfrom);
@@ -1120,10 +898,11 @@ void copy_user_highpage(struct page *to, struct page *from,
 
 void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
 {
+	struct folio *folio = page_folio(page);
 	clear_page(to);
-	clear_bit(PG_dc_clean, &page->flags);
+	clear_bit(PG_dc_clean, &folio->flags.f);
 }
-
+EXPORT_SYMBOL(clear_user_page);
 
 /**********************************************************************
  * Explicit Cache flush request from user space via syscall
@@ -1151,7 +930,7 @@ SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
  * 3. All Caches need to be disabled when setting up IOC to elide any in-flight
  *    Coherency transactions
  */
-noinline void __init arc_ioc_setup(void)
+static noinline void __init arc_ioc_setup(void)
 {
 	unsigned int ioc_base, mem_sz;
 
@@ -1213,12 +992,10 @@ noinline void __init arc_ioc_setup(void)
  *    one core suffices for all
  *  - IOC setup / dma callbacks only need to be done once
  */
-void __init arc_cache_init_master(void)
+static noinline void __init arc_cache_init_master(void)
 {
-	unsigned int __maybe_unused cpu = smp_processor_id();
-
 	if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
-		struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
+		struct cpuinfo_arc_cache *ic = &ic_info;
 
 		if (!ic->line_len)
 			panic("cache support enabled but non-existent cache\n");
@@ -1231,14 +1008,14 @@ void __init arc_cache_init_master(void)
 		 * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG
 		 * pair to provide vaddr/paddr respectively, just as in MMU v3
 		 */
-		if (is_isa_arcv2() && ic->alias)
+		if (is_isa_arcv2() && ic->colors > 1)
 			_cache_line_loop_ic_fn = __cache_line_loop_v3;
 		else
 			_cache_line_loop_ic_fn = __cache_line_loop;
 	}
 
 	if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) {
-		struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
+		struct cpuinfo_arc_cache *dc = &dc_info;
 
 		if (!dc->line_len)
 			panic("cache support enabled but non-existent cache\n");
@@ -1248,18 +1025,8 @@ void __init arc_cache_init_master(void)
 			      dc->line_len, L1_CACHE_BYTES);
 
 		/* check for D-Cache aliasing on ARCompact: ARCv2 has PIPT */
-		if (is_isa_arcompact()) {
-			int handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
-			int num_colors = dc->sz_k/dc->assoc/TO_KB(PAGE_SIZE);
-
-			if (dc->alias) {
-				if (!handled)
-					panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
-				if (CACHE_COLORS_NUM != num_colors)
-					panic("CACHE_COLORS_NUM not optimized for config\n");
-			} else if (!dc->alias && handled) {
-				panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
-			}
+		if (is_isa_arcompact() && dc->colors > 1) {
+			panic("Aliasing VIPT cache not supported\n");
 		}
 	}
 
@@ -1300,9 +1067,6 @@ void __init arc_cache_init_master(void)
 void __ref arc_cache_init(void)
 {
 	unsigned int __maybe_unused cpu = smp_processor_id();
-	char str[256];
-
-	pr_info("%s", arc_cache_mumbojumbo(0, str, sizeof(str)));
 
 	if (!cpu)
 		arc_cache_init_master();
diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c
index 73a7e88a1e92..6b85e94f3275 100644
--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@@ -3,7 +3,7 @@
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  */
 
-#include <linux/dma-noncoherent.h>
+#include <linux/dma-map-ops.h>
 #include <asm/cache.h>
 #include <asm/cacheflush.h>
 
@@ -32,7 +32,7 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
 
 /*
  * Cache operations depending on function and direction argument, inspired by
- * https://lkml.org/lkml/2018/5/18/979
+ * https://lore.kernel.org/lkml/20180518175004.GF17671@n2100.armlinux.org.uk
  * "dma_sync_*_for_cpu and direction=TO_DEVICE (was Re: [PATCH 02/20]
  * dma-mapping: provide a generic dma-noncoherent implementation)"
  *
@@ -48,8 +48,8 @@ void arch_dma_prep_coherent(struct page *page, size_t size)
  * upper layer functions (in include/linux/dma-mapping.h)
  */
 
-void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
-		size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
 	switch (dir) {
 	case DMA_TO_DEVICE:
@@ -69,8 +69,8 @@ void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
 	}
 }
 
-void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
-		size_t size, enum dma_data_direction dir)
+void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
 {
 	switch (dir) {
 	case DMA_TO_DEVICE:
@@ -90,8 +90,7 @@ void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
 /*
  * Plug in direct dma map ops.
  */
-void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-			const struct iommu_ops *iommu, bool coherent)
+void arch_setup_dma_ops(struct device *dev, bool coherent)
 {
 	/*
 	 * IOC hardware snoops all DMA traffic keeping the caches consistent
diff --git a/arch/arc/mm/extable.c b/arch/arc/mm/extable.c
index b06b09ddf924..88fa3a4d4906 100644
--- a/arch/arc/mm/extable.c
+++ b/arch/arc/mm/extable.c
@@ -22,26 +22,3 @@ int fixup_exception(struct pt_regs *regs)
 
 	return 0;
 }
-
-#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-
-unsigned long arc_clear_user_noinline(void __user *to,
-		unsigned long n)
-{
-	return __arc_clear_user(to, n);
-}
-EXPORT_SYMBOL(arc_clear_user_noinline);
-
-long arc_strncpy_from_user_noinline(char *dst, const char __user *src,
-		long count)
-{
-	return __arc_strncpy_from_user(dst, src, count);
-}
-EXPORT_SYMBOL(arc_strncpy_from_user_noinline);
-
-long arc_strnlen_user_noinline(const char __user *src, long n)
-{
-	return __arc_strnlen_user(src, n);
-}
-EXPORT_SYMBOL(arc_strnlen_user_noinline);
-#endif
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
index 3861543b66a0..95119a5e7761 100644
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@@ -13,7 +13,7 @@
 #include <linux/kdebug.h>
 #include <linux/perf_event.h>
 #include <linux/mm_types.h>
-#include <asm/pgalloc.h>
+#include <asm/entry.h>
 #include <asm/mmu.h>
 
 /*
@@ -30,26 +30,38 @@ noinline static int handle_kernel_vaddr_fault(unsigned long address)
 	 * with the 'reference' page table.
 	 */
 	pgd_t *pgd, *pgd_k;
+	p4d_t *p4d, *p4d_k;
 	pud_t *pud, *pud_k;
 	pmd_t *pmd, *pmd_k;
 
-	pgd = pgd_offset_fast(current->active_mm, address);
+	pgd = pgd_offset(current->active_mm, address);
 	pgd_k = pgd_offset_k(address);
 
-	if (!pgd_present(*pgd_k))
+	if (pgd_none (*pgd_k))
 		goto bad_area;
+	if (!pgd_present(*pgd))
+		set_pgd(pgd, *pgd_k);
 
-	pud = pud_offset(pgd, address);
-	pud_k = pud_offset(pgd_k, address);
-	if (!pud_present(*pud_k))
+	p4d = p4d_offset(pgd, address);
+	p4d_k = p4d_offset(pgd_k, address);
+	if (p4d_none(*p4d_k))
 		goto bad_area;
+	if (!p4d_present(*p4d))
+		set_p4d(p4d, *p4d_k);
+
+	pud = pud_offset(p4d, address);
+	pud_k = pud_offset(p4d_k, address);
+	if (pud_none(*pud_k))
+		goto bad_area;
+	if (!pud_present(*pud))
+		set_pud(pud, *pud_k);
 
 	pmd = pmd_offset(pud, address);
 	pmd_k = pmd_offset(pud_k, address);
-	if (!pmd_present(*pmd_k))
+	if (pmd_none(*pmd_k))
 		goto bad_area;
-
-	set_pmd(pmd, *pmd_k);
+	if (!pmd_present(*pmd))
+		set_pmd(pmd, *pmd_k);
 
 	/* XXX: create the TLB entry here */
 	return 0;
@@ -88,28 +100,23 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	if (faulthandler_disabled() || !mm)
 		goto no_context;
 
-	if (regs->ecr_cause & ECR_C_PROTV_STORE)	/* ST/EX */
+	if (regs->ecr.cause & ECR_C_PROTV_STORE)	/* ST/EX */
 		write = 1;
-	else if ((regs->ecr_vec == ECR_V_PROTV) &&
-	         (regs->ecr_cause == ECR_C_PROTV_INST_FETCH))
+	else if ((regs->ecr.vec == ECR_V_PROTV) &&
+	         (regs->ecr.cause == ECR_C_PROTV_INST_FETCH))
 		exec = 1;
 
-	flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
+	flags = FAULT_FLAG_DEFAULT;
 	if (user_mode(regs))
 		flags |= FAULT_FLAG_USER;
 	if (write)
 		flags |= FAULT_FLAG_WRITE;
 
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
 retry:
-	down_read(&mm->mmap_sem);
-
-	vma = find_vma(mm, address);
+	vma = lock_mm_and_find_vma(mm, address, regs);
 	if (!vma)
-		goto bad_area;
-	if (unlikely(address < vma->vm_start)) {
-		if (!(vma->vm_flags & VM_GROWSDOWN) || expand_stack(vma, address))
-			goto bad_area;
-	}
+		goto bad_area_nosemaphore;
 
 	/*
 	 * vm_area is good, now check permissions for this memory access
@@ -125,56 +132,38 @@ retry:
 		goto bad_area;
 	}
 
-	fault = handle_mm_fault(vma, address, flags);
+	fault = handle_mm_fault(vma, address, flags, regs);
+
+	/* Quick path to respond to signals */
+	if (fault_signal_pending(fault, regs)) {
+		if (!user_mode(regs))
+			goto no_context;
+		return;
+	}
+
+	/* The fault is fully completed (including releasing mmap lock) */
+	if (fault & VM_FAULT_COMPLETED)
+		return;
 
 	/*
-	 * Fault retry nuances
+	 * Fault retry nuances, mmap_lock already relinquished by core mm
 	 */
 	if (unlikely(fault & VM_FAULT_RETRY)) {
-
-		/*
-		 * If fault needs to be retried, handle any pending signals
-		 * first (by returning to user mode).
-		 * mmap_sem already relinquished by core mm for RETRY case
-		 */
-		if (fatal_signal_pending(current)) {
-			if (!user_mode(regs))
-				goto no_context;
-			return;
-		}
-		/*
-		 * retry state machine
-		 */
-		if (flags & FAULT_FLAG_ALLOW_RETRY) {
-			flags &= ~FAULT_FLAG_ALLOW_RETRY;
-			flags |= FAULT_FLAG_TRIED;
-			goto retry;
-		}
+		flags |= FAULT_FLAG_TRIED;
+		goto retry;
 	}
 
 bad_area:
-	up_read(&mm->mmap_sem);
+	mmap_read_unlock(mm);
 
+bad_area_nosemaphore:
 	/*
 	 * Major/minor page fault accounting
 	 * (in case of retry we only land here once)
 	 */
-	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
-
-	if (likely(!(fault & VM_FAULT_ERROR))) {
-		if (fault & VM_FAULT_MAJOR) {
-			tsk->maj_flt++;
-			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,
-				      regs, address);
-		} else {
-			tsk->min_flt++;
-			perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1,
-				      regs, address);
-		}
-
+	if (likely(!(fault & VM_FAULT_ERROR)))
 		/* Normal return path: fault Handled Gracefully */
 		return;
-	}
 
 	if (!user_mode(regs))
 		goto no_context;
diff --git a/arch/arc/mm/highmem.c b/arch/arc/mm/highmem.c
index a4856bfaedf3..c79912a6b196 100644
--- a/arch/arc/mm/highmem.c
+++ b/arch/arc/mm/highmem.c
@@ -6,8 +6,8 @@
 #include <linux/memblock.h>
 #include <linux/export.h>
 #include <linux/highmem.h>
+#include <linux/pgtable.h>
 #include <asm/processor.h>
-#include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 
@@ -36,9 +36,8 @@
  *   This means each only has 1 PGDIR_SIZE worth of kvaddr mappings, which means
  *   2M of kvaddr space for typical config (8K page and 11:8:13 traversal split)
  *
- * - fixmap anyhow needs a limited number of mappings. So 2M kvaddr == 256 PTE
- *   slots across NR_CPUS would be more than sufficient (generic code defines
- *   KM_TYPE_NR as 20).
+ * - The fixed KMAP slots for kmap_local/atomic() require KM_MAX_IDX slots per
+ *   CPU. So the number of CPUs sharing a single PTE page is limited.
  *
  * - pkmap being preemptible, in theory could do with more than 256 concurrent
  *   mappings. However, generic pkmap code: map_new_virtual(), doesn't traverse
@@ -47,78 +46,12 @@
  */
 
 extern pte_t * pkmap_page_table;
-static pte_t * fixmap_page_table;
-
-void *kmap(struct page *page)
-{
-	BUG_ON(in_interrupt());
-	if (!PageHighMem(page))
-		return page_address(page);
-
-	return kmap_high(page);
-}
-EXPORT_SYMBOL(kmap);
-
-void *kmap_atomic(struct page *page)
-{
-	int idx, cpu_idx;
-	unsigned long vaddr;
-
-	preempt_disable();
-	pagefault_disable();
-	if (!PageHighMem(page))
-		return page_address(page);
-
-	cpu_idx = kmap_atomic_idx_push();
-	idx = cpu_idx + KM_TYPE_NR * smp_processor_id();
-	vaddr = FIXMAP_ADDR(idx);
-
-	set_pte_at(&init_mm, vaddr, fixmap_page_table + idx,
-		   mk_pte(page, kmap_prot));
-
-	return (void *)vaddr;
-}
-EXPORT_SYMBOL(kmap_atomic);
-
-void __kunmap_atomic(void *kv)
-{
-	unsigned long kvaddr = (unsigned long)kv;
-
-	if (kvaddr >= FIXMAP_BASE && kvaddr < (FIXMAP_BASE + FIXMAP_SIZE)) {
-
-		/*
-		 * Because preemption is disabled, this vaddr can be associated
-		 * with the current allocated index.
-		 * But in case of multiple live kmap_atomic(), it still relies on
-		 * callers to unmap in right order.
-		 */
-		int cpu_idx = kmap_atomic_idx();
-		int idx = cpu_idx + KM_TYPE_NR * smp_processor_id();
-
-		WARN_ON(kvaddr != FIXMAP_ADDR(idx));
-
-		pte_clear(&init_mm, kvaddr, fixmap_page_table + idx);
-		local_flush_tlb_kernel_range(kvaddr, kvaddr + PAGE_SIZE);
-
-		kmap_atomic_idx_pop();
-	}
-
-	pagefault_enable();
-	preempt_enable();
-}
-EXPORT_SYMBOL(__kunmap_atomic);
 
 static noinline pte_t * __init alloc_kmap_pgtable(unsigned long kvaddr)
 {
-	pgd_t *pgd_k;
-	pud_t *pud_k;
-	pmd_t *pmd_k;
+	pmd_t *pmd_k = pmd_off_k(kvaddr);
 	pte_t *pte_k;
 
-	pgd_k = pgd_offset_k(kvaddr);
-	pud_k = pud_offset(pgd_k, kvaddr);
-	pmd_k = pmd_offset(pud_k, kvaddr);
-
 	pte_k = (pte_t *)memblock_alloc_low(PAGE_SIZE, PAGE_SIZE);
 	if (!pte_k)
 		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
@@ -132,10 +65,9 @@ void __init kmap_init(void)
 {
 	/* Due to recursive include hell, we can't do this in processor.h */
 	BUILD_BUG_ON(PAGE_OFFSET < (VMALLOC_END + FIXMAP_SIZE + PKMAP_SIZE));
+	BUILD_BUG_ON(LAST_PKMAP > PTRS_PER_PTE);
+	BUILD_BUG_ON(FIX_KMAP_SLOTS > PTRS_PER_PTE);
 
-	BUILD_BUG_ON(KM_TYPE_NR > PTRS_PER_PTE);
 	pkmap_page_table = alloc_kmap_pgtable(PKMAP_BASE);
-
-	BUILD_BUG_ON(LAST_PKMAP > PTRS_PER_PTE);
-	fixmap_page_table = alloc_kmap_pgtable(FIXMAP_BASE);
+	alloc_kmap_pgtable(FIXMAP_BASE);
 }
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index 0920c969c466..a73cc94f806e 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -14,8 +14,8 @@
 #include <linux/module.h>
 #include <linux/highmem.h>
 #include <asm/page.h>
-#include <asm/pgalloc.h>
 #include <asm/sections.h>
+#include <asm/setup.h>
 #include <asm/arcregs.h>
 
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
@@ -27,13 +27,10 @@ static unsigned long low_mem_sz;
 
 #ifdef CONFIG_HIGHMEM
 static unsigned long min_high_pfn, max_high_pfn;
-static u64 high_mem_start;
-static u64 high_mem_sz;
-#endif
-
-#ifdef CONFIG_DISCONTIGMEM
-struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
-EXPORT_SYMBOL(node_data);
+static phys_addr_t high_mem_start;
+static phys_addr_t high_mem_sz;
+unsigned long arch_pfn_offset;
+EXPORT_SYMBOL(arch_pfn_offset);
 #endif
 
 long __init arc_get_mem_sz(void)
@@ -63,11 +60,14 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 
 		low_mem_sz = size;
 		in_use = 1;
+		memblock_add_node(base, size, 0, MEMBLOCK_NONE);
 	} else {
 #ifdef CONFIG_HIGHMEM
 		high_mem_start = base;
 		high_mem_sz = size;
 		in_use = 1;
+		memblock_add_node(base, size, 1, MEMBLOCK_NONE);
+		memblock_reserve(base, size);
 #endif
 	}
 
@@ -83,25 +83,16 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
  */
 void __init setup_arch_memory(void)
 {
-	unsigned long zones_size[MAX_NR_ZONES];
-	unsigned long zones_holes[MAX_NR_ZONES];
+	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
 
-	init_mm.start_code = (unsigned long)_text;
-	init_mm.end_code = (unsigned long)_etext;
-	init_mm.end_data = (unsigned long)_edata;
-	init_mm.brk = (unsigned long)_end;
+	setup_initial_init_mm(_text, _etext, _edata, _end);
 
 	/* first page of system - kernel .vector starts here */
-	min_low_pfn = ARCH_PFN_OFFSET;
+	min_low_pfn = virt_to_pfn((void *)CONFIG_LINUX_RAM_BASE);
 
 	/* Last usable page of low mem */
 	max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
 
-#ifdef CONFIG_FLATMEM
-	/* pfn_valid() uses this */
-	max_mapnr = max_low_pfn - min_low_pfn;
-#endif
-
 	/*------------- bootmem allocator setup -----------------------*/
 
 	/*
@@ -115,7 +106,6 @@ void __init setup_arch_memory(void)
 	 * the crash
 	 */
 
-	memblock_add_node(low_mem_start, low_mem_sz, 0);
 	memblock_reserve(CONFIG_LINUX_LINK_BASE,
 			 __pa(_end) - CONFIG_LINUX_LINK_BASE);
 
@@ -133,73 +123,57 @@ void __init setup_arch_memory(void)
 	memblock_dump_all();
 
 	/*----------------- node/zones setup --------------------------*/
-	memset(zones_size, 0, sizeof(zones_size));
-	memset(zones_holes, 0, sizeof(zones_holes));
-
-	zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
-	zones_holes[ZONE_NORMAL] = 0;
-
-	/*
-	 * We can't use the helper free_area_init(zones[]) because it uses
-	 * PAGE_OFFSET to compute the @min_low_pfn which would be wrong
-	 * when our kernel doesn't start at PAGE_OFFSET, i.e.
-	 * PAGE_OFFSET != CONFIG_LINUX_RAM_BASE
-	 */
-	free_area_init_node(0,			/* node-id */
-			    zones_size,		/* num pages per zone */
-			    min_low_pfn,	/* first pfn of node */
-			    zones_holes);	/* holes */
+	max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
 
 #ifdef CONFIG_HIGHMEM
 	/*
-	 * Populate a new node with highmem
-	 *
 	 * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
-	 * than addresses in normal ala low memory (0x8000_0000 based).
+	 * than addresses in normal aka low memory (0x8000_0000 based).
 	 * Even with PAE, the huge peripheral space hole would waste a lot of
-	 * mem with single mem_map[]. This warrants a mem_map per region design.
-	 * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
-	 *
-	 * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
-	 * populated with normal memory zone while node 1 only has highmem
+	 * mem with single contiguous mem_map[].
+	 * Thus when HIGHMEM on ARC is enabled the memory map corresponding
+	 * to the hole is freed and ARC specific version of pfn_valid()
+	 * handles the hole in the memory map.
 	 */
-	node_set_online(1);
 
 	min_high_pfn = PFN_DOWN(high_mem_start);
 	max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
 
-	zones_size[ZONE_NORMAL] = 0;
-	zones_holes[ZONE_NORMAL] = 0;
-
-	zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
-	zones_holes[ZONE_HIGHMEM] = 0;
-
-	free_area_init_node(1,			/* node-id */
-			    zones_size,		/* num pages per zone */
-			    min_high_pfn,	/* first pfn of node */
-			    zones_holes);	/* holes */
+	/*
+	 * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE.
+	 * For HIGHMEM without PAE max_high_pfn should be less than
+	 * min_low_pfn to guarantee that these two regions don't overlap.
+	 * For PAE case highmem is greater than lowmem, so it is natural
+	 * to use max_high_pfn.
+	 *
+	 * In both cases, holes should be handled by pfn_valid().
+	 */
+	max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
 
-	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
+	arch_pfn_offset = min(min_low_pfn, min_high_pfn);
 	kmap_init();
-#endif
+#endif /* CONFIG_HIGHMEM */
+
+	free_area_init(max_zone_pfn);
 }
 
-/*
- * mem_init - initializes memory
- *
- * Frees up bootmem
- * Calculates and displays memory available/used
- */
-void __init mem_init(void)
+void __init arch_mm_preinit(void)
 {
 #ifdef CONFIG_HIGHMEM
-	unsigned long tmp;
-
-	reset_all_zones_managed_pages();
-	for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
-		free_highmem_page(pfn_to_page(tmp));
+	memblock_phys_free(high_mem_start, high_mem_sz);
 #endif
 
-	memblock_free_all();
-	mem_init_print_info(NULL);
+	BUILD_BUG_ON((PTRS_PER_PGD * sizeof(pgd_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PUD * sizeof(pud_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PMD * sizeof(pmd_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PTE * sizeof(pte_t)) > PAGE_SIZE);
+}
+
+#ifdef CONFIG_HIGHMEM
+int pfn_valid(unsigned long pfn)
+{
+	return (pfn >= min_high_pfn && pfn <= max_high_pfn) ||
+		(pfn >= min_low_pfn && pfn <= max_low_pfn);
 }
+EXPORT_SYMBOL(pfn_valid);
+#endif
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index fac4adc90204..fd8897a0e52c 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -8,7 +8,6 @@
 #include <linux/module.h>
 #include <linux/io.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/cache.h>
 
 static inline bool arc_uncached_addr_space(phys_addr_t paddr)
@@ -25,13 +24,6 @@ static inline bool arc_uncached_addr_space(phys_addr_t paddr)
 
 void __iomem *ioremap(phys_addr_t paddr, unsigned long size)
 {
-	phys_addr_t end;
-
-	/* Don't allow wraparound or zero size */
-	end = paddr + size - 1;
-	if (!size || (end < paddr))
-		return NULL;
-
 	/*
 	 * If the region is h/w uncached, MMU mapping can be elided as optim
 	 * The cast to u32 is fine as this region can only be inside 4GB
@@ -39,7 +31,8 @@ void __iomem *ioremap(phys_addr_t paddr, unsigned long size)
 	if (arc_uncached_addr_space(paddr))
 		return (void __iomem *)(u32)paddr;
 
-	return ioremap_prot(paddr, size, PAGE_KERNEL_NO_CACHE);
+	return ioremap_prot(paddr, size,
+			    pgprot_noncached(PAGE_KERNEL));
 }
 EXPORT_SYMBOL(ioremap);
 
@@ -50,54 +43,20 @@ EXPORT_SYMBOL(ioremap);
  * ARC hardware uncached region, this one still goes thru the MMU as caller
  * might need finer access control (R/W/X)
  */
-void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
-			   unsigned long flags)
+void __iomem *ioremap_prot(phys_addr_t paddr, size_t size,
+			   pgprot_t prot)
 {
-	unsigned long vaddr;
-	struct vm_struct *area;
-	phys_addr_t off, end;
-	pgprot_t prot = __pgprot(flags);
-
-	/* Don't allow wraparound, zero size */
-	end = paddr + size - 1;
-	if ((!size) || (end < paddr))
-		return NULL;
-
-	/* An early platform driver might end up here */
-	if (!slab_is_available())
-		return NULL;
-
 	/* force uncached */
-	prot = pgprot_noncached(prot);
-
-	/* Mappings have to be page-aligned */
-	off = paddr & ~PAGE_MASK;
-	paddr &= PAGE_MASK;
-	size = PAGE_ALIGN(end + 1) - paddr;
-
-	/*
-	 * Ok, go for it..
-	 */
-	area = get_vm_area(size, VM_IOREMAP);
-	if (!area)
-		return NULL;
-	area->phys_addr = paddr;
-	vaddr = (unsigned long)area->addr;
-	if (ioremap_page_range(vaddr, vaddr + size, paddr, prot)) {
-		vunmap((void __force *)vaddr);
-		return NULL;
-	}
-	return (void __iomem *)(off + (char __iomem *)vaddr);
+	return generic_ioremap_prot(paddr, size, pgprot_noncached(prot));
 }
 EXPORT_SYMBOL(ioremap_prot);
 
-
-void iounmap(const void __iomem *addr)
+void iounmap(volatile void __iomem *addr)
 {
 	/* weird double cast to handle phys_addr_t > 32 bits */
 	if (arc_uncached_addr_space((phys_addr_t)(u32)addr))
 		return;
 
-	vfree((void *)(PAGE_MASK & (unsigned long __force)addr));
+	generic_iounmap(addr);
 }
 EXPORT_SYMBOL(iounmap);
diff --git a/arch/arc/mm/mmap.c b/arch/arc/mm/mmap.c
index 722d26b94307..2185afe8d59f 100644
--- a/arch/arc/mm/mmap.c
+++ b/arch/arc/mm/mmap.c
@@ -14,10 +14,6 @@
 
 #include <asm/cacheflush.h>
 
-#define COLOUR_ALIGN(addr, pgoff)			\
-	((((addr) + SHMLBA - 1) & ~(SHMLBA - 1)) +	\
-	 (((pgoff) << PAGE_SHIFT) & (SHMLBA - 1)))
-
 /*
  * Ensure that shared mappings are correctly aligned to
  * avoid aliasing issues with VIPT caches.
@@ -27,25 +23,18 @@
  */
 unsigned long
 arch_get_unmapped_area(struct file *filp, unsigned long addr,
-		unsigned long len, unsigned long pgoff, unsigned long flags)
+		unsigned long len, unsigned long pgoff,
+		unsigned long flags, vm_flags_t vm_flags)
 {
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
-	int do_align = 0;
-	int aliasing = cache_is_vipt_aliasing();
-	struct vm_unmapped_area_info info;
-
-	/*
-	 * We only need to do colour alignment if D cache aliases.
-	 */
-	if (aliasing)
-		do_align = filp || (flags & MAP_SHARED);
+	struct vm_unmapped_area_info info = {};
 
 	/*
 	 * We enforce the MAP_FIXED case.
 	 */
 	if (flags & MAP_FIXED) {
-		if (aliasing && flags & MAP_SHARED &&
+		if (flags & MAP_SHARED &&
 		    (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
 			return -EINVAL;
 		return addr;
@@ -55,10 +44,7 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		return -ENOMEM;
 
 	if (addr) {
-		if (do_align)
-			addr = COLOUR_ALIGN(addr, pgoff);
-		else
-			addr = PAGE_ALIGN(addr);
+		addr = PAGE_ALIGN(addr);
 
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
@@ -66,11 +52,29 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 			return addr;
 	}
 
-	info.flags = 0;
 	info.length = len;
 	info.low_limit = mm->mmap_base;
 	info.high_limit = TASK_SIZE;
-	info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0;
 	info.align_offset = pgoff << PAGE_SHIFT;
 	return vm_unmapped_area(&info);
 }
+
+static const pgprot_t protection_map[16] = {
+	[VM_NONE]					= PAGE_U_NONE,
+	[VM_READ]					= PAGE_U_R,
+	[VM_WRITE]					= PAGE_U_R,
+	[VM_WRITE | VM_READ]				= PAGE_U_R,
+	[VM_EXEC]					= PAGE_U_X_R,
+	[VM_EXEC | VM_READ]				= PAGE_U_X_R,
+	[VM_EXEC | VM_WRITE]				= PAGE_U_X_R,
+	[VM_EXEC | VM_WRITE | VM_READ]			= PAGE_U_X_R,
+	[VM_SHARED]					= PAGE_U_NONE,
+	[VM_SHARED | VM_READ]				= PAGE_U_R,
+	[VM_SHARED | VM_WRITE]				= PAGE_U_W_R,
+	[VM_SHARED | VM_WRITE | VM_READ]		= PAGE_U_W_R,
+	[VM_SHARED | VM_EXEC]				= PAGE_U_X_R,
+	[VM_SHARED | VM_EXEC | VM_READ]			= PAGE_U_X_R,
+	[VM_SHARED | VM_EXEC | VM_WRITE]		= PAGE_U_X_W_R,
+	[VM_SHARED | VM_EXEC | VM_WRITE | VM_READ]	= PAGE_U_X_W_R
+};
+DECLARE_VM_GET_PAGE_PROT
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 10025e199353..ed6915ba76ec 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -1,51 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * TLB Management (flush/create/diagnostics) for ARC700
+ * TLB Management (flush/create/diagnostics) for MMUv3 and MMUv4
  *
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  *
- * vineetg: Aug 2011
- *  -Reintroduce duplicate PD fixup - some customer chips still have the issue
- *
- * vineetg: May 2011
- *  -No need to flush_cache_page( ) for each call to update_mmu_cache()
- *   some of the LMBench tests improved amazingly
- *      = page-fault thrice as fast (75 usec to 28 usec)
- *      = mmap twice as fast (9.6 msec to 4.6 msec),
- *      = fork (5.3 msec to 3.7 msec)
- *
- * vineetg: April 2011 :
- *  -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore,
- *      helps avoid a shift when preparing PD0 from PTE
- *
- * vineetg: April 2011 : Preparing for MMU V3
- *  -MMU v2/v3 BCRs decoded differently
- *  -Remove TLB_SIZE hardcoding as it's variable now: 256 or 512
- *  -tlb_entry_erase( ) can be void
- *  -local_flush_tlb_range( ):
- *      = need not "ceil" @end
- *      = walks MMU only if range spans < 32 entries, as opposed to 256
- *
- * Vineetg: Sept 10th 2008
- *  -Changes related to MMU v2 (Rel 4.8)
- *
- * Vineetg: Aug 29th 2008
- *  -In TLB Flush operations (Metal Fix MMU) there is a explict command to
- *    flush Micro-TLBS. If TLB Index Reg is invalid prior to TLBIVUTLB cmd,
- *    it fails. Thus need to load it with ANY valid value before invoking
- *    TLBIVUTLB cmd
- *
- * Vineetg: Aug 21th 2008:
- *  -Reduced the duration of IRQ lockouts in TLB Flush routines
- *  -Multiple copies of TLB erase code seperated into a "single" function
- *  -In TLB Flush routines, interrupt disabling moved UP to retrieve ASID
- *       in interrupt-safe region.
- *
- * Vineetg: April 23rd Bug #93131
- *    Problem: tlb_flush_kernel_range() doesn't do anything if the range to
- *              flush is more than the size of TLB itself.
- *
- * Rahul Trivedi : Codito Technologies 2004
  */
 
 #include <linux/module.h>
@@ -57,51 +15,12 @@
 #include <asm/mmu_context.h>
 #include <asm/mmu.h>
 
-/*			Need for ARC MMU v2
- *
- * ARC700 MMU-v1 had a Joint-TLB for Code and Data and is 2 way set-assoc.
- * For a memcpy operation with 3 players (src/dst/code) such that all 3 pages
- * map into same set, there would be contention for the 2 ways causing severe
- * Thrashing.
- *
- * Although J-TLB is 2 way set assoc, ARC700 caches J-TLB into uTLBS which has
- * much higher associativity. u-D-TLB is 8 ways, u-I-TLB is 4 ways.
- * Given this, the thrasing problem should never happen because once the 3
- * J-TLB entries are created (even though 3rd will knock out one of the prev
- * two), the u-D-TLB and u-I-TLB will have what is required to accomplish memcpy
- *
- * Yet we still see the Thrashing because a J-TLB Write cause flush of u-TLBs.
- * This is a simple design for keeping them in sync. So what do we do?
- * The solution which James came up was pretty neat. It utilised the assoc
- * of uTLBs by not invalidating always but only when absolutely necessary.
- *
- * - Existing TLB commands work as before
- * - New command (TLBWriteNI) for TLB write without clearing uTLBs
- * - New command (TLBIVUTLB) to invalidate uTLBs.
- *
- * The uTLBs need only be invalidated when pages are being removed from the
- * OS page table. If a 'victim' TLB entry is being overwritten in the main TLB
- * as a result of a miss, the removed entry is still allowed to exist in the
- * uTLBs as it is still valid and present in the OS page table. This allows the
- * full associativity of the uTLBs to hide the limited associativity of the main
- * TLB.
- *
- * During a miss handler, the new "TLBWriteNI" command is used to load
- * entries without clearing the uTLBs.
- *
- * When the OS page table is updated, TLB entries that may be associated with a
- * removed page are removed (flushed) from the TLB using TLBWrite. In this
- * circumstance, the uTLBs must also be cleared. This is done by using the
- * existing TLBWrite command. An explicit IVUTLB is also required for those
- * corner cases when TLBWrite was not executed at all because the corresp
- * J-TLB entry got evicted/replaced.
- */
-
-
 /* A copy of the ASID from the PID reg is kept in asid_cache */
 DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE;
 
-static int __read_mostly pae_exists;
+static struct cpuinfo_arc_mmu {
+	unsigned int ver, pg_sz_k, s_pg_sz_m, pae, sets, ways;
+} mmuinfo;
 
 /*
  * Utility Routine to erase a J-TLB entry
@@ -118,7 +37,12 @@ static inline void __tlb_entry_erase(void)
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
 }
 
-#if (CONFIG_ARC_MMU_VER < 4)
+static void utlb_invalidate(void)
+{
+	write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB);
+}
+
+#ifdef CONFIG_ARC_MMU_V3
 
 static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid)
 {
@@ -149,45 +73,7 @@ static void tlb_entry_erase(unsigned int vaddr_n_asid)
 	}
 }
 
-/****************************************************************************
- * ARC700 MMU caches recently used J-TLB entries (RAM) as uTLBs (FLOPs)
- *
- * New IVUTLB cmd in MMU v2 explictly invalidates the uTLB
- *
- * utlb_invalidate ( )
- *  -For v2 MMU calls Flush uTLB Cmd
- *  -For v1 MMU does nothing (except for Metal Fix v1 MMU)
- *      This is because in v1 TLBWrite itself invalidate uTLBs
- ***************************************************************************/
-
-static void utlb_invalidate(void)
-{
-#if (CONFIG_ARC_MMU_VER >= 2)
-
-#if (CONFIG_ARC_MMU_VER == 2)
-	/* MMU v2 introduced the uTLB Flush command.
-	 * There was however an obscure hardware bug, where uTLB flush would
-	 * fail when a prior probe for J-TLB (both totally unrelated) would
-	 * return lkup err - because the entry didn't exist in MMU.
-	 * The Workround was to set Index reg with some valid value, prior to
-	 * flush. This was fixed in MMU v3 hence not needed any more
-	 */
-	unsigned int idx;
-
-	/* make sure INDEX Reg is valid */
-	idx = read_aux_reg(ARC_REG_TLBINDEX);
-
-	/* If not write some dummy val */
-	if (unlikely(idx & TLB_LKUP_ERR))
-		write_aux_reg(ARC_REG_TLBINDEX, 0xa);
-#endif
-
-	write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB);
-#endif
-
-}
-
-static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
+static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1)
 {
 	unsigned int idx;
 
@@ -217,12 +103,7 @@ static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
 }
 
-#else	/* CONFIG_ARC_MMU_VER >= 4) */
-
-static void utlb_invalidate(void)
-{
-	/* No need since uTLB is always in sync with JTLB */
-}
+#else	/* MMUv4 */
 
 static void tlb_entry_erase(unsigned int vaddr_n_asid)
 {
@@ -230,13 +111,16 @@ static void tlb_entry_erase(unsigned int vaddr_n_asid)
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBDeleteEntry);
 }
 
-static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
+static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1)
 {
 	write_aux_reg(ARC_REG_TLBPD0, pd0);
-	write_aux_reg(ARC_REG_TLBPD1, pd1);
 
-	if (is_pae40_enabled())
+	if (!is_pae40_enabled()) {
+		write_aux_reg(ARC_REG_TLBPD1, pd1);
+	} else {
+		write_aux_reg(ARC_REG_TLBPD1, pd1 & 0xFFFFFFFF);
 		write_aux_reg(ARC_REG_TLBPD1HI, (u64)pd1 >> 32);
+	}
 
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBInsertEntry);
 }
@@ -249,7 +133,7 @@ static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
 
 noinline void local_flush_tlb_all(void)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
 	unsigned long flags;
 	unsigned int entry;
 	int num_tlb = mmu->sets * mmu->ways;
@@ -267,7 +151,7 @@ noinline void local_flush_tlb_all(void)
 	for (entry = 0; entry < num_tlb; entry++) {
 		/* write this entry to the TLB */
 		write_aux_reg(ARC_REG_TLBINDEX, entry);
-		write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
+		write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI);
 	}
 
 	if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
@@ -278,7 +162,7 @@ noinline void local_flush_tlb_all(void)
 
 		for (entry = stlb_idx; entry < stlb_idx + 16; entry++) {
 			write_aux_reg(ARC_REG_TLBINDEX, entry);
-			write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
+			write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI);
 		}
 	}
 
@@ -288,7 +172,7 @@ noinline void local_flush_tlb_all(void)
 }
 
 /*
- * Flush the entrie MM for userland. The fastest way is to move to Next ASID
+ * Flush the entire MM for userland. The fastest way is to move to Next ASID
  */
 noinline void local_flush_tlb_mm(struct mm_struct *mm)
 {
@@ -319,7 +203,7 @@ noinline void local_flush_tlb_mm(struct mm_struct *mm)
  * Difference between this and Kernel Range Flush is
  *  -Here the fastest way (if range is too large) is to move to next ASID
  *      without doing any explicit Shootdown
- *  -In case of kernel Flush, entry has to be shot down explictly
+ *  -In case of kernel Flush, entry has to be shot down explicitly
  */
 void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			   unsigned long end)
@@ -328,7 +212,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	unsigned long flags;
 
 	/* If range @start to @end is more than 32 TLB entries deep,
-	 * its better to move to a new ASID rather than searching for
+	 * it's better to move to a new ASID rather than searching for
 	 * individual entries and then shooting them down
 	 *
 	 * The calc above is rough, doesn't account for unaligned parts,
@@ -355,8 +239,6 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		}
 	}
 
-	utlb_invalidate();
-
 	local_irq_restore(flags);
 }
 
@@ -385,8 +267,6 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 		start += PAGE_SIZE;
 	}
 
-	utlb_invalidate();
-
 	local_irq_restore(flags);
 }
 
@@ -407,7 +287,6 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 
 	if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) {
 		tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm, cpu));
-		utlb_invalidate();
 	}
 
 	local_irq_restore(flags);
@@ -512,12 +391,12 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 /*
  * Routine to create a TLB entry
  */
-void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
+static void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 {
 	unsigned long flags;
 	unsigned int asid_or_sasid, rwx;
 	unsigned long pd0;
-	pte_t pd1;
+	phys_addr_t pd1;
 
 	/*
 	 * create_tlb() assumes that current->mm == vma->mm, since
@@ -526,11 +405,10 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 	 *
 	 * Removing the assumption involves
 	 * -Using vma->mm->context{ASID,SASID}, as opposed to MMU reg.
-	 * -Fix the TLB paranoid debug code to not trigger false negatives.
 	 * -More importantly it makes this handler inconsistent with fast-path
 	 *  TLB Refill handler which always deals with "current"
 	 *
-	 * Lets see the use cases when current->mm != vma->mm and we land here
+	 * Let's see the use cases when current->mm != vma->mm and we land here
 	 *  1. execve->copy_strings()->__get_user_pages->handle_mm_fault
 	 *     Here VM wants to pre-install a TLB entry for user stack while
 	 *     current->mm still points to pre-execve mm (hence the condition).
@@ -549,8 +427,6 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 
 	local_irq_save(flags);
 
-	tlb_paranoid_check(asid_mm(vma->vm_mm, smp_processor_id()), vaddr);
-
 	vaddr &= PAGE_MASK;
 
 	/* update this PTE credentials */
@@ -593,39 +469,37 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
  * Note that flush (when done) involves both WBACK - so physical page is
  * in sync as well as INV - so any non-congruent aliases don't remain
  */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
-		      pte_t *ptep)
+void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma,
+		unsigned long vaddr_unaligned, pte_t *ptep, unsigned int nr)
 {
 	unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
-	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK;
+	phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
 	struct page *page = pfn_to_page(pte_pfn(*ptep));
 
 	create_tlb(vma, vaddr, ptep);
 
-	if (page == ZERO_PAGE(0)) {
+	if (page == ZERO_PAGE(0))
 		return;
-	}
 
 	/*
-	 * Exec page : Independent of aliasing/page-color considerations,
-	 *	       since icache doesn't snoop dcache on ARC, any dirty
-	 *	       K-mapping of a code page needs to be wback+inv so that
-	 *	       icache fetch by userspace sees code correctly.
-	 * !EXEC page: If K-mapping is NOT congruent to U-mapping, flush it
-	 *	       so userspace sees the right data.
-	 *  (Avoids the flush for Non-exec + congruent mapping case)
+	 * For executable pages, since icache doesn't snoop dcache, any
+	 * dirty K-mapping of a code page needs to be wback+inv so that
+	 * icache fetch by userspace sees code correctly.
 	 */
-	if ((vma->vm_flags & VM_EXEC) ||
-	     addr_not_cache_congruent(paddr, vaddr)) {
-
-		int dirty = !test_and_set_bit(PG_dc_clean, &page->flags);
+	if (vma->vm_flags & VM_EXEC) {
+		struct folio *folio = page_folio(page);
+		int dirty = !test_and_set_bit(PG_dc_clean, &folio->flags.f);
 		if (dirty) {
+			unsigned long offset = offset_in_folio(folio, paddr);
+			nr = folio_nr_pages(folio);
+			paddr -= offset;
+			vaddr -= offset;
 			/* wback + inv dcache lines (K-mapping) */
-			__flush_dcache_page(paddr, paddr);
+			__flush_dcache_pages(paddr, paddr, nr);
 
 			/* invalidate any existing icache lines (U-mapping) */
 			if (vma->vm_flags & VM_EXEC)
-				__inv_icache_page(paddr, vaddr);
+				__inv_icache_pages(paddr, vaddr, nr);
 		}
 	}
 }
@@ -641,7 +515,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
  * Super Page size is configurable in hardware (4K to 16M), but fixed once
  * RTL builds.
  *
- * The exact THP size a Linx configuration will support is a function of:
+ * The exact THP size a Linux configuration will support is a function of:
  *  - MMU page size (typical 8K, RTL fixed)
  *  - software page walker address split between PGD:PTE:PFN (typical
  *    11:8:13, but can be changed with 1 line)
@@ -657,44 +531,7 @@ void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
 				 pmd_t *pmd)
 {
 	pte_t pte = __pte(pmd_val(*pmd));
-	update_mmu_cache(vma, addr, &pte);
-}
-
-void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
-				pgtable_t pgtable)
-{
-	struct list_head *lh = (struct list_head *) pgtable;
-
-	assert_spin_locked(&mm->page_table_lock);
-
-	/* FIFO */
-	if (!pmd_huge_pte(mm, pmdp))
-		INIT_LIST_HEAD(lh);
-	else
-		list_add(lh, (struct list_head *) pmd_huge_pte(mm, pmdp));
-	pmd_huge_pte(mm, pmdp) = pgtable;
-}
-
-pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
-{
-	struct list_head *lh;
-	pgtable_t pgtable;
-
-	assert_spin_locked(&mm->page_table_lock);
-
-	pgtable = pmd_huge_pte(mm, pmdp);
-	lh = (struct list_head *) pgtable;
-	if (list_empty(lh))
-		pmd_huge_pte(mm, pmdp) = NULL;
-	else {
-		pmd_huge_pte(mm, pmdp) = (pgtable_t) lh->next;
-		list_del(lh);
-	}
-
-	pte_val(pgtable[0]) = 0;
-	pte_val(pgtable[1]) = 0;
-
-	return pgtable;
+	update_mmu_cache_range(NULL, vma, addr, &pte, HPAGE_PMD_NR);
 }
 
 void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
@@ -719,139 +556,92 @@ void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 
 #endif
 
-/* Read the Cache Build Confuration Registers, Decode them and save into
+/* Read the Cache Build Configuration Registers, Decode them and save into
  * the cpuinfo structure for later use.
  * No Validation is done here, simply read/convert the BCRs
  */
-void read_decode_mmu_bcr(void)
+int arc_mmu_mumbojumbo(int c, char *buf, int len)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
-	unsigned int tmp;
-	struct bcr_mmu_1_2 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int ver:8, ways:4, sets:4, u_itlb:8, u_dtlb:8;
-#else
-		unsigned int u_dtlb:8, u_itlb:8, sets:4, ways:4, ver:8;
-#endif
-	} *mmu2;
-
-	struct bcr_mmu_3 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4,
-		     u_itlb:4, u_dtlb:4;
-#else
-	unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, sasid:1, res:3, sets:4,
-		     ways:4, ver:8;
-#endif
-	} *mmu3;
-
-	struct bcr_mmu_4 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int ver:8, sasid:1, sz1:4, sz0:4, res:2, pae:1,
-		     n_ways:2, n_entry:2, n_super:2, u_itlb:3, u_dtlb:3;
-#else
-	/*           DTLB      ITLB      JES        JE         JA      */
-	unsigned int u_dtlb:3, u_itlb:3, n_super:2, n_entry:2, n_ways:2,
-		     pae:1, res:2, sz0:4, sz1:4, sasid:1, ver:8;
-#endif
-	} *mmu4;
-
-	tmp = read_aux_reg(ARC_REG_MMU_BCR);
-	mmu->ver = (tmp >> 24);
-
-	if (is_isa_arcompact()) {
-		if (mmu->ver <= 2) {
-			mmu2 = (struct bcr_mmu_1_2 *)&tmp;
-			mmu->pg_sz_k = TO_KB(0x2000);
-			mmu->sets = 1 << mmu2->sets;
-			mmu->ways = 1 << mmu2->ways;
-			mmu->u_dtlb = mmu2->u_dtlb;
-			mmu->u_itlb = mmu2->u_itlb;
-		} else {
-			mmu3 = (struct bcr_mmu_3 *)&tmp;
-			mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1);
-			mmu->sets = 1 << mmu3->sets;
-			mmu->ways = 1 << mmu3->ways;
-			mmu->u_dtlb = mmu3->u_dtlb;
-			mmu->u_itlb = mmu3->u_itlb;
-			mmu->sasid = mmu3->sasid;
-		}
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
+	unsigned int bcr, u_dtlb, u_itlb, sasid;
+	struct bcr_mmu_3 *mmu3;
+	struct bcr_mmu_4 *mmu4;
+	char super_pg[64] = "";
+	int n = 0;
+
+	bcr = read_aux_reg(ARC_REG_MMU_BCR);
+	mmu->ver = (bcr >> 24);
+
+	if (is_isa_arcompact() && mmu->ver == 3) {
+		mmu3 = (struct bcr_mmu_3 *)&bcr;
+		mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1);
+		mmu->sets = 1 << mmu3->sets;
+		mmu->ways = 1 << mmu3->ways;
+		u_dtlb = mmu3->u_dtlb;
+		u_itlb = mmu3->u_itlb;
+		sasid = mmu3->sasid;
 	} else {
-		mmu4 = (struct bcr_mmu_4 *)&tmp;
+		mmu4 = (struct bcr_mmu_4 *)&bcr;
 		mmu->pg_sz_k = 1 << (mmu4->sz0 - 1);
 		mmu->s_pg_sz_m = 1 << (mmu4->sz1 - 11);
 		mmu->sets = 64 << mmu4->n_entry;
 		mmu->ways = mmu4->n_ways * 2;
-		mmu->u_dtlb = mmu4->u_dtlb * 4;
-		mmu->u_itlb = mmu4->u_itlb * 4;
-		mmu->sasid = mmu4->sasid;
-		pae_exists = mmu->pae = mmu4->pae;
+		u_dtlb = mmu4->u_dtlb * 4;
+		u_itlb = mmu4->u_itlb * 4;
+		sasid = mmu4->sasid;
+		mmu->pae = mmu4->pae;
 	}
-}
-
-char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
-{
-	int n = 0;
-	struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu;
-	char super_pg[64] = "";
 
-	if (p_mmu->s_pg_sz_m)
-		scnprintf(super_pg, 64, "%dM Super Page %s",
-			  p_mmu->s_pg_sz_m,
-			  IS_USED_CFG(CONFIG_TRANSPARENT_HUGEPAGE));
+	if (mmu->s_pg_sz_m)
+		scnprintf(super_pg, 64, "/%dM%s",
+			  mmu->s_pg_sz_m,
+			  IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) ? " (THP enabled)":"");
 
 	n += scnprintf(buf + n, len - n,
-		      "MMU [v%x]\t: %dk PAGE, %sJTLB %d (%dx%d), uDTLB %d, uITLB %d%s%s\n",
-		       p_mmu->ver, p_mmu->pg_sz_k, super_pg,
-		       p_mmu->sets * p_mmu->ways, p_mmu->sets, p_mmu->ways,
-		       p_mmu->u_dtlb, p_mmu->u_itlb,
-		       IS_AVAIL2(p_mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40));
+		      "MMU [v%x]\t: %dk%s, swalk %d lvl, JTLB %dx%d, uDTLB %d, uITLB %d%s%s%s\n",
+		       mmu->ver, mmu->pg_sz_k, super_pg, CONFIG_PGTABLE_LEVELS,
+		       mmu->sets, mmu->ways,
+		       u_dtlb, u_itlb,
+		       IS_AVAIL1(sasid, ", SASID"),
+		       IS_AVAIL2(mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40));
 
-	return buf;
+	return n;
 }
 
 int pae40_exist_but_not_enab(void)
 {
-	return pae_exists && !is_pae40_enabled();
+	return mmuinfo.pae && !is_pae40_enabled();
 }
 
 void arc_mmu_init(void)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
-	char str[256];
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
 	int compat = 0;
 
-	pr_info("%s", arc_mmu_mumbojumbo(0, str, sizeof(str)));
-
 	/*
-	 * Can't be done in processor.h due to header include depenedencies
+	 * Can't be done in processor.h due to header include dependencies
 	 */
 	BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_KVADDR_SIZE << 20), PMD_SIZE));
 
 	/*
 	 * stack top size sanity check,
-	 * Can't be done in processor.h due to header include depenedencies
+	 * Can't be done in processor.h due to header include dependencies
 	 */
 	BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE));
 
 	/*
 	 * Ensure that MMU features assumed by kernel exist in hardware.
-	 * For older ARC700 cpus, it has to be exact match, since the MMU
-	 * revisions were not backwards compatible (MMUv3 TLB layout changed
-	 * so even if kernel for v2 didn't use any new cmds of v3, it would
-	 * still not work.
-	 * For HS cpus, MMUv4 was baseline and v5 is backwards compatible
-	 * (will run older software).
+	 *  - For older ARC700 cpus, only v3 supported
+	 *  - For HS cpus, v4 was baseline and v5 is backwards compatible
+	 *    (will run older software).
 	 */
-	if (is_isa_arcompact() && mmu->ver == CONFIG_ARC_MMU_VER)
+	if (is_isa_arcompact() && mmu->ver == 3)
 		compat = 1;
-	else if (is_isa_arcv2() && mmu->ver >= CONFIG_ARC_MMU_VER)
+	else if (is_isa_arcv2() && mmu->ver >= 4)
 		compat = 1;
 
-	if (!compat) {
-		panic("MMU ver %d doesn't match kernel built for %d...\n",
-		      mmu->ver, CONFIG_ARC_MMU_VER);
-	}
+	if (!compat)
+		panic("MMU ver %d doesn't match kernel built for\n", mmu->ver);
 
 	if (mmu->pg_sz_k != TO_KB(PAGE_SIZE))
 		panic("MMU pg size != PAGE_SIZE (%luk)\n", TO_KB(PAGE_SIZE));
@@ -864,14 +654,11 @@ void arc_mmu_init(void)
 	if (IS_ENABLED(CONFIG_ARC_HAS_PAE40) && !mmu->pae)
 		panic("Hardware doesn't support PAE40\n");
 
-	/* Enable the MMU */
-	write_aux_reg(ARC_REG_PID, MMU_ENABLE);
+	/* Enable the MMU with ASID 0 */
+	mmu_setup_asid(NULL, 0);
 
-	/* In smp we use this reg for interrupt 1 scratch */
-#ifndef CONFIG_SMP
-	/* swapper_pg_dir is the pgd for the kernel, used by vmalloc */
-	write_aux_reg(ARC_REG_SCRATCH_DATA0, swapper_pg_dir);
-#endif
+	/* cache the pgd pointer in MMU SCRATCH reg (ARCv2 only) */
+	mmu_setup_pgd(NULL, swapper_pg_dir);
 
 	if (pae40_exist_but_not_enab())
 		write_aux_reg(ARC_REG_TLBPD1HI, 0);
@@ -902,12 +689,12 @@ void arc_mmu_init(void)
  *      the duplicate one.
  * -Knob to be verbose abt it.(TODO: hook them up to debugfs)
  */
-volatile int dup_pd_silent; /* Be slient abt it or complain (default) */
+volatile int dup_pd_silent; /* Be silent abt it or complain (default) */
 
 void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 			  struct pt_regs *regs)
 {
-	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
+	struct cpuinfo_arc_mmu *mmu = &mmuinfo;
 	unsigned long flags;
 	int set, n_ways = mmu->ways;
 
@@ -966,40 +753,3 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 
 	local_irq_restore(flags);
 }
-
-/***********************************************************************
- * Diagnostic Routines
- *  -Called from Low Level TLB Hanlders if things don;t look good
- **********************************************************************/
-
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-
-/*
- * Low Level ASM TLB handler calls this if it finds that HW and SW ASIDS
- * don't match
- */
-void print_asid_mismatch(int mm_asid, int mmu_asid, int is_fast_path)
-{
-	pr_emerg("ASID Mismatch in %s Path Handler: sw-pid=0x%x hw-pid=0x%x\n",
-	       is_fast_path ? "Fast" : "Slow", mm_asid, mmu_asid);
-
-	__asm__ __volatile__("flag 1");
-}
-
-void tlb_paranoid_check(unsigned int mm_asid, unsigned long addr)
-{
-	unsigned int mmu_asid;
-
-	mmu_asid = read_aux_reg(ARC_REG_PID) & 0xff;
-
-	/*
-	 * At the time of a TLB miss/installation
-	 *   - HW version needs to match SW version
-	 *   - SW needs to have a valid ASID
-	 */
-	if (addr < 0x70000000 &&
-	    ((mm_asid == MM_CTXT_NO_ASID) ||
-	      (mmu_asid != (mm_asid & MM_CTXT_ASID_MASK))))
-		print_asid_mismatch(mm_asid, mmu_asid, 0);
-}
-#endif
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index c55d95dd2f39..dc65e87a531f 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -5,19 +5,19 @@
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  *
  * Vineetg: April 2011 :
- *  -MMU v1: moved out legacy code into a seperate file
+ *  -MMU v1: moved out legacy code into a separate file
  *  -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore,
  *      helps avoid a shift when preparing PD0 from PTE
  *
  * Vineetg: July 2009
- *  -For MMU V2, we need not do heuristics at the time of commiting a D-TLB
- *   entry, so that it doesn't knock out it's I-TLB entry
+ *  -For MMU V2, we need not do heuristics at the time of committing a D-TLB
+ *   entry, so that it doesn't knock out its I-TLB entry
  *  -Some more fine tuning:
  *   bmsk instead of add, asl.cc instead of branch, delay slot utilise etc
  *
  * Vineetg: July 2009
  *  -Practically rewrote the I/D TLB Miss handlers
- *   Now 40 and 135 instructions a peice as compared to 131 and 449 resp.
+ *   Now 40 and 135 instructions apiece as compared to 131 and 449 resp.
  *   Hence Leaner by 1.5 K
  *   Used Conditional arithmetic to replace excessive branching
  *   Also used short instructions wherever possible
@@ -33,13 +33,12 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/pgtable.h>
 #include <asm/entry.h>
 #include <asm/mmu.h>
-#include <asm/pgtable.h>
 #include <asm/arcregs.h>
 #include <asm/cache.h>
 #include <asm/processor.h>
-#include <asm/tlb-mmu1.h>
 
 #ifdef CONFIG_ISA_ARCOMPACT
 ;-----------------------------------------------------------------
@@ -94,11 +93,6 @@ ex_saved_reg1:
 	st_s  r1, [r0, 4]
 	st_s  r2, [r0, 8]
 	st_s  r3, [r0, 12]
-
-	; VERIFY if the ASID in MMU-PID Reg is same as
-	; one in Linux data structures
-
-	tlb_paranoid_check_asm
 .endm
 
 .macro TLBMISS_RESTORE_REGS
@@ -122,69 +116,42 @@ ex_saved_reg1:
 #else	/* ARCv2 */
 
 .macro TLBMISS_FREEUP_REGS
+#ifdef CONFIG_ARC_HAS_LL64
+	std   r0, [sp, -16]
+	std   r2, [sp, -8]
+#else
 	PUSH  r0
 	PUSH  r1
 	PUSH  r2
 	PUSH  r3
+#endif
 .endm
 
 .macro TLBMISS_RESTORE_REGS
+#ifdef CONFIG_ARC_HAS_LL64
+	ldd   r0, [sp, -16]
+	ldd   r2, [sp, -8]
+#else
 	POP   r3
 	POP   r2
 	POP   r1
 	POP   r0
+#endif
 .endm
 
 #endif
 
 ;============================================================================
-;  Troubleshooting Stuff
+;TLB Miss handling Code
 ;============================================================================
 
-; Linux keeps ASID (Address Space ID) in task->active_mm->context.asid
-; When Creating TLB Entries, instead of doing 3 dependent loads from memory,
-; we use the MMU PID Reg to get current ASID.
-; In bizzare scenrios SW and HW ASID can get out-of-sync which is trouble.
-; So we try to detect this in TLB Mis shandler
-
-.macro tlb_paranoid_check_asm
-
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-
-	GET_CURR_TASK_ON_CPU  r3
-	ld r0, [r3, TASK_ACT_MM]
-	ld r0, [r0, MM_CTXT+MM_CTXT_ASID]
-	breq r0, 0, 55f	; Error if no ASID allocated
-
-	lr r1, [ARC_REG_PID]
-	and r1, r1, 0xFF
-
-	and r2, r0, 0xFF	; MMU PID bits only for comparison
-	breq r1, r2, 5f
-
-55:
-	; Error if H/w and S/w ASID don't match, but NOT if in kernel mode
-	lr  r2, [erstatus]
-	bbit0 r2, STATUS_U_BIT, 5f
-
-	; We sure are in troubled waters, Flag the error, but to do so
-	; need to switch to kernel mode stack to call error routine
-	GET_TSK_STACK_BASE   r3, sp
-
-	; Call printk to shoutout aloud
-	mov r2, 1
-	j print_asid_mismatch
-
-5:	; ASIDs match so proceed normally
-	nop
-
+#ifndef PMD_SHIFT
+#define PMD_SHIFT PUD_SHIFT
 #endif
 
-.endm
-
-;============================================================================
-;TLB Miss handling Code
-;============================================================================
+#ifndef PUD_SHIFT
+#define PUD_SHIFT PGDIR_SHIFT
+#endif
 
 ;-----------------------------------------------------------------------------
 ; This macro does the page-table lookup for the faulting address.
@@ -193,7 +160,7 @@ ex_saved_reg1:
 
 	lr  r2, [efa]
 
-#ifndef CONFIG_SMP
+#ifdef CONFIG_ISA_ARCV2
 	lr  r1, [ARC_REG_SCRATCH_DATA0] ; current pgd
 #else
 	GET_CURR_TASK_ON_CPU  r1
@@ -206,6 +173,24 @@ ex_saved_reg1:
 	tst	r3, r3
 	bz	do_slow_path_pf         ; if no Page Table, do page fault
 
+#if CONFIG_PGTABLE_LEVELS > 3
+	lsr     r0, r2, PUD_SHIFT	; Bits for indexing into PUD
+	and	r0, r0, (PTRS_PER_PUD - 1)
+	ld.as	r1, [r3, r0]		; PMD entry
+	tst	r1, r1
+	bz	do_slow_path_pf
+	mov	r3, r1
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+	lsr     r0, r2, PMD_SHIFT	; Bits for indexing into PMD
+	and	r0, r0, (PTRS_PER_PMD - 1)
+	ld.as	r1, [r3, r0]		; PMD entry
+	tst	r1, r1
+	bz	do_slow_path_pf
+	mov	r3, r1
+#endif
+
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 	and.f	0, r3, _PAGE_HW_SZ	; Is this Huge PMD (thp)
 	add2.nz	r1, r1, r0
@@ -269,24 +254,13 @@ ex_saved_reg1:
 ; Commit the TLB entry into MMU
 
 .macro COMMIT_ENTRY_TO_MMU
-#if (CONFIG_ARC_MMU_VER < 4)
-
-#ifdef CONFIG_EZNPS_MTM_EXT
-	/* verify if entry for this vaddr+ASID already exists */
-	sr    TLBProbe, [ARC_REG_TLBCOMMAND]
-	lr    r0, [ARC_REG_TLBINDEX]
-	bbit0 r0, 31, 88f
-#endif
+#ifdef CONFIG_ARC_MMU_V3
 
 	/* Get free TLB slot: Set = computed from vaddr, way = random */
 	sr  TLBGetIndex, [ARC_REG_TLBCOMMAND]
 
 	/* Commit the Write */
-#if (CONFIG_ARC_MMU_VER >= 2)   /* introduced in v2 */
 	sr TLBWriteNI, [ARC_REG_TLBCOMMAND]
-#else
-	sr TLBWrite, [ARC_REG_TLBCOMMAND]
-#endif
 
 #else
 	sr TLBInsertEntry, [ARC_REG_TLBCOMMAND]
@@ -370,21 +344,12 @@ ENTRY(EV_TLBMissD)
 
 	;----------------------------------------------------------------
 	; UPDATE_PTE: Let Linux VM know that page was accessed/dirty
-	lr      r3, [ecr]
 	or      r0, r0, _PAGE_ACCESSED        ; Accessed bit always
-	btst_s  r3,  ECR_C_BIT_DTLB_ST_MISS   ; See if it was a Write Access ?
 	or.nz   r0, r0, _PAGE_DIRTY           ; if Write, set Dirty bit as well
 	st_s    r0, [r1]                      ; Write back PTE
 
 	CONV_PTE_TO_TLB
 
-#if (CONFIG_ARC_MMU_VER == 1)
-	; MMU with 2 way set assoc J-TLB, needs some help in pathetic case of
-	; memcpy where 3 parties contend for 2 ways, ensuing a livelock.
-	; But only for old MMU or one with Metal Fix
-	TLB_WRITE_HEURISTICS
-#endif
-
 	COMMIT_ENTRY_TO_MMU
 	TLBMISS_RESTORE_REGS
 EV_TLBMissD_fast_ret:	; additional label for VDK OS-kit instrumentation
diff --git a/arch/arc/net/Makefile b/arch/arc/net/Makefile
new file mode 100644
index 000000000000..ea5790952e9a
--- /dev/null
+++ b/arch/arc/net/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+ifeq ($(CONFIG_ISA_ARCV2),y)
+	obj-$(CONFIG_BPF_JIT) += bpf_jit_core.o
+	obj-$(CONFIG_BPF_JIT) += bpf_jit_arcv2.o
+endif
diff --git a/arch/arc/net/bpf_jit.h b/arch/arc/net/bpf_jit.h
new file mode 100644
index 000000000000..495f3023e4c1
--- /dev/null
+++ b/arch/arc/net/bpf_jit.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * The interface that a back-end should provide to bpf_jit_core.c.
+ *
+ * Copyright (c) 2024 Synopsys Inc.
+ * Author: Shahab Vahedi <shahab@synopsys.com>
+ */
+
+#ifndef _ARC_BPF_JIT_H
+#define _ARC_BPF_JIT_H
+
+#include <linux/bpf.h>
+#include <linux/filter.h>
+
+/* Print debug info and assert. */
+//#define ARC_BPF_JIT_DEBUG
+
+/* Determine the address type of the target. */
+#ifdef CONFIG_ISA_ARCV2
+#define ARC_ADDR u32
+#endif
+
+/*
+ * For the translation of some BPF instructions, a temporary register
+ * might be needed for some interim data.
+ */
+#define JIT_REG_TMP MAX_BPF_JIT_REG
+
+/*
+ * Buffer access: If buffer "b" is not NULL, advance by "n" bytes.
+ *
+ * This macro must be used in any place that potentially requires a
+ * "buf + len". This way, we make sure that the "buf" argument for
+ * the underlying "arc_*(buf, ...)" ends up as NULL instead of something
+ * like "0+4" or "0+8", etc. Those "arc_*()" functions check their "buf"
+ * value to decide if instructions should be emitted or not.
+ */
+#define BUF(b, n) (((b) != NULL) ? ((b) + (n)) : (b))
+
+/************** Functions that the back-end must provide **************/
+/* Extension for 32-bit operations. */
+u8 zext(u8 *buf, u8 rd);
+/***** Moves *****/
+u8 mov_r32(u8 *buf, u8 rd, u8 rs, u8 sign_ext);
+u8 mov_r32_i32(u8 *buf, u8 reg, s32 imm);
+u8 mov_r64(u8 *buf, u8 rd, u8 rs, u8 sign_ext);
+u8 mov_r64_i32(u8 *buf, u8 reg, s32 imm);
+u8 mov_r64_i64(u8 *buf, u8 reg, u32 lo, u32 hi);
+/***** Loads and stores *****/
+u8 load_r(u8 *buf, u8 rd, u8 rs, s16 off, u8 size, bool sign_ext);
+u8 store_r(u8 *buf, u8 rd, u8 rs, s16 off, u8 size);
+u8 store_i(u8 *buf, s32 imm, u8 rd, s16 off, u8 size);
+/***** Addition *****/
+u8 add_r32(u8 *buf, u8 rd, u8 rs);
+u8 add_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 add_r64(u8 *buf, u8 rd, u8 rs);
+u8 add_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Subtraction *****/
+u8 sub_r32(u8 *buf, u8 rd, u8 rs);
+u8 sub_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 sub_r64(u8 *buf, u8 rd, u8 rs);
+u8 sub_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Multiplication *****/
+u8 mul_r32(u8 *buf, u8 rd, u8 rs);
+u8 mul_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 mul_r64(u8 *buf, u8 rd, u8 rs);
+u8 mul_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Division *****/
+u8 div_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext);
+u8 div_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext);
+/***** Remainder *****/
+u8 mod_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext);
+u8 mod_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext);
+/***** Bitwise AND *****/
+u8 and_r32(u8 *buf, u8 rd, u8 rs);
+u8 and_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 and_r64(u8 *buf, u8 rd, u8 rs);
+u8 and_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise OR *****/
+u8 or_r32(u8 *buf, u8 rd, u8 rs);
+u8 or_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 or_r64(u8 *buf, u8 rd, u8 rs);
+u8 or_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise XOR *****/
+u8 xor_r32(u8 *buf, u8 rd, u8 rs);
+u8 xor_r32_i32(u8 *buf, u8 rd, s32 imm);
+u8 xor_r64(u8 *buf, u8 rd, u8 rs);
+u8 xor_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise Negate *****/
+u8 neg_r32(u8 *buf, u8 r);
+u8 neg_r64(u8 *buf, u8 r);
+/***** Bitwise left shift *****/
+u8 lsh_r32(u8 *buf, u8 rd, u8 rs);
+u8 lsh_r32_i32(u8 *buf, u8 rd, u8 imm);
+u8 lsh_r64(u8 *buf, u8 rd, u8 rs);
+u8 lsh_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise right shift (logical) *****/
+u8 rsh_r32(u8 *buf, u8 rd, u8 rs);
+u8 rsh_r32_i32(u8 *buf, u8 rd, u8 imm);
+u8 rsh_r64(u8 *buf, u8 rd, u8 rs);
+u8 rsh_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Bitwise right shift (arithmetic) *****/
+u8 arsh_r32(u8 *buf, u8 rd, u8 rs);
+u8 arsh_r32_i32(u8 *buf, u8 rd, u8 imm);
+u8 arsh_r64(u8 *buf, u8 rd, u8 rs);
+u8 arsh_r64_i32(u8 *buf, u8 rd, s32 imm);
+/***** Frame related *****/
+u32 mask_for_used_regs(u8 bpf_reg, bool is_call);
+u8 arc_prologue(u8 *buf, u32 usage, u16 frame_size);
+u8 arc_epilogue(u8 *buf, u32 usage, u16 frame_size);
+/***** Jumps *****/
+/*
+ * Different sorts of conditions (ARC enum as opposed to BPF_*).
+ *
+ * Do not change the order of enums here. ARC_CC_SLE+1 is used
+ * to determine the number of JCCs.
+ */
+enum ARC_CC {
+	ARC_CC_UGT = 0,		/* unsigned >  */
+	ARC_CC_UGE,		/* unsigned >= */
+	ARC_CC_ULT,		/* unsigned <  */
+	ARC_CC_ULE,		/* unsigned <= */
+	ARC_CC_SGT,		/*   signed >  */
+	ARC_CC_SGE,		/*   signed >= */
+	ARC_CC_SLT,		/*   signed <  */
+	ARC_CC_SLE,		/*   signed <= */
+	ARC_CC_AL,		/* always      */
+	ARC_CC_EQ,		/*          == */
+	ARC_CC_NE,		/*          != */
+	ARC_CC_SET,		/* test        */
+	ARC_CC_LAST
+};
+
+/*
+ * A few notes:
+ *
+ * - check_jmp_*() are prerequisites before calling the gen_jmp_*().
+ *   They return "true" if the jump is possible and "false" otherwise.
+ *
+ * - The notion of "*_off" is to emphasize that these parameters are
+ *   merely offsets in the JIT stream and not absolute addresses. One
+ *   can look at them as addresses if the JIT code would start from
+ *   address 0x0000_0000. Nonetheless, since the buffer address for the
+ *   JIT is on a word-aligned address, this works and actually makes
+ *   things simpler (offsets are in the range of u32 which is more than
+ *   enough).
+ */
+bool check_jmp_32(u32 curr_off, u32 targ_off, u8 cond);
+bool check_jmp_64(u32 curr_off, u32 targ_off, u8 cond);
+u8 gen_jmp_32(u8 *buf, u8 rd, u8 rs, u8 cond, u32 c_off, u32 t_off);
+u8 gen_jmp_64(u8 *buf, u8 rd, u8 rs, u8 cond, u32 c_off, u32 t_off);
+/***** Miscellaneous *****/
+u8 gen_func_call(u8 *buf, ARC_ADDR func_addr, bool external_func);
+u8 arc_to_bpf_return(u8 *buf);
+/*
+ * - Perform byte swaps on "rd" based on the "size".
+ * - If "force" is set, do it unconditionally. Otherwise, consider the
+ *   desired "endian"ness and the host endianness.
+ * - For data "size"s up to 32 bits, perform a zero-extension if asked
+ *   by the "do_zext" boolean.
+ */
+u8 gen_swap(u8 *buf, u8 rd, u8 size, u8 endian, bool force, bool do_zext);
+
+#endif /* _ARC_BPF_JIT_H */
diff --git a/arch/arc/net/bpf_jit_arcv2.c b/arch/arc/net/bpf_jit_arcv2.c
new file mode 100644
index 000000000000..6d989b6d88c6
--- /dev/null
+++ b/arch/arc/net/bpf_jit_arcv2.c
@@ -0,0 +1,3007 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The ARCv2 backend of Just-In-Time compiler for eBPF bytecode.
+ *
+ * Copyright (c) 2024 Synopsys Inc.
+ * Author: Shahab Vahedi <shahab@synopsys.com>
+ */
+#include <linux/bug.h>
+#include "bpf_jit.h"
+
+/* ARC core registers. */
+enum {
+	ARC_R_0,  ARC_R_1,  ARC_R_2,  ARC_R_3,  ARC_R_4,  ARC_R_5,
+	ARC_R_6,  ARC_R_7,  ARC_R_8,  ARC_R_9,  ARC_R_10, ARC_R_11,
+	ARC_R_12, ARC_R_13, ARC_R_14, ARC_R_15, ARC_R_16, ARC_R_17,
+	ARC_R_18, ARC_R_19, ARC_R_20, ARC_R_21, ARC_R_22, ARC_R_23,
+	ARC_R_24, ARC_R_25, ARC_R_26, ARC_R_FP, ARC_R_SP, ARC_R_ILINK,
+	ARC_R_30, ARC_R_BLINK,
+	/*
+	 * Having ARC_R_IMM encoded as source register means there is an
+	 * immediate that must be interpreted from the next 4 bytes. If
+	 * encoded as the destination register though, it implies that the
+	 * output of the operation is not assigned to any register. The
+	 * latter is helpful if we only care about updating the CPU status
+	 * flags.
+	 */
+	ARC_R_IMM = 62
+};
+
+/*
+ * Remarks about the rationale behind the chosen mapping:
+ *
+ * - BPF_REG_{1,2,3,4} are the argument registers and must be mapped to
+ *   argument registers in ARCv2 ABI: r0-r7. The r7 registers is the last
+ *   argument register in the ABI. Therefore BPF_REG_5, as the fifth
+ *   argument, must be pushed onto the stack. This is a must for calling
+ *   in-kernel functions.
+ *
+ * - In ARCv2 ABI, the return value is in r0 for 32-bit results and (r1,r0)
+ *   for 64-bit results. However, because they're already used for BPF_REG_1,
+ *   the next available scratch registers, r8 and r9, are the best candidates
+ *   for BPF_REG_0. After a "call" to a(n) (in-kernel) function, the result
+ *   is "mov"ed to these registers. At a BPF_EXIT, their value is "mov"ed to
+ *   (r1,r0).
+ *   It is worth mentioning that scratch registers are the best choice for
+ *   BPF_REG_0, because it is very popular in BPF instruction encoding.
+ *
+ * - JIT_REG_TMP is an artifact needed to translate some BPF instructions.
+ *   Its life span is one single BPF instruction. Since during the
+ *   analyze_reg_usage(), it is not known if temporary registers are used,
+ *   it is mapped to ARC's scratch registers: r10 and r11. Therefore, they
+ *   don't matter in analysing phase and don't need saving. This temporary
+ *   register is added as yet another index in the bpf2arc array, so it will
+ *   unfold like the rest of registers during the code generation process.
+ *
+ * - Mapping of callee-saved BPF registers, BPF_REG_{6,7,8,9}, starts from
+ *   (r15,r14) register pair. The (r13,r12) is not a good choice, because
+ *   in ARCv2 ABI, r12 is not a callee-saved register and this can cause
+ *   problem when calling an in-kernel function. Theoretically, the mapping
+ *   could start from (r14,r13), but it is not a conventional ARCv2 register
+ *   pair. To have a future proof design, I opted for this arrangement.
+ *   If/when we decide to add ARCv2 instructions that do use register pairs,
+ *   the mapping, hopefully, doesn't need to be revisited.
+ */
+static const u8 bpf2arc[][2] = {
+	/* Return value from in-kernel function, and exit value from eBPF */
+	[BPF_REG_0] = {ARC_R_8, ARC_R_9},
+	/* Arguments from eBPF program to in-kernel function */
+	[BPF_REG_1] = {ARC_R_0, ARC_R_1},
+	[BPF_REG_2] = {ARC_R_2, ARC_R_3},
+	[BPF_REG_3] = {ARC_R_4, ARC_R_5},
+	[BPF_REG_4] = {ARC_R_6, ARC_R_7},
+	/* Remaining arguments, to be passed on the stack per 32-bit ABI */
+	[BPF_REG_5] = {ARC_R_22, ARC_R_23},
+	/* Callee-saved registers that in-kernel function will preserve */
+	[BPF_REG_6] = {ARC_R_14, ARC_R_15},
+	[BPF_REG_7] = {ARC_R_16, ARC_R_17},
+	[BPF_REG_8] = {ARC_R_18, ARC_R_19},
+	[BPF_REG_9] = {ARC_R_20, ARC_R_21},
+	/* Read-only frame pointer to access the eBPF stack. 32-bit only. */
+	[BPF_REG_FP] = {ARC_R_FP, },
+	/* Register for blinding constants */
+	[BPF_REG_AX] = {ARC_R_24, ARC_R_25},
+	/* Temporary registers for internal use */
+	[JIT_REG_TMP] = {ARC_R_10, ARC_R_11}
+};
+
+#define ARC_CALLEE_SAVED_REG_FIRST ARC_R_13
+#define ARC_CALLEE_SAVED_REG_LAST  ARC_R_25
+
+#define REG_LO(r) (bpf2arc[(r)][0])
+#define REG_HI(r) (bpf2arc[(r)][1])
+
+/*
+ * To comply with ARCv2 ABI, BPF's arg5 must be put on stack. After which,
+ * the stack needs to be restored by ARG5_SIZE.
+ */
+#define ARG5_SIZE 8
+
+/* Instruction lengths in bytes. */
+enum {
+	INSN_len_normal = 4,	/* Normal instructions length. */
+	INSN_len_imm = 4	/* Length of an extra 32-bit immediate. */
+};
+
+/* ZZ defines the size of operation in encodings that it is used. */
+enum {
+	ZZ_1_byte = 1,
+	ZZ_2_byte = 2,
+	ZZ_4_byte = 0,
+	ZZ_8_byte = 3
+};
+
+/*
+ * AA is mostly about address write back mode. It determines if the
+ * address in question should be updated before usage or after:
+ *   addr += offset; data = *addr;
+ *   data = *addr; addr += offset;
+ *
+ * In "scaling" mode, the effective address will become the sum
+ * of "address" + "index"*"size". The "size" is specified by the
+ * "ZZ" field. There is no write back when AA is set for scaling:
+ *   data = *(addr + offset<<zz)
+ */
+enum {
+	AA_none  = 0,
+	AA_pre   = 1,	/* in assembly known as "a/aw". */
+	AA_post  = 2,	/* in assembly known as "ab". */
+	AA_scale = 3	/* in assembly known as "as". */
+};
+
+/* X flag determines the mode of extension. */
+enum {
+	X_zero = 0,
+	X_sign = 1
+};
+
+/* Condition codes. */
+enum {
+	CC_always     = 0,	/* condition is true all the time */
+	CC_equal      = 1,	/* if status32.z flag is set */
+	CC_unequal    = 2,	/* if status32.z flag is clear */
+	CC_positive   = 3,	/* if status32.n flag is clear */
+	CC_negative   = 4,	/* if status32.n flag is set */
+	CC_less_u     = 5,	/* less than (unsigned) */
+	CC_less_eq_u  = 14,	/* less than or equal (unsigned) */
+	CC_great_eq_u = 6,	/* greater than or equal (unsigned) */
+	CC_great_u    = 13,	/* greater than (unsigned) */
+	CC_less_s     = 11,	/* less than (signed) */
+	CC_less_eq_s  = 12,	/* less than or equal (signed) */
+	CC_great_eq_s = 10,	/* greater than or equal (signed) */
+	CC_great_s    = 9	/* greater than (signed) */
+};
+
+#define IN_U6_RANGE(x)	((x) <= (0x40      - 1) && (x) >= 0)
+#define IN_S9_RANGE(x)	((x) <= (0x100     - 1) && (x) >= -0x100)
+#define IN_S12_RANGE(x)	((x) <= (0x800     - 1) && (x) >= -0x800)
+#define IN_S21_RANGE(x)	((x) <= (0x100000  - 1) && (x) >= -0x100000)
+#define IN_S25_RANGE(x)	((x) <= (0x1000000 - 1) && (x) >= -0x1000000)
+
+/* Operands in most of the encodings. */
+#define OP_A(x)	((x) & 0x03f)
+#define OP_B(x)	((((x) & 0x07) << 24) | (((x) & 0x38) <<  9))
+#define OP_C(x)	(((x) & 0x03f) << 6)
+#define OP_IMM	(OP_C(ARC_R_IMM))
+#define COND(x)	(OP_A((x) & 31))
+#define FLAG(x)	(((x) & 1) << 15)
+
+/*
+ * The 4-byte encoding of "mov b,c":
+ *
+ * 0010_0bbb 0000_1010 0BBB_cccc cc00_0000
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_MOV		0x200a0000
+
+/*
+ * The 4-byte encoding of "mov b,s12" (used for moving small immediates):
+ *
+ * 0010_0bbb 1000_1010 0BBB_ssss ssSS_SSSS
+ *
+ * b:  BBBbbb		destination register
+ * s:  SSSSSSssssss	source immediate (signed)
+ */
+#define OPC_MOVI	0x208a0000
+#define MOVI_S12(x)	((((x) & 0xfc0) >> 6) | (((x) & 0x3f) << 6))
+
+/*
+ * The 4-byte encoding of "mov[.qq] b,u6", used for conditional
+ * moving of even smaller immediates:
+ *
+ * 0010_0bbb 1100_1010 0BBB_cccc cciq_qqqq
+ *
+ * qq: qqqqq		condition code
+ * i:			If set, c is considered a 6-bit immediate, else a reg.
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source
+ */
+#define OPC_MOV_CC	0x20ca0000
+#define MOV_CC_I	BIT(5)
+#define OPC_MOVU_CC	(OPC_MOV_CC | MOV_CC_I)
+
+/*
+ * The 4-byte encoding of "sexb b,c" (8-bit sign extension):
+ *
+ * 0010_0bbb 0010_1111 0BBB_cccc cc00_0101
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_SEXB	0x202f0005
+
+/*
+ * The 4-byte encoding of "sexh b,c" (16-bit sign extension):
+ *
+ * 0010_0bbb 0010_1111 0BBB_cccc cc00_0110
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_SEXH	0x202f0006
+
+/*
+ * The 4-byte encoding of "ld[zz][.x][.aa] c,[b,s9]":
+ *
+ * 0001_0bbb ssss_ssss SBBB_0aaz zxcc_cccc
+ *
+ * zz:			size mode
+ * aa:			address write back mode
+ * x:			extension mode
+ *
+ * s9: S_ssss_ssss	9-bit signed number
+ * b:  BBBbbb		source reg for address
+ * c:  cccccc		destination register
+ */
+#define OPC_LOAD	0x10000000
+#define LOAD_X(x)	((x) << 6)
+#define LOAD_ZZ(x)	((x) << 7)
+#define LOAD_AA(x)	((x) << 9)
+#define LOAD_S9(x)	((((x) & 0x0ff) << 16) | (((x) & 0x100) <<  7))
+#define LOAD_C(x)	((x) & 0x03f)
+/* Unsigned and signed loads. */
+#define OPC_LDU		(OPC_LOAD | LOAD_X(X_zero))
+#define OPC_LDS		(OPC_LOAD | LOAD_X(X_sign))
+/* 32-bit load. */
+#define OPC_LD32	(OPC_LDU | LOAD_ZZ(ZZ_4_byte))
+/* "pop reg" is merely a "ld.ab reg,[sp,4]". */
+#define OPC_POP		\
+	(OPC_LD32 | LOAD_AA(AA_post) | LOAD_S9(4) | OP_B(ARC_R_SP))
+
+/*
+ * The 4-byte encoding of "st[zz][.aa] c,[b,s9]":
+ *
+ * 0001_1bbb ssss_ssss SBBB_cccc cc0a_azz0
+ *
+ * zz: zz		size mode
+ * aa: aa		address write back mode
+ *
+ * s9: S_ssss_ssss	9-bit signed number
+ * b:  BBBbbb		source reg for address
+ * c:  cccccc		source reg to be stored
+ */
+#define OPC_STORE	0x18000000
+#define STORE_ZZ(x)	((x) << 1)
+#define STORE_AA(x)	((x) << 3)
+#define STORE_S9(x)	((((x) & 0x0ff) << 16) | (((x) & 0x100) <<  7))
+/* 32-bit store. */
+#define OPC_ST32	(OPC_STORE | STORE_ZZ(ZZ_4_byte))
+/* "push reg" is merely a "st.aw reg,[sp,-4]". */
+#define OPC_PUSH	\
+	(OPC_ST32 | STORE_AA(AA_pre) | STORE_S9(-4) | OP_B(ARC_R_SP))
+
+/*
+ * The 4-byte encoding of "add a,b,c":
+ *
+ * 0010_0bbb 0i00_0000 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if flags (carry, etc.) should be updated
+ * i:			If set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_ADD		0x20000000
+/* Addition with updating the pertinent flags in "status32" register. */
+#define OPC_ADDF	(OPC_ADD | FLAG(1))
+#define ADDI		BIT(22)
+#define ADDI_U6(x)	OP_C(x)
+#define OPC_ADDI	(OPC_ADD | ADDI)
+#define OPC_ADDIF	(OPC_ADDI | FLAG(1))
+#define OPC_ADD_I	(OPC_ADD | OP_IMM)
+
+/*
+ * The 4-byte encoding of "adc a,b,c" (addition with carry):
+ *
+ * 0010_0bbb 0i00_0001 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_ADC		0x20010000
+#define ADCI		BIT(22)
+#define ADCI_U6(x)	OP_C(x)
+#define OPC_ADCI	(OPC_ADC | ADCI)
+
+/*
+ * The 4-byte encoding of "sub a,b,c":
+ *
+ * 0010_0bbb 0i00_0010 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if flags (carry, etc.) should be updated
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_SUB		0x20020000
+/* Subtraction with updating the pertinent flags in "status32" register. */
+#define OPC_SUBF	(OPC_SUB | FLAG(1))
+#define SUBI		BIT(22)
+#define SUBI_U6(x)	OP_C(x)
+#define OPC_SUBI	(OPC_SUB | SUBI)
+#define OPC_SUB_I	(OPC_SUB | OP_IMM)
+
+/*
+ * The 4-byte encoding of "sbc a,b,c" (subtraction with carry):
+ *
+ * 0010_0bbb 0000_0011 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if flags (carry, etc.) should be updated
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_SBC		0x20030000
+
+/*
+ * The 4-byte encoding of "cmp[.qq] b,c":
+ *
+ * 0010_0bbb 1100_1100 1BBB_cccc cc0q_qqqq
+ *
+ * qq:	qqqqq		condition code
+ *
+ * b:  BBBbbb		the 1st operand
+ * c:  cccccc		the 2nd operand
+ */
+#define OPC_CMP		0x20cc8000
+
+/*
+ * The 4-byte encoding of "neg a,b":
+ *
+ * 0010_0bbb 0100_1110 0BBB_0000 00aa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		input
+ */
+#define OPC_NEG		0x204e0000
+
+/*
+ * The 4-byte encoding of "mpy a,b,c".
+ * mpy is the signed 32-bit multiplication with the lower 32-bit
+ * of the product as the result.
+ *
+ * 0010_0bbb 0001_1010 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_MPY		0x201a0000
+#define OPC_MPYI	(OPC_MPY | OP_IMM)
+
+/*
+ * The 4-byte encoding of "mpydu a,b,c".
+ * mpydu is the unsigned 32-bit multiplication with the lower 32-bit of
+ * the product in register "a" and the higher 32-bit in register "a+1".
+ *
+ * 0010_1bbb 0001_1001 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		64-bit result in registers (R_a+1,R_a)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_MPYDU	0x28190000
+#define OPC_MPYDUI	(OPC_MPYDU | OP_IMM)
+
+/*
+ * The 4-byte encoding of "divu a,b,c" (unsigned division):
+ *
+ * 0010_1bbb 0000_0101 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (quotient)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_DIVU	0x28050000
+#define OPC_DIVUI	(OPC_DIVU | OP_IMM)
+
+/*
+ * The 4-byte encoding of "div a,b,c" (signed division):
+ *
+ * 0010_1bbb 0000_0100 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (quotient)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_DIVS	0x28040000
+#define OPC_DIVSI	(OPC_DIVS | OP_IMM)
+
+/*
+ * The 4-byte encoding of "remu a,b,c" (unsigned remainder):
+ *
+ * 0010_1bbb 0000_1001 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (remainder)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_REMU	0x28090000
+#define OPC_REMUI	(OPC_REMU | OP_IMM)
+
+/*
+ * The 4-byte encoding of "rem a,b,c" (signed remainder):
+ *
+ * 0010_1bbb 0000_1000 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result (remainder)
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand (divisor)
+ */
+#define OPC_REMS	0x28080000
+#define OPC_REMSI	(OPC_REMS | OP_IMM)
+
+/*
+ * The 4-byte encoding of "and a,b,c":
+ *
+ * 0010_0bbb 0000_0100 fBBB_cccc ccaa_aaaa
+ *
+ * f:                   indicates if zero and negative flags should be updated
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_AND		0x20040000
+#define OPC_ANDI	(OPC_AND | OP_IMM)
+
+/*
+ * The 4-byte encoding of "tst[.qq] b,c".
+ * Checks if the two input operands have any bit set at the same
+ * position.
+ *
+ * 0010_0bbb 1100_1011 1BBB_cccc cc0q_qqqq
+ *
+ * qq:	qqqqq		condition code
+ *
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_TST		0x20cb8000
+
+/*
+ * The 4-byte encoding of "or a,b,c":
+ *
+ * 0010_0bbb 0000_0101 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_OR		0x20050000
+#define OPC_ORI		(OPC_OR | OP_IMM)
+
+/*
+ * The 4-byte encoding of "xor a,b,c":
+ *
+ * 0010_0bbb 0000_0111 0BBB_cccc ccaa_aaaa
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		the 1st input operand
+ * c:  cccccc		the 2nd input operand
+ */
+#define OPC_XOR		0x20070000
+#define OPC_XORI	(OPC_XOR | OP_IMM)
+
+/*
+ * The 4-byte encoding of "not b,c":
+ *
+ * 0010_0bbb 0010_1111 0BBB_cccc cc00_1010
+ *
+ * b:  BBBbbb		result
+ * c:  cccccc		input
+ */
+#define OPC_NOT		0x202f000a
+
+/*
+ * The 4-byte encoding of "btst b,u6":
+ *
+ * 0010_0bbb 0101_0001 1BBB_uuuu uu00_0000
+ *
+ * b:  BBBbbb		input number to check
+ * u6: uuuuuu		6-bit unsigned number specifying bit position to check
+ */
+#define OPC_BTSTU6	0x20518000
+#define BTST_U6(x)	(OP_C((x) & 63))
+
+/*
+ * The 4-byte encoding of "asl[.qq] b,b,c" (arithmetic shift left):
+ *
+ * 0010_1bbb 0i00_0000 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 5-bit immediate, else a reg.
+ *
+ * b:  BBBbbb		result and the first operand (number to be shifted)
+ * c:  cccccc		amount to be shifted
+ */
+#define OPC_ASL		0x28000000
+#define ASL_I		BIT(22)
+#define ASLI_U6(x)	OP_C((x) & 31)
+#define OPC_ASLI	(OPC_ASL | ASL_I)
+
+/*
+ * The 4-byte encoding of "asr a,b,c" (arithmetic shift right):
+ *
+ * 0010_1bbb 0i00_0010 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		first input:  number to be shifted
+ * c:  cccccc		second input: amount to be shifted
+ */
+#define OPC_ASR		0x28020000
+#define ASR_I		ASL_I
+#define ASRI_U6(x)	ASLI_U6(x)
+#define OPC_ASRI	(OPC_ASR | ASR_I)
+
+/*
+ * The 4-byte encoding of "lsr a,b,c" (logical shift right):
+ *
+ * 0010_1bbb 0i00_0001 0BBB_cccc ccaa_aaaa
+ *
+ * i:			if set, c is considered a 6-bit immediate, else a reg.
+ *
+ * a:  aaaaaa		result
+ * b:  BBBbbb		first input:  number to be shifted
+ * c:  cccccc		second input: amount to be shifted
+ */
+#define OPC_LSR		0x28010000
+#define LSR_I		ASL_I
+#define LSRI_U6(x)	ASLI_U6(x)
+#define OPC_LSRI	(OPC_LSR | LSR_I)
+
+/*
+ * The 4-byte encoding of "swape b,c":
+ *
+ * 0010_1bbb 0010_1111 0bbb_cccc cc00_1001
+ *
+ * b:  BBBbbb		destination register
+ * c:  cccccc		source register
+ */
+#define OPC_SWAPE	0x282f0009
+
+/*
+ * Encoding for jump to an address in register:
+ * j reg_c
+ *
+ * 0010_0000 1110_0000 0000_cccc cc00_0000
+ *
+ * c:  cccccc		register holding the destination address
+ */
+#define OPC_JMP		0x20e00000
+/* Jump to "branch-and-link" register, which effectively is a "return". */
+#define OPC_J_BLINK	(OPC_JMP | OP_C(ARC_R_BLINK))
+
+/*
+ * Encoding for jump-and-link to an address in register:
+ * jl reg_c
+ *
+ * 0010_0000 0010_0010 0000_cccc cc00_0000
+ *
+ * c:  cccccc		register holding the destination address
+ */
+#define OPC_JL		0x20220000
+
+/*
+ * Encoding for (conditional) branch to an offset from the current location
+ * that is word aligned: (PC & 0xffff_fffc) + s21
+ * B[qq] s21
+ *
+ * 0000_0sss ssss_sss0 SSSS_SSSS SS0q_qqqq
+ *
+ * qq:	qqqqq				condition code
+ * s21:	SSSS SSSS_SSss ssss_ssss	The displacement (21-bit signed)
+ *
+ * The displacement is supposed to be 16-bit (2-byte) aligned. Therefore,
+ * it should be a multiple of 2. Hence, there is an implied '0' bit at its
+ * LSB: S_SSSS SSSS_Ssss ssss_sss0
+ */
+#define OPC_BCC		0x00000000
+#define BCC_S21(d)	((((d) & 0x7fe) << 16) | (((d) & 0x1ff800) >> 5))
+
+/*
+ * Encoding for unconditional branch to an offset from the current location
+ * that is word aligned: (PC & 0xffff_fffc) + s25
+ * B s25
+ *
+ * 0000_0sss ssss_sss1 SSSS_SSSS SS00_TTTT
+ *
+ * s25:	TTTT SSSS SSSS_SSss ssss_ssss	The displacement (25-bit signed)
+ *
+ * The displacement is supposed to be 16-bit (2-byte) aligned. Therefore,
+ * it should be a multiple of 2. Hence, there is an implied '0' bit at its
+ * LSB: T TTTS_SSSS SSSS_Ssss ssss_sss0
+ */
+#define OPC_B		0x00010000
+#define B_S25(d)	((((d) & 0x1e00000) >> 21) | BCC_S21(d))
+
+static inline void emit_2_bytes(u8 *buf, u16 bytes)
+{
+	*((u16 *)buf) = bytes;
+}
+
+static inline void emit_4_bytes(u8 *buf, u32 bytes)
+{
+	emit_2_bytes(buf, bytes >> 16);
+	emit_2_bytes(buf + 2, bytes & 0xffff);
+}
+
+static inline u8 bpf_to_arc_size(u8 size)
+{
+	switch (size) {
+	case BPF_B:
+		return ZZ_1_byte;
+	case BPF_H:
+		return ZZ_2_byte;
+	case BPF_W:
+		return ZZ_4_byte;
+	case BPF_DW:
+		return ZZ_8_byte;
+	default:
+		return ZZ_4_byte;
+	}
+}
+
+/************** Encoders (Deal with ARC regs) ************/
+
+/* Move an immediate to register with a 4-byte instruction. */
+static u8 arc_movi_r(u8 *buf, u8 reg, s16 imm)
+{
+	const u32 insn = OPC_MOVI | OP_B(reg) | MOVI_S12(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* rd <- rs */
+static u8 arc_mov_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_MOV | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* The emitted code may have different sizes based on "imm". */
+static u8 arc_mov_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_MOV | OP_B(rd) | OP_IMM;
+
+	if (IN_S12_RANGE(imm))
+		return arc_movi_r(buf, rd, imm);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* The emitted code will always have the same size (8). */
+static u8 arc_mov_i_fixed(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_MOV | OP_B(rd) | OP_IMM;
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* Conditional move. */
+static u8 arc_mov_cc_r(u8 *buf, u8 cc, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_MOV_CC | OP_B(rd) | OP_C(rs) | COND(cc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* Conditional move of a small immediate to rd. */
+static u8 arc_movu_cc_r(u8 *buf, u8 cc, u8 rd, u8 imm)
+{
+	const u32 insn = OPC_MOVU_CC | OP_B(rd) | OP_C(imm) | COND(cc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* Sign extension from a byte. */
+static u8 arc_sexb_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_SEXB | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* Sign extension from two bytes. */
+static u8 arc_sexh_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_SEXH | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* st reg, [reg_mem, off] */
+static u8 arc_st_r(u8 *buf, u8 reg, u8 reg_mem, s16 off, u8 zz)
+{
+	const u32 insn = OPC_STORE | STORE_ZZ(zz) | OP_C(reg) |
+		OP_B(reg_mem) | STORE_S9(off);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* st.aw reg, [sp, -4] */
+static u8 arc_push_r(u8 *buf, u8 reg)
+{
+	const u32 insn = OPC_PUSH | OP_C(reg);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* ld reg, [reg_mem, off] (unsigned) */
+static u8 arc_ld_r(u8 *buf, u8 reg, u8 reg_mem, s16 off, u8 zz)
+{
+	const u32 insn = OPC_LDU | LOAD_ZZ(zz) | LOAD_C(reg) |
+		OP_B(reg_mem) | LOAD_S9(off);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* ld.x reg, [reg_mem, off] (sign extend) */
+static u8 arc_ldx_r(u8 *buf, u8 reg, u8 reg_mem, s16 off, u8 zz)
+{
+	const u32 insn = OPC_LDS | LOAD_ZZ(zz) | LOAD_C(reg) |
+		OP_B(reg_mem) | LOAD_S9(off);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* ld.ab reg,[sp,4] */
+static u8 arc_pop_r(u8 *buf, u8 reg)
+{
+	const u32 insn = OPC_POP | LOAD_C(reg);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add Ra,Ra,Rc */
+static u8 arc_add_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_ADD | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add.f Ra,Ra,Rc */
+static u8 arc_addf_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_ADDF | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add.f Ra,Ra,u6 */
+static u8 arc_addif_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_ADDIF | OP_A(ra) | OP_B(ra) | ADDI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add Ra,Ra,u6 */
+static u8 arc_addi_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_ADDI | OP_A(ra) | OP_B(ra) | ADDI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* add Ra,Rb,imm */
+static u8 arc_add_i(u8 *buf, u8 ra, u8 rb, s32 imm)
+{
+	const u32 insn = OPC_ADD_I | OP_A(ra) | OP_B(rb);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* adc Ra,Ra,Rc */
+static u8 arc_adc_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_ADC | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* adc Ra,Ra,u6 */
+static u8 arc_adci_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_ADCI | OP_A(ra) | OP_B(ra) | ADCI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub Ra,Ra,Rc */
+static u8 arc_sub_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_SUB | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub.f Ra,Ra,Rc */
+static u8 arc_subf_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_SUBF | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub Ra,Ra,u6 */
+static u8 arc_subi_r(u8 *buf, u8 ra, u8 u6)
+{
+	const u32 insn = OPC_SUBI | OP_A(ra) | OP_B(ra) | SUBI_U6(u6);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* sub Ra,Ra,imm */
+static u8 arc_sub_i(u8 *buf, u8 ra, s32 imm)
+{
+	const u32 insn = OPC_SUB_I | OP_A(ra) | OP_B(ra);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* sbc Ra,Ra,Rc */
+static u8 arc_sbc_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_SBC | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* cmp Rb,Rc */
+static u8 arc_cmp_r(u8 *buf, u8 rb, u8 rc)
+{
+	const u32 insn = OPC_CMP | OP_B(rb) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * cmp.z Rb,Rc
+ *
+ * This "cmp.z" variant of compare instruction is used on lower
+ * 32-bits of register pairs after "cmp"ing their upper parts. If the
+ * upper parts are equal (z), then this one will proceed to check the
+ * rest.
+ */
+static u8 arc_cmpz_r(u8 *buf, u8 rb, u8 rc)
+{
+	const u32 insn = OPC_CMP | OP_B(rb) | OP_C(rc) | CC_equal;
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* neg Ra,Rb */
+static u8 arc_neg_r(u8 *buf, u8 ra, u8 rb)
+{
+	const u32 insn = OPC_NEG | OP_A(ra) | OP_B(rb);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* mpy Ra,Rb,Rc */
+static u8 arc_mpy_r(u8 *buf, u8 ra, u8 rb, u8 rc)
+{
+	const u32 insn = OPC_MPY | OP_A(ra) | OP_B(rb) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* mpy Ra,Rb,imm */
+static u8 arc_mpy_i(u8 *buf, u8 ra, u8 rb, s32 imm)
+{
+	const u32 insn = OPC_MPYI | OP_A(ra) | OP_B(rb);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* mpydu Ra,Ra,Rc */
+static u8 arc_mpydu_r(u8 *buf, u8 ra, u8 rc)
+{
+	const u32 insn = OPC_MPYDU | OP_A(ra) | OP_B(ra) | OP_C(rc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* mpydu Ra,Ra,imm */
+static u8 arc_mpydu_i(u8 *buf, u8 ra, s32 imm)
+{
+	const u32 insn = OPC_MPYDUI | OP_A(ra) | OP_B(ra);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* divu Rd,Rd,Rs */
+static u8 arc_divu_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_DIVU | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* divu Rd,Rd,imm */
+static u8 arc_divu_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_DIVUI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* div Rd,Rd,Rs */
+static u8 arc_divs_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_DIVS | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* div Rd,Rd,imm */
+static u8 arc_divs_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_DIVSI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* remu Rd,Rd,Rs */
+static u8 arc_remu_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_REMU | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* remu Rd,Rd,imm */
+static u8 arc_remu_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_REMUI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* rem Rd,Rd,Rs */
+static u8 arc_rems_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_REMS | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* rem Rd,Rd,imm */
+static u8 arc_rems_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_REMSI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* and Rd,Rd,Rs */
+static u8 arc_and_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_AND | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/* and Rd,Rd,limm */
+static u8 arc_and_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_ANDI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+/* tst Rd,Rs */
+static u8 arc_tst_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_TST | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * This particular version, "tst.z ...", is meant to be used after a
+ * "tst" on the low 32-bit of register pairs. If that "tst" is not
+ * zero, then we don't need to test the upper 32-bits lest it sets
+ * the zero flag.
+ */
+static u8 arc_tstz_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_TST | OP_B(rd) | OP_C(rs) | CC_equal;
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_or_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_OR | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_or_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_ORI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+static u8 arc_xor_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_XOR | OP_A(rd) | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_xor_i(u8 *buf, u8 rd, s32 imm)
+{
+	const u32 insn = OPC_XORI | OP_A(rd) | OP_B(rd);
+
+	if (buf) {
+		emit_4_bytes(buf, insn);
+		emit_4_bytes(buf + INSN_len_normal, imm);
+	}
+	return INSN_len_normal + INSN_len_imm;
+}
+
+static u8 arc_not_r(u8 *buf, u8 rd, u8 rs)
+{
+	const u32 insn = OPC_NOT | OP_B(rd) | OP_C(rs);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_btst_i(u8 *buf, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_BTSTU6 | OP_B(rs) | BTST_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asl_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_ASL | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asli_r(u8 *buf, u8 rd, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_ASLI | OP_A(rd) | OP_B(rs) | ASLI_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asr_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_ASR | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_asri_r(u8 *buf, u8 rd, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_ASRI | OP_A(rd) | OP_B(rs) | ASRI_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_lsr_r(u8 *buf, u8 rd, u8 rs1, u8 rs2)
+{
+	const u32 insn = OPC_LSR | OP_A(rd) | OP_B(rs1) | OP_C(rs2);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_lsri_r(u8 *buf, u8 rd, u8 rs, u8 imm)
+{
+	const u32 insn = OPC_LSRI | OP_A(rd) | OP_B(rs) | LSRI_U6(imm);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_swape_r(u8 *buf, u8 r)
+{
+	const u32 insn = OPC_SWAPE | OP_B(r) | OP_C(r);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+static u8 arc_jmp_return(u8 *buf)
+{
+	if (buf)
+		emit_4_bytes(buf, OPC_J_BLINK);
+	return INSN_len_normal;
+}
+
+static u8 arc_jl(u8 *buf, u8 reg)
+{
+	const u32 insn = OPC_JL | OP_C(reg);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * Conditional jump to an address that is max 21 bits away (signed).
+ *
+ * b<cc> s21
+ */
+static u8 arc_bcc(u8 *buf, u8 cc, int offset)
+{
+	const u32 insn = OPC_BCC | BCC_S21(offset) | COND(cc);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/*
+ * Unconditional jump to an address that is max 25 bits away (signed).
+ *
+ * b     s25
+ */
+static u8 arc_b(u8 *buf, s32 offset)
+{
+	const u32 insn = OPC_B | B_S25(offset);
+
+	if (buf)
+		emit_4_bytes(buf, insn);
+	return INSN_len_normal;
+}
+
+/************* Packers (Deal with BPF_REGs) **************/
+
+u8 zext(u8 *buf, u8 rd)
+{
+	if (rd != BPF_REG_FP)
+		return arc_movi_r(buf, REG_HI(rd), 0);
+	else
+		return 0;
+}
+
+u8 mov_r32(u8 *buf, u8 rd, u8 rs, u8 sign_ext)
+{
+	u8 len = 0;
+
+	if (sign_ext) {
+		if (sign_ext == 8)
+			len = arc_sexb_r(buf, REG_LO(rd), REG_LO(rs));
+		else if (sign_ext == 16)
+			len = arc_sexh_r(buf, REG_LO(rd), REG_LO(rs));
+		else if (sign_ext == 32 && rd != rs)
+			len = arc_mov_r(buf, REG_LO(rd), REG_LO(rs));
+
+		return len;
+	}
+
+	/* Unsigned move. */
+
+	if (rd != rs)
+		len = arc_mov_r(buf, REG_LO(rd), REG_LO(rs));
+
+	return len;
+}
+
+u8 mov_r32_i32(u8 *buf, u8 reg, s32 imm)
+{
+	return arc_mov_i(buf, REG_LO(reg), imm);
+}
+
+u8 mov_r64(u8 *buf, u8 rd, u8 rs, u8 sign_ext)
+{
+	u8 len = 0;
+
+	if (sign_ext) {
+		/* First handle the low 32-bit part. */
+		len = mov_r32(buf, rd, rs, sign_ext);
+
+		/* Now propagate the sign bit of LO to HI. */
+		if (sign_ext == 8 || sign_ext == 16 || sign_ext == 32) {
+			len += arc_asri_r(BUF(buf, len),
+					  REG_HI(rd), REG_LO(rd), 31);
+		}
+
+		return len;
+	}
+
+	/* Unsigned move. */
+
+	if (rd == rs)
+		return 0;
+
+	len = arc_mov_r(buf, REG_LO(rd), REG_LO(rs));
+
+	if (rs != BPF_REG_FP)
+		len += arc_mov_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	/* BPF_REG_FP is mapped to 32-bit "fp" register. */
+	else
+		len += arc_movi_r(BUF(buf, len), REG_HI(rd), 0);
+
+	return len;
+}
+
+/* Sign extend the 32-bit immediate into 64-bit register pair. */
+u8 mov_r64_i32(u8 *buf, u8 reg, s32 imm)
+{
+	u8 len = 0;
+
+	len = arc_mov_i(buf, REG_LO(reg), imm);
+
+	/* BPF_REG_FP is mapped to 32-bit "fp" register. */
+	if (reg != BPF_REG_FP) {
+		if (imm >= 0)
+			len += arc_movi_r(BUF(buf, len), REG_HI(reg), 0);
+		else
+			len += arc_movi_r(BUF(buf, len), REG_HI(reg), -1);
+	}
+
+	return len;
+}
+
+/*
+ * This is merely used for translation of "LD R, IMM64" instructions
+ * of the BPF. These sort of instructions are sometimes used for
+ * relocations. If during the normal pass, the relocation value is
+ * not known, the BPF instruction may look something like:
+ *
+ * LD R <- 0x0000_0001_0000_0001
+ *
+ * Which will nicely translate to two 4-byte ARC instructions:
+ *
+ * mov R_lo, 1               # imm is small enough to be s12
+ * mov R_hi, 1               # same
+ *
+ * However, during the extra pass, the IMM64 will have changed
+ * to the resolved address and looks something like:
+ *
+ * LD R <- 0x0000_0000_1234_5678
+ *
+ * Now, the translated code will require 12 bytes:
+ *
+ * mov R_lo, 0x12345678      # this is an 8-byte instruction
+ * mov R_hi, 0               # still 4 bytes
+ *
+ * Which in practice will result in overwriting the following
+ * instruction. To avoid such cases, we will always emit codes
+ * with fixed sizes.
+ */
+u8 mov_r64_i64(u8 *buf, u8 reg, u32 lo, u32 hi)
+{
+	u8 len;
+
+	len  = arc_mov_i_fixed(buf, REG_LO(reg), lo);
+	len += arc_mov_i_fixed(BUF(buf, len), REG_HI(reg), hi);
+
+	return len;
+}
+
+/*
+ * If the "off"set is too big (doesn't encode as S9) for:
+ *
+ *   {ld,st}  r, [rm, off]
+ *
+ * Then emit:
+ *
+ *   add r10, REG_LO(rm), off
+ *
+ * and make sure that r10 becomes the effective address:
+ *
+ *   {ld,st}  r, [r10, 0]
+ */
+static u8 adjust_mem_access(u8 *buf, s16 *off, u8 size,
+			    u8 rm, u8 *arc_reg_mem)
+{
+	u8 len = 0;
+	*arc_reg_mem = REG_LO(rm);
+
+	if (!IN_S9_RANGE(*off) ||
+	    (size == BPF_DW && !IN_S9_RANGE(*off + 4))) {
+		len += arc_add_i(BUF(buf, len),
+				 REG_LO(JIT_REG_TMP), REG_LO(rm), (u32)(*off));
+		*arc_reg_mem = REG_LO(JIT_REG_TMP);
+		*off = 0;
+	}
+
+	return len;
+}
+
+/* store rs, [rd, off] */
+u8 store_r(u8 *buf, u8 rs, u8 rd, s16 off, u8 size)
+{
+	u8 len, arc_reg_mem;
+
+	len = adjust_mem_access(buf, &off, size, rd, &arc_reg_mem);
+
+	if (size == BPF_DW) {
+		len += arc_st_r(BUF(buf, len), REG_LO(rs), arc_reg_mem,
+				off, ZZ_4_byte);
+		len += arc_st_r(BUF(buf, len), REG_HI(rs), arc_reg_mem,
+				off + 4, ZZ_4_byte);
+	} else {
+		u8 zz = bpf_to_arc_size(size);
+
+		len += arc_st_r(BUF(buf, len), REG_LO(rs), arc_reg_mem,
+				off, zz);
+	}
+
+	return len;
+}
+
+/*
+ * For {8,16,32}-bit stores:
+ *   mov r21, imm
+ *   st  r21, [...]
+ * For 64-bit stores:
+ *   mov r21, imm
+ *   st  r21, [...]
+ *   mov r21, {0,-1}
+ *   st  r21, [...+4]
+ */
+u8 store_i(u8 *buf, s32 imm, u8 rd, s16 off, u8 size)
+{
+	u8 len, arc_reg_mem;
+	/* REG_LO(JIT_REG_TMP) might be used by "adjust_mem_access()". */
+	const u8 arc_rs = REG_HI(JIT_REG_TMP);
+
+	len = adjust_mem_access(buf, &off, size, rd, &arc_reg_mem);
+
+	if (size == BPF_DW) {
+		len += arc_mov_i(BUF(buf, len), arc_rs, imm);
+		len += arc_st_r(BUF(buf, len), arc_rs, arc_reg_mem,
+				off, ZZ_4_byte);
+		imm = (imm >= 0 ? 0 : -1);
+		len += arc_mov_i(BUF(buf, len), arc_rs, imm);
+		len += arc_st_r(BUF(buf, len), arc_rs, arc_reg_mem,
+				off + 4, ZZ_4_byte);
+	} else {
+		u8 zz = bpf_to_arc_size(size);
+
+		len += arc_mov_i(BUF(buf, len), arc_rs, imm);
+		len += arc_st_r(BUF(buf, len), arc_rs, arc_reg_mem, off, zz);
+	}
+
+	return len;
+}
+
+/*
+ * For the calling convention of a little endian machine, the LO part
+ * must be on top of the stack.
+ */
+static u8 push_r64(u8 *buf, u8 reg)
+{
+	u8 len = 0;
+
+#ifdef __LITTLE_ENDIAN
+	/* BPF_REG_FP is mapped to 32-bit "fp" register. */
+	if (reg != BPF_REG_FP)
+		len += arc_push_r(BUF(buf, len), REG_HI(reg));
+	len += arc_push_r(BUF(buf, len), REG_LO(reg));
+#else
+	len += arc_push_r(BUF(buf, len), REG_LO(reg));
+	if (reg != BPF_REG_FP)
+		len += arc_push_r(BUF(buf, len), REG_HI(reg));
+#endif
+
+	return len;
+}
+
+/* load rd, [rs, off] */
+u8 load_r(u8 *buf, u8 rd, u8 rs, s16 off, u8 size, bool sign_ext)
+{
+	u8 len, arc_reg_mem;
+
+	len = adjust_mem_access(buf, &off, size, rs, &arc_reg_mem);
+
+	if (size == BPF_B || size == BPF_H || size == BPF_W) {
+		const u8 zz = bpf_to_arc_size(size);
+
+		/* Use LD.X only if the data size is less than 32-bit. */
+		if (sign_ext && (zz == ZZ_1_byte || zz == ZZ_2_byte)) {
+			len += arc_ldx_r(BUF(buf, len), REG_LO(rd),
+					 arc_reg_mem, off, zz);
+		} else {
+			len += arc_ld_r(BUF(buf, len), REG_LO(rd),
+					arc_reg_mem, off, zz);
+		}
+
+		if (sign_ext) {
+			/* Propagate the sign bit to the higher reg. */
+			len += arc_asri_r(BUF(buf, len),
+					  REG_HI(rd), REG_LO(rd), 31);
+		} else {
+			len += arc_movi_r(BUF(buf, len), REG_HI(rd), 0);
+		}
+	} else if (size == BPF_DW) {
+		/*
+		 * We are about to issue 2 consecutive loads:
+		 *
+		 *   ld rx, [rb, off+0]
+		 *   ld ry, [rb, off+4]
+		 *
+		 * If "rx" and "rb" are the same registers, then the order
+		 * should change to guarantee that "rb" remains intact
+		 * during these 2 operations:
+		 *
+		 *   ld ry, [rb, off+4]
+		 *   ld rx, [rb, off+0]
+		 */
+		if (REG_LO(rd) != arc_reg_mem) {
+			len += arc_ld_r(BUF(buf, len), REG_LO(rd), arc_reg_mem,
+					off, ZZ_4_byte);
+			len += arc_ld_r(BUF(buf, len), REG_HI(rd), arc_reg_mem,
+					off + 4, ZZ_4_byte);
+		} else {
+			len += arc_ld_r(BUF(buf, len), REG_HI(rd), arc_reg_mem,
+					off + 4, ZZ_4_byte);
+			len += arc_ld_r(BUF(buf, len), REG_LO(rd), arc_reg_mem,
+					off, ZZ_4_byte);
+		}
+	}
+
+	return len;
+}
+
+u8 add_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_add_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 add_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	if (IN_U6_RANGE(imm))
+		return arc_addi_r(buf, REG_LO(rd), imm);
+	else
+		return arc_add_i(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+u8 add_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_addf_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_adc_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 add_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	if (IN_U6_RANGE(imm)) {
+		len  = arc_addif_r(buf, REG_LO(rd), imm);
+		len += arc_adci_r(BUF(buf, len), REG_HI(rd), 0);
+	} else {
+		len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+		len += add_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	}
+	return len;
+}
+
+u8 sub_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_sub_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 sub_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	if (IN_U6_RANGE(imm))
+		return arc_subi_r(buf, REG_LO(rd), imm);
+	else
+		return arc_sub_i(buf, REG_LO(rd), imm);
+}
+
+u8 sub_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_subf_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_sbc_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 sub_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += sub_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+static u8 cmp_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_cmp_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 neg_r32(u8 *buf, u8 r)
+{
+	return arc_neg_r(buf, REG_LO(r), REG_LO(r));
+}
+
+/* In a two's complement system, -r is (~r + 1). */
+u8 neg_r64(u8 *buf, u8 r)
+{
+	u8 len;
+
+	len  = arc_not_r(buf, REG_LO(r), REG_LO(r));
+	len += arc_not_r(BUF(buf, len), REG_HI(r), REG_HI(r));
+	len += add_r64_i32(BUF(buf, len), r, 1);
+	return len;
+}
+
+u8 mul_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_mpy_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 mul_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_mpy_i(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * MUL B, C
+ * --------
+ * mpy       t0, B_hi, C_lo
+ * mpy       t1, B_lo, C_hi
+ * mpydu   B_lo, B_lo, C_lo
+ * add     B_hi, B_hi,   t0
+ * add     B_hi, B_hi,   t1
+ */
+u8 mul_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 C_hi = REG_HI(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_mpy_r(buf, t0, B_hi, C_lo);
+	len += arc_mpy_r(BUF(buf, len), t1, B_lo, C_hi);
+	len += arc_mpydu_r(BUF(buf, len), B_lo, C_lo);
+	len += arc_add_r(BUF(buf, len), B_hi, t0);
+	len += arc_add_r(BUF(buf, len), B_hi, t1);
+
+	return len;
+}
+
+/*
+ * MUL B, imm
+ * ----------
+ *
+ *  To get a 64-bit result from a signed 64x32 multiplication:
+ *
+ *         B_hi             B_lo   *
+ *         sign             imm
+ *  -----------------------------
+ *  HI(B_lo*imm)     LO(B_lo*imm)  +
+ *     B_hi*imm                    +
+ *     B_lo*sign
+ *  -----------------------------
+ *        res_hi           res_lo
+ *
+ * mpy     t1, B_lo, sign(imm)
+ * mpy     t0, B_hi, imm
+ * mpydu B_lo, B_lo, imm
+ * add   B_hi, B_hi,  t0
+ * add   B_hi, B_hi,  t1
+ *
+ * Note: We can't use signed double multiplication, "mpyd", instead of an
+ * unsigned version, "mpydu", and then get rid of the sign adjustments
+ * calculated in "t1". The signed multiplication, "mpyd", will consider
+ * both operands, "B_lo" and "imm", as signed inputs. However, for this
+ * 64x32 multiplication, "B_lo" must be treated as an unsigned number.
+ */
+u8 mul_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len = 0;
+
+	if (imm == 1)
+		return 0;
+
+	/* Is the sign-extension of the immediate "-1"? */
+	if (imm < 0)
+		len += arc_neg_r(BUF(buf, len), t1, B_lo);
+
+	len += arc_mpy_i(BUF(buf, len), t0, B_hi, imm);
+	len += arc_mpydu_i(BUF(buf, len), B_lo, imm);
+	len += arc_add_r(BUF(buf, len), B_hi, t0);
+
+	/* Add the "sign*B_lo" part, if necessary. */
+	if (imm < 0)
+		len += arc_add_r(BUF(buf, len), B_hi, t1);
+
+	return len;
+}
+
+u8 div_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext)
+{
+	if (sign_ext)
+		return arc_divs_r(buf, REG_LO(rd), REG_LO(rs));
+	else
+		return arc_divu_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 div_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext)
+{
+	if (imm == 0)
+		return 0;
+
+	if (sign_ext)
+		return arc_divs_i(buf, REG_LO(rd), imm);
+	else
+		return arc_divu_i(buf, REG_LO(rd), imm);
+}
+
+u8 mod_r32(u8 *buf, u8 rd, u8 rs, bool sign_ext)
+{
+	if (sign_ext)
+		return arc_rems_r(buf, REG_LO(rd), REG_LO(rs));
+	else
+		return arc_remu_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 mod_r32_i32(u8 *buf, u8 rd, s32 imm, bool sign_ext)
+{
+	if (imm == 0)
+		return 0;
+
+	if (sign_ext)
+		return arc_rems_i(buf, REG_LO(rd), imm);
+	else
+		return arc_remu_i(buf, REG_LO(rd), imm);
+}
+
+u8 and_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_and_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 and_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_and_i(buf, REG_LO(rd), imm);
+}
+
+u8 and_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_and_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_and_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 and_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += and_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+static u8 tst_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_tst_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 or_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_or_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 or_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_or_i(buf, REG_LO(rd), imm);
+}
+
+u8 or_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_or_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+	len += arc_or_r(BUF(buf, len), REG_HI(rd), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 or_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += or_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+u8 xor_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_xor_r(buf, REG_LO(rd), REG_LO(rs));
+}
+
+u8 xor_r32_i32(u8 *buf, u8 rd, s32 imm)
+{
+	return arc_xor_i(buf, REG_LO(rd), imm);
+}
+
+u8 xor_r64(u8 *buf, u8 rd, u8 rs)
+{
+	u8 len;
+
+	len  = arc_xor_r(buf, REG_LO(rd), REG_LO(rs));
+	len += arc_xor_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	return len;
+}
+
+u8 xor_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	u8 len;
+
+	len  = mov_r64_i32(buf, JIT_REG_TMP, imm);
+	len += xor_r64(BUF(buf, len), rd, JIT_REG_TMP);
+	return len;
+}
+
+/* "asl a,b,c" --> "a = (b << (c & 31))". */
+u8 lsh_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_asl_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 lsh_r32_i32(u8 *buf, u8 rd, u8 imm)
+{
+	return arc_asli_r(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * algorithm
+ * ---------
+ * if (n <= 32)
+ *   to_hi = lo >> (32-n)   # (32-n) is the negate of "n" in a 5-bit width.
+ *   lo <<= n
+ *   hi <<= n
+ *   hi |= to_hi
+ * else
+ *   hi = lo << (n-32)
+ *   lo = 0
+ *
+ * assembly translation for "LSH B, C"
+ * (heavily influenced by ARC gcc)
+ * -----------------------------------
+ * not    t0, C_lo            # The first 3 lines are almost the same as:
+ * lsr    t1, B_lo, 1         #   neg   t0, C_lo
+ * lsr    t1, t1, t0          #   lsr   t1, B_lo, t0   --> t1 is "to_hi"
+ * mov    t0, C_lo*           # with one important difference. In "neg"
+ * asl    B_lo, B_lo, t0      # version, when C_lo=0, t1 becomes B_lo while
+ * asl    B_hi, B_hi, t0      # it should be 0. The "not" approach instead,
+ * or     B_hi, B_hi, t1      # "shift"s t1 once and 31 times, practically
+ * btst   t0, 5               # setting it to 0 when C_lo=0.
+ * mov.ne B_hi, B_lo**
+ * mov.ne B_lo, 0
+ *
+ * *The "mov t0, C_lo" is necessary to cover the cases that C is the same
+ * register as B.
+ *
+ * **ARC performs a shift in this manner: B <<= (C & 31)
+ * For 32<=n<64, "n-32" and "n&31" are the same. Therefore, "B << n" and
+ * "B << (n-32)" yield the same results. e.g. the results of "B << 35" and
+ * "B << 3" are the same.
+ *
+ * The behaviour is undefined for n >= 64.
+ */
+u8 lsh_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_not_r(buf, t0, C_lo);
+	len += arc_lsri_r(BUF(buf, len), t1, B_lo, 1);
+	len += arc_lsr_r(BUF(buf, len), t1, t1, t0);
+	len += arc_mov_r(BUF(buf, len), t0, C_lo);
+	len += arc_asl_r(BUF(buf, len), B_lo, B_lo, t0);
+	len += arc_asl_r(BUF(buf, len), B_hi, B_hi, t0);
+	len += arc_or_r(BUF(buf, len), B_hi, B_hi, t1);
+	len += arc_btst_i(BUF(buf, len), t0, 5);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_hi, B_lo);
+	len += arc_movu_cc_r(BUF(buf, len), CC_unequal, B_lo, 0);
+
+	return len;
+}
+
+/*
+ * if (n < 32)
+ *   to_hi = B_lo >> 32-n          # extract upper n bits
+ *   lo <<= n
+ *   hi <<=n
+ *   hi |= to_hi
+ * else if (n < 64)
+ *   hi = lo << n-32
+ *   lo = 0
+ */
+u8 lsh_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	const u8 n    = (u8)imm;
+	u8 len = 0;
+
+	if (n == 0) {
+		return 0;
+	} else if (n <= 31) {
+		len  = arc_lsri_r(buf, t0, B_lo, 32 - n);
+		len += arc_asli_r(BUF(buf, len), B_lo, B_lo, n);
+		len += arc_asli_r(BUF(buf, len), B_hi, B_hi, n);
+		len += arc_or_r(BUF(buf, len), B_hi, B_hi, t0);
+	} else if (n <= 63) {
+		len  = arc_asli_r(buf, B_hi, B_lo, n - 32);
+		len += arc_movi_r(BUF(buf, len), B_lo, 0);
+	}
+	/* n >= 64 is undefined behaviour. */
+
+	return len;
+}
+
+/* "lsr a,b,c" --> "a = (b >> (c & 31))". */
+u8 rsh_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_lsr_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 rsh_r32_i32(u8 *buf, u8 rd, u8 imm)
+{
+	return arc_lsri_r(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * For better commentary, see lsh_r64().
+ *
+ * algorithm
+ * ---------
+ * if (n <= 32)
+ *   to_lo = hi << (32-n)
+ *   hi >>= n
+ *   lo >>= n
+ *   lo |= to_lo
+ * else
+ *   lo = hi >> (n-32)
+ *   hi = 0
+ *
+ * RSH    B,C
+ * ----------
+ * not    t0, C_lo
+ * asl    t1, B_hi, 1
+ * asl    t1, t1, t0
+ * mov    t0, C_lo
+ * lsr    B_hi, B_hi, t0
+ * lsr    B_lo, B_lo, t0
+ * or     B_lo, B_lo, t1
+ * btst   t0, 5
+ * mov.ne B_lo, B_hi
+ * mov.ne B_hi, 0
+ */
+u8 rsh_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_not_r(buf, t0, C_lo);
+	len += arc_asli_r(BUF(buf, len), t1, B_hi, 1);
+	len += arc_asl_r(BUF(buf, len), t1, t1, t0);
+	len += arc_mov_r(BUF(buf, len), t0, C_lo);
+	len += arc_lsr_r(BUF(buf, len), B_hi, B_hi, t0);
+	len += arc_lsr_r(BUF(buf, len), B_lo, B_lo, t0);
+	len += arc_or_r(BUF(buf, len), B_lo, B_lo, t1);
+	len += arc_btst_i(BUF(buf, len), t0, 5);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_lo, B_hi);
+	len += arc_movu_cc_r(BUF(buf, len), CC_unequal, B_hi, 0);
+
+	return len;
+}
+
+/*
+ * if (n < 32)
+ *   to_lo = B_lo << 32-n     # extract lower n bits, right-padded with 32-n 0s
+ *   lo >>=n
+ *   hi >>=n
+ *   hi |= to_lo
+ * else if (n < 64)
+ *   lo = hi >> n-32
+ *   hi = 0
+ */
+u8 rsh_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	const u8 n    = (u8)imm;
+	u8 len = 0;
+
+	if (n == 0) {
+		return 0;
+	} else if (n <= 31) {
+		len  = arc_asli_r(buf, t0, B_hi, 32 - n);
+		len += arc_lsri_r(BUF(buf, len), B_lo, B_lo, n);
+		len += arc_lsri_r(BUF(buf, len), B_hi, B_hi, n);
+		len += arc_or_r(BUF(buf, len), B_lo, B_lo, t0);
+	} else if (n <= 63) {
+		len  = arc_lsri_r(buf, B_lo, B_hi, n - 32);
+		len += arc_movi_r(BUF(buf, len), B_hi, 0);
+	}
+	/* n >= 64 is undefined behaviour. */
+
+	return len;
+}
+
+/* "asr a,b,c" --> "a = (b s>> (c & 31))". */
+u8 arsh_r32(u8 *buf, u8 rd, u8 rs)
+{
+	return arc_asr_r(buf, REG_LO(rd), REG_LO(rd), REG_LO(rs));
+}
+
+u8 arsh_r32_i32(u8 *buf, u8 rd, u8 imm)
+{
+	return arc_asri_r(buf, REG_LO(rd), REG_LO(rd), imm);
+}
+
+/*
+ * For comparison, see rsh_r64().
+ *
+ * algorithm
+ * ---------
+ * if (n <= 32)
+ *   to_lo = hi << (32-n)
+ *   hi s>>= n
+ *   lo  >>= n
+ *   lo |= to_lo
+ * else
+ *   hi_sign = hi s>>31
+ *   lo = hi s>> (n-32)
+ *   hi = hi_sign
+ *
+ * ARSH   B,C
+ * ----------
+ * not    t0, C_lo
+ * asl    t1, B_hi, 1
+ * asl    t1, t1, t0
+ * mov    t0, C_lo
+ * asr    B_hi, B_hi, t0
+ * lsr    B_lo, B_lo, t0
+ * or     B_lo, B_lo, t1
+ * btst   t0, 5
+ * asr    t0, B_hi, 31        # now, t0 = 0 or -1 based on B_hi's sign
+ * mov.ne B_lo, B_hi
+ * mov.ne B_hi, t0
+ */
+u8 arsh_r64(u8 *buf, u8 rd, u8 rs)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 t1   = REG_HI(JIT_REG_TMP);
+	const u8 C_lo = REG_LO(rs);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	u8 len;
+
+	len  = arc_not_r(buf, t0, C_lo);
+	len += arc_asli_r(BUF(buf, len), t1, B_hi, 1);
+	len += arc_asl_r(BUF(buf, len), t1, t1, t0);
+	len += arc_mov_r(BUF(buf, len), t0, C_lo);
+	len += arc_asr_r(BUF(buf, len), B_hi, B_hi, t0);
+	len += arc_lsr_r(BUF(buf, len), B_lo, B_lo, t0);
+	len += arc_or_r(BUF(buf, len), B_lo, B_lo, t1);
+	len += arc_btst_i(BUF(buf, len), t0, 5);
+	len += arc_asri_r(BUF(buf, len), t0, B_hi, 31);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_lo, B_hi);
+	len += arc_mov_cc_r(BUF(buf, len), CC_unequal, B_hi, t0);
+
+	return len;
+}
+
+/*
+ * if (n < 32)
+ *   to_lo = lo << 32-n     # extract lower n bits, right-padded with 32-n 0s
+ *   lo >>=n
+ *   hi s>>=n
+ *   hi |= to_lo
+ * else if (n < 64)
+ *   lo = hi s>> n-32
+ *   hi = (lo[msb] ? -1 : 0)
+ */
+u8 arsh_r64_i32(u8 *buf, u8 rd, s32 imm)
+{
+	const u8 t0   = REG_LO(JIT_REG_TMP);
+	const u8 B_lo = REG_LO(rd);
+	const u8 B_hi = REG_HI(rd);
+	const u8 n    = (u8)imm;
+	u8 len = 0;
+
+	if (n == 0) {
+		return 0;
+	} else if (n <= 31) {
+		len  = arc_asli_r(buf, t0, B_hi, 32 - n);
+		len += arc_lsri_r(BUF(buf, len), B_lo, B_lo, n);
+		len += arc_asri_r(BUF(buf, len), B_hi, B_hi, n);
+		len += arc_or_r(BUF(buf, len), B_lo, B_lo, t0);
+	} else if (n <= 63) {
+		len  = arc_asri_r(buf, B_lo, B_hi, n - 32);
+		len += arc_movi_r(BUF(buf, len), B_hi, -1);
+		len += arc_btst_i(BUF(buf, len), B_lo, 31);
+		len += arc_movu_cc_r(BUF(buf, len), CC_equal, B_hi, 0);
+	}
+	/* n >= 64 is undefined behaviour. */
+
+	return len;
+}
+
+u8 gen_swap(u8 *buf, u8 rd, u8 size, u8 endian, bool force, bool do_zext)
+{
+	u8 len = 0;
+#ifdef __BIG_ENDIAN
+	const u8 host_endian = BPF_FROM_BE;
+#else
+	const u8 host_endian = BPF_FROM_LE;
+#endif
+	if (host_endian != endian || force) {
+		switch (size) {
+		case 16:
+			/*
+			 * r = B4B3_B2B1 << 16 --> r = B2B1_0000
+			 * then, swape(r) would become the desired 0000_B1B2
+			 */
+			len = arc_asli_r(buf, REG_LO(rd), REG_LO(rd), 16);
+			fallthrough;
+		case 32:
+			len += arc_swape_r(BUF(buf, len), REG_LO(rd));
+			if (do_zext)
+				len += zext(BUF(buf, len), rd);
+			break;
+		case 64:
+			/*
+			 * swap "hi" and "lo":
+			 *   hi ^= lo;
+			 *   lo ^= hi;
+			 *   hi ^= lo;
+			 * and then swap the bytes in "hi" and "lo".
+			 */
+			len  = arc_xor_r(buf, REG_HI(rd), REG_LO(rd));
+			len += arc_xor_r(BUF(buf, len), REG_LO(rd), REG_HI(rd));
+			len += arc_xor_r(BUF(buf, len), REG_HI(rd), REG_LO(rd));
+			len += arc_swape_r(BUF(buf, len), REG_LO(rd));
+			len += arc_swape_r(BUF(buf, len), REG_HI(rd));
+			break;
+		default:
+			/* The caller must have handled this. */
+			break;
+		}
+	} else {
+		/*
+		 * If the same endianness, there's not much to do other
+		 * than zeroing out the upper bytes based on the "size".
+		 */
+		switch (size) {
+		case 16:
+			len = arc_and_i(buf, REG_LO(rd), 0xffff);
+			fallthrough;
+		case 32:
+			if (do_zext)
+				len += zext(BUF(buf, len), rd);
+			break;
+		case 64:
+			break;
+		default:
+			/* The caller must have handled this. */
+			break;
+		}
+	}
+
+	return len;
+}
+
+/*
+ * To create a frame, all that is needed is:
+ *
+ *  push fp
+ *  mov  fp, sp
+ *  sub  sp, <frame_size>
+ *
+ * "push fp" is taken care of separately while saving the clobbered registers.
+ * All that remains is copying SP value to FP and shrinking SP's address space
+ * for any possible function call to come.
+ */
+static inline u8 frame_create(u8 *buf, u16 size)
+{
+	u8 len;
+
+	len = arc_mov_r(buf, ARC_R_FP, ARC_R_SP);
+	if (IN_U6_RANGE(size))
+		len += arc_subi_r(BUF(buf, len), ARC_R_SP, size);
+	else
+		len += arc_sub_i(BUF(buf, len), ARC_R_SP, size);
+	return len;
+}
+
+/*
+ * mov sp, fp
+ *
+ * The value of SP upon entering was copied to FP.
+ */
+static inline u8 frame_restore(u8 *buf)
+{
+	return arc_mov_r(buf, ARC_R_SP, ARC_R_FP);
+}
+
+/*
+ * Going from a JITed code to the native caller:
+ *
+ * mov ARC_ABI_RET_lo, BPF_REG_0_lo     # r0 <- r8
+ * mov ARC_ABI_RET_hi, BPF_REG_0_hi     # r1 <- r9
+ */
+static u8 bpf_to_arc_return(u8 *buf)
+{
+	u8 len;
+
+	len  = arc_mov_r(buf, ARC_R_0, REG_LO(BPF_REG_0));
+	len += arc_mov_r(BUF(buf, len), ARC_R_1, REG_HI(BPF_REG_0));
+	return len;
+}
+
+/*
+ * Coming back from an external (in-kernel) function to the JITed code:
+ *
+ * mov ARC_ABI_RET_lo, BPF_REG_0_lo     # r8 <- r0
+ * mov ARC_ABI_RET_hi, BPF_REG_0_hi     # r9 <- r1
+ */
+u8 arc_to_bpf_return(u8 *buf)
+{
+	u8 len;
+
+	len  = arc_mov_r(buf, REG_LO(BPF_REG_0), ARC_R_0);
+	len += arc_mov_r(BUF(buf, len), REG_HI(BPF_REG_0), ARC_R_1);
+	return len;
+}
+
+/*
+ * This translation leads to:
+ *
+ *   mov r10, addr                # always an 8-byte instruction
+ *   jl  [r10]
+ *
+ * The length of the "mov" must be fixed (8), otherwise it may diverge
+ * during the normal and extra passes:
+ *
+ *          normal pass                  extra pass
+ *
+ *   180:  mov     r10,0        |   180:  mov     r10,0x700578d8
+ *   184:  jl      [r10]        |   188:  jl      [r10]
+ *   188:  add.f   r16,r16,0x1  |   18c:  adc     r17,r17,0
+ *   18c:  adc     r17,r17,0    |
+ *
+ * In the above example, the change from "r10 <- 0" to "r10 <- 0x700578d8"
+ * has led to an increase in the length of the "mov" instruction.
+ * Inadvertently, that caused the loss of the "add.f" instruction.
+ */
+static u8 jump_and_link(u8 *buf, u32 addr)
+{
+	u8 len;
+
+	len  = arc_mov_i_fixed(buf, REG_LO(JIT_REG_TMP), addr);
+	len += arc_jl(BUF(buf, len), REG_LO(JIT_REG_TMP));
+	return len;
+}
+
+/*
+ * This function determines which ARC registers must be saved and restored.
+ * It does so by looking into:
+ *
+ * "bpf_reg": The clobbered (destination) BPF register
+ * "is_call": Indicator if the current instruction is a call
+ *
+ * When a register of interest is clobbered, its corresponding bit position
+ * in return value, "usage", is set to true.
+ */
+u32 mask_for_used_regs(u8 bpf_reg, bool is_call)
+{
+	u32 usage = 0;
+
+	/* BPF registers that must be saved. */
+	if (bpf_reg >= BPF_REG_6 && bpf_reg <= BPF_REG_9) {
+		usage |= BIT(REG_LO(bpf_reg));
+		usage |= BIT(REG_HI(bpf_reg));
+	/*
+	 * Using the frame pointer register implies that it should
+	 * be saved and reinitialised with the current frame data.
+	 */
+	} else if (bpf_reg == BPF_REG_FP) {
+		usage |= BIT(REG_LO(BPF_REG_FP));
+	/* Could there be some ARC registers that must to be saved? */
+	} else {
+		if (REG_LO(bpf_reg) >= ARC_CALLEE_SAVED_REG_FIRST &&
+		    REG_LO(bpf_reg) <= ARC_CALLEE_SAVED_REG_LAST)
+			usage |= BIT(REG_LO(bpf_reg));
+
+		if (REG_HI(bpf_reg) >= ARC_CALLEE_SAVED_REG_FIRST &&
+		    REG_HI(bpf_reg) <= ARC_CALLEE_SAVED_REG_LAST)
+			usage |= BIT(REG_HI(bpf_reg));
+	}
+
+	/* A "call" indicates that ARC's "blink" reg must be saved. */
+	usage |= is_call ? BIT(ARC_R_BLINK) : 0;
+
+	return usage;
+}
+
+/*
+ * push blink             # if blink is marked as clobbered
+ * push r[0-n]            # if r[i] is marked as clobbered
+ * push fp                # if fp is marked as clobbered
+ * mov  fp, sp            # if frame_size > 0 (clobbers fp)
+ * sub  sp, <frame_size>  # same as above
+ */
+u8 arc_prologue(u8 *buf, u32 usage, u16 frame_size)
+{
+	u8 len = 0;
+	u32 gp_regs = 0;
+
+	/* Deal with blink first. */
+	if (usage & BIT(ARC_R_BLINK))
+		len += arc_push_r(BUF(buf, len), ARC_R_BLINK);
+
+	gp_regs = usage & ~(BIT(ARC_R_BLINK) | BIT(ARC_R_FP));
+	while (gp_regs) {
+		u8 reg = __builtin_ffs(gp_regs) - 1;
+
+		len += arc_push_r(BUF(buf, len), reg);
+		gp_regs &= ~BIT(reg);
+	}
+
+	/* Deal with fp last. */
+	if ((usage & BIT(ARC_R_FP)) || frame_size > 0)
+		len += arc_push_r(BUF(buf, len), ARC_R_FP);
+
+	if (frame_size > 0)
+		len += frame_create(BUF(buf, len), frame_size);
+
+#ifdef ARC_BPF_JIT_DEBUG
+	if ((usage & BIT(ARC_R_FP)) && frame_size == 0) {
+		pr_err("FP is being saved while there is no frame.");
+		BUG();
+	}
+#endif
+
+	return len;
+}
+
+/*
+ * mov  sp, fp            # if frame_size > 0
+ * pop  fp                # if fp is marked as clobbered
+ * pop  r[n-0]            # if r[i] is marked as clobbered
+ * pop  blink             # if blink is marked as clobbered
+ * mov  r0, r8            # always: ABI_return <- BPF_return
+ * mov  r1, r9            # continuation of above
+ * j    [blink]           # always
+ *
+ * "fp being marked as clobbered" and "frame_size > 0" are the two sides of
+ * the same coin.
+ */
+u8 arc_epilogue(u8 *buf, u32 usage, u16 frame_size)
+{
+	u32 len = 0;
+	u32 gp_regs = 0;
+
+#ifdef ARC_BPF_JIT_DEBUG
+	if ((usage & BIT(ARC_R_FP)) && frame_size == 0) {
+		pr_err("FP is being saved while there is no frame.");
+		BUG();
+	}
+#endif
+
+	if (frame_size > 0)
+		len += frame_restore(BUF(buf, len));
+
+	/* Deal with fp first. */
+	if ((usage & BIT(ARC_R_FP)) || frame_size > 0)
+		len += arc_pop_r(BUF(buf, len), ARC_R_FP);
+
+	gp_regs = usage & ~(BIT(ARC_R_BLINK) | BIT(ARC_R_FP));
+	while (gp_regs) {
+		/* "usage" is 32-bit, each bit indicating an ARC register. */
+		u8 reg = 31 - __builtin_clz(gp_regs);
+
+		len += arc_pop_r(BUF(buf, len), reg);
+		gp_regs &= ~BIT(reg);
+	}
+
+	/* Deal with blink last. */
+	if (usage & BIT(ARC_R_BLINK))
+		len += arc_pop_r(BUF(buf, len), ARC_R_BLINK);
+
+	/* Wrap up the return value and jump back to the caller. */
+	len += bpf_to_arc_return(BUF(buf, len));
+	len += arc_jmp_return(BUF(buf, len));
+
+	return len;
+}
+
+/*
+ * For details on the algorithm, see the comments of "gen_jcc_64()".
+ *
+ * This data structure is holding information for jump translations.
+ *
+ * jit_off: How many bytes into the current JIT address, "b"ranch insn. occurs
+ * cond: The condition that the ARC branch instruction must use
+ *
+ * e.g.:
+ *
+ * BPF_JGE  R1, R0, @target
+ * ------------------------
+ *            |
+ *            v
+ * 0x1000: cmp  r3, r1     # 0x1000 is the JIT address for "BPF_JGE ..." insn
+ * 0x1004: bhi  @target    # first jump (branch higher)
+ * 0x1008: blo  @end       # second jump acting as a skip (end is 0x1014)
+ * 0x100C: cmp  r2, r0     # the lower 32 bits are evaluated
+ * 0x1010: bhs  @target    # third jump (branch higher or same)
+ * 0x1014: ...
+ *
+ * The jit_off(set) of the "bhi" is 4 bytes.
+ * The cond(ition) for the "bhi" is "CC_great_u".
+ *
+ * The jit_off(set) is necessary for calculating the exact displacement
+ * to the "target" address:
+ *
+ * jit_address + jit_off(set) - @target
+ * 0x1000      + 4            - @target
+ */
+#define JCC64_NR_OF_JMPS 3	/* Number of jumps in jcc64 template. */
+#define JCC64_INSNS_TO_END 3	/* Number of insn. inclusive the 2nd jmp to end. */
+#define JCC64_SKIP_JMP 1	/* Index of the "skip" jump to "end". */
+static const struct {
+	/*
+	 * "jit_off" is common between all "jmp[]" and is coupled with
+	 * "cond" of each "jmp[]" instance. e.g.:
+	 *
+	 * arcv2_64_jccs.jit_off[1]
+	 * arcv2_64_jccs.jmp[ARC_CC_UGT].cond[1]
+	 *
+	 * Are indicating that the second jump in JITed code of "UGT"
+	 * is at offset "jit_off[1]" while its condition is "cond[1]".
+	 */
+	u8 jit_off[JCC64_NR_OF_JMPS];
+
+	struct {
+		u8 cond[JCC64_NR_OF_JMPS];
+	} jmp[ARC_CC_SLE + 1];
+} arcv2_64_jccs = {
+	.jit_off = {
+		INSN_len_normal * 1,
+		INSN_len_normal * 2,
+		INSN_len_normal * 4
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bhi  @target         # 1: u>
+	 *   blo  @end            # 2: u<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhi  @target         # 3: u>
+	 * end:
+	 */
+	.jmp[ARC_CC_UGT] = {
+		.cond = {CC_great_u, CC_less_u, CC_great_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bhi  @target         # 1: u>
+	 *   blo  @end            # 2: u<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhs  @target         # 3: u>=
+	 * end:
+	 */
+	.jmp[ARC_CC_UGE] = {
+		.cond = {CC_great_u, CC_less_u, CC_great_eq_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blo  @target         # 1: u<
+	 *   bhi  @end            # 2: u>
+	 *   cmp  rd_lo, rs_lo
+	 *   blo  @target         # 3: u<
+	 * end:
+	 */
+	.jmp[ARC_CC_ULT] = {
+		.cond = {CC_less_u, CC_great_u, CC_less_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blo  @target         # 1: u<
+	 *   bhi  @end            # 2: u>
+	 *   cmp  rd_lo, rs_lo
+	 *   bls  @target         # 3: u<=
+	 * end:
+	 */
+	.jmp[ARC_CC_ULE] = {
+		.cond = {CC_less_u, CC_great_u, CC_less_eq_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bgt  @target         # 1: s>
+	 *   blt  @end            # 2: s<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhi  @target         # 3: u>
+	 * end:
+	 */
+	.jmp[ARC_CC_SGT] = {
+		.cond = {CC_great_s, CC_less_s, CC_great_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   bgt  @target         # 1: s>
+	 *   blt  @end            # 2: s<
+	 *   cmp  rd_lo, rs_lo
+	 *   bhs  @target         # 3: u>=
+	 * end:
+	 */
+	.jmp[ARC_CC_SGE] = {
+		.cond = {CC_great_s, CC_less_s, CC_great_eq_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blt  @target         # 1: s<
+	 *   bgt  @end            # 2: s>
+	 *   cmp  rd_lo, rs_lo
+	 *   blo  @target         # 3: u<
+	 * end:
+	 */
+	.jmp[ARC_CC_SLT] = {
+		.cond = {CC_less_s, CC_great_s, CC_less_u}
+	},
+	/*
+	 *   cmp  rd_hi, rs_hi
+	 *   blt  @target         # 1: s<
+	 *   bgt  @end            # 2: s>
+	 *   cmp  rd_lo, rs_lo
+	 *   bls  @target         # 3: u<=
+	 * end:
+	 */
+	.jmp[ARC_CC_SLE] = {
+		.cond = {CC_less_s, CC_great_s, CC_less_eq_u}
+	}
+};
+
+/*
+ * The displacement (offset) for ARC's "b"ranch instruction is the distance
+ * from the aligned version of _current_ instruction (PCL) to the target
+ * instruction:
+ *
+ * DISP = TARGET - PCL          # PCL is the word aligned PC
+ */
+static inline s32 get_displacement(u32 curr_off, u32 targ_off)
+{
+	return (s32)(targ_off - (curr_off & ~3L));
+}
+
+/*
+ * "disp"lacement should be:
+ *
+ * 1. 16-bit aligned.
+ * 2. fit in S25, because no "condition code" is supposed to be encoded.
+ */
+static inline bool is_valid_far_disp(s32 disp)
+{
+	return (!(disp & 1) && IN_S25_RANGE(disp));
+}
+
+/*
+ * "disp"lacement should be:
+ *
+ * 1. 16-bit aligned.
+ * 2. fit in S21, because "condition code" is supposed to be encoded too.
+ */
+static inline bool is_valid_near_disp(s32 disp)
+{
+	return (!(disp & 1) && IN_S21_RANGE(disp));
+}
+
+/*
+ * cmp        rd_hi, rs_hi
+ * cmp.z      rd_lo, rs_lo
+ * b{eq,ne}   @target
+ *   |  |
+ *   |  `-->  "eq" param is false (JNE)
+ *   `----->  "eq" param is true  (JEQ)
+ */
+static int gen_j_eq_64(u8 *buf, u8 rd, u8 rs, bool eq,
+		       u32 curr_off, u32 targ_off)
+{
+	s32 disp;
+	u8 len = 0;
+
+	len += arc_cmp_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	len += arc_cmpz_r(BUF(buf, len), REG_LO(rd), REG_LO(rs));
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), eq ? CC_equal : CC_unequal, disp);
+
+	return len;
+}
+
+/*
+ * tst   rd_hi, rs_hi
+ * tst.z rd_lo, rs_lo
+ * bne   @target
+ */
+static u8 gen_jset_64(u8 *buf, u8 rd, u8 rs, u32 curr_off, u32 targ_off)
+{
+	u8 len = 0;
+	s32 disp;
+
+	len += arc_tst_r(BUF(buf, len), REG_HI(rd), REG_HI(rs));
+	len += arc_tstz_r(BUF(buf, len), REG_LO(rd), REG_LO(rs));
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), CC_unequal, disp);
+
+	return len;
+}
+
+/*
+ * Verify if all the jumps for a JITed jcc64 operation are valid,
+ * by consulting the data stored at "arcv2_64_jccs".
+ */
+static bool check_jcc_64(u32 curr_off, u32 targ_off, u8 cond)
+{
+	size_t i;
+
+	if (cond >= ARC_CC_LAST)
+		return false;
+
+	for (i = 0; i < JCC64_NR_OF_JMPS; i++) {
+		u32 from, to;
+
+		from = curr_off + arcv2_64_jccs.jit_off[i];
+		/* for the 2nd jump, we jump to the end of block. */
+		if (i != JCC64_SKIP_JMP)
+			to = targ_off;
+		else
+			to = from + (JCC64_INSNS_TO_END * INSN_len_normal);
+		/* There is a "cc" in the instruction, so a "near" jump. */
+		if (!is_valid_near_disp(get_displacement(from, to)))
+			return false;
+	}
+
+	return true;
+}
+
+/* Can the jump from "curr_off" to "targ_off" actually happen? */
+bool check_jmp_64(u32 curr_off, u32 targ_off, u8 cond)
+{
+	s32 disp;
+
+	switch (cond) {
+	case ARC_CC_UGT:
+	case ARC_CC_UGE:
+	case ARC_CC_ULT:
+	case ARC_CC_ULE:
+	case ARC_CC_SGT:
+	case ARC_CC_SGE:
+	case ARC_CC_SLT:
+	case ARC_CC_SLE:
+		return check_jcc_64(curr_off, targ_off, cond);
+	case ARC_CC_EQ:
+	case ARC_CC_NE:
+	case ARC_CC_SET:
+		/*
+		 * The "jump" for the JITed BPF_J{SET,EQ,NE} is actually the
+		 * 3rd instruction. See comments of "gen_j{set,_eq}_64()".
+		 */
+		curr_off += 2 * INSN_len_normal;
+		disp = get_displacement(curr_off, targ_off);
+		/* There is a "cc" field in the issued instruction. */
+		return is_valid_near_disp(disp);
+	case ARC_CC_AL:
+		disp = get_displacement(curr_off, targ_off);
+		return is_valid_far_disp(disp);
+	default:
+		return false;
+	}
+}
+
+/*
+ * The template for the 64-bit jumps with the following BPF conditions
+ *
+ * u< u<= u> u>= s< s<= s> s>=
+ *
+ * Looks like below:
+ *
+ *   cmp   rd_hi, rs_hi
+ *   b<c1> @target
+ *   b<c2> @end
+ *   cmp   rd_lo, rs_lo   # if execution reaches here, r{d,s}_hi are equal
+ *   b<c3> @target
+ * end:
+ *
+ * "c1" is the condition that JIT is handling minus the equality part.
+ * For instance if we have to translate an "unsigned greater or equal",
+ * then "c1" will be "unsigned greater". We won't know about equality
+ * until all 64-bits of data (higeher and lower registers) are processed.
+ *
+ * "c2" is the counter logic of "c1". For instance, if "c1" is originated
+ * from "s>", then "c2" would be "s<". Notice that equality doesn't play
+ * a role here either, because the lower 32 bits are not processed yet.
+ *
+ * "c3" is the unsigned version of "c1", no matter if the BPF condition
+ * was signed or unsigned. An unsigned version is necessary, because the
+ * MSB of the lower 32 bits does not reflect a sign in the whole 64-bit
+ * scheme. Otherwise, 64-bit comparisons like
+ * (0x0000_0000,0x8000_0000) s>= (0x0000_0000,0x0000_0000)
+ * would yield an incorrect result. Finally, if there is an equality
+ * check in the BPF condition, it will be reflected in "c3".
+ *
+ * You can find all the instances of this template where the
+ * "arcv2_64_jccs" is getting initialised.
+ */
+static u8 gen_jcc_64(u8 *buf, u8 rd, u8 rs, u8 cond,
+		     u32 curr_off, u32 targ_off)
+{
+	s32 disp;
+	u32 end_off;
+	const u8 *cc = arcv2_64_jccs.jmp[cond].cond;
+	u8 len = 0;
+
+	/* cmp rd_hi, rs_hi */
+	len += arc_cmp_r(buf, REG_HI(rd), REG_HI(rs));
+
+	/* b<c1> @target */
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), cc[0], disp);
+
+	/* b<c2> @end */
+	end_off = curr_off + len + (JCC64_INSNS_TO_END * INSN_len_normal);
+	disp = get_displacement(curr_off + len, end_off);
+	len += arc_bcc(BUF(buf, len), cc[1], disp);
+
+	/* cmp rd_lo, rs_lo */
+	len += arc_cmp_r(BUF(buf, len), REG_LO(rd), REG_LO(rs));
+
+	/* b<c3> @target */
+	disp = get_displacement(curr_off + len, targ_off);
+	len += arc_bcc(BUF(buf, len), cc[2], disp);
+
+	return len;
+}
+
+/*
+ * This function only applies the necessary logic to make the proper
+ * translations. All the sanity checks must have already been done
+ * by calling the check_jmp_64().
+ */
+u8 gen_jmp_64(u8 *buf, u8 rd, u8 rs, u8 cond, u32 curr_off, u32 targ_off)
+{
+	u8 len = 0;
+	bool eq = false;
+	s32 disp;
+
+	switch (cond) {
+	case ARC_CC_AL:
+		disp = get_displacement(curr_off, targ_off);
+		len = arc_b(buf, disp);
+		break;
+	case ARC_CC_UGT:
+	case ARC_CC_UGE:
+	case ARC_CC_ULT:
+	case ARC_CC_ULE:
+	case ARC_CC_SGT:
+	case ARC_CC_SGE:
+	case ARC_CC_SLT:
+	case ARC_CC_SLE:
+		len = gen_jcc_64(buf, rd, rs, cond, curr_off, targ_off);
+		break;
+	case ARC_CC_EQ:
+		eq = true;
+		fallthrough;
+	case ARC_CC_NE:
+		len = gen_j_eq_64(buf, rd, rs, eq, curr_off, targ_off);
+		break;
+	case ARC_CC_SET:
+		len = gen_jset_64(buf, rd, rs, curr_off, targ_off);
+		break;
+	default:
+#ifdef ARC_BPF_JIT_DEBUG
+		pr_err("64-bit jump condition is not known.");
+		BUG();
+#endif
+	}
+	return len;
+}
+
+/*
+ * The condition codes to use when generating JIT instructions
+ * for 32-bit jumps.
+ *
+ * The "ARC_CC_AL" index is not really used by the code, but it
+ * is here for the sake of completeness.
+ *
+ * The "ARC_CC_SET" becomes "CC_unequal" because of the "tst"
+ * instruction that precedes the conditional branch.
+ */
+static const u8 arcv2_32_jmps[ARC_CC_LAST] = {
+	[ARC_CC_UGT] = CC_great_u,
+	[ARC_CC_UGE] = CC_great_eq_u,
+	[ARC_CC_ULT] = CC_less_u,
+	[ARC_CC_ULE] = CC_less_eq_u,
+	[ARC_CC_SGT] = CC_great_s,
+	[ARC_CC_SGE] = CC_great_eq_s,
+	[ARC_CC_SLT] = CC_less_s,
+	[ARC_CC_SLE] = CC_less_eq_s,
+	[ARC_CC_AL]  = CC_always,
+	[ARC_CC_EQ]  = CC_equal,
+	[ARC_CC_NE]  = CC_unequal,
+	[ARC_CC_SET] = CC_unequal
+};
+
+/* Can the jump from "curr_off" to "targ_off" actually happen? */
+bool check_jmp_32(u32 curr_off, u32 targ_off, u8 cond)
+{
+	u8 addendum;
+	s32 disp;
+
+	if (cond >= ARC_CC_LAST)
+		return false;
+
+	/*
+	 * The unconditional jump happens immediately, while the rest
+	 * are either preceded by a "cmp" or "tst" instruction.
+	 */
+	addendum = (cond == ARC_CC_AL) ? 0 : INSN_len_normal;
+	disp = get_displacement(curr_off + addendum, targ_off);
+
+	if (cond == ARC_CC_AL)
+		return is_valid_far_disp(disp);
+	else
+		return is_valid_near_disp(disp);
+}
+
+/*
+ * The JITed code for 32-bit (conditional) branches:
+ *
+ * ARC_CC_AL  @target
+ *   b @jit_targ_addr
+ *
+ * ARC_CC_SET rd, rs, @target
+ *   tst rd, rs
+ *   bnz @jit_targ_addr
+ *
+ * ARC_CC_xx  rd, rs, @target
+ *   cmp rd, rs
+ *   b<cc> @jit_targ_addr            # cc = arcv2_32_jmps[xx]
+ */
+u8 gen_jmp_32(u8 *buf, u8 rd, u8 rs, u8 cond, u32 curr_off, u32 targ_off)
+{
+	s32 disp;
+	u8 len = 0;
+
+	/*
+	 * Although this must have already been checked by "check_jmp_32()",
+	 * we're not going to risk accessing "arcv2_32_jmps" array without
+	 * the boundary check.
+	 */
+	if (cond >= ARC_CC_LAST) {
+#ifdef ARC_BPF_JIT_DEBUG
+		pr_err("32-bit jump condition is not known.");
+		BUG();
+#endif
+		return 0;
+	}
+
+	/* If there is a "condition", issue the "cmp" or "tst" first. */
+	if (cond != ARC_CC_AL) {
+		if (cond == ARC_CC_SET)
+			len = tst_r32(buf, rd, rs);
+		else
+			len = cmp_r32(buf, rd, rs);
+		/*
+		 * The issued instruction affects the "disp"lacement as
+		 * it alters the "curr_off" by its "len"gth. The "curr_off"
+		 * should always point to the jump instruction.
+		 */
+		disp = get_displacement(curr_off + len, targ_off);
+		len += arc_bcc(BUF(buf, len), arcv2_32_jmps[cond], disp);
+	} else {
+		/* The straight forward unconditional jump. */
+		disp = get_displacement(curr_off, targ_off);
+		len = arc_b(buf, disp);
+	}
+
+	return len;
+}
+
+/*
+ * Generate code for functions calls. There can be two types of calls:
+ *
+ * - Calling another BPF function
+ * - Calling an in-kernel function which is compiled by ARC gcc
+ *
+ * In the later case, we must comply to ARCv2 ABI and handle arguments
+ * and return values accordingly.
+ */
+u8 gen_func_call(u8 *buf, ARC_ADDR func_addr, bool external_func)
+{
+	u8 len = 0;
+
+	/*
+	 * In case of an in-kernel function call, always push the 5th
+	 * argument onto the stack, because that's where the ABI dictates
+	 * it should be found. If the callee doesn't really use it, no harm
+	 * is done. The stack is readjusted either way after the call.
+	 */
+	if (external_func)
+		len += push_r64(BUF(buf, len), BPF_REG_5);
+
+	len += jump_and_link(BUF(buf, len), func_addr);
+
+	if (external_func)
+		len += arc_add_i(BUF(buf, len), ARC_R_SP, ARC_R_SP, ARG5_SIZE);
+
+	return len;
+}
diff --git a/arch/arc/net/bpf_jit_core.c b/arch/arc/net/bpf_jit_core.c
new file mode 100644
index 000000000000..e3628922c24a
--- /dev/null
+++ b/arch/arc/net/bpf_jit_core.c
@@ -0,0 +1,1425 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The back-end-agnostic part of Just-In-Time compiler for eBPF bytecode.
+ *
+ * Copyright (c) 2024 Synopsys Inc.
+ * Author: Shahab Vahedi <shahab@synopsys.com>
+ */
+#include <linux/bug.h>
+#include "bpf_jit.h"
+
+/*
+ * Check for the return value. A pattern used often in this file.
+ * There must be a "ret" variable of type "int" in the scope.
+ */
+#define CHECK_RET(cmd)			\
+	do {				\
+		ret = (cmd);		\
+		if (ret < 0)		\
+			return ret;	\
+	} while (0)
+
+#ifdef ARC_BPF_JIT_DEBUG
+/* Dumps bytes in /var/log/messages at KERN_INFO level (4). */
+static void dump_bytes(const u8 *buf, u32 len, const char *header)
+{
+	u8 line[64];
+	size_t i, j;
+
+	pr_info("-----------------[ %s ]-----------------\n", header);
+
+	for (i = 0, j = 0; i < len; i++) {
+		/* Last input byte? */
+		if (i == len - 1) {
+			j += scnprintf(line + j, 64 - j, "0x%02x", buf[i]);
+			pr_info("%s\n", line);
+			break;
+		}
+		/* End of line? */
+		else if (i % 8 == 7) {
+			j += scnprintf(line + j, 64 - j, "0x%02x", buf[i]);
+			pr_info("%s\n", line);
+			j = 0;
+		} else {
+			j += scnprintf(line + j, 64 - j, "0x%02x, ", buf[i]);
+		}
+	}
+}
+#endif /* ARC_BPF_JIT_DEBUG */
+
+/********************* JIT context ***********************/
+
+/*
+ * buf:		Translated instructions end up here.
+ * len:		The length of whole block in bytes.
+ * index:	The offset at which the _next_ instruction may be put.
+ */
+struct jit_buffer {
+	u8	*buf;
+	u32	len;
+	u32	index;
+};
+
+/*
+ * This is a subset of "struct jit_context" that its information is deemed
+ * necessary for the next extra pass to come.
+ *
+ * bpf_header:	Needed to finally lock the region.
+ * bpf2insn:	Used to find the translation for instructions of interest.
+ *
+ * Things like "jit.buf" and "jit.len" can be retrieved respectively from
+ * "prog->bpf_func" and "prog->jited_len".
+ */
+struct arc_jit_data {
+	struct bpf_binary_header *bpf_header;
+	u32                      *bpf2insn;
+};
+
+/*
+ * The JIT pertinent context that is used by different functions.
+ *
+ * prog:		The current eBPF program being handled.
+ * orig_prog:		The original eBPF program before any possible change.
+ * jit:			The JIT buffer and its length.
+ * bpf_header:		The JITed program header. "jit.buf" points inside it.
+ * emit:		If set, opcodes are written to memory; else, a dry-run.
+ * do_zext:		If true, 32-bit sub-regs must be zero extended.
+ * bpf2insn:		Maps BPF insn indices to their counterparts in jit.buf.
+ * bpf2insn_valid:	Indicates if "bpf2ins" is populated with the mappings.
+ * jit_data:		A piece of memory to transfer data to the next pass.
+ * arc_regs_clobbered:	Each bit status determines if that arc reg is clobbered.
+ * save_blink:		Whether ARC's "blink" register needs to be saved.
+ * frame_size:		Derived from "prog->aux->stack_depth".
+ * epilogue_offset:	Used by early "return"s in the code to jump here.
+ * need_extra_pass:	A forecast if an "extra_pass" will occur.
+ * is_extra_pass:	Indicates if the current pass is an extra pass.
+ * user_bpf_prog:	True, if VM opcodes come from a real program.
+ * blinded:		True if "constant blinding" step returned a new "prog".
+ * success:		Indicates if the whole JIT went OK.
+ */
+struct jit_context {
+	struct bpf_prog			*prog;
+	struct bpf_prog			*orig_prog;
+	struct jit_buffer		jit;
+	struct bpf_binary_header	*bpf_header;
+	bool				emit;
+	bool				do_zext;
+	u32				*bpf2insn;
+	bool				bpf2insn_valid;
+	struct arc_jit_data		*jit_data;
+	u32				arc_regs_clobbered;
+	bool				save_blink;
+	u16				frame_size;
+	u32				epilogue_offset;
+	bool				need_extra_pass;
+	bool				is_extra_pass;
+	bool				user_bpf_prog;
+	bool				blinded;
+	bool				success;
+};
+
+/*
+ * If we're in ARC_BPF_JIT_DEBUG mode and the debug level is right, dump the
+ * input BPF stream. "bpf_jit_dump()" is not fully suited for this purpose.
+ */
+static void vm_dump(const struct bpf_prog *prog)
+{
+#ifdef ARC_BPF_JIT_DEBUG
+	if (bpf_jit_enable > 1)
+		dump_bytes((u8 *)prog->insns, 8 * prog->len, " VM  ");
+#endif
+}
+
+/*
+ * If the right level of debug is set, dump the bytes. There are 2 variants
+ * of this function:
+ *
+ * 1. Use the standard bpf_jit_dump() which is meant only for JITed code.
+ * 2. Use the dump_bytes() to match its "vm_dump()" instance.
+ */
+static void jit_dump(const struct jit_context *ctx)
+{
+#ifdef ARC_BPF_JIT_DEBUG
+	u8 header[8];
+#endif
+	const int pass = ctx->is_extra_pass ? 2 : 1;
+
+	if (bpf_jit_enable <= 1 || !ctx->prog->jited)
+		return;
+
+#ifdef ARC_BPF_JIT_DEBUG
+	scnprintf(header, sizeof(header), "JIT:%d", pass);
+	dump_bytes(ctx->jit.buf, ctx->jit.len, header);
+	pr_info("\n");
+#else
+	bpf_jit_dump(ctx->prog->len, ctx->jit.len, pass, ctx->jit.buf);
+#endif
+}
+
+/* Initialise the context so there's no garbage. */
+static int jit_ctx_init(struct jit_context *ctx, struct bpf_prog *prog)
+{
+	memset(ctx, 0, sizeof(*ctx));
+
+	ctx->orig_prog = prog;
+
+	/* If constant blinding was requested but failed, scram. */
+	ctx->prog = bpf_jit_blind_constants(prog);
+	if (IS_ERR(ctx->prog))
+		return PTR_ERR(ctx->prog);
+	ctx->blinded = (ctx->prog != ctx->orig_prog);
+
+	/* If the verifier doesn't zero-extend, then we have to do it. */
+	ctx->do_zext = !ctx->prog->aux->verifier_zext;
+
+	ctx->is_extra_pass = ctx->prog->jited;
+	ctx->user_bpf_prog = ctx->prog->is_func;
+
+	return 0;
+}
+
+/*
+ * Only after the first iteration of normal pass (the dry-run),
+ * there are valid offsets in ctx->bpf2insn array.
+ */
+static inline bool offsets_available(const struct jit_context *ctx)
+{
+	return ctx->bpf2insn_valid;
+}
+
+/*
+ * "*mem" should be freed when there is no "extra pass" to come,
+ * or the compilation terminated abruptly. A few of such memory
+ * allocations are: ctx->jit_data and ctx->bpf2insn.
+ */
+static inline void maybe_free(struct jit_context *ctx, void **mem)
+{
+	if (*mem) {
+		if (!ctx->success || !ctx->need_extra_pass) {
+			kfree(*mem);
+			*mem = NULL;
+		}
+	}
+}
+
+/*
+ * Free memories based on the status of the context.
+ *
+ * A note about "bpf_header": On successful runs, "bpf_header" is
+ * not freed, because "jit.buf", a sub-array of it, is returned as
+ * the "bpf_func". However, "bpf_header" is lost and nothing points
+ * to it. This should not cause a leakage, because apparently
+ * "bpf_header" can be revived by "bpf_jit_binary_hdr()". This is
+ * how "bpf_jit_free()" in "kernel/bpf/core.c" releases the memory.
+ */
+static void jit_ctx_cleanup(struct jit_context *ctx)
+{
+	if (ctx->blinded) {
+		/* if all went well, release the orig_prog. */
+		if (ctx->success)
+			bpf_jit_prog_release_other(ctx->prog, ctx->orig_prog);
+		else
+			bpf_jit_prog_release_other(ctx->orig_prog, ctx->prog);
+	}
+
+	maybe_free(ctx, (void **)&ctx->bpf2insn);
+	maybe_free(ctx, (void **)&ctx->jit_data);
+
+	if (!ctx->bpf2insn)
+		ctx->bpf2insn_valid = false;
+
+	/* Freeing "bpf_header" is enough. "jit.buf" is a sub-array of it. */
+	if (!ctx->success && ctx->bpf_header) {
+		bpf_jit_binary_free(ctx->bpf_header);
+		ctx->bpf_header = NULL;
+		ctx->jit.buf    = NULL;
+		ctx->jit.index  = 0;
+		ctx->jit.len    = 0;
+	}
+
+	ctx->emit = false;
+	ctx->do_zext = false;
+}
+
+/*
+ * Analyse the register usage and record the frame size.
+ * The register usage is determined by consulting the back-end.
+ */
+static void analyze_reg_usage(struct jit_context *ctx)
+{
+	size_t i;
+	u32 usage = 0;
+	const struct bpf_insn *insn = ctx->prog->insnsi;
+
+	for (i = 0; i < ctx->prog->len; i++) {
+		u8 bpf_reg;
+		bool call;
+
+		bpf_reg = insn[i].dst_reg;
+		call = (insn[i].code == (BPF_JMP | BPF_CALL)) ? true : false;
+		usage |= mask_for_used_regs(bpf_reg, call);
+	}
+
+	ctx->arc_regs_clobbered = usage;
+	ctx->frame_size = ctx->prog->aux->stack_depth;
+}
+
+/* Verify that no instruction will be emitted when there is no buffer. */
+static inline int jit_buffer_check(const struct jit_context *ctx)
+{
+	if (ctx->emit) {
+		if (!ctx->jit.buf) {
+			pr_err("bpf-jit: inconsistence state; no "
+			       "buffer to emit instructions.\n");
+			return -EINVAL;
+		} else if (ctx->jit.index > ctx->jit.len) {
+			pr_err("bpf-jit: estimated JIT length is less "
+			       "than the emitted instructions.\n");
+			return -EFAULT;
+		}
+	}
+	return 0;
+}
+
+/* On a dry-run (emit=false), "jit.len" is growing gradually. */
+static inline void jit_buffer_update(struct jit_context *ctx, u32 n)
+{
+	if (!ctx->emit)
+		ctx->jit.len += n;
+	else
+		ctx->jit.index += n;
+}
+
+/* Based on "emit", determine the address where instructions are emitted. */
+static inline u8 *effective_jit_buf(const struct jit_context *ctx)
+{
+	return ctx->emit ? (ctx->jit.buf + ctx->jit.index) : NULL;
+}
+
+/* Prologue based on context variables set by "analyze_reg_usage()". */
+static int handle_prologue(struct jit_context *ctx)
+{
+	int ret;
+	u8 *buf = effective_jit_buf(ctx);
+	u32 len = 0;
+
+	CHECK_RET(jit_buffer_check(ctx));
+
+	len = arc_prologue(buf, ctx->arc_regs_clobbered, ctx->frame_size);
+	jit_buffer_update(ctx, len);
+
+	return 0;
+}
+
+/* The counter part for "handle_prologue()". */
+static int handle_epilogue(struct jit_context *ctx)
+{
+	int ret;
+	u8 *buf = effective_jit_buf(ctx);
+	u32 len = 0;
+
+	CHECK_RET(jit_buffer_check(ctx));
+
+	len = arc_epilogue(buf, ctx->arc_regs_clobbered, ctx->frame_size);
+	jit_buffer_update(ctx, len);
+
+	return 0;
+}
+
+/* Tell which number of the BPF instruction we are dealing with. */
+static inline s32 get_index_for_insn(const struct jit_context *ctx,
+				     const struct bpf_insn *insn)
+{
+	return (insn - ctx->prog->insnsi);
+}
+
+/*
+ * In most of the cases, the "offset" is read from "insn->off". However,
+ * if it is an unconditional BPF_JMP32, then it comes from "insn->imm".
+ *
+ * (Courtesy of "cpu=v4" support)
+ */
+static inline s32 get_offset(const struct bpf_insn *insn)
+{
+	if ((BPF_CLASS(insn->code) == BPF_JMP32) &&
+	    (BPF_OP(insn->code) == BPF_JA))
+		return insn->imm;
+	else
+		return insn->off;
+}
+
+/*
+ * Determine to which number of the BPF instruction we're jumping to.
+ *
+ * The "offset" is interpreted as the "number" of BPF instructions
+ * from the _next_ BPF instruction. e.g.:
+ *
+ *  4 means 4 instructions after  the next insn
+ *  0 means 0 instructions after  the next insn -> fallthrough.
+ * -1 means 1 instruction  before the next insn -> jmp to current insn.
+ *
+ *  Another way to look at this, "offset" is the number of instructions
+ *  that exist between the current instruction and the target instruction.
+ *
+ *  It is worth noting that a "mov r,i64", which is 16-byte long, is
+ *  treated as two instructions long, therefore "offset" needn't be
+ *  treated specially for those. Everything is uniform.
+ */
+static inline s32 get_target_index_for_insn(const struct jit_context *ctx,
+					    const struct bpf_insn *insn)
+{
+	return (get_index_for_insn(ctx, insn) + 1) + get_offset(insn);
+}
+
+/* Is there an immediate operand encoded in the "insn"? */
+static inline bool has_imm(const struct bpf_insn *insn)
+{
+	return BPF_SRC(insn->code) == BPF_K;
+}
+
+/* Is the last BPF instruction? */
+static inline bool is_last_insn(const struct bpf_prog *prog, u32 idx)
+{
+	return idx == (prog->len - 1);
+}
+
+/*
+ * Invocation of this function, conditionally signals the need for
+ * an extra pass. The conditions that must be met are:
+ *
+ * 1. The current pass itself shouldn't be an extra pass.
+ * 2. The stream of bytes being JITed must come from a user program.
+ */
+static inline void set_need_for_extra_pass(struct jit_context *ctx)
+{
+	if (!ctx->is_extra_pass)
+		ctx->need_extra_pass = ctx->user_bpf_prog;
+}
+
+/*
+ * Check if the "size" is valid and then transfer the control to
+ * the back-end for the swap.
+ */
+static int handle_swap(u8 *buf, u8 rd, u8 size, u8 endian,
+		       bool force, bool do_zext, u8 *len)
+{
+	/* Sanity check on the size. */
+	switch (size) {
+	case 16:
+	case 32:
+	case 64:
+		break;
+	default:
+		pr_err("bpf-jit: invalid size for swap.\n");
+		return -EINVAL;
+	}
+
+	*len = gen_swap(buf, rd, size, endian, force, do_zext);
+
+	return 0;
+}
+
+/* Checks if the (instruction) index is in valid range. */
+static inline bool check_insn_idx_valid(const struct jit_context *ctx,
+					const s32 idx)
+{
+	return (idx >= 0 && idx < ctx->prog->len);
+}
+
+/*
+ * Decouple the back-end from BPF by converting BPF conditions
+ * to internal enum. ARC_CC_* start from 0 and are used as index
+ * to an array. BPF_J* usage must end after this conversion.
+ */
+static int bpf_cond_to_arc(const u8 op, u8 *arc_cc)
+{
+	switch (op) {
+	case BPF_JA:
+		*arc_cc = ARC_CC_AL;
+		break;
+	case BPF_JEQ:
+		*arc_cc = ARC_CC_EQ;
+		break;
+	case BPF_JGT:
+		*arc_cc = ARC_CC_UGT;
+		break;
+	case BPF_JGE:
+		*arc_cc = ARC_CC_UGE;
+		break;
+	case BPF_JSET:
+		*arc_cc = ARC_CC_SET;
+		break;
+	case BPF_JNE:
+		*arc_cc = ARC_CC_NE;
+		break;
+	case BPF_JSGT:
+		*arc_cc = ARC_CC_SGT;
+		break;
+	case BPF_JSGE:
+		*arc_cc = ARC_CC_SGE;
+		break;
+	case BPF_JLT:
+		*arc_cc = ARC_CC_ULT;
+		break;
+	case BPF_JLE:
+		*arc_cc = ARC_CC_ULE;
+		break;
+	case BPF_JSLT:
+		*arc_cc = ARC_CC_SLT;
+		break;
+	case BPF_JSLE:
+		*arc_cc = ARC_CC_SLE;
+		break;
+	default:
+		pr_err("bpf-jit: can't handle condition 0x%02X\n", op);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * Check a few things for a supposedly "jump" instruction:
+ *
+ * 0. "insn" is a "jump" instruction, but not the "call/exit" variant.
+ * 1. The current "insn" index is in valid range.
+ * 2. The index of target instruction is in valid range.
+ */
+static int check_bpf_jump(const struct jit_context *ctx,
+			  const struct bpf_insn *insn)
+{
+	const u8 class = BPF_CLASS(insn->code);
+	const u8 op = BPF_OP(insn->code);
+
+	/* Must be a jmp(32) instruction that is not a "call/exit". */
+	if ((class != BPF_JMP && class != BPF_JMP32) ||
+	    (op == BPF_CALL || op == BPF_EXIT)) {
+		pr_err("bpf-jit: not a jump instruction.\n");
+		return -EINVAL;
+	}
+
+	if (!check_insn_idx_valid(ctx, get_index_for_insn(ctx, insn))) {
+		pr_err("bpf-jit: the bpf jump insn is not in prog.\n");
+		return -EINVAL;
+	}
+
+	if (!check_insn_idx_valid(ctx, get_target_index_for_insn(ctx, insn))) {
+		pr_err("bpf-jit: bpf jump label is out of range.\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Based on input "insn", consult "ctx->bpf2insn" to get the
+ * related index (offset) of the translation in JIT stream.
+ */
+static u32 get_curr_jit_off(const struct jit_context *ctx,
+			    const struct bpf_insn *insn)
+{
+	const s32 idx = get_index_for_insn(ctx, insn);
+#ifdef ARC_BPF_JIT_DEBUG
+	BUG_ON(!offsets_available(ctx) || !check_insn_idx_valid(ctx, idx));
+#endif
+	return ctx->bpf2insn[idx];
+}
+
+/*
+ * The input "insn" must be a jump instruction.
+ *
+ * Based on input "insn", consult "ctx->bpf2insn" to get the
+ * related JIT index (offset) of "target instruction" that
+ * "insn" would jump to.
+ */
+static u32 get_targ_jit_off(const struct jit_context *ctx,
+			    const struct bpf_insn *insn)
+{
+	const s32 tidx = get_target_index_for_insn(ctx, insn);
+#ifdef ARC_BPF_JIT_DEBUG
+	BUG_ON(!offsets_available(ctx) || !check_insn_idx_valid(ctx, tidx));
+#endif
+	return ctx->bpf2insn[tidx];
+}
+
+/*
+ * This function will return 0 for a feasible jump.
+ *
+ * Consult the back-end to check if it finds it feasible to emit
+ * the necessary instructions based on "cond" and the displacement
+ * between the "from_off" and the "to_off".
+ */
+static int feasible_jit_jump(u32 from_off, u32 to_off, u8 cond, bool j32)
+{
+	int ret = 0;
+
+	if (j32) {
+		if (!check_jmp_32(from_off, to_off, cond))
+			ret = -EFAULT;
+	} else {
+		if (!check_jmp_64(from_off, to_off, cond))
+			ret = -EFAULT;
+	}
+
+	if (ret != 0)
+		pr_err("bpf-jit: the JIT displacement is not OK.\n");
+
+	return ret;
+}
+
+/*
+ * This jump handler performs the following steps:
+ *
+ * 1. Compute ARC's internal condition code from BPF's
+ * 2. Determine the bitness of the operation (32 vs. 64)
+ * 3. Sanity check on BPF stream
+ * 4. Sanity check on what is supposed to be JIT's displacement
+ * 5. And finally, emit the necessary instructions
+ *
+ * The last two steps are performed through the back-end.
+ * The value of steps 1 and 2 are necessary inputs for the back-end.
+ */
+static int handle_jumps(const struct jit_context *ctx,
+			const struct bpf_insn *insn,
+			u8 *len)
+{
+	u8 cond;
+	int ret = 0;
+	u8 *buf = effective_jit_buf(ctx);
+	const bool j32 = (BPF_CLASS(insn->code) == BPF_JMP32) ? true : false;
+	const u8 rd = insn->dst_reg;
+	u8 rs = insn->src_reg;
+	u32 curr_off = 0, targ_off = 0;
+
+	*len = 0;
+
+	/* Map the BPF condition to internal enum. */
+	CHECK_RET(bpf_cond_to_arc(BPF_OP(insn->code), &cond));
+
+	/* Sanity check on the BPF byte stream. */
+	CHECK_RET(check_bpf_jump(ctx, insn));
+
+	/*
+	 * Move the immediate into a temporary register _now_ for 2 reasons:
+	 *
+	 * 1. "gen_jmp_{32,64}()" deal with operands in registers.
+	 *
+	 * 2. The "len" parameter will grow so that the current jit offset
+	 *    (curr_off) will have increased to a point where the necessary
+	 *    instructions can be inserted by "gen_jmp_{32,64}()".
+	 */
+	if (has_imm(insn) && cond != ARC_CC_AL) {
+		if (j32) {
+			*len += mov_r32_i32(BUF(buf, *len), JIT_REG_TMP,
+					    insn->imm);
+		} else {
+			*len += mov_r64_i32(BUF(buf, *len), JIT_REG_TMP,
+					    insn->imm);
+		}
+		rs = JIT_REG_TMP;
+	}
+
+	/* If the offsets are known, check if the branch can occur. */
+	if (offsets_available(ctx)) {
+		curr_off = get_curr_jit_off(ctx, insn) + *len;
+		targ_off = get_targ_jit_off(ctx, insn);
+
+		/* Sanity check on the back-end side. */
+		CHECK_RET(feasible_jit_jump(curr_off, targ_off, cond, j32));
+	}
+
+	if (j32) {
+		*len += gen_jmp_32(BUF(buf, *len), rd, rs, cond,
+				   curr_off, targ_off);
+	} else {
+		*len += gen_jmp_64(BUF(buf, *len), rd, rs, cond,
+				   curr_off, targ_off);
+	}
+
+	return ret;
+}
+
+/* Jump to translated epilogue address. */
+static int handle_jmp_epilogue(struct jit_context *ctx,
+			       const struct bpf_insn *insn, u8 *len)
+{
+	u8 *buf = effective_jit_buf(ctx);
+	u32 curr_off = 0, epi_off = 0;
+
+	/* Check the offset only if the data is available. */
+	if (offsets_available(ctx)) {
+		curr_off = get_curr_jit_off(ctx, insn);
+		epi_off = ctx->epilogue_offset;
+
+		if (!check_jmp_64(curr_off, epi_off, ARC_CC_AL)) {
+			pr_err("bpf-jit: epilogue offset is not valid.\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Jump to "epilogue offset" (rd and rs don't matter). */
+	*len = gen_jmp_64(buf, 0, 0, ARC_CC_AL, curr_off, epi_off);
+
+	return 0;
+}
+
+/* Try to get the resolved address and generate the instructions. */
+static int handle_call(struct jit_context *ctx,
+		       const struct bpf_insn *insn,
+		       u8 *len)
+{
+	int  ret;
+	bool in_kernel_func, fixed = false;
+	u64  addr = 0;
+	u8  *buf = effective_jit_buf(ctx);
+
+	ret = bpf_jit_get_func_addr(ctx->prog, insn, ctx->is_extra_pass,
+				    &addr, &fixed);
+	if (ret < 0) {
+		pr_err("bpf-jit: can't get the address for call.\n");
+		return ret;
+	}
+	in_kernel_func = (fixed ? true : false);
+
+	/* No valuable address retrieved (yet). */
+	if (!fixed && !addr)
+		set_need_for_extra_pass(ctx);
+
+	*len = gen_func_call(buf, (ARC_ADDR)addr, in_kernel_func);
+
+	if (insn->src_reg != BPF_PSEUDO_CALL) {
+		/* Assigning ABI's return reg to JIT's return reg. */
+		*len += arc_to_bpf_return(BUF(buf, *len));
+	}
+
+	return 0;
+}
+
+/*
+ * Try to generate instructions for loading a 64-bit immediate.
+ * These sort of instructions are usually associated with the 64-bit
+ * relocations: R_BPF_64_64. Therefore, signal the need for an extra
+ * pass if the circumstances are right.
+ */
+static int handle_ld_imm64(struct jit_context *ctx,
+			   const struct bpf_insn *insn,
+			   u8 *len)
+{
+	const s32 idx = get_index_for_insn(ctx, insn);
+	u8 *buf = effective_jit_buf(ctx);
+
+	/* We're about to consume 2 VM instructions. */
+	if (is_last_insn(ctx->prog, idx)) {
+		pr_err("bpf-jit: need more data for 64-bit immediate.\n");
+		return -EINVAL;
+	}
+
+	*len = mov_r64_i64(buf, insn->dst_reg, insn->imm, (insn + 1)->imm);
+
+	if (bpf_pseudo_func(insn))
+		set_need_for_extra_pass(ctx);
+
+	return 0;
+}
+
+/*
+ * Handles one eBPF instruction at a time. To make this function faster,
+ * it does not call "jit_buffer_check()". Else, it would call it for every
+ * instruction. As a result, it should not be invoked directly. Only
+ * "handle_body()", that has already executed the "check", may call this
+ * function.
+ *
+ * If the "ret" value is negative, something has went wrong. Else,
+ * it mostly holds the value 0 and rarely 1. Number 1 signals
+ * the loop in "handle_body()" to skip the next instruction, because
+ * it has been consumed as part of a 64-bit immediate value.
+ */
+static int handle_insn(struct jit_context *ctx, u32 idx)
+{
+	const struct bpf_insn *insn = &ctx->prog->insnsi[idx];
+	const u8  code = insn->code;
+	const u8  dst  = insn->dst_reg;
+	const u8  src  = insn->src_reg;
+	const s16 off  = insn->off;
+	const s32 imm  = insn->imm;
+	u8 *buf = effective_jit_buf(ctx);
+	u8  len = 0;
+	int ret = 0;
+
+	switch (code) {
+	/* dst += src (32-bit) */
+	case BPF_ALU | BPF_ADD | BPF_X:
+		len = add_r32(buf, dst, src);
+		break;
+	/* dst += imm (32-bit) */
+	case BPF_ALU | BPF_ADD | BPF_K:
+		len = add_r32_i32(buf, dst, imm);
+		break;
+	/* dst -= src (32-bit) */
+	case BPF_ALU | BPF_SUB | BPF_X:
+		len = sub_r32(buf, dst, src);
+		break;
+	/* dst -= imm (32-bit) */
+	case BPF_ALU | BPF_SUB | BPF_K:
+		len = sub_r32_i32(buf, dst, imm);
+		break;
+	/* dst = -dst (32-bit) */
+	case BPF_ALU | BPF_NEG:
+		len = neg_r32(buf, dst);
+		break;
+	/* dst *= src (32-bit) */
+	case BPF_ALU | BPF_MUL | BPF_X:
+		len = mul_r32(buf, dst, src);
+		break;
+	/* dst *= imm (32-bit) */
+	case BPF_ALU | BPF_MUL | BPF_K:
+		len = mul_r32_i32(buf, dst, imm);
+		break;
+	/* dst /= src (32-bit) */
+	case BPF_ALU | BPF_DIV | BPF_X:
+		len = div_r32(buf, dst, src, off == 1);
+		break;
+	/* dst /= imm (32-bit) */
+	case BPF_ALU | BPF_DIV | BPF_K:
+		len = div_r32_i32(buf, dst, imm, off == 1);
+		break;
+	/* dst %= src (32-bit) */
+	case BPF_ALU | BPF_MOD | BPF_X:
+		len = mod_r32(buf, dst, src, off == 1);
+		break;
+	/* dst %= imm (32-bit) */
+	case BPF_ALU | BPF_MOD | BPF_K:
+		len = mod_r32_i32(buf, dst, imm, off == 1);
+		break;
+	/* dst &= src (32-bit) */
+	case BPF_ALU | BPF_AND | BPF_X:
+		len = and_r32(buf, dst, src);
+		break;
+	/* dst &= imm (32-bit) */
+	case BPF_ALU | BPF_AND | BPF_K:
+		len = and_r32_i32(buf, dst, imm);
+		break;
+	/* dst |= src (32-bit) */
+	case BPF_ALU | BPF_OR | BPF_X:
+		len = or_r32(buf, dst, src);
+		break;
+	/* dst |= imm (32-bit) */
+	case BPF_ALU | BPF_OR | BPF_K:
+		len = or_r32_i32(buf, dst, imm);
+		break;
+	/* dst ^= src (32-bit) */
+	case BPF_ALU | BPF_XOR | BPF_X:
+		len = xor_r32(buf, dst, src);
+		break;
+	/* dst ^= imm (32-bit) */
+	case BPF_ALU | BPF_XOR | BPF_K:
+		len = xor_r32_i32(buf, dst, imm);
+		break;
+	/* dst <<= src (32-bit) */
+	case BPF_ALU | BPF_LSH | BPF_X:
+		len = lsh_r32(buf, dst, src);
+		break;
+	/* dst <<= imm (32-bit) */
+	case BPF_ALU | BPF_LSH | BPF_K:
+		len = lsh_r32_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (32-bit) [unsigned] */
+	case BPF_ALU | BPF_RSH | BPF_X:
+		len = rsh_r32(buf, dst, src);
+		break;
+	/* dst >>= imm (32-bit) [unsigned] */
+	case BPF_ALU | BPF_RSH | BPF_K:
+		len = rsh_r32_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (32-bit) [signed] */
+	case BPF_ALU | BPF_ARSH | BPF_X:
+		len = arsh_r32(buf, dst, src);
+		break;
+	/* dst >>= imm (32-bit) [signed] */
+	case BPF_ALU | BPF_ARSH | BPF_K:
+		len = arsh_r32_i32(buf, dst, imm);
+		break;
+	/* dst = src (32-bit) */
+	case BPF_ALU | BPF_MOV | BPF_X:
+		len = mov_r32(buf, dst, src, (u8)off);
+		break;
+	/* dst = imm32 (32-bit) */
+	case BPF_ALU | BPF_MOV | BPF_K:
+		len = mov_r32_i32(buf, dst, imm);
+		break;
+	/* dst = swap(dst) */
+	case BPF_ALU   | BPF_END | BPF_FROM_LE:
+	case BPF_ALU   | BPF_END | BPF_FROM_BE:
+	case BPF_ALU64 | BPF_END | BPF_FROM_LE: {
+		CHECK_RET(handle_swap(buf, dst, imm, BPF_SRC(code),
+				      BPF_CLASS(code) == BPF_ALU64,
+				      ctx->do_zext, &len));
+		break;
+	}
+	/* dst += src (64-bit) */
+	case BPF_ALU64 | BPF_ADD | BPF_X:
+		len = add_r64(buf, dst, src);
+		break;
+	/* dst += imm32 (64-bit) */
+	case BPF_ALU64 | BPF_ADD | BPF_K:
+		len = add_r64_i32(buf, dst, imm);
+		break;
+	/* dst -= src (64-bit) */
+	case BPF_ALU64 | BPF_SUB | BPF_X:
+		len = sub_r64(buf, dst, src);
+		break;
+	/* dst -= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_SUB | BPF_K:
+		len = sub_r64_i32(buf, dst, imm);
+		break;
+	/* dst = -dst (64-bit) */
+	case BPF_ALU64 | BPF_NEG:
+		len = neg_r64(buf, dst);
+		break;
+	/* dst *= src (64-bit) */
+	case BPF_ALU64 | BPF_MUL | BPF_X:
+		len = mul_r64(buf, dst, src);
+		break;
+	/* dst *= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_MUL | BPF_K:
+		len = mul_r64_i32(buf, dst, imm);
+		break;
+	/* dst &= src (64-bit) */
+	case BPF_ALU64 | BPF_AND | BPF_X:
+		len = and_r64(buf, dst, src);
+		break;
+	/* dst &= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_AND | BPF_K:
+		len = and_r64_i32(buf, dst, imm);
+		break;
+	/* dst |= src (64-bit) */
+	case BPF_ALU64 | BPF_OR | BPF_X:
+		len = or_r64(buf, dst, src);
+		break;
+	/* dst |= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_OR | BPF_K:
+		len = or_r64_i32(buf, dst, imm);
+		break;
+	/* dst ^= src (64-bit) */
+	case BPF_ALU64 | BPF_XOR | BPF_X:
+		len = xor_r64(buf, dst, src);
+		break;
+	/* dst ^= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_XOR | BPF_K:
+		len = xor_r64_i32(buf, dst, imm);
+		break;
+	/* dst <<= src (64-bit) */
+	case BPF_ALU64 | BPF_LSH | BPF_X:
+		len = lsh_r64(buf, dst, src);
+		break;
+	/* dst <<= imm32 (64-bit) */
+	case BPF_ALU64 | BPF_LSH | BPF_K:
+		len = lsh_r64_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (64-bit) [unsigned] */
+	case BPF_ALU64 | BPF_RSH | BPF_X:
+		len = rsh_r64(buf, dst, src);
+		break;
+	/* dst >>= imm32 (64-bit) [unsigned] */
+	case BPF_ALU64 | BPF_RSH | BPF_K:
+		len = rsh_r64_i32(buf, dst, imm);
+		break;
+	/* dst >>= src (64-bit) [signed] */
+	case BPF_ALU64 | BPF_ARSH | BPF_X:
+		len = arsh_r64(buf, dst, src);
+		break;
+	/* dst >>= imm32 (64-bit) [signed] */
+	case BPF_ALU64 | BPF_ARSH | BPF_K:
+		len = arsh_r64_i32(buf, dst, imm);
+		break;
+	/* dst = src (64-bit) */
+	case BPF_ALU64 | BPF_MOV | BPF_X:
+		len = mov_r64(buf, dst, src, (u8)off);
+		break;
+	/* dst = imm32 (sign extend to 64-bit) */
+	case BPF_ALU64 | BPF_MOV | BPF_K:
+		len = mov_r64_i32(buf, dst, imm);
+		break;
+	/* dst = imm64 */
+	case BPF_LD | BPF_DW | BPF_IMM:
+		CHECK_RET(handle_ld_imm64(ctx, insn, &len));
+		/* Tell the loop to skip the next instruction. */
+		ret = 1;
+		break;
+	/* dst = *(size *)(src + off) */
+	case BPF_LDX | BPF_MEM | BPF_W:
+	case BPF_LDX | BPF_MEM | BPF_H:
+	case BPF_LDX | BPF_MEM | BPF_B:
+	case BPF_LDX | BPF_MEM | BPF_DW:
+		len = load_r(buf, dst, src, off, BPF_SIZE(code), false);
+		break;
+	case BPF_LDX | BPF_MEMSX | BPF_W:
+	case BPF_LDX | BPF_MEMSX | BPF_H:
+	case BPF_LDX | BPF_MEMSX | BPF_B:
+		len = load_r(buf, dst, src, off, BPF_SIZE(code), true);
+		break;
+	/* *(size *)(dst + off) = src */
+	case BPF_STX | BPF_MEM | BPF_W:
+	case BPF_STX | BPF_MEM | BPF_H:
+	case BPF_STX | BPF_MEM | BPF_B:
+	case BPF_STX | BPF_MEM | BPF_DW:
+		len = store_r(buf, src, dst, off, BPF_SIZE(code));
+		break;
+	case BPF_ST | BPF_MEM | BPF_W:
+	case BPF_ST | BPF_MEM | BPF_H:
+	case BPF_ST | BPF_MEM | BPF_B:
+	case BPF_ST | BPF_MEM | BPF_DW:
+		len = store_i(buf, imm, dst, off, BPF_SIZE(code));
+		break;
+	case BPF_JMP   | BPF_JA:
+	case BPF_JMP   | BPF_JEQ  | BPF_X:
+	case BPF_JMP   | BPF_JEQ  | BPF_K:
+	case BPF_JMP   | BPF_JNE  | BPF_X:
+	case BPF_JMP   | BPF_JNE  | BPF_K:
+	case BPF_JMP   | BPF_JSET | BPF_X:
+	case BPF_JMP   | BPF_JSET | BPF_K:
+	case BPF_JMP   | BPF_JGT  | BPF_X:
+	case BPF_JMP   | BPF_JGT  | BPF_K:
+	case BPF_JMP   | BPF_JGE  | BPF_X:
+	case BPF_JMP   | BPF_JGE  | BPF_K:
+	case BPF_JMP   | BPF_JSGT | BPF_X:
+	case BPF_JMP   | BPF_JSGT | BPF_K:
+	case BPF_JMP   | BPF_JSGE | BPF_X:
+	case BPF_JMP   | BPF_JSGE | BPF_K:
+	case BPF_JMP   | BPF_JLT  | BPF_X:
+	case BPF_JMP   | BPF_JLT  | BPF_K:
+	case BPF_JMP   | BPF_JLE  | BPF_X:
+	case BPF_JMP   | BPF_JLE  | BPF_K:
+	case BPF_JMP   | BPF_JSLT | BPF_X:
+	case BPF_JMP   | BPF_JSLT | BPF_K:
+	case BPF_JMP   | BPF_JSLE | BPF_X:
+	case BPF_JMP   | BPF_JSLE | BPF_K:
+	case BPF_JMP32 | BPF_JA:
+	case BPF_JMP32 | BPF_JEQ  | BPF_X:
+	case BPF_JMP32 | BPF_JEQ  | BPF_K:
+	case BPF_JMP32 | BPF_JNE  | BPF_X:
+	case BPF_JMP32 | BPF_JNE  | BPF_K:
+	case BPF_JMP32 | BPF_JSET | BPF_X:
+	case BPF_JMP32 | BPF_JSET | BPF_K:
+	case BPF_JMP32 | BPF_JGT  | BPF_X:
+	case BPF_JMP32 | BPF_JGT  | BPF_K:
+	case BPF_JMP32 | BPF_JGE  | BPF_X:
+	case BPF_JMP32 | BPF_JGE  | BPF_K:
+	case BPF_JMP32 | BPF_JSGT | BPF_X:
+	case BPF_JMP32 | BPF_JSGT | BPF_K:
+	case BPF_JMP32 | BPF_JSGE | BPF_X:
+	case BPF_JMP32 | BPF_JSGE | BPF_K:
+	case BPF_JMP32 | BPF_JLT  | BPF_X:
+	case BPF_JMP32 | BPF_JLT  | BPF_K:
+	case BPF_JMP32 | BPF_JLE  | BPF_X:
+	case BPF_JMP32 | BPF_JLE  | BPF_K:
+	case BPF_JMP32 | BPF_JSLT | BPF_X:
+	case BPF_JMP32 | BPF_JSLT | BPF_K:
+	case BPF_JMP32 | BPF_JSLE | BPF_X:
+	case BPF_JMP32 | BPF_JSLE | BPF_K:
+		CHECK_RET(handle_jumps(ctx, insn, &len));
+		break;
+	case BPF_JMP | BPF_CALL:
+		CHECK_RET(handle_call(ctx, insn, &len));
+		break;
+
+	case BPF_JMP | BPF_EXIT:
+		/* If this is the last instruction, epilogue will follow. */
+		if (is_last_insn(ctx->prog, idx))
+			break;
+		CHECK_RET(handle_jmp_epilogue(ctx, insn, &len));
+		break;
+	default:
+		pr_err("bpf-jit: can't handle instruction code 0x%02X\n", code);
+		return -EOPNOTSUPP;
+	}
+
+	if (BPF_CLASS(code) == BPF_ALU) {
+		/*
+		 * Skip the "swap" instructions. Even 64-bit swaps are of type
+		 * BPF_ALU (and not BPF_ALU64). Therefore, for the swaps, one
+		 * has to look at the "size" of the operations rather than the
+		 * ALU type. "gen_swap()" specifically takes care of that.
+		 */
+		if (BPF_OP(code) != BPF_END && ctx->do_zext)
+			len += zext(BUF(buf, len), dst);
+	}
+
+	jit_buffer_update(ctx, len);
+
+	return ret;
+}
+
+static int handle_body(struct jit_context *ctx)
+{
+	int ret;
+	bool populate_bpf2insn = false;
+	const struct bpf_prog *prog = ctx->prog;
+
+	CHECK_RET(jit_buffer_check(ctx));
+
+	/*
+	 * Record the mapping for the instructions during the dry-run.
+	 * Doing it this way allows us to have the mapping ready for
+	 * the jump instructions during the real compilation phase.
+	 */
+	if (!ctx->emit)
+		populate_bpf2insn = true;
+
+	for (u32 i = 0; i < prog->len; i++) {
+		/* During the dry-run, jit.len grows gradually per BPF insn. */
+		if (populate_bpf2insn)
+			ctx->bpf2insn[i] = ctx->jit.len;
+
+		CHECK_RET(handle_insn(ctx, i));
+		if (ret > 0) {
+			/* "ret" is 1 if two (64-bit) chunks were consumed. */
+			ctx->bpf2insn[i + 1] = ctx->bpf2insn[i];
+			i++;
+		}
+	}
+
+	/* If bpf2insn had to be populated, then it is done at this point. */
+	if (populate_bpf2insn)
+		ctx->bpf2insn_valid = true;
+
+	return 0;
+}
+
+/*
+ * Initialize the memory with "unimp_s" which is the mnemonic for
+ * "unimplemented" instruction and always raises an exception.
+ *
+ * The instruction is 2 bytes. If "size" is odd, there is not much
+ * that can be done about the last byte in "area". Because, the
+ * CPU always fetches instructions in two bytes. Therefore, the
+ * byte beyond the last one is going to accompany it during a
+ * possible fetch. In the most likely case of a little endian
+ * system, that beyond-byte will become the major opcode and
+ * we have no control over its initialisation.
+ */
+static void fill_ill_insn(void *area, unsigned int size)
+{
+	const u16 unimp_s = 0x79e0;
+
+	if (size & 1) {
+		*((u8 *)area + (size - 1)) = 0xff;
+		size -= 1;
+	}
+
+	memset16(area, unimp_s, size >> 1);
+}
+
+/* Piece of memory that can be allocated at the beginning of jit_prepare(). */
+static int jit_prepare_early_mem_alloc(struct jit_context *ctx)
+{
+	ctx->bpf2insn = kcalloc(ctx->prog->len, sizeof(ctx->jit.len),
+				GFP_KERNEL);
+
+	if (!ctx->bpf2insn) {
+		pr_err("bpf-jit: could not allocate memory for "
+		       "mapping of the instructions.\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/*
+ * Memory allocations that rely on parameters known at the end of
+ * jit_prepare().
+ */
+static int jit_prepare_final_mem_alloc(struct jit_context *ctx)
+{
+	const size_t alignment = sizeof(u32);
+
+	ctx->bpf_header = bpf_jit_binary_alloc(ctx->jit.len, &ctx->jit.buf,
+					       alignment, fill_ill_insn);
+	if (!ctx->bpf_header) {
+		pr_err("bpf-jit: could not allocate memory for translation.\n");
+		return -ENOMEM;
+	}
+
+	if (ctx->need_extra_pass) {
+		ctx->jit_data = kzalloc(sizeof(*ctx->jit_data), GFP_KERNEL);
+		if (!ctx->jit_data)
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/*
+ * The first phase of the translation without actually emitting any
+ * instruction. It helps in getting a forecast on some aspects, such
+ * as the length of the whole program or where the epilogue starts.
+ *
+ * Whenever the necessary parameters are known, memories are allocated.
+ */
+static int jit_prepare(struct jit_context *ctx)
+{
+	int ret;
+
+	/* Dry run. */
+	ctx->emit = false;
+
+	CHECK_RET(jit_prepare_early_mem_alloc(ctx));
+
+	/* Get the length of prologue section after some register analysis. */
+	analyze_reg_usage(ctx);
+	CHECK_RET(handle_prologue(ctx));
+
+	CHECK_RET(handle_body(ctx));
+
+	/* Record at which offset epilogue begins. */
+	ctx->epilogue_offset = ctx->jit.len;
+
+	/* Process the epilogue section now. */
+	CHECK_RET(handle_epilogue(ctx));
+
+	CHECK_RET(jit_prepare_final_mem_alloc(ctx));
+
+	return 0;
+}
+
+/*
+ * jit_compile() is the real compilation phase. jit_prepare() is
+ * invoked before jit_compile() as a dry-run to make sure everything
+ * will go OK and allocate the necessary memory.
+ *
+ * In the end, jit_compile() checks if it has produced the same number
+ * of instructions as jit_prepare() would.
+ */
+static int jit_compile(struct jit_context *ctx)
+{
+	int ret;
+
+	/* Let there be code. */
+	ctx->emit = true;
+
+	CHECK_RET(handle_prologue(ctx));
+
+	CHECK_RET(handle_body(ctx));
+
+	CHECK_RET(handle_epilogue(ctx));
+
+	if (ctx->jit.index != ctx->jit.len) {
+		pr_err("bpf-jit: divergence between the phases; "
+		       "%u vs. %u (bytes).\n",
+		       ctx->jit.len, ctx->jit.index);
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+/*
+ * Calling this function implies a successful JIT. A successful
+ * translation is signaled by setting the right parameters:
+ *
+ * prog->jited=1, prog->jited_len=..., prog->bpf_func=...
+ */
+static int jit_finalize(struct jit_context *ctx)
+{
+	struct bpf_prog *prog = ctx->prog;
+
+	/* We're going to need this information for the "do_extra_pass()". */
+	if (ctx->need_extra_pass) {
+		ctx->jit_data->bpf_header = ctx->bpf_header;
+		ctx->jit_data->bpf2insn = ctx->bpf2insn;
+		prog->aux->jit_data = (void *)ctx->jit_data;
+	} else {
+		/*
+		 * If things seem finalised, then mark the JITed memory
+		 * as R-X and flush it.
+		 */
+		if (bpf_jit_binary_lock_ro(ctx->bpf_header)) {
+			pr_err("bpf-jit: Could not lock the JIT memory.\n");
+			return -EFAULT;
+		}
+		flush_icache_range((unsigned long)ctx->bpf_header,
+				   (unsigned long)
+				   BUF(ctx->jit.buf, ctx->jit.len));
+		prog->aux->jit_data = NULL;
+		bpf_prog_fill_jited_linfo(prog, ctx->bpf2insn);
+	}
+
+	ctx->success = true;
+	prog->bpf_func = (void *)ctx->jit.buf;
+	prog->jited_len = ctx->jit.len;
+	prog->jited = 1;
+
+	jit_ctx_cleanup(ctx);
+	jit_dump(ctx);
+
+	return 0;
+}
+
+/*
+ * A lenient verification for the existence of JIT context in "prog".
+ * Apparently the JIT internals, namely jit_subprogs() in bpf/verifier.c,
+ * may request for a second compilation although nothing needs to be done.
+ */
+static inline int check_jit_context(const struct bpf_prog *prog)
+{
+	if (!prog->aux->jit_data) {
+		pr_notice("bpf-jit: no jit data for the extra pass.\n");
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/* Reuse the previous pass's data. */
+static int jit_resume_context(struct jit_context *ctx)
+{
+	struct arc_jit_data *jdata =
+		(struct arc_jit_data *)ctx->prog->aux->jit_data;
+
+	if (!jdata) {
+		pr_err("bpf-jit: no jit data for the extra pass.\n");
+		return -EINVAL;
+	}
+
+	ctx->jit.buf = (u8 *)ctx->prog->bpf_func;
+	ctx->jit.len = ctx->prog->jited_len;
+	ctx->bpf_header = jdata->bpf_header;
+	ctx->bpf2insn = (u32 *)jdata->bpf2insn;
+	ctx->bpf2insn_valid = ctx->bpf2insn ? true : false;
+	ctx->jit_data = jdata;
+
+	return 0;
+}
+
+/*
+ * Patch in the new addresses. The instructions of interest are:
+ *
+ * - call
+ * - ld r64, imm64
+ *
+ * For "call"s, it resolves the addresses one more time through the
+ * handle_call().
+ *
+ * For 64-bit immediate loads, it just retranslates them, because the BPF
+ * core in kernel might have changed the value since the normal pass.
+ */
+static int jit_patch_relocations(struct jit_context *ctx)
+{
+	const u8 bpf_opc_call = BPF_JMP | BPF_CALL;
+	const u8 bpf_opc_ldi64 = BPF_LD | BPF_DW | BPF_IMM;
+	const struct bpf_prog *prog = ctx->prog;
+	int ret;
+
+	ctx->emit = true;
+	for (u32 i = 0; i < prog->len; i++) {
+		const struct bpf_insn *insn = &prog->insnsi[i];
+		u8 dummy;
+		/*
+		 * Adjust "ctx.jit.index", so "gen_*()" functions below
+		 * can use it for their output addresses.
+		 */
+		ctx->jit.index = ctx->bpf2insn[i];
+
+		if (insn->code == bpf_opc_call) {
+			CHECK_RET(handle_call(ctx, insn, &dummy));
+		} else if (insn->code == bpf_opc_ldi64) {
+			CHECK_RET(handle_ld_imm64(ctx, insn, &dummy));
+			/* Skip the next instruction. */
+			++i;
+		}
+	}
+	return 0;
+}
+
+/*
+ * A normal pass that involves a "dry-run" phase, jit_prepare(),
+ * to get the necessary data for the real compilation phase,
+ * jit_compile().
+ */
+static struct bpf_prog *do_normal_pass(struct bpf_prog *prog)
+{
+	struct jit_context ctx;
+
+	/* Bail out if JIT is disabled. */
+	if (!prog->jit_requested)
+		return prog;
+
+	if (jit_ctx_init(&ctx, prog)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	/* Get the lengths and allocate buffer. */
+	if (jit_prepare(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_compile(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_finalize(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	return ctx.prog;
+}
+
+/*
+ * If there are multi-function BPF programs that call each other,
+ * their translated addresses are not known all at once. Therefore,
+ * an extra pass is needed to consult the bpf_jit_get_func_addr()
+ * again to get the newly translated addresses in order to resolve
+ * the "call"s.
+ */
+static struct bpf_prog *do_extra_pass(struct bpf_prog *prog)
+{
+	struct jit_context ctx;
+
+	/* Skip if there's no context to resume from. */
+	if (check_jit_context(prog))
+		return prog;
+
+	if (jit_ctx_init(&ctx, prog)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_resume_context(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_patch_relocations(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	if (jit_finalize(&ctx)) {
+		jit_ctx_cleanup(&ctx);
+		return prog;
+	}
+
+	return ctx.prog;
+}
+
+/*
+ * This function may be invoked twice for the same stream of BPF
+ * instructions. The "extra pass" happens, when there are
+ * (re)locations involved that their addresses are not known
+ * during the first run.
+ */
+struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
+{
+	vm_dump(prog);
+
+	/* Was this program already translated? */
+	if (!prog->jited)
+		return do_normal_pass(prog);
+	else
+		return do_extra_pass(prog);
+
+	return prog;
+}
diff --git a/arch/arc/oprofile/Makefile b/arch/arc/oprofile/Makefile
deleted file mode 100644
index 698367bb41d0..000000000000
--- a/arch/arc/oprofile/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_OPROFILE) += oprofile.o
-
-DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
-		oprof.o cpu_buffer.o buffer_sync.o \
-		event_buffer.o oprofile_files.o \
-		oprofilefs.o oprofile_stats.o \
-		timer_int.o )
-
-oprofile-y	:= $(DRIVER_OBJS) common.o
diff --git a/arch/arc/oprofile/common.c b/arch/arc/oprofile/common.c
deleted file mode 100644
index 86bf5899533b..000000000000
--- a/arch/arc/oprofile/common.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * Based on orig code from @author John Levon <levon@movementarian.org>
- */
-
-#include <linux/oprofile.h>
-#include <linux/perf_event.h>
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
-	/*
-	 * A failure here, forces oprofile core to switch to Timer based PC
-	 * sampling, which will happen if say perf is not enabled/available
-	 */
-	return oprofile_perf_init(ops);
-}
-
-void oprofile_arch_exit(void)
-{
-	oprofile_perf_exit();
-}
diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c
index 63ea5a606ecd..1feb990a56bc 100644
--- a/arch/arc/plat-axs10x/axs10x.c
+++ b/arch/arc/plat-axs10x/axs10x.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/of_fdt.h>
-#include <linux/of_platform.h>
 #include <linux/libfdt.h>
 
 #include <asm/asm-offsets.h>
@@ -50,7 +49,7 @@ static void __init axs10x_enable_gpio_intc_wire(void)
 	 * Current implementation of "irq-dw-apb-ictl" driver doesn't work well
 	 * with stacked INTCs. In particular problem happens if its master INTC
 	 * not yet instantiated. See discussion here -
-	 * https://lkml.org/lkml/2015/3/4/755
+	 * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com
 	 *
 	 * So setup the first gpio block as a passive pass thru and hide it from
 	 * DT hardware topology - connect MB intc directly to cpu intc
diff --git a/arch/arc/plat-eznps/Kconfig b/arch/arc/plat-eznps/Kconfig
deleted file mode 100644
index a376a50d3fea..000000000000
--- a/arch/arc/plat-eznps/Kconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.rst.
-#
-
-menuconfig ARC_PLAT_EZNPS
-	bool "\"EZchip\" ARC dev platform"
-	select CPU_BIG_ENDIAN
-	select CLKSRC_NPS
-	select EZNPS_GIC
-	select EZCHIP_NPS_MANAGEMENT_ENET if ETHERNET
-	help
-	  Support for EZchip development platforms,
-	  based on ARC700 cores.
-	  We handle few flavors:
-	    - Hardware Emulator AKA HE which is FPGA based chassis
-	    - Simulator based on MetaWare nSIM
-	    - NPS400 chip based on ASIC
-
-config EZNPS_MTM_EXT
-	bool "ARC-EZchip MTM Extensions"
-	select CPUMASK_OFFSTACK
-	depends on ARC_PLAT_EZNPS && SMP
-	default y
-	help
-	  Here we add new hierarchy for CPUs topology.
-	  We got:
-	    Core
-	    Thread
-	  At the new thread level each CPU represent one HW thread.
-	  At highest hierarchy each core contain 16 threads,
-	  any of them seem like CPU from Linux point of view.
-	  All threads within same core share the execution unit of the
-	  core and HW scheduler round robin between them.
-
-config EZNPS_MEM_ERROR_ALIGN
-	bool "ARC-EZchip Memory error as an exception"
-	depends on EZNPS_MTM_EXT
-	default n
-	help
-	  On the real chip of the NPS, user memory errors are handled
-	  as a machine check exception, which is fatal, whereas on
-	  simulator platform for NPS, is handled as a Level 2 interrupt
-	  (just a stock ARC700) which is recoverable. This option makes
-	  simulator behave like hardware.
-
-config EZNPS_SHARED_AUX_REGS
-	bool "ARC-EZchip Shared Auxiliary Registers Per Core"
-	depends on ARC_PLAT_EZNPS
-	default y
-	help
-	  On the real chip of the NPS, auxiliary registers are shared between
-	  all the cpus of the core, whereas on simulator platform for NPS,
-	  each cpu has a different set of auxiliary registers. Configuration
-	  should be unset if auxiliary registers are not shared between the cpus
-	  of the core, so there will be a need to initialize them per cpu.
diff --git a/arch/arc/plat-eznps/Makefile b/arch/arc/plat-eznps/Makefile
deleted file mode 100644
index ebb9723002cf..000000000000
--- a/arch/arc/plat-eznps/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-obj-y := entry.o platform.o ctop.o
-obj-$(CONFIG_SMP) += smp.o
-obj-$(CONFIG_EZNPS_MTM_EXT) += mtm.o
diff --git a/arch/arc/plat-eznps/ctop.c b/arch/arc/plat-eznps/ctop.c
deleted file mode 100644
index b398e6e838a9..000000000000
--- a/arch/arc/plat-eznps/ctop.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright(c) 2015 EZchip Technologies.
- */
-
-#include <linux/sched.h>
-#include <asm/processor.h>
-#include <plat/ctop.h>
-
-void dp_save_restore(struct task_struct *prev, struct task_struct *next)
-{
-	struct eznps_dp *prev_task_dp = &prev->thread.dp;
-	struct eznps_dp *next_task_dp = &next->thread.dp;
-
-	/* Here we save all Data Plane related auxiliary registers */
-	prev_task_dp->eflags = read_aux_reg(CTOP_AUX_EFLAGS);
-	write_aux_reg(CTOP_AUX_EFLAGS, next_task_dp->eflags);
-
-	prev_task_dp->gpa1 = read_aux_reg(CTOP_AUX_GPA1);
-	write_aux_reg(CTOP_AUX_GPA1, next_task_dp->gpa1);
-}
diff --git a/arch/arc/plat-eznps/entry.S b/arch/arc/plat-eznps/entry.S
deleted file mode 100644
index 3f18c0108e72..000000000000
--- a/arch/arc/plat-eznps/entry.S
+++ /dev/null
@@ -1,60 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*******************************************************************************
-
-  EZNPS CPU startup Code
-  Copyright(c) 2012 EZchip Technologies.
-
-
-*******************************************************************************/
-#include <linux/linkage.h>
-#include <asm/entry.h>
-#include <asm/cache.h>
-#include <plat/ctop.h>
-
-	.cpu A7
-
-	.section .init.text, "ax",@progbits
-	.align 1024	; HW requierment for restart first PC
-
-ENTRY(res_service)
-#if defined(CONFIG_EZNPS_MTM_EXT) && defined(CONFIG_EZNPS_SHARED_AUX_REGS)
-	; There is no work for HW thread id != 0
-	lr	r3, [CTOP_AUX_THREAD_ID]
-	cmp	r3, 0
-	jne	stext
-#endif
-
-#ifdef CONFIG_ARC_HAS_DCACHE
-	; With no cache coherency mechanism D$ need to be used very carefully.
-	; Address space:
-	; 0G-2G: We disable CONFIG_ARC_CACHE_PAGES.
-	; 2G-3G: We disable D$ by setting this bit.
-	; 3G-4G: D$ is disabled by architecture.
-	; FMT are huge pages for user application reside at 0-2G.
-	; Only FMT left as one who can use D$ where each such page got
-	; disable/enable bit for cachability.
-	; Programmer will use FMT pages for private data so cache coherency
-	; would not be a problem.
-	; First thing we invalidate D$
-	sr	1, [ARC_REG_DC_IVDC]
-	sr	HW_COMPLY_KRN_NOT_D_CACHED, [CTOP_AUX_HW_COMPLY]
-#endif
-
-#ifdef CONFIG_SMP
-	; We set logical cpuid to be used by GET_CPUID
-	; We do not use physical cpuid since we want ids to be continious when
-	; it comes to cpus on the same quad cluster.
-	; This is useful for applications that used shared resources of a quad
-	; cluster such SRAMS.
-	lr 	r3, [CTOP_AUX_CORE_ID]
-	sr	r3, [CTOP_AUX_LOGIC_CORE_ID]
-	lr	r3, [CTOP_AUX_CLUSTER_ID]
-	; Set logical is acheived by swap of 2 middle bits of cluster id (4 bit)
-	; r3 is used since we use short instruction and we need q-class reg
-	.short	CTOP_INST_MOV2B_FLIP_R3_B1_B2_INST
-	.word 	CTOP_INST_MOV2B_FLIP_R3_B1_B2_LIMM
-	 sr	r3, [CTOP_AUX_LOGIC_CLUSTER_ID]
-#endif
-
-	j	stext
-END(res_service)
diff --git a/arch/arc/plat-eznps/include/plat/ctop.h b/arch/arc/plat-eznps/include/plat/ctop.h
deleted file mode 100644
index a4a61531c7fb..000000000000
--- a/arch/arc/plat-eznps/include/plat/ctop.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright(c) 2015 EZchip Technologies.
- */
-
-#ifndef _PLAT_EZNPS_CTOP_H
-#define _PLAT_EZNPS_CTOP_H
-
-#ifndef CONFIG_ARC_PLAT_EZNPS
-#error "Incorrect ctop.h include"
-#endif
-
-#include <linux/bits.h>
-#include <linux/types.h>
-#include <soc/nps/common.h>
-
-/* core auxiliary registers */
-#ifdef __ASSEMBLY__
-#define CTOP_AUX_BASE				(-0x800)
-#else
-#define CTOP_AUX_BASE				0xFFFFF800
-#endif
-
-#define CTOP_AUX_GLOBAL_ID			(CTOP_AUX_BASE + 0x000)
-#define CTOP_AUX_CLUSTER_ID			(CTOP_AUX_BASE + 0x004)
-#define CTOP_AUX_CORE_ID			(CTOP_AUX_BASE + 0x008)
-#define CTOP_AUX_THREAD_ID			(CTOP_AUX_BASE + 0x00C)
-#define CTOP_AUX_LOGIC_GLOBAL_ID		(CTOP_AUX_BASE + 0x010)
-#define CTOP_AUX_LOGIC_CLUSTER_ID		(CTOP_AUX_BASE + 0x014)
-#define CTOP_AUX_LOGIC_CORE_ID			(CTOP_AUX_BASE + 0x018)
-#define CTOP_AUX_MT_CTRL			(CTOP_AUX_BASE + 0x020)
-#define CTOP_AUX_HW_COMPLY			(CTOP_AUX_BASE + 0x024)
-#define CTOP_AUX_DPC				(CTOP_AUX_BASE + 0x02C)
-#define CTOP_AUX_LPC				(CTOP_AUX_BASE + 0x030)
-#define CTOP_AUX_EFLAGS				(CTOP_AUX_BASE + 0x080)
-#define CTOP_AUX_IACK				(CTOP_AUX_BASE + 0x088)
-#define CTOP_AUX_GPA1				(CTOP_AUX_BASE + 0x08C)
-#define CTOP_AUX_UDMC				(CTOP_AUX_BASE + 0x300)
-
-/* EZchip core instructions */
-#define CTOP_INST_HWSCHD_WFT_IE12		0x3E6F7344
-#define CTOP_INST_HWSCHD_OFF_R4			0x3C6F00BF
-#define CTOP_INST_HWSCHD_RESTORE_R4		0x3E6F7103
-#define CTOP_INST_SCHD_RW			0x3E6F7004
-#define CTOP_INST_SCHD_RD			0x3E6F7084
-#define CTOP_INST_ASRI_0_R3			0x3B56003E
-#define CTOP_INST_XEX_DI_R2_R2_R3		0x4A664C00
-#define CTOP_INST_EXC_DI_R2_R2_R3		0x4A664C01
-#define CTOP_INST_AADD_DI_R2_R2_R3		0x4A664C02
-#define CTOP_INST_AAND_DI_R2_R2_R3		0x4A664C04
-#define CTOP_INST_AOR_DI_R2_R2_R3		0x4A664C05
-#define CTOP_INST_AXOR_DI_R2_R2_R3		0x4A664C06
-
-/* Do not use D$ for address in 2G-3G */
-#define HW_COMPLY_KRN_NOT_D_CACHED		BIT(28)
-
-#define NPS_MSU_EN_CFG				0x80
-#define NPS_CRG_BLKID				0x480
-#define NPS_CRG_SYNC_BIT			BIT(0)
-#define NPS_GIM_BLKID				0x5C0
-
-/* GIM registers and fields*/
-#define NPS_GIM_UART_LINE			BIT(7)
-#define NPS_GIM_DBG_LAN_EAST_TX_DONE_LINE	BIT(10)
-#define NPS_GIM_DBG_LAN_EAST_RX_RDY_LINE	BIT(11)
-#define NPS_GIM_DBG_LAN_WEST_TX_DONE_LINE	BIT(25)
-#define NPS_GIM_DBG_LAN_WEST_RX_RDY_LINE	BIT(26)
-
-#ifndef __ASSEMBLY__
-/* Functional registers definition */
-struct nps_host_reg_mtm_cfg {
-	union {
-		struct {
-			u32 gen:1, gdis:1, clk_gate_dis:1, asb:1,
-			__reserved:9, nat:3, ten:16;
-		};
-		u32 value;
-	};
-};
-
-struct nps_host_reg_mtm_cpu_cfg {
-	union {
-		struct {
-			u32 csa:22, dmsid:6, __reserved:3, cs:1;
-		};
-		u32 value;
-	};
-};
-
-struct nps_host_reg_thr_init {
-	union {
-		struct {
-			u32 str:1, __reserved:27, thr_id:4;
-		};
-		u32 value;
-	};
-};
-
-struct nps_host_reg_thr_init_sts {
-	union {
-		struct {
-			u32 bsy:1, err:1, __reserved:26, thr_id:4;
-		};
-		u32 value;
-	};
-};
-
-struct nps_host_reg_msu_en_cfg {
-	union {
-		struct {
-			u32     __reserved1:11,
-			rtc_en:1, ipc_en:1, gim_1_en:1,
-			gim_0_en:1, ipi_en:1, buff_e_rls_bmuw:1,
-			buff_e_alc_bmuw:1, buff_i_rls_bmuw:1, buff_i_alc_bmuw:1,
-			buff_e_rls_bmue:1, buff_e_alc_bmue:1, buff_i_rls_bmue:1,
-			buff_i_alc_bmue:1, __reserved2:1, buff_e_pre_en:1,
-			buff_i_pre_en:1, pmuw_ja_en:1, pmue_ja_en:1,
-			pmuw_nj_en:1, pmue_nj_en:1, msu_en:1;
-		};
-		u32 value;
-	};
-};
-
-struct nps_host_reg_gim_p_int_dst {
-	union {
-		struct {
-			u32 int_out_en:1, __reserved1:4,
-			is:1, intm:2, __reserved2:4,
-			nid:4, __reserved3:4, cid:4,
-			 __reserved4:4, tid:4;
-		};
-		u32 value;
-	};
-};
-
-/* AUX registers definition */
-struct nps_host_reg_aux_dpc {
-	union {
-		struct {
-			u32 ien:1, men:1, hen:1, reserved:29;
-		};
-		u32 value;
-	};
-};
-
-struct nps_host_reg_aux_udmc {
-	union {
-		struct {
-			u32 dcp:1, cme:1, __reserved:19, nat:3,
-			__reserved2:5, dcas:3;
-		};
-		u32 value;
-	};
-};
-
-struct nps_host_reg_aux_mt_ctrl {
-	union {
-		struct {
-			u32 mten:1, hsen:1, scd:1, sten:1,
-			st_cnt:8, __reserved:8,
-			hs_cnt:8, __reserved1:4;
-		};
-		u32 value;
-	};
-};
-
-struct nps_host_reg_aux_hw_comply {
-	union {
-		struct {
-			u32 me:1, le:1, te:1, knc:1, __reserved:28;
-		};
-		u32 value;
-	};
-};
-
-struct nps_host_reg_aux_lpc {
-	union {
-		struct {
-			u32 mep:1, __reserved:31;
-		};
-		u32 value;
-	};
-};
-
-/* CRG registers */
-#define REG_GEN_PURP_0          nps_host_reg_non_cl(NPS_CRG_BLKID, 0x1BF)
-
-/* GIM registers */
-#define REG_GIM_P_INT_EN_0      nps_host_reg_non_cl(NPS_GIM_BLKID, 0x100)
-#define REG_GIM_P_INT_POL_0     nps_host_reg_non_cl(NPS_GIM_BLKID, 0x110)
-#define REG_GIM_P_INT_SENS_0    nps_host_reg_non_cl(NPS_GIM_BLKID, 0x114)
-#define REG_GIM_P_INT_BLK_0     nps_host_reg_non_cl(NPS_GIM_BLKID, 0x118)
-#define REG_GIM_P_INT_DST_10    nps_host_reg_non_cl(NPS_GIM_BLKID, 0x13A)
-#define REG_GIM_P_INT_DST_11    nps_host_reg_non_cl(NPS_GIM_BLKID, 0x13B)
-#define REG_GIM_P_INT_DST_25    nps_host_reg_non_cl(NPS_GIM_BLKID, 0x149)
-#define REG_GIM_P_INT_DST_26    nps_host_reg_non_cl(NPS_GIM_BLKID, 0x14A)
-
-#else
-
-.macro  GET_CPU_ID  reg
-	lr  \reg, [CTOP_AUX_LOGIC_GLOBAL_ID]
-#ifndef CONFIG_EZNPS_MTM_EXT
-	lsr \reg, \reg, 4
-#endif
-.endm
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _PLAT_EZNPS_CTOP_H */
diff --git a/arch/arc/plat-eznps/include/plat/mtm.h b/arch/arc/plat-eznps/include/plat/mtm.h
deleted file mode 100644
index 7c55becc891b..000000000000
--- a/arch/arc/plat-eznps/include/plat/mtm.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright(c) 2015 EZchip Technologies.
- */
-
-#ifndef _PLAT_EZNPS_MTM_H
-#define _PLAT_EZNPS_MTM_H
-
-#include <plat/ctop.h>
-
-static inline void *nps_mtm_reg_addr(u32 cpu, u32 reg)
-{
-	struct global_id gid;
-	u32 core, blkid;
-
-	gid.value = cpu;
-	core = gid.core;
-	blkid = (((core & 0x0C) << 2) | (core & 0x03));
-
-	return nps_host_reg(cpu, blkid, reg);
-}
-
-#ifdef CONFIG_EZNPS_MTM_EXT
-#define NPS_CPU_TO_THREAD_NUM(cpu) \
-	({ struct global_id gid; gid.value = cpu; gid.thread; })
-
-/* MTM registers */
-#define MTM_CFG(cpu)			nps_mtm_reg_addr(cpu, 0x81)
-#define MTM_THR_INIT(cpu)		nps_mtm_reg_addr(cpu, 0x92)
-#define MTM_THR_INIT_STS(cpu)		nps_mtm_reg_addr(cpu, 0x93)
-
-#define get_thread(map) map.thread
-#define eznps_max_cpus 4096
-#define eznps_cpus_per_cluster	256
-
-void mtm_enable_core(unsigned int cpu);
-int mtm_enable_thread(int cpu);
-#else /* !CONFIG_EZNPS_MTM_EXT */
-
-#define get_thread(map) 0
-#define eznps_max_cpus 256
-#define eznps_cpus_per_cluster	16
-#define mtm_enable_core(cpu)
-#define mtm_enable_thread(cpu) 1
-#define NPS_CPU_TO_THREAD_NUM(cpu) 0
-
-#endif /* CONFIG_EZNPS_MTM_EXT */
-
-#endif /* _PLAT_EZNPS_MTM_H */
diff --git a/arch/arc/plat-eznps/include/plat/smp.h b/arch/arc/plat-eznps/include/plat/smp.h
deleted file mode 100644
index e433f118bdca..000000000000
--- a/arch/arc/plat-eznps/include/plat/smp.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright(c) 2015 EZchip Technologies.
- */
-
-#ifndef __PLAT_EZNPS_SMP_H
-#define __PLAT_EZNPS_SMP_H
-
-#ifdef CONFIG_SMP
-
-extern void res_service(void);
-
-#endif /* CONFIG_SMP */
-
-#endif
diff --git a/arch/arc/plat-eznps/mtm.c b/arch/arc/plat-eznps/mtm.c
deleted file mode 100644
index 3dcf5a9e2976..000000000000
--- a/arch/arc/plat-eznps/mtm.c
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright(c) 2015 EZchip Technologies.
- */
-
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/log2.h>
-#include <asm/arcregs.h>
-#include <plat/mtm.h>
-#include <plat/smp.h>
-
-#define MT_HS_CNT_MIN		0x01
-#define MT_HS_CNT_MAX		0xFF
-#define MT_CTRL_ST_CNT		0xF
-#define NPS_NUM_HW_THREADS	0x10
-
-static int mtm_hs_ctr = MT_HS_CNT_MAX;
-
-#ifdef CONFIG_EZNPS_MEM_ERROR_ALIGN
-int do_memory_error(unsigned long address, struct pt_regs *regs)
-{
-	die("Invalid Mem Access", regs, address);
-
-	return 1;
-}
-#endif
-
-static void mtm_init_nat(int cpu)
-{
-	struct nps_host_reg_mtm_cfg mtm_cfg;
-	struct nps_host_reg_aux_udmc udmc;
-	int log_nat, nat = 0, i, t;
-
-	/* Iterate core threads and update nat */
-	for (i = 0, t = cpu; i < NPS_NUM_HW_THREADS; i++, t++)
-		nat += test_bit(t, cpumask_bits(cpu_possible_mask));
-
-	log_nat = ilog2(nat);
-
-	udmc.value = read_aux_reg(CTOP_AUX_UDMC);
-	udmc.nat = log_nat;
-	write_aux_reg(CTOP_AUX_UDMC, udmc.value);
-
-	mtm_cfg.value = ioread32be(MTM_CFG(cpu));
-	mtm_cfg.nat = log_nat;
-	iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
-}
-
-static void mtm_init_thread(int cpu)
-{
-	int i, tries = 5;
-	struct nps_host_reg_thr_init thr_init;
-	struct nps_host_reg_thr_init_sts thr_init_sts;
-
-	/* Set thread init register */
-	thr_init.value = 0;
-	iowrite32be(thr_init.value, MTM_THR_INIT(cpu));
-	thr_init.thr_id = NPS_CPU_TO_THREAD_NUM(cpu);
-	thr_init.str = 1;
-	iowrite32be(thr_init.value, MTM_THR_INIT(cpu));
-
-	/* Poll till thread init is done */
-	for (i = 0; i < tries; i++) {
-		thr_init_sts.value = ioread32be(MTM_THR_INIT_STS(cpu));
-		if (thr_init_sts.thr_id == thr_init.thr_id) {
-			if (thr_init_sts.bsy)
-				continue;
-			else if (thr_init_sts.err)
-				pr_warn("Failed to thread init cpu %u\n", cpu);
-			break;
-		}
-
-		pr_warn("Wrong thread id in thread init for cpu %u\n", cpu);
-		break;
-	}
-
-	if (i == tries)
-		pr_warn("Got thread init timeout for cpu %u\n", cpu);
-}
-
-int mtm_enable_thread(int cpu)
-{
-	struct nps_host_reg_mtm_cfg mtm_cfg;
-
-	if (NPS_CPU_TO_THREAD_NUM(cpu) == 0)
-		return 1;
-
-	/* Enable thread in mtm */
-	mtm_cfg.value = ioread32be(MTM_CFG(cpu));
-	mtm_cfg.ten |= (1 << (NPS_CPU_TO_THREAD_NUM(cpu)));
-	iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
-
-	return 0;
-}
-
-void mtm_enable_core(unsigned int cpu)
-{
-	int i;
-	struct nps_host_reg_aux_mt_ctrl mt_ctrl;
-	struct nps_host_reg_mtm_cfg mtm_cfg;
-	struct nps_host_reg_aux_dpc dpc;
-
-	/*
-	 * Initializing dpc register in each CPU.
-	 * Overwriting the init value of the DPC
-	 * register so that CMEM and FMT virtual address
-	 * spaces are accessible, and Data Plane HW
-	 * facilities are enabled.
-	 */
-	dpc.ien = 1;
-	dpc.men = 1;
-	write_aux_reg(CTOP_AUX_DPC, dpc.value);
-
-	if (NPS_CPU_TO_THREAD_NUM(cpu) != 0)
-		return;
-
-	/* Initialize Number of Active Threads */
-	mtm_init_nat(cpu);
-
-	/* Initialize mtm_cfg */
-	mtm_cfg.value = ioread32be(MTM_CFG(cpu));
-	mtm_cfg.ten = 1;
-	iowrite32be(mtm_cfg.value, MTM_CFG(cpu));
-
-	/* Initialize all other threads in core */
-	for (i = 1; i < NPS_NUM_HW_THREADS; i++)
-		mtm_init_thread(cpu + i);
-
-
-	/* Enable HW schedule, stall counter, mtm */
-	mt_ctrl.value = 0;
-	mt_ctrl.hsen = 1;
-	mt_ctrl.hs_cnt = mtm_hs_ctr;
-	mt_ctrl.mten = 1;
-	write_aux_reg(CTOP_AUX_MT_CTRL, mt_ctrl.value);
-
-	/*
-	 * HW scheduling mechanism will start working
-	 * Only after call to instruction "schd.rw".
-	 * cpu_relax() calls "schd.rw" instruction.
-	 */
-	cpu_relax();
-}
-
-/* Verify and set the value of the mtm hs counter */
-static int __init set_mtm_hs_ctr(char *ctr_str)
-{
-	int hs_ctr;
-	int ret;
-
-	ret = kstrtoint(ctr_str, 0, &hs_ctr);
-
-	if (ret || hs_ctr > MT_HS_CNT_MAX || hs_ctr < MT_HS_CNT_MIN) {
-		pr_err("** Invalid @nps_mtm_hs_ctr [%d] needs to be [%d:%d] (incl)\n",
-		       hs_ctr, MT_HS_CNT_MIN, MT_HS_CNT_MAX);
-		return -EINVAL;
-	}
-
-	mtm_hs_ctr = hs_ctr;
-
-	return 0;
-}
-early_param("nps_mtm_hs_ctr", set_mtm_hs_ctr);
diff --git a/arch/arc/plat-eznps/platform.c b/arch/arc/plat-eznps/platform.c
deleted file mode 100644
index 6de2fe840043..000000000000
--- a/arch/arc/plat-eznps/platform.c
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright(c) 2015 EZchip Technologies.
- */
-
-#include <linux/init.h>
-#include <linux/io.h>
-#include <asm/mach_desc.h>
-#include <plat/mtm.h>
-
-static void __init eznps_configure_msu(void)
-{
-	int cpu;
-	struct nps_host_reg_msu_en_cfg msu_en_cfg = {.value = 0};
-
-	msu_en_cfg.msu_en = 1;
-	msu_en_cfg.ipi_en = 1;
-	msu_en_cfg.gim_0_en = 1;
-	msu_en_cfg.gim_1_en = 1;
-
-	/* enable IPI and GIM messages on all clusters */
-	for (cpu = 0 ; cpu < eznps_max_cpus; cpu += eznps_cpus_per_cluster)
-		iowrite32be(msu_en_cfg.value,
-			    nps_host_reg(cpu, NPS_MSU_BLKID, NPS_MSU_EN_CFG));
-}
-
-static void __init eznps_configure_gim(void)
-{
-	u32 reg_value;
-	u32 gim_int_lines;
-	struct nps_host_reg_gim_p_int_dst gim_p_int_dst = {.value = 0};
-
-	gim_int_lines = NPS_GIM_UART_LINE;
-	gim_int_lines |= NPS_GIM_DBG_LAN_EAST_TX_DONE_LINE;
-	gim_int_lines |= NPS_GIM_DBG_LAN_EAST_RX_RDY_LINE;
-	gim_int_lines |= NPS_GIM_DBG_LAN_WEST_TX_DONE_LINE;
-	gim_int_lines |= NPS_GIM_DBG_LAN_WEST_RX_RDY_LINE;
-
-	/*
-	 * IRQ polarity
-	 * low or high level
-	 * negative or positive edge
-	 */
-	reg_value = ioread32be(REG_GIM_P_INT_POL_0);
-	reg_value &= ~gim_int_lines;
-	iowrite32be(reg_value, REG_GIM_P_INT_POL_0);
-
-	/* IRQ type level or edge */
-	reg_value = ioread32be(REG_GIM_P_INT_SENS_0);
-	reg_value |= NPS_GIM_DBG_LAN_EAST_TX_DONE_LINE;
-	reg_value |= NPS_GIM_DBG_LAN_WEST_TX_DONE_LINE;
-	iowrite32be(reg_value, REG_GIM_P_INT_SENS_0);
-
-	/*
-	 * GIM interrupt select type for
-	 * dbg_lan TX and RX interrupts
-	 * should be type 1
-	 * type 0 = IRQ line 6
-	 * type 1 = IRQ line 7
-	 */
-	gim_p_int_dst.is = 1;
-	iowrite32be(gim_p_int_dst.value, REG_GIM_P_INT_DST_10);
-	iowrite32be(gim_p_int_dst.value, REG_GIM_P_INT_DST_11);
-	iowrite32be(gim_p_int_dst.value, REG_GIM_P_INT_DST_25);
-	iowrite32be(gim_p_int_dst.value, REG_GIM_P_INT_DST_26);
-
-	/*
-	 * CTOP IRQ lines should be defined
-	 * as blocking in GIM
-	*/
-	iowrite32be(gim_int_lines, REG_GIM_P_INT_BLK_0);
-
-	/* enable CTOP IRQ lines in GIM */
-	iowrite32be(gim_int_lines, REG_GIM_P_INT_EN_0);
-}
-
-static void __init eznps_early_init(void)
-{
-	eznps_configure_msu();
-	eznps_configure_gim();
-}
-
-static const char *eznps_compat[] __initconst = {
-	"ezchip,arc-nps",
-	NULL,
-};
-
-MACHINE_START(NPS, "nps")
-	.dt_compat	= eznps_compat,
-	.init_early	= eznps_early_init,
-MACHINE_END
diff --git a/arch/arc/plat-eznps/smp.c b/arch/arc/plat-eznps/smp.c
deleted file mode 100644
index f119cb7de2ae..000000000000
--- a/arch/arc/plat-eznps/smp.c
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright(c) 2015 EZchip Technologies.
- */
-
-#include <linux/smp.h>
-#include <linux/of_fdt.h>
-#include <linux/io.h>
-#include <linux/irqdomain.h>
-#include <asm/irq.h>
-#include <plat/ctop.h>
-#include <plat/smp.h>
-#include <plat/mtm.h>
-
-#define NPS_DEFAULT_MSID	0x34
-#define NPS_MTM_CPU_CFG		0x90
-
-static char smp_cpuinfo_buf[128] = {"Extn [EZNPS-SMP]\t: On\n"};
-
-/* Get cpu map from device tree */
-static int __init eznps_get_map(const char *name, struct cpumask *cpumask)
-{
-	unsigned long dt_root = of_get_flat_dt_root();
-	const char *buf;
-
-	buf = of_get_flat_dt_prop(dt_root, name, NULL);
-	if (!buf)
-		return 1;
-
-	cpulist_parse(buf, cpumask);
-
-	return 0;
-}
-
-/* Update board cpu maps */
-static void __init eznps_init_cpumasks(void)
-{
-	struct cpumask cpumask;
-
-	if (eznps_get_map("present-cpus", &cpumask)) {
-		pr_err("Failed to get present-cpus from dtb");
-		return;
-	}
-	init_cpu_present(&cpumask);
-
-	if (eznps_get_map("possible-cpus", &cpumask)) {
-		pr_err("Failed to get possible-cpus from dtb");
-		return;
-	}
-	init_cpu_possible(&cpumask);
-}
-
-static void eznps_init_core(unsigned int cpu)
-{
-	u32 sync_value;
-	struct nps_host_reg_aux_hw_comply hw_comply;
-	struct nps_host_reg_aux_lpc lpc;
-
-	if (NPS_CPU_TO_THREAD_NUM(cpu) != 0)
-		return;
-
-	hw_comply.value = read_aux_reg(CTOP_AUX_HW_COMPLY);
-	hw_comply.me  = 1;
-	hw_comply.le  = 1;
-	hw_comply.te  = 1;
-	write_aux_reg(CTOP_AUX_HW_COMPLY, hw_comply.value);
-
-	/* Enable MMU clock */
-	lpc.mep = 1;
-	write_aux_reg(CTOP_AUX_LPC, lpc.value);
-
-	/* Boot CPU only */
-	if (!cpu) {
-		/* Write to general purpose register in CRG */
-		sync_value = ioread32be(REG_GEN_PURP_0);
-		sync_value |= NPS_CRG_SYNC_BIT;
-		iowrite32be(sync_value, REG_GEN_PURP_0);
-	}
-}
-
-/*
- * Master kick starting another CPU
- */
-static void __init eznps_smp_wakeup_cpu(int cpu, unsigned long pc)
-{
-	struct nps_host_reg_mtm_cpu_cfg cpu_cfg;
-
-	if (mtm_enable_thread(cpu) == 0)
-		return;
-
-	/* set PC, dmsid, and start CPU */
-	cpu_cfg.value = (u32)res_service;
-	cpu_cfg.dmsid = NPS_DEFAULT_MSID;
-	cpu_cfg.cs = 1;
-	iowrite32be(cpu_cfg.value, nps_mtm_reg_addr(cpu, NPS_MTM_CPU_CFG));
-}
-
-static void eznps_ipi_send(int cpu)
-{
-	struct global_id gid;
-	struct {
-		union {
-			struct {
-				u32 num:8, cluster:8, core:8, thread:8;
-			};
-			u32 value;
-		};
-	} ipi;
-
-	gid.value = cpu;
-	ipi.thread = get_thread(gid);
-	ipi.core = gid.core;
-	ipi.cluster = nps_cluster_logic_to_phys(gid.cluster);
-	ipi.num = NPS_IPI_IRQ;
-
-	__asm__ __volatile__(
-	"	mov r3, %0\n"
-	"	.word %1\n"
-	:
-	: "r"(ipi.value), "i"(CTOP_INST_ASRI_0_R3)
-	: "r3");
-}
-
-static void eznps_init_per_cpu(int cpu)
-{
-	smp_ipi_irq_setup(cpu, NPS_IPI_IRQ);
-
-	eznps_init_core(cpu);
-	mtm_enable_core(cpu);
-}
-
-struct plat_smp_ops plat_smp_ops = {
-	.info		= smp_cpuinfo_buf,
-	.init_early_smp	= eznps_init_cpumasks,
-	.cpu_kick	= eznps_smp_wakeup_cpu,
-	.ipi_send	= eznps_ipi_send,
-	.init_per_cpu	= eznps_init_per_cpu,
-};
diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig
index ce8101834518..a2d10c29fbcc 100644
--- a/arch/arc/plat-hsdk/Kconfig
+++ b/arch/arc/plat-hsdk/Kconfig
@@ -7,6 +7,8 @@ menuconfig ARC_SOC_HSDK
 	depends on ISA_ARCV2
 	select ARC_HAS_ACCL_REGS
 	select ARC_IRQ_NO_AUTOSAVE
+	select ARC_FPU_SAVE_RESTORE
 	select CLK_HSDK
+	select RESET_CONTROLLER
 	select RESET_HSDK
 	select HAVE_PCI
diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
index 0b961a2a10b8..c4a875b22352 100644
--- a/arch/arc/plat-hsdk/platform.c
+++ b/arch/arc/plat-hsdk/platform.c
@@ -13,26 +13,10 @@
 #include <asm/io.h>
 #include <asm/mach_desc.h>
 
-int arc_hsdk_axi_dmac_coherent __section(.data) = 0;
+int arc_hsdk_axi_dmac_coherent __section(".data") = 0;
 
 #define ARC_CCM_UNUSED_ADDR	0x60000000
 
-static void __init hsdk_init_per_cpu(unsigned int cpu)
-{
-	/*
-	 * By default ICCM is mapped to 0x7z while this area is used for
-	 * kernel virtual mappings, so move it to currently unused area.
-	 */
-	if (cpuinfo_arc700[cpu].iccm.sz)
-		write_aux_reg(ARC_REG_AUX_ICCM, ARC_CCM_UNUSED_ADDR);
-
-	/*
-	 * By default DCCM is mapped to 0x8z while this area is used by kernel,
-	 * so move it to currently unused area.
-	 */
-	if (cpuinfo_arc700[cpu].dccm.sz)
-		write_aux_reg(ARC_REG_AUX_DCCM, ARC_CCM_UNUSED_ADDR);
-}
 
 #define ARC_PERIPHERAL_BASE	0xf0000000
 #define CREG_BASE		(ARC_PERIPHERAL_BASE + 0x1000)
@@ -68,7 +52,7 @@ static void __init hsdk_enable_gpio_intc_wire(void)
 	 * Current implementation of "irq-dw-apb-ictl" driver doesn't work well
 	 * with stacked INTCs. In particular problem happens if its master INTC
 	 * not yet instantiated. See discussion here -
-	 * https://lkml.org/lkml/2015/3/4/755
+	 * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com
 	 *
 	 * So setup the first gpio block as a passive pass thru and hide it from
 	 * DT hardware topology - connect intc directly to cpu intc
@@ -339,5 +323,4 @@ static const char *hsdk_compat[] __initconst = {
 MACHINE_START(SIMULATION, "hsdk")
 	.dt_compat	= hsdk_compat,
 	.init_early     = hsdk_init_early,
-	.init_per_cpu	= hsdk_init_per_cpu,
 MACHINE_END
diff --git a/arch/arc/plat-sim/platform.c b/arch/arc/plat-sim/platform.c
index 3765dedcd319..2bde2a6e336a 100644
--- a/arch/arc/plat-sim/platform.c
+++ b/arch/arc/plat-sim/platform.c
@@ -21,7 +21,6 @@ static const char *simulation_compat[] __initconst = {
 	"snps,nsim",
 	"snps,nsimosci",
 #else
-	"snps,nsim_hs",
 	"snps,nsimosci_hs",
 	"snps,zebu_hs",
 #endif
diff --git a/arch/arm/Kbuild b/arch/arm/Kbuild
new file mode 100644
index 000000000000..69de6b6243c7
--- /dev/null
+++ b/arch/arm/Kbuild
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_FPE_NWFPE)		+= nwfpe/
+# Put arch/arm/fastfpe/ to use this.
+obj-$(CONFIG_FPE_FASTFPE)	+= $(patsubst $(src)/%,%,$(wildcard $(src)/fastfpe/))
+obj-$(CONFIG_VFP)		+= vfp/
+obj-$(CONFIG_XEN)		+= xen/
+obj-$(CONFIG_VDSO)		+= vdso/
+obj-y				+= kernel/ mm/ common/
+obj-y				+= probes/
+obj-y				+= net/
+obj-y				+= crypto/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8a50efb559f3..45d29320196f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -3,90 +3,115 @@ config ARM
 	bool
 	default y
 	select ARCH_32BIT_OFF_T
-	select ARCH_CLOCKSOURCE_DATA
+	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CACHE_LINE_SIZE if OF
+	select ARCH_HAS_CPU_CACHE_ALIASING
+	select ARCH_HAS_CPU_FINALIZE_INIT if MMU
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
-	select ARCH_HAS_DEVMEM_IS_ALLOWED
-	select ARCH_HAS_DMA_COHERENT_TO_PFN if SWIOTLB
+	select ARCH_HAS_DMA_ALLOC if MMU
+	select ARCH_HAS_DMA_OPS
 	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
-	select ARCH_HAS_PHYS_TO_DMA
 	select ARCH_HAS_SETUP_DMA_OPS
 	select ARCH_HAS_SET_MEMORY
+	select ARCH_STACKWALK
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
 	select ARCH_HAS_STRICT_MODULE_RWX if MMU
-	select ARCH_HAS_SYNC_DMA_FOR_DEVICE if SWIOTLB
-	select ARCH_HAS_SYNC_DMA_FOR_CPU if SWIOTLB
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
-	select ARCH_HAVE_CUSTOM_GPIO_H
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_V7 || CPU_V7M || CPU_V6K
 	select ARCH_HAS_GCOV_PROFILE_ALL
-	select ARCH_KEEP_MEMBLOCK if HAVE_ARCH_PFN_VALID || KEXEC
+	select ARCH_KEEP_MEMBLOCK
+	select ARCH_HAS_UBSAN
 	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN
 	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
+	select ARCH_NEED_CMPXCHG_1_EMU if CPU_V6
 	select ARCH_SUPPORTS_ATOMIC_RMW
+	select ARCH_SUPPORTS_CFI
+	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
+	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_USE_MEMTEST
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
+	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_IPC_PARSE_VERSION
+	select ARCH_WANT_LD_ORPHAN_WARN
 	select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
-	select BUILDTIME_EXTABLE_SORT if MMU
+	select BUILDTIME_TABLE_SORT if MMU
+	select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE)
 	select CLONE_BACKWARDS
 	select CPU_PM if SUSPEND || CPU_IDLE
 	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select DMA_DECLARE_COHERENT
-	select DMA_REMAP if MMU
+	select DMA_GLOBAL_POOL if !MMU
+	select DMA_NONCOHERENT_MMAP if MMU
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
 	select GENERIC_ALLOCATOR
 	select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
 	select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_IRQ_IPI if SMP
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_DEVICES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
+	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
-	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
+	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
-	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU && (!PREEMPT_RT || !SMP)
+	select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
 	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
+	select HAVE_ARCH_KSTACK_ERASE
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
+	select HAVE_ARCH_PFN_VALID
+	select HAVE_ARCH_SECCOMP
 	select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE
 	select HAVE_ARM_SMCCC if CPU_V7
 	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
-	select HAVE_CONTEXT_TRACKING
+	select HAVE_CONTEXT_TRACKING_USER
 	select HAVE_C_RECORDMCOUNT
-	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_BUILDTIME_MCOUNT_SORT
+	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
+	select HAVE_EXTRA_IPI_TRACEPOINTS
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
 	select HAVE_EXIT_THREAD
-	select HAVE_FAST_GUP if ARM_LPAE
-	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
-	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
-	select HAVE_FUNCTION_TRACER if !XIP_KERNEL && (CC_IS_GCC || CLANG_VERSION >= 100000)
+	select HAVE_GUP_FAST if ARM_LPAE
+	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_GRAPH_FREGS
+	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
-	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZ4
@@ -95,31 +120,42 @@ config ARM
 	select HAVE_KERNEL_XZ
 	select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
 	select HAVE_KRETPROBES if HAVE_KPROBES
+	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if (LD_VERSION >= 23600 || LD_IS_LLD) && LD_CAN_USE_KEEP_IN_OVERLAY
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_NMI
-	select HAVE_OPROFILE if HAVE_PERF_EVENTS
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
+	select HAVE_PAGE_SIZE_4KB
+	select HAVE_PCI if MMU
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
-	select HAVE_RCU_TABLE_FREE if SMP && ARM_LPAE
+	select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_RSEQ
+	select HAVE_RUST if CPU_LITTLE_ENDIAN && CPU_32v7
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
+	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
 	select IRQ_FORCED_THREADING
+	select LOCK_MM_AND_FIND_VMA
 	select MODULES_USE_ELF_REL
 	select NEED_DMA_MAP_STATE
 	select OF_EARLY_FLATTREE if OF
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
+	select PCI_DOMAINS_GENERIC if PCI
 	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC
-	select REFCOUNT_FULL
 	select RTC_LIB
+	select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC)
 	select SYS_SUPPORTS_APM_EMULATION
+	select THREAD_INFO_IN_TASK
+	select TIMER_OF if OF
+	select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
+	select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
+	select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	# Above selects are sorted alphabetically; please add new ones
 	# according to that.  Thanks.
 	help
@@ -130,12 +166,16 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
-config ARM_HAS_SG_CHAIN
-	bool
+config ARM_HAS_GROUP_RELOCS
+	def_bool !COMPILE_TEST
+	help
+	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
+	  relocations. The combined range is -/+ 256 MiB, which is usually
+	  sufficient, but not for allyesconfig, so we disable this feature
+	  when doing compile testing.
 
 config ARM_DMA_USE_IOMMU
 	bool
-	select ARM_HAS_SG_CHAIN
 	select NEED_SG_DMA_LENGTH
 
 if ARM_DMA_USE_IOMMU
@@ -183,10 +223,6 @@ config LOCKDEP_SUPPORT
 	bool
 	default y
 
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default !CPU_V7M
-
 config ARCH_HAS_ILOG2_U32
 	bool
 
@@ -210,38 +246,29 @@ config GENERIC_CALIBRATE_DELAY
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 
-config ZONE_DMA
-	bool
-
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
-config ARCH_HAS_DMA_SET_COHERENT_MASK
-	bool
-
 config GENERIC_ISA_DMA
 	bool
 
 config FIQ
 	bool
 
-config NEED_RET_TO_USER
-	bool
-
 config ARCH_MTD_XIP
 	bool
 
 config ARM_PATCH_PHYS_VIRT
-	bool "Patch physical to virtual translations at runtime" if EMBEDDED
+	bool "Patch physical to virtual translations at runtime" if !ARCH_MULTIPLATFORM
 	default y
-	depends on !XIP_KERNEL && MMU
+	depends on MMU
 	help
 	  Patch phys-to-virt and virt-to-phys translation functions at
 	  boot and module load time according to the position of the
 	  kernel in system memory.
 
 	  This can only be used with non-XIP MMU kernels where the base
-	  of physical memory is at a 16MB boundary.
+	  of physical memory is at a 2 MiB boundary.
 
 	  Only disable this option if you know that you do not require
 	  this feature (eg, building a kernel for a single machine) and
@@ -263,15 +290,13 @@ config NEED_MACH_MEMORY_H
 
 config PHYS_OFFSET
 	hex "Physical address of main memory" if MMU
-	depends on !ARM_PATCH_PHYS_VIRT
+	depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR
 	default DRAM_BASE if !MMU
-	default 0x00000000 if ARCH_EBSA110 || \
-			ARCH_FOOTBRIDGE || \
-			ARCH_INTEGRATOR || \
-			ARCH_REALVIEW
+	default 0x00000000 if ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
-	default 0x20000000 if ARCH_S5PV210
-	default 0xc0000000 if ARCH_SA1100
+	default 0xa0000000 if ARCH_PXA
+	default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
+	default 0
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
@@ -294,6 +319,12 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
+config ARM_SINGLE_ARMV7M
+	def_bool !MMU
+	select ARM_NVIC
+	select CPU_V7M
+	select NO_IOPORT_MAP
+
 config ARCH_MMAP_RND_BITS_MIN
 	default 8
 
@@ -302,302 +333,22 @@ config ARCH_MMAP_RND_BITS_MAX
 	default 15 if PAGE_OFFSET=0x80000000
 	default 16
 
-#
-# The "ARM system type" choice list is ordered alphabetically by option
-# text.  Please add new entries in the option alphabetic order.
-#
-choice
-	prompt "ARM system type"
-	default ARM_SINGLE_ARMV7M if !MMU
-	default ARCH_MULTIPLATFORM if MMU
-
 config ARCH_MULTIPLATFORM
-	bool "Allow multiple platforms to be selected"
-	depends on MMU
-	select ARM_HAS_SG_CHAIN
-	select ARM_PATCH_PHYS_VIRT
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_MULTI_HANDLER
-	select HAVE_PCI
-	select PCI_DOMAINS_GENERIC if PCI
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARM_SINGLE_ARMV7M
-	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
-	depends on !MMU
-	select ARM_NVIC
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select CPU_V7M
-	select GENERIC_CLOCKEVENTS
-	select NO_IOPORT_MAP
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARCH_EBSA110
-	bool "EBSA-110"
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_SA110
-	select ISA
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NO_IOPORT_MAP
-	help
-	  This is an evaluation board for the StrongARM processor available
-	  from Digital. It has limited hardware on-board, including an
-	  Ethernet interface, two PCMCIA sockets, two serial ports and a
-	  parallel port.
-
-config ARCH_EP93XX
-	bool "EP93xx-based"
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_AMBA
-	imply ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select AUTO_ZRELADDR
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CPU_ARM920T
-	select GENERIC_CLOCKEVENTS
-	select GPIOLIB
-	help
-	  This enables support for the Cirrus EP93xx series of CPUs.
-
-config ARCH_FOOTBRIDGE
-	bool "FootBridge"
-	select CPU_SA110
-	select FOOTBRIDGE
-	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
-	select NEED_MACH_IO_H if !MMU
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for systems based on the DC21285 companion chip
-	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-
-config ARCH_IOP32X
-	bool "IOP32x-based"
-	depends on MMU
-	select CPU_XSCALE
-	select GPIO_IOP
-	select GPIOLIB
-	select NEED_RET_TO_USER
-	select FORCE_PCI
-	select PLAT_IOP
-	help
-	  Support for Intel's 80219 and IOP32X (XScale) family of
-	  processors.
-
-config ARCH_IXP4XX
-	bool "IXP4xx-based"
-	depends on MMU
-	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_SUPPORTS_BIG_ENDIAN
-	select CPU_XSCALE
-	select DMABOUNCE if PCI
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIO_IXP4XX
-	select GPIOLIB
-	select HAVE_PCI
-	select IXP4XX_IRQ
-	select IXP4XX_TIMER
-	select NEED_MACH_IO_H
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	help
-	  Support for Intel's IXP4XX (XScale) family of processors.
-
-config ARCH_DOVE
-	bool "Marvell Dove"
-	select CPU_PJ4
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select HAVE_PCI
-	select MVEBU_MBUS
-	select PINCTRL
-	select PINCTRL_DOVE
-	select PLAT_ORION_LEGACY
-	select SPARSE_IRQ
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
-config ARCH_PXA
-	bool "PXA2xx/PXA3xx-based"
-	depends on MMU
-	select ARCH_MTD_XIP
-	select ARM_CPU_SUSPEND if PM
-	select AUTO_ZRELADDR
-	select COMMON_CLK
-	select CLKDEV_LOOKUP
-	select CLKSRC_PXA
-	select CLKSRC_MMIO
-	select TIMER_OF
-	select CPU_XSCALE if !CPU_XSC3
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIO_PXA
-	select GPIOLIB
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select PLAT_PXA
-	select SPARSE_IRQ
-	help
-	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-
-config ARCH_RPC
-	bool "RiscPC"
-	depends on MMU
-	select ARCH_ACORN
-	select ARCH_MAY_HAVE_PC_FDC
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_HAS_SG_CHAIN
-	select CPU_SA110
-	select FIQ
-	select HAVE_IDE
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NO_IOPORT_MAP
-	help
-	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
-	  CD-ROM interface, serial and parallel port, and the floppy drive.
-
-config ARCH_SA1100
-	bool "SA1100-based"
-	select ARCH_MTD_XIP
-	select ARCH_SPARSEMEM_ENABLE
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CLKSRC_PXA
-	select TIMER_OF if OF
-	select COMMON_CLK
-	select CPU_FREQ
-	select CPU_SA1100
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select ISA
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for StrongARM 11x0 based boards.
-
-config ARCH_S3C24XX
-	bool "Samsung S3C24XX SoCs"
-	select ATAGS
-	select CLKDEV_LOOKUP
-	select CLKSRC_SAMSUNG_PWM
-	select GENERIC_CLOCKEVENTS
-	select GPIO_SAMSUNG
-	select GPIOLIB
-	select GENERIC_IRQ_MULTI_HANDLER
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_S3C_RTC if RTC_CLASS
-	select NEED_MACH_IO_H
-	select SAMSUNG_ATAGS
-	select USE_OF
-	help
-	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
-	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
-	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
-	  Samsung SMDK2410 development board (and derivatives).
-
-config ARCH_OMAP1
-	bool "TI OMAP1"
-	depends on MMU
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_OMAP
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select GENERIC_IRQ_MULTI_HANDLER
-	select GPIOLIB
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select NEED_MACH_IO_H if PCCARD
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
-
-endchoice
-
-menu "Multiple platform selection"
-	depends on ARCH_MULTIPLATFORM
-
-comment "CPU Core family selection"
-
-config ARCH_MULTI_V4
-	bool "ARMv4 based platforms (FA526)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_FA526
-
-config ARCH_MULTI_V4T
-	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
-		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
-		CPU_ARM925T || CPU_ARM940T)
-
-config ARCH_MULTI_V5
-	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
-	depends on !ARCH_MULTI_V6_V7
-	select ARCH_MULTI_V4_V5
-	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
-		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
-		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
-
-config ARCH_MULTI_V4_V5
-	bool
-
-config ARCH_MULTI_V6
-	bool "ARMv6 based platforms (ARM11)"
-	select ARCH_MULTI_V6_V7
-	select CPU_V6K
-
-config ARCH_MULTI_V7
-	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	bool "Require kernel to be portable to multiple machines" if EXPERT
+	depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	default y
-	select ARCH_MULTI_V6_V7
-	select CPU_V7
-	select HAVE_SMP
-
-config ARCH_MULTI_V6_V7
-	bool
-	select MIGHT_HAVE_CACHE_L2X0
+	help
+	  In general, all Arm machines can be supported in a single
+	  kernel image, covering either Armv4/v5 or Armv6/v7.
 
-config ARCH_MULTI_CPU_AUTO
-	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
-	select ARCH_MULTI_V5
+	  However, some configuration options require hardcoding machine
+	  specific physical addresses or enable errata workarounds that may
+	  break other machines.
 
-endmenu
+	  Selecting N here allows using those options, including
+	  DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y.
 
-config ARCH_VIRT
-	bool "Dummy Virtual Machine"
-	depends on ARCH_MULTI_V7
-	select ARM_AMBA
-	select ARM_GIC
-	select ARM_GIC_V2M if PCI
-	select ARM_GIC_V3
-	select ARM_GIC_V3_ITS if PCI
-	select ARM_PSCI
-	select HAVE_ARM_ARCH_TIMER
-	select ARCH_SUPPORTS_BIG_ENDIAN
+source "arch/arm/Kconfig.platforms"
 
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
@@ -610,8 +361,6 @@ source "arch/arm/mach-alpine/Kconfig"
 
 source "arch/arm/mach-artpec/Kconfig"
 
-source "arch/arm/mach-asm9260/Kconfig"
-
 source "arch/arm/mach-aspeed/Kconfig"
 
 source "arch/arm/mach-at91/Kconfig"
@@ -624,8 +373,6 @@ source "arch/arm/mach-berlin/Kconfig"
 
 source "arch/arm/mach-clps711x/Kconfig"
 
-source "arch/arm/mach-cns3xxx/Kconfig"
-
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-digicolor/Kconfig"
@@ -635,7 +382,6 @@ source "arch/arm/mach-dove/Kconfig"
 source "arch/arm/mach-ep93xx/Kconfig"
 
 source "arch/arm/mach-exynos/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
 
 source "arch/arm/mach-footbridge/Kconfig"
 
@@ -647,10 +393,6 @@ source "arch/arm/mach-hisi/Kconfig"
 
 source "arch/arm/mach-imx/Kconfig"
 
-source "arch/arm/mach-integrator/Kconfig"
-
-source "arch/arm/mach-iop32x/Kconfig"
-
 source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-keystone/Kconfig"
@@ -665,7 +407,7 @@ source "arch/arm/mach-milbeaut/Kconfig"
 
 source "arch/arm/mach-mmp/Kconfig"
 
-source "arch/arm/mach-moxart/Kconfig"
+source "arch/arm/mach-mstar/Kconfig"
 
 source "arch/arm/mach-mv78xx0/Kconfig"
 
@@ -677,36 +419,23 @@ source "arch/arm/mach-nomadik/Kconfig"
 
 source "arch/arm/mach-npcm/Kconfig"
 
-source "arch/arm/mach-nspire/Kconfig"
-
-source "arch/arm/plat-omap/Kconfig"
-
 source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-oxnas/Kconfig"
-
-source "arch/arm/mach-picoxcell/Kconfig"
-
-source "arch/arm/mach-prima2/Kconfig"
-
 source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
 
-source "arch/arm/mach-rda/Kconfig"
+source "arch/arm/mach-realtek/Kconfig"
 
-source "arch/arm/mach-realview/Kconfig"
+source "arch/arm/mach-rpc/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
 
-source "arch/arm/mach-s3c24xx/Kconfig"
-
-source "arch/arm/mach-s3c64xx/Kconfig"
+source "arch/arm/mach-s3c/Kconfig"
 
 source "arch/arm/mach-s5pv210/Kconfig"
 
@@ -724,36 +453,17 @@ source "arch/arm/mach-stm32/Kconfig"
 
 source "arch/arm/mach-sunxi/Kconfig"
 
-source "arch/arm/mach-tango/Kconfig"
-
 source "arch/arm/mach-tegra/Kconfig"
 
-source "arch/arm/mach-u300/Kconfig"
-
-source "arch/arm/mach-uniphier/Kconfig"
-
 source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-vexpress/Kconfig"
-source "arch/arm/plat-versatile/Kconfig"
-
 source "arch/arm/mach-vt8500/Kconfig"
 
-source "arch/arm/mach-zx/Kconfig"
-
 source "arch/arm/mach-zynq/Kconfig"
 
 # ARMv7-M architecture
-config ARCH_EFM32
-	bool "Energy Micro efm32"
-	depends on ARM_SINGLE_ARMV7M
-	select GPIOLIB
-	help
-	  Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
-	  processors.
-
 config ARCH_LPC18XX
 	bool "NXP LPC18xx/LPC43xx"
 	depends on ARM_SINGLE_ARMV7M
@@ -781,14 +491,9 @@ config ARCH_MPS2
 config ARCH_ACORN
 	bool
 
-config PLAT_IOP
-	bool
-	select GENERIC_CLOCKEVENTS
-
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
-	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
@@ -796,9 +501,6 @@ config PLAT_ORION_LEGACY
 	bool
 	select PLAT_ORION
 
-config PLAT_PXA
-	bool
-
 config PLAT_VERSATILE
 	bool
 
@@ -806,8 +508,8 @@ source "arch/arm/mm/Kconfig"
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
-	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
+	default y if PXA27x || PXA3xx || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -876,7 +578,9 @@ config ARM_ERRATA_458693
 	  hazard might then cause a processor deadlock. The workaround enables
 	  the L1 caching of the NEON accesses and disables the PLD instruction
 	  in the ACTLR register. Note that setting specific bits in the ACTLR
-	  register may not be available in non-secure mode.
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_460075
 	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
@@ -889,7 +593,9 @@ config ARM_ERRATA_460075
 	  and overwritten with stale memory contents from external memory. The
 	  workaround disables the write-allocate mode for the L2 cache via the
 	  ACTLR register. Note that setting specific bits in the ACTLR register
-	  may not be available in non-secure mode.
+	  may not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_742230
 	bool "ARM errata: DMB operation may be faulty"
@@ -902,7 +608,10 @@ config ARM_ERRATA_742230
 	  ordering of the two writes. This workaround sets a specific bit in
 	  the diagnostic register of the Cortex-A9 which causes the DMB
 	  instruction to behave as a DSB, ensuring the correct behaviour of
-	  the two writes.
+	  the two writes. Note that setting specific bits in the diagnostics
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_742231
 	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
@@ -917,7 +626,10 @@ config ARM_ERRATA_742231
 	  replaced from one of the CPUs at the same time as another CPU is
 	  accessing it. This workaround sets specific bits in the diagnostic
 	  register of the Cortex-A9 which reduces the linefill issuing
-	  capabilities of the processor.
+	  capabilities of the processor. Note that setting specific bits in the
+	  diagnostics register may not be available in non-secure mode and thus
+	  is not available on a multiplatform kernel. This should be applied by
+	  the bootloader instead.
 
 config ARM_ERRATA_643719
 	bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
@@ -954,7 +666,9 @@ config ARM_ERRATA_743622
 	  register of the Cortex-A9 which disables the Store Buffer
 	  optimisation, preventing the defect from occurring. This has no
 	  visible impact on the overall performance or power consumption of the
-	  processor.
+	  processor. Note that setting specific bits in the diagnostics register
+	  may not be available in non-secure mode and thus is not available on a
+	  multiplatform kernel. This should be applied by the bootloader instead.
 
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
@@ -966,6 +680,10 @@ config ARM_ERRATA_751472
 	  completion of a following broadcasted operation if the second
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
+	  Note that setting specific bits in the diagnostics register may
+	  not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_754322
 	bool "ARM errata: possible faulty MMU translations following an ASID switch"
@@ -1015,12 +733,23 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config ARM_ERRATA_764319
+	bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 764319 Cortex-A9 erratum.
+	  CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an
+	  unexpected Undefined Instruction exception when the DBGSWENABLE
+	  external pin is set to 0, even when the CP14 accesses are performed
+	  from a privileged mode. This work around catches the exception in a
+	  way the kernel does not stop execution.
+
 config ARM_ERRATA_775420
        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
        depends on CPU_V7
        help
 	 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
-	 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+	 r2p6,r2p8,r2p10,r3p0) erratum. In case a data cache maintenance
 	 operation aborts with MMU exception, it might cause the processor
 	 to deadlock. This workaround puts DSB before executing ISB if
 	 an abort may occur on cache maintenance.
@@ -1131,27 +860,10 @@ config ISA
 	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
-# Select ISA DMA controller support
-config ISA_DMA
-	bool
-	select ISA_DMA_API
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool
 
-config PCI_NANOENGINE
-	bool "BSE nanoEngine PCI support"
-	depends on SA1100_NANOENGINE
-	help
-	  Enable PCI on the BSE nanoEngine board.
-
-config PCI_HOST_ITE8152
-	bool
-	depends on PCI && MACH_ARMCORE
-	default y
-	select DMABOUNCE
-
 config ARM_ERRATA_814220
 	bool "ARM errata: Cache maintenance by set/way operations can execute out of order"
 	depends on CPU_V7
@@ -1180,7 +892,6 @@ config HAVE_SMP
 config SMP
 	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
-	depends on GENERIC_CLOCKEVENTS
 	depends on HAVE_SMP
 	depends on MMU || ARM_MPU
 	select IRQ_WORK
@@ -1195,7 +906,7 @@ config SMP
 	  uniprocessor machines. On a uniprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also <file:Documentation/x86/i386/IO-APIC.rst>,
+	  See also <file:Documentation/arch/x86/i386/IO-APIC.rst>,
 	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
@@ -1203,7 +914,7 @@ config SMP
 
 config SMP_ON_UP
 	bool "Allow booting SMP kernel on uniprocessor systems"
-	depends on SMP && !XIP_KERNEL && MMU
+	depends on SMP && MMU
 	default y
 	help
 	  SMP kernels contain instructions which fail on non-SMP processors.
@@ -1213,31 +924,27 @@ config SMP_ON_UP
 
 	  If you don't know what to do here, say Y.
 
+
+config CURRENT_POINTER_IN_TPIDRURO
+	def_bool y
+	depends on CPU_32v6K && !CPU_V6
+
+config IRQSTACKS
+	def_bool y
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+	select HAVE_SOFTIRQ_ON_OWN_STACK
+
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
 	depends on SMP && CPU_V7
+	select ARCH_SUPPORTS_SCHED_MC
+	select ARCH_SUPPORTS_SCHED_SMT
 	default y
 	help
 	  Support ARM cpu topology definition. The MPIDR register defines
 	  affinity between processors which is then used to describe the cpu
 	  topology of an ARM System.
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config HAVE_ARM_SCU
 	bool
 	help
@@ -1247,7 +954,6 @@ config HAVE_ARM_ARCH_TIMER
 	bool "Architected timer support"
 	depends on CPU_V7
 	select ARM_ARCH_TIMER
-	select GENERIC_CLOCKEVENTS
 	help
 	  This option enables support for the ARM architected timer
 
@@ -1327,11 +1033,26 @@ config PAGE_OFFSET
 	default 0xB0000000 if VMSPLIT_3G_OPT
 	default 0xC0000000
 
+config KASAN_SHADOW_OFFSET
+	hex
+	depends on KASAN
+	default 0x1f000000 if PAGE_OFFSET=0x40000000
+	default 0x5f000000 if PAGE_OFFSET=0x80000000
+	default 0x9f000000 if PAGE_OFFSET=0xC0000000
+	default 0x8f000000 if PAGE_OFFSET=0xB0000000
+	default 0xffffffff
+
 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
-	range 2 32
+	range 2 16 if DEBUG_KMAP_LOCAL
+	range 2 32 if !DEBUG_KMAP_LOCAL
 	depends on SMP
 	default "4"
+	help
+	  The maximum number of CPUs that the kernel can support.
+	  Up to 32 CPUs can be supported, or up to 16 if kmap_local()
+	  debugging is enabled, which uses half of the per-CPU fixmap
+	  slots as guard regions.
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
@@ -1352,30 +1073,8 @@ config ARM_PSCI
 	  0022A ("Power State Coordination Interface System Software on
 	  ARM processors").
 
-# The GPIO number here must be sorted by descending number. In case of
-# a multiplatform kernel, we just want the highest value required by the
-# selected platforms.
-config ARCH_NR_GPIO
-	int
-	default 2048 if ARCH_SOCFPGA
-	default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
-		ARCH_ZYNQ
-	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
-		SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
-	default 416 if ARCH_SUNXI
-	default 392 if ARCH_U8500
-	default 352 if ARCH_VT8500
-	default 288 if ARCH_ROCKCHIP
-	default 264 if MACH_H4700
-	default 0
-	help
-	  Maximum number of GPIOs in the system.
-
-	  If unsure, leave the default value.
-
 config HZ_FIXED
 	int
-	default 200 if ARCH_EBSA110
 	default 128 if SOC_AT91RM9200
 	default 0
 
@@ -1427,40 +1126,9 @@ config THUMB2_KERNEL
 
 	  If unsure, say N.
 
-config THUMB2_AVOID_R_ARM_THM_JUMP11
-	bool "Work around buggy Thumb-2 short branch relocations in gas"
-	depends on THUMB2_KERNEL && MODULES
-	default y
-	help
-	  Various binutils versions can resolve Thumb-2 branches to
-	  locally-defined, preemptible global symbols as short-range "b.n"
-	  branch instructions.
-
-	  This is a problem, because there's no guarantee the final
-	  destination of the symbol, or any candidate locations for a
-	  trampoline, are within range of the branch.  For this reason, the
-	  kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
-	  relocation in modules at all, and it makes little sense to add
-	  support.
-
-	  The symptom is that the kernel fails with an "unsupported
-	  relocation" error when loading some modules.
-
-	  Until fixed tools are available, passing
-	  -fno-optimize-sibling-calls to gcc should prevent gcc generating
-	  code which hits this problem, at the cost of a bit of extra runtime
-	  stack usage in some cases.
-
-	  The problem is described in more detail at:
-	      https://bugs.launchpad.net/binutils-linaro/+bug/725126
-
-	  Only Thumb-2 kernels are affected.
-
-	  Unless you are sure your tools don't have this problem, say Y.
-
 config ARM_PATCH_IDIV
 	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
-	depends on CPU_32v7 && !XIP_KERNEL
+	depends on CPU_32v7
 	default y
 	help
 	  The ARM compiler inserts calls to __aeabi_idiv() and
@@ -1514,21 +1182,21 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say N.
 
-config ARCH_HAS_HOLES_MEMORYMODEL
-	bool
-
-config ARCH_SPARSEMEM_ENABLE
-	bool
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool y
 
-config ARCH_SPARSEMEM_DEFAULT
-	def_bool ARCH_SPARSEMEM_ENABLE
+config ARCH_FLATMEM_ENABLE
+	def_bool !(ARCH_RPC || ARCH_SA1100)
 
-config HAVE_ARCH_PFN_VALID
-	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+config ARCH_SPARSEMEM_ENABLE
+	def_bool !ARCH_FOOTBRIDGE
+	select SPARSEMEM_STATIC if SPARSEMEM
 
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
+	select KMAP_LOCAL
+	select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
@@ -1545,7 +1213,7 @@ config HIGHMEM
 
 config HIGHPTE
 	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
-	depends on HIGHMEM
+	depends on HIGHMEM && !PREEMPT_RT
 	default y
 	help
 	  The VM uses one page of physical memory for each page table.
@@ -1554,9 +1222,9 @@ config HIGHPTE
 	  consumed by page tables.  Setting this option will allow
 	  user-space 2nd level page tables to reside in high memory.
 
-config CPU_SW_DOMAIN_PAN
-	bool "Enable use of CPU domains to implement privileged no-access"
-	depends on MMU && !ARM_LPAE
+config ARM_PAN
+	bool "Enable privileged no-access"
+	depends on MMU
 	default y
 	help
 	  Increase kernel security by ensuring that normal kernel accesses
@@ -1565,28 +1233,34 @@ config CPU_SW_DOMAIN_PAN
 	  by ensuring that magic values (such as LIST_POISON) will always
 	  fault when dereferenced.
 
+	  The implementation uses CPU domains when !CONFIG_ARM_LPAE and
+	  disabling of TTBR0 page table walks with CONFIG_ARM_LPAE.
+
+config CPU_SW_DOMAIN_PAN
+	def_bool y
+	depends on ARM_PAN && !ARM_LPAE
+	help
+	  Enable use of CPU domains to implement privileged no-access.
+
 	  CPUs with low-vector mappings use a best-efforts implementation.
 	  Their lower 1MB needs to remain accessible for the vectors, but
 	  the remainder of userspace will become appropriately inaccessible.
 
-config HW_PERF_EVENTS
+config CPU_TTBR0_PAN
 	def_bool y
-	depends on ARM_PMU
-
-config SYS_SUPPORTS_HUGETLBFS
-       def_bool y
-       depends on ARM_LPAE
-
-config HAVE_ARCH_TRANSPARENT_HUGEPAGE
-       def_bool y
-       depends on ARM_LPAE
+	depends on ARM_PAN && ARM_LPAE
+	help
+	  Enable privileged no-access by disabling TTBR0 page table walks when
+	  running in kernel mode.
 
-config ARCH_WANT_GENERAL_HUGETLB
+config HW_PERF_EVENTS
 	def_bool y
+	depends on ARM_PMU
 
 config ARM_MODULE_PLTS
 	bool "Use PLTs to allow module memory to spill over into vmalloc area"
 	depends on MODULES
+	select KASAN_VMALLOC if KASAN
 	default y
 	help
 	  Allocate PLTs when loading modules so that jumps and calls whose
@@ -1601,26 +1275,23 @@ config ARM_MODULE_PLTS
 	  Disabling this is usually safe for small single-platform
 	  configurations. If unsure, say y.
 
-config FORCE_MAX_ZONEORDER
-	int "Maximum zone order"
-	default "12" if SOC_AM33XX
-	default "9" if SA1111 || ARCH_EFM32
-	default "11"
+config ARCH_FORCE_MAX_ORDER
+	int "Order of maximal physically contiguous allocations"
+	default "11" if SOC_AM33XX
+	default "8" if SA1111
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_PAGE_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
 
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  Don't change if unsure.
 
 config ALIGNMENT_TRAP
-	bool
-	depends on CPU_CP15_MMU
-	default y if !ARCH_EBSA110
+	def_bool CPU_CP15_MMU
 	select HAVE_PROC_CPU if PROC_FS
 	help
 	  ARM processors cannot fetch/store information which is not
@@ -1647,20 +1318,6 @@ config UACCESS_WITH_MEMCPY
 	  However, if the CPU data cache is using a write-allocate mode,
 	  this option is unlikely to provide any performance gain.
 
-config SECCOMP
-	bool
-	prompt "Enable seccomp to safely compute untrusted bytecode"
-	---help---
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
 config PARAVIRT
 	bool "Enable paravirtualization code"
 	help
@@ -1697,10 +1354,13 @@ config XEN
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
+config CC_HAVE_STACKPROTECTOR_TLS
+	def_bool $(cc-option,-mtp=cp15 -mstack-protector-guard=tls -mstack-protector-guard-offset=0)
+
 config STACKPROTECTOR_PER_TASK
 	bool "Use a unique stack canary value for each task"
-	depends on GCC_PLUGINS && STACKPROTECTOR && SMP && !XIP_DEFLATED_DATA
-	select GCC_PLUGIN_ARM_SSP_PER_TASK
+	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
+	depends on CC_HAVE_STACKPROTECTOR_TLS
 	default y
 	help
 	  Due to the fact that GCC uses an ordinary symbol reference from
@@ -1723,15 +1383,17 @@ config USE_OF
 	help
 	  Include support for flattened device tree machine descriptions.
 
+config ARCH_WANT_FLAT_DTB_INSTALL
+	def_bool y
+
 config ATAGS
-	bool "Support for the traditional ATAGS boot data passing" if USE_OF
+	bool "Support for the traditional ATAGS boot data passing"
 	default y
 	help
 	  This is the traditional way of passing data to the kernel at boot
 	  time. If you are solely relying on the flattened device tree (or
 	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
-	  to remove ATAGS support from your kernel binary.  If unsure,
-	  leave this to y.
+	  to remove ATAGS support from your kernel binary.
 
 config DEPRECATED_PARAM_STRUCT
 	bool "Provide old way to pass kernel parameters"
@@ -1744,7 +1406,7 @@ config DEPRECATED_PARAM_STRUCT
 # TEXT and BSS so we preserve their values in the config files.
 config ZBOOT_ROM_TEXT
 	hex "Compressed ROM boot loader base address"
-	default "0"
+	default 0x0
 	help
 	  The physical address at which the ROM-able zImage is to be
 	  placed in the target.  Platforms which normally make use of
@@ -1755,7 +1417,7 @@ config ZBOOT_ROM_TEXT
 
 config ZBOOT_ROM_BSS
 	hex "Compressed ROM boot loader BSS address"
-	default "0"
+	default 0x0
 	help
 	  The base address of an area of read/write memory in the target
 	  for the ROM-able zImage which must be available while the
@@ -1807,7 +1469,8 @@ config ARM_ATAG_DTB_COMPAT
 	  from the ATAG list and store it at run time into the appended DTB.
 
 choice
-	prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
+	prompt "Kernel command line type"
+	depends on ARM_ATAG_DTB_COMPAT
 	default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
 
 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
@@ -1829,16 +1492,16 @@ config CMDLINE
 	string "Default kernel command string"
 	default ""
 	help
-	  On some architectures (EBSA110 and CATS), there is currently no way
+	  On some architectures (e.g. CATS), there is currently no way
 	  for the boot loader to pass arguments to the kernel. For these
 	  architectures, you should supply some command-line options at build
 	  time by entering them here. As a minimum, you should specify the
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
 
 choice
-	prompt "Kernel command line type" if CMDLINE != ""
+	prompt "Kernel command line type"
+	depends on CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -1865,6 +1528,7 @@ endchoice
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
 	depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
+	depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -1903,20 +1567,8 @@ config XIP_DEFLATED_DATA
 	  copied, saving some precious ROM space. A possible drawback is a
 	  slightly longer boot delay.
 
-config KEXEC
-	bool "Kexec system call (EXPERIMENTAL)"
-	depends on (!SMP || PM_SLEEP_SMP)
-	depends on !CPU_V7M
-	select KEXEC_CORE
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
-
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.
+config ARCH_SUPPORTS_KEXEC
+	def_bool (!SMP || PM_SLEEP_SMP) && MMU
 
 config ATAGS_PROC
 	bool "Export atags in procfs"
@@ -1926,26 +1578,22 @@ config ATAGS_PROC
 	  Should the atags used to boot the kernel be exported in an "atags"
 	  file in procfs. Useful with kexec.
 
-config CRASH_DUMP
-	bool "Build kdump crash kernel (EXPERIMENTAL)"
-	help
-	  Generate crash dump after being started by kexec. This should
-	  be normally only set in special crash dump kernels which are
-	  loaded in the main kernel with kexec-tools into a specially
-	  reserved region and then later executed after a crash by
-	  kdump/kexec. The crash dump kernel must be compiled to a
-	  memory address not used by the main kernel
+config ARCH_SUPPORTS_CRASH_DUMP
+	def_bool y
 
-	  For more details see Documentation/admin-guide/kdump/kdump.rst
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
 
 config AUTO_ZRELADDR
-	bool "Auto calculation of the decompressed kernel image address"
+	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
+	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	help
 	  ZRELADDR is the physical address where the decompressed kernel
 	  image will be placed. If AUTO_ZRELADDR is selected, the address
-	  will be determined at run-time by masking the current IP with
-	  0xf8000000. This assumes the zImage being placed in the first 128MB
-	  from start of memory.
+	  will be determined at run-time, either by masking the current IP
+	  with 0xf8000000, or, if invalid, from the DTB passed in r2.
+	  This assumes the zImage being placed in the first 128MB from
+	  start of memory.
 
 config EFI_STUB
 	bool
@@ -1956,9 +1604,9 @@ config EFI
 	select UCS2_STRING
 	select EFI_PARAMS_FROM_FDT
 	select EFI_STUB
-	select EFI_ARMSTUB
+	select EFI_GENERIC_STUB
 	select EFI_RUNTIME_WRAPPERS
-	---help---
+	help
 	  This option provides support for runtime services provided
 	  by UEFI firmware (such as non-volatile variables, realtime
 	  clock, and platform reset). A UEFI stub is also provided to
@@ -2000,7 +1648,7 @@ comment "At least one emulation must be selected"
 config FPE_NWFPE
 	bool "NWFPE math emulation"
 	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
-	---help---
+	help
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently
 	  support floating point hardware so you need to say Y here even if
@@ -2024,7 +1672,7 @@ config FPE_NWFPE_XP
 config FPE_FASTFPE
 	bool "FastFPE math emulation (EXPERIMENTAL)"
 	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
-	---help---
+	help
 	  Say Y here to include the FAST floating point emulator in the kernel.
 	  This is an experimental much faster emulator which now also has full
 	  precision for the mantissa.  It does not support any exceptions.
@@ -2042,7 +1690,7 @@ config VFP
 	  Say Y to include VFP support code in the kernel. This is needed
 	  if your hardware includes a VFP unit.
 
-	  Please see <file:Documentation/arm/vfp/release-notes.rst> for
+	  Please see <file:Documentation/arch/arm/vfp/release-notes.rst> for
 	  release notes and additional status information.
 
 	  Say N if your target does not have VFP hardware.
@@ -2086,11 +1734,3 @@ config ARCH_HIBERNATION_POSSIBLE
 	default y if ARCH_SUSPEND_POSSIBLE
 
 endmenu
-
-source "drivers/firmware/Kconfig"
-
-if CRYPTO
-source "arch/arm/crypto/Kconfig"
-endif
-
-source "arch/arm/kvm/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 8bcbd0cd739b..366f162e147d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -9,7 +9,7 @@ config ARM_PTDUMP_DEBUGFS
 	depends on MMU
 	select ARM_PTDUMP_CORE
 	select DEBUG_FS
-	---help---
+	help
 	  Say Y here if you want to show the kernel pagetable layout in a
 	  debugfs file. This information is only useful for kernel developers
 	  who are working in architecture specific areas of the kernel.
@@ -17,11 +17,11 @@ config ARM_PTDUMP_DEBUGFS
 	  kernel.
 	  If in doubt, say "N"
 
-config DEBUG_WX
+config ARM_DEBUG_WX
 	bool "Warn on W+X mappings at boot"
 	depends on MMU
 	select ARM_PTDUMP_CORE
-	---help---
+	help
 		Generate a warning if any W+X mappings are found at boot.
 
 		This is useful for discovering cases where the kernel is leaving
@@ -65,7 +65,7 @@ config UNWINDER_FRAME_POINTER
 
 config UNWINDER_ARM
 	bool "ARM EABI stack unwinder"
-	depends on AEABI && !FUNCTION_GRAPH_TRACER
+	depends on AEABI
 	select ARM_UNWIND
 	help
 	  This option enables stack unwinding support in the kernel
@@ -79,8 +79,16 @@ endchoice
 config ARM_UNWIND
 	bool
 
-config FRAME_POINTER
-	bool
+config BACKTRACE_VERBOSE
+	bool "Verbose backtrace"
+	depends on EXPERT
+	help
+	  When the kernel produces a warning or oops, the kernel prints a
+	  trace of the call chain. This option controls whether we include
+	  the numeric addresses or only include the symbolic information.
+
+	  In most cases, say N here, unless you are intending to debug the
+	  kernel and have access to the kernel binary image.
 
 config DEBUG_USER
 	bool "Verbose user fault messages"
@@ -147,14 +155,14 @@ choice
 		    0x80024000      | 0xf0024000     | UART9
 
 	config DEBUG_AT91_RM9200_DBGU
-		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU"
+		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU"
 		select DEBUG_AT91_UART
-		depends on SOC_AT91RM9200 || SOC_AT91SAM9
+		depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on the DBGU port of:
 		    at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
-		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5
+		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60
 
 	config DEBUG_AT91_SAM9263_DBGU
 		bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
@@ -191,6 +199,34 @@ choice
 		  their output to the USART1 port on SAMV7 based
 		  machines.
 
+	config DEBUG_AT91_SAMA7G5_FLEXCOM3
+		bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA7G5
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the FLEXCOM3 port of SAMA7G5.
+
+	config DEBUG_AT91_LAN966_FLEXCOM
+		bool "Kernel low-level debugging on LAN966 FLEXCOM USART"
+		select DEBUG_AT91_UART
+		depends on SOC_LAN966
+		help
+		Say Y here if you want kernel low-level debugging support
+		on the FLEXCOM port of LAN966.
+
+		DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+		0xe0040200      | 0xfd040200     | FLEXCOM0
+		0xe0044200      | 0xfd044200     | FLEXCOM1
+		0xe0060200      | 0xfd060200     | FLEXCOM2
+		0xe0064200      | 0xfd064200     | FLEXCOM3
+		0xe0070200      | 0xfd070200     | FLEXCOM4
+
+		By default, enabling FLEXCOM3 port. Based on requirement, use
+		DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above
+		table.
+
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
 		depends on ARCH_BCM2835 && ARCH_MULTI_V6
@@ -206,6 +242,10 @@ choice
 		depends on ARCH_BCM_5301X || ARCH_BCM_NSP
 		select DEBUG_UART_8250
 
+	config DEBUG_BCMBCA
+		bool "Kernel low-level debugging on BCMBCA UART0"
+		depends on ARCH_BCMBCA
+
 	config DEBUG_BCM_HR2
 		bool "Kernel low-level debugging on Hurricane 2 UART2"
 		depends on ARCH_BCM_HR2
@@ -232,7 +272,7 @@ choice
 
 	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
-		depends on ARCH_BCM_63XX
+		depends on ARCH_BCMBCA
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -268,14 +308,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
-	config DEBUG_CNS3XXX
-		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
-		depends on ARCH_CNS3XXX
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-                  their output to the CNS3xxx UART0.
-
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
@@ -292,14 +324,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART2 serial port on DaVinci DA8XX devices.
 
-	config DEBUG_DAVINCI_DMx_UART0
-		bool "Kernel low-level debugging on DaVinci DMx using UART0"
-		depends on ARCH_DAVINCI_DMx
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 serial port on DaVinci DMx devices.
-
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE
@@ -400,12 +424,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -607,6 +631,14 @@ choice
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
+	config DEBUG_MSTARV7_PMUART
+		bool "Kernel low-level debugging messages via MSTARV7 PM UART"
+		depends on ARCH_MSTARV7
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for MSTAR ARMv7-based platforms on PM UART.
+
 	config DEBUG_MT6589_UART0
 		bool "Mediatek mt6589 UART0"
 		depends on ARCH_MEDIATEK
@@ -721,30 +753,6 @@ choice
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_UART_8250
 
-	config DEBUG_OMAP7XXUART1
-		bool "Kernel low-level debugging via OMAP730 UART1"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART1.
-
-	config DEBUG_OMAP7XXUART2
-		bool "Kernel low-level debugging via OMAP730 UART2"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART2.
-
-	config DEBUG_OMAP7XXUART3
-		bool "Kernel low-level debugging via OMAP730 UART3"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART3.
-
 	config DEBUG_TI81XXUART1
 		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 		depends on ARCH_OMAP2PLUS
@@ -770,14 +778,6 @@ choice
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_OMAP2PLUS_UART
 
-	config DEBUG_PICOXCELL_UART
-		depends on ARCH_PICOXCELL
-		bool "Use PicoXcell UART for low-level debug"
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on PicoXcell based platforms.
-
 	config DEBUG_PXA_UART1
 		depends on ARCH_PXA
 		bool "Use PXA UART1 for low-level debug"
@@ -976,6 +976,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  via SCIF4 on Renesas RZ/G1E (R8A7745).
 
+	config DEBUG_RCAR_GEN2_SCIFA2
+		bool "Kernel low-level debugging messages via SCIFA2 on R8A7742"
+		depends on ARCH_R8A7742
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIFA2 on Renesas RZ/G1H (R8A7742).
+
 	config DEBUG_RMOBILE_SCIFA0
 		bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
 		depends on ARCH_R8A73A4
@@ -998,9 +1005,8 @@ choice
 		  via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
 
 	config DEBUG_S3C_UART0
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 0 for low-level debug"
@@ -1010,9 +1016,8 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART1
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 1 for low-level debug"
@@ -1022,9 +1027,8 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART2
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 2 for low-level debug"
@@ -1034,7 +1038,7 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART3
-		depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
+		depends on ARCH_EXYNOS || ARCH_S5PV210
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
 		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
@@ -1044,33 +1048,6 @@ choice
 		  their output to UART 3. The port must have been initialised
 		  by the boot-loader before use.
 
-	config DEBUG_S3C2410_UART0
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART1
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART2
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
-
 	config DEBUG_SA1100
 		depends on ARCH_SA1100
 		bool "Use SA1100 UARTs for low-level debug"
@@ -1079,8 +1056,16 @@ choice
 		  on SA-11x0 UART ports. The kernel will check for the first
 		  enabled UART in a sequence 3-1-2.
 
+	config DEBUG_SD5203_UART
+		bool "Hisilicon SD5203 Debug UART"
+		depends on ARCH_SD5203
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SD5203 UART.
+
 	config DEBUG_SOCFPGA_UART0
-		depends on ARCH_SOCFPGA
+		depends on ARCH_INTEL_SOCFPGA
 		bool "Use SOCFPGA UART0 for low-level debug"
 		select DEBUG_UART_8250
 		help
@@ -1088,7 +1073,7 @@ choice
 		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
 
 	config DEBUG_SOCFPGA_ARRIA10_UART1
-		depends on ARCH_SOCFPGA
+		depends on ARCH_INTEL_SOCFPGA
 		bool "Use SOCFPGA Arria10 UART1 for low-level debug"
 		select DEBUG_UART_8250
 		help
@@ -1096,7 +1081,7 @@ choice
 		  on SOCFPGA(Arria 10) based platforms.
 
 	config DEBUG_SOCFPGA_CYCLONE5_UART1
-		depends on ARCH_SOCFPGA
+		depends on ARCH_INTEL_SOCFPGA
 		bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug"
 		select DEBUG_UART_8250
 		help
@@ -1135,32 +1120,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Allwinner A31/A23 based platforms on the R_UART.
 
-	config DEBUG_SIRFPRIMA2_UART1
-		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
-		depends on ARCH_PRIMA2
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFprimaII devices.
-
-	config DEBUG_SIRFATLAS7_UART0
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart0 port on SiRFATLAS7 devices.The uart0
-		  is used on SiRFATLAS7 as a extra debug port.sometimes an extra
-		  debug port can be very useful.
-
-	config DEBUG_SIRFATLAS7_UART1
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFATLAS7 devices.
-
 	config DEBUG_SPEAR3XX
 		bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
 		depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
@@ -1177,10 +1136,9 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on ST SPEAr13xx based platforms.
 
-	config STIH41X_DEBUG_ASC2
+	config DEBUG_STIH41X_ASC2
 		bool "Use StiH415/416 ASC2 UART for low-level debug"
 		depends on ARCH_STI
-		select DEBUG_STI_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STiH415/416 based platforms like b2000, which has
@@ -1188,10 +1146,9 @@ choice
 
 		  If unsure, say N.
 
-	config STIH41X_DEBUG_SBC_ASC1
+	config DEBUG_STIH41X_SBC_ASC1
 		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
 		depends on ARCH_STI
-		select DEBUG_STI_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STiH415/416 based platforms like b2020. which has
@@ -1199,25 +1156,61 @@ choice
 
 		  If unsure, say N.
 
+	config DEBUG_STIH418_SBC_ASC0
+		bool "Use StiH418 SBC ASC0 UART for low-level debug"
+		depends on ARCH_STI
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH418 based platforms which has default UART wired
+		  up to SBC ASC0.
+
+		  If unsure, say N.
+
 	config STM32F4_DEBUG_UART
 		bool "Use STM32F4 UART for low-level debug"
-		depends on ARCH_STM32
+		depends on MACH_STM32F429 || MACH_STM32F469
 		select DEBUG_STM32_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STM32F4 based platforms, which default UART is wired on
-		  USART1.
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
 
 		  If unsure, say N.
 
 	config STM32F7_DEBUG_UART
 		bool "Use STM32F7 UART for low-level debug"
-		depends on ARCH_STM32
+		depends on MACH_STM32F746 || MACH_STM32F769
 		select DEBUG_STM32_UART
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on STM32F7 based platforms, which default UART is wired on
-		  USART1.
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32H7_DEBUG_UART
+		bool "Use STM32H7 UART for low-level debug"
+		depends on MACH_STM32H743
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32H7 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32MP1_DEBUG_UART
+		bool "Use STM32MP1 UART for low-level debug"
+		depends on MACH_STM32MP157
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support on
+		  STM32MP1-based platforms, where the default UART is wired to
+		  UART4, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
 
 		  If unsure, say N.
 
@@ -1273,14 +1266,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Tegra based platforms.
 
-	config DEBUG_U300_UART
-		bool "Kernel low-level debugging messages via U300 UART0"
-		depends on ARCH_U300
-		select DEBUG_UART_PL01X
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart port on U300 devices.
-
 	config DEBUG_UX500_UART
 		depends on ARCH_U8500
 		bool "Use Ux500 UART for low-level debug"
@@ -1346,18 +1331,6 @@ choice
 		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
 		  devices, including VT8500, WM8505, WM8650 and WM8850.
 
-	config DEBUG_ZTE_ZX
-		bool "Use ZTE ZX UART"
-		select DEBUG_UART_PL01X
-		depends on ARCH_ZX
-		help
-		  Say Y here if you are enabling ZTE ZX296702 SOC and need
-		  debug uart support.
-
-		  This option is preferred over the platform specific
-		  options; the platform specific options are deprecated
-		  and will be soon removed.
-
 	config DEBUG_ZYNQ_UART0
 		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
 		depends on ARCH_ZYNQ
@@ -1415,20 +1388,6 @@ choice
 		  options; the platform specific options are deprecated
 		  and will be soon removed.
 
-	config DEBUG_LL_UART_EFM32
-		bool "Kernel low-level debugging via efm32 UART"
-		depends on ARCH_EFM32
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to an UART or USART port on efm32 based
-		  machines. Use the following addresses for DEBUG_UART_PHYS:
-
-		    0x4000c000 | USART0
-		    0x4000c400 | USART1
-		    0x4000c800 | USART2
-		    0x4000e000 | UART0
-		    0x4000e400 | UART1
-
 	config DEBUG_LL_UART_PL01X
 		bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
 		help
@@ -1451,19 +1410,21 @@ config DEBUG_AT91_UART
 config DEBUG_EXYNOS_UART
 	bool
 
-config DEBUG_S3C2410_UART
-	bool
-	select DEBUG_S3C24XX_UART
-
-config DEBUG_S3C24XX_UART
-	bool
-
 config DEBUG_S3C64XX_UART
 	bool
 
 config DEBUG_S5PV210_UART
 	bool
 
+config DEBUG_S3C_UART
+	depends on DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
+		   DEBUG_EXYNOS_UART
+	int
+	default "0" if DEBUG_S3C_UART0
+	default "1" if DEBUG_S3C_UART1
+	default "2" if DEBUG_S3C_UART2
+	default "3" if DEBUG_S3C_UART3
+
 config DEBUG_OMAP2PLUS_UART
 	bool
 	depends on ARCH_OMAP2PLUS
@@ -1472,7 +1433,7 @@ config DEBUG_IMX_UART_PORT
 	int "i.MX Debug UART Port Selection"
 	depends on DEBUG_IMX1_UART || \
 		   DEBUG_IMX25_UART || \
-		   DEBUG_IMX21_IMX27_UART || \
+		   DEBUG_IMX27_UART || \
 		   DEBUG_IMX31_UART || \
 		   DEBUG_IMX35_UART || \
 		   DEBUG_IMX50_UART || \
@@ -1501,17 +1462,20 @@ config DEBUG_TEGRA_UART
 	bool
 	depends on ARCH_TEGRA
 
-config DEBUG_STI_UART
-	bool
-	depends on ARCH_STI
-
 config DEBUG_STM32_UART
 	bool
 	depends on ARCH_STM32
 
-config DEBUG_SIRFSOC_UART
-	bool
-	depends on ARCH_SIRF
+config DEBUG_UART_FLOW_CONTROL
+	bool "Enable flow control (CTS) for the debug UART"
+	depends on DEBUG_LL
+	default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
+	help
+	  Some UART ports are connected to terminals that will use modem
+	  control signals to indicate whether they are ready to receive text.
+	  In practice this means that the terminal is asserting the special
+	  control signal CTS (Clear To Send). If your debug UART supports
+	  this and your debug terminal will require it, enable this option.
 
 config DEBUG_LL_INCLUDE
 	string
@@ -1525,16 +1489,15 @@ config DEBUG_LL_INCLUDE
 	default "debug/meson.S" if DEBUG_MESON_UARTAO
 	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
-	default "debug/efm32.S" if DEBUG_LL_UART_EFM32
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
@@ -1551,13 +1514,15 @@ config DEBUG_LL_INCLUDE
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIFA2
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
-	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
-	default "debug/sirf.S" if DEBUG_SIRFSOC_UART
-	default "debug/sti.S" if DEBUG_STI_UART
+	default "debug/sti.S" if DEBUG_STIH41X_ASC2
+	default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
+	default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0
 	default "debug/stm32.S" if DEBUG_STM32_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
@@ -1565,7 +1530,7 @@ config DEBUG_LL_INCLUDE
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART || DEBUG_BCMBCA
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
 	default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
 	default "mach/debug-macro.S"
@@ -1576,11 +1541,10 @@ config DEBUG_UART_PL01X
 
 # Compatibility options for 8250
 config DEBUG_UART_8250
-	def_bool ARCH_EBSA110 || ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC
+	def_bool ARCH_IXP4XX || ARCH_RPC
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
-	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0x01c28000 if DEBUG_SUNXI_UART0
 	default 0x01c28400 if DEBUG_SUNXI_UART1
 	default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
@@ -1590,7 +1554,7 @@ config DEBUG_UART_PHYS
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
 	default 0x07000000 if DEBUG_SUN9I_UART0
-	default 0x09405000 if DEBUG_ZTE_ZX
+	default 0x09530000 if DEBUG_STIH418_SBC_ASC0
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@@ -1605,12 +1569,12 @@ config DEBUG_UART_PHYS
 	default 0x11006000 if DEBUG_MT6589_UART0
 	default 0x11009000 if DEBUG_MT8135_UART3
 	default 0x16000000 if DEBUG_INTEGRATOR
+	default 0x1600d000 if DEBUG_SD5203_UART
 	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x18000400 if DEBUG_BCM_HR2
-	default 0x18010000 if DEBUG_SIRFATLAS7_UART0
-	default 0x18020000 if DEBUG_SIRFATLAS7_UART1
 	default 0x18023000 if DEBUG_BCM_IPROC_UART3
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0x1f221000 if DEBUG_MSTARV7_PMUART
 	default 0x20001000 if DEBUG_HIP01_UART
 	default 0x20060000 if DEBUG_RK29_UART0
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
@@ -1618,7 +1582,9 @@ config DEBUG_UART_PHYS
 	default 0x20201000 if DEBUG_BCM2835
 	default 0x3e000000 if DEBUG_BCM_KONA_UART
 	default 0x3f201000 if DEBUG_BCM2836
-	default 0x4000e400 if DEBUG_LL_UART_EFM32
+	default 0x40010000 if STM32MP1_DEBUG_UART
+	default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
+				STM32H7_DEBUG_UART
 	default 0x40028000 if DEBUG_AT91_SAMV7_USART1
 	default 0x40081000 if DEBUG_LPC18XX_UART0
 	default 0x40090000 if DEBUG_LPC32XX
@@ -1628,20 +1594,11 @@ config DEBUG_UART_PHYS
 	default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
 	default 0x48022000 if DEBUG_TI81XXUART2
 	default 0x48024000 if DEBUG_TI81XXUART3
-	default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
-				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
-	default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
-				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0x4806a000 if DEBUG_OMAP2UART1
+	default 0x4806c000 if DEBUG_OMAP2UART2
 	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0x49020000 if DEBUG_OMAP3UART3
 	default 0x49042000 if DEBUG_OMAP3UART4
-	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
-	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
-	default 0x78000000 if DEBUG_CNS3XXX
 	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
 	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
@@ -1650,12 +1607,9 @@ config DEBUG_UART_PHYS
 	default 0x80010000 if DEBUG_ASM9260_UART
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
-	default 0x80230000 if DEBUG_PICOXCELL_UART
 	default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
-	default 0xc0013000 if DEBUG_U300_UART
 	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xd0000000 if DEBUG_SPEAR3XX
@@ -1664,9 +1618,12 @@ config DEBUG_UART_PHYS
 	default 0xd4017000 if DEBUG_MMP_UART2
 	default 0xd4018000 if DEBUG_MMP_UART3
 	default 0xe0000000 if DEBUG_SPEAR13XX
+	default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM
+	default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
 	default 0xe4007000 if DEBUG_HIP04_UART
 	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
 	default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
+	default 0xe6c60000 if DEBUG_RCAR_GEN2_SCIFA2
 	default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
 	default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
 	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
@@ -1675,7 +1632,6 @@ config DEBUG_UART_PHYS
 	default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
 	default 0xe8009000 if DEBUG_R7S9210_SCIF4
 	default 0xf0000000 if DEBUG_DIGICOLOR_UA0
-	default 0xf0000be0 if ARCH_EBSA110
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
@@ -1685,35 +1641,39 @@ config DEBUG_UART_PHYS
 	default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
-	default 0xfe800000 if ARCH_IOP32X
+	default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
+	default 0xfed32000 if DEBUG_STIH41X_ASC2
 	default 0xff690000 if DEBUG_RK32_UART2
+	default 0xff800640 if DEBUG_BCMBCA
 	default 0xffc02000 if DEBUG_SOCFPGA_UART0
 	default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
 	default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
-	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xfffb0000 if DEBUG_OMAP1UART1
+	default 0xfffb0800 if DEBUG_OMAP1UART2
+	default 0xfffb9800 if DEBUG_OMAP1UART3
 	default 0xfffe8600 if DEBUG_BCM63XX_UART
 	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
 	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
 	depends on ARCH_EP93XX || \
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
-		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
 		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
 		DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \
 		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
 		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
 		DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
+		DEBUG_RCAR_GEN2_SCIFA2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
-		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
+		DEBUG_RMOBILE_SCIFA4 || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
-		DEBUG_AT91_UART
+		DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \
+		DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART || DEBUG_STM32_UART || \
+		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
@@ -1721,11 +1681,12 @@ config DEBUG_UART_VIRT
 	default 0xc8821000 if DEBUG_RV1108_UART1
 	default 0xc8912000 if DEBUG_RV1108_UART0
 	default 0xe0010fe0 if ARCH_RPC
-	default 0xf0000be0 if ARCH_EBSA110
+	default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
 	default 0xf0010000 if DEBUG_ASM9260_UART
 	default 0xf0100000 if DEBUG_DIGICOLOR_UA0
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
+	default 0xf0221000 if DEBUG_MSTARV7_PMUART
 	default 0xf1000300 if DEBUG_BCM_5301X
 	default 0xf1000400 if DEBUG_BCM_HR2
 	default 0xf1002000 if DEBUG_MT8127_UART0
@@ -1743,15 +1704,9 @@ config DEBUG_UART_VIRT
 	default 0xf6200000 if DEBUG_PXA_UART1
 	default 0xf7000000 if DEBUG_SUN9I_UART0
 	default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
-	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
 	default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
 	default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
 	default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
-	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
 	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8007000 if DEBUG_HIP04_UART
@@ -1759,32 +1714,32 @@ config DEBUG_UART_VIRT
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
 	default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
 	default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
+	default 0xf9530000 if DEBUG_STIH418_SBC_ASC0
 	default 0xf9e09000 if DEBUG_AM33XXUART1
 	default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
 	default 0xfa022000 if DEBUG_TI81XXUART2
 	default 0xfa024000 if DEBUG_TI81XXUART3
-	default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
-				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
-	default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
-				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0xfa06a000 if DEBUG_OMAP2UART1
+	default 0xfa06c000 if DEBUG_OMAP2UART2
 	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
-	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
 	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfb020000 if DEBUG_OMAP3UART3
 	default 0xfb042000 if DEBUG_OMAP3UART4
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
-	default 0xfc705000 if DEBUG_ZTE_ZX
 	default 0xfcfe8600 if DEBUG_BCM63XX_UART
 	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+	default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM
+	default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
 	default 0xfd883000 if DEBUG_ALPINE_UART0
+	default 0xfdd32000 if DEBUG_STIH41X_ASC2
+	default 0xfe010000 if STM32MP1_DEBUG_UART
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
-	default 0xfe230000 if DEBUG_PICOXCELL_UART
 	default 0xfe300000 if DEBUG_BCM_KONA_UART
-	default 0xfe800000 if ARCH_IOP32X
+	default 0xfe300640 if DEBUG_BCMBCA
 	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
 	default 0xfeb24000 if DEBUG_RK3X_UART0
 	default 0xfeb26000 if DEBUG_RK3X_UART1
@@ -1795,55 +1750,51 @@ config DEBUG_UART_VIRT
 	default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
-	default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
-	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
-	default 0xfec20000 if DEBUG_SIRFATLAS7_UART1
-	default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xfec90000 if DEBUG_RK32_UART2
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
-	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
+	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
 	default 0xfed60000 if DEBUG_RK29_UART0
 	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0xfedc0000 if DEBUG_EP93XX
 	default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
-	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
-	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xff003000 if DEBUG_U300_UART
+	default 0xff0b0000 if DEBUG_OMAP1UART1
+	default 0xff0b0800 if DEBUG_OMAP1UART2
+	default 0xff0b9800 if DEBUG_OMAP1UART3
 	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
+		DEBUG_QCOM_UARTDM || \
 		DEBUG_S3C64XX_UART || \
-		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
-		DEBUG_AT91_UART
+		DEBUG_BCM63XX_UART || DEBUG_BCMBCA || DEBUG_ASM9260_UART || \
+		DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART || DEBUG_STM32_UART || \
+		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \
-		DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \
-		DEBUG_OMAP7XXUART3
+	default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
+		DEBUG_BCM_HR2
+	default 3 if DEBUG_MSTARV7_PMUART
 	default 2
 
 config DEBUG_UART_8250_WORD
 	bool "Use 32-bit accesses for 8250 UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	depends on DEBUG_UART_8250_SHIFT >= 2
-	default y if DEBUG_PICOXCELL_UART || \
-		DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
+	default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
 		DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
 		DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
-		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \
-		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
+		DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \
+		DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \
+		DEBUG_RK32_UART2
 
 config DEBUG_UART_8250_PALMCHIP
 	bool "8250 UART is Palmchip BK-310x"
@@ -1853,33 +1804,21 @@ config DEBUG_UART_8250_PALMCHIP
 	  except for having a different register layout.  Say Y here if
 	  the debug UART is of this type.
 
-config DEBUG_UART_8250_FLOW_CONTROL
-	bool "Enable flow control for 8250 UART"
-	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
-
 config DEBUG_UNCOMPRESS
 	bool "Enable decompressor debugging via DEBUG_LL output"
-	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
+	depends on !ARCH_MULTIPLATFORM
+	depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
-		     !DEBUG_BRCMSTB_UART
+		     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
 	help
-	  This option influences the normal decompressor output for
-	  multiplatform kernels.  Normally, multiplatform kernels disable
-	  decompressor output because it is not possible to know where to
-	  send the decompressor output.
-
-	  When this option is set, the selected DEBUG_LL output method
-	  will be re-used for normal decompressor output on multiplatform
-	  kernels.
-	  
+	  Say Y here to enable debug output in the decompressor code, using
+	  the selected DEBUG_LL output method.
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
-	default "mach/uncompress.h"
+	default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100
+	default "debug/uncompress.h"
 
 config EARLY_PRINTK
 	bool "Early printk"
diff --git a/arch/arm/Kconfig.platforms b/arch/arm/Kconfig.platforms
new file mode 100644
index 000000000000..5c19c1f2cff6
--- /dev/null
+++ b/arch/arm/Kconfig.platforms
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menu "Platform selection"
+	depends on MMU
+
+comment "CPU Core family selection"
+
+config ARCH_MULTI_V4
+	bool "ARMv4 based platforms (FA526, StrongARM)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
+
+config ARCH_MULTI_V4T
+	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
+		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
+		CPU_ARM925T || CPU_ARM940T)
+
+config ARCH_MULTI_V5
+	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
+	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
+	select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
+		CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
+		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
+
+config ARCH_MULTI_V4_V5
+	bool
+
+config ARCH_MULTI_V6
+	bool "ARMv6 based platforms (ARM11)"
+	select ARCH_MULTI_V6_V7
+	select CPU_V6K
+
+config ARCH_MULTI_V7
+	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
+	default y
+	select ARCH_MULTI_V6_V7
+	select CPU_V7
+	select HAVE_SMP
+
+config ARCH_MULTI_V6_V7
+	bool
+	select MIGHT_HAVE_CACHE_L2X0
+
+config ARCH_MULTI_CPU_AUTO
+	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
+	select ARCH_MULTI_V5
+
+endmenu
+
+config ARCH_VIRT
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
+	select ARM_GIC_V3_ITS if PCI
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for Airoha EN7523 SoCs
+
+config MACH_ASM9260
+	bool "Alphascale ASM9260"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select ASM9260_TIMER
+	help
+	  Support for Alphascale ASM9260 based platform.
+
+menuconfig ARCH_HPE
+	bool "HPE SoC support"
+	depends on ARCH_MULTI_V7
+	help
+	  This enables support for HPE ARM based BMC chips.
+
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+	bool "HPE GXP SoC"
+	depends on ARCH_MULTI_V7
+	select ARM_VIC
+	select GENERIC_IRQ_CHIP
+	select CLKSRC_MMIO
+	help
+	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
+	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
+	  A9 core. It is capable of using an AXI bus to which a memory controller
+	  is attached. It has multiple SPI interfaces to connect boot flash and
+	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
+	  has multiple i2c engines to drive connectivity with a host
+	  infrastructure.
+
+endif
+
+menuconfig ARCH_MOXART
+	bool "MOXA ART SoC"
+	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_FA526
+	select ARM_DMA_MEM_BUFFERABLE
+	select FARADAY_FTINTC010
+	select FTTMR010_TIMER
+	select GPIOLIB
+	select PHYLIB if NETDEVICES
+	help
+	  Say Y here if you want to run your kernel on hardware with a
+	  MOXA ART SoC.
+	  The MOXA ART SoC is based on a Faraday FA526 ARMv4 32-bit
+	  192 MHz CPU with MMU and 16KB/8KB D/I-cache (UC-7112-LX).
+	  Used on models UC-7101, UC-7112/UC-7110, IA240/IA241, IA3341.
+
+if ARCH_MOXART
+
+config MACH_UC7112LX
+	bool "MOXA UC-7112-LX"
+	depends on ARCH_MOXART
+	help
+	  Say Y here if you intend to run this kernel on a MOXA
+	  UC-7112-LX embedded computer.
+
+endif
+
+config ARCH_NSPIRE
+	bool "TI-NSPIRE based"
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_ARM926T
+	select GENERIC_IRQ_CHIP
+	select ARM_AMBA
+	select ARM_VIC
+	select ARM_TIMER_SP804
+	select NSPIRE_TIMER
+	select POWER_RESET
+	select POWER_RESET_SYSCON
+	help
+	  This enables support for systems using the TI-NSPIRE CPU
+
+config ARCH_RDA
+	bool "RDA Micro SoCs"
+	depends on ARCH_MULTI_V7
+	select RDA_INTC
+	select RDA_TIMER
+	help
+	  This enables support for the RDA Micro 8810PL SoC family.
+
+menuconfig ARCH_SUNPLUS
+	bool "Sunplus SoCs"
+	depends on ARCH_MULTI_V7
+	help
+	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+	  such as the Banana Pi BPI-F2S development board (and derivatives).
+	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+	  (<https://tibbo.com/store/plus1.html>)
+
+if ARCH_SUNPLUS
+
+config SOC_SP7021
+	bool "Sunplus SP7021 SoC support"
+	default ARCH_SUNPLUS
+	select HAVE_ARM_ARCH_TIMER
+	select ARM_GIC
+	select ARM_PSCI
+	select PINCTRL
+	select PINCTRL_SPPCTL
+	select SERIAL_SUNPLUS if TTY
+	select SERIAL_SUNPLUS_CONSOLE if TTY
+	help
+	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
+	  It is designed for industrial control.
+
+endif
+
+config ARCH_UNIPHIER
+	bool "Socionext UniPhier SoCs"
+	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
+	select ARM_AMBA
+	select ARM_GLOBAL_TIMER
+	select ARM_GIC
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select PINCTRL
+	select RESET_CONTROLLER
+	help
+	  Support for UniPhier SoC family developed by Socionext Inc.
+	  (formerly, System LSI Business Division of Panasonic Corporation)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index db857d07114f..b7de4b6b284c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -10,22 +10,21 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-LDFLAGS_vmlinux	:= --no-undefined -X --pic-veneer
+LDFLAGS_vmlinux	:= --no-undefined -X --pic-veneer -z norelro
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
 KBUILD_LDFLAGS_MODULE	+= --be8
 endif
 
-ifeq ($(CONFIG_ARM_MODULE_PLTS),y)
-KBUILD_LDS_MODULE	+= $(srctree)/arch/arm/kernel/module.lds
-endif
-
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
 
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
 
+# Disable FDPIC ABI
+KBUILD_CFLAGS	+= $(call cc-option,-mno-fdpic)
+
 # This should work on most of the modern platforms
 KBUILD_DEFCONFIG := multi_v7_defconfig
 
@@ -45,12 +44,10 @@ endif
 ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
 KBUILD_CPPFLAGS	+= -mbig-endian
 CHECKFLAGS	+= -D__ARMEB__
-AS		+= -EB
 KBUILD_LDFLAGS	+= -EB
 else
 KBUILD_CPPFLAGS	+= -mlittle-endian
 CHECKFLAGS	+= -D__ARMEL__
-AS		+= -EL
 KBUILD_LDFLAGS	+= -EL
 endif
 
@@ -63,47 +60,54 @@ endif
 KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 
 # This selects which instruction set is used.
+arch-$(CONFIG_CPU_32v7M)	:=-march=armv7-m
+arch-$(CONFIG_CPU_32v7)		:=-march=armv7-a
+arch-$(CONFIG_CPU_32v6)		:=-march=armv6
+# Only override the compiler option if ARMv6. The ARMv6K extensions are
+# always available in ARMv7
+ifeq ($(CONFIG_CPU_32v6),y)
+arch-$(CONFIG_CPU_32v6K)	:=-march=armv6k
+endif
+arch-$(CONFIG_CPU_32v5)		:=-march=armv5te
+arch-$(CONFIG_CPU_32v4T)	:=-march=armv4t
+arch-$(CONFIG_CPU_32v4)		:=-march=armv4
+arch-$(CONFIG_CPU_32v3)		:=-march=armv3m
+
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+cpp-$(CONFIG_CPU_32v7M)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+cpp-$(CONFIG_CPU_32v6K)		:=-D__LINUX_ARM_ARCH__=6
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
-arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
-arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
-arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3m
-
-# Evaluate arch cc-option calls now
-arch-y := $(arch-y)
+cpp-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5
+cpp-$(CONFIG_CPU_32v4T)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3
 
 # This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM7TDMI)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
-tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
-tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-
-# Evaluate tune cc-option calls now
-tune-y := $(tune-y)
+tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM946E)	:=-mtune=arm9e
+tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
+tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
+tune-$(CONFIG_CPU_XSCALE)	:=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		:=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	:=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		:=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		:=-mtune=arm1136j-s
 
 ifeq ($(CONFIG_AEABI),y)
 CFLAGS_ABI	:=-mabi=aapcs-linux -mfpu=vfp
@@ -119,41 +123,50 @@ ifeq ($(CONFIG_CC_IS_CLANG),y)
 CFLAGS_ABI	+= -meabi gnu
 endif
 
+ifeq ($(CONFIG_CURRENT_POINTER_IN_TPIDRURO),y)
+KBUILD_CFLAGS	+= -mtp=cp15
+endif
+
 # Accept old syntax despite ".syntax unified"
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 
+# The GCC option -ffreestanding is required in order to compile code containing
+# ARM/NEON intrinsics in a non C99-compliant environment (such as the kernel)
+CC_FLAGS_FPU	:= -ffreestanding
+# Enable <arm_neon.h>
+CC_FLAGS_FPU	+= -isystem $(shell $(CC) -print-file-name=include)
+CC_FLAGS_FPU	+= -march=armv7-a -mfloat-abi=softfp -mfpu=neon
+
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
-CFLAGS_ISA	:=-mthumb -Wa,-mimplicit-it=always $(AFLAGS_NOWARN)
+CFLAGS_ISA	:=-Wa,-mimplicit-it=always $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA) -Wa$(comma)-mthumb
-# Work around buggy relocation from gas if requested:
-ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
-KBUILD_CFLAGS_MODULE	+=-fno-optimize-sibling-calls
-endif
+CFLAGS_ISA	+=-mthumb
 else
 CFLAGS_ISA	:=$(call cc-option,-marm,) $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 
 # Need -Uarm for gcc < 3.x
+KBUILD_CPPFLAGS	+=$(cpp-y)
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include $(srctree)/arch/arm/include/asm/unified.h -msoft-float
+KBUILD_RUSTFLAGS += --target=arm-unknown-linux-gnueabi
 
 CHECKFLAGS	+= -D__arm__
 
-#Default value
-head-y		:= arch/arm/kernel/head$(MMUEXT).o
-
 # Text offset. This list is sorted numerically by address in order to
 # provide a means to avoid/resolve conflicts in multi-arch kernels.
+# Note: the 32kB below this value is reserved for use by the kernel
+# during boot, and this offset is critical to the functioning of
+# kexec-tools.
 textofs-y	:= 0x00008000
-# We don't want the htc bootloader to corrupt kernel during resume
-textofs-$(CONFIG_PM_H1940)      := 0x00108000
+# RTD1195 has Boot ROM at start of address space
+textofs-$(CONFIG_ARCH_REALTEK)  := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
 endif
-textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
-textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_QCOM_RESERVE_SMEM) := 0x00208000
 textofs-$(CONFIG_ARCH_MESON) := 0x00208000
 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 
@@ -168,131 +181,70 @@ machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
-machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
-machine-$(CONFIG_ARCH_EFM32)		+= efm32
-machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
 machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
-machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
-machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
-machine-$(CONFIG_ARCH_MPS2)		+= vexpress
-machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
 machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
 machine-$(CONFIG_ARCH_MILBEAUT)		+= milbeaut
 machine-$(CONFIG_ARCH_MXS)		+= mxs
+machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NPCM)		+= npcm
-machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
-machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
-machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_QCOM)		+= qcom
-machine-$(CONFIG_ARCH_RDA)		+= rda
-machine-$(CONFIG_ARCH_REALVIEW)		+= realview
+machine-$(CONFIG_ARCH_REALTEK)		+= realtek
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx
-machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
+machine-$(CONFIG_PLAT_SAMSUNG)		+= s3c
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
 machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
-machine-$(CONFIG_ARCH_SIRF)		+= prima2
-machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
+machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
-machine-$(CONFIG_ARCH_TANGO)		+= tango
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
-machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
-machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
-machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
-machine-$(CONFIG_ARCH_ZX)		+= zx
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
+machine-$(CONFIG_PLAT_VERSATILE)	+= versatile
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
-# Platform directory name.  This list is sorted alphanumerically
-# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_EXYNOS)	+= samsung
-plat-$(CONFIG_ARCH_OMAP)	+= omap
-plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
-plat-$(CONFIG_ARCH_S5PV210)	+= samsung
-plat-$(CONFIG_PLAT_ORION)	+= orion
-plat-$(CONFIG_PLAT_PXA)		+= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	+= samsung
-plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
-
-ifeq ($(CONFIG_ARCH_EBSA110),y)
-# This is what happens if you forget the IOCS16 line.
-# PCMCIA cards stop working.
-CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
-export CFLAGS_3c589_cs.o
-endif
+# legacy platforms provide their own mach/*.h headers globally,
+# these three are mutually exclusive
+machdirs-$(CONFIG_ARCH_FOOTBRIDGE)	+= arch/arm/mach-footbridge
+machdirs-$(CONFIG_ARCH_RPC)		+= arch/arm/mach-rpc
+machdirs-$(CONFIG_ARCH_SA1100)		+= arch/arm/mach-sa1100
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%/include,$(machdirs-y))
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-# The first directory contains additional information for the boot setup code
-ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
-else
-MACHINE  :=
-endif
-ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-MACHINE  :=
-endif
-
-machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
-platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
-
-ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y)
-KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
-endif
-endif
-
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
-core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
-# Put arch/arm/fastfpe/ to use this.
-core-$(CONFIG_FPE_FASTFPE)	+= $(patsubst $(srctree)/%,%,$(wildcard $(srctree)/arch/arm/fastfpe/))
-core-$(CONFIG_VFP)		+= arch/arm/vfp/
-core-$(CONFIG_XEN)		+= arch/arm/xen/
-core-$(CONFIG_KVM_ARM_HOST) 	+= arch/arm/kvm/
-core-$(CONFIG_VDSO)		+= arch/arm/vdso/
-
 # If we have a machine-specific directory, then include it in the build.
-core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= arch/arm/probes/
-core-y				+= arch/arm/net/
-core-y				+= arch/arm/crypto/
-core-y				+= $(machdirs) $(platdirs)
-
+core-y				+= $(patsubst %,arch/arm/mach-%/,$(machine-y))
 # For cleaning
-core-				+= $(patsubst %,arch/arm/mach-%/, $(machine-))
-core-				+= $(patsubst %,arch/arm/plat-%/, $(plat-))
+core-				+= $(patsubst %,arch/arm/mach-%/,$(machine-))
 
-drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
+core-$(CONFIG_PLAT_ORION)	+= arch/arm/plat-orion/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
 
@@ -306,14 +258,22 @@ endif
 
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
 prepare: stack_protector_prepare
+ifeq ($(CONFIG_CC_HAVE_STACKPROTECTOR_TLS),y)
 stack_protector_prepare: prepare0
 	$(eval KBUILD_CFLAGS += \
-		-fplugin-arg-arm_ssp_per_task_plugin-tso=$(shell	\
-			awk '{if ($$2 == "THREAD_SZ_ORDER") print $$3;}'\
-				include/generated/asm-offsets.h)	\
+		-mstack-protector-guard=tls \
+		-mstack-protector-guard-offset=$(shell	\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				$(objtree)/include/generated/asm-offsets.h))
+else
+stack_protector_prepare: prepare0
+	$(eval SSP_PLUGIN_CFLAGS := \
 		-fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell	\
-			awk '{if ($$2 == "TI_STACK_CANARY") print $$3;}'\
-				include/generated/asm-offsets.h))
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				$(objtree)/include/generated/asm-offsets.h))
+	$(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS))
+	$(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS))
+endif
 endif
 
 all:	$(notdir $(KBUILD_IMAGE))
@@ -337,25 +297,22 @@ bootpImage uImage: zImage
 zImage: Image
 
 $(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
+$(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-
-PHONY += vdso_install
-vdso_install:
-ifeq ($(CONFIG_VDSO),y)
-	$(Q)$(MAKE) $(build)=arch/arm/vdso $@
-endif
+	$(call cmd,install)
 
-# We use MRPROPER_FILES and CLEAN_FILES now
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
+vdso-install-$(CONFIG_VDSO) += arch/arm/vdso/vdso.so.dbg
 
 # My testing targets (bypasses dependencies)
-bp:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
+bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
 
+include $(srctree)/scripts/Makefile.defconf
+PHONY += multi_v7_lpae_defconfig
+multi_v7_lpae_defconfig:
+	$(call merge_into_defconfig,multi_v7_defconfig,lpae)
 
 define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
@@ -370,5 +327,6 @@ define archhelp
   echo  '                  Install using (your) ~/bin/$(INSTALLKERNEL) or'
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
-  echo  '  vdso_install  - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
+  echo
+  echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
index ce1c5ff746e7..8c759326baf4 100644
--- a/arch/arm/boot/.gitignore
+++ b/arch/arm/boot/.gitignore
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 Image
 zImage
 xipImage
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 0b3cd7a33a26..ba9b9a802469 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -10,29 +10,22 @@
 #
 # Copyright (C) 1995-2002 Russell King
 #
-
 OBJCOPYFLAGS	:=-O binary -R .comment -S
 
-ifneq ($(MACHINE),)
-include $(MACHINE)/Makefile.boot
-endif
-
-# Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
-PARAMS_PHYS := $(params_phys-y)
-INITRD_PHYS := $(initrd_phys-y)
+ifdef CONFIG_PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+ZRELADDR    := $(call add_hex, $(CONFIG_PHYS_OFFSET), $(TEXT_OFFSET))
+endif
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+PHYS_OFFSET := $(CONFIG_PHYS_OFFSET)
+export ZRELADDR PARAMS_PHYS PHYS_OFFSET
 
 targets := Image zImage xipImage bootpImage uImage
 
 ifeq ($(CONFIG_XIP_KERNEL),y)
 
-cmd_deflate_xip_data = $(CONFIG_SHELL) -c \
-	'$(srctree)/$(src)/deflate_xip_data.sh $< $@'
+cmd_deflate_xip_data = $(CONFIG_SHELL) -c '$(src)/deflate_xip_data.sh $< $@'
 
 ifeq ($(CONFIG_XIP_DEFLATED_DATA),y)
 quiet_cmd_mkxip = XIPZ    $@
@@ -90,29 +83,10 @@ $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
 
-$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
+$(obj)/bootp/bootp: $(obj)/zImage FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
 
-PHONY += initrd install zinstall uinstall
-initrd:
-	@test "$(INITRD_PHYS)" != "" || \
-	(echo This machine does not support INITRD; exit -1)
-	@test "$(INITRD)" != "" || \
-	(echo You must specify INITRD; exit -1)
-
-install:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
-
-zinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-uinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/uImage System.map "$(INSTALL_PATH)"
-
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
index 981a8d03f064..f3443f7d7b02 100644
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -6,7 +6,37 @@
 # architecture-specific flags and dependencies.
 #
 
-GCOV_PROFILE	:= n
+ifdef PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+
+# If PHYS_OFFSET is set, INITRD_PHYS and PARAMS_PHYS can be derived,
+# otherwise they must be passed on the command line.
+#
+# Note: the following conditions must always be true:
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
+
+# guess an initrd location if possible
+initrd_offset-$(CONFIG_ARCH_FOOTBRIDGE)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_SA1100)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_RPC)	+= 0x08000000
+INITRD_OFFSET := $(initrd_offset-y)
+ifdef INITRD_OFFSET
+INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
+endif
+
+endif
+
+PHONY += initrd
+initrd:
+	@test "$(PARAMS_PHYS)" != "" || \
+	(echo bootpImage: You must specify PHYS_OFFSET of PARAMS_PHYS ; exit -1)
+	@test "$(INITRD_PHYS)" != "" || \
+	(echo bootpImage: You must specify INITRD_OFFSET or INITRD_PHYS ; exit -1)
+	@test "$(INITRD)" != "" || \
+	(echo bootpImage: You must specify INITRD; exit -1)
 
 LDFLAGS_bootp	:= --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
@@ -24,6 +54,6 @@ $(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FOR
 
 $(obj)/kernel.o: arch/arm/boot/zImage FORCE
 
-$(obj)/initrd.o: $(INITRD) FORCE
+$(obj)/initrd.o: initrd $(INITRD) FORCE
 
 PHONY += $(INITRD)
diff --git a/arch/arm/boot/bootp/bootp.lds b/arch/arm/boot/bootp/bootp.lds
index fc54394f4340..160128186bf8 100644
--- a/arch/arm/boot/bootp/bootp.lds
+++ b/arch/arm/boot/bootp/bootp.lds
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/bootp/bootp.lds
  *
  *  Copyright (C) 2000-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 OUTPUT_ARCH(arm)
 ENTRY(_start)
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index 5c476bd2b4ce..b562da2f7040 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -13,7 +13,7 @@
  *  size immediately following the kernel, we could build this into
  *  a binary blob, and concatenate the zImage using the cat command.
  */
-		.section .start,#alloc,#execinstr
+		.section .start, "ax"
 		.type	_start, #function
 		.globl	_start
 
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 86b2f5d28240..d32f41778437 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,17 +1,4 @@
-ashldi3.S
-bswapsdi2.S
-font.c
-lib1funcs.S
-hyp-stub.S
+# SPDX-License-Identifier: GPL-2.0-only
 piggy_data
 vmlinux
 vmlinux.lds
-
-# borrowed libfdt files
-fdt.c
-fdt.h
-fdt_ro.c
-fdt_rw.c
-fdt_wip.c
-libfdt.h
-libfdt_internal.h
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 9219389bbe61..a159120d1e42 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -7,13 +7,12 @@
 
 OBJS		=
 
-AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
 HEAD	= head.o
 OBJS	+= misc.o decompress.o
 ifeq ($(CONFIG_DEBUG_UNCOMPRESS),y)
 OBJS	+= debug.o
+AFLAGS_head.o += -DDEBUG
 endif
-FONTC	= $(srctree)/lib/fonts/font_acorn_8x8.c
 
 # string library code (-Os is enforced to keep it much smaller)
 OBJS		+= string.o
@@ -23,11 +22,6 @@ ifeq ($(CONFIG_ARM_VIRT_EXT),y)
 OBJS		+= hyp-stub.o
 endif
 
-GCOV_PROFILE		:= n
-
-# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
-KCOV_INSTRUMENT		:= n
-
 #
 # Architecture dependencies
 #
@@ -68,62 +62,48 @@ ZTEXTADDR	:= 0
 ZBSSADDR	:= ALIGN(8)
 endif
 
+MALLOC_SIZE	:= 65536
+
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) -DMALLOC_SIZE=$(MALLOC_SIZE)
 CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
+CPPFLAGS_vmlinux.lds += -DTEXT_OFFSET="$(TEXT_OFFSET)"
+CPPFLAGS_vmlinux.lds += -DMALLOC_SIZE="$(MALLOC_SIZE)"
 
 compress-$(CONFIG_KERNEL_GZIP) = gzip
-compress-$(CONFIG_KERNEL_LZO)  = lzo
-compress-$(CONFIG_KERNEL_LZMA) = lzma
-compress-$(CONFIG_KERNEL_XZ)   = xzkern
-compress-$(CONFIG_KERNEL_LZ4)  = lz4
-
-# Borrowed libfdt files for the ATAG compatibility mode
-
-libfdt		:= fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
-libfdt_hdrs	:= fdt.h libfdt.h libfdt_internal.h
-
-libfdt_objs	:= $(addsuffix .o, $(basename $(libfdt)))
+compress-$(CONFIG_KERNEL_LZO)  = lzo_with_size
+compress-$(CONFIG_KERNEL_LZMA) = lzma_with_size
+compress-$(CONFIG_KERNEL_XZ)   = xzkern_with_size
+compress-$(CONFIG_KERNEL_LZ4)  = lz4_with_size
 
-$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
-	$(call cmd,shipped)
-
-$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
-	$(addprefix $(obj)/,$(libfdt_hdrs))
+libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
 
 ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
+ifeq ($(CONFIG_USE_OF),y)
+OBJS	+= $(libfdt_objs) fdt_check_mem_start.o
+endif
+
+OBJS	+= lib1funcs.o ashldi3.o bswapsdi2.o
 
 targets       := vmlinux vmlinux.lds piggy_data piggy.o \
-		 lib1funcs.o ashldi3.o bswapsdi2.o \
 		 head.o $(OBJS)
 
-clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \
-		$(libfdt) $(libfdt_hdrs) hyp-stub.S
-
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
-KBUILD_CFLAGS += $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
-
-ifeq ($(CONFIG_FUNCTION_TRACER),y)
-ORIG_CFLAGS := $(KBUILD_CFLAGS)
-KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
-endif
 
-# -fstack-protector-strong triggers protection checks in this code,
-# but it is being used too early to link to meaningful stack_chk logic.
-nossp_flags := $(call cc-option, -fno-stack-protector)
-CFLAGS_atags_to_fdt.o := $(nossp_flags)
-CFLAGS_fdt.o := $(nossp_flags)
-CFLAGS_fdt_ro.o := $(nossp_flags)
-CFLAGS_fdt_rw.o := $(nossp_flags)
-CFLAGS_fdt_wip.o := $(nossp_flags)
-
-ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin -I$(obj)
+ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
+	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
+	     $(DISABLE_KSTACK_ERASE) \
+	     -I$(obj)
+ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell echo $$(($$($(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
-		sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
-		       -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
+KBSS_SZ = $(shell echo $$(($$($(NM) vmlinux | \
+		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
@@ -136,27 +116,13 @@ endif
 LDFLAGS_vmlinux += --no-undefined
 # Delete all temporary local symbols
 LDFLAGS_vmlinux += -X
+# Report orphan sections
+ifdef CONFIG_LD_ORPHAN_WARN
+LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
+endif
 # Next argument is a linker script
 LDFLAGS_vmlinux += -T
 
-# For __aeabi_uidivmod
-lib1funcs = $(obj)/lib1funcs.o
-
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
-	$(call cmd,shipped)
-
-# For __aeabi_llsl
-ashldi3 = $(obj)/ashldi3.o
-
-$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
-	$(call cmd,shipped)
-
-# For __bswapsi2, __bswapdi2
-bswapsdi2 = $(obj)/bswapsdi2.o
-
-$(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
-	$(call cmd,shipped)
-
 # We need to prevent any GOTOFF relocs being used with references
 # to symbols in the .bss section since we cannot relocate them
 # independently from the rest at run time.  This can be achieved by
@@ -165,7 +131,7 @@ $(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
 # The .data section is already discarded by the linker script so no need
 # to bother about it here.
 check_for_bad_syms = \
-bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
+bad_syms=$$($(NM) $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
 [ -z "$$bad_syms" ] || \
   ( echo "following symbols must have non local/private scope:" >&2; \
     echo "$$bad_syms" >&2; false )
@@ -180,8 +146,8 @@ fi
 efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
 
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
-		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
-		$(bswapsdi2) $(efi-obj-y) FORCE
+		$(addprefix $(obj)/, $(OBJS)) \
+		$(efi-obj-y) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)
@@ -192,11 +158,3 @@ $(obj)/piggy_data: $(obj)/../Image FORCE
 $(obj)/piggy.o: $(obj)/piggy_data
 
 CFLAGS_font.o := -Dstatic=
-
-$(obj)/font.c: $(FONTC)
-	$(call cmd,shipped)
-
-AFLAGS_hyp-stub.o := -Wa,-march=armv7-a
-
-$(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
-	$(call cmd,shipped)
diff --git a/arch/arm/boot/compressed/ashldi3.S b/arch/arm/boot/compressed/ashldi3.S
new file mode 100644
index 000000000000..216f82eda609
--- /dev/null
+++ b/arch/arm/boot/compressed/ashldi3.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_llsl */
+#include "../../lib/ashldi3.S"
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 330cd3c2eae5..627752f18661 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -1,6 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <linux/libfdt_env.h>
 #include <asm/setup.h>
 #include <libfdt.h>
+#include "misc.h"
 
 #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
 #define do_extend_cmdline 1
@@ -14,12 +16,13 @@ static int node_offset(void *fdt, const char *node_path)
 {
 	int offset = fdt_path_offset(fdt, node_path);
 	if (offset == -FDT_ERR_NOTFOUND)
-		offset = fdt_add_subnode(fdt, 0, node_path);
+		/* Add the node to root if not found, dropping the leading '/' */
+		offset = fdt_add_subnode(fdt, 0, node_path + 1);
 	return offset;
 }
 
 static int setprop(void *fdt, const char *node_path, const char *property,
-		   uint32_t *val_array, int size)
+		   void *val_array, int size)
 {
 	int offset = node_offset(fdt, node_path);
 	if (offset < 0)
@@ -60,7 +63,7 @@ static uint32_t get_cell_size(const void *fdt)
 {
 	int len;
 	uint32_t cell_size = 1;
-	const uint32_t *size_len =  getprop(fdt, "/", "#size-cells", &len);
+	const __be32 *size_len =  getprop(fdt, "/", "#size-cells", &len);
 
 	if (size_len)
 		cell_size = fdt32_to_cpu(*size_len);
@@ -119,7 +122,7 @@ static void hex_str(char *out, uint32_t value)
 /*
  * Convert and fold provided ATAGs into the provided FDT.
  *
- * REturn values:
+ * Return values:
  *    = 0 -> pretend success
  *    = 1 -> bad ATAG (may retry with another possible ATAG pointer)
  *    < 0 -> error from libfdt
@@ -129,7 +132,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 	struct tag *atag = atag_list;
 	/* In the case of 64 bits memory size, need to reserve 2 cells for
 	 * address and size for each bank */
-	uint32_t mem_reg_property[2 * 2 * NR_BANKS];
+	__be32 mem_reg_property[2 * 2 * NR_BANKS];
 	int memcount = 0;
 	int ret, memsize;
 
@@ -138,7 +141,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 		return 1;
 
 	/* if we get a DTB here we're done already */
-	if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC))
+	if (*(__be32 *)atag_list == cpu_to_fdt32(FDT_MAGIC))
 	       return 0;
 
 	/* validate the ATAG */
@@ -177,8 +180,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 				/* if memsize is 2, that means that
 				 * each data needs 2 cells of 32 bits,
 				 * so the data are 64 bits */
-				uint64_t *mem_reg_prop64 =
-					(uint64_t *)mem_reg_property;
+				__be64 *mem_reg_prop64 =
+					(__be64 *)mem_reg_property;
 				mem_reg_prop64[memcount++] =
 					cpu_to_fdt64(atag->u.mem.start);
 				mem_reg_prop64[memcount++] =
diff --git a/arch/arm/boot/compressed/big-endian.S b/arch/arm/boot/compressed/big-endian.S
index 88e2a88d324b..0e092c36da2f 100644
--- a/arch/arm/boot/compressed/big-endian.S
+++ b/arch/arm/boot/compressed/big-endian.S
@@ -6,7 +6,7 @@
  *  Author: Nicolas Pitre
  */
 
-	.section ".start", #alloc, #execinstr
+	.section ".start", "ax"
 
 	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 	orr	r0, r0, #(1 << 7)	@ enable big endian mode
diff --git a/arch/arm/boot/compressed/bswapsdi2.S b/arch/arm/boot/compressed/bswapsdi2.S
new file mode 100644
index 000000000000..b2156b378c7b
--- /dev/null
+++ b/arch/arm/boot/compressed/bswapsdi2.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __bswapsi2, __bswapdi2 */
+#include "../../lib/bswapsdi2.S"
diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S
index 6bf2917a4621..fac40a717fcf 100644
--- a/arch/arm/boot/compressed/debug.S
+++ b/arch/arm/boot/compressed/debug.S
@@ -8,7 +8,10 @@
 
 ENTRY(putc)
 	addruart r1, r2, r3
-	waituart r3, r1
+#ifdef CONFIG_DEBUG_UART_FLOW_CONTROL
+	waituartcts r3, r1
+#endif
+	waituarttxrdy r3, r1
 	senduart r0, r1
 	busyuart r3, r1
 	mov	 pc, lr
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index aa075d8372ea..0669851394f0 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -31,6 +31,7 @@
 /* Not needed, but used in some headers pulled in by decompressors */
 extern char * strstr(const char * s1, const char *s2);
 extern size_t strlen(const char *s);
+extern int strcmp(const char *cs, const char *ct);
 extern int memcmp(const void *cs, const void *ct, size_t count);
 extern char * strchrnul(const char *, int);
 
@@ -47,7 +48,10 @@ extern char * strchrnul(const char *, int);
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
index a5983588f96b..65a3025c0e13 100644
--- a/arch/arm/boot/compressed/efi-header.S
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -9,16 +9,22 @@
 #include <linux/sizes.h>
 
 		.macro	__nop
-#ifdef CONFIG_EFI_STUB
-		@ This is almost but not quite a NOP, since it does clobber the
-		@ condition flags. But it is the best we can do for EFI, since
-		@ PE/COFF expects the magic string "MZ" at offset 0, while the
-		@ ARM/Linux boot protocol expects an executable instruction
-		@ there.
-		.inst	MZ_MAGIC | (0x1310 << 16)	@ tstne r0, #0x4d000
-#else
  AR_CLASS(	mov	r0, r0		)
   M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	IMAGE_DOS_SIGNATURE | (0xe225 << 16) @ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
 #endif
 		.endm
 
@@ -37,7 +43,7 @@
 		.long	pe_header - start		@ Offset to the PE header.
 
 pe_header:
-		.long	PE_MAGIC
+		.long	IMAGE_NT_SIGNATURE
 
 coff_header:
 		.short	IMAGE_FILE_MACHINE_THUMB	@ Machine
@@ -54,13 +60,13 @@ coff_header:
 #define __pecoff_code_size (__pecoff_data_start - __efi_start)
 
 optional_header:
-		.short	PE_OPT_MAGIC_PE32		@ PE32 format
+		.short	IMAGE_NT_OPTIONAL_HDR32_MAGIC	@ PE32 format
 		.byte	0x02				@ MajorLinkerVersion
 		.byte	0x14				@ MinorLinkerVersion
 		.long	__pecoff_code_size		@ SizeOfCode
 		.long	__pecoff_data_size		@ SizeOfInitializedData
 		.long	0				@ SizeOfUninitializedData
-		.long	efi_stub_entry - start		@ AddressOfEntryPoint
+		.long	efi_pe_entry - start		@ AddressOfEntryPoint
 		.long	start_offset			@ BaseOfCode
 		.long	__pecoff_data_start - start	@ BaseOfData
 
@@ -70,8 +76,8 @@ extra_header_fields:
 		.long	SZ_512				@ FileAlignment
 		.short	0				@ MajorOsVersion
 		.short	0				@ MinorOsVersion
-		.short	0				@ MajorImageVersion
-		.short	0				@ MinorImageVersion
+		.short	LINUX_EFISTUB_MAJOR_VERSION	@ MajorImageVersion
+		.short	LINUX_EFISTUB_MINOR_VERSION	@ MinorImageVersion
 		.short	0				@ MajorSubsystemVersion
 		.short	0				@ MinorSubsystemVersion
 		.long	0				@ Win32VersionValue
diff --git a/arch/arm/boot/compressed/fdt.c b/arch/arm/boot/compressed/fdt.c
new file mode 100644
index 000000000000..f8ea7a201ab1
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt.c"
diff --git a/arch/arm/boot/compressed/fdt_check_mem_start.c b/arch/arm/boot/compressed/fdt_check_mem_start.c
new file mode 100644
index 000000000000..aa856567fd33
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_check_mem_start.c
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/sizes.h>
+#include "misc.h"
+
+static const void *get_prop(const void *fdt, const char *node_path,
+			    const char *property, int minlen)
+{
+	const void *prop;
+	int offset, len;
+
+	offset = fdt_path_offset(fdt, node_path);
+	if (offset < 0)
+		return NULL;
+
+	prop = fdt_getprop(fdt, offset, property, &len);
+	if (!prop || len < minlen)
+		return NULL;
+
+	return prop;
+}
+
+static uint32_t get_cells(const void *fdt, const char *name)
+{
+	const fdt32_t *prop = get_prop(fdt, "/", name, sizeof(fdt32_t));
+
+	if (!prop) {
+		/* default */
+		return 1;
+	}
+
+	return fdt32_ld(prop);
+}
+
+static uint64_t get_val(const fdt32_t *cells, uint32_t ncells)
+{
+	uint64_t r;
+
+	r = fdt32_ld(cells);
+	if (ncells > 1)
+		r = (r << 32) | fdt32_ld(cells + 1);
+
+	return r;
+}
+
+/*
+ * Check the start of physical memory
+ *
+ * Traditionally, the start address of physical memory is obtained by masking
+ * the program counter.  However, this does require that this address is a
+ * multiple of 128 MiB, precluding booting Linux on platforms where this
+ * requirement is not fulfilled.
+ * Hence validate the calculated address against the memory information in the
+ * DTB, and, if out-of-range, replace it by the real start address.
+ * To preserve backwards compatibility (systems reserving a block of memory
+ * at the start of physical memory, kdump, ...), the traditional method is
+ * used if it yields a valid address, unless the "linux,usable-memory-range"
+ * property is present.
+ *
+ * Return value: start address of physical memory to use
+ */
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
+{
+	uint32_t addr_cells, size_cells, usable_base, base;
+	uint32_t fdt_mem_start = 0xffffffff;
+	const fdt32_t *usable, *reg, *endp;
+	uint64_t size, usable_end, end;
+	const char *type;
+	int offset, len;
+
+	if (!fdt)
+		return mem_start;
+
+	if (fdt_magic(fdt) != FDT_MAGIC)
+		return mem_start;
+
+	/* There may be multiple cells on LPAE platforms */
+	addr_cells = get_cells(fdt, "#address-cells");
+	size_cells = get_cells(fdt, "#size-cells");
+	if (addr_cells > 2 || size_cells > 2)
+		return mem_start;
+
+	/*
+	 * Usable memory in case of a crash dump kernel
+	 * This property describes a limitation: memory within this range is
+	 * only valid when also described through another mechanism
+	 */
+	usable = get_prop(fdt, "/chosen", "linux,usable-memory-range",
+			  (addr_cells + size_cells) * sizeof(fdt32_t));
+	if (usable) {
+		size = get_val(usable + addr_cells, size_cells);
+		if (!size)
+			return mem_start;
+
+		if (addr_cells > 1 && fdt32_ld(usable)) {
+			/* Outside 32-bit address space */
+			return mem_start;
+		}
+
+		usable_base = fdt32_ld(usable + addr_cells - 1);
+		usable_end = usable_base + size;
+	}
+
+	/* Walk all memory nodes and regions */
+	for (offset = fdt_next_node(fdt, -1, NULL); offset >= 0;
+	     offset = fdt_next_node(fdt, offset, NULL)) {
+		type = fdt_getprop(fdt, offset, "device_type", NULL);
+		if (!type || strcmp(type, "memory"))
+			continue;
+
+		reg = fdt_getprop(fdt, offset, "linux,usable-memory", &len);
+		if (!reg)
+			reg = fdt_getprop(fdt, offset, "reg", &len);
+		if (!reg)
+			continue;
+
+		for (endp = reg + (len / sizeof(fdt32_t));
+		     endp - reg >= addr_cells + size_cells;
+		     reg += addr_cells + size_cells) {
+			size = get_val(reg + addr_cells, size_cells);
+			if (!size)
+				continue;
+
+			if (addr_cells > 1 && fdt32_ld(reg)) {
+				/* Outside 32-bit address space, skipping */
+				continue;
+			}
+
+			base = fdt32_ld(reg + addr_cells - 1);
+			end = base + size;
+			if (usable) {
+				/*
+				 * Clip to usable range, which takes precedence
+				 * over mem_start
+				 */
+				if (base < usable_base)
+					base = usable_base;
+
+				if (end > usable_end)
+					end = usable_end;
+
+				if (end <= base)
+					continue;
+			} else if (mem_start >= base && mem_start < end) {
+				/* Calculated address is valid, use it */
+				return mem_start;
+			}
+
+			if (base < fdt_mem_start)
+				fdt_mem_start = base;
+		}
+	}
+
+	if (fdt_mem_start == 0xffffffff) {
+		/* No usable memory found, falling back to default */
+		return mem_start;
+	}
+
+	/*
+	 * The calculated address is not usable, or was overridden by the
+	 * "linux,usable-memory-range" property.
+	 * Use the lowest usable physical memory address from the DTB instead,
+	 * and make sure this is a multiple of 2 MiB for phys/virt patching.
+	 */
+	return round_up(fdt_mem_start, SZ_2M);
+}
diff --git a/arch/arm/boot/compressed/fdt_ro.c b/arch/arm/boot/compressed/fdt_ro.c
new file mode 100644
index 000000000000..93970a4ad5ae
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_ro.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_ro.c"
diff --git a/arch/arm/boot/compressed/fdt_rw.c b/arch/arm/boot/compressed/fdt_rw.c
new file mode 100644
index 000000000000..f7c6b8b7e01c
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_rw.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_rw.c"
diff --git a/arch/arm/boot/compressed/fdt_wip.c b/arch/arm/boot/compressed/fdt_wip.c
new file mode 100644
index 000000000000..048d2c7a088d
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_wip.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_wip.c"
diff --git a/arch/arm/boot/compressed/font.c b/arch/arm/boot/compressed/font.c
new file mode 100644
index 000000000000..46a677649db4
--- /dev/null
+++ b/arch/arm/boot/compressed/font.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fonts/font_acorn_8x8.c"
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 95abdd850fe3..23eae1a65064 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -20,10 +20,6 @@ __SA1100_start:
 #ifdef CONFIG_SA1100_COLLIE
 		mov	r7, #MACH_TYPE_COLLIE
 #endif
-#ifdef CONFIG_SA1100_SIMPAD
-		@ UNTIL we've something like an open bootldr
-		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
-#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		ands	r0, r0, #0x0d
 		beq	99f
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 93dffed0ac6e..9f406e9c0ea6 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -11,6 +11,12 @@
 
 #include "efi-header.S"
 
+#ifdef __ARMEB__
+#define OF_DT_MAGIC 0xd00dfeed
+#else
+#define OF_DT_MAGIC 0xedfe0dd0
+#endif
+
  AR_CLASS(	.arch	armv7-a	)
  M_CLASS(	.arch	armv7-m	)
 
@@ -28,19 +34,19 @@
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
 		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
 #elif defined(CONFIG_CPU_XSCALE)
 		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c8, c0, 0
 		.endm
 #else
 		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c1, c0, 0
 		.endm
 #endif
@@ -49,18 +55,19 @@
 
 #include CONFIG_DEBUG_LL_INCLUDE
 
-		.macro	writeb,	ch, rb
+		.macro	writeb,	ch, rb, tmp
+#ifdef CONFIG_DEBUG_UART_FLOW_CONTROL
+		waituartcts \tmp, \rb
+#endif
+		waituarttxrdy \tmp, \rb
 		senduart \ch, \rb
+		busyuart \tmp, \rb
 		.endm
 
 #if defined(CONFIG_ARCH_SA1100)
 		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
-#ifdef CONFIG_DEBUG_LL_SER3
-		add	\rb, \rb, #0x00050000	@ Ser3
-#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#endif
 		.endm
 #else
 		.macro	loadsp,	rb, tmp1, tmp2
@@ -81,42 +88,11 @@
 		bl	phex
 		.endm
 
-		.macro	debug_reloc_start
-#ifdef DEBUG
-		kputc	#'\n'
-		kphex	r6, 8		/* processor id */
-		kputc	#':'
-		kphex	r7, 8		/* architecture id */
-#ifdef CONFIG_CPU_CP15
-		kputc	#':'
-		mrc	p15, 0, r0, c1, c0
-		kphex	r0, 8		/* control reg */
-#endif
-		kputc	#'\n'
-		kphex	r5, 8		/* decompressed kernel start */
-		kputc	#'-'
-		kphex	r9, 8		/* decompressed kernel end  */
-		kputc	#'>'
-		kphex	r4, 8		/* kernel execution address */
-		kputc	#'\n'
-#endif
-		.endm
-
-		.macro	debug_reloc_end
-#ifdef DEBUG
-		kphex	r5, 8		/* end of kernel */
-		kputc	#'\n'
-		mov	r0, r4
-		bl	memdump		/* dump 256 bytes at start of kernel */
-#endif
-		.endm
-
 		/*
 		 * Debug kernel copy by printing the memory addresses involved
 		 */
 		.macro dbgkc, begin, end, cbegin, cend
 #ifdef DEBUG
-		kputc   #'\n'
 		kputc   #'C'
 		kputc   #':'
 		kputc   #'0'
@@ -136,11 +112,69 @@
 		kputc	#'x'
 		kphex	\cend, 8	/* End of kernel copy */
 		kputc	#'\n'
-		kputc	#'\r'
 #endif
 		.endm
 
-		.section ".start", #alloc, #execinstr
+		/*
+		 * Debug print of the final appended DTB location
+		 */
+		.macro dbgadtb, begin, size
+#ifdef DEBUG
+		kputc   #'D'
+		kputc   #'T'
+		kputc   #'B'
+		kputc   #':'
+		kputc   #'0'
+		kputc   #'x'
+		kphex   \begin, 8	/* Start of appended DTB */
+		kputc	#' '
+		kputc	#'('
+		kputc	#'0'
+		kputc	#'x'
+		kphex	\size, 8	/* Size of appended DTB */
+		kputc	#')'
+		kputc	#'\n'
+#endif
+		.endm
+
+		.macro	enable_cp15_barriers, reg
+		mrc	p15, 0, \reg, c1, c0, 0	@ read SCTLR
+		tst	\reg, #(1 << 5)		@ CP15BEN bit set?
+		bne	.L_\@
+		orr	\reg, \reg, #(1 << 5)	@ CP15 barrier instructions
+		mcr	p15, 0, \reg, c1, c0, 0	@ write SCTLR
+ ARM(		.inst   0xf57ff06f		@ v7+ isb	)
+ THUMB(		isb						)
+.L_\@:
+		.endm
+
+		/*
+		 * The kernel build system appends the size of the
+		 * decompressed kernel at the end of the compressed data
+		 * in little-endian form.
+		 */
+		.macro	get_inflated_image_size, res:req, tmp1:req, tmp2:req
+		adr	\res, .Linflated_image_size_offset
+		ldr	\tmp1, [\res]
+		add	\tmp1, \tmp1, \res	@ address of inflated image size
+
+		ldrb	\res, [\tmp1]		@ get_unaligned_le32
+		ldrb	\tmp2, [\tmp1, #1]
+		orr	\res, \res, \tmp2, lsl #8
+		ldrb	\tmp2, [\tmp1, #2]
+		ldrb	\tmp1, [\tmp1, #3]
+		orr	\res, \res, \tmp2, lsl #16
+		orr	\res, \res, \tmp1, lsl #24
+		.endm
+
+		.macro	be32tocpu, val, tmp
+#ifndef __ARMEB__
+		/* convert to little endian */
+		rev_l	\val, \tmp
+#endif
+		.endm
+
+		.section ".start", "ax"
 /*
  * sort out different calling conventions
  */
@@ -165,7 +199,8 @@ start:
 		 * were patching the initial instructions of the kernel, i.e
 		 * had started to exploit this "patch area".
 		 */
-		.rept	7
+		__initial_nops
+		.rept	5
 		__nop
 		.endr
 #ifndef CONFIG_THUMB2_KERNEL
@@ -241,10 +276,40 @@ not_angel:
 		 * are already placing their zImage in (eg) the top 64MB
 		 * of this range.
 		 */
-		mov	r4, pc
-		and	r4, r4, #0xf8000000
+		mov	r0, pc
+		and	r0, r0, #0xf8000000
+#ifdef CONFIG_USE_OF
+		adr	r1, LC1
+#ifdef CONFIG_ARM_APPENDED_DTB
+		/*
+		 * Look for an appended DTB.  If found, we cannot use it to
+		 * validate the calculated start of physical memory, as its
+		 * memory nodes may need to be augmented by ATAGS stored at
+		 * an offset from the same start of physical memory.
+		 */
+		ldr	r2, [r1, #4]	@ get &_edata
+		add	r2, r2, r1	@ relocate it
+		ldr	r2, [r2]	@ get DTB signature
+		ldr	r3, =OF_DT_MAGIC
+		cmp	r2, r3		@ do we have a DTB there?
+		beq	1f		@ if yes, skip validation
+#endif /* CONFIG_ARM_APPENDED_DTB */
+
+		/*
+		 * Make sure we have some stack before calling C code.
+		 * No GOT fixup has occurred yet, but none of the code we're
+		 * about to call uses any global variables.
+		 */
+		ldr	sp, [r1]	@ get stack location
+		add	sp, sp, r1	@ apply relocation
+
+		/* Validate calculated start against passed DTB */
+		mov	r1, r8
+		bl	fdt_check_mem_start
+1:
+#endif /* CONFIG_USE_OF */
 		/* Determine final kernel image address. */
-		add	r4, r4, #TEXT_OFFSET
+		add	r4, r0, #TEXT_OFFSET
 #else
 		ldr	r4, =zreladdr
 #endif
@@ -257,41 +322,23 @@ not_angel:
 		 */
 		mov	r0, pc
 		cmp	r0, r4
-		ldrcc	r0, LC0+32
+		ldrcc	r0, .Lheadroom
 		addcc	r0, r0, pc
 		cmpcc	r4, r0
 		orrcc	r4, r4, #1		@ remember we skipped cache_on
 		blcs	cache_on
 
-restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r6, r10, r11, r12}
-		ldr	sp, [r0, #28]
+restart:	adr	r0, LC1
+		ldr	sp, [r0]
+		ldr	r6, [r0, #4]
+		add	sp, sp, r0
+		add	r6, r6, r0
 
-		/*
-		 * We might be running at a different address.  We need
-		 * to fix up various pointers.
-		 */
-		sub	r0, r0, r1		@ calculate the delta offset
-		add	r6, r6, r0		@ _edata
-		add	r10, r10, r0		@ inflated kernel size location
-
-		/*
-		 * The kernel build system appends the size of the
-		 * decompressed kernel at the end of the compressed data
-		 * in little-endian form.
-		 */
-		ldrb	r9, [r10, #0]
-		ldrb	lr, [r10, #1]
-		orr	r9, r9, lr, lsl #8
-		ldrb	lr, [r10, #2]
-		ldrb	r10, [r10, #3]
-		orr	r9, r9, lr, lsl #16
-		orr	r9, r9, r10, lsl #24
+		get_inflated_image_size	r9, r10, lr
 
 #ifndef CONFIG_ZBOOT_ROM
 		/* malloc space is above the relocated stack (64k max) */
-		add	sp, sp, r0
-		add	r10, sp, #0x10000
+		add	r10, sp, #MALLOC_SIZE
 #else
 		/*
 		 * With ZBOOT_ROM the bss/stack is non relocatable,
@@ -304,9 +351,6 @@ restart:	adr	r0, LC0
 		mov	r5, #0			@ init dtb size to 0
 #ifdef CONFIG_ARM_APPENDED_DTB
 /*
- *   r0  = delta
- *   r2  = BSS start
- *   r3  = BSS end
  *   r4  = final kernel address (possibly with LSB set)
  *   r5  = appended dtb size (still unknown)
  *   r6  = _edata
@@ -314,8 +358,6 @@ restart:	adr	r0, LC0
  *   r8  = atags/device tree pointer
  *   r9  = size of decompressed image
  *   r10 = end of this image, including  bss/stack/malloc space if non XIP
- *   r11 = GOT start
- *   r12 = GOT end
  *   sp  = stack pointer
  *
  * if there are device trees (dtb) appended to zImage, advance r10 so that the
@@ -323,11 +365,7 @@ restart:	adr	r0, LC0
  */
 
 		ldr	lr, [r6, #0]
-#ifndef __ARMEB__
-		ldr	r1, =0xedfe0dd0		@ sig is 0xd00dfeed big endian
-#else
-		ldr	r1, =0xd00dfeed
-#endif
+		ldr	r1, =OF_DT_MAGIC
 		cmp	lr, r1
 		bne	dtb_check_done		@ not found
 
@@ -343,13 +381,8 @@ restart:	adr	r0, LC0
 
 		/* Get the initial DTB size */
 		ldr	r5, [r6, #4]
-#ifndef __ARMEB__
-		/* convert to little endian */
-		eor	r1, r5, r5, ror #16
-		bic	r1, r1, #0x00ff0000
-		mov	r5, r5, ror #8
-		eor	r5, r5, r1, lsr #8
-#endif
+		be32tocpu r5, r1
+		dbgadtb	r6, r5
 		/* 50% DTB growth should be good enough */
 		add	r5, r5, r5, lsr #1
 		/* preserve 64-bit alignment */
@@ -363,7 +396,6 @@ restart:	adr	r0, LC0
 		/* temporarily relocate the stack past the DTB work space */
 		add	sp, sp, r5
 
-		stmfd	sp!, {r0-r3, ip, lr}
 		mov	r0, r8
 		mov	r1, r6
 		mov	r2, r5
@@ -382,7 +414,6 @@ restart:	adr	r0, LC0
 		mov	r2, r5
 		bleq	atags_to_fdt
 
-		ldmfd	sp!, {r0-r3, ip, lr}
 		sub	sp, sp, r5
 #endif
 
@@ -402,13 +433,7 @@ restart:	adr	r0, LC0
 
 		/* Get the current DTB size */
 		ldr	r5, [r6, #4]
-#ifndef __ARMEB__
-		/* convert r5 (dtb size) to little endian */
-		eor	r1, r5, r5, ror #16
-		bic	r1, r1, #0x00ff0000
-		mov	r5, r5, ror #8
-		eor	r5, r5, r1, lsr #8
-#endif
+		be32tocpu r5, r1
 
 		/* preserve 64-bit alignment */
 		add	r5, r5, #7
@@ -467,15 +492,10 @@ dtb_check_done:
 
 		/*
 		 * Compute the address of the hyp vectors after relocation.
-		 * This requires some arithmetic since we cannot directly
-		 * reference __hyp_stub_vectors in a PC-relative way.
 		 * Call __hyp_set_vectors with the new address so that we
 		 * can HVC again after the copy.
 		 */
-0:		adr	r0, 0b
-		movw	r1, #:lower16:__hyp_stub_vectors - 0b
-		movt	r1, #:upper16:__hyp_stub_vectors - 0b
-		add	r0, r0, r1
+		adr_l	r0, __hyp_stub_vectors
 		sub	r0, r0, r5
 		add	r0, r0, r10
 		bl	__hyp_set_vectors
@@ -510,11 +530,8 @@ dtb_check_done:
 		/* Preserve offset to relocated code. */
 		sub	r6, r9, r6
 
-#ifndef CONFIG_ZBOOT_ROM
-		/* cache_clean_flush may use the stack, so relocate it */
-		add	sp, sp, r6
-#endif
-
+		mov	r0, r9			@ start of relocated zImage
+		add	r1, sp, r6		@ end of relocated zImage
 		bl	cache_clean_flush
 
 		badr	r0, restart
@@ -522,6 +539,10 @@ dtb_check_done:
 		mov	pc, r0
 
 wont_overwrite:
+		adr	r0, LC0
+		ldmia	r0, {r1, r2, r3, r11, r12}
+		sub	r0, r0, r1		@ calculate the delta offset
+
 /*
  * If delta is zero, we are running at the address we were linked at.
  *   r0  = delta
@@ -608,9 +629,14 @@ not_relocated:	mov	r0, #0
  */
 		mov	r0, r4
 		mov	r1, sp			@ malloc space above stack
-		add	r2, sp, #0x10000	@ 64k max
+		add	r2, sp, #MALLOC_SIZE	@ 64k max
 		mov	r3, r7
 		bl	decompress_kernel
+
+		get_inflated_image_size	r1, r2, r3
+
+		mov	r0, r4			@ start of inflated image
+		add	r1, r1, r0		@ end of inflated image
 		bl	cache_clean_flush
 		bl	cache_off
 
@@ -620,17 +646,11 @@ not_relocated:	mov	r0, #0
 		cmp	r0, #HYP_MODE		@ if not booted in HYP mode...
 		bne	__enter_kernel		@ boot kernel directly
 
-		adr	r12, .L__hyp_reentry_vectors_offset
-		ldr	r0, [r12]
-		add	r0, r0, r12
-
+		adr_l	r0, __hyp_reentry_vectors
 		bl	__hyp_set_vectors
 		__HVC(0)			@ otherwise bounce to hyp mode
 
 		b	.			@ should never be reached
-
-		.align	2
-.L__hyp_reentry_vectors_offset:	.long	__hyp_reentry_vectors - .
 #else
 		b	__enter_kernel
 #endif
@@ -640,14 +660,21 @@ not_relocated:	mov	r0, #0
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
-		.word	_edata			@ r6
-		.word	input_data_end - 4	@ r10 (inflated size location)
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
-		.word	.L_user_stack_end	@ sp
-		.word	_end - restart + 16384 + 1024*1024
 		.size	LC0, . - LC0
 
+		.type	LC1, #object
+LC1:		.word	.L_user_stack_end - LC1	@ sp
+		.word	_edata - LC1		@ r6
+		.size	LC1, . - LC1
+
+.Lheadroom:
+		.word	_end - restart + 16384 + 1024*1024
+
+.Linflated_image_size_offset:
+		.long	(input_data_end - 4) - .
+
 #ifdef CONFIG_ARCH_RPC
 		.globl	params
 params:		ldr	r0, =0x10000100		@ params_phys for RPC
@@ -657,6 +684,24 @@ params:		ldr	r0, =0x10000100		@ params_phys for RPC
 #endif
 
 /*
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
+ */
+		.macro	dcache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+		movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		ldr	\tmp, [\tmp]
+#else
+		mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+#endif
+		lsr	\tmp, \tmp, #16
+		and	\tmp, \tmp, #0xf		@ cache line size encoding
+		mov	\reg, #4			@ bytes per word
+		mov	\reg, \reg, lsl \tmp		@ actual cache line size
+		.endm
+
+/*
  * Turn on the cache.  We need to setup some page tables so that we
  * can have both the I and D caches on.
  *
@@ -820,6 +865,7 @@ __armv4_mmu_cache_on:
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
+		enable_cp15_barriers	r11
 		mov	r12, lr
 #ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
@@ -1142,13 +1188,11 @@ __armv4_mmu_cache_off:
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
 #ifdef CONFIG_MMU
-		bic	r0, r0, #0x000d
+		bic	r0, r0, #0x0005
 #else
-		bic	r0, r0, #0x000c
+		bic	r0, r0, #0x0004
 #endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
-		mov	r12, lr
-		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
 #ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
@@ -1156,11 +1200,14 @@ __armv7_mmu_cache_off:
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-		mov	pc, r12
+		mov	pc, lr
 
 /*
  * Clean and flush the cache to maintain consistency.
  *
+ * On entry,
+ *  r0 = start address
+ *  r1 = end address (exclusive)
  * On exit,
  *  r1, r2, r3, r9, r10, r11, r12 corrupted
  * This routine must preserve:
@@ -1169,6 +1216,7 @@ __armv7_mmu_cache_off:
 		.align	5
 cache_clean_flush:
 		mov	r3, #16
+		mov	r11, r1
 		b	call_cache_fn
 
 __armv4_mpu_cache_flush:
@@ -1209,6 +1257,7 @@ __armv6_mmu_cache_flush:
 		mov	pc, lr
 
 __armv7_mmu_cache_flush:
+		enable_cp15_barriers	r10
 		tst	r4, #1
 		bne	iflush
 		mrc	p15, 0, r10, c0, c1, 5	@ read ID_MMFR1
@@ -1218,51 +1267,16 @@ __armv7_mmu_cache_flush:
 		mcr	p15, 0, r10, c7, c14, 0	@ clean+invalidate D
 		b	iflush
 hierarchical:
-		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r7, r9-r11}
-		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
-		ands	r3, r0, #0x7000000	@ extract loc from clidr
-		mov	r3, r3, lsr #23		@ left align loc bit field
-		beq	finished		@ if loc is 0, then no need to clean
-		mov	r10, #0			@ start clean at cache level 0
-loop1:
-		add	r2, r10, r10, lsr #1	@ work out 3x current cache level
-		mov	r1, r0, lsr r2		@ extract cache type bits from clidr
-		and	r1, r1, #7		@ mask of the bits for current cache only
-		cmp	r1, #2			@ see what cache we have at this level
-		blt	skip			@ skip if no cache, or just i-cache
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
-		mcr	p15, 0, r10, c7, c5, 4	@ isb to sych the new cssr&csidr
-		mrc	p15, 1, r1, c0, c0, 0	@ read the new csidr
-		and	r2, r1, #7		@ extract the length of the cache lines
-		add	r2, r2, #4		@ add 4 (line length offset)
-		ldr	r4, =0x3ff
-		ands	r4, r4, r1, lsr #3	@ find maximum number on the way size
-		clz	r5, r4			@ find bit position of way size increment
-		ldr	r7, =0x7fff
-		ands	r7, r7, r1, lsr #13	@ extract max number of the index size
-loop2:
-		mov	r9, r4			@ create working copy of max way size
-loop3:
- ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
- ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
- THUMB(		lsl	r6, r9, r5		)
- THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
- THUMB(		lsl	r6, r7, r2		)
- THUMB(		orr	r11, r11, r6		) @ factor index number into r11
-		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
-		subs	r9, r9, #1		@ decrement the way
-		bge	loop3
-		subs	r7, r7, #1		@ decrement the index
-		bge	loop2
-skip:
-		add	r10, r10, #2		@ increment cache number
-		cmp	r3, r10
-		bgt	loop1
-finished:
-		ldmfd	sp!, {r0-r7, r9-r11}
-		mov	r10, #0			@ switch back to cache level 0
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
+		dcache_line_size r1, r2		@ r1 := dcache min line size
+		sub	r2, r1, #1		@ r2 := line size mask
+		bic	r0, r0, r2		@ round down start to line size
+		sub	r11, r11, #1		@ end address is exclusive
+		bic	r11, r11, r2		@ round down end to line size
+0:		cmp	r0, r11			@ finished?
+		bgt	iflush
+		mcr	p15, 0, r0, c7, c14, 1	@ Dcache clean/invalidate by VA
+		add	r0, r0, r1
+		b	0b
 iflush:
 		mcr	p15, 0, r10, c7, c10, 4	@ DSB
 		mcr	p15, 0, r10, c7, c5, 0	@ invalidate I+BTB
@@ -1273,7 +1287,7 @@ iflush:
 __armv5tej_mmu_cache_flush:
 		tst	r4, #1
 		movne	pc, lr
-1:		mrc	p15, 0, r15, c7, c14, 3	@ test,clean,invalidate D cache
+1:		mrc	p15, 0, APSR_nzcv, c7, c14, 3	@ test,clean,invalidate D cache
 		bne	1b
 		mcr	p15, 0, r0, c7, c5, 0	@ flush I cache
 		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
@@ -1351,7 +1365,7 @@ puts:		loadsp	r3, r2, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
 		moveq	pc, lr
-2:		writeb	r2, r3
+2:		writeb	r2, r3, r1
 		mov	r1, #0x00020000
 3:		subs	r1, r1, #1
 		bne	3b
@@ -1405,7 +1419,11 @@ memdump:	mov	r12, r0
 __hyp_reentry_vectors:
 		W(b)	.			@ reset
 		W(b)	.			@ undef
+#ifdef CONFIG_EFI_STUB
+		W(b)	__enter_kernel_from_hyp	@ hvc from HYP
+#else
 		W(b)	.			@ svc
+#endif
 		W(b)	.			@ pabort
 		W(b)	.			@ dabort
 		W(b)	__enter_kernel		@ hyp
@@ -1424,64 +1442,87 @@ __enter_kernel:
 reloc_code_end:
 
 #ifdef CONFIG_EFI_STUB
-		.align	2
-_start:		.long	start - .
-
-ENTRY(efi_stub_entry)
-		@ allocate space on stack for passing current zImage address
-		@ and for the EFI stub to return of new entry point of
-		@ zImage, as EFI stub may copy the kernel. Pointer address
-		@ is passed in r2. r0 and r1 are passed through from the
-		@ EFI firmware to efi_entry
-		adr	ip, _start
-		ldr	r3, [ip]
-		add	r3, r3, ip
-		stmfd	sp!, {r3, lr}
-		mov	r2, sp			@ pass zImage address in r2
-		bl	efi_entry
-
-		@ Check for error return from EFI stub. r0 has FDT address
-		@ or error code.
-		cmn	r0, #1
-		beq	efi_load_fail
-
-		@ Preserve return value of efi_entry() in r4
-		mov	r4, r0
-
-		@ our cache maintenance code relies on CP15 barrier instructions
-		@ but since we arrived here with the MMU and caches configured
-		@ by UEFI, we must check that the CP15BEN bit is set in SCTLR.
-		@ Note that this bit is RAO/WI on v6 and earlier, so the ISB in
-		@ the enable path will be executed on v7+ only.
-		mrc	p15, 0, r1, c1, c0, 0	@ read SCTLR
-		tst	r1, #(1 << 5)		@ CP15BEN bit set?
-		bne	0f
-		orr	r1, r1, #(1 << 5)	@ CP15 barrier instructions
-		mcr	p15, 0, r1, c1, c0, 0	@ write SCTLR
- ARM(		.inst	0xf57ff06f		@ v7+ isb	)
- THUMB(		isb						)
+__enter_kernel_from_hyp:
+		mrc	p15, 4, r0, c1, c0, 0	@ read HSCTLR
+		bic	r0, r0, #0x5		@ disable MMU and caches
+		mcr	p15, 4, r0, c1, c0, 0	@ write HSCTLR
+		isb
+		b	__enter_kernel
 
-0:		bl	cache_clean_flush
-		bl	cache_off
+ENTRY(efi_enter_kernel)
+		mov	r4, r0			@ preserve image base
+		mov	r8, r1			@ preserve DT pointer
 
-		@ Set parameters for booting zImage according to boot protocol
-		@ put FDT address in r2, it was returned by efi_entry()
-		@ r1 is the machine type, and r0 needs to be 0
-		mov	r0, #0
-		mov	r1, #0xFFFFFFFF
-		mov	r2, r4
-
-		@ Branch to (possibly) relocated zImage that is in [sp]
-		ldr	lr, [sp]
-		ldr	ip, =start_offset
-		add	lr, lr, ip
-		mov	pc, lr				@ no mode switch
-
-efi_load_fail:
-		@ Return EFI_LOAD_ERROR to EFI firmware on error.
-		ldr	r0, =0x80000001
-		ldmfd	sp!, {ip, pc}
-ENDPROC(efi_stub_entry)
+		adr_l	r0, call_cache_fn
+		adr	r1, 0f			@ clean the region of code we
+		bl	cache_clean_flush	@ may run with the MMU off
+
+#ifdef CONFIG_ARM_VIRT_EXT
+		@
+		@ The EFI spec does not support booting on ARM in HYP mode,
+		@ since it mandates that the MMU and caches are on, with all
+		@ 32-bit addressable DRAM mapped 1:1 using short descriptors.
+		@
+		@ While the EDK2 reference implementation adheres to this,
+		@ U-Boot might decide to enter the EFI stub in HYP mode
+		@ anyway, with the MMU and caches either on or off.
+		@
+		mrs	r0, cpsr		@ get the current mode
+		msr	spsr_cxsf, r0		@ record boot mode
+		and	r0, r0, #MODE_MASK	@ are we running in HYP mode?
+		cmp	r0, #HYP_MODE
+		bne	.Lefi_svc
+
+		mrc	p15, 4, r1, c1, c0, 0	@ read HSCTLR
+		tst	r1, #0x1		@ MMU enabled at HYP?
+		beq	1f
+
+		@
+		@ When running in HYP mode with the caches on, we're better
+		@ off just carrying on using the cached 1:1 mapping that the
+		@ firmware provided. Set up the HYP vectors so HVC instructions
+		@ issued from HYP mode take us to the correct handler code. We
+		@ will disable the MMU before jumping to the kernel proper.
+		@
+ ARM(		bic	r1, r1, #(1 << 30)	) @ clear HSCTLR.TE
+ THUMB(		orr	r1, r1, #(1 << 30)	) @ set HSCTLR.TE
+		mcr	p15, 4, r1, c1, c0, 0
+		adr	r0, __hyp_reentry_vectors
+		mcr	p15, 4, r0, c12, c0, 0	@ set HYP vector base (HVBAR)
+		isb
+		b	.Lefi_hyp
+
+		@
+		@ When running in HYP mode with the caches off, we need to drop
+		@ into SVC mode now, and let the decompressor set up its cached
+		@ 1:1 mapping as usual.
+		@
+1:		mov	r9, r4			@ preserve image base
+		bl	__hyp_stub_install	@ install HYP stub vectors
+		safe_svcmode_maskall	r1	@ drop to SVC mode
+		msr	spsr_cxsf, r0		@ record boot mode
+		orr	r4, r9, #1		@ restore image base and set LSB
+		b	.Lefi_hyp
+.Lefi_svc:
+#endif
+		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
+		tst	r0, #0x1		@ MMU enabled?
+		orreq	r4, r4, #1		@ set LSB if not
+
+.Lefi_hyp:
+		mov	r0, r8			@ DT start
+		add	r1, r8, r2		@ DT end
+		bl	cache_clean_flush
+
+		adr	r0, 0f			@ switch to our stack
+		ldr	sp, [r0]
+		add	sp, sp, r0
+
+		mov	r5, #0			@ appended DTB size
+		mov	r7, #0xFFFFFFFF		@ machine ID
+		b	wont_overwrite
+ENDPROC(efi_enter_kernel)
+0:		.long	.L_user_stack_end - .
 #endif
 
 		.align
diff --git a/arch/arm/boot/compressed/hyp-stub.S b/arch/arm/boot/compressed/hyp-stub.S
new file mode 100644
index 000000000000..a703eaa86f10
--- /dev/null
+++ b/arch/arm/boot/compressed/hyp-stub.S
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include "../../kernel/hyp-stub.S"
diff --git a/arch/arm/boot/compressed/lib1funcs.S b/arch/arm/boot/compressed/lib1funcs.S
new file mode 100644
index 000000000000..815dec73ba4d
--- /dev/null
+++ b/arch/arm/boot/compressed/lib1funcs.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_uidivmod */
+#include "../../lib/lib1funcs.S"
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
deleted file mode 100644
index b36c0289a308..000000000000
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ARM_LIBFDT_ENV_H
-#define _ARM_LIBFDT_ENV_H
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
-
-#define INT_MAX			((int)(~0U>>1))
-
-typedef __be16 fdt16_t;
-typedef __be32 fdt32_t;
-typedef __be64 fdt64_t;
-
-#define fdt16_to_cpu(x)		be16_to_cpu(x)
-#define cpu_to_fdt16(x)		cpu_to_be16(x)
-#define fdt32_to_cpu(x)		be32_to_cpu(x)
-#define cpu_to_fdt32(x)		cpu_to_be32(x)
-#define fdt64_to_cpu(x)		be64_to_cpu(x)
-#define cpu_to_fdt64(x)		cpu_to_be64(x)
-
-#endif
diff --git a/arch/arm/boot/compressed/misc-ep93xx.h b/arch/arm/boot/compressed/misc-ep93xx.h
new file mode 100644
index 000000000000..65b4121d1490
--- /dev/null
+++ b/arch/arm/boot/compressed/misc-ep93xx.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#include <asm/mach-types.h>
+
+static inline unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
+static inline void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+	*((volatile unsigned char *)ptr) = value;
+}
+
+static inline void __raw_writel(unsigned int value, unsigned int ptr)
+{
+	*((volatile unsigned int *)ptr) = value;
+}
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL		0x80010020
+#define ETH_SELF_CTL_RESET		0x00000001
+
+static inline void ep93xx_ethernet_reset(void)
+{
+	unsigned int v;
+
+	/* Reset the ethernet MAC.  */
+	v = __raw_readl(PHYS_ETH_SELF_CTL);
+	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+	/* Wait for reset to finish.  */
+	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+		;
+}
+
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
+#define TS72XX_WDT_FEED_VAL		0x05
+
+static inline void __maybe_unused ts72xx_watchdog_disable(void)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
+	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
+}
+
+static inline void ep93xx_decomp_setup(void)
+{
+	if (machine_is_ts72xx())
+		ts72xx_watchdog_disable();
+
+	if (machine_is_edb9301() ||
+	    machine_is_edb9302() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9307() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9312() ||
+	    machine_is_edb9315() ||
+	    machine_is_edb9315a() ||
+	    machine_is_edb9315a() ||
+	    machine_is_ts72xx() ||
+	    machine_is_bk3() ||
+	    machine_is_vision_ep9307())
+		ep93xx_ethernet_reset();
+}
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index e1e9a5dde853..6c41b270560e 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -23,6 +23,9 @@ unsigned int __machine_arch_type;
 #include <linux/types.h>
 #include <linux/linkage.h>
 #include "misc.h"
+#ifdef CONFIG_ARCH_EP93XX
+#include "misc-ep93xx.h"
+#endif
 
 static void putstr(const char *ptr);
 
@@ -100,9 +103,6 @@ static void putstr(const char *ptr)
 /*
  * gzip declarations
  */
-extern char input_data[];
-extern char input_data_end[];
-
 unsigned char *output_data;
 
 unsigned long free_mem_ptr;
@@ -128,16 +128,6 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-const unsigned long __stack_chk_guard = 0x000a0dff;
-
-void __stack_chk_fail(void)
-{
-	error("stack-protector: Kernel stack is corrupted\n");
-}
-
-extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
-
-
 void
 decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 		unsigned long free_mem_ptr_end_p,
@@ -150,6 +140,9 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
+#ifdef CONFIG_ARCH_EP93XX
+	ep93xx_decomp_setup();
+#endif
 	arch_decomp_setup();
 
 	putstr("Uncompressing Linux...");
@@ -161,7 +154,7 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 		putstr(" done, booting the kernel.\n");
 }
 
-void fortify_panic(const char *name)
+void __fortify_panic(const u8 reason, size_t avail, size_t size)
 {
 	error("detected buffer overflow");
 }
diff --git a/arch/arm/boot/compressed/misc.h b/arch/arm/boot/compressed/misc.h
index c958dccd1d97..8c73940b5fe4 100644
--- a/arch/arm/boot/compressed/misc.h
+++ b/arch/arm/boot/compressed/misc.h
@@ -6,5 +6,16 @@
 void error(char *x) __noreturn;
 extern unsigned long free_mem_ptr;
 extern unsigned long free_mem_end_ptr;
+void __div0(void);
+void
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+		  unsigned long free_mem_ptr_end_p, int arch_id);
+void __fortify_panic(const u8 reason, size_t avail, size_t size);
+int atags_to_fdt(void *atag_list, void *fdt, int total_space);
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt);
+int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
+
+extern char input_data[];
+extern char input_data_end[];
 
 #endif
diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.S
index 0284f84dcf38..27577644ee72 100644
--- a/arch/arm/boot/compressed/piggy.S
+++ b/arch/arm/boot/compressed/piggy.S
@@ -1,5 +1,5 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-	.section .piggydata,#alloc
+	.section .piggydata, "a"
 	.globl	input_data
 input_data:
 	.incbin	"arch/arm/boot/compressed/piggy_data"
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
index ade5079bebbf..fcc678fce045 100644
--- a/arch/arm/boot/compressed/string.c
+++ b/arch/arm/boot/compressed/string.c
@@ -5,8 +5,28 @@
  * Small subset of simple string routines
  */
 
+#define __NO_FORTIFY
 #include <linux/string.h>
 
+/*
+ * The decompressor is built without KASan but uses the same redirects as the
+ * rest of the kernel when CONFIG_KASAN is enabled, defining e.g. memcpy()
+ * to __memcpy() but since we are not linking with the main kernel string
+ * library in the decompressor, that will lead to link failures.
+ *
+ * Undefine KASan's versions, define the wrapped functions and alias them to
+ * the right names so that when e.g. __memcpy() appear in the code, it will
+ * still be linked to this local version of memcpy().
+ */
+#ifdef CONFIG_KASAN
+#undef memcpy
+#undef memmove
+#undef memset
+void *__memcpy(void *__dest, __const void *__src, size_t __n) __alias(memcpy);
+void *__memmove(void *__dest, __const void *__src, size_t count) __alias(memmove);
+void *__memset(void *s, int c, size_t count) __alias(memset);
+#endif
+
 void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i = 0;
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index fc7ed03d8b93..d411abd4310e 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -2,6 +2,7 @@
 /*
  *  Copyright (C) 2000 Russell King
  */
+#include <asm/vmlinux.lds.h>
 
 #ifdef CONFIG_CPU_ENDIAN_BE8
 #define ZIMAGE_MAGIC(x) ( (((x) >> 24) & 0x000000ff) | \
@@ -17,8 +18,12 @@ ENTRY(_start)
 SECTIONS
 {
   /DISCARD/ : {
+    COMMON_DISCARDS
     *(.ARM.exidx*)
     *(.ARM.extab*)
+    *(.note.*)
+    *(.rel.*)
+    *(.printk_index)
     /*
      * Discard any r/w data - this produces a link error if we have any,
      * which is required for PIC decompression.  Local data generates
@@ -36,17 +41,16 @@ SECTIONS
     *(.start)
     *(.text)
     *(.text.*)
-    *(.fixup)
-    *(.gnu.warning)
-    *(.glue_7t)
-    *(.glue_7)
+    ARM_STUBS_TEXT
   }
   .table : ALIGN(4) {
     _table_start = .;
-    LONG(ZIMAGE_MAGIC(2))
+    LONG(ZIMAGE_MAGIC(6))
     LONG(ZIMAGE_MAGIC(0x5a534c4b))
     LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start))
     LONG(ZIMAGE_MAGIC(_kernel_bss_size))
+    LONG(ZIMAGE_MAGIC(TEXT_OFFSET))
+    LONG(ZIMAGE_MAGIC(MALLOC_SIZE))
     LONG(0)
     _table_end = .;
   }
@@ -54,6 +58,7 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
     *(.data.rel.ro)
+    *(.data.rel.ro.*)
   }
   .piggydata : {
     *(.piggydata)
@@ -64,9 +69,11 @@ SECTIONS
   _etext = .;
 
   .got.plt		: { *(.got.plt) }
+#ifndef CONFIG_EFI_STUB
   _got_start = .;
   .got			: { *(.got) }
   _got_end = .;
+#endif
 
   /* ensure the zImage file size is always a multiple of 64 bits */
   /* (without a dummy byte, ld just ignores the empty section) */
@@ -75,11 +82,14 @@ SECTIONS
 #ifdef CONFIG_EFI_STUB
   .data : ALIGN(4096) {
     __pecoff_data_start = .;
+    _got_start = .;
+    *(.got)
+    _got_end = .;
     /*
      * The EFI stub always executes from RAM, and runs strictly before the
      * decompressor, so we can make an exception for its r/w data, and keep it
      */
-    *(.data.efistub)
+    *(.data.efistub .bss.efistub)
     __pecoff_data_end = .;
 
     /*
@@ -115,7 +125,7 @@ SECTIONS
 
   . = BSS_START;
   __bss_start = .;
-  .bss			: { *(.bss) }
+  .bss			: { *(.bss .bss.*) }
   _end = .;
 
   . = ALIGN(8);		/* the stack must be 64-bit aligned */
@@ -124,12 +134,10 @@ SECTIONS
   PROVIDE(__pecoff_data_size = ALIGN(512) - ADDR(.data));
   PROVIDE(__pecoff_end = ALIGN(512));
 
-  .stab 0		: { *(.stab) }
-  .stabstr 0		: { *(.stabstr) }
-  .stab.excl 0		: { *(.stab.excl) }
-  .stab.exclstr 0	: { *(.stab.exclstr) }
-  .stab.index 0		: { *(.stab.index) }
-  .stab.indexstr 0	: { *(.stab.indexstr) }
-  .comment 0		: { *(.comment) }
+  STABS_DEBUG
+  DWARF_DEBUG
+  ARM_DETAILS
+
+  ARM_ASSERTS
 }
 ASSERT(_edata_real == _edata, "error: zImage file size is incorrect");
diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh
index 40937248cebe..304495c3c2c5 100755
--- a/arch/arm/boot/deflate_xip_data.sh
+++ b/arch/arm/boot/deflate_xip_data.sh
@@ -56,7 +56,7 @@ trap 'rm -f "$XIPIMAGE.tmp"; exit 1' 1 2 3
 # substitute the data section by a compressed version
 $DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp"
 $DD if="$XIPIMAGE"  skip=$data_start iflag=skip_bytes |
-gzip -9 >> "$XIPIMAGE.tmp"
+$KGZIP -9 >> "$XIPIMAGE.tmp"
 
 # replace kernel binary
 mv -f "$XIPIMAGE.tmp" "$XIPIMAGE"
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b21b3a64641a..efe38eb25301 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,1305 +1,41 @@
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_ALPINE) += \
-	alpine-db.dtb
-dtb-$(CONFIG_MACH_ARTPEC6) += \
-	artpec6-devboard.dtb
-dtb-$(CONFIG_MACH_ASM9260) += \
-	alphascale-asm9260-devkit.dtb
-# Keep at91 dtb files sorted alphabetically for each SoC
-dtb-$(CONFIG_SOC_AT91RM9200) += \
-	at91rm9200ek.dtb \
-	mpa1600.dtb
-dtb-$(CONFIG_SOC_AT91SAM9) += \
-	animeo_ip.dtb \
-	at91-qil_a9260.dtb \
-	aks-cdu.dtb \
-	ethernut5.dtb \
-	evk-pro3.dtb \
-	tny_a9260.dtb \
-	usb_a9260.dtb \
-	at91sam9260ek.dtb \
-	at91sam9261ek.dtb \
-	at91sam9263ek.dtb \
-	at91-sam9_l9260.dtb \
-	tny_a9263.dtb \
-	usb_a9263.dtb \
-	at91-foxg20.dtb \
-	at91-kizbox.dtb \
-	at91sam9g20ek.dtb \
-	at91sam9g20ek_2mmc.dtb \
-	tny_a9g20.dtb \
-	usb_a9g20.dtb \
-	usb_a9g20_lpw.dtb \
-	at91sam9m10g45ek.dtb \
-	pm9g45.dtb \
-	at91sam9n12ek.dtb \
-	at91sam9rlek.dtb \
-	at91-ariag25.dtb \
-	at91-ariettag25.dtb \
-	at91-cosino_mega2560.dtb \
-	at91-kizboxmini.dtb \
-	at91-wb45n.dtb \
-	at91sam9g15ek.dtb \
-	at91sam9g25ek.dtb \
-	at91sam9g35ek.dtb \
-	at91sam9x25ek.dtb \
-	at91sam9x35ek.dtb
-dtb-$(CONFIG_SOC_SAM_V7) += \
-	at91-kizbox2.dtb \
-	at91-nattis-2-natte-2.dtb \
-	at91-sama5d27_som1_ek.dtb \
-	at91-sama5d2_ptc_ek.dtb \
-	at91-sama5d2_xplained.dtb \
-	at91-sama5d3_xplained.dtb \
-	at91-dvk_som60.dtb \
-	at91-gatwick.dtb \
-	at91-tse850-3.dtb \
-	at91-wb50n.dtb \
-	sama5d31ek.dtb \
-	sama5d33ek.dtb \
-	sama5d34ek.dtb \
-	sama5d35ek.dtb \
-	sama5d36ek.dtb \
-	sama5d36ek_cmp.dtb \
-	at91-sama5d4_ma5d4evk.dtb \
-	at91-sama5d4_xplained.dtb \
-	at91-sama5d4ek.dtb \
-	at91-vinco.dtb
-dtb-$(CONFIG_ARCH_ATLAS6) += \
-	atlas6-evb.dtb
-dtb-$(CONFIG_ARCH_ATLAS7) += \
-	atlas7-evb.dtb
-dtb-$(CONFIG_ARCH_AXXIA) += \
-	axm5516-amarillo.dtb
-dtb-$(CONFIG_ARCH_BCM2835) += \
-	bcm2835-rpi-b.dtb \
-	bcm2835-rpi-a.dtb \
-	bcm2835-rpi-b-rev2.dtb \
-	bcm2835-rpi-b-plus.dtb \
-	bcm2835-rpi-a-plus.dtb \
-	bcm2835-rpi-cm1-io1.dtb \
-	bcm2836-rpi-2-b.dtb \
-	bcm2837-rpi-3-a-plus.dtb \
-	bcm2837-rpi-3-b.dtb \
-	bcm2837-rpi-3-b-plus.dtb \
-	bcm2837-rpi-cm3-io3.dtb \
-	bcm2835-rpi-zero.dtb \
-	bcm2835-rpi-zero-w.dtb
-dtb-$(CONFIG_ARCH_BCM_5301X) += \
-	bcm4708-asus-rt-ac56u.dtb \
-	bcm4708-asus-rt-ac68u.dtb \
-	bcm4708-buffalo-wzr-1750dhp.dtb \
-	bcm4708-linksys-ea6300-v1.dtb \
-	bcm4708-linksys-ea6500-v2.dtb \
-	bcm4708-luxul-xap-1510.dtb \
-	bcm4708-luxul-xwc-1000.dtb \
-	bcm4708-netgear-r6250.dtb \
-	bcm4708-netgear-r6300-v2.dtb \
-	bcm4708-smartrg-sr400ac.dtb \
-	bcm47081-asus-rt-n18u.dtb \
-	bcm47081-buffalo-wzr-600dhp2.dtb \
-	bcm47081-buffalo-wzr-900dhp.dtb \
-	bcm47081-luxul-xap-1410.dtb \
-	bcm47081-luxul-xwr-1200.dtb \
-	bcm47081-tplink-archer-c5-v2.dtb \
-	bcm4709-asus-rt-ac87u.dtb \
-	bcm4709-buffalo-wxr-1900dhp.dtb \
-	bcm4709-linksys-ea9200.dtb \
-	bcm4709-netgear-r7000.dtb \
-	bcm4709-netgear-r8000.dtb \
-	bcm4709-tplink-archer-c9-v1.dtb \
-	bcm47094-dlink-dir-885l.dtb \
-	bcm47094-linksys-panamera.dtb \
-	bcm47094-luxul-abr-4500.dtb \
-	bcm47094-luxul-xap-1610.dtb \
-	bcm47094-luxul-xbr-4500.dtb \
-	bcm47094-luxul-xwr-3100.dtb \
-	bcm47094-luxul-xwr-3150-v1.dtb \
-	bcm47094-netgear-r8500.dtb \
-	bcm47094-phicomm-k3.dtb \
-	bcm94708.dtb \
-	bcm94709.dtb \
-	bcm953012er.dtb \
-	bcm953012hr.dtb \
-	bcm953012k.dtb
-dtb-$(CONFIG_ARCH_BCM_53573) += \
-	bcm47189-luxul-xap-1440.dtb \
-	bcm47189-luxul-xap-810.dtb \
-	bcm47189-tenda-ac9.dtb \
-	bcm947189acdbmr.dtb
-dtb-$(CONFIG_ARCH_BCM_63XX) += \
-	bcm963138dvt.dtb
-dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
-	bcm911360_entphn.dtb \
-	bcm911360k.dtb \
-	bcm958300k.dtb \
-	bcm958305k.dtb
-dtb-$(CONFIG_ARCH_BCM_HR2) += \
-	bcm53340-ubnt-unifi-switch8.dtb
-dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
-	bcm28155-ap.dtb \
-	bcm21664-garnet.dtb \
-	bcm23550-sparrow.dtb
-dtb-$(CONFIG_ARCH_BCM_NSP) += \
-	bcm958522er.dtb \
-	bcm958525er.dtb \
-	bcm958525xmc.dtb \
-	bcm958622hr.dtb \
-	bcm958623hr.dtb \
-	bcm958625hr.dtb \
-	bcm988312hr.dtb \
-	bcm958625k.dtb
-dtb-$(CONFIG_ARCH_BERLIN) += \
-	berlin2-sony-nsz-gs7.dtb \
-	berlin2cd-google-chromecast.dtb \
-	berlin2cd-valve-steamlink.dtb \
-	berlin2q-marvell-dmp.dtb
-dtb-$(CONFIG_ARCH_BRCMSTB) += \
-	bcm7445-bcm97445svmb.dtb
-dtb-$(CONFIG_ARCH_CLPS711X) += \
-	ep7211-edb7211.dtb
-dtb-$(CONFIG_ARCH_DAVINCI) += \
-	da850-lcdk.dtb \
-	da850-enbw-cmc.dtb \
-	da850-evm.dtb \
-	da850-lego-ev3.dtb
-dtb-$(CONFIG_ARCH_DIGICOLOR) += \
-	cx92755_equinox.dtb
-dtb-$(CONFIG_ARCH_EFM32) += \
-	efm32gg-dk3750.dtb
-dtb-$(CONFIG_ARCH_EXYNOS3) += \
-	exynos3250-artik5-eval.dtb \
-	exynos3250-monk.dtb \
-	exynos3250-rinato.dtb
-dtb-$(CONFIG_ARCH_EXYNOS4) += \
-	exynos4210-origen.dtb \
-	exynos4210-smdkv310.dtb \
-	exynos4210-trats.dtb \
-	exynos4210-universal_c210.dtb \
-	exynos4412-i9300.dtb \
-	exynos4412-i9305.dtb \
-	exynos4412-itop-elite.dtb \
-	exynos4412-n710x.dtb \
-	exynos4412-odroidu3.dtb \
-	exynos4412-odroidx.dtb \
-	exynos4412-odroidx2.dtb \
-	exynos4412-origen.dtb \
-	exynos4412-smdk4412.dtb \
-	exynos4412-tiny4412.dtb \
-	exynos4412-trats2.dtb
-dtb-$(CONFIG_ARCH_EXYNOS5) += \
-	exynos5250-arndale.dtb \
-	exynos5250-smdk5250.dtb \
-	exynos5250-snow.dtb \
-	exynos5250-snow-rev5.dtb \
-	exynos5250-spring.dtb \
-	exynos5260-xyref5260.dtb \
-	exynos5410-odroidxu.dtb \
-	exynos5410-smdk5410.dtb \
-	exynos5420-arndale-octa.dtb \
-	exynos5420-peach-pit.dtb \
-	exynos5420-smdk5420.dtb \
-	exynos5422-odroidhc1.dtb \
-	exynos5422-odroidxu3.dtb \
-	exynos5422-odroidxu3-lite.dtb \
-	exynos5422-odroidxu4.dtb \
-	exynos5800-peach-pi.dtb
-dtb-$(CONFIG_ARCH_GEMINI) += \
-	gemini-dlink-dir-685.dtb \
-	gemini-dlink-dns-313.dtb \
-	gemini-nas4220b.dtb \
-	gemini-rut1xx.dtb \
-	gemini-sl93512r.dtb \
-	gemini-sq201.dtb \
-	gemini-wbd111.dtb \
-	gemini-wbd222.dtb
-dtb-$(CONFIG_ARCH_HI3xxx) += \
-	hi3620-hi4511.dtb
-dtb-$(CONFIG_ARCH_HIGHBANK) += \
-	highbank.dtb \
-	ecx-2000.dtb
-dtb-$(CONFIG_ARCH_HIP01) += \
-	hip01-ca9x2.dtb
-dtb-$(CONFIG_ARCH_HIP04) += \
-	hip04-d01.dtb
-dtb-$(CONFIG_ARCH_HISI) += \
-	hi3519-demb.dtb
-dtb-$(CONFIG_ARCH_HIX5HD2) += \
-	hisi-x5hd2-dkb.dtb
-dtb-$(CONFIG_ARCH_INTEGRATOR) += \
-	integratorap.dtb \
-	integratorcp.dtb
-dtb-$(CONFIG_ARCH_IXP4XX) += \
-	intel-ixp42x-linksys-nslu2.dtb \
-	intel-ixp43x-gateworks-gw2358.dtb
-dtb-$(CONFIG_ARCH_KEYSTONE) += \
-	keystone-k2hk-evm.dtb \
-	keystone-k2l-evm.dtb \
-	keystone-k2e-evm.dtb \
-	keystone-k2g-evm.dtb \
-	keystone-k2g-ice.dtb
-dtb-$(CONFIG_MACH_KIRKWOOD) += \
-	kirkwood-b3.dtb \
-	kirkwood-blackarmor-nas220.dtb \
-	kirkwood-cloudbox.dtb \
-	kirkwood-d2net.dtb \
-	kirkwood-db-88f6281.dtb \
-	kirkwood-db-88f6282.dtb \
-	kirkwood-dir665.dtb \
-	kirkwood-dns320.dtb \
-	kirkwood-dns325.dtb \
-	kirkwood-dockstar.dtb \
-	kirkwood-dreamplug.dtb \
-	kirkwood-ds109.dtb \
-	kirkwood-ds110jv10.dtb \
-	kirkwood-ds111.dtb \
-	kirkwood-ds112.dtb \
-	kirkwood-ds209.dtb \
-	kirkwood-ds210.dtb \
-	kirkwood-ds212.dtb \
-	kirkwood-ds212j.dtb \
-	kirkwood-ds409.dtb \
-	kirkwood-ds409slim.dtb \
-	kirkwood-ds411.dtb \
-	kirkwood-ds411j.dtb \
-	kirkwood-ds411slim.dtb \
-	kirkwood-goflexnet.dtb \
-	kirkwood-guruplug-server-plus.dtb \
-	kirkwood-ib62x0.dtb \
-	kirkwood-iconnect.dtb \
-	kirkwood-iomega_ix2_200.dtb \
-	kirkwood-is2.dtb \
-	kirkwood-km_kirkwood.dtb \
-	kirkwood-laplug.dtb \
-	kirkwood-linkstation-lsqvl.dtb \
-	kirkwood-linkstation-lsvl.dtb \
-	kirkwood-linkstation-lswsxl.dtb \
-	kirkwood-linkstation-lswvl.dtb \
-	kirkwood-linkstation-lswxl.dtb \
-	kirkwood-linksys-viper.dtb \
-	kirkwood-lschlv2.dtb \
-	kirkwood-lsxhl.dtb \
-	kirkwood-mplcec4.dtb \
-	kirkwood-mv88f6281gtw-ge.dtb \
-	kirkwood-nas2big.dtb \
-	kirkwood-net2big.dtb \
-	kirkwood-net5big.dtb \
-	kirkwood-netgear_readynas_duo_v2.dtb \
-	kirkwood-netgear_readynas_nv+_v2.dtb \
-	kirkwood-ns2.dtb \
-	kirkwood-ns2lite.dtb \
-	kirkwood-ns2max.dtb \
-	kirkwood-ns2mini.dtb \
-	kirkwood-nsa310.dtb \
-	kirkwood-nsa310a.dtb \
-	kirkwood-nsa320.dtb \
-	kirkwood-nsa325.dtb \
-	kirkwood-openblocks_a6.dtb \
-	kirkwood-openblocks_a7.dtb \
-	kirkwood-openrd-base.dtb \
-	kirkwood-openrd-client.dtb \
-	kirkwood-openrd-ultimate.dtb \
-	kirkwood-pogo_e02.dtb \
-	kirkwood-pogoplug-series-4.dtb \
-	kirkwood-rd88f6192.dtb \
-	kirkwood-rd88f6281-z0.dtb \
-	kirkwood-rd88f6281-a.dtb \
-	kirkwood-rs212.dtb \
-	kirkwood-rs409.dtb \
-	kirkwood-rs411.dtb \
-	kirkwood-sheevaplug.dtb \
-	kirkwood-sheevaplug-esata.dtb \
-	kirkwood-t5325.dtb \
-	kirkwood-topkick.dtb \
-	kirkwood-ts219-6281.dtb \
-	kirkwood-ts219-6282.dtb \
-	kirkwood-ts419-6281.dtb \
-	kirkwood-ts419-6282.dtb
-dtb-$(CONFIG_ARCH_LPC18XX) += \
-	lpc4337-ciaa.dtb \
-	lpc4350-hitex-eval.dtb \
-	lpc4357-ea4357-devkit.dtb \
-	lpc4357-myd-lpc4357.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += \
-	lpc3250-ea3250.dtb \
-	lpc3250-phy3250.dtb
-dtb-$(CONFIG_ARCH_NPCM7XX) += \
-	nuvoton-npcm750-evb.dtb
-dtb-$(CONFIG_MACH_MESON6) += \
-	meson6-atv1200.dtb
-dtb-$(CONFIG_MACH_MESON8) += \
-	meson8-minix-neo-x8.dtb \
-	meson8b-ec100.dtb \
-	meson8b-mxq.dtb \
-	meson8b-odroidc1.dtb \
-	meson8m2-mxiii-plus.dtb
-dtb-$(CONFIG_ARCH_MMP) += \
-	pxa168-aspenite.dtb \
-	pxa910-dkb.dtb \
-	mmp2-brownstone.dtb \
-	mmp2-olpc-xo-1-75.dtb
-dtb-$(CONFIG_ARCH_MPS2) += \
-	mps2-an385.dtb \
-	mps2-an399.dtb
-dtb-$(CONFIG_ARCH_MOXART) += \
-	moxart-uc7112lx.dtb
-dtb-$(CONFIG_SOC_IMX1) += \
-	imx1-ads.dtb \
-	imx1-apf9328.dtb
-dtb-$(CONFIG_SOC_IMX25) += \
-	imx25-eukrea-mbimxsd25-baseboard.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
-	imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
-	imx25-karo-tx25.dtb \
-	imx25-pdk.dtb
-dtb-$(CONFIG_SOC_IMX27) += \
-	imx27-apf27.dtb \
-	imx27-apf27dev.dtb \
-	imx27-eukrea-mbimxsd27-baseboard.dtb \
-	imx27-pdk.dtb \
-	imx27-phytec-phycore-rdk.dtb \
-	imx27-phytec-phycard-s-rdk.dtb
-dtb-$(CONFIG_SOC_IMX31) += \
-	imx31-bug.dtb \
-	imx31-lite.dtb
-dtb-$(CONFIG_SOC_IMX35) += \
-	imx35-eukrea-mbimxsd35-baseboard.dtb \
-	imx35-pdk.dtb
-dtb-$(CONFIG_SOC_IMX50) += \
-	imx50-evk.dtb \
-	imx50-kobo-aura.dtb
-dtb-$(CONFIG_SOC_IMX51) += \
-	imx51-apf51.dtb \
-	imx51-apf51dev.dtb \
-	imx51-babbage.dtb \
-	imx51-digi-connectcore-jsk.dtb \
-	imx51-eukrea-mbimxsd51-baseboard.dtb \
-	imx51-ts4800.dtb \
-	imx51-zii-rdu1.dtb \
-	imx51-zii-scu2-mezz.dtb \
-	imx51-zii-scu3-esb.dtb
-dtb-$(CONFIG_SOC_IMX53) += \
-	imx53-ard.dtb \
-	imx53-cx9020.dtb \
-	imx53-kp-ddc.dtb \
-	imx53-kp-hsc.dtb \
-	imx53-m53evk.dtb \
-	imx53-m53menlo.dtb \
-	imx53-mba53.dtb \
-	imx53-ppd.dtb \
-	imx53-qsb.dtb \
-	imx53-qsrb.dtb \
-	imx53-smd.dtb \
-	imx53-tx53-x03x.dtb \
-	imx53-tx53-x13x.dtb \
-	imx53-usbarmory.dtb \
-	imx53-voipac-bsb.dtb
-dtb-$(CONFIG_SOC_IMX6Q) += \
-	imx6dl-apf6dev.dtb \
-	imx6dl-aristainetos_4.dtb \
-	imx6dl-aristainetos_7.dtb \
-	imx6dl-aristainetos2_4.dtb \
-	imx6dl-aristainetos2_7.dtb \
-	imx6dl-colibri-eval-v3.dtb \
-	imx6dl-cubox-i.dtb \
-	imx6dl-cubox-i-emmc-som-v15.dtb \
-	imx6dl-cubox-i-som-v15.dtb \
-	imx6dl-dfi-fs700-m60.dtb \
-	imx6dl-eckelmann-ci4x10.dtb \
-	imx6dl-emcon-avari.dtb \
-	imx6dl-gw51xx.dtb \
-	imx6dl-gw52xx.dtb \
-	imx6dl-gw53xx.dtb \
-	imx6dl-gw54xx.dtb \
-	imx6dl-gw551x.dtb \
-	imx6dl-gw552x.dtb \
-	imx6dl-gw553x.dtb \
-	imx6dl-gw560x.dtb \
-	imx6dl-gw5903.dtb \
-	imx6dl-gw5904.dtb \
-	imx6dl-hummingboard.dtb \
-	imx6dl-hummingboard-emmc-som-v15.dtb \
-	imx6dl-hummingboard-som-v15.dtb \
-	imx6dl-hummingboard2.dtb \
-	imx6dl-hummingboard2-emmc-som-v15.dtb \
-	imx6dl-hummingboard2-som-v15.dtb \
-	imx6dl-icore.dtb \
-	imx6dl-icore-mipi.dtb \
-	imx6dl-icore-rqs.dtb \
-	imx6dl-mamoj.dtb \
-	imx6dl-nit6xlite.dtb \
-	imx6dl-nitrogen6x.dtb \
-	imx6dl-phytec-mira-rdk-nand.dtb \
-	imx6dl-phytec-pbab01.dtb \
-	imx6dl-rex-basic.dtb \
-	imx6dl-riotboard.dtb \
-	imx6dl-sabreauto.dtb \
-	imx6dl-sabrelite.dtb \
-	imx6dl-sabresd.dtb \
-	imx6dl-savageboard.dtb \
-	imx6dl-ts4900.dtb \
-	imx6dl-ts7970.dtb \
-	imx6dl-tx6dl-comtft.dtb \
-	imx6dl-tx6s-8034.dtb \
-	imx6dl-tx6s-8034-mb7.dtb \
-	imx6dl-tx6s-8035.dtb \
-	imx6dl-tx6s-8035-mb7.dtb \
-	imx6dl-tx6u-801x.dtb \
-	imx6dl-tx6u-80xx-mb7.dtb \
-	imx6dl-tx6u-8033.dtb \
-	imx6dl-tx6u-8033-mb7.dtb \
-	imx6dl-tx6u-811x.dtb \
-	imx6dl-tx6u-81xx-mb7.dtb \
-	imx6dl-udoo.dtb \
-	imx6dl-wandboard.dtb \
-	imx6dl-wandboard-revb1.dtb \
-	imx6dl-wandboard-revd1.dtb \
-	imx6dl-yapp4-draco.dtb \
-	imx6dl-yapp4-hydra.dtb \
-	imx6dl-yapp4-ursa.dtb \
-	imx6q-apalis-eval.dtb \
-	imx6q-apalis-ixora.dtb \
-	imx6q-apalis-ixora-v1.1.dtb \
-	imx6q-apf6dev.dtb \
-	imx6q-arm2.dtb \
-	imx6q-b450v3.dtb \
-	imx6q-b650v3.dtb \
-	imx6q-b850v3.dtb \
-	imx6q-cm-fx6.dtb \
-	imx6q-cubox-i.dtb \
-	imx6q-cubox-i-emmc-som-v15.dtb \
-	imx6q-cubox-i-som-v15.dtb \
-	imx6q-dfi-fs700-m60.dtb \
-	imx6q-dhcom-pdk2.dtb \
-	imx6q-display5-tianma-tm070-1280x768.dtb \
-	imx6q-dmo-edmqmx6.dtb \
-	imx6q-dms-ba16.dtb \
-	imx6q-emcon-avari.dtb \
-	imx6q-evi.dtb \
-	imx6q-gk802.dtb \
-	imx6q-gw51xx.dtb \
-	imx6q-gw52xx.dtb \
-	imx6q-gw53xx.dtb \
-	imx6q-gw5400-a.dtb \
-	imx6q-gw54xx.dtb \
-	imx6q-gw551x.dtb \
-	imx6q-gw552x.dtb \
-	imx6q-gw553x.dtb \
-	imx6q-gw560x.dtb \
-	imx6q-gw5903.dtb \
-	imx6q-gw5904.dtb \
-	imx6q-h100.dtb \
-	imx6q-hummingboard.dtb \
-	imx6q-hummingboard-emmc-som-v15.dtb \
-	imx6q-hummingboard-som-v15.dtb \
-	imx6q-hummingboard2.dtb \
-	imx6q-hummingboard2-emmc-som-v15.dtb \
-	imx6q-hummingboard2-som-v15.dtb \
-	imx6q-icore.dtb \
-	imx6q-icore-mipi.dtb \
-	imx6q-icore-ofcap10.dtb \
-	imx6q-icore-ofcap12.dtb \
-	imx6q-icore-rqs.dtb \
-	imx6q-kp-tpc.dtb \
-	imx6q-marsboard.dtb \
-	imx6q-mccmon6.dtb \
-	imx6q-nitrogen6x.dtb \
-	imx6q-nitrogen6_max.dtb \
-	imx6q-nitrogen6_som2.dtb \
-	imx6q-novena.dtb \
-	imx6q-phytec-mira-rdk-emmc.dtb \
-	imx6q-phytec-mira-rdk-nand.dtb \
-	imx6q-phytec-pbab01.dtb \
-	imx6q-pistachio.dtb \
-	imx6q-rex-pro.dtb \
-	imx6q-sabreauto.dtb \
-	imx6q-sabrelite.dtb \
-	imx6q-sabresd.dtb \
-	imx6q-savageboard.dtb \
-	imx6q-sbc6x.dtb \
-	imx6q-tbs2910.dtb \
-	imx6q-ts4900.dtb \
-	imx6q-ts7970.dtb \
-	imx6q-tx6q-1010.dtb \
-	imx6q-tx6q-1010-comtft.dtb \
-	imx6q-tx6q-1020.dtb \
-	imx6q-tx6q-1020-comtft.dtb \
-	imx6q-tx6q-1036.dtb \
-	imx6q-tx6q-1036-mb7.dtb \
-	imx6q-tx6q-10x0-mb7.dtb \
-	imx6q-tx6q-1110.dtb \
-	imx6q-tx6q-11x0-mb7.dtb \
-	imx6q-udoo.dtb \
-	imx6q-utilite-pro.dtb \
-	imx6q-var-dt6customboard.dtb \
-	imx6q-wandboard.dtb \
-	imx6q-wandboard-revb1.dtb \
-	imx6q-wandboard-revd1.dtb \
-	imx6q-zii-rdu2.dtb \
-	imx6qp-nitrogen6_max.dtb \
-	imx6qp-nitrogen6_som2.dtb \
-	imx6qp-phytec-mira-rdk-nand.dtb \
-	imx6qp-sabreauto.dtb \
-	imx6qp-sabresd.dtb \
-	imx6qp-tx6qp-8037.dtb \
-	imx6qp-tx6qp-8037-mb7.dtb \
-	imx6qp-tx6qp-8137.dtb \
-	imx6qp-tx6qp-8137-mb7.dtb \
-	imx6qp-wandboard-revd1.dtb \
-	imx6qp-zii-rdu2.dtb
-dtb-$(CONFIG_SOC_IMX6SL) += \
-	imx6sl-evk.dtb \
-	imx6sl-warp.dtb
-dtb-$(CONFIG_SOC_IMX6SLL) += \
-	imx6sll-evk.dtb
-dtb-$(CONFIG_SOC_IMX6SX) += \
-	imx6sx-nitrogen6sx.dtb \
-	imx6sx-sabreauto.dtb \
-	imx6sx-sdb-reva.dtb \
-	imx6sx-sdb-sai.dtb \
-	imx6sx-sdb.dtb \
-	imx6sx-softing-vining-2000.dtb \
-	imx6sx-udoo-neo-basic.dtb \
-	imx6sx-udoo-neo-extended.dtb \
-	imx6sx-udoo-neo-full.dtb
-dtb-$(CONFIG_SOC_IMX6UL) += \
-	imx6ul-14x14-evk.dtb \
-	imx6ul-ccimx6ulsbcexpress.dtb \
-	imx6ul-ccimx6ulsbcpro.dtb \
-	imx6ul-geam.dtb \
-	imx6ul-isiot-emmc.dtb \
-	imx6ul-isiot-nand.dtb \
-	imx6ul-kontron-n6310-s.dtb \
-	imx6ul-kontron-n6310-s-43.dtb \
-	imx6ul-liteboard.dtb \
-	imx6ul-opos6uldev.dtb \
-	imx6ul-pico-hobbit.dtb \
-	imx6ul-pico-pi.dtb \
-	imx6ul-phytec-segin-ff-rdk-nand.dtb \
-	imx6ul-tx6ul-0010.dtb \
-	imx6ul-tx6ul-0011.dtb \
-	imx6ul-tx6ul-mainboard.dtb \
-	imx6ull-14x14-evk.dtb \
-	imx6ull-colibri-eval-v3.dtb \
-	imx6ull-colibri-wifi-eval-v3.dtb \
-	imx6ull-phytec-segin-ff-rdk-nand.dtb \
-	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
-	imx6ull-phytec-segin-lc-rdk-nand.dtb \
-	imx6ulz-14x14-evk.dtb
-dtb-$(CONFIG_SOC_IMX7D) += \
-	imx7d-cl-som-imx7.dtb \
-	imx7d-colibri-emmc-eval-v3.dtb \
-	imx7d-colibri-eval-v3.dtb \
-	imx7d-mba7.dtb \
-	imx7d-meerkat96.dtb \
-	imx7d-nitrogen7.dtb \
-	imx7d-pico-hobbit.dtb \
-	imx7d-pico-pi.dtb \
-	imx7d-sbc-imx7.dtb \
-	imx7d-sdb.dtb \
-	imx7d-sdb-reva.dtb \
-	imx7d-sdb-sht11.dtb \
-	imx7d-zii-rmu2.dtb \
-	imx7d-zii-rpu2.dtb \
-	imx7s-colibri-eval-v3.dtb \
-	imx7s-mba7.dtb \
-	imx7s-warp.dtb
-dtb-$(CONFIG_SOC_IMX7ULP) += \
-	imx7ulp-evk.dtb
-dtb-$(CONFIG_SOC_LS1021A) += \
-	ls1021a-moxa-uc-8410a.dtb \
-	ls1021a-qds.dtb \
-	ls1021a-tsn.dtb \
-	ls1021a-twr.dtb
-dtb-$(CONFIG_SOC_VF610) += \
-	vf500-colibri-eval-v3.dtb \
-	vf610-bk4.dtb \
-	vf610-colibri-eval-v3.dtb \
-	vf610m4-colibri.dtb \
-	vf610-cosmic.dtb \
-	vf610m4-cosmic.dtb \
-	vf610-twr.dtb \
-	vf610-zii-cfu1.dtb \
-	vf610-zii-dev-rev-b.dtb \
-	vf610-zii-dev-rev-c.dtb \
-	vf610-zii-scu4-aib.dtb \
-	vf610-zii-spb4.dtb \
-	vf610-zii-ssmb-dtu.dtb \
-	vf610-zii-ssmb-spu3.dtb
-dtb-$(CONFIG_ARCH_MXS) += \
-	imx23-evk.dtb \
-	imx23-olinuxino.dtb \
-	imx23-sansa.dtb \
-	imx23-stmp378x_devb.dtb \
-	imx23-xfi3.dtb \
-	imx28-apf28.dtb \
-	imx28-apf28dev.dtb \
-	imx28-apx4devkit.dtb \
-	imx28-cfa10036.dtb \
-	imx28-cfa10037.dtb \
-	imx28-cfa10049.dtb \
-	imx28-cfa10055.dtb \
-	imx28-cfa10056.dtb \
-	imx28-cfa10057.dtb \
-	imx28-cfa10058.dtb \
-	imx28-duckbill-2-485.dtb \
-	imx28-duckbill-2.dtb \
-	imx28-duckbill-2-enocean.dtb \
-	imx28-duckbill-2-spi.dtb \
-	imx28-duckbill.dtb \
-	imx28-eukrea-mbmx283lc.dtb \
-	imx28-eukrea-mbmx287lc.dtb \
-	imx28-evk.dtb \
-	imx28-m28cu3.dtb \
-	imx28-m28evk.dtb \
-	imx28-sps1.dtb \
-	imx28-ts4600.dtb \
-	imx28-tx28.dtb
-dtb-$(CONFIG_ARCH_NOMADIK) += \
-	ste-nomadik-s8815.dtb \
-	ste-nomadik-nhk15.dtb
-dtb-$(CONFIG_ARCH_NSPIRE) += \
-	nspire-cx.dtb \
-	nspire-tp.dtb \
-	nspire-clp.dtb
-dtb-$(CONFIG_ARCH_OMAP2) += \
-	omap2420-h4.dtb \
-	omap2420-n800.dtb \
-	omap2420-n810.dtb \
-	omap2420-n810-wimax.dtb \
-	omap2430-sdp.dtb
-dtb-$(CONFIG_ARCH_OMAP3) += \
-	am3517-craneboard.dtb \
-	am3517-evm.dtb \
-	am3517_mt_ventoux.dtb \
-	logicpd-torpedo-37xx-devkit.dtb \
-	logicpd-som-lv-37xx-devkit.dtb \
-	omap3430-sdp.dtb \
-	omap3-beagle.dtb \
-	omap3-beagle-xm.dtb \
-	omap3-beagle-xm-ab.dtb \
-	omap3-cm-t3517.dtb \
-	omap3-cm-t3530.dtb \
-	omap3-cm-t3730.dtb \
-	omap3-devkit8000.dtb \
-	omap3-devkit8000-lcd43.dtb \
-	omap3-devkit8000-lcd70.dtb \
-	omap3-evm.dtb \
-	omap3-evm-37xx.dtb \
-	omap3-gta04a3.dtb \
-	omap3-gta04a4.dtb \
-	omap3-gta04a5.dtb \
-	omap3-gta04a5one.dtb \
-	omap3-ha.dtb \
-	omap3-ha-lcd.dtb \
-	omap3-igep0020.dtb \
-	omap3-igep0020-rev-f.dtb \
-	omap3-igep0030.dtb \
-	omap3-igep0030-rev-g.dtb \
-	omap3-ldp.dtb \
-	omap3-lilly-dbb056.dtb \
-	omap3-n900.dtb \
-	omap3-n9.dtb \
-	omap3-n950.dtb \
-	omap3-overo-alto35.dtb \
-	omap3-overo-chestnut43.dtb \
-	omap3-overo-gallop43.dtb \
-	omap3-overo-palo35.dtb \
-	omap3-overo-palo43.dtb \
-	omap3-overo-storm-alto35.dtb \
-	omap3-overo-storm-chestnut43.dtb \
-	omap3-overo-storm-gallop43.dtb \
-	omap3-overo-storm-palo35.dtb \
-	omap3-overo-storm-palo43.dtb \
-	omap3-overo-storm-summit.dtb \
-	omap3-overo-storm-tobi.dtb \
-	omap3-overo-storm-tobiduo.dtb \
-	omap3-overo-summit.dtb \
-	omap3-overo-tobi.dtb \
-	omap3-overo-tobiduo.dtb \
-	omap3-pandora-600mhz.dtb \
-	omap3-pandora-1ghz.dtb \
-	omap3-sbc-t3517.dtb \
-	omap3-sbc-t3530.dtb \
-	omap3-sbc-t3730.dtb \
-	omap3-sniper.dtb \
-	omap3-thunder.dtb \
-	omap3-zoom3.dtb
-dtb-$(CONFIG_SOC_TI81XX) += \
-	am3874-iceboard.dtb \
-	dm8148-evm.dtb \
-	dm8148-t410.dtb \
-	dm8168-evm.dtb \
-	dra62x-j5eco-evm.dtb
-dtb-$(CONFIG_SOC_AM33XX) += \
-	am335x-baltos-ir2110.dtb \
-	am335x-baltos-ir3220.dtb \
-	am335x-baltos-ir5221.dtb \
-	am335x-base0033.dtb \
-	am335x-bone.dtb \
-	am335x-boneblack.dtb \
-	am335x-boneblack-wireless.dtb \
-	am335x-boneblue.dtb \
-	am335x-bonegreen.dtb \
-	am335x-bonegreen-wireless.dtb \
-	am335x-chiliboard.dtb \
-	am335x-cm-t335.dtb \
-	am335x-evm.dtb \
-	am335x-evmsk.dtb \
-	am335x-guardian.dtb \
-	am335x-icev2.dtb \
-	am335x-lxm.dtb \
-	am335x-moxa-uc-2101.dtb \
-	am335x-moxa-uc-8100-me-t.dtb \
-	am335x-nano.dtb \
-	am335x-pdu001.dtb \
-	am335x-pepper.dtb \
-	am335x-phycore-rdk.dtb \
-	am335x-pocketbeagle.dtb \
-	am335x-regor-rdk.dtb \
-	am335x-sancloud-bbe.dtb \
-	am335x-shc.dtb \
-	am335x-sbc-t335.dtb \
-	am335x-sl50.dtb \
-	am335x-wega-rdk.dtb \
-	am335x-osd3358-sm-red.dtb
-dtb-$(CONFIG_ARCH_OMAP4) += \
-	omap4-droid4-xt894.dtb \
-	omap4-duovero-parlor.dtb \
-	omap4-kc1.dtb \
-	omap4-panda.dtb \
-	omap4-panda-a4.dtb \
-	omap4-panda-es.dtb \
-	omap4-sdp.dtb \
-	omap4-sdp-es23plus.dtb \
-	omap4-var-dvk-om44.dtb \
-	omap4-var-stk-om44.dtb
-dtb-$(CONFIG_SOC_AM43XX) += \
-	am43x-epos-evm.dtb \
-	am437x-cm-t43.dtb \
-	am437x-gp-evm.dtb \
-	am437x-idk-evm.dtb \
-	am437x-sbc-t43.dtb \
-	am437x-sk-evm.dtb
-dtb-$(CONFIG_SOC_OMAP5) += \
-	omap5-cm-t54.dtb \
-	omap5-igep0050.dtb \
-	omap5-sbc-t54.dtb \
-	omap5-uevm.dtb
-dtb-$(CONFIG_SOC_DRA7XX) += \
-	am57xx-beagle-x15.dtb \
-	am57xx-beagle-x15-revb1.dtb \
-	am57xx-beagle-x15-revc.dtb \
-	am57xx-cl-som-am57x.dtb \
-	am57xx-sbc-am57x.dtb \
-	am572x-idk.dtb \
-	am571x-idk.dtb \
-	am574x-idk.dtb \
-	dra7-evm.dtb \
-	dra72-evm.dtb \
-	dra72-evm-revc.dtb \
-	dra71-evm.dtb \
-	dra76-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += \
-	orion5x-kuroboxpro.dtb \
-	orion5x-lacie-d2-network.dtb \
-	orion5x-lacie-ethernet-disk-mini-v2.dtb \
-	orion5x-linkstation-lsgl.dtb \
-	orion5x-linkstation-lswtgl.dtb \
-	orion5x-linkstation-lschl.dtb \
-	orion5x-lswsgl.dtb \
-	orion5x-maxtor-shared-storage-2.dtb \
-	orion5x-netgear-wnr854t.dtb \
-	orion5x-rd88f5182-nas.dtb
-dtb-$(CONFIG_ARCH_ACTIONS) += \
-	owl-s500-cubieboard6.dtb \
-	owl-s500-guitar-bb-rev-b.dtb \
-	owl-s500-sparky.dtb
-dtb-$(CONFIG_ARCH_PRIMA2) += \
-	prima2-evb.dtb
-dtb-$(CONFIG_ARCH_PXA) += \
-	pxa300-raumfeld-connector.dtb \
-	pxa300-raumfeld-controller.dtb \
-	pxa300-raumfeld-speaker-l.dtb \
-	pxa300-raumfeld-speaker-m.dtb \
-	pxa300-raumfeld-speaker-one.dtb \
-	pxa300-raumfeld-speaker-s.dtb
-dtb-$(CONFIG_ARCH_OXNAS) += \
-	ox810se-wd-mbwe.dtb \
-	ox820-cloudengines-pogoplug-series-3.dtb
-dtb-$(CONFIG_ARCH_QCOM) += \
-	qcom-apq8060-dragonboard.dtb \
-	qcom-apq8064-cm-qs600.dtb \
-	qcom-apq8064-ifc6410.dtb \
-	qcom-apq8064-sony-xperia-yuga.dtb \
-	qcom-apq8064-asus-nexus7-flo.dtb \
-	qcom-apq8074-dragonboard.dtb \
-	qcom-apq8084-ifc6540.dtb \
-	qcom-apq8084-mtp.dtb \
-	qcom-ipq4019-ap.dk01.1-c1.dtb \
-	qcom-ipq4019-ap.dk04.1-c1.dtb \
-	qcom-ipq4019-ap.dk04.1-c3.dtb \
-	qcom-ipq4019-ap.dk07.1-c1.dtb \
-	qcom-ipq4019-ap.dk07.1-c2.dtb \
-	qcom-ipq8064-ap148.dtb \
-	qcom-msm8660-surf.dtb \
-	qcom-msm8960-cdp.dtb \
-	qcom-msm8974-fairphone-fp2.dtb \
-	qcom-msm8974-lge-nexus5-hammerhead.dtb \
-	qcom-msm8974-samsung-klte.dtb \
-	qcom-msm8974-sony-xperia-amami.dtb \
-	qcom-msm8974-sony-xperia-castor.dtb \
-	qcom-msm8974-sony-xperia-honami.dtb \
-	qcom-mdm9615-wp8548-mangoh-green.dtb
-dtb-$(CONFIG_ARCH_RDA) += \
-	rda8810pl-orangepi-2g-iot.dtb \
-	rda8810pl-orangepi-i96.dtb
-dtb-$(CONFIG_ARCH_REALVIEW) += \
-	arm-realview-pb1176.dtb \
-	arm-realview-pb11mp.dtb \
-	arm-realview-eb.dtb \
-	arm-realview-eb-bbrevd.dtb \
-	arm-realview-eb-11mp.dtb \
-	arm-realview-eb-11mp-bbrevd.dtb \
-	arm-realview-eb-11mp-ctrevb.dtb \
-	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
-	arm-realview-eb-a9mp.dtb \
-	arm-realview-eb-a9mp-bbrevd.dtb \
-	arm-realview-pba8.dtb \
-	arm-realview-pbx-a9.dtb
-dtb-$(CONFIG_ARCH_RENESAS) += \
-	emev2-kzm9d.dtb \
-	r7s72100-genmai.dtb \
-	r7s72100-gr-peach.dtb \
-	r7s72100-rskrza1.dtb \
-	r7s9210-rza2mevb.dtb \
-	r8a73a4-ape6evm.dtb \
-	r8a7740-armadillo800eva.dtb \
-	r8a7743-iwg20d-q7.dtb \
-	r8a7743-iwg20d-q7-dbcm-ca.dtb \
-	r8a7743-sk-rzg1m.dtb \
-	r8a7744-iwg20d-q7.dtb \
-	r8a7744-iwg20d-q7-dbcm-ca.dtb \
-	r8a7745-iwg22d-sodimm.dtb \
-	r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
-	r8a7745-sk-rzg1e.dtb \
-	r8a77470-iwg23s-sbc.dtb \
-	r8a7778-bockw.dtb \
-	r8a7779-marzen.dtb \
-	r8a7790-lager.dtb \
-	r8a7790-stout.dtb \
-	r8a7791-koelsch.dtb \
-	r8a7791-porter.dtb \
-	r8a7792-blanche.dtb \
-	r8a7792-wheat.dtb \
-	r8a7793-gose.dtb \
-	r8a7794-alt.dtb \
-	r8a7794-silk.dtb \
-	r9a06g032-rzn1d400-db.dtb \
-	sh73a0-kzm9g.dtb
-dtb-$(CONFIG_ARCH_ROCKCHIP) += \
-	rv1108-elgin-r1.dtb \
-	rv1108-evb.dtb \
-	rk3036-evb.dtb \
-	rk3036-kylin.dtb \
-	rk3066a-bqcurie2.dtb \
-	rk3066a-marsboard.dtb \
-	rk3066a-mk808.dtb \
-	rk3066a-rayeager.dtb \
-	rk3188-bqedison2qc.dtb \
-	rk3188-px3-evb.dtb \
-	rk3188-radxarock.dtb \
-	rk3228-evb.dtb \
-	rk3229-evb.dtb \
-	rk3229-xms6.dtb \
-	rk3288-evb-act8846.dtb \
-	rk3288-evb-rk808.dtb \
-	rk3288-firefly-beta.dtb \
-	rk3288-firefly.dtb \
-	rk3288-firefly-reload.dtb \
-	rk3288-miqi.dtb \
-	rk3288-phycore-rdk.dtb \
-	rk3288-popmetal.dtb \
-	rk3288-r89.dtb \
-	rk3288-rock2-square.dtb \
-	rk3288-tinker.dtb \
-	rk3288-tinker-s.dtb \
-	rk3288-veyron-brain.dtb \
-	rk3288-veyron-fievel.dtb \
-	rk3288-veyron-jaq.dtb \
-	rk3288-veyron-jerry.dtb \
-	rk3288-veyron-mickey.dtb \
-	rk3288-veyron-mighty.dtb \
-	rk3288-veyron-minnie.dtb \
-	rk3288-veyron-pinky.dtb \
-	rk3288-veyron-speedy.dtb \
-	rk3288-veyron-tiger.dtb \
-	rk3288-vyasa.dtb
-dtb-$(CONFIG_ARCH_S3C24XX) += \
-	s3c2416-smdk2416.dtb
-dtb-$(CONFIG_ARCH_S3C64XX) += \
-	s3c6410-mini6410.dtb \
-	s3c6410-smdk6410.dtb
-dtb-$(CONFIG_ARCH_S5PV210) += \
-	s5pv210-aquila.dtb \
-	s5pv210-fascinate4g.dtb \
-	s5pv210-galaxys.dtb \
-	s5pv210-goni.dtb \
-	s5pv210-smdkc110.dtb \
-	s5pv210-smdkv210.dtb \
-	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += \
-	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_socdk_nand.dtb \
-	socfpga_arria10_socdk_qspi.dtb \
-	socfpga_arria10_socdk_sdmmc.dtb \
-	socfpga_cyclone5_chameleon96.dtb \
-	socfpga_cyclone5_mcvevk.dtb \
-	socfpga_cyclone5_socdk.dtb \
-	socfpga_cyclone5_de0_nano_soc.dtb \
-	socfpga_cyclone5_sockit.dtb \
-	socfpga_cyclone5_socrates.dtb \
-	socfpga_cyclone5_sodia.dtb \
-	socfpga_cyclone5_vining_fpga.dtb \
-	socfpga_vt.dtb
-dtb-$(CONFIG_ARCH_SPEAR13XX) += \
-	spear1310-evb.dtb \
-	spear1340-evb.dtb
-dtb-$(CONFIG_ARCH_SPEAR3XX) += \
-	spear300-evb.dtb \
-	spear310-evb.dtb \
-	spear320-evb.dtb \
-	spear320-hmi.dtb
-dtb-$(CONFIG_ARCH_SPEAR6XX) += \
-	spear600-evb.dtb
-dtb-$(CONFIG_ARCH_STI) += \
-	stih407-b2120.dtb \
-	stih410-b2120.dtb \
-	stih410-b2260.dtb \
-	stih418-b2199.dtb
-dtb-$(CONFIG_ARCH_STM32) += \
-	stm32f429-disco.dtb \
-	stm32f469-disco.dtb \
-	stm32f746-disco.dtb \
-	stm32f769-disco.dtb \
-	stm32429i-eval.dtb \
-	stm32746g-eval.dtb \
-	stm32h743i-eval.dtb \
-	stm32h743i-disco.dtb \
-	stm32mp157a-avenger96.dtb \
-	stm32mp157a-dk1.dtb \
-	stm32mp157c-dk2.dtb \
-	stm32mp157c-ed1.dtb \
-	stm32mp157c-ev1.dtb
-dtb-$(CONFIG_MACH_SUN4I) += \
-	sun4i-a10-a1000.dtb \
-	sun4i-a10-ba10-tvbox.dtb \
-	sun4i-a10-chuwi-v7-cw0825.dtb \
-	sun4i-a10-cubieboard.dtb \
-	sun4i-a10-dserve-dsrv9703c.dtb \
-	sun4i-a10-gemei-g9.dtb \
-	sun4i-a10-hackberry.dtb \
-	sun4i-a10-hyundai-a7hd.dtb \
-	sun4i-a10-inet1.dtb \
-	sun4i-a10-inet97fv2.dtb \
-	sun4i-a10-inet9f-rev03.dtb \
-	sun4i-a10-itead-iteaduino-plus.dtb \
-	sun4i-a10-jesurun-q5.dtb \
-	sun4i-a10-marsboard.dtb \
-	sun4i-a10-mini-xplus.dtb \
-	sun4i-a10-mk802.dtb \
-	sun4i-a10-mk802ii.dtb \
-	sun4i-a10-olinuxino-lime.dtb \
-	sun4i-a10-pcduino.dtb \
-	sun4i-a10-pcduino2.dtb \
-	sun4i-a10-pov-protab2-ips9.dtb
-dtb-$(CONFIG_MACH_SUN5I) += \
-	sun5i-a10s-auxtek-t003.dtb \
-	sun5i-a10s-auxtek-t004.dtb \
-	sun5i-a10s-mk802.dtb \
-	sun5i-a10s-olinuxino-micro.dtb \
-	sun5i-a10s-r7-tv-dongle.dtb \
-	sun5i-a10s-wobo-i5.dtb \
-	sun5i-a13-difrnce-dit4350.dtb \
-	sun5i-a13-empire-electronix-d709.dtb \
-	sun5i-a13-empire-electronix-m712.dtb \
-	sun5i-a13-hsg-h702.dtb \
-	sun5i-a13-inet-98v-rev2.dtb \
-	sun5i-a13-licheepi-one.dtb \
-	sun5i-a13-olinuxino.dtb \
-	sun5i-a13-olinuxino-micro.dtb \
-	sun5i-a13-q8-tablet.dtb \
-	sun5i-a13-utoo-p66.dtb \
-	sun5i-gr8-chip-pro.dtb \
-	sun5i-gr8-evb.dtb \
-	sun5i-r8-chip.dtb
-dtb-$(CONFIG_MACH_SUN6I) += \
-	sun6i-a31-app4-evb1.dtb \
-	sun6i-a31-colombus.dtb \
-	sun6i-a31-hummingbird.dtb \
-	sun6i-a31-i7.dtb \
-	sun6i-a31-m9.dtb \
-	sun6i-a31-mele-a1000g-quad.dtb \
-	sun6i-a31s-colorfly-e708-q1.dtb \
-	sun6i-a31s-cs908.dtb \
-	sun6i-a31s-inet-q972.dtb \
-	sun6i-a31s-primo81.dtb \
-	sun6i-a31s-sina31s.dtb \
-	sun6i-a31s-sinovoip-bpi-m2.dtb \
-	sun6i-a31s-yones-toptech-bs1078-v2.dtb
-dtb-$(CONFIG_MACH_SUN7I) += \
-	sun7i-a20-bananapi.dtb \
-	sun7i-a20-bananapi-m1-plus.dtb \
-	sun7i-a20-bananapro.dtb \
-	sun7i-a20-cubieboard2.dtb \
-	sun7i-a20-cubietruck.dtb \
-	sun7i-a20-hummingbird.dtb \
-	sun7i-a20-itead-ibox.dtb \
-	sun7i-a20-i12-tvbox.dtb \
-	sun7i-a20-icnova-swac.dtb \
-	sun7i-a20-lamobo-r1.dtb \
-	sun7i-a20-m3.dtb \
-	sun7i-a20-mk808c.dtb \
-	sun7i-a20-olimex-som-evb.dtb \
-	sun7i-a20-olimex-som-evb-emmc.dtb \
-	sun7i-a20-olimex-som204-evb.dtb \
-	sun7i-a20-olimex-som204-evb-emmc.dtb \
-	sun7i-a20-olinuxino-lime.dtb \
-	sun7i-a20-olinuxino-lime2.dtb \
-	sun7i-a20-olinuxino-lime2-emmc.dtb \
-	sun7i-a20-olinuxino-micro.dtb \
-	sun7i-a20-olinuxino-micro-emmc.dtb \
-	sun7i-a20-orangepi.dtb \
-	sun7i-a20-orangepi-mini.dtb \
-	sun7i-a20-pcduino3.dtb \
-	sun7i-a20-pcduino3-nano.dtb \
-	sun7i-a20-wexler-tab7200.dtb \
-	sun7i-a20-wits-pro-a20-dkt.dtb
-dtb-$(CONFIG_MACH_SUN8I) += \
-	sun8i-a23-evb.dtb \
-	sun8i-a23-gt90h-v4.dtb \
-	sun8i-a23-inet86dz.dtb \
-	sun8i-a23-ippo-q8h-v5.dtb \
-	sun8i-a23-ippo-q8h-v1.2.dtb \
-	sun8i-a23-polaroid-mid2407pxe03.dtb \
-	sun8i-a23-polaroid-mid2809pxe04.dtb \
-	sun8i-a23-q8-tablet.dtb \
-	sun8i-a33-et-q8-v1.6.dtb \
-	sun8i-a33-ga10h-v1.1.dtb \
-	sun8i-a33-inet-d978-rev2.dtb \
-	sun8i-a33-ippo-q8h-v1.2.dtb \
-	sun8i-a33-olinuxino.dtb \
-	sun8i-a33-q8-tablet.dtb \
-	sun8i-a33-sinlinx-sina33.dtb \
-	sun8i-a83t-allwinner-h8homlet-v2.dtb \
-	sun8i-a83t-bananapi-m3.dtb \
-	sun8i-a83t-cubietruck-plus.dtb \
-	sun8i-a83t-tbs-a711.dtb \
-	sun8i-h2-plus-bananapi-m2-zero.dtb \
-	sun8i-h2-plus-libretech-all-h3-cc.dtb \
-	sun8i-h2-plus-orangepi-r1.dtb \
-	sun8i-h2-plus-orangepi-zero.dtb \
-	sun8i-h3-bananapi-m2-plus.dtb \
-	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
-	sun8i-h3-beelink-x2.dtb \
-	sun8i-h3-libretech-all-h3-cc.dtb \
-	sun8i-h3-mapleboard-mp130.dtb \
-	sun8i-h3-nanopi-m1.dtb	\
-	sun8i-h3-nanopi-m1-plus.dtb \
-	sun8i-h3-nanopi-neo.dtb \
-	sun8i-h3-nanopi-neo-air.dtb \
-	sun8i-h3-orangepi-2.dtb \
-	sun8i-h3-orangepi-lite.dtb \
-	sun8i-h3-orangepi-one.dtb \
-	sun8i-h3-orangepi-pc.dtb \
-	sun8i-h3-orangepi-pc-plus.dtb \
-	sun8i-h3-orangepi-plus.dtb \
-	sun8i-h3-orangepi-plus2e.dtb \
-	sun8i-h3-orangepi-zero-plus2.dtb \
-	sun8i-h3-rervision-dvk.dtb \
-	sun8i-r16-bananapi-m2m.dtb \
-	sun8i-r16-nintendo-nes-classic.dtb \
-	sun8i-r16-nintendo-super-nes-classic.dtb \
-	sun8i-r16-parrot.dtb \
-	sun8i-r40-bananapi-m2-ultra.dtb \
-	sun8i-s3-lichee-zero-plus.dtb \
-	sun8i-t3-cqa3t-bv3.dtb \
-	sun8i-v3s-licheepi-zero.dtb \
-	sun8i-v3s-licheepi-zero-dock.dtb \
-	sun8i-v40-bananapi-m2-berry.dtb
-dtb-$(CONFIG_MACH_SUN9I) += \
-	sun9i-a80-optimus.dtb \
-	sun9i-a80-cubieboard4.dtb
-dtb-$(CONFIG_MACH_SUNIV) += \
-	suniv-f1c100s-licheepi-nano.dtb
-dtb-$(CONFIG_ARCH_TANGO) += \
-	tango4-vantage-1172.dtb
-dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
-	tegra20-harmony.dtb \
-	tegra20-colibri-eval-v3.dtb \
-	tegra20-colibri-iris.dtb \
-	tegra20-medcom-wide.dtb \
-	tegra20-paz00.dtb \
-	tegra20-plutux.dtb \
-	tegra20-seaboard.dtb \
-	tegra20-tec.dtb \
-	tegra20-trimslice.dtb \
-	tegra20-ventana.dtb
-dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
-	tegra30-apalis-eval.dtb \
-	tegra30-apalis-v1.1-eval.dtb \
-	tegra30-beaver.dtb \
-	tegra30-cardhu-a02.dtb \
-	tegra30-cardhu-a04.dtb \
-	tegra30-colibri-eval-v3.dtb
-dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
-	tegra114-dalmore.dtb \
-	tegra114-roth.dtb \
-	tegra114-tn7.dtb
-dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
-	tegra124-apalis-eval.dtb \
-	tegra124-apalis-v1.2-eval.dtb \
-	tegra124-jetson-tk1.dtb \
-	tegra124-nyan-big.dtb \
-	tegra124-nyan-blaze.dtb \
-	tegra124-venice2.dtb
-dtb-$(CONFIG_ARCH_U300) += \
-	ste-u300.dtb
-dtb-$(CONFIG_ARCH_U8500) += \
-	ste-snowball.dtb \
-	ste-hrefprev60-stuib.dtb \
-	ste-hrefprev60-tvk.dtb \
-	ste-hrefv60plus-stuib.dtb \
-	ste-hrefv60plus-tvk.dtb
-dtb-$(CONFIG_ARCH_UNIPHIER) += \
-	uniphier-ld4-ref.dtb \
-	uniphier-ld6b-ref.dtb \
-	uniphier-pro4-ace.dtb \
-	uniphier-pro4-ref.dtb \
-	uniphier-pro4-sanji.dtb \
-	uniphier-pxs2-gentil.dtb \
-	uniphier-pxs2-vodka.dtb \
-	uniphier-sld8-ref.dtb
-dtb-$(CONFIG_ARCH_VERSATILE) += \
-	versatile-ab.dtb \
-	versatile-ab-ib2.dtb \
-	versatile-pb.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += \
-	vexpress-v2p-ca5s.dtb \
-	vexpress-v2p-ca9.dtb \
-	vexpress-v2p-ca15-tc1.dtb \
-	vexpress-v2p-ca15_a7.dtb
-dtb-$(CONFIG_ARCH_VIRT) += \
-	xenvm-4.2.dtb
-dtb-$(CONFIG_ARCH_VT8500) += \
-	vt8500-bv07.dtb \
-	wm8505-ref.dtb \
-	wm8650-mid.dtb \
-	wm8750-apc8750.dtb \
-	wm8850-w70v2.dtb
-dtb-$(CONFIG_ARCH_ZYNQ) += \
-	zynq-cc108.dtb \
-	zynq-microzed.dtb \
-	zynq-parallella.dtb \
-	zynq-zc702.dtb \
-	zynq-zc706.dtb \
-	zynq-zc770-xm010.dtb \
-	zynq-zc770-xm011.dtb \
-	zynq-zc770-xm012.dtb \
-	zynq-zc770-xm013.dtb \
-	zynq-zed.dtb \
-	zynq-zturn.dtb \
-	zynq-zybo.dtb \
-	zynq-zybo-z7.dtb
-dtb-$(CONFIG_MACH_ARMADA_370) += \
-	armada-370-db.dtb \
-	armada-370-dlink-dns327l.dtb \
-	armada-370-mirabox.dtb \
-	armada-370-netgear-rn102.dtb \
-	armada-370-netgear-rn104.dtb \
-	armada-370-rd.dtb \
-	armada-370-seagate-nas-2bay.dtb \
-	armada-370-seagate-nas-4bay.dtb \
-	armada-370-seagate-personal-cloud.dtb \
-	armada-370-seagate-personal-cloud-2bay.dtb \
-	armada-370-synology-ds213j.dtb
-dtb-$(CONFIG_MACH_ARMADA_375) += \
-	armada-375-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_38X) += \
-	armada-385-db-88f6820-amc.dtb \
-	armada-385-db-ap.dtb \
-	armada-385-linksys-caiman.dtb \
-	armada-385-linksys-cobra.dtb \
-	armada-385-linksys-rango.dtb \
-	armada-385-linksys-shelby.dtb \
-	armada-385-synology-ds116.dtb \
-	armada-385-turris-omnia.dtb \
-	armada-388-clearfog.dtb \
-	armada-388-clearfog-base.dtb \
-	armada-388-clearfog-pro.dtb \
-	armada-388-db.dtb \
-	armada-388-gp.dtb \
-	armada-388-helios4.dtb \
-	armada-388-rd.dtb
-dtb-$(CONFIG_MACH_ARMADA_39X) += \
-	armada-398-db.dtb
-dtb-$(CONFIG_MACH_ARMADA_XP) += \
-	armada-xp-axpwifiap.dtb \
-	armada-xp-db.dtb \
-	armada-xp-db-dxbc2.dtb \
-	armada-xp-db-xc3-24g4xg.dtb \
-	armada-xp-gp.dtb \
-	armada-xp-lenovo-ix4-300d.dtb \
-	armada-xp-linksys-mamba.dtb \
-	armada-xp-matrix.dtb \
-	armada-xp-netgear-rn2120.dtb \
-	armada-xp-openblocks-ax3-4.dtb \
-	armada-xp-synology-ds414.dtb
-dtb-$(CONFIG_MACH_DOVE) += \
-	dove-cubox.dtb \
-	dove-cubox-es.dtb \
-	dove-d2plug.dtb \
-	dove-d3plug.dtb \
-	dove-dove-db.dtb \
-	dove-sbc-a510.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += \
-	mt2701-evb.dtb \
-	mt6580-evbp1.dtb \
-	mt6589-aquaris5.dtb \
-	mt6592-evb.dtb \
-	mt7623a-rfb-emmc.dtb \
-	mt7623a-rfb-nand.dtb \
-	mt7623n-rfb-emmc.dtb \
-	mt7623n-bananapi-bpi-r2.dtb \
-	mt7629-rfb.dtb \
-	mt8127-moose.dtb \
-	mt8135-evbp1.dtb
-dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
-dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
-dtb-$(CONFIG_ARCH_ASPEED) += \
-	aspeed-ast2500-evb.dtb \
-	aspeed-ast2600-evb.dtb \
-	aspeed-bmc-arm-centriq2400-rep.dtb \
-	aspeed-bmc-arm-stardragon4800-rep2.dtb \
-	aspeed-bmc-facebook-cmm.dtb \
-	aspeed-bmc-facebook-minipack.dtb \
-	aspeed-bmc-facebook-tiogapass.dtb \
-	aspeed-bmc-facebook-wedge40.dtb \
-	aspeed-bmc-facebook-wedge100.dtb \
-	aspeed-bmc-facebook-yamp.dtb \
-	aspeed-bmc-intel-s2600wf.dtb \
-	aspeed-bmc-inspur-fp5280g2.dtb \
-	aspeed-bmc-lenovo-hr630.dtb \
-	aspeed-bmc-lenovo-hr855xg2.dtb \
-	aspeed-bmc-microsoft-olympus.dtb \
-	aspeed-bmc-opp-lanyang.dtb \
-	aspeed-bmc-opp-mihawk.dtb \
-	aspeed-bmc-opp-palmetto.dtb \
-	aspeed-bmc-opp-romulus.dtb \
-	aspeed-bmc-opp-swift.dtb \
-	aspeed-bmc-opp-vesnin.dtb \
-	aspeed-bmc-opp-witherspoon.dtb \
-	aspeed-bmc-opp-zaius.dtb \
-	aspeed-bmc-portwell-neptune.dtb \
-	aspeed-bmc-quanta-q71l.dtb
+subdir-y += actions
+subdir-y += airoha
+subdir-y += allwinner
+subdir-y += alphascale
+subdir-y += amazon
+subdir-y += amlogic
+subdir-y += arm
+subdir-y += aspeed
+subdir-y += axis
+subdir-y += broadcom
+subdir-y += calxeda
+subdir-y += cirrus
+subdir-y += cnxt
+subdir-y += gemini
+subdir-y += hisilicon
+subdir-y += hpe
+subdir-y += intel
+subdir-y += marvell
+subdir-y += mediatek
+subdir-y += microchip
+subdir-y += moxa
+subdir-y += nspire
+subdir-y += nuvoton
+subdir-y += nvidia
+subdir-y += nxp
+subdir-y += qcom
+subdir-y += realtek
+subdir-y += renesas
+subdir-y += rockchip
+subdir-y += samsung
+subdir-y += sigmastar
+subdir-y += socionext
+subdir-y += st
+subdir-y += sunplus
+subdir-y += synaptics
+subdir-y += ti
+subdir-y += unisoc
+subdir-y += vt8500
+subdir-y += xen
+subdir-y += xilinx
diff --git a/arch/arm/boot/dts/actions/Makefile b/arch/arm/boot/dts/actions/Makefile
new file mode 100644
index 000000000000..f384e4a48e6f
--- /dev/null
+++ b/arch/arm/boot/dts/actions/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ACTIONS) += \
+	owl-s500-cubieboard6.dtb \
+	owl-s500-guitar-bb-rev-b.dtb \
+	owl-s500-labrador-base-m.dtb \
+	owl-s500-roseapplepi.dtb \
+	owl-s500-sparky.dtb
diff --git a/arch/arm/boot/dts/owl-s500-cubieboard6.dts b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
index 7c96c59b610d..c2b02895910c 100644
--- a/arch/arm/boot/dts/owl-s500-cubieboard6.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-cubieboard6.dts
@@ -25,12 +25,6 @@
 		device_type = "memory";
 		reg = <0x0 0x80000000>;
 	};
-
-	uart3_clk: uart3-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <921600>;
-		#clock-cells = <0>;
-	};
 };
 
 &timer {
@@ -39,5 +33,4 @@
 
 &uart3 {
 	status = "okay";
-	clocks = <&uart3_clk>;
 };
diff --git a/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
new file mode 100644
index 000000000000..7ae34a23e320
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar-bb-rev-b.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "owl-s500-guitar.dtsi"
+
+/ {
+	compatible = "lemaker,guitar-bb-rev-b", "lemaker,guitar", "actions,s500";
+	model = "LeMaker Guitar Base Board rev. B";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/owl-s500-guitar.dtsi b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
index 81cc39871f17..81cc39871f17 100644
--- a/arch/arm/boot/dts/owl-s500-guitar.dtsi
+++ b/arch/arm/boot/dts/actions/owl-s500-guitar.dtsi
diff --git a/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
new file mode 100644
index 000000000000..1585e33f703b
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-base-m.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador Base Board
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+/dts-v1/;
+
+#include "owl-s500-labrador-v2.dtsi"
+
+/ {
+	model = "Caninos Labrador Core v2 on Labrador Base-M v1";
+	compatible = "caninos,labrador-base-m",
+		     "caninos,labrador-v2", "actions,s500";
+
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
new file mode 100644
index 000000000000..883ff2f9886d
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-labrador-v2.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Caninos Labrador SoM V2
+ *
+ * Copyright (c) 2019-2020 Matheus Castello
+ */
+
+#include "owl-s500.dtsi"
+
+/ {
+	model = "Caninos Labrador Core V2.1";
+	compatible = "caninos,labrador-v2", "actions,s500";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>;
+	};
+};
+
+&timer {
+	clocks = <&hosc>;
+};
diff --git a/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
new file mode 100644
index 000000000000..eb555f385283
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500-roseapplepi.dts
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Roseapple Pi
+ *
+ * Copyright (C) 2020-2021 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "owl-s500.dtsi"
+
+/ {
+	compatible = "roseapplepi,roseapplepi", "actions,s500";
+	model = "Roseapple Pi";
+
+	aliases {
+		mmc0 = &mmc0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+
+	syspwr: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SYSPWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	atc260x: pmic@65 {
+		compatible = "actions,atc2603c";
+		reg = <0x65>;
+		interrupt-parent = <&sirq>;
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+		reset-time-sec = <6>;
+
+		regulators {
+			compatible = "actions,atc2603c-regulator";
+
+			dcdc1-supply = <&syspwr>;
+			dcdc2-supply = <&syspwr>;
+			dcdc3-supply = <&syspwr>;
+			ldo1-supply = <&syspwr>;
+			ldo2-supply = <&syspwr>;
+			ldo3-supply = <&syspwr>;
+			ldo5-supply = <&syspwr>;
+			ldo6-supply = <&syspwr>;
+			ldo7-supply = <&syspwr>;
+			ldo8-supply = <&syspwr>;
+			ldo11-supply = <&syspwr>;
+			ldo12-supply = <&syspwr>;
+			switchldo1-supply = <&vcc>;
+
+			vdd_cpu: dcdc1 {
+				regulator-name = "VDD_CPU";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			vddq: dcdc2 {
+				regulator-name = "VDDQ";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <2150000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vcc: dcdc3 {
+				regulator-name = "VCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_3v3: ldo1 {
+				regulator-name = "VCC_3V3";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			avcc: ldo2 {
+				regulator-name = "AVCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_1v8: ldo3 {
+				regulator-name = "VDD_1V8";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vcc_3v1: ldo5 {
+				regulator-name = "VCC_3V1";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			avdd: ldo6 {
+				regulator-name = "AVDD";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			sens_1v8: ldo7 {
+				regulator-name = "SENS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8: ldo8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			svcc: ldo11 {
+				regulator-name = "SVCC";
+				regulator-min-microvolt = <2600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			rtc_vdd: ldo12 {
+				regulator-name = "RTC_VDD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			sd_vcc: switchldo1 {
+				regulator-name = "SD_VCC";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&pinctrl {
+	i2c0_pins: i2c0-pins {
+		pinmux {
+			groups = "i2c0_mfp";
+			function = "i2c0";
+		};
+
+		pinconf {
+			pins = "i2c0_sclk", "i2c0_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinconf {
+			pins = "i2c1_sclk", "i2c1_sdata";
+			bias-pull-up;
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinconf {
+			pins = "i2c2_sclk", "i2c2_sdata";
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins: mmc0-pins {
+		pinmux {
+			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+				 "sd0_cmd_mfp", "sd0_clk_mfp";
+			function = "sd0";
+		};
+
+		drv-pinconf {
+			groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
+			drive-strength = <8>;
+		};
+
+		bias0-pinconf {
+			pins = "sd0_d0", "sd0_d1", "sd0_d2",
+			       "sd0_d3", "sd0_cmd";
+			bias-pull-up;
+		};
+
+		bias1-pinconf {
+			pins = "sd0_clk";
+			bias-pull-down;
+		};
+	};
+
+	ethernet_pins: ethernet-pins {
+		eth_rmii-pinmux {
+			groups = "rmii_txd0_mfp", "rmii_txd1_mfp",
+				 "rmii_rxd0_mfp", "rmii_rxd1_mfp",
+				 "rmii_txen_mfp", "rmii_rxen_mfp",
+				 "rmii_crs_dv_mfp", "rmii_ref_clk_mfp";
+			function = "eth_rmii";
+		};
+
+		phy_clk-pinmux {
+			groups = "clko_25m_mfp";
+			function = "clko_25m";
+		};
+
+		ref_clk-pinconf {
+			groups = "rmii_ref_clk_drv";
+			drive-strength = <2>;
+		};
+
+	};
+};
+
+/* uSD */
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	no-sdio;
+	no-mmc;
+	no-1-8-v;
+	cd-gpios = <&pinctrl 117 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&sd_vcc>;
+	vqmmc-supply = <&sd_vcc>;
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	phy-mode = "rmii";
+	phy-handle = <&eth_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&pinctrl 88 GPIO_ACTIVE_LOW>; /* GPIOC24 */
+		reset-delay-us = <10000>;
+		reset-post-delay-us = <150000>;
+
+		eth_phy: ethernet-phy@3 {
+			reg = <0x3>;
+			max-speed = <100>;
+			interrupt-parent = <&sirq>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&twd_timer {
+	status = "okay";
+};
+
+&timer {
+	clocks = <&hosc>;
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/owl-s500-sparky.dts b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
index c665ce8b88b4..9d8f7336bec0 100644
--- a/arch/arm/boot/dts/owl-s500-sparky.dts
+++ b/arch/arm/boot/dts/actions/owl-s500-sparky.dts
@@ -25,12 +25,6 @@
 		device_type = "memory";
 		reg = <0x0 0x40000000>; /* 1 or 2 GiB */
 	};
-
-	uart3_clk: uart3-clk {
-		compatible = "fixed-clock";
-		clock-frequency = <921600>;
-		#clock-cells = <0>;
-	};
 };
 
 &timer {
@@ -39,5 +33,4 @@
 
 &uart3 {
 	status = "okay";
-	clocks = <&uart3_clk>;
 };
diff --git a/arch/arm/boot/dts/actions/owl-s500.dtsi b/arch/arm/boot/dts/actions/owl-s500.dtsi
new file mode 100644
index 000000000000..739b4b9cec8c
--- /dev/null
+++ b/arch/arm/boot/dts/actions/owl-s500.dtsi
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Actions Semi S500 SoC
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ */
+
+#include <dt-bindings/clock/actions,s500-cmu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/owl-s500-powergate.h>
+#include <dt-bindings/reset/actions,s500-reset.h>
+
+/ {
+	compatible = "actions,s500";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+	};
+
+	chosen {
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x1>;
+			enable-method = "actions,s500-smp";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x2>;
+			enable-method = "actions,s500-smp";
+			power-domains = <&sps S500_PD_CPU2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x3>;
+			enable-method = "actions,s500-smp";
+			power-domains = <&sps S500_PD_CPU3>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	hosc: hosc {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	losc: losc {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		scu: scu@b0020000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xb0020000 0x100>;
+		};
+
+		global_timer: timer@b0020200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xb0020200 0x100>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_timer: timer@b0020600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0xb0020600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		twd_wdt: wdt@b0020620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xb0020620 0xe0>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@b0021000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0xb0021000 0x1000>,
+			      <0xb0020100 0x0100>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		l2: cache-controller@b0022000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0022000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			arm,tag-latency = <3 3 2>;
+			arm,data-latency = <5 3 3>;
+		};
+
+		uart0: serial@b0120000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0120000 0x2000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@b0122000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0122000 0x2000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@b0124000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0124000 0x2000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@b0126000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0126000 0x2000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@b0128000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb0128000 0x2000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@b012a000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012a000 0x2000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@b012c000 {
+			compatible = "actions,s500-uart", "actions,owl-uart";
+			reg = <0xb012c000 0x2000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART6>;
+			status = "disabled";
+		};
+
+		cmu: clock-controller@b0160000 {
+			compatible = "actions,s500-cmu";
+			reg = <0xb0160000 0x8000>;
+			clocks = <&hosc>, <&losc>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@b0170000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0170000 0x4000>;
+			clocks = <&cmu CLK_I2C0>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@b0174000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0174000 0x4000>;
+			clocks = <&cmu CLK_I2C1>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@b0178000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb0178000 0x4000>;
+			clocks = <&cmu CLK_I2C2>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@b017c000 {
+			compatible = "actions,s500-i2c";
+			reg = <0xb017c000 0x4000>;
+			clocks = <&cmu CLK_I2C3>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		sirq: interrupt-controller@b01b0200 {
+			compatible = "actions,s500-sirq";
+			reg = <0xb01b0200 0x4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ0 */
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, /* SIRQ1 */
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; /* SIRQ2 */
+		};
+
+		timer: timer@b0168000 {
+			compatible = "actions,s500-timer";
+			reg = <0xb0168000 0x8000>;
+			interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			             <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "2hz0", "2hz1", "timer0", "timer1";
+		};
+
+		sps: power-controller@b01b0100 {
+			compatible = "actions,s500-sps";
+			reg = <0xb01b0100 0x100>;
+			#power-domain-cells = <1>;
+		};
+
+		pinctrl: pinctrl@b01b0000 {
+			compatible = "actions,s500-pinctrl";
+			reg = <0xb01b0000 0x40>, /* GPIO */
+			      <0xb01b0040 0x10>, /* Multiplexing Control */
+			      <0xb01b0060 0x18>, /* PAD Control */
+			      <0xb01b0080 0xc>;  /* PAD Drive Capacity */
+			clocks = <&cmu CLK_GPIO>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 132>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */
+		};
+
+		dma: dma-controller@b0260000 {
+			compatible = "actions,s500-dma";
+			reg = <0xb0260000 0xd00>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			dma-channels = <12>;
+			dma-requests = <46>;
+			clocks = <&cmu CLK_DMAC>;
+			power-domains = <&sps S500_PD_DMA>;
+		};
+
+		mmc0: mmc@b0230000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0230000 0x38>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD0>;
+			resets = <&cmu RESET_SD0>;
+			dmas = <&dma 2>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc1: mmc@b0234000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0234000 0x38>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD1>;
+			resets = <&cmu RESET_SD1>;
+			dmas = <&dma 3>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		mmc2: mmc@b0238000 {
+			compatible = "actions,s500-mmc", "actions,owl-mmc";
+			reg = <0xb0238000 0x38>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SD2>;
+			resets = <&cmu RESET_SD2>;
+			dmas = <&dma 4>;
+			dma-names = "mmc";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@b0310000 {
+			compatible = "actions,s500-emac", "actions,owl-emac";
+			reg = <0xb0310000 0x10000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_ETHERNET>, <&cmu CLK_RMII_REF>;
+			clock-names = "eth", "rmii";
+			resets = <&cmu RESET_ETHERNET>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/airoha/Makefile b/arch/arm/boot/dts/airoha/Makefile
new file mode 100644
index 000000000000..00c31389f622
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
diff --git a/arch/arm/boot/dts/airoha/en7523-evb.dts b/arch/arm/boot/dts/airoha/en7523-evb.dts
new file mode 100644
index 000000000000..f23a25cce119
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/en7523-evb.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/airoha/en7523.dtsi b/arch/arm/boot/dts/airoha/en7523.dtsi
new file mode 100644
index 000000000000..b523a868c4ad
--- /dev/null
+++ b/arch/arm/boot/dts/airoha/en7523.dtsi
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	scu: system-controller@1fa20000 {
+		compatible = "airoha,en7523-scu";
+		reg = <0x1fa20000 0x400>,
+		      <0x1fb00000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcie0: pcie@1fa91000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa91000 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1fa92000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa92000 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
new file mode 100644
index 000000000000..f71392a55df8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/Makefile
@@ -0,0 +1,283 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN4I) += \
+	sun4i-a10-a1000.dtb \
+	sun4i-a10-ba10-tvbox.dtb \
+	sun4i-a10-chuwi-v7-cw0825.dtb \
+	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
+	sun4i-a10-jesurun-q5.dtb \
+	sun4i-a10-marsboard.dtb \
+	sun4i-a10-mini-xplus.dtb \
+	sun4i-a10-mk802.dtb \
+	sun4i-a10-mk802ii.dtb \
+	sun4i-a10-olinuxino-lime.dtb \
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-pocketbook-614-plus.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
+	sun5i-a10s-auxtek-t004.dtb \
+	sun5i-a10s-mk802.dtb \
+	sun5i-a10s-olinuxino-micro.dtb \
+	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
+	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
+	sun5i-a13-olinuxino.dtb \
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN6I) += \
+	sun6i-a31-app4-evb1.dtb \
+	sun6i-a31-colombus.dtb \
+	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
+	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+dtb-$(CONFIG_MACH_SUN7I) += \
+	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
+	sun7i-a20-bananapro.dtb \
+	sun7i-a20-cubieboard2.dtb \
+	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
+	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
+	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-a20-adb4006.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
+	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
+	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
+	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
+	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
+
+# Enables support for device-tree overlays for all pis
+DTC_FLAGS_sun8i-h2-plus-orangepi-zero := -@
+DTC_FLAGS_sun8i-h3-orangepi-lite := -@
+DTC_FLAGS_sun8i-h3-bananapi-m2-plus := -@
+DTC_FLAGS_sun8i-h3-nanopi-m1-plus := -@
+DTC_FLAGS_sun8i-h3-nanopi-m1 := -@
+DTC_FLAGS_sun8i-h3-nanopi-duo2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-plus2e := -@
+DTC_FLAGS_sun8i-h3-orangepi-one := -@
+DTC_FLAGS_sun8i-h3-orangepi-plus := -@
+DTC_FLAGS_sun8i-h3-orangepi-2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-zero-plus2 := -@
+DTC_FLAGS_sun8i-h3-nanopi-neo-air := -@
+DTC_FLAGS_sun8i-h3-zeropi := -@
+DTC_FLAGS_sun8i-h3-nanopi-neo := -@
+DTC_FLAGS_sun8i-h3-nanopi-r1 := -@
+DTC_FLAGS_sun8i-h3-orangepi-pc := -@
+DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@
+DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@
+DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@
+DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@
+dtb-$(CONFIG_MACH_SUN8I) += \
+	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
+	sun8i-a23-inet86dz.dtb \
+	sun8i-a23-ippo-q8h-v5.dtb \
+	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
+	sun8i-a23-polaroid-mid2809pxe04.dtb \
+	sun8i-a23-q8-tablet.dtb \
+	sun8i-a33-et-q8-v1.6.dtb \
+	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-inet-d978-rev2.dtb \
+	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-olinuxino.dtb \
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a33-vstar.dtb \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-bananapi-m3.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-a83t-tbs-a711.dtb \
+	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
+	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h2-plus-orangepi-zero-interface-board.dtb \
+	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+	sun8i-h3-beelink-x2.dtb \
+	sun8i-h3-libretech-all-h3-cc.dtb \
+	sun8i-h3-mapleboard-mp130.dtb \
+	sun8i-h3-nanopi-duo2.dtb \
+	sun8i-h3-nanopi-m1.dtb \
+	sun8i-h3-nanopi-m1-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
+	sun8i-h3-nanopi-r1.dtb \
+	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
+	sun8i-h3-orangepi-one.dtb \
+	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
+	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-orangepi-zero-plus2-interface-board.dtb \
+	sun8i-h3-rervision-dvk.dtb \
+	sun8i-h3-zeropi.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+	sun8i-r16-bananapi-m2m.dtb \
+	sun8i-r16-nintendo-nes-classic.dtb \
+	sun8i-r16-nintendo-super-nes-classic.dtb \
+	sun8i-r16-parrot.dtb \
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-r40-oka40i-c.dtb \
+	sun8i-s3-elimo-initium.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
+	sun8i-s3-pinecube.dtb \
+	sun8i-t113s-mangopi-mq-r-t113.dtb \
+	sun8i-t113s-netcube-nagami-basic-carrier.dtb \
+	sun8i-t113s-netcube-nagami-keypad-carrier.dtb \
+	sun8i-t3-cqa3t-bv3.dtb \
+	sun8i-v3-sl631-imx179.dtb \
+	sun8i-v3s-anbernic-rg-nano.dtb \
+	sun8i-v3s-licheepi-zero.dtb \
+	sun8i-v3s-licheepi-zero-dock.dtb \
+	sun8i-v3s-netcube-kumquat.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
+sun8i-h2-plus-orangepi-zero-interface-board-dtbs += \
+	sun8i-h2-plus-orangepi-zero.dtb sun8i-orangepi-zero-interface-board.dtbo
+sun8i-h3-orangepi-zero-plus2-interface-board-dtbs += \
+	sun8i-h3-orangepi-zero-plus2.dtb sun8i-orangepi-zero-interface-board.dtbo
+dtb-$(CONFIG_MACH_SUN9I) += \
+	sun9i-a80-optimus.dtb \
+	sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+	suniv-f1c100s-licheepi-nano.dtb \
+	suniv-f1c200s-lctech-pi.dtb \
+	suniv-f1c200s-popstick-v1.1.dtb
diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/allwinner/axp152.dtsi
index f90ad6c64a07..f90ad6c64a07 100644
--- a/arch/arm/boot/dts/axp152.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp152.dtsi
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/allwinner/axp209.dtsi
index 0d9ff12bdf28..469d0f7d5185 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp209.dtsi
@@ -48,12 +48,19 @@
  * http://dl.linux-sunxi.org/AXP/AXP209%20Datasheet%20v1.0_cn.pdf
  */
 
+/ {
+	pmic-temp {
+		compatible = "iio-hwmon";
+		io-channels = <&axp_adc 4>; /* Internal temperature */
+	};
+};
+
 &axp209 {
 	compatible = "x-powers,axp209";
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp202-ac-power-supply";
 		status = "disabled";
 	};
@@ -69,7 +76,7 @@
 		#gpio-cells = <2>;
 	};
 
-	battery_power_supply: battery-power-supply {
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp209-battery-power-supply";
 		status = "disabled";
 	};
@@ -112,7 +119,7 @@
 		};
 	};
 
-	usb_power_supply: usb-power-supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp202-usb-power-supply";
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/axp223.dtsi b/arch/arm/boot/dts/allwinner/axp223.dtsi
index b91b6c1278c7..b91b6c1278c7 100644
--- a/arch/arm/boot/dts/axp223.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp223.dtsi
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/allwinner/axp22x.dtsi
index 65a07a67aca9..f79650afd0a7 100644
--- a/arch/arm/boot/dts/axp22x.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp22x.dtsi
@@ -52,7 +52,7 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp221-ac-power-supply";
 		status = "disabled";
 	};
@@ -62,11 +62,17 @@
 		#io-channel-cells = <1>;
 	};
 
-	battery_power_supply: battery-power-supply {
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp221-battery-power-supply";
 		status = "disabled";
 	};
 
+	axp_gpio: gpio {
+		compatible = "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <3000>;
@@ -163,7 +169,7 @@
 		};
 	};
 
-	usb_power_supply: usb_power_supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp221-usb-power-supply";
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/allwinner/axp809.dtsi
index ab8e5f2d9246..d134d4c00bd8 100644
--- a/arch/arm/boot/dts/axp809.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp809.dtsi
@@ -50,4 +50,11 @@
 	compatible = "x-powers,axp809";
 	interrupt-controller;
 	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp809-gpio",
+			     "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/allwinner/axp81x.dtsi
index 1dfeeceabf4c..ebaf1c3ce8db 100644
--- a/arch/arm/boot/dts/axp81x.dtsi
+++ b/arch/arm/boot/dts/allwinner/axp81x.dtsi
@@ -48,7 +48,7 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
-	ac_power_supply: ac-power-supply {
+	ac_power_supply: ac-power {
 		compatible = "x-powers,axp813-ac-power-supply";
 		status = "disabled";
 	};
@@ -62,19 +62,9 @@
 		compatible = "x-powers,axp813-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
-
-		gpio0_ldo: gpio0-ldo {
-			pins = "GPIO0";
-			function = "ldo";
-		};
-
-		gpio1_ldo: gpio1-ldo {
-			pins = "GPIO1";
-			function = "ldo";
-		};
 	};
 
-	battery_power_supply: battery-power-supply {
+	battery_power_supply: battery-power {
 		compatible = "x-powers,axp813-battery-power-supply";
 		status = "disabled";
 	};
@@ -144,15 +134,11 @@
 		};
 
 		reg_ldo_io0: ldo-io0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
 
 		reg_ldo_io1: ldo-io1 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio1_ldo>;
 			/* Disable by default to avoid conflicts with GPIO */
 			status = "disabled";
 		};
@@ -172,7 +158,7 @@
 		};
 	};
 
-	usb_power_supply: usb-power-supply {
+	usb_power_supply: usb-power {
 		compatible = "x-powers,axp813-usb-power-supply";
 	};
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
index 8692b11a83c3..20f9ed244851 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-a1000.dts
@@ -60,15 +60,26 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-0 {
 			label = "a1000:red:usr";
 			gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		blue {
+		led-1 {
 			label = "a1000:blue:pwr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -133,6 +144,20 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
index 816d534ac093..816d534ac093 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-ba10-tvbox.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
index 74262988881c..74262988881c 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-chuwi-v7-cw0825.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
index 6ca02e824acc..0645d6064235 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-cubieboard.dts
@@ -75,12 +75,12 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_cubieboard>;
 
-		blue {
+		led-0 {
 			label = "cubieboard:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */
 		};
 
-		green {
+		led-1 {
 			label = "cubieboard:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
index 8ee3ff42bd55..63e77c05bfda 100644
--- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-dserve-dsrv9703c.dts
@@ -62,6 +62,7 @@
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
index ea7a59dcf8f9..ea7a59dcf8f9 100644
--- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-gemei-g9.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
index 47dea0922501..47dea0922501 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hackberry.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
index bf2044bac42f..bf2044bac42f 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-hyundai-a7hd.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
index ca878384e902..60e432a0ef1c 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet1.dts
@@ -62,6 +62,7 @@
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
index 76016f2ca29d..76016f2ca29d 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet97fv2.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
index 0a562b2cc5bc..62e7aa587f89 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-inet9f-rev03.dts
@@ -63,7 +63,7 @@
 		compatible = "gpio-keys-polled";
 		poll-interval = <20>;
 
-		left-joystick-left {
+		event-left-joystick-left {
 			label = "Left Joystick Left";
 			linux,code = <ABS_X>;
 			linux,input-type = <EV_ABS>;
@@ -71,7 +71,7 @@
 			gpios = <&pio 0 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA6 */
 		};
 
-		left-joystick-right {
+		event-left-joystick-right {
 			label = "Left Joystick Right";
 			linux,code = <ABS_X>;
 			linux,input-type = <EV_ABS>;
@@ -79,7 +79,7 @@
 			gpios = <&pio 0 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA5 */
 		};
 
-		left-joystick-up {
+		event-left-joystick-up {
 			label = "Left Joystick Up";
 			linux,code = <ABS_Y>;
 			linux,input-type = <EV_ABS>;
@@ -87,7 +87,7 @@
 			gpios = <&pio 0 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA8 */
 		};
 
-		left-joystick-down {
+		event-left-joystick-down {
 			label = "Left Joystick Down";
 			linux,code = <ABS_Y>;
 			linux,input-type = <EV_ABS>;
@@ -95,7 +95,7 @@
 			gpios = <&pio 0 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA9 */
 		};
 
-		right-joystick-left {
+		event-right-joystick-left {
 			label = "Right Joystick Left";
 			linux,code = <ABS_Z>;
 			linux,input-type = <EV_ABS>;
@@ -103,7 +103,7 @@
 			gpios = <&pio 0 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA1 */
 		};
 
-		right-joystick-right {
+		event-right-joystick-right {
 			label = "Right Joystick Right";
 			linux,code = <ABS_Z>;
 			linux,input-type = <EV_ABS>;
@@ -111,7 +111,7 @@
 			gpios = <&pio 0 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA0 */
 		};
 
-		right-joystick-up {
+		event-right-joystick-up {
 			label = "Right Joystick Up";
 			linux,code = <ABS_RZ>;
 			linux,input-type = <EV_ABS>;
@@ -119,7 +119,7 @@
 			gpios = <&pio 0 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA3 */
 		};
 
-		right-joystick-down {
+		event-right-joystick-down {
 			label = "Right Joystick Down";
 			linux,code = <ABS_RZ>;
 			linux,input-type = <EV_ABS>;
@@ -127,7 +127,7 @@
 			gpios = <&pio 0 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA4 */
 		};
 
-		dpad-left {
+		event-dpad-left {
 			label = "DPad Left";
 			linux,code = <ABS_HAT0X>;
 			linux,input-type = <EV_ABS>;
@@ -135,7 +135,7 @@
 			gpios = <&pio 7 23 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH23 */
 		};
 
-		dpad-right {
+		event-dpad-right {
 			label = "DPad Right";
 			linux,code = <ABS_HAT0X>;
 			linux,input-type = <EV_ABS>;
@@ -143,7 +143,7 @@
 			gpios = <&pio 7 24 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH24 */
 		};
 
-		dpad-up {
+		event-dpad-up {
 			label = "DPad Up";
 			linux,code = <ABS_HAT0Y>;
 			linux,input-type = <EV_ABS>;
@@ -151,7 +151,7 @@
 			gpios = <&pio 7 25 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH25 */
 		};
 
-		dpad-down {
+		event-dpad-down {
 			label = "DPad Down";
 			linux,code = <ABS_HAT0Y>;
 			linux,input-type = <EV_ABS>;
@@ -159,49 +159,49 @@
 			gpios = <&pio 7 26 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH26 */
 		};
 
-		x {
+		event-x {
 			label = "Button X";
 			linux,code = <BTN_X>;
 			gpios = <&pio 0 16 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA16 */
 		};
 
-		y {
+		event-y {
 			label = "Button Y";
 			linux,code = <BTN_Y>;
 			gpios = <&pio 0 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA14 */
 		};
 
-		a {
+		event-a {
 			label = "Button A";
 			linux,code = <BTN_A>;
 			gpios = <&pio 0 17 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA17 */
 		};
 
-		b {
+		event-b {
 			label = "Button B";
 			linux,code = <BTN_B>;
 			gpios = <&pio 0 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA15 */
 		};
 
-		select {
+		event-select {
 			label = "Select Button";
 			linux,code = <BTN_SELECT>;
 			gpios = <&pio 0 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA11 */
 		};
 
-		start {
+		event-start {
 			label = "Start Button";
 			linux,code = <BTN_START>;
 			gpios = <&pio 0 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA12 */
 		};
 
-		top-left {
+		event-top-left {
 			label = "Top Left Button";
 			linux,code = <BTN_TL>;
 			gpios = <&pio 7 22 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PH22 */
 		};
 
-		top-right {
+		event-top-right {
 			label = "Top Right Button";
 			linux,code = <BTN_TR>;
 			gpios = <&pio 0 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PA13 */
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
index d4e319d16aae..d4e319d16aae 100644
--- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-itead-iteaduino-plus.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
index 8a7b4c53d278..1aeb0bd5519e 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-jesurun-q5.dts
@@ -63,7 +63,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "q5:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
 		};
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
index a843e57530ed..81fdb217d339 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-marsboard.dts
@@ -62,22 +62,22 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red1 {
+		led-0 {
 			label = "marsboard:red1:usr";
 			gpios = <&pio 1 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		red2 {
+		led-1 {
 			label = "marsboard:red2:usr";
 			gpios = <&pio 1 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		red3 {
+		led-2 {
 			label = "marsboard:red3:usr";
 			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		red4 {
+		led-3 {
 			label = "marsboard:red4:usr";
 			gpios = <&pio 1 8 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
index f9d74e21031d..f9d74e21031d 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mini-xplus.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
index 059fe9c5d024..059fe9c5d024 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
index 17dcdf031118..17dcdf031118 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-mk802ii.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
index 845f76824d57..d425d9ee83db 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
@@ -74,7 +74,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		green {
+		led {
 			label = "a10-olinuxino-lime:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -91,12 +91,11 @@
 	/*
 	 * The A10-Lime is known to be unstable when running at 1008 MHz
 	 */
-	operating-points = <
-		/* kHz    uV */
-		912000  1350000
-		864000  1300000
-		624000  1250000
-		>;
+	operating-points =
+		/* kHz	  uV */
+		<912000	1350000>,
+		<864000	1300000>,
+		<624000	1250000>;
 };
 
 &de {
@@ -219,7 +218,7 @@
 &usbphy {
 	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
-	usb0_vbus-supply   = <&reg_usb0_vbus>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
index 83287b6c975e..a332d61fd561 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino.dts
@@ -63,12 +63,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		tx {
+		led-0 {
 			label = "pcduino:green:tx";
 			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
 		};
 
-		rx {
+		led-1 {
 			label = "pcduino:green:rx";
 			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
 		};
@@ -77,19 +77,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
 		};
 
-		home {
+		key-home {
 			label = "Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
 		};
 
-		menu {
+		key-menu {
 			label = "Key Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
index bc4f128965ed..bc4f128965ed 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pcduino2.dts
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
index 24a3d23e1952..c32596947647 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-pov-protab2-ips9.dts
@@ -62,6 +62,7 @@
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
new file mode 100644
index 000000000000..3628f12d2521
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-topwise-a721.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Pascal Roeleven <dev@pascalroeleven.nl>
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Topwise A721";
+	compatible = "topwise,a721", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
+		power-supply = <&reg_vbat>;
+		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		brightness-levels = <0 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	panel {
+		compatible = "starry,kr070pe2t";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_power>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&tcon0_out_panel>;
+			};
+		};
+	};
+
+	reg_lcd_power: reg-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "reg-lcd-power";
+		gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+		enable-active-high;
+	};
+
+	reg_vbat: reg-vbat {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	accelerometer@4c {
+		compatible = "fsl,mma7660";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		vcc-supply = <&reg_vcc3v3>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button-761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-ph-supply = <&reg_vcc3v3>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&tcon0_out {
+	tcon0_out_panel: endpoint@0 {
+		reg = <0>;
+		remote-endpoint = <&panel_input>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
index ce823c44e98a..51a6464aab9a 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10.dtsi
@@ -115,13 +115,12 @@
 			reg = <0x0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000 1400000
-				912000	1350000
-				864000	1300000
-				624000	1250000
-				>;
+				<1008000 1400000>,
+				<912000	1350000>,
+				<864000	1300000>,
+				<624000	1250000>;
 			#cooling-cells = <2>;
 		};
 	};
@@ -143,7 +142,7 @@
 			trips {
 				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
-					temperature = <850000>;
+					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
@@ -198,7 +197,7 @@
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};
@@ -520,6 +519,7 @@
 			interrupts = <39>;
 			clocks = <&ccu CLK_AHB_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -529,6 +529,7 @@
 			interrupts = <64>;
 			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -608,6 +609,7 @@
 			interrupts = <40>;
 			clocks = <&ccu CLK_AHB_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -617,6 +619,17 @@
 			interrupts = <65>;
 			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
 			status = "disabled";
 		};
 
@@ -666,6 +679,31 @@
 				function = "can";
 			};
 
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
 			emac_pins: emac0-pins {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
index 64d50fcfcd3a..04b0e6d28769 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t003.dts
@@ -62,7 +62,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_t003>;
 
-		red {
+		led {
 			label = "t003-tv-dongle:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 			default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
index 8af0eae2ddc1..667bc2dc1ea9 100644
--- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-auxtek-t004.dts
@@ -62,7 +62,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_t004>;
 
-		red {
+		led {
 			label = "t004-tv-dongle:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 			default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
index 6e90ccb267aa..d0219404c231 100644
--- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-mk802.dts
@@ -60,7 +60,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led {
 			label = "mk802:red:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
 		};
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
index 7033a123c9a3..5832bb31fc51 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-olinuxino-micro.dts
@@ -79,7 +79,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		green {
+		led {
 			label = "a10s-olinuxino-micro:green:usr";
 			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -130,7 +130,7 @@
 &i2c1 {
 	status = "okay";
 
-	at24@50 {
+	eeprom@50 {
 		compatible = "atmel,24c16";
 		pagesize = <16>;
 		reg = <0x50>;
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
index b2a49a216ebf..964360f0610a 100644
--- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-r7-tv-dongle.dts
@@ -63,7 +63,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_r7>;
 
-		green {
+		led {
 			label = "r7-tv-dongle:green:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
index 1f74ba1634cc..ef8baa992687 100644
--- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s-wobo-i5.dts
@@ -62,7 +62,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "a10s-wobo-i5:blue:usr";
 			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
index 09c486b608b2..09c486b608b2 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-a10s.dtsi
diff --git a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
index 894c4c4f9a1f..894c4c4f9a1f 100644
--- a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-difrnce-dit4350.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
index a23bf24792ec..d059388d7252 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-d709.dts
@@ -61,6 +61,7 @@
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
 		/* TODO: backlight uses axp gpio1 as enable pin */
 	};
 
diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
index b1e2afd9de52..b1e2afd9de52 100644
--- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-empire-electronix-m712.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
index 9b9f2a574851..9b9f2a574851 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-hsg-h702.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
index 439ae3b537df..439ae3b537df 100644
--- a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-inet-98v-rev2.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
index ba8d75b3c716..3a6c4bd0a44f 100644
--- a/arch/arm/boot/dts/sun5i-a13-licheepi-one.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-licheepi-one.dts
@@ -66,19 +66,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
-			label ="licheepi:red:usr";
+		led-0 {
+			label = "licheepi:red:usr";
 			gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
 		};
 
-		green {
-			label ="licheepi:green:usr";
+		led-1 {
+			label = "licheepi:green:usr";
 			gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 		};
 
-		blue {
-			label ="licheepi:blue:usr";
+		led-2 {
+			label = "licheepi:blue:usr";
 			gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
 		};
 
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
index 5df398d77238..bfe1075e62cc 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino-micro.dts
@@ -64,7 +64,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinom>;
 
-		power {
+		led {
 			label = "a13-olinuxino-micro:green:power";
 			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
index 39101228a755..fadeae3cd8bb 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-olinuxino.dts
@@ -66,7 +66,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		power {
+		led {
 			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts
new file mode 100644
index 000000000000..ab8d138dc11d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-614-plus.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 Denis Burkov <hitechshell@mail.ru>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "PocketBook 614 Plus";
+	compatible = "pocketbook,614-plus", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			linux,default-trigger = "default-on";
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "Right";
+			linux,code = <KEY_NEXT>;
+			gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		};
+
+		key-1 {
+			label = "Left";
+			linux,code = <KEY_PREVIOUS>;
+			gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
+		};
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-300 {
+		label = "Down";
+		linux,code = <KEY_DOWN>;
+		channel = <0>;
+		voltage = <300000>;
+	};
+
+	button-700 {
+		label = "Up";
+		linux,code = <KEY_UP>;
+		channel = <0>;
+		voltage = <700000>;
+	};
+
+	button-1000 {
+		label = "Left";
+		linux,code = <KEY_LEFT>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button-1200 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+
+	button-1500 {
+		label = "Right";
+		linux,code = <KEY_RIGHT>;
+		channel = <0>;
+		voltage = <1500000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+	status = "okay";
+	gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
+	usb0_vbus_det-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
new file mode 100644
index 000000000000..d60407772e5d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2019 Ondrej Jirman <megous@megous.com>
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "PocketBook Touch Lux 3";
+	compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13";
+
+	aliases {
+		serial0 = &uart1;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_vcc3v3>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		label = "GPIO Keys";
+
+		key-right {
+			label = "Right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */
+		};
+
+		key-left {
+			label = "Left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-1v8-nor-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8_nor: regulator-nor {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-nor";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+		regulator-always-on;
+	};
+
+	reg_1v8_ctp: regulator-ctp {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ctp";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v8>;
+	};
+
+	reg_3v3_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mmc0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
+		vin-supply = <&reg_vcc3v3>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* Touchpanel is connected here. */
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button-400 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_3v3_mmc0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pc_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pin>;
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+	/* We need this otherwise the LDO3 would overload */
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
+	status = "okay";
+
+	epd_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25u4033", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
index f9fc1c8b60b8..f9fc1c8b60b8 100644
--- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-q8-tablet.dts
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
index be486d28d04f..be486d28d04f 100644
--- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13-utoo-p66.dts
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
index ae04955fd9a3..2c9152b151be 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-a13.dtsi
@@ -48,7 +48,7 @@
 
 / {
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
@@ -62,14 +62,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
@@ -102,15 +102,14 @@
 
 &cpu0 {
 	clock-latency = <244144>; /* 8 32k periods */
-	operating-points = <
+	operating-points =
 		/* kHz	  uV */
-		1008000 1400000
-		912000	1350000
-		864000	1300000
-		624000	1200000
-		576000	1200000
-		432000	1200000
-		>;
+		<1008000 1400000>,
+		<912000 1350000>,
+		<864000 1300000>,
+		<624000 1200000>,
+		<576000 1200000>,
+		<432000 1200000>;
 	#cooling-cells = <2>;
 };
 
diff --git a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
index a32cde3e32eb..ffbd99c176db 100644
--- a/arch/arm/boot/dts/sun5i-gr8-chip-pro.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-chip-pro.dts
@@ -70,14 +70,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip-pro:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	mmc0_pwrseq: mmc0_pwrseq {
+	mmc0_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
 	};
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
index 4c20d731a9c6..f4fe258ef06d 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8-evb.dts
@@ -71,7 +71,7 @@
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 10000 0>;
 		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
-
+		power-supply = <&reg_vcc3v3>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 	};
diff --git a/arch/arm/boot/dts/sun5i-gr8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
index 98a8fd5e89e8..98a8fd5e89e8 100644
--- a/arch/arm/boot/dts/sun5i-gr8.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-gr8.dtsi
diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
index 4bf4943d4eb7..8c784a2c086e 100644
--- a/arch/arm/boot/dts/sun5i-r8-chip.dts
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8-chip.dts
@@ -70,14 +70,14 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "chip:white:status";
 			gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	mmc0_pwrseq: mmc0_pwrseq {
+	mmc0_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
 	};
@@ -255,6 +255,12 @@
 	pinctrl-0 = <&uart3_pg_pins>,
 		    <&uart3_cts_rts_pg_pins>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8723bs-bt";
+		device-wake-gpios = <&axp_gpio 3 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+	};
 };
 
 &usb_otg {
diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
index de35dbcd1191..de35dbcd1191 100644
--- a/arch/arm/boot/dts/sun5i-r8.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-r8.dtsi
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
index 1a9926d71410..6847f66699ac 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i-reference-design-tablet.dtsi
@@ -55,6 +55,7 @@
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */
+		power-supply = <&reg_vcc3v0>;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/allwinner/sun5i.dtsi
index cfb1efc8828c..d7c7b454a11a 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun5i.dtsi
@@ -117,7 +117,7 @@
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};
@@ -185,7 +185,9 @@
 		mbus: dram-controller@1c01000 {
 			compatible = "allwinner,sun5i-a13-mbus";
 			reg = <0x01c01000 0x1000>;
-			clocks = <&ccu 99>;
+			clocks = <&ccu CLK_MBUS>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			dma-ranges = <0x00000000 0x40000000 0x20000000>;
 			#interconnect-cells = <1>;
 		};
@@ -275,6 +277,7 @@
 			compatible = "allwinner,sun5i-a13-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <44>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
 			resets = <&ccu RST_LCD>;
 			reset-names = "lcd";
 			clocks = <&ccu CLK_AHB_LCD>,
@@ -283,7 +286,7 @@
 			clock-names = "ahb",
 				      "tcon-ch0",
 				      "tcon-ch1";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			status = "disabled";
 
@@ -391,6 +394,7 @@
 			interrupts = <39>;
 			clocks = <&ccu CLK_AHB_EHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -400,6 +404,7 @@
 			interrupts = <40>;
 			clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -512,6 +517,15 @@
 				bias-pull-up;
 			};
 
+			/omit-if-no-ref/
+			mmc2_4bit_pe_pins: mmc2-4bit-pe-pins {
+				pins = "PE4", "PE5", "PE6", "PE7",
+				       "PE8", "PE9";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
 			mmc2_8bit_pins: mmc2-8bit-pins {
 				pins = "PC6", "PC7", "PC8", "PC9",
 				       "PC10", "PC11", "PC12", "PC13",
@@ -721,6 +735,18 @@
 			#size-cells = <0>;
 		};
 
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>, <70>, <71>, <72>,  <73>;
+			interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <320000000>;
+		};
+
 		timer@1c60000 {
 			compatible = "allwinner,sun5i-a13-hstimer";
 			reg = <0x01c60000 0x1000>;
@@ -768,9 +794,6 @@
 			interconnect-names = "dma-mem";
 			status = "disabled";
 
-			assigned-clocks = <&ccu CLK_DE_BE>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
index 32d22025ac99..32d22025ac99 100644
--- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-app4-evb1.dts
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
index 93a15eaaa8cb..93a15eaaa8cb 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-colombus.dts
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
index 049e6ab3cf56..5bce7a32651e 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-hummingbird.dts
@@ -109,7 +109,7 @@
 		};
 	};
 
-	reg_vga_3v3: vga_3v3_regulator {
+	reg_vga_3v3: vga-3v3-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vga-3v3";
 		regulator-min-microvolt = <3300000>;
@@ -119,7 +119,7 @@
 		gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
 	};
@@ -154,7 +154,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
@@ -226,8 +226,8 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 	};
 };
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
index 6cc8ccf53d88..744723d956f0 100644
--- a/arch/arm/boot/dts/sun6i-a31-i7.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-i7.dts
@@ -72,7 +72,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "i7:blue:usr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
index a645c8f4257c..7d2eaaf5c33e 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-m9.dts
@@ -61,7 +61,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "m9:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -115,8 +115,8 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
index 648f24746234..83611434270c 100644
--- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31-mele-a1000g-quad.dts
@@ -61,7 +61,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "a1000g:blue:pwr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
@@ -115,8 +115,8 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
index bbeb743633c6..f0145d6b9c53 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31.dtsi
@@ -46,6 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 #include <dt-bindings/clock/sun6i-a31-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/reset/sun6i-a31-ccu.h>
 
 / {
@@ -105,13 +106,12 @@
 			reg = <0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -121,13 +121,12 @@
 			reg = <1>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -137,13 +136,12 @@
 			reg = <2>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -153,19 +151,18 @@
 			reg = <3>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				1008000	1200000
-				864000	1200000
-				720000	1100000
-				480000	1000000
-				>;
+				<1008000 1200000>,
+				<864000 1200000>,
+				<720000 1100000>,
+				<480000 1000000>;
 			#cooling-cells = <2>;
 		};
 	};
 
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
@@ -182,14 +179,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <70000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
@@ -285,14 +282,19 @@
 			compatible = "allwinner,sun6i-a31-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_AHB1_LCD0>;
-			reset-names = "lcd";
+			dmas = <&dma 11>;
+			resets = <&ccu RST_AHB1_LCD0>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
 			clocks = <&ccu CLK_AHB1_LCD0>,
 				 <&ccu CLK_LCD0_CH0>,
-				 <&ccu CLK_LCD0_CH1>;
+				 <&ccu CLK_LCD0_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon0-pixel-clock";
 			#clock-cells = <0>;
 
@@ -334,14 +336,18 @@
 			compatible = "allwinner,sun6i-a31-tcon";
 			reg = <0x01c0d000 0x1000>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_AHB1_LCD1>;
-			reset-names = "lcd";
+			dmas = <&dma 12>;
+			resets = <&ccu RST_AHB1_LCD1>,
+				 <&ccu RST_AHB1_LVDS>;
+			reset-names = "lcd", "lvds";
 			clocks = <&ccu CLK_AHB1_LCD1>,
 				 <&ccu CLK_LCD1_CH0>,
-				 <&ccu CLK_LCD1_CH1>;
+				 <&ccu CLK_LCD1_CH1>,
+				 <&ccu 15>;
 			clock-names = "ahb",
 				      "tcon-ch0",
-				      "tcon-ch1";
+				      "tcon-ch1",
+				      "lvds-alt";
 			clock-output-names = "tcon1-pixel-clock";
 			#clock-cells = <0>;
 
@@ -469,7 +475,6 @@
 				 <&ccu CLK_PLL_VIDEO1_2X>;
 			clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
 			resets = <&ccu RST_AHB1_HDMI>;
-			reset-names = "ahb";
 			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
 			dmas = <&dma 13>, <&dma 13>, <&dma 14>;
 			status = "disabled";
@@ -545,6 +550,7 @@
 			clocks = <&ccu CLK_AHB1_EHCI0>;
 			resets = <&ccu RST_AHB1_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -555,6 +561,7 @@
 			clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_AHB1_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -565,6 +572,7 @@
 			clocks = <&ccu CLK_AHB1_EHCI1>;
 			resets = <&ccu RST_AHB1_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -575,6 +583,7 @@
 			clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_AHB1_OHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -590,7 +599,7 @@
 		ccu: clock@1c20000 {
 			compatible = "allwinner,sun6i-a31-ccu";
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -599,11 +608,13 @@
 		pio: pinctrl@1c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_APB1_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -790,6 +801,7 @@
 		lradc: lradc@1c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -810,7 +822,7 @@
 			clocks = <&ccu CLK_APB2_UART0>;
 			resets = <&ccu RST_APB2_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -823,7 +835,7 @@
 			clocks = <&ccu CLK_APB2_UART1>;
 			resets = <&ccu RST_APB2_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -836,7 +848,7 @@
 			clocks = <&ccu CLK_APB2_UART2>;
 			resets = <&ccu RST_APB2_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -849,7 +861,7 @@
 			clocks = <&ccu CLK_APB2_UART3>;
 			resets = <&ccu RST_APB2_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -862,7 +874,7 @@
 			clocks = <&ccu CLK_APB2_UART4>;
 			resets = <&ccu RST_APB2_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -875,7 +887,7 @@
 			clocks = <&ccu CLK_APB2_UART5>;
 			resets = <&ccu RST_APB2_UART5>;
 			dmas = <&dma 22>, <&dma 22>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -1127,9 +1139,6 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_BE1>;
 
-			assigned-clocks = <&ccu CLK_BE1>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1173,9 +1182,6 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_DRC1>;
 
-			assigned-clocks = <&ccu CLK_IEP_DRC1>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1219,9 +1225,6 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_BE0>;
 
-			assigned-clocks = <&ccu CLK_BE0>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1262,9 +1265,6 @@
 				      "ram";
 			resets = <&ccu RST_AHB1_DRC0>;
 
-			assigned-clocks = <&ccu CLK_IEP_DRC0>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1299,16 +1299,17 @@
 			#clock-cells = <1>;
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&osc32k>;
 			clock-output-names = "osc32k";
 		};
 
-		nmi_intc: interrupt-controller@1f00c00 {
+		r_intc: interrupt-controller@1f00c00 {
 			compatible = "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <3>;
 			reg = <0x01f00c00 0x400>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -1317,16 +1318,16 @@
 			compatible = "allwinner,sun6i-a31-prcm";
 			reg = <0x01f01400 0x200>;
 
-			ar100: ar100_clk {
+			ar100: ar100-clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&rtc 0>, <&osc24M>,
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>,
 					 <&ccu CLK_PLL_PERIPH>,
 					 <&ccu CLK_PLL_PERIPH>;
 				clock-output-names = "ar100";
 			};
 
-			ahb0: ahb0_clk {
+			ahb0: ahb0-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -1335,14 +1336,14 @@
 				clock-output-names = "ahb0";
 			};
 
-			apb0: apb0_clk {
+			apb0: apb0-clk {
 				compatible = "allwinner,sun6i-a31-apb0-clk";
 				#clock-cells = <0>;
 				clocks = <&ahb0>;
 				clock-output-names = "apb0";
 			};
 
-			apb0_gates: apb0_gates_clk {
+			apb0_gates: apb0-gates-clk {
 				compatible = "allwinner,sun6i-a31-apb0-gates-clk";
 				#clock-cells = <1>;
 				clocks = <&apb0>;
@@ -1352,14 +1353,14 @@
 						"apb0_i2c";
 			};
 
-			ir_clk: ir_clk {
+			ir_clk: ir-clk {
 				#clock-cells = <0>;
 				compatible = "allwinner,sun4i-a10-mod0-clk";
-				clocks = <&rtc 0>, <&osc24M>;
+				clocks = <&rtc CLK_OSC32K>, <&osc24M>;
 				clock-output-names = "ir";
 			};
 
-			apb0_rst: apb0_rst {
+			apb0_rst: apb0-rst {
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
 			};
@@ -1383,11 +1384,11 @@
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun6i-a31-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
index a2ef7846e2c8..a2ef7846e2c8 100644
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-colorfly-e708-q1.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
index 1d15e15011c6..1d15e15011c6 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-cs908.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
index c5e2c55cdc63..c5e2c55cdc63 100644
--- a/arch/arm/boot/dts/sun6i-a31s-inet-q972.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-inet-q972.dts
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
index bc3170a0b8b5..b32b70ada7fd 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-primo81.dts
@@ -115,7 +115,6 @@
 		reg = <0x1c>;
 		interrupt-parent = <&pio>;
 		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
-		#io-channel-cells = <1>;
 	};
 };
 
@@ -159,8 +158,8 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		x-powers,drive-vbus-en;
 	};
 };
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
index 3099491de8c4..227ad489731c 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s-core.dtsi
@@ -78,8 +78,8 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
index 0af48e143b66..56956352914d 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sina31s.dts
@@ -67,7 +67,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "sina31s:status:usr";
 			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
 		};
diff --git a/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
new file mode 100644
index 000000000000..f63d67ec9887
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-sinovoip-bpi-m2.dts
@@ -0,0 +1,334 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31s.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Sinovoip BPI-M2";
+	compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bpi-m2:blue:usr";
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		led-1 {
+			label = "bpi-m2:green:usr";
+			gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
+		};
+
+		led-2 {
+			label = "bpi-m2:red:usr";
+			gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
+		};
+	};
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&s_ir_rx_pin>;
+	status = "okay";
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins>;
+	vmmc-supply = <&reg_aldo1>;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&p2wi {
+	status = "okay";
+
+	axp22x: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo1 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vcc-gmac";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vdd-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+	regulator-always-on;
+	regulator-min-microvolt = <700000>;
+	regulator-max-microvolt = <1320000>;
+	regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-mac";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-pb";
+};
+
+&reg_eldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+	status = "okay";
+};
+
+&reg_ldo_io1 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pm-cpus";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&pio {
+	gpio-line-names =
+		/* PA */
+		"ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "",
+		"", "ETXCLK", "ETXEN", "EGTXCLK", "ERXD0", "ERXD1",
+		"ERXD2", "ERXD3", "", "", "", "", "ERXDV", "ERXCK",
+		"ETXERR", "ERXERR", "ECOL", "ECRS", "ECLKIN", "EMDC",
+		"EMDIO", "", "", "", "",
+
+		/* PB */
+		"CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37",
+		"CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "",
+
+		/* PC */
+		"", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK",
+		"WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "USB-DRV", "", "", "", "",
+
+		/* PD */
+		"CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17",
+		"CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27",
+		"CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37",
+		"CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34",
+		"CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22",
+		"CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "",
+
+		/* PE */
+		"CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08",
+		"CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19",
+		"CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29",
+		"CN6-P31", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "",
+
+		/* PF */
+		"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+		"SDC0-D2", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"",
+
+		/* PG */
+		"CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07",
+		"LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15",
+		"LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23",
+		"CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "",
+		"", "", "", "", "", "", "", "", "",
+
+		/* PH */
+		"", "", "", "", "", "", "", "", "", "CN7-P07",
+		"CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16",
+		"CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03",
+		"CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32",
+		"CN6-P26", "CN6-P18", "", "", "", "";
+};
+
+&r_pio {
+	gpio-line-names =
+		/* PL */
+		"PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX",
+		"WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE",
+		"WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "",
+
+		/* PM */
+		"CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
index 2504e7189c54..0b61f5368d44 100644
--- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -98,8 +98,8 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
index 97e2c51d0aea..97e2c51d0aea 100644
--- a/arch/arm/boot/dts/sun6i-a31s.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-a31s.dtsi
diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
index 7de2abd541c1..f38d19c6be8c 100644
--- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun6i-reference-design-tablet.dtsi
@@ -79,8 +79,8 @@
 	axp22x: pmic@68 {
 		compatible = "x-powers,axp221";
 		reg = <0x68>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
index 32d5d45a35c0..f2d7fab9978d 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi-m1-plus.dts
@@ -74,19 +74,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-0 {
 			label = "bananapi-m1-plus:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
 
-		pwr {
+		led-1 {
 			label = "bananapi-m1-plus:pwr:usr";
 			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */
 	};
@@ -130,7 +130,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
index bb3987e101c2..d8b362c9661a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
@@ -48,6 +48,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "LeMaker Banana Pi";
@@ -77,7 +78,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "bananapi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
@@ -104,16 +105,15 @@
 
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
-	operating-points = <
+	operating-points =
 		/* kHz	  uV */
-		960000	1400000
-		912000	1400000
-		864000	1350000
-		720000	1250000
-		528000	1150000
-		312000	1100000
-		144000	1050000
-		>;
+		<960000	1400000>,
+		<912000	1400000>,
+		<864000	1350000>,
+		<720000	1250000>,
+		<528000	1150000>,
+		<312000	1100000>,
+		<144000	1050000>;
 };
 
 &de {
@@ -132,7 +132,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 };
@@ -170,6 +170,32 @@
 &gmac_mdio {
 	phy1: ethernet-phy@1 {
 		reg = <1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+				function = LED_FUNCTION_LAN;
+				linux,default-trigger = "netdev";
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
index 01ccff756996..e22f0e8bb17a 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapro.dts
@@ -63,12 +63,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "bananapro:blue:usr";
 			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-1 {
 			label = "bananapro:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
@@ -110,7 +110,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
index b8203e4ef21c..e35e6990c4b2 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubieboard2.dts
@@ -75,12 +75,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "cubieboard2:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-1 {
 			label = "cubieboard2:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
index 8c8dee6ea461..be9b31d0f4b5 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-cubietruck.dts
@@ -75,28 +75,28 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "cubietruck:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 		};
 
-		orange {
+		led-1 {
 			label = "cubietruck:orange:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		white {
+		led-2 {
 			label = "cubietruck:white:usr";
 			gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-3 {
 			label = "cubietruck:green:usr";
 			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
 		clocks = <&ccu CLK_OUT_A>;
@@ -151,7 +151,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
new file mode 100644
index 000000000000..097e479c2772
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-haoyu-marsboard.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Conley Lee
+ * Conley Lee <conleylee@foxmail.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A20";
+	compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy0>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
index 3def2a330598..f1e26b75cd90 100644
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-hummingbird.dts
@@ -65,7 +65,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	reg_mmc3_vdd: mmc3_vdd {
+	reg_mmc3_vdd: regulator-mmc3-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "mmc3_vdd";
 		regulator-min-microvolt = <3000000>;
@@ -74,7 +74,7 @@
 		gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
 	};
 
-	reg_gmac_vdd: gmac_vdd {
+	reg_gmac_vdd: regulator-gmac-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "gmac_vdd";
 		regulator-min-microvolt = <3000000>;
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
index 358ed5f1b1c1..b21ddd0ec1c2 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-i12-tvbox.dts
@@ -62,12 +62,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		red {
+		led-0 {
 			label = "i12_tvbox:red:usr";
 			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
 		};
 
-		blue {
+		led-1 {
 			label = "i12_tvbox:blue:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
new file mode 100644
index 000000000000..577ead1d02a0
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20-adb4006.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+/dts-v1/;
+
+#include "sun7i-a20-icnova-a20.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "In-Circuit ICnova A20 ADB4006";
+	compatible = "incircuit,icnova-a20-adb4006", "incircuit,icnova-a20",
+		     "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_YELLOW>;
+			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* PH21 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
new file mode 100644
index 000000000000..46616c6bc899
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-a20.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// Copyright (C) 2023 In-Circuit GmbH
+
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
index 413505f45a81..413505f45a81 100644
--- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-icnova-swac.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
index 946c27278321..8ff83016ff5a 100644
--- a/arch/arm/boot/dts/sun7i-a20-itead-ibox.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-itead-ibox.dts
@@ -53,13 +53,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_itead_core>;
 
-		green {
+		led-0 {
 			label = "itead_core:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		blue {
+		led-1 {
 			label = "itead_core:blue:usr";
 			gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
index 17fa8901fc00..97518afe4658 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-lamobo-r1.dts
@@ -75,7 +75,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "lamobo_r1:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
new file mode 100644
index 000000000000..da5a2eea4ce3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-linutronix-testbox-v2.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2020 Linutronix GmbH
+ * Author: Benedikt Spranger <b.spranger@linutronix.de>
+ */
+
+/dts-v1/;
+#include "sun7i-a20-lamobo-r1.dts"
+
+/ {
+	model = "Lamobo R1";
+	compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
+
+	leds {
+		led-opto1 {
+			label = "lamobo_r1:opto:powerswitch";
+			gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-opto2 {
+			label = "lamobo_r1:opto:relay";
+			gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		status = "okay";
+	};
+
+	atecc508a@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can_ph_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
index 6bff9e731fc3..f161d5238860 100644
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-m3.dts
@@ -64,7 +64,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led {
 			label = "m3:blue:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
index 1491c603f661..1491c603f661 100644
--- a/arch/arm/boot/dts/sun7i-a20-mk808c.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-mk808c.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
index 20bf09b2226c..fb835730bbc4 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb-emmc.dts
@@ -14,7 +14,7 @@
 	model = "Olimex A20-Olimex-SOM-EVB-eMMC";
 	compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20";
 
-	mmc2_pwrseq: mmc2_pwrseq {
+	mmc2_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>;
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
index 6f9c54b8e49a..f05ee32bc9cb 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som-evb.dts
@@ -75,7 +75,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "a20-olimex-som-evb:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
index a59755a2e7a9..e8977c2fe798 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb-emmc.dts
@@ -13,7 +13,7 @@
 	model = "Olimex A20-SOM204-EVB-eMMC";
 	compatible = "olimex,a20-olimex-som204-evb-emmc", "allwinner,sun7i-a20";
 
-	mmc2_pwrseq: mmc2_pwrseq {
+	mmc2_pwrseq: pwrseq-1 {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
index 230d62a6b8f1..a55406657449 100644
--- a/arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olimex-som204-evb.dts
@@ -46,26 +46,26 @@
 	leds {
 		compatible = "gpio-leds";
 
-		stat {
+		led-0 {
 			label = "a20-som204-evb:green:stat";
 			gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		led1 {
+		led-1 {
 			label = "a20-som204-evb:green:led1";
 			gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		led2 {
+		led-2 {
 			label = "a20-som204-evb:yellow:led2";
 			gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	rtl_pwrseq: rtl_pwrseq {
+	rtl_pwrseq: pwrseq-0 {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>;
 	};
@@ -177,7 +177,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8723bs: sdio_wifi@1 {
+	rtl8723bs: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
new file mode 100644
index 000000000000..033cab3443f8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime-emmc.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+#include "sun7i-a20-olinuxino-lime.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME-eMMC";
+	compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
index 2adbac860119..92938d022295 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime.dts
@@ -78,7 +78,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		green {
+		led {
 			label = "a20-olinuxino-lime:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
index decb014a382b..decb014a382b 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2-emmc.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
index 9ba62774e89a..435a189332e8 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-lime2.dts
@@ -75,14 +75,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		green {
+		led {
 			label = "a20-olinuxino-lime2:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	reg_axp_ipsout: axp_ipsout {
+	reg_axp_ipsout: regulator-axp-ipsout {
 		compatible = "regulator-fixed";
 		regulator-name = "axp-ipsout";
 		regulator-min-microvolt = <5000000>;
@@ -112,7 +112,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
index 2337b44a88aa..2337b44a88aa 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro-emmc.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro-emmc.dts
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
index 359bd0d5b3b1..a1b89b2a2999 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
@@ -82,7 +82,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins_olinuxino>;
 
-		green {
+		led {
 			label = "a20-olinuxino-micro:green:usr";
 			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
index 2e328d2cefc1..84efa01e7cba 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi-mini.dts
@@ -75,12 +75,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-0 {
 			label = "orangepi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 		};
 
-		blue {
+		led-1 {
 			label = "orangepi:blue:usr";
 			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
 		};
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
index d75b2e2bab28..5d77f1d9818f 100644
--- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-orangepi.dts
@@ -64,7 +64,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "orangepi:green:usr";
 			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
 		};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
index fce2f7fcd084..e40ecb48d726 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3-nano.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright 2015 Adam Sampson <ats@offog.org>
+ * Copyright 2015-2020 Adam Sampson <ats@offog.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -72,14 +72,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		/* Marked "LED3" on the PCB. */
-		usr1 {
+		led-3 {
 			label = "pcduino3-nano:green:usr1";
 			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
 		};
 
-		/* Marked "LED4" on the PCB. */
-		usr2 {
+		led-4 {
 			label = "pcduino3-nano:green:usr2";
 			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
 		};
@@ -115,7 +113,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
index cc8271d777b8..928b86a95f34 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-pcduino3.dts
@@ -64,12 +64,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		tx {
+		led-0 {
 			label = "pcduino3:green:tx";
 			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
 		};
 
-		rx {
+		led-1 {
 			label = "pcduino3:green:rx";
 			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
 		};
@@ -78,19 +78,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		back {
+		key-back {
 			label = "Key Back";
 			linux,code = <KEY_BACK>;
 			gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
 		};
 
-		home {
+		key-home {
 			label = "Key Home";
 			linux,code = <KEY_HOME>;
 			gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
 		};
 
-		menu {
+		key-menu {
 			label = "Key Menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
index 6a66b0432dfa..fef02fcbbdf8 100644
--- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wexler-tab7200.dts
@@ -64,6 +64,7 @@
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+		power-supply = <&reg_vcc3v3>;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
index 3bfae98f3cc3..29199b6a3b4a 100644
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-wits-pro-a20-dkt.dts
@@ -60,7 +60,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	mmc3_pwrseq: mmc3_pwrseq {
+	mmc3_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */
 	};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
index 49380de754a9..5f44f09c5545 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20.dtsi
@@ -47,6 +47,7 @@
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/clock/sun7i-a20-ccu.h>
 #include <dt-bindings/reset/sun4i-a10-ccu.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -105,16 +106,15 @@
 			reg = <0>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				960000	1400000
-				912000	1400000
-				864000	1300000
-				720000	1200000
-				528000	1100000
-				312000	1000000
-				144000	1000000
-				>;
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
 			#cooling-cells = <2>;
 		};
 
@@ -124,22 +124,21 @@
 			reg = <1>;
 			clocks = <&ccu CLK_CPU>;
 			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
+			operating-points =
 				/* kHz	  uV */
-				960000	1400000
-				912000	1400000
-				864000	1300000
-				720000	1200000
-				528000	1100000
-				312000	1000000
-				144000	1000000
-				>;
+				<960000	1400000>,
+				<912000	1400000>,
+				<864000	1300000>,
+				<720000	1200000>,
+				<528000	1100000>,
+				<312000	1000000>,
+				<144000	1000000>;
 			#cooling-cells = <2>;
 		};
 	};
 
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
@@ -154,14 +153,14 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <100000>;
 					hysteresis = <2000>;
@@ -180,7 +179,7 @@
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};
@@ -380,9 +379,8 @@
 			compatible = "allwinner,sun7i-a20-csi0";
 			reg = <0x01c09000 0x1000>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>,
-				 <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
-			clock-names = "bus", "mod", "isp", "ram";
+			clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
 			resets = <&ccu RST_CSI0>;
 			status = "disabled";
 		};
@@ -405,11 +403,12 @@
 		};
 
 		tcon0: lcd-controller@1c0c000 {
-			compatible = "allwinner,sun7i-a20-tcon";
+			compatible = "allwinner,sun7i-a20-tcon0",
+				     "allwinner,sun7i-a20-tcon";
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ccu RST_TCON0>;
-			reset-names = "lcd";
+			resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
+			reset-names = "lcd", "lvds";
 			clocks = <&ccu CLK_AHB_LCD0>,
 				 <&ccu CLK_TCON0_CH0>,
 				 <&ccu CLK_TCON0_CH1>;
@@ -455,7 +454,8 @@
 		};
 
 		tcon1: lcd-controller@1c0d000 {
-			compatible = "allwinner,sun7i-a20-tcon";
+			compatible = "allwinner,sun7i-a20-tcon1",
+				     "allwinner,sun7i-a20-tcon";
 			reg = <0x01c0d000 0x1000>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&ccu RST_TCON1>;
@@ -623,6 +623,7 @@
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_AHB_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -632,6 +633,7 @@
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -714,6 +716,7 @@
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_AHB_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -723,6 +726,18 @@
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun7i-a20-csi1",
+				     "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
 			status = "disabled";
 		};
 
@@ -800,6 +815,31 @@
 			};
 
 			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
 			emac_pa_pins: emac-pa-pins {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
@@ -893,6 +933,20 @@
 			};
 
 			/omit-if-no-ref/
+			lcd_lvds0_pins: lcd-lvds0-pins {
+				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+				       "PD5", "PD6", "PD7", "PD8", "PD9";
+				function = "lvds0";
+			};
+
+			/omit-if-no-ref/
+			lcd_lvds1_pins: lcd-lvds1-pins {
+				pins = "PD10", "PD11", "PD12", "PD13", "PD14",
+				       "PD15", "PD16", "PD17", "PD18", "PD19";
+				function = "lvds1";
+			};
+
+			/omit-if-no-ref/
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
index 52eed0ae3607..2af8382ccdf5 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-a33.dtsi
@@ -44,6 +44,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
 #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
 
@@ -107,7 +108,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -115,7 +116,7 @@
 			clock-output-names = "osc24M";
 		};
 
-		ext_osc32k: ext_osc32k_clk {
+		ext_osc32k: ext-osc32k-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -182,14 +183,19 @@
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c0c000 0x1000>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma 12>;
 			clocks = <&ccu CLK_BUS_LCD>,
-				 <&ccu CLK_LCD_CH0>;
+				 <&ccu CLK_LCD_CH0>,
+				 <&ccu 13>;
 			clock-names = "ahb",
-				      "tcon-ch0";
-			clock-output-names = "tcon-pixel-clock";
+				      "tcon-ch0",
+				      "lvds-alt";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
-			resets = <&ccu RST_BUS_LCD>;
-			reset-names = "lcd";
+			resets = <&ccu RST_BUS_LCD>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "lvds";
 			status = "disabled";
 
 			ports {
@@ -307,6 +313,7 @@
 			clocks = <&ccu CLK_BUS_EHCI>;
 			resets = <&ccu RST_BUS_EHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -317,12 +324,13 @@
 			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
 			resets = <&ccu RST_BUS_OHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
 		ccu: clock@1c20000 {
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -331,8 +339,10 @@
 		pio: pinctrl@1c20800 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
 			/* interrupts get set in SoC specific dtsi file */
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -466,6 +476,7 @@
 		lradc: lradc@1c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -479,7 +490,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -492,7 +503,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -505,7 +516,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -518,7 +529,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -531,7 +542,7 @@
 			clocks = <&ccu CLK_BUS_UART4>;
 			resets = <&ccu RST_BUS_UART4>;
 			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -677,9 +688,6 @@
 			clock-names = "ahb", "mod", "ram";
 			resets = <&ccu RST_BUS_DRC>;
 
-			assigned-clocks = <&ccu CLK_DRC>;
-			assigned-clock-rates = <300000000>;
-
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -705,6 +713,7 @@
 		rtc: rtc@1f00000 {
 			compatible = "allwinner,sun8i-a23-rtc";
 			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			clock-output-names = "osc32k", "osc32k-out";
@@ -712,10 +721,10 @@
 			#clock-cells = <1>;
 		};
 
-		nmi_intc: interrupt-controller@1f00c00 {
+		r_intc: interrupt-controller@1f00c00 {
 			compatible = "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <3>;
 			reg = <0x01f00c00 0x400>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -724,7 +733,7 @@
 			compatible = "allwinner,sun8i-a23-prcm";
 			reg = <0x01f01400 0x200>;
 
-			ar100: ar100_clk {
+			ar100: ar100-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -733,7 +742,7 @@
 				clock-output-names = "ar100";
 			};
 
-			ahb0: ahb0_clk {
+			ahb0: ahb0-clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
@@ -742,14 +751,14 @@
 				clock-output-names = "ahb0";
 			};
 
-			apb0: apb0_clk {
+			apb0: apb0-clk {
 				compatible = "allwinner,sun8i-a23-apb0-clk";
 				#clock-cells = <0>;
 				clocks = <&ahb0>;
 				clock-output-names = "apb0";
 			};
 
-			apb0_gates: apb0_gates_clk {
+			apb0_gates: apb0-gates-clk {
 				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
 				#clock-cells = <1>;
 				clocks = <&apb0>;
@@ -758,7 +767,7 @@
 						"apb0_i2c";
 			};
 
-			apb0_rst: apb0_rst {
+			apb0_rst: apb0-rst {
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
 			};
@@ -801,10 +810,10 @@
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-a23-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
+			clocks = <&apb0_gates 0>, <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
index 53fb1be0401a..53fb1be0401a 100644
--- a/arch/arm/boot/dts/sun8i-a23-evb.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-evb.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
index bcbc9b0758f9..bcbc9b0758f9 100644
--- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-gt90h-v4.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
index d4405752a414..d4405752a414 100644
--- a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-inet86dz.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
index c2f22fc33811..c2f22fc33811 120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v1.2.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
index c2f22fc33811..c2f22fc33811 120000
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-ippo-q8h-v5.dts
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
index d5f6aebd7216..0c585a6d990d 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2407pxe03.dts
@@ -52,7 +52,7 @@
 		ethernet0 = &esp8089;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -76,7 +76,7 @@
 	non-removable;
 	status = "okay";
 
-	esp8089: sdio_wifi@1 {
+	esp8089: wifi@1 {
 		compatible = "esp,esp8089";
 		reg = <1>;
 		esp,crystal-26M-en = <2>;
diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
index 9f9232a2fefb..63cb4e194a03 100644
--- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-polaroid-mid2809pxe04.dts
@@ -52,7 +52,7 @@
 		ethernet0 = &esp8089;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
 		/* The esp8089 needs 200 ms after driving wifi-en high */
@@ -69,7 +69,7 @@
 	non-removable;
 	status = "okay";
 
-	esp8089: sdio_wifi@1 {
+	esp8089: wifi@1 {
 		compatible = "esp,esp8089";
 		reg = <1>;
 		esp,crystal-26M-en = <2>;
diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
index 51097c77a152..51097c77a152 100644
--- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23-q8-tablet.dts
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
index a5e884a8b2ae..a5e884a8b2ae 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a23.dtsi
diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
index 4519fd791a8f..4519fd791a8f 120000
--- a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-et-q8-v1.6.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
index 2dfdd0a3151e..f00ce03ffc84 100644
--- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ga10h-v1.1.dts
@@ -85,7 +85,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8703as: sdio_wifi@1 {
+	rtl8703as: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
index 317763069c0a..162ba93f7484 100644
--- a/arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-inet-d978-rev2.dts
@@ -63,7 +63,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pin_d978>;
 
-		home {
+		led {
 			label = "d978:blue:home";
 			gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
 		};
@@ -78,7 +78,7 @@
 	non-removable;
 	status = "okay";
 
-	rtl8723bs: sdio_wifi@1 {
+	rtl8723bs: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
index 4519fd791a8f..4519fd791a8f 120000
--- a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-ippo-q8h-v1.2.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
index 3d78169cdeed..6fee8f133508 100644
--- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-olinuxino.dts
@@ -62,7 +62,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led {
 			label = "a33-olinuxino:green:usr";
 			gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -98,8 +98,8 @@
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
 	};
@@ -194,8 +194,8 @@
 				    "Headphone", "Headphone Jack";
 	/* Board level routing. First 2 routes copied from SoC level */
 	simple-audio-card,routing =
-		"Left DAC", "AIF1 Slot 0 Left",
-		"Right DAC", "AIF1 Slot 0 Right",
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
 		"HP", "HPCOM",
 		"Headphone Jack", "HP",
 		"MIC1", "Microphone Jack",
diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
index 9c5750c25613..9c5750c25613 100644
--- a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-q8-tablet.dts
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
index 785798e3a104..0c82ff3c7cb4 100644
--- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-sinlinx-sina33.dts
@@ -63,6 +63,7 @@
 
 	panel {
 		compatible = "netron-dy,e231732";
+		power-supply = <&reg_vcc3v3>;
 
 		port {
 			panel_input: endpoint {
@@ -164,8 +165,8 @@
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 	};
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi
new file mode 100644
index 000000000000..ba794b842ec4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar-core1.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+#include "sun8i-a33.dtsi"
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* Increase drive strength for DDR modes */
+	drive-strength = <40>;
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp22x: pmic@3a3 {
+		compatible = "x-powers,axp223";
+		reg = <0x3a3>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		eldoin-supply = <&reg_dcdc1>;
+		x-powers,drive-vbus-en;
+	};
+};
+
+#include "axp223.dtsi"
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <2350000>;
+	regulator-max-microvolt = <2650000>;
+	regulator-name = "vdd-dll";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-avcc";
+};
+
+&reg_dc5ldo {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpus";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <900000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_rtc_ldo {
+	regulator-name = "vcc-rtc";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts
new file mode 100644
index 000000000000..9f5c29b3df46
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33-vstar.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "sun8i-a33-vstar-core1.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Rervision A33-Vstar";
+	compatible = "rervision,a33-vstar",
+		     "rervision,a33-core1",
+		     "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &r8152;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&dai {
+	status = "okay";
+};
+
+&ehci0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub@1 {
+		/* Onboard GL850G hub which needs no extra power sequence */
+		compatible = "usb5e3,608";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		r8152: ethernet@4 {
+			/*
+			 * Onboard Realtek RTL8152 USB Ethernet,
+			 * with no MAC address programmed
+			 */
+			compatible = "usbbda,8152";
+			reg = <4>;
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_aldo3>;
+	status = "okay";
+
+	button-191 {
+		label = "V+";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191011>;
+	};
+
+	button-391 {
+		label = "V-";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <391304>;
+	};
+
+	button-600 {
+		label = "BACK";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pg_pins>;
+	vmmc-supply = <&reg_dldo1>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+		interrupt-names = "host-wake";
+	};
+};
+
+/*
+ * Our WiFi chip needs both DLDO1 and DLDO2 to be powered at the same
+ * time, with the two being in sync. Since this is not really
+ * supported right now, just use the two as always on, and we will fix
+ * it later.
+ */
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi0";
+};
+
+&reg_dldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi1";
+};
+
+&reg_drivevbus {
+	regulator-name = "usb0-vbus";
+	status = "okay";
+};
+
+&sound {
+	/* TODO: on-board microphone */
+
+	simple-audio-card,widgets = "Headphone", "Headphone Jack";
+	simple-audio-card,routing =
+		"Left DAC", "DACL",
+		"Right DAC", "DACR",
+		"Headphone Jack", "HP";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_dldo1>;
+		device-wakeup-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+		host-wakeup-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		shutdown-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	};
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
+	usb0_vbus-supply = <&reg_drivevbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
index 1532a0e59af4..36b2d78cdab9 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a33.dtsi
@@ -46,7 +46,7 @@
 #include <dt-bindings/thermal/thermal.h>
 
 / {
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -164,7 +164,7 @@
 		io-channels = <&ths>;
 	};
 
-	mali_opp_table: gpu-opp-table {
+	mali_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
 		opp-144000000 {
@@ -189,8 +189,8 @@
 		simple-audio-card,mclk-fs = <128>;
 		simple-audio-card,aux-devs = <&codec_analog>;
 		simple-audio-card,routing =
-			"Left DAC", "AIF1 Slot 0 Left",
-			"Right DAC", "AIF1 Slot 0 Right";
+			"Left DAC", "DACL",
+			"Right DAC", "DACR";
 		status = "disabled";
 
 		simple-audio-card,cpu {
@@ -198,7 +198,7 @@
 		};
 
 		link_codec: simple-audio-card,codec {
-			sound-dai = <&codec>;
+			sound-dai = <&codec 0>;
 		};
 	};
 
@@ -215,7 +215,7 @@
 		};
 
 		crypto: crypto-engine@1c15000 {
-			compatible = "allwinner,sun4i-a10-crypto";
+			compatible = "allwinner,sun8i-a33-crypto";
 			reg = <0x01c15000 0x1000>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
@@ -238,7 +238,7 @@
 		};
 
 		codec: codec@1c22e00 {
-			#sound-dai-cells = <0>;
+			#sound-dai-cells = <1>;
 			compatible = "allwinner,sun8i-a33-codec";
 			reg = <0x01c22e00 0x400>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
@@ -278,6 +278,7 @@
 		dphy: d-phy@1ca1000 {
 			compatible = "allwinner,sun6i-a31-mipi-dphy";
 			reg = <0x01ca1000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_MIPI_DSI>,
 				 <&ccu CLK_DSI_DPHY>;
 			clock-names = "bus", "mod";
@@ -288,7 +289,7 @@
 	};
 
 	thermal-zones {
-		cpu_thermal {
+		cpu-thermal {
 			/* milliseconds */
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
@@ -322,35 +323,35 @@
 			};
 
 			trips {
-				cpu_alert0: cpu_alert0 {
+				cpu_alert0: cpu-alert0 {
 					/* milliCelsius */
 					temperature = <75000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				gpu_alert0: gpu_alert0 {
+				gpu_alert0: gpu-alert0 {
 					/* milliCelsius */
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_alert1: cpu_alert1 {
+				cpu_alert1: cpu-alert1 {
 					/* milliCelsius */
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				gpu_alert1: gpu_alert1 {
+				gpu_alert1: gpu-alert1 {
 					/* milliCelsius */
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "hot";
 				};
 
-				cpu_crit: cpu_crit {
+				cpu_crit: cpu-crit {
 					/* milliCelsius */
 					temperature = <110000>;
 					hysteresis = <2000>;
@@ -372,8 +373,6 @@
 		      "ram", "sat";
 	resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>;
 	reset-names = "be", "sat";
-	assigned-clocks = <&ccu CLK_DE_BE>;
-	assigned-clock-rates = <300000000>;
 };
 
 &ccu {
diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
index 9c006fc18821..c31c97d16024 100644
--- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -122,7 +122,7 @@
 		compatible = "x-powers,axp818", "x-powers,axp813";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		swin-supply = <&reg_dcdc1>;
 	};
@@ -142,7 +142,7 @@
 		ac100_rtc: rtc {
 			compatible = "x-powers,ac100-rtc";
 			interrupt-parent = <&r_intc>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&ac100_codec>;
 			#clock-cells = <1>;
 			clock-output-names = "cko1_rtc",
diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
index 9d34eabba121..32e811fa23e2 100644
--- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-bananapi-m3.dts
@@ -74,12 +74,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "bananapi-m3:blue:usr";
 			gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		green {
+		led-1 {
 			label = "bananapi-m3:green:usr";
 			gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>;
 		};
@@ -95,7 +95,7 @@
 		gpio = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&ac100_rtc 1>;
 		clock-names = "ext_clock";
@@ -105,6 +105,21 @@
 		/* enables internal regulator and de-asserts reset */
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
 	};
+
+	/*
+	 * Power supply for the SATA disk, behind a USB-SATA bridge.
+	 * Since it is a USB device, there is no consumer in the DT, so we
+	 * have to keep this always on.
+	 */
+	regulator-sata-disk-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-disk-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
+	};
 };
 
 &cpu0 {
@@ -131,7 +146,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_sw>;
 	phy-handle = <&rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	allwinner,rx-delay-ps = <700>;
 	allwinner,tx-delay-ps = <700>;
 	status = "okay";
@@ -203,7 +218,7 @@
 		compatible = "x-powers,axp813";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		fldoin-supply = <&reg_dcdc5>;
 		swin-supply = <&reg_dcdc1>;
@@ -225,7 +240,7 @@
 		ac100_rtc: rtc {
 			compatible = "x-powers,ac100-rtc";
 			interrupt-parent = <&r_intc>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&ac100_codec>;
 			#clock-cells = <1>;
 			clock-output-names = "cko1_rtc",
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
index fb928503ad45..d5e6ddaffbce 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-cubietruck-plus.dts
@@ -74,22 +74,22 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "cubietruck-plus:blue:usr";
 			gpios = <&pio 3 25 GPIO_ACTIVE_HIGH>; /* PD25 */
 		};
 
-		orange {
+		led-1 {
 			label = "cubietruck-plus:orange:usr";
 			gpios = <&pio 3 26 GPIO_ACTIVE_HIGH>; /* PD26 */
 		};
 
-		white {
+		led-2 {
 			label = "cubietruck-plus:white:usr";
 			gpios = <&pio 3 27 GPIO_ACTIVE_HIGH>; /* PD27 */
 		};
 
-		green {
+		led-3 {
 			label = "cubietruck-plus:green:usr";
 			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
 		};
@@ -101,7 +101,7 @@
 		initial-mode = <1>; /* initialize in HUB mode */
 		disabled-ports = <1>;
 		intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-		reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
 		connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
 		refclk-frequency = <19200000>;
 	};
@@ -144,7 +144,7 @@
 		compatible = "linux,spdif-dit";
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		clocks = <&ac100_rtc 1>;
 		clock-names = "ext_clock";
@@ -183,7 +183,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_dldo4>;
 	phy-handle = <&rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
@@ -239,7 +239,7 @@
 		compatible = "x-powers,axp818", "x-powers,axp813";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		swin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
@@ -260,7 +260,7 @@
 		ac100_rtc: rtc {
 			compatible = "x-powers,ac100-rtc";
 			interrupt-parent = <&r_intc>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&ac100_codec>;
 			#clock-cells = <1>;
 			clock-output-names = "cko1_rtc",
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
index 568b90ece342..43982b106a4d 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
@@ -65,7 +65,7 @@
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
-
+		power-supply = <&reg_sw>;
 		brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
 		default-brightness-level = <9>;
 	};
@@ -123,7 +123,7 @@
 		vin-supply = <&reg_vbat>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
 
@@ -164,6 +164,22 @@
 	status = "okay";
 };
 
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */
+		reset-gpios = <&pio 3 5 GPIO_ACTIVE_LOW>; /* PD5 */
+		vcc-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -192,6 +208,7 @@
 	vqmmc-supply = <&reg_dldo1>;
 	non-removable;
 	wakeup-source;
+	keep-power-in-suspend;
 	status = "okay";
 
 	brcmf: wifi@1 {
@@ -246,7 +263,7 @@
 		compatible = "x-powers,axp813";
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		swin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
 	};
@@ -266,7 +283,7 @@
 		ac100_rtc: rtc {
 			compatible = "x-powers,ac100-rtc";
 			interrupt-parent = <&r_intc>;
-			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 			clocks = <&ac100_codec>;
 			#clock-cells = <1>;
 			clock-output-names = "cko1_rtc",
@@ -357,8 +374,8 @@
 };
 
 &reg_dldo3 {
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
 	regulator-name = "vdd-csi";
 };
 
@@ -476,12 +493,12 @@
 };
 
 &usb_otg {
-	dr_mode = "otg";
 	status = "okay";
 };
 
 &usbphy {
-	usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */
+	usb0_vbus_power-supply = <&usb_power_supply>;
 	usb0_vbus-supply = <&reg_drivevbus>;
 	usb1_vbus-supply = <&reg_vmain>;
 	usb2_vbus-supply = <&reg_vmain>;
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
index 523be6611c50..6f88d8764e6a 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
@@ -50,6 +50,7 @@
 #include <dt-bindings/reset/sun8i-a83t-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
 #include <dt-bindings/reset/sun8i-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -71,7 +72,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -82,7 +83,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -93,7 +94,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C0CPUX>;
@@ -115,7 +116,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@101 {
+		cpu101: cpu@101 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -126,7 +127,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@102 {
+		cpu102: cpu@102 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -137,7 +138,7 @@
 			#cooling-cells = <2>;
 		};
 
-		cpu@103 {
+		cpu103: cpu@103 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			clocks = <&ccu CLK_C1CPUX>;
@@ -163,7 +164,7 @@
 		ranges;
 
 		/* TODO: PRCM block has a mux for this. */
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -176,14 +177,14 @@
 		 * It is an internal RC-based oscillator.
 		 * TODO: Its controls are in the PRCM block.
 		 */
-		osc16M: osc16M_clk {
+		osc16M: osc16M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <16000000>;
 			clock-output-names = "osc16M";
 		};
 
-		osc16Md512: osc16Md512_clk {
+		osc16Md512: osc16Md512-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <512>;
@@ -199,7 +200,7 @@
 		status = "disabled";
 	};
 
-	cpu0_opp_table: opp_table0 {
+	cpu0_opp_table: opp-table-cluster0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -252,7 +253,7 @@
 		};
 	};
 
-	cpu1_opp_table: opp_table1 {
+	cpu1_opp_table: opp-table-cluster1 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
@@ -313,7 +314,7 @@
 
 		display_clocks: clock@1000000 {
 			compatible = "allwinner,sun8i-a83t-de2-clk";
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_PLL_DE>;
 			clock-names = "bus",
@@ -323,6 +324,17 @@
 			#reset-cells = <1>;
 		};
 
+		rotate: rotate@1020000 {
+			compatible = "allwinner,sun8i-a83t-de2-rotate";
+			reg = <0x1020000 0x10000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&display_clocks CLK_BUS_ROT>,
+				 <&display_clocks CLK_ROT>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_ROT>;
+		};
+
 		mixer0: mixer@1100000 {
 			compatible = "allwinner,sun8i-a83t-de2-mixer-0";
 			reg = <0x01100000 0x100000>;
@@ -444,7 +456,7 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
 			clock-names = "ahb", "tcon-ch0";
-			clock-output-names = "tcon-pixel-clock";
+			clock-output-names = "tcon-data-clock";
 			#clock-cells = <0>;
 			resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
 			reset-names = "lcd", "lvds";
@@ -581,6 +593,31 @@
 		sid: eeprom@1c14000 {
 			compatible = "allwinner,sun8i-a83t-sid";
 			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 8>;
+			};
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-a83t-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_SS>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "bus", "mod";
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-a83t-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
 		};
 
 		usb_otg: usb@1c19000 {
@@ -632,6 +669,7 @@
 			clocks = <&ccu CLK_BUS_EHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -643,6 +681,7 @@
 			clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -654,6 +693,7 @@
 			clocks = <&ccu CLK_BUS_EHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -668,6 +708,7 @@
 
 		pio: pinctrl@1c20800 {
 			compatible = "allwinner,sun8i-a83t-pinctrl";
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
@@ -987,10 +1028,10 @@
 			reg = <0x01c30000 0x104>;
 			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
-			resets = <&ccu 13>;
-			reset-names = "stmmaceth";
-			clocks = <&ccu 27>;
+			clocks = <&ccu CLK_BUS_EMAC>;
 			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 
 			mdio: mdio {
@@ -1021,9 +1062,6 @@
 			clock-names = "bus", "mod", "ram";
 			resets = <&ccu RST_BUS_CSI>;
 			status = "disabled";
-
-			csi_in: port {
-			};
 		};
 
 		hdmi: hdmi@1ee0000 {
@@ -1074,7 +1112,7 @@
 			compatible = "allwinner,sun8i-a83t-r-intc",
 				     "allwinner,sun6i-a31-r-intc";
 			interrupt-controller;
-			#interrupt-cells = <2>;
+			#interrupt-cells = <3>;
 			reg = <0x01f00c00 0x400>;
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 		};
@@ -1083,13 +1121,13 @@
 			compatible = "allwinner,sun8i-a83t-r-ccu";
 			reg = <0x01f01400 0x400>;
 			clocks = <&osc24M>, <&osc16Md512>, <&osc16M>,
-				 <&ccu 6>;
+				 <&ccu CLK_PLL_PERIPH>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		r_cpucfg@1f01c00 {
+		cpucfg@1f01c00 {
 			compatible = "allwinner,sun8i-a83t-r-cpucfg";
 			reg = <0x1f01c00 0x400>;
 		};
@@ -1110,6 +1148,7 @@
 		r_lradc: lradc@1f03c00 {
 			compatible = "allwinner,sun8i-a83t-r-lradc";
 			reg = <0x01f03c00 0x100>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
@@ -1117,6 +1156,7 @@
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-a83t-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
 				 <&osc16Md512>;
@@ -1153,5 +1193,82 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
+
+		ths: thermal-sensor@1f04000 {
+			compatible = "allwinner,sun8i-a83t-ths";
+			reg = <0x01f04000 0x100>;
+			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu0_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1_thermal: cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+
+			trips {
+				cpu1_hot: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_very_hot: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_hot>;
+					cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 2>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
new file mode 100644
index 000000000000..d3a7c9fa23e4
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * Based on sun8i-h3-bananapi-m2-plus.dts, which is:
+ *   Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Banana Pi BPI-M2-Zero";
+	compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "bananapi-m2-zero:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
+			default-state = "on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		switch-4 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	reg_vcc1v2: vcc1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	poweroff {
+		compatible = "regulator-poweroff";
+		cpu-supply = <&reg_vcc1v2>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	/*
+	 * On the production batch of this board the card detect GPIO is
+	 * high active (card inserted), although on the early samples it's
+	 * low active.
+	 */
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <1500000>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+		host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	};
+
+};
+
+&pio {
+	gpio-line-names =
+		/* PA */
+		"CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15",
+			"CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29",
+		"CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05",
+			"CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16",
+		"CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27",
+			"CON2-P40", "CON2-P38", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PB */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PC */
+		"CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24",
+			"CON2-P18", "", "", "CON2-P26",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PD */
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "CSI-PWR-EN", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PE */
+		"CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07",
+			"CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20",
+		"CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12",
+			"CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PF */
+		"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+			"SDC0-D2", "SDC0-DET", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+
+		/* PG */
+		"WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1",
+			"WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX",
+		"BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP",
+			"BT-RST-N", "AP-WAKE-BT", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&r_pio {
+	gpio-line-names =
+		/* PL */
+		"", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36",
+			"VCC-IO-EN", "USB0-ID", "WL-PWR-EN",
+		"PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+	/*
+	 * There're two micro-USB connectors, one is power-only and another is
+	 * OTG. The Vbus of these two connectors are connected together, so
+	 * the external USB device will be powered just by the power input
+	 * from the power-only USB port.
+	 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
index 4db0d4bb65eb..4db0d4bb65eb 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-libretech-all-h3-cc.dts
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
index 3356f4210d45..79b03b31c5eb 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-r1.dts
@@ -43,11 +43,12 @@
 /* Orange Pi R1 is based on Orange Pi Zero design */
 #include "sun8i-h2-plus-orangepi-zero.dts"
 
+/delete-node/ &reg_vcc_wifi;
+
 / {
 	model = "Xunlong Orange Pi R1";
 	compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus";
 
-	/delete-node/ reg_vcc_wifi;
 
 	/*
 	 * Ths pin of this regulator is the same with the Wi-Fi extra
@@ -89,7 +90,7 @@
 	vmmc-supply = <&reg_vcc3v3>;
 	vqmmc-supply = <&reg_vcc3v3>;
 
-	rtl8189etv: sdio_wifi@1 {
+	rtl8189etv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
index f19ed981da9d..b23cec5b89eb 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
@@ -80,7 +80,7 @@
 		};
 	};
 
-	reg_vcc_wifi: reg_vcc_wifi {
+	reg_vcc_wifi: reg-vcc-wifi {
 		compatible = "regulator-fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -105,13 +105,27 @@
 		states = <1100000 0>, <1300000 1>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
 		post-power-on-delay-ms = <200>;
 	};
 };
 
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - https://linux-sunxi.org/Xunlong_Orange_Pi_Zero#Expansion_Port
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_vdd_cpux>;
 };
@@ -149,7 +163,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	xr819: sdio_wifi@1 {
+	xr819: wifi@1 {
 		reg = <1>;
 	};
 };
@@ -169,7 +183,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
+		compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 	};
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
index fc4a8c3d084d..fc4a8c3d084d 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus-v1.2.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
index 195a75da13f1..195a75da13f1 100644
--- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-bananapi-m2-plus.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
index ac9e26b1d906..5b77300307de 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-beelink-x2.dts
@@ -57,6 +57,12 @@
 		ethernet1 = &sdiowifi;
 	};
 
+	cec {
+		compatible = "cec-gpio";
+		cec-gpios = <&pio 0 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PA14 */
+		hdmi-phandle = <&hdmi>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -75,23 +81,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "beelink-x2:blue:pwr";
 			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
 			default-state = "on";
 		};
 
-		red {
+		led-1 {
 			label = "beelink-x2:red:standby";
 			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
-		clock-names = "ext_clock";
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
 	};
 
 	sound_spdif {
@@ -111,6 +121,13 @@
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
 	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
 };
 
 &de {
@@ -143,6 +160,7 @@
 };
 
 &ir {
+	linux,rc-map-name = "rc-tanix-tx3mini";
 	pinctrl-names = "default";
 	pinctrl-0 = <&r_ir_rx_pin>;
 	status = "okay";
@@ -167,7 +185,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	sdiowifi: sdio_wifi@1 {
+	sdiowifi: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
new file mode 100644
index 000000000000..02fbe00cde97
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3-devboard.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgiii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3-emlid-neutis-n5h3.dtsi"
+
+/ {
+	model = "Emlid Neutis N5H3 Developer board";
+	compatible = "emlid,neutis-n5h3-devboard",
+		     "emlid,neutis-n5h3",
+		     "allwinner,sun8i-h3";
+
+	vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>, <1300000 0x1>;
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&codec {
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
new file mode 100644
index 000000000000..35e71f46c197
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-emlid-neutis-n5h3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+#include "sunxi-h3-h5-emlid-neutis.dtsi"
diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
index a8b2f0f1c11d..a8b2f0f1c11d 100644
--- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-libretech-all-h3-cc.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
index ff0a7a952e0c..f5c8ccc5b872 100644
--- a/arch/arm/boot/dts/sun8i-h3-mapleboard-mp130.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-mapleboard-mp130.dts
@@ -39,16 +39,16 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
 		};
 
-		user {
+		key-user {
 			label = "user";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
new file mode 100644
index 000000000000..2b0566d4b386
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-duo2.dts
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Karl Palsson <karlp@tweak.net.au>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "FriendlyARM NanoPi Duo2";
+	compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "nanopi:red:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "nanopi:green:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "k1";
+			linux,code = <BTN_0>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; /* PL3 */
+		};
+	};
+
+	reg_vdd_cpux: vdd-cpux-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-ramp-delay = <50>; /* 4ms */
+
+		enable-active-high;
+		enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0>, <1300000 1>;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	reg_vdd_sys: vdd-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-sys";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		vin-supply = <&reg_vcc5v0>;
+        };
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	sdio_wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>, <&uart2_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
index 4ba533b0340f..59bd0746acf8 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1-plus.dts
@@ -62,7 +62,7 @@
 		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 	};
@@ -132,7 +132,7 @@
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
index 69243dcb30a6..69243dcb30a6 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-m1.dts
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
index 07867a0d569b..9a2742363cd0 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
@@ -61,19 +61,19 @@
 	leds {
 		compatible = "gpio-leds";
 
-		pwr {
+		led-0 {
 			label = "nanopi:green:pwr";
 			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
 			default-state = "on";
 		};
 
-		status {
+		led-1 {
 			label = "nanopi:blue:status";
 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 	};
@@ -94,7 +94,7 @@
 	non-removable;
 	status = "okay";
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 		interrupt-parent = <&pio>;
@@ -103,12 +103,40 @@
 	};
 };
 
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
 &usbphy {
 	/* USB VBUS is always on */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
index 9f33f6fae595..df71fab3cf4e 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
@@ -45,6 +45,10 @@
 / {
 	model = "FriendlyARM NanoPi NEO";
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
 };
 
 &ehci0 {
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
new file mode 100644
index 000000000000..870649760f70
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-r1.dts
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
+ * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com>
+*/
+
+#include "sun8i-h3-nanopi.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "FriendlyARM NanoPi R1";
+	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
+
+	aliases {
+		serial1 = &uart1;
+		ethernet0 = &emac;
+		ethernet1 = &wifi;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+
+	reg_vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-ramp-delay = <50>;
+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+		gpios-states = <0x1>;
+		states = <1100000 0x0>,
+			 <1300000 0x1>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+
+	leds {
+		led-2 {
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+		};
+
+		led-3 {
+			function = LED_FUNCTION_LAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; /* PA9 */
+		};
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
index 4df29a65316d..cf8413fba6c1 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi.dtsi
@@ -60,27 +60,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-0 {
 			label = "nanopi:blue:status";
 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		pwr {
+		led-1 {
 			label = "nanopi:green:pwr";
 			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		input-name = "k1";
 
-		k1 {
+		key-0 {
 			label = "k1";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
index 597c425d08ec..d2ae47b074bf 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-2.dts
@@ -88,23 +88,24 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw2 {
+		switch-2 {
 			label = "sw2";
 			linux,code = <BTN_1>;
 			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
 		};
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
 	};
@@ -168,7 +169,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189: sdio_wifi@1 {
+	rtl8189: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
index 6f9c97add54e..6a4316a52469 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-lite.dts
@@ -87,10 +87,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
@@ -143,7 +143,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
index 4759ba3f2986..59f6f6d5e7ca 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-one.dts
@@ -86,10 +86,10 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
 			linux,code = <BTN_0>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
index 71fb73208939..8a49b3376dfc 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc-plus.dts
@@ -53,11 +53,6 @@
 	};
 };
 
-&emac {
-	/* LEDs changed to active high on the plus */
-	/delete-property/ allwinner,leds-active-low;
-};
-
 &mmc1 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -68,7 +63,7 @@
 	 * Explicitly define the sdio device, so that we can add an ethernet
 	 * alias for it (which e.g. makes u-boot set a mac-address).
 	 */
-	rtl8189ftv: sdio_wifi@1 {
+	rtl8189ftv: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
index 5aff8ecc66cb..b96e015f54ee 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-pc.dts
@@ -86,13 +86,14 @@
 		};
 	};
 
-	r_gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "sw4";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
index 97f497854e05..d05fa679dcd3 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus.dts
@@ -85,7 +85,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
index 6dbf7b2e0c13..b6ca45d18e51 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-plus2e.dts
@@ -67,7 +67,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
index b8f46e2802fd..97a3565ac7a8 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
@@ -70,6 +70,21 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	reg_vcc3v3: vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
@@ -77,17 +92,35 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
 		post-power-on-delay-ms = <200>;
 	};
 };
 
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
 &de {
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 };
@@ -132,8 +165,27 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
+
+&usb_otg {
+	/*
+	 * According to schematics CN1 MicroUSB port can be used to take
+	 * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+	 * port cannot provide power externally even if the board is powered
+	 * via GPIO pins. It thus makes sense to force peripheral mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
index 4738f3a9efe4..4738f3a9efe4 100644
--- a/arch/arm/boot/dts/sun8i-h3-rervision-dvk.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-rervision-dvk.dts
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
new file mode 100644
index 000000000000..7d3e7323b661
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-zeropi.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyARM ZeroPi";
+	compatible = "friendlyarm,zeropi", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii-id";
+
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
new file mode 100644
index 000000000000..cfd039840b43
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3.dtsi
@@ -0,0 +1,335 @@
+/*
+ * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-h3-h5.dtsi"
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000 1040000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1300000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 <&ccu CLK_DRAM_DEINTERLACE>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0x80000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-h3-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-h3-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-h3-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
+		ths: thermal-sensor@1c25000 {
+			compatible = "allwinner,sun8i-h3-ths";
+			reg = <0x01c25000 0x400>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-h3-ccu";
+};
+
+&display_clocks {
+	compatible = "allwinner,sun8i-h3-de2-clk";
+};
+
+&mbus {
+	compatible = "allwinner,sun8i-h3-mbus";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC0>,
+		 <&ccu CLK_MMC0>,
+		 <&ccu CLK_MMC0_OUTPUT>,
+		 <&ccu CLK_MMC0_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc1 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC1>,
+		 <&ccu CLK_MMC1>,
+		 <&ccu CLK_MMC1_OUTPUT>,
+		 <&ccu CLK_MMC1_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&mmc2 {
+	compatible = "allwinner,sun7i-a20-mmc";
+	clocks = <&ccu CLK_BUS_MMC2>,
+		 <&ccu CLK_MMC2>,
+		 <&ccu CLK_MMC2_OUTPUT>,
+		 <&ccu CLK_MMC2_SAMPLE>;
+	clock-names = "ahb",
+		      "mmc",
+		      "output",
+		      "sample";
+};
+
+&pio {
+	compatible = "allwinner,sun8i-h3-pinctrl";
+};
+
+&rtc {
+	compatible = "allwinner,sun8i-h3-rtc";
+};
+
+&sid {
+	compatible = "allwinner,sun8i-h3-sid";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
new file mode 100644
index 000000000000..e137eefee341
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Devicetree overlay for the Orange Pi Zero Interface board (OP0014).
+ *
+ *   https://orangepi.com/index.php?route=product/product&product_id=871
+ *
+ * This overlay applies to the following base files:
+ *
+ * - arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+ * - arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+ */
+
+/dts-v1/;
+/plugin/;
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
index 3d9a1524e17e..a0f787581dd9 100644
--- a/arch/arm/boot/dts/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
@@ -62,7 +62,7 @@
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		/*
 		 * Q8 boards use various PL# pins as wifi-en. On other boards
@@ -82,7 +82,7 @@
 };
 
 &ehci0 {
-	status  = "okay";
+	status = "okay";
 };
 
 &mmc1 {
@@ -94,7 +94,7 @@
 	non-removable;
 	status = "okay";
 
-	sdio_wifi: sdio_wifi@1 {
+	sdio_wifi: wifi@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
index e1c75f7fa3ca..f4bf46b35bec 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-bananapi-m2m.dts
@@ -64,17 +64,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-0 {
 			label = "bpi-m2m:blue:usr";
 			gpios = <&pio 2 7 GPIO_ACTIVE_LOW>;
 		};
 
-		green {
+		led-1 {
 			label = "bpi-m2m:green:usr";
 			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>;
 		};
 
-		red {
+		led-2 {
 			label = "bpi-m2m:red:power";
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -88,10 +88,10 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -163,8 +163,8 @@
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		x-powers,drive-vbus-en;
 	};
@@ -283,7 +283,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_dldo1>;
 		vddio-supply = <&reg_aldo3>;
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
index 246dec5846a4..246dec5846a4 100644
--- a/arch/arm/boot/dts/sun8i-r16-nintendo-nes-classic.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-nes-classic.dts
diff --git a/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
index 80761d7904ec..80761d7904ec 100644
--- a/arch/arm/boot/dts/sun8i-r16-nintendo-super-nes-classic.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-nintendo-super-nes-classic.dts
diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
index 4f48eec6b2ef..75067522ff59 100644
--- a/arch/arm/boot/dts/sun8i-r16-parrot.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r16-parrot.dts
@@ -64,18 +64,18 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led1 {
+		led-1 {
 			label = "parrot:led1:usr";
-			gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
+			gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
 		};
 
-		led2 {
+		led-2 {
 			label = "parrot:led2:usr";
-			gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+			gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
 		};
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */
 	};
@@ -164,8 +164,8 @@
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;
 	};
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
index 42d62d1ba1dc..cd2351acc32f 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-bananapi-m2-ultra.dts
@@ -43,6 +43,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -99,7 +100,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
 		clocks = <&ccu CLK_OUTA>;
@@ -113,6 +114,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
@@ -129,7 +134,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";
 };
@@ -164,6 +169,10 @@
 
 #include "axp22x.dtsi"
 
+&ir0 {
+	status = "okay";
+};
+
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;
@@ -223,16 +232,16 @@
 };
 
 &reg_dc1sw {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-gmac-phy";
 };
 
 &reg_dcdc1 {
 	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
new file mode 100644
index 000000000000..649928b361af
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-cpu-opp.dtsi
@@ -0,0 +1,52 @@
+/{
+	cpu0_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1000000 1000000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1100000 1100000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1160000 1160000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1240000 1240000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1300000 1300000 1300000>;
+			clock-latency-ns = <2000000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
new file mode 100644
index 000000000000..c12361d0317f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-feta40i.dtsi
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//  Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+//  Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic@34 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&mmc2 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_aldo2>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clk_out_a_pin>;
+	vcc-pa-supply = <&reg_dcdc1>;
+	vcc-pc-supply = <&reg_aldo2>;
+	vcc-pd-supply = <&reg_dcdc1>;
+	vcc-pf-supply = <&reg_dldo4>;
+	vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3-tv-usb";
+};
+
+&reg_aldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vcc-pa";
+};
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1100000>;
+	regulator-max-microvolt = <1100000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo4 {
+	regulator-always-on;
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo2 {
+	regulator-min-microvolt = <1200000>;
+	regulator-max-microvolt = <1200000>;
+	regulator-name = "vdd1v2-sata";
+};
+
+&reg_eldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "vcc-pe";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
new file mode 100644
index 000000000000..15b0b4de626a
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40-oka40i-c.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+// Copyright (C) 2021 Ivan Uvarov <i.uvarov@cognitivepilot.com>
+// Based on the sun8i-r40-bananapi-m2-ultra.dts, which is:
+//	Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+//	Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+/dts-v1/;
+#include "sun8i-r40-feta40i.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Forlinx OKA40i-C";
+	compatible = "forlinx,oka40i-c", "forlinx,feta40i-c", "allwinner,sun8i-r40";
+
+	aliases {
+		ethernet0 = &gmac;
+		serial0 = &uart0;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5; /* RS485 */
+		serial7 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5 { /* this is how the leds are labeled on the board */
+			gpios = <&pio 7 26 GPIO_ACTIVE_LOW>; /* PH26 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led-6 {
+			gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; // PB10 WIFI_EN
+		clocks = <&ccu CLK_OUTA>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ahci {
+	ahci-supply = <&reg_dldo4>;
+	phy-supply = <&reg_eldo2>;
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_rgmii_pins>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_dcdc1>;
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 11 GPIO_ACTIVE_LOW>; // PI11
+	status = "okay";
+};
+
+&mmc3 {
+	vmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 8 10 GPIO_ACTIVE_LOW>; // PI10
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&reg_dc1sw {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-lcd";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&tcon_tv0 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_rts_cts_pi_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pg_pins>;
+	status = "okay";
+};
+
+&uart5 { /* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_ph_pins>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pi_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v0>;
+	usb2_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
new file mode 100644
index 000000000000..f0ed802a9d08
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
@@ -0,0 +1,1328 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
+ * Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+#include <dt-bindings/clock/sun8i-r40-ccu.h>
+#include <dt-bindings/clock/sun8i-tcon-top.h>
+#include <dt-bindings/reset/sun8i-r40-ccu.h>
+#include <dt-bindings/reset/sun8i-de2.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <20000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&ccu CLK_CPU>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-r40-display-engine";
+		allwinner,pipelines = <&mixer0>, <&mixer1>;
+		status = "disabled";
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu0-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-r40-de2-clk",
+				     "allwinner,sun8i-h3-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-0";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER0>,
+				 <&display_clocks CLK_MIXER0>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_MIXER0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+					mixer0_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		mixer1: mixer@1200000 {
+			compatible = "allwinner,sun8i-r40-de2-mixer-1";
+			reg = <0x01200000 0x100000>;
+			clocks = <&display_clocks CLK_BUS_MIXER1>,
+				 <&display_clocks CLK_MIXER1>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks RST_WB>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer1_out: port@1 {
+					reg = <1>;
+					mixer1_out_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_mixer1_in_mixer1>;
+					};
+				};
+			};
+		};
+
+		deinterlace: deinterlace@1400000 {
+			compatible = "allwinner,sun8i-r40-deinterlace",
+				     "allwinner,sun8i-h3-deinterlace";
+			reg = <0x01400000 0x20000>;
+			clocks = <&ccu CLK_BUS_DEINTERLACE>,
+				 <&ccu CLK_DEINTERLACE>,
+				 /*
+				  * NOTE: Contrary to what datasheet claims,
+				  * DRAM deinterlace gate doesn't exist and
+				  * it's shared with CSI1.
+				  */
+				 <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_DEINTERLACE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&mbus 9>;
+			interconnect-names = "dma-mem";
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-r40-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun8i-r40-sram-c1",
+						     "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		nmi_intc: interrupt-controller@1c00030 {
+			compatible = "allwinner,sun7i-a20-sc-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c00030 0x0c>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-r40-dma",
+				     "allwinner,sun50i-a64-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			dma-channels = <16>;
+			dma-requests = <31>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		csi0: csi@1c09000 {
+			compatible = "allwinner,sun8i-r40-csi0",
+				     "allwinner,sun7i-a20-csi0";
+			reg = <0x01c09000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI0>, <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI0>;
+			clock-names = "bus", "isp", "ram";
+			resets = <&ccu RST_BUS_CSI0>;
+			interconnects = <&mbus 5>;
+			interconnect-names = "dma-mem";
+			status = "disabled";
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun8i-r40-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+			<&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+			interconnects = <&mbus 4>;
+			interconnect-names = "dma-mem";
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc0_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun8i-r40-emmc",
+				     "allwinner,sun50i-a64-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc2_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun8i-r40-mmc",
+				     "allwinner,sun50i-a64-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC3>;
+			reset-names = "ahb";
+			pinctrl-0 = <&mmc3_pins>;
+			pinctrl-names = "default";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,sun8i-r40-usb-phy";
+			reg = <0x01c13400 0x14>,
+			      <0x01c14800 0x4>,
+			      <0x01c19800 0x4>,
+			      <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1",
+				    "pmu2";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>,
+				 <&ccu CLK_USB_PHY2>;
+			clock-names = "usb0_phy",
+				      "usb1_phy",
+				      "usb2_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset",
+				      "usb1_reset",
+				      "usb2_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		crypto: crypto@1c15000 {
+			compatible = "allwinner,sun8i-r40-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_CE>;
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun8i-r40-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+			resets = <&ccu RST_BUS_SATA>;
+			reset-names = "ahci";
+			status = "disabled";
+		};
+
+		ehci1: usb@1c19000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c19000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI1>;
+			resets = <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c19400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c19400 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ehci2: usb@1c1c000 {
+			compatible = "allwinner,sun8i-r40-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI2>;
+			resets = <&ccu RST_BUS_EHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@1c1c400 {
+			compatible = "allwinner,sun8i-r40-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI2>,
+				 <&ccu CLK_USB_OHCI2>;
+			resets = <&ccu RST_BUS_OHCI2>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun8i-r40-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-r40-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			compatible = "allwinner,sun8i-r40-rtc";
+			reg = <0x01c20400 0x400>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out";
+			clocks = <&osc32k>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-r40-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			can_ph_pins: can-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			can_pa_pins: can-pa-pins {
+				pins = "PA16", "PA17";
+				function = "can";
+			};
+
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
+			/omit-if-no-ref/
+			csi0_8bits_pins: csi0-8bits-pins {
+				pins = "PE0", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10",
+				       "PE11";
+				function = "csi0";
+			};
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE1";
+				function = "csi0";
+			};
+
+			gmac_rgmii_pins: gmac-rgmii-pins {
+				pins = "PA0", "PA1", "PA2", "PA3",
+				       "PA4", "PA5", "PA6", "PA7",
+				       "PA8", "PA10", "PA11", "PA12",
+				       "PA13", "PA15", "PA16";
+				function = "gmac";
+				/*
+				 * data lines in RGMII mode use DDR mode
+				 * and need a higher signal drive strength
+				 */
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			i2c3_pins: i2c3-pins {
+				pins = "PI0", "PI1";
+				function = "i2c3";
+			};
+
+			i2c4_pins: i2c4-pins {
+				pins = "PI2", "PI3";
+				function = "i2c4";
+			};
+
+			ir0_pins: ir0-pins {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir1_pins: ir1-pins {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pg_pins: mmc1-pg-pins {
+				pins = "PG0", "PG1", "PG2",
+				       "PG3", "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC5", "PC6", "PC7", "PC8", "PC9",
+				       "PC10", "PC11", "PC12", "PC13", "PC14",
+				       "PC15", "PC24";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc3_pins: mmc3-pins {
+				pins = "PI4", "PI5", "PI6",
+				       "PI7", "PI8", "PI9";
+				function = "mmc3";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pc_pin: spi0-cs0-pc-pin {
+				pins = "PC23";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pi_pins: spi1-pi-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pi_pin: spi1-cs0-pi-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs1_pi_pin: spi1-cs1-pi-pin {
+				pins = "PI15";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart2_pi_pins: uart2-pi-pins {
+				pins = "PI18", "PI19";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins {
+				pins = "PI16", "PI17";
+				function = "uart2";
+			};
+
+			/omit-if-no-ref/
+			uart3_pg_pins: uart3-pg-pins {
+				pins = "PG6", "PG7";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins {
+				pins = "PG8", "PG9";
+				function = "uart3";
+			};
+
+			/omit-if-no-ref/
+			uart4_pg_pins: uart4-pg-pins {
+				pins = "PG10", "PG11";
+				function = "uart4";
+			};
+
+			/omit-if-no-ref/
+			uart5_ph_pins: uart5-ph-pins {
+				pins = "PH6", "PH7";
+				function = "uart5";
+			};
+
+			/omit-if-no-ref/
+			uart7_pi_pins: uart7-pi-pins {
+				pins = "PI20", "PI21";
+				function = "uart7";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21800 0x400>;
+			pinctrl-0 = <&ir0_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR0>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun8i-r40-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c21c00 0x400>;
+			pinctrl-0 = <&ir1_pins>;
+			pinctrl-names = "default";
+			clocks = <&ccu CLK_BUS_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_IR1>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S0>;
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s1: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S1>;
+			dmas = <&dma 4>, <&dma 4>;
+			dma-names = "rx", "tx";
+		};
+
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-r40-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			resets = <&ccu RST_BUS_I2S2>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+		};
+
+		ths: thermal-sensor@1c24c00 {
+			compatible = "allwinner,sun8i-r40-ths";
+			reg = <0x01c24c00 0x100>;
+			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
+			clock-names = "bus", "mod";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_THS>;
+			/* TODO: add nvmem-cells for calibration */
+			#thermal-sensor-cells = <1>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART6>;
+			resets = <&ccu RST_BUS_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART7>;
+			resets = <&ccu RST_BUS_UART7>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@1c2b800 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b800 0x400>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun8i-r40-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CAN>;
+			resets = <&ccu RST_BUS_CAN>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@1c2c000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2c000 0x400>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			pinctrl-0 = <&i2c4_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun8i-r40-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pmu";
+			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_BUS_GPU>;
+		};
+
+		gmac: ethernet@1c50000 {
+			compatible = "allwinner,sun8i-r40-gmac";
+			syscon = <&ccu>;
+			reg = <0x01c50000 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_GMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_GMAC>;
+			clock-names = "stmmaceth";
+			status = "disabled";
+
+			gmac_mdio: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		mbus: dram-controller@1c62000 {
+			compatible = "allwinner,sun8i-r40-mbus";
+			reg = <0x01c62000 0x1000>;
+			clocks = <&ccu 155>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0x80000000>;
+			#interconnect-cells = <1>;
+		};
+
+		tcon_top: tcon-top@1c70000 {
+			compatible = "allwinner,sun8i-r40-tcon-top";
+			reg = <0x01c70000 0x1000>;
+			clocks = <&ccu CLK_BUS_TCON_TOP>,
+				 <&ccu CLK_TCON_TV0>,
+				 <&ccu CLK_TVE0>,
+				 <&ccu CLK_TCON_TV1>,
+				 <&ccu CLK_TVE1>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus",
+				      "tcon-tv0",
+				      "tve0",
+				      "tcon-tv1",
+				      "tve1",
+				      "dsi";
+			clock-output-names = "tcon-top-tv0",
+					     "tcon-top-tv1",
+					     "tcon-top-dsi";
+			resets = <&ccu RST_BUS_TCON_TOP>;
+			#clock-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_top_mixer0_in: port@0 {
+					reg = <0>;
+
+					tcon_top_mixer0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_top_mixer0_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer0_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>;
+					};
+
+					tcon_top_mixer0_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>;
+					};
+				};
+
+				tcon_top_mixer1_in: port@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					tcon_top_mixer1_in_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&mixer1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_mixer1_out: port@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					tcon_top_mixer1_out_tcon_lcd0: endpoint@0 {
+						reg = <0>;
+					};
+
+					tcon_top_mixer1_out_tcon_lcd1: endpoint@1 {
+						reg = <1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv0: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>;
+					};
+
+					tcon_top_mixer1_out_tcon_tv1: endpoint@3 {
+						reg = <3>;
+						remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>;
+					};
+				};
+
+				tcon_top_hdmi_in: port@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+
+					tcon_top_hdmi_in_tcon_tv0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_tv0_out_tcon_top>;
+					};
+
+					tcon_top_hdmi_in_tcon_tv1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_tv1_out_tcon_top>;
+					};
+				};
+
+				tcon_top_hdmi_out: port@5 {
+					reg = <5>;
+
+					tcon_top_hdmi_out_hdmi: endpoint {
+						remote-endpoint = <&hdmi_in_tcon_top>;
+					};
+				};
+			};
+		};
+
+		tcon_tv0: lcd-controller@1c73000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c73000 0x1000>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top CLK_TCON_TOP_TV0>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv0_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;
+					};
+
+					tcon_tv0_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>;
+					};
+				};
+
+				tcon_tv0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv0_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;
+					};
+				};
+			};
+		};
+
+		tcon_tv1: lcd-controller@1c74000 {
+			compatible = "allwinner,sun8i-r40-tcon-tv";
+			reg = <0x01c74000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top CLK_TCON_TOP_TV1>;
+			clock-names = "ahb", "tcon-ch1";
+			resets = <&ccu RST_BUS_TCON_TV1>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon_tv1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon_tv1_in_tcon_top_mixer0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>;
+					};
+
+					tcon_tv1_in_tcon_top_mixer1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>;
+					};
+				};
+
+				tcon_tv1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon_tv1_out_tcon_top: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>;
+					};
+				};
+			};
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		hdmi: hdmi@1ee0000 {
+			compatible = "allwinner,sun8i-r40-dw-hdmi",
+				     "allwinner,sun8i-a83t-dw-hdmi";
+			reg = <0x01ee0000 0x10000>;
+			reg-io-width = <1>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
+			resets = <&ccu RST_BUS_HDMI1>;
+			reset-names = "ctrl";
+			phys = <&hdmi_phy>;
+			phy-names = "phy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					reg = <0>;
+
+					hdmi_in_tcon_top: endpoint {
+						remote-endpoint = <&tcon_top_hdmi_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		hdmi_phy: hdmi-phy@1ef0000 {
+			compatible = "allwinner,sun8i-r40-hdmi-phy";
+			reg = <0x01ef0000 0x10000>;
+			clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>,
+				 <&ccu CLK_PLL_VIDEO0>, <&ccu CLK_PLL_VIDEO1>;
+			clock-names = "bus", "mod", "pll-0", "pll-1";
+			resets = <&ccu RST_BUS_HDMI0>;
+			reset-names = "phy";
+			#phy-cells = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
index b3d8b8f056cd..872d56caa9ce 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-reference-design-tablet.dtsi
@@ -54,6 +54,7 @@
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
 		enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
+		power-supply = <&reg_dc1sw>;
 	};
 
 	chosen {
@@ -92,8 +93,8 @@
 	axp22x: pmic@3a3 {
 		compatible = "x-powers,axp223";
 		reg = <0x3a3>;
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
 		eldoin-supply = <&reg_dcdc1>;
 		drivevbus-supply = <&reg_vcc5v0>;
 		x-powers,drive-vbus-en;
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
new file mode 100644
index 000000000000..052b010a5607
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-impetus.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Elimo Impetus SoM";
+	compatible = "elimo,impetus", "sochip,s3", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
new file mode 100644
index 000000000000..039677c2cc65
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-elimo-initium.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Matteo Scordino <matteo@elimo.io>
+ */
+
+/dts-v1/;
+#include "sun8i-s3-elimo-impetus.dtsi"
+
+/ {
+	model = "Elimo Initium";
+	compatible = "elimo,initium", "elimo,impetus", "sochip,s3",
+		     "allwinner,sun8i-v3";
+
+	aliases {
+		serial1 = &uart1;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
index d18192d51d1b..d18192d51d1b 100644
--- a/arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-lichee-zero-plus.dts
diff --git a/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
new file mode 100644
index 000000000000..e0d4404b5957
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-s3-pinecube.dts
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2019 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "sun8i-v3.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "PineCube IP Camera";
+	compatible = "pine64,pinecube", "sochip,s3", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "pine64:ir:led1";
+			gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
+		};
+
+		led2 {
+			label = "pine64:ir:led2";
+			gpios = <&pio 1 12 GPIO_ACTIVE_LOW>; /* PB12 */
+		};
+	};
+
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_wifi: vcc-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 1 2 GPIO_ACTIVE_LOW>; /* PB2 WIFI-EN */
+		vin-supply = <&reg_dcdc3>;
+		startup-delay-us = <200000>;
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 WIFI-RST */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&csi1_8bit_pins>;
+	status = "okay";
+
+	port {
+		csi1_ep: endpoint {
+			remote-endpoint = <&ov5640_ep>;
+			bus-width = <8>;
+			hsync-active = <1>; /* Active high */
+			vsync-active = <0>; /* Active low */
+			data-active = <1>;  /* Active high */
+			pclk-sample = <1>;  /* Rising */
+		};
+	};
+};
+
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pe_pins>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&csi1_mclk_pin>;
+		clocks = <&ccu CLK_CSI1_MCLK>;
+		clock-names = "xclk";
+
+		AVDD-supply = <&reg_ldo3>;
+		DOVDD-supply = <&reg_ldo3>;
+		DVDD-supply = <&reg_ldo4>;
+		reset-gpios = <&pio 4 23 GPIO_ACTIVE_LOW>; /* PE23 */
+		powerdown-gpios = <&pio 4 24 GPIO_ACTIVE_HIGH>; /* PE24 */
+
+		port {
+			ov5640_ep: endpoint {
+				remote-endpoint = <&csi1_ep>;
+				bus-width = <8>;
+				hsync-active = <1>; /* Active high */
+				vsync-active = <0>; /* Active low */
+				data-active = <1>;  /* Active high */
+				pclk-sample = <1>;  /* Rising */
+			};
+		};
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-200 {
+		label = "Setup";
+		linux,code = <KEY_SETUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc_wifi>;
+	vqmmc-supply = <&reg_dcdc3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_dcdc3>;
+	vcc-pe-supply = <&reg_ldo3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-sys-cpu-ephy";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-dovdd-2v8-csi";
+	regulator-soft-start;
+	regulator-ramp-delay = <1600>;
+};
+
+&reg_ldo4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "dvdd-1v8-csi";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_vcc5v0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
new file mode 100644
index 000000000000..8b3a75383816
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-mangopi-mq-r-t113.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/dts-v1/;
+
+#include "sun8i-t113s.dtsi"
+#include "sunxi-d1s-t113-mangopi-mq-r.dtsi"
+
+/ {
+	model = "MangoPi MQ-R-T113";
+	compatible = "widora,mangopi-mq-r-t113", "allwinner,sun8i-t113s";
+
+	aliases {
+		ethernet0 = &rtl8189ftv;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&mmc1 {
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 = WL_WAKE_AP */
+		interrupt-names = "host-wake";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
new file mode 100644
index 000000000000..5262102a85f6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+/ {
+	model = "NetCube Systems Nagami Basic Carrier Board";
+	compatible = "netcube,nagami-basic-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	broken-cd;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
new file mode 100644
index 000000000000..4ffa6a0216d8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "NetCube Systems Nagami Keypad Carrier Board";
+	compatible = "netcube,nagami-keypad-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: led-status-red {
+			gpios = <&pio 3 16 GPIO_ACTIVE_HIGH>;  /* PD16 */
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_status_green: led-status-green {
+			gpios = <&pio 3 22 GPIO_ACTIVE_HIGH>;  /* PD22 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		reg = <0x34>;
+		interrupts-extended = <&pio 5 6 IRQ_TYPE_EDGE_FALLING>;  /* PF6 */
+		linux,keymap = <MATRIX_KEY(0x03, 0x00, KEY_NUMERIC_A)
+				MATRIX_KEY(0x03, 0x01, KEY_NUMERIC_1)
+				MATRIX_KEY(0x03, 0x02, KEY_NUMERIC_2)
+				MATRIX_KEY(0x03, 0x03, KEY_NUMERIC_3)
+				MATRIX_KEY(0x02, 0x00, KEY_NUMERIC_B)
+				MATRIX_KEY(0x02, 0x01, KEY_NUMERIC_4)
+				MATRIX_KEY(0x02, 0x02, KEY_NUMERIC_5)
+				MATRIX_KEY(0x02, 0x03, KEY_NUMERIC_6)
+				MATRIX_KEY(0x01, 0x00, KEY_NUMERIC_C)
+				MATRIX_KEY(0x01, 0x01, KEY_NUMERIC_7)
+				MATRIX_KEY(0x01, 0x02, KEY_NUMERIC_8)
+				MATRIX_KEY(0x01, 0x03, KEY_NUMERIC_9)
+				MATRIX_KEY(0x00, 0x00, KEY_NUMERIC_D)
+				MATRIX_KEY(0x00, 0x01, KEY_CLEAR)
+				MATRIX_KEY(0x00, 0x02, KEY_NUMERIC_0)
+				MATRIX_KEY(0x00, 0x03, KEY_OK)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+};
+
+&pio {
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PB
+			  "", "", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "", "",
+			  "", "", "", "",
+			  "LED_STATUS_RED", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "LED_STATUS_GREEN", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PF
+			  "", "", "KEY_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
new file mode 100644
index 000000000000..544d60cfc32e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NetCube Systems Nagami SoM";
+	compatible = "netcube,nagami", "allwinner,sun8i-t113s";
+
+	aliases {
+		serial1 = &uart1; // ESP32 Bootloader UART
+		serial3 = &uart3; // Console UART on Card Edge
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	/* module wide 3.3V supply directly from the card edge */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	/* USB0 MUX to switch connect to Card-Edge only after BootROM */
+	usb0_sec_mux: mux-controller{
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&pio 3 9 GPIO_ACTIVE_HIGH>; /* PD9 */
+		idle-state = <1>; /* USB connected to Card-Edge by default */
+	};
+
+	/* Reset of ESP32 */
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		post-power-on-delay-ms = <1500>;
+		power-off-delay-us = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&emac {
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	phy-handle = <&lan8720a>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&rmii_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Default I2C Interface on Card-Edge */
+&i2c2 {
+	pinctrl-0 = <&i2c2_pd_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Exposed as the QWIIC connector and used by the internal EEPROM */
+&i2c3 {
+	pinctrl-0 = <&i2c3_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+};
+
+/* Default I2S Interface on Card-Edge */
+&i2s1 {
+	pinctrl-0 = <&i2s1_pins>, <&i2s1_din0_pin>, <&i2s1_dout0_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Phy is on SoM. MDI signals pre-magnetics are on the card edge */
+&mdio {
+	lan8720a: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+/* Default SD Interface on Card-Edge */
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+/* Connected to the on-board eMMC */
+&mmc2 {
+	pinctrl-0 = <&mmc2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "CAN0_TX", "CAN0_RX", // PB
+			  "CAN1_TX", "CAN1_RX", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "SPI1_CS", "SPI1_CLK",
+			  "SPI1_MOSI", "SPI1_MISO", "SPI1_HOLD", "SPI1_WP",
+			  "PD16", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "PD22", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CLK", // PF
+			  "SD_D3", "SD_D2", "PF6", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "I2S1_WS", "I2S1_CLK", "I2S1_DIN0", "I2S1_DOUT0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Remove the unused CK pin from the pinctl as it is unconnected */
+&rmii_pe_pins {
+	pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+	       "PE5", "PE6", "PE8", "PE9";
+};
+
+/* Default SPI Interface on Card-Edge */
+&spi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&spi1_pins>, <&spi1_hold_pin>, <&spi1_wp_pin>;
+	pinctrl-names = "default";
+	cs-gpios = <0>;
+	status = "disabled";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pg6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Console/Debug UART on Card-Edge */
+&uart3 {
+	pinctrl-0 = <&uart3_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
new file mode 100644
index 000000000000..c7181308ae6f
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+
+#define SOC_PERIPHERAL_IRQ(nr) GIC_SPI nr
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <riscv/allwinner/sunxi-d1s-t113.dtsi>
+#include <riscv/allwinner/sunxi-d1-t113.dtsi>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&ccu CLK_CPUX>;
+			clock-names = "cpu";
+		};
+	};
+
+	gic: interrupt-controller@1c81000 {
+		compatible = "arm,gic-400";
+		reg = <0x03021000 0x1000>,
+		      <0x03022000 0x2000>,
+		      <0x03024000 0x2000>,
+		      <0x03026000 0x2000>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
index 6931aaab2382..9f472521f4a4 100644
--- a/arch/arm/boot/dts/sun8i-t3-cqa3t-bv3.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-t3-cqa3t-bv3.dts
@@ -45,6 +45,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -88,6 +89,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
new file mode 100644
index 000000000000..117aeece4e55
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631-imx179.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+#include "sun8i-v3-sl631.dtsi"
+
+/ {
+	model = "SL631 Action Camera with IMX179";
+	compatible = "allwinner,sl631-imx179", "allwinner,sl631",
+		     "allwinner,sun8i-v3";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
new file mode 100644
index 000000000000..6f93f8c49f84
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3-sl631.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2020 Paul Kocialkowski <contact@paulk.fr>
+ */
+
+/dts-v1/;
+
+#include "sun8i-v3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SL631 Action Camera";
+	compatible = "allwinner,sl631", "allwinner,sun8i-v3";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pb_pins>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button-174 {
+		label = "Down";
+		linux,code = <KEY_DOWN>;
+		channel = <0>;
+		voltage = <174603>;
+	};
+
+	button-384 {
+		label = "Up";
+		linux,code = <KEY_UP>;
+		channel = <0>;
+		voltage = <384126>;
+	};
+
+	button-593 {
+		label = "OK";
+		linux,code = <KEY_OK>;
+		channel = <0>;
+		voltage = <593650>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	vmmc-supply = <&reg_dcdc3>;
+	status = "okay";
+};
+
+&pio {
+	vcc-pd-supply = <&reg_dcdc3>;
+	vcc-pe-supply = <&reg_dcdc3>;
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1250000>;
+	regulator-max-microvolt = <1250000>;
+	regulator-name = "vdd-sys-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vdd-3v3";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
new file mode 100644
index 000000000000..95bd0b616349
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+#include "sun8i-v3s.dtsi"
+
+/ {
+	soc {
+		i2s0: i2s@1c22000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3-i2s",
+				     "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22000 0x400>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 3>, <&dma 3>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_pins>;
+			resets = <&ccu RST_BUS_I2S0>;
+			status = "disabled";
+		};
+	};
+};
+
+&ccu {
+	compatible = "allwinner,sun8i-v3-ccu";
+};
+
+&codec_analog {
+	compatible = "allwinner,sun8i-v3-codec-analog",
+		     "allwinner,sun8i-h3-codec-analog";
+};
+
+&emac {
+	/delete-property/ phy-handle;
+	/delete-property/ phy-mode;
+};
+
+&mdio_mux {
+	external_mdio: mdio@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&pio {
+	compatible = "allwinner,sun8i-v3-pinctrl";
+
+	i2s0_pins: i2s0-pins {
+		pins = "PG10", "PG11", "PG12", "PG13";
+		function = "i2s";
+	};
+
+	/omit-if-no-ref/
+	lcd_rgb666_pd_pins: lcd-rgb666-pd-pins {
+		pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
+		       "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
+		       "PD12", "PD13", "PD14", "PD15", "PD16", "PD17",
+		       "PD18", "PD19", "PD20", "PD21";
+		function = "lcd";
+	};
+
+	uart1_pg_pins: uart1-pg-pins {
+		pins = "PG6", "PG7";
+		function = "uart1";
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts
new file mode 100644
index 000000000000..f34dfdf1566d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-anbernic-rg-nano.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Anbernic RG Nano";
+	compatible = "anbernic,rg-nano", "allwinner,sun8i-v3s";
+
+	aliases {
+		rtc0 = &pcf8563;
+		rtc1 = &rtc;
+		serial0 = &uart0;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 1 2 3 8 14 21 32 46 60 80 100>;
+		default-brightness-level = <11>;
+		power-supply = <&reg_vcc5v0>;
+		pwms = <&pwm 0 40000 1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-a {
+			gpios = <&gpio_expander 12 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-A";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio_expander 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-B";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio_expander 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-left {
+			gpios = <&gpio_expander 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-right {
+			gpios = <&gpio_expander 0 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-se {
+			gpios = <&gpio_expander 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-st {
+			gpios = <&gpio_expander 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-START";
+			linux,code = <BTN_START>;
+		};
+
+		button-tl {
+			gpios = <&gpio_expander 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-L";
+			linux,code = <BTN_TL>;
+		};
+
+		button-tr {
+			gpios = <&gpio_expander 15 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-R";
+			linux,code = <BTN_TR>;
+		};
+
+		button-up {
+			gpios = <&gpio_expander 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio_expander 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-X";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio_expander 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+			label = "BTN-Y";
+			linux,code = <BTN_WEST>;
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Speaker", "HP",
+				  "MIC1", "Mic",
+				  "Mic", "HBIAS";
+	allwinner,pa-gpios = <&pio 5 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PF6 */
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	gpio_expander: gpio@20 {
+		compatible = "nxp,pcal6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <1 3 IRQ_TYPE_EDGE_BOTH>; /* PB3/EINT3 */
+		vcc-supply = <&reg_vcc3v3>;
+	};
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&pio>;
+		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5/EINT5 */
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&battery_power_supply {
+	status = "okay";
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	spi0_no_miso_pins: spi0-no-miso-pins {
+		pins = "PC1", "PC2", "PC3";
+		function = "spi0";
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_pin>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* DCDC2 wired into vdd-cpu, vdd-sys, and vdd-ephy. */
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-max-microvolt = <1250000>;
+	regulator-min-microvolt = <1250000>;
+	regulator-name = "vdd-cpu";
+};
+
+/* DCDC3 wired into every 3.3v input that isn't the RTC. */
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-max-microvolt = <3300000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-name = "vcc-io";
+};
+
+/* LDO1 wired into RTC, voltage is hard-wired at 3.3v. */
+&reg_ldo1 {
+	regulator-always-on;
+	regulator-name = "vcc-rtc";
+};
+
+/* LDO2 wired into VCC-PLL and audio codec. */
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3000000>;
+	regulator-name = "vcc-pll";
+};
+
+/* LDO3, LDO4, and LDO5 unused. */
+&reg_ldo3 {
+	status = "disabled";
+};
+
+&reg_ldo4 {
+	status = "disabled";
+};
+
+/* RTC uses internal oscillator */
+&rtc {
+	/delete-property/ clocks;
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_no_miso_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	display@0 {
+		compatible = "saef,sftc154b", "panel-mipi-dbi-spi";
+		reg = <0>;
+		backlight = <&backlight>;
+		dc-gpios = <&pio 2 0 GPIO_ACTIVE_HIGH>; /* PC0 */
+		reset-gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+		spi-max-frequency = <100000000>;
+
+		height-mm = <39>;
+		width-mm = <39>;
+
+		/* Set hb-porch to compensate for non-visible area */
+		panel-timing {
+			hactive = <240>;
+			vactive = <240>;
+			hback-porch = <80>;
+			vback-porch = <0>;
+			clock-frequency = <0>;
+			hfront-porch = <0>;
+			hsync-len = <0>;
+			vfront-porch = <0>;
+			vsync-len = <0>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usb_power_supply {
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 6 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG5 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
index db5cd0b8574b..752ad05c8f83 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero-dock.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero-dock.dts
@@ -49,16 +49,18 @@
 	compatible = "licheepi,licheepi-zero-dock", "licheepi,licheepi-zero",
 		     "allwinner,sun8i-v3s";
 
+	aliases {
+		ethernet0 = &emac;
+	};
+
 	leds {
 		/* The LEDs use PG0~2 pins, which conflict with MMC1 */
 		status = "disabled";
 	};
 };
 
-&mmc1 {
-	broken-cd;
-	bus-width = <4>;
-	vmmc-supply = <&reg_vcc3v3>;
+&emac {
+	allwinner,leds-active-low;
 	status = "okay";
 };
 
@@ -94,3 +96,10 @@
 		voltage = <800000>;
 	};
 };
+
+&mmc1 {
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
index 2e4587d26ce5..2e4587d26ce5 100644
--- a/arch/arm/boot/dts/sun8i-v3s-licheepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-licheepi-zero.dts
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
new file mode 100644
index 000000000000..cb6292319f39
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/{
+	model = "NetCube Systems Kumquat";
+	compatible = "netcube,kumquat", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+		rtc0 = &ds3232;
+		rtc1 = &rtc; /* not battery backed */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* 40 MHz Crystal Oscillator on PCB */
+	clk_can0: clock-can0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-user {
+			label = "GPIO Key User";
+			linux,code = <KEY_PROG1>;
+			gpios = <&pio 1 2 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PB2 */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&pio 4 4 GPIO_ACTIVE_HIGH>; /* PE4 */
+			linux,default-trigger = "heartbeat";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-mmc0-act {
+			gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+			linux,default-trigger = "mmc0";
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK;
+		};
+	};
+
+	/* EA3036C Switching 3 Channel Regulator - Channel 2 */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* K7805-1000R3 Switching Regulator supplied from main 12/24V terminal block */
+	reg_vcc5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC1", "Mic",
+		"Mic", "HBIAS";
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+};
+
+&emac {
+	allwinner,leds-active-low;
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+
+	tusb320: typec@60 {
+		compatible = "ti,tusb320";
+		reg = <0x60>;
+		interrupts-extended = <&pio 1 5 IRQ_TYPE_LEVEL_LOW>;  /* PB5 */
+	};
+
+	ds3232: rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+/* Exposed as the Flash/SD Header on the board */
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&osc32k {
+	status = "disabled";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "CAN_nCS", "CAN_nINT", "USER_SW", "PB3", // PB
+			  "USB_ID", "USBC_nINT", "I2C0_SCL", "I2C0_SDA",
+			  "UART0_TX", "UART0_RX", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SPI_MISO", "SPI_SCK", "FLASH_nCS", "SPI_MOSI", // PC
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "Q12", "Q11", "Q10", "Q9", // PE
+			  "LED_SYS0", "I1", "Q1", "Q2",
+			  "I2", "I3", "Q3", "Q4",
+			  "I4", "I5", "Q5", "Q6",
+			  "I6", "I7", "Q7", "Q8",
+			  "I8", "UART1_TXD", "UART1_RXD", "ESP_nRST",
+			  "ESP_nBOOT", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CMD", // PF
+			  "SD_D3", "SD_D2", "LED_SYS1", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Disable external 32k osc as it is broken on current revision */
+&rtc {
+	/delete-property/ clocks;
+};
+
+/* Exposed as a USB-C connector with USB-Serial converter */
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	extcon = <&tusb320 0>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	status = "okay";
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <0>, <&pio 1 0 GPIO_ACTIVE_LOW>; /* PB0 */
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		label = "firmware";
+		spi-max-frequency = <40000000>;
+	};
+
+	can@1 {
+		compatible = "microchip,mcp2518fd";
+		reg = <1>;
+		clocks = <&clk_can0>;
+		interrupts-extended = <&pio 1 1 IRQ_TYPE_LEVEL_LOW>;  /* PB1 */
+		spi-max-frequency = <20000000>;
+		vdd-supply = <&reg_vcc3v3>;
+		xceiver-supply = <&reg_vcc3v3>;
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
new file mode 100644
index 000000000000..fa54510319ac
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s.dtsi
@@ -0,0 +1,671 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/clock/sun8i-de2.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "mixer0-lcd0";
+			clocks = <&display_clocks CLK_MIXER0>,
+				 <&ccu CLK_TCON0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun8i-v3s-display-engine";
+		allwinner,pipelines = <&mixer0>;
+		status = "disabled";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k-clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-accuracy = <50000>;
+			clock-output-names = "ext-osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		display_clocks: clock@1000000 {
+			compatible = "allwinner,sun8i-v3s-de2-clk";
+			reg = <0x01000000 0x10000>;
+			clocks = <&ccu CLK_BUS_DE>,
+				 <&ccu CLK_DE>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		mixer0: mixer@1100000 {
+			compatible = "allwinner,sun8i-v3s-de2-mixer";
+			reg = <0x01100000 0x100000>;
+			clocks = <&display_clocks 0>,
+				 <&display_clocks 6>;
+			clock-names = "bus",
+				      "mod";
+			resets = <&display_clocks 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mixer0_out: port@1 {
+					reg = <1>;
+
+					mixer0_out_tcon0: endpoint {
+						remote-endpoint = <&tcon0_in_mixer0>;
+					};
+				};
+			};
+		};
+
+		syscon: system-control@1c00000 {
+			compatible = "allwinner,sun8i-v3s-system-control",
+				     "allwinner,sun8i-h3-system-control";
+			reg = <0x01c00000 0xd0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		nmi_intc: interrupt-controller@1c000d0 {
+			compatible = "allwinner,sun8i-v3s-nmi",
+				     "allwinner,sun9i-a80-nmi";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x01c000d0 0x0c>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun8i-v3s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun8i-v3s-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_TCON0>,
+				 <&ccu CLK_TCON0>;
+			clock-names = "ahb",
+				      "tcon-ch0";
+			clock-output-names = "tcon-data-clock";
+			#clock-cells = <0>;
+			resets = <&ccu RST_BUS_TCON0>;
+			reset-names = "lcd";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					reg = <0>;
+
+					tcon0_in_mixer0: endpoint {
+						remote-endpoint = <&mixer0_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			};
+		};
+
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		crypto@1c15000 {
+			compatible = "allwinner,sun8i-v3s-crypto",
+				     "allwinner,sun8i-a33-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 16>, <&dma 16>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_CE>;
+			reset-names = "ahb";
+		};
+
+		usb_otg: usb@1c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c19400 {
+			compatible = "allwinner,sun8i-v3s-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci: usb@1c1a000 {
+			compatible = "allwinner,sun8i-v3s-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci: usb@1c1a400 {
+			compatible = "allwinner,sun8i-v3s-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
+				 <&ccu CLK_USB_OHCI0>;
+			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-v3s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@1c20400 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-v3-rtc";
+			reg = <0x01c20400 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc32k>;
+			clock-output-names = "osc32k", "osc32k-out";
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-v3s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			/omit-if-no-ref/
+			csi0_mclk_pin: csi0-mclk-pin {
+				pins = "PE20";
+				function = "csi_mipi";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bit_pins: csi1-8bit-pins {
+				pins = "PE0", "PE2", "PE3", "PE8", "PE9",
+				       "PE10", "PE11", "PE12", "PE13", "PE14",
+				       "PE15";
+				function = "csi";
+			};
+
+			/omit-if-no-ref/
+			csi1_mclk_pin: csi1-mclk-pin {
+				pins = "PE1";
+				function = "csi";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB6", "PB7";
+				function = "i2c0";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pb_pins: i2c1-pb-pins {
+				pins = "PB8", "PB9";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			i2c1_pe_pins: i2c1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "i2c1";
+			};
+
+			/omit-if-no-ref/
+			lcd_rgb666_pe_pins: lcd-rgb666-pe-pins {
+				pins = "PE0", "PE1", "PE2", "PE3", "PE4", "PE5",
+				       "PE6", "PE7", "PE8", "PE9", "PE10", "PE11",
+				       "PE12", "PE13", "PE14", "PE15", "PE16", "PE17",
+				       "PE18", "PE19", "PE23", "PE24";
+				function = "lcd";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB8", "PB9";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pe_pins: uart1-pe-pins {
+				pins = "PE21", "PE22";
+				function = "uart1";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			pwm0_pin: pwm0-pin {
+				pins = "PB4";
+				function = "pwm0";
+			};
+
+			/omit-if-no-ref/
+			pwm1_pin: pwm1-pin {
+				pins = "PB5";
+				function = "pwm1";
+			};
+
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun8i-v3s-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@1c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pwm: pwm@1c21400 {
+			compatible = "allwinner,sun8i-v3s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21400 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-v3s-codec";
+			reg = <0x01c22c00 0x400>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
+			clock-names = "apb", "codec";
+			resets = <&ccu RST_BUS_CODEC>;
+			dmas = <&dma 15>, <&dma 15>;
+			dma-names = "rx", "tx";
+			allwinner,codec-analog-controls = <&codec_analog>;
+			status = "disabled";
+		};
+
+		codec_analog: codec-analog@1c23000 {
+			compatible = "allwinner,sun8i-v3s-codec-analog";
+			reg = <0x01c23000 0x4>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "tx", "rx";
+			resets = <&ccu RST_BUS_UART2>;
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c30000 {
+			compatible = "allwinner,sun8i-v3s-emac";
+			syscon = <&syscon>;
+			reg = <0x01c30000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "stmmaceth";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "stmmaceth";
+			phy-handle = <&int_mii_phy>;
+			phy-mode = "mii";
+			status = "disabled";
+
+			mdio: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "snps,dwmac-mdio";
+			};
+
+			mdio_mux: mdio-mux {
+				compatible = "allwinner,sun8i-h3-mdio-mux";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mdio-parent-bus = <&mdio>;
+				/* Only one MDIO is usable at the time */
+				internal_mdio: mdio@1 {
+					compatible = "allwinner,sun8i-h3-mdio-internal";
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					int_mii_phy: ethernet-phy@1 {
+						compatible = "ethernet-phy-ieee802.3-c22";
+						reg = <1>;
+						clocks = <&ccu CLK_BUS_EPHY>;
+						resets = <&ccu RST_BUS_EPHY>;
+					};
+				};
+			};
+		};
+
+		spi0: spi@1c68000 {
+			compatible = "allwinner,sun8i-h3-spi";
+			reg = <0x01c68000 0x1000>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_pins>;
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		csi1: camera@1cb4000 {
+			compatible = "allwinner,sun8i-v3s-csi";
+			reg = <0x01cb4000 0x3000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_CSI>,
+				 <&ccu CLK_CSI_SCLK>,
+				 <&ccu CLK_DRAM_CSI>;
+			clock-names = "bus", "mod", "ram";
+			resets = <&ccu RST_BUS_CSI>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
index 15c22b06fc4b..6575ef274453 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v40-bananapi-m2-berry.dts
@@ -42,6 +42,7 @@
 
 /dts-v1/;
 #include "sun8i-r40.dtsi"
+#include "sun8i-r40-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -93,7 +94,7 @@
 		enable-active-high;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
 		clocks = <&ccu CLK_OUTA>;
@@ -107,6 +108,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
 &de {
 	status = "okay";
 };
@@ -120,7 +125,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";
 };
@@ -198,16 +203,16 @@
 };
 
 &reg_dc1sw {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-gmac-phy";
 };
 
 &reg_dcdc1 {
 	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v0";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
index d3b337b043a1..52ad95a2063a 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-cubieboard4.dts
@@ -63,12 +63,12 @@
 	leds {
 		compatible = "gpio-leds";
 
-		green {
+		led-0 {
 			label = "cubieboard4:green:usr";
 			gpios = <&pio 7 17 GPIO_ACTIVE_HIGH>; /* PH17 */
 		};
 
-		red {
+		led-1 {
 			label = "cubieboard4:red:usr";
 			gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
 		};
@@ -87,7 +87,7 @@
 	};
 
 	vga-dac {
-		compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac";
+		compatible = "corpro,gm7123", "adi,adv7123";
 		vdd-supply = <&reg_dcdc1>;
 
 		ports {
@@ -129,7 +129,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_cldo1>;
 	status = "okay";
 };
@@ -280,8 +280,8 @@
 
 			reg_dcdc5: dcdc5 {
 				regulator-always-on;
-				regulator-min-microvolt = <1425000>;
-				regulator-max-microvolt = <1575000>;
+				regulator-min-microvolt = <1450000>;
+				regulator-max-microvolt = <1550000>;
 				regulator-name = "vcc-dram";
 			};
 
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
index bbc6335e5631..5c3580d712e4 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80-optimus.dts
@@ -124,7 +124,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-supply = <&reg_cldo1>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
index c34d505c7efe..a1ae0929cec9 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun9i-a80.dtsi
@@ -196,14 +196,14 @@
 		 * The actual TX clock rate is not controlled by the
 		 * gmac_tx clock.
 		 */
-		mii_phy_tx_clk: mii_phy_tx_clk {
+		mii_phy_tx_clk: mii-phy-tx-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <25000000>;
 			clock-output-names = "mii_phy_tx";
 		};
 
-		gmac_int_tx_clk: gmac_int_tx_clk {
+		gmac_int_tx_clk: gmac-int-tx-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <125000000>;
@@ -346,6 +346,7 @@
 			clocks = <&usb_clocks CLK_BUS_HCI0>;
 			resets = <&usb_clocks RST_USB0_HCI>;
 			phys = <&usbphy1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -357,6 +358,7 @@
 				 <&usb_clocks CLK_USB_OHCI0>;
 			resets = <&usb_clocks RST_USB0_HCI>;
 			phys = <&usbphy1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -378,22 +380,23 @@
 			clocks = <&usb_clocks CLK_BUS_HCI1>;
 			resets = <&usb_clocks RST_USB1_HCI>;
 			phys = <&usbphy2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
 		usbphy2: phy@a01800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a01800 0x4>;
-			clocks = <&usb_clocks CLK_USB1_HSIC>,
+			clocks = <&usb_clocks CLK_USB1_PHY>,
 				 <&usb_clocks CLK_USB_HSIC>,
-				 <&usb_clocks CLK_USB1_PHY>;
-			clock-names = "hsic_480M",
+				 <&usb_clocks CLK_USB1_HSIC>;
+			clock-names = "phy",
 				      "hsic_12M",
-				      "phy";
-			resets = <&usb_clocks RST_USB1_HSIC>,
-				 <&usb_clocks RST_USB1_PHY>;
-			reset-names = "hsic",
-				      "phy";
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB1_PHY>,
+				 <&usb_clocks RST_USB1_HSIC>;
+			reset-names = "phy",
+				      "hsic";
 			status = "disabled";
 			#phy-cells = <0>;
 			/* usb1 is always used with HSIC */
@@ -407,6 +410,7 @@
 			clocks = <&usb_clocks CLK_BUS_HCI2>;
 			resets = <&usb_clocks RST_USB2_HCI>;
 			phys = <&usbphy3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -418,22 +422,23 @@
 				 <&usb_clocks CLK_USB_OHCI2>;
 			resets = <&usb_clocks RST_USB2_HCI>;
 			phys = <&usbphy3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
 		usbphy3: phy@a02800 {
 			compatible = "allwinner,sun9i-a80-usb-phy";
 			reg = <0x00a02800 0x4>;
-			clocks = <&usb_clocks CLK_USB2_HSIC>,
+			clocks = <&usb_clocks CLK_USB2_PHY>,
 				 <&usb_clocks CLK_USB_HSIC>,
-				 <&usb_clocks CLK_USB2_PHY>;
-			clock-names = "hsic_480M",
+				 <&usb_clocks CLK_USB2_HSIC>;
+			clock-names = "phy",
 				      "hsic_12M",
-				      "phy";
-			resets = <&usb_clocks RST_USB2_HSIC>,
-				 <&usb_clocks RST_USB2_PHY>;
-			reset-names = "hsic",
-				      "phy";
+				      "hsic_480M";
+			resets = <&usb_clocks RST_USB2_PHY>,
+				 <&usb_clocks RST_USB2_HSIC>;
+			reset-names = "phy",
+				      "hsic";
 			status = "disabled";
 			#phy-cells = <0>;
 		};
@@ -452,6 +457,15 @@
 			reg = <0x01700000 0x100>;
 		};
 
+		crypto: crypto@1c02000 {
+			compatible = "allwinner,sun9i-a80-crypto";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_SS>;
+			clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>;
+			clock-names = "bus", "mod";
+		};
+
 		mmc0: mmc@1c0f000 {
 			compatible = "allwinner,sun9i-a80-mmc";
 			reg = <0x01c0f000 0x1000>;
@@ -516,9 +530,7 @@
 			compatible = "allwinner,sun9i-a80-mmc-config-clk";
 			reg = <0x01c13000 0x10>;
 			clocks = <&ccu CLK_BUS_MMC>;
-			clock-names = "ahb";
 			resets = <&ccu RST_BUS_MMC>;
-			reset-names = "ahb";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			clock-output-names = "mmc0_config", "mmc1_config",
@@ -866,8 +878,12 @@
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
 			clock-names = "ahb", "tcon-ch0";
-			resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>;
-			reset-names = "lcd", "edp";
+			resets = <&ccu RST_BUS_LCD0>,
+				 <&ccu RST_BUS_EDP>,
+				 <&ccu RST_BUS_LVDS>;
+			reset-names = "lcd",
+				      "edp",
+				      "lvds";
 			clock-output-names = "tcon0-pixel-clock";
 			#clock-cells = <0>;
 
@@ -942,6 +958,7 @@
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x06000ca0 0x20>;
 			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		pio: pinctrl@6000800 {
@@ -1149,6 +1166,7 @@
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x08001000 0x20>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
 		};
 
 		prcm@8001400 {
@@ -1200,7 +1218,6 @@
 				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>;
 			clock-names = "apb", "hosc", "losc";
-			resets = <&apbs_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
new file mode 100644
index 000000000000..472ded0aafcf
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s-licheepi-nano.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lichee Pi Nano";
+	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
+
+	aliases {
+		mmc0 = &mmc0;
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Headphone", "HPCOM",
+		"MIC", "Mic";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
new file mode 100644
index 000000000000..e4b41bc93852
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c100s.dtsi
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
+ */
+
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	clocks {
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@1c00000 {
+			compatible = "allwinner,suniv-f1c100s-system-control",
+				     "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,suniv-f1c100s-sram-d",
+						     "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,suniv-f1c100s-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <23>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,suniv-f1c100s-mmc",
+				     "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb", "mmc", "output", "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <24>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,suniv-f1c100s-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <26>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			compatible = "allwinner,suniv-f1c100s-usb-phy";
+			reg = <0x01c13400 0x10>;
+			reg-names = "phy_ctrl";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,suniv-f1c100s-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <18>;
+			clocks = <&ccu CLK_BUS_DMA>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <2>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,suniv-f1c100s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,suniv-f1c100s-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,suniv-f1c100s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <38>, <39>, <40>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+			};
+
+			/omit-if-no-ref/
+			i2c0_pd_pins: i2c0-pd-pins {
+				pins = "PD0", "PD12";
+				function = "i2c0";
+			};
+
+			spi0_pc_pins: spi0-pc-pins {
+				pins = "PC0", "PC1", "PC2", "PC3";
+				function = "spi0";
+			};
+
+			uart0_pe_pins: uart0-pe-pins {
+				pins = "PE0", "PE1";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pa_pins: uart1-pa-pins {
+				pins = "PA2", "PA3";
+				function = "uart1";
+			};
+		};
+
+		i2c0: i2c@1c27000 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27000 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1c27400 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27400 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1c27800 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27800 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,suniv-f1c100s-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <13>, <14>, <15>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20ca0 {
+			compatible = "allwinner,suniv-f1c100s-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <16>;
+			clocks = <&osc32k>;
+		};
+
+		pwm: pwm@1c21000 {
+			compatible = "allwinner,suniv-f1c100s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21000 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir: ir@1c22c00 {
+			compatible = "allwinner,suniv-f1c100s-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c22c00 0x400>;
+			clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&ccu RST_BUS_IR>;
+			interrupts = <6>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c23400 {
+			compatible = "allwinner,suniv-f1c100s-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c23400 0x400>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		uart0: serial@1c25000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c25400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c25800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c25800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		codec: codec@1c23c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,suniv-f1c100s-codec";
+			reg = <0x01c23c00 0x400>;
+			interrupts = <21>;
+			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 12>,
+			       <&dma SUN4I_DMA_NORMAL 12>;
+			dma-names = "rx", "tx";
+			resets = <&ccu RST_BUS_CODEC>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
new file mode 100644
index 000000000000..2d2a3f026df3
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-lctech-pi.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Arm Ltd,
+ * based on work:
+ *   Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Lctech Pi F1C200s";
+	compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
+		     "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pa_pins>;
+	status = "okay";
+};
+
+/*
+ * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
+ * to Vin, which supplies the board. Host mode works (if the board is powered
+ * otherwise), but peripheral is probably the intention.
+ */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
new file mode 100644
index 000000000000..184c245041a6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/suniv-f1c200s-popstick-v1.1.dts
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Popcorn Computer PopStick v1.1";
+	compatible = "sourceparts,popstick-v1.1", "sourceparts,popstick",
+		     "allwinner,suniv-f1c200s", "allwinner,suniv-f1c100s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 4 6 GPIO_ACTIVE_HIGH>; /* PE6 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
+	bus-width = <4>;
+	disable-wp;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pc_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pe_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
new file mode 100644
index 000000000000..235994a4a2eb
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+	/*
+	 * Bananapi M2+ v1.2 uses a GPIO line to change the effective
+	 * resistance on the CPU regulator's feedback pin.
+	 */
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1108475>;
+		regulator-max-microvolt = <1308475>;
+		regulator-ramp-delay = <50>; /* 4ms */
+		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+		gpios-states = <0x1>;
+		states = <1108475 0>, <1308475 1>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
index 39263e74fbb5..873817ddb4ea 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-bananapi-m2-plus.dtsi
@@ -77,30 +77,31 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		sw4 {
+		switch-4 {
 			label = "power";
-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
 	reg_gmac_3v3: gmac-3v3 {
-		      compatible = "regulator-fixed";
-		      regulator-name = "gmac-3v3";
-		      regulator-min-microvolt = <3300000>;
-		      regulator-max-microvolt = <3300000>;
-		      startup-delay-us = <100000>;
-		      enable-active-high;
-		      gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 	};
 
-	wifi_pwrseq: wifi_pwrseq {
+	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-		clocks = <&rtc 1>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "ext_clock";
 	};
 };
@@ -126,7 +127,7 @@
 	pinctrl-0 = <&emac_rgmii_pins>;
 	phy-supply = <&reg_gmac_3v3>;
 	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 
 	status = "okay";
 };
@@ -219,7 +220,8 @@
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
-		clocks = <&rtc 1>;
+		max-speed = <1500000>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
 		clock-names = "lpo";
 		vbat-supply = <&reg_vcc3v3>;
 		vddio-supply = <&reg_vcc3v3>;
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
index d8e5826fb3de..d8e5826fb3de 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-common-regulators.dtsi
diff --git a/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
new file mode 100644
index 000000000000..a415c4a78a70
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-d1s-t113-mangopi-mq-r.dtsi
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2022 Arm Ltd.
+/*
+ * Common peripherals and configurations for MangoPi MQ-R boards.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+		};
+	};
+
+	/* board wide 5V supply directly from the USB-C socket */
+	reg_vcc5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board */
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	/* XC6206 LDO on the board */
+	reg_avdd2v8: regulator-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_3v3>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_3v3>;
+	vcc-pd-supply = <&reg_3v3>;
+	vcc-pe-supply = <&reg_avdd2v8>;
+	vcc-pf-supply = <&reg_3v3>;
+	vcc-pg-supply = <&reg_3v3>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pb_pins>;
+	status = "okay";
+};
+
+/* The USB-C socket has its CC pins pulled to GND, so is hardwired as a UFP. */
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
new file mode 100644
index 000000000000..be5f5528a118
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5-emlid-neutis.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis SoMs.
+ *
+ * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
+		post-power-on-delay-ms = <200>;
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "ext_clock";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpux>;
+};
+
+&reg_usb0_vbus {
+	gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
+	status = "okay";
+};
+
+
+&de {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&r_pio>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc CLK_OSC32K_FANOUT>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
+		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1", "Mic",
+		"MIC2", "Mic",
+		"Mic",  "MBIAS";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
index eba190b3f9de..7df60515a903 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-h3-h5.dtsi
@@ -40,6 +40,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun8i-de2.h>
 #include <dt-bindings/clock/sun8i-h3-ccu.h>
 #include <dt-bindings/clock/sun8i-r-ccu.h>
@@ -82,7 +83,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		osc24M: osc24M_clk {
+		osc24M: osc24M-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
@@ -90,7 +91,7 @@
 			clock-output-names = "osc24M";
 		};
 
-		osc32k: osc32k_clk {
+		osc32k: osc32k-clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
@@ -109,11 +110,12 @@
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
+		dma-ranges;
 		ranges;
 
 		display_clocks: clock@1000000 {
 			/* compatible is in per SoC .dtsi file */
-			reg = <0x01000000 0x100000>;
+			reg = <0x01000000 0x10000>;
 			clocks = <&ccu CLK_BUS_DE>,
 				 <&ccu CLK_DE>;
 			clock-names = "bus",
@@ -230,6 +232,22 @@
 		sid: eeprom@1c14000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x1c14000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration@34 {
+				reg = <0x34 4>;
+			};
+		};
+
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-h3-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
 		};
 
 		usb_otg: usb@1c19000 {
@@ -284,6 +302,8 @@
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -294,6 +314,8 @@
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
 				 <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -304,6 +326,7 @@
 			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -315,6 +338,7 @@
 				 <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -325,6 +349,7 @@
 			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
 			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -336,6 +361,7 @@
 				 <&ccu CLK_USB_OHCI2>;
 			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -346,6 +372,7 @@
 			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
 			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 			phys = <&usbphy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -357,13 +384,14 @@
 				 <&ccu CLK_USB_OHCI3>;
 			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 			phys = <&usbphy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
 		ccu: clock@1c20000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01c20000 0x400>;
-			clocks = <&osc24M>, <&rtc 0>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>;
 			clock-names = "hosc", "losc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -372,9 +400,11 @@
 		pio: pinctrl@1c20800 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01c20800 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -472,6 +502,11 @@
 				function = "uart2";
 			};
 
+			uart2_rts_cts_pins: uart2-rts-cts-pins {
+				pins = "PA2", "PA3";
+				function = "uart2";
+			};
+
 			uart3_pins: uart3-pins {
 				pins = "PA13", "PA14";
 				function = "uart3";
@@ -538,6 +573,21 @@
 			};
 		};
 
+		mbus: dram-controller@1c62000 {
+			/* compatible is in per SoC .dtsi file */
+			reg = <0x01c62000 0x1000>,
+			      <0x01c63000 0x1000>;
+			reg-names = "mbus", "dram";
+			clocks = <&ccu CLK_MBUS>,
+				 <&ccu CLK_DRAM>,
+				 <&ccu CLK_BUS_DRAM>;
+			clock-names = "mbus", "dram", "bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+			#interconnect-cells = <1>;
+		};
+
 		spi0: spi@1c68000 {
 			compatible = "allwinner,sun8i-h3-spi";
 			reg = <0x01c68000 0x1000>;
@@ -624,6 +674,19 @@
 			status = "disabled";
 		};
 
+		i2s2: i2s@1c22800 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun8i-h3-i2s";
+			reg = <0x01c22800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
+			clock-names = "apb", "mod";
+			dmas = <&dma 27>;
+			resets = <&ccu RST_BUS_I2S2>;
+			dma-names = "tx";
+			status = "disabled";
+		};
+
 		codec: codec@1c22c00 {
 			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun8i-h3-codec";
@@ -647,7 +710,7 @@
 			clocks = <&ccu CLK_BUS_UART0>;
 			resets = <&ccu RST_BUS_UART0>;
 			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -660,7 +723,7 @@
 			clocks = <&ccu CLK_BUS_UART1>;
 			resets = <&ccu RST_BUS_UART1>;
 			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -673,7 +736,7 @@
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
 			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -686,7 +749,7 @@
 			clocks = <&ccu CLK_BUS_UART3>;
 			resets = <&ccu RST_BUS_UART3>;
 			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -761,8 +824,8 @@
 			reg-io-width = <1>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu CLK_HDMI>;
-			clock-names = "iahb", "isfr", "tmds";
+				 <&ccu CLK_HDMI>, <&rtc CLK_OSC32K>;
+			clock-names = "iahb", "isfr", "tmds", "cec";
 			resets = <&ccu RST_BUS_HDMI1>;
 			reset-names = "ctrl";
 			phys = <&hdmi_phy>;
@@ -791,7 +854,7 @@
 			compatible = "allwinner,sun8i-h3-hdmi-phy";
 			reg = <0x01ef0000 0x10000>;
 			clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
-				 <&ccu 6>;
+				 <&ccu CLK_PLL_VIDEO>;
 			clock-names = "bus", "mod", "pll-0";
 			resets = <&ccu RST_BUS_HDMI0>;
 			reset-names = "phy";
@@ -801,6 +864,7 @@
 		rtc: rtc@1f00000 {
 			/* compatible is in per SoC .dtsi file */
 			reg = <0x01f00000 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			clock-output-names = "osc32k", "osc32k-out", "iosc";
@@ -808,10 +872,20 @@
 			#clock-cells = <1>;
 		};
 
+		r_intc: interrupt-controller@1f00c00 {
+			compatible = "allwinner,sun8i-h3-r-intc",
+				     "allwinner,sun6i-a31-r-intc";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x01f00c00 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		r_ccu: clock@1f01400 {
 			compatible = "allwinner,sun8i-h3-r-ccu";
 			reg = <0x01f01400 0x100>;
-			clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 9>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0>;
 			clock-names = "hosc", "losc", "iosc", "pll-periph";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -845,11 +919,26 @@
 			#size-cells = <0>;
 		};
 
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&r_ccu CLK_APB0_UART>;
+			resets = <&r_ccu RST_APB0_UART>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_uart_pins>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-h3-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
+			interrupt-parent = <&r_intc>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>;
+			clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			#gpio-cells = <3>;
@@ -865,6 +954,26 @@
 				pins = "PL0", "PL1";
 				function = "s_i2c";
 			};
+
+			r_pwm_pin: r-pwm-pin {
+				pins = "PL10";
+				function = "s_pwm";
+			};
+
+			r_uart_pins: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
+		};
+
+		r_pwm: pwm@1f03800 {
+			compatible = "allwinner,sun8i-h3-pwm";
+			reg = <0x01f03800 0x8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_pwm_pin>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
index 0d002f83a259..0d002f83a259 100644
--- a/arch/arm/boot/dts/sunxi-itead-core-common.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-itead-core-common.dtsi
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
index 19b3b23cfaa8..89731bb34c6b 100644
--- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-cc.dtsi
@@ -42,13 +42,14 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+			wakeup-source;
 		};
 	};
 
@@ -128,6 +129,18 @@
 	cpu-supply = <&reg_vdd_cpux>;
 };
 
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
new file mode 100644
index 000000000000..50d328c2a84d
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sunxi-libretech-all-h3-it.dtsi
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "d";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_led {
+			label = "librecomputer:blue:status";
+			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+	};
+
+	/* This represents the board's 5V input */
+	reg_vcc5v0: vcc5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vcc_dram: vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-dram";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+		enable-active-high;
+	};
+
+	reg_vcc_io: vcc-io {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-io";
+		/* This is simply a MOSFET switch */
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc3v3>;
+		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+	};
+
+	reg_vcc_usbwifi: vcc-usbwifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-usbwifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&pio 6 4 GPIO_ACTIVE_HIGH>; /* PG4 */
+		enable-active-high;
+	};
+
+	reg_vdd_cpux: vdd-cpux {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpux";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_vcc5v0>;
+		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc_io>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&pio {
+	vcc-pa-supply = <&reg_vcc_io>;
+	vcc-pc-supply = <&reg_vcc_io>;
+	vcc-pd-supply = <&reg_vcc_io>;
+	vcc-pe-supply = <&reg_vcc_io>;
+	vcc-pf-supply = <&reg_vcc_io>;
+	vcc-pg-supply = <&reg_vcc_io>;
+};
+
+&r_pio {
+	vcc-pl-supply = <&reg_vcc3v3>;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pa_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc_usbwifi>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
index 117198c52e1f..117198c52e1f 100644
--- a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/allwinner/sunxi-reference-design-tablet.dtsi
diff --git a/arch/arm/boot/dts/alphascale/Makefile b/arch/arm/boot/dts/alphascale/Makefile
new file mode 100644
index 000000000000..8d1314fc79d0
--- /dev/null
+++ b/arch/arm/boot/dts/alphascale/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
+dtb-$(CONFIG_MACH_ASM9260) += \
+	alphascale-asm9260-devkit.dtb
diff --git a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
index c77e2c902fb6..c77e2c902fb6 100644
--- a/arch/arm/boot/dts/alphascale-asm9260-devkit.dts
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260-devkit.dts
diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
index 2ce6038536fd..2ce6038536fd 100644
--- a/arch/arm/boot/dts/alphascale-asm9260.dtsi
+++ b/arch/arm/boot/dts/alphascale/alphascale-asm9260.dtsi
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
deleted file mode 100644
index 386d5f89978e..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 2110";
-};
-
-&am33xx_pinmux {
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&davinci_mdio {
-	phy0: ethernet-phy@0 {
-		reg = <1>;
-	};
-};
-
-&cpsw_emac0 {
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
-	phy-handle = <&phy0>;
-};
-
-&cpsw_emac1 {
-	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
-	phy-handle = <&phy1>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
deleted file mode 100644
index b0df7256db13..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 3220";
-};
-
-&am33xx_pinmux {
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cpsw_emac0 {
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&cpsw_emac1 {
-	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
-	phy-handle = <&phy1>;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
deleted file mode 100644
index d6aa46e8700e..000000000000
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-/*
- * VScom OnRISC
- * http://www.vscom.de
- */
-
-/dts-v1/;
-
-#include "am335x-baltos.dtsi"
-#include "am335x-baltos-leds.dtsi"
-
-/ {
-	model = "OnRISC Baltos iR 5221";
-};
-
-&am33xx_pinmux {
-	tca6416_pins: pinmux_tca6416_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
-		>;
-	};
-
-
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-
-	status = "okay";
-};
-
-&i2c1 {
-	tca6416: gpio@20 {
-		compatible = "ti,tca6416";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tca6416_pins>;
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cpsw_emac0 {
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
-	fixed-link {
-		speed = <100>;
-		full-duplex;
-	};
-};
-
-&cpsw_emac1 {
-	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
-	phy-handle = <&phy1>;
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-
-	status = "okay";
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
deleted file mode 100644
index 7ad079861efd..000000000000
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ /dev/null
@@ -1,163 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include <dt-bindings/display/tda998x.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
-};
-
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
-};
-
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
-		>;
-	};
-
-	mcasp0_pins: mcasp0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
-		>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-
-	/* If you want to get 24 bit RGB and 16 BGR mode instead of
-	 * current 16 bit RGB and 24 BGR modes, set the propety
-	 * below to "crossed" and uncomment the video-ports -property
-	 * in tda19988 node.
-	 */
-	blue-and-red-wiring = "straight";
-
-	port {
-		lcdc_0: endpoint@0 {
-			remote-endpoint = <&hdmi_0>;
-		};
-	};
-};
-
-&i2c0 {
-	tda19988: tda19988@70 {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-		nxp,calib-gpios = <&gpio1 25 0>;
-		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
-		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-
-		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
-		/* video-ports = <0x234501>; */
-
-		#sound-dai-cells = <0>;
-		audio-ports = <	TDA998x_I2S	0x03>;
-
-		ports {
-			port@0 {
-				hdmi_0: endpoint@0 {
-					remote-endpoint = <&lcdc_0>;
-				};
-			};
-		};
-	};
-};
-
-&rtc {
-	system-power-controller;
-};
-
-&mcasp0	{
-	#sound-dai-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcasp0_pins>;
-	status = "okay";
-	op-mode = <0>;	/* MCASP_IIS_MODE */
-	tdm-slots = <2>;
-	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 0
-		>;
-	tx-num-evt = <32>;
-	rx-num-evt = <32>;
-};
-
-/ {
-	clk_mcasp0_fixed: clk_mcasp0_fixed {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24576000>;
-	};
-
-	clk_mcasp0: clk_mcasp0 {
-		#clock-cells = <0>;
-		compatible = "gpio-gate-clock";
-		clocks = <&clk_mcasp0_fixed>;
-		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "TI BeagleBone Black";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink0_master>;
-		simple-audio-card,frame-master = <&dailink0_master>;
-
-		dailink0_master: simple-audio-card,cpu {
-			sound-dai = <&mcasp0>;
-			clocks = <&clk_mcasp0>;
-		};
-
-		simple-audio-card,codec {
-			sound-dai = <&tda19988>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
deleted file mode 100644
index d3928662aed4..000000000000
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-boneblack-common.dtsi"
-
-/ {
-	model = "TI AM335x BeagleBone Black";
-	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-};
-
-&cpu0_opp_table {
-	/*
-	 * All PG 2.0 silicon may not support 1GHz but some of the early
-	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
-	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
-	 */
-	oppnitro-1000000000 {
-		opp-supported-hw = <0x06 0x0100>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
deleted file mode 100644
index 2f6652ef9a15..000000000000
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ /dev/null
@@ -1,444 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-osd335x-common.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x BeagleBone Blue";
-	compatible = "ti,am335x-bone-blue", "ti,am33xx";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		usr_0_led {
-			label = "beaglebone:green:usr0";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		usr_1_led {
-			label = "beaglebone:green:usr1";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		usr_2_led {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		usr_3_led {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-
-		wifi_led {
-			label = "wifi";
-			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "phy0assoc";
-		};
-
-		red_led {
-			label = "red";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green_led {
-			label = "green";
-			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_1_led {
-			label = "bat25";
-			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_2_led {
-			label = "bat50";
-			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_3_led {
-			label = "bat75";
-			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		batt_4_led {
-			label = "bat100";
-			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	wlan_en_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us= <70000>;
-
-		/* WL_EN */
-		gpio = <&gpio3 9 0>;
-		enable-active-high;
-	};
-};
-
-&am33xx_pinmux {
-	user_leds_s0: user_leds_s0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */
-
-		>;
-	};
-
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
-		>;
-	};
-
-	/* UT0 */
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	/* UT1 */
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	/* GPS */
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* (A17) spi0_sclk.uart2_rxd */
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (B17) spi0_d0.uart2_txd */
-		>;
-	};
-
-	/* DSM2 */
-	uart4_pins: pinmux_uart4_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
-		>;
-	};
-
-	/* UT5 */
-	uart5_pins: pinmux_uart5_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4)	/* (U2) lcd_data9.uart5_rxd */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4)	/* (U1) lcd_data8.uart5_txd */
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
-		>;
-	};
-
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* (U9) gpmc_csn1.mmc1_clk */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* (V9) gpmc_csn2.mmc1_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* (U7) gpmc_ad0.mmc1_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* (V7) gpmc_ad1.mmc1_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* (R8) gpmc_ad2.mmc1_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* (T8) gpmc_ad3.mmc1_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* (U8) gpmc_ad4.mmc1_dat4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* (V8) gpmc_ad5.mmc1_dat5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* (R9) gpmc_ad6.mmc1_dat6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* (T9) gpmc_ad7.mmc1_dat7 */
-		>;
-	};
-
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6)	/* (L15) gmii1_rxd1.mmc2_clk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6)	/* (J16) gmii1_txen.mmc2_cmd */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5)	/* (J17) gmii1_rxdv.mmc2_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5)	/* (J18) gmii1_txd3.mmc2_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5)	/* (K15) gmii1_txd2.mmc2_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5)	/* (H16) gmii1_col.mmc2_dat3 */
-		>;
-	};
-
-	bt_pins: pinmux_bt_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* (K17) gmii1_txd0.gpio0[28] - BT_EN */
-		>;
-	};
-
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* (L17) gmii1_rxd3.uart3_rxd */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (L16) gmii1_rxd2.uart3_txd */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* (M17) mdio_data.uart3_ctsn */
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* (M18) mdio_clk.uart3_rtsn */
-		>;
-	};
-
-	wl18xx_pins: pinmux_wl18xx_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* (K18) gmii1_txclk.gpio3[9] - WL_EN */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
-		>;
-	};
-
-	/* DCAN */
-	dcan1_pins: pinmux_dcan1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)		/* (E17) uart0_rtsn.dcan1_rx */
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)		/* (E18) uart0_ctsn.dcan1_tx */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7)		/* (M16) gmii1_rxd0.gpio2[21] */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins>;
-
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "peripheral";
-	interrupts-extended = <&intc 18 &tps 0>;
-	interrupt-names = "mc", "vbus";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&i2c0 {
-	baseboard_eeprom: baseboard_eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		baseboard_data: baseboard_data@0 {
-			reg = <0 0x100>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	mpu9250@68 {
-		compatible = "invensense,mpu9250";
-		reg = <0x68>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
-		i2c-gate {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ax8975@c {
-				compatible = "ak,ak8975";
-				reg = <0x0c>;
-			};
-		};
-	};
-
-	pressure@76 {
-		compatible = "bosch,bmp280";
-		reg = <0x76>;
-	};
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	/delete-property/ ti,pmic-shutdown-controller;
-
-	charger {
-		interrupts = <0>, <1>;
-		interrupt-names = "USB", "AC";
-		status = "okay";
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-};
-
-&mmc3 {
-	dmas = <&edma_xbar 12 0 1
-		&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	status = "okay";
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	non-removable;
-	cap-power-off-card;
-	ti,needs-special-hs-handling;
-	keep-power-in-suspend;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&tscadc {
-	status = "okay";
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-	};
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins &bt_pins>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&rtc {
-	system-power-controller;
-	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-	clock-names = "ext-clk", "int-clk";
-};
-
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-	status = "okay";
-};
-
-&gpio3 {
-	ls_buf_en {
-		gpio-hog;
-		gpios = <10 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "LS_BUF_EN";
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
deleted file mode 100644
index c9611ea4b884..000000000000
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ /dev/null
@@ -1,511 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- * Copyright (C) 2018 Robert Bosch Power Tools GmbH
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "Bosch AM335x Guardian";
-	compatible = "bosch,am335x-guardian", "ti,am33xx";
-
-	chosen {
-		stdout-path = &uart0;
-		tick-timer = &timer2;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&gpio_keys_pins>;
-
-		button21 {
-			label = "guardian-power-button";
-			linux,code = <KEY_POWER>;
-			gpios = <&gpio2 21 0>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins>;
-
-		led1 {
-			label = "green:heartbeat";
-			gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led2 {
-			label = "green:mmc0";
-			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
-		pinctrl-1 = <&lcd_pins_sleep>;
-
-		display-timings {
-			320x240 {
-				hactive         = <320>;
-				vactive         = <240>;
-				hback-porch     = <68>;
-				hfront-porch    = <20>;
-				hsync-len       = <1>;
-				vback-porch     = <18>;
-				vfront-porch    = <4>;
-				vsync-len       = <1>;
-				clock-frequency = <9000000>;
-				hsync-active    = <0>;
-				vsync-active    = <0>;
-			};
-		};
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <24>;
-			bus-width         = <16>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-
-	};
-
-	pwm7: dmtimer-pwm {
-		compatible = "ti,omap-dmtimer-pwm";
-		ti,timers = <&timer7>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&dmtimer7_pins>;
-	};
-
-	vmmcsd_fixed: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins>;
-	ranges = <0 0 0x08000000 0x1000000>;  /* CS0: 16MB for NAND */
-	status = "okay";
-
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-			     <1 IRQ_TYPE_NONE>; /* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		ti,nand-ecc-opt = "bch16";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		/*
-		 * MTD partition table
-		 *
-		 * All SPL-* partitions are sized to minimal length which can
-		 * be independently programmable. For NAND flash this is equal
-		 * to size of erase-block.
-		 */
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		partition@0 {
-			label = "SPL";
-			reg = <0x0 0x40000>;
-		};
-
-		partition@1 {
-			label = "SPL.backup1";
-			reg = <0x40000  0x40000>;
-		};
-
-		partition@2 {
-			label = "SPL.backup2";
-			reg = <0x80000  0x40000>;
-		};
-
-		partition@3 {
-			label = "SPL.backup3";
-			reg = <0xc0000  0x40000>;
-		};
-
-		partition@4 {
-			label = "u-boot";
-			reg = <0x100000 0x100000>;
-		};
-
-		partition@5 {
-			label = "u-boot.backup1";
-			reg = <0x200000 0x100000>;
-		};
-
-		partition@6 {
-			label = "u-boot-env";
-			reg = <0x300000 0x40000>;
-		};
-
-		partition@7 {
-			label = "u-boot-env.backup1";
-			reg = <0x340000 0x40000>;
-		};
-
-		partition@8 {
-			label = "UBI";
-			reg = <0x380000 0x1fc80000>;
-		};
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-};
-
-&lcdc {
-	blue-and-red-wiring = "crossed";
-	status = "okay";
-};
-
-&mmc1 {
-	bus-width = <0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vmmcsd_fixed>;
-	status = "okay";
-};
-
-&rtc {
-	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-	clock-names = "ext-clk", "int-clk";
-	system-power-controller;
-};
-
-&spi0 {
-	ti,pindir-d0-out-d1-in;
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-	status = "okay";
-};
-
-#include "tps65217.dtsi"
-
-&tps {
-	ti,pmic-shutdown-controller;
-	interrupt-parent = <&intc>;
-	interrupts = <7>; /* NMI */
-
-	backlight {
-		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
-		fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
-		default-brightness = <100>;
-	};
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3a";
-			regulator-always-on;
-		};
-	};
-};
-
-&tscadc {
-	status = "okay";
-
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0 {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1 {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&clkout2_pin &gpio_pins>;
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
-		>;
-	};
-
-	dmtimer7_pins: pinmux_dmtimer7_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5)
-		>;
-	};
-
-	gpio_keys_pins: pinmux_gpio_keys_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7)
-		>;
-	};
-
-	gpio_pins: pinmux_gpio_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE7)
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	lcd_disen_pins: pinmux_lcd_disen_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
-		>;
-	};
-
-	lcd_pins_default: pinmux_lcd_pins_default {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
-			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
-		>;
-	};
-
-	lcd_pins_sleep: pinmux_lcd_pins_sleep {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
-		>;
-	};
-
-	leds_pins: pinmux_leds_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7)
-			AM33XX_IOPAD(0x86c, PIN_OUTPUT | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)
-		>;
-	};
-
-	spi0_pins: pinmux_spi0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
-		>;
-	};
-
-	nandflash_pins: pinmux_nandflash_pins {
-		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
-			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
deleted file mode 100644
index 783d411f2cef..000000000000
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ /dev/null
@@ -1,525 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 MOXA Inc. - https://www.moxa.com/
- *
- * Author: SZ Lin (林上智) <sz.lin@moxa.com>
- */
-
-/dts-v1/;
-
-#include "am33xx.dtsi"
-
-/ {
-	model = "Moxa UC-8100-ME-T";
-	compatible = "moxa,uc-8100-me-t", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512 MB */
-	};
-
-	vbat: vbat-regulator {
-		compatible = "regulator-fixed";
-	};
-
-	/* Power supply provides a fixed 3.3V @3A */
-	vmmcsd_fixed: vmmcsd-regulator {
-	      compatible = "regulator-fixed";
-	      regulator-name = "vmmcsd_fixed";
-	      regulator-min-microvolt = <3300000>;
-	      regulator-max-microvolt = <3300000>;
-	      regulator-boot-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "uc8100me:CEL1";
-			gpios = <&gpio_xten 8 0>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "uc8100me:CEL2";
-			gpios = <&gpio_xten 9 0>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "uc8100me:CEL3";
-			gpios = <&gpio_xten 10 0>;
-			default-state = "off";
-		};
-
-		led4 {
-			label = "uc8100me:DIA1";
-			gpios = <&gpio_xten 11 0>;
-			default-state = "off";
-		};
-		led5 {
-			label = "uc8100me:DIA2";
-			gpios = <&gpio_xten 12 0>;
-			default-state = "off";
-		};
-		led6 {
-			label = "uc8100me:DIA3";
-			gpios = <&gpio_xten 13 0>;
-			default-state = "off";
-		};
-		led7 {
-			label = "uc8100me:SD";
-			gpios = <&gpio_xten 14 0>;
-			default-state = "off";
-		};
-		led8 {
-			label = "uc8100me:USB";
-			gpios = <&gpio_xten 15 0>;
-			default-state = "off";
-		};
-		led9 {
-			label = "uc8100me:USER";
-			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	buttons: push_button {
-		compatible = "gpio-keys";
-	};
-
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&minipcie_pins>;
-
-	minipcie_pins: pinmux_minipcie {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_pclk.gpio2_24 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_ac_bias_en.gpio2_25 */
-			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_vsync.gpio2_22  Power off PIN*/
-		>;
-	};
-
-	push_button_pins: pinmux_push_button {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_ahcklx.gpio3_21 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart0_ctsn.i2c1_sda */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart0_rtsn.i2c1_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6)		/* lcd_data14.uart5_ctsn */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6)  /* lcd_data15.uart5_rtsn */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4)     /* lcd_data9.uart5_rxd */
-			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4)		/* lcd_data8.uart5_txd */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
-
-			/* Slave 2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_crs_dv */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rxer */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_txen */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_td1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_td0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rd0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1)  /* rmii2_refclk */
-
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	mmc0_pins_default: pinmux_mmc0_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7)	/* mcasp0_aclkx.gpio3_14 */
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)    /* mcasp0_aclkx.gpio3_18 */
-		>;
-	};
-
-	mmc2_pins_default: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			/* eMMC */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad12.mmc2_dat0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad13.mmc2_dat1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad14.mmc2_dat2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad15.mmc2_dat3 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad8.mmc2_dat4 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad9.mmc2_dat5 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad10.mmc2_dat6 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad11.mmc2_dat7 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)     /* gpmc_csn3.mmc2_cmd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc2_clk */
-		>;
-	};
-
-	spi0_pins: pinmux_spi0 {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-};
-
-&uart0 {
-	/* Console */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-};
-
-&uart1 {
-	/* UART 1 setting */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-};
-
-&uart5 {
-	/* UART 2 setting */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tpm: tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-	};
-
-	tps: tps@2d {
-		compatible = "ti,tps65910";
-		reg = <0x2d>;
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c16";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
-	rtc_wdt: rtc_wdt@68 {
-		compatible = "dallas,ds1374";
-		reg = <0x68>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-	gpio_xten: gpio_xten@27 {
-		compatible = "nxp,pca9535";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0x27>;
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1378000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			compatible = "regulator-fixed";
-			regulator-name = "vmmc_reg";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-/* Power */
-&vbat {
-	regulator-name = "vbat";
-	regulator-min-microvolt = <5000000>;
-	regulator-max-microvolt = <5000000>;
-};
-
-&mac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cpsw_default>;
-	dual_emac = <1>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&davinci_mdio_default>;
-	status = "okay";
-
-	ethphy0: ethernet-phy@4 {
-		reg = <4>;
-	};
-
-	ethphy1: ethernet-phy@5 {
-		reg = <5>;
-	};
-};
-
-&cpsw_emac0 {
-	status = "okay";
-	phy-handle = <&ethphy0>;
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	status = "okay";
-	phy-handle = <&ethphy1>;
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&gpio0 {
-	ti,no-reset-on-init;
-};
-
-&mmc1 {
-	pinctrl-names = "default";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-0 = <&mmc0_pins_default>;
-	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
-	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&mmc3 {
-	dmas = <&edma_xbar 12 0 1
-			&edma_xbar 13 0 2>;
-	dma-names = "tx", "rx";
-	pinctrl-names = "default";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <8>;
-	pinctrl-0 = <&mmc2_pins_default>;
-	ti,non-removable;
-	status = "okay";
-};
-
-&buttons {
-	pinctrl-names = "default";
-	pinctrl-0 = <&push_button_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	button@0 {
-		label = "push_button";
-		linux,code = <0x100>;
-		gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
-	};
-};
-
-/* SPI Busses */
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
-
-	m25p80@0 {
-		compatible = "mx25l6405d";
-		spi-max-frequency = <40000000>;
-
-		reg = <0>;
-		spi-cpol;
-		spi-cpha;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* reg : The partition's offset and size within the mtd bank. */
-		partitions@0 {
-			label = "MLO";
-			reg = <0x0 0x80000>;
-		};
-
-		partitions@1 {
-			label = "U-Boot";
-			reg = <0x80000 0x100000>;
-		};
-
-		partitions@2 {
-			label = "U-Boot Env";
-			reg = <0x180000 0x20000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
deleted file mode 100644
index ff4f919d22f6..000000000000
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ /dev/null
@@ -1,237 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Author: Robert Nelson <robertcnelson@gmail.com>
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-osd335x-common.dtsi"
-
-/ {
-	model = "TI AM335x PocketBeagle";
-	compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&usr_leds_pins>;
-
-		compatible = "gpio-leds";
-
-		usr0 {
-			label = "beaglebone:green:usr0";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		usr1 {
-			label = "beaglebone:green:usr1";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		usr2 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		usr3 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	vmmcsd_fixed: fixedregulator0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&am33xx_pinmux {
-	i2c2_pins: pinmux-i2c2-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
-			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
-		>;
-	};
-
-	ehrpwm0_pins: pinmux-ehrpwm0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (A13) mcasp0_aclkx.ehrpwm0A */
-		>;
-	};
-
-	ehrpwm1_pins: pinmux-ehrpwm1-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U14) gpmc_a2.ehrpwm1A */
-		>;
-	};
-
-	mmc0_pins: pinmux-mmc0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4)		/* (B12) mcasp0_aclkr.mmc0_sdwp */
-		>;
-	};
-
-	spi0_pins: pinmux-spi0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	spi1_pins: pinmux-spi1-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4)	/* (C18) eCAP0_in_PWM0_out.spi1_sclk */
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E18) uart0_ctsn.spi1_d0 */
-			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E17) uart0_rtsn.spi1_d1 */
-			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE4)	/* (A15) xdma_event_intr0.spi1_cs1 */
-		>;
-	};
-
-	usr_leds_pins: pinmux-usr-leds-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)		/* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)		/* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7)		/* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7)		/* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
-		>;
-	};
-
-	uart0_pins: pinmux-uart0-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-		>;
-	};
-
-	uart4_pins: pinmux-uart4-pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
-			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U17) gpmc_wpn.uart4_txd */
-		>;
-	};
-};
-
-&epwmss0 {
-	status = "okay";
-};
-
-&ehrpwm0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ehrpwm0_pins>;
-};
-
-&epwmss1 {
-	status = "okay";
-};
-
-&ehrpwm1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ehrpwm1_pins>;
-};
-
-&i2c0 {
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c256";
-		reg = <0x50>;
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
-
-&rtc {
-	system-power-controller;
-};
-
-&tscadc {
-	status = "okay";
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-		ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
-		ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
-		ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins>;
-
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "otg";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
deleted file mode 100644
index 8678e6e35493..000000000000
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include "am335x-bone-common.dtsi"
-#include "am335x-boneblack-common.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "SanCloud BeagleBone Enhanced";
-	compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
-			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
-		>;
-	};
-
-	usb_hub_ctrl: usb_hub_ctrl {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
-		>;
-	};
-
-	mpu6050_pins: pinmux_mpu6050_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7)    /* uart0_ctsn.gpio1_8 */
-		>;
-	};
-
-	lps3331ap_pins: pinmux_lps3331ap_pins {
-		pinctrl-single,pins = <
-			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)     /* gpmc_a10.gpio1_26 */
-		>;
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&cpsw_emac0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
-};
-
-&i2c0 {
-	lps331ap: barometer@5c {
-		compatible = "st,lps331ap-press";
-		st,drdy-int-pin = <1>;
-		reg = <0x5c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <26 IRQ_TYPE_EDGE_RISING>;
-	};
-
-	mpu6050: accelerometer@68 {
-		compatible = "invensense,mpu6050";
-		reg = <0x68>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-		orientation = <0xff 0 0 0 1 0 0 0 0xff>;
-	};
-
-	usb2512b: usb-hub@2c {
-		compatible = "microchip,usb2512b";
-		reg = <0x2c>;
-		reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-		/* wifi on port 4 */
-	};
-};
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
deleted file mode 100644
index dced92a8970e..000000000000
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ /dev/null
@@ -1,676 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for AM33xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&scm_clocks {
-	sys_clkin_ck: sys_clkin_ck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	rng_fck: rng_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck@490 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0490>, <0x045c>, <0x0468>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck@480 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0480>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck@484 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x0484>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck@4d8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		reg = <0x04d8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck@488 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0488>, <0x0420>, <0x042c>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a8>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck@494 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0494>, <0x0434>, <0x0440>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a0>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_ddr_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_disp_ck: dpll_disp_ck@498 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0498>, <0x0448>, <0x0454>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		reg = <0x04a4>;
-		ti,index-starts-at-one;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck@48c {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-no-gate-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x048c>, <0x0470>, <0x049c>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck@4ac {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		reg = <0x04ac>;
-		ti,index-starts-at-one;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk@530 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
-		reg = <0x0530>;
-	};
-
-	mmu_fck: mmu_fck@914 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0914>;
-	};
-
-	timer1_fck: timer1_fck@528 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
-		reg = <0x0528>;
-	};
-
-	timer2_fck: timer2_fck@508 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0508>;
-	};
-
-	timer3_fck: timer3_fck@50c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x050c>;
-	};
-
-	timer4_fck: timer4_fck@510 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0510>;
-	};
-
-	timer5_fck: timer5_fck@518 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0518>;
-	};
-
-	timer6_fck: timer6_fck@51c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x051c>;
-	};
-
-	timer7_fck: timer7_fck@504 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0504>;
-	};
-
-	usbotg_fck: usbotg_fck@47c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x047c>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	ieee5000_fck: ieee5000_fck@e4 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x00e4>;
-	};
-
-	wdt1_fck: wdt1_fck@538 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x0538>;
-	};
-
-	l4_rtc_gclk: l4_rtc_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4fw_gclk: l4fw_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sysclk_div_ck: sysclk_div_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
-		reg = <0x0520>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
-		reg = <0x053c>;
-	};
-
-	lcd_gclk: lcd_gclk@534 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x0534>;
-		ti,set-rate-parent;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x052c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck@52c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x052c>;
-		ti,max-div = <2>;
-	};
-
-	sysclkout_pre_ck: sysclkout_pre_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
-		reg = <0x0700>;
-	};
-
-	clkout2_div_ck: clkout2_div_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sysclkout_pre_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <8>;
-		reg = <0x0700>;
-	};
-
-	clkout2_ck: clkout2_ck@700 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout2_div_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0700>;
-	};
-};
-
-&prcm {
-	per_cm: per-cm@0 {
-		compatible = "ti,omap4-cm";
-		reg = <0x0 0x400>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x0 0x400>;
-
-		l4ls_clkctrl: l4ls-clkctrl@38 {
-			compatible = "ti,clkctrl";
-			reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l3s_clkctrl: l3s-clkctrl@1c {
-			compatible = "ti,clkctrl";
-			reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l3_clkctrl: l3-clkctrl@24 {
-			compatible = "ti,clkctrl";
-			reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>;
-			#clock-cells = <2>;
-		};
-
-		l4hs_clkctrl: l4hs-clkctrl@120 {
-			compatible = "ti,clkctrl";
-			reg = <0x120 0x4>;
-			#clock-cells = <2>;
-		};
-
-		pruss_ocp_clkctrl: pruss-ocp-clkctrl@e8 {
-			compatible = "ti,clkctrl";
-			reg = <0xe8 0x4>;
-			#clock-cells = <2>;
-		};
-
-		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x18>;
-			#clock-cells = <2>;
-		};
-
-		lcdc_clkctrl: lcdc-clkctrl@18 {
-			compatible = "ti,clkctrl";
-			reg = <0x18 0x4>;
-			#clock-cells = <2>;
-		};
-
-		clk_24mhz_clkctrl: clk-24mhz-clkctrl@14c {
-			compatible = "ti,clkctrl";
-			reg = <0x14c 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	wkup_cm: wkup-cm@400 {
-		compatible = "ti,omap4-cm";
-		reg = <0x400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x400 0x100>;
-
-		l4_wkup_clkctrl: l4-wkup-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x10>, <0xb4 0x24>;
-			#clock-cells = <2>;
-		};
-
-		l3_aon_clkctrl: l3-aon-clkctrl@14 {
-			compatible = "ti,clkctrl";
-			reg = <0x14 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@b0 {
-			compatible = "ti,clkctrl";
-			reg = <0xb0 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	mpu_cm: mpu-cm@600 {
-		compatible = "ti,omap4-cm";
-		reg = <0x600 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x600 0x100>;
-
-		mpu_clkctrl: mpu-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x8>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4_rtc_cm: l4-rtc-cm@800 {
-		compatible = "ti,omap4-cm";
-		reg = <0x800 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x800 0x100>;
-
-		l4_rtc_clkctrl: l4-rtc-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	gfx_l3_cm: gfx-l3-cm@900 {
-		compatible = "ti,omap4-cm";
-		reg = <0x900 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x900 0x100>;
-
-		gfx_l3_clkctrl: gfx-l3-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x8>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4_cefuse_cm: l4-cefuse-cm@a00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xa00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xa00 0x100>;
-
-		l4_cefuse_clkctrl: l4-cefuse-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x24>;
-			#clock-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
deleted file mode 100644
index fb6b8aa12cc5..000000000000
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ /dev/null
@@ -1,467 +0,0 @@
-/*
- * Device Tree Source for AM33XX SoC
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/am33xx.h>
-#include <dt-bindings/clock/am3.h>
-
-/ {
-	compatible = "ti,am33xx";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		d-can0 = &dcan0;
-		d-can1 = &dcan1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		phy0 = &usb0_phy;
-		phy1 = &usb1_phy;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-		spi0 = &spi0;
-		spi1 = &spi1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_conf>;
-
-		/*
-		 * The three following nodes are marked with opp-suspend
-		 * because the can not be enabled simultaneously on a
-		 * single SoC.
-		 */
-		opp50-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <950000 931000 969000>;
-			opp-supported-hw = <0x06 0x0010>;
-			opp-suspend;
-		};
-
-		opp100-275000000 {
-			opp-hz = /bits/ 64 <275000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x01 0x00FF>;
-			opp-suspend;
-		};
-
-		opp100-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x06 0x0020>;
-			opp-suspend;
-		};
-
-		opp100-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		opp100-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0x06 0x0040>;
-		};
-
-		opp120-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		opp120-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0x06 0x0080>;
-		};
-
-		oppturbo-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0x01 0xFFFF>;
-		};
-
-		oppturbo-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0x06 0x0100>;
-		};
-
-		oppnitro-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1325000 1298500 1351500>;
-			opp-supported-hw = <0x04 0x0200>;
-		};
-	};
-
-	pmu@4b000000 {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-		reg = <0x4b000000 0x1000000>;
-		ti,hwmods = "debugss";
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-			pm-sram = <&pm_sram_code
-				   &pm_sram_data>;
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the AM33XX interconnect.
-	 * The real AM33XX interconnect network is quite complex. Since
-	 * it will not bring real advantage to represent that in DT
-	 * for the moment, just use a fake OCP bus entry to represent
-	 * the whole bus hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		l4_wkup: interconnect@44c00000 {
-			wkup_m3: wkup_m3@100000 {
-				compatible = "ti,am3352-wkup-m3";
-				reg = <0x100000 0x4000>,
-				      <0x180000 0x2000>;
-				reg-names = "umem", "dmem";
-				ti,hwmods = "wkup_m3";
-				ti,pm-firmware = "am335x-pm-firmware.elf";
-			};
-		};
-		l4_per: interconnect@48000000 {
-		};
-		l4_fw: interconnect@47c00000 {
-		};
-		l4_fast: interconnect@4a000000 {
-		};
-		l4_mpuss: interconnect@4b140000 {
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,am33xx-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg =	<0x49000000 0x10000>;
-			reg-names = "edma3_cc";
-			interrupts = <12 13 14>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-				   <&edma_tptc2 0>;
-
-			ti,edma-memcpy-channels = <20 21>;
-		};
-
-		edma_tptc0: tptc@49800000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x49800000 0x100000>;
-			interrupts = <112>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc1: tptc@49900000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x49900000 0x100000>;
-			interrupts = <113>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc2: tptc@49a00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc2";
-			reg =	<0x49a00000 0x100000>;
-			interrupts = <114>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		target-module@47810000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "mmc3";
-			reg = <0x478102fc 0x4>,
-			      <0x47810110 0x4>,
-			      <0x47810114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x47810000 0x1000>;
-
-			mmc3: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				ti,needs-special-reset;
-				interrupts = <29>;
-				reg = <0x0 0x1000>;
-			};
-		};
-
-		usb: usb@47400000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47400000 0x1000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-			status = "disabled";
-
-			usb_ctrl_mod: control@44e10620 {
-				compatible = "ti,am335x-usb-ctrl-module";
-				reg = <0x44e10620 0x10
-					0x44e10648 0x4>;
-				reg-names = "phy_ctrl", "wakeup";
-				status = "disabled";
-			};
-
-			usb0_phy: usb-phy@47401300 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401300 0x100>;
-				reg-names = "phy";
-				status = "disabled";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-				#phy-cells = <0>;
-			};
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401400 0x400
-					0x47401000 0x200>;
-				reg-names = "mc", "control";
-
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb0_phy>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1_phy: usb-phy@47401b00 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401b00 0x100>;
-				reg-names = "phy";
-				status = "disabled";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-				#phy-cells = <0>;
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401c00 0x400
-					0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb1_phy>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				#dma-channels = <30>;
-				#dma-requests = <256>;
-				status = "disabled";
-			};
-		};
-
-		ocmcram: ocmcram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x10000>; /* 64k */
-			ranges = <0x0 0x40300000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			pm_sram_code: pm-sram-code@0 {
-				compatible = "ti,sram";
-				reg = <0x0 0x1000>;
-				protect-exec;
-			};
-
-			pm_sram_data: pm-sram-data@1000 {
-				compatible = "ti,sram";
-				reg = <0x1000 0x1000>;
-				pool;
-			};
-		};
-
-		emif: emif@4c000000 {
-			compatible = "ti,emif-am3352";
-			reg = <0x4c000000 0x1000000>;
-			ti,hwmods = "emif";
-			interrupts = <101>;
-			sram = <&pm_sram_code
-				&pm_sram_data>;
-			ti,no-idle;
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			reg = <0x50000000 0x2000>;
-			interrupts = <100>;
-			dmas = <&edma 52 0>;
-			dma-names = "rxtx";
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			status = "disabled";
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x200>;
-			interrupts = <109>;
-			dmas = <&edma 36 0>;
-			dma-names = "rx";
-		};
-
-		aes: aes@53500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53500000 0xa0>;
-			interrupts = <103>;
-			dmas = <&edma 6 0>,
-			       <&edma 5 0>;
-			dma-names = "tx", "rx";
-		};
-	};
-};
-
-#include "am33xx-l4.dtsi"
-#include "am33xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
deleted file mode 100644
index bf3002009b00..000000000000
--- a/arch/arm/boot/dts/am3517.dtsi
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Device Tree Source for am3517 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "omap3.dtsi"
-
-/ {
-	aliases {
-		serial3 = &uart4;
-		can = &hecc;
-	};
-
-	ocp@68000000 {
-		am35x_otg_hs: am35x_otg_hs@5c040000 {
-			compatible = "ti,omap3-musb";
-			ti,hwmods = "am35x_otg_hs";
-			status = "disabled";
-			reg = <0x5c040000 0x1000>;
-			interrupts = <71>;
-			interrupt-names = "mc";
-		};
-
-		davinci_emac: ethernet@5c000000 {
-			compatible = "ti,am3517-emac";
-			ti,hwmods = "davinci_emac";
-			status = "disabled";
-			reg = <0x5c000000 0x30000>;
-			interrupts = <67 68 69 70>;
-			syscon = <&scm_conf>;
-			ti,davinci-ctrl-reg-offset = <0x10000>;
-			ti,davinci-ctrl-mod-reg-offset = <0>;
-			ti,davinci-ctrl-ram-offset = <0x20000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			ti,davinci-rmii-en = /bits/ 8 <1>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			clocks = <&emac_ick>;
-			clock-names = "ick";
-		};
-
-		davinci_mdio: ethernet@5c030000 {
-			compatible = "ti,davinci_mdio";
-			ti,hwmods = "davinci_mdio";
-			status = "disabled";
-			reg = <0x5c030000 0x1000>;
-			bus_freq = <1000000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&emac_fck>;
-			clock-names = "fck";
-		};
-
-		uart4: serial@4809e000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			status = "disabled";
-			reg = <0x4809e000 0x400>;
-			interrupts = <84>;
-			dmas = <&sdma 55 &sdma 54>;
-			dma-names = "tx", "rx";
-			clock-frequency = <48000000>;
-		};
-
-		omap3_pmx_core2: pinmux@480025d8 {
-			compatible = "ti,omap3-padconf", "pinctrl-single";
-			reg = <0x480025d8 0x24>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pinctrl-cells = <1>;
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			pinctrl-single,register-width = <16>;
-			pinctrl-single,function-mask = <0xff1f>;
-		};
-
-		hecc: can@5c050000 {
-			compatible = "ti,am3517-hecc";
-			status = "disabled";
-			reg = <0x5c050000 0x80>,
-			      <0x5c053000 0x180>,
-			      <0x5c052000 0x200>;
-			reg-names = "hecc", "hecc-ram", "mbx";
-			interrupts = <24>;
-			clocks = <&hecc_ck>;
-		};
-
-		/*
-		 * On am3517 the OCP registers do not seem to be accessible
-		 * similar to the omap34xx. Maybe SGX is permanently set to
-		 * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
-		 * write-only at 0x50000e10. We detect SGX based on the SGX
-		 * revision register instead of the unreadable OCP revision
-		 * register.
-		 */
-		sgx_module: target-module@50000000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x50000014 0x4>;
-			reg-names = "rev";
-			clocks = <&sgx_fck>, <&sgx_ick>;
-			clock-names = "fck", "ick";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x50000000 0x4000>;
-
-			/*
-			 * Closed source PowerVR driver, no child device
-			 * binding or driver in mainline
-			 */
-		};
-	};
-};
-
-/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
-&usb_otg_hs {
-	status = "disabled";
-};
-
-&iva {
-	status = "disabled";
-};
-
-&mailbox {
-	status = "disabled";
-};
-
-&mmu_isp {
-	status = "disabled";
-};
-
-/include/ "am35xx-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
deleted file mode 100644
index 220d0a52797e..000000000000
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for OMAP3 clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&scm_clocks {
-	emac_ick: emac_ick@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <1>;
-	};
-
-	emac_fck: emac_fck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&rmii_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <9>;
-	};
-
-	vpfe_ick: vpfe_ick@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <2>;
-	};
-
-	vpfe_fck: vpfe_fck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&pclk_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <10>;
-	};
-
-	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&ipss_ick>;
-		reg = <0x032c>;
-		ti,bit-shift = <0>;
-	};
-
-	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <8>;
-	};
-
-	hecc_ck: hecc_ck@32c {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-gate-clock";
-		clocks = <&sys_ck>;
-		reg = <0x032c>;
-		ti,bit-shift = <3>;
-	};
-};
-&cm_clocks {
-	ipss_ick: ipss_ick@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
-	};
-
-	rmii_ck: rmii_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <50000000>;
-	};
-
-	pclk_ck: pclk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	uart4_ick_am35xx: uart4_ick_am35xx@a10 {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
-
-	uart4_fck_am35xx: uart4_fck_am35xx@a00 {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
-	};
-};
-
-&cm_clockdomains {
-	core_l3_clkdm: core_l3_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&sdrc_ick>, <&ipss_ick>, <&emac_ick>, <&vpfe_ick>,
-			 <&hsotgusb_ick_am35xx>, <&hsotgusb_fck_am35xx>,
-			 <&hecc_ck>;
-	};
-
-	core_l4_clkdm: core_l4_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&cpefuse_fck>, <&ts_fck>, <&usbtll_fck>,
-			 <&usbtll_ick>, <&mmchs3_ick>, <&mmchs3_fck>,
-			 <&mmchs2_fck>, <&mmchs1_fck>, <&i2c3_fck>, <&i2c2_fck>,
-			 <&i2c1_fck>, <&mcspi4_fck>, <&mcspi3_fck>,
-			 <&mcspi2_fck>, <&mcspi1_fck>, <&uart2_fck>,
-			 <&uart1_fck>, <&hdq_fck>, <&mmchs2_ick>, <&mmchs1_ick>,
-			 <&hdq_ick>, <&mcspi4_ick>, <&mcspi3_ick>,
-			 <&mcspi2_ick>, <&mcspi1_ick>, <&i2c3_ick>, <&i2c2_ick>,
-			 <&i2c1_ick>, <&uart2_ick>, <&uart1_ick>, <&gpt11_ick>,
-			 <&gpt10_ick>, <&mcbsp5_ick>, <&mcbsp1_ick>,
-			 <&omapctrl_ick>, <&aes2_ick>, <&sha12_ick>,
-			 <&uart4_ick_am35xx>, <&uart4_fck_am35xx>;
-	};
-};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
deleted file mode 100644
index 14bbc438055f..000000000000
--- a/arch/arm/boot/dts/am4372.dtsi
+++ /dev/null
@@ -1,377 +0,0 @@
-/*
- * Device Tree Source for AM4372 SoC
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/am4.h>
-
-/ {
-	compatible = "ti,am4372", "ti,am43";
-	interrupt-parent = <&wakeupgen>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0>;
-	};
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-		spi0 = &qspi;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu: cpu@0 {
-			compatible = "arm,cortex-a9";
-			device_type = "cpu";
-			reg = <0>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_conf>;
-
-		opp50-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <950000 931000 969000>;
-			opp-supported-hw = <0xFF 0x01>;
-			opp-suspend;
-		};
-
-		opp100-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <1100000 1078000 1122000>;
-			opp-supported-hw = <0xFF 0x04>;
-		};
-
-		opp120-720000000 {
-			opp-hz = /bits/ 64 <720000000>;
-			opp-microvolt = <1200000 1176000 1224000>;
-			opp-supported-hw = <0xFF 0x08>;
-		};
-
-		oppturbo-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1260000 1234800 1285200>;
-			opp-supported-hw = <0xFF 0x10>;
-		};
-
-		oppnitro-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1325000 1298500 1351500>;
-			opp-supported-hw = <0xFF 0x20>;
-		};
-	};
-
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap4-mpu";
-			ti,hwmods = "mpu";
-			pm-sram = <&pm_sram_code
-				   &pm_sram_data>;
-		};
-	};
-
-	gic: interrupt-controller@48241000 {
-		compatible = "arm,cortex-a9-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48241000 0x1000>,
-		      <0x48240100 0x0100>;
-		interrupt-parent = <&gic>;
-	};
-
-	wakeupgen: interrupt-controller@48281000 {
-		compatible = "ti,omap4-wugen-mpu";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x48281000 0x1000>;
-		interrupt-parent = <&gic>;
-	};
-
-	scu: scu@48240000 {
-		compatible = "arm,cortex-a9-scu";
-		reg = <0x48240000 0x100>;
-	};
-
-	global_timer: timer@48240200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x48240200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&gic>;
-		clocks = <&mpu_periphclk>;
-	};
-
-	local_timer: timer@48240600 {
-		compatible = "arm,cortex-a9-twd-timer";
-		reg = <0x48240600 0x100>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&gic>;
-		clocks = <&mpu_periphclk>;
-	};
-
-	l2-cache-controller@48242000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x48242000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	ocp@44000000 {
-		compatible = "ti,am4372-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-		ti,no-idle;
-		reg = <0x44000000 0x400000
-		       0x44800000 0x400000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		l4_wkup: interconnect@44c00000 {
-			wkup_m3: wkup_m3@100000 {
-				compatible = "ti,am4372-wkup-m3";
-				reg = <0x100000 0x4000>,
-				      <0x180000	0x2000>;
-				reg-names = "umem", "dmem";
-				ti,hwmods = "wkup_m3";
-				ti,pm-firmware = "am335x-pm-firmware.elf";
-			};
-		};
-		l4_per: interconnect@48000000 {
-		};
-		l4_fast: interconnect@4a000000 {
-		};
-
-		emif: emif@4c000000 {
-			compatible = "ti,emif-am4372";
-			reg = <0x4c000000 0x1000000>;
-			ti,hwmods = "emif";
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			ti,no-idle;
-			sram = <&pm_sram_code
-				&pm_sram_data>;
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg =	<0x49000000 0x10000>;
-			reg-names = "edma3_cc";
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-				   <&edma_tptc2 0>;
-
-			ti,edma-memcpy-channels = <58 59>;
-		};
-
-		edma_tptc0: tptc@49800000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x49800000 0x100000>;
-			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc1: tptc@49900000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x49900000 0x100000>;
-			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc2: tptc@49a00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc2";
-			reg =	<0x49a00000 0x100000>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		target-module@47810000 {
-			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "mmc3";
-			reg = <0x478102fc 0x4>,
-			      <0x47810110 0x4>,
-			      <0x47810114 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
-					 SYSC_OMAP2_ENAWAKEUP |
-					 SYSC_OMAP2_SOFTRESET |
-					 SYSC_OMAP2_AUTOIDLE)>;
-			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-					<SYSC_IDLE_NO>,
-					<SYSC_IDLE_SMART>;
-			ti,syss-mask = <1>;
-			clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x47810000 0x1000>;
-
-			mmc3: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				ti,needs-special-reset;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0 0x1000>;
-			};
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x300>;
-			dmas = <&edma 36 0>;
-			dma-names = "rx";
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		aes: aes@53501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53501000 0xa0>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6 0>,
-				<&edma 5 0>;
-			dma-names = "tx", "rx";
-		};
-
-		des: des@53701000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x53701000 0xa0>;
-			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34 0>,
-				<&edma 33 0>;
-			dma-names = "tx", "rx";
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			dmas = <&edma 52 0>;
-			dma-names = "rxtx";
-			clocks = <&l3s_gclk>;
-			clock-names = "fck";
-			reg = <0x50000000 0x2000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			status = "disabled";
-		};
-
-		qspi: spi@47900000 {
-			compatible = "ti,am4372-qspi";
-			reg = <0x47900000 0x100>,
-			      <0x30000000 0x4000000>;
-			reg-names = "qspi_base", "qspi_mmap";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			interrupts = <0 138 0x4>;
-			num-cs = <4>;
-			status = "disabled";
-		};
-
-		dss: dss@4832a000 {
-			compatible = "ti,omap3-dss";
-			reg = <0x4832a000 0x200>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&disp_clk>;
-			clock-names = "fck";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc: dispc@4832a400 {
-				compatible = "ti,omap3-dispc";
-				reg = <0x4832a400 0x400>;
-				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-
-				max-memory-bandwidth = <230000000>;
-			};
-
-			rfbi: rfbi@4832a800 {
-				compatible = "ti,omap3-rfbi";
-				reg = <0x4832a800 0x100>;
-				ti,hwmods = "dss_rfbi";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-				status = "disabled";
-			};
-		};
-
-		ocmcram: ocmcram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x40000>; /* 256k */
-			ranges = <0x0 0x40300000 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			pm_sram_code: pm-sram-code@0 {
-				compatible = "ti,sram";
-				reg = <0x0 0x1000>;
-				protect-exec;
-			};
-
-			pm_sram_data: pm-sram-data@1000 {
-				compatible = "ti,sram";
-				reg = <0x1000 0x1000>;
-				pool;
-			};
-		};
-	};
-};
-
-#include "am437x-l4.dtsi"
-#include "am43xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
deleted file mode 100644
index 091356f2a8c1..000000000000
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ /dev/null
@@ -1,829 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for AM43xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&scm_clocks {
-	sys_clkin_ck: sys_clkin_ck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
-		ti,bit-shift = <31>;
-		reg = <0x0040>;
-	};
-
-	crystal_freq_sel_ck: crystal_freq_sel_ck@40 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <29>;
-		reg = <0x0040>;
-	};
-
-	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0040>;
-	};
-
-	adc_tsc_fck: adc_tsc_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan0_fck: dcan0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dcan1_fck: dcan1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp0_fck: mcasp0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	mcasp1_fck: mcasp1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex0_fck: smartreflex0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	smartreflex1_fck: smartreflex1_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	sha0_fck: sha0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	aes0_fck: aes0_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	rng_fck: rng_fck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm3_tbclk: ehrpwm3_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <4>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm4_tbclk: ehrpwm4_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <5>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm5_tbclk: ehrpwm5_tbclk@664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <6>;
-		reg = <0x0664>;
-	};
-};
-&prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	clk_rc32k_ck: clk_rc32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_24000000_ck: virt_24000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-	};
-
-	virt_25000000_ck: virt_25000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <25000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	tclkin_ck: tclkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	dpll_core_ck: dpll_core_ck@2d20 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-core-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_m4_ck: dpll_core_m4_ck@2d38 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d38>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m5_ck: dpll_core_m5_ck@2d3c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d3c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_m6_ck: dpll_core_m6_ck@2d40 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d40>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck@2d60 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@2d70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2d70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_periphclk: mpu_periphclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_mpu_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck@2da0 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2da0>, <0x2da4>, <0x2dac>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@2db0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_disp_ck: dpll_disp_ck@2e20 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
-	};
-
-	dpll_disp_m2_ck: dpll_disp_m2_ck@2e30 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_disp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e30>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		ti,set-rate-parent;
-	};
-
-	dpll_per_ck: dpll_per_ck@2de0 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-j-type-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2de0>, <0x2de4>, <0x2dec>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck@2df0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2df0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	clk_24mhz: clk_24mhz {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	clkdiv32k_ck: clkdiv32k_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&clk_24mhz>;
-		clock-mult = <1>;
-		clock-div = <732>;
-	};
-
-	clkdiv32k_ick: clkdiv32k_ick@2a38 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a38>;
-	};
-
-	sysclk_div: sysclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	pruss_ocp_gclk: pruss_ocp_gclk@4248 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
-		reg = <0x4248>;
-	};
-
-	clk_32k_tpm_ck: clk_32k_tpm_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	timer1_fck: timer1_fck@4200 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4200>;
-	};
-
-	timer2_fck: timer2_fck@4204 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4204>;
-	};
-
-	timer3_fck: timer3_fck@4208 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4208>;
-	};
-
-	timer4_fck: timer4_fck@420c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x420c>;
-	};
-
-	timer5_fck: timer5_fck@4210 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4210>;
-	};
-
-	timer6_fck: timer6_fck@4214 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4214>;
-	};
-
-	timer7_fck: timer7_fck@4218 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
-		reg = <0x4218>;
-	};
-
-	wdt1_fck: wdt1_fck@422c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
-		reg = <0x422c>;
-	};
-
-	l3_gclk: l3_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l4hs_gclk: l4hs_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3s_gclk: l3s_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l4ls_gclk: l4ls_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m4_div2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@4238 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
-		reg = <0x4238>;
-	};
-
-	dpll_clksel_mac_clk: dpll_clksel_mac_clk@4234 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_m5_ck>;
-		reg = <0x4234>;
-		ti,bit-shift = <2>;
-		ti,dividers = <2>, <5>;
-	};
-
-	clk_32k_mosc_ck: clk_32k_mosc_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@4240 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4240>;
-	};
-
-	mmc_clk: mmc_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@423c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x423c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck@423c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x423c>;
-		ti,max-div = <2>;
-	};
-
-	disp_clk: disp_clk@4244 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
-		reg = <0x4244>;
-		ti,set-rate-parent;
-	};
-
-	dpll_extdev_ck: dpll_extdev_ck@2e60 {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-clock";
-		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
-	};
-
-	dpll_extdev_m2_ck: dpll_extdev_m2_ck@2e70 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_extdev_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e70>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mux_synctimer32k_ck: mux_synctimer32k_ck@4230 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
-		reg = <0x4230>;
-	};
-
-	timer8_fck: timer8_fck@421c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x421c>;
-	};
-
-	timer9_fck: timer9_fck@4220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4220>;
-	};
-
-	timer10_fck: timer10_fck@4224 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4224>;
-	};
-
-	timer11_fck: timer11_fck@4228 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
-		reg = <0x4228>;
-	};
-
-	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m5_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&cpsw_50m_clkdiv>;
-		clock-mult = <1>;
-		clock-div = <10>;
-	};
-
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,am3-dpll-x2-clock";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_m4_ck: dpll_ddr_m4_ck@2db8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2db8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_clkdcoldo: dpll_per_clkdcoldo@2e14 {
-		#clock-cells = <0>;
-		compatible = "ti,fixed-factor-clock";
-		clocks = <&dpll_per_ck>;
-		ti,clock-mult = <1>;
-		ti,clock-div = <1>;
-		ti,autoidle-shift = <8>;
-		reg = <0x2e14>;
-		ti,invert-autoidle-bit;
-	};
-
-	dll_aging_clk_div: dll_aging_clk_div@4250 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin_ck>;
-		reg = <0x4250>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	div_core_25m_ck: div_core_25m_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sysclk_div>;
-		clock-mult = <1>;
-		clock-div = <8>;
-	};
-
-	func_12m_clk: func_12m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	vtp_clk_div: vtp_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usbphy_32khz_clkmux: usbphy_32khz_clkmux@4260 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
-		reg = <0x4260>;
-	};
-
-	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k@2a40 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a40>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@2a48 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&usbphy_32khz_clkmux>;
-		ti,bit-shift = <8>;
-		reg = <0x2a48>;
-	};
-};
-
-&prcm {
-	wkup_cm: wkup-cm@2800 {
-		compatible = "ti,omap4-cm";
-		reg = <0x2800 0x400>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x2800 0x400>;
-
-		l3s_tsc_clkctrl: l3s-tsc-clkctrl@120 {
-			compatible = "ti,clkctrl";
-			reg = <0x120 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l4_wkup_aon_clkctrl: l4-wkup-aon-clkctrl@228 {
-			compatible = "ti,clkctrl";
-			reg = <0x228 0xc>;
-			#clock-cells = <2>;
-		};
-
-		l4_wkup_clkctrl: l4-wkup-clkctrl@220 {
-			compatible = "ti,clkctrl";
-			reg = <0x220 0x4>, <0x328 0x44>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	mpu_cm: mpu-cm@8300 {
-		compatible = "ti,omap4-cm";
-		reg = <0x8300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8300 0x100>;
-
-		mpu_clkctrl: mpu-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	gfx_l3_cm: gfx-l3-cm@8400 {
-		compatible = "ti,omap4-cm";
-		reg = <0x8400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8400 0x100>;
-
-		gfx_l3_clkctrl: gfx-l3-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4_rtc_cm: l4-rtc-cm@8500 {
-		compatible = "ti,omap4-cm";
-		reg = <0x8500 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8500 0x100>;
-
-		l4_rtc_clkctrl: l4-rtc-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	per_cm: per-cm@8800 {
-		compatible = "ti,omap4-cm";
-		reg = <0x8800 0xc00>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x8800 0xc00>;
-
-		l3_clkctrl: l3-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x3c>, <0x78 0x2c>;
-			#clock-cells = <2>;
-		};
-
-		l3s_clkctrl: l3s-clkctrl@68 {
-			compatible = "ti,clkctrl";
-			reg = <0x68 0xc>, <0x220 0x4c>;
-			#clock-cells = <2>;
-		};
-
-		pruss_ocp_clkctrl: pruss-ocp-clkctrl@320 {
-			compatible = "ti,clkctrl";
-			reg = <0x320 0x4>;
-			#clock-cells = <2>;
-		};
-
-		l4ls_clkctrl: l4ls-clkctrl@420 {
-			compatible = "ti,clkctrl";
-			reg = <0x420 0x1a4>;
-			#clock-cells = <2>;
-		};
-
-		emif_clkctrl: emif-clkctrl@720 {
-			compatible = "ti,clkctrl";
-			reg = <0x720 0x4>;
-			#clock-cells = <2>;
-		};
-
-		dss_clkctrl: dss-clkctrl@a20 {
-			compatible = "ti,clkctrl";
-			reg = <0xa20 0x4>;
-			#clock-cells = <2>;
-		};
-
-		cpsw_125mhz_clkctrl: cpsw-125mhz-clkctrl@b20 {
-			compatible = "ti,clkctrl";
-			reg = <0xb20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
deleted file mode 100644
index d51007c3e8c4..000000000000
--- a/arch/arm/boot/dts/am5718.dtsi
+++ /dev/null
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include "dra72x.dtsi"
-
-/ {
-	compatible = "ti,am5718", "ti,dra7";
-};
-
-/*
- * These modules are not present on AM5718
- *
- * ATL
- * VCP1, VCP2
- * MLB
- * ISS
- * USB3, USB4
- */
-
-&usb3_tm {
-	status = "disabled";
-};
-
-&usb4_tm {
-	status = "disabled";
-};
-
-&atl_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
deleted file mode 100644
index a064f13b3880..000000000000
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "am57xx-idk-common.dtsi"
-
-/ {
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	status-leds {
-		compatible = "gpio-leds";
-		cpu0-led {
-			label = "status0:red:cpu0";
-			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu0";
-		};
-
-		usr0-led {
-			label = "status0:green:usr";
-			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		heartbeat-led {
-			label = "status0:blue:heartbeat";
-			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		cpu1-led {
-			label = "status1:red:cpu1";
-			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu1";
-		};
-
-		usr1-led {
-			label = "status1:green:usr";
-			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		mmc0-led {
-			label = "status1:blue:mmc0";
-			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	idk-leds {
-		status = "disabled";
-		compatible = "gpio-leds";
-		red0-led {
-			label = "idk:red0";
-			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green0-led {
-			label = "idk:green0";
-			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue0-led {
-			label = "idk:blue0";
-			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red1-led {
-			label = "idk:red1";
-			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green1-led {
-			label = "idk:green1";
-			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue1-led {
-			label = "idk:blue1";
-			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red2-led {
-			label = "idk:red2";
-			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green2-led {
-			label = "idk:green2";
-			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue2-led {
-			label = "idk:blue2";
-			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		red3-led {
-			label = "idk:red3";
-			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		green3-led {
-			label = "idk:green3";
-			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		blue3-led {
-			label = "idk:blue3";
-			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-&extcon_usb2 {
-	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
-};
-
-&sn65hvs882 {
-	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-};
-
-&pcie1_rc {
-	status = "okay";
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi
deleted file mode 100644
index 5e129759d04a..000000000000
--- a/arch/arm/boot/dts/am5748.dtsi
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include "dra76x.dtsi"
-
-/ {
-	compatible = "ti,am5748", "ti,dra762", "ti,dra7";
-};
-
-/*
- * These modules are not present on AM5748
- *
- * EVE1, EVE2
- * ATL
- * VCP1, VCP2
- * MLB
- * ISS
- * USB3, USB4
- */
-
-&usb3_tm {
-	status = "disabled";
-};
-
-&usb4_tm {
-	status = "disabled";
-};
-
-&atl_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/amazon/Makefile b/arch/arm/boot/dts/amazon/Makefile
new file mode 100644
index 000000000000..58af5c4846ef
--- /dev/null
+++ b/arch/arm/boot/dts/amazon/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
+dtb-$(CONFIG_ARCH_ALPINE) += \
+	alpine-db.dtb
diff --git a/arch/arm/boot/dts/alpine-db.dts b/arch/arm/boot/dts/amazon/alpine-db.dts
index dfb5a0802273..dfb5a0802273 100644
--- a/arch/arm/boot/dts/alpine-db.dts
+++ b/arch/arm/boot/dts/amazon/alpine-db.dts
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi
index d3036ea823d1..90bd12feac01 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -91,7 +91,7 @@
 		};
 
 		/* Interrupt Controller */
-		gic: gic@fb001000 {
+		gic: interrupt-controller@fb001000 {
 			compatible = "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
 			#size-cells = <0>;
@@ -126,7 +126,7 @@
 				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		uart0: uart@fd883000 {
+		uart0: serial@fd883000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd883000 0x0 0x1000>;
 			clock-frequency = <375000000>;
@@ -135,7 +135,7 @@
 			reg-io-width = <4>;
 		};
 
-		uart1: uart@fd884000 {
+		uart1: serial@fd884000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd884000 0x0 0x1000>;
 			clock-frequency = <375000000>;
@@ -154,7 +154,7 @@
 			reg = <0x0 0xfbc00000 0x0 0x100000>;
 			interrupt-map-mask = <0xf800 0 0 7>;
 			/* Add legacy interrupts for SATA devices only */
-			interrupt-map =	<0x4000 0 0 1 &gic 0 43 4>,
+			interrupt-map = <0x4000 0 0 1 &gic 0 43 4>,
 					<0x4800 0 0 1 &gic 0 44 4>;
 
 			/* 32 bit non prefetchable memory space */
@@ -167,7 +167,6 @@
 		msix: msix@fbe00000 {
 			compatible = "al,alpine-msix";
 			reg = <0x0 0xfbe00000 0x0 0x100000>;
-			interrupt-controller;
 			msi-controller;
 			al,msi-base-spi = <96>;
 			al,msi-num-spis = <64>;
diff --git a/arch/arm/boot/dts/amlogic/Makefile b/arch/arm/boot/dts/amlogic/Makefile
new file mode 100644
index 000000000000..3c8a1e88b386
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_MESON8) += \
+	meson8-minix-neo-x8.dtb \
+	meson8-fernsehfee3.dtb \
+	meson8b-ec100.dtb \
+	meson8b-mxq.dtb \
+	meson8b-odroidc1.dtb \
+	meson8m2-mxiii-plus.dtb
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/amlogic/meson.dtsi
index c4447f6c8b2c..28ec2c821cdc 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/amlogic/meson.dtsi
@@ -5,17 +5,16 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/sound/meson-aiu.h>
 
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
-	L2: l2-cache-controller@c4200000 {
-		compatible = "arm,pl310-cache";
-		reg = <0xc4200000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
 	};
 
 	soc {
@@ -24,7 +23,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		cbus: cbus@c1100000 {
+		cbus: bus@c1100000 {
 			compatible = "simple-bus";
 			reg = <0xc1100000 0x200000>;
 			#address-cells = <1>;
@@ -38,6 +37,17 @@
 				reg = <0x4000 0x400>;
 			};
 
+			aiu: audio-controller@5400 {
+				compatible = "amlogic,aiu";
+				#sound-dai-cells = <2>;
+				sound-name-prefix = "AIU";
+				reg = <0x5400 0x2ac>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "i2s", "spdif";
+				status = "disabled";
+			};
+
 			assist: assist@7c00 {
 				compatible = "amlogic,meson-mx-assist", "syscon";
 				reg = <0x7c00 0x200>;
@@ -49,14 +59,15 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				fifo-size = <128>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -94,7 +105,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -140,6 +151,13 @@
 				status = "disabled";
 			};
 
+			sdhc: mmc@8e00 {
+				compatible = "amlogic,meson-mx-sdhc";
+				reg = <0x8e00 0x42>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
 			gpio_intc: interrupt-controller@9880 {
 				compatible = "amlogic,meson-gpio-intc";
 				reg = <0x9880 0x10>;
@@ -165,6 +183,13 @@
 			};
 		};
 
+		L2: cache-controller@c4200000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xc4200000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
 		periph: bus@c4300000 {
 			compatible = "simple-bus";
 			reg = <0xc4300000 0x10000>;
@@ -181,22 +206,29 @@
 			};
 		};
 
-		aobus: aobus@c8100000 {
+		aobus: bus@c8100000 {
 			compatible = "simple-bus";
 			reg = <0xc8100000 0x100000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xc8100000 0x100000>;
 
+			ao_arc_rproc: remoteproc@1c {
+				compatible = "amlogic,meson-mx-ao-arc";
+				reg = <0x1c 0x8>, <0x38 0x8>;
+				reg-names = "remap", "cpu";
+				status = "disabled";
+			};
+
 			ir_receiver: ir-receiver@480 {
-				compatible= "amlogic,meson6-ir";
+				compatible = "amlogic,meson6-ir";
 				reg = <0x480 0x20>;
 				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -223,20 +255,19 @@
 
 		usb0: usb@c9040000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc9040000 0x40000>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb0_phy>;
 			phy-names = "usb2-phy";
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <500>;
+			g-tx-fifo-size = <256 192 128 128 128>;
 			dr_mode = "host";
 			status = "disabled";
 		};
 
 		usb1: usb@c90c0000 {
 			compatible = "snps,dwc2";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0xc90c0000 0x40000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb1_phy>;
@@ -267,7 +298,7 @@
 			reg = <0xd9040000 0x10000>;
 		};
 
-		secbus: secbus@da000000 {
+		secbus: bus@da000000 {
 			compatible = "simple-bus";
 			reg = <0xda000000 0x6000>;
 			#address-cells = <1>;
@@ -282,4 +313,18 @@
 			};
 		};
 	};
+
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&saradc 8>;
+		io-channel-names = "sensor-channel";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
 }; /* end of / */
diff --git a/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
new file mode 100644
index 000000000000..4e52447d51bd
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8-fernsehfee3.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+// Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Fernsehfee 3.0";
+	compatible = "tcu,fernsehfee3", "amlogic,meson8";
+
+	aliases {
+		serial0 = &uart_AO;
+		gpiochip0 = &gpio;
+		gpiochip1 = &gpio_ao;
+		i2c0 = &i2c_AO;
+		i2c1 = &i2c_B;
+		mmc0 = &sdhc;
+		mmc1 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;  /* 1 GiB */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/*
+			 * The power LED can be turned red, otherwise it is green.
+			 */
+			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+
+	vcc_5v: regulator-5v {
+		/* 5V rail, always on as long as the system is running */
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-3v3 {
+		/* Chipown AP2420 step-down converter */
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v>;
+	};
+
+	wifi_3v3: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V-WIFI";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+		gpio = <&gpio GPIOX_11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vcck>;
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101A (0x02430c54) */
+			reg = <0>;
+
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_AO {
+	status = "okay";
+	pinctrl-0 = <&i2c_ao_pins>;
+	pinctrl-names = "default";
+
+	pmic@32 {
+		compatible = "ricoh,rn5t618";
+		reg = <0x32>;
+		system-power-controller;
+
+		regulators {
+			vcck: DCDC1 {
+				regulator-name = "VCCK";
+				regulator-min-microvolt = <825000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vddee: DCDC2 {
+				/* the output is also used as VDDAO */
+				regulator-name = "VDD_EE";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			DCDC3 {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO1 {
+				regulator-name = "VDDIO_AO28";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO2 {
+				regulator-name = "VDDIO_AO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc1v8_usb: LDO3 {
+				regulator-name = "VCC1V8_USB";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			LDO4 {
+				/* This one appears to be unused */
+				regulator-name = "VCC2V8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			LDO5 {
+				regulator-name = "AVDD1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC1 {
+				regulator-name = "VDD_LDO";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDORTC2 {
+				regulator-name = "RTC_0V9";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		/* Fairchild FM24C08A */
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+		wp-gpios = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>;
+		num-addresses = <4>;
+	};
+};
+
+&i2c_B {
+	status = "okay";
+	pinctrl-0 = <&i2c_b_pins>;
+	pinctrl-names = "default";
+
+	/* TODO: SiI9293 HDMI receiver @ 0x39 */
+};
+
+&mali {
+	mali-supply = <&vddee>;
+};
+
+&sdhc {
+	status = "okay";
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	/* eMMC */
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
+&sdio {
+	status = "okay";
+	pinctrl-0 = <&sd_b_pins>;
+
+	/* SD card */
+	slot@1 {
+		compatible = "mmc-slot";
+		reg = <1>;
+		status = "okay";
+
+		bus-width = <4>;
+		cap-mmc-highspeed;
+		cap-sd-highspeed;
+		disable-wp;
+
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+		vmmc-supply = <&vcc_3v3>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi: wifi@1 {
+		/* Realtek RTL8188 2.4GHz WiFi module */
+		compatible = "usbbda,179";
+		reg = <1>;
+		vdd-supply = <&wifi_3v3>;
+	};
+};
+
+&usb1_phy {
+	status = "okay";
+	phy-supply = <&vcc1v8_usb>;
+};
+
+&ir_receiver {
+	status = "okay";
+	pinctrl-0 = <&ir_recv_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
index 61ec929ab86e..62987eadc747 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/amlogic/meson8-minix-neo-x8.dts
@@ -19,7 +19,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
@@ -27,7 +27,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue {
+		led-blue {
 			label = "x8:blue:power";
 			gpios = <&gpio_ao GPIO_TEST_N GPIO_ACTIVE_HIGH>;
 		};
@@ -65,7 +65,7 @@
 	pinctrl-0 = <&spi_nor_pins>;
 	pinctrl-names = "default";
 
-	spi-flash@0 {
+	flash@0 {
 		compatible = "mxicy,mx25l1606e";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -93,5 +93,6 @@
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_pins>;
-	pnictrl-names = "default";
+	pinctrl-names = "default";
+	phy-mode = "rmii";
 };
diff --git a/arch/arm/boot/dts/amlogic/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi
new file mode 100644
index 000000000000..a609b5a0fda4
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8.dtsi
@@ -0,0 +1,833 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ */
+
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "meson.dtsi"
+
+/ {
+	model = "Amlogic Meson8 SoC";
+	compatible = "amlogic,meson8";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+			enable-method = "amlogic,meson8-smp";
+			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-96000000 {
+			opp-hz = /bits/ 64 <96000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <875000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <1025000>;
+		};
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-1800000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1125000>;
+		};
+		opp-1992000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <1992000000>;
+			opp-microvolt = <1150000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-182142857 {
+			opp-hz = /bits/ 64 <182142857>;
+			opp-microvolt = <1150000>;
+		};
+		opp-318750000 {
+			opp-hz = /bits/ 64 <318750000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1150000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1150000>;
+			turbo-mode;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* 2 MiB reserved for Hardware ROM Firmware? */
+		hwrom@0 {
+			reg = <0x0 0x200000>;
+			no-map;
+		};
+
+		/*
+		 * 1 MiB reserved for the "ARM Power Firmware": this is ARM
+		 * code which is responsible for system suspend. It loads a
+		 * piece of ARC code ("arc_power" in the vendor u-boot tree)
+		 * into SRAM, executes that and shuts down the (last) ARM core.
+		 * The arc_power firmware then checks various wakeup sources
+		 * (IR remote receiver, HDMI CEC, WIFI and Bluetooth wakeup or
+		 * simply the power key) and re-starts the ARM core once it
+		 * detects a wakeup request.
+		 */
+		power-firmware@4f00000 {
+			reg = <0x4f00000 0x100000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		soc-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal_sensor>;
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	mmcbus: bus@c8000000 {
+		compatible = "simple-bus";
+		reg = <0xc8000000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xc8000000 0x8000>;
+
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
+		dmcbus: bus@6000 {
+			compatible = "simple-bus";
+			reg = <0x6000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x400>;
+
+			canvas: video-lut@20 {
+				compatible = "amlogic,meson8-canvas",
+					     "amlogic,canvas";
+				reg = <0x20 0x14>;
+			};
+		};
+	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1",
+					  "pp2", "ppmmu2", "pp4", "ppmmu4",
+					  "pp5", "ppmmu5", "pp6", "ppmmu6";
+			resets = <&reset RESET_MALI>;
+
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+
+			assigned-clocks = <&clkc CLKID_MALI>;
+			assigned-clock-rates = <318750000>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+}; /* end of / */
+
+&aiu {
+	compatible = "amlogic,aiu-meson8", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+	pmu: pmu@e0 {
+		compatible = "amlogic,meson8-pmu", "syscon";
+		reg = <0xe0 0x18>;
+	};
+
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson8-aobus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x14 0x1c>;
+
+		gpio_ao: bank@0 {
+			reg = <0x0 0x4>,
+			      <0x18 0x4>,
+			      <0x10 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 16>;
+		};
+
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_ch01_ao";
+				function = "i2s_ao";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-pull-up;
+			};
+		};
+
+		i2c_ao_pins: i2c_mst_ao {
+			mux {
+				groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+				function = "i2c_mst_ao";
+				bias-disable;
+			};
+		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+				bias-disable;
+			};
+		};
+
+		pwm_f_ao_pins: pwm-f-ao {
+			mux {
+				groups = "pwm_f_ao";
+				function = "pwm_f_ao";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ao_arc_rproc {
+	compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+	amlogic,secbus2 = <&secbus2>;
+	sram = <&ao_arc_sram>;
+	resets = <&reset RESET_MEDIA_CPU>;
+	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
+&cbus {
+	reset: reset-controller@4404 {
+		compatible = "amlogic,meson8b-reset";
+		reg = <0x4404 0x9c>;
+		#reset-cells = <1>;
+	};
+
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
+	pwm_ef: pwm@86c0 {
+		compatible = "amlogic,meson8-pwm-v2";
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
+		reg = <0x86c0 0x10>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clock-measure@8758 {
+		compatible = "amlogic,meson8-clk-measure";
+		reg = <0x8758 0x1c>;
+	};
+
+	pinctrl_cbus: pinctrl@8030 {
+		compatible = "amlogic,meson8-cbus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x8030 0x108>;
+
+		gpio: bank@80 {
+			reg = <0x80 0x28>,
+			      <0xb8 0x18>,
+			      <0xf0 0x18>,
+			      <0x00 0x30>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 120>;
+		};
+
+		i2c_b_pins: i2c-b {
+			mux {
+				groups = "i2c_sda_b", "i2c_sck_b";
+				function = "i2c_b";
+				bias-disable;
+			};
+		};
+
+		sd_a_pins: sd-a {
+			mux {
+				groups = "sd_d0_a", "sd_d1_a", "sd_d2_a",
+					"sd_d3_a", "sd_clk_a", "sd_cmd_a";
+				function = "sd_a";
+				bias-disable;
+			};
+		};
+
+		sd_b_pins: sd-b {
+			mux {
+				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
+				function = "sd_b";
+				bias-disable;
+			};
+		};
+
+		sd_c_pins: sd-c {
+			mux {
+				groups = "sd_d0_c", "sd_d1_c", "sd_d2_c",
+					"sd_d3_c", "sd_clk_c", "sd_cmd_c";
+				function = "sd_c";
+				bias-disable;
+			};
+		};
+
+		sdxc_a_pins: sdxc-a {
+			mux {
+				groups = "sdxc_d0_a", "sdxc_d13_a",
+					 "sdxc_clk_a", "sdxc_cmd_a";
+				function = "sdxc_a";
+				bias-pull-up;
+			};
+		};
+
+		sdxc_b_pins: sdxc-b {
+			mux {
+				groups = "sdxc_d0_b", "sdxc_d13_b",
+					 "sdxc_clk_b", "sdxc_cmd_b";
+				function = "sdxc_b";
+				bias-pull-up;
+			};
+		};
+
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					"sdxc_clk_c", "sdxc_cmd_c",
+					"sdxc_d47_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
+		spdif_out_pins: spdif-out {
+			mux {
+				groups = "spdif_out";
+				function = "spdif";
+				bias-disable;
+			};
+		};
+
+		spi_nor_pins: nor {
+			mux {
+				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
+				function = "nor";
+				bias-disable;
+			};
+		};
+
+		eth_pins: ethernet {
+			mux {
+				groups = "eth_tx_clk_50m", "eth_tx_en",
+					 "eth_txd1", "eth_txd0",
+					 "eth_rx_clk_in", "eth_rx_dv",
+					 "eth_rxd1", "eth_rxd0", "eth_mdio",
+					 "eth_mdc";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		pwm_e_pins: pwm-e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+				bias-disable;
+			};
+		};
+
+		uart_a1_pins: uart-a1 {
+			mux {
+				groups = "uart_tx_a1",
+				       "uart_rx_a1";
+				function = "uart_a";
+				bias-pull-up;
+			};
+		};
+
+		uart_a1_cts_rts_pins: uart-a1-cts-rts {
+			mux {
+				groups = "uart_cts_a1",
+				       "uart_rts_a1";
+				function = "uart_a";
+				bias-disable;
+			};
+		};
+
+		xtal_32k_out_pins: xtal-32k-out {
+			mux {
+				groups = "xtal_32k_out";
+				function = "xtal";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ahb_sram {
+	ao_arc_sram: aoarc-sram@0 {
+		compatible = "amlogic,meson8-ao-arc-sram";
+		reg = <0x0 0x8000>;
+		pool;
+	};
+
+	smp-sram@1ff80 {
+		compatible = "amlogic,meson8-smp-sram";
+		reg = <0x1ff80 0x8>;
+	};
+};
+
+&efuse {
+	compatible = "amlogic,meson8-efuse";
+	clocks = <&clkc CLKID_EFUSE>;
+	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>;
+	clock-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson8-gpio-intc", "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <364285714>;
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&L2 {
+	arm,data-latency = <3 3 3>;
+	arm,tag-latency = <2 2 2>;
+	arm,filter-ranges = <0x100000 0xc0000000>;
+	prefetch-data = <1>;
+	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
+	arm,shared-override;
+};
+
+&periph {
+	scu@0 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x0 0x100>;
+	};
+
+	timer@200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x200 0x20>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+
+		/*
+		 * the arm_global_timer driver currently does not handle clock
+		 * rate changes. Keep it disabled for now.
+		 */
+		status = "disabled";
+	};
+
+	timer@600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+	};
+};
+
+&pwm_ab {
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_cd {
+	compatible = "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&rtc {
+	compatible = "amlogic,meson8-rtc";
+	resets = <&reset RESET_RTC>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
+&secbus {
+	secbus2: system-controller@4000 {
+		compatible = "amlogic,meson8-secbus2", "syscon";
+		reg = <0x4000 0x2000>;
+	};
+};
+
+&sdio {
+	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
+&spifc {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&usb0 {
+	compatible = "amlogic,meson8-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb1 {
+	compatible = "amlogic,meson8-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
index bed1dfef1985..236999548094 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-ec100.dts
@@ -22,15 +22,18 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
 		pal-switch {
@@ -65,15 +68,10 @@
 		timeout-ms = <20000>;
 	};
 
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&saradc 8>;
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "ec100:red:power";
 			/*
 			 * Needs to go LOW (together with the poweroff GPIO)
@@ -96,6 +94,36 @@
 		#clock-cells = <0>;
 	};
 
+	sound {
+		compatible = "amlogic,gx-sound-card";
+		model = "M8B-EC100";
+
+		clocks = <&clkc CLKID_MPLL0>,
+			 <&clkc CLKID_MPLL1>,
+			 <&clkc CLKID_MPLL2>;
+
+		assigned-clocks = <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>,
+				  <&clkc CLKID_MPLL2>;
+		assigned-clock-rates = <270950400>,
+				       <294912000>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+			dai-format = "i2s";
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&rt5640>;
+			};
+		};
+	};
+
 	usb_vbus: regulator-usb-vbus {
 		/*
 		 * Silergy SY6288CCAC-GP 2A Power Distribution Switch.
@@ -148,7 +176,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -232,7 +260,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -242,6 +270,14 @@
 	};
 };
 
+&aiu {
+	status = "okay";
+
+	pinctrl-0 = <&i2s_am_clk_pins>, <&i2s_out_ao_clk_pins>,
+		    <&i2s_out_lr_clk_pins>, <&i2s_out_ch01_ao_pins>;
+	pinctrl-names = "default";
+};
+
 &cpu0 {
 	cpu-supply = <&vcck>;
 };
@@ -283,9 +319,19 @@
 
 	rt5640: codec@1c {
 		compatible = "realtek,rt5640";
+
 		reg = <0x1c>;
+
+		#sound-dai-cells = <0>;
+
 		interrupt-parent = <&gpio_intc>;
 		interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+
+		/*
+		 * TODO: realtek,ldo1-en-gpios is connected to GPIO_BSD_EN.
+		 * We currently cannot configure this pin correctly.
+		 * Luckily for us it's in the "right" state by default.
+		 */
 		realtek,in1-differential;
 	};
 };
@@ -299,6 +345,26 @@
 	vref-supply = <&vcc_1v8>;
 };
 
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <50000000>;
+
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
 &sdio {
 	status = "okay";
 
@@ -365,7 +431,7 @@
 			  "NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)",
 			  "NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)",
 			  "NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)",
-			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "SPI_CS",
+			  "nWE_S1 NAND_nWE (EMMC)",  "", "", "", "SPI_CS",
 			  /* Bank DIF */
 			  "RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV",
 			  "RMII_50M_IN", "GPIODIF_4", "GPIODIF_5",
@@ -377,8 +443,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &rtc {
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
index 6e39ad52e42d..0bca0b33eea2 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-mxq.dts
@@ -22,16 +22,11 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&saradc 8>;
-	};
-
 	vcck: regulator-vcck {
 		compatible = "pwm-regulator";
 
@@ -39,6 +34,8 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
+		pwm-supply = <&vcc_5v>;
+
 		pwms = <&pwm_cd 0 1148 0>;
 		pwm-dutycycle-range = <100 0>;
 
@@ -84,7 +81,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&vcc_5v>;
+		pwm-supply = <&vcc_5v>;
 
 		pwms = <&pwm_cd 1 1148 0>;
 		pwm-dutycycle-range = <100 0>;
@@ -165,8 +162,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &uart_AO {
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
index a24eccc354b9..1cd2093202ca 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/amlogic/meson8b-odroidc1.dts
@@ -15,20 +15,26 @@
 	aliases {
 		serial0 = &uart_AO;
 		mmc0 = &sd_card_slot;
+		mmc1 = &sdhc;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "c1:blue:alive";
 			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
@@ -79,11 +85,6 @@
 			  1800000 1>;
 	};
 
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&saradc 8>;
-	};
-
 	rtc32k_xtal: rtc32k-xtal-clk {
 		/* X3 in the schematics */
 		compatible = "fixed-clock";
@@ -130,7 +131,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 0 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -162,7 +163,7 @@
 		regulator-min-microvolt = <860000>;
 		regulator-max-microvolt = <1140000>;
 
-		vin-supply = <&p5v0>;
+		pwm-supply = <&p5v0>;
 
 		pwms = <&pwm_cd 1 12218 0>;
 		pwm-dutycycle-range = <91 0>;
@@ -202,9 +203,8 @@
 	pinctrl-0 = <&eth_rgmii_pins>;
 	pinctrl-names = "default";
 
-	phy-mode = "rgmii";
 	phy-handle = <&eth_phy>;
-	amlogic,tx-delay-ns = <4>;
+	phy-mode = "rgmii-id";
 
 	nvmem-cells = <&ethernet_mac_address>;
 	nvmem-cell-names = "mac-address";
@@ -219,7 +219,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
 
 			interrupt-parent = <&gpio_intc>;
@@ -281,19 +281,6 @@
 			  "J7 Header Pin 6", "J7 Header Pin 5",
 			  "J7 Header Pin 7", "HDMI_CEC",
 			  "SYS_LED", "", "";
-
-	/*
-	 * WARNING: The USB Hub on the Odroid-C1/C1+ needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller.
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub {
-		gpio-hog;
-		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
 };
 
 &ir_receiver {
@@ -311,6 +298,26 @@
 	vref-supply = <&vcc_1v8>;
 };
 
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
 &sdio {
 	status = "okay";
 
@@ -340,8 +347,6 @@
 	status = "okay";
 	pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>;
-	clock-names = "clkin0", "clkin1";
 };
 
 &rtc {
@@ -361,5 +366,16 @@
 };
 
 &usb1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	hub@1 {
+		/* Genesys Logic GL852G usb hub */
+		compatible = "usb5e3,610";
+		reg = <1>;
+		vdd-supply = <&p5v0>;
+		reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+	};
 };
diff --git a/arch/arm/boot/dts/amlogic/meson8b.dtsi b/arch/arm/boot/dts/amlogic/meson8b.dtsi
new file mode 100644
index 000000000000..2d77b9876bf4
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8b.dtsi
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <dt-bindings/clock/meson8-ddr-clkc.h>
+#include <dt-bindings/clock/meson8b-clkc.h>
+#include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "meson.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x200>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu1: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x201>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu2: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x202>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+
+		cpu3: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			next-level-cache = <&L2>;
+			reg = <0x203>;
+			enable-method = "amlogic,meson8b-smp";
+			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+			operating-points-v2 = <&cpu_opp_table>;
+			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-96000000 {
+			opp-hz = /bits/ 64 <96000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-192000000 {
+			opp-hz = /bits/ 64 <192000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-504000000 {
+			opp-hz = /bits/ 64 <504000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <860000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1320000000 {
+			opp-hz = /bits/ 64 <1320000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1488000000 {
+			opp-hz = /bits/ 64 <1488000000>;
+			opp-microvolt = <1140000>;
+		};
+		opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-microvolt = <1140000>;
+		};
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-255000000 {
+			opp-hz = /bits/ 64 <255000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-364285714 {
+			opp-hz = /bits/ 64 <364285714>;
+			opp-microvolt = <1100000>;
+		};
+		opp-425000000 {
+			opp-hz = /bits/ 64 <425000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-510000000 {
+			opp-hz = /bits/ 64 <510000000>;
+			opp-microvolt = <1100000>;
+		};
+		opp-637500000 {
+			opp-hz = /bits/ 64 <637500000>;
+			opp-microvolt = <1100000>;
+			turbo-mode;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* 2 MiB reserved for Hardware ROM Firmware? */
+		hwrom@0 {
+			reg = <0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	thermal-zones {
+		soc-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal_sensor>;
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	mmcbus: bus@c8000000 {
+		compatible = "simple-bus";
+		reg = <0xc8000000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xc8000000 0x8000>;
+
+		ddr_clkc: clock-controller@400 {
+			compatible = "amlogic,meson8b-ddr-clkc";
+			reg = <0x400 0x20>;
+			clocks = <&xtal>;
+			clock-names = "xtal";
+			#clock-cells = <1>;
+		};
+
+		dmcbus: bus@6000 {
+			compatible = "simple-bus";
+			reg = <0x6000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x400>;
+
+			canvas: video-lut@48 {
+				compatible = "amlogic,meson8b-canvas",
+					     "amlogic,canvas";
+				reg = <0x48 0x14>;
+			};
+		};
+	};
+
+	apb: bus@d0000000 {
+		compatible = "simple-bus";
+		reg = <0xd0000000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0xd0000000 0x200000>;
+
+		mali: gpu@c0000 {
+			compatible = "amlogic,meson8b-mali", "arm,mali-450";
+			reg = <0xc0000 0x40000>;
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp", "gpmmu", "pp", "pmu",
+					  "pp0", "ppmmu0", "pp1", "ppmmu1";
+			resets = <&reset RESET_MALI>;
+			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+			clock-names = "bus", "core";
+			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+		};
+	};
+}; /* end of / */
+
+&aiu {
+	compatible = "amlogic,aiu-meson8b", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
+&aobus {
+	pmu: pmu@e0 {
+		compatible = "amlogic,meson8b-pmu", "syscon";
+		reg = <0xe0 0x18>;
+	};
+
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson8b-aobus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x14 0x1c>;
+
+		gpio_ao: bank@0 {
+			reg = <0x0 0x4>,
+			      <0x18 0x4>,
+			      <0x10 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_aobus 0 0 16>;
+		};
+
+		i2s_am_clk_pins: i2s-am-clk-out {
+			mux {
+				groups = "i2s_am_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ao_clk_pins: i2s-ao-clk-out {
+			mux {
+				groups = "i2s_ao_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_lr_clk_pins: i2s-lr-clk-out {
+			mux {
+				groups = "i2s_lr_clk_out";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		i2s_out_ch01_ao_pins: i2s-out-ch01 {
+			mux {
+				groups = "i2s_out_01";
+				function = "i2s";
+				bias-disable;
+			};
+		};
+
+		spdif_out_1_pins: spdif-out-1 {
+			mux {
+				groups = "spdif_out_1";
+				function = "spdif_1";
+				bias-disable;
+			};
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+				bias-pull-up;
+			};
+		};
+
+		ir_recv_pins: remote {
+			mux {
+				groups = "remote_input";
+				function = "remote";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ao_arc_rproc {
+	compatible = "amlogic,meson8b-ao-arc", "amlogic,meson-mx-ao-arc";
+	amlogic,secbus2 = <&secbus2>;
+	sram = <&ao_arc_sram>;
+	resets = <&reset RESET_MEDIA_CPU>;
+	clocks = <&clkc CLKID_AO_MEDIA_CPU>;
+};
+
+&cbus {
+	reset: reset-controller@4404 {
+		compatible = "amlogic,meson8b-reset";
+		reg = <0x4404 0x9c>;
+		#reset-cells = <1>;
+	};
+
+	analog_top: analog-top@81a8 {
+		compatible = "amlogic,meson8b-analog-top", "syscon";
+		reg = <0x81a8 0x14>;
+	};
+
+	pwm_ef: pwm@86c0 {
+		compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+		reg = <0x86c0 0x10>;
+		clocks = <&xtal>,
+			 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+			 <&clkc CLKID_FCLK_DIV4>,
+			 <&clkc CLKID_FCLK_DIV3>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	clock-measure@8758 {
+		compatible = "amlogic,meson8b-clk-measure";
+		reg = <0x8758 0x1c>;
+	};
+
+	pinctrl_cbus: pinctrl@8030 {
+		compatible = "amlogic,meson8b-cbus-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x8030 0x108>;
+
+		gpio: bank@80 {
+			reg = <0x80 0x28>,
+			      <0xb8 0x18>,
+			      <0xf0 0x18>,
+			      <0x00 0x38>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl_cbus 0 0 83>;
+		};
+
+		eth_rgmii_pins: eth-rgmii {
+			mux {
+				groups = "eth_tx_clk",
+					 "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd0_0",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc",
+					 "eth_ref_clk",
+					 "eth_txd2",
+					 "eth_txd3",
+					 "eth_rxd3",
+					 "eth_rxd2";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		eth_rmii_pins: eth-rmii {
+			mux {
+				groups = "eth_tx_en",
+					 "eth_txd1_0",
+					 "eth_txd0_0",
+					 "eth_rx_clk",
+					 "eth_rx_dv",
+					 "eth_rxd1",
+					 "eth_rxd0",
+					 "eth_mdio_en",
+					 "eth_mdc";
+				function = "ethernet";
+				bias-disable;
+			};
+		};
+
+		i2c_a_pins: i2c-a {
+			mux {
+				groups = "i2c_sda_a", "i2c_sck_a";
+				function = "i2c_a";
+				bias-disable;
+			};
+		};
+
+		sd_b_pins: sd-b {
+			mux {
+				groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
+					"sd_d3_b", "sd_clk_b", "sd_cmd_b";
+				function = "sd_b";
+				bias-disable;
+			};
+		};
+
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					 "sdxc_d47_c", "sdxc_clk_c",
+					 "sdxc_cmd_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
+		pwm_c1_pins: pwm-c1 {
+			mux {
+				groups = "pwm_c1";
+				function = "pwm_c";
+				bias-disable;
+			};
+		};
+
+		pwm_d_pins: pwm-d {
+			mux {
+				groups = "pwm_d";
+				function = "pwm_d";
+				bias-disable;
+			};
+		};
+
+		uart_b0_pins: uart-b0 {
+			mux {
+				groups = "uart_tx_b0",
+				       "uart_rx_b0";
+				function = "uart_b";
+				bias-pull-up;
+			};
+		};
+
+		uart_b0_cts_rts_pins: uart-b0-cts-rts {
+			mux {
+				groups = "uart_cts_b0",
+				       "uart_rts_b0";
+				function = "uart_b";
+				bias-disable;
+			};
+		};
+	};
+};
+
+&ahb_sram {
+	ao_arc_sram: aoarc-sram@0 {
+		compatible = "amlogic,meson8b-ao-arc-sram";
+		reg = <0x0 0x8000>;
+		pool;
+	};
+
+	smp-sram@1ff80 {
+		compatible = "amlogic,meson8b-smp-sram";
+		reg = <0x1ff80 0x8>;
+	};
+};
+
+
+&efuse {
+	compatible = "amlogic,meson8b-efuse";
+	clocks = <&clkc CLKID_EFUSE>;
+	clock-names = "core";
+
+	temperature_calib: calib@1f4 {
+		/* only the upper two bytes are relevant */
+		reg = <0x1f4 0x4>;
+	};
+};
+
+&ethmac {
+	compatible = "amlogic,meson8b-dwmac", "snps,dwmac-3.70a", "snps,dwmac";
+
+	reg = <0xc9410000 0x10000
+	       0xc1108140 0x4>;
+
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+	rx-fifo-depth = <4096>;
+	tx-fifo-depth = <2048>;
+
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
+};
+
+&gpio_intc {
+	compatible = "amlogic,meson8b-gpio-intc",
+		     "amlogic,meson-gpio-intc";
+	status = "okay";
+};
+
+&hhi {
+	clkc: clock-controller {
+		compatible = "amlogic,meson8b-clkc";
+		clocks = <&xtal>, <&ddr_clkc DDR_CLKID_DDR_PLL>;
+		clock-names = "xtal", "ddr_pll";
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8b-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		resets = <&reset RESET_DBLK>,
+			 <&reset RESET_PIC_DC>,
+			 <&reset RESET_HDMI_APB>,
+			 <&reset RESET_HDMI_SYSTEM_RESET>,
+			 <&reset RESET_VENCI>,
+			 <&reset RESET_VENCP>,
+			 <&reset RESET_VDAC_4>,
+			 <&reset RESET_VENCL>,
+			 <&reset RESET_VIU>,
+			 <&reset RESET_VENC>,
+			 <&reset RESET_RDMA>;
+		reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system",
+			      "venci", "vencp", "vdac", "vencl", "viu",
+			      "venc", "rdma";
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <182142857>;
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_CLK81>;
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&L2 {
+	arm,data-latency = <3 3 3>;
+	arm,tag-latency = <2 2 2>;
+	arm,filter-ranges = <0x100000 0xc0000000>;
+	prefetch-data = <1>;
+	prefetch-instr = <1>;
+	arm,prefetch-offset = <7>;
+	arm,double-linefill = <1>;
+	arm,prefetch-drop = <1>;
+	arm,shared-override;
+};
+
+&periph {
+	scu@0 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x0 0x100>;
+	};
+
+	timer@200 {
+		compatible = "arm,cortex-a5-global-timer";
+		reg = <0x200 0x20>;
+		interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+
+		/*
+		 * the arm_global_timer driver currently does not handle clock
+		 * rate changes. Keep it disabled for now.
+		 */
+		status = "disabled";
+	};
+
+	timer@600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x600 0x20>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+		clocks = <&clkc CLKID_PERIPH>;
+	};
+};
+
+&pwm_ab {
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&pwm_cd {
+	compatible = "amlogic,meson8b-pwm-v2", "amlogic,meson8-pwm-v2";
+	clocks = <&xtal>,
+		 <0>, /* unknown/untested, the datasheet calls it "Video PLL" */
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>;
+};
+
+&rtc {
+	compatible = "amlogic,meson8b-rtc";
+	resets = <&reset RESET_RTC>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>, <&clkc CLKID_SAR_ADC>;
+	clock-names = "clkin", "core";
+	amlogic,hhi-sysctrl = <&hhi>;
+	nvmem-cells = <&temperature_calib>;
+	nvmem-cell-names = "temperature_calib";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
+&secbus {
+	secbus2: system-controller@4000 {
+		compatible = "amlogic,meson8b-secbus2", "syscon";
+		reg = <0x4000 0x2000>;
+	};
+};
+
+&sdio {
+	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
+&timer_abcde {
+	clocks = <&xtal>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
+&uart_AO {
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_A {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_B {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&uart_C {
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
+};
+
+&usb0 {
+	compatible = "amlogic,meson8b-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb1 {
+	compatible = "amlogic,meson8b-usb", "snps,dwc2";
+	clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
+	clock-names = "otg";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8b-usb2-phy", "amlogic,meson-mx-usb2-phy";
+	clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
+	clock-names = "usb_general", "usb";
+	resets = <&reset RESET_USB_OTG>;
+};
+
+&wdt {
+	compatible = "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
index d54477b1001c..08aa661e17ad 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/amlogic/meson8m2-mxiii-plus.dts
@@ -19,7 +19,6 @@
 		ethernet0 = &ethmac;
 		i2c0 = &i2c_AO;
 		serial0 = &uart_AO;
-		serial1 = &uart_A;
 		mmc0 = &sd_card_slot;
 	};
 
@@ -27,7 +26,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
@@ -45,9 +44,17 @@
 		};
 	};
 
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&saradc 8>;
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		pinctrl-0 = <&xtal_32k_out_pins>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>,
+			      <&gpio_ao GPIOAO_6 GPIO_ACTIVE_LOW>;
+
+		clocks = <&xtal_32k_out>;
+		clock-names = "ext_clock";
 	};
 
 	vcc_3v3: regulator-vcc3v3 {
@@ -56,6 +63,13 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	xtal_32k_out: xtal-32k-out-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k_out";
+	};
 };
 
 &cpu0 {
@@ -69,9 +83,7 @@
 	pinctrl-names = "default";
 
 	phy-handle = <&eth_phy0>;
-	phy-mode = "rgmii";
-
-	amlogic,tx-delay-ns = <4>;
+	phy-mode = "rgmii-id";
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
@@ -83,7 +95,7 @@
 			reg = <0>;
 
 			reset-assert-us = <10000>;
-			reset-deassert-us = <30000>;
+			reset-deassert-us = <80000>;
 			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
 		};
 	};
@@ -199,6 +211,27 @@
 	vref-supply = <&vddio_ao1v8>;
 };
 
+/* SDIO wifi */
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_a_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	max-frequency = <50000000>;
+
+	disable-wp;
+	non-removable;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
 &sdio {
 	status = "okay";
 
@@ -229,6 +262,12 @@
 	pinctrl-0 = <&uart_a1_pins>, <&uart_a1_cts_rts_pins>;
 	pinctrl-names = "default";
 	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm20702a1";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+	};
 };
 
 &uart_AO {
diff --git a/arch/arm/boot/dts/amlogic/meson8m2.dtsi b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
new file mode 100644
index 000000000000..6725dd9fd825
--- /dev/null
+++ b/arch/arm/boot/dts/amlogic/meson8m2.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+#include "meson8.dtsi"
+
+/ {
+	model = "Amlogic Meson8m2 SoC";
+	compatible = "amlogic,meson8m2";
+}; /* end of / */
+
+&clkc {
+	compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc";
+};
+
+&dmcbus {
+	/* the offset of the canvas registers has changed compared to Meson8 */
+	/delete-node/ video-lut@20;
+
+	canvas: video-lut@48 {
+		compatible = "amlogic,meson8m2-canvas", "amlogic,canvas";
+		reg = <0x48 0x14>;
+	};
+};
+
+&ethmac {
+	compatible = "amlogic,meson8m2-dwmac", "snps,dwmac";
+	reg = <0xc9410000 0x10000
+		0xc1108140 0x8>;
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
+	resets = <&reset RESET_ETHERNET>;
+	reset-names = "stmmaceth";
+};
+
+&pinctrl_aobus {
+	compatible = "amlogic,meson8m2-aobus-pinctrl",
+		     "amlogic,meson8-aobus-pinctrl";
+};
+
+&pinctrl_cbus {
+	compatible = "amlogic,meson8m2-cbus-pinctrl",
+		     "amlogic,meson8-cbus-pinctrl";
+
+	eth_rgmii_pins: ethernet {
+		mux {
+			groups = "eth_tx_clk_50m", "eth_tx_en",
+				 "eth_txd3", "eth_txd2",
+				 "eth_txd1", "eth_txd0",
+				 "eth_rx_clk_in", "eth_rx_dv",
+				 "eth_rxd3", "eth_rxd2",
+				 "eth_rxd1", "eth_rxd0",
+				 "eth_mdio", "eth_mdc";
+			function = "ethernet";
+			bias-disable;
+		};
+	};
+};
+
+&pwrc {
+	compatible = "amlogic,meson8m2-pwrc";
+	resets = <&reset RESET_DBLK>,
+		 <&reset RESET_PIC_DC>,
+		 <&reset RESET_HDMI_APB>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC_4>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_RDMA>;
+	reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system", "venci",
+		      "vencp", "vdac", "vencl", "viu", "venc", "rdma";
+	assigned-clocks = <&clkc CLKID_VPU>;
+	assigned-clock-rates = <364000000>;
+};
+
+&saradc {
+	compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
+};
+
+&sdhc {
+	compatible = "amlogic,meson8m2-sdhc", "amlogic,meson-mx-sdhc";
+};
+
+&usb0_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
+&wdt {
+	compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt";
+};
diff --git a/arch/arm/boot/dts/arm/Makefile b/arch/arm/boot/dts/arm/Makefile
new file mode 100644
index 000000000000..07ebb64e2cd0
--- /dev/null
+++ b/arch/arm/boot/dts/arm/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_INTEGRATOR) += \
+	integratorap.dtb \
+	integratorap-im-pd1.dtb \
+	integratorcp.dtb
+dtb-$(CONFIG_ARCH_MPS2) += \
+	mps2-an385.dtb \
+	mps2-an399.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += \
+	arm-realview-pb1176.dtb \
+	arm-realview-pb11mp.dtb \
+	arm-realview-eb.dtb \
+	arm-realview-eb-bbrevd.dtb \
+	arm-realview-eb-11mp.dtb \
+	arm-realview-eb-11mp-bbrevd.dtb \
+	arm-realview-eb-11mp-ctrevb.dtb \
+	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
+	arm-realview-eb-a9mp.dtb \
+	arm-realview-eb-a9mp-bbrevd.dtb \
+	arm-realview-pba8.dtb \
+	arm-realview-pbx-a9.dtb
+dtb-$(CONFIG_ARCH_VERSATILE) += \
+	versatile-ab.dtb \
+	versatile-ab-ib2.dtb \
+	versatile-pb.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += \
+	vexpress-v2p-ca5s.dtb \
+	vexpress-v2p-ca9.dtb \
+	vexpress-v2p-ca15-tc1.dtb \
+	vexpress-v2p-ca15_a7.dtb
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
index e18769df9fd9..e18769df9fd9 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd-ctrevb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
index 26b1c69e9f43..26b1c69e9f43 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
index e68527b0d552..e68527b0d552 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp-ctrevb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
index aac1edd4b227..aac1edd4b227 100644
--- a/arch/arm/boot/dts/arm-realview-eb-11mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-11mp.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
index 42efac7496ef..42efac7496ef 100644
--- a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
index 967684b3636c..967684b3636c 100644
--- a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-a9mp.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
index f533c8b49d97..f533c8b49d97 100644
--- a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
index a79e1d1d30a7..7f62aef9ca8a 100644
--- a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi
@@ -22,7 +22,7 @@
 
 / {
 	/* Introduce a fixed regulator for the new ethernet controller */
-	veth: fixedregulator@0 {
+	veth: regulator-veth {
 		compatible = "regulator-fixed";
 		regulator-name = "veth";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
index 29b636fce23f..40f7515aa068 100644
--- a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb-mp.dtsi
@@ -59,7 +59,7 @@
 			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,l220-cache";
 			reg = <0x1f002000 0x1000>;
 			interrupt-parent = <&intc>;
@@ -103,7 +103,7 @@
 		};
 
 		/* PMU with one IRQ line per core */
-		pmu: pmu@0 {
+		pmu: pmu {
 			compatible = "arm,arm11mpcore-pmu";
 			interrupt-parent = <&intc>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/arm-realview-eb.dts b/arch/arm/boot/dts/arm/arm-realview-eb.dts
index 15431077f00c..15431077f00c 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dts
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
index fe0207b88053..16f784da5a55 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
@@ -45,7 +45,7 @@
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -53,13 +53,13 @@
 		regulator-boot-on;
         };
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -67,48 +67,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -148,7 +108,7 @@
 	usb: usb@4f000000 {
 		compatible = "nxp,usb-isp1761";
 		reg = <0x4f000000 0x20000>;
-		port1-otg;
+		dr_mode = "peripheral";
 	};
 
 	bridge {
@@ -198,96 +158,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -383,14 +359,14 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog: watchdog@10010000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x10010000 0x1000>;
 			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
index 2625ce66f8e7..b9b10cbd65aa 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
@@ -63,13 +63,13 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -77,40 +77,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -166,7 +134,7 @@
 		reg = <0x3b000000 0x20000>;
 		interrupt-parent = <&intc_fpga1176>;
 		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
-		port1-otg;
+		dr_mode = "peripheral";
 	};
 
 	bridge {
@@ -216,96 +184,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -323,7 +307,7 @@
 			      <0x10120000 0x100>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,l220-cache";
 			reg = <0x10110000 0x1000>;
 			interrupt-parent = <&intc_dc1176>;
@@ -394,7 +378,7 @@
 			interrupt-parent = <&intc_dc1176>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		pb1176_serial0: serial@1010c000 {
@@ -435,7 +419,7 @@
 
 		/* Direct-mapped development chip ROM */
 		pb1176_rom@10200000 {
-			compatible = "direct-mapped";
+			compatible = "mtd-rom";
 			reg = <0x10200000 0x4000>;
 			bank-width = <1>;
 		};
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
index c69cf7ddbe61..db1b6793cd2c 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
@@ -92,7 +92,7 @@
 		      <0x1f000100 0x100>;
 	};
 
-	L2: l2-cache {
+	L2: cache-controller@1f002000 {
 		compatible = "arm,l220-cache";
 		reg = <0x1f002000 0x1000>;
 		interrupt-parent = <&intc_tc11mp>;
@@ -163,19 +163,19 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -183,48 +183,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -303,114 +263,132 @@
 		pb11mp_syscon: syscon@10000000 {
 			compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				linux,default-trigger = "cpu1";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				linux,default-trigger = "cpu2";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				linux,default-trigger = "cpu3";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
 
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk5: osc5@d4 {
+			oscclk5: clock-controller@d4 {
 				compatible = "arm,syscon-icst307";
+				reg = <0xd4 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0xd4>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk6: osc6@d8 {
+			oscclk6: clock-controller@d8 {
 				compatible = "arm,syscon-icst307";
+				reg = <0xd8 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0xd8>;
@@ -537,7 +515,7 @@
 			interrupt-parent = <&intc_pb11mp>;
 			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		watchdog@1000f000 {
@@ -546,7 +524,7 @@
 			interrupt-parent = <&intc_pb11mp>;
 			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -556,7 +534,7 @@
 			interrupt-parent = <&intc_pb11mp>;
 			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		timer01: timer@10011000 {
@@ -568,8 +546,8 @@
 			clocks = <&sp810_syscon 0>,
 			         <&sp810_syscon 1>,
 				 <&pclk>;
-			clock-names = "timerclk0",
-				    "timerclk1",
+			clock-names = "timer0clk",
+				    "timer1clk",
 				    "apb_pclk";
 		};
 
@@ -582,8 +560,8 @@
 			clocks = <&sp810_syscon 2>,
 			         <&sp810_syscon 3>,
 				 <&pclk>;
-			clock-names = "timerclk2",
-				    "timerclk3",
+			clock-names = "timer0clk",
+				    "timer1clk",
 				    "apb_pclk";
 		};
 
@@ -645,16 +623,16 @@
 		timer45: timer@10018000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x10018000 0x1000>;
-			clocks = <&timclk>, <&pclk>;
-			clock-names = "timer", "apb_pclk";
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
 		timer67: timer@10019000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x10019000 0x1000>;
-			clocks = <&timclk>, <&pclk>;
-			clock-names = "timer", "apb_pclk";
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -712,7 +690,7 @@
 			reg = <0x4f000000 0x20000>;
 			interrupt-parent = <&intc_tc11mp>;
 			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
-			port1-otg;
+			dr_mode = "peripheral";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
index d3238c252b59..d2e0082245f9 100644
--- a/arch/arm/boot/dts/arm-realview-pba8.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pba8.dts
@@ -40,7 +40,7 @@
 		};
 	};
 
-	pmu: pmu@0 {
+	pmu: pmu {
 		compatible = "arm,cortex-a8-pmu";
 		interrupt-parent = <&intc>;
 		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
index 90d00b407f85..507ad7ac4974 100644
--- a/arch/arm/boot/dts/arm-realview-pbx-a9.dts
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx-a9.dts
@@ -60,7 +60,7 @@
 		};
 	};
 
-	L2: l2-cache {
+	L2: cache-controller {
 		compatible = "arm,pl310-cache";
 		reg = <0x1f002000 0x1000>;
 		cache-unified;
@@ -97,7 +97,7 @@
 		interrupts = <1 14 0xf04>;
 	};
 
-	pmu: pmu@0 {
+	pmu: pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupt-parent = <&intc>;
 		interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
index 09f3f544f3a7..e625403a9456 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
@@ -62,19 +62,19 @@
 		regulator-boot-on;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	refclk32khz: refclk32khz {
+	refclk32khz: clock-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
-	timclk: timclk@1M {
+	timclk: clock-1000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <24>;
@@ -82,48 +82,8 @@
 		clocks = <&xtal24mhz>;
 	};
 
-	mclk: mclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	kmiclk: kmiclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	sspclk: sspclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	uartclk: uartclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
-	wdogclk: wdogclk@24M {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* FIXME: this actually hangs off the PLL clocks */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -164,7 +124,7 @@
 	usb: usb@4f000000 {
 		compatible = "nxp,usb-isp1761";
 		reg = <0x4f000000 0x20000>;
-		port1-otg;
+		dr_mode = "peripheral";
 	};
 
 	bridge {
@@ -210,7 +170,7 @@
 		};
 	};
 
-	soc: soc@0 {
+	soc: soc {
 		compatible = "arm,realview-pbx-soc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -220,96 +180,112 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
-			oscclk0: osc0@0c {
+			oscclk0: clock-controller@c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x0C>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk1: osc1@10 {
+			oscclk1: clock-controller@10 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x10>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk2: osc2@14 {
+			oscclk2: clock-controller@14 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x14>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk3: osc3@18 {
+			oscclk3: clock-controller@18 {
 				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x18>;
 				clocks = <&xtal24mhz>;
 			};
-			oscclk4: osc4@1c {
+			oscclk4: clock-controller@1c {
 				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
 				#clock-cells = <0>;
 				lock-offset = <0x20>;
 				vco-offset = <0x1c>;
@@ -374,14 +350,14 @@
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1000d000 0x1000>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		wdog0: watchdog@1000f000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x1000f000 0x1000>;
 			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -389,7 +365,7 @@
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x10010000 0x1000>;
 			clocks = <&wdogclk>, <&pclk>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/arm/integrator.dtsi
index 602f74d2c758..7f1c8ee9dd8a 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/arm/integrator.dtsi
@@ -15,10 +15,14 @@
 	core-module@10000000 {
 		compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
 		/* Use core module LED to indicate CPU load */
-		led@c.0 {
+		led@c,0 {
 			compatible = "register-bit-led";
+			reg = <0x0c 0x04>;
 			offset = <0x0c>;
 			mask = <0x01>;
 			label = "integrator:core_module";
@@ -84,12 +88,12 @@
 			interrupts = <8>;
 		};
 
-		uart@16000000 {
+		serial@16000000 {
 			reg = <0x16000000 0x1000>;
 			interrupts = <1>;
 		};
 
-		uart@17000000 {
+		serial@17000000 {
 			reg = <0x17000000 0x1000>;
 			interrupts = <2>;
 		};
@@ -104,35 +108,42 @@
 			interrupts = <4>;
 		};
 
-		syscon {
+		syscon@1a000000 {
 			/* Debug registers mapped as syscon */
 			compatible = "syscon", "simple-mfd";
 			reg = <0x1a000000 0x10>;
+			ranges = <0x0 0x1a000000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@4.0 {
+			led@4,0 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x01>;
 				label = "integrator:green0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@4.1 {
+			led@4,1 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x02>;
 				label = "integrator:yellow";
 				default-state = "off";
 			};
-			led@4.2 {
+			led@4,2 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x04>;
 				label = "integrator:red";
 				default-state = "off";
 			};
-			led@4.3 {
+			led@4,3 {
 				compatible = "register-bit-led";
+				reg = <0x04 0x04>;
 				offset = <0x04>;
 				mask = <0x08>;
 				label = "integrator:green1";
diff --git a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
new file mode 100644
index 000000000000..db13e09f2fab
--- /dev/null
+++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ * with the IM-PD1 example logical module mounted.
+ */
+
+#include "integratorap.dts"
+
+/ {
+	model = "ARM Integrator/AP with IM-PD1";
+	compatible = "arm,integrator-ap";
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		impd1_ram: vram@c2000000 {
+			/* 1 MB of designated video RAM on the IM-PD1 */
+			compatible = "shared-dma-pool";
+			reg = <0xc2000000 0x00100000>;
+			no-map;
+		};
+	};
+};
+
+&lm0 {
+	syscon@0 {
+		compatible = "arm,im-pd1-syscon", "syscon";
+		reg = <0x00000000 0x1000>;
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		vco1: clock-controller@0 {
+			compatible = "arm,impd1-vco1";
+			reg = <0x00 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x00>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO1";
+		};
+
+		vco2: clock-controller@4 {
+			compatible = "arm,impd1-vco2";
+			reg = <0x04 0x04>;
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x04>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO2";
+		};
+	};
+
+	/* Also used for the Smart Card Interface SCI */
+	impd1_uartclk: clock-uart {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV4";
+	};
+
+	/* For the SSP the clock is divided by 64 */
+	impd1_sspclk: clock-ssp {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <64>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV64";
+	};
+
+	/* Fixed regulator for the MMC */
+	impd1_3v3: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Push buttons on the IM-PD1 */
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			debounce-interval = <50>;
+			linux,code = <KEY_UP>;
+			label = "UP";
+			gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+		button@1 {
+			debounce-interval = <50>;
+			linux,code = <KEY_DOWN>;
+			label = "DOWN";
+			gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			debounce-interval = <50>;
+			linux,code = <KEY_LEFT>;
+			label = "LEFT";
+			gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+		button@3 {
+			debounce-interval = <50>;
+			linux,code = <KEY_RIGHT>;
+			label = "UP";
+			gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+		button@4 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ESC>;
+			label = "ESC";
+			gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+		button@5 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ENTER>;
+			label = "ENTER";
+			gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+
+	bridge {
+		compatible = "ti,ths8134b", "ti,ths8134";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+					vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+		label = "J30";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	serial@100000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00100000 0x1000>;
+		interrupts-extended = <&impd1_vic 1>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	serial@200000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00200000 0x1000>;
+		interrupts-extended = <&impd1_vic 2>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	spi@300000 {
+		compatible = "arm,pl022", "arm,primecell";
+		reg = <0x00300000 0x1000>;
+		interrupts-extended = <&impd1_vic 3>;
+		clocks = <&impd1_sspclk>, <&sysclk>;
+		clock-names = "sspclk", "apb_pclk";
+	};
+
+	impd1_gpio0: gpio@400000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00400000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 4>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	impd1_gpio1: gpio@500000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00500000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 5>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	rtc@600000 {
+		compatible = "arm,pl030", "arm,primecell";
+		reg = <0x00600000 0x1000>;
+		interrupts-extended = <&impd1_vic 6>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	mmc@700000 {
+		compatible = "arm,pl181", "arm,primecell";
+		reg = <0x00700000 0x1000>;
+		interrupts-extended = <&impd1_vic 7>,
+				    <&impd1_vic 8>;
+		clocks = <&sysclk>, <&sysclk>;
+		clock-names = "mclk", "apb_pclk";
+		bus-width = <1>;
+		max-frequency = <515633>;
+		vmmc-supply = <&impd1_3v3>;
+		wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>;
+		cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>;
+	};
+
+	aaci@800000 {
+		compatible = "arm,pl041", "arm,primecell";
+		reg = <0x00800000 0x1000>;
+		interrupts-extended = <&impd1_vic 9>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	display@1000000 {
+		compatible = "arm,pl110", "arm,primecell";
+		reg = <0x01000000 0x1000>;
+		interrupts-extended = <&impd1_vic 11>;
+		clocks = <&vco1>, <&sysclk>;
+		clock-names = "clcdclk", "apb_pclk";
+		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+		max-memory-bandwidth = <40000000>;
+		memory-region = <&impd1_ram>;
+		dma-ranges;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clcd_pads_vga_dac: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vga_bridge_in>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+	};
+
+	impd1_vic: interrupt-controller@3000000 {
+		compatible = "arm,pl192-vic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x03000000 0x1000>;
+		/* Valid interrupts, 0-9 and 11 */
+		valid-mask = <0x00000bff>;
+		/* LM site 0 has IRQ 9 on the PIC */
+		interrupts-extended = <&pic 9>;
+	};
+};
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts
index 94d2ff9836d0..9b6a1dbaf265 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/arm/integratorap.dts
@@ -4,12 +4,13 @@
  */
 
 /dts-v1/;
-/include/ "integrator.dtsi"
+#include "integrator.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "ARM Integrator/AP";
 	compatible = "arm,integrator-ap";
-	dma-ranges = <0x80000000 0x0 0x80000000>;
 
 	cpus {
 		#address-cells = <1>;
@@ -56,22 +57,14 @@
 	};
 
 	/* 24 MHz chrystal on the Integrator/AP development board */
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: pclk: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
 	};
 
-	pclk: pclk@0 {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clock-div = <1>;
-		clock-mult = <1>;
-		clocks = <&xtal24mhz>;
-	};
-
 	/* The UART clock is 14.74 MHz divided by an ICS525 */
-	uartclk: uartclk@14.74M {
+	uartclk: clock-14745600 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
@@ -80,15 +73,16 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
+		cm24mhz: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 		};
 
 		/* Oscillator on the core module, clocks the CPU core */
-		cmosc: cmosc@24M {
+		cmosc: clock-controller@8 {
 			compatible = "arm,syscon-icst525-integratorap-cm";
+			reg = <0x08 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x08>;
@@ -96,8 +90,9 @@
 		};
 
 		/* Auxilary oscillator on the core module, 32.369MHz at boot */
-		auxosc: auxosc@24M {
+		auxosc: clock-controller@1c {
 			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x1c>;
@@ -108,16 +103,17 @@
 	syscon {
 		compatible = "arm,integrator-ap-syscon", "syscon";
 		reg = <0x11000000 0x100>;
-		interrupt-parent = <&pic>;
-		/* These are the logical module IRQs */
-		interrupts = <9>, <10>, <11>, <12>;
+		ranges = <0x0 0x11000000 0x100>;
+		#size-cells = <1>;
+		#address-cells = <1>;
 
 		/*
 		 * SYSCLK clocks PCIv3 bridge, system controller and the
 		 * logic modules.
 		 */
-		sysclk: apsys@24M {
+		sysclk: clock-controller@4 {
 			compatible = "arm,syscon-icst525-integratorap-sys";
+			reg = <0x04 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x1c>;
 			vco-offset = <0x04>;
@@ -125,8 +121,9 @@
 		};
 
 		/* One-bit control for the PCI bus clock (33 or 25 MHz) */
-		pciclk: pciclk@24M {
+		pciclk: clock-controller@4,8 {
 			compatible = "arm,syscon-icst525-integratorap-pci";
+			reg = <0x04 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x1c>;
 			vco-offset = <0x04>;
@@ -153,8 +150,9 @@
 		valid-mask = <0x003fffff>;
 	};
 
-	pci: pciv3@62000000 {
+	pci: pci@62000000 {
 		compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+		device_type = "pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
@@ -212,14 +210,14 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart0: uart@16000000 {
+		uart0: serial@16000000 {
 			compatible = "arm,pl010", "arm,primecell";
 			arm,primecell-periphid = <0x00041010>;
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart1: uart@17000000 {
+		uart1: serial@17000000 {
 			compatible = "arm,pl010", "arm,primecell";
 			arm,primecell-periphid = <0x00041010>;
 			clocks = <&uartclk>, <&pclk>;
@@ -240,4 +238,50 @@
 			clock-names = "KMIREFCLK", "apb_pclk";
 		};
 	};
+
+	/*
+	 * Logic module bus, we support up to 4 logical modules
+	 * They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000
+	 * and use interrupts 9, 10, 11 and 12 respectively.
+	 */
+	bus@c0000000 {
+		compatible = "arm,integrator-ap-lm";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0xc0000000 0xc0000000 0x40000000>;
+		dma-ranges;
+
+		lm0: bus@c0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xc0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xc0000000 0x10000000>;
+			reg = <0xc0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm1: bus@d0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xd0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xd0000000 0x10000000>;
+			reg = <0xd0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm2: bus@e0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xe0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xe0000000 0x10000000>;
+			reg = <0xe0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm3: bus@f0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xf0000000 0x10000000>;
+			dma-ranges = <0x00000000 0xf0000000 0x10000000>;
+			reg = <0xf0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/arm/integratorcp.dts
index 01fa229e1bd0..8ad1a8957ace 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/arm/integratorcp.dts
@@ -47,14 +47,14 @@
 	 */
 
 	/* The codec chrystal operates at 24.576 MHz */
-	xtal_codec: xtal24.576@24.576M {
+	xtal_codec: clock-24576000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24576000>;
 	};
 
 	/* The chrystal is divided by 2 by the codec for the AACI bit clock */
-	aaci_bitclk: aaci_bitclk@12.288M {
+	aaci_bitclk: clock-12288000 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
 		clock-div = <2>;
@@ -63,21 +63,21 @@
 	};
 
 	/* This is a 25MHz chrystal on the base board */
-	xtal25mhz: xtal25mhz@25M {
+	xtal25mhz: clock-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <25000000>;
 	};
 
 	/* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
-	uartclk: uartclk@14.74M {
+	uartclk: clock-14745600 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <14745600>;
 	};
 
 	/* Actually sysclk I think */
-	pclk: pclk@0 {
+	pclk: clock-pclk {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <0>;
@@ -85,15 +85,16 @@
 
 	core-module@10000000 {
 		/* 24 MHz chrystal on the core module */
-		cm24mhz: cm24mhz@24M {
+		cm24mhz: clock-24000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 		};
 
 		/* Oscillator on the core module, clocks the CPU core */
-		cmcore: cmosc@24M {
+		cmcore: clock-controller@8 {
 			compatible = "arm,syscon-icst525-integratorcp-cm-core";
+			reg = <0x08 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x08>;
@@ -101,8 +102,9 @@
 		};
 
 		/* Oscillator on the core module, clocks the memory bus */
-		cmmem: cmosc@24M {
+		cmmem: clock-controller@8,12 {
 			compatible = "arm,syscon-icst525-integratorcp-cm-mem";
+			reg = <0x08 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x08>;
@@ -110,8 +112,9 @@
 		};
 
 		/* Auxilary oscillator on the core module, clocks the CLCD */
-		auxosc: auxosc@24M {
+		auxosc: clock-controller@1c {
 			compatible = "arm,syscon-icst525";
+			reg = <0x1c 0x04>;
 			#clock-cells = <0>;
 			lock-offset = <0x14>;
 			vco-offset = <0x1c>;
@@ -128,7 +131,7 @@
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
+		timclk: clock-1000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
@@ -241,13 +244,13 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart@16000000 {
+		serial@16000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart@17000000 {
+		serial@17000000 {
 			compatible = "arm,pl011", "arm,primecell";
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
diff --git a/arch/arm/boot/dts/mps2-an385.dts b/arch/arm/boot/dts/arm/mps2-an385.dts
index aebbebfc25d1..aebbebfc25d1 100644
--- a/arch/arm/boot/dts/mps2-an385.dts
+++ b/arch/arm/boot/dts/arm/mps2-an385.dts
diff --git a/arch/arm/boot/dts/mps2-an399.dts b/arch/arm/boot/dts/arm/mps2-an399.dts
index 349abf70b2a5..349abf70b2a5 100644
--- a/arch/arm/boot/dts/mps2-an399.dts
+++ b/arch/arm/boot/dts/arm/mps2-an399.dts
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/arm/mps2.dtsi
index 96fb5a5cf4d3..e240bc8aa605 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/arm/mps2.dtsi
@@ -42,43 +42,43 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armv7-m.dtsi"
+#include "../armv7-m.dtsi"
 
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	oscclk0: clk-osc0 {
+	oscclk0: clock-50000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <50000000>;
 	};
 
-	oscclk1: clk-osc1 {
+	oscclk1: clock-24576000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <24576000>;
 	};
 
-	oscclk2: clk-osc2 {
+	oscclk2: clock-25000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	cfgclk: clk-cfg {
+	cfgclk: clock-5000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <5000000>;
 	};
 
-	spicfgclk: clk-spicfg {
+	spicfgclk: clock-75000000 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <75000000>;
 	};
 
-	sysclk: clk-sys {
+	sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk0>;
 		#clock-cells = <0>;
@@ -86,7 +86,7 @@
 		clock-mult = <1>;
 	};
 
-	audmclk: clk-audm {
+	audmclk: clk-12388000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;
@@ -94,7 +94,7 @@
 		clock-mult = <1>;
 	};
 
-	audsclk: clk-auds {
+	audsclk: clk-3072000 {
 		compatible = "fixed-factor-clock";
 		clocks = <&oscclk1>;
 		#clock-cells = <0>;
@@ -102,38 +102,6 @@
 		clock-mult = <1>;
 	};
 
-	spiclcd: clk-cpiclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	spicon: clk-spicon {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2cclcd: clk-i2cclcd {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
-	i2caud: clk-i2caud {
-		compatible = "fixed-factor-clock";
-		clocks = <&oscclk0>;
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-	};
-
 	soc {
 		compatible = "simple-bus";
 		ranges;
@@ -161,9 +129,11 @@
 			};
 
 			timer2: dual-timer@2000 {
-				compatible = "arm,sp804";
+				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x2000 0x1000>;
-				clocks = <&sysclk>;
+				clocks = <&sysclk>, <&sysclk>, <&sysclk>;
+				clock-names = "timer0clk", "timer1clk",
+					       "apb_pclk";
 				interrupts = <10>;
 				status = "disabled";
 			};
@@ -197,8 +167,8 @@
 				arm,primecell-periphid = <0x00141805>;
 				reg = <0x8000 0x1000>;
 				interrupts = <0>;
-				clocks = <&sysclk>;
-				clock-names = "apb_pclk";
+				clocks = <&sysclk>, <&sysclk>;
+				clock-names = "wdog_clk", "apb_pclk";
 				status = "disabled";
 			};
 		};
@@ -214,8 +184,13 @@
 			compatible = "syscon", "simple-mfd";
 			reg = <0x8000 0x10>;
 
-			led0 {
+			ranges = <0x0 0x8000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@0,0 {
 				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
 				offset = <0x0>;
 				mask = <0x01>;
 				label = "userled:0";
@@ -223,8 +198,9 @@
 				default-state = "on";
 			};
 
-			led1 {
+			led@0,1 {
 				compatible = "register-bit-led";
+				reg = <0x00 0x04>;
 				offset = <0x0>;
 				mask = <0x02>;
 				label = "userled:1";
diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
index 5890cb974f78..7ebb0dfd0467 100644
--- a/arch/arm/boot/dts/versatile-ab-ib2.dts
+++ b/arch/arm/boot/dts/arm/versatile-ab-ib2.dts
@@ -10,12 +10,16 @@
 	model = "ARM Versatile AB + IB2 board";
 
 	/* Special IB2 control register */
-	ib2_syscon@27000000 {
+	syscon@27000000 {
 		compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
 		reg = <0x27000000 0x4>;
+		ranges = <0x0 0x27000000 0x4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		led@00.4 {
+		led@0,4 {
 			compatible = "register-bit-led";
+			reg = <0x00 0x04>;
 			offset = <0x00>;
 			mask = <0x10>;
 			label = "versatile-ib2:0";
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/arm/versatile-ab.dts
index 37bd41ff8dff..635ab9268899 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/arm/versatile-ab.dts
@@ -24,7 +24,7 @@
 		reg = <0x0 0x08000000>;
 	};
 
-	xtal24mhz: xtal24mhz@24M {
+	xtal24mhz: clock-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;
@@ -32,8 +32,6 @@
 
 	bridge {
 		compatible = "ti,ths8134b", "ti,ths8134";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -59,6 +57,7 @@
 
 	vga {
 		compatible = "vga-connector";
+		label = "J1";
 
 		port {
 			vga_con_in: endpoint {
@@ -70,61 +69,72 @@
 	core-module@10000000 {
 		compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
 		reg = <0x10000000 0x200>;
+		ranges = <0x0 0x10000000 0x200>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		led@08.0 {
+		led@8,0 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x01>;
 			label = "versatile:0";
 			linux,default-trigger = "heartbeat";
 			default-state = "on";
 		};
-		led@08.1 {
+		led@8,1 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x02>;
 			label = "versatile:1";
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
-		led@08.2 {
+		led@8,2 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x04>;
 			label = "versatile:2";
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
-		led@08.3 {
+		led@8,3 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x08>;
 			label = "versatile:3";
 			default-state = "off";
 		};
-		led@08.4 {
+		led@8,4 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x10>;
 			label = "versatile:4";
 			default-state = "off";
 		};
-		led@08.5 {
+		led@8,5 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x20>;
 			label = "versatile:5";
 			default-state = "off";
 		};
-		led@08.6 {
+		led@8,6 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x40>;
 			label = "versatile:6";
 			default-state = "off";
 		};
-		led@08.7 {
+		led@8,7 {
 			compatible = "register-bit-led";
+			reg = <0x08 0x04>;
 			offset = <0x08>;
 			mask = <0x80>;
 			label = "versatile:7";
@@ -132,14 +142,14 @@
 		};
 
 		/* OSC1 on AB, OSC4 on PB */
-		osc1: cm_aux_osc@24M {
+		osc1: clock-osc {
 			#clock-cells = <0>;
 			compatible = "arm,versatile-cm-auxosc";
 			clocks = <&xtal24mhz>;
 		};
 
 		/* The timer clock is the 24 MHz oscillator divided to 1MHz */
-		timclk: timclk@1M {
+		timclk: clock-1000000 {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <24>;
@@ -147,7 +157,7 @@
 			clocks = <&xtal24mhz>;
 		};
 
-		pclk: pclk@24M {
+		pclk: clock-pclk {
 			#clock-cells = <0>;
 			compatible = "fixed-factor-clock";
 			clock-div = <1>;
@@ -195,16 +205,15 @@
 		#size-cells = <1>;
 		ranges;
 
-		vic: intc@10140000 {
+		vic: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x1000>;
-			clear-mask = <0xffffffff>;
 			valid-mask = <0xffffffff>;
 		};
 
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			compatible = "arm,versatile-sic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -227,7 +236,7 @@
 			clock-names = "apb_pclk";
 		};
 
-		uart0: uart@101f1000 {
+		uart0: serial@101f1000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f1000 0x1000>;
 			interrupts = <12>;
@@ -235,7 +244,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart1: uart@101f2000 {
+		uart1: serial@101f2000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f2000 0x1000>;
 			interrupts = <13>;
@@ -243,7 +252,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart2: uart@101f3000 {
+		uart2: serial@101f3000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x101f3000 0x1000>;
 			interrupts = <14>;
@@ -381,7 +390,7 @@
 			reg = <0x101f4000 0x1000>;
 			interrupts = <11>;
 			clocks = <&xtal24mhz>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		fpga {
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/arm/versatile-pb.dts
index 06a0fdf24026..fc21ce54b33a 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/arm/versatile-pb.dts
@@ -7,7 +7,7 @@
 
 	amba {
 		/* The Versatile PB is using more SIC IRQ lines than the AB */
-		sic: intc@10003000 {
+		sic: interrupt-controller@10003000 {
 			clear-mask = <0xffffffff>;
 			/*
 			 * Valid interrupt lines mask according to
@@ -85,7 +85,7 @@
 				 */
 				interrupts-extended = <&sic 22 &sic 23>;
 			};
-			uart@9000 {
+			serial@9000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x9000 0x1000>;
 				interrupt-parent = <&sic>;
diff --git a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
new file mode 100644
index 000000000000..158b3923eae3
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi
@@ -0,0 +1,494 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * original variant (vexpress-v2m.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m.dtsi!
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	v2m_fixed_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2m_clk24mhz: clock-24000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: clock-1000000 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: clock-32768 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "v2m:green:user1";
+			gpios = <&v2m_led_gpios 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "v2m:green:user2";
+			gpios = <&v2m_led_gpios 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-3 {
+			label = "v2m:green:user3";
+			gpios = <&v2m_led_gpios 2 0>;
+			linux,default-trigger = "cpu0";
+		};
+
+		led-4 {
+			label = "v2m:green:user4";
+			gpios = <&v2m_led_gpios 3 0>;
+			linux,default-trigger = "cpu1";
+		};
+
+		led-5 {
+			label = "v2m:green:user5";
+			gpios = <&v2m_led_gpios 4 0>;
+			linux,default-trigger = "cpu2";
+		};
+
+		led-6 {
+			label = "v2m:green:user6";
+			gpios = <&v2m_led_gpios 5 0>;
+			linux,default-trigger = "cpu3";
+		};
+
+		led-7 {
+			label = "v2m:green:user7";
+			gpios = <&v2m_led_gpios 6 0>;
+			linux,default-trigger = "cpu4";
+		};
+
+		led-8 {
+			label = "v2m:green:user8";
+			gpios = <&v2m_led_gpios 7 0>;
+			linux,default-trigger = "cpu5";
+		};
+	};
+
+	bus@8000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@8000000 {
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0x08000000 0x04000000>,
+				 <1 0 0x14000000 0x04000000>,
+				 <2 0 0x18000000 0x04000000>,
+				 <3 0 0x1c000000 0x04000000>,
+				 <4 0 0x0c000000 0x04000000>,
+				 <5 0 0x10000000 0x04000000>;
+
+			nor_flash: flash@0 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <4 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@100000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <1 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@202000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <2 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@203000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <2 0x03000000 0x20000>;
+				interrupts = <16>;
+				dr_mode = "peripheral";
+			};
+
+			iofpga-bus@300000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 3 0 0x200000>;
+
+				v2m_sysreg: sysreg@10000 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x010000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x10000 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@20000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x020000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@30000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x030000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@40000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x040000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmc@50000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x050000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@60000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x060000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@70000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x070000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@90000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x090000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a0000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b0000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c0000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c0000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				watchdog@f0000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f0000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@110000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x110000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@120000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x120000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@160000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x160000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in: endpoint {
+									remote-endpoint = <&clcd_pads>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@170000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x170000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a0000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a0000 0x100
+					       0x1a0100 0xf00>;
+					reg-shift = <2>;
+				};
+
+				clcd@1f0000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f0000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads: endpoint {
+							remote-endpoint = <&dvi_bridge_in>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+
+				mcc {
+					compatible = "arm,vexpress,config-bus";
+					arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+					oscclk0 {
+						/* MCC static memory clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 0>;
+						freq-range = <25000000 60000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk0";
+					};
+
+					v2m_oscclk1: oscclk1 {
+						/* CLCD clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 1>;
+						freq-range = <23750000 65000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk1";
+					};
+
+					v2m_oscclk2: oscclk2 {
+						/* IO FPGA peripheral clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 2>;
+						freq-range = <24000000 24000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk2";
+					};
+
+					volt-vio {
+						/* Logic level voltage */
+						compatible = "arm,vexpress-volt";
+						arm,vexpress-sysreg,func = <2 0>;
+						regulator-name = "VIO";
+						regulator-always-on;
+						label = "VIO";
+					};
+
+					temp-mcc {
+						/* MCC internal operating temperature */
+						compatible = "arm,vexpress-temp";
+						arm,vexpress-sysreg,func = <4 0>;
+						label = "MCC";
+					};
+
+					reset {
+						compatible = "arm,vexpress-reset";
+						arm,vexpress-sysreg,func = <5 0>;
+					};
+
+					muxfpga {
+						compatible = "arm,vexpress-muxfpga";
+						arm,vexpress-sysreg,func = <7 0>;
+					};
+
+					shutdown {
+						compatible = "arm,vexpress-shutdown";
+						arm,vexpress-sysreg,func = <8 0>;
+					};
+
+					reboot {
+						compatible = "arm,vexpress-reboot";
+						arm,vexpress-sysreg,func = <9 0>;
+					};
+
+					dvimode {
+						compatible = "arm,vexpress-dvimode";
+						arm,vexpress-sysreg,func = <11 0>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
index 2e29d7790497..be03f2a8a57a 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi
@@ -17,18 +17,73 @@
  * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
  * CHANGES TO vexpress-v2m-rs1.dtsi!
  */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
-	smb@4000000 {
-		motherboard {
-			model = "V2M-P1";
+	bus@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x10000000>,
+			 <0x10000000 0x10000000 0x00020000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@40000000 {
 			arm,hbi = <0x190>;
 			arm,vexpress,site = <0>;
 			compatible = "arm,vexpress,v2m-p1", "simple-bus";
 			#address-cells = <2>; /* SMB chipselect number and offset */
 			#size-cells = <1>;
-			#interrupt-cells = <1>;
-			ranges;
+			ranges = <0 0 0x40000000 0x04000000>,
+				 <1 0 0x44000000 0x04000000>,
+				 <2 0 0x48000000 0x04000000>,
+				 <3 0 0x4c000000 0x04000000>,
+				 <7 0 0x10000000 0x00020000>;
 
 			flash@0,00000000 {
 				compatible = "arm,vexpress-flash", "cfi-flash";
@@ -62,7 +117,7 @@
 				compatible = "nxp,usb-isp1761";
 				reg = <3 0x03000000 0x20000>;
 				interrupts = <16>;
-				port1-otg;
+				dr_mode = "peripheral";
 			};
 
 			iofpga@7,00000000 {
@@ -161,7 +216,7 @@
 					clock-names = "KMIREFCLK", "apb_pclk";
 				};
 
-				v2m_serial0: uart@9000 {
+				v2m_serial0: serial@9000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x09000 0x1000>;
 					interrupts = <5>;
@@ -169,7 +224,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial1: uart@a000 {
+				v2m_serial1: serial@a000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0a000 0x1000>;
 					interrupts = <6>;
@@ -177,7 +232,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial2: uart@b000 {
+				v2m_serial2: serial@b000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0b000 0x1000>;
 					interrupts = <7>;
@@ -185,7 +240,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial3: uart@c000 {
+				v2m_serial3: serial@c000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0c000 0x1000>;
 					interrupts = <8>;
@@ -198,7 +253,7 @@
 					reg = <0x0f000 0x1000>;
 					interrupts = <0>;
 					clocks = <&v2m_refclk32khz>, <&smbclk>;
-					clock-names = "wdogclk", "apb_pclk";
+					clock-names = "wdog_clk", "apb_pclk";
 				};
 
 				v2m_timer01: timer@11000 {
@@ -296,7 +351,7 @@
 				};
 			};
 
-			v2m_fixed_3v3: fixed-regulator-0 {
+			v2m_fixed_3v3: regulator-3v3 {
 				compatible = "regulator-fixed";
 				regulator-name = "3V3";
 				regulator-min-microvolt = <3300000>;
@@ -304,21 +359,21 @@
 				regulator-always-on;
 			};
 
-			v2m_clk24mhz: clk24mhz {
+			v2m_clk24mhz: clock-24000000 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <24000000>;
 				clock-output-names = "v2m:clk24mhz";
 			};
 
-			v2m_refclk1mhz: refclk1mhz {
+			v2m_refclk1mhz: clock-1000000 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <1000000>;
 				clock-output-names = "v2m:refclk1mhz";
 			};
 
-			v2m_refclk32khz: refclk32khz {
+			v2m_refclk32khz: clock-32768 {
 				compatible = "fixed-clock";
 				#clock-cells = <0>;
 				clock-frequency = <32768>;
@@ -328,49 +383,49 @@
 			leds {
 				compatible = "gpio-leds";
 
-				user1 {
+				led-user1 {
 					label = "v2m:green:user1";
 					gpios = <&v2m_led_gpios 0 0>;
 					linux,default-trigger = "heartbeat";
 				};
 
-				user2 {
+				led-user2 {
 					label = "v2m:green:user2";
 					gpios = <&v2m_led_gpios 1 0>;
 					linux,default-trigger = "mmc0";
 				};
 
-				user3 {
+				led-user3 {
 					label = "v2m:green:user3";
 					gpios = <&v2m_led_gpios 2 0>;
 					linux,default-trigger = "cpu0";
 				};
 
-				user4 {
+				led-user4 {
 					label = "v2m:green:user4";
 					gpios = <&v2m_led_gpios 3 0>;
 					linux,default-trigger = "cpu1";
 				};
 
-				user5 {
+				led-user5 {
 					label = "v2m:green:user5";
 					gpios = <&v2m_led_gpios 4 0>;
 					linux,default-trigger = "cpu2";
 				};
 
-				user6 {
+				led-user6 {
 					label = "v2m:green:user6";
 					gpios = <&v2m_led_gpios 5 0>;
 					linux,default-trigger = "cpu3";
 				};
 
-				user7 {
+				led-user7 {
 					label = "v2m:green:user7";
 					gpios = <&v2m_led_gpios 6 0>;
 					linux,default-trigger = "cpu4";
 				};
 
-				user8 {
+				led-user8 {
 					label = "v2m:green:user8";
 					gpios = <&v2m_led_gpios 7 0>;
 					linux,default-trigger = "cpu5";
@@ -381,7 +436,7 @@
 				compatible = "arm,vexpress,config-bus";
 				arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-				oscclk0 {
+				clock-controller-0 {
 					/* MCC static memory clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 0>;
@@ -390,7 +445,7 @@
 					clock-output-names = "v2m:oscclk0";
 				};
 
-				v2m_oscclk1: oscclk1 {
+				v2m_oscclk1: clock-controller-1 {
 					/* CLCD clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 1>;
@@ -399,7 +454,7 @@
 					clock-output-names = "v2m:oscclk1";
 				};
 
-				v2m_oscclk2: oscclk2 {
+				v2m_oscclk2: clock-controller-2 {
 					/* IO FPGA peripheral clock */
 					compatible = "arm,vexpress-osc";
 					arm,vexpress-sysreg,func = <1 2>;
@@ -408,7 +463,7 @@
 					clock-output-names = "v2m:oscclk2";
 				};
 
-				volt-vio {
+				regulator-vio {
 					/* Logic level voltage */
 					compatible = "arm,vexpress-volt";
 					arm,vexpress-sysreg,func = <2 0>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
index 0dc4277d5f8b..5a91e936edef 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts
@@ -87,8 +87,8 @@
 		status = "disabled";
 		reg = <0 0x2b060000 0 0x1000>;
 		interrupts = <0 98 4>;
-		clocks = <&sys_pll>;
-		clock-names = "apb_pclk";
+		clocks = <&sys_pll>, <&sys_pll>;
+		clock-names = "wdog_clk", "apb_pclk";
 	};
 
 	gic: interrupt-controller@2c001000 {
@@ -142,7 +142,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0 {
+		clock-controller-0 {
 			/* CPU PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -151,7 +151,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* Multiplexed AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -160,7 +160,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		hdlcd_clk: oscclk5 {
+		hdlcd_clk: clock-controller-5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -169,7 +169,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: oscclk6 {
+		smbclk: clock-controller-6 {
 			/* SMB clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
@@ -178,7 +178,7 @@
 			clock-output-names = "oscclk6";
 		};
 
-		sys_pll: oscclk7 {
+		sys_pll: clock-controller-7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
@@ -187,7 +187,7 @@
 			clock-output-names = "oscclk7";
 		};
 
-		oscclk8 {
+		clock-controller-8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
@@ -196,7 +196,7 @@
 			clock-output-names = "oscclk8";
 		};
 
-		volt-cores {
+		regulator-cores {
 			/* CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -236,63 +236,8 @@
 		};
 	};
 
-	smb@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
+	bus@8000000 {
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
 	};
 
 	site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
index 1de0a658adf1..6ef23c53d2d8 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
@@ -128,7 +128,7 @@
 		reg = <0 0x2a490000 0 0x1000>;
 		interrupts = <0 98 4>;
 		clocks = <&oscclk6a>, <&oscclk6a>;
-		clock-names = "wdogclk", "apb_pclk";
+		clock-names = "wdog_clk", "apb_pclk";
 	};
 
 	hdlcd@2b000000 {
@@ -253,7 +253,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0 {
+		clock-controller-0 {
 			/* A15 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -262,7 +262,7 @@
 			clock-output-names = "oscclk0";
 		};
 
-		oscclk1 {
+		clock-controller-1 {
 			/* A15 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -271,7 +271,7 @@
 			clock-output-names = "oscclk1";
 		};
 
-		oscclk2 {
+		clock-controller-2 {
 			/* A7 PLL 0 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -280,7 +280,7 @@
 			clock-output-names = "oscclk2";
 		};
 
-		oscclk3 {
+		clock-controller-3 {
 			/* A7 PLL 1 reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 3>;
@@ -289,7 +289,7 @@
 			clock-output-names = "oscclk3";
 		};
 
-		oscclk4 {
+		clock-controller-4 {
 			/* External AXI master clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 4>;
@@ -298,7 +298,7 @@
 			clock-output-names = "oscclk4";
 		};
 
-		hdlcd_clk: oscclk5 {
+		hdlcd_clk: clock-controller-5 {
 			/* HDLCD PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 5>;
@@ -307,7 +307,7 @@
 			clock-output-names = "oscclk5";
 		};
 
-		smbclk: oscclk6 {
+		smbclk: clock-controller-6 {
 			/* Static memory controller clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 6>;
@@ -316,7 +316,7 @@
 			clock-output-names = "oscclk6";
 		};
 
-		oscclk7 {
+		clock-controller-7 {
 			/* SYS PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 7>;
@@ -325,7 +325,7 @@
 			clock-output-names = "oscclk7";
 		};
 
-		oscclk8 {
+		clock-controller-8 {
 			/* DDR2 PLL reference clock */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 8>;
@@ -334,7 +334,7 @@
 			clock-output-names = "oscclk8";
 		};
 
-		volt-a15 {
+		regulator-a15 {
 			/* A15 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -345,7 +345,7 @@
 			label = "A15 Vcore";
 		};
 
-		volt-a7 {
+		regulator-a7 {
 			/* A7 CPU core voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
@@ -608,63 +608,8 @@
 		};
 	};
 
-	smb: smb@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
+	smb: bus@8000000 {
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
 	};
 
 	site2: hsb@40000000 {
diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
new file mode 100644
index 000000000000..e3896253f33e
--- /dev/null
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * CoreTile Express A5x2
+ * Cortex-A5 MPCore (V2P-CA5s)
+ *
+ * HBI-0225B
+ */
+
+/dts-v1/;
+#include "vexpress-v2m-rs1.dtsi"
+
+/ {
+	model = "V2P-CA5s";
+	arm,hbi = <0x225>;
+	arm,vexpress,site = <0xf>;
+	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+		i2c0 = &v2m_i2c_dvi;
+		i2c1 = &v2m_i2c_pcie;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Chipselect 2 is physically at 0x18000000 */
+		vram: vram@18000000 {
+			/* 8 MB of designated video RAM */
+			compatible = "shared-dma-pool";
+			reg = <0x18000000 0x00800000>;
+			no-map;
+		};
+	};
+
+	hdlcd@2a110000 {
+		compatible = "arm,hdlcd";
+		reg = <0x2a110000 0x1000>;
+		interrupts = <0 85 4>;
+		clocks = <&hdlcd_clk>;
+		clock-names = "pxlclk";
+	};
+
+	memory-controller@2a150000 {
+		compatible = "arm,pl341", "arm,primecell";
+		reg = <0x2a150000 0x1000>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	memory-controller@2a190000 {
+		compatible = "arm,pl354", "arm,primecell";
+		reg = <0x2a190000 0x1000>;
+		interrupts = <0 86 4>,
+			     <0 87 4>;
+		clocks = <&axi_clk>;
+		clock-names = "apb_pclk";
+	};
+
+	scu@2c000000 {
+		compatible = "arm,cortex-a5-scu";
+		reg = <0x2c000000 0x58>;
+	};
+
+	timer@2c000600 {
+		compatible = "arm,cortex-a5-twd-timer";
+		reg = <0x2c000600 0x20>;
+		interrupts = <1 13 0x304>;
+	};
+
+	timer@2c000200 {
+		compatible = "arm,cortex-a5-global-timer",
+		             "arm,cortex-a9-global-timer";
+		reg = <0x2c000200 0x20>;
+		interrupts = <1 11 0x304>;
+		clocks = <&cpu_clk>;
+	};
+
+	watchdog@2c000620 {
+		compatible = "arm,cortex-a5-twd-wdt";
+		reg = <0x2c000620 0x20>;
+		interrupts = <1 14 0x304>;
+	};
+
+	gic: interrupt-controller@2c001000 {
+		compatible = "arm,cortex-a5-gic", "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0x2c001000 0x1000>,
+		      <0x2c000100 0x100>;
+	};
+
+	L2: cache-controller@2c0f0000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x2c0f0000 0x1000>;
+		interrupts = <0 84 4>;
+		cache-level = <2>;
+		cache-unified;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <0 68 4>,
+			     <0 69 4>;
+	};
+
+	dcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		cpu_clk: clock-controller-0 {
+			/* CPU and internal AXI reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		axi_clk: clock-controller-1 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <5000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		clock-controller-2 {
+			/* DDR2 */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <80000000 120000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		hdlcd_clk: clock-controller-3 {
+			/* HDLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		clock-controller-4 {
+			/* Test chip gate configuration */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <80000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		smbclk: clock-controller-5 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <25000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		temp-dcc {
+			/* DCC internal operating temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+	};
+
+	smb: bus@8000000 {
+		ranges = <0 0x8000000 0x18000000>;
+	};
+
+	site2: hsb@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x40000000 0x40000000>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 3>;
+		interrupt-map = <0 0 &gic 0 36 4>,
+				<0 1 &gic 0 37 4>,
+				<0 2 &gic 0 38 4>,
+				<0 3 &gic 0 39 4>;
+	};
+};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
index d796efaadbe3..43a5a4ab6ff0 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts
@@ -20,7 +20,9 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	chosen { };
+	chosen {
+		stdout-path = &v2m_serial0;
+	};
 
 	aliases {
 		serial0 = &v2m_serial0;
@@ -122,8 +124,8 @@
 		reg = <0x100e4000 0x1000>;
 		interrupts = <0 48 4>,
 			     <0 49 4>;
-		clocks = <&oscclk2>, <&oscclk2>;
-		clock-names = "timclk", "apb_pclk";
+		clocks = <&oscclk2>, <&oscclk2>, <&oscclk2>;
+		clock-names = "timer0clk", "timer1clk", "apb_pclk";
 		status = "disabled";
 	};
 
@@ -132,7 +134,7 @@
 		reg = <0x100e5000 0x1000>;
 		interrupts = <0 51 4>;
 		clocks = <&oscclk2>, <&oscclk2>;
-		clock-names = "wdogclk", "apb_pclk";
+		clock-names = "wdog_clk", "apb_pclk";
 	};
 
 	scu@1e000000 {
@@ -185,7 +187,7 @@
 		compatible = "arm,vexpress,config-bus";
 		arm,vexpress,config-bridge = <&v2m_sysreg>;
 
-		oscclk0: extsaxiclk {
+		oscclk0: clock-controller-0 {
 			/* ACLK clock to the AXI master port on the test chip */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 0>;
@@ -194,7 +196,7 @@
 			clock-output-names = "extsaxiclk";
 		};
 
-		oscclk1: clcdclk {
+		oscclk1: clock-controller-1 {
 			/* Reference clock for the CLCD */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 1>;
@@ -203,7 +205,7 @@
 			clock-output-names = "clcdclk";
 		};
 
-		smbclk: oscclk2: tcrefclk {
+		smbclk: oscclk2: clock-controller-2 {
 			/* Reference clock for the test chip internal PLLs */
 			compatible = "arm,vexpress-osc";
 			arm,vexpress-sysreg,func = <1 2>;
@@ -212,7 +214,7 @@
 			clock-output-names = "tcrefclk";
 		};
 
-		volt-vd10 {
+		regulator-vd10 {
 			/* Test Chip internal logic voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 0>;
@@ -221,7 +223,7 @@
 			label = "VD10";
 		};
 
-		volt-vd10-s2 {
+		regulator-vd10-s2 {
 			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 1>;
@@ -230,7 +232,7 @@
 			label = "VD10_S2";
 		};
 
-		volt-vd10-s3 {
+		regulator-vd10-s3 {
 			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 2>;
@@ -239,7 +241,7 @@
 			label = "VD10_S3";
 		};
 
-		volt-vcc1v8 {
+		regulator-vcc1v8 {
 			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 3>;
@@ -248,7 +250,7 @@
 			label = "VCC1V8";
 		};
 
-		volt-ddr2vtt {
+		regulator-ddr2vtt {
 			/* DDR2 SDRAM VTT termination voltage */
 			compatible = "arm,vexpress-volt";
 			arm,vexpress-sysreg,func = <2 4>;
@@ -257,7 +259,7 @@
 			label = "DDR2VTT";
 		};
 
-		volt-vcc3v3 {
+		regulator-vcc3v3 {
 			/* Local board supply for miscellaneous logic external to the Test Chip */
 			arm,vexpress-sysreg,func = <2 5>;
 			compatible = "arm,vexpress-volt";
@@ -295,64 +297,6 @@
 		};
 	};
 
-	smb: smb@4000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x40000000 0x04000000>,
-			 <1 0 0x44000000 0x04000000>,
-			 <2 0 0x48000000 0x04000000>,
-			 <3 0 0x4c000000 0x04000000>,
-			 <7 0 0x10000000 0x00020000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-	};
-
 	site2: hsb@e0000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
deleted file mode 100644
index 3cf70c72c5ca..000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Vincent Donnefort <vdonnefort@gmail.com>
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate NAS 4-Bay
- * Code name (board/PCB)        : Dart 4-Bay
- * Model name (case sticker)    : SRPD40
- * Material desc (product spec) : STCUxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-nas-xbay.dtsi"
-#include <dt-bindings/leds/leds-ns2.h>
-
-/ {
-	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
-	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
-
-	soc {
-		internal-regs {
-			ethernet@74000 {
-				status = "okay";
-				pinctrl-0 = <&ge1_rgmii_pins>;
-				pinctrl-names = "default";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			i2c@11000 {
-				/* I2C GPIO expander (PCA9554A) */
-				pca9554: pca9554@21 {
-					compatible = "nxp,pca9554";
-					reg = <0x21>;
-					#gpio-cells = <2>;
-					gpio-controller;
-				};
-			};
-		};
-	};
-
-	regulators {
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "SATA2 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
-		};
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "SATA3 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio-leds {
-		red-sata2 {
-			label = "dart:red:sata2";
-			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
-		};
-		red-sata3 {
-			label = "dart:red:sata3";
-			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds-ns2 {
-		compatible = "lacie,ns2-leds";
-
-		white-sata2 {
-			label = "dart:white:sata2";
-			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
-			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
-			num-modes = <4>;
-			modes-map = <NS_V2_LED_SATA 0 0
-				     NS_V2_LED_OFF  0 1
-				     NS_V2_LED_ON   1 0
-				     NS_V2_LED_ON   1 1>;
-		};
-		white-sata3 {
-			label = "dart:white:sata3";
-			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
-			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
-			num-modes = <4>;
-			modes-map = <NS_V2_LED_SATA 0 0
-				     NS_V2_LED_OFF  0 1
-				     NS_V2_LED_ON   1 0
-				     NS_V2_LED_ON   1 1>;
-		};
-	};
-
-	gpio-fan {
-		gpio-fan,speed-map =
-			<   0 3
-			  800 2
-			  1050 1
-			  1300 0>;
-	};
-};
-
-&pciec {
-	/* SATA AHCI controller 88SE9170 */
-	pcie@1,0 {
-		status = "okay";
-	};
-};
-
-&mdio {
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-};
-
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
deleted file mode 100644
index 5ee572dc9242..000000000000
--- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
- *
- * Copyright (C) 2015 Seagate
- *
- * Author: Simon Guinot <simon.guinot@sequanux.org>
- */
-
-/*
- * Here are some information allowing to identify the device:
- *
- * Product name                 : Seagate Personal Cloud 2-Bay
- * Code name (board/PCB)        : Cumulus Max
- * Model name (case sticker)    : SRN22C
- * Material desc (product spec) : STCSxxxxxxx
- */
-
-/dts-v1/;
-#include "armada-370-seagate-personal-cloud.dtsi"
-
-/ {
-	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
-	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
-
-	soc {
-		internal-regs {
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <2>;
-			};
-		};
-	};
-
-	regulators {
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "SATA1 power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
deleted file mode 100644
index cff1269f3fbf..000000000000
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 380 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 380 family SoC";
-	compatible = "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-	};
-
-	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6810-pinctrl";
-			};
-		};
-
-		pcie {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */>;
-
-			/* x1 port */
-			pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
deleted file mode 100644
index 768b6c5d2129..000000000000
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-/*
- * Device Tree file for the Turris Omnia
- *
- * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
- * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
- *
- * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385.dtsi"
-
-/ {
-	model = "Turris Omnia";
-	compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = &uart0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>; /* 1024 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
-
-		internal-regs {
-
-			/* USB part of the PCIe2/USB 2.0 port */
-			usb@58000 {
-				status = "okay";
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sdhci@d8000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&sdhci_pins>;
-				status = "okay";
-
-				bus-width = <8>;
-				no-1-8-v;
-				non-removable;
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		pcie {
-			status = "okay";
-
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@3,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-/* Connected to 88E6176 switch, port 6 */
-&eth0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ge0_rgmii_pins>;
-	status = "okay";
-	phy-mode = "rgmii";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-/* Connected to 88E6176 switch, port 5 */
-&eth1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ge1_rgmii_pins>;
-	status = "okay";
-	phy-mode = "rgmii";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-/* WAN port */
-&eth2 {
-	status = "okay";
-	phy-mode = "sgmii";
-	phy = <&phy1>;
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-	status = "okay";
-
-	i2cmux@70 {
-		compatible = "nxp,pca9547";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		status = "okay";
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			/* STM32F0 command interface at address 0x2a */
-			/* leds device (in STM32F0) at address 0x2b */
-
-			eeprom@54 {
-				compatible = "atmel,24c64";
-				reg = <0x54>;
-
-				/* The EEPROM contains data for bootloader.
-				 * Contents:
-				 * 	struct omnia_eeprom {
-				 * 		u32 magic; (=0x0341a034 in LE)
-				 *		u32 ramsize; (in GiB)
-				 * 		char regdomain[4];
-				 * 		u32 crc32;
-				 * 	};
-				 */
-			};
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			/* routed to PCIe0/mSATA connector (CN7A) */
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			/* routed to PCIe1/USB2 connector (CN61A) */
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			/* routed to PCIe2 connector (CN62A) */
-		};
-
-		i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			/* routed to SFP+ */
-		};
-
-		i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			/* ATSHA204A at address 0x64 */
-		};
-
-		i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			/* exposed on pin header */
-		};
-
-		i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			pcawan: gpio@71 {
-				/*
-				 * GPIO expander for SFP+ signals and
-				 * and phy irq
-				 */
-				compatible = "nxp,pca9538";
-				reg = <0x71>;
-
-				pinctrl-names = "default";
-				pinctrl-0 = <&pcawan_pins>;
-
-				interrupt-parent = <&gpio1>;
-				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
-
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-		};
-	};
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>;
-	status = "okay";
-
-	phy1: phy@1 {
-		status = "okay";
-		compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-
-		/* irq is connected to &pcawan pin 7 */
-	};
-
-	/* Switch MV88E6176 at address 0x10 */
-	switch@10 {
-		compatible = "marvell,mv88e6085";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		dsa,member = <0 0>;
-
-		reg = <0x10>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ports@0 {
-				reg = <0>;
-				label = "lan0";
-			};
-
-			ports@1 {
-				reg = <1>;
-				label = "lan1";
-			};
-
-			ports@2 {
-				reg = <2>;
-				label = "lan2";
-			};
-
-			ports@3 {
-				reg = <3>;
-				label = "lan3";
-			};
-
-			ports@4 {
-				reg = <4>;
-				label = "lan4";
-			};
-
-			ports@5 {
-				reg = <5>;
-				label = "cpu";
-				ethernet = <&eth1>;
-				phy-mode = "rgmii-id";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			/* port 6 is connected to eth0 */
-		};
-	};
-};
-
-&pinctrl {
-	pcawan_pins: pcawan-pins {
-		marvell,pins = "mpp46";
-		marvell,function = "gpio";
-	};
-
-	spi0cs0_pins: spi0cs0-pins {
-		marvell,pins = "mpp25";
-		marvell,function = "spi0";
-	};
-
-	spi0cs1_pins: spi0cs1-pins {
-		marvell,pins = "mpp26";
-		marvell,function = "spi0";
-	};
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
-	status = "okay";
-
-	spi-nor@0 {
-		compatible = "spansion,s25fl164k", "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <40000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x00100000>;
-				label = "U-Boot";
-			};
-
-			partition@100000 {
-				reg = <0x00100000 0x00700000>;
-				label = "Rescue system";
-			};
-		};
-	};
-
-	/* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */
-};
-
-&uart0 {
-	/* Pin header CN10 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-	status = "okay";
-};
-
-&uart1 {
-	/* Pin header CN11 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
deleted file mode 100644
index f0022d10c715..000000000000
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada 385 SoC.
- *
- * Copyright (C) 2014 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-#include "armada-38x.dtsi"
-
-/ {
-	model = "Marvell Armada 385 family SoC";
-	compatible = "marvell,armada385", "marvell,armada380";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-380-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-		};
-	};
-
-	soc {
-		pciec: pcie {
-			compatible = "marvell,armada-370-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-				0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000
-				0x82000000 0x1 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 3 IO  */>;
-
-			/*
-			 * This port can be either x4 or x1. When
-			 * configured in x4 by the bootloader, then
-			 * pcie@4,0 is not available.
-			 */
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			/* x1 port */
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			/*
-			 * x1 port only available when pcie@1,0 is
-			 * configured as a x1 port
-			 */
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv88f6820-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
deleted file mode 100644
index a2bec07bf4c5..000000000000
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ /dev/null
@@ -1,176 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Marvell Armada 388 evaluation board
- * (DB-88F6820)
- *
- *  Copyright (C) 2014 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- */
-
-/dts-v1/;
-#include "armada-388.dtsi"
-
-/ {
-	model = "Marvell Armada 385 Development Board";
-	compatible = "marvell,a385-db", "marvell,armada388",
-		"marvell,armada385", "marvell,armada380";
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>; /* 256 MB */
-	};
-
-	soc {
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
-			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
-		internal-regs {
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-			};
-
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@30000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <2>;
-				bm,pool-short = <3>;
-			};
-
-			usb@58000 {
-				status = "ok";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-				buffer-manager = <&bm>;
-				bm,pool-long = <0>;
-				bm,pool-short = <1>;
-			};
-
-			mdio@72004 {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			sata@e0000 {
-				status = "okay";
-			};
-
-			bm@c8000 {
-				status = "okay";
-			};
-
-			sdhci@d8000 {
-				broken-cd;
-				wp-inverted;
-				bus-width = <8>;
-				status = "okay";
-				no-1-8-v;
-			};
-
-			usb3@f0000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-			};
-		};
-
-		bm-bppi {
-			status = "okay";
-		};
-
-		pcie {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "w25q32", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <108000000>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		label = "pxa3xx_nand-0";
-		nand-rb = <0>;
-		marvell,nand-keep-config;
-		nand-on-flash-bbt;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "U-Boot";
-				reg = <0 0x800000>;
-			};
-			partition@800000 {
-				label = "Linux";
-				reg = <0x800000 0x800000>;
-			};
-			partition@1000000 {
-				label = "Filesystem";
-				reg = <0x1000000 0x3f000000>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
deleted file mode 100644
index 8558bf6bb54c..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78230 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78230 SoC";
-	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x1 only.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <17>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>;
-				clocks = <&coreclk 0>;
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78230-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
deleted file mode 100644
index 2d85fe8ac327..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ /dev/null
@@ -1,314 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78260 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78260 SoC";
-	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4 only.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie6: pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie7: pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie8: pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie9: pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-xp-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78260-pinctrl";
-};
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
deleted file mode 100644
index 230a3fd36b30..000000000000
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ /dev/null
@@ -1,353 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree Include file for Marvell Armada XP family SoC
- *
- * Copyright (C) 2012 Marvell
- *
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * Contains definitions specific to the Armada XP MV78460 SoC that are not
- * common to all Armada XP SoCs.
- */
-
-#include "armada-xp.dtsi"
-
-/ {
-	model = "Marvell Armada XP MV78460 SoC";
-	compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "marvell,armada-xp-smp";
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <0>;
-			clocks = <&cpuclk 0>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <1>;
-			clocks = <&cpuclk 1>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <2>;
-			clocks = <&cpuclk 2>;
-			clock-latency = <1000000>;
-		};
-
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "marvell,sheeva-v7";
-			reg = <3>;
-			clocks = <&cpuclk 3>;
-			clock-latency = <1000000>;
-		};
-	};
-
-	soc {
-		/*
-		 * MV78460 has 4 PCIe units Gen2.0: Two units can be
-		 * configured as x4 or quad x1 lanes. Two units are
-		 * x4/x1.
-		 */
-		pciec: pcie@82000000 {
-			compatible = "marvell,armada-xp-pcie";
-			status = "disabled";
-			device_type = "pci";
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&mpic>;
-			bus-range = <0x00 0xff>;
-
-			ranges =
-			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
-				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
-				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
-				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
-				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
-				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
-				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
-				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
-				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
-				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-				0x81000000 0x2 0     MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
-				0x82000000 0x3 0     MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
-				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-
-				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
-				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
-				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
-
-				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */
-
-				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
-
-			pcie1: pcie@1,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 5>;
-				status = "disabled";
-			};
-
-			pcie2: pcie@2,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 6>;
-				status = "disabled";
-			};
-
-			pcie3: pcie@3,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-				reg = <0x1800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 7>;
-				status = "disabled";
-			};
-
-			pcie4: pcie@4,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-				reg = <0x2000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
-				marvell,pcie-port = <0>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 8>;
-				status = "disabled";
-			};
-
-			pcie5: pcie@5,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x2800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 9>;
-				status = "disabled";
-			};
-
-			pcie6: pcie@6,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-				reg = <0x3000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <1>;
-				clocks = <&gateclk 10>;
-				status = "disabled";
-			};
-
-			pcie7: pcie@7,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-				reg = <0x3800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <2>;
-				clocks = <&gateclk 11>;
-				status = "disabled";
-			};
-
-			pcie8: pcie@8,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-				reg = <0x4000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
-				marvell,pcie-port = <1>;
-				marvell,pcie-lane = <3>;
-				clocks = <&gateclk 12>;
-				status = "disabled";
-			};
-
-			pcie9: pcie@9,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
-				status = "disabled";
-			};
-
-			pcie10: pcie@a,0 {
-				device_type = "pci";
-				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
-				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
-				marvell,pcie-port = <3>;
-				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
-				status = "disabled";
-			};
-		};
-
-		internal-regs {
-			gpio0: gpio@18100 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18100 0x40>, <0x181c0 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <82>, <83>, <84>, <85>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio1: gpio@18140 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18140 0x40>, <0x181c8 0x08>;
-				reg-names = "gpio", "pwm";
-				ngpios = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				#pwm-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <87>, <88>, <89>, <90>;
-				clocks = <&coreclk 0>;
-			};
-
-			gpio2: gpio@18180 {
-				compatible = "marvell,armada-370-gpio",
-					     "marvell,orion-gpio";
-				reg = <0x18180 0x40>;
-				ngpios = <3>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <91>;
-			};
-
-			eth3: ethernet@34000 {
-				compatible = "marvell,armada-xp-neta";
-				reg = <0x34000 0x4000>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-			};
-		};
-	};
-};
-
-&pinctrl {
-	compatible = "marvell,mv78460-pinctrl";
-};
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
deleted file mode 100644
index 9870553919b7..000000000000
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2019 IBM Corp.
-
-/dts-v1/;
-
-#include "aspeed-g6.dtsi"
-
-/ {
-	model = "AST2600 EVB";
-	compatible = "aspeed,ast2600";
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-	chosen {
-		bootargs = "console=ttyS4,115200n8";
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-};
-
-&mdio1 {
-	status = "okay";
-
-	ethphy1: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&mdio2 {
-	status = "okay";
-
-	ethphy2: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&mdio3 {
-	status = "okay";
-
-	ethphy3: ethernet-phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
-
-&mac1 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy1>;
-};
-
-&mac2 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy2>;
-};
-
-&mac3 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy3>;
-};
-
-&emmc {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts b/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
deleted file mode 100644
index c2ece0b91885..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Qualcomm Centriq 2400  REP AST2520";
-	compatible = "qualcomm,centriq2400-rep-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x40000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-                        <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		uid_led {
-			label = "UID_LED";
-			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-		};
-
-		ras_error_led {
-			label = "RAS_ERROR_LED";
-			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-		};
-
-		system_fault {
-			label = "System_fault";
-			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-	};
-};
-
-&spi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2ck_default
-			&pinctrl_spi2miso_default
-			&pinctrl_spi2mosi_default
-			&pinctrl_spi2cs0_default>;
-};
-
-&uart3 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
-	current-speed = <115200>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	tmp421@1e {
-		compatible = "ti,tmp421";
-		reg = <0x1e>;
-	};
-	tmp421@2a {
-		compatible = "ti,tmp421";
-		reg = <0x2a>;
-	};
-	tmp421@4e {
-		compatible = "ti,tmp421";
-		reg = <0x4e>;
-	};
-	tmp421@1c {
-		compatible = "ti,tmp421";
-		reg = <0x1c>;
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp421@1d {
-		compatible = "ti,tmp421";
-		reg = <0x1d>;
-	};
-	tmp421@1f {
-		compatible = "ti,tmp421";
-		reg = <0x1f>;
-	};
-	tmp421@4d {
-		compatible = "ti,tmp421";
-		reg = <0x4d>;
-	};
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-	nvt210@4c {
-		compatible = "nvt210";
-		reg = <0x4c>;
-	};
-	eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <128>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca9641@70 {
-		compatible = "nxp,pca9641";
-		reg = <0x70>;
-		i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			tmp421@1d {
-				compatible = "tmp421";
-				reg = <0x1d>;
-			};
-			adm1278@12 {
-				compatible = "adi,adm1278";
-				reg = <0x12>;
-				Rsense = <500>;
-			};
-			eeprom@50 {
-				compatible = "atmel,24c02";
-				reg = <0x50>;
-			};
-			ds1100@58 {
-				compatible = "ds1100";
-				reg = <0x58>;
-			};
-		};
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&gpio {
-	pin_gpio_c7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
-		output;
-		line-name = "BIOS_SPI_MUX_S";
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
deleted file mode 100644
index d519d307aa2a..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
+++ /dev/null
@@ -1,382 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-
-/ {
-	model = "Facebook Backpack CMM BMC";
-	compatible = "facebook,cmm-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 * Override the default uart aliases to avoid breaking
-		 * the legacy applications.
-		 */
-		serial0 = &uart5;
-		serial1 = &uart1;
-		serial2 = &uart3;
-		serial3 = &uart4;
-
-		/*
-		 * Hardcode the bus number of i2c switches' channels to
-		 * avoid breaking the legacy applications.
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-		bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlyprintk";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	ast-adc-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
-	};
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-/*
- * Update reset type to "system" (full chip) to fix warm reboot hang issue
- * when reset type is set to default ("soc", gated by reset mask registers).
- */
-&wdt1 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-/*
- * wdt2 is not used by Backpack CMM.
- */
-&wdt2 {
-	status = "disabled";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "facebook-bmc-flash-layout.dtsi"
-	};
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default
-		     &pinctrl_ncts1_default
-		     &pinctrl_ndcd1_default
-		     &pinctrl_ndsr1_default
-		     &pinctrl_ndtr1_default
-		     &pinctrl_nrts1_default>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default
-		     &pinctrl_rxd3_default
-		     &pinctrl_ncts3_default
-		     &pinctrl_ndcd3_default
-		     &pinctrl_nri3_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac1 {
-	status = "okay";
-	no-hw-checksum;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-/*
- * I2C bus reserved for communication with COM-E.
- */
-&i2c0 {
-	status = "okay";
-};
-
-/*
- * I2C bus to Line Cards and Fabric Cards.
- */
-&i2c1 {
-	status = "okay";
-
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-/*
- * I2C bus to Power Distribution Board.
- */
-&i2c2 {
-	status = "okay";
-
-	i2c-switch@71 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-/*
- * I2c bus connected with temperature sensors on CMM.
- */
-&i2c3 {
-	status = "okay";
-};
-
-/*
- * I2C bus reserved for communication with COM-E.
- */
-&i2c4 {
-	status = "okay";
-};
-
-/*
- * I2c bus connected with ADM1278.
- */
-&i2c5 {
-	status = "okay";
-};
-
-/*
- * I2c bus connected with I/O Expander.
- */
-&i2c6 {
-	status = "okay";
-};
-
-/*
- * I2c bus connected with I/O Expander and EPROMs.
- */
-&i2c7 {
-	status = "okay";
-};
-
-/*
- * I2C bus to Fan Control Board.
- */
-&i2c8 {
-	status = "okay";
-
-	i2c-switch@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-/*
- * I2C bus to CMM CPLD.
- */
-&i2c13 {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
deleted file mode 100644
index c05478296446..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
+++ /dev/null
@@ -1,429 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-
-/ {
-	model = "Facebook Minipack 100 BMC";
-	compatible = "facebook,minipack-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 * Override the default serial aliases to avoid breaking
-		 * the legacy applications.
-		 */
-		serial0 = &uart5;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-
-		/*
-		 * i2c switch 2-0070, pca9548, 8 child channels assigned
-		 * with bus number 16-23.
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * i2c switch 8-0070, pca9548, 8 child channels assigned
-		 * with bus number 24-31.
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * i2c switch 9-0070, pca9548, 8 child channels assigned
-		 * with bus number 32-39.
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		/*
-		 * i2c switch 11-0070, pca9548, 8 child channels assigned
-		 * with bus number 40-47.
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-		bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&wdt1 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-&wdt2 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "facebook-bmc-flash-layout.dtsi"
-	};
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default
-		     &pinctrl_ncts1_default
-		     &pinctrl_ndsr1_default
-		     &pinctrl_ndtr1_default
-		     &pinctrl_nrts1_default>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-		     &pinctrl_rxd2_default>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default
-		     &pinctrl_rxd3_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac1 {
-	status = "okay";
-	no-hw-checksum;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-	bus-frequency = <400000>;
-	multi-master;
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-	multi-master;
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		imux40: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux41: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux42: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux43: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux44: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux45: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux46: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux47: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
deleted file mode 100644
index 682f729ea25e..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ /dev/null
@@ -1,464 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-// Author: Vijay Khemka <vijaykhemka@fb.com>
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Facebook TiogaPass BMC";
-	compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
-	aliases {
-		serial0 = &uart1;
-		serial4 = &uart5;
-
-		/*
-		 * Hardcode the bus number of i2c switches' channels to
-		 * avoid breaking the legacy applications.
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-	};
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
-			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&lpc_snoop {
-	status = "okay";
-	snoop-ports = <0x80>;
-};
-
-&lpc_ctrl {
-	// Enable lpc clock
-	status = "okay";
-};
-
-&vuart {
-	// VUART Host Console
-	status = "okay";
-};
-
-&uart1 {
-	// Host Console
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
-};
-
-&uart2 {
-	// SoL Host Console
-	status = "okay";
-};
-
-&uart3 {
-	// SoL BMC Console
-	status = "okay";
-};
-
-&uart5 {
-	// BMC Console
-	status = "okay";
-};
-
-&kcs2 {
-	// BMC KCS channel 2
-	status = "okay";
-	kcs_addr = <0xca8>;
-};
-
-&kcs3 {
-	// BMC KCS channel 3
-	status = "okay";
-	kcs_addr = <0xca2>;
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	use-ncsi;
-};
-
-&adc {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	//Airmax Conn B, CPU0 PIROM, CPU1 PIROM
-};
-
-&i2c1 {
-	status = "okay";
-	//X24 Riser
-	i2c-switch@71 {
-		compatible = "nxp,pca9544";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			ina230@45 {
-				compatible = "ti,ina230";
-				reg = <0x45>;
-			};
-
-			tmp75@48 {
-				compatible = "ti,tmp75";
-				reg = <0x48>;
-			};
-
-			tmp421@49 {
-				compatible = "ti,tmp75";
-				reg = <0x49>;
-			};
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-				pagesize = <32>;
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9546";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-
-				imux20: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux21: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux22: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux23: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-			};
-
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			ina230@45 {
-				compatible = "ti,ina230";
-				reg = <0x45>;
-			};
-
-			tmp421@48 {
-				compatible = "ti,tmp75";
-				reg = <0x48>;
-			};
-
-			tmp421@49 {
-				compatible = "ti,tmp75";
-				reg = <0x49>;
-			};
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-				pagesize = <32>;
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9546";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-
-				imux24: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux25: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux26: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux27: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-			};
-
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			ina230@45 {
-				compatible = "ti,ina230";
-				reg = <0x45>;
-			};
-
-			tmp421@48 {
-				compatible = "ti,tmp75";
-				reg = <0x48>;
-			};
-
-			tmp421@49 {
-				compatible = "ti,tmp75";
-				reg = <0x49>;
-			};
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-				pagesize = <32>;
-			};
-
-			i2c-switch@73 {
-				compatible = "nxp,pca9546";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x73>;
-
-				imux28: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux29: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux30: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux31: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-			};
-
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-switch@40 {
-				compatible = "ti,ina230";
-				reg = <0x40>;
-			};
-
-			i2c-switch@41 {
-				compatible = "ti,ina230";
-				reg = <0x41>;
-			};
-
-			i2c-switch@45 {
-				compatible = "ti,ina230";
-				reg = <0x45>;
-			};
-
-		};
-
-	};
-};
-
-&i2c2 {
-	status = "okay";
-	// Mezz Management SMBus
-};
-
-&i2c3 {
-	status = "okay";
-	// SMBus to Board ID EEPROM
-};
-
-&i2c4 {
-	status = "okay";
-	// BMC Debug Header
-};
-
-&i2c5 {
-	status = "okay";
-	// CPU Voltage regulators
-	regulator@48 {
-		compatible = "infineon,pxe1610";
-		reg = <0x48>;
-	};
-	regulator@4a {
-		compatible = "infineon,pxe1610";
-		reg = <0x4a>;
-	};
-	regulator@50 {
-		compatible = "infineon,pxe1610";
-		reg = <0x50>;
-	};
-	regulator@52 {
-		compatible = "infineon,pxe1610";
-		reg = <0x52>;
-	};
-	regulator@58 {
-		compatible = "infineon,pxe1610";
-		reg = <0x58>;
-	};
-	regulator@5a {
-		compatible = "infineon,pxe1610";
-		reg = <0x5a>;
-	};
-	regulator@68 {
-		compatible = "infineon,pxe1610";
-		reg = <0x68>;
-	};
-	regulator@70 {
-		compatible = "infineon,pxe1610";
-		reg = <0x70>;
-	};
-	regulator@72 {
-		compatible = "infineon,pxe1610";
-		reg = <0x72>;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-	tpm@20 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x20>;
-	};
-	tmp421@4e {
-		compatible = "ti,tmp421";
-		reg = <0x4e>;
-	};
-	tmp421@4f {
-		compatible = "ti,tmp421";
-		reg = <0x4f>;
-	};
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-		pagesize = <32>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-	//HSC, AirMax Conn A
-};
-
-&i2c8 {
-	status = "okay";
-	tmp421@1f {
-		compatible = "ti,tmp421";
-		reg = <0x1f>;
-	};
-	//Mezz Sensor SMBus
-};
-
-&i2c9 {
-	status = "okay";
-	//USB Debug Connector
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
deleted file mode 100644
index b1e10f0c85c9..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-/dts-v1/;
-
-#include "aspeed-g4.dtsi"
-
-/ {
-	model = "Facebook Wedge 100 BMC";
-	compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
-
-	aliases {
-		/*
-		 * Override the default uart aliases to avoid breaking
-		 * the legacy applications.
-		 */
-		serial0 = &uart5;
-		serial1 = &uart1;
-		serial2 = &uart3;
-		serial3 = &uart4;
-	};
-
-	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
-	};
-
-	memory@40000000 {
-		reg = <0x40000000 0x20000000>;
-	};
-};
-
-&wdt1 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-&wdt2 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "fmc0";
-#include "facebook-bmc-flash-layout.dtsi"
-	};
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default
-		     &pinctrl_rxd3_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac1 {
-	status = "okay";
-	no-hw-checksum;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-
-	i2c-switch@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
deleted file mode 100644
index aaa77a597d1a..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-/dts-v1/;
-
-#include "aspeed-g4.dtsi"
-
-/ {
-	model = "Facebook Wedge 40 BMC";
-	compatible = "facebook,wedge40-bmc", "aspeed,ast2400";
-
-	aliases {
-		/*
-		 * Override the default uart aliases to avoid breaking
-		 * the legacy applications.
-		 */
-		serial0 = &uart5;
-		serial1 = &uart1;
-		serial2 = &uart3;
-		serial3 = &uart4;
-	};
-
-	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
-	};
-
-	memory@40000000 {
-		reg = <0x40000000 0x20000000>;
-	};
-};
-
-&wdt1 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-&wdt2 {
-	status = "disabled";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "fmc0";
-#include "facebook-bmc-flash-layout.dtsi"
-	};
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default
-		     &pinctrl_rxd3_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac1 {
-	status = "okay";
-	no-hw-checksum;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
deleted file mode 100644
index 4e09a9cf32b7..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
+++ /dev/null
@@ -1,160 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-// Copyright (c) 2018 Facebook Inc.
-/dts-v1/;
-
-#include "aspeed-g5.dtsi"
-
-/ {
-	model = "Facebook YAMP 100 BMC";
-	compatible = "facebook,yamp-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 * Override the default uart aliases to avoid breaking
-		 * the legacy applications.
-		 */
-		serial0 = &uart5;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-/*
- * Update reset type to "system" (full chip) to fix warm reboot hang issue
- * when reset type is set to default ("soc", gated by reset mask registers).
- */
-&wdt1 {
-	status = "okay";
-	aspeed,reset-type = "system";
-};
-
-/*
- * wdt2 is not used by Yamp.
- */
-&wdt2 {
-	status = "disabled";
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "facebook-bmc-flash-layout.dtsi"
-	};
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-		     &pinctrl_rxd1_default>;
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-		     &pinctrl_rxd2_default>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd3_default
-		     &pinctrl_rxd3_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-	use-ncsi;
-	no-hw-checksum;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	i2c-switch@75 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x75>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
deleted file mode 100644
index e55cc454b17f..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ /dev/null
@@ -1,918 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Mihawk BMC";
-	compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
-
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 6)>;
-		};
-
-		checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 2)>;
-		};
-
-		ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Z, 0)>;
-		};
-		id-button {
-			label = "id-button";
-			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(F, 1)>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		poll-interval = <1000>;
-
-		fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-
-		fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
-			linux,code = <10>;
-		};
-
-		fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
-			linux,code = <11>;
-		};
-
-		fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		fan4-presence {
-			label = "fan4-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		fan5-presence {
-			label = "fan5-presence";
-			gpios = <&pca9552 14 GPIO_ACTIVE_LOW>;
-			linux,code = <14>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		power {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-g {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-ok {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
-		};
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fan4 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
-		};
-
-		fan5 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca9552 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-	};
-	iio-hwmon-12v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>;
-	};
-
-	iio-hwmon-5v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 1>;
-	};
-
-	iio-hwmon-3v {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 2>;
-	};
-
-	iio-hwmon-vdd0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 3>;
-	};
-
-	iio-hwmon-vdd1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 4>;
-	};
-
-	iio-hwmon-vcs0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 5>;
-	};
-
-	iio-hwmon-vcs1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 6>;
-	};
-
-	iio-hwmon-vdn0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 7>;
-	};
-
-	iio-hwmon-vdn1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 8>;
-	};
-
-	iio-hwmon-vio0 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 9>;
-	};
-
-	iio-hwmon-vio1 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 10>;
-	};
-
-	iio-hwmon-vddra {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 11>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	iio-hwmon-vddrb {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 13>;
-	};
-
-	iio-hwmon-vddrc {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 14>;
-	};
-
-	iio-hwmon-vddrd {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
-	};
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
-		&pinctrl_pwm2_default &pinctrl_pwm3_default
-		&pinctrl_pwm4_default &pinctrl_pwm5_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
-	};
-
-	fan@1 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
-	};
-
-	fan@2 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
-	};
-
-	fan@3 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
-	};
-
-	fan@4 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
-	};
-
-	fan@5 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
-	};
-
-	fan@6 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
-	};
-
-	fan@7 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
-	};
-
-	fan@8 {
-		reg = <0x02>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@9 {
-		reg = <0x03>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@10 {
-		reg = <0x04>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@11 {
-		reg = <0x05>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "obmc-ubi";
-			};
-		};
-	};
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <50000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x1F80000 >;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	use-ncsi;
-};
-
-&mac1 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
-	status = "disabled";
-};
-
-&i2c1 {
-	status = "disabled";
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* SAMTEC P0 */
-	/* SAMTEC P1 */
-
-};
-
-&i2c3 {
-	status = "okay";
-
-	/* APSS */
-	/* CPLD */
-
-	/* PCA9516 (repeater) ->
-	 *    CLK Buffer 9FGS9092
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    CLK Buffer 9DBL0651BKILFT
-	 *    Power Supply 0
-	 *    Power Supply 1
-	 *    PCA 9552 LED
-	 */
-
-	power-supply@58 {
-		compatible = "ibm,cffps1";
-		reg = <0x58>;
-	};
-
-	power-supply@5b {
-		compatible = "ibm,cffps1";
-		reg = <0x5b>;
-	};
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-	};
-
-};
-
-&i2c4 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c5 {
-	status = "okay";
-
-	/* CP0 VDD & VCS : IR35221 */
-	/* CP0 VDN : IR35221 */
-	/* CP0 VIO : IR38064 */
-	/* CP0 VDDR : PXM1330 */
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-};
-
-&i2c6 {
-	status = "okay";
-
-	/* pca9548 -> NVMe1 to 8 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-	};
-
-};
-
-&i2c7 {
-	status = "okay";
-
-	/* pca9548 -> NVMe9 to 16 */
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-	};
-
-};
-
-&i2c8 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	*	PCIe x8  Slot3
-	*	PCIe x16 slot4
-	*	PCIe x8  slot5
-	*	I2C BMC RISER PCA9554
-	*	BMC SCL/SDA PCA9554
-	*	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	/* pca9545 Riser ->
-	* 	PCIe x8  Slot8
-	* 	PCIe x16 slot9
-	* 	PCIe x8  slot10
-	* 	I2C BMC RISER PCA9554
-	* 	BMC SCL/SDA PCA9554
-	* 	PCA9554
-	*/
-
-	/* pca9545 ->
-	*	PCIe x16 Slot1
-	*	PCIe x8  slot2
-	*	PEX8748
-	*/
-
-	pca9545riser@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	pca9545@71 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x71>;
-
-		i2c-mux-idle-disconnect;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	/* TPM */
-	/* RTC RX8900CE */
-	/* FPGA for power sequence */
-	/* TMP275A */
-	/* TMP275A */
-	/* EMC1462 */
-
-	tpm@57 {
-		compatible = "infineon,slb9645tt";
-		reg = <0x57>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	/* chip emc1462 use emc1403 driver */
-	emc1403@4c {
-		compatible = "smsc,emc1403";
-		reg = <0x4c>;
-	};
-
-};
-
-&i2c12 {
-	status = "okay";
-
-	/* pca9545 ->
-	*	SAS BP1
-	*	SAS BP2
-	*	NVMe BP
-	*	M.2 riser
-	*/
-
-	pca9545@70 {
-		compatible = "nxp,pca9545";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			tmp275@48 {
-				compatible = "ti,tmp275";
-				reg = <0x48>;
-			};
-		};
-
-	};
-
-};
-
-&i2c13 {
-	status = "okay";
-
-	/* pca9548 ->
-	*	NVMe BP
-	*	NVMe HDD17 to 24
-	*/
-
-	pca9548@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-	};
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&adc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_adc0_default
-			&pinctrl_adc1_default
-			&pinctrl_adc2_default
-			&pinctrl_adc3_default
-			&pinctrl_adc4_default
-			&pinctrl_adc5_default
-			&pinctrl_adc6_default
-			&pinctrl_adc7_default
-			&pinctrl_adc8_default
-			&pinctrl_adc9_default
-			&pinctrl_adc10_default
-			&pinctrl_adc11_default
-			&pinctrl_adc12_default
-			&pinctrl_adc13_default
-			&pinctrl_adc14_default
-			&pinctrl_adc15_default>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-#include "ibm-power9-dual.dtsi"
-
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
deleted file mode 100644
index 9628ecb879cf..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ /dev/null
@@ -1,320 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-
-/ {
-	model = "Romulus BMC";
-	compatible = "ibm,romulus-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vga_memory: framebuffer@9f000000 {
-			no-map;
-			reg = <0x9f000000 0x01000000>; /* 16M */
-		};
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		coldfire_memory: codefire_memory@9ef00000 {
-			reg = <0x9ef00000 0x00100000>;
-			no-map;
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-
-		video_engine_memory: jpegbuffer {
-			size = <0x02000000>;	/* 32M */
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fault {
-			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		identify {
-			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-		};
-
-		power {
-			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		memory-region = <&coldfire_memory>;
-		aspeed,sram = <&sram>;
-		aspeed,cvic = <&cvic>;
-
-		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		id-button {
-			label = "id-button";
-			gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Q, 7)>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-};
-
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-#include "openbmc-flash-layout.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-	};
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&mac0 {
-	status = "okay";
-
-	use-ncsi;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	/* PCIe slot 1 (x8) */
-	status = "okay";
-};
-
-&i2c7 {
-	/* PCIe slot 2 (x16) */
-	status = "okay";
-};
-
-&i2c8 {
-	/* PCIe slot 3 (x16) */
-	status = "okay";
-};
-
-&i2c9 {
-	/* PCIe slot 4 (x16) */
-	status = "okay";
-};
-
-&i2c10 {
-	/* PCIe slot 5 (x8) */
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-
-	w83773g@4c {
-		compatible = "nuvoton,w83773g";
-		reg = <0x4c>;
-	};
-};
-
-&gpio {
-	nic_func_mode0 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "nic_func_mode0";
-	};
-	nic_func_mode1 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "nic_func_mode1";
-	};
-	seq_cont {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "seq_cont";
-	};
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&pwm_tacho {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
-
-	fan@0 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
-	};
-
-	fan@1 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
-	};
-
-	fan@2 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
-	};
-
-	fan@3 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
-	};
-
-	fan@4 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
-	};
-
-	fan@5 {
-		reg = <0x00>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
-	};
-
-	fan@6 {
-		reg = <0x01>;
-		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
-	};
-};
-
-&ibt {
-	status = "okay";
-};
-
-&vhub {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&video {
-	status = "okay";
-	memory-region = <&video_engine_memory>;
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
deleted file mode 100644
index f67fef1ac5e1..000000000000
--- a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
+++ /dev/null
@@ -1,977 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/dts-v1/;
-#include "aspeed-g5.dtsi"
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include <dt-bindings/leds/leds-pca955x.h>
-
-/ {
-	model = "Swift BMC";
-	compatible = "ibm,swift-bmc", "aspeed,ast2500";
-
-	chosen {
-		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
-	};
-
-	memory@80000000 {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		flash_memory: region@98000000 {
-			no-map;
-			reg = <0x98000000 0x04000000>; /* 64M */
-		};
-
-		gfx_memory: framebuffer {
-			size = <0x01000000>;
-			alignment = <0x01000000>;
-			compatible = "shared-dma-pool";
-			reusable;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		air-water {
-			label = "air-water";
-			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(B, 5)>;
-		};
-
-		checkstop {
-			label = "checkstop";
-			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(J, 2)>;
-		};
-
-		ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(R, 7)>;
-		};
-
-		ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(N, 0)>;
-		};
-
-		oppanel-presence {
-			label = "oppanel-presence";
-			gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(A, 7)>;
-		};
-
-		opencapi-riser-presence {
-			label = "opencapi-riser-presence";
-			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(I, 0)>;
-		};
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 12>;
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <1000>;
-
-		scm0-presence {
-			label = "scm0-presence";
-			gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		scm1-presence {
-			label = "scm1-presence";
-			gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		cpu0vrm-presence {
-			label = "cpu0vrm-presence";
-			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
-			linux,code = <12>;
-		};
-
-		cpu1vrm-presence {
-			label = "cpu1vrm-presence";
-			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
-			linux,code = <13>;
-		};
-
-		fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-		};
-
-		fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
-		};
-
-		fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
-			linux,code = <8>;
-		};
-
-		fanboost-presence {
-			label = "fanboost-presence";
-			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
-			linux,code = <9>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		fan0 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
-		};
-
-		fan1 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
-		};
-
-		fan2 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
-		};
-
-		fan3 {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
-		};
-
-		fanboost {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
-		};
-
-		front-fault {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
-		};
-
-		front-power {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
-		};
-
-		front-id {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
-		};
-
-		rear-fault {
-			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-id {
-			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
-		#address-cells = <2>;
-		#size-cells = <0>;
-		no-gpio-delays;
-
-		clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
-		data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-		mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
-		enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
-		trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
-	};
-
-	iio-hwmon-dps310 {
-		compatible = "iio-hwmon";
-		io-channels = <&dps 0>;
-	};
-
-};
-
-&fmc {
-	status = "okay";
-
-	flash@0 {
-		status = "okay";
-		label = "bmc";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x7F80000>;
-				label = "obmc-ubi";
-			};
-		};
-	};
-
-	flash@1 {
-		status = "okay";
-		label = "alt-bmc";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-		partitions {
-			#address-cells = < 1 >;
-			#size-cells = < 1 >;
-			compatible = "fixed-partitions";
-			u-boot@0 {
-				reg = < 0 0x60000 >;
-				label = "alt-u-boot";
-			};
-			u-boot-env@60000 {
-				reg = < 0x60000 0x20000 >;
-				label = "alt-u-boot-env";
-			};
-			obmc-ubi@80000 {
-				reg = < 0x80000 0x7F80000>;
-				label = "alt-obmc-ubi";
-			};
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		label = "pnor";
-		m25p,fast-read;
-		spi-max-frequency = <100000000>;
-	};
-};
-
-&uart1 {
-	/* Rear RS-232 connector */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd1_default
-			&pinctrl_rxd1_default
-			&pinctrl_nrts1_default
-			&pinctrl_ndtr1_default
-			&pinctrl_ndsr1_default
-			&pinctrl_ncts1_default
-			&pinctrl_ndcd1_default
-			&pinctrl_nri1_default>;
-};
-
-&uart2 {
-	/* APSS */
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&lpc_ctrl {
-	status = "okay";
-	memory-region = <&flash_memory>;
-	flash = <&spi1>;
-};
-
-&mac0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rmii1_default>;
-	use-ncsi;
-};
-
-&i2c2 {
-	status = "okay";
-
-	/* MUX ->
-	 *    Samtec 1
-	 *    Samtec 2
-	 */
-};
-
-&i2c3 {
-	status = "okay";
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@4 {
-			compatible = "pmbus-fan";
-			reg = <4>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-	};
-
-	pca0: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps2";
-		reg = <0x68>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps2";
-		reg = <0x69>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	si7021a20@20 {
-		compatible = "si,si7021a20";
-		reg = <0x20>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	pca1: pca9551@60 {
-		compatible = "nxp,pca9551";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
-			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
-			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
-			"P9_SCM0_PRES",	"P9_SCM1_PRES",
-			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
-			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
-			"PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
-			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	ucd90160@64 {
-		compatible = "ti,ucd90160";
-		reg = <0x64>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	pca2: pca9539@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	pca3: pca9539@74 {
-		compatible = "nxp,pca9539";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-};
-
-&i2c11 {
-	/* MUX
-	 *   -> PCIe Slot 0
-	 *   -> PCIe Slot 1
-	 *   -> PCIe Slot 2
-	 *   -> PCIe Slot 3
-	 */
-	status = "okay";
-};
-
-&i2c12 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&vuart {
-	status = "okay";
-};
-
-&gfx {
-	status = "okay";
-	memory-region = <&gfx_memory>;
-};
-
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&wdt1 {
-	aspeed,reset-type = "none";
-	aspeed,external-signal;
-	aspeed,ext-push-pull;
-	aspeed,ext-active-high;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdtrst1_default>;
-};
-
-&wdt2 {
-	aspeed,alt-boot;
-};
-
-&ibt {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&sdmmc {
-       status = "okay";
-};
-
-&sdhci1 {
-       status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_sd2_default>;
-};
-
-#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
deleted file mode 100644
index 3a1422f7c49c..000000000000
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright 2019 IBM Corp.
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/ast2600-clock.h>
-
-/ {
-	model = "Aspeed BMC";
-	compatible = "aspeed,ast2600";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial4 = &uart5;
-	};
-
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "aspeed,ast2600-smp";
-
-		cpu@f00 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0xf00>;
-		};
-
-		cpu@f01 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0xf01>;
-		};
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-		clocks = <&syscon ASPEED_CLK_HPLL>;
-		arm,cpu-registers-not-fw-configured;
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges;
-
-		gic: interrupt-controller@40461000 {
-			compatible = "arm,cortex-a7-gic";
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			reg = <0x40461000 0x1000>,
-			    <0x40462000 0x1000>,
-			    <0x40464000 0x2000>,
-			    <0x40466000 0x2000>;
-			};
-
-		mdio0: mdio@1e650000 {
-			compatible = "aspeed,ast2600-mdio";
-			reg = <0x1e650000 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mdio1: mdio@1e650008 {
-			compatible = "aspeed,ast2600-mdio";
-			reg = <0x1e650008 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mdio2: mdio@1e650010 {
-			compatible = "aspeed,ast2600-mdio";
-			reg = <0x1e650010 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mdio3: mdio@1e650018 {
-			compatible = "aspeed,ast2600-mdio";
-			reg = <0x1e650018 0x8>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mac0: ftgmac@1e660000 {
-			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
-			reg = <0x1e660000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
-			status = "disabled";
-		};
-
-		mac1: ftgmac@1e680000 {
-			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
-			reg = <0x1e680000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
-			status = "disabled";
-		};
-
-		mac2: ftgmac@1e670000 {
-			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
-			reg = <0x1e670000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
-			status = "disabled";
-		};
-
-		mac3: ftgmac@1e690000 {
-			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
-			reg = <0x1e690000 0x180>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
-			status = "disabled";
-		};
-
-		apb {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			syscon: syscon@1e6e2000 {
-				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
-				reg = <0x1e6e2000 0x1000>;
-				ranges = <0 0x1e6e2000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				#clock-cells = <1>;
-				#reset-cells = <1>;
-
-				pinctrl: pinctrl {
-					compatible = "aspeed,ast2600-pinctrl";
-				};
-
-				smp-memram@180 {
-					compatible = "aspeed,ast2600-smpmem";
-					reg = <0x180 0x40>;
-				};
-			};
-
-			rng: hwrng@1e6e2524 {
-				compatible = "timeriomem_rng";
-				reg = <0x1e6e2524 0x4>;
-				period = <1>;
-				quality = <100>;
-			};
-
-			rtc: rtc@1e781000 {
-				compatible = "aspeed,ast2600-rtc";
-				reg = <0x1e781000 0x18>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
-			uart5: serial@1e784000 {
-				compatible = "ns16550a";
-				reg = <0x1e784000 0x1000>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
-				no-loopback-test;
-			};
-
-			wdt1: watchdog@1e785000 {
-				compatible = "aspeed,ast2600-wdt";
-				reg = <0x1e785000 0x40>;
-			};
-
-			wdt2: watchdog@1e785040 {
-				compatible = "aspeed,ast2600-wdt";
-				reg = <0x1e785040 0x40>;
-				status = "disabled";
-			};
-
-			wdt3: watchdog@1e785080 {
-				compatible = "aspeed,ast2600-wdt";
-				reg = <0x1e785080 0x40>;
-				status = "disabled";
-			};
-
-			wdt4: watchdog@1e7850C0 {
-				compatible = "aspeed,ast2600-wdt";
-				reg = <0x1e7850C0 0x40>;
-				status = "disabled";
-			};
-
-			sdc: sdc@1e740000 {
-				compatible = "aspeed,ast2600-sd-controller";
-				reg = <0x1e740000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e740000 0x10000>;
-				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
-				status = "disabled";
-
-				sdhci0: sdhci@1e740100 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
-					reg = <0x100 0x100>;
-					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-					sdhci,auto-cmd12;
-					clocks = <&syscon ASPEED_CLK_SDIO>;
-					status = "disabled";
-				};
-
-				sdhci1: sdhci@1e740200 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
-					reg = <0x200 0x100>;
-					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-					sdhci,auto-cmd12;
-					clocks = <&syscon ASPEED_CLK_SDIO>;
-					status = "disabled";
-				};
-			};
-
-			emmc: sdc@1e750000 {
-				compatible = "aspeed,ast2600-sd-controller";
-				reg = <0x1e750000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1e750000 0x10000>;
-				clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
-				status = "disabled";
-
-				sdhci@1e750100 {
-					compatible = "aspeed,ast2600-sdhci";
-					reg = <0x100 0x100>;
-					sdhci,auto-cmd12;
-					interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&syscon ASPEED_CLK_EMMC>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_emmc_default>;
-				};
-			};
-		};
-	};
-};
-
-#include "aspeed-g6-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
new file mode 100644
index 000000000000..0f0b5b707654
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ASPEED) += \
+	aspeed-ast2500-evb.dtb \
+	aspeed-ast2600-evb-a1.dtb \
+	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-daytonax.dtb \
+	aspeed-bmc-amd-ethanolx.dtb \
+	aspeed-bmc-ampere-mtjade.dtb \
+	aspeed-bmc-ampere-mtjefferson.dtb \
+	aspeed-bmc-ampere-mtmitchell.dtb \
+	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-asrock-e3c246d4i.dtb \
+	aspeed-bmc-asrock-e3c256d4i.dtb \
+	aspeed-bmc-asrock-romed8hm3.dtb \
+	aspeed-bmc-asrock-spc621d8hm3.dtb \
+	aspeed-bmc-asrock-x570d4u.dtb \
+	aspeed-bmc-asus-x4tf.dtb \
+	aspeed-bmc-bytedance-g220a.dtb \
+	aspeed-bmc-delta-ahe50dc.dtb \
+	aspeed-bmc-facebook-bletchley.dtb \
+	aspeed-bmc-facebook-catalina.dtb \
+	aspeed-bmc-facebook-clemente.dtb \
+	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-darwin.dtb \
+	aspeed-bmc-facebook-elbert.dtb \
+	aspeed-bmc-facebook-fuji-data64.dtb \
+	aspeed-bmc-facebook-fuji.dtb \
+	aspeed-bmc-facebook-galaxy100.dtb \
+	aspeed-bmc-facebook-greatlakes.dtb \
+	aspeed-bmc-facebook-harma.dtb \
+	aspeed-bmc-facebook-minerva.dtb \
+	aspeed-bmc-facebook-minipack.dtb \
+	aspeed-bmc-facebook-santabarbara.dtb \
+	aspeed-bmc-facebook-tiogapass.dtb \
+	aspeed-bmc-facebook-wedge40.dtb \
+	aspeed-bmc-facebook-wedge100.dtb \
+	aspeed-bmc-facebook-wedge400-data64.dtb \
+	aspeed-bmc-facebook-wedge400.dtb \
+	aspeed-bmc-facebook-yamp.dtb \
+	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-facebook-yosemite4.dtb \
+	aspeed-bmc-ibm-blueridge.dtb \
+	aspeed-bmc-ibm-bonnell.dtb \
+	aspeed-bmc-ibm-everest.dtb \
+	aspeed-bmc-ibm-fuji.dtb \
+	aspeed-bmc-ibm-rainier.dtb \
+	aspeed-bmc-ibm-rainier-1s4u.dtb \
+	aspeed-bmc-ibm-rainier-4u.dtb \
+	aspeed-bmc-ibm-sbp1.dtb \
+	aspeed-bmc-ibm-system1.dtb \
+	aspeed-bmc-intel-s2600wf.dtb \
+	aspeed-bmc-inspur-fp5280g2.dtb \
+	aspeed-bmc-inspur-nf5280m6.dtb \
+	aspeed-bmc-inspur-on5263m5.dtb \
+	aspeed-bmc-lenovo-hr630.dtb \
+	aspeed-bmc-lenovo-hr855xg2.dtb \
+	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-nvidia-gb200nvl-bmc.dtb \
+	aspeed-bmc-opp-lanyang.dtb \
+	aspeed-bmc-opp-mowgli.dtb \
+	aspeed-bmc-opp-nicole.dtb \
+	aspeed-bmc-opp-palmetto.dtb \
+	aspeed-bmc-opp-romulus.dtb \
+	aspeed-bmc-opp-tacoma.dtb \
+	aspeed-bmc-opp-vesnin.dtb \
+	aspeed-bmc-opp-witherspoon.dtb \
+	aspeed-bmc-opp-zaius.dtb \
+	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-qcom-dc-scm-v1.dtb \
+	aspeed-bmc-quanta-q71l.dtb \
+	aspeed-bmc-quanta-s6q.dtb \
+	aspeed-bmc-supermicro-x11spi.dtb \
+	aspeed-bmc-inventec-starscream.dtb \
+	aspeed-bmc-inventec-transformers.dtb \
+	aspeed-bmc-tyan-s7106.dtb \
+	aspeed-bmc-tyan-s8036.dtb \
+	aspeed-bmc-ufispace-ncplite.dtb \
+	aspeed-bmc-vegman-n110.dtb \
+	aspeed-bmc-vegman-rx20.dtb \
+	aspeed-bmc-vegman-sx20.dtb
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
index c9d88c90135e..a497dd135491 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2500-evb.dts
@@ -5,7 +5,7 @@
 
 / {
 	model = "AST2500 EVB";
-	compatible = "aspeed,ast2500";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
 
 	aliases {
 		serial4 = &uart5;
@@ -13,7 +13,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -40,6 +40,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
+		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout.dtsi"
 	};
 };
@@ -50,6 +51,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "pnor";
+		spi-max-frequency = <100000000>;
 	};
 };
 
@@ -127,3 +129,7 @@
      status = "okay";
      memory-region = <&gfx_memory>;
 };
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
new file mode 100644
index 000000000000..f34a2b1ec2f0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb-a1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+
+#include "aspeed-ast2600-evb.dts"
+
+/ {
+	model = "AST2600 A1 EVB";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600";
+
+	/delete-node/regulator-vcc-sdhci0;
+	/delete-node/regulator-vcc-sdhci1;
+	/delete-node/regulator-vccq-sdhci0;
+	/delete-node/regulator-vccq-sdhci1;
+};
+
+/delete-node/ &sdc;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
new file mode 100644
index 000000000000..de83c0eb1d6e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-ast2600-evb.dts
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "AST2600 EVB";
+	compatible = "aspeed,ast2600-evb", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	vcc_sdhci0: regulator-vcc-sdhci0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci0: regulator-vccq-sdhci0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
+
+	vcc_sdhci1: regulator-vcc-sdhci1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci1: regulator-vccq-sdhci1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+
+&mac1 {
+	status = "okay";
+
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethphy1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default>;
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	clk-phase-mmc-hs200 = <9>, <225>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	temp@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&fsim0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdc {
+	status = "okay";
+};
+
+/*
+ * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be
+ * toggled by GPIO pins.
+ * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the
+ * power load switch that provides 3.3v to sdhci0 vdd, GPIOV1 is connected to
+ * a 1.8v and a 3.3v power load switch that provides signal voltage to
+ * sdhci0 bus.
+ * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled.
+ * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal
+ * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled,
+ * sdhci0 signal voltage becomes 1.8v.
+ * AST2600-A2 EVB also supports toggling signal voltage for sdhci1.
+ * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3
+ * as power-switch-gpio.
+ */
+&sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci0>;
+	vqmmc-supply = <&vccq_sdhci0>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&sdhci1 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci1>;
+	vqmmc-supply = <&vccq_sdhci1>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&vhub {
+	status = "okay";
+	pinctrl-names = "default";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
new file mode 100644
index 000000000000..64bb9bf92de2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD DaytonaX BMC";
+	compatible = "amd,daytonax-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>,
+			<&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		&pinctrl_rxd1_default
+		&pinctrl_nrts1_default
+		&pinctrl_ndtr1_default
+		&pinctrl_ndsr1_default
+		&pinctrl_ncts1_default
+		&pinctrl_ndcd1_default
+		&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","led-fault","led-identify","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"id-button","","","","","","","",
+	/*D0-D7*/	"","","ASSERT_BMC_READY","","","","","",
+	/*E0-E7*/	"reset-button","reset-control","power-button","power-control","",
+			"power-good","power-ok","",
+	/*F0-F7*/	"","","","","","","BATTERY_DETECT","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"FM_BMC_READ_SPD_TEMP","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default
+		&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
new file mode 100644
index 000000000000..6bded774c457
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-amd-ethanolx.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 AMD Inc.
+// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD EthanolX BMC";
+	compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_nrts1_default
+		     &pinctrl_ncts1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","FAULT_LED","CHASSIS_ID_LED","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","",
+	/*D0-D7*/	"HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S",
+			"JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD",
+	/*E0-E7*/	"","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN",
+			"MON_P0_PWR_GOOD","MON_PWROK","MON_RESET",
+	/*F0-F7*/	"MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP",
+			"MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","",
+	/*G0-G7*/	"BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0",
+			"P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","",
+	/*H0-H7*/	"BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3",
+			"PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN",
+			"ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT",
+			"ASSERT_CLR_CMOS","ASSERT_BMC_READY",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT",
+			"P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT",
+			"P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT",
+			"P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","SENSOR THERM","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+//APML for P0
+&i2c0 {
+	status = "okay";
+};
+
+//APML for P1
+&i2c1 {
+	status = "okay";
+};
+
+//FPGA
+&i2c2 {
+	status = "okay";
+};
+
+//24LC128 EEPROM
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+//P0 Power regulators
+&i2c4 {
+	status = "okay";
+};
+
+//P1 Power regulators
+&i2c5 {
+	status = "okay";
+};
+
+//P0/P1 Thermal diode
+&i2c6 {
+	status = "okay";
+};
+
+// Thermal Sensors
+&i2c7 {
+	status = "okay";
+
+	lm75a@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	lm75a@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+	};
+
+	lm75a@4a {
+		compatible = "national,lm75a";
+		reg = <0x4a>;
+	};
+
+	lm75a@4b {
+		compatible = "national,lm75a";
+		reg = <0x4b>;
+	};
+
+	lm75a@4c {
+		compatible = "national,lm75a";
+		reg = <0x4c>;
+	};
+
+	lm75a@4d {
+		compatible = "national,lm75a";
+		reg = <0x4d>;
+	};
+
+	lm75a@4e {
+		compatible = "national,lm75a";
+		reg = <0x4e>;
+	};
+
+	lm75a@4f {
+		compatible = "national,lm75a";
+		reg = <0x4f>;
+	};
+};
+
+//BMC I2C
+&i2c8 {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x60>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x62>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x97DE>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	//Enable lpc clock
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
new file mode 100644
index 000000000000..263702599767
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjade.dts
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jade BMC";
+	compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 *  i2c bus 50-57 assigned to NVMe slot 0-7
+		 */
+		i2c50 = &nvmeslot_0;
+		i2c51 = &nvmeslot_1;
+		i2c52 = &nvmeslot_2;
+		i2c53 = &nvmeslot_3;
+		i2c54 = &nvmeslot_4;
+		i2c55 = &nvmeslot_5;
+		i2c56 = &nvmeslot_6;
+		i2c57 = &nvmeslot_7;
+
+		/*
+		 *  i2c bus 60-67 assigned to NVMe slot 8-15
+		 */
+		i2c60 = &nvmeslot_8;
+		i2c61 = &nvmeslot_9;
+		i2c62 = &nvmeslot_10;
+		i2c63 = &nvmeslot_11;
+		i2c64 = &nvmeslot_12;
+		i2c65 = &nvmeslot_13;
+		i2c66 = &nvmeslot_14;
+		i2c67 = &nvmeslot_15;
+
+		/*
+		 *  i2c bus 70-77 assigned to NVMe slot 16-23
+		 */
+		i2c70 = &nvmeslot_16;
+		i2c71 = &nvmeslot_17;
+		i2c72 = &nvmeslot_18;
+		i2c73 = &nvmeslot_19;
+		i2c74 = &nvmeslot_20;
+		i2c75 = &nvmeslot_21;
+		i2c76 = &nvmeslot_22;
+		i2c77 = &nvmeslot_23;
+
+		/*
+		 *  i2c bus 80-81 assigned to NVMe M2 slot 0-1
+		 */
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+
+		/*
+		 *  i2c bus 82 assigned to OCP slot
+		 */
+		i2c82 = &ocpslot;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpioA0mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0mux 0>, <&adc0mux 1>,
+			<&adc1mux 0>, <&adc1mux 1>,
+			<&adc2mux 0>, <&adc2mux 1>,
+			<&adc3mux 0>, <&adc3mux 1>,
+			<&adc4mux 0>, <&adc4mux 1>,
+			<&adc5mux 0>, <&adc5mux 1>,
+			<&adc6mux 0>, <&adc6mux 1>,
+			<&adc7mux 0>, <&adc7mux 1>,
+			<&adc8mux 0>, <&adc8mux 1>,
+			<&adc9mux 0>, <&adc9mux 1>,
+			<&adc10mux 0>, <&adc10mux 1>,
+			<&adc11mux 0>, <&adc11mux 1>,
+			<&adc12mux 0>, <&adc12mux 1>,
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		/* spi-max-frequency = <50000000>; */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		/* spi-max-frequency = <100000000>; */
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			uefi@400000 {
+				reg = <0x400000 0x1C00000>;
+				label = "pnor-uefi";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			 &pinctrl_rxd1_default
+			 &pinctrl_ncts1_default
+			 &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			 &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			 &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+			 &pinctrl_rxd4_default>;
+};
+
+/* The BMC's uart */
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	smpro@4f {
+		compatible = "ampere,smpro";
+		reg = <0x4f>;
+	};
+	smpro@4e {
+		compatible = "ampere,smpro";
+		reg = <0x4e>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	inlet_mem2: tmp175@28 {
+		compatible = "ti,tmp175";
+		reg = <0x28>;
+	};
+
+	inlet_cpu: tmp175@29 {
+		compatible = "ti,tmp175";
+		reg = <0x29>;
+	};
+
+	inlet_mem1: tmp175@2a {
+		compatible = "ti,tmp175";
+		reg = <0x2a>;
+	};
+
+	outlet_cpu: tmp175@2b {
+		compatible = "ti,tmp175";
+		reg = <0x2b>;
+	};
+
+	outlet1: tmp175@2c {
+		compatible = "ti,tmp175";
+		reg = <0x2c>;
+	};
+
+	outlet2: tmp175@2d {
+		compatible = "ti,tmp175";
+		reg = <0x2d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		ocpslot: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ocpslot_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		nvmeslot_0_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8_15: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		nvmeslot_16_23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+
+		nvme_m2_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		nvme_m2_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+	};
+};
+
+&nvmeslot_0_7 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+
+	};
+};
+
+&nvmeslot_8_15 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_12: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_13: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_14: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_15: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&nvmeslot_16_23 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	adm1278@10 {
+		compatible = "adi,adm1278";
+		reg = <0x10>;
+	};
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default
+			&pinctrl_pwm4_default &pinctrl_pwm5_default
+			&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@1 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@5 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@6 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@7 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@8 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@9 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@10 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@11 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","host0-special-boot","","","","",
+	/*B0-B7*/	"i2c-backup-sel","","","",
+			"power-button","presence-cpu0","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"ps0-pgood","ps1-pgood","power-chassis-control","s0-ddr-save",
+			"power-chassis-good", "s1-ddr-save","","",
+	/*G0-G7*/	"host0-ready","host0-shd-req-n","host0-shd-ack-n",
+			"s0-overtemp-n","","","","",
+	/*H0-H7*/	"uart1-mode1","uart2-mode1","uart3-mode1","uart4-mode1",
+			"ps0-vin-good","ps1-vin-good","","i2c6-reset-n",
+	/*I0-I7*/	"presence-ps0","presence-ps1","s1-special-boot","","","","","",
+	/*J0-J7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","host0-sysreset-n","s0-spi-auth-fail-n","","","",
+	/*M0-M7*/	"","","","","s0-i2c9-alert-n","s1-i2c9-alert-n","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","identify-button","led-identify","",
+	/*R0-R7*/	"","","ext-hightemp-n","","ocp-main-pwren","reset-button","","",
+	/*S0-S7*/	"s0-vr-hot-n","s1-vr-hot-n","","",
+			"rtc-battery-voltage-read-enable","vr-pmbus-sel-n","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","bmc-vga-en-n","","","","",
+	/*Z0-Z7*/	"s0-plimit","s1-fault-alert","s1-fw-boot-ok","s0-rtc-lock","",
+			"s1-sys-auth-failure-n","s1-overtemp-n","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"s1-hightemp-n","s1-plimit","s0-ddr-addr","s1-ddr-addr","","",
+			"","",
+	/*AC0-AC7*/	"sys-pwr-gd","","spi0-program-sel","spi0-backup-sel","bmc-ok",
+			"","presence-cpu1","ocp-pgood";
+
+	i2c4-o-en-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "i2c4-o-en";
+	};
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+	bmc-ready-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AC, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "bmc-ready";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
new file mode 100644
index 000000000000..53b4372f1a08
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
@@ -0,0 +1,622 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2024 Ampere Computing LLC.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jefferson BMC";
+	compatible = "ampere,mtjefferson-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c20 = &i2c4_bus70_chn0;
+		i2c22 = &i2c4_bus70_chn2;
+
+		/*
+		 *  I2C OCP alias port
+		 */
+		i2c30 = &ocpslot;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =   <&adc0 0>, <&adc0 1>, <&adc0 2>,
+				<&adc_i2c_2 0>, <&adc_i2c_2 1>,
+				<&adc_i2c_2 2>, <&adc_i2c_2 3>,
+				<&adc_i2c_2 4>, <&adc_i2c_2 5>,
+				<&adc_i2c_2 6>, <&adc_i2c_2 7>,
+				<&adc_i2c_2 8>, <&adc_i2c_2 9>,
+				<&adc_i2c_2 10>, <&adc_i2c_2 11>,
+				<&adc_i2c_2 12>, <&adc_i2c_2 13>,
+				<&adc_i2c_2 14>, <&adc_i2c_2 15>,
+				<&adc_i2c_0 0>, <&adc_i2c_0 1>,
+				<&adc_i2c_0 2>, <&adc_i2c_0 3>,
+				<&adc_i2c_0 4>, <&adc_i2c_0 5>,
+				<&adc_i2c_0 6>, <&adc_i2c_0 7>,
+				<&adc_i2c_0 8>, <&adc_i2c_0 9>,
+				<&adc_i2c_0 10>, <&adc_i2c_0 11>,
+				<&adc_i2c_0 12>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c256";
+				reg = <0x52>;
+				pagesize = <32>;
+			};
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+			temperature-sensor@4a {
+				compatible = "ti,tmp75";
+				reg = <0x4a>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp464";
+				reg = <0x4b>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				channel@0 {
+					reg = <0x0>;
+					status = "disabled";
+				};
+				channel@1 {
+					reg = <0x1>;
+					status = "disabled";
+				};
+				channel@2 {
+					reg = <0x2>;
+					status = "disabled";
+				};
+				channel@3 {
+					reg = <0x3>;
+					status = "disabled";
+				};
+				channel@4 {
+					reg = <0x4>;
+				};
+			};
+			temperature-sensor@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+			temperature-sensor@28 {
+				compatible = "nuvoton,nct7802";
+				reg = <0x28>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel@1 { /* RTD1 */
+					reg = <1>;
+					sensor-type = "temperature";
+					temperature-mode = "thermistor";
+				};
+			};
+			adc_i2c_0: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			adc_i2c_2: adc@14 {
+				compatible = "lltc,ltc2497";
+				reg = <0x14>;
+				vref-supply = <&voltage_mon_reg>;
+				#io-channel-cells = <1>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+			};
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				ocpslot: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					ocpslot_temp: temperature-sensor@1f {
+						compatible = "ti,tmp421";
+						reg = <0x1f>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						channel@0 {
+							reg = <0x0>;
+							status = "disabled";
+						};
+						channel@1 {
+							reg = <0x1>;
+						};
+					};
+				};
+
+				nvmeslot_0: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_1: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_2: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_3: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	fan-controller@5c {
+		compatible = "onnn,adt7462";
+		reg = <0x5c>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+
+	temperature-sensor@18 {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x18>;
+	};
+
+	temperature-sensor@1a {
+		compatible = "jedec,jc-42.4-temp";
+		reg = <0x1a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"presence-ocp1","presence-ocp2",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","cpu-type-detect","i2c2-reset-n","i2c6-reset-n","i2c5-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","fru-rd-complete",
+			"chassis-id-sel",
+	/*C0-C7*/	"s0-vrd-fault-n","","bmc-debug-mode","","cpld-3v3-irq-n","","vrd-sel",
+			"spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","","","",
+	/*E0-E7*/	"eth-phy-rst-n","eth-phy-int-n","","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-scout-proc-hot","s0-vr-hot-n","",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","bp-cpld-program-en","led-fp-sta-gr",
+			"led-fp-sta-amb",
+	/*H0-H7*/	"jtag-program-sel","jtag-cmpl2","wd-disable-n","power-chassis-good","","",
+			"","",
+	/*I0-I7*/	"","","","","","","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","reset-button","","","",
+	/*M0-M7*/	"nmi-n","s0-ddr-save","soc-spi-nor-access","presence-cpu0","s0-rtc-lock",
+			"","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","","led-fault","user-mode","jtag-srst-n",
+			"led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify","","spi-nor-access","host0-ready","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","vrd-prg-en-n","","","","host0-special-boot",
+	/*Z0-Z7*/	"","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","s0-soc-pgood","vga-ft-press-n","emmc-rst-n","s01-uart1-sel",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
new file mode 100644
index 000000000000..2b336aa0146d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtmitchell.dts
@@ -0,0 +1,1061 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2022, Ampere Computing LLC
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt.Mitchell BMC";
+	compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial7 = &uart8;
+		serial8 = &uart9;
+
+		/*
+		 * I2C temperature alias port
+		 */
+		i2c20 = &i2c4_bus70_chn0;
+		i2c21 = &i2c4_bus70_chn1;
+		i2c22 = &i2c4_bus70_chn2;
+		i2c23 = &i2c4_bus70_chn3;
+
+		/*
+		 *  i2c bus 30-31 assigned to OCP slot 0-1
+		 */
+		i2c30 = &ocpslot_0;
+		i2c31 = &ocpslot_1;
+
+		/*
+		 *  i2c bus 32-33 assigned to Riser slot 0-1
+		 */
+		i2c32 = &i2c_riser0;
+		i2c33 = &i2c_riser1;
+
+		/*
+		 *  i2c bus 38-39 assigned to FRU on Riser slot 0-1
+		 */
+		i2c38 = &i2c_riser0_chn_0;
+		i2c39 = &i2c_riser1_chn_0;
+
+		/*
+		 *  I2C NVMe alias port
+		 */
+		i2c100 = &backplane_0;
+		i2c48 = &nvmeslot_0;
+		i2c49 = &nvmeslot_1;
+		i2c50 = &nvmeslot_2;
+		i2c51 = &nvmeslot_3;
+		i2c52 = &nvmeslot_4;
+		i2c53 = &nvmeslot_5;
+		i2c54 = &nvmeslot_6;
+		i2c55 = &nvmeslot_7;
+
+		i2c101 = &backplane_1;
+		i2c56 = &nvmeslot_8;
+		i2c57 = &nvmeslot_9;
+		i2c58 = &nvmeslot_10;
+		i2c59 = &nvmeslot_11;
+		i2c60 = &nvmeslot_12;
+		i2c61 = &nvmeslot_13;
+		i2c62 = &nvmeslot_14;
+		i2c63 = &nvmeslot_15;
+
+		i2c102 = &backplane_2;
+		i2c64 = &nvmeslot_16;
+		i2c65 = &nvmeslot_17;
+		i2c66 = &nvmeslot_18;
+		i2c67 = &nvmeslot_19;
+		i2c68 = &nvmeslot_20;
+		i2c69 = &nvmeslot_21;
+		i2c70 = &nvmeslot_22;
+		i2c71 = &nvmeslot_23;
+
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		/*
+		 * Use gpio-leds to configure GPIOW5 (bmc-ready) pin to be reseted when
+		 * watchdog timeout.
+		 */
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(W, 5) (GPIO_ACTIVE_HIGH | GPIO_TRANSITORY)>;
+		};
+
+		led-sw-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-identify {
+			gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fault {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fan-fault {
+			gpios = <&gpio_expander1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-psu-fault {
+			gpios = <&gpio_expander1 1 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpioI5mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc14mux: adc14mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 14>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	adc15mux: adc15mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc_i2c_0 15>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		settle-time-us = <10000>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels =	<&adc0mux 0>, <&adc0mux 1>,
+				<&adc1mux 0>, <&adc1mux 1>,
+				<&adc2mux 0>, <&adc2mux 1>,
+				<&adc3mux 0>, <&adc3mux 1>,
+				<&adc4mux 0>, <&adc4mux 1>,
+				<&adc5mux 0>, <&adc5mux 1>,
+				<&adc6mux 0>, <&adc6mux 1>,
+				<&adc7mux 0>, <&adc7mux 1>,
+				<&adc8mux 0>, <&adc8mux 1>,
+				<&adc9mux 0>, <&adc9mux 1>,
+				<&adc10mux 0>, <&adc10mux 1>,
+				<&adc11mux 0>, <&adc11mux 1>,
+				<&adc12mux 0>, <&adc12mux 1>,
+				<&adc13mux 0>, <&adc13mux 1>,
+				<&adc14mux 0>, <&adc14mux 1>,
+				<&adc15mux 0>, <&adc15mux 1>,
+				<&adc_i2c_1 0>, <&adc_i2c_1 1>,
+				<&adc_i2c_1 2>, <&adc_i2c_1 3>,
+				<&adc_i2c_1 4>, <&adc_i2c_1 5>,
+				<&adc_i2c_1 6>, <&adc_i2c_1 7>,
+				<&adc_i2c_1 8>, <&adc_i2c_1 9>,
+				<&adc_i2c_1 10>, <&adc_i2c_1 11>,
+				<&adc_i2c_1 12>, <&adc_i2c_1 13>,
+				<&adc_i2c_1 14>, <&adc_i2c_1 15>,
+				<&adc0 0>, <&adc0 1>,
+				<&adc0 2>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <1000000>;
+	multi-master;
+	mctp-controller;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc_i2c_0: adc@14 {
+		compatible = "lltc,ltc2497";
+		reg = <0x14>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	adc_i2c_1: adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			outlet_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu1_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			pcie_zone_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu0_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			pcie_zone_temp2: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			outlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			mb_inlet_temp1: temperature-sensor@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+			mb_inlet_temp2: temperature-sensor@4c {
+				compatible = "microchip,emc1413";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		ocpslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ocpslot_0_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		ocpslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			ocpslot_1_temp: temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c_riser0: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				i2c_riser0_chn_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c02";
+						reg = <0x50>;
+						pagesize = <16>;
+					};
+				};
+			};
+		};
+
+		i2c_riser1: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				i2c_riser1_chn_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c02";
+						reg = <0x50>;
+						pagesize = <16>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+	};
+
+	gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+		gpio-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"ext-vref-sel","","presence-hdd-bp5-n","presence-hdd-bp6-n",
+		"","bmc-riser-en-n","bmc-ocp1-en-n","bmc-ocp0-en-n",
+		"","","","",
+		"","","","";
+
+		bmc-ocp0-en-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "bmc-ocp0-en-n";
+		};
+	};
+
+	fan-controller0@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	fan-controller1@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		backplane_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_8: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_9: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_10: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_11: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_12: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_13: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_14: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_15: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		backplane_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_16: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_17: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_18: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_19: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_20: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_21: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_22: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_23: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		backplane_0: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvmeslot_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+				nvmeslot_1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+				nvmeslot_2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+				};
+				nvmeslot_3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+				};
+				nvmeslot_4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x4>;
+				};
+				nvmeslot_5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x5>;
+				};
+				nvmeslot_6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x6>;
+				};
+				nvmeslot_7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x7>;
+				};
+			};
+
+			tmp432@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				nvme_m2_0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x0>;
+				};
+
+				nvme_m2_1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x1>;
+				};
+			};
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@35 {
+		compatible = "ti,tmp175";
+		reg = <0x35>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	gpio_expander1: gpio-expander@22 {
+		compatible = "nxp,pca9535";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"fan-fault","psu-fault",
+			"","",
+			"","",
+			"gpi0","gpi1",
+			"","",
+			"","",
+			"","",
+			"","";
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","","",
+	/*C0-C7*/	"s0-vrd-fault-n","s1-vrd-fault-n","bmc-debug-mode","",
+			"irq-n","","vrd-sel","spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","bmc-ncsi-txen","","",
+	/*E0-E7*/	"","eth-phy-int-n","clk50m-bmc-ncsi","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
+			"s0-vr-hot-n","s1-vr-hot-n",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","","","",
+	/*H0-H7*/	"jtag-program-sel","fpga-program-b","wd-disable-n",
+			"power-chassis-good","","","","",
+	/*I0-I7*/	"","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
+			"s0-rtc-lock","","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","s1-heartbeat","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","",
+			"led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify",
+			"s1-ddr-save","spi-nor-access","host0-ready","presence-cpu1",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","s0-fw-boot-ok","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"ocp-aux-pwren","ocp-main-pwren","ocp-pgood","s1-pcp-pgood",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
+			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
+			"s1-overtemp-n","cpld-s1-spi-auth-fail-n",
+	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
+	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","","","s0-soc-pgood","",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
index 521afbea2c5b..b550a48f48f0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -10,7 +10,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -92,6 +92,9 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
 	use-ncsi;
 };
 
@@ -168,7 +171,7 @@
 				reg = <0x50>;
 			};
 			dps650ab@58 {
-				compatible = "dps650ab";
+				compatible = "delta,dps650ab";
 				reg = <0x58>;
 			};
 		};
@@ -197,18 +200,14 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &gpio {
-	pin_gpio_c7 {
+	pin-gpio-c7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BIOS_SPI_MUX_S";
 	};
-	pin_gpio_d1 {
+	pin-gpio-d1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
new file mode 100644
index 000000000000..3ebd80db06f9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock E3C246D4I BMC";
+	compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			/* BMC_HB_LED_N */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			/* SYSTEM_FAULT_LED_N */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		uid-button {
+			label = "uid-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* thermal sensor, one diode run to a disconnected header */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* FRU EEPROM */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "BMC_MAC1_INTB", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "", "", "", "", "", "IRQ_BMC_PCH_SMI_LPC_N", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "SML0ALERT",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "SKL_CNL_R", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "BMC_CTS1", "BMC_DCD1", "BMC_DSR1", "BMC_RI1",
+			"BMC_DTR1", "BMC_RTS1", "BMC_TXD1", "BMC_RXD1",
+		/*  M */ "BMC_LAN0_DIS_N", "BMC_LAN1_DIS_N", "", "",
+			"", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SBM_PRESENT_1_N", "BMC_SBM_PRESENT_2_N",
+			"BMC_SBM_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST",
+			"", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "PS_PWROK", /* dummy always-high signal */
+			"", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_PCH_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY",
+			"", "", "", "",
+		/* AC */ "LAD0", "LAD1", "LAD2", "LAD3",
+			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
+
+	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
+	bmc-ready-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
new file mode 100644
index 000000000000..8c57a071f488
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/watchdog/aspeed-wdt.h>
+
+/{
+	model = "ASRock E3C256D4I BMC";
+	compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c2mux0ch0;
+		i2c21 = &i2c2mux0ch1;
+		i2c22 = &i2c2mux0ch2;
+		i2c23 = &i2c2mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c2mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	vrm@60 {
+		compatible = "isil,isl69269";
+		reg = <0x60>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	/* FRU eeprom */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&wdt1 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&wdt2 {
+	aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default /* CPU */
+		&pinctrl_pwm2_default      /* rear */
+		&pinctrl_pwm4_default>;    /* front */
+
+	/* CPU */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* rear */
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	/* front */
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "NMI_BTN_N", "BMC_NMI", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"", "", "", "",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", "", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* VCCSA */
+		&pinctrl_adc4_default	   /* VCCM */
+		&pinctrl_adc5_default	   /* V10M */
+		&pinctrl_adc6_default	   /* VCCIO */
+		&pinctrl_adc7_default	   /* VCCGT */
+		&pinctrl_adc8_default	   /* VPPM */
+		&pinctrl_adc9_default	   /* BAT */
+		&pinctrl_adc10_default	   /* 3V */
+		&pinctrl_adc11_default	   /* 5V */
+		&pinctrl_adc12_default	   /* 12V */
+		&pinctrl_adc13_default	   /* GND */
+		&pinctrl_adc14_default	   /* GND */
+		&pinctrl_adc15_default>;   /* GND */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
new file mode 100644
index 000000000000..e306655ce4a3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock ROMED8HM3 BMC v1.00";
+	compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* inlet temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* IPB temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* IPB PMIC */
+	lm25066@40 {
+		compatible = "ti,lm25066";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	/* 12VSB PMIC */
+	lm25066@41 {
+		compatible = "ti,lm25066";
+		reg = <0x41>;
+		shunt-resistor-micro-ohms = <10000>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Baseboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default>;
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "POST_COMPLETE_N", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "PSU_FAN_FAIL_N",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
+			"PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
+		/*  H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
+			"FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
+			"MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
+			"BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
+		/*  Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
+			"", "", "", "",
+		/* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
new file mode 100644
index 000000000000..c4097e4f2ca4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/{
+	model = "ASRock SPC621D8HM3 BMC";
+	compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+
+		i2c20 = &i2c1mux0ch0;
+		i2c21 = &i2c1mux0ch1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC heartbeat */
+		led-0 {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			linux,default-trigger = "timer";
+		};
+
+		/* system fault */
+		led-1 {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* hardware monitor/thermal sensor */
+	temperature-sensor@29 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x29>;
+	};
+
+	/* motherboard temp sensor (TMP1, near BMC) */
+	temperature-sensor@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* motherboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+		};
+	};
+
+	/* M.2 slot smbus mux */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N",
+			"BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN",
+			"", "", "", "",
+		/*  B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "",
+			"", "", "", "GPIO_RST",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N",
+			"FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N",
+			"NMI_BTN_N", "BMC_NMI",
+			"", "",
+		/*  E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "",
+		/*  F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N",
+			"FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN",
+			"FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN",
+			"FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N",
+		/*  G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL",
+			"BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N",
+		/*  H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "",
+			"FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N",
+			"IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N",
+			"", "", "", "",
+		/*  J */ "", "", "", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N",
+			"FM_CPU1_PROCHOT_BMC_LVC3_N", "",
+			"FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N",
+		/*  R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N",
+			"", "FM_BMC_PCH_SCI_LPC_N", "", "",
+		/*  S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N",
+			"FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3",
+			 "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD",
+			"", "", "", "",
+		/*  Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N",
+			"FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK",
+			"", "IRQ_SML0_ALERT_MUX_N",
+			"IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N",
+		/* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK",
+			"ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+		&pinctrl_adc1_default	   /* 5VSB */
+		&pinctrl_adc2_default	   /* CPU1 */
+		&pinctrl_adc3_default	   /* NC */
+		&pinctrl_adc4_default	   /* VCCMABCD */
+		&pinctrl_adc5_default	   /* VCCMEFGH */
+		&pinctrl_adc6_default	   /* NC */
+		&pinctrl_adc7_default	   /* NC */
+		&pinctrl_adc8_default	   /* PVNN_PCH */
+		&pinctrl_adc9_default	   /* 1P05PCH */
+		&pinctrl_adc10_default	   /* 1P8PCH */
+		&pinctrl_adc11_default	   /* BAT */
+		&pinctrl_adc12_default	   /* 3V */
+		&pinctrl_adc13_default	   /* 5V */
+		&pinctrl_adc14_default	   /* 12V */
+		&pinctrl_adc15_default>;   /* GND */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
new file mode 100644
index 000000000000..e61a6cb43438
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Asrock Rack X570D4U BMC";
+	compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c40 = &i2c4mux0ch0;
+		i2c41 = &i2c4mux0ch1;
+		i2c42 = &i2c4mux0ch2;
+		i2c43 = &i2c4mux0ch3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pci_memory: region@9a000000 {
+			no-map;
+			reg = <0x9a000000 0x00010000>; /* 64K */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02800000>;	/* 40M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* led-heartbeat-n */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "timer";
+		};
+
+		led-1 {
+			/* led-fault-n */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_FAULT;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*  A */ "input-locatorled-n", "", "", "", "", "", "", "",
+	/*  B */ "input-bios-post-cmplt-n", "", "", "", "", "", "", "",
+	/*  C */ "", "", "", "", "", "", "control-locatorbutton-n", "",
+	/*  D */ "button-power-n", "control-power-n", "button-reset-n",
+		 "control-reset-n", "", "", "", "",
+	/*  E */ "", "", "", "", "", "", "", "",
+	/*  F */ "", "", "", "", "", "", "", "",
+	/*  G */ "output-hwm-vbat-enable", "input-id0-n", "input-id1-n",
+		 "input-id2-n", "input-aux-smb-alert-n", "",
+		 "input-psu-smb-alert-n", "",
+	/*  H */ "", "", "", "", "input-mfg-mode-n", "",
+		 "led-heartbeat-n", "input-case-open-n",
+	/*  I */ "", "", "", "", "", "", "", "",
+	/*  J */ "output-bmc-ready-n", "", "", "", "", "", "", "",
+	/*  K */ "", "", "", "", "", "", "", "",
+	/*  L */ "", "", "", "", "", "", "", "",
+	/*  M */ "", "", "", "", "", "", "", "",
+	/*  N */ "", "", "", "", "", "", "", "",
+	/*  O */ "", "", "", "", "", "", "", "",
+	/*  P */ "", "", "", "", "", "", "", "",
+	/*  Q */ "", "", "", "", "input-bmc-smb-present-n", "", "",
+		 "input-pcie-wake-n",
+	/*  R */ "", "", "", "", "", "", "", "",
+	/*  S */ "input-bmc-pchhot-n", "", "", "", "", "", "", "",
+	/*  T */ "", "", "", "", "", "", "", "",
+	/*  U */ "", "", "", "", "", "", "", "",
+	/*  V */ "", "", "", "", "", "", "", "",
+	/*  W */ "", "", "", "", "", "", "", "",
+	/*  X */ "", "", "", "", "", "", "", "",
+	/*  Y */ "input-sleep-s3-n", "input-sleep-s5-n", "", "", "", "",
+		 "", "",
+	/*  Z */ "", "", "led-fault-n", "output-bmc-throttle-n", "", "",
+		 "", "",
+	/* AA */ "input-cpu1-thermtrip-latch-n", "",
+		 "input-cpu1-prochot-n", "", "", "", "", "",
+	/* AB */ "", "input-power-good", "", "", "", "", "", "",
+	/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <10000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
+	use-ncsi;
+
+	nvmem-cells = <&eth1_macaddress>;
+	nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+	/* SMBus on auxiliary panel header (AUX_PANEL1) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Hardware monitoring SMBus */
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	/* PSU SMBus (PSU_SMB1) */
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c4mux0ch0: i2c@0 {
+			/* SMBus on PCI express 16x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c4mux0ch1: i2c@1 {
+			/* SMBus on PCI express 8x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c4mux0ch2: i2c@2 {
+			/* Unknown */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c4mux0ch3: i2c@3 {
+			/* SMBus on PCI express 1x slot */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	/* SMBus on BMC connector (BMC_SMB_1) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* FRU and SPD EEPROM SMBus */
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
+
+			eth1_macaddress: macaddress@3f88 {
+				reg = <0x3f88 6>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	/* SMBus on intelligent platform management bus header (IPMB_1) */
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&pci_memory>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+				&pinctrl_pwm1_default
+				&pinctrl_pwm2_default
+				&pinctrl_pwm3_default
+				&pinctrl_pwm4_default
+				&pinctrl_pwm5_default>;
+
+	fan@0 {
+		/* FAN1 (4-pin) */
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		/* FAN2 (4-pin) */
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		/* FAN3 (4-pin) */
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		/* FAN4 (6-pin) */
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+	};
+
+	fan@4 {
+		/* FAN6 (6-pin) */
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+	};
+
+	fan@5 {
+		/* FAN5 (6-pin) */
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default       /* 3VSB */
+			&pinctrl_adc1_default    /* 5VSB */
+			&pinctrl_adc2_default    /* VCPU */
+			&pinctrl_adc3_default    /* VSOC */
+			&pinctrl_adc4_default    /* VCCM */
+			&pinctrl_adc5_default    /* APU-VDDP */
+			&pinctrl_adc6_default    /* PM-VDD-CLDO */
+			&pinctrl_adc7_default    /* PM-VDDCR-S5 */
+			&pinctrl_adc8_default    /* PM-VDDCR */
+			&pinctrl_adc9_default    /* VBAT */
+			&pinctrl_adc10_default   /* 3V */
+			&pinctrl_adc11_default   /* 5V */
+			&pinctrl_adc12_default>; /* 12V */
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
new file mode 100644
index 000000000000..64f4ed07c7d2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 ASUS Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ASUS-X4TF";
+	compatible = "asus,x4tf-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+				<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-uid {
+			gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+			default-state = "off";
+		};
+
+		led-status_Y {
+			gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-sys_boot_status {
+			gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	pca9555_4_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_22: gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 - A3 0*/	"", "STRAP_BMC_BATTERY_GPIO1", "", "",
+		/*A4 - A7 4*/	"", "", "", "",
+		/*B0 - B7 8*/	"", "", "", "", "", "", "", "";
+	};
+
+	pca9555_4_26: gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9555_5_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70  {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70 >;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_5: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pca9555_5_5_20: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"", "", "", "", "", "", "", "",
+					"", "", "SYS_FAN6", "SYS_FAN5",
+					"SYS_FAN4", "SYS_FAN3",
+					"SYS_FAN2", "SYS_FAN1";
+			};
+
+			pca9555_5_5_21: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina219";
+				reg = <0x44>;
+				shunt-resistor = <2>;
+			};
+		};
+
+		channel_6: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_7: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9555_6_27: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_6_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 0*/	"", "", "", "", "", "", "", "",
+		/*B0 8*/	"Drive_NVMe1", "Drive_NVMe2", "", "",
+		/*B4 12*/	"", "", "", "";
+	};
+
+	pca9555_6_21: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		channel_9: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina219";
+				reg = <0x40>;
+				shunt-resistor = <2>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_10: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_11: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_12: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_13: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_14: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_15: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_16: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_18: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_20: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c08";
+		reg = <0x51>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdc {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs1 {
+	aspeed,lpc-io-reg = <0xca0>;
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 0*/	"", "", "", "", "", "", "", "",
+	/*B0 8*/	"", "", "", "", "", "", "PS_PWROK", "",
+	/*C0 16*/	"", "", "", "", "", "", "", "",
+	/*D0 24*/	"", "", "", "", "", "", "", "",
+	/*E0 32*/	"", "", "", "", "", "", "", "",
+	/*F0 40*/	"", "", "", "", "", "", "", "",
+	/*G0 48*/	"", "", "", "", "", "", "", "",
+	/*H0 56*/	"", "", "", "", "", "", "", "",
+	/*I0 64*/	"", "", "", "", "", "", "", "",
+	/*J0 72*/	"", "", "", "", "", "", "", "",
+	/*K0 80*/	"", "", "", "", "", "", "", "",
+	/*L0 88*/	"", "", "", "", "", "", "", "",
+	/*M0 96*/	"", "", "", "", "", "", "", "",
+	/*N0 104*/	"", "", "", "",
+	/*N4 108*/	"POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "",
+	/*O0 112*/	"", "", "", "", "", "", "", "",
+	/*P0 120*/	"ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT",
+	/*P4 124*/	"RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT",
+	/*Q0 128*/	"", "", "", "", "", "", "", "",
+	/*R0 136*/	"", "", "", "", "", "", "", "",
+	/*S0 144*/	"", "", "", "", "", "", "", "",
+	/*T0 152*/	"", "", "", "", "", "", "", "",
+	/*U0 160*/	"", "", "", "", "", "", "", "",
+	/*V0 168*/	"", "", "", "", "", "", "", "",
+	/*W0 176*/	"", "", "", "", "", "", "", "",
+	/*X0 184*/	"", "", "", "", "", "", "", "",
+	/*Y0 192*/	"", "", "", "", "", "", "", "",
+	/*Z0 200*/	"", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
new file mode 100644
index 000000000000..54a5509b04f1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
@@ -0,0 +1,940 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2020 Bytedance.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bytedance G220A BMC";
+	compatible = "bytedance,g220a-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+		i2c14 = &channel_3_0;
+		i2c15 = &channel_3_1;
+		i2c16 = &channel_3_2;
+		i2c17 = &channel_3_3;
+		i2c18 = &channel_6_0;
+		i2c19 = &channel_6_1;
+		i2c20 = &channel_6_2;
+		i2c21 = &channel_6_3;
+		i2c22 = &channel_6_4;
+		i2c23 = &channel_6_5;
+		i2c24 = &channel_6_6;
+		i2c25 = &channel_6_7;
+		i2c26 = &channel_6_8;
+		i2c27 = &channel_6_9;
+		i2c28 = &channel_6_10;
+		i2c29 = &channel_6_11;
+		i2c30 = &channel_6_12;
+		i2c31 = &channel_6_13;
+		i2c32 = &channel_6_14;
+		i2c33 = &channel_6_15;
+		i2c34 = &channel_6_16;
+		i2c35 = &channel_6_17;
+		i2c36 = &channel_6_18;
+		i2c37 = &channel_6_19;
+		i2c38 = &channel_6_20;
+		i2c39 = &channel_6_21;
+		i2c40 = &channel_6_22;
+		i2c41 = &channel_6_23;
+		i2c42 = &channel_6_24;
+		i2c43 = &channel_6_25;
+		i2c44 = &channel_10_0;
+		i2c45 = &channel_10_1;
+		i2c46 = &channel_10_2;
+		i2c47 = &channel_10_3;
+		i2c48 = &channel_10_4;
+		i2c49 = &channel_10_5;
+		i2c50 = &channel_10_6;
+		i2c51 = &channel_10_7;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@bc000000 {
+			no-map;
+			reg = <0xbc000000 0x04000000>; /* 64M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		event-burn-in-signal {
+			label = "burn-in";
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(R, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-rear-riser1-presence {
+			label = "rear-riser1-presence";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-alrt-pvddq-cpu0 {
+			label = "alrt-pvddq-cpu0";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-rear-riser0-presence {
+			label = "rear-riser0-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		event-fault-pvddq-cpu0 {
+			label = "fault-pvddq-cpu0";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-alrt-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fault-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fault-pvccin-cpu1 {
+			label = "fault-pvccin-cpuq";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-bmc-rom0-wp {
+			label = "bmc-rom0-wp";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-bmc-rom1-wp {
+			label = "bmc-rom1-wp";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-front-bp1-presence {
+			label = "front-bp1-presence";
+			gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <16>;
+		};
+
+		event-rear-bp-presence {
+			label = "rear-bp-presence";
+			gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
+			linux,code = <17>;
+		};
+
+		event-fault-pvccin-cpu0 {
+			label = "fault-pvccin-cpu0";
+			gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
+			linux,code = <18>;
+		};
+
+		event-alrt-p1v05-pvcc {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <19>;
+		};
+
+		event-fault-p1v05-pvccio {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <20>;
+		};
+
+		event-alrt-p1v8-pvccio {
+			label = "alrt-p1v8-pvccio";
+			gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
+			linux,code = <21>;
+		};
+
+		event-fault-p1v8-pvccio {
+			label = "fault-p1v8-pvccio";
+			gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
+			linux,code = <22>;
+		};
+
+		event-front-bp0-presence {
+			label = "front-bp0-presence";
+			gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
+			linux,code = <23>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,alt-boot;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0",
+			"","","","",
+	/*B0-B7*/	"BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N",
+			"","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3",
+			"FM_PROJECT_ID4","FM_PROJECT_ID5","","",
+	/*F0-F7*/	"PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N",
+			"BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY",
+			"PCH_GLB_RST_N",
+	/*G0-G7*/	"P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N",
+			"P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT",
+			"NMI_BUTTON",
+	/*H0-H7*/	"BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK",
+			"BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0",
+			"PCA9546_U70_RST_N","IRQ_SML0_ALERT_N",
+	/*I0-I7*/	"FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N",
+			"","","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N",
+			"","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N",
+			"","IRQ_SML1_PMBUS_ALERT_N","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION",
+	/*R0-R7*/	"","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N",
+			"ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","",
+	/*S0-S7*/	"BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N",
+			"FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N",
+			"","","","",
+	/*Z0-Z7*/	"XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL",
+			"PCH_BMC_SMI_ACTIVE_R_N","","","","",
+	/*AA0-AA7*/	"PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R",
+			"FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","CPLD_PLTRST_B_N";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_3_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_3_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_3_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_6_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_6_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_6_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		channel_6_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		channel_6_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		channel_6_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		channel_6_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_12: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_13: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_14: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_15: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_16: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_17: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_18: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_19: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			i2c-mux@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			 };
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	pca0:pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1:pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+};
+
+&gpio {
+	pin-gpio-i3-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "NCSI_BMC_R_SEL";
+	};
+
+	pin-gpio-b6-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "EN_NCSI_SWITCH_N";
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
new file mode 100644
index 000000000000..cce8d0416dc8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-delta-ahe50dc.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+#define EFUSE_OUTPUT(n)					\
+	efuse##n {					\
+		compatible = "regulator-output";	\
+		vout-supply = <&efuse##n>;		\
+	}
+
+#define __stringify(x) #x
+
+#define EFUSE(hexaddr, num)							\
+	efuse@##hexaddr {							\
+		compatible = "ti,lm25066";					\
+		reg = <0x##hexaddr>;						\
+		shunt-resistor-micro-ohms = <675>;				\
+		regulators {							\
+			efuse##num: vout {					\
+				regulator-name = __stringify(efuse##num##-reg);	\
+			};							\
+		};								\
+	}
+
+/{
+	model = "Delta Power AHE-50DC";
+	compatible = "delta,ahe50dc-bmc", "aspeed,ast2400";
+
+	aliases {
+		serial4 = &uart5;
+
+		/*
+		 * pca9541-arbitrated logical i2c buses are numbered as the
+		 * corresponding physical bus plus 20
+		 */
+		i2c20 = &i2carb0;
+		i2c21 = &i2carb1;
+		i2c22 = &i2carb2;
+		i2c23 = &i2carb3;
+		i2c24 = &i2carb4;
+		i2c26 = &i2carb6;
+		i2c27 = &i2carb7;
+		i2c28 = &i2carb8;
+		i2c32 = &i2carb12;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,115200n8 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		panic {
+			gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+
+	EFUSE_OUTPUT(01);
+	EFUSE_OUTPUT(02);
+	EFUSE_OUTPUT(03);
+	EFUSE_OUTPUT(04);
+	EFUSE_OUTPUT(05);
+	EFUSE_OUTPUT(06);
+	EFUSE_OUTPUT(07);
+	EFUSE_OUTPUT(08);
+	EFUSE_OUTPUT(09);
+	EFUSE_OUTPUT(10);
+	EFUSE_OUTPUT(11);
+	EFUSE_OUTPUT(12);
+	EFUSE_OUTPUT(13);
+	EFUSE_OUTPUT(14);
+	EFUSE_OUTPUT(15);
+	EFUSE_OUTPUT(16);
+	EFUSE_OUTPUT(17);
+	EFUSE_OUTPUT(18);
+	EFUSE_OUTPUT(19);
+	EFUSE_OUTPUT(20);
+	EFUSE_OUTPUT(21);
+	EFUSE_OUTPUT(22);
+	EFUSE_OUTPUT(23);
+	EFUSE_OUTPUT(24);
+	EFUSE_OUTPUT(25);
+	EFUSE_OUTPUT(26);
+	EFUSE_OUTPUT(27);
+	EFUSE_OUTPUT(28);
+	EFUSE_OUTPUT(29);
+	EFUSE_OUTPUT(30);
+	EFUSE_OUTPUT(31);
+	EFUSE_OUTPUT(32);
+	EFUSE_OUTPUT(33);
+	EFUSE_OUTPUT(34);
+	EFUSE_OUTPUT(35);
+	EFUSE_OUTPUT(36);
+	EFUSE_OUTPUT(37);
+	EFUSE_OUTPUT(38);
+	EFUSE_OUTPUT(39);
+	EFUSE_OUTPUT(40);
+	EFUSE_OUTPUT(41);
+	EFUSE_OUTPUT(42);
+	EFUSE_OUTPUT(43);
+	EFUSE_OUTPUT(44);
+	EFUSE_OUTPUT(45);
+	EFUSE_OUTPUT(46);
+	EFUSE_OUTPUT(47);
+	EFUSE_OUTPUT(48);
+	EFUSE_OUTPUT(49);
+	EFUSE_OUTPUT(50);
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "flash0";
+		spi-max-frequency = <50000000>; // 50 MHz
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@79 {
+		compatible = "nxp,pca9541";
+		reg = <0x79>;
+
+		i2carb0: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57 */
+			EFUSE(10, 03);
+			EFUSE(11, 04);
+			EFUSE(12, 01);
+			EFUSE(13, 02);
+			EFUSE(14, 13);
+			EFUSE(15, 14);
+			EFUSE(16, 15);
+			EFUSE(17, 16);
+			EFUSE(40, 12);
+			EFUSE(41, 11);
+			EFUSE(42, 10);
+			EFUSE(43, 09);
+			EFUSE(44, 08);
+			EFUSE(45, 07);
+			EFUSE(46, 05);
+			EFUSE(47, 06);
+			EFUSE(50, 17);
+			EFUSE(51, 18);
+			EFUSE(52, 20);
+			EFUSE(53, 19);
+			EFUSE(54, 22);
+			EFUSE(55, 21);
+			EFUSE(56, 24);
+			EFUSE(57, 23);
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@72 {
+		compatible = "nxp,pca9541";
+		reg = <0x72>;
+
+		i2carb1: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@73 {
+		compatible = "nxp,pca9541";
+		reg = <0x73>;
+
+		i2carb2: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2carb3: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7a {
+		compatible = "nxp,pca9541";
+		reg = <0x7a>;
+
+		i2carb4: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9534";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */
+			EFUSE(10, 27);
+			EFUSE(11, 28);
+			EFUSE(12, 25);
+			EFUSE(13, 26);
+			EFUSE(14, 37);
+			EFUSE(15, 38);
+			EFUSE(16, 39);
+			EFUSE(17, 40);
+			EFUSE(40, 36);
+			EFUSE(41, 35);
+			EFUSE(42, 34);
+			EFUSE(43, 33);
+			EFUSE(44, 32);
+			EFUSE(45, 31);
+			EFUSE(46, 29);
+			EFUSE(47, 30);
+			EFUSE(50, 41);
+			EFUSE(51, 42);
+			EFUSE(52, 44);
+			EFUSE(53, 43);
+			EFUSE(54, 46);
+			EFUSE(55, 45);
+			EFUSE(56, 48);
+			EFUSE(57, 47);
+			EFUSE(59, 49);
+			EFUSE(5a, 50);
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@75 {
+		compatible = "nxp,pca9541";
+		reg = <0x75>;
+
+		i2carb6: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@76 {
+		compatible = "nxp,pca9541";
+		reg = <0x76>;
+
+		i2carb7: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7c {
+		compatible = "nxp,pca9541";
+		reg = <0x7c>;
+
+		i2carb8: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fancontrol@30 {
+				compatible = "delta,ahe50dc-fan";
+				reg = <0x30>;
+			};
+
+			/* Baseboard FRU eeprom */
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@71 {
+		compatible = "nxp,pca9541";
+		reg = <0x71>;
+
+		i2carb12: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "", "", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "",
+		/*  D */ "", "", "", "", "", "", "", "",
+		/*  E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "",
+		/*  F */ "", "", "", "", "", "", "", "",
+		/*  G */ "", "", "", "", "", "", "", "",
+		/*  H */ "", "", "", "", "", "", "", "",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "", "", "BMC_ID", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "",
+		/*  Z */ "", "", "", "", "", "", "", "",
+		/* AA */ "", "", "", "", "", "", "", "",
+		/* AB */ "", "", "", "";
+
+	/*
+	 * I don't rightly know what this GPIO really *is*, but setting it to
+	 * zero causes the fans to run at full speed, after which setting it
+	 * back to one causes a power output glitch, so install a hog to keep
+	 * it at one as a failsafe to ensure nothing accidentally touches it.
+	 */
+	doom-guardrail-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
new file mode 100644
index 000000000000..24969c82d05e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts
@@ -0,0 +1,1090 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Bletchley BMC";
+	compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi1_gpio: spi1-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	front_gpio_leds {
+		compatible = "gpio-leds";
+		sys_log_id {
+			default-state = "off";
+			gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fan_gpio_leds {
+		compatible = "gpio-leds";
+		fan0_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
+		};
+		fan0_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sled1_gpio_leds {
+		compatible = "gpio-leds";
+		sled1_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled1_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled2_gpio_leds {
+		compatible = "gpio-leds";
+		sled2_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled2_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled3_gpio_leds {
+		compatible = "gpio-leds";
+		sled3_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled3_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled4_gpio_leds {
+		compatible = "gpio-leds";
+		sled4_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled4_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled5_gpio_leds {
+		compatible = "gpio-leds";
+		sled5_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled5_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled6_gpio_leds {
+		compatible = "gpio-leds";
+		sled6_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled6_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		presence-sled1 {
+			label = "presence-sled1";
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 2)>;
+		};
+		presence-sled2 {
+			label = "presence-sled2";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+		presence-sled3 {
+			label = "presence-sled3";
+			gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 4)>;
+		};
+		presence-sled4 {
+			label = "presence-sled4";
+			gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 5)>;
+		};
+		presence-sled5 {
+			label = "presence-sled5";
+			gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 6)>;
+		};
+		presence-sled6 {
+			label = "presence-sled6";
+			gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 7)>;
+		};
+	};
+
+	vbus_sled1: vbus_sled1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled2: vbus_sled2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled3: vbus_sled3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled4: vbus_sled4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled4";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled5: vbus_sled5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled6: vbus_sled6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled6";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled1_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED1_SWD_MUX", "SLED1_XRES_SWD_N",
+		"SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN";
+	};
+
+	sled1_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+	};
+
+	sled1_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled1_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled1>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled2_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED2_SWD_MUX", "SLED2_XRES_SWD_N",
+		"SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN";
+	};
+
+	sled2_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+	};
+
+	sled2_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled2_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled2>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled3_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED3_SWD_MUX", "SLED3_XRES_SWD_N",
+		"SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN";
+	};
+
+	sled3_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+	};
+
+	sled3_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled3_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled3>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled4_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED4_SWD_MUX", "SLED4_XRES_SWD_N",
+		"SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN";
+	};
+
+	sled4_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+	};
+
+	sled4_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled4_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled4>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled5_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED5_SWD_MUX", "SLED5_XRES_SWD_N",
+		"SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN";
+	};
+
+	sled5_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+	};
+
+	sled5_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled5_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled5>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled6_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED6_SWD_MUX", "SLED6_XRES_SWD_N",
+		"SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN";
+	};
+
+	sled6_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
+		"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
+		"SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
+		"SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
+	};
+
+	sled6_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled6_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled6>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x20>;
+			power-role = "dual";
+			try-power-role = "sink";
+			data-role = "dual";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <10000000>;
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+
+	rtc@51 {
+		/* in-chip rtc disabled, use external rtc (battery-backed) */
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	front_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-fault-identify","power-p5v-stby-good",
+		"power-p1v0-dvdd-good","power-p1v0-avdd-good",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+		shunt-resistor-micro-ohms = <300>;
+		adi,volt-curr-sample-average = <128>;
+		adi,power-sample-average = <128>;
+	};
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	tmp421@4d {
+		compatible = "ti,tmp421";
+		reg = <0x4d>;
+	};
+
+	fan_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"presence-fan0","presence-fan1",
+		"presence-fan2","presence-fan3",
+		"power-fan0-good","power-fan1-good",
+		"power-fan2-good","power-fan3-good",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c13 {
+	multi-master;
+	aspeed,hw-timeout-ms = <1000>;
+	status = "okay";
+
+	//USB Debug Connector
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
+			"SEL_SPI2_MUX","SPI2_MUX1",
+			"SPI2_MUX2","SPI2_MUX3",
+			"","FUSB302_SLED3_INT_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"BMC_SLED1_STCK","BMC_SLED2_STCK",
+			"BMC_SLED3_STCK","BMC_SLED4_STCK",
+			"BMC_SLED5_STCK","BMC_SLED6_STCK",
+			"","",
+	/*G0-G7*/	"BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL",
+			"PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
+	/*H0-H7*/	"presence-riser1","presence-riser2",
+			"presence-sled1","presence-sled2",
+			"presence-sled3","presence-sled4",
+			"presence-sled5","presence-sled6",
+	/*I0-I7*/	"REV_ID0","",
+			"REV_ID1","REV_ID2",
+			"","BSM_FLASH_WP_STATUS",
+			"BMC_TPM_PRES_N","FUSB302_SLED6_INT_N",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","BMC_RTC_INT","","",
+	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
+			"ALERT_SLED3_N","ALERT_SLED4_N",
+			"ALERT_SLED5_N","ALERT_SLED6_N",
+			"","USB_DEBUG_PWR_BTN_N",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"","","","",
+			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
+	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","BAT_DETECT",
+			"BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"PWRGD_CNS_PSU","RST_BMC_MVL_N",
+			"P12V_AUX_ALERT1_N","PSU_PRSNT",
+			"USB2_SEL0_A","USB2_SEL1_A",
+			"USB2_SEL0_B","USB2_SEL1_B",
+	/*W0-W7*/	"RST_FRONT_IOEXP_N","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"BMC_SELF_HW_RST","BSM_PRSNT_N",
+			"BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&adc0 {
+	vref = <1800>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio0 {
+	status = "okay";
+	/* TODO: Add Marvell 88E6191X */
+};
+
+&mdio3 {
+	status = "okay";
+	/* TODO: Add Marvell 88X3310 */
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiov2_unbiased_default: gpiov2 {
+		pins = "AD14";
+		bias-disable;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
new file mode 100644
index 000000000000..14dd0ab64130
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Catalina BMC";
+	compatible = "facebook,catalina-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c5mux0ch0;
+		i2c49 = &i2c5mux0ch1;
+		i2c50 = &i2c5mux0ch2;
+		i2c51 = &i2c5mux0ch3;
+		i2c52 = &i2c5mux0ch4;
+		i2c53 = &i2c5mux0ch5;
+		i2c54 = &i2c5mux0ch6;
+		i2c55 = &i2c5mux0ch7;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			mctp-controller;
+
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			mctp-controller;
+
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			mctp-controller;
+
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			mctp-controller;
+
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			power-sensor@22 {
+				compatible = "mps,mp5990";
+				reg = <0x22>;
+			};
+		};
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			fanctl2: fan-controller@1 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x01>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl2 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl2 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl2 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl2 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl3: fan-controller@2 {
+				compatible = "nuvoton,nct7363";
+				reg = <0x02>;
+				#pwm-cells = <2>;
+
+				fan-9 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x09>;
+				};
+				fan-11 {
+					pwms = <&fanctl3 0 40000>;
+					tach-ch = /bits/ 8 <0x0b>;
+				};
+				fan-10 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0a>;
+				};
+				fan-13 {
+					pwms = <&fanctl3 4 40000>;
+					tach-ch = /bits/ 8 <0x0d>;
+				};
+				fan-15 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x0f>;
+				};
+				fan-1 {
+					pwms = <&fanctl3 6 40000>;
+					tach-ch = /bits/ 8 <0x01>;
+				};
+				fan-0 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x00>;
+				};
+				fan-3 {
+					pwms = <&fanctl3 10 40000>;
+					tach-ch = /bits/ 8 <0x03>;
+				};
+			};
+			fanctl0: fan-controller@21 {
+				compatible = "maxim,max31790";
+				reg = <0x21>;
+			};
+			fanctl1: fan-controller@27 {
+				compatible = "maxim,max31790";
+				reg = <0x27>;
+			};
+		};
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			power-monitor@13 {
+				compatible = "infineon,xdp710";
+				reg = <0x13>;
+			};
+			power-monitor@1c {
+				compatible = "infineon,xdp710";
+				reg = <0x1c>;
+			};
+			power-monitor@42 {
+				compatible = "lltc,ltc4287";
+				reg = <0x42>;
+				shunt-resistor-micro-ohms = <100>;
+			};
+			power-monitor@43 {
+				compatible = "lltc,ltc4287";
+				reg = <0x43>;
+				shunt-resistor-micro-ohms = <100>;
+			};
+		};
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// PDB FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			// PDB TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+		};
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// PDB IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// OSFP IOEXP
+			io_expander6: gpio@25 {
+				compatible = "nxp,pca9555";
+				reg = <0x25>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			// OSFP FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO FRU EEPROM
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO REMOTE TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	// Module 0 IOEXP
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Module 1 IOEXP
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// HMC IOEXP
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Module 0 EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2c5mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2c5mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2c5mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		i2c5mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+		i2c5mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+		i2c5mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			// HDD FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+		i2c5mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// BMC IOEXP on Module 0
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// SCM TEMP SENSOR
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// Module 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Secondary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// Module 0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Primary CBC FRU EEPROM
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PDB CPLD IOEXP 0x15
+	io_expander14: gpio@15 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x15>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&pinctrl {
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+
+	pinctrl_ncsi4_default: ncsi4_default {
+		function = "RMII4";
+		groups = "NCSI4";
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&io_expander0 {
+	gpio-line-names =
+		"FPGA_THERM_OVERT_L","FPGA_READY_BMC",
+		"HMC_BMC_DETECT","HMC_PGOOD",
+		"","BMC_SELF_PWR_CYCLE",
+		"FPGA_EROT_FATAL_ERROR_L","WP_HW_EXT_CTRL_L",
+		"EROT_FPGA_RST_L","FPGA_EROT_RECOVERY_L",
+		"BMC_EROT_FPGA_SPI_MUX_SEL","USB2_HUB_RESET_L",
+		"NCSI_CS1_SEL","SGPIO_EN_L",
+		"B2B_IOEXP_INT_L","I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander1 {
+	gpio-line-names =
+		"SEC_FPGA_THERM_OVERT_L","SEC_FPGA_READY_BMC",
+		"","",
+		"","",
+		"SEC_FPGA_EROT_FATAL_ERROR_L","SEC_WP_HW_EXT_CTRL_L",
+		"SEC_EROT_FPGA_RST_L","SEC_FPGA_EROT_RECOVERY_L",
+		"SEC_BMC_EROT_FPGA_SPI_MUX_SEL","",
+		"","",
+		"","SEC_I2C_BUS_MUX_RESET_L";
+};
+
+&io_expander2 {
+	gpio-line-names =
+		"HMC_PRSNT_L","HMC_READY",
+		"HMC_EROT_FATAL_ERROR_L","I2C_MUX_SEL",
+		"HMC_EROT_SPI_MUX_SEL","HMC_EROT_RECOVERY_L",
+		"HMC_EROT_RST_L","GLOBAL_WP_HMC",
+		"FPGA_RST_L","USB2_HUB_RST",
+		"CPU_UART_MUX_SEL","",
+		"","","","";
+};
+
+&io_expander3 {
+	gpio-line-names =
+		"RTC_MUX_SEL","PCI_MUX_SEL","TPM_MUX_SEL","FAN_MUX-SEL",
+		"SGMII_MUX_SEL","DP_MUX_SEL","UPHY3_USB_SEL","NCSI_MUX_SEL",
+		"BMC_PHY_RST","RTC_CLR_L","BMC_12V_CTRL","PS_RUN_IO0_PG",
+		"","","","";
+};
+
+&io_expander4 {
+	gpio-line-names =
+		"stby_power_en_cpld","stby_power_gd_cpld","","",
+		"","","","",
+		"","","","",
+		"","","","";
+};
+
+&io_expander5 {
+	gpio-line-names =
+		"JTAG_MUX_SEL","IOX_BMC_RESET","","",
+		"","","","";
+};
+
+&io_expander6 {
+	gpio-line-names =
+		"OSFP_PHASE_ID0","OSFP_PHASE_ID1",
+		"OSFP_PHASE_ID2","OSFP_PHASE_ID3",
+		"","","","",
+		"OSFP_BOARD_ID0","OSFP_BOARD_ID1",
+		"OSFP_BOARD_ID2","PWRGD_P3V3_N1",
+		"PWRGD_P3V3_N2","","","";
+};
+
+&io_expander7 {
+	gpio-line-names =
+		"RST_CX7_0","RST_CX7_1",
+		"CX0_SSD0_PRSNT_L","CX1_SSD1_PRSNT_L",
+		"CX_BOOT_CMPLT_CX0","CX_BOOT_CMPLT_CX1",
+		"CX_TWARN_CX0_L","CX_TWARN_CX1_L",
+		"CX_OVT_SHDN_CX0","CX_OVT_SHDN_CX1",
+		"FNP_L_CX0","FNP_L_CX1",
+		"","MCU_GPIO","MCU_RST_N","MCU_RECOVERY_N";
+};
+
+&io_expander8 {
+	gpio-line-names =
+		"SEC_RST_CX7_0","SEC_RST_CX7_1",
+		"SEC_CX0_SSD0_PRSNT_L","SEC_CX1_SSD1_PRSNT_L",
+		"SEC_CX_BOOT_CMPLT_CX0","SEC_CX_BOOT_CMPLT_CX1",
+		"SEC_CX_TWARN_CX0_L","SEC_CX_TWARN_CX1_L",
+		"SEC_CX_OVT_SHDN_CX0","SEC_CX_OVT_SHDN_CX1",
+		"SEC_FNP_L_CX0","SEC_FNP_L_CX1",
+		"","SEC_MCU_GPIO","SEC_MCU_RST_N","SEC_MCU_RECOVERY_N";
+};
+
+&io_expander9 {
+	gpio-line-names =
+		"LEAK3_DETECT_R","LEAK1_DETECT_R",
+		"LEAK2_DETECT_R","LEAK0_DETECT_R",
+		"CHASSIS3_LEAK_Q_N_PLD","CHASSIS1_LEAK_Q_N_PLD",
+		"CHASSIS2_LEAK_Q_N_PLD","CHASSIS0_LEAK_Q_N_PLD",
+		"P12V_AUX_FAN_ALERT_PLD_N","P12V_AUX_FAN_OC_PLD_N",
+		"P12V_AUX_FAN_FAULT_PLD_N","LEAK_DETECT_RMC_N_R",
+		"RSVD_RMC_GPIO3_R","SMB_RJ45_FIO_TMP_ALERT",
+		"","";
+};
+
+&io_expander10 {
+	gpio-line-names =
+		"FM_P12V_NIC1_FLTB_R_N","FM_P3V3_NIC1_FAULT_R_N",
+		"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+		"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+		"FM_P12V_NIC0_FLTB_R_N","FM_P3V3_NIC0_FAULT_R_N",
+		"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N",
+		"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+		"P12V_AUX_PSU_SMB_ALERT_R_L","P12V_SCM_SENSE_ALERT_R_N",
+		"NODEB_PSU_SMB_ALERT_R_L","NODEA_PSU_SMB_ALERT_R_L",
+		"P52V_SENSE_ALERT_PLD_N","P48V_HS2_FAULT_N_PLD",
+		"P48V_HS1_FAULT_N_PLD","";
+};
+
+&io_expander11 {
+	gpio-line-names =
+		"FAN_7_PRESENT_N","FAN_6_PRESENT_N",
+		"FAN_5_PRESENT_N","FAN_4_PRESENT_N",
+		"FAN_3_PRESENT_N","FAN_2_PRESENT_N",
+		"FAN_1_PRESENT_N","FAN_0_PRESENT_N",
+		"PRSNT_CHASSIS3_LEAK_CABLE_R_N","PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+		"PRSNT_CHASSIS2_LEAK_CABLE_R_N","PRSNT_CHASSIS0_LEAK_CABLE_R_N",
+		"PRSNT_RJ45_FIO_N_R","PRSNT_HDDBD_POWER_CABLE_N",
+		"PRSNT_OSFP_POWER_CABLE_N","";
+};
+
+&io_expander12 {
+	gpio-line-names =
+		"RST_OCP_V3_1_R_N","NIC0_PERST_N",
+		"OCP_SFF_PERST_FROM_HOST_ISO_PLD_N","OCP_SFF_MAIN_PWR_EN",
+		"FM_OCP_SFF_PWR_GOOD_PLD","OCP_SFF_AUX_PWR_PLD_EN_R",
+		"HP_LVC3_OCP_V3_1_PWRGD_PLD","HP_OCP_V3_1_HSC_PWRGD_PLD_R",
+		"RST_OCP_V3_2_R_N","NIC1_PERST_N",
+		"OCP_V3_2_PERST_FROM_HOST_ISO_PLD_N","OCP_V3_2_MAIN_PWR_EN",
+		"FM_OCP_V3_2_PWR_GOOD_PLD","OCP_V3_2_AUX_PWR_PLD_EN_R",
+		"HP_LVC3_OCP_V3_2_PWRGD_PLD","HP_OCP_V3_2_HSC_PWRGD_PLD_R";
+};
+
+&io_expander13 {
+	gpio-line-names =
+		"NODEA_NODEB_PWOK_PLD_ISO_R","PWR_EN_NICS",
+		"PWRGD_P12V_AUX_FAN_PLD","P12V_AUX_FAN_EN_PLD",
+		"PWRGD_P3V3_AUX_PLD","PWRGD_P12V_AUX_PLD_ISO_R",
+		"FM_MAIN_PWREN_FROM_RMC_R","FM_MAIN_PWREN_RMC_EN_ISO_R",
+		"PWRGD_RMC_R","PWRGD_P12V_AUX_FAN_PLD",
+		"P12V_AUX_FAN_EN_PLD","FM_SYS_THROTTLE_N",
+		"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N","HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+		"","";
+};
+
+&io_expander14 {
+	gpio-line-names =
+		"","","","","","","","",
+		"FM_BOARD_BMC_SKU_ID3","FM_BOARD_BMC_SKU_ID2",
+		"FM_BOARD_BMC_SKU_ID1","FM_BOARD_BMC_SKU_ID0",
+		"FAB_BMC_REV_ID2","FAB_BMC_REV_ID1",
+		"FAB_BMC_REV_ID0","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 000000000000..ecef44d89977
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1283 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Clemente BMC";
+	compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c0mux0ch1mux0ch0;
+		i2c49 = &i2c0mux0ch1mux0ch1;
+		i2c50 = &i2c0mux0ch1mux0ch2;
+		i2c51 = &i2c0mux0ch1mux0ch3;
+		i2c52 = &i2c0mux3ch1mux0ch0;
+		i2c53 = &i2c0mux3ch1mux0ch1;
+		i2c54 = &i2c0mux3ch1mux0ch2;
+		i2c55 = &i2c0mux3ch1mux0ch3;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>;
+		};
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"BMC_GPIOC0","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","BMC_GPIOD4","","","",
+	/*E0-E7*/	"BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"BMC_GPIOY4","BMC_GPIOY5","","",
+	/*Z0-Z7*/	"","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B3*/	"","","","",
+	/*18B4-18B7*/	"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane
+			i2c0mux0ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux0ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux0ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux0ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux0ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"RST_CX7_0",
+					"RST_CX7_1",
+					"CX0_SSD0_PRSNT_L",
+					"CX1_SSD1_PRSNT_L",
+					"CX_BOOT_CMPLT_CX0",
+					"CX_BOOT_CMPLT_CX1",
+					"CX_TWARN_CX0_L",
+					"CX_TWARN_CX1_L",
+					"CX_OVT_SHDN_CX0",
+					"CX_OVT_SHDN_CX1",
+					"FNP_L_CX0",
+					"FNP_L_CX1",
+					"",
+					"MCU_GPIO",
+					"MCU_RST_N",
+					"MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 0 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// E1.S Backplane HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane MUX
+			i2c0mux3ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux3ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux3ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux3ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux3ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"SEC_RST_CX7_0",
+					"SEC_RST_CX7_1",
+					"SEC_CX0_SSD0_PRSNT_L",
+					"SEC_CX1_SSD1_PRSNT_L",
+					"SEC_CX_BOOT_CMPLT_CX0",
+					"SEC_CX_BOOT_CMPLT_CX1",
+					"SEC_CX_TWARN_CX0_L",
+					"SEC_CX_TWARN_CX1_L",
+					"SEC_CX_OVT_SHDN_CX0",
+					"SEC_CX_OVT_SHDN_CX1",
+					"SEC_FNP_L_CX0",
+					"SEC_FNP_L_CX1",
+					"",
+					"SEC_MCU_GPIO",
+					"SEC_MCU_RST_N",
+					"SEC_MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 1 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	// PDB
+	power-monitor@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+	};
+
+	// PDB
+	power-monitor@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+	};
+
+	// Module 0
+	fanctl0: fan-controller@20{
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	// Module 0
+	fanctl1: fan-controller@23{
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	// Module 1
+	fanctl2: fan-controller@2c{
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	// Module 1
+	fanctl3: fan-controller@2f{
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+
+	// Module 0 Leak Sensor
+	adc@34 {
+		compatible = "maxim,max1363";
+		reg = <0x34>;
+	};
+
+	// Module 1 Leak Sensor
+	adc@35 {
+		compatible = "maxim,max1363";
+		reg = <0x35>;
+	};
+
+	// PDB TEMP SENSOR
+	temperature-sensor@4e {
+		compatible = "ti,tmp1075";
+		reg = <0x4e>;
+	};
+
+	// PDB FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	// PDB
+	vrm@60 {
+		compatible = "renesas,raa228004";
+		reg = <0x60>;
+	};
+
+	// PDB
+	vrm@61 {
+		compatible = "renesas,raa228004";
+		reg = <0x61>;
+	};
+
+	// Interposer
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// Interposer TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// Interposer FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+		};
+
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// Interposer IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"JTAG_MUX_SEL",
+					"IOX_BMC_RESET",
+					"RTC_CLR_L",
+					"RTC_U77_ALRT_N",
+					"",
+					"PSU_ALERT_N",
+					"",
+					"RST_P12V_STBY_N";
+			};
+		};
+
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Module 0, Expander @0x20
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB2_HUB_RST_L-O",
+			"",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L",
+			"SEC_FPGA_READY_BMC",
+			"SEC_HMC_BMC_DETECT",
+			"SEC_HMC_PGOOD",
+			"",
+			"SEC_BMC_SELF_POWER_CYCLE",
+			"SEC_SEC_FPGA_EROT_FATAL_ERROR_L",
+			"SEC_WP_HW_EXT_CTRL_L",
+			"SEC_EROT_FPGA_RST_L",
+			"SEC_FPGA_EROT_RECOVERY_L",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL",
+			"SEC_USB2_HUB_RST_L",
+			"",
+			"SEC_SGPIO_EN_L",
+			"SEC_IOB_IOEXP_INT_L",
+			"SEC_I2C_BUS_MUX_RESET_L";
+	};
+
+	// HMC Expander @0x27
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// Module 0 Aux EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 Aux EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"RTC_MUX_SEL",
+			"PCI_MUX_SEL",
+			"TPM_MUX_SEL",
+			"FAN_MUX-SEL",
+			"SGMII_MUX_SEL",
+			"DP_MUX_SEL",
+			"UPHY3_USB_SEL",
+			"NCSI_MUX_SEL",
+			"BMC_PHY_RST",
+			"RTC_CLR_L",
+			"BMC_12V_CTRL",
+			"PS_RUN_IO0_PG",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+	// SCM TEMP SENSOR BOARD
+	temperature-sensor@4b {
+		compatible = "national,lm75b";
+		reg = <0x4b>;
+	};
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"stby_power_en_cpld",
+			"stby_power_gd_cpld",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// HPM 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+	// CBC 2 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+	// CBC 3 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// HPM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// CBC 0 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// CBC 1 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"wSequence_Latch_State_N",
+			"wP12V_N1N2_RUNTIME_FLT_N",
+			"wP12V_FAN_RUNTIME_FLT_N",
+			"wP12V_AUX_RUNTIME_FLT_N",
+			"wHost_PERST_SEQPWR_FLT_N",
+			"wP12V_N1N2_SEQPWR_FLT_N",
+			"wP12V_FAN_SEQPWR_FLT_N",
+			"wP12V_AUX_SEQPWR_FLT_N",
+			"wP12V_RUNTIME_FLT_NIC1_N",
+			"wAUX_RUNTIME_FLT_NIC1_N",
+			"wP12V_SEQPWR_FLT_NIC1_N",
+			"wAUX_SEQPWR_FLT_NIC1_N",
+			"wP12V_RUNTIME_FLT_NIC0_N",
+			"wAUX_RUNTIME_FLT_NIC0_N",
+			"wP12V_SEQPWR_FLT_NIC0_N",
+			"wAUX_SEQPWR_FLT_NIC0_N";
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FM_P12V_NIC1_FLTB_R_N",
+			"FM_P3V3_NIC1_FAULT_R_N",
+			"FM_P12V_NIC0_FLTB_R_N",
+			"FM_P3V3_NIC0_FAULT_R_N",
+			"P48V_HS2_FAULT_N_PLD",
+			"P48V_HS1_FAULT_N_PLD",
+			"P12V_AUX_FAN_OC_PLD_N",
+			"P12V_AUX_FAN_FAULT_PLD_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"FM_SYS_THROTTLE_N",
+			"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+			"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"P12V_AUX_PSU_SMB_ALERT_R_L",
+			"P12V_SCM_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+			"NODEB_PSU_SMB_ALERT_R_L",
+			"NODEA_PSU_SMB_ALERT_R_L",
+			"P12V_AUX_FAN_ALERT_PLD_N",
+			"P52V_SENSE_ALERT_PLD_N",
+			"PRSNT_RJ45_FIO_N_R",
+			"FM_MAIN_PWREN_RMC_EN_ISO_R",
+			"CHASSIS3_LEAK_Q_N_PLD",
+			"CHASSIS2_LEAK_Q_N_PLD",
+			"CHASSIS1_LEAK_Q_N_PLD",
+			"CHASSIS0_LEAK_Q_N_PLD",
+			"",
+			"SMB_RJ45_FIO_TMP_ALERT";
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FAN_7_PRESENT_N",
+			"FAN_6_PRESENT_N",
+			"FAN_5_PRESENT_N",
+			"FAN_4_PRESENT_N",
+			"FAN_3_PRESENT_N",
+			"FAN_2_PRESENT_N",
+			"FAN_1_PRESENT_N",
+			"FAN_0_PRESENT_N",
+			"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N",
+			"HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+			"PRSNT_HDDBD_POWER_CABLE_N",
+			"PRSNT_OSFP0_POWER_CABLE_N",
+			"PRSNT_CHASSIS3_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"rmc_en_dc_pwr_on",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"leak_config_0",
+			"leak_config_1",
+			"leak_config_2",
+			"leak_config_3",
+			"mfg_led_test_mode_l",
+			"small_leak_err_inj",
+			"large_leak_err_inj",
+			"";
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&udma {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
new file mode 100644
index 000000000000..24153868cc00
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
@@ -0,0 +1,1590 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Backpack CMM BMC";
+	compatible = "facebook,cmm-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+
+		/*
+		 * PCA9548 (1-0077) provides 8 channels for connecting to
+		 * 4 Line Cards and 4 Fabric Cards.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (2-0071) provides 8 channels for connecting to
+		 * Power Distribution Board.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (8-0077) provides 8 channels and the first 4
+		 * channels are connecting to 4 Fan Control Boards.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * 2 PCA9548 (18-0070 & 18-0073), 16 channels connecting
+		 * to Line Card #1.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * 2 PCA9548 (19-0070 & 19-0073), 16 channels connecting
+		 * to Line Card #2.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * 2 PCA9548 (20-0070 & 20-0073), 16 channels connecting
+		 * to Line Card #3.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * 2 PCA9548 (21-0070 & 21-0073), 16 channels connecting
+		 * to Line Card #4.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * 2 PCA9548 (16-0070 & 16-0073), 16 channels connecting
+		 * to Fabric Card #1.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * 2 PCA9548 (17-0070 & 17-0073), 16 channels connecting
+		 * to Fabric Card #2.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * 2 PCA9548 (22-0070 & 22-0073), 16 channels connecting
+		 * to Fabric Card #3.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+		i2c144 = &imux144;
+		i2c145 = &imux145;
+		i2c146 = &imux146;
+		i2c147 = &imux147;
+		i2c148 = &imux148;
+		i2c149 = &imux149;
+		i2c150 = &imux150;
+		i2c151 = &imux151;
+
+		/*
+		 * 2 PCA9548 (23-0070 & 23-0073), 16 channels connecting
+		 * to Fabric Card #4.
+		 */
+		i2c152 = &imux152;
+		i2c153 = &imux153;
+		i2c154 = &imux154;
+		i2c155 = &imux155;
+		i2c156 = &imux156;
+		i2c157 = &imux157;
+		i2c158 = &imux158;
+		i2c159 = &imux159;
+		i2c160 = &imux160;
+		i2c161 = &imux161;
+		i2c162 = &imux162;
+		i2c163 = &imux163;
+		i2c164 = &imux164;
+		i2c165 = &imux165;
+		i2c166 = &imux166;
+		i2c167 = &imux167;
+
+		/*
+		 * PCA9548 (32-0070), 8 channels connecting to Fan Control
+		 # Board #1.
+		 */
+		i2c168 = &imux168;
+		i2c169 = &imux169;
+		i2c170 = &imux170;
+		i2c171 = &imux171;
+		i2c172 = &imux172;
+		i2c173 = &imux173;
+		i2c174 = &imux174;
+		i2c175 = &imux175;
+
+		/*
+		 * PCA9548 (33-0070), 8 channels connecting to Fan Control
+		 # Board #2.
+		 */
+		i2c176 = &imux176;
+		i2c177 = &imux177;
+		i2c178 = &imux178;
+		i2c179 = &imux179;
+		i2c180 = &imux180;
+		i2c181 = &imux181;
+		i2c182 = &imux182;
+		i2c183 = &imux183;
+
+		/*
+		 * PCA9548 (34-0070), 8 channels connecting to Fan Control
+		 # Board #3.
+		 */
+		i2c184 = &imux184;
+		i2c185 = &imux185;
+		i2c186 = &imux186;
+		i2c187 = &imux187;
+		i2c188 = &imux188;
+		i2c189 = &imux189;
+		i2c190 = &imux190;
+		i2c191 = &imux191;
+
+		/*
+		 * PCA9548 (35-0070), 8 channels connecting to Fan Control
+		 # Board #4.
+		 */
+		i2c192 = &imux192;
+		i2c193 = &imux193;
+		i2c194 = &imux194;
+		i2c195 = &imux195;
+		i2c196 = &imux196;
+		i2c197 = &imux197;
+		i2c198 = &imux198;
+		i2c199 = &imux199;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlycon";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndcd1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default
+		     &pinctrl_ncts3_default
+		     &pinctrl_ndcd3_default
+		     &pinctrl_nri3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c0 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Line Cards and Fabric Cards.
+ */
+&i2c1 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fabric Card #1 */
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #2 */
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #1 */
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux40: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux41: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux42: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux43: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux44: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux45: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux46: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux47: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #2 */
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To LC3 SCM */
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #4 */
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #3 */
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux144: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux145: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux146: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux147: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux148: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux149: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux150: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux151: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #4 */
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux152: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux153: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux154: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux155: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux156: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux157: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux158: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux159: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux160: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux161: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux162: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux163: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux164: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux165: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux166: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux167: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+	};
+};
+
+/*
+ * I2C bus to Power Distribution Board.
+ */
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2c bus connected with temperature sensors on CMM.
+ */
+&i2c3 {
+	status = "okay";
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c4 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with ADM1278.
+ */
+&i2c5 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander.
+ */
+&i2c6 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander and EPROMs.
+ */
+&i2c7 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Fan Control Boards.
+ */
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fan Control Board #1 */
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux168: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux169: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux170: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux171: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux172: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux173: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux174: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux175: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #2 */
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux176: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux177: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux178: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux179: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux180: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux181: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux182: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux183: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #3 */
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux184: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux185: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux186: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux187: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux188: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux189: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux190: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux191: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #4 */
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux192: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux193: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux194: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux195: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux196: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux197: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux198: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux199: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2C bus to CMM CPLD.
+ */
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&vhub {
+	status = "disabled";
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+&sdhci1 {
+	status = "disabled";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
new file mode 100644
index 000000000000..58c107a1b6cf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Darwin BMC";
+	compatible = "facebook,darwin-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		     &pinctrl_adc2_default &pinctrl_adc3_default
+		     &pinctrl_adc4_default &pinctrl_adc5_default
+		     &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		     &pinctrl_adc10_default &pinctrl_adc11_default
+		     &pinctrl_adc12_default &pinctrl_adc13_default
+		     &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
new file mode 100644
index 000000000000..ff1009ea1c49
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Elbert BMC";
+	compatible = "facebook,elbert-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+
+		/*
+		 * 8 child channels of PCA9548 2-0075.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * 8 child channels of PCA9548 5-0075.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c2 {
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c5 {
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+/*
+ * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port
+ * directly (fixed link, no PHY in between).
+ * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO
+ * interface, and the MDIO channel will be enabled in dts later, when
+ * BCM53134 is added to "bcm53xx" DSA driver.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
new file mode 100644
index 000000000000..aa9576d8ab56
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
@@ -0,0 +1,1256 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Fuji BMC (64MB Datastore)";
+	compatible = "facebook,fuji-data64-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0077) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (24-0071) provides 8 channels connecting to
+		 * PDB-Left.
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * PCA9548 (25-0072) provides 8 channels connecting to
+		 * PDB-Right.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * PCA9548 (26-0076) provides 8 channels connecting to
+		 * FCM1.
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * PCA9548 (27-0076) provides 8 channels connecting to
+		 * FCM2.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * PCA9548 (40-0076) provides 8 channels connecting to
+		 * PIM1.
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * PCA9548 (41-0076) provides 8 channels connecting to
+		 * PIM2.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * PCA9548 (42-0076) provides 8 channels connecting to
+		 * PIM3.
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * PCA9548 (43-0076) provides 8 channels connecting to
+		 * PIM4.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * PCA9548 (44-0076) provides 8 channels connecting to
+		 * PIM5.
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * PCA9548 (45-0076) provides 8 channels connecting to
+		 * PIM6.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * PCA9548 (46-0076) provides 8 channels connecting to
+		 * PIM7.
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * PCA9548 (47-0076) provides 8 channels connecting to
+		 * PIM8.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <3>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <0>,	/* device reg=<1> does not exist */
+			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+		eeprom@2 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <2>;
+		};
+	};
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+	};
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+				shunt-resistor-micro-ohms = <1500>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					lp5012@14 {
+						compatible = "ti,lp5012";
+						reg = <0x14>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						multi-led@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "sys";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@1 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <1>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "fan";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@2 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <2>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "psu";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@3 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <3>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "smb";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+					};
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/*
+	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
new file mode 100644
index 000000000000..5dc2a165e441
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-bmc-facebook-fuji-data64.dts"
+
+/ {
+	model = "Facebook Fuji BMC";
+	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
new file mode 100644
index 000000000000..60e875ac2461
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Galaxy 100 BMC";
+	compatible = "facebook,galaxy100-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>, <&adc 4>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x2000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+
+&i2c9 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..49914a4a179f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Greatlakes BMC";
+	compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+				<&adc1 5>, <&adc1 6>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mellanox,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
+	ncsi-package = <1>;
+	ncsi-channel = <1>;
+	ncsi-rexmit = <1>;
+	ncsi-timeout = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	mctp-controller;
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	// NIC EEPROM
+	eeprom@50 {
+		compatible = "st,24c32";
+		reg = <0x50>;
+	};
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	temperature-sensor@4f {
+		compatible = "national,lm75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+			&pinctrl_adc11_default &pinctrl_adc12_default
+			&pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+
+	gpio-line-names =
+	/*A0-A7*/ "","","","","","","","",
+	/*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
+		  "power-bmc-slot1","power-bmc-slot2",
+		  "power-bmc-slot3","power-bmc-slot4","","",
+	/*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
+		  "reset-cause-nic-secondary","","","",
+	/*D0-D7*/ "","","","","","","","",
+	/*E0-E7*/ "","","","","","","","",
+	/*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
+		  "slot3-bmc-reset-button","slot4-bmc-reset-button",
+		  "","","","presence-emmc",
+	/*G0-G7*/ "","","","","","","","",
+	/*H0-H7*/ "","","","",
+		  "presence-mb-slot1","presence-mb-slot2",
+		  "presence-mb-slot3","presence-mb-slot4",
+	/*I0-I7*/ "","","","","","","bb-bmc-button","",
+	/*J0-J7*/ "","","","","","","","",
+	/*K0-K7*/ "","","","","","","","",
+	/*L0-L7*/ "","","","","","","","",
+	/*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
+	/*N0-N7*/ "","","","","bmc-ready","","","",
+	/*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
+	/*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
+		  "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
+		  "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
+	/*Q0-Q7*/ "","","","","","","","",
+	/*R0-R7*/ "","","","","","","","",
+	/*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
+	/*T0-T7*/ "","","","","","","","",
+	/*U0-U7*/ "","","","","","","","GND",
+	/*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
+		  "bmc-slot3-ac-button","bmc-slot4-ac-button",
+		  "","","","",
+	/*W0-W7*/ "","","","","","","","",
+	/*X0-X7*/ "","","","","","","","",
+	/*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
+	/*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
new file mode 100644
index 000000000000..b733efe31e8d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -0,0 +1,822 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Harma";
+	compatible = "facebook,harma-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart4;
+		serial4 = &uart5;
+
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		spi1 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 124 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+// SOL Host Console
+&uart2 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// SOL BMC Console
+&uart4 {
+	status = "okay";
+	pinctrl-0 = <>;
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+// MTIA
+&uart6 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+// BIOS Flash
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	pwm@5e {
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina238";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb2-activate",
+		"","";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// MB NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	pwm@5e {
+		compatible = "maxim,max31790";
+		reg = <0x5e>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina238";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina238";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina238";
+		reg = <0x44>;
+		shunt-resistor = <1000>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <1000>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","fcb1-activate",
+		"","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			//Retimer Flash
+			eeprom@50 {
+				compatible = "atmel,24c2048";
+				reg = <0x50>;
+				pagesize = <128>;
+			};
+		};
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			retimer@24 {
+				compatible = "asteralabs,pt5161l";
+				reg = <0x24>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	// PDB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	power-monitor@69 {
+		compatible = "pmbus";
+		reg = <0x69>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	power-monitor@44 {
+		compatible = "lltc,ltc4287";
+		reg = <0x44>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+
+	power-monitor@40 {
+		compatible = "infineon,xdp710";
+		reg = <0x40>;
+	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <500>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9543";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux22: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+		};
+		imux23: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	mctp-controller;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// PTTV FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <222 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","health-mmc",
+		"","",
+		"","",
+		"","",
+		"","";
+	};
+
+	gpio@30 {
+		compatible = "nxp,pca9555";
+		reg = <0x30>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	gpio@31 {
+		compatible = "nxp,pca9555";
+		reg = <0x31>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	// Aegis FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	retimer@24 {
+		compatible = "asteralabs,pt5161l";
+		reg = <0x24>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			power-sensor@20 {
+				compatible = "mps,mp5990";
+				reg = <0x20>;
+			};
+			power-monitor@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+			power-monitor@62 {
+				compatible = "isil,isl69260";
+				reg = <0x62>;
+			};
+			power-monitor@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+			power-monitor@64 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x64>;
+			};
+			power-monitor@66 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x66>;
+			};
+			power-monitor@68 {
+				compatible = "infineon,xdpe152c4";
+				reg = <0x68>;
+			};
+		};
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			//MB FRU
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			adc@1d {
+				compatible = "ti,adc128d818";
+				reg = <0x1d>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+		};
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+// To Debug card
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","",
+			"bmc-spi-mux-select-0","led-identify","","",
+	/*C0-C7*/	"reset-cause-platrst","","","","",
+			"power-hsc-good","power-chassis-good","",
+	/*D0-D7*/	"","","sol-uart-select","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","",
+			"leakage-detect-alert","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"power-button","power-host-control",
+			"reset-button","","led-power","","","",
+	/*Q0-Q7*/
+			"","","","",
+			"","power-chassis-control","","uart-switch-button",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","led-identify-gate","",
+	/*V0-V7*/	"","","","",
+			"","",
+			"","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","presence-post-card","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "ac-power-button","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"presence-scm-cable","power-config-disable-e1s-0",
+	"","",
+	"","power-config-disable-e1s-1",
+	"","",
+	/*A4-A7 line 8-15*/
+	"","power-config-asic-module-enable",
+	"power-p3v3-standby","power-config-asic-power-good",
+	"power-p1v8-good","power-config-pdb-power-good",
+	"presence-cpu","smi-control-n",
+	/*B0-B3 line 16-23*/
+	"","nmi-control-n",
+	"power-pvdd33-s5","nmi-control-sync-flood-n",
+	"","",
+	"power-pvdd18-s5","",
+	/*B4-B7 line 24-31*/
+	"","FM_CPU_SP5R1",
+	"reset-cause-rsmrst","FM_CPU_SP5R2",
+	"","FM_CPU_SP5R3",
+	"","FM_CPU_SP5R4",
+	/*C0-C3 line 32-39*/
+	"","FM_CPU0_SA0",
+	"","FM_CPU0_SA1",
+	"","rt-cpu0-p0-enable",
+	"","rt-cpu0-p1-enable",
+	/*C4-C7 line 40-47*/
+	"","smb-rt-rom-p0-select",
+	"","smb-rt-rom-p1-select",
+	"","i3c-cpu-mux0-oe-n",
+	"","i3c-cpu-mux0-select",
+	/*D0-D3 line 48-55*/
+	"","i3c-cpu-mux1-oe-n",
+	"","i3c-cpu-mux1-select",
+	"","reset-control-bmc",
+	"","reset-control-cpu0-p0-mux",
+	/*D4-D7 line 56-63*/
+	"","reset-control-cpu0-p1-mux",
+	"","reset-control-e1s-mux",
+	"power-host-good","reset-control-mb-mux",
+	"host0-ready","reset-control-smb-e1s-0",
+	/*E0-E3 line 64-71*/
+	"","reset-control-smb-e1s-1",
+	"post-end-n","reset-control-srst",
+	"presence-e1s-0","reset-control-usb-hub",
+	"","reset-control",
+	/*E4-E7 line 72-79*/
+	"presence-e1s-1","reset-control-cpu-kbrst",
+	"","reset-control-platrst",
+	"","bmc-jtag-mux-select-0",
+	"","bmc-jtag-mux-select-1",
+	/*F0-F3 line 80-87*/
+	"","bmc-jtag-select",
+	"","bmc-ready-n",
+	"","bmc-ready-sgpio",
+	"","rt-cpu0-p0-force-enable",
+	/*F4-F7 line 88-95*/
+	"presence-asic-modules-0","rt-cpu0-p1-force-enable",
+	"presence-asic-modules-1","bios-debug-msg-disable",
+	"power-asic-good","uart-control-buffer-select",
+	"presence-cmm","ac-control-n",
+	/*G0-G3 line 96-103*/
+	"FM_CPU_CORETYPE2","",
+	"FM_CPU_CORETYPE1","rtc-battery-voltage-read-enable",
+	"FM_CPU_CORETYPE0","",
+	"FM_BOARD_REV_ID5","",
+	/*G4-G7 line 104-111*/
+	"FM_BOARD_REV_ID4","",
+	"FM_BOARD_REV_ID3","",
+	"FM_BOARD_REV_ID2","",
+	"FM_BOARD_REV_ID1","",
+	/*H0-H3 line 112-119*/
+	"FM_BOARD_REV_ID0","reset-control-cmos-clear",
+	"","","","","","",
+	/*H4-H7 line 120-127*/
+	"","",
+	"reset-control-pcie-expansion-3","",
+	"reset-control-pcie-expansion-2","",
+	"reset-control-pcie-expansion-1","",
+	/*I0-I3 line 128-135*/
+	"reset-control-pcie-expansion-0","",
+	"FM_EXP_SLOT_ID1","",
+	"FM_EXP_SLOT_ID0","",
+	"","",
+	/*I4-I7 line 136-143*/
+	"","","","","","","","",
+	/*J0-J3 line 144-151*/
+	"","","power-card-enable","","","","","",
+	/*J4-J7 line 152-159*/
+	"SLOT_ID_BCB_0","",
+	"SLOT_ID_BCB_1","",
+	"SLOT_ID_BCB_2","",
+	"SLOT_ID_BCB_3","",
+	/*K0-K3 line 160-167*/
+	"","","","","","","P0_I3C_APML_ALERT_L","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","irq-uv-detect-alert","",
+	/*L0-L3 line 176-183*/
+	"irq-hsc-alert","",
+	"cpu0-prochot-alert","",
+	"cpu0-thermtrip-alert","",
+	"reset-cause-pcie","",
+	/*L4-L7 line 184-191*/
+	"pvdd11-ocp-alert","",
+	"power-fault-n","",
+	"asic0-card-type-detection0-n","",
+	"asic0-card-type-detection1-n","",
+	/*M0-M3 line 192-199*/
+	"asic0-card-type-detection2-n","",
+	"uart-switch-lsb","",
+	"uart-switch-msb","",
+	"power-12v-memory-good","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"","","","","","","","",
+	/*N4-N7 line 216-223*/
+	"","","","","","","","",
+	/*O0-O3 line 224-231*/
+	"","",
+	"irq-pvddcore0-ocp-alert","",
+	"irq-pvddcore1-ocp-alert","",
+	"","",
+	/*O4-O7 line 232-239*/
+	"","","","","","","","",
+	/*P0-P3 line 240-247*/
+	"","","","","","","","",
+	/*P4-P7 line 248-255*/
+	"","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
new file mode 100644
index 000000000000..eb8d4b95596c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -0,0 +1,1619 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2023 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Minerva CMM";
+	compatible = "facebook,minerva-cmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		/*
+		 * PCA9548 (2-0077) provides 8 channels connecting to
+		 * 6 pcs of FCB (Fan Controller Board).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		spi1 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = "serial5:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "fan_status_led";
+			gpios = <&leds_gpio 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			label = "fan_fault_led_n";
+			gpios = <&leds_gpio 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-5 {
+			label = "bmc_ready_noled";
+			gpios = <&sgpiom0 141 (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	power-monitor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+		shunt-resistor = <1000>;
+	};
+
+	power-monitor@44 {
+		compatible = "lltc,ltc4287";
+		reg = <0x44>;
+		shunt-resistor-micro-ohms = <2000>;
+	};
+
+	power-monitor@43 {
+		compatible = "infineon,xdp710";
+		reg = <0x43>;
+	};
+
+	leds_gpio: gpio@19 {
+		compatible = "nxp,pca9555";
+		reg = <0x19>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@11 {
+		compatible = "nxp,pca9555";
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <238 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"PWRGD_P24V_SMPWROK", "P1V5_PWROK",
+		"P3V3_PWROK", "P5V_PWROK",
+		"P12V_SCM_PWROK", "P12V_PWROK",
+		"P24V_PWROK", "P48V_HSC_PWROK",
+		"ERR_GPIO_IRQ", "TMP75_ALERT_N",
+		"BMC_PWROK", "P12V_INA230_ALERT_N",
+		"P24V_INA230_ALERT_N","",
+		"P48V_HSC_ALERT_N", "P1V05_PWROK";
+	};
+
+	gpio@12 {
+		compatible = "nxp,pca9555";
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <240 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"P1V05_PWR_FAIL", "P1V5_PWR_FAIL",
+		"P24V_PWR_FAIL", "P24V_SM_PWR_FAIL",
+		"IRQ_NW0/1/2_N", "IRQ_NW3/4/5_N",
+		"RTC_INT_N_R", "ERR_GPIO_IRQ",
+		"", "",
+		"", "",
+		"", "",
+		"", "";
+	};
+
+	gpio@13 {
+		compatible = "nxp,pca9555";
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <242 IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"", "",
+		"", "",
+		"", "",
+		"", "",
+		"RACKMON_A_1", "RACKMON_A_2",
+		"RACKMON_B_1", "RACKMON_B_2",
+		"", "",
+		"", "";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		// FCB 1
+		imux16: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN1_PWRGD_R", "P48V_FAN2_PWRGD_R",
+				"P48V_FAN3_PWRGD_R", "P48V_FAN4_PWRGD_R",
+				"FCB_1_P48V_ZONE0_PWRGD_R", "FCB_1_P48V_ZONE1_PWRGD_R",
+				"FCB_1_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN1_ALERT_N", "INA238_FAN2_ALERT_N",
+				"INA238_FAN3_ALERT_N", "INA238_FAN4_ALERT_N",
+				"FCB_1_TMP75_ALERT_N", "",
+				"", "",
+				"FAN1_PRSNT", "FAN2_PRSNT",
+				"FAN3_PRSNT", "FAN4_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN1_IL_TACH_ALERT", "FAN1_OL_TACH_ALERT",
+				"FAN2_IL_TACH_ALERT", "FAN2_OL_TACH_ALERT",
+				"FAN3_IL_TACH_ALERT", "FAN3_OL_TACH_ALERT",
+				"FAN4_IL_TACH_ALERT", "FAN4_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <218 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_1_P1V0_POWER_FAIL", "FCB_1_P1V8_POWER_FAIL",
+				"FCB_1_P48V_ZONE0_POWER_FAIL", "FAN1_POWER_FAIL",
+				"FAN2_POWER_FAIL", "FAN3_POWER_FAIL",
+				"FAN4_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 2
+		imux17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN5_PWRGD_R", "P48V_FAN6_PWRGD_R",
+				"P48V_FAN7_PWRGD_R", "P48V_FAN8_PWRGD_R",
+				"FCB_2_P48V_ZONE0_PWRGD_R", "FCB_2_P48V_ZONE1_PWRGD_R",
+				"FCB_2_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN5_ALERT_N", "INA238_FAN6_ALERT_N",
+				"INA238_FAN7_ALERT_N", "INA238_FAN8_ALERT_N",
+				"FCB_2_TMP75_ALERT_N", "",
+				"", "",
+				"FAN5_PRSNT", "FAN6_PRSNT",
+				"FAN7_PRSNT", "FAN8_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN5_IL_TACH_ALERT", "FAN5_OL_TACH_ALERT",
+				"FAN6_IL_TACH_ALERT", "FAN6_OL_TACH_ALERT",
+				"FAN7_IL_TACH_ALERT", "FAN7_OL_TACH_ALERT",
+				"FAN8_IL_TACH_ALERT", "FAN8_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <220 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_2_P1V0_POWER_FAIL", "FCB_2_P1V8_POWER_FAIL",
+				"FCB_2_P48V_ZONE0_POWER_FAIL", "FAN5_POWER_FAIL",
+				"FAN6_POWER_FAIL", "FAN7_POWER_FAIL",
+				"FAN8_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 3
+		imux18: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN9_PWRGD_R", "P48V_FAN10_PWRGD_R",
+				"P48V_FAN11_PWRGD_R", "P48V_FAN12_PWRGD_R",
+				"FCB_3_P48V_ZONE0_PWRGD_R", "FCB_3_P48V_ZONE1_PWRGD_R",
+				"FCB_3_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN9_ALERT_N", "INA238_FAN10_ALERT_N",
+				"INA238_FAN11_ALERT_N", "INA238_FAN12_ALERT_N",
+				"FCB_3_TMP75_ALERT_N", "",
+				"", "",
+				"FAN9_PRSNT", "FAN10_PRSNT",
+				"FAN11_PRSNT", "FAN12_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN9_IL_TACH_ALERT", "FAN9_OL_TACH_ALERT",
+				"FAN10_IL_TACH_ALERT", "FAN10_OL_TACH_ALERT",
+				"FAN11_IL_TACH_ALERT", "FAN11_OL_TACH_ALERT",
+				"FAN12_IL_TACH_ALERT", "FAN12_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <230 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_3_P1V0_POWER_FAIL", "FCB_3_P1V8_POWER_FAIL",
+				"FCB_3_P48V_ZONE0_POWER_FAIL", "FAN9_POWER_FAIL",
+				"FAN10_POWER_FAIL", "FAN11_POWER_FAIL",
+				"FAN12_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 4
+		imux19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN13_PWRGD_R", "P48V_FAN14_PWRGD_R",
+				"P48V_FAN15_PWRGD_R", "P48V_FAN16_PWRGD_R",
+				"FCB_4_P48V_ZONE0_PWRGD_R", "FCB_4_P48V_ZONE1_PWRGD_R",
+				"FCB_4_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN13_ALERT_N", "INA238_FAN14_ALERT_N",
+				"INA238_FAN15_ALERT_N", "INA238_FAN16_ALERT_N",
+				"FCB_4_TMP75_ALERT_N", "",
+				"", "",
+				"FAN13_PRSNT", "FAN14_PRSNT",
+				"FAN15_PRSNT", "FAN16_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN13_IL_TACH_ALERT", "FAN13_OL_TACH_ALERT",
+				"FAN14_IL_TACH_ALERT", "FAN14_OL_TACH_ALERT",
+				"FAN15_IL_TACH_ALERT", "FAN15_OL_TACH_ALERT",
+				"FAN16_IL_TACH_ALERT", "FAN16_IL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <232 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_4_P1V0_POWER_FAIL", "FCB_4_P1V8_POWER_FAIL",
+				"FCB_4_P48V_ZONE0_POWER_FAIL", "FAN13_POWER_FAIL",
+				"FAN14_POWER_FAIL", "FAN15_POWER_FAIL",
+				"FAN16_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 5
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN20_PWRGD_R", "P48V_FAN19_PWRGD_R",
+				"P48V_FAN18_PWRGD_R", "P48V_FAN17_PWRGD_R",
+				"FCB_5_P48V_ZONE0_PWRGD_R", "FCB_5_P48V_ZONE1_PWRGD_R",
+				"FCB_5_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN20_ALERT_N", "INA238_FAN19_ALERT_N",
+				"INA238_FAN18_ALERT_N", "INA238_FAN17_ALERT_N",
+				"FCB_5_TMP75_ALERT_N", "",
+				"", "",
+				"FAN20_PRSNT", "FAN19_PRSNT",
+				"FAN18_PRSNT", "FAN17_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN20_IL_TACH_ALERT", "FAN20_OL_TACH_ALERT",
+				"FAN19_IL_TACH_ALERT", "FAN19_OL_TACH_ALERT",
+				"FAN18_IL_TACH_ALERT", "FAN18_OL_TACH_ALERT",
+				"FAN17_IL_TACH_ALERT", "FAN17_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <254 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_5_P1V0_POWER_FAIL", "FCB_5_P1V8_POWER_FAIL",
+				"FCB_5_P48V_ZONE0_POWER_FAIL", "FAN20_POWER_FAIL",
+				"FAN19_POWER_FAIL", "FAN18_POWER_FAIL",
+				"FAN17_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+		// FCB 6
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			pwm@5e {
+				compatible = "maxim,max31790";
+				reg = <0x5e>;
+			};
+
+			power-sensor@40 {
+				compatible = "ti,ina238";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@41 {
+				compatible = "ti,ina238";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@44 {
+				compatible = "ti,ina238";
+				reg = <0x44>;
+				shunt-resistor = <1000>;
+			};
+
+			power-sensor@45 {
+				compatible = "ti,ina238";
+				reg = <0x45>;
+				shunt-resistor = <1000>;
+			};
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			gpio@11 {
+				compatible = "nxp,pca9555";
+				reg = <0x11>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"P48V_FAN24_PWRGD_R", "P48V_FAN23_PWRGD_R",
+				"P48V_FAN22_PWRGD_R", "P48V_FAN21_PWRGD_R",
+				"FCB_6_P48V_ZONE0_PWRGD_R", "FCB_6_P48V_ZONE1_PWRGD_R",
+				"FCB_6_PWRGD_P3V3_R", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@12 {
+				compatible = "nxp,pca9555";
+				reg = <0x12>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"INA238_FAN24_ALERT_N", "INA238_FAN23_ALERT_N",
+				"INA238_FAN22_ALERT_N", "INA238_FAN21_ALERT_N",
+				"FCB_6_TMP75_ALERT_N", "",
+				"", "",
+				"FAN24_PRSNT", "FAN23_PRSNT",
+				"FAN22_PRSNT", "FAN21_PRSNT",
+				"", "",
+				"", "";
+			};
+
+			gpio@13 {
+				compatible = "nxp,pca9555";
+				reg = <0x13>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FAN24_IL_TACH_ALERT", "FAN24_OL_TACH_ALERT",
+				"FAN23_IL_TACH_ALERT", "FAN23_OL_TACH_ALERT",
+				"FAN22_IL_TACH_ALERT", "FAN22_OL_TACH_ALERT",
+				"FAN21_IL_TACH_ALERT", "FAN21_OL_TACH_ALERT",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+
+			gpio@17 {
+				compatible = "nxp,pca9555";
+				reg = <0x17>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-parent = <&sgpiom0>;
+				interrupts = <252 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-line-names =
+				"FCB_6_P1V0_POWER_FAIL", "FCB_6_P1V8_POWER_FAIL",
+				"FCB_6_P48V_ZONE0_POWER_FAIL", "FAN24_POWER_FAIL",
+				"FAN23_POWER_FAIL", "FAN22_POWER_FAIL",
+				"FAN21_POWER_FAIL", "",
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux44: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux45: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux46: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux47: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","BLADE_UART_SEL2","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","BLADE_UART_SEL0","","","",
+	/*M0-M7*/	"","","","","","BLADE_UART_SEL1","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","power-chassis-control","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","host0-ready",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","BAT_DETECT","","power-chassis-good","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","BLADE_UART_SEL3","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&sgpiom0 {
+	gpio-line-names =
+	/*"input pin","output pin"*/
+	/*A0 - A7*/
+	"PRSNT_MTIA_BLADE1_N","PWREN_MTIA_BLADE1_EN_N",
+	"PRSNT_MTIA_BLADE2_N","PWREN_MTIA_BLADE2_EN_N",
+	"PRSNT_MTIA_BLADE3_N","PWREN_MTIA_BLADE3_EN_N",
+	"PRSNT_MTIA_BLADE4_N","PWREN_MTIA_BLADE4_EN_N",
+	"PRSNT_MTIA_BLADE5_N","PWREN_MTIA_BLADE5_EN_N",
+	"PRSNT_MTIA_BLADE6_N","PWREN_MTIA_BLADE6_EN_N",
+	"PRSNT_MTIA_BLADE7_N","PWREN_MTIA_BLADE7_EN_N",
+	"PRSNT_MTIA_BLADE8_N","PWREN_MTIA_BLADE8_EN_N",
+	/*B0 - B7*/
+	"PRSNT_MTIA_BLADE9_N","PWREN_MTIA_BLADE9_EN_N",
+	"PRSNT_MTIA_BLADE10_N","PWREN_MTIA_BLADE10_EN_N",
+	"PRSNT_MTIA_BLADE11_N","PWREN_MTIA_BLADE11_EN_N",
+	"PRSNT_MTIA_BLADE12_N","PWREN_MTIA_BLADE12_EN_N",
+	"PRSNT_MTIA_BLADE13_N","PWREN_MTIA_BLADE13_EN_N",
+	"PRSNT_MTIA_BLADE14_N","PWREN_MTIA_BLADE14_EN_N",
+	"PRSNT_MTIA_BLADE15_N","PWREN_MTIA_BLADE15_EN_N",
+	"PRSNT_MTIA_BLADE16_N","PWREN_MTIA_BLADE16_EN_N",
+	/*C0 - C7*/
+	"PRSNT_NW_BLADE1_N","PWREN_NW_BLADE1_EN_N",
+	"PRSNT_NW_BLADE2_N","PWREN_NW_BLADE2_EN_N",
+	"PRSNT_NW_BLADE3_N","PWREN_NW_BLADE3_EN_N",
+	"PRSNT_NW_BLADE4_N","PWREN_NW_BLADE4_EN_N",
+	"PRSNT_NW_BLADE5_N","PWREN_NW_BLADE5_EN_N",
+	"PRSNT_NW_BLADE6_N","PWREN_NW_BLADE6_EN_N",
+	"PRSNT_FCB_1_N","PWREN_MTIA_BLADE1_HSC_EN_N",
+	"PRSNT_FCB_2_N","PWREN_MTIA_BLADE2_HSC_EN_N",
+	/*D0 - D7*/
+	"PRSNT_FCB_3_N","PWREN_MTIA_BLADE3_HSC_EN_N",
+	"PRSNT_FCB_4_N","PWREN_MTIA_BLADE4_HSC_EN_N",
+	"PRSNT_FCB_6_N","PWREN_MTIA_BLADE5_HSC_EN_N",
+	"PRSNT_FCB_5_N","PWREN_MTIA_BLADE6_HSC_EN_N",
+	"PWRGD_MTIA_BLADE1_PWROK_N","PWREN_MTIA_BLADE7_HSC_EN_N",
+	"PWRGD_MTIA_BLADE2_PWROK_N","PWREN_MTIA_BLADE8_HSC_EN_N",
+	"PWRGD_MTIA_BLADE3_PWROK_N","PWREN_MTIA_BLADE9_HSC_EN_N",
+	"PWRGD_MTIA_BLADE4_PWROK_N","PWREN_MTIA_BLADE10_HSC_EN_N",
+	/*E0 - E7*/
+	"PWRGD_MTIA_BLADE5_PWROK_N","PWREN_MTIA_BLADE11_HSC_EN_N",
+	"PWRGD_MTIA_BLADE6_PWROK_N","PWREN_MTIA_BLADE12_HSC_EN_N",
+	"PWRGD_MTIA_BLADE7_PWROK_N","PWREN_MTIA_BLADE13_HSC_EN_N",
+	"PWRGD_MTIA_BLADE8_PWROK_N","PWREN_MTIA_BLADE14_HSC_EN_N",
+	"PWRGD_MTIA_BLADE9_PWROK_N","PWREN_MTIA_BLADE15_HSC_EN_N",
+	"PWRGD_MTIA_BLADE10_PWROK_N","PWREN_MTIA_BLADE16_HSC_EN_N",
+	"PWRGD_MTIA_BLADE11_PWROK_N","PWREN_NW_BLADE1_HSC_EN_N",
+	"PWRGD_MTIA_BLADE12_PWROK_N","PWREN_NW_BLADE2_HSC_EN_N",
+	/*F0 - F7*/
+	"PWRGD_MTIA_BLADE13_PWROK_N","PWREN_NW_BLADE3_HSC_EN_N",
+	"PWRGD_MTIA_BLADE14_PWROK_N","PWREN_NW_BLADE4_HSC_EN_N",
+	"PWRGD_MTIA_BLADE15_PWROK_N","PWREN_NW_BLADE5_HSC_EN_N",
+	"PWRGD_MTIA_BLADE16_PWROK_N","PWREN_NW_BLADE6_HSC_EN_N",
+	"PWRGD_NW_BLADE1_PWROK_N","PWREN_SGPIO_FCB_2_EN_N",
+	"PWRGD_NW_BLADE2_PWROK_N","PWREN_SGPIO_FCB_1_EN_N",
+	"PWRGD_NW_BLADE3_PWROK_N","PWREN_SGPIO_FCB_4_EN_N",
+	"PWRGD_NW_BLADE4_PWROK_N","PWREN_SGPIO_FCB_3_EN_N",
+	/*G0 - G7*/
+	"PWRGD_NW_BLADE5_PWROK_N","PWREN_SGPIO_FCB_5_EN_N",
+	"PWRGD_NW_BLADE6_PWROK_N","PWREN_SGPIO_FCB_6_EN_N",
+	"PWRGD_FCB_1","FM_BMC_RST_RTCRST_R",
+	"PWRGD_FCB_2","",
+	"PWRGD_FCB_3","FM_MDIO_SW_SEL",
+	"PWRGD_FCB_4","FM_P24V_SMPWR_EN",
+	"PWRGD_FCB_6","",
+	"PWRGD_FCB_5","",
+	/*H0 - H7*/
+	"LEAK_DETECT_MTIA_BLADE1_N","",
+	"LEAK_DETECT_MTIA_BLADE2_N","",
+	"LEAK_DETECT_MTIA_BLADE3_N","",
+	"LEAK_DETECT_MTIA_BLADE4_N","",
+	"LEAK_DETECT_MTIA_BLADE5_N","",
+	"LEAK_DETECT_MTIA_BLADE6_N","",
+	"LEAK_DETECT_MTIA_BLADE7_N","ERR_INJECT_CMM_PWR_FAIL_N",
+	"LEAK_DETECT_MTIA_BLADE8_N","",
+	/*I0 - I7*/
+	"LEAK_DETECT_MTIA_BLADE9_N","RST_I2CRST_FCB_5_N",
+	"LEAK_DETECT_MTIA_BLADE10_N","RST_I2CRST_FCB_6_N",
+	"LEAK_DETECT_MTIA_BLADE11_N","RST_I2CRST_FCB_4_N",
+	"LEAK_DETECT_MTIA_BLADE12_N","RST_I2CRST_FCB_3_N",
+	"LEAK_DETECT_MTIA_BLADE13_N","RST_I2CRST_FCB_2_N",
+	"LEAK_DETECT_MTIA_BLADE14_N","RST_I2CRST_FCB_1_N",
+	"LEAK_DETECT_MTIA_BLADE15_N","BMC_READY",
+	"LEAK_DETECT_MTIA_BLADE16_N","FM_88E6393X_BIN_UPDATE_EN_N",
+	/*J0 - J7*/
+	"LEAK_DETECT_NW_BLADE1_N","WATER_VALVE_CLOSED_N",
+	"LEAK_DETECT_NW_BLADE2_N","",
+	"LEAK_DETECT_NW_BLADE3_N","",
+	"LEAK_DETECT_NW_BLADE4_N","",
+	"LEAK_DETECT_NW_BLADE5_N","",
+	"LEAK_DETECT_NW_BLADE6_N","",
+	"PWRGD_MTIA_BLADE1_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE2_HSC_PWROK_N","",
+	/*K0 - K7*/
+	"PWRGD_MTIA_BLADE3_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE4_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE5_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE6_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE7_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE8_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE9_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE10_HSC_PWROK_N","",
+	/*L0 - L7*/
+	"PWRGD_MTIA_BLADE11_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE12_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE13_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE14_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE15_HSC_PWROK_N","",
+	"PWRGD_MTIA_BLADE16_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE1_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE2_HSC_PWROK_N","",
+	/*M0 - M7*/
+	"PWRGD_NW_BLADE3_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE4_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE5_HSC_PWROK_N","",
+	"PWRGD_NW_BLADE6_HSC_PWROK_N","",
+	"RPU_READY","",
+	"IT_GEAR_RPU_LINK_N","",
+	"IT_GEAR_LEAK","",
+	"WATER_VALVE_CLOSED_N","",
+	/*N0 - N7*/
+	"VALVE_STATUS_0","",
+	"VALVE_STATUS_1","",
+	"PCA9555_IRQ1_N","",
+	"PCA9555_IRQ2_N","",
+	"CR_TOGGLE_BOOT_N","",
+	"IRQ_FCB_1_N","",
+	"IRQ_FCB_2_N","",
+	"CMM_CABLE_CARTRIDGE_PRSNT_BOT_N","",
+	/*O0 - O7*/
+	"CMM_CABLE_CARTRIDGE_PRSNT_TOP_N","",
+	"BOT_BCB_CABLE_PRSNT_N","",
+	"TOP_BCB_CABLE_PRSNT_N","",
+	"IRQ_FCB_3_N","",
+	"IRQ_FCB_4_N","",
+	"CHASSIS_LEAK0_DETECT_N","",
+	"CHASSIS_LEAK1_DETECT_N","",
+	"PCA9555_IRQ3_N","",
+	/*P0 - P7*/
+	"PCA9555_IRQ4_N","",
+	"PCA9555_IRQ5_N","",
+	"CMM_AC_PWR_BTN_N","",
+	"RPU_READY_SPARE","",
+	"IT_GEAR_LEAK_SPARE","",
+	"IT_GEAR_RPU_LINK_SPARE_N","",
+	"IRQ_FCB_6_N","",
+	"IRQ_FCB_5_N","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
new file mode 100644
index 000000000000..aafd1042b6e5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
@@ -0,0 +1,1339 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Minipack 100 BMC";
+	compatible = "facebook,minipack-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default serial aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+
+		/*
+		 * i2c switch 2-0070, pca9548, 8 child channels assigned
+		 * with bus number 16-23.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * i2c switch 8-0070, pca9548, 8 child channels assigned
+		 * with bus number 24-31.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * i2c switch 9-0070, pca9548, 8 child channels assigned
+		 * with bus number 32-39.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * i2c switch 11-0070, pca9548, 8 child channels assigned
+		 * with bus number 40-47.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * I2C Switch 24-0071 (channel #0 of 8-0070): 8 channels for
+		 * connecting to left PDB (Power Distribution Board).
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * I2C Switch 25-0072 (channel #1 of 8-0070): 8 channels for
+		 * connecting to right PDB (Power Distribution Board).
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * I2C Switch 26-0076 (channel #2 of 8-0070): 8 channels for
+		 * connecting to top FCM (Fan Control Module).
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * I2C Switch 27-0076 (channel #3 of 8-0070): 8 channels for
+		 * connecting to bottom FCM (Fan Control Module).
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * I2C Switch 40-0073 (channel #0 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #1 (1-based).
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * I2C Switch 41-0073 (channel #1 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #2 (1-based).
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * I2C Switch 42-0073 (channel #2 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #3 (1-based).
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * I2C Switch 43-0073 (channel #3 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #4 (1-based).
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * I2C Switch 44-0073 (channel #4 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #5 (1-based).
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * I2C Switch 45-0073 (channel #5 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #6 (1-based).
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * I2C Switch 46-0073 (channel #6 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #7 (1-based).
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * I2C Switch 47-0073 (channel #7 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #8 (1-based).
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw";
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+/*
+ * Both firmware flashes are 64MB on Minipack BMC.
+ */
+&fmc_flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * u-boot partition: 384KB.
+		 */
+		u-boot@0 {
+			reg = <0x0 0x60000>;
+			label = "u-boot";
+		};
+
+		/*
+		 * u-boot environment variables: 128KB.
+		 */
+		u-boot-env@60000 {
+			reg = <0x60000 0x20000>;
+			label = "env";
+		};
+
+		/*
+		 * FIT image: 55.5 MB.
+		 */
+		fit@80000 {
+			reg = <0x80000 0x3780000>;
+			label = "fit";
+		};
+
+		/*
+		 * "data0" partition (8MB) is reserved for persistent
+		 * data store.
+		 */
+		data0@3800000 {
+			reg = <0x3800000 0x800000>;
+			label = "data0";
+		};
+
+		/*
+		 * "flash0" partition (covering the entire flash) is
+		 * explicitly created to avoid breaking legacy applications.
+		 */
+		flash0@0 {
+			reg = <0x0 0x4000000>;
+			label = "flash0";
+		};
+	};
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <400000>;
+	multi-master;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/*
+	 * I2C Switch 2-0070 is connecting to SCM (System Controller
+	 * Module).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		/*
+		 * I2C Switch 8-0070 channel #0: connecting to left PDB
+		 * (Power Distribution Board).
+		 */
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #1: connecting to right PDB
+		 * (Power Distribution Board).
+		 */
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #2: connecting to top FCM
+		 * (Fan Control Module).
+		 */
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #3: connecting to bottom
+		 * FCM (Fan Control Module).
+		 */
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/*
+	 * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
+	 * (Switch Main Board).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		/*
+		 * I2C Switch 11-0070 channel #0: connecting to PIM
+		 * (Port Interface Module) #1 (1-based).
+		 */
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #1: connecting to PIM
+		 * (Port Interface Module) #2 (1-based).
+		 */
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #2: connecting to PIM
+		 * (Port Interface Module) #3 (1-based).
+		 */
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #3: connecting to PIM
+		 * (Port Interface Module) #4 (1-based).
+		 */
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #4: connecting to PIM
+		 * (Port Interface Module) #5 (1-based).
+		 */
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #5: connecting to PIM
+		 * (Port Interface Module) #6 (1-based).
+		 */
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #6: connecting to PIM
+		 * (Port Interface Module) #7 (1-based).
+		 */
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #7: connecting to PIM
+		 * (Port Interface Module) #8 (1-based).
+		 */
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
new file mode 100644
index 000000000000..72c84f31bdf6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -0,0 +1,982 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2025 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Santabarbara BMC";
+	compatible = "facebook,santabarbara-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c4mux0ch0;
+		i2c17 = &i2c4mux0ch1;
+		i2c18 = &i2c4mux0ch2;
+		i2c19 = &i2c4mux0ch3;
+		i2c20 = &i2c4mux0ch4;
+		i2c21 = &i2c4mux0ch5;
+		i2c22 = &i2c4mux0ch6;
+		i2c23 = &i2c4mux0ch7;
+		i2c24 = &i2c5mux0ch0;
+		i2c25 = &i2c5mux0ch1;
+		i2c26 = &i2c5mux0ch2;
+		i2c27 = &i2c5mux0ch3;
+		i2c28 = &i2c5mux1ch0;
+		i2c29 = &i2c5mux1ch1;
+		i2c30 = &i2c5mux1ch2;
+		i2c31 = &i2c5mux1ch3;
+		i2c32 = &i2c12mux0ch0;
+		i2c33 = &i2c12mux0ch1;
+		i2c34 = &i2c12mux0ch2;
+		i2c35 = &i2c12mux0ch3;
+		i2c36 = &i2c12mux0ch4;
+		i2c37 = &i2c12mux0ch5;
+		i2c38 = &i2c12mux0ch6;
+		i2c39 = &i2c12mux0ch7;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "power_blue";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p3v3_bmc_aux: regulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		status = "okay";
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+	status = "okay";
+};
+
+&adc1 {
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"rtc-battery-voltage-read-enable","","","BMC_READY",
+			"","led-identify","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"FM_MUX1_SEL_R","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"led-postcode-0","led-postcode-1",
+			"led-postcode-2","led-postcode-3",
+			"led-postcode-4","led-postcode-5",
+			"led-postcode-6","led-postcode-7",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"power-button","","reset-button","",
+			"led-power","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","power-host-control","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","",
+				"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1",
+				"FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"SPI_BMC_BIOS_ROM_IRQ0_R_N","","","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_R_N","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	// MB FRU
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <112 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_NIC_PPS_IN_OE_N","FM_NIC_PPS_OUT_OE_N",
+			"FM_CPU0_TRIGGERTSC_OE_N","FM_NIC_PPS_IN_MUX_OE_N",
+			"FM_CPU0_CORETYPE0","FM_CPU0_CORETYPE1",
+			"FM_CPU0_CORETYPE2","FM_NIC_PPS_OUT_MUX_OE",
+			"CLKMUX_INPUT_LOSS_U45_R_N","FM_CPU0_SP7R1",
+			"FM_CPU0_SP7R2","FM_CPU0_SP7R3",
+			"FM_CPU0_SP7R4","",
+			"FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R";
+	};
+
+	fan-controller@21 {
+		compatible = "maxim,max31790";
+		reg = <0x21>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <116 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_0A_N","FM_CBL_PRSNT_0B_N",
+			"FM_CBL_PRSNT_1A_N","FM_CBL_PRSNT_1B_N",
+			"FM_MODULE_PWRGD_0A","FM_MODULE_PWRGD_0B",
+			"CLKMUX_INPUT_LOSS_U88_R_N","FM_MODULE_PWRGD_1B",
+			"","",
+			"CLKMUX_INPUT_LOSS_U83_R_N","CLKMUX_INPUT_LOSS_U84_R_N",
+			"FM_P3V3_E1S_0_FAULT_R_N","FM_P3V3_E1S_1_FAULT_R_N",
+			"E1S_0_P12V_ADC_R_ALERT","E1S_1_P12V_ADC_R_ALERT";
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <114 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FM_CBL_PRSNT_2A_N","FM_CBL_PRSNT_2B_N",
+			"FM_CBL_PRSNT_3A_N","FM_CBL_PRSNT_3B_N",
+			"FM_CBL_PRSNT_4A_N","FM_CBL_PRSNT_4B_N",
+			"FM_P3V3_NIC_400G_FAULT_R_N","FM_MODULE_PWRGD_2B",
+			"OCP_SFF_P12V_ADC_R_ALERT","FM_MODULE_PWRGD_3B",
+			"FM_THERMAL_ALERT_R_N","FM_MODULE_PWRGD_4B",
+			"FM_CBL_PRSNT_OSFP_A_N","FM_CBL_PRSNT_OSFP_B_N",
+			"FM_JTAG_MCIO_MUX_S0","FM_JTAG_MCIO_MUX_S1";
+	};
+
+	gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&sgpiom0>;
+		interrupts = <118 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"FAN_0_PRSNT_R1_N","FAN_1_PRSNT_R1_N",
+			"FAN_2_PRSNT_R1_N","FAN_3_PRSNT_R1_N",
+			"P12V_FAN_0_ADC_ALERT","P12V_FAN_1_ADC_ALERT",
+			"P12V_FAN_2_ADC_ALERT","P12V_FAN_3_ADC_ALERT",
+			"P12V_FAN0_PWRGD_R","P12V_FAN1_PWRGD_R",
+			"P12V_FAN2_PWRGD_R","P12V_FAN3_PWRGD_R",
+			"","","","";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			// HPM Board ID EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			// SCM Board ID EEPROM
+			eeprom@53 {
+				compatible = "atmel,24c128";
+				reg = <0x53>;
+			};
+		};
+		i2c4mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			voltage-sensor@4a {
+				compatible = "ti,ads7830";
+				reg = <0x4a>;
+				vref-supply = <&p3v3_bmc_aux>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+
+			temperature-sensor@4e {
+				compatible = "ti,tmp75";
+				reg = <0x4e>;
+			};
+		};
+		i2c4mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c4mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@42 {
+				compatible = "ti,ina230";
+				reg = <0x42>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@46 {
+				compatible = "ti,ina230";
+				reg = <0x46>;
+				shunt-resistor = <2000>;
+			};
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+		i2c4mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// FIO FRU
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	// E1S BP FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c5mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c5mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c5mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux1ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+		};
+		i2c5mux1ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+		i2c5mux1ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+		i2c5mux1ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"P12V_E1S_ADC_ALERT","BUFF0_100M_LOSB_PLD",
+					"E1S_BP_SKU_ID0","E1S_BP_SKU_ID1",
+					"E1S_BP_SKU_ID2","E1S_BP_REV_ID0",
+					"E1S_BP_REV_ID1","E1S_BP_REV_ID2",
+					"P3V3_E1S_1_FAULT_R_N","P3V3_E1S_2_FAULT_R_N",
+					"P3V3_E1S_3_FAULT_R_N","P3V3_E1S_4_FAULT_R_N",
+					"P12V_E1S_1_FAULT_R_N","P12V_E1S_2_FAULT_R_N",
+					"P12V_E1S_3_FAULT_R_N","P12V_E1S_4_FAULT_R_N";
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// Rainbow0 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	// Rainbow2 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp75";
+		reg = <0x4b>;
+	};
+
+	// SCM FRU
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	// BSM FRU
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	// Rainbow3 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	// OCP NIC TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC FRU
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	// SWB FRU
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c12mux0ch0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+		};
+		i2c12mux0ch1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@42 {
+				compatible = "mps,mp2971";
+				reg = <0x42>;
+			};
+
+			power-monitor@43 {
+				compatible = "mps,mp2971";
+				reg = <0x43>;
+			};
+		};
+		i2c12mux0ch2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+				shunt-resistor = <2000>;
+			};
+		};
+		i2c12mux0ch3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			power-monitor@44 {
+				compatible = "ti,ina230";
+				reg = <0x44>;
+				shunt-resistor = <2000>;
+			};
+
+			power-monitor@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+				shunt-resistor = <2000>;
+			};
+		};
+		i2c12mux0ch4: i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			voltage-sensor@49 {
+				compatible = "ti,ads7830";
+				reg = <0x49>;
+			};
+		};
+		i2c12mux0ch5: i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c12mux0ch6: i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+		i2c12mux0ch7: i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	// Rainbow1 FRU
+	eeprom@52 {
+		compatible = "atmel,24c256";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&mac2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&mac3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	status = "okay";
+};
+
+&sgpiom0 {
+	ngpios = <128>;
+	bus-frequency = <2000000>;
+	gpio-line-names =
+	/*in - out - in - out */
+	/*A0-A3 line 0-7*/
+	"PDB1_HSC_PWR_OK","power-chassis-control",
+	"PDB2_HSC_PWR_OK","FM_MODULE_PWRGD_0A_OUT",
+	"PWRGD_P12V_MEM","FM_MODULE_PWRGD_0B_OUT",
+	"PWRGD_P12V_SCM","FM_MODULE_PWRGD_1B_OUT",
+	/*A4-A7 line 8-15*/
+	"PWRGD_P12V_FAN","FM_MODULE_PWRGD_2B_OUT",
+	"PWRGD_P5V_AUX","FM_MODULE_PWRGD_3B_OUT",
+	"power-chassis-good","FM_MODULE_PWRGD_4B_OUT",
+	"PWRGD_P1V8_LDO","FM_CBL_PRSNT_0A_N_OUT",
+	/*B0-B3 line 16-23*/
+	"PWRGD_P1V_LDO","FM_CBL_PRSNT_0B_N_OUT",
+	"PWRGD_PVDD33_S5","FM_CBL_PRSNT_1A_N_OUT",
+	"PWRGD_PVDD18_S5_P0","FM_CBL_PRSNT_1B_N_OUT",
+	"CPU0_SLP_S5_N","FM_CBL_PRSNT_2A_N_OUT",
+	/*B4-B7 line 24-31*/
+	"PWRGD_PVDDIO_MEM_S3_P0","FM_CBL_PRSNT_2B_N_OUT",
+	"CPU0_SLP_S3_N","FM_CBL_PRSNT_3A_N_OUT",
+	"FM_MODULE_PWRGD_1B","FM_CBL_PRSNT_3B_N_OUT",
+	"FM_MODULE_PWRGD_2B","FM_CBL_PRSNT_4A_N_OUT",
+	/*C0-C3 line 32-39*/
+	"FM_MODULE_PWRGD_3B","FM_CBL_PRSNT_4B_N_OUT",
+	"FM_MODULE_PWRGD_4B","P12V_FAN0_PWRGD_OUT",
+	"FM_MODULE_PWRGD_0B","P12V_FAN1_PWRGD_OUT",
+	"PWRGD_PVDDIO_P0","P12V_FAN2_PWRGD_OUT",
+	/*C4-C7 line 40-47*/
+	"PWRGD_PVDDCR_SOC_P0","P12V_FAN3_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU0_P0","P12V_FAN4_PWRGD_OUT",
+	"PWRGD_PVDDCR_CPU1_P0","P12V_FAN5_PWRGD_OUT",
+	"FM_CPU0_PWR_GOOD","P12V_FAN6_PWRGD_OUT",
+	/*D0-D3 line 48-55*/
+	"host0-ready","P12V_FAN7_PWRGD_OUT",
+	"FM_PWRGD_CPU0_PWROK","FAN_0_PRSNT_R1_N_OUT",
+	"FM_RST_CPU0_RESETL_N","FAN_1_PRSNT_R1_N_OUT",
+	"RST_CPU0_PERST0_R_N","FAN_2_PRSNT_R1_N_OUT",
+	/*D4-D7 line 56-63*/
+	"RST_CPU0_PERST1_R_N","FAN_3_PRSNT_R1_N_OUT",
+	"BIOS_POST_CMPLT","FAN_4_PRSNT_R1_N_OUT",
+	"","FAN_5_PRSNT_R1_N_OUT",
+	"","FAN_6_PRSNT_R1_N_OUT",
+	/*E0-E3 line 64-71*/
+	"FM_PWRGD_CHAD_CPU0","FAN_7_PRSNT_R1_N_OUT",
+	"FM_PWRGD_CHEH_CPU0","TRAY_SLOT_ID0_OUT",
+	"FM_PWRGD_CHIL_CPU0","TRAY_SLOT_ID1_OUT",
+	"FM_PWRGD_CHMP_CPU0","TRAY_SLOT_ID2_OUT",
+	/*E4-E7 line 72-79*/
+	"P12V_E1S_0_PWRGD","TRAY_SLOT_ID3_OUT",
+	"P12V_E1S_1_PWRGD","TRAY_SLOT_ID4_OUT",
+	"P3V3_E1S_0_PWRGD","SCM_JTAG_MUX_S0_R",
+	"P3V3_E1S_1_PWRGD","SCM_JTAG_MUX_S1_R",
+	/*F0-F3 line 80-87*/
+	"FM_MODULE_PWRGD_0A","BMC_SGPIO_READY",
+	"OCP_V3_1_P3V3_PLD_R_PWRGD","CPU0_SYS_RESET_N",
+	"P12V_OCP_V3_1_PLD_PWRGD","RST_CPU0_KBRST_N",
+	"PWRGD_OCP_SFF_PWR_GOOD","BIOS_DEBUG_MODE",
+	/*F4-F7 line 88-95*/
+	"","CLR_CMOS",
+	"","I3C_SPD_MUX_FORCE_SEL",
+	"","FM_JTAG_HOST_SEL",
+	"","TRAY_PRESENT_N",
+	/*G0-G3 line 96-103*/
+	"MB_REV_ID_0","UART_BMC_SEL0",
+	"MB_REV_ID_1","UART_BMC_SEL1",
+	"MB_REV_ID_2","SCM_USB_SEL",
+	"MB_SKU_ID_0","FORCE_ALL_PWRON",
+	/*G4-G7 line 104-111*/
+	"MB_SKU_ID_1","PASSWORD_CLEAR",
+	"MB_SKU_ID_2","",
+	"MB_SKU_ID_3","",
+	"","BIOS_DEBUG_MODE",
+	/*H0-H3 line 112-119*/
+	"FM_IOEXP_U538_INT_N","",
+	"FM_IOEXP_U539_INT_N","",
+	"FM_IOEXP_U540_INT_N","",
+	"FM_IOEXP_U541_INT_N","",
+	/*H4-H7 line 120-127*/
+	"FM_IOEXP_PDB2_U1003_INT_N","",
+	"","","","","","",
+	/*I0-I3 line 128-135*/
+	"","","","",
+	"PDB_IRQ_PMBUS_ALERT_ISO_R_N","",
+	"PDB_UV_ALERT_ISO_R_N","",
+	/*I4-I7 line 136-143*/
+	"P12V_SCM_ADC_ALERT","",
+	"CPU0_REGS_I2C_ALERT_N","",
+	"FM_RTC_ALERT_N","",
+	"APML_CPU0_ALERT_R_N","",
+	/*J0-J3 line 144-151*/
+	"SMB_RJ45_FIO_TMP_ALERT","",
+	"FM_SMB_ALERT_MCIO_0A_N","",
+	"I3C_MCIO_0B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_1A_N","",
+	/*J4-J7 line 152-159*/
+	"I3C_MCIO_1B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_2A_N","",
+	"I3C_MCIO_2B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_3A_N","",
+	/*K0-K3 line 160-167*/
+	"I3C_MCIO_3B_ALERT_ISO_R_N","",
+	"FM_SMB_ALERT_MCIO_4A_N","",
+	"I3C_MCIO_4B_ALERT_ISO_R_N","",
+	"","",
+	/*K4-K7 line 168-175*/
+	"","","","","","","","",
+	/*L0-L3 line 176-183*/
+	"FM_CPU0_THERMTRIP_N","",
+	"FM_CPU0_PROCHOT_N","",
+	"FM_CPU0_SMERR_N","",
+	"FM_PVDDCR_CPU0_P0_OCP_N","",
+	/*L4-L7 line 184-191*/
+	"FM_PVDDCR_CPU1_P0_OCP_N","",
+	"FM_PVDDCR_SOC_P0_OCP_N","",
+	"FM_OCP_PWRBRK_R_N","",
+	"PMIC_ERROR_N","",
+	/*M0-M3 line 192-199*/
+	"","","","","","","","",
+	/*M4-M7 line 200-207*/
+	"","","","","","","","",
+	/*N0-N3 line 208-215*/
+	"FM_PRSNT_CPU0_N","",
+	"OCP_SFF_PRSNT_N","",
+	"E1S_0_PRSNT_R_N","",
+	"E1S_BP_0_PRSNT_R_N","",
+	/*N4-N7 line 216-223*/
+	"E1S_BP_1_PRSNT_R_N","",
+	"E1S_BP_2_PRSNT_R_N","",
+	"E1S_BP_3_PRSNT_R_N","",
+	"PDB_PRSNT_J311_N","",
+	/*O0-O3 line 224-231*/
+	"PDB_PRSNT_J312_N","",
+	"PDB_PRSNT_J313_N","",
+	"PDB_PRSNT_J314_N","",
+	"PRSNT_RJ45_FIO_N_R","",
+	/*O4-O7 line 232-239*/
+	"PRSNT_LEAK_CABLE_1_R_N","",
+	"PRSNT_LEAK_CABLE_2_R_N","",
+	"PRSNT_HDT_N","",
+	"","",
+	/*P0-P3 line 240-247*/
+	"","","","","","","","",
+	/*P4-P7 line 248-255*/
+	"","","","","","","","";
+	status = "okay";
+};
+
+// BIOS Flash
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+	status = "okay";
+
+	flash@0 {
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <12000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		status = "okay";
+	};
+};
+
+// HOST BIOS Debug
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+// BMC Debug Console
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
new file mode 100644
index 000000000000..5d4c7d979f1e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+// Author: Vijay Khemka <vijaykhemka@fb.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook TiogaPass BMC";
+	compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+
+		/*
+		 * Hardcode the bus number of i2c switches' channels to
+		 * avoid breaking the legacy applications.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+	// Enable lpc clock
+	status = "okay";
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// SoL Host Console
+	status = "okay";
+};
+
+&uart3 {
+	// SoL BMC Console
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&kcs2 {
+	// BMC KCS channel 2
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	// BMC KCS channel 3
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"BMC_CPLD_FPGA_SEL","","","","","","","",
+	/*B0-B7*/	"","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK",
+			"IRQ_PVDDQ_GHJ_VRHOT_LVT3",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","",
+			"BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2",
+			"CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON",
+			"POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC",
+			"CPU1_PROCHOT_LVT3_ BMC",
+	/*F0-F7*/	"IRQ_PVDDQ_ABC_VRHOT_LVT3","",
+			"IRQ_PVCCIN_CPU0_VRHOT_LVC3",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3",
+			"IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","",
+	/*G0-G7*/	"CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP",
+			"CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE",
+	/*H0-H7*/	"LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2",
+			"LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5",
+			"LED_POST_CODE_6","LED_POST_CODE_7",
+	/*I0-I7*/	"CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3",
+			"FORCE_ADR","UV_ADR_TRIGGER_EN","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","",
+			"MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","",
+	/*M0-M7*/	"CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN",
+			"CPU0_THERMTRIP_LATCH_LVT3",
+			"CPU1_THERMTRIP_LATCH_LVT3","","",
+	/*N0-N7*/	"","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2",
+			"BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ",
+			"BMC_PWR_DEBUG","RST_RSMRST",
+	/*Q0-Q7*/	"","","","","UARTSW_LSB","UARTSW_MSB",
+			"POST_CARD_PRES_BMC","PE_BMC_WAKE",
+	/*R0-R7*/	"","","BMC_TCK_MUX_SEL","BMC_PRDY",
+			"BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0",
+			"SLT_CFG1",
+	/*S0-S7*/	"THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","",
+			"","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","BMC_FAULT","","",
+	/*V0-V7*/	"","","","FAST_PROCHOT_EN","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","GLOBAL_RST_WARN",
+			"CPU0_MEMABC_MEMHOT_LVT3_BMC",
+			"CPU0_MEMDEF_MEMHOT_LVT3_BMC",
+			"CPU1_MEMGHJ_MEMHOT_LVT3_BMC",
+			"CPU1_MEMKLM_MEMHOT_LVT3_BMC",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","",
+			"","","",
+	/*Z0-Z7*/	"","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","",
+			"","","","",
+	/*AA0-AA7*/	"CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT",
+			"SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET",
+			"","POST_COMPLETE",
+	/*AB0-AB7*/	"IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	use-ncsi;
+};
+
+&adc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	//Airmax Conn B, CPU0 PIROM, CPU1 PIROM
+};
+
+&i2c1 {
+	status = "okay";
+	//X24 Riser
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux26: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux27: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-mux@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux28: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux29: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux30: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux31: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+			};
+
+			i2c-switch@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+			};
+
+			i2c-switch@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+		};
+
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Mezz Management SMBus
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to Board ID EEPROM
+};
+
+&i2c4 {
+	status = "okay";
+	// BMC Debug Header
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	// CPU Voltage regulators
+	regulator@48 {
+		compatible = "infineon,pxe1610";
+		reg = <0x48>;
+	};
+	regulator@4a {
+		compatible = "infineon,pxe1610";
+		reg = <0x4a>;
+	};
+	regulator@50 {
+		compatible = "infineon,pxe1610";
+		reg = <0x50>;
+	};
+	regulator@52 {
+		compatible = "infineon,pxe1610";
+		reg = <0x52>;
+	};
+	regulator@58 {
+		compatible = "infineon,pxe1610";
+		reg = <0x58>;
+	};
+	regulator@5a {
+		compatible = "infineon,pxe1610";
+		reg = <0x5a>;
+	};
+	regulator@68 {
+		compatible = "infineon,pxe1610";
+		reg = <0x68>;
+	};
+	regulator@70 {
+		compatible = "infineon,pxe1610";
+		reg = <0x70>;
+	};
+	regulator@72 {
+		compatible = "infineon,pxe1610";
+		reg = <0x72>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	//HSC, AirMax Conn A
+	adm1278@45 {
+		compatible = "adi,adm1275";
+		reg = <0x45>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	//Mezz Sensor SMBus
+};
+
+&i2c9 {
+	status = "okay";
+	//USB Debug Connector
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
new file mode 100644
index 000000000000..97cd11c3d9a5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 100 BMC";
+	compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x2000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+&i2c7 {
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
new file mode 100644
index 000000000000..6624855d8ebd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge40.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 40 BMC";
+	compatible = "facebook,wedge40-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		     &pinctrl_pwm1_default
+		     &pinctrl_pwm6_default
+		     &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
new file mode 100644
index 000000000000..1d46eaee8656
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 400 BMC (64MB Datastore)";
+	compatible = "facebook,wedge400-data64-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			      <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x8000000>;
+			label = "flash1";
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdhci1 {
+	max-frequency = <25000000>;
+	/*
+	 * DMA mode needs to be disabled to avoid conflicts with UHCI
+	 * Controller in AST2500 SoC.
+	 */
+	sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
new file mode 100644
index 000000000000..ef0cfc51cda4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+
+#include "aspeed-bmc-facebook-wedge400-data64.dts"
+
+/ {
+	model = "Facebook Wedge 400 BMC";
+	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
+};
+
+&fmc_flash0 {
+	/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
new file mode 100644
index 000000000000..98fe0d6c8188
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook YAMP 100 BMC";
+	compatible = "facebook,yamp-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&mac1 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
new file mode 100644
index 000000000000..60b98d602e80
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -0,0 +1,1384 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemite 4 BMC";
+	compatible = "facebook,yosemite4-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+		serial7 = &uart8;
+		serial8 = &uart9;
+
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 7>;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			reg = <0>;
+			spi-max-frequency = <33000000>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart6 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&wdt2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst2_default>;
+	aspeed,reset-type = "system";
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT1_UART_SEL0","SLOT1_UART_SEL1",
+				"SLOT1_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT2_UART_SEL0","SLOT2_UART_SEL1",
+				"SLOT2_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT3_UART_SEL0","SLOT3_UART_SEL1",
+				"SLOT3_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT4_UART_SEL0","SLOT4_UART_SEL1",
+				"SLOT4_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT5_UART_SEL0","SLOT5_UART_SEL1",
+				"SLOT5_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT6_UART_SEL0","SLOT6_UART_SEL1",
+				"SLOT6_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT7_UART_SEL0","SLOT7_UART_SEL1",
+				"SLOT7_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	mctp-controller;
+	bus-frequency = <400000>;
+	multi-master;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9506";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9506";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "SLOT8_UART_SEL0","SLOT8_UART_SEL1",
+				"SLOT8_UART_SEL2","","","","","",
+				"","","","","","","","",
+				"","","","","","","","",
+				"","","","","","","","";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9506";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio@24 {
+		compatible = "nxp,pca9506";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	power-sensor@40 {
+		compatible = "adi,adm1281";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <500>;
+	};
+};
+
+&i2c8 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux17: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux18: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux19: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@71 {
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux20: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux21: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux22: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+
+		imux23: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			gpio@49 {
+				compatible = "nxp,pca9537";
+				reg = <0x49>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c128";
+				reg = <0x54>;
+			};
+		};
+	};
+};
+
+&i2c10 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	i2c-mux@74 {
+		compatible = "nxp,pca9544";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux28: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@24 {
+				compatible = "nxp,pca9506";
+				reg = <0x24>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names = "","","","",
+						  "NIC0_MAIN_PWR_EN",
+						  "NIC1_MAIN_PWR_EN",
+						  "NIC2_MAIN_PWR_EN",
+						  "NIC3_MAIN_PWR_EN",
+						  "","","","","","","","",
+						  "","","","","","","","",
+						  "","","","","","","","";
+			};
+		};
+
+		imux29: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	power-sensor@10 {
+		compatible = "adi,adm1272";
+		reg = <0x10>;
+	};
+
+	power-sensor@12 {
+		compatible = "adi,adm1272";
+		reg = <0x12>;
+	};
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "P48V_OCP_GPIO1", "P48V_OCP_GPIO2",
+				  "P48V_OCP_GPIO3", "FAN_BOARD_0_REVISION_0_R",
+				  "FAN_BOARD_0_REVISION_1_R",
+				  "FAN_BOARD_1_REVISION_0_R",
+				  "FAN_BOARD_1_REVISION_1_R", "RST_MUX_R_N",
+				  "RST_LED_CONTROL_FAN_BOARD_0_N",
+				  "RST_LED_CONTROL_FAN_BOARD_1_N",
+				  "RST_IOEXP_FAN_BOARD_0_N",
+				  "RST_IOEXP_FAN_BOARD_1_N",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_0_R",
+				  "PWRGD_LOAD_SWITCH_FAN_BOARD_1_R",
+				  "", "";
+	};
+
+	gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC_OCP_SLOT_ODD_GPIO1",
+				  "HSC_OCP_SLOT_ODD_GPIO2",
+				  "HSC_OCP_SLOT_ODD_GPIO3",
+				  "HSC_OCP_SLOT_EVEN_GPIO1",
+				  "HSC_OCP_SLOT_EVEN_GPIO2",
+				  "HSC_OCP_SLOT_EVEN_GPIO3",
+				  "ADC_TYPE_0_R", "ADC_TYPE_1_R",
+				  "MEDUSA_BOARD_REV_0", "MEDUSA_BOARD_REV_1",
+				  "MEDUSA_BOARD_REV_2", "MEDUSA_BOARD_TYPE",
+				  "DELTA_MODULE_TYPE", "P12V_HSC_TYPE",
+				  "", "";
+	};
+
+	gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "CARD_TYPE_SLOT1", "CARD_TYPE_SLOT2",
+				  "CARD_TYPE_SLOT3", "CARD_TYPE_SLOT4",
+				  "CARD_TYPE_SLOT5", "CARD_TYPE_SLOT6",
+				  "CARD_TYPE_SLOT7", "CARD_TYPE_SLOT8",
+				  "OC_P48V_HSC_0_N", "FLT_P48V_HSC_0_N",
+				  "OC_P48V_HSC_1_N", "FLT_P48V_HSC_1_N",
+				  "EN_P48V_AUX_0", "EN_P48V_AUX_1",
+				  "PWRGD_P12V_AUX_0", "PWRGD_P12V_AUX_1";
+	};
+
+	gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <98 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "HSC1_ALERT1_R_N", "HSC2_ALERT1_R_N",
+				  "HSC3_ALERT1_R_N", "HSC4_ALERT1_R_N",
+				  "HSC5_ALERT1_R_N", "HSC6_ALERT1_R_N",
+				  "HSC7_ALERT1_R_N", "HSC8_ALERT1_R_N",
+				  "HSC1_ALERT2_R_N", "HSC2_ALERT2_R_N",
+				  "HSC3_ALERT2_R_N", "HSC4_ALERT2_R_N",
+				  "HSC5_ALERT2_R_N", "HSC6_ALERT2_R_N",
+				  "HSC7_ALERT2_R_N", "HSC8_ALERT2_R_N";
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux34: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c128";
+				reg = <0x50>;
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+
+			rtc@6f {
+				compatible = "nuvoton,nct3018y";
+				reg = <0x6f>;
+			};
+
+			gpio@20 {
+				compatible = "nxp,pca9506";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@21 {
+				compatible = "nxp,pca9506";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@22 {
+				compatible = "nxp,pca9506";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio@23 {
+				compatible = "nxp,pca9506";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		imux35: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	bus-frequency = <100000>;
+	multi-master;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c14 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <400000>;
+	adc@1d {
+		compatible = "ti,adc128d818";
+		reg = <0x1d>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	adc@36 {
+		compatible = "ti,adc128d818";
+		reg = <0x36>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	adc@37 {
+		compatible = "ti,adc128d818";
+		reg = <0x37>;
+		ti,mode = /bits/ 8 <1>;
+	};
+
+	power-sensor@40 {
+		compatible = "ti,ina230";
+		reg = <0x40>;
+	};
+
+	power-sensor@41 {
+		compatible = "ti,ina230";
+		reg = <0x41>;
+	};
+
+	power-sensor@42 {
+		compatible = "ti,ina230";
+		reg = <0x42>;
+	};
+
+	power-sensor@43 {
+		compatible = "ti,ina230";
+		reg = <0x43>;
+	};
+
+	power-sensor@44 {
+		compatible = "ti,ina230";
+		reg = <0x44>;
+	};
+
+	temperature-sensor@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9544";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+
+		imux33: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			adc@35 {
+				compatible = "maxim,max11617";
+				reg = <0x35>;
+			};
+		};
+	};
+
+	i2c-mux@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		imux30: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			pwm@20 {
+				compatible = "maxim,max31790";
+				reg = <0x20>;
+			};
+
+			gpio@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+
+		imux31: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			adc@1f {
+				compatible = "ti,adc128d818";
+				reg = <0x1f>;
+				ti,mode = /bits/ 8 <1>;
+			};
+
+			pwm@20 {
+				compatible = "maxim,max31790";
+				reg = <0x20>;
+			};
+
+			gpio@22 {
+				compatible = "ti,tca6424";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pwm@2f {
+				compatible = "maxim,max31790";
+				reg = <0x2f>;
+			};
+
+			adc@33 {
+				compatible = "maxim,max11615";
+				reg = <0x33>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+
+			gpio@61 {
+				compatible = "nxp,pca9552";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+	multi-master;
+	bus-frequency = <400000>;
+
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9544";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		imux24: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux25: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux26: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		imux27: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mctp-controller;
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&adc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+			&pinctrl_adc15_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
new file mode 100644
index 000000000000..5143f85fbd70
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemitev2.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemitev2 BMC";
+	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
+	aliases {
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		// VOLATAGE SENSOR
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
+		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
+		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
+		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+&uart1 {
+	// Host1 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// Host2 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+
+};
+
+&uart3 {
+	// Host3 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	// Host4 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&vuart {
+	// Virtual UART
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+	mellanox,multi-host;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c1 {
+	//Host1 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb1@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	//Host2 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb3@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	//Host3 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb5@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c7 {
+	//Host4 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb7@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	//FRU EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	tmp421@4e {
+	//INLET TEMP
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	//OUTLET TEMP
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	//HSC
+	adm1278@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	//MEZZ_TEMP_SENSOR
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+	// Debug Card
+	multi-master;
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	//FSC
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
new file mode 100644
index 000000000000..839aad4ddd91
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge-4u.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-blueridge.dts"
+
+/ {
+	model = "Blueridge 4U";
+};
+
+&i2c3 {
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
new file mode 100644
index 000000000000..bc4c46235421
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts
@@ -0,0 +1,1688 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+	model = "Blueridge 2U";
+	compatible = "ibm,blueridge-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+			no-map;
+		};
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+
+		i2c2mux0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		led-bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			label = "fan2-presence";
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			label = "fan3-presence";
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			label = "fan4-presence";
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			label = "fan5-presence";
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"bmc-management-ready","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+			"factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","",
+			"",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","",
+			"",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+			"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3-mux-oe-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		line-name = "I2C3_MUX_OE_N";
+		output-high;
+	};
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	gpio@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard0-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard0-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard3-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard3-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard4-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard4-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	temperature-sensor@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	led-controller@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "pcieslot0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "pcieslot1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "pcieslot2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "pcieslot3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "pcieslot4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "cpu1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "cpu-vrm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "lcd-russel";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm24";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm25";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm26";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm27";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm28";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm29";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm30";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm31";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "planar";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "cpu0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "dasd-pyramid0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "dasd-pyramid1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "dasd-pyramid2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "cpu0-vrm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "rtc-battery";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "base-blyth";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "pcieslot6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "pcieslot7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "pcieslot8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "pcieslot9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "pcieslot10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "pcieslot11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "tpm-wilson";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	humidity-sensor@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	pwm@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "front-sys-id0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "front-check-log0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "front-enc-fault1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "front-sys-pwron0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "fan0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "fan1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "fan2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "fan3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "fan4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "fan5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	pressure-sensor@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pmic@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	temperature-sensor@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	temperature-sensor@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard10-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard10-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "nvme16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "nvme17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "nvme18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "nvme19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "nvme20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "nvme21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "nvme22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "nvme23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
new file mode 100644
index 000000000000..2f5d4075a64a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bonnell";
+	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	tmp435@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	pca9849@75 {
+		compatible = "nxp,pca9849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme3";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme2";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-dual.dtsi"
+
+&cfam0_i2c10 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c11 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c12 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
+
+&cfam0_i2c13 {
+	eeprom@50 {
+		compatible = "atmel,at30tse004a";
+		reg = <0x50>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
new file mode 100644
index 000000000000..9f144f527f03
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -0,0 +1,4046 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Everest";
+	compatible = "ibm,everest-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		sbefifo500 = &sbefifo500;
+		sbefifo501 = &sbefifo501;
+		sbefifo510 = &sbefifo510;
+		sbefifo511 = &sbefifo511;
+		sbefifo512 = &sbefifo512;
+		sbefifo513 = &sbefifo513;
+		sbefifo514 = &sbefifo514;
+		sbefifo515 = &sbefifo515;
+		sbefifo602 = &sbefifo602;
+		sbefifo603 = &sbefifo603;
+		sbefifo610 = &sbefifo610;
+		sbefifo611 = &sbefifo611;
+		sbefifo614 = &sbefifo614;
+		sbefifo615 = &sbefifo615;
+		sbefifo616 = &sbefifo616;
+		sbefifo617 = &sbefifo617;
+		sbefifo700 = &sbefifo700;
+		sbefifo701 = &sbefifo701;
+		sbefifo710 = &sbefifo710;
+		sbefifo711 = &sbefifo711;
+		sbefifo712 = &sbefifo712;
+		sbefifo713 = &sbefifo713;
+		sbefifo714 = &sbefifo714;
+		sbefifo715 = &sbefifo715;
+		sbefifo802 = &sbefifo802;
+		sbefifo803 = &sbefifo803;
+		sbefifo810 = &sbefifo810;
+		sbefifo811 = &sbefifo811;
+		sbefifo814 = &sbefifo814;
+		sbefifo815 = &sbefifo815;
+		sbefifo816 = &sbefifo816;
+		sbefifo817 = &sbefifo817;
+
+		scom500 = &scom500;
+		scom501 = &scom501;
+		scom510 = &scom510;
+		scom511 = &scom511;
+		scom512 = &scom512;
+		scom513 = &scom513;
+		scom514 = &scom514;
+		scom515 = &scom515;
+		scom602 = &scom602;
+		scom603 = &scom603;
+		scom610 = &scom610;
+		scom611 = &scom611;
+		scom614 = &scom614;
+		scom615 = &scom615;
+		scom616 = &scom616;
+		scom617 = &scom617;
+		scom700 = &scom700;
+		scom701 = &scom701;
+		scom710 = &scom710;
+		scom711 = &scom711;
+		scom712 = &scom712;
+		scom713 = &scom713;
+		scom714 = &scom714;
+		scom715 = &scom715;
+		scom802 = &scom802;
+		scom803 = &scom803;
+		scom810 = &scom810;
+		scom811 = &scom811;
+		scom814 = &scom814;
+		scom815 = &scom815;
+		scom816 = &scom816;
+		scom817 = &scom817;
+
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/   "","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca1: pca9552@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca2: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c01: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c01-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c01-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c02: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c02-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c02-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c03: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c03-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c03-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca3: pca9552@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c04: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c04-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c04-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c05: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c05-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c05-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c06: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c06-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c06-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c07: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c07-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c07-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			};
+
+			pca_cable_card_c08: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c08-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c08-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c09: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c09-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c09-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c10: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c11: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c11-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c11-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	pca_pcie_slot: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			label = "pcieslot-c01";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot-c02";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot-c03";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot-c04";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcieslot-c05";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcieslot-c06";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcieslot-c07";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcieslot-c08";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot-c09";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot-c10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot-c11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	pic0_dimm: pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_dimm: pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic2_dimm: pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm32";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm33";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm34";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm35";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm36";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm37";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm38";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm39";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm40";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm41";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm42";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm43";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm44";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm45";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm46";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm47";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic3_dimm: pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm48";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm49";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm50";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm51";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm52";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm53";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm54";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm55";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm56";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm57";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm58";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm59";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm60";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm61";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm62";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm63";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic0_vrm_misc: pca9552@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "tpm";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu3-c61";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu0-c14";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector3";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector4";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector5";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm4";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm5";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm6";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm7";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_vrm_misc: pca9552@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "dasd-backplane";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "power-distribution";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu1-c19";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu2-c56";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector0";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector2";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm0";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm1";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm2";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm3";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm8";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm9";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm10";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm11";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			pca_oppanel: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "front-sys-id0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "front-check-log0";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "front-enc-fault1";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "front-sys-pwron0";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			max31785@52 {
+				compatible = "maxim,max31785a";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x52>;
+
+				fan@0 {
+					compatible = "pmbus-fan";
+					reg = <0>;
+					tach-pulses = <2>;
+				};
+
+				fan@1 {
+					compatible = "pmbus-fan";
+					reg = <1>;
+					tach-pulses = <2>;
+				};
+
+				fan@2 {
+					compatible = "pmbus-fan";
+					reg = <2>;
+					tach-pulses = <2>;
+				};
+
+				fan@3 {
+					compatible = "pmbus-fan";
+					reg = <3>;
+					tach-pulses = <2>;
+				};
+			};
+
+			pca_fan_nvme: pca9552@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "nvme0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "nvme1";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "nvme2";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "nvme3";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					label = "nvme4";
+					reg = <4>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					label = "nvme5";
+					reg = <5>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					label = "nvme6";
+					reg = <6>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					label = "nvme7";
+					reg = <7>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					label = "nvme8";
+					reg = <8>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					label = "nvme9";
+					reg = <9>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@10 {
+					label = "fan0";
+					reg = <10>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@11 {
+					label = "fan1";
+					reg = <11>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@12 {
+					label = "fan2";
+					reg = <12>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@13 {
+					label = "fan3";
+					reg = <13>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: pca9552@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-quad.dtsi"
+
+&fsi_hub0 {
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom500: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo500: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom501: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo501: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom510: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo510: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom511: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo511: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom512: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo512: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom513: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo513: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom514: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo514: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom515: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo515: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ4: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub4: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom602: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo602: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom603: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo603: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom610: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo610: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom611: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo611: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom614: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo614: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom615: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo615: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom616: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo616: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom617: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo617: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ5: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub5: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom700: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo700: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom701: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo701: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom710: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo710: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom711: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo711: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom712: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo712: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom713: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo713: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom714: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo714: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom715: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo715: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ6: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub6: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom802: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo802: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom803: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo803: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom810: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo810: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom811: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo811: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom814: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo814: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom815: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo815: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom816: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo816: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom817: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo817: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ7: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub7: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ4 {
+	reg = <5>;
+};
+
+&fsi_occ5 {
+	reg = <6>;
+};
+
+&fsi_occ6 {
+	reg = <7>;
+};
+
+&fsi_occ7 {
+	reg = <8>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
new file mode 100644
index 000000000000..9a43fc7bcebe
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts
@@ -0,0 +1,3903 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include "aspeed-g6.dtsi"
+#include "ibm-power11-quad.dtsi"
+
+/ {
+	model = "Fuji";
+	compatible = "ibm,fuji-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		sbefifo500 = &sbefifo500;
+		sbefifo501 = &sbefifo501;
+		sbefifo510 = &sbefifo510;
+		sbefifo511 = &sbefifo511;
+		sbefifo512 = &sbefifo512;
+		sbefifo513 = &sbefifo513;
+		sbefifo514 = &sbefifo514;
+		sbefifo515 = &sbefifo515;
+		sbefifo602 = &sbefifo602;
+		sbefifo603 = &sbefifo603;
+		sbefifo610 = &sbefifo610;
+		sbefifo611 = &sbefifo611;
+		sbefifo614 = &sbefifo614;
+		sbefifo615 = &sbefifo615;
+		sbefifo616 = &sbefifo616;
+		sbefifo617 = &sbefifo617;
+		sbefifo700 = &sbefifo700;
+		sbefifo701 = &sbefifo701;
+		sbefifo710 = &sbefifo710;
+		sbefifo711 = &sbefifo711;
+		sbefifo712 = &sbefifo712;
+		sbefifo713 = &sbefifo713;
+		sbefifo714 = &sbefifo714;
+		sbefifo715 = &sbefifo715;
+		sbefifo802 = &sbefifo802;
+		sbefifo803 = &sbefifo803;
+		sbefifo810 = &sbefifo810;
+		sbefifo811 = &sbefifo811;
+		sbefifo814 = &sbefifo814;
+		sbefifo815 = &sbefifo815;
+		sbefifo816 = &sbefifo816;
+		sbefifo817 = &sbefifo817;
+
+		scom500 = &scom500;
+		scom501 = &scom501;
+		scom510 = &scom510;
+		scom511 = &scom511;
+		scom512 = &scom512;
+		scom513 = &scom513;
+		scom514 = &scom514;
+		scom515 = &scom515;
+		scom602 = &scom602;
+		scom603 = &scom603;
+		scom610 = &scom610;
+		scom611 = &scom611;
+		scom614 = &scom614;
+		scom615 = &scom615;
+		scom616 = &scom616;
+		scom617 = &scom617;
+		scom700 = &scom700;
+		scom701 = &scom701;
+		scom710 = &scom710;
+		scom711 = &scom711;
+		scom712 = &scom712;
+		scom713 = &scom713;
+		scom714 = &scom714;
+		scom715 = &scom715;
+		scom802 = &scom802;
+		scom803 = &scom803;
+		scom810 = &scom810;
+		scom811 = &scom811;
+		scom814 = &scom814;
+		scom815 = &scom815;
+		scom816 = &scom816;
+		scom817 = &scom817;
+
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: region@b3d00000 {
+			reg = <0xb3d00000 0x100000>;
+			no-map;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			reg = <0xb4000000 0x04000000>; /* 64M */
+			no-map;
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+			no-map;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			label = "fan0-presence";
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			label = "fan1-presence";
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			label = "fan2-presence";
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			label = "fan3-presence";
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"bmc-management-ready","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","",
+			"factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","",
+			"","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","",
+			"I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	led-controller@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+
+	led-controller@63 {
+		compatible = "nxp,pca9552";
+		reg = <0x63>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-vrm-c12",
+			"presence-vrm-c13",
+			"presence-vrm-c15",
+			"presence-vrm-c16",
+			"presence-vrm-c17",
+			"presence-vrm-c18",
+			"presence-vrm-c20",
+			"presence-vrm-c21",
+			"presence-vrm-c54",
+			"presence-vrm-c55",
+			"presence-vrm-c57",
+			"presence-vrm-c58",
+			"presence-vrm-c59",
+			"presence-vrm-c60",
+			"presence-vrm-c62",
+			"presence-vrm-c63";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	led-controller@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c01-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c01-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c02-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c02-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c03-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c03-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	led-controller@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c04-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c04-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c05-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c05-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c06-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c06-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			led-controller@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c07-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c07-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c08-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c08-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			led-controller@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c09-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c09-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			led-controller@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c10-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c10-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			led-controller@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "cablecard-c11-cxp-top";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "cablecard-c11-cxp-bot";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	led-controller@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "pcieslot-c01";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "pcieslot-c02";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "pcieslot-c03";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "pcieslot-c04";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "pcieslot-c05";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "pcieslot-c06";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "pcieslot-c07";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "pcieslot-c08";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "pcieslot-c09";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "pcieslot-c10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "pcieslot-c11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	led-controller@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm16";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm17";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm18";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm20";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm21";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm22";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm23";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm24";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm25";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm26";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm27";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm28";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm29";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm30";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm31";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm32";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm33";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm34";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm35";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm36";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm37";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm38";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm39";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm40";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm41";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm42";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm43";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm44";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm45";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm46";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm47";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "ddimm48";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "ddimm49";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "ddimm50";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "ddimm51";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "ddimm52";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "ddimm53";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "ddimm54";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			reg = <7>;
+			default-state = "keep";
+			label = "ddimm55";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "ddimm56";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "ddimm57";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "ddimm58";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "ddimm59";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "ddimm60";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "ddimm61";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "ddimm62";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "ddimm63";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "planar";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "tpm";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "cpu3-c61";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "cpu0-c14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "opencapi-connector3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "opencapi-connector4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "opencapi-connector5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "vrm4";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "vrm5";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "vrm6";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "vrm7";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "vrm12";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "vrm13";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "vrm14";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "vrm15";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	led-controller@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			reg = <0>;
+			default-state = "keep";
+			label = "dasd-backplane";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			reg = <1>;
+			default-state = "keep";
+			label = "power-distribution";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			default-state = "keep";
+			label = "cpu1-c19";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			reg = <3>;
+			default-state = "keep";
+			label = "cpu2-c56";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			reg = <4>;
+			default-state = "keep";
+			label = "opencapi-connector0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			reg = <5>;
+			default-state = "keep";
+			label = "opencapi-connector1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			reg = <6>;
+			default-state = "keep";
+			label = "opencapi-connector2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			reg = <8>;
+			default-state = "keep";
+			label = "vrm0";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			reg = <9>;
+			default-state = "keep";
+			label = "vrm1";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@a {
+			reg = <10>;
+			default-state = "keep";
+			label = "vrm2";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@b {
+			reg = <11>;
+			default-state = "keep";
+			label = "vrm3";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@c {
+			reg = <12>;
+			default-state = "keep";
+			label = "vrm8";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@d {
+			reg = <13>;
+			default-state = "keep";
+			label = "vrm9";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@e {
+			reg = <14>;
+			default-state = "keep";
+			label = "vrm10";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@f {
+			reg = <15>;
+			default-state = "keep";
+			label = "vrm11";
+			retain-state-shutdown;
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pmic@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+		reset-gpio = <&gpio0 ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+
+		i2c8mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	lcd-controller@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "front-sys-id0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "front-check-log0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					default-state = "keep";
+					label = "front-enc-fault1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					reg = <3>;
+					default-state = "keep";
+					label = "front-sys-pwron0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pwm@52 {
+				compatible = "maxim,max31785a";
+				reg = <0x52>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					reg = <0>;
+					default-state = "keep";
+					label = "nvme0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					reg = <1>;
+					default-state = "keep";
+					label = "nvme1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					reg = <2>;
+					default-state = "keep";
+					label = "nvme2";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					reg = <3>;
+					default-state = "keep";
+					label = "nvme3";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					reg = <4>;
+					default-state = "keep";
+					label = "nvme4";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					reg = <5>;
+					default-state = "keep";
+					label = "nvme5";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					reg = <6>;
+					default-state = "keep";
+					label = "nvme6";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					reg = <7>;
+					default-state = "keep";
+					label = "nvme7";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					reg = <8>;
+					default-state = "keep";
+					label = "nvme8";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					reg = <9>;
+					default-state = "keep";
+					label = "nvme9";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@a {
+					reg = <10>;
+					default-state = "keep";
+					label = "fan0";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@b {
+					reg = <11>;
+					default-state = "keep";
+					label = "fan1";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@c {
+					reg = <12>;
+					default-state = "keep";
+					label = "fan2";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@d {
+					reg = <13>;
+					default-state = "keep";
+					label = "fan3";
+					retain-state-shutdown;
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: led-controller@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&fsi_hub0 {
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom500: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo500: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom501: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo501: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom510: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo510: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom511: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo511: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom512: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo512: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom513: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo513: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom514: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo514: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom515: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo515: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom602: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo602: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom603: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo603: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom610: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo610: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom611: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo611: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom614: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo614: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom615: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo615: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom616: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo616: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom617: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo617: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom700: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo700: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom701: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo701: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom710: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo710: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom711: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo711: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom712: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo712: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom713: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo713: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom714: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo714: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom715: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo715: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom802: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo802: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom803: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo803: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom810: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo810: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom811: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo811: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom814: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo814: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom815: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo815: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom816: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo816: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom817: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo817: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
new file mode 100644
index 000000000000..f5f5b18c113a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-1s4u.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier-4u.dts"
+
+/ {
+	model = "Rainier 1S4U";
+};
+
+&max {
+	/delete-node/ fan3;
+	/delete-node/ fan5;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
new file mode 100644
index 000000000000..342546a3c0f5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier-4u.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier.dts"
+
+/ {
+	model = "Rainier 4U";
+};
+
+&i2c3 {
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
new file mode 100644
index 000000000000..c5fb5d410001
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -0,0 +1,1737 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Rainier 2U";
+	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	i2c2mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+
+		i2c2mux0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		led-bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","led-bmc-ingraham0","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+	"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3-mux-oe-n-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "I2C3_MUX_OE_N";
+	};
+
+	usb-power-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca_pres1: tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	pca_pres1: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard0-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard0-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard3-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard3-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard4-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard4-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	tmp275@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "pcieslot0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "pcieslot1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "cpu1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu-vrm1";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "lcd-russel";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "cpu0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "dasd-pyramid0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "dasd-pyramid1";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "dasd-pyramid2";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu0-vrm0";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "rtc-battery";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "base-blyth";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot6";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot7";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot8";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "pcieslot9";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pcieslot10";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pcieslot11";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "tpm-wilson";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	max: max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+
+		fan2: fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+		};
+
+		fan3: fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+		};
+
+		fan4: fan@4 {
+			compatible = "pmbus-fan";
+			reg = <4>;
+			tach-pulses = <2>;
+		};
+
+		fan5: fan@5 {
+			compatible = "pmbus-fan";
+			reg = <5>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "fan0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "fan1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "fan2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "fan3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "fan4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "fan5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca_pres3: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "P10_DCM0_PRES", "P10_DCM1_PRES",
+			"", "", "", "", "PRESENT_VRM_DCM0_N", "PRESENT_VRM_DCM1_N",
+			"power-config-full-load", "";
+	};
+
+	pca_pres2: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme8";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme9";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme10";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme11";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme12";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme13";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme14";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme15";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power10-quad.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
new file mode 100644
index 000000000000..dbadba8eb698
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
@@ -0,0 +1,6086 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2024 IBM Corp.
+/dts-v1/;
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/i2c/i2c.h>
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "IBM SBP1";
+	compatible = "ibm,sbp1-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "LED_BMC_READY";
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			retain-state-suspended;
+			panic-indicator;
+		};
+
+		led-id-tpm {
+			label = "LED_ID_TPM";
+			gpios = <&smb_pex_vr_ctrl 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-bat {
+			label = "LED_ID_BAT";
+			gpios = <&smb_pex_vr_ctrl 16 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port2 {
+			label = "LED_ID_MGMT_PORT2";
+			gpios = <&smb_pex_vr_ctrl 17 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-mgmt-port1 {
+			label = "LED_ID_MGMT_PORT1";
+			gpios = <&smb_pex_vr_ctrl 18 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port1 {
+			label = "LED_ID_NIC1_PORT1";
+			gpios = <&smb_pex_vr_ctrl 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic1-port2 {
+			label = "LED_ID_NIC1_PORT2";
+			gpios = <&smb_pex_vr_ctrl 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port1 {
+			label = "LED_ID_NIC2_PORT1";
+			gpios = <&smb_pex_vr_ctrl 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-nic2-port2 {
+			label = "LED_ID_NIC2_PORT2";
+			gpios = <&smb_pex_vr_ctrl 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd2 {
+			label = "LED_ID_M2_SSD2";
+			gpios = <&smb_pex_vr_ctrl 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-m2-ssd1 {
+			label = "LED_ID_M2_SSD1";
+			gpios = <&smb_pex_vr_ctrl 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dwr-frnt-p {
+			label = "LED_ID_DWR_FRNT_P";
+			gpios = <&smb_svc_pex_cpu3_led 37 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-frnt {
+			label = "LED_PWR_DWR_FRNT";
+			gpios = <&smb_svc_pex_cpu3_led 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-pwr-dwr-back {
+			label = "LED_PWR_DWR_BACK";
+			gpios = <&smb_pex_vr_ctrl 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-dwr-back-p {
+			label = "LED_ID_DWR_BACK_P";
+			gpios = <&smb_pex_vr_ctrl 35 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+
+			default-state = "on";
+			retain-state-suspended;
+			retain-state-shutdown;
+		};
+
+		led-id-cpu0 {
+			label = "LED_ID_CPU0";
+			gpios = <&smb_svc_pex_cpu0_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu1 {
+			label = "LED_ID_CPU1";
+			gpios = <&smb_svc_pex_cpu1_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu2 {
+			label = "LED_ID_CPU2";
+			gpios = <&smb_svc_pex_cpu2_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-cpu3 {
+			label = "LED_ID_CPU3";
+			gpios = <&smb_svc_pex_cpu3_led 39 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e2 {
+			label = "LED_ID_DIMM_C0E2";
+			gpios = <&smb_svc_pex_cpu0_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0e1 {
+			label = "LED_ID_DIMM_C0E1";
+			gpios = <&smb_svc_pex_cpu0_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f2 {
+			label = "LED_ID_DIMM_C0F2";
+			gpios = <&smb_svc_pex_cpu0_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0f1 {
+			label = "LED_ID_DIMM_C0F1";
+			gpios = <&smb_svc_pex_cpu0_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g2 {
+			label = "LED_ID_DIMM_C0G2";
+			gpios = <&smb_svc_pex_cpu0_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0g1 {
+			label = "LED_ID_DIMM_C0G1";
+			gpios = <&smb_svc_pex_cpu0_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h2 {
+			label = "LED_ID_DIMM_C0H2";
+			gpios = <&smb_svc_pex_cpu0_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0h1 {
+			label = "LED_ID_DIMM_C0H1";
+			gpios = <&smb_svc_pex_cpu0_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a2 {
+			label = "LED_ID_DIMM_C0A2";
+			gpios = <&smb_svc_pex_cpu0_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0a1 {
+			label = "LED_ID_DIMM_C0A1";
+			gpios = <&smb_svc_pex_cpu0_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b2 {
+			label = "LED_ID_DIMM_C0B2";
+			gpios = <&smb_svc_pex_cpu0_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0b1 {
+			label = "LED_ID_DIMM_C0B1";
+			gpios = <&smb_svc_pex_cpu0_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c2 {
+			label = "LED_ID_DIMM_C0C2";
+			gpios = <&smb_svc_pex_cpu0_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0c1 {
+			label = "LED_ID_DIMM_C0C1";
+			gpios = <&smb_svc_pex_cpu0_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d2 {
+			label = "LED_ID_DIMM_C0D2";
+			gpios = <&smb_svc_pex_cpu0_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c0d1 {
+			label = "LED_ID_DIMM_C0D1";
+			gpios = <&smb_svc_pex_cpu0_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e2 {
+			label = "LED_ID_DIMM_C1E2";
+			gpios = <&smb_svc_pex_cpu1_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1e1 {
+			label = "LED_ID_DIMM_C1E1";
+			gpios = <&smb_svc_pex_cpu1_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f2 {
+			label = "LED_ID_DIMM_C1F2";
+			gpios = <&smb_svc_pex_cpu1_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1f1 {
+			label = "LED_ID_DIMM_C1F1";
+			gpios = <&smb_svc_pex_cpu1_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g2 {
+			label = "LED_ID_DIMM_C1G2";
+			gpios = <&smb_svc_pex_cpu1_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1g1 {
+			label = "LED_ID_DIMM_C1G1";
+			gpios = <&smb_svc_pex_cpu1_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h2 {
+			label = "LED_ID_DIMM_C1H2";
+			gpios = <&smb_svc_pex_cpu1_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1h1 {
+			label = "LED_ID_DIMM_C1H1";
+			gpios = <&smb_svc_pex_cpu1_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a2 {
+			label = "LED_ID_DIMM_C1A2";
+			gpios = <&smb_svc_pex_cpu1_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1a1 {
+			label = "LED_ID_DIMM_C1A1";
+			gpios = <&smb_svc_pex_cpu1_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b2 {
+			label = "LED_ID_DIMM_C1B2";
+			gpios = <&smb_svc_pex_cpu1_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1b1 {
+			label = "LED_ID_DIMM_C1B1";
+			gpios = <&smb_svc_pex_cpu1_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c2 {
+			label = "LED_ID_DIMM_C1C2";
+			gpios = <&smb_svc_pex_cpu1_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1c1 {
+			label = "LED_ID_DIMM_C1C1";
+			gpios = <&smb_svc_pex_cpu1_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d2 {
+			label = "LED_ID_DIMM_C1D2";
+			gpios = <&smb_svc_pex_cpu1_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c1d1 {
+			label = "LED_ID_DIMM_C1D1";
+			gpios = <&smb_svc_pex_cpu1_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e2 {
+			label = "LED_ID_DIMM_C2E2";
+			gpios = <&smb_svc_pex_cpu2_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2e1 {
+			label = "LED_ID_DIMM_C2E1";
+			gpios = <&smb_svc_pex_cpu2_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f2 {
+			label = "LED_ID_DIMM_C2F2";
+			gpios = <&smb_svc_pex_cpu2_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2f1 {
+			label = "LED_ID_DIMM_C2F1";
+			gpios = <&smb_svc_pex_cpu2_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g2 {
+			label = "LED_ID_DIMM_C2G2";
+			gpios = <&smb_svc_pex_cpu2_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2g1 {
+			label = "LED_ID_DIMM_C2G1";
+			gpios = <&smb_svc_pex_cpu2_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h2 {
+			label = "LED_ID_DIMM_C2H2";
+			gpios = <&smb_svc_pex_cpu2_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2h1 {
+			label = "LED_ID_DIMM_C2H1";
+			gpios = <&smb_svc_pex_cpu2_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a2 {
+			label = "LED_ID_DIMM_C2A2";
+			gpios = <&smb_svc_pex_cpu2_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2a1 {
+			label = "LED_ID_DIMM_C2A1";
+			gpios = <&smb_svc_pex_cpu2_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b2 {
+			label = "LED_ID_DIMM_C2B2";
+			gpios = <&smb_svc_pex_cpu2_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2b1 {
+			label = "LED_ID_DIMM_C2B1";
+			gpios = <&smb_svc_pex_cpu2_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c2 {
+			label = "LED_ID_DIMM_C2C2";
+			gpios = <&smb_svc_pex_cpu2_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2c1 {
+			label = "LED_ID_DIMM_C2C1";
+			gpios = <&smb_svc_pex_cpu2_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d2 {
+			label = "LED_ID_DIMM_C2D2";
+			gpios = <&smb_svc_pex_cpu2_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c2d1 {
+			label = "LED_ID_DIMM_C2D1";
+			gpios = <&smb_svc_pex_cpu2_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e2 {
+			label = "LED_ID_DIMM_C3E2";
+			gpios = <&smb_svc_pex_cpu3_led 20 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3e1 {
+			label = "LED_ID_DIMM_C3E1";
+			gpios = <&smb_svc_pex_cpu3_led 21 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f2 {
+			label = "LED_ID_DIMM_C3F2";
+			gpios = <&smb_svc_pex_cpu3_led 22 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3f1 {
+			label = "LED_ID_DIMM_C3F1";
+			gpios = <&smb_svc_pex_cpu3_led 23 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g2 {
+			label = "LED_ID_DIMM_C3G2";
+			gpios = <&smb_svc_pex_cpu3_led 24 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3g1 {
+			label = "LED_ID_DIMM_C3G1";
+			gpios = <&smb_svc_pex_cpu3_led 25 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h2 {
+			label = "LED_ID_DIMM_C3H2";
+			gpios = <&smb_svc_pex_cpu3_led 26 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3h1 {
+			label = "LED_ID_DIMM_C3H1";
+			gpios = <&smb_svc_pex_cpu3_led 27 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a2 {
+			label = "LED_ID_DIMM_C3A2";
+			gpios = <&smb_svc_pex_cpu3_led 28 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3a1 {
+			label = "LED_ID_DIMM_C3A1";
+			gpios = <&smb_svc_pex_cpu3_led 29 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b2 {
+			label = "LED_ID_DIMM_C3B2";
+			gpios = <&smb_svc_pex_cpu3_led 30 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3b1 {
+			label = "LED_ID_DIMM_C3B1";
+			gpios = <&smb_svc_pex_cpu3_led 31 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c2 {
+			label = "LED_ID_DIMM_C3C2";
+			gpios = <&smb_svc_pex_cpu3_led 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3c1 {
+			label = "LED_ID_DIMM_C3C1";
+			gpios = <&smb_svc_pex_cpu3_led 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d2 {
+			label = "LED_ID_DIMM_C3D2";
+			gpios = <&smb_svc_pex_cpu3_led 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-c3d1 {
+			label = "LED_ID_DIMM_C3D1";
+			gpios = <&smb_svc_pex_cpu3_led 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd01 {
+			label = "LED_ID_RSSD01";
+			gpios = <&smb_svc_pex_rssd01_16 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd02 {
+			label = "LED_ID_RSSD02";
+			gpios = <&smb_svc_pex_rssd01_16 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd03 {
+			label = "LED_ID_RSSD03";
+			gpios = <&smb_svc_pex_rssd01_16 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd04 {
+			label = "LED_ID_RSSD04";
+			gpios = <&smb_svc_pex_rssd01_16 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd05 {
+			label = "LED_ID_RSSD05";
+			gpios = <&smb_svc_pex_rssd01_16 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd06 {
+			label = "LED_ID_RSSD06";
+			gpios = <&smb_svc_pex_rssd01_16 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd07 {
+			label = "LED_ID_RSSD07";
+			gpios = <&smb_svc_pex_rssd01_16 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd08 {
+			label = "LED_ID_RSSD08";
+			gpios = <&smb_svc_pex_rssd01_16 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd09 {
+			label = "LED_ID_RSSD09";
+			gpios = <&smb_svc_pex_rssd01_16 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd10 {
+			label = "LED_ID_RSSD10";
+			gpios = <&smb_svc_pex_rssd01_16 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd11 {
+			label = "LED_ID_RSSD11";
+			gpios = <&smb_svc_pex_rssd01_16 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd12 {
+			label = "LED_ID_RSSD12";
+			gpios = <&smb_svc_pex_rssd01_16 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd13 {
+			label = "LED_ID_RSSD13";
+			gpios = <&smb_svc_pex_rssd01_16 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd14 {
+			label = "LED_ID_RSSD14";
+			gpios = <&smb_svc_pex_rssd01_16 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd15 {
+			label = "LED_ID_RSSD15";
+			gpios = <&smb_svc_pex_rssd01_16 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd16 {
+			label = "LED_ID_RSSD16";
+			gpios = <&smb_svc_pex_rssd01_16 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd17 {
+			label = "LED_ID_RSSD17";
+			gpios = <&smb_svc_pex_rssd17_32 0 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd18 {
+			label = "LED_ID_RSSD18";
+			gpios = <&smb_svc_pex_rssd17_32 1 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd19 {
+			label = "LED_ID_RSSD19";
+			gpios = <&smb_svc_pex_rssd17_32 2 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd20 {
+			label = "LED_ID_RSSD20";
+			gpios = <&smb_svc_pex_rssd17_32 3 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd21 {
+			label = "LED_ID_RSSD21";
+			gpios = <&smb_svc_pex_rssd17_32 4 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd22 {
+			label = "LED_ID_RSSD22";
+			gpios = <&smb_svc_pex_rssd17_32 5 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd23 {
+			label = "LED_ID_RSSD23";
+			gpios = <&smb_svc_pex_rssd17_32 6 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd24 {
+			label = "LED_ID_RSSD24";
+			gpios = <&smb_svc_pex_rssd17_32 7 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd25 {
+			label = "LED_ID_RSSD25";
+			gpios = <&smb_svc_pex_rssd17_32 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd26 {
+			label = "LED_ID_RSSD26";
+			gpios = <&smb_svc_pex_rssd17_32 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd27 {
+			label = "LED_ID_RSSD27";
+			gpios = <&smb_svc_pex_rssd17_32 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd28 {
+			label = "LED_ID_RSSD28";
+			gpios = <&smb_svc_pex_rssd17_32 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd29 {
+			label = "LED_ID_RSSD29";
+			gpios = <&smb_svc_pex_rssd17_32 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd30 {
+			label = "LED_ID_RSSD30";
+			gpios = <&smb_svc_pex_rssd17_32 13 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd31 {
+			label = "LED_ID_RSSD31";
+			gpios = <&smb_svc_pex_rssd17_32 14 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-dimm-rssd32 {
+			label = "LED_ID_RSSD32";
+			gpios = <&smb_svc_pex_rssd17_32 15 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm01 {
+			label = "LED_ID_FAN_ASM01";
+			gpios = <&smb_svc_pex_rssd01_16 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm02 {
+			label = "LED_ID_FAN_ASM02";
+			gpios = <&smb_svc_pex_rssd01_16 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm03 {
+			label = "LED_ID_FAN_ASM03";
+			gpios = <&smb_svc_pex_rssd01_16 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm04 {
+			label = "LED_ID_FAN_ASM04";
+			gpios = <&smb_svc_pex_rssd01_16 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm05 {
+			label = "LED_ID_FAN_ASM05";
+			gpios = <&smb_svc_pex_rssd01_16 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm06 {
+			label = "LED_ID_FAN_ASM06";
+			gpios = <&smb_svc_pex_rssd01_16 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm07 {
+			label = "LED_ID_FAN_ASM07";
+			gpios = <&smb_svc_pex_rssd17_32 32 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm08 {
+			label = "LED_ID_FAN_ASM08";
+			gpios = <&smb_svc_pex_rssd17_32 33 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm09 {
+			label = "LED_ID_FAN_ASM09";
+			gpios = <&smb_svc_pex_rssd17_32 34 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm10 {
+			label = "LED_ID_FAN_ASM10";
+			gpios = <&smb_svc_pex_rssd17_32 35 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm11 {
+			label = "LED_ID_FAN_ASM11";
+			gpios = <&smb_svc_pex_rssd17_32 36 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+
+		led-id-fan-asm12 {
+			label = "LED_ID_FAN_ASM12";
+			gpios = <&smb_svc_pex_rssd17_32 37 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_YELLOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>, <&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>, <&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2V5_aux_vd 0>, <&p3v3_rtc_vd 0>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2V5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p3v3_rtc_vd: voltage-divider8 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 231000/100000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <100>;
+		full-ohms = <231>;
+	};
+
+	thermistor0: thermistor-0 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor1: thermistor-1 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 1>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor2: thermistor-2 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 4>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	thermistor3: thermistor-3 {
+		compatible = "epcos,b57891s0103";
+		pullup-uv = <3300000>;
+		pullup-ohm = <10000>;
+		pulldown-ohm = <0>;
+		io-channels = <&adc0 5>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	p12v: fixedregulator-p12v {
+		compatible = "regulator-fixed";
+		regulator-name = "p12v";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p3v3_bmc_aux: fixedregulator-p3v3-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_bmc_aux";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p1v2_bmc_aux: fixedregulator-p1v2-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v2_bmc_aux";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	p12v-a-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_a>;
+	};
+
+	p12v-b-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_b>;
+	};
+
+	p12v-c-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_c>;
+	};
+
+	p12v-d-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p12v_d>;
+	};
+
+	pvccinfaon-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu0>;
+	};
+
+	pvccfa-ehv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu0>;
+	};
+
+	pvnn-main-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu0>;
+	};
+
+	pvccin-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu0>;
+	};
+
+	pvccfa-ehv-fivra-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu0>;
+	};
+
+	pvccd-hv-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu0>;
+	};
+
+	pvpp-hbm-cpu0-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu0>;
+	};
+
+	pvccinfaon-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu1>;
+	};
+
+	pvccfa-ehv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu1>;
+	};
+
+	pvnn-main-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu1>;
+	};
+
+	pvccin-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu1>;
+	};
+
+	pvccfa-ehv-fivra-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu1>;
+	};
+
+	pvccd-hv-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu1>;
+	};
+
+	pvpp-hbm-cpu1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu1>;
+	};
+
+	pvccinfaon-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu2>;
+	};
+
+	pvccfa-ehv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu2>;
+	};
+
+	pvnn-main-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu2>;
+	};
+
+	pvccin-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu2>;
+	};
+
+	pvccfa-ehv-fivra-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu2>;
+	};
+
+	pvccd-hv-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu2>;
+	};
+
+	pvpp-hbm-cpu2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu2>;
+	};
+
+	pvccinfaon-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccinfaon_cpu3>;
+	};
+
+	pvccfa-ehv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_cpu3>;
+	};
+
+	pvnn-main-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvnn_main_cpu3>;
+	};
+
+	pvccin-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccin_cpu3>;
+	};
+
+	pvccfa-ehv-fivra-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccfa_ehv_fivra_cpu3>;
+	};
+
+	pvccd-hv-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvccd_hv_cpu3>;
+	};
+
+	pvpp-hbm-cpu3-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvpp_hbm_cpu3>;
+	};
+
+	p1v05-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v05_pch_aux>;
+	};
+
+	p1v8-pch-aux-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_pch_aux>;
+	};
+
+	p3v3-pch-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_pch>;
+	};
+
+	p5v-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p5v>;
+	};
+
+	smb-m2-ssb-ssd2 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd2>;
+	};
+
+	smb-m2-ssb-ssd1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_smb_m2_ssb_ssd1>;
+	};
+
+	ssb-rssd01-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd01>;
+	};
+
+	ssb-rssd01-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd01>;
+	};
+
+	ssb-rssd02-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd02>;
+	};
+
+	ssb-rssd02-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd02>;
+	};
+
+	ssb-rssd03-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd03>;
+	};
+
+	ssb-rssd03-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd03>;
+	};
+
+	ssb-rssd04-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd04>;
+	};
+
+	ssb-rssd04-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd04>;
+	};
+
+	ssb-rssd05-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd05>;
+	};
+
+	ssb-rssd05-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd05>;
+	};
+
+	ssb-rssd06-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd06>;
+	};
+
+	ssb-rssd06-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd06>;
+	};
+
+	ssb-rssd07-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd07>;
+	};
+
+	ssb-rssd07-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd07>;
+	};
+
+	ssb-rssd08-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd08>;
+	};
+
+	ssb-rssd08-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd08>;
+	};
+
+	ssb-rssd09-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd09>;
+	};
+
+	ssb-rssd09-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd09>;
+	};
+
+	ssb-rssd10-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd10>;
+	};
+
+	ssb-rssd10-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd10>;
+	};
+
+	ssb-rssd11-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd11>;
+	};
+
+	ssb-rssd11-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd11>;
+	};
+
+	ssb-rssd12-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd12>;
+	};
+
+	ssb-rssd12-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd12>;
+	};
+
+	ssb-rssd13-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd13>;
+	};
+
+	ssb-rssd13-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd13>;
+	};
+
+	ssb-rssd14-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd14>;
+	};
+
+	ssb-rssd14-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd14>;
+	};
+
+	ssb-rssd15-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd15>;
+	};
+
+	ssb-rssd15-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd15>;
+	};
+
+	ssb-rssd16-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd16>;
+	};
+
+	ssb-rssd16-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd16>;
+	};
+
+	ssb-rssd17-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd17>;
+	};
+
+	ssb-rssd17-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd17>;
+	};
+
+	ssb-rssd18-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd18>;
+	};
+
+	ssb-rssd18-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd18>;
+	};
+
+	ssb-rssd19-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd19>;
+	};
+
+	ssb-rssd19-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd19>;
+	};
+
+	ssb-rssd20-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd20>;
+	};
+
+	ssb-rssd20-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd20>;
+	};
+
+	ssb-rssd21-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd21>;
+	};
+
+	ssb-rssd21-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd21>;
+	};
+
+	ssb-rssd22-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd22>;
+	};
+
+	ssb-rssd22-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd22>;
+	};
+
+	ssb-rssd23-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd23>;
+	};
+
+	ssb-rssd23-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd23>;
+	};
+
+	ssb-rssd24-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd24>;
+	};
+
+	ssb-rssd24-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd24>;
+	};
+
+	ssb-rssd25-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd25>;
+	};
+
+	ssb-rssd25-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd25>;
+	};
+
+	ssb-rssd26-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd26>;
+	};
+
+	ssb-rssd26-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd26>;
+	};
+
+	ssb-rssd27-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd27>;
+	};
+
+	ssb-rssd27-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd27>;
+	};
+
+	ssb-rssd28-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd28>;
+	};
+
+	ssb-rssd28-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd28>;
+	};
+
+	ssb-rssd29-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd29>;
+	};
+
+	ssb-rssd29-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd29>;
+	};
+
+	ssb-rssd30-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd30>;
+	};
+
+	ssb-rssd30-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd30>;
+	};
+
+	ssb-rssd31-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd31>;
+	};
+
+	ssb-rssd31-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd31>;
+	};
+
+	ssb-rssd32-sw0 {
+		compatible = "regulator-output";
+		vout-supply = <&sw0_ssb_rssd32>;
+	};
+
+	ssb-rssd32-sw1 {
+		compatible = "regulator-output";
+		vout-supply = <&sw1_ssb_rssd32>;
+	};
+
+	p3v3-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p3v3_nic>;
+	};
+
+	p1v8-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v8_nic>;
+	};
+
+	p1v2-nic-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&p1v2_nic>;
+	};
+
+	pvcore-nic1-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic1>;
+	};
+
+	pvcore-nic2-consumer {
+		compatible = "regulator-output";
+		vout-supply = <&pvcore_nic2>;
+	};
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(V, 7) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <300>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default
+		     &pinctrl_adc5_default
+		     &pinctrl_adc6_default
+		     &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		     &pinctrl_adc9_default
+		     &pinctrl_adc10_default
+		     &pinctrl_adc11_default
+		     &pinctrl_adc12_default
+		     &pinctrl_adc13_default
+		     &pinctrl_adc15_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/* A0 - A7 */
+	"", "", "", "", "", "", "", "",
+	/* B0 - B7 */
+	"", "", "FM_ADR_TRIGGER_R_N", "RST_PLTRST_BUF_N", "BMC_TPM_RESET_N", "BMC_TPM_IRQ_N",
+	"PCH_TPM_RESET_N", "PCH_TPM_IRQ_N",
+	/* C0 - C7 */
+	"", "", "", "", "", "", "", "",
+	/* D0 - D7 */
+	"", "", "", "", "", "", "", "",
+	/* E0 - E7 */
+	"", "", "", "", "", "", "", "",
+	/* F0 - F7 */
+	"", "", "", "BMC_MUX_CPU1_RST_INT_N", "BMC_MUX_CPU2_RST_INT_N", "", "", "",
+	/* G0 - G7 */
+	"FM_SSD_CLK_DRVR1_EN", "FM_CK440Q_DEV_EN", "BMC_MAC1_RESET_N", "FM_DB2000_DEV_EN",
+	"FM_CPU_RMCA_LVT3_N", "FM_CPU_CATERR_LVT3_N", "FM_DBP_PRESENT_N", "",
+	/* H0 - H7 */
+	"SMB_SVC_PEX_RSSD17_32_INT", "LED_BMC_RDY", "RST_DBP_N", "", "", "", "", "",
+	/* I0 - I7 */
+	"JTAG_MUX_MODE_SEL", "JTAG_MUX_TRANS_ENBL", "JTAG_MUX_LSP_SEL5", "JTAG_MUX_MSTR_SEL",
+	"JTAG_MUX_LSP_SEL3", "", "JTAG_MUX_ENBL_N", "JTAG_MUX_RST_N",
+	/* J0 - J7 */
+	"", "", "", "", "", "", "", "",
+	/* K0 - K7 */
+	"", "", "", "", "", "", "", "",
+	/* L0 - L7 */
+	"", "", "", "", "RST_RTCRST_N", "RST_SRTCRST_N", "", "",
+	/* M0 - M7 */
+	"BMC_UART1_CTS_N", "BMC_UART1_DCD_N", "BMC_UART1_DSR_N", "BMC_UART1_RI_N",
+	"BMC_UART1_DTR_N", "BMC_UART1_RTS_N", "", "",
+	/* N0 - N7 */
+	"IRQ_BMC_PCH_NMI", "", "FM_PCH_BMC_THERMTRIP_N", "FM_BIOS_POST_CMPLT_N", "RST_PLTRST_N",
+	"FM_FLASH_SEC_OVRD", "FM_SMI_ACTIVE_N", "PWRGD_DBP",
+	/* O0 - O7 */
+	"CATERR_CPU2_EN", "H_LVT1_THERMTRIP_N", "CATERR_CPU3_EN", "SMB_SVC_PEX_CPU0_LED_INT",
+	"H_LVT1_MEMTRIP_N", "", "CATERR_CPU1_EN", "FM_PCH_ADR_COMPLETE_N",
+	/* P0 - P7 */
+	"PWRGD_SYS_PWROK", "PWRGD_PCH_PWROK", "BMC_MUX_CPU3_RST_INT_N", "BMC_MUX_SVC_RSSD_INT",
+	"FM_SLPS4_N", "IRQ_SML0_ALERT_N", "FM_SLPS3_N", "LED_BMC_HB",
+	/* Q0 - Q7 */
+	"", "PEX_BMC_RST", "PEX_VR_CTRL_RST", "PEX_NIC_RST", "PEX_CPU0_LED_RST", "PEX_CPU1_LED_RST",
+	"PEX_CPU2_LED_RST", "PEX_CPU3_LED_RST",
+	/* R0 - R7 */
+	"BMC_MUX_FANSSB_RSSD17_32_RST_INT_N", "BMC_MUX_FANPWM_RSSD01_16_RST_INT_N",
+	"BMC_MUX_SVC_VR_RST_INT_N", "BMC_MUX_NIC_RST_INT_N", "BMC_MUX_SVC_EXP_RST_INT_N",
+	"FM_CPU_ERR2_LVT3_N", "BMC_MUX_CPU0_RST_INT_N", "BMC_MUX_M2_RST_INT_N",
+	/* S0 - S7 */
+	"SMB_SVC_PEX_RSSD01_16_INT", "RST_PCH_RSMRST_R_N", "", "", "BMC_ROT_FPGA_RESET_N",
+	"FM_SSD_CLK_DRVR0_EN", "", "",
+	/* T0 - T7 */
+	"", "", "", "", "", "", "", "",
+	/* U0 - U7 */
+	"", "", "", "", "", "", "", "",
+	/* V0 - V7 */
+	"BMC_PEX_IRQ_INT", "RTC_BATT_TEST", "SMB_PEX_VR_CTRL_INT", "SMB_SVC_PEX_CPU3_LED_INT",
+	"PWRGD_CPUPWRGD", "SMB_SVC_PEX_CPU2_LED_INT", "SMB_SVC_PEX_CPU1_LED_INT",
+	"BMC_MAC0_RESET_N",
+	/* W0 - W7 */
+	"", "", "", "", "", "", "", "",
+	/* X0 - X7 */
+	"", "", "", "", "", "", "", "",
+	/* Y0 - Y7 */
+	"FM_THROTTLE_N", "FM_PASSWORD_CLEAR_N", "H_LVT3_CATERR_DLY_N", "FM_CPU_OL_INT_R_N", "", "",
+	"", "",
+	/* Z0 - Z7 */
+	"FM_CPU_ERR0_LVT3_N", "FM_CPU_ERR1_LVT3_N", "BMC_MUX_VR_PCH_CPU_RST_INT_N",
+	"JTAG_MUX_LSP_SEL1", "", "JTAG_MUX_LSP_SEL4", "JTAG_MUX_LSP_SEL2", "";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio0_unbiased_default>;
+};
+
+&pinctrl {
+	pinctrl_gpio0_unbiased_default: gpio_default {
+		pins = "AB15", "AD14", "R23", "A18", "AD24", "AD15", "AE14", "AC15", "U25", "AA24",
+		       "V24", "W26", "AA23", "V26", "U24", "V25", "AE15", "C15", "F15";
+		bias-disable;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	bmc_mux_nic: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_nic: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&gpio0 ASPEED_GPIO(Q, 3) GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <19 1>, <22 6>, <30 6>, <38 2>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"IRQ_NIC2_OVT_WRNG", "FM_NIC2_ALLSTANDBY_N", "IRQ_NIC2_OVT_SHTDN",
+				"SMB_VR_PVCORE_NIC2_ALERT_N", "FM_NIC2_PERST1_N",
+				"SMB_NIC2_ALERT_N", "FM_NIC2_PERST3_N", "FM_NIC2_PERST2_N",
+				/* GPORT1 */
+				"FM_NIC1_RST_N", "FM_NIC1_PERST0_N", "FM_NIC1_PERST2_N",
+				"FM_NIC1_PERST3_N", "SMB_NIC1_ALERT_N", "FM_NIC1_PERST1_N",
+				"SMB_VR_PVCORE_NIC1_ALERT_N", "IRQ_NIC1_OVT_SHTDN",
+				/* GPORT2 */
+				"SMB_VR_P3V3_NIC_ALERT_N", "FM_NIC2_FLASH_PRSNT",
+				"FM_NIC1_FLASH_PRSNT", "",
+				/* GPORT3 */
+				"FM_NIC2_PERST0_N", "FM_NIC2_RST_N", "", "", "", "", "", "",
+				/* GPORT4 */
+				"FM_NIC1_ALLSTANDBY_N", "IRQ_NIC1_OVT_WRNG", "", "", "", "", "", "",
+				/* GPORT5 */
+				"SMB_VR_P1V8_NIC_ALERT_N", "SMB_VR_P1V2_NIC_ALERT_N", "", "";
+
+				pinctrl-0 = <&U62160_pins>;
+				pinctrl-names = "default";
+				U62160_pins: cfg-pins {
+					pins = "gp03", "gp16", "gp20", "gp50", "gp51";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic2: ir38263-pvcore-nic2@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic2";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvcore_nic1: ir38263-pvcore-nic1@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "pvcore_nic1";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p3v3_nic: ir38263-p3v3-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p3v3_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v2_nic: ir38263-p1v2-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v2_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_nic: ir38263-p1v8-nic@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_nic";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2cmux1: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 7) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd1: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+				vss1-supply = <&p3v3_aux>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd1:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd1: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd1";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_m2_ssb_ssd2: regulator@3a {
+				compatible = "maxim,max5978";
+				reg = <0x3a>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <39 IRQ_TYPE_LEVEL_LOW>;
+				vss1-supply = <&p3v3_aux>;
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						label = "m2_ssb_ssd2:green:power";
+						default-state = "off";
+					};
+				};
+
+				regulators {
+					sw0_smb_m2_ssb_ssd2: sw0 {
+						shunt-resistor-micro-ohms = <12000>;
+						regulator-over-current-protection;
+						regulator-oc-protection-microamp = <2800000>;
+						regulator-name = "p3v3_m2_ssd2";
+						regulator-enable-ramp-delay = <10000>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	bmc-slave@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2cmux2: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(Z, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v05_pch_aux: ir38263-p1v05-pch-aux@40 {
+				compatible = "infineon,ir38263";
+				reg = <0x40>;
+
+				regulator-name = "p1v05_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			p1v8_pch_aux: ir38060-p1v8-pch-aux@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+
+				regulator-name = "p1v8_pch_aux";
+				regulator-enable-ramp-delay = <2000>;
+				vin-supply = <&p12v>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2cmux13: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 6) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu0_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu0_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU0", "PWRGD_CHC_CPU0",
+				"PWRGD_CHB_CPU0", "PWRGD_CHA_CPU0",
+				"PWRGD_CHE_CPU0", "PWRGD_CHF_CPU0",
+				"PWRGD_CHG_CPU0", "PWRGD_CHH_CPU0",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU0_ALERT_N", "SMB_VR_PVCCINFAON_CPU0_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU0_ALERT_N", "SMB_VR_PVCCD_HV_CPU0_ALERT_N",
+				"SMB_VR_PVCCIN_CPU0_ALERT_N", "SEL_SMB_DIMM_CPU0",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU0_AB_DRAM_G", "PWRGD_LVC3_CPU0_CD_DRAM_G",
+				"PWRGD_LVC3_CPU0_EF_DRAM_G", "PWRGD_LVC3_CPU0_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU0_DISABLE_COD_N", "",
+				"RST_LVC3_CPU0_RESET_N", "PWRGD_LVC3_CPU0_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU0_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU0_PROCHOT_N", "H_LVT3_CPU0_MEMHOT_IN_N",
+				"H_LVT3_CPU0_MEMHOT_OUT_N", "H_LVT3_CPU0_MEMTRIP_OUT_N",
+				"H_LVT3_CPU0_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU0_NMI", "FM_S3M_CPU0_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU0_PKG_ID0", "FM_CPU0_PKG_ID1",
+				"FM_CPU0_PROC_ID0", "FM_CPU0_PROC_ID1";
+
+				pinctrl-0 = <&U62080_pins>;
+				pinctrl-names = "default";
+				U62080_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu0@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu0: vout0 {
+						regulator-name = "pvccinfaon_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu0: vout {
+						regulator-name = "pvnn_main_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu0@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu0: vout0 {
+						regulator-name = "pvccin_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu0: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu0: vout {
+						regulator-name = "pvccd_hv_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu0@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu0_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu0: vout {
+						regulator-name = "pvpp_hbm_cpu0";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2cmux4: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(F, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu1_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu1_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU1", "PWRGD_CHC_CPU1",
+				"PWRGD_CHB_CPU1", "PWRGD_CHA_CPU1",
+				"PWRGD_CHE_CPU1", "PWRGD_CHF_CPU1",
+				"PWRGD_CHG_CPU1", "PWRGD_CHH_CPU1",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU1_ALERT_N", "SMB_VR_PVCCINFAON_CPU1_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU1_ALERT_N", "SMB_VR_PVCCD_HV_CPU1_ALERT_N",
+				"SMB_VR_PVCCIN_CPU1_ALERT_N", "SEL_SMB_DIMM_CPU1",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU1_AB_DRAM_G", "PWRGD_LVC3_CPU1_CD_DRAM_G",
+				"PWRGD_LVC3_CPU1_EF_DRAM_G", "PWRGD_LVC3_CPU1_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU1_DISABLE_COD_N", "",
+				"RST_LVC3_CPU1_RESET_N", "PWRGD_LVC3_CPU1_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU1_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU1_PROCHOT_N", "H_LVT3_CPU1_MEMHOT_IN_N",
+				"H_LVT3_CPU1_MEMHOT_OUT_N", "H_LVT3_CPU1_MEMTRIP_OUT_N",
+				"H_LVT3_CPU1_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU1_NMI", "FM_S3M_CPU1_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU1_PKG_ID0", "FM_CPU1_PKG_ID1",
+				"FM_CPU1_PROC_ID0", "FM_CPU1_PROC_ID1";
+
+				pinctrl-0 = <&U62090_pins>;
+				pinctrl-names = "default";
+				U62090_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu1@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu1: vout0 {
+						regulator-name = "pvccinfaon_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu1: vout {
+						regulator-name = "pvnn_main_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu1@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu1: vout0 {
+						regulator-name = "pvccin_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu1: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu1: vout {
+						regulator-name = "pvccd_hv_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu1@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu1_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu1: vout {
+						regulator-name = "pvpp_hbm_cpu1";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2cmux3: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu2_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu2_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU2", "PWRGD_CHC_CPU2",
+				"PWRGD_CHB_CPU2", "PWRGD_CHA_CPU2",
+				"PWRGD_CHE_CPU2", "PWRGD_CHF_CPU2",
+				"PWRGD_CHG_CPU2", "PWRGD_CHH_CPU2",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU2_ALERT_N", "SMB_VR_PVCCINFAON_CPU2_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU2_ALERT_N", "SMB_VR_PVCCD_HV_CPU2_ALERT_N",
+				"SMB_VR_PVCCIN_CPU2_ALERT_N", "SEL_SMB_DIMM_CPU2",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU2_AB_DRAM_G", "PWRGD_LVC3_CPU2_CD_DRAM_G",
+				"PWRGD_LVC3_CPU2_EF_DRAM_G", "PWRGD_LVC3_CPU2_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU2_DISABLE_COD_N", "",
+				"RST_LVC3_CPU2_RESET_N", "PWRGD_LVC3_CPU2_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU2_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU2_PROCHOT_N", "H_LVT3_CPU2_MEMHOT_IN_N",
+				"H_LVT3_CPU2_MEMHOT_OUT_N", "H_LVT3_CPU2_MEMTRIP_OUT_N",
+				"H_LVT3_CPU2_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU2_NMI", "FM_S3M_CPU2_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU2_PKG_ID0", "FM_CPU2_PKG_ID1",
+				"FM_CPU2_PROC_ID0", "FM_CPU2_PROC_ID1";
+
+				pinctrl-0 = <&U62100_pins>;
+				pinctrl-names = "default";
+				U62100_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu2@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu2: vout0 {
+						regulator-name = "pvccinfaon_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu2: vout {
+						regulator-name = "pvnn_main_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu2@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu2: vout0 {
+						regulator-name = "pvccin_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu2: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu2: vout {
+						regulator-name = "pvccd_hv_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu2@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu2_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu2: vout {
+						regulator-name = "pvpp_hbm_cpu2";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	i2cmux22: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(P, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_cpu3_event: pinctrl@20 {
+				compatible = "cypress,cy8c9540";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&smb_pex_vr_ctrl>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&smb_svc_pex_cpu3_led 16 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <14 2>, <21 1>, <25 3>, <33 1>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"PWRGD_CHD_CPU3", "PWRGD_CHC_CPU3",
+				"PWRGD_CHB_CPU3", "PWRGD_CHA_CPU3",
+				"PWRGD_CHE_CPU3", "PWRGD_CHF_CPU3",
+				"PWRGD_CHG_CPU3", "PWRGD_CHH_CPU3",
+				/* GPORT1 */
+				"SMB_VR_PVPP_HBM_CPU3_ALERT_N", "SMB_VR_PVCCINFAON_CPU3_ALERT_N",
+				"SMB_VR_PVNN_MAIN_CPU3_ALERT_N", "SMB_VR_PVCCD_HV_CPU3_ALERT_N",
+				"SMB_VR_PVCCIN_CPU3_ALERT_N", "SEL_SMB_DIMM_CPU3",
+				"", "",
+				/* GPORT2 */
+				"PWRGD_LVC3_CPU3_AB_DRAM_G", "PWRGD_LVC3_CPU3_CD_DRAM_G",
+				"PWRGD_LVC3_CPU3_EF_DRAM_G", "PWRGD_LVC3_CPU3_GH_DRAM_G",
+				/* GPORT3 */
+				"FM_CPU3_DISABLE_COD_N", "",
+				"RST_LVC3_CPU3_RESET_N", "PWRGD_LVC3_CPU3_PWRGOOD",
+				"PWRGD_PLT_AUX_CPU3_LVT3", "",
+				"", "",
+				/* GPORT4 */
+				"H_LVT3_CPU3_PROCHOT_N", "H_LVT3_CPU3_MEMHOT_IN_N",
+				"H_LVT3_CPU3_MEMHOT_OUT_N", "H_LVT3_CPU3_MEMTRIP_OUT_N",
+				"H_LVT3_CPU3_THERMTRIP_OUT_N", "",
+				"H_LVT3_CPU3_NMI", "FM_S3M_CPU3_CD_INIT_ERROR",
+				/* GPORT5 */
+				"FM_CPU3_PKG_ID0", "FM_CPU3_PKG_ID1",
+				"FM_CPU3_PROC_ID0", "FM_CPU3_PROC_ID1";
+
+				pinctrl-0 = <&U62110_pins>;
+				pinctrl-names = "default";
+				U62110_pins: cfg-pins {
+					pins = "gp10", "gp11", "gp12", "gp13", "gp14";
+					function = "gpio";
+					input-enable;
+					bias-pull-up;
+				};
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pvccinfaon-pvccfa-cpu3@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccinfaon_cpu3: vout0 {
+						regulator-name = "pvccinfaon_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+			tda38640-pvnn-main-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvnn_main_cpu3: vout {
+						regulator-name = "pvnn_main_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			mp2973-pvccin-pvccfa-cpu3@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvccin_cpu3: vout0 {
+						regulator-name = "pvccin_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+					pvccfa_ehv_fivra_cpu3: vout1 {
+						regulator-name = "pvccfa_ehv_fivra_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvccd-hv-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+				infineon,en-pin-fixed-level;
+
+				regulators {
+					pvccd_hv_cpu3: vout {
+						regulator-name = "pvccd_hv_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			tda38640-pvpp-hbm-cpu3@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+				interrupt-parent = <&smb_pex_cpu3_event>;
+				interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+				regulators {
+					pvpp_hbm_cpu3: vout {
+						regulator-name = "pvpp_hbm_cpu3";
+						regulator-enable-ramp-delay = <200>;
+					};
+				};
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2cmux14: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux15: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 11 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux16: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux17: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 0 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux18: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 3 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux19: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 9 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd17_32: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 19 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD17_SMBRST_N", "RSSD18_SMBRST_N",
+				"RSSD19_SMBRST_N", "RSSD20_SMBRST_N",
+				"RSSD21_SMBRST_N", "RSSD22_SMBRST_N",
+				"RSSD23_SMBRST_N", "RSSD24_SMBRST_N",
+				/* GPORT1 */
+				"RSSD25_SMBRST_N", "RSSD26_SMBRST_N",
+				"RSSD27_SMBRST_N", "RSSD28_SMBRST_N",
+				"RSSD29_SMBRST_N", "RSSD30_SMBRST_N",
+				"RSSD31_SMBRST_N", "RSSD32_SMBRST_N",
+				/* GPORT2 */
+				"RSSD17_PWRDIS", "RSSD18_PWRDIS",
+				"RSSD19_PWRDIS", "RSSD20_PWRDIS",
+				/* GPORT3 */
+				"RSSD21_PWRDIS", "RSSD22_PWRDIS",
+				"RSSD23_PWRDIS", "RSSD24_PWRDIS",
+				"RSSD25_PWRDIS", "RSSD26_PWRDIS",
+				"RSSD27_PWRDIS", "RSSD28_PWRDIS",
+				/* GPORT4 */
+				"RSSD29_PWRDIS", "RSSD30_PWRDIS",
+				"RSSD31_PWRDIS", "RSSD32_PWRDIS",
+				"RSSD17_RESET_N", "RSSD18_RESET_N",
+				"RSSD19_RESET_N", "RSSD20_RESET_N",
+				/* GPORT5 */
+				"RSSD21_RESET_N", "RSSD22_RESET_N",
+				"RSSD23_RESET_N", "RSSD24_RESET_N",
+				"RSSD25_RESET_N", "RSSD26_RESET_N",
+				"RSSD27_RESET_N", "RSSD28_RESET_N",
+				/* GPORT6 */
+				"RSSD29_RESET_N", "RSSD30_RESET_N",
+				"RSSD31_RESET_N", "RSSD32_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux20: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 4 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux21: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 5 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2cmux5: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 0) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_aux>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux6: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux7: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux8: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux9: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux10: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smb_pex_rssd_01_16: pinctrl@20 {
+				compatible = "cypress,cy8c9560";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-parent = <&bmc_pex_irq>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				vdd-supply = <&p3v3_aux>;
+				reset-gpios = <&bmc_pex_irq 18 GPIO_ACTIVE_HIGH>;
+
+				gpio-reserved-ranges = <48 12>;
+
+				gpio-line-names =
+				/* GPORT0 */
+				"RSSD01_SMBRST_N", "RSSD02_SMBRST_N",
+				"RSSD03_SMBRST_N", "RSSD04_SMBRST_N",
+				"RSSD05_SMBRST_N", "RSSD06_SMBRST_N",
+				"RSSD07_SMBRST_N", "RSSD08_SMBRST_N",
+				/* GPORT1 */
+				"RSSD09_SMBRST_N", "RSSD10_SMBRST_N",
+				"RSSD11_SMBRST_N", "RSSD12_SMBRST_N",
+				"RSSD13_SMBRST_N", "RSSD14_SMBRST_N",
+				"RSSD15_SMBRST_N", "RSSD16_SMBRST_N",
+				/* GPORT2 */
+				"RSSD01_PWRDIS", "RSSD02_PWRDIS",
+				"RSSD03_PWRDIS", "RSSD04_PWRDIS",
+				/* GPORT3 */
+				"RSSD05_PWRDIS", "RSSD06_PWRDIS",
+				"RSSD07_PWRDIS", "RSSD08_PWRDIS",
+				"RSSD09_PWRDIS", "RSSD10_PWRDIS",
+				"RSSD11_PWRDIS", "RSSD12_PWRDIS",
+				/* GPORT4 */
+				"RSSD13_PWRDIS", "RSSD14_PWRDIS",
+				"RSSD15_PWRDIS", "RSSD16_PWRDIS",
+				"RSSD01_RESET_N", "RSSD02_RESET_N",
+				"RSSD03_RESET_N", "RSSD04_RESET_N",
+				/* GPORT5 */
+				"RSSD05_RESET_N", "RSSD06_RESET_N",
+				"RSSD07_RESET_N", "RSSD08_RESET_N",
+				"RSSD09_RESET_N", "RSSD10_RESET_N",
+				"RSSD11_RESET_N", "RSSD12_RESET_N",
+				/* GPORT6 */
+				"RSSD13_RESET_N", "RSSD14_RESET_N",
+				"RSSD15_RESET_N", "RSSD16_RESET_N",
+				"", "",
+				"", "",
+				/* GPORT7 */
+				"", "",
+				"", "",
+				"", "",
+				"", "";
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux11: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 12 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2cmux12: mux@70 {
+				compatible = "maxim,max7357";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				reset-gpios = <&bmc_pex_irq 14 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+				vdd-supply = <&p3v3_aux>;
+
+				i2c@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@2 {
+					reg = <2>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@3 {
+					reg = <3>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@4 {
+					reg = <4>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@5 {
+					reg = <5>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@6 {
+					reg = <6>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+				i2c@7 {
+					reg = <7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
+		};
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	i2cmux23: mux@77 {
+		compatible = "maxim,max7357";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&gpio0 ASPEED_GPIO(R, 4) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+		vdd-supply = <&p3v3_bmc_aux>;
+	};
+};
+
+&i2cmux23 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_pex_vr_ctrl: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 2) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"BCM0_INPUT_DISABLE_N", "SMB_VR_P3V3_AUX_ALERT_N",
+			"SMB_PEX_CPU1_EVENT_INT", "SMB_PEX_CPU2_EVENT_INT",
+			"DPIC0_VOLTAGE_DETECTB_N", "DPIC0_VOLTAGE_DETECTA_N",
+			"DPIC1_VOLTAGE_DETECTA_N", "DPIC1_VOLTAGE_DETECTB_N",
+			/* GPORT1 */
+			"SMB_PEX_NIC_INT", "SMB_VR_P1V05_PCH_AUX_ALERT_N",
+			"SMB_PEX_CPU0_EVENT_INT", "SMB_PEX_CPU3_EVENT_INT",
+			"LED_ID_TPM", "PLUG_DETECT_TPM",
+			"PLUG_DETECT_M2_SSD_CARRIER1", "RST_M2_SSD1_PERST_N",
+			/* GPORT2 */
+			"LED_ID_BAT", "LED_ID_MGMT_PORT2",
+			"LED_ID_MGMT_PORT1", "SMB_VR_P5V_AUX_ALERT_N",
+			/* GPORT3 */
+			"SMB_VR_AUX_SSB_ALERT_N", "BCM1_INPUT_DISABLE_N",
+			"LED_ID_NIC1_PORT1", "LED_ID_NIC1_PORT2",
+			"LED_ID_NIC2_PORT1", "LED_ID_NIC2_PORT2",
+			"RST_M2_SSD2_PERST_N", "PLUG_DETECT_M2_SSD2",
+			/* GPORT4 */
+			"PLUG_DETECT_BAT", "PLUG_DETECT_M2_SSD1",
+			"M2_SSD1_SSB_ALERT_N", "BCM2_INPUT_DISABLE_N",
+			"SMB_VR_P1V8_PCH_AUX_ALERT_N", "BCM3_INPUT_DISABLE_N",
+			"LED_PWR_DWR_BACK", "LED_ID_DWR_BACK_P",
+			/* GPORT5 */
+			"LED_ID_M2_SSD2", "LED_ID_M2_SSD1",
+			"PLUG_DETECT_M2_SSD_CARRIER2", "M2_SSD2_SSB_ALERT_N";
+
+			pinctrl-0 = <&U62120_input &U62120_input_pullup>;
+			pinctrl-names = "default";
+			U62120_input: input-pins {
+				pins = "gp10";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+			U62120_input_pullup: input-pullup-pins {
+				pins = "gp01", "gp02", "gp03", "gp11", "gp12", "gp13",
+				"gp23", "gp30", "gp40", "gp42", "gp44", "gp53";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		bmc_pex_irq: pinctrl@20 {
+			compatible = "cypress,cy8c9520";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 1) GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"SMB_MUX_PWM_FANGRP2_RST_INT_N", "SMB_MUX_SSB_FANGRP2_RST_INT_N",
+			"SMB_MUX_PWM_FANGRP1_RST_INT_N", "SMB_MUX_SSB_RSSD01_08_RST_INT_N",
+			"SMB_MUX_RSSD01_08_RST_INT_N", "SMB_MUX_RSSD09_16_RST_INT_N",
+			"SMB_PEX_RSSD01_16_INT", "SMB_MUX_SSB_FANGRP1_RST_INT_N",
+			/* GPORT1 */
+			"SMB_SVC_PEX_FAN_ALERT_INT", "SMB_MUX_SSB_RSSD09_16_RST_INT_N",
+			"SMB_MUX_SSB_RSSD17_24_RST_INT_N", "SMB_MUX_PWM_FANGRP0_RST_INT_N",
+			"SMB_MUX_RSSD17_24_RST_INT_N", "SMB_PEX_RSSD17_32_INT",
+			"SMB_MUX_RSSD25_32_RST_INT_N", "SMB_MUX_SSB_RSSD25_32_RST_INT_N",
+			/* GPORT2 */
+			"SMB_MUX_SSB_FANGRP0_RST_INT_N", "PEX_FAN_ALERT_RST",
+			"PEX_RSSD01_16_RST", "PEX_RSSD17_32_RST";
+			pinctrl-0 = <&U60000_pins>;
+			pinctrl-names = "default";
+			U60000_pins: cfg-pins {
+				pins = "gp06", "gp10", "gp15";
+				function = "gpio";
+				input-enable;
+				bias-disable;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux24: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			vdd-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		eeprom@51 {
+			compatible = "atmel,24c32";
+			reg = <0x51>;
+			pagesize = <32>;
+			vcc-supply = <&p3v3_bmc_aux>;
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2cmux25: mux@70 {
+			compatible = "maxim,max7357";
+			reg = <0x70>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2cmux25 {
+	reset-gpios = <&gpio0 ASPEED_GPIO(R, 2) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+	vdd-supply = <&p3v3_bmc_aux>;
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p5v_aux: ir38263-p5v-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			regulator-name = "p5v_aux";
+			regulator-enable-ramp-delay = <2000>;
+			vin-supply = <&p12v>;
+			vbus-supply = <&p3v3_bmc_aux>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		p3v3_aux: ir38263-p3v3-aux@40 {
+			compatible = "infineon,ir38263";
+			reg = <0x40>;
+
+			vin-supply = <&p12v>;
+			regulator-name = "p3v3_aux";
+			/*
+			 * 2msec for regulator + 18msec for board capacitance
+			 * Note: Every IC has a PTC which slowly charges the bypass
+			 * cap.
+			 */
+			regulator-enable-ramp-delay = <200000>;
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		aux_ssb: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_pex_vr_ctrl>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+			vss1-supply = <&p5v_aux>;
+			vss2-supply = <&p3v3_aux>;
+			regulators {
+				p5v: sw0 {
+					regulator-name = "p5v";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+				p3v3_pch: sw1 {
+					regulator-name = "p3v3_pch";
+					shunt-resistor-micro-ohms = <12000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <100000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_a: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_a: vout2 {
+					regulator-name = "bcm0";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_b: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_b: vout2 {
+					regulator-name = "bcm1";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_c: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_c: vout2 {
+					regulator-name = "bcm2";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pli1209bc_p12v_d: regulator@5f {
+			compatible = "vicor,pli1209bc";
+			reg = <0x5f>;
+			regulators {
+				p12v_d: vout2 {
+					regulator-name = "bcm3";
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux24 {
+
+	reset-gpios = <&gpio0 ASPEED_GPIO(P, 3) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+	i2c@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+		smb_svc_pex_rssd01_16: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu0_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD01", "LED_ID_RSSD02",
+			"LED_ID_RSSD03", "LED_ID_RSSD04",
+			"LED_ID_RSSD05", "LED_ID_RSSD06",
+			"LED_ID_RSSD07", "LED_ID_RSSD08",
+			/* GPORT1 */
+			"LED_ID_RSSD09", "LED_ID_RSSD10",
+			"LED_ID_RSSD11", "LED_ID_RSSD12",
+			"LED_ID_RSSD13", "LED_ID_RSSD14",
+			"LED_ID_RSSD15", "LED_ID_RSSD16",
+			/* GPORT2 */
+			"RSSD01_PRESENT_N", "RSSD02_PRESENT_N",
+			"RSSD03_PRESENT_N", "RSSD04_PRESENT_N",
+			/* GPORT3 */
+			"RSSD05_PRESENT_N", "RSSD06_PRESENT_N",
+			"RSSD07_PRESENT_N", "RSSD08_PRESENT_N",
+			"RSSD09_PRESENT_N", "RSSD10_PRESENT_N",
+			"RSSD11_PRESENT_N", "RSSD12_PRESENT_N",
+			/* GPORT4 */
+			"RSSD13_PRESENT_N", "RSSD14_PRESENT_N",
+			"RSSD15_PRESENT_N", "RSSD16_PRESENT_N",
+			"LED_ID_FAN_ASM01", "LED_ID_FAN_ASM02",
+			"LED_ID_FAN_ASM03", "LED_ID_FAN_ASM04",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM05", "LED_ID_FAN_ASM06",
+			"PLUG_DETECT_FAN_ASM01", "PLUG_DETECT_FAN_ASM02",
+			"PLUG_DETECT_FAN_ASM03", "PLUG_DETECT_FAN_ASM04",
+			"PLUG_DETECT_FAN_ASM05", "PLUG_DETECT_FAN_ASM06",
+			/* GPORT6 */
+			"SSB_RSSD01_ALERT_N", "SSB_RSSD02_ALERT_N",
+			"SSB_RSSD03_ALERT_N", "SSB_RSSD04_ALERT_N",
+			"SSB_RSSD05_ALERT_N", "SSB_RSSD06_ALERT_N",
+			"SSB_RSSD07_ALERT_N", "SSB_RSSD08_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD09_ALERT_N", "SSB_RSSD10_ALERT_N",
+			"SSB_RSSD11_ALERT_N", "SSB_RSSD12_ALERT_N",
+			"SSB_RSSD13_ALERT_N", "SSB_RSSD14_ALERT_N",
+			"SSB_RSSD15_ALERT_N", "SSB_RSSD16_ALERT_N";
+			pinctrl-0 = <&U65200_pins>;
+			pinctrl-names = "default";
+			U65200_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62", "gp63", "gp64",
+				       "gp65", "gp66", "gp67", "gp70", "gp71",
+				       "gp72", "gp73", "gp74", "gp75", "gp76",
+				       "gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_rssd17_32: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(H, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&smb_svc_pex_cpu1_led 17 GPIO_ACTIVE_HIGH>;
+			gpio-line-names =
+			/* GPORT0 */
+			"LED_ID_RSSD17", "LED_ID_RSSD18",
+			"LED_ID_RSSD19", "LED_ID_RSSD20",
+			"LED_ID_RSSD21", "LED_ID_RSSD22",
+			"LED_ID_RSSD23", "LED_ID_RSSD24",
+			/* GPORT1 */
+			"LED_ID_RSSD25", "LED_ID_RSSD26",
+			"LED_ID_RSSD27", "LED_ID_RSSD28",
+			"LED_ID_RSSD29", "LED_ID_RSSD30",
+			"LED_ID_RSSD31", "LED_ID_RSSD32",
+			/* GPORT2 */
+			"RSSD17_PRESENT_N", "RSSD18_PRESENT_N",
+			"RSSD19_PRESENT_N", "RSSD20_PRESENT_N",
+			/* GPORT3 */
+			"RSSD21_PRESENT_N", "RSSD22_PRESENT_N",
+			"RSSD23_PRESENT_N", "RSSD24_PRESENT_N",
+			"RSSD25_PRESENT_N", "RSSD26_PRESENT_N",
+			"RSSD27_PRESENT_N", "RSSD28_PRESENT_N",
+			/* GPORT4 */
+			"RSSD29_PRESENT_N", "RSSD30_PRESENT_N",
+			"RSSD31_PRESENT_N", "RSSD32_PRESENT_N",
+			"LED_ID_FAN_ASM07", "LED_ID_FAN_ASM08",
+			"LED_ID_FAN_ASM09", "LED_ID_FAN_ASM10",
+			/* GPORT5 */
+			"LED_ID_FAN_ASM11", "LED_ID_FAN_ASM12",
+			"PLUG_DETECT_FAN_ASM07", "PLUG_DETECT_FAN_ASM08",
+			"PLUG_DETECT_FAN_ASM09", "PLUG_DETECT_FAN_ASM10",
+			"PLUG_DETECT_FAN_ASM11", "PLUG_DETECT_FAN_ASM12",
+			/* GPORT6 */
+			"SSB_RSSD17_ALERT_N", "SSB_RSSD18_ALERT_N",
+			"SSB_RSSD19_ALERT_N", "SSB_RSSD20_ALERT_N",
+			"SSB_RSSD21_ALERT_N", "SSB_RSSD22_ALERT_N",
+			"SSB_RSSD23_ALERT_N", "SSB_RSSD24_ALERT_N",
+			/* GPORT7 */
+			"SSB_RSSD25_ALERT_N", "SSB_RSSD26_ALERT_N",
+			"SSB_RSSD27_ALERT_N", "SSB_RSSD28_ALERT_N",
+			"SSB_RSSD29_ALERT_N", "SSB_RSSD30_ALERT_N",
+			"SSB_RSSD31_ALERT_N", "SSB_RSSD32_ALERT_N";
+			pinctrl-0 = <&U65300_pins>;
+			pinctrl-names = "default";
+			U65300_pins: cfg-pins {
+				pins = "gp60", "gp61", "gp62",
+				"gp63", "gp64", "gp65", "gp66",
+				"gp67", "gp70", "gp71", "gp72",
+				"gp73", "gp74", "gp75", "gp76",
+				"gp77";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu1_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 6) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 5) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C1E2", "PLUG_DETECT_DIMM_C1E1",
+			"PLUG_DETECT_DIMM_C1F2", "PLUG_DETECT_DIMM_C1F1",
+			"PLUG_DETECT_DIMM_C1G2", "PLUG_DETECT_DIMM_C1G1",
+			"PLUG_DETECT_DIMM_C1H2", "PLUG_DETECT_DIMM_C1H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C1D1", "PLUG_DETECT_DIMM_C1D2",
+			"PLUG_DETECT_DIMM_C1C1", "PLUG_DETECT_DIMM_C1C2",
+			"PLUG_DETECT_DIMM_C1B1", "PLUG_DETECT_DIMM_C1B2",
+			"PLUG_DETECT_DIMM_C1A1", "PLUG_DETECT_DIMM_C1A2",
+			/* GPORT2 */
+			"PEX_CPU1_EVENT_RST", "SVC_PEX_RSSD17_32_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C1E2", "LED_ID_DIMM_C1E1",
+			"LED_ID_DIMM_C1F2", "LED_ID_DIMM_C1F1",
+			"LED_ID_DIMM_C1G2", "LED_ID_DIMM_C1G1",
+			"LED_ID_DIMM_C1H2", "LED_ID_DIMM_C1H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C1A2", "LED_ID_DIMM_C1A1",
+			"LED_ID_DIMM_C1B2", "LED_ID_DIMM_C1B1",
+			"LED_ID_DIMM_C1C2", "LED_ID_DIMM_C1C1",
+			"LED_ID_DIMM_C1D2", "LED_ID_DIMM_C1D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU1_SKTOCC_N", "LED_ID_CPU1";
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_fan_alert: pinctrl@20 {
+			compatible = "cypress,cy8c9560";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&bmc_pex_irq>;
+			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_aux>;
+			reset-gpios = <&bmc_pex_irq 17 GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <24 3>, <51 9>;
+			gpio-line-names =
+			/* GPORT0 */
+			"FAN01_SSB_ALERT_N", "FAN02_SSB_ALERT_N",
+			"FAN03_SSB_ALERT_N", "FAN04_SSB_ALERT_N",
+			"FAN05_SSB_ALERT_N", "FAN06_SSB_ALERT_N",
+			"FAN07_SSB_ALERT_N", "FAN08_SSB_ALERT_N",
+			/* GPORT1 */
+			"FAN09_SSB_ALERT_N", "FAN10_SSB_ALERT_N",
+			"FAN11_SSB_ALERT_N", "FAN12_SSB_ALERT_N",
+			"FAN13_SSB_ALERT_N", "FAN14_SSB_ALERT_N",
+			"FAN15_SSB_ALERT_N", "FAN16_SSB_ALERT_N",
+			/* GPORT2 */
+			"FAN17_SSB_ALERT_N", "FAN18_SSB_ALERT_N",
+			"FAN19_SSB_ALERT_N", "FAN20_SSB_ALERT_N",
+			/* GPORT3 */
+			"FAN21_SSB_ALERT_N", "FAN22_SSB_ALERT_N",
+			"FAN23_SSB_ALERT_N", "FAN24_SSB_ALERT_N",
+			"", "",
+			"", "FAN01_PWM_ALERT_N",
+			/* GPORT4 */
+			"FAN02_PWM_ALERT_N", "FAN03_PWM_ALERT_N",
+			"FAN04_PWM_ALERT_N", "FAN05_PWM_ALERT_N",
+			"FAN06_PWM_ALERT_N", "FAN07_PWM_ALERT_N",
+			"FAN08_PWM_ALERT_N", "FAN09_PWM_ALERT_N",
+			/* GPORT5 */
+			"FAN10_PWM_ALERT_N", "FAN11_PWM_ALERT_N",
+			"FAN12_PWM_ALERT_N", "FAN13_PWM_ALERT_N",
+			"FAN14_PWM_ALERT_N", "FAN15_PWM_ALERT_N",
+			"FAN16_PWM_ALERT_N", "FAN17_PWM_ALERT_N",
+			/* GPORT6 */
+			"FAN18_PWM_ALERT_N", "FAN19_PWM_ALERT_N",
+			"FAN20_PWM_ALERT_N", "FAN21_PWM_ALERT_N",
+			"FAN22_PWM_ALERT_N", "FAN23_PWM_ALERT_N",
+			"FAN24_PWM_ALERT_N", "",
+			/* GPORT7 */
+			"", "",
+			"", "",
+			"", "",
+			"", "";
+			pinctrl-0 = <&U65600_pins>;
+			pinctrl-names = "default";
+			U65600_pins: cfg-pins {
+				pins = "gp00", "gp01", "gp02",
+				"gp03", "gp04", "gp05", "gp06",
+				"gp07", "gp10", "gp11", "gp12",
+				"gp13", "gp14", "gp15", "gp16",
+				"gp17", "gp20", "gp21", "gp22",
+				"gp23", "gp30", "gp31", "gp32",
+				"gp33", "gp37", "gp40", "gp41",
+				"gp42", "gp43", "gp44", "gp45",
+				"gp46", "gp47", "gp50", "gp51",
+				"gp52", "gp53", "gp54", "gp55",
+				"gp56", "gp57", "gp60", "gp61",
+				"gp62", "gp63", "gp64", "gp65",
+				"gp66";
+				function = "gpio";
+				input-enable;
+				bias-pull-up;
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu2_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 5) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C2E2", "PLUG_DETECT_DIMM_C2E1",
+			"PLUG_DETECT_DIMM_C2F2", "PLUG_DETECT_DIMM_C2F1",
+			"PLUG_DETECT_DIMM_C2G2", "PLUG_DETECT_DIMM_C2G1",
+			"PLUG_DETECT_DIMM_C2H2", "PLUG_DETECT_DIMM_C2H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C2D1", "PLUG_DETECT_DIMM_C2D2",
+			"PLUG_DETECT_DIMM_C2C1", "PLUG_DETECT_DIMM_C2C2",
+			"PLUG_DETECT_DIMM_C2B1", "PLUG_DETECT_DIMM_C2B2",
+			"PLUG_DETECT_DIMM_C2A1", "PLUG_DETECT_DIMM_C2A2",
+			/* GPORT2 */
+			"PEX_CPU2_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C2E2", "LED_ID_DIMM_C2E1",
+			"LED_ID_DIMM_C2F2", "LED_ID_DIMM_C2F1",
+			"LED_ID_DIMM_C2G2", "LED_ID_DIMM_C2G1",
+			"LED_ID_DIMM_C2H2", "LED_ID_DIMM_C2H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C2A2", "LED_ID_DIMM_C2A1",
+			"LED_ID_DIMM_C2B2", "LED_ID_DIMM_C2B1",
+			"LED_ID_DIMM_C2C2", "LED_ID_DIMM_C2C1",
+			"LED_ID_DIMM_C2D2", "LED_ID_DIMM_C2D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU2_SKTOCC_N", "LED_ID_CPU2";
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		smb_svc_pex_cpu3_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(V, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <17 3>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C3E2", "PLUG_DETECT_DIMM_C3E1",
+			"PLUG_DETECT_DIMM_C3F2", "PLUG_DETECT_DIMM_C3F1",
+			"PLUG_DETECT_DIMM_C3G2", "PLUG_DETECT_DIMM_C3G1",
+			"PLUG_DETECT_DIMM_C3H2", "PLUG_DETECT_DIMM_C3H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C3D1", "PLUG_DETECT_DIMM_C3D2",
+			"PLUG_DETECT_DIMM_C3C1", "PLUG_DETECT_DIMM_C3C2",
+			"PLUG_DETECT_DIMM_C3B1", "PLUG_DETECT_DIMM_C3B2",
+			"PLUG_DETECT_DIMM_C3A1", "PLUG_DETECT_DIMM_C3A2",
+			/* GPORT2 */
+			"PEX_CPU3_EVENT_RST", "",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C3E2", "LED_ID_DIMM_C3E1",
+			"LED_ID_DIMM_C3F2", "LED_ID_DIMM_C3F1",
+			"LED_ID_DIMM_C3G2", "LED_ID_DIMM_C3G1",
+			"LED_ID_DIMM_C3H2", "LED_ID_DIMM_C3H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C3A2", "LED_ID_DIMM_C3A1",
+			"LED_ID_DIMM_C3B2", "LED_ID_DIMM_C3B1",
+			"LED_ID_DIMM_C3C2", "LED_ID_DIMM_C3C1",
+			"LED_ID_DIMM_C3D2", "LED_ID_DIMM_C3D1",
+			/* GPORT5 */
+			"LED_PWR_DWR_FRNT", "LED_ID_DWR_FRNT_P",
+			"FM_CPU3_SKTOCC_N", "LED_ID_CPU3";
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		smb_svc_pex_cpu0_led: pinctrl@20 {
+			compatible = "cypress,cy8c9540";
+			reg = <0x20>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <ASPEED_GPIO(O, 3) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			vdd-supply = <&p3v3_bmc_aux>;
+			reset-gpios = <&gpio0 ASPEED_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
+			gpio-reserved-ranges = <18 2>, <36 2>;
+			gpio-line-names =
+			/* GPORT0 */
+			"PLUG_DETECT_DIMM_C0E2", "PLUG_DETECT_DIMM_C0E1",
+			"PLUG_DETECT_DIMM_C0F2", "PLUG_DETECT_DIMM_C0F1",
+			"PLUG_DETECT_DIMM_C0G2", "PLUG_DETECT_DIMM_C0G1",
+			"PLUG_DETECT_DIMM_C0H2", "PLUG_DETECT_DIMM_C0H1",
+			/* GPORT1 */
+			"PLUG_DETECT_DIMM_C0D1", "PLUG_DETECT_DIMM_C0D2",
+			"PLUG_DETECT_DIMM_C0C1", "PLUG_DETECT_DIMM_C0C2",
+			"PLUG_DETECT_DIMM_C0B1", "PLUG_DETECT_DIMM_C0B2",
+			"PLUG_DETECT_DIMM_C0A1", "PLUG_DETECT_DIMM_C0A2",
+			/* GPORT2 */
+			"PEX_CPU0_EVENT_RST", "SVC_PEX_RSSD01_16_RST",
+			"", "",
+			/* GPORT3 */
+			"LED_ID_DIMM_C0E2", "LED_ID_DIMM_C0E1",
+			"LED_ID_DIMM_C0F2", "LED_ID_DIMM_C0F1",
+			"LED_ID_DIMM_C0G2", "LED_ID_DIMM_C0G1",
+			"LED_ID_DIMM_C0H2", "LED_ID_DIMM_C0H1",
+			/* GPORT4 */
+			"LED_ID_DIMM_C0A2", "LED_ID_DIMM_C0A1",
+			"LED_ID_DIMM_C0B2", "LED_ID_DIMM_C0B1",
+			"LED_ID_DIMM_C0C2", "LED_ID_DIMM_C0C1",
+			"LED_ID_DIMM_C0D2", "LED_ID_DIMM_C0D1",
+			/* GPORT5 */
+			"", "",
+			"FM_CPU0_SKTOCC_N", "LED_ID_CPU0";
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	p1v2_bmc_aux_mon: pmic@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+		max8952,default-mode = <3>;
+		max8952,dvs-mode-microvolt = <1100000>, <1100000>,
+					     <1100000>, <1100000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2cmux8 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan10_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan10_ssb: sw0 {
+					regulator-name = "fan10_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan12_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan12_ssb: sw0 {
+					regulator-name = "fan12_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan14_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan14_ssb: sw0 {
+					regulator-name = "fan14_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan16_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan16_ssb: sw0 {
+					regulator-name = "fan16_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan18_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan18_ssb: sw0 {
+					regulator-name = "fan18_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan20_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan20_ssb: sw0 {
+					regulator-name = "fan20_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan22_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan22_ssb: sw0 {
+					regulator-name = "fan22_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan24_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan24_ssb: sw0 {
+					regulator-name = "fan24_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux7 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan17_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan17_ssb: sw0 {
+					regulator-name = "fan17_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan19_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan19_ssb: sw0 {
+					regulator-name = "fan19_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan21_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan21_ssb: sw0 {
+					regulator-name = "fan21_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan23_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan23_ssb: sw0 {
+					regulator-name = "fan23_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan02_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan02_ssb: sw0 {
+					regulator-name = "fan02_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan04_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan04_ssb: sw0 {
+					regulator-name = "fan04_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan06_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan06_ssb: sw0 {
+					regulator-name = "fan06_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan08_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan08_ssb: sw0 {
+					regulator-name = "fan08_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux6 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan01_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan01_ssb: sw0 {
+					regulator-name = "fan01_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan03_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan03_ssb: sw0 {
+					regulator-name = "fan03_supply";
+
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan05_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan05_ssb: sw0 {
+					regulator-name = "fan05_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan07_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan07_ssb: sw0 {
+					regulator-name = "fan07_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan09_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan09_ssb: sw0 {
+					regulator-name = "fan09_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan11_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan11_ssb: sw0 {
+					regulator-name = "fan11_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan13_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan13_ssb: sw0 {
+					regulator-name = "fan13_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan15_ssb: regulator@3a {
+			compatible = "maxim,max5978";
+			reg = <0x3a>;
+			vss1-supply = <&p12v>;
+			interrupt-parent = <&smb_svc_pex_fan_alert>;
+			interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+			regulators {
+				sw0_fan15_ssb: sw0 {
+					regulator-name = "fan15_supply";
+					shunt-resistor-micro-ohms = <10000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <3400000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+
+	};
+};
+
+&i2cmux9 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd19: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd19:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd19: sw0 {
+					regulator-name = "rssd19_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd19: sw1 {
+					regulator-name = "rssd19_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd18: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd18:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd18: sw0 {
+					regulator-name = "rssd18_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd18: sw1 {
+					regulator-name = "rssd18_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd17: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd17:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd17: sw0 {
+					regulator-name = "rssd17_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd17: sw1 {
+					regulator-name = "rssd17_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd20: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd20:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd20: sw0 {
+					regulator-name = "rssd20_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd20: sw1 {
+					regulator-name = "rssd20_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd21: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd21:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd21: sw0 {
+					regulator-name = "rssd21_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd21: sw1 {
+					regulator-name = "rssd21_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd22: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd22:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd22: sw0 {
+					regulator-name = "rssd22_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd22: sw1 {
+					regulator-name = "rssd22_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd24: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd24:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd24: sw0 {
+					regulator-name = "rssd24_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd24: sw1 {
+					regulator-name = "rssd24_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd23: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd23:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd23: sw0 {
+					regulator-name = "rssd23_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd23: sw1 {
+					regulator-name = "rssd23_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux10 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd25: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd25:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd25: sw0 {
+					regulator-name = "rssd25_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd25: sw1 {
+					regulator-name = "rssd25_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd26: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd26:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd26: sw0 {
+					regulator-name = "rssd26_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd26: sw1 {
+					regulator-name = "rssd26_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd27: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd27:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd27: sw0 {
+					regulator-name = "rssd27_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd27: sw1 {
+					regulator-name = "rssd27_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd32: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd32:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd32: sw0 {
+					regulator-name = "rssd32_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd32: sw1 {
+					regulator-name = "rssd32_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd31: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd31:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd31: sw0 {
+					regulator-name = "rssd31_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd31: sw1 {
+					regulator-name = "rssd31_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd30: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd30:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd30: sw0 {
+					regulator-name = "rssd30_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd30: sw1 {
+					regulator-name = "rssd30_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd29: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd29:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd29: sw0 {
+					regulator-name = "rssd29_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd29: sw1 {
+					regulator-name = "rssd29_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd28: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd17_32>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd28:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd28: sw0 {
+					regulator-name = "rssd28_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd28: sw1 {
+					regulator-name = "rssd28_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux18 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd03: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd03:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd03: sw0 {
+					regulator-name = "rssd03_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd03: sw1 {
+					regulator-name = "rssd03_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd02: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd02:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd02: sw0 {
+					regulator-name = "rssd02_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd02: sw1 {
+					regulator-name = "rssd02_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd01: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd01:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd01: sw0 {
+					regulator-name = "rssd01_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd01: sw1 {
+					regulator-name = "rssd01_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd04: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd04:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd04: sw0 {
+					regulator-name = "rssd04_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd04: sw1 {
+					regulator-name = "rssd04_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd05: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <48 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd05:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd05: sw0 {
+					regulator-name = "rssd05_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd05: sw1 {
+					regulator-name = "rssd05_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd08: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <51 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd08:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd08: sw0 {
+					regulator-name = "rssd08_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd08: sw1 {
+					regulator-name = "rssd08_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd07: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <50 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd07:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd07: sw0 {
+					regulator-name = "rssd07_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd07: sw1 {
+					regulator-name = "rssd07_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd06: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <49 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd06:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd06: sw0 {
+					regulator-name = "rssd06_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd06: sw1 {
+					regulator-name = "rssd06_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
+
+&i2cmux19 {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd14: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <57 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd14:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd14: sw0 {
+					regulator-name = "rssd14_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd14: sw1 {
+					regulator-name = "rssd14_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd13: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd13:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd13: sw0 {
+					regulator-name = "rssd13_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd13: sw1 {
+					regulator-name = "rssd13_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd12: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd12:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd12: sw0 {
+					regulator-name = "rssd12_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd12: sw1 {
+					regulator-name = "rssd12_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd11: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <54 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd11:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd11: sw0 {
+					regulator-name = "rssd11_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd11: sw1 {
+					regulator-name = "rssd11_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd10: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <53 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd10:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd10: sw0 {
+					regulator-name = "rssd10_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd10: sw1 {
+					regulator-name = "rssd10_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@5 {
+		reg = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd09: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <52 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd09:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd09: sw0 {
+					regulator-name = "rssd09_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd09: sw1 {
+					regulator-name = "rssd09_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@6 {
+		reg = <6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd15: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <58 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd15:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd15: sw0 {
+					regulator-name = "rssd15_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd15: sw1 {
+					regulator-name = "rssd15_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+	i2c@7 {
+		reg = <7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ssb_rssd16: regulator@3a {
+			compatible = "maxim,max5970";
+			reg = <0x3a>;
+			interrupt-parent = <&smb_svc_pex_rssd01_16>;
+			interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+			vss1-supply = <&p3v3_aux>;
+			vss2-supply = <&p12v>;
+
+			leds {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				led@0 {
+					reg = <0>;
+					label = "rssd16:green:power";
+					default-state = "off";
+				};
+			};
+
+			regulators {
+				sw0_ssb_rssd16: sw0 {
+					regulator-name = "rssd16_12v";
+					shunt-resistor-micro-ohms = <9000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <4500000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+				sw1_ssb_rssd16: sw1 {
+					regulator-name = "rssd16_3v3";
+					shunt-resistor-micro-ohms = <100000>;
+					regulator-over-current-protection;
+					regulator-oc-protection-microamp = <410000>;
+					regulator-enable-ramp-delay = <1000>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
new file mode 100644
index 000000000000..c8267c97a44e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-system1.dts
@@ -0,0 +1,1671 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "System1";
+	compatible = "ibm,system1-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c16 = &i2c8mux1chn0;
+		i2c17 = &i2c8mux1chn1;
+		i2c18 = &i2c8mux1chn2;
+		i2c19 = &i2c8mux1chn3;
+		i2c20 = &i2c8mux1chn4;
+		i2c21 = &i2c8mux1chn5;
+		i2c22 = &i2c8mux1chn6;
+		i2c23 = &i2c8mux1chn7;
+		i2c24 = &i2c3mux0chn0;
+		i2c25 = &i2c3mux0chn1;
+		i2c26 = &i2c3mux0chn2;
+		i2c27 = &i2c3mux0chn3;
+		i2c28 = &i2c3mux0chn4;
+		i2c29 = &i2c3mux0chn5;
+		i2c30 = &i2c3mux0chn6;
+		i2c31 = &i2c3mux0chn7;
+		i2c32 = &i2c6mux0chn0;
+		i2c33 = &i2c6mux0chn1;
+		i2c34 = &i2c6mux0chn2;
+		i2c35 = &i2c6mux0chn3;
+		i2c36 = &i2c6mux0chn4;
+		i2c37 = &i2c6mux0chn5;
+		i2c38 = &i2c6mux0chn6;
+		i2c39 = &i2c6mux0chn7;
+		i2c40 = &i2c7mux0chn0;
+		i2c41 = &i2c7mux0chn1;
+		i2c42 = &i2c7mux0chn2;
+		i2c43 = &i2c7mux0chn3;
+		i2c44 = &i2c7mux0chn4;
+		i2c45 = &i2c7mux0chn5;
+		i2c46 = &i2c7mux0chn6;
+		i2c47 = &i2c7mux0chn7;
+		i2c48 = &i2c8mux0chn0;
+		i2c49 = &i2c8mux0chn1;
+		i2c50 = &i2c8mux0chn2;
+		i2c51 = &i2c8mux0chn3;
+		i2c52 = &i2c8mux0chn4;
+		i2c53 = &i2c8mux0chn5;
+		i2c54 = &i2c8mux0chn6;
+		i2c55 = &i2c8mux0chn7;
+		i2c56 = &i2c14mux0chn0;
+		i2c57 = &i2c14mux0chn1;
+		i2c58 = &i2c14mux0chn2;
+		i2c59 = &i2c14mux0chn3;
+		i2c60 = &i2c14mux0chn4;
+		i2c61 = &i2c14mux0chn5;
+		i2c62 = &i2c14mux0chn6;
+		i2c63 = &i2c14mux0chn7;
+		i2c64 = &i2c15mux0chn0;
+		i2c65 = &i2c15mux0chn1;
+		i2c66 = &i2c15mux0chn2;
+		i2c67 = &i2c15mux0chn3;
+		i2c68 = &i2c15mux0chn4;
+		i2c69 = &i2c15mux0chn5;
+		i2c70 = &i2c15mux0chn6;
+		i2c71 = &i2c15mux0chn7;
+	};
+
+	chosen {
+		stdout-path = "uart5:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		eventlog: tcg-event-log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-bmc-ready {
+			gpios = <&gpio0 ASPEED_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bmc-hb {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-fan0-fault {
+			gpios = <&pca3 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan1-fault {
+			gpios = <&pca3 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan2-fault {
+			gpios = <&pca3 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan3-fault {
+			gpios = <&pca3 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan4-fault {
+			gpios = <&pca3 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan5-fault {
+			gpios = <&pca3 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-fan6-fault {
+			gpios = <&pca3 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-nvmed0-fault {
+			gpios = <&pca4 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed1-fault {
+			gpios = <&pca4 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed2-fault {
+			gpios = <&pca4 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-nvmed3-fault {
+			gpios = <&pca4 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-nvme0-presence {
+			label = "nvme0-presence";
+			gpios = <&pca4 0 GPIO_ACTIVE_LOW>;
+			linux,code = <0>;
+		};
+
+		event-nvme1-presence {
+			label = "nvme1-presence";
+			gpios = <&pca4 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-nvme2-presence {
+			label = "nvme2-presence";
+			gpios = <&pca4 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-nvme3-presence {
+			label = "nvme3-presence";
+			gpios = <&pca4 3 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&p12v_vd 0>, <&p5v_aux_vd 0>,
+			<&p5v_bmc_aux_vd 0>, <&p3v3_aux_vd 0>,
+			<&p3v3_bmc_aux_vd 0>, <&p1v8_bmc_aux_vd 0>,
+			<&adc1 4>, <&adc0 2>, <&adc1 0>,
+			<&p2v5_aux_vd 0>, <&adc1 7>;
+	};
+
+	p12v_vd: voltage-divider1 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1127/127 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <15>;
+		full-ohms = <133>;
+	};
+
+	p5v_aux_vd: voltage-divider2 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p5v_bmc_aux_vd: voltage-divider3 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1365/365 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <50>;
+		full-ohms = <187>;
+	};
+
+	p3v3_aux_vd: voltage-divider4 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p3v3_bmc_aux_vd: voltage-divider5 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 1698/698 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <14>;
+		full-ohms = <34>;
+	};
+
+	p1v8_bmc_aux_vd: voltage-divider6 {
+		compatible = "voltage-divider";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 4000/3000 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <3>;
+		full-ohms = <4>;
+	};
+
+	p2v5_aux_vd: voltage-divider7 {
+		compatible = "voltage-divider";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+
+		/*
+		 * Scale the system voltage by 2100/1100 to fit the ADC range.
+		 * Use small nominator to prevent integer overflow.
+		 */
+		output-ohms = <11>;
+		full-ohms = <21>;
+	};
+
+	p1v8_bmc_aux: fixedregulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&adc0 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+	vref-supply = <&p1v8_bmc_aux>;
+	aspeed,battery-sensing;
+
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiol4_unbiased: gpiol4 {
+		pins = "C15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol5_unbiased: gpiol5 {
+		pins = "F15";
+		bias-disable;
+	};
+
+	pinctrl_gpiol6_unbiased: gpiol6 {
+		pins = "B14";
+		bias-disable;
+	};
+
+	pinctrl_gpiol7_unbiased: gpiol7 {
+		pins = "C14";
+		bias-disable;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiol4_unbiased
+		&pinctrl_gpiol5_unbiased
+		&pinctrl_gpiol6_unbiased
+		&pinctrl_gpiol7_unbiased>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","bmc-tpm-reset","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","led-bmc-ready",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"pch-reset","","","","","flash-write-override","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","pch-ready","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","led-rear-enc-fault0","led-rear-enc-id0",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","rtc-battery-voltage-read-enable","","power-chassis-control","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"fpga-pgood","power-chassis-good","pch-pgood","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	pin-gpio-hog-0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_RTCRST_N";
+	};
+
+	pin-gpio-hog-1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "RST_SRTCRST_N";
+	};
+
+	pin-gpio-hog-2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_E3_SVC_PEX_INT_N";
+	};
+
+	pin-gpio-hog-3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 6) GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "isolate_errs_cpu1";
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <500000>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	led-controller@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nic1-perst";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "bmc-perst";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "reset-M2-SSD1-2-perst";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcie-perst1";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst2";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst3";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst4";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst5";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst6";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst7";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst8";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "PV-cp0-sw1stk4-perst";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp0-sw1stk5-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pe-cp-drv0-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv1-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "lom-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J101_N",
+			"PLUG_DETECT_PCIE_J102_N",
+			"PLUG_DETECT_PCIE_J103_N",
+			"PLUG_DETECT_PCIE_J104_N",
+			"PLUG_DETECT_PCIE_J105_N",
+			"PLUG_DETECT_PCIE_J106_N",
+			"PLUG_DETECT_PCIE_J107_N",
+			"PLUG_DETECT_PCIE_J108_N",
+			"PLUG_DETECT_M2_SSD1_N",
+			"PLUG_DETECT_NIC1_N",
+			"SEL_SMB_DIMM_CPU0",
+			"presence-ps2",
+			"presence-ps3",
+			"", "",
+			"PWRBRD_PLUG_DETECT2_N";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "intel,crps185";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "intel,crps185";
+		reg = <0x59>;
+	};
+
+	power-supply@5a {
+		compatible = "intel,crps185";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "intel,crps185";
+		reg = <0x5b>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c3mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c3mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c3mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c3mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c3mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c3mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c3mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c3mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	regulator@42 {
+		compatible = "infineon,ir38263";
+		reg = <0x42>;
+	};
+
+	regulator@43 {
+		compatible = "infineon,ir38060";
+		reg = <0x43>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	fan-controller@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+	};
+
+	fan-controller@54 {
+		compatible = "maxim,max31785a";
+		reg = <0x54>;
+	};
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c6mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			humidity-sensor@40 {
+				compatible = "ti,hdc1080";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			led-controller@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "enclosure-id-led";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "attention-led";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "enclosure-fault-rollup-led";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "power-on-led";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			temperature-sensor@76 {
+				compatible = "infineon,dps310";
+				reg = <0x76>;
+			};
+		};
+
+		i2c6mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c6mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c6mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	pca3: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca4: gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PE_NVMED0_EXP_PRSNT_N",
+			"PE_NVMED1_EXP_PRSNT_N",
+			"PE_NVMED2_EXP_PRSNT_N",
+			"PE_NVMED3_EXP_PRSNT_N",
+			"LED_FAULT_NVMED0",
+			"LED_FAULT_NVMED1",
+			"LED_FAULT_NVMED2",
+			"LED_FAULT_NVMED3",
+			"FAN0_PRESENCE_R_N",
+			"FAN1_PRESENCE_R_N",
+			"FAN2_PRESENCE_R_N",
+			"FAN3_PRESENCE_R_N",
+			"FAN4_PRESENCE_R_N",
+			"FAN5_PRESENCE_N",
+			"FAN6_PRESENCE_N",
+			"";
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c7mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c7mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c7mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c7mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c7mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c7mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c7mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c8mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c8mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c8mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c8mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c8mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c8mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c8mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c8mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c8mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c8mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c8mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c8mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c8mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c8mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	regulator@40 {
+		compatible = "infineon,ir38263";
+		reg = <0x40>;
+	};
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&eventlog>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+
+	regulator@41 {
+		compatible = "infineon,ir38263";
+		reg = <0x41>;
+	};
+
+	led-controller@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "efuse-12v-slots";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "efuse-3p3v-slot";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nic2-pert";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcie-perst9";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcie-perst10";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcie-perst11";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcie-perst12";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcie-perst13";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcie-perst14";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcie-perst15";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcie-perst16";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "PV-cp1-sw1stk4-perst";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "PV-cp1-sw1stk5-perst";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pe-cp-drv2-perst";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "pe-cp-drv3-perst";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	gpio@75 {
+		compatible = "nxp,pca9539";
+		reg = <0x75>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"PLUG_DETECT_PCIE_J109_N",
+			"PLUG_DETECT_PCIE_J110_N",
+			"PLUG_DETECT_PCIE_J111_N",
+			"PLUG_DETECT_PCIE_J112_N",
+			"PLUG_DETECT_PCIE_J113_N",
+			"PLUG_DETECT_PCIE_J114_N",
+			"PLUG_DETECT_PCIE_J115_N",
+			"PLUG_DETECT_PCIE_J116_N",
+			"PLUG_DETECT_M2_SSD2_N",
+			"PLUG_DETECT_NIC2_N",
+			"SEL_SMB_DIMM_CPU1",
+			"presence-ps0",
+			"presence-ps1",
+			"", "",
+			"PWRBRD_PLUG_DETECT1_N";
+	};
+
+	gpio@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SW1_BOOTRCVRYB1_N",
+			"SW1_BOOTRCVRYB0_N",
+			"SW2_BOOTRCVRYB1_N",
+			"SW2_BOOTRCVRYB0_N",
+			"SW3_4_BOOTRCVRYB1_N",
+			"SW3_4_BOOTRCVRYB0_N",
+			"SW5_BOOTRCVRYB1_N",
+			"SW5_BOOTRCVRYB0_N",
+			"SW6_BOOTRCVRYB1_N",
+			"SW6_BOOTRCVRYB0_N",
+			"SW1_RESET_N",
+			"SW3_RESET_N",
+			"SW4_RESET_N",
+			"SW2_RESET_N",
+			"SW5_RESET_N",
+			"SW6_RESET_N";
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			regulator@58 {
+				compatible = "mps,mp2973";
+				reg = <0x58>;
+			};
+		};
+
+		i2c14mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c14mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+		};
+
+		i2c14mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c14mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			regulator@40 {
+				compatible = "infineon,tda38640";
+				reg = <0x40>;
+			};
+
+			regulator@41 {
+				compatible = "infineon,tda38640";
+				reg = <0x41>;
+			};
+
+			regulator@58 {
+				compatible = "mps,mp2971";
+				reg = <0x58>;
+			};
+
+			regulator@5b {
+				compatible = "mps,mp2971";
+				reg = <0x5b>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c15mux0chn4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9548";
+				reg = <0x70>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c15mux1chn0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c15mux1chn1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c15mux1chn2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c15mux1chn3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				i2c15mux1chn4: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				i2c15mux1chn5: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				i2c15mux1chn6: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				i2c15mux1chn7: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		i2c15mux0chn5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c15mux0chn6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c15mux0chn7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			regulator@40 {
+				compatible = "infineon,ir38060";
+				reg = <0x40>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "ti,tmp432";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
index e9d714a46a60..79c6919b3570 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
@@ -3,6 +3,7 @@
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
 #include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "FP5280G2 BMC";
@@ -10,7 +11,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -53,10 +54,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
@@ -72,19 +72,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(B, 3)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 0)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 1)>;
@@ -94,53 +94,51 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
 			linux,code = <1>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
 			linux,code = <2>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <3>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		fan4-presence {
+		event-fan4-presence {
 			label = "fan4-presence";
 			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan5-presence {
+		event-fan5-presence {
 			label = "fan5-presence";
 			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan6-presence {
+		event-fan6-presence {
 			label = "fan6-presence";
 			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
 		};
 
-		fan7-presence {
+		event-fan7-presence {
 			label = "fan7-presence";
 			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <8>;
@@ -148,14 +146,48 @@
 	};
 
 	leds {
-	    compatible = "gpio-leds";
+		compatible = "gpio-leds";
+
+		power {
+			label = "power";
+			/* TODO: dummy gpio */
+			gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		init-ok {
+			label = "init-ok";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshealth {
+			label = "front-syshealth";
+			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+		};
 
-	    power {
-		    label = "power";
-		    /* TODO: dummy gpio */
-		    gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
-	    };
+		front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
 
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(Z, 7) GPIO_ACTIVE_LOW>;
+		};
 	};
 
 	iio-hwmon-battery {
@@ -172,6 +204,39 @@
 
 };
 
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","front-psu","checkstop","cfam-reset","","","init-ok",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"ps0-presence","ps1-presence","","","front-memory","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","front-fan","","","",
+	/*I0-I7*/	"front-syshealth","front-syshot","mux-gpios","enable-gpios","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","power","trans-gpios","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","identify",
+	/*AA0-AA7*/	"clock-gpios","","data-gpios","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 &fmc {
 	status = "okay";
 
@@ -180,7 +245,7 @@
 		label = "bmc";
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout.dtsi"
+#include "openbmc-flash-layout-64.dtsi"
 	};
 };
 
@@ -239,6 +304,9 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
 	use-ncsi;
 };
 
@@ -279,7 +347,7 @@
 		label = "outlet";
 	};
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -363,7 +431,7 @@
 &i2c7 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -721,12 +789,12 @@
 	status = "okay";
 
 	power-supply@58 {
-		compatible = "pmbus";
+		compatible = "inspur,ipsps1";
 		reg = <0x58>;
 	};
 
 	power-supply@59 {
-		compatible = "pmbus";
+		compatible = "inspur,ipsps1";
 		reg = <0x59>;
 	};
 };
@@ -745,19 +813,6 @@
 	memory-region = <&gfx_memory>;
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
-&gpio {
-	pin_gpio_b7 {
-		gpio-hog;
-		gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>;
-		output-high;
-		line-name = "BMC_INIT_OK";
-	};
-};
-
 &wdt1 {
 	aspeed,reset-type = "none";
 	aspeed,external-signal;
@@ -843,4 +898,10 @@
 
 };
 
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
 #include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
new file mode 100644
index 000000000000..92b9b3987c92
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "NF5280M6 BMC";
+	compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		<&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&gpio {
+	status = "okay";
+	/* Enable GPIOE0 and GPIOE2 pass-through by default */
+	pinctrl-names = "pass-through";
+	pinctrl-0 = <&pinctrl_gpie0_default
+			&pinctrl_gpie2_default>;
+	gpio-line-names =
+	/*A0-A7*/	"","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
+	/*B0-B7*/	"BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
+				"FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
+				"FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
+				"BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
+	/*E0-E7*/	"FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
+				"FM_BOARD_ID4","FM_BOARD_ID5","","",
+	/*F0-F7*/	"PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
+				"BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
+				"RST_GLB_RST_WARN_N",
+	/*G0-G7*/	"IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
+				"BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
+	/*H0-H7*/	"JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
+				"FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
+	/*I0-I7*/	"FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
+				"FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
+				"VGA_HSYNC","VGA_VSYNC","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
+	/*R0-R7*/	"SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
+				"DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
+				"RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
+	/*S0-S7*/	"BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
+				"GPIOS5_BMC","","GPIOS7_BMC",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
+				"GPIOZ5","","",
+	/*AA0-AA7*/	"FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
+				"FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	/* FP_LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+	};
+};
+
+&i2c4 {
+	/* IPMB */
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@33 {
+		compatible = "adi,adm1293";
+		reg = <0x33>;
+	};
+
+	adm1278@32 {
+		compatible = "adi,adm1293";
+		reg = <0x32>;
+	};
+
+	adm1278@20 {
+		compatible = "adi,adm1293";
+		reg = <0x20>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "inspur,ipsps1";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "inspur,ipsps1";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca4>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vuart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
index 2337ee23f5c4..7a78c34cff40 100644
--- a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-on5263m5.dts
@@ -11,7 +11,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 	};
 
 	memory {
@@ -77,6 +77,9 @@
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
 	use-ncsi;
 };
 
@@ -120,10 +123,6 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
index 22dade6393d0..da55e7b29fac 100644
--- a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-intel-s2600wf.dts
@@ -10,7 +10,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "earlyprintk";
+		bootargs = "earlycon";
 	};
 
 	memory@80000000 {
@@ -22,9 +22,9 @@
 		#size-cells = <1>;
 		ranges;
 
-		vga_memory: framebuffer@7f000000 {
+		vga_memory: framebuffer@9f000000 {
 			no-map;
-			reg = <0x7f000000 0x01000000>;
+			reg = <0x9f000000 0x01000000>; /* 16M */
 		};
 	};
 
@@ -69,6 +69,9 @@
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
 	use-ncsi;
 };
 
@@ -115,10 +118,6 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &pwm_tacho {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
new file mode 100644
index 000000000000..ec82af94e1fb
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-starscream.dts
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "STARSCREAM BMC";
+	compatible = "inventec,starscream-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-uid {
+			label = "UID_LED";
+			gpios = <&gpio0 186 GPIO_ACTIVE_LOW>;
+		};
+
+		led-heartbeat {
+			label = "HB_LED";
+			gpios = <&gpio0 127 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rmii";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+#include "openbmc-flash-layout.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <50000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+&i2c1 {
+	status = "okay";
+};
+&i2c2 {
+	status = "okay";
+};
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	// I2C EXPANDER
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// AMD SB-TSI CPU1
+			sbtsi@4c {
+				compatible = "amd,sbtsi";
+				reg = <0x4c>;
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			// AMD SB-TSI CPU2
+			sbtsi@48 {
+				compatible = "amd,sbtsi";
+				reg = <0x48>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	// I2C EXPANDER U153
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		usb_hub: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		riser1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		riser2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	// Motherboard Temp_U89
+	temperature-sensor@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+
+	// RunBMC Temp_U6
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	// I2C EXPANDER U40
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	// FRU RunBMC
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+	// FRU SCM
+	eeprom@51 {
+		compatible = "atmel,24c512";
+		reg = <0x51>;
+		pagesize = <128>;
+	};
+
+	// SCM Temp_U17
+	temperature-sensor@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/   "","","","","","","","",
+	/*B0-B7*/   "alert-psu0-smb-r-n","bmc-ready","","assert-cpu0-prochot-r-n",
+	"","","","",
+	/*C0-C7*/   "","","","","","","","",
+	/*D0-D7*/   "","","","","","","","",
+	/*E0-E7*/   "","","","","","","","",
+	/*F0-F7*/   "","","","","reset-sgpio-r-n","","","",
+	/*G0-G7*/   "","","scm-jtag-mux-select","","","","","",
+	/*H0-H7*/   "","","","","reset-out","power-out","","",
+	/*I0-I7*/   "","","","","","","irq-bmc-cpu0-buf-nmi-n","",
+	/*J0-J7*/   "","","","","","","","",
+	/*K0-K7*/   "","","","","","","","",
+	/*L0-L7*/   "","","","","","","","",
+	/*M0-M7*/   "","","","","","","","",
+	/*N0-N7*/   "","","ncsi-ocp-clk-en-n","","","","","",
+	/*O0-O7*/   "","","","","","","cpu1-thermal-trip-n","",
+	/*P0-P7*/   "","","","","","","","",
+	/*Q0-Q7*/   "cpu0-prochot-n","","cpu1-prochot-n","","cpu0-pe-rst0","","","",
+	/*R0-R7*/   "","","","","","","","",
+	/*S0-S7*/   "","","","",
+	"","PCH_SLP_S4_BMC_N","cpu0-thermtrip-n","alert-psu1-smb-r-n",
+	/*T0-T7*/   "","","","","","","","",
+	/*U0-U7*/   "","","","","","","","",
+	/*V0-V7*/   "bios-recovery-buf-n","","assert-cpu1-prochot-r-n","",
+	"power-chassis-good","","","",
+	/*W0-W7*/   "","","","","","","","",
+	/*X0-X7*/   "","","","","platform-type","","","",
+	/*Y0-Y7*/   "","","","","","","","",
+	/*Z0-Z7*/   "","cpld-power-break-n","","","","","","",
+	/*AA0-AA7*/ "","","","","","","","",
+	/*AB0-AB7*/ "","","","","","","","",
+	/*AC0-AC7*/ "","","","","","","","";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <64>;
+	bus-frequency = <1000000>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+	non-removable;
+	max-frequency = <52000000>;
+	bus-width = <8>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+	aspeed,vhub-downstream-ports = <7>;
+	aspeed,vhub-generic-endpoints = <21>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
new file mode 100644
index 000000000000..c713cb7a6187
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+       model = "TRANSFORMERS BMC";
+       compatible = "inventec,transformer-bmc", "aspeed,ast2600";
+
+       aliases {
+               serial4 = &uart5;
+       };
+
+       chosen {
+               stdout-path = &uart5;
+               bootargs = "console=ttyS4,115200n8";
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               // UID led
+               uid {
+                       label = "UID_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+               };
+
+               // Heart beat led
+               heartbeat {
+                       label = "HB_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&mac3 {
+       status = "okay";
+       phy-mode = "rgmii";
+       phy-handle = <&ethphy0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+       status = "okay";
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+#include "openbmc-flash-layout.dtsi"
+       };
+
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc2";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+       };
+};
+
+&spi1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_spi1_default>;
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bios";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <1>;
+               spi-rx-bus-width = <1>;
+       };
+};
+
+&wdt1 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+
+       //Set bmc' slave address;
+       bmc_slave@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&i2c3 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+       eeprom@50 {
+               compatible = "atmel,24c512";
+               reg = <0x50>;
+               pagesize = <128>;
+       };
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+
+       tmp75@49 {
+               compatible = "ti,tmp75";
+               reg = <0x49>;
+       };
+
+       tmp75@4f {
+               compatible = "ti,tmp75";
+               reg = <0x4f>;
+       };
+
+       tmp468@48 {
+               compatible = "ti,tmp468";
+               reg = <0x48>;
+       };
+};
+
+&i2c7 {
+       status = "okay";
+       adm1278@40 {
+               compatible = "adi,adm1278";
+               reg = <0x40>;
+       };
+};
+
+
+&i2c8 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+
+       eeprom@51 {
+               compatible = "atmel,24c512";
+               reg = <0x51>;
+               pagesize = <128>;
+       };
+
+       eeprom@53 {
+               compatible = "atmel,24c512";
+               reg = <0x53>;
+               pagesize = <128>;
+       };
+};
+
+&i2c9 {
+       // M.2
+       status = "okay";
+};
+
+&i2c10 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-mux@71 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x71>;
+       };
+
+       i2c-mux@73 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x73>;
+       };
+};
+
+&i2c11 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-mux@70 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x70>;
+
+               pcie_eeprom_riser1: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser2: i2c@1 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser3: i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <2>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+       };
+};
+
+&i2c12 {
+       status = "okay";
+
+       psu0:psu0@58 {
+               compatible = "pmbus";
+               reg = <0x58>;
+       };
+};
+
+&gpio0 {
+       status = "okay";
+       gpio-line-names =
+       /*A0-A7*/   "","","","","","","","",
+       /*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
+       /*C0-C7*/   "","","","","","","","",
+       /*D0-D7*/   "","","","","","","","",
+       /*E0-E7*/   "","","","","","","","",
+       /*F0-F7*/   "","","","","power-chassis-control","","","",
+       /*G0-G7*/   "","","jtag-mux","","","","","",
+       /*H0-H7*/   "","","","","reset-button","power-button","","",
+       /*I0-I7*/   "","","","","","","","",
+       /*J0-J7*/   "","","","","","","","",
+       /*K0-K7*/   "","","","","","","","",
+       /*L0-L7*/   "","","","","","","","",
+       /*M0-M7*/   "","","","","","","","",
+       /*N0-N7*/   "","","","","","","","",
+       /*O0-O7*/   "","","","","","","","",
+       /*P0-P7*/   "","","","tck-mux","","","","",
+       /*Q0-Q7*/   "","","","","","","","",
+       /*R0-R7*/   "","","","","","","","",
+       /*S0-S7*/   "","","","","","","","",
+       /*T0-T7*/   "","","","","","","","",
+       /*U0-U7*/   "","nmi-button","","","","","","",
+       /*V0-V7*/   "","","","","power-config-full-load","","","",
+       /*W0-W7*/   "","","","","","","","",
+       /*X0-X7*/   "","","","","","","","",
+       /*Y0-Y7*/   "","","","","","","","",
+       /*Z0-Z7*/   "","","","","","","","",
+       /*AA0-AA7*/ "","","","","","","","",
+       /*AB0-AB7*/ "","","","","","","","",
+       /*AC0-AC7*/ "","","","","","","","";
+};
+
+&lpc_snoop {
+       status = "okay";
+       snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+       status = "okay";
+};
+
+&emmc {
+       status = "okay";
+       non-removable;
+       max-frequency = <52000000>;
+       bus-width = <8>;
+};
+
+&vhub {
+       status = "okay";
+       aspeed,vhub-downstream-ports = <7>;
+       aspeed,vhub-generic-endpoints = <21>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
index d3695a32e8e0..4ad0f44af1ab 100644
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
@@ -27,7 +27,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -133,6 +133,9 @@
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
 	use-ncsi;
 };
 
@@ -205,7 +208,7 @@
 	 *	Slot 3
 	 */
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -246,7 +249,7 @@
 	 *	Slot 2,
 	 *	Slot 3
 	 */
-	i2c-switch@76 {
+	i2c-mux@76 {
 		compatible = "nxp,pca9546";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -402,161 +405,161 @@
 
 &gpio {
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 	};
 
-	pin_gpio_f0 {
+	pin-gpio-f0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "IRQ_BMC_PCH_NMI_R";
 	};
 
-	pin_gpio_f3 {
+	pin-gpio-f3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_BUS0_RST_OUT_N";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_SKT0_FAULT_LED";
 	};
 
-	pin_gpio_f5 {
+	pin-gpio-f5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_SKT1_FAULT_LED";
 	};
 
-	pin_gpio_g4 {
+	pin-gpio-g4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FAN_PWR_CTL_N";
 	};
 
-	pin_gpio_g7 {
+	pin-gpio-g7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_BMC_PCIE_I2CMUX_N";
 	};
 
-	pin_gpio_h2 {
+	pin-gpio-h2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PSU1_FFS_N_R";
 	};
 
-	pin_gpio_h3 {
+	pin-gpio-h3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PSU2_FFS_N_R";
 	};
 
-	pin_gpio_i3 {
+	pin-gpio-i3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_INTRUDED_COVER";
 	};
 
-	pin_gpio_j2 {
+	pin-gpio-j2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_BIOS_UPDATE_N";
 	};
 
-	pin_gpio_j3 {
+	pin-gpio-j3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_BMC_HDD_I2CMUX_N";
 	};
 
-	pin_gpio_s2 {
+	pin-gpio-s2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_VGA_SW";
 	};
 
-	pin_gpio_s4 {
+	pin-gpio-s4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
 		output;
 		line-name = "VBAT_EN_N";
 	};
 
-	pin_gpio_s6 {
+	pin-gpio-s6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PU_BMC_GPIOS6";
 	};
 
-	pin_gpio_y0 {
+	pin-gpio-y0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_NCSI_MUX_CTL_S0";
 	};
 
-	pin_gpio_y1 {
+	pin-gpio-y1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_NCSI_MUX_CTL_S1";
 	};
 
-	pin_gpio_z0 {
+	pin-gpio-z0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_RISER2_INT_N";
 	};
 
-	pin_gpio_z2 {
+	pin-gpio-z2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "I2C_RISER2_RESET_N";
 	};
 
-	pin_gpio_z3 {
+	pin-gpio-z3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_PCH_SCI_LPC_N";
 	};
 
-	pin_gpio_z7 {
+	pin-gpio-z7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_POST_CMPLT_N";
 	};
 
-	pin_gpio_aa0 {
+	pin-gpio-aa0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "HOST_BMC_USB_SEL";
 	};
 
-	pin_gpio_aa5 {
+	pin-gpio-aa5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
index 118eb8bbbf1b..fdcf4492fb4e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
@@ -27,7 +27,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -139,6 +139,9 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
 	use-ncsi;
 };
 
@@ -148,7 +151,7 @@
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
 
-&adc{
+&adc {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc0_default
@@ -172,7 +175,7 @@
 &i2c0 {
 	status = "okay";
 
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -208,7 +211,7 @@
 	status = "okay";
 	bus-frequency = <90000>;
 	HotSwap@10 {
-		compatible = "adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};
 
@@ -224,7 +227,7 @@
 
 &i2c3 {
 	status = "okay";
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -422,238 +425,238 @@
 
 &gpio {
 
-	pin_gpio_a1 {
+	pin-gpio-a1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "BMC_EMMC_RST_N";
 	};
 
-	pin_gpio_a3 {
+	pin-gpio-a3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
 		output-high;
 		line-name = "PCH_PWROK_BMC_FPGA";
 	};
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
 	};
 
-	pin_gpio_b7 {
+	pin-gpio-b7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
 		output-low;
 		line-name = "CPU_SM_WP";
 	};
 
-	pin_gpio_e0 {
+	pin-gpio-e0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "PDB_PSU_SEL";
 	};
 
-	pin_gpio_e2 {
+	pin-gpio-e2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "LOCATOR_LED_N";
 	};
 
-	pin_gpio_e5 {
+	pin-gpio-e5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_DBP_PRESENT_R1_N";
 	};
 
-	pin_gpio_e6 {
+	pin-gpio-e6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_ME_SECURITY_OVERRIDE_N";
 	};
 
-	pin_gpio_f0 {
+	pin-gpio-f0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "IRQ_BMC_PCH_NMI_R";
 	};
 
-	pin_gpio_f1 {
+	pin-gpio-f1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU2_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_f2 {
+	pin-gpio-f2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RM_THROTTLE_EN_N";
 	};
 
-	pin_gpio_f3 {
+	pin-gpio-f3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FM_PMBUS_ALERT_B_EN";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FORCE_NM_THROTTLE_N";
 	};
 
-	pin_gpio_f6 {
+	pin-gpio-f6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_CPU_PWR_DEBUG_N";
 	};
 
-	pin_gpio_g7 {
+	pin-gpio-g7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_PCIE_I2C_MUX_RST_N";
 	};
 
-	pin_gpio_h6 {
+	pin-gpio-h6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_DBP_PRESENT_R2_N";
 	};
 
-	pin_gpio_i3 {
+	pin-gpio-i3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPI_BMC_BIOS_WP_N";
 	};
 
-	pin_gpio_j1 {
+	pin-gpio-j1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_USB_SEL";
 	};
 
-	pin_gpio_j2 {
+	pin-gpio-j2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PDB_SMB_RST_N";
 	};
 
-	pin_gpio_j3 {
+	pin-gpio-j3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPI_BMC_BIOS_HOLD_N";
 	};
 
-	pin_gpio_l0 {
+	pin-gpio-l0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PDB_FAN_TACH_SEL";
 	};
 
-	pin_gpio_l1 {
+	pin-gpio-l1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SYS_RESET_BMC_FPGA_N";
 	};
 
-	pin_gpio_l4 {
+	pin-gpio-l4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_EFUSE_FAN_G1_EN";
 	};
 
-	pin_gpio_l5 {
+	pin-gpio-l5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_EFUSE_FAN_G2_EN";
 	};
 
-	pin_gpio_r6 {
+	pin-gpio-r6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU3_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_r7 {
+	pin-gpio-r7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "CPU4_PROCDIS_BMC_N";
 	};
 
-	pin_gpio_s1 {
+	pin-gpio-s1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "DBP_SYSPWROK_BMC";
 	};
 
-	pin_gpio_s2 {
+	pin-gpio-s2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "PCH_RST_RSMRST_N";
 	};
 
-	pin_gpio_s6 {
+	pin-gpio-s6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_HW_STRAP_5";
 	};
 
-	pin_gpio_z3 {
+	pin-gpio-z3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "FM_BMC_PCH_SCI_LPC_N";
 	};
 
-	pin_gpio_aa0 {
+	pin-gpio-aa0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "FW_PSU_ALERT_EN_N";
 	};
 
-	pin_gpio_aa4 {
+	pin-gpio-aa4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "DBP_CPU_PREQ_N";
 	};
 
-	pin_gpio_ab3 {
+	pin-gpio-ab3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "BMC_WDTRST";
 	};
 
-	pin_gpio_ac6 {
+	pin-gpio-ac6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
index 73319917cb74..3ef8358ff764 100644
--- a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-microsoft-olympus.dts
@@ -11,7 +11,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@40000000 {
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
new file mode 100644
index 000000000000..4de38613b0ea
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
@@ -0,0 +1,1178 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "AST2600 GB200NVL BMC";
+	compatible = "nvidia,gb200nvl-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial2 = &uart3;
+		serial4 = &uart5;
+		i2c16   = &imux16;
+		i2c17   = &imux17;
+		i2c18   = &imux18;
+		i2c19   = &imux19;
+		i2c20   = &imux20;
+		i2c21   = &imux21;
+		i2c22   = &imux22;
+		i2c23   = &imux23;
+		i2c24   = &imux24;
+		i2c25   = &imux25;
+		i2c26   = &imux26;
+		i2c27   = &imux27;
+		i2c28   = &imux28;
+		i2c29   = &imux29;
+		i2c30   = &imux30;
+		i2c31   = &imux31;
+		i2c32   = &imux32;
+		i2c33   = &imux33;
+		i2c34   = &imux34;
+		i2c35   = &imux35;
+		i2c36   = &imux36;
+		i2c37   = &imux37;
+		i2c38   = &imux38;
+		i2c39   = &imux39;
+		i2c40	= &e1si2c0;
+		i2c41	= &e1si2c1;
+		i2c42	= &e1si2c2;
+		i2c43	= &e1si2c3;
+		i2c44	= &e1si2c4;
+		i2c45	= &e1si2c5;
+		i2c46	= &e1si2c6;
+		i2c47	= &e1si2c7;
+		i2c48	= &i2c17mux0;
+		i2c49	= &i2c17mux1;
+		i2c50	= &i2c17mux2;
+		i2c51	= &i2c17mux3;
+		i2c52	= &i2c25mux0;
+		i2c53	= &i2c25mux1;
+		i2c54	= &i2c25mux2;
+		i2c55	= &i2c25mux3;
+		i2c56	= &i2c29mux0;
+		i2c57	= &i2c29mux1;
+		i2c58	= &i2c29mux2;
+		i2c59	= &i2c29mux3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		ramoops@a0000000 {
+			compatible = "ramoops";
+			reg = <0xa0000000 0x100000>; /* 1MB */
+			record-size = <0x10000>; /* 64KB */
+			max-reason = <2>; /* KMSG_DUMP_OOPS */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "uid_led";
+			gpios = <&sgpiom0 27 GPIO_ACTIVE_LOW>;
+		};
+		led-1 {
+			label = "fault_led";
+			gpios = <&sgpiom0 29 GPIO_ACTIVE_LOW>;
+		};
+		led-2 {
+			label = "power_led";
+			gpios = <&sgpiom0 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	buttons {
+		button-power {
+			label = "power-btn";
+			gpio = <&sgpiom0 156 GPIO_ACTIVE_LOW>;
+		};
+		button-uid {
+			label = "uid-btn";
+			gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	standby_power_regulator: standby-power-regulator {
+		status = "okay";
+		compatible = "regulator-fixed";
+		regulator-name = "standby_power";
+		gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+// Enable Primary flash on FMC for bring up activity
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		compatible = "jedec,spi-nor";
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot@0 {
+				// 896KB
+				reg = <0x0 0xe0000>;
+				label = "u-boot";
+			};
+
+			kernel@100000 {
+				// 9MB
+				reg = <0x100000 0x900000>;
+				label = "kernel";
+			};
+
+			rofs@a00000 {
+				// 55292KB (extends to end of 64MB SPI - 4KB)
+				reg = <0xa00000 0x35FF000>;
+				label = "rofs";
+			};
+		};
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	// Data SPI is 64MB in size
+	flash@0 {
+		status = "okay";
+		label = "config";
+		spi-max-frequency = <50000000>;
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u-boot-env@0 {
+				// 256KB
+				reg = <0x0 0x40000>;
+				label = "u-boot-env";
+			};
+
+			rwfs@40000 {
+				// 16MB
+				reg = <0x40000 0x1000000>;
+				label = "rwfs";
+			};
+
+			log@1040000 {
+				// 40MB
+				reg = <0x1040000 0x2800000>;
+				label = "log";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	// Enabling SOL
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Debug Console
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+	ethphy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+/*
+ * Enable USB port A as device (via the virtual hub) to host
+ */
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+// USB 2.0 to HMC, on USB Port B
+&ehci1 {
+	status = "okay";
+};
+
+// USB 1.0
+&uhci {
+	status = "okay";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	gpio-line-names =
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RUN_POWER_FAULT_L-I","SYS_RST_IN_L-O",
+		"RUN_POWER_PG-I","PWR_BRAKE_L-O",
+		"SYS_RST_OUT_L-I","RUN_POWER_EN-O",
+		"L0L1_RST_REQ_OUT_L-I","SHDN_FORCE_L-O",
+		"L2_RST_REQ_OUT_L-I","SHDN_REQ_L-O",
+		"SHDN_OK_L-I","UID_LED_N-O",
+		"BMC_I2C1_FPGA_ALERT_L-I","SYS_FAULT_LED_N-O",
+		"BMC_I2C0_FPGA_ALERT_L-I","PWR_LED_N-O",
+		"FPGA_RSVD_FFU3-I","",
+		"FPGA_RSVD_FFU2-I","",
+		"FPGA_RSVD_FFU1-I","",
+		"FPGA_RSVD_FFU0-I","BMC_I2C_SSIF_ALERT_L-O",
+		"CPU_BOOT_DONE-I","JTAG_MUX_SELECT-O",
+		"SPI_BMC_FPGA_INT_L-I","RTC_CLR_L-O",
+		"THERM_BB_WARN_L-I","UART_MUX_SEL-O",
+		"THERM_BB_OVERT_L-I","",
+		"CPU0_UPHY3_PRSNT1_L-I","IOBRD0_RUN_POWER_EN-O",
+		"CPU0_UPHY3_PRSNT0_L-I","IOBRD1_RUN_POWER_EN-O",
+		"CPU0_UPHY2_PRSNT1_L-I","FPGA_RSVD_FFU4-O",
+		"CPU0_UPHY2_PRSNT0_L-I","FPGA_RSVD_FFU5-O",
+		"CPU0_UPHY1_PRSNT1_L-I","FPGA_RSVD_FFU6-O",
+		"CPU0_UPHY1_PRSNT0_L-I","FPGA_RSVD_FFU7-O",
+		"CPU0_UPHY0_PRSNT1_L-I","RSVD_NV_PLT_DETECT-O",
+		"CPU0_UPHY0_PRSNT0_L-I","SPI1_INT_L-O",
+		"CPU1_UPHY3_PRSNT1_L-I","",
+		"CPU1_UPHY3_PRSNT0_L-I","HMC_EROT_MUX_STATUS",
+		"CPU1_UPHY2_PRSNT1_L-I","",
+		"CPU1_UPHY2_PRSNT0_L-I","",
+		"CPU1_UPHY1_PRSNT1_L-I","",
+		"CPU1_UPHY1_PRSNT0_L-I","",
+		"CPU1_UPHY0_PRSNT1_L-I","",
+		"CPU1_UPHY0_PRSNT0_L-I","",
+		"FAN1_PRESENT_L-I","",
+		"FAN0_PRESENT_L-I","",
+		"","",
+		"IPEX_CABLE_PRSNT_L-I","",
+		"M2_1_PRSNT_L-I","",
+		"M2_0_PRSNT_L-I","",
+		"CPU1_UPHY4_PRSNT1_L-I","",
+		"CPU0_UPHY4_PRSNT0_L-I","",
+		"","",
+		"I2C_RTC_ALERT_L-I","",
+		"FAN7_PRESENT_L-I","",
+		"FAN6_PRESENT_L-I","",
+		"FAN5_PRESENT_L-I","",
+		"FAN4_PRESENT_L-I","",
+		"FAN3_PRESENT_L-I","",
+		"FAN2_PRESENT_L-I","",
+		"IOBRD0_IOX_INT_L-I","",
+		"IOBRD1_PRSNT_L-I","",
+		"IOBRD0_PRSNT_L-I","",
+		"IOBRD1_PWR_GOOD-I","",
+		"IOBRD0_PWR_GOOD-I","",
+		"","",
+		"","",
+		"FAN_FAIL_IN_L-I","",
+		"","",
+		"","",
+		"","",
+		"PDB_CABLE_PRESENT_L-I","",
+		"","",
+		"CHASSIS_PWR_BRK_L-I","",
+		"","",
+		"IOBRD1_IOX_INT_L-I","",
+		"10GBE_SMBALRT_L-I","",
+		"PCIE_WAKE_L-I","",
+		"I2C_M21_ALERT_L-I","",
+		"I2C_M20_ALERT_L-I","",
+		"TRAY_FAST_SHDN_L-I","",
+		"UID_BTN_N-I","",
+		"PWR_BTN_L-I","",
+		"PSU_SMB_ALERT_L-I","",
+		"","",
+		"","",
+		"NODE_LOC_ID[0]-I","",
+		"NODE_LOC_ID[1]-I","",
+		"NODE_LOC_ID[2]-I","",
+		"NODE_LOC_ID[3]-I","",
+		"NODE_LOC_ID[4]-I","",
+		"NODE_LOC_ID[5]-I","",
+		"FAN10_PRESENT_L-I","",
+		"FAN9_PRESENT_L-I","",
+		"FAN8_PRESENT_L-I","",
+		"FPGA1_READY_HMC-I","",
+		"DP_HPD-I","",
+		"HMC_I2C3_FPGA_ALERT_L-I","",
+		"HMC_I2C2_FPGA_ALERT_L-I","",
+		"FPGA0_READY_HMC-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"LEAK_DETECT_ALERT_L-I","",
+		"MOD1_B2B_CABLE_PRESENT_L-I","",
+		"MOD1_CLINK_CABLE_PRESENT_L-I","",
+		"FAN11_PRESENT_L-I","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"","",
+		"RSVD_SGPIO_IN_CRC[0]","RSVD_SGPIO_O_CRC[7]",
+		"RSVD_SGPIO_IN_CRC[1]","RSVD_SGPIO_O_CRC[6]",
+		"RSVD_SGPIO_IN_CRC[2]","RSVD_SGPIO_O_CRC[5]",
+		"RSVD_SGPIO_IN_CRC[3]","RSVD_SGPIO_O_CRC[4]",
+		"RSVD_SGPIO_IN_CRC[4]","RSVD_SGPIO_O_CRC[3]",
+		"RSVD_SGPIO_IN_CRC[5]","RSVD_SGPIO_O_CRC[2]",
+		"RSVD_SGPIO_IN_CRC[6]","RSVD_SGPIO_O_CRC[1]",
+		"RSVD_SGPIO_IN_CRC[7]","RSVD_SGPIO_O_CRC[0]";
+};
+
+// I2C1, SSIF IPMI interface
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+// I2C2
+// BMC_I2C1_FPGA - Secondary FPGA
+// HMC EROT
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C3
+// BMC_I2C0_FPGA - Primary FPGA
+// HMC FRU EEPROM
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C4
+&i2c3 {
+	status = "okay";
+};
+
+// I2C5
+// RTC Driver
+// IO Expander
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x21
+	exp4: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"RTC_MUX_SEL-O",
+			"PCI_MUX_SEL-O",
+			"TPM_MUX_SEL-O",
+			"FAN_MUX-SEL-O",
+			"SGMII_MUX_SEL-O",
+			"DP_MUX_SEL-O",
+			"UPHY3_USB_SEL-O",
+			"NCSI_MUX_SEL-O",
+			"BMC_PHY_RST-O",
+			"RTC_CLR_L-O",
+			"BMC_12V_CTRL-O",
+			"PS_RUN_IO0_PG-I",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C6
+// Module 0/1 I2C MUX x3
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c17mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c17mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c17mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c17mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux20: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux21: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"RST_CX_0_L-O",
+					"RST_CX_1_L-O",
+					"CX0_SSD0_PRSNT_L-I",
+					"CX1_SSD1_PRSNT_L-I",
+					"CX_BOOT_CMPLT_CX0-I",
+					"CX_BOOT_CMPLT_CX1-I",
+					"CX_TWARN_CX0_L-I",
+					"CX_TWARN_CX1_L-I",
+					"CX_OVT_SHDN_CX0-I",
+					"CX_OVT_SHDN_CX1-I",
+					"FNP_L_CX0-O",
+					"FNP_L_CX1-O",
+					"",
+					"MCU_GPIO-I",
+					"MCU_RST_N-O",
+					"MCU_RECOVERY_N-O";
+			};
+		};
+
+		imux22: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x73>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@70 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+				vdd-supply = <&standby_power_regulator>;
+
+				i2c25mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c25mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c25mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c25mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux28: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux29: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x74>;
+				i2c-mux-idle-disconnect;
+
+				i2c29mux0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c29mux1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c29mux2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c29mux3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		imux30: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux31: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
+				gpio-line-names =
+					"SEC_RST_CX_0_L-O",
+					"SEC_RST_CX_1_L-O",
+					"SEC_CX0_SSD0_PRSNT_L-I",
+					"SEC_CX1_SSD1_PRSNT_L-I",
+					"SEC_CX_BOOT_CMPLT_CX0-I",
+					"SEC_CX_BOOT_CMPLT_CX1-I",
+					"SEC_CX_TWARN_CX0_L-I",
+					"SEC_CX_TWARN_CX1_L-I",
+					"SEC_CX_OVT_SHDN_CX0-I",
+					"SEC_CX_OVT_SHDN_CX1-I",
+					"SEC_FNP_L_CX0-O",
+					"SEC_FNP_L_CX1-O",
+					"",
+					"SEC_MCU_GPIO-I",
+					"SEC_MCU_RST_N-O",
+					"SEC_MCU_RECOVERY_N-O";
+				};
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		imux36: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux37: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux38: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux39: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C7
+// Module 0/1 Leak Sensors
+// Module 0/1 Fan Controllers
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pmic@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pmic@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+		shunt-resistor-micro-ohms = <190>;
+		status = "okay";
+	};
+
+	pwm@20 {
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	pwm@23 {
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	pwm@2c {
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	pwm@2f {
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+};
+
+// I2C9
+// M.2
+&i2c8 {
+	status = "okay";
+	clock-frequency = <400000>;
+	multi-master;
+};
+
+// I2C10
+// HMC IO Expander
+// Module 0/1 IO Expanders
+&i2c9 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// Module 0, Expander @0x20
+	exp0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB_HUB_RESET_L-O",
+			"NCSI_CS1_SEL-O",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	exp1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L-I",
+			"SEC_FPGA_READY_BMC-I",
+			"",
+			"",
+			"",
+			"",
+			"SEC_FPGA_EROT_FATAL_ERROR_L-I",
+			"SEC_WP_HW_EXT_CTRL_L-O",
+			"SEC_EROT_FPGA_RST_L-O",
+			"SEC_FPGA_EROT_RECOVERY_L-O",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"SEC_USB2_HUB_RST_L-O",
+			"",
+			"",
+			"",
+			"SEC_I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// HMC Expander @0x27
+	exp2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// HMC Expander @0x74
+	exp3: gpio@74 {
+		compatible = "nxp,pca9555";
+		reg = <0x74>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
+		gpio-line-names =
+			"IOB_PRSNT_L",
+			"IOB_DP_HPD",
+			"IOX_BMC_RESET",
+			"IOB_IOEXP_INT_L",
+			"IOB_UID_LED_L",
+			"IOB_UID_BTN_L",
+			"IOB_SYS_RST_BTN_L",
+			"IOB_PWR_LED_L",
+			"IOB_PWR_BTN_L",
+			"IOB_PHY_RST",
+			"CPLD_JTAG_MUX_SEL",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+};
+
+// I2C11
+// BMC FRU EEPROM
+// BMC Temp Sensor
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	// BMC FRU EEPROM - 256 bytes
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <8>;
+	};
+};
+
+// I2C12
+&i2c11 {
+	status = "disabled";
+};
+
+// I2C13
+&i2c12 {
+	status = "disabled";
+};
+
+// I2C14
+// Module 0 UPHY3 SMBus
+&i2c13 {
+	status = "disabled";
+};
+
+// I2C15
+// Module 1 UPHY3 SMBus
+&i2c14 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 0-3
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+// I2C16
+&i2c15 {
+	status = "okay";
+	clock-frequency = <100000>;
+	multi-master;
+
+	//E1.S drive slot 4-7
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
+
+		e1si2c4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		e1si2c5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		e1si2c6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		e1si2c7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&rng {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "", "",
+		/*C0-C7*/ "SGPIO_I2C_MUX_SEL-O", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "UART1_MUX_SEL-O", "", "FPGA_PEX_RST_L-O", "", "",
+		/*E0-E7*/ "RTL8221_PHY_RST_L-O", "RTL8211_PHY_INT_L-I",	"", "UART3_MUX_SEL-O",
+					"", "", "", "SGPIO_BMC_EN-O",
+		/*F0-F7*/ "", "", "", "", "", "", "", "",
+		/*G0-G7*/ "", "", "", "", "", "", "", "",
+		/*H0-H7*/ "", "", "", "", "", "", "", "",
+		/*I0-I7*/ "", "", "", "", "", "QSPI2_RST_L-O", "GLOBAL_WP_BMC-O", "BMC_DDR4_TEN-O",
+		/*J0-J7*/ "", "", "", "", "", "", "", "",
+		/*K0-K7*/ "", "", "", "", "", "", "", "",
+		/*L0-L7*/ "", "", "", "", "", "", "", "",
+		/*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "FPGA_RST_L-O", "STBY_POWER_EN-O",
+					"STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "",
+		/*N0-N7*/ "", "", "", "", "", "", "", "",
+		/*O0-O7*/ "", "", "", "", "", "", "", "",
+		/*P0-P7*/ "", "", "", "", "", "", "", "",
+		/*Q0-Q7*/ "", "", "", "", "", "", "", "",
+		/*R0-R7*/ "", "", "", "", "", "", "", "",
+		/*S0-S7*/ "", "", "", "", "", "", "", "",
+		/*T0-T7*/ "", "", "", "", "", "", "", "",
+		/*U0-U7*/ "", "", "", "", "", "", "", "",
+		/*V0-V7*/ "AP_EROT_REQ-O", "EROT_AP_GNT-I", "", "","PCB_TEMP_ALERT-I", "","", "",
+		/*W0-W7*/ "", "", "", "", "", "", "", "",
+		/*X0-X7*/ "", "", "TPM_MUX_SEL-O", "", "", "", "", "",
+		/*Y0-Y7*/ "", "", "", "EMMC_RST-O", "","", "", "",
+		/*Z0-Z7*/ "BMC_READY-O","", "", "", "", "", "", "";
+};
+
+&gpio1 {
+	/* 36 1.8V GPIOs */
+	gpio-line-names =
+		/*A0-A7*/ "", "", "", "", "", "", "", "",
+		/*B0-B7*/ "", "", "", "", "", "", "IO_EXPANDER_INT_L-I","",
+		/*C0-C7*/ "", "", "", "", "", "", "", "",
+		/*D0-D7*/ "", "", "", "", "", "", "SPI_HOST_TPM_RST_L-O", "SPI_BMC_FPGA_INT_L-I",
+		/*E0-E7*/ "", "", "", "", "", "", "", "";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
index de95112e2a04..9f2ad551255d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
@@ -11,7 +11,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -52,18 +52,18 @@
 			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
 		};
 		bmc_err {
-			lable = "BMC_fault";
+			label = "BMC_fault";
 			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
 		};
 
 		sys_err {
-			lable = "Sys_fault";
+			label = "Sys_fault";
 			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		};
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 
@@ -178,6 +178,9 @@
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
 	use-ncsi;
 };
 
@@ -260,54 +263,50 @@
 	status = "okay";
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &gpio {
-	pin_gpio_b0 {
+	pin-gpio-b0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_HDD1_PWR_EN";
 	};
 
-	pin_gpio_b5 {
+	pin-gpio-b5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_USB1_OCI2";
 	};
 
-	pin_gpio_h5 {
+	pin-gpio-h5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_CP0_PERST_ENABLE_R";
 	};
 
-	pin_gpio_z2 {
+	pin-gpio-z2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "RST_PCA9546_U177_N";
 	};
 
-	pin_gpio_aa6 {
+	pin-gpio-aa6-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_CP0_RESET_N";
 	};
 
-	pin_gpio_aa7 {
+	pin-gpio-aa7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_TPM_RESET_N";
 	};
 
-	pin_gpio_ab0 {
+	pin-gpio-ab0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
new file mode 100644
index 000000000000..6c8b966ffccc
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Mowgli BMC";
+	compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
+
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 2)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 0)>;
+		};
+
+		button-id {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+		};
+
+		fan4 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-12v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>;
+	};
+
+	iio-hwmon-5v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 1>;
+	};
+
+	iio-hwmon-3v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 2>;
+	};
+
+	iio-hwmon-vdd {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>;
+	};
+
+	iio-hwmon-vcs {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>;
+	};
+
+	iio-hwmon-vdn {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	iio-hwmon-vio {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 9>;
+	};
+
+	iio-hwmon-vddra {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	iio-hwmon-vddrb {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 13>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* CPU MFG CONN */
+
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* APSS */
+	/* CPLD */
+
+	/* PCA9516 (repeater) ->
+	 *    CLK Buffer 9FGS9092
+	 *    Power Supply 0
+	 *    Power Supply 1
+	 *    PCA 9552 LED
+	 */
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* CP0 VDD & VCS : IR35221 */
+	/* CP0 VDN & VIO : IR35221 */
+	/* CP0 VDDR : IR35221 */
+
+	ir35221@28 {
+		compatible = "infineon,ir35221";
+		reg = <0x28>;
+	};
+
+	ir35221@29 {
+		compatible = "infineon,ir35221";
+		reg = <0x29>;
+	};
+
+	ir35221@2d {
+		compatible = "infineon,ir35221";
+		reg = <0x2d>;
+	};
+
+};
+
+&i2c5 {
+	status = "disabled";
+};
+
+&i2c6 {
+	status = "disabled";
+};
+
+&i2c7 {
+	status = "disabled";
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/* PCIe G3 x16 slot */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* CPLD */
+	/* TPM */
+	/* RTC RX8900CE */
+	/* TMP275A */
+	/* TMP275A */
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
new file mode 100644
index 000000000000..ce6d30ddf07c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Nicole BMC";
+	compatible = "yadro,nicole-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "platform:green:power";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			label = "platform:blue:indicator";
+			gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		fault {
+			label = "platform:red:fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		attention {
+			label = "platform:yellow:alarm";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	/* CPU0 characterization connector */
+};
+
+&i2c3 {
+	status = "okay";
+	/* CLK GEN SI5338 */
+};
+
+&i2c4 {
+	status = "okay";
+	/* Voltage regulators for CPU0 */
+};
+
+&i2c5 {
+	status = "okay";
+	/* Voltage regulators for CPU1 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	/* CPLD */
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","bmc_power_up","sys_pwrok_buf",
+			"func_mode0","func_mode1","func_mode2","","",
+	/*E0-E7*/	"","ncsi_cfg","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","power-button","","","","","",
+	/*P0-P7*/	"","fsi-trans","pm_rtc_adc_en","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","software_pwrgood","","","","","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","led-attention","fsi-data","led-fault",
+			"led-power","","","led-identify",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	func-mode0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func-mode1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func-mode2-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq-cont-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	ncsi-cfg-hog {
+		gpio-hog;
+		input;
+		gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
index b0cb34ccb135..7953059a6c67 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
@@ -10,7 +10,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@40000000 {
@@ -55,7 +55,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2400-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
 
@@ -73,7 +73,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(P, 5)>;
@@ -87,6 +87,7 @@
 		status = "okay";
 		m25p,fast-read;
 		label = "bmc";
+		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout.dtsi"
 	};
 };
@@ -99,6 +100,7 @@
 	flash@0 {
 		status = "okay";
 		m25p,fast-read;
+		spi-max-frequency = <50000000>;
 		label = "pnor";
 	};
 };
@@ -149,7 +151,7 @@
 	};
 
 	rtc@68 {
-		compatible = "dallas,ds3231";
+		compatible = "maxim,ds3231";
 		reg = <0x68>;
 	};
 };
@@ -207,140 +209,140 @@
 };
 
 &gpio {
-	pin_func_mode0 {
+	pin-func-mode0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode0";
 	};
 
-	pin_func_mode1 {
+	pin-func-mode1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode1";
 	};
 
-	pin_func_mode2 {
+	pin-func-mode2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
 		output-low;
 		line-name = "func_mode2";
 	};
 
-	pin_gpio_a0 {
+	pin-gpio-a0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_FAN_RESERVED_N";
 	};
 
-	pin_gpio_a1 {
+	pin-gpio-a1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_WDT_N";
 	};
 
-	pin_gpio_b1 {
+	pin-gpio-b1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_BOOT_MODE";
 	};
 
-	pin_gpio_b2 {
+	pin-gpio-b2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "APSS_RESET_N";
 	};
 
-	pin_gpio_b7 {
+	pin-gpio-b7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SPIVID_STBY_RESET_N";
 	};
 
-	pin_gpio_d1 {
+	pin-gpio-d1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_POWER_UP";
 	};
 
-	pin_gpio_f1 {
+	pin-gpio-f1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_BATTERY_TEST";
 	};
 
-	pin_gpio_f4 {
+	pin-gpio-f4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "AST_HW_FAULT_N";
 	};
 
-	pin_gpio_f5 {
+	pin-gpio-f5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "AST_SYS_FAULT_N";
 	};
 
-	pin_gpio_f7 {
+	pin-gpio-f7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FULL_SPEED_N";
 	};
 
-	pin_gpio_g3 {
+	pin-gpio-g3-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "BMC_FAN_ERROR_N";
 	};
 
-	pin_gpio_g4 {
+	pin-gpio-g4-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_WDT_RST1_P";
 	};
 
-	pin_gpio_g5 {
+	pin-gpio-g5-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_WDT_RST2_P";
 	};
 
-	pin_gpio_h0 {
+	pin-gpio-h0-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "PE_SLOT_TEST_EN_N";
 	};
 
-	pin_gpio_h1 {
+	pin-gpio-h1-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
 		input;
 		line-name = "BMC_RTCRST_N";
 	};
 
-	pin_gpio_h2 {
+	pin-gpio-h2-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
 		line-name = "SYS_PWROK_BMC";
 	};
 
-	pin_gpio_h7 {
+	pin-gpio-h7-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
new file mode 100644
index 000000000000..a0263d969e51
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Romulus BMC";
+	compatible = "ibm,romulus-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		id-button {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Q, 7)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	/* PCIe slot 1 (x8) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* PCIe slot 2 (x16) */
+	status = "okay";
+};
+
+&i2c8 {
+	/* PCIe slot 3 (x16) */
+	status = "okay";
+};
+
+&i2c9 {
+	/* PCIe slot 4 (x16) */
+	status = "okay";
+};
+
+&i2c10 {
+	/* PCIe slot 5 (x8) */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","nic_func_mode0","nic_func_mode1","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","led-fault","",
+				"led-identify","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","","fsi-trans","","","led-power","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","fsi-data","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	nic-func-mode0-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	nic-func-mode1-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq-cont-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
new file mode 100644
index 000000000000..b31eb8e58c6b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -0,0 +1,882 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Tacoma";
+	compatible = "ibm,tacoma-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@b8000000 {
+			no-map;
+			reg = <0xb8000000 0x4000000>; /* 64M */
+		};
+
+		ramoops@bc000000 {
+			compatible = "ramoops";
+			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;	/* 16M */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"fsi-mux","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"power-button","","","checkstop","","presence-ps1","","led-rear-fault",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","presence-ps0","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"led-rear-power","led-rear-id","","usb-power","","","","",
+	/*P0-P7*/	"","","","","","bmc-tpm-reset","","",
+	/*Q0-Q7*/	"cfam-reset","","","","","","","fsi-routing",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam0_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam0_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam0_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam0_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam0_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam0_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam0_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam0_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam1_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam1_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam1_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam1_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam1_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam1_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam1_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam1_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam1_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c102 = &cfam0_i2c2;
+		i2c103 = &cfam0_i2c3;
+		i2c104 = &cfam0_i2c4;
+		i2c105 = &cfam0_i2c5;
+		i2c106 = &cfam0_i2c6;
+		i2c107 = &cfam0_i2c7;
+		i2c108 = &cfam0_i2c8;
+		i2c109 = &cfam0_i2c9;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c200 = &cfam1_i2c0;
+		i2c201 = &cfam1_i2c1;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c204 = &cfam1_i2c4;
+		i2c205 = &cfam1_i2c5;
+		i2c206 = &cfam1_i2c6;
+		i2c207 = &cfam1_i2c7;
+		i2c208 = &cfam1_i2c8;
+		i2c209 = &cfam1_i2c9;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c212 = &cfam1_i2c12;
+		i2c213 = &cfam1_i2c13;
+		i2c214 = &cfam1_i2c14;
+	};
+
+};
+
+&i2c0 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tpm: tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&pinctrl {
+	/* Hog these as no driver is probed for the entire LPC block */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpc_default>,
+		    <&pinctrl_lsirq_default>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
index a27c88d23056..8a7fb55ab489 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-vesnin.dts
@@ -11,10 +11,10 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
-	memory {
+	memory@40000000 {
 		reg = <0x40000000 0x20000000>;
 	};
 
@@ -43,6 +43,10 @@
 			gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>;
 		};
 
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+		};
+
 		id_blue {
 			gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>;
 		};
@@ -59,13 +63,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		button_checkstop {
+		event-checkstop {
 			label = "checkstop";
 			linux,code = <74>;
 			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
 		};
 
-		button_identify {
+		event-identify {
 			label = "identify";
 			linux,code = <152>;
 			gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
@@ -103,10 +107,7 @@
 
 &mac0 {
 	status = "okay";
-
 	use-ncsi;
-	no-hw-checksum;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
 };
@@ -232,3 +233,16 @@
 &wdt2 {
 	aspeed,alt-boot;
 };
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	cd-inverted;
+	disable-wp;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
index 31ea34e14c79..89907b628b65 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
@@ -10,7 +10,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -27,6 +27,12 @@
 			reg = <0x98000000 0x04000000>; /* 64M */
 		};
 
+		vga_memory: region@9f000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
 		gfx_memory: framebuffer {
 			size = <0x01000000>;
 			alignment = <0x01000000>;
@@ -45,25 +51,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		air-water {
+		event-air-water {
 			label = "air-water";
 			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(B, 5)>;
 		};
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(J, 2)>;
 		};
 
-		ps0-presence {
+		event-ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(P, 7)>;
 		};
 
-		ps1-presence {
+		event-ps1-presence {
 			label = "ps1-presence";
 			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(N, 0)>;
@@ -77,29 +83,27 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <1000>;
 
-		fan0-presence {
+		event-fan0-presence {
 			label = "fan0-presence";
 			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
 			linux,code = <4>;
 		};
 
-		fan1-presence {
+		event-fan1-presence {
 			label = "fan1-presence";
 			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
 			linux,code = <5>;
 		};
 
-		fan2-presence {
+		event-fan2-presence {
 			label = "fan2-presence";
 			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
 			linux,code = <6>;
 		};
 
-		fan3-presence {
+		event-fan3-presence {
 			label = "fan3-presence";
 			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
 			linux,code = <7>;
@@ -169,7 +173,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
@@ -193,6 +197,40 @@
 
 };
 
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","air-water","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"fsi-data","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"presence-ps1","","led-rear-fault","led-rear-power",
+		        "led-rear-id","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","presence-ps0",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","power-button","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 &fmc {
 	status = "okay";
 
@@ -200,6 +238,7 @@
 		status = "okay";
 		label = "bmc";
 		m25p,fast-read;
+		spi-max-frequency = <50000000>;
 
 		partitions {
 			#address-cells = < 1 >;
@@ -224,6 +263,7 @@
 		status = "okay";
 		label = "alt-bmc";
 		m25p,fast-read;
+		spi-max-frequency = <50000000>;
 
 		partitions {
 			#address-cells = < 1 >;
@@ -242,7 +282,6 @@
 				label = "alt-obmc-ubi";
 			};
 		};
-
 	};
 };
 
@@ -255,6 +294,7 @@
 		status = "okay";
 		label = "pnor";
 		m25p,fast-read;
+		spi-max-frequency = <100000000>;
 	};
 };
 
@@ -293,6 +333,9 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
 	use-ncsi;
 };
 
@@ -618,10 +661,6 @@
 	memory-region = <&gfx_memory>;
 };
 
-&pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-};
-
 &wdt1 {
 	aspeed,reset-type = "none";
 	aspeed,external-signal;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
index 30624378316d..af3a9d39d277 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
@@ -17,7 +17,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -58,13 +58,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		checkstop {
+		event-checkstop {
 			label = "checkstop";
 			gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(F, 7)>;
 		};
 
-		pcie-e2b-present{
+		event-pcie-e2b-present {
 			label = "pcie-e2b-present";
 			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(E, 7)>;
@@ -96,7 +96,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
@@ -130,6 +130,7 @@
 		status = "okay";
 		label = "bmc";
 		m25p,fast-read;
+		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout.dtsi"
 	};
 };
@@ -143,6 +144,7 @@
 		status = "okay";
 		label = "pnor";
 		m25p,fast-read;
+		spi-max-frequency = <100000000>;
 	};
 };
 
@@ -187,6 +189,9 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
 	use-ncsi;
 };
 
@@ -226,7 +231,7 @@
 &i2c1 {
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -277,7 +282,7 @@
 &i2c4 {
 	status = "okay";
 
-	i2c-switch@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9546";
 		reg = <0x71>;
 		#address-cells = <1>;
@@ -461,8 +466,6 @@
 };
 
 &pinctrl {
-	aspeed,external-nodes = <&gfx &lhc>;
-
 	pinctrl_gpioh_unbiased: gpioi_unbiased {
 		pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
 		bias-disable;
@@ -473,32 +476,61 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpioh_unbiased>;
 
-	line_iso_u146_en {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","led-sys-boot-status","led-attention",
+				"led-fault",
+	/*E0-E7*/	"","","","","","","","presence-pcie-e2b",
+	/*F0-F7*/	"","","","","","","","checkstop",
+	/*G0-G7*/	"fsi-clock","fsi-data","","","","","","",
+	/*H0-H7*/	"onewire0","onewire1","onewire2","onewire3","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","iso_u164_en","","fsi-trans","",
+	/*P0-P7*/	"ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
+				"","fsi-mux","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","led-hdd-fault","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	line-iso-u146-en-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "iso_u164_en";
 	};
 
-	ncsi_mux_en_n {
+	ncsi-mux-en-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
-		line-name = "ncsi_mux_en_n";
 	};
 
-	line_bmc_i2c2_sw_rst_n {
+	line-bmc-i2c2-sw-rst-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "bmc_i2c2_sw_rst_n";
 	};
 
-	line_bmc_i2c5_sw_rst_n {
+	line-bmc-i2c5-sw-rst-n-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "bmc_i2c5_sw_rst_n";
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
index 33d704541de6..a5e64ccc2b3a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-portwell-neptune.dts
@@ -14,7 +14,7 @@
 	};
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@80000000 {
@@ -24,17 +24,17 @@
 	leds {
 		compatible = "gpio-leds";
 		postcode0 {
-			label="BMC_UP";
+			label = "BMC_UP";
 			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 		postcode1 {
-			label="BMC_HB";
+			label = "BMC_HB";
 			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 		postcode2 {
-			label="FAULT";
+			label = "FAULT";
 			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 		};
 		// postcode3-7 are GPIOH3-H7
@@ -80,12 +80,18 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii1_default
 		     &pinctrl_mdio1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
 };
 
 &mac1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
 	use-ncsi;
 };
 
@@ -115,6 +121,8 @@
 	pca9555@27 {
 		compatible = "nxp,pca9555";
 		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
new file mode 100644
index 000000000000..259ef3f54c5c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "Qualcomm DC-SCM V1 BMC";
+	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	/* Bootloader sets up the MAC to insert delay */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+
+	use-ncsi;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <133000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BMC_FLASH_MUX_SEL","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","",
+	/*O0-O7*/	"JTAG_MUX_A","JTAG_MUX_B","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","SCMFPGA_SPARE_GPIO1_3V3",
+			"SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3",
+			"SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*A0-A7*/	"GPI_1_BMC_1V8","","","","","",
+			"SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8",
+	/*B0-B7*/	"SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8",
+			"SCMFPGA_SPARE_GPIO5_1V8","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","",
+			"","TPM2_PIRQ_N","TPM2_RST_N","",
+	/*E0-E7*/	"","","","","","","","";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
index a68ff0675c28..fed2791f5994 100644
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
@@ -28,7 +28,7 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=ttyS4,115200 earlycon";
 	};
 
 	memory@40000000 {
@@ -197,7 +197,7 @@
 	 *    Slot 6,
 	 *    Slot 7
 	 */
-	i2c-switch@74 {
+	i2c-mux@74 {
 		compatible = "nxp,pca9546";
 		reg = <0x74>;
 		#address-cells = <1>;
@@ -238,7 +238,7 @@
 	 *    SSD 1,
 	 *    SSD 2
 	 */
-	i2c-switch@77 {
+	i2c-mux@77 {
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -325,7 +325,7 @@
 	 *    PSU3
 	 *    PSU2
 	 */
-	i2c-switch@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
new file mode 100644
index 000000000000..86451227847b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Quanta Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Quanta S6Q BMC";
+	compatible = "quanta,s6q-bmc", "aspeed,ast2600";
+
+	aliases {
+		// bus 0
+		i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
+		i2c21 = &U12_PCA9546_CH1;
+		i2c22 = &SMB_HOST_DB800_B_SCL;
+		i2c23 = &SMB_HOST_DB800_C_SCL;
+
+		// bus 1
+		i2c24 = &SMB_M2_P0_1V8AUX_SCL;
+		i2c25 = &SMB_M2_P1_1V8AUX_SCL;
+		i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
+		i2c27 = &SMB_TEMP_3V3AUX_SCL;
+		i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
+		i2c29 = &SMB_IPMB_3V3AUX_SCL;
+		i2c31 = &SMB_FB_SCL;
+
+		// bus 1 - Fan board
+		i2c32 = &SMB_IOEXP_SCL;
+		i2c33 = &SMB_PROGRAM_SCL;
+		i2c34 = &SMB_FB_SCL_CH2;
+		i2c35 = &SMB_FAN_SENSE_SCL;
+
+		// bus 6
+		i2c36 = &U197_PCA9546_CH0;
+		i2c37 = &U197_PCA9546_CH1;
+		i2c38 = &U197_PCA9546_CH2;
+		i2c39 = &U197_PCA9546_CH3;
+
+		//bus 7
+		i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
+		i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		BMC_HEARTBEAT_N {
+			label = "BMC_HEARTBEAT_N";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		BMC_LED_STATUS_AMBER_N {
+			label = "BMC_LED_STATUS_AMBER_N";
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		FM_ID_LED_N {
+			label = "FM_ID_LED_N";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 - A7*/	"", "", "", "", "", "", "", "",
+	/*B0 - B7*/	"", "", "", "", "", "", "", "",
+	/*C0 - C7*/	"", "", "", "", "", "", "", "",
+	/*D0 - D7*/	"", "", "", "", "", "", "", "",
+	/*E0 - E7*/	"", "", "", "", "", "", "", "",
+	/*F0 - F7*/	"PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
+	/*G0 - G7*/	"", "", "", "", "", "", "", "",
+	/*H0 - H7*/	"", "", "", "", "", "", "", "",
+	/*I0 - I7*/	"", "", "", "", "", "", "", "",
+	/*J0 - J7*/	"", "", "", "", "", "", "", "",
+	/*K0 - K7*/	"", "", "", "", "", "", "", "",
+	/*L0 - L7*/	"", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
+	/*M0 - M7*/	"", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
+	/*N0 - N7*/	"", "", "", "", "", "", "", "",
+	/*O0 - O7*/	"", "", "", "", "", "", "", "",
+	/*P0 - P7*/	"SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
+	/*Q0 - Q7*/	"", "", "", "", "", "", "", "",
+	/*R0 - R7*/	"", "", "", "", "", "", "", "",
+	/*S0 - S7*/	"", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
+	/*T0 - T7*/	"", "", "", "", "", "", "", "",
+	/*U0 - U7*/	"", "", "", "", "", "", "", "",
+	/*V0 - V7*/	"", "", "", "", "", "SMI", "", "",
+	/*W0 - W7*/	"", "", "", "", "", "", "", "",
+	/*X0 - X7*/	"", "", "", "", "", "", "", "",
+	/*Y0 - Y7*/	"", "", "", "", "", "", "", "",
+	/*Z0 - Z7*/	"FM_BMC_READY_N", "", "", "", "", "", "", "",
+	/*AA0 - AA7*/	"", "", "", "", "", "", "", "",
+	/*AB0 - AB7*/	"", "", "", "", "", "", "", "",
+	/*AC0 - AC7*/	"", "", "", "", "", "", "", "";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <48000>;
+	gpio-line-names =
+	/* SGPIO input lines */
+	/*IOA0-IOA7*/	"","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
+	/*IOB0-IOB7*/	"FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
+	/*IOC0-IOC7*/	"PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
+	/*IOD0-IOD7*/	"","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
+	/*IOE0-IOE7*/	"","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
+	/*IOF0-IOF7*/	"CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
+	/*IOG0-IOG7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOH0-IOH7*/	"","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
+	/*IOI0-IOI7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOJ0-IOJ7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOK0-IOK7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOL0-IOL7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOM0-IOM7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*ION0-ION7*/	"","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
+	/*IOO0-IOO7*/	"","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
+	/*IOP0-IOP7*/	"IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rmii";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+		&pinctrl_spi2cs2_default>;
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi2:0";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA0>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	U34_PWR_ADC@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	U35_PWR_ADC@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_HOST_DB2000_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U12_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_HOST_DB800_B_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_HOST_DB800_C_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-mux@59 {
+		compatible = "nxp,pca9848";
+		reg = <0x59>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_M2_P0_1V8AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_M2_P1_1V8AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_CPU_PIROM_3V3AUX_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_TEMP_3V3AUX_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			U163_tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			U114_tmp75@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SSDSB_SCL: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			U4_tmp75@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+			U73_tmp75@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SCL: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			eeprom@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+				pagesize = <32>;
+			};
+		};
+
+		SMB_FB_SCL: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				SMB_IOEXP_SCL: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				SMB_PROGRAM_SCL: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				SMB_FB_SCL_CH2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				SMB_FAN_SENSE_SCL: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					Current_Meter_U2@45 {
+						compatible = "ti,ina219";
+						reg = <0x45>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					Current_Meter_U3@44 {
+						compatible = "ti,ina219";
+						reg = <0x44>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					TEMP_sensor_U2@4b {
+						compatible = "ti,tmp75";
+						reg = <0x4b>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* MB FRU (U173) @ 0xA2 */
+	mb_fru: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	/* FP_U1 Inlet */
+	FP_U1_tmp75@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		U197_PCA9546_CH0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U197_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			cpu0_pvccin@60 {
+				compatible = "renesas,raa229004";
+				reg = <0x60>;
+			};
+
+			cpu0_pvccinfaon@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+
+			cpu0_pvccd_hv@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+		};
+
+		U197_PCA9546_CH2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			cpu1_pvccin@72 {
+				compatible = "renesas,raa229004";
+				reg = <0x72>;
+			};
+
+			cpu1_pvccinfaon@74 {
+				compatible = "isil,isl69260";
+				reg = <0x74>;
+			};
+
+			cpu1_pvccd_hv@76 {
+				compatible = "isil,isl69260";
+				reg = <0x76>;
+			};
+		};
+
+		U197_PCA9546_CH3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		SMB_OCP_SFF_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_OCP_LFF_3V3AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+
+	/* SCM FRU (U19) @ 0xA2 */
+	scm_fru: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	scm_tmp75_u4@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts
new file mode 100644
index 000000000000..b961dff388d1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-supermicro-x11spi.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Super Micro Computer, Inc
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "X11SPI BMC";
+	compatible = "supermicro,x11spi-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@7f000000 {
+			no-map;
+			reg = <0x7f000000 0x01000000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+};
+
+&gpio {
+    status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+    status = "okay";
+
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_rmii1_default>;
+    clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+           <&syscon ASPEED_CLK_MAC1RCLK>;
+    clock-names = "MACCLK", "RCLK";
+    use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts
new file mode 100644
index 000000000000..aff27c1d4b06
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s7106.dts
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S7106 BMC";
+	compatible = "tyan,s7106-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan #0 */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* CPU fan #1 */
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4  */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - IPMB pin header
+	 * - CPU #0 memory error LED @ 0x3A
+	 * - CPU #1 memory error LED @ 0x3C
+	 */
+};
+
+&i2c1 {
+	/* Directly connected to PCH SMBUS #0 */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	/* Also connected to:
+	 * - fan header
+	 * - mini-SAS HD connector
+	 * - SSATA SGPIO
+	 * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low)
+	 *   to PCH SMBUS #3
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+	/* Also connected to:
+	 * - PCH SMBUS #1
+	 */
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #2
+	 */
+
+	/* Connected via switch to:
+	 * - CPU #0 channels ABC VDDQ @ 0x80
+	 * - CPU #0 channels DEF VDDQ @ 0x81
+	 * - CPU #1 channels ABC VDDQ @ 0x82
+	 * - CPU #1 channels DEF VDDQ @ 0x83
+	 * - CPU #0 VCCIO & VMCP @ 0x52
+	 * - CPU #1 VCCIO & VMCP @ 0x53
+	 * - CPU #0 VCCIN @ 0xC0
+	 * - CPU #0 VSA @ 0xC2
+	 * - CPU #1 VCCIN @ 0xC4
+	 * - CPU #1 VSA @ 0xC6
+	 * - J110
+	 */
+};
+
+&i2c5 {
+	status = "okay";
+
+	/* Connected via switch (PCH_BMC_SMB_SW_P) to:
+	 * - mainboard FRU @ 0xAE
+	 * - XDP connector
+	 * - ME debug header
+	 * - clock buffer @ 0xD8
+	 * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
+	 * - PCH SMBUS
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	/* Connected via switch (BMC_PE_SMB_EN_1_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: PCIE slot 1, SMB #1
+	 * - 0,1: PCIE slot 1, SMB #2
+	 * - 1,0: PCIE slot 2, SMB #1
+	 * - 1,1: PCIE slot 2, SMB #2
+	 */
+
+	/* Connected via switch (BMC_PE_SMB_EN_2_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: OCP0 (A) SMB
+	 * - 0,1: OCP0 (C) SMB
+	 * - 1,0: OCP1 (A) SMB
+	 * - 1,1: NC
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_IDLED_ON_N */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0*/		"",
+	/*C1*/		"",
+	/*C2*/		"",
+	/*C3*/		"",
+	/*C4*/		"id-button", /* in/out: BMC_IDBTN_IN_OUT_N */
+	/*C5*/		"post-complete", /* in: FM_BIOS_POST_CMPLT_N */
+	/*C6*/		"",
+	/*C7*/		"",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: SYS_PWROK_BUF */
+	/*D3*/		"platform-reset", /* in: SYS_PLTRST_N */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_PWBTN_IN_N */
+	/*E1*/		"power-chassis-control", /* out: BMC_PWRBTN_OUT_N */
+	/*E2*/		"reset-button", /* in: BMC_RSTBTN_IN_N */
+	/*E3*/		"reset-control", /* out: BMC_RSTBTN_OUT_N */
+	/*E4*/		"nmi-button", /* in: BMC_NMIBTN_IN_N */
+	/*E5*/		"nmi-control", /* out: BMC_NMIBTN_OUT_N */
+	/*E6*/		"",
+	/*E7*/		"led-heartbeat", /* out: BMC_HEARTBRAT_LED_N */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_CLR_CMOS_N */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: AST_HW_FAULT_N */
+	/*F5*/		"",
+	/*F6*/		"",
+	/*F7*/		"",
+	/*G0*/		"BMC_PE_SMB_EN_1_N", /* out */
+	/*G1*/		"BMC_PE_SMB_EN_2_N", /* out */
+	/*G2*/		"",
+	/*G3*/		"",
+	/*G4*/		"",
+	/*G5*/		"",
+	/*G6*/		"",
+	/*G7*/		"",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"BMC_PE_SMB_SW_BIT0", /* out */
+	/*Q5*/		"BMC_PE_SMB_SW_BIT1", /* out */
+	/*Q6*/		"",
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"BMC_SMB3_PCH_IE_SML3_EN", /* out */
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"",
+	/*AB0-AB7*/	"","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts
new file mode 100644
index 000000000000..f6c4549c0ac4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-tyan-s8036.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S8036 BMC";
+	compatible = "tyan,s8036-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4 */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	/* Directly connected to Sideband-Temperature Sensor Interface (APML) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Directly connected to IPMB HDR. */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+	/* Also connected to:
+	 * - BCM5720
+	 * - FPGA
+	 * - FAN HDR
+	 * - FPIO HDR
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+			status = "okay";
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			status = "okay";
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - PCA9544
+	 * - CLK BUFF
+	 * - OCP FRU
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+	/* Connected to:
+	 * - PCA9548 @0xE0
+	 * - PCA9548 @0xE2
+	 * - PCA9544 @0xE4
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_CHASSIS_ID_LED_L */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: PWR_GOOD_LED -- Check if this is Z3?*/
+	/*D3*/		"platform-reset", /* in: RESET_LED_L */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_SYS_MON_PWR_BTN_L */
+	/*E1*/		"power-chassis-control", /* out: BMC_ASSERT_PWR_BTN */
+	/*E2*/		"reset-button", /* in: BMC_SYS_MOS_RST_BTN_L*/
+	/*E3*/		"reset-control", /* out: BMC_ASSERT_RST_BTN */
+	/*E4*/		"nmi-button", /* in: BMC_SYS_MON_NMI_BTN_L */
+	/*E5*/		"nmi-control", /* out: BMC_ASSERT_NMI_BTN */
+	/*E6*/		"TSI_RESERT",
+	/*E7*/		"led-heartbeat", /* out: BMC_GPIOE7 */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_ASSERT_CLR_CMOS_L */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: BMC_HWM_FAULT_LED_L */
+	/*F5*/		"BMC_SYS_FAULT_LED_L",
+	/*F6*/		"BMC_ASSERT_BIOS_WP_L",
+	/*F7*/		"",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"",
+	/*Q5*/		"",
+	/*Q6*/		"id-button", /* in: BMC_CHASSIS_ID_BTN_L */
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z2*/	"","","",
+	/*Z3*/		"post-complete", /* BMC_SYS_MON_PWROK */
+	/*Z4-Z7*/	"","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"",
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"BMC_ASSERT_BMC_READY",
+	/*AB0*/		"BMC_SPD_SEL",
+	/*AB1-AB7*/	"","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
new file mode 100644
index 000000000000..7ab29129d1e4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ufispace-ncplite.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2022 Ufispace Co., Ltd.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ufispace NCPLite BMC";
+	compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		fan-status-int-l {
+			label = "fan-status-int-l";
+			gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(M, 2)>;
+		};
+
+		allpwr-good {
+			label = "allpwr-good";
+			gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(V, 4)>;
+		};
+
+		psu0-alert-n {
+			label = "psu0-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 1)>;
+		};
+
+		psu1-alert-n {
+			label = "psu1-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 2)>;
+		};
+
+		int-thermal-alert {
+			label = "int-thermal-alert";
+			gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 2)>;
+		};
+
+		cpu-caterr-l {
+			label = "cpu-caterr-l";
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 3)>;
+		};
+
+		cpu-thermtrip-l {
+			label = "cpu-thermtrip-l";
+			gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 5)>;
+		};
+
+		psu0-presence-l {
+			label = "psu0-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		psu1-presence-l {
+			label = "psu1-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		psu0-power-ok {
+			label = "psu0-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 4)>;
+		};
+
+		psu1-power-ok {
+			label = "psu1-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+	};
+};
+
+&mac2 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_reset {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&udc {
+	status = "okay";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	lm75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	lm86@4c {
+		compatible = "national,lm86";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	lm75@4f {
+		cpmpatible = "national,lm75";
+		reg = <0x4f>;
+	};
+
+	fan_ioexp: pca9535@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"","","presence-fan0","",
+		"","","presence-fan1","",
+		"","","presence-fan2","",
+		"","","presence-fan3","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"CPU_PWRGD","","","power-button","host0-ready","","presence-ps0","presence-ps1",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","reset-button","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"power-chassis-control0","power-chassis-control1","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","power-chassis-good","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
new file mode 100644
index 000000000000..44b9853f6e63
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN N110 BMC";
+	compatible = "yadro,vegman-n110-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","PCIE_NIC_ALERT","","","SKT0_FAULT_LED","","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "", "", "", "", "PE_PCH_SCR_CLKREQ", "",
+		/*IO1.0-1.7*/	"", "PE_PCH_MEZ_PRSNT", "PE_PCH_MEZ_PRSNT_", "NIC_4_PE_PRSNT", "NIC_3_PE_PRSNT", "NIC_2_PE_PRSNT", "NIC_1_PE_PRSNT", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "", "", "",
+		/*IO3.0-3.7*/	"", "", "", "", "", "", "", "",
+		/*IO4.0-4.7*/	"", "", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	i2c-mux@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x06>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
new file mode 100644
index 000000000000..98f3e0437704
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Rx20 BMC";
+	compatible = "yadro,vegman-rx20-bmc", "aspeed,ast2500";
+
+	leds {
+		compatible = "gpio-leds";
+
+		temp_alarm {
+			label = "temp:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		temp_ok {
+			label = "temp:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_fault {
+			label = "psu:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_ok {
+			label = "psu:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CASE_OPEN_DNP","CASE_OPEN_FAULT_RST_DNP","BEZEL_ON_PWR_P3V3","PWM_PWRGD_EXP_EN","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","LED_TEMP_STATUS_R","LED_TEMP_STATUS_G","LED_PWR_STATUS_R","LED_PWR_STATUS_G",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED_DNP","SKT1_FAULT_LED_DNP","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","SPI_BMC_BOOT_HD","IRQ_NMI_EVENT","SPI_BMC_BOOT_WP","SPI_BMC_BOOT_WP1","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"SEL_FLASH_SOFT","STATUS_SEL_BMC","","","BMC_WDT_P","ID_BUTTON","PS_PWROK","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","SPI_BIOS_ACTIVE_FLASH_SEL","STATUS_SEL_BIOS",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_BMC_BOOT_CS1","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","RSR_A_SMBEXP_RST_INT","RSR_B_SMBEXP_RST_INT","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","BMC_WDT_RST1","BMC_WDT_RST2","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"ETH3_CLK_REQ", "ETH2_CLK_REQ", "RSR_A_PCIE_X16_2_PRSNT", "RSR_B_PCIE_X16_2_PRSNT", "", "RSR_B_PCIE_X8_3_PRSNT", "RSR_B_PCIE_X8_4_PRSNT", "RSR_B_PCIE_X16_PRSNT_N",
+		/*IO1.0-1.7*/	"RSR_B_PCIE_X8_2_PRSNT", "RSR_B_PCIE_X8_1_PRSNT", "NIC_1_PE_BUF_PRSNT", "RSR_A_PCIE_X16_PRSNT", "RSR_A_PCIE_X8_3_PRSNT", "RSR_A_PCIE_X8_2_PRSNT", "RSR_A_PCIE_X8_1_PRSNT_N", "";
+	};
+	gpio@23 {
+		compatible = "nxp,pcal9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "", "", "",
+		/*IO1.0-1.7*/	"", "", "", "", "", "", "", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PCH_PWR_RESET_N", "FM_BOARD_SKU_ID0", "FM_BOARD_SKU_ID1", "FM_BOARD_SKU_ID2", "FM_BOARD_SKU_ID3", "FM_BOARD_SKU_ID4", "FM_BOARD_REV_ID0", "FM_BOARD_REV_ID1";
+	};
+	gpio@39 {
+		compatible = "nxp,pca9554";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FAN_FAULT_0", "FAN_FAULT_1", "FAN_FAULT_2", "FAN_FAULT_3", "FAN_FAULT_4", "FAN_FAULT_5", "FAN_FAULT_6", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+		};
+	};
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+				size = <8192>;
+				address-width = <16>;
+			};
+		};
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x07>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0C>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0D>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
new file mode 100644
index 000000000000..933ca831d375
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Sx20 BMC";
+	compatible = "yadro,vegman-sx20-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED","SKT1_FAULT_LED","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","BMC_GPU_RISER_ID1","BMC_GPU_RISER_ID0","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","P12V_HDDS_A_EN","P12V_HDDS_B_EN","P5V_HDDS_A_EN","PWRGD_P5V_HDDS_A","P5V_HDDS_B_EN","PWRGD_P5V_HDDS_B","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "CPU1_PE3_0_SLOT_PRSNT", "", "CPU1_PE1_GPU_PRSNT", "CPU1_PE3_1_SLOT_PRSNT", "PE_PCH_MEZ_PRSNT", "CPU0_PE3_1_SLOT_PRSNT",
+		/*IO1.0-1.7*/	"CPU0_PE1_GPU_PRSNT", "CPU0_PE2_NVME2_PRSNT", "CPU1_PE2_NVME3_PRSNT", "CPU1_PE2_SLOT_PRSNT", "CPU1_PE2_NVME4_PRSNT", "", "CPU0_PE2_NVME1_PRSNT", "CPU0_PE3_0_RAID_PRSNT";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PWRGD_P5V_HDDS_A_R", "PWRGD_P5V_HDDS_B_R", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	i2c-mux@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	i2c-mux@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
new file mode 100644
index 000000000000..8c953e3a1d41
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		ramoops@9eff0000 {
+			compatible = "ramoops";
+			reg = <0x9eff0000 0x10000>;
+			record-size = <0x2000>;
+			console-size = <0x2000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			label = "platform:blue:indicator";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		status_amber {
+			label = "platform:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		status_green {
+			label = "platform:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_fault {
+			label = "platform:red:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_ok {
+			label = "platform:green:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&timer 5 1000000 0>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			/* KSZ9131 */
+			compatible = "ethernet-phy-id0022.1640";
+			reg = <1>;
+
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	disable-wp;
+};
+
+&timer {
+	fttmr010,pwm-outputs = <5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_timer5_default>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&i2c0 {
+	/* SMB_IPMB_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c1 {
+	/* SMB_CHASSENSOR_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c3 {
+	/* SMB_HOST_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c4 {
+	/* BMC_PMBUS2_STBY */
+	status = "okay";
+};
+
+&i2c5 {
+	/* SMB_SMLINK0_STBY_LVC3 */
+	bus-frequency = <1000000>;
+	multi-master;
+	status = "okay";
+};
+
+&i2c6 {
+	/* SMB_TEMPSENSOR_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c7 {
+	/* SMB_SM_PMB1_SML1_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c9 {
+	/* SMB_BMC_ETH3_LVC3 */
+	status = "okay";
+};
+
+&i2c10 {
+	/* SMB_BMC_ETH2_LVC3 */
+	status = "okay";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&i2c12 {
+	/* SMB_BMC_FAULT_EXP_LVC3 */
+	status = "okay";
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index dffb595d30e4..c3d4d916c69b 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -54,8 +54,7 @@
 		ranges;
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0x94
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-fmc";
@@ -65,33 +64,42 @@
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@3 {
 				reg = < 3 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@4 {
 				reg = < 4 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 		};
 
 		spi: spi@1e630000 {
-			reg = < 0x1e630000 0x18
-				0x30000000 0x10000000 >;
+			reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2400-spi";
@@ -100,6 +108,8 @@
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -112,8 +122,8 @@
 			reg = <0x1e6c0080 0x80>;
 		};
 
-		cvic: copro-interrupt-controller@1e6c2000 {
-			compatible = "aspeed,ast2400-cvic", "aspeed-cvic";
+		cvic: interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2400-cvic", "aspeed,cvic";
 			valid-sources = <0x7fffffff>;
 			reg = <0x1e6c2000 0x80>;
 		};
@@ -162,6 +172,8 @@
 			reg = <0x1e6a0000 0x300>;
 			interrupts = <5>;
 			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2d_default>;
 			status = "disabled";
@@ -177,18 +189,26 @@
 				compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
-				#size-cells = <0>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 
-				pinctrl: pinctrl {
-					compatible = "aspeed,g4-pinctrl";
-				};
-
-				p2a: p2a-control {
+				p2a: p2a-control@2c {
+					reg = <0x2c 0x4>;
 					compatible = "aspeed,ast2400-p2a-ctrl";
 					status = "disabled";
 				};
+
+				silicon-id@7c {
+					compatible = "aspeed,ast2400-silicon-id", "aspeed,silicon-id";
+					reg = <0x7c 0x4>;
+				};
+
+				pinctrl: pinctrl@80 {
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					compatible = "aspeed,ast2400-pinctrl";
+				};
 			};
 
 			rng: hwrng@1e6e2078 {
@@ -210,6 +230,19 @@
 			sram: sram@1e720000 {
 				compatible = "mmio-sram";
 				reg = <0x1e720000 0x8000>;	// 32K
+				ranges;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2400-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
 			};
 
 			sdmmc: sd-controller@1e740000 {
@@ -321,61 +354,65 @@
 			};
 
 			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2400-lpc", "simple-mfd";
+				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0x0 0x1e789000 0x1000>;
 
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2400-lpc-bmc";
-					reg = <0x0 0x80>;
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2400-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2400-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2400-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2400-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
 				};
 
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x80 0x1e0>;
-
-					lpc_ctrl: lpc-ctrl@0 {
-						compatible = "aspeed,ast2400-lpc-ctrl";
-						reg = <0x0 0x80>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lpc_snoop: lpc-snoop@0 {
-						compatible = "aspeed,ast2400-lpc-snoop";
-						reg = <0x0 0x80>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2400-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-
-					lpc_reset: reset-controller@18 {
-						compatible = "aspeed,ast2400-lpc-reset";
-						reg = <0x18 0x4>;
-						#reset-cells = <1>;
-					};
-
-					ibt: ibt@c0  {
-						compatible = "aspeed,ast2400-ibt-bmc";
-						reg = <0xc0 0x18>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2400-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2400-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
 				};
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2400-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -428,10 +465,9 @@
 		interrupt-controller;
 	};
 
-	i2c0: i2c-bus@40 {
+	i2c0: i2c@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -444,10 +480,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c1: i2c-bus@80 {
+	i2c1: i2c@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -460,10 +495,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c2: i2c-bus@c0 {
+	i2c2: i2c@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -477,10 +511,9 @@
 		status = "disabled";
 	};
 
-	i2c3: i2c-bus@100 {
+	i2c3: i2c@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -494,10 +527,9 @@
 		status = "disabled";
 	};
 
-	i2c4: i2c-bus@140 {
+	i2c4: i2c@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -511,10 +543,9 @@
 		status = "disabled";
 	};
 
-	i2c5: i2c-bus@180 {
+	i2c5: i2c@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -528,10 +559,9 @@
 		status = "disabled";
 	};
 
-	i2c6: i2c-bus@1c0 {
+	i2c6: i2c@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -545,10 +575,9 @@
 		status = "disabled";
 	};
 
-	i2c7: i2c-bus@300 {
+	i2c7: i2c@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -562,10 +591,9 @@
 		status = "disabled";
 	};
 
-	i2c8: i2c-bus@340 {
+	i2c8: i2c@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -579,10 +607,9 @@
 		status = "disabled";
 	};
 
-	i2c9: i2c-bus@380 {
+	i2c9: i2c@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -596,10 +623,9 @@
 		status = "disabled";
 	};
 
-	i2c10: i2c-bus@3c0 {
+	i2c10: i2c@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -613,10 +639,9 @@
 		status = "disabled";
 	};
 
-	i2c11: i2c-bus@400 {
+	i2c11: i2c@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -630,10 +655,9 @@
 		status = "disabled";
 	};
 
-	i2c12: i2c-bus@440 {
+	i2c12: i2c@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
@@ -647,10 +671,9 @@
 		status = "disabled";
 	};
 
-	i2c13: i2c-bus@480 {
+	i2c13: i2c@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index e8feb8b66a2f..39500bdb4747 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 #include <dt-bindings/clock/aspeed-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
 
 / {
 	model = "Aspeed BMC";
@@ -47,13 +48,6 @@
 		reg = <0x80000000 0>;
 	};
 
-	edac: sdram@1e6e0000 {
-		compatible = "aspeed,ast2500-sdram-edac";
-		reg = <0x1e6e0000 0x174>;
-		interrupts = <0>;
-		status = "disabled";
-	};
-
 	ahb {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -61,8 +55,7 @@
 		ranges;
 
 		fmc: spi@1e620000 {
-			reg = < 0x1e620000 0xc4
-				0x20000000 0x10000000 >;
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-fmc";
@@ -72,23 +65,28 @@
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi1: spi@1e630000 {
-			reg = < 0x1e630000 0xc4
-				0x30000000 0x08000000 >;
+			reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
@@ -97,18 +95,21 @@
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
 
 		spi2: spi@1e631000 {
-			reg = < 0x1e631000 0xc4
-				0x38000000 0x08000000 >;
+			reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "aspeed,ast2500-spi";
@@ -117,11 +118,15 @@
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -134,8 +139,8 @@
 			reg = <0x1e6c0080 0x80>;
 		};
 
-		cvic: copro-interrupt-controller@1e6c2000 {
-			compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
+		cvic: interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2500-cvic", "aspeed,cvic";
 			valid-sources = <0xffffffff>;
 			copro-sw-interrupts = <1>;
 			reg = <0x1e6c2000 0x80>;
@@ -195,6 +200,8 @@
 			reg = <0x1e6a0000 0x300>;
 			interrupts = <5>;
 			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb2ad_default>;
 			status = "disabled";
@@ -206,24 +213,46 @@
 			#size-cells = <1>;
 			ranges;
 
+			edac: memory-controller@1e6e0000 {
+				compatible = "aspeed,ast2500-sdram-edac";
+				reg = <0x1e6e0000 0x174>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
 			syscon: syscon@1e6e2000 {
 				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
 				reg = <0x1e6e2000 0x1a8>;
 				#address-cells = <1>;
-				#size-cells = <0>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 
-				pinctrl: pinctrl {
-					compatible = "aspeed,g5-pinctrl";
-					aspeed,external-nodes = <&gfx &lhc>;
-
+				scu_ic: interrupt-controller@18 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2500-scu-ic";
+					reg = <0x18 0x4>;
+					interrupts = <21>;
+					interrupt-controller;
 				};
 
-				p2a: p2a-control {
+				p2a: p2a-control@2c {
 					compatible = "aspeed,ast2500-p2a-ctrl";
+					reg = <0x2c 0x4>;
 					status = "disabled";
 				};
+
+				silicon-id@7c {
+					compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+					reg = <0x7c 0x4 0x150 0x8>;
+				};
+
+				pinctrl: pinctrl@80 {
+					compatible = "aspeed,ast2500-pinctrl";
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					aspeed,external-nodes = <&gfx>, <&lhc>;
+				};
 			};
 
 			rng: hwrng@1e6e2078 {
@@ -233,12 +262,20 @@
 				quality = <100>;
 			};
 
+			hace: crypto@1e6e3000 {
+				compatible = "aspeed,ast2500-hace";
+				reg = <0x1e6e3000 0x100>;
+				interrupts = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
 			gfx: display@1e6e6000 {
 				compatible = "aspeed,ast2500-gfx", "syscon";
 				reg = <0x1e6e6000 0x1000>;
-				reg-io-width = <4>;
 				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
 				resets = <&syscon ASPEED_RESET_CRT1>;
+				syscon = <&syscon>;
 				status = "disabled";
 				interrupts = <0x19>;
 			};
@@ -265,6 +302,9 @@
 			sram: sram@1e720000 {
 				compatible = "mmio-sram";
 				reg = <0x1e720000 0x9000>;	// 36K
+				ranges;
+				#address-cells = <1>;
+				#size-cells = <1>;
 			};
 
 			sdmmc: sd-controller@1e740000 {
@@ -299,7 +339,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				compatible = "aspeed,ast2500-gpio";
-				reg = <0x1e780000 0x1000>;
+				reg = <0x1e780000 0x200>;
 				interrupts = <20>;
 				gpio-ranges = <&pinctrl 0 0 232>;
 				clocks = <&syscon ASPEED_CLK_APB>;
@@ -307,6 +347,21 @@
 				#interrupt-cells = <2>;
 			};
 
+			sgpio: sgpio@1e780200 {
+				#gpio-cells = <2>;
+				compatible = "aspeed,ast2500-sgpio";
+				gpio-controller;
+				interrupts = <40>;
+				reg = <0x1e780200 0x0100>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm_default>;
+				status = "disabled";
+			};
+
 			rtc: rtc@1e781000 {
 				compatible = "aspeed,ast2500-rtc";
 				reg = <0x1e781000 0x18>;
@@ -383,92 +438,98 @@
 			};
 
 			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2500-lpc", "simple-mfd";
+				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0x0 0x1e789000 0x1000>;
 
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
-					reg = <0x0 0x80>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x0 0x80>;
-
-					kcs1: kcs1@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
-						interrupts = <8>;
-						kcs_chan = <1>;
-						status = "disabled";
-					};
-					kcs2: kcs2@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
-						interrupts = <8>;
-						kcs_chan = <2>;
-						status = "disabled";
-					};
-					kcs3: kcs3@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
-						interrupts = <8>;
-						kcs_chan = <3>;
-						status = "disabled";
-					};
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2500-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
 				};
 
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x80 0x1e0>;
-
-					kcs4: kcs4@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
-						interrupts = <8>;
-						kcs_chan = <4>;
-						status = "disabled";
-					};
-
-					lpc_ctrl: lpc-ctrl@0 {
-						compatible = "aspeed,ast2500-lpc-ctrl";
-						reg = <0x0 0x80>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lpc_snoop: lpc-snoop@0 {
-						compatible = "aspeed,ast2500-lpc-snoop";
-						reg = <0x0 0x80>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2500-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
-
-					lpc_reset: reset-controller@18 {
-						compatible = "aspeed,ast2500-lpc-reset";
-						reg = <0x18 0x4>;
-						#reset-cells = <1>;
-					};
-
-					ibt: ibt@c0 {
-						compatible = "aspeed,ast2500-ibt-bmc";
-						reg = <0xc0 0x18>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2500-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2500-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2500-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2500-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2500-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
 				};
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2500-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
@@ -521,10 +582,9 @@
 		interrupt-controller;
 	};
 
-	i2c0: i2c-bus@40 {
+	i2c0: i2c@40 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -537,10 +597,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c1: i2c-bus@80 {
+	i2c1: i2c@80 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x80 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -553,10 +612,9 @@
 		/* Does not need pinctrl properties */
 	};
 
-	i2c2: i2c-bus@c0 {
+	i2c2: i2c@c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0xc0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -570,10 +628,9 @@
 		status = "disabled";
 	};
 
-	i2c3: i2c-bus@100 {
+	i2c3: i2c@100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x100 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -587,10 +644,9 @@
 		status = "disabled";
 	};
 
-	i2c4: i2c-bus@140 {
+	i2c4: i2c@140 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x140 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -604,10 +660,9 @@
 		status = "disabled";
 	};
 
-	i2c5: i2c-bus@180 {
+	i2c5: i2c@180 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x180 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -621,10 +676,9 @@
 		status = "disabled";
 	};
 
-	i2c6: i2c-bus@1c0 {
+	i2c6: i2c@1c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x1c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -638,10 +692,9 @@
 		status = "disabled";
 	};
 
-	i2c7: i2c-bus@300 {
+	i2c7: i2c@300 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x300 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -655,10 +708,9 @@
 		status = "disabled";
 	};
 
-	i2c8: i2c-bus@340 {
+	i2c8: i2c@340 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x340 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -672,10 +724,9 @@
 		status = "disabled";
 	};
 
-	i2c9: i2c-bus@380 {
+	i2c9: i2c@380 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x380 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -689,10 +740,9 @@
 		status = "disabled";
 	};
 
-	i2c10: i2c-bus@3c0 {
+	i2c10: i2c@3c0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x3c0 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -706,10 +756,9 @@
 		status = "disabled";
 	};
 
-	i2c11: i2c-bus@400 {
+	i2c11: i2c@400 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x400 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -723,10 +772,9 @@
 		status = "disabled";
 	};
 
-	i2c12: i2c-bus@440 {
+	i2c12: i2c@440 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x440 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
@@ -740,10 +788,9 @@
 		status = "disabled";
 	};
 
-	i2c13: i2c-bus@480 {
+	i2c13: i2c@480 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#interrupt-cells = <1>;
 
 		reg = <0x480 0x40>;
 		compatible = "aspeed,ast2500-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
index 5b8bf58e89cb..e87c4b58994a 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
@@ -117,9 +117,9 @@
 		groups = "FWSPID";
 	};
 
-	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
-		groups = "FWQSPID";
+	pinctrl_fwqspi_default: fwqspi_default {
+		function = "FWQSPI";
+		groups = "FWQSPI";
 	};
 
 	pinctrl_fwspiwp_default: fwspiwp_default {
@@ -208,12 +208,12 @@
 	};
 
 	pinctrl_hvi3c3_default: hvi3c3_default {
-		function = "HVI3C3";
+		function = "I3C3";
 		groups = "HVI3C3";
 	};
 
 	pinctrl_hvi3c4_default: hvi3c4_default {
-		function = "HVI3C4";
+		function = "I3C4";
 		groups = "HVI3C4";
 	};
 
@@ -297,6 +297,16 @@
 		groups = "I2C9";
 	};
 
+	pinctrl_i3c1_default: i3c1_default {
+		function = "I3C1";
+		groups = "I3C1";
+	};
+
+	pinctrl_i3c2_default: i3c2_default {
+		function = "I3C2";
+		groups = "I3C2";
+	};
+
 	pinctrl_i3c3_default: i3c3_default {
 		function = "I3C3";
 		groups = "I3C3";
@@ -402,6 +412,16 @@
 		groups = "MDIO4";
 	};
 
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+
+	pinctrl_ncsi4_default: ncsi4_default {
+		function = "RMII4";
+		groups = "NCSI4";
+	};
+
 	pinctrl_ncts1_default: ncts1_default {
 		function = "NCTS1";
 		groups = "NCTS1";
@@ -653,12 +673,12 @@
 	};
 
 	pinctrl_qspi1_default: qspi1_default {
-		function = "QSPI1";
+		function = "SPI1";
 		groups = "QSPI1";
 	};
 
 	pinctrl_qspi2_default: qspi2_default {
-		function = "QSPI2";
+		function = "SPI2";
 		groups = "QSPI2";
 	};
 
@@ -852,14 +872,9 @@
 		groups = "SD2";
 	};
 
-	pinctrl_sd3_default: sd3_default {
-		function = "SD3";
-		groups = "SD3";
-	};
-
 	pinctrl_emmc_default: emmc_default {
-		function = "SD3";
-		groups = "EMMC";
+		function = "EMMC";
+		groups = "EMMCG4";
 	};
 
 	pinctrl_sgpm1_default: sgpm1_default {
@@ -867,11 +882,21 @@
 		groups = "SGPM1";
 	};
 
+	pinctrl_sgpm2_default: sgpm2_default {
+		function = "SGPM2";
+		groups = "SGPM2";
+	};
+
 	pinctrl_sgps1_default: sgps1_default {
 		function = "SGPS1";
 		groups = "SGPS1";
 	};
 
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
 	pinctrl_sioonctrl_default: sioonctrl_default {
 		function = "SIOONCTRL";
 		groups = "SIOONCTRL";
@@ -1117,6 +1142,31 @@
 		groups = "UART9";
 	};
 
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USBB";
+	};
+
+	pinctrl_usb2bd_default: usb2bd_default {
+		function = "USB2BD";
+		groups = "USBB";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USBB";
+	};
+
 	pinctrl_vb_default: vb_default {
 		function = "VB";
 		groups = "VB";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
new file mode 100644
index 000000000000..f8662c8ac089
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -0,0 +1,1108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+#include <dt-bindings/clock/ast2600-clock.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2600";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart1;
+		serial6 = &vuart2;
+		mdio0 = &mdio0;
+		mdio1 = &mdio1;
+		mdio2 = &mdio2;
+		mdio3 = &mdio3;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "aspeed,ast2600-smp";
+
+		cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+		};
+
+		cpu@f01 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf01>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		clocks = <&syscon ASPEED_CLK_HPLL>;
+		arm,cpu-registers-not-fw-configured;
+		always-on;
+	};
+
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2600-sdram-edac", "syscon";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges;
+
+		gic: interrupt-controller@40461000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			reg = <0x40461000 0x1000>,
+			    <0x40462000 0x1000>,
+			    <0x40464000 0x2000>,
+			    <0x40466000 0x2000>;
+			};
+
+		ahbc: bus@1e600000 {
+			compatible = "aspeed,ast2600-ahbc", "syscon";
+			reg = <0x1e600000 0x100>;
+		};
+
+		fmc: spi@1e620000 {
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi1: spi@1e630000 {
+			reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@1e631000 {
+			reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		mdio0: mdio@1e650000 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650000 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio1_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio1: mdio@1e650008 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650008 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio2_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio2: mdio@1e650010 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650010 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio3_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio3: mdio@1e650018 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650018 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio4_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		mac2: ethernet@1e670000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e670000 0x180>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
+			status = "disabled";
+		};
+
+		mac3: ethernet@1e690000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e690000 0x180>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2600-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an
+			 * explicit pinmux override if EHCI is not enabled.
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2600-usb-vhub";
+			reg = <0x1e6a0000 0x350>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <7>;
+			aspeed,vhub-generic-endpoints = <21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
+		udc: usb@1e6a2000 {
+			compatible = "aspeed,ast2600-udc";
+			reg = <0x1e6a2000 0x300>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bd_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hace: crypto@1e6d0000 {
+				compatible = "aspeed,ast2600-hace";
+				reg = <0x1e6d0000 0x200>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1000>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				pinctrl: pinctrl {
+					compatible = "aspeed,ast2600-pinctrl";
+				};
+
+				silicon-id@14 {
+					compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
+					reg = <0x14 0x4 0x5b0 0x8>;
+				};
+
+				smp-memram@180 {
+					compatible = "aspeed,ast2600-smpmem";
+					reg = <0x180 0x40>;
+				};
+
+				scu_ic0: interrupt-controller@560 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic0";
+					reg = <0x560 0x4>;
+					interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+
+				scu_ic1: interrupt-controller@570 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic1";
+					reg = <0x570 0x4>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+			};
+
+			rng: hwrng@1e6e2524 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2524 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2600-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_GRAPHICS>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			adc0: adc@1e6e9000 {
+				compatible = "aspeed,ast2600-adc0";
+				reg = <0x1e6e9000 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc1: adc@1e6e9100 {
+				compatible = "aspeed,ast2600-adc1";
+				reg = <0x1e6e9100 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sbc: secure-boot-controller@1e6f2000 {
+				compatible = "aspeed,ast2600-sbc";
+				reg = <0x1e6f2000 0x1000>;
+			};
+
+			acry: crypto@1e6fa000 {
+				compatible = "aspeed,ast2600-acry";
+				reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
+				aspeed,ahbc = <&ahbc>;
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			gpio0: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780000 0x400>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 0 208>;
+				ngpios = <208>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sgpiom0: sgpiom@1e780500 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780500 0x100>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm1_default>;
+				status = "disabled";
+			};
+
+			sgpiom1: sgpiom@1e780600 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780600 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm2_default>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@1e780800 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780800 0x800>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 208 36>;
+				ngpios = <36>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2600-rtc";
+				reg = <0x1e781000 0x18>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			timer: timer@1e782000 {
+				compatible = "aspeed,ast2600-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts-extended = <&gic  GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				clock-names = "PCLK";
+				status = "disabled";
+                        };
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785000 0x40>;
+			};
+
+			wdt2: watchdog@1e785040 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785040 0x40>;
+				status = "disabled";
+			};
+
+			wdt3: watchdog@1e785080 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785080 0x40>;
+				status = "disabled";
+			};
+
+			wdt4: watchdog@1e7850c0 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e7850C0 0x40>;
+				status = "disabled";
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2600-peci";
+				reg = <0x1e78b000 0x100>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					kcs_chan = <1>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2600-lpc-ctrl";
+					reg = <0x80 0x80>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@80 {
+					compatible = "aspeed,ast2600-lpc-snoop";
+					reg = <0x80 0x80>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2600-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2600-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				uart_routing: uart-routing@98 {
+					compatible = "aspeed,ast2600-uart-routing";
+					reg = <0x98 0x8>;
+					status = "disabled";
+				};
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2600-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+			};
+
+			sdc: sdc@1e740000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@1e740100 {
+					compatible = "aspeed,ast2600-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@1e740200 {
+					compatible = "aspeed,ast2600-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			emmc_controller: sdc@1e750000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e750000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e750000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
+				status = "disabled";
+
+				emmc: sdhci@1e750100 {
+					compatible = "aspeed,ast2600-sdhci";
+					reg = <0x100 0x100>;
+					sdhci,auto-cmd12;
+					interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_EMMC>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_emmc_default>;
+				};
+			};
+
+			vuart1: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			vuart3: serial@1e787800 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787800 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			vuart2: serial@1e788000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e788000 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			vuart4: serial@1e788800 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e788800 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
+				status = "disabled";
+			};
+
+			uart6: serial@1e790000 {
+				compatible = "ns16550a";
+				reg = <0x1e790000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart6_default>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@1e790100 {
+				compatible = "ns16550a";
+				reg = <0x1e790100 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart7_default>;
+
+				status = "disabled";
+			};
+
+			uart8: serial@1e790200 {
+				compatible = "ns16550a";
+				reg = <0x1e790200 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart8_default>;
+
+				status = "disabled";
+			};
+
+			uart9: serial@1e790300 {
+				compatible = "ns16550a";
+				reg = <0x1e790300 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart9_default>;
+
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+
+			fsim0: fsi@1e79b000 {
+				#interrupt-cells = <1>;
+				compatible = "aspeed,ast2600-fsi-master";
+				reg = <0x1e79b000 0x94>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi1_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
+				status = "disabled";
+			};
+
+			fsim1: fsi@1e79b100 {
+				#interrupt-cells = <1>;
+				compatible = "aspeed,ast2600-fsi-master";
+				reg = <0x1e79b100 0x94>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi2_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				interrupt-controller;
+				status = "disabled";
+			};
+
+			udma: dma-controller@1e79e000 {
+				compatible = "aspeed,ast2600-udma";
+				reg = <0x1e79e000 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <28>;
+				#dma-cells = <1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "aspeed-g6-pinctrl.dtsi"
+
+&i2c {
+	i2c0: i2c@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x80 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		status = "disabled";
+	};
+
+	i2c1: i2c@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x100 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_default>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x180 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@200 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x200 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@280 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x280 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x300 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x380 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x400 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x480 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x500 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c@580 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x580 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x600 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c@680 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x680 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c@700 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x700 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+
+	i2c14: i2c@780 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x780 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c15_default>;
+		status = "disabled";
+	};
+
+	i2c15: i2c@800 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x800 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c16_default>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..4e5e786e18b7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ast2400-facebook-netbmc-common.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+
+/ {
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+#include "facebook-bmc-flash-layout.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default
+		     &pinctrl_ndts4_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..7f1ae3f4df9d
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ast2500-facebook-netbmc-common.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	aliases {
+		spi0 = &fmc;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+/*
+ * Update reset type to "system" (full chip) to fix warm reboot hang issue
+ * when reset type is set to default ("soc", gated by reset mask registers).
+ */
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	fmc_flash0: flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+	};
+
+	fmc_flash1: flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+	};
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..0ef225acddfc
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		spi1 = &spi1;
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw vmalloc=640M";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * chipselect pins are defined in platform .dts files
+		 * separately.
+		 */
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+
+#include "facebook-bmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x8000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
new file mode 100644
index 000000000000..efd92232cda2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 63 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x3f00000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (64MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@4000000 {
+		reg = <0x4000000 0x4000000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
new file mode 100644
index 000000000000..7f3652dea550
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 119 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x7700000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (8MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@7800000 {
+		reg = <0x7800000 0x800000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi
index 87bb8b576250..87bb8b576250 100644
--- a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout.dtsi
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
new file mode 100644
index 000000000000..06fac236773f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			#interrupt-cells = <1>;
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
new file mode 100644
index 000000000000..9501f66d0030
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
@@ -0,0 +1,1309 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2023 IBM Corp.
+
+#include "ibm-power10-dual.dtsi"
+
+&cfam0_i2c0 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom100: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo100: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c1 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom101: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo101: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c10 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom110: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo110: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c11 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom111: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo111: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c12 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom112: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo112: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c13 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom113: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo113: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c14 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom114: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo114: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam0_i2c15 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom115: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo115: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c2 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom202: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo202: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c3 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom203: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo203: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c10 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom210: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo210: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c11 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom211: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo211: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c14 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom214: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo214: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c15 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom215: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo215: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c16 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom216: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo216: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&cfam1_i2c17 {
+	i2cr@20 {
+		compatible = "ibm,i2cr-fsi-master";
+		reg = <0x20>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cfam@0,0 {
+			reg = <0 0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			chip-id = <0>;
+
+			scom217: scom@1000 {
+				compatible = "ibm,i2cr-scom";
+				reg = <0x1000 0x400>;
+			};
+
+			sbefifo217: sbefifo@2400 {
+				compatible = "ibm,p9-sbefifo";
+				reg = <0x2400 0x400>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;	/* OM01 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom300: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo300: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;	/* OM23 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom301: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo301: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom310: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo310: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom311: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo311: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <12>;	/* OP4A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom312: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo312: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <13>;	/* OP4B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom313: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo313: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom314: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo314: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom315: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo315: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ2: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub2: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 {
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;	/* OM45 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom402: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo402: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;	/* OM67 */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom403: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo403: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <10>;	/* OP3A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom410: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo410: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <11>;	/* OP3B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom411: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo411: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <14>;	/* OP5A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom414: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo414: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <15>;	/* OP5B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom415: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo415: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <16>;	/* OP6A */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom416: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo416: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <17>;	/* OP6B */
+
+				i2cr@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom417: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo417: sbefifo@2400 {
+							compatible = "ibm,p9-sbefifo";
+							reg = <0x2400 0x400>;
+							#address-cells = <1>;
+							#size-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ3: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub3: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ2 {
+	reg = <3>;
+};
+
+&fsi_occ3 {
+	reg = <4>;
+};
+
+/ {
+	aliases {
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+
+		sbefifo100 = &sbefifo100;
+		sbefifo101 = &sbefifo101;
+		sbefifo110 = &sbefifo110;
+		sbefifo111 = &sbefifo111;
+		sbefifo112 = &sbefifo112;
+		sbefifo113 = &sbefifo113;
+		sbefifo114 = &sbefifo114;
+		sbefifo115 = &sbefifo115;
+		sbefifo202 = &sbefifo202;
+		sbefifo203 = &sbefifo203;
+		sbefifo210 = &sbefifo210;
+		sbefifo211 = &sbefifo211;
+		sbefifo214 = &sbefifo214;
+		sbefifo215 = &sbefifo215;
+		sbefifo216 = &sbefifo216;
+		sbefifo217 = &sbefifo217;
+		sbefifo300 = &sbefifo300;
+		sbefifo301 = &sbefifo301;
+		sbefifo310 = &sbefifo310;
+		sbefifo311 = &sbefifo311;
+		sbefifo312 = &sbefifo312;
+		sbefifo313 = &sbefifo313;
+		sbefifo314 = &sbefifo314;
+		sbefifo315 = &sbefifo315;
+		sbefifo402 = &sbefifo402;
+		sbefifo403 = &sbefifo403;
+		sbefifo410 = &sbefifo410;
+		sbefifo411 = &sbefifo411;
+		sbefifo414 = &sbefifo414;
+		sbefifo415 = &sbefifo415;
+		sbefifo416 = &sbefifo416;
+		sbefifo417 = &sbefifo417;
+
+		scom100 = &scom100;
+		scom101 = &scom101;
+		scom110 = &scom110;
+		scom111 = &scom111;
+		scom112 = &scom112;
+		scom113 = &scom113;
+		scom114 = &scom114;
+		scom115 = &scom115;
+		scom202 = &scom202;
+		scom203 = &scom203;
+		scom210 = &scom210;
+		scom211 = &scom211;
+		scom214 = &scom214;
+		scom215 = &scom215;
+		scom216 = &scom216;
+		scom217 = &scom217;
+		scom300 = &scom300;
+		scom301 = &scom301;
+		scom310 = &scom310;
+		scom311 = &scom311;
+		scom312 = &scom312;
+		scom313 = &scom313;
+		scom314 = &scom314;
+		scom315 = &scom315;
+		scom402 = &scom402;
+		scom403 = &scom403;
+		scom410 = &scom410;
+		scom411 = &scom411;
+		scom414 = &scom414;
+		scom415 = &scom415;
+		scom416 = &scom416;
+		scom417 = &scom417;
+
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
new file mode 100644
index 000000000000..68c941a194b6
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi
@@ -0,0 +1,1539 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 IBM Corp.
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+
+		sbefifo100 = &sbefifo100;
+		sbefifo101 = &sbefifo101;
+		sbefifo110 = &sbefifo110;
+		sbefifo111 = &sbefifo111;
+		sbefifo112 = &sbefifo112;
+		sbefifo113 = &sbefifo113;
+		sbefifo114 = &sbefifo114;
+		sbefifo115 = &sbefifo115;
+		sbefifo202 = &sbefifo202;
+		sbefifo203 = &sbefifo203;
+		sbefifo210 = &sbefifo210;
+		sbefifo211 = &sbefifo211;
+		sbefifo214 = &sbefifo214;
+		sbefifo215 = &sbefifo215;
+		sbefifo216 = &sbefifo216;
+		sbefifo217 = &sbefifo217;
+		sbefifo300 = &sbefifo300;
+		sbefifo301 = &sbefifo301;
+		sbefifo310 = &sbefifo310;
+		sbefifo311 = &sbefifo311;
+		sbefifo312 = &sbefifo312;
+		sbefifo313 = &sbefifo313;
+		sbefifo314 = &sbefifo314;
+		sbefifo315 = &sbefifo315;
+		sbefifo402 = &sbefifo402;
+		sbefifo403 = &sbefifo403;
+		sbefifo410 = &sbefifo410;
+		sbefifo411 = &sbefifo411;
+		sbefifo414 = &sbefifo414;
+		sbefifo415 = &sbefifo415;
+		sbefifo416 = &sbefifo416;
+		sbefifo417 = &sbefifo417;
+
+		scom100 = &scom100;
+		scom101 = &scom101;
+		scom110 = &scom110;
+		scom111 = &scom111;
+		scom112 = &scom112;
+		scom113 = &scom113;
+		scom114 = &scom114;
+		scom115 = &scom115;
+		scom202 = &scom202;
+		scom203 = &scom203;
+		scom210 = &scom210;
+		scom211 = &scom211;
+		scom214 = &scom214;
+		scom215 = &scom215;
+		scom216 = &scom216;
+		scom217 = &scom217;
+		scom300 = &scom300;
+		scom301 = &scom301;
+		scom310 = &scom310;
+		scom311 = &scom311;
+		scom312 = &scom312;
+		scom313 = &scom313;
+		scom314 = &scom314;
+		scom315 = &scom315;
+		scom402 = &scom402;
+		scom403 = &scom403;
+		scom410 = &scom410;
+		scom411 = &scom411;
+		scom414 = &scom414;
+		scom415 = &scom415;
+		scom416 = &scom416;
+		scom417 = &scom417;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+	};
+};
+
+&fsim0 {
+	#address-cells = <2>;
+	#size-cells = <0>;
+	status = "okay";
+	bus-frequency = <100000000>;
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom100: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo100: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom101: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo101: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom110: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo110: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom111: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo111: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom112: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo112: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom113: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo113: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom114: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo114: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom115: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo115: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom202: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo202: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom203: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo203: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom210: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo210: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom211: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo211: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom214: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo214: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom215: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo215: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom216: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo216: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom217: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo217: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom300: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo300: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom301: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo301: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom310: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo310: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom311: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo311: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom312: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo312: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom313: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo313: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom314: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo314: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom315: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo315: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 {
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,p9-scom";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,i2c-fsi";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom402: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo402: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom403: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo403: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom410: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo410: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom411: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo411: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom414: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo414: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom415: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo415: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom416: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo416: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fsi@20 {
+					compatible = "ibm,i2cr-fsi-master";
+					reg = <0x20>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+
+					cfam@0,0 {
+						reg = <0 0>;
+						#address-cells = <1>;
+						#size-cells = <1>;
+						chip-id = <0>;
+
+						scom417: scom@1000 {
+							compatible = "ibm,i2cr-scom";
+							reg = <0x1000 0x400>;
+						};
+
+						sbefifo417: sbefifo@2400 {
+							compatible = "ibm,odyssey-sbefifo";
+							reg = <0x2400 0x400>;
+						};
+					};
+				};
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					compatible = "atmel,at25";
+					reg = <0>;
+					address-width = <24>;
+					pagesize = <256>;
+					size = <0x80000>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+
+			occ {
+				compatible = "ibm,p10-occ";
+
+				hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi@3400 {
+			compatible = "ibm,p9-fsi-controller";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi
index 2abc42eda7b0..a0fa65b44b0f 100644
--- a/arch/arm/boot/dts/ibm-power9-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power9-dual.dtsi
@@ -86,7 +86,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			fsi_occ0: occ {
+			fsi_occ0: occ@1 {
 				compatible = "ibm,p9-occ";
 			};
 		};
@@ -187,7 +187,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			fsi_occ1: occ {
+			fsi_occ1: occ@2 {
 				compatible = "ibm,p9-occ";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi
new file mode 100644
index 000000000000..05101a38c5bd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-128.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x5600000>; // 86MB
+		label = "rofs";
+	};
+
+	rwfs@6000000 {
+		reg = <0x6000000 0x2000000>; // 32MB
+		label = "rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi
new file mode 100644
index 000000000000..650525867561
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64-alt.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Bytedance.
+ */
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "alt-u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "alt-u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "alt-kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x2000000>; // 32MB
+		label = "alt-rofs";
+	};
+
+	rwfs@6000000 {
+		reg = <0x2a00000 0x1600000>; // 22MB
+		label = "alt-rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi
new file mode 100644
index 000000000000..7af41361c480
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout-64.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Bytedance.
+ */
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0xe0000>; // 896KB
+		label = "u-boot";
+	};
+
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x20000>; // 128KB
+		label = "u-boot-env";
+	};
+
+	kernel@100000 {
+		reg = <0x100000 0x900000>; // 9MB
+		label = "kernel";
+	};
+
+	rofs@a00000 {
+		reg = <0xa00000 0x2000000>; // 32MB
+		label = "rofs";
+	};
+
+	rwfs@2a00000 {
+		reg = <0x2a00000 0x1600000>; // 22MB
+		label = "rwfs";
+	};
+};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi
index 6c26524e93e1..b47e14063c38 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout.dtsi
+++ b/arch/arm/boot/dts/aspeed/openbmc-flash-layout.dtsi
@@ -20,7 +20,7 @@ partitions {
 		label = "kernel";
 	};
 
-	rofs@c0000 {
+	rofs@4c0000 {
 		reg = <0x4c0000 0x1740000>;
 		label = "rofs";
 	};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
deleted file mode 100644
index 90996eaf73b2..000000000000
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
- *
- * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
- *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Overkiz Kizbox";
-	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory {
-		reg = <0x20000000 0x2000000>;
-	};
-
-	clocks {
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				pinctrl-0 = <&pinctrl_macb_rmii
-				             &pinctrl_macb_rmii_mii_alt>;
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				timeout-sec = <15>;
-				atmel,max-heartbeat-sec = <16>;
-				atmel,min-heartbeat-sec = <0>;
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						ubi@20000 {
-							label = "ubi";
-							reg = <0x20000 0x7fe0000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset {
-			label = "PB_RST";
-			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-
-		user {
-			label = "PB_USER";
-			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x101>;
-			wakeup-source;
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-
-		rtc: pcf8563@51 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-	};
-
-	pwm_leds {
-		compatible = "pwm-leds";
-
-		network_green {
-			label = "pwm:green:network";
-			pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		network_red {
-			label = "pwm:red:network";
-			pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		user_green {
-			label = "pwm:green:user";
-			pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		user_red {
-			label = "pwm:red:user";
-			pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-
-	tcb_pwm: pwm {
-		compatible = "atmel,tcb-pwm";
-		#pwm-cells = <3>;
-		tc-block = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tcb1_tioa0
-			     &pinctrl_tcb1_tioa1
-			     &pinctrl_tcb1_tioa2
-			     &pinctrl_tcb1_tiob0>;
-	};
-};
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
deleted file mode 100644
index 86d821884bd4..000000000000
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ /dev/null
@@ -1,244 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board
- *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
- */
-/dts-v1/;
-#include "sama5d31.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Overkiz Kizbox 2";
-	compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			i2c1: i2c@f0018000 {
-				status = "okay";
-
-				pmic: act8865@5b {
-					compatible = "active-semi,act8865";
-					reg = <0x5b>;
-					status = "okay";
-
-					regulators {
-						vcc_1v8_reg: DCDC_REG1 {
-							regulator-name = "VCC_1V8";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <1800000>;
-							regulator-always-on;
-						};
-
-						vcc_1v2_reg: DCDC_REG2 {
-							regulator-name = "VCC_1V2";
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <1200000>;
-							regulator-always-on;
-						};
-
-						vcc_3v3_reg: DCDC_REG3 {
-							regulator-name = "VCC_3V3";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						vddfuse_reg: LDO_REG1 {
-							regulator-name = "FUSE_2V5";
-							regulator-min-microvolt = <2500000>;
-							regulator-max-microvolt = <2500000>;
-						};
-
-						vddana_reg: LDO_REG2 {
-							regulator-name = "VDDANA";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						vled_reg: LDO_REG3 {
-							regulator-name = "VLED";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						v3v8_rf_reg: LDO_REG4 {
-							regulator-name = "V3V8_RF";
-							regulator-min-microvolt = <3800000>;
-							regulator-max-microvolt = <3800000>;
-							regulator-always-on;
-						};
-					};
-				};
-			};
-
-			tcb0: timer@f0010000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>;
-				};
-
-				timer@1 {
-					compatible = "atmel,tcb-timer";
-					reg = <1>;
-				};
-			};
-
-			usart0: serial@f001c000 {
-				status = "okay";
-			};
-
-			usart1: serial@f0020000 {
-				status = "okay";
-			};
-
-			pwm0: pwm@f002c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
-					     &pinctrl_pwm0_pwmh1_1
-					     &pinctrl_pwm0_pwmh2_0>;
-				status = "okay";
-			};
-
-			adc0: adc@f8018000 {
-				atmel,adc-vref = <3333>;
-				status = "okay";
-			};
-
-			usart2: serial@f8020000 {
-				status = "okay";
-			};
-
-			macb1: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			dbgu: serial@ffffee00 {
-				status = "okay";
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-
-		usb1: ohci@600000 {
-			status = "okay";
-		};
-
-		usb2: ehci@700000 {
-			status = "okay";
-		};
-
-		ebi: ebi@10000000 {
-			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-
-				nand@3 {
-					reg = <0x3 0x0 0x2>;
-					atmel,rb = <0>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "hw";
-					nand-ecc-strength = <4>;
-					nand-ecc-step-size = <512>;
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						bootstrap@0 {
-							label = "bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						ubi@20000 {
-							label = "ubi";
-							reg = <0x20000 0x7fe0000>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		prog {
-			label = "PB_PROG";
-			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "PB_RST";
-			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-
-		user {
-			label = "PB_USER";
-			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x101>;
-			wakeup-source;
-		};
-	};
-
-	pwm_leds {
-		compatible = "pwm-leds";
-
-		blue {
-			label = "pwm:blue:user";
-			pwms = <&pwm0 2 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		green {
-			label = "pwm:green:user";
-			pwms = <&pwm0 1 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		red {
-			label = "pwm:red:user";
-			pwms = <&pwm0 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
deleted file mode 100644
index cb22f5fb055f..000000000000
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
- *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Overkiz Kizbox mini";
-	compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <4>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
-			status = "okay";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		prog {
-			label = "PB_PROG";
-			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "PB_RST";
-			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-
-	pwm_leds {
-		compatible = "pwm-leds";
-
-		green {
-			label = "pwm:green:user";
-			pwms = <&pwm0 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		red {
-			label = "pwm:red:user";
-			pwms = <&pwm0 1 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_addr_nand
-		     &pinctrl_ebi_data_0_7>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand-controller {
-		pinctrl-0 = <&pinctrl_nand_oe_we
-			     &pinctrl_nand_cs
-			     &pinctrl_nand_rb>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x800000>;
-			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <4>;
-			nand-ecc-step-size = <512>;
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				bootstrap@0 {
-					label = "bootstrap";
-					reg = <0x0 0x20000>;
-				};
-
-				ubi@20000 {
-					label = "ubi";
-					reg = <0x20000 0x7fe0000>;
-				};
-			};
-		};
-	};
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
-		     &pinctrl_pwm0_pwm1_1>;
-	status = "okay";
-};
-
-&tcb0 {
-	timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-&usart0 {
-	status = "okay";
-};
-
-&usb0 {
-	num-ports = <1>;
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
deleted file mode 100644
index 7788d5db65c2..000000000000
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ /dev/null
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
- *
- *  Copyright (c) 2017, Microchip Technology Inc.
- *                2017 Cristian Birsan <cristian.birsan@microchip.com>
- *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
- */
-#include "sama5d2.dtsi"
-#include "sama5d2-pinfunc.h"
-
-/ {
-	model = "Atmel SAMA5D27 SoM1";
-	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <24000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			qspi1: spi@f0024000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_qspi1_default>;
-
-				flash@0 {
-					compatible = "jedec,spi-nor";
-					reg = <0>;
-					spi-max-frequency = <80000000>;
-					spi-tx-bus-width = <4>;
-					spi-rx-bus-width = <4>;
-					m25p,fast-read;
-				};
-			};
-
-			macb0: ethernet@f8008000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_default>;
-				phy-mode = "rmii";
-
-				ethernet-phy@0 {
-					reg = <0x0>;
-					interrupt-parent = <&pioA>;
-					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_macb0_phy_irq>;
-				};
-			};
-
-			pinctrl@fc038000 {
-
-				pinctrl_qspi1_default: qspi1_default {
-					sck_cs {
-						pinmux = <PIN_PB5__QSPI1_SCK>,
-							 <PIN_PB6__QSPI1_CS>;
-						bias-disable;
-					};
-
-					data {
-						pinmux = <PIN_PB7__QSPI1_IO0>,
-							 <PIN_PB8__QSPI1_IO1>,
-							 <PIN_PB9__QSPI1_IO2>,
-							 <PIN_PB10__QSPI1_IO3>;
-						bias-pull-up;
-					};
-				};
-
-				pinctrl_macb0_default: macb0_default {
-					pinmux = <PIN_PD9__GTXCK>,
-						 <PIN_PD10__GTXEN>,
-						 <PIN_PD11__GRXDV>,
-						 <PIN_PD12__GRXER>,
-						 <PIN_PD13__GRX0>,
-						 <PIN_PD14__GRX1>,
-						 <PIN_PD15__GTX0>,
-						 <PIN_PD16__GTX1>,
-						 <PIN_PD17__GMDC>,
-						 <PIN_PD18__GMDIO>;
-					bias-disable;
-				};
-
-				pinctrl_macb0_phy_irq: macb0_phy_irq {
-					pinmux = <PIN_PD31__GPIO>;
-					bias-disable;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
deleted file mode 100644
index bda22700110c..000000000000
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ /dev/null
@@ -1,255 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
- *
- * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- */
-#include "at91sam9g20.dtsi"
-
-/ {
-
-	chosen {
-		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				board {
-					pinctrl_pck0_as_mck: pck0_as_mck {
-						atmel,pins =
-							<AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC1 periph B */
-					};
-
-				};
-
-				mmc0_slot1 {
-					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
-						atmel,pins =
-							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PC9 gpio CD pin pull up and deglitch */
-					};
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			tcb0: timer@fffa0000 {
-				timer@0 {
-					compatible = "atmel,tcb-timer";
-					reg = <0>, <1>;
-				};
-
-				timer@2 {
-					compatible = "atmel,tcb-timer";
-					reg = <2>;
-				};
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 =
-					<&pinctrl_usart0
-					 &pinctrl_usart0_rts
-					 &pinctrl_usart0_cts
-					 &pinctrl_usart0_dtr_dsr
-					 &pinctrl_usart0_dcd
-					 &pinctrl_usart0_ri>;
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			mmc0: mmc@fffa8000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0_slot1
-					&pinctrl_mmc0_clk
-					&pinctrl_mmc0_slot1_cmd_dat0
-					&pinctrl_mmc0_slot1_dat1_3>;
-				status = "okay";
-				slot@1 {
-					reg = <1>;
-					bus-width = <4>;
-					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			ssc0: ssc@fffbc000 {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_ssc0_tx>;
-			};
-
-			spi0: spi@fffc8000 {
-				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@1 {
-					compatible = "atmel,at45", "atmel,dataflash";
-					spi-max-frequency = <50000000>;
-					reg = <1>;
-				};
-			};
-
-			shdwc@fffffd10 {
-				atmel,wakeup-counter = <10>;
-				atmel,wakeup-rtt-timer;
-			};
-
-			rtc@fffffd20 {
-				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-
-			gpbr: syscon@fffffd50 {
-				status = "okay";
-			};
-		};
-
-		ebi: ebi@10000000 {
-			status = "okay";
-
-			nand_controller: nand-controller {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
-				pinctrl-names = "default";
-
-				nand@3 {
-					reg = <0x3 0x0 0x800000>;
-					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
-					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
-					nand-bus-width = <8>;
-					nand-ecc-mode = "soft";
-					nand-on-flash-bbt;
-					label = "atmel_nand";
-
-					partitions {
-						compatible = "fixed-partitions";
-						#address-cells = <1>;
-						#size-cells = <1>;
-
-						at91bootstrap@0 {
-							label = "at91bootstrap";
-							reg = <0x0 0x20000>;
-						};
-
-						barebox@20000 {
-							label = "barebox";
-							reg = <0x20000 0x40000>;
-						};
-
-						bareboxenv@60000 {
-							label = "bareboxenv";
-							reg = <0x60000 0x20000>;
-						};
-
-						bareboxenv2@80000 {
-							label = "bareboxenv2";
-							reg = <0x80000 0x20000>;
-						};
-
-						oftree@80000 {
-							label = "oftree";
-							reg = <0xa0000 0x20000>;
-						};
-
-						kernel@a0000 {
-							label = "kernel";
-							reg = <0xc0000 0x400000>;
-						};
-
-						rootfs@4a0000 {
-							label = "rootfs";
-							reg = <0x4c0000 0x7800000>;
-						};
-
-						data@7ca0000 {
-							label = "data";
-							reg = <0x7cc0000 0x8340000>;
-						};
-					};
-				};
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	i2c-gpio-0 {
-		status = "okay";
-
-		24c512@50 {
-			compatible = "atmel,24c512";
-			reg = <0x50>;
-		};
-
-		wm8731: wm8731@1b {
-			compatible = "wm8731";
-			reg = <0x1b>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		btn3 {
-			label = "Button 3";
-			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
-			linux,code = <0x103>;
-			wakeup-source;
-		};
-
-		btn4 {
-			label = "Button 4";
-			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
-			wakeup-source;
-		};
-	};
-
-	sound {
-		compatible = "atmel,at91sam9g20ek-wm8731-audio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pck0_as_mck>;
-
-		atmel,model = "wm8731 @ AT91SAMG20EK";
-
-		atmel,audio-routing =
-			"Ext Spk", "LHPOUT",
-			"Int Mic", "MICIN";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8731>;
-	};
-};
diff --git a/arch/arm/boot/dts/atlas6-evb.dts b/arch/arm/boot/dts/atlas6-evb.dts
deleted file mode 100644
index 89e430392f26..000000000000
--- a/arch/arm/boot/dts/atlas6-evb.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * DTS file for CSR SiRFatlas6 Evaluation Board
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- */
-
-/dts-v1/;
-
-/include/ "atlas6.dtsi"
-
-/ {
-	model = "CSR SiRFatlas6 Evaluation Board";
-	compatible = "sirf,atlas6-cb", "sirf,atlas6";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>;
-	};
-
-	axi {
-		peri-iobg {
-			uart@b0060000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart1_pins_a>;
-			};
-			spi@b00d0000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins_a>;
-				spi@0 {
-					compatible = "spidev";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-			spi@b0170000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins_a>;
-			};
-			i2c0: i2c@b00e0000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				lcd@40 {
-					compatible = "sirf,lcd";
-					reg = <0x40>;
-				};
-			};
-
-		};
-		disp-iobg {
-			lcd@90010000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcd_24pins_a>;
-			};
-		};
-	};
-	display: display@0 {
-	    panels {
-		panel0: panel@0 {
-			panel-name = "Innolux TFT";
-			hactive = <800>;
-			vactive = <480>;
-			left_margin = <20>;
-			right_margin = <234>;
-			upper_margin = <3>;
-			lower_margin = <41>;
-			hsync_len = <3>;
-			vsync_len = <2>;
-			pixclock = <33264000>;
-			sync = <3>;
-			timing = <0x88>;
-			};
-	    };
-	};
-};
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
deleted file mode 100644
index 8ac5d1524a43..000000000000
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ /dev/null
@@ -1,800 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * DTS file for CSR SiRFatlas6 SoC
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- */
-
-/ {
-	compatible = "sirf,atlas6";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* from bootloader */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			clocks = <&clks 12>;
-			operating-points = <
-				/* kHz    uV */
-				200000  1025000
-				400000  1025000
-				600000  1050000
-				800000  1100000
-			>;
-			clock-latency = <150000>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <29>;
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0x80000000>;
-
-		intc: interrupt-controller@80020000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "sirf,prima2-intc";
-			reg = <0x80020000 0x1000>;
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x88000000 0x88000000 0x40000>;
-
-			clks: clock-controller@88000000 {
-				compatible = "sirf,atlas6-clkc";
-				reg = <0x88000000 0x1000>;
-				interrupts = <3>;
-				#clock-cells = <1>;
-			};
-
-			rstc: reset-controller@88010000 {
-				compatible = "sirf,prima2-rstc";
-				reg = <0x88010000 0x1000>;
-				#reset-cells = <1>;
-			};
-
-			rsc-controller@88020000 {
-				compatible = "sirf,prima2-rsc";
-				reg = <0x88020000 0x1000>;
-			};
-
-			cphifbg@88030000 {
-				compatible = "sirf,prima2-cphifbg";
-				reg = <0x88030000 0x1000>;
-				clocks = <&clks 42>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90000000 0x90000000 0x10000>;
-
-			memory-controller@90000000 {
-				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x2000>;
-				interrupts = <27>;
-				clocks = <&clks 5>;
-			};
-
-			memc-monitor {
-				compatible = "sirf,prima2-memcmon";
-				reg = <0x90002000 0x200>;
-				interrupts = <4>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		disp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90010000 0x90010000 0x30000>;
-
-			lcd@90010000 {
-				compatible = "sirf,prima2-lcd";
-				reg = <0x90010000 0x20000>;
-				interrupts = <30>;
-				clocks = <&clks 34>;
-				display=<&display>;
-				/* later transfer to pwm */
-				bl-gpio = <&gpio 7 0>;
-				default-panel = <&panel0>;
-			};
-
-			vpp@90020000 {
-				compatible = "sirf,prima2-vpp";
-				reg = <0x90020000 0x10000>;
-				interrupts = <31>;
-				clocks = <&clks 35>;
-				resets = <&rstc 6>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x98000000 0x98000000 0x8000000>;
-
-			graphics@98000000 {
-				compatible = "powervr,sgx510";
-				reg = <0x98000000 0x8000000>;
-				interrupts = <6>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		graphics2d-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa0000000 0xa0000000 0x8000000>;
-
-			ble@a0000000 {
-				compatible = "sirf,atlas6-ble";
-				reg = <0xa0000000 0x2000>;
-				interrupts = <5>;
-				clocks = <&clks 33>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa8000000 0xa8000000 0x2000000>;
-
-			dspif@a8000000 {
-				compatible = "sirf,prima2-dspif";
-				reg = <0xa8000000 0x10000>;
-				interrupts = <9>;
-				resets = <&rstc 1>;
-			};
-
-			gps@a8010000 {
-				compatible = "sirf,prima2-gps";
-				reg = <0xa8010000 0x10000>;
-				interrupts = <7>;
-				clocks = <&clks 9>;
-				resets = <&rstc 2>;
-			};
-
-			dsp@a9000000 {
-				compatible = "sirf,prima2-dsp";
-				reg = <0xa9000000 0x1000000>;
-				interrupts = <8>;
-				clocks = <&clks 8>;
-				resets = <&rstc 0>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>,
-			       <0x56000000 0x56000000 0x1b00000>;
-
-			timer@b0020000 {
-				compatible = "sirf,prima2-tick";
-				reg = <0xb0020000 0x1000>;
-				interrupts = <0>;
-				clocks = <&clks 11>;
-			};
-
-			nand@b0030000 {
-				compatible = "sirf,prima2-nand";
-				reg = <0xb0030000 0x10000>;
-				interrupts = <41>;
-				clocks = <&clks 26>;
-			};
-
-			audio@b0040000 {
-				compatible = "sirf,prima2-audio";
-				reg = <0xb0040000 0x10000>;
-				interrupts = <35>;
-				clocks = <&clks 27>;
-			};
-
-			uart0: uart@b0050000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x1000>;
-				interrupts = <17>;
-				fifosize = <128>;
-				clocks = <&clks 13>;
-				dmas = <&dmac1 5>, <&dmac0 2>;
-				dma-names = "rx", "tx";
-			};
-
-			uart1: uart@b0060000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x1000>;
-				interrupts = <18>;
-				fifosize = <32>;
-				clocks = <&clks 14>;
-				dma-names = "no-rx", "no-tx";
-			};
-
-			uart2: uart@b0070000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x1000>;
-				interrupts = <19>;
-				fifosize = <128>;
-				clocks = <&clks 15>;
-				dmas = <&dmac0 6>, <&dmac0 7>;
-				dma-names = "rx", "tx";
-			};
-
-			usp0: usp@b0080000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0080000 0x10000>;
-				interrupts = <20>;
-				fifosize = <128>;
-				clocks = <&clks 28>;
-				dmas = <&dmac1 1>, <&dmac1 2>;
-				dma-names = "rx", "tx";
-			};
-
-			usp1: usp@b0090000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0090000 0x10000>;
-				interrupts = <21>;
-				fifosize = <128>;
-				clocks = <&clks 29>;
-				dmas = <&dmac0 14>, <&dmac0 15>;
-				dma-names = "rx", "tx";
-			};
-
-			dmac0: dma-controller@b00b0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb00b0000 0x10000>;
-				interrupts = <12>;
-				clocks = <&clks 24>;
-				#dma-cells = <1>;
-			};
-
-			dmac1: dma-controller@b0160000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb0160000 0x10000>;
-				interrupts = <13>;
-				clocks = <&clks 25>;
-				#dma-cells = <1>;
-			};
-
-			vip@b00C0000 {
-				compatible = "sirf,prima2-vip";
-				reg = <0xb00C0000 0x10000>;
-				clocks = <&clks 31>;
-				interrupts = <14>;
-				sirf,vip-dma-rx-channel = <16>;
-			};
-
-			spi0: spi@b00d0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb00d0000 0x10000>;
-				interrupts = <15>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac1 9>,
-				     <&dmac1 4>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 19>;
-				resets = <&rstc 26>;
-				status = "disabled";
-			};
-
-			spi1: spi@b0170000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb0170000 0x10000>;
-				interrupts = <16>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac0 12>,
-				     <&dmac0 13>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 20>;
-				resets = <&rstc 27>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@b00e0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00e0000 0x10000>;
-				interrupts = <24>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 17>;
-			};
-
-			i2c1: i2c@b00f0000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00f0000 0x10000>;
-				interrupts = <25>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 18>;
-			};
-
-			tsc@b0110000 {
-				compatible = "sirf,prima2-tsc";
-				reg = <0xb0110000 0x10000>;
-				interrupts = <33>;
-				clocks = <&clks 16>;
-			};
-
-			gpio: pinctrl@b0120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas6-pinctrl";
-				reg = <0xb0120000 0x10000>;
-				interrupts = <43 44 45 46 47>;
-				gpio-controller;
-				interrupt-controller;
-
-				lcd_16pins_a: lcd0@0 {
-					lcd {
-						sirf,pins = "lcd_16bitsgrp";
-						sirf,function = "lcd_16bits";
-					};
-				};
-				lcd_18pins_a: lcd0@1 {
-					lcd {
-						sirf,pins = "lcd_18bitsgrp";
-						sirf,function = "lcd_18bits";
-					};
-				};
-				lcd_24pins_a: lcd0@2 {
-					lcd {
-						sirf,pins = "lcd_24bitsgrp";
-						sirf,function = "lcd_24bits";
-					};
-				};
-				lcdrom_pins_a: lcdrom0@0 {
-					lcd {
-						sirf,pins = "lcdromgrp";
-						sirf,function = "lcdrom";
-					};
-				};
-				uart0_pins_a: uart0@0 {
-					uart {
-						sirf,pins = "uart0grp";
-						sirf,function = "uart0";
-					};
-				};
-				uart0_noflow_pins_a: uart0@1 {
-					uart {
-						sirf,pins = "uart0_nostreamctrlgrp";
-						sirf,function = "uart0_nostreamctrl";
-					};
-				};
-				uart1_pins_a: uart1@0 {
-					uart {
-						sirf,pins = "uart1grp";
-						sirf,function = "uart1";
-					};
-				};
-				uart2_pins_a: uart2@0 {
-					uart {
-						sirf,pins = "uart2grp";
-						sirf,function = "uart2";
-					};
-				};
-				uart2_noflow_pins_a: uart2@1 {
-					uart {
-						sirf,pins = "uart2_nostreamctrlgrp";
-						sirf,function = "uart2_nostreamctrl";
-					};
-				};
-				spi0_pins_a: spi0@0 {
-					spi {
-						sirf,pins = "spi0grp";
-						sirf,function = "spi0";
-					};
-				};
-				spi1_pins_a: spi1@0 {
-					spi {
-						sirf,pins = "spi1grp";
-						sirf,function = "spi1";
-					};
-				};
-				i2c0_pins_a: i2c0@0 {
-					i2c {
-						sirf,pins = "i2c0grp";
-						sirf,function = "i2c0";
-					};
-				};
-				i2c1_pins_a: i2c1@0 {
-					i2c {
-						sirf,pins = "i2c1grp";
-						sirf,function = "i2c1";
-					};
-				};
-                                pwm0_pins_a: pwm0@0 {
-                                        pwm {
-                                                sirf,pins = "pwm0grp";
-                                                sirf,function = "pwm0";
-                                        };
-                                };
-                                pwm1_pins_a: pwm1@0 {
-                                        pwm {
-                                                sirf,pins = "pwm1grp";
-                                                sirf,function = "pwm1";
-                                        };
-                                };
-                                pwm2_pins_a: pwm2@0 {
-                                        pwm {
-                                                sirf,pins = "pwm2grp";
-                                                sirf,function = "pwm2";
-                                        };
-                                };
-                                pwm3_pins_a: pwm3@0 {
-                                        pwm {
-                                                sirf,pins = "pwm3grp";
-                                                sirf,function = "pwm3";
-                                        };
-                                };
-				pwm4_pins_a: pwm4@0 {
-                                        pwm {
-                                                sirf,pins = "pwm4grp";
-                                                sirf,function = "pwm4";
-                                        };
-                                };
-                                gps_pins_a: gps@0 {
-                                        gps {
-                                                sirf,pins = "gpsgrp";
-                                                sirf,function = "gps";
-                                        };
-                                };
-                                vip_pins_a: vip@0 {
-                                        vip {
-                                                sirf,pins = "vipgrp";
-                                                sirf,function = "vip";
-                                        };
-                                };
-                                sdmmc0_pins_a: sdmmc0@0 {
-                                        sdmmc0 {
-                                                sirf,pins = "sdmmc0grp";
-                                                sirf,function = "sdmmc0";
-                                        };
-                                };
-                                sdmmc1_pins_a: sdmmc1@0 {
-                                        sdmmc1 {
-                                                sirf,pins = "sdmmc1grp";
-                                                sirf,function = "sdmmc1";
-                                        };
-                                };
-                                sdmmc2_pins_a: sdmmc2@0 {
-                                        sdmmc2 {
-                                                sirf,pins = "sdmmc2grp";
-                                                sirf,function = "sdmmc2";
-                                        };
-                                };
-				sdmmc2_nowp_pins_a: sdmmc2_nowp@0 {
-                                        sdmmc2_nowp {
-                                                sirf,pins = "sdmmc2_nowpgrp";
-                                                sirf,function = "sdmmc2_nowp";
-                                        };
-                                };
-                                sdmmc3_pins_a: sdmmc3@0 {
-                                        sdmmc3 {
-                                                sirf,pins = "sdmmc3grp";
-                                                sirf,function = "sdmmc3";
-                                        };
-                                };
-                                sdmmc5_pins_a: sdmmc5@0 {
-                                        sdmmc5 {
-                                                sirf,pins = "sdmmc5grp";
-                                                sirf,function = "sdmmc5";
-                                        };
-                                };
-				i2s_mclk_pins_a: i2s_mclk@0 {
-                                        i2s_mclk {
-                                                sirf,pins = "i2smclkgrp";
-                                                sirf,function = "i2s_mclk";
-                                        };
-                                };
-				i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 {
-                                        i2s_ext_clk_input {
-                                                sirf,pins = "i2s_ext_clk_inputgrp";
-                                                sirf,function = "i2s_ext_clk_input";
-                                        };
-                                };
-                                i2s_pins_a: i2s@0 {
-                                        i2s {
-                                                sirf,pins = "i2sgrp";
-                                                sirf,function = "i2s";
-                                        };
-                                };
-				i2s_no_din_pins_a: i2s_no_din@0 {
-                                        i2s_no_din {
-                                                sirf,pins = "i2s_no_dingrp";
-                                                sirf,function = "i2s_no_din";
-                                        };
-                                };
-				i2s_6chn_pins_a: i2s_6chn@0 {
-                                        i2s_6chn {
-                                                sirf,pins = "i2s_6chngrp";
-                                                sirf,function = "i2s_6chn";
-                                        };
-                                };
-                                ac97_pins_a: ac97@0 {
-                                        ac97 {
-                                                sirf,pins = "ac97grp";
-                                                sirf,function = "ac97";
-                                        };
-                                };
-                                nand_pins_a: nand@0 {
-                                        nand {
-                                                sirf,pins = "nandgrp";
-                                                sirf,function = "nand";
-                                        };
-                                };
-                                usp0_pins_a: usp0@0 {
-                                        usp0 {
-                                                sirf,pins = "usp0grp";
-                                                sirf,function = "usp0";
-                                        };
-                                };
-				usp0_uart_nostreamctrl_pins_a: usp0@1 {
-                                        usp0 {
-                                                sirf,pins = "usp0_uart_nostreamctrl_grp";
-                                                sirf,function = "usp0_uart_nostreamctrl";
-                                        };
-                                };
-				usp0_only_utfs_pins_a: usp0@2 {
-					usp0 {
-						sirf,pins = "usp0_only_utfs_grp";
-						sirf,function = "usp0_only_utfs";
-					};
-				};
-				usp0_only_urfs_pins_a: usp0@3 {
-					usp0 {
-						sirf,pins = "usp0_only_urfs_grp";
-						sirf,function = "usp0_only_urfs";
-					};
-				};
-                                usp1_pins_a: usp1@0 {
-                                        usp1 {
-                                                sirf,pins = "usp1grp";
-                                                sirf,function = "usp1";
-                                        };
-                                };
-				usp1_uart_nostreamctrl_pins_a: usp1@1 {
-                                        usp1 {
-                                                sirf,pins = "usp1_uart_nostreamctrl_grp";
-                                                sirf,function = "usp1_uart_nostreamctrl";
-                                        };
-                                };
-                                usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 {
-                                        usb0_upli_drvbus {
-                                                sirf,pins = "usb0_upli_drvbusgrp";
-                                                sirf,function = "usb0_upli_drvbus";
-                                        };
-                                };
-                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
-                                        usb1_utmi_drvbus {
-                                                sirf,pins = "usb1_utmi_drvbusgrp";
-                                                sirf,function = "usb1_utmi_drvbus";
-                                        };
-                                };
-                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
-                                        usb1_dp_dn {
-                                                sirf,pins = "usb1_dp_dngrp";
-                                                sirf,function = "usb1_dp_dn";
-                                        };
-                                };
-                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
-                                        uart1_route_io_usb1 {
-                                                sirf,pins = "uart1_route_io_usb1grp";
-                                                sirf,function = "uart1_route_io_usb1";
-                                        };
-                                };
-                                warm_rst_pins_a: warm_rst@0 {
-                                        warm_rst {
-                                                sirf,pins = "warm_rstgrp";
-                                                sirf,function = "warm_rst";
-                                        };
-                                };
-                                pulse_count_pins_a: pulse_count@0 {
-                                        pulse_count {
-                                                sirf,pins = "pulse_countgrp";
-                                                sirf,function = "pulse_count";
-                                        };
-                                };
-                                cko0_pins_a: cko0@0 {
-                                        cko0 {
-                                                sirf,pins = "cko0grp";
-                                                sirf,function = "cko0";
-                                        };
-                                };
-                                cko1_pins_a: cko1@0 {
-                                        cko1 {
-                                                sirf,pins = "cko1grp";
-                                                sirf,function = "cko1";
-                                        };
-                                };
-			};
-
-			pwm@b0130000 {
-				compatible = "sirf,prima2-pwm";
-				reg = <0xb0130000 0x10000>;
-				clocks = <&clks 21>;
-			};
-
-			efusesys@b0140000 {
-				compatible = "sirf,prima2-efuse";
-				reg = <0xb0140000 0x10000>;
-				clocks = <&clks 22>;
-			};
-
-			pulsec@b0150000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0xb0150000 0x10000>;
-				interrupts = <48>;
-				clocks = <&clks 23>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,prima2-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x56000000 0x56000000 0x1b00000>;
-
-				sd0: sdhci@56000000 {
-					cell-index = <0>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56000000 0x100000>;
-					interrupts = <38>;
-					bus-width = <8>;
-					clocks = <&clks 36>;
-				};
-
-				sd1: sdhci@56100000 {
-					cell-index = <1>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56100000 0x100000>;
-					interrupts = <38>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 36>;
-				};
-
-				sd2: sdhci@56200000 {
-					cell-index = <2>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56200000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 37>;
-				};
-
-				sd3: sdhci@56300000 {
-					cell-index = <3>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56300000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 37>;
-				};
-
-				sd5: sdhci@56500000 {
-					cell-index = <5>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56500000 0x100000>;
-					interrupts = <39>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 38>;
-				};
-
-				pci-copy@57900000 {
-					compatible = "sirf,prima2-pcicp";
-					reg = <0x57900000 0x100000>;
-					interrupts = <40>;
-				};
-
-				rom-interface@57a00000 {
-					compatible = "sirf,prima2-romif";
-					reg = <0x57a00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80030000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,prima2-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <55 56 57>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,prima2-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <52 53 54>;
-			};
-
-			minigpsrtc@2000 {
-				compatible = "sirf,prima2-minigpsrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <54>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,prima2-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb8000000 0xb8000000 0x40000>;
-
-			usb0: usb@b00e0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8000000 0x10000>;
-				interrupts = <10>;
-				clocks = <&clks 40>;
-			};
-
-			usb1: usb@b00f0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8010000 0x10000>;
-				interrupts = <11>;
-				clocks = <&clks 41>;
-			};
-
-			security@b00f0000 {
-				compatible = "sirf,prima2-security";
-				reg = <0xb8030000 0x10000>;
-				interrupts = <42>;
-				clocks = <&clks 7>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts
deleted file mode 100644
index e0c0291ac9fd..000000000000
--- a/arch/arm/boot/dts/atlas7-evb.dts
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * DTS file for CSR SiRFatlas7 Evaluation Board
- *
- * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
- */
-
-/dts-v1/;
-
-/include/ "atlas7.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "CSR SiRFatlas7 Evaluation Board";
-	compatible = "sirf,atlas7-cb", "sirf,atlas7";
-
-	chosen {
-		bootargs = "console=ttySiRF1,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vpp_reserved: vpp_mem@5e800000 {
-			compatible = "sirf,reserved-memory";
-			reg = <0x5e800000 0x800000>;
-		};
-
-		nanddisk_reserved: nanddisk@46000000 {
-			reg = <0x46000000 0x200000>;
-			no-map;
-		};
-	};
-
-
-	noc {
-		mediam {
-			nand@17050000 {
-				memory-region = <&nanddisk_reserved>;
-			};
-		};
-
-		gnssm {
-			spi1: spi@18200000 {
-				status = "okay";
-				spiflash: macronix@0{
-					status = "okay";
-					compatible = "macronix,mx25l6405d";
-					reg = <0>;
-					spi-max-frequency = <37500000>;
-					spi-cpha;
-					spi-cpol;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partitions@0 {
-						label = "myspiboot";
-						reg = <0x0 0x800000>;
-					};
-				};
-			};
-		};
-
-		btm {
-			uart6: uart@11000000 {
-				status = "okay";
-				uart-has-rtscts;
-			};
-		};
-
-		disp-iobg {
-			vpp@13110000 {
-				memory-region = <&vpp_reserved>;
-			};
-		};
-
-		display0: display@0 {
-			compatible = "lvds-panel";
-			source = "lvds.0";
-
-			bl-gpios = <&gpio_1 63 0>;
-			data-lines  = <24>;
-
-			display-timings {
-				native-mode = <&timing0>;
-				timing0: timing0 {
-					clock-frequency = <60000000>;
-					hactive = <1024>;
-					vactive = <600>;
-					hfront-porch = <220>;
-					hback-porch = <100>;
-					hsync-len = <1>;
-					vback-porch = <10>;
-					vfront-porch = <25>;
-					vsync-len = <1>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <1>;
-				};
-			};
-		};
-
-		gpio_keys {
-			compatible = "gpio-keys";
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			rearview_key {
-				label = "rearview key";
-				linux,code = <KEY_CAMERA>;
-				gpios = <&gpio_1 3 GPIO_ACTIVE_LOW>;
-				debounce_interval = <100>;
-			};
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi
deleted file mode 100644
index 99c9d9d9267f..000000000000
--- a/arch/arm/boot/dts/atlas7.dtsi
+++ /dev/null
@@ -1,1955 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * DTS file for CSR SiRFatlas7 SoC
- *
- * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
- */
-
-/ {
-	compatible = "sirf,atlas7";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial9 = &usp2;
-		spi1 = &spi1;
-		spi2 = &usp1;
-		spi3 = &usp2;
-		spi4 = &usp3;
-	};
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-		};
-	};
-
-	clocks {
-		xinw {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "xinw";
-		};
-		xin {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-			clock-output-names = "xin";
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupts = <0 29 4>, <0 82 4>;
-	};
-
-	noc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x10000000 0x10000000 0xc0000000>;
-
-		gic: interrupt-controller@10301000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x10301000 0x1000>,
-			     <0x10302000 0x0100>;
-		};
-
-		pmu_regulator: pmu_regulator@10E30020 {
-			compatible = "sirf,atlas7-pmu-ldo";
-			reg = <0x10E30020 0x4>;
-			ldo: ldo {
-				regulator-name = "ldo";
-			};
-		};
-
-		atlas7_codec: atlas7_codec@10E30000 {
-			#sound-dai-cells = <0>;
-			compatible = "sirf,atlas7-codec";
-			reg = <0x10E30000 0x400>;
-			clocks = <&car 62>;
-			ldo-supply = <&ldo>;
-		};
-
-		atlas7_iacc: atlas7_iacc@10D01000 {
-			#sound-dai-cells = <0>;
-			compatible = "sirf,atlas7-iacc";
-			reg = <0x10D01000 0x100>;
-			dmas = <&dmac3 0>, <&dmac3 7>, <&dmac3 8>,
-				<&dmac3 3>, <&dmac3 9>;
-			dma-names = "rx", "tx0", "tx1", "tx2", "tx3";
-			clocks = <&car 62>;
-		};
-
-		ipc@13240000 {
-			compatible = "sirf,atlas7-ipc";
-			ranges = <0x13240000 0x13240000 0x00010000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			hwspinlock {
-				compatible = "sirf,hwspinlock";
-				reg = <0x13240000 0x00010000>;
-
-				num-spinlocks = <30>;
-			};
-
-			ns_m3_rproc@0 {
-				compatible = "sirf,ns2m30-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 123 0>;
-			};
-
-			ns_m3_rproc@1 {
-				compatible = "sirf,ns2m31-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 126 0>;
-			};
-
-			ns_kal_rproc@0 {
-				compatible = "sirf,ns2kal0-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 124 0>;
-			};
-
-			ns_kal_rproc@1 {
-				compatible = "sirf,ns2kal1-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 127 0>;
-			};
-		};
-
-		pinctrl: ioc@18880000 {
-			compatible = "sirf,atlas7-ioc";
-			reg = <0x18880000 0x1000>,
-				<0x10E40000 0x1000>;
-
-			audio_ac97_pmx: audio_ac97@0 {
-				audio_ac97 {
-					groups = "audio_ac97_grp";
-					function = "audio_ac97";
-				};
-			};
-
-			audio_func_dbg_pmx: audio_func_dbg@0 {
-				audio_func_dbg {
-					groups = "audio_func_dbg_grp";
-					function = "audio_func_dbg";
-				};
-			};
-
-			audio_i2s_pmx: audio_i2s@0 {
-				audio_i2s {
-					groups = "audio_i2s_grp";
-					function = "audio_i2s";
-				};
-			};
-
-			audio_i2s_2ch_pmx: audio_i2s_2ch@0 {
-				audio_i2s_2ch {
-					groups = "audio_i2s_2ch_grp";
-					function = "audio_i2s_2ch";
-				};
-			};
-
-			audio_i2s_extclk_pmx: audio_i2s_extclk@0 {
-				audio_i2s_extclk {
-					groups = "audio_i2s_extclk_grp";
-					function = "audio_i2s_extclk";
-				};
-			};
-
-			audio_uart0_pmx: audio_uart0@0 {
-				audio_uart0 {
-					groups = "audio_uart0_grp";
-					function = "audio_uart0";
-				};
-			};
-
-			audio_uart1_pmx: audio_uart1@0 {
-				audio_uart1 {
-					groups = "audio_uart1_grp";
-					function = "audio_uart1";
-				};
-			};
-
-			audio_uart2_pmx0: audio_uart2@0 {
-				audio_uart2_0 {
-					groups = "audio_uart2_grp0";
-					function = "audio_uart2_m0";
-				};
-			};
-
-			audio_uart2_pmx1: audio_uart2@1 {
-				audio_uart2_1 {
-					groups = "audio_uart2_grp1";
-					function = "audio_uart2_m1";
-				};
-			};
-
-			c_can_trnsvr_pmx: c_can_trnsvr@0 {
-				c_can_trnsvr {
-					groups = "c_can_trnsvr_grp";
-					function = "c_can_trnsvr";
-				};
-			};
-
-			c0_can_pmx0: c0_can@0 {
-				c0_can_0 {
-					groups = "c0_can_grp0";
-					function = "c0_can_m0";
-				};
-			};
-
-			c0_can_pmx1: c0_can@1 {
-				c0_can_1 {
-					groups = "c0_can_grp1";
-					function = "c0_can_m1";
-				};
-			};
-
-			c1_can_pmx0: c1_can@0 {
-				c1_can_0 {
-					groups = "c1_can_grp0";
-					function = "c1_can_m0";
-				};
-			};
-
-			c1_can_pmx1: c1_can@1 {
-				c1_can_1 {
-					groups = "c1_can_grp1";
-					function = "c1_can_m1";
-				};
-			};
-
-			c1_can_pmx2: c1_can@2 {
-				c1_can_2 {
-					groups = "c1_can_grp2";
-					function = "c1_can_m2";
-				};
-			};
-
-			ca_audio_lpc_pmx: ca_audio_lpc@0 {
-				ca_audio_lpc {
-					groups = "ca_audio_lpc_grp";
-					function = "ca_audio_lpc";
-				};
-			};
-
-			ca_bt_lpc_pmx: ca_bt_lpc@0 {
-				ca_bt_lpc {
-					groups = "ca_bt_lpc_grp";
-					function = "ca_bt_lpc";
-				};
-			};
-
-			ca_coex_pmx: ca_coex@0 {
-				ca_coex {
-					groups = "ca_coex_grp";
-					function = "ca_coex";
-				};
-			};
-
-			ca_curator_lpc_pmx: ca_curator_lpc@0 {
-				ca_curator_lpc {
-					groups = "ca_curator_lpc_grp";
-					function = "ca_curator_lpc";
-				};
-			};
-
-			ca_pcm_debug_pmx: ca_pcm_debug@0 {
-				ca_pcm_debug {
-					groups = "ca_pcm_debug_grp";
-					function = "ca_pcm_debug";
-				};
-			};
-
-			ca_pio_pmx: ca_pio@0 {
-				ca_pio {
-					groups = "ca_pio_grp";
-					function = "ca_pio";
-				};
-			};
-
-			ca_sdio_debug_pmx: ca_sdio_debug@0 {
-				ca_sdio_debug {
-					groups = "ca_sdio_debug_grp";
-					function = "ca_sdio_debug";
-				};
-			};
-
-			ca_spi_pmx: ca_spi@0 {
-				ca_spi {
-					groups = "ca_spi_grp";
-					function = "ca_spi";
-				};
-			};
-
-			ca_trb_pmx: ca_trb@0 {
-				ca_trb {
-					groups = "ca_trb_grp";
-					function = "ca_trb";
-				};
-			};
-
-			ca_uart_debug_pmx: ca_uart_debug@0 {
-				ca_uart_debug {
-					groups = "ca_uart_debug_grp";
-					function = "ca_uart_debug";
-				};
-			};
-
-			clkc_pmx0: clkc@0 {
-				clkc_0 {
-					groups = "clkc_grp0";
-					function = "clkc_m0";
-				};
-			};
-
-			clkc_pmx1: clkc@1 {
-				clkc_1 {
-					groups = "clkc_grp1";
-					function = "clkc_m1";
-				};
-			};
-
-			gn_gnss_i2c_pmx: gn_gnss_i2c@0 {
-				gn_gnss_i2c {
-					groups = "gn_gnss_i2c_grp";
-					function = "gn_gnss_i2c";
-				};
-			};
-
-			gn_gnss_uart_nopause_pmx: gn_gnss_uart_nopause@0 {
-				gn_gnss_uart_nopause {
-					groups = "gn_gnss_uart_nopause_grp";
-					function = "gn_gnss_uart_nopause";
-				};
-			};
-
-			gn_gnss_uart_pmx: gn_gnss_uart@0 {
-				gn_gnss_uart {
-					groups = "gn_gnss_uart_grp";
-					function = "gn_gnss_uart";
-				};
-			};
-
-			gn_trg_spi_pmx0: gn_trg_spi@0 {
-				gn_trg_spi_0 {
-					groups = "gn_trg_spi_grp0";
-					function = "gn_trg_spi_m0";
-				};
-			};
-
-			gn_trg_spi_pmx1: gn_trg_spi@1 {
-				gn_trg_spi_1 {
-					groups = "gn_trg_spi_grp1";
-					function = "gn_trg_spi_m1";
-				};
-			};
-
-			cvbs_dbg_pmx: cvbs_dbg@0 {
-				cvbs_dbg {
-					groups = "cvbs_dbg_grp";
-					function = "cvbs_dbg";
-				};
-			};
-
-			cvbs_dbg_test_pmx0: cvbs_dbg_test@0 {
-				cvbs_dbg_test_0 {
-					groups = "cvbs_dbg_test_grp0";
-					function = "cvbs_dbg_test_m0";
-				};
-			};
-
-			cvbs_dbg_test_pmx1: cvbs_dbg_test@1 {
-				cvbs_dbg_test_1 {
-					groups = "cvbs_dbg_test_grp1";
-					function = "cvbs_dbg_test_m1";
-				};
-			};
-
-			cvbs_dbg_test_pmx2: cvbs_dbg_test@2 {
-				cvbs_dbg_test_2 {
-					groups = "cvbs_dbg_test_grp2";
-					function = "cvbs_dbg_test_m2";
-				};
-			};
-
-			cvbs_dbg_test_pmx3: cvbs_dbg_test@3 {
-				cvbs_dbg_test_3 {
-					groups = "cvbs_dbg_test_grp3";
-					function = "cvbs_dbg_test_m3";
-				};
-			};
-
-			cvbs_dbg_test_pmx4: cvbs_dbg_test@4 {
-				cvbs_dbg_test_4 {
-					groups = "cvbs_dbg_test_grp4";
-					function = "cvbs_dbg_test_m4";
-				};
-			};
-
-			cvbs_dbg_test_pmx5: cvbs_dbg_test@5 {
-				cvbs_dbg_test_5 {
-					groups = "cvbs_dbg_test_grp5";
-					function = "cvbs_dbg_test_m5";
-				};
-			};
-
-			cvbs_dbg_test_pmx6: cvbs_dbg_test@6 {
-				cvbs_dbg_test_6 {
-					groups = "cvbs_dbg_test_grp6";
-					function = "cvbs_dbg_test_m6";
-				};
-			};
-
-			cvbs_dbg_test_pmx7: cvbs_dbg_test@7 {
-				cvbs_dbg_test_7 {
-					groups = "cvbs_dbg_test_grp7";
-					function = "cvbs_dbg_test_m7";
-				};
-			};
-
-			cvbs_dbg_test_pmx8: cvbs_dbg_test@8 {
-				cvbs_dbg_test_8 {
-					groups = "cvbs_dbg_test_grp8";
-					function = "cvbs_dbg_test_m8";
-				};
-			};
-
-			cvbs_dbg_test_pmx9: cvbs_dbg_test@9 {
-				cvbs_dbg_test_9 {
-					groups = "cvbs_dbg_test_grp9";
-					function = "cvbs_dbg_test_m9";
-				};
-			};
-
-			cvbs_dbg_test_pmx10: cvbs_dbg_test@10 {
-				cvbs_dbg_test_10 {
-					groups = "cvbs_dbg_test_grp10";
-					function = "cvbs_dbg_test_m10";
-				};
-			};
-
-			cvbs_dbg_test_pmx11: cvbs_dbg_test@11 {
-				cvbs_dbg_test_11 {
-					groups = "cvbs_dbg_test_grp11";
-					function = "cvbs_dbg_test_m11";
-				};
-			};
-
-			cvbs_dbg_test_pmx12: cvbs_dbg_test@12 {
-				cvbs_dbg_test_12 {
-					groups = "cvbs_dbg_test_grp12";
-					function = "cvbs_dbg_test_m12";
-				};
-			};
-
-			cvbs_dbg_test_pmx13: cvbs_dbg_test@13 {
-				cvbs_dbg_test_13 {
-					groups = "cvbs_dbg_test_grp13";
-					function = "cvbs_dbg_test_m13";
-				};
-			};
-
-			cvbs_dbg_test_pmx14: cvbs_dbg_test@14 {
-				cvbs_dbg_test_14 {
-					groups = "cvbs_dbg_test_grp14";
-					function = "cvbs_dbg_test_m14";
-				};
-			};
-
-			cvbs_dbg_test_pmx15: cvbs_dbg_test@15 {
-				cvbs_dbg_test_15 {
-					groups = "cvbs_dbg_test_grp15";
-					function = "cvbs_dbg_test_m15";
-				};
-			};
-
-			gn_gnss_power_pmx: gn_gnss_power@0 {
-				gn_gnss_power {
-					groups = "gn_gnss_power_grp";
-					function = "gn_gnss_power";
-				};
-			};
-
-			gn_gnss_sw_status_pmx: gn_gnss_sw_status@0 {
-				gn_gnss_sw_status {
-					groups = "gn_gnss_sw_status_grp";
-					function = "gn_gnss_sw_status";
-				};
-			};
-
-			gn_gnss_eclk_pmx: gn_gnss_eclk@0 {
-				gn_gnss_eclk {
-					groups = "gn_gnss_eclk_grp";
-					function = "gn_gnss_eclk";
-				};
-			};
-
-			gn_gnss_irq1_pmx0: gn_gnss_irq1@0 {
-				gn_gnss_irq1_0 {
-					groups = "gn_gnss_irq1_grp0";
-					function = "gn_gnss_irq1_m0";
-				};
-			};
-
-			gn_gnss_irq2_pmx0: gn_gnss_irq2@0 {
-				gn_gnss_irq2_0 {
-					groups = "gn_gnss_irq2_grp0";
-					function = "gn_gnss_irq2_m0";
-				};
-			};
-
-			gn_gnss_tm_pmx: gn_gnss_tm@0 {
-				gn_gnss_tm {
-					groups = "gn_gnss_tm_grp";
-					function = "gn_gnss_tm";
-				};
-			};
-
-			gn_gnss_tsync_pmx: gn_gnss_tsync@0 {
-				gn_gnss_tsync {
-					groups = "gn_gnss_tsync_grp";
-					function = "gn_gnss_tsync";
-				};
-			};
-
-			gn_io_gnsssys_sw_cfg_pmx: gn_io_gnsssys_sw_cfg@0 {
-				gn_io_gnsssys_sw_cfg {
-					groups = "gn_io_gnsssys_sw_cfg_grp";
-					function = "gn_io_gnsssys_sw_cfg";
-				};
-			};
-
-			gn_trg_pmx0: gn_trg@0 {
-				gn_trg_0 {
-					groups = "gn_trg_grp0";
-					function = "gn_trg_m0";
-				};
-			};
-
-			gn_trg_pmx1: gn_trg@1 {
-				gn_trg_1 {
-					groups = "gn_trg_grp1";
-					function = "gn_trg_m1";
-				};
-			};
-
-			gn_trg_shutdown_pmx0: gn_trg_shutdown@0 {
-				gn_trg_shutdown_0 {
-					groups = "gn_trg_shutdown_grp0";
-					function = "gn_trg_shutdown_m0";
-				};
-			};
-
-			gn_trg_shutdown_pmx1: gn_trg_shutdown@1 {
-				gn_trg_shutdown_1 {
-					groups = "gn_trg_shutdown_grp1";
-					function = "gn_trg_shutdown_m1";
-				};
-			};
-
-			gn_trg_shutdown_pmx2: gn_trg_shutdown@2 {
-				gn_trg_shutdown_2 {
-					groups = "gn_trg_shutdown_grp2";
-					function = "gn_trg_shutdown_m2";
-				};
-			};
-
-			gn_trg_shutdown_pmx3: gn_trg_shutdown@3 {
-				gn_trg_shutdown_3 {
-					groups = "gn_trg_shutdown_grp3";
-					function = "gn_trg_shutdown_m3";
-				};
-			};
-
-			i2c0_pmx: i2c0@0 {
-				i2c0 {
-					groups = "i2c0_grp";
-					function = "i2c0";
-				};
-			};
-
-			i2c1_pmx: i2c1@0 {
-				i2c1 {
-					groups = "i2c1_grp";
-					function = "i2c1";
-				};
-			};
-
-			jtag_pmx0: jtag@0 {
-				jtag_0 {
-					groups = "jtag_grp0";
-					function = "jtag_m0";
-				};
-			};
-
-			ks_kas_spi_pmx0: ks_kas_spi@0 {
-				ks_kas_spi_0 {
-					groups = "ks_kas_spi_grp0";
-					function = "ks_kas_spi_m0";
-				};
-			};
-
-			ld_ldd_pmx: ld_ldd@0 {
-				ld_ldd {
-					groups = "ld_ldd_grp";
-					function = "ld_ldd";
-				};
-			};
-
-			ld_ldd_16bit_pmx: ld_ldd_16bit@0 {
-				ld_ldd_16bit {
-					groups = "ld_ldd_16bit_grp";
-					function = "ld_ldd_16bit";
-				};
-			};
-
-			ld_ldd_fck_pmx: ld_ldd_fck@0 {
-				ld_ldd_fck {
-					groups = "ld_ldd_fck_grp";
-					function = "ld_ldd_fck";
-				};
-			};
-
-			ld_ldd_lck_pmx: ld_ldd_lck@0 {
-				ld_ldd_lck {
-					groups = "ld_ldd_lck_grp";
-					function = "ld_ldd_lck";
-				};
-			};
-
-			lr_lcdrom_pmx: lr_lcdrom@0 {
-				lr_lcdrom {
-					groups = "lr_lcdrom_grp";
-					function = "lr_lcdrom";
-				};
-			};
-
-			lvds_analog_pmx: lvds_analog@0 {
-				lvds_analog {
-					groups = "lvds_analog_grp";
-					function = "lvds_analog";
-				};
-			};
-
-			nd_df_pmx: nd_df@0 {
-				nd_df {
-					groups = "nd_df_grp";
-					function = "nd_df";
-				};
-			};
-
-			nd_df_nowp_pmx: nd_df_nowp@0 {
-				nd_df_nowp {
-					groups = "nd_df_nowp_grp";
-					function = "nd_df_nowp";
-				};
-			};
-
-			ps_pmx: ps@0 {
-				ps {
-					groups = "ps_grp";
-					function = "ps";
-				};
-			};
-
-			pwc_core_on_pmx: pwc_core_on@0 {
-				pwc_core_on {
-					groups = "pwc_core_on_grp";
-					function = "pwc_core_on";
-				};
-			};
-
-			pwc_ext_on_pmx: pwc_ext_on@0 {
-				pwc_ext_on {
-					groups = "pwc_ext_on_grp";
-					function = "pwc_ext_on";
-				};
-			};
-
-			pwc_gpio3_clk_pmx: pwc_gpio3_clk@0 {
-				pwc_gpio3_clk {
-					groups = "pwc_gpio3_clk_grp";
-					function = "pwc_gpio3_clk";
-				};
-			};
-
-			pwc_io_on_pmx: pwc_io_on@0 {
-				pwc_io_on {
-					groups = "pwc_io_on_grp";
-					function = "pwc_io_on";
-				};
-			};
-
-			pwc_lowbatt_b_pmx0: pwc_lowbatt_b@0 {
-				pwc_lowbatt_b_0 {
-					groups = "pwc_lowbatt_b_grp0";
-					function = "pwc_lowbatt_b_m0";
-				};
-			};
-
-			pwc_mem_on_pmx: pwc_mem_on@0 {
-				pwc_mem_on {
-					groups = "pwc_mem_on_grp";
-					function = "pwc_mem_on";
-				};
-			};
-
-			pwc_on_key_b_pmx0: pwc_on_key_b@0 {
-				pwc_on_key_b_0 {
-					groups = "pwc_on_key_b_grp0";
-					function = "pwc_on_key_b_m0";
-				};
-			};
-
-			pwc_wakeup_src0_pmx: pwc_wakeup_src0@0 {
-				pwc_wakeup_src0 {
-					groups = "pwc_wakeup_src0_grp";
-					function = "pwc_wakeup_src0";
-				};
-			};
-
-			pwc_wakeup_src1_pmx: pwc_wakeup_src1@0 {
-				pwc_wakeup_src1 {
-					groups = "pwc_wakeup_src1_grp";
-					function = "pwc_wakeup_src1";
-				};
-			};
-
-			pwc_wakeup_src2_pmx: pwc_wakeup_src2@0 {
-				pwc_wakeup_src2 {
-					groups = "pwc_wakeup_src2_grp";
-					function = "pwc_wakeup_src2";
-				};
-			};
-
-			pwc_wakeup_src3_pmx: pwc_wakeup_src3@0 {
-				pwc_wakeup_src3 {
-					groups = "pwc_wakeup_src3_grp";
-					function = "pwc_wakeup_src3";
-				};
-			};
-
-			pw_cko0_pmx0: pw_cko0@0 {
-				pw_cko0_0 {
-					groups = "pw_cko0_grp0";
-					function = "pw_cko0_m0";
-				};
-			};
-
-			pw_cko0_pmx1: pw_cko0@1 {
-				pw_cko0_1 {
-					groups = "pw_cko0_grp1";
-					function = "pw_cko0_m1";
-				};
-			};
-
-			pw_cko0_pmx2: pw_cko0@2 {
-				pw_cko0_2 {
-					groups = "pw_cko0_grp2";
-					function = "pw_cko0_m2";
-				};
-			};
-
-			pw_cko1_pmx0: pw_cko1@0 {
-				pw_cko1_0 {
-					groups = "pw_cko1_grp0";
-					function = "pw_cko1_m0";
-				};
-			};
-
-			pw_cko1_pmx1: pw_cko1@1 {
-				pw_cko1_1 {
-					groups = "pw_cko1_grp1";
-					function = "pw_cko1_m1";
-				};
-			};
-
-			pw_i2s01_clk_pmx0: pw_i2s01_clk@0 {
-				pw_i2s01_clk_0 {
-					groups = "pw_i2s01_clk_grp0";
-					function = "pw_i2s01_clk_m0";
-				};
-			};
-
-			pw_i2s01_clk_pmx1: pw_i2s01_clk@1 {
-				pw_i2s01_clk_1 {
-					groups = "pw_i2s01_clk_grp1";
-					function = "pw_i2s01_clk_m1";
-				};
-			};
-
-			pw_pwm0_pmx: pw_pwm0@0 {
-				pw_pwm0 {
-					groups = "pw_pwm0_grp";
-					function = "pw_pwm0";
-				};
-			};
-
-			pw_pwm1_pmx: pw_pwm1@0 {
-				pw_pwm1 {
-					groups = "pw_pwm1_grp";
-					function = "pw_pwm1";
-				};
-			};
-
-			pw_pwm2_pmx0: pw_pwm2@0 {
-				pw_pwm2_0 {
-					groups = "pw_pwm2_grp0";
-					function = "pw_pwm2_m0";
-				};
-			};
-
-			pw_pwm2_pmx1: pw_pwm2@1 {
-				pw_pwm2_1 {
-					groups = "pw_pwm2_grp1";
-					function = "pw_pwm2_m1";
-				};
-			};
-
-			pw_pwm3_pmx0: pw_pwm3@0 {
-				pw_pwm3_0 {
-					groups = "pw_pwm3_grp0";
-					function = "pw_pwm3_m0";
-				};
-			};
-
-			pw_pwm3_pmx1: pw_pwm3@1 {
-				pw_pwm3_1 {
-					groups = "pw_pwm3_grp1";
-					function = "pw_pwm3_m1";
-				};
-			};
-
-			pw_pwm_cpu_vol_pmx0: pw_pwm_cpu_vol@0 {
-				pw_pwm_cpu_vol_0 {
-					groups = "pw_pwm_cpu_vol_grp0";
-					function = "pw_pwm_cpu_vol_m0";
-				};
-			};
-
-			pw_pwm_cpu_vol_pmx1: pw_pwm_cpu_vol@1 {
-				pw_pwm_cpu_vol_1 {
-					groups = "pw_pwm_cpu_vol_grp1";
-					function = "pw_pwm_cpu_vol_m1";
-				};
-			};
-
-			pw_backlight_pmx0: pw_backlight@0 {
-				pw_backlight_0 {
-					groups = "pw_backlight_grp0";
-					function = "pw_backlight_m0";
-				};
-			};
-
-			pw_backlight_pmx1: pw_backlight@1 {
-				pw_backlight_1 {
-					groups = "pw_backlight_grp1";
-					function = "pw_backlight_m1";
-				};
-			};
-
-			rg_eth_mac_pmx: rg_eth_mac@0 {
-				rg_eth_mac {
-					groups = "rg_eth_mac_grp";
-					function = "rg_eth_mac";
-				};
-			};
-
-			rg_gmac_phy_intr_n_pmx: rg_gmac_phy_intr_n@0 {
-				rg_gmac_phy_intr_n {
-					groups = "rg_gmac_phy_intr_n_grp";
-					function = "rg_gmac_phy_intr_n";
-				};
-			};
-
-			rg_rgmii_mac_pmx: rg_rgmii_mac@0 {
-				rg_rgmii_mac {
-					groups = "rg_rgmii_mac_grp";
-					function = "rg_rgmii_mac";
-				};
-			};
-
-			rg_rgmii_phy_ref_clk_pmx0: rg_rgmii_phy_ref_clk@0 {
-				rg_rgmii_phy_ref_clk_0 {
-					groups =
-						"rg_rgmii_phy_ref_clk_grp0";
-					function =
-						"rg_rgmii_phy_ref_clk_m0";
-				};
-			};
-
-			rg_rgmii_phy_ref_clk_pmx1: rg_rgmii_phy_ref_clk@1 {
-				rg_rgmii_phy_ref_clk_1 {
-					groups =
-						"rg_rgmii_phy_ref_clk_grp1";
-					function =
-						"rg_rgmii_phy_ref_clk_m1";
-				};
-			};
-
-			sd0_pmx: sd0@0 {
-				sd0 {
-					groups = "sd0_grp";
-					function = "sd0";
-				};
-			};
-
-			sd0_4bit_pmx: sd0_4bit@0 {
-				sd0_4bit {
-					groups = "sd0_4bit_grp";
-					function = "sd0_4bit";
-				};
-			};
-
-			sd1_pmx: sd1@0 {
-				sd1 {
-					groups = "sd1_grp";
-					function = "sd1";
-				};
-			};
-
-			sd1_4bit_pmx0: sd1_4bit@0 {
-				sd1_4bit_0 {
-					groups = "sd1_4bit_grp0";
-					function = "sd1_4bit_m0";
-				};
-			};
-
-			sd1_4bit_pmx1: sd1_4bit@1 {
-				sd1_4bit_1 {
-					groups = "sd1_4bit_grp1";
-					function = "sd1_4bit_m1";
-				};
-			};
-
-			sd2_pmx0: sd2@0 {
-				sd2_0 {
-					groups = "sd2_grp0";
-					function = "sd2_m0";
-				};
-			};
-
-			sd2_no_cdb_pmx0: sd2_no_cdb@0 {
-				sd2_no_cdb_0 {
-					groups = "sd2_no_cdb_grp0";
-					function = "sd2_no_cdb_m0";
-				};
-			};
-
-			sd3_pmx: sd3@0 {
-				sd3 {
-					groups = "sd3_grp";
-					function = "sd3";
-				};
-			};
-
-			sd5_pmx: sd5@0 {
-				sd5 {
-					groups = "sd5_grp";
-					function = "sd5";
-				};
-			};
-
-			sd6_pmx0: sd6@0 {
-				sd6_0 {
-					groups = "sd6_grp0";
-					function = "sd6_m0";
-				};
-			};
-
-			sd6_pmx1: sd6@1 {
-				sd6_1 {
-					groups = "sd6_grp1";
-					function = "sd6_m1";
-				};
-			};
-
-			sp0_ext_ldo_on_pmx: sp0_ext_ldo_on@0 {
-				sp0_ext_ldo_on {
-					groups = "sp0_ext_ldo_on_grp";
-					function = "sp0_ext_ldo_on";
-				};
-			};
-
-			sp0_qspi_pmx: sp0_qspi@0 {
-				sp0_qspi {
-					groups = "sp0_qspi_grp";
-					function = "sp0_qspi";
-				};
-			};
-
-			sp1_spi_pmx: sp1_spi@0 {
-				sp1_spi {
-					groups = "sp1_spi_grp";
-					function = "sp1_spi";
-				};
-			};
-
-			tpiu_trace_pmx: tpiu_trace@0 {
-				tpiu_trace {
-					groups = "tpiu_trace_grp";
-					function = "tpiu_trace";
-				};
-			};
-
-			uart0_pmx: uart0@0 {
-				uart0 {
-					groups = "uart0_grp";
-					function = "uart0";
-				};
-			};
-
-			uart0_nopause_pmx: uart0_nopause@0 {
-				uart0_nopause {
-					groups = "uart0_nopause_grp";
-					function = "uart0_nopause";
-				};
-			};
-
-			uart1_pmx: uart1@0 {
-				uart1 {
-					groups = "uart1_grp";
-					function = "uart1";
-				};
-			};
-
-			uart2_pmx: uart2@0 {
-				uart2 {
-					groups = "uart2_grp";
-					function = "uart2";
-				};
-			};
-
-			uart3_pmx0: uart3@0 {
-				uart3_0 {
-					groups = "uart3_grp0";
-					function = "uart3_m0";
-				};
-			};
-
-			uart3_pmx1: uart3@1 {
-				uart3_1 {
-					groups = "uart3_grp1";
-					function = "uart3_m1";
-				};
-			};
-
-			uart3_pmx2: uart3@2 {
-				uart3_2 {
-					groups = "uart3_grp2";
-					function = "uart3_m2";
-				};
-			};
-
-			uart3_pmx3: uart3@3 {
-				uart3_3 {
-					groups = "uart3_grp3";
-					function = "uart3_m3";
-				};
-			};
-
-			uart3_nopause_pmx0: uart3_nopause@0 {
-				uart3_nopause_0 {
-					groups = "uart3_nopause_grp0";
-					function = "uart3_nopause_m0";
-				};
-			};
-
-			uart3_nopause_pmx1: uart3_nopause@1 {
-				uart3_nopause_1 {
-					groups = "uart3_nopause_grp1";
-					function = "uart3_nopause_m1";
-				};
-			};
-
-			uart4_pmx0: uart4@0 {
-				uart4_0 {
-					groups = "uart4_grp0";
-					function = "uart4_m0";
-				};
-			};
-
-			uart4_pmx1: uart4@1 {
-				uart4_1 {
-					groups = "uart4_grp1";
-					function = "uart4_m1";
-				};
-			};
-
-			uart4_pmx2: uart4@2 {
-				uart4_2 {
-					groups = "uart4_grp2";
-					function = "uart4_m2";
-				};
-			};
-
-			uart4_nopause_pmx: uart4_nopause@0 {
-				uart4_nopause {
-					groups = "uart4_nopause_grp";
-					function = "uart4_nopause";
-				};
-			};
-
-			usb0_drvvbus_pmx: usb0_drvvbus@0 {
-				usb0_drvvbus {
-					groups = "usb0_drvvbus_grp";
-					function = "usb0_drvvbus";
-				};
-			};
-
-			usb1_drvvbus_pmx: usb1_drvvbus@0 {
-				usb1_drvvbus {
-					groups = "usb1_drvvbus_grp";
-					function = "usb1_drvvbus";
-				};
-			};
-
-			visbus_dout_pmx: visbus_dout@0 {
-				visbus_dout {
-					groups = "visbus_dout_grp";
-					function = "visbus_dout";
-				};
-			};
-
-			vi_vip1_pmx: vi_vip1@0 {
-				vi_vip1 {
-					groups = "vi_vip1_grp";
-					function = "vi_vip1";
-				};
-			};
-
-			vi_vip1_ext_pmx: vi_vip1_ext@0 {
-				vi_vip1_ext {
-					groups = "vi_vip1_ext_grp";
-					function = "vi_vip1_ext";
-				};
-			};
-
-			vi_vip1_low8bit_pmx: vi_vip1_low8bit@0 {
-				vi_vip1_low8bit {
-					groups = "vi_vip1_low8bit_grp";
-					function = "vi_vip1_low8bit";
-				};
-			};
-
-			vi_vip1_high8bit_pmx: vi_vip1_high8bit@0 {
-				vi_vip1_high8bit {
-					groups = "vi_vip1_high8bit_grp";
-					function = "vi_vip1_high8bit";
-				};
-			};
-		};
-
-		pmipc {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13240000 0x13240000 0x00010000>;
-			pmipc@0x13240000 {
-				compatible = "sirf,atlas7-pmipc";
-				reg = <0x13240000 0x00010000>;
-			};
-		};
-
-		dramfw {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10830000 0x10830000 0x18000>;
-			dramfw@10820000 {
-				compatible = "sirf,nocfw-dramfw";
-				reg = <0x10830000 0x18000>;
-			};
-		};
-
-		spramfw {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10250000 0x10250000 0x3000>;
-			spramfw@10820000 {
-				compatible = "sirf,nocfw-spramfw";
-				reg = <0x10250000 0x3000>;
-			};
-		};
-
-		cpum {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10200000 0x10200000 0x3000>;
-			cpum@10200000 {
-				compatible = "sirf,nocfw-cpum";
-				reg = <0x10200000 0x3000>;
-			};
-		};
-
-		cgum {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x18641000 0x18641000 0x3000>,
-					 <0x18620000 0x18620000 0x1000>,
-					<0x18630000 0x18630000 0x10000>;
-
-			cgum@18641000 {
-				compatible = "sirf,nocfw-cgum";
-				reg = <0x18641000 0x3000>;
-			};
-
-			car: clock-controller@18620000 {
-				compatible = "sirf,atlas7-car";
-				reg = <0x18620000 0x1000>;
-				#clock-cells = <1>;
-				#reset-cells = <1>;
-			};
-			pwm: pwm@18630000 {
-				compatible = "sirf,prima2-pwm";
-				#pwm-cells = <2>;
-				reg = <0x18630000 0x10000>;
-				clocks = <&car 138>, <&car 139>, <&car 237>,
-					<&car 240>,  <&car 140>, <&car 246>;
-				clock-names = "pwmc", "sigsrc0", "sigsrc1",
-					"sigsrc2", "sigsrc3", "sigsrc4";
-			};
-		};
-
-		gnssm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x18000000 0x18000000 0x0000ffff>,
-				<0x18010000 0x18010000 0x1000>,
-				<0x18020000 0x18020000 0x1000>,
-				<0x18030000 0x18030000 0x1000>,
-				<0x18040000 0x18040000 0x1000>,
-				<0x18050000 0x18050000 0x1000>,
-				<0x18060000 0x18060000 0x1000>,
-				<0x180b0000 0x180b0000 0x4000>,
-				<0x18100000 0x18100000 0x3000>,
-				<0x18250000 0x18250000 0x10000>,
-				<0x18200000 0x18200000 0x1000>;
-
-			dmac0: dma-controller@18000000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x18000000 0x1000>;
-				interrupts = <0 12 0>;
-				clocks = <&car 89>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-
-			gnssmfw@0x18100000 {
-				compatible = "sirf,nocfw-gnssm";
-				reg = <0x18100000 0x3000>;
-			};
-
-			uart0: uart@18010000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18010000 0x1000>;
-				interrupts = <0 17 0>;
-				clocks = <&car 90>;
-				fifosize = <128>;
-				dmas = <&dmac0 3>, <&dmac0 2>;
-				dma-names = "rx", "tx";
-			};
-
-			uart1: uart@18020000 {
-				cell-index = <1>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18020000 0x1000>;
-				interrupts = <0 18 0>;
-				clocks = <&car 88>;
-				fifosize = <32>;
-			};
-
-			uart2: uart@18030000 {
-				cell-index = <2>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18030000 0x1000>;
-				interrupts = <0 19 0>;
-				clocks = <&car 91>;
-				fifosize = <128>;
-				dmas = <&dmac0 6>, <&dmac0 7>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			uart3: uart@18040000 {
-				cell-index = <3>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18040000 0x1000>;
-				interrupts = <0 66 0>;
-				clocks = <&car 92>;
-				fifosize = <128>;
-				dmas = <&dmac0 4>, <&dmac0 5>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			uart4: uart@18050000 {
-				cell-index = <4>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18050000 0x1000>;
-				interrupts = <0 69 0>;
-				clocks = <&car 93>;
-				fifosize = <128>;
-				dmas = <&dmac0 0>, <&dmac0 1>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			uart5: uart@18060000 {
-				cell-index = <5>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18060000 0x1000>;
-				interrupts = <0 71 0>;
-				clocks = <&car 94>;
-				fifosize = <128>;
-				dmas = <&dmac0 8>, <&dmac0 9>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			gmac: eth@180b0000 {
-				compatible = "snps, dwc-eth-qos";
-				reg = <0x180b0000 0x4000>;
-				interrupts = <0 59 0>, <0 70 0>;
-				interrupt-names = "macirq", "macpmt";
-				clocks = <&car 39>, <&car 45>,
-				       <&car 86>, <&car 87>;
-				clock-names = "gnssm_rgmii", "gnssm_gmac",
-					"rgmii", "gmac";
-				local-mac-address = [00 00 00 00 00 00];
-				phy-mode = "rgmii";
-			};
-			dspub@18250000 {
-				compatible = "dx,cc44p";
-				reg = <0x18250000 0x10000>;
-				interrupts = <0 27 0>;
-			};
-
-			spi1: spi@18200000 {
-				compatible = "sirf,prima2-spi";
-				reg = <0x18200000 0x1000>;
-				interrupts = <0 16 0>;
-				clocks = <&car 95>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				dmas = <&dmac0 12>, <&dmac0 13>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-		};
-
-
-		gpum {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13000000 0x13000000 0x3000>,
-				<0x13010000 0x13010000 0x1400>,
-				<0x13010800 0x13010800 0x100>,
-				<0x13011000 0x13011000 0x100>;
-			gpum@0x13000000 {
-				compatible = "sirf,nocfw-gpum";
-				reg = <0x13000000 0x3000>;
-			};
-			dmacsdrr: dma-controller@13010800 {
-				cell-index = <5>;
-				compatible = "sirf,atlas7-dmac-v2";
-				reg = <0x13010800 0x100>;
-				interrupts = <0 8 0>;
-				clocks = <&car 127>;
-				#dma-cells = <1>;
-				#dma-channels = <1>;
-			};
-			dmacsdrw: dma-controller@13011000 {
-				cell-index = <6>;
-				compatible = "sirf,atlas7-dmac-v2";
-				reg = <0x13011000 0x100>;
-				interrupts = <0 9 0>;
-				clocks = <&car 127>;
-				#dma-cells = <1>;
-				#dma-channels = <1>;
-			};
-			sdr@0x13010000 {
-				compatible = "sirf,atlas7-sdr";
-				reg = <0x13010000 0x1400>;
-				interrupts = <0 7 0>,
-					   <0 8 0>,
-					   <0 9 0>;
-				clocks = <&car 127>;
-				dmas = <&dmacsdrr 0>, <&dmacsdrw 0>;
-				dma-names = "tx", "rx";
-			};
-		};
-
-		mediam {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x15000000 0x15000000 0x00600000>,
-				<0x16000000 0x16000000 0x00200000>,
-				<0x17000000 0x17000000 0x10000>,
-				<0x17020000 0x17020000 0x1000>,
-				<0x17030000 0x17030000 0x1000>,
-				<0x17040000 0x17040000 0x1000>,
-				<0x17050000 0x17050000 0x10000>,
-				<0x17060000 0x17060000 0x200>,
-				<0x17060200 0x17060200 0x100>,
-				<0x17070000 0x17070000 0x200>,
-				<0x17070200 0x17070200 0x100>,
-				<0x170A0000 0x170A0000 0x3000>;
-
-			multimedia@15000000 {
-				compatible = "sirf,atlas7-video-codec";
-				reg = <0x15000000 0x10000>;
-				interrupts = <0 5 0>;
-				clocks = <&car 102>;
-			};
-
-			mediam@170A0000 {
-				compatible = "sirf,nocfw-mediam";
-				reg = <0x170A0000 0x3000>;
-			};
-
-			gpio_0: gpio_mediam@17040000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas7-gpio";
-				reg = <0x17040000 0x1000>;
-				interrupts = <0 13 0>, <0 14 0>;
-				clocks = <&car 107>;
-				clock-names = "gpio0_io";
-				gpio-controller;
-				interrupt-controller;
-
-				gpio-banks = <2>;
-				gpio-ranges = <&pinctrl 0 0 0>,
-						<&pinctrl 32 0 0>;
-				gpio-ranges-group-names = "lvds_gpio_grp",
-							"uart_nand_gpio_grp";
-			};
-
-			nand@17050000 {
-				compatible = "sirf,atlas7-nand";
-				reg = <0x17050000 0x10000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&nd_df_pmx>;
-				interrupts = <0 41 0>;
-				clocks = <&car 108>, <&car 112>;
-				clock-names = "nand_io", "nand_nand";
-			};
-
-			sd0: sdhci@16000000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x16000000 0x100000>;
-				interrupts = <0 38 0>;
-				clocks = <&car 109>, <&car 111>;
-				clock-names = "core", "iface";
-				wp-inverted;
-				non-removable;
-				status = "disabled";
-				bus-width = <8>;
-			};
-
-			sd1: sdhci@16100000 {
-				cell-index = <1>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x16100000 0x100000>;
-				interrupts = <0 38 0>;
-				clocks = <&car 109>, <&car 111>;
-				clock-names = "core", "iface";
-				non-removable;
-				status = "disabled";
-				bus-width = <8>;
-			};
-
-			jpeg@17000000 {
-				compatible = "sirf,atlas7-jpeg";
-				reg = <0x17000000 0x10000>;
-				interrupts = <0 72 0>,
-					<0 73 0>;
-				clocks = <&car 103>;
-			};
-
-			usb0: usb@17060000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-usb";
-				reg = <0x17060000 0x200>;
-				interrupts = <0 10 0>;
-				clocks = <&car 113>;
-				sirf,usbphy = <&usbphy0>;
-				phy_type = "utmi";
-				dr_mode = "otg";
-				maximum-speed = "high-speed";
-				status = "okay";
-			};
-
-			usb1: usb@17070000 {
-				cell-index = <1>;
-				compatible = "sirf,atlas7-usb";
-				reg = <0x17070000 0x200>;
-				interrupts = <0 11 0>;
-				clocks = <&car 114>;
-				sirf,usbphy = <&usbphy1>;
-				phy_type = "utmi";
-				dr_mode = "host";
-				maximum-speed = "high-speed";
-				status = "okay";
-			};
-
-			usbphy0: usbphy@0 {
-				compatible = "sirf,atlas7-usbphy";
-				reg = <0x17060200 0x100>;
-				clocks = <&car 115>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@1 {
-				compatible = "sirf,atlas7-usbphy";
-				reg = <0x17070200 0x100>;
-				clocks = <&car 116>;
-				status = "okay";
-			};
-
-			i2c0: i2c@17020000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0x17020000 0x1000>;
-				interrupts = <0 24 0>;
-				clocks = <&car 105>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-		};
-
-		vdifm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13290000 0x13290000 0x3000>,
-				<0x13300000 0x13300000 0x1000>,
-				<0x14200000 0x14200000 0x600000>;
-
-			vdifm@13290000 {
-				compatible = "sirf,nocfw-vdifm";
-				reg = <0x13290000 0x3000>;
-			};
-
-			gpio_1: gpio_vdifm@13300000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas7-gpio";
-				reg = <0x13300000 0x1000>;
-				interrupts = <0 43 0>, <0 44 0>,
-						<0 45 0>, <0 46 0>;
-				clocks = <&car 84>;
-				clock-names = "gpio1_io";
-				gpio-controller;
-				interrupt-controller;
-
-				gpio-banks = <4>;
-				gpio-ranges = <&pinctrl 0 0 0>,
-						<&pinctrl 32 0 0>,
-						<&pinctrl 64 0 0>,
-						<&pinctrl 96 0 0>;
-				gpio-ranges-group-names = "gnss_gpio_grp",
-							"lcd_vip_gpio_grp",
-							"sdio_i2s_gpio_grp",
-							"sp_rgmii_gpio_grp";
-			};
-
-			sd2: sdhci@14200000 {
-				cell-index = <2>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14200000 0x100000>;
-				interrupts = <0 23 0>;
-				clocks = <&car 70>, <&car 75>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-				sd-uhs-sdr50;
-				vqmmc-supply = <&vqmmc>;
-				vqmmc: vqmmc@2 {
-					regulator-min-microvolt = <1650000>;
-					regulator-max-microvolt = <1950000>;
-					regulator-name = "vqmmc-ldo";
-					regulator-type = "voltage";
-					regulator-boot-on;
-					regulator-allow-bypass;
-				};
-			};
-
-			sd3: sdhci@14300000 {
-				cell-index = <3>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14300000 0x100000>;
-				interrupts = <0 23 0>;
-				clocks = <&car 76>, <&car 81>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-			};
-
-			sd5: sdhci@14500000 {
-				cell-index = <5>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14500000 0x100000>;
-				interrupts = <0 39 0>;
-				clocks = <&car 71>, <&car 76>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-				loop-dma;
-			};
-
-			sd6: sdhci@14600000 {
-				cell-index = <6>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14600000 0x100000>;
-				interrupts = <0 98 0>;
-				clocks = <&car 72>, <&car 77>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-			};
-
-			sd7: sdhci@14700000 {
-				cell-index = <7>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14700000 0x100000>;
-				interrupts = <0 98 0>;
-				clocks = <&car 72>, <&car 77>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-			};
-		};
-
-		audiom {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10d50000 0x10d50000 0x0000ffff>,
-					<0x10d60000 0x10d60000 0x0000ffff>,
-					<0x10d80000 0x10d80000 0x0000ffff>,
-					<0x10d90000 0x10d90000 0x0000ffff>,
-					<0x10ED0000 0x10ED0000 0x3000>,
-					<0x10dc8000 0x10dc8000 0x1000>,
-					<0x10dc0000 0x10dc0000 0x1000>,
-					<0x10db0000 0x10db0000 0x4000>,
-					<0x10d40000 0x10d40000 0x1000>,
-					<0x10d30000 0x10d30000 0x1000>;
-
-			timer@10dc0000 {
-				compatible = "sirf,atlas7-tick";
-				reg = <0x10dc0000 0x1000>;
-				interrupts = <0 0 0>,
-					   <0 1 0>,
-					   <0 2 0>,
-					   <0 49 0>,
-					   <0 50 0>,
-					   <0 51 0>;
-				clocks = <&car 47>;
-			};
-
-			timerb@10dc8000 {
-					compatible = "sirf,atlas7-tick";
-					reg = <0x10dc8000 0x1000>;
-					interrupts = <0 74 0>,
-							   <0 75 0>,
-							   <0 76 0>,
-							   <0 77 0>,
-							   <0 78 0>,
-							   <0 79 0>;
-					clocks = <&car 47>;
-			};
-
-			vip0@10db0000 {
-				compatible = "sirf,atlas7-vip0";
-				reg = <0x10db0000 0x2000>;
-				interrupts = <0 85 0>;
-				sirf,vip_cma_size = <0xC00000>;
-			};
-
-			cvd@10db2000 {
-				compatible = "sirf,cvd";
-				reg = <0x10db2000 0x2000>;
-				clocks = <&car 46>;
-			};
-
-			dmac2: dma-controller@10d50000 {
-				cell-index = <2>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x10d50000 0xffff>;
-				interrupts = <0 55 0>;
-				clocks = <&car 60>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-
-			dmac3: dma-controller@10d60000 {
-				cell-index = <3>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x10d60000 0xffff>;
-				interrupts = <0 56 0>;
-				clocks = <&car 61>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-
-			adc: adc@10d80000 {
-				compatible = "sirf,atlas7-adc";
-				reg = <0x10d80000 0xffff>;
-				interrupts = <0 34 0>;
-				clocks = <&car 49>;
-				#io-channel-cells = <1>;
-			};
-
-			pulsec@10d90000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0x10d90000 0xffff>;
-				interrupts = <0 42 0>;
-				clocks = <&car 54>;
-			};
-
-			audiom@10ED0000 {
-				compatible = "sirf,nocfw-audiom";
-				reg = <0x10ED0000 0x3000>;
-				interrupts = <0 102 0>;
-			};
-
-			usp1: usp@10d30000 {
-				cell-index = <1>;
-				reg = <0x10d30000 0x1000>;
-				fifosize = <512>;
-				clocks = <&car 58>;
-				dmas = <&dmac2 6>, <&dmac2 7>;
-				dma-names = "rx", "tx";
-			};
-
-			usp2: usp@10d40000 {
-				cell-index = <2>;
-				reg = <0x10d40000 0x1000>;
-				interrupts = <0 22 0>;
-				clocks = <&car 59>;
-				dmas = <&dmac2 12>, <&dmac2 13>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		ddrm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10820000 0x10820000 0x3000>,
-					<0x10800000 0x10800000 0x2000>;
-			ddrm@10820000 {
-				compatible = "sirf,nocfw-ddrm";
-				reg = <0x10820000 0x3000>;
-				interrupts = <0 105 0>;
-			};
-
-			memory-controller@0x10800000 {
-				compatible = "sirf,atlas7-memc";
-				reg = <0x10800000 0x2000>;
-			};
-
-		};
-
-		btm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x11002000 0x11002000 0x0000ffff>,
-			       <0x11010000 0x11010000 0x3000>,
-			       <0x11000000 0x11000000 0x1000>,
-			       <0x11001000 0x11001000 0x1000>;
-
-			dmac4: dma-controller@11002000 {
-				cell-index = <4>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x11002000 0x1000>;
-				interrupts = <0 99 0>;
-				clocks = <&car 130>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-			uart6: uart@11000000 {
-				cell-index = <6>;
-				compatible = "sirf,atlas7-bt-uart",
-						"sirf,atlas7-uart";
-				reg = <0x11000000 0x1000>;
-				interrupts = <0 100 0>;
-				clocks = <&car 131>, <&car 133>, <&car 134>;
-				clock-names = "uart", "general", "noc";
-				fifosize = <128>;
-				dmas = <&dmac4 12>, <&dmac4 13>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			usp3: usp@11001000 {
-				compatible = "sirf,atlas7-bt-usp",
-					   "sirf,prima2-usp-pcm";
-				cell-index = <3>;
-				reg = <0x11001000 0x1000>;
-				fifosize = <512>;
-				clocks = <&car 132>, <&car 129>, <&car 133>,
-					<&car 134>, <&car 135>;
-				clock-names = "usp3_io", "a7ca_btss", "a7ca_io",
-					"noc_btm_io", "thbtm_io";
-				dmas = <&dmac4 0>, <&dmac4 1>;
-				dma-names = "rx", "tx";
-			};
-
-			btm@11010000 {
-				compatible = "sirf,nocfw-btm";
-				reg = <0x11010000 0x3000>;
-			};
-		};
-
-		rtcm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x18810000 0x18810000 0x3000>,
-				<0x18840000 0x18840000 0x1000>,
-				<0x18890000 0x18890000 0x1000>,
-				<0x188B0000 0x188B0000 0x10000>,
-				<0x188D0000 0x188D0000 0x1000>;
-			rtcm@18810000 {
-				compatible = "sirf,nocfw-rtcm";
-				reg = <0x18810000 0x3000>;
-				interrupts = <0 109 0>;
-			};
-
-			gpio_2: gpio_rtcm@18890000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas7-gpio";
-				reg = <0x18890000 0x1000>;
-				interrupts = <0 47 0>;
-				gpio-controller;
-				interrupt-controller;
-
-				gpio-banks = <1>;
-				gpio-ranges = <&pinctrl 0 0 0>;
-				gpio-ranges-group-names = "rtc_gpio_grp";
-			};
-
-			rtc-iobg@18840000 {
-				compatible = "sirf,prima2-rtciobg",
-					"sirf-prima2-rtciobg-bus",
-					"simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x18840000 0x1000>;
-
-				sysrtc@2000 {
-					compatible = "sirf,prima2-sysrtc";
-					reg = <0x2000 0x100>;
-					interrupts = <0 52 0>;
-				};
-				pwrc@3000 {
-					compatible = "sirf,atlas7-pwrc";
-					reg = <0x3000 0x100>;
-				};
-			};
-
-			qspi: flash@188B0000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-qspi-nor";
-				reg = <0x188B0000 0x10000>;
-				interrupts = <0 15 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			retain@0x188D0000 {
-				compatible = "sirf,atlas7-retain";
-				reg = <0x188D0000 0x1000>;
-			};
-
-		};
-		disp-iobg {
-			/* lcdc0 */
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13100000 0x13100000 0x20000>,
-				<0x10e10000 0x10e10000 0x10000>,
-				<0x17010000 0x17010000 0x10000>;
-
-			lcd@13100000 {
-				compatible = "sirf,atlas7-lcdc";
-				reg = <0x13100000 0x10000>;
-				interrupts = <0 30 0>;
-				clocks = <&car 79>;
-			};
-			vpp@13110000 {
-				compatible = "sirf,atlas7-vpp";
-				reg = <0x13110000 0x10000>;
-				interrupts = <0 31 0>;
-				clocks = <&car 78>;
-				resets = <&car 29>;
-			};
-			lvds@10e10000 {
-				compatible = "sirf,atlas7-lvdsc";
-				reg = <0x10e10000 0x10000>;
-				interrupts = <0 64 0>;
-				clocks = <&car 54>;
-				resets = <&car 29>;
-			};
-			g2d@17010000 {
-				compatible = "sirf, atlas7-g2d";
-				reg = <0x17010000 0x10000>;
-				interrupts = <0 61 0>;
-				clocks = <&car 104>;
-			};
-
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x12000000 0x12000000 0x1000000>;
-
-			graphics@12000000 {
-				compatible = "powervr,sgx531";
-				reg = <0x12000000 0x1000000>;
-				interrupts = <0 6 0>;
-				clocks = <&car 126>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/axis/Makefile b/arch/arm/boot/dts/axis/Makefile
new file mode 100644
index 000000000000..2cab41451281
--- /dev/null
+++ b/arch/arm/boot/dts/axis/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/axis/artpec6-devboard.dts
index d20d95359b28..042a9cc920c6 100644
--- a/arch/arm/boot/dts/artpec6-devboard.dts
+++ b/arch/arm/boot/dts/axis/artpec6-devboard.dts
@@ -1,10 +1,5 @@
-/*
- * Axis ARTPEC-6 development board.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Axis ARTPEC-6 development board.
 
 /dts-v1/;
 #include "artpec6.dtsi"
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi
index 037157e6c5ee..037157e6c5ee 100644
--- a/arch/arm/boot/dts/artpec6.dtsi
+++ b/arch/arm/boot/dts/axis/artpec6.dtsi
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
deleted file mode 100644
index be468f4adc37..000000000000
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm21664.dtsi"
-
-/ {
-	model = "BCM21664 Garnet board";
-	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	sdio1: sdio@3f180000 {
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
deleted file mode 100644
index 3cf66faf3b56..000000000000
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-#include "dt-bindings/clock/bcm21664.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "BCM21664 SoC";
-	compatible = "brcm,bcm21664";
-	interrupt-parent = <&gic>;
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-	};
-
-       cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			enable-method = "brcm,bcm11351-cpu-method";
-			secondary-boot-reg = <0x35004178>;
-			reg = <1>;
-		};
-	};
-
-	gic: interrupt-controller@3ff00100 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x3ff01000 0x1000>,
-		      <0x3ff00100 0x100>;
-	};
-
-	smc@3404e000 {
-		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
-		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
-	};
-
-	uart@3e000000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e000000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e001000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e001000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	uart@3e002000 {
-		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
-		reg = <0x3e002000 0x118>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
-
-	L2: l2-cache@3ff20000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x3ff20000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
-
-	brcm,resetmgr@35001f00 {
-		compatible = "brcm,bcm21664-resetmgr";
-		reg = <0x35001f00 0x24>;
-	};
-
-	timer@35006000 {
-		compatible = "brcm,kona-timer";
-		reg = <0x35006000 0x1c>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-	};
-
-	gpio: gpio@35003000 {
-		compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
-		reg = <0x35003000 0x524>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-	};
-
-	sdio1: sdio@3f180000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f180000 0x801c>;
-		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-		status = "disabled";
-	};
-
-	sdio2: sdio@3f190000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f190000 0x801c>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-		status = "disabled";
-	};
-
-	sdio3: sdio@3f1a0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1a0000 0x801c>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-		status = "disabled";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		compatible = "brcm,kona-sdhci";
-		reg = <0x3f1b0000 0x801c>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-		status = "disabled";
-	};
-
-	i2c@3e016000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e016000 0x70>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-		status = "disabled";
-	};
-
-	i2c@3e017000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e017000 0x70>;
-		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-		status = "disabled";
-	};
-
-	i2c@3e018000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e018000 0x70>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-		status = "disabled";
-	};
-
-	i2c@3e01c000 {
-		compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
-		reg = <0x3e01c000 0x70>;
-		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-		status = "disabled";
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu@35001000 {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu@35002000 {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		master_ccu: master_ccu@3f001000 {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-
-		slave_ccu: slave_ccu@3e011000 {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-	};
-
-	usbotg: usb@3f120000 {
-		compatible = "snps,dwc2";
-		reg = <0x3f120000 0x10000>;
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&usb_otg_ahb_clk>;
-		clock-names = "otg";
-		phys = <&usbphy>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		compatible = "brcm,kona-usb2-phy";
-		reg = <0x3f130000 0x28>;
-		#phy-cells = <0>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
deleted file mode 100644
index a36c9b1d23c8..000000000000
--- a/arch/arm/boot/dts/bcm23550.dtsi
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- *  BSD LICENSE
- *
- *  Copyright(c) 2016 Broadcom.  All rights reserved.
- *
- *  Redistribution and use in source and binary forms, with or without
- *  modification, are permitted provided that the following conditions
- *  are met:
- *
- *    * Redistributions of source code must retain the above copyright
- *      notice, this list of conditions and the following disclaimer.
- *    * Redistributions in binary form must reproduce the above copyright
- *      notice, this list of conditions and the following disclaimer in
- *      the documentation and/or other materials provided with the
- *      distribution.
- *    * Neither the name of Broadcom Corporation nor the names of its
- *      contributors may be used to endorse or promote products derived
- *      from this software without specific prior written permission.
- *
- *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/* BCM23550 and BCM21664 have almost identical clocks */
-#include "dt-bindings/clock/bcm21664.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "BCM23550 SoC";
-	compatible = "brcm,bcm23550";
-	interrupt-parent = <&gic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <1>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <2>;
-			clock-frequency = <1000000000>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			enable-method = "brcm,bcm23550";
-			secondary-boot-reg = <0x35004178>;
-			reg = <3>;
-			clock-frequency = <1000000000>;
-		};
-	};
-
-	/* Hub bus */
-	hub@34000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x34000000 0x102f83ac>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		smc@4e000 {
-			compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
-			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
-		};
-
-		resetmgr: reset-controller@1001f00 {
-			compatible = "brcm,bcm21664-resetmgr";
-			reg = <0x01001f00 0x24>;
-		};
-
-		gpio: gpio@1003000 {
-			compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
-			reg = <0x01003000 0x524>;
-			interrupts =
-			       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-				GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-		};
-
-		timer@1006000 {
-			compatible = "brcm,kona-timer";
-			reg = <0x01006000 0x1c>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
-		};
-	};
-
-	/* Slaves bus */
-	slaves@3e000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x3e000000 0x0001c070>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uartb: serial@0 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00000000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uartb2: serial@1000 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00001000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
-			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		uartb3: serial@2000 {
-			compatible = "snps,dw-apb-uart";
-			status = "disabled";
-			reg = <0x00002000 0x118>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-		};
-
-		bsc1: i2c@16000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00016000 0x70>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
-			status = "disabled";
-		};
-
-		bsc2: i2c@17000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00017000 0x70>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
-			status = "disabled";
-		};
-
-		bsc3: i2c@18000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x00018000 0x70>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
-			status = "disabled";
-		};
-
-		bsc4: i2c@1c000 {
-			compatible = "brcm,kona-i2c";
-			reg = <0x0001c000 0x70>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
-			status = "disabled";
-		};
-	};
-
-	/* Apps bus */
-	apps@3e300000 {
-		compatible = "simple-bus";
-		ranges = <0 0x3e300000 0x01b77000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		usbotg: usb@e20000 {
-			compatible = "snps,dwc2";
-			reg = <0x00e20000 0x10000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&usb_otg_ahb_clk>;
-			clock-names = "otg";
-			phys = <&usbphy>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		usbphy: usb-phy@e30000 {
-			compatible = "brcm,kona-usb2-phy";
-			reg = <0x00e30000 0x28>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		sdio1: sdio@e80000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00e80000 0x801c>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
-			status = "disabled";
-		};
-
-		sdio2: sdio@e90000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00e90000 0x801c>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
-			status = "disabled";
-		};
-
-		sdio3: sdio@ea0000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00ea0000 0x801c>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
-			status = "disabled";
-		};
-
-		sdio4: sdio@eb0000 {
-			compatible = "brcm,kona-sdhci";
-			reg = <0x00eb0000 0x801c>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
-			status = "disabled";
-		};
-
-		cdc: cdc@1b0e000 {
-			compatible = "brcm,bcm23550-cdc";
-			reg = <0x01b0e000 0x78>;
-		};
-
-		gic: interrupt-controller@1b21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x01b21000 0x1000>,
-			      <0x01b22000 0x1000>;
-		};
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * Fixed clocks are defined before CCUs whose
-		 * clocks may depend on them.
-		 */
-
-		ref_32k_clk: ref_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		bbl_32k_clk: bbl_32k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-
-		ref_13m_clk: ref_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		var_13m_clk: var_13m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <13000000>;
-		};
-
-		dft_19_5m_clk: dft_19_5m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <19500000>;
-		};
-
-		ref_crystal_clk: ref_crystal {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-
-		ref_52m_clk: ref_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		var_52m_clk: var_52m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		usb_otg_ahb_clk: usb_otg_ahb {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <52000000>;
-		};
-
-		ref_96m_clk: ref_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		var_96m_clk: var_96m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <96000000>;
-		};
-
-		ref_104m_clk: ref_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		var_104m_clk: var_104m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104000000>;
-		};
-
-		ref_156m_clk: ref_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		var_156m_clk: var_156m {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <156000000>;
-		};
-
-		root_ccu: root_ccu@35001000 {
-			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
-			reg = <0x35001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "frac_1m";
-		};
-
-		aon_ccu: aon_ccu@35002000 {
-			compatible = BCM21664_DT_AON_CCU_COMPAT;
-			reg = <0x35002000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "hub_timer";
-		};
-
-		slave_ccu: slave_ccu@3e011000 {
-			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
-			reg = <0x3e011000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "uartb",
-					     "uartb2",
-					     "uartb3",
-					     "bsc1",
-					     "bsc2",
-					     "bsc3",
-					     "bsc4";
-		};
-
-		master_ccu: master_ccu@3f001000 {
-			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
-			reg = <0x3f001000 0x0f00>;
-			#clock-cells = <1>;
-			clock-output-names = "sdio1",
-					     "sdio2",
-					     "sdio3",
-					     "sdio4",
-					     "sdio1_sleep",
-					     "sdio2_sleep",
-					     "sdio3_sleep",
-					     "sdio4_sleep";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
deleted file mode 100644
index ead6e9804dbf..000000000000
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-
-#include "bcm11351.dtsi"
-
-/ {
-	model = "BCM28155 AP board";
-	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
-	};
-
-	uart@3e000000 {
-		status = "okay";
-	};
-
-	i2c@3e016000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e017000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3e018000 {
-		status="okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@3500d000 {
-		status="okay";
-		clock-frequency = <100000>;
-
-		pmu: pmu@8 {
-			reg = <0x08>;
-		};
-	};
-
-	sdio2: sdio@3f190000 {
-		non-removable;
-		max-frequency = <48000000>;
-		vmmc-supply = <&camldo1_reg>;
-		vqmmc-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	sdio4: sdio@3f1b0000 {
-		max-frequency = <48000000>;
-		cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-		vmmc-supply = <&sdldo_reg>;
-		vqmmc-supply = <&sdxldo_reg>;
-		status = "okay";
-	};
-
-	pwm: pwm@3e01a000 {
-		status = "okay";
-	};
-
-	usbotg: usb@3f120000 {
-		vusb_d-supply = <&usbldo_reg>;
-		vusb_a-supply = <&iosr1_reg>;
-		status = "okay";
-	};
-
-	usbphy: usb-phy@3f130000 {
-		status = "okay";
-	};
-};
-
-#include "bcm59056.dtsi"
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-	regulators {
-		camldo1_reg: camldo1 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdldo_reg: sdldo {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		sdxldo_reg: sdxldo {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		usbldo_reg: usbldo {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		iosr1_reg: iosr1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
deleted file mode 100644
index 2b69957e0113..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-smsc9512.dtsi"
-#include "bcm283x-rpi-usb-host.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-b", "brcm,bcm2835";
-	model = "Raspberry Pi Model B";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x10000000>;
-	};
-
-	leds {
-		act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gpio {
-	/*
-	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
-	 * RPI00021 sheet 02
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "SDA0",
-			  "SCL0",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "CAM_GPIO1",
-			  "LAN_RUN",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "STATUS_LED_N",
-			  "GPIO17",
-			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "NC", /* GPIO26 */
-			  "CAM_GPIO0",
-			  /* Binary number representing build/revision */
-			  "CONFIG0",
-			  "CONFIG1",
-			  "CONFIG2",
-			  "CONFIG3",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
-			  "PWM1_OUT",
-			  "HDMI_HPD_P",
-			  "SD_CARD_DET",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0>;
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
-	status = "okay";
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
deleted file mode 100644
index 09a088f98566..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
- */
-
-/dts-v1/;
-#include "bcm2835.dtsi"
-#include "bcm2835-rpi.dtsi"
-#include "bcm283x-rpi-usb-otg.dtsi"
-
-/ {
-	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
-	model = "Raspberry Pi Zero W";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0 0x20000000>;
-	};
-
-	chosen {
-		/* 8250 auxiliary UART instead of pl011 */
-		stdout-path = "serial1:115200n8";
-	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&gpio {
-	/*
-	 * This is based on the official GPU firmware DT blob.
-	 *
-	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
-	 * "FOO" = GPIO line named "FOO" on the schematic
-	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
-	 */
-	gpio-line-names = "ID_SDA",
-			  "ID_SCL",
-			  "SDA1",
-			  "SCL1",
-			  "GPIO_GCLK",
-			  "GPIO5",
-			  "GPIO6",
-			  "SPI_CE1_N",
-			  "SPI_CE0_N",
-			  "SPI_MISO",
-			  "SPI_MOSI",
-			  "SPI_SCLK",
-			  "GPIO12",
-			  "GPIO13",
-			  /* Serial port */
-			  "TXD0",
-			  "RXD0",
-			  "GPIO16",
-			  "GPIO17",
-			  "GPIO18",
-			  "GPIO19",
-			  "GPIO20",
-			  "GPIO21",
-			  "GPIO22",
-			  "GPIO23",
-			  "GPIO24",
-			  "GPIO25",
-			  "GPIO26",
-			  "GPIO27",
-			  "SDA0",
-			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "CAM_GPIO1", /* GPIO40 */
-			  "WL_ON", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "WIFI_CLK", /* GPIO43 */
-			  "CAM_GPIO0", /* GPIO44 */
-			  "BT_ON", /* GPIO45 */
-			  "HDMI_HPD_N",
-			  "STATUS_LED_N",
-			  /* Used by SD Card */
-			  "SD_CLK_R",
-			  "SD_CMD_R",
-			  "SD_DATA0_R",
-			  "SD_DATA1_R",
-			  "SD_DATA2_R",
-			  "SD_DATA3_R";
-
-	pinctrl-0 = <&gpioout &alt0>;
-};
-
-&hdmi {
-	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-	status = "okay";
-};
-
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	non-removable;
-	status = "okay";
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&sdhost {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhost_gpio48>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_gpio14>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
deleted file mode 100644
index 6c6a7f620d8b..000000000000
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ /dev/null
@@ -1,81 +0,0 @@
-#include <dt-bindings/power/raspberrypi-power.h>
-
-/ {
-	leds {
-		compatible = "gpio-leds";
-
-		act {
-			label = "ACT";
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	soc {
-		firmware: firmware {
-			compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
-			mboxes = <&mailbox>;
-		};
-
-		power: power {
-			compatible = "raspberrypi,bcm2835-power";
-			firmware = <&firmware>;
-			#power-domain-cells = <1>;
-		};
-
-		vchiq: mailbox@7e00b840 {
-			compatible = "brcm,bcm2835-vchiq";
-			reg = <0x7e00b840 0x3c>;
-			interrupts = <0 2>;
-		};
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-
-	gpioout: gpioout {
-		brcm,pins = <6>;
-		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
-	};
-
-	alt0: alt0 {
-		brcm,pins = <4 5 7 8 9 10 11>;
-		brcm,function = <BCM2835_FSEL_ALT0>;
-	};
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_gpio0>;
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_gpio2>;
-	status = "okay";
-	clock-frequency = <100000>;
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&usb {
-	power-domains = <&power RPI_POWER_DOMAIN_USB>;
-};
-
-&vec {
-	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
-	status = "okay";
-};
-
-&dsi0 {
-	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
-};
-
-&dsi1 {
-	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
deleted file mode 100644
index a5c3824c8056..000000000000
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm283x.dtsi"
-
-/ {
-	compatible = "brcm,bcm2835";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm1176jzf-s";
-			reg = <0x0>;
-		};
-	};
-
-	soc {
-		ranges = <0x7e000000 0x20000000 0x02000000>;
-		dma-ranges = <0x40000000 0x00000000 0x20000000>;
-	};
-
-	arm-pmu {
-		compatible = "arm,arm1176-pmu";
-	};
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	407000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2835-thermal";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
deleted file mode 100644
index c933e8413884..000000000000
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "bcm283x.dtsi"
-
-/ {
-	compatible = "brcm,bcm2836";
-
-	soc {
-		ranges = <0x7e000000 0x3f000000 0x1000000>,
-			 <0x40000000 0x40000000 0x00001000>;
-		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
-
-		local_intc: local_intc@40000000 {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&local_intc>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupt-parent = <&local_intc>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&local_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
-			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
-			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
-			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
-		always-on;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm2836-smp";
-
-		v7_cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf00>;
-			clock-frequency = <800000000>;
-		};
-
-		v7_cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf01>;
-			clock-frequency = <800000000>;
-		};
-
-		v7_cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf02>;
-			clock-frequency = <800000000>;
-		};
-
-		v7_cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0xf03>;
-			clock-frequency = <800000000>;
-		};
-	};
-};
-
-/* Make the BCM2835-style global interrupt controller be a child of the
- * CPU-local interrupt controller.
- */
-&intc {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-parent = <&local_intc>;
-	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	407000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2836-thermal";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
deleted file mode 100644
index beb6c502dadc..000000000000
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ /dev/null
@@ -1,93 +0,0 @@
-#include "bcm283x.dtsi"
-
-/ {
-	compatible = "brcm,bcm2837";
-
-	soc {
-		ranges = <0x7e000000 0x3f000000 0x1000000>,
-			 <0x40000000 0x40000000 0x00001000>;
-		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
-
-		local_intc: local_intc@40000000 {
-			compatible = "brcm,bcm2836-l1-intc";
-			reg = <0x40000000 0x100>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&local_intc>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupt-parent = <&local_intc>;
-		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupt-parent = <&local_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
-			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
-			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
-			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
-		always-on;
-	};
-
-	cpus: cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000d8>;
-		};
-
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e0>;
-		};
-
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000e8>;
-		};
-
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x000000f0>;
-		};
-	};
-};
-
-/* Make the BCM2835-style global interrupt controller be a child of the
- * CPU-local interrupt controller.
- */
-&intc {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-parent = <&local_intc>;
-	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&cpu_thermal {
-	coefficients = <(-538)	412000>;
-};
-
-/* enable thermal sensor with the correct compatible property set */
-&thermal {
-	compatible = "brcm,bcm2837-thermal";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
deleted file mode 100644
index 2d191fcbc2cc..000000000000
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ /dev/null
@@ -1,679 +0,0 @@
-#include <dt-bindings/pinctrl/bcm2835.h>
-#include <dt-bindings/clock/bcm2835.h>
-#include <dt-bindings/clock/bcm2835-aux.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/soc/bcm2835-pm.h>
-
-/* firmware-provided startup stubs live here, where the secondary CPUs are
- * spinning.
- */
-/memreserve/ 0x00000000 0x00001000;
-
-/* This include file covers the common peripherals and configuration between
- * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
- * bcm2835.dtsi and bcm2836.dtsi.
- */
-
-/ {
-	compatible = "brcm,bcm2835";
-	model = "BCM2835";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature	= <80000>;
-					hysteresis	= <0>;
-					type		= "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-
-	soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		timer@7e003000 {
-			compatible = "brcm,bcm2835-system-timer";
-			reg = <0x7e003000 0x1000>;
-			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-			/* This could be a reference to BCM2835_CLOCK_TIMER,
-			 * but we don't have the driver using the common clock
-			 * support yet.
-			 */
-			clock-frequency = <1000000>;
-		};
-
-		txp@7e004000 {
-			compatible = "brcm,bcm2835-txp";
-			reg = <0x7e004000 0x20>;
-			interrupts = <1 11>;
-		};
-
-		dma: dma@7e007000 {
-			compatible = "brcm,bcm2835-dma";
-			reg = <0x7e007000 0xf00>;
-			interrupts = <1 16>,
-				     <1 17>,
-				     <1 18>,
-				     <1 19>,
-				     <1 20>,
-				     <1 21>,
-				     <1 22>,
-				     <1 23>,
-				     <1 24>,
-				     <1 25>,
-				     <1 26>,
-				     /* dma channel 11-14 share one irq */
-				     <1 27>,
-				     <1 27>,
-				     <1 27>,
-				     <1 27>,
-				     /* unused shared irq for all channels */
-				     <1 28>;
-			interrupt-names = "dma0",
-					  "dma1",
-					  "dma2",
-					  "dma3",
-					  "dma4",
-					  "dma5",
-					  "dma6",
-					  "dma7",
-					  "dma8",
-					  "dma9",
-					  "dma10",
-					  "dma11",
-					  "dma12",
-					  "dma13",
-					  "dma14",
-					  "dma-shared-all";
-			#dma-cells = <1>;
-			brcm,dma-channel-mask = <0x7f35>;
-		};
-
-		intc: interrupt-controller@7e00b200 {
-			compatible = "brcm,bcm2835-armctrl-ic";
-			reg = <0x7e00b200 0x200>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pm: watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-			reg = <0x7e100000 0x114>,
-			      <0x7e00a000 0x24>;
-			clocks = <&clocks BCM2835_CLOCK_V3D>,
-				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
-				 <&clocks BCM2835_CLOCK_H264>,
-				 <&clocks BCM2835_CLOCK_ISP>;
-			clock-names = "v3d", "peri_image", "h264", "isp";
-			system-power-controller;
-		};
-
-		clocks: cprman@7e101000 {
-			compatible = "brcm,bcm2835-cprman";
-			#clock-cells = <1>;
-			reg = <0x7e101000 0x2000>;
-
-			/* CPRMAN derives almost everything from the
-			 * platform's oscillator.  However, the DSI
-			 * pixel clocks come from the DSI analog PHY.
-			 */
-			clocks = <&clk_osc>,
-				<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
-				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
-		};
-
-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-			interrupts = <2 29>;
-		};
-
-		mailbox: mailbox@7e00b880 {
-			compatible = "brcm,bcm2835-mbox";
-			reg = <0x7e00b880 0x40>;
-			interrupts = <0 1>;
-			#mbox-cells = <0>;
-		};
-
-		gpio: gpio@7e200000 {
-			compatible = "brcm,bcm2835-gpio";
-			reg = <0x7e200000 0xb4>;
-			/*
-			 * The GPIO IP block is designed for 3 banks of GPIOs.
-			 * Each bank has a GPIO interrupt for itself.
-			 * There is an overall "any bank" interrupt.
-			 * In order, these are GIC interrupts 17, 18, 19, 20.
-			 * Since the BCM2835 only has 2 banks, the 2nd bank
-			 * interrupt output appears to be mirrored onto the
-			 * 3rd bank's interrupt signal.
-			 * So, a bank0 interrupt shows up on 17, 20, and
-			 * a bank1 interrupt shows up on 18, 19, 20!
-			 */
-			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			/* Defines pin muxing groups according to
-			 * BCM2835-ARM-Peripherals.pdf page 102.
-			 *
-			 * While each pin can have its mux selected
-			 * for various functions individually, some
-			 * groups only make sense to switch to a
-			 * particular function together.
-			 */
-			dpi_gpio0: dpi_gpio0 {
-				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
-					     12 13 14 15 16 17 18 19
-					     20 21 22 23 24 25 26 27>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-			emmc_gpio22: emmc_gpio22 {
-				brcm,pins = <22 23 24 25 26 27>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-			emmc_gpio34: emmc_gpio34 {
-				brcm,pins = <34 35 36 37 38 39>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-				brcm,pull = <BCM2835_PUD_OFF
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP
-					     BCM2835_PUD_UP>;
-			};
-			emmc_gpio48: emmc_gpio48 {
-				brcm,pins = <48 49 50 51 52 53>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-
-			gpclk0_gpio4: gpclk0_gpio4 {
-				brcm,pins = <4>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk1_gpio5: gpclk1_gpio5 {
-				brcm,pins = <5>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk1_gpio42: gpclk1_gpio42 {
-				brcm,pins = <42>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk1_gpio44: gpclk1_gpio44 {
-				brcm,pins = <44>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk2_gpio6: gpclk2_gpio6 {
-				brcm,pins = <6>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			gpclk2_gpio43: gpclk2_gpio43 {
-				brcm,pins = <43>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-				brcm,pull = <BCM2835_PUD_OFF>;
-			};
-
-			i2c0_gpio0: i2c0_gpio0 {
-				brcm,pins = <0 1>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			i2c0_gpio28: i2c0_gpio28 {
-				brcm,pins = <28 29>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			i2c0_gpio44: i2c0_gpio44 {
-				brcm,pins = <44 45>;
-				brcm,function = <BCM2835_FSEL_ALT1>;
-			};
-			i2c1_gpio2: i2c1_gpio2 {
-				brcm,pins = <2 3>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			i2c1_gpio44: i2c1_gpio44 {
-				brcm,pins = <44 45>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-			i2c_slave_gpio18: i2c_slave_gpio18 {
-				brcm,pins = <18 19 20 21>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-
-			jtag_gpio4: jtag_gpio4 {
-				brcm,pins = <4 5 6 12 13>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			jtag_gpio22: jtag_gpio22 {
-				brcm,pins = <22 23 24 25 26 27>;
-				brcm,function = <BCM2835_FSEL_ALT4>;
-			};
-
-			pcm_gpio18: pcm_gpio18 {
-				brcm,pins = <18 19 20 21>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			pcm_gpio28: pcm_gpio28 {
-				brcm,pins = <28 29 30 31>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-
-			pwm0_gpio12: pwm0_gpio12 {
-				brcm,pins = <12>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			pwm0_gpio18: pwm0_gpio18 {
-				brcm,pins = <18>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			pwm0_gpio40: pwm0_gpio40 {
-				brcm,pins = <40>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			pwm1_gpio13: pwm1_gpio13 {
-				brcm,pins = <13>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			pwm1_gpio19: pwm1_gpio19 {
-				brcm,pins = <19>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			pwm1_gpio41: pwm1_gpio41 {
-				brcm,pins = <41>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			pwm1_gpio45: pwm1_gpio45 {
-				brcm,pins = <45>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-
-			sdhost_gpio48: sdhost_gpio48 {
-				brcm,pins = <48 49 50 51 52 53>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-
-			spi0_gpio7: spi0_gpio7 {
-				brcm,pins = <7 8 9 10 11>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			spi0_gpio35: spi0_gpio35 {
-				brcm,pins = <35 36 37 38 39>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			spi1_gpio16: spi1_gpio16 {
-				brcm,pins = <16 17 18 19 20 21>;
-				brcm,function = <BCM2835_FSEL_ALT4>;
-			};
-			spi2_gpio40: spi2_gpio40 {
-				brcm,pins = <40 41 42 43 44 45>;
-				brcm,function = <BCM2835_FSEL_ALT4>;
-			};
-
-			uart0_gpio14: uart0_gpio14 {
-				brcm,pins = <14 15>;
-				brcm,function = <BCM2835_FSEL_ALT0>;
-			};
-			/* Separate from the uart0_gpio14 group
-			 * because it conflicts with spi1_gpio16, and
-			 * people often run uart0 on the two pins
-			 * without flow control.
-			 */
-			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
-				brcm,pins = <16 17>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-			};
-			uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
-				brcm,pins = <30 31>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
-			};
-			uart0_gpio32: uart0_gpio32 {
-				brcm,pins = <32 33>;
-				brcm,function = <BCM2835_FSEL_ALT3>;
-				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
-			};
-			uart0_gpio36: uart0_gpio36 {
-				brcm,pins = <36 37>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-			uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
-				brcm,pins = <38 39>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
-
-			uart1_gpio14: uart1_gpio14 {
-				brcm,pins = <14 15>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
-				brcm,pins = <16 17>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_gpio32: uart1_gpio32 {
-				brcm,pins = <32 33>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
-				brcm,pins = <30 31>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_gpio40: uart1_gpio40 {
-				brcm,pins = <40 41>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
-				brcm,pins = <42 43>;
-				brcm,function = <BCM2835_FSEL_ALT5>;
-			};
-		};
-
-		uart0: serial@7e201000 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x200>;
-			interrupts = <2 25>;
-			clocks = <&clocks BCM2835_CLOCK_UART>,
-				 <&clocks BCM2835_CLOCK_VPU>;
-			clock-names = "uartclk", "apb_pclk";
-			arm,primecell-periphid = <0x00241011>;
-		};
-
-		sdhost: mmc@7e202000 {
-			compatible = "brcm,bcm2835-sdhost";
-			reg = <0x7e202000 0x100>;
-			interrupts = <2 24>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			dmas = <&dma 13>;
-			dma-names = "rx-tx";
-			status = "disabled";
-		};
-
-		i2s: i2s@7e203000 {
-			compatible = "brcm,bcm2835-i2s";
-			reg = <0x7e203000 0x24>;
-			clocks = <&clocks BCM2835_CLOCK_PCM>;
-
-			dmas = <&dma 2>,
-			       <&dma 3>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		spi: spi@7e204000 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204000 0x200>;
-			interrupts = <2 22>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			dmas = <&dma 6>, <&dma 7>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@7e205000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205000 0x200>;
-			interrupts = <2 21>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pixelvalve@7e206000 {
-			compatible = "brcm,bcm2835-pixelvalve0";
-			reg = <0x7e206000 0x100>;
-			interrupts = <2 13>; /* pwa0 */
-		};
-
-		pixelvalve@7e207000 {
-			compatible = "brcm,bcm2835-pixelvalve1";
-			reg = <0x7e207000 0x100>;
-			interrupts = <2 14>; /* pwa1 */
-		};
-
-		dpi: dpi@7e208000 {
-			compatible = "brcm,bcm2835-dpi";
-			reg = <0x7e208000 0x8c>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>,
-				 <&clocks BCM2835_CLOCK_DPI>;
-			clock-names = "core", "pixel";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		dsi0: dsi@7e209000 {
-			compatible = "brcm,bcm2835-dsi0";
-			reg = <0x7e209000 0x78>;
-			interrupts = <2 4>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <1>;
-
-			clocks = <&clocks BCM2835_PLLA_DSI0>,
-				 <&clocks BCM2835_CLOCK_DSI0E>,
-				 <&clocks BCM2835_CLOCK_DSI0P>;
-			clock-names = "phy", "escape", "pixel";
-
-			clock-output-names = "dsi0_byte",
-					     "dsi0_ddr2",
-					     "dsi0_ddr";
-
-		};
-
-		thermal: thermal@7e212000 {
-			compatible = "brcm,bcm2835-thermal";
-			reg = <0x7e212000 0x8>;
-			clocks = <&clocks BCM2835_CLOCK_TSENS>;
-			#thermal-sensor-cells = <0>;
-			status = "disabled";
-		};
-
-		aux: aux@7e215000 {
-			compatible = "brcm,bcm2835-aux";
-			#clock-cells = <1>;
-			reg = <0x7e215000 0x8>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-		};
-
-		uart1: serial@7e215040 {
-			compatible = "brcm,bcm2835-aux-uart";
-			reg = <0x7e215040 0x40>;
-			interrupts = <1 29>;
-			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
-			status = "disabled";
-		};
-
-		spi1: spi@7e215080 {
-			compatible = "brcm,bcm2835-aux-spi";
-			reg = <0x7e215080 0x40>;
-			interrupts = <1 29>;
-			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@7e2150c0 {
-			compatible = "brcm,bcm2835-aux-spi";
-			reg = <0x7e2150c0 0x40>;
-			interrupts = <1 29>;
-			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		pwm: pwm@7e20c000 {
-			compatible = "brcm,bcm2835-pwm";
-			reg = <0x7e20c000 0x28>;
-			clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
-			assigned-clock-rates = <10000000>;
-			#pwm-cells = <2>;
-			status = "disabled";
-		};
-
-		sdhci: sdhci@7e300000 {
-			compatible = "brcm,bcm2835-sdhci";
-			reg = <0x7e300000 0x100>;
-			interrupts = <2 30>;
-			clocks = <&clocks BCM2835_CLOCK_EMMC>;
-			status = "disabled";
-		};
-
-		hvs@7e400000 {
-			compatible = "brcm,bcm2835-hvs";
-			reg = <0x7e400000 0x6000>;
-			interrupts = <2 1>;
-		};
-
-		dsi1: dsi@7e700000 {
-			compatible = "brcm,bcm2835-dsi1";
-			reg = <0x7e700000 0x8c>;
-			interrupts = <2 12>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#clock-cells = <1>;
-
-			clocks = <&clocks BCM2835_PLLD_DSI1>,
-				 <&clocks BCM2835_CLOCK_DSI1E>,
-				 <&clocks BCM2835_CLOCK_DSI1P>;
-			clock-names = "phy", "escape", "pixel";
-
-			clock-output-names = "dsi1_byte",
-					     "dsi1_ddr2",
-					     "dsi1_ddr";
-
-			status = "disabled";
-		};
-
-		i2c1: i2c@7e804000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e804000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@7e805000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e805000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clocks BCM2835_CLOCK_VPU>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		vec: vec@7e806000 {
-			compatible = "brcm,bcm2835-vec";
-			reg = <0x7e806000 0x1000>;
-			clocks = <&clocks BCM2835_CLOCK_VEC>;
-			interrupts = <2 27>;
-			status = "disabled";
-		};
-
-		pixelvalve@7e807000 {
-			compatible = "brcm,bcm2835-pixelvalve2";
-			reg = <0x7e807000 0x100>;
-			interrupts = <2 10>; /* pixelvalve */
-		};
-
-		hdmi: hdmi@7e902000 {
-			compatible = "brcm,bcm2835-hdmi";
-			reg = <0x7e902000 0x600>,
-			      <0x7e808000 0x100>;
-			interrupts = <2 8>, <2 9>;
-			ddc = <&i2c2>;
-			clocks = <&clocks BCM2835_PLLH_PIX>,
-				 <&clocks BCM2835_CLOCK_HSM>;
-			clock-names = "pixel", "hdmi";
-			dmas = <&dma 17>;
-			dma-names = "audio-rx";
-			status = "disabled";
-		};
-
-		usb: usb@7e980000 {
-			compatible = "brcm,bcm2835-usb";
-			reg = <0x7e980000 0x10000>;
-			interrupts = <1 9>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clk_usb>;
-			clock-names = "otg";
-			phys = <&usbphy>;
-			phy-names = "usb2-phy";
-		};
-
-		v3d: v3d@7ec00000 {
-			compatible = "brcm,bcm2835-v3d";
-			reg = <0x7ec00000 0x1000>;
-			interrupts = <1 10>;
-			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
-		};
-
-		vc4: gpu {
-			compatible = "brcm,bcm2835-vc4";
-		};
-	};
-
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* The oscillator is the root of the clock tree. */
-		clk_osc: clock@3 {
-			compatible = "fixed-clock";
-			reg = <3>;
-			#clock-cells = <0>;
-			clock-output-names = "osc";
-			clock-frequency = <19200000>;
-		};
-
-		clk_usb: clock@4 {
-			compatible = "fixed-clock";
-			reg = <4>;
-			#clock-cells = <0>;
-			clock-output-names = "otg";
-			clock-frequency = <480000000>;
-		};
-	};
-
-	usbphy: phy {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
deleted file mode 100644
index e58c8077be1d..000000000000
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-
-/ {
-	compatible = "luxul,xap-1510v1", "brcm,bcm4708";
-	model = "Luxul XAP-1510 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
deleted file mode 100644
index 766db617455b..000000000000
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Luxul XWC-1000
- *
- * Copyright 2014 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xwc-1000", "brcm,bcm4708";
-	model = "Luxul XWC-1000 (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	nand: nand@18028000 {
-		nandcs@0 {
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "ubi";
-					reg = <0x00000000 0x08000000>;
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
deleted file mode 100644
index fed75e6ab58c..000000000000
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X arm platform code.
- * DTS for Netgear R6250 V1
- *
- * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r6250v1", "brcm,bcm4708";
-	model = "Netgear R6250 V1 (BCM4708)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		logo {
-			label = "bcm53xx:white:logo";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		power0 {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		power1 {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		usb {
-			label = "bcm53xx:blue:usb";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		wireless {
-			label = "bcm53xx:blue:wireless";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
deleted file mode 100644
index b9d95011637d..000000000000
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-
-/ {
-	compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Luxul XAP-1410 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
deleted file mode 100644
index 0052e1b24130..000000000000
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47081.dtsi"
-#include "bcm5301x-nand-cs0-bch4.dtsi"
-
-/ {
-	compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
-	model = "Luxul XWR-1200 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		lan3 {
-			label = "bcm53xx:green:lan3";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		lan4 {
-			label = "bcm53xx:green:lan4";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		wan {
-			label = "bcm53xx:green:wan";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		lan2 {
-			label = "bcm53xx:green:lan2";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		usb {
-			label = "bcm53xx:green:usb";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port2>, <&ehci_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		lan1 {
-			label = "bcm53xx:green:lan1";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
deleted file mode 100644
index ed8619b54d69..000000000000
--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Linksys EA9200";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
deleted file mode 100644
index 6c6199a53d09..000000000000
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for Netgear R8000
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
- * PERFORMANCE OF THIS SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "bcm4709.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
-	model = "Netgear R8000 (BCM4709)";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		5ghz-1 {
-			label = "bcm53xx:white:5ghz-1";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-		};
-
-		2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		wireless {
-			label = "bcm53xx:white:wireless";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		wps {
-			label = "bcm53xx:white:wps";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-		};
-
-		5ghz-2 {
-			label = "bcm53xx:white:5ghz-2";
-			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-		};
-
-		usb3 {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-
-		usb2 {
-			label = "bcm53xx:white:usb2";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rfkill {
-			label = "WiFi";
-			linux,code = <KEY_RFKILL>;
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-
-		brightness {
-			label = "Backlight";
-			linux,code = <KEY_BRIGHTNESS_ZERO>;
-			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&pcie0 {
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@0,0,0 {
-		reg = <0x0000 0 0 0 0>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		wifi@0,1,0 {
-			reg = <0x0000 0 0 0 0>;
-			ieee80211-freq-limit = <5735000 5835000>;
-		};
-	};
-};
-
-&pcie1 {
-	#address-cells = <3>;
-	#size-cells = <2>;
-
-	bridge@1,0,0 {
-		reg = <0x0000 0 0 0 0>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		bridge@1,1,0 {
-			reg = <0x0000 0 0 0 0>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			bridge@1,2,2 {
-				reg = <0x1000 0 0 0 0>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-
-				wifi@1,4,0 {
-					reg = <0x0000 0 0 0 0>;
-					ieee80211-freq-limit = <5170000 5730000>;
-				};
-			};
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
deleted file mode 100644
index e1bb8661955f..000000000000
--- a/arch/arm/boot/dts/bcm4709.dtsi
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- */
-
-#include "bcm4708.dtsi"
-
-&uart0 {
-	clock-frequency = <125000000>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
deleted file mode 100644
index 911c65fbf251..000000000000
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for D-Link DIR-885L
- *
- * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch1.dtsi"
-
-/ {
-	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
-	model = "D-Link DIR-885L";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	nand: nand@18028000 {
-		nandcs@0 {
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					label = "firmware";
-					reg = <0x00000000 0x08000000>;
-				};
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power-white {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		wan-white {
-			label = "bcm53xx:white:wan";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		power-amber {
-			label = "bcm53xx:amber:power";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		wan-amber {
-			label = "bcm53xx:amber:wan";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		usb3-white {
-			label = "bcm53xx:white:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		2ghz {
-			label = "bcm53xx:white:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:white:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-
-		/* Switch: router / extender */
-		extender {
-			label = "Extender";
-			linux,code = <BTN_0>;
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-		};
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
deleted file mode 100644
index 0faae8950375..000000000000
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ /dev/null
@@ -1,270 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Linksys EA9500";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		wps {
-			label = "WPS";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		rfkill {
-				label = "WiFi";
-				linux,code = <KEY_RFKILL>;
-				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-		};
-
-		reset {
-				label = "Reset";
-				linux,code = <KEY_RESTART>;
-				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wps {
-			label = "bcm53xx:white:wps";
-			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
-		};
-
-		usb2 {
-			label = "bcm53xx:green:usb2";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port2>, <&ehci_port2>;
-			linux,default-trigger = "usbport";
-		};
-
-		usb3 {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		power {
-			label = "bcm53xx:white:power";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-		};
-
-		wifi-disabled {
-			label = "bcm53xx:amber:wifi-disabled";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-		};
-
-		wifi-enabled {
-			label = "bcm53xx:white:wifi-enabled";
-			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-		};
-
-		bluebar1 {
-			label = "bcm53xx:white:bluebar1";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		bluebar2 {
-			label = "bcm53xx:white:bluebar2";
-			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		bluebar3 {
-			label = "bcm53xx:white:bluebar3";
-			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-		};
-
-		bluebar4 {
-			label = "bcm53xx:white:bluebar4";
-			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-		};
-
-		bluebar5 {
-			label = "bcm53xx:white:bluebar5";
-			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-		};
-
-		bluebar6 {
-			label = "bcm53xx:white:bluebar6";
-			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-		};
-
-		bluebar7 {
-			label = "bcm53xx:white:bluebar7";
-			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		bluebar8 {
-			label = "bcm53xx:white:bluebar8";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	mdio-bus-mux {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* BIT(9) = 1 => external mdio */
-		mdio_ext: mdio@200 {
-			reg = <0x200>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-
-	mdio-mii-mux {
-		compatible = "mdio-mux-mmioreg";
-		mdio-parent-bus = <&mdio_ext>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x1800c1c0 0x4>;
-
-		/* BIT(6) = mdc, BIT(7) = mdio */
-		mux-mask = <0xc0>;
-
-		mdio-mii@0 {
-			/* Enable MII function */
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			switch@0  {
-				compatible = "brcm,bcm53125";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-				reset-names = "robo_reset";
-				reg = <0>;
-				dsa,member = <1 0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-						label = "lan1";
-					};
-
-					port@1 {
-						reg = <1>;
-						label = "lan5";
-					};
-
-					port@2 {
-						reg = <2>;
-						label = "lan2";
-					};
-
-					port@3 {
-						reg = <3>;
-						label = "lan6";
-					};
-
-					port@4 {
-						reg = <4>;
-						label = "lan3";
-					};
-
-					sw1_p8: port@8 {
-						reg = <8>;
-						ethernet = <&sw0_p0>;
-						label = "cpu";
-
-						fixed-link {
-							speed = <1000>;
-							full-duplex;
-						};
-					};
-				};
-			};
-		};
-	};
-};
-
-&usb2 {
-	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-};
-
-&srab {
-	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-	status = "okay";
-	dsa,member = <0 0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-			label = "lan7";
-		};
-
-		port@2 {
-			reg = <2>;
-			label = "lan4";
-		};
-
-		port@3 {
-			reg = <3>;
-			label = "lan8";
-		};
-
-		port@4 {
-			reg = <4>;
-			label = "wan";
-		};
-
-		port@8 {
-			reg = <8>;
-			ethernet = <&gmac2>;
-			label = "cpu";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		sw0_p0: port@0 {
-			reg = <0>;
-			label = "extsw";
-
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
deleted file mode 100644
index 50f7cd08cfbb..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul ABR-4500 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		usb3 {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-				<&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
deleted file mode 100644
index b47fb0700a1f..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-
-/ {
-	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XAP-1610 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status	{
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		2ghz {
-			label = "bcm53xx:blue:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:blue:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&spi_nor {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
deleted file mode 100644
index bcc420f85b56..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm4708.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XBR-4500 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		status {
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "timer";
-		};
-
-		usb3 {
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-				<&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
deleted file mode 100644
index ac7515423474..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2016 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch4.dtsi"
-
-/ {
-	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XWR-3100 V1";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power	{
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		lan3	{
-			label = "bcm53xx:green:lan3";
-			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-		};
-
-		lan4	{
-			label = "bcm53xx:green:lan4";
-			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-		};
-
-		wan	{
-			label = "bcm53xx:green:wan";
-			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-		};
-
-		lan1	{
-			label = "bcm53xx:green:lan1";
-			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-		};
-
-		lan2	{
-			label = "bcm53xx:green:lan2";
-			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-		};
-
-		usb3	{
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		status	{
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
deleted file mode 100644
index 6d28b7dacd05..000000000000
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ /dev/null
@@ -1,76 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2018 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm47094.dtsi"
-#include "bcm5301x-nand-cs0-bch8.dtsi"
-
-/ {
-	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
-	model = "Luxul XWR-3150 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power	{
-			label = "bcm53xx:green:power";
-			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-on";
-		};
-
-		usb3	{
-			label = "bcm53xx:green:usb3";
-			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-					  <&xhci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		status	{
-			label = "bcm53xx:green:status";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-
-		2ghz {
-			label = "bcm53xx:green:2ghz";
-			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-		};
-
-		5ghz {
-			label = "bcm53xx:green:5ghz";
-			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&usb3 {
-	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-};
-
-&spi_nor {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
deleted file mode 100644
index cdc5ff593adb..000000000000
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
- */
-
-#include "bcm4708.dtsi"
-
-/ {
-};
-
-&usb3_phy {
-	compatible = "brcm,ns-bx-usb3-phy";
-};
-
-&uart0 {
-	clock-frequency = <125000000>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
deleted file mode 100644
index 57ca1cfaecd8..000000000000
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2017 Luxul Inc.
- */
-
-/dts-v1/;
-
-#include "bcm53573.dtsi"
-
-/ {
-	compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
-	model = "Luxul XAP-1440 V1";
-
-	chosen {
-		bootargs = "earlycon";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		wlan {
-			label = "bcm53xx:blue:wlan";
-			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
-		};
-
-		system {
-			label = "bcm53xx:green:system";
-			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "timer";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		restart {
-			label = "Reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
deleted file mode 100644
index 372dc1eb88a0..000000000000
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
- * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
- *
- * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-#include <dt-bindings/clock/bcm-nsp.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-
-	chipcommonA@18000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x18000000 0x00001000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		uart0: serial@300 {
-			compatible = "ns16550";
-			reg = <0x0300 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			status = "disabled";
-		};
-
-		uart1: serial@400 {
-			compatible = "ns16550";
-			reg = <0x0400 0x100>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&iprocslow>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinmux_uart1>;
-			status = "disabled";
-		};
-	};
-
-	mpcore@19000000 {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x19000000 0x00023000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		a9pll: arm_clk@0 {
-			#clock-cells = <0>;
-			compatible = "brcm,nsp-armpll";
-			clocks = <&osc>;
-			reg = <0x00000 0x1000>;
-		};
-
-		scu@20000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x20000 0x100>;
-		};
-
-		timer@20200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&periph_clk>;
-		};
-
-		timer@20600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x20600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		watchdog@20620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x20620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&periph_clk>;
-		};
-
-		gic: interrupt-controller@21000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x21000 0x1000>,
-			      <0x20100 0x100>;
-		};
-
-		L2: cache-controller@22000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x22000 0x1000>;
-			cache-unified;
-			arm,shared-override;
-			prefetch-data = <1>;
-			prefetch-instr = <1>;
-			cache-level = <2>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts =
-			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc: oscillator {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <25000000>;
-		};
-
-		iprocmed: iprocmed {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		iprocslow: iprocslow {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&a9pll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-	};
-
-	usb2_phy: usb2-phy@1800c000 {
-		compatible = "brcm,ns-usb2-phy";
-		reg = <0x1800c000 0x1000>;
-		reg-names = "dmu";
-		#phy-cells = <0>;
-		clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-		clock-names = "phy-ref-clk";
-	};
-
-	axi@18000000 {
-		compatible = "brcm,bus-axi";
-		reg = <0x18000000 0x1000>;
-		ranges = <0x00000000 0x18000000 0x00100000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0x000fffff 0xffff>;
-		interrupt-map = 
-			/* ChipCommon */
-			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Switch Register Access Block */
-			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 0 */
-			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 1 */
-			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* PCIe Controller 2 */
-			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 2.0 Controller */
-			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* USB 3.0 Controller */
-			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 0 */
-			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 1 */
-			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 2 */
-			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* Ethernet Controller 3 */
-			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-
-			/* NAND Controller */
-			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-
-		chipcommon: chipcommon@0 {
-			reg = <0x00000000 0x1000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		pcie0: pcie@12000 {
-			reg = <0x00012000 0x1000>;
-		};
-
-		pcie1: pcie@13000 {
-			reg = <0x00013000 0x1000>;
-		};
-
-		usb2: usb2@21000 {
-			reg = <0x00021000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupt-parent = <&gic>;
-
-			ehci: ehci@21000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ehci";
-				reg = <0x00021000 0x1000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ehci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				ehci_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-
-			ohci: ohci@22000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-ohci";
-				reg = <0x00022000 0x1000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ohci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-
-				ohci_port2: port@2 {
-					reg = <2>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		usb3: usb3@23000 {
-			reg = <0x00023000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupt-parent = <&gic>;
-
-			xhci: xhci@23000 {
-				#usb-cells = <0>;
-
-				compatible = "generic-xhci";
-				reg = <0x00023000 0x1000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb3_phy>;
-				phy-names = "usb";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				xhci_port1: port@1 {
-					reg = <1>;
-					#trigger-source-cells = <0>;
-				};
-			};
-		};
-
-		gmac0: ethernet@24000 {
-			reg = <0x24000 0x800>;
-		};
-
-		gmac1: ethernet@25000 {
-			reg = <0x25000 0x800>;
-		};
-
-		gmac2: ethernet@26000 {
-			reg = <0x26000 0x800>;
-		};
-
-		gmac3: ethernet@27000 {
-			reg = <0x27000 0x800>;
-		};
-	};
-
-	mdio: mdio@18003000 {
-		compatible = "brcm,iproc-mdio";
-		reg = <0x18003000 0x8>;
-		#size-cells = <1>;
-		#address-cells = <0>;
-	};
-
-	mdio-bus-mux@18003000 {
-		compatible = "mdio-mux-mmioreg";
-		mdio-parent-bus = <&mdio>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x18003000 0x4>;
-		mux-mask = <0x200>;
-
-		mdio@0 {
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			usb3_phy: usb3-phy@10 {
-				compatible = "brcm,ns-ax-usb3-phy";
-				reg = <0x10>;
-				usb3-dmp-syscon = <&usb3_dmp>;
-				#phy-cells = <0>;
-				status = "disabled";
-			};
-		};
-	};
-
-	usb3_dmp: syscon@18105000 {
-		reg = <0x18105000 0x1000>;
-	};
-
-	i2c0: i2c@18009000 {
-		compatible = "brcm,iproc-i2c";
-		reg = <0x18009000 0x50>;
-		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
-
-	dmu@1800c000 {
-		compatible = "simple-bus";
-		ranges = <0 0x1800c000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		cru@100 {
-			compatible = "simple-bus";
-			reg = <0x100 0x1a4>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			pin-controller@1c0 {
-				compatible = "brcm,bcm4708-pinmux";
-				reg = <0x1c0 0x24>;
-				reg-names = "cru_gpio_control";
-
-				spi-pins {
-					groups = "spi_grp";
-					function = "spi";
-				};
-
-				i2c {
-					groups = "i2c_grp";
-					function = "i2c";
-				};
-
-				pwm {
-					groups = "pwm0_grp", "pwm1_grp",
-						 "pwm2_grp", "pwm3_grp";
-					function = "pwm";
-				};
-
-				pinmux_uart1: uart1 {
-					groups = "uart1_grp";
-					function = "uart1";
-				};
-			};
-		};
-	};
-
-	lcpll0: lcpll0@1800c100 {
-		#clock-cells = <1>;
-		compatible = "brcm,nsp-lcpll0";
-		reg = <0x1800c100 0x14>;
-		clocks = <&osc>;
-		clock-output-names = "lcpll0", "pcie_phy", "sdio",
-				     "ddr_phy";
-	};
-
-	genpll: genpll@1800c140 {
-		#clock-cells = <1>;
-		compatible = "brcm,nsp-genpll";
-		reg = <0x1800c140 0x24>;
-		clocks = <&osc>;
-		clock-output-names = "genpll", "phy", "ethernetclk",
-				     "usbclk", "iprocfast", "sata1",
-				     "sata2";
-	};
-
-	thermal: thermal@1800c2c0 {
-		compatible = "brcm,ns-thermal";
-		reg = <0x1800c2c0 0x10>;
-		#thermal-sensor-cells = <0>;
-	};
-
-	srab: srab@18007000 {
-		compatible = "brcm,bcm5301x-srab";
-		reg = <0x18007000 0x1000>;
-
-		status = "disabled";
-
-		/* ports are defined in board DTS */
-	};
-
-	rng: rng@18004000 {
-		compatible = "brcm,bcm5301x-rng";
-		reg = <0x18004000 0x14>;
-	};
-
-	nand: nand@18028000 {
-		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-		reg-names = "nand", "iproc-idm", "iproc-ext";
-		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		brcm,nand-has-wp;
-	};
-
-	spi@18029200 {
-		compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
-		reg = <0x18029200 0x184>,
-		      <0x18029000 0x124>,
-		      <0x1811b408 0x004>,
-		      <0x180293a0 0x01c>;
-		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "spi_lr_fullness_reached",
-				  "spi_lr_session_aborted",
-				  "spi_lr_impatient",
-				  "spi_lr_session_done",
-				  "spi_lr_overhead",
-				  "mspi_done",
-				  "mspi_halted";
-		clocks = <&iprocmed>;
-		clock-names = "iprocmed";
-		num-cs = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		spi_nor: spi-nor@0 {
-			compatible = "jedec,spi-nor";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-			status = "disabled";
-
-			partitions {
-				compatible = "brcm,bcm947xx-cfe-partitions";
-			};
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <1000>;
-			coefficients = <(-556) 418000>;
-			thermal-sensors = <&thermal>;
-
-			trips {
-				cpu-crit {
-					temperature	= <125000>;
-					hysteresis	= <0>;
-					type		= "critical";
-				};
-			};
-
-			cooling-maps {
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
deleted file mode 100644
index a9bb7ad81378..000000000000
--- a/arch/arm/boot/dts/bcm59056.dtsi
+++ /dev/null
@@ -1,91 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-* Copyright 2014 Linaro Limited
-* Author: Matt Porter <mporter@linaro.org>
-*/
-
-&pmu {
-	compatible = "brcm,bcm59056";
-	regulators {
-		rfldo_reg: rfldo {
-		};
-
-		camldo1_reg: camldo1 {
-		};
-
-		camldo2_reg: camldo2 {
-		};
-
-		simldo1_reg: simldo1 {
-		};
-
-		simldo2_reg: simldo2 {
-		};
-
-		sdldo_reg: sdldo {
-		};
-
-		sdxldo_reg: sdxldo {
-		};
-
-		mmcldo1_reg: mmcldo1 {
-		};
-
-		mmcldo2_reg: mmcldo2 {
-		};
-
-		audldo_reg: audldo {
-		};
-
-		micldo_reg: micldo {
-		};
-
-		usbldo_reg: usbldo {
-		};
-
-		vibldo_reg: vibldo {
-		};
-
-		csr_reg: csr {
-		};
-
-		iosr1_reg: iosr1 {
-		};
-
-		iosr2_reg: iosr2 {
-		};
-
-		msr_reg: msr {
-		};
-
-		sdsr1_reg: sdsr1 {
-		};
-
-		sdsr2_reg: sdsr2 {
-		};
-
-		vsr_reg: vsr {
-		};
-
-		gpldo1_reg: gpldo1 {
-		};
-
-		gpldo2_reg: gpldo2 {
-		};
-
-		gpldo3_reg: gpldo3 {
-		};
-
-		gpldo4_reg: gpldo4 {
-		};
-
-		gpldo5_reg: gpldo5 {
-		};
-
-		gpldo6_reg: gpldo6 {
-		};
-
-		vbus_reg: vbus {
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
deleted file mode 100644
index 9c0325cf9e22..000000000000
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ /dev/null
@@ -1,229 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Broadcom BCM63138 DSL SoCs Device Tree
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "brcm,bcm63138";
-	model = "Broadcom BCM63138 DSL SoC";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		uart0 = &serial0;
-		uart1 = &serial1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <0>;
-			enable-method = "brcm,bcm63138";
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			next-level-cache = <&L2>;
-			reg = <1>;
-			enable-method = "brcm,bcm63138";
-			resets = <&pmb0 4 1>;
-		};
-	};
-
-	clocks {
-		/* UBUS peripheral clock */
-		periph_clk: periph_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-			clock-output-names = "periph";
-		};
-
-		/* peripheral clock for system timer */
-		axi_clk: axi_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <2>;
-			clock-mult = <1>;
-		};
-
-		/* APB bus clock */
-		apb_clk: apb_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clocks = <&armpll>;
-			clock-div = <4>;
-			clock-mult = <1>;
-		};
-	};
-
-	/* ARM bus */
-	axi@80000000 {
-		compatible = "simple-bus";
-		ranges = <0 0x80000000 0x784000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		L2: cache-controller@1d000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x1d000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			cache-size = <524288>;
-			cache-sets = <1024>;
-			cache-line-size = <32>;
-			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		scu: scu@1e000 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x1e000 0x100>;
-		};
-
-		gic: interrupt-controller@1f000 {
-			compatible = "arm,cortex-a9-gic";
-			reg = <0x1f000 0x1000
-				0x1e100 0x100>;
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			interrupt-controller;
-		};
-
-		global_timer: timer@1e200 {
-			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x1e200 0x20>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&axi_clk>;
-		};
-
-		local_timer: local-timer@1e600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x1e600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_EDGE_RISING)>;
-			clocks = <&axi_clk>;
-		};
-
-		twd_watchdog: watchdog@1e620 {
-			compatible = "arm,cortex-a9-twd-wdt";
-			reg = <0x1e620 0x20>;
-			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		armpll: armpll@20000 {
-			#clock-cells = <0>;
-			compatible = "brcm,bcm63138-armpll";
-			clocks = <&periph_clk>;
-			reg = <0x20000 0xf00>;
-		};
-
-		pmb0: reset-controller@4800c0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800c0 0x10>;
-			#reset-cells = <2>;
-		};
-
-		pmb1: reset-controller@4800e0 {
-			compatible = "brcm,bcm63138-pmb";
-			reg = <0x4800e0 0x10>;
-			#reset-cells = <2>;
-		};
-
-		ahci: sata@a000 {
-			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
-			reg-names = "ahci", "top-ctrl";
-			reg = <0xa000 0x9ac>, <0x8040 0x24>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			resets = <&pmb0 3 1>;
-			reset-names = "ahci";
-			status = "disabled";
-
-			sata0: sata-port@0 {
-				reg = <0>;
-				phys = <&sata_phy0>;
-			};
-		};
-
-		sata_phy: sata-phy@8100 {
-			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
-			reg = <0x8100 0x1e00>;
-			reg-names = "phy";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-
-			sata_phy0: sata-phy@0 {
-				reg = <0>;
-				#phy-cells = <0>;
-			};
-		};
-	};
-
-	/* Legacy UBUS base */
-	ubus@fffe8000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xfffe8000 0x8100>;
-
-		timer: timer@80 {
-			compatible = "brcm,bcm6328-timer", "syscon";
-			reg = <0x80 0x3c>;
-		};
-
-		serial0: serial@600 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x600 0x1b>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		serial1: serial@620 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x620 0x1b>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&periph_clk>;
-			clock-names = "periph";
-			status = "disabled";
-		};
-
-		nand: nand@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
-			reg = <0x2000 0x600>, <0xf0 0x10>;
-			reg-names = "nand", "nand-int-base";
-			status = "disabled";
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "nand";
-		};
-
-		bootlut: bootlut@8000 {
-			compatible = "brcm,bcm63138-bootlut";
-			reg = <0x8000 0x50>;
-		};
-
-		reboot {
-			compatible = "syscon-reboot";
-			regmap = <&timer>;
-			offset = <0x34>;
-			mask = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
deleted file mode 100644
index 5b177274f182..000000000000
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ /dev/null
@@ -1,52 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Broadcom BCM63138 Reference Board DTS
- */
-
-/dts-v1/;
-
-#include "bcm63138.dtsi"
-
-/ {
-	compatible = "brcm,BCM963138DVT", "brcm,bcm63138";
-	model = "Broadcom BCM963138DVT";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &serial0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x08000000>;
-	};
-
-};
-
-&serial0 {
-	status = "okay";
-};
-
-&serial1 {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	nandcs@0 {
-		compatible = "brcm,nandcs";
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-ecc-step-size = <512>;
-		brcm,nand-oob-sectors-size = <16>;
-	};
-};
-
-&ahci {
-	status = "okay";
-};
-
-&sata_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile
new file mode 100644
index 000000000000..2552e11b5e31
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/Makefile
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0
+# Enables support for device-tree overlays
+DTC_FLAGS_bcm2835-rpi-b := -@
+DTC_FLAGS_bcm2835-rpi-a := -@
+DTC_FLAGS_bcm2835-rpi-b-rev2 := -@
+DTC_FLAGS_bcm2835-rpi-b-plus := -@
+DTC_FLAGS_bcm2835-rpi-a-plus := -@
+DTC_FLAGS_bcm2835-rpi-cm1-io1 := -@
+DTC_FLAGS_bcm2836-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-2-b := -@
+DTC_FLAGS_bcm2837-rpi-3-a-plus := -@
+DTC_FLAGS_bcm2837-rpi-3-b := -@
+DTC_FLAGS_bcm2837-rpi-3-b-plus := -@
+DTC_FLAGS_bcm2837-rpi-cm3-io3 := -@
+DTC_FLAGS_bcm2837-rpi-zero-2-w := -@
+DTC_FLAGS_bcm2711-rpi-400 := -@
+DTC_FLAGS_bcm2711-rpi-4-b := -@
+DTC_FLAGS_bcm2711-rpi-cm4-io := -@
+DTC_FLAGS_bcm2835-rpi-zero := -@
+DTC_FLAGS_bcm2835-rpi-zero-w := -@
+dtb-$(CONFIG_ARCH_BCM2835) += \
+	bcm2835-rpi-b.dtb \
+	bcm2835-rpi-a.dtb \
+	bcm2835-rpi-b-rev2.dtb \
+	bcm2835-rpi-b-plus.dtb \
+	bcm2835-rpi-a-plus.dtb \
+	bcm2835-rpi-cm1-io1.dtb \
+	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-2-b.dtb \
+	bcm2837-rpi-3-a-plus.dtb \
+	bcm2837-rpi-3-b.dtb \
+	bcm2837-rpi-3-b-plus.dtb \
+	bcm2837-rpi-cm3-io3.dtb \
+	bcm2837-rpi-zero-2-w.dtb \
+	bcm2711-rpi-400.dtb \
+	bcm2711-rpi-4-b.dtb \
+	bcm2711-rpi-cm4-io.dtb \
+	bcm2835-rpi-zero.dtb \
+	bcm2835-rpi-zero-w.dtb
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+	bcm6846-genexis-xg6846b.dtb \
+	bcm947622.dtb \
+	bcm963138.dtb \
+	bcm963138dvt.dtb \
+	bcm963148.dtb \
+	bcm963178.dtb \
+	bcm96756.dtb \
+	bcm96846.dtb \
+	bcm96855.dtb \
+	bcm96878.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += \
+	bcm4708-asus-rt-ac56u.dtb \
+	bcm4708-asus-rt-ac68u.dtb \
+	bcm4708-buffalo-wxr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp2.dtb \
+	bcm4708-linksys-ea6300-v1.dtb \
+	bcm4708-linksys-ea6500-v2.dtb \
+	bcm4708-luxul-xap-1510.dtb \
+	bcm4708-luxul-xwc-1000.dtb \
+	bcm4708-netgear-r6250.dtb \
+	bcm4708-netgear-r6300-v2.dtb \
+	bcm4708-smartrg-sr400ac.dtb \
+	bcm47081-asus-rt-n18u.dtb \
+	bcm47081-buffalo-wzr-600dhp2.dtb \
+	bcm47081-buffalo-wzr-900dhp.dtb \
+	bcm47081-luxul-xap-1410.dtb \
+	bcm47081-luxul-xwr-1200.dtb \
+	bcm47081-tplink-archer-c5-v2.dtb \
+	bcm4709-asus-rt-ac3200.dtb \
+	bcm4709-asus-rt-ac87u.dtb \
+	bcm4709-buffalo-wxr-1900dhp.dtb \
+	bcm4709-linksys-ea9200.dtb \
+	bcm4709-netgear-r7000.dtb \
+	bcm4709-netgear-r8000.dtb \
+	bcm4709-tplink-archer-c9-v1.dtb \
+	bcm47094-asus-rt-ac3100.dtb \
+	bcm47094-asus-rt-ac5300.dtb \
+	bcm47094-asus-rt-ac88u.dtb \
+	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-dlink-dir-890l.dtb \
+	bcm47094-linksys-panamera.dtb \
+	bcm47094-luxul-abr-4500.dtb \
+	bcm47094-luxul-xap-1610.dtb \
+	bcm47094-luxul-xbr-4500.dtb \
+	bcm47094-luxul-xwc-2000.dtb \
+	bcm47094-luxul-xwr-3100.dtb \
+	bcm47094-luxul-xwr-3150-v1.dtb \
+	bcm47094-netgear-r8500.dtb \
+	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
+	bcm53016-dlink-dwl-8610ap.dtb \
+	bcm53016-meraki-mr32.dtb \
+	bcm94708.dtb \
+	bcm94709.dtb \
+	bcm953012er.dtb \
+	bcm953012hr.dtb \
+	bcm953012k.dtb
+dtb-$(CONFIG_ARCH_BCM_53573) += \
+	bcm47189-luxul-xap-1440.dtb \
+	bcm47189-luxul-xap-810.dtb \
+	bcm47189-tenda-ac9.dtb \
+	bcm947189acdbmr.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+	bcm911360_entphn.dtb \
+	bcm911360k.dtb \
+	bcm958300k.dtb \
+	bcm958305k.dtb
+dtb-$(CONFIG_ARCH_BCM_HR2) += \
+	bcm53340-ubnt-unifi-switch8.dtb
+dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
+	bcm28155-ap.dtb \
+	bcm21664-garnet.dtb \
+	bcm23550-sparrow.dtb
+dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958522er.dtb \
+	bcm958525er.dtb \
+	bcm958525xmc.dtb \
+	bcm958622hr.dtb \
+	bcm958623hr.dtb \
+	bcm958625-meraki-mx64.dtb \
+	bcm958625-meraki-mx64-a0.dtb \
+	bcm958625-meraki-mx64w.dtb \
+	bcm958625-meraki-mx64w-a0.dtb \
+	bcm958625-meraki-mx65.dtb \
+	bcm958625-meraki-mx65w.dtb \
+	bcm958625hr.dtb \
+	bcm988312hr.dtb \
+	bcm958625k.dtb
+dtb-$(CONFIG_ARCH_BRCMSTB) += \
+	bcm7445-bcm97445svmb.dtb
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus-clock.dtsi
index 52f91a12a99a..52f91a12a99a 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus-clock.dtsi
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
index 2dac3efc7640..07ca0d993c9f 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -91,7 +91,7 @@
 			      <0x20100 0x100>;
 		};
 
-		L2: l2-cache@22000 {
+		L2: cache-controller@22000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x22000 0x1000>;
 			cache-unified;
@@ -112,18 +112,18 @@
 			status = "disabled";
 		};
 
-		pcie_phy: phy@301d0a0 {
+		pcie_phy: pcie_phy@301d0a0 {
 			compatible = "brcm,cygnus-pcie-phy";
 			reg = <0x0301d0a0 0x14>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			pcie0_phy: phy@0 {
+			pcie0_phy: pcie-phy@0 {
 				reg = <0>;
 				#phy-cells = <0>;
 			};
 
-			pcie1_phy: phy@1 {
+			pcie1_phy: pcie-phy@1 {
 				reg = <1>;
 				#phy-cells = <0>;
 			};
@@ -167,6 +167,7 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupt-parent = <&mailbox>;
 			interrupts = <0>;
 		};
@@ -174,8 +175,8 @@
 		mdio: mdio@18002000 {
 			compatible = "brcm,iproc-mdio";
 			reg = <0x18002000 0x8>;
-			#size-cells = <1>;
-			#address-cells = <0>;
+			#size-cells = <0>;
+			#address-cells = <1>;
 			status = "disabled";
 
 			gphy0: ethernet-phy@0 {
@@ -234,8 +235,8 @@
 			compatible = "arm,sp805" , "arm,primecell";
 			reg = <0x18009000 0x1000>;
 			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		gpio_ccm: gpio@1800a000 {
@@ -247,6 +248,7 @@
 			gpio-controller;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 
 		i2c1: i2c@1800b000 {
@@ -274,8 +276,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-				  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000>,
+				 <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
 
 			phys = <&pcie0_phy>;
 			phy-names = "pcie-phy";
@@ -283,7 +285,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi0>;
-			msi0: msi-controller {
+			msi0: msi {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
@@ -309,8 +311,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
-			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-				  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000>,
+				 <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
 
 			phys = <&pcie1_phy>;
 			phy-names = "pcie-phy";
@@ -318,7 +320,7 @@
 			status = "disabled";
 
 			msi-parent = <&msi1>;
-			msi1: msi-controller {
+			msi1: msi {
 				compatible = "brcm,iproc-msi";
 				msi-controller;
 				interrupt-parent = <&gic>;
@@ -397,8 +399,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_0>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -409,8 +411,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_1>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -421,8 +423,8 @@
 			#size-cells = <0>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-0 = <&spi_2>;
-			clocks = <&axi81_clk>;
-			clock-names = "apb_pclk";
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -460,7 +462,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@18046000 {
+		nand_controller: nand-controller@18046000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
 			      <0x18046f00 0x20>;
@@ -518,6 +520,7 @@
 			gpio-controller;
 
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 42 1>,
 					<&pinctrl 1 44 3>,
@@ -591,7 +594,6 @@
 		adc: adc@180a6000 {
 			compatible = "brcm,iproc-static-adc";
 			#io-channel-cells = <1>;
-			io-channel-ranges;
 			adc-syscon = <&ts_adc_syscon>;
 			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
 			clock-names = "tsc_clk";
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
index e4d49731287f..75545b10ef2f 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -54,8 +54,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>;
 	};
 
@@ -75,7 +75,7 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
@@ -83,7 +83,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x20>;
 			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
@@ -91,7 +91,7 @@
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x20620 0x20>;
 			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
-						  IRQ_TYPE_LEVEL_HIGH)>;
+						  IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&periph_clk>;
 		};
 
@@ -104,7 +104,7 @@
 			      <0x20100 0x100>;
 		};
 
-		L2: l2-cache@22000 {
+		L2: cache-controller@22000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x22000 0x1000>;
 			cache-unified;
@@ -179,7 +179,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x26000 0x600>,
 			      <0x11b408 0x600>,
@@ -200,6 +200,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -217,7 +218,7 @@
 		};
 
 		qspi: spi@27200 {
-			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
 			      <0x11c408 0x004>,
@@ -268,7 +269,7 @@
 			clock-frequency = <100000>;
 		};
 
-		watchdog@39000 {
+		watchdog: watchdog@39000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x39000 0x1000>;
 			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
@@ -318,7 +319,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi-controller {
+		msi0: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -354,7 +355,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi-controller {
+		msi1: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/broadcom/bcm-ns.dtsi b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
new file mode 100644
index 000000000000..d0d5f7e52a91
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-ns.dtsi
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+#include <dt-bindings/clock/bcm-nsp.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts =
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	chipcommon-a-bus@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x00001000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@300 {
+			compatible = "ns16550";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_uart1>;
+			status = "disabled";
+		};
+	};
+
+	mpcore-bus@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		scu@20000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x20000 0x100>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			arm,shared-override;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			cache-level = <2>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Switch Register Access Block */
+			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 1 */
+			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 2 */
+			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 3.0 Controller */
+			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 2 */
+			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 3 */
+			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* NAND Controller */
+			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			reg = <0x00000000 0x1000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcie0: pcie@12000 {
+			reg = <0x00012000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		pcie1: pcie@13000 {
+			reg = <0x00013000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		pcie2: pcie@14000 {
+			reg = <0x00014000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+		};
+
+		usb2: usb2@21000 {
+			reg = <0x00021000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			ehci: usb@21000 {
+				compatible = "generic-ehci";
+				reg = <0x00021000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+
+			ohci: usb@22000 {
+				compatible = "generic-ohci";
+				reg = <0x00022000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		usb3: usb3@23000 {
+			reg = <0x00023000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			xhci: usb@23000 {
+				compatible = "generic-xhci";
+				reg = <0x00023000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>;
+				phy-names = "usb";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				xhci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		gmac0: ethernet@24000 {
+			reg = <0x24000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac1: ethernet@25000 {
+			reg = <0x25000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac2: ethernet@26000 {
+			reg = <0x26000 0x800>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		gmac3: ethernet@27000 {
+			reg = <0x27000 0x800>;
+		};
+	};
+
+	pwm: pwm@18002000 {
+		compatible = "brcm,iproc-pwm";
+		reg = <0x18002000 0x28>;
+		clocks = <&osc>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	mdio: mdio@18003000 {
+		compatible = "brcm,iproc-mdio";
+		reg = <0x18003000 0x8>;
+		#size-cells = <0>;
+		#address-cells = <1>;
+	};
+
+	mdio-mux@18003000 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x18003000 0x4>;
+		mux-mask = <0x200>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_phy: usb3-phy@10 {
+				compatible = "brcm,ns-ax-usb3-phy";
+				reg = <0x10>;
+				usb3-dmp-syscon = <&usb3_dmp>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+	};
+
+	rng: rng@18004000 {
+		compatible = "brcm,bcm5301x-rng";
+		reg = <0x18004000 0x14>;
+	};
+
+	srab: ethernet-switch@18007000 {
+		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
+		reg = <0x18007000 0x1000>;
+
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+			};
+
+			port@5 {
+				reg = <5>;
+				ethernet = <&gmac0>;
+			};
+
+			port@7 {
+				reg = <7>;
+				ethernet = <&gmac1>;
+			};
+
+			port@8 {
+				reg = <8>;
+				ethernet = <&gmac2>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	uart2: serial@18008000 {
+		compatible = "ns16550a";
+		reg = <0x18008000 0x20>;
+		clocks = <&iprocslow>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	dmu-bus@1800c000 {
+		compatible = "simple-bus";
+		ranges = <0 0x1800c000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
+			reg = <0x100 0x1a4>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			usb2_phy: phy@164 {
+				compatible = "brcm,ns-usb2-phy";
+				reg = <0x164 0x4>;
+				brcm,syscon-clkset = <&cru_clkset>;
+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+				clock-names = "phy-ref-clk";
+				#phy-cells = <0>;
+			};
+
+			cru_clkset: syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
+			pinctrl: pinctrl@1c0 {
+				compatible = "brcm,bcm4708-pinmux";
+				reg = <0x1c0 0x24>;
+				reg-names = "cru_gpio_control";
+
+				spi-pins {
+					groups = "spi_grp";
+					function = "spi";
+				};
+
+				pinmux_i2c: i2c-pins {
+					groups = "i2c_grp";
+					function = "i2c";
+				};
+
+				pinmux_pwm: pwm-pins {
+					groups = "pwm0_grp", "pwm1_grp",
+						 "pwm2_grp", "pwm3_grp";
+					function = "pwm";
+				};
+
+				pinmux_uart1: uart1-pins {
+					groups = "uart1_grp";
+					function = "uart1";
+				};
+			};
+
+			thermal: thermal@2c0 {
+				compatible = "brcm,ns-thermal";
+				reg = <0x2c0 0x10>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
+	};
+
+	nand_controller: nand-controller@18028000 {
+		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
+		reg-names = "nand", "iproc-idm", "iproc-ext";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		brcm,nand-has-wp;
+	};
+
+	usb3_dmp: syscon@18105000 {
+		reg = <0x18105000 0x1000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			coefficients = <(-556) 418000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi
new file mode 100644
index 000000000000..f2e941dbab10
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp-ax.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar Plus Ax stepping-specific bindings.
+ * Notable differences from B0+ are the secondary-boot-reg and
+ * lack of DMA coherency.
+ */
+
+&cpu1 {
+	secondary-boot-reg = <0xffff042c>;
+};
+
+&dma {
+	/delete-property/ dma-coherent;
+};
+
+&sdio {
+	/delete-property/ dma-coherent;
+};
+
+&amac0 {
+	/delete-property/ dma-coherent;
+};
+
+&amac1 {
+	/delete-property/ dma-coherent;
+};
+
+&amac2 {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&mailbox {
+	/delete-property/ dma-coherent;
+};
+
+&xhci {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&ohci0 {
+	/delete-property/ dma-coherent;
+};
+
+&i2c0 {
+	/delete-property/ dma-coherent;
+};
+
+&sata {
+	/delete-property/ dma-coherent;
+};
+
+&pcie0 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie1 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie2 {
+	/delete-property/ dma-coherent;
+};
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index da6d70f09ef1..6a4482c93167 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -72,12 +72,12 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
-	mpcore@19000000 {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
@@ -122,7 +122,7 @@
 			      <0x20100 0x100>;
 		};
 
-		L2: l2-cache@22000 {
+		L2: cache-controller@22000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x22000 0x1000>;
 			cache-unified;
@@ -166,7 +166,7 @@
 		};
 	};
 
-	axi@18000000 {
+	axi: axi@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x0011c40c>;
 		#address-cells = <1>;
@@ -180,6 +180,7 @@
 			gpio-controller;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 0 32>;
 		};
@@ -200,7 +201,7 @@
 			status = "disabled";
 		};
 
-		dma@20000 {
+		dma: dma@20000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x20000 0x1000>;
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
@@ -215,9 +216,11 @@
 			clocks = <&iprocslow>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
+			dma-coherent;
+			status = "disabled";
 		};
 
-		sdio: sdhci@21000 {
+		sdio: mmc@21000 {
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x21000 0x100>;
 			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
@@ -257,17 +260,17 @@
 			status = "disabled";
 		};
 
-		mailbox: mailbox@25000 {
+		mailbox: mailbox@25c00 {
 			compatible = "brcm,iproc-fa2-mbox";
-			reg = <0x25000 0x445>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x25c00 0x400>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 			dma-coherent;
 		};
 
-		nand: nand@26000 {
+		nand_controller: nand-controller@26000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x026000 0x600>,
 			      <0x11b408 0x600>,
@@ -282,7 +285,7 @@
 		};
 
 		qspi: spi@27200 {
-			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
 			      <0x11c408 0x004>,
@@ -308,6 +311,7 @@
 			num-cs = <2>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 
 		xhci: usb@29000 {
@@ -349,6 +353,7 @@
 			gpio-controller;
 			ngpios = <4>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -360,13 +365,49 @@
 			status = "disabled";
 		};
 
+		mdio: mdio@32000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x32000 0x8>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+		};
+
+		mdio-mux@32000 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			reg = <0x32000 0x4>;
+			mux-mask = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mdio-parent-bus = <&mdio>;
+
+			mdio_int: mdio@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb3_phy: usb3-phy@10 {
+					compatible = "brcm,ns-bx-usb3-phy";
+					reg = <0x10>;
+					usb3-dmp-syscon = <&usb3_dmp>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio_ext: mdio@200 {
+				reg = <0x200>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		rng: rng@33000 {
 			compatible = "brcm,bcm-nsp-rng";
 			reg = <0x33000 0x14>;
 		};
 
 		ccbtimer0: timer@34000 {
-			compatible = "arm,sp804";
+			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x34000 0x1000>;
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
@@ -375,7 +416,7 @@
 		};
 
 		ccbtimer1: timer@35000 {
-			compatible = "arm,sp804";
+			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x35000 0x1000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -383,12 +424,12 @@
 			clock-names = "apb_pclk";
 		};
 
-		srab: srab@36000 {
+		srab: ethernet-switch@36000 {
 			compatible = "brcm,nsp-srab";
 			reg = <0x36000 0x1000>,
 			      <0x3f308 0x8>,
 			      <0x3f410 0xc>;
-			reg-names = "srab", "mux_config", "sgmii";
+			reg-names = "srab", "mux_config", "sgmii_config";
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
@@ -418,6 +459,10 @@
 			status = "disabled";
 
 			/* ports are defined in board DTS */
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		i2c0: i2c@38000 {
@@ -436,7 +481,7 @@
 			reg = <0x39000 0x1000>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&iprocslow>, <&iprocslow>;
-			clock-names = "wdogclk", "apb_pclk";
+			clock-names = "wdog_clk", "apb_pclk";
 		};
 
 		lcpll0: lcpll0@3f100 {
@@ -491,7 +536,7 @@
 			};
 		};
 
-		sata: ahci@41000 {
+		sata: sata@41000 {
 			compatible = "brcm,bcm-nsp-ahci";
 			reg-names = "ahci", "top-ctrl";
 			reg = <0x41000 0x1000>, <0x40020 0x1c>;
@@ -514,13 +559,8 @@
 			};
 		};
 
-		usb3_phy: usb3-phy@104000 {
-			compatible = "brcm,ns-bx-usb3-phy";
-			reg = <0x104000 0x1000>,
-			      <0x032000 0x1000>;
-			reg-names = "dmp", "ccb-mii";
-			#phy-cells = <0>;
-			status = "disabled";
+		usb3_dmp: syscon@104000 {
+			reg = <0x104000 0x1000>;
 		};
 	};
 
@@ -549,7 +589,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi0>;
-		msi0: msi-controller {
+		msi0: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -586,7 +626,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi1>;
-		msi1: msi-controller {
+		msi1: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
@@ -623,7 +663,7 @@
 		status = "disabled";
 
 		msi-parent = <&msi2>;
-		msi2: msi-controller {
+		msi2: msi {
 			compatible = "brcm,iproc-msi";
 			msi-controller;
 			interrupt-parent = <&gic>;
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
index 6197e7d80e3b..53857e572080 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm11351.dtsi
@@ -1,21 +1,10 @@
-/*
- * Copyright (C) 2012-2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2013 Broadcom Corporation
 
+#include <dt-bindings/clock/bcm281xx.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-#include "dt-bindings/clock/bcm281xx.h"
-
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -60,44 +49,44 @@
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
 
-	uart@3e000000 {
+	uartb: serial@3e000000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e000000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>;
 		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e001000 {
+	uartb2: serial@3e001000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e001000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>;
 		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e002000 {
+	uartb3: serial@3e002000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e002000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
-	uart@3e003000 {
+	uartb4: serial@3e003000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
-		status = "disabled";
 		reg = <0x3e003000 0x1000>;
 		clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
+		status = "disabled";
 	};
 
 	L2: l2-cache@3ff20000 {
@@ -122,20 +111,19 @@
 	gpio: gpio@35003000 {
 		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
 		reg = <0x35003000 0x800>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 		#gpio-cells = <2>;
 		#interrupt-cells = <2>;
 		gpio-controller;
 		interrupt-controller;
 	};
 
-	sdio1: sdio@3f180000 {
+	sdio1: mmc@3f180000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f180000 0x10000>;
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -143,7 +131,7 @@
 		status = "disabled";
 	};
 
-	sdio2: sdio@3f190000 {
+	sdio2: mmc@3f190000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f190000 0x10000>;
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -151,7 +139,7 @@
 		status = "disabled";
 	};
 
-	sdio3: sdio@3f1a0000 {
+	sdio3: mmc@3f1a0000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1a0000 0x10000>;
 		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -159,7 +147,7 @@
 		status = "disabled";
 	};
 
-	sdio4: sdio@3f1b0000 {
+	sdio4: mmc@3f1b0000 {
 		compatible = "brcm,kona-sdhci";
 		reg = <0x3f1b0000 0x10000>;
 		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -172,7 +160,7 @@
 		reg = <0x35004800 0x430>;
 	};
 
-	i2c@3e016000 {
+	bsc1: i2c@3e016000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e016000 0x80>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
@@ -182,7 +170,7 @@
 		status = "disabled";
 	};
 
-	i2c@3e017000 {
+	bsc2: i2c@3e017000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e017000 0x80>;
 		interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
@@ -192,7 +180,7 @@
 		status = "disabled";
 	};
 
-	i2c@3e018000 {
+	bsc3: i2c@3e018000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3e018000 0x80>;
 		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
@@ -202,7 +190,7 @@
 		status = "disabled";
 	};
 
-	i2c@3500d000 {
+	pmu_bsc: i2c@3500d000 {
 		compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
 		reg = <0x3500d000 0x80>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
new file mode 100644
index 000000000000..4f8ddc1b3ab7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm21664-garnet.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm21664.dtsi"
+
+/ {
+	model = "BCM21664 Garnet board";
+	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};
+
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm21664.dtsi b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
new file mode 100644
index 000000000000..f0d0300079b6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm21664.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
+
+#include "bcm2166x-common.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+		};
+	};
+};
+
+&apps {
+		gic: interrupt-controller@1c01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01c01000 0x1000>,
+				  <0x01c00100 0x100>;
+		};
+
+		L2: cache-controller@1c20000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x01c20000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+};
+
+&bsc1 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc2 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc3 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&bsc4 {
+	compatible = "brcm,bcm21664-i2c", "brcm,kona-i2c";
+};
+
+&gpio {
+	compatible = "brcm,bcm21664-gpio", "brcm,kona-gpio";
+};
+
+&smc {
+	compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
new file mode 100644
index 000000000000..f535212cb52f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2166x-common.dtsi
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common device tree for components shared between the BCM21664 and BCM23550
+ * SoCs.
+ *
+ * Copyright (C) 2016 Broadcom
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/clock/bcm21664.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* Hub bus */
+	hub: hub-bus@34000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x34000000 0x102f83ac>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		smc: smc@4e000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
+		};
+
+		resetmgr: reset-controller@1001f00 {
+			compatible = "brcm,bcm21664-resetmgr";
+			reg = <0x01001f00 0x24>;
+		};
+
+		gpio: gpio@1003000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x01003000 0x524>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+		};
+
+		pinctrl: pinctrl@1004800 {
+			compatible = "brcm,bcm21664-pinctrl";
+			reg = <0x01004800 0x7f4>;
+		};
+
+		timer@1006000 {
+			compatible = "brcm,kona-timer";
+			reg = <0x01006000 0x1c>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+		};
+	};
+
+	/* Slaves bus */
+	slaves: slaves-bus@3e000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e000000 0x0001c070>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uartb: serial@0 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00000000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uartb2: serial@1000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00001000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uartb3: serial@2000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x00002000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		bsc1: i2c@16000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00016000 0x70>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+			status = "disabled";
+		};
+
+		bsc2: i2c@17000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00017000 0x70>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+			status = "disabled";
+		};
+
+		bsc3: i2c@18000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x00018000 0x70>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+			status = "disabled";
+		};
+
+		bsc4: i2c@1c000 {
+			/* Compatible filled by SoC DTSI */
+			reg = <0x0001c000 0x70>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+			status = "disabled";
+		};
+	};
+
+	/* Apps bus */
+	apps: apps-bus@3e300000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e300000 0x01c02000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usbotg: usb@e20000 {
+			compatible = "snps,dwc2";
+			reg = <0x00e20000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_otg_ahb_clk>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e30000 {
+			compatible = "brcm,kona-usb2-phy";
+			reg = <0x00e30000 0x28>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sdio1: mmc@e80000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e80000 0x801c>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+			status = "disabled";
+		};
+
+		sdio2: mmc@e90000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e90000 0x801c>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+			status = "disabled";
+		};
+
+		sdio3: mmc@ea0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00ea0000 0x801c>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+			status = "disabled";
+		};
+
+		sdio4: mmc@eb0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00eb0000 0x801c>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu@35001000 {
+			compatible = "brcm,bcm21664-root-ccu";
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = "brcm,bcm21664-aon-ccu";
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = "brcm,bcm21664-slave-ccu";
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = "brcm,bcm21664-master-ccu";
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+	};
+};
+
+#include "bcm2166x-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi b/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
new file mode 100644
index 000000000000..51b8730c8fee
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2166x-pinctrl.dtsi
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Common pinmux configrations for BCM2166x (BCM21664/BCM23550).
+ *
+ * Copyright (C) 2025 Artur Weber <aweber.kernel@gmail.com>
+ */
+
+&pinctrl {
+	/* BSC1 */
+	bsc1_pins: bsc1-pins {
+		bsc1clk-grp0 {
+			pins = "bsc1clk";
+			function = "alt1"; /* BSC1CLK */
+		};
+
+		bsc1dat-grp0 {
+			pins = "bsc1dat";
+			function = "alt1"; /* BSC1DAT */
+		};
+	};
+
+	/* BSC2 */
+	bsc2_pins: bsc2-pins {
+		bsc2clk-grp0 {
+			pins = "gpio16";
+			function = "alt2"; /* BSC2CLK */
+		};
+
+		bsc2dat-grp0 {
+			pins = "gpio17";
+			function = "alt2"; /* BSC2DAT */
+		};
+	};
+
+	/* BSC3 */
+	bsc3_pins: bsc3-pins {
+		bsc3clk-grp0 {
+			pins = "lcdscl";
+			function = "alt1"; /* BSC3_CLK */
+		};
+
+		bsc3dat-grp0 {
+			pins = "lcdsda";
+			function = "alt1"; /* BSC3_SDA */
+		};
+	};
+
+	/* BSC4 */
+	bsc4_pins: bsc4-pins {
+		bsc4clk-grp0 {
+			pins = "lcdres";
+			function = "alt1"; /* BSC4_CLK */
+		};
+
+		bsc4dat-grp0 {
+			pins = "lcdte";
+			function = "alt1"; /* BSC4_SDA */
+		};
+	};
+
+	/* PMBSC */
+	pmbsc_pins: pmbsc-pins {
+		pmbscclk-grp0 {
+			pins = "pmbscclk";
+			function = "alt1"; /* PMBSCCLK */
+		};
+
+		pmbscdat-grp0 {
+			pins = "pmbscdat";
+			function = "alt1"; /* PMBSCDAT */
+		};
+	};
+
+	/* SD */
+	sd_width1_pins: sd-width1-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	sd_width4_pins: sd-width4-pins {
+		sdck-grp0 {
+			pins = "sdck";
+			function = "alt1"; /* SDCK */
+			bias-disable;
+		};
+
+		sdcmd-grp0 {
+			pins = "sdcmd";
+			function = "alt1"; /* SDCMD */
+			bias-pull-up;
+		};
+
+		sddat-grp0 {
+			pins = "sddat0", "sddat1", "sddat2", "sddat3";
+			function = "alt1"; /* SDDATx */
+			bias-pull-up;
+		};
+	};
+
+	/* SD1 */
+	sd1_width1_pins: sd1-width1-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+	};
+
+	sd1_width4_pins: sd1-width4-pins {
+		sd1ck-grp0 {
+			pins = "mmc1dat7";
+			function = "alt6"; /* SD1CK */
+			bias-disable;
+		};
+
+		sd1cmd-grp0 {
+			pins = "spi0txd";
+			function = "alt2"; /* SD1CMD */
+			bias-pull-up;
+		};
+
+		sd1dat0-grp0 {
+			pins = "mmc1dat5";
+			function = "alt6"; /* SD1DAT0 */
+			bias-pull-up;
+		};
+
+		sd1dat1-grp0 {
+			pins = "gpio93";
+			function = "alt1"; /* SD1DAT1 */
+			bias-pull-up;
+		};
+
+		sd1dat2-grp0 {
+			pins = "gpio94";
+			function = "alt1"; /* SD1DAT2 */
+			bias-pull-up;
+		};
+
+		sd1dat3-grp0 {
+			pins = "mmc1dat3";
+			function = "alt6"; /* SD1DAT3 */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC0 */
+	mmc0_width1_pins: mmc0-width1-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width4_pins: mmc0-width4-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc0_width8_pins: mmc0-width8-pins {
+		mmc0ck-grp0 {
+			pins = "mmc0ck";
+			function = "alt1"; /* MMC0CK */
+			bias-disable;
+		};
+
+		mmc0cmd-grp0 {
+			pins = "mmc0cmd";
+			function = "alt1"; /* MMC0CMD */
+			bias-pull-up;
+		};
+
+		mmc0dat-grp0 {
+			pins = "mmc0dat0", "mmc0dat1", "mmc0dat2", "mmc0dat3",
+			       "mmc0dat4", "mmc0dat5", "mmc0dat6", "mmc0dat7";
+			function = "alt1"; /* MMC0DATx */
+			bias-pull-up;
+		};
+	};
+
+	/* MMC1 */
+	mmc1_width1_pins: mmc1-width1-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width4_pins: mmc1-width4-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+
+	mmc1_width8_pins: mmc1-width8-pins {
+		mmc1ck-grp0 {
+			pins = "mmc1ck";
+			function = "alt1"; /* MMC1CK */
+			bias-disable;
+		};
+
+		mmc1cmd-grp0 {
+			pins = "mmc1cmd";
+			function = "alt1"; /* MMC1CMD */
+			bias-pull-up;
+		};
+
+		mmc1dat-grp0 {
+			pins = "mmc1dat0", "mmc1dat1", "mmc1dat2", "mmc1dat3",
+			       "mmc1dat4", "mmc1dat5", "mmc1dat6", "mmc1dat7";
+			function = "alt1"; /* MMC1DATx */
+			bias-pull-up;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/broadcom/bcm23550-sparrow.dts
index ace77709f468..ace77709f468 100644
--- a/arch/arm/boot/dts/bcm23550-sparrow.dts
+++ b/arch/arm/boot/dts/broadcom/bcm23550-sparrow.dts
diff --git a/arch/arm/boot/dts/broadcom/bcm23550.dtsi b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
new file mode 100644
index 000000000000..c1c69381286b
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm23550.dtsi
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Device tree for the BCM23550 SoC.
+ *
+ * Copyright (C) 2016 Broadcom
+ */
+
+#include "bcm2166x-common.dtsi"
+
+/ {
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <2>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <3>;
+			clock-frequency = <1000000000>;
+		};
+	};
+};
+
+&apps {
+		cdc: cdc@1b0e000 {
+			compatible = "brcm,bcm23550-cdc";
+			reg = <0x01b0e000 0x78>;
+		};
+
+		gic: interrupt-controller@1b21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01b21000 0x1000>,
+			      <0x01b22000 0x1000>;
+		};
+};
+
+&bsc1 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc2 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc3 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&bsc4 {
+	compatible = "brcm,bcm23550-i2c", "brcm,kona-i2c";
+};
+
+&gpio {
+	compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
+};
+
+&smc {
+	compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
new file mode 100644
index 000000000000..353bb50ce542
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-4-b.dts
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-peripheral.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
+	model = "Raspberry Pi 4 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	cam1_reg: regulator-cam1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam1-reg";
+		enable-active-high;
+		gpio = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: regulator-sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",		/*  0 */
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",		/*  5 */
+			  "SD_PWR_ON",
+			  "";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",		/*  0 */
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",		/*  5 */
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",		/* 10 */
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",		/* 15 */
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",		/* 20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",		/* 25 */
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",		/* 30 */
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",		/* 35 */
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",		/* 40 */
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",		/* 45 */
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",		/* 50 */
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",		/* 55 */
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led_pwr: led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
+	status = "okay";
+};
+
+/* EMMC2 is used to drive the SD card */
+&emmc2 {
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	status = "okay";
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@1 {
+		/* No PHY interrupt */
+		reg = <0x1>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* LED1 */
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			/* LED2 */
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
+&pcie0 {
+	pci@0,0 {
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		reg = <0 0 0 0 0>;
+
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
+			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
+		};
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
new file mode 100644
index 000000000000..ca9be91b4f36
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711-rpi-4-b.dts"
+
+/ {
+	compatible = "raspberrypi,400", "brcm,bcm2711";
+	model = "Raspberry Pi 400";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "GLOBAL_SHUTDOWN",
+			  "SD_PWR_ON",
+			  "SHUTDOWN_REQUEST";
+};
+
+&genet_mdio {
+	clock-frequency = <1950000>;
+	/delete-node/ leds;
+};
+
+&led_pwr {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+/delete-node/ &led_act;
+
+&pm {
+	/delete-property/ system-power-controller;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
new file mode 100644
index 000000000000..6bc77dd48c0d
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include <dt-bindings/leds/common.h>
+#include "bcm2711-rpi-cm4.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	model = "Raspberry Pi Compute Module 4 IO Board";
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&genet {
+	status = "okay";
+};
+
+&i2c0_1 {
+	rtc@51 {
+		/* Attention: An alarm resets the machine */
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+};
+
+&phy1 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LED2 */
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/* LED3 */
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi
new file mode 100644
index 000000000000..48e63ab7848c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-cm4.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: regulator-sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+/* EMMC2 is used to drive the eMMC */
+&emmc2 {
+	bus-width = <8>;
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	/* Even the IP block is limited to 100 MHz
+	 * this provides a throughput gain
+	 */
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "ANT1",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",
+			  "SD_PWR_ON",
+			  "ANT2";
+
+	ant1: ant1-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>;
+		/* internal antenna enabled */
+		output-high;
+		line-name = "ant1";
+	};
+
+	ant2: ant2-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+		/* external antenna disabled */
+		output-low;
+		line-name = "ant2";
+	};
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@0 {
+		/* No PHY interrupt */
+		reg = <0x0>;
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
new file mode 100644
index 000000000000..c78ed064d166
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0>;
+	};
+
+	aliases {
+		emmc2bus = &emmc2bus;
+		ethernet0 = &genet;
+		pcie0 = &pcie0;
+		blconfig = &blconfig;
+	};
+
+	i2c0mux: i2c-mux0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c0>;
+
+		pinctrl-names = "i2c0", "i2c0-vc";
+		pinctrl-0 = <&i2c0_gpio0>;
+		pinctrl-1 = <&i2c0_gpio44>;
+
+		i2c0_0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c0_1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+
+	reset: reset {
+		compatible = "raspberrypi,firmware-reset";
+		#reset-cells = <1>;
+	};
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>;
+};
+
+&i2c0 {
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
+&rmem {
+	/*
+	 * RPi4's co-processor will copy the board's bootloader configuration
+	 * into memory for the OS to consume. It'll also update this node with
+	 * its placement information.
+	 */
+	blconfig: nvram@0 {
+		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x0>;
+		no-map;
+		status = "disabled";
+	};
+};
+
+&v3d {
+	clocks = <&firmware_clocks 5>;
+};
+
+&vchiq {
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
new file mode 100644
index 000000000000..c06d9f5e53c8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -0,0 +1,1194 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/ {
+	compatible = "brcm,bcm2711";
+
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gicv2>;
+
+	vc4: gpu {
+		compatible = "brcm,bcm2711-vc5";
+		status = "disabled";
+	};
+
+	clk_27MHz: clk-27M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "27MHz-clock";
+	};
+
+	clk_108MHz: clk-108M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <108000000>;
+		clock-output-names = "108MHz-clock";
+	};
+
+	soc {
+		/*
+		 * Defined ranges:
+		 *   Common BCM283x peripherals
+		 *   BCM2711-specific peripherals
+		 *   ARM-local peripherals
+		 */
+		ranges = <0x7e000000  0x0 0xfe000000  0x01800000>,
+			 <0x7c000000  0x0 0xfc000000  0x02000000>,
+			 <0x40000000  0x0 0xff800000  0x00800000>;
+		/* Emulate a contiguous 30-bit address range for DMA */
+		dma-ranges = <0xc0000000  0x0 0x00000000  0x40000000>;
+
+		/*
+		 * This node is the provider for the enable-method for
+		 * bringing up secondary cores.
+		 */
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+		};
+
+		gicv2: interrupt-controller@40041000 {
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "arm,gic-400";
+			reg =	<0x40041000 0x1000>,
+				<0x40042000 0x2000>,
+				<0x40044000 0x2000>,
+				<0x40046000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		avs_monitor: avs-monitor@7d5d2000 {
+			compatible = "brcm,bcm2711-avs-monitor",
+				     "syscon", "simple-mfd";
+			reg = <0x7d5d2000 0xf00>;
+
+			thermal: thermal {
+				compatible = "brcm,bcm2711-thermal";
+				#thermal-sensor-cells = <0>;
+			};
+		};
+
+		dma: dma-controller@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xb00>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     /* DMA lite 7 - 10 */
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x07f5>;
+		};
+
+		pm: watchdog@7e100000 {
+			compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>,
+			      <0x7ec11000 0x20>;
+			reg-names = "pm", "asb", "rpivid_asb";
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2711-rng200";
+			reg = <0x7e104000 0x28>;
+		};
+
+		uart2: serial@7e201400 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201400 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00341011>;
+			status = "disabled";
+		};
+
+		uart3: serial@7e201600 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201600 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00341011>;
+			status = "disabled";
+		};
+
+		uart4: serial@7e201800 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201800 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00341011>;
+			status = "disabled";
+		};
+
+		uart5: serial@7e201a00 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201a00 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00341011>;
+			status = "disabled";
+		};
+
+		spi3: spi@7e204600 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204600 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@7e204800 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204800 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi5: spi@7e204a00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204a00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi6: spi@7e204c00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204c00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@7e205600 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205600 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@7e205800 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205800 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@7e205a00 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205a00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@7e205c00 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205c00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pixelvalve0: pixelvalve@7e206000 {
+			compatible = "brcm,bcm2711-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve1: pixelvalve@7e207000 {
+			compatible = "brcm,bcm2711-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve2: pixelvalve@7e20a000 {
+			compatible = "brcm,bcm2711-pixelvalve2";
+			reg = <0x7e20a000 0x100>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@7e20c800 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c800 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pixelvalve4: pixelvalve@7e216000 {
+			compatible = "brcm,bcm2711-pixelvalve4";
+			reg = <0x7e216000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		hvs: hvs@7e400000 {
+			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pixelvalve3: pixelvalve@7ec12000 {
+			compatible = "brcm,bcm2711-pixelvalve3";
+			reg = <0x7ec12000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vec: vec@7ec13000 {
+			compatible = "brcm,bcm2711-vec";
+			reg = <0x7ec13000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		dvp: clock@7ef00000 {
+			compatible = "brcm,brcm2711-dvp";
+			reg = <0x7ef00000 0x10>;
+			clocks = <&clk_108MHz>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		aon_intr: interrupt-controller@7ef00100 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7ef00100 0x30>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		hdmi0: hdmi@7ef00700 {
+			compatible = "brcm,bcm2711-hdmi0";
+			reg = <0x7ef00700 0x300>,
+			      <0x7ef00300 0x200>,
+			      <0x7ef00f00 0x80>,
+			      <0x7ef00f80 0x80>,
+			      <0x7ef01b00 0x200>,
+			      <0x7ef01f00 0x400>,
+			      <0x7ef00200 0x80>,
+			      <0x7ef04300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			clock-names = "hdmi", "bvb", "audio", "cec";
+			resets = <&dvp 0>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <0>, <1>, <2>,
+				     <3>, <4>, <5>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "wakeup", "hpd-connected", "hpd-removed";
+			ddc = <&ddc0>;
+			dmas = <&dma 10>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc0: i2c@7ef04500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <97500>;
+			status = "disabled";
+		};
+
+		hdmi1: hdmi@7ef05700 {
+			compatible = "brcm,bcm2711-hdmi1";
+			reg = <0x7ef05700 0x300>,
+			      <0x7ef05300 0x200>,
+			      <0x7ef05f00 0x80>,
+			      <0x7ef05f80 0x80>,
+			      <0x7ef06b00 0x200>,
+			      <0x7ef06f00 0x400>,
+			      <0x7ef00280 0x80>,
+			      <0x7ef09300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			ddc = <&ddc1>;
+			clock-names = "hdmi", "bvb", "audio", "cec";
+			resets = <&dvp 1>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <8>, <7>, <6>,
+				     <9>, <10>, <11>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "wakeup", "hpd-connected", "hpd-removed";
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc1: i2c@7ef09500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <97500>;
+			status = "disabled";
+		};
+	};
+
+	/*
+	 * emmc2 has different DMA constraints based on SoC revisions. It was
+	 * moved into its own bus, so as for RPi4's firmware to update them.
+	 * The firmware will find whether the emmc2bus alias is defined, and if
+	 * so, it'll edit the dma-ranges property below accordingly.
+	 */
+	emmc2bus: emmc2bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
+		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
+
+		emmc2: mmc@7e340000 {
+			compatible = "brcm,bcm2711-emmc2";
+			reg = <0x0 0x7e340000 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2711_CLOCK_EMMC2>;
+			status = "disabled";
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
+		};
+	};
+
+	scb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
+
+		pcie0: pcie@7d500000 {
+			compatible = "brcm,bcm2711-pcie";
+			reg = <0x0 0x7d500000 0x9310>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
+							IRQ_TYPE_LEVEL_HIGH>;
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+				  0x0 0x04000000>;
+			/*
+			 * The wrapper around the PCIe block has a bug
+			 * preventing it from accessing beyond the first 3GB of
+			 * memory.
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+				      0x0 0xc0000000>;
+			brcm,enable-ssc;
+		};
+
+		genet: ethernet@7d580000 {
+			compatible = "brcm,bcm2711-genet-v5";
+			reg = <0x0 0x7d580000 0x10000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			genet_mdio: mdio@e14 {
+				compatible = "brcm,genet-mdio-v5";
+				reg = <0xe14 0x8>;
+				reg-names = "mdio";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+			};
+		};
+
+		xhci: usb@7e9c0000 {
+			compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
+			reg = <0x0 0x7e9c0000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pm BCM2835_POWER_DOMAIN_USB>;
+			/* DWC2 and this IP block share the same USB PHY,
+			 * enabling both at the same time results in lockups.
+			 * So keep this node disabled and let the bootloader
+			 * decide which interface should be enabled.
+			 */
+			status = "disabled";
+		};
+
+		v3d: gpu@7ec00000 {
+			compatible = "brcm,2711-v3d";
+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
+
+&clk_osc {
+	clock-frequency = <54000000>;
+};
+
+&clocks {
+	compatible = "brcm,bcm2711-cprman";
+};
+
+&cpu_thermal {
+	coefficients = <(-487) 410040>;
+	thermal-sensors = <&thermal>;
+};
+
+&dsi0 {
+	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&dsi1 {
+	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+	compatible = "brcm,bcm2711-dsi1";
+};
+
+&gpio {
+	compatible = "brcm,bcm2711-gpio";
+	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+
+	gpio-ranges = <&gpio 0 0 58>;
+
+	gpclk0_gpio49: gpclk0-gpio49 {
+		pin-gpclk {
+			pins = "gpio49";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	gpclk1_gpio50: gpclk1-gpio50 {
+		pin-gpclk {
+			pins = "gpio50";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	gpclk2_gpio51: gpclk2-gpio51 {
+		pin-gpclk {
+			pins = "gpio51";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+
+	i2c0_gpio46: i2c0-gpio46 {
+		pin-sda {
+			function = "alt0";
+			pins = "gpio46";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt0";
+			pins = "gpio47";
+			bias-disable;
+		};
+	};
+	i2c1_gpio46: i2c1-gpio46 {
+		pin-sda {
+			function = "alt1";
+			pins = "gpio46";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt1";
+			pins = "gpio47";
+			bias-disable;
+		};
+	};
+	i2c3_gpio2: i2c3-gpio2 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio2";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio3";
+			bias-disable;
+		};
+	};
+	i2c3_gpio4: i2c3-gpio4 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio4";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio5";
+			bias-disable;
+		};
+	};
+	i2c4_gpio6: i2c4-gpio6 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio6";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio7";
+			bias-disable;
+		};
+	};
+	i2c4_gpio8: i2c4-gpio8 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio8";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio9";
+			bias-disable;
+		};
+	};
+	i2c5_gpio10: i2c5-gpio10 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio10";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio11";
+			bias-disable;
+		};
+	};
+	i2c5_gpio12: i2c5-gpio12 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio12";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio13";
+			bias-disable;
+		};
+	};
+	i2c6_gpio0: i2c6-gpio0 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio0";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio1";
+			bias-disable;
+		};
+	};
+	i2c6_gpio22: i2c6-gpio22 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio22";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio23";
+			bias-disable;
+		};
+	};
+	i2c_slave_gpio8: i2c-slave-gpio8 {
+		pins-i2c-slave {
+			pins = "gpio8",
+			       "gpio9",
+			       "gpio10",
+			       "gpio11";
+			function = "alt3";
+		};
+	};
+
+	jtag_gpio48: jtag-gpio48 {
+		pins-jtag {
+			pins = "gpio48",
+			       "gpio49",
+			       "gpio50",
+			       "gpio51",
+			       "gpio52",
+			       "gpio53";
+			function = "alt4";
+		};
+	};
+
+	mii_gpio28: mii-gpio28 {
+		pins-mii {
+			pins = "gpio28",
+			       "gpio29",
+			       "gpio30",
+			       "gpio31";
+			function = "alt4";
+		};
+	};
+	mii_gpio36: mii-gpio36 {
+		pins-mii {
+			pins = "gpio36",
+			       "gpio37",
+			       "gpio38",
+			       "gpio39";
+			function = "alt5";
+		};
+	};
+
+	pcm_gpio50: pcm-gpio50 {
+		pins-pcm {
+			pins = "gpio50",
+			       "gpio51",
+			       "gpio52",
+			       "gpio53";
+			function = "alt2";
+		};
+	};
+
+	pwm0_0_gpio12: pwm0-0-gpio12 {
+		pin-pwm {
+			pins = "gpio12";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_0_gpio18: pwm0-0-gpio18 {
+		pin-pwm {
+			pins = "gpio18";
+			function = "alt5";
+			bias-disable;
+		};
+	};
+	pwm1_0_gpio40: pwm1-0-gpio40 {
+		pin-pwm {
+			pins = "gpio40";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio13: pwm0-1-gpio13 {
+		pin-pwm {
+			pins = "gpio13";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio19: pwm0-1-gpio19 {
+		pin-pwm {
+			pins = "gpio19";
+			function = "alt5";
+			bias-disable;
+		};
+	};
+	pwm1_1_gpio41: pwm1-1-gpio41 {
+		pin-pwm {
+			pins = "gpio41";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio45: pwm0-1-gpio45 {
+		pin-pwm {
+			pins = "gpio45";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_0_gpio52: pwm0-0-gpio52 {
+		pin-pwm {
+			pins = "gpio52";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio53: pwm0-1-gpio53 {
+		pin-pwm {
+			pins = "gpio53";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+
+	rgmii_gpio35: rgmii-gpio35 {
+		pin-start-stop {
+			pins = "gpio35";
+			function = "alt4";
+		};
+		pin-rx-ok {
+			pins = "gpio36";
+			function = "alt4";
+		};
+	};
+	rgmii_irq_gpio34: rgmii-irq-gpio34 {
+		pin-irq {
+			pins = "gpio34";
+			function = "alt5";
+		};
+	};
+	rgmii_irq_gpio39: rgmii-irq-gpio39 {
+		pin-irq {
+			pins = "gpio39";
+			function = "alt4";
+		};
+	};
+	rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
+		pins-mdio {
+			pins = "gpio28",
+			       "gpio29";
+			function = "alt5";
+		};
+	};
+	rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
+		pins-mdio {
+			pins = "gpio37",
+			       "gpio38";
+			function = "alt4";
+		};
+	};
+
+	spi0_gpio46: spi0-gpio46 {
+		pins-spi {
+			pins = "gpio46",
+			       "gpio47",
+			       "gpio48",
+			       "gpio49";
+			function = "alt2";
+		};
+	};
+	spi2_gpio46: spi2-gpio46 {
+		pins-spi {
+			pins = "gpio46",
+			       "gpio47",
+			       "gpio48",
+			       "gpio49",
+			       "gpio50";
+			function = "alt5";
+		};
+	};
+	spi3_gpio0: spi3-gpio0 {
+		pins-spi {
+			pins = "gpio0",
+			       "gpio1",
+			       "gpio2",
+			       "gpio3";
+			function = "alt3";
+		};
+	};
+	spi4_gpio4: spi4-gpio4 {
+		pins-spi {
+			pins = "gpio4",
+			       "gpio5",
+			       "gpio6",
+			       "gpio7";
+			function = "alt3";
+		};
+	};
+	spi5_gpio12: spi5-gpio12 {
+		pins-spi {
+			pins = "gpio12",
+			       "gpio13",
+			       "gpio14",
+			       "gpio15";
+			function = "alt3";
+		};
+	};
+	spi6_gpio18: spi6-gpio18 {
+		pins-spi {
+			pins = "gpio18",
+			       "gpio19",
+			       "gpio20",
+			       "gpio21";
+			function = "alt3";
+		};
+	};
+
+	uart2_gpio0: uart2-gpio0 {
+		pin-tx {
+			pins = "gpio0";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio1";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
+		pin-cts {
+			pins = "gpio2";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio3";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart3_gpio4: uart3-gpio4 {
+		pin-tx {
+			pins = "gpio4";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio5";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
+		pin-cts {
+			pins = "gpio6";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio7";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart4_gpio8: uart4-gpio8 {
+		pin-tx {
+			pins = "gpio8";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio9";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
+		pin-cts {
+			pins = "gpio10";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio11";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart5_gpio12: uart5-gpio12 {
+		pin-tx {
+			pins = "gpio12";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio13";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
+		pin-cts {
+			pins = "gpio14";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio15";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+};
+
+&rmem {
+	#address-cells = <2>;
+};
+
+&csi0 {
+	interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&csi1 {
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cma {
+	/*
+	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
+	 * that's not good enough for the BCM2711 as some devices can
+	 * only address the lower 1G of memory (ZONE_DMA).
+	 */
+	alloc-ranges = <0x0 0x00000000 0x40000000>;
+};
+
+&i2c0 {
+	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mailbox {
+	interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdhci {
+	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdhost {
+	interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi {
+	interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi2 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&system_timer {
+	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&txp {
+	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+	arm,primecell-periphid = <0x00341011>;
+	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&vec {
+	compatible = "brcm,bcm2711-vec";
+	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm28155-ap.dts b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
new file mode 100644
index 000000000000..cefaa9a3c45c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm28155-ap.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Broadcom Corporation
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm11351.dtsi"
+
+/ {
+	model = "BCM28155 AP board";
+	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+};
+
+&bsc1 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&bsc2 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&bsc3 {
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&pmu_bsc {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmu: pmu@8 {
+		compatible = "brcm,bcm59056";
+		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+		reg = <0x08>;
+
+		regulators {
+			camldo1_reg: camldo1 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			sdldo_reg: sdldo {
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			sdxldo_reg: sdxldo {
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			usbldo_reg: usbldo {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			iosr1_reg: iosr1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	vmmc-supply = <&camldo1_reg>;
+	vqmmc-supply = <&iosr1_reg>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&sdldo_reg>;
+	vqmmc-supply = <&sdxldo_reg>;
+	status = "okay";
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	vusb_d-supply = <&usbldo_reg>;
+	vusb_a-supply = <&iosr1_reg>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
new file mode 100644
index 000000000000..9261b67dbee1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations.
+ */
+
+/ {
+	interrupt-parent = <&intc>;
+
+	soc {
+		dma: dma-controller@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     /* dma channel 11-14 share one irq */
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     /* unused shared irq for all channels */
+				     <1 28>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10",
+					  "dma11",
+					  "dma12",
+					  "dma13",
+					  "dma14",
+					  "dma-shared-all";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm: watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>;
+			reg-names = "pm", "asb";
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+			interrupts = <2 29>;
+		};
+
+		pixelvalve@7e206000 {
+			compatible = "brcm,bcm2835-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <2 13>; /* pwa0 */
+		};
+
+		pixelvalve@7e207000 {
+			compatible = "brcm,bcm2835-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <2 14>; /* pwa1 */
+		};
+
+		thermal: thermal@7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+		};
+
+		vec: vec@7e806000 {
+			compatible = "brcm,bcm2835-vec";
+			reg = <0x7e806000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <2 27>;
+			status = "disabled";
+		};
+
+		pixelvalve@7e807000 {
+			compatible = "brcm,bcm2835-pixelvalve2";
+			reg = <0x7e807000 0x100>;
+			interrupts = <2 10>; /* pixelvalve */
+		};
+
+		hdmi: hdmi@7e902000 {
+			compatible = "brcm,bcm2835-hdmi";
+			reg = <0x7e902000 0x600>,
+			      <0x7e808000 0x100>;
+			interrupts = <2 8>, <2 9>;
+			ddc = <&i2c2>;
+			clocks = <&clocks BCM2835_PLLH_PIX>,
+				 <&clocks BCM2835_CLOCK_HSM>;
+			clock-names = "pixel", "hdmi";
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		v3d: v3d@7ec00000 {
+			compatible = "brcm,bcm2835-v3d";
+			reg = <0x7ec00000 0x1000>;
+			interrupts = <1 10>;
+		};
+
+		vc4: gpu {
+			compatible = "brcm,bcm2835-vc4";
+		};
+	};
+};
+
+&cpu_thermal {
+	thermal-sensors = <&thermal>;
+};
+
+&gpio {
+	i2c_slave_gpio18: i2c-slave-gpio18 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	jtag_gpio4: jtag-gpio4 {
+		brcm,pins = <4 5 6 12 13>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+
+	pwm0_gpio12: pwm0-gpio12 {
+		brcm,pins = <12>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm0_gpio18: pwm0-gpio18 {
+		brcm,pins = <18>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	pwm0_gpio40: pwm0-gpio40 {
+		brcm,pins = <40>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio13: pwm1-gpio13 {
+		brcm,pins = <13>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio19: pwm1-gpio19 {
+		brcm,pins = <19>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	pwm1_gpio41: pwm1-gpio41 {
+		brcm,pins = <41>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio45: pwm1-gpio45 {
+		brcm,pins = <45>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2s {
+	dmas = <&dma 2>, <&dma 3>;
+	dma-names = "tx", "rx";
+};
+
+&sdhost {
+	dmas = <&dma 13>;
+	dma-names = "rx-tx";
+};
+
+&spi {
+	dmas = <&dma 6>, <&dma 7>;
+	dma-names = "tx", "rx";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
index 6c8ce39833bf..069b48272aa5 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -32,7 +21,6 @@
 	 * This is based on the unreleased schematic for the Model A+.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -67,21 +55,21 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
 			  "PWR_LOW_N", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
 			  "USB_LIMIT", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
@@ -93,6 +81,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -108,6 +97,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
index 17fdd48346ff..2726c00431e8 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-a.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
 / {
@@ -12,12 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -26,7 +22,6 @@
 	 * RPI00021 sheet 02
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -42,41 +37,41 @@
 			  "SPI_MISO",
 			  "SPI_MOSI",
 			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
 			  /* Serial port */
 			  "TXD0",
 			  "RXD0",
 			  "STATUS_LED_N",
 			  "GPIO17",
 			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
 			  "GPIO21",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
-			  "NC", /* GPIO26 */
+			  "", /* GPIO26 */
 			  "CAM_GPIO0",
 			  /* Binary number representing build/revision */
 			  "CONFIG0",
 			  "CONFIG1",
 			  "CONFIG2",
 			  "CONFIG3",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT",
 			  "HDMI_HPD_P",
 			  "SD_CARD_DET",
@@ -88,6 +83,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
 
 	/* I2S interface */
@@ -103,6 +99,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
index b0355c229cdc..c57b999a4520 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-plus.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -34,7 +23,6 @@
 	 * RPI-BPLUS sheet 1
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -69,21 +57,21 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
+			  "", /* GPIO30 */
 			  "LAN_RUN", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
 			  "PWR_LOW_N", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
 			  "USB_LIMIT", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "ETHCLK", /* GPIO44 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "ETH_CLK", /* GPIO44 */
 			  "PWM1_OUT", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
@@ -95,6 +83,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -110,6 +99,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
index 33b3b5c02521..ae6d3a9586ab 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b-rev2.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9512.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,12 +15,6 @@
 		device_type = "memory";
 		reg = <0 0x10000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &gpio {
@@ -27,7 +23,6 @@
 	 * RPI00022 sheet 02
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -43,40 +38,40 @@
 			  "SPI_MISO",
 			  "SPI_MOSI",
 			  "SPI_SCLK",
-			  "NC", /* GPIO12 */
-			  "NC", /* GPIO13 */
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
 			  /* Serial port */
 			  "TXD0",
 			  "RXD0",
 			  "STATUS_LED_N",
 			  "GPIO17",
 			  "GPIO18",
-			  "NC", /* GPIO19 */
-			  "NC", /* GPIO20 */
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
 			  "CAM_GPIO",
 			  "GPIO22",
 			  "GPIO23",
 			  "GPIO24",
 			  "GPIO25",
-			  "NC", /* GPIO26 */
+			  "", /* GPIO26 */
 			  "GPIO27",
 			  "GPIO28",
 			  "GPIO29",
 			  "GPIO30",
 			  "GPIO31",
-			  "NC", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
 			  "PWM0_OUT",
-			  "NC", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
 			  "PWM1_OUT",
 			  "HDMI_HPD_P",
 			  "SD_CARD_DET",
@@ -88,6 +83,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
 
 	/* I2S interface */
@@ -103,6 +99,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
new file mode 100644
index 000000000000..72764be75a79
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-b.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b", "brcm,bcm2835";
+	model = "Raspberry Pi Model B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "CAM_GPIO0",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
index a75c882e6575..3f9d198ac3ab 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1-io1.dts
@@ -13,7 +13,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -74,6 +73,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0>;
 };
 
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi
index 58059c2ce129..750cd76948e3 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-cm1.dtsi
@@ -2,10 +2,12 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 
 / {
 	leds {
-		act {
+		led-act {
 			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 		};
 	};
@@ -32,6 +34,10 @@
 	};
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
 &sdhost {
 	non-removable;
 	vmmc-supply = <&reg_3v3>;
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
new file mode 100644
index 000000000000..8b3c21d9f333
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-common.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&hdmi {
+	clocks = <&firmware_clocks 9>,
+		 <&firmware_clocks 13>;
+	clock-names = "pixel", "hdmi";
+};
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
+
+&vec {
+	clocks = <&firmware_clocks 15>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
new file mode 100644
index 000000000000..1f0b163e400c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero-w.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+	model = "Raspberry Pi Zero W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "CAM_GPIO1", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "CAM_GPIO0", /* GPIO44 */
+			  "BT_ON", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
index 6dd93c6f4966..539c19c10946 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi-zero.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 #include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-otg.dtsi"
 
 / {
@@ -16,12 +18,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &gpio {
@@ -29,7 +25,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -64,22 +59,22 @@
 			  "GPIO27",
 			  "SDA0",
 			  "SCL0",
-			  "NC", /* GPIO30 */
-			  "NC", /* GPIO31 */
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
 			  "CAM_GPIO1", /* GPIO32 */
-			  "NC", /* GPIO33 */
-			  "NC", /* GPIO34 */
-			  "NC", /* GPIO35 */
-			  "NC", /* GPIO36 */
-			  "NC", /* GPIO37 */
-			  "NC", /* GPIO38 */
-			  "NC", /* GPIO39 */
-			  "NC", /* GPIO40 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "", /* GPIO40 */
 			  "CAM_GPIO0", /* GPIO41 */
-			  "NC", /* GPIO42 */
-			  "NC", /* GPIO43 */
-			  "NC", /* GPIO44 */
-			  "NC", /* GPIO45 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "", /* GPIO45 */
 			  "HDMI_HPD_N",
 			  "STATUS_LED_N",
 			  /* Used by SD Card */
@@ -90,6 +85,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -105,6 +101,10 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
 &sdhost {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdhost_gpio48>;
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
new file mode 100644
index 000000000000..e9bf41b9f5c1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
@@ -0,0 +1,84 @@
+#include <dt-bindings/power/raspberrypi-power.h>
+
+/ {
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+			mboxes = <&mailbox>;
+
+			firmware_clocks: clocks {
+				compatible = "raspberrypi,firmware-clocks";
+				#clock-cells = <1>;
+			};
+		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
+
+		vchiq: mailbox@7e00b840 {
+			compatible = "brcm,bcm2835-vchiq";
+			reg = <0x7e00b840 0x3c>;
+			interrupts = <0 2>;
+		};
+	};
+};
+
+&csi0 {
+	clocks = <&clocks BCM2835_CLOCK_CAM0>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
+};
+
+&csi1 {
+	clocks = <&clocks BCM2835_CLOCK_CAM1>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+};
+
+&gpio {
+	gpioout: gpioout {
+		brcm,pins = <6>;
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
+	};
+
+	alt0: alt0 {
+		brcm,pins = <4 5 7 8 9 10 11>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&vec {
+	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
+	status = "okay";
+};
+
+&dsi0 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
+};
+
+&dsi1 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2835.dtsi b/arch/arm/boot/dts/broadcom/bcm2835.dtsi
new file mode 100644
index 000000000000..15cb331febbb
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2835.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2835";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s";
+			reg = <0x0>;
+			/* Source for d/i-cache-line-size and d/i-cache-sets
+			 * https://developer.arm.com/documentation/ddi0301
+			 * /h/level-one-memory-system/cache-organization?lang=en
+			 *
+			 * Source for d/i-cache-size
+			 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+			 *
+			 * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
+			 * It can be shared with the CPU through fw settings,
+			 * but this is not recommended.
+			 */
+			d-cache-size = <0x4000>;
+			d-cache-line-size = <16>;
+			d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+			i-cache-size = <0x4000>;
+			i-cache-line-size = <16>;
+			i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+		};
+	};
+
+	soc {
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
+
+	arm-pmu {
+		compatible = "arm,arm1176-pmu";
+	};
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2835-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
index 0455a680394a..79918033750e 100644
--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2836-rpi-2-b.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 #include "bcm2836.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
 
@@ -13,19 +14,6 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
-	};
 };
 
 &gpio {
@@ -34,7 +22,6 @@
 	 * the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -83,7 +70,7 @@
 			  "CAM_GPIO0",
 			  "SMPS_SCL",
 			  "SMPS_SDA",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "PWM1_OUT",
 			  "HDMI_HPD_N",
 			  "STATUS_LED",
@@ -95,6 +82,7 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
@@ -110,6 +98,19 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
 &pwm {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi
index c4c858b984c6..48b03b55ff56 100644
--- a/arch/arm/boot/dts/bcm2836-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2836-rpi.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 &vchiq {
 	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
diff --git a/arch/arm/boot/dts/broadcom/bcm2836.dtsi b/arch/arm/boot/dts/broadcom/bcm2836.dtsi
new file mode 100644
index 000000000000..783fe624ba68
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2836.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2836";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp";
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
+		 * /About-the-L1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+
+		v7_cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
+		 * /About-the-L2-Memory-system?lang=en
+		 * Source for cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
+			cache-level = <2>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2836-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
new file mode 100644
index 000000000000..1868cee05853
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-2-b.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b-rev2", "brcm,bcm2837";
+	model = "Raspberry Pi 2 Model B rev 1.2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETH_CLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
index 66ab35eccba7..3548306dfbcb 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-a-plus.dts
@@ -2,7 +2,9 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
@@ -17,17 +19,6 @@
 		device_type = "memory";
 		reg = <0 0x20000000>;
 	};
-
-	leds {
-		act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-		};
-	};
 };
 
 &firmware {
@@ -52,7 +43,6 @@
 	 * This is mostly based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -122,32 +112,23 @@
 	status = "okay";
 };
 
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-	status = "okay";
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
 };
 
-/*
- * SDHCI is used to control the SDIO for wireless
- *
- * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
- * by a single GPIO. We can't give GPIO control to one of the drivers,
- * otherwise the other part would get unexpectedly disturbed.
- */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
 	status = "okay";
-	bus-width = <4>;
-	non-removable;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
 };
 
 /* SDHOST is used to drive the SD card */
@@ -158,16 +139,15 @@
 	bus-width = <4>;
 };
 
-/* uart0 communicates with the BT module */
+/* uart0 communicates with the BT module
+ *
+ * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
+ * by a single GPIO. We can't give GPIO control to one of the drivers,
+ * otherwise the other part would get unexpectedly disturbed.
+ */
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-	};
 };
 
 /* uart1 is mapped to the pin header */
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
index 74ed6d047807..2f1800cbc522 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b-plus.dts
@@ -3,7 +3,9 @@
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
 #include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
@@ -18,22 +20,10 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
+};
 
-	leds {
-		act {
-			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-	};
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
 };
 
 &firmware {
@@ -43,7 +33,7 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "BT_ON",
 				  "WL_ON",
-				  "STATUS_LED_R",
+				  "PWR_LED_R",
 				  "LAN_RUN",
 				  "",
 				  "CAM_GPIO0",
@@ -59,7 +49,6 @@
 	 * the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -108,7 +97,7 @@
 			  "SD1_DATA3",
 			  "PWM0_OUT",
 			  "PWM1_OUT",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "WIFI_CLK",
 			  "SDA0",
 			  "SCL0",
@@ -129,27 +118,23 @@
 	status = "okay";
 };
 
-&pwm {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
-	status = "okay";
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
 };
 
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
+&pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
 	status = "okay";
-	bus-width = <4>;
-	non-removable;
-	mmc-pwrseq = <&wifi_pwrseq>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
 };
 
 /* SDHOST is used to drive the SD card */
@@ -164,13 +149,6 @@
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 /* uart1 is mapped to the pin header */
@@ -179,3 +157,7 @@
 	pinctrl-0 = <&uart1_gpio14>;
 	status = "okay";
 };
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
index 054ecaa355c9..61270340075c 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-3-b.dts
@@ -2,8 +2,10 @@
 /dts-v1/;
 #include "bcm2837.dtsi"
 #include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
 #include "bcm283x-rpi-smsc9514.dtsi"
 #include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
 
 / {
 	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
@@ -18,17 +20,10 @@
 		device_type = "memory";
 		reg = <0 0x40000000>;
 	};
+};
 
-	leds {
-		act {
-			gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
-	};
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
 };
 
 &firmware {
@@ -54,7 +49,6 @@
 	 * the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -103,7 +97,7 @@
 			  "SD1_DATA3",
 			  "PWM0_OUT",
 			  "PWM1_OUT",
-			  "ETHCLK",
+			  "ETH_CLK",
 			  "WIFI_CLK",
 			  "SDA0",
 			  "SCL0",
@@ -130,17 +124,14 @@
 	status = "okay";
 };
 
+&led_act {
+	gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
+};
+
 /* uart0 communicates with the BT module */
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
-	status = "okay";
-
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <2000000>;
-		shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 /* uart1 is mapped to the pin header */
@@ -150,23 +141,6 @@
 	status = "okay";
 };
 
-/* SDHCI is used to control the SDIO for wireless */
-&sdhci {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_gpio34>;
-	status = "okay";
-	bus-width = <4>;
-	non-removable;
-	mmc-pwrseq = <&wifi_pwrseq>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
 /* SDHOST is used to drive the SD card */
 &sdhost {
 	pinctrl-names = "default";
@@ -174,3 +148,7 @@
 	status = "okay";
 	bus-width = <4>;
 };
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
index 588d9411ceb6..85f54fa595aa 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3-io3.dts
@@ -13,7 +13,6 @@
 	 * This is based on the official GPU firmware DT blob.
 	 *
 	 * Legend:
-	 * "NC" = not connected (no rail from the SoC)
 	 * "FOO" = GPIO line named "FOO" on the schematic
 	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
 	 */
@@ -63,8 +62,8 @@
 			  "GPIO43",
 			  "GPIO44",
 			  "GPIO45",
-			  "GPIO46",
-			  "GPIO47",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
 			  /* Used by eMMC */
 			  "SD_CLK_R",
 			  "SD_CMD_R",
@@ -73,11 +72,12 @@
 			  "SD_DATA2_R",
 			  "SD_DATA3_R";
 
+	pinctrl-names = "default";
 	pinctrl-0 = <&gpioout &alt0>;
 };
 
 &hdmi {
-	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>;
 	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi
index 7c3cb7ece6cb..1e4e4946b6b6 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-cm3.dtsi
@@ -33,12 +33,12 @@
 		#gpio-cells = <2>;
 		gpio-line-names = "HDMI_HPD_N",
 				  "EMMC_EN_N",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC",
-				  "NC";
+				  "",
+				  "",
+				  "",
+				  "",
+				  "",
+				  "";
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000000..85cf594724ef
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
+	model = "Raspberry Pi Zero 2 W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "CAM_GPIO0", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "BT_ON", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "SDA0", /* GPIO44 */
+			  "SCL0", /* GPIO45 */
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2837.dtsi b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
new file mode 100644
index 000000000000..c281697142b1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm2837.dtsi
@@ -0,0 +1,144 @@
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2837";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	412000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2837-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi
index 70bece63f9a7..70bece63f9a7 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-lan7515.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi
new file mode 100644
index 000000000000..f83e56de1a72
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-led-deprecated.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/*
+	 * This file provides the now deprecated ACT LED to the
+	 * Raspberry Pi boards. Please don't include this file
+	 * for new boards!
+	 */
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led_act: led-act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9512.dtsi
index 967e081cb9c2..882b13807075 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9512.dtsi
@@ -12,7 +12,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
index dc7ae776db5f..4273b90b53cc 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi
@@ -11,7 +11,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethernet: usbether@1 {
+		ethernet: ethernet@1 {
 			compatible = "usb424,ec00";
 			reg = <1>;
 		};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
index 73f4ece8dcd0..73f4ece8dcd0 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-otg.dtsi
index e2fd9610e125..e2fd9610e125 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-otg.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi
new file mode 100644
index 000000000000..0ff0e9e25327
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-usb-peripheral.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+&usb {
+	dr_mode = "peripheral";
+	g-rx-fifo-size = <256>;
+	g-np-tx-fifo-size = <32>;
+	g-tx-fifo-size = <256 256 512 512 512 768 768>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi b/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi
new file mode 100644
index 000000000000..0b64cc19941f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x-rpi-wifi-bt.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+	};
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	status = "okay";
+
+	bt: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm283x.dtsi b/arch/arm/boot/dts/broadcom/bcm283x.dtsi
new file mode 100644
index 000000000000..69b0919f1324
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm283x.dtsi
@@ -0,0 +1,525 @@
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
+#include <dt-bindings/clock/bcm2835-aux.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/* firmware-provided startup stubs live here, where the secondary CPUs are
+ * spinning.
+ */
+/memreserve/ 0x00000000 0x00001000;
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
+ * bcm2835.dtsi and bcm2836.dtsi.
+ */
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	rmem: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cma: linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x4000000>; /* 64MB */
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+
+			trips {
+				cpu-crit {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		system_timer: timer@7e003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			/* This could be a reference to BCM2835_CLOCK_TIMER,
+			 * but we don't have the driver using the common clock
+			 * support yet.
+			 */
+			clock-frequency = <1000000>;
+		};
+
+		txp: txp@7e004000 {
+			compatible = "brcm,bcm2835-txp";
+			reg = <0x7e004000 0x20>;
+			interrupts = <1 11>;
+		};
+
+		clocks: cprman@7e101000 {
+			compatible = "brcm,bcm2835-cprman";
+			#clock-cells = <1>;
+			reg = <0x7e101000 0x2000>;
+
+			/* CPRMAN derives almost everything from the
+			 * platform's oscillator.  However, the DSI
+			 * pixel clocks come from the DSI analog PHY.
+			 */
+			clocks = <&clk_osc>,
+				<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
+				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
+		};
+
+		mailbox: mailbox@7e00b880 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
+		gpio: gpio@7e200000 {
+			compatible = "brcm,bcm2835-gpio";
+			reg = <0x7e200000 0xb4>;
+			/*
+			 * The GPIO IP block is designed for 3 banks of GPIOs.
+			 * Each bank has a GPIO interrupt for itself.
+			 * There is an overall "any bank" interrupt.
+			 * In order, these are GIC interrupts 17, 18, 19, 20.
+			 * Since the BCM2835 only has 2 banks, the 2nd bank
+			 * interrupt output appears to be mirrored onto the
+			 * 3rd bank's interrupt signal.
+			 * So, a bank0 interrupt shows up on 17, 20, and
+			 * a bank1 interrupt shows up on 18, 19, 20!
+			 */
+			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&gpio 0 0 54>;
+
+			/* Defines common pin muxing groups
+			 *
+			 * While each pin can have its mux selected
+			 * for various functions individually, some
+			 * groups only make sense to switch to a
+			 * particular function together.
+			 */
+			dpi_gpio0: dpi-gpio0 {
+				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
+					     12 13 14 15 16 17 18 19
+					     20 21 22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			emmc_gpio22: emmc-gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			emmc_gpio34: emmc-gpio34 {
+				brcm,pins = <34 35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP>;
+			};
+			emmc_gpio48: emmc-gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			gpclk0_gpio4: gpclk0-gpio4 {
+				brcm,pins = <4>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio5: gpclk1-gpio5 {
+				brcm,pins = <5>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio42: gpclk1-gpio42 {
+				brcm,pins = <42>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio44: gpclk1-gpio44 {
+				brcm,pins = <44>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio6: gpclk2-gpio6 {
+				brcm,pins = <6>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio43: gpclk2-gpio43 {
+				brcm,pins = <43>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+				brcm,pull = <BCM2835_PUD_OFF>;
+			};
+
+			i2c0_gpio0: i2c0-gpio0 {
+				brcm,pins = <0 1>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio28: i2c0-gpio28 {
+				brcm,pins = <28 29>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio44: i2c0-gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT1>;
+			};
+			i2c1_gpio2: i2c1-gpio2 {
+				brcm,pins = <2 3>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c1_gpio44: i2c1-gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			jtag_gpio22: jtag-gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			pcm_gpio18: pcm-gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pcm_gpio28: pcm-gpio28 {
+				brcm,pins = <28 29 30 31>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			sdhost_gpio48: sdhost-gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			spi0_gpio7: spi0-gpio7 {
+				brcm,pins = <7 8 9 10 11>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi0_gpio35: spi0-gpio35 {
+				brcm,pins = <35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi1_gpio16: spi1-gpio16 {
+				brcm,pins = <16 17 18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			spi2_gpio40: spi2-gpio40 {
+				brcm,pins = <40 41 42 43 44 45>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			uart0_gpio14: uart0-gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			/* Separate from the uart0_gpio14 group
+			 * because it conflicts with spi1_gpio16, and
+			 * people often run uart0 on the two pins
+			 * without flow control.
+			 */
+			uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
+			};
+			uart0_gpio32: uart0-gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
+			};
+			uart0_gpio36: uart0-gpio36 {
+				brcm,pins = <36 37>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
+				brcm,pins = <38 39>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			uart1_gpio14: uart1-gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio32: uart1-gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio40: uart1-gpio40 {
+				brcm,pins = <40 41>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 {
+				brcm,pins = <42 43>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+		};
+
+		uart0: serial@7e201000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x200>;
+			interrupts = <2 25>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		sdhost: mmc@7e202000 {
+			compatible = "brcm,bcm2835-sdhost";
+			reg = <0x7e202000 0x100>;
+			interrupts = <2 24>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			status = "disabled";
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_PCM>;
+			status = "disabled";
+		};
+
+		spi: spi@7e204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x200>;
+			interrupts = <2 22>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7e205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x200>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dpi: dpi@7e208000 {
+			compatible = "brcm,bcm2835-dpi";
+			reg = <0x7e208000 0x8c>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>,
+				 <&clocks BCM2835_CLOCK_DPI>;
+			clock-names = "core", "pixel";
+			status = "disabled";
+		};
+
+		dsi0: dsi@7e209000 {
+			compatible = "brcm,bcm2835-dsi0";
+			reg = <0x7e209000 0x78>;
+			interrupts = <2 4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLA_DSI0>,
+				 <&clocks BCM2835_CLOCK_DSI0E>,
+				 <&clocks BCM2835_CLOCK_DSI0P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi0_byte",
+					     "dsi0_ddr2",
+					     "dsi0_ddr";
+
+			status = "disabled";
+		};
+
+		aux: aux@7e215000 {
+			compatible = "brcm,bcm2835-aux";
+			#clock-cells = <1>;
+			reg = <0x7e215000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+		};
+
+		uart1: serial@7e215040 {
+			compatible = "brcm,bcm2835-aux-uart";
+			reg = <0x7e215040 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+			status = "disabled";
+		};
+
+		spi1: spi@7e215080 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e215080 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@7e2150c0 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e2150c0 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7e20c000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		sdhci: mmc@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
+			status = "disabled";
+		};
+
+		hvs@7e400000 {
+			compatible = "brcm,bcm2835-hvs";
+			reg = <0x7e400000 0x6000>;
+			interrupts = <2 1>;
+		};
+
+		dsi1: dsi@7e700000 {
+			compatible = "brcm,bcm2835-dsi1";
+			reg = <0x7e700000 0x8c>;
+			interrupts = <2 12>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLD_DSI1>,
+				 <&clocks BCM2835_CLOCK_DSI1E>,
+				 <&clocks BCM2835_CLOCK_DSI1P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi1_byte",
+					     "dsi1_ddr2",
+					     "dsi1_ddr";
+
+			status = "disabled";
+		};
+
+		csi0: csi@7e800000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e800000 0x800>,
+			      <0x7e802000 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <2 6>;
+			brcm,num-data-lanes = <2>;
+			status = "disabled";
+			port {
+			};
+		};
+
+		csi1: csi@7e801000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e801000 0x800>,
+			      <0x7e802004 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <2 7>;
+			brcm,num-data-lanes = <4>;
+			status = "disabled";
+			port {
+			};
+		};
+
+		i2c1: i2c@7e804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@7e980000 {
+			compatible = "brcm,bcm2835-usb";
+			reg = <0x7e980000 0x10000>;
+			interrupts = <1 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk_usb>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+		};
+	};
+
+	clocks {
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clk-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <19200000>;
+		};
+
+		clk_usb: clk-usb {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "otg";
+			clock-frequency = <480000000>;
+		};
+	};
+
+	usbphy: phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
index 6a96655d8626..c80ac16ad949 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac56u.dts
@@ -21,47 +21,46 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		all {
+		led-all {
 			label = "bcm53xx:blue:all";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -70,19 +69,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
index 3b0029e61b4c..3fe17bd7b86d 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts
@@ -21,31 +21,31 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -54,25 +54,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
new file mode 100644
index 000000000000..f5c95c9a712e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Taishi Shimizu <s.taishi14142@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "buffalo,wxr-1750dhp", "brcm,bcm4708";
+	model = "Buffalo WXR-1750DHP";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-aoss {
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		/* GPIO 3 is a switch button with AUTO / MANUAL. */
+		button-manual {
+			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+			label = "MANUAL";
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-restart {
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+		};
+
+		/* GPIO 8 and 9 are a tri-state switch button with
+		 * ROUTER / AP / WB.
+		 */
+		button-router {
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			label = "ROUTER";
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-wb {
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+			label = "WB";
+			linux,code = <BTN_2>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-internet {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "internet";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = "router";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "router";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_USB;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&xhci_port1 &ehci_port1 &ohci_port1>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
new file mode 100644
index 000000000000..9f9084269ef5
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb {
+			/* label = "bcm53xx:blue:usb"; */
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>, <&ohci_port2>,
+					  <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power0 {
+			/* label = "bcm53xx:red:power"; */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			/* label = "bcm53xx:white:power"; */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router0 {
+			/*  label = "bcm53xx:blue:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			/* label = "bcm53xx:amber:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			/* label = "bcm53xx:blue:wan"; */
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			/* label = "bcm53xx:blue:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			/* label = "bcm53xx:amber:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		button-mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		button-sw-ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts
new file mode 100644
index 000000000000..8e506269fa1a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts
new file mode 100644
index 000000000000..596129027074
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1166dhp2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP2
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP2";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
index 90f57bad6b24..95ef6ca7210b 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wzr-1750dhp.dts
@@ -21,15 +21,15 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
 		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,7 +49,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -58,40 +58,40 @@
 			linux,default-trigger = "usbport";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:white:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:blue:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -100,33 +100,33 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
index 41548d6d479a..0ed25bf71f0d 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6300-v1.dts
@@ -21,16 +21,21 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
index cd797b4202ad..0454423fe166 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-linksys-ea6500-v2.dts
@@ -19,19 +19,20 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
new file mode 100644
index 000000000000..72e960c888ac
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xap-1510-v1", "brcm,bcm4708";
+	model = "Luxul XAP-1510 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@4 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
new file mode 100644
index 000000000000..750e17482371
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Luxul XWC-1000
+ *
+ * Copyright 2014 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwc-1000", "brcm,bcm4708";
+	model = "Luxul XWC-1000 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "ubi";
+					reg = <0x00000000 0x08000000>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@4 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
new file mode 100644
index 000000000000..2bdbc7d18b0e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts
@@ -0,0 +1,134 @@
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for Netgear R6250 V1
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r6250-v1", "brcm,bcm4708";
+	model = "Netgear R6250 V1 (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wireless {
+			label = "bcm53xx:blue:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
index 79542e18915c..77396730bdd3 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-netgear-r6300-v2.dts
@@ -12,7 +12,7 @@
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
-	compatible = "netgear,r6300v2", "brcm,bcm4708";
+	compatible = "netgear,r6300-v2", "brcm,bcm4708";
 	model = "Netgear R6300 V2 (BCM4708)";
 
 	chosen {
@@ -21,36 +21,36 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
@@ -59,19 +59,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
index abd35a518046..b226bef3369c 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts
@@ -21,71 +21,71 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-white {
+		led-usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&xhci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		usb3-green {
+		led-usb3-green {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-red {
+		led-status-red {
 			label = "bcm53xx:red:status";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-green {
+		led-status-green {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		status-blue {
+		led-status-blue {
 			label = "bcm53xx:blue:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-red {
+		led-wan-red {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 		};
@@ -94,19 +94,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
@@ -122,38 +122,36 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
-			reg = <0>;
 			label = "lan4";
 		};
 
 		port@1 {
-			reg = <1>;
 			label = "lan3";
 		};
 
 		port@2 {
-			reg = <2>;
 			label = "lan2";
 		};
 
 		port@3 {
-			reg = <3>;
 			label = "lan1";
 		};
 
 		port@4 {
-			reg = <4>;
 			label = "wan";
 		};
 
 		port@5 {
-			reg = <5>;
 			label = "cpu";
-			ethernet = <&gmac0>;
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/broadcom/bcm4708.dtsi
index 1a19e97a987d..1a19e97a987d 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm4708.dtsi
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
index c29950b43a95..3854db0118a9 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-asus-rt-n18u.dts
@@ -21,37 +21,37 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
@@ -60,13 +60,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
index 4dcec6865469..192b8db5a89c 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts
@@ -21,15 +21,15 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
 		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,40 +49,40 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -91,26 +91,26 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch device mode? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
@@ -118,6 +118,40 @@
 	};
 };
 
-&usb3_phy {
+&srab {
 	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
index 0e349e39f608..7655e4ff2d1c 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-buffalo-wzr-900dhp.dts
@@ -21,15 +21,15 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 7 0>;
-		gpio-mosi = <&chipcommon 4 0>;
+		sck-gpios = <&chipcommon 7 0>;
+		mosi-gpios = <&chipcommon 4 0>;
 		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,45 +49,45 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
 		};
@@ -96,7 +96,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
new file mode 100644
index 000000000000..0198b5f9e4a7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "luxul,xap-1410-v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XAP-1410 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@4 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
new file mode 100644
index 000000000000..73ff1694a4a0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-1200-v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XWR-1200 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-lan3 {
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan4 {
+			label = "bcm53xx:green:lan4";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan2 {
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan1 {
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
index 01c390ed48ea..b6a5886698b2 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47081-tplink-archer-c5-v2.dts
@@ -23,50 +23,50 @@
 	leds {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:green:2ghz";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:green:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port1 {
+		led-usb2-port1 {
 			label = "bcm53xx:green:usb2-port1";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan-green {
+		led-wan-green {
 			label = "bcm53xx:green:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:green:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:green:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb2-port2 {
+		led-usb2-port2 {
 			label = "bcm53xx:green:usb2-port2";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
@@ -77,13 +77,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
@@ -95,30 +95,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
@@ -126,7 +111,3 @@
 &usb2 {
 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 };
-
-&usb3_phy {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/broadcom/bcm47081.dtsi
index ed13af028528..ed13af028528 100644
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm47081.dtsi
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
new file mode 100644
index 000000000000..3da2daee0c84
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac3200.dts
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "ASUS RT-AC3200";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et0macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et0macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
index 8f1e565c3db4..59400217f8c3 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts
@@ -19,27 +19,33 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
@@ -47,16 +53,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
@@ -64,6 +68,11 @@
 	};
 };
 
+&gmac0 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
 &usb3_phy {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
index ce888b1835d1..b7cd2faa30ce 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-buffalo-wxr-1900dhp.dts
@@ -19,57 +19,57 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router-amber {
+		led-router-amber {
 			label = "bcm53xx:amber:router";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		router-white {
+		led-router-white {
 			label = "bcm53xx:white:router";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-amber {
+		led-wireless-amber {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless-white {
+		led-wireless-white {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -77,42 +77,40 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_POWER>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
new file mode 100644
index 000000000000..2ba5adf2b7e7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-linksys-ea9200.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Linksys EA9200";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
index 1f87993eae1d..24ba8f8f9bf3 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r7000.dts
@@ -19,52 +19,52 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x08000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:white:5ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
@@ -72,22 +72,20 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
new file mode 100644
index 000000000000..127ca8741220
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts
@@ -0,0 +1,252 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R8000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Netgear R8000 (BCM4709)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz-1 {
+			label = "bcm53xx:white:5ghz-1";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			ieee80211-freq-limit = <5735000 5835000>;
+			brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@1,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		bridge@1,1,0 {
+			reg = <0x0000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bridge@1,0 {
+				reg = <0x800 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi@0,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+					reg = <0x0000 0 0 0 0>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+				};
+			};
+
+			bridge@1,2,2 {
+				reg = <0x1000 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi@1,4,0 {
+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+					reg = <0x0000 0 0 0 0>;
+					ieee80211-freq-limit = <5170000 5730000>;
+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
+				};
+			};
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
index f806be5da723..5a8b2b1567e6 100644
--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm4709-tplink-archer-c9-v1.dts
@@ -15,7 +15,7 @@
 		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
@@ -23,27 +23,27 @@
 	leds {
 		compatible = "gpio-leds";
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
@@ -51,24 +51,24 @@
 			linux,default-trigger = "usbport";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
 			linux,default-trigger = "usbport";
 		};
 
-		wan-blue {
+		led-wan-blue {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
@@ -77,16 +77,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
@@ -106,30 +104,15 @@
 	status = "okay";
 
 	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		boot@0 {
-			label = "boot";
-			reg = <0x000000 0x040000>;
-			read-only;
-		};
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
 
-		os-image@100000 {
-			label = "os-image";
-			reg = <0x040000 0x200000>;
+		partition-os-image {
 			compatible = "brcm,trx";
 		};
 
-		rootfs@240000 {
-			label = "rootfs";
-			reg = <0x240000 0xc00000>;
-		};
-
-		nvram@ff0000 {
-			label = "nvram";
-			reg = <0xff0000 0x010000>;
+		partition-file-system {
+			linux,rootfs;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm4709.dtsi b/arch/arm/boot/dts/broadcom/bcm4709.dtsi
new file mode 100644
index 000000000000..cba3d910bed8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4709.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include "bcm4708.dtsi"
+
+&uart0 {
+	clock-frequency = <125000000>;
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts
new file mode 100644
index 000000000000..1655ac95769c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094-asus-rt-ac3100.dtsi"
+
+/ {
+	compatible = "asus,rt-ac3100", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC3100";
+
+	nvram@1c080000 {
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et0macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et0macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
new file mode 100644
index 000000000000..2cfaaabc7a6a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac3100.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb2 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port1>, <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			label = "cpu";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
new file mode 100644
index 000000000000..01ec8c03686a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Tom Brautaset <tbrautaset@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "asus,rt-ac5300", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC5300";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+		device_type = "memory";
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_WPS;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et1macaddr 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x00000000 0x00080000>;
+			label = "boot";
+			read-only;
+		};
+
+		partition@80000 {
+			reg = <0x00080000 0x00180000>;
+			label = "nvram";
+		};
+
+		partition@200000 {
+			compatible = "brcm,trx";
+			reg = <0x00200000 0x07e00000>;
+			label = "firmware";
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan1";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan3";
+		};
+
+		port@4 {
+			label = "lan4";
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
new file mode 100644
index 000000000000..a197f447fd97
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac88u.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094-asus-rt-ac3100.dtsi"
+
+/ {
+	compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
+	model = "ASUS RT-AC88U";
+
+	nvram@1c080000 {
+		et1macaddr: et1macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	switch {
+		compatible = "realtek,rtl8365mb";
+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+		dsa,member = <1 0>;
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy-handle = <&ethphy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan6";
+				phy-handle = <&ethphy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&ethphy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan8";
+				phy-handle = <&ethphy3>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&sw0_p5>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <2100>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+	};
+};
+
+&gmac0 {
+	status = "disabled";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac2 {
+	nvmem-cells = <&et1macaddr 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&srab {
+	dsa,member = <0 0>;
+
+	ports {
+		sw0_p5: port@5 {
+			/delete-property/ethernet;
+
+			label = "extsw";
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
new file mode 100644
index 000000000000..c5099defe9f9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for D-Link DIR-885L
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-885L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1e3f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e3f0000 0x10000>;
+
+		et2macaddr: et2macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					compatible = "seama";
+					label = "firmware";
+					reg = <0x00000000 0x08000000>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: router / extender */
+		button-extender {
+			label = "Extender";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et2macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et2macaddr 3>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
new file mode 100644
index 000000000000..3124dfd01b94
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device tree for D-Link DIR-890L
+ * D-Link calls this board "WRGAC36"
+ * this router has the same looks and form factor as D-Link DIR-885L.
+ *
+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
+ * router/extender switch is mounted (there is an empty mount point on the
+ * PCB) so this device is a pure router. Also the LAN ports are in the right
+ * order.
+ *
+ * Based on the device tree for DIR-885L
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 Linus Walleij
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-890L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		/*
+		 * LED information is derived from the boot log which
+		 * conveniently lists all the LEDs.
+		 */
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2-white {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Called "factory reset" in the vendor dmesg */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
+	 * 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e1f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e1f0000 0x00010000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+};
+
+&gmac2 {
+	/*
+	 * The NVRAM curiously does not contain a MAC address
+	 * for et2 so since that is the only ethernet interface
+	 * actually in use on the platform, we use this et0 MAC
+	 * address for et2.
+	 */
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&nandcs {
+	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * This is called "nflash" in the vendor kernel with
+		 * "upgrade" and "rootfs" (probably using OpenWrt
+		 * splitpart). We call it "firmware" like standard tools
+		 * assume. The CFE loader contains incorrect information
+		 * about TRX partitions, ignore this, there are no TRX
+		 * partitions: this device uses SEAMA.
+		 */
+		firmware@0 {
+			compatible = "seama";
+			label = "firmware";
+			reg = <0x00000000 0x08000000>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+		};
+
+		port@1 {
+			label = "lan2";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan4";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			status = "disabled";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			label = "cpu";
+			phy-mode = "rgmii";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
new file mode 100644
index 000000000000..2b5c80d835e9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Linksys EA9500";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x100000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+				label = "WiFi";
+				linux,code = <KEY_RFKILL>;
+				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+				label = "Reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:green:usb2";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wifi-disabled {
+			label = "bcm53xx:amber:wifi-disabled";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wifi-enabled {
+			label = "bcm53xx:white:wifi-enabled";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar1 {
+			label = "bcm53xx:white:bluebar1";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar2 {
+			label = "bcm53xx:white:bluebar2";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar3 {
+			label = "bcm53xx:white:bluebar3";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-bluebar4 {
+			label = "bcm53xx:white:bluebar4";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar5 {
+			label = "bcm53xx:white:bluebar5";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar6 {
+			label = "bcm53xx:white:bluebar6";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar7 {
+			label = "bcm53xx:white:bluebar7";
+			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar8 {
+			label = "bcm53xx:white:bluebar8";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mdio-mux@18003000 {
+
+		/* BIT(9) = 1 => external mdio */
+		mdio@200 {
+			reg = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch@0  {
+				compatible = "brcm,bcm53125";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+				reset-names = "robo_reset";
+				reg = <0>;
+				dsa,member = <1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinmux_mdio>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan1";
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan5";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan6";
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan3";
+					};
+
+					sw1_p8: port@8 {
+						reg = <8>;
+						ethernet = <&sw0_p0>;
+						label = "cpu";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		sw0_p0: port@0 {
+			label = "extsw";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@1 {
+			label = "lan7";
+		};
+
+		port@2 {
+			label = "lan4";
+		};
+
+		port@3 {
+			label = "lan8";
+		};
+
+		port@4 {
+			label = "wan";
+		};
+
+		port@5 {
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "linksys,ns-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x080000 0x0100000>;
+		};
+
+		partition@180000 {
+			label = "devinfo";
+			reg = <0x0180000 0x080000>;
+		};
+
+		partition@200000 {
+			reg = <0x0200000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
+		};
+
+		partition@1f00000 {
+			reg = <0x01f00000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
+		};
+
+		partition@5200000 {
+			label = "system";
+			reg = <0x05200000 0x02e00000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
new file mode 100644
index 000000000000..e374062eb5b7
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul ABR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 1>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
new file mode 100644
index 000000000000..badafa024d24
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XAP-1610 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@1 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
new file mode 100644
index 000000000000..cf95af9db1e6
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XBR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 1>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
new file mode 100644
index 000000000000..992c19e1cfa1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Legrand AV Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWC-2000 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
new file mode 100644
index 000000000000..4d0ba315a204
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3100 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-lan3 {
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan4 {
+			label = "bcm53xx:green:lan4";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan1 {
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan2 {
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
new file mode 100644
index 000000000000..83c429afc297
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3150 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+			#nvmem-cell-cells = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan4";
+		};
+
+		port@1 {
+			label = "lan3";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan1";
+		};
+
+		port@4 {
+			label = "wan";
+			nvmem-cells = <&et0macaddr 5>;
+			nvmem-cell-names = "mac-address";
+		};
+
+		port@5 {
+			label = "cpu";
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
index f42a1703f4ab..76d562610654 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-netgear-r8500.dts
@@ -18,45 +18,45 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-1 {
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		5ghz-2 {
+		led-5ghz-2 {
 			label = "bcm53xx:white:5ghz-2";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
@@ -65,25 +65,25 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
index ac3a4483dcb3..bb1bc4e61bc2 100644
--- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts
@@ -15,14 +15,14 @@
 
 	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x08000000
-		       0x88000000 0x18000000>;
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
@@ -55,7 +55,7 @@
 			reg = <0x0080000 0x0100000>;
 		};
 
-		partition@180000{
+		partition@180000 {
 			label = "phicomm";
 			reg = <0x0180000 0x0280000>;
 			read-only;
diff --git a/arch/arm/boot/dts/broadcom/bcm47094.dtsi b/arch/arm/boot/dts/broadcom/bcm47094.dtsi
new file mode 100644
index 000000000000..6282363313e1
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47094.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include "bcm4708.dtsi"
+
+/ {
+};
+
+&pinctrl {
+	compatible = "brcm,bcm4709-pinmux";
+
+	pinmux_mdio: mdio-pins {
+		groups = "mdio_grp";
+		function = "mdio";
+	};
+};
+
+&usb3_phy {
+	compatible = "brcm,ns-bx-usb3-phy";
+};
+
+&uart0 {
+	clock-frequency = <125000000>;
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
new file mode 100644
index 000000000000..ac44c745bdf8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Luxul XAP-1440 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wlan {
+			label = "bcm53xx:blue:wlan";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-system {
+			label = "bcm53xx:green:system";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	/delete-node/ fixed-link;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
index 2e1a7e382cb7..fd071da26cfa 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts
@@ -20,36 +20,34 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:green:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
@@ -83,3 +81,22 @@
 		};
 	};
 };
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-handle = <&bcm54210e>;
+
+	/delete-node/ fixed-link;
+
+	mdio {
+		/delete-node/ switch@1e;
+
+		bcm54210e: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
index 049cdfd92706..3ac6cac541ca 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47189-tenda-ac9.dts
@@ -20,37 +20,37 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	leds {
+	leds-0 {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		system {
+		led-system {
 			label = "bcm53xx:blue:system";
 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
 		};
 	};
 
-	pcie0_leds {
+	leds-1 {
 		compatible = "gpio-leds";
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
 		};
@@ -59,19 +59,19 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
@@ -105,3 +105,33 @@
 		};
 	};
 };
+
+&switch {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan1";
+		};
+
+		port@2 {
+			label = "lan2";
+		};
+
+		port@3 {
+			label = "lan3";
+		};
+
+		port@4 {
+			label = "lan4";
+		};
+
+		port@8 {
+			label = "cpu";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm47622.dtsi b/arch/arm/boot/dts/broadcom/bcm47622.dtsi
new file mode 100644
index 000000000000..485863f9c420
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm47622.dtsi
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm47622", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
new file mode 100644
index 000000000000..08abfdc63d18
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+
+	nvmem-cells = <&macaddr_board_config_66>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			compatible = "linux,ubi";
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+
+			volumes {
+				ubi-volume-board-config {
+					volname = "board-config";
+
+					nvmem-layout {
+						compatible = "fixed-layout";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						macaddr_board_config_66: macaddr@66 {
+							reg = <0x66 0x6>;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts
new file mode 100644
index 000000000000..c1f54391746f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DWL-8610AP";
+	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		/* 512 MB RAM in 2 x Macronix D9PSH chips */
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-diag {
+			/* Actually "diag" unclear what this means */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-wlan-2g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wlan-5g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * Flash memory at 0x1e000000-0x1fffffff
+	 * Macronix 32 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e080000 0x00020000>;
+
+		et0macaddr: et0macaddr {
+		};
+
+		et1macaddr: et1macaddr {
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	/* Serial SPI NOR Flash MX 25L1606E */
+	status = "okay";
+};
+
+&nandcs {
+	/*
+	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
+	 *
+	 * This ECC is a bit unorthodox but it is what the stock firmware
+	 * is using, so to be able to mount the original partitions
+	 * this is necessary.
+	 */
+	nand-ecc-strength = <5>;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* This is named nflash1.trx in CFE */
+		trx@0 {
+			label = "firmware";
+			reg = <0x00000000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.trx2 in CFE */
+		trx2@2800000 {
+			label = "firmware2";
+			reg = <0x02800000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.rwfs in CFE */
+		free@5000000 {
+			label = "free";
+			reg = <0x05000000 0x03000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
new file mode 100644
index 000000000000..45bd27906f29
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR32 / Codename: Espresso
+ *
+ * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708";
+	model = "Meraki MR32";
+
+	chosen {
+		bootargs = " console=ttyS0,115200n8 earlycon";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		serial1 = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sysled3 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+		sysled2 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-0 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 0 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-1 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 1 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 2 50000 0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	status = "okay";
+	/*
+	 * bluetooth-le {
+	 *	compatible = "brcm,bcm20732";
+	 *	enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+	 *};
+	 */
+};
+
+&gmac0 {
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&mac_address>;
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&pwm {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_pwm>;
+};
+
+&nandcs {
+	partitions {
+		/*
+		 * The partition autodetection does not work for this device.
+		 * It will only detect the "nvram" partition with an incorrect size.
+		 *	[    1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0
+		 *	[    1.727962] Creating 1 MTD partitions on "brcmnand.0":
+		 *	[    1.733117] 0x000000400000-0x000008000000 : "nvram"
+		 */
+
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+			read-only;
+		};
+
+		partition@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+			read-only;
+		};
+
+		partition@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+			read-only;
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "poe";
+		};
+
+		port@5 {
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	current_sense: ina219@45 {
+		compatible = "ti,ina219";
+		reg = <0x45>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_address: mac-address@66 {
+				reg = <0x66 0x6>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch1.dtsi
index c349e8f0afc5..c349e8f0afc5 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch1.dtsi
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch4.dtsi
index 18e25e302b13..18e25e302b13 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch4.dtsi
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi
index c8e56d30bd6f..c8e56d30bd6f 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0-bch8.dtsi
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi
index 925a7c9ce5b7..be9a00ff752d 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm5301x-nand-cs0.dtsi
@@ -6,8 +6,8 @@
  */
 
 / {
-	nand@18028000 {
-		nandcs: nandcs@0 {
+	nand-controller@18028000 {
+		nandcs: nand@0 {
 			compatible = "brcm,nandcs";
 			reg = <0>;
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/broadcom/bcm5301x.dtsi b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
new file mode 100644
index 000000000000..f06a178a9240
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm5301x.dtsi
@@ -0,0 +1,136 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm-ns.dtsi"
+
+/ {
+	mpcore-bus@19000000 {
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	i2c0: i2c@18009000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18009000 0x50>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	dmu-bus@1800c000 {
+		cru-bus@100 {
+			lcpll0: clock-controller@100 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-lcpll0";
+				reg = <0x100 0x14>;
+				clocks = <&osc>;
+				clock-output-names = "lcpll0", "pcie_phy",
+						     "sdio", "ddr_phy";
+			};
+
+			genpll: clock-controller@140 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-genpll";
+				reg = <0x140 0x24>;
+				clocks = <&osc>;
+				clock-output-names = "genpll", "phy",
+						     "ethernetclk",
+						     "usbclk", "iprocfast",
+						     "sata1", "sata2";
+			};
+		};
+	};
+
+	spi@18029200 {
+		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+		reg = <0x18029200 0x184>,
+		      <0x18029000 0x124>,
+		      <0x1811b408 0x004>,
+		      <0x180293a0 0x01c>;
+		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
+				  "spi_lr_session_aborted",
+				  "spi_lr_impatient",
+				  "spi_lr_session_done",
+				  "spi_lr_overread";
+		clocks = <&iprocmed>;
+		num-cs = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		spi_nor: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+			status = "disabled";
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
index 2e7fda9b998c..08cf1220b655 100644
--- a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
+++ b/arch/arm/boot/dts/broadcom/bcm53340-ubnt-unifi-switch8.dts
@@ -32,9 +32,8 @@
 
 &qspi {
 	status = "okay";
-	bspi-sel = <0>;
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		compatible = "m25p80";
 		reg = <0>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
index 4af8e3293cff..2df80740d181 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm53573.dtsi
@@ -127,6 +127,9 @@
 
 		pcie0: pcie@2000 {
 			reg = <0x00002000 0x1000>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
 		};
 
 		usb2: usb2@4000 {
@@ -135,7 +138,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			ehci: ehci@4000 {
+			ehci: usb@4000 {
 				compatible = "generic-ehci";
 				reg = <0x4000 0x1000>;
 				interrupt-parent = <&gic>;
@@ -155,9 +158,7 @@
 				};
 			};
 
-			ohci: ohci@d000 {
-				#usb-cells = <0>;
-
+			ohci: usb@d000 {
 				compatible = "generic-ohci";
 				reg = <0xd000 0x1000>;
 				interrupt-parent = <&gic>;
@@ -180,10 +181,74 @@
 
 		gmac0: ethernet@5000 {
 			reg = <0x5000 0x1000>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch: switch@1e {
+					compatible = "brcm,bcm53125";
+					reg = <0x1e>;
+
+					status = "disabled";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+						};
+
+						port@1 {
+							reg = <1>;
+						};
+
+						port@2 {
+							reg = <2>;
+						};
+
+						port@3 {
+							reg = <3>;
+						};
+
+						port@4 {
+							reg = <4>;
+						};
+
+						port@5 {
+							reg = <5>;
+							ethernet = <&gmac1>;
+
+							fixed-link {
+								speed = <1000>;
+								full-duplex;
+							};
+						};
+
+						port@8 {
+							reg = <8>;
+							ethernet = <&gmac0>;
+						};
+					};
+				};
+			};
 		};
 
 		gmac1: ethernet@b000 {
 			reg = <0xb000 0x1000>;
+			phy-mode = "internal";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
 		};
 
 		pmu@12000 {
diff --git a/arch/arm/boot/dts/broadcom/bcm63138.dtsi b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
new file mode 100644
index 000000000000..4ec568586b14
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63138.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 DSL SoCs Device Tree
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138 Reference Board";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		uart0 = &serial0;
+		uart1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0>;
+			enable-method = "brcm,bcm63138";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <1>;
+			enable-method = "brcm,bcm63138";
+			resets = <&pmb0 4 1>;
+		};
+	};
+
+	clocks {
+		/* UBUS peripheral clock */
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
+		};
+
+		/* peripheral clock for system timer */
+		axi_clk: axi_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* APB bus clock */
+		apb_clk: apb_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	/* ARM bus */
+	axi@80000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x80000000 0x784000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		L2: cache-controller@1d000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x1d000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			cache-size = <524288>;
+			cache-sets = <1024>;
+			cache-line-size = <32>;
+			interrupts = <GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		scu: scu@1e000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x1e000 0x100>;
+		};
+
+		gic: interrupt-controller@1f000 {
+			compatible = "arm,cortex-a9-gic";
+			reg = <0x1f000 0x1000
+				0x1e100 0x100>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+		};
+
+		global_timer: timer@1e200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x1e200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&axi_clk>;
+		};
+
+		local_timer: local-timer@1e600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1e600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&axi_clk>;
+		};
+
+		twd_watchdog: watchdog@1e620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x1e620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		armpll: armpll@20000 {
+			#clock-cells = <0>;
+			compatible = "brcm,bcm63138-armpll";
+			clocks = <&periph_clk>;
+			reg = <0x20000 0xf00>;
+		};
+
+		pmb0: reset-controller@4800c0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800c0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		pmb1: reset-controller@4800e0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800e0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		ahci: sata@a000 {
+			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0xa000 0x9ac>, <0x8040 0x24>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&pmb0 3 1>;
+			reset-names = "ahci";
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+		};
+
+		sata_phy: sata-phy@8100 {
+			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
+			reg = <0x8100 0x1e00>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
+	};
+
+	/* Legacy UBUS base */
+	ubus@fffe8000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x10000>;
+
+		timer: timer@80 {
+			compatible = "brcm,bcm6328-timer", "syscon";
+			reg = <0x80 0x3c>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x1b>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		serial1: serial@620 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x620 0x1b>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "periph";
+			status = "disabled";
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "nand_ctlrdy";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		serial@4400 {
+			compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart";
+			reg = <0x4400 0x1e0>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		bootlut: bootlut@8000 {
+			compatible = "brcm,bcm63138-bootlut";
+			reg = <0x8000 0x50>;
+		};
+
+		pl081_dma: dma-controller@d000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0xd000 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&timer>;
+			offset = <0x34>;
+			mask = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63148.dtsi b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
new file mode 100644
index 000000000000..e071cddb28fc
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63148.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63148", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		B15_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B15_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B15_0>, <&B15_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@80030000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80030000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8000>;
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@100 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x100 0x04>, <0x114 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@104 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x104 0x04>, <0x118 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@108 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x108 0x04>, <0x11c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@10c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10c 0x04>, <0x120 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@110 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x110 0x04>, <0x124 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@300 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x300 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x20>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm63178.dtsi b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
new file mode 100644
index 000000000000..430750b3030f
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm63178.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63178", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6756.dtsi b/arch/arm/boot/dts/broadcom/bcm6756.dtsi
new file mode 100644
index 000000000000..6433f8fa5eff
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6756.dtsi
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6756", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts
new file mode 100644
index 000000000000..a3616fb7b3a8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6846-genexis-xg6846b.dts
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2024 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Genexis XG6846B Ethernet layer 2/3 router";
+	compatible = "genexis,xg6846b", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Micron D9PTK 256 MB RAM */
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x10000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		secondary-boot@0 {
+			no-map;
+			reg = <0x00000000 0x00008000>;
+		};
+		pmc3-firmware@8000 {
+			no-map;
+			reg = <0x00008000 0x00100000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <20000>;
+
+		/* Called "canyon rescue button" in the vendor DTB */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 41 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+	/* Totally 79 GPIOs are available */
+	ngpios = <15>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+	brcm,serial-shift-bits = <16>;
+
+	led@0 {
+		reg = <0>;
+		active-low;
+		function = "ext";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@1 {
+		reg = <1>;
+		active-low;
+		function = "ext";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@3 {
+		reg = <3>;
+		active-low;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@4 {
+		reg = <4>;
+		active-low;
+		function = LED_FUNCTION_WAN;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@5 {
+		reg = <5>;
+		active-low;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@6 {
+		reg = <6>;
+		active-low;
+		function = LED_FUNCTION_POWER;
+		color = <LED_COLOR_ID_RED>;
+	};
+
+	led@15 {
+		reg = <15>;
+		active-low;
+		function = LED_FUNCTION_USB;
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@7 {
+		/* Activity 03 */
+		reg = <7>;
+		active-low;
+		function = "lan1";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@8 {
+		/* Activity 04 */
+		reg = <8>;
+		active-low;
+		function = "lan1";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@9 {
+		/* Activity 03 */
+		reg = <9>;
+		active-low;
+		function = "lan2";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@10 {
+		/* Activity 04 */
+		reg = <10>;
+		active-low;
+		function = "lan2";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@11 {
+		/* Activity 03 */
+		reg = <11>;
+		active-low;
+		function = "lan3";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@12 {
+		/* Activity 04 */
+		reg = <12>;
+		active-low;
+		function = "lan3";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+
+	led@13 {
+		/* Activity 03 */
+		reg = <13>;
+		active-low;
+		function = "lan4";
+		color = <LED_COLOR_ID_AMBER>;
+	};
+
+	led@14 {
+		/* Activity 04 */
+		reg = <14>;
+		active-low;
+		function = "lan4";
+		color = <LED_COLOR_ID_GREEN>;
+	};
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+
+	/* Winbond W29N02GV, 256MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		loader@0 {
+			label = "loader";
+			reg = <0x00000000 0x00400000>;
+		};
+		image@400000 {
+			label = "image";
+			reg = <0x00400000 0x0fb00000>;
+		};
+		/* 0x00ff0000-0x00ffffff: bad block list */
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+	phy4: ethernet-phy@4 {
+		reg = <4>;
+	};
+	phy21: ethernet-phy@21 {
+		reg = <21>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6846.dtsi b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
new file mode 100644
index 000000000000..f5591a45d2e4
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6846.dtsi
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6846", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x1b>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		leds: led-controller@800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		mdio: mdio@2060 {
+			compatible = "brcm,bcm6846-mdio";
+			reg = <0x02060 0x10>, <0x5a068 0x4>;
+			reg-names = "mdio", "mdio_indir_rw";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@59000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x59000 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6855.dtsi b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
new file mode 100644
index 000000000000..a88c3f0fbcb0
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6855.dtsi
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6855", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		leds: led-controller@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x3000 0xdc>;
+			status = "disabled";
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart1: serial@13000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x13000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm6878.dtsi b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
new file mode 100644
index 000000000000..dd837bf69390
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm6878.dtsi
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6878", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		watchdog@480 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x480 0x10>;
+		};
+
+		watchdog@4c0 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x4c0 0x10>;
+			status = "disabled";
+		};
+
+		/* GPIOs 0 .. 31 */
+		gpio0: gpio@500 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x500 0x04>, <0x520 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 32 .. 63 */
+		gpio1: gpio@504 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x504 0x04>, <0x524 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 64 .. 95 */
+		gpio2: gpio@508 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x508 0x04>, <0x528 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 96 .. 127 */
+		gpio3: gpio@50c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x50c 0x04>, <0x52c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 128 .. 159 */
+		gpio4: gpio@510 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x510 0x04>, <0x530 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 160 .. 191 */
+		gpio5: gpio@514 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x514 0x04>, <0x534 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 192 .. 223 */
+		gpio6: gpio@518 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x518 0x04>, <0x538 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		/* GPIOs 224 .. 255 */
+		gpio7: gpio@51c {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x51c 0x04>, <0x53c 0x04>;
+			reg-names = "dirout", "dat";
+			gpio-controller;
+			#gpio-cells = <2>;
+			status = "disabled";
+		};
+
+		rng@b80 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0xb80 0x28>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		leds: led-controller@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-leds";
+			reg = <0x700 0xdc>;
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
+		pl081_dma: dma-controller@11000 {
+			compatible = "arm,pl081", "arm,primecell";
+			// The magic B105F00D info is missing
+			arm,primecell-periphid = <0x00041081>;
+			reg = <0x11000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			clocks = <&periph_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <2>;
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/broadcom/bcm7445-bcm97445svmb.dts
index 8313b7cad542..f92d2cf85972 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/broadcom/bcm7445-bcm97445svmb.dts
@@ -14,10 +14,10 @@
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
index 58f67c9b830b..c6307c7437e3 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm7445.dtsi
@@ -148,7 +148,7 @@
 			reg-names = "aon-ctrl", "aon-sram";
 		};
 
-		nand: nand@3e2800 {
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -237,7 +237,8 @@
 			ranges = <0x0 0x0 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -259,7 +260,8 @@
 			ranges = <0x0 0x80000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
@@ -281,7 +283,8 @@
 			ranges = <0x0 0x100000 0x80000>;
 
 			memc-ddr@2000 {
-				compatible = "brcm,brcmstb-memc-ddr";
+				compatible = "brcm,brcmstb-memc-ddr-rev-b.1.x",
+					     "brcm,brcmstb-memc-ddr";
 				reg = <0x2000 0x800>;
 			};
 
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/broadcom/bcm911360_entphn.dts
index b2d323f4a5ab..363009e747b3 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/broadcom/bcm911360_entphn.dts
@@ -47,10 +47,10 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		hook {
+		button-hook {
 			label = "HOOK";
 			linux,code = <KEY_O>;
 			gpios = <&gpio_asiu 48 0>;
@@ -82,8 +82,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/broadcom/bcm911360k.dts
index 091c73a46e08..091c73a46e08 100644
--- a/arch/arm/boot/dts/bcm911360k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm911360k.dts
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/broadcom/bcm94708.dts
index 3d13e46c6949..d9eb2040b963 100644
--- a/arch/arm/boot/dts/bcm94708.dts
+++ b/arch/arm/boot/dts/broadcom/bcm94708.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94708)";
 	compatible = "brcm,bcm94708", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/broadcom/bcm94709.dts
index 5017b7b259cb..618c812eef73 100644
--- a/arch/arm/boot/dts/bcm94709.dts
+++ b/arch/arm/boot/dts/broadcom/bcm94709.dts
@@ -38,7 +38,7 @@
 	model = "NorthStar SVK (BCM94709)";
 	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
index b0b8c774a37f..0b8727ae6f16 100644
--- a/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm947189acdbmr.dts
@@ -25,17 +25,17 @@
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		5ghz {
+		led-5ghz {
 			label = "bcm53xx:blue:5ghz";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -44,13 +44,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
@@ -60,9 +60,9 @@
 	spi {
 		compatible = "spi-gpio";
 		num-chipselects = <1>;
-		gpio-sck = <&chipcommon 21 0>;
-		gpio-miso = <&chipcommon 22 0>;
-		gpio-mosi = <&chipcommon 23 0>;
+		sck-gpios = <&chipcommon 21 0>;
+		miso-gpios = <&chipcommon 22 0>;
+		mosi-gpios = <&chipcommon 23 0>;
 		cs-gpios = <&chipcommon 24 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/broadcom/bcm947622.dts b/arch/arm/boot/dts/broadcom/bcm947622.dts
new file mode 100644
index 000000000000..6241485408d3
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm947622.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm47622.dtsi"
+
+/ {
+	model = "Broadcom BCM947622 Reference Board";
+	compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/broadcom/bcm953012er.dts
index 957468224622..d939ec9f4a9e 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012er.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Enterprise Router (BCM953012ER)";
-	compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708";
 
 	memory@0 {
 		device_type = "memory";
@@ -47,13 +47,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
@@ -69,9 +69,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			label = "port0";
@@ -87,6 +84,14 @@
 			label = "cpu";
 			ethernet = <&gmac0>;
 		};
+
+		port@7 {
+			status = "disabled";
+		};
+
+		port@8 {
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
index 9140be7ec053..b728cd54715e 100644
--- a/arch/arm/boot/dts/bcm953012hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar HR (BCM953012HR)";
-	compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708";
 
 	aliases {
 		ethernet0 = &gmac0;
@@ -74,7 +74,6 @@
 &spi_nor {
 	status = "okay";
 	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
 
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/broadcom/bcm953012k.dts
index 046c59fb4846..27c0992f1855 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm953012k.dts
@@ -36,7 +36,7 @@
 
 / {
 	model = "NorthStar SVK (BCM953012K)";
-	compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
+	compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
 
 	aliases {
 		serial0 = &uart0;
@@ -49,8 +49,8 @@
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -84,7 +84,6 @@
 &spi_nor {
 	status = "okay";
 	spi-max-frequency = <62500000>;
-	m25p,default-addr-width = <3>;
 
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/broadcom/bcm958300k.dts
index b4a1392bd5a6..dda3e11b711f 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958300k.dts
@@ -60,8 +60,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/broadcom/bcm958305k.dts
index 3378683321d3..ea3c6b88b313 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958305k.dts
@@ -68,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@1 {
+&nand_controller {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/broadcom/bcm958522er.dts
index 8c388eb8a08f..2f20f86bd31c 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958522er.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958522ER)";
-	compatible = "brcm,bcm58522", "brcm,nsp";
+	compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -58,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -70,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -130,8 +134,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -174,3 +178,7 @@
 &xhci {
 	status = "okay";
 };
+
+&srab {
+	compatible = "brcm,bcm58522-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/broadcom/bcm958525er.dts
index c339771bb22e..980c03f74a19 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958525er.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958525ER)";
-	compatible = "brcm,bcm58525", "brcm,nsp";
+	compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -58,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -70,8 +74,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -130,8 +134,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -186,3 +190,7 @@
 &xhci {
 	status = "okay";
 };
+
+&srab {
+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
index 1c72ec8288de..440bb2d617f2 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958525xmc.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus XMC (BCM958525xmc)";
-	compatible = "brcm,bcm58525", "brcm,nsp";
+	compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -58,6 +58,10 @@
 
 /* XHCI support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -86,8 +90,8 @@
 	};
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -146,8 +150,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -192,7 +196,7 @@
 };
 
 &sdio {
-	status = "ok";
+	status = "okay";
 };
 
 &uart0 {
@@ -206,3 +210,7 @@
 &xhci {
 	status = "okay";
 };
+
+&srab {
+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
index 96a021cebd97..116f3a7c3bc6 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958622hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958622HR)";
-	compatible = "brcm,bcm58622", "brcm,nsp";
+	compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -58,6 +58,10 @@
 
 /* USB 3 and SLIC support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -74,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -134,8 +138,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -172,9 +176,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
index b2c7f21d471e..fc6ab73ecf56 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958623hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958623HR)";
-	compatible = "brcm,bcm58623", "brcm,nsp";
+	compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -58,6 +58,10 @@
 
 /* USB 3 and SLIC support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -74,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -138,8 +142,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -176,9 +180,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
new file mode 100644
index 000000000000..c54451dde6dd
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-alamo.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:wan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:wan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:wan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:wan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&axi {
+	mdio-mux@3f1c0 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		reg = <0x3f1c0 0x4>;
+		mux-mask = <0x2000>;
+		mdio-parent-bus = <&mdio_ext>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port6: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port7: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port8: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port9: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port10: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <1 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii1>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan8";
+						phy-handle = <&phy_port6>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan9";
+						phy-handle = <&phy_port7>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan10";
+						phy-handle = <&phy_port8>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan11";
+						phy-handle = <&phy_port9>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan12";
+						phy-handle = <&phy_port10>;
+					};
+				};
+			};
+		};
+
+		mdio-mii@2000 {
+			reg = <0x2000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <2 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii0>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan3";
+						phy-handle = <&phy_port1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan4";
+						phy-handle = <&phy_port2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan5";
+						phy-handle = <&phy_port3>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan6";
+						phy-handle = <&phy_port4>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan7";
+						phy-handle = <&phy_port5>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		port@0 {
+			label = "wan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "wan2";
+			reg = <1>;
+		};
+
+		sgmii0: port@4 {
+			label = "sw0";
+			reg = <4>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		sgmii1: port@5 {
+			label = "sw1";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
new file mode 100644
index 000000000000..1830844c8404
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-kingpin.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:lan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:lan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:lan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:lan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* green:lan3-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			/* green:lan3-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <5>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			/* green:lan4-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			/* green:lan4-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <7>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			/* green:wan-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <8>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			/* green:wan-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <9>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
+		};
+
+		led-a {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-b {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "lan2";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "lan3";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "lan4";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "wan";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts
new file mode 100644
index 000000000000..9944566c1195
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64-a0.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64(A0)";
+	compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts
new file mode 100644
index 000000000000..06939438e874
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64";
+	compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts
new file mode 100644
index 000000000000..112fddb1eed8
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w-a0.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W(A0)";
+	compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts
new file mode 100644
index 000000000000..de2e367c3e78
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx64w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W";
+	compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts
new file mode 100644
index 000000000000..d1b684dcdbfa
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65";
+	compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts
new file mode 100644
index 000000000000..a2165aba3676
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx65w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65W.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65W";
+	compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..7e71aecb7251
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 1 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 2 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 3 50000 0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&amac2 {
+	status = "okay";
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_address: mac-address@66 {
+				reg = <0x66 0x6>;
+			};
+		};
+	};
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "shmoo";
+			reg = <0x80000 0x80000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+		};
+
+		partition@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+		};
+
+		partition@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x3f700000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_leds>;
+
+	pwm_leds: pwm_leds {
+		function = "pwm";
+		groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
index a2c9de35ddfb..a9b6aa04d573 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958625HR)";
-	compatible = "brcm,bcm58625", "brcm,nsp";
+	compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -55,18 +55,9 @@
 		priority = <200>;
 	};
 
-	/* Hardware I2C block cannot do more than 63 bytes per transfer,
-	 * which would prevent reading from a SFP's EEPROM (256 byte).
-	 */
-	i2c1: i2c {
-		compatible = "i2c-gpio";
-		sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-		scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	};
-
 	sfp: sfp {
 		compatible = "sff,sfp";
-		i2c-bus = <&i2c1>;
+		i2c-bus = <&i2c0>;
 		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
 		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
 		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
@@ -74,6 +65,14 @@
 	};
 };
 
+&i2c0 {
+	status = "okay";
+};
+
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -90,8 +89,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -150,8 +149,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -196,9 +195,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/broadcom/bcm958625k.dts
index 3fcca12d83c2..7996116fc923 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/broadcom/bcm958625k.dts
@@ -36,7 +36,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM958625K)";
-	compatible = "brcm,bcm58625", "brcm,nsp";
+	compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -48,6 +48,10 @@
 	};
 };
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -64,8 +68,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -149,8 +153,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -204,7 +208,7 @@
 &sdio {
 	bus-width = <4>;
 	no-1-8-v;
-	status = "ok";
+	status = "okay";
 };
 
 &srab {
@@ -212,9 +216,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
diff --git a/arch/arm/boot/dts/broadcom/bcm963138.dts b/arch/arm/boot/dts/broadcom/bcm963138.dts
new file mode 100644
index 000000000000..7fd87e05ec20
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963138.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	model = "Broadcom BCM963138 Reference Board";
+	compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963138dvt.dts b/arch/arm/boot/dts/broadcom/bcm963138dvt.dts
new file mode 100644
index 000000000000..f60d09908ab9
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963138dvt.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Broadcom BCM63138 Reference Board DTS
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138DVT";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+	brcm,nand-oob-sector-size = <16>;
+	nand-on-flash-bbt;
+};
+
+&ahci {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963148.dts b/arch/arm/boot/dts/broadcom/bcm963148.dts
new file mode 100644
index 000000000000..44bca063a327
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963148.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63148.dtsi"
+
+/ {
+	model = "Broadcom BCM963148 Reference Board";
+	compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm963178.dts b/arch/arm/boot/dts/broadcom/bcm963178.dts
new file mode 100644
index 000000000000..098a222cd71a
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm963178.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+	model = "Broadcom BCM963178 Reference Board";
+	compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96756.dts b/arch/arm/boot/dts/broadcom/bcm96756.dts
new file mode 100644
index 000000000000..402038d3cd0c
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96756.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6756.dtsi"
+
+/ {
+	model = "Broadcom BCM96756 Reference Board";
+	compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96846.dts b/arch/arm/boot/dts/broadcom/bcm96846.dts
new file mode 100644
index 000000000000..943896afb7cc
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96846.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+	model = "Broadcom BCM96846 Reference Board";
+	compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96855.dts b/arch/arm/boot/dts/broadcom/bcm96855.dts
new file mode 100644
index 000000000000..571663d9a1ea
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96855.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6855.dtsi"
+
+/ {
+	model = "Broadcom BCM96855 Reference Board";
+	compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm96878.dts b/arch/arm/boot/dts/broadcom/bcm96878.dts
new file mode 100644
index 000000000000..8d6eddd54c6e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm96878.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+	model = "Broadcom BCM96878 Reference Board";
+	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
+
+&nand_controller {
+	brcm,wp-not-connected;
+	status = "okay";
+};
+
+&nandcs {
+	nand-on-flash-bbt;
+	brcm,nand-ecc-use-strap;
+};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
index edd0f630e025..663a3f27b6e4 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/broadcom/bcm988312hr.dts
@@ -37,7 +37,7 @@
 
 / {
 	model = "NorthStar Plus SVK (BCM988312HR)";
-	compatible = "brcm,bcm88312", "brcm,nsp";
+	compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -58,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
@@ -74,8 +78,8 @@
 	status = "okay";
 };
 
-&nand {
-	nandcs@0 {
+&nand_controller {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-on-flash-bbt;
@@ -134,8 +138,8 @@
 };
 
 &qspi {
-	bspi-sel = <0>;
-	flash: m25p80@0 {
+	status = "okay";
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "m25p80";
@@ -184,9 +188,6 @@
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			label = "port0";
 			reg = <0>;
diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/broadcom/bcm9hmidc.dtsi
index 65397c088335..65397c088335 100644
--- a/arch/arm/boot/dts/bcm9hmidc.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm9hmidc.dtsi
diff --git a/arch/arm/boot/dts/calxeda/Makefile b/arch/arm/boot/dts/calxeda/Makefile
new file mode 100644
index 000000000000..f5126b6d26ad
--- /dev/null
+++ b/arch/arm/boot/dts/calxeda/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
+	ecx-2000.dtb
+dtb-$(CONFIG_ARCH_HIGHBANK) += \
+	highbank.dtb \
+	ecx-2000.dtb
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/calxeda/ecx-2000.dts
index 5651ae6dc969..f6eb71553b95 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/calxeda/ecx-2000.dts
@@ -13,7 +13,6 @@
 	compatible = "calxeda,ecx-2000";
 	#address-cells = <2>;
 	#size-cells = <2>;
-	clock-ranges;
 
 	cpus {
 		#address-cells = <1>;
@@ -83,8 +82,7 @@
 		intc: interrupt-controller@fff11000 {
 			compatible = "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
+			#address-cells = <0>;
 			interrupt-controller;
 			interrupts = <1 9 0xf04>;
 			reg = <0xfff11000 0x1000>,
@@ -95,7 +93,7 @@
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/calxeda/ecx-common.dtsi
index 66ee1d34f72b..ce5221c6b358 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/calxeda/ecx-common.dtsi
@@ -9,11 +9,11 @@
 	};
 
 	psci {
-		compatible	= "arm,psci";
-		method		= "smc";
-		cpu_suspend	= <0x84000002>;
-		cpu_off		= <0x84000004>;
-		cpu_on		= <0x84000006>;
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000002>;
+		cpu_off = <0x84000004>;
+		cpu_on = <0x84000006>;
 	};
 
 	soc {
@@ -27,10 +27,11 @@
 			reg = <0xffe08000 0x10000>;
 			interrupts = <0 83 4>;
 			dma-coherent;
-			calxeda,port-phys = <&combophy5 0 &combophy0 0
-					     &combophy0 1 &combophy0 2
-					     &combophy0 3>;
-			calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+			calxeda,port-phys = < &combophy5 0>, <&combophy0 0>,
+					     <&combophy0 1>, <&combophy0 2>,
+					     <&combophy0 3>;
+			calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>,
+					    <&gpioh 7 1>;
 			calxeda,led-order = <4 0 1 2 3>;
 		};
 
@@ -114,8 +115,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xfff36000 0x1000>;
 			interrupts = <0 20 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
+			clocks = <&pclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		smic@fff3a000 {
@@ -202,14 +203,14 @@
 		ethernet@fff50000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff50000 0x1000>;
-			interrupts = <0 77 4  0 78 4  0 79 4>;
+			interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
 			dma-coherent;
 		};
 
 		ethernet@fff51000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff51000 0x1000>;
-			interrupts = <0 80 4  0 81 4  0 82 4>;
+			interrupts = <0 80 4>, <0 81 4>, <0 82 4>;
 			dma-coherent;
 		};
 
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/calxeda/highbank.dts
index f4e4dca6f7e7..b6b0225a769e 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/calxeda/highbank.dts
@@ -13,7 +13,6 @@
 	compatible = "calxeda,highbank";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	clock-ranges;
 
 	cpus {
 		#address-cells = <1>;
@@ -96,7 +95,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		name = "memory";
 		device_type = "memory";
 		reg = <0x00000000 0xff900000>;
@@ -128,14 +127,12 @@
 		intc: interrupt-controller@fff11000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
 			interrupt-controller;
 			reg = <0xfff11000 0x1000>,
 			      <0xfff10100 0x100>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0xfff12000 0x1000>;
 			interrupts = <0 70 4>;
@@ -145,14 +142,14 @@
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
 		};
 
 
 		sregs@fff3c200 {
 			compatible = "calxeda,hb-sregs-l2-ecc";
 			reg = <0xfff3c200 0x100>;
-			interrupts = <0 71 4  0 72 4>;
+			interrupts = <0 71 4>, <0 72 4>;
 		};
 
 	};
diff --git a/arch/arm/boot/dts/cirrus/Makefile b/arch/arm/boot/dts/cirrus/Makefile
new file mode 100644
index 000000000000..e6015983e464
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
+dtb-$(CONFIG_ARCH_EP93XX) += \
+	ep93xx-edb9302.dtb \
+	ep93xx-bk3.dtb \
+	ep93xx-ts7250.dtb
diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/cirrus/ep7209.dtsi
index 365931f8b48d..57bdad2c1994 100644
--- a/arch/arm/boot/dts/ep7209.dtsi
+++ b/arch/arm/boot/dts/cirrus/ep7209.dtsi
@@ -10,6 +10,8 @@
 	model = "Cirrus Logic EP7209";
 	compatible = "cirrus,ep7209";
 
+	chosen { };
+
 	aliases {
 		gpio0 = &porta;
 		gpio1 = &portb;
@@ -108,6 +110,7 @@
 			compatible = "cirrus,ep7209-fb";
 			reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
 			clocks = <&clks CLPS711X_CLK_BUS>;
+			syscon = <&syscon1>;
 			status = "disabled";
 		};
 
@@ -132,7 +135,7 @@
 			#pwm-cells = <1>;
 		};
 
-		uart1: uart@80000480 {
+		uart1: serial@80000480 {
 			compatible = "cirrus,ep7209-uart";
 			reg = <0x80000480 0x80>;
 			interrupts = <12 13>;
@@ -147,6 +150,7 @@
 			reg = <0x80000500 0x4>;
 			interrupts = <15>;
 			clocks = <&clks CLPS711X_CLK_SPI>;
+			syscon = <&syscon3>;
 			status = "disabled";
 		};
 
@@ -155,7 +159,7 @@
 			reg = <0x80001100 0x80>;
 		};
 
-		uart2: uart@80001480 {
+		uart2: serial@80001480 {
 			compatible = "cirrus,ep7209-uart";
 			reg = <0x80001480 0x80>;
 			interrupts = <28 29>;
@@ -170,6 +174,7 @@
 			clocks = <&clks CLPS711X_CLK_PLL>;
 			clock-names = "pll";
 			interrupts = <32>;
+			syscon = <&syscon3>;
 			status = "disabled";
 		};
 
@@ -179,8 +184,17 @@
 		};
 	};
 
+	keypad: keypad {
+		compatible = "cirrus,ep7209-keypad";
+		interrupt-parent = <&intc>;
+		interrupts = <16>;
+		syscon = <&syscon1>;
+		status = "disabled";
+	};
+
 	mctrl: mctrl {
 		compatible = "cirrus,ep7209-mctrl-gpio";
+		gpio,syscon-dev = <&syscon1 0 0>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
index da076479c8e2..0b15ccaa762e 100644
--- a/arch/arm/boot/dts/ep7211-edb7211.dts
+++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
@@ -7,7 +7,7 @@
 	model = "Cirrus Logic EP7211 Development Board";
 	compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
 
-	memory {
+	memory@c0000000 {
 		device_type = "memory";
 		reg = <0xc0000000 0x02000000>;
 	};
@@ -30,7 +30,7 @@
 
 		display-timings {
 			native-mode = <&timing0>;
-			timing0: 320x240 {
+			timing0: timing-320x240 {
 				hactive = <320>;
 				hback-porch = <0>;
 				hfront-porch = <0>;
@@ -46,8 +46,8 @@
 
 	i2c: i2c {
 		compatible = "i2c-gpio";
-		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
-			<&portd 5 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&portd 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&portd 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;
 		i2c-gpio,scl-output-only;
 		#address-cells = <1>;
@@ -88,7 +88,7 @@
 };
 
 &portd {
-	lcden {
+	lcden-hog {
 		gpio-hog;
 		gpios = <2 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/cirrus/ep7211.dtsi
index 32a4e1237145..32a4e1237145 100644
--- a/arch/arm/boot/dts/ep7211.dtsi
+++ b/arch/arm/boot/dts/cirrus/ep7211.dtsi
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts
new file mode 100644
index 000000000000..40bc9b2a6ba8
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-bk3.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Liebherr controller BK3.1 based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	model = "Liebherr controller BK3.1";
+	compatible = "liebherr,bk3", "cirrus,ep9301";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x00000000 0x02000000>,
+		      <0x000530c0 0x01fdd000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&ebi {
+	nand-controller@60000000 {
+		compatible = "technologic,ts7200-nand";
+		reg = <0x60000000 0x8000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>;
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "System";
+					reg = <0x00000000 0x01e00000>;
+					read-only;
+				};
+
+				partition@1e00000 {
+					label = "Data";
+					reg = <0x01e00000 0x05f20000>;
+				};
+
+				partition@7d20000 {
+					label = "RedBoot";
+					reg = <0x07d20000 0x002e0000>;
+					read-only;
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&i2s {
+	dmas = <&dma0 0 1>, <&dma0 0 2>;
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_on_ac97_pins>;
+	status = "okay";
+};
+
+&gpio1 {
+	/* PWM */
+	gpio-ranges = <&syscon 6 163 1>;
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+	status = "okay";
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+	status = "okay";
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+	status = "okay";
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts
new file mode 100644
index 000000000000..312b2be1c638
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-edb9302.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+/*
+ * Device Tree file for Cirrus Logic EDB9302 board based on EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "cirrus,edb9302", "cirrus,ep9301";
+	model = "cirrus,edb9302";
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x0000000 0x800000>,
+		      <0x1000000 0x800000>,
+		      <0x4000000 0x800000>,
+		      <0x5000000 0x800000>;
+	};
+
+	sound {
+		compatible = "audio-graph-card2";
+		label = "EDB93XX";
+		links = <&i2s_port>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&ebi {
+	flash@60000000 {
+		compatible = "cfi-flash";
+		reg = <0x60000000 0x1000000>;
+		bank-width = <2>;
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&gpio0 {
+	gpio-ranges = <&syscon 0 153 1>,
+		      <&syscon 1 152 1>,
+		      <&syscon 2 151 1>,
+		      <&syscon 3 148 1>,
+		      <&syscon 4 147 1>,
+		      <&syscon 5 146 1>,
+		      <&syscon 6 145 1>,
+		      <&syscon 7 144 1>;
+};
+
+&gpio1 {
+	gpio-ranges = <&syscon 0 143 1>,
+		      <&syscon 1 142 1>,
+		      <&syscon 2 141 1>,
+		      <&syscon 3 140 1>,
+		      <&syscon 4 165 1>,
+		      <&syscon 5 164 1>,
+		      <&syscon 6 163 1>,
+		      <&syscon 7 160 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&syscon 0 115 1>;
+};
+
+/* edb9302 doesn't have GPIO Port D present */
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio5 {
+	gpio-ranges = <&syscon 1 170 1>,
+		      <&syscon 2 169 1>,
+		      <&syscon 3 168 1>;
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s_on_ac97_pins>;
+	status = "okay";
+	i2s_port: port {
+		i2s_ep: endpoint {
+			system-clock-direction-out;
+			frame-master;
+			bitclock-master;
+			mclk-fs = <256>;
+			dai-format = "i2s";
+			convert-channels = <2>;
+			convert-sample-format = "s32_le";
+			remote-endpoint = <&codec_ep>;
+		};
+	};
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&spi0 {
+	cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW
+		    &gpio0 7 GPIO_ACTIVE_LOW>;
+	dmas = <&dma1 10 2>, <&dma1 10 1>;
+	dma-names = "rx", "tx";
+	status = "okay";
+
+	cs4271: codec@0 {
+		compatible = "cirrus,cs4271";
+		reg = <0>;
+		#sound-dai-cells = <0>;
+		spi-max-frequency = <6000000>;
+		spi-cpol;
+		spi-cpha;
+		reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+		port {
+			codec_ep: endpoint {
+				remote-endpoint = <&i2s_ep>;
+			};
+		};
+	};
+
+	at25f1024: eeprom@1 {
+		compatible = "atmel,at25";
+		reg = <1>;
+		address-width = <8>;
+		size = <0x20000>;
+		pagesize = <256>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts
new file mode 100644
index 000000000000..9e03f93d9fc8
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx-ts7250.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Technologic Systems ts7250 board based on Cirrus EP9302 SoC
+ */
+/dts-v1/;
+#include "ep93xx.dtsi"
+
+/ {
+	compatible = "technologic,ts7250", "cirrus,ep9301";
+	model = "TS-7250 SBC";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+	};
+
+	memory@0 {
+		device_type = "memory";
+		/* should be set from ATAGS */
+		reg = <0x00000000 0x02000000>,
+		      <0x000530c0 0x01fdd000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "grled";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+
+		led-1 {
+			label = "rdled";
+			gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_FAULT;
+		};
+	};
+};
+
+&ebi {
+	nand-controller@60000000 {
+		compatible = "technologic,ts7200-nand";
+		reg = <0x60000000 0x8000000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		nand@0 {
+			reg = <0>;
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "TS-BOOTROM";
+					reg = <0x00000000 0x00020000>;
+					read-only;
+				};
+
+				partition@20000 {
+					label = "Linux";
+					reg = <0x00020000 0x07d00000>;
+				};
+
+				partition@7d20000 {
+					label = "RedBoot";
+					reg = <0x07d20000 0x002e0000>;
+					read-only;
+				};
+			};
+		};
+	};
+
+	rtc@10800000 {
+		compatible = "st,m48t86";
+		reg = <0x10800000 0x1>,
+			<0x11700000 0x1>;
+	};
+
+	watchdog@23800000 {
+		compatible = "technologic,ts7200-wdt";
+		reg = <0x23800000 0x01>,
+			<0x23c00000 0x01>;
+		timeout-sec = <30>;
+	};
+};
+
+&eth0 {
+	phy-handle = <&phy0>;
+};
+
+&gpio1 {
+	/* PWM */
+	gpio-ranges = <&syscon 6 163 1>;
+};
+
+/* ts7250 doesn't have GPIO Port D present */
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	gpio-ranges = <&syscon 0 97 2>;
+};
+
+&gpio6 {
+	gpio-ranges = <&syscon 0 87 2>;
+};
+
+&gpio7 {
+	gpio-ranges = <&syscon 2 199 4>;
+};
+
+&spi0 {
+	cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	dmas = <&dma1 10 2>, <&dma1 10 1>;
+	dma-names = "rx", "tx";
+	status = "okay";
+
+	tmp122: temperature-sensor@0 {
+		compatible = "ti,tmp122";
+		reg = <0>;
+		spi-max-frequency = <2000000>;
+	};
+};
+
+&mdio0 {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep93xx.dtsi b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
new file mode 100644
index 000000000000..0dd1eee346ca
--- /dev/null
+++ b/arch/arm/boot/dts/cirrus/ep93xx.dtsi
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Cirrus Logic systems EP93XX SoC
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+/ {
+	soc: soc {
+		compatible = "simple-bus";
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		syscon: syscon@80930000 {
+			compatible = "cirrus,ep9301-syscon", "syscon";
+			reg = <0x80930000 0x1000>;
+
+			#clock-cells = <1>;
+			clocks = <&xtali>;
+
+			spi_default_pins: pins-spi {
+				function = "spi";
+				groups = "ssp";
+			};
+
+			ac97_default_pins: pins-ac97 {
+				function = "ac97";
+				groups = "ac97";
+			};
+
+			i2s_on_ssp_pins: pins-i2sonssp {
+				function = "i2s";
+				groups = "i2s_on_ssp";
+			};
+
+			i2s_on_ac97_pins: pins-i2sonac97 {
+				function = "i2s";
+				groups = "i2s_on_ac97";
+			};
+
+			gpio1_default_pins: pins-gpio1 {
+				function = "gpio";
+				groups = "gpio1agrp";
+			};
+
+			pwm1_default_pins: pins-pwm1 {
+				function = "pwm";
+				groups = "pwm1";
+			};
+
+			gpio2_default_pins: pins-gpio2 {
+				function = "gpio";
+				groups = "gpio2agrp";
+			};
+
+			gpio3_default_pins: pins-gpio3 {
+				function = "gpio";
+				groups = "gpio3agrp";
+			};
+
+			keypad_default_pins: pins-keypad {
+				function = "keypad";
+				groups = "keypadgrp";
+			};
+
+			gpio4_default_pins: pins-gpio4 {
+				function = "gpio";
+				groups = "gpio4agrp";
+			};
+
+			gpio6_default_pins: pins-gpio6 {
+				function = "gpio";
+				groups = "gpio6agrp";
+			};
+
+			gpio7_default_pins: pins-gpio7 {
+				function = "gpio";
+				groups = "gpio7agrp";
+			};
+
+			ide_default_pins: pins-ide {
+				function = "pata";
+				groups = "idegrp";
+			};
+
+			lcd_on_dram0_pins: pins-rasteronsdram0 {
+				function = "lcd";
+				groups = "rasteronsdram0grp";
+			};
+
+			lcd_on_dram3_pins: pins-rasteronsdram3 {
+				function = "lcd";
+				groups = "rasteronsdram3grp";
+			};
+		};
+
+		adc: adc@80900000 {
+			compatible = "cirrus,ep9301-adc";
+			reg = <0x80900000 0x28>;
+			clocks = <&syscon EP93XX_CLK_ADC>;
+			interrupt-parent = <&vic0>;
+			interrupts = <30>;
+			status = "disabled";
+		};
+
+		/*
+		 * The EP93XX expansion bus is a set of up to 7 each up to 16MB
+		 * windows in the 256MB space from 0x50000000 to 0x5fffffff.
+		 * But since we don't require to setup it in any way, we can
+		 * represent it as a simple-bus.
+		 */
+		ebi: bus@80080000 {
+			compatible = "simple-bus";
+			reg = <0x80080000 0x20>;
+			native-endian;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+		};
+
+		dma0: dma-controller@80000000 {
+			compatible = "cirrus,ep9301-dma-m2p";
+			reg = <0x80000000 0x0040>,
+			      <0x80000040 0x0040>,
+			      <0x80000080 0x0040>,
+			      <0x800000c0 0x0040>,
+			      <0x80000240 0x0040>,
+			      <0x80000200 0x0040>,
+			      <0x800002c0 0x0040>,
+			      <0x80000280 0x0040>,
+			      <0x80000340 0x0040>,
+			      <0x80000300 0x0040>;
+			clocks = <&syscon EP93XX_CLK_M2P0>,
+				 <&syscon EP93XX_CLK_M2P1>,
+				 <&syscon EP93XX_CLK_M2P2>,
+				 <&syscon EP93XX_CLK_M2P3>,
+				 <&syscon EP93XX_CLK_M2P4>,
+				 <&syscon EP93XX_CLK_M2P5>,
+				 <&syscon EP93XX_CLK_M2P6>,
+				 <&syscon EP93XX_CLK_M2P7>,
+				 <&syscon EP93XX_CLK_M2P8>,
+				 <&syscon EP93XX_CLK_M2P9>;
+			clock-names = "m2p0", "m2p1",
+				      "m2p2", "m2p3",
+				      "m2p4", "m2p5",
+				      "m2p6", "m2p7",
+				      "m2p8", "m2p9";
+			interrupt-parent = <&vic0>;
+			interrupts = <7>, <8>, <9>, <10>, <11>,
+				<12>, <13>, <14>, <15>, <16>;
+			#dma-cells = <2>;
+		};
+
+		dma1: dma-controller@80000100 {
+			compatible = "cirrus,ep9301-dma-m2m";
+			reg = <0x80000100 0x0040>,
+			      <0x80000140 0x0040>;
+			clocks = <&syscon EP93XX_CLK_M2M0>,
+				 <&syscon EP93XX_CLK_M2M1>;
+			clock-names = "m2m0", "m2m1";
+			interrupt-parent = <&vic0>;
+			interrupts = <17>, <18>;
+			#dma-cells = <2>;
+		};
+
+		eth0: ethernet@80010000 {
+			compatible = "cirrus,ep9301-eth";
+			reg = <0x80010000 0x10000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <7>;
+			mdio0: mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		gpio0: gpio@80840000 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840000 0x04>,
+			      <0x80840010 0x04>,
+			      <0x80840090 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+		};
+
+		gpio1: gpio@80840004 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840004 0x04>,
+			      <0x80840014 0x04>,
+			      <0x808400ac 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&vic1>;
+			interrupts = <27>;
+		};
+
+		gpio2: gpio@80840008 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840008 0x04>,
+			      <0x80840018 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio2_default_pins>;
+		};
+
+		gpio3: gpio@8084000c {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x8084000c 0x04>,
+			      <0x8084001c 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio3_default_pins>;
+		};
+
+		gpio4: gpio@80840020 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840020 0x04>,
+			      <0x80840024 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio4_default_pins>;
+		};
+
+		gpio5: gpio@80840030 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840030 0x04>,
+			      <0x80840034 0x04>,
+			      <0x8084004c 0x1c>;
+			reg-names = "data", "dir", "intr";
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts-extended = <&vic0 19>, <&vic0 20>,
+					      <&vic0 21>, <&vic0 22>,
+					      <&vic1 15>, <&vic1 16>,
+					      <&vic1 17>, <&vic1 18>;
+		};
+
+		gpio6: gpio@80840038 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840038 0x04>,
+			      <0x8084003c 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio6_default_pins>;
+		};
+
+		gpio7: gpio@80840040 {
+			compatible = "cirrus,ep9301-gpio";
+			reg = <0x80840040 0x04>,
+			      <0x80840044 0x04>;
+			reg-names = "data", "dir";
+			gpio-controller;
+			#gpio-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio7_default_pins>;
+		};
+
+		i2s: i2s@80820000 {
+			compatible = "cirrus,ep9301-i2s";
+			reg = <0x80820000 0x100>;
+			#sound-dai-cells = <0>;
+			interrupt-parent = <&vic1>;
+			interrupts = <28>;
+			clocks = <&syscon EP93XX_CLK_I2S_MCLK>,
+				 <&syscon EP93XX_CLK_I2S_SCLK>,
+				 <&syscon EP93XX_CLK_I2S_LRCLK>;
+			clock-names = "mclk", "sclk", "lrclk";
+			dmas = <&dma0 0 1>, <&dma0 0 2>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		ide: ide@800a0000 {
+			compatible = "cirrus,ep9312-pata";
+			reg = <0x800a0000 0x38>;
+			interrupt-parent = <&vic1>;
+			interrupts = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ide_default_pins>;
+			status = "disabled";
+		};
+
+		vic0: interrupt-controller@800b0000 {
+			compatible = "arm,pl192-vic";
+			reg = <0x800b0000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-mask = <0x7ffffffc>;
+			valid-wakeup-mask = <0x0>;
+		};
+
+		vic1: interrupt-controller@800c0000 {
+			compatible = "arm,pl192-vic";
+			reg = <0x800c0000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-mask = <0x1fffffff>;
+			valid-wakeup-mask = <0x0>;
+		};
+
+		keypad: keypad@800f0000 {
+			compatible = "cirrus,ep9307-keypad";
+			reg = <0x800f0000 0x0c>;
+			interrupt-parent = <&vic0>;
+			interrupts = <29>;
+			clocks = <&syscon EP93XX_CLK_KEYPAD>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&keypad_default_pins>;
+			linux,keymap =	<KEY_UP>,
+					<KEY_DOWN>,
+					<KEY_VOLUMEDOWN>,
+					<KEY_HOME>,
+					<KEY_RIGHT>,
+					<KEY_LEFT>,
+					<KEY_ENTER>,
+					<KEY_VOLUMEUP>,
+					<KEY_F6>,
+					<KEY_F8>,
+					<KEY_F9>,
+					<KEY_F10>,
+					<KEY_F1>,
+					<KEY_F2>,
+					<KEY_F3>,
+					<KEY_POWER>;
+		};
+
+		pwm0: pwm@80910000 {
+			compatible = "cirrus,ep9301-pwm";
+			reg = <0x80910000 0x10>;
+			clocks = <&syscon EP93XX_CLK_PWM>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@80910020 {
+			compatible = "cirrus,ep9301-pwm";
+			reg = <0x80910020 0x10>;
+			clocks = <&syscon EP93XX_CLK_PWM>;
+			#pwm-cells = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwm1_default_pins>;
+			status = "disabled";
+		};
+
+		rtc0: rtc@80920000 {
+			compatible = "cirrus,ep9301-rtc";
+			reg = <0x80920000 0x100>;
+		};
+
+		spi0: spi@808a0000 {
+			compatible = "cirrus,ep9301-spi";
+			reg = <0x808a0000 0x18>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&vic1>;
+			interrupts = <21>;
+			clocks = <&syscon EP93XX_CLK_SPI>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi_default_pins>;
+			status = "disabled";
+		};
+
+		timer: timer@80810000 {
+			compatible = "cirrus,ep9301-timer";
+			reg = <0x80810000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <19>;
+		};
+
+		uart0: serial@808c0000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x808c0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART1>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "uartclk", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		uart1: uart@808d0000 {
+			compatible = "arm,primecell";
+			reg = <0x808d0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART2>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "apb:uart2", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
+		uart2: uart@808b0000 {
+			compatible = "arm,primecell";
+			reg = <0x808b0000 0x1000>;
+			arm,primecell-periphid = <0x00041010>;
+			clocks = <&syscon EP93XX_CLK_UART3>, <&syscon EP93XX_CLK_UART>;
+			clock-names = "apb:uart3", "apb_pclk";
+			interrupt-parent = <&vic1>;
+			interrupts = <23>;
+			status = "disabled";
+		};
+
+		usb0: usb@80020000 {
+			compatible = "generic-ohci";
+			reg = <0x80020000 0x10000>;
+			interrupt-parent = <&vic1>;
+			interrupts = <24>;
+			clocks = <&syscon EP93XX_CLK_USB>;
+			status = "disabled";
+		};
+
+		watchdog0: watchdog@80940000 {
+			compatible = "cirrus,ep9301-wdt";
+			reg = <0x80940000 0x08>;
+		};
+	};
+
+	xtali: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <14745600>;
+		clock-output-names = "xtali";
+	};
+};
diff --git a/arch/arm/boot/dts/cnxt/Makefile b/arch/arm/boot/dts/cnxt/Makefile
new file mode 100644
index 000000000000..d49df53f65a1
--- /dev/null
+++ b/arch/arm/boot/dts/cnxt/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+	cx92755_equinox.dtb
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cnxt/cx92755.dtsi
index d2e8f36f8c60..227675fbe820 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cnxt/cx92755.dtsi
@@ -107,7 +107,7 @@
 		reg = <0xf00003a0 0x10>;
 	};
 
-	uart0: uart@f0000740 {
+	uart0: serial@f0000740 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000740 0x20>;
 		clocks = <&main_clk>;
@@ -115,7 +115,7 @@
 		status = "disabled";
 	};
 
-	uart1: uart@f0000760 {
+	uart1: serial@f0000760 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000760 0x20>;
 		clocks = <&main_clk>;
@@ -123,7 +123,7 @@
 		status = "disabled";
 	};
 
-	uart2: uart@f0000780 {
+	uart2: serial@f0000780 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000780 0x20>;
 		clocks = <&main_clk>;
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cnxt/cx92755_equinox.dts
index 026f556c8c50..026f556c8c50 100644
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ b/arch/arm/boot/dts/cnxt/cx92755_equinox.dts
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
index 4a0c1037fbc0..55c4744fa7e7 100644
--- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -6,102 +6,18 @@
 */
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/input/cros-ec-keyboard.h>
 
 &cros_ec {
-	keyboard-controller {
+	keyboard_controller: keyboard-controller {
 		compatible = "google,cros-ec-keyb";
 		keypad,num-rows = <8>;
 		keypad,num-columns = <13>;
 		google,needs-ghost-filter;
 
 		linux,keymap = <
-			MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
-			MATRIX_KEY(0x00, 0x02, KEY_F1)
-			MATRIX_KEY(0x00, 0x03, KEY_B)
-			MATRIX_KEY(0x00, 0x04, KEY_F10)
-			MATRIX_KEY(0x00, 0x05, KEY_RO)
-			MATRIX_KEY(0x00, 0x06, KEY_N)
-			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
-			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
-
-			MATRIX_KEY(0x01, 0x01, KEY_ESC)
-			MATRIX_KEY(0x01, 0x02, KEY_F4)
-			MATRIX_KEY(0x01, 0x03, KEY_G)
-			MATRIX_KEY(0x01, 0x04, KEY_F7)
-			MATRIX_KEY(0x01, 0x06, KEY_H)
-			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
-			MATRIX_KEY(0x01, 0x09, KEY_F9)
-			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
-			MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
-
-			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
-			MATRIX_KEY(0x02, 0x01, KEY_TAB)
-			MATRIX_KEY(0x02, 0x02, KEY_F3)
-			MATRIX_KEY(0x02, 0x03, KEY_T)
-			MATRIX_KEY(0x02, 0x04, KEY_F6)
-			MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
-			MATRIX_KEY(0x02, 0x06, KEY_Y)
-			MATRIX_KEY(0x02, 0x07, KEY_102ND)
-			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
-			MATRIX_KEY(0x02, 0x09, KEY_F8)
-			MATRIX_KEY(0x02, 0x0a, KEY_YEN)
-
-			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
-			MATRIX_KEY(0x03, 0x02, KEY_F2)
-			MATRIX_KEY(0x03, 0x03, KEY_5)
-			MATRIX_KEY(0x03, 0x04, KEY_F5)
-			MATRIX_KEY(0x03, 0x06, KEY_6)
-			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
-			MATRIX_KEY(0x03, 0x09, KEY_F13)
-			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
-			MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
-
-			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
-			MATRIX_KEY(0x04, 0x01, KEY_A)
-			MATRIX_KEY(0x04, 0x02, KEY_D)
-			MATRIX_KEY(0x04, 0x03, KEY_F)
-			MATRIX_KEY(0x04, 0x04, KEY_S)
-			MATRIX_KEY(0x04, 0x05, KEY_K)
-			MATRIX_KEY(0x04, 0x06, KEY_J)
-			MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
-			MATRIX_KEY(0x04, 0x09, KEY_L)
-			MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
-			MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
-
-			MATRIX_KEY(0x05, 0x01, KEY_Z)
-			MATRIX_KEY(0x05, 0x02, KEY_C)
-			MATRIX_KEY(0x05, 0x03, KEY_V)
-			MATRIX_KEY(0x05, 0x04, KEY_X)
-			MATRIX_KEY(0x05, 0x05, KEY_COMMA)
-			MATRIX_KEY(0x05, 0x06, KEY_M)
-			MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
-			MATRIX_KEY(0x05, 0x08, KEY_SLASH)
-			MATRIX_KEY(0x05, 0x09, KEY_DOT)
-			MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
-
-			MATRIX_KEY(0x06, 0x01, KEY_1)
-			MATRIX_KEY(0x06, 0x02, KEY_3)
-			MATRIX_KEY(0x06, 0x03, KEY_4)
-			MATRIX_KEY(0x06, 0x04, KEY_2)
-			MATRIX_KEY(0x06, 0x05, KEY_8)
-			MATRIX_KEY(0x06, 0x06, KEY_7)
-			MATRIX_KEY(0x06, 0x08, KEY_0)
-			MATRIX_KEY(0x06, 0x09, KEY_9)
-			MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
-			MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
-			MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
-
-			MATRIX_KEY(0x07, 0x01, KEY_Q)
-			MATRIX_KEY(0x07, 0x02, KEY_E)
-			MATRIX_KEY(0x07, 0x03, KEY_R)
-			MATRIX_KEY(0x07, 0x04, KEY_W)
-			MATRIX_KEY(0x07, 0x05, KEY_I)
-			MATRIX_KEY(0x07, 0x06, KEY_U)
-			MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
-			MATRIX_KEY(0x07, 0x08, KEY_P)
-			MATRIX_KEY(0x07, 0x09, KEY_O)
-			MATRIX_KEY(0x07, 0x0b, KEY_UP)
-			MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
+			CROS_STD_TOP_ROW_KEYMAP
+			CROS_STD_MAIN_KEYMAP
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
deleted file mode 100644
index 95de9f214c14..000000000000
--- a/arch/arm/boot/dts/dm814x.dtsi
+++ /dev/null
@@ -1,649 +0,0 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/dm814x.h>
-
-/ {
-	compatible = "ti,dm814";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-		phy0 = &usb0_phy;
-		phy1 = &usb1_phy;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
-
-		usb: usb@47400000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47400000 0x1000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-
-			usb0_phy: usb-phy@47401300 {
-				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401300 0x100>;
-				reg-names = "phy";
-				ti,ctrl_mod = <&usb_ctrl_mod>;
-				#phy-cells = <0>;
-			};
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-am33xx";
-				reg = <0x47401400 0x400
-				       0x47401000 0x200>;
-				reg-names = "mc", "control";
-
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb0_phy>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-am33xx";
-				reg = <0x47401c00 0x400
-					0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "otg";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-				phys = <&usb1_phy>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				#dma-channels = <30>;
-				#dma-requests = <256>;
-			};
-		};
-
-		/*
-		 * See TRM "Table 1-317. L4LS Instance Summary" for hints.
-		 * It shows the module target agent registers though, so the
-		 * actual device is typically 0x1000 before the target agent
-		 * except in cases where the module is larger than 0x1000.
-		 */
-		l4ls: l4ls@48000000 {
-			compatible = "ti,dm814-l4ls", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48000000 0x2000000>;
-
-			i2c1: i2c@28000 {
-				compatible = "ti,omap4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "i2c1";
-				reg = <0x28000 0x1000>;
-				interrupts = <70>;
-			};
-
-			elm: elm@80000 {
-				compatible = "ti,814-elm";
-				ti,hwmods = "elm";
-				reg = <0x80000 0x2000>;
-				interrupts = <4>;
-			};
-
-			gpio1: gpio@32000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio1";
-				ti,gpio-always-on;
-				reg = <0x32000 0x2000>;
-				interrupts = <96>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@4c000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio2";
-				ti,gpio-always-on;
-				reg = <0x4c000 0x2000>;
-				interrupts = <98>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@1ac000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio3";
-				ti,gpio-always-on;
-				reg = <0x1ac000 0x2000>;
-				interrupts = <32>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@1ae000 {
-				compatible = "ti,omap4-gpio";
-				ti,hwmods = "gpio4";
-				ti,gpio-always-on;
-				reg = <0x1ae000 0x2000>;
-				interrupts = <62>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			i2c2: i2c@2a000 {
-				compatible = "ti,omap4-i2c";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "i2c2";
-				reg = <0x2a000 0x1000>;
-				interrupts = <71>;
-			};
-
-			mcspi1: spi@30000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x30000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <65>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi1";
-				dmas = <&edma 16 0 &edma 17 0
-					&edma 18 0 &edma 19 0
-					&edma 20 0 &edma 21 0
-					&edma 22 0 &edma 23 0>;
-
-				dma-names = "tx0", "rx0", "tx1", "rx1",
-					"tx2", "rx2", "tx3", "rx3";
-			};
-
-			mcspi2: spi@1a0000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x1a0000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <125>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi2";
-				dmas = <&edma 42 0 &edma 43 0
-					&edma 44 0 &edma 45 0>;
-				dma-names = "tx0", "rx0", "tx1", "rx1";
-			};
-
-			/* Board must configure dmas with edma_xbar for EDMA */
-			mcspi3: spi@1a2000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x1a2000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <126>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi3";
-			};
-
-			mcspi4: spi@1a4000 {
-				compatible = "ti,omap4-mcspi";
-				reg = <0x1a4000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <127>;
-				ti,spi-num-cs = <4>;
-				ti,hwmods = "mcspi4";
-			};
-
-			timer1: timer@2e000 {
-				compatible = "ti,dm814-timer";
-				reg = <0x2e000 0x2000>;
-				interrupts = <67>;
-				ti,hwmods = "timer1";
-				ti,timer-alwon;
-				clocks = <&timer1_fck>;
-				clock-names = "fck";
-			};
-
-			uart1: uart@20000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart1";
-				reg = <0x20000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <72>;
-				dmas = <&edma 26 0 &edma 27 0>;
-				dma-names = "tx", "rx";
-			};
-
-			uart2: uart@22000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart2";
-				reg = <0x22000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <73>;
-				dmas = <&edma 28 0 &edma 29 0>;
-				dma-names = "tx", "rx";
-			};
-
-			uart3: uart@24000 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
-				ti,hwmods = "uart3";
-				reg = <0x24000 0x2000>;
-				clock-frequency = <48000000>;
-				interrupts = <74>;
-				dmas = <&edma 30 0 &edma 31 0>;
-				dma-names = "tx", "rx";
-			};
-
-			timer2: timer@40000 {
-				compatible = "ti,dm814-timer";
-				reg = <0x40000 0x2000>;
-				interrupts = <68>;
-				ti,hwmods = "timer2";
-				clocks = <&timer2_fck>;
-				clock-names = "fck";
-			};
-
-			timer3: timer@42000 {
-				compatible = "ti,dm814-timer";
-				reg = <0x42000 0x2000>;
-				interrupts = <69>;
-				ti,hwmods = "timer3";
-			};
-
-			mmc1: mmc@60000 {
-				compatible = "ti,omap4-hsmmc";
-				ti,hwmods = "mmc1";
-				dmas = <&edma 24 0
-					&edma 25 0>;
-				dma-names = "tx", "rx";
-				interrupts = <64>;
-				interrupt-parent = <&intc>;
-				reg = <0x60000 0x1000>;
-			};
-
-			rtc: rtc@c0000 {
-				compatible = "ti,am3352-rtc", "ti,da830-rtc";
-				reg = <0xc0000 0x1000>;
-				interrupts = <75 76>;
-				ti,hwmods = "rtc";
-			};
-
-			mmc2: mmc@1d8000 {
-				compatible = "ti,omap4-hsmmc";
-				ti,hwmods = "mmc2";
-				dmas = <&edma 2 0
-					&edma 3 0>;
-				dma-names = "tx", "rx";
-				interrupts = <28>;
-				interrupt-parent = <&intc>;
-				reg = <0x1d8000 0x1000>;
-			};
-
-			control: control@140000 {
-				compatible = "ti,dm814-scm", "simple-bus";
-				reg = <0x140000 0x20000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x140000 0x20000>;
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon", "simple-bus";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0 0 0x800>;
-
-					phy_gmii_sel: phy-gmii-sel {
-						compatible = "ti,dm814-phy-gmii-sel";
-						reg = <0x650 0x4>;
-						#phy-cells = <1>;
-					};
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-
-					scm_clockdomains: clockdomains {
-					};
-				};
-
-				usb_ctrl_mod: control@620 {
-					compatible = "ti,am335x-usb-ctrl-module";
-					reg = <0x620 0x10
-						0x648 0x4>;
-					reg-names = "phy_ctrl", "wakeup";
-				};
-
-				edma_xbar: dma-router@f90 {
-					compatible = "ti,am335x-edma-crossbar";
-					reg = <0xf90 0x40>;
-					#dma-cells = <3>;
-					dma-requests = <32>;
-					dma-masters = <&edma>;
-				};
-
-				/*
-				 * Note that silicon revision 2.1 and older
-				 * require input enabled (bit 18 set) for all
-				 * 3.3V I/Os to avoid cumulative hardware damage.
-				 * For more info, see errata advisory 2.1.87.
-				 * We leave bit 18 out of function-mask and rely
-				 * on the bootloader for it.
-				 */
-				pincntl: pinmux@800 {
-					compatible = "pinctrl-single";
-					reg = <0x800 0x438>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#pinctrl-cells = <1>;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x307ff>;
-				};
-
-				usb1_phy: usb-phy@1b00 {
-					compatible = "ti,am335x-usb-phy";
-					reg = <0x1b00 0x100>;
-					reg-names = "phy";
-					ti,ctrl_mod = <&usb_ctrl_mod>;
-					#phy-cells = <0>;
-				};
-			};
-
-			prcm: prcm@180000 {
-				compatible = "ti,dm814-prcm", "simple-bus";
-				reg = <0x180000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x180000 0x2000>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-
-			/* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
-			pllss: pllss@1c5000 {
-				compatible = "ti,dm814-pllss", "simple-bus";
-				reg = <0x1c5000 0x1000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x1c5000 0x1000>;
-
-				pllss_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				pllss_clockdomains: clockdomains {
-				};
-			};
-
-			wdt1: wdt@1c7000 {
-				compatible = "ti,omap3-wdt";
-				ti,hwmods = "wd_timer";
-				reg = <0x1c7000 0x1000>;
-				interrupts = <91>;
-			};
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,dm814-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		/* Board must configure evtmux with edma_xbar for EDMA */
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc3";
-			interrupts = <29>;
-			interrupt-parent = <&intc>;
-			reg = <0x47810000 0x1000>;
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg =	<0x49000000 0x10000>;
-			reg-names = "edma3_cc";
-			interrupts = <12 13 14>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
-				   <&edma_tptc2 3>, <&edma_tptc3 0>;
-
-			ti,edma-memcpy-channels = <20 21>;
-		};
-
-		edma_tptc0: tptc@49800000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x49800000 0x100000>;
-			interrupts = <112>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc1: tptc@49900000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x49900000 0x100000>;
-			interrupts = <113>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc2: tptc@49a00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc2";
-			reg =	<0x49a00000 0x100000>;
-			interrupts = <114>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc3: tptc@49b00000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc3";
-			reg =	<0x49b00000 0x100000>;
-			interrupts = <115>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		/* See TRM "Table 1-318. L4HS Instance Summary" */
-		l4hs: l4hs@4a000000 {
-			compatible = "ti,dm814-l4hs", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a000000 0x1b4040>;
-		};
-
-		/* REVISIT: Move to live under l4hs once driver is fixed */
-		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			reg = <0x4a100000 0x800
-			       0x4a100900 0x100>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&intc>;
-			/*
-			 * c0_rx_thresh_pend
-			 * c0_rx_pend
-			 * c0_tx_pend
-			 * c0_misc_pend
-			 */
-			interrupts = <40 41 42 43>;
-			ranges;
-			syscon = <&scm_conf>;
-
-			davinci_mdio: mdio@4a100800 {
-				compatible = "ti,davinci_mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				reg = <0x4a100800 0x100>;
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-				phys = <&phy_gmii_sel 1>;
-
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-				phys = <&phy_gmii_sel 2>;
-			};
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			reg = <0x50000000 0x2000>;
-			interrupts = <100>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-};
-
-#include "dm814x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
deleted file mode 100644
index 1edc2b48b254..000000000000
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ /dev/null
@@ -1,532 +0,0 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/omap.h>
-
-/ {
-	compatible = "ti,dm816";
-	interrupt-parent = <&intc>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		ethernet0 = &eth0;
-		ethernet1 = &eth1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-			device_type = "cpu";
-			reg = <0>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the dm816x interconnect.
-	 * The real dm816x interconnect network is quite complex. Since
-	 * it will not bring real advantage to represent that in DT
-	 * for the moment, just use a fake OCP bus entry to represent
-	 * the whole bus hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		reg = <0x44000000 0x10000>;
-		interrupts = <9 10>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		prcm: prcm@48180000 {
-			compatible = "ti,dm816-prcm", "simple-bus";
-			reg = <0x48180000 0x4000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x48180000 0x4000>;
-
-			prcm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			prcm_clockdomains: clockdomains {
-			};
-		};
-
-		scrm: scrm@48140000 {
-			compatible = "ti,dm816-scrm", "simple-bus";
-			reg = <0x48140000 0x21000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#pinctrl-cells = <1>;
-			ranges = <0 0x48140000 0x21000>;
-
-			dm816x_pinmux: pinmux@800 {
-				compatible = "pinctrl-single";
-				reg = <0x800 0x50a>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#pinctrl-cells = <1>;
-				pinctrl-single,register-width = <16>;
-				pinctrl-single,function-mask = <0xf>;
-			};
-
-			/* Device Configuration Registers */
-			scm_conf: syscon@600 {
-				compatible = "syscon", "simple-bus";
-				reg = <0x600 0x110>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x600 0x110>;
-
-				usb_phy0: usb-phy@20 {
-					compatible = "ti,dm8168-usb-phy";
-					reg = <0x20 0x8>;
-					reg-names = "phy";
-					clocks = <&main_fapll 6>;
-					clock-names = "refclk";
-					#phy-cells = <0>;
-					syscon = <&scm_conf>;
-				};
-
-				usb_phy1: usb-phy@28 {
-					compatible = "ti,dm8168-usb-phy";
-					reg = <0x28 0x8>;
-					reg-names = "phy";
-					clocks = <&main_fapll 6>;
-					clock-names = "refclk";
-					#phy-cells = <0>;
-					syscon = <&scm_conf>;
-				};
-			};
-
-			scrm_clocks: clocks {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			scrm_clockdomains: clockdomains {
-			};
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
-			reg =   <0x49000000 0x10000>,
-			        <0x44e10f90 0x40>;
-			interrupts = <12 13 14>;
-			#dma-cells = <1>;
-		};
-
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			ti,hwmods = "elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <4>;
-		};
-
-		gpio1: gpio@48032000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio1";
-			ti,gpio-always-on;
-			reg = <0x48032000 0x1000>;
-			interrupts = <96>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@4804c000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio2";
-			ti,gpio-always-on;
-			reg = <0x4804c000 0x1000>;
-			interrupts = <98>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			reg = <0x50000000 0x2000>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupts = <100>;
-			dmas = <&edma 52>;
-			dma-names = "rxtx";
-			gpmc,num-cs = <6>;
-			gpmc,num-waitpins = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		i2c1: i2c@48028000 {
-			compatible = "ti,omap4-i2c";
-			ti,hwmods = "i2c1";
-			reg = <0x48028000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <70>;
-			dmas = <&edma 58 &edma 59>;
-			dma-names = "tx", "rx";
-		};
-
-		i2c2: i2c@4802a000 {
-			compatible = "ti,omap4-i2c";
-			ti,hwmods = "i2c2";
-			reg = <0x4802a000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <71>;
-			dmas = <&edma 60 &edma 61>;
-			dma-names = "tx", "rx";
-		};
-
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,dm816-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
-		};
-
-		rtc: rtc@480c0000 {
-			compatible = "ti,am3352-rtc", "ti,da830-rtc";
-			reg = <0x480c0000 0x1000>;
-			interrupts = <75 76>;
-			ti,hwmods = "rtc";
-		};
-
-		mailbox: mailbox@480c8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480c8000 0x2000>;
-			interrupts = <77>;
-			ti,hwmods = "mailbox";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox_dsp {
-				ti,mbox-tx = <3 0 0>;
-				ti,mbox-rx = <0 0 0>;
-			};
-		};
-
-		spinbox: spinbox@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x2000>;
-			ti,hwmods = "spinbox";
-			#hwlock-cells = <1>;
-		};
-
-		mdio: mdio@4a100800 {
-			compatible = "ti,davinci_mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x4a100800 0x100>;
-			ti,hwmods = "davinci_mdio";
-			bus_freq = <1000000>;
-			phy0: ethernet-phy@0 {
-				reg = <1>;
-			};
-			phy1: ethernet-phy@1 {
-				reg = <2>;
-			};
-		};
-
-		eth0: ethernet@4a100000 {
-			compatible = "ti,dm816-emac";
-			ti,hwmods = "emac0";
-			reg = <0x4a100000 0x800
-			       0x4a100900 0x3700>;
-			clocks = <&sysclk24_ck>;
-			syscon = <&scm_conf>;
-			ti,davinci-ctrl-reg-offset = <0>;
-			ti,davinci-ctrl-mod-reg-offset = <0x900>;
-			ti,davinci-ctrl-ram-offset = <0x2000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			interrupts = <40 41 42 43>;
-			phy-handle = <&phy0>;
-		};
-
-		eth1: ethernet@4a120000 {
-			compatible = "ti,dm816-emac";
-			ti,hwmods = "emac1";
-			reg = <0x4a120000 0x4000>;
-			clocks = <&sysclk24_ck>;
-			syscon = <&scm_conf>;
-			ti,davinci-ctrl-reg-offset = <0>;
-			ti,davinci-ctrl-mod-reg-offset = <0x900>;
-			ti,davinci-ctrl-ram-offset = <0x2000>;
-			ti,davinci-ctrl-ram-size = <0x2000>;
-			interrupts = <44 45 46 47>;
-			phy-handle = <&phy1>;
-		};
-
-		sata: sata@4a140000 {
-			compatible = "ti,dm816-ahci";
-			reg = <0x4a140000 0x10000>;
-			interrupts = <16>;
-			ti,hwmods = "sata";
-		};
-
-		mcspi1: spi@48030000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48030000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <65>;
-			ti,spi-num-cs = <4>;
-			ti,hwmods = "mcspi1";
-			dmas = <&edma 16 &edma 17
-				&edma 18 &edma 19
-				&edma 20 &edma 21
-				&edma 22 &edma 23>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x48060000 0x11000>;
-			ti,hwmods = "mmc1";
-			interrupts = <64>;
-			dmas = <&edma 24 &edma 25>;
-			dma-names = "tx", "rx";
-		};
-
-		timer1: timer@4802e000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x4802e000 0x2000>;
-			interrupts = <67>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-			clocks = <&timer1_fck>;
-			clock-names = "fck";
-		};
-
-		timer2: timer@48040000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48040000 0x2000>;
-			interrupts = <68>;
-			ti,hwmods = "timer2";
-			clocks = <&timer2_fck>;
-			clock-names = "fck";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48042000 0x2000>;
-			interrupts = <69>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48044000 0x2000>;
-			interrupts = <92>;
-			ti,hwmods = "timer4";
-			ti,timer-pwm;
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48046000 0x2000>;
-			interrupts = <93>;
-			ti,hwmods = "timer5";
-			ti,timer-pwm;
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48048000 0x2000>;
-			interrupts = <94>;
-			ti,hwmods = "timer6";
-			ti,timer-pwm;
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x4804a000 0x2000>;
-			interrupts = <95>;
-			ti,hwmods = "timer7";
-			ti,timer-pwm;
-		};
-
-		uart1: uart@48020000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart1";
-			reg = <0x48020000 0x2000>;
-			clock-frequency = <48000000>;
-			interrupts = <72>;
-			dmas = <&edma 26 &edma 27>;
-			dma-names = "tx", "rx";
-		};
-
-		uart2: uart@48022000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart2";
-			reg = <0x48022000 0x2000>;
-			clock-frequency = <48000000>;
-			interrupts = <73>;
-			dmas = <&edma 28 &edma 29>;
-			dma-names = "tx", "rx";
-		};
-
-		uart3: uart@48024000 {
-			compatible = "ti,am3352-uart", "ti,omap3-uart";
-			ti,hwmods = "uart3";
-			reg = <0x48024000 0x2000>;
-			clock-frequency = <48000000>;
-			interrupts = <74>;
-			dmas = <&edma 30 &edma 31>;
-			dma-names = "tx", "rx";
-		};
-
-		/* NOTE: USB needs a transceiver driver for phys to work */
-		usb: usb_otg_hs@47401000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47401000 0x400000>;
-			ranges;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-
-			usb0: usb@47401000 {
-				compatible = "ti,musb-dm816";
-				reg = <0x47401400 0x400
-				       0x47401000 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <18>;
-				interrupt-names = "mc";
-				dr_mode = "host";
-				interface-type = <0>;
-				phys = <&usb_phy0>;
-				phy-names = "usb2-phy";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-
-				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
-					&cppi41dma  2 0 &cppi41dma  3 0
-					&cppi41dma  4 0 &cppi41dma  5 0
-					&cppi41dma  6 0 &cppi41dma  7 0
-					&cppi41dma  8 0 &cppi41dma  9 0
-					&cppi41dma 10 0 &cppi41dma 11 0
-					&cppi41dma 12 0 &cppi41dma 13 0
-					&cppi41dma 14 0 &cppi41dma  0 1
-					&cppi41dma  1 1 &cppi41dma  2 1
-					&cppi41dma  3 1 &cppi41dma  4 1
-					&cppi41dma  5 1 &cppi41dma  6 1
-					&cppi41dma  7 1 &cppi41dma  8 1
-					&cppi41dma  9 1 &cppi41dma 10 1
-					&cppi41dma 11 1 &cppi41dma 12 1
-					&cppi41dma 13 1 &cppi41dma 14 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			usb1: usb@47401800 {
-				compatible = "ti,musb-dm816";
-				reg = <0x47401c00 0x400
-				       0x47401800 0x200>;
-				reg-names = "mc", "control";
-				interrupts = <19>;
-				interrupt-names = "mc";
-				dr_mode = "host";
-				interface-type = <0>;
-				phys = <&usb_phy1>;
-				phy-names = "usb2-phy";
-				mentor,multipoint = <1>;
-				mentor,num-eps = <16>;
-				mentor,ram-bits = <12>;
-				mentor,power = <500>;
-
-				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
-					&cppi41dma 17 0 &cppi41dma 18 0
-					&cppi41dma 19 0 &cppi41dma 20 0
-					&cppi41dma 21 0 &cppi41dma 22 0
-					&cppi41dma 23 0 &cppi41dma 24 0
-					&cppi41dma 25 0 &cppi41dma 26 0
-					&cppi41dma 27 0 &cppi41dma 28 0
-					&cppi41dma 29 0 &cppi41dma 15 1
-					&cppi41dma 16 1 &cppi41dma 17 1
-					&cppi41dma 18 1 &cppi41dma 19 1
-					&cppi41dma 20 1 &cppi41dma 21 1
-					&cppi41dma 22 1 &cppi41dma 23 1
-					&cppi41dma 24 1 &cppi41dma 25 1
-					&cppi41dma 26 1 &cppi41dma 27 1
-					&cppi41dma 28 1 &cppi41dma 29 1>;
-				dma-names =
-					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
-					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
-					"rx14", "rx15",
-					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
-					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
-					"tx14", "tx15";
-			};
-
-			cppi41dma: dma-controller@47402000 {
-				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
-				reg-names = "glue", "controller", "scheduler", "queuemgr";
-				interrupts = <17>;
-				interrupt-names = "glue";
-				#dma-cells = <2>;
-				#dma-channels = <30>;
-				#dma-requests = <256>;
-			};
-		};
-
-		wd_timer2: wd_timer@480c2000 {
-			compatible = "ti,omap3-wdt";
-			ti,hwmods = "wd_timer";
-			reg = <0x480c2000 0x1000>;
-			interrupts = <0>;
-		};
-	};
-};
-
-#include "dm816x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
deleted file mode 100644
index 826026c28f90..000000000000
--- a/arch/arm/boot/dts/dove-d3plug.dts
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Globalscale D3Plug";
-	compatible = "globalscale,d3plug", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
-		pinctrl-names = "default";
-
-		wlan-act {
-			label = "wlan-act";
-			gpios = <&gpio0 0 1>;
-		};
-
-		wlan-ap {
-			label = "wlan-ap";
-			gpios = <&gpio0 1 1>;
-		};
-
-		status {
-			label = "status";
-			gpios = <&gpio0 2 1>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 8 0>;
-			pinctrl-0 = <&pmx_gpio_8>;
-			pinctrl-names = "default";
-		};
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&i2c0 { status = "okay"; };
-
-/* Samsung M8G2F eMMC */
-&sdio0 {
-	status = "okay";
-	non-removable;
-	bus-width = <4>;
-};
-
-/* Marvell SD8787 WLAN/BT */
-&sdio1 {
-	status = "okay";
-	non-removable;
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 2M Flash Macronix MX25L1605D */
-	spi-flash@0 {
-		compatible = "st,m25l1605d";
-		spi-max-frequency = <86000000>;
-		reg = <0>;
-	};
-};
-
-&pcie {
-	status = "okay";
-	/* Fresco Logic USB3.0 xHCI controller */
-	pcie@1 {
-		status = "okay";
-		reset-gpios = <&gpio0 26 1>;
-		reset-delay-us = <20000>;
-		pinctrl-0 = <&pmx_camera_gpio>;
-		pinctrl-names = "default";
-	};
-	/* Mini-PCIe slot */
-	pcie@2 {
-		status = "okay";
-		reset-gpios = <&gpio0 25 1>;
-	};
-};
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
deleted file mode 100644
index d3cbb4ea35a8..000000000000
--- a/arch/arm/boot/dts/dra62x.dtsi
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include "dm814x.dtsi"
-
-/ {
-	compatible = "ti,dra62x";
-};
-
-/* Compared to dm814x, dra62x has different offsets for Ethernet */
-&mac {
-	reg = <0x4a100000 0x800
-		0x4a101200 0x100>;
-};
-
-&davinci_mdio {
-	reg = <0x4a101000 0x100>;
-};
-
-#include "dra62x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
deleted file mode 100644
index 1c39a8459b39..000000000000
--- a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Device Tree Source for DRA7x SoC DSPEVE thermal
- *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-dspeve_thermal: dspeve_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <500>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     3>;
-
-	trips {
-		dspeve_crit: dspeve_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
deleted file mode 100644
index dd74a5337d1f..000000000000
--- a/arch/arm/boot/dts/dra7-iva-thermal.dtsi
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Device Tree Source for DRA7x SoC IVA thermal
- *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-iva_thermal: iva_thermal {
-	polling-delay-passive = <250>; /* milliseconds */
-	polling-delay = <500>; /* milliseconds */
-
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     4>;
-
-	trips {
-		iva_crit: iva_crit {
-			temperature = <125000>; /* milliCelsius */
-			hysteresis = <2000>; /* milliCelsius */
-			type = "critical";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
deleted file mode 100644
index 953f0ffce2a9..000000000000
--- a/arch/arm/boot/dts/dra7.dtsi
+++ /dev/null
@@ -1,765 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on "omap4.dtsi"
- */
-
-#include <dt-bindings/bus/ti-sysc.h>
-#include <dt-bindings/clock/dra7.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/dra.h>
-#include <dt-bindings/clock/dra7.h>
-
-#define MAX_SOURCES 400
-
-/ {
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	compatible = "ti,dra7xx";
-	interrupt-parent = <&crossbar_mpu>;
-	chosen { };
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		i2c4 = &i2c5;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-		serial7 = &uart8;
-		serial8 = &uart9;
-		serial9 = &uart10;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
-		d_can0 = &dcan1;
-		d_can1 = &dcan2;
-		spi0 = &qspi;
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-		interrupt-parent = <&gic>;
-	};
-
-	gic: interrupt-controller@48211000 {
-		compatible = "arm,cortex-a15-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x0 0x48211000 0x0 0x1000>,
-		      <0x0 0x48212000 0x0 0x2000>,
-		      <0x0 0x48214000 0x0 0x2000>,
-		      <0x0 0x48216000 0x0 0x2000>;
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-		interrupt-parent = <&gic>;
-	};
-
-	wakeupgen: interrupt-controller@48281000 {
-		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x0 0x48281000 0x0 0x1000>;
-		interrupt-parent = <&gic>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			#cooling-cells = <2>; /* min followed by max */
-
-			vbb-supply = <&abb_mpu>;
-		};
-	};
-
-	cpu0_opp_table: opp-table {
-		compatible = "operating-points-v2-ti-cpu";
-		syscon = <&scm_wkup>;
-
-		opp_nom-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1060000 850000 1150000>,
-					<1060000 850000 1150000>;
-			opp-supported-hw = <0xFF 0x01>;
-			opp-suspend;
-		};
-
-		opp_od-1176000000 {
-			opp-hz = /bits/ 64 <1176000000>;
-			opp-microvolt = <1160000 885000 1160000>,
-					<1160000 885000 1160000>;
-
-			opp-supported-hw = <0xFF 0x02>;
-		};
-
-		opp_high@1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1210000 950000 1250000>,
-					<1210000 950000 1250000>;
-			opp-supported-hw = <0xFF 0x04>;
-		};
-	};
-
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap5-mpu";
-			ti,hwmods = "mpu";
-		};
-	};
-
-	/*
-	 * XXX: Use a flat representation of the SOC interconnect.
-	 * The real OMAP interconnect network is quite complex.
-	 * Since it will not bring real advantage to represent that in DT for
-	 * the moment, just use a fake OCP bus entry to represent the whole bus
-	 * hierarchy.
-	 */
-	ocp {
-		compatible = "ti,dra7-l3-noc", "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x0 0xc0000000>;
-		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x0 0x44000000 0x0 0x1000000>,
-		      <0x0 0x45000000 0x0 0x1000>;
-		interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		l4_cfg: interconnect@4a000000 {
-		};
-		l4_wkup: interconnect@4ae00000 {
-		};
-		l4_per1: interconnect@48000000 {
-		};
-		l4_per2: interconnect@48400000 {
-		};
-		l4_per3: interconnect@48800000 {
-		};
-
-		axi@0 {
-			compatible = "simple-bus";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x51000000 0x51000000 0x3000
-				  0x0	     0x20000000 0x10000000>;
-			/**
-			 * To enable PCI endpoint mode, disable the pcie1_rc
-			 * node and enable pcie1_ep mode.
-			 */
-			pcie1_rc: pcie@51000000 {
-				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
-				reg-names = "rc_dbics", "ti_conf", "config";
-				interrupts = <0 232 0x4>, <0 233 0x4>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
-				bus-range = <0x00 0xff>;
-				#interrupt-cells = <1>;
-				num-lanes = <1>;
-				linux,pci-domain = <0>;
-				ti,hwmods = "pcie1";
-				phys = <&pcie1_phy>;
-				phy-names = "pcie-phy0";
-				ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie1_intc 1>,
-						<0 0 0 2 &pcie1_intc 2>,
-						<0 0 0 3 &pcie1_intc 3>,
-						<0 0 0 4 &pcie1_intc 4>;
-				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
-				status = "disabled";
-				pcie1_intc: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
-			};
-
-			pcie1_ep: pcie_ep@51000000 {
-				reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
-				reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
-				interrupts = <0 232 0x4>;
-				num-lanes = <1>;
-				num-ib-windows = <4>;
-				num-ob-windows = <16>;
-				ti,hwmods = "pcie1";
-				phys = <&pcie1_phy>;
-				phy-names = "pcie-phy0";
-				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
-				ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
-				status = "disabled";
-			};
-		};
-
-		axi@1 {
-			compatible = "simple-bus";
-			#size-cells = <1>;
-			#address-cells = <1>;
-			ranges = <0x51800000 0x51800000 0x3000
-				  0x0	     0x30000000 0x10000000>;
-			status = "disabled";
-			pcie2_rc: pcie@51800000 {
-				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
-				reg-names = "rc_dbics", "ti_conf", "config";
-				interrupts = <0 355 0x4>, <0 356 0x4>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
-				bus-range = <0x00 0xff>;
-				#interrupt-cells = <1>;
-				num-lanes = <1>;
-				linux,pci-domain = <1>;
-				ti,hwmods = "pcie2";
-				phys = <&pcie2_phy>;
-				phy-names = "pcie-phy0";
-				interrupt-map-mask = <0 0 0 7>;
-				interrupt-map = <0 0 0 1 &pcie2_intc 1>,
-						<0 0 0 2 &pcie2_intc 2>,
-						<0 0 0 3 &pcie2_intc 3>,
-						<0 0 0 4 &pcie2_intc 4>;
-				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
-				pcie2_intc: interrupt-controller {
-					interrupt-controller;
-					#address-cells = <0>;
-					#interrupt-cells = <1>;
-				};
-			};
-		};
-
-		ocmcram1: ocmcram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x80000>;
-			ranges = <0x0 0x40300000 0x80000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			/*
-			 * This is a placeholder for an optional reserved
-			 * region for use by secure software. The size
-			 * of this region is not known until runtime so it
-			 * is set as zero to either be updated to reserve
-			 * space or left unchanged to leave all SRAM for use.
-			 * On HS parts that that require the reserved region
-			 * either the bootloader can update the size to
-			 * the required amount or the node can be overridden
-			 * from the board dts file for the secure platform.
-			 */
-			sram-hs@0 {
-				compatible = "ti,secure-ram";
-				reg = <0x0 0x0>;
-			};
-		};
-
-		/*
-		 * NOTE: ocmcram2 and ocmcram3 are not available on all
-		 * DRA7xx and AM57xx variants. Confirm availability in
-		 * the data manual for the exact part number in use
-		 * before enabling these nodes in the board dts file.
-		 */
-		ocmcram2: ocmcram@40400000 {
-			status = "disabled";
-			compatible = "mmio-sram";
-			reg = <0x40400000 0x100000>;
-			ranges = <0x0 0x40400000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-
-		ocmcram3: ocmcram@40500000 {
-			status = "disabled";
-			compatible = "mmio-sram";
-			reg = <0x40500000 0x100000>;
-			ranges = <0x0 0x40500000 0x100000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-		};
-
-		bandgap: bandgap@4a0021e0 {
-			reg = <0x4a0021e0 0xc
-				0x4a00232c 0xc
-				0x4a002380 0x2c
-				0x4a0023C0 0x3c
-				0x4a002564 0x8
-				0x4a002574 0x50>;
-				compatible = "ti,dra752-bandgap";
-				interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-				#thermal-sensor-cells = <1>;
-		};
-
-		dsp1_system: dsp_system@40d00000 {
-			compatible = "syscon";
-			reg = <0x40d00000 0x100>;
-		};
-
-		dra7_iodelay_core: padconf@4844a000 {
-			compatible = "ti,dra7-iodelay";
-			reg = <0x4844a000 0x0d1c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pinctrl-cells = <2>;
-		};
-
-		edma: edma@43300000 {
-			compatible = "ti,edma3-tpcc";
-			ti,hwmods = "tpcc";
-			reg = <0x43300000 0x100000>;
-			reg-names = "edma3_cc";
-			interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_ccint", "edma3_mperr",
-					  "edma3_ccerrint";
-			dma-requests = <64>;
-			#dma-cells = <2>;
-
-			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
-
-			/*
-			 * memcpy is disabled, can be enabled with:
-			 * ti,edma-memcpy-channels = <20 21>;
-			 * for example. Note that these channels need to be
-			 * masked in the xbar as well.
-			 */
-		};
-
-		edma_tptc0: tptc@43400000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc0";
-			reg =	<0x43400000 0x100000>;
-			interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		edma_tptc1: tptc@43500000 {
-			compatible = "ti,edma3-tptc";
-			ti,hwmods = "tptc1";
-			reg =	<0x43500000 0x100000>;
-			interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "edma3_tcerrint";
-		};
-
-		dmm@4e000000 {
-			compatible = "ti,omap5-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "dmm";
-		};
-
-		mmu0_dsp1: mmu@40d01000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x40d01000 0x100>;
-			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu0_dsp1";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp1_system 0x0>;
-			status = "disabled";
-		};
-
-		mmu1_dsp1: mmu@40d02000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x40d02000 0x100>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu1_dsp1";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp1_system 0x1>;
-			status = "disabled";
-		};
-
-		mmu_ipu1: mmu@58882000 {
-			compatible = "ti,dra7-iommu";
-			reg = <0x58882000 0x100>;
-			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu1";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
-			status = "disabled";
-		};
-
-		mmu_ipu2: mmu@55082000 {
-			compatible = "ti,dra7-iommu";
-			reg = <0x55082000 0x100>;
-			interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu_ipu2";
-			#iommu-cells = <0>;
-			ti,iommu-bus-err-back;
-			status = "disabled";
-		};
-
-		abb_mpu: regulator-abb-mpu {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_mpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
-			      <0x4ae06014 0x4>, <0x4a003b20 0xc>,
-			      <0x4ae0c158 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x80>;
-			/* LDOVBBMPU_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBMPU_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1060000		0	0x0	0 0x02000000 0x01F00000
-			1160000		0	0x4	0 0x02000000 0x01F00000
-			1210000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_ivahd: regulator-abb-ivahd {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_ivahd";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
-			      <0x4a002470 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x40000000>;
-			/* LDOVBBIVA_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBIVA_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1055000		0	0x0	0 0x02000000 0x01F00000
-			1150000		0	0x4	0 0x02000000 0x01F00000
-			1250000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_dspeve: regulator-abb-dspeve {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_dspeve";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
-			      <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
-			      <0x4a00246c 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x20000000>;
-			/* LDOVBBDSPEVE_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBDSPEVE_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1055000		0	0x0	0 0x02000000 0x01F00000
-			1150000		0	0x4	0 0x02000000 0x01F00000
-			1250000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		abb_gpu: regulator-abb-gpu {
-			compatible = "ti,abb-v3";
-			regulator-name = "abb_gpu";
-			#address-cells = <0>;
-			#size-cells = <0>;
-			clocks = <&sys_clkin1>;
-			ti,settling-time = <50>;
-			ti,clock-cycles = <16>;
-
-			reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
-			      <0x4ae06010 0x4>, <0x4a003b08 0xc>,
-			      <0x4ae0c154 0x4>;
-			reg-names = "setup-address", "control-address",
-				    "int-address", "efuse-address",
-				    "ldo-address";
-			ti,tranxdone-status-mask = <0x10000000>;
-			/* LDOVBBGPU_FBB_MUX_CTRL */
-			ti,ldovbb-override-mask = <0x400>;
-			/* LDOVBBGPU_FBB_VSET_OUT */
-			ti,ldovbb-vset-mask = <0x1F>;
-
-			/*
-			 * NOTE: only FBB mode used but actual vset will
-			 * determine final biasing
-			 */
-			ti,abb_info = <
-			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
-			1090000		0	0x0	0 0x02000000 0x01F00000
-			1210000		0	0x4	0 0x02000000 0x01F00000
-			1280000		0	0x8	0 0x02000000 0x01F00000
-			>;
-		};
-
-		qspi: spi@4b300000 {
-			compatible = "ti,dra7xxx-qspi";
-			reg = <0x4b300000 0x100>,
-			      <0x5c000000 0x4000000>;
-			reg-names = "qspi_base", "qspi_mmap";
-			syscon-chipselects = <&scm_conf 0x558>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
-			clock-names = "fck";
-			num-cs = <4>;
-			interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		/* OCP2SCP3 */
-		sata: sata@4a141100 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
-			ti,hwmods = "sata";
-			ports-implemented = <0x1>;
-		};
-
-		/* OCP2SCP1 */
-		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			reg = <0x50000000 0x37c>;      /* device IO registers */
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 4 0>;
-			dma-names = "rxtx";
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			status = "disabled";
-		};
-
-		crossbar_mpu: crossbar@4a002a48 {
-			compatible = "ti,irq-crossbar";
-			reg = <0x4a002a48 0x130>;
-			interrupt-controller;
-			interrupt-parent = <&wakeupgen>;
-			#interrupt-cells = <3>;
-			ti,max-irqs = <160>;
-			ti,max-crossbar-sources = <MAX_SOURCES>;
-			ti,reg-size = <2>;
-			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
-			ti,irqs-skip = <10 133 139 140>;
-			ti,irqs-safe-map = <0>;
-		};
-
-		dss: dss@58000000 {
-			compatible = "ti,dra7-dss";
-			/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
-			/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			/* CTRL_CORE_DSS_PLL_CONTROL */
-			syscon-pll-ctrl = <&scm_conf 0x538>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			dispc@58001000 {
-				compatible = "ti,dra7-dispc";
-				reg = <0x58001000 0x1000>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
-				clock-names = "fck";
-				/* CTRL_CORE_SMA_SW_1 */
-				syscon-pol = <&scm_conf 0x534>;
-			};
-
-			hdmi: encoder@58060000 {
-				compatible = "ti,dra7-hdmi";
-				reg = <0x58040000 0x200>,
-				      <0x58040200 0x80>,
-				      <0x58040300 0x80>,
-				      <0x58060000 0x19000>;
-				reg-names = "wp", "pll", "phy", "core";
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
-					 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
-				clock-names = "fck", "sys_clk";
-				dmas = <&sdma_xbar 76>;
-				dma-names = "audio_tx";
-			};
-		};
-
-		aes1: aes@4b500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes1";
-			reg = <0x4b500000 0xa0>;
-			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		aes2: aes@4b700000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes2";
-			reg = <0x4b700000 0xa0>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		des: des@480a5000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x480a5000 0xa0>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
-			dma-names = "tx", "rx";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x4b101000 0x300>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma_xbar 119 0>;
-			dma-names = "rx";
-			clocks = <&l3_iclk_div>;
-			clock-names = "fck";
-		};
-
-		opp_supply_mpu: opp-supply@4a003b20 {
-			compatible = "ti,omap5-opp-supply";
-			reg = <0x4a003b20 0xc>;
-			ti,efuse-settings = <
-			/* uV   offset */
-			1060000 0x0
-			1160000 0x4
-			1210000 0x8
-			>;
-			ti,absolute-max-voltage-uv = <1500000>;
-		};
-
-	};
-
-	thermal_zones: thermal-zones {
-		#include "omap4-cpu-thermal.dtsi"
-		#include "omap5-gpu-thermal.dtsi"
-		#include "omap5-core-thermal.dtsi"
-		#include "dra7-dspeve-thermal.dtsi"
-		#include "dra7-iva-thermal.dtsi"
-	};
-
-};
-
-&cpu_thermal {
-	polling-delay = <500>; /* milliseconds */
-	coefficients = <0 2000>;
-};
-
-&gpu_thermal {
-	coefficients = <0 2000>;
-};
-
-&core_thermal {
-	coefficients = <0 2000>;
-};
-
-&dspeve_thermal {
-	coefficients = <0 2000>;
-};
-
-&iva_thermal {
-	coefficients = <0 2000>;
-};
-
-&cpu_crit {
-	temperature = <120000>; /* milli Celsius */
-};
-
-&core_crit {
-	temperature = <120000>; /* milli Celsius */
-};
-
-&gpu_crit {
-	temperature = <120000>; /* milli Celsius */
-};
-
-&dspeve_crit {
-	temperature = <120000>; /* milli Celsius */
-};
-
-&iva_crit {
-	temperature = <120000>; /* milli Celsius */
-};
-
-#include "dra7-l4.dtsi"
-#include "dra7xx-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi
deleted file mode 100644
index 695a08ed0360..000000000000
--- a/arch/arm/boot/dts/dra71x.dtsi
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "dra72-evm-common.dtsi"
-
-&rtctarget {
-	status = "disabled";
-};
-
-&usb4_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
deleted file mode 100644
index 2bb2e8be6276..000000000000
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
- */
-#include "dra72-evm-common.dtsi"
-#include "dra72x-mmc-iodelay.dtsi"
-#include <dt-bindings/net/ti-dp83867.h>
-
-/ {
-	model = "TI DRA722 Rev C EVM";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
-	};
-
-	evm_1v8_sw: fixedregulator-evm_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&smps4_reg>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&i2c1 {
-	tps65917: tps65917@58 {
-		reg = <0x58>;
-
-		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
-	};
-};
-
-#include "dra72-evm-tps65917.dtsi"
-
-&ldo2_reg {
-	/* LDO2_OUT --> VDDA_1V8_PHY2 */
-	regulator-always-on;
-	regulator-boot-on;
-};
-
-&hdmi {
-	vdda-supply = <&ldo2_reg>;
-};
-
-&pcf_gpio_21 {
-	interrupt-parent = <&gpio3>;
-	interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&mac {
-	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
-		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
-		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
-	dual_emac;
-};
-
-&cpsw_emac0 {
-	phy-handle = <&dp83867_0>;
-	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy-handle = <&dp83867_1>;
-	phy-mode = "rgmii-id";
-	dual_emac_res_vlan = <2>;
-};
-
-&davinci_mdio {
-	dp83867_0: ethernet-phy@2 {
-		reg = <2>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-impedance;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-		ti,dp83867-rxctrl-strap-quirk;
-	};
-
-	dp83867_1: ethernet-phy@3 {
-		reg = <3>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
-		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-impedance;
-		interrupt-parent = <&gpio6>;
-		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
-		ti,dp83867-rxctrl-strap-quirk;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
-	vqmmc-supply = <&ldo1_reg>;
-};
-
-&mmc2 {
-	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_hs>;
-	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
-	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
-	vmmc-supply = <&evm_1v8_sw>;
-};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
deleted file mode 100644
index 9adb77585ef1..000000000000
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
- */
-#include "dra72-evm-common.dtsi"
-#include "dra72x-mmc-iodelay.dtsi"
-/ {
-	model = "TI DRA722";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
-	};
-
-	evm_1v8_sw: fixedregulator-evm_1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&smps4_reg>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&i2c1 {
-	tps65917: tps65917@58 {
-		reg = <0x58>;
-
-		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
-	};
-};
-
-#include "dra72-evm-tps65917.dtsi"
-
-&hdmi {
-	vdda-supply = <&ldo3_reg>;
-};
-
-&pcf_gpio_21 {
-	interrupt-parent = <&gpio6>;
-	interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-};
-
-&mac {
-	slaves = <1>;
-	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
-};
-
-&cpsw_emac0 {
-	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii";
-};
-
-&davinci_mdio {
-	ethphy0: ethernet-phy@3 {
-		reg = <3>;
-	};
-};
-
-&mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
-	pinctrl-0 = <&mmc1_pins_default>;
-	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
-	vqmmc-supply = <&ldo1_reg>;
-};
-
-&mmc2 {
-	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
-	pinctrl-0 = <&mmc2_pins_default>;
-	pinctrl-1 = <&mmc2_pins_hs>;
-	pinctrl-2 = <&mmc2_pins_ddr_rev10>;
-	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
-	vmmc-supply = <&evm_1v8_sw>;
-};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
deleted file mode 100644
index f5762709c853..000000000000
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on "omap4.dtsi"
- */
-
-#include "dra7.dtsi"
-
-/ {
-	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&wakeupgen>;
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&dss {
-	reg = <0x58000000 0x80>,
-	      <0x58004054 0x4>,
-	      <0x58004300 0x20>;
-	reg-names = "dss", "pll1_clkctrl", "pll1";
-
-	clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
-		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>;
-	clock-names = "fck", "video1_clk";
-};
-
-&mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		ti,mbox-tx = <5 2 2>;
-		ti,mbox-rx = <1 2 2>;
-		status = "disabled";
-	};
-};
-
-&mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-};
-
-&pcie1_rc {
-	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
-};
-
-&pcie1_ep {
-	compatible = "ti,dra726-pcie-ep", "ti,dra7-pcie-ep";
-};
-
-&pcie2_rc {
-	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
-};
-
-&usb4_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
deleted file mode 100644
index d1b5b76bc5a8..000000000000
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Based on "omap4.dtsi"
- */
-
-#include "dra7.dtsi"
-
-/ {
-	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
-
-	cpus {
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-			operating-points-v2 = <&cpu0_opp_table>;
-
-			clocks = <&dpll_mpu_ck>;
-			clock-names = "cpu";
-
-			clock-latency = <300000>; /* From omap-cpufreq driver */
-
-			/* cooling options */
-			#cooling-cells = <2>; /* min followed by max */
-
-			vbb-supply = <&abb_mpu>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&wakeupgen>;
-		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	ocp {
-		dsp2_system: dsp_system@41500000 {
-			compatible = "syscon";
-			reg = <0x41500000 0x100>;
-		};
-
-		omap_dwc3_4: omap_dwc3_4@48940000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss4";
-			reg = <0x48940000 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			status = "disabled";
-			usb4: usb@48950000 {
-				compatible = "snps,dwc3";
-				reg = <0x48950000 0x17000>;
-				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "peripheral",
-						  "host",
-						  "otg";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-			};
-		};
-
-		mmu0_dsp2: mmu@41501000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x41501000 0x100>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu0_dsp2";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp2_system 0x0>;
-			status = "disabled";
-		};
-
-		mmu1_dsp2: mmu@41502000 {
-			compatible = "ti,dra7-dsp-iommu";
-			reg = <0x41502000 0x100>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmu1_dsp2";
-			#iommu-cells = <0>;
-			ti,syscon-mmuconfig = <&dsp2_system 0x1>;
-			status = "disabled";
-		};
-	};
-};
-
-&cpu0_opp_table {
-	opp-shared;
-};
-
-&dss {
-	reg = <0x58000000 0x80>,
-	      <0x58004054 0x4>,
-	      <0x58004300 0x20>,
-	      <0x58009054 0x4>,
-	      <0x58009300 0x20>;
-	reg-names = "dss", "pll1_clkctrl", "pll1",
-		    "pll2_clkctrl", "pll2";
-
-	clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
-		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>,
-		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 13>;
-	clock-names = "fck", "video1_clk", "video2_clk";
-};
-
-&mailbox5 {
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		ti,mbox-tx = <5 2 2>;
-		ti,mbox-rx = <1 2 2>;
-		status = "disabled";
-	};
-};
-
-&mailbox6 {
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		ti,mbox-tx = <6 2 2>;
-		ti,mbox-rx = <4 2 2>;
-		status = "disabled";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		ti,mbox-tx = <5 2 2>;
-		ti,mbox-rx = <1 2 2>;
-		status = "disabled";
-	};
-};
-
-&pcie1_rc {
-	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
-};
-
-&pcie1_ep {
-	compatible = "ti,dra746-pcie-ep", "ti,dra7-pcie-ep";
-};
-
-&pcie2_rc {
-	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
-};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
deleted file mode 100644
index cdcba3f561c4..000000000000
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include "dra74x.dtsi"
-
-/ {
-	compatible = "ti,dra762", "ti,dra7";
-
-	ocp {
-		target-module@42c01900 {
-			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
-			ranges = <0x0 0x42c00000 0x2000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x42c01900 0x4>,
-			      <0x42c01904 0x4>,
-			      <0x42c01908 0x4>;
-			reg-names = "rev", "sysc", "syss";
-			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
-					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
-			ti,syss-mask = <1>;
-			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
-			clock-names = "fck";
-
-			m_can0: mcan@1a00 {
-				compatible = "bosch,m_can";
-				reg = <0x1a00 0x4000>, <0x0 0x18FC>;
-				reg-names = "m_can", "message_ram";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "int0", "int1";
-				clocks = <&mcan_clk>, <&l3_iclk_div>;
-				clock-names = "cclk", "hclk";
-				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
-			};
-		};
-	};
-
-};
-
-/* MCAN interrupts are hard-wired to irqs 67, 68 */
-&crossbar_mpu {
-	ti,irqs-skip = <10 67 68 133 139 140>;
-};
-
-&scm_conf_clocks {
-	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		reg = <0x03fc>;
-		ti,bit-shift=<20>;
-		ti,latch-bit=<26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
-		assigned-clock-rates = <80000000>;
-	};
-
-	dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
-		reg = <0x3fc>;
-		ti,bit-shift = <29>;
-		ti,latch-bit=<26>;
-		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
-	};
-
-	mcan_clk: mcan_clk@3fc {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
-		ti,bit-shift = <27>;
-		reg = <0x3fc>;
-	};
-};
-
-&rtctarget {
-	status = "disabled";
-};
-
-&usb4_tm {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
deleted file mode 100644
index 93e1eb83bed9..000000000000
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ /dev/null
@@ -1,1815 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Device Tree Source for DRA7xx clock data
- *
- * Copyright (C) 2013 Texas Instruments, Inc.
- */
-&cm_core_aon_clocks {
-	atl_clkin0_ck: atl_clkin0_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	atl_clkin1_ck: atl_clkin1_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	atl_clkin2_ck: atl_clkin2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	atl_clkin3_ck: atl_clkin3_ck {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
-	};
-
-	hdmi_clkin_ck: hdmi_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	mlb_clkin_ck: mlb_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	mlbp_clkin_ck: mlbp_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-	};
-
-	ref_clkin0_ck: ref_clkin0_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin1_ck: ref_clkin1_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin2_ck: ref_clkin2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	ref_clkin3_ck: ref_clkin3_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	rmii_clk_ck: rmii_clk_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	sdvenc_clkin_ck: sdvenc_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-	};
-
-	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin1>;
-		clock-mult = <1>;
-		clock-div = <610>;
-	};
-
-	virt_12000000_ck: virt_12000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <12000000>;
-	};
-
-	virt_13000000_ck: virt_13000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <13000000>;
-	};
-
-	virt_16800000_ck: virt_16800000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <16800000>;
-	};
-
-	virt_19200000_ck: virt_19200000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <19200000>;
-	};
-
-	virt_20000000_ck: virt_20000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <20000000>;
-	};
-
-	virt_26000000_ck: virt_26000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-	};
-
-	virt_27000000_ck: virt_27000000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <27000000>;
-	};
-
-	virt_38400000_ck: virt_38400000_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <38400000>;
-	};
-
-	sys_clkin2: sys_clkin2 {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <22579200>;
-	};
-
-	usb_otg_clkin_ck: usb_otg_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video1_clkin_ck: video1_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video1_m2_clkin_ck: video1_m2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video2_clkin_ck: video2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	video2_m2_clkin_ck: video2_m2_clkin_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	dpll_abe_ck: dpll_abe_ck@1e0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-m4xen-clock";
-		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
-		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
-	};
-
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_abe_ck>;
-	};
-
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	abe_clk: abe_clk@108 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		ti,max-div = <4>;
-		reg = <0x0108>;
-		ti,index-power-of-two;
-	};
-
-	dpll_abe_m2_ck: dpll_abe_m2_ck@1f0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@1f4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01f4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_byp_mux: dpll_core_byp_mux@12c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x012c>;
-	};
-
-	dpll_core_ck: dpll_core_ck@120 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
-		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
-	};
-
-	dpll_core_x2_ck: dpll_core_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_core_ck>;
-	};
-
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck@13c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x013c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_mpu_ck: dpll_mpu_ck@160 {
-		#clock-cells = <0>;
-		compatible = "ti,omap5-mpu-dpll-clock";
-		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
-		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
-	};
-
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck@170 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_mpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0170>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	mpu_dclk_div: mpu_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_mpu_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_dsp_byp_mux: dpll_dsp_byp_mux@240 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0240>;
-	};
-
-	dpll_dsp_ck: dpll_dsp_ck@234 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
-		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
-		assigned-clocks = <&dpll_dsp_ck>;
-		assigned-clock-rates = <600000000>;
-	};
-
-	dpll_dsp_m2_ck: dpll_dsp_m2_ck@244 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0244>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_dsp_m2_ck>;
-		assigned-clock-rates = <600000000>;
-	};
-
-	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_iva_byp_mux: dpll_iva_byp_mux@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x01ac>;
-	};
-
-	dpll_iva_ck: dpll_iva_ck@1a0 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
-		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
-		assigned-clocks = <&dpll_iva_ck>;
-		assigned-clock-rates = <1165000000>;
-	};
-
-	dpll_iva_m2_ck: dpll_iva_m2_ck@1b0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_iva_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x01b0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_iva_m2_ck>;
-		assigned-clock-rates = <388333334>;
-	};
-
-	iva_dclk: iva_dclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_iva_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_gpu_byp_mux: dpll_gpu_byp_mux@2e4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02e4>;
-	};
-
-	dpll_gpu_ck: dpll_gpu_ck@2d8 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
-		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
-		assigned-clocks = <&dpll_gpu_ck>;
-		assigned-clock-rates = <1277000000>;
-	};
-
-	dpll_gpu_m2_ck: dpll_gpu_m2_ck@2e8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gpu_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02e8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_gpu_m2_ck>;
-		assigned-clock-rates = <425666667>;
-	};
-
-	dpll_core_m2_ck: dpll_core_m2_ck@130 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0130>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_ddr_byp_mux: dpll_ddr_byp_mux@21c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x021c>;
-	};
-
-	dpll_ddr_ck: dpll_ddr_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
-		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
-	};
-
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck@220 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0220>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_byp_mux: dpll_gmac_byp_mux@2b4 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
-		ti,bit-shift = <23>;
-		reg = <0x02b4>;
-	};
-
-	dpll_gmac_ck: dpll_gmac_ck@2a8 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
-		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
-	};
-
-	dpll_gmac_m2_ck: dpll_gmac_m2_ck@2b8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02b8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	video2_dclk_div: video2_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_dclk_div: video1_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_m2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_dclk_div: hdmi_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_abe_m3x2_ck>;
-		clock-mult = <1>;
-		clock-div = <3>;
-	};
-
-	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_core_h12x2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_eve_byp_mux: dpll_eve_byp_mux@290 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x0290>;
-	};
-
-	dpll_eve_ck: dpll_eve_ck@284 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
-		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
-	};
-
-	dpll_eve_m2_ck: dpll_eve_m2_ck@294 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_eve_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0294>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	eve_dclk_div: eve_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_eve_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck@140 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0140>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck@144 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0144>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck@154 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0154>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck@158 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck@15c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_core_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_ddr_ck>;
-	};
-
-	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@228 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0228>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_dsp_ck>;
-	};
-
-	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@248 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0248>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-		assigned-clocks = <&dpll_dsp_m3x2_ck>;
-		assigned-clock-rates = <400000000>;
-	};
-
-	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_gmac_ck>;
-	};
-
-	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@2c0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c0>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@2c4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c4>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@2c8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02c8>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@2bc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x02bc>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	gmii_m_clk_div: gmii_m_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_gmac_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	hdmi_clk2_div: hdmi_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	hdmi_div_clk: hdmi_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&hdmi_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	l3_iclk_div: l3_iclk_div@100 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		ti,max-div = <2>;
-		ti,bit-shift = <4>;
-		reg = <0x0100>;
-		clocks = <&dpll_core_h12x2_ck>;
-		ti,index-power-of-two;
-	};
-
-	l4_root_clk_div: l4_root_clk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&l3_iclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	video1_clk2_div: video1_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video1_div_clk: video1_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video1_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_clk2_div: video2_clk2_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	video2_div_clk: video2_div_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&video2_clkin_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	ipu1_gfclk_mux: ipu1_gfclk_mux@520 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0520>;
-		assigned-clocks = <&ipu1_gfclk_mux>;
-		assigned-clock-parents = <&dpll_core_h22x2_ck>;
-	};
-
-	dummy_ck: dummy_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-};
-&prm_clocks {
-	sys_clkin1: sys_clkin1@110 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
-		reg = <0x0110>;
-		ti,index-starts-at-one;
-	};
-
-	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@118 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0118>;
-	};
-
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@114 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x0114>;
-	};
-
-	abe_dpll_clk_mux: abe_dpll_clk_mux@10c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
-		reg = <0x010c>;
-	};
-
-	abe_24m_fclk: abe_24m_fclk@11c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x011c>;
-		ti,dividers = <8>, <16>;
-	};
-
-	aess_fclk: aess_fclk@178 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&abe_clk>;
-		reg = <0x0178>;
-		ti,max-div = <2>;
-	};
-
-	abe_giclk_div: abe_giclk_div@174 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&aess_fclk>;
-		reg = <0x0174>;
-		ti,max-div = <2>;
-	};
-
-	abe_lp_clk_div: abe_lp_clk_div@1d8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2x2_ck>;
-		reg = <0x01d8>;
-		ti,dividers = <16>, <32>;
-	};
-
-	abe_sys_clk_div: abe_sys_clk_div@120 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		reg = <0x0120>;
-		ti,max-div = <2>;
-	};
-
-	adc_gfclk_mux: adc_gfclk_mux@1dc {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
-		reg = <0x01dc>;
-	};
-
-	sys_clk1_dclk_div: sys_clk1_dclk_div@1c8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c8>;
-		ti,index-power-of-two;
-	};
-
-	sys_clk2_dclk_div: sys_clk2_dclk_div@1cc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin2>;
-		ti,max-div = <64>;
-		reg = <0x01cc>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_dclk_div: per_abe_x1_dclk_div@1bc {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01bc>;
-		ti,index-power-of-two;
-	};
-
-	dsp_gclk_div: dsp_gclk_div@18c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_dsp_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x018c>;
-		ti,index-power-of-two;
-	};
-
-	gpu_dclk: gpu_dclk@1a0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gpu_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01a0>;
-		ti,index-power-of-two;
-	};
-
-	emif_phy_dclk_div: emif_phy_dclk_div@190 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_ddr_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0190>;
-		ti,index-power-of-two;
-	};
-
-	gmac_250m_dclk_div: gmac_250m_dclk_div@19c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x019c>;
-		ti,index-power-of-two;
-	};
-
-	gmac_main_clk: gmac_main_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&gmac_250m_dclk_div>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_480m_dclk_div: l3init_480m_dclk_div@1ac {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01ac>;
-		ti,index-power-of-two;
-	};
-
-	usb_otg_dclk_div: usb_otg_dclk_div@184 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&usb_otg_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0184>;
-		ti,index-power-of-two;
-	};
-
-	sata_dclk_div: sata_dclk_div@1c0 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x01c0>;
-		ti,index-power-of-two;
-	};
-
-	pcie2_dclk_div: pcie2_dclk_div@1b8 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b8>;
-		ti,index-power-of-two;
-	};
-
-	pcie_dclk_div: pcie_dclk_div@1b4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&apll_pcie_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x01b4>;
-		ti,index-power-of-two;
-	};
-
-	emu_dclk_div: emu_dclk_div@194 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		ti,max-div = <64>;
-		reg = <0x0194>;
-		ti,index-power-of-two;
-	};
-
-	secure_32k_dclk_div: secure_32k_dclk_div@1c4 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&secure_32k_clk_src_ck>;
-		ti,max-div = <64>;
-		reg = <0x01c4>;
-		ti,index-power-of-two;
-	};
-
-	clkoutmux0_clk_mux: clkoutmux0_clk_mux@158 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0158>;
-	};
-
-	clkoutmux1_clk_mux: clkoutmux1_clk_mux@15c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x015c>;
-	};
-
-	clkoutmux2_clk_mux: clkoutmux2_clk_mux@160 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
-		reg = <0x0160>;
-	};
-
-	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&sys_clkin1>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	eve_clk: eve_clk@180 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
-		reg = <0x0180>;
-	};
-
-	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@164 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0164>;
-	};
-
-	mlb_clk: mlb_clk@134 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mlb_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0134>;
-		ti,index-power-of-two;
-	};
-
-	mlbp_clk: mlbp_clk@130 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mlbp_clkin_ck>;
-		ti,max-div = <64>;
-		reg = <0x0130>;
-		ti,index-power-of-two;
-	};
-
-	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@138 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_abe_m2_ck>;
-		ti,max-div = <64>;
-		reg = <0x0138>;
-		ti,index-power-of-two;
-	};
-
-	timer_sys_clk_div: timer_sys_clk_div@144 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sys_clkin1>;
-		reg = <0x0144>;
-		ti,max-div = <2>;
-	};
-
-	video1_dpll_clk_mux: video1_dpll_clk_mux@168 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x0168>;
-	};
-
-	video2_dpll_clk_mux: video2_dpll_clk_mux@16c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		reg = <0x016c>;
-	};
-
-	wkupaon_iclk_mux: wkupaon_iclk_mux@108 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
-		reg = <0x0108>;
-	};
-};
-
-&cm_core_clocks {
-	dpll_pcie_ref_ck: dpll_pcie_ref_ck@200 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin1>;
-		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
-	};
-
-	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c 0x4>;
-		ti,bit-shift = <7>;
-	};
-
-	apll_pcie_ck: apll_pcie_ck@21c {
-		#clock-cells = <0>;
-		compatible = "ti,dra7-apll-clock";
-		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
-		reg = <0x021c>, <0x0220>;
-	};
-
-	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
-		compatible = "ti,divider-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x021c>;
-		ti,dividers = <2>, <1>;
-		ti,bit-shift = <8>;
-		ti,max-div = <2>;
-	};
-
-	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	apll_pcie_m2_ck: apll_pcie_m2_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&apll_pcie_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_per_byp_mux: dpll_per_byp_mux@14c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x014c>;
-	};
-
-	dpll_per_ck: dpll_per_ck@140 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
-		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
-	};
-
-	dpll_per_m2_ck: dpll_per_m2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	dpll_usb_byp_mux: dpll_usb_byp_mux@18c {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
-		ti,bit-shift = <23>;
-		reg = <0x018c>;
-	};
-
-	dpll_usb_ck: dpll_usb_ck@180 {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
-		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
-	};
-
-	dpll_usb_m2_ck: dpll_usb_m2_ck@190 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0190>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@210 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_pcie_ref_ck>;
-		ti,max-div = <127>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0210>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_x2_ck: dpll_per_x2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,omap4-dpll-x2-clock";
-		clocks = <&dpll_per_ck>;
-	};
-
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck@158 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0158>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck@15c {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x015c>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h13x2_ck: dpll_per_h13x2_ck@160 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0160>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck@164 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <63>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0164>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck@150 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_per_x2_ck>;
-		ti,max-div = <31>;
-		ti,autoidle-shift = <8>;
-		reg = <0x0150>;
-		ti,index-starts-at-one;
-		ti,invert-autoidle-bit;
-	};
-
-	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_usb_ck>;
-		clock-mult = <1>;
-		clock-div = <1>;
-	};
-
-	func_128m_clk: func_128m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_h11x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	func_12m_fclk: func_12m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <16>;
-	};
-
-	func_24m_clk: func_24m_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_48m_fclk: func_48m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <4>;
-	};
-
-	func_96m_fclk: func_96m_fclk {
-		#clock-cells = <0>;
-		compatible = "fixed-factor-clock";
-		clocks = <&dpll_per_m2x2_ck>;
-		clock-mult = <1>;
-		clock-div = <2>;
-	};
-
-	l3init_60m_fclk: l3init_60m_fclk@104 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_usb_m2_ck>;
-		reg = <0x0104>;
-		ti,dividers = <1>, <8>;
-	};
-
-	clkout2_clk: clkout2_clk@6b0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkoutmux2_clk_mux>;
-		ti,bit-shift = <8>;
-		reg = <0x06b0>;
-	};
-
-	l3init_960m_gfclk: l3init_960m_gfclk@6c0 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x06c0>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@640 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0640>;
-	};
-
-	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@688 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0688>;
-	};
-
-	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@698 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x0698>;
-	};
-
-	gpu_core_gclk_mux: gpu_core_gclk_mux@1220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1220>;
-		assigned-clocks = <&gpu_core_gclk_mux>;
-		assigned-clock-parents = <&dpll_gpu_m2_ck>;
-	};
-
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@1220 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
-		ti,bit-shift = <26>;
-		reg = <0x1220>;
-		assigned-clocks = <&gpu_hyd_gclk_mux>;
-		assigned-clock-parents = <&dpll_gpu_m2_ck>;
-	};
-
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div@e50 {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&wkupaon_iclk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0e50>;
-		ti,dividers = <8>, <16>, <32>;
-	};
-
-	vip1_gclk_mux: vip1_gclk_mux@1020 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1020>;
-	};
-
-	vip2_gclk_mux: vip2_gclk_mux@1028 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1028>;
-	};
-
-	vip3_gclk_mux: vip3_gclk_mux@1030 {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1030>;
-	};
-};
-
-&cm_core_clockdomains {
-	coreaon_clkdm: coreaon_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_usb_ck>;
-	};
-};
-
-&scm_conf_clocks {
-	dss_deshdcp_clk: dss_deshdcp_clk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_iclk_div>;
-		ti,bit-shift = <0>;
-		reg = <0x558>;
-	};
-
-       ehrpwm0_tbclk: ehrpwm0_tbclk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <20>;
-		reg = <0x0558>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <21>;
-		reg = <0x0558>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@558 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4_root_clk_div>;
-		ti,bit-shift = <22>;
-		reg = <0x0558>;
-	};
-
-	sys_32k_ck: sys_32k_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x6c4>;
-	};
-};
-
-&cm_core_aon {
-	mpu_cm: mpu-cm@300 {
-		compatible = "ti,omap4-cm";
-		reg = <0x300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x300 0x100>;
-
-		mpu_clkctrl: mpu-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	dsp1_cm: dsp1-cm@400 {
-		compatible = "ti,omap4-cm";
-		reg = <0x400 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x400 0x100>;
-
-		dsp1_clkctrl: dsp1-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	ipu_cm: ipu-cm@500 {
-		compatible = "ti,omap4-cm";
-		reg = <0x500 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x500 0x100>;
-
-		ipu1_clkctrl: ipu1-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-		ipu_clkctrl: ipu-clkctrl@50 {
-			compatible = "ti,clkctrl";
-			reg = <0x50 0x34>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	dsp2_cm: dsp2-cm@600 {
-		compatible = "ti,omap4-cm";
-		reg = <0x600 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x600 0x100>;
-
-		dsp2_clkctrl: dsp2-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	rtc_cm: rtc-cm@700 {
-		compatible = "ti,omap4-cm";
-		reg = <0x700 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x700 0x100>;
-
-		rtc_clkctrl: rtc-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x28>;
-			#clock-cells = <2>;
-		};
-	};
-
-};
-
-&cm_core {
-	coreaon_cm: coreaon-cm@600 {
-		compatible = "ti,omap4-cm";
-		reg = <0x600 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x600 0x100>;
-
-		coreaon_clkctrl: coreaon-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x1c>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3main1_cm: l3main1-cm@700 {
-		compatible = "ti,omap4-cm";
-		reg = <0x700 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x700 0x100>;
-
-		l3main1_clkctrl: l3main1-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x74>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	ipu2_cm: ipu2-cm@900 {
-		compatible = "ti,omap4-cm";
-		reg = <0x900 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x900 0x100>;
-
-		ipu2_clkctrl: ipu2-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	dma_cm: dma-cm@a00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xa00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xa00 0x100>;
-
-		dma_clkctrl: dma-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	emif_cm: emif-cm@b00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xb00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xb00 0x100>;
-
-		emif_clkctrl: emif-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	atl_cm: atl-cm@c00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xc00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xc00 0x100>;
-
-		atl_clkctrl: atl-clkctrl@0 {
-			compatible = "ti,clkctrl";
-			reg = <0x0 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l4cfg_cm: l4cfg-cm@d00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xd00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xd00 0x100>;
-
-		l4cfg_clkctrl: l4cfg-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x84>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3instr_cm: l3instr-cm@e00 {
-		compatible = "ti,omap4-cm";
-		reg = <0xe00 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0xe00 0x100>;
-
-		l3instr_clkctrl: l3instr-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0xc>;
-			#clock-cells = <2>;
-		};
-	};
-
-	dss_cm: dss-cm@1100 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1100 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1100 0x100>;
-
-		dss_clkctrl: dss-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x14>;
-			#clock-cells = <2>;
-		};
-	};
-
-	l3init_cm: l3init-cm@1300 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1300 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1300 0x100>;
-
-		l3init_clkctrl: l3init-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x6c>, <0xe0 0x14>;
-			#clock-cells = <2>;
-		};
-
-		pcie_clkctrl: pcie-clkctrl@b0 {
-			compatible = "ti,clkctrl";
-			reg = <0xb0 0xc>;
-			#clock-cells = <2>;
-		};
-
-		gmac_clkctrl: gmac-clkctrl@d0 {
-			compatible = "ti,clkctrl";
-			reg = <0xd0 0x4>;
-			#clock-cells = <2>;
-		};
-
-	};
-
-	l4per_cm: l4per-cm@1700 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1700 0x300>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1700 0x300>;
-
-		l4per_clkctrl: l4per-clkctrl@28 {
-			compatible = "ti,clkctrl";
-			reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>;
-			#clock-cells = <2>;
-
-			assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
-			assigned-clock-parents = <&abe_24m_fclk>;
-		};
-
-		l4sec_clkctrl: l4sec-clkctrl@1a0 {
-			compatible = "ti,clkctrl";
-			reg = <0x1a0 0x2c>;
-			#clock-cells = <2>;
-		};
-
-		l4per2_clkctrl: l4per2-clkctrl@c {
-			compatible = "ti,clkctrl";
-			reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>;
-			#clock-cells = <2>;
-		};
-
-		l4per3_clkctrl: l4per3-clkctrl@14 {
-			compatible = "ti,clkctrl";
-			reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>;
-			#clock-cells = <2>;
-		};
-	};
-
-};
-
-&prm {
-	wkupaon_cm: wkupaon-cm@1800 {
-		compatible = "ti,omap4-cm";
-		reg = <0x1800 0x100>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x1800 0x100>;
-
-		wkupaon_clkctrl: wkupaon-clkctrl@20 {
-			compatible = "ti,clkctrl";
-			reg = <0x20 0x6c>;
-			#clock-cells = <2>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
deleted file mode 100644
index adfa559a488b..000000000000
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ /dev/null
@@ -1,88 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree for EFM32GG-DK3750 development board.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf
- */
-
-/dts-v1/;
-#include "efm32gg.dtsi"
-
-/ {
-	model = "Energy Micro Giant Gecko Development Kit";
-	compatible = "efm32,dk3750";
-
-	chosen {
-		bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
-	};
-
-	memory@88000000 {
-		device_type = "memory";
-		reg = <0x88000000 0x400000>;
-	};
-
-	soc {
-		adc@40002000 {
-			status = "ok";
-		};
-
-		i2c@4000a000 {
-			energymicro,location = <3>;
-			status = "ok";
-
-			temp@48 {
-				compatible = "st,stds75";
-				reg = <0x48>;
-			};
-
-			eeprom@50 {
-				compatible = "microchip,24c02", "atmel,24c02";
-				reg = <0x50>;
-				pagesize = <16>;
-			};
-		};
-
-		spi0: spi@4000c000 { /* USART0 */
-			cs-gpios = <&gpio 68 1>; // E4
-			energymicro,location = <1>;
-			status = "ok";
-
-			microsd@0 {
-				compatible = "mmc-spi-slot";
-				spi-max-frequency = <100000>;
-				voltage-ranges = <3200 3400>;
-				broken-cd;
-				reg = <0>;
-			};
-		};
-
-		spi1: spi@4000c400 { /* USART1 */
-			cs-gpios = <&gpio 51 1>; // D3
-			energymicro,location = <1>;
-			status = "ok";
-
-			ks8851@0 {
-				compatible = "ks8851";
-				spi-max-frequency = <6000000>;
-				reg = <0>;
-				interrupt-parent = <&boardfpga>;
-				interrupts = <4>;
-			};
-		};
-
-		uart4: uart@4000e400 { /* UART1 */
-			energymicro,location = <2>;
-			status = "ok";
-		};
-
-		boardfpga: boardfpga@80000000 {
-			compatible = "efm32board";
-			reg = <0x80000000 0x400>;
-			irq-gpios = <&gpio 64 1>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			status = "ok";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
deleted file mode 100644
index 8a58e49144cc..000000000000
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree for Energy Micro EFM32 Giant Gecko SoC.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
- */
-
-#include "armv7-m.dtsi"
-#include "dt-bindings/clock/efm32-cmu.h"
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		spi2 = &spi2;
-	};
-
-	soc {
-		adc: adc@40002000 {
-			compatible = "energymicro,efm32-adc";
-			reg = <0x40002000 0x400>;
-			interrupts = <7>;
-			clocks = <&cmu clk_HFPERCLKADC0>;
-			status = "disabled";
-		};
-
-		gpio: gpio@40006000 {
-			compatible = "energymicro,efm32-gpio";
-			reg = <0x40006000 0x1000>;
-			interrupts = <1 11>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			clocks = <&cmu clk_HFPERCLKGPIO>;
-			status = "ok";
-		};
-
-		i2c0: i2c@4000a000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "energymicro,efm32-i2c";
-			reg = <0x4000a000 0x400>;
-			interrupts = <9>;
-			clocks = <&cmu clk_HFPERCLKI2C0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4000a400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "energymicro,efm32-i2c";
-			reg = <0x4000a400 0x400>;
-			interrupts = <10>;
-			clocks = <&cmu clk_HFPERCLKI2C1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		spi0: spi@4000c000 { /* USART0 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "energymicro,efm32-spi";
-			reg = <0x4000c000 0x400>;
-			interrupts = <3 4>;
-			clocks = <&cmu clk_HFPERCLKUSART0>;
-			status = "disabled";
-		};
-
-		spi1: spi@4000c400 { /* USART1 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "energymicro,efm32-spi";
-			reg = <0x4000c400 0x400>;
-			interrupts = <15 16>;
-			clocks = <&cmu clk_HFPERCLKUSART1>;
-			status = "disabled";
-		};
-
-		spi2: spi@4000c800 { /* USART2 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "energymicro,efm32-spi";
-			reg = <0x4000c800 0x400>;
-			interrupts = <18 19>;
-			clocks = <&cmu clk_HFPERCLKUSART2>;
-			status = "disabled";
-		};
-
-		uart0: uart@4000c000 { /* USART0 */
-			compatible = "energymicro,efm32-uart";
-			reg = <0x4000c000 0x400>;
-			interrupts = <3 4>;
-			clocks = <&cmu clk_HFPERCLKUSART0>;
-			status = "disabled";
-		};
-
-		uart1: uart@4000c400 { /* USART1 */
-			compatible = "energymicro,efm32-uart";
-			reg = <0x4000c400 0x400>;
-			interrupts = <15 16>;
-			clocks = <&cmu clk_HFPERCLKUSART1>;
-			status = "disabled";
-		};
-
-		uart2: uart@4000c800 { /* USART2 */
-			compatible = "energymicro,efm32-uart";
-			reg = <0x4000c800 0x400>;
-			interrupts = <18 19>;
-			clocks = <&cmu clk_HFPERCLKUSART2>;
-			status = "disabled";
-		};
-
-		uart3: uart@4000e000 { /* UART0 */
-			compatible = "energymicro,efm32-uart";
-			reg = <0x4000e000 0x400>;
-			interrupts = <20 21>;
-			clocks = <&cmu clk_HFPERCLKUART0>;
-			status = "disabled";
-		};
-
-		uart4: uart@4000e400 { /* UART1 */
-			compatible = "energymicro,efm32-uart";
-			reg = <0x4000e400 0x400>;
-			interrupts = <22 23>;
-			clocks = <&cmu clk_HFPERCLKUART1>;
-			status = "disabled";
-		};
-
-		timer0: timer@40010000 {
-			compatible = "energymicro,efm32-timer";
-			reg = <0x40010000 0x400>;
-			interrupts = <2>;
-			clocks = <&cmu clk_HFPERCLKTIMER0>;
-		};
-
-		timer1: timer@40010400 {
-			compatible = "energymicro,efm32-timer";
-			reg = <0x40010400 0x400>;
-			interrupts = <12>;
-			clocks = <&cmu clk_HFPERCLKTIMER1>;
-		};
-
-		timer2: timer@40010800 {
-			compatible = "energymicro,efm32-timer";
-			reg = <0x40010800 0x400>;
-			interrupts = <13>;
-			clocks = <&cmu clk_HFPERCLKTIMER2>;
-		};
-
-		timer3: timer@40010c00 {
-			compatible = "energymicro,efm32-timer";
-			reg = <0x40010c00 0x400>;
-			interrupts = <14>;
-			clocks = <&cmu clk_HFPERCLKTIMER3>;
-		};
-
-		cmu: cmu@400c8000 {
-			compatible = "efm32gg,cmu";
-			reg = <0x400c8000 0x400>;
-			interrupts = <32>;
-			#clock-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
deleted file mode 100644
index 20446a846a98..000000000000
--- a/arch/arm/boot/dts/exynos3250-artik5-eval.dts
+++ /dev/null
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
- *
- * Copyright (c) 2016 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's ARTIK5 evaluation board
- * which is based on Samsung Exynos3250 SoC.
- */
-
-/dts-v1/;
-#include "exynos3250-artik5.dtsi"
-
-/ {
-	model = "Samsung ARTIK5 evaluation board";
-	compatible = "samsung,artik5-eval", "samsung,artik5",
-			"samsung,exynos3250", "samsung,exynos3";
-};
-
-&mshc_2 {
-	cap-sd-highspeed;
-	disable-wp;
-	vqmmc-supply = <&ldo3_reg>;
-	card-detect-delay = <200>;
-	clock-frequency = <100000000>;
-	max-frequency = <100000000>;
-	samsung,dw-mshc-ciu-div = <1>;
-	samsung,dw-mshc-sdr-timing = <0 1>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
deleted file mode 100644
index 7c39dd1c4d3a..000000000000
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ /dev/null
@@ -1,492 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4210 based Trats board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Device tree source file for Samsung's Trats board which is based on
- * Samsung's Exynos4210 SoC.
- */
-
-/dts-v1/;
-#include "exynos4210.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Samsung Trats based on Exynos4210";
-	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg =  <0x40000000 0x10000000
-			0x50000000 0x10000000
-			0x60000000 0x10000000
-			0x70000000 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-		stdout-path = "serial2:115200n8";
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		vemmc_reg: regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		tsp_reg: regulator-1 {
-			compatible = "regulator-fixed";
-			regulator-name = "TSP_FIXED_VOLTAGES";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		cam_af_28v_reg: regulator-2 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_AF_2.8V_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		cam_io_en_reg: regulator-3 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_IO_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		cam_io_12v_reg: regulator-4 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_1.2V_EN";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vt_core_15v_reg: regulator-5 {
-			compatible = "regulator-fixed";
-			regulator-name = "VT_CORE_1.5V";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		vol-down-key {
-			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		vol-up-key {
-			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		power-key {
-			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-
-		ok-key {
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,code = <352>;
-			label = "ok";
-			debounce-interval = <10>;
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
-			       };
-		       };
-		};
-	};
-
-};
-
-&camera {
-	pinctrl-names = "default";
-	pinctrl-0 = <>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu0-supply = <&varm_breg>;
-};
-
-&dsi_0 {
-	vddcore-supply = <&vusb_reg>;
-	vddio-supply = <&vmipi_reg>;
-	samsung,burst-clock-frequency = <500000000>;
-	samsung,esc-clock-frequency = <20000000>;
-	samsung,pll-clock-frequency = <24000000>;
-	status = "okay";
-
-	panel@0 {
-		reg = <0>;
-		compatible = "samsung,s6e8aa0";
-		vdd3-supply = <&vcclcd_reg>;
-		vci-supply = <&vlcd_reg>;
-		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
-		power-on-delay= <50>;
-		reset-delay = <100>;
-		init-delay = <100>;
-		flip-horizontal;
-		flip-vertical;
-		panel-width-mm = <58>;
-		panel-height-mm = <103>;
-
-		display-timings {
-			timing-0 {
-				clock-frequency = <57153600>;
-				hactive = <720>;
-				vactive = <1280>;
-				hfront-porch = <5>;
-				hback-porch = <5>;
-				hsync-len = <5>;
-				vfront-porch = <13>;
-				vback-porch = <1>;
-				vsync-len = <2>;
-			};
-		};
-	};
-};
-
-&exynos_usbphy {
-	status = "okay";
-	vbus-supply = <&safe1_sreg>;
-};
-
-&fimc_0 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-			  <&clock CLK_SCLK_FIMC0>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_1 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-			  <&clock CLK_SCLK_FIMC1>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_2 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-			  <&clock CLK_SCLK_FIMC2>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-		assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimc_3 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-			  <&clock CLK_SCLK_FIMC3>;
-	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-	assigned-clock-rates = <0>, <160000000>;
-};
-
-&fimd {
-	status = "okay";
-};
-
-&gpu {
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&vusb_reg>;
-	vusb_a-supply = <&vusbdac_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	mms114-touchscreen@48 {
-		compatible = "melfas,mms114";
-		reg = <0x48>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-size-x = <720>;
-		touchscreen-size-y = <1280>;
-		avdd-supply = <&tsp_reg>;
-		vdd-supply = <&tsp_reg>;
-	};
-};
-
-&i2c_5 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c5_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	max8997_pmic@66 {
-		compatible = "maxim,max8997-pmic";
-		interrupts-extended = <&gpx0 7 0>, <&gpx2 3 0>;
-
-		reg = <0x66>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
-
-		max8997,pmic-buck1-uses-gpio-dvs;
-		max8997,pmic-buck2-uses-gpio-dvs;
-		max8997,pmic-buck5-uses-gpio-dvs;
-
-		max8997,pmic-ignore-gpiodvs-side-effect;
-		max8997,pmic-buck125-default-dvs-idx = <0>;
-
-		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
-						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
-						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
-
-		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
-						 <1250000>, <1200000>,
-						 <1150000>, <1100000>,
-						 <1000000>, <950000>;
-
-		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
-						 <950000>,  <900000>,
-						 <1100000>, <1000000>,
-						 <950000>,  <900000>;
-
-		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>,
-						 <1200000>, <1200000>;
-
-		regulators {
-			valive_reg: LDO2 {
-			     regulator-name = "VALIVE_1.1V_C210";
-			     regulator-min-microvolt = <1100000>;
-			     regulator-max-microvolt = <1100000>;
-			     regulator-always-on;
-			};
-
-			vusb_reg: LDO3 {
-			     regulator-name = "VUSB_1.1V_C210";
-			     regulator-min-microvolt = <1100000>;
-			     regulator-max-microvolt = <1100000>;
-			};
-
-			vmipi_reg: LDO4 {
-			     regulator-name = "VMIPI_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
-			};
-
-			vpda_reg: LDO6 {
-			     regulator-name = "VCC_1.8V_PDA";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
-			     regulator-always-on;
-			};
-
-			vcam_reg: LDO7 {
-			     regulator-name = "CAM_ISP_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
-			};
-
-			vusbdac_reg: LDO8 {
-			     regulator-name = "VUSB+VDAC_3.3V_C210";
-			     regulator-min-microvolt = <3300000>;
-			     regulator-max-microvolt = <3300000>;
-			};
-
-			vccpda_reg: LDO9 {
-			     regulator-name = "VCC_2.8V_PDA";
-			     regulator-min-microvolt = <2800000>;
-			     regulator-max-microvolt = <2800000>;
-			     regulator-always-on;
-			};
-
-			vpll_reg: LDO10 {
-			     regulator-name = "VPLL_1.1V_C210";
-			     regulator-min-microvolt = <1100000>;
-			     regulator-max-microvolt = <1100000>;
-			     regulator-always-on;
-			};
-
-			vtcam_reg: LDO12 {
-			     regulator-name = "VT_CAM_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
-			};
-
-			vcclcd_reg: LDO13 {
-			     regulator-name = "VCC_3.3V_LCD";
-			     regulator-min-microvolt = <3300000>;
-			     regulator-max-microvolt = <3300000>;
-			};
-
-			vlcd_reg: LDO15 {
-			     regulator-name = "VLCD_2.2V";
-			     regulator-min-microvolt = <2200000>;
-			     regulator-max-microvolt = <2200000>;
-			};
-
-			camsensor_reg: LDO16 {
-			     regulator-name = "CAM_SENSOR_IO_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
-			};
-
-			tflash_reg: LDO17 {
-			     regulator-name = "VTF_2.8V";
-			     regulator-min-microvolt = <2800000>;
-			     regulator-max-microvolt = <2800000>;
-			};
-
-			vddq_reg: LDO21 {
-			     regulator-name = "VDDQ_M1M2_1.2V";
-			     regulator-min-microvolt = <1200000>;
-			     regulator-max-microvolt = <1200000>;
-			     regulator-always-on;
-			};
-
-			varm_breg: BUCK1 {
-			     /*
-			      * HACK: The real name is VARM_1.2V_C210,
-			      * but exynos-cpufreq does not support
-			      * DT-based regulator lookup yet.
-			      */
-			     regulator-name = "vdd_arm";
-			     regulator-min-microvolt = <900000>;
-			     regulator-max-microvolt = <1350000>;
-			     regulator-always-on;
-			};
-
-			vint_breg: BUCK2 {
-			     regulator-name = "VINT_1.1V_C210";
-			     regulator-min-microvolt = <900000>;
-			     regulator-max-microvolt = <1100000>;
-			     regulator-always-on;
-			};
-
-			camisp_breg: BUCK4 {
-			     regulator-name = "CAM_ISP_CORE_1.2V";
-			     regulator-min-microvolt = <1200000>;
-			     regulator-max-microvolt = <1200000>;
-			};
-
-			vmem_breg: BUCK5 {
-			     regulator-name = "VMEM_1.2V_C210";
-			     regulator-min-microvolt = <1200000>;
-			     regulator-max-microvolt = <1200000>;
-			     regulator-always-on;
-			};
-
-			vccsub_breg: BUCK7 {
-			     regulator-name = "VCC_SUB_2.0V";
-			     regulator-min-microvolt = <2000000>;
-			     regulator-max-microvolt = <2000000>;
-			     regulator-always-on;
-			};
-
-			safe1_sreg: ESAFEOUT1 {
-			     regulator-name = "SAFEOUT1";
-			};
-
-			safe2_sreg: ESAFEOUT2 {
-			     regulator-name = "SAFEOUT2";
-			     regulator-boot-on;
-			};
-		};
-	};
-};
-
-&sdhci_0 {
-	bus-width = <8>;
-	non-removable;
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-	pinctrl-names = "default";
-	vmmc-supply = <&vemmc_reg>;
-	status = "okay";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-	pinctrl-names = "default";
-	vmmc-supply = <&tflash_reg>;
-	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&tmu {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
deleted file mode 100644
index f220716239db..000000000000
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ /dev/null
@@ -1,532 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4210 SoC device tree source
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2010-2011 Linaro Ltd.
- *		www.linaro.org
- *
- * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
- * based board files can include this file and provide values for board specific
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
- * nodes can be added to this file.
- */
-
-#include "exynos4.dtsi"
-#include "exynos4-cpu-thermal.dtsi"
-
-/ {
-	compatible = "samsung,exynos4210", "samsung,exynos4";
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@900 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x900>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			clock-latency = <160000>;
-
-			operating-points = <
-				1200000 1250000
-				1000000 1150000
-				800000	1075000
-				500000	975000
-				400000	975000
-				200000	950000
-			>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu1: cpu@901 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0x901>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			clock-latency = <160000>;
-
-			operating-points = <
-				1200000 1250000
-				1000000 1150000
-				800000	1075000
-				500000	975000
-				400000	975000
-				200000	950000
-			>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	soc: soc {
-		sysram: sysram@2020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x20000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x20000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@1f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x1f000 0x1000>;
-			};
-		};
-
-		pd_lcd1: lcd1-power-domain@10023ca0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
-			#power-domain-cells = <0>;
-			label = "LCD1";
-		};
-
-		l2c: l2-cache-controller@10502000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10502000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			arm,tag-latency = <2 2 1>;
-			arm,data-latency = <2 2 1>;
-		};
-
-		mct: mct@10050000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x10050000 0x800>;
-			interrupt-parent = <&mct_map>;
-			interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			mct_map: mct-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map =
-					<0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
-					<1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
-					<2 &combiner 12 6>,
-					<3 &combiner 12 7>,
-					<4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>,
-					<5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		watchdog: watchdog@10060000 {
-			compatible = "samsung,s3c6410-wdt";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_WDT>;
-			clock-names = "watchdog";
-		};
-
-		clock: clock-controller@10030000 {
-			compatible = "samsung,exynos4210-clock";
-			reg = <0x10030000 0x20000>;
-			#clock-cells = <1>;
-		};
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos4210-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos4210-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakup_eint: wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_2: pinctrl@3860000 {
-			compatible = "samsung,exynos4210-pinctrl";
-			reg = <0x03860000 0x1000>;
-		};
-
-		g2d: g2d@12800000 {
-			compatible = "samsung,s5pv210-g2d";
-			reg = <0x12800000 0x1000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-			clock-names = "sclk_fimg2d", "fimg2d";
-			power-domains = <&pd_lcd0>;
-			iommus = <&sysmmu_g2d>;
-		};
-
-		ppmu_acp: ppmu_acp@10ae0000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x10ae0000 0x2000>;
-			status = "disabled";
-		};
-
-		ppmu_lcd1: ppmu_lcd1@12240000 {
-			compatible = "samsung,exynos-ppmu";
-			reg = <0x12240000 0x2000>;
-			clocks = <&clock CLK_PPMULCD1>;
-			clock-names = "ppmu";
-			status = "disabled";
-		};
-
-		sysmmu_g2d: sysmmu@12a20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12A20000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 7>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			power-domains = <&pd_lcd0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimd1: sysmmu@12220000 {
-			compatible = "samsung,exynos-sysmmu";
-			interrupt-parent = <&combiner>;
-			reg = <0x12220000 0x1000>;
-			interrupts = <5 3>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
-			power-domains = <&pd_lcd1>;
-			#iommu-cells = <0>;
-		};
-
-		bus_dmc: bus_dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_acp: bus_acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_ACP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus_peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus_fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK133>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_opp_table>;
-			status = "disabled";
-		};
-
-		bus_display: bus_display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			status = "disabled";
-		};
-
-		bus_lcd0: bus_lcd0 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK200>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus: bus_leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus_rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus_mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp_table1 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <1025000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <1050000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1150000>;
-				opp-suspend;
-			};
-		};
-
-		bus_acp_opp_table: opp_table2 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp_table3 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-5000000 {
-				opp-hz = /bits/ 64 <5000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-
-		bus_fsys_opp_table: opp_table4 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-10000000 {
-				opp-hz = /bits/ 64 <10000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-
-		bus_display_opp_table: opp_table5 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-		};
-
-		bus_leftbus_opp_table: opp_table6 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-suspend;
-			};
-		};
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
-
-			trips {
-				cpu_alert0: cpu-alert-0 {
-					temperature = <85000>; /* millicelsius */
-				};
-				cpu_alert1: cpu-alert-1 {
-					temperature = <100000>; /* millicelsius */
-				};
-				cpu_alert2: cpu-alert-2 {
-					temperature = <110000>; /* millicelsius */
-				};
-			};
-		};
-	};
-};
-
-&gic {
-	cpu-offset = <0x8000>;
-};
-
-&camera {
-	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-};
-
-&combiner {
-	samsung,combiner-nr = <16>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&fimc_0 {
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,cam-if;
-};
-
-&fimc_1 {
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,cam-if;
-};
-
-&fimc_2 {
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,lcd-wb;
-};
-
-&fimc_3 {
-	samsung,pix-limits = <1920 8192 1366 1920>;
-	samsung,rotators = <0>;
-	samsung,mainscaler-ext;
-	samsung,lcd-wb;
-};
-
-&gpu {
-	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "gp",
-			  "gpmmu",
-			  "pp0",
-			  "ppmmu0",
-			  "pp1",
-			  "ppmmu1",
-			  "pp2",
-			  "ppmmu2",
-			  "pp3",
-			  "ppmmu3";
-	operating-points-v2 = <&gpu_opp_table>;
-
-	gpu_opp_table: opp_table {
-		compatible = "operating-points-v2";
-
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-			opp-microvolt = <1050000>;
-		};
-	};
-};
-
-&mdma1 {
-	power-domains = <&pd_lcd0>;
-};
-
-&mixer {
-	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
-		      "sclk_mixer";
-	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
-		 <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
-};
-
-&pmu {
-	interrupts = <2 2>, <3 2>;
-	interrupt-affinity = <&cpu0>, <&cpu1>;
-	status = "okay";
-};
-
-&pmu_system_controller {
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
-	#clock-cells = <1>;
-};
-
-&rotator {
-	power-domains = <&pd_lcd0>;
-};
-
-&sysmmu_rotator {
-	power-domains = <&pd_lcd0>;
-};
-
-&tmu {
-	compatible = "samsung,exynos4210-tmu";
-	clocks = <&clock CLK_TMU_APBIF>;
-	clock-names = "tmu_apbif";
-	samsung,tmu_gain = <15>;
-	samsung,tmu_reference_voltage = <7>;
-};
-
-#include "exynos4210-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
deleted file mode 100644
index ce87d2ff27aa..000000000000
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ /dev/null
@@ -1,170 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 based Galaxy S3 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos4412-midas.dtsi"
-
-/ {
-	aliases {
-		i2c9 = &i2c_ak8975;
-		i2c10 = &i2c_cm36651;
-	};
-
-	aat1290 {
-		compatible = "skyworks,aat1290";
-		flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
-		enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-names = "default", "host", "isp";
-		pinctrl-0 = <&camera_flash_host>;
-		pinctrl-1 = <&camera_flash_host>;
-		pinctrl-2 = <&camera_flash_isp>;
-
-		flash-led {
-			label = "flash";
-			led-max-microamp = <520833>;
-			flash-max-microamp = <1012500>;
-			flash-max-timeout-us = <1940000>;
-		};
-	};
-
-	lcd_vdd3_reg: voltage-regulator-6 {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD_VDD_2.2V";
-		regulator-min-microvolt = <2200000>;
-		regulator-max-microvolt = <2200000>;
-		gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	ps_als_reg: voltage-regulator-7 {
-		compatible = "regulator-fixed";
-		regulator-name = "LED_A_3.0V";
-		regulator-min-microvolt = <3000000>;
-		regulator-max-microvolt = <3000000>;
-		gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	i2c_ak8975: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		ak8975@c {
-			compatible = "asahi-kasei,ak8975";
-			reg = <0x0c>;
-			gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	i2c_cm36651: i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cm36651@18 {
-			compatible = "capella,cm36651";
-			reg = <0x18>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-			vled-supply = <&ps_als_reg>;
-		};
-	};
-};
-
-&buck9_reg {
-	maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
-};
-
-&cam_af_reg {
-	gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&cam_io_reg {
-	gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&dsi_0 {
-	status = "okay";
-
-	panel@0 {
-		compatible = "samsung,s6e8aa0";
-		reg = <0>;
-		vdd3-supply = <&lcd_vdd3_reg>;
-		vci-supply = <&ldo25_reg>;
-		reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
-		power-on-delay= <50>;
-		reset-delay = <100>;
-		init-delay = <100>;
-		flip-horizontal;
-		flip-vertical;
-		panel-width-mm = <58>;
-		panel-height-mm = <103>;
-
-		display-timings {
-			timing-0 {
-				clock-frequency = <57153600>;
-				hactive = <720>;
-				vactive = <1280>;
-				hfront-porch = <5>;
-				hback-porch = <5>;
-				hsync-len = <5>;
-				vfront-porch = <13>;
-				vback-porch = <1>;
-				vsync-len = <2>;
-			};
-		};
-	};
-};
-
-&i2c_3 {
-	mms114-touchscreen@48 {
-		compatible = "melfas,mms114";
-		reg = <0x48>;
-		interrupt-parent = <&gpm2>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-size-x = <720>;
-		touchscreen-size-y = <1280>;
-		avdd-supply = <&ldo23_reg>;
-		vdd-supply = <&ldo24_reg>;
-	};
-};
-
-&ldo25_reg {
-	regulator-name = "LCD_VCC_3.3V";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&pinctrl_0 {
-	camera_flash_host: camera-flash-host {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-val = <0>;
-	};
-
-	camera_flash_isp: camera-flash-isp {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-val = <1>;
-	};
-};
-
-&s5c73m3 {
-	standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
-	vdda-supply = <&ldo17_reg>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
deleted file mode 100644
index fe2bfd76cc4e..000000000000
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ /dev/null
@@ -1,75 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "exynos4412-midas.dtsi"
-
-/ {
-	compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
-	model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg =  <0x40000000 0x80000000>;
-	};
-
-	/* bootargs are passed in by bootloader */
-
-	cam_vdda_reg: voltage-regulator-6 {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM_SENSOR_CORE_1.2V";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&buck9_reg {
-	maxim,ena-gpios = <&gpm1 0 GPIO_ACTIVE_HIGH>;
-};
-
-&cam_af_reg {
-	gpio = <&gpm1 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&cam_io_reg {
-	gpio = <&gpm0 7 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	mms152-touchscreen@48 {
-		compatible = "melfas,mms152";
-		reg = <0x48>;
-		interrupt-parent = <&gpm2>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		x-size = <720>;
-		y-size = <1280>;
-		avdd-supply = <&ldo23_reg>;
-		vdd-supply = <&ldo24_reg>;
-	};
-};
-
-&ldo13_reg {
-	regulator-name = "VCC_1.8V_LCD";
-	regulator-always-on;
-};
-
-&ldo25_reg {
-	regulator-name = "VCI_3.0V_LCD";
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-};
-
-&s5c73m3 {
-	standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
-	vdda-supply = <&cam_vdda_reg>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
deleted file mode 100644
index 8ff243ba4542..000000000000
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel's Exynos4412 based ODROID-U3 board device tree source
- *
- * Copyright (c) 2014 Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * Device tree source file for Hardkernel's ODROID-U3 board which is based
- * on Samsung's Exynos4412 SoC.
- */
-
-/dts-v1/;
-#include "exynos4412-odroid-common.dtsi"
-#include "exynos4412-prime.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-U3 board based on Exynos4412";
-	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x7FF00000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "led1:heart";
-			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm 0 10000 0>;
-		#cooling-cells = <2>;
-		cooling-levels = <0 102 170 230>;
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-				     trip = <&cpu_alert1>;
-				     cooling-device = <&cpu0 9 9>, <&cpu1 9 9>,
-						      <&cpu2 9 9>, <&cpu3 9 9>,
-						      <&fan0 1 2>;
-				};
-				map1 {
-				     trip = <&cpu_alert2>;
-				     cooling-device = <&cpu0 15 15>,
-						      <&cpu1 15 15>,
-						      <&cpu2 15 15>,
-						      <&cpu3 15 15>,
-						      <&fan0 2 3>;
-				};
-				map2 {
-				     trip = <&cpu_alert0>;
-				     cooling-device = <&fan0 0 1>;
-				};
-			};
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo10_reg>;
-	/* Nothing connected to ADC inputs, keep it disabled */
-};
-
-/* Supply for LAN9730/SMSC95xx */
-&buck8_reg {
-	regulator-name = "BUCK8_P3V3";
-	regulator-min-microvolt = <3300000>;
-	regulator-max-microvolt = <3300000>;
-};
-
-&hdmicec {
-	needs-hpd;
-};
-
-/* VDDQ for MSHC (eMMC card) */
-&ldo22_reg {
-	regulator-name = "LDO22_VDDQ_MMC4_2.8V";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&mshc_0 {
-	vqmmc-supply = <&ldo22_reg>;
-};
-
-&pwm {
-	pinctrl-0 = <&pwm0_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>;
-	status = "okay";
-};
-
-&usb3503 {
-	clock-names = "refclk";
-	clocks = <&pmu_system_controller 0>;
-	refclk-frequency = <24000000>;
-};
-
-&ehci {
-	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
-	phy-names = "hsic0", "hsic1";
-};
-
-&sound {
-	model = "Odroid-U3";
-	samsung,audio-widgets =
-		"Headphone", "Headphone Jack",
-		"Speakers", "Speakers";
-	samsung,audio-routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"Headphone Jack", "MICBIAS",
-		"IN1", "Headphone Jack",
-		"Speakers", "SPKL",
-		"Speakers", "SPKR";
-};
-
-&spi_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_bus>;
-	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
deleted file mode 100644
index 3ea2a0101e80..000000000000
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel's Exynos4412 based ODROID-X board device tree source
- *
- * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
- *
- * Device tree source file for Hardkernel's ODROID-X board which is based
- * on Samsung's Exynos4412 SoC.
- */
-
-/dts-v1/;
-#include "exynos4412-odroid-common.dtsi"
-
-/ {
-	model = "Hardkernel ODROID-X board based on Exynos4412";
-	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x3FF00000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		led1 {
-			label = "led1:heart";
-			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-		led2 {
-			label = "led2:mmc0";
-			gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	gpio_keys {
-		pinctrl-0 = <&gpio_power_key &gpio_home_key>;
-
-		home_key {
-			gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_HOME>;
-			label = "home key";
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	regulator_p3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "p3v3_en";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo10_reg>;
-	status = "okay";
-};
-
-/* VDDQ for MSHC (eMMC card) */
-&buck8_reg {
-	regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
-	regulator-min-microvolt = <2800000>;
-	regulator-max-microvolt = <2800000>;
-};
-
-&ehci {
-	phys = <&exynos_usbphy 2>;
-	phy-names = "hsic0";
-};
-
-&mshc_0 {
-	vqmmc-supply = <&buck8_reg>;
-};
-
-&pinctrl_1 {
-	gpio_home_key: home_key {
-		samsung,pins = "gpx2-2";
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	};
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&sound {
-	model = "Odroid-X";
-	samsung,audio-widgets =
-		"Headphone", "Headphone Jack",
-		"Microphone", "Mic Jack",
-		"Microphone", "DMIC";
-	samsung,audio-routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"IN1", "Mic Jack",
-		"Mic Jack", "MICBIAS";
-};
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
deleted file mode 100644
index d7d5fdc230d8..000000000000
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ /dev/null
@@ -1,979 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- */
-
-#include <dt-bindings/pinctrl/samsung.h>
-
-#define PIN_SLP(_pin, _mode, _pull)					\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
-	}
-
-&pinctrl_0 {
-	gpa0: gpa0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf2: gpf2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf3: gpf3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj0: gpj0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpj1: gpj1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c2_bus: i2c2-bus {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart2_fctl: uart2-fctl {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart_audio_a: uart-audio-a {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c3_bus: i2c3-bus {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	uart_audio_b: uart-audio-b {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c4_bus: i2c4-bus {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c5_bus: i2c5-bus {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s1_bus: i2s1-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm1_bus: pcm1-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	ac97_bus: ac97-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm2_bus: pcm2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spdif_bus: spdif-bus {
-		samsung,pins = "gpc1-0", "gpc1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c6_bus: i2c6-bus {
-		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	spi2_bus: spi2-bus {
-		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm0_out: pwm0-out {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm1_out: pwm1-out {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_ctrl: lcd-ctrl {
-		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c7_bus: i2c7-bus {
-		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm2_out: pwm2-out {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pwm3_out: pwm3-out {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	mipi0_clk: mipi0-clk {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	i2c1_bus: i2c1-bus {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	mipi1_clk: mipi1-clk {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_clk: lcd-clk {
-		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data16: lcd-data-width16 {
-		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data18: lcd-data-width18 {
-		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-				"gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_data24: lcd-data-width24 {
-		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	lcd_ldi: lcd-ldi {
-		samsung,pins = "gpf3-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_a_io: cam-port-a-io {
-		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_a_clk_active: cam-port-a-clk-active {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
-		samsung,pins = "gpj1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_1 {
-	gpk0: gpk0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk1: gpk1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk2: gpk2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk3: gpk3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl0: gpl0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl1: gpl1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl2: gpl2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm0: gpm0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm1: gpm1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm2: gpm2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm3: gpm3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm4: gpm4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpy0: gpy0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy1: gpy1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy2: gpy2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy3: gpy3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy4: gpy4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy5: gpy5 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpy6: gpy6 {
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpx0: gpx0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_cd: sd0-cd {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus1: sd0-bus-width1 {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus4: sd0-bus-width4 {
-		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd0_bus8: sd0-bus-width8 {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_clk: sd4-clk {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_cmd: sd4-cmd {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_cd: sd4-cd {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus1: sd4-bus-width1 {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus4: sd4-bus-width4 {
-		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd4_bus8: sd4-bus-width8 {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpk1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpk1-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_cd: sd1-cd {
-		samsung,pins = "gpk1-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pins = "gpk1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_clk: sd2-clk {
-		samsung,pins = "gpk2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cmd: sd2-cmd {
-		samsung,pins = "gpk2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_cd: sd2-cd {
-		samsung,pins = "gpk2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus1: sd2-bus-width1 {
-		samsung,pins = "gpk2-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus4: sd2-bus-width4 {
-		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd2_bus8: sd2-bus-width8 {
-		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_clk: sd3-clk {
-		samsung,pins = "gpk3-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cmd: sd3-cmd {
-		samsung,pins = "gpk3-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_cd: sd3-cd {
-		samsung,pins = "gpk3-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus1: sd3-bus-width1 {
-		samsung,pins = "gpk3-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	sd3_bus4: sd3-bus-width4 {
-		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_io: cam-port-b-io {
-		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	cam_port_b_clk_active: cam-port-b-clk-active {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
-	};
-
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint0: ext-int0 {
-		samsung,pins = "gpx0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint8: ext-int8 {
-		samsung,pins = "gpx1-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint15: ext-int15 {
-		samsung,pins = "gpx1-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint16: ext-int16 {
-		samsung,pins = "gpx2-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	eint31: ext-int31 {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c0: fimc-is-i2c0 {
-		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_i2c1: fimc-is-i2c1 {
-		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	fimc_is_uart: fimc-is-uart {
-		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	hdmi_cec: hdmi-cec {
-		samsung,pins = "gpx3-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_2 {
-	gpz: gpz {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	i2s0_bus: i2s0-bus {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-
-	pcm0_bus: pcm0-bus {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
-
-&pinctrl_3 {
-	gpv0: gpv0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv1: gpv1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv2: gpv2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv3: gpv3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpv4: gpv4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	c2c_bus: c2c-bus {
-		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-				"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-				"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-				"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
-				"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-				"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-				"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-				"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
-				"gpv4-0", "gpv4-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
deleted file mode 100644
index 3a3b2fafefdd..000000000000
--- a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos4412 PPMU common device tree
- *
- * Copyright (C) 2015 Samsung Electronics
- * Author: Chanwoo Choi <cw00.choi@samsung.com>
- */
-
-&ppmu_dmc0 {
-       status = "okay";
-
-       events {
-	       ppmu_dmc0_3: ppmu-event3-dmc0 {
-		       event-name = "ppmu-event3-dmc0";
-	       };
-       };
-};
-
-&ppmu_dmc1 {
-       status = "okay";
-
-       events {
-	       ppmu_dmc1_3: ppmu-event3-dmc1 {
-		       event-name = "ppmu-event3-dmc1";
-	       };
-       };
-};
-
-&ppmu_leftbus {
-       status = "okay";
-
-       events {
-	       ppmu_leftbus_3: ppmu-event3-leftbus {
-		       event-name = "ppmu-event3-leftbus";
-	       };
-       };
-};
-
-&ppmu_rightbus {
-       status = "okay";
-
-       events {
-	       ppmu_rightbus_3: ppmu-event3-rightbus {
-		       event-name = "ppmu-event3-rightbus";
-	       };
-       };
-};
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
deleted file mode 100644
index 01f37b5ac9c4..000000000000
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * FriendlyARM's Exynos4412 based TINY4412 board device tree source
- *
- * Copyright (c) 2013 Alex Ling <kasimling@gmail.com>
- *
- * Device tree source file for FriendlyARM's TINY4412 board which is based on
- * Samsung's Exynos4412 SoC.
- */
-
-/dts-v1/;
-#include "exynos4412.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "FriendlyARM TINY4412 board based on Exynos4412";
-	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
-
-	chosen {
-		stdout-path = &serial_0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x40000000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1 {
-			label = "led1";
-			gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "led2";
-			gpios = <&gpm4 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led3 {
-			label = "led3";
-			gpios = <&gpm4 2 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led4 {
-			label = "led4";
-			gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
deleted file mode 100644
index d20db2dfe8e2..000000000000
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ /dev/null
@@ -1,811 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos4412 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
- * nodes can be added to this file.
- */
-
-#include "exynos4.dtsi"
-
-#include "exynos4-cpu-thermal.dtsi"
-
-/ {
-	compatible = "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		fimc-lite0 = &fimc_lite_0;
-		fimc-lite1 = &fimc_lite_1;
-		mshc0 = &mshc_0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@a00 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA00>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu1: cpu@a01 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA01>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu2: cpu@a02 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA02>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu3: cpu@a03 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA03>;
-			clocks = <&clock CLK_ARM_CLK>;
-			clock-names = "cpu";
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-	};
-
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <900000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <925000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-500000000 {
-			opp-hz = /bits/ 64 <500000000>;
-			opp-microvolt = <950000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <975000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <987500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1000000>;
-			clock-latency-ns = <200000>;
-			opp-suspend;
-		};
-		opp-900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = <1037500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1087500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1137500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1187500>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1250000>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1287500>;
-			clock-latency-ns = <200000>;
-		};
-		cpu0_opp_1500: opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1350000>;
-			clock-latency-ns = <200000>;
-			turbo-mode;
-		};
-	};
-
-
-	soc: soc {
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakup_eint: wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_2: pinctrl@3860000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 0>;
-		};
-
-		pinctrl_3: pinctrl@106e0000 {
-			compatible = "samsung,exynos4x12-pinctrl";
-			reg = <0x106E0000 0x1000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sysram@2020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x40000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x40000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@2f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x2f000 0x1000>;
-			};
-		};
-
-		pd_isp: isp-power-domain@10023ca0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
-			#power-domain-cells = <0>;
-			label = "ISP";
-		};
-
-		l2c: l2-cache-controller@10502000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10502000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			arm,tag-latency = <2 2 1>;
-			arm,data-latency = <3 2 1>;
-			arm,double-linefill = <1>;
-			arm,double-linefill-incr = <0>;
-			arm,double-linefill-wrap = <1>;
-			arm,prefetch-drop = <1>;
-			arm,prefetch-offset = <7>;
-		};
-
-		clock: clock-controller@10030000 {
-			compatible = "samsung,exynos4412-clock";
-			reg = <0x10030000 0x18000>;
-			#clock-cells = <1>;
-		};
-
-		isp_clock: clock-controller@10048000 {
-			compatible = "samsung,exynos4412-isp-clock";
-			reg = <0x10048000 0x1000>;
-			#clock-cells = <1>;
-			power-domains = <&pd_isp>;
-			clocks = <&clock CLK_ACLK200>,
-				 <&clock CLK_ACLK400_MCUISP>;
-			clock-names = "aclk200", "aclk400_mcuisp";
-		};
-
-		mct@10050000 {
-			compatible = "samsung,exynos4412-mct";
-			reg = <0x10050000 0x800>;
-			interrupt-parent = <&mct_map>;
-			interrupts = <0>, <1>, <2>, <3>, <4>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			mct_map: mct-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map =
-					<0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
-					<1 &combiner 12 5>,
-					<2 &combiner 12 6>,
-					<3 &combiner 12 7>,
-					<4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		watchdog: watchdog@10060000 {
-			compatible = "samsung,exynos5250-wdt";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_WDT>;
-			clock-names = "watchdog";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-		};
-
-		adc: adc@126c0000 {
-			compatible = "samsung,exynos4212-adc";
-			reg = <0x126C0000 0x100>;
-			interrupt-parent = <&combiner>;
-			interrupts = <10 3>;
-			clocks = <&clock CLK_TSADC>;
-			clock-names = "adc";
-			#io-channel-cells = <1>;
-			io-channel-ranges;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-		};
-
-		g2d: g2d@10800000 {
-			compatible = "samsung,exynos4212-g2d";
-			reg = <0x10800000 0x1000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-			clock-names = "sclk_fimg2d", "fimg2d";
-			iommus = <&sysmmu_g2d>;
-		};
-
-		mshc_0: mmc@12550000 {
-			compatible = "samsung,exynos4412-dw-mshc";
-			reg = <0x12550000 0x1000>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			fifo-depth = <0x80>;
-			clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
-			clock-names = "biu", "ciu";
-			status = "disabled";
-		};
-
-		sysmmu_g2d: sysmmu@10a40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 7>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_isp: sysmmu@12260000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12260000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 2>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_ISP>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_drc: sysmmu@12270000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12270000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 3>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_DRC>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_fd: sysmmu@122a0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122A0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 4>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_FD>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_mcuctl: sysmmu@122b0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x122B0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 5>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu";
-			clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite0: sysmmu@123b0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123B0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 0>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu", "master";
-			clocks = <&isp_clock CLK_ISP_SMMU_LITE0>,
-				 <&isp_clock CLK_ISP_FIMC_LITE0>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimc_lite1: sysmmu@123c0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x123C0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <16 1>;
-			power-domains = <&pd_isp>;
-			clock-names = "sysmmu", "master";
-			clocks = <&isp_clock CLK_ISP_SMMU_LITE1>,
-				 <&isp_clock CLK_ISP_FIMC_LITE1>;
-			#iommu-cells = <0>;
-		};
-
-		bus_dmc: bus_dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_acp: bus_acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_ACP>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_c2c: bus_c2c {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_C2C>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_dmc_opp_table: opp_table1 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-400000000 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <1050000>;
-				opp-suspend;
-			};
-		};
-
-		bus_acp_opp_table: opp_table2 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_leftbus: bus_leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_rightbus: bus_rightbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDR>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_display: bus_display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus_fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK133>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus_peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK100>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus_mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_SCLK_MFC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			status = "disabled";
-		};
-
-		bus_leftbus_opp_table: opp_table3 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				opp-microvolt = <900000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-				opp-microvolt = <925000>;
-			};
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-				opp-microvolt = <950000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-				opp-microvolt = <1000000>;
-				opp-suspend;
-			};
-		};
-
-		bus_display_opp_table: opp_table4 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-160000000 {
-				opp-hz = /bits/ 64 <160000000>;
-			};
-			opp-200000000 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_fsys_opp_table: opp_table5 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp-134000000 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp_table6 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-			};
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-	};
-};
-
-&combiner {
-	samsung,combiner-nr = <20>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&camera {
-	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-	/* fimc_[0-3] are configured outside, under phandles */
-	fimc_lite_0: fimc-lite@12390000 {
-		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x12390000 0x1000>;
-		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
-		clock-names = "flite";
-		iommus = <&sysmmu_fimc_lite0>;
-		status = "disabled";
-	};
-
-	fimc_lite_1: fimc-lite@123a0000 {
-		compatible = "samsung,exynos4212-fimc-lite";
-		reg = <0x123A0000 0x1000>;
-		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
-		clock-names = "flite";
-		iommus = <&sysmmu_fimc_lite1>;
-		status = "disabled";
-	};
-
-	fimc_is: fimc-is@12000000 {
-		compatible = "samsung,exynos4212-fimc-is";
-		reg = <0x12000000 0x260000>;
-		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-		power-domains = <&pd_isp>;
-		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
-			 <&isp_clock CLK_ISP_FIMC_LITE1>,
-			 <&isp_clock CLK_ISP_PPMUISPX>,
-			 <&isp_clock CLK_ISP_PPMUISPMX>,
-			 <&isp_clock CLK_ISP_FIMC_ISP>,
-			 <&isp_clock CLK_ISP_FIMC_DRC>,
-			 <&isp_clock CLK_ISP_FIMC_FD>,
-			 <&isp_clock CLK_ISP_MCUISP>,
-			 <&isp_clock CLK_ISP_GICISP>,
-			 <&isp_clock CLK_ISP_MCUCTL_ISP>,
-			 <&isp_clock CLK_ISP_PWM_ISP>,
-			 <&isp_clock CLK_ISP_DIV_ISP0>,
-			 <&isp_clock CLK_ISP_DIV_ISP1>,
-			 <&isp_clock CLK_ISP_DIV_MCUISP0>,
-			 <&isp_clock CLK_ISP_DIV_MCUISP1>,
-			 <&clock CLK_MOUT_MPLL_USER_T>,
-			 <&clock CLK_ACLK200>,
-			 <&clock CLK_ACLK400_MCUISP>,
-			 <&clock CLK_DIV_ACLK200>,
-			 <&clock CLK_DIV_ACLK400_MCUISP>,
-			 <&clock CLK_UART_ISP_SCLK>;
-		clock-names = "lite0", "lite1", "ppmuispx",
-			      "ppmuispmx", "isp",
-			      "drc", "fd", "mcuisp",
-			      "gicisp", "mcuctl_isp", "pwm_isp",
-			      "ispdiv0", "ispdiv1", "mcuispdiv0",
-			      "mcuispdiv1", "mpll", "aclk200",
-			      "aclk400mcuisp", "div_aclk200",
-			      "div_aclk400mcuisp", "uart";
-		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
-			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
-		iommu-names = "isp", "drc", "fd", "mcuctl";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		status = "disabled";
-
-		pmu@10020000 {
-			reg = <0x10020000 0x3000>;
-		};
-
-		i2c1_isp: i2c-isp@12140000 {
-			compatible = "samsung,exynos4212-i2c-isp";
-			reg = <0x12140000 0x100>;
-			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
-			clock-names = "i2c_isp";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-&exynos_usbphy {
-	compatible = "samsung,exynos4x12-usb2-phy";
-	samsung,sysreg-phandle = <&sys_reg>;
-};
-
-&fimc_0 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_1 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_2 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-	samsung,cam-if;
-};
-
-&fimc_3 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <1920 8192 1366 1920>;
-	samsung,rotators = <0>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-};
-
-&gic {
-	cpu-offset = <0x4000>;
-};
-
-&gpu {
-	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "gp",
-			  "gpmmu",
-			  "pp0",
-			  "ppmmu0",
-			  "pp1",
-			  "ppmmu1",
-			  "pp2",
-			  "ppmmu2",
-			  "pp3",
-			  "ppmmu3",
-			  "pmu";
-	operating-points-v2 = <&gpu_opp_table>;
-
-	gpu_opp_table: opp_table {
-		compatible = "operating-points-v2";
-
-		opp-160000000 {
-			opp-hz = /bits/ 64 <160000000>;
-			opp-microvolt = <875000>;
-		};
-		opp-267000000 {
-			opp-hz = /bits/ 64 <267000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-350000000 {
-			opp-hz = /bits/ 64 <350000000>;
-			opp-microvolt = <950000>;
-		};
-		opp-440000000 {
-			opp-hz = /bits/ 64 <440000000>;
-			opp-microvolt = <1025000>;
-		};
-	};
-};
-
-&hdmi {
-	compatible = "samsung,exynos4212-hdmi";
-};
-
-&jpeg_codec {
-	compatible = "samsung,exynos4212-jpeg";
-};
-
-&rotator {
-	compatible = "samsung,exynos4212-rotator";
-};
-
-&mixer {
-	compatible = "samsung,exynos4212-mixer";
-	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
-	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
-};
-
-&pmu {
-	interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
-	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
-	status = "okay";
-};
-
-&pmu_system_controller {
-	compatible = "samsung,exynos4412-pmu", "syscon";
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
-	#clock-cells = <1>;
-};
-
-&tmu {
-	compatible = "samsung,exynos4412-tmu";
-	interrupt-parent = <&combiner>;
-	interrupts = <2 4>;
-	reg = <0x100C0000 0x100>;
-	clocks = <&clock 383>;
-	clock-names = "tmu_apbif";
-	status = "disabled";
-};
-
-#include "exynos4412-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
deleted file mode 100644
index 36a2b77eeb9d..000000000000
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SAMSUNG XYREF5260 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5260.dtsi"
-
-/ {
-	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
-	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
-
-	memory@20000000 {
-		device_type = "memory";
-		reg = <0x20000000 0x80000000>;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	xrtcxti: xrtcxti {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "xrtcxti";
-		#clock-cells = <0>;
-	};
-};
-
-&pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
-		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	broken-cd;
-	cap-mmc-highspeed;
-	supports-hs200-mode; /* 200 MHz */
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-};
-
-&mmc_2 {
-	status = "okay";
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	disable-wp;
-};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
deleted file mode 100644
index 3581b57fbbf7..000000000000
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ /dev/null
@@ -1,401 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SAMSUNG EXYNOS5260 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-#include <dt-bindings/clock/exynos5260-clk.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	compatible = "samsung,exynos5260", "samsung,exynos5";
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		i2c0 = &hsi2c_0;
-		i2c1 = &hsi2c_1;
-		i2c2 = &hsi2c_2;
-		i2c3 = &hsi2c_3;
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			cci-control-port = <&cci_control1>;
-		};
-
-		cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			cci-control-port = <&cci_control0>;
-		};
-
-		cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			cci-control-port = <&cci_control0>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		clock_top: clock-controller@10010000 {
-			compatible = "samsung,exynos5260-clock-top";
-			reg = <0x10010000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_peri: clock-controller@10200000 {
-			compatible = "samsung,exynos5260-clock-peri";
-			reg = <0x10200000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_egl: clock-controller@10600000 {
-			compatible = "samsung,exynos5260-clock-egl";
-			reg = <0x10600000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_kfc: clock-controller@10700000 {
-			compatible = "samsung,exynos5260-clock-kfc";
-			reg = <0x10700000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_g2d: clock-controller@10a00000 {
-			compatible = "samsung,exynos5260-clock-g2d";
-			reg = <0x10A00000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_mif: clock-controller@10ce0000 {
-			compatible = "samsung,exynos5260-clock-mif";
-			reg = <0x10CE0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_mfc: clock-controller@11090000 {
-			compatible = "samsung,exynos5260-clock-mfc";
-			reg = <0x11090000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_g3d: clock-controller@11830000 {
-			compatible = "samsung,exynos5260-clock-g3d";
-			reg = <0x11830000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_fsys: clock-controller@122e0000 {
-			compatible = "samsung,exynos5260-clock-fsys";
-			reg = <0x122E0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_aud: clock-controller@128c0000 {
-			compatible = "samsung,exynos5260-clock-aud";
-			reg = <0x128C0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_isp: clock-controller@133c0000 {
-			compatible = "samsung,exynos5260-clock-isp";
-			reg = <0x133C0000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_gscl: clock-controller@13f00000 {
-			compatible = "samsung,exynos5260-clock-gscl";
-			reg = <0x13F00000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		clock_disp: clock-controller@14550000 {
-			compatible = "samsung,exynos5260-clock-disp";
-			reg = <0x14550000 0x10000>;
-			#clock-cells = <1>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-				<0x10482000 0x2000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <GIC_PPI 9
-					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		chipid: chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		mct: mct@100b0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x100B0000 0x1000>;
-			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		cci: cci@10f00000 {
-			compatible = "arm,cci-400";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10F00000 0x1000>;
-			ranges = <0x0 0x10F00000 0x6000>;
-
-			cci_control0: slave-if@4000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x4000 0x1000>;
-			};
-
-			cci_control1: slave-if@5000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x5000 0x1000>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11600000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x11600000 0x1000>;
-			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_1: pinctrl@12290000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x12290000 0x1000>;
-			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_2: pinctrl@128b0000 {
-			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x128B0000 0x1000>;
-			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pmu_system_controller: system-controller@10d50000 {
-			compatible = "samsung,exynos5260-pmu", "syscon";
-			reg = <0x10D50000 0x10000>;
-		};
-
-		uart0: serial@12c00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart1: serial@12c10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart2: serial@12c20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		uart3: serial@12860000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12860000 0x100>;
-			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		mmc_0: mmc@12140000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12140000 0x2000>;
-			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			assigned-clocks =
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>,
-				<&clock_top TOP_SCLK_MMC0>;
-			assigned-clock-parents =
-				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>;
-			assigned-clock-rates = <0>, <0>, <800000000>;
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12150000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12150000 0x2000>;
-			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			assigned-clocks =
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>,
-				<&clock_top TOP_SCLK_MMC1>;
-			assigned-clock-parents =
-				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>;
-			assigned-clock-rates = <0>, <0>, <800000000>;
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12160000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12160000 0x2000>;
-			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			assigned-clocks =
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>,
-				<&clock_top TOP_SCLK_MMC2>;
-			assigned-clock-parents =
-				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
-				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>;
-			assigned-clock-rates = <0>, <0>, <800000000>;
-			fifo-depth = <64>;
-			status = "disabled";
-		};
-
-		hsi2c_0: hsi2c@12da0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DA0000 0x1000>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC0>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_1: hsi2c@12db0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DB0000 0x1000>;
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC1>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_2: hsi2c@12dc0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DC0000 0x1000>;
-			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC2>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_3: hsi2c@12dd0000 {
-			compatible = "samsung,exynos5260-hsi2c";
-			reg = <0x12DD0000 0x1000>;
-			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_hs_bus>;
-			clocks = <&clock_peri PERI_CLK_HSIC3>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-	};
-};
-
-#include "exynos5260-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
deleted file mode 100644
index dffa5e3ed90c..000000000000
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SAMSUNG SMDK5410 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5410.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-/ {
-	model = "Samsung SMDK5410 board based on EXYNOS5410";
-	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	firmware@2037000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02037000 0x1000>;
-	};
-
-};
-
-&mmc_0 {
-	status = "okay";
-	cap-mmc-highspeed;
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	bus-width = <8>;
-};
-
-&mmc_2 {
-	status = "okay";
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	bus-width = <4>;
-	disable-wp;
-};
-
-&pinctrl_0 {
-	srom_ctl: srom-ctl {
-		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
-			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	srom_ebi: srom-ebi {
-		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
-			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
-			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
-			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
-			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
-			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&sromc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
-
-	ethernet@3,0 {
-		compatible = "smsc,lan9115";
-		reg = <3 0 0x10000>;
-		phy-mode = "mii";
-		interrupt-parent = <&gpx0>;
-		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-		reg-io-width = <2>;
-		smsc,irq-push-pull;
-		smsc,force-internal-phy;
-
-		samsung,srom-page-mode;
-		samsung,srom-timing = <9 12 1 9 1 1>;
-	};
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
deleted file mode 100644
index 7d51e0f4ab79..000000000000
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ /dev/null
@@ -1,1559 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SAMSUNG EXYNOS5420 SoC device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS5420 SoC device nodes are listed in this file.
- * EXYNOS5420 based board files can include this file and provide
- * values for board specfic bindings.
- */
-
-#include "exynos54xx.dtsi"
-#include <dt-bindings/clock/exynos5420.h>
-#include <dt-bindings/clock/exynos-audss-clk.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
-	compatible = "samsung,exynos5420", "samsung,exynos5";
-
-	aliases {
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		pinctrl4 = &pinctrl_4;
-		i2c8 = &hsi2c_8;
-		i2c9 = &hsi2c_9;
-		i2c10 = &hsi2c_10;
-		gsc0 = &gsc_0;
-		gsc1 = &gsc_1;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-	};
-
-	/*
-	 * The 'cpus' node is not present here but instead it is provided
-	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
-	 */
-
-	cluster_a15_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1800000000 {
-			opp-hz = /bits/ 64 <1800000000>;
-			opp-microvolt = <1250000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1700000000 {
-			opp-hz = /bits/ 64 <1700000000>;
-			opp-microvolt = <1212500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1600000000 {
-			opp-hz = /bits/ 64 <1600000000>;
-			opp-microvolt = <1175000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1137500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1112500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1062500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1037500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1012500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = < 987500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = < 962500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = < 937500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = < 912500>;
-			clock-latency-ns = <140000>;
-		};
-	};
-
-	cluster_a7_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1275000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1212500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1162500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1112500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-900000000 {
-			opp-hz = /bits/ 64 <900000000>;
-			opp-microvolt = <1062500>;
-			clock-latency-ns = <140000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt = <1025000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-700000000 {
-			opp-hz = /bits/ 64 <700000000>;
-			opp-microvolt = <975000>;
-			clock-latency-ns = <140000>;
-		};
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt = <937500>;
-			clock-latency-ns = <140000>;
-		};
-	};
-
-	soc: soc {
-		cci: cci@10d20000 {
-			compatible = "arm,cci-400";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10d20000 0x1000>;
-			ranges = <0x0 0x10d20000 0x6000>;
-
-			cci_control0: slave-if@4000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x4000 0x1000>;
-			};
-			cci_control1: slave-if@5000 {
-				compatible = "arm,cci-400-ctrl-if";
-				interface-type = "ace";
-				reg = <0x5000 0x1000>;
-			};
-		};
-
-		clock: clock-controller@10010000 {
-			compatible = "samsung,exynos5420-clock";
-			reg = <0x10010000 0x30000>;
-			#clock-cells = <1>;
-		};
-
-		clock_audss: audss-clock-controller@3810000 {
-			compatible = "samsung,exynos5420-audss-clock";
-			reg = <0x03810000 0x0C>;
-			#clock-cells = <1>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
-				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
-			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-			power-domains = <&mau_pd>;
-		};
-
-		mfc: codec@11000000 {
-			compatible = "samsung,mfc-v7";
-			reg = <0x11000000 0x10000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MFC>;
-			clock-names = "mfc";
-			power-domains = <&mfc_pd>;
-			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-			iommu-names = "left", "right";
-		};
-
-		mmc_0: mmc@12200000 {
-			compatible = "samsung,exynos5420-dw-mshc-smu";
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12200000 0x2000>;
-			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x40>;
-			status = "disabled";
-		};
-
-		mmc_1: mmc@12210000 {
-			compatible = "samsung,exynos5420-dw-mshc-smu";
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12210000 0x2000>;
-			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x40>;
-			status = "disabled";
-		};
-
-		mmc_2: mmc@12220000 {
-			compatible = "samsung,exynos5420-dw-mshc";
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x12220000 0x1000>;
-			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x40>;
-			status = "disabled";
-		};
-
-		nocp_mem0_0: nocp@10ca1000 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1000 0x200>;
-			status = "disabled";
-		};
-
-		nocp_mem0_1: nocp@10ca1400 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1400 0x200>;
-			status = "disabled";
-		};
-
-		nocp_mem1_0: nocp@10ca1800 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1800 0x200>;
-			status = "disabled";
-		};
-
-		nocp_mem1_1: nocp@10ca1c00 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x10CA1C00 0x200>;
-			status = "disabled";
-		};
-
-		nocp_g3d_0: nocp@11a51000 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51000 0x200>;
-			status = "disabled";
-		};
-
-		nocp_g3d_1: nocp@11a51400 {
-			compatible = "samsung,exynos5420-nocp";
-			reg = <0x11A51400 0x200>;
-			status = "disabled";
-		};
-
-		gsc_pd: power-domain@10044000 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044000 0x20>;
-			#power-domain-cells = <0>;
-			label = "GSC";
-		};
-
-		isp_pd: power-domain@10044020 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044020 0x20>;
-			#power-domain-cells = <0>;
-			label = "ISP";
-		};
-
-		mfc_pd: power-domain@10044060 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044060 0x20>;
-			#power-domain-cells = <0>;
-			label = "MFC";
-		};
-
-		g3d_pd: power-domain@10044080 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044080 0x20>;
-			#power-domain-cells = <0>;
-			label = "G3D";
-		};
-
-		disp_pd: power-domain@100440c0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440C0 0x20>;
-			#power-domain-cells = <0>;
-			label = "DISP";
-		};
-
-		mau_pd: power-domain@100440e0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100440E0 0x20>;
-			#power-domain-cells = <0>;
-			label = "MAU";
-		};
-
-		msc_pd: power-domain@10044120 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10044120 0x20>;
-			#power-domain-cells = <0>;
-			label = "MSC";
-		};
-
-		pinctrl_0: pinctrl@13400000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x13400000 0x1000>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		pinctrl_1: pinctrl@13410000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x13410000 0x1000>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_2: pinctrl@14000000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x14000000 0x1000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_3: pinctrl@14010000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x14010000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		pinctrl_4: pinctrl@3860000 {
-			compatible = "samsung,exynos5420-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&mau_pd>;
-		};
-
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			interrupt-parent = <&gic>;
-			ranges;
-
-			adma: adma@3880000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x03880000 0x1000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock_audss EXYNOS_ADMA>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <6>;
-				#dma-requests = <16>;
-				power-domains = <&mau_pd>;
-			};
-
-			pdma0: pdma@121a0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121A0000 0x1000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@121b0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121B0000 0x1000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			mdma0: mdma@10800000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x10800000 0x1000>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_MDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <1>;
-			};
-
-			mdma1: mdma@11c10000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x11C10000 0x1000>;
-				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_MDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <1>;
-				/*
-				 * MDMA1 can support both secure and non-secure
-				 * AXI transactions. When this is enabled in
-				 * the kernel for boards that run in secure
-				 * mode, we are getting imprecise external
-				 * aborts causing the kernel to oops.
-				 */
-				status = "disabled";
-			};
-		};
-
-		i2s0: i2s@3830000 {
-			compatible = "samsung,exynos5420-i2s";
-			reg = <0x03830000 0x100>;
-			dmas = <&adma 0
-				&adma 2
-				&adma 1>;
-			dma-names = "tx", "rx", "tx-sec";
-			clocks = <&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk0";
-			#sound-dai-cells = <1>;
-			samsung,idma-addr = <0x03000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s0_bus>;
-			power-domains = <&mau_pd>;
-			status = "disabled";
-		};
-
-		i2s1: i2s@12d60000 {
-			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D60000 0x100>;
-			dmas = <&pdma1 12
-				&pdma1 11>;
-			dma-names = "tx", "rx";
-			clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
-			clock-names = "iis", "i2s_opclk0";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk1";
-			#sound-dai-cells = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s1_bus>;
-			status = "disabled";
-		};
-
-		i2s2: i2s@12d70000 {
-			compatible = "samsung,exynos5420-i2s";
-			reg = <0x12D70000 0x100>;
-			dmas = <&pdma0 12
-				&pdma0 11>;
-			dma-names = "tx", "rx";
-			clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
-			clock-names = "iis", "i2s_opclk0";
-			#clock-cells = <1>;
-			clock-output-names = "i2s_cdclk2";
-			#sound-dai-cells = <1>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s2_bus>;
-			status = "disabled";
-		};
-
-		spi_0: spi@12d20000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x12d20000 0x100>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 5
-				&pdma0 4>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			status = "disabled";
-		};
-
-		spi_1: spi@12d30000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x12d30000 0x100>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 5
-				&pdma1 4>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			status = "disabled";
-		};
-
-		spi_2: spi@12d40000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x12d40000 0x100>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7
-				&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_bus>;
-			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-			clock-names = "spi", "spi_busclk0";
-			status = "disabled";
-		};
-
-		dp_phy: dp-video-phy {
-			compatible = "samsung,exynos5420-dp-video-phy";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <0>;
-		};
-
-		mipi_phy: mipi-video-phy {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		dsi@14500000 {
-			compatible = "samsung,exynos5410-mipi-dsi";
-			reg = <0x14500000 0x10000>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&mipi_phy 1>;
-			phy-names = "dsim";
-			clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
-			clock-names = "bus_clk", "pll_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsi2c_8: i2c@12e00000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E00000 0x1000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c8_hs_bus>;
-			clocks = <&clock CLK_USI4>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_9: i2c@12e10000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E10000 0x1000>;
-			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c9_hs_bus>;
-			clocks = <&clock CLK_USI5>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_10: i2c@12e20000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12E20000 0x1000>;
-			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c10_hs_bus>;
-			clocks = <&clock CLK_USI6>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hdmi: hdmi@14530000 {
-			compatible = "samsung,exynos5420-hdmi";
-			reg = <0x14530000 0x70000>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-				 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-				 <&clock CLK_MOUT_HDMI>;
-			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "mout_hdmi";
-			phy = <&hdmiphy>;
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			status = "disabled";
-			power-domains = <&disp_pd>;
-			#sound-dai-cells = <0>;
-		};
-
-		hdmiphy: hdmiphy@145d0000 {
-			reg = <0x145D0000 0x20>;
-		};
-
-		hdmicec: cec@101b0000 {
-			compatible = "samsung,s5p-cec";
-			reg = <0x101B0000 0x200>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_HDMI_CEC>;
-			clock-names = "hdmicec";
-			samsung,syscon-phandle = <&pmu_system_controller>;
-			hdmi-phandle = <&hdmi>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdmi_cec>;
-			status = "disabled";
-		};
-
-		mixer: mixer@14450000 {
-			compatible = "samsung,exynos5420-mixer";
-			reg = <0x14450000 0x10000>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-				 <&clock CLK_SCLK_HDMI>;
-			clock-names = "mixer", "hdmi", "sclk_hdmi";
-			power-domains = <&disp_pd>;
-			iommus = <&sysmmu_tv>;
-			status = "disabled";
-		};
-
-		rotator: rotator@11c00000 {
-			compatible = "samsung,exynos5250-rotator";
-			reg = <0x11C00000 0x64>;
-			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_ROTATOR>;
-			clock-names = "rotator";
-			iommus = <&sysmmu_rotator>;
-		};
-
-		gsc_0: video-scaler@13e00000 {
-			compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc";
-			reg = <0x13e00000 0x1000>;
-			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_GSCL0>;
-			clock-names = "gscl";
-			power-domains = <&gsc_pd>;
-			iommus = <&sysmmu_gscl0>;
-		};
-
-		gsc_1: video-scaler@13e10000 {
-			compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc";
-			reg = <0x13e10000 0x1000>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_GSCL1>;
-			clock-names = "gscl";
-			power-domains = <&gsc_pd>;
-			iommus = <&sysmmu_gscl1>;
-		};
-
-		scaler_0: scaler@12800000 {
-			compatible = "samsung,exynos5420-scaler";
-			reg = <0x12800000 0x1294>;
-			interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MSCL0>;
-			clock-names = "mscl";
-			power-domains = <&msc_pd>;
-			iommus = <&sysmmu_scaler0r>, <&sysmmu_scaler0w>;
-		};
-
-		scaler_1: scaler@12810000 {
-			compatible = "samsung,exynos5420-scaler";
-			reg = <0x12810000 0x1294>;
-			interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MSCL1>;
-			clock-names = "mscl";
-			power-domains = <&msc_pd>;
-			iommus = <&sysmmu_scaler1r>, <&sysmmu_scaler1w>;
-		};
-
-		scaler_2: scaler@12820000 {
-			compatible = "samsung,exynos5420-scaler";
-			reg = <0x12820000 0x1294>;
-			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_MSCL2>;
-			clock-names = "mscl";
-			power-domains = <&msc_pd>;
-			iommus = <&sysmmu_scaler2r>, <&sysmmu_scaler2w>;
-		};
-
-		jpeg_0: jpeg@11f50000 {
-			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F50000 0x1000>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "jpeg";
-			clocks = <&clock CLK_JPEG>;
-			iommus = <&sysmmu_jpeg0>;
-		};
-
-		jpeg_1: jpeg@11f60000 {
-			compatible = "samsung,exynos5420-jpeg";
-			reg = <0x11F60000 0x1000>;
-			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "jpeg";
-			clocks = <&clock CLK_JPEG2>;
-			iommus = <&sysmmu_jpeg1>;
-		};
-
-		pmu_system_controller: system-controller@10040000 {
-			compatible = "samsung,exynos5420-pmu", "syscon";
-			reg = <0x10040000 0x5000>;
-			clock-names = "clkout16";
-			clocks = <&clock CLK_FIN_PLL>;
-			#clock-cells = <1>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupt-parent = <&gic>;
-		};
-
-		tmu_cpu0: tmu@10060000 {
-			compatible = "samsung,exynos5420-tmu";
-			reg = <0x10060000 0x100>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		tmu_cpu1: tmu@10064000 {
-			compatible = "samsung,exynos5420-tmu";
-			reg = <0x10064000 0x100>;
-			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>;
-			clock-names = "tmu_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		tmu_cpu2: tmu@10068000 {
-			compatible = "samsung,exynos5420-tmu-ext-triminfo";
-			reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
-			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		tmu_cpu3: tmu@1006c000 {
-			compatible = "samsung,exynos5420-tmu-ext-triminfo";
-			reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
-			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		tmu_gpu: tmu@100a0000 {
-			compatible = "samsung,exynos5420-tmu-ext-triminfo";
-			reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
-			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-			#thermal-sensor-cells = <0>;
-		};
-
-		sysmmu_g2dr: sysmmu@10a60000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A60000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <24 5>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_g2dw: sysmmu@10a70000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x10A70000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <22 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_tv: sysmmu@14650000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14650000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <7 4>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
-			power-domains = <&disp_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gscl0: sysmmu@13e80000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E80000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-			power-domains = <&gsc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_gscl1: sysmmu@13e90000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x13E90000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <2 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-			power-domains = <&gsc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler0r: sysmmu@12880000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12880000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <22 4>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler1r: sysmmu@12890000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x12890000 0x1000>;
-			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler2r: sysmmu@128a0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128A0000 0x1000>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler0w: sysmmu@128c0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128C0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <27 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler1w: sysmmu@128d0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128D0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <22 6>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_scaler2w: sysmmu@128e0000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x128E0000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <19 6>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-			power-domains = <&msc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_rotator: sysmmu@11d40000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11D40000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_jpeg0: sysmmu@11f10000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F10000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <4 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_jpeg1: sysmmu@11f20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11F20000 0x1000>;
-			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_mfc_l: sysmmu@11200000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11200000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <6 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-			power-domains = <&mfc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_mfc_r: sysmmu@11210000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11210000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <8 5>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-			power-domains = <&mfc_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimd1_0: sysmmu@14640000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14640000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 2>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
-			power-domains = <&disp_pd>;
-			#iommu-cells = <0>;
-		};
-
-		sysmmu_fimd1_1: sysmmu@14680000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x14680000 0x1000>;
-			interrupt-parent = <&combiner>;
-			interrupts = <3 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
-			power-domains = <&disp_pd>;
-			#iommu-cells = <0>;
-		};
-
-		bus_wcore: bus_wcore {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_wcore_opp_table>;
-			status = "disabled";
-		};
-
-		bus_noc: bus_noc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK100_NOC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_noc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys_apb: bus_fsys_apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_apb_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys: bus_fsys {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys_apb_opp_table>;
-			status = "disabled";
-		};
-
-		bus_fsys2: bus_fsys2 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_fsys2_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mfc: bus_mfc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_mfc_opp_table>;
-			status = "disabled";
-		};
-
-		bus_gen: bus_gen {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_gen_opp_table>;
-			status = "disabled";
-		};
-
-		bus_peri: bus_peri {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK66>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_peri_opp_table>;
-			status = "disabled";
-		};
-
-		bus_g2d: bus_g2d {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK333_G2D>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_g2d_opp_table>;
-			status = "disabled";
-		};
-
-		bus_g2d_acp: bus_g2d_acp {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK266_G2D>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_g2d_acp_opp_table>;
-			status = "disabled";
-		};
-
-		bus_jpeg: bus_jpeg {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_jpeg_opp_table>;
-			status = "disabled";
-		};
-
-		bus_jpeg_apb: bus_jpeg_apb {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK166>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_jpeg_apb_opp_table>;
-			status = "disabled";
-		};
-
-		bus_disp1_fimd: bus_disp1_fimd {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_disp1_fimd_opp_table>;
-			status = "disabled";
-		};
-
-		bus_disp1: bus_disp1 {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_disp1_opp_table>;
-			status = "disabled";
-		};
-
-		bus_gscl_scaler: bus_gscl_scaler {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_gscl_opp_table>;
-			status = "disabled";
-		};
-
-		bus_mscl: bus_mscl {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_mscl_opp_table>;
-			status = "disabled";
-		};
-
-		bus_wcore_opp_table: opp_table2 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-				opp-microvolt = <925000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-				opp-microvolt = <950000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-				opp-microvolt = <950000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <333000000>;
-				opp-microvolt = <950000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <400000000>;
-				opp-microvolt = <987500>;
-			};
-		};
-
-		bus_noc_opp_table: opp_table3 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <86000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-		};
-
-		bus_fsys_apb_opp_table: opp_table4 {
-			compatible = "operating-points-v2";
-			opp-shared;
-
-			opp00 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_fsys2_opp_table: opp_table5 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <100000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-		};
-
-		bus_mfc_opp_table: opp_table6 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <96000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-		};
-
-		bus_gen_opp_table: opp_table7 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <89000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <133000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <178000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_peri_opp_table: opp_table8 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-		};
-
-		bus_g2d_opp_table: opp_table9 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-		};
-
-		bus_g2d_acp_opp_table: opp_table10 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <67000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <133000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <178000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <267000000>;
-			};
-		};
-
-		bus_jpeg_opp_table: opp_table11 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <75000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_jpeg_apb_opp_table: opp_table12 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <111000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <134000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-		};
-
-		bus_disp1_fimd_opp_table: opp_table13 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <120000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-		};
-
-		bus_disp1_opp_table: opp_table14 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <120000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_gscl_opp_table: opp_table15 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <150000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <200000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <300000000>;
-			};
-		};
-
-		bus_mscl_opp_table: opp_table16 {
-			compatible = "operating-points-v2";
-
-			opp00 {
-				opp-hz = /bits/ 64 <84000000>;
-			};
-			opp01 {
-				opp-hz = /bits/ 64 <167000000>;
-			};
-			opp02 {
-				opp-hz = /bits/ 64 <222000000>;
-			};
-			opp03 {
-				opp-hz = /bits/ 64 <333000000>;
-			};
-			opp04 {
-				opp-hz = /bits/ 64 <400000000>;
-			};
-		};
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-		cpu1_thermal: cpu1-thermal {
-		       thermal-sensors = <&tmu_cpu1>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-		cpu2_thermal: cpu2-thermal {
-		       thermal-sensors = <&tmu_cpu2>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-		cpu3_thermal: cpu3-thermal {
-		       thermal-sensors = <&tmu_cpu3>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-		gpu_thermal: gpu-thermal {
-		       thermal-sensors = <&tmu_gpu>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-	};
-};
-
-&adc {
-	clocks = <&clock CLK_TSADC>;
-	clock-names = "adc";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-&dp {
-	clocks = <&clock CLK_DP1>;
-	clock-names = "dp";
-	phys = <&dp_phy>;
-	phy-names = "dp";
-	power-domains = <&disp_pd>;
-};
-
-&fimd {
-	compatible = "samsung,exynos5420-fimd";
-	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
-	clock-names = "sclk_fimd", "fimd";
-	power-domains = <&disp_pd>;
-	iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>;
-	iommu-names = "m0", "m1";
-};
-
-&g2d {
-	iommus = <&sysmmu_g2dr>, <&sysmmu_g2dw>;
-	clocks = <&clock CLK_G2D>;
-	clock-names = "fimg2d";
-	status = "okay";
-};
-
-&i2c_0 {
-	clocks = <&clock CLK_I2C0>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_bus>;
-};
-
-&i2c_1 {
-	clocks = <&clock CLK_I2C1>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_bus>;
-};
-
-&i2c_2 {
-	clocks = <&clock CLK_I2C2>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_bus>;
-};
-
-&i2c_3 {
-	clocks = <&clock CLK_I2C3>;
-	clock-names = "i2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_bus>;
-};
-
-&hsi2c_4 {
-	clocks = <&clock CLK_USI0>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_hs_bus>;
-};
-
-&hsi2c_5 {
-	clocks = <&clock CLK_USI1>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_hs_bus>;
-};
-
-&hsi2c_6 {
-	clocks = <&clock CLK_USI2>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c6_hs_bus>;
-};
-
-&hsi2c_7 {
-	clocks = <&clock CLK_USI3>;
-	clock-names = "hsi2c";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c7_hs_bus>;
-};
-
-&mct {
-	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-	clock-names = "fin_pll", "mct";
-};
-
-&prng {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&pwm {
-	clocks = <&clock CLK_PWM>;
-	clock-names = "timers";
-};
-
-&rtc {
-	clocks = <&clock CLK_RTC>;
-	clock-names = "rtc";
-	interrupt-parent = <&pmu_system_controller>;
-	status = "disabled";
-};
-
-&serial_0 {
-	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 13>, <&pdma0 14>;
-	dma-names = "rx", "tx";
-};
-
-&serial_1 {
-	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 15>, <&pdma1 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_2 {
-	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma0 15>, <&pdma0 16>;
-	dma-names = "rx", "tx";
-};
-
-&serial_3 {
-	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-	clock-names = "uart", "clk_uart_baud0";
-	dmas = <&pdma1 17>, <&pdma1 18>;
-	dma-names = "rx", "tx";
-};
-
-&sss {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&trng {
-	clocks = <&clock CLK_SSS>;
-	clock-names = "secss";
-};
-
-&usbdrd3_0 {
-	clocks = <&clock CLK_USBD300>;
-	clock-names = "usbdrd30";
-};
-
-&usbdrd_phy0 {
-	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-	clock-names = "phy", "ref";
-	samsung,pmu-syscon = <&pmu_system_controller>;
-};
-
-&usbdrd3_1 {
-	clocks = <&clock CLK_USBD301>;
-	clock-names = "usbdrd30";
-};
-
-&usbdrd_dwc3_1 {
-	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&usbdrd_phy1 {
-	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-	clock-names = "phy", "ref";
-	samsung,pmu-syscon = <&pmu_system_controller>;
-};
-
-&usbhost1 {
-	clocks = <&clock CLK_USBH20>;
-	clock-names = "usbhost";
-};
-
-&usbhost2 {
-	clocks = <&clock CLK_USBH20>;
-	clock-names = "usbhost";
-};
-
-&usb2_phy {
-	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-	clock-names = "phy", "ref";
-	samsung,sysreg-phandle = <&sysreg_system_controller>;
-	samsung,pmureg-phandle = <&pmu_system_controller>;
-};
-
-&watchdog {
-	clocks = <&clock CLK_WDT>;
-	clock-names = "watchdog";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-};
-
-#include "exynos5420-pinctrl.dtsi"
-#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
deleted file mode 100644
index 829147e320e0..000000000000
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ /dev/null
@@ -1,677 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU3/XU3-Lite/XU4/HC1 boards core device tree source
- *
- * Copyright (c) 2017 Marek Szyprowski
- * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "exynos5800.dtsi"
-#include "exynos5422-cpus.dtsi"
-
-/ {
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x7EA00000>;
-	};
-
-	chosen {
-		stdout-path = "serial2:115200n8";
-	};
-
-	firmware@2073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo4_reg>;
-	status = "okay";
-};
-
-&bus_wcore {
-	devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
-			<&nocp_mem1_0>, <&nocp_mem1_1>;
-	vdd-supply = <&buck3_reg>;
-	exynos,saturation-ratio = <100>;
-	status = "okay";
-};
-
-&bus_noc {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_fsys_apb {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_fsys {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_fsys2 {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_mfc {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_gen {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_peri {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_g2d {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_g2d_acp {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_jpeg {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_jpeg_apb {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_disp1_fimd {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_disp1 {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_gscl_scaler {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&bus_mscl {
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
-&cpu0 {
-	cpu-supply = <&buck6_reg>;
-};
-
-&cpu4 {
-	cpu-supply = <&buck2_reg>;
-};
-
-&hsi2c_4 {
-	status = "okay";
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-		samsung,s2mps11-acokb-ground;
-
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s2mps11_irq>;
-
-		s2mps11_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "s2mps11_ap",
-					"s2mps11_cp", "s2mps11_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "vdd_ldo1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "vdd_ldo2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "vddq_mmc0";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo4_reg: LDO4 {
-				regulator-name = "vdd_adc";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "vdd_ldo5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "vdd_ldo6";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "vdd_ldo7";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "vdd_ldo8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "vdd_ldo9";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "vdd_ldo10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo12_reg: LDO12 {
-				/* Unused */
-				regulator-name = "vdd_ldo12";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2375000>;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "vddq_mmc2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo14_reg: LDO14 {
-				/* Unused */
-				regulator-name = "vdd_ldo14";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "vdd_ldo15";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo16_reg: LDO16 {
-				/* Unused */
-				regulator-name = "vdd_ldo16";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "vdd_ldo17";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo18_reg: LDO18 {
-				regulator-name = "vdd_emmc_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "vdd_sd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo20_reg: LDO20 {
-				/* Unused */
-				regulator-name = "vdd_ldo20";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo21_reg: LDO21 {
-				/* Unused */
-				regulator-name = "vdd_ldo21";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo22_reg: LDO22 {
-				/* Unused */
-				regulator-name = "vdd_ldo22";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2375000>;
-			};
-
-			ldo23_reg: LDO23 {
-				regulator-name = "vdd_mifs";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo24_reg: LDO24 {
-				/* Unused */
-				regulator-name = "vdd_ldo24";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo25_reg: LDO25 {
-				/* Unused */
-				regulator-name = "vdd_ldo25";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo26_reg: LDO26 {
-				/* Used on XU3, XU3-Lite and XU4 */
-				regulator-name = "vdd_ldo26";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo27_reg: LDO27 {
-				regulator-name = "vdd_g3ds";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo28_reg: LDO28 {
-				/* Used on XU3 */
-				regulator-name = "vdd_ldo28";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo29_reg: LDO29 {
-				/* Unused */
-				regulator-name = "vdd_ldo29";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo30_reg: LDO30 {
-				/* Unused */
-				regulator-name = "vdd_ldo30";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo31_reg: LDO31 {
-				/* Unused */
-				regulator-name = "vdd_ldo31";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo32_reg: LDO32 {
-				/* Unused */
-				regulator-name = "vdd_ldo32";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo33_reg: LDO33 {
-				/* Unused */
-				regulator-name = "vdd_ldo33";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo34_reg: LDO34 {
-				/* Unused */
-				regulator-name = "vdd_ldo34";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo35_reg: LDO35 {
-				/* Unused */
-				regulator-name = "vdd_ldo35";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2375000>;
-			};
-
-			ldo36_reg: LDO36 {
-				/* Unused */
-				regulator-name = "vdd_ldo36";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo37_reg: LDO37 {
-				/* Unused */
-				regulator-name = "vdd_ldo37";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			ldo38_reg: LDO38 {
-				/* Unused */
-				regulator-name = "vdd_ldo38";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3950000>;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "vdd_mem";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "vdd_kfc";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "vdd_1.35v_ldo";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "vdd_2.0v_ldo";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2100000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "vdd_2.8v_ldo";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3750000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "vdd_vmem";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-		};
-	};
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	max-frequency = <200000000>;
-	vmmc-supply = <&ldo19_reg>;
-	vqmmc-supply = <&ldo13_reg>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	sd-uhs-ddr50;
-};
-
-&nocp_mem0_0 {
-	status = "okay";
-};
-
-&nocp_mem0_1 {
-	status = "okay";
-};
-
-&nocp_mem1_0 {
-	status = "okay";
-};
-
-&nocp_mem1_1 {
-	status = "okay";
-};
-
-&pinctrl_0 {
-	s2mps11_irq: s2mps11-irq {
-		samsung,pins = "gpx0-4";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-};
-
-&tmu_cpu0 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu1 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu2 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu3 {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_gpu {
-	vtmu-supply = <&ldo7_reg>;
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "host";
-};
-
-/* usbdrd_dwc3_1 mode customized in each board */
-
-&usbdrd3_0 {
-	vdd33-supply = <&ldo9_reg>;
-	vdd10-supply = <&ldo11_reg>;
-};
-
-&usbdrd3_1 {
-	vdd33-supply = <&ldo9_reg>;
-	vdd10-supply = <&ldo11_reg>;
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
deleted file mode 100644
index d271e7548826..000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts
+++ /dev/null
@@ -1,234 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid HC1 board device tree source
- *
- * Copyright (c) 2017 Marek Szyprowski
- * Copyright (c) 2017 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5422-odroid-core.dtsi"
-
-/ {
-	model = "Hardkernel Odroid HC1";
-	compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \
-		     "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0 0>;
-			trips {
-				cpu0_alert0: cpu-alert-0 {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <10000>; /* millicelsius */
-					type = "active";
-				};
-				cpu0_alert1: cpu-alert-1 {
-					temperature = <85000>; /* millicelsius */
-					hysteresis = <10000>; /* millicelsius */
-					type = "active";
-				};
-				cpu0_crit0: cpu-crit-0 {
-					temperature = <120000>; /* millicelsius */
-					hysteresis = <0>; /* millicelsius */
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				/*
-				 * When reaching cpu0_alert0, reduce CPU
-				 * by 2 steps. On Exynos5422/5800 that would
-				 * be: 1600 MHz and 1100 MHz.
-				 */
-				map0 {
-					trip = <&cpu0_alert0>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				/*
-				 * When reaching cpu0_alert1, reduce CPU
-				 * further, down to 600 MHz (12 steps for big,
-				 * 7 steps for LITTLE).
-				 */
-				map1 {
-					trip = <&cpu0_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
-				};
-			};
-		};
-		cpu1_thermal: cpu1-thermal {
-			thermal-sensors = <&tmu_cpu1 0>;
-			trips {
-				cpu1_alert0: cpu-alert-0 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu1_alert1: cpu-alert-1 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu1_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu1_alert0>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				map1 {
-					trip = <&cpu1_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
-				};
-			};
-		};
-		cpu2_thermal: cpu2-thermal {
-			thermal-sensors = <&tmu_cpu2 0>;
-			trips {
-				cpu2_alert0: cpu-alert-0 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu2_alert1: cpu-alert-1 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu2_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu2_alert0>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				map1 {
-					trip = <&cpu2_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
-				};
-			};
-		};
-		cpu3_thermal: cpu3-thermal {
-			thermal-sensors = <&tmu_cpu3 0>;
-			trips {
-				cpu3_alert0: cpu-alert-0 {
-					temperature = <70000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu3_alert1: cpu-alert-1 {
-					temperature = <85000>;
-					hysteresis = <10000>;
-					type = "active";
-				};
-				cpu3_crit0: cpu-crit-0 {
-					temperature = <120000>;
-					hysteresis = <0>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu3_alert0>;
-					cooling-device = <&cpu0 0 2>,
-							 <&cpu1 0 2>,
-							 <&cpu2 0 2>,
-							 <&cpu3 0 2>,
-							 <&cpu4 0 2>,
-							 <&cpu5 0 2>,
-							 <&cpu6 0 2>,
-							 <&cpu7 0 2>;
-				};
-				map1 {
-					trip = <&cpu3_alert1>;
-					cooling-device = <&cpu0 3 7>,
-							 <&cpu1 3 7>,
-							 <&cpu2 3 7>,
-							 <&cpu3 3 7>,
-							 <&cpu4 3 12>,
-							 <&cpu5 3 12>,
-							 <&cpu6 3 12>,
-							 <&cpu7 3 12>;
-				};
-			};
-		};
-	};
-
-};
-
-&pwm {
-	/*
-	 * PWM 2 -- Blue LED
-	 */
-	pinctrl-0 = <&pwm2_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <2>;
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
deleted file mode 100644
index c3c2d85267da..000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU3 audio subsystem device tree source
- *
- * Copyright (c) 2015 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-#include <dt-bindings/sound/samsung-i2s.h>
-
-/ {
-	sound: sound {
-		compatible = "samsung,odroid-xu3-audio";
-		model = "Odroid-XU3";
-
-		samsung,audio-widgets =
-			"Headphone", "Headphone Jack",
-			"Speakers", "Speakers";
-		samsung,audio-routing =
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Headphone Jack", "MICBIAS",
-			"IN12", "Headphone Jack",
-			"Speakers", "SPKL",
-			"Speakers", "SPKR",
-			"I2S Playback", "Mixer DAI TX",
-			"HiFi Playback", "Mixer DAI TX",
-			"Mixer DAI RX", "HiFi Capture";
-
-		assigned-clocks = <&clock CLK_MOUT_EPLL>,
-				<&clock CLK_MOUT_MAU_EPLL>,
-				<&clock CLK_MOUT_USER_MAU_EPLL>,
-				<&clock_audss EXYNOS_MOUT_AUDSS>,
-				<&clock_audss EXYNOS_MOUT_I2S>,
-				<&clock_audss EXYNOS_DOUT_SRP>,
-				<&clock_audss EXYNOS_DOUT_AUD_BUS>,
-				<&clock_audss EXYNOS_DOUT_I2S>;
-
-		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
-				<&clock CLK_MOUT_EPLL>,
-				<&clock CLK_MOUT_MAU_EPLL>,
-				<&clock CLK_MAU_EPLL>,
-				<&clock_audss EXYNOS_MOUT_AUDSS>;
-
-		assigned-clock-rates = <0>,
-				<0>,
-				<0>,
-				<0>,
-				<0>,
-				<196608001>,
-				<(196608002 / 2)>,
-				<196608000>;
-
-		cpu {
-			sound-dai = <&i2s0 0>, <&i2s0 1>;
-		};
-		codec {
-			sound-dai = <&hdmi>, <&max98090>;
-		};
-	};
-};
-
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_DOUT_SRP>,
-			  <&clock CLK_FOUT_EPLL>;
-	assigned-clock-rates = <(196608000 / 256)>,
-			       <196608000>;
-};
-
-&hsi2c_5 {
-	status = "okay";
-	max98090: max98090@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
-		clocks = <&i2s0 CLK_I2S_CDCLK>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
-	assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>;
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
deleted file mode 100644
index c19b5a51ca44..000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU3-Lite board device tree source
- *
- * Copyright (c) 2015 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include "exynos5422-odroidxu3-common.dtsi"
-#include "exynos5422-odroidxu3-audio.dtsi"
-#include "exynos54xx-odroidxu-leds.dtsi"
-
-/ {
-	model = "Hardkernel Odroid XU3 Lite";
-	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
-};
-
-&arm_a7_pmu {
-	status = "disabled";
-};
-
-&arm_a15_pmu {
-	status = "disabled";
-};
-
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 1 -- Green LED
-	 * PWM 2 -- Blue LED
-	 * PWM 3 -- on MIPI connector for backlight
-	 */
-	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "peripheral";
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
deleted file mode 100644
index 892d389d6d09..000000000000
--- a/arch/arm/boot/dts/exynos5422-odroidxu4.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU4 board device tree source
- *
- * Copyright (c) 2015 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-/dts-v1/;
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos5422-odroidxu3-common.dtsi"
-
-/ {
-	model = "Hardkernel Odroid XU4";
-	compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \
-		     "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound: sound {
-		compatible = "samsung,odroid-xu3-audio";
-		model = "Odroid-XU4";
-
-		samsung,audio-routing = "I2S Playback", "Mixer DAI TX";
-
-		assigned-clocks = <&clock CLK_MOUT_EPLL>,
-				<&clock CLK_MOUT_MAU_EPLL>,
-				<&clock CLK_MOUT_USER_MAU_EPLL>,
-				<&clock_audss EXYNOS_MOUT_AUDSS>,
-				<&clock_audss EXYNOS_MOUT_I2S>,
-				<&clock_audss EXYNOS_DOUT_SRP>,
-				<&clock_audss EXYNOS_DOUT_AUD_BUS>,
-				<&clock_audss EXYNOS_DOUT_I2S>;
-
-		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
-				<&clock CLK_MOUT_EPLL>,
-				<&clock CLK_MOUT_MAU_EPLL>,
-				<&clock CLK_MAU_EPLL>,
-				<&clock_audss EXYNOS_MOUT_AUDSS>;
-
-		assigned-clock-rates = <0>,
-				<0>,
-				<0>,
-				<0>,
-				<0>,
-				<196608001>,
-				<(196608002 / 2)>,
-				<196608000>;
-
-		cpu {
-			sound-dai = <&i2s0 0>, <&i2s0 1>;
-		};
-
-		codec {
-			sound-dai = <&hdmi>;
-		};
-	};
-};
-
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_DOUT_SRP>,
-			  <&clock CLK_FOUT_EPLL>;
-	assigned-clock-rates = <(196608000 / 256)>,
-			       <196608000>;
-};
-
-&i2s0 {
-	status = "okay";
-	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
-	assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>;
-};
-
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 2 -- Blue LED
-	 */
-	pinctrl-0 = <&pwm0_out &pwm2_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>, <2>;
-	status = "okay";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
deleted file mode 100644
index 56acd832f0b3..000000000000
--- a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
+++ /dev/null
@@ -1,47 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Hardkernel Odroid XU/XU3 LED device tree source
- *
- * Copyright (c) 2015,2016 Krzysztof Kozlowski
- * Copyright (c) 2014 Collabora Ltd.
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
deleted file mode 100644
index 9c3b63b7cac6..000000000000
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Samsung's Exynos54xx SoC series common device tree source
- *
- * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- * Copyright (c) 2016 Krzysztof Kozlowski
- *
- * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific
- * Exynos 54xx SoCs should include this file and customize it further
- * (e.g. with clocks).
- */
-
-#include "exynos5.dtsi"
-
-/ {
-	compatible = "samsung,exynos5";
-
-	aliases {
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
-		usbdrdphy0 = &usbdrd_phy0;
-		usbdrdphy1 = &usbdrd_phy1;
-	};
-
-	arm_a7_pmu: arm-a7-pmu {
-		compatible = "arm,cortex-a7-pmu";
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-	};
-
-	arm_a15_pmu: arm-a15-pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <1 2>,
-			     <7 0>,
-			     <16 6>,
-			     <19 2>;
-		status = "disabled";
-	};
-
-	soc: soc {
-		sysram@2020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
-		};
-
-		mct: mct@101c0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101c0000 0xb00>;
-			interrupt-parent = <&mct_map>;
-			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
-					<8>, <9>, <10>, <11>;
-
-			mct_map: mct-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &combiner 23 3>,
-						<1 &combiner 23 4>,
-						<2 &combiner 25 2>,
-						<3 &combiner 25 3>,
-						<4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
-						<5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>,
-						<6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>,
-						<7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>,
-						<8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>,
-						<9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>,
-						<10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>,
-						<11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		watchdog: watchdog@101d0000 {
-			compatible = "samsung,exynos5420-wdt";
-			reg = <0x101d0000 0x100>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		adc: adc@12d10000 {
-			compatible = "samsung,exynos-adc-v2";
-			reg = <0x12d10000 0x100>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			#io-channel-cells = <1>;
-			io-channel-ranges;
-			status = "disabled";
-		};
-
-		/* i2c_0-3 are defined in exynos5.dtsi */
-		hsi2c_4: i2c@12ca0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12ca0000 0x1000>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsi2c_5: i2c@12cb0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12cb0000 0x1000>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsi2c_6: i2c@12cc0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12cc0000 0x1000>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		hsi2c_7: i2c@12cd0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12cd0000 0x1000>;
-			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usbdrd3_0: usb3-0 {
-			compatible = "samsung,exynos5250-dwusb3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_0: dwc3@12000000 {
-				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		usbdrd_phy0: phy@12100000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12100000 0x100>;
-			#phy-cells = <1>;
-		};
-
-		usbdrd3_1: usb3-1 {
-			compatible = "samsung,exynos5250-dwusb3";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_1: dwc3@12400000 {
-				compatible = "snps,dwc3";
-				reg = <0x12400000 0x10000>;
-				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		usbdrd_phy1: phy@12500000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12500000 0x100>;
-			#phy-cells = <1>;
-		};
-
-		usbhost2: usb@12110000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12110000 0x100>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb2_phy 1>;
-			phy-names = "host";
-		};
-
-		usbhost1: usb@12120000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12120000 0x100>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb2_phy 1>;
-			phy-names = "host";
-		};
-
-		usb2_phy: phy@12130000 {
-			compatible = "samsung,exynos5250-usb2-phy";
-			reg = <0x12130000 0x100>;
-			#phy-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
deleted file mode 100644
index de639eecc5c9..000000000000
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ /dev/null
@@ -1,142 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SAMSUNG EXYNOS5800 SoC device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file.
- * EXYNOS5800 based board files can include this file and provide
- * values for board specfic bindings.
- */
-
-#include "exynos5420.dtsi"
-
-/ {
-	compatible = "samsung,exynos5800", "samsung,exynos5";
-};
-
-&clock {
-	compatible = "samsung,exynos5800-clock";
-};
-
-&cluster_a15_opp_table {
-	opp-1700000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1600000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1500000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-1400000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-1300000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-1200000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-1100000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-1000000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-900000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-800000000 {
-		opp-microvolt = <900000>;
-	};
-	opp-700000000 {
-		opp-microvolt = <900000>;
-	};
-	opp-600000000 {
-		opp-hz = /bits/ 64 <600000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-500000000 {
-		opp-hz = /bits/ 64 <500000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-400000000 {
-		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-300000000 {
-		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-200000000 {
-		opp-hz = /bits/ 64 <200000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-};
-
-&cluster_a7_opp_table {
-	opp-1300000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1200000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1100000000 {
-		opp-microvolt = <1250000>;
-	};
-	opp-1000000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-900000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-800000000 {
-		opp-microvolt = <1100000>;
-	};
-	opp-700000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-600000000 {
-		opp-microvolt = <1000000>;
-	};
-	opp-500000000 {
-		opp-hz = /bits/ 64 <500000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-400000000 {
-		opp-hz = /bits/ 64 <400000000>;
-		opp-microvolt = <1000000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-300000000 {
-		opp-hz = /bits/ 64 <300000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-	opp-200000000 {
-		opp-hz = /bits/ 64 <200000000>;
-		opp-microvolt = <900000>;
-		clock-latency-ns = <140000>;
-	};
-};
-
-&mfc {
-	compatible = "samsung,mfc-v8";
-};
-
-&soc {
-	cam_pd: power-domain@10045100 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10045100 0x20>;
-		#power-domain-cells = <0>;
-		label = "CAM";
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
deleted file mode 100644
index 3a2761dd460f..000000000000
--- a/arch/arm/boot/dts/gemini-wbd111.dts
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Wiliboard WBD-111
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Wiliboard WBD-111";
-	compatible = "wiliboard,wbd111", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 {
-		/* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-setup {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "reset";
-			/* Conflict with ICE */
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-red-l3 {
-			label = "wbd111:red:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-green-l4 {
-			label = "wbd111:green:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-red-l4 {
-			label = "wbd111:red:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-greeb-l3 {
-			label = "wbd111:green:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	mdio0: ethernet-phy {
-		compatible = "virtual,mdio-gpio";
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-			device_type = "ethernet-phy";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 8MB of flash */
-			reg = <0x30000000 0x00800000>;
-
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00020000>;
-				read-only;
-			};
-			partition@20000 {
-				label = "kernel";
-				reg = <0x00020000 0x00100000>;
-			};
-			partition@120000 {
-				label = "rootfs";
-				reg = <0x00120000 0x006a0000>;
-			};
-			partition@7c0000 {
-				label = "VCTL";
-				reg = <0x007c0000 0x00010000>;
-				read-only;
-			};
-			partition@7d0000 {
-				label = "cfg";
-				reg = <0x007d0000 0x00010000>;
-				read-only;
-			};
-			partition@7e0000 {
-				label = "FIS";
-				reg = <0x007e0000 0x00010000>;
-				read-only;
-			};
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 * gpio0agrp cover line 0-4
-				 * gpio0bgrp cover line 5
-				 */
-				gpio0_default_pins: pinctrl-gpio0 {
-					mux {
-						function = "gpio0";
-						groups = "gpio0agrp",
-						"gpio0bgrp";
-					};
-				};
-			};
-		};
-
-		gpio0: gpio@4d000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_default_pins>;
-		};
-
-		pci@50000000 {
-			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
-		usb@68000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
deleted file mode 100644
index 52b4dbc0c072..000000000000
--- a/arch/arm/boot/dts/gemini-wbd222.dts
+++ /dev/null
@@ -1,195 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device Tree file for Wiliboard WBD-222
- */
-
-/dts-v1/;
-
-#include "gemini.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Wiliboard WBD-222";
-	compatible = "wiliboard,wbd222", "cortina,gemini";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory@0 { /* 128 MB */
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
-		stdout-path = &uart0;
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-
-		button-setup {
-			debounce-interval = <100>;
-			wakeup-source;
-			linux,code = <KEY_SETUP>;
-			label = "reset";
-			/* Conflict with ICE */
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-red-l3 {
-			label = "wbd111:red:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-green-l4 {
-			label = "wbd111:green:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-red-l4 {
-			label = "wbd111:red:L4";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-		led-green-l3 {
-			label = "wbd111:green:L3";
-			/* Conflict with TVC and extended parallel flash */
-			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	mdio0: ethernet-phy {
-		compatible = "virtual,mdio-gpio";
-		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
-			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-			device_type = "ethernet-phy";
-		};
-
-		phy1: ethernet-phy@3 {
-			reg = <3>;
-			device_type = "ethernet-phy";
-		};
-	};
-
-	soc {
-		flash@30000000 {
-			status = "okay";
-			/* 8MB of flash */
-			reg = <0x30000000 0x00800000>;
-
-			partition@0 {
-				label = "RedBoot";
-				reg = <0x00000000 0x00020000>;
-				read-only;
-			};
-			partition@20000 {
-				label = "kernel";
-				reg = <0x00020000 0x00100000>;
-			};
-			partition@120000 {
-				label = "rootfs";
-				reg = <0x00120000 0x006a0000>;
-			};
-			partition@7c0000 {
-				label = "VCTL";
-				reg = <0x007c0000 0x00010000>;
-				read-only;
-			};
-			partition@7d0000 {
-				label = "cfg";
-				reg = <0x007d0000 0x00010000>;
-				read-only;
-			};
-			partition@7e0000 {
-				label = "FIS";
-				reg = <0x007e0000 0x00010000>;
-				read-only;
-			};
-		};
-
-		syscon: syscon@40000000 {
-			pinctrl {
-				/*
-				 * gpio0agrp cover line 0-4
-				 * gpio0bgrp cover line 5
-				 */
-				gpio0_default_pins: pinctrl-gpio0 {
-					mux {
-						function = "gpio0";
-						groups = "gpio0agrp",
-						"gpio0bgrp";
-					};
-				};
-				pinctrl-gmii {
-					/* This platform use both the ethernet ports */
-					mux {
-						function = "gmii";
-						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
-					};
-				};
-			};
-		};
-
-		gpio0: gpio@4d000000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gpio0_default_pins>;
-		};
-
-		pci@50000000 {
-			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
-		};
-
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy1>;
-			};
-		};
-
-		usb@68000000 {
-			status = "okay";
-		};
-
-		usb@69000000 {
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/gemini/Makefile b/arch/arm/boot/dts/gemini/Makefile
new file mode 100644
index 000000000000..f9f63ce3eb49
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_GEMINI) += \
+	gemini-dlink-dir-685.dtb \
+	gemini-dlink-dns-313.dtb \
+	gemini-nas4220b.dtb \
+	gemini-ns2502.dtb \
+	gemini-rut1xx.dtb \
+	gemini-sl93512r.dtb \
+	gemini-sq201.dtb \
+	gemini-ssi1328.dtb \
+	gemini-wbd111.dtb \
+	gemini-wbd222.dtb
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
index e2030ba16512..b4dbcf8f168e 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dir-685.dts
@@ -27,10 +27,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
@@ -61,9 +61,9 @@
 		#size-cells = <0>;
 
 		/* Collides with IDE pins, that's cool (we do not use them) */
-		gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
 		num-chipselects = <1>;
 
@@ -119,13 +119,11 @@
 
 	/*
 	 * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
-	 * Since the platform has no temperature sensor, this is controlled
-	 * from userspace by using the hard disks S.M.A.R.T. temperature
 	 * sensor. It is turned on when the temperature exceeds 46 degrees
 	 * and turned off when the temperatures goes below 41 degrees
 	 * (celsius).
 	 */
-	gpio-fan {
+	fan0: gpio-fan {
 		compatible = "gpio-fan";
 		/* Collides with IDE */
 		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
@@ -133,11 +131,45 @@
 		#cooling-cells = <2>;
 	};
 
+	thermal-zones {
+		chassis-thermal {
+			/* Poll every 20 seconds */
+			polling-delay = <20000>;
+			/* Poll every 2nd second when cooling */
+			polling-delay-passive = <2000>;
+			/*  Use the thermal sensor in the hard drive */
+			thermal-sensors = <&drive0>;
+
+			/* Tripping points from the fan.script in the rootfs */
+			trips {
+				alert: chassis-alert {
+					/* At 43 degrees turn on the fan */
+					temperature = <43000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				crit: chassis-crit {
+					/* Just shut down at 60 degrees */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&alert>;
+					cooling-device = <&fan0 1 1>;
+				};
+			};
+		};
+	};
+
 	/*
 	 * The touchpad input is connected to a GPIO bit-banged
 	 * I2C bus.
 	 */
-	gpio-i2c {
+	i2c {
 		compatible = "i2c-gpio";
 		/* Collides with ICE */
 		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -155,7 +187,7 @@
 	};
 
 	/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
-	switch {
+	ethernet-switch {
 		compatible = "realtek,rtl8366rb";
 		/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
 		mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
@@ -172,36 +204,36 @@
 			#interrupt-cells = <1>;
 		};
 
-		ports {
+		ethernet-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			port@0 {
+			ethernet-port@0 {
 				reg = <0>;
 				label = "lan0";
 				phy-handle = <&phy0>;
 			};
-			port@1 {
+			ethernet-port@1 {
 				reg = <1>;
 				label = "lan1";
 				phy-handle = <&phy1>;
 			};
-			port@2 {
+			ethernet-port@2 {
 				reg = <2>;
 				label = "lan2";
 				phy-handle = <&phy2>;
 			};
-			port@3 {
+			ethernet-port@3 {
 				reg = <3>;
 				label = "lan3";
 				phy-handle = <&phy3>;
 			};
-			port@4 {
+			ethernet-port@4 {
 				reg = <4>;
 				label = "wan";
 				phy-handle = <&phy4>;
 			};
-			rtl8366rb_cpu_port: port@5 {
+			rtl8366rb_cpu_port: ethernet-port@5 {
 				reg = <5>;
 				label = "cpu";
 				ethernet = <&gmac0>;
@@ -220,27 +252,27 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			phy0: phy@0 {
+			phy0: ethernet-phy@0 {
 				reg = <0>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <0>;
 			};
-			phy1: phy@1 {
+			phy1: ethernet-phy@1 {
 				reg = <1>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <1>;
 			};
-			phy2: phy@2 {
+			phy2: ethernet-phy@2 {
 				reg = <2>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <2>;
 			};
-			phy3: phy@3 {
+			phy3: ethernet-phy@3 {
 				reg = <3>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <3>;
 			};
-			phy4: phy@4 {
+			phy4: ethernet-phy@4 {
 				reg = <4>;
 				interrupt-parent = <&switch_intc>;
 				interrupts = <12>;
@@ -407,24 +439,6 @@
 
 		pci@50000000 {
 			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
 		ethernet@60000000 {
@@ -443,15 +457,24 @@
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
+
+			/*
+			 * This drive may have a temperature sensor with a
+			 * thermal zone we can use for thermal control of the
+			 * chassis temperature using the fan.
+			 */
+			drive0: ide-port@0 {
+				reg = <0>;
+				#thermal-sensor-cells = <0>;
+			};
 		};
 
 		display-controller@6a000000 {
 			status = "okay";
 
-			port@0 {
-				reg = <0>;
+			port {
 				display_out: endpoint {
 					remote-endpoint = <&panel_in>;
 				};
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
index 360642a02a48..8c54d3a5a721 100644
--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+++ b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts
@@ -33,10 +33,10 @@
 	gpio_keys {
 		compatible = "gpio-keys";
 
-		button-esc {
+		button-reset {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_ESC>;
+			linux,code = <KEY_RESTART>;
 			label = "reset";
 			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
 		};
@@ -80,9 +80,18 @@
 		#cooling-cells = <2>;
 	};
 
+	/*
+	 * This is the type B USB connector on the device,
+	 * a GPIO-controlled USB VBUS detect
+	 */
+	usb1_phy: phy {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		#phy-cells = <0>;
+		vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+	};
 
 	/* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
-	gpio-i2c {
+	i2c {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -140,7 +149,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		/* Uses MDC and MDIO */
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
@@ -164,6 +173,8 @@
 			compatible = "cortina,gemini-flash", "jedec-flash";
 			status = "okay";
 			reg = <0x30000000 0x00080000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
 			/*
 			 * This "RedBoot" is the Storlink derivative.
@@ -297,8 +308,16 @@
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
+
+		usb@69000000 {
+			status = "okay";
+			dr_mode = "peripheral";
+			usb-phy = <&usb1_phy>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_default_pins>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
index 521714f38eed..6544c730340f 100644
--- a/arch/arm/boot/dts/gemini-nas4220b.dts
+++ b/arch/arm/boot/dts/gemini/gemini-nas4220b.dts
@@ -62,7 +62,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -84,7 +84,7 @@
 			partitions {
 				compatible = "redboot-fis";
 				/* Eraseblock at 0xfe0000 */
-				fis-index-block = <0x1fc>;
+				fis-index-block = <0x7f>;
 			};
 		};
 
@@ -170,11 +170,11 @@
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
 
-		ata@63400000 {
+		ide@63400000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/gemini/gemini-ns2502.dts b/arch/arm/boot/dts/gemini/gemini-ns2502.dts
new file mode 100644
index 000000000000..e6eeb35e8819
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-ns2502.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for Edimax NS 2502
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "Edimax NS-2502";
+	compatible = "edimax,ns-2502", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii-id";
+		phy-handle = <&phy0>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 8MB of flash */
+	reg = <0x30000000 0x00800000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0x7e0000 */
+		fis-index-block = <0x3f>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <3>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			    mux {
+				    function = "gpio0";
+				    groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp";
+			    };
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp";
+				};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
index 9611ddf06792..0ebda4efd9d0 100644
--- a/arch/arm/boot/dts/gemini-rut1xx.dts
+++ b/arch/arm/boot/dts/gemini/gemini-rut1xx.dts
@@ -56,7 +56,7 @@
 		};
 	};
 
-	mdio0: ethernet-phy {
+	mdio0: mdio {
 		compatible = "virtual,mdio-gpio";
 		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
 			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
@@ -125,18 +125,6 @@
 			};
 		};
 
-		ethernet@60000000 {
-			status = "okay";
-
-			ethernet-port@0 {
-				phy-mode = "rgmii";
-				phy-handle = <&phy0>;
-			};
-			ethernet-port@1 {
-				/* Not used in this platform */
-			};
-		};
-
 		usb@68000000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
index a98af0351906..4992ec276de9 100644
--- a/arch/arm/boot/dts/gemini-sl93512r.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sl93512r.dts
@@ -43,7 +43,7 @@
 		button-setup {
 			debounce-interval = <50>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
@@ -87,13 +87,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* Check pin collisions */
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		switch@0 {
+		ethernet-switch@0 {
 			compatible = "vitesse,vsc7385";
 			reg = <0>;
 			/* Specified for 2.5 MHz or below */
@@ -101,27 +101,27 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "lan1";
 				};
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "lan2";
 				};
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "lan3";
 				};
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "lan4";
 				};
-				vsc: port@6 {
+				vsc: ethernet-port@6 {
 					reg = <6>;
 					label = "cpu";
 					ethernet = <&gmac1>;
@@ -256,24 +256,6 @@
 
 		pci@50000000 {
 			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
 		ethernet@60000000 {
@@ -293,11 +275,11 @@
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
 
-		ata@63400000 {
+		ide@63400000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini/gemini-sq201.dts
index 239dfacaae4d..f8c6f6e5cdea 100644
--- a/arch/arm/boot/dts/gemini-sq201.dts
+++ b/arch/arm/boot/dts/gemini/gemini-sq201.dts
@@ -30,7 +30,7 @@
 		button-setup {
 			debounce-interval = <100>;
 			wakeup-source;
-			linux,code = <KEY_SETUP>;
+			linux,code = <KEY_RESTART>;
 			label = "factory reset";
 			/* Conflict with NAND flash */
 			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
@@ -72,13 +72,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		/* Check pin collisions */
-		gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio1 30 GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
 
-		switch@0 {
+		ethernet-switch@0 {
 			compatible = "vitesse,vsc7395";
 			reg = <0>;
 			/* Specified for 2.5 MHz or below */
@@ -86,27 +86,27 @@
 			gpio-controller;
 			#gpio-cells = <2>;
 
-			ports {
+			ethernet-ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				ethernet-port@0 {
 					reg = <0>;
 					label = "lan1";
 				};
-				port@1 {
+				ethernet-port@1 {
 					reg = <1>;
 					label = "lan2";
 				};
-				port@2 {
+				ethernet-port@2 {
 					reg = <2>;
 					label = "lan3";
 				};
-				port@3 {
+				ethernet-port@3 {
 					reg = <3>;
 					label = "lan4";
 				};
-				vsc: port@6 {
+				vsc: ethernet-port@6 {
 					reg = <6>;
 					label = "cpu";
 					ethernet = <&gmac1>;
@@ -252,24 +252,6 @@
 
 		pci@50000000 {
 			status = "okay";
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map =
-				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
-				<0x4800 0 0 2 &pci_intc 1>,
-				<0x4800 0 0 3 &pci_intc 2>,
-				<0x4800 0 0 4 &pci_intc 3>,
-				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
-				<0x5000 0 0 2 &pci_intc 2>,
-				<0x5000 0 0 3 &pci_intc 3>,
-				<0x5000 0 0 4 &pci_intc 0>,
-				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
-				<0x5800 0 0 2 &pci_intc 3>,
-				<0x5800 0 0 3 &pci_intc 0>,
-				<0x5800 0 0 4 &pci_intc 1>,
-				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
-				<0x6000 0 0 2 &pci_intc 0>,
-				<0x6000 0 0 3 &pci_intc 1>,
-				<0x6000 0 0 4 &pci_intc 2>;
 		};
 
 		ethernet@60000000 {
@@ -289,7 +271,7 @@
 			};
 		};
 
-		ata@63000000 {
+		ide@63000000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/gemini/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini/gemini-ssi1328.dts
new file mode 100644
index 000000000000..42e85f07cf76
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-ssi1328.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for SSI 1328
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "SSI 1328";
+	compatible = "ssi,1328", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LAN Marvell 88E1118 */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+		/* WAN ICPlus IP101A */
+		phy1: ethernet-phy@2 {
+			reg = <2>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+	ethernet-port@1 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy1>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 32MB of flash */
+	reg = <0x30000000 0x03200000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0xfe0000 */
+		fis-index-block = <0x7F>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <0>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			mux {
+				function = "gpio0";
+				groups = "gpio0agrp", "gpio0bgrp";
+			};
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			/* This platform use both the ethernet ports */
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd111.dts b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
new file mode 100644
index 000000000000..6a0c89e0c918
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-wbd111.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-111
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-111";
+	compatible = "wiligear,wiliboard-wbd111", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-greeb-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini/gemini-wbd222.dts b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
new file mode 100644
index 000000000000..d8b34ebad4b0
--- /dev/null
+++ b/arch/arm/boot/dts/gemini/gemini-wbd222.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-222
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-222";
+	compatible = "wiligear,wiliboard-wbd222", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+
+		phy1: ethernet-phy@3 {
+			reg = <3>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+				pinctrl-gmii {
+					/* This platform use both the ethernet ports */
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy1>;
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini/gemini.dtsi
index 8cf67b11751f..befe322bd7de 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini/gemini.dtsi
@@ -16,14 +16,12 @@
 		compatible = "simple-bus";
 		interrupt-parent = <&intcon>;
 
-		flash@30000000 {
+		flash: flash@30000000 {
 			compatible = "cortina,gemini-flash", "cfi-flash";
 			syscon = <&syscon>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pflash_default_pins>;
 			bank-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
 			status = "disabled";
 		};
 
@@ -191,7 +189,7 @@
 		};
 
 		rtc@45000000 {
-			compatible = "cortina,gemini-rtc";
+			compatible = "cortina,gemini-rtc", "faraday,ftrtc010";
 			reg = <0x45000000 0x100>;
 			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_RTC>;
@@ -286,11 +284,31 @@
 			clock-names = "PCLK", "PCICLK";
 			pinctrl-names = "default";
 			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			#interrupt-cells = <1>;
 			status = "disabled";
 
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+
 			bus-range = <0x00 0xff>;
 			/* PCI ranges mappings */
 			ranges =
@@ -321,7 +339,7 @@
 			};
 		};
 
-		ethernet@60000000 {
+		ethernet: ethernet@60000000 {
 			compatible = "cortina,gemini-ethernet";
 			reg = <0x60000000 0x4000>, /* Global registers, queue */
 			      <0x60004000 0x2000>, /* V-bit */
@@ -356,7 +374,15 @@
 			};
 		};
 
-		ata@63000000 {
+		crypto: crypto@62000000 {
+			compatible = "cortina,sl3516-crypto";
+			reg = <0x62000000 0x10000>;
+			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_SECURITY>;
+			clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
+		};
+
+		ide0: ide@63000000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63000000 0x1000>;
 			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
@@ -365,9 +391,11 @@
 			clock-names = "PCLK";
 			sata = <&sata>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
-		ata@63400000 {
+		ide1: ide@63400000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63400000 0x1000>;
 			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
@@ -376,6 +404,8 @@
 			clock-names = "PCLK";
 			sata = <&sata>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		dma-controller@67000000 {
@@ -405,13 +435,11 @@
 			clock-names = "PCLK", "TVE";
 			pinctrl-names = "default";
 			pinctrl-0 = <&tvc_default_pins>;
-			#address-cells = <1>;
-			#size-cells = <0>;
 			status = "disabled";
 		};
 
-		usb@68000000 {
-			compatible = "cortina,gemini-usb", "faraday,fotg210";
+		usb0: usb@68000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
 			reg = <0x68000000 0x1000>;
 			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_USB0>;
@@ -427,12 +455,14 @@
 			 */
 			pinctrl-names = "default";
 			pinctrl-0 = <&usb_default_pins>;
+			/* Default to host mode */
+			dr_mode = "host";
 			syscon = <&syscon>;
 			status = "disabled";
 		};
 
-		usb@69000000 {
-			compatible = "cortina,gemini-usb", "faraday,fotg210";
+		usb1: usb@69000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
 			reg = <0x69000000 0x1000>;
 			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
 			resets = <&syscon GEMINI_RESET_USB1>;
diff --git a/arch/arm/boot/dts/hisilicon/Makefile b/arch/arm/boot/dts/hisilicon/Makefile
new file mode 100644
index 000000000000..5ce0512c0010
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HI3xxx) += \
+	hi3620-hi4511.dtb
+dtb-$(CONFIG_ARCH_HIP01) += \
+	hip01-ca9x2.dtb
+dtb-$(CONFIG_ARCH_HIP04) += \
+	hip04-d01.dtb
+dtb-$(CONFIG_ARCH_HISI) += \
+	hi3519-demb.dtb
+dtb-$(CONFIG_ARCH_HIX5HD2) += \
+	hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+	sd5203.dtb
diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hisilicon/hi3519-demb.dts
index 64f8ed126931..f473fa22e9ce 100644
--- a/arch/arm/boot/dts/hi3519-demb.dts
+++ b/arch/arm/boot/dts/hisilicon/hi3519-demb.dts
@@ -14,7 +14,7 @@
 		serial0 = &uart0;
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000>;
 	};
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
index 410409a0ed66..a42b71cdc5d7 100644
--- a/arch/arm/boot/dts/hi3519.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
@@ -52,45 +52,45 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12100000 0x1000>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART0_CLK>;
-			clock-names = "apb_pclk";
-			status = "disable";
+			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
 		};
 
 		uart1: serial@12101000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12101000 0x1000>;
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART1_CLK>;
-			clock-names = "apb_pclk";
-			status = "disable";
+			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
 		};
 
 		uart2: serial@12102000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12102000 0x1000>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART2_CLK>;
-			clock-names = "apb_pclk";
-			status = "disable";
+			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
 		};
 
 		uart3: serial@12103000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12103000 0x1000>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART3_CLK>;
-			clock-names = "apb_pclk";
-			status = "disable";
+			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
 		};
 
 		uart4: serial@12104000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12104000 0x1000>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART4_CLK>;
-			clock-names = "apb_pclk";
-			status = "disable";
+			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
 		};
 
 		dual_timer0: timer@12000000 {
@@ -100,7 +100,7 @@
 			reg = <0x12000000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer1: timer@12001000 {
@@ -110,7 +110,7 @@
 			reg = <0x12001000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		dual_timer2: timer@12002000 {
@@ -120,43 +120,43 @@
 			reg = <0x12002000 0x1000>;
 			clocks = <&clk_3m>;
 			clock-names = "apb_pclk";
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus0: spi@12120000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x12120000 0x1000>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI0_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HI3519_SPI0_CLK>, <&crg HI3519_SPI0_CLK>;
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus1: spi@12121000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x12121000 0x1000>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI1_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HI3519_SPI1_CLK>, <&crg HI3519_SPI1_CLK>;
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		spi_bus2: spi@12122000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x12122000 0x1000>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI2_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HI3519_SPI2_CLK>, <&crg HI3519_SPI2_CLK>;
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		sysctrl: system-controller@12020000 {
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hisilicon/hi3620-hi4511.dts
index 8c703c3f2fe0..f1c816a1d7cf 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hisilicon/hi3620-hi4511.dts
@@ -17,168 +17,168 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x20000000>;
 	};
 
-	amba {
+	amba-bus {
 		dual_timer0: dual_timer@800000 {
-			status = "ok";
+			status = "okay";
 		};
 
-		uart0: uart@b00000 {	/* console */
-			pinctrl-names = "default", "idle";
+		uart0: serial@b00000 {	/* console */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
 			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart1: uart@b01000 { /* modem */
-			pinctrl-names = "default", "idle";
+		uart1: serial@b01000 { /* modem */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
 			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart2: uart@b02000 { /* audience */
-			pinctrl-names = "default", "idle";
+		uart2: serial@b02000 { /* audience */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
 			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart3: uart@b03000 {
-			pinctrl-names = "default", "idle";
+		uart3: serial@b03000 {
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
 			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart4: uart@b04000 {
-			pinctrl-names = "default", "idle";
+		uart4: serial@b04000 {
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
 			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
-			status = "ok";
+			status = "okay";
 		};
 
 		pmx0: pinmux@803000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&board_pmx_pins>;
 
-			board_pmx_pins: board_pmx_pins {
+			board_pmx_pins: board-pins {
 				pinctrl-single,pins = <
 					0x008 0x0	/* GPIO -- eFUSE_DOUT */
 					0x100 0x0	/* USIM_CLK & USIM_DATA (IOMG63) */
 				>;
 			};
-			uart0_pmx_func: uart0_pmx_func {
+			uart0_pmx_func: uart0-pins {
 				pinctrl-single,pins = <
 					0x0f0 0x0
 					0x0f4 0x0	/* UART0_RX & UART0_TX */
 				>;
 			};
-			uart0_pmx_idle: uart0_pmx_idle {
+			uart0_pmx_idle: uart0-idle-pins {
 				pinctrl-single,pins = <
 					/*0x0f0 0x1*/	/* UART0_CTS & UART0_RTS */
 					0x0f4 0x1	/* UART0_RX & UART0_TX */
 				>;
 			};
-			uart1_pmx_func: uart1_pmx_func {
+			uart1_pmx_func: uart1-pins {
 				pinctrl-single,pins = <
 					0x0f8 0x0	/* UART1_CTS & UART1_RTS (IOMG61) */
 					0x0fc 0x0	/* UART1_RX & UART1_TX (IOMG62) */
 				>;
 			};
-			uart1_pmx_idle: uart1_pmx_idle {
+			uart1_pmx_idle: uart1-idle-pins {
 				pinctrl-single,pins = <
 					0x0f8 0x1	/* GPIO (IOMG61) */
 					0x0fc 0x1	/* GPIO (IOMG62) */
 				>;
 			};
-			uart2_pmx_func: uart2_pmx_func {
+			uart2_pmx_func: uart2-pins {
 				pinctrl-single,pins = <
 					0x104 0x2	/* UART2_RXD (IOMG96) */
 					0x108 0x2	/* UART2_TXD (IOMG64) */
 				>;
 			};
-			uart2_pmx_idle: uart2_pmx_idle {
+			uart2_pmx_idle: uart2-idle-pins {
 				pinctrl-single,pins = <
 					0x104 0x1	/* GPIO (IOMG96) */
 					0x108 0x1	/* GPIO (IOMG64) */
 				>;
 			};
-			uart3_pmx_func: uart3_pmx_func {
+			uart3_pmx_func: uart3-pins {
 				pinctrl-single,pins = <
 					0x160 0x2	/* UART3_CTS & UART3_RTS (IOMG85) */
 					0x164 0x2	/* UART3_RXD & UART3_TXD (IOMG86) */
 				>;
 			};
-			uart3_pmx_idle: uart3_pmx_idle {
+			uart3_pmx_idle: uart3-idle-pins {
 				pinctrl-single,pins = <
 					0x160 0x1	/* GPIO (IOMG85) */
 					0x164 0x1	/* GPIO (IOMG86) */
 				>;
 			};
-			uart4_pmx_func: uart4_pmx_func {
+			uart4_pmx_func: uart4-pins {
 				pinctrl-single,pins = <
 					0x168 0x0	/* UART4_CTS & UART4_RTS (IOMG87) */
 					0x16c 0x0	/* UART4_RXD (IOMG88) */
 					0x170 0x0	/* UART4_TXD (IOMG93) */
 				>;
 			};
-			uart4_pmx_idle: uart4_pmx_idle {
+			uart4_pmx_idle: uart4-idle-pins {
 				pinctrl-single,pins = <
 					0x168 0x1	/* GPIO (IOMG87) */
 					0x16c 0x1	/* GPIO (IOMG88) */
 					0x170 0x1	/* GPIO (IOMG93) */
 				>;
 			};
-			i2c0_pmx_func: i2c0_pmx_func {
+			i2c0_pmx_func: i2c0-pins {
 				pinctrl-single,pins = <
 					0x0b4 0x0	/* I2C0_SCL & I2C0_SDA (IOMG45) */
 				>;
 			};
-			i2c0_pmx_idle: i2c0_pmx_idle {
+			i2c0_pmx_idle: i2c0-idle-pins {
 				pinctrl-single,pins = <
 					0x0b4 0x1	/* GPIO (IOMG45) */
 				>;
 			};
-			i2c1_pmx_func: i2c1_pmx_func {
+			i2c1_pmx_func: i2c1-pins {
 				pinctrl-single,pins = <
 					0x0b8 0x0	/* I2C1_SCL & I2C1_SDA (IOMG46) */
 				>;
 			};
-			i2c1_pmx_idle: i2c1_pmx_idle {
+			i2c1_pmx_idle: i2c1-idle-pins {
 				pinctrl-single,pins = <
 					0x0b8 0x1	/* GPIO (IOMG46) */
 				>;
 			};
-			i2c2_pmx_func: i2c2_pmx_func {
+			i2c2_pmx_func: i2c2-pins {
 				pinctrl-single,pins = <
 					0x068 0x0	/* I2C2_SCL (IOMG26) */
 					0x06c 0x0	/* I2C2_SDA (IOMG27) */
 				>;
 			};
-			i2c2_pmx_idle: i2c2_pmx_idle {
+			i2c2_pmx_idle: i2c2-idle-pins {
 				pinctrl-single,pins = <
 					0x068 0x1	/* GPIO (IOMG26) */
 					0x06c 0x1	/* GPIO (IOMG27) */
 				>;
 			};
-			i2c3_pmx_func: i2c3_pmx_func {
+			i2c3_pmx_func: i2c3-pins {
 				pinctrl-single,pins = <
 					0x050 0x2	/* I2C3_SCL (IOMG20) */
 					0x054 0x2	/* I2C3_SDA (IOMG21) */
 				>;
 			};
-			i2c3_pmx_idle: i2c3_pmx_idle {
+			i2c3_pmx_idle: i2c3-idle-pins {
 				pinctrl-single,pins = <
 					0x050 0x1	/* GPIO (IOMG20) */
 					0x054 0x1	/* GPIO (IOMG21) */
 				>;
 			};
-			spi0_pmx_func: spi0_pmx_func {
+			spi0_pmx_func: spi0-pins {
 				pinctrl-single,pins = <
 					0x0d4 0x0	/* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
 					0x0d8 0x0	/* SPI0_CS0 (IOMG54) */
@@ -187,7 +187,7 @@
 					0x0e4 0x0	/* SPI0_CS3 (IOMG57) */
 				>;
 			};
-			spi0_pmx_idle: spi0_pmx_idle {
+			spi0_pmx_idle: spi0-idle-pins {
 				pinctrl-single,pins = <
 					0x0d4 0x1	/* GPIO (IOMG53) */
 					0x0d8 0x1	/* GPIO (IOMG54) */
@@ -196,21 +196,21 @@
 					0x0e4 0x1	/* GPIO (IOMG57) */
 				>;
 			};
-			spi1_pmx_func: spi1_pmx_func {
+			spi1_pmx_func: spi1-pins {
 				pinctrl-single,pins = <
 					0x184 0x0	/* SPI1_CLK/SPI1_DI (IOMG98) */
 					0x0e8 0x0	/* SPI1_DO (IOMG58) */
 					0x0ec 0x0	/* SPI1_CS (IOMG95) */
 				>;
 			};
-			spi1_pmx_idle: spi1_pmx_idle {
+			spi1_pmx_idle: spi1-idle-pins {
 				pinctrl-single,pins = <
 					0x184 0x1	/* GPIO (IOMG98) */
 					0x0e8 0x1	/* GPIO (IOMG58) */
 					0x0ec 0x1	/* GPIO (IOMG95) */
 				>;
 			};
-			kpc_pmx_func: kpc_pmx_func {
+			kpc_pmx_func: kpc-pins {
 				pinctrl-single,pins = <
 					0x12c 0x0	/* KEY_IN0 (IOMG73) */
 					0x130 0x0	/* KEY_IN1 (IOMG74) */
@@ -220,7 +220,7 @@
 					0x114 0x0	/* KEY_OUT2 (IOMG67) */
 				>;
 			};
-			kpc_pmx_idle: kpc_pmx_idle {
+			kpc_pmx_idle: kpc-idle-pins {
 				pinctrl-single,pins = <
 					0x12c 0x1	/* GPIO (IOMG73) */
 					0x130 0x1	/* GPIO (IOMG74) */
@@ -230,13 +230,13 @@
 					0x114 0x1	/* GPIO (IOMG67) */
 				>;
 			};
-			gpio_key_func: gpio_key_func {
+			gpio_key_func: gpio-key-pins {
 				pinctrl-single,pins = <
 					0x10c 0x1	/* KEY_OUT0/GPIO (IOMG65) */
 					0x130 0x1	/* KEY_IN1/GPIO (IOMG74) */
 				>;
 			};
-			emmc_pmx_func: emmc_pmx_func {
+			emmc_pmx_func: emmc-pins {
 				pinctrl-single,pins = <
 					0x030 0x2	/* eMMC_CMD/eMMC_CLK (IOMG12) */
 					0x018 0x0	/* NAND_CS3_N (IOMG6) */
@@ -245,7 +245,7 @@
 					0x02c 0x2	/* eMMC_DATA[0:7] (IOMG10) */
 				>;
 			};
-			emmc_pmx_idle: emmc_pmx_idle {
+			emmc_pmx_idle: emmc-idle-pins {
 				pinctrl-single,pins = <
 					0x030 0x0	/* GPIO (IOMG12) */
 					0x018 0x1	/* GPIO (IOMG6) */
@@ -254,19 +254,19 @@
 					0x02c 0x1	/* GPIO (IOMG10) */
 				>;
 			};
-			sd_pmx_func: sd_pmx_func {
+			sd_pmx_func: sd-pins {
 				pinctrl-single,pins = <
 					0x0bc 0x0	/* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
 					0x0c0 0x0	/* SD_DATA3 (IOMG48) */
 				>;
 			};
-			sd_pmx_idle: sd_pmx_idle {
+			sd_pmx_idle: sd-idle-pins {
 				pinctrl-single,pins = <
 					0x0bc 0x1	/* GPIO (IOMG47) */
 					0x0c0 0x1	/* GPIO (IOMG48) */
 				>;
 			};
-			nand_pmx_func: nand_pmx_func {
+			nand_pmx_func: nand-pins {
 				pinctrl-single,pins = <
 					0x00c 0x0	/* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
 					0x010 0x0	/* NAND_CS1_N (IOMG4) */
@@ -279,7 +279,7 @@
 					0x02c 0x0	/* NAND_DATA[8:15] (IOMG10) */
 				>;
 			};
-			nand_pmx_idle: nand_pmx_idle {
+			nand_pmx_idle: nand-idle-pins {
 				pinctrl-single,pins = <
 					0x00c 0x1	/* GPIO (IOMG3) */
 					0x010 0x1	/* GPIO (IOMG4) */
@@ -292,17 +292,17 @@
 					0x02c 0x1	/* GPIO (IOMG10) */
 				>;
 			};
-			sdio_pmx_func: sdio_pmx_func {
+			sdio_pmx_func: sdio-pins {
 				pinctrl-single,pins = <
 					0x0c4 0x0	/* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
 				>;
 			};
-			sdio_pmx_idle: sdio_pmx_idle {
+			sdio_pmx_idle: sdio-idle-pins {
 				pinctrl-single,pins = <
 					0x0c4 0x1	/* GPIO (IOMG49) */
 				>;
 			};
-			audio_out_pmx_func: audio_out_pmx_func {
+			audio_out_pmx_func: audio-out-pins {
 				pinctrl-single,pins = <
 					0x0f0 0x1	/* GPIO (IOMG59), audio spk & earphone */
 				>;
@@ -314,7 +314,7 @@
 			pinctrl-0 = <	&board_pu_pins &board_pd_pins &board_pd_ps_pins
 					&board_np_pins &board_ps_pins &kpc_cfg_func
 					&audio_out_cfg_func>;
-			board_pu_pins: board_pu_pins {
+			board_pu_pins: board-pu-pins {
 				pinctrl-single,pins = <
 					0x014 0		/* GPIO_158 (IOCFG2) */
 					0x018 0		/* GPIO_159 (IOCFG3) */
@@ -324,7 +324,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 			};
-			board_pd_pins: board_pd_pins {
+			board_pd_pins: board-pd-pins {
 				pinctrl-single,pins = <
 					0x038 0		/* eFUSE_DOUT (IOCFG11) */
 					0x150 0		/* ISP_GPIO8 (IOCFG93) */
@@ -333,7 +333,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			board_pd_ps_pins: board_pd_ps_pins {
+			board_pd_ps_pins: board-pd-ps-pins {
 				pinctrl-single,pins = <
 					0x2d8 0		/* CLK_OUT0 (IOCFG190) */
 					0x004 0		/* PMU_SPI_DATA (IOCFG192) */
@@ -342,21 +342,21 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			board_np_pins: board_np_pins {
+			board_np_pins: board-np-pins {
 				pinctrl-single,pins = <
 					0x24c 0		/* KEYPAD_OUT7 (IOCFG155) */
 				>;
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			board_ps_pins: board_ps_pins {
+			board_ps_pins: board-ps-pins {
 				pinctrl-single,pins = <
 					0x000 0		/* PMU_SPI_CLK (IOCFG191) */
 					0x008 0		/* PMU_SPI_CS_N (IOCFG193) */
 				>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			uart0_cfg_func: uart0_cfg_func {
+			uart0_cfg_func: uart0-cfg-pins {
 				pinctrl-single,pins = <
 					0x208 0		/* UART0_RXD (IOCFG138) */
 					0x20c 0		/* UART0_TXD (IOCFG139) */
@@ -364,7 +364,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart0_cfg_idle: uart0_cfg_idle {
+			uart0_cfg_idle: uart0-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x208 0		/* UART0_RXD (IOCFG138) */
 					0x20c 0		/* UART0_TXD (IOCFG139) */
@@ -372,7 +372,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart1_cfg_func: uart1_cfg_func {
+			uart1_cfg_func: uart1-cfg-pins {
 				pinctrl-single,pins = <
 					0x210 0		/* UART1_CTS (IOCFG140) */
 					0x214 0		/* UART1_RTS (IOCFG141) */
@@ -382,7 +382,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart1_cfg_idle: uart1_cfg_idle {
+			uart1_cfg_idle: uart1-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x210 0		/* UART1_CTS (IOCFG140) */
 					0x214 0		/* UART1_RTS (IOCFG141) */
@@ -392,7 +392,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart2_cfg_func: uart2_cfg_func {
+			uart2_cfg_func: uart2-cfg-pins {
 				pinctrl-single,pins = <
 					0x220 0		/* UART2_CTS (IOCFG144) */
 					0x224 0		/* UART2_RTS (IOCFG145) */
@@ -402,7 +402,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart2_cfg_idle: uart2_cfg_idle {
+			uart2_cfg_idle: uart2-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x220 0		/* GPIO (IOCFG144) */
 					0x224 0		/* GPIO (IOCFG145) */
@@ -412,7 +412,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart3_cfg_func: uart3_cfg_func {
+			uart3_cfg_func: uart3-cfg-pins {
 				pinctrl-single,pins = <
 					0x294 0		/* UART3_CTS (IOCFG173) */
 					0x298 0		/* UART3_RTS (IOCFG174) */
@@ -422,7 +422,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart3_cfg_idle: uart3_cfg_idle {
+			uart3_cfg_idle: uart3-cfg-idle-pins {
 				pinctrl-single,pins = <
 					0x294 0		/* UART3_CTS (IOCFG173) */
 					0x298 0		/* UART3_RTS (IOCFG174) */
@@ -432,7 +432,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			uart4_cfg_func: uart4_cfg_func {
+			uart4_cfg_func: uart4-cfg-pins {
 				pinctrl-single,pins = <
 					0x2a4 0		/* UART4_CTS (IOCFG177) */
 					0x2a8 0		/* UART4_RTS (IOCFG178) */
@@ -442,7 +442,7 @@
 				pinctrl-single,bias-pulldown = <0 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			i2c0_cfg_func: i2c0_cfg_func {
+			i2c0_cfg_func: i2c0-cfg-pins {
 				pinctrl-single,pins = <
 					0x17c 0		/* I2C0_SCL (IOCFG103) */
 					0x180 0		/* I2C0_SDA (IOCFG104) */
@@ -451,7 +451,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c1_cfg_func: i2c1_cfg_func {
+			i2c1_cfg_func: i2c1-cfg-pins {
 				pinctrl-single,pins = <
 					0x184 0		/* I2C1_SCL (IOCFG105) */
 					0x188 0		/* I2C1_SDA (IOCFG106) */
@@ -460,7 +460,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c2_cfg_func: i2c2_cfg_func {
+			i2c2_cfg_func: i2c2-cfg-pins {
 				pinctrl-single,pins = <
 					0x118 0		/* I2C2_SCL (IOCFG79) */
 					0x11c 0		/* I2C2_SDA (IOCFG80) */
@@ -469,7 +469,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			i2c3_cfg_func: i2c3_cfg_func {
+			i2c3_cfg_func: i2c3-cfg-pins {
 				pinctrl-single,pins = <
 					0x100 0		/* I2C3_SCL (IOCFG73) */
 					0x104 0		/* I2C3_SDA (IOCFG74) */
@@ -478,7 +478,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi0_cfg_func1: spi0_cfg_func1 {
+			spi0_cfg_func1: spi0-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x1d4 0		/* SPI0_CLK (IOCFG125) */
 					0x1d8 0		/* SPI0_DI (IOCFG126) */
@@ -488,7 +488,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi0_cfg_func2: spi0_cfg_func2 {
+			spi0_cfg_func2: spi0-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x1e0 0		/* SPI0_CS0 (IOCFG128) */
 					0x1e4 0		/* SPI0_CS1 (IOCFG129) */
@@ -499,7 +499,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi1_cfg_func1: spi1_cfg_func1 {
+			spi1_cfg_func1: spi1-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x1f0 0		/* SPI1_CLK (IOCFG132) */
 					0x1f4 0		/* SPI1_DI (IOCFG133) */
@@ -509,7 +509,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			spi1_cfg_func2: spi1_cfg_func2 {
+			spi1_cfg_func2: spi1-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x1fc 0		/* SPI1_CS (IOCFG135) */
 				>;
@@ -517,7 +517,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			kpc_cfg_func: kpc_cfg_func {
+			kpc_cfg_func: kpc-cfg-pins {
 				pinctrl-single,pins = <
 					0x250 0		/* KEY_IN0 (IOCFG156) */
 					0x254 0		/* KEY_IN1 (IOCFG157) */
@@ -529,7 +529,7 @@
 				pinctrl-single,bias-pulldown = <2 2 0 2>;
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 			};
-			emmc_cfg_func: emmc_cfg_func {
+			emmc_cfg_func: emmc-cfg-pins {
 				pinctrl-single,pins = <
 					0x0ac 0		/* eMMC_CMD (IOCFG40) */
 					0x0b0 0		/* eMMC_CLK (IOCFG41) */
@@ -549,7 +549,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sd_cfg_func1: sd_cfg_func1 {
+			sd_cfg_func1: sd-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x18c 0		/* SD_CLK (IOCFG107) */
 					0x190 0		/* SD_CMD (IOCFG108) */
@@ -558,7 +558,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sd_cfg_func2: sd_cfg_func2 {
+			sd_cfg_func2: sd-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x194 0		/* SD_DATA0 (IOCFG109) */
 					0x198 0		/* SD_DATA1 (IOCFG110) */
@@ -569,7 +569,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x70 0xf0>;
 			};
-			nand_cfg_func1: nand_cfg_func1 {
+			nand_cfg_func1: nand-cfg-func1-pins {
 				pinctrl-single,pins = <
 					0x03c 0		/* NAND_ALE (IOCFG12) */
 					0x040 0		/* NAND_CLE (IOCFG13) */
@@ -594,7 +594,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			nand_cfg_func2: nand_cfg_func2 {
+			nand_cfg_func2: nand-cfg-func2-pins {
 				pinctrl-single,pins = <
 					0x044 0		/* NAND_RE_N (IOCFG14) */
 					0x048 0		/* NAND_WE_N (IOCFG15) */
@@ -611,7 +611,7 @@
 				pinctrl-single,bias-pullup = <1 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			sdio_cfg_func: sdio_cfg_func {
+			sdio_cfg_func: sdio-cfg-pins {
 				pinctrl-single,pins = <
 					0x1a4 0		/* SDIO0_CLK (IOCG113) */
 					0x1a8 0		/* SDIO0_CMD (IOCG114) */
@@ -624,7 +624,7 @@
 				pinctrl-single,bias-pullup = <0 1 0 1>;
 				pinctrl-single,drive-strength = <0x30 0xf0>;
 			};
-			audio_out_cfg_func: audio_out_cfg_func {
+			audio_out_cfg_func: audio-out-cfg-pins {
 				pinctrl-single,pins = <
 					0x200 0		/* GPIO (IOCFG136) */
 					0x204 0		/* GPIO (IOCFG137) */
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hisilicon/hi3620.dtsi
index 9c207a690df5..a254ec009296 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hi3620.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. Hi3620 SoC
+ * HiSilicon Ltd. Hi3620 SoC
  *
- * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 HiSilicon Ltd.
  * Copyright (C) 2012-2013 Linaro Ltd.
  *
  * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
@@ -63,7 +63,7 @@
 		};
 	};
 
-	amba {
+	amba-bus {
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -71,7 +71,7 @@
 		interrupt-parent = <&gic>;
 		ranges = <0 0xfc000000 0x2000000>;
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0x100000 0x100000>;
 			interrupts = <0 15 4>;
@@ -89,7 +89,7 @@
 		};
 
 		sysctrl: system-controller@802000 {
-			compatible = "hisilicon,sysctrl";
+			compatible = "hisilicon,sysctrl", "syscon";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x802000 0x1000>;
@@ -111,8 +111,10 @@
 			reg = <0x800000 0x1000>;
 			/* timer00 & timer01 */
 			interrupts = <0 0 4>, <0 1 4>;
-			clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER0_MUX>,
+				 <&clock HI3620_TIMER1_MUX>,
+				 <&clock HI3620_TIMER0_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -121,8 +123,10 @@
 			reg = <0x801000 0x1000>;
 			/* timer10 & timer11 */
 			interrupts = <0 2 4>, <0 3 4>;
-			clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER2_MUX>,
+				 <&clock HI3620_TIMER3_MUX>,
+				 <&clock HI3620_TIMER2_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -131,8 +135,10 @@
 			reg = <0xa01000 0x1000>;
 			/* timer20 & timer21 */
 			interrupts = <0 4 4>, <0 5 4>;
-			clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER4_MUX>,
+				 <&clock HI3620_TIMER5_MUX>,
+				 <&clock HI3620_TIMER4_MUX>;
+			clock-names = "timer0lck", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -141,8 +147,10 @@
 			reg = <0xa02000 0x1000>;
 			/* timer30 & timer31 */
 			interrupts = <0 6 4>, <0 7 4>;
-			clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER6_MUX>,
+				 <&clock HI3620_TIMER7_MUX>,
+				 <&clock HI3620_TIMER6_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -151,8 +159,10 @@
 			reg = <0xa03000 0x1000>;
 			/* timer40 & timer41 */
 			interrupts = <0 96 4>, <0 97 4>;
-			clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER8_MUX>,
+				 <&clock HI3620_TIMER9_MUX>,
+				 <&clock HI3620_TIMER8_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -162,48 +172,48 @@
 			interrupts = <1 13 0xf01>;
 		};
 
-		uart0: uart@b00000 {
+		uart0: serial@b00000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb00000 0x1000>;
 			interrupts = <0 20 4>;
-			clocks = <&clock HI3620_UARTCLK0>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart1: uart@b01000 {
+		uart1: serial@b01000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb01000 0x1000>;
 			interrupts = <0 21 4>;
-			clocks = <&clock HI3620_UARTCLK1>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart2: uart@b02000 {
+		uart2: serial@b02000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb02000 0x1000>;
 			interrupts = <0 22 4>;
-			clocks = <&clock HI3620_UARTCLK2>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart3: uart@b03000 {
+		uart3: serial@b03000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb03000 0x1000>;
 			interrupts = <0 23 4>;
-			clocks = <&clock HI3620_UARTCLK3>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart4: uart@b04000 {
+		uart4: serial@b04000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb04000 0x1000>;
 			interrupts = <0 24 4>;
-			clocks = <&clock HI3620_UARTCLK4>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -535,10 +545,9 @@
 			compatible = "pinctrl-single";
 			reg = <0x803000 0x188>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			#pinctrl-cells = <1>;
 			#gpio-range-cells = <3>;
-			ranges;
 
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <7>;
@@ -557,9 +566,8 @@
 			compatible = "pinconf-single";
 			reg = <0x803800 0x2dc>;
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 			#pinctrl-cells = <1>;
-			ranges;
 
 			pinctrl-single,register-width = <32>;
 		};
diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts
index f05e74eacfe0..f3faf247cd61 100644
--- a/arch/arm/boot/dts/hip01-ca9x2.dts
+++ b/arch/arm/boot/dts/hisilicon/hip01-ca9x2.dts
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. HiP01 SoC
+ * HiSilicon Ltd. HiP01 SoC
  *
- * Copyright (C) 2014 Hisilicon Ltd.
+ * Copyright (C) 2014 HiSilicon Ltd.
  * Copyright (C) 2014 Huawei Ltd.
  *
  * Author: Wang Long <long.wanglong@huawei.com>
@@ -37,7 +37,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hisilicon/hip01.dtsi
index 975d39828405..e17f36bd9006 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hip01.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. HiP01 SoC
+ * HiSilicon Ltd. HiP01 SoC
  *
- * Copyright (c) 2014 Hisilicon Ltd.
+ * Copyright (c) 2014 HiSilicon Ltd.
  * Copyright (c) 2014 Huawei Ltd.
  *
  * Author: Wang Long <long.wanglong@huawei.com>
@@ -35,47 +35,47 @@
 		interrupt-parent = <&gic>;
 		ranges = <0 0x10000000 0x20000000>;
 
-		amba {
+		amba-bus {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
 			ranges;
 
-			uart0: uart@10001000 {
+			uart0: serial@10001000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10001000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 32 4>;
 				status = "disabled";
 			};
 
-			uart1: uart@10002000 {
+			uart1: serial@10002000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10002000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 33 4>;
 				status = "disabled";
 			};
 
-			uart2: uart@10003000 {
+			uart2: serial@10003000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10003000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 34 4>;
 				status = "disabled";
 			};
 
-			uart3: uart@10006000 {
+			uart3: serial@10006000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10006000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 4 4>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hisilicon/hip04-d01.dts
index 9019e0d2ef60..0210064bf6a5 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hisilicon/hip04-d01.dts
@@ -22,8 +22,8 @@
 	};
 
 	soc {
-		uart0: uart@4007000 {
-			status = "ok";
+		uart0: serial@4007000 {
+			status = "okay";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hisilicon/hip04.dtsi
index 4263a9339c2e..2424cc545c9c 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hip04.dtsi
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. HiP04 SoC
+ * HiSilicon Ltd. HiP04 SoC
  *
- * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 HiSilicon Ltd.
  * Copyright (C) 2013-2014 Linaro Ltd.
  *
  * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
@@ -213,7 +213,7 @@
 		};
 
 		sysctrl: sysctrl {
-			compatible = "hisilicon,sysctrl";
+			compatible = "hisilicon,sysctrl", "syscon";
 			reg = <0x3e00000 0x00100000>;
 		};
 
@@ -226,8 +226,8 @@
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x3000000 0x1000>;
 			interrupts = <0 224 4>;
-			clocks = <&clk_50m>, <&clk_50m>;
-			clock-names = "apb_pclk";
+			clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 		};
 
 		arm-pmu {
@@ -250,12 +250,12 @@
 				     <0 79 4>;
 		};
 
-		uart0: uart@4007000 {
+		uart0: serial@4007000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x4007000 0x1000>;
 			interrupts = <0 381 4>;
-			clocks = <&clk_168m>;
-			clock-names = "uartclk";
+			clocks = <&clk_168m>, <&clk_168m>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts
index d55e9cd3b12b..7758c19038f0 100644
--- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
+++ b/arch/arm/boot/dts/hisilicon/hisi-x5hd2-dkb.dts
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
  */
 
 /dts-v1/;
@@ -35,7 +35,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisilicon/hisi-x5hd2.dtsi
index 696e6982a688..dc991ba2a9fb 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisilicon/hisi-x5hd2.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
  */
 
 #include <dt-bindings/clock/hix5hd2-clock.h>
@@ -30,7 +30,7 @@
 		interrupt-parent = <&gic>;
 		ranges = <0 0xf8000000 0x8000000>;
 
-		amba {
+		amba-bus {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
@@ -86,48 +86,48 @@
 				status = "disabled";
 			};
 
-			uart0: uart@b00000 {
+			uart0: serial@b00000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b00000 0x1000>;
 				interrupts = <0 49 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart1: uart@6000 {
+			uart1: serial@6000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00006000 0x1000>;
 				interrupts = <0 50 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart2: uart@b02000 {
+			uart2: serial@b02000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b02000 0x1000>;
 				interrupts = <0 51 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart3: uart@b03000 {
+			uart3: serial@b03000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b03000 0x1000>;
 				interrupts = <0 52 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart4: uart@b04000 {
+			uart4: serial@b04000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xb04000 0x1000>;
 				interrupts = <0 53 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
@@ -370,8 +370,9 @@
 				arm,primecell-periphid = <0x00141805>;
 				reg = <0xa2c000 0x1000>;
 				interrupts = <0 29 4>;
-				clocks = <&clock HIX5HD2_WDG0_RST>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_WDG0_RST>,
+					 <&clock HIX5HD2_WDG0_RST>;
+				clock-names = "wdog_clk", "apb_pclk";
 			};
 		};
 
@@ -381,7 +382,7 @@
 			interrupts = <1 13 0xf01>;
 		};
 
-		l2: l2-cache {
+		l2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a10000 0x100000>;
 			interrupts = <0 15 4>;
@@ -422,7 +423,7 @@
 			interrupts = <0 35 4>;
 			clocks = <&clock HIX5HD2_MMC_CIU_RST>,
 				 <&clock HIX5HD2_MMC_BIU_CLK>;
-			clock-names = "ciu", "biu";
+			clock-names = "biu", "ciu";
 		};
 
 		sd: mmc@1820000 {
@@ -431,7 +432,7 @@
 			interrupts = <0 34 4>;
 			clocks = <&clock HIX5HD2_SD_CIU_RST>,
 				 <&clock HIX5HD2_SD_BIU_CLK>;
-			clock-names = "ciu","biu";
+			clock-names = "biu", "ciu";
 		};
 
 		gmac0: ethernet@1840000 {
@@ -452,14 +453,14 @@
 			status = "disabled";
 		};
 
-		usb0: ehci@1890000 {
+		usb0: usb@1890000 {
 			compatible = "generic-ehci";
 			reg = <0x1890000 0x1000>;
 			interrupts = <0 66 4>;
 			clocks = <&clock HIX5HD2_USB_CLK>;
 		};
 
-		usb1: ohci@1880000 {
+		usb1: usb@1880000 {
 			compatible = "generic-ohci";
 			reg = <0x1880000 0x1000>;
 			interrupts = <0 67 4>;
@@ -467,7 +468,7 @@
 		};
 
 		peripheral_ctrl: syscon@a20000 {
-			compatible = "syscon";
+			compatible = "hisilicon,peri-subctrl", "syscon";
 			reg = <0xa20000 0x1000>;
 		};
 
diff --git a/arch/arm/boot/dts/hisilicon/sd5203.dts b/arch/arm/boot/dts/hisilicon/sd5203.dts
new file mode 100644
index 000000000000..69381819e07b
--- /dev/null
+++ b/arch/arm/boot/dts/hisilicon/sd5203.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020 HiSilicon Limited.
+ *
+ * DTS file for Hisilicon SD5203 Board
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Hisilicon SD5203";
+	compatible = "H836ASDJ", "hisilicon,sd5203";
+	interrupt-parent = <&vic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "console=ttyS0,9600 earlycon=uart8250,mmio32,0x1600d000";
+	};
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0 {
+			device_type = "cpu";
+			compatible = "arm,arm926ej-s";
+			reg = <0x0>;
+		};
+	};
+
+	memory@30000000 {
+		device_type = "memory";
+		reg = <0x30000000 0x8000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		vic: interrupt-controller@10130000 {
+			compatible = "snps,dw-apb-ictl";
+			reg = <0x10130000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		refclk125mhz: refclk125mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <125000000>;
+		};
+
+		timer0: timer@16002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16002000 0x1000>;
+			interrupts = <4>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		timer1: timer@16003000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x16003000 0x1000>;
+			interrupts = <5>;
+			clocks = <&refclk125mhz>;
+			clock-names = "apb_pclk";
+		};
+
+		uart0: serial@1600d000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600d000 0x1000>;
+			bus_id = "uart0";
+			clocks = <&refclk125mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <17>;
+		};
+
+		uart1: serial@1600c000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x1600c000 0x1000>;
+			clocks = <&refclk125mhz>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			interrupts = <16>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hpe/Makefile b/arch/arm/boot/dts/hpe/Makefile
new file mode 100644
index 000000000000..e175b1732cdb
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+	hpe-bmc-dl360gen10.dtb
diff --git a/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts
new file mode 100644
index 000000000000..3a7382ce40ef
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/hpe-bmc-dl360gen10.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE DL360Gen10
+ */
+
+/include/ "hpe-gxp.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "hpe,gxp-dl360gen10", "hpe,gxp";
+	model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
+
+	aliases {
+		serial0 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/hpe/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
new file mode 100644
index 000000000000..cf735b3c4f35
--- /dev/null
+++ b/arch/arm/boot/dts/hpe/hpe-gxp.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE GXP
+ */
+
+/dts-v1/;
+/ {
+	model = "Hewlett Packard Enterprise GXP BMC";
+	compatible = "hpe,gxp";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	clocks {
+		pll: clock-0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1600000000>;
+		};
+
+		iopclk: clock-1 {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges;
+
+		L2: cache-controller@b0040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0040000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ahb@c0000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000000 0x30000000>;
+			dma-ranges;
+
+			vic0: interrupt-controller@eff0000 {
+				compatible = "arm,pl192-vic";
+				reg = <0xeff0000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			vic1: interrupt-controller@80f00000 {
+				compatible = "arm,pl192-vic";
+				reg = <0x80f00000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			uarta: serial@e0 {
+				compatible = "ns16550a";
+				reg = <0xe0 0x8>;
+				interrupts = <17>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartb: serial@e8 {
+				compatible = "ns16550a";
+				reg = <0xe8 0x8>;
+				interrupts = <18>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartc: serial@f0 {
+				compatible = "ns16550a";
+				reg = <0xf0 0x8>;
+				interrupts = <19>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			usb0: usb@efe0000 {
+				compatible = "hpe,gxp-ehci", "generic-ehci";
+				reg = <0xefe0000 0x100>;
+				interrupts = <7>;
+				interrupt-parent = <&vic0>;
+			};
+
+			st: timer@80 {
+				compatible = "hpe,gxp-timer";
+				reg = <0x80 0x16>;
+				interrupts = <0>;
+				interrupt-parent = <&vic0>;
+				clocks = <&iopclk>;
+				clock-names = "iop";
+			};
+
+			usb1: usb@efe0100 {
+				compatible = "hpe,gxp-ohci", "generic-ohci";
+				reg = <0xefe0100 0x110>;
+				interrupts = <6>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
deleted file mode 100644
index 7d4301b22b90..000000000000
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx25-eukrea-mbimxsd25-baseboard.dts"
-
-/ {
-	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
-	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
-
-	cmo_qvga: display {
-		model = "CMO-QVGA";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xcad08b80>;
-		bus-width = <18>;
-		display-timings {
-			native-mode = <&qvga_timings>;
-			qvga_timings: 320x240 {
-				clock-frequency = <6500000>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <30>;
-				hfront-porch = <38>;
-				vback-porch = <20>;
-				vfront-porch = <3>;
-				hsync-len = <15>;
-				vsync-len = <4>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_lcd_3v3: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
-		};
-	};
-};
-
-&lcdc {
-	display = <&cmo_qvga>;
-	fsl,lpccr = <0x00a903ff>;
-	lcd-supply = <&reg_lcd_3v3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
deleted file mode 100644
index 0950eb66d3d9..000000000000
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- */
-
-/dts-v1/;
-#include "imx25.dtsi"
-
-/ {
-	model = "Ka-Ro TX25";
-	compatible = "karo,imx25-tx25", "fsl,imx25";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_fec_phy: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "fec-phy";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 9 0>;
-			enable-active-high;
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
-	};
-};
-
-&iomuxc {
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
-			MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
-			MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
-			MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
-		>;
-	};
-
-	pinctrl_fec: fecgrp {
-		fsl,pins = <
-			MX25_PAD_D11__GPIO_4_9		0x80000000 /* FEC PHY power on pin */
-			MX25_PAD_D13__GPIO_4_7		0x80000000 /* FEC reset */
-			MX25_PAD_FEC_MDC__FEC_MDC	0x80000000
-			MX25_PAD_FEC_MDIO__FEC_MDIO	0x80000000
-			MX25_PAD_FEC_TDATA0__FEC_TDATA0	0x80000000
-			MX25_PAD_FEC_TDATA1__FEC_TDATA1	0x80000000
-			MX25_PAD_FEC_TX_EN__FEC_TX_EN	0x80000000
-			MX25_PAD_FEC_RDATA0__FEC_RDATA0	0x80000000
-			MX25_PAD_FEC_RDATA1__FEC_RDATA1	0x80000000
-			MX25_PAD_FEC_RX_DV__FEC_RX_DV	0x80000000
-			MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	0x80000000
-		>;
-	};
-
-	pinctrl_nfc: nfcgrp {
-		fsl,pins = <
-			MX25_PAD_NF_CE0__NF_CE0		0x80000000
-			MX25_PAD_NFWE_B__NFWE_B		0x80000000
-			MX25_PAD_NFRE_B__NFRE_B		0x80000000
-			MX25_PAD_NFALE__NFALE		0x80000000
-			MX25_PAD_NFCLE__NFCLE		0x80000000
-			MX25_PAD_NFWP_B__NFWP_B		0x80000000
-			MX25_PAD_NFRB__NFRB		0x80000000
-			MX25_PAD_D7__D7			0x80000000
-			MX25_PAD_D6__D6			0x80000000
-			MX25_PAD_D5__D5			0x80000000
-			MX25_PAD_D4__D4			0x80000000
-			MX25_PAD_D3__D3			0x80000000
-			MX25_PAD_D2__D2			0x80000000
-			MX25_PAD_D1__D1			0x80000000
-			MX25_PAD_D0__D0			0x80000000
-		>;
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
-	phy-mode = "rmii";
-	phy-supply = <&reg_fec_phy>;
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-on-flash-bbt;
-	nand-ecc-mode = "hw";
-	nand-bus-width = <8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
deleted file mode 100644
index 52c95248e25d..000000000000
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
+++ /dev/null
@@ -1,97 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pca100";
-	compatible = "phytec,imx27-pca100", "fsl,imx27";
-
-	memory@a0000000 {
-		device_type = "memory";
-		reg = <0xa0000000 0x08000000>; /* 128MB */
-	};
-};
-
-&cspi1 {
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "atmel,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
-
-&iomuxc {
-	imx27-phycard-s-som {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <
-				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
-				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
-				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
-				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
-				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
-				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
-				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
-				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
-				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
-				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
-				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
-				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
-				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
-				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
-				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
-				MX27_PAD_ATA_DATA13__FEC_COL 0x0
-				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
-				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX27_PAD_NFRB__NFRB 0x0
-				MX27_PAD_NFCLE__NFCLE 0x0
-				MX27_PAD_NFWP_B__NFWP_B 0x0
-				MX27_PAD_NFCE_B__NFCE_B 0x0
-				MX27_PAD_NFALE__NFALE 0x0
-				MX27_PAD_NFRE_B__NFRE_B 0x0
-				MX27_PAD_NFWE_B__NFWE_B 0x0
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
deleted file mode 100644
index 3ed2b328f7ef..000000000000
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Armadeus Systems APF28 module";
-	compatible = "armadeus,imx28-apf28", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x300000>;
-				};
-
-				partition@300000 {
-					label = "env";
-					reg = <0x300000 0x80000>;
-				};
-
-				partition@380000 {
-					label = "env2";
-					reg = <0x380000 0x80000>;
-				};
-
-				partition@400000 {
-					label = "dtb";
-					reg = <0x400000 0x80000>;
-				};
-
-				partition@480000 {
-					label = "splash";
-					reg = <0x480000 0x80000>;
-				};
-
-				partition@500000 {
-					label = "kernel";
-					reg = <0x500000 0x800000>;
-				};
-
-				partition@d00000 {
-					label = "rootfs";
-					reg = <0xd00000 0xf300000>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
deleted file mode 100644
index 1b253b47006c..000000000000
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- */
-
-/* APF28Dev is a docking board for the APF28 SOM */
-#include "imx28-apf28.dts"
-
-/ {
-	model = "Armadeus Systems APF28Dev docking/development board";
-	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_apf28dev>;
-
-				hog_pins_apf28dev: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D16__GPIO_1_16
-						MX28_PAD_LCD_D17__GPIO_1_17
-						MX28_PAD_LCD_D18__GPIO_1_18
-						MX28_PAD_LCD_D19__GPIO_1_19
-						MX28_PAD_LCD_D20__GPIO_1_20
-						MX28_PAD_LCD_D21__GPIO_1_21
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_apf28dev: otg-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_16bit_pins_a
-						&lcdif_pins_apf28dev>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <16>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33000033>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <96>;
-							hfront-porch = <96>;
-							vback-porch = <20>;
-							vfront-porch = <21>;
-							hsync-len = <64>;
-							vsync-len = <4>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can0_vcc>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_apf28dev
-					&usb0_id_pins_b>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 23 1>;
-			enable-active-high;
-		};
-
-		reg_can0_vcc: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "can0_vcc";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio0 21 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-
-		pwms = <&pwm 3 191000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
deleted file mode 100644
index 3a184d13887b..000000000000
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ /dev/null
@@ -1,230 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Bluegiga APX4 Development Kit";
-	compatible = "bluegiga,apx4devkit", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x04000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_RDY1__GPIO_0_21
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_JTAG_RTCK__GPIO_4_20
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apx4: lcdif-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-						MX28_PAD_SSP2_SS1__SSP2_D1
-						MX28_PAD_SSP2_SS2__SSP2_D2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_apx4>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <88>;
-							hfront-porch = <40>;
-							vback-porch = <32>;
-							vfront-porch = <13>;
-							hsync-len = <48>;
-							vsync-len = <3>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				pcf8563: rtc@51 {
-					compatible = "phg,pcf8563";
-					reg = <0x51>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_2pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "bluegiga,apx4devkit-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "apx4devkit-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 28 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
deleted file mode 100644
index 85aa1cc3ff66..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ /dev/null
@@ -1,140 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Free Electrons
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Crystalfontz CFA-10036 Board";
-	compatible = "crystalfontz,cfa10036", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				ssd1306_cfa10036: ssd1306-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_cfa10036: leds-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_cfa10036: otg-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY0__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x31c3 /*
-						MX28_PAD_PWM3__GPIO_3_28 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_b>;
-				clock-frequency = <400000>;
-				status = "okay";
-
-				ssd1306: oled@3c {
-					compatible = "solomon,ssd1306fb-i2c";
-					pinctrl-names = "default";
-					pinctrl-0 = <&ssd1306_cfa10036>;
-					reg = <0x3c>;
-					reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-					solomon,height = <32>;
-					solomon,width = <128>;
-					solomon,page-offset = <0>;
-					solomon,com-lrremap;
-					solomon,com-invdir;
-					solomon,com-offset = <32>;
-				};
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_cfa10036>;
-			dr_mode = "peripheral";
-			phy_type = "utmi";
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_cfa10036>;
-
-		power {
-			gpios = <&gpio3 4 1>;
-			default-state = "on";
-		};
-	};
-
-	reg_vddio_sd0: vddio-sd0 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc_pwr_cfa10036>;
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
deleted file mode 100644
index a92b05ef390f..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ /dev/null
@@ -1,428 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Free Electrons
- */
-
-/*
- * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10049 Board";
-	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
-
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2cmux_pins_cfa10049>;
-		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-		i2c-parent = <&i2c1>;
-
-		i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adc0: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			adc1: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-				adc2: nau7802@2a {
-				compatible = "nuvoton,nau7802";
-				reg = <0x2a>;
-				nuvoton,vldo = <3000>;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				compatible = "nxp,pca9555";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pca_pins_cfa10049>;
-				interrupt-parent = <&gpio2>;
-				interrupts = <19 0x2>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10049: usb-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2cmux_pins_cfa10049: i2cmux-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10049: mac0-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pca_pins_cfa10049: pca-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_pins_cfa10049: rotary-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi2_pins_cfa10049: spi2-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_cfa10049: spi3-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPIO_0_24
-						MX28_PAD_GPMI_RESETN__GPIO_0_28
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_ALE__GPIO_0_26
-						MX28_PAD_GPMI_CLE__GPIO_0_27
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				w1_gpio_pins: w1-gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D21__GPIO_1_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-					     &lcdif_pins_cfa10049
-					     &lcdif_pins_cfa10049_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10049>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10049>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-			im-gpios = <&gpio5 4 0 &gpio5 5 0 &gpio5 6 0>;
-		};
-	};
-
-	spi3 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi3_pins_cfa10049>;
-		status = "okay";
-		gpio-sck = <&gpio0 24 0>;
-		gpio-mosi = <&gpio0 28 0>;
-		cs-gpios = <&gpio0 17 0 &gpio0 26 0 &gpio0 27 0>;
-		num-chipselects = <3>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio5: gpio5@0 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <0>;
-			registers-number = <2>;
-			spi-max-frequency = <100000>;
-		};
-
-		gpio6: gpio6@1 {
-			compatible = "fairchild,74hc595";
-			gpio-controller;
-			#gpio-cells = <2>;
-			reg = <1>;
-			registers-number = <4>;
-			spi-max-frequency = <100000>;
-		};
-
-		dac0: dh2228@2 {
-			compatible = "rohm,dh2228fv";
-			reg = <2>;
-			spi-max-frequency = <100000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
-
-		rotary_button {
-			label = "rotary_button";
-			gpios = <&gpio3 26 1>;
-			debounce-interval = <10>;
-			linux,code = <28>;
-		};
-	};
-
-	rotary {
-		compatible = "rotary-encoder";
-		pinctrl-names = "default";
-		pinctrl-0 = <&rotary_pins_cfa10049>;
-		gpios = <&gpio3 24 1>, <&gpio3 25 1>;
-		linux,axis = <1>; /* REL_Y */
-		rotary-encoder,relative-axis;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-
-	};
-
-	onewire {
-		compatible = "w1-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&w1_gpio_pins>;
-		status = "okay";
-		gpios = <&gpio1 21 0>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
deleted file mode 100644
index d05c370dfc17..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ /dev/null
@@ -1,161 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * 				  Free Electrons
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10055 Board";
-	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10055: spi2-cfa10055@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-					     &lcdif_pins_cfa10055
-					     &lcdif_pins_cfa10055_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10055>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8357: hx8357@0 {
-			compatible = "himax,hx8357b", "himax,hx8357";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
deleted file mode 100644
index c1060bd5f17f..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Free Electrons
- */
-
-/*
- * The CFA-10055 is an expansion board for the CFA-10036 module and
- * CFA-10037, thus we need to include the CFA-10037 DTS.
- */
-#include "imx28-cfa10037.dts"
-
-/ {
-	model = "Crystalfontz CFA-10056 Board";
-	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10056: spi2-cfa10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_pins_cfa10056: lcdif-10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						&lcdif_pins_cfa10056
-						&lcdif_pins_cfa10056_pullup >;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <32000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <5>;
-							vsync-len = <5>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	spi2 {
-		compatible = "spi-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_pins_cfa10056>;
-		status = "okay";
-		gpio-sck = <&gpio2 16 0>;
-		gpio-mosi = <&gpio2 17 0>;
-		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 5 0>;
-		num-chipselects = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hx8369: hx8369@0 {
-			compatible = "himax,hx8369a", "himax,hx8369";
-			reg = <0>;
-			spi-max-frequency = <100000>;
-			spi-cpol;
-			spi-cpha;
-			gpios-reset = <&gpio3 30 0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
deleted file mode 100644
index 2f7e479dbc74..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2012 Free Electrons
- */
-
-/*
- * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10057 Board";
-	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10057: usb-10057@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10057: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
-					     &lcdif_pins_cfa10057>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hfront-porch = <12>;
-							hback-porch = <2>;
-							vfront-porch = <5>;
-							vback-porch = <3>;
-							hsync-len = <2>;
-							vsync-len = <2>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10057>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
deleted file mode 100644
index 4465fd86785a..000000000000
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ /dev/null
@@ -1,138 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Crystalfontz America, Inc.
- * Copyright 2013 Free Electrons
- */
-
-/*
- * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
- * need to include the CFA-10036 DTS.
- */
-#include "imx28-cfa10036.dts"
-
-/ {
-	model = "Crystalfontz CFA-10058 Board";
-	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10058: usb-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10058: lcdif-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						 &lcdif_pins_cfa10058>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <40>;
-							hfront-porch = <40>;
-							vback-porch = <13>;
-							vfront-porch = <29>;
-							hsync-len = <8>;
-							vsync-len = <8>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb1_vbus: regulator@0 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_pins_cfa10058>;
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 7 1>;
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
deleted file mode 100644
index d451fa018d83..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-485.dts
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 485";
-	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		rs485-red {
-			label = "duckbill:red:rs485";
-			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		};
-
-		rs485-green {
-			label = "duckbill:green:rs485";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
deleted file mode 100644
index bacb846f99e3..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
+++ /dev/null
@@ -1,213 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 EnOcean";
-	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-						MX28_PAD_AUART0_CTS__GPIO_3_2
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				enocean_button: enocean-button@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		enocean-blue {
-			label = "duckbill:blue:enocean";
-			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		};
-
-		enocean-red {
-			label = "duckbill:red:enocean";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-		};
-
-		enocean-green {
-			label = "duckbill:green:enocean";
-			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&enocean_button>;
-
-		enocean {
-			label = "EnOcean";
-			linux,code = <KEY_NEW>;
-			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
deleted file mode 100644
index 0e8be5975709..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
+++ /dev/null
@@ -1,194 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2 SPI";
-	compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
-
-	aliases {
-		ethernet1 = &qca7000;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				qca7000: ethernet@0 {
-					reg = <0>;
-					compatible = "qca,qca7000";
-					pinctrl-names = "default";
-					pinctrl-0 = <&qca7000_pins>;
-					interrupt-parent = <&gpio3>;
-					interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-					spi-cpha;
-					spi-cpol;
-					spi-max-frequency = <8000000>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: led@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				qca7000_pins: qca7000@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
-						MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
-						MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
-						MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
-						MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
-						MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
deleted file mode 100644
index 23fd3036404d..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill-2.dts
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
- */
-
-/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill 2";
-	compatible = "i2se,duckbill-2", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-				non-removable;
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_b
-					&mmc2_cd_cfg &mmc2_sck_cfg_b>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_int_pin: mac0-phy-int@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF0_MCLK__GPIO_3_20
-						MX28_PAD_SAIF0_LRCLK__GPIO_3_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			phy-handle = <&ethphy>;
-			status = "okay";
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ethphy: ethernet-phy@0 {
-					compatible = "ethernet-phy-ieee802.3-c22";
-					reg = <0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&mac0_phy_int_pin>;
-					interrupt-parent = <&gpio0>;
-					interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-					max-speed = <100>;
-				};
-			};
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
deleted file mode 100644
index c666afb12445..000000000000
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>
- * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx28.dtsi"
-
-/ {
-	model = "I2SE Duckbill";
-	compatible = "i2se,duckbill", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_phy_reset_pin: mac0-phy-reset@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins: leds@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
-			dr_mode = "peripheral";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <25>;
-			status = "okay";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins>;
-
-		status-red {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
-		};
-
-		status-green {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
deleted file mode 100644
index 96c1d106bc64..000000000000
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ /dev/null
@@ -1,360 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2012 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "Freescale i.MX28 Evaluation Kit";
-	compatible = "fsl,imx28-evk", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 28 0>;
-	};
-
-	reg_fec_3v3: regulator-fec-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fec-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 15 0>;
-	};
-
-	reg_usb0_vbus: regulator-usb0-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb0_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 9 0>;
-		enable-active-high;
-	};
-
-	reg_usb1_vbus: regulator-usb1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 8 0>;
-		enable-active-high;
-	};
-
-	reg_lcd_3v3: regulator-lcd-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 30 0>;
-		enable-active-high;
-	};
-
-	reg_can_3v3: regulator-can-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "can-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 13 0>;
-		enable-active-high;
-	};
-
-	reg_lcd_5v: regulator-lcd-5v {
-		compatible = "regulator-fixed";
-		regulator-name = "lcd-5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	panel {
-		compatible = "sii,43wvf1g";
-		backlight = <&backlight_display>;
-		dvdd-supply = <&reg_lcd_3v3>;
-		avdd-supply = <&reg_lcd_5v>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
-					     &gpmi_pins_evk>;
-				status = "okay";
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio2 12 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp1: spi@80012000 {
-				compatible = "fsl,imx28-mmc";
-				bus-width = <8>;
-				wp-gpios = <&gpio0 28 0>;
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "sst,sst25vf016b", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP1_CMD__GPIO_2_13
-						MX28_PAD_SSP1_DATA3__GPIO_2_15
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-						MX28_PAD_SSP1_SCK__GPIO_2_12
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_AUART2_TX__GPIO_3_9
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio3_5: led_gpio3_5@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_evk: gpmi-nand-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPMI_CE1N
-						MX28_PAD_GPMI_RDY1__GPMI_READY1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_evk: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_evk>;
-				status = "okay";
-
-				port {
-					display_out: endpoint {
-						remote-endpoint = <&panel_in>;
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-				fsl,ave-ctrl = <4>;
-				fsl,ave-delay = <2>;
-				fsl,settling = <10>;
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				at24@51 {
-					compatible = "atmel,24c32";
-					pagesize = <32>;
-					reg = <0x51>;
-				};
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				uart-has-rtscts;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_id_pins_a>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_fec_3v3>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx28-evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "imx28-evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio3_5>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio3 5 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	backlight_display: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 2 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
deleted file mode 100644
index 0bac72d5351f..000000000000
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ /dev/null
@@ -1,56 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- */
-
-#include "imx28.dtsi"
-
-/ {
-	model = "Aries/DENX M28";
-	compatible = "aries,m28", "denx,m28", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@68 {
-					compatible = "st,m41t62";
-					reg = <0x68>;
-				};
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
deleted file mode 100644
index 91bd6deffee5..000000000000
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "MSR M28CU3";
-	compatible = "msr,m28cu3", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "gpmi-nfc-0-boot";
-					reg = <0x00000000 0x01400000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "gpmi-nfc-general-use";
-					reg = <0x01400000 0x0ec00000>;
-				};
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_a
-					     &mmc2_cd_cfg
-					     &mmc2_sck_cfg_a>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd1>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-						MX28_PAD_PWM4__GPIO_3_29
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_VSYNC__LCD_VSYNC
-						MX28_PAD_LCD_HSYNC__LCD_HSYNC
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_RESET__LCD_RESET
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_gpio: leds-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_MISO__GPIO_2_26
-						MX28_PAD_SSP3_SCK__GPIO_2_24
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ocotp@8002c000 {
-				status = "okay";
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <6410256>;
-							hactive = <320>;
-							vactive = <240>;
-							hback-porch = <38>;
-							hfront-porch = <20>;
-							vback-porch = <15>;
-							vfront-porch = <5>;
-							hsync-len = <30>;
-							vsync-len = <3>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			disable-over-current;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_gpio>;
-
-		user1 {
-			label = "sd0-led";
-			gpios = <&gpio2 26 0>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user2 {
-			label = "sd1-led";
-			gpios = <&gpio2 24 0>;
-			linux,default-trigger = "mmc2";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 29 0>;
-		};
-
-		reg_vddio_sd1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vddio-sd1";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 19 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
deleted file mode 100644
index f3bddc5ada4b..000000000000
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28-m28.dtsi"
-
-/ {
-	model = "Aries/DENX M28EVK";
-	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio3 10 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p80", "jedec,spi-nor";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_AUART2_CTS__GPIO_3_10
-						MX28_PAD_AUART2_RTS__GPIO_3_11
-						MX28_PAD_AUART3_RX__GPIO_3_12
-						MX28_PAD_AUART3_TX__GPIO_3_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_ENABLE__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33260000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <0>;
-							hfront-porch = <256>;
-							vback-porch = <0>;
-							vfront-porch = <45>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				sgtl5000: codec@a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					#sound-dai-cells = <0>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				eeprom: eeprom@51 {
-					compatible = "atmel,24c128";
-					reg = <0x51>;
-					pagesize = <32>;
-				};
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_a>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 4 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-	regulators {
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
-
-		reg_usb0_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 12 0>;
-		};
-
-		reg_usb1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 13 0>;
-		};
-	};
-
-	sound {
-		compatible = "denx,m28evk-sgtl5000",
-			     "fsl,mxs-audio-sgtl5000";
-		model = "m28evk-sgtl5000";
-		saif-controllers = <&saif0 &saif1>;
-		audio-codec = <&sgtl5000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
deleted file mode 100644
index 43be7a6a769b..000000000000
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ /dev/null
@@ -1,166 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-
-/ {
-	model = "SchulerControl GmbH, SC SPS 1";
-	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x08000000>;
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog-gpios@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPIO_0_0
-						MX28_PAD_GPMI_D03__GPIO_0_3
-						MX28_PAD_GPMI_D06__GPIO_0_6
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: spi@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256", "mr25h256";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				eeprom: eeprom@52 {
-					compatible = "atmel,24c64";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_b>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-		};
-	};
-
-	leds {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "gpio-leds";
-		status = "okay";
-
-		led@1 {
-			label = "sps1-1:yellow:user";
-			gpios = <&gpio0 6 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <0>;
-		};
-
-		led@2 {
-			label = "sps1-2:red:user";
-			gpios = <&gpio0 3 0>;
-			linux,default-trigger = "heartbeat";
-			reg = <1>;
-		};
-
-		led@3 {
-			label = "sps1-3:red:user";
-			gpios = <&gpio0 0 0>;
-			default-trigger = "heartbeat";
-			reg = <2>;
-		};
-
-	};
-};
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
deleted file mode 100644
index 097ec35c62d8..000000000000
--- a/arch/arm/boot/dts/imx28-ts4600.dts
+++ /dev/null
@@ -1,74 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2016 Savoir-Faire Linux
- * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
- */
-
-/dts-v1/;
-#include "imx28.dtsi"
-#include "dt-bindings/gpio/gpio.h"
-
-/ {
-
-	model = "Technologic Systems i.MX28 TS-4600";
-	compatible = "technologic,imx28-ts4600", "fsl,imx28";
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x10000000>;   /* 256MB */
-	};
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: spi@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_sck_cfg
-					     &en_sd_pwr>;
-				broken-cd = <1>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-
-				en_sd_pwr: en-sd-pwr@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-		};
-
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	reg_vddio_sd0: regulator-vddio-sd0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vddio-sd0";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		gpio = <&gpio3 28 GPIO_ACTIVE_LOW>;
-	};
-
-};
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
deleted file mode 100644
index 17bd2a97609a..000000000000
--- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
+++ /dev/null
@@ -1,89 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,cpuimx35", "fsl,imx35";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>; /* 128M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio3 2 0>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <0x2 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x48>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX35_PAD_FEC_TX_CLK__FEC_TX_CLK		0x80000000
-				MX35_PAD_FEC_RX_CLK__FEC_RX_CLK		0x80000000
-				MX35_PAD_FEC_RX_DV__FEC_RX_DV		0x80000000
-				MX35_PAD_FEC_COL__FEC_COL		0x80000000
-				MX35_PAD_FEC_RDATA0__FEC_RDATA_0	0x80000000
-				MX35_PAD_FEC_TDATA0__FEC_TDATA_0	0x80000000
-				MX35_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX35_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX35_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX35_PAD_FEC_TX_ERR__FEC_TX_ERR		0x80000000
-				MX35_PAD_FEC_RX_ERR__FEC_RX_ERR		0x80000000
-				MX35_PAD_FEC_CRS__FEC_CRS		0x80000000
-				MX35_PAD_FEC_RDATA1__FEC_RDATA_1	0x80000000
-				MX35_PAD_FEC_TDATA1__FEC_TDATA_1	0x80000000
-				MX35_PAD_FEC_RDATA2__FEC_RDATA_2	0x80000000
-				MX35_PAD_FEC_TDATA2__FEC_TDATA_2	0x80000000
-				MX35_PAD_FEC_RDATA3__FEC_RDATA_3	0x80000000
-				MX35_PAD_FEC_TDATA3__FEC_TDATA_3	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX35_PAD_I2C1_CLK__I2C1_SCL		0x80000000
-				MX35_PAD_I2C1_DAT__I2C1_SDA		0x80000000
-			>;
-		};
-
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
deleted file mode 100644
index b1c11170ac25..000000000000
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx35-eukrea-cpuimx35.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX35";
-	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_bp1>;
-
-		bp1 {
-			label = "BP1";
-			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led1>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx35-eukrea-tlv320aic23";
-		ssi-controller = <&ssi1>;
-		fsl,mux-int-port = <1>;
-		fsl,mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx35-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS	0x80000000
-				MX35_PAD_STXD4__AUDMUX_AUD4_TXD		0x80000000
-				MX35_PAD_SRXD4__AUDMUX_AUD4_RXD		0x80000000
-				MX35_PAD_SCK4__AUDMUX_AUD4_TXC		0x80000000
-			>;
-		};
-
-		pinctrl_bp1: bp1grp {
-			fsl,pins = <MX35_PAD_LD19__GPIO3_25  0x80000000>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-				MX35_PAD_LD18__GPIO3_24			0x80000000 /* CD */
-			>;
-		};
-
-		pinctrl_led1: led1grp {
-			fsl,pins = <MX35_PAD_LD23__GPIO3_29  0x80000000>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg-lcd-3v3 {
-			fsl,pins = <MX35_PAD_D3_CLS__GPIO1_4 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX35_PAD_RXD2__UART2_RXD_MUX		0x1c5
-				MX35_PAD_TXD2__UART2_TXD_MUX		0x1c5
-				MX35_PAD_RTS2__UART2_RTS		0x1c5
-				MX35_PAD_CTS2__UART2_CTS		0x1c5
-			>;
-		};
-	};
-};
-
-&ssi1 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
-	external-vbus-divider;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
deleted file mode 100644
index ddce0a844758..000000000000
--- a/arch/arm/boot/dts/imx35-pdk.dts
+++ /dev/null
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
-// Copyright 2014 Freescale Semiconductor, Inc.
-
-/dts-v1/;
-#include "imx35.dtsi"
-
-/ {
-	model = "Freescale i.MX35 Product Development Kit";
-	compatible = "fsl,imx35-pdk", "fsl,imx35";
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x80000000 0x8000000>,
-		      <0x90000000 0x8000000>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx35-pdk {
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX35_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
-				MX35_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
-				MX35_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
-				MX35_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
-				MX35_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
-				MX35_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX35_PAD_TXD1__UART1_TXD_MUX		0x1c5
-				MX35_PAD_RXD1__UART1_RXD_MUX		0x1c5
-				MX35_PAD_CTS1__UART1_CTS		0x1c5
-				MX35_PAD_RTS1__UART1_RTS		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <16>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
deleted file mode 100644
index a25da415cb02..000000000000
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include "imx50.dtsi"
-
-/ {
-	model = "Freescale i.MX50 Evaluation Kit";
-	compatible = "fsl,imx50-evk", "fsl,imx50";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x80000000>;
-	};
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
-	status = "okay";
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "m25p32", "jedec,spi-nor";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "bootloader";
-			reg = <0x0 0x100000>;
-			read-only;
-		};
-
-		partition@100000 {
-			label = "kernel";
-			reg = <0x100000 0x300000>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx50-evk {
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX50_PAD_CSPI_SCLK__CSPI_SCLK		0x00
-				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
-				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
-				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
-				MX50_PAD_ECSPI1_MOSI__CSPI_SS1		0xf4
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX50_PAD_SSI_RXFS__FEC_MDC		0x80
-				MX50_PAD_SSI_RXC__FEC_MDIO		0x80
-				MX50_PAD_DISP_D0__FEC_TX_CLK		0x80
-				MX50_PAD_DISP_D1__FEC_RX_ERR		0x80
-				MX50_PAD_DISP_D2__FEC_RX_DV		0x80
-				MX50_PAD_DISP_D3__FEC_RDATA_1		0x80
-				MX50_PAD_DISP_D4__FEC_RDATA_0		0x80
-				MX50_PAD_DISP_D5__FEC_TX_EN		0x80
-				MX50_PAD_DISP_D6__FEC_TDATA_1		0x80
-				MX50_PAD_DISP_D7__FEC_TDATA_0		0x80
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX50_PAD_UART1_TXD__UART1_TXD_MUX	0x1e4
-				MX50_PAD_UART1_RXD__UART1_RXD_MUX	0x1e4
-				MX50_PAD_UART1_RTS__UART1_RTS		0x1e4
-				MX50_PAD_UART1_CTS__UART1_CTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
deleted file mode 100644
index ba28ffe06fe2..000000000000
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
- *
- * Based on mx51-babbage.dts
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Armadeus Systems APF51 module";
-	compatible = "armadeus,imx51-apf51", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x20000000>;
-	};
-
-	clocks {
-		osc {
-			clock-frequency = <33554432>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-apf51 {
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
deleted file mode 100644
index 563c1aae8c0c..000000000000
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ /dev/null
@@ -1,217 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Armadeus Systems - <support@armadeus.com>
- */
-
-/* APF51Dev is a docking board for the APF51 SOM */
-#include "imx51-apf51.dts"
-
-/ {
-	model = "Armadeus Systems APF51Dev docking/development board";
-	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
-
-	backlight {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_backlight>;
-		compatible = "gpio-backlight";
-		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		default-on;
-	};
-
-	disp1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		display-timings {
-			lw700 {
-				native-mode;
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp1>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		user-key {
-			label = "user";
-			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			linux,code = <256>; /* BTN_0 */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 25 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
-		   <&gpio3 27 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx51-apf51dev {
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX51_PAD_EIM_EB2__GPIO2_22   0x0C5
-				MX51_PAD_EIM_EB3__GPIO2_23   0x0C5
-				MX51_PAD_EIM_CS4__GPIO2_29   0x100
-				MX51_PAD_NANDF_D13__GPIO3_27 0x0C5
-				MX51_PAD_NANDF_D12__GPIO3_28 0x0C5
-				MX51_PAD_CSPI1_SS0__GPIO4_24 0x0C5
-				MX51_PAD_CSPI1_SS1__GPIO4_25 0x0C5
-				MX51_PAD_GPIO1_2__GPIO1_2    0x0C5
-				MX51_PAD_GPIO1_3__GPIO1_3    0x0C5
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX51_PAD_NANDF_RB3__ECSPI2_MISO		0x185
-				MX51_PAD_NANDF_D15__ECSPI2_MOSI		0x185
-				MX51_PAD_NANDF_RB2__ECSPI2_SCLK		0x185
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D27__I2C2_SCL		0x400001ed
-				MX51_PAD_EIM_D24__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			>;
-		};
-	};
-};
-
-&ipu_di0_disp1 {
-	remote-endpoint = <&display_in>;
-};
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
deleted file mode 100644
index ed6a3ce874b2..000000000000
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ /dev/null
@@ -1,692 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Freescale i.MX51 Babbage Board";
-	compatible = "fsl,imx51-babbage", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x20000000>;
-	};
-
-	ckih1 {
-		clock-frequency = <22579200>;
-	};
-
-	clk_osc: clk-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	clk_osc_gate: clk-osc-gate {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
-		clocks = <&clk_osc>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	clk_audio: clk-audio {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
-		clocks = <&clk_osc_gate>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-	};
-
-	clk_usb: clk-usb {
-		compatible = "gpio-gate-clock";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
-		clocks = <&clk_osc_gate>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-	};
-
-	display1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: dvi {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp1>;
-			};
-		};
-	};
-
-	display2: disp2 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb565";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp2>;
-		status = "disabled";
-		display-timings {
-			native-mode = <&timing1>;
-			timing1: claawvga {
-				clock-frequency = <27000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <40>;
-				hfront-porch = <60>;
-				vback-porch = <10>;
-				vfront-porch = <10>;
-				hsync-len = <20>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp2>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-			linux,code = <KEY_POWER>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led-diagnostic {
-			label = "diagnostic";
-			gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_hub_reset: regulator@0 {
-			compatible = "regulator-fixed";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotgreg>;
-			reg = <0>;
-			regulator-name = "hub_reset";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx51-babbage-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx51-babbage-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <3>;
-	};
-
-	usbphy1: usbphy1 {
-		compatible = "usb-nop-xceiv";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1reg>;
-		clocks = <&clk_usb>;
-		clock-names = "main_clk";
-		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-		vcc-supply = <&vusb_reg>;
-		#phy-cells = <0>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	pmic: mc13892@0 {
-		compatible = "fsl,mc13892";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		spi-max-frequency = <6000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-adc;
-		fsl,mc13xxx-uses-rtc;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1375000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1650000>;
-				regulator-max-microvolt = <1650000>;
-				regulator-boot-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3150000>;
-			};
-
-			vusb_reg: vusb {
-				regulator-boot-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2400000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <2300000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <2900000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	flash: at45db321d@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0x3c0000>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-	phy-reset-duration = <1>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clk_audio>;
-		VDDA-supply = <&vdig_reg>;
-		VDDIO-supply = <&vvideo_reg>;
-	};
-};
-
-&ipu_di0_disp1 {
-	remote-endpoint = <&display0_in>;
-};
-
-&ipu_di1_disp2 {
-	remote-endpoint = <&display1_in>;
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	linux,keymap = <
-		MATRIX_KEY(0, 0, KEY_UP)
-		MATRIX_KEY(0, 1, KEY_DOWN)
-		MATRIX_KEY(0, 2, KEY_VOLUMEDOWN)
-		MATRIX_KEY(0, 3, KEY_HOME)
-		MATRIX_KEY(1, 0, KEY_RIGHT)
-		MATRIX_KEY(1, 1, KEY_LEFT)
-		MATRIX_KEY(1, 2, KEY_ENTER)
-		MATRIX_KEY(1, 3, KEY_VOLUMEUP)
-		MATRIX_KEY(2, 0, KEY_F6)
-		MATRIX_KEY(2, 1, KEY_F8)
-		MATRIX_KEY(2, 2, KEY_F9)
-		MATRIX_KEY(2, 3, KEY_F10)
-		MATRIX_KEY(3, 0, KEY_F1)
-		MATRIX_KEY(3, 1, KEY_F2)
-		MATRIX_KEY(3, 2, KEY_F3)
-		MATRIX_KEY(3, 3, KEY_POWER)
-	>;
-	status = "okay";
-};
-
-&pmu {
-	secure-reg-access;
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_hub_reset>;
-	fsl,usbphy = <&usbphy1>;
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&usbphy0 {
-	vcc-supply = <&vusb_reg>;
-};
-
-&usbotg {
-	dr_mode = "otg";
-	disable-over-current;
-	phy_type = "utmi_wide";
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-babbage {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
-				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
-				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
-				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
-			>;
-		};
-
-		pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
-			>;
-		};
-
-		pinctrl_clk26mhz_osc: clk26mhzoscgrp {
-			fsl,pins = <
-				MX51_PAD_DI1_PIN12__GPIO3_1		0x85
-			>;
-		};
-
-		pinctrl_clk26mhz_usb: clk26mhzusbgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D17__GPIO2_1		0x85
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
-				MX51_PAD_CSPI1_SS1__GPIO4_25		0x85 /* CS1 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-				MX51_PAD_GPIO1_0__GPIO1_0		0x100
-				MX51_PAD_GPIO1_1__GPIO1_1		0x100
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-				MX51_PAD_GPIO1_5__GPIO1_5		0x100 /* WP */
-				MX51_PAD_GPIO1_6__GPIO1_6		0x100 /* CD */
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
-				MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
-				MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
-				MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
-				MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
-				MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
-				MX51_PAD_NANDF_RB2__FEC_COL		0x00000180
-				MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x00000180
-				MX51_PAD_NANDF_D9__FEC_RDATA0		0x00002180
-				MX51_PAD_NANDF_D8__FEC_TDATA0		0x00002004
-				MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
-				MX51_PAD_NANDF_CS3__FEC_MDC		0x00002004
-				MX51_PAD_NANDF_CS4__FEC_TDATA1		0x00002004
-				MX51_PAD_NANDF_CS5__FEC_TDATA2		0x00002004
-				MX51_PAD_NANDF_CS6__FEC_TDATA3		0x00002004
-				MX51_PAD_NANDF_CS7__FEC_TX_EN		0x00002004
-				MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	0x00002180
-				MX51_PAD_NANDF_D11__FEC_RX_DV		0x000020a4
-				MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
-			>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_A27__GPIO2_21		0x5
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D22__GPIO2_6		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D19__I2C1_SCL		0x400001ed
-				MX51_PAD_EIM_D16__I2C1_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
-				MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
-				MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
-				MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
-				MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
-				MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
-				MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
-				MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
-				MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
-				MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
-				MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
-				MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
-				MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
-				MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
-				MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
-				MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
-				MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
-				MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
-				MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
-				MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
-				MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
-				MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
-				MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
-				MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
-				MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
-				MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
-				MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
-			>;
-		};
-
-		pinctrl_ipu_disp2: ipudisp2grp {
-			fsl,pins = <
-				MX51_PAD_DISP2_DAT0__DISP2_DAT0		0x5
-				MX51_PAD_DISP2_DAT1__DISP2_DAT1		0x5
-				MX51_PAD_DISP2_DAT2__DISP2_DAT2		0x5
-				MX51_PAD_DISP2_DAT3__DISP2_DAT3		0x5
-				MX51_PAD_DISP2_DAT4__DISP2_DAT4		0x5
-				MX51_PAD_DISP2_DAT5__DISP2_DAT5		0x5
-				MX51_PAD_DISP2_DAT6__DISP2_DAT6		0x5
-				MX51_PAD_DISP2_DAT7__DISP2_DAT7		0x5
-				MX51_PAD_DISP2_DAT8__DISP2_DAT8		0x5
-				MX51_PAD_DISP2_DAT9__DISP2_DAT9		0x5
-				MX51_PAD_DISP2_DAT10__DISP2_DAT10	0x5
-				MX51_PAD_DISP2_DAT11__DISP2_DAT11	0x5
-				MX51_PAD_DISP2_DAT12__DISP2_DAT12	0x5
-				MX51_PAD_DISP2_DAT13__DISP2_DAT13	0x5
-				MX51_PAD_DISP2_DAT14__DISP2_DAT14	0x5
-				MX51_PAD_DISP2_DAT15__DISP2_DAT15	0x5
-				MX51_PAD_DI2_PIN2__DI2_PIN2		0x5
-				MX51_PAD_DI2_PIN3__DI2_PIN3		0x5
-				MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
-				MX51_PAD_DI_GP4__DI2_PIN15		0x5
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX51_PAD_KEY_ROW0__KEY_ROW0		0xe0
-				MX51_PAD_KEY_ROW1__KEY_ROW1		0xe0
-				MX51_PAD_KEY_ROW2__KEY_ROW2		0xe0
-				MX51_PAD_KEY_ROW3__KEY_ROW3		0xe0
-				MX51_PAD_KEY_COL0__KEY_COL0		0xe8
-				MX51_PAD_KEY_COL1__KEY_COL1		0xe8
-				MX51_PAD_KEY_COL2__KEY_COL2		0xe8
-				MX51_PAD_KEY_COL3__KEY_COL3		0xe8
-			>;
-		};
-
-		pinctrl_pmic: pmicgrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_8__GPIO1_8		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-				MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
-				MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_EIM_D25__UART3_RXD		0x1c5
-				MX51_PAD_EIM_D26__UART3_TXD		0x1c5
-				MX51_PAD_EIM_D27__UART3_RTS		0x1c5
-				MX51_PAD_EIM_D24__UART3_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_CLK__USBH1_CLK		0x80000000
-				MX51_PAD_USBH1_DIR__USBH1_DIR		0x80000000
-				MX51_PAD_USBH1_NXT__USBH1_NXT		0x80000000
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x80000000
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x80000000
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x80000000
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x80000000
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x80000000
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x80000000
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x80000000
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x80000000
-			>;
-		};
-
-		pinctrl_usbh1reg: usbh1reggrp {
-			fsl,pins = <
-				MX51_PAD_EIM_D21__GPIO2_5		0x85
-			>;
-		};
-
-		pinctrl_usbotgreg: usbotgreggrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_7__GPIO1_7		0x85
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
deleted file mode 100644
index aab8d6f137c3..000000000000
--- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-#include "imx51-digi-connectcore-som.dtsi"
-
-/ {
-	model = "Digi ConnectCore CC(W)-MX51 JSK";
-	compatible = "digi,connectcore-ccxmx51-jsk",
-		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-};
-
-&esdhc1 {
-	status = "okay";
-};
-
-&owire {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_owire>;
-	status = "okay";
-};
-
-&pmic {
-	fsl,mc13xxx-uses-rtc;
-
-	regulators {
-		vcoincell_reg: vcoincell {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	disable-over-current;
-	status = "okay";
-};
-
-&iomuxc {
-	imx51-digi-connectcore-jsk {
-		pinctrl_owire: owiregrp {
-			fsl,pins = <
-				MX51_PAD_OWIRE_LINE__OWIRE_LINE		0x40000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
-				MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x1e5
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x1e5
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x1e5
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x1e5
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x1e5
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x1e5
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x1e5
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x1e5
-				MX51_PAD_USBH1_CLK__USBH1_CLK		0x1e5
-				MX51_PAD_USBH1_DIR__USBH1_DIR		0x1e5
-				MX51_PAD_USBH1_NXT__USBH1_NXT		0x1e5
-				MX51_PAD_USBH1_STP__USBH1_STP		0x1e5
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
deleted file mode 100644
index 16addb3a2a1b..000000000000
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ /dev/null
@@ -1,389 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- */
-
-/dts-v1/;
-#include "imx51.dtsi"
-
-/ {
-	model = "Digi ConnectCore CC(W)-MX51";
-	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x08000000>;
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	pmic: mc13892@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mc13892>;
-		compatible = "fsl,mc13892";
-		spi-max-frequency = <16000000>;
-		spi-cs-high;
-		reg = <0>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1225000>;
-				regulator-max-microvolt = <1225000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst { };
-
-			viohi_reg: viohi {
-				regulator-always-on;
-			};
-
-			vpll_reg: vpll {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vdig_reg: vdig {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-always-on;
-			};
-
-			vsd_reg: vsd {
-				regulator-min-microvolt = <3150000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vusb2_reg: vusb2 {
-				regulator-min-microvolt = <2600000>;
-				regulator-max-microvolt = <2600000>;
-				regulator-always-on;
-			};
-
-			vvideo_reg: vvideo {
-				regulator-min-microvolt = <2775000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-always-on;
-			};
-
-			vaudio_reg: vaudio {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vcam_reg: vcam {
-				regulator-min-microvolt = <2750000>;
-				regulator-max-microvolt = <2750000>;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <3150000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vusb_reg: vusb {
-				regulator-always-on;
-			};
-
-			gpo1_reg: gpo1 { };
-
-			gpo2_reg: gpo2 { };
-
-			gpo3_reg: gpo3 { };
-
-			gpo4_reg: gpo4 { };
-
-			pwgt2spi_reg: pwgt2spi {
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	max-frequency = <50000000>;
-	bus-width = <1>;
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cap-sdio-irq;
-	wakeup-source;
-	keep-power-in-suspend;
-	max-frequency = <50000000>;
-	no-1-8-v;
-	non-removable;
-	vmmc-supply = <&gpo4_reg>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "mii";
-	phy-supply = <&gpo3_reg>;
-	/* Pins shared with LCD2, keep status disabled */
-};
-
-&i2c2 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-	clock-frequency = <400000>;
-	scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	mma7455l@1d {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_mma7455l>;
-		compatible = "fsl,mma7455l";
-		reg = <0x1d>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi_wide";
-	disable-over-current;
-	/* Device role is not known, keep status disabled */
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim>;
-	status = "okay";
-
-	lan9221: lan9221@5,0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_lan9221>;
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		reg = <5 0x00000000 0x1000>;
-		fsl,weim-cs-timing = <
-			0x00420081 0x00000000
-			0x32260000 0x00000000
-			0x72080f00 0x00000000
-		>;
-		clocks = <&clks IMX5_CLK_DUMMY>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-		phy-mode = "mii";
-		reg-io-width = <2>;
-		smsc,irq-push-pull;
-		vdd33a-supply = <&gpo2_reg>;
-		vddvario-supply = <&gpo2_reg>;
-	};
-};
-
-&iomuxc {
-	imx51-digi-connectcore-som {
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CLK__SD1_CLK		0x400021d5
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x400020d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
-				MX51_PAD_SD2_CLK__SD2_CLK		0x20d5
-				MX51_PAD_SD2_DATA0__SD2_DATA0		0x20d5
-				MX51_PAD_SD2_DATA1__SD2_DATA1		0x20d5
-				MX51_PAD_SD2_DATA2__SD2_DATA2		0x20d5
-				MX51_PAD_SD2_DATA3__SD2_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_2__I2C2_SCL		0x400001ed
-				MX51_PAD_GPIO1_3__I2C2_SDA		0x400001ed
-			>;
-		};
-
-		pinctrl_i2c2_gpio: i2c2gpiogrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_2__GPIO1_2		0x400001ed
-				MX51_PAD_GPIO1_3__GPIO1_3		0x400001ed
-			>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <
-				MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
-				MX51_PAD_NANDF_D1__NANDF_D1		0x80000000
-				MX51_PAD_NANDF_D2__NANDF_D2		0x80000000
-				MX51_PAD_NANDF_D3__NANDF_D3		0x80000000
-				MX51_PAD_NANDF_D4__NANDF_D4		0x80000000
-				MX51_PAD_NANDF_D5__NANDF_D5		0x80000000
-				MX51_PAD_NANDF_D6__NANDF_D6		0x80000000
-				MX51_PAD_NANDF_D7__NANDF_D7		0x80000000
-				MX51_PAD_NANDF_ALE__NANDF_ALE		0x80000000
-				MX51_PAD_NANDF_CLE__NANDF_CLE		0x80000000
-				MX51_PAD_NANDF_RE_B__NANDF_RE_B		0x80000000
-				MX51_PAD_NANDF_WE_B__NANDF_WE_B		0x80000000
-				MX51_PAD_NANDF_WP_B__NANDF_WP_B		0x80000000
-				MX51_PAD_NANDF_CS0__NANDF_CS0		0x80000000
-				MX51_PAD_NANDF_RB0__NANDF_RB0		0x80000000
-			>;
-		};
-
-		pinctrl_lan9221: lan9221grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_9__GPIO1_9		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_mc13892: mc13892grp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_5__GPIO1_5		0xe5 /* IRQ */
-			>;
-		};
-
-		pinctrl_mma7455l: mma7455lgrp {
-			fsl,pins = <
-				MX51_PAD_GPIO1_7__GPIO1_7		0xe5 /* IRQ1 */
-				MX51_PAD_GPIO1_6__GPIO1_6		0xe5 /* IRQ2 */
-			>;
-		};
-
-		pinctrl_weim: weimgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_DA0__EIM_DA0		0x80000000
-				MX51_PAD_EIM_DA1__EIM_DA1		0x80000000
-				MX51_PAD_EIM_DA2__EIM_DA2		0x80000000
-				MX51_PAD_EIM_DA3__EIM_DA3		0x80000000
-				MX51_PAD_EIM_DA4__EIM_DA4		0x80000000
-				MX51_PAD_EIM_DA5__EIM_DA5		0x80000000
-				MX51_PAD_EIM_DA6__EIM_DA6		0x80000000
-				MX51_PAD_EIM_DA7__EIM_DA7		0x80000000
-				MX51_PAD_EIM_DA8__EIM_DA8		0x80000000
-				MX51_PAD_EIM_DA9__EIM_DA9		0x80000000
-				MX51_PAD_EIM_DA10__EIM_DA10		0x80000000
-				MX51_PAD_EIM_DA11__EIM_DA11		0x80000000
-				MX51_PAD_EIM_DA12__EIM_DA12		0x80000000
-				MX51_PAD_EIM_DA13__EIM_DA13		0x80000000
-				MX51_PAD_EIM_DA14__EIM_DA14		0x80000000
-				MX51_PAD_EIM_DA15__EIM_DA15		0x80000000
-				MX51_PAD_EIM_A16__EIM_A16		0x80000000
-				MX51_PAD_EIM_A17__EIM_A17		0x80000000
-				MX51_PAD_EIM_A18__EIM_A18		0x80000000
-				MX51_PAD_EIM_A19__EIM_A19		0x80000000
-				MX51_PAD_EIM_A20__EIM_A20		0x80000000
-				MX51_PAD_EIM_A21__EIM_A21		0x80000000
-				MX51_PAD_EIM_A22__EIM_A22		0x80000000
-				MX51_PAD_EIM_A23__EIM_A23		0x80000000
-				MX51_PAD_EIM_A24__EIM_A24		0x80000000
-				MX51_PAD_EIM_A25__EIM_A25		0x80000000
-				MX51_PAD_EIM_A26__EIM_A26		0x80000000
-				MX51_PAD_EIM_A27__EIM_A27		0x80000000
-				MX51_PAD_EIM_D16__EIM_D16		0x80000000
-				MX51_PAD_EIM_D17__EIM_D17		0x80000000
-				MX51_PAD_EIM_D18__EIM_D18		0x80000000
-				MX51_PAD_EIM_D19__EIM_D19		0x80000000
-				MX51_PAD_EIM_D20__EIM_D20		0x80000000
-				MX51_PAD_EIM_D21__EIM_D21		0x80000000
-				MX51_PAD_EIM_D22__EIM_D22		0x80000000
-				MX51_PAD_EIM_D23__EIM_D23		0x80000000
-				MX51_PAD_EIM_D24__EIM_D24		0x80000000
-				MX51_PAD_EIM_D25__EIM_D25		0x80000000
-				MX51_PAD_EIM_D26__EIM_D26		0x80000000
-				MX51_PAD_EIM_D27__EIM_D27		0x80000000
-				MX51_PAD_EIM_D28__EIM_D28		0x80000000
-				MX51_PAD_EIM_D29__EIM_D29		0x80000000
-				MX51_PAD_EIM_D30__EIM_D30		0x80000000
-				MX51_PAD_EIM_D31__EIM_D31		0x80000000
-				MX51_PAD_EIM_OE__EIM_OE			0x80000000
-				MX51_PAD_EIM_DTACK__EIM_DTACK		0x80000000
-				MX51_PAD_EIM_LBA__EIM_LBA		0x80000000
-				MX51_PAD_EIM_CS5__EIM_CS5		0x80000000 /* CS5 */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
deleted file mode 100644
index c2a929ba8ceb..000000000000
--- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-#include "imx51.dtsi"
-
-/ {
-	model = "Eukrea CPUIMX51";
-	compatible = "eukrea,cpuimx51", "fsl,imx51";
-
-	memory@90000000 {
-		device_type = "memory";
-		reg = <0x90000000 0x10000000>; /* 256M */
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pcf8563@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-
-	tsc2007: tsc2007@49 {
-		compatible = "ti,tsc2007";
-		gpios = <&gpio4 0 1>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <0x0 0x8>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007_1>;
-		reg = <0x49>;
-		ti,x-plate-ohms = <180>;
-	};
-};
-
-&iomuxc {
-	imx51-eukrea {
-		pinctrl_tsc2007_1: tsc2007grp-1 {
-			fsl,pins = <
-				MX51_PAD_GPIO_NAND__GPIO_NAND 0x1f5
-				MX51_PAD_NANDF_D8__GPIO4_0 0x1f5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX51_PAD_DI_GP3__FEC_TX_ER		0x80000000
-				MX51_PAD_DI2_PIN4__FEC_CRS		0x80000000
-				MX51_PAD_DI2_PIN2__FEC_MDC		0x80000000
-				MX51_PAD_DI2_PIN3__FEC_MDIO		0x80000000
-				MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x80000000
-				MX51_PAD_DI_GP4__FEC_RDATA2		0x80000000
-				MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x80000000
-				MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x80000000
-				MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x80000000
-				MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x80000000
-				MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x80000000
-				MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x80000000
-				MX51_PAD_DISP2_DAT10__FEC_COL		0x80000000
-				MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x80000000
-				MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x80000000
-				MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x80000000
-				MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX51_PAD_SD2_CMD__I2C1_SCL		0x400001ed
-				MX51_PAD_SD2_CLK__I2C1_SDA		0x400001ed
-			>;
-		};
-	};
-};
-
-&nfc {
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
deleted file mode 100644
index b6d931e96a8f..000000000000
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ /dev/null
@@ -1,274 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- */
-
-/dts-v1/;
-#include "imx51-eukrea-cpuimx51.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Eukrea CPUIMX51";
-	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
-
-	clocks {
-		clk24M: can_clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiokeys_1>;
-
-		button-1 {
-			label = "BP1";
-			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-			linux,code = <256>;
-			wakeup-source;
-			linux,input-type = <1>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpioled>;
-
-		led1 {
-			label = "led1";
-			gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_can: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "CAN_RST";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <20000>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "eukrea,asoc-tlv320";
-		eukrea,model = "imx51-eukrea-tlv320aic23";
-		ssi-controller = <&ssi2>;
-		fsl,mux-int-port = <2>;
-		fsl,mux-ext-port = <3>;
-	};
-
-	usbphy1: usbphy1 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-		clock-names = "main_clk";
-		clock-frequency = <19200000>;
-		#phy-cells = <0>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
-	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	can0: can@0 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can>;
-		compatible = "microchip,mcp2515";
-		reg = <0>;
-		clocks = <&clk24M>;
-		spi-max-frequency = <10000000>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		vdd-supply = <&reg_can>;
-	};
-};
-
-&i2c1 {
-	tlv320aic23: codec@1a {
-		compatible = "ti,tlv320aic23";
-		reg = <0x1a>;
-	};
-};
-
-&iomuxc {
-	imx51-eukrea {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0x80000000
-				MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x80000000
-				MX51_PAD_AUD3_BB_CK__AUD3_TXC		0x80000000
-				MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x80000000
-			>;
-		};
-
-
-		pinctrl_can: cangrp {
-			fsl,pins = <
-				MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x80000000	/* nReset */
-				MX51_PAD_GPIO1_1__GPIO1_1		0x80000000	/* IRQ */
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
-				MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
-				MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
-				MX51_PAD_CSPI1_SS0__GPIO4_24		0x80000000 	/* CS0 */
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
-				MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
-				MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
-				MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
-				MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
-				MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
-				MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
-				MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
-			>;
-		};
-
-		pinctrl_uart3_rtscts: uart3rtsctsgrp {
-			fsl,pins = <
-				MX51_PAD_KEY_COL4__UART3_RTS		0x1c5
-				MX51_PAD_KEY_COL5__UART3_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_backlight_1: backlightgrp-1 {
-			fsl,pins = <
-				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1f5
-			>;
-		};
-
-		pinctrl_esdhc1_cd: esdhc1_cd {
-			fsl,pins = <
-				MX51_PAD_GPIO1_0__GPIO1_0 0xd5
-			>;
-		};
-
-		pinctrl_gpiokeys_1: gpiokeysgrp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_D9__GPIO3_31 0x1f5
-			>;
-		};
-
-		pinctrl_gpioled: gpioledgrp-1 {
-			fsl,pins = <
-				MX51_PAD_NANDF_D10__GPIO3_30 0x80000000
-			>;
-		};
-
-		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
-			fsl,pins = <
-				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX51_PAD_USBH1_CLK__USBH1_CLK     0x1e5
-				MX51_PAD_USBH1_DIR__USBH1_DIR     0x1e5
-				MX51_PAD_USBH1_NXT__USBH1_NXT     0x1e5
-				MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
-				MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
-				MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
-				MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
-				MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
-				MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
-				MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
-				MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
-				MX51_PAD_USBH1_STP__USBH1_STP     0x1e5
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1-vbusgrp {
-			fsl,pins = <
-				MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
-			>;
-		};
-	};
-};
-
-&ssi2 {
-	codec-handle = <&tlv320aic23>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	fsl,usbphy = <&usbphy1>;
-	dr_mode = "host";
-	phy_type = "ulpi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "otg";
-	phy_type = "utmi_wide";
-	status = "okay";
-};
-
-&usbphy0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1_vbus>;
-	reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-};
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
deleted file mode 100644
index 9a2e1fde7128..000000000000
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Automotive Reference Design Board";
-	compatible = "fsl,imx53-ard", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>;
-	};
-
-	eim-cs1@f4000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,eim-bus", "simple-bus";
-		reg = <0xf4000000 0x3ff0000>;
-		ranges;
-
-		lan9220@f4000000 {
-			compatible = "smsc,lan9220", "smsc,lan9115";
-			reg = <0xf4000000 0x2000000>;
-			phy-mode = "mii";
-			interrupt-parent = <&gpio2>;
-			interrupts = <31 0x8>;
-			reg-io-width = <4>;
-			/*
-			 * VDD33A and VDDVARIO of LAN9220 are supplied by
-			 * SW4_3V3 of LTC3589.  Before the regulator driver
-			 * for this PMIC is available, we use a fixed dummy
-			 * 3V3 regulator to get LAN9220 driver probing work.
-			 */
-			vdd33a-supply = <&reg_3p3v>;
-			vddvario-supply = <&reg_3p3v>;
-			smsc,irq-push-pull;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		home {
-			label = "Home";
-			gpios = <&gpio5 10 0>;
-			linux,code = <KEY_HOME>;
-			wakeup-source;
-		};
-
-		back {
-			label = "Back";
-			gpios = <&gpio5 11 0>;
-			linux,code = <KEY_BACK>;
-			wakeup-source;
-		};
-
-		program {
-			label = "Program";
-			gpios = <&gpio5 12 0>;
-			linux,code = <KEY_PROGRAM >;
-			wakeup-source;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio5 13 0>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio4 0 0>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-ard {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_1__GPIO1_1             0x80000000
-				MX53_PAD_GPIO_9__GPIO1_9             0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31           0x80000000
-				MX53_PAD_GPIO_10__GPIO4_0            0x80000000
-				MX53_PAD_DISP0_DAT16__GPIO5_10	     0x80000000
-				MX53_PAD_DISP0_DAT17__GPIO5_11       0x80000000
-				MX53_PAD_DISP0_DAT18__GPIO5_12       0x80000000
-				MX53_PAD_DISP0_DAT19__GPIO5_13       0x80000000
-				MX53_PAD_EIM_D16__EMI_WEIM_D_16      0x80000000
-				MX53_PAD_EIM_D17__EMI_WEIM_D_17      0x80000000
-				MX53_PAD_EIM_D18__EMI_WEIM_D_18      0x80000000
-				MX53_PAD_EIM_D19__EMI_WEIM_D_19      0x80000000
-				MX53_PAD_EIM_D20__EMI_WEIM_D_20      0x80000000
-				MX53_PAD_EIM_D21__EMI_WEIM_D_21      0x80000000
-				MX53_PAD_EIM_D22__EMI_WEIM_D_22      0x80000000
-				MX53_PAD_EIM_D23__EMI_WEIM_D_23      0x80000000
-				MX53_PAD_EIM_D24__EMI_WEIM_D_24      0x80000000
-				MX53_PAD_EIM_D25__EMI_WEIM_D_25      0x80000000
-				MX53_PAD_EIM_D26__EMI_WEIM_D_26      0x80000000
-				MX53_PAD_EIM_D27__EMI_WEIM_D_27      0x80000000
-				MX53_PAD_EIM_D28__EMI_WEIM_D_28      0x80000000
-				MX53_PAD_EIM_D29__EMI_WEIM_D_29      0x80000000
-				MX53_PAD_EIM_D30__EMI_WEIM_D_30      0x80000000
-				MX53_PAD_EIM_D31__EMI_WEIM_D_31      0x80000000
-				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 0x80000000
-				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 0x80000000
-				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 0x80000000
-				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 0x80000000
-				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 0x80000000
-				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 0x80000000
-				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 0x80000000
-				MX53_PAD_EIM_OE__EMI_WEIM_OE	     0x80000000
-				MX53_PAD_EIM_RW__EMI_WEIM_RW	     0x80000000
-				MX53_PAD_EIM_CS1__EMI_WEIM_CS_1	     0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_PATA_DATA8__ESDHC1_DAT4	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC1_DAT5	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC1_DAT6	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC1_DAT7	0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts
deleted file mode 100644
index 0e7f071fd10e..000000000000
--- a/arch/arm/boot/dts/imx53-kp-ddc.dts
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-#include "imx53-kp.dtsi"
-
-/ {
-	model = "K+P imx53 DDC";
-	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
-
-	backlight_lcd: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
-		power-supply = <&reg_backlight>;
-		brightness-levels = <0 24 28 32 36
-				     40 44 48 52 56
-				     60 64 68 72 76
-				     80 84 88 92 96 100>;
-		default-brightness-level = <20>;
-	};
-
-	lcd_display: display {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp>;
-
-		port@0 {
-			reg = <0>;
-
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	lcd_panel: lcd-panel {
-		compatible = "koe,tx14d24vm1bpa";
-		backlight = <&backlight_lcd>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	reg_backlight: regulator-backlight {
-		compatible = "regulator-fixed";
-		regulator-name = "backlight-supply";
-		regulator-min-microvolt = <15000000>;
-		regulator-max-microvolt = <15000000>;
-		regulator-always-on;
-	};
-};
-
-&fec {
-	status = "okay";
-};
-
-&i2c3 {
-	adc@48 {
-		compatible = "ti,ads1015";
-		reg = <0x48>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@4 {
-			reg = <4>;
-			ti,gain = <2>;
-			ti,datarate = <4>;
-		};
-
-		channel@6 {
-			reg = <6>;
-			ti,gain = <2>;
-			ti,datarate = <4>;
-		};
-	};
-
-	gpio-expander2@21 {
-		compatible = "nxp,pcf8574";
-		reg = <0x21>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-};
-
-&iomuxc {
-	imx53-kp-ddc {
-		pinctrl_disp: dispgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
-				MX53_PAD_GPIO_1__PWM2_PWMO 0x4
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&pmic {
-	fsl,mc13xxx-uses-touch;
-};
diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi
deleted file mode 100644
index 8b25416a5303..000000000000
--- a/arch/arm/boot/dts/imx53-kp.dtsi
+++ /dev/null
@@ -1,189 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2018
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- */
-
-/dts-v1/;
-#include "imx53-tqma53.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	buzzer {
-		compatible = "pwm-beeper";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_buzzer>;
-		pwms = <&pwm1 0 500000>;
-	};
-
-	gpio-buttons {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiobuttons>;
-
-		button-kalt {
-			label = "Kaltstart";
-			linux,code = <KEY_F6>;
-			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-		};
-
-		button-pwr {
-			label = "PowerFailInterrupt";
-			linux,code = <KEY_F7>;
-			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		led-bus {
-			label = "bus";
-			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-
-		led-error {
-			label = "error";
-			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
-			default-state = "off";
-		};
-
-		led-flash {
-			label = "flash";
-			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	gpio-expander1@22 {
-		compatible = "nxp,pcf8574";
-		reg = <0x22>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	rtc@51 {
-		compatible = "nxp,pcf8563";
-		reg = <0x51>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kp_common>;
-
-	imx53-kp-common {
-		pinctrl_buzzer: buzzergrp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
-			>;
-		};
-
-		pinctrl_gpiobuttons: gpiobuttonsgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
-				MX53_PAD_EIM_D22__GPIO3_22 0x1e4
-			>;
-		};
-
-		pinctrl_kp_common: kpcommongrp {
-			fsl,pins = <
-				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
-				MX53_PAD_GPIO_19__GPIO4_5  0x1e4
-				MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
-				MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
-				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
-				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
-				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
-				MX53_PAD_EIM_D17__GPIO3_17 0x1e4
-				MX53_PAD_EIM_D18__GPIO3_18 0x1e4
-				MX53_PAD_EIM_D21__GPIO3_21 0x1e4
-				MX53_PAD_EIM_D29__GPIO3_29 0x1e4
-				MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
-				MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
-				MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
-				MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
-				MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
-				MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
-			>;
-		};
-
-		pinctrl_leds: ledgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
-				MX53_PAD_EIM_D28__GPIO3_28 0x1d4
-				MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
-				MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
-			>;
-		};
-	};
-};
-
-&pinctrl_uart1 {
-	fsl,pins = <
-		MX53_PAD_EIM_D23__GPIO3_23 0x1e4
-		MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
-		MX53_PAD_EIM_D24__GPIO3_24 0x1e4
-		MX53_PAD_EIM_D25__GPIO3_25 0x1e4
-		MX53_PAD_EIM_D19__GPIO3_19 0x1e4
-		MX53_PAD_EIM_D20__GPIO3_20 0x1e4
-	>;
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbphy0 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
deleted file mode 100644
index fe5e0d308e99..000000000000
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ /dev/null
@@ -1,132 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "Aries/DENX M53";
-	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p2v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-		reg_backlight: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd-supply";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	touchscreen@41 {
-		compatible = "st,stmpe610";
-		reg = <0x41>;
-		id = <0>;
-		blocks = <0x5>;
-		interrupts = <6 0x0>;
-		interrupt-parent = <&gpio7>;
-		irq-trigger = <0x1>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			st,sample-time = <4>;
-			st,mod-12b = <1>;
-			st,ref-sel = <0>;
-			st,adc-freq = <1>;
-			st,ave-ctrl = <3>;
-			st,touch-det-delay = <3>;
-			st,settling = <4>;
-			st,fraction-z = <7>;
-			st,i-drive = <1>;
-		};
-	};
-
-	eeprom: eeprom@50 {
-		compatible = "atmel,24c128";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	rtc: rtc@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31		0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6		0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__I2C2_SDA		0xc0000000
-				MX53_PAD_EIM_EB2__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-			>;
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
deleted file mode 100644
index daab56abe94a..000000000000
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ /dev/null
@@ -1,370 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx53-m53.dtsi"
-
-/ {
-	model = "Aries/DENX M53EVK";
-	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
-
-	display1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp1>;
-
-		display-timings {
-			800x480p60 {
-				native-mode;
-				clock-frequency = <31500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <40>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				vback-porch = <33>;
-				vfront-porch = <9>;
-				vsync-len = <3>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 3000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		power-supply = <&reg_backlight>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio>;
-
-		user1 {
-			label = "user1";
-			gpios = <&gpio2 8 0>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		user2 {
-			label = "user2";
-			gpios = <&gpio2 9 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usbh1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 2 0>;
-		};
-
-		reg_usb_otg_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 4 0>;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-m53evk-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-m53evk-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT",
-			"Ext Spk", "LINE_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <4>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		pinctrl_usb: usbgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_2__GPIO1_2		0x80000000
-				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x80000000
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4		0x000b0
-			>;
-		};
-
-		led_pin_gpio: led_gpio {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
-				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x80000000
-				MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x80000000
-				MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x80000000
-				MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_disp1: ipudisp1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0	0x5
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1	0x5
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2	0x5
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3	0x5
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4	0x5
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5	0x5
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6	0x5
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7	0x5
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8	0x5
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9	0x5
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10	0x5
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11	0x5
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12	0x5
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13	0x5
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14	0x5
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15	0x5
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16	0x5
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17	0x5
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18	0x5
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19	0x5
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20	0x5
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21	0x5
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22	0x5
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23	0x5
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK	0x5
-				MX53_PAD_EIM_DA13__IPU_DI1_D0_CS	0x5
-				MX53_PAD_EIM_DA14__IPU_DI1_D1_CS	0x5
-				MX53_PAD_EIM_DA15__IPU_DI1_PIN1		0x5
-				MX53_PAD_EIM_DA11__IPU_DI1_PIN2		0x5
-				MX53_PAD_EIM_DA12__IPU_DI1_PIN3		0x5
-				MX53_PAD_EIM_A25__IPU_DI1_PIN12		0x5
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15	0x5
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX53_PAD_DISP0_DAT8__PWM1_PWMO		0x5
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb>;
-	vbus-supply = <&reg_usbh1_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	dr_mode = "otg";
-	vbus-supply = <&reg_usb_otg_vbus>;
-	disable-over-current;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
deleted file mode 100644
index 719ed5ca454a..000000000000
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ /dev/null
@@ -1,492 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-#include "imx53-m53.dtsi"
-
-/ {
-	model = "MENLO M53 EMBEDDED DEVICE";
-	compatible = "menlo,m53menlo", "fsl,imx53";
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pinctrl_power_button>;
-		pinctrl-names = "default";
-
-		power-button {
-			label = "Power button";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-0 = <&pinctrl_power_out>;
-		pinctrl-names = "default";
-		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		user1 {
-			label = "TestLed601";
-			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-		};
-
-		user2 {
-			label = "TestLed602";
-			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		eth {
-			label = "EthLedYe";
-			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "netdev";
-		};
-	};
-
-	panel {
-		compatible = "edt,etm0700g0dh6";
-		pinctrl-0 = <&pinctrl_display_gpio>;
-		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-
-	beeper {
-		compatible = "gpio-beeper";
-		pinctrl-0 = <&pinctrl_beeper>;
-		gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "okay";
-};
-
-&clks {
-	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
-			  <&clks IMX5_CLK_CKO1_PODF>,
-			  <&clks IMX5_CLK_CKO1>;
-	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
-	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
-};
-
-&ecspi2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio2 27 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	spidev@0 {
-		compatible = "menlo,m53cpld";
-		spi-max-frequency = <25000000>;
-		reg = <0>;
-	};
-
-	spidev@1 {
-		compatible = "menlo,m53cpld";
-		spi-max-frequency = <25000000>;
-		reg = <1>;
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio2 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"TestPin_SV2_3", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
-		"", "CPLD_JTAG_TDO", "", "";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "CPLD_JTAG_TCK", "KBD_intK",
-		"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
-		"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
-		"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
-};
-
-&gpio6 {
-	gpio-line-names =
-		"", "", "", "",
-		"CPLD_reset", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "USB-OTG_OverCurrent", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "",
-		"", "", "", "";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c64";
-		reg = <0x50>;
-		pagesize = <32>;
-	};
-
-	dac@60 {
-		compatible = "microchip,mcp4725";
-		reg = <0x60>;
-	};
-};
-
-&i2c2 {
-	touchscreen@41 {
-		status = "disabled";
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-m53evk {
-		hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_19__CCM_CLKO		0x1e4
-				MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x1e4
-				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1e4
-				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1c4
-				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1e4
-				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1e4
-				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1e4
-				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1c4
-				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1e4
-				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1e4
-				MX53_PAD_PATA_DATA11__GPIO2_11		0x1e4
-				MX53_PAD_EIM_D24__GPIO3_24		0x1e4
-				MX53_PAD_EIM_D25__GPIO3_25		0x1e4
-				MX53_PAD_EIM_D29__GPIO3_29		0x1e4
-				MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x1e4
-				MX53_PAD_CSI0_VSYNC__GPIO5_21		0x1e4
-				MX53_PAD_CSI0_DAT18__GPIO6_4		0x1c4
-				MX53_PAD_PATA_DATA8__GPIO2_8		0x1e4
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1c4
-				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1c4
-			>;
-		};
-
-		pinctrl_beeper: beepergrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT17__GPIO6_3		0x1c4
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1e4
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
-			>;
-		};
-
-		pinctrl_display_gpio: display-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1c4 /* Reset */
-				MX53_PAD_CSI0_MCLK__GPIO5_19		0x1e4 /* Int-K */
-				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1c4 /* Int-I */
-
-				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1c4 /* Power down */
-			>;
-		};
-
-		pinctrl_edt_ft5x06: edt-ft5x06grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA9__GPIO2_9		0x1e4 /* Reset */
-				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1c4 /* Interrupt */
-				MX53_PAD_PATA_DATA10__GPIO2_10		0x1e4 /* Wake */
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_CS0__ECSPI2_SCLK		0xe4
-				MX53_PAD_EIM_OE__ECSPI2_MISO		0xe4
-				MX53_PAD_EIM_CS1__ECSPI2_MOSI		0xe4
-				MX53_PAD_EIM_RW__GPIO2_26		0xe4
-				MX53_PAD_EIM_LBA__GPIO2_27		0xe4
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1e4
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1e4
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1e4
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1e4
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1e4
-				MX53_PAD_GPIO_1__GPIO1_1		0x1c4
-				MX53_PAD_GPIO_9__GPIO1_9		0x1e4
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
-				MX53_PAD_PATA_DA_1__GPIO7_7		0x1e4
-				MX53_PAD_EIM_EB3__GPIO2_31		0x1e4
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
-				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
-				MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
-			>;
-		};
-
-		pinctrl_lvds0: lvds0grp {
-			/* LVDS pins only have pin mux configuration */
-			fsl,pins = <
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
-			>;
-		};
-
-		pinctrl_power_button: powerbutgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
-			>;
-		};
-
-		pinctrl_power_out: poweroutgrp {
-			fsl,pins = <
-				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-				MX53_PAD_PATA_IORDY__UART1_RTS		0x1e4
-				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DIOR__UART2_RTS		0x1e4
-				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-
-		pinctrl_usb: usbgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_2__GPIO1_2		0x1c4
-				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
-				MX53_PAD_GPIO_4__GPIO1_4		0x1c4
-				MX53_PAD_GPIO_18__GPIO7_13		0x1c4
-			>;
-		};
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds0>;
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		reg = <0>;
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		port@2 {
-			reg = <2>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	linux,rs485-enabled-at-boot-time;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb>;
-	vbus-supply = <&reg_usbh1_vbus>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
deleted file mode 100644
index 09eee0dd44c1..000000000000
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ /dev/null
@@ -1,249 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- */
-
-/dts-v1/;
-#include "imx53-tqma53.dtsi"
-
-/ {
-	model = "TQ MBa53 starter kit";
-	compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000>;
-		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
-		default-brightness-level = <10>;
-		enable-gpios = <&gpio7 7 0>;
-		power-supply = <&reg_backlight>;
-	};
-
-	disp1: disp1 {
-		compatible = "fsl,imx-parallel-display";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp1_1>;
-		interface-pix-fmt = "rgb24";
-		status = "disabled";
-
-		port {
-			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
-			};
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_backlight: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "lcd-supply";
-			gpio = <&gpio2 5 0>;
-			startup-delay-us = <5000>;
-		};
-
-		reg_3p2v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-	};
-
-	sound {
-		compatible = "tq,imx53-mba53-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-mba53-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds1_1>;
-	status = "disabled";
-};
-
-&iomuxc {
-	lvds1 {
-		pinctrl_lvds1_1: lvds1-grp1 {
-			fsl,pins = <
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_lvds1_2: lvds1-grp2 {
-			fsl,pins = <
-				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
-				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
-				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
-				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
-				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
-			>;
-		};
-	};
-
-	disp1 {
-		pinctrl_disp1_1: disp1-grp1 {
-			fsl,pins = <
-				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
-				MX53_PAD_EIM_DA10__IPU_DI1_PIN15   0x80000000 /* DISP1_DRDY */
-				MX53_PAD_EIM_D23__IPU_DI1_PIN2     0x80000000 /* DISP1_HSYNC */
-				MX53_PAD_EIM_EB3__IPU_DI1_PIN3     0x80000000 /* DISP1_VSYNC */
-				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
-				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
-				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
-				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
-				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
-				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
-				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
-				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
-				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
-				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
-				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
-				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
-				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
-				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
-				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9  0x80000000
-				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8  0x80000000
-				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7  0x80000000
-				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6  0x80000000
-				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5  0x80000000
-				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4  0x80000000
-				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3  0x80000000
-				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2  0x80000000
-				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1  0x80000000
-				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0  0x80000000
-			>;
-		};
-	};
-
-	tve {
-		pinctrl_vga_sync_1: vgasync-grp1 {
-			fsl,pins = <
-				/* VGA_VSYNC, HSYNC with max drive strength */
-				MX53_PAD_EIM_CS1__IPU_DI1_PIN6	   0xe6
-				MX53_PAD_EIM_DA15__IPU_DI1_PIN4	   0xe6
-			>;
-		};
-	};
-};
-
-&ipu_di1_disp1 {
-	remote-endpoint = <&display1_in>;
-};
-
-&cspi {
-	status = "okay";
-};
-
-&audmux {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-};
-
-&i2c2 {
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-	};
-
-	expander: pca9554@20 {
-		compatible = "pca9554";
-		reg = <0x20>;
-		interrupts = <109>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	sensor2: lm75@49 {
-		compatible = "lm75";
-		reg = <0x49>;
-	};
-};
-
-&fec {
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&esdhc2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&ecspi1 {
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&tve {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_vga_sync_1>;
-	ddc-i2c-bus = <&i2c3>;
-	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <4>;
-	fsl,vsync-pin = <6>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
deleted file mode 100644
index f00dda334976..000000000000
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ /dev/null
@@ -1,381 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-#include "imx53.dtsi"
-
-/ {
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	display0: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb565";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp0>;
-		status = "disabled";
-		display-timings {
-			claawvga {
-				native-mode;
-				clock-frequency = <27000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <40>;
-				hfront-porch = <60>;
-				vback-porch = <10>;
-				vfront-porch = <10>;
-				hsync-len = <20>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-		};
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			wakeup-source;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio7_7>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio7 7 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p2v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P2V";
-			regulator-min-microvolt = <3200000>;
-			regulator-max-microvolt = <3200000>;
-			regulator-always-on;
-		};
-
-		reg_usb_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio7 8 0>;
-			enable-active-high;
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx53-qsb-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-qsb-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-};
-
-&cpu0 {
-	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
-	operating-points = <
-		/* kHz   uV */
-		166666  850000
-		400000  900000
-		800000  1050000
-		1000000 1200000
-	>;
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&ssi2 {
-	status = "okay";
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-qsb {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
-				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
-				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
-				MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
-				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
-				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
-				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
-			>;
-		};
-
-		led_pin_gpio7_7: led_gpio7_7 {
-			fsl,pins = <
-				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_codec: codecgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x4
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
-			>;
-		};
-
-		/* open drain */
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_disp0: ipudisp0grp {
-			fsl,pins = <
-				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
-				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
-				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
-				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
-				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
-				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
-				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
-				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
-				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
-				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
-				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
-				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
-				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
-				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
-				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
-				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
-				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
-				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
-				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
-				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
-				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
-				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
-				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
-				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
-				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
-				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
-				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
-				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
-			>;
-		};
-
-		pinctrl_vga_sync: vgasync-grp {
-			fsl,pins = <
-				/* VGA_HSYNC, VSYNC with max drive strength */
-				MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
-				MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&tve {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_vga_sync>;
-	ddc-i2c-bus = <&i2c2>;
-	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
-	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_codec>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p2v>;
-		VDDIO-supply = <&reg_3p2v>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&vpu {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
deleted file mode 100644
index ec9fb8940ffa..000000000000
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ /dev/null
@@ -1,346 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-//
-// Copyright 2011 Freescale Semiconductor, Inc.
-// Copyright 2011 Linaro Ltd.
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "imx53.dtsi"
-
-/ {
-	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
-	compatible = "fsl,imx53-smd", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		volume-up {
-			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <KEY_VOLUMEUP>;
-		};
-
-		volume-down {
-			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
-};
-
-&esdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	non-removable;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
-	status = "okay";
-
-	zigbee: mc1323@0 {
-		compatible = "fsl,mc1323";
-		spi-max-frequency = <8000000>;
-		reg = <0>;
-	};
-
-	flash: m25p32@1 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <1>;
-
-		partition@0 {
-			label = "U-Boot";
-			reg = <0x0 0x40000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "Kernel";
-			reg = <0x40000 0x3c0000>;
-		};
-	};
-};
-
-&esdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-smd {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
-				MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000
-				MX53_PAD_EIM_EB2__GPIO2_30     0x80000000
-				MX53_PAD_EIM_DA13__GPIO3_13    0x80000000
-				MX53_PAD_EIM_D19__GPIO3_19     0x80000000
-				MX53_PAD_KEY_ROW2__GPIO4_11    0x80000000
-				MX53_PAD_PATA_DA_0__GPIO7_6    0x80000000
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_ipu_csi0: ipucsi0grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12    0x1c4
-				MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13    0x1c4
-				MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14    0x1c4
-				MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15    0x1c4
-				MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16    0x1c4
-				MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17    0x1c4
-				MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18    0x1c4
-				MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19    0x1c4
-				MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
-				MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC   0x1e4
-				MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC    0x1e4
-				MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
-			>;
-		};
-
-		pinctrl_ov5642: ov5642grp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WP_B__GPIO6_9   0x1e4
-				MX53_PAD_NANDF_RB0__GPIO6_10   0x1e4
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
-				MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-	};
-
-	magnetometer: mag3110@e {
-		compatible = "fsl,mag3110";
-		reg = <0x0e>;
-	};
-
-	touchkey: mpr121@5a {
-		compatible = "fsl,mpr121";
-		reg = <0x5a>;
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	accelerometer: mma8450@1c {
-		compatible = "fsl,mma8450";
-		reg = <0x1c>;
-	};
-
-	camera: ov5642@3c {
-		compatible = "ovti,ov5642";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5642>;
-		assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
-				  <&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
-		assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
-					 <&clks IMX5_CLK_SSI_EXT1_PODF>;
-		assigned-clock-rates = <0>, <24000000>;
-		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
-		clock-names = "xclk";
-		DVDD-supply = <&ldo9_reg>;
-		AVDD-supply = <&ldo7_reg>;
-		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
-		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
-
-		port {
-			ov5642_to_ipu_csi0: endpoint {
-				remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
-				bus-width = <8>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-
-	pmic: dialog@48 {
-		compatible = "dlg,da9053", "dlg,da9052";
-		reg = <0x48>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
-		regulators {
-			ldo7_reg: ldo7 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
-			};
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ipu_csi0_from_parallel_sensor {
-	remote-endpoint = <&ov5642_to_ipu_csi0>;
-	data-shift = <12>; /* Lines 19:12 used */
-	hsync-active = <1>;
-	vsync-active = <1>;
-};
-
-&ipu_csi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ipu_csi0>;
-};
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
deleted file mode 100644
index ea90fd95ad01..000000000000
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ /dev/null
@@ -1,281 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "TQ TQMa53";
-	compatible = "tq,tqma53", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>,
-		    <&pinctrl_esdhc2_cdwp>;
-	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "disabled";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "disabled";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
-		   <&gpio3 24 0>, <&gpio3 25 0>;
-	status = "disabled";
-};
-
-&esdhc3 { /* EMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-tqma53 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
-				 MX53_PAD_PATA_DA_1__GPIO7_7     0x80000000 /* LCD_BLT_EN */
-				 MX53_PAD_PATA_DA_2__GPIO7_8     0x80000000 /* LCD_RESET */
-				 MX53_PAD_PATA_DATA5__GPIO2_5    0x80000000 /* LCD_POWER */
-				 MX53_PAD_PATA_DATA6__GPIO2_6    0x80000000 /* PMIC_INT */
-				 MX53_PAD_PATA_DATA14__GPIO2_14  0x80000000 /* CSI_RST */
-				 MX53_PAD_PATA_DATA15__GPIO2_15  0x80000000 /* CSI_PWDN */
-				 MX53_PAD_GPIO_19__GPIO4_5 	 0x80000000 /* #SYSTEM_DOWN */
-				 MX53_PAD_GPIO_3__GPIO1_3        0x80000000
-				 MX53_PAD_PATA_DA_0__GPIO7_6	 0x80000000 /* #PHY_RESET */
-				 MX53_PAD_GPIO_1__PWM2_PWMO	 0x80000000 /* LCD_CONTRAST */
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL2__CAN1_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW2__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_cspi: cspigrp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__CSPI_MISO		0x1d5
-				MX53_PAD_SD1_CMD__CSPI_MOSI		0x1d5
-				MX53_PAD_SD1_CLK__CSPI_SCLK		0x1d5
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_esdhc2_cdwp: esdhc2cdwp {
-			fsl,pins = <
-				MX53_PAD_GPIO_4__GPIO1_4	0x80000000 /* SD2_CD */
-				MX53_PAD_GPIO_2__GPIO1_2	0x80000000 /* SD2_WP */
-			>;
-		};
-
-		pinctrl_esdhc3: esdhc3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
-				MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
-				MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
-				MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
-				MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
-				MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
-				MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
-				MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
-				MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
-				MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-				MX53_PAD_GPIO_5__I2C3_SCL		0xc0000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "disabled";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	status = "disabled";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "disabled";
-};
-
-&cspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cspi>;
-	cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
-		   <&gpio1 21 0>;
-	status = "disabled";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: mc34708@8 {
-		compatible = "fsl,mc34708";
-		reg = <0x8>;
-		fsl,mc13xxx-uses-rtc;
-		interrupt-parent = <&gpio2>;
-		interrupts = <6 4>; /* PATA_DATA6, active high */
-	};
-
-	sensor1: lm75@48 {
-		compatible = "lm75";
-		reg = <0x48>;
-	};
-
-	eeprom: 24c64@50 {
-		compatible = "atmel,24c64";
-		pagesize = <32>;
-		reg = <0x50>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
deleted file mode 100644
index a7f77527269d..000000000000
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx53-tx53.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module (LCD)";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	aliases {
-		display = &display;
-	};
-
-	display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rgb24_vga1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	reg_lcd_pwr: regulator-lcd-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_lcd_reset: regulator-lcd-reset {
-		compatible = "regulator-fixed";
-		regulator-name = "LCD RESET";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
-		wakeup-source;
-	};
-
-	touchscreen: tsc2007@48 {
-		compatible = "ti,tsc2007";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2007>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
-		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
-		ti,x-plate-ohms = <660>;
-		wakeup-source;
-	};
-};
-
-&iomuxc {
-	imx53-tx53-x03x {
-		pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
-			fsl,pins = <
-				MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
-				MX53_PAD_EIM_A16__GPIO2_22   0x04 /* Reset */
-				MX53_PAD_EIM_A17__GPIO2_21   0x04 /* Wake */
-			>;
-		};
-
-		pinctrl_kpp: kppgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
-				MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
-				MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
-				MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
-				MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
-				MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
-				MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
-				MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
-			>;
-		};
-
-		pinctrl_rgb24_vga1: rgb24-vgagrp1 {
-			fsl,pins = <
-				MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK		0x5
-				MX53_PAD_DI0_PIN15__IPU_DI0_PIN15		0x5
-				MX53_PAD_DI0_PIN2__IPU_DI0_PIN2			0x5
-				MX53_PAD_DI0_PIN3__IPU_DI0_PIN3			0x5
-				MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0		0x5
-				MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1		0x5
-				MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2		0x5
-				MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3		0x5
-				MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4		0x5
-				MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5		0x5
-				MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6		0x5
-				MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7		0x5
-				MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8		0x5
-				MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9		0x5
-				MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10		0x5
-				MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11		0x5
-				MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12		0x5
-				MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13		0x5
-				MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14		0x5
-				MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15		0x5
-				MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16		0x5
-				MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17		0x5
-				MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18		0x5
-				MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19		0x5
-				MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20		0x5
-				MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21		0x5
-				MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22		0x5
-				MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23		0x5
-			>;
-		};
-
-		pinctrl_tsc2007: tsc2007grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&ipu_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp>;
-	/* sample keymap */
-	/* row/col 0,1 are mapped to KPP row/col 6,7 */
-	linux,keymap = <
-		MATRIX_KEY(6, 6, KEY_POWER)
-		MATRIX_KEY(6, 7, KEY_KP0)
-		MATRIX_KEY(6, 2, KEY_KP1)
-		MATRIX_KEY(6, 3, KEY_KP2)
-		MATRIX_KEY(7, 6, KEY_KP3)
-		MATRIX_KEY(7, 7, KEY_KP4)
-		MATRIX_KEY(7, 2, KEY_KP5)
-		MATRIX_KEY(7, 3, KEY_KP6)
-		MATRIX_KEY(2, 6, KEY_KP7)
-		MATRIX_KEY(2, 7, KEY_KP8)
-		MATRIX_KEY(2, 2, KEY_KP9)
-	>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
deleted file mode 100644
index 6cdf2082c742..000000000000
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx53-tx53.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module (LVDS)";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		brightness-levels = <
-			  0  1  2  3  4  5  6  7  8  9
-			 10 11 12 13 14 15 16 17 18 19
-			 20 21 22 23 24 25 26 27 28 29
-			 30 31 32 33 34 35 36 37 38 39
-			 40 41 42 43 44 45 46 47 48 49
-			 50 51 52 53 54 55 56 57 58 59
-			 60 61 62 63 64 65 66 67 68 69
-			 70 71 72 73 74 75 76 77 78 79
-			 80 81 82 83 84 85 86 87 88 89
-			 90 91 92 93 94 95 96 97 98 99
-			100
-		>;
-		default-brightness-level = <50>;
-	};
-
-	reg_lcd_pwr0: regulator-lvds0-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LVDS0 POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-
-	reg_lcd_pwr1: regulator-lvds1-pwr {
-		compatible = "regulator-fixed";
-		regulator-name = "LVDS1 POWER";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-boot-on;
-	};
-};
-
-&i2c3 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_gpio>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_2v5>;
-		VDDIO-supply = <&reg_3v3>;
-		clocks = <&mclk>;
-	};
-};
-
-&iomuxc {
-	imx53-tx53-x13x {
-		pinctrl_lvds0: lvds0grp {
-			fsl,pins = <
-				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
-				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
-				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
-				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
-				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_lvds1: lvds1grp {
-			fsl,pins = <
-				MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
-				MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
-				MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
-				MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
-				MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
-		};
-
-		pinctrl_eeti1: eeti1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
-			>;
-		};
-
-		pinctrl_eeti2: eeti2grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&ldb {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds0_timing0>;
-
-			lvds0_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hsync-len = <60>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vsync-len = <10>;
-				vfront-porch = <7>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			lvds0_timing1: nl12880bc20 {
-				clock-frequency = <71000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <50>;
-				hsync-len = <60>;
-				hfront-porch = <50>;
-				vback-porch = <5>;
-				vsync-len = <13>;
-				vfront-porch = <5>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds1_timing0>;
-
-			lvds1_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hsync-len = <60>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vsync-len = <10>;
-				vfront-porch = <7>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
deleted file mode 100644
index 4ab135906949..000000000000
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ /dev/null
@@ -1,596 +0,0 @@
-/*
- * Copyright 2012-2017 <LW@KARO-electronics.de>
- * based on imx53-qsb.dts
- *   Copyright 2011 Freescale Semiconductor, Inc.
- *   Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "imx53.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Ka-Ro electronics TX53 module";
-	compatible = "karo,tx53", "fsl,imx53";
-
-	/* Will be filled by the bootloader */
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0>;
-	};
-
-	aliases {
-		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
-		can1 = &can1;
-		ipu = &ipu;
-		reg-can-xcvr = &reg_can_xcvr;
-		usbh1 = &usbh1;
-		usbotg = &usbotg;
-	};
-
-	clocks {
-		ckih1 {
-			clock-frequency = <0>;
-		};
-	};
-
-	mclk: clock-mclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <26000000>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_key>;
-
-		power {
-			label = "Power Button";
-			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-			linux,code = <116>; /* KEY_POWER */
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_stk5led>;
-
-		user {
-			label = "Heartbeat";
-			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	reg_2v5: regulator-2v5 {
-		compatible = "regulator-fixed";
-		regulator-name = "2V5";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	reg_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_can_xcvr: regulator-can-xcvr {
-		compatible = "regulator-fixed";
-		regulator-name = "CAN XCVR";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_can_xcvr>;
-		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbh1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbh1_vbus>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_usbotg_vbus: regulator-usbotg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usbotg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbotg_vbus>;
-		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
-		model = "tx53-audio-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		/* '1' based port numbers according to datasheet names */
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ssi1>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2>;
-	xceiver-supply = <&reg_can_xcvr>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	cs-gpios = <
-		&gpio2 30 GPIO_ACTIVE_HIGH
-		&gpio3 19 GPIO_ACTIVE_HIGH
-	>;
-
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <54000000>;
-	};
-};
-
-&esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc1>;
-	status = "okay";
-};
-
-&esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
-	phy-handle = <&phy0>;
-	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-			device_type = "ethernet-phy";
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	pinctrl-0 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	rtc1: ds1339@68 {
-		compatible = "dallas,ds1339";
-		reg = <0x68>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ds1339>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
-		trickle-resistor-ohms = <250>;
-		trickle-diode-disable;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-tx53 {
-		pinctrl_hog: hoggrp {
-			/* pins not in use by any device on the Starterkit board series */
-			fsl,pins = <
-				/* CMOS Sensor Interface */
-				MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
-				MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
-				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
-				MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
-				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
-				MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
-				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
-				MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
-				MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
-				MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
-				MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
-				MX53_PAD_GPIO_0__GPIO1_0 0x1f4
-				/* Module Specific Signal */
-				/* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
-				/* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
-				MX53_PAD_EIM_D29__GPIO3_29 0x1f4
-				MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
-				/* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
-				/* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
-				MX53_PAD_EIM_A19__GPIO2_19 0x1f4
-				MX53_PAD_EIM_A20__GPIO2_18 0x1f4
-				MX53_PAD_EIM_A21__GPIO2_17 0x1f4
-				MX53_PAD_EIM_A22__GPIO2_16 0x1f4
-				MX53_PAD_EIM_A23__GPIO6_6 0x1f4
-				MX53_PAD_EIM_A24__GPIO5_4 0x1f4
-				MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
-				MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
-				MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
-				MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
-				/* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
-				/* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
-				MX53_PAD_GPIO_13__GPIO4_3 0x1f4
-				MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
-				MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
-				MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
-				MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
-				MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
-				MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
-				MX53_PAD_EIM_OE__GPIO2_25 0x1f4
-				MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
-				MX53_PAD_EIM_RW__GPIO2_26 0x1f4
-				MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
-				MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
-				MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
-				MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
-				MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
-				MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
-				MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
-				MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
-				>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__CAN1_TXCAN		0x80000000
-				MX53_PAD_GPIO_8__CAN1_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can2: can2grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x80000000
-				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x80000000
-			>;
-		};
-
-		pinctrl_can_xcvr: can-xcvrgrp {
-			fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
-		};
-
-		pinctrl_ds1339: ds1339grp {
-			fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_19__ECSPI1_RDY		0x80000000
-				MX53_PAD_EIM_EB2__ECSPI1_SS0		0x80000000
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-				MX53_PAD_EIM_D19__ECSPI1_SS1		0x80000000
-			>;
-		};
-
-		pinctrl_esdhc1: esdhc1grp {
-			fsl,pins = <
-				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
-				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
-				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
-				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
-				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
-				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
-				MX53_PAD_EIM_D24__GPIO3_24 0x1f0
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-				MX53_PAD_EIM_D25__GPIO3_25 0x1f0
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_gpio_key: gpio-keygrp {
-			fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
-				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c1_gpio: i2c1-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__GPIO3_21		0x400001e6
-				MX53_PAD_EIM_D28__GPIO3_28		0x400001e6
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__I2C3_SCL		0x400001e4
-				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
-			>;
-		};
-
-		pinctrl_i2c3_gpio: i2c3-gpiogrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__GPIO1_3		0x400001e6
-				MX53_PAD_GPIO_6__GPIO1_6		0x400001e6
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
-				MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
-				MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
-				MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
-				MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
-				MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
-				MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
-				MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_1__PWM2_PWMO		0x80000000
-			>;
-		};
-
-		pinctrl_ssi1: ssi1grp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_ssi2: ssi2grp {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC	0x80000000
-				MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD	0x80000000
-				MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS	0x80000000
-				MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD	0x80000000
-				MX53_PAD_EIM_D27__GPIO3_27 0x1f0
-			>;
-		};
-
-		pinctrl_stk5led: stk5ledgrp {
-			fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1c5
-				MX53_PAD_PATA_IORDY__UART1_RTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1c5
-				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1c5
-				MX53_PAD_PATA_DIOR__UART2_RTS		0x1c5
-				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1c5
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
-				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
-				MX53_PAD_PATA_DA_1__UART3_CTS		0x1e4
-				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
-			>;
-		};
-
-		pinctrl_usbh1: usbh1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
-			>;
-		};
-
-		pinctrl_usbh1_vbus: usbh1-vbusgrp {
-			fsl,pins = <
-				MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
-			>;
-		};
-
-		pinctrl_usbotg_vbus: usbotg-vbusgrp {
-			fsl,pins = <
-				MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
-				MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
-			>;
-		};
-	};
-};
-
-&ipu {
-	status = "okay";
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <3>;
-};
-
-&sdma {
-	fsl,sdma-ram-script-name = "sdma-imx53.bin";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&ssi2 {
-	status = "disabled";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	phy_type = "utmi";
-	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	phy_type = "utmi";
-	dr_mode = "peripheral";
-	disable-over-current;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
deleted file mode 100644
index ae53d178a683..000000000000
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- */
-
-/dts-v1/;
-#include "imx53-voipac-dmm-668.dtsi"
-
-/ {
-	sound {
-		compatible = "fsl,imx53-voipac-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx53-voipac-sgtl5000";
-		ssi-controller = <&ssi2>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <2>;
-		mux-ext-port = <5>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio>;
-
-		led1 {
-			label = "led-red";
-			gpios = <&gpio3 29 0>;
-			default-state = "off";
-		};
-
-		led2 {
-			label = "led-orange";
-			gpios = <&gpio2 31 0>;
-			default-state = "off";
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-voipac {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* SD2_CD */
-				MX53_PAD_EIM_D25__GPIO3_25	0x80000000
-				/* SD2_WP */
-				MX53_PAD_EIM_A19__GPIO2_19 	0x80000000
-			>;
-		};
-
-		led_pin_gpio: led_gpio {
-			fsl,pins = <
-				MX53_PAD_EIM_D29__GPIO3_29	0x80000000
-				MX53_PAD_EIM_EB3__GPIO2_31	0x80000000
-			>;
-		};
-
-		/* Keyboard controller */
-		pinctrl_kpp_1: kppgrp-1 {
-			fsl,pins = <
-				MX53_PAD_GPIO_9__KPP_COL_6	0xe8
-				MX53_PAD_GPIO_4__KPP_COL_7	0xe8
-				MX53_PAD_KEY_COL2__KPP_COL_2	0xe8
-				MX53_PAD_KEY_COL3__KPP_COL_3	0xe8
-				MX53_PAD_KEY_COL4__KPP_COL_4	0xe8
-				MX53_PAD_GPIO_2__KPP_ROW_6	0xe0
-				MX53_PAD_GPIO_5__KPP_ROW_7	0xe0
-				MX53_PAD_KEY_ROW2__KPP_ROW_2	0xe0
-				MX53_PAD_KEY_ROW3__KPP_ROW_3	0xe0
-				MX53_PAD_KEY_ROW4__KPP_ROW_4	0xe0
-			>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC	0x80000000
-				MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD	0x80000000
-				MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS	0x80000000
-				MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD	0x80000000
-			>;
-		};
-
-		pinctrl_esdhc2: esdhc2grp {
-			fsl,pins = <
-				MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
-				MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
-				MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
-				MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
-				MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
-				MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
-			>;
-		};
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>; /* SSI1 */
-	status = "okay";
-};
-
-&esdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-		clocks = <&clks 150>;
-	};
-};
-
-&kpp {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_kpp_1>;
-	linux,keymap = <
-			0x0203003b	/* KEY_F1 */
-			0x0603003c	/* KEY_F2 */
-			0x0207003d	/* KEY_F3 */
-			0x0607003e	/* KEY_F4 */
-			>;
-	keypad,num-rows = <8>;
-	keypad,num-columns = <1>;
-	status = "okay";
-};
-
-&ssi2 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
deleted file mode 100644
index 289feab42b88..000000000000
--- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- */
-
-#include "imx53.dtsi"
-
-/ {
-	model = "Voipac i.MX53 X53-DMM-668";
-	compatible = "voipac,imx53-dmm-668", "fsl,imx53";
-
-	memory@70000000 {
-		device_type = "memory";
-		reg = <0x70000000 0x20000000>,
-		      <0xb0000000 0x20000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 31 0>; /* PEN */
-			enable-active-high;
-		};
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx53-voipac {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* Make DA9053 regulator functional */
-				MX53_PAD_GPIO_16__GPIO7_11	0x80000000
-				/* FEC Power enable */
-				MX53_PAD_GPIO_11__GPIO4_1	0x80000000
-				/* FEC RST */
-				MX53_PAD_GPIO_12__GPIO4_2	0x80000000
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D16__ECSPI1_SCLK		0x80000000
-				MX53_PAD_EIM_D17__ECSPI1_MISO		0x80000000
-				MX53_PAD_EIM_D18__ECSPI1_MOSI		0x80000000
-			>;
-		};
-
-		pinctrl_fec: fecgrp {
-			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
-				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
-			>;
-		};
-
-		pinctrl_nand: nandgrp {
-			fsl,pins = <
-				MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
-				MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
-				MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
-				MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
-				MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
-				MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
-				MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
-				MX53_PAD_PATA_DATA0__EMI_NANDF_D_0	0xa4
-				MX53_PAD_PATA_DATA1__EMI_NANDF_D_1	0xa4
-				MX53_PAD_PATA_DATA2__EMI_NANDF_D_2	0xa4
-				MX53_PAD_PATA_DATA3__EMI_NANDF_D_3	0xa4
-				MX53_PAD_PATA_DATA4__EMI_NANDF_D_4	0xa4
-				MX53_PAD_PATA_DATA5__EMI_NANDF_D_5	0xa4
-				MX53_PAD_PATA_DATA6__EMI_NANDF_D_6	0xa4
-				MX53_PAD_PATA_DATA7__EMI_NANDF_D_7	0xa4
-			>;
-		};
-	};
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pmic: dialog@48 {
-		compatible = "dlg,da9053-aa", "dlg,da9052";
-		reg = <0x48>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
-
-		regulators {
-			buck1_reg: buck1 {
-				regulator-name = "BUCKCORE";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-			};
-
-			buck2_reg: buck2 {
-				regulator-name = "BUCKPRO";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck3_reg: buck3 {
-				regulator-name = "BUCKMEM";
-				regulator-min-microvolt = <1420000>;
-				regulator-max-microvolt = <1580000>;
-				regulator-always-on;
-			};
-
-			buck4_reg: buck4 {
-				regulator-name = "BUCKPERI";
-				regulator-min-microvolt = <2370000>;
-				regulator-max-microvolt = <2630000>;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-name = "ldo1_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-name = "ldo2_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: ldo3 {
-				regulator-name = "ldo3_3v3";
-				regulator-min-microvolt = <3250000>;
-				regulator-max-microvolt = <3350000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ldo4 {
-				regulator-name = "ldo4_2v775";
-				regulator-min-microvolt = <2770000>;
-				regulator-max-microvolt = <2780000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: ldo5 {
-				regulator-name = "ldo5_3v3";
-				regulator-min-microvolt = <3250000>;
-				regulator-max-microvolt = <3350000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: ldo6 {
-				regulator-name = "ldo6_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: ldo7 {
-				regulator-name = "ldo7_2v75";
-				regulator-min-microvolt = <2700000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: ldo8 {
-				regulator-name = "ldo8_1v8";
-				regulator-min-microvolt = <1750000>;
-				regulator-max-microvolt = <1850000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-name = "ldo9_1v5";
-				regulator-min-microvolt = <1450000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: ldo10 {
-				regulator-name = "ldo10_1v3";
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nand>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts
deleted file mode 100644
index 6632e99fbb68..000000000000
--- a/arch/arm/boot/dts/imx6dl-apf6dev.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-apf6.dtsi"
-#include "imx6qdl-apf6dev.dtsi"
-
-/ {
-	model = "Armadeus APF6 Solo Module on APF6Dev Board";
-	compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
deleted file mode 100644
index b16603f27dce..000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
-	model = "aristainetos2 i.MX6 Dual Lite Board 4";
-	compatible = "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	display0: disp0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu_disp>;
-
-		port@0 {
-			reg = <0>;
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			display_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
-
-&ecspi1 {
-	lcd_panel: display@0 {
-		compatible = "lg,lg4573";
-		spi-max-frequency = <10000000>;
-		reg = <0>;
-		power-on-delay = <10>;
-
-		display-timings {
-			480x800p57 {
-				native-mode;
-				clock-frequency = <27000027>;
-				hactive = <480>;
-				vactive = <800>;
-				hfront-porch = <10>;
-				hback-porch = <59>;
-				hsync-len = <10>;
-				vback-porch = <15>;
-				vfront-porch = <15>;
-				vsync-len = <15>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touch: touch@4b {
-		compatible = "atmel,maxtouch";
-		reg = <0x4b>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
-&iomuxc {
-	pinctrl_ipu_disp: ipudisp1grp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xE1
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0xE1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0xE1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0xE1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0xE1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0xE1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0xE1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0xE1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0xE1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0xE1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0xE1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0xE1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0xE1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0xE1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0xE1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0xe1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0xE1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0xE1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0xE1
-			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0xE1
-			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0xE1
-			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0xE1
-			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0xE1
-			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0xE1
-			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0xE1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
deleted file mode 100644
index abb2a1b9ce08..000000000000
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * support for the imx6 based aristainetos2 board
- *
- * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-aristainetos2.dtsi"
-
-/ {
-	model = "aristainetos2 i.MX6 Dual Lite Board 7";
-	compatible = "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	panel: panel {
-		compatible = "lg,lb070wv8";
-		backlight = <&backlight>;
-		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	touch: touch@4d {
-		compatible = "atmel,maxtouch";
-		reg = <0x4d>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <9 8>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-			lvds0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_lvds0>;
-			};
-		};
-
-		port@4 {
-			reg = <4>;
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
deleted file mode 100644
index 9a5d6c94cca4..000000000000
--- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Copyright 2014-2016 Toradex AG
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6dl.dtsi"
-#include "imx6qdl-colibri.dtsi"
-
-/ {
-	model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
-	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
-		     "fsl,imx6dl";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	aliases {
-		i2c0 = &i2c2;
-		i2c1 = &i2c3;
-	};
-
-	aliases {
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* Fixed crystal dedicated to mcp251x */
-	clk16m: clock-16m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <16000000>;
-		clock-output-names = "clk16m";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
-
-/* Colibri SSP */
-&ecspi4 {
-	status = "okay";
-
-	mcp251x0: mcp251x@0 {
-		compatible = "microchip,mcp2515";
-		reg = <0>;
-		clocks = <&clk16m>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <27 0x2>;
-		spi-max-frequency = <10000000>;
-		status = "okay";
-	};
-};
-
-&hdmi {
-	status = "okay";
-};
-
-/*
- * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
- */
-&i2c3 {
-	status = "okay";
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	status = "okay";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	status = "okay";
-};
-
-&weim {
-	status = "okay";
-
-	/* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */
-	ranges = <0 0 0x08000000 0x02000000
-		  1 0 0x0a000000 0x02000000
-		  2 0 0x0c000000 0x02000000
-		  3 0 0x0e000000 0x02000000>;
-
-	/* SRAM on Colibri nEXT_CS0 */
-	sram@0,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
-		reg = <0 0 0x00010000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
-				      0x00000000 0x04000040 0x00000000>;
-	};
-
-	/* SRAM on Colibri nEXT_CS1 */
-	sram@1,0 {
-		compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram";
-		reg = <1 0 0x00010000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		bank-width = <2>;
-		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
-				      0x00000000 0x04000040 0x00000000>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw551x.dts b/arch/arm/boot/dts/imx6dl-gw551x.dts
deleted file mode 100644
index 82d5f85722ea..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw551x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw551x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
-	compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw553x.dts b/arch/arm/boot/dts/imx6dl-gw553x.dts
deleted file mode 100644
index 59b8afc36e66..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw553x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw553x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
-	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts
deleted file mode 100644
index 21bdfaf8df53..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw560x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw560x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
-	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5903.dts b/arch/arm/boot/dts/imx6dl-gw5903.dts
deleted file mode 100644
index 103261ea9334..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5903.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5903.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
-	compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-gw5904.dts b/arch/arm/boot/dts/imx6dl-gw5904.dts
deleted file mode 100644
index 9c6d3cd3d6a7..000000000000
--- a/arch/arm/boot/dts/imx6dl-gw5904.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
-	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
deleted file mode 100644
index 829654e1835a..000000000000
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ /dev/null
@@ -1,580 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2014 Iain Paton <ipaton0@gmail.com>
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "RIoTboard i.MX6S";
-	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_led>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6-riotboard-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-			mux-int-port = <1>;
-			mux-ext-port = <3>;
-	};
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usbotgvbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&clks {
-	fsl,pmic-stby-poweroff;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&gpio1 {
-	gpio-line-names =
-		"", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
-			"I2C3_SDA", "I2C4_SCL",
-		"I2C4_SDA", "", "", "", "", "", "", "",
-		"", "PWM3", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio3 {
-	gpio-line-names =
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "USB_OTG_VBUS", "",
-		"UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
-};
-
-&gpio4 {
-	gpio-line-names =
-		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
-		"UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
-		"GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
-			"CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
-		"CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
-			"CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
-};
-
-&gpio5 {
-	gpio-line-names =
-		"", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
-			"GPIO5_07",
-		"GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
-			"CSPI2_CS0", "CSPI2_CLK", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&gpio7 {
-	gpio-line-names =
-		"SD3_CD", "SD3_WP", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "",
-		"", "", "", "", "", "", "", "";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	pmic: pf0100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <16 8>;
-		fsl,pmic-stby-poweroff;
-
-		regulators {
-			reg_vddcore: sw1ab {				/* VDDARM_IN */
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_vddsoc: sw1c {				/* VDDSOC_IN */
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_gen_3v3: sw2 {				/* VDDHIGH_IN */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5a: sw3a {				/* NVCC_DRAM, NVCC_RGMII */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5b: sw3b {				/* NVCC_DRAM, NVCC_RGMII */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_vtt: sw4 {				/* MIPI conn */
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_5v_600mA: swbst {				/* not used */
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-			};
-
-			reg_snvs_3v: vsnvs {				/* VDD_SNVS_IN */
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {				/* VREF_DDR */
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			reg_vgen1_1v5: vgen1 {				/* not used */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			reg_vgen2_1v2_eth: vgen2 {			/* pcie ? */
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			reg_vgen3_2v8: vgen3 {				/* not used */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-			};
-			reg_vgen4_1v8: vgen4 {				/* NVCC_SD3 */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen5_2v5_sgtl: vgen5 {			/* Pwr LED & 5V0_delayed enable */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen6_3v3: vgen6 {				/* #V#_DELAYED enable, MIPI */
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c4 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c4>;
-	clocks = <&clks 116>;
-	status = "okay";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbh1 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	imx6-riotboard {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0		/* CAM_MCLK */
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x000b1		/* CS0 */
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x000b1		/* CS1 */
-				MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000b1		/* CS0 */
-				MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1		/* CS0 */
-				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x000b1		/* CS1 */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c4: i2c4grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
-				MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
-			>;
-		};
-
-		pinctrl_led: ledgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* user led0 */
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* user led1 */
-			>;
-		};
-
-		pinctrl_pwm1: pwm1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm2: pwm2grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
-				MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* SD2 CD */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* SD2 WP */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0	/* SD3 CD */
-				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1f0b0	/* SD3 WP */
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x17059	/* SD4 RST (eMMC) */
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
deleted file mode 100644
index 51a9bb9d6bc2..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
deleted file mode 100644
index fc23b4d291a1..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6s-8034.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
deleted file mode 100644
index 9eb2ef17339c..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8034 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	cpus {
-		/delete-node/ cpu@1;
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&pinctrl_usdhc1 {
-	fsl,pins = <
-		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
-		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
-		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
-		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
-		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
-		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
-		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
-	>;
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
deleted file mode 100644
index 4101c6597721..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6s-8035.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
deleted file mode 100644
index a5532ecc18c5..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6S-8035 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	cpus {
-		/delete-node/ cpu@1;
-	};
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
deleted file mode 100644
index 67ed0452f5de..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-801x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
deleted file mode 100644
index d34189fc52d9..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-8033.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
deleted file mode 100644
index 7030b2654bbd..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8033 Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
deleted file mode 100644
index aef5fcc42904..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-801x.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
deleted file mode 100644
index 5342f2f5a8a8..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-811x Module";
-	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
deleted file mode 100644
index c4588fb0bf6f..000000000000
--- a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6dl-tx6u-811x.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
deleted file mode 100644
index 0edd3043d9c1..000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ /dev/null
@@ -1,296 +0,0 @@
-/*
- * Copyright 2014-2017 Toradex AG
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
-	compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-		power-supply = <&reg_3v3_sw>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	reg_pcie_switch: regulator-pcie-switch {
-		compatible = "regulator-fixed";
-		regulator-name = "pcie_switch";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <100000>;
-		enable-active-high;
-		status = "okay";
-	};
-
-	reg_3v3_sw: regulator-3v3-sw {
-		compatible = "regulator-fixed";
-		regulator-name = "3.3V_SW";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	power-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
-&can1 {
-	xceiver-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3_sw>;
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	pcie-switch@58 {
-		compatible = "plx,pex8605";
-		reg = <0x58>;
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	vpcie-supply = <&reg_pcie_switch>;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-/* MMC1 */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
-	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-/* SD1 */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	/*
-	 * Mux the Apalis GPIOs
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
deleted file mode 100644
index b94bb687be6b..000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * Copyright 2014-2017 Toradex AG
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
-	compatible = "toradex,apalis_imx6q-ixora-v1.1",
-		     "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds_ixora>;
-
-		led4-green {
-			label = "LED_4_GREEN";
-			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-		};
-
-		led4-red {
-			label = "LED_4_RED";
-			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-green {
-			label = "LED_5_GREEN";
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-red {
-			label = "LED_5_RED";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-/* MMC1 */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
-	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&iomuxc {
-	/*
-	 * Mux the Apalis GPIOs
-	 */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-
-	pinctrl_leds_ixora: ledsixoragrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
deleted file mode 100644
index 302fd6adc8a7..000000000000
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * Copyright 2014-2017 Toradex AG
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "imx6q.dtsi"
-#include "imx6qdl-apalis.dtsi"
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board";
-	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
-		     "fsl,imx6q";
-
-	aliases {
-		i2c0 = &i2c1;
-		i2c1 = &i2c3;
-		i2c2 = &i2c2;
-		rtc0 = &rtc_i2c;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		wakeup {
-			label = "Wake-Up";
-			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			debounce-interval = <10>;
-			wakeup-source;
-		};
-	};
-
-	lcd_display: disp0 {
-		compatible = "fsl,imx-parallel-display";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
-		status = "okay";
-
-		port@0 {
-			reg = <0>;
-
-			lcd_display_in: endpoint {
-				remote-endpoint = <&ipu1_di1_disp1>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lcd_display_out: endpoint {
-				remote-endpoint = <&lcd_panel_in>;
-			};
-		};
-	};
-
-	panel: panel {
-		/*
-		 * edt,et057090dhu: EDT 5.7" LCD TFT
-		 * edt,et070080dh6: EDT 7.0" LCD TFT
-		 */
-		compatible = "edt,et057090dhu";
-		backlight = <&backlight>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds_ixora>;
-
-		led4-green {
-			label = "LED_4_GREEN";
-			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
-		};
-
-		led4-red {
-			label = "LED_4_RED";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-green {
-			label = "LED_5_GREEN";
-			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led5-red {
-			label = "LED_5_RED";
-			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&backlight {
-	brightness-levels = <0 127 191 223 239 247 251 255>;
-	default-brightness-level = <1>;
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&can2 {
-	status = "okay";
-};
-
-&hdmi {
-	status = "okay";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	status = "okay";
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-	};
-
-	/* M41T0M6 real time clock on carrier board */
-	rtc_i2c: rtc@68 {
-		compatible = "st,m41t0";
-		reg = <0x68>;
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	status = "okay";
-};
-
-&ipu1_di1_disp1 {
-	remote-endpoint = <&lcd_display_in>;
-};
-
-&ldb {
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_reset_moci>;
-	/* active-high meaning opposite of regular PERST# active-low polarity */
-	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	reset-gpio-active-high;
-	status = "okay";
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&pwm2 {
-	status = "okay";
-};
-
-&pwm3 {
-	status = "okay";
-};
-
-&pwm4 {
-	status = "okay";
-};
-
-&reg_usb_otg_vbus {
-	status = "okay";
-};
-
-&reg_usb_host_vbus {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&sound_spdif {
-	status = "okay";
-};
-
-&spdif {
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	status = "okay";
-};
-
-&uart5 {
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	status = "okay";
-};
-
-/* SD1 */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
-	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	/* Mux the Apalis GPIOs */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
-		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
-		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
-		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
-		    >;
-
-	pinctrl_leds_ixora: ledsixoragrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
-			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
-			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts
deleted file mode 100644
index 07a36bb8075b..000000000000
--- a/arch/arm/boot/dts/imx6q-apf6dev.dts
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-apf6.dtsi"
-#include "imx6qdl-apf6dev.dtsi"
-
-/ {
-	model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board";
-	compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
deleted file mode 100644
index 0b40f52268b3..000000000000
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ /dev/null
@@ -1,225 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad Armadillo2 Board";
-	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		debug-led {
-			label = "Heartbeat";
-			gpios = <&gpio3 25 0>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "disabled"; /* gpmi nand conflicts with SD */
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-arm2 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x80000000
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
-				MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3_cdwp: usdhc3cdwp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
-				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
-	vmmc-supply = <&reg_3p3v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3
-		     &pinctrl_usdhc3_cdwp>;
-	status = "okay";
-};
-
-&usdhc4 {
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
deleted file mode 100644
index 9c61e3be2d9a..000000000000
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+)
-/*
- * Copyright (C) 2015 DH electronics GmbH
- * Copyright (C) 2018 Marek Vasut <marex@denx.de>
- */
-
-/dts-v1/;
-
-#include "imx6q-dhcom-som.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)";
-	compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	clk_ext_audio_codec: clock-codec {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"LINE_IN", "Line In Jack",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux_ext>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clk_ext_audio_codec>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>;
-
-	pinctrl_hog: hog-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x400120b0
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x400120b0
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x400120b0
-			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x120b0
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x400120b0
-			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x120b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x120b0
-			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x400120b0
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0
-			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x400120b0
-			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x400120b0
-			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x400120b0
-			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x400120b0
-			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x400120b0
-			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x400120b0
-			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x400120b0
-			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16		0x400120b0
-			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x400120b0
-			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19		0x400120b0
-			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x400120b0
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x400120b0
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x400120b0
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x400120b0
-		>;
-	};
-
-	pinctrl_audmux_ext: audmux-ext-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
-			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
-			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
-			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
-		>;
-	};
-
-	pinctrl_enet_1G: enet-1G-grp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x000b0
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x000b1
-			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x000b1
-		>;
-	};
-
-	pinctrl_pcie: pcie-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1
-		>;
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&usdhc3 {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi b/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
deleted file mode 100644
index 387801dde02e..000000000000
--- a/arch/arm/boot/dts/imx6q-dhcom-som.dtsi
+++ /dev/null
@@ -1,477 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+)
-/*
- * Copyright (C) 2015 DH electronics GmbH
- * Copyright (C) 2018 Marek Vasut <marex@denx.de>
- */
-
-#include "imx6q.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/imx6qdl-clock.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	aliases {
-		mmc0 = &usdhc2;
-		mmc1 = &usdhc3;
-		mmc2 = &usdhc4;
-		mmc3 = &usdhc1;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	reg_3p3v: regulator-3P3V {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio4 11 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "okay";
-
-	flash@0 {	/* S25FL116K */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-		m25p,fast-read;
-	};
-};
-
-&ecspi2 {
-	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "okay";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_100M>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@0 {	/* SMSC LAN8710Ai */
-			reg = <0>;
-			max-speed = <100>;
-			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <1000>;
-			reset-post-delay-us = <1000>;
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic_hw300>;
-		reg = <0x3c>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			sw1_reg: sw1 {
-				regulator-min-microvolt = <787500>;
-				regulator-max-microvolt = <1527272>;
-				lltc,fb-voltage-divider = <100000 110000>;
-				regulator-suspend-mem-microvolt = <1040000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <1885714>;
-				regulator-max-microvolt = <3657142>;
-				lltc,fb-voltage-divider = <100000 28000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3_reg: sw3 {
-				regulator-min-microvolt = <787500>;
-				regulator-max-microvolt = <1527272>;
-				lltc,fb-voltage-divider = <100000 110000>;
-				regulator-suspend-mem-microvolt = <980000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <855571>;
-				regulator-max-microvolt = <1659291>;
-				lltc,fb-voltage-divider = <100000 93100>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo1_reg: ldo1 {
-				regulator-min-microvolt = <3240306>;
-				regulator-max-microvolt = <3240306>;
-				lltc,fb-voltage-divider = <102000 29400>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-min-microvolt = <2484708>;
-				regulator-max-microvolt = <2484708>;
-				lltc,fb-voltage-divider = <100000 41200>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	touchscreen@49 {	/* TSC2004 */
-		compatible = "ti,tsc2004";
-		reg = <0x49>;
-		vio-supply = <&reg_3p3v>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc2004_hw300>;
-		interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
-		status = "disabled";
-	};
-
-	eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	rtc@56 {
-		compatible = "rv3029c2";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_rtc_hw300>;
-		reg = <0x56>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <12 2>;
-	};
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog_base>;
-
-	pinctrl_hog_base: hog-base-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x120b0
-			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x120b0
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x120b0
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x120b0
-			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x120b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
-			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
-			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
-			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
-		>;
-	};
-
-	pinctrl_enet_100M: enet-100M-grp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x000b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x000b1
-			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x120b0
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
-			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_i2c1: i2c1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pmic_hw300: pmic-hw300-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1B0B0
-		>;
-	};
-
-	pinctrl_rtc_hw300: rtc-hw300-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x120B0
-		>;
-	};
-
-	pinctrl_tsc2004_hw300: tsc2004-hw300-grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x120B0
-		>;
-	};
-
-	pinctrl_uart1: uart1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x4001b0b1
-			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x4001b0b1
-			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x4001b0b1
-			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x4001b0b1
-			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x4001b0b1
-		>;
-	};
-
-	pinctrl_uart4: uart4-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5-grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
-			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x4001b0b1
-		>;
-	};
-
-	pinctrl_usbh1: usbh1-grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120B0
-		>;
-	};
-
-	pinctrl_usbotg: usbotg-grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x120B0
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x120B0
-		>;
-	};
-
-	pinctrl_usdhc4: usdhc4-grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-		>;
-	};
-};
-
-&reg_arm {
-	vin-supply = <&sw3_reg>;
-};
-
-&reg_soc {
-	vin-supply = <&sw1_reg>;
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	uart-has-rtscts;
-	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
-	vbus-supply = <&reg_usb_h1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
-	fsl,wp-controller;
-	keep-power-in-suspend;
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	non-removable;
-	bus-width = <8>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
deleted file mode 100644
index 16658b76fc4e..000000000000
--- a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2017
- * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q-display5.dtsi"
-
-&panel {
-	compatible = "tianma,tm070jdhg30";
-};
-
-&ldb {
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
deleted file mode 100644
index f9df207b2778..000000000000
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2013 Data Modul AG
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Data Modul eDM-QMX6 Board";
-	compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	aliases {
-		gpio7 = &stmpe_gpio1;
-		gpio8 = &stmpe_gpio2;
-		stmpe-i2c0 = &stmpe1;
-		stmpe-i2c1 = &stmpe2;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		reg_usb_otg_switch: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_switch";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio7 12 0>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		reg_usb_host1: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_host1_en";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 31 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led-blue {
-			label = "blue";
-			gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led-green {
-			label = "green";
-			gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-pink {
-			label = "pink";
-			gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
-		};
-
-		led-red {
-			label = "red";
-			gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1>;
-	status = "okay";
-};
-
-&ecspi5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi5>;
-	cs-gpios = <&gpio1 12 0>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "m25p80", "jedec,spi-nor";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	phy-supply = <&vgen2_1v2_eth>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2
-		     &pinctrl_stmpe1
-		     &pinctrl_stmpe2
-		     &pinctrl_pfuze>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <20 8>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw2_reg: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw3b_reg: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			sw4_reg: sw4 {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vgen2_1v2_eth: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-			};
-
-			vdd_high_in: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	stmpe1: stmpe1601@40 {
-		compatible = "st,stmpe1601";
-		reg = <0x40>;
-		interrupts = <30 0>;
-		interrupt-parent = <&gpio3>;
-		vcc-supply = <&sw2_reg>;
-		vio-supply = <&sw2_reg>;
-
-		stmpe_gpio1: stmpe_gpio {
-			#gpio-cells = <2>;
-			compatible = "st,stmpe-gpio";
-		};
-	};
-
-	stmpe2: stmpe1601@44 {
-		compatible = "st,stmpe1601";
-		reg = <0x44>;
-		interrupts = <2 0>;
-		interrupt-parent = <&gpio5>;
-		vcc-supply = <&sw2_reg>;
-		vio-supply = <&sw2_reg>;
-
-		stmpe_gpio2: stmpe_gpio {
-			#gpio-cells = <2>;
-			compatible = "st,stmpe-gpio";
-		};
-	};
-
-	temp1: ad7414@4c {
-		compatible = "ad,ad7414";
-		reg = <0x4c>;
-	};
-
-	temp2: ad7414@4d {
-		compatible = "ad,ad7414";
-		reg = <0x4d>;
-	};
-
-	rtc: m41t62@68 {
-		compatible = "st,m41t62";
-		reg = <0x68>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-dmo-edmqmx6 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
-				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
-			>;
-		};
-
-		pinctrl_can1: can1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi5: ecspi5rp-1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
-				MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
-				MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
-				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x100b1
-			>;
-		};
-
-		pinctrl_pfuze: pfuze100grp1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x80000000
-			>;
-		};
-
-		pinctrl_stmpe1: stmpe1grp {
-			fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
-		};
-
-		pinctrl_stmpe2: stmpe2grp {
-			fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_host1>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	vmmc-supply = <&reg_3p3v>;
-	non-removable;
-	bus-width = <8>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
deleted file mode 100644
index ccc2487d47ca..000000000000
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Copyright (C) 2013 Philipp Zabel
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6q.dtsi"
-
-/ {
-	model = "Zealz GK802";
-	compatible = "zealz,imx6q-gk802", "fsl,imx6q";
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		recovery-button {
-			label = "recovery";
-			gpios = <&gpio3 16 1>;
-			linux,code = <KEY_RESTART>;
-			wakeup-source;
-		};
-	};
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-/* Internal I2C */
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	clock-frequency = <100000>;
-	status = "okay";
-
-	/* SDMC DM2016 1024 bit EEPROM + 128 bit OTP */
-	eeprom: dm2016@51 {
-		compatible = "sdmc,dm2016";
-		reg = <0x51>;
-	};
-};
-
-/* External I2C via HDMI */
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6q-gk802 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				/* Recovery button, active-low */
-				MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x100b1
-				/* RTL8192CU enable GPIO, active-low */
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-/* External USB-A port (USBOTG) */
-&usbotg {
-	disable-over-current;
-	status = "okay";
-};
-
-/* Internal USB port (USBH1), connected to RTL8192CU */
-&usbh1 {
-	disable-over-current;
-	status = "okay";
-};
-
-/* External microSD */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
-
-/* Internal microSD */
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	vmmc-supply = <&reg_3p3v>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw551x.dts b/arch/arm/boot/dts/imx6q-gw551x.dts
deleted file mode 100644
index 2c7feeef1b0e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw551x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2014 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw551x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
-	compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw553x.dts b/arch/arm/boot/dts/imx6q-gw553x.dts
deleted file mode 100644
index e9c224cea752..000000000000
--- a/arch/arm/boot/dts/imx6q-gw553x.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2016 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw553x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
-	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts
deleted file mode 100644
index 735f2bbf1439..000000000000
--- a/arch/arm/boot/dts/imx6q-gw560x.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw560x.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
-	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5903.dts b/arch/arm/boot/dts/imx6q-gw5903.dts
deleted file mode 100644
index a182e4cb0e6e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw5903.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5903.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
-	compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
-};
diff --git a/arch/arm/boot/dts/imx6q-gw5904.dts b/arch/arm/boot/dts/imx6q-gw5904.dts
deleted file mode 100644
index ca1e2ae3341e..000000000000
--- a/arch/arm/boot/dts/imx6q-gw5904.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-gw5904.dtsi"
-
-/ {
-	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
-	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
deleted file mode 100644
index b8feadbff967..000000000000
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ /dev/null
@@ -1,382 +0,0 @@
-/*
- * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-sr-som.dtsi"
-#include "imx6qdl-sr-som-brcm.dtsi"
-
-/ {
-	model = "Auvidea H100";
-	compatible = "auvidea,h100", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	aliases {
-		rtc0 = &rtc;
-		rtc1 = &snvs_rtc;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	hdmi_osc: hdmi-osc {
-		compatible = "fixed-clock";
-		clock-output-names = "hdmi-osc";
-		clock-frequency = <27000000>;
-		#clock-cells = <0>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_leds>;
-
-		led0: power {
-			label = "power";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		led1: stream {
-			label = "stream";
-			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-
-		led2: rec {
-			label = "rec";
-			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	reg_hdmi: regulator-hdmi {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
-		regulator-name = "V_HDMI";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usbh1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
-		regulator-name = "USB_H1_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
-		regulator-name = "USB_OTG_VBUS";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	sound-sgtl5000 {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "H100 on-board codec";
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-ext-port = <5>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
-	};
-};
-
-&audmux {
-	status = "okay";
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_i2c1>;
-	status = "okay";
-
-	eeprom: 24c02@51 {
-		compatible = "microchip,24c02", "atmel,24c02";
-		reg = <0x51>;
-	};
-
-	rtc: pcf8523@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-
-	sgtl5000: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-
-	tc358743: tc358743@f {
-		compatible = "toshiba,tc358743";
-		reg = <0x0f>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_h100_tc358743>;
-		clocks = <&hdmi_osc>;
-		clock-names = "refclk";
-		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-		/* IRQ has a wrong pull resistor which renders it useless  */
-
-		port {
-			tc358743_out: endpoint {
-				remote-endpoint = <&mipi_csi2_in>;
-				data-lanes = <1 2 3 4>;
-				clock-lanes = <0>;
-				clock-noncontinuous;
-				link-frequencies = /bits/ 64 <297000000>;
-			};
-		};
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_i2c2>;
-	status = "okay";
-};
-
-&iomuxc {
-	h100 {
-		pinctrl_h100_hdmi: h100-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
-			>;
-		};
-
-		pinctrl_h100_i2c1: h100-i2c1 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_h100_i2c2: h100-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_h100_leds: pinctrl-h100-leds {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
-				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
-				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_sgtl5000: h100-sgtl5000 {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
-				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
-				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
-				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
-			>;
-		};
-
-		pinctrl_h100_tc358743: h100-tc358743 {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_uart2: h100-uart2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
-			>;
-		};
-
-		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2: h100-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-
-		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
-			>;
-		};
-	};
-};
-
-&mipi_csi {
-	status = "okay";
-
-	port {
-		mipi_csi2_in: endpoint {
-			remote-endpoint = <&tc358743_out>;
-			data-lanes = <1 2 3 4>;
-			clock-lanes = <0>;
-			clock-noncontinuous;
-			link-frequencies = /bits/ 64 <297000000>;
-		};
-	};
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_uart2>;
-	status = "okay";
-};
-
-&usbh1 {
-	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
-	status = "okay";
-};
-
-&usbotg {
-	disable-over-current;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
-	vbus-supply = <&reg_usbotg_vbus>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_h100_usdhc2>;
-	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
-	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
deleted file mode 100644
index 81cc346dd149..000000000000
--- a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- */
-
-/dts-v1/;
-
-#include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
-
-/ {
-	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";
-	compatible = "engicam,imx6-icore", "fsl,imx6q";
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <60000000>;
-				hactive = <1280>;
-				vactive = <800>;
-				hback-porch = <40>;
-				hfront-porch = <40>;
-				vback-porch = <10>;
-				vfront-porch = <3>;
-				hsync-len = <80>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
deleted file mode 100644
index 2618eccfe50d..000000000000
--- a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
+++ /dev/null
@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR X11
-/*
- * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
- */
-
-#include "imx6q.dtsi"
-#include "imx6qdl-kontron-samx6i.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Kontron SMARC sAMX6i Quad/Dual";
-	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
-};
-
-/* Quad/Dual SoMs have 3 chip-select signals */
-&ecspi4 {
-	fsl,spi-num-chipselects = <3>;
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio3 29 GPIO_ACTIVE_HIGH>,
-		   <&gpio3 25 GPIO_ACTIVE_HIGH>;
-};
-
-&pinctrl_ecspi4 {
-	fsl,pins = <
-		MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-		MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-		MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-
-		/* SPI4_IMX_CS2# - connected to internal flash */
-		MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
-		/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
-		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
-		/* SPI4_CS3# - connected to  SMARC SPI0_CS1# */
-		MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
-	>;
-};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
deleted file mode 100644
index dc51262e7b2f..000000000000
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-sabrelite.dtsi"
-
-/ {
-	model = "Freescale i.MX6 Quad SABRE Lite Board";
-	compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
-};
-
-&sata {
-	status = "okay";
-};
-
-&ipu1_csi1_from_mipi_vc1 {
-	clock-lanes = <0>;
-	data-lanes = <1 2>;
-};
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
deleted file mode 100644
index 9054c1d58b9d..000000000000
--- a/arch/arm/boot/dts/imx6q-sbc6x.dts
+++ /dev/null
@@ -1,93 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright 2013 Pavel Machek <pavel@denx.de>
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-
-/ {
-	model = "MicroSys sbc6x board";
-	compatible = "microsys,sbc6x", "fsl,imx6q";
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x80000000>;
-	};
-};
-
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	status = "okay";
-};
-
-&iomuxc {
-	imx6q-sbc6x {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
deleted file mode 100644
index ac3050a835e5..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
deleted file mode 100644
index 4ee860b626ff..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ipu2 {
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
deleted file mode 100644
index a773f252816c..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&backlight {
-	pwms = <&pwm2 0 500000 0>;
-	/delete-property/ turn-on-delay-ms;
-};
-
-&can1 {
-	status = "disabled";
-};
-
-&can2 {
-	xceiver-supply = <&reg_3v3>;
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&kpp {
-	status = "disabled";
-};
-
-&lcd_panel {
-	compatible = "edt,etm0700g0edh6";
-};
-
-&reg_can_xcvr {
-	status = "disabled";
-};
-
-&touchscreen {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
deleted file mode 100644
index 0a4daec8d3ad..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1020 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
deleted file mode 100644
index 9ffbb0fe7df8..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1036.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
deleted file mode 100644
index cb2fcb4896c6..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1036.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lcd.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1036 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ds1339 {
-	status = "disabled";
-};
-
-&gpmi {
-	status = "disabled";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&usdhc4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <4>;
-	non-removable;
-	no-1-8-v;
-	fsl,wp-controller;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl_usdhc4: usdhc4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
deleted file mode 100644
index d43a5d8f1749..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1010.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
deleted file mode 100644
index f7b0acb65352..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q.dtsi"
-#include "imx6qdl-tx6.dtsi"
-#include "imx6qdl-tx6-lvds.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
-	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-};
-
-&ipu2 {
-	status = "disabled";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
deleted file mode 100644
index 387edf2b3f96..000000000000
--- a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "imx6q-tx6q-1110.dts"
-#include "imx6qdl-tx6-mb7.dtsi"
-
-/ {
-	model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
deleted file mode 100644
index 7c4ad541c3f5..000000000000
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ /dev/null
@@ -1,953 +0,0 @@
-/*
- * Copyright 2014-2017 Toradex AG
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Toradex Apalis iMX6Q/D Module";
-	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
-
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm4 0 5000000>;
-		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
-		status = "disabled";
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_module_3v3_audio: regulator-module-3v3-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		status = "disabled";
-	};
-
-	/* on module USB hub */
-	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
-		regulator-name = "usb_host_vbus_hub";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <2000>;
-		enable-active-high;
-		status = "okay";
-	};
-
-	reg_usb_host_vbus: regulator-usb-host-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-name = "usb_host_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		vin-supply = <&reg_usb_host_vbus_hub>;
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6q-apalis-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-
-	sound_spdif: sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
-		status = "disabled";
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
-};
-
-/* Apalis SPI1 */
-&ecspi1 {
-	cs-gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	status = "disabled";
-};
-
-/* Apalis SPI2 */
-&ecspi2 {
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi2>;
-	status = "disabled";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy>;
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@7 {
-			interrupt-parent = <&gpio1>;
-			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-			reg = <7>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_ddc>;
-	status = "disabled";
-};
-
-/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "disabled";
-};
-
-/*
- * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
- */
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen3_reg: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_module_3v3_audio>;
-		VDDIO-supply = <&reg_module_3v3>;
-		VDDD-supply = <&vgen4_reg>;
-	};
-
-	/* STMPE811 touch screen controller */
-	stmpe811@41 {
-		compatible = "st,stmpe811";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		reg = <0x41>;
-		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio4>;
-		interrupt-controller;
-		id = <0>;
-		blocks = <0x5>;
-		irq-trigger = <0x1>;
-		/* 3.25 MHz ADC clock speed */
-		st,adc-freq = <1>;
-		/* 12-bit ADC */
-		st,mod-12b = <1>;
-		/* internal ADC reference */
-		st,ref-sel = <0>;
-		/* ADC converstion time: 80 clocks */
-		st,sample-time = <4>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			/* 8 sample average control */
-			st,ave-ctrl = <3>;
-			/* 7 length fractional part in z */
-			st,fraction-z = <7>;
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			/* 1 ms panel driver settling time */
-			st,settling = <3>;
-			/* 5 ms touch detect interrupt delay */
-			st,touch-det-delay = <5>;
-		};
-
-		stmpe_adc {
-			compatible = "st,stmpe-adc";
-			/* forbid to use ADC channels 3-0 (touch) */
-			st,norequest-mask = <0x0F>;
-		};
-	};
-};
-
-/*
- * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
- * board)
- */
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "recovery";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_recovery>;
-	scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "disabled";
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "disabled";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "disabled";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_dte>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4_dte>;
-	fsl,dte-mode;
-	status = "disabled";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5_dte>;
-	fsl,dte-mode;
-	status = "disabled";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "disabled";
-};
-
-/* MMC1 */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>;
-	vqmmc-supply = <&reg_module_3v3>;
-	bus-width = <8>;
-	disable-wp;
-	no-1-8-v;
-	status = "disabled";
-};
-
-/* SD1 */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vqmmc-supply = <&reg_module_3v3>;
-	bus-width = <4>;
-	disable-wp;
-	no-1-8-v;
-	status = "disabled";
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_module_3v3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
-
-&weim {
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_apalis_gpio1: gpio2io04grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio2: gpio2io05grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio3: gpio2io06grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio4: gpio2io07grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio5: gpio6io10grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio6: gpio6io09grp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio7: gpio1io02grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
-		>;
-	};
-
-	pinctrl_apalis_gpio8: gpio1io06grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
-		>;
-	};
-
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
-			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
-			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
-			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
-		>;
-	};
-
-	pinctrl_cam_mclk: cammclkgrp {
-		fsl,pins = <
-			/* CAM sys_mclk */
-			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
-		>;
-	};
-
-	pinctrl_ecspi1: ecspi1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
-			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
-			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
-			/* SPI1 cs */
-			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
-		>;
-	};
-
-	pinctrl_ecspi2: ecspi2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
-			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-			/* SPI2 cs */
-			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			/* Ethernet PHY reset */
-			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
-			/* Ethernet PHY interrupt */
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x000b1
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpioblon {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpio1io04grp {
-		fsl,pins = <
-			/* Power button */
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
-		>;
-	};
-
-	pinctrl_hdmi_cec: hdmicecgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-		>;
-	};
-
-	pinctrl_hdmi_ddc: hdmiddcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_recovery: i2c3recoverygrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
-			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
-			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
-			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
-			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
-			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
-			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
-			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
-			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
-			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
-			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
-			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
-			/* DE */
-			MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61
-			/* HSync */
-			MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61
-			/* VSync */
-			MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61
-			MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
-			MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
-			MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
-			MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
-			MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
-			MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
-			MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
-			MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
-			MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
-			MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
-			MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
-			MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
-			MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
-			MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
-			MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
-			MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
-			MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
-			MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
-			MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
-			MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
-			MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
-			MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
-			MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
-			MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
-		>;
-	};
-
-	pinctrl_ipu2_vdac: ipu2vdacgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
-			MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xd1
-			MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xd1
-			MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xd1
-			MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xf9
-			MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xf9
-			MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xf9
-			MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xf9
-			MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xf9
-			MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xf9
-			MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xf9
-			MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xf9
-			MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xf9
-			MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xf9
-			MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xf9
-			MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xf9
-			MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xf9
-			MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xf9
-			MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xf9
-			MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xf9
-		>;
-	};
-
-	pinctrl_mmc_cd: gpiommccdgrp {
-		fsl,pins = <
-			 /* MMC1 CD */
-			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
-		>;
-	};
-
-	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
-		fsl,pins = <
-			/* USBH_EN */
-			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
-		>;
-	};
-
-	pinctrl_regulator_usbhub_pwr: gpioregusbhubpwrgrp {
-		fsl,pins = <
-			/* USBH_HUB_EN */
-			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
-		>;
-	};
-
-	pinctrl_regulator_usbotg_pwr: gpioregusbotgpwrgrp {
-		fsl,pins = <
-			/* USBO1 power en */
-			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
-		>;
-	};
-
-	pinctrl_reset_moci: gpioresetmocigrp {
-		fsl,pins = <
-			/* RESET_MOCI control */
-			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
-		>;
-	};
-
-	pinctrl_sd_cd: gpiosdcdgrp {
-		fsl,pins = <
-			/* SD1 CD */
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
-			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
-		>;
-	};
-
-	pinctrl_touch_int: gpiotouchintgrp {
-		fsl,pins = <
-			/* STMPE811 interrupt */
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1_dce: uart1dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart1_dte: uart1dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
-		>;
-	};
-
-	/* Additional DTR, DSR, DCD */
-	pinctrl_uart1_ctrl: uart1ctrlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2_dce: uart2dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart2_dte: uart2dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart4_dce: uart4dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart4_dte: uart4dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5_dce: uart5dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart5_dte: uart5dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
-		>;
-	};
-
-	pinctrl_usbotg: usbotggrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
-		>;
-	};
-
-	pinctrl_usdhc1_4bit: usdhc1grp_4bit {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
-			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
-		>;
-	};
-
-	pinctrl_usdhc1_8bit: usdhc1grp_8bit {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
-			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
-			MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
-			MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17071
-			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10071
-			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
-			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
-			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
-			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
deleted file mode 100644
index 4738c3c1ab50..000000000000
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	phy-reset-duration = <10>;
-	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-/* Bluetooth */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-/* Wi-Fi */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	non-removable;
-	status = "okay";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1271";
-		reg = <2>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-		ref-clock-frequency = <38400000>;
-		tcxo-clock-frequency = <38400000>;
-	};
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
-
-&iomuxc {
-	apf6 {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x130b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x13030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1f030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1f030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-			>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b0
-				MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b0
-				MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b0
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b0
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x130b0 /* BT_EN */
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
-				MX6QDL_PAD_SD4_DAT0__GPIO2_IO08	0x1b0b0 /* WL_EN */
-				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0 /* WL_IRQ */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
deleted file mode 100644
index 9fc1fa449f64..000000000000
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	disp0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_disp1>;
-
-		display-timings {
-			lw700 {
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-
-		port {
-			display_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_keys>;
-
-		user-button {
-			label = "User button";
-			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_MISC>;
-			wakeup-source;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		user-led {
-			label = "User LED";
-			gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "on";
-		};
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usbh1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	sound {
-		compatible = "fsl,imx6-armadeus-sgtl5000",
-			     "fsl,imx-audio-sgtl5000";
-		model = "imx6-armadeus-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <3>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1>;
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
-		   <&gpio4 10 GPIO_ACTIVE_LOW>,
-		   <&gpio4 11 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	touchscreen@48 {
-		compatible = "semtech,sx8654";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touchscreen>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display_in>;
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "okay";
-};
-
-/* GPS */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-/* GSM */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-/* console */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	phy_type = "utmi";
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	vbus-supply = <&reg_usb_otg_vbus>;
-	dr_mode = "otg";
-	status = "okay";
-};
-
-/* microSD */
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-	no-1-8-v;
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "okay";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpios>;
-
-	apf6dev {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-			>;
-		};
-
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
-				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
-				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
-				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09  0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10  0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
-			>;
-		};
-
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
-			>;
-		};
-
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
-			>;
-		};
-
-		pinctrl_gpios: gpiosgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x100b1
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
-				MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
-				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
-				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x100b1
-				MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x100b1
-				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x100b1
-				MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x100b1
-				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x100b1
-			>;
-		};
-
-		pinctrl_gsm: gsmgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x130b0 /* GSM_POKIN */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-				MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu1_disp1: ipu1disp1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x100b1
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x100b1
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x100b1
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x100b1
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x100b1
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x100b1
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x100b1
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x100b1
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x100b1
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x100b1
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x100b1
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x100b1
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x100b1
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x100b1
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x100b1
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x100b1
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x100b1
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x100b1
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x100b1
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x100b1
-			>;
-		};
-
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
-			>;
-		};
-
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
-			>;
-		};
-
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b0
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
-				MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b0
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-			>;
-		};
-
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
-			>;
-		};
-
-		pinctrl_touchscreen: touchscreengrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
deleted file mode 100644
index d954661fa055..000000000000
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ /dev/null
@@ -1,408 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * support fot the imx6 based aristainetos board
- *
- * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-
-	reg_2p5v: regulator-2p5v {
-		compatible = "regulator-fixed";
-		regulator-name = "2P5V";
-		regulator-min-microvolt = <2500000>;
-		regulator-max-microvolt = <2500000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usbh1_vbus: regulator-usbh1-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	reg_usbotg_vbus: regulator-usbotg-vbus {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux>;
-	status = "okay";
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	tmp103: tmp103@71 {
-		compatible = "ti,tmp103";
-		reg = <0x71>;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	rtc@68 {
-		compatible = "dallas,m41t00";
-		reg = <0x68>;
-	};
-};
-
-&ecspi4 {
-	cs-gpios = <&gpio3 20 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q128a11", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usbotg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>;
-
-	imx6qdl-aristainetos {
-		pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>;
-		};
-
-		pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>;
-		};
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-			>;
-		};
-
-		pinctrl_backlight: backlightgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b0
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
-			>;
-		};
-
-		pinctrl_ecspi2: ecspi2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
-				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-				MX6QDL_PAD_EIM_D24__GPIO3_IO24  0x100b1
-			>;
-		};
-
-		pinctrl_ecspi4: ecspi4grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-				MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
-				MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
-				MX6QDL_PAD_EIM_D20__GPIO3_IO20  0x100b1
-				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO  0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC    0x1b0b0
-				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN   0x1b0b0
-				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER   0x1b0b0
-				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
-				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
-				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN  0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
-			>;
-		};
-
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
-				MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
-				>;
-		};
-
-		pinctrl_gpio: gpiogrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
-				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
-				MX6QDL_PAD_SD4_DAT5__GPIO2_IO13	0x1b0b0
-				MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
-				MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
-				MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
-			>;
-		};
-
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
-			>;
-		};
-
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x10
-			>;
-		};
-
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_ipu_disp: ipudisp1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
-				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20			0x20000
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
-				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
-				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
-				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
-				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
-				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
-				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
-				>;
-		};
-
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-			>;
-		};
-
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-				MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
deleted file mode 100644
index 019dda6b88ad..000000000000
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ /dev/null
@@ -1,864 +0,0 @@
-/*
- * Copyright 2014-2016 Toradex AG
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Toradex Colibri iMX6DL/S Module";
-	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_bl_on>;
-		pwms = <&pwm3 0 5000000>;
-		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
-		status = "disabled";
-	};
-
-	reg_module_3v3: regulator-module-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_module_3v3_audio: regulator-module-3v3-audio {
-		compatible = "regulator-fixed";
-		regulator-name = "+V3.3_AUDIO";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_host_vbus: regulator-usb-host-vbus {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
-		regulator-name = "usb_host_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx6dl-colibri-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"Headphone Jack", "HP_OUT",
-			"LINE_IN", "Line In Jack",
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias";
-		mux-int-port = <1>;
-		mux-ext-port = <5>;
-	};
-
-	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
-	sound_spdif: sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "imx-spdif";
-		spdif-controller = <&spdif>;
-		spdif-in;
-		spdif-out;
-		status = "disabled";
-	};
-};
-
-&audmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>;
-	status = "okay";
-};
-
-/* Optional on SODIMM 55/63 */
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	status = "disabled";
-};
-
-/* Optional on SODIMM 178/188 */
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	status = "disabled";
-};
-
-/* Colibri SSP */
-&ecspi4 {
-	cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi4>;
-	status = "disabled";
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@0 {
-			reg = <0>;
-			micrel,led-mode = <0>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hdmi_ddc>;
-	status = "disabled";
-};
-
-/*
- * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
- */
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	pmic: pfuze100@8 {
-		compatible = "fsl,pfuze100";
-		reg = <0x08>;
-
-		regulators {
-			sw1a_reg: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw1c_reg: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-boot-on;
-				regulator-always-on;
-				regulator-ramp-delay = <6250>;
-			};
-
-			sw3a_reg: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			swbst_reg: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			snvs_reg: vsnvs {
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vref_reg: vrefddr {
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* vgen1: unused */
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* vgen3: unused */
-
-			vgen4_reg: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen5_reg: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			vgen6_reg: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-
-	codec: sgtl5000@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_module_3v3_audio>;
-		VDDIO-supply = <&reg_module_3v3>;
-		VDDD-supply = <&vgen4_reg>;
-		lrclk-strength = <3>;
-	};
-
-	/* STMPE811 touch screen controller */
-	stmpe811@41 {
-		compatible = "st,stmpe811";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_touch_int>;
-		reg = <0x41>;
-		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-parent = <&gpio6>;
-		interrupt-controller;
-		id = <0>;
-		blocks = <0x5>;
-		irq-trigger = <0x1>;
-		/* 3.25 MHz ADC clock speed */
-		st,adc-freq = <1>;
-		/* 12-bit ADC */
-		st,mod-12b = <1>;
-		/* internal ADC reference */
-		st,ref-sel = <0>;
-		/* ADC converstion time: 80 clocks */
-		st,sample-time = <4>;
-
-		stmpe_touchscreen {
-			compatible = "st,stmpe-ts";
-			/* 8 sample average control */
-			st,ave-ctrl = <3>;
-			/* 7 length fractional part in z */
-			st,fraction-z = <7>;
-			/*
-			 * 50 mA typical 80 mA max touchscreen drivers
-			 * current limit value
-			 */
-			st,i-drive = <1>;
-			/* 1 ms panel driver settling time */
-			st,settling = <3>;
-			/* 5 ms touch detect interrupt delay */
-			st,touch-det-delay = <5>;
-		};
-
-		stmpe_adc {
-			compatible = "st,stmpe-adc";
-			/* forbid to use ADC channels 3-0 (touch) */
-			st,norequest-mask = <0x0F>;
-		};
-	};
-};
-
-/*
- * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
- */
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default", "recovery";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	pinctrl-1 = <&pinctrl_i2c3_recovery>;
-	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	status = "disabled";
-};
-
-/* Colibri PWM<B> */
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "disabled";
-};
-
-/* Colibri PWM<D> */
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>;
-	status = "disabled";
-};
-
-/* Colibri PWM<A> */
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>;
-	status = "disabled";
-};
-
-/* Colibri PWM<C> */
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "disabled";
-};
-
-/* Optional S/PDIF out on SODIMM 137 */
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spdif>;
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "okay";
-};
-
-/* Colibri UART_A */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-/* Colibri UART_B */
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_dte>;
-	fsl,dte-mode;
-	uart-has-rtscts;
-	status = "disabled";
-};
-
-/* Colibri UART_C */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3_dte>;
-	fsl,dte-mode;
-	status = "disabled";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	disable-over-current;
-	dr_mode = "peripheral";
-	status = "disabled";
-};
-
-/* Colibri MMC */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
-	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
-	disable-wp;
-	vqmmc-supply = <&reg_module_3v3>;
-	bus-width = <4>;
-	no-1-8-v;
-	status = "disabled";
-};
-
-/* eMMC */
-&usdhc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	vqmmc-supply = <&reg_module_3v3>;
-	bus-width = <8>;
-	no-1-8-v;
-	non-removable;
-	status = "okay";
-};
-
-&weim {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_weim_sram  &pinctrl_weim_cs0
-		     &pinctrl_weim_cs1   &pinctrl_weim_cs2
-		     &pinctrl_weim_rdnwr &pinctrl_weim_npwe>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-	status = "disabled";
-};
-
-&iomuxc {
-	pinctrl_audmux: audmuxgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
-			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
-			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
-			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
-			/* SGTL5000 sys_mclk */
-			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
-		>;
-	};
-
-	pinctrl_cam_mclk: cammclkgrp {
-		fsl,pins = <
-			/* Parallel Camera CAM sys_mclk */
-			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x00b0
-		>;
-	};
-
-	pinctrl_ecspi4: ecspi4grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
-			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
-			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
-			/* SPI CS */
-			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
-		>;
-	};
-
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
-			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
-			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
-			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
-			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK     ((1<<30) | 0x1b0b0)
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
-			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_bl_on: gpioblon {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpio_keys: gpiokeys {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
-		>;
-	};
-
-	pinctrl_hdmi_ddc: hdmiddcgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
-			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3_recovery: i2c3recoverygrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
-			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
-		>;
-	};
-
-	pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */
-		fsl,pins = <
-			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12	0xb0b1
-			MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13	0xb0b1
-			MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14	0xb0b1
-			MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15	0xb0b1
-			MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16	0xb0b1
-			MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17	0xb0b1
-			MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18	0xb0b1
-			MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19	0xb0b1
-			MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK	0xb0b1
-			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
-			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
-			/* Disable PWM pins on camera interface */
-			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
-			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
-		>;
-	};
-
-	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0xa1
-			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0xa1
-			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0xa1
-			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0xa1
-			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0xa1
-			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0xa1
-			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0xa1
-			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0xa1
-			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0xa1
-			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0xa1
-			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0xa1
-			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0xa1
-			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0xa1
-			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0xa1
-			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0xa1
-			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0xa1
-			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0xa1
-			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0xa1
-			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0xa1
-			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0xa1
-			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0xa1
-			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0xa1
-		>;
-	};
-
-	pinctrl_mic_gnd: gpiomicgnd {
-		fsl,pins = <
-			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
-			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
-		>;
-	};
-
-	pinctrl_mmc_cd: gpiommccd {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
-			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
-			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
-		>;
-	};
-
-	pinctrl_pwm4: pwm4grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
-		>;
-	};
-
-	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
-		fsl,pins = <
-			/* USBH_EN */
-			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
-		>;
-	};
-
-	pinctrl_spdif: spdifgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
-		>;
-	};
-
-	pinctrl_touch_int: gpiotouchintgrp {
-		fsl,pins = <
-			/* STMPE811 interrupt */
-			MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart1_dce: uart1dcegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-		>;
-	};
-
-	/* DTE mode */
-	pinctrl_uart1_dte: uart1dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
-			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
-			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
-			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
-		>;
-	};
-
-	/* Additional DTR, DSR, DCD */
-	pinctrl_uart1_ctrl: uart1ctrlgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
-			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
-			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
-		>;
-	};
-
-	pinctrl_uart2_dte: uart2dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
-			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3_dte: uart3dtegrp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_usbc_det: usbcdetgrp {
-		fsl,pins = <
-			/* USBC_DET */
-			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
-			/* USBC_DET_EN */
-			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
-			/* USBC_DET_OVERWRITE */
-			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
-			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
-			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
-			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
-			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
-			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
-		>;
-	};
-
-	pinctrl_usdhc3: usdhc3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
-			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
-			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
-			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
-			/* eMMC reset */
-			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
-		>;
-	};
-
-	pinctrl_weim_cs0: weimcs0grp {
-		fsl,pins = <
-			/* nEXT_CS0 */
-			MX6QDL_PAD_EIM_CS0__EIM_CS0_B	0xb0b1
-		>;
-	};
-
-	pinctrl_weim_cs1: weimcs1grp {
-		fsl,pins = <
-			/* nEXT_CS1 */
-			MX6QDL_PAD_EIM_CS1__EIM_CS1_B	0xb0b1
-		>;
-	};
-
-	pinctrl_weim_cs2: weimcs2grp {
-		fsl,pins = <
-			/* nEXT_CS2 */
-			MX6QDL_PAD_SD2_DAT1__EIM_CS2_B	0xb0b1
-		>;
-	};
-
-	pinctrl_weim_sram: weimsramgrp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
-			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
-			/* Data */
-			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
-			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
-			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
-			/* Address */
-			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
-			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
-			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
-			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
-			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
-			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
-			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
-			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
-			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
-			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
-			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
-			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
-			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
-			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
-			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
-			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
-		>;
-	};
-
-	pinctrl_weim_rdnwr: weimrdnwr {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
-			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
-		>;
-	};
-
-	pinctrl_weim_npwe: weimnpwe {
-		fsl,pins = <
-			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
-			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
-		>;
-	};
-
-	/* ADDRESS[16:18] [25] used as GPIO */
-	pinctrl_weim_gpio_1: weimgpio-1 {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-		>;
-	};
-
-	/* ADDRESS[19:24] used as GPIO */
-	pinctrl_weim_gpio_2: weimgpio-2 {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
-			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
-			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
-			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
-			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
-		>;
-	};
-
-	/* DATA[16:31] used as GPIO */
-	pinctrl_weim_gpio_3: weimgpio-3 {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
-			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
-			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
-			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
-			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
-			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
-			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
-			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
-			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
-			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
-			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
-			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
-			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
-		>;
-	};
-
-	/* DQM[0:3] used as GPIO */
-	pinctrl_weim_gpio_4: weimgpio-4 {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
-			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
-			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
-		>;
-	};
-
-	/* RDY used as GPIO */
-	pinctrl_weim_gpio_5: weimgpio-5 {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
-		>;
-	};
-
-	/* ADDRESS[16] DATA[30] used as GPIO */
-	pinctrl_weim_gpio_6: weimgpio-6 {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
deleted file mode 100644
index e3be453d8a4a..000000000000
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * Copyright (C) 2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* Will be filled by the bootloader */
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0>;
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 9 1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_ir>;
-	};
-
-	pwmleds {
-		compatible = "pwm-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
-
-		front {
-			active-low;
-			label = "imx6:red:front";
-			max-brightness = <248>;
-			pwms = <&pwm1 0 50000>;
-		};
-	};
-
-	v_5v0: regulator-v-5v0 {
-		compatible = "regulator-fixed";
-		regulator-always-on;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_5v0";
-	};
-
-	v_usb2: regulator-v-usb2 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb2";
-		vin-supply = <&v_5v0>;
-	};
-
-	v_usb1: regulator-v-usb1 {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
-		regulator-max-microvolt = <5000000>;
-		regulator-min-microvolt = <5000000>;
-		regulator-name = "v_usb1";
-		vin-supply = <&v_5v0>;
-	};
-
-	sound-spdif {
-		compatible = "fsl,imx-audio-spdif";
-		model = "Integrated SPDIF";
-		/* IMX6 doesn't implement this yet */
-		spdif-controller = <&spdif>;
-		spdif-out;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-0 = <&pinctrl_gpio_key>;
-		pinctrl-names = "default";
-
-		button_0 {
-			label = "Button 0";
-			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-	};
-};
-
-&hdmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
-	ddc-i2c-bus = <&i2c2>;
-	status = "okay";
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
-
-	status = "okay";
-
-	rtc@68 {
-		compatible = "nxp,pcf8523";
-		reg = <0x68>;
-	};
-};
-
-&iomuxc {
-	cubox_i {
-		pinctrl_cubox_i_hdmi: cubox-i-hdmi {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
-
-		pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
-			>;
-		};
-
-		pinctrl_cubox_i_ir: cubox-i-ir {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
-			>;
-		};
-
-		pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
-			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
-		};
-
-		pinctrl_cubox_i_spdif: cubox-i-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
-		};
-
-		pinctrl_cubox_i_usbh1: cubox-i-usbh1 {
-			fsl,pins = <MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0>;
-		};
-
-		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
-			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x4001b0b0>;
-		};
-
-		pinctrl_cubox_i_usbotg: cubox-i-usbotg {
-			/*
-			 * The Cubox-i pulls ID low, but as it's pointless
-			 * leaving it as a pull-up, even if it is just 10uA.
-			 */
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
-				MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
-			>;
-		};
-
-		pinctrl_cubox_i_usbotg_vbus: cubox-i-usbotg-vbus {
-			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x4001b0b0>;
-		};
-
-		pinctrl_cubox_i_usdhc2_aux: cubox-i-usdhc2-aux {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
-				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
-			>;
-		};
-
-		pinctrl_cubox_i_usdhc2: cubox-i-usdhc2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
-			>;
-		};
-
-		pinctrl_gpio_key: gpio-key {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x17059
-			>;
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
-};
-
-&spdif {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
-	status = "okay";
-};
-
-&usbh1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
-	vbus-supply = <&v_usb2>;
-	status = "okay";
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
-	vbus-supply = <&v_usb1>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
-	vmmc-supply = <&vcc_3v3>;
-	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&vcc_3v3 {
-	vin-supply = <&v_5v0>;
-};
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
deleted file mode 100644
index ebe7a8bddf04..000000000000
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ /dev/null
@@ -1,201 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		dummy_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "dummy-supply";
-		};
-
-		reg_usb_otg_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
-	};
-
-	chosen {
-		stdout-path = &uart1;
-	};
-};
-
-&ecspi3 {
-	cs-gpios = <&gpio4 24 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "sst,sst25vf040b", "jedec,spi-nor";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	status = "okay";
-	phy-mode = "rgmii";
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	imx6qdl-dfi-fs700-m60 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC irq */
-				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000 /* MAX11801 irq */
-				MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x000030b0 /* Backlight enable */
-			>;
-		};
-
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
-			>;
-		};
-
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
-			>;
-		};
-
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* card detect */
-			>;
-		};
-
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
-
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
-			>;
-		};
-
-		pinctrl_ecspi3: ecspi3grp {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
-				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-			>;
-		};
-	};
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&usbh1 {
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 { /* module slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&usdhc3 { /* baseboard slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-};
-
-&usdhc4 { /* eMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
deleted file mode 100644
index dc646b72b59a..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ /dev/null
@@ -1,367 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2014 Gateworks Corporation
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		nand = &gpmi;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		bootargs = "console=ttymxc1,115200";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x20000000>;
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_5p0v: regulator-5p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "5P0V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-};
-
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	status = "okay";
-};
-
-&hdmi {
-	ddc-i2c-bus = <&i2c3>;
-	status = "okay";
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	rtc: ds1672@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pmic>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay"; };
-
-&usbh1 {
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-		>;
-	};
-
-	pinctrl_gpmi_nand: gpminandgrp {
-		fsl,pins = <
-			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-		>;
-	};
-
-	pinctrl_pcie: pciegrp {
-		fsl,pins = <
-			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
-		>;
-	};
-
-	pinctrl_pmic: pmicgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
-		>;
-	};
-
-	pinctrl_pwm2: pwm2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_pwm3: pwm3grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_uart5: uart5grp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
deleted file mode 100644
index 6d21cc6a9d4b..000000000000
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * Copyright 2017 Gateworks Corporation
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	/* these are used by bootloader for disabling nodes */
-	aliases {
-		led0 = &led0;
-		led1 = &led1;
-		led2 = &led2;
-		usb0 = &usbh1;
-		usb1 = &usbotg;
-	};
-
-	chosen {
-		stdout-path = &uart2;
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm4 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <7>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
-
-		led0: user1 {
-			label = "user1";
-			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-
-		led1: user2 {
-			label = "user2";
-			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-			default-state = "off";
-		};
-
-		led2: user3 {
-			label = "user3";
-			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-			default-state = "off";
-		};
-	};
-
-	memory@10000000 {
-		device_type = "memory";
-		reg = <0x10000000 0x40000000>;
-	};
-
-	pps {
-		compatible = "pps-gpio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pps>;
-		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_1p0v: regulator-1p0v {
-		compatible = "regulator-fixed";
-		regulator-name = "1P0V";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1000000>;
-		regulator-always-on;
-	};
-
-	reg_3p3v: regulator-3p3v {
-		compatible = "regulator-fixed";
-		regulator-name = "3P3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_usb_h1_vbus: regulator-usb-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_h1_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	reg_usb_otg_vbus: regulator-usb-otg-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "usb_otg_vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
-			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
-	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
-				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii-id";
-	status = "okay";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		switch@0 {
-			compatible = "marvell,mv88e6085";
-			reg = <0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan4";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan3";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan1";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "cpu";
-					ethernet = <&fec>;
-				};
-			};
-		};
-	};
-};
-
-&i2c1 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1>;
-	status = "okay";
-
-	pca9555: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	eeprom1: eeprom@50 {
-		compatible = "atmel,24c02";
-		reg = <0x50>;
-		pagesize = <16>;
-	};
-
-	eeprom2: eeprom@51 {
-		compatible = "atmel,24c02";
-		reg = <0x51>;
-		pagesize = <16>;
-	};
-
-	eeprom3: eeprom@52 {
-		compatible = "atmel,24c02";
-		reg = <0x52>;
-		pagesize = <16>;
-	};
-
-	eeprom4: eeprom@53 {
-		compatible = "atmel,24c02";
-		reg = <0x53>;
-		pagesize = <16>;
-	};
-
-	dts1672: rtc@68 {
-		compatible = "dallas,ds1672";
-		reg = <0x68>;
-	};
-};
-
-&i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	ltc3676: pmic@3c {
-		compatible = "lltc,ltc3676";
-		reg = <0x3c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-
-		regulators {
-			/* VDD_SOC (1+R1/R2 = 1.635) */
-			reg_vdd_soc: sw1 {
-				regulator-name = "vddsoc";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */
-			reg_1p8v: sw2 {
-				regulator-name = "vdd1p8";
-				regulator-min-microvolt = <1033310>;
-				regulator-max-microvolt = <2004000>;
-				lltc,fb-voltage-divider = <301000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_ARM (1+R1/R2 = 1.635) */
-			reg_vdd_arm: sw3 {
-				regulator-name = "vddarm";
-				regulator-min-microvolt = <674400>;
-				regulator-max-microvolt = <1308000>;
-				lltc,fb-voltage-divider = <127000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_DDR (1+R1/R2 = 2.105) */
-			reg_vdd_ddr: sw4 {
-				regulator-name = "vddddr";
-				regulator-min-microvolt = <868310>;
-				regulator-max-microvolt = <1684000>;
-				lltc,fb-voltage-divider = <221000 200000>;
-				regulator-ramp-delay = <7000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
-			reg_2p5v: ldo2 {
-				regulator-name = "vdd2p5";
-				regulator-min-microvolt = <2490375>;
-				regulator-max-microvolt = <2490375>;
-				lltc,fb-voltage-divider = <487000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-
-			/* VDD_HIGH (1+R1/R2 = 4.17) */
-			reg_3p0v: ldo4 {
-				regulator-name = "vdd3p0";
-				regulator-min-microvolt = <3023250>;
-				regulator-max-microvolt = <3023250>;
-				lltc,fb-voltage-divider = <634000 200000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c3 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3>;
-	status = "okay";
-
-	egalax_ts: touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&ldb {
-	status = "okay";
-
-	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-			};
-		};
-	};
-};
-
-&pcie {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-	status = "okay";
-};
-
-&pwm2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-	status = "disabled";
-};
-
-&pwm3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-	status = "disabled";
-};
-
-&pwm4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart5>;
-	status = "okay";
-};
-
-&usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg>;
-	disable-over-current;
-	status = "okay";
-};
-
-&usbh1 {
-	vbus-supply = <&reg_usb_h1_vbus>;
-	status = "okay";
-};
-
-&usdhc3 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	non-removable;
-	vmmc-supply = <&reg_3p3v>;
-	keep-power-in-suspend;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl_enet: enetgrp {
-		fsl,pins = <
-			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
-			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
-			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
-		>;
-	};
-
-	pinctrl_gpio_leds: gpioledsgrp {
-		fsl,pins = <
-			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-		>patible
+  - reg
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dsi@28200000 {
+        compatible = "apple,t8103-display-pipe-mipi", "apple,h7-display-pipe-mipi";
+        reg = <0x28200000 0xc000>;
+        power-domains = <&ps_dispdfr_mipi>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dfr_adp_out_mipi: endpoint {
+                    remote-endpoint = <&dfr_adp_out_mipi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dfr_panel_in: endpoint {
+                    remote-endpoint = <&dfr_mipi_out_panel>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/apple,h7-display-pipe.yaml b/Documentation/devicetree/bindings/display/apple,h7-display-pipe.yaml
new file mode 100644
index 000000000000..102fb1804c0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/apple,h7-display-pipe.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/apple,h7-display-pipe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple pre-DCP display controller
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description:
+  A secondary display controller used to drive the "touchbar" on
+  certain Apple laptops.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8112-display-pipe
+          - apple,t8103-display-pipe
+      - const: apple,h7-display-pipe
+
+  reg:
+    items:
+      - description: Primary register block, controls planes and blending
+      - description:
+          Contains other configuration registers like interrupt
+          and FIFO control
+
+  reg-names:
+    items:
+      - const: be
+      - const: fe
+
+  power-domains:
+    description:
+      Phandles to pmgr entries that are needed for this controller to turn on.
+      Aside from that, their specific functions are unknown
+    maxItems: 2
+
+  interrupts:
+    items:
+      - description: Unknown function
+      - description: Primary interrupt. Vsync events are reported via it
+
+  interrupt-names:
+    items:
+      - const: be
+      - const: fe
+
+  iommus:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Output port. Always connected to apple,h7-display-pipe-mipi
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    display-pipe@28200000 {
+        compatible = "apple,t8103-display-pipe", "apple,h7-display-pipe";
+        reg = <0x28200000 0xc000>,
+              <0x28400000 0x4000>;
+        reg-names = "be", "fe";
+        power-domains = <&ps_dispdfr_fe>, <&ps_dispdfr_be>;
+        interrupt-parent = <&aic>;
+        interrupts = <AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 506 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "be", "fe";
+        iommus = <&displaydfr_dart 0>;
+
+        port {
+            dfr_adp_out_mipi: endpoint {
+                remote-endpoint = <&dfr_mipi_in_adp>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt
deleted file mode 100644
index 78bc24296f3e..000000000000
--- a/Documentation/devicetree/bindings/display/arm,hdlcd.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-ARM HDLCD
-
-This is a display controller found on several development platforms produced
-by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB
-streamer that reads the data from a framebuffer and sends it to a single
-digital encoder (DVI or HDMI).
-
-Required properties:
-  - compatible: "arm,hdlcd"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: One interrupt used by the display controller to notify the
-    interrupt controller when any of the interrupt sources programmed in
-    the interrupt mask register have activated.
-  - clocks: A list of phandle + clock-specifier pairs, one for each
-    entry in 'clock-names'.
-  - clock-names: A list of clock names. For HDLCD it should contain:
-      - "pxlclk" for the clock feeding the output PLL of the controller.
-
-Required sub-nodes:
-  - port: The HDLCD connection to an encoder chip. The connection is modeled
-    using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt.
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be
-    used for the framebuffer; if not present, the framebuffer may be located
-    anywhere in memory.
-
-
-Example:
-
-/ {
-	...
-
-	hdlcd@2b000000 {
-		compatible = "arm,hdlcd";
-		reg = <0 0x2b000000 0 0x1000>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&oscclk5>;
-		clock-names = "pxlclk";
-		port {
-			hdlcd_output: endpoint@0 {
-				remote-endpoint = <&hdmi_enc_input>;
-			};
-		};
-	};
-
-	/* HDMI encoder on I2C bus */
-	i2c@7ffa0000 {
-		....
-		hdmi-transmitter@70 {
-			compatible = ".....";
-			reg = <0x70>;
-			port@0 {
-				hdmi_enc_input: endpoint {
-					remote-endpoint = <&hdlcd_output>;
-				};
-
-				hdmi_enc_output: endpoint {
-					remote-endpoint = <&hdmi_1_port>;
-				};
-			};
-		};
-
-	};
-
-	hdmi1: connector@1 {
-		compatible = "hdmi-connector";
-		type = "a";
-		port {
-			hdmi_1_port: endpoint {
-				remote-endpoint = <&hdmi_enc_output>;
-			};
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.yaml b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
new file mode 100644
index 000000000000..9a30e9005e8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm HDLCD display controller
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm HDLCD is a display controller found on several development platforms
+  produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an
+  RGB streamer that reads the data from a framebuffer and sends it to a single
+  digital encoder (DVI or HDMI).
+
+properties:
+  compatible:
+    const: arm,hdlcd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: pxlclk
+
+  clocks:
+    maxItems: 1
+    description: The input reference for the pixel clock.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - port
+
+examples:
+  - |
+    hdlcd@2b000000 {
+        compatible = "arm,hdlcd";
+        reg = <0x2b000000 0x1000>;
+        interrupts = <0 85 4>;
+        clocks = <&oscclk5>;
+        clock-names = "pxlclk";
+        port {
+            hdlcd_output: endpoint {
+                remote-endpoint = <&hdmi_enc_input>;
+            };
+        };
+    };
+
+    /* HDMI encoder on I2C bus */
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hdmi-transmitter@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            port {
+                hdmi_enc_input: endpoint {
+                    remote-endpoint = <&hdlcd_output>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt
deleted file mode 100644
index 8513695ee47f..000000000000
--- a/Documentation/devicetree/bindings/display/arm,komeda.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device Tree bindings for Arm Komeda display driver
-
-Required properties:
-- compatible: Should be "arm,mali-d71"
-- reg: Physical base address and length of the registers in the system
-- interrupts: the interrupt line number of the device in the system
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: A list of clock names. It should contain:
-      - "aclk": for the main processor clock
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-- iommus: configure the stream id to IOMMU, Must be configured if want to
-    enable iommu in display. for how to configure this node please reference
-        devicetree/bindings/iommu/arm,smmu-v3.txt,
-        devicetree/bindings/iommu/iommu.txt
-
-Required properties for sub-node: pipeline@nq
-Each device contains one or two pipeline sub-nodes (at least one), each
-pipeline node should provide properties:
-- reg: Zero-indexed identifier for the pipeline
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: should contain:
-      - "pxclk": pixel clock
-
-- port: each pipeline connect to an encoder input port. The connection is
-    modeled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-
-Example:
-/ {
-	...
-
-	dp0: display@c00000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "arm,mali-d71";
-		reg = <0xc00000 0x20000>;
-		interrupts = <0 168 4>;
-		clocks = <&dpu_aclk>;
-		clock-names = "aclk";
-		iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
-			<&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
-			<&smmu 8>, <&smmu 9>;
-
-		dp0_pipe0: pipeline@0 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <0>;
-
-			port {
-				dp0_pipe0_out: endpoint {
-					remote-endpoint = <&db_dvi0_in>;
-				};
-			};
-		};
-
-		dp0_pipe1: pipeline@1 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <1>;
-
-			port {
-				dp0_pipe1_out: endpoint {
-					remote-endpoint = <&db_dvi1_in>;
-				};
-			};
-		};
-	};
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.yaml b/Documentation/devicetree/bindings/display/arm,komeda.yaml
new file mode 100644
index 000000000000..3ad3eef89ca8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,komeda.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,komeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Komeda display processor
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Mali D71 display processor supports up to two displays with up
+  to a 4K resolution each. Each pipeline can be composed of up to four
+  layers. It is typically connected to a digital display connector like HDMI.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,mali-d32
+          - const: arm,mali-d71
+      - const: arm,mali-d71
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: aclk
+
+  clocks:
+    maxItems: 1
+    description: The main DPU processor clock
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    description:
+      The stream IDs for each of the used pipelines, each four IDs for the
+      four layers, plus one for the write-back stream.
+    minItems: 5
+    maxItems: 10
+
+patternProperties:
+  '^pipeline@[01]$':
+    type: object
+    additionalProperties: false
+    description:
+      clocks
+
+    properties:
+      reg:
+        enum: [ 0, 1 ]
+
+      clock-names:
+        const: pxclk
+
+      clocks:
+        maxItems: 1
+        description: The input reference for the pixel clock.
+
+      port:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - pipeline@0
+
+examples:
+  - |
+    display@c00000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "arm,mali-d71";
+        reg = <0xc00000 0x20000>;
+        interrupts = <168>;
+        clocks = <&dpu_aclk>;
+        clock-names = "aclk";
+        iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
+                 <&smmu 8>,
+                 <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
+                 <&smmu 9>;
+
+        dp0_pipe0: pipeline@0 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <0>;
+
+            port {
+                dp0_pipe0_out: endpoint {
+                    remote-endpoint = <&db_dvi0_in>;
+                };
+            };
+        };
+
+        dp0_pipe1: pipeline@1 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <1>;
+
+            port {
+                dp0_pipe1_out: endpoint {
+                    remote-endpoint = <&db_dvi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
deleted file mode 100644
index 7a97a2b48c2a..000000000000
--- a/Documentation/devicetree/bindings/display/arm,malidp.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-ARM Mali-DP
-
-The following bindings apply to a family of Display Processors sold as
-licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
-DP650 processors that offer multiple composition layers, support for
-rotation and scaling output.
-
-Required properties:
-  - compatible: should be one of
-	"arm,mali-dp500"
-	"arm,mali-dp550"
-	"arm,mali-dp650"
-    depending on the particular implementation present in the hardware
-  - reg: Physical base address and size of the block of registers used by
-    the processor.
-  - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
-    interrupt client nodes.
-  - interrupt-names: name of the engine inside the processor that will
-    use the corresponding interrupt. Should be one of "DE" or "SE".
-  - clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-  - clock-names: A list of clock names. It should contain:
-      - "pclk": for the APB interface clock
-      - "aclk": for the AXI interface clock
-      - "mclk": for the main processor clock
-      - "pxlclk": for the pixel clock feeding the output PLL of the processor.
-  - arm,malidp-output-port-lines: Array of u8 values describing the number
-    of output lines per channel (R, G and B).
-
-Required sub-nodes:
-  - port: The Mali DP connection to an encoder input port. The connection
-    is modelled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-  - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
-    levels of DP500's QoS signaling.
-
-
-Example:
-
-/ {
-	...
-
-	dp0: malidp@6f200000 {
-		compatible = "arm,mali-dp650";
-		reg = <0 0x6f200000 0 0x20000>;
-		memory-region = <&display_reserved>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 168 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "DE", "SE";
-		clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
-		clock-names = "pxlclk", "mclk", "aclk", "pclk";
-		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
-		arm,malidp-arqos-high-level = <0xd000d000>;
-		port {
-			dp0_output: endpoint {
-				remote-endpoint = <&tda998x_2_input>;
-			};
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
new file mode 100644
index 000000000000..91812573fd08
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,malidp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Mali Display Processor (Mali-DP)
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The following bindings apply to a family of Display Processors sold as
+  licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+  DP650 processors that offer multiple composition layers, support for
+  rotation and scaling output.
+
+properties:
+  compatible:
+    enum:
+      - arm,mali-dp500
+      - arm,mali-dp550
+      - arm,mali-dp650
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description:
+          The interrupt used by the Display Engine (DE). Can be shared with
+          the interrupt for the Scaling Engine (SE), but it will have to be
+          listed individually.
+      - description:
+          The interrupt used by the Scaling Engine (SE). Can be shared with
+          the interrupt for the Display Engine (DE), but it will have to be
+          listed individually.
+
+  interrupt-names:
+    items:
+      - const: DE
+      - const: SE
+
+  clock-names:
+    items:
+      - const: pxlclk
+      - const: mclk
+      - const: aclk
+      - const: pclk
+
+  clocks:
+    items:
+      - description: the pixel clock feeding the output PLL of the processor
+      - description: the main processor clock
+      - description: the AXI interface clock
+      - description: the APB interface clock
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  arm,malidp-output-port-lines:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Number of output lines/bits for each colour channel.
+    items:
+      - description: number of output lines for the red channel (R)
+      - description: number of output lines for the green channel (G)
+      - description: number of output lines for the blue channel (B)
+
+  arm,malidp-arqos-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Quality-of-Service value for the display engine FIFOs, to write
+      into the RQOS register of the DP500.
+      See the ARM Mali-DP500 TRM for details on the encoding.
+      If omitted, the RQOS register will not be changed.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - port
+  - arm,malidp-output-port-lines
+
+examples:
+  - |
+    dp0: malidp@6f200000 {
+        compatible = "arm,mali-dp650";
+        reg = <0x6f200000 0x20000>;
+        memory-region = <&display_reserved>;
+        interrupts = <168>, <168>;
+        interrupt-names = "DE", "SE";
+        clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+        clock-names = "pxlclk", "mclk", "aclk", "pclk";
+        arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+        arm,malidp-arqos-value = <0xd000d000>;
+
+        port {
+            dp0_output: endpoint {
+                remote-endpoint = <&tda998x_2_input>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt
deleted file mode 100644
index 3f977e72a200..000000000000
--- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-* ARM PrimeCell Color LCD Controller PL110/PL111
-
-See also Documentation/devicetree/bindings/arm/primecell.yaml
-
-Required properties:
-
-- compatible: must be one of:
-	"arm,pl110", "arm,primecell"
-	"arm,pl111", "arm,primecell"
-
-- reg: base address and size of the control registers block
-
-- interrupt-names: either the single entry "combined" representing a
-	combined interrupt output (CLCDINTR), or the four entries
-	"mbe", "vcomp", "lnbu", "fuf" representing the individual
-	CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts
-
-- interrupts: contains an interrupt specifier for each entry in
-	interrupt-names
-
-- clock-names: should contain "clcdclk" and "apb_pclk"
-
-- clocks: contains phandle and clock specifier pairs for the entries
-	in the clock-names property. See
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional properties:
-
-- memory-region: phandle to a node describing memory (see
-	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-	to be used for the framebuffer; if not present, the framebuffer
-	may be located anywhere in the memory
-
-- max-memory-bandwidth: maximum bandwidth in bytes per second that the
-	cell's memory interface can handle; if not present, the memory
-	interface is fast enough to handle all possible video modes
-
-Required sub-nodes:
-
-- port: describes LCD panel signals, following the common binding
-	for video transmitter interfaces; see
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Deprecated properties:
-	The port's endbpoint subnode had this, now deprecated property
-	in the past. Drivers should be able to survive without it:
-
-	- arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values,
-		defining the way CLD pads are wired up; first value
-		contains index of the "CLD" external pin (pad) used
-		as R0 (first bit of the red component), second value
-	        index of the pad used as G0, third value index of the
-		pad used as B0, see also "LCD panel signal multiplexing
-		details" paragraphs in the PL110/PL111 Technical
-		Reference Manuals; this implicitly defines available
-		color modes, for example:
-		- PL111 TFT 4:4:4 panel:
-			arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
-		- PL110 TFT (1:)5:5:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
-		- PL111 TFT (1:)5:5:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
-		- PL111 TFT 5:6:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
-		- PL110 and PL111 TFT 8:8:8 panel:
-			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-		- PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
-			arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
-
-
-Example:
-
-	clcd@10020000 {
-		compatible = "arm,pl111", "arm,primecell";
-		reg = <0x10020000 0x1000>;
-		interrupt-names = "combined";
-		interrupts = <0 44 4>;
-		clocks = <&oscclk1>, <&oscclk2>;
-		clock-names = "clcdclk", "apb_pclk";
-		max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
-
-		port {
-			clcd_pads: endpoint {
-				remote-endpoint = <&clcd_panel>;
-			};
-		};
-
-	};
-
-	panel {
-		compatible = "panel-dpi";
-
-		port {
-			clcd_panel: endpoint {
-				remote-endpoint = <&clcd_pads>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <25175000>;
-			hactive = <640>;
-			hback-porch = <40>;
-			hfront-porch = <24>;
-			hsync-len = <96>;
-			vactive = <480>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <2>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
new file mode 100644
index 000000000000..a43c1c9d9113
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,pl11x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm PrimeCell Color LCD Controller PL110/PL111
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out
+  a framebuffer region in system memory, and creates timed signals for
+  a variety of LCD panels.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl110
+          - arm,pl111
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl110
+          - arm,pl111
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupt-names:
+    oneOf:
+      - const: combined
+        description:
+          The IP provides four individual interrupt lines, but also one
+          combined line. If the integration only connects this line to the
+          interrupt controller, this single interrupt is noted here.
+      - items:
+          - const: mbe        # CLCDMBEINTR
+          - const: vcomp      # CLCDVCOMPINTR
+          - const: lnbu       # CLCDLNBUINTR
+          - const: fuf        # CLCDFUFINTR
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: clcdclk
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: The CLCDCLK reference clock for the controller.
+      - description: The HCLK AHB slave clock for the register access.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum bandwidth in bytes per second that the cell's memory interface
+      can handle.
+      If not present, the memory interface is fast enough to handle all
+      possible video modes.
+
+  resets:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+
+        properties:
+          arm,pl11x,tft-r0g0b0-pads:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              - description: index of CLD pad used for first red bit (R0)
+              - description: index of CLD pad used for first green bit (G0)
+              - description: index of CLD pad used for first blue bit (G0)
+            deprecated: true
+            description: |
+              DEPRECATED. An array of three 32-bit values, defining the way
+              CLD[23:0] pads are wired up.
+              The first value contains the index of the "CLD" external pin (pad)
+              used as R0 (first bit of the red component), the second value for
+              green, the third value for blue.
+              See also "LCD panel signal multiplexing details" paragraphs in the
+              PL110/PL111 Technical Reference Manuals.
+              This implicitly defines available color modes, for example:
+              - PL111 TFT 4:4:4 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+              - PL110 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+              - PL111 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+              - PL111 TFT 5:6:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+              - PL110 and PL111 TFT 8:8:8 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+              - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+                  arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - port
+
+allOf:
+  - if:
+      properties:
+        interrupts:
+          minItems: 2
+      required:
+        - interrupts
+    then:
+      required:
+        - interrupt-names
+
+examples:
+  - |
+    clcd@10020000 {
+        compatible = "arm,pl111", "arm,primecell";
+        reg = <0x10020000 0x1000>;
+        interrupt-names = "combined";
+        interrupts = <44>;
+        clocks = <&oscclk1>, <&oscclk2>;
+        clock-names = "clcdclk", "apb_pclk";
+        max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+
+        port {
+            clcd_pads: endpoint {
+                remote-endpoint = <&clcd_panel>;
+            };
+        };
+    };
+
+    panel {
+        compatible = "arm,rtsm-display";
+
+        port {
+            clcd_panel: endpoint {
+                remote-endpoint = <&clcd_pads>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml
new file mode 100644
index 000000000000..a5cf040ab4ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/atmel,lcdc-display.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel,lcdc-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip's LCDC Display
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The LCD Controller (LCDC) consists of logic for transferring LCD image data
+  from an external display buffer to a TFT LCD panel. The LCDC has one display
+  input buffer per layer that fetches pixels through the single bus host
+  interface and a look-up table to allow palletized display configurations. The
+  LCDC is programmable on a per layer basis, and supports different LCD
+  resolutions, window sizes, image formats and pixel depths.
+
+# We need a select here since this schema is applicable only for nodes with the
+# following properties
+
+select:
+  anyOf:
+    - required: [ 'atmel,dmacon' ]
+    - required: [ 'atmel,lcdcon2' ]
+    - required: [ 'atmel,guard-time' ]
+
+properties:
+  atmel,dmacon:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: dma controller configuration
+
+  atmel,lcdcon2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: lcd controller configuration
+
+  atmel,guard-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: lcd guard time (Delay in frame periods)
+    maximum: 127
+
+  bits-per-pixel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: lcd panel bit-depth.
+    enum: [1, 2, 4, 8, 16, 24, 32]
+
+  atmel,lcdcon-backlight:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: enable backlight
+
+  atmel,lcdcon-backlight-inverted:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: invert backlight PWM polarity
+
+  atmel,lcd-wiring-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: lcd wiring mode "RGB" or "BRG"
+    enum:
+      - RGB
+      - BRG
+
+  atmel,power-control-gpio:
+    description: gpio to power on or off the LCD (as many as needed)
+    maxItems: 1
+
+  display-timings:
+    $ref: panel/display-timings.yaml#
+
+required:
+  - atmel,dmacon
+  - atmel,lcdcon2
+  - atmel,guard-time
+  - bits-per-pixel
+
+additionalProperties: false
+
+examples:
+  - |
+    display: panel {
+      bits-per-pixel = <32>;
+      atmel,lcdcon-backlight;
+      atmel,dmacon = <0x1>;
+      atmel,lcdcon2 = <0x80008002>;
+      atmel,guard-time = <9>;
+      atmel,lcd-wiring-mode = "RGB";
+
+      display-timings {
+        native-mode = <&timing0>;
+        timing0: timing0 {
+          clock-frequency = <9000000>;
+          hactive = <480>;
+          vactive = <272>;
+          hback-porch = <1>;
+          hfront-porch = <1>;
+          vback-porch = <40>;
+          vfront-porch = <1>;
+          hsync-len = <45>;
+          vsync-len = <1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
deleted file mode 100644
index acb5a0132127..000000000000
--- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-Atmel LCDC Framebuffer
------------------------------------------------------
-
-Required properties:
-- compatible :
-	"atmel,at91sam9261-lcdc" , 
-	"atmel,at91sam9263-lcdc" ,
-	"atmel,at91sam9g10-lcdc" ,
-	"atmel,at91sam9g45-lcdc" ,
-	"atmel,at91sam9g45es-lcdc" ,
-	"atmel,at91sam9rl-lcdc" ,
-	"atmel,at32ap-lcdc"
-- reg : Should contain 1 register ranges(address and length).
-	Can contain an additional register range(address and length)
-	for fixed framebuffer memory. Useful for dedicated memories.
-- interrupts : framebuffer controller interrupt
-- display: a phandle pointing to the display node
-
-Required nodes:
-- display: a display node is required to initialize the lcd panel
-	This should be in the board dts.
-- default-mode: a videomode within the display with timing parameters
-	as specified below.
-
-Optional properties:
-- lcd-supply: Regulator for LCD supply voltage.
-
-Example:
-
-	fb0: fb@00500000 {
-		compatible = "atmel,at91sam9g45-lcdc";
-		reg = <0x00500000 0x1000>;
-		interrupts = <23 3 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_fb>;
-		display = <&display0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-	};
-
-Example for fixed framebuffer memory:
-
-	fb0: fb@00500000 {
-		compatible = "atmel,at91sam9263-lcdc";
-		reg = <0x00700000 0x1000 0x70000000 0x200000>;
-		[...]
-	};
-
-Atmel LCDC Display
------------------------------------------------------
-Required properties (as per of_videomode_helper):
-
- - atmel,dmacon: dma controller configuration
- - atmel,lcdcon2: lcd controller configuration
- - atmel,guard-time: lcd guard time (Delay in frame periods)
- - bits-per-pixel: lcd panel bit-depth.
-
-Optional properties (as per of_videomode_helper):
- - atmel,lcdcon-backlight: enable backlight
- - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
- - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
- - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
-
-Example:
-	display0: display {
-		bits-per-pixel = <32>;
-		atmel,lcdcon-backlight;
-		atmel,dmacon = <0x1>;
-		atmel,lcdcon2 = <0x80008002>;
-		atmel,guard-time = <9>;
-		atmel,lcd-wiring-mode = <1>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <9000000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <1>;
-				hfront-porch = <1>;
-				vback-porch = <40>;
-				vfront-porch = <1>;
-				hsync-len = <45>;
-				vsync-len = <1>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.yaml b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml
new file mode 100644
index 000000000000..1b6f7e395006
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/atmel,lcdc.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel,lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip's LCDC Framebuffer
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The LCDC works with a framebuffer, which is a section of memory that contains
+  a complete frame of data representing pixel values for the display. The LCDC
+  reads the pixel data from the framebuffer and sends it to the LCD panel to
+  render the image.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9261-lcdc
+      - atmel,at91sam9263-lcdc
+      - atmel,at91sam9g10-lcdc
+      - atmel,at91sam9g45-lcdc
+      - atmel,at91sam9g45es-lcdc
+      - atmel,at91sam9rl-lcdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: lcdc_clk
+
+  display:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle pointing to the display node.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - display
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    fb@500000 {
+      compatible = "atmel,at91sam9g45-lcdc";
+      reg = <0x00500000 0x1000>;
+      interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_fb>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
+      clock-names = "hclk", "lcdc_clk";
+      display = <&display>;
+    };
diff --git a/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml b/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml
new file mode 100644
index 000000000000..29ed42485de3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/atmel/atmel,hlcdc-display-controller.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/atmel/atmel,hlcdc-display-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's High LCD Controller (HLCDC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The LCD Controller (LCDC) consists of logic for transferring LCD image
+  data from an external display buffer to a TFT LCD panel. The LCDC has one
+  display input buffer per layer that fetches pixels through the single bus
+  host interface and a look-up table to allow palletized display
+  configurations.
+
+properties:
+  compatible:
+    const: atmel,hlcdc-display-controller
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      reg:
+        maxItems: 1
+
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+        description:
+          Endpoint connecting the LCD panel signals.
+
+        properties:
+          bus-width:
+            enum: [ 12, 16, 18, 24 ]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - port@0
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt b/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
deleted file mode 100644
index 0398aec488ac..000000000000
--- a/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
-
-The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
-See ../../mfd/atmel-hlcdc.txt for more details.
-
-Required properties:
- - compatible: value should be "atmel,hlcdc-display-controller"
- - pinctrl-names: the pin control state names. Should contain "default".
- - pinctrl-0: should contain the default pinctrl states.
- - #address-cells: should be set to 1.
- - #size-cells: should be set to 0.
-
-Required children nodes:
- Children nodes are encoding available output ports and their connections
- to external devices using the OF graph reprensentation (see ../graph.txt).
- At least one port node is required.
-
-Optional properties in grandchild nodes:
- Any endpoint grandchild node may specify a desired video interface
- according to ../../media/video-interfaces.txt, specifically
- - bus-width: recognized values are <12>, <16>, <18> and <24>, and
-   override any output mode selection heuristic, forcing "rgb444",
-   "rgb565", "rgb666" and "rgb888" respectively.
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
-
-Example 2: With a video interface override to force rgb565; as above
-but with these changes/additions:
-
-	&hlcdc {
-		hlcdc-display-controller {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
-
-			port@0 {
-				hlcdc_panel_output: endpoint@0 {
-					bus-width = <16>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index a1d5a32660e0..c1cefd547391 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM2711 HDMI Controller Device Tree Bindings
+title: Broadcom BCM2711 HDMI Controller
 
 maintainers:
   - Eric Anholt <eric@anholt.net>
@@ -14,6 +14,8 @@ properties:
     enum:
       - brcm,bcm2711-hdmi0
       - brcm,bcm2711-hdmi1
+      - brcm,bcm2712-hdmi0
+      - brcm,bcm2712-hdmi1
 
   reg:
     items:
@@ -54,26 +56,15 @@ properties:
       - const: cec
 
   interrupts:
-    items:
-      - description: CEC TX interrupt
-      - description: CEC RX interrupt
-      - description: CEC stuck at low interrupt
-      - description: Wake-up interrupt
-      - description: Hotplug connected interrupt
-      - description: Hotplug removed interrupt
+    minItems: 5
+    maxItems: 6
 
   interrupt-names:
-    items:
-      - const: cec-tx
-      - const: cec-rx
-      - const: cec-low
-      - const: wakeup
-      - const: hpd-connected
-      - const: hpd-removed
+    minItems: 5
+    maxItems: 6
 
   ddc:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: >
       Phandle of the I2C controller used for DDC EDID probing
 
@@ -111,6 +102,61 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm2711-hdmi0
+              - brcm,bcm2711-hdmi1
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CEC TX interrupt
+            - description: CEC RX interrupt
+            - description: CEC stuck at low interrupt
+            - description: Wake-up interrupt
+            - description: Hotplug connected interrupt
+            - description: Hotplug removed interrupt
+        interrupt-names:
+          items:
+            - const: cec-tx
+            - const: cec-rx
+            - const: cec-low
+            - const: wakeup
+            - const: hpd-connected
+            - const: hpd-removed
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm2712-hdmi0
+              - brcm,bcm2712-hdmi1
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CEC TX interrupt
+            - description: CEC RX interrupt
+            - description: CEC stuck at low interrupt
+            - description: Hotplug connected interrupt
+            - description: Hotplug removed interrupt
+        interrupts-names:
+          items:
+            - const: cec-tx
+            - const: cec-rx
+            - const: cec-low
+            - const: hpd-connected
+            - const: hpd-removed
+
+      required:
+        - interrupts
+        - interrupt-names
+
 examples:
   - |
     hdmi0: hdmi@7ef00700 {
@@ -135,6 +181,9 @@ examples:
                     "hd";
         clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
         clock-names = "hdmi", "bvb", "audio", "cec";
+        interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
+        interrupt-names = "cec-tx", "cec-rx", "cec-low", "wakeup",
+                          "hpd-connected", "hpd-removed";
         resets = <&dvp 0>;
         ddc = <&ddc0>;
     };
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
index 2e8566f47e63..9aca38a58a16 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
@@ -13,17 +13,27 @@ properties:
   compatible:
     enum:
       - brcm,bcm2711-hvs
+      - brcm,bcm2712-hvs
       - brcm,bcm2835-hvs
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 3
 
   clocks:
-    maxItems: 1
-    description: Core Clock
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
 
 required:
   - compatible
@@ -32,15 +42,68 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: brcm,bcm2711-hvs
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2711-hvs
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Core Clock
+        interrupts:
+          maxItems: 1
+        clock-names: false
+        interrupt-names: false
+
+      required:
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2712-hvs
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: core
+            - const: disp
+        interrupts:
+          items:
+            - description: Channel 0 End of frame
+            - description: Channel 1 End of frame
+            - description: Channel 2 End of frame
+        interrupt-names:
+          items:
+            - const: ch0-eof
+            - const: ch1-eof
+            - const: ch2-eof
+      required:
+        - clocks
+        - clock-names
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2835-hvs
 
-then:
-  required:
-    - clocks
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        clock-names: false
+        interrupt-names: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
index 4e1ba03f6477..6b5b1d3fbc0b 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
@@ -20,6 +20,9 @@ properties:
       - brcm,bcm2711-pixelvalve2
       - brcm,bcm2711-pixelvalve3
       - brcm,bcm2711-pixelvalve4
+      - brcm,bcm2712-pixelvalve0
+      - brcm,bcm2712-pixelvalve1
+      - brcm,bcm2712-pixelvalve2
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
index bb186197e471..16f45afd2bad 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
@@ -11,7 +11,10 @@ maintainers:
 
 properties:
   compatible:
-    const: brcm,bcm2835-txp
+    enum:
+      - brcm,bcm2712-mop
+      - brcm,bcm2712-moplet
+      - brcm,bcm2835-txp
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
index 49a5e041aa49..2aa9d5d2afff 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
@@ -18,6 +18,7 @@ properties:
   compatible:
     enum:
       - brcm,bcm2711-vc5
+      - brcm,bcm2712-vc6
       - brcm,bcm2835-vc4
       - brcm,cygnus-vc4
 
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
index d3dd7a79b909..d29a0d06187e 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@@ -76,9 +76,8 @@ properties:
 
   adi,input-depth:
     description: Number of bits per color component at the input.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 8, 10, 12 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 10, 12 ]
 
   adi,input-colorspace:
     description: Input color space.
@@ -118,23 +117,21 @@ properties:
 
   ports:
     description:
-      The ADV7511(W)/13 has two video ports and one audio port. This node
-      models their connections as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
-    type: object
+      The ADV7511(W)/13 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
     properties:
       port@0:
         description: Video port for the RGB or YUV input.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@1:
         description: Video port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@2:
         description: Audio port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
 # adi,input-colorspace and adi,input-clock are required except in
 # "rgb 1x" and "yuv444 1x" modes, in which case they must not be
@@ -159,7 +156,6 @@ else:
     adi,input-style: false
     adi,input-justification: false
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
index f36209137c8a..ec89115c74e4 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -9,6 +9,9 @@ title: Analog Devices ADV7533/35 HDMI Encoders
 maintainers:
   - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
 description: |
   The ADV7533 and ADV7535 are HDMI audio and video transmitters
   compatible with HDMI 1.4 and DVI 1.0. They support color space
@@ -87,29 +90,30 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
+
+  "#sound-dai-cells":
+    const: 0
 
   ports:
     description:
-      The ADV7533/35 has two video ports and one audio port. This node
-      models their connections as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
-    type: object
+      The ADV7533/35 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
     properties:
       port@0:
         description:
           Video port for the DSI input. The remote endpoint phandle
           should be a reference to a valid mipi_dsi_host_device.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@1:
         description: Video port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@2:
         description: Audio port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index ab48ab2f4240..a1ed1004651b 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Analogix Semiconductor, Inc.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
 
@@ -16,8 +16,7 @@ description: |
 
 properties:
   compatible:
-    items:
-      - const: analogix,anx7625
+    const: analogix,anx7625
 
   reg:
     maxItems: 1
@@ -43,14 +42,73 @@ properties:
   vdd33-supply:
     description: Regulator that provides the supply 3.3V power.
 
+  analogix,lane0-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane0 PHY.
+      Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
+      [Swing control] setting.
+      Registers 0~9, bit 3:0 is [Boost control], these bits control
+      post cursor manual, increase the [Boost control] to increase
+      Pre-emphasis value.
+      Registers 0~9, bit 6:4 is [Swing control], these bits control
+      swing manual, increase [Swing control] setting to add Vp-p value
+      for each Swing, Pre.
+      Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
+      [R Termination control] setting.
+      Registers 10~19, bit 4:0 is [R select control], these bits are
+      compensation manual, increase it can enhance IO driven strength
+      and Vp-p.
+      Registers 10~19, bit 5:6 is [R termination control], these bits
+      adjust 50ohm impedance of DP tx termination. 00:55 ohm,
+      01:50 ohm(default), 10:45 ohm, 11:40 ohm.
+
+  analogix,lane1-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane1 PHY.
+      DP TX lane1 swing register setting same with lane0
+      swing, please refer lane0-swing property description.
+
+  analogix,audio-enable:
+    type: boolean
+    description: let the driver enable audio HDMI codec function or not.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
-          Video port for MIPI DSI input.
+          MIPI DSI/DPI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint: true
+
+              bus-type:
+                enum: [7]
+                default: 1
+
+              data-lanes: true
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
@@ -75,7 +133,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -87,6 +145,9 @@ examples:
             vdd10-supply = <&pp1000_mipibrdg>;
             vdd18-supply = <&pp1800_mipibrdg>;
             vdd33-supply = <&pp3300_mipibrdg>;
+            analogix,audio-enable;
+            analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+            analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
 
             ports {
                 #address-cells = <1>;
@@ -96,6 +157,8 @@ examples:
                     reg = <0>;
                     anx7625_in: endpoint {
                         remote-endpoint = <&mipi_dsi>;
+                        bus-type = <7>;
+                        data-lanes = <0 1 2 3>;
                     };
                 };
 
@@ -106,5 +169,19 @@ examples:
                     };
                 };
             };
+
+            aux-bus {
+                panel {
+                    compatible = "innolux,n125hce-gn1";
+                    power-supply = <&pp3300_disp_x>;
+                    backlight = <&backlight_lcd0>;
+
+                    port {
+                        panel_in: endpoint {
+                            remote-endpoint = <&anx7625_out>;
+                        };
+                    };
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
index 8e13f27b28ed..4509c496731b 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
 
 maintainers:
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+  - Andrzej Hajda <andrzej.hajda@intel.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
 
 properties:
   compatible:
@@ -15,6 +17,7 @@ properties:
       - analogix,anx7808
       - analogix,anx7812
       - analogix,anx7814
+      - analogix,anx7816
       - analogix,anx7818
 
   reg:
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
new file mode 100644
index 000000000000..62f0521b0924
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix Display Port bridge
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  phys: true
+
+  phy-names:
+    const: dp
+
+  force-hpd:
+    type: boolean
+    description:
+      Indicate driver need force hpd when hpd detect failed, this
+      is used for some eDP screen which don not have a hpd signal.
+
+  hpd-gpios:
+    description:
+      Hotplug detect GPIO.
+      Indicates which GPIO should be used for hotplug detection
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a dp-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - ports
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
deleted file mode 100644
index 027d76c27a41..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Analogix Display Port bridge bindings
-
-Required properties for dp-controller:
-	-compatible:
-		platform specific such as:
-		 * "samsung,exynos5-dp"
-		 * "rockchip,rk3288-dp"
-		 * "rockchip,rk3399-edp"
-	-reg:
-		physical base address of the controller and length
-		of memory mapped region.
-	-interrupts:
-		interrupt combiner values.
-	-clocks:
-		from common clock binding: handle to dp clock.
-	-clock-names:
-		from common clock binding: Shall be "dp".
-	-phys:
-		from general PHY binding: the phandle for the PHY device.
-	-phy-names:
-		from general PHY binding: Should be "dp".
-
-Optional properties for dp-controller:
-	-force-hpd:
-		Indicate driver need force hpd when hpd detect failed, this
-		is used for some eDP screen which don't have hpd signal.
-	-hpd-gpios:
-		Hotplug detect GPIO.
-		Indicates which GPIO should be used for hotplug detection
-	-port@[X]: SoC specific port nodes with endpoint definitions as defined
-		in Documentation/devicetree/bindings/media/video-interfaces.txt,
-		please refer to the SoC specific binding document:
-		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
-		* Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
--------------------------------------------------------------------------------
-
-Example:
-
-	dp-controller {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145b0000 0x10000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
-		clocks = <&clock 342>;
-		clock-names = "dp";
-
-		phys = <&dp_phy>;
-		phy-names = "dp";
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
index 1c0406c38fe5..514f58852990 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/anx6345.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analogix ANX6345 eDP Transmitter Device Tree Bindings
+title: Analogix ANX6345 eDP Transmitter
 
 maintainers:
   - Torsten Duwe <duwe@lst.de>
@@ -61,7 +61,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
deleted file mode 100644
index 525a4bfd8634..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Cadence DSI bridge
-==================
-
-The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes.
-
-Required properties:
-- compatible: should be set to "cdns,dsi".
-- reg: physical base address and length of the controller's registers.
-- interrupts: interrupt line connected to the DSI bridge.
-- clocks: DSI bridge clocks.
-- clock-names: must contain "dsi_p_clk" and "dsi_sys_clk".
-- phys: phandle link to the MIPI D-PHY controller.
-- phy-names: must contain "dphy".
-- #address-cells: must be set to 1.
-- #size-cells: must be set to 0.
-
-Optional properties:
-- resets: DSI reset lines.
-- reset-names: can contain "dsi_p_rst".
-
-Required subnodes:
-- ports: Ports as described in Documentation/devicetree/bindings/graph.txt.
-  2 ports are available:
-  * port 0: this port is only needed if some of your DSI devices are
-	    controlled through  an external bus like I2C or SPI. Can have at
-	    most 4 endpoints. The endpoint number is directly encoding the
-	    DSI virtual channel used by this device.
-  * port 1: represents the DPI input.
-  Other ports will be added later to support the new kind of inputs.
-
-- one subnode per DSI device connected on the DSI bus. Each DSI device should
-  contain a reg property encoding its virtual channel.
-
-Example:
-	dsi0: dsi@fd0c0000 {
-		compatible = "cdns,dsi";
-		reg = <0x0 0xfd0c0000 0x0 0x1000>;
-		clocks = <&pclk>, <&sysclk>;
-		clock-names = "dsi_p_clk", "dsi_sys_clk";
-		interrupts = <1>;
-		phys = <&dphy0>;
-		phy-names = "dphy";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				dsi0_dpi_input: endpoint {
-					remote-endpoint = <&xxx_dpi_output>;
-				};
-			};
-		};
-
-		panel: dsi-dev@0 {
-			compatible = "<vendor,panel>";
-			reg = <0>;
-		};
-	};
-
-or
-
-	dsi0: dsi@fd0c0000 {
-		compatible = "cdns,dsi";
-		reg = <0x0 0xfd0c0000 0x0 0x1000>;
-		clocks = <&pclk>, <&sysclk>;
-		clock-names = "dsi_p_clk", "dsi_sys_clk";
-		interrupts = <1>;
-		phys = <&dphy1>;
-		phy-names = "dphy";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				dsi0_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&dsi_panel_input>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				dsi0_dpi_input: endpoint {
-					remote-endpoint = <&xxx_dpi_output>;
-				};
-			};
-		};
-	};
-
-	i2c@xxx {
-		panel: panel@59 {
-			compatible = "<vendor,panel>";
-			reg = <0x59>;
-
-			port {
-				dsi_panel_input: endpoint {
-					remote-endpoint = <&dsi0_output>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml
new file mode 100644
index 000000000000..23060324d16e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DSI bridge
+
+maintainers:
+  - Boris Brezillon <boris.brezillon@bootlin.com>
+
+description: |
+   CDNS DSI is a bridge device which converts DPI to DSI
+
+properties:
+  compatible:
+    enum:
+      - cdns,dsi
+      - ti,j721e-dsi
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Register block for controller's registers.
+      - description:
+          Register block for wrapper settings registers in case of TI J7 SoCs.
+
+  clocks:
+    items:
+      - description: PSM clock, used by the IP
+      - description: sys clock, used by the IP
+
+  clock-names:
+    items:
+      - const: dsi_p_clk
+      - const: dsi_sys_clk
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: dsi_p_rst
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port representing the DSI output. It can have
+          at most 4 endpoints. The endpoint number is directly encoding
+          the DSI virtual channel used by this device.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port representing the DPI input.
+
+    required:
+      - port@1
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-dsi
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        power-domains:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi@fd0c0000 {
+            compatible = "cdns,dsi";
+            reg = <0x0 0xfd0c0000 0x0 0x1000>;
+            clocks = <&pclk>, <&sysclk>;
+            clock-names = "dsi_p_clk", "dsi_sys_clk";
+            interrupts = <1>;
+            phys = <&dphy0>;
+            phy-names = "dphy";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                    };
+                };
+            };
+
+            panel@0 {
+                compatible = "panasonic,vvx10f034n00";
+                reg = <0>;
+                power-supply = <&vcc_lcd_reg>;
+            };
+        };
+    };
+
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi@fd0c0000 {
+            compatible = "cdns,dsi";
+            reg = <0x0 0xfd0c0000 0x0 0x1000>;
+            clocks = <&pclk>, <&sysclk>;
+            clock-names = "dsi_p_clk", "dsi_sys_clk";
+            interrupts = <1>;
+            phys = <&dphy1>;
+            phy-names = "dphy";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&dsi_panel_input>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
index b2e8bc6da9d0..c2b369456e4e 100644
--- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Cadence MHDP8546 bridge
 
diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
index 62c3bd4cb28d..5fb54375aeb6 100644
--- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -24,6 +24,15 @@ properties:
     maxItems: 1
     description: virtual channel number of a DSI peripheral
 
+  clock-names:
+    const: refclk
+
+  clocks:
+    maxItems: 1
+    description: |
+        Optional external clock connected to REF_CLK input.
+        The clock rate must be in 10..154 MHz range.
+
   enable-gpios:
     description: Bridge EN pin, chip is reset when EN is low.
 
@@ -41,17 +50,32 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
           Video port for MIPI DSI input
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:
           Video port for MIPI DPI output (panel or connector).
 
     required:
-      - port@0
       - port@1
 
 required:
diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
index bb6289c7d375..b0589fa16736 100644
--- a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Chrontel CH7033 Video Encoder Device Tree Bindings
+title: Chrontel CH7033 Video Encoder
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
new file mode 100644
index 000000000000..6211ab8bbb0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8mp-hdmi-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DWC HDMI TX Encoder
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The i.MX8MP HDMI transmitter is a Synopsys DesignWare
+  HDMI 2.0a TX controller IP.
+
+allOf:
+  - $ref: /schemas/display/bridge/synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mp-hdmi-tx
+
+  reg-io-width:
+    const: 1
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: iahb
+      - const: isfr
+      - const: cec
+      - const: pix
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel audio input port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    hdmi@32fd8000 {
+        compatible = "fsl,imx8mp-hdmi-tx";
+        reg = <0x32fd8000 0x7eff>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+                 <&clk IMX8MP_CLK_HDMI_REF_266M>,
+                 <&clk IMX8MP_CLK_32K>,
+                 <&hdmi_tx_phy>;
+        clock-names = "iahb", "isfr", "cec", "pix";
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+        reg-io-width = <1>;
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&pvi_to_hdmi_tx>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&hdmi0_con>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+
+                endpoint {
+                    remote-endpoint = <&pai_to_hdmi_tx>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
new file mode 100644
index 000000000000..94543006f5de
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp LVDS Display Bridge
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels.
+
+  The i.MX8qm/qxp LDB is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the LDB's configuration
+  registers.
+
+  For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color
+  format and can map the input to VESA or JEIDA standards.  The two channels
+  cannot be used simultaneously, that is to say, the user should pick one of
+  them to use.  Two LDB channels from two LDB instances can work together in
+  LDB split mode to support a dual link LVDS display.  The channel indexes
+  have to be different.  Channel0 outputs odd pixels and channel1 outputs
+  even pixels.
+
+  For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel
+  input color format.  The two channels can be used simultaneously, either
+  in dual mode or split mode.  In dual mode, the two channels output identical
+  data.  In split mode, channel0 outputs odd pixels and channel1 outputs even
+  pixels.
+
+  A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in
+  the SoC reference manuals.  The pixel mapper uses logic of LDBs embedded in
+  i.MX6qdl/sx SoCs, i.e., it is essentially based on them.  To keep the naming
+  consistency, this binding calls it LDB.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-ldb
+      - fsl,imx8qxp-ldb
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: pixel clock
+      - description: bypass clock
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: bypass
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-ldb:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion LDB which is used in LDB split mode.
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a channel of LDB.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The channel index.
+        enum: [ 0, 1 ]
+
+      phys:
+        description: A phandle to the phy module representing the LVDS PHY.
+        maxItems: 1
+
+      phy-names:
+        const: lvds_phy
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port of the channel.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port of the channel.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - phys
+      - phy-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - power-domains
+  - channel@0
+  - channel@1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-ldb
+    then:
+      properties:
+        fsl,companion-ldb: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    ldb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx8qxp-ldb";
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                 <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+        clock-names = "pixel", "bypass";
+        power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
new file mode 100644
index 000000000000..50bae2122183
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Pixel Combiner
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Pixel Combiner takes two output streams from a
+  single display controller and manipulates the two streams to support a number
+  of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as
+  either one screen, two screens, or virtual screens.  The pixel combiner is
+  also responsible for generating some of the control signals for the pixel link
+  output channel.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-pixel-combiner
+      - fsl,imx8qxp-pixel-combiner
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: apb
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a display stream of pixel combiner.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The display stream index.
+        enum: [ 0, 1 ]
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the display stream.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the display stream.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pixel-combiner@56020000 {
+        compatible = "fsl,imx8qxp-pixel-combiner";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x56020000 0x10000>;
+        clocks = <&dc0_pixel_combiner_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "apb";
+        power-domains = <&pd IMX_SC_R_DC_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch0_dc0_dpu_disp0: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp0_dc0_pixel_combiner_ch0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch0_dc0_pixel_link0: endpoint {
+                    remote-endpoint = <&dc0_pixel_link0_dc0_pixel_combiner_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch1_dc0_dpu_disp1: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp1_dc0_pixel_combiner_ch1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch1_dc0_pixel_link1: endpoint {
+                    remote-endpoint = <&dc0_pixel_link1_dc0_pixel_combiner_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
new file mode 100644
index 000000000000..38ecc7926fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Display Pixel Link
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard
+  asynchronous linkage between pixel sources(display controller or
+  camera module) and pixel consumers(imaging or displays).
+  It consists of two distinct functions, a pixel transfer function and a
+  control interface.  Multiple pixel channels can exist per one control channel.
+  This binding documentation is only for pixel links whose pixel sources are
+  display controllers.
+
+  The i.MX8qm/qxp Display Pixel Link is accessed via System Controller Unit(SCU)
+  firmware.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-dc-pixel-link
+      - fsl,imx8qxp-dc-pixel-link
+
+  fsl,dc-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller index that the pixel link
+      connects to.
+
+  fsl,dc-stream-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller stream index that the pixel
+      link connects to.
+    enum: [0, 1]
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link input port node from upstream video source.
+
+    patternProperties:
+      "^port@[1-4]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          const: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          enum: [0, 1]
+
+required:
+  - compatible
+  - fsl,dc-id
+  - fsl,dc-stream-id
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dc0-pixel-link0 {
+        compatible = "fsl,imx8qxp-dc-pixel-link";
+        fsl,dc-id = /bits/ 8 <0>;
+        fsl,dc-stream-id = /bits/ 8 <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* from dc0 pixel combiner channel0 */
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint {
+                    remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>;
+                };
+            };
+
+            /* to PXL2DPIs in MIPI/LVDS combo subsystems */
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>;
+                };
+
+                dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>;
+                };
+            };
+
+            /* unused */
+            port@2 {
+                reg = <2>;
+            };
+
+            /* unused */
+            port@3 {
+                reg = <3>;
+            };
+
+            /* to imaging subsystem */
+            port@4 {
+                reg = <4>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
new file mode 100644
index 000000000000..e4e77fad05f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI)
+  interfaces the pixel link 36-bit data output and the DSI controller’s
+  MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module
+  used in LVDS mode, to remap the pixel color codings between those modules.
+  This module is purely combinatorial.
+
+  The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the PXL2DPI's configuration
+  register.
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-pxl2dpi
+
+  fsl,sc-resource:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The SCU resource ID associated with this PXL2DPI instance.
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-pxl2dpi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion PXL2DPI which is used by downstream
+      LVDS Display Bridge(LDB) in split mode.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI input port node from pixel link.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - fsl,sc-resource
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pxl2dpi {
+        compatible = "fsl,imx8qxp-pxl2dpi";
+        fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+        power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 {
+                     reg = <1>;
+                     remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx93-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx93-mipi-dsi.yaml
new file mode 100644
index 000000000000..d6e51d0cf546
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx93-mipi-dsi.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx93-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX93 specific extensions to Synopsys Designware MIPI DSI
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  There is a Synopsys Designware MIPI DSI Host Controller and a Synopsys
+  Designware MIPI DPHY embedded in Freescale i.MX93 SoC.  Some configurations
+  and extensions to them are controlled by i.MX93 media blk-ctrl.
+
+allOf:
+  - $ref: snps,dw-mipi-dsi.yaml#
+
+properties:
+  compatible:
+    const: fsl,imx93-mipi-dsi
+
+  clocks:
+    items:
+      - description: apb clock
+      - description: pixel clock
+      - description: PHY configuration clock
+      - description: PHY reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: pix
+      - const: phy_cfg
+      - const: phy_ref
+
+  interrupts:
+    maxItems: 1
+
+  fsl,media-blk-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      i.MX93 media blk-ctrl, as a syscon, controls pixel component bit map
+      configurations from LCDIF display controller to the MIPI DSI host
+      controller and MIPI DPHY PLL related configurations through PLL SoC
+      interface.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - fsl,media-blk-ctrl
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/fsl,imx93-power.h>
+
+    dsi@4ae10000 {
+        compatible = "fsl,imx93-mipi-dsi";
+        reg = <0x4ae10000 0x10000>;
+        interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX93_CLK_MIPI_DSI_GATE>,
+                 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+                 <&clk IMX93_CLK_MIPI_PHY_CFG>,
+                 <&clk IMX93_CLK_24M>;
+        clock-names = "pclk", "pix", "phy_cfg", "phy_ref";
+        fsl,media-blk-ctrl = <&media_blk_ctrl>;
+        power-domains = <&media_blk_ctrl IMX93_MEDIABLK_PD_MIPI_DSI>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "raydium,rm67191";
+            reg = <0>;
+            reset-gpios = <&adp5585gpio 6 GPIO_ACTIVE_LOW>;
+            dsi-lanes = <4>;
+            video-mode = <2>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dsi_to_lcdif: endpoint {
+                    remote-endpoint = <&lcdif_to_dsi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dsi_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
new file mode 100644
index 000000000000..07388bf2b90d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DPI to LVDS bridge chip
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The i.MX8MP mediamix contains two registers which are responsible
+  for configuring the on-SoC DPI-to-LVDS serializer. This describes
+  those registers as bridge within the DT.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-ldb
+      - fsl,imx8mp-ldb
+      - fsl,imx93-ldb
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ldb
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ldb
+      - const: lvds
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-A output (panel or bridge).
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-B output (panel or bridge).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - clocks
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sx-ldb
+              - fsl,imx93-ldb
+    then:
+      properties:
+        ports:
+          properties:
+            port@2: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    blk-ctrl {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        bridge@5c {
+            compatible = "fsl,imx8mp-ldb";
+            clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+            clock-names = "ldb";
+            reg = <0x5c 0x4>, <0x128 0x4>;
+            reg-names = "ldb", "lvds";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    ldb_from_lcdif2: endpoint {
+                        remote-endpoint = <&lcdif2_to_ldb>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    ldb_lvds_ch0: endpoint {
+                        remote-endpoint = <&ldb_to_lvdsx4panel>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    ldb_lvds_ch1: endpoint {
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
index 9f7cc6b757cb..a44d025d33bd 100644
--- a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
@@ -8,7 +8,6 @@ title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port
 
 maintainers:
   - Nicolas Boichat <drinkcat@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to
@@ -79,4 +78,3 @@ examples:
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
new file mode 100644
index 000000000000..84df3cf239d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ4780 HDMI Transmitter
+
+maintainers:
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+description: |
+  The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4
+  TX controller IP with accompanying PHY IP.
+
+allOf:
+  - $ref: synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    const: ingenic,jz4780-dw-hdmi
+
+  reg-io-width:
+    const: 4
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from LCD controller output.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Link to the HDMI connector.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg-io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    hdmi: hdmi@10180000 {
+        compatible = "ingenic,jz4780-dw-hdmi";
+        reg = <0x10180000 0x8000>;
+        reg-io-width = <4>;
+        interrupt-parent = <&intc>;
+        interrupts = <3>;
+        clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+        clock-names = "iahb", "isfr";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            hdmi_in: port@0 {
+                reg = <0>;
+                dw_hdmi_in: endpoint {
+                    remote-endpoint = <&jz4780_lcd_out>;
+                };
+            };
+            hdmi_out: port@1 {
+                reg = <1>;
+                dw_hdmi_out: endpoint {
+                    remote-endpoint = <&hdmi_con>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
index dcb1336ee2a5..958a073f4ff7 100644
--- a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for Intel Keem Bay mipi dsi controller
+title: Intel Keem Bay mipi dsi controller
 
 maintainers:
   - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
new file mode 100644
index 000000000000..b98d942bbe19
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
@@ -0,0 +1,251 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE IT6263 LVDS to HDMI converter
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The IT6263 is a high-performance single-chip De-SSC(De-Spread Spectrum) LVDS
+  to HDMI converter.  Combined with LVDS receiver and HDMI 1.4a transmitter,
+  the IT6263 supports LVDS input and HDMI 1.4 output by conversion function.
+  The built-in LVDS receiver can support single-link and dual-link LVDS inputs,
+  and the built-in HDMI transmitter is fully compliant with HDMI 1.4a/3D, HDCP
+  1.2 and backward compatible with DVI 1.0 specification.
+
+  The IT6263 also encodes and transmits up to 8 channels of I2S digital audio,
+  with sampling rate up to 192KHz and sample size up to 24 bits. In addition,
+  an S/PDIF input port takes in compressed audio of up to 192KHz frame rate.
+
+  The newly supported High-Bit Rate(HBR) audio by HDMI specifications v1.3 is
+  provided by the IT6263 in two interfaces: the four I2S input ports or the
+  S/PDIF input port.  With both interfaces the highest possible HBR frame rate
+  is supported at up to 768KHz.
+
+allOf:
+  - $ref: /schemas/display/lvds-dual-ports.yaml#
+  - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+  compatible:
+    const: ite,it6263
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: audio master clock
+
+  clock-names:
+    const: mclk
+
+  data-mapping:
+    enum:
+      - jeida-18
+      - jeida-24
+      - jeida-30
+      - vesa-24
+      - vesa-30
+
+  reset-gpios:
+    maxItems: 1
+
+  ivdd-supply:
+    description: 1.8V digital logic power
+
+  ovdd-supply:
+    description: 3.3V I/O pin power
+
+  txavcc18-supply:
+    description: 1.8V HDMI analog frontend power
+
+  txavcc33-supply:
+    description: 3.3V HDMI analog frontend power
+
+  pvcc1-supply:
+    description: 1.8V HDMI frontend core PLL power
+
+  pvcc2-supply:
+    description: 1.8V HDMI frontend filter PLL power
+
+  avcc-supply:
+    description: 3.3V LVDS frontend power
+
+  anvdd-supply:
+    description: 1.8V LVDS frontend analog power
+
+  apvdd-supply:
+    description: 1.8V LVDS frontend PLL power
+
+  "#sound-dai-cells":
+    const: 0
+
+  ite,i2s-audio-fifo-sources:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [0, 1, 2, 3]
+    description:
+      Each array element indicates the pin number of an I2S serial data input
+      line which is connected to an audio FIFO, from audio FIFO0 to FIFO3.
+
+  ite,rl-channel-swap-audio-sources:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    uniqueItems: true
+    items:
+      enum: [0, 1, 2, 3]
+    description:
+      Each array element indicates an audio source whose right channel and left
+      channel are swapped by this converter. For I2S, the element is the pin
+      number of an I2S serial data input line. For S/PDIF, the element is always
+      0.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0: true
+
+      port@1:
+        oneOf:
+          - required: [dual-lvds-odd-pixels]
+          - required: [dual-lvds-even-pixels]
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: video port for the HDMI output
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: sound input port
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - data-mapping
+  - ivdd-supply
+  - ovdd-supply
+  - txavcc18-supply
+  - txavcc33-supply
+  - pvcc1-supply
+  - pvcc2-supply
+  - avcc-supply
+  - anvdd-supply
+  - apvdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* single-link LVDS input */
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi@4c {
+            compatible = "ite,it6263";
+            reg = <0x4c>;
+            data-mapping = "jeida-24";
+            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+            ivdd-supply = <&reg_buck5>;
+            ovdd-supply = <&reg_vext_3v3>;
+            txavcc18-supply = <&reg_buck5>;
+            txavcc33-supply = <&reg_vext_3v3>;
+            pvcc1-supply = <&reg_buck5>;
+            pvcc2-supply = <&reg_buck5>;
+            avcc-supply = <&reg_vext_3v3>;
+            anvdd-supply = <&reg_buck5>;
+            apvdd-supply = <&reg_buck5>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    it6263_lvds_link1: endpoint {
+                        remote-endpoint = <&ldb_lvds_ch0>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    it6263_out: endpoint {
+                        remote-endpoint = <&hdmi_in>;
+                    };
+                };
+            };
+        };
+    };
+
+  - |
+    /* dual-link LVDS input */
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi@4c {
+            compatible = "ite,it6263";
+            reg = <0x4c>;
+            data-mapping = "jeida-24";
+            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+            ivdd-supply = <&reg_buck5>;
+            ovdd-supply = <&reg_vext_3v3>;
+            txavcc18-supply = <&reg_buck5>;
+            txavcc33-supply = <&reg_vext_3v3>;
+            pvcc1-supply = <&reg_buck5>;
+            pvcc2-supply = <&reg_buck5>;
+            avcc-supply = <&reg_vext_3v3>;
+            anvdd-supply = <&reg_buck5>;
+            apvdd-supply = <&reg_buck5>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dual-lvds-odd-pixels;
+
+                    it6263_lvds_link1_dual: endpoint {
+                        remote-endpoint = <&ldb_lvds_ch0>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dual-lvds-even-pixels;
+
+                    it6263_lvds_link2_dual: endpoint {
+                        remote-endpoint = <&ldb_lvds_ch1>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    it6263_out_dual: endpoint {
+                        remote-endpoint = <&hdmi_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
index 833d11b2303a..c4469f463978 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
@@ -4,11 +4,14 @@
 $id: http://devicetree.org/schemas/display/bridge/ite,it6505.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ITE it6505 Device Tree Bindings
+title: ITE it6505
 
 maintainers:
   - Allen Chen <allen.chen@ite.com.tw>
 
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
 description: |
   The IT6505 is a high-performance DisplayPort 1.1a transmitter,
   fully compliant with DisplayPort 1.1a, HDCP 1.3 specifications.
@@ -52,9 +55,52 @@ properties:
     maxItems: 1
     description: extcon specifier for the Power Delivery
 
-  port:
-    $ref: /schemas/graph.yaml#/properties/port
-    description: A port node pointing to DPI host port node
+  "#sound-dai-cells":
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: A port node pointing to DPI host port node
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              link-frequencies:
+                minItems: 1
+                maxItems: 1
+                description: Allowed max link frequencies in Hz
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for DP output
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                uniqueItems: true
+                items:
+                  - enum: [ 0, 1 ]
+                  - const: 1
+                  - const: 2
+                  - const: 3
+
+    required:
+      - port@0
+      - port@1
 
 required:
   - compatible
@@ -63,8 +109,9 @@ required:
   - interrupts
   - reset-gpios
   - extcon
+  - ports
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -85,9 +132,24 @@ examples:
             reset-gpios = <&pio 179 1>;
             extcon = <&usbc_extcon>;
 
-            port {
-                it6505_in: endpoint {
-                    remote-endpoint = <&dpi_out>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    it6505_in: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                        link-frequencies = /bits/ 64 <150000000>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    it6505_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                        data-lanes = <0 1>;
+                    };
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
index 6ec1d5fbb8bc..17d1f97ce8c2 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
@@ -4,11 +4,11 @@
 $id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ITE it66121 HDMI bridge Device Tree Bindings
+title: ITE it66121 HDMI bridge
 
 maintainers:
   - Phong LE <ple@baylibre.com>
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The IT66121 is a high-performance and low-power single channel HDMI
@@ -17,7 +17,10 @@ description: |
 
 properties:
   compatible:
-    const: ite,it66121
+    enum:
+      - ite,it66121
+      - ite,it66122
+      - ite,it6610
 
   reg:
     maxItems: 1
@@ -38,6 +41,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  "#sound-dai-cells":
+    const: 0
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -79,7 +85,10 @@ required:
   - interrupts
   - ports
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
index 674891ee2f8e..2cef25215798 100644
--- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
@@ -55,6 +55,27 @@ properties:
       - port@0
       - port@1
 
+  vcchdmipll-supply:
+    description: A 1.8V supply that powers the HDMI PLL.
+
+  vcchdmitx-supply:
+    description: A 1.8V supply that powers the HDMI TX part.
+
+  vcclvdspll-supply:
+    description: A 1.8V supply that powers the LVDS PLL.
+
+  vcclvdstx-supply:
+    description: A 1.8V supply that powers the LVDS TX part.
+
+  vccmipirx-supply:
+    description: A 1.8V supply that powers the MIPI RX part.
+
+  vccsysclk-supply:
+    description: A 1.8V supply that powers the SYSCLK.
+
+  vdd-supply:
+    description: A 1.8V supply that powers the digital part.
+
 required:
   - compatible
   - reg
@@ -67,7 +88,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c4 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
new file mode 100644
index 000000000000..9a6e9b25d14a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS
+  or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI.
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt9211
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  vccio-supply:
+    description: Regulator for 1.8V IO power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI input or
+          LVDS port-1 for LVDS input or DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI input or LVDS port-2
+          for LVDS input. Used in combination with primary
+          port-1 to drive higher resolution displays
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI output or
+          LVDS port-1 for LVDS output or DPI output.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI output or LVDS port-2
+          for LVDS output. Used in combination with primary
+          port-1 to drive higher resolution displays.
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - vccio-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@3b {
+        compatible = "lontium,lt9211";
+        reg = <0x3b>;
+
+        reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+        interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+        vccio-supply = <&lt9211_1v8>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+
+            endpoint {
+              remote-endpoint = <&panel_in_lvds>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
index 5b9d36f7af30..655db8cfdc25 100644
--- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
@@ -69,7 +69,10 @@ required:
   - vcc-supply
   - ports
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 1faae3e323a4..4f7d3e9cf0c2 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -39,7 +39,10 @@ properties:
           - const: lvds-encoder # Generic LVDS encoder compatible fallback
       - items:
           - enum:
+              - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver
               - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
+              - ti,sn65lvds822  # For the SN65LVDS822 FlatLink LVDS Receiver
+              - ti,sn65lvds94 # For the SN65DS94 LVDS serdes
           - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
           - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
@@ -50,6 +53,7 @@ properties:
     properties:
       port@0:
         $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
           For LVDS encoders, port 0 is the parallel input
           For LVDS decoders, port 0 is the LVDS input
@@ -67,7 +71,7 @@ properties:
                   - vesa-24
                 description: |
                   The color signals mapping order. See details in
-                  Documentation/devicetree/bindings/display/panel/lvds.yaml
+                  Documentation/devicetree/bindings/display/lvds.yaml
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
@@ -79,6 +83,14 @@ properties:
       - port@0
       - port@1
 
+  pclk-sample:
+    description:
+      Data sampling on rising or falling edge.
+    enum:
+      - 0  # Falling edge
+      - 1  # Rising edge
+    default: 0
+
   powerdown-gpios:
     description:
       The GPIO used to control the power down line of this device.
@@ -86,21 +98,32 @@ properties:
 
   power-supply: true
 
-if:
-  not:
-    properties:
-      compatible:
-        contains:
-          const: lvds-decoder
-then:
-  properties:
-    ports:
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-decoder
+    then:
       properties:
-        port@0:
+        ports:
           properties:
-            endpoint:
+            port@0:
               properties:
-                data-mapping: false
+                endpoint:
+                  properties:
+                    data-mapping: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-encoder
+    then:
+      properties:
+        pclk-sample: false
 
 required:
   - compatible
@@ -108,7 +131,6 @@ required:
 
 additionalProperties: false
 
-
 examples:
   - |
     lvds-encoder {
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml b/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml
new file mode 100644
index 000000000000..dfa6ff6f115e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/megachips,stdp2690-ge-b850v3-fw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GE B850v3 video bridge
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+   STDP4028-ge-b850v3-fw bridges (LVDS-DP)
+   STDP2690-ge-b850v3-fw bridges (DP-DP++)
+
+   The video processing pipeline on the second output on the GE B850v3:
+
+   Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
+
+   Each bridge has a dedicated flash containing firmware for supporting the custom
+   design. The result is that, in this design, neither the STDP4028 nor the
+   STDP2690 behave as the stock bridges would. The compatible strings include the
+   suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
+   the firmware specific for the GE B850v3.
+
+   The hardware do not provide control over the video processing pipeline, as the
+   two bridges behaves as a single one. The only interfaces exposed by the
+   hardware are EDID, HPD, and interrupts.
+
+properties:
+  compatible:
+    enum:
+      - megachips,stdp4028-ge-b850v3-fw
+      - megachips,stdp2690-ge-b850v3-fw
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        description: sink port
+        $ref: /schemas/graph.yaml#/properties/port
+
+      port@1:
+        description: source port
+        $ref: /schemas/graph.yaml#/properties/port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: megachips,stdp4028-ge-b850v3-fw
+    then:
+      required:
+        - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@73 {
+            compatible = "megachips,stdp4028-ge-b850v3-fw";
+            reg = <0x73>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    endpoint {
+                        remote-endpoint = <&lvds0_out>;
+                    };
+
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    endpoint {
+                        remote-endpoint = <&stdp2690_in>;
+                    };
+               };
+            };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt b/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
deleted file mode 100644
index 09e0a21f705e..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-Drivers for the second video output of the GE B850v3:
-   STDP4028-ge-b850v3-fw bridges (LVDS-DP)
-   STDP2690-ge-b850v3-fw bridges (DP-DP++)
-
-The video processing pipeline on the second output on the GE B850v3:
-
-   Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
-
-Each bridge has a dedicated flash containing firmware for supporting the custom
-design. The result is that, in this design, neither the STDP4028 nor the
-STDP2690 behave as the stock bridges would. The compatible strings include the
-suffix "-ge-b850v3-fw" to make it clear that the driver is for the bridges with
-the firmware specific for the GE B850v3.
-
-The hardware do not provide control over the video processing pipeline, as the
-two bridges behaves as a single one. The only interfaces exposed by the
-hardware are EDID, HPD, and interrupts.
-
-stdp4028-ge-b850v3-fw required properties:
-  - compatible : "megachips,stdp4028-ge-b850v3-fw"
-  - reg : I2C bus address
-  - interrupts : one interrupt should be described here, as in
-    <0 IRQ_TYPE_LEVEL_HIGH>
-  - ports : One input port(reg = <0>) and one output port(reg = <1>)
-
-stdp2690-ge-b850v3-fw required properties:
-    compatible : "megachips,stdp2690-ge-b850v3-fw"
-  - reg : I2C bus address
-  - ports : One input port(reg = <0>) and one output port(reg = <1>)
-
-Example:
-
-&mux2_i2c2 {
-	clock-frequency = <100000>;
-
-	stdp4028@73 {
-		compatible = "megachips,stdp4028-ge-b850v3-fw";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg = <0x73>;
-
-		interrupt-parent = <&gpio2>;
-		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				stdp4028_in: endpoint {
-					remote-endpoint = <&lvds0_out>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				stdp4028_out: endpoint {
-					remote-endpoint = <&stdp2690_in>;
-				};
-			};
-		};
-	};
-
-	stdp2690@72 {
-		compatible = "megachips,stdp2690-ge-b850v3-fw";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg = <0x72>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				stdp2690_in: endpoint {
-					remote-endpoint = <&stdp4028_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				stdp2690_out: endpoint {
-					/* Connector for external display */
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-lvds.yaml b/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-lvds.yaml
new file mode 100644
index 000000000000..862ef441ac9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/microchip,sam9x75-lvds.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/microchip,sam9x75-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip SAM9X75 LVDS Controller
+
+maintainers:
+  - Dharma Balasubiramani <dharma.b@microchip.com>
+
+description:
+  The Low Voltage Differential Signaling Controller (LVDSC) manages data
+  format conversion from the LCD Controller internal DPI bus to OpenLDI
+  LVDS output signals. LVDSC functions include bit mapping, balanced mode
+  management, and serializer.
+
+properties:
+  compatible:
+    const: microchip,sam9x75-lvds
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral Bus Clock
+
+  clock-names:
+    items:
+      - const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/at91.h>
+    lvds-controller@f8060000 {
+      compatible = "microchip,sam9x75-lvds";
+      reg = <0xf8060000 0x100>;
+      interrupts = <56 IRQ_TYPE_LEVEL_HIGH 0>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+      clock-names = "pclk";
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
index 350fb8f400f0..5952e6448ed4 100644
--- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -111,11 +111,27 @@ properties:
         unevaluatedProperties: false
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
           DSI output port node to the panel or the next bridge
           in the chain
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
     required:
       - port@0
       - port@1
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
new file mode 100644
index 000000000000..70ec70922c13
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3460 eDP to LVDS bridge
+
+maintainers:
+  - Sean Paul <seanpaul@chromium.org>
+
+properties:
+  compatible:
+    const: nxp,ptn3460
+
+  reg:
+    description: I2C address of the bridge
+    maxItems: 1
+
+  edid-emulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The EDID emulation entry to use
+      Value  Resolution  Description
+        0     1024x768   NXP Generic
+        1     1920x1080  NXP Generic
+        2     1920x1080  NXP Generic
+        3     1600x900   Samsung LTM200KT
+        4     1920x1080  Samsung LTM230HT
+        5     1366x768   NXP Generic
+        6     1600x900   ChiMei M215HGE
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+  powerdown-gpios:
+    description: GPIO connected to the PD_N signal.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the RST_N signal.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for LVDS output
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for eDP input
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - edid-emulation
+  - powerdown-gpios
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@20 {
+        compatible = "nxp,ptn3460";
+        reg = <0x20>;
+        edid-emulation = <5>;
+        powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            bridge_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            bridge_in: endpoint {
+              remote-endpoint = <&dp_out>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
new file mode 100644
index 000000000000..3fce9e698ea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,tda998x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TDA998x HDMI transmitter
+
+maintainers:
+  - Russell King <linux@armlinux.org.uk>
+
+properties:
+  compatible:
+    const: nxp,tda998x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  video-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x230145
+    maximum: 0xffffff
+    description:
+      24 bits value which defines how the video controller output is wired to
+      the TDA998x input.
+
+  audio-ports:
+    description:
+      Array of 2 values per DAI (Documentation/sound/soc/dai.rst).
+      The implementation allows one or two DAIs.
+      If two DAIs are defined, they must be of different type.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 2
+    items:
+      items:
+        - description: |
+            The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S
+            (see include/dt-bindings/display/tda998x.h).
+          enum: [ 1, 2 ]
+        - description:
+            The second value defines the tda998x AP_ENA reg content when the
+            DAI in question is used.
+          maximum: 0xff
+
+  '#sound-dai-cells':
+    enum: [ 0, 1 ]
+
+  nxp,calib-gpios:
+    maxItems: 1
+    description:
+      Calibration GPIO, which must correspond with the gpio used for the
+      TDA998x interrupt pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Parallel input port
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        type: object
+        description: Parallel input port
+
+      port@1:
+        type: object
+        description: HDMI output port
+
+required:
+  - compatible
+  - reg
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/tda998x.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tda998x: hdmi-encoder@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            video-ports = <0x230145>;
+
+            #sound-dai-cells = <1>;
+                         /* DAI-format / AP_ENA reg value */
+            audio-ports = <TDA998x_SPDIF 0x04>,
+                          <TDA998x_I2S 0x03>;
+
+            port {
+                tda998x_in: endpoint {
+                    remote-endpoint = <&lcdc_0>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml
new file mode 100644
index 000000000000..235018a81e85
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/parade,ps8622.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parade PS8622/PS8625 DisplayPort to LVDS Converter
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - parade,ps8622
+      - parade,ps8625
+
+  reg:
+    maxItems: 1
+
+  lane-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    description: Number of DP lanes to use.
+
+  use-external-pwm:
+    type: boolean
+    description: Backlight will be controlled by an external PWM.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to RST_ pin.
+
+  sleep-gpios:
+    maxItems: 1
+    description: GPIO connected to PD_ pin.
+
+  vdd12-supply: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS output.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DisplayPort input.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - sleep-gpios
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: parade,ps8622
+    then:
+      properties:
+        lane-count:
+          const: 1
+    else:
+      properties:
+        lane-count:
+          const: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lvds-bridge@48 {
+            compatible = "parade,ps8625";
+            reg = <0x48>;
+            sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
+            lane-count = <2>;
+            use-external-pwm;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    bridge_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in: endpoint {
+                        remote-endpoint = <&dp_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8622.txt b/Documentation/devicetree/bindings/display/bridge/ps8622.txt
deleted file mode 100644
index c989c3807f2b..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/ps8622.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-ps8622-bridge bindings
-
-Required properties:
-	- compatible: "parade,ps8622" or "parade,ps8625"
-	- reg: first i2c address of the bridge
-	- sleep-gpios: OF device-tree gpio specification for PD_ pin.
-	- reset-gpios: OF device-tree gpio specification for RST_ pin.
-
-Optional properties:
-	- lane-count: number of DP lanes to use
-	- use-external-pwm: backlight will be controlled by an external PWM
-	- video interfaces: Device node can contain video interface port
-			    nodes for panel according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	lvds-bridge@48 {
-		compatible = "parade,ps8622";
-		reg = <0x48>;
-		sleep-gpios = <&gpc3 6 1 0 0>;
-		reset-gpios = <&gpc3 1 1 0 0>;
-		lane-count = <1>;
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
index cdaf7a7a8f88..5856450c5da7 100644
--- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
@@ -4,11 +4,10 @@
 $id: http://devicetree.org/schemas/display/bridge/ps8640.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MIPI DSI to eDP Video Format Converter Device Tree Bindings
+title: MIPI DSI to eDP Video Format Converter
 
 maintainers:
   - Nicolas Boichat <drinkcat@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   The PS8640 is a low power MIPI-to-eDP video format converter supporting
@@ -74,7 +73,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -120,4 +119,3 @@ examples:
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt b/Documentation/devicetree/bindings/display/bridge/ptn3460.txt
deleted file mode 100644
index 361971ba104d..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-ptn3460 bridge bindings
-
-Required properties:
-	- compatible: "nxp,ptn3460"
-	- reg: i2c address of the bridge
-	- powerdown-gpio: OF device-tree gpio specification  for PD_N pin.
-	- reset-gpio: OF device-tree gpio specification for RST_N pin.
-	- edid-emulation: The EDID emulation entry to use
-		+-------+------------+------------------+
-		| Value | Resolution | Description      |
-		|   0   |  1024x768  | NXP Generic      |
-		|   1   |  1920x1080 | NXP Generic      |
-		|   2   |  1920x1080 | NXP Generic      |
-		|   3   |  1600x900  | Samsung LTM200KT |
-		|   4   |  1920x1080 | Samsung LTM230HT |
-		|   5   |  1366x768  | NXP Generic      |
-		|   6   |  1600x900  | ChiMei M215HGE   |
-		+-------+------------+------------------+
-
-	- video interfaces: Device node can contain video interface port
-			    nodes for panel according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpio = <&gpy2 5 1 0 0>;
-		reset-gpio = <&gpx1 5 1 0 0>;
-		edid-emulation = <5>;
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
new file mode 100644
index 000000000000..b95f10edd3a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car MIPI DSI/CSI-2 Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
+  R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up
+  to four data lanes.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a779a0-dsi-csi2-tx    # for V3U
+      - renesas,r8a779g0-dsi-csi2-tx    # for V4H
+      - renesas,r8a779h0-dsi-csi2-tx    # for V4M
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Functional clock
+      - description: DSI (and CSI-2) functional clock
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: dsi
+      - const: pll
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI/CSI-2 output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    dsi@fed80000 {
+        compatible = "renesas,r8a779a0-dsi-csi2-tx";
+        reg = <0xfed80000 0x10000>;
+        power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+        clocks = <&cpg CPG_MOD 415>,
+                 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+                 <&cpg CPG_CORE R8A779A0_CLK_CP>;
+        clock-names = "fck", "dsi", "pll";
+        resets = <&cpg 415>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&sn65dsi86_in>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/r8a779g0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779g0-sysc.h>
+
+    dsi@fed80000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "renesas,r8a779g0-dsi-csi2-tx";
+        reg = <0xfed80000 0x10000>;
+        clocks = <&cpg CPG_MOD 415>,
+                 <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>,
+                 <&cpg CPG_CORE R8A779G0_CLK_DSIREF>;
+        clock-names = "fck", "dsi", "pll";
+        power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
+        resets = <&cpg 415>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dsi0port1_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+
+        panel@0 {
+            reg = <0>;
+            compatible = "raspberrypi,dsi-7inch", "ilitek,ili9881c";
+            power-supply = <&vcc_lcd_reg>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0port1_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
new file mode 100644
index 000000000000..5a99d9b9635e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -0,0 +1,248 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L MIPI DSI Encoder
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This binding describes the MIPI DSI encoder embedded in the Renesas
+  RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with
+  up to four data lanes.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC}
+          - renesas,r9a07g054-mipi-dsi # RZ/V2L
+      - const: renesas,rzg2l-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Sequence operation channel 0 interrupt
+      - description: Sequence operation channel 1 interrupt
+      - description: Video-Input operation channel 1 interrupt
+      - description: DSI Packet Receive interrupt
+      - description: DSI Fatal Error interrupt
+      - description: DSI D-PHY PPI interrupt
+      - description: Debug interrupt
+
+  interrupt-names:
+    items:
+      - const: seq0
+      - const: seq1
+      - const: vin1
+      - const: rcv
+      - const: ferr
+      - const: ppi
+      - const: debug
+
+  clocks:
+    items:
+      - description: DSI D-PHY PLL multiplied clock
+      - description: DSI D-PHY system clock
+      - description: DSI AXI bus clock
+      - description: DSI Register access clock
+      - description: DSI Video clock
+      - description: DSI D-PHY Escape mode transmit clock
+
+  clock-names:
+    items:
+      - const: pllclk
+      - const: sysclk
+      - const: aclk
+      - const: pclk
+      - const: vclk
+      - const: lpclk
+
+  resets:
+    items:
+      - description: MIPI_DSI_CMN_RSTB
+      - description: MIPI_DSI_ARESET_N
+      - description: MIPI_DSI_PRESET_N
+
+  reset-names:
+    items:
+      - const: rst
+      - const: arst
+      - const: prst
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dsi0: dsi@10850000 {
+        compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+        reg = <0x10850000 0x20000>;
+        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "seq0", "seq1", "vin1", "rcv",
+                          "ferr", "ppi", "debug";
+        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+        reset-names = "rst", "arst", "prst";
+        power-domains = <&cpg>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&adv7535_in>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi1: dsi@10860000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+        reg = <0x10860000 0x20000>;
+        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "seq0", "seq1", "vin1", "rcv",
+                          "ferr", "ppi", "debug";
+        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+        reset-names = "rst", "arst", "prst";
+        power-domains = <&cpg>;
+
+        panel@0 {
+            compatible = "rocktech,jh057n00900";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi1_out>;
+                };
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi1_in: endpoint {
+                    remote-endpoint = <&du_out_dsi1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi1_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
index 0c9785c8db51..e3ec697f89e7 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
@@ -38,6 +38,9 @@ properties:
   clock-names:
     maxItems: 2
 
+  resets:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -67,6 +70,7 @@ required:
   - reg
   - clocks
   - clock-names
+  - resets
   - interrupts
   - ports
 
@@ -85,6 +89,7 @@ examples:
         clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
         clock-names = "iahb", "isfr";
         power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 729>;
 
         ports {
             #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
index acfc327f70a7..bb9dbfb9beaf 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
@@ -28,6 +28,7 @@ properties:
       - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders
       - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders
       - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders
+      - renesas,r8a77961-lvds # for R-Car M3-W+ compatible LVDS encoders
       - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders
       - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders
       - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders
@@ -94,7 +95,6 @@ then:
   properties:
     clocks:
       minItems: 1
-      maxItems: 4
       items:
         - description: Functional clock
         - description: EXTAL input clock
@@ -103,7 +103,6 @@ then:
 
     clock-names:
       minItems: 1
-      maxItems: 4
       items:
         - const: fck
         # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
@@ -127,12 +126,10 @@ then:
 else:
   properties:
     clocks:
-      maxItems: 1
       items:
         - description: Functional clock
 
     clock-names:
-      maxItems: 1
       items:
         - const: fck
 
diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
new file mode 100644
index 000000000000..ad279f0993fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -0,0 +1,309 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/samsung,mipi-dsim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung MIPI DSIM bridge controller
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Jagan Teki <jagan@amarulasolutions.com>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+description: |
+  Samsung MIPI DSIM bridge controller can be found it on Exynos
+  and i.MX8M Mini/Nano/Plus SoC's.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos3250-mipi-dsi
+          - samsung,exynos4210-mipi-dsi
+          - samsung,exynos5410-mipi-dsi
+          - samsung,exynos5422-mipi-dsi
+          - samsung,exynos5433-mipi-dsi
+          - samsung,exynos7870-mipi-dsi
+          - fsl,imx8mm-mipi-dsim
+          - fsl,imx8mp-mipi-dsim
+      - items:
+          - enum:
+              - fsl,imx7d-mipi-dsim
+              - fsl,imx8mn-mipi-dsim
+          - const: fsl,imx8mm-mipi-dsim
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+
+  samsung,phy-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: phandle to the samsung phy-type
+
+  power-domains:
+    maxItems: 1
+
+  samsung,power-domain:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the associated samsung power domain
+
+  vddcore-supply:
+    description: MIPI DSIM Core voltage supply (e.g. 1.1V)
+
+  vddio-supply:
+    description: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
+
+  samsung,burst-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM high speed burst mode frequency.  If absent,
+      the pixel clock from the attached device or bridge
+      will be used instead.
+
+  samsung,esc-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM escape mode frequency.
+
+  samsung,pll-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM oscillator clock frequency. If absent, the clock frequency
+      of sclk_mipi will be used instead.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dsim
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node to receive pixel data from the
+          display controller. Exactly one endpoint must be
+          specified.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          DSI output port node to the panel or the next bridge
+          in the chain.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                uniqueItems: true
+                items:
+                  enum: [ 1, 2, 3, 4 ]
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 5
+                description:
+                  The Samsung MIPI DSI IP requires that all the data lanes have
+                  the same polarity.
+
+            dependencies:
+              lane-polarities: [data-lanes]
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupts
+  - reg
+  - samsung,esc-clock-frequency
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7870-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+
+        clock-names:
+          items:
+            - const: bus
+            - const: pll
+            - const: byte
+            - const: esc
+
+        ports:
+          required:
+            - port@0
+
+      required:
+        - ports
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 5
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: phyclk_mipidphy0_bitclkdiv8
+            - const: phyclk_mipidphy0_rxclkesc0
+            - const: sclk_rgb_vclk_to_dsim0
+            - const: sclk_mipi
+
+        ports:
+          required:
+            - port@0
+
+      required:
+        - ports
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5410-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: pll_clk
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: sclk_mipi
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos3250-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: pll_clk
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+        - samsung,phy-type
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dsi@13900000 {
+        compatible = "samsung,exynos5433-mipi-dsi";
+        reg = <0x13900000 0xC0>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+        phys = <&mipi_phy 1>;
+        phy-names = "dsim";
+        clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+                 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+                 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+                 <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+                 <&cmu_disp CLK_SCLK_DSIM0>;
+        clock-names = "bus_clk",
+                      "phyclk_mipidphy0_bitclkdiv8",
+                      "phyclk_mipidphy0_rxclkesc0",
+                      "sclk_rgb_vclk_to_dsim0",
+                      "sclk_mipi";
+        power-domains = <&pd_disp>;
+        vddcore-supply = <&ldo6_reg>;
+        vddio-supply = <&ldo7_reg>;
+        samsung,burst-clock-frequency = <512000000>;
+        samsung,esc-clock-frequency = <16000000>;
+        samsung,pll-clock-frequency = <24000000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&te_irq>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dsi_to_mic: endpoint {
+                    remote-endpoint = <&mic_to_dsi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
deleted file mode 100644
index 3bc760cc31cb..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-sii902x HDMI bridge bindings
-
-Required properties:
-	- compatible: "sil,sii9022"
-	- reg: i2c address of the bridge
-
-Optional properties:
-	- interrupts: describe the interrupt line used to inform the host
-	  about hotplug events.
-	- reset-gpios: OF device-tree gpio specification for RST_N pin.
-	- iovcc-supply: I/O Supply Voltage (1.8V or 3.3V)
-	- cvcc12-supply: Digital Core Supply Voltage (1.2V)
-
-	HDMI audio properties:
-	- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin
-	   is wired, <1> if the both are wired. HDMI audio is
-	   configured only if this property is found.
-	- sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3
-	   Each integer indicates which i2s pin is connected to which
-	   audio fifo. The first integer selects i2s audio pin for the
-	   first audio fifo#0 (HDMI channels 1&2), second for fifo#1
-	   (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s
-	   pins (SD0 - SD3). Any i2s pin can be connected to any fifo,
-	   but there can be no gaps. E.g. an i2s pin must be mapped to
-	   fifo#0 and fifo#1 before mapping a channel to fifo#2. Default
-	   value is <0>, describing SD0 pin beiging routed to hdmi audio
-	   fifo #0.
-	- clocks: phandle and clock specifier for each clock listed in
-           the clock-names property
-	- clock-names: "mclk"
-	   Describes SII902x MCLK input. MCLK can be used to produce
-	   HDMI audio CTS values. This property follows
-	   Documentation/devicetree/bindings/clock/clock-bindings.txt
-	   consumer binding.
-
-	If HDMI audio is configured the sii902x device becomes an I2S
-	and/or spdif audio codec component (e.g a digital audio sink),
-	that can be used in configuring a full audio devices with
-	simple-card or audio-graph-card binding. See their binding
-	documents on how to describe the way the sii902x device is
-	connected to the rest of the audio system:
-	Documentation/devicetree/bindings/sound/simple-card.yaml
-	Documentation/devicetree/bindings/sound/audio-graph-card.yaml
-	Note: In case of the audio-graph-card binding the used port
-	index should be 3.
-
-Optional subnodes:
-	- video input: this subnode can contain a video input port node
-	  to connect the bridge to a display controller output (See this
-	  documentation [1]).
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	hdmi-bridge@39 {
-		compatible = "sil,sii9022";
-		reg = <0x39>;
-		reset-gpios = <&pioA 1 0>;
-		iovcc-supply = <&v3v3_hdmi>;
-		cvcc12-supply = <&v1v2_hdmi>;
-
-		#sound-dai-cells = <0>;
-		sil,i2s-data-lanes = < 0 1 2 >;
-		clocks = <&mclk>;
-		clock-names = "mclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				bridge_in: endpoint {
-					remote-endpoint = <&dc_out>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
deleted file mode 100644
index a55bf77bd960..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/sii9234.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Silicon Image SiI9234 HDMI/MHL bridge bindings
-
-Required properties:
-	- compatible : "sil,sii9234".
-	- reg : I2C address for TPI interface, use 0x39
-	- avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
-	- iovcc18-supply : I/O Supply Voltage (1.8V)
-	- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
-	- cvcc12-supply : Digital Core Supply Voltage (1.2V)
-	- interrupts: interrupt specifier of INT pin
-	- reset-gpios: gpio specifier of RESET pin (active low)
-	- video interfaces: Device node can contain two video interface port
-			    nodes for HDMI encoder and connector according to [1].
-			    - port@0 - MHL to HDMI
-			    - port@1 - MHL to connector
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-
-Example:
-	sii9234@39 {
-		compatible = "sil,sii9234";
-		reg = <0x39>;
-		avcc33-supply = <&vcc33mhl>;
-		iovcc18-supply = <&vcc18mhl>;
-		avcc12-supply = <&vsil12>;
-		cvcc12-supply = <&vsil12>;
-		reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpf3>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				mhl_to_hdmi: endpoint {
-					remote-endpoint = <&hdmi_to_mhl>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				mhl_to_connector: endpoint {
-					remote-endpoint = <&connector_to_mhl>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml
new file mode 100644
index 000000000000..a5fe46de3535
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii8620.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI8620 HDMI/MHL bridge
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: sil,sii8620
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xtal
+
+  cvcc10-supply:
+    description: Digital Core Supply Voltage (1.0V)
+
+  interrupts:
+    maxItems: 1
+
+  iovcc18-supply:
+    description: I/O Supply Voltage (1.8V)
+
+  reset-gpios:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    unevaluatedProperties: false
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for HDMI (encoder) input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          MHL to connector port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - cvcc10-supply
+  - interrupts
+  - iovcc18-supply
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@39 {
+            reg = <0x39>;
+            compatible = "sil,sii8620";
+            cvcc10-supply = <&ldo36_reg>;
+            iovcc18-supply = <&ldo34_reg>;
+            interrupt-parent = <&gpf0>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+            reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
+            clocks = <&pmu_system_controller 0>;
+            clock-names = "xtal";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mhl_to_hdmi: endpoint {
+                        remote-endpoint = <&hdmi_to_mhl>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mhl_to_musb_con: endpoint {
+                        remote-endpoint = <&musb_con_to_mhl>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
new file mode 100644
index 000000000000..17ea06719b56
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image sii902x HDMI bridge
+
+maintainers:
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sil,sii9022-cpi # CEC Programming Interface
+              - sil,sii9022-tpi # Transmitter Programming Interface
+          - const: sil,sii9022
+      - const: sil,sii9022
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt line used to inform the host about hotplug events.
+
+  reset-gpios:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O Supply Voltage (1.8V or 3.3V)
+
+  cvcc12-supply:
+    description: Digital Core Supply Voltage (1.2V)
+
+  '#sound-dai-cells':
+    enum: [ 0, 1 ]
+    description: |
+      <0> if only I2S or S/PDIF pin is wired,
+      <1> if both are wired.
+      HDMI audio is configured only if this property is found.
+      If HDMI audio is configured, the sii902x device becomes an I2S and/or
+      S/PDIF audio codec component (e.g. a digital audio sink), that can be
+      used in configuring full audio devices with simple-card or
+      audio-graph-card bindings. See their binding documents on how to describe
+      the way the
+      sii902x device is connected to the rest of the audio system:
+      Documentation/devicetree/bindings/sound/simple-card.yaml
+      Documentation/devicetree/bindings/sound/audio-graph-card.yaml
+      Note: In case of the audio-graph-card binding the used port index should
+      be 3.
+
+  sil,i2s-data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    uniqueItems: true
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    description:
+      Each integer indicates which I2S pin is connected to which audio FIFO.
+      The first integer selects the I2S audio pin for the first audio FIFO#0
+      (HDMI channels 1&2), the second for FIFO#1 (HDMI channels 3&4), and so
+      on. There are 4 FIFOs and 4 I2S pins (SD0 - SD3). Any I2S pin can be
+      connected to any FIFO, but there can be no gaps. E.g. an I2S pin must be
+      mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2. The
+      default value is <0>, describing SD0 pin being routed to HDMI audio
+      FIFO#0.
+
+  clocks:
+    maxItems: 1
+    description: MCLK input. MCLK can be used to produce HDMI audio CTS values.
+
+  clock-names:
+    const: mclk
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        unevaluatedProperties: false
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Parallel RGB input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              bus-width:
+                description:
+                  Endpoint bus width.
+                enum: [ 16, 18, 24 ]
+                default: 24
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Sound input port
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi-bridge@39 {
+            compatible = "sil,sii9022";
+            reg = <0x39>;
+            reset-gpios = <&pioA 1 0>;
+            iovcc-supply = <&v3v3_hdmi>;
+            cvcc12-supply = <&v1v2_hdmi>;
+
+            #sound-dai-cells = <0>;
+            sil,i2s-data-lanes = < 0 1 2 >;
+            clocks = <&mclk>;
+            clock-names = "mclk";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    bridge_in: endpoint {
+                        remote-endpoint = <&dc_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
new file mode 100644
index 000000000000..176181d25530
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI9234 HDMI/MHL bridge
+
+maintainers:
+  - Maciej Purski <m.purski@samsung.com>
+
+properties:
+  compatible:
+    const: sil,sii9234
+
+  reg:
+    description: I2C address for TPI interface
+    maxItems: 1
+
+  avcc12-supply:
+    description: TMDS Analog Supply Voltage, 1.2V
+
+  avcc33-supply:
+    description: MHL/USB Switch Supply Voltage, 3.3V
+
+  cvcc12-supply:
+    description: Digital Core Supply Voltage, 1.2V
+
+  iovcc18-supply:
+    description: I/O voltage supply, 1.8V
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the reset pin.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for HDMI (encoder) input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          MHL to connector port
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - avcc12-supply
+  - avcc33-supply
+  - cvcc12-supply
+  - iovcc18-supply
+  - interrupts
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@39 {
+        compatible = "sil,sii9234";
+        reg = <0x39>;
+        avcc12-supply = <&vsil12>;
+        avcc33-supply = <&vcc33mhl>;
+        cvcc12-supply = <&vsil12>;
+        iovcc18-supply = <&vcc18mhl>;
+        interrupt-parent = <&gpf3>;
+        interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            mhl_to_hdmi: endpoint {
+              remote-endpoint = <&hdmi_to_mhl>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            mhl_to_connector: endpoint {
+              remote-endpoint = <&connector_to_mhl>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
deleted file mode 100644
index b05052f7d62f..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Silicon Image SiI8620 HDMI/MHL bridge bindings
-
-Required properties:
-	- compatible: "sil,sii8620"
-	- reg: i2c address of the bridge
-	- cvcc10-supply: Digital Core Supply Voltage (1.0V)
-	- iovcc18-supply: I/O Supply Voltage (1.8V)
-	- interrupts: interrupt specifier of INT pin
-	- reset-gpios: gpio specifier of RESET pin
-	- clocks, clock-names: specification and name of "xtal" clock
-	- video interfaces: Device node can contain video interface port
-			    node for HDMI encoder according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	sii8620@39 {
-		reg = <0x39>;
-		compatible = "sil,sii8620";
-		cvcc10-supply = <&ldo36_reg>;
-		iovcc18-supply = <&ldo34_reg>;
-		interrupt-parent = <&gpf0>;
-		interrupts = <2 0>;
-		reset-gpio = <&gpv7 0 0>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "xtal";
-
-		port {
-			mhl_to_hdmi: endpoint {
-				remote-endpoint = <&hdmi_to_mhl>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
index 43cf4df9811a..20c7e0a77802 100644
--- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
@@ -27,7 +27,11 @@ properties:
           - const: adi,adv7123
       - enum:
           - adi,adv7123
+          - asl-tek,cs5263
           - dumb-vga-dac
+          - parade,ps185hdm
+          - radxa,ra620
+          - realtek,rtd2171
           - ti,opa362
           - ti,ths8134
           - ti,ths8135
diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
index 11fd68a70dca..8747b95ec20d 100644
--- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: |
   This document defines device tree properties for the Synopsys DesignWare MIPI
-  DSI host controller. It doesn't constitue a device tree binding specification
+  DSI host controller. It doesn't constitute a device tree binding specification
   by itself but is meant to be referenced by platform-specific device tree
   bindings.
 
@@ -26,19 +26,9 @@ properties:
   reg:
     maxItems: 1
 
-  clocks:
-    items:
-      - description: Module clock
-      - description: DSI bus clock for either AHB and APB
-      - description: Pixel clock for the DPI/RGB input
-    minItems: 2
-
-  clock-names:
-    items:
-      - const: ref
-      - const: pclk
-      - const: px_clk
-    minItems: 2
+  clocks: true
+
+  clock-names: true
 
   resets:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/bridge/solomon,ssd2825.yaml b/Documentation/devicetree/bindings/display/bridge/solomon,ssd2825.yaml
new file mode 100644
index 000000000000..e2d293d623b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/solomon,ssd2825.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/solomon,ssd2825.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD2825 RGB to MIPI-DSI bridge
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: solomon,ssd2825
+
+  reg:
+    maxItems: 1
+
+  reset-gpios: true
+
+  dvdd-supply:
+    description: Regulator for 1.2V digital power supply.
+
+  avdd-supply:
+    description: Regulator for 1.2V analog power supply.
+
+  vddio-supply:
+    description: Regulator for 1.8V IO power supply.
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpha: true
+  spi-cpol: true
+
+  clocks:
+    maxItems: 1
+    description: Reference TX_CLK used before PLL is locked.
+
+  solomon,hs-zero-delay-ns:
+    description:
+      HS zero delay period
+    minimum: 0
+    maximum: 1700
+    default: 133
+
+  solomon,hs-prep-delay-ns:
+    description:
+      HS prep delay period
+    minimum: 0
+    maximum: 1728
+    default: 40
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Video port for RGB input
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              bus-width:
+                enum: [ 16, 18, 24 ]
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for DSI output (panel or connector)
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dsi@2 {
+            compatible = "solomon,ssd2825";
+            reg = <2>;
+
+            spi-max-frequency = <1000000>;
+
+            spi-cpha;
+            spi-cpol;
+
+            reset-gpios = <&gpio 114 GPIO_ACTIVE_LOW>;
+
+            dvdd-supply = <&vdd_1v2>;
+            avdd-supply = <&vdd_1v2>;
+            vddio-supply = <&vdd_1v8_io>;
+
+            solomon,hs-zero-delay-ns = <300>;
+            solomon,hs-prep-delay-ns = <65>;
+
+            clocks = <&ssd2825_tx_clk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    bridge_input: endpoint {
+                        remote-endpoint = <&dpi_output>;
+                        bus-width = <24>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_output: endpoint {
+                        remote-endpoint = <&panel_input>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
index 9be44a682e67..33481381cccc 100644
--- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
@@ -26,9 +26,7 @@ properties:
   reg-io-width:
     description:
       Width (in bytes) of the registers specified by the reg property.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 4]
+    enum: [1, 4]
     default: 1
 
   clocks:
@@ -47,6 +45,19 @@ properties:
       - const: isfr
     additionalItems: true
 
+  ddc-i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    deprecated: true
+    description:
+      The HDMI DDC bus can be connected to either a system I2C master or the
+      functionally-reduced I2C master contained in the DWC HDMI. When connected
+      to a system I2C master this property contains a phandle to that I2C
+      master controller.
+
+      This property is deprecated, the system I2C master controller should
+      be referenced through the ddc-i2c-bus property of the HDMI connector
+      node.
+
   interrupts:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
deleted file mode 100644
index f5a02f61dd36..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Device-Tree bindings for the NXP TDA998x HDMI transmitter
-
-Required properties;
-  - compatible: must be "nxp,tda998x"
-
-  - reg: I2C address
-
-Required node:
-  - port: Input port node with endpoint definition, as described
-        in Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - interrupts: interrupt number and trigger type
-	default: polling
-
-  - pinctrl-0: pin control group to be used for
-	screen plug/unplug interrupt.
-
-  - pinctrl-names: must contain a "default" entry.
-
-  - video-ports: 24 bits value which defines how the video controller
-	output is wired to the TDA998x input - default: <0x230145>
-
-  - audio-ports: array of 8-bit values, 2 values per one DAI[1].
-	The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2].
-	The second value defines the tda998x AP_ENA reg content when the DAI
-	in question is used. The implementation allows one or two DAIs. If two
-	DAIs are defined, they must be of different type.
-
-  - nxp,calib-gpios: calibration GPIO, which must correspond with the
-	gpio used for the TDA998x interrupt pin.
-
-[1] Documentation/sound/soc/dai.rst
-[2] include/dt-bindings/display/tda998x.h
-
-Example:
-
-#include <dt-bindings/display/tda998x.h>
-
-	tda998x: hdmi-encoder {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 2>;		/* falling edge */
-		pinctrl-0 = <&pmx_camera>;
-		pinctrl-names = "default";
-		video-ports = <0x230145>;
-
-		#sound-dai-cells = <2>;
-			     /*	DAI-format	AP_ENA reg value */
-		audio-ports = <	TDA998x_SPDIF	0x04
-				TDA998x_I2S	0x03>;
-
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
new file mode 100644
index 000000000000..d3f84d220723
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DLPC3433 MIPI DSI to DMD bridge
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+  - Christopher Vollo <chris@renewoutreach.org>
+
+description: |
+  TI DLPC3433 is a MIPI DSI based display controller bridge
+  for processing high resolution DMD based projectors.
+
+  It has a flexible configuration of MIPI DSI and DPI signal
+  input that produces a DMD output in RGB565, RGB666, RGB888
+  formats.
+
+  It supports upto 720p resolution with 60 and 120 Hz refresh
+  rates.
+
+properties:
+  compatible:
+    const: ti,dlpc3433
+
+  reg:
+    enum:
+      - 0x1b
+      - 0x1d
+
+  enable-gpios:
+    description: PROJ_ON pin, chip powers up PROJ_ON is high.
+
+  vcc_intf-supply:
+    description: A 1.8V/3.3V supply that power the Host I/O.
+
+  vcc_flsh-supply:
+    description: A 1.8V/3.3V supply that power the Flash I/O.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for MIPI DSI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DMD output.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@1b {
+            compatible = "ti,dlpc3433";
+            reg = <0x1b>;
+            enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    bridge_in_dsi: endpoint {
+                        remote-endpoint = <&dsi_out_bridge>;
+                        data-lanes = <1 2 3 4>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_out_panel: endpoint {
+                        remote-endpoint = <&panel_out_bridge>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index b446d0f0f1b4..e69b6343a8eb 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -32,6 +32,12 @@ properties:
     maxItems: 1
     description: GPIO specifier for bridge_en pin (active high).
 
+  vcc-supply:
+    description: A 1.8V power supply (see regulator/regulator.yaml).
+
+  interrupts:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -77,12 +83,12 @@ properties:
                   - const: 4
 
       port@2:
-        $ref: /schemas/graph.yaml#/properties/port
         description: Video port for LVDS Channel-A output (panel or bridge).
+        $ref: '#/$defs/lvds-port'
 
       port@3:
-        $ref: /schemas/graph.yaml#/properties/port
         description: Video port for LVDS Channel-B output (panel or bridge).
+        $ref: '#/$defs/lvds-port'
 
     required:
       - port@0
@@ -91,9 +97,34 @@ properties:
 required:
   - compatible
   - reg
-  - enable-gpios
   - ports
 
+$defs:
+  lvds-port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          ti,lvds-termination-ohms:
+            description: The value of near end differential termination in ohms.
+            enum: [100, 200]
+            default: 200
+
+          ti,lvds-vod-swing-clock-microvolt:
+            description: LVDS diferential output voltage <min max> for clock
+              lanes in microvolts.
+            maxItems: 2
+
+          ti,lvds-vod-swing-data-microvolt:
+            description: LVDS diferential output voltage <min max> for data
+              lanes in microvolts.
+            maxItems: 2
+
 allOf:
   - if:
       properties:
@@ -133,6 +164,7 @@ examples:
             reg = <0x2d>;
 
             enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+            vcc-supply = <&reg_sn65dsi83_1v8>;
 
             ports {
                 #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
index 911564468c5e..c93878b6d718 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SN65DSI86 DSI to eDP bridge chip
 
 maintainers:
-  - Sandeep Panda <spanda@codeaurora.org>
+  - Douglas Anderson <dianders@chromium.org>
 
 description: |
   The Texas Instruments SN65DSI86 bridge takes MIPI DSI in and outputs eDP.
@@ -90,7 +90,7 @@ properties:
 
         properties:
           endpoint:
-            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            $ref: /schemas/media/video-interfaces.yaml#
             unevaluatedProperties: false
 
             properties:
@@ -106,7 +106,6 @@ properties:
                     description:
                       If you have 1 logical lane the bridge supports routing
                       to either port 0 or port 1.  Port 0 is suggested.
-                      See ../../media/video-interface.txt for details.
 
                   - minItems: 2
                     maxItems: 2
@@ -118,7 +117,6 @@ properties:
                     description:
                       If you have 2 logical lanes the bridge supports
                       reordering but only on physical ports 0 and 1.
-                      See ../../media/video-interface.txt for details.
 
                   - minItems: 4
                     maxItems: 4
@@ -132,7 +130,6 @@ properties:
                     description:
                       If you have 4 logical lanes the bridge supports
                       reordering in any way.
-                      See ../../media/video-interface.txt for details.
 
               lane-polarities:
                 minItems: 1
@@ -141,7 +138,6 @@ properties:
                   enum:
                     - 0
                     - 1
-                description: See ../../media/video-interface.txt
 
             dependencies:
               lane-polarities: [data-lanes]
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tdp158.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tdp158.yaml
new file mode 100644
index 000000000000..721da44054e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tdp158.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,tdp158.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TDP158 HDMI to TMDS Redriver
+
+maintainers:
+  - Arnaud Vrac <avrac@freebox.fr>
+  - Pierre-Hugues Husson <phhusson@freebox.fr>
+
+properties:
+  compatible:
+    const: ti,tdp158
+
+# The reg property is required if and only if the device is connected
+# to an I2C bus. In pin strap mode, reg must not be specified.
+  reg:
+    maxItems: 1
+    description: I2C address of the device
+
+# Pin 36 = Operation Enable / Reset Pin
+# OE = L: Power Down Mode
+# OE = H: Normal Operation
+# Internal weak pullup - device resets on H to L transitions
+  enable-gpios:
+    description: GPIO controlling bridge enable
+
+  vcc-supply:
+    description: Power supply 3.3V
+
+  vdd-supply:
+    description: Power supply 1.1V
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Bridge input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Bridge output
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - vcc-supply
+  - vdd-supply
+  - ports
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
index 5216c27fc0ad..6c1de0b21722 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -21,6 +21,9 @@ properties:
     maxItems: 1
     description: virtual channel number of a DSI peripheral
 
+  reset-gpios:
+    maxItems: 1
+
   vddc-supply:
     description: Regulator for 1.2V internal core power.
 
@@ -39,7 +42,6 @@ properties:
           Video port for MIPI DPI output (panel or connector).
 
     required:
-      - port@0
       - port@1
 
 required:
@@ -52,7 +54,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c1 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
deleted file mode 100644
index 8f9abf28a8fa..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-TC358764 MIPI-DSI to LVDS panel bridge
-
-Required properties:
-  - compatible: "toshiba,tc358764"
-  - reg: the virtual channel number of a DSI peripheral
-  - vddc-supply: core voltage supply, 1.2V
-  - vddio-supply: I/O voltage supply, 1.8V or 3.3V
-  - vddlvds-supply: LVDS1/2 voltage supply, 3.3V
-  - reset-gpios: a GPIO spec for the reset pin
-
-The device node can contain following 'port' child nodes,
-according to the OF graph bindings defined in [1]:
-  0: DSI Input, not required, if the bridge is DSI controlled
-  1: LVDS Output, mandatory
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	bridge@0 {
-		reg = <0>;
-		compatible = "toshiba,tc358764";
-		vddc-supply = <&vcc_1v2_reg>;
-		vddio-supply = <&vcc_1v8_reg>;
-		vddlvds-supply = <&vcc_3v3_reg>;
-		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@1 {
-			reg = <1>;
-			lvds_ep: endpoint {
-				remote-endpoint = <&panel_ep>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
new file mode 100644
index 000000000000..866607400514
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358764.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358764 MIPI-DSI to LVDS bridge
+
+maintainers:
+  - Andrzej Hajda <andrzej.hajda@intel.com>
+
+properties:
+  compatible:
+    const: toshiba,tc358764
+
+  reg:
+    description: Virtual channel number of a DSI peripheral
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vddc-supply:
+    description: Core voltage supply, 1.2V
+
+  vddio-supply:
+    description: I/O voltage supply, 1.8V or 3.3V
+
+  vddlvds-supply:
+    description: LVDS1/2 voltage supply, 3.3V
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input, if the bridge DSI controlled
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for LVDS output (panel or connector).
+
+    required:
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vddc-supply
+  - vddio-supply
+  - vddlvds-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@0 {
+            compatible = "toshiba,tc358764";
+            reg = <0>;
+
+            reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+            vddc-supply = <&vcc_1v2_reg>;
+            vddio-supply = <&vcc_1v8_reg>;
+            vddlvds-supply = <&vcc_3v3_reg>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+                    lvds_ep: endpoint {
+                      remote-endpoint = <&panel_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index f1541cc05297..70f229dc4e0c 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -4,26 +4,34 @@
 $id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Toshiba TC358767 eDP bridge bindings
+title: Toshiba TC358767/TC358867/TC9595 DSI/DPI/eDP bridge
 
 maintainers:
   - Andrey Gusakov <andrey.gusakov@cogentembedded.com>
 
-description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP
+description: |
+  The TC358767/TC358867/TC9595 is bridge device which
+  converts DSI/DPI to eDP/DP .
 
 properties:
   compatible:
-    const: toshiba,tc358767
+    oneOf:
+      - items:
+          - enum:
+              - toshiba,tc358867
+              - toshiba,tc9595
+          - const: toshiba,tc358767
+      - const: toshiba,tc358767
 
   reg:
     enum:
-      - 0x68
       - 0x0f
+      - 0x68
     description: |
         i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
 
   clock-names:
-    const: "ref"
+    const: ref
 
   clocks:
     maxItems: 1
@@ -41,6 +49,9 @@ properties:
     description: |
         OF device-tree gpio specification for RSTX pin(active low system reset)
 
+  interrupts:
+    maxItems: 1
+
   toshiba,hpd-pin:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum:
@@ -53,31 +64,65 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
             DSI input port. The remote endpoint phandle should be a
             reference to a valid DSI output endpoint node
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: |
-            DPI input port. The remote endpoint phandle should be a
-            reference to a valid DPI output endpoint node
+            DPI input/output port. The remote endpoint phandle should be a
+            reference to a valid DPI output or input endpoint node.
 
       port@2:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
             eDP/DP output port. The remote endpoint phandle should be a
             reference to a valid eDP panel input endpoint node. This port is
             optional, treated as DP panel if not defined
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              toshiba,pre-emphasis:
+                description:
+                  Display port output Pre-Emphasis settings for both DP lanes.
+                $ref: /schemas/types.yaml#/definitions/uint8-array
+                minItems: 2
+                maxItems: 2
+                items:
+                  enum:
+                    - 0 # No pre-emphasis
+                    - 1 # 3.5dB pre-emphasis
+                    - 2 # 6dB pre-emphasis
+
     oneOf:
       - required:
           - port@0
       - required:
           - port@1
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
index eacfe7165083..bb5d3b543800 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
@@ -58,6 +58,11 @@ properties:
 
             properties:
               data-lines:
+                $ref: /schemas/types.yaml#/definitions/uint32
+                enum: [ 16, 18, 24 ]
+                deprecated: true
+
+              bus-width:
                 enum: [ 16, 18, 24 ]
 
       port@1:
@@ -77,17 +82,20 @@ required:
   - vddio-supply
   - ports
 
-additionalProperties: false
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c1 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
-      dsi_bridge: dsi-bridge@e {
+      dsi_bridge: dsi@e {
         compatible = "toshiba,tc358768";
         reg = <0xe>;
 
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
index 10471c6c1ff9..258dd9cfd770 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Toshiba TC358775 DSI to LVDS bridge bindings
+title: Toshiba TC358775 DSI to LVDS bridge
 
 maintainers:
   - Vinay Simha BN <simhavcs@gmail.com>
 
 description: |
-  This binding supports DSI to LVDS bridge TC358775
+  This binding supports DSI to LVDS bridges TC358765 and TC358775
 
   MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800 Mbps/lane.
   Video frame size:
@@ -21,7 +21,9 @@ description: |
 
 properties:
   compatible:
-    const: toshiba,tc358775
+    enum:
+      - toshiba,tc358765
+      - toshiba,tc358775
 
   reg:
     maxItems: 1
@@ -46,11 +48,27 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
           DSI Input. The remote endpoint phandle should be a
           reference to a valid mipi_dsi_host device node.
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: |
@@ -70,10 +88,19 @@ required:
   - reg
   - vdd-supply
   - vddio-supply
-  - stby-gpios
   - reset-gpios
   - ports
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: toshiba,tc358765
+    then:
+      properties:
+        stby-gpios: false
+
 additionalProperties: false
 
 examples:
@@ -108,6 +135,7 @@ examples:
                     reg = <0>;
                     d2l_in_test: endpoint {
                         remote-endpoint = <&dsi0_out>;
+                        data-lanes = <1 2 3 4>;
                     };
                 };
 
@@ -132,7 +160,6 @@ examples:
                 reg = <1>;
                 dsi0_out: endpoint {
                     remote-endpoint = <&d2l_in_test>;
-                    data-lanes = <0 1 2 3>;
                 };
              };
          };
@@ -167,6 +194,7 @@ examples:
                     reg = <0>;
                     d2l_in_dual: endpoint {
                         remote-endpoint = <&dsi0_out_dual>;
+                        data-lanes = <1 2 3 4>;
                     };
                 };
 
@@ -198,7 +226,6 @@ examples:
                 reg = <1>;
                 dsi0_out_dual: endpoint {
                     remote-endpoint = <&d2l_in_dual>;
-                    data-lanes = <0 1 2 3>;
                 };
              };
          };
diff --git a/Documentation/devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml
new file mode 100644
index 000000000000..5e8498c8303d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/waveshare,dsi2dpi.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/waveshare,dsi2dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Waveshare MIPI-DSI to DPI Converter bridge
+
+maintainers:
+  - Joseph Guo <qijian.guo@nxp.com>
+
+description:
+  Waveshare bridge board is part of Waveshare panel which converts DSI to DPI.
+
+properties:
+  compatible:
+    const: waveshare,dsi2dpi
+
+  reg:
+    maxItems: 1
+    description: base I2C address of the device
+
+  power-supply: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Video port for MIPI DSI input
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                items:
+                  - const: 1
+                  - const: 2
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DPI output panel.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - ports
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@45 {
+        compatible = "waveshare,dsi2dpi";
+        reg = <0x45>;
+        power-supply = <&reg_3p3v>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            waveshare_from_dsim: endpoint {
+              data-lanes = <1 2>;
+              remote-endpoint = <&dsim_to_waveshare>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            waveshare_to_panel: endpoint {
+              remote-endpoint = <&panel_to_waveshare>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
index 0ab5f0663611..84c75f849891 100644
--- a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
+++ b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
@@ -1,4 +1,4 @@
-* Currus Logic CLPS711X Framebuffer
+* Cirrus Logic CLPS711X Framebuffer
 
 Required properties:
 - compatible: Shall contain "cirrus,ep7209-fb".
diff --git a/Documentation/devicetree/bindings/display/connector/dp-connector.yaml b/Documentation/devicetree/bindings/display/connector/dp-connector.yaml
index 22792a79e7ce..1f2b449dc910 100644
--- a/Documentation/devicetree/bindings/display/connector/dp-connector.yaml
+++ b/Documentation/devicetree/bindings/display/connector/dp-connector.yaml
@@ -31,10 +31,32 @@ properties:
     $ref: /schemas/graph.yaml#/properties/port
     description: Connection to controller providing DP signals
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: OF graph representation of signales routed to DP connector
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Connection to controller providing DP signals
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Connection to controller providing AUX signals
+
+    required:
+      - port@0
+      - port@1
+
 required:
   - compatible
   - type
-  - port
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
 
 additionalProperties: false
 
@@ -52,4 +74,32 @@ examples:
         };
     };
 
+  - |
+    /* DP connecttor being driven by the USB+DP combo PHY */
+    connector {
+        compatible = "dp-connector";
+        label = "dp0";
+        type = "full-size";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                endpoint {
+                    remote-endpoint = <&phy_ss_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                endpoint {
+                    remote-endpoint = <&phy_sbu_out>;
+                };
+            };
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
index 83c0d008265b..3ee8f9225984 100644
--- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
@@ -36,6 +36,9 @@ properties:
     description: GPIO signal to enable DDC bus
     maxItems: 1
 
+  hdmi-pwr-supply:
+    description: Power supply for the HDMI +5V Power pin
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: Connection to controller providing HDMI signals
diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
index 5e4afe9f98fb..0ece7b01790b 100644
--- a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
+++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
@@ -26,7 +26,7 @@ description:
 
 properties:
   $nodename:
-    const: "aux-bus"
+    const: aux-bus
 
   panel:
     $ref: panel/panel-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml
index ca21671f6bdd..bb4d6e9e7d0c 100644
--- a/Documentation/devicetree/bindings/display/dsi-controller.yaml
+++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml
@@ -30,6 +30,15 @@ properties:
   $nodename:
     pattern: "^dsi(@.*)?$"
 
+  clock-master:
+    type: boolean
+    description:
+      Should be enabled if the host is being used in conjunction with
+      another DSI host to drive the same peripheral. Hardware supporting
+      such a configuration generally requires the data on both the busses
+      to be driven by the same clock. Only the DSI host instance
+      controlling this clock should contain this property.
+
   "#address-cells":
     const: 1
 
@@ -37,7 +46,7 @@ properties:
     const: 0
 
 patternProperties:
-  "^panel@[0-3]$":
+  "^(panel|bridge)@[0-3]$":
     description: Panels connected to the DSI link
     type: object
 
@@ -52,15 +61,6 @@ patternProperties:
           case the reg property can take multiple entries, one for each virtual
           channel that the peripheral responds to.
 
-      clock-master:
-        type: boolean
-        description:
-          Should be enabled if the host is being used in conjunction with
-          another DSI host to drive the same peripheral. Hardware supporting
-          such a configuration generally requires the data on both the busses
-          to be driven by the same clock. Only the DSI host instance
-          controlling this clock should contain this property.
-
       enforce-video-mode:
         type: boolean
         description:
diff --git a/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml b/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml
new file mode 100644
index 000000000000..faca0cb3f154
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/elgin,jg10309-01.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/elgin,jg10309-01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elgin JG10309-01 SPI-controlled display
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+description: |
+  The Elgin JG10309-01 SPI-controlled display is used on the RV1108-Elgin-r1
+  board and is a custom display.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: elgin,jg10309-01
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 24000000
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - spi-cpol
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "elgin,jg10309-01";
+            reg = <0>;
+            spi-max-frequency = <24000000>;
+            spi-cpha;
+            spi-cpol;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt b/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt
deleted file mode 100644
index 0fba2ee6440a..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
-
-MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
-not capable to transfer high resoltuion frame data as decon can send. MIC
-solves this problem by compressing the frame data by 1/2 before it is
-transferred through mipi dsi. The compressed frame data must be uncompressed in
-the panel PCB.
-
-Required properties:
-- compatible: value should be "samsung,exynos5433-mic".
-- reg: physical base address and length of the MIC registers set and system
-       register of mic.
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
-- samsung,disp-syscon: the reference node for syscon for DISP block.
-- ports: contains a port which is connected to decon node and dsi node.
-	 address-cells and size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the
-	decon node or dsi node. The reg value must be 0 and 1 respectively.
-
-Example:
-SoC specific DT entry:
-mic: mic@13930000 {
-	compatible = "samsung,exynos5433-mic";
-	reg = <0x13930000 0x48>;
-	clocks = <&cmu_disp CLK_PCLK_MIC0>,
-	       <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
-	clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
-	samsung,disp-syscon = <&syscon_disp>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			mic_to_decon: endpoint {
-				remote-endpoint = <&decon_to_mic>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			mic_to_dsi: endpoint {
-				remote-endpoint = <&dsi_to_mic>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
deleted file mode 100644
index 775193e1c641..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
-
-DECON (Display and Enhancement Controller) is the Display Controller for the
-Exynos series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of:
-	"samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
-- reg: physical base address and length of the DECON registers set.
-- interrupt-names: should contain the interrupt names depending on mode of work:
-		video mode: "vsync",
-		command mode: "lcd_sys",
-		command mode with software trigger: "lcd_sys", "te".
-- interrupts or interrupts-extended: list of interrupt specifiers corresponding
-		to names privided in interrupt-names, as described in
-		interrupt-controller/interrupts.txt
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x",
-	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x",
-	       "aclk_xiu_decon1x", "pclk_smmu_decon1x", clk_decon_vclk",
-	       "sclk_decon_eclk"
-- ports: contains a port which is connected to mic node. address-cells and
-	 size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the mic
-	node. The reg value muset be 0.
-
-Example:
-SoC specific DT entry:
-decon: decon@13800000 {
-	compatible = "samsung,exynos5433-decon";
-	reg = <0x13800000 0x2104>;
-	clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_ACLK_XIU_DECON0X>,
-		<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_ACLK_SMMU_DECON1X>,
-		<&cmu_disp CLK_ACLK_XIU_DECON1X>,
-		<&cmu_disp CLK_PCLK_SMMU_DECON1X>,
-		<&cmu_disp CLK_SCLK_DECON_VCLK>,
-		<&cmu_disp CLK_SCLK_DECON_ECLK>;
-	clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
-		"pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x",
-		"pclk_smmu_decon1x", "sclk_decon_vclk", "sclk_decon_eclk";
-	interrupt-names = "vsync", "lcd_sys";
-	interrupts = <0 202 0>, <0 203 0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			decon_to_mic: endpoint {
-				remote-endpoint = <&mic_to_decon>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
deleted file mode 100644
index 53912c99ec38..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
-
-DECON (Display and Enhancement Controller) is the Display Controller for the
-Exynos7 series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be "samsung,exynos7-decon";
-
-- reg: physical base address and length of the DECON registers set.
-
-- interrupts: should contain a list of all DECON IP block interrupts in the
-		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- interrupt-names: should contain the interrupt names: "fifo", "vsync",
-	"lcd_sys", in the same order as they were listed in the interrupts
-        property.
-
-- pinctrl-0: pin control group to be used for this controller.
-
-- pinctrl-names: must contain a "default" entry.
-
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-
-- clock-names: list of clock names sorted in the same order as the clocks
-               property. Must contain "pclk_decon0", "aclk_decon0",
-	       "decon0_eclk", "decon0_vclk".
-- i80-if-timings: timing configuration for lcd i80 interface support.
-
-Optional Properties:
-- power-domains: a phandle to DECON power domain node.
-- display-timings: timing settings for DECON, as described in document [1].
-		Can be used in case timings cannot be provided otherwise
-		or to override timings provided by the panel.
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-
-Example:
-
-SoC specific DT entry:
-
-	decon@13930000 {
-		compatible = "samsung,exynos7-decon";
-		interrupt-parent = <&combiner>;
-		reg = <0x13930000 0x1000>;
-		interrupt-names = "lcd_sys", "vsync", "fifo";
-		interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
-		clocks = <&clock_disp PCLK_DECON_INT>,
-			 <&clock_disp ACLK_DECON_INT>,
-			 <&clock_disp SCLK_DECON_INT_ECLK>,
-			 <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
-		clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
-				"decon0_vclk";
-		status = "disabled";
-	};
-
-Board specific DT entry:
-
-	decon@13930000 {
-		pinctrl-0 = <&lcd_clk &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
deleted file mode 100644
index 9b6cba3f82af..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-The Exynos display port interface should be configured based on
-the type of panel connected to it.
-
-We use two nodes:
-	-dp-controller node
-	-dptx-phy node(defined inside dp-controller node)
-
-For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy: deprecated, use phys and phy-names
-	-reg: deprecated
-		Base address of DP PHY register.
-	-samsung,enable-mask: deprecated
-		The bit-mask used to enable/disable DP PHY.
-
-For the Panel initialization, we read data from dp-controller node.
-Required properties for dp-controller:
-	-compatible:
-		should be "samsung,exynos5-dp".
-	-reg:
-		physical base address of the controller and length
-		of memory mapped region.
-	-interrupts:
-		interrupt combiner values.
-	-clocks:
-		from common clock binding: handle to dp clock.
-	-clock-names:
-		from common clock binding: Shall be "dp".
-	-phys:
-		from general PHY binding: the phandle for the PHY device.
-	-phy-names:
-		from general PHY binding: Should be "dp".
-
-Optional properties for dp-controller:
-	-interlaced:
-		interlace scan mode.
-			Progressive if defined, Interlaced if not defined
-	-vsync-active-high:
-		VSYNC polarity configuration.
-			High if defined, Low if not defined
-	-hsync-active-high:
-		HSYNC polarity configuration.
-			High if defined, Low if not defined
-	-samsung,hpd-gpio:
-		Hotplug detect GPIO.
-			Indicates which GPIO should be used for hotplug
-			detection
-	-video interfaces: Device node can contain video interface port
-			nodes according to [1].
-	- display-timings: timings for the connected panel as described by
-		Documentation/devicetree/bindings/display/panel/display-timing.txt
-
-For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
-	-phys (required)
-	-phy-names (required)
-	-hpd-gpios (optional)
-	 force-hpd (optional)
-
-Deprecated properties for DisplayPort:
--interlaced:            deprecated prop that can parsed from drm_display_mode.
--vsync-active-high:     deprecated prop that can parsed from drm_display_mode.
--hsync-active-high:     deprecated prop that can parsed from drm_display_mode.
--samsung,ycbcr-coeff:   deprecated prop that can parsed from drm_display_mode.
--samsung,dynamic-range: deprecated prop that can parsed from drm_display_mode.
--samsung,color-space:   deprecated prop that can parsed from drm_display_info.
--samsung,color-depth:   deprecated prop that can parsed from drm_display_info.
--samsung,link-rate:     deprecated prop that can reading from monitor by dpcd method.
--samsung,lane-count:    deprecated prop that can reading from monitor by dpcd method.
--samsung,hpd-gpio:      deprecated name for hpd-gpios.
-
--------------------------------------------------------------------------------
-
-Example:
-
-SOC specific portion:
-	dp-controller {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145b0000 0x10000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
-		clocks = <&clock 342>;
-		clock-names = "dp";
-
-		phys = <&dp_phy>;
-		phy-names = "dp";
-	};
-
-Board Specific portion:
-	dp-controller {
-		display-timings {
-			native-mode = <&lcd_timing>;
-			lcd_timing: 1366x768 {
-				clock-frequency = <70589280>;
-				hactive = <1366>;
-				vactive = <768>;
-				hfront-porch = <40>;
-				hback-porch = <40>;
-				hsync-len = <32>;
-				vback-porch = <10>;
-				vfront-porch = <12>;
-				vsync-len = <6>;
-			};
-		};
-
-		ports {
-			port@0 {
-				dp_out: endpoint {
-					remote-endpoint = <&bridge_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
deleted file mode 100644
index be377786e8cd..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-Exynos MIPI DSI Master
-
-Required properties:
-  - compatible: value should be one of the following
-		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
-		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
-		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
-		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
-		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
-  - reg: physical base address and length of the registers set for the device
-  - interrupts: should contain DSI interrupt
-  - clocks: list of clock specifiers, must contain an entry for each required
-    entry in clock-names
-  - clock-names: should include "bus_clk"and "sclk_mipi" entries
-		 the use of "pll_clk" is deprecated
-  - phys: list of phy specifiers, must contain an entry for each required
-    entry in phy-names
-  - phy-names: should include "dsim" entry
-  - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
-  - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
-  - samsung,pll-clock-frequency: specifies frequency of the oscillator clock
-  - #address-cells, #size-cells: should be set respectively to <1> and <0>
-    according to DSI host bindings (see MIPI DSI bindings [1])
-  - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
-    mode
-  - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
-
-Optional properties:
-  - power-domains: a phandle to DSIM power domain node
-
-Child nodes:
-  Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
-
-Video interfaces:
-  Device node can contain following video interface port nodes according to [2]:
-  0: RGB input,
-  1: DSI output
-
-[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	dsi@11c80000 {
-		compatible = "samsung,exynos4210-mipi-dsi";
-		reg = <0x11C80000 0x10000>;
-		interrupts = <0 79 0>;
-		clocks = <&clock 286>, <&clock 143>;
-		clock-names = "bus_clk", "sclk_mipi";
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		vddcore-supply = <&vusb_reg>;
-		vddio-supply = <&vmipi_reg>;
-		power-domains = <&pd_lcd0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,pll-clock-frequency = <24000000>;
-
-		panel@1 {
-			reg = <0>;
-			...
-			port {
-				panel_ep: endpoint {
-					remote-endpoint = <&dsi_ep>;
-				};
-			};
-		};
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				decon_to_mic: endpoint {
-					remote-endpoint = <&mic_to_decon>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				dsi_ep: endpoint {
-					reg = <0>;
-					samsung,burst-clock-frequency = <500000000>;
-					samsung,esc-clock-frequency = <20000000>;
-					remote-endpoint = <&panel_ep>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
deleted file mode 100644
index 58b12e25bbb1..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Device-Tree bindings for drm hdmi driver
-
-Required properties:
-- compatible: value should be one among the following:
-	1) "samsung,exynos4210-hdmi"
-	2) "samsung,exynos4212-hdmi"
-	3) "samsung,exynos5420-hdmi"
-	4) "samsung,exynos5433-hdmi"
-- reg: physical base address of the hdmi and length of memory mapped
-	region.
-- interrupts: interrupt number to the cpu.
-- hpd-gpios: following information about the hotplug gpio pin.
-	a) phandle of the gpio controller node.
-	b) pin number within the gpio controller.
-	c) optional flags and pull up/down.
-- ddc: phandle to the hdmi ddc node
-- phy: phandle to the hdmi phy node
-- samsung,syscon-phandle: phandle for system controller node for PMU.
-- #sound-dai-cells: should be 0.
-
-Required properties for Exynos 4210, 4212, 5420 and 5433:
-- clocks: list of clock IDs from SoC clock driver.
-	a) hdmi: Gate of HDMI IP bus clock.
-	b) sclk_hdmi: Gate of HDMI special clock.
-	c) sclk_pixel: Pixel special clock, one of the two possible inputs of
-		HDMI clock mux.
-	d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
-		HDMI clock mux.
-	e) mout_hdmi: It is required by the driver to switch between the 2
-		parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
-		after configuration, parent is set to sclk_hdmiphy else
-		sclk_pixel.
-- clock-names: aliases as per driver requirements for above clock IDs:
-	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
-
-Required properties for Exynos 5433:
-- clocks: list of clock specifiers according to common clock bindings.
-	a) hdmi_pclk: Gate of HDMI IP APB bus.
-	b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus.
-	d) i_tmds_clk: Gate of HDMI TMDS clock.
-	e) i_pixel_clk: Gate of HDMI pixel clock.
-	f) i_spdif_clk: Gate of HDMI SPDIF clock.
-	g) oscclk: Oscillator clock, used as parent of following *_user clocks
-		in case HDMI-PHY is not operational.
-	h) tmds_clko: TMDS clock generated by HDMI-PHY.
-	i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko,
-		respectively if HDMI-PHY is off and operational.
-	j) pixel_clko: Pixel clock generated by HDMI-PHY.
-	k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko,
-		respectively if HDMI-PHY is off and operational.
-- clock-names: aliases for above clock specfiers.
-- samsung,sysreg: handle to syscon used to control the system registers.
-
-Example:
-
-	hdmi {
-		compatible = "samsung,exynos4212-hdmi";
-		reg = <0x14530000 0x100000>;
-		interrupts = <0 95 0>;
-		hpd-gpios = <&gpx3 7 1>;
-		ddc = <&hdmi_ddc_node>;
-		phy = <&hdmi_phy_node>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt
deleted file mode 100644
index 41eee971562b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Device-Tree bindings for hdmiddc driver
-
-Required properties:
-- compatible: value should be one of the following
-	1) "samsung,exynos5-hdmiddc" <DEPRECATED>
-	2) "samsung,exynos4210-hdmiddc"
-
-- reg: I2C address of the hdmiddc device.
-
-Example:
-
-	hdmiddc {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt
deleted file mode 100644
index 162f641f7639..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Device-Tree bindings for hdmiphy driver
-
-Required properties:
-- compatible: value should be one of the following:
-	1) "samsung,exynos5-hdmiphy" <DEPRECATED>
-	2) "samsung,exynos4210-hdmiphy".
-	3) "samsung,exynos4212-hdmiphy".
-- reg: I2C address of the hdmiphy device.
-
-Example:
-
-	hdmiphy {
-		compatible = "samsung,exynos4210-hdmiphy";
-		reg = <0x38>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt b/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt
deleted file mode 100644
index 3e38128f866b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Device-Tree bindings for mixer driver
-
-Required properties:
-- compatible: value should be one of the following:
-	1) "samsung,exynos5-mixer" <DEPRECATED>
-	2) "samsung,exynos4210-mixer"
-	3) "samsung,exynos4212-mixer"
-	4) "samsung,exynos5250-mixer"
-	5) "samsung,exynos5420-mixer"
-
-- reg: physical base address of the mixer and length of memory mapped
-	region.
-- interrupts: interrupt number to the cpu.
-- clocks: list of clock IDs from SoC clock driver.
-	a) mixer: Gate of Mixer IP bus clock.
-	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
-               mixer mux.
-	c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
-
-Example:
-
-	mixer {
-		compatible = "samsung,exynos5250-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
deleted file mode 100644
index b3096421d42b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-Device-Tree bindings for Samsung SoC display controller (FIMD)
-
-FIMD (Fully Interactive Mobile Display) is the Display Controller for the
-Samsung series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of the following
-		"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
-		"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
-		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
-		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
-		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
-		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
-		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
-
-- reg: physical base address and length of the FIMD registers set.
-
-- interrupts: should contain a list of all FIMD IP block interrupts in the
-		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- interrupt-names: should contain the interrupt names: "fifo", "vsync",
-	"lcd_sys", in the same order as they were listed in the interrupts
-        property.
-
-- pinctrl-0: pin control group to be used for this controller.
-
-- pinctrl-names: must contain a "default" entry.
-
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-
-- clock-names: list of clock names sorted in the same order as the clocks
-               property. Must contain "sclk_fimd" and "fimd".
-
-Optional Properties:
-- power-domains: a phandle to FIMD power domain node.
-- samsung,invert-vden: video enable signal is inverted
-- samsung,invert-vclk: video clock signal is inverted
-- display-timings: timing settings for FIMD, as described in document [1].
-		Can be used in case timings cannot be provided otherwise
-		or to override timings provided by the panel.
-- samsung,sysreg: handle to syscon used to control the system registers
-- i80-if-timings: timing configuration for lcd i80 interface support.
-  - cs-setup: clock cycles for the active period of address signal is enabled
-              until chip select is enabled.
-              If not specified, the default value(0) will be used.
-  - wr-setup: clock cycles for the active period of CS signal is enabled until
-              write signal is enabled.
-              If not specified, the default value(0) will be used.
-  - wr-active: clock cycles for the active period of CS is enabled.
-               If not specified, the default value(1) will be used.
-  - wr-hold: clock cycles for the active period of CS is disabled until write
-             signal is disabled.
-             If not specified, the default value(0) will be used.
-
-  The parameters are defined as:
-
-    VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
-                      :            :            :            :            :
-    Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
-                      | cs-setup+1 |            :            :            :
-                      |<---------->|            :            :            :
-    Chip Select     ???????????????|____________:____________:____________|??
-                                   | wr-setup+1 |            | wr-hold+1  |
-                                   |<---------->|            |<---------->|
-    Write Enable    ????????????????????????????|____________|???????????????
-                                                | wr-active+1|
-                                                |<---------->|
-    Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
-
-The device node can contain 'port' child nodes according to the bindings defined
-in [2]. The following are properties specific to those nodes:
-- reg: (required) port index, can be:
-		0 - for CAMIF0 input,
-		1 - for CAMIF1 input,
-		2 - for CAMIF2 input,
-		3 - for parallel output,
-		4 - for write-back interface
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-SoC specific DT entry:
-
-	fimd@11c00000 {
-		compatible = "samsung,exynos4210-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x11c00000 0x20000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock 140>, <&clock 283>;
-		clock-names = "sclk_fimd", "fimd";
-		power-domains = <&pd_lcd0>;
-		status = "disabled";
-	};
-
-Board specific DT entry:
-
-	fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/display/fsl,dcu.txt b/Documentation/devicetree/bindings/display/fsl,dcu.txt
deleted file mode 100644
index 63ec2a624aa9..000000000000
--- a/Documentation/devicetree/bindings/display/fsl,dcu.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Device Tree bindings for Freescale DCU DRM Driver
-
-Required properties:
-- compatible:		Should be one of
-	* "fsl,ls1021a-dcu".
-	* "fsl,vf610-dcu".
-
-- reg:			Address and length of the register set for dcu.
-- clocks:		Handle to "dcu" and "pix" clock (in the order below)
-			This can be the same clock (e.g. LS1021a)
-			See ../clocks/clock-bindings.txt for details.
-- clock-names:		Should be "dcu" and "pix"
-			See ../clocks/clock-bindings.txt for details.
-- big-endian		Boolean property, LS1021A DCU registers are big-endian.
-- port			Video port for the panel output
-
-Optional properties:
-- fsl,tcon:		The phandle to the timing controller node.
-
-Examples:
-dcu: dcu@2ce0000 {
-	compatible = "fsl,ls1021a-dcu";
-	reg = <0x0 0x2ce0000 0x0 0x10000>;
-	clocks = <&platform_clk 0>, <&platform_clk 0>;
-	clock-names = "dcu", "pix";
-	big-endian;
-	fsl,tcon = <&tcon>;
-
-	port {
-		dcu_out: endpoint {
-			remote-endpoint = <&panel_out>;
-	     };
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
index 900a56cae80e..2dd0411ec651 100644
--- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
+++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -20,6 +20,8 @@ properties:
           - fsl,imx23-lcdif
           - fsl,imx28-lcdif
           - fsl,imx6sx-lcdif
+          - fsl,imx8mp-lcdif
+          - fsl,imx93-lcdif
       - items:
           - enum:
               - fsl,imx6sl-lcdif
@@ -48,19 +50,44 @@ properties:
       - const: disp_axi
     minItems: 1
 
+  dmas:
+    items:
+      - description: DMA specifier for the RX DMA channel.
+
+  dma-names:
+    items:
+      - const: rx
+
   interrupts:
+    items:
+      - description: LCDIF DMA interrupt
+      - description: LCDIF Error interrupt
+    minItems: 1
+
+  power-domains:
     maxItems: 1
 
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: The LCDIF output port
 
+  display:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to display panel
+    deprecated: true
+
+  display0:
+    $ref: panel/panel-common.yaml#
+    deprecated: true
+
+  lcd-supply:
+    deprecated: true
+
 required:
   - compatible
   - reg
   - clocks
   - interrupts
-  - port
 
 additionalProperties: false
 
@@ -80,12 +107,91 @@ allOf:
           maxItems: 3
       required:
         - clock-names
-    else:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mp-lcdif
+              - fsl,imx93-lcdif
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          minItems: 3
+          maxItems: 3
+      required:
+        - clock-names
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,imx6sx-lcdif
+                - fsl,imx8mp-lcdif
+                - fsl,imx93-lcdif
+    then:
       properties:
         clocks:
           maxItems: 1
         clock-names:
           maxItems: 1
+  - if:
+      properties:
+        compatible:
+          const: fsl,imx6sx-lcdif
+    then:
+      required:
+        - power-domains
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sl-lcdif
+              - fsl,imx8mm-lcdif
+              - fsl,imx8mn-lcdif
+              - fsl,imx8mp-lcdif
+              - fsl,imx93-lcdif
+    then:
+      required:
+        - power-domains
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx23-lcdif
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,imx28-lcdif
+    then:
+      properties:
+        dmas: false
+        dma-names: false
+        display: false
+        display0: false
+        lcd-supply: false
+
+      required:
+        - port
 
 examples:
   - |
@@ -100,6 +206,7 @@ examples:
                  <&clks IMX6SX_CLK_LCDIF_APB>,
                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
         clock-names = "pix", "axi", "disp_axi";
+        power-domains = <&pd_disp>;
 
         port {
             endpoint {
diff --git a/Documentation/devicetree/bindings/display/fsl,ls1021a-dcu.yaml b/Documentation/devicetree/bindings/display/fsl,ls1021a-dcu.yaml
new file mode 100644
index 000000000000..72d14babe993
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,ls1021a-dcu.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,ls1021a-dcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale DCU DRM Driver
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1021a-dcu
+      - fsl,vf610-dcu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: dcu
+      - const: pix
+
+  big-endian: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: Video port for the panel output
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+  fsl,tcon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the timing controller node.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    display-controller@2ce0000 {
+        compatible = "fsl,ls1021a-dcu";
+        reg = <0x2ce0000 0x10000>;
+        clocks = <&platform_clk 0>, <&platform_clk 0>;
+        clock-names = "dcu", "pix";
+        big-endian;
+        fsl,tcon = <&tcon>;
+
+        port {
+            endpoint {
+                remote-endpoint = <&panel_out>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt
deleted file mode 100644
index 475008747801..000000000000
--- a/Documentation/devicetree/bindings/display/fsl,tcon.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Device Tree bindings for Freescale TCON Driver
-
-Required properties:
-- compatible:		Should be one of
-	* "fsl,vf610-tcon".
-
-- reg:			Address and length of the register set for tcon.
-- clocks:		From common clock binding: handle to tcon ipg clock.
-- clock-names:		From common clock binding: Shall be "ipg".
-
-Examples:
-timing-controller@4003d000 {
-	compatible = "fsl,vf610-tcon";
-	reg = <0x4003d000 0x1000>;
-	clocks = <&clks VF610_CLK_TCON0>;
-	clock-names = "ipg";
-};
diff --git a/Documentation/devicetree/bindings/display/fsl,vf610-tcon.yaml b/Documentation/devicetree/bindings/display/fsl,vf610-tcon.yaml
new file mode 100644
index 000000000000..06bd680524a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,vf610-tcon.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,vf610-tcon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale TCON
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-tcon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ipg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    timing-controller@4003d000 {
+        compatible = "fsl,vf610-tcon";
+        reg = <0x4003d000 0x1000>;
+        clocks = <&clks VF610_CLK_TCON0>;
+        clock-names = "ipg";
+    };
diff --git a/Documentation/devicetree/bindings/display/himax,hx8357.yaml b/Documentation/devicetree/bindings/display/himax,hx8357.yaml
new file mode 100644
index 000000000000..34c3b89bf003
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/himax,hx8357.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/himax,hx8357.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX8357D display panel
+
+description:
+  Display panels using a Himax HX8357D controller in SPI
+  mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - adafruit,yx350hv15
+              - himax,hx8357b
+          - const: himax,hx8357
+      - items:
+          - enum:
+              - himax,hx8369a
+          - const: himax,hx8369
+
+  reg:
+    maxItems: 1
+
+  dc-gpios:
+    maxItems: 1
+    description: D/C pin
+
+  rotation:
+    enum: [0, 90, 180, 270]
+
+  backlight:
+    description:
+      phandle of the backlight device attached to the panel
+
+  im-gpios:
+    maxItems: 3
+
+  reset-gpios:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "adafruit,yx350hv15", "himax,hx8357";
+            reg = <0>;
+            spi-max-frequency = <32000000>;
+            dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+            rotation = <90>;
+            backlight = <&backlight>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/display/himax,hx8357d.txt b/Documentation/devicetree/bindings/display/himax,hx8357d.txt
deleted file mode 100644
index e641f664763d..000000000000
--- a/Documentation/devicetree/bindings/display/himax,hx8357d.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Himax HX8357D display panels
-
-This binding is for display panels using a Himax HX8357D controller in SPI
-mode, such as the Adafruit 3.5" TFT for Raspberry Pi.
-
-Required properties:
-- compatible:	"adafruit,yx350hv15", "himax,hx8357d"
-- dc-gpios:	D/C pin
-- reg:		address of the panel on the SPI bus
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight:	phandle of the backlight device attached to the panel
-
-Example:
-	display@0{
-		compatible = "adafruit,yx350hv15", "himax,hx8357d";
-		reg = <0>;
-		spi-max-frequency = <32000000>;
-		dc-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
-		rotation = <90>;
-		backlight = <&backlight>;
-	};
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
deleted file mode 100644
index 169b32e4ee4e..000000000000
--- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Ilitek ILI9341 display panels
-
-This binding is for display panels using an Ilitek ILI9341 controller in SPI
-mode.
-
-Required properties:
-- compatible:	"adafruit,yx240qv29", "ilitek,ili9341"
-- dc-gpios:	D/C pin
-- reset-gpios:	Reset pin
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight:	phandle of the backlight device attached to the panel
-
-Example:
-	display@0{
-		compatible = "adafruit,yx240qv29", "ilitek,ili9341";
-		reg = <0>;
-		spi-max-frequency = <32000000>;
-		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		rotation = <270>;
-		backlight = <&backlight>;
-	};
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
index aecff34f505d..7d78edc403dc 100644
--- a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
+++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ilitek ILI9486 display panels device tree bindings
+title: Ilitek ILI9486 display panels
 
 maintainers:
   - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
@@ -50,15 +50,10 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    backlight: backlight {
-            compatible = "gpio-backlight";
-            gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-    };
     spi {
             #address-cells = <1>;
             #size-cells = <0>;
 
-
             display@0{
                     compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486";
                     reg = <0>;
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml
new file mode 100644
index 000000000000..92a0a797d099
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX DRM master device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The freescale i.MX DRM master device is a virtual device needed to list all
+  IPU or other display interface nodes that comprise the graphics subsystem.
+
+properties:
+  compatible:
+    const: fsl,imx-display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should contain a list of phandles pointing to camera
+      sensor interface ports of IPU devices.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "fsl,imx-display-subsystem";
+        ports = <&ipu_di0>;
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
deleted file mode 100644
index f4df9e83bcd2..000000000000
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Freescale imx21 Framebuffer
-
-This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
-
-Required properties:
-- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : One interrupt of the fb dev
-
-Required nodes:
-- display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/display/panel/display-timing.txt
-	Additional, the display node has to define properties:
-	- bits-per-pixel: Bits per pixel
-	- fsl,pcr: LCDC PCR value
-	A display node may optionally define
-	- fsl,aus-mode: boolean to enable AUS mode (only for imx21)
-
-Optional properties:
-- lcd-supply: Regulator for LCD supply voltage.
-- fsl,dmacr: DMA Control Register value. This is optional. By default, the
-	register is not modified as recommended by the datasheet.
-- fsl,lpccr: Contrast Control Register value. This property provides the
-	default value for the contrast control register.
-	If that property is omitted, the register is zeroed.
-- fsl,lscr1: LCDC Sharp Configuration Register value.
-
-Example:
-
-	imxfb: fb@10021000 {
-		compatible = "fsl,imx21-fb";
-		interrupts = <61>;
-		reg = <0x10021000 0x1000>;
-		display = <&display0>;
-	};
-
-	...
-
-	display0: display0 {
-		model = "Primeview-PD050VL1";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
-		display-timings {
-			native-mode = <&timing_disp0>;
-			timing_disp0: 640x480 {
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <112>;
-				hfront-porch = <36>;
-				hsync-len = <32>;
-				vback-porch = <33>;
-				vfront-porch = <33>;
-				vsync-len = <2>;
-				clock-frequency = <25000000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml
new file mode 100644
index 000000000000..c2b29622bceb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX LCD Controller, found on i.MX1, i.MX21, i.MX25 and i.MX27
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Pengutronix Kernel Team <kernel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-fb
+          - fsl,imx21-fb
+      - items:
+          - enum:
+              - fsl,imx25-fb
+              - fsl,imx27-fb
+          - const: fsl,imx21-fb
+      - items:
+          - const: fsl,imx25-lcdc
+          - const: fsl,imx21-lcdc
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
+      - const: per
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+  display:
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  lcd-supply:
+    description:
+      Regulator for LCD supply voltage.
+
+  fsl,dmacr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Override value for DMA Control Register
+
+  fsl,lpccr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Contrast Control Register value.
+
+  fsl,lscr1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      LCDC Sharp Configuration Register value.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx1-lcdc
+              - fsl,imx21-lcdc
+    then:
+      properties:
+        display: false
+        fsl,dmacr: false
+        fsl,lpccr: false
+        fsl,lscr1: false
+
+      required:
+        - port
+
+    else:
+      properties:
+        port: false
+
+      required:
+        - display
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    lcdc@53fbc000 {
+        compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc";
+        reg = <0x53fbc000 0x4000>;
+        interrupts = <39>;
+        clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+        clock-names = "ipg", "ahb", "per";
+
+        port {
+            parallel_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+        };
+    };
+  - |
+    imxfb: fb@10021000 {
+        compatible = "fsl,imx21-fb";
+        interrupts = <61>;
+        reg = <0x10021000 0x1000>;
+        display = <&display0>;
+        clocks = <&clks 103>, <&clks 49>, <&clks 66>;
+        clock-names = "ipg", "ahb", "per";
+    };
+
+    display0: display0 {
+        model = "Primeview-PD050VL1";
+        bits-per-pixel = <16>;
+        fsl,pcr = <0xf0c88080>; /* non-standard but required */
+
+        display-timings {
+            native-mode = <&timing_disp0>;
+            timing_disp0: timing0 {
+                hactive = <640>;
+                vactive = <480>;
+                hback-porch = <112>;
+                hfront-porch = <36>;
+                hsync-len = <32>;
+                vback-porch = <33>;
+                vfront-porch = <33>;
+                vsync-len = <2>;
+                clock-frequency = <25000000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml
new file mode 100644
index 000000000000..bbcfe7e2958b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-parallel-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parallel display support
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx-parallel-display
+
+  interface-pix-fmt:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - rgb24
+      - rgb565
+      - bgr666
+      - lvds666
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle describing the i2c bus handling the display data channel
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: input port connected to the IPU display interface
+
+  port@1:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: output port connected to a panel
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    display {
+        compatible = "fsl,imx-parallel-display";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interface-pix-fmt = "rgb24";
+
+        port@0 {
+            reg = <0>;
+
+            endpoint {
+                remote-endpoint = <&ipu_di0_disp0>;
+            };
+        };
+
+        port@1 {
+            reg = <1>;
+
+            endpoint {
+                remote-endpoint = <&panel_in>;
+            };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml
index af7fe9c4d196..180c4b510fb1 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml
@@ -31,14 +31,6 @@ properties:
   clock-names:
     maxItems: 2
 
-  ddc-i2c-bus:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description:
-      The HDMI DDC bus can be connected to either a system I2C master or the
-      functionally-reduced I2C master contained in the DWC HDMI. When connected
-      to a system I2C master this property contains a phandle to that I2C
-      master controller.
-
   gpr:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -87,7 +79,7 @@ required:
   - interrupts
   - ports
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml
new file mode 100644
index 000000000000..ec78645d4de0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6q-ipu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX IPUv3
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx51-ipu
+          - fsl,imx53-ipu
+          - fsl,imx6q-ipu
+      - items:
+          - const: fsl,imx6qp-ipu
+          - const: fsl,imx6q-ipu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: bus
+      - const: di0
+      - const: di1
+
+  resets:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  fsl,prg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to prg node associated with this IPU instance
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: CSI0
+
+  port@1:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: CSI1
+
+  port@2:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: DI0
+
+  port@3:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: DI1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    display-controller@18000000 {
+        compatible = "fsl,imx53-ipu";
+        reg = <0x18000000 0x080000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <11 10>;
+        resets = <&src 2>;
+
+        port@2 {
+            reg = <2>;
+
+            endpoint {
+                remote-endpoint = <&display_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml
new file mode 100644
index 000000000000..1646f41d8f72
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6q-ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale LVDS Display Bridge (ldb)
+
+description:
+  The LVDS Display Bridge device tree node contains up to two lvds-channel
+  nodes describing each of the two LVDS encoder channels of the bridge.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx53-ldb
+      - items:
+          - enum:
+              - fsl,imx6q-ldb
+          - const: fsl,imx53-ldb
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle points to the iomuxc-gpr region containing the LVDS
+      control register.
+
+  clocks:
+    minItems: 6
+    maxItems: 8
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: di0_pll
+          - const: di1_pll
+          - const: di0_sel
+          - const: di1_sel
+          - const: di0
+          - const: di1
+      - items:
+          - const: di0_pll
+          - const: di1_pll
+          - const: di0_sel
+          - const: di1_sel
+          - const: di2_sel
+          - const: di3_sel
+          - const: di0
+          - const: di1
+
+  fsl,dual-channel:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      if it exists, only LVDS channel 0 should
+      be configured - one input will be distributed on both outputs in dual
+      channel mode
+
+patternProperties:
+  '^lvds-channel@[0-1]$':
+    type: object
+    description:
+      Each LVDS Channel has to contain either an of graph link to a panel device node
+      or a display-timings node that describes the video timings for the connected
+      LVDS display as well as the fsl,data-mapping and fsl,data-width properties.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      display-timings:
+        $ref: /schemas/display/panel/display-timings.yaml#
+
+      fsl,data-mapping:
+        enum:
+          - spwg
+          - jeida
+
+      fsl,data-width:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: should be <18> or <24>
+        enum:
+          - 18
+          - 24
+
+      fsl,panel:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to lcd panel
+
+    patternProperties:
+      '^port@[0-4]$':
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          On i.MX5, the internal two-input-multiplexer is used. Due to hardware
+          limitations, only one input port (port@[0,1]) can be used for each channel
+          (lvds-channel@[0,1], respectively).
+          On i.MX6, there should be four input ports (port@[0-3]) that correspond
+          to the four LVDS multiplexer inputs.
+          A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected
+          to a panel input port. Optionally, the output port can be left out if
+          display-timings are used instead.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - gpr
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    ldb@53fa8008 {
+        compatible = "fsl,imx53-ldb";
+        reg = <0x53fa8008 0x4>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpr = <&gpr>;
+        clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+                 <&clks IMX5_CLK_LDB_DI1_SEL>,
+                 <&clks IMX5_CLK_IPU_DI0_SEL>,
+                 <&clks IMX5_CLK_IPU_DI1_SEL>,
+                 <&clks IMX5_CLK_LDB_DI0_GATE>,
+                 <&clks IMX5_CLK_LDB_DI1_GATE>;
+        clock-names = "di0_pll", "di1_pll",
+                      "di0_sel", "di1_sel",
+                      "di0", "di1";
+
+        /* Using an of-graph endpoint link to connect the panel */
+        lvds-channel@0 {
+                reg = <0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    endpoint {
+                        remote-endpoint = <&ipu_di0_lvds0>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+               };
+        };
+
+        /* Using display-timings and fsl,data-mapping/width instead */
+        lvds-channel@1 {
+                reg = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                fsl,data-mapping = "spwg";
+                fsl,data-width = <24>;
+
+                display-timings {/* ... */
+                };
+
+                port@1 {
+                     reg = <1>;
+
+                     endpoint {
+                         remote-endpoint = <&ipu_di1_lvds1>;
+                     };
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml
new file mode 100644
index 000000000000..73bc73ff6e69
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6qp-pre.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PRE (Prefetch Resolve Engine)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6qp-pre
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: axi
+  fsl,iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle pointing to the mmio-sram device node, that should be
+      used for the PRE SRAM double buffer.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pre@21c8000 {
+        compatible = "fsl,imx6qp-pre";
+        reg = <0x021c8000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&clks IMX6QDL_CLK_PRE0>;
+        clock-names = "axi";
+        fsl,iram = <&ocram2>;
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml
new file mode 100644
index 000000000000..582da8c489f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6qp-prg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PRG (Prefetch Resolve Gasket)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6qp-prg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: axi
+
+  fsl,pres:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      phandles to the PRE units attached to this PRG, with the fixed
+      PRE as the first entry and the muxable PREs following.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    prg@21cc000 {
+        compatible = "fsl,imx6qp-prg";
+        reg = <0x021cc000 0x1000>;
+        clocks = <&clks IMX6QDL_CLK_PRG0_APB>, <&clks IMX6QDL_CLK_PRG0_AXI>;
+        clock-names = "ipg", "axi";
+        fsl,pres = <&pre1>, <&pre2>, <&pre3>;
+    };
+
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml
new file mode 100644
index 000000000000..4f99682a308d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP HDMI Parallel Audio Interface
+
+maintainers:
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
+
+description:
+  The HDMI TX Parallel Audio Interface (HTX_PAI) is a bridge between the
+  Audio Subsystem to the HDMI TX Controller.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-hdmi-pai
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: apb
+
+  power-domains:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Output to the HDMI TX controller.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    audio-bridge@32fc4800 {
+        compatible = "fsl,imx8mp-hdmi-pai";
+        reg = <0x32fc4800 0x800>;
+        interrupt-parent = <&irqsteer_hdmi>;
+        interrupts = <14>;
+        clocks = <&clk IMX8MP_CLK_HDMI_APB>;
+        clock-names = "apb";
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PAI>;
+
+        port {
+            pai_to_hdmi_tx: endpoint {
+                remote-endpoint = <&hdmi_tx_from_pai>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
new file mode 100644
index 000000000000..56da1636014c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pvi.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pvi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP HDMI Parallel Video Interface
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+
+description:
+  The HDMI parallel video interface is a timing and sync generator block in the
+  i.MX8MP SoC, that sits between the video source and the HDMI TX controller.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-hdmi-pvi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from the LCDIF controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output to the HDMI TX controller.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    display-bridge@32fc4000 {
+        compatible = "fsl,imx8mp-hdmi-pvi";
+        reg = <0x32fc4000 0x44>;
+        interrupt-parent = <&irqsteer_hdmi>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                pvi_from_lcdif3: endpoint {
+                    remote-endpoint = <&lcdif3_to_pvi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                pvi_to_hdmi_tx: endpoint {
+                    remote-endpoint = <&hdmi_tx_from_pvi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml
new file mode 100644
index 000000000000..1d6501afc7f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller AXI Performance Counter
+
+description: |
+  Performance counters are provided to allow measurement of average bandwidth
+  and latency during operation. The following features are supported:
+
+  * Manual and timer controlled measurement mode.
+
+  * Measurement counters:
+    - GLOBAL_COUNTER for overall measurement time
+    - BUSY_COUNTER for number of data bus busy cycles
+    - DATA_COUNTER for number of data transfer cycles
+    - TRANSFER_COUNTER for number of transfers
+    - ADDRBUSY_COUNTER for number of address bus busy cycles
+    - LATENCY_COUNTER for average latency
+
+  * Counter overflow detection.
+
+  * Outstanding Transfer Counters (OTC) which are used for latency measurement
+    have to run immediately after reset, but can be disabled by software when
+    there is no need for latency measurement.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-axi-performance-counter
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+
+    pmu@5618f000 {
+        compatible = "fsl,imx8qxp-dc-axi-performance-counter";
+        reg = <0x5618f000 0x90>;
+        clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blit-engine.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blit-engine.yaml
new file mode 100644
index 000000000000..45db6da39e20
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blit-engine.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-blit-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Blit Engine
+
+description: |
+  A blit operation (block based image transfer) reads up to 3 source images
+  from memory and computes one destination image from it, which is written
+  back to memory. The following basic operations are supported:
+
+  * Buffer Fill
+    Fills a buffer with constant color
+
+  * Buffer Copy
+    Copies one source to a destination buffer.
+
+  * Image Blend
+    Combines two source images by a blending equation and writes result to
+    destination (which can be one of the sources).
+
+  * Image Rop2/3
+    Combines up to three source images by a logical equation (raster operation)
+    and writes result to destination (which can be one of the sources).
+
+  * Image Flip
+    Mirrors the source image in horizontal and/or vertical direction.
+
+  * Format Convert
+    Convert between the supported color and buffer formats.
+
+  * Color Transform
+    Modify colors by linear or non-linear transformations.
+
+  * Image Scale
+    Changes size of the source image.
+
+  * Image Rotate
+    Rotates the source image by any angle.
+
+  * Image Filter
+    Performs an FIR filter operation on the source image.
+
+  * Image Warp
+    Performs a re-sampling of the source image with any pattern. The sample
+    point positions are read from a compressed coordinate buffer.
+
+  * Buffer Pack
+    Writes an image with color components stored in up to three different
+    buffers (planar formats) into a single buffer (packed format).
+
+  * Chroma Resample
+    Converts between different YUV formats that differ in chroma sampling rate
+    (4:4:4, 4:2:2, 4:2:0).
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-blit-engine
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^blitblend@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-blitblend
+
+  "^clut@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-clut
+
+  "^fetchdecode@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-fetchdecode
+
+  "^fetcheco@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-fetcheco
+
+  "^fetchwarp@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-fetchwarp
+
+  "^filter@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-filter
+
+  "^hscaler@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-hscaler
+
+  "^matrix@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-matrix
+
+  "^rop@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-rop
+
+  "^store@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-store
+
+  "^vscaler@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-vscaler
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    blit-engine@56180820 {
+        compatible = "fsl,imx8qxp-dc-blit-engine";
+        reg = <0x56180820 0x13c>, <0x56181000 0x3400>;
+        reg-names = "pec", "cfg";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        fetchdecode@56180820 {
+            compatible = "fsl,imx8qxp-dc-fetchdecode";
+            reg = <0x56180820 0x10>, <0x56181000 0x404>;
+            reg-names = "pec", "cfg";
+        };
+
+        store@56180940 {
+            compatible = "fsl,imx8qxp-dc-store";
+            reg = <0x56180940 0x1c>, <0x56184000 0x5c>;
+            reg-names = "pec", "cfg";
+            interrupt-parent = <&dc0_intc>;
+            interrupts = <0>, <1>, <2>;
+            interrupt-names = "shdload", "framecomplete", "seqcomplete";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blitblend.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blitblend.yaml
new file mode 100644
index 000000000000..095e65939fba
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blitblend.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-blitblend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Blit Blend Unit
+
+description:
+  Combines two input frames to a single output frame, all frames having the
+  same dimension.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-blitblend
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    blitblend@56180920 {
+        compatible = "fsl,imx8qxp-dc-blitblend";
+        reg = <0x56180920 0x10>, <0x56183c00 0x3c>;
+        reg-names = "pec", "cfg";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-clut.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-clut.yaml
new file mode 100644
index 000000000000..21d42aa11b52
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-clut.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-clut.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Color Lookup Table
+
+description: |
+  The unit implements 3 look-up tables with 256 x 10 bit entries each. These
+  can be used for different kinds of applications. From 10-bit input values
+  only upper 8 bits are used.
+
+  The unit supports color lookup, index lookup, dithering and alpha masking.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-clut
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clut@56180880 {
+        compatible = "fsl,imx8qxp-dc-clut";
+        reg = <0x56180880 0x10>, <0x56182400 0x404>;
+        reg-names = "pec", "cfg";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml
new file mode 100644
index 000000000000..27118f4c0d28
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Command Sequencer
+
+description: |
+  The Command Sequencer is designed to autonomously process command lists.
+  By that it can load setups into the DC configuration and synchronize to
+  hardware events.  This releases a system's CPU from workload, because it
+  does not need to wait for certain events.  Also it simplifies SW architecture,
+  because no interrupt handlers are required.  Setups are read via AXI bus,
+  while write access to configuration registers occurs directly via an internal
+  bus.  This saves bandwidth for the AXI interconnect and improves the system
+  architecture in terms of safety aspects.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-command-sequencer
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 5
+
+  interrupt-names:
+    items:
+      - const: error
+      - const: sw0
+      - const: sw1
+      - const: sw2
+      - const: sw3
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle pointing to the mmio-sram device node
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+
+    command-sequencer@56180400 {
+        compatible = "fsl,imx8qxp-dc-command-sequencer";
+        reg = <0x56180400 0x1a4>;
+        clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+        interrupt-parent = <&dc0_intc>;
+        interrupts = <36>, <37>, <38>, <39>, <40>;
+        interrupt-names = "error", "sw0", "sw1", "sw2", "sw3";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-constframe.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-constframe.yaml
new file mode 100644
index 000000000000..94f678563608
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-constframe.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-constframe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Constant Frame
+
+description: |
+  The Constant Frame unit is used instead of a Fetch unit where generation of
+  constant color frames only is sufficient. This is the case for the background
+  planes of content and safety streams in a Display Controller.
+
+  The color can be setup to any RGBA value.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-constframe
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    constframe@56180960 {
+        compatible = "fsl,imx8qxp-dc-constframe";
+        reg = <0x56180960 0xc>, <0x56184400 0x20>;
+        reg-names = "pec", "cfg";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-display-engine.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-display-engine.yaml
new file mode 100644
index 000000000000..91f3bb77d8d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-display-engine.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-display-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Display Engine
+
+description:
+  All Processing Units that operate in a display clock domain. Pixel pipeline
+  is driven by a video timing and cannot be stalled. Implements all display
+  specific processing.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-display-engine
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: top
+      - const: cfg
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: shdload
+      - const: framecomplete
+      - const: seqcomplete
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^dither@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-dither
+
+  "^framegen@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-framegen
+
+  "^gammacor@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-gammacor
+
+  "^matrix@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-matrix
+
+  "^signature@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-signature
+
+  "^tcon@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-tcon
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    display-engine@5618b400 {
+        compatible = "fsl,imx8qxp-dc-display-engine";
+        reg = <0x5618b400 0x14>, <0x5618b800 0x1c00>;
+        reg-names = "top", "cfg";
+        interrupt-parent = <&dc0_intc>;
+        interrupts = <15>, <16>, <17>;
+        interrupt-names = "shdload", "framecomplete", "seqcomplete";
+        power-domains = <&pd IMX_SC_R_DC_0_PLL_0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        framegen@5618b800 {
+            compatible = "fsl,imx8qxp-dc-framegen";
+            reg = <0x5618b800 0x98>;
+            clocks = <&dc0_disp_lpcg IMX_LPCG_CLK_0>;
+            interrupt-parent = <&dc0_intc>;
+            interrupts = <18>, <19>, <20>, <21>, <41>, <42>, <43>, <44>;
+            interrupt-names = "int0", "int1", "int2", "int3",
+                              "primsync_on", "primsync_off",
+                              "secsync_on", "secsync_off";
+        };
+
+        tcon@5618c800 {
+            compatible = "fsl,imx8qxp-dc-tcon";
+            reg = <0x5618c800 0x588>;
+
+            port {
+                dc0_disp0_dc0_pixel_combiner_ch0: endpoint {
+                    remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_disp0>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-dither.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-dither.yaml
new file mode 100644
index 000000000000..8e4468d91836
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-dither.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-dither.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Dither Unit
+
+description: |
+  The unit can increase the physical color resolution of a display from 5, 6, 7
+  or 8 bits per RGB channel to a virtual resolution of 10 bits. The physical
+  resolution can be set individually for each channel.
+
+  The resolution is increased by mixing the two physical colors that are nearest
+  to the virtual color code in a variable ratio either by time (temporal
+  dithering) or by position (spatial dithering).
+
+  An optimized algorithm for temporal dithering minimizes noise artifacts on the
+  output image.
+
+  The dither operation can be individually enabled or disabled for each pixel
+  using the alpha input bit.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-dither
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    dither@5618c400 {
+        compatible = "fsl,imx8qxp-dc-dither";
+        reg = <0x5618c400 0x14>;
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-extdst.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-extdst.yaml
new file mode 100644
index 000000000000..dfc2d4f94f8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-extdst.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-extdst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller External Destination Interface
+
+description: |
+  The External Destination unit is the interface between the internal pixel
+  processing pipeline of the Pixel Engine, which is 30-bit RGB plus 8-bit Alpha,
+  and a Display Engine.
+
+  It comprises the following built-in Gamma apply function.
+
+  +------X-----------------------+
+  |      |          ExtDst Unit  |
+  |      V                       |
+  |  +-------+                   |
+  |  | Gamma |                   |
+  |  +-------+                   |
+  |      |                       |
+  |      V                       +
+  +------X-----------------------+
+
+  The output format is 24-bit RGB plus 1-bit Alpha. Conversion from 10 to 8
+  bits is done by LSBit truncation.  Alpha output bit is 1 for input 255, 0
+  otherwise.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-extdst
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: shdload
+      - const: framecomplete
+      - const: seqcomplete
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    extdst@56180980 {
+        compatible = "fsl,imx8qxp-dc-extdst";
+        reg = <0x56180980 0x1c>, <0x56184800 0x28>;
+        reg-names = "pec", "cfg";
+        interrupt-parent = <&dc0_intc>;
+        interrupts = <3>, <4>, <5>;
+        interrupt-names = "shdload", "framecomplete", "seqcomplete";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchunit.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchunit.yaml
new file mode 100644
index 000000000000..97fb6a4598d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchunit.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-fetchunit.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Fetch Unit
+
+description: |
+  The Fetch Unit is the interface between the AXI bus for source buffer access
+  and the internal pixel processing pipeline, which is 30-bit RGB plus 8-bit
+  Alpha.
+
+  It is used to generate foreground planes in Display Controllers and source
+  planes in Blit Engines, and comprises the following built-in functions to
+  convert a wide range of frame buffer types.
+
+  +---------X-----------------------------------------+
+  |         |                           Fetch Unit    |
+  |         V                                         |
+  |    +---------+                                    |
+  |    |         |                                    |
+  |    | Decode  | Decompression [Decode]             |
+  |    |         |                                    |
+  |    +---------+                                    |
+  |         |                                         |
+  |         V                                         |
+  |    +---------+                                    |
+  |    | Clip &  | Clip Window [All]                  |
+  |    | Overlay | Plane composition [Layer, Warp]    |
+  |    |         |                                    |
+  |    +---------+                                    |
+  |         |                                         |
+  |         V                                         |
+  |    +---------+                                    |
+  |    | Re-     | Flip/Rotate/Repl./Drop [All]       |
+  X--> | sample  | Perspective/Affine warping [Persp] |
+  | |  |         | Arbitrary warping [Warp, Persp]    |
+  | |  +---------+                                    |
+  | |       |                                         |
+  | |       V                                         |
+  | |  +---------+                                    |
+  | |  |         |                                    |
+  | |  | Palette | Color Palette [Layer, Decode]      |
+  | |  |         |                                    |
+  | |  +---------+                                    |
+  | |       |                                         |
+  | |       V                                         |
+  | |  +---------+                                    |
+  | |  | Extract | Raw to RGBA/YUV [All]              |
+  | |  | &       | Bit width expansion [All]          |
+  | |  | Expand  |                                    |
+  | |  +---------+                                    |
+  | |       |                                         |
+  | |       V                                         |
+  | |  +---------+                                    |
+  | |  |         | Planar to packed                   |
+  | |->| Combine | [Decode, Warp, Persp]              |
+  | |  |         |                                    |
+  | |  +---------+                                    |
+  | |       |                                         |
+  | |       V                                         |
+  | |  +---------+                                    |
+  | |  |         | YUV422 to YUV444                   |
+  | |  | Chroma  | [Decode, Persp]                    |
+  | |  |         |                                    |
+  | |  +---------+                                    |
+  | |       |                                         |
+  | |       V                                         |
+  | |  +---------+                                    |
+  | |  |         | YUV to RGB                         |
+  | |  | Color   | [Warp, Persp, Decode, Layer]       |
+  | |  |         |                                    |
+  | |  +---------+                                    |
+  | |       |                                         |
+  | |       V                                         |
+  | |  +---------+                                    |
+  | |  |         | Gamma removal                      |
+  | |  | Gamma   | [Warp, Persp, Decode, Layer]       |
+  | |  |         |                                    |
+  | |  +---------+                                    |
+  | |       |                                         |
+  | |       V                                         |
+  | |  +---------+                                    |
+  | |  |         | Alpla multiply, RGB pre-multiply   |
+  |  ->| Multiply| [Warp, Persp, Decode, Layer]       |
+  |    |         |                                    |
+  |     ---------                                     |
+  |         |                                         |
+  |         V                                         |
+  |    +---------+                                    |
+  |    |         | Bilinear filter                    |
+  |    | Filter  | [Warp, Persp]                      |
+  |    |         |                                    |
+  |    +---------+                                    |
+  |         |                                         |
+  |         V                                         |
+  +---------X-----------------------------------------+
+
+  Note that different derivatives of the Fetch Unit exist. Each implements a
+  specific subset only of the pipeline stages shown above. Restrictions for the
+  units are specified in [square brackets].
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-dc-fetchdecode
+      - fsl,imx8qxp-dc-fetcheco
+      - fsl,imx8qxp-dc-fetchlayer
+      - fsl,imx8qxp-dc-fetchwarp
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+  fsl,prg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Optional Prefetch Resolve Gasket associated with the Fetch Unit.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    fetchlayer@56180ac0 {
+        compatible = "fsl,imx8qxp-dc-fetchlayer";
+        reg = <0x56180ac0 0xc>, <0x56188400 0x404>;
+        reg-names = "pec", "cfg";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-filter.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-filter.yaml
new file mode 100644
index 000000000000..5c54d5179ee3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-filter.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-filter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Filter Unit
+
+description: |
+  5x5 FIR filter with 25 programmable coefficients.
+
+  Typical applications are image blurring, sharpening or support for edge
+  detection algorithms.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-filter
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    filter@56180900 {
+        compatible = "fsl,imx8qxp-dc-filter";
+        reg = <0x56180900 0x10>, <0x56183800 0x30>;
+        reg-names = "pec", "cfg";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-framegen.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-framegen.yaml
new file mode 100644
index 000000000000..9d1dc3a9de90
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-framegen.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-framegen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Frame Generator
+
+description:
+  The Frame Generator (FrameGen) module generates a programmable video timing
+  and optionally allows to synchronize the generated video timing to external
+  synchronization signals.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-framegen
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: int0
+      - const: int1
+      - const: int2
+      - const: int3
+      - const: primsync_on
+      - const: primsync_off
+      - const: secsync_on
+      - const: secsync_off
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    framegen@5618b800 {
+        compatible = "fsl,imx8qxp-dc-framegen";
+        reg = <0x5618b800 0x98>;
+        clocks = <&dc0_disp_lpcg IMX_LPCG_CLK_0>;
+        interrupt-parent = <&dc0_intc>;
+        interrupts = <18>, <19>, <20>, <21>, <41>, <42>, <43>, <44>;
+        interrupt-names = "int0", "int1", "int2", "int3",
+                          "primsync_on", "primsync_off",
+                          "secsync_on", "secsync_off";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-gammacor.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-gammacor.yaml
new file mode 100644
index 000000000000..25ad85742912
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-gammacor.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-gammacor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Gamma Correction Unit
+
+description: The unit supports non-linear color transformation.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-gammacor
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    gammacor@5618c000 {
+        compatible = "fsl,imx8qxp-dc-gammacor";
+        reg = <0x5618c000 0x20>;
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-layerblend.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-layerblend.yaml
new file mode 100644
index 000000000000..2a6ab8a0ed7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-layerblend.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-layerblend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Layer Blend Unit
+
+description: Combines two input frames to a single output frame.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-layerblend
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    layerblend@56180ba0 {
+        compatible = "fsl,imx8qxp-dc-layerblend";
+        reg = <0x56180ba0 0x10>, <0x5618a400 0x20>;
+        reg-names = "pec", "cfg";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-matrix.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-matrix.yaml
new file mode 100644
index 000000000000..d773389dd0dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-matrix.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-matrix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Color Matrix
+
+description:
+  The unit supports linear color transformation, alpha pre-multiply and
+  alpha masking.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-matrix
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    oneOf:
+      - const: cfg      # matrix in display engine
+      - items:          # matrix in pixel engine
+          - const: pec
+          - const: cfg
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    matrix@5618bc00 {
+        compatible = "fsl,imx8qxp-dc-matrix";
+        reg = <0x5618bc00 0x3c>;
+        reg-names = "cfg";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-pixel-engine.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-pixel-engine.yaml
new file mode 100644
index 000000000000..633443a6cc38
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-pixel-engine.yaml
@@ -0,0 +1,250 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-pixel-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Pixel Engine
+
+description:
+  All Processing Units that operate in the AXI bus clock domain. Pixel
+  pipelines have the ability to stall when a destination is busy. Implements
+  all communication to memory resources and most of the image processing
+  functions. Interconnection of Processing Units is re-configurable.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-pixel-engine
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^blit-engine@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-blit-engine
+
+  "^constframe@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-constframe
+
+  "^extdst@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-extdst
+
+  "^fetchdecode@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-fetchdecode
+
+  "^fetcheco@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-fetcheco
+
+  "^fetchlayer@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-fetchlayer
+
+  "^fetchwarp@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-fetchwarp
+
+  "^hscaler@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-hscaler
+
+  "^layerblend@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-layerblend
+
+  "^matrix@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-matrix
+
+  "^safety@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-safety
+
+  "^vscaler@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-vscaler
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+
+    pixel-engine@56180800 {
+        compatible = "fsl,imx8qxp-dc-pixel-engine";
+        reg = <0x56180800 0xac00>;
+        clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        constframe@56180960 {
+            compatible = "fsl,imx8qxp-dc-constframe";
+            reg = <0x56180960 0xc>, <0x56184400 0x20>;
+            reg-names = "pec", "cfg";
+        };
+
+        extdst@56180980 {
+            compatible = "fsl,imx8qxp-dc-extdst";
+            reg = <0x56180980 0x1c>, <0x56184800 0x28>;
+            reg-names = "pec", "cfg";
+            interrupt-parent = <&dc0_intc>;
+            interrupts = <3>, <4>, <5>;
+            interrupt-names = "shdload", "framecomplete", "seqcomplete";
+        };
+
+        constframe@561809a0 {
+            compatible = "fsl,imx8qxp-dc-constframe";
+            reg = <0x561809a0 0xc>, <0x56184c00 0x20>;
+            reg-names = "pec", "cfg";
+        };
+
+        extdst@561809c0 {
+            compatible = "fsl,imx8qxp-dc-extdst";
+            reg = <0x561809c0 0x1c>, <0x56185000 0x28>;
+            reg-names = "pec", "cfg";
+            interrupt-parent = <&dc0_intc>;
+            interrupts = <6>, <7>, <8>;
+            interrupt-names = "shdload", "framecomplete", "seqcomplete";
+        };
+
+        constframe@561809e0 {
+            compatible = "fsl,imx8qxp-dc-constframe";
+            reg = <0x561809e0 0xc>, <0x56185400 0x20>;
+            reg-names = "pec", "cfg";
+        };
+
+        extdst@56180a00 {
+            compatible = "fsl,imx8qxp-dc-extdst";
+            reg = <0x56180a00 0x1c>, <0x56185800 0x28>;
+            reg-names = "pec", "cfg";
+            interrupt-parent = <&dc0_intc>;
+            interrupts = <9>, <10>, <11>;
+            interrupt-names = "shdload", "framecomplete", "seqcomplete";
+        };
+
+        constframe@56180a20 {
+            compatible = "fsl,imx8qxp-dc-constframe";
+            reg = <0x56180a20 0xc>, <0x56185c00 0x20>;
+            reg-names = "pec", "cfg";
+        };
+
+        extdst@56180a40 {
+            compatible = "fsl,imx8qxp-dc-extdst";
+            reg = <0x56180a40 0x1c>, <0x56186000 0x28>;
+            reg-names = "pec", "cfg";
+            interrupt-parent = <&dc0_intc>;
+            interrupts = <12>, <13>, <14>;
+            interrupt-names = "shdload", "framecomplete", "seqcomplete";
+        };
+
+        fetchwarp@56180a60 {
+            compatible = "fsl,imx8qxp-dc-fetchwarp";
+            reg = <0x56180a60 0x10>, <0x56186400 0x190>;
+            reg-names = "pec", "cfg";
+        };
+
+        fetchlayer@56180ac0 {
+            compatible = "fsl,imx8qxp-dc-fetchlayer";
+            reg = <0x56180ac0 0xc>, <0x56188400 0x404>;
+            reg-names = "pec", "cfg";
+        };
+
+        layerblend@56180ba0 {
+            compatible = "fsl,imx8qxp-dc-layerblend";
+            reg = <0x56180ba0 0x10>, <0x5618a400 0x20>;
+            reg-names = "pec", "cfg";
+        };
+
+        layerblend@56180bc0 {
+            compatible = "fsl,imx8qxp-dc-layerblend";
+            reg = <0x56180bc0 0x10>, <0x5618a800 0x20>;
+            reg-names = "pec", "cfg";
+        };
+
+        layerblend@56180be0 {
+            compatible = "fsl,imx8qxp-dc-layerblend";
+            reg = <0x56180be0 0x10>, <0x5618ac00 0x20>;
+            reg-names = "pec", "cfg";
+        };
+
+        layerblend@56180c00 {
+            compatible = "fsl,imx8qxp-dc-layerblend";
+            reg = <0x56180c00 0x10>, <0x5618b000 0x20>;
+            reg-names = "pec", "cfg";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-rop.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-rop.yaml
new file mode 100644
index 000000000000..7115950ecae0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-rop.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-rop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Raster Operation Unit
+
+description: |
+  The unit can combine up to three input frames to a single output frame, all
+  having the same dimension.
+
+  The unit supports logic operations, arithmetic operations and packing.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-rop
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rop@56180860 {
+        compatible = "fsl,imx8qxp-dc-rop";
+        reg = <0x56180860 0x10>, <0x56182000 0x20>;
+        reg-names = "pec", "cfg";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-safety.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-safety.yaml
new file mode 100644
index 000000000000..66c12948ab09
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-safety.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-safety.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Safety Unit
+
+description:
+  The unit allows corresponding processing units to be configured in a path
+  leading to multiple endpoints.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-safety
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    safety@56180800 {
+        compatible = "fsl,imx8qxp-dc-safety";
+        reg = <0x56180800 0x1c>;
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-scaling-engine.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-scaling-engine.yaml
new file mode 100644
index 000000000000..76cbe11a6364
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-scaling-engine.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-scaling-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Scaling Engine
+
+description: |
+  The unit can change the dimension of the input frame by nearest or linear
+  re-sampling with 1/32 sub pixel precision.
+
+  Internally it consist of two independent blocks for horizontal and vertical
+  scaling. The sequence of both operations is arbitrary.
+
+  Any frame dimensions between 1 and 16384 pixels in width and height are
+  supported, except that the vertical scaler has a frame width maximum
+  depending of the system's functional limitations.
+
+  In general all scale factors are supported inside the supported frame
+  dimensions. In range of scale factors 1/16..16 the filtered output colors
+  are LSBit precise (e.g. DC ripple free).
+
+                       +-----------+
+                       |   Line    |
+                       |  Buffer   |
+                       +-----------+
+                             ^
+                             |
+                             V
+                 |\    +-----------+
+           ------+ |   |           |
+          |      | +-->| Vertical  |----
+          |  ----+ |   |  Scaler   |    |
+          | |    |/    +-----------+    |
+          | |                           |
+          | |                           |
+          | |                           |     |\
+          |  ------------- -------------+-----+ |
+  Input --+               X                   | +--> Output
+          |  ------------- -------------+-----+ |
+          | |                           |     |/
+          | |                           |
+          | |    |\    +-----------+    |
+          |  ----+ |   |           |    |
+          |      | +-->| Horizontal|----
+           ------+ |   |  Scaler   |
+                 |/    +-----------+
+
+  The unit supports downscaling, upscaling, sub pixel translation and bob
+  de-interlacing.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-dc-hscaler
+      - fsl,imx8qxp-dc-vscaler
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    hscaler@561808c0 {
+        compatible = "fsl,imx8qxp-dc-hscaler";
+        reg = <0x561808c0 0x10>, <0x56183000 0x18>;
+        reg-names = "pec", "cfg";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-signature.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-signature.yaml
new file mode 100644
index 000000000000..c495822fdc80
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-signature.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-signature.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Signature Unit
+
+description: |
+  In order to control the correctness of display output, signature values can
+  be computed for each frame and compared against reference values. In case of
+  a mismatch (signature violation) a HW event can be triggered, for example a
+  SW interrupt.
+
+  This unit supports signature computation, reference check, evaluation windows,
+  alpha masking and panic modes.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-signature
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: shdload
+      - const: valid
+      - const: error
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    signature@5618d000 {
+        compatible = "fsl,imx8qxp-dc-signature";
+        reg = <0x5618d000 0x140>;
+        interrupt-parent = <&dc0_intc>;
+        interrupts = <22>, <23>, <24>;
+        interrupt-names = "shdload", "valid", "error";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-store.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-store.yaml
new file mode 100644
index 000000000000..42d1b10906be
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-store.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-store.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Store Unit
+
+description: |
+  The Store unit is the interface between the internal pixel processing
+  pipeline, which is 30-bit RGB plus 8-bit Alpha, and the AXI bus for
+  destination buffer access. It is used for the destination of Blit Engines.
+  It comprises a set of built-in functions to generate a wide range of buffer
+  formats. Note, that these are exactly inverse to corresponding functions in
+  the Fetch Unit.
+
+  +------X-------------------------+
+  |      |              Store Unit |
+  |      V                         |
+  |  +-------+                     |
+  |  | Gamma | Gamma apply         |
+  |  +-------+                     |
+  |      |                         |
+  |      V                         |
+  |  +-------+                     |
+  |  | Color | RGB to YUV          |
+  |  +-------+                     |
+  |      |                         |
+  |      V                         |
+  |  +-------+                     |
+  |  | Chroma| YUV444 to 422       |
+  |  +-------+                     |
+  |      |                         |
+  |      V                         |
+  |  +-------+                     |
+  |  | Reduce| Bit width reduction |
+  |  |       | dithering           |
+  |  +-------+                     |
+  |      |                         |
+  |      V                         |
+  |  +-------+                     |
+  |  | Pack  | RGBA/YUV to RAW     |
+  |  | Encode| or Compression      |
+  |  +-------+                     |
+  |      |                         |
+  |      V                         |
+  +------X-------------------------+
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-store
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: shdload
+      - const: framecomplete
+      - const: seqcomplete
+
+  fsl,lts:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Optional Linear Tile Store associated with the Store Unit.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    store@56180940 {
+        compatible = "fsl,imx8qxp-dc-store";
+        reg = <0x56180940 0x1c>, <0x56184000 0x5c>;
+        reg-names = "pec", "cfg";
+        interrupt-parent = <&dc0_intc>;
+        interrupts = <0>, <1>, <2>;
+        interrupt-names = "shdload", "framecomplete", "seqcomplete";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-tcon.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-tcon.yaml
new file mode 100644
index 000000000000..7a3b77ea92c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-tcon.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-tcon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Timing Controller
+
+description:
+  The TCon can generate a wide range of customized synchronization signals and
+  does the mapping of the color bits to the output.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-tcon
+
+  reg:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: video output
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    tcon@5618c800 {
+        compatible = "fsl,imx8qxp-dc-tcon";
+        reg = <0x5618c800 0x588>;
+
+        port {
+            dc0_disp0_dc0_pixel_combiner_ch0: endpoint {
+                remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_disp0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml
new file mode 100644
index 000000000000..0a72f9f0b5fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller
+
+description: |
+  The Freescale i.MX8qxp Display Controller(DC) is comprised of three main
+  components that include a blit engine for 2D graphics accelerations, display
+  controller for display output processing, as well as a command sequencer.
+
+                                  Display buffers              Source buffers
+                                 (AXI read master)            (AXI read master)
+                                  | .......... |                  | | |
+      +---------------------------+------------+------------------+-+-+------+
+      | Display Controller (DC)   | .......... |                  | | |      |
+      |                           |            |                  | | |      |
+      |   @@@@@@@@@@@  +----------+------------+------------+     | | |      |
+  A   |  | Command   | |          V            V            |     | | |      |
+  X <-+->| Sequencer | |    @@@@@@@@@@@@@@@@@@@@@@@@@@@@    |     V V V      |
+  I   |  | (AXI CLK) | |   |                            |   |   @@@@@@@@@@   |
+      |   @@@@@@@@@@@  |   |       Pixel Engine         |   |  |          |  |
+      |       |        |   |         (AXI CLK)          |   |  |          |  |
+      |       V        |    @@@@@@@@@@@@@@@@@@@@@@@@@@@@    |  |          |  |
+  A   |   ***********  |       |   |            |   |       |  |   Blit   |  |
+  H <-+->| Configure | |       V   V            V   V       |  |  Engine  |  |
+  B   |  | (CFG CLK) | |    00000000000      11111111111    |  | (AXI CLK)|  |
+      |   ***********  |   |  Display  |    |  Display  |   |  |          |  |
+      |                |   |  Engine   |    |  Engine   |   |  |          |  |
+      |                |   | (Disp CLK)|    | (Disp CLK)|   |  |          |  |
+      |   @@@@@@@@@@@  |    00000000000      11111111111    |   @@@@@@@@@@   |
+  I   |  |  Common   | |         |                |         |       |        |
+  R <-+--|  Control  | |         |    Display     |         |       |        |
+  Q   |  | (AXI CLK) | |         |   Controller   |         |       |        |
+      |   @@@@@@@@@@@  +------------------------------------+       |        |
+      |                          |                |       ^         |        |
+      +--------------------------+----------------+-------+---------+--------+
+              ^                  |                |       |         |
+              |                  V                V       |         V
+       Clocks & Resets        Display          Display  Panic   Destination
+                              Output0          Output1 Control    buffer
+                                                              (AXI write master)
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: axi
+      - const: cfg
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^command-sequencer@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-command-sequencer
+
+  "^display-engine@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-display-engine
+
+  "^interrupt-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-intc
+
+  "^pixel-engine@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-pixel-engine
+
+  "^pmu@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-axi-performance-counter
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    display-controller@56180000 {
+        compatible = "fsl,imx8qxp-dc";
+        reg = <0x56180000 0x40000>;
+        clocks = <&dc0_lpcg IMX_LPCG_CLK_4>;
+        power-domains = <&pd IMX_SC_R_DC_0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        interrupt-controller@56180040 {
+            compatible = "fsl,imx8qxp-dc-intc";
+            reg = <0x56180040 0x60>;
+            clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+            interrupt-controller;
+            interrupt-parent = <&dc0_irqsteer>;
+            #interrupt-cells = <1>;
+            interrupts = <448>, <449>, <450>,  <64>,
+                          <65>,  <66>,  <67>,  <68>,
+                          <69>,  <70>, <193>, <194>,
+                         <195>, <196>, <197>,  <72>,
+                          <73>,  <74>,  <75>,  <76>,
+                          <77>,  <78>,  <79>,  <80>,
+                          <81>, <199>, <200>, <201>,
+                         <202>, <203>, <204>, <205>,
+                         <206>, <207>, <208>,   <5>,
+                           <0>,   <1>,   <2>,   <3>,
+                           <4>,  <82>,  <83>,  <84>,
+                          <85>, <209>, <210>, <211>,
+                         <212>;
+            interrupt-names = "store9_shdload",
+                              "store9_framecomplete",
+                              "store9_seqcomplete",
+                              "extdst0_shdload",
+                              "extdst0_framecomplete",
+                              "extdst0_seqcomplete",
+                              "extdst4_shdload",
+                              "extdst4_framecomplete",
+                              "extdst4_seqcomplete",
+                              "extdst1_shdload",
+                              "extdst1_framecomplete",
+                              "extdst1_seqcomplete",
+                              "extdst5_shdload",
+                              "extdst5_framecomplete",
+                              "extdst5_seqcomplete",
+                              "disengcfg_shdload0",
+                              "disengcfg_framecomplete0",
+                              "disengcfg_seqcomplete0",
+                              "framegen0_int0",
+                              "framegen0_int1",
+                              "framegen0_int2",
+                              "framegen0_int3",
+                              "sig0_shdload",
+                              "sig0_valid",
+                              "sig0_error",
+                              "disengcfg_shdload1",
+                              "disengcfg_framecomplete1",
+                              "disengcfg_seqcomplete1",
+                              "framegen1_int0",
+                              "framegen1_int1",
+                              "framegen1_int2",
+                              "framegen1_int3",
+                              "sig1_shdload",
+                              "sig1_valid",
+                              "sig1_error",
+                              "reserved",
+                              "cmdseq_error",
+                              "comctrl_sw0",
+                              "comctrl_sw1",
+                              "comctrl_sw2",
+                              "comctrl_sw3",
+                              "framegen0_primsync_on",
+                              "framegen0_primsync_off",
+                              "framegen0_secsync_on",
+                              "framegen0_secsync_off",
+                              "framegen1_primsync_on",
+                              "framegen1_primsync_off",
+                              "framegen1_secsync_on",
+                              "framegen1_secsync_off";
+        };
+
+        pixel-engine@56180800 {
+            compatible = "fsl,imx8qxp-dc-pixel-engine";
+            reg = <0x56180800 0xac00>;
+            clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+        };
+
+        display-engine@5618b400 {
+            compatible = "fsl,imx8qxp-dc-display-engine";
+            reg = <0x5618b400 0x14>, <0x5618b800 0x1c00>;
+            reg-names = "top", "cfg";
+            interrupt-parent = <&dc0_intc>;
+            interrupts = <15>, <16>, <17>;
+            interrupt-names = "shdload", "framecomplete", "seqcomplete";
+            power-domains = <&pd IMX_SC_R_DC_0_PLL_0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
deleted file mode 100644
index 3c35338a2867..000000000000
--- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
+++ /dev/null
@@ -1,162 +0,0 @@
-Freescale i.MX DRM master device
-================================
-
-The freescale i.MX DRM master device is a virtual device needed to list all
-IPU or other display interface nodes that comprise the graphics subsystem.
-
-Required properties:
-- compatible: Should be "fsl,imx-display-subsystem"
-- ports: Should contain a list of phandles pointing to display interface ports
-  of IPU devices
-
-example:
-
-display-subsystem {
-	compatible = "fsl,imx-display-subsystem";
-	ports = <&ipu_di0>;
-};
-
-
-Freescale i.MX IPUv3
-====================
-
-Required properties:
-- compatible: Should be "fsl,<chip>-ipu" where <chip> is one of
-  - imx51
-  - imx53
-  - imx6q
-  - imx6qp
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain sync interrupt and error interrupt,
-  in this order.
-- resets: phandle pointing to the system reset controller and
-          reset line index, see reset/fsl,imx-src.txt for details
-Additional required properties for fsl,imx6qp-ipu:
-- fsl,prg: phandle to prg node associated with this IPU instance
-Optional properties:
-- port@[0-3]: Port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-  Ports 0 and 1 should correspond to CSI0 and CSI1,
-  ports 2 and 3 should correspond to DI0 and DI1, respectively.
-
-example:
-
-ipu: ipu@18000000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx53-ipu";
-	reg = <0x18000000 0x080000000>;
-	interrupts = <11 10>;
-	resets = <&src 2>;
-
-	ipu_di0: port@2 {
-		reg = <2>;
-
-		ipu_di0_disp0: endpoint {
-			remote-endpoint = <&display_in>;
-		};
-	};
-};
-
-Freescale i.MX PRE (Prefetch Resolve Engine)
-============================================
-
-Required properties:
-- compatible: should be "fsl,imx6qp-pre"
-- reg: should be register base and length as documented in the
-  datasheet
-- clocks : phandle to the PRE axi clock input, as described
-  in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
-- clock-names: should be "axi"
-- interrupts: should contain the PRE interrupt
-- fsl,iram: phandle pointing to the mmio-sram device node, that should be
-  used for the PRE SRAM double buffer.
-
-example:
-
-pre@21c8000 {
-	compatible = "fsl,imx6qp-pre";
-	reg = <0x021c8000 0x1000>;
-	interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&clks IMX6QDL_CLK_PRE0>;
-	clock-names = "axi";
-	fsl,iram = <&ocram2>;
-};
-
-Freescale i.MX PRG (Prefetch Resolve Gasket)
-============================================
-
-Required properties:
-- compatible: should be "fsl,imx6qp-prg"
-- reg: should be register base and length as documented in the
-  datasheet
-- clocks : phandles to the PRG ipg and axi clock inputs, as described
-  in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
-- clock-names: should be "ipg" and "axi"
-- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
-  PRE as the first entry and the muxable PREs following.
-
-example:
-
-prg@21cc000 {
-	compatible = "fsl,imx6qp-prg";
-	reg = <0x021cc000 0x1000>;
-	clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
-		 <&clks IMX6QDL_CLK_PRG0_AXI>;
-	clock-names = "ipg", "axi";
-	fsl,pres = <&pre1>, <&pre2>, <&pre3>;
-};
-
-Parallel display support
-========================
-
-Required properties:
-- compatible: Should be "fsl,imx-parallel-display"
-Optional properties:
-- interface-pix-fmt: How this display is connected to the
-  display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
-  and "lvds666".
-- edid: verbatim EDID data block describing attached display.
-- ddc: phandle describing the i2c bus handling the display data
-  channel
-- port@[0-1]: Port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-  Port 0 is the input port connected to the IPU display interface,
-  port 1 is the output port connected to a panel.
-
-example:
-
-disp0 {
-	compatible = "fsl,imx-parallel-display";
-	edid = [edid-data];
-	interface-pix-fmt = "rgb24";
-
-	port@0 {
-		reg = <0>;
-
-		display_in: endpoint {
-			remote-endpoint = <&ipu_di0_disp0>;
-		};
-	};
-
-	port@1 {
-		reg = <1>;
-
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-panel {
-	...
-
-	port {
-		panel_in: endpoint {
-			remote-endpoint = <&display_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
deleted file mode 100644
index 8e6e7d797943..000000000000
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Device-Tree bindings for LVDS Display Bridge (ldb)
-
-LVDS Display Bridge
-===================
-
-The LVDS Display Bridge device tree node contains up to two lvds-channel
-nodes describing each of the two LVDS encoder channels of the bridge.
-
-Required properties:
- - #address-cells : should be <1>
- - #size-cells : should be <0>
- - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
-                Both LDB versions are similar, but i.MX6 has an additional
-                multiplexer in the front to select any of the four IPU display
-                interfaces as input for each LVDS channel.
- - gpr : should be <&gpr> on i.MX53 and i.MX6q.
-         The phandle points to the iomuxc-gpr region containing the LVDS
-         control register.
-- clocks, clock-names : phandles to the LDB divider and selector clocks and to
-                        the display interface selector clocks, as described in
-                        Documentation/devicetree/bindings/clock/clock-bindings.txt
-        The following clocks are expected on i.MX53:
-                "di0_pll" - LDB LVDS channel 0 mux
-                "di1_pll" - LDB LVDS channel 1 mux
-                "di0" - LDB LVDS channel 0 gate
-                "di1" - LDB LVDS channel 1 gate
-                "di0_sel" - IPU1 DI0 mux
-                "di1_sel" - IPU1 DI1 mux
-        On i.MX6q the following additional clocks are needed:
-                "di2_sel" - IPU2 DI0 mux
-                "di3_sel" - IPU2 DI1 mux
-        The needed clock numbers for each are documented in
-        Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
-        Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
-
-Optional properties:
- - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
- - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53,
-               not used on i.MX6q
- - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should
-   be configured - one input will be distributed on both outputs in dual
-   channel mode
-
-LVDS Channel
-============
-
-Each LVDS Channel has to contain either an of graph link to a panel device node
-or a display-timings node that describes the video timings for the connected
-LVDS display as well as the fsl,data-mapping and fsl,data-width properties.
-
-Required properties:
- - reg : should be <0> or <1>
- - port: Input and output port nodes with endpoint definitions as defined in
-   Documentation/devicetree/bindings/graph.txt.
-   On i.MX5, the internal two-input-multiplexer is used. Due to hardware
-   limitations, only one input port (port@[0,1]) can be used for each channel
-   (lvds-channel@[0,1], respectively).
-   On i.MX6, there should be four input ports (port@[0-3]) that correspond
-   to the four LVDS multiplexer inputs.
-   A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected
-   to a panel input port. Optionally, the output port can be left out if
-   display-timings are used instead.
-
-Optional properties (required if display-timings are used):
- - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- - display-timings : A node that describes the display timings as defined in
-   Documentation/devicetree/bindings/display/panel/display-timing.txt.
- - fsl,data-mapping : should be "spwg" or "jeida"
-                      This describes how the color bits are laid out in the
-                      serialized LVDS signal.
- - fsl,data-width : should be <18> or <24>
-
-example:
-
-gpr: iomuxc-gpr@53fa8000 {
-	/* ... */
-};
-
-ldb: ldb@53fa8008 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx53-ldb";
-	gpr = <&gpr>;
-	clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
-		 <&clks IMX5_CLK_LDB_DI1_SEL>,
-		 <&clks IMX5_CLK_IPU_DI0_SEL>,
-		 <&clks IMX5_CLK_IPU_DI1_SEL>,
-		 <&clks IMX5_CLK_LDB_DI0_GATE>,
-		 <&clks IMX5_CLK_LDB_DI1_GATE>;
-	clock-names = "di0_pll", "di1_pll",
-		      "di0_sel", "di1_sel",
-		      "di0", "di1";
-
-	/* Using an of-graph endpoint link to connect the panel */
-	lvds-channel@0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			lvds0_in: endpoint {
-				remote-endpoint = <&ipu_di0_lvds0>;
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
-			};
-		};
-	};
-
-	/* Using display-timings and fsl,data-mapping/width instead */
-	lvds-channel@1 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <1>;
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <24>;
-
-		display-timings {
-			/* ... */
-		};
-
-		port@1 {
-			reg = <1>;
-
-			lvds1_in: endpoint {
-				remote-endpoint = <&ipu_di1_lvds1>;
-			};
-		};
-	};
-};
-
-panel: lvds-panel {
-	/* ... */
-
-	port {
-		panel_in: endpoint {
-			remote-endpoint = <&lvds0_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
index 0091df9dd73b..4ae6328cde64 100644
--- a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
+++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 NXP
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: iMX8MQ Display Controller Subsystem (DCSS)
 
@@ -105,4 +105,3 @@ examples:
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
index 3f93def2c5a2..319bd7c88fe3 100644
--- a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
+++ b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/ingenic,ipu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs Image Processing Unit (IPU) devicetree bindings
+title: Ingenic SoCs Image Processing Unit (IPU)
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
index 0049010b37ca..6d4c00f3fcc8 100644
--- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
+++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/ingenic,lcd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs LCD controller devicetree bindings
+title: Ingenic SoCs LCD controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
@@ -17,6 +17,8 @@ properties:
     enum:
       - ingenic,jz4740-lcd
       - ingenic,jz4725b-lcd
+      - ingenic,jz4760-lcd
+      - ingenic,jz4760b-lcd
       - ingenic,jz4770-lcd
       - ingenic,jz4780-lcd
 
diff --git a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
index bc6622b010ca..2cf54ecc707a 100644
--- a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
+++ b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/intel,keembay-display.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for Intel Keem Bay display controller
+title: Intel Keem Bay display controller
 
 maintainers:
   - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
diff --git a/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml b/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml
index a222b52d8b8f..cc7e1f318fe4 100644
--- a/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml
+++ b/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/intel,keembay-msscam.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for Intel Keem Bay MSSCAM
+title: Intel Keem Bay MSSCAM
 
 maintainers:
   - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
diff --git a/Documentation/devicetree/bindings/display/lvds-data-mapping.yaml b/Documentation/devicetree/bindings/display/lvds-data-mapping.yaml
new file mode 100644
index 000000000000..ab842594feb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/lvds-data-mapping.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/lvds-data-mapping.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LVDS Data Mapping
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |
+  LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
+  incompatible data link layers have been used over time to transmit image data
+  to LVDS devices. This bindings supports devices compatible with the following
+  specifications.
+
+  [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
+  1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
+  [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
+  Semiconductor
+  [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
+  Electronics Standards Association (VESA)
+
+  Device compatible with those specifications have been marketed under the
+  FPD-Link and FlatLink brands.
+
+  This bindings also supports 30-bit data mapping compatible with JEIDA and
+  VESA.
+
+properties:
+  data-mapping:
+    enum:
+      - jeida-18
+      - jeida-24
+      - jeida-30
+      - vesa-24
+      - vesa-30
+    description: |
+      The color signals mapping order.
+
+      LVDS data mappings are defined as follows.
+
+      - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
+        [VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
+
+      Slot          0       1       2       3       4       5       6
+                ________________                         _________________
+      Clock                     \_______________________/
+                  ______  ______  ______  ______  ______  ______  ______
+      DATA0     ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+      DATA1     ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+
+      - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
+        specifications. Data are transferred as follows on 4 LVDS lanes.
+
+      Slot          0       1       2       3       4       5       6
+                ________________                         _________________
+      Clock                     \_______________________/
+                  ______  ______  ______  ______  ______  ______  ______
+      DATA0     ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
+      DATA1     ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
+      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
+      DATA3     ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
+
+      - "jeida-30" - 30-bit data mapping compatible with JEIDA and VESA. Data
+        are transferred as follows on 5 LVDS lanes.
+
+      Slot          0       1       2       3       4       5       6
+                ________________                         _________________
+      Clock                     \_______________________/
+                  ______  ______  ______  ______  ______  ______  ______
+      DATA0     ><__G4__><__R9__><__R8__><__R7__><__R6__><__R5__><__R4__><
+      DATA1     ><__B5__><__B4__><__G9__><__G8__><__G7__><__G6__><__G5__><
+      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B9__><__B8__><__B7__><__B6__><
+      DATA3     ><_CTL3_><__B3__><__B2__><__G3__><__G2__><__R3__><__R2__><
+      DATA4     ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
+
+      - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
+        Data are transferred as follows on 4 LVDS lanes.
+
+      Slot          0       1       2       3       4       5       6
+                ________________                         _________________
+      Clock                     \_______________________/
+                  ______  ______  ______  ______  ______  ______  ______
+      DATA0     ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+      DATA1     ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+      DATA3     ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
+
+      - "vesa-30" - 30-bit data mapping compatible with VESA. Data are
+        transferred as follows on 5 LVDS lanes.
+
+      Slot          0       1       2       3       4       5       6
+                ________________                         _________________
+      Clock                     \_______________________/
+                  ______  ______  ______  ______  ______  ______  ______
+      DATA0     ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
+      DATA1     ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
+      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
+      DATA3     ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
+      DATA4     ><_CTL3_><__B9__><__B8__><__G9__><__G8__><__R9__><__R8__><
+
+      Control signals are mapped as follows.
+
+      CTL0: HSync
+      CTL1: VSync
+      CTL2: Data Enable
+      CTL3: 0
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/display/lvds-dual-ports.yaml b/Documentation/devicetree/bindings/display/lvds-dual-ports.yaml
new file mode 100644
index 000000000000..785701fe1590
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/lvds-dual-ports.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/lvds-dual-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dual-link LVDS Display Common Properties
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  Common properties for LVDS displays with dual LVDS links. Extend LVDS display
+  common properties defined in lvds.yaml.
+
+  Dual-link LVDS displays receive odd pixels and even pixels separately from
+  the dual LVDS links. One link receives odd pixels and the other receives
+  even pixels. Some of those displays may also use only one LVDS link to
+  receive all pixels, being odd and even agnostic.
+
+allOf:
+  - $ref: lvds.yaml#
+
+properties:
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@[01]$':
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          port@0 represents the first LVDS input link.
+          port@1 represents the second LVDS input link.
+
+        properties:
+          dual-lvds-odd-pixels:
+            type: boolean
+            description: LVDS input link for odd pixels
+
+          dual-lvds-even-pixels:
+            type: boolean
+            description: LVDS input link for even pixels
+
+        oneOf:
+          - required: [dual-lvds-odd-pixels]
+          - required: [dual-lvds-even-pixels]
+          - properties:
+              dual-lvds-odd-pixels: false
+              dual-lvds-even-pixels: false
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+required:
+  - ports
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/display/lvds.yaml b/Documentation/devicetree/bindings/display/lvds.yaml
new file mode 100644
index 000000000000..b74efbea3be2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/lvds.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LVDS Display Common Properties
+
+allOf:
+  - $ref: lvds-data-mapping.yaml#
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description:
+  This binding extends the data mapping defined in lvds-data-mapping.yaml.
+  It supports reversing the bit order on the formats defined there in order
+  to accommodate for even more specialized data formats, since a variety of
+  data formats and layouts is used to drive LVDS displays.
+
+properties:
+  data-mirror:
+    type: boolean
+    description:
+      If set, reverse the bit order described in the data mappings on all
+      data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml b/Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
new file mode 100644
index 000000000000..cd27f8ba5ae1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mayqueen,pixpaper.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mayqueen,pixpaper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mayqueen Pixpaper e-ink display panel
+
+maintainers:
+  - LiangCheng Wang <zaq14760@gmail.com>
+
+description:
+  The Pixpaper is an e-ink display panel controlled via an SPI interface.
+  The panel has a resolution of 122x250 pixels and requires GPIO pins for
+  reset, busy, and data/command control.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: mayqueen,pixpaper
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+    default: 1000000
+
+  reset-gpios:
+    maxItems: 1
+
+  busy-gpios:
+    maxItems: 1
+
+  dc-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - busy-gpios
+  - dc-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        display@0 {
+            compatible = "mayqueen,pixpaper";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            reset-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+            busy-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+            dc-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
new file mode 100644
index 000000000000..daf90ebb39bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,aal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display adaptive ambient light processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display adaptive ambient light processor, namely AAL,
+  is responsible for backlight power saving and sunlight visibility improving.
+  AAL device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-aal
+          - mediatek,mt8183-disp-aal
+          - mediatek,mt8195-mdp3-aal
+      - items:
+          - enum:
+              - mediatek,mt8188-mdp3-aal
+          - const: mediatek,mt8195-mdp3-aal
+      - items:
+          - enum:
+              - mediatek,mt2712-disp-aal
+              - mediatek,mt6795-disp-aal
+          - const: mediatek,mt8173-disp-aal
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-aal
+              - mediatek,mt8188-disp-aal
+              - mediatek,mt8192-disp-aal
+              - mediatek,mt8195-disp-aal
+              - mediatek,mt8365-disp-aal
+          - const: mediatek,mt8183-disp-aal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: AAL Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: AAL input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          AAL output to the next component's input, for example could be one
+          of many gamma, overdrive or other blocks.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aal@14015000 {
+            compatible = "mediatek,mt8173-disp-aal";
+            reg = <0 0x14015000 0 0x1000>;
+            interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_AAL>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                        remote-endpoint = <&ccorr0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&gamma0_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
new file mode 100644
index 000000000000..fca8e7bb0cbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color correction
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display color correction, namely CCORR, reproduces correct color
+  on panels with different color gamut.
+  CCORR device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-disp-ccorr
+          - mediatek,mt8192-disp-ccorr
+      - items:
+          - const: mediatek,mt8365-disp-ccorr
+          - const: mediatek,mt8183-disp-ccorr
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ccorr
+              - mediatek,mt8188-disp-ccorr
+              - mediatek,mt8195-disp-ccorr
+          - const: mediatek,mt8192-disp-ccorr
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: CCORR Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CCORR input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          CCORR output to the input of the next desired component in the
+          display pipeline, usually only one of the available AAL blocks.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ccorr0: ccorr@1400f000 {
+            compatible = "mediatek,mt8183-disp-ccorr";
+            reg = <0 0x1400f000 0 0x1000>;
+            interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
index 66288b9f0aa6..080cf321209e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,cec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek HDMI CEC Controller Device Tree Bindings
+title: Mediatek HDMI CEC Controller
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
new file mode 100644
index 000000000000..5564f4063317
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,color.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display color processor, namely COLOR, provides hue, luma and
+  saturation adjustments to get better picture quality and to have one panel
+  resemble the other in their output characteristics.
+  COLOR device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-color
+          - mediatek,mt8167-disp-color
+          - mediatek,mt8173-disp-color
+          - mediatek,mt8195-mdp3-color
+      - items:
+          - enum:
+              - mediatek,mt8188-mdp3-color
+          - const: mediatek,mt8195-mdp3-color
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-color
+              - mediatek,mt2712-disp-color
+          - const: mediatek,mt2701-disp-color
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-color
+              - mediatek,mt8183-disp-color
+              - mediatek,mt8186-disp-color
+              - mediatek,mt8188-disp-color
+              - mediatek,mt8192-disp-color
+              - mediatek,mt8195-disp-color
+              - mediatek,mt8365-disp-color
+          - const: mediatek,mt8173-disp-color
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: COLOR Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: COLOR input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          COLOR output to the input of the next desired component in the
+          display pipeline, for example one of the available CCORR or AAL
+          blocks.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        color0: color@14013000 {
+            compatible = "mediatek,mt8173-disp-color";
+            reg = <0 0x14013000 0 0x1000>;
+            interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
deleted file mode 100644
index 78044c340e20..000000000000
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ /dev/null
@@ -1,219 +0,0 @@
-Mediatek display subsystem
-==========================
-
-The Mediatek display subsystem consists of various DISP function blocks in the
-MMSYS register space. The connections between them can be configured by output
-and input selectors in the MMSYS_CONFIG register space. Pixel clock and start
-of frame signal are distributed to the other function blocks by a DISP_MUTEX
-function block.
-
-All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node.
-For a description of the MMSYS_CONFIG binding, see
-Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml.
-
-DISP function blocks
-====================
-
-A display stream starts at a source function block that reads pixel data from
-memory and ends with a sink function block that drives pixels on a display
-interface, or writes pixels back to memory. All DISP function blocks have
-their own register space, interrupt, and clock gate. The blocks that can
-access memory additionally have to list the IOMMU and local arbiter they are
-connected to.
-
-For a description of the display interface sink function blocks, see
-Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and
-Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml.
-
-Required properties (all function blocks):
-- compatible: "mediatek,<chip>-disp-<function>", one of
-	"mediatek,<chip>-disp-ovl"   		- overlay (4 layers, blending, csc)
-	"mediatek,<chip>-disp-ovl-2l"           - overlay (2 layers, blending, csc)
-	"mediatek,<chip>-disp-rdma"  		- read DMA / line buffer
-	"mediatek,<chip>-disp-wdma"  		- write DMA
-	"mediatek,<chip>-disp-ccorr"            - color correction
-	"mediatek,<chip>-disp-color" 		- color processor
-	"mediatek,<chip>-disp-dither"           - dither
-	"mediatek,<chip>-disp-aal"   		- adaptive ambient light controller
-	"mediatek,<chip>-disp-gamma" 		- gamma correction
-	"mediatek,<chip>-disp-merge" 		- merge streams from two RDMA sources
-	"mediatek,<chip>-disp-postmask" 	- control round corner for display frame
-	"mediatek,<chip>-disp-split" 		- split stream to two encoders
-	"mediatek,<chip>-disp-ufoe"  		- data compression engine
-	"mediatek,<chip>-dsi"        		- DSI controller, see mediatek,dsi.txt
-	"mediatek,<chip>-dpi"        		- DPI controller, see mediatek,dpi.txt
-	"mediatek,<chip>-disp-mutex" 		- display mutex
-	"mediatek,<chip>-disp-od"    		- overdrive
-  the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173, mt8183 and mt8192.
-- reg: Physical base address and length of the function block register space
-- interrupts: The interrupt signal from the function block (required, except for
-  merge and split function blocks).
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-  For most function blocks this is just a single clock input. Only the DSI and
-  DPI controller nodes have multiple clock inputs. These are documented in
-  mediatek,dsi.txt and mediatek,dpi.txt, respectively.
-  An exception is that the mt8183 mutex is always free running with no clocks property.
-
-Required properties (DMA function blocks):
-- compatible: Should be one of
-	"mediatek,<chip>-disp-ovl"
-	"mediatek,<chip>-disp-rdma"
-	"mediatek,<chip>-disp-wdma"
-  the supported chips are mt2701, mt8167 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-- iommus: Should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-
-Optional properties (RDMA function blocks):
-- mediatek,rdma-fifo-size: rdma fifo size may be different even in same SOC, add this
-  property to the corresponding rdma
-  the value is the Max value which defined in hardware data sheet.
-  mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
-  mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
-  mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
-
-Examples:
-
-mmsys: clock-controller@14000000 {
-	compatible = "mediatek,mt8173-mmsys", "syscon";
-	reg = <0 0x14000000 0 0x1000>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	#clock-cells = <1>;
-};
-
-ovl0: ovl@1400c000 {
-	compatible = "mediatek,mt8173-disp-ovl";
-	reg = <0 0x1400c000 0 0x1000>;
-	interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OVL0>;
-	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
-};
-
-ovl1: ovl@1400d000 {
-	compatible = "mediatek,mt8173-disp-ovl";
-	reg = <0 0x1400d000 0 0x1000>;
-	interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OVL1>;
-	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
-};
-
-rdma0: rdma@1400e000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x1400e000 0 0x1000>;
-	interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
-	mediatek,rdma-fifosize = <8192>;
-};
-
-rdma1: rdma@1400f000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x1400f000 0 0x1000>;
-	interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
-};
-
-rdma2: rdma@14010000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x14010000 0 0x1000>;
-	interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
-};
-
-wdma0: wdma@14011000 {
-	compatible = "mediatek,mt8173-disp-wdma";
-	reg = <0 0x14011000 0 0x1000>;
-	interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
-	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
-};
-
-wdma1: wdma@14012000 {
-	compatible = "mediatek,mt8173-disp-wdma";
-	reg = <0 0x14012000 0 0x1000>;
-	interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
-	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
-};
-
-color0: color@14013000 {
-	compatible = "mediatek,mt8173-disp-color";
-	reg = <0 0x14013000 0 0x1000>;
-	interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_COLOR0>;
-};
-
-color1: color@14014000 {
-	compatible = "mediatek,mt8173-disp-color";
-	reg = <0 0x14014000 0 0x1000>;
-	interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_COLOR1>;
-};
-
-aal@14015000 {
-	compatible = "mediatek,mt8173-disp-aal";
-	reg = <0 0x14015000 0 0x1000>;
-	interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_AAL>;
-};
-
-gamma@14016000 {
-	compatible = "mediatek,mt8173-disp-gamma";
-	reg = <0 0x14016000 0 0x1000>;
-	interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_GAMMA>;
-};
-
-ufoe@1401a000 {
-	compatible = "mediatek,mt8173-disp-ufoe";
-	reg = <0 0x1401a000 0 0x1000>;
-	interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_UFOE>;
-};
-
-dsi0: dsi@1401b000 {
-	/* See mediatek,dsi.txt for details */
-};
-
-dpi0: dpi@1401d000 {
-	/* See mediatek,dpi.txt for details */
-};
-
-mutex: mutex@14020000 {
-	compatible = "mediatek,mt8173-disp-mutex";
-	reg = <0 0x14020000 0 0x1000>;
-	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_MUTEX_32K>;
-};
-
-od@14023000 {
-	compatible = "mediatek,mt8173-disp-od";
-	reg = <0 0x14023000 0 0x1000>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OD>;
-};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
new file mode 100644
index 000000000000..abaf27916d13
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dither.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display dither processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display dither processor, namely DITHER, works by approximating
+  unavailable colors with available colors and by mixing and matching available
+  colors to mimic unavailable ones.
+  DITHER device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-disp-dither
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-dither
+              - mediatek,mt8188-disp-dither
+              - mediatek,mt8192-disp-dither
+              - mediatek,mt8195-disp-dither
+              - mediatek,mt8365-disp-dither
+          - const: mediatek,mt8183-disp-dither
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: DITHER Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DITHER input, usually from a POSTMASK or GAMMA block.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DITHER output to the input of the next desired component in the
+          display pipeline, for example one of the available DSC compressors,
+          DP_INTF, DSI, LVDS or others.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dither0: dither@14012000 {
+            compatible = "mediatek,mt8183-disp-dither";
+            reg = <0 0x14012000 0 0x1000>;
+            interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
new file mode 100644
index 000000000000..274f590807ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Port Controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  MediaTek DP and eDP are different hardwares and there are some features
+  which are not supported for eDP. For example, audio is not supported for
+  eDP. Therefore, we need to use two different compatibles to describe them.
+  In addition, We just need to enable the power domain of DP, so the clock
+  of DP is generated by itself and we are not using other PLL to generate
+  clocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8188-dp-tx
+      - mediatek,mt8188-edp-tx
+      - mediatek,mt8195-dp-tx
+      - mediatek,mt8195-edp-tx
+
+  reg:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 1
+    description: efuse data for display port calibration
+
+  nvmem-cell-names:
+    const: dp_calibration_data
+
+  power-domains:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the controller, usually dp_intf
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output endpoint of the controller
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                description: |
+                  number of lanes supported by the hardware.
+                  The possible values:
+                  0       - For 1 lane enabled in IP.
+                  0 1     - For 2 lanes enabled in IP.
+                  0 1 2 3 - For 4 lanes enabled in IP.
+                minItems: 1
+                maxItems: 4
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+  max-linkrate-mhz:
+    enum: [ 1620, 2700, 5400, 8100 ]
+    description: maximum link rate supported by the hardware.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ports
+  - max-linkrate-mhz
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - mediatek,mt8188-dp-tx
+                - mediatek,mt8195-dp-tx
+    then:
+      properties:
+        '#sound-dai-cells': false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    dptx@1c600000 {
+        compatible = "mediatek,mt8195-dp-tx";
+        reg = <0x1c600000 0x8000>;
+        power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+        interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+        max-linkrate-mhz = <8100>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dptx_in: endpoint {
+                    remote-endpoint = <&dp_intf0_out>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                dptx_out: endpoint {
+                    data-lanes = <0 1 2 3>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index dd2896a40ff0..eb4f276e8dc4 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -4,25 +4,42 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: mediatek DPI Controller Device Tree Bindings
+title: MediaTek DPI and DP_INTF Controller
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
   - Jitao shi <jitao.shi@mediatek.com>
 
 description: |
-  The Mediatek DPI function block is a sink of the display subsystem and
-  provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
-  output bus.
+  The MediaTek DPI and DP_INTF function blocks are a sink of the display
+  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
+  parallel output bus.
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt2701-dpi
-      - mediatek,mt7623-dpi
-      - mediatek,mt8173-dpi
-      - mediatek,mt8183-dpi
-      - mediatek,mt8192-dpi
+    oneOf:
+      - enum:
+          - mediatek,mt2701-dpi
+          - mediatek,mt7623-dpi
+          - mediatek,mt8173-dpi
+          - mediatek,mt8183-dpi
+          - mediatek,mt8186-dpi
+          - mediatek,mt8188-dp-intf
+          - mediatek,mt8192-dpi
+          - mediatek,mt8195-dp-intf
+          - mediatek,mt8195-dpi
+      - items:
+          - enum:
+              - mediatek,mt6795-dpi
+          - const: mediatek,mt8183-dpi
+      - items:
+          - enum:
+              - mediatek,mt8365-dpi
+          - const: mediatek,mt8192-dpi
+      - items:
+          - enum:
+              - mediatek,mt8188-dpi
+          - const: mediatek,mt8195-dpi
 
   reg:
     maxItems: 1
@@ -50,11 +67,47 @@ properties:
       - const: default
       - const: sleep
 
+  power-domains:
+    description: |
+      The MediaTek DPI module is typically associated with one of the
+      following multimedia power domains:
+        POWER_DOMAIN_DISPLAY
+        POWER_DOMAIN_VDOSYS
+        POWER_DOMAIN_MM
+      The specific power domain used varies depending on the SoC design.
+
+      It is recommended to explicitly add the appropriate power domain
+      property to the DPI node in the device tree.
+    maxItems: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description:
       Output port node. This port should be connected to the input port of an
-      attached HDMI or LVDS encoder chip.
+      attached HDMI, LVDS or DisplayPort encoder chip.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DPI input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DPI output to an HDMI, LVDS or DisplayPort encoder input
+
+    required:
+      - port@0
+      - port@1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: dpi
 
 required:
   - compatible
@@ -62,7 +115,12 @@ required:
   - interrupts
   - clocks
   - clock-names
-  - port
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
 
 additionalProperties: false
 
@@ -70,12 +128,13 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/mt8173-clk.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
-    dpi0: dpi@1401d000 {
+    #include <dt-bindings/power/mt8173-power.h>
+
+    dpi: dpi@1401d000 {
         compatible = "mediatek,mt8173-dpi";
         reg = <0x1401d000 0x1000>;
         interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+        power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
         clocks = <&mmsys CLK_MM_DPI_PIXEL>,
              <&mmsys CLK_MM_DPI_ENGINE>,
              <&apmixedsys CLK_APMIXED_TVDPLL>;
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
new file mode 100644
index 000000000000..a5b88eb97e3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: mediatek display DSC controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The DSC standard is a specification of the algorithms used for
+  compressing and decompressing image display streams, including
+  the specification of the syntax and semantics of the compressed
+  video bit stream. DSC is designed for real-time systems with
+  real-time compression, transmission, decompression and Display.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8195-disp-dsc
+      - items:
+          - const: mediatek,mt8188-disp-dsc
+          - const: mediatek,mt8195-disp-dsc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: DSC Wrapper Clock
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  mediatek,gce-client-reg:
+    description:
+      The register of client driver can be configured by gce with 4 arguments
+      defined in this property, such as phandle of gce, subsys id,
+      register offset and size.
+      Each subsys id is mapping to a base address of display function blocks
+      register which is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Display Stream Compression input, usually from one of the DITHER
+          or MERGE blocks.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Display Stream Compression output to the input of the next desired
+          component in the display pipeline, for example to MERGE, DP_INTF,
+          DPI or DSI.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsc0: disp_dsc_wrap@1c009000 {
+            compatible = "mediatek,mt8195-disp-dsc";
+            reg = <0 0x1c009000 0 0x1000>;
+            interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+            clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+            mediatek,gce-client-reg = <&gce1 SUBSYS_1c00XXXX 0x9000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
deleted file mode 100644
index 36b01458f45c..000000000000
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Mediatek DSI Device
-===================
-
-The Mediatek DSI function block is a sink of the display subsystem and can
-drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
-channel output.
-
-Required properties:
-- compatible: "mediatek,<chip>-dsi"
-- the supported chips are mt2701, mt7623, mt8167, mt8173 and mt8183.
-- reg: Physical base address and length of the controller's registers
-- interrupts: The interrupt signal from the function block.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "engine", "digital", and "hs"
-- phys: phandle link to the MIPI D-PHY controller.
-- phy-names: must contain "dphy"
-- port: Output port node with endpoint definitions as described in
-  Documentation/devicetree/bindings/graph.txt. This port should be connected
-  to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
-
-Optional properties:
-- resets: list of phandle + reset specifier pair, as described in [1].
-
-[1] Documentation/devicetree/bindings/reset/reset.txt
-
-MIPI TX Configuration Module
-============================
-
-See phy/mediatek,dsi-phy.yaml
-
-Example:
-
-mipi_tx0: mipi-dphy@10215000 {
-	compatible = "mediatek,mt8173-mipi-tx";
-	reg = <0 0x10215000 0 0x1000>;
-	clocks = <&clk26m>;
-	clock-output-names = "mipi_tx0_pll";
-	#clock-cells = <0>;
-	#phy-cells = <0>;
-	drive-strength-microamp = <4600>;
-	nvmem-cells= <&mipi_tx_calibration>;
-	nvmem-cell-names = "calibration-data";
-};
-
-dsi0: dsi@1401b000 {
-	compatible = "mediatek,mt8173-dsi";
-	reg = <0 0x1401b000 0 0x1000>;
-	interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
-		 <&mipi_tx0>;
-	clock-names = "engine", "digital", "hs";
-	resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
-	phys = <&mipi_tx0>;
-	phy-names = "dphy";
-
-	port {
-		dsi0_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
new file mode 100644
index 000000000000..27ffbccc2a08
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DSI Controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Jitao Shi <jitao.shi@mediatek.com>
+
+description: |
+  The MediaTek DSI function block is a sink of the display subsystem and can
+  drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
+  channel output.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-dsi
+          - mediatek,mt7623-dsi
+          - mediatek,mt8167-dsi
+          - mediatek,mt8173-dsi
+          - mediatek,mt8183-dsi
+          - mediatek,mt8186-dsi
+          - mediatek,mt8188-dsi
+      - items:
+          - enum:
+              - mediatek,mt6795-dsi
+          - const: mediatek,mt8173-dsi
+      - items:
+          - enum:
+              - mediatek,mt8195-dsi
+              - mediatek,mt8365-dsi
+          - const: mediatek,mt8183-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Engine Clock
+      - description: Digital Clock
+      - description: HS Clock
+
+  clock-names:
+    items:
+      - const: engine
+      - const: digital
+      - const: hs
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dphy
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Output port node. This port should be connected to the input
+      port of an attached DSI panel or DSI-to-eDP encoder chip.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input ports can have multiple endpoints, each of those connects
+      to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI input port, usually from DITHER, DSC or MERGE
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DSI output to an attached DSI panel, or a DSI-to-X encoder chip
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/mt8183-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi0: dsi@14014000 {
+            compatible = "mediatek,mt8183-dsi";
+            reg = <0 0x14014000 0 0x1000>;
+            interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DSI0_MM>,
+                <&mmsys CLK_MM_DSI0_IF>,
+                <&mipi_tx0>;
+            clock-names = "engine", "digital", "hs";
+            resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
+            phys = <&mipi_tx0>;
+            phy-names = "dphy";
+            port {
+                dsi0_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
new file mode 100644
index 000000000000..98db47894eeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ethdr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Ethdr Device
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  ETHDR (ET High Dynamic Range) is a MediaTek internal HDR engine and is
+  designed for HDR video and graphics conversion in the external display path.
+  It handles multiple HDR input types and performs tone mapping, color
+  space/color format conversion, and then combine different layers,
+  output the required HDR or SDR signal to the subsequent display path.
+  This engine is composed of two video frontends, two graphic frontends,
+  one video backend and a mixer. ETHDR has two DMA function blocks, DS and ADL.
+  These two function blocks read the pre-programmed registers from DRAM and
+  set them to HW in the v-blanking period.
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt8195-disp-ethdr
+      - items:
+          - const: mediatek,mt8188-disp-ethdr
+          - const: mediatek,mt8195-disp-ethdr
+
+  reg:
+    maxItems: 7
+
+  reg-names:
+    items:
+      - const: mixer
+      - const: vdo_fe0
+      - const: vdo_fe1
+      - const: gfx_fe0
+      - const: gfx_fe1
+      - const: vdo_be
+      - const: adl_ds
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: mixer clock
+      - description: video frontend 0 clock
+      - description: video frontend 1 clock
+      - description: graphic frontend 0 clock
+      - description: graphic frontend 1 clock
+      - description: video backend clock
+      - description: autodownload and menuload clock
+      - description: video frontend 0 async clock
+      - description: video frontend 1 async clock
+      - description: graphic frontend 0 async clock
+      - description: graphic frontend 1 async clock
+      - description: video backend async clock
+      - description: ethdr top clock
+
+  clock-names:
+    items:
+      - const: mixer
+      - const: vdo_fe0
+      - const: vdo_fe1
+      - const: gfx_fe0
+      - const: gfx_fe1
+      - const: vdo_be
+      - const: adl_ds
+      - const: vdo_fe0_async
+      - const: vdo_fe1_async
+      - const: gfx_fe0_async
+      - const: gfx_fe1_async
+      - const: vdo_be_async
+      - const: ethdr_top
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: video frontend 0 async reset
+      - description: video frontend 1 async reset
+      - description: graphic frontend 0 async reset
+      - description: graphic frontend 1 async reset
+      - description: video backend async reset
+
+  reset-names:
+    items:
+      - const: vdo_fe0_async
+      - const: vdo_fe1_async
+      - const: gfx_fe0_async
+      - const: gfx_fe1_async
+      - const: vdo_be_async
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 7
+    description: The register of display function block to be set by gce.
+      There are 4 arguments in this property, gce node, subsys id, offset and
+      register size. The subsys id is defined in the gce header of each chips
+      include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display
+      function block.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: ETHDR input, usually from one of the MERGE blocks.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          ETHDR output to the input of the next desired component in the
+          display pipeline, for example one of the available MERGE blocks,
+          or others.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - resets
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/reset/mt8195-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        hdr-engine@1c114000 {
+                compatible = "mediatek,mt8195-disp-ethdr";
+                reg = <0 0x1c114000 0 0x1000>,
+                      <0 0x1c115000 0 0x1000>,
+                      <0 0x1c117000 0 0x1000>,
+                      <0 0x1c119000 0 0x1000>,
+                      <0 0x1c11a000 0 0x1000>,
+                      <0 0x1c11b000 0 0x1000>,
+                      <0 0x1c11c000 0 0x1000>;
+                reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+                            "vdo_be", "adl_ds";
+                mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+                clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+                         <&vdosys1 CLK_VDO1_26M_SLOW>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+                         <&topckgen CLK_TOP_ETHDR>;
+                clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+                              "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+                              "gfx_fe0_async", "gfx_fe1_async","vdo_be_async",
+                              "ethdr_top";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+                iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
+                         <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
+                interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */
+                resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
+                reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async",
+                              "gfx_fe1_async", "vdo_be_async";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
new file mode 100644
index 000000000000..48542dc7e784
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,gamma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display gamma correction
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display gamma correction, namely GAMMA, provides a nonlinear
+  operation used to adjust luminance in display system.
+  GAMMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-gamma
+          - mediatek,mt8183-disp-gamma
+          - mediatek,mt8195-disp-gamma
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-gamma
+          - const: mediatek,mt8173-disp-gamma
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-gamma
+              - mediatek,mt8188-disp-gamma
+              - mediatek,mt8192-disp-gamma
+              - mediatek,mt8195-disp-gamma
+              - mediatek,mt8365-disp-gamma
+          - const: mediatek,mt8183-disp-gamma
+      - items:
+          - enum:
+              - mediatek,mt8188-disp-gamma
+          - const: mediatek,mt8195-disp-gamma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: GAMMA Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GAMMA input, usually from one of the AAL blocks.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          GAMMA output to the input of the next desired component in the
+          display pipeline, for example one of the available DITHER or
+          POSTMASK blocks.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gamma@14016000 {
+            compatible = "mediatek,mt8173-disp-gamma";
+            reg = <0 0x14016000 0 0x1000>;
+            interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml
index b6fcdfb99ab2..bd8f7b8ae0ff 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi-ddc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek HDMI DDC Device Tree Bindings
+title: Mediatek HDMI DDC
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
index 111967efa999..b90b6d18a828 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek HDMI Encoder Device Tree Bindings
+title: Mediatek HDMI Encoder
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
@@ -50,8 +50,11 @@ properties:
       - const: hdmi
 
   mediatek,syscon-hdmi:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to system configuration registers
+          - description: register offset in the system configuration registers
     description: |
       phandle link and register offset to the system configuration registers.
 
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
new file mode 100644
index 000000000000..3798a25402d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,merge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display merge
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display merge, namely MERGE, is used to merge two slice-per-line
+  inputs into one side-by-side output.
+  MERGE device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-merge
+          - mediatek,mt8195-disp-merge
+          - mediatek,mt8195-mdp3-merge
+      - items:
+          - enum:
+              - mediatek,mt8188-mdp3-merge
+          - const: mediatek,mt8195-mdp3-merge
+      - items:
+          - const: mediatek,mt6795-disp-merge
+          - const: mediatek,mt8173-disp-merge
+      - items:
+          - const: mediatek,mt8188-disp-merge
+          - const: mediatek,mt8195-disp-merge
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: merge
+      - items:
+          - const: merge
+          - const: merge_async
+
+  mediatek,merge-fifo-en:
+    description:
+      The setting of merge fifo is mainly provided for the display latency
+      buffer to ensure that the back-end panel display data will not be
+      underrun, a little more data is needed in the fifo.
+      According to the merge fifo settings, when the water level is detected
+      to be insufficient, it will trigger RDMA sending ultra and preulra
+      command to SMI to speed up the data rate.
+    type: boolean
+
+  mediatek,merge-mute:
+    description: Support mute function. Mute the content of merge output.
+    type: boolean
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          MERGE input port, usually from DITHER, DPI, DSC, DSI, MDP_RDMA,
+          ETHDR or even from a different MERGE block
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          MERGE output to a DSC, DPI, DP_INTF, DSI, ETHDR, Write DMA, or
+          a different MERGE block, or others.
+
+    required:
+      - port@0
+      - port@1
+
+  resets:
+    description: reset controller
+      See Documentation/devicetree/bindings/reset/reset.txt for details.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        merge@14017000 {
+            compatible = "mediatek,mt8173-disp-merge";
+            reg = <0 0x14017000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_MERGE>;
+            clock-names = "merge";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
new file mode 100644
index 000000000000..bde4dc556d4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek HDMI MT8195 series HDMI Display Data Channel (DDC)
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - CK Hu <ck.hu@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt8195-hdmi-ddc
+      - items:
+          - const: mediatek,mt8188-hdmi-ddc
+          - const: mediatek,mt8195-hdmi-ddc
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi {
+        hdmi_ddc: i2c {
+            compatible = "mediatek,mt8195-hdmi-ddc";
+            clocks = <&clk26m>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml
new file mode 100644
index 000000000000..1b382f99d3ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8195 series HDMI-TX Encoder
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - CK Hu <ck.hu@mediatek.com>
+
+description:
+  The MediaTek HDMI-TX v2 encoder can generate HDMI format data based on
+  the HDMI Specification 2.0b.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8188-hdmi-tx
+      - mediatek,mt8195-hdmi-tx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: HDMI Peripheral Bus (APB) clock
+      - description: HDCP and HDMI_TOP clock
+      - description: HDCP, HDMI_TOP and HDMI Audio reference clock
+      - description: VPP HDMI Split clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: hdcp
+      - const: hdcp24m
+      - const: hdmi-split
+
+  i2c:
+    type: object
+    $ref: /schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
+    unevaluatedProperties: false
+    description: HDMI DDC I2C controller
+
+  phys:
+    maxItems: 1
+    description: PHY providing clocking TMDS and pixel to controller
+
+  phy-names:
+    items:
+      - const: hdmi
+
+  power-domains:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port, usually connected to the output port of a DPI
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port that must be connected either to the input port of
+          a HDMI connector node containing a ddc-i2c-bus, or to the input
+          port of an attached bridge chip, such as a SlimPort transmitter.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - phys
+  - phy-names
+  - ports
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        hdmi@1c300000 {
+            compatible = "mediatek,mt8195-hdmi-tx";
+            reg = <0 0x1c300000 0 0x1000>;
+            clocks = <&topckgen CLK_TOP_HDMI_APB>,
+                     <&topckgen CLK_TOP_HDCP>,
+                     <&topckgen CLK_TOP_HDCP_24M>,
+                     <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>;
+            clock-names = "bus", "hdcp", "hdcp24m", "hdmi-split";
+            interrupts = <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>;
+            phys = <&hdmi_phy>;
+            phy-names = "hdmi";
+            power-domains = <&spm MT8195_POWER_DOMAIN_HDMI_TX>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&hdmi_pins>;
+            #sound-dai-cells = <1>;
+
+            hdmitx_ddc: i2c {
+                compatible = "mediatek,mt8195-hdmi-ddc";
+                clocks = <&clk26m>;
+            };
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    hdmi_in: endpoint {
+                        remote-endpoint = <&dpi1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    hdmi_out: endpoint {
+                        remote-endpoint = <&hdmi_connector_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
new file mode 100644
index 000000000000..930c088a722a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,od.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overdirve
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overdrive, namely OD, increases the transition values
+  of pixels between consecutive frames to make LCD rotate faster.
+  OD device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2712-disp-od
+          - mediatek,mt8173-disp-od
+      - items:
+          - const: mediatek,mt6795-disp-od
+          - const: mediatek,mt8173-disp-od
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: OD Clock
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: OD input port, usually from an AAL block
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          OD output to the input of the next desired component in the
+          display pipeline, for example one of the available RDMA or
+          other blocks.
+
+    required:
+      - port@0
+      - port@1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: describes how to locate the GCE client register
+    items:
+      - items:
+          - description: Phandle reference to a Mediatek GCE Mailbox
+          - description:
+              GCE subsys id mapping to a client defined in header
+              include/dt-bindings/gce/<chip>-gce.h.
+          - description: offset for the GCE register offset
+          - description: size of the GCE register offset
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        od@14023000 {
+            compatible = "mediatek,mt8173-disp-od";
+            reg = <0 0x14023000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_DISP_OD>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1402XXXX 0x3000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
new file mode 100644
index 000000000000..bacdfe7d08a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl-2l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay 2 layer
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overlay 2 layer, namely OVL-2L, provides 2 more layer
+  for OVL.
+  OVL-2L device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-disp-ovl-2l
+          - mediatek,mt8192-disp-ovl-2l
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ovl-2l
+          - const: mediatek,mt8192-disp-ovl-2l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: OVL-2L Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: OVL input port from MMSYS, VDOSYS or other OVLs
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          OVL output to the input of the next desired component in the
+          display pipeline, for example one of the available COLOR, RDMA
+          or WDMA blocks.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl_2l0: ovl@14009000 {
+            compatible = "mediatek,mt8183-disp-ovl-2l";
+            reg = <0 0x14009000 0 0x1000>;
+            interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+            iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
new file mode 100644
index 000000000000..4f110635afb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overlay, namely OVL, can do alpha blending from
+  the memory.
+  OVL device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-ovl
+          - mediatek,mt8173-disp-ovl
+          - mediatek,mt8183-disp-ovl
+          - mediatek,mt8192-disp-ovl
+          - mediatek,mt8195-disp-ovl
+          - mediatek,mt8195-mdp3-ovl
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-ovl
+              - mediatek,mt2712-disp-ovl
+          - const: mediatek,mt2701-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-ovl
+          - const: mediatek,mt8173-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ovl
+              - mediatek,mt8365-disp-ovl
+          - const: mediatek,mt8192-disp-ovl
+      - items:
+          - const: mediatek,mt8188-disp-ovl
+          - const: mediatek,mt8195-disp-ovl
+      - items:
+          - const: mediatek,mt8188-mdp3-ovl
+          - const: mediatek,mt8195-mdp3-ovl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: OVL Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: OVL input port from MMSYS or one of multiple VDOSYS
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          OVL output to the input of the next desired component in the
+          display pipeline, for example one of the available COLOR, RDMA
+          or WDMA blocks.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl0: ovl@1400c000 {
+            compatible = "mediatek,mt8173-disp-ovl";
+            reg = <0 0x1400c000 0 0x1000>;
+            interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0>;
+            iommus = <&iommu M4U_PORT_DISP_OVL0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
new file mode 100644
index 000000000000..86787866ced0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Padding
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  Padding provides ability to add pixels to width and height of a layer with
+  specified colors. Due to hardware design, Mixer in VDOSYS1 requires
+  width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
+  we need Padding to deal with odd width.
+  Please notice that even if the Padding is in bypass mode, settings in
+  register must be cleared to 0, or undefined behaviors could happen.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8188-disp-padding
+          - mediatek,mt8195-mdp3-padding
+      - items:
+          - const: mediatek,mt8188-mdp3-padding
+          - const: mediatek,mt8195-mdp3-padding
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Padding's clocks
+
+  mediatek,gce-client-reg:
+    description:
+      GCE (Global Command Engine) is a multi-core micro processor that helps
+      its clients to execute commands without interrupting CPU. This property
+      describes GCE client's information that is composed by 4 fields.
+      1. Phandle of the GCE (there may be several GCE processors)
+      2. Sub-system ID defined in the dt-binding like a user ID
+         (Please refer to include/dt-bindings/gce/<chip>-gce.h)
+      3. Offset from base address of the subsys you are at
+      4. Size of the register the client needs
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: Phandle of the GCE
+        - description: Subsys ID defined in the dt-binding
+        - description: Offset from base address of the subsys
+        - description: Size of register
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mediatek,mt8188-clk.h>
+    #include <dt-bindings/power/mediatek,mt8188-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        padding0: padding@1c11d000 {
+            compatible = "mediatek,mt8188-disp-padding";
+            reg = <0 0x1c11d000 0 0x1000>;
+            clocks = <&vdosys1 CLK_VDO1_PADDING0>;
+            power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+            mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
new file mode 100644
index 000000000000..fb6fe4742624
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,postmask.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display postmask
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display postmask, namely POSTMASK, provides round corner pattern
+  generation.
+  POSTMASK device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8192-disp-postmask
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-postmask
+              - mediatek,mt8188-disp-postmask
+          - const: mediatek,mt8192-disp-postmask
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: POSTMASK Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: POSTMASK input port, usually from GAMMA
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          POSTMASK output to the input of the next desired component in the
+          display pipeline, for example one of the available DITHER blocks.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+    #include <dt-bindings/gce/mt8192-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        postmask0: postmask@1400d000 {
+            compatible = "mediatek,mt8192-disp-postmask";
+            reg = <0 0x1400d000 0 0x1000>;
+            interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&scpsys MT8192_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
new file mode 100644
index 000000000000..878f676b581f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Read Direct Memory Access
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek Read Direct Memory Access(RDMA) component used to read the
+  data into DMA. It provides real time data to the back-end panel
+  driver, such as DSI, DPI and DP_INTF.
+  It contains one line buffer to store the sufficient pixel data.
+  RDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-rdma
+          - mediatek,mt8173-disp-rdma
+          - mediatek,mt8183-disp-rdma
+          - mediatek,mt8195-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt8188-disp-rdma
+          - const: mediatek,mt8195-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-rdma
+              - mediatek,mt2712-disp-rdma
+          - const: mediatek,mt2701-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt6795-disp-rdma
+          - const: mediatek,mt8173-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-rdma
+              - mediatek,mt8192-disp-rdma
+              - mediatek,mt8365-disp-rdma
+          - const: mediatek,mt8183-disp-rdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: RDMA Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,rdma-fifo-size:
+    description:
+      rdma fifo size may be different even in same SOC, add this property to the
+      corresponding rdma.
+      The value below is the Max value which defined in hardware data sheet
+      mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
+      mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
+      mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8192, 5120, 2048]
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: RDMA input port, usually from MMSYS, OD or OVL
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          RDMA output to the input of the next desired component in the
+          display pipeline, for example one of the available COLOR, DPI,
+          DSI, MERGE or UFOE blocks.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rdma0: rdma@1400e000 {
+            compatible = "mediatek,mt8173-disp-rdma";
+            reg = <0 0x1400e000 0 0x1000>;
+            interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+            mediatek,rdma-fifo-size = <8192>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
new file mode 100644
index 000000000000..4b6ff546757e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,split.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display split
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display split, namely SPLIT, is used to split stream to two
+  encoders.
+  SPLIT device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-split
+          - mediatek,mt8195-mdp3-split
+      - items:
+          - const: mediatek,mt6795-disp-split
+          - const: mediatek,mt8173-disp-split
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SPLIT Clock
+      - description: Used for interfacing with the HDMI RX signal source.
+      - description: Paired with receiving HDMI RX metadata.
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8195-mdp3-split
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+
+      required:
+        - mediatek,gce-client-reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8173-disp-split
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        split0: split@14018000 {
+            compatible = "mediatek,mt8173-disp-split";
+            reg = <0 0x14018000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
new file mode 100644
index 000000000000..036a66ed42e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ufoe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display UFOe
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display UFOe stands for Unified Frame Optimization engine.
+  UFOe can cut the data rate for DSI port which may lead to reduce power
+  consumption.
+  UFOe device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-ufoe
+      - items:
+          - const: mediatek,mt6795-disp-ufoe
+          - const: mediatek,mt8173-disp-ufoe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: UFOe Clock
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Input and output ports can have multiple endpoints, each of those
+      connects to either the primary, secondary, etc, display pipeline.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: UFOE input, usually from one of the RDMA blocks.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          UFOE output to the input of the next desired component in the
+          display pipeline, usually one of the available DSI blocks.
+
+    required:
+      - port@0
+      - port@1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: describes how to locate the GCE client register
+    items:
+      - items:
+          - description: Phandle reference to a Mediatek GCE Mailbox
+          - description:
+              GCE subsys id mapping to a client defined in header
+              include/dt-bindings/gce/<chip>-gce.h.
+          - description: offset for the GCE register offset
+          - description: size of the GCE register offset
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufoe@1401a000 {
+            compatible = "mediatek,mt8173-disp-ufoe";
+            reg = <0 0x1401a000 0 0x1000>;
+            interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_UFOE>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xa000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
new file mode 100644
index 000000000000..a3a2b71a4523
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Write Direct Memory Access
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek Write Direct Memory Access(WDMA) component used to write
+  the data into DMA.
+  WDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-wdma
+      - items:
+          - const: mediatek,mt6795-disp-wdma
+          - const: mediatek,mt8173-disp-wdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: WDMA Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wdma0: wdma@14011000 {
+            compatible = "mediatek,mt8173-disp-wdma";
+            reg = <0 0x14011000 0 0x1000>;
+            interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index 63e585f48789..ebda78db87a6 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: MSM Display Port Controller
 
 maintainers:
-  - Kuogee Hsieh <khsieh@codeaurora.org>
+  - Kuogee Hsieh <quic_khsieh@quicinc.com>
+  - Abhinav Kumar <quic_abhinavk@quicinc.com>
 
 description: |
   Device tree bindings for DisplayPort host controller for MSM targets
@@ -15,47 +16,99 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7180-dp
-      - qcom,sc8180x-dp
-      - qcom,sc8180x-edp
+    oneOf:
+      - enum:
+          - qcom,glymur-dp
+          - qcom,sa8775p-dp
+          - qcom,sc7180-dp
+          - qcom,sc7280-dp
+          - qcom,sc7280-edp
+          - qcom,sc8180x-dp
+          - qcom,sc8180x-edp
+          - qcom,sc8280xp-dp
+          - qcom,sc8280xp-edp
+          - qcom,sdm845-dp
+          - qcom,sm8350-dp
+          - qcom,sm8650-dp
+          - qcom,x1e80100-dp
+
+      - items:
+          - enum:
+              - qcom,qcs8300-dp
+          - const: qcom,sa8775p-dp
+
+      - items:
+          - enum:
+              - qcom,sm6350-dp
+          - const: qcom,sc7180-dp
+
+      # deprecated entry for compatibility with old DT
+      - items:
+          - enum:
+              - qcom,sm6350-dp
+          - const: qcom,sm8350-dp
+        deprecated: true
+
+      - items:
+          - enum:
+              - qcom,sar2130p-dp
+              - qcom,sm7150-dp
+              - qcom,sm8150-dp
+              - qcom,sm8250-dp
+              - qcom,sm8450-dp
+              - qcom,sm8550-dp
+          - const: qcom,sm8350-dp
+
+      - items:
+          - enum:
+              - qcom,sm6150-dp
+          - const: qcom,sm8150-dp
+          - const: qcom,sm8350-dp
+
+      - items:
+          - enum:
+              - qcom,sm8750-dp
+          - const: qcom,sm8650-dp
 
   reg:
+    minItems: 4
     items:
       - description: ahb register block
       - description: aux register block
       - description: link register block
       - description: p0 register block
       - description: p1 register block
+      - description: p2 register block
+      - description: p3 register block
+      - description: mst2link register block
+      - description: mst3link register block
 
   interrupts:
     maxItems: 1
 
   clocks:
+    minItems: 5
     items:
       - description: AHB clock to enable register access
       - description: Display Port AUX clock
       - description: Display Port Link clock
       - description: Link interface clock between DP and PHY
-      - description: Display Port Pixel clock
+      - description: Display Port stream 0 Pixel clock
+      - description: Display Port stream 1 Pixel clock
+      - description: Display Port stream 2 Pixel clock
+      - description: Display Port stream 3 Pixel clock
 
   clock-names:
+    minItems: 5
     items:
       - const: core_iface
       - const: core_aux
       - const: ctrl_link
       - const: ctrl_link_iface
       - const: stream_pixel
-
-  assigned-clocks:
-    items:
-      - description: link clock source
-      - description: pixel clock source
-
-  assigned-clock-parents:
-    items:
-      - description: phy 0 parent
-      - description: phy 1 parent
+      - const: stream_1_pixel
+      - const: stream_2_pixel
+      - const: stream_3_pixel
 
   phys:
     maxItems: 1
@@ -64,15 +117,33 @@ properties:
     items:
       - const: dp
 
-  operating-points-v2:
-    maxItems: 1
+  operating-points-v2: true
+
+  opp-table:
+    type: object
 
   power-domains:
     maxItems: 1
 
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    deprecated: true
+    minItems: 1
+    maxItems: 4
+    items:
+      maximum: 3
+
   "#sound-dai-cells":
     const: 0
 
+  vdda-0p9-supply:
+    deprecated: true
+  vdda-1p2-supply:
+    deprecated: true
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
     properties:
@@ -81,8 +152,29 @@ properties:
         description: Input endpoint of the controller
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: Output endpoint of the controller
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
+
+              link-frequencies:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 1620000000, 2700000000, 5400000000, 8100000000 ]
+
+    required:
+      - port@0
+      - port@1
 
 required:
   - compatible
@@ -92,11 +184,133 @@ required:
   - clock-names
   - phys
   - phy-names
-  - "#sound-dai-cells"
   - power-domains
   - ports
 
-additionalProperties: false
+allOf:
+  # AUX BUS does not exist on DP controllers
+  # Audio output also is present only on DP output
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-edp
+              - qcom,sc8180x-edp
+              - qcom,sc8280xp-edp
+    then:
+      properties:
+        "#sound-dai-cells": false
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,glymur-dp
+                - qcom,sa8775p-dp
+                - qcom,x1e80100-dp
+      then:
+        $ref: /schemas/sound/dai-common.yaml#
+        oneOf:
+          - required:
+              - aux-bus
+          - required:
+              - "#sound-dai-cells"
+      else:
+        properties:
+          aux-bus: false
+        required:
+          - "#sound-dai-cells"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              # these platforms support SST only
+              - qcom,sc7180-dp
+              - qcom,sc7280-dp
+              - qcom,sc7280-edp
+              - qcom,sc8180x-edp
+              - qcom,sc8280xp-edp
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clocks-names:
+          minItems: 5
+          maxItems: 5
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              # these platforms support 2 streams MST on some interfaces,
+              # others are SST only
+              - qcom,glymur-dp
+              - qcom,sc8280xp-dp
+              - qcom,x1e80100-dp
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        clocks:
+          minItems: 5
+          maxItems: 6
+        clocks-names:
+          minItems: 5
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            # 2 streams MST
+            enum:
+              - qcom,sc8180x-dp
+              - qcom,sdm845-dp
+              - qcom,sm8350-dp
+              - qcom,sm8650-dp
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clocks-names:
+          minItems: 6
+          maxItems: 6
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              # these platforms support 4 stream MST on first DP,
+              # 2 streams MST on the second one.
+              - qcom,sa8775p-dp
+    then:
+      properties:
+        reg:
+          minItems: 9
+          maxItems: 9
+        clocks:
+          minItems: 6
+          maxItems: 8
+        clocks-names:
+          minItems: 6
+          maxItems: 8
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -149,6 +363,8 @@ examples:
                 reg = <1>;
                 endpoint {
                     remote-endpoint = <&typec>;
+                    data-lanes = <0 1>;
+                    link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
new file mode 100644
index 000000000000..3f953aa5e694
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
@@ -0,0 +1,56 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU common properties
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description: |
+  Common properties for QCom DPU display controller.
+
+# Do not select this by default, otherwise it is also selected for all
+# display-controller@ nodes
+select:
+  false
+
+properties:
+  $nodename:
+    pattern: '^display-controller@[0-9a-f]+$'
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains the list of output ports from DPU device. These ports
+      connect to interfaces that are external to the DPU hardware,
+      such as DSI, DP etc.
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        $ref: /schemas/graph.yaml#/properties/port
+
+    # at least one port is required
+    required:
+      - port@0
+
+required:
+  - interrupts
+  - power-domains
+  - operating-points-v2
+  - ports
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
deleted file mode 100644
index 12a86b1ec1bc..000000000000
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
+++ /dev/null
@@ -1,228 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for SC7180 target
-
-maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
-
-description: |
-  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for SC7180 target.
-
-properties:
-  compatible:
-    items:
-      - const: qcom,sc7180-mdss
-
-  reg:
-    maxItems: 1
-
-  reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Display AHB clock from gcc
-      - description: Display AHB clock from dispcc
-      - description: Display core clock
-
-  clock-names:
-    items:
-      - const: iface
-      - const: ahb
-      - const: core
-
-  interrupts:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-
-  ranges: true
-
-  interconnects:
-    items:
-      - description: Interconnect path specifying the port ids for data bus
-
-  interconnect-names:
-    const: mdp0-mem
-
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
-
-    properties:
-      compatible:
-        items:
-          - const: qcom,sc7180-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display hf axi clock
-          - description: Display ahb clock
-          - description: Display rotator clock
-          - description: Display lut clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: bus
-          - const: iface
-          - const: rot
-          - const: lut
-          - const: core
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI, DP etc. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI1)
-
-          port@2:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF0 (DP)
-
-        required:
-          - port@0
-
-    required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - power-domains
-  - clocks
-  - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
-    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interconnect/qcom,sdm845.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-
-    display-subsystem@ae00000 {
-         #address-cells = <1>;
-         #size-cells = <1>;
-         compatible = "qcom,sc7180-mdss";
-         reg = <0xae00000 0x1000>;
-         reg-names = "mdss";
-         power-domains = <&dispcc MDSS_GDSC>;
-         clocks = <&gcc GCC_DISP_AHB_CLK>,
-                  <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
-         clock-names = "iface", "ahb", "core";
-
-         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-         interrupt-controller;
-         #interrupt-cells = <1>;
-
-         interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
-         interconnect-names = "mdp0-mem";
-
-         iommus = <&apps_smmu 0x800 0x2>;
-         ranges;
-
-         display-controller@ae01000 {
-                   compatible = "qcom,sc7180-dpu";
-                   reg = <0x0ae01000 0x8f000>,
-                         <0x0aeb0000 0x2008>;
-
-                   reg-names = "mdp", "vbif";
-
-                   clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
-                            <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                            <&dispcc DISP_CC_MDSS_ROT_CLK>,
-                            <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
-                            <&dispcc DISP_CC_MDSS_MDP_CLK>,
-                            <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-                   clock-names = "bus", "iface", "rot", "lut", "core",
-                                 "vsync";
-
-                   interrupt-parent = <&mdss>;
-                   interrupts = <0>;
-                   power-domains = <&rpmhpd SC7180_CX>;
-                   operating-points-v2 = <&mdp_opp_table>;
-
-                   ports {
-                           #address-cells = <1>;
-                           #size-cells = <0>;
-
-                           port@0 {
-                                   reg = <0>;
-                                   dpu_intf1_out: endpoint {
-                                                  remote-endpoint = <&dsi0_in>;
-                                   };
-                           };
-
-                            port@2 {
-                                    reg = <2>;
-                                    dpu_intf0_out: endpoint {
-                                                   remote-endpoint = <&dp_in>;
-                                    };
-                            };
-                   };
-         };
-    };
-...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
deleted file mode 100644
index fbeb931a026e..000000000000
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml
+++ /dev/null
@@ -1,232 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-sc7280.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for SC7280
-
-maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
-
-description: |
-  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for SC7280.
-
-properties:
-  compatible:
-    const: qcom,sc7280-mdss
-
-  reg:
-    maxItems: 1
-
-  reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Display AHB clock from gcc
-      - description: Display AHB clock from dispcc
-      - description: Display core clock
-
-  clock-names:
-    items:
-      - const: iface
-      - const: ahb
-      - const: core
-
-  interrupts:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-
-  ranges: true
-
-  interconnects:
-    items:
-      - description: Interconnect path specifying the port ids for data bus
-
-  interconnect-names:
-    const: mdp0-mem
-
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
-
-    properties:
-      compatible:
-        const: qcom,sc7280-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display hf axi clock
-          - description: Display sf axi clock
-          - description: Display ahb clock
-          - description: Display lut clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: bus
-          - const: nrt_bus
-          - const: iface
-          - const: lut
-          - const: core
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI, DP etc. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI)
-
-          port@1:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF5 (EDP)
-
-        required:
-          - port@0
-
-    required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - power-domains
-  - clocks
-  - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
-    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interconnect/qcom,sc7280.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-
-    display-subsystem@ae00000 {
-         #address-cells = <1>;
-         #size-cells = <1>;
-         compatible = "qcom,sc7280-mdss";
-         reg = <0xae00000 0x1000>;
-         reg-names = "mdss";
-         power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
-         clocks = <&gcc GCC_DISP_AHB_CLK>,
-                  <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
-         clock-names = "iface",
-                       "ahb",
-                       "core";
-
-         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-         interrupt-controller;
-         #interrupt-cells = <1>;
-
-         interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
-         interconnect-names = "mdp0-mem";
-
-         iommus = <&apps_smmu 0x900 0x402>;
-         ranges;
-
-         display-controller@ae01000 {
-                   compatible = "qcom,sc7280-dpu";
-                   reg = <0x0ae01000 0x8f000>,
-                         <0x0aeb0000 0x2008>;
-
-                   reg-names = "mdp", "vbif";
-
-                   clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
-                            <&gcc GCC_DISP_SF_AXI_CLK>,
-                            <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                            <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
-                            <&dispcc DISP_CC_MDSS_MDP_CLK>,
-                            <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-                   clock-names = "bus",
-                                 "nrt_bus",
-                                 "iface",
-                                 "lut",
-                                 "core",
-                                 "vsync";
-
-                   interrupt-parent = <&mdss>;
-                   interrupts = <0>;
-                   power-domains = <&rpmhpd SC7280_CX>;
-                   operating-points-v2 = <&mdp_opp_table>;
-
-                   ports {
-                           #address-cells = <1>;
-                           #size-cells = <0>;
-
-                           port@0 {
-                                   reg = <0>;
-                                   dpu_intf1_out: endpoint {
-                                           remote-endpoint = <&dsi0_in>;
-                                   };
-                           };
-
-                           port@1 {
-                                   reg = <1>;
-                                   dpu_intf5_out: endpoint {
-                                           remote-endpoint = <&edp_in>;
-                                   };
-                           };
-                   };
-         };
-    };
-...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
deleted file mode 100644
index b4ea7c92fb3d..000000000000
--- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
+++ /dev/null
@@ -1,212 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for SDM845 target
-
-maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
-
-description: |
-  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for SDM845 target.
-
-properties:
-  compatible:
-    items:
-      - const: qcom,sdm845-mdss
-
-  reg:
-    maxItems: 1
-
-  reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Display AHB clock from gcc
-      - description: Display AXI clock
-      - description: Display core clock
-
-  clock-names:
-    items:
-      - const: iface
-      - const: bus
-      - const: core
-
-  interrupts:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
-
-  ranges: true
-
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
-
-    properties:
-      compatible:
-        items:
-          - const: qcom,sdm845-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display ahb clock
-          - description: Display axi clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: iface
-          - const: bus
-          - const: core
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI, DP etc. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI1)
-
-          port@1:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF2 (DSI2)
-
-        required:
-          - port@0
-          - port@1
-
-    required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - power-domains
-  - clocks
-  - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-
-    display-subsystem@ae00000 {
-          #address-cells = <1>;
-          #size-cells = <1>;
-          compatible = "qcom,sdm845-mdss";
-          reg = <0x0ae00000 0x1000>;
-          reg-names = "mdss";
-          power-domains = <&dispcc MDSS_GDSC>;
-
-          clocks = <&gcc GCC_DISP_AHB_CLK>,
-                   <&gcc GCC_DISP_AXI_CLK>,
-                   <&dispcc DISP_CC_MDSS_MDP_CLK>;
-          clock-names = "iface", "bus", "core";
-
-          interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-          interrupt-controller;
-          #interrupt-cells = <1>;
-
-          iommus = <&apps_smmu 0x880 0x8>,
-                   <&apps_smmu 0xc80 0x8>;
-          ranges;
-
-          display-controller@ae01000 {
-                    compatible = "qcom,sdm845-dpu";
-                    reg = <0x0ae01000 0x8f000>,
-                          <0x0aeb0000 0x2008>;
-                    reg-names = "mdp", "vbif";
-
-                    clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                             <&dispcc DISP_CC_MDSS_AXI_CLK>,
-                             <&dispcc DISP_CC_MDSS_MDP_CLK>,
-                             <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-                    clock-names = "iface", "bus", "core", "vsync";
-
-                    interrupt-parent = <&mdss>;
-                    interrupts = <0>;
-                    power-domains = <&rpmhpd SDM845_CX>;
-                    operating-points-v2 = <&mdp_opp_table>;
-
-                    ports {
-                           #address-cells = <1>;
-                           #size-cells = <0>;
-
-                           port@0 {
-                                   reg = <0>;
-                                   dpu_intf1_out: endpoint {
-                                                  remote-endpoint = <&dsi0_in>;
-                                   };
-                           };
-
-                           port@1 {
-                                   reg = <1>;
-                                   dpu_intf2_out: endpoint {
-                                                  remote-endpoint = <&dsi1_in>;
-                                   };
-                           };
-                    };
-          };
-    };
-...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 35426fde8610..4400d4cce072 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
@@ -7,15 +7,48 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI controller
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
-
-allOf:
-  - $ref: "../dsi-controller.yaml#"
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 properties:
   compatible:
-    items:
-      - const: qcom,mdss-dsi-ctrl
+    oneOf:
+      - items:
+          - enum:
+              - qcom,apq8064-dsi-ctrl
+              - qcom,msm8226-dsi-ctrl
+              - qcom,msm8916-dsi-ctrl
+              - qcom,msm8953-dsi-ctrl
+              - qcom,msm8974-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
+              - qcom,msm8996-dsi-ctrl
+              - qcom,msm8998-dsi-ctrl
+              - qcom,qcm2290-dsi-ctrl
+              - qcom,sa8775p-dsi-ctrl
+              - qcom,sar2130p-dsi-ctrl
+              - qcom,sc7180-dsi-ctrl
+              - qcom,sc7280-dsi-ctrl
+              - qcom,sc8180x-dsi-ctrl
+              - qcom,sdm660-dsi-ctrl
+              - qcom,sdm670-dsi-ctrl
+              - qcom,sdm845-dsi-ctrl
+              - qcom,sm6115-dsi-ctrl
+              - qcom,sm6125-dsi-ctrl
+              - qcom,sm6150-dsi-ctrl
+              - qcom,sm6350-dsi-ctrl
+              - qcom,sm6375-dsi-ctrl
+              - qcom,sm7150-dsi-ctrl
+              - qcom,sm8150-dsi-ctrl
+              - qcom,sm8250-dsi-ctrl
+              - qcom,sm8350-dsi-ctrl
+              - qcom,sm8450-dsi-ctrl
+              - qcom,sm8550-dsi-ctrl
+              - qcom,sm8650-dsi-ctrl
+              - qcom,sm8750-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+      - enum:
+          - qcom,dsi-ctrl-6g-qcm2290
+          - qcom,mdss-dsi-ctrl # This should always come with an SoC-specific compatible
+        deprecated: true
 
   reg:
     maxItems: 1
@@ -27,36 +60,34 @@ properties:
     maxItems: 1
 
   clocks:
-    items:
-      - description: Display byte clock
-      - description: Display byte interface clock
-      - description: Display pixel clock
-      - description: Display escape clock
-      - description: Display AHB clock
-      - description: Display AXI clock
+    description: |
+      Several clocks are used, depending on the variant. Typical ones are::
+       - bus:: Display AHB clock.
+       - byte:: Display byte clock.
+       - byte_intf:: Display byte interface clock.
+       - core:: Display core clock.
+       - core_mss:: Core MultiMedia SubSystem clock.
+       - iface:: Display AXI clock.
+       - mdp_core:: MDP Core clock.
+       - mnoc:: MNOC clock
+       - pixel:: Display pixel clock.
+    minItems: 3
+    maxItems: 12
 
   clock-names:
-    items:
-      - const: byte
-      - const: byte_intf
-      - const: pixel
-      - const: core
-      - const: iface
-      - const: bus
+    minItems: 3
+    maxItems: 12
 
   phys:
     maxItems: 1
 
   phy-names:
+    deprecated: true
     const: dsi
 
-  "#address-cells": true
-
-  "#size-cells": true
-
   syscon-sfpb:
     description: A phandle to mmss_sfpb syscon node (only for DSIv2).
-    $ref: "/schemas/types.yaml#/definitions/phandle"
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   qcom,dual-dsi-mode:
     type: boolean
@@ -64,15 +95,30 @@ properties:
       Indicates if the DSI controller is driving a panel which needs
       2 DSI links.
 
+  qcom,master-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller is the master DSI controller when
+      qcom,dual-dsi-mode enabled.
+
+  qcom,sync-dual-dsi:
+    type: boolean
+    description: |
+      Indicates if the DSI controller needs to sync the other DSI controller
+      with MIPI DCS commands when qcom,dual-dsi-mode enabled.
+
   assigned-clocks:
     minItems: 2
-    maxItems: 2
+    maxItems: 4
     description: |
-      Parents of "byte" and "pixel" for the given platform.
+      For DSI on SM8650 and older: parents of "byte" and "pixel" for the given
+      platform.
+      For DSIv2 platforms this should contain "byte", "esc", "src" and
+      "pixel_src" clocks.
 
   assigned-clock-parents:
     minItems: 2
-    maxItems: 2
+    maxItems: 4
     description: |
       The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
 
@@ -81,15 +127,18 @@ properties:
 
   operating-points-v2: true
 
+  opp-table:
+    type: object
+
   ports:
-    $ref: "/schemas/graph.yaml#/properties/ports"
+    $ref: /schemas/graph.yaml#/properties/ports
     description: |
       Contains DSI controller input and output ports as children, each
       containing one endpoint subnode.
 
     properties:
       port@0:
-        $ref: "/schemas/graph.yaml#/$defs/port-base"
+        $ref: /schemas/graph.yaml#/$defs/port-base
         unevaluatedProperties: false
         description: |
           Input endpoints of the controller.
@@ -100,12 +149,12 @@ properties:
             properties:
               data-lanes:
                 maxItems: 4
-                minItems: 4
+                minItems: 1
                 items:
                   enum: [ 0, 1, 2, 3 ]
 
       port@1:
-        $ref: "/schemas/graph.yaml#/$defs/port-base"
+        $ref: /schemas/graph.yaml#/$defs/port-base
         unevaluatedProperties: false
         description: |
           Output endpoints of the controller.
@@ -116,14 +165,54 @@ properties:
             properties:
               data-lanes:
                 maxItems: 4
-                minItems: 4
+                minItems: 1
                 items:
                   enum: [ 0, 1, 2, 3 ]
 
+              qcom,te-source:
+                $ref: /schemas/types.yaml#/definitions/string
+                description:
+                  Specifies the source of vsync signal from the panel used for
+                  tearing elimination.
+                default: mdp_vsync_p
+                enum:
+                  - mdp_vsync_p
+                  - mdp_vsync_s
+                  - mdp_vsync_e
+                  - timer0
+                  - timer1
+                  - timer2
+                  - timer3
+                  - timer4
+
     required:
       - port@0
       - port@1
 
+  avdd-supply:
+    description:
+      Phandle to vdd regulator device node
+
+  refgen-supply:
+    description:
+      Phandle to REFGEN regulator device node
+
+  vcca-supply:
+    description:
+      Phandle to vdd regulator device node
+
+  vdd-supply:
+    description:
+      VDD regulator
+
+  vddio-supply:
+    description:
+      VDD-IO regulator
+
+  vdda-supply:
+    description:
+      VDDA regulator
+
 required:
   - compatible
   - reg
@@ -132,73 +221,262 @@ required:
   - clocks
   - clock-names
   - phys
-  - phy-names
-  - assigned-clocks
-  - assigned-clock-parents
-  - power-domains
-  - operating-points-v2
   - ports
 
-additionalProperties: false
+allOf:
+  - $ref: ../dsi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8064-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: core_mmss
+            - const: src
+            - const: byte
+            - const: pixel
+            - const: core
+      required:
+        - assigned-clocks
+        - assigned-clock-parents
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-dsi-ctrl
+              - qcom,msm8953-dsi-ctrl
+              - qcom,msm8976-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: bus
+            - const: byte
+            - const: pixel
+            - const: core
+      required:
+        - assigned-clocks
+        - assigned-clock-parents
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-dsi-ctrl
+              - qcom,msm8974-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: bus
+            - const: byte
+            - const: pixel
+            - const: core
+            - const: core_mmss
+      required:
+        - assigned-clocks
+        - assigned-clock-parents
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: byte
+            - const: iface
+            - const: bus
+            - const: core_mmss
+            - const: pixel
+            - const: core
+      required:
+        - assigned-clocks
+        - assigned-clock-parents
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-dsi-ctrl
+              - qcom,sa8775p-dsi-ctrl
+              - qcom,sar2130p-dsi-ctrl
+              - qcom,sc7180-dsi-ctrl
+              - qcom,sc7280-dsi-ctrl
+              - qcom,sc8180x-dsi-ctrl
+              - qcom,sdm845-dsi-ctrl
+              - qcom,sm6115-dsi-ctrl
+              - qcom,sm6125-dsi-ctrl
+              - qcom,sm6350-dsi-ctrl
+              - qcom,sm6375-dsi-ctrl
+              - qcom,sm6150-dsi-ctrl
+              - qcom,sm7150-dsi-ctrl
+              - qcom,sm8150-dsi-ctrl
+              - qcom,sm8250-dsi-ctrl
+              - qcom,sm8350-dsi-ctrl
+              - qcom,sm8450-dsi-ctrl
+              - qcom,sm8550-dsi-ctrl
+              - qcom,sm8650-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: byte
+            - const: byte_intf
+            - const: pixel
+            - const: core
+            - const: iface
+            - const: bus
+      required:
+        - assigned-clocks
+        - assigned-clock-parents
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8750-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          minItems: 12
+          maxItems: 12
+        clock-names:
+          items:
+            - const: byte
+            - const: byte_intf
+            - const: pixel
+            - const: core
+            - const: iface
+            - const: bus
+            - const: dsi_pll_pixel
+            - const: dsi_pll_byte
+            - const: esync
+            - const: osc
+            - const: byte_src
+            - const: pixel_src
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: byte
+            - const: byte_intf
+            - const: mnoc
+            - const: iface
+            - const: bus
+            - const: core_mmss
+            - const: pixel
+            - const: core
+      required:
+        - assigned-clocks
+        - assigned-clock-parents
+
+unevaluatedProperties: false
 
 examples:
   - |
-     #include <dt-bindings/interrupt-controller/arm-gic.h>
-     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-     #include <dt-bindings/power/qcom-rpmpd.h>
-
-     dsi@ae94000 {
-           compatible = "qcom,mdss-dsi-ctrl";
-           reg = <0x0ae94000 0x400>;
-           reg-names = "dsi_ctrl";
-
-           #address-cells = <1>;
-           #size-cells = <0>;
-
-           interrupt-parent = <&mdss>;
-           interrupts = <4>;
-
-           clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
-                    <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
-                    <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
-                    <&dispcc DISP_CC_MDSS_ESC0_CLK>,
-                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                    <&dispcc DISP_CC_MDSS_AXI_CLK>;
-           clock-names = "byte",
-                         "byte_intf",
-                         "pixel",
-                         "core",
-                         "iface",
-                         "bus";
-
-           phys = <&dsi0_phy>;
-           phy-names = "dsi";
-
-           assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-           assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
-
-           power-domains = <&rpmhpd SC7180_CX>;
-           operating-points-v2 = <&dsi_opp_table>;
-
-           ports {
-                  #address-cells = <1>;
-                  #size-cells = <0>;
-
-                  port@0 {
-                          reg = <0>;
-                          dsi0_in: endpoint {
-                                   remote-endpoint = <&dpu_intf1_out>;
-                          };
-                  };
-
-                  port@1 {
-                          reg = <1>;
-                          dsi0_out: endpoint {
-                                   remote-endpoint = <&sn65dsi86_in>;
-                                   data-lanes = <0 1 2 3>;
-                          };
-                  };
-           };
-     };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    dsi@ae94000 {
+        compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+        reg = <0x0ae94000 0x400>;
+        reg-names = "dsi_ctrl";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <4>;
+
+        clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+        clock-names = "byte",
+                      "byte_intf",
+                      "pixel",
+                      "core",
+                      "iface",
+                      "bus";
+
+        phys = <&dsi0_phy>;
+        phy-names = "dsi";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+        assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
+        power-domains = <&rpmhpd SC7180_CX>;
+        operating-points-v2 = <&dsi_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dpu_intf1_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&sn65dsi86_in>;
+                    data-lanes = <0 1 2 3>;
+                    qcom,te-source = "mdp_vsync_e";
+                };
+            };
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index 4399715953e1..fc9abf090f0d 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml#
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 10nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
@@ -35,34 +35,67 @@ properties:
       Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and
       connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target
 
+  qcom,phy-rescode-offset-top:
+    $ref: /schemas/types.yaml#/definitions/int8-array
+    maxItems: 5
+    description:
+      Integer array of offset for pull-up legs rescode for all five lanes.
+      To offset the drive strength from the calibrated value in an increasing
+      manner, -32 is the weakest and +31 is the strongest.
+    items:
+      minimum: -32
+      maximum: 31
+
+  qcom,phy-rescode-offset-bot:
+    $ref: /schemas/types.yaml#/definitions/int8-array
+    maxItems: 5
+    description:
+      Integer array of offset for pull-down legs rescode for all five lanes.
+      To offset the drive strength from the calibrated value in a decreasing
+      manner, -32 is the weakest and +31 is the strongest.
+    items:
+      minimum: -32
+      maximum: 31
+
+  qcom,phy-drive-ldo-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The PHY LDO has an amplitude tuning feature to adjust the LDO output
+      for the HSTX drive. Use supported levels (mV) to offset the drive level
+      from the default value.
+    enum: [ 375, 400, 425, 450, 475, 500 ]
+
 required:
   - compatible
   - reg
   - reg-names
-  - vdds-supply
 
 unevaluatedProperties: false
 
 examples:
   - |
-     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-     #include <dt-bindings/clock/qcom,rpmh.h>
-
-     dsi-phy@ae94400 {
-         compatible = "qcom,dsi-phy-10nm";
-         reg = <0x0ae94400 0x200>,
-               <0x0ae94600 0x280>,
-               <0x0ae94a00 0x1e0>;
-         reg-names = "dsi_phy",
-                     "dsi_phy_lane",
-                     "dsi_pll";
-
-         #clock-cells = <1>;
-         #phy-cells = <0>;
-
-         vdds-supply = <&vdda_mipi_dsi0_pll>;
-         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&rpmhcc RPMH_CXO_CLK>;
-         clock-names = "iface", "ref";
-     };
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    dsi-phy@ae94400 {
+        compatible = "qcom,dsi-phy-10nm";
+        reg = <0x0ae94400 0x200>,
+              <0x0ae94600 0x280>,
+              <0x0ae94a00 0x1e0>;
+        reg-names = "dsi_phy",
+                    "dsi_phy_lane",
+                    "dsi_pll";
+
+        #clock-cells = <1>;
+        #phy-cells = <0>;
+
+        vdds-supply = <&vdda_mipi_dsi0_pll>;
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "ref";
+
+        qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>;
+        qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>;
+        qcom,phy-drive-ldo-level = <400>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 81dbee4803c0..206a9a4b3845 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml#
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 14nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
@@ -16,8 +16,11 @@ properties:
   compatible:
     enum:
       - qcom,dsi-phy-14nm
+      - qcom,dsi-phy-14nm-2290
       - qcom,dsi-phy-14nm-660
       - qcom,dsi-phy-14nm-8953
+      - qcom,sm6125-dsi-phy-14nm
+      - qcom,sm6150-dsi-phy-14nm
 
   reg:
     items:
@@ -34,34 +37,43 @@ properties:
   vcca-supply:
     description: Phandle to vcca regulator device node.
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier for an optional power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing the power domain's performance point.
+    maxItems: 1
+
 required:
   - compatible
   - reg
   - reg-names
-  - vcca-supply
 
 unevaluatedProperties: false
 
 examples:
   - |
-     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
-     dsi-phy@ae94400 {
-         compatible = "qcom,dsi-phy-14nm";
-         reg = <0x0ae94400 0x200>,
-               <0x0ae94600 0x280>,
-               <0x0ae94a00 0x1e0>;
-         reg-names = "dsi_phy",
-                     "dsi_phy_lane",
-                     "dsi_pll";
+    dsi-phy@ae94400 {
+        compatible = "qcom,dsi-phy-14nm";
+        reg = <0x0ae94400 0x200>,
+              <0x0ae94600 0x280>,
+              <0x0ae94a00 0x1e0>;
+        reg-names = "dsi_phy",
+                    "dsi_phy_lane",
+                    "dsi_pll";
 
-         #clock-cells = <1>;
-         #phy-cells = <0>;
+        #clock-cells = <1>;
+        #phy-cells = <0>;
 
-         vcca-supply = <&vcca_reg>;
-         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&rpmhcc RPMH_CXO_CLK>;
-         clock-names = "iface", "ref";
-     };
+        vcca-supply = <&vcca_reg>;
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "ref";
+    };
 ...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
index b8de785ce815..93570052992a 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml#
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 20nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
@@ -45,26 +45,26 @@ unevaluatedProperties: false
 
 examples:
   - |
-     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
-     dsi-phy@fd922a00 {
-         compatible = "qcom,dsi-phy-20nm";
-         reg = <0xfd922a00 0xd4>,
-               <0xfd922b00 0x2b0>,
-               <0xfd922d80 0x7b>;
-         reg-names = "dsi_pll",
-                     "dsi_phy",
-                     "dsi_phy_regulator";
+    dsi-phy@fd922a00 {
+        compatible = "qcom,dsi-phy-20nm";
+        reg = <0xfd922a00 0xd4>,
+              <0xfd922b00 0x2b0>,
+              <0xfd922d80 0x7b>;
+        reg-names = "dsi_pll",
+                    "dsi_phy",
+                    "dsi_phy_regulator";
 
-         #clock-cells = <1>;
-         #phy-cells = <0>;
+        #clock-cells = <1>;
+        #phy-cells = <0>;
 
-         vcca-supply = <&vcca_reg>;
-         vddio-supply = <&vddio_reg>;
+        vcca-supply = <&vcca_reg>;
+        vddio-supply = <&vddio_reg>;
 
-         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&rpmhcc RPMH_CXO_CLK>;
-         clock-names = "iface", "ref";
-     };
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "ref";
+    };
 ...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 69eecaa64b18..371befa9f9d2 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml#
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 28nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
@@ -15,9 +15,12 @@ allOf:
 properties:
   compatible:
     enum:
+      - qcom,dsi-phy-28nm-8226
+      - qcom,dsi-phy-28nm-8937
+      - qcom,dsi-phy-28nm-8960
       - qcom,dsi-phy-28nm-hpm
+      - qcom,dsi-phy-28nm-hpm-fam-b
       - qcom,dsi-phy-28nm-lp
-      - qcom,dsi-phy-28nm-8960
 
   reg:
     items:
@@ -34,6 +37,10 @@ properties:
   vddio-supply:
     description: Phandle to vdd-io regulator device node.
 
+  qcom,dsi-phy-regulator-ldo-mode:
+    type: boolean
+    description: Indicates if the LDO mode PHY regulator is wanted.
+
 required:
   - compatible
   - reg
@@ -44,25 +51,25 @@ unevaluatedProperties: false
 
 examples:
   - |
-     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
-     dsi-phy@fd922a00 {
-         compatible = "qcom,dsi-phy-28nm-lp";
-         reg = <0xfd922a00 0xd4>,
-               <0xfd922b00 0x2b0>,
-               <0xfd922d80 0x7b>;
-         reg-names = "dsi_pll",
-                     "dsi_phy",
-                     "dsi_phy_regulator";
+    dsi-phy@fd922a00 {
+        compatible = "qcom,dsi-phy-28nm-lp";
+        reg = <0xfd922a00 0xd4>,
+              <0xfd922b00 0x2b0>,
+              <0xfd922d80 0x7b>;
+        reg-names = "dsi_pll",
+                    "dsi_phy",
+                    "dsi_phy_regulator";
 
-         #clock-cells = <1>;
-         #phy-cells = <0>;
+        #clock-cells = <1>;
+        #phy-cells = <0>;
 
-         vddio-supply = <&vddio_reg>;
+        vddio-supply = <&vddio_reg>;
 
-         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&rpmhcc RPMH_CXO_CLK>;
-         clock-names = "iface", "ref";
-     };
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "ref";
+    };
 ...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
index c851770bbdf2..1ca820a500b7 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/msm/dsi-phy-7nm.yaml#
@@ -17,7 +17,15 @@ properties:
     enum:
       - qcom,dsi-phy-7nm
       - qcom,dsi-phy-7nm-8150
+      - qcom,sa8775p-dsi-phy-5nm
+      - qcom,sar2130p-dsi-phy-5nm
       - qcom,sc7280-dsi-phy-7nm
+      - qcom,sm6375-dsi-phy-7nm
+      - qcom,sm8350-dsi-phy-5nm
+      - qcom,sm8450-dsi-phy-5nm
+      - qcom,sm8550-dsi-phy-4nm
+      - qcom,sm8650-dsi-phy-4nm
+      - qcom,sm8750-dsi-phy-3nm
 
   reg:
     items:
@@ -44,29 +52,28 @@ required:
   - compatible
   - reg
   - reg-names
-  - vdds-supply
 
 unevaluatedProperties: false
 
 examples:
   - |
-     #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
-     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
 
-     dsi-phy@ae94400 {
-         compatible = "qcom,dsi-phy-7nm";
-         reg = <0x0ae94400 0x200>,
-               <0x0ae94600 0x280>,
-               <0x0ae94900 0x260>;
-         reg-names = "dsi_phy",
-                     "dsi_phy_lane",
-                     "dsi_pll";
+    dsi-phy@ae94400 {
+        compatible = "qcom,dsi-phy-7nm";
+        reg = <0x0ae94400 0x200>,
+              <0x0ae94600 0x280>,
+              <0x0ae94900 0x260>;
+        reg-names = "dsi_phy",
+                    "dsi_phy_lane",
+                    "dsi_pll";
 
-         #clock-cells = <1>;
-         #phy-cells = <0>;
+        #clock-cells = <1>;
+        #phy-cells = <0>;
 
-         vdds-supply = <&vreg_l5a_0p88>;
-         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&rpmhcc RPMH_CXO_CLK>;
-         clock-names = "iface", "ref";
-     };
+        vdds-supply = <&vreg_l5a_0p88>;
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "iface", "ref";
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
index 502bdda90235..d0ce85a08b6d 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
@@ -1,21 +1,22 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Description of Qualcomm Display DSI PHY common dt properties
+title: Qualcomm Display DSI PHY Common Properties
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
-description: |
-  This defines the DSI PHY dt properties which are common for all
-  dsi phy versions.
+description:
+  Common properties for Qualcomm Display DSI PHY.
 
 properties:
   "#clock-cells":
     const: 1
+    description:
+      See include/dt-bindings/clock/qcom,dsi-phy-28nm.h for clock IDs.
 
   "#phy-cells":
     const: 0
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
deleted file mode 100644
index eff9daff418c..000000000000
--- a/Documentation/devicetree/bindings/display/msm/edp.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Qualcomm Technologies Inc. adreno/snapdragon eDP output
-
-Required properties:
-- compatible:
-  * "qcom,mdss-edp"
-- reg: Physical base address and length of the registers of controller and PLL
-- reg-names: The names of register regions. The following regions are required:
-  * "edp"
-  * "pll_base"
-- interrupts: The interrupt signal from the eDP block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
-  * "core"
-  * "iface"
-  * "mdp_core"
-  * "pixel"
-  * "link"
-- #clock-cells: The value should be 1.
-- vdda-supply: phandle to vdda regulator device node
-- lvl-vdd-supply: phandle to regulator device node which is used to supply power
-  to HPD receiving chip
-- panel-en-gpios: GPIO pin to supply power to panel.
-- panel-hpd-gpios: GPIO pin used for eDP hpd.
-
-
-Example:
-	mdss_edp: qcom,mdss_edp@fd923400 {
-			compatible = "qcom,mdss-edp";
-			reg-names =
-				"edp",
-				"pll_base";
-			reg =	<0xfd923400 0x700>,
-				<0xfd923a00 0xd4>;
-			interrupt-parent = <&mdss_mdp>;
-			interrupts = <12 0>;
-			power-domains = <&mmcc MDSS_GDSC>;
-			clock-names =
-				"core",
-				"pixel",
-				"iface",
-				"link",
-				"mdp_core";
-			clocks =
-				<&mmcc MDSS_EDPAUX_CLK>,
-				<&mmcc MDSS_EDPPIXEL_CLK>,
-				<&mmcc MDSS_AHB_CLK>,
-				<&mmcc MDSS_EDPLINK_CLK>,
-				<&mmcc MDSS_MDP_CLK>;
-			#clock-cells = <1>;
-			vdda-supply = <&pma8084_l12>;
-			lvl-vdd-supply = <&lvl_vreg>;
-			panel-en-gpios = <&tlmm 137 0>;
-			panel-hpd-gpios = <&tlmm 103 0>;
-	};
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
index fe55611d2603..e32056ae0f5d 100644
--- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -3,10 +3,10 @@
 %YAML 1.2
 ---
 
-$id: "http://devicetree.org/schemas/display/msm/gmu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/msm/gmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for the GMU attached to certain Adreno GPUs
+title: GMU attached to certain Adreno GPUs
 
 maintainers:
   - Rob Clark <robdclark@gmail.com>
@@ -19,43 +19,36 @@ description: |
 
 properties:
   compatible:
-    items:
-      - enum:
-          - qcom,adreno-gmu-630.2
-      - const: qcom,adreno-gmu
+    oneOf:
+      - items:
+          - pattern: '^qcom,adreno-gmu-[6-8][0-9][0-9]\.[0-9]$'
+          - const: qcom,adreno-gmu
+      - items:
+          - pattern: '^qcom,adreno-gmu-x[1-9][0-9][0-9]\.[0-9]$'
+          - const: qcom,adreno-gmu
+      - const: qcom,adreno-gmu-wrapper
 
   reg:
-    items:
-      - description: Core GMU registers
-      - description: GMU PDC registers
-      - description: GMU PDC sequence registers
+    minItems: 1
+    maxItems: 4
 
   reg-names:
-    items:
-      - const: gmu
-      - const: gmu_pdc
-      - const: gmu_pdc_seq
+    minItems: 1
+    maxItems: 4
 
   clocks:
-    items:
-      - description: GMU clock
-      - description: GPU CX clock
-      - description: GPU AXI clock
-      - description: GPU MEMNOC clock
+    minItems: 4
+    maxItems: 7
 
   clock-names:
-    items:
-      - const: gmu
-      - const: cxo
-      - const: axi
-      - const: memnoc
+    minItems: 4
+    maxItems: 7
 
   interrupts:
     items:
       - description: GMU HFI interrupt
       - description: GMU interrupt
 
-
   interrupt-names:
     items:
       - const: hfi
@@ -74,23 +67,318 @@ properties:
   iommus:
     maxItems: 1
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM
+
   operating-points-v2: true
 
+  opp-table:
+    type: object
+
 required:
   - compatible
   - reg
   - reg-names
-  - clocks
-  - clock-names
-  - interrupts
-  - interrupt-names
   - power-domains
   - power-domain-names
-  - iommus
-  - operating-points-v2
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-618.0
+              - qcom,adreno-gmu-630.2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+        clock-names:
+          items:
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-623.0
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+            - description: GPU AHB clock
+            - description: GPU HUB CX clock
+        clock-names:
+          items:
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+            - const: ahb
+            - const: hub
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-635.0
+              - qcom,adreno-gmu-660.1
+              - qcom,adreno-gmu-663.0
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+            - description: GPU AHB clock
+            - description: GPU HUB CX clock
+            - description: GPU SMMU vote clock
+        clock-names:
+          items:
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+            - const: ahb
+            - const: hub
+            - const: smmu_vote
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-640.1
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-650.2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-640.1
+              - qcom,adreno-gmu-650.2
+    then:
+      properties:
+        clocks:
+          items:
+            - description: GPU AHB clock
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+        clock-names:
+          items:
+            - const: ahb
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-730.1
+              - qcom,adreno-gmu-740.1
+              - qcom,adreno-gmu-750.1
+              - qcom,adreno-gmu-x185.1
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+        clocks:
+          items:
+            - description: GPU AHB clock
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+            - description: GMU HUB clock
+            - description: GPUSS DEMET clock
+        clock-names:
+          items:
+            - const: ahb
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+            - const: hub
+            - const: demet
+
+      required:
+        - qcom,qmp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,adreno-gmu-840.1
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+        reg-names:
+          items:
+            - const: gmu
+        clocks:
+          items:
+            - description: GPU AHB clock
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU MEMNOC clock
+            - description: GMU HUB clock
+        clock-names:
+          items:
+            - const: ahb
+            - const: gmu
+            - const: cxo
+            - const: memnoc
+            - const: hub
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,adreno-gmu-x285.1
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+        reg-names:
+          items:
+            - const: gmu
+        clocks:
+          items:
+            - description: GPU AHB clock
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU MEMNOC clock
+            - description: GMU HUB clock
+            - description: GMU RSCC HUB clock
+        clock-names:
+          items:
+            - const: ahb
+            - const: gmu
+            - const: cxo
+            - const: memnoc
+            - const: hub
+            - const: rscc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,adreno-gmu-wrapper
+    then:
+      properties:
+        reg:
+          items:
+            - description: GMU wrapper register space
+        reg-names:
+          items:
+            - const: gmu
+    else:
+      required:
+        - clocks
+        - clock-names
+        - interrupts
+        - interrupt-names
+        - iommus
+        - operating-points-v2
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
@@ -99,7 +387,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     gmu: gmu@506a000 {
-        compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+        compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
 
         reg = <0x506a000 0x30000>,
               <0xb280000 0x10000>,
@@ -123,3 +411,12 @@ examples:
         iommus = <&adreno_smmu 5>;
         operating-points-v2 = <&gmu_opp_table>;
     };
+
+    gmu_wrapper: gmu@596a000 {
+        compatible = "qcom,adreno-gmu-wrapper";
+        reg = <0x0596a000 0x30000>;
+        reg-names = "gmu";
+        power-domains = <&gpucc GPU_CX_GDSC>,
+                        <&gpucc GPU_GX_GDSC>;
+        power-domain-names = "cx", "gx";
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
index 99a1ba3ada56..826aafdcc20b 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -2,22 +2,40 @@
 %YAML 1.2
 ---
 
-$id: "http://devicetree.org/schemas/display/msm/gpu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/msm/gpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for the Adreno or Snapdragon GPUs
+title: Adreno or Snapdragon GPUs
 
 maintainers:
   - Rob Clark <robdclark@gmail.com>
 
+# dtschema does not select nodes based on pattern+const, so add custom select
+# as a work-around:
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,adreno
+          - amd,imageon
+  required:
+    - compatible
+
 properties:
   compatible:
     oneOf:
       - description: |
           The driver is parsing the compat string for Adreno to
+          figure out the chip-id.
+        items:
+          - pattern: '^qcom,adreno-[0-9a-f]{8}$'
+          - const: qcom,adreno
+      - description: |
+          The driver is parsing the compat string for Adreno to
           figure out the gpu-id and patch level.
         items:
-          - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$'
+          - pattern: '^qcom,adreno-[3-7][0-9][0-9]\.[0-9]+$'
           - const: qcom,adreno
       - description: |
           The driver is parsing the compat string for Imageon to
@@ -26,9 +44,13 @@ properties:
           - pattern: '^amd,imageon-200\.[0-1]$'
           - const: amd,imageon
 
-  clocks: true
+  clocks:
+    minItems: 2
+    maxItems: 7
 
-  clock-names: true
+  clock-names:
+    minItems: 2
+    maxItems: 7
 
   reg:
     minItems: 1
@@ -58,12 +80,15 @@ properties:
       - const: ocmem
 
   iommus:
-    maxItems: 1
+    minItems: 1
+    maxItems: 64
 
   sram:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 4
+    items:
+      maxItems: 1
     description: |
       phandles to one or more reserved on-chip SRAM regions.
       phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
@@ -79,13 +104,14 @@ properties:
 
   zap-shader:
     type: object
+    additionalProperties: false
     description: |
       For a5xx and a6xx devices this node contains a memory-region that
       points to reserved memory to store the zap shader that can be used to
       help bring the GPU out of secure mode.
     properties:
       memory-region:
-        $ref: /schemas/types.yaml#/definitions/phandle
+        maxItems: 1
 
       firmware-name:
         description: |
@@ -107,7 +133,6 @@ properties:
       For GMU attached devices a phandle to the GMU device that will
       control the power for the GPU.
 
-
 required:
   - compatible
   - reg
@@ -120,47 +145,268 @@ allOf:
       properties:
         compatible:
           contains:
-            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$'
+            oneOf:
+              - pattern: '^qcom,adreno-305\.[0-9]+$'
+              - pattern: '^qcom,adreno-330\.[0-9]+$'
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+              description: GPU Core clock
+            - const: iface
+              description: GPU Interface clock
+            - const: mem_iface
+              description: GPU Memory Interface clock
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^qcom,adreno-306\.[0-9]+$'
     then:
       properties:
         clocks:
-          minItems: 2
-          maxItems: 7
+          minItems: 5
+          maxItems: 6
+        clock-names:
+          oneOf:
+            - items:
+                - const: core
+                  description: GPU Core clock
+                - const: iface
+                  description: GPU Interface clock
+                - const: mem_iface
+                  description: GPU Memory Interface clock
+                - const: alt_mem_iface
+                  description: GPU Alternative Memory Interface clock
+                - const: gfx3d
+                  description: GPU 3D engine clock
+            - items:
+                - const: core
+                  description: GPU Core clock
+                - const: iface
+                  description: GPU Interface clock
+                - const: mem
+                  description: GPU Memory clock
+                - const: mem_iface
+                  description: GPU Memory Interface clock
+                - const: alt_mem_iface
+                  description: GPU Alternative Memory Interface clock
+                - const: gfx3d
+                  description: GPU 3D engine clock
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^qcom,adreno-320\.[0-9]+$'
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
         clock-names:
           items:
-            anyOf:
-              - const: core
-                description: GPU Core clock
-              - const: iface
-                description: GPU Interface clock
-              - const: mem
-                description: GPU Memory clock
-              - const: mem_iface
-                description: GPU Memory Interface clock
-              - const: alt_mem_iface
-                description: GPU Alternative Memory Interface clock
-              - const: gfx3d
-                description: GPU 3D engine clock
-              - const: rbbmtimer
-                description: GPU RBBM Timer for Adreno 5xx series
-          minItems: 2
+            - const: core
+              description: GPU Core clock
+            - const: iface
+              description: GPU Interface clock
+            - const: mem
+              description: GPU Memory clock
+            - const: mem_iface
+              description: GPU Memory Interface clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^qcom,adreno-405\.[0-9]+$'
+    then:
+      properties:
+        clocks:
+          minItems: 7
           maxItems: 7
+        clock-names:
+          items:
+            - const: core
+              description: GPU Core clock
+            - const: iface
+              description: GPU Interface clock
+            - const: mem
+              description: GPU Memory clock
+            - const: mem_iface
+              description: GPU Memory Interface clock
+            - const: alt_mem_iface
+              description: GPU Alternative Memory Interface clock
+            - const: gfx3d
+              description: GPU 3D engine clock
+            - const: rbbmtimer
+              description: GPU RBBM Timer for Adreno 5xx series
 
-      required:
-        - clocks
-        - clock-names
   - if:
       properties:
         compatible:
           contains:
-            pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$'
+            pattern: '^qcom,adreno-50[56]\.[0-9]+$'
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: core
+              description: GPU Core clock
+            - const: iface
+              description: GPU Interface clock
+            - const: mem_iface
+              description: GPU Memory Interface clock
+            - const: alt_mem_iface
+              description: GPU Alternative Memory Interface clock
+            - const: rbbmtimer
+              description: GPU RBBM Timer for Adreno 5xx series
+            - const: alwayson
+              description: GPU AON clock
 
-    then: # Since Adreno 6xx series clocks should be defined in GMU
+  - if:
+      properties:
+        compatible:
+          contains:
+            oneOf:
+              - pattern: '^qcom,adreno-508\.[0-9]+$'
+              - pattern: '^qcom,adreno-509\.[0-9]+$'
+              - pattern: '^qcom,adreno-512\.[0-9]+$'
+              - pattern: '^qcom,adreno-540\.[0-9]+$'
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: iface
+              description: GPU Interface clock
+            - const: rbbmtimer
+              description: GPU RBBM Timer for Adreno 5xx series
+            - const: mem
+              description: GPU Memory clock
+            - const: mem_iface
+              description: GPU Memory Interface clock
+            - const: rbcpr
+              description: GPU RB Core Power Reduction clock
+            - const: core
+              description: GPU Core clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^qcom,adreno-510\.[0-9]+$'
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: core
+              description: GPU Core clock
+            - const: iface
+              description: GPU Interface clock
+            - const: mem
+              description: GPU Memory clock
+            - const: mem_iface
+              description: GPU Memory Interface clock
+            - const: rbbmtimer
+              description: GPU RBBM Timer for Adreno 5xx series
+            - const: alwayson
+              description: GPU AON clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^qcom,adreno-530\.[0-9]+$'
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: core
+              description: GPU Core clock
+            - const: iface
+              description: GPU Interface clock
+            - const: rbbmtimer
+              description: GPU RBBM Timer for Adreno 5xx series
+            - const: mem
+              description: GPU Memory clock
+            - const: mem_iface
+              description: GPU Memory Interface clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-610.0
+              - qcom,adreno-619.1
+              - qcom,adreno-07000200
+    then:
       properties:
-        clocks: false
-        clock-names: false
+        clocks:
+          minItems: 6
+          maxItems: 6
+
+        clock-names:
+          items:
+            - const: core
+              description: GPU Core clock
+            - const: iface
+              description: GPU Interface clock
+            - const: mem_iface
+              description: GPU Memory Interface clock
+            - const: alt_mem_iface
+              description: GPU Alternative Memory Interface clock
+            - const: gmu
+              description: CX GMU clock
+            - const: xo
+              description: GPUCC clocksource clock
+
+        reg-names:
+          minItems: 1
+          items:
+            - const: kgsl_3d0_reg_memory
+            - const: cx_dbgc
+
+      required:
+        - clocks
+        - clock-names
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              oneOf:
+                - pattern: '^qcom,adreno-[67][0-9][0-9]\.[0-9]+$'
+                - pattern: '^qcom,adreno-[0-9a-f]{8}$'
+
+      then: # Starting with A6xx, the clocks are usually defined in the GMU node
+        properties:
+          clocks: false
+          clock-names: false
+
+          reg-names:
+            minItems: 1
+            items:
+              - const: kgsl_3d0_reg_memory
+              - const: cx_mem
+              - const: cx_dbgc
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
deleted file mode 100644
index 5f90a40da51b..000000000000
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Qualcomm adreno/snapdragon hdmi output
-
-Required properties:
-- compatible: one of the following
-   * "qcom,hdmi-tx-8996"
-   * "qcom,hdmi-tx-8994"
-   * "qcom,hdmi-tx-8084"
-   * "qcom,hdmi-tx-8974"
-   * "qcom,hdmi-tx-8660"
-   * "qcom,hdmi-tx-8960"
-- reg: Physical base address and length of the controller's registers
-- reg-names: "core_physical"
-- interrupts: The interrupt signal from the hdmi block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See ../clocks/clock-bindings.txt for details.
-- core-vdda-supply: phandle to supply regulator
-- hdmi-mux-supply: phandle to mux regulator
-- phys: the phandle for the HDMI PHY device
-- phy-names: the name of the corresponding PHY device
-
-Optional properties:
-- hpd-gpios: hpd pin
-- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin
-- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin
-- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin
-- power-domains: reference to the power domain(s), if available.
-- pinctrl-names: the pin control state names; should contain "default"
-- pinctrl-0: the default pinctrl state (active)
-- pinctrl-1: the "sleep" pinctrl state
-
-HDMI PHY:
-Required properties:
-- compatible: Could be the following
-  * "qcom,hdmi-phy-8660"
-  * "qcom,hdmi-phy-8960"
-  * "qcom,hdmi-phy-8974"
-  * "qcom,hdmi-phy-8084"
-  * "qcom,hdmi-phy-8996"
-- #phy-cells: Number of cells in a PHY specifier; Should be 0.
-- reg: Physical base address and length of the registers of the PHY sub blocks.
-- reg-names: The names of register regions. The following regions are required:
-  * "hdmi_phy"
-  * "hdmi_pll"
-  For HDMI PHY on msm8996, these additional register regions are required:
-    * "hdmi_tx_l0"
-    * "hdmi_tx_l1"
-    * "hdmi_tx_l3"
-    * "hdmi_tx_l4"
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- core-vdda-supply: phandle to vdda regulator device node
-
-Example:
-
-/ {
-	...
-
-	hdmi: hdmi@4a00000 {
-		compatible = "qcom,hdmi-tx-8960";
-		reg-names = "core_physical";
-		reg = <0x04a00000 0x2f0>;
-		interrupts = <GIC_SPI 79 0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names =
-		    "core",
-		    "master_iface",
-		    "slave_iface";
-		clocks =
-		    <&mmcc HDMI_APP_CLK>,
-		    <&mmcc HDMI_M_AHB_CLK>,
-		    <&mmcc HDMI_S_AHB_CLK>;
-		qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-		hdmi-mux-supply = <&ext_3p3v>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
-		pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
-
-		phys = <&hdmi_phy>;
-		phy-names = "hdmi_phy";
-	};
-
-	hdmi_phy: phy@4a00400 {
-		compatible = "qcom,hdmi-phy-8960";
-		reg-names = "hdmi_phy",
-			    "hdmi_pll";
-		reg = <0x4a00400 0x60>,
-		      <0x4a00500 0x100>;
-		#phy-cells = <0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names = "slave_iface";
-		clocks = <&mmcc HDMI_S_AHB_CLK>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
new file mode 100644
index 000000000000..dfec6c3480f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI output
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-tx-8084
+      - qcom,hdmi-tx-8660
+      - qcom,hdmi-tx-8960
+      - qcom,hdmi-tx-8974
+      - qcom,hdmi-tx-8994
+      - qcom,hdmi-tx-8996
+      - qcom,hdmi-tx-8998
+
+  clocks:
+    minItems: 1
+    maxItems: 8
+
+  clock-names:
+    minItems: 1
+    maxItems: 8
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: core_physical
+      - const: qfprom_physical
+      - const: hdcp_physical
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    enum:
+      - hdmi_phy
+      - hdmi-phy
+    deprecated: true
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+
+  hdmi-mux-supply:
+    description: phandle to mux regulator
+    deprecated: true
+
+  core-vcc-supply:
+    description: phandle to VCC supply regulator
+
+  hpd-gpios:
+    maxItems: 1
+    description: hpd pin
+
+  '#sound-dai-cells':
+    const: 1
+
+  ports:
+    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - interrupts
+  - phys
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8960
+              - qcom,hdmi-tx-8660
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: master_iface
+            - const: slave_iface
+        core-vcc-supplies: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8974
+              - qcom,hdmi-tx-8084
+              - qcom,hdmi-tx-8994
+              - qcom,hdmi-tx-8996
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: core
+            - const: alt_iface
+            - const: extp
+        hdmi-mux-supplies: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8998
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: core
+            - const: alt_iface
+            - const: extp
+            - const: bus
+            - const: mnoc
+            - const: iface_mmss
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi: hdmi@4a00000 {
+      compatible = "qcom,hdmi-tx-8960";
+      reg-names = "core_physical";
+      reg = <0x04a00000 0x2f0>;
+      interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+      clock-names = "core",
+                    "master_iface",
+                    "slave_iface";
+      clocks = <&clk 61>,
+               <&clk 72>,
+               <&clk 98>;
+      hpd-gpios = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+      hdmi-mux-supply = <&ext_3p3v>;
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
+      pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+      phys = <&hdmi_phy>;
+    };
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi@9a0000 {
+      compatible = "qcom,hdmi-tx-8996";
+      reg = <0x009a0000 0x50c>,
+            <0x00070000 0x6158>,
+            <0x009e0000 0xfff>;
+      reg-names = "core_physical",
+                  "qfprom_physical",
+                  "hdcp_physical";
+
+      interrupt-parent = <&mdss>;
+      interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&mmcc MDSS_MDP_CLK>,
+               <&mmcc MDSS_AHB_CLK>,
+               <&mmcc MDSS_HDMI_CLK>,
+               <&mmcc MDSS_HDMI_AHB_CLK>,
+               <&mmcc MDSS_EXTPCLK_CLK>;
+      clock-names = "mdp_core",
+                    "iface",
+                    "core",
+                    "alt_iface",
+                    "extp";
+
+      phys = <&hdmi_phy>;
+      #sound-dai-cells = <1>;
+
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+      pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+      core-vdda-supply = <&vreg_l12a_1p8>;
+      core-vcc-supply = <&vreg_s4a_1p8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          endpoint {
+            remote-endpoint = <&mdp5_intf3_out>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt
deleted file mode 100644
index b07eeb38f709..000000000000
--- a/Documentation/devicetree/bindings/display/msm/mdp4.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-Qualcomm adreno/snapdragon MDP4 display controller
-
-Description:
-
-This is the bindings documentation for the MDP4 display controller found in
-SoCs like MSM8960, APQ8064 and MSM8660.
-
-Required properties:
-- compatible:
-  * "qcom,mdp4" - mdp4
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The interrupt signal from the display controller.
-- clocks: device clocks
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
-  * "core_clk"
-  * "iface_clk"
-  * "bus_clk"
-  * "lut_clk"
-  * "hdmi_clk"
-  * "tv_clk"
-- ports: contains the list of output ports from MDP. These connect to interfaces
-  that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
-  special case since it is a part of the MDP block itself).
-
-  Each output port contains an endpoint that describes how it is connected to an
-  external interface. These are described by the standard properties documented
-  here:
-	Documentation/devicetree/bindings/graph.txt
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-  The output port mappings are:
-	Port 0 -> LCDC/LVDS
-	Port 1 -> DSI1 Cmd/Video
-	Port 2 -> DSI2 Cmd/Video
-	Port 3 -> DTV
-
-Optional properties:
-- clock-names: the following clocks are optional:
-  * "lut_clk"
-- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be
-  used for LCDC. This is only valid for 18bpp panels.
-
-Example:
-
-/ {
-	...
-
-	hdmi: hdmi@4a00000 {
-		...
-		ports {
-			...
-			port@0 {
-				reg = <0>;
-				hdmi_in: endpoint {
-					remote-endpoint = <&mdp_dtv_out>;
-				};
-			};
-			...
-		};
-		...
-	};
-
-	...
-
-	mdp: mdp@5100000 {
-		compatible = "qcom,mdp4";
-		reg = <0x05100000 0xf0000>;
-		interrupts = <GIC_SPI 75 0>;
-		clock-names =
-		    "core_clk",
-		    "iface_clk",
-		    "lut_clk",
-		    "hdmi_clk",
-		    "tv_clk";
-		clocks =
-		    <&mmcc MDP_CLK>,
-		    <&mmcc MDP_AHB_CLK>,
-		    <&mmcc MDP_AXI_CLK>,
-		    <&mmcc MDP_LUT_CLK>,
-		    <&mmcc HDMI_TV_CLK>,
-		    <&mmcc MDP_TV_CLK>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					mdp_lvds_out: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					mdp_dsi1_out: endpoint {
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					mdp_dsi2_out: endpoint {
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					mdp_dtv_out: endpoint {
-						remote-endpoint = <&hdmi_in>;
-					};
-				};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.yaml b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
new file mode 100644
index 000000000000..03ee09faa335
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/mdp4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon MDP4 display controller
+
+description: >
+  MDP4 display controller found in SoCs like MSM8960, APQ8064 and MSM8660.
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    const: qcom,mdp4
+
+  clocks:
+    minItems: 6
+    maxItems: 8
+
+  clock-names:
+    minItems: 6
+    items:
+      - const: core_clk
+      - const: iface_clk
+      - const: bus_clk
+      - const: lut_clk
+      - const: hdmi_clk
+      - const: tv_clk
+      - const: lcdc_clk
+      - const: pxo
+        description: XO used to drive the internal LVDS PLL
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: LCDC/LVDS
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI1 Cmd / Video
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI2 Cmd / Video
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Digital TV
+
+  qcom,lcdc-align-lsb:
+    type: boolean
+    description: >
+      Indication that LSB alignment should be used for LCDC.
+      This is only valid for 18bpp panels.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    mdp: mdp@5100000 {
+        compatible = "qcom,mdp4";
+        reg = <0x05100000 0xf0000>;
+        interrupts = <0 75 0>;
+        clock-names =
+            "core_clk",
+            "iface_clk",
+            "bus_clk",
+            "lut_clk",
+            "hdmi_clk",
+            "tv_clk";
+        clocks =
+            <&mmcc 77>,
+            <&mmcc 86>,
+            <&mmcc 102>,
+            <&mmcc 75>,
+            <&mmcc 97>,
+            <&mmcc 12>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                mdp_lvds_out: endpoint {
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                mdp_dsi1_out: endpoint {
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                mdp_dsi2_out: endpoint {
+                };
+            };
+
+            port@3 {
+                reg = <3>;
+                mdp_dtv_out: endpoint {
+                    remote-endpoint = <&hdmi_in>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
deleted file mode 100644
index 43d11279c925..000000000000
--- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-Qualcomm adreno/snapdragon MDP5 display controller
-
-Description:
-
-This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
-encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display
-controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
-
-MDSS:
-Required properties:
-- compatible:
-  * "qcom,mdss" - MDSS
-- reg: Physical base address and length of the controller's registers.
-- reg-names: The names of register regions. The following regions are required:
-  * "mdss_phys"
-  * "vbif_phys"
-- interrupts: The interrupt signal from MDSS.
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
-- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
-  * "iface"
-  * "bus"
-  * "vsync"
-- #address-cells: number of address cells for the MDSS children. Should be 1.
-- #size-cells: Should be 1.
-- ranges: parent bus address space is the same as the child bus address space.
-
-Optional properties:
-- clock-names: the following clocks are optional:
-  * "lut"
-
-MDP5:
-Required properties:
-- compatible:
-  * "qcom,mdp5" - MDP5
-- reg: Physical base address and length of the controller's registers.
-- reg-names: The names of register regions. The following regions are required:
-  * "mdp_phys"
-- interrupts: Interrupt line from MDP5 to MDSS interrupt controller.
-- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
--   * "bus"
--   * "iface"
--   * "core"
--   * "vsync"
-- ports: contains the list of output ports from MDP. These connect to interfaces
-  that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
-  special case since it is a part of the MDP block itself).
-
-  Each output port contains an endpoint that describes how it is connected to an
-  external interface. These are described by the standard properties documented
-  here:
-	Documentation/devicetree/bindings/graph.txt
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-  The availability of output ports can vary across SoC revisions:
-
-  For MSM8974 and APQ8084:
-	 Port 0 -> MDP_INTF0 (eDP)
-	 Port 1 -> MDP_INTF1 (DSI1)
-	 Port 2 -> MDP_INTF2 (DSI2)
-	 Port 3 -> MDP_INTF3 (HDMI)
-
-  For MSM8916:
-	 Port 0 -> MDP_INTF1 (DSI1)
-
-  For MSM8994 and MSM8996:
-	 Port 0 -> MDP_INTF1 (DSI1)
-	 Port 1 -> MDP_INTF2 (DSI2)
-	 Port 2 -> MDP_INTF3 (HDMI)
-
-Optional properties:
-- clock-names: the following clocks are optional:
-  * "lut"
-  * "tbu"
-  * "tbu_rt"
-
-Example:
-
-/ {
-	...
-
-	mdss: mdss@1a00000 {
-		compatible = "qcom,mdss";
-		reg = <0x1a00000 0x1000>,
-		      <0x1ac8000 0x3000>;
-		reg-names = "mdss_phys", "vbif_phys";
-
-		power-domains = <&gcc MDSS_GDSC>;
-
-		clocks = <&gcc GCC_MDSS_AHB_CLK>,
-			 <&gcc GCC_MDSS_AXI_CLK>,
-			 <&gcc GCC_MDSS_VSYNC_CLK>;
-		clock-names = "iface",
-			      "bus",
-			      "vsync"
-
-		interrupts = <0 72 0>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mdp: mdp@1a01000 {
-			compatible = "qcom,mdp5";
-			reg = <0x1a01000 0x90000>;
-			reg-names = "mdp_phys";
-
-			interrupt-parent = <&mdss>;
-			interrupts = <0 0>;
-
-			clocks = <&gcc GCC_MDSS_AHB_CLK>,
-				 <&gcc GCC_MDSS_AXI_CLK>,
-				 <&gcc GCC_MDSS_MDP_CLK>,
-				 <&gcc GCC_MDSS_VSYNC_CLK>;
-			clock-names = "iface",
-				      "bus",
-				      "core",
-				      "vsync";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					mdp5_intf1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
-					};
-				};
-			};
-		};
-
-		dsi0: dsi@1a98000 {
-			...
-			ports {
-				...
-				port@0 {
-					reg = <0>;
-					dsi0_in: endpoint {
-						remote-endpoint = <&mdp5_intf1_out>;
-					};
-				};
-				...
-			};
-			...
-		};
-
-		dsi_phy0: dsi-phy@1a98300 {
-			...
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
new file mode 100644
index 000000000000..c6305a6e0334
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/mdss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display MDSS common properties
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+# Do not select this by default, otherwise it is also selected for qcom,mdss
+# devices.
+select:
+  false
+
+properties:
+  $nodename:
+    pattern: "^display-subsystem@[0-9a-f]+$"
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    minItems: 1
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
+
+  ranges: true
+
+  # This is not a perfect description, but it's impossible to discern and match
+  # the entries like we do with interconnect-names
+  interconnects:
+    minItems: 1
+    items:
+      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+      - description: Interconnect path from mdp1 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    oneOf:
+      - minItems: 1
+        items:
+          - const: mdp0-mem
+          - const: cpu-cfg
+
+      - minItems: 2
+        items:
+          - const: mdp0-mem
+          - const: mdp1-mem
+          - const: cpu-cfg
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing a reserved framebuffer memory region.
+      For example, the splash memory region set up by the bootloader.
+
+required:
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml
new file mode 100644
index 000000000000..2329ed96e6cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml
@@ -0,0 +1,264 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,glymur-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Glymur Display MDSS
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+  Glymur MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces, etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,glymur-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,glymur-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,glymur-dp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,glymur-dp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,glymur-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+            compatible = "qcom,glymur-mdss";
+            reg = <0x0ae00000 0x1000>;
+            reg-names = "mdss";
+
+            interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+            clocks = <&dispcc_ahb_clk>,
+                     <&gcc_disp_hf_axi_clk>,
+                     <&dispcc_mdp_clk>;
+            clock-names = "bus", "nrt_bus", "core";
+
+            interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+                            <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                             &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+            interconnect-names = "mdp0-mem",
+                                 "cpu-cfg";
+
+            resets = <&disp_cc_mdss_core_bcr>;
+
+            power-domains = <&mdss_gdsc>;
+
+            iommus = <&apps_smmu 0x1c00 0x2>;
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            display-controller@ae01000 {
+                compatible = "qcom,glymur-dpu";
+                reg = <0x0ae01000 0x8f000>,
+                      <0x0aeb0000 0x2008>;
+                reg-names = "mdp", "vbif";
+
+                clocks = <&gcc_axi_clk>,
+                         <&dispcc_ahb_clk>,
+                         <&dispcc_mdp_lut_clk>,
+                         <&dispcc_mdp_clk>,
+                         <&dispcc_mdp_vsync_clk>;
+                clock-names = "nrt_bus",
+                              "iface",
+                              "lut",
+                              "core",
+                              "vsync";
+
+                assigned-clocks = <&dispcc_mdp_vsync_clk>;
+                assigned-clock-rates = <19200000>;
+
+                operating-points-v2 = <&mdp_opp_table>;
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                interrupt-parent = <&mdss>;
+                interrupts = <0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        dpu_intf1_out: endpoint {
+                            remote-endpoint = <&dsi0_in>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        dpu_intf2_out: endpoint {
+                            remote-endpoint = <&dsi1_in>;
+                        };
+                    };
+                };
+
+                mdp_opp_table: opp-table {
+                    compatible = "operating-points-v2";
+
+                    opp-200000000 {
+                        opp-hz = /bits/ 64 <200000000>;
+                        required-opps = <&rpmhpd_opp_low_svs>;
+                    };
+
+                    opp-325000000 {
+                        opp-hz = /bits/ 64 <325000000>;
+                        required-opps = <&rpmhpd_opp_svs>;
+                    };
+
+                    opp-375000000 {
+                        opp-hz = /bits/ 64 <375000000>;
+                        required-opps = <&rpmhpd_opp_svs_l1>;
+                    };
+
+                    opp-514000000 {
+                        opp-hz = /bits/ 64 <514000000>;
+                        required-opps = <&rpmhpd_opp_nom>;
+                    };
+                };
+            };
+
+            displayport-controller@ae90000 {
+                compatible = "qcom,glymur-dp";
+                reg = <0xae90000 0x200>,
+                      <0xae90200 0x200>,
+                      <0xae90400 0x600>,
+                      <0xae91000 0x400>,
+                      <0xae91400 0x400>;
+
+                interrupt-parent = <&mdss>;
+                interrupts = <12>;
+
+                clocks = <&dispcc_mdss_ahb_clk>,
+                         <&dispcc_dptx0_aux_clk>,
+                         <&dispcc_dptx0_link_clk>,
+                         <&dispcc_dptx0_link_intf_clk>,
+                         <&dispcc_dptx0_pixel0_clk>,
+                         <&dispcc_dptx0_pixel1_clk>;
+                clock-names = "core_iface",
+                              "core_aux",
+                              "ctrl_link",
+                              "ctrl_link_iface",
+                              "stream_pixel",
+                              "stream_1_pixel";
+
+                assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+                                  <&dispcc_mdss_dptx0_pixel0_clk_src>,
+                                  <&dispcc_mdss_dptx0_pixel1_clk_src>;
+                assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+                                         <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+                                         <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+                operating-points-v2 = <&mdss_dp0_opp_table>;
+
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
+                phy-names = "dp";
+
+                #sound-dai-cells = <0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        mdss_dp0_in: endpoint {
+                          remote-endpoint = <&mdss_intf0_out>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        mdss_dp0_out: endpoint {
+                        };
+                    };
+                };
+
+                mdss_dp0_opp_table: opp-table {
+                    compatible = "operating-points-v2";
+
+                    opp-160000000 {
+                        opp-hz = /bits/ 64 <160000000>;
+                        required-opps = <&rpmhpd_opp_low_svs>;
+                    };
+
+                    opp-270000000 {
+                        opp-hz = /bits/ 64 <270000000>;
+                        required-opps = <&rpmhpd_opp_svs>;
+                    };
+
+                    opp-540000000 {
+                        opp-hz = /bits/ 64 <540000000>;
+                        required-opps = <&rpmhpd_opp_svs_l1>;
+                    };
+
+                    opp-810000000 {
+                        opp-hz = /bits/ 64 <810000000>;
+                        required-opps = <&rpmhpd_opp_nom>;
+                    };
+                };
+            };
+        };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
new file mode 100644
index 000000000000..2735c78b0b67
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon Mobile Display controller (MDP5)
+
+description:
+  MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994
+  and MSM8996.
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,mdp5
+        deprecated: true
+      - items:
+          - enum:
+              - qcom,apq8084-mdp5
+              - qcom,msm8226-mdp5
+              - qcom,msm8916-mdp5
+              - qcom,msm8917-mdp5
+              - qcom,msm8937-mdp5
+              - qcom,msm8953-mdp5
+              - qcom,msm8974-mdp5
+              - qcom,msm8976-mdp5
+              - qcom,msm8994-mdp5
+              - qcom,msm8996-mdp5
+              - qcom,sdm630-mdp5
+              - qcom,sdm660-mdp5
+          - const: qcom,mdp5
+
+  $nodename:
+    pattern: '^display-controller@[0-9a-f]+$'
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: mdp_phys
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 7
+
+  clock-names:
+    oneOf:
+      - minItems: 4
+        items:
+          - const: iface
+          - const: bus
+          - const: core
+          - const: vsync
+          - const: tbu
+          - const: tbu_rt
+        # MSM8996 has additional iommu clock
+      - items:
+          - const: iface
+          - const: bus
+          - const: core
+          - const: iommu
+          - const: vsync
+
+  interconnects:
+    minItems: 1
+    items:
+      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+      - description: Interconnect path from mdp1 port to the data bus
+      - description: Interconnect path from rotator port to the data bus
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+      - const: rotator-mem
+
+  iommus:
+    items:
+      - description: apps SMMU with the Stream-ID mask for Hard-Fail port0
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: >
+      Contains the list of output ports from DPU device. These ports
+      connect to interfaces that are external to the DPU hardware,
+      such as DSI, DP etc. MDP5 devices support up to 4 ports:
+      one or two DSI ports, HDMI and eDP.
+
+    patternProperties:
+      "^port@[0-3]+$":
+        $ref: /schemas/graph.yaml#/properties/port
+
+    # at least one port is required
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    display-controller@1a01000 {
+        compatible = "qcom,mdp5";
+        reg = <0x1a01000 0x90000>;
+        reg-names = "mdp_phys";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        clocks = <&gcc GCC_MDSS_AHB_CLK>,
+                 <&gcc GCC_MDSS_AXI_CLK>,
+                 <&gcc GCC_MDSS_MDP_CLK>,
+                 <&gcc GCC_MDSS_VSYNC_CLK>;
+        clock-names = "iface",
+                      "bus",
+                      "core",
+                      "vsync";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
new file mode 100644
index 000000000000..db9c43b20e2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Mobile Display SubSystem (MDSS)
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description:
+  This is the bindings documentation for the Mobile Display Subsystem(MDSS) that
+  encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc.
+
+properties:
+  $nodename:
+    pattern: "^display-subsystem@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - qcom,mdss
+
+  reg:
+    minItems: 2
+    maxItems: 3
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: mdss_phys
+      - const: vbif_phys
+      - const: vbif_nrt_phys
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+    description: |
+      The MDSS power domain provided by GCC
+
+  clocks:
+    oneOf:
+      - minItems: 3
+        items:
+          - description: Display abh clock
+          - description: Display axi clock
+          - description: Display vsync clock
+          - description: Display core clock
+      - minItems: 1
+        items:
+          - description: Display abh clock
+          - description: Display core clock
+
+  clock-names:
+    oneOf:
+      - minItems: 3
+        items:
+          - const: iface
+          - const: bus
+          - const: vsync
+          - const: core
+      - minItems: 1
+        items:
+          - const: iface
+          - const: core
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+  interconnects:
+    minItems: 1
+    items:
+      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - power-domains
+  - clocks
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+patternProperties:
+  "^display-controller@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,mdp5
+
+  "^dsi@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,mdss-dsi-ctrl
+
+  "^phy@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        enum:
+          - qcom,dsi-phy-14nm
+          - qcom,dsi-phy-14nm-660
+          - qcom,dsi-phy-14nm-8953
+          - qcom,dsi-phy-20nm
+          - qcom,dsi-phy-28nm-8226
+          - qcom,dsi-phy-28nm-8937
+          - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-hpm-fam-b
+          - qcom,dsi-phy-28nm-lp
+          - qcom,hdmi-phy-8084
+          - qcom,hdmi-phy-8660
+          - qcom,hdmi-phy-8960
+          - qcom,hdmi-phy-8974
+          - qcom,hdmi-phy-8996
+
+  "^hdmi-tx@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        enum:
+          - qcom,hdmi-tx-8084
+          - qcom,hdmi-tx-8660
+          - qcom,hdmi-tx-8960
+          - qcom,hdmi-tx-8974
+          - qcom,hdmi-tx-8994
+          - qcom,hdmi-tx-8996
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    display-subsystem@1a00000 {
+        compatible = "qcom,mdss";
+        reg = <0x1a00000 0x1000>,
+              <0x1ac8000 0x3000>;
+        reg-names = "mdss_phys", "vbif_phys";
+
+        power-domains = <&gcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_MDSS_AHB_CLK>,
+                 <&gcc GCC_MDSS_AXI_CLK>,
+                 <&gcc GCC_MDSS_VSYNC_CLK>;
+        clock-names = "iface",
+                      "bus",
+                      "vsync";
+
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@1a01000 {
+            compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
+            reg = <0x01a01000 0x89000>;
+            reg-names = "mdp_phys";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            clocks = <&gcc GCC_MDSS_AHB_CLK>,
+                     <&gcc GCC_MDSS_AXI_CLK>,
+                     <&gcc GCC_MDSS_MDP_CLK>,
+                     <&gcc GCC_MDSS_VSYNC_CLK>;
+            clock-names = "iface",
+                      "bus",
+                      "core",
+                      "vsync";
+
+            iommus = <&apps_iommu 4>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdp5_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml
new file mode 100644
index 000000000000..d5a64c8a921f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on MSM8998
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8998-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for regdma register set
+      - description: Address offset and size for vbif register set
+      - description: Address offset and size for non-realtime vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: regdma
+      - const: vbif
+      - const: vbif_nrt
+
+  clocks:
+    items:
+      - description: Display ahb clock
+      - description: Display axi clock
+      - description: Display mem-noc clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: mnoc
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@c901000 {
+        compatible = "qcom,msm8998-dpu";
+        reg = <0x0c901000 0x8f000>,
+              <0x0c9a8e00 0xf0>,
+              <0x0c9b0000 0x2008>,
+              <0x0c9b8000 0x1040>;
+        reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+        clocks = <&mmcc MDSS_AHB_CLK>,
+                 <&mmcc MDSS_AXI_CLK>,
+                 <&mmcc MNOC_AHB_CLK>,
+                 <&mmcc MDSS_MDP_CLK>,
+                 <&mmcc MDSS_VSYNC_CLK>;
+        clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd MSM8998_VDDMX>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml
new file mode 100644
index 000000000000..2d9edab5a30d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml
@@ -0,0 +1,278 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8998 Display MDSS
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for MSM8998 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8998-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,msm8998-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,msm8998-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm-8998
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@c900000 {
+        compatible = "qcom,msm8998-mdss";
+        reg = <0x0c900000 0x1000>;
+        reg-names = "mdss";
+
+        clocks = <&mmcc MDSS_AHB_CLK>,
+                 <&mmcc MDSS_AXI_CLK>,
+                 <&mmcc MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        #address-cells = <1>;
+        #interrupt-cells = <1>;
+        #size-cells = <1>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        iommus = <&mmss_smmu 0>;
+
+        power-domains = <&mmcc MDSS_GDSC>;
+        ranges;
+
+        display-controller@c901000 {
+            compatible = "qcom,msm8998-dpu";
+            reg = <0x0c901000 0x8f000>,
+                  <0x0c9a8e00 0xf0>,
+                  <0x0c9b0000 0x2008>,
+                  <0x0c9b8000 0x1040>;
+            reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>,
+                     <&mmcc MNOC_AHB_CLK>,
+                     <&mmcc MDSS_MDP_CLK>,
+                     <&mmcc MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDMX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@c994000 {
+            compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0c994000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&mmcc MDSS_BYTE0_CLK>,
+                     <&mmcc MDSS_BYTE0_INTF_CLK>,
+                     <&mmcc MDSS_PCLK0_CLK>,
+                     <&mmcc MDSS_ESC0_CLK>,
+                     <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@c994400 {
+            compatible = "qcom,dsi-phy-10nm-8998";
+            reg = <0x0c994400 0x200>,
+                  <0x0c994600 0x280>,
+                  <0x0c994a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&pm8998_l1>;
+        };
+
+        dsi@c996000 {
+            compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0c996000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&mmcc MDSS_BYTE1_CLK>,
+                     <&mmcc MDSS_BYTE1_INTF_CLK>,
+                     <&mmcc MDSS_PCLK1_CLK>,
+                     <&mmcc MDSS_ESC1_CLK>,
+                     <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@c996400 {
+            compatible = "qcom,dsi-phy-10nm-8998";
+            reg = <0x0c996400 0x200>,
+                  <0x0c996600 0x280>,
+                  <0x0c996a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&pm8998_l1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
new file mode 100644
index 000000000000..be6cd8adb3b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on QCM2290
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcm2290-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AXI clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock from dispcc
+      - description: Display lut clock from dispcc
+      - description: Display vsync clock from dispcc
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: core
+      - const: lut
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@5e01000 {
+        compatible = "qcom,qcm2290-dpu";
+        reg = <0x05e01000 0x8f000>,
+              <0x05eb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "core", "lut", "vsync";
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd QCM2290_VDDCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
new file mode 100644
index 000000000000..f0cdb5422688
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM220 Display MDSS
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+  are mentioned for QCM2290 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcm2290-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,qcm2290-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,qcm2290-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-14nm-2290
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,qcm2290.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,qcm2290-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>,
+                        <&bimc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
+
+        iommus = <&apps_smmu 0x420 0x2>,
+                 <&apps_smmu 0x421 0x0>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,qcm2290-dpu";
+            reg = <0x05e01000 0x8f000>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "core", "lut", "vsync";
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd QCM2290_VDDCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,qcm2290-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd QCM2290_VDDCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@5e94400 {
+            compatible = "qcom,dsi-phy-14nm-2290";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+            vcca-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml
new file mode 100644
index 000000000000..e96baaae9ba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml
@@ -0,0 +1,286 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcs8300-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QCS8300 Display MDSS
+
+maintainers:
+  - Yongxing Mou <yongxing.mou@oss.qualcomm.com>
+
+description:
+  QCS8300 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces and EDP etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcs8300-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,qcs8300-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,qcs8300-dp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,qcs8300-edp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,qcs8300-gcc.h>
+    #include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
+    #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    mdss: display-subsystem@ae00000 {
+        compatible = "qcom,qcs8300-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY
+                         &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+                        <&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ACTIVE_ONLY
+                         &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+                        <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                         &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
+
+        resets = <&dispcc_core_bcr>;
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&dispcc_ahb_clk>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc_mdp_clk>;
+
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1000 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,qcs8300-dpu", "qcom,sa8775p-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+
+                    dpu_intf0_out: endpoint {
+                         remote-endpoint = <&mdss_dp0_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-500000000 {
+                    opp-hz = /bits/ 64 <500000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+
+                opp-575000000 {
+                    opp-hz = /bits/ 64 <575000000>;
+                    required-opps = <&rpmhpd_opp_turbo>;
+                };
+
+                opp-650000000 {
+                    opp-hz = /bits/ 64 <650000000>;
+                    required-opps = <&rpmhpd_opp_turbo_l1>;
+                };
+            };
+        };
+
+        mdss_dp0_phy: phy@aec2a00 {
+            compatible = "qcom,qcs8300-edp-phy", "qcom,sa8775p-edp-phy";
+
+            reg = <0x0aec2a00 0x200>,
+                  <0x0aec2200 0xd0>,
+                  <0x0aec2600 0xd0>,
+                  <0x0aec2000 0x1c8>;
+
+            clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+                     <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>;
+            clock-names = "aux",
+                          "cfg_ahb";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            vdda-phy-supply = <&vreg_l1c>;
+            vdda-pll-supply = <&vreg_l4a>;
+        };
+
+        displayport-controller@af54000 {
+            compatible = "qcom,qcs8300-dp", "qcom,sa8775p-dp";
+
+            pinctrl-0 = <&dp_hot_plug_det>;
+            pinctrl-names = "default";
+
+            reg = <0xaf54000 0x104>,
+                  <0xaf54200 0x0c0>,
+                  <0xaf55000 0x770>,
+                  <0xaf56000 0x09c>,
+                  <0xaf57000 0x09c>,
+                  <0xaf58000 0x09c>,
+                  <0xaf59000 0x09c>,
+                  <0xaf5a000 0x23c>,
+                  <0xaf5b000 0x23c>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+            clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel",
+                          "stream_1_pixel",
+                          "stream_2_pixel",
+                          "stream_3_pixel";
+            assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+                              <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+                              <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
+                              <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
+                              <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dp0_phy 0>,
+                                     <&mdss_dp0_phy 1>,
+                                     <&mdss_dp0_phy 1>,
+                                     <&mdss_dp0_phy 1>;
+            phys = <&mdss_dp0_phy>;
+            phy-names = "dp";
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    mdss_dp0_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                   reg = <1>;
+
+                   mdss_dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
new file mode 100644
index 000000000000..e2730a2f25cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sa8775p-mdss.yaml
@@ -0,0 +1,464 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sa8775p-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SA87755P Display MDSS
+
+maintainers:
+  - Mahadevan <quic_mahap@quicinc.com>
+
+description:
+  SA8775P MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces and EDP etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sa8775p-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sa8775p-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sa8775p-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sa8775p-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          enum:
+            - qcom,sa8775p-dsi-phy-5nm
+            - qcom,sa8775p-edp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sa8775p-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+                        <&mmss_noc MASTER_MDP1 &mc_virt SLAVE_EBI1>,
+                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
+
+        resets = <&dispcc_core_bcr>;
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&dispcc_ahb_clk>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc_mdp_clk>;
+
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1000 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sa8775p-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc_ahb_clk>,
+                     <&dispcc_mdp_lut_clk>,
+                     <&dispcc_mdp_clk>,
+                     <&dispcc_mdp_vsync_clk>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdp_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdss0_mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss0>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&mdss0_dp0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss0_dsi1_in>;
+                    };
+                };
+            };
+
+            mdss0_mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-500000000 {
+                    opp-hz = /bits/ 64 <500000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+
+                opp-575000000 {
+                    opp-hz = /bits/ 64 <575000000>;
+                    required-opps = <&rpmhpd_opp_turbo>;
+                };
+
+                opp-650000000 {
+                    opp-hz = /bits/ 64 <650000000>;
+                    required-opps = <&rpmhpd_opp_turbo_l1>;
+                };
+            };
+        };
+
+        mdss0_dp0_phy: phy@aec2a00 {
+            compatible = "qcom,sa8775p-edp-phy";
+
+            reg = <0x0aec2a00 0x200>,
+                  <0x0aec2200 0xd0>,
+                  <0x0aec2600 0xd0>,
+                  <0x0aec2000 0x1c8>;
+
+            clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+                     <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
+            clock-names = "aux",
+                          "cfg_ahb";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            vdda-phy-supply = <&vreg_l1c>;
+            vdda-pll-supply = <&vreg_l4a>;
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&mdss0_dsi0_phy 0>, <&mdss0_dsi0_phy 1>;
+            phys = <&mdss0_dsi0_phy>;
+
+            operating-points-v2 = <&dsi0_opp_table>;
+            power-domains = <&rpmhpd SA8775P_MMCX>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss0_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss0_dsi0_out: endpoint { };
+                };
+            };
+
+            dsi0_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss0_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sa8775p-dsi-phy-5nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x27c>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sa8775p-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&mdss0_dsi1_phy 0>, <&mdss0_dsi1_phy 1>;
+            phys = <&mdss0_dsi1_phy>;
+
+            operating-points-v2 = <&dsi1_opp_table>;
+            power-domains = <&rpmhpd SA8775P_MMCX>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss0_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss0_dsi1_out: endpoint { };
+                };
+            };
+
+            dsi1_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss0_dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sa8775p-dsi-phy-5nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x27c>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
+        displayport-controller@af54000 {
+            compatible = "qcom,sa8775p-dp";
+
+            pinctrl-0 = <&dp_hot_plug_det>;
+            pinctrl-names = "default";
+
+            reg = <0xaf54000 0x104>,
+                  <0xaf54200 0x0c0>,
+                  <0xaf55000 0x770>,
+                  <0xaf56000 0x09c>,
+                  <0xaf57000 0x09c>,
+                  <0xaf58000 0x09c>,
+                  <0xaf59000 0x09c>,
+                  <0xaf5a000 0x23c>,
+                  <0xaf5b000 0x23c>;
+
+            interrupt-parent = <&mdss0>;
+            interrupts = <12>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+                     <&dispcc_dptx0_aux_clk>,
+                     <&dispcc_dptx0_link_clk>,
+                     <&dispcc_dptx0_link_intf_clk>,
+                     <&dispcc_dptx0_pixel0_clk>,
+                     <&dispcc_dptx0_pixel1_clk>,
+                     <&dispcc_dptx0_pixel2_clk>,
+                     <&dispcc_dptx0_pixel3_clk>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel",
+                          "stream_1_pixel",
+                          "stream_2_pixel",
+                          "stream_3_pixel";
+
+            assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+                              <&dispcc_mdss_dptx0_pixel0_clk_src>,
+                              <&dispcc_mdss_dptx0_pixel1_clk_src>,
+                              <&dispcc_mdss_dptx0_pixel2_clk_src>,
+                              <&dispcc_mdss_dptx0_pixel3_clk_src>;
+            assigned-clock-parents = <&mdss0_dp0_phy 0>,
+                                     <&mdss0_dp0_phy 1>,
+                                     <&mdss0_dp0_phy 1>,
+                                     <&mdss0_dp0_phy 1>;
+
+            phys = <&mdss0_dp0_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SA8775P_MMCX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss0_dp0_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss0_dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml
new file mode 100644
index 000000000000..44c1bb9e4109
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sar2130p-mdss.yaml
@@ -0,0 +1,443 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sar2130p-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SAR2130P Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <lumag@kernel.org>
+
+description:
+  SAR2310P MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sar2130p-mdss
+
+  clocks:
+    items:
+      - description: Display MDSS AHB
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sar2130p-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sar2130p-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sar2130p-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sar2130p-dsi-phy-5nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sar2130p-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc_master_mdp &mc_virt_slave_ebi1>,
+                        <&gem_noc_master_appss_proc &config_noc_slave_display_cfg>;
+        interconnect-names = "mdp0-mem", "cpu-cfg";
+
+        resets = <&dispcc_disp_cc_mdss_core_bcr>;
+
+        power-domains = <&dispcc_mdss_gdsc>;
+
+        clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                 <&gcc_gcc_disp_ahb_clk>,
+                 <&gcc_gcc_disp_hf_axi_clk>,
+                 <&dispcc_disp_cc_mdss_mdp_clk>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sar2130p-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_gcc_disp_ahb_clk>,
+                     <&gcc_gcc_disp_hf_axi_clk>,
+                     <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&dispcc_disp_cc_mdss_mdp_lut_clk>,
+                     <&dispcc_disp_cc_mdss_mdp_clk>,
+                     <&dispcc_disp_cc_mdss_vsync_clk>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&mdss_dp0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss_dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sar2130p-dp",
+                         "qcom,sm8350-dp";
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+            clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_aux_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_link_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_link_intf_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_pixel0_clk>,
+                     <&dispcc_disp_cc_mdss_dptx0_pixel1_clk>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel",
+                          "stream_1_pixel";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_dptx0_link_clk_src>,
+                              <&dispcc_disp_cc_mdss_dptx0_pixel0_clk_src>,
+                              <&dispcc_disp_cc_mdss_dptx0_pixel1_clk_src>;
+            assigned-clock-parents = <&usb_dp_qmpphy_QMP_USB43DP_DP_LINK_CLK>,
+                                     <&usb_dp_qmpphy_QMP_USB43DP_DP_VCO_DIV_CLK>,
+                                     <&usb_dp_qmpphy_QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+            phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+            phy-names = "dp";
+
+            #sound-dai-cells = <0>;
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dp0_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dp0_out: endpoint {
+                        remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+                    };
+                };
+        };
+
+        dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-162000000 {
+                    opp-hz = /bits/ 64 <162000000>;
+                    required-opps = <&rpmhpd_opp_low_svs_d1>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sar2130p-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc_disp_cc_mdss_byte0_clk>,
+                     <&dispcc_disp_cc_mdss_byte0_intf_clk>,
+                     <&dispcc_disp_cc_mdss_pclk0_clk>,
+                     <&dispcc_disp_cc_mdss_esc0_clk>,
+                     <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&gcc_gcc_disp_hf_axi_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_byte0_clk_src>,
+                              <&dispcc_disp_cc_mdss_pclk0_clk_src>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sar2130p-dsi-phy-5nm";
+            reg = <0x0ae95000 0x200>,
+                  <0x0ae95200 0x280>,
+                  <0x0ae95500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&rpmhcc_rpmh_cxo_clk>;
+            clock-names = "iface", "ref";
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sar2130p-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc_disp_cc_mdss_byte1_clk>,
+                     <&dispcc_disp_cc_mdss_byte1_intf_clk>,
+                     <&dispcc_disp_cc_mdss_pclk1_clk>,
+                     <&dispcc_disp_cc_mdss_esc1_clk>,
+                     <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&gcc_gcc_disp_hf_axi_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_disp_cc_mdss_byte1_clk_src>,
+                              <&dispcc_disp_cc_mdss_pclk1_clk_src>;
+            assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&mdss_dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    mdss_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    mdss_dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi1_phy: phy@ae97000 {
+            compatible = "qcom,sar2130p-dsi-phy-5nm";
+            reg = <0x0ae97000 0x200>,
+                  <0x0ae97200 0x280>,
+                  <0x0ae97500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_disp_cc_mdss_ahb_clk>,
+                     <&rpmhcc_rpmh_cxo_clk>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
new file mode 100644
index 000000000000..8137618237ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SC7180
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-dpu
+      - qcom,sm6125-dpu
+      - qcom,sm6350-dpu
+      - qcom,sm6375-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    minItems: 6
+    items:
+      - description: Display hf axi clock
+      - description: Display ahb clock
+      - description: Display rotator clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+      - description: Display core throttle clock
+
+  clock-names:
+    minItems: 6
+    items:
+      - const: bus
+      - const: iface
+      - const: rot
+      - const: lut
+      - const: core
+      - const: vsync
+      - const: throttle
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm6375-dpu
+            - qcom,sm6125-dpu
+
+    then:
+      properties:
+        clocks:
+          minItems: 7
+
+        clock-names:
+          minItems: 7
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc7180-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "rot", "lut", "core",
+                      "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SC7180_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&dp_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
new file mode 100644
index 000000000000..7a0555b15ddf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
@@ -0,0 +1,322 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SC7180 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7180-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sc7180-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sc7180-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sc7180-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sc7180-mdss";
+        reg = <0xae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "ahb", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
+
+        iommus = <&apps_smmu 0x800 0x2>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc7180-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "rot", "lut", "core",
+                          "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SC7180_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC7180_CX>;
+
+            phys = <&dsi_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                    "dsi_phy_lane",
+                    "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sc7180-dp";
+
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+            clock-names = "core_iface", "core_aux", "ctrl_link",
+                          "ctrl_link_iface", "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SC7180_CX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
new file mode 100644
index 000000000000..df9ec15ad6c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SC7280
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sar2130p-dpu
+      - qcom,sc7280-dpu
+      - qcom,sc8280xp-dpu
+      - qcom,sm8350-dpu
+      - qcom,sm8450-dpu
+      - qcom,sm8550-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display ahb clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc7280-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SC7280_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&edp_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
new file mode 100644
index 000000000000..b643d3adf669
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
@@ -0,0 +1,444 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SC7280.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7280-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sc7280-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sc7280-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sc7280-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^edp@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sc7280-edp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sc7280-dsi-phy-7nm
+          - qcom,sc7280-edp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sc7280-mdss";
+        reg = <0xae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface",
+                      "ahb",
+                      "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+                        <&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
+
+        iommus = <&apps_smmu 0x900 0x402>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc7280-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&gcc GCC_DISP_SF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SC7280_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf5_out: endpoint {
+                        remote-endpoint = <&edp_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sc7280-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            phys = <&mdss_dsi_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss_dsi_phy: phy@ae94400 {
+            compatible = "qcom,sc7280-dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x280>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
+        edp@aea0000 {
+            compatible = "qcom,sc7280-edp";
+            pinctrl-names = "default";
+            pinctrl-0 = <&edp_hot_plug_det>;
+
+            reg = <0xaea0000 0x200>,
+                  <0xaea0200 0x200>,
+                  <0xaea0400 0xc00>,
+                  <0xaea1000 0x400>,
+                  <0xaea1400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <14>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+            phys = <&mdss_edp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&edp_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    edp_in: endpoint {
+                        remote-endpoint = <&dpu_intf5_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_edp_out: endpoint { };
+                };
+            };
+
+            edp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        mdss_edp_phy: phy@aec2a00 {
+            compatible = "qcom,sc7280-edp-phy";
+
+            reg = <0xaec2a00 0x19c>,
+                  <0xaec2200 0xa0>,
+                  <0xaec2600 0xa0>,
+                  <0xaec2000 0x1c0>;
+
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_EDP_CLKREF_EN>;
+            clock-names = "aux",
+                          "cfg_ahb";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sc7280-dp";
+
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-dpu.yaml
new file mode 100644
index 000000000000..a411126708b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-dpu.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8180x-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8180X Display DPU
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8180x-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Display HF AXI clock
+      - description: Display core clock
+      - description: Display vsync clock
+      - description: Display rotator clock
+      - description: Display LUT clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+      - const: rot
+      - const: lut
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc8180x.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc8180x-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
+        clock-names = "iface",
+                      "bus",
+                      "core",
+                      "vsync",
+                      "rot",
+                      "lut";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SC8180X_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-mdss.yaml
new file mode 100644
index 000000000000..00e82bdbbcc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8180x-mdss.yaml
@@ -0,0 +1,359 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8180x-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8180X Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SC8180X target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sc8180x-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sc8180x-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sc8180x-dp
+          - qcom,sc8180x-edp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sc8180x-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc8180x.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sc8180x-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>,
+                        <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x800 0x420>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc8180x-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>;
+            clock-names = "iface",
+                          "bus",
+                          "core",
+                          "vsync",
+                          "rot",
+                          "lut";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SC8180X_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-171428571 {
+                    opp-hz = /bits/ 64 <171428571>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sc8180x-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC8180X_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sc8180x-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC8180X_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
new file mode 100644
index 000000000000..af79406e1604
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Mobile Display Subsystem
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sc8280xp-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sc8280xp-dp
+          - qcom,sc8280xp-edp
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sc8280xp-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc0 MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface",
+                      "ahb",
+                      "core";
+
+        resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+                        <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        iommus = <&apps_smmu 0x1000 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc8280xp-dpu";
+            reg = <0x0ae01000 0x8f000>,
+            <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&gcc GCC_DISP_SF_AXI_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdss0_mdp_opp_table>;
+            power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+            interrupt-parent = <&mdss0>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp0_in>;
+                    };
+                };
+
+                port@4 {
+                    reg = <4>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp1_in>;
+                    };
+                };
+
+                port@5 {
+                    reg = <5>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp3_in>;
+                    };
+                };
+
+                port@6 {
+                    reg = <6>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp2_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
new file mode 100644
index 000000000000..7dc269322b8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
@@ -0,0 +1,292 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm670-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Display MDSS
+
+maintainers:
+  - Richard Acayan <mailingradian@gmail.com>
+
+description:
+  SDM670 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm670-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm670-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm670-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sdm670-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sdm670-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+                        <&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        iommus = <&apps_smmu 0x880 0x8>,
+                 <&apps_smmu 0xc80 0x8>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sdm670-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SDM670_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss_dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM670_CX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM670_CX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
new file mode 100644
index 000000000000..dc11fd421a27
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SDM845
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm670-dpu
+      - qcom,sdm845-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display GCC bus clock
+      - description: Display ahb clock
+      - description: Display axi clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: gcc-bus
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sdm845-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SDM845_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml
new file mode 100644
index 000000000000..6e8b69e5ec62
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml
@@ -0,0 +1,288 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SDM845 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm845-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm845-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm845-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sdm845-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sdm845-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x880 0x8>,
+                 <&apps_smmu 0xc80 0x8>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sdm845-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SDM845_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM845_CX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM845_CX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
new file mode 100644
index 000000000000..510eb6c19364
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SM6115
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6115-dpu
+
+  reg:
+    items:
+      - description: MDP register set
+      - description: VBIF register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AXI
+      - description: Display AHB
+      - description: Display core
+      - description: Display lut
+      - description: Display rotator
+      - description: Display vsync
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: core
+      - const: lut
+      - const: rot
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@5e01000 {
+        compatible = "qcom,sm6115-dpu";
+        reg = <0x05e01000 0x8f000>,
+              <0x05eb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd SM6115_VDDCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
new file mode 100644
index 000000000000..309de1953c88
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
@@ -0,0 +1,203 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+  are mentioned for SM6115 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6115-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm6115-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: qcom,sm6115-dsi-ctrl
+              - const: qcom,mdss-dsi-ctrl
+          - description: Old binding, please don't use
+            deprecated: true
+            const: qcom,dsi-ctrl-6g-qcm2290
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-14nm-2290
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sm6115-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x420 0x2>,
+                 <&apps_smmu 0x421 0x0>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,sm6115-dpu";
+            reg = <0x05e01000 0x8f000>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd SM6115_VDDCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd SM6115_VDDCX>;
+            phys = <&dsi0_phy>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@5e94400 {
+            compatible = "qcom,dsi-phy-14nm-2290";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
new file mode 100644
index 000000000000..3deb9dc81c9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6125-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6125 Display MDSS
+
+maintainers:
+  - Marijn Suijten <marijn.suijten@somainline.org>
+
+description:
+  SM6125 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6125-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm6125-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm6125-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm6125-dsi-phy-14nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm6125.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        compatible = "qcom,sm6125-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface",
+                      "ahb",
+                      "core";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        iommus = <&apps_smmu 0x400 0x0>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,sm6125-dpu";
+            reg = <0x05e01000 0x83208>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                     <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+            clock-names = "bus",
+                          "iface",
+                          "rot",
+                          "lut",
+                          "core",
+                          "vsync",
+                          "throttle";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd SM6125_VDDCX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                      <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd SM6125_VDDCX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        phy@5e94400 {
+            compatible = "qcom,sm6125-dsi-phy-14nm";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface",
+                          "ref";
+
+            required-opps = <&rpmpd_opp_nom>;
+            power-domains = <&rpmpd SM6125_VDDMX>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-dpu.yaml
new file mode 100644
index 000000000000..b4f437172218
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-dpu.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6150-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6150 Display DPU
+
+maintainers:
+  - Abhinav Kumar <quic_abhinavk@quicinc.com>
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6150-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display ahb clock
+      - description: Display hf axi clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm6150-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&dispcc_mdss_ahb_clk>,
+                 <&gcc_disp_hf_axi_clk>,
+                 <&dispcc_mdss_mdp_clk>,
+                 <&dispcc_mdss_vsync_clk>;
+        clock-names = "iface", "bus", "core", "vsync";
+
+        assigned-clocks = <&dispcc_mdss_vsync_clk>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd RPMHPD_CX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf0_out: endpoint {
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dpu_intf1_out: endpoint {
+                  remote-endpoint = <&mdss_dsi0_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-19200000 {
+              opp-hz = /bits/ 64 <19200000>;
+              required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-25600000 {
+              opp-hz = /bits/ 64 <25600000>;
+              required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-307200000 {
+              opp-hz = /bits/ 64 <307200000>;
+              required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml
new file mode 100644
index 000000000000..46e9335f849f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml
@@ -0,0 +1,255 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6150-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6150 Display MDSS
+
+maintainers:
+  - Abhinav Kumar <quic_abhinavk@quicinc.com>
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SM6150 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm6150-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm6150-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm6150-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm6150-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm6150-dsi-phy-14nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,qcs615-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sm6150-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS
+                         &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+                        <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                         &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+        interconnect-names = "mdp0-mem", "cpu-cfg";
+
+        power-domains = <&dispcc_mdss_gdsc>;
+
+        clocks = <&dispcc_mdss_ahb_clk>,
+                 <&gcc_disp_hf_axi_clk>,
+                 <&dispcc_mdss_mdp_clk>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x800 0x0>;
+
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm6150-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+                     <&gcc_disp_hf_axi_clk>,
+                     <&dispcc_mdss_mdp_clk>,
+                     <&dispcc_mdss_vsync_clk>;
+            clock-names = "iface", "bus", "core", "vsync";
+
+            assigned-clocks = <&dispcc_mdss_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_CX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    dpu_intf0_out: endpoint {
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-192000000 {
+                    opp-hz = /bits/ 64 <192000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-256000000 {
+                    opp-hz = /bits/ 64 <256000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-307200000 {
+                    opp-hz = /bits/ 64 <307200000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm6150-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc_mdss_byte0_clk>,
+                     <&dispcc_mdss_byte0_intf_clk>,
+                     <&dispcc_mdss_pclk0_clk>,
+                     <&dispcc_mdss_esc0_clk>,
+                     <&dispcc_mdss_ahb_clk>,
+                     <&gcc_disp_hf_axi_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_mdss_byte0_clk_src>,
+                              <&dispcc_mdss_pclk0_clk_src>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>,
+                                     <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi0_opp_table>;
+
+            phys = <&mdss_dsi0_phy>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi0_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-164000000 {
+                    opp-hz = /bits/ 64 <164000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sm6150-dsi-phy-14nm";
+            reg = <0x0ae94400 0x100>,
+                  <0x0ae94500 0x300>,
+                  <0x0ae94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
new file mode 100644
index 000000000000..bba666bdffe5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
@@ -0,0 +1,225 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  SM6350 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6350-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm6350-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm6350-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm6350-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm6350-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x800 0x2>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm6350-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+              <&dispcc DISP_CC_MDSS_AHB_CLK>,
+              <&dispcc DISP_CC_MDSS_ROT_CLK>,
+              <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+              <&dispcc DISP_CC_MDSS_MDP_CLK>,
+              <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "rot", "lut", "core",
+                    "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                              <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                              <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                              <&dispcc DISP_CC_MDSS_AHB_CLK>;
+            assigned-clock-rates = <300000000>,
+                                   <19200000>,
+                                   <19200000>,
+                                   <19200000>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM6350_CX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm6350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM6350_MX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
new file mode 100644
index 000000000000..e22b4c433fd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6375 Display MDSS
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  SM6375 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm6375-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm6375-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm6375-dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,sm6375-dispcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        compatible = "qcom,sm6375-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "ahb", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x820 0x2>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,sm6375-dpu";
+            reg = <0x05e01000 0x8e030>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+                     <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+            clock-names = "bus",
+                          "iface",
+                          "rot",
+                          "lut",
+                          "core",
+                          "vsync",
+                          "throttle";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd SM6375_VDDCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,sm6375-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd SM6375_VDDMX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@5e94400 {
+            compatible = "qcom,sm6375-dsi-phy-7nm";
+            reg = <0x05e94400 0x200>,
+                  <0x05e94600 0x280>,
+                  <0x05e94900 0x264>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml
new file mode 100644
index 000000000000..c79b2d442800
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM7150 Display Processing Unit (DPU)
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm7150-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display ahb clock
+      - description: Display rotator clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: rot
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm7150-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc_disp_hf_axi_clk>,
+                 <&dispcc_mdss_ahb_clk>,
+                 <&dispcc_mdss_rot_clk>,
+                 <&dispcc_mdss_mdp_lut_clk>,
+                 <&dispcc_mdss_mdp_clk>,
+                 <&dispcc_mdss_vsync_clk>;
+        clock-names = "bus",
+                      "iface",
+                      "rot",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc_mdss_vsync_clk>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd RPMHPD_CX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&mdss_dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dpu_intf2_out: endpoint {
+                    remote-endpoint = <&mdss_dsi1_in>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                dpu_intf0_out: endpoint {
+                    remote-endpoint = <&dp_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-19200000 {
+                opp-hz = /bits/ 64 <19200000>;
+                required-opps = <&rpmhpd_opp_min_svs>;
+            };
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-300000000 {
+                opp-hz = /bits/ 64 <300000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-344000000 {
+                opp-hz = /bits/ 64 <344000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-430000000 {
+                opp-hz = /bits/ 64 <430000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm7150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-mdss.yaml
new file mode 100644
index 000000000000..9b0621d88d50
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-mdss.yaml
@@ -0,0 +1,464 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM7150 Display MDSS
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+description:
+  SM7150 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm7150-mdss
+
+  clocks:
+    items:
+      - description: Display ahb clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from mdp1 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm7150-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm7150-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm7150-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,sm7150-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm7150-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc_mdss_gdsc>;
+
+        clocks = <&dispcc_mdss_ahb_clk>,
+                 <&gcc_disp_hf_axi_clk>,
+                 <&gcc_disp_sf_axi_clk>,
+                 <&dispcc_mdss_mdp_clk>;
+        clock-names = "iface",
+                      "bus",
+                      "nrt_bus",
+                      "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 QCOM_ICC_TAG_ALWAYS
+                         &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+                        <&mmss_noc MASTER_MDP_PORT1 QCOM_ICC_TAG_ALWAYS
+                         &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+                        <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+                         &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
+
+        iommus = <&apps_smmu 0x800 0x440>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm7150-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_disp_hf_axi_clk>,
+                     <&dispcc_mdss_ahb_clk>,
+                     <&dispcc_mdss_rot_clk>,
+                     <&dispcc_mdss_mdp_lut_clk>,
+                     <&dispcc_mdss_mdp_clk>,
+                     <&dispcc_mdss_vsync_clk>;
+            clock-names = "bus",
+                          "iface",
+                          "rot",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdss_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_CX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss_dsi1_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-19200000 {
+                    opp-hz = /bits/ 64 <19200000>;
+                    required-opps = <&rpmhpd_opp_min_svs>;
+                };
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-344000000 {
+                    opp-hz = /bits/ 64 <344000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-430000000 {
+                    opp-hz = /bits/ 64 <430000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm7150-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc_mdss_byte0_clk>,
+                     <&dispcc_mdss_byte0_intf_clk>,
+                     <&dispcc_mdss_pclk0_clk>,
+                     <&dispcc_mdss_esc0_clk>,
+                     <&dispcc_mdss_ahb_clk>,
+                     <&gcc_disp_hf_axi_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_mdss_byte0_clk_src>,
+                              <&dispcc_mdss_pclk0_clk_src>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>,
+                                     <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_CX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-180000000 {
+                    opp-hz = /bits/ 64 <180000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-275000000 {
+                    opp-hz = /bits/ 64 <275000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vdda_mipi_dsi0_pll>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm7150-dsi-ctrl",
+                         "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc_mdss_byte1_clk>,
+                     <&dispcc_mdss_byte1_intf_clk>,
+                     <&dispcc_mdss_pclk1_clk>,
+                     <&dispcc_mdss_esc1_clk>,
+                     <&dispcc_mdss_ahb_clk>,
+                     <&gcc_disp_hf_axi_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_mdss_byte1_clk_src>,
+                              <&dispcc_mdss_pclk1_clk_src>;
+            assigned-clock-parents = <&mdss_dsi1_phy 0>,
+                                     <&mdss_dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_CX>;
+
+            phys = <&mdss_dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vdda_mipi_dsi1_pll>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sm7150-dp",
+                         "qcom,sm8350-dp";
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+                     <&dispcc_mdss_dp_aux_clk>,
+                     <&dispcc_mdss_dp_link_clk>,
+                     <&dispcc_mdss_dp_link_intf_clk>,
+                     <&dispcc_mdss_dp_pixel_clk>,
+                     <&dispcc_mdss_dp_pixel1_clk>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel",
+                          "stream_1_pixel";
+
+            assigned-clocks = <&dispcc_mdss_dp_link_clk_src>,
+                              <&dispcc_mdss_dp_pixel_clk_src>,
+                              <&dispcc_mdss_dp_pixel1_clk_src>;
+            assigned-clock-parents = <&dp_phy 0>,
+                                     <&dp_phy 1>,
+                                     <&dp_phy 1>;
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_CX>;
+
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint {
+                    };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml
new file mode 100644
index 000000000000..a88d22f30a60
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 Display DPU
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8150-dpu
+      - qcom,sm8250-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display ahb clock
+      - description: Display hf axi clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8150.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8150-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "iface", "bus", "core", "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SM8150_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
new file mode 100644
index 000000000000..e6dc5494baee
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
@@ -0,0 +1,347 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SM8150 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm8150-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm8150-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm8150-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8150-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-7nm-8150
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8150.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8150-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x800 0x420>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8150-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "core", "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM8150_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-171428571 {
+                    opp-hz = /bits/ 64 <171428571>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8150_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-7nm-8150";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8150_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-7nm-8150";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
new file mode 100644
index 000000000000..51368cda7b2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -0,0 +1,350 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SM8250 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8250-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm8250-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8250-dp
+          - const: qcom,sm8350-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8250-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-7nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8250-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x820 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8250-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "core", "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
new file mode 100644
index 000000000000..68176de854b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -0,0 +1,244 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display MDSS
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description:
+  MSM Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm8350-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from the MDP0 port to the data bus
+      - description: Interconnect path from the MDP1 port to the data bus
+      - description: Interconnect path from the CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm8350-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm8350-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8350-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm8350-dsi-phy-5nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,sm8350.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8350-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+                        <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>,
+                        <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                         &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+        interconnect-names = "mdp0-mem", "mdp1-mem", "cpu-cfg";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        iommus = <&apps_smmu 0x820 0x402>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8350-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&gcc GCC_DISP_SF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi0: dsi@ae94000 {
+            compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                      "byte_intf",
+                      "pixel",
+                      "core",
+                      "iface",
+                      "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                          <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>,
+                                 <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&mdss_dsi0_phy>;
+
+            ports {
+             #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
new file mode 100644
index 000000000000..747a2e9665f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -0,0 +1,364 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  SM8450 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8450-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display sf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm8450-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8450-dp
+          - const: qcom,sm8350-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8450-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm8450-dsi-phy-5nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8450-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
+                        <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
+                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
+
+        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x2800 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8450-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                    <&gcc GCC_DISP_SF_AXI_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                    <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-172000000{
+                    opp-hz = /bits/ 64 <172000000>;
+                    required-opps = <&rpmhpd_opp_low_svs_d1>;
+                };
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-500000000 {
+                    opp-hz = /bits/ 64 <500000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160310000{
+                    opp-hz = /bits/ 64 <160310000>;
+                    required-opps = <&rpmhpd_opp_low_svs_d1>;
+                };
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sm8450-dsi-phy-5nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sm8450-dsi-phy-5nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
new file mode 100644
index 000000000000..59192c59ddb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
@@ -0,0 +1,353 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display MDSS
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  SM8550 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8550-mdss
+
+  clocks:
+    items:
+      - description: Display MDSS AHB
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm8550-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8550-dp
+          - const: qcom,sm8350-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8550-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sm8550-dsi-phy-4nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8550-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP 0 &mc_virt SLAVE_EBI1 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_DISPLAY_CFG 0>;
+        interconnect-names = "mdp0-mem", "cpu-cfg";
+
+        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8550-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AHB_CLK>,
+                    <&gcc GCC_DISP_HF_AXI_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                    <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sm8550-dsi-phy-4nm";
+            reg = <0x0ae95000 0x200>,
+                  <0x0ae95200 0x280>,
+                  <0x0ae95500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sm8550-dsi-phy-4nm";
+            reg = <0x0ae97000 0x200>,
+                  <0x0ae97200 0x280>,
+                  <0x0ae97500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
new file mode 100644
index 000000000000..fe296e3186d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 Display DPU
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,glymur-dpu
+          - qcom,sa8775p-dpu
+          - qcom,sm8650-dpu
+          - qcom,sm8750-dpu
+          - qcom,x1e80100-dpu
+      - items:
+          - enum:
+              - qcom,qcs8300-dpu
+          - const: qcom,sa8775p-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi
+      - description: Display MDSS ahb
+      - description: Display lut
+      - description: Display core
+      - description: Display vsync
+
+  clock-names:
+    items:
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8650-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc_axi_clk>,
+                 <&dispcc_ahb_clk>,
+                 <&dispcc_mdp_lut_clk>,
+                 <&dispcc_mdp_clk>,
+                 <&dispcc_vsync_clk>;
+        clock-names = "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc_vsync_clk>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dpu_intf2_out: endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-325000000 {
+                opp-hz = /bits/ 64 <325000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-375000000 {
+                opp-hz = /bits/ 64 <375000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-514000000 {
+                opp-hz = /bits/ 64 <514000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml
new file mode 100644
index 000000000000..a1c53e191033
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml
@@ -0,0 +1,341 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8650-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 Display MDSS
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8650-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm8650-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm8650-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8650-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm8650-dsi-phy-4nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+    #include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8650-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP 0 &mc_virt SLAVE_EBI1 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_DISPLAY_CFG 0>;
+        interconnect-names = "mdp0-mem", "cpu-cfg";
+
+        resets = <&dispcc_core_bcr>;
+
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&gcc_ahb_clk>,
+                 <&gcc_axi_clk>,
+                 <&dispcc_mdp_clk>;
+        clock-names = "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8650-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_axi_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&dispcc_mdp_lut_clk>,
+                     <&dispcc_mdp_clk>,
+                     <&dispcc_mdp_vsync_clk>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdp_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sm8650-dsi-phy-4nm";
+            reg = <0x0ae95000 0x200>,
+                  <0x0ae95200 0x280>,
+                  <0x0ae95500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispc_byte_clk>,
+                     <&dispcc_intf_clk>,
+                     <&dispcc_pclk>,
+                     <&dispcc_esc_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&gcc_bus_clk>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc_byte_clk>,
+                              <&dispcc_pclk>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sm8650-dsi-phy-4nm";
+            reg = <0x0ae97000 0x200>,
+                  <0x0ae97200 0x280>,
+                  <0x0ae97500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc_iface_clk>,
+                     <&rpmhcc_ref_clk>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml
new file mode 100644
index 000000000000..d55fda9a523e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml
@@ -0,0 +1,474 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8750-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8750 Display MDSS
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8750-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm8750-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm8750-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,sm8750-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,sm8750-dsi-phy-3nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+            compatible = "qcom,sm8750-mdss";
+            reg = <0x0ae00000 0x1000>;
+            reg-names = "mdss";
+
+            interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+            clocks = <&disp_cc_mdss_ahb_clk>,
+                     <&gcc_disp_hf_axi_clk>,
+                     <&disp_cc_mdss_mdp_clk>;
+
+            interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+                            <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                             &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+            interconnect-names = "mdp0-mem",
+                                 "cpu-cfg";
+
+            resets = <&disp_cc_mdss_core_bcr>;
+
+            power-domains = <&mdss_gdsc>;
+
+            iommus = <&apps_smmu 0x800 0x2>;
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            display-controller@ae01000 {
+                compatible = "qcom,sm8750-dpu";
+                reg = <0x0ae01000 0x93000>,
+                      <0x0aeb0000 0x2008>;
+                reg-names = "mdp",
+                            "vbif";
+
+                interrupts-extended = <&mdss 0>;
+
+                clocks = <&gcc_disp_hf_axi_clk>,
+                         <&disp_cc_mdss_ahb_clk>,
+                         <&disp_cc_mdss_mdp_lut_clk>,
+                         <&disp_cc_mdss_mdp_clk>,
+                         <&disp_cc_mdss_vsync_clk>;
+                clock-names = "nrt_bus",
+                              "iface",
+                              "lut",
+                              "core",
+                              "vsync";
+
+                assigned-clocks = <&disp_cc_mdss_vsync_clk>;
+                assigned-clock-rates = <19200000>;
+
+                operating-points-v2 = <&mdp_opp_table>;
+
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        dpu_intf1_out: endpoint {
+                            remote-endpoint = <&mdss_dsi0_in>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        dpu_intf2_out: endpoint {
+                            remote-endpoint = <&mdss_dsi1_in>;
+                        };
+                    };
+
+                    port@2 {
+                        reg = <2>;
+
+                        dpu_intf0_out: endpoint {
+                            remote-endpoint = <&mdss_dp0_in>;
+                        };
+                    };
+                };
+
+                mdp_opp_table: opp-table {
+                    compatible = "operating-points-v2";
+
+                    opp-207000000 {
+                        opp-hz = /bits/ 64 <207000000>;
+                        required-opps = <&rpmhpd_opp_low_svs>;
+                    };
+
+                    opp-337000000 {
+                        opp-hz = /bits/ 64 <337000000>;
+                        required-opps = <&rpmhpd_opp_svs>;
+                    };
+
+                    opp-417000000 {
+                        opp-hz = /bits/ 64 <417000000>;
+                        required-opps = <&rpmhpd_opp_svs_l1>;
+                    };
+
+                    opp-532000000 {
+                        opp-hz = /bits/ 64 <532000000>;
+                        required-opps = <&rpmhpd_opp_nom>;
+                    };
+
+                    opp-575000000 {
+                        opp-hz = /bits/ 64 <575000000>;
+                        required-opps = <&rpmhpd_opp_nom_l1>;
+                    };
+                };
+            };
+
+            dsi@ae94000 {
+                compatible = "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+                reg = <0x0ae94000 0x400>;
+                reg-names = "dsi_ctrl";
+
+                interrupts-extended = <&mdss 4>;
+
+                clocks = <&disp_cc_mdss_byte0_clk>,
+                         <&disp_cc_mdss_byte0_intf_clk>,
+                         <&disp_cc_mdss_pclk0_clk>,
+                         <&disp_cc_mdss_esc0_clk>,
+                         <&disp_cc_mdss_ahb_clk>,
+                         <&gcc_disp_hf_axi_clk>,
+                         <&mdss_dsi0_phy 1>,
+                         <&mdss_dsi0_phy 0>,
+                         <&disp_cc_esync0_clk>,
+                         <&disp_cc_osc_clk>,
+                         <&disp_cc_mdss_byte0_clk_src>,
+                         <&disp_cc_mdss_pclk0_clk_src>;
+                clock-names = "byte",
+                              "byte_intf",
+                              "pixel",
+                              "core",
+                              "iface",
+                              "bus",
+                              "dsi_pll_pixel",
+                              "dsi_pll_byte",
+                              "esync",
+                              "osc",
+                              "byte_src",
+                              "pixel_src";
+
+                operating-points-v2 = <&mdss_dsi_opp_table>;
+
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                phys = <&mdss_dsi0_phy>;
+                phy-names = "dsi";
+
+                vdda-supply = <&vreg_l3g_1p2>;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        mdss_dsi0_in: endpoint {
+                            remote-endpoint = <&dpu_intf1_out>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        mdss_dsi0_out: endpoint {
+                            remote-endpoint = <&panel0_in>;
+                            data-lanes = <0 1 2 3>;
+                        };
+                    };
+                };
+
+                mdss_dsi_opp_table: opp-table {
+                    compatible = "operating-points-v2";
+
+                    opp-187500000 {
+                        opp-hz = /bits/ 64 <187500000>;
+                        required-opps = <&rpmhpd_opp_low_svs>;
+                    };
+
+                    opp-300000000 {
+                        opp-hz = /bits/ 64 <300000000>;
+                        required-opps = <&rpmhpd_opp_svs>;
+                    };
+
+                    opp-358000000 {
+                        opp-hz = /bits/ 64 <358000000>;
+                        required-opps = <&rpmhpd_opp_svs_l1>;
+                    };
+                };
+            };
+
+            mdss_dsi0_phy: phy@ae95000 {
+                compatible = "qcom,sm8750-dsi-phy-3nm";
+                reg = <0x0ae95000 0x200>,
+                      <0x0ae95200 0x280>,
+                      <0x0ae95500 0x400>;
+                reg-names = "dsi_phy",
+                            "dsi_phy_lane",
+                            "dsi_pll";
+
+                clocks = <&disp_cc_mdss_ahb_clk>,
+                         <&rpmhcc RPMH_CXO_CLK>;
+                clock-names = "iface",
+                              "ref";
+
+                vdds-supply = <&vreg_l3i_0p88>;
+
+                #clock-cells = <1>;
+                #phy-cells = <0>;
+            };
+
+            dsi@ae96000 {
+                compatible = "qcom,sm8750-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+                reg = <0x0ae96000 0x400>;
+                reg-names = "dsi_ctrl";
+
+                interrupts-extended = <&mdss 5>;
+
+                clocks = <&disp_cc_mdss_byte1_clk>,
+                         <&disp_cc_mdss_byte1_intf_clk>,
+                         <&disp_cc_mdss_pclk1_clk>,
+                         <&disp_cc_mdss_esc1_clk>,
+                         <&disp_cc_mdss_ahb_clk>,
+                         <&gcc_disp_hf_axi_clk>,
+                         <&mdss_dsi1_phy 1>,
+                         <&mdss_dsi1_phy 0>,
+                         <&disp_cc_esync1_clk>,
+                         <&disp_cc_osc_clk>,
+                         <&disp_cc_mdss_byte1_clk_src>,
+                         <&disp_cc_mdss_pclk1_clk_src>;
+                clock-names = "byte",
+                              "byte_intf",
+                              "pixel",
+                              "core",
+                              "iface",
+                              "bus",
+                              "dsi_pll_pixel",
+                              "dsi_pll_byte",
+                              "esync",
+                              "osc",
+                              "byte_src",
+                              "pixel_src";
+
+                operating-points-v2 = <&mdss_dsi_opp_table>;
+
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                phys = <&mdss_dsi1_phy>;
+                phy-names = "dsi";
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        mdss_dsi1_in: endpoint {
+                            remote-endpoint = <&dpu_intf2_out>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        mdss_dsi1_out: endpoint {
+                        };
+                    };
+                };
+            };
+
+            mdss_dsi1_phy: phy@ae97000 {
+                compatible = "qcom,sm8750-dsi-phy-3nm";
+                reg = <0x0ae97000 0x200>,
+                      <0x0ae97200 0x280>,
+                      <0x0ae97500 0x400>;
+                reg-names = "dsi_phy",
+                            "dsi_phy_lane",
+                            "dsi_pll";
+
+                clocks = <&disp_cc_mdss_ahb_clk>,
+                         <&rpmhcc RPMH_CXO_CLK>;
+                clock-names = "iface",
+                              "ref";
+
+                #clock-cells = <1>;
+                #phy-cells = <0>;
+            };
+
+            displayport-controller@af54000 {
+                compatible = "qcom,sm8750-dp", "qcom,sm8650-dp";
+                reg = <0xaf54000 0x104>,
+                      <0xaf54200 0xc0>,
+                      <0xaf55000 0x770>,
+                      <0xaf56000 0x9c>,
+                      <0xaf57000 0x9c>;
+
+                interrupts-extended = <&mdss 12>;
+
+                clocks = <&disp_cc_mdss_ahb_clk>,
+                         <&disp_cc_mdss_dptx0_aux_clk>,
+                         <&disp_cc_mdss_dptx0_link_clk>,
+                         <&disp_cc_mdss_dptx0_link_intf_clk>,
+                         <&disp_cc_mdss_dptx0_pixel0_clk>,
+                         <&disp_cc_mdss_dptx0_pixel1_clk>;
+                clock-names = "core_iface",
+                              "core_aux",
+                              "ctrl_link",
+                              "ctrl_link_iface",
+                              "stream_pixel",
+                              "stream_1_pixel";
+
+                assigned-clocks = <&disp_cc_mdss_dptx0_link_clk_src>,
+                                  <&disp_cc_mdss_dptx0_pixel0_clk_src>,
+                                  <&disp_cc_mdss_dptx0_pixel1_clk_src>;
+                assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+                                         <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+                                         <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+                operating-points-v2 = <&dp_opp_table>;
+
+                power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+                phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
+                phy-names = "dp";
+
+                #sound-dai-cells = <0>;
+
+                dp_opp_table: opp-table {
+                    compatible = "operating-points-v2";
+
+                    opp-192000000 {
+                        opp-hz = /bits/ 64 <192000000>;
+                        required-opps = <&rpmhpd_opp_low_svs_d1>;
+                    };
+
+                    opp-270000000 {
+                        opp-hz = /bits/ 64 <270000000>;
+                        required-opps = <&rpmhpd_opp_low_svs>;
+                    };
+
+                    opp-540000000 {
+                        opp-hz = /bits/ 64 <540000000>;
+                        required-opps = <&rpmhpd_opp_svs_l1>;
+                    };
+
+                    opp-810000000 {
+                        opp-hz = /bits/ 64 <810000000>;
+                        required-opps = <&rpmhpd_opp_nom>;
+                    };
+                };
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        mdss_dp0_in: endpoint {
+                            remote-endpoint = <&dpu_intf0_out>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        mdss_dp0_out: endpoint {
+                            remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+                        };
+                    };
+                };
+            };
+        };
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml
new file mode 100644
index 000000000000..8d698a2e055a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,x1e80100-mdss.yaml
@@ -0,0 +1,255 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,x1e80100-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 Display MDSS
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+  X1E80100 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DP interfaces, etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,x1e80100-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    maxItems: 3
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: qcom,x1e80100-dp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+    #include <dt-bindings/phy/phy-qcom-qmp.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,x1e80100-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+                        <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_DISPLAY_CFG 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem", "cpu-cfg";
+
+        resets = <&dispcc_core_bcr>;
+
+        power-domains = <&dispcc_gdsc>;
+
+        clocks = <&dispcc_ahb_clk>,
+                 <&gcc_disp_hf_axi_clk>,
+                 <&dispcc_mdp_clk>;
+        clock-names = "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,x1e80100-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc_axi_clk>,
+                     <&dispcc_ahb_clk>,
+                     <&dispcc_mdp_lut_clk>,
+                     <&dispcc_mdp_clk>,
+                     <&dispcc_mdp_vsync_clk>;
+            clock-names = "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc_mdp_vsync_clk>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,x1e80100-dp";
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0x600>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc_mdss_ahb_clk>,
+               <&dispcc_dptx0_aux_clk>,
+               <&dispcc_dptx0_link_clk>,
+               <&dispcc_dptx0_link_intf_clk>,
+               <&dispcc_dptx0_pixel0_clk>,
+               <&dispcc_dptx0_pixel1_clk>;
+            clock-names = "core_iface", "core_aux",
+                    "ctrl_link",
+                    "ctrl_link_iface",
+                    "stream_pixel",
+                    "stream_1_pixel";
+
+            assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>,
+                  <&dispcc_mdss_dptx0_pixel0_clk_src>,
+                  <&dispcc_mdss_dptx0_pixel1_clk_src>;
+            assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+                  <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+                  <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+            operating-points-v2 = <&mdss_dp0_opp_table>;
+
+            power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+            phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>;
+            phy-names = "dp";
+
+            #sound-dai-cells = <0>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                  reg = <0>;
+
+                  mdss_dp0_in: endpoint {
+                    remote-endpoint = <&mdss_intf0_out>;
+                  };
+              };
+
+              port@1 {
+                  reg = <1>;
+
+                  mdss_dp0_out: endpoint {
+                  };
+              };
+            };
+
+            mdss_dp0_opp_table: opp-table {
+              compatible = "operating-points-v2";
+
+              opp-160000000 {
+                 opp-hz = /bits/ 64 <160000000>;
+                 required-opps = <&rpmhpd_opp_low_svs>;
+              };
+
+              opp-270000000 {
+                 opp-hz = /bits/ 64 <270000000>;
+                 required-opps = <&rpmhpd_opp_svs>;
+              };
+
+              opp-540000000 {
+                 opp-hz = /bits/ 64 <540000000>;
+                 required-opps = <&rpmhpd_opp_svs_l1>;
+              };
+
+              opp-810000000 {
+                 opp-hz = /bits/ 64 <810000000>;
+                 required-opps = <&rpmhpd_opp_nom>;
+              };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
index a108029ecfab..0aa2d3fbadaa 100644
--- a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
@@ -6,24 +6,23 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: abt,y030xx067a
 
+  reg:
+    maxItems: 1
+
   backlight: true
   port: true
   power-supply: true
-  reg: true
   reset-gpios: true
 
 required:
diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
index 93878c2cd370..f6fea9085aab 100644
--- a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: advantech,idk-1110wr
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: advantech,idk-1110wr
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   data-mapping:
     const: jeida-24
@@ -35,6 +45,11 @@ additionalProperties: false
 
 required:
   - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
index 67682fe77f10..05ca3b2385f8 100644
--- a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
@@ -19,6 +19,10 @@ description: |
   second port, therefore the ports must be marked accordingly (with either
   dual-lvds-odd-pixels or dual-lvds-even-pixels).
 
+allOf:
+  - $ref: /schemas/display/lvds-dual-ports.yaml#
+  - $ref: panel-common.yaml#
+
 properties:
   compatible:
     items:
@@ -41,22 +45,10 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/$defs/port-base
-        unevaluatedProperties: false
-        description: The sink for odd pixels.
-        properties:
-          dual-lvds-odd-pixels: true
-
         required:
           - dual-lvds-odd-pixels
 
       port@1:
-        $ref: /schemas/graph.yaml#/$defs/port-base
-        unevaluatedProperties: false
-        description: The sink for even pixels.
-        properties:
-          dual-lvds-even-pixels: true
-
         required:
           - dual-lvds-even-pixels
 
@@ -72,7 +64,6 @@ required:
   - height-mm
   - data-mapping
   - panel-timing
-  - ports
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-plus-panel.yaml b/Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-plus-panel.yaml
new file mode 100644
index 000000000000..1d67492ebd3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-plus-panel.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/anbernic,rg35xx-plus-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Anbernic RG35XX series (WL-355608-A8) 3.5" 640x480 24-bit IPS LCD panel
+
+maintainers:
+  - Ryan Walklin <ryan@testtoast.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: anbernic,rg35xx-plus-panel
+      - items:
+          - enum:
+              - anbernic,rg35xx-2024-panel
+              - anbernic,rg35xx-h-panel
+              - anbernic,rg35xx-sp-panel
+          - const: anbernic,rg35xx-plus-panel
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "anbernic,rg35xx-plus-panel";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14
+
+            backlight = <&backlight>;
+            power-supply = <&reg_lcd>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&tcon_lcd0_out_lcd>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/apple,summit.yaml b/Documentation/devicetree/bindings/display/panel/apple,summit.yaml
new file mode 100644
index 000000000000..f081755325e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/apple,summit.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/apple,summit.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple "Summit" display panel
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description:
+  An OLED panel used as a touchbar on certain Apple laptops.
+  Contains a backlight device, which controls brightness of the panel itself.
+  The backlight common properties are included for this reason
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/leds/backlight/common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,j293-summit
+          - apple,j493-summit
+      - const: apple,summit
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - max-brightness
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "apple,j293-summit", "apple,summit";
+            reg = <0>;
+            max-brightness = <255>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&dfr_bridge_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
new file mode 100644
index 000000000000..4ad484f09ba3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,rtsm-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm RTSM Virtual Platforms Display
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: arm,rtsm-display
+
+  port: true
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
index be69e0cc50fc..c9958f824d9a 100644
--- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
+++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -37,9 +37,6 @@ examples:
         compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
         reg = <0x00000 0x1000>;
 
-        #address-cells = <1>;
-        #size-cells = <0>;
-
         panel {
             compatible = "arm,versatile-tft-panel";
 
diff --git a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
index 75a09df68ba0..dd614e077bbf 100644
--- a/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
+++ b/Documentation/devicetree/bindings/display/panel/asus,z00t-tm5p5-nt35596.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ASUS Z00T TM5P5 NT35596 5.5" 1080×1920 LCD Panel
 
 maintainers:
-  - Konrad Dybcio <konradybcio@gmail.com>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |+
   This panel seems to only be found in the Asus Z00T
@@ -21,7 +21,10 @@ allOf:
 properties:
   compatible:
     const: asus,z00t-tm5p5-n35596
-  reg: true
+
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   vdd-supply:
     description: core voltage supply
diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
new file mode 100644
index 000000000000..86c834eb4d98
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+description: |
+  Delta RGB 8-bit panel found in some Retrogame handhelds
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: auo,a030jtn01
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "auo,a030jtn01";
+            reg = <0>;
+
+            spi-max-frequency = <10000000>;
+
+            reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+            power-supply = <&lcd_power>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml
new file mode 100644
index 000000000000..8b7448ad9138
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED
+  video mode panel module on MIPI-DSI 4-Lane interface, GGRB
+  pixel arrangement, 63 micrometers pitch, with an active
+  area of 68.04 x 136.08 millimeters.
+  Each pixel is divided into red and green dots, or blue and
+  green dots, and two pixels share red or blue dots which are
+  arranged in vertical stripe.
+  The DriverIC for this panel module is SW43404.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: boe,bf060y8m-aj0
+
+  reg:
+    maxItems: 1
+
+  elvdd-supply:
+    description: EL Driving positive (VDD) supply (4.40-4.80V)
+  elvss-supply:
+    description: EL Driving negative (VSS) supply (-5.00V to -1.40V)
+  vcc-supply:
+    description: Core (TSP) voltage supply (2.70-3.60V)
+  vci-supply:
+    description: DriverIC Operation supply (2.60-3.60V)
+  vddio-supply:
+    description: I/O voltage supply (1.62-1.98V)
+
+  port: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - elvdd-supply
+  - elvss-supply
+  - vcc-supply
+  - vci-supply
+  - vddio-supply
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,bf060y8m-aj0";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            vcc-supply = <&disp_vcc_vreg>;
+            vddio-supply = <&disp_vddio_vreg>;
+            vci-supply = <&disp_vci_vreg>;
+            elvdd-supply = <&disp_elvdd_vreg>;
+            elvss-supply = <&disp_elvss_vreg>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
index 272a3a018a33..f2496cdd9260 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
@@ -18,9 +18,11 @@ properties:
       - const: boe,himax8279d8p
       - const: boe,himax8279d10p
 
+  reg:
+    maxItems: 1
+
   backlight: true
   enable-gpios: true
-  reg: true
 
   pp33-gpios:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/panel/boe,td4320.yaml b/Documentation/devicetree/bindings/display/panel/boe,td4320.yaml
new file mode 100644
index 000000000000..c6bff0ece360
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,td4320.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,td4320.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TD4320 MIPI-DSI panels
+
+maintainers:
+  - Barnabas Czeman <barnabas.czeman@mainlining.org>
+
+description:
+  BOE TD4320 6.3" 1080x2340 panel found in Xiaomi Redmi Note 7 smartphone.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: boe,td4320
+
+  reg:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O voltage rail
+
+  vsn-supply:
+    description: Negative source voltage rail
+
+  vsp-supply:
+    description: Positive source voltage rail
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "boe,td4320";
+            reg = <0>;
+            backlight = <&backlight>;
+            reset-gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml
new file mode 100644
index 000000000000..6a82bd1ec763
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,th101mb31ig002-28a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TH101MB31IG002-28A WXGA DSI Display Panel
+
+maintainers:
+  - Manuel Traut <manut@mecka.net>
+
+properties:
+  compatible:
+    enum:
+        # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
+      - boe,th101mb31ig002-28a
+        # The Starry-er88577 is a 10.1" WXGA TFT-LCD panel
+      - starry,er88577
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  enable-gpios: true
+  reset-gpios: true
+  power-supply: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - power-supply
+
+allOf:
+  - $ref: panel-common.yaml#
+  - if:
+      properties:
+        compatible:
+          # The Starry-er88577 is a 10.1" WXGA TFT-LCD panel
+          const: starry,er88577
+    then:
+      properties:
+        reset-gpios: false
+    else:
+      required:
+        - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,th101mb31ig002-28a";
+            reg = <0>;
+            backlight = <&backlight_lcd0>;
+            enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 55 GPIO_ACTIVE_LOW>;
+            rotation = <90>;
+            power-supply = <&vcc_3v3>;
+            port {
+                panel_in_dsi: endpoint {
+                    remote-endpoint = <&dsi_out_con>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-ll2.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-ll2.yaml
new file mode 100644
index 000000000000..dced98e1c69a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-ll2.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-ll2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TV101WUM-LL2 DSI Display Panel
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: boe,tv101wum-ll2
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  backlight: true
+  reset-gpios: true
+  vsp-supply: true
+  vsn-supply: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vsp-supply
+  - vsn-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,tv101wum-ll2";
+            reg = <0>;
+
+            vsn-supply = <&vsn_lcd>;
+            vsp-supply = <&vsp_lcd>;
+
+            reset-gpios = <&pio 45 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index a2384bd74cf2..7a9f49e40e75 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -30,9 +30,13 @@ properties:
       - boe,tv110c9m-ll3
         # INX HJ110IZ-01A 10.95" WUXGA TFT LCD panel
       - innolux,hj110iz-01a
+        # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel
+      - starry,2081101qfh032011-53g
+        # STARRY ili9882t 10.51" WUXGA TFT LCD panel
+      - starry,ili9882t
 
   reg:
-    description: the virtual channel number of a DSI peripheral
+    maxItems: 1
 
   enable-gpios:
     description: a GPIO spec for the enable pin
@@ -53,6 +57,7 @@ properties:
     description: phandle of the backlight device attached to the panel
 
   port: true
+  rotation: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
index 56903ded005e..dc5f7e36e30b 100644
--- a/Documentation/devicetree/bindings/display/panel/display-timings.yaml
+++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: display timings bindings
+title: display timings
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
@@ -31,8 +31,7 @@ properties:
 patternProperties:
   "^timing":
     type: object
-    allOf:
-      - $ref: panel-timing.yaml#
+    $ref: panel-timing.yaml#
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
new file mode 100644
index 000000000000..80deedc01c7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ebbg,ft8719.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EBBG FT8719 MIPI-DSI LCD panel
+
+maintainers:
+  - Joel Selvaraj <jo@jsfamily.in>
+
+description: |
+  The FT8719 panel from EBBG is a FHD+ LCD display panel with a resolution
+  of 1080x2246. It is a video mode DSI panel. The backlight is managed
+  through the QCOM WLED driver.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: ebbg,ft8719
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel of the peripheral
+
+  vddio-supply:
+    description: power IC supply regulator
+
+  vddpos-supply:
+    description: positive boost supply regulator
+
+  vddneg-supply:
+    description: negative boost supply regulator
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vddpos-supply
+  - vddneg-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      panel@0 {
+        compatible = "ebbg,ft8719";
+        reg = <0>;
+
+        vddio-supply = <&vreg_l14a_1p88>;
+        vddpos-supply = <&lab>;
+        vddneg-supply = <&ibb>;
+
+        reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+        backlight = <&pmi8998_wled>;
+
+        port {
+          ebbg_ft8719_in_0: endpoint {
+            remote-endpoint = <&dsi0_out>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
index 7adb83e2e8d9..f4cb825d1e96 100644
--- a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
+++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
@@ -15,9 +15,14 @@ allOf:
 properties:
   compatible:
     const: elida,kd35t133
-  reg: true
+
+  reg:
+    maxItems: 1
+
   backlight: true
+  port: true
   reset-gpios: true
+  rotation: true
   iovcc-supply:
     description: regulator that supplies the iovcc voltage
   vdd-supply:
@@ -27,6 +32,7 @@ required:
   - compatible
   - reg
   - backlight
+  - port
   - iovcc-supply
   - vdd-supply
 
@@ -43,6 +49,12 @@ examples:
             backlight = <&backlight>;
             iovcc-supply = <&vcc_1v8>;
             vdd-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml
new file mode 100644
index 000000000000..9847da784cc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/fascontek,fs035vg158.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/fascontek,fs035vg158.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fascontek FS035VG158 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - John Watts <contact@jookia.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: fascontek,fs035vg158
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "fascontek,fs035vg158";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
index 81adb82f061d..0d8707a5844d 100644
--- a/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
+++ b/Documentation/devicetree/bindings/display/panel/feixin,k101-im2ba02.yaml
@@ -15,7 +15,10 @@ allOf:
 properties:
   compatible:
     const: feixin,k101-im2ba02
-  reg: true
+
+  reg:
+    maxItems: 1
+
   backlight: true
   reset-gpios: true
   avdd-supply:
diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
index 95acf9e96f1c..92df69e80a82 100644
--- a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -26,6 +26,7 @@ properties:
   dvdd-supply:
     description: 3v3 digital regulator
 
+  port: true
   reset-gpios: true
 
   backlight: true
@@ -35,7 +36,7 @@ required:
   - reg
   - avdd-supply
   - dvdd-supply
-  - reset-gpios
+  - port
 
 additionalProperties: false
 
@@ -54,5 +55,11 @@ examples:
             dvdd-supply = <&reg_dldo2>;
             reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
             backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
new file mode 100644
index 000000000000..d54e96b2a9e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/focaltech,gpt3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Focaltech GPT3 3.0" (640x480 pixels) IPS LCD panel
+
+maintainers:
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: focaltech,gpt3
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "focaltech,gpt3";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml
new file mode 100644
index 000000000000..f619aea82bdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx8279.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX8279/HX8279-D based MIPI-DSI panels
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The Himax HX8279 is a 1803 channel outputs source driver with MIPI
+  TCON, which generates the horizontal and vertical control timing to
+  the source and gate drivers.
+  This DriverIC is most suitable for 1200x1920, 1080x1920, 1200x1600,
+  and 600x1024 panels and outputs full RGB888 over two or four lanes,
+  single or dual, MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aoly,sl101pm1794fog-v15
+          - startek,kd070fhfid078
+      - const: himax,hx8279
+
+  reg:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O voltage supply
+
+  vdd-supply:
+    description: Panel power supply
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - reset-gpios
+  - iovcc-supply
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "startek,kd070fhfid078", "himax,hx8279";
+            reg = <0>;
+            backlight = <&backlight>;
+            enable-gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+            iovcc-supply = <&vreg_lcm_vio>;
+            vdd-supply = <&vreg_lcm_vdd>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml
new file mode 100644
index 000000000000..e4c1aa5deab9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx83102.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83102 MIPI-DSI LCD panel controller
+
+maintainers:
+  - Cong Yang <yangcong5@huaqin.corp-partner.google.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # Boe nv110wum-l60 11.0" WUXGA TFT LCD panel
+          - boe,nv110wum-l60
+          # CSOT pna957qt1-1 10.95" WUXGA TFT LCD panel
+          - csot,pna957qt1-1
+          # IVO t109nw41 11.0" WUXGA TFT LCD panel
+          - ivo,t109nw41
+          # KINGDISPLAY KD110N11-51IE 10.95" WUXGA TFT LCD panel
+          - kingdisplay,kd110n11-51ie
+          # STARRY 2082109QFH040022-50E 10.95" WUXGA TFT LCD panel
+          - starry,2082109qfh040022-50e
+          # STARRY himax83102-j02 10.51" WUXGA TFT LCD panel
+          - starry,himax83102-j02
+      - const: himax,hx83102
+
+  reg:
+    description: the virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: a GPIO spec for the enable pin
+
+  pp1800-supply:
+    description: core voltage supply
+
+  avdd-supply:
+    description: phandle of the regulator that provides positive voltage
+
+  avee-supply:
+    description: phandle of the regulator that provides negative voltage
+
+  backlight: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - pp1800-supply
+  - avdd-supply
+  - avee-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "starry,himax83102-j02", "himax,hx83102";
+            reg = <0>;
+            enable-gpios = <&pio 45 0>;
+            avdd-supply = <&ppvarn_lcd>;
+            avee-supply = <&ppvarp_lcd>;
+            pp1800-supply = <&pp1800_lcd>;
+            backlight = <&backlight_lcd0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml
new file mode 100644
index 000000000000..56bcd152f43c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx83112a.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83112a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83112A-based DSI display panels
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  The Himax HX83112A is a generic DSI Panel IC used to control
+  LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: djn,9a-3r063-1102b
+
+  reg:
+    maxItems: 1
+
+  vdd1-supply:
+    description: Digital voltage rail
+
+  vsn-supply:
+    description: Positive source voltage rail
+
+  vsp-supply:
+    description: Negative source voltage rail
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd1-supply
+  - vsn-supply
+  - vsp-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "djn,9a-3r063-1102b";
+            reg = <0>;
+
+            backlight = <&pm6150l_wled>;
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            vdd1-supply = <&vreg_l1e>;
+            vsn-supply = <&pm6150l_lcdb_ncp>;
+            vsp-supply = <&pm6150l_lcdb_ldo>;
+
+            port {
+                panel_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx83112b.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx83112b.yaml
new file mode 100644
index 000000000000..e58bb3d45331
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx83112b.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx83112b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX83112B-based DSI display panels
+
+maintainers:
+  - Luca Weiss <luca@lucaweiss.eu>
+
+description:
+  The Himax HX83112B is a generic DSI Panel IC used to control
+  LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    contains:
+      const: djn,98-03057-6598b-i
+
+  reg:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O voltage rail
+
+  vsn-supply:
+    description: Positive source voltage rail
+
+  vsp-supply:
+    description: Negative source voltage rail
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - iovcc-supply
+  - vsn-supply
+  - vsp-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "djn,98-03057-6598b-i";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+            iovcc-supply = <&pm8953_l6>;
+            vsn-supply = <&pmi632_lcdb_ncp>;
+            vsp-supply = <&pmi632_lcdb_ldo>;
+
+            port {
+                panel_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
new file mode 100644
index 000000000000..5725a587e35c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX8394 MIPI-DSI LCD panel controller
+
+maintainers:
+  - Ondrej Jirman <megi@xff.cz>
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+description:
+  Device tree bindings for panels based on the Himax HX8394 controller,
+  such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with
+  a MIPI-DSI video interface.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - hannstar,hsd060bhw4
+              - microchip,ac40t08a-mipi-panel
+              - powkiddy,x55-panel
+          - const: himax,hx8394
+      - items:
+          - enum:
+              - huiling,hl055fhav028c
+          - const: himax,hx8399c
+
+  reg:
+    maxItems: 1
+
+  reset-gpios: true
+
+  backlight: true
+
+  rotation: true
+
+  port: true
+
+  vcc-supply:
+    description: Panel power supply
+
+  iovcc-supply:
+    description: I/O voltage supply
+
+required:
+  - compatible
+  - reg
+  - backlight
+  - port
+  - vcc-supply
+  - iovcc-supply
+
+additionalProperties: false
+
+allOf:
+  - $ref: panel-common.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - microchip,ac40t08a-mipi-panel
+    then:
+      required:
+        - reset-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "hannstar,hsd060bhw4", "himax,hx8394";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/hydis,hv101hd1.yaml b/Documentation/devicetree/bindings/display/panel/hydis,hv101hd1.yaml
new file mode 100644
index 000000000000..f429e84ee65d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/hydis,hv101hd1.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/hydis,hv101hd1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hydis HV101HD1 DSI Display Panel
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: hydis,hv101hd1
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vio-supply: true
+
+  backlight: true
+  port: true
+
+required:
+  - compatible
+  - vdd-supply
+  - vio-supply
+  - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "hydis,hv101hd1";
+            reg = <0>;
+
+            vdd-supply = <&vdd_lcd>;
+            vio-supply = <&vddio_lcd>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml
new file mode 100644
index 000000000000..02f7fb1f16dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,il79900a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek IL79900a based MIPI-DSI panels
+
+maintainers:
+  - Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - tianma,tl121bvms07-00
+      - const: ilitek,il79900a
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel used by the panel
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO specifier for the enable pin
+
+  avdd-supply:
+    description: Positive analog voltage supply (AVDD)
+
+  avee-supply:
+    description: Negative analog voltage supply (AVEE)
+
+  pp1800-supply:
+    description: 1.8V logic voltage supply
+
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - avdd-supply
+  - avee-supply
+  - pp1800-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "tianma,tl121bvms07-00", "ilitek,il79900a";
+            reg = <0>;
+            enable-gpios = <&pio 25 0>;
+            avdd-supply = <&reg_avdd>;
+            avee-supply = <&reg_avee>;
+            pp1800-supply = <&reg_pp1800>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml
new file mode 100644
index 000000000000..ef5a2240b684
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9163 display panels
+
+maintainers:
+  - Daniel Mack <daniel@zonque.org>
+
+description:
+  This binding is for display panels using an Ilitek ILI9163 controller in SPI
+  mode.
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - newhaven,1.8-128160EF
+      - const: ilitek,ili9163
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 32000000
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            display@0 {
+                    compatible = "newhaven,1.8-128160EF", "ilitek,ili9163";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+                    rotation = <180>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
index e89c1ea62ffa..44423465f6e3 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
@@ -15,11 +15,9 @@ description: |
   960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
   VCOMH outputs.
 
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -28,6 +26,9 @@ properties:
           - dlink,dir-685-panel
       - const: ilitek,ili9322
 
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   port: true
 
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
index 20ce88ab4b3a..5f41758c96d5 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
@@ -16,16 +16,20 @@ description: |
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     items:
       - enum:
+          - adafruit,yx240qv29
           # ili9341 240*320 Color on stm32f429-disco board
           - st,sf-tc240t-9370-t
+          - canaan,kd233-tft
       - const: ilitek,ili9341
 
-  reg: true
+  reg:
+    maxItems: 1
 
   dc-gpios:
     maxItems: 1
@@ -47,32 +51,50 @@ properties:
   vddi-led-supply:
     description: Voltage supply for the LED driver (1.65 .. 3.3 V)
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
   - reg
   - dc-gpios
-  - port
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,sf-tc240t-9370-t
+then:
+  required:
+    - port
 
 examples:
   - |+
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
         panel: display@0 {
-                 compatible = "st,sf-tc240t-9370-t",
-                              "ilitek,ili9341";
-                 reg = <0>;
-                 spi-3wire;
-                 spi-max-frequency = <10000000>;
-                 dc-gpios = <&gpiod 13 0>;
-                 port {
-                         panel_in: endpoint {
-                           remote-endpoint = <&display_out>;
-                      };
-                 };
-             };
+            compatible = "st,sf-tc240t-9370-t",
+                         "ilitek,ili9341";
+            reg = <0>;
+            spi-3wire;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpiod 13 0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
         };
+        display@1{
+            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+            rotation = <270>;
+            backlight = <&backlight>;
+        };
+    };
 ...
-
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
new file mode 100644
index 000000000000..ff67129c9466
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9805.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9805 based MIPI-DSI panels
+
+maintainers:
+  - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - giantplus,gpm1790a0
+          - tianma,tm041xdhg01
+      - const: ilitek,ili9805
+
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+  dvdd-supply: true
+
+required:
+  - compatible
+  - avdd-supply
+  - dvdd-supply
+  - reg
+  - reset-gpios
+  - port
+  - backlight
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "giantplus,gpm1790a0", "ilitek,ili9805";
+            reg = <0>;
+            avdd-supply = <&avdd_display>;
+            dvdd-supply = <&dvdd_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
new file mode 100644
index 000000000000..f80307579485
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9806E based MIPI-DSI panels
+
+maintainers:
+  - Michael Walle <mwalle@kernel.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - densitron,dmt028vghmcmi-1d
+          - ortustech,com35h3p70ulc
+      - const: ilitek,ili9806e
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vccio-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vccio-supply
+  - reset-gpios
+  - backlight
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "ortustech,com35h3p70ulc", "ilitek,ili9806e";
+            reg = <0>;
+            vdd-supply = <&reg_vdd_panel>;
+            vccio-supply = <&reg_vccio_panel>;
+            reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
index b2fcec4f22fd..d979701a00a8 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
@@ -9,24 +9,38 @@ title: Ilitek ILI9881c based MIPI-DSI panels
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
+allOf:
+  - $ref: panel-common.yaml#
+
 properties:
   compatible:
     items:
       - enum:
+          - ampire,am8001280g
           - bananapi,lhr050h41
+          - bestar,bsd1218-a101kl68
           - feixin,k101-im2byl02
+          - raspberrypi,dsi-5inch
+          - raspberrypi,dsi-7inch
+          - startek,kd050hdfia020
+          - tdo,tl050hdv35
+          - wanchanglong,w552946aaa
+          - wanchanglong,w552946aba
       - const: ilitek,ili9881c
 
+  reg:
+    maxItems: 1
+
   backlight: true
+  port: true
   power-supply: true
-  reg: true
   reset-gpios: true
+  rotation: true
 
 required:
   - compatible
   - power-supply
   - reg
-  - reset-gpios
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
index a69681e724cb..ab6b7be88341 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
@@ -11,15 +11,26 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: innolux,ee101ia-01d
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: innolux,ee101ia-01d
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   backlight: true
+  data-mapping: true
   enable-gpios: true
   power-supply: true
   width-mm: true
@@ -27,5 +38,13 @@ properties:
   panel-timing: true
   port: true
 
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
 additionalProperties: false
 ...
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
index cda36c04e85c..c7df9a7f6589 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
@@ -6,24 +6,23 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: innolux,ej030na
 
+  reg:
+    maxItems: 1
+
   backlight: true
   port: true
   power-supply: true
-  reg: true
   reset-gpios: true
 
 required:
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml
index 5a5f071627fb..4164e3f7061d 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.yaml
@@ -16,9 +16,11 @@ properties:
   compatible:
     const: innolux,p097pfg
 
+  reg:
+    maxItems: 1
+
   backlight: true
   enable-gpios: true
-  reg: true
 
   avdd-supply:
     description: The regulator that provides positive voltage
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
deleted file mode 100644
index 243dac2416f3..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
+++ /dev/null
@@ -1,43 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/panel/innolux,p120zdg-bf1.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
-
-maintainers:
-  - Sandeep Panda <spanda@codeaurora.org>
-  - Douglas Anderson <dianders@chromium.org>
-
-allOf:
-  - $ref: panel-common.yaml#
-
-properties:
-  compatible:
-    const: innolux,p120zdg-bf1
-
-  enable-gpios: true
-  power-supply: true
-  backlight: true
-  no-hpd: true
-
-required:
-  - compatible
-  - power-supply
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/gpio/gpio.h>
-
-    panel_edp: panel-edp {
-        compatible = "innolux,p120zdg-bf1";
-        enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
-        power-supply = <&pm8916_l2>;
-        backlight = <&backlight>;
-        no-hpd;
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml
new file mode 100644
index 000000000000..b8783eba3ddc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jadard,jd9365da-h3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Jadard JD9365DA-HE WXGA DSI panel
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - chongzhou,cz101b4001
+          - kingdisplay,kd101ne3-40ti
+          - melfas,lmfbx101117480
+          - radxa,display-10hd-ad001
+          - radxa,display-8hd-ad002
+      - const: jadard,jd9365da-h3
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: supply regulator for VDD, usually 3.3V
+
+  vccio-supply:
+    description: supply regulator for VCCIO, usually 1.8V
+
+  reset-gpios: true
+
+  backlight: true
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vccio-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "chongzhou,cz101b4001", "jadard,jd9365da-h3";
+            reg = <0>;
+            vdd-supply = <&lcd_3v3>;
+            vccio-supply = <&vcca_1v8>;
+            reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml
new file mode 100644
index 000000000000..a8621459005b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lpm102a188a.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lpm102a188a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI LPM102A188A 2560x1800 10.2" DSI Panel
+
+maintainers:
+  - Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
+
+description: |
+  This panel requires a dual-channel DSI host to operate. It supports two modes:
+  - left-right: each channel drives the left or right half of the screen
+  - even-odd: each channel drives the even or odd lines of the screen
+
+  Each of the DSI channels controls a separate DSI peripheral. The peripheral
+  driven by the first link (DSI-LINK1) is considered the primary peripheral
+  and controls the device. The 'link2' property contains a phandle to the
+  peripheral driven by the second link (DSI-LINK2).
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: jdi,lpm102a188a
+
+  reg:
+    maxItems: 1
+
+  enable-gpios: true
+  reset-gpios: true
+  power-supply: true
+  backlight: true
+
+  ddi-supply:
+    description: The regulator that provides IOVCC (1.8V).
+
+  link2:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to the DSI peripheral on the secondary link. Note that the
+      presence of this property marks the containing node as DSI-LINK1.
+
+required:
+  - compatible
+  - reg
+
+if:
+  required:
+    - link2
+then:
+  required:
+    - power-supply
+    - ddi-supply
+    - enable-gpios
+    - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+
+    dsia: dsi@54300000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x0 0x54300000 0x0 0x00040000>;
+
+        link2: panel@0 {
+            compatible = "jdi,lpm102a188a";
+            reg = <0>;
+        };
+    };
+
+    dsib: dsi@54400000{
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x0 0x54400000 0x0 0x00040000>;
+        nvidia,ganged-mode = <&dsia>;
+
+        link1: panel@0 {
+            compatible = "jdi,lpm102a188a";
+            reg = <0>;
+            power-supply = <&pplcd_vdd>;
+            ddi-supply = <&pp1800_lcdio>;
+            enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+            link2 = <&link2>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
index 4f92365e888a..0c8b5cb78bfe 100644
--- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
@@ -16,8 +16,10 @@ properties:
   compatible:
     const: jdi,lt070me05000
 
+  reg:
+    maxItems: 1
+
   enable-gpios: true
-  reg: true
   reset-gpios: true
 
   vddp-supply:
@@ -35,6 +37,8 @@ properties:
       phandle of the gpio for power ic line
       Power IC supply enable, High active
 
+  port: true
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
index c45c92a3d41f..d86c916f7b55 100644
--- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
+++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -6,26 +6,27 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: kingdisplay,kd035g6-54nt
 
+  reg:
+    maxItems: 1
+
   backlight: true
   port: true
   power-supply: true
-  reg: true
   reset-gpios: true
 
+  spi-3wire: true
+
 required:
   - compatible
   - power-supply
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
new file mode 100644
index 000000000000..b5dc02b27200
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: leadtek,ltk035c5444t
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk035c5444t";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
index 3715882b63b6..5fcea62fd58f 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel
 
 maintainers:
-  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+  - Quentin Schulz <quentin.schulz@theobroma-systems.com>
 
 allOf:
   - $ref: panel-common.yaml#
@@ -17,8 +17,13 @@ properties:
     enum:
       - leadtek,ltk050h3146w
       - leadtek,ltk050h3146w-a2
-  reg: true
+      - leadtek,ltk050h3148w
+
+  reg:
+    maxItems: 1
+
   backlight: true
+  port: true
   reset-gpios: true
   iovcc-supply:
     description: regulator that supplies the iovcc voltage
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
index c5944b4d636c..b0e2c82232d3 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -14,9 +14,15 @@ allOf:
 
 properties:
   compatible:
-    const: leadtek,ltk500hd1829
-  reg: true
+    enum:
+      - leadtek,ltk101b4029w
+      - leadtek,ltk500hd1829
+
+  reg:
+    maxItems: 1
+
   backlight: true
+  port: true
   reset-gpios: true
   iovcc-supply:
     description: regulator that supplies the iovcc voltage
diff --git a/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml
new file mode 100644
index 000000000000..0f0b9079f199
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,ld070wx3-sl01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG Corporation 7" WXGA TFT LCD panel
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: lg,ld070wx3-sl01
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vcc-supply: true
+
+  backlight: true
+  port: true
+
+required:
+  - compatible
+  - vdd-supply
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "lg,ld070wx3-sl01";
+            reg = <0>;
+
+            vdd-supply = <&vdd_3v3_lcd>;
+            vcc-supply = <&vcc_1v8_lcd>;
+
+            backlight = <&backlight>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
index b4314ce7b411..590ccc27d104 100644
--- a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
@@ -15,13 +15,14 @@ maintainers:
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: lg,lg4573
 
-  reg: true
-  spi-max-frequency: true
+  reg:
+    maxItems: 1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml b/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
new file mode 100644
index 000000000000..2219d3d4ac43
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/lg,sw43408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LG SW43408 1080x2160 DSI panel
+
+maintainers:
+  - Casey Connolly <casey.connolly@linaro.org>
+
+description:
+  This panel is used on the Pixel 3, it is a 60hz OLED panel which
+  required DSC (Display Stream Compression) and has rounded corners.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: lg,sw43408
+
+  reg:
+    maxItems: 1
+
+  port: true
+  vddi-supply: true
+  vpnl-supply: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - vddi-supply
+  - vpnl-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "lg,sw43408";
+            reg = <0>;
+
+            vddi-supply = <&vreg_l14a_1p88>;
+            vpnl-supply = <&vreg_l28a_3p0>;
+
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
index 830e335ddb53..3de17fd8513b 100644
--- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
@@ -6,24 +6,27 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: LG.Philips LB035Q02 Panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Tomi Valkeinen <tomi.valkeinen@ti.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: lgphilips,lb035q02
 
+  reg:
+    maxItems: 1
+
   label: true
   enable-gpios: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - enable-gpios
diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml
deleted file mode 100644
index 49460c9dceea..000000000000
--- a/Documentation/devicetree/bindings/display/panel/lvds.yaml
+++ /dev/null
@@ -1,117 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/panel/lvds.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: LVDS Display Panel
-
-maintainers:
-  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-  - Thierry Reding <thierry.reding@gmail.com>
-
-description: |+
-  LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
-  incompatible data link layers have been used over time to transmit image data
-  to LVDS panels. This bindings supports display panels compatible with the
-  following specifications.
-
-  [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
-  1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
-  [LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
-  Semiconductor
-  [VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
-  Electronics Standards Association (VESA)
-
-  Device compatible with those specifications have been marketed under the
-  FPD-Link and FlatLink brands.
-
-allOf:
-  - $ref: panel-common.yaml#
-
-properties:
-  compatible:
-    contains:
-      const: panel-lvds
-    description:
-      Shall contain "panel-lvds" in addition to a mandatory panel-specific
-      compatible string defined in individual panel bindings. The "panel-lvds"
-      value shall never be used on its own.
-
-  data-mapping:
-    enum:
-      - jeida-18
-      - jeida-24
-      - vesa-24
-    description: |
-      The color signals mapping order.
-
-      LVDS data mappings are defined as follows.
-
-      - "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
-        [VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
-
-      Slot          0       1       2       3       4       5       6
-                ________________                         _________________
-      Clock                     \_______________________/
-                  ______  ______  ______  ______  ______  ______  ______
-      DATA0     ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
-      DATA1     ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
-      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
-
-      - "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
-        specifications. Data are transferred as follows on 4 LVDS lanes.
-
-      Slot          0       1       2       3       4       5       6
-                ________________                         _________________
-      Clock                     \_______________________/
-                  ______  ______  ______  ______  ______  ______  ______
-      DATA0     ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
-      DATA1     ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
-      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
-      DATA3     ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
-
-      - "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
-        Data are transferred as follows on 4 LVDS lanes.
-
-      Slot          0       1       2       3       4       5       6
-                ________________                         _________________
-      Clock                     \_______________________/
-                  ______  ______  ______  ______  ______  ______  ______
-      DATA0     ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
-      DATA1     ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
-      DATA2     ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
-      DATA3     ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
-
-      Control signals are mapped as follows.
-
-      CTL0: HSync
-      CTL1: VSync
-      CTL2: Data Enable
-      CTL3: 0
-
-  data-mirror:
-    type: boolean
-    description:
-      If set, reverse the bit order described in the data mappings below on all
-      data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
-
-  port: true
-  ports: true
-
-required:
-  - compatible
-  - data-mapping
-  - width-mm
-  - height-mm
-  - panel-timing
-
-oneOf:
-  - required:
-      - port
-  - required:
-      - ports
-
-additionalProperties: true
-
-...
diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
index a4b8569ab81c..74ff772973d6 100644
--- a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/mantix,mlaf057we51-x.yaml#
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
index b5e7ee230fa6..96621b89ae9e 100644
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
@@ -11,19 +11,31 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa104xd12
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: mitsubishi,aa104xd12
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   vcc-supply:
     description: Reference to the regulator powering the panel VCC pins.
 
   data-mapping:
-    const: jeida-24
+    enum:
+      - jeida-18
+      - jeida-24
 
   width-mm:
     const: 210
@@ -31,6 +43,7 @@ properties:
   height-mm:
     const: 158
 
+  backlight: true
   panel-timing: true
   port: true
 
@@ -38,7 +51,11 @@ additionalProperties: false
 
 required:
   - compatible
-  - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
index 977c50a85b67..37f01d847aac 100644
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa121td01
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: mitsubishi,aa121td01
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   vcc-supply:
     description: Reference to the regulator powering the panel VCC pins.
@@ -39,6 +49,11 @@ additionalProperties: false
 required:
   - compatible
   - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
index aa788eaa2f71..1cffe4d6d498 100644
--- a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
+++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
@@ -15,14 +15,17 @@ maintainers:
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: nec,nl8048hl11
 
+  reg:
+    maxItems: 1
+
   label: true
   port: true
-  reg: true
   reset-gpios: true
 
   spi-max-frequency:
@@ -34,13 +37,13 @@ required:
   - reset-gpios
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    spi0 {
+    spi {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
new file mode 100644
index 000000000000..d3a25a8fd7e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/newvision,nv3051d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NewVision NV3051D based LCD panel
+
+description: |
+  The NewVision NV3051D is a driver chip used to drive DSI panels.
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - anbernic,rg351v-panel
+          - anbernic,rg353p-panel
+          - powkiddy,rk2023-panel
+      - const: newvision,nv3051d
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  port: true
+  reset-gpios:
+    description: Active low reset GPIO
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "anbernic,rg353p-panel", "newvision,nv3051d";
+            reg = <0>;
+            backlight = <&backlight>;
+            reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
index bc92928c805b..bb50fd5506c3 100644
--- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
@@ -15,20 +15,26 @@ allOf:
 properties:
   compatible:
     items:
-      - const: hydis,hva40wv1
+      - enum:
+          - frida,frd400b25025
+          - hydis,hva40wv1
       - const: novatek,nt35510
     description: This indicates the panel manufacturer of the panel
       that is in turn using the NT35510 panel driver. The compatible
       string determines how the NT35510 panel driver shall be configured
       to work with the indicated panel. The novatek,nt35510 compatible shall
       always be provided as a fallback.
-  reg: true
+
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   vdd-supply:
     description: regulator that supplies the vdd voltage
   vddi-supply:
     description: regulator that supplies the vddi voltage
   backlight: true
+  port: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml
new file mode 100644
index 000000000000..a9e40493986b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35950-based display panels
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels,
+  with Static RAM for content retention in command mode and also supports
+  video mode with VESA Frame Buffer Compression or Display Stream Compression
+  on single, or dual dsi port(s).
+  This DDIC is also capable of upscaling an input image to the panel's native
+  resolution, for example it can upscale a 1920x1080 input to 3840x2160 with
+  either bilinear interpolation or pixel duplication.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sharp,ls055d1sx04
+      - const: novatek,nt35950
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the NT35950 panel driver. The compatible
+      string determines how the NT35950 panel driver shall be configured
+      to work with the indicated panel. The novatek,nt35950 compatible shall
+      always be provided as a fallback.
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA, gpio
+      can be configured using mux, pinctrl, pinctrl-names (active high)
+
+  avdd-supply:
+    description: positive boost supply regulator
+  avee-supply:
+    description: negative boost supply regulator
+  dvdd-supply:
+    description: regulator that supplies the digital voltage
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+  backlight: true
+  ports: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - avdd-supply
+  - avee-supply
+  - dvdd-supply
+  - vddio-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls055d1sx04", "novatek,nt35950";
+            reg = <0>;
+
+            backlight = <&pmi8998_wled>;
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            avdd-supply = <&lab>;
+            avee-supply = <&ibb>;
+            dvdd-supply = <&disp_dvdd_vreg>;
+            vddio-supply = <&vreg_l14a_1p85>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    panel_in1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
new file mode 100644
index 000000000000..c4bae4f77085
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36523.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36523 based DSI display Panels
+
+maintainers:
+  - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+  The Novatek NT36523 is a generic DSI Panel IC used to drive dsi
+  panels. Support video mode panels from China Star Optoelectronics
+  Technology (CSOT) and BOE Technology.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - xiaomi,elish-boe-nt36523
+              - xiaomi,elish-csot-nt36523
+          - const: novatek,nt36523
+      - items:
+          - enum:
+              - lenovo,j606f-boe-nt36523w
+          - const: novatek,nt36523w
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA
+
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+  rotation: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - reset-gpios
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - novatek,nt36523w
+    then:
+      properties:
+        ports:
+          properties:
+            port@1: false
+    else:
+      properties:
+        port: false
+        ports:
+          required:
+            - port@1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523";
+            reg = <0>;
+
+            vddio-supply = <&vreg_l14a_1p88>;
+            reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in_0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1{
+                    reg = <1>;
+                    panel_in_1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
index ef4c0a24512d..800a2f0a4dad 100644
--- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
@@ -29,6 +29,9 @@ properties:
       determines how the NT36672A panel driver is configured for the indicated
       panel. The novatek,nt36672a compatible shall always be provided as a fallback.
 
+  reg:
+    maxItems: 1
+
   reset-gpios:
     maxItems: 1
     description: phandle of gpio for reset line - This should be 8mA, gpio
@@ -44,13 +47,13 @@ properties:
   vddneg-supply:
     description: phandle of the negative boost supply regulator
 
-  reg: true
   port: true
+  backlight: true
 
 required:
   - compatible
   - reg
-  - vddi0-supply
+  - vddio-supply
   - vddpos-supply
   - vddneg-supply
   - reset-gpios
@@ -69,14 +72,13 @@ examples:
         panel@0 {
             compatible = "tianma,fhd-video", "novatek,nt36672a";
             reg = <0>;
-            vddi0-supply = <&vreg_l14a_1p88>;
+            vddio-supply = <&vreg_l14a_1p88>;
             vddpos-supply = <&lab>;
             vddneg-supply = <&ibb>;
 
+            backlight = <&pmi8998_wled>;
             reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 
-            #address-cells = <1>;
-            #size-cells = <0>;
             port {
                 tianma_nt36672a_in_0: endpoint {
                     remote-endpoint = <&dsi0_out>;
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672e.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672e.yaml
new file mode 100644
index 000000000000..dc4672f3d01d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672e.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36672e.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36672E LCD DSI Panel
+
+maintainers:
+  - Ritesh Kumar <quic_riteshk@quicinc.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: novatek,nt36672e
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddi-supply: true
+  avdd-supply: true
+  avee-supply: true
+  port: true
+  reset-gpios: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vddi-supply
+  - avdd-supply
+  - avee-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "novatek,nt36672e";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+
+            vddi-supply = <&vreg_l8c_1p8>;
+            avdd-supply = <&disp_avdd>;
+            avee-supply = <&disp_avee>;
+
+            backlight = <&pwm_backlight>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml
new file mode 100644
index 000000000000..1b38c1d0af68
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt37801.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt37801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT37801 AMOLED DSI Panel
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  Naming is inconclusive and different sources claim this is either Novatek
+  NT37801 or NT37810 AMOLED DSI Panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: novatek,nt37801
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vci-supply: true
+  vdd-supply: true
+  vddio-supply: true
+  port: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - vci-supply
+  - vdd-supply
+  - vddio-supply
+  - port
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "novatek,nt37801";
+            reg = <0>;
+
+            vci-supply = <&vreg_l13b_3p0>;
+            vdd-supply = <&vreg_l11b_1p2>;
+            vddio-supply = <&vreg_l12b_1p8>;
+
+            reset-gpios = <&tlmm 98 GPIO_ACTIVE_LOW>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
index 2329d9610f83..e5d8785fdf90 100644
--- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
+++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for Olimex Ltd. LCD-OLinuXino bridge panel.
+title: Olimex Ltd. LCD-OLinuXino bridge panel.
 
 maintainers:
   - Stefan Mavrodiev <stefan@olimex.com>
@@ -20,7 +20,7 @@ description: |
   The panel itself contains:
     - AT24C16C EEPROM holding panel identification and timing requirements
     - AR1021 resistive touch screen controller (optional)
-    - FT5x6 capacitive touch screnn controller (optional)
+    - FT5x6 capacitive touch screen controller (optional)
     - GT911/GT928 capacitive touch screen controller (optional)
 
   The above chips share same I2C bus. The EEPROM is factory preprogrammed with
@@ -38,10 +38,12 @@ properties:
   compatible:
     const: olimex,lcd-olinuxino
 
+  reg:
+    maxItems: 1
+
   backlight: true
   enable-gpios: true
   power-supply: true
-  reg: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
index 17cbd0ad32bf..1e4f140f48b8 100644
--- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/orisetech,otm8009a.yaml#
@@ -50,4 +50,3 @@ examples:
       };
     };
 ...
-
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common-dual.yaml b/Documentation/devicetree/bindings/display/panel/panel-common-dual.yaml
new file mode 100644
index 000000000000..cc7ea3c35c77
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-common-dual.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-common-dual.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Dual-Link Display Panels
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description:
+  Properties common for Panel IC supporting dual link panels.  Devices might
+  support also single link.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: First link
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Second link
+
+      "#address-cells": true
+      "#size-cells": true
+
+    required:
+      - port@0
+
+# Single-panel setups are still allowed.
+oneOf:
+  - required:
+      - ports
+  - required:
+      - port
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index 5b38dc89cb21..087415753d60 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -12,7 +12,7 @@ maintainers:
 
 description: |
   This document defines device tree properties common to several classes of
-  display panels. It doesn't constitue a device tree binding specification by
+  display panels. It doesn't constitute a device tree binding specification by
   itself but is meant to be referenced by device tree bindings.
 
   When referenced from panel device tree bindings the properties defined in this
@@ -51,6 +51,14 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 90, 180, 270]
 
+  flip-horizontal:
+    description: boolean to flip image horizontally
+    type: boolean
+
+  flip-vertical:
+    description: boolean to flip image vertically
+    type: boolean
+
   # Display Timings
   panel-timing:
     description:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
index 4a36aa64c716..f8dc9929e833 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/panel-dsi-cm.yaml#
diff --git a/Documentation/devicetree/bindings/display/panel/panel-edp-legacy.yaml b/Documentation/devicetree/bindings/display/panel/panel-edp-legacy.yaml
new file mode 100644
index 000000000000..b308047c1edf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-edp-legacy.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-edp-legacy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Legacy eDP panels from before the "edp-panel" compatible
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description: |
+  This binding file is a collection of eDP panels from before the generic
+  "edp-panel" compatible was introduced. It is kept around to support old
+  dts files. The only reason one might add a new panel here instead of using
+  the generic "edp-panel" is if it needed to be used on an eDP controller
+  that doesn't support the generic "edp-panel" compatible, but it should be
+  a strong preference to add the generic "edp-panel" compatible instead.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+    # compatible must be listed in alphabetical order, ordered by compatible.
+    # The description in the comment is mandatory for each compatible.
+
+        # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+      - auo,b101ean01
+        # AUO B116XAK01 eDP TFT LCD panel
+      - auo,b116xa01
+        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+      - auo,b133htn01
+        # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
+      - auo,b133xtn01
+        # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
+      - boe,nv101wxmn51
+        # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv110wtm-n61
+        # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
+      - boe,nv133fhm-n61
+        # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
+      - boe,nv133fhm-n62
+        # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
+      - boe,nv140fhmn49
+        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+      - innolux,n116bca-ea1
+        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+      - innolux,n116bge
+        # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
+      - innolux,n125hce-gn1
+        # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
+      - innolux,p120zdg-bf1
+        # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
+      - kingdisplay,kd116n21-30nv-a010
+        # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
+      - lg,lp079qx1-sp0v
+        # LG 9.7" (2048x1536 pixels) TFT LCD panel
+      - lg,lp097qx1-spa1
+        # LG 12.0" (1920x1280 pixels) TFT LCD panel
+      - lg,lp120up1
+        # LG 12.9" (2560x1700 pixels) TFT LCD panel
+      - lg,lp129qe
+        # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
+      - neweast,wjfh116008a
+        # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
+      - samsung,lsn122dl01-c01
+        # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
+      - samsung,ltn140at29-301
+        # Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
+      - sharp,ld-d5116z01b
+        # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
+      - sharp,lq123p1jx31
+
+  backlight: true
+  ddc-i2c-bus: true
+  enable-gpios: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  no-hpd: true
+  hpd-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    panel: panel {
+      compatible = "innolux,n116bge";
+      power-supply = <&panel_regulator>;
+      backlight = <&backlight>;
+
+      panel-timing {
+        clock-frequency = <74250000>;
+        hactive = <1366>;
+        hfront-porch = <136>;
+        hback-porch = <60>;
+        hsync-len = <30>;
+        hsync-active = <0>;
+        vactive = <768>;
+        vfront-porch = <8>;
+        vback-porch = <12>;
+        vsync-len = <12>;
+        vsync-active = <0>;
+      };
+
+      port {
+        panel_in_edp: endpoint {
+          remote-endpoint = <&edp_out_panel>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
new file mode 100644
index 000000000000..dbc01e640895
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic LVDS Display Panel
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: panel-lvds
+
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - advantech,idk-1110wr
+            - advantech,idk-2121wr
+            - innolux,ee101ia-01d
+            - mitsubishi,aa104xd12
+            - mitsubishi,aa121td01
+            - sgd,gktw70sdae4se
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # Admatec 9904379 10.1" 1024x600 LVDS panel
+          - admatec,9904379
+          # Ampire AMP19201200B5TZQW-T03 10.1" WUXGA (1920x1200) color TFT LCD panel
+          - ampire,amp19201200b5tzqw-t03
+          - auo,b101ew05
+          # AUO G084SN05 V9 8.4" 800x600 LVDS panel
+          - auo,g084sn05
+          # Chunghwa Picture Tubes Ltd. 7" WXGA (800x1280) TFT LCD LVDS panel
+          - chunghwa,claa070wp03xg
+          # EDT ETML0700Z8DHA 7.0" Full HD (1920x1080) color TFT LCD LVDS panel
+          - edt,etml0700z8dha
+          # EDT ETML0700Z9NDHA 7.0" WSVGA (1024x600) color TFT LCD LVDS panel
+          - edt,etml0700z9ndha
+          # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
+          - hannstar,hsd101pww2
+          # Hydis Technologies 7" WXGA (800x1280) TFT LCD LVDS panel
+          - hydis,hv070wx2-1e0
+          # Jenson Display BL-JT60050-01A 7" WSVGA (1024x600) color TFT LCD LVDS panel
+          - jenson,bl-jt60050-01a
+          - tbs,a711-panel
+          # Winstar WF70A8SYJHLNGA 7" WSVGA (1024x600) color TFT LCD LVDS panel
+          - winstar,wf70a8syjhlnga
+
+      - const: panel-lvds
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
new file mode 100644
index 000000000000..6f0290c4e291
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DBI SPI Panel
+
+maintainers:
+  - Noralf Trønnes <noralf@tronnes.org>
+
+description: |
+  This binding is for display panels using a MIPI DBI compatible controller
+  in SPI mode.
+
+  The MIPI Alliance Standard for Display Bus Interface defines the electrical
+  and logical interfaces for display controllers historically used in mobile
+  phones. The standard defines 4 display architecture types and this binding is
+  for type 1 which has full frame memory. There are 3 interface types in the
+  standard and type C is the serial interface.
+
+  The standard defines the following interface signals for type C:
+  - Power:
+    - Vdd: Power supply for display module
+      Called power-supply in this binding.
+    - Vddi: Logic level supply for interface signals
+      Called io-supply in this binding.
+  - Interface:
+    - CSx: Chip select
+    - SCL: Serial clock
+    - Dout: Serial out
+    - Din: Serial in
+    - SDA: Bidrectional in/out
+    - D/CX: Data/command selection, high=data, low=command
+      Called dc-gpios in this binding.
+    - RESX: Reset when low
+      Called reset-gpios in this binding.
+
+  The type C interface has 3 options:
+
+    - Option 1: 9-bit mode and D/CX as the 9th bit
+      |              Command              |  the next command or following data  |
+      |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 2: 16-bit mode and D/CX as a 9th bit
+      |              Command or data                              |
+      |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 3: 8-bit mode and D/CX as a separate interface line
+      |        Command or data         |
+      |<D7><D6><D5><D4><D3><D2><D1><D0>|
+
+  The standard defines one pixel format for type C: RGB111. The industry
+  however has decided to provide the type A/B interface pixel formats also on
+  the Type C interface and most common among these are RGB565 and RGB666.
+  The MIPI DCS command set_address_mode (36h) has one bit that controls RGB/BGR
+  order. This gives each supported RGB format a BGR variant.
+
+  The panel resolution is specified using the panel-timing node properties
+  hactive (width) and vactive (height). The other mandatory panel-timing
+  properties should be set to zero except clock-frequency which can be
+  optionally set to inform about the actual pixel clock frequency.
+
+  If the panel is wired to the controller at an offset specify this using
+  hback-porch (x-offset) and vback-porch (y-offset).
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - saef,sftc154b
+          - sainsmart18
+          - shineworld,lh133k
+      - const: panel-mipi-dbi-spi
+
+  reg:
+    maxItems: 1
+
+  write-only:
+    type: boolean
+    description:
+      Controller is not readable (ie. Din (MISO on the SPI interface) is not
+      wired up).
+
+  dc-gpios:
+    maxItems: 1
+    description: |
+      Controller data/command selection (D/CX) in 4-line SPI mode.
+      If not set, the controller is in 3-line SPI mode.
+
+  io-supply:
+    description: |
+      Logic level supply for interface signals (Vddi).
+      No need to set if this is the same as power-supply.
+
+  spi-3wire: true
+
+  format:
+    description: >
+      Pixel format in bit order as going on the wire:
+        * `x2r1g1b1r1g1b1` - RGB111, 2 pixels per byte
+        * `x2b1g1r1b1g1r1` - BGR111, 2 pixels per byte
+        * `x1r1g1b1x1r1g1b1` - RGB111, 2 pixels per byte
+        * `x1b1g1r1x1b1g1r1` - BGR111, 2 pixels per byte
+        * `r5g6b5` - RGB565, 2 bytes
+        * `b5g6r5` - BGR565, 2 bytes
+        * `r6x2g6x2b6x2` - RGB666, 3 bytes
+        * `b6x2g6x2r6x2` - BGR666, 3 bytes
+    enum:
+      - x2r1g1b1r1g1b1
+      - x2b1g1r1b1g1r1
+      - x1r1g1b1x1r1g1b1
+      - x1b1g1r1x1b1g1r1
+      - r5g6b5
+      - b5g6r5
+      - r6x2g6x2b6x2
+      - b6x2g6x2r6x2
+    default: r5g6b5
+
+required:
+  - compatible
+  - reg
+  - width-mm
+  - height-mm
+  - panel-timing
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0{
+            compatible = "sainsmart18", "panel-mipi-dbi-spi";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+
+            dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+            write-only;
+
+            format = "r5g6b5";
+
+            backlight = <&backlight>;
+
+            width-mm = <35>;
+            height-mm = <28>;
+
+            panel-timing {
+                hactive = <160>;
+                vactive = <128>;
+                hback-porch = <0>;
+                vback-porch = <0>;
+                clock-frequency = <0>;
+                hfront-porch = <0>;
+                hsync-len = <0>;
+                vfront-porch = <0>;
+                vsync-len = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
index fbd71669248f..8d668979b62d 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml#
@@ -35,24 +35,28 @@ properties:
       - boe,tv080wum-nl0
         # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
       - innolux,p079zca
+        # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel
+      - jdi,fhd-r63452
         # Khadas TS050 5" 1080x1920 LCD panel
       - khadas,ts050
+        # Khadas TS050 V2 5" 1080x1920 LCD panel
+      - khadas,ts050v2
         # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
       - kingdisplay,kd097d04
         # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel
       - lg,acx467akm-7
-        # LG Corporation 7" WXGA TFT LCD panel
-      - lg,ld070wx3-sl01
+        # LG Corporation 5" HD TFT LCD panel
+      - lg,lh500wx1-sd03
+        # Lincoln LCD197 5" 1080x1920 LCD panel
+      - lincolntech,lcd197
         # One Stop Displays OSD101T2587-53TS 10.1" 1920x1200 panel
       - osddisplays,osd101t2587-53ts
         # Panasonic 10" WUXGA TFT LCD panel
       - panasonic,vvx10f004b00
         # Panasonic 10" WUXGA TFT LCD panel
       - panasonic,vvx10f034n00
-        # Samsung s6e3fc2x01 1080x2340 AMOLED panel
-      - samsung,s6e3fc2x01
-        # Samsung sofef00 1080x2280 AMOLED panel
-      - samsung,sofef00
+        # Samsung s6e3fa7 1080x2220 based AMS559NK06 AMOLED panel
+      - samsung,s6e3fa7-ams559nk06
         # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel
       - tdo,tl070wsh30
 
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml
new file mode 100644
index 000000000000..548f5ac14500
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple-lvds-dual-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple LVDS panels with one power supply and dual LVDS ports
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Sam Ravnborg <sam@ravnborg.org>
+
+description: |
+  This binding file is a collection of the LVDS panels that
+  has dual LVDS ports and requires only a single power-supply.
+  The first port receives odd pixels, and the second port receives even pixels.
+  There are optionally a backlight and an enable GPIO.
+  The panel may use an OF graph binding for the association to the display,
+  or it may be a direct child node of the display.
+
+  If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+  - $ref: /schemas/display/lvds-dual-ports.yaml#
+  - $ref: panel-common.yaml#
+
+properties:
+
+  compatible:
+    enum:
+    # compatible must be listed in alphabetical order, ordered by compatible.
+    # The description in the comment is mandatory for each compatible.
+
+        # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
+      - auo,g133han01
+        # AU Optronics Corporation 15.6" FHD (1920x1080) TFT LCD panel
+      - auo,g156han04
+        # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
+      - auo,g185han01
+        # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel
+      - auo,g190ean01
+        # BOE AV123Z7M-N17 12.3" (1920x720) LVDS TFT LCD panel
+      - boe,av123z7m-n17
+        # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel
+      - koe,tx26d202vm0bwa
+        # Lincoln Technology Solutions, LCD185-101CT 10.1" TFT 1920x1200
+      - lincolntech,lcd185-101ct
+        # Microtips Technology MF-101HIEBCAF0 10.1" WUXGA (1920x1200) TFT LCD panel
+      - microtips,mf-101hiebcaf0
+        # Microtips Technology MF-103HIEB0GA0 10.25" 1920x720 TFT LCD panel
+      - microtips,mf-103hieb0ga0
+        # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
+      - nlt,nl192108ac18-02d
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        required:
+          - dual-lvds-odd-pixels
+
+      port@1:
+        required:
+          - dual-lvds-even-pixels
+
+    required:
+      - port@0
+      - port@1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    panel: panel-lvds {
+      compatible = "koe,tx26d202vm0bwa";
+      power-supply = <&vdd_lcd_reg>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          dual-lvds-odd-pixels;
+          reg = <0>;
+
+          panel_lvds0_in: endpoint {
+            remote-endpoint = <&lvds0_out>;
+          };
+        };
+
+        port@1 {
+          dual-lvds-even-pixels;
+          reg = <1>;
+
+          panel_lvds1_in: endpoint {
+            remote-endpoint = <&lvds1_out>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index f3c9395d23b6..24e277b19094 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -21,9 +21,9 @@ description: |
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: ../lvds-data-mapping.yaml#
 
 properties:
-
   compatible:
     enum:
     # compatible must be listed in alphabetical order, ordered by compatible.
@@ -33,60 +33,50 @@ properties:
       - ampire,am-1280800n3tzqw-t00h
         # Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
       - ampire,am-480272h3tmqw-t01h
+        # Ampire AM-800480L1TMQW-T00H 5" WVGA TFT LCD panel
+      - ampire,am-800480l1tmqw-t00h
         # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
       - ampire,am800480r3tmqwa1h
+        # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel
+      - ampire,am800600p5tmqw-tb8h
         # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
       - auo,b101aw03
-        # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
-      - auo,b101ean01
         # AU Optronics Corporation 10.1" WXGA TFT LCD panel
       - auo,b101xtn01
-        # AUO B116XAK01 eDP TFT LCD panel
-      - auo,b116xa01
         # AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
       - auo,b116xw03
-        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
-      - auo,b133han05
-        # AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
-      - auo,b133htn01
-        # AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
-      - auo,b133xtn01
-        # AU Optronics Corporation 14.0" FHD (1920x1080) color TFT-LCD panel
-      - auo,b140han06
         # AU Optronics Corporation 7.0" FHD (800 x 480) TFT LCD panel
       - auo,g070vvn01
         # AU Optronics Corporation 10.1" (1280x800) color TFT LCD panel
       - auo,g101evn010
         # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
       - auo,g104sn02
+        # AU Optronics Corporation 10.4" (800x600) color TFT LCD panel
+      - auo,g104stn01
         # AU Optronics Corporation 12.1" (1280x800) TFT LCD panel
       - auo,g121ean01
-        # AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel
-      - auo,g133han01
         # AU Optronics Corporation 15.6" (1366x768) TFT LCD panel
       - auo,g156xtn01
-        # AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel
-      - auo,g185han01
-        # AU Optronics Corporation 19.0" (1280x1024) TFT LCD panel
-      - auo,g190ean01
+        # AU Optronics Corporation 23.8" FHD (1920x1080) TFT LCD panel
+      - auo,p238han01
         # AU Optronics Corporation 31.5" FHD (1920x1080) TFT LCD panel
       - auo,p320hvn03
         # AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel
       - auo,t215hvn01
         # Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
       - avic,tm070ddh03
+        # BOE AV101HDT-a10 10.1" 1280x720 LVDS panel
+      - boe,av101hdt-a10
+        # BOE BP082WX1-100 8.2" WXGA (1280x800) LVDS panel
+      - boe,bp082wx1-100
+        # BOE BP101WX1-100 10.1" WXGA (1280x800) LVDS panel
+      - boe,bp101wx1-100
+        # BOE EV121WXM-N10-1850 12.1" WXGA (1280x800) TFT LCD panel
+      - boe,ev121wxm-n10-1850
         # BOE HV070WSA-100 7.01" WSVGA TFT LCD panel
       - boe,hv070wsa-100
-        # BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel
-      - boe,nv101wxmn51
-        # BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel
-      - boe,nv110wtm-n61
-        # BOE NV110WTM-N61 11.0" 2160x1440 TFT LCD Panel
-      - boe,nv133fhm-n61
-        # BOE NV133FHM-N62 13.3" FHD (1920x1080) TFT LCD Panel
-      - boe,nv133fhm-n62
-        # BOE NV140FHM-N49 14.0" FHD a-Si FT panel
-      - boe,nv140fhmn49
+        # Crystal Clear Technology CMT430B19N00 4.3" 480x272 TFT-LCD panel
+      - cct,cmt430b19n00
         # CDTech(H.K.) Electronics Limited 4.3" 480x272 color TFT-LCD panel
       - cdtech,s043wq26h-ct7
         # CDTech(H.K.) Electronics Limited 7" WSVGA (1024x600) TFT LCD Panel
@@ -97,14 +87,16 @@ properties:
       - cdtech,s070wv95-ct16
         # Chefree CH101OLHLWH-002 10.1" (1280x800) color TFT LCD panel
       - chefree,ch101olhlwh-002
-        # Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel
-      - chunghwa,claa070wp03xg
         # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
       - chunghwa,claa101wa01a
         # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
       - chunghwa,claa101wb01
         # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
       - chunghwa,claa101wb03
+        # DataImage, Inc. 4.3" WQVGA (480x272) TFT LCD panel with 24-bit parallel interface.
+      - dataimage,fg040346dsswbg04
+        # DataImage, Inc. 10.1" WXGA (1280×800) TFT LCD panel
+      - dataimage,fg1001l0dsswmg01
         # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
       - dataimage,scf0700c48ggu18
         # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
@@ -135,11 +127,17 @@ properties:
         # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
       - edt,etm0700g0dh6
       - edt,etm0700g0edh6
+        # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
+      - edt,etml0700y5dha
+        # Emerging Display Technology Corp. 10.1" LVDS WXGA TFT Display with capacitive touch
+      - edt,etml1010g3dra
         # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
         # capacitive touch
       - edt,etmv570g2dhu
         # E Ink VB3300-KCA
       - eink,vb3300-kca
+        # Evervision Electronics Co. Ltd. VGG644804 5.7" VGA TFT LCD Panel
+      - evervision,vgg644804
         # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel
       - evervision,vgg804821
         # Foxlink Group 5" WVGA TFT LCD panel
@@ -158,12 +156,14 @@ properties:
       - hannstar,hsd100pxn1
         # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
       - hit,tx23d38vm0caa
-        # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel
-      - ivo,m133nwf4-r0
         # Innolux AT043TN24 4.3" WQVGA TFT LCD panel
       - innolux,at043tn24
         # Innolux AT070TN92 7.0" WQVGA TFT LCD panel
       - innolux,at070tn92
+        # Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel
+      - innolux,g070ace-l01
+        # Innolux G070ACE-LH3 7" WVGA (800x480) TFT LCD panel with WLED backlight
+      - innolux,g070ace-lh3
         # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
       - innolux,g070y2-l01
         # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel
@@ -174,22 +174,20 @@ properties:
       - innolux,g121i1-l01
         # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
       - innolux,g121x1-l03
-        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
-      - innolux,n116bca-ea1
-        # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
-      - innolux,n116bge
-        # InnoLux 13.3" FHD (1920x1080) eDP TFT LCD panel
-      - innolux,n125hce-gn1
+        # Innolux Corporation 12.1" G121XCE-L01 XGA (1024x768) TFT LCD panel
+      - innolux,g121xce-l01
+        # InnoLux 15.6" FHD (1920x1080) TFT LCD panel
+      - innolux,g156hce-l01
+        # InnoLux 13.3" FHD (1920x1080) TFT LCD panel
+      - innolux,n133hse-ea1
         # InnoLux 15.6" WXGA TFT LCD panel
       - innolux,n156bge-l21
         # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
       - innolux,zj070na-01p
-        # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
-      - kingdisplay,kd116n21-30nv-a010
+        # JuTouch Technology Co.. 10" JT101TM023 WXGA (1280 x 800) LVDS panel
+      - jutouch,jt101tm023
         # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel
       - koe,tx14d24vm1bpa
-        # Kaohsiung Opto-Electronics Inc. 10.1" WUXGA (1920 x 1200) LVDS TFT LCD panel
-      - koe,tx26d202vm0bwa
         # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel
       - koe,tx31d200vm0baa
         # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT
@@ -200,16 +198,6 @@ properties:
       - lemaker,bl035-rgb-002
         # LG 7" (800x480 pixels) TFT LCD panel
       - lg,lb070wv8
-        # LG Corporation 5" HD TFT LCD panel
-      - lg,lh500wx1-sd03
-        # LG LP079QX1-SP0V 7.9" (1536x2048 pixels) TFT LCD panel
-      - lg,lp079qx1-sp0v
-        # LG 9.7" (2048x1536 pixels) TFT LCD panel
-      - lg,lp097qx1-spa1
-        # LG 12.0" (1920x1280 pixels) TFT LCD panel
-      - lg,lp120up1
-        # LG 12.9" (2560x1700 pixels) TFT LCD panel
-      - lg,lp129qe
         # Logic Technologies LT161010-2NHC 7" WVGA TFT Cap Touch Module
       - logictechno,lt161010-2nhc
         # Logic Technologies LT161010-2NHR 7" WVGA TFT Resistive Touch Module
@@ -220,28 +208,44 @@ properties:
       - logictechno,lttd800480070-l2rt
         # Logic Technologies LTTD800480070-L6WH-RT 7” 800x480 TFT Resistive Touch Module
       - logictechno,lttd800480070-l6wh-rt
+        # Microchip AC69T88A 5" 800X480 LVDS interface TFT LCD Panel
+      - microchip,ac69t88a
         # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
       - mitsubishi,aa070mc01-ca1
+        # Mitsubishi AA084XE01 8.4" XGA TFT LCD panel
+      - mitsubishi,aa084xe01
+        # Multi-Inno Technology Co.,Ltd MI0700A2T-30 7" 800x480 TFT Resistive Touch Module
+      - multi-inno,mi0700a2t-30
+        # Multi-Inno Technology Co.,Ltd MI0700S4T-6 7" 800x480 TFT Resistive Touch Module
+      - multi-inno,mi0700s4t-6
+        # Multi-Inno Technology Co.,Ltd MI0800FT-9 8" 800x600 TFT Resistive Touch Module
+      - multi-inno,mi0800ft-9
         # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod.
       - multi-inno,mi1010ait-1cp
+        # Multi-Inno Technology Co.,Ltd MI1010Z1T-1CP11 10.1" 1024x600 TFT Resistive Touch Module
+      - multi-inno,mi1010z1t-1cp11
         # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel
       - nec,nl12880bc20-05
         # NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
       - nec,nl4827hc19-05b
         # Netron-DY E231732 7.0" WSVGA TFT LCD panel
       - netron-dy,e231732
-        # NewEast Optoelectronics CO., LTD WJFH116008A eDP TFT LCD panel
-      - neweast,wjfh116008a
         # Newhaven Display International 480 x 272 TFT LCD panel
       - newhaven,nhd-4.3-480272ef-atxl
-        # NLT Technologies, Ltd. 15.6" FHD (1920x1080) LVDS TFT LCD panel
-      - nlt,nl192108ac18-02d
+        # NLT Technologies, Ltd. 12.1" WXGA (1280 x 800) LVDS TFT LCD panel
+      - nlt,nl12880bc20-spwg-24
+        # NLT Technologies, Ltd. 15.6" WXGA (1366×768) LVDS TFT LCD panel
+      - nlt,nl13676bc25-03f
         # New Vision Display 7.0" 800 RGB x 480 TFT LCD panel
       - nvd,9128
         # OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
       - okaya,rs800480t-7x0gp
         # Olimex 4.3" TFT LCD panel
       - olimex,lcd-olinuxino-43-ts
+        # Olimex 5.0" TFT LCD panel
+      - olimex,lcd-olinuxino-5-cts
+        # On Tat Industrial Company 5" DPI TFT panel.
+      - ontat,kd50g21-40nt-a1
         # On Tat Industrial Company 7" DPI TFT panel.
       - ontat,yx700wv03
         # OrtusTech COM37H3M05DTC Blanview 3.7" VGA portrait TFT-LCD panel
@@ -254,24 +258,32 @@ properties:
       - osddisplays,osd070t1718-19ts
         # One Stop Displays OSD101T2045-53TS 10.1" 1920x1200 panel
       - osddisplays,osd101t2045-53ts
+        # POWERTIP PH128800T004-ZZA01 10.1" WXGA TFT LCD panel
+      - powertip,ph128800t004-zza01
+        # POWERTIP PH128800T006-ZHC01 10.1" WXGA TFT LCD panel
+      - powertip,ph128800t006-zhc01
         # POWERTIP PH800480T013-IDF2 7.0" WVGA TFT LCD panel
       - powertip,ph800480t013-idf02
+        # PrimeView PM070WL4 7.0" 800x480 TFT LCD panel
+      - primeview,pm070wl4
         # QiaoDian XianShi Corporation 4"3 TFT LCD panel
       - qiaodian,qd43003c0-40
         # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel
       - qishenglong,gopher2b-lcd
+        # Raystar Optronics, Inc. RFF500F-AWH-DNN 5.0" TFT 840x480
+      - raystar,rff500f-awh-dnn
         # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800
       - rocktech,rk101ii01d-ct
         # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
       - rocktech,rk070er9427
-        # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
-      - samsung,atna33xc20
-        # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
-      - samsung,lsn122dl01-c01
+        # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel
+      - rocktech,rk043fn48h
+        # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel
+      - samsung,ltl101al01
+        # Samsung Electronics 10.6" FWXGA (1366x768) TFT LCD panel
+      - samsung,ltl106al01
         # Samsung Electronics 10.1" WSVGA TFT LCD panel
       - samsung,ltn101nt05
-        # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
-      - samsung,ltn140at29-301
         # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel
       - satoz,sat050at40h12r2
         # Sharp LQ035Q7DB03 3.5" QVGA TFT LCD panel
@@ -280,22 +292,28 @@ properties:
       - sharp,lq070y3dg3b
         # Sharp Display Corp. LQ101K1LY04 10.07" WXGA TFT LCD panel
       - sharp,lq101k1ly04
-        # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
-      - sharp,lq123p1jx31
         # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
       - sharp,ls020b1dd01d
         # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
       - shelly,sca07010-bfn-lnn
         # Starry KR070PE2T 7" WVGA TFT LCD panel
       - starry,kr070pe2t
-        # Starry 12.2" (1920x1200 pixels) TFT LCD panel
-      - starry,kr122ea0sra
+        # Startek KD070WVFPA043-C069A 7" TFT LCD panel
+      - startek,kd070wvfpa
+        # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
+      - team-source-display,tst043015cmhx
+        # Tianma Micro-electronics P0700WXF1MBAA 7.0" WXGA (1280x800) LVDS TFT LCD panel
+      - tianma,p0700wxf1mbaa
         # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
       - tianma,tm070jdhg30
+        # Tianma Micro-electronics TM070JDHG34-00 7.0" WXGA (1280x800) LVDS TFT LCD panel
+      - tianma,tm070jdhg34-00
         # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel
       - tianma,tm070jvhg33
         # Tianma Micro-electronics TM070RVHG71 7.0" WXGA TFT LCD panel
       - tianma,tm070rvhg71
+        # Topland TIAN-G07017-01 7.0" WSVGA TFT-LCD panel with capacitive touch
+      - topland,tian-g07017-01
         # Toshiba 8.9" WXGA (1280x768) TFT LCD panel
       - toshiba,lt089ac29000
         # TPK U.S.A. LLC Fusion 7" 800 x 480 (WVGA) LCD panel with capacitive touch
@@ -315,20 +333,26 @@ properties:
       - vivax,tpc9150-panel
         # VXT 800x480 color TFT LCD panel
       - vxt,vl050-8048nt-c01
+        # Waveshare 13.3" FHD (1920x1080) LCD panel
+      - waveshare,13.3inch-panel
+        # Waveshare 7.0" WSVGA (1024x600) LCD panel
+      - waveshare,7.0inch-c-panel
         # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel
       - winstar,wf35ltiacd
         # Yes Optoelectronics YTC700TLAG-05-201C 7" TFT LCD panel
       - yes-optoelectronics,ytc700tlag-05-201c
 
-  backlight: true
-  ddc-i2c-bus: true
-  enable-gpios: true
-  port: true
-  power-supply: true
-  no-hpd: true
-  hpd-gpios: true
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: innolux,g101ice-l01
+then:
+  properties:
+    data-mapping: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
@@ -346,3 +370,16 @@ examples:
         };
       };
     };
+  - |
+    panel_lvds: panel-lvds {
+      compatible = "innolux,g101ice-l01";
+      power-supply = <&vcc_lcd_reg>;
+
+      data-mapping = "jeida-24";
+
+      port {
+        panel_in_lvds: endpoint {
+          remote-endpoint = <&ltdc_out_lvds>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
index 9bf592dc3033..8c9774458777 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/panel-timing.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: panel timing bindings
+title: panel timing
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
@@ -17,30 +17,29 @@ description: |
 
   The parameters are defined as seen in the following illustration.
 
-  +----------+-------------------------------------+----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vback_porch                 |          |       |
-  |          |        v                            |          |       |
-  +----------#######################################----------+-------+
-  |          #        ^                            #          |       |
-  |          #        |                            #          |       |
-  |  hback   #        |                            #  hfront  | hsync |
-  |   porch  #        |       hactive              #  porch   |  len  |
-  |<-------->#<-------+--------------------------->#<-------->|<----->|
-  |          #        |                            #          |       |
-  |          #        |vactive                     #          |       |
-  |          #        |                            #          |       |
-  |          #        v                            #          |       |
-  +----------#######################################----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vfront_porch                |          |       |
-  |          |        v                            |          |       |
-  +----------+-------------------------------------+----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vsync_len                   |          |       |
-  |          |        v                            |          |       |
-  +----------+-------------------------------------+----------+-------+
-
+  +-------+----------+-------------------------------------+----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vsync_len                   |          |
+  |       |          |        v                            |          |
+  +-------+----------+-------------------------------------+----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vback_porch                 |          |
+  |       |          |        v                            |          |
+  +-------+----------#######################################----------+
+  |       |          #        ^                            #          |
+  |       |          #        |                            #          |
+  | hsync |  hback   #        |                            #  hfront  |
+  |  len  |   porch  #        |       hactive              #  porch   |
+  |<----->|<-------->#<-------+--------------------------->#<-------->|
+  |       |          #        |                            #          |
+  |       |          #        |vactive                     #          |
+  |       |          #        |                            #          |
+  |       |          #        v                            #          |
+  +-------+----------#######################################----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vfront_porch                |          |
+  |       |          |        v                            |          |
+  +-------+----------+-------------------------------------+----------+
 
   The following is the panel timings shown with time on the x-axis.
   This matches the timing diagrams often found in data sheets.
@@ -71,78 +70,72 @@ properties:
 
   hfront-porch:
     description: Horizontal front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of pixels
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
 
   hback-porch:
     description: Horizontal back porch timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of pixels
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
 
   hsync-len:
     description: Horizontal sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of pixels
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
 
   vfront-porch:
     description: Vertical front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of lines
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines
 
   vback-porch:
     description: Vertical back porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of lines
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines
 
   vsync-len:
     description: Vertical sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of lines
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines
@@ -152,6 +145,7 @@ properties:
       Horizontal sync pulse.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   vsync-active:
@@ -159,6 +153,7 @@ properties:
       Vertical sync pulse.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   de-active:
@@ -166,6 +161,7 @@ properties:
       Data enable.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   pixelclk-active:
@@ -175,6 +171,7 @@ properties:
       sample data on rising edge.
       Use 1 to drive pixel data on rising edge and
       sample data on falling edge
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   syncclk-active:
@@ -185,6 +182,7 @@ properties:
       sample sync on rising edge of pixel clock.
       Use 1 to drive sync on rising edge and
       sample sync on falling edge of pixel clock
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   interlaced:
diff --git a/Documentation/devicetree/bindings/display/panel/powertip,hx8238a.yaml b/Documentation/devicetree/bindings/display/panel/powertip,hx8238a.yaml
new file mode 100644
index 000000000000..b7d74faeb5d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/powertip,hx8238a.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/powertip,hx8238a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Powertip Electronic Technology Co. 320 x 240 LCD panel
+
+maintainers:
+  - Lukasz Majewski <lukma@denx.de>
+
+allOf:
+  - $ref: panel-dpi.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: powertip,hx8238a
+      - {} # panel-dpi, but not listed here to avoid false select
+
+  height-mm: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  width-mm: true
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/powertip,st7272.yaml b/Documentation/devicetree/bindings/display/panel/powertip,st7272.yaml
new file mode 100644
index 000000000000..f3622800f13f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/powertip,st7272.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/powertip,st7272.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Powertip Electronic Technology Co. 320 x 240 LCD panel
+
+maintainers:
+  - Lukasz Majewski <lukma@denx.de>
+
+allOf:
+  - $ref: panel-dpi.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: powertip,st7272
+      - {} # panel-dpi, but not listed here to avoid false select
+
+  height-mm: true
+  panel-timing: true
+  port: true
+  power-supply: true
+  width-mm: true
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
index 745dd247c409..4825792bf712 100644
--- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
@@ -16,7 +16,9 @@ properties:
   compatible:
     const: raydium,rm67191
 
-  reg: true
+  reg:
+    maxItems: 1
+
   port: true
   reset-gpios: true
   width-mm: true
@@ -24,6 +26,7 @@ properties:
 
   dsi-lanes:
     description: Number of DSI lanes to be used must be <3> or <4>
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [3, 4]
 
   v3p3-supply:
@@ -37,6 +40,7 @@ properties:
       0 - burst-mode
       1 - non-burst with sync event
       2 - non-burst with sync pulse
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1, 2]
 
 required:
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67200.yaml
new file mode 100644
index 000000000000..97b7fbe05c07
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67200.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm67200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM67200 based MIPI-DSI panels
+
+maintainers:
+  - Sebastian Reichel <sebastian.reichel@collabora.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - wanchanglong,w552793baa
+      - const: raydium,rm67200
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: 2.8V Logic voltage
+
+  iovcc-supply:
+    description: 1.8V IO voltage
+
+  vsp-supply:
+    description: positive 5.5V voltage
+
+  vsn-supply:
+    description: negative 5.5V voltage
+
+  backlight: true
+  port: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - port
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "wanchanglong,w552793baa", "raydium,rm67200";
+            reg = <0>;
+
+            vdd-supply = <&regulator1>;
+            iovcc-supply = <&regulator2>;
+            vsp-supply = <&regulator3>;
+            vsn-supply = <&regulator4>;
+            reset-gpios = <&gpiobank 42 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
index e8ce2315631a..46fe1014ebc4 100644
--- a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/raydium,rm68200.yaml#
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml
new file mode 100644
index 000000000000..7ad223f98253
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm692e5.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm692e5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM692E5 based DSI display panels
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  The Raydium RM692E5 is a generic DSI Panel IC used to control
+  AMOLED panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fairphone,fp5-rm692e5-boe
+      - const: raydium,rm692e5
+
+  reg:
+    maxItems: 1
+
+  dvdd-supply:
+    description: Digital voltage rail
+
+  vci-supply:
+    description: Analog voltage rail
+
+  vddio-supply:
+    description: I/O voltage rail
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - dvdd-supply
+  - vci-supply
+  - vddio-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "fairphone,fp5-rm692e5-boe", "raydium,rm692e5";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+            dvdd-supply = <&vreg_oled_vci>;
+            vci-supply = <&vreg_l12c>;
+            vddio-supply = <&vreg_oled_dvdd>;
+
+            port {
+                panel_in_0: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml
new file mode 100644
index 000000000000..ec445ff5631c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm69380.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/raydium,rm69380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raydium RM69380-based DSI display panels
+
+maintainers:
+  - David Wronek <david@mainlining.org>
+
+description:
+  The Raydium RM69380 is a generic DSI panel IC used to control
+  OLED panels.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - lenovo,j716f-edo-rm69380
+      - const: raydium,rm69380
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the RM69380 panel driver. The compatible
+      string determines how the RM69380 panel driver shall be configured
+      to work with the indicated panel. The raydium,rm69380 compatible shall
+      always be provided as a fallback.
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog voltage rail
+
+  vddio-supply:
+    description: I/O voltage rail
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be active low
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vddio-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "lenovo,j716f-edo-rm69380", "raydium,rm69380";
+            reg = <0>;
+
+            avdd-supply = <&panel_avdd_regulator>;
+            vddio-supply = <&vreg_l14a>;
+            reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in_0: endpoint {
+                        remote-endpoint = <&mdss_dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    panel_in_1: endpoint {
+                        remote-endpoint = <&mdss_dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/renesas,r61307.yaml b/Documentation/devicetree/bindings/display/panel/renesas,r61307.yaml
new file mode 100644
index 000000000000..90cce221c0d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/renesas,r61307.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/renesas,r61307.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R61307 based DSI Display Panel
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+  The Renesas R61307 is a generic DSI Panel IC used to control LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+            # KOE/HITACHI TX13D100VM0EAA 5.0" XGA TFT LCD panel
+          - hit,tx13d100vm0eaa
+          - koe,tx13d100vm0eaa
+      - const: renesas,r61307
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Regulator for main power supply.
+
+  iovcc-supply:
+    description: Regulator for 1.8V IO power supply.
+
+  backlight: true
+
+  renesas,gamma:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      0 - disabled
+      1-3 - gamma setting A presets
+    enum: [0, 1, 2, 3]
+
+  renesas,column-inversion:
+    type: boolean
+    description: switch between line and column inversion. The line
+      inversion is set by default.
+
+  renesas,contrast:
+    type: boolean
+    description: digital contrast adjustment
+
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - port
+  - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@1 {
+            compatible = "koe,tx13d100vm0eaa", "renesas,r61307";
+            reg = <1>;
+
+            reset-gpios = <&gpio 176 GPIO_ACTIVE_LOW>;
+
+            renesas,gamma = <3>;
+            renesas,column-inversion;
+            renesas,contrast;
+
+            vcc-supply = <&vcc_3v0_lcd>;
+            iovcc-supply = <&iovcc_1v8_lcd>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/renesas,r69328.yaml b/Documentation/devicetree/bindings/display/panel/renesas,r69328.yaml
new file mode 100644
index 000000000000..1cd219b510ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/renesas,r69328.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/renesas,r69328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R69328 based DSI Display Panel
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+  The Renesas R69328 is a generic DSI Panel IC used to control LCD panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+            # JDI DX12D100VM0EAA 4.7" WXGA TFT LCD panel
+          - jdi,dx12d100vm0eaa
+      - const: renesas,r69328
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator for main power supply.
+
+  vddio-supply:
+    description: Regulator for 1.8V IO power supply.
+
+  backlight: true
+
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - port
+  - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@1 {
+            compatible = "jdi,dx12d100vm0eaa", "renesas,r69328";
+            reg = <1>;
+
+            reset-gpios = <&gpio 176 GPIO_ACTIVE_LOW>;
+
+            vdd-supply = <&vdd_3v0_lcd>;
+            vddio-supply = <&vdd_1v8_io>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
index 09b5eb7542f8..4ae152cc55e0 100644
--- a/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
+++ b/Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/rocktech,jh057n00900.yaml#
@@ -20,6 +20,14 @@ allOf:
 properties:
   compatible:
     enum:
+      # Anberic RG353V-V2 5.0" 640x480 TFT LCD panel
+      - anbernic,rg353v-panel-v2
+      # GameForce Chi 3.5" 640x480 TFT LCD panel
+      - gameforce,chi-panel
+      # Powkiddy RGB10MAX3 5.0" 720x1280 TFT LCD panel
+      - powkiddy,rgb10max3-panel
+      # Powkiddy RGB30 3.0" 720x720 TFT LCD panel
+      - powkiddy,rgb30-panel
       # Rocktech JH057N00900 5.5" 720x1440 TFT LCD panel
       - rocktech,jh057n00900
       # Xingbangda XBD599 5.99" 720x1440 TFT LCD panel
@@ -39,6 +47,7 @@ properties:
   reset-gpios: true
 
   backlight: true
+  rotation: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
index d67617f6f74a..694037301583 100644
--- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
@@ -9,21 +9,20 @@ title: Ronbo RB070D30 DSI Display Panel
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
+allOf:
+  - $ref: panel-common.yaml#
+
 properties:
   compatible:
     const: ronbo,rb070d30
 
   reg:
-    description: MIPI-DSI virtual channel
+    maxItems: 1
 
   power-gpios:
     description: GPIO used for the power pin
     maxItems: 1
 
-  reset-gpios:
-    description: GPIO used for the reset pin
-    maxItems: 1
-
   shlr-gpios:
     description: GPIO used for the shlr pin (horizontal flip)
     maxItems: 1
@@ -35,10 +34,6 @@ properties:
   vcc-lcd-supply:
     description: Power regulator
 
-  backlight:
-    description: Backlight used by the panel
-    $ref: "/schemas/types.yaml#/definitions/phandle"
-
 required:
   - compatible
   - power-gpios
@@ -47,5 +42,6 @@ required:
   - shlr-gpios
   - updn-gpios
   - vcc-lcd-supply
+  - port
 
-additionalProperties: false
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
index ccc482570d6a..e8f9e9d06a29 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -33,7 +33,9 @@ properties:
         # Samsung S6E3HF2 5.65" 1600x2560 AMOLED panel
       - samsung,s6e3hf2
 
-  reg: true
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   enable-gpios: true
   te-gpios: true
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml
new file mode 100644
index 000000000000..e081c84a932b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ams495qa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS495QA01 panel with Magnachip D53E6EA8966 controller
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: samsung,ams495qa01
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: reset gpio, must be GPIO_ACTIVE_LOW
+  elvdd-supply:
+    description: regulator that supplies voltage to the panel display
+  enable-gpios: true
+  port: true
+  vdd-supply:
+    description: regulator that supplies voltage to panel logic
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "samsung,ams495qa01";
+            reg = <0>;
+            reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_3v3>;
+
+            port {
+                mipi_in_panel: endpoint {
+                  remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ams581vf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ams581vf01.yaml
new file mode 100644
index 000000000000..70dff9c0ef2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ams581vf01.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ams581vf01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS581VF01 SOFEF01-based 5.81" 1080x2340 MIPI-DSI Panel
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+description:
+  The Samsung AMS581VF01 is a 5.81 inch 1080x2340 MIPI-DSI CMD mode OLED panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,ams581vf01
+
+  reg:
+    maxItems: 1
+
+  vdd3p3-supply:
+    description: 3.3V source voltage rail
+
+  vddio-supply:
+    description: I/O source voltage rail
+
+  vsn-supply:
+    description: Negative source voltage rail
+
+  vsp-supply:
+    description: Positive source voltage rail
+
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd3p3-supply
+  - vddio-supply
+  - vsn-supply
+  - vsp-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,ams581vf01";
+            reg = <0>;
+
+            vdd3p3-supply = <&vreg_l7c_3p0>;
+            vddio-supply = <&vreg_l13a_1p8>;
+            vsn-supply = <&vreg_ibb>;
+            vsp-supply = <&vreg_lab>;
+
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ams639rq08.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ams639rq08.yaml
new file mode 100644
index 000000000000..f5b6ecb96f99
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ams639rq08.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ams639rq08.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS639RQ08 EA8076-based 6.39" 1080x2340 MIPI-DSI Panel
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+  - Jens Reidel <adrian@travitia.xyz>
+
+description:
+  The Samsung AMS639RQ08 is a 6.39 inch 1080x2340 MIPI-DSI CMD mode AMOLED panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,ams639rq08
+
+  reg:
+    maxItems: 1
+
+  vdd3p3-supply:
+    description: 3.3V source voltage rail
+
+  vddio-supply:
+    description: I/O source voltage rail
+
+  vsn-supply:
+    description: Negative source voltage rail
+
+  vsp-supply:
+    description: Positive source voltage rail
+
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd3p3-supply
+  - vddio-supply
+  - vsn-supply
+  - vsp-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,ams639rq08";
+            reg = <0>;
+
+            vdd3p3-supply = <&vreg_l18a_2p8>;
+            vddio-supply = <&vreg_l13a_1p8>;
+            vsn-supply = <&vreg_ibb>;
+            vsp-supply = <&vreg_lab>;
+
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml
new file mode 100644
index 000000000000..f1723e910252
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,atna33xc20.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      # Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
+      - const: samsung,atna33xc20
+      - items:
+          - enum:
+              # Samsung 13" 3K (2880×1920 pixels) eDP AMOLED panel
+              - samsung,atna30dw01
+              # Samsung 14" FHD+ (1920x1200 pixels) eDP AMOLED panel
+              - samsung,atna40ct06
+              # Samsung 14" WQXGA+ (2880x1800 pixels) eDP AMOLED panel
+              - samsung,atna40cu11
+              # Samsung 14" WQXGA+ (2880×1800 pixels) eDP AMOLED panel
+              - samsung,atna40yk20
+              # Samsung 14.5" WQXGA+ (2880x1800 pixels) eDP AMOLED panel
+              - samsung,atna45af01
+              # Samsung 14.5" 3K (2944x1840 pixels) eDP AMOLED panel
+              - samsung,atna45dc02
+              # Samsung 15.6" 3K (2880x1620 pixels) eDP AMOLED panel
+              - samsung,atna56ac03
+              # Samsung 16.0" 3K (2880x1800 pixels) eDP AMOLED panel
+              - samsung,atna60cl08
+          - const: samsung,atna33xc20
+
+  enable-gpios: true
+  port: true
+  power-supply: true
+  no-hpd: true
+  hpd-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - enable-gpios
+  - power-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        no-hpd;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            sn65dsi86_out: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+
+        aux-bus {
+          panel {
+            compatible = "samsung,atna33xc20";
+            enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+            power-supply = <&pp3300_dx_edp>;
+            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+
+            port {
+              panel_in_edp: endpoint {
+                remote-endpoint = <&sn65dsi86_out>;
+              };
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
index 060ee27a4749..bc92b16c95b9 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
@@ -6,23 +6,22 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Andrzej Hajda <a.hajda@samsung.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: samsung,ld9040
 
+  reg:
+    maxItems: 1
+
   display-timings: true
   port: true
-  reg: true
   reset-gpios: true
 
   vdd3-supply:
@@ -45,6 +44,9 @@ properties:
   panel-height-mm:
     description: physical panel height [mm]
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - reg
@@ -63,8 +65,6 @@ examples:
 
         lcd@0 {
             compatible = "samsung,ld9040";
-            #address-cells = <1>;
-            #size-cells = <0>;
 
             reg = <0>;
             vdd3-supply = <&ldo7_reg>;
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
index 251f0c7115aa..7ce8540551f9 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
@@ -9,20 +9,20 @@ title: Samsung LMS380KF01 display panel
 description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile
   Displays (SMD) utilizing the WideChips WS2401 display controller. It can be
   used with internal or external backlight control.
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: samsung,lms380kf01
 
-  reg: true
+  reg:
+    maxItems: 1
 
   interrupts:
     description: provides an optional ESD (electrostatic discharge)
@@ -59,7 +59,7 @@ required:
   - spi-cpol
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
index cd62968426fb..9363032883de 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
@@ -14,12 +14,14 @@ maintainers:
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: samsung,lms397kf04
 
-  reg: true
+  reg:
+    maxItems: 1
 
   reset-gpios: true
 
@@ -51,7 +53,7 @@ required:
   - spi-cpol
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
index 66d147496bc3..2af5bc47323f 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml
@@ -16,8 +16,10 @@ properties:
   compatible:
     const: samsung,s6d16d0
 
+  reg:
+    maxItems: 1
+
   port: true
-  reg: true
   reset-gpios: true
 
   vdd1-supply:
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
index 26e3c820a2f7..d74904164719 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
@@ -7,20 +7,21 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung S6D27A1 display panel
 
 description: The S6D27A1 is a 480x800 DPI display panel from Samsung Mobile
-  Displays (SMD). The panel must obey the rules for a SPI slave device
-  as specified in spi/spi-controller.yaml
+  Displays (SMD).
 
 maintainers:
   - Markuss Broks <markuss.broks@gmail.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: samsung,s6d27a1
 
-  reg: true
+  reg:
+    maxItems: 1
 
   interrupts:
     description: provides an optional ESD (electrostatic discharge)
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
new file mode 100644
index 000000000000..939da65114bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d7aa0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D7AA0 MIPI-DSI LCD panel controller
+
+maintainers:
+  - Artur Weber <aweber.kernel@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # 1280x800 LSL080AL02 panel
+          - samsung,lsl080al02
+          # 1024x768 LSL080AL03 panel
+          - samsung,lsl080al03
+          # 1024x768 LTL101AT01 panel
+          - samsung,ltl101at01
+      - const: samsung,s6d7aa0
+
+  reg:
+    maxItems: 1
+
+  backlight:
+    description:
+      Backlight to use for the panel. If this property is set on panels
+      that have DSI-based backlight control (LSL080AL03 and LTL101AT01),
+      it overrides the DSI-based backlight.
+
+  reset-gpios:
+    description: Reset GPIO pin, usually GPIO_ACTIVE_LOW.
+
+  power-supply:
+    description:
+      Main power supply for the panel; the exact voltage differs between
+      panels, and is usually somewhere around 3.3-5v.
+
+  vmipi-supply:
+    description: VMIPI supply, usually 1.8v.
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,lsl080al02", "samsung,s6d7aa0";
+            reg = <0>;
+            power-supply = <&display_3v3_supply>;
+            reset-gpios = <&gpf0 4 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml
new file mode 100644
index 000000000000..d48354fb52ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e3fc2x01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6E3FC2X01 AMOLED DDIC
+
+description: The S6E3FC2X01 is display driver IC with connected panel.
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+            # Samsung 6.41 inch, 1080x2340 pixels, 19.5:9 ratio
+          - samsung,s6e3fc2x01-ams641rw
+      - const: samsung,s6e3fc2x01
+
+  reg:
+    maxItems: 1
+
+  reset-gpios: true
+
+  port: true
+
+  vddio-supply:
+    description: VDD regulator
+
+  vci-supply:
+    description: VCI regulator
+
+  poc-supply:
+    description: POC regulator
+
+required:
+  - compatible
+  - reset-gpios
+  - vddio-supply
+  - vci-supply
+  - poc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6e3fc2x01-ams641rw", "samsung,s6e3fc2x01";
+            reg = <0>;
+
+            vddio-supply = <&vreg_l14a_1p88>;
+            vci-supply = <&s2dos05_buck1>;
+            poc-supply = <&s2dos05_ldo1>;
+
+            te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+            pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
+            pinctrl-1 = <&sde_dsi_suspend &sde_te_active_sleep>;
+            pinctrl-names = "default", "sleep";
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha8.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha8.yaml
new file mode 100644
index 000000000000..05a78429aaea
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3ha8.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e3ha8.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung s6e3ha8 AMOLED DSI panel
+
+description: The s6e3ha8 is a 1440x2960 DPI display panel from Samsung Mobile
+  Displays (SMD).
+
+maintainers:
+  - Dzmitry Sankouski <dsankouski@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6e3ha8
+
+  reg:
+    maxItems: 1
+
+  reset-gpios: true
+
+  port: true
+
+  vdd3-supply:
+    description: VDD regulator
+
+  vci-supply:
+    description: VCI regulator
+
+  vddr-supply:
+    description: VDDR regulator
+
+required:
+  - compatible
+  - reset-gpios
+  - vdd3-supply
+  - vci-supply
+  - vddr-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6e3ha8";
+            reg = <0>;
+            vci-supply = <&s2dos05_ldo4>;
+            vddr-supply = <&s2dos05_buck1>;
+            vdd3-supply = <&s2dos05_ldo1>;
+            te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+            pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
+            pinctrl-1 = <&sde_dsi_suspend &sde_te_active_sleep>;
+            pinctrl-names = "default", "sleep";
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
index ea58df49263a..c47e2a1a30e5 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
@@ -12,17 +12,24 @@ maintainers:
 allOf:
   - $ref: panel-common.yaml#
   - $ref: /schemas/leds/backlight/common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: samsung,s6e63m0
 
-  reg: true
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   port: true
   default-brightness: true
   max-brightness: true
 
+  spi-3wire: true
+  spi-cpha: true
+  spi-cpol: true
+
   vdd3-supply:
     description: VDD regulator
 
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams427ap24.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams427ap24.yaml
new file mode 100644
index 000000000000..db284ba5be20
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams427ap24.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e88a0-ams427ap24.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS427AP24 panel with S6E88A0 controller
+
+maintainers:
+  - Jakob Hauser <jahau@rocketmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6e88a0-ams427ap24
+
+  reg:
+    maxItems: 1
+
+  port: true
+  reset-gpios: true
+  flip-horizontal: true
+
+  vdd3-supply:
+    description: core voltage supply
+
+  vci-supply:
+    description: voltage supply for analog circuits
+
+required:
+  - compatible
+  - reg
+  - port
+  - reset-gpios
+  - vdd3-supply
+  - vci-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6e88a0-ams427ap24";
+            reg = <0>;
+
+            vdd3-supply = <&pm8916_l17>;
+            vci-supply = <&pm8916_l6>;
+            reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+            flip-horizontal;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
index 44ce98f68705..42634fc3b5b2 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
@@ -15,7 +15,11 @@ allOf:
 properties:
   compatible:
     const: samsung,s6e88a0-ams452ef01
-  reg: true
+
+  reg:
+    maxItems: 1
+
+  port: true
   reset-gpios: true
   vdd3-supply:
     description: core voltage supply
@@ -25,6 +29,7 @@ properties:
 required:
   - compatible
   - reg
+  - port
   - vdd3-supply
   - vci-supply
   - reset-gpios
@@ -46,5 +51,11 @@ examples:
                     vdd3-supply = <&pm8916_l17>;
                     vci-supply = <&reg_vlcd_vci>;
                     reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+
+                    port {
+                            panel_in: endpoint {
+                                    remote-endpoint = <&dsi0_out>;
+                            };
+                    };
             };
     };
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
index ca959451557e..19c8cc83db97 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
@@ -16,9 +16,13 @@ properties:
   compatible:
     const: samsung,s6e8aa0
 
-  reg: true
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   display-timings: true
+  flip-horizontal: true
+  flip-vertical: true
 
   vdd3-supply:
     description: core voltage supply
@@ -36,6 +40,7 @@ properties:
 
   init-delay:
     description: delay after initialization sequence [ms]
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   panel-width-mm:
     description: physical panel width [mm]
@@ -43,14 +48,6 @@ properties:
   panel-height-mm:
     description: physical panel height [mm]
 
-  flip-horizontal:
-    description: boolean to flip image horizontally
-    type: boolean
-
-  flip-vertical:
-    description: boolean to flip image vertically
-    type: boolean
-
 required:
   - compatible
   - reg
@@ -73,7 +70,7 @@ examples:
             vdd3-supply = <&vcclcd_reg>;
             vci-supply = <&vlcd_reg>;
             reset-gpios = <&gpy4 5 0>;
-            power-on-delay= <50>;
+            power-on-delay = <50>;
             reset-delay = <100>;
             init-delay = <100>;
             panel-width-mm = <58>;
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa5x01-ams561ra01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa5x01-ams561ra01.yaml
new file mode 100644
index 000000000000..eccfc66d7fe2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa5x01-ams561ra01.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6e8aa5x01-ams561ra01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS561RA01 panel with S6E8AA5X01 controller
+
+maintainers:
+  - Kaustabh Chakraborty <kauschluss@disroot.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6e8aa5x01-ams561ra01
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: core voltage supply
+
+  vci-supply:
+    description: voltage supply for analog circuits
+
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,s6e8aa5x01-ams561ra01";
+            reg = <0>;
+
+            vdd-supply = <&panel_vdd_reg>;
+            vci-supply = <&panel_vci_reg>;
+
+            reset-gpios = <&gpd3 4 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml b/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml
new file mode 100644
index 000000000000..eeee3cac72e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,sofef00.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SOFEF00 AMOLED DDIC
+
+description: The SOFEF00 is display driver IC with connected panel.
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+            # Samsung 6.01 inch, 1080x2160 pixels, 18:9 ratio
+          - samsung,sofef00-ams601nt22
+            # Samsung 6.28 inch, 1080x2280 pixels, 19:9 ratio
+          - samsung,sofef00-ams628nw01
+      - const: samsung,sofef00
+
+  reg:
+    maxItems: 1
+
+  poc-supply:
+    description: POC regulator
+
+  vci-supply:
+    description: VCI regulator
+
+  vddio-supply:
+    description: VDD regulator
+
+required:
+  - compatible
+  - reset-gpios
+  - poc-supply
+  - vci-supply
+  - vddio-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "samsung,sofef00-ams628nw01", "samsung,sofef00";
+            reg = <0>;
+
+            vddio-supply = <&vreg_l14a_1p88>;
+            vci-supply = <&s2dos05_buck1>;
+            poc-supply = <&s2dos05_ldo1>;
+
+            te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+            pinctrl-0 = <&panel_active>;
+            pinctrl-1 = <&panel_suspend>;
+            pinctrl-names = "default", "sleep";
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
index cfaa50cf5f5d..1df3cbb51ff9 100644
--- a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
+++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
 
 maintainers:
-  - Marco Franchi <marco.franchi@nxp.com>
+  - Fabio Estevam <festevam@gmail.com>
 
 allOf:
   - $ref: panel-common.yaml#
@@ -25,6 +25,8 @@ properties:
   avdd-supply:
     description: 5v analog regulator
 
+  enable-gpios: true
+
 required:
   - compatible
   - dvdd-supply
diff --git a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
index e63a570ae59d..e32d9188a3e0 100644
--- a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
@@ -7,17 +7,27 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Solomon Goldentek Display GKTW70SDAE4SE 7" WVGA LVDS Display Panel
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: sgd,gktw70sdae4se
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: sgd,gktw70sdae4se
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   data-mapping:
     const: jeida-18
@@ -35,6 +45,11 @@ additionalProperties: false
 
 required:
   - compatible
+  - port
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml
deleted file mode 100644
index fbb647eb33c9..000000000000
--- a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.yaml
+++ /dev/null
@@ -1,30 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/panel/sharp,ld-d5116z01b.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel
-
-maintainers:
-  - Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
-
-allOf:
-  - $ref: panel-common.yaml#
-
-properties:
-  compatible:
-    const: sharp,ld-d5116z01b
-
-  power-supply: true
-  backlight: true
-  port: true
-  no-hpd: true
-
-additionalProperties: false
-
-required:
-  - compatible
-  - power-supply
-
-...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml
new file mode 100644
index 000000000000..08a35ebbbb3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,lq079l1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 7.9" WQXGA TFT LCD panel
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description: >
+  This panel requires a dual-channel DSI host to operate and it supports
+  only left-right split mode, where each channel drives the left or right
+  half of the screen and only video mode.
+
+  Each of the DSI channels controls a separate DSI peripheral.
+  The peripheral driven by the first link (DSI-LINK1), left one, is
+  considered the primary peripheral and controls the device.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    const: sharp,lq079l1sx01
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description: regulator that supplies the analog voltage
+
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+  vsp-supply:
+    description: positive boost supply regulator
+
+  vsn-supply:
+    description: negative boost supply regulator
+
+  reset-gpios:
+    maxItems: 1
+
+  backlight: true
+  ports: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vddio-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,lq079l1sx01";
+            reg = <0>;
+
+            reset-gpios = <&gpio 59 GPIO_ACTIVE_LOW>;
+
+            avdd-supply = <&avdd_lcd>;
+            vddio-supply = <&vdd_lcd_io>;
+            vsp-supply = <&vsp_5v5_lcd>;
+            vsn-supply = <&vsn_5v5_lcd>;
+
+            backlight = <&backlight>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    panel_in1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
index a679d3647dbd..ce820b96a7e2 100644
--- a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
@@ -30,9 +30,16 @@ allOf:
 
 properties:
   compatible:
-    const: sharp,lq101r1sx01
+    oneOf:
+      - items:
+          - const: sharp,lq101r1sx03
+          - const: sharp,lq101r1sx01
+      - enum:
+          - sharp,lq101r1sx01
+
+  reg:
+    maxItems: 1
 
-  reg: true
   power-supply: true
   backlight: true
 
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml
index a90d0d8bf7c9..b6ea246430ce 100644
--- a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.yaml
@@ -16,7 +16,9 @@ properties:
   compatible:
     const: sharp,ls043t1le01-qhd
 
-  reg: true
+  reg:
+    maxItems: 1
+
   backlight: true
   reset-gpios: true
   port: true
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
index 271c097cc9a4..77a4fce129e7 100644
--- a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
@@ -16,7 +16,9 @@ properties:
   compatible:
     const: sharp,ls060t1sx01
 
-  reg: true
+  reg:
+    maxItems: 1
+
   backlight: true
   reset-gpios: true
   port: true
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
index 6dff59fe4be1..1e434240ea3f 100644
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
@@ -17,18 +17,23 @@ description: |
   Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
   inbuilt ST7701 chip.
 
-allOf:
-  - $ref: panel-common.yaml#
+  Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel
+  which has built-in ST7701 chip.
 
 properties:
   compatible:
     items:
       - enum:
+          - anbernic,rg-arc-panel
+          - anbernic,rg28xx-panel
+          - densitron,dmt028vghmcmi-1a
+          - elida,kd50t048a
           - techstar,ts8550b
+          - winstar,wf40eswaa6mnn0
       - const: sitronix,st7701
 
   reg:
-    description: DSI virtual channel used by that screen
+    description: DSI / SPI channel used by that screen
     maxItems: 1
 
   VCC-supply:
@@ -37,7 +42,16 @@ properties:
   IOVCC-supply:
     description: I/O system regulator
 
+  dc-gpios:
+    maxItems: 1
+    description:
+      Controller data/command selection (D/CX) in 4-line SPI mode.
+      If not set, the controller is in 3-line SPI mode.
+      Disallowed for DSI.
+
+  port: true
   reset-gpios: true
+  rotation: true
 
   backlight: true
 
@@ -46,9 +60,41 @@ required:
   - reg
   - VCC-supply
   - IOVCC-supply
+  - port
   - reset-gpios
 
-additionalProperties: false
+allOf:
+  - $ref: panel-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            # SPI connected panels
+            enum:
+              - anbernic,rg28xx-panel
+    then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              # DSI or SPI without D/CX pin
+              enum:
+                - anbernic,rg-arc-panel
+                - anbernic,rg28xx-panel
+                - densitron,dmt028vghmcmi-1a
+                - elida,kd50t048a
+                - techstar,ts8550b
+    then:
+      required:
+        - dc-gpios
+    else:
+      properties:
+        dc-gpios: false
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -65,5 +111,34 @@ examples:
             IOVCC-supply = <&reg_dldo2>;
             reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
             backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "anbernic,rg28xx-panel", "sitronix,st7701";
+            reg = <0>;
+            spi-max-frequency = <3125000>;
+            VCC-supply = <&reg_lcd>;
+            IOVCC-supply = <&reg_lcd>;
+            reset-gpios = <&pio 8 14 GPIO_ACTIVE_HIGH>; /* LCD-RST: PI14 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in_rgb: endpoint {
+                    remote-endpoint = <&tcon_lcd0_out_lcd>;
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
index fa46d151e7b3..0ce2ea13583d 100644
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
@@ -6,30 +6,44 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Sitronix ST7789V RGB panel with SPI control bus
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
-    const: sitronix,st7789v
+    enum:
+      - edt,et028013dma
+      - inanbo,t28cp45tn89-v17
+      - jasonic,jt240mhqs-hwt-ek-e3
+      - sitronix,st7789v
+
+  reg:
+    maxItems: 1
 
-  reg: true
   reset-gpios: true
   power-supply: true
   backlight: true
   port: true
+  rotation: true
+
+  spi-cpha: true
+  spi-cpol: true
+
+  spi-rx-bus-width:
+    minimum: 0
+    maximum: 1
+
+  dc-gpios:
+    maxItems: 1
+    description: DCX pin, Display data/command selection pin in parallel interface
 
 required:
   - compatible
   - reg
-  - reset-gpios
   - power-supply
 
 unevaluatedProperties: false
@@ -48,6 +62,7 @@ examples:
             reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
             backlight = <&pwm_bl>;
             power-supply = <&power>;
+            rotation = <180>;
             spi-max-frequency = <100000>;
             spi-cpol;
             spi-cpha;
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
index 78d060097052..fd778a20f760 100644
--- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
@@ -4,7 +4,12 @@
 $id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Sony ACX424AKP 4" 480x864 AMOLED panel
+title: Sony ACX424AKP/ACX424AKM 4" 480x864/480x854 AMOLED panel
+
+description: The Sony ACX424AKP and ACX424AKM are panels built around
+  the Novatek NT35560 display controller. The only difference is that
+  the AKM is configured to use 10 pixels less in the Y axis than the
+  AKP.
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -14,8 +19,13 @@ allOf:
 
 properties:
   compatible:
-    const: sony,acx424akp
-  reg: true
+    enum:
+      - sony,acx424akp
+      - sony,acx424akm
+
+  reg:
+    maxItems: 1
+
   reset-gpios: true
   vddi-supply:
     description: regulator that supplies the vddi voltage
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
index 95d053c548ab..5a8260224b74 100644
--- a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
@@ -6,20 +6,20 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Sony ACX565AKM SDI Panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Tomi Valkeinen <tomi.valkeinen@ti.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: sony,acx565akm
 
+  reg:
+    maxItems: 1
+
   label: true
   reset-gpios: true
   port: true
diff --git a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml
new file mode 100644
index 000000000000..032a989184ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,td4353-jdi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony TD4353 JDI 5 / 5.7" 2160x1080 MIPI-DSI Panel
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  The Sony TD4353 JDI is a 5 (XZ2c) / 5.7 (XZ2) inch 2160x1080
+  MIPI-DSI panel, used in Xperia XZ2 and XZ2 Compact smartphones.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sony,td4353-jdi-tama
+
+  reg:
+    maxItems: 1
+
+  backlight: true
+  width-mm: true
+  height-mm: true
+
+  vddio-supply:
+    description: VDDIO 1.8V supply
+
+  vsp-supply:
+    description: Positive 5.5V supply
+
+  vsn-supply:
+    description: Negative 5.5V supply
+
+  panel-reset-gpios:
+    description: Display panel reset pin
+
+  touch-reset-gpios:
+    description: Touch panel reset pin
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vsp-supply
+  - vsn-supply
+  - panel-reset-gpios
+  - touch-reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: panel@0 {
+            compatible = "sony,td4353-jdi-tama";
+            reg = <0>;
+
+            backlight = <&pmi8998_wled>;
+            vddio-supply = <&vreg_l14a_1p8>;
+            vsp-supply = <&lab>;
+            vsn-supply = <&ibb>;
+            panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+            touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml
new file mode 100644
index 000000000000..a58a31349757
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,tulip-truly-nt35521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony Tulip Truly NT35521 5.24" 1280x720 MIPI-DSI Panel
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Sony Tulip Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel, which
+  can be found no Sony Xperia M4 phone.  The panel backlight is managed
+  through DSI link.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sony,tulip-truly-nt35521
+
+  reg:
+    maxItems: 1
+
+  positive5-supply:
+    description: Positive 5V supply
+
+  negative5-supply:
+    description: Negative 5V supply
+
+  reset-gpios: true
+
+  enable-gpios: true
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - positive5-supply
+  - negative5-supply
+  - reset-gpios
+  - enable-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sony,tulip-truly-nt35521";
+            reg = <0>;
+            positive5-supply = <&positive5_reg>;
+            negative5-supply = <&negative5_reg>;
+            reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml b/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml
new file mode 100644
index 000000000000..d817f998cddc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/startek,kd070fhfid015.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/startek,kd070fhfid015.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Startek Electronic Technology Co. kd070fhfid015 7 inch TFT LCD panel
+
+maintainers:
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: startek,kd070fhfid015
+
+  enable-gpios: true
+
+  iovcc-supply:
+    description: Reference to the regulator powering the panel IO pins.
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  reset-gpios: true
+
+  port: true
+
+  power-supply: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - enable-gpios
+  - iovcc-supply
+  - reg
+  - reset-gpios
+  - port
+  - power-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "startek,kd070fhfid015";
+            reg = <0>;
+            enable-gpios = <&pio 67 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+            iovcc-supply = <&mt6357_vsim1_reg>;
+            power-supply = <&vsys_lcm_reg>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml
new file mode 100644
index 000000000000..2fd6e0ec3682
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/synaptics,r63353.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/synaptics,r63353.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics R63353 based MIPI-DSI panels
+
+maintainers:
+  - Michael Trimarchi <michael@amarulasolutions.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sharp,ls068b3sx02
+      - const: syna,r63353
+
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+  dvdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+  - backlight
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls068b3sx02", "syna,r63353";
+            reg = <0>;
+            avdd-supply = <&avdd_display>;
+            dvdd-supply = <&dvdd_display>;
+            reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
+            backlight = <&backlight>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mipi_dsi_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml
new file mode 100644
index 000000000000..152d94367130
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/synaptics,td4300-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics TDDI Display Panel Controller
+
+maintainers:
+  - Kaustabh Chakraborty <kauschluss@disroot.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - syna,td4101-panel
+      - syna,td4300-panel
+
+  reg:
+    maxItems: 1
+
+  vio-supply:
+    description: core I/O voltage supply
+
+  vsn-supply:
+    description: negative voltage supply for analog circuits
+
+  vsp-supply:
+    description: positive voltage supply for analog circuits
+
+  backlight-gpios:
+    maxItems: 1
+    description: backlight enable GPIO
+
+  reset-gpios: true
+  width-mm: true
+  height-mm: true
+  panel-timing: true
+
+required:
+  - compatible
+  - reg
+  - width-mm
+  - height-mm
+  - panel-timing
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "syna,td4300-panel";
+            reg = <0>;
+
+            vio-supply = <&panel_vio_reg>;
+            vsn-supply = <&panel_vsn_reg>;
+            vsp-supply = <&panel_vsp_reg>;
+
+            backlight-gpios = <&gpd3 5 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&gpd3 4 GPIO_ACTIVE_LOW>;
+
+            width-mm = <68>;
+            height-mm = <121>;
+
+            panel-timing {
+                clock-frequency = <144389520>;
+
+                hactive = <1080>;
+                hsync-len = <4>;
+                hfront-porch = <120>;
+                hback-porch = <32>;
+
+                vactive = <1920>;
+                vsync-len = <2>;
+                vfront-porch = <21>;
+                vback-porch = <4>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
index 4aa605613445..7edd29df4bbb 100644
--- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
@@ -6,16 +6,13 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Toppoly TD Panels
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Marek Belisko <marek@goldelico.com>
   - H. Nikolaus Schaller <hns@goldelico.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -25,12 +22,17 @@ properties:
         # Toppoly TD043MTEA1 Panel
       - tpo,td043mtea1
 
-  reg: true
+  reg:
+    maxItems: 1
+
   label: true
   reset-gpios: true
   backlight: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - port
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
index 6f1f02044b4b..99db268eb9b3 100644
--- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
@@ -38,9 +38,9 @@ description: |+
   The serial protocol has line names that resemble I2C but the
   protocol is not I2C but 3WIRE SPI.
 
-
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -51,7 +51,8 @@ properties:
           - const: tpo,tpg110
       - const: tpo,tpg110
 
-  reg: true
+  reg:
+    maxItems: 1
 
   grestb-gpios:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/panel/truly,nt35597-2K-display.yaml b/Documentation/devicetree/bindings/display/panel/truly,nt35597-2K-display.yaml
new file mode 100644
index 000000000000..36be09c900f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/truly,nt35597-2K-display.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/truly,nt35597-2K-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Truly NT35597 DSI 2K display
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  Truly NT35597 DSI 2K display is used on the Qualcomm SDM845 MTP board.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    const: truly,nt35597-2K-display
+
+  reg:
+    maxItems: 1
+
+  vdda-supply:
+    description: regulator that provides the supply voltage Power IC supply
+
+  vdispp-supply:
+    description: regulator that provides the supply voltage for positive LCD bias
+
+  vdispn-supply:
+    description: regulator that provides the supply voltage for negative LCD bias
+
+  reset-gpios: true
+
+  mode-gpios:
+    description:
+      Gpio for choosing the mode of the display for single DSI or Dual DSI.
+      This should be low for dual DSI and high for single DSI mode.
+
+  ports:
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vdda-supply
+  - reset-gpios
+  - mode-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "truly,nt35597-2K-display";
+            reg = <0>;
+
+            vdda-supply = <&pm8998_l14>;
+            vdispp-supply = <&lab_regulator>;
+            vdispn-supply = <&ibb_regulator>;
+
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+            mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    panel0_in: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    panel1_in: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml b/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml
new file mode 100644
index 000000000000..49dcd9b8f670
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,g2647fb105.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox G2647FB105 6.47" 1080x2340 MIPI-DSI Panel
+
+maintainers:
+  - Alexander Baransky <sanyapilot496@gmail.com>
+
+description:
+  The Visionox G2647FB105 is a 6.47 inch 1080x2340 MIPI-DSI CMD mode OLED panel.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,g2647fb105
+
+  reg:
+    maxItems: 1
+
+  vdd3p3-supply:
+    description: 3.3V source voltage rail
+
+  vddio-supply:
+    description: I/O source voltage rail
+
+  vsn-supply:
+    description: Negative source voltage rail
+
+  vsp-supply:
+    description: Positive source voltage rail
+
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd3p3-supply
+  - vddio-supply
+  - vsn-supply
+  - vsp-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "visionox,g2647fb105";
+            reg = <0>;
+
+            vdd3p3-supply = <&vreg_l7c_3p0>;
+            vddio-supply = <&vreg_l13a_1p8>;
+            vsn-supply = <&vreg_ibb>;
+            vsp-supply = <&vreg_lab>;
+
+            reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml
new file mode 100644
index 000000000000..187840bb76c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,r66451.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,r66451.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox R66451 AMOLED DSI Panel
+
+maintainers:
+  - Jessica Zhang <quic_jesszhan@quicinc.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,r66451
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddio-supply: true
+  vdd-supply: true
+  port: true
+  reset-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vdd-supply
+  - reset-gpios
+  - port
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "visionox,r66451";
+            reg = <0>;
+            vddio-supply = <&vreg_l12c_1p8>;
+            vdd-supply = <&vreg_l13c_3p0>;
+
+            reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
index 076b057b4af5..f0a82f0ff790 100644
--- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
+++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
@@ -1,13 +1,14 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Visionox model RM69299 Panels Device Tree Bindings.
+title: Visionox model RM69299 Panels
 
 maintainers:
-  - Harigovindan P <harigovi@codeaurora.org>
+  - Abhinav Kumar <quic_abhinavk@quicinc.com>
+  - Jessica Zhang <quic_jesszhan@quicinc.com>
 
 description: |
   This binding is for display panels using a Visionox RM692999 panel.
@@ -17,7 +18,12 @@ allOf:
 
 properties:
   compatible:
-    const: visionox,rm69299-1080p-display
+    enum:
+      - visionox,rm69299-1080p-display
+      - visionox,rm69299-shift
+
+  reg:
+    maxItems: 1
 
   vdda-supply:
     description: |
@@ -34,6 +40,7 @@ additionalProperties: false
 
 required:
   - compatible
+  - reg
   - vdda-supply
   - vdd3p3-supply
   - reset-gpios
@@ -41,16 +48,22 @@ required:
 
 examples:
   - |
-    panel {
-        compatible = "visionox,rm69299-1080p-display";
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "visionox,rm69299-1080p-display";
+            reg = <0>;
 
-        vdda-supply = <&src_pp1800_l8c>;
-        vdd3p3-supply = <&src_pp2800_l18a>;
+            vdda-supply = <&src_pp1800_l8c>;
+            vdd3p3-supply = <&src_pp2800_l18a>;
 
-        reset-gpios = <&pm6150l_gpio 3 0>;
-        port {
-            panel0_in: endpoint {
-                remote-endpoint = <&dsi0_out>;
+            reset-gpios = <&pm6150l_gpio 3 0>;
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm692e5.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm692e5.yaml
new file mode 100644
index 000000000000..d4b4672815fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,rm692e5.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,rm692e5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox RM692E5 6.55" 2400x1080 120Hz MIPI-DSI Panel
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+description:
+  The Visionox RM692E5 is a generic DSI Panel IC used to control
+  AMOLED panels.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - visionox,rm692e5
+      - items:
+          - enum:
+              - nothing,rm692e5-spacewar
+          - const: visionox,rm692e5
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: 3.3V source voltage rail
+
+  vddio-supply:
+    description: 1.8V I/O source voltage rail
+
+  reset-gpios: true
+  port: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd-supply
+  - vddio-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "nothing,rm692e5-spacewar",
+                         "visionox,rm692e5";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+
+            vdd-supply = <&vdd_oled>;
+            vddio-supply = <&vdd_io_oled>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&mdss_dsi0_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml
new file mode 100644
index 000000000000..d5a8295106c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,vtdr6130.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox VTDR6130 AMOLED DSI Panel
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,vtdr6130
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddio-supply: true
+  vci-supply: true
+  vdd-supply: true
+  port: true
+  reset-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vci-supply
+  - vdd-supply
+  - reset-gpios
+  - port
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "visionox,vtdr6130";
+            reg = <0>;
+
+            vddio-supply = <&vreg_l12b_1p8>;
+            vci-supply = <&vreg_l13b_3p0>;
+            vdd-supply = <&vreg_l11b_1p2>;
+
+            reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
index d5c46a3cc2b0..9c9743a23500 100644
--- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -15,8 +15,12 @@ allOf:
 properties:
   compatible:
     const: xinpeng,xpp055c272
-  reg: true
+
+  reg:
+    maxItems: 1
+
   backlight: true
+  port: true
   reset-gpios: true
   iovcc-supply:
     description: regulator that supplies the iovcc voltage
@@ -27,6 +31,7 @@ required:
   - compatible
   - reg
   - backlight
+  - port
   - iovcc-supply
   - vci-supply
 
@@ -44,6 +49,12 @@ examples:
             backlight = <&backlight>;
             iovcc-supply = <&vcc_1v8>;
             vci-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/display/renesas,cmm.yaml b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
index 561efaaa5a91..fc4933c343cd 100644
--- a/Documentation/devicetree/bindings/display/renesas,cmm.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,cmm.yaml
@@ -58,10 +58,10 @@ examples:
     #include <dt-bindings/power/r8a7796-sysc.h>
 
     cmm0: cmm@fea40000 {
-         compatible = "renesas,r8a7796-cmm",
-                      "renesas,rcar-gen3-cmm";
-         reg = <0xfea40000 0x1000>;
-         power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
-         clocks = <&cpg CPG_MOD 711>;
-         resets = <&cpg 711>;
+        compatible = "renesas,r8a7796-cmm",
+                     "renesas,rcar-gen3-cmm";
+        reg = <0xfea40000 0x1000>;
+        power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+        clocks = <&cpg CPG_MOD 711>;
+        resets = <&cpg 711>;
     };
diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
index 13efea574584..c27dfea7fc62 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
@@ -40,17 +40,33 @@ properties:
       - renesas,du-r8a77990 # for R-Car E3 compatible DU
       - renesas,du-r8a77995 # for R-Car D3 compatible DU
       - renesas,du-r8a779a0 # for R-Car V3U compatible DU
+      - renesas,du-r8a779g0 # for R-Car V4H compatible DU
+      - renesas,du-r8a779h0 # for R-Car V4M compatible DU
 
   reg:
     maxItems: 1
 
   # See compatible-specific constraints below.
-  clocks: true
-  clock-names: true
+  clocks:
+    minItems: 1
+    maxItems: 8
+
+  clock-names:
+    minItems: 1
+    maxItems: 8
+
   interrupts:
+    minItems: 1
+    maxItems: 4
     description: Interrupt specifiers, one per DU channel
-  resets: true
-  reset-names: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
 
   power-domains:
     maxItems: 1
@@ -68,25 +84,29 @@ properties:
         $ref: /schemas/graph.yaml#/properties/port
         unevaluatedProperties: false
 
-    required:
-      - port@0
-      - port@1
-
     unevaluatedProperties: false
 
   renesas,cmms:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 2
+    maxItems: 4
+    items:
+      maxItems: 1
     description:
       A list of phandles to the CMM instances present in the SoC, one for each
       available DU channel.
 
   renesas,vsps:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
     description:
       A list of phandle and channel index tuples to the VSPs that handle the
-      memory interfaces for the DU channels. The phandle identifies the VSP
-      instance that serves the DU channel, and the channel index identifies
-      the LIF instance in that VSP.
+      memory interfaces for the DU channels.
 
 required:
   - compatible
@@ -105,7 +125,6 @@ allOf:
       properties:
         clocks:
           minItems: 1
-          maxItems: 3
           items:
             - description: Functional clock
             - description: DU_DOTCLKIN0 input clock
@@ -113,7 +132,6 @@ allOf:
 
         clock-names:
           minItems: 1
-          maxItems: 3
           items:
             - const: du.0
             - pattern: '^dclkin\.[01]$'
@@ -155,7 +173,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -164,7 +181,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -172,6 +188,7 @@ allOf:
             - pattern: '^dclkin\.[01]$'
 
         interrupts:
+          minItems: 2
           maxItems: 2
 
         resets:
@@ -212,7 +229,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -221,7 +237,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -229,6 +244,7 @@ allOf:
             - pattern: '^dclkin\.[01]$'
 
         interrupts:
+          minItems: 2
           maxItems: 2
 
         resets:
@@ -267,7 +283,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -276,7 +291,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -284,6 +298,7 @@ allOf:
             - pattern: '^dclkin\.[01]$'
 
         interrupts:
+          minItems: 2
           maxItems: 2
 
         resets:
@@ -323,7 +338,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -332,7 +346,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -340,6 +353,7 @@ allOf:
             - pattern: '^dclkin\.[01]$'
 
         interrupts:
+          minItems: 2
           maxItems: 2
 
         resets:
@@ -382,7 +396,6 @@ allOf:
       properties:
         clocks:
           minItems: 3
-          maxItems: 6
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -393,7 +406,6 @@ allOf:
 
         clock-names:
           minItems: 3
-          maxItems: 6
           items:
             - const: du.0
             - const: du.1
@@ -403,6 +415,7 @@ allOf:
             - pattern: '^dclkin\.[012]$'
 
         interrupts:
+          minItems: 3
           maxItems: 3
 
         resets:
@@ -444,7 +457,6 @@ allOf:
       properties:
         clocks:
           minItems: 4
-          maxItems: 8
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -457,7 +469,6 @@ allOf:
 
         clock-names:
           minItems: 4
-          maxItems: 8
           items:
             - const: du.0
             - const: du.1
@@ -469,9 +480,11 @@ allOf:
             - pattern: '^dclkin\.[0123]$'
 
         interrupts:
+          minItems: 4
           maxItems: 4
 
         resets:
+          minItems: 2
           maxItems: 2
 
         reset-names:
@@ -498,9 +511,11 @@ allOf:
 
         renesas,cmms:
           minItems: 4
+          maxItems: 4
 
         renesas,vsps:
           minItems: 4
+          maxItems: 4
 
       required:
         - clock-names
@@ -521,7 +536,6 @@ allOf:
       properties:
         clocks:
           minItems: 3
-          maxItems: 6
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -532,7 +546,6 @@ allOf:
 
         clock-names:
           minItems: 3
-          maxItems: 6
           items:
             - const: du.0
             - const: du.1
@@ -542,9 +555,11 @@ allOf:
             - pattern: '^dclkin\.[012]$'
 
         interrupts:
+          minItems: 3
           maxItems: 3
 
         resets:
+          minItems: 2
           maxItems: 2
 
         reset-names:
@@ -569,9 +584,11 @@ allOf:
 
         renesas,cmms:
           minItems: 3
+          maxItems: 3
 
         renesas,vsps:
           minItems: 3
+          maxItems: 3
 
       required:
         - clock-names
@@ -592,7 +609,6 @@ allOf:
       properties:
         clocks:
           minItems: 3
-          maxItems: 6
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -603,7 +619,6 @@ allOf:
 
         clock-names:
           minItems: 3
-          maxItems: 6
           items:
             - const: du.0
             - const: du.1
@@ -613,9 +628,11 @@ allOf:
             - pattern: '^dclkin\.[013]$'
 
         interrupts:
+          minItems: 3
           maxItems: 3
 
         resets:
+          minItems: 2
           maxItems: 2
 
         reset-names:
@@ -640,9 +657,11 @@ allOf:
 
         renesas,cmms:
           minItems: 3
+          maxItems: 3
 
         renesas,vsps:
           minItems: 3
+          maxItems: 3
 
       required:
         - clock-names
@@ -662,14 +681,12 @@ allOf:
       properties:
         clocks:
           minItems: 1
-          maxItems: 2
           items:
             - description: Functional clock for DU0
             - description: DU_DOTCLKIN0 input clock
 
         clock-names:
           minItems: 1
-          maxItems: 2
           items:
             - const: du.0
             - const: dclkin.0
@@ -698,7 +715,7 @@ allOf:
             - port@1
 
         renesas,vsps:
-          minItems: 1
+          maxItems: 1
 
       required:
         - clock-names
@@ -719,7 +736,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -728,7 +744,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -736,6 +751,7 @@ allOf:
             - pattern: '^dclkin\.[01]$'
 
         interrupts:
+          minItems: 2
           maxItems: 2
 
         resets:
@@ -763,9 +779,11 @@ allOf:
 
         renesas,cmms:
           minItems: 2
+          maxItems: 2
 
         renesas,vsps:
           minItems: 2
+          maxItems: 2
 
       required:
         - clock-names
@@ -780,6 +798,7 @@ allOf:
           contains:
             enum:
               - renesas,du-r8a779a0
+              - renesas,du-r8a779g0
     then:
       properties:
         clocks:
@@ -787,7 +806,6 @@ allOf:
             - description: Functional clock
 
         clock-names:
-          maxItems: 1
           items:
             - const: du.0
 
@@ -816,6 +834,54 @@ allOf:
 
         renesas,vsps:
           minItems: 2
+          maxItems: 2
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a779h0
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Functional clock
+
+        clock-names:
+          items:
+            - const: du.0
+
+        interrupts:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DSI 0
+            port@1: false
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+
+        renesas,vsps:
+          maxItems: 1
 
       required:
         - clock-names
diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
new file mode 100644
index 000000000000..2cc66dcef870
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,rzg2l-du.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Display Unit (DU)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  These DT bindings describe the Display Unit embedded in the Renesas RZ/G2L
+  and RZ/V2L SoCs.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - renesas,r9a07g043u-du # RZ/G2UL
+          - renesas,r9a07g044-du # RZ/G2{L,LC}
+          - renesas,r9a09g057-du # RZ/V2H(P)
+      - items:
+          - enum:
+              - renesas,r9a07g054-du    # RZ/V2L
+          - const: renesas,r9a07g044-du # RZ/G2L fallback
+      - items:
+          - const: renesas,r9a09g056-du # RZ/V2N
+          - const: renesas,r9a09g057-du # RZ/V2H(P) fallback
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock
+      - description: Register access clock
+      - description: Video clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: pclk
+      - const: vclk
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      The connections to the DU output video ports are modeled using the OF
+      graph bindings. The number of ports and their assignment are
+      model-dependent. Each port shall have a single endpoint.
+
+    patternProperties:
+      "^port@[0-1]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+
+    unevaluatedProperties: false
+
+  renesas,vsps:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
+    description:
+      A list of phandle and channel index tuples to the VSPs that handle the
+      memory interfaces for the DU channels.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - ports
+  - renesas,vsps
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043u-du
+    then:
+      properties:
+        ports:
+          properties:
+            port@0:
+              description: DPI
+
+          required:
+            - port@0
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g044-du
+    then:
+      properties:
+        ports:
+          properties:
+            port@0:
+              description: DSI
+            port@1:
+              description: DPI
+
+          required:
+            - port@0
+            - port@1
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g057-du
+    then:
+      properties:
+        ports:
+          properties:
+            port@0:
+              description: DSI
+            port@1: false
+
+          required:
+            - port@0
+
+examples:
+  # RZ/G2L DU
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display@10890000 {
+        compatible = "renesas,r9a07g044-du";
+        reg = <0x10890000 0x10000>;
+        interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A07G044_LCDC_CLK_A>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_P>,
+                 <&cpg CPG_MOD R9A07G044_LCDC_CLK_D>;
+        clock-names = "aclk", "pclk", "vclk";
+        resets = <&cpg R9A07G044_LCDC_RESET_N>;
+        power-domains = <&cpg>;
+
+        renesas,vsps = <&vspd0 0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/renesas,shmobile-lcdc.yaml b/Documentation/devicetree/bindings/display/renesas,shmobile-lcdc.yaml
new file mode 100644
index 000000000000..9816c4cacc7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/renesas,shmobile-lcdc.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/renesas,shmobile-lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SH-Mobile LCD Controller (LCDC)
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a7740-lcdc # R-Mobile A1
+      - renesas,sh73a0-lcdc  # SH-Mobile AG5
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+    description:
+      Only the functional clock is mandatory.
+      Some of the optional clocks are model-dependent (e.g. "video" (a.k.a.
+      "vou" or "dv_clk") is available on R-Mobile A1 only).
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: fck
+      - enum: [ media, lclk, hdmi, video ]
+      - enum: [ media, lclk, hdmi, video ]
+      - enum: [ media, lclk, hdmi, video ]
+      - enum: [ media, lclk, hdmi, video ]
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: LCD port (R-Mobile A1 and SH-Mobile AG5)
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI port (R-Mobile A1 LCDC1 and SH-Mobile AG5)
+        unevaluatedProperties: false
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI-DSI port (SH-Mobile AG5)
+        unevaluatedProperties: false
+
+    required:
+      - port@0
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r8a7740-lcdc
+    then:
+      properties:
+        ports:
+          properties:
+            port@2: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,sh73a0-lcdc
+    then:
+      properties:
+        ports:
+          required:
+            - port@1
+            - port@2
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7740-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    lcd-controller@fe940000 {
+        compatible = "renesas,r8a7740-lcdc";
+        reg = <0xfe940000 0x4000>;
+        interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp1_clks R8A7740_CLK_LCDC0>,
+                 <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>,
+                 <&vou_clk>;
+        clock-names = "fck", "media", "lclk", "video";
+        power-domains = <&pd_a4lc>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                lcdc0_rgb: endpoint {
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
deleted file mode 100644
index 43561584c13a..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Rockchip RK3288 specific extensions to the Analogix Display Port
-================================
-
-Required properties:
-- compatible: "rockchip,rk3288-dp",
-	      "rockchip,rk3399-edp";
-
-- reg: physical base address of the controller and length
-
-- clocks: from common clock binding: handle to dp clock.
-	  of memory mapped region.
-
-- clock-names: from common clock binding:
-	       Required elements: "dp" "pclk"
-
-- resets: Must contain an entry for each entry in reset-names.
-	  See ../reset/reset.txt for details.
-
-- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
-- pinctrl-0: pin-control mode. should be <&edp_hpd>
-
-- reset-names: Must include the name "dp"
-
-- rockchip,grf: this soc should set GRF regs, so need get grf here.
-
-- ports: there are 2 port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-    Port 0: contained 2 endpoints, connecting to the output of vop.
-    Port 1: contained 1 endpoint, connecting to the input of panel.
-
-Optional property for different chips:
-- clocks: from common clock binding: handle to grf_vio clock.
-
-- clock-names: from common clock binding:
-	       Required elements: "grf"
-
-For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
-- phys (required)
-- phy-names (required)
-- hpd-gpios (optional)
-- force-hpd (optional)
--------------------------------------------------------------------------------
-
-Example:
-	dp-controller: dp@ff970000 {
-		compatible = "rockchip,rk3288-dp";
-		reg = <0xff970000 0x4000>;
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
-		clock-names = "dp", "pclk";
-		phys = <&dp_phy>;
-		phy-names = "dp";
-
-		rockchip,grf = <&grf>;
-		resets = <&cru 111>;
-		reset-names = "dp";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_hpd>;
-
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			edp_in: port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				edp_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_edp>;
-				};
-				edp_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_edp>;
-				};
-			};
-
-			edp_out: port@1 {
-				reg = <1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				edp_out_panel: endpoint {
-					reg = <0>;
-					remote-endpoint = <&panel_in_edp>
-				};
-			};
-		};
-	};
-
-	pinctrl {
-		edp {
-			edp_hpd: edp-hpd {
-				rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
deleted file mode 100644
index 8df7d2e393d6..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/cdn-dp-rockchip.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-Rockchip RK3399 specific extensions to the cdn Display Port
-================================
-
-Required properties:
-- compatible: must be "rockchip,rk3399-cdn-dp"
-
-- reg: physical base address of the controller and length
-
-- clocks: from common clock binding: handle to dp clock.
-
-- clock-names: from common clock binding:
-	       Required elements: "core-clk" "pclk" "spdif" "grf"
-
-- resets : a list of phandle + reset specifier pairs
-- reset-names : string of reset names
-		Required elements: "apb", "core", "dptx", "spdif"
-- power-domains : power-domain property defined with a phandle
-		  to respective power domain.
-- assigned-clocks: main clock, should be <&cru SCLK_DP_CORE>
-- assigned-clock-rates : the DP core clk frequency, shall be: 100000000
-
-- rockchip,grf: this soc should set GRF regs, so need get grf here.
-
-- ports: contain a port nodes with endpoint definitions as defined in
-	 Documentation/devicetree/bindings/media/video-interfaces.txt.
-	 contained 2 endpoints, connecting to the output of vop.
-
-- phys: from general PHY binding: the phandle for the PHY device.
-
-- extcon: extcon specifier for the Power Delivery
-
-- #sound-dai-cells = it must be 1 if your system is using 2 DAIs: I2S, SPDIF
-
--------------------------------------------------------------------------------
-
-Example:
-	cdn_dp: dp@fec00000 {
-		compatible = "rockchip,rk3399-cdn-dp";
-		reg = <0x0 0xfec00000 0x0 0x100000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
-			 <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
-		clock-names = "core-clk", "pclk", "spdif", "grf";
-		assigned-clocks = <&cru SCLK_DP_CORE>;
-		assigned-clock-rates = <100000000>;
-		power-domains = <&power RK3399_PD_HDCP>;
-		phys = <&tcphy0_dp>, <&tcphy1_dp>;
-		resets = <&cru SRST_DPTX_SPDIF_REC>;
-		reset-names = "spdif";
-		extcon = <&fusb0>, <&fusb1>;
-		rockchip,grf = <&grf>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#sound-dai-cells = <1>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			dp_in: port {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				dp_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_dp>;
-				};
-
-				dp_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_dp>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
deleted file mode 100644
index 39792f051d2d..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Rockchip specific extensions to the Synopsys Designware MIPI DSI
-================================
-
-Required properties:
-- #address-cells: Should be <1>.
-- #size-cells: Should be <0>.
-- compatible: one of
-	"rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
-	"rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
-	"rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
-- reg: Represent the physical address range of the controller.
-- interrupts: Represent the controller's interrupt to the CPU(s).
-- clocks, clock-names: Phandles to the controller's pll reference
-  clock(ref) when using an internal dphy and APB clock(pclk).
-  For RK3399, a phy config clock (phy_cfg) and a grf clock(grf)
-  are required. As described in [1].
-- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
-- ports: contain a port node with endpoint definitions as defined in [2].
-  For vopb,set the reg = <0> and set the reg = <1> for vopl.
-- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
-- video port 1 for either a panel or subsequent encoder
-
-Optional properties:
-- phys: from general PHY binding: the phandle for the PHY device.
-- phy-names: Should be "dphy" if phys references an external phy.
-- #phy-cells: Defined when used as ISP phy, should be 0.
-- power-domains: a phandle to mipi dsi power domain node.
-- resets: list of phandle + reset specifier pairs, as described in [3].
-- reset-names: string reset name, must be "apb".
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/media/video-interfaces.txt
-[3] Documentation/devicetree/bindings/reset/reset.txt
-
-Example:
-	mipi_dsi: mipi@ff960000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
-		reg = <0xff960000 0x4000>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
-		clock-names = "ref", "pclk";
-		resets = <&cru SRST_MIPIDSI0>;
-		reset-names = "apb";
-		rockchip,grf = <&grf>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			mipi_in: port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				mipi_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_mipi>;
-				};
-				mipi_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_mipi>;
-				};
-			};
-
-			mipi_out: port@1 {
-				reg = <1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				mipi_out_panel: endpoint {
-					remote-endpoint = <&panel_in_mipi>;
-				};
-			};
-		};
-
-		panel {
-			compatible ="boe,tv080wum-nl0";
-			reg = <0>;
-
-			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&lcd_en>;
-			backlight = <&backlight>;
-
-			port {
-				panel_in_mipi: endpoint {
-					remote-endpoint = <&mipi_out_panel>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
deleted file mode 100644
index cec21714f0e0..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Rockchip specific extensions to the Innosilicon HDMI
-================================
-
-Required properties:
-- compatible:
-	"rockchip,rk3036-inno-hdmi";
-- reg:
-	Physical base address and length of the controller's registers.
-- clocks, clock-names:
-	Phandle to hdmi controller clock, name should be "pclk"
-- interrupts:
-	HDMI interrupt number
-- ports:
-	Contain one port node with endpoint definitions as defined in
-	Documentation/devicetree/bindings/graph.txt.
-- pinctrl-0, pinctrl-name:
-	Switch the iomux of HPD/CEC pins to HDMI function.
-
-Example:
-hdmi: hdmi@20034000 {
-	compatible = "rockchip,rk3036-inno-hdmi";
-	reg = <0x20034000 0x4000>;
-	interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&cru  PCLK_HDMI>;
-	clock-names = "pclk";
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_ctl>;
-
-	hdmi_in: port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		hdmi_in_lcdc: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&lcdc_out_hdmi>;
-		};
-	};
-};
-
-&pinctrl {
-	hdmi {
-		hdmi_ctl: hdmi-ctl {
-			rockchip,pins = <1 8  RK_FUNC_1 &pcfg_pull_none>,
-					<1 9  RK_FUNC_1 &pcfg_pull_none>,
-					<1 10 RK_FUNC_1 &pcfg_pull_none>,
-					<1 11 RK_FUNC_1 &pcfg_pull_none>;
-		};
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
new file mode 100644
index 000000000000..d99b23b88cc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,analogix-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Analogix Display Port
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-dp
+      - rockchip,rk3399-edp
+      - rockchip,rk3588-edp
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: dp
+      - const: pclk
+      - const: grf
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: dp
+      - const: apb
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC makes use of GRF regs.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - rockchip,grf
+
+allOf:
+  - $ref: /schemas/display/bridge/analogix,dp.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3588-edp
+    then:
+      properties:
+        resets:
+          minItems: 2
+        reset-names:
+          minItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dp@ff970000 {
+      compatible = "rockchip,rk3288-dp";
+      reg = <0xff970000 0x4000>;
+      interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+      clock-names = "dp", "pclk";
+      phys = <&dp_phy>;
+      phy-names = "dp";
+      resets = <&cru 111>;
+      reset-names = "dp";
+      rockchip,grf = <&grf>;
+      pinctrl-0 = <&edp_hpd>;
+      pinctrl-names = "default";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          edp_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_edp>;
+          };
+          edp_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_edp>;
+          };
+        };
+
+        edp_out: port@1 {
+          reg = <1>;
+
+          edp_out_panel: endpoint {
+            remote-endpoint = <&panel_in_edp>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml
new file mode 100644
index 000000000000..6345f0132d43
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DW DisplayPort Transmitter
+
+maintainers:
+  - Andy Yan <andy.yan@rock-chips.com>
+
+description: |
+  The Rockchip RK3588 SoC integrates the Synopsys DesignWare DPTX controller
+  which is compliant with the DisplayPort Specification Version 1.4 with the
+  following features:
+
+  * DisplayPort 1.4a
+  * Main Link: 1/2/4 lanes
+  * Main Link Support 1.62Gbps, 2.7Gbps, 5.4Gbps and 8.1Gbps
+  * AUX channel 1Mbps
+  * Single Stream Transport(SST)
+  * Multistream Transport (MST)
+  * Type-C support (alternate mode)
+  * HDCP 2.2, HDCP 1.3
+  * Supports up to 8/10 bits per color component
+  * Supports RBG, YCbCr4:4:4, YCbCr4:2:2, YCbCr4:2:0
+  * Pixel clock up to 594MHz
+  * I2S, SPDIF audio interface
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-dp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral/APB bus clock
+      - description: DisplayPort AUX clock
+      - description: HDCP clock
+      - description: I2S interface clock
+      - description: SPDIF interfce clock
+
+  clock-names:
+    items:
+      - const: apb
+      - const: aux
+      - const: hdcp
+      - const: i2s
+      - const: spdif
+
+  phys:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for RGB/YUV input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DP output.
+
+    required:
+      - port@0
+      - port@1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - ports
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3588-power.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      dp@fde50000 {
+        compatible = "rockchip,rk3588-dp";
+        reg = <0x0 0xfde50000 0x0 0x4000>;
+        interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&cru PCLK_DP0>, <&cru CLK_AUX16M_0>,
+        <&cru CLK_DP0>, <&cru MCLK_I2S4_8CH_TX>,
+        <&cru MCLK_SPDIF2_DP0>;
+        clock-names = "apb", "aux", "hdcp", "i2s", "spdif";
+        assigned-clocks = <&cru CLK_AUX16M_0>;
+        assigned-clock-rates = <16000000>;
+        resets = <&cru SRST_DP0>;
+        phys = <&usbdp_phy0 PHY_TYPE_DP>;
+        power-domains = <&power RK3588_PD_VO0>;
+        #sound-dai-cells = <0>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            dp0_in_vp2: endpoint {
+              remote-endpoint = <&vp2_out_dp0>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            dp0_out_con0: endpoint {
+              remote-endpoint = <&dp_con0_in>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index da3b889ad8fc..9d096856a79a 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -15,6 +15,7 @@ description: |
 
 allOf:
   - $ref: ../bridge/synopsys,dw-hdmi.yaml#
+  - $ref: /schemas/sound/dai-common.yaml#
 
 properties:
   compatible:
@@ -23,10 +24,22 @@ properties:
       - rockchip,rk3288-dw-hdmi
       - rockchip,rk3328-dw-hdmi
       - rockchip,rk3399-dw-hdmi
+      - rockchip,rk3568-dw-hdmi
 
   reg-io-width:
     const: 4
 
+  avdd-0v9-supply:
+    description:
+      A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
+      varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
+      HDMI_AVDD_1V0.
+
+  avdd-1v8-supply:
+    description:
+      A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
+      SoC usually is HDMI_TX_AVDD_1V8.
+
   clocks:
     minItems: 2
     items:
@@ -36,7 +49,8 @@ properties:
       # order when present.
       - description: The HDMI CEC controller main clock
       - description: Power for GRF IO
-      - description: External clock for some HDMI PHY
+      - description: External clock for some HDMI PHY (old clock name, deprecated)
+      - description: External clock for some HDMI PHY (new name)
 
   clock-names:
     minItems: 2
@@ -47,18 +61,14 @@ properties:
           - cec
           - grf
           - vpll
+          - ref
       - enum:
           - grf
           - vpll
-      - const: vpll
-
-  ddc-i2c-bus:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description:
-      The HDMI DDC bus can be connected to either a system I2C master or the
-      functionally-reduced I2C master contained in the DWC HDMI. When connected
-      to a system I2C master this property contains a phandle to that I2C
-      master controller.
+          - ref
+      - enum:
+          - vpll
+          - ref
 
   phys:
     maxItems: 1
@@ -72,40 +82,44 @@ properties:
       The unwedge pinctrl entry shall drive the DDC SDA line low. This is
       intended to work around a hardware errata that can cause the DDC I2C
       bus to be wedged.
+    minItems: 1
     items:
       - const: default
       - const: unwedge
 
+  power-domains:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
-      port:
-        $ref: /schemas/graph.yaml#/$defs/port-base
-        unevaluatedProperties: false
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
         description: Input of the DWC HDMI TX
-
         properties:
+          endpoint:
+            description: Connection to the VOP
           endpoint@0:
-            $ref: /schemas/graph.yaml#/properties/endpoint
             description: Connection to the VOPB
-
           endpoint@1:
-            $ref: /schemas/graph.yaml#/properties/endpoint
             description: Connection to the VOPL
-
-        required:
-          - endpoint@0
-          - endpoint@1
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output of the DWC HDMI TX
 
     required:
-      - port
+      - port@0
+      - port@1
 
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       phandle to the GRF to mux vopl/vopb.
 
+  "#sound-dai-cells":
+    const: 0
+
 required:
   - compatible
   - reg
@@ -123,19 +137,26 @@ examples:
     #include <dt-bindings/clock/rk3288-cru.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3288-power.h>
 
     hdmi: hdmi@ff980000 {
         compatible = "rockchip,rk3288-dw-hdmi";
         reg = <0xff980000 0x20000>;
         reg-io-width = <4>;
-        ddc-i2c-bus = <&i2c5>;
-        rockchip,grf = <&grf>;
         interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
         clock-names = "iahb", "isfr";
+        ddc-i2c-bus = <&i2c5>;
+        power-domains = <&power RK3288_PD_VIO>;
+        rockchip,grf = <&grf>;
+        #sound-dai-cells = <0>;
 
         ports {
-            port {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
                 #address-cells = <1>;
                 #size-cells = <0>;
 
@@ -143,11 +164,20 @@ examples:
                     reg = <0>;
                     remote-endpoint = <&vopb_out_hdmi>;
                 };
+
                 hdmi_in_vopl: endpoint@1 {
                     reg = <1>;
                     remote-endpoint = <&vopl_out_hdmi>;
                 };
             };
+
+            port@1 {
+                reg = <1>;
+
+                hdmi_out_con: endpoint {
+                    remote-endpoint = <&hdmi_con_in>;
+                };
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
new file mode 100644
index 000000000000..632b48bfabb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,px30-mipi-dsi
+          - rockchip,rk3128-mipi-dsi
+          - rockchip,rk3288-mipi-dsi
+          - rockchip,rk3368-mipi-dsi
+          - rockchip,rk3399-mipi-dsi
+          - rockchip,rk3568-mipi-dsi
+          - rockchip,rv1126-mipi-dsi
+      - const: snps,dw-mipi-dsi
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    oneOf:
+      - minItems: 2
+        items:
+          - const: ref
+          - const: pclk
+          - const: phy_cfg
+          - const: grf
+      - const: pclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC uses GRF regs to switch between vopl/vopb.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  "#phy-cells":
+    const: 0
+    description:
+      Defined when in use as ISP phy.
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - rockchip,grf
+
+allOf:
+  - $ref: /schemas/display/bridge/snps,dw-mipi-dsi.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-mipi-dsi
+              - rockchip,rk3128-mipi-dsi
+              - rockchip,rk3368-mipi-dsi
+              - rockchip,rk3568-mipi-dsi
+              - rockchip,rv1126-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+      required:
+        - phys
+        - phy-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+
+        clock-names:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          minItems: 4
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mipi_dsi: dsi@ff960000 {
+      compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+      reg = <0xff960000 0x4000>;
+      interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
+      clock-names = "ref", "pclk";
+      resets = <&cru SRST_MIPIDSI0>;
+      reset-names = "apb";
+      rockchip,grf = <&grf>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mipi_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          mipi_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_mipi>;
+          };
+          mipi_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_mipi>;
+          };
+        };
+
+        mipi_out: port@1 {
+          reg = <1>;
+
+          mipi_out_panel: endpoint {
+            remote-endpoint = <&panel_in_mipi>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
new file mode 100644
index 000000000000..290376bec079
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Innosilicon HDMI controller
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-inno-hdmi
+      - rockchip,rk3128-inno-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The HDMI controller main clock
+      - description: The HDMI PHY reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ref
+
+  power-domains:
+    maxItems: 1
+
+  "#sound-dai-cells":
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a vop node.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a hdmi-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF used for control the polarity of hsync/vsync of rk3036
+      HDMI.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - pinctrl-0
+  - pinctrl-names
+  - ports
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3036-inno-hdmi
+
+    then:
+      required:
+        - rockchip,grf
+      properties:
+        power-domains: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3128-inno-hdmi
+
+    then:
+      required:
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3036-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    hdmi: hdmi@20034000 {
+      compatible = "rockchip,rk3036-inno-hdmi";
+      reg = <0x20034000 0x4000>;
+      interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru PCLK_HDMI>, <&cru SCLK_LCDC>;
+      clock-names = "pclk", "ref";
+      pinctrl-names = "default";
+      pinctrl-0 = <&hdmi_ctl>;
+      rockchip,grf = <&grf>;
+      #sound-dai-cells = <0>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi_in: port@0 {
+          reg = <0>;
+          hdmi_in_vop: endpoint {
+            remote-endpoint = <&vop_out_hdmi>;
+          };
+        };
+
+        hdmi_out: port@1 {
+          reg = <1>;
+          hdmi_out_con: endpoint {
+            remote-endpoint = <&hdmi_con_in>;
+          };
+        };
+      };
+    };
+
+    pinctrl {
+      hdmi {
+        hdmi_ctl: hdmi-ctl {
+          rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>,
+                          <1 RK_PB1 1 &pcfg_pull_none>,
+                          <1 RK_PB2 1 &pcfg_pull_none>,
+                          <1 RK_PB3 1 &pcfg_pull_none>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml
new file mode 100644
index 000000000000..03b002a05c47
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip low-voltage differential signal (LVDS) transmitter
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-lvds
+      - rockchip,rk3288-lvds
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk_lvds
+
+  avdd1v0-supply:
+    description: 1.0V analog power.
+
+  avdd1v8-supply:
+    description: 1.8V analog power.
+
+  avdd3v3-supply:
+    description: 3.3V analog power.
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the general register files syscon.
+
+  rockchip,output:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [rgb, lvds, duallvds]
+    description: This describes the output interface.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  pinctrl-names:
+    const: lcdc
+
+  pinctrl-0: true
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port 0 for the VOP input.
+          The remote endpoint maybe vopb or vopl.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port 1 for either a panel or subsequent encoder.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - rockchip,grf
+  - rockchip,output
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-lvds
+
+    then:
+      properties:
+        reg: false
+        clocks: false
+        clock-names: false
+        avdd1v0-supply: false
+        avdd1v8-supply: false
+        avdd3v3-supply: false
+
+      required:
+        - phys
+        - phy-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-lvds
+
+    then:
+      properties:
+        phys: false
+        phy-names: false
+
+      required:
+        - reg
+        - clocks
+        - clock-names
+        - avdd1v0-supply
+        - avdd1v8-supply
+        - avdd3v3-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    lvds: lvds@ff96c000 {
+      compatible = "rockchip,rk3288-lvds";
+      reg = <0xff96c000 0x4000>;
+      clocks = <&cru PCLK_LVDS_PHY>;
+      clock-names = "pclk_lvds";
+      avdd1v0-supply = <&vdd10_lcd>;
+      avdd1v8-supply = <&vcc18_lcd>;
+      avdd3v3-supply = <&vcca_33>;
+      pinctrl-names = "lcdc";
+      pinctrl-0 = <&lcdc_ctl>;
+      rockchip,grf = <&grf>;
+      rockchip,output = "rgb";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lvds_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          lvds_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_lvds>;
+          };
+          lvds_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_lvds>;
+          };
+        };
+
+        lvds_out: port@1 {
+          reg = <1>;
+
+          lvds_out_panel: endpoint {
+            remote-endpoint = <&panel_in_lvds>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
index 008c144257cb..6d4b78a36576 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
@@ -10,6 +10,9 @@ maintainers:
   - Sandy Huang <hjc@rock-chips.com>
   - Heiko Stuebner <heiko@sntech.de>
 
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
 properties:
   compatible:
     const: rockchip,rk3066-hdmi
@@ -26,14 +29,6 @@ properties:
   clock-names:
     const: hclk
 
-  pinctrl-0:
-    maxItems: 2
-
-  pinctrl-names:
-    const: default
-    description:
-      Switch the iomux for the HPD/I2C pins to HDMI function.
-
   power-domains:
     maxItems: 1
 
@@ -42,6 +37,9 @@ properties:
     description:
       This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
 
+  "#sound-dai-cells":
+    const: 0
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -91,6 +89,7 @@ examples:
       pinctrl-names = "default";
       power-domains = <&power RK3066_PD_VIO>;
       rockchip,grf = <&grf>;
+      #sound-dai-cells = <0>;
 
       ports {
         #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3399-cdn-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3399-cdn-dp.yaml
new file mode 100644
index 000000000000..1a33128e77f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3399-cdn-dp.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3399-cdn-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3399 specific extensions to the CDN Display Port
+
+maintainers:
+  - Andy Yan <andy.yan@rock-chip.com>
+  - Heiko Stuebner <heiko@sntech.de>
+  - Sandy Huang <hjc@rock-chips.com>
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: rockchip,rk3399-cdn-dp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: DP core work clock
+      - description: APB clock
+      - description: SPDIF interface clock
+      - description: GRF clock
+
+  clock-names:
+    items:
+      - const: core-clk
+      - const: pclk
+      - const: spdif
+      - const: grf
+
+  extcon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    items:
+      - description: Extcon device providing the cable state for DP PHY device 0
+      - description: Extcon device providing the cable state for DP PHY device 1
+    description:
+      List of phandle to the extcon device providing the cable state for the DP PHY.
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    minItems: 1
+    items:
+      - description: DP output to the DP PHY device 0
+      - description: DP output to the DP PHY device 1
+    description:
+      RK3399 have two DP-USB PHY, specifying one PHY which want to use, or
+      specify two PHYs here to let the driver determine which PHY to use.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input of the CDN DP
+
+        properties:
+          endpoint@0:
+            description: Connection to the VOPB
+
+          endpoint@1:
+            description: Connection to the VOPL
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output of the CDN DP
+
+    required:
+      - port@0
+      - port@1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 4
+
+  reset-names:
+    items:
+      - const: spdif
+      - const: dptx
+      - const: apb
+      - const: core
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF register to control HPD.
+
+  "#sound-dai-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - ports
+  - resets
+  - reset-names
+  - rockchip,grf
+  - "#sound-dai-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dp@fec00000 {
+            compatible = "rockchip,rk3399-cdn-dp";
+            reg = <0x0 0xfec00000 0x0 0x100000>;
+            assigned-clocks = <&cru SCLK_DP_CORE>;
+            assigned-clock-rates = <100000000>;
+            interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>, <&cru SCLK_SPDIF_REC_DPTX>,
+                    <&cru PCLK_VIO_GRF>;
+            clock-names = "core-clk", "pclk", "spdif", "grf";
+            power-domains = <&power RK3399_PD_HDCP>;
+            phys = <&tcphy0_dp>, <&tcphy1_dp>;
+            resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>,
+                    <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>;
+            reset-names = "spdif", "dptx", "apb", "core";
+            rockchip,grf = <&grf>;
+            #sound-dai-cells = <1>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                dp_in: port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    dp_in_vopb: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&vopb_out_dp>;
+                    };
+
+                    dp_in_vopl: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&vopl_out_dp>;
+                    };
+                };
+
+                dp_out: port@1 {
+                    reg = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml
new file mode 100644
index 000000000000..d649808c59da
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip DW HDMI QP TX Encoder
+
+maintainers:
+  - Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
+
+description: |
+  Rockchip RK3588 SoC integrates the Synopsys DesignWare HDMI QP TX controller
+  IP and a HDMI/eDP TX Combo PHY based on a Samsung IP block, providing the
+  following features, among others:
+
+  * Fixed Rate Link (FRL)
+  * Display Stream Compression (DSC)
+  * 4K@120Hz and 8K@60Hz video modes
+  * Variable Refresh Rate (VRR) including Quick Media Switching (QMS)
+  * Fast Vactive (FVA)
+  * SCDC I2C DDC access
+  * Multi-stream audio
+  * Enhanced Audio Return Channel (EARC)
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3576-dw-hdmi-qp
+      - rockchip,rk3588-dw-hdmi-qp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Peripheral/APB bus clock
+      - description: EARC RX biphase clock
+      - description: Reference clock
+      - description: Audio interface clock
+      - description: TMDS/FRL link clock
+      - description: Video datapath clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: earc
+      - const: ref
+      - const: aud
+      - const: hdp
+      - const: hclk_vo1
+
+  interrupts:
+    items:
+      - description: AVP Unit interrupt
+      - description: CEC interrupt
+      - description: eARC RX interrupt
+      - description: Main Unit interrupt
+      - description: HPD interrupt
+
+  interrupt-names:
+    items:
+      - const: avp
+      - const: cec
+      - const: earc
+      - const: main
+      - const: hpd
+
+  phys:
+    maxItems: 1
+    description: The HDMI/eDP PHY
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for RGB/YUV input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for HDMI/eDP output.
+
+    required:
+      - port@0
+      - port@1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: ref
+      - const: hdp
+
+  "#sound-dai-cells":
+    const: 0
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Some HDMI QP related data is accessed through SYS GRF regs.
+
+  rockchip,vo-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Additional HDMI QP related data is accessed through VO GRF regs.
+
+  frl-enable-gpios:
+    description:
+      Optional GPIO line to be asserted when operating in HDMI 2.1 FRL mode and
+      deasserted for HDMI 1.4/2.0 TMDS. It can be used to control external
+      voltage bias for HDMI data lines. When not present the HDMI encoder will
+      operate in TMDS mode only.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - phys
+  - ports
+  - resets
+  - reset-names
+  - rockchip,grf
+  - rockchip,vo-grf
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/power/rk3588-power.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      hdmi@fde80000 {
+        compatible = "rockchip,rk3588-dw-hdmi-qp";
+        reg = <0x0 0xfde80000 0x0 0x20000>;
+        clocks = <&cru PCLK_HDMITX0>,
+                 <&cru CLK_HDMITX0_EARC>,
+                 <&cru CLK_HDMITX0_REF>,
+                 <&cru MCLK_I2S5_8CH_TX>,
+                 <&cru CLK_HDMIHDP0>,
+                 <&cru HCLK_VO1>;
+        clock-names = "pclk", "earc", "ref", "aud", "hdp", "hclk_vo1";
+        interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "avp", "cec", "earc", "main", "hpd";
+        phys = <&hdptxphy0>;
+        power-domains = <&power RK3588_PD_VO1>;
+        resets = <&cru SRST_HDMITX0_REF>, <&cru SRST_HDMIHDP0>;
+        reset-names = "ref", "hdp";
+        rockchip,grf = <&sys_grf>;
+        rockchip,vo-grf = <&vo1_grf>;
+        #sound-dai-cells = <0>;
+        frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            hdmi0_in_vp0: endpoint {
+              remote-endpoint = <&vp0_out_hdmi0>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            hdmi0_out_con0: endpoint {
+              remote-endpoint = <&hdmi_con0_in>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml
new file mode 100644
index 000000000000..75cd1c13fa52
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,rk3588-mipi-dsi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI2
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3576-mipi-dsi2
+      - rockchip,rk3588-mipi-dsi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: sys
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC uses GRF regs to switch between vopl/vopb.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dcphy
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: apb
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI output node to panel.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - rockchip,grf
+  - phys
+  - phy-names
+  - ports
+  - reg
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/power/rk3588-power.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      dsi@fde20000 {
+        compatible = "rockchip,rk3588-mipi-dsi2";
+        reg = <0x0 0xfde20000 0x0 0x10000>;
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+        clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+        clock-names = "pclk", "sys";
+        resets = <&cru SRST_P_DSIHOST0>;
+        reset-names = "apb";
+        power-domains = <&power RK3588_PD_VOP>;
+        phys = <&mipidcphy0 PHY_TYPE_DPHY>;
+        phy-names = "dcphy";
+        rockchip,grf = <&vop_grf>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          dsi0_in: port@0 {
+            reg = <0>;
+          };
+
+          dsi0_out: port@1 {
+            reg = <1>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
index 7204da5eb4c5..a8d18a37cb23 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
@@ -21,6 +21,8 @@ properties:
 
   ports:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       Should contain a list of phandles pointing to display interface port
       of vop devices. vop definitions as defined in
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
deleted file mode 100644
index aaf8c44cf90f..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Rockchip RK3288 LVDS interface
-================================
-
-Required properties:
-- compatible: matching the soc type, one of
-	- "rockchip,rk3288-lvds";
-	- "rockchip,px30-lvds";
-
-- reg: physical base address of the controller and length
-	of memory mapped region.
-- clocks: must include clock specifiers corresponding to entries in the
-	clock-names property.
-- clock-names: must contain "pclk_lvds"
-
-- avdd1v0-supply: regulator phandle for 1.0V analog power
-- avdd1v8-supply: regulator phandle for 1.8V analog power
-- avdd3v3-supply: regulator phandle for 3.3V analog power
-
-- rockchip,grf: phandle to the general register files syscon
-- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
-
-- phys: LVDS/DSI DPHY (px30 only)
-- phy-names: name of the PHY, must be "dphy" (px30 only)
-
-Optional properties:
-- pinctrl-names: must contain a "lcdc" entry.
-- pinctrl-0: pin control group to be used for this controller.
-
-Required nodes:
-
-The lvds has two video ports as described by
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-Their connections are modeled using the OF graph bindings specified in
-	Documentation/devicetree/bindings/graph.txt.
-
-- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
-- video port 1 for either a panel or subsequent encoder
-
-Example:
-
-lvds_panel: lvds-panel {
-	compatible = "auo,b101ean01";
-	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
-	data-mapping = "jeida-24";
-
-	ports {
-		panel_in_lvds: endpoint {
-			remote-endpoint = <&lvds_out_panel>;
-		};
-	};
-};
-
-For Rockchip RK3288:
-
-	lvds: lvds@ff96c000 {
-		compatible = "rockchip,rk3288-lvds";
-		rockchip,grf = <&grf>;
-		reg = <0xff96c000 0x4000>;
-		clocks = <&cru PCLK_LVDS_PHY>;
-		clock-names = "pclk_lvds";
-		pinctrl-names = "lcdc";
-		pinctrl-0 = <&lcdc_ctl>;
-		avdd1v0-supply = <&vdd10_lcd>;
-		avdd1v8-supply = <&vcc18_lcd>;
-		avdd3v3-supply = <&vcca_33>;
-		rockchip,output = "rgb";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			lvds_in: port@0 {
-				reg = <0>;
-
-				lvds_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_lvds>;
-				};
-				lvds_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_lvds>;
-				};
-			};
-
-			lvds_out: port@1 {
-				reg = <1>;
-
-				lvds_out_panel: endpoint {
-					remote-endpoint = <&panel_in_lvds>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
index 6f43d885c9b3..8b5f58103dda 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -31,6 +31,7 @@ properties:
       - rockchip,rk3368-vop
       - rockchip,rk3399-vop-big
       - rockchip,rk3399-vop-lit
+      - rockchip,rv1126-vop
 
   reg:
     minItems: 1
@@ -72,12 +73,6 @@ properties:
   port:
     $ref: /schemas/graph.yaml#/properties/port
 
-  assigned-clocks:
-    maxItems: 2
-
-  assigned-clock-rates:
-    maxItems: 2
-
   iommus:
     maxItems: 1
 
@@ -121,11 +116,11 @@ examples:
         #size-cells = <0>;
         vopb_out_edp: endpoint@0 {
           reg = <0>;
-          remote-endpoint=<&edp_in_vopb>;
+          remote-endpoint = <&edp_in_vopb>;
         };
         vopb_out_hdmi: endpoint@1 {
           reg = <1>;
-          remote-endpoint=<&hdmi_in_vopb>;
+          remote-endpoint = <&hdmi_in_vopb>;
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
new file mode 100644
index 000000000000..93da1fb9adc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
@@ -0,0 +1,315 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP2)
+
+description:
+  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory buffer to
+  an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+  - Andy Yan <andyshrk@163.com>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3566-vop
+      - rockchip,rk3568-vop
+      - rockchip,rk3576-vop
+      - rockchip,rk3588-vop
+
+  reg:
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to the CRTC gamma
+          LUT address.
+
+  reg-names:
+    items:
+      - const: vop
+      - const: gamma-lut
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description:
+      For VOP version under rk3576, the interrupt is shared by several interrupt
+      sources, such as frame start (VSYNC), line flag and other interrupt status.
+      For VOP version from rk3576 there is a system interrupt for bus error, and
+      every video port has it's independent interrupts for vsync and other video
+      port related error interrupts.
+
+  interrupt-names:
+    items:
+      - const: sys
+      - const: vp0
+      - const: vp1
+      - const: vp2
+
+  # See compatible-specific constraints below.
+  clocks:
+    minItems: 5
+    items:
+      - description: Clock for ddr buffer transfer via axi.
+      - description: Clock for the ahb bus to R/W the regs.
+      - description: Pixel clock for video port 0.
+      - description: Pixel clock for video port 1.
+      - description: Pixel clock for video port 2.
+      - {}
+      - {}
+      - {}
+      - {}
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: aclk
+      - const: hclk
+      - const: dclk_vp0
+      - const: dclk_vp1
+      - const: dclk_vp2
+      - {}
+      - {}
+      - {}
+      - {}
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF regs used for control the polarity of dclk/hsync/vsync of DPI,
+      also used for query vop memory bisr enable status, etc.
+
+  rockchip,vo1-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to VO GRF regs used for control the polarity of dclk/hsync/vsync of hdmi
+      on rk3588.
+
+  rockchip,vop-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to VOP GRF regs used for control data path between vopr and hdmi/edp.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU GRF used for query vop memory bisr status on rk3588.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      "^port@[0-3]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of VP0/1/2/3.
+
+    required:
+      - port@0
+
+    unevaluatedProperties: false
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3566-vop
+              - rockchip,rk3568-vop
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+
+        clock-names:
+          maxItems: 5
+
+        interrupts:
+          maxItems: 1
+
+        interrupt-names: false
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+        rockchip,vo1-grf: false
+        rockchip,vop-grf: false
+        rockchip,pmu: false
+
+      required:
+        - rockchip,grf
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3576-vop
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          items:
+            - {}
+            - {}
+            - {}
+            - {}
+            - {}
+            - description: Alternative pixel clock provided by HDMI PHY PLL.
+
+        clock-names:
+          minItems: 5
+          items:
+            - {}
+            - {}
+            - {}
+            - {}
+            - {}
+            - const: pll_hdmiphy0
+
+        interrupts:
+          minItems: 4
+
+        interrupt-names:
+          minItems: 4
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+
+        rockchip,vo1-grf: false
+        rockchip,vop-grf: false
+
+      required:
+        - rockchip,grf
+        - rockchip,pmu
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-vop
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          items:
+            - {}
+            - {}
+            - {}
+            - {}
+            - {}
+            - description: Pixel clock for video port 3.
+            - description: Peripheral(vop grf/dsi) clock.
+            - description: Alternative pixel clock provided by HDMI0 PHY PLL.
+            - description: Alternative pixel clock provided by HDMI1 PHY PLL.
+
+        clock-names:
+          minItems: 7
+          items:
+            - {}
+            - {}
+            - {}
+            - {}
+            - {}
+            - const: dclk_vp3
+            - const: pclk_vop
+            - const: pll_hdmiphy0
+            - const: pll_hdmiphy1
+
+        interrupts:
+          maxItems: 1
+
+        interrupt-names: false
+
+        ports:
+          required:
+            - port@0
+            - port@1
+            - port@2
+            - port@3
+
+      required:
+        - rockchip,grf
+        - rockchip,vo1-grf
+        - rockchip,vop-grf
+        - rockchip,pmu
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3568-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3568-power.h>
+        bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            vop: vop@fe040000 {
+                compatible = "rockchip,rk3568-vop";
+                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+                reg-names = "vop", "gamma-lut";
+                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru ACLK_VOP>,
+                         <&cru HCLK_VOP>,
+                         <&cru DCLK_VOP0>,
+                         <&cru DCLK_VOP1>,
+                         <&cru DCLK_VOP2>;
+                clock-names = "aclk",
+                              "hclk",
+                              "dclk_vp0",
+                              "dclk_vp1",
+                              "dclk_vp2";
+                power-domains = <&power RK3568_PD_VO>;
+                rockchip,grf = <&grf>;
+                iommus = <&vop_mmu>;
+                vop_out: ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    vp0: port@0 {
+                        reg = <0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp1: port@1 {
+                        reg = <1>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp2: port@2 {
+                        reg = <2>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                };
+            };
+        };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
new file mode 100644
index 000000000000..458d399cb025
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI DDC
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: samsung,exynos4210-hdmiddc
+      - const: samsung,exynos5-hdmiddc
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ddc@50 {
+            compatible = "samsung,exynos4210-hdmiddc";
+            reg = <0x50>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml
new file mode 100644
index 000000000000..e4a68c5a1a09
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-hdmi
+      - samsung,exynos4212-hdmi
+      - samsung,exynos5420-hdmi
+      - samsung,exynos5433-hdmi
+
+  clocks:
+    minItems: 5
+    maxItems: 10
+
+  clock-names:
+    minItems: 5
+    maxItems: 10
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the HDMI DDC node.
+
+  hdmi-en-supply:
+    description:
+      Provides voltage source for DCC lines available on HDMI connector. When
+      there is no power provided for DDC epprom, some TV-sets do not pulls up
+      HPD (hot plug detect) line, what causes HDMI block to stay turned off.
+      When provided, the regulator allows TV-set correctly signal HPD event.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      A GPIO line connected to HPD
+
+  interrupts:
+    maxItems: 1
+
+  phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the HDMI PHY node.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the PMU system controller node.
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+  '#sound-dai-cells':
+    const: 0
+
+  vdd-supply:
+    description:
+      VDD 1.0V HDMI TX.
+
+  vdd_osc-supply:
+    description:
+      VDD 1.8V HDMI OSC.
+
+  vdd_pll-supply:
+    description:
+      VDD 1.0V HDMI PLL.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ddc
+  - hpd-gpios
+  - interrupts
+  - phy
+  - reg
+  - samsung,syscon-phandle
+  - '#sound-dai-cells'
+  - vdd-supply
+  - vdd_osc-supply
+  - vdd_pll-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-hdmi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Gate of HDMI IP APB bus.
+            - description: Gate of HDMI-PHY IP APB bus.
+            - description: Gate of HDMI TMDS clock.
+            - description: Gate of HDMI pixel clock.
+            - description: TMDS clock generated by HDMI-PHY.
+            - description: MUX used to switch between oscclk and tmds_clko,
+                respectively if HDMI-PHY is off and operational.
+            - description: Pixel clock generated by HDMI-PHY.
+            - description: MUX used to switch between oscclk and pixel_clko,
+                respectively if HDMI-PHY is off and operational.
+            - description: Oscillator clock, used as parent of following *_user
+                clocks in case HDMI-PHY is not operational.
+            - description: Gate of HDMI SPDIF clock.
+        clock-names:
+          items:
+            - const: hdmi_pclk
+            - const: hdmi_i_pclk
+            - const: i_tmds_clk
+            - const: i_pixel_clk
+            - const: tmds_clko
+            - const: tmds_clko_user
+            - const: pixel_clko
+            - const: pixel_clko_user
+            - const: oscclk
+            - const: i_spdif_clk
+      required:
+        - samsung,sysreg-phandle
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Gate of HDMI IP bus clock.
+            - description: Gate of HDMI special clock.
+            - description: Pixel special clock, one of the two possible inputs
+                of HDMI clock mux.
+            - description: HDMI PHY clock output, one of two possible inputs of
+                HDMI clock mux.
+            - description: It is required by the driver to switch between the 2
+                parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+                after configuration, parent is set to sclk_hdmiphy else
+                sclk_pixel.
+        clock-names:
+          items:
+            - const: hdmi
+            - const: sclk_hdmi
+            - const: sclk_pixel
+            - const: sclk_hdmiphy
+            - const: mout_hdmi
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    hdmi@13970000 {
+        compatible = "samsung,exynos5433-hdmi";
+        reg = <0x13970000 0x70000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu_disp CLK_PCLK_HDMI>,
+                 <&cmu_disp CLK_PCLK_HDMIPHY>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
+                 <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
+                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
+                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
+                 <&xxti>,
+                 <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
+        clock-names = "hdmi_pclk",
+                      "hdmi_i_pclk",
+                      "i_tmds_clk",
+                      "i_pixel_clk",
+                      "tmds_clko",
+                      "tmds_clko_user",
+                      "pixel_clko",
+                      "pixel_clko_user",
+                      "oscclk",
+                      "i_spdif_clk";
+        phy = <&hdmiphy>;
+        ddc = <&hsi2c_11>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+        samsung,sysreg-phandle = <&syscon_disp>;
+        #sound-dai-cells = <0>;
+
+        hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
+        vdd-supply = <&ldo6_reg>;
+        vdd_osc-supply = <&ldo7_reg>;
+        vdd_pll-supply = <&ldo6_reg>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                hdmi_to_tv: endpoint {
+                    remote-endpoint = <&tv_to_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                hdmi_to_mhl: endpoint {
+                    remote-endpoint = <&mhl_to_hdmi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
new file mode 100644
index 000000000000..597c9cc6a312
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Mixer
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  Samsung Exynos SoC Mixer is responsible for mixing and blending multiple data
+  inputs before passing it to an output device.  The output is passed to HDMI.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos4210-mixer
+          - samsung,exynos4212-mixer
+          - samsung,exynos5250-mixer
+          - samsung,exynos5420-mixer
+      - const: samsung,exynos5-mixer
+        deprecated: true
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Gate of Mixer IP bus clock.
+      - description: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
+      - description: HDMI Special clock, one of the two possible inputs of
+          mixer mux.
+      - description: Video Processor clock.
+      - description: Mixer mux clock.
+      - description: Mixer Special clock.
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: mixer
+      - const: hdmi
+      - const: sclk_hdmi
+      - const: vp
+      - const: mout_mixer
+      - const: sclk_mixer
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    items:
+      - description: Mixer memory region.
+      - description: Video Processor memory region.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-mixer
+              - samsung,exynos4212-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        reg:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4212-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        reg:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5-mixer
+              - samsung,exynos5250-mixer
+              - samsung,exynos5420-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        reg:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mixer@14450000 {
+        compatible = "samsung,exynos5250-mixer";
+        reg = <0x14450000 0x10000>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_MIXER>,
+                 <&clock CLK_HDMI>,
+                 <&clock CLK_SCLK_HDMI>;
+        clock-names = "mixer",
+                      "hdmi",
+                      "sclk_hdmi";
+        iommus = <&sysmmu_tv>;
+        power-domains = <&pd_disp1>;
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml
new file mode 100644
index 000000000000..dda9097a7911
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5-dp.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5250/Exynos5420 SoC Display Port
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: samsung,exynos5-dp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dp
+
+  display-timings:
+    $ref: /schemas/display/panel/display-timings.yaml#
+
+  interrupts:
+    maxItems: 1
+
+  hpd-gpios:
+    description:
+      Hotplug detect GPIO.
+      Indicates which GPIO should be used for hotplug detection
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dp
+
+  power-domains:
+    maxItems: 1
+
+  interlaced:
+    type: boolean
+    deprecated: true
+    description:
+      Interlace scan mode. Progressive if defined, interlaced if not defined.
+
+  vsync-active-high:
+    type: boolean
+    deprecated: true
+    description:
+      VSYNC polarity configuration. High if defined, low if not defined
+
+  hsync-active-high:
+    type: boolean
+    deprecated: true
+    description:
+      HSYNC polarity configuration. High if defined, low if not defined
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a dp-connector node.
+
+    required:
+      - port
+
+  samsung,hpd-gpios:
+    maxItems: 1
+    deprecated: true
+
+  samsung,ycbcr-coeff:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can parsed from drm_display_mode.
+
+  samsung,dynamic-range:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can parsed from drm_display_mode.
+
+  samsung,color-space:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can parsed from drm_display_info.
+
+  samsung,color-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can parsed from drm_display_info.
+
+  samsung,link-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can reading from monitor by dpcd method.
+
+  samsung,lane-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Deprecated prop that can reading from monitor by dpcd method.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - phys
+  - phy-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dp-controller@145b0000 {
+        compatible = "samsung,exynos5-dp";
+        reg = <0x145b0000 0x1000>;
+        clocks = <&clock CLK_DP>;
+        clock-names = "dp";
+        interrupts = <10 3>;
+        interrupt-parent = <&combiner>;
+        phys = <&dp_phy>;
+        phy-names = "dp";
+        pinctrl-0 = <&dp_hpd>;
+        pinctrl-names = "default";
+        power-domains = <&pd_disp1>;
+
+        samsung,color-space = <0>;
+        samsung,color-depth = <1>;
+        samsung,link-rate = <0x0a>;
+        samsung,lane-count = <2>;
+        hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+        ports {
+            port {
+                dp_out: endpoint {
+                    remote-endpoint = <&bridge_in>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml
new file mode 100644
index 000000000000..6380eeebb073
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  DECON (Display and Enhancement Controller) is the Display Controller for the
+  Exynos5433 series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5433-decon
+      - samsung,exynos5433-decon-tv
+
+  clocks:
+    maxItems: 11
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk_decon
+      - const: aclk_smmu_decon0x
+      - const: aclk_xiu_decon0x
+      - const: pclk_smmu_decon0x
+      - const: aclk_smmu_decon1x
+      - const: aclk_xiu_decon1x
+      - const: pclk_smmu_decon1x
+      - const: sclk_decon_vclk
+      - const: sclk_decon_eclk
+      - const: dsd
+
+  interrupts:
+    minItems: 3
+    maxItems: 4
+    description: |
+      Interrupts depend on mode of work:
+       - video mode: vsync
+       - command mode: lcd_sys
+       - command mode with software trigger: lcd_sys, te
+
+  interrupt-names:
+    minItems: 3
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+      - const: te
+
+  iommus:
+    maxItems: 2
+
+  iommu-names:
+    items:
+      - const: m0
+      - const: m1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,disp-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - ports
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@13800000 {
+        compatible = "samsung,exynos5433-decon";
+        reg = <0x13800000 0x2104>;
+        clocks = <&cmu_disp CLK_PCLK_DECON>,
+                 <&cmu_disp CLK_ACLK_DECON>,
+                 <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+                 <&cmu_disp CLK_ACLK_XIU_DECON0X>,
+                 <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+                 <&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+                 <&cmu_disp CLK_ACLK_XIU_DECON1X>,
+                 <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+                 <&cmu_disp CLK_SCLK_DECON_VCLK>,
+                 <&cmu_disp CLK_SCLK_DECON_ECLK>,
+                 <&cmu_disp CLK_SCLK_DSD>;
+        clock-names = "pclk",
+                      "aclk_decon",
+                      "aclk_smmu_decon0x",
+                      "aclk_xiu_decon0x",
+                      "pclk_smmu_decon0x",
+                      "aclk_smmu_decon1x",
+                      "aclk_xiu_decon1x",
+                      "pclk_smmu_decon1x",
+                      "sclk_decon_vclk",
+                      "sclk_decon_eclk",
+                      "dsd";
+        power-domains = <&pd_disp>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+        samsung,disp-sysreg = <&syscon_disp>;
+        iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+        iommu-names = "m0", "m1";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                decon_to_mic: endpoint {
+                    remote-endpoint = <&mic_to_decon>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml
new file mode 100644
index 000000000000..26e5017737a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-mic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Mobile Image Compressor (MIC)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  MIC (Mobile Image Compressor) resides between DECON and MIPI DSI. MIPI DSI is
+  not capable of transferring high resoltuion frame data as DECON can send. MIC
+  solves this problem by compressing the frame data by 1/2 before it is
+  transferred through MIPI DSI. The compressed frame data must be uncompressed
+  in the panel PCB.
+
+properties:
+  compatible:
+    const: samsung,exynos5433-mic
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk_mic0
+      - const: sclk_rgb_vclk_to_mic0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,disp-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg
+  - samsung,disp-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    image-processor@13930000 {
+        compatible = "samsung,exynos5433-mic";
+        reg = <0x13930000 0x48>;
+        clocks = <&cmu_disp CLK_PCLK_MIC0>,
+                 <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+        clock-names = "pclk_mic0",
+                      "sclk_rgb_vclk_to_mic0";
+        power-domains = <&pd_disp>;
+        samsung,disp-syscon = <&syscon_disp>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                mic_to_decon: endpoint {
+                    remote-endpoint = <&decon_to_mic>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                mic_to_dsi: endpoint {
+                    remote-endpoint = <&dsi_to_mic>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml
new file mode 100644
index 000000000000..14b954718008
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos7-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  DECON (Display and Enhancement Controller) is the Display Controller for the
+  Exynos7 series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7-decon
+      - samsung,exynos7870-decon
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: pclk_decon0
+      - const: aclk_decon0
+      - const: decon0_eclk
+      - const: decon0_vclk
+
+  display-timings:
+    $ref: ../panel/display-timings.yaml#
+
+  i80-if-timings:
+    type: object
+    additionalProperties: false
+    description: timing configuration for lcd i80 interface support
+    properties:
+      cs-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of address signal is enabled until
+          chip select is enabled.
+        default: 0
+
+      wr-active:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is enabled.
+        default: 1
+
+      wr-hold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is disabled until write
+          signal is disabled.
+        default: 0
+
+      wr-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS signal is enabled until
+          write signal is enabled.
+        default: 0
+
+  interrupts:
+    items:
+      - description: FIFO level
+      - description: VSYNC
+      - description: LCD system
+
+  interrupt-names:
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+
+  iommus:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+    description:
+      A phandle to a node describing a reserved framebuffer memory region.
+      For example, the splash memory region set up by the bootloader.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Output port which is connected to either a Mobile Image Compressor
+      (MIC) or a DSI Master device.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - port
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@13930000 {
+        compatible = "samsung,exynos7-decon";
+        reg = <0x13930000 0x1000>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock_disp 100>, /* PCLK_DECON_INT */
+                 <&clock_disp 101>, /* ACLK_DECON_INT */
+                 <&clock_disp 102>, /* SCLK_DECON_INT_ECLK */
+                 <&clock_disp 103>; /* SCLK_DECON_INT_EXTCLKPLL */
+        clock-names = "pclk_decon0",
+                      "aclk_decon0",
+                      "decon0_eclk",
+                      "decon0_vclk";
+        pinctrl-0 = <&lcd_clk &pwm1_out>;
+        pinctrl-names = "default";
+        port {
+            decon_to_dsi: endpoint {
+                remote-endpoint = <&dsi_to_decon>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
new file mode 100644
index 000000000000..ff685031bb2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,fimd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC Fully Interactive Mobile Display (FIMD)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6400-fimd
+      - samsung,s5pv210-fimd
+      - samsung,exynos3250-fimd
+      - samsung,exynos4210-fimd
+      - samsung,exynos5250-fimd
+      - samsung,exynos5420-fimd
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sclk_fimd
+      - const: fimd
+
+  display-timings:
+    $ref: ../panel/display-timings.yaml#
+
+  i80-if-timings:
+    type: object
+    additionalProperties: false
+    description: |
+      Timing configuration for lcd i80 interface support.
+      The parameters are defined as::
+      VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
+                        :            :            :            :            :
+      Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
+                        | cs-setup+1 |            :            :            :
+                        |<---------->|            :            :            :
+      Chip Select     ???????????????|____________:____________:____________|??
+                                     | wr-setup+1 |            | wr-hold+1  |
+                                     |<---------->|            |<---------->|
+      Write Enable    ????????????????????????????|____________|???????????????
+                                                  | wr-active+1|
+                                                  |<---------->|
+      Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
+
+    properties:
+      cs-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of address signal is enabled until
+          chip select is enabled.
+        default: 0
+
+      wr-active:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is enabled.
+        default: 1
+
+      wr-hold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is disabled until write
+          signal is disabled.
+        default: 0
+
+      wr-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS signal is enabled until
+          write signal is enabled.
+        default: 0
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  iommu-names:
+    items:
+      - const: m0
+      - const: m1
+
+  interrupts:
+    items:
+      - description: FIFO level
+      - description: VSYNC
+      - description: LCD system
+
+  interrupt-names:
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,invert-vden:
+    type: boolean
+    description:
+      Video enable signal is inverted.
+
+  samsung,invert-vclk:
+    type: boolean
+    description:
+      Video clock signal is inverted.
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to System Register syscon.
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^port@[0-4]+$":
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Contains ports with port with index::
+       0 - for CAMIF0 input,
+       1 - for CAMIF1 input,
+       2 - for CAMIF2 input,
+       3 - for parallel output,
+       4 - for write-back interface
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-fimd
+    then:
+      properties:
+        iommus:
+          minItems: 2
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+
+    fimd@11c00000 {
+        compatible = "samsung,exynos4210-fimd";
+        interrupt-parent = <&combiner>;
+        reg = <0x11c00000 0x20000>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <11 0>, <11 1>, <11 2>;
+        clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
+        clock-names = "sclk_fimd", "fimd";
+        power-domains = <&pd_lcd0>;
+        iommus = <&sysmmu_fimd0>;
+        samsung,sysreg = <&sys_reg>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        samsung,invert-vden;
+        samsung,invert-vclk;
+
+        pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+        pinctrl-names = "default";
+
+        port@3 {
+            reg = <3>;
+
+            fimd_dpi_ep: endpoint {
+                remote-endpoint = <&lcd_ep>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/sharp,ls010b7dh04.yaml b/Documentation/devicetree/bindings/display/sharp,ls010b7dh04.yaml
new file mode 100644
index 000000000000..8097f091c2a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sharp,ls010b7dh04.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sharp,ls010b7dh04.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Memory LCD panels
+
+maintainers:
+  - Alex Lanzano <lanzano.alex@gmail.com>
+
+description:
+  Sharp Memory LCDs are a series of monochrome displays that operate over
+  a SPI bus. The displays require a signal (VCOM) to be generated to prevent
+  DC bias build up resulting in pixels being unable to change. Three modes
+  can be used to provide the VCOM signal ("software", "external", "pwm").
+
+properties:
+  compatible:
+    enum:
+      - sharp,ls010b7dh04
+      - sharp,ls011b7dh03
+      - sharp,ls012b7dd01
+      - sharp,ls013b7dh03
+      - sharp,ls013b7dh05
+      - sharp,ls018b7dh02
+      - sharp,ls027b7dh01
+      - sharp,ls027b7dh01a
+      - sharp,ls032b7dd02
+      - sharp,ls044q7dh01
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  sharp,vcom-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      software - This mode relies on a software operation to send a
+      "maintain display" message to the display, toggling the vcom
+      bit on and off with each message
+
+      external - This mode relies on an external clock to generate
+      the signal on the EXTCOMM pin
+
+      pwm - This mode relies on a pwm device to generate the signal
+      on the EXTCOMM pin
+
+    enum: [software, external, pwm]
+
+  enable-gpios: true
+
+  pwms:
+    maxItems: 1
+    description: External VCOM signal
+
+required:
+  - compatible
+  - reg
+  - sharp,vcom-mode
+
+allOf:
+  - $ref: panel/panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  - if:
+      properties:
+        sharp,vcom-mode:
+          const: pwm
+    then:
+      required:
+        - pwms
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "sharp,ls013b7dh03";
+            reg = <0>;
+            spi-cs-high;
+            spi-max-frequency = <1000000>;
+            sharp,vcom-mode = "software";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
index c2499a7906f5..45ffdebc9d86 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -4,10 +4,9 @@
 $id: http://devicetree.org/schemas/display/simple-framebuffer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Simple Framebuffer Device Tree Bindings
+title: Simple Framebuffer
 
 maintainers:
-  - Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
   - Hans de Goede <hdegoede@redhat.com>
 
 description: |+
@@ -27,6 +26,11 @@ description: |+
   over control to a driver for the real hardware. The bindings for the
   hw nodes must specify which node is considered the primary node.
 
+  If a panel node is given, then the driver uses this to configure the
+  physical width and height of the display. If no panel node is given,
+  then the driver uses the width and height properties of the simplefb
+  node to estimate it.
+
   It is advised to add display# aliases to help the OS determine how
   to number things. If display# aliases are used, then if the simplefb
   node contains a display property then the /aliases/display# path
@@ -52,16 +56,23 @@ description: |+
 
 properties:
   compatible:
-    items:
-      - enum:
-          - apple,simple-framebuffer
-          - allwinner,simple-framebuffer
-          - amlogic,simple-framebuffer
+    oneOf:
+      - items:
+          - enum:
+              - apple,simple-framebuffer
+              - allwinner,simple-framebuffer
+              - amlogic,simple-framebuffer
+          - const: simple-framebuffer
       - const: simple-framebuffer
 
   reg:
     description: Location and size of the framebuffer memory
 
+  memory-region:
+    maxItems: 1
+    description: Phandle to a node describing the memory to be used for the
+      framebuffer. If present, overrides the "reg" property (if one exists).
+
   clocks:
     description: List of clocks used by the framebuffer.
 
@@ -83,20 +94,38 @@ properties:
   format:
     description: >
       Format of the framebuffer:
+        * `a1r5g5b5` - 16-bit pixels, d[15]=a, d[14:10]=r, d[9:5]=g, d[4:0]=b
+        * `a2r10g10b10` - 32-bit pixels, d[31:30]=a, d[29:20]=r, d[19:10]=g, d[9:0]=b
         * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r
+        * `a8r8g8b8` - 32-bit pixels, d[31:24]=a, d[23:16]=r, d[15:8]=g, d[7:0]=b
         * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b
+        * `r5g5b5a1` - 16-bit pixels, d[15:11]=r, d[10:6]=g, d[5:1]=b d[1:0]=a
+        * `r8g8b8` - 24-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
+        * `x1r5g5b5` - 16-bit pixels, d[14:10]=r, d[9:5]=g, d[4:0]=b
         * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b
         * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
+        * `x8b8g8r8` - 32-bit pixels, d[23:16]=b, d[15:8]=g, d[7:0]=r
     enum:
+      - a1r5g5b5
+      - a2r10g10b10
       - a8b8g8r8
+      - a8r8g8b8
       - r5g6b5
+      - r5g5b5a1
+      - r8g8b8
+      - x1r5g5b5
       - x2r10g10b10
       - x8r8g8b8
+      - x8b8g8r8
 
   display:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: Primary display hardware node
 
+  panel:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Display panel node
+
   allwinner,pipeline:
     description: Pipeline used by the framebuffer on Allwinner SoCs
     enum:
@@ -152,7 +181,6 @@ allOf:
       required:
         - amlogic,pipeline
 
-
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7567.yaml b/Documentation/devicetree/bindings/display/sitronix,st7567.yaml
new file mode 100644
index 000000000000..2eb6d00b5a25
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sitronix,st7567.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sitronix,st7567.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7567 Display Controller
+
+maintainers:
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+description:
+  Sitronix ST7567 is a driver and controller for monochrome
+  dot matrix LCD panels.
+
+allOf:
+  - $ref: panel/panel-common.yaml#
+
+properties:
+  compatible:
+    const: sitronix,st7567
+
+  reg:
+    maxItems: 1
+
+  sitronix,inverted:
+    type: boolean
+    description:
+      Display pixels are inverted, i.e. 0 is white and 1 is black.
+
+  width-mm: true
+  height-mm: true
+  panel-timing: true
+
+required:
+  - compatible
+  - reg
+  - width-mm
+  - height-mm
+  - panel-timing
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@3f {
+            compatible = "sitronix,st7567";
+            reg = <0x3f>;
+            width-mm = <37>;
+            height-mm = <27>;
+
+            panel-timing {
+                hactive = <128>;
+                vactive = <64>;
+                hback-porch = <0>;
+                vback-porch = <0>;
+                clock-frequency = <0>;
+                hfront-porch = <0>;
+                hsync-len = <0>;
+                vfront-porch = <0>;
+                vsync-len = <0>;
+            };
+          };
+     };
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7571.yaml b/Documentation/devicetree/bindings/display/sitronix,st7571.yaml
new file mode 100644
index 000000000000..b83721eb4b7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sitronix,st7571.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sitronix,st7571.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7571 Display Controller
+
+maintainers:
+  - Marcus Folkesson <marcus.folkesson@gmail.com>
+
+description:
+  Sitronix ST7571 is a driver and controller for 4-level gray
+  scale and monochrome dot matrix LCD panels.
+
+allOf:
+  - $ref: panel/panel-common.yaml#
+
+properties:
+  compatible:
+    const: sitronix,st7571
+
+  reg:
+    maxItems: 1
+
+  sitronix,grayscale:
+    type: boolean
+    description:
+      Display supports 4-level grayscale.
+
+  sitronix,inverted:
+    type: boolean
+    description:
+      Display pixels are inverted, i.e. 0 is white and 1 is black.
+
+  reset-gpios: true
+  width-mm: true
+  height-mm: true
+  panel-timing: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - width-mm
+  - height-mm
+  - panel-timing
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      display@3f {
+        compatible = "sitronix,st7571";
+        reg = <0x3f>;
+        reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+        width-mm = <37>;
+        height-mm = <27>;
+
+        panel-timing {
+          hactive = <128>;
+          vactive = <96>;
+          hback-porch = <0>;
+          vback-porch = <0>;
+          clock-frequency = <0>;
+          hfront-porch = <0>;
+          hsync-len = <0>;
+          vfront-porch = <0>;
+          vsync-len = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7586.txt b/Documentation/devicetree/bindings/display/sitronix,st7586.txt
deleted file mode 100644
index 1d0dad1210d3..000000000000
--- a/Documentation/devicetree/bindings/display/sitronix,st7586.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Sitronix ST7586 display panel
-
-Required properties:
-- compatible:	"lego,ev3-lcd".
-- a0-gpios:	The A0 signal (since this binding is for serial mode, this is
-                the pin labeled D1 on the controller, not the pin labeled A0)
-- reset-gpios:	Reset pin
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-
-Example:
-	display@0{
-		compatible = "lego,ev3-lcd";
-		reg = <0>;
-		spi-max-frequency = <10000000>;
-		a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7586.yaml b/Documentation/devicetree/bindings/display/sitronix,st7586.yaml
new file mode 100644
index 000000000000..566aaf1aeac8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sitronix,st7586.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sitronix,st7586.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sitronix ST7586 Display Controller
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+description:
+  Sitronix ST7586 is a driver and controller for 4-level gray
+  scale and monochrome dot matrix LCD panels.
+  https://topwaydisplay.com/sites/default/files/2020-04/ST7586S.pdf
+
+$ref: panel/panel-common.yaml#
+
+additionalProperties: false
+
+properties:
+  compatible:
+    const: lego,ev3-lcd
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  a0-gpios:
+    description:
+      The A0 signal (for serial mode, this is the pin labeled D1 on the
+      controller, not the pin labeled A0)
+    maxItems: 1
+
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - a0-gpios
+  - reset-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0 {
+            compatible = "lego,ev3-lcd";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
index 0cebaaefda03..3b0ebc0db8e0 100644
--- a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
+++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Sitronix ST7735R Display Panels Device Tree Bindings
+title: Sitronix ST7735R Display Panels
 
 maintainers:
   - David Lechner <david@lechnology.com>
@@ -15,6 +15,7 @@ description:
 
 allOf:
   - $ref: panel/panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -32,15 +33,13 @@ properties:
               - okaya,rh128128t
           - const: sitronix,st7715r
 
-  spi-max-frequency:
-    maximum: 32000000
-
   dc-gpios:
     maxItems: 1
     description: Display data/command selection (D/CX)
 
   backlight: true
   reg: true
+  spi-max-frequency: true
   reset-gpios: true
   rotation: true
 
@@ -48,7 +47,6 @@ required:
   - compatible
   - reg
   - dc-gpios
-  - reset-gpios
 
 additionalProperties: false
 
@@ -56,11 +54,6 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    backlight: backlight {
-            compatible = "gpio-backlight";
-            gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
-    };
-
     spi {
             #address-cells = <1>;
             #size-cells = <0>;
@@ -72,6 +65,7 @@ examples:
                     dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
                     reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
                     rotation = <270>;
+                    backlight = <&backlight>;
             };
     };
 
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd-common.yaml b/Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
new file mode 100644
index 000000000000..3e6998481a75
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/solomon,ssd-common.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Solomon OLED Display Controllers
+
+maintainers:
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+properties:
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  # Only required for SPI
+  dc-gpios:
+    description:
+      GPIO connected to the controller's D/C# (Data/Command) pin,
+      that is needed for 4-wire SPI to tell the controller if the
+      data sent is for a command register or the display data RAM
+    maxItems: 1
+
+  solomon,height:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Height in pixel of the screen driven by the controller.
+      The default value is controller-dependent.
+
+  solomon,width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Width in pixel of the screen driven by the controller.
+      The default value is controller-dependent.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
index 2ed2a7d0ca2f..153ff86fb405 100644
--- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
+++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
@@ -8,39 +8,31 @@ title: Solomon SSD1307 OLED Controller Framebuffer
 
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
+  - Javier Martinez Canillas <javierm@redhat.com>
 
 properties:
   compatible:
-    enum:
-      - solomon,ssd1305fb-i2c
-      - solomon,ssd1306fb-i2c
-      - solomon,ssd1307fb-i2c
-      - solomon,ssd1309fb-i2c
-
-  reg:
-    maxItems: 1
+    oneOf:
+      # Deprecated compatible strings
+      - enum:
+          - solomon,ssd1305fb-i2c
+          - solomon,ssd1306fb-i2c
+          - solomon,ssd1307fb-i2c
+          - solomon,ssd1309fb-i2c
+        deprecated: true
+      - enum:
+          - sinowealth,sh1106
+          - solomon,ssd1305
+          - solomon,ssd1306
+          - solomon,ssd1307
+          - solomon,ssd1309
 
   pwms:
     maxItems: 1
 
-  reset-gpios:
-    maxItems: 1
-
   vbat-supply:
     description: The supply for VBAT
 
-  solomon,height:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    default: 16
-    description:
-      Height in pixel of the screen driven by the controller
-
-  solomon,width:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    default: 96
-    description:
-      Width in pixel of the screen driven by the controller
-
   solomon,page-offset:
     $ref: /schemas/types.yaml#/definitions/uint32
     default: 1
@@ -130,13 +122,37 @@ required:
   - reg
 
 allOf:
+  - $ref: solomon,ssd-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sinowealth,sh1106
+    then:
+      properties:
+        solomon,width:
+          default: 132
+        solomon,height:
+          default: 64
+        solomon,dclk-div:
+          default: 1
+        solomon,dclk-frq:
+          default: 5
+
   - if:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1305fb-i2c
+            enum:
+              - solomon,ssd1305-i2c
+              - solomon,ssd1305
     then:
       properties:
+        solomon,width:
+          default: 132
+        solomon,height:
+          default: 64
         solomon,dclk-div:
           default: 1
         solomon,dclk-frq:
@@ -146,9 +162,15 @@ allOf:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1306fb-i2c
+            enum:
+              - solomon,ssd1306-i2c
+              - solomon,ssd1306
     then:
       properties:
+        solomon,width:
+          default: 128
+        solomon,height:
+          default: 64
         solomon,dclk-div:
           default: 1
         solomon,dclk-frq:
@@ -158,9 +180,15 @@ allOf:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1307fb-i2c
+            enum:
+              - solomon,ssd1307-i2c
+              - solomon,ssd1307
     then:
       properties:
+        solomon,width:
+          default: 128
+        solomon,height:
+          default: 39
         solomon,dclk-div:
           default: 2
         solomon,dclk-frq:
@@ -172,34 +200,67 @@ allOf:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1309fb-i2c
+            enum:
+              - solomon,ssd1309-i2c
+              - solomon,ssd1309
     then:
       properties:
+        solomon,width:
+          default: 128
+        solomon,height:
+          default: 64
         solomon,dclk-div:
           default: 1
         solomon,dclk-frq:
           default: 10
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-    i2c1 {
+    i2c {
             #address-cells = <1>;
             #size-cells = <0>;
 
-            ssd1307: oled@3c {
-                    compatible = "solomon,ssd1307fb-i2c";
+            ssd1307_i2c: oled@3c {
+                    compatible = "solomon,ssd1307";
                     reg = <0x3c>;
                     pwms = <&pwm 4 3000>;
                     reset-gpios = <&gpio2 7>;
             };
 
-            ssd1306: oled@3d {
-                    compatible = "solomon,ssd1306fb-i2c";
-                    reg = <0x3c>;
+            ssd1306_i2c: oled@3d {
+                    compatible = "solomon,ssd1306";
+                    reg = <0x3d>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    solomon,com-lrremap;
+                    solomon,com-invdir;
+                    solomon,com-offset = <32>;
+                    solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
+            };
+    };
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307_spi: oled@0 {
+                    compatible = "solomon,ssd1307";
+                    reg = <0x0>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    dc-gpios = <&gpio2 8>;
+                    spi-max-frequency = <10000000>;
+            };
+
+            ssd1306_spi: oled@1 {
+                    compatible = "solomon,ssd1306";
+                    reg = <0x1>;
                     pwms = <&pwm 4 3000>;
                     reset-gpios = <&gpio2 7>;
+                    dc-gpios = <&gpio2 8>;
+                    spi-max-frequency = <10000000>;
                     solomon,com-lrremap;
                     solomon,com-invdir;
                     solomon,com-offset = <32>;
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml b/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml
new file mode 100644
index 000000000000..dd7939989cf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/solomon,ssd132x.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd132x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD132x OLED Display Controllers
+
+maintainers:
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+properties:
+  compatible:
+    enum:
+      - solomon,ssd1322
+      - solomon,ssd1325
+      - solomon,ssd1327
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: solomon,ssd-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: solomon,ssd1322
+    then:
+      properties:
+        solomon,width:
+          default: 480
+        solomon,height:
+          default: 128
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: solomon,ssd1325
+    then:
+      properties:
+        solomon,width:
+          default: 128
+        solomon,height:
+          default: 80
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: solomon,ssd1327
+    then:
+      properties:
+        solomon,width:
+          default: 128
+        solomon,height:
+          default: 128
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            oled@3c {
+                    compatible = "solomon,ssd1327";
+                    reg = <0x3c>;
+                    reset-gpios = <&gpio2 7>;
+            };
+
+    };
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            oled@0 {
+                    compatible = "solomon,ssd1327";
+                    reg = <0x0>;
+                    reset-gpios = <&gpio2 7>;
+                    dc-gpios = <&gpio2 8>;
+                    spi-max-frequency = <10000000>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd133x.yaml b/Documentation/devicetree/bindings/display/solomon,ssd133x.yaml
new file mode 100644
index 000000000000..b7780038a34b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/solomon,ssd133x.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd133x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD133x OLED Display Controllers
+
+maintainers:
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+allOf:
+  - $ref: solomon,ssd-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - solomon,ssd1331
+
+  solomon,width:
+    default: 96
+
+  solomon,height:
+    default: 64
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        oled@0 {
+            compatible = "solomon,ssd1331";
+            reg = <0x0>;
+            reset-gpios = <&gpio2 7>;
+            dc-gpios = <&gpio2 8>;
+            spi-max-frequency = <10000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
new file mode 100644
index 000000000000..b3d5e1b96fae
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc DRM master device
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+  The Unisoc DRM master device is a virtual device needed to list all
+  DPU devices or other display interface nodes that comprise the
+  graphics subsystem.
+
+  Unisoc's display pipeline have several components as below description,
+  multi display controllers and corresponding physical interfaces.
+  For different display scenarios, dpu0 and dpu1 maybe binding to different
+  encoder.
+
+  E.g:
+  dpu0 and dpu1 both binding to DSI for dual mipi-dsi display;
+  dpu0 binding to DSI for primary display, and dpu1 binding to DP for external display;
+
+          +-----------------------------------------+
+          |                                         |
+          |                            +---------+  |
+  +----+  |   +----+    +---------+    |DPHY/CPHY|  |   +------+
+  |    +----->+dpu0+--->+MIPI|DSI +--->+Combo    +----->+Panel0|
+  |AXI |  |   +----+    +---------+    +---------+  |   +------+
+  |    |  |                  ^                      |
+  |    |  |                  |                      |
+  |    |  |      +-----------+                      |
+  |    |  |      |                                  |
+  |APB |  |   +--+-+    +-----------+    +---+      |   +------+
+  |    +----->+dpu1+--->+DisplayPort+--->+PHY+--------->+Panel1|
+  |    |  |   +----+    +-----------+    +---+      |   +------+
+  +----+  |                                         |
+          +-----------------------------------------+
+
+properties:
+  compatible:
+    const: sprd,display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      Should contain a list of phandles pointing to display interface port
+      of DPU devices.
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "sprd,display-subsystem";
+        ports = <&dpu_out>;
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
new file mode 100644
index 000000000000..8c52fa0ea5f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc Sharkl3 Display Processor Unit (DPU)
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+  DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
+  which transfers the image data from a video memory buffer to an internal
+  LCD interface.
+
+properties:
+  compatible:
+    const: sprd,sharkl3-dpu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_src_128m
+      - const: clk_src_384m
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      A port node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+      That port should be the output endpoint, usually output to
+      the associated DSI.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    dpu: dpu@63000000 {
+        compatible = "sprd,sharkl3-dpu";
+        reg = <0x63000000 0x1000>;
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "clk_src_128m", "clk_src_384m";
+
+        clocks = <&pll CLK_TWPLL_128M>,
+          <&pll CLK_TWPLL_384M>;
+
+        dpu_port: port {
+            dpu_out: endpoint {
+                remote-endpoint = <&dsi_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
new file mode 100644
index 000000000000..300bf2252c3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dsi-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc MIPI DSI Controller
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+properties:
+  compatible:
+    const: sprd,sharkl3-dsi-host
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: clk_src_96m
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description:
+          A port node with endpoint definitions as defined in
+          Documentation/devicetree/bindings/media/video-interfaces.txt.
+          That port should be the input endpoint, usually coming from
+          the associated DPU.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    dsi: dsi@63100000 {
+        compatible = "sprd,sharkl3-dsi-host";
+        reg = <0x63100000 0x1000>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "clk_src_96m";
+        clocks = <&pll CLK_TWPLL_96M>;
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&dpu_out>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
index ce1ef93cce93..53560052aaf0 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -58,13 +58,22 @@ properties:
           DSI input port node, connected to the ltdc rgb output port.
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          DSI output port node, connected to a panel or a bridge input port"
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          DSI output port node, connected to a panel or a bridge input port.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
 
 required:
-  - "#address-cells"
-  - "#size-cells"
   - compatible
   - reg
   - clocks
@@ -110,7 +119,7 @@ examples:
               };
         };
 
-        panel-dsi@0 {
+        panel@0 {
               compatible = "orisetech,otm8009a";
               reg = <0>;
               reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
@@ -125,4 +134,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index 01e2da23790b..77058a5ccf68 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -12,7 +12,10 @@ maintainers:
 
 properties:
   compatible:
-    const: st,stm32-ltdc
+    enum:
+      - st,stm32-ltdc
+      - st,stm32mp251-ltdc
+      - st,stm32mp255-ltdc
 
   reg:
     maxItems: 1
@@ -24,15 +27,23 @@ properties:
     minItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
 
   clock-names:
     items:
       - const: lcd
+      - const: bus
+      - const: ref
+      - const: lvds
+    minItems: 1
 
   resets:
     maxItems: 1
 
+  access-controllers:
+    maxItems: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: |
@@ -51,6 +62,46 @@ required:
   - resets
   - port
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32-ltdc
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp251-ltdc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp255-ltdc
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+
 additionalProperties: false
 
 examples:
@@ -75,4 +126,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
new file mode 100644
index 000000000000..14e042156179
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/st,stm32mp25-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 LVDS Display Interface Transmitter
+
+maintainers:
+  - Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
+
+description: |
+  The STMicroelectronics STM32 LVDS Display Interface Transmitter handles the
+  LVDS protocol: it maps the pixels received from the upstream Pixel-DMA (LTDC)
+  onto the LVDS PHY.
+
+  It is composed of three sub blocks:
+    - LVDS host: handles the LVDS protocol (FPD / OpenLDI) and maps its input
+      pixels onto the data lanes of the PHY
+    - LVDS PHY: parallelize the data and drives the LVDS data lanes
+    - LVDS wrapper: handles top-level settings
+
+  The LVDS controller driver supports the following high-level features:
+    - FDP-Link-I and OpenLDI (v0.95) protocols
+    - Single-Link or Dual-Link operation
+    - Single-Display or Double-Display (with the same content duplicated on both)
+    - Flexible Bit-Mapping, including JEIDA and VESA
+    - RGB888 or RGB666 output
+    - Synchronous design, with one input pixel per clock cycle
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - st,stm32mp255-lvds
+          - const: st,stm32mp25-lvds
+      - const: st,stm32mp25-lvds
+
+  "#clock-cells":
+    const: 0
+    description:
+      Provides the internal LVDS PHY clock to the framework.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB peripheral clock
+      - description: Reference clock for the internal PLL
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: ref
+
+  resets:
+    maxItems: 1
+
+  access-controllers:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          LVDS input port node, connected to the LTDC RGB output port.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          LVDS output port node, connected to a panel or bridge input port.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+    lvds: lvds@48060000 {
+        compatible = "st,stm32mp25-lvds";
+        reg = <0x48060000 0x2000>;
+        #clock-cells = <0>;
+        clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>;
+        clock-names = "pclk", "ref";
+        resets = <&rcc LVDS_R>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                lvds_in: endpoint {
+                   remote-endpoint = <&ltdc_ep1_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                lvds_out0: endpoint {
+                   remote-endpoint = <&lvds_panel_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml
index de0c678b3c29..564ea845c82e 100644
--- a/Documentation/devicetree/bindings/display/ste,mcde.yaml
+++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml
@@ -58,8 +58,8 @@ patternProperties:
   "^dsi@[0-9a-f]+$":
     description: subnodes for the three DSI host adapters
     type: object
-    allOf:
-      - $ref: dsi-controller.yaml#
+    $ref: dsi-controller.yaml#
+
     properties:
       compatible:
         const: ste,mcde-dsi
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt
deleted file mode 100644
index e4a25cedc5cf..000000000000
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-NVIDIA Tegra MIPI pad calibration controller
-
-Required properties:
-- compatible: "nvidia,tegra<chip>-mipi"
-- reg: Physical base address and length of the controller's registers.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - mipi-cal
-- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads
-  that need to be calibrated for a given device.
-
-User nodes need to contain an nvidia,mipi-calibrate property that has a
-phandle to refer to the calibration controller node and a bitmask of the pads
-that need to be calibrated.
-
-Example:
-
-	mipi: mipi@700e3000 {
-		compatible = "nvidia,tegra114-mipi";
-		reg = <0x700e3000 0x100>;
-		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
-		clock-names = "mipi-cal";
-		#nvidia,mipi-calibrate-cells = <1>;
-	};
-
-	...
-
-	host1x@50000000 {
-		...
-
-		dsi@54300000 {
-			...
-
-			nvidia,mipi-calibrate = <&mipi 0x060>;
-
-			...
-		};
-
-		...
-	};
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
new file mode 100644
index 000000000000..193ddb105283
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra114-mipi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI pad calibration controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mipi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra114-mipi
+      - nvidia,tegra124-mipi
+      - nvidia,tegra210-mipi
+      - nvidia,tegra186-mipi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: mipi-cal
+
+  power-domains:
+    maxItems: 1
+
+  "#nvidia,mipi-calibrate-cells":
+    description: The number of cells in a MIPI calibration specifier.
+      Should be 1. The single cell specifies a bitmask of the pads that
+      need to be calibrated for a given device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#nvidia,mipi-calibrate-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra114-car.h>
+
+    mipi@700e3000 {
+        compatible = "nvidia,tegra114-mipi";
+        reg = <0x700e3000 0x100>;
+        clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+        clock-names = "mipi-cal";
+        #nvidia,mipi-calibrate-cells = <1>;
+    };
+
+    dsia: dsi@54300000 {
+        compatible = "nvidia,tegra114-dsi";
+        reg = <0x54300000 0x00040000>;
+        clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+                 <&tegra_car TEGRA114_CLK_DSIALP>,
+                 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&tegra_car 48>;
+        reset-names = "dsi";
+        nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-tsec.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-tsec.yaml
new file mode 100644
index 000000000000..2c4d519a1bb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-tsec.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra114-tsec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Security co-processor
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: Tegra Security co-processor, an embedded security processor used
+  mainly to manage the HDCP encryption and keys on the HDMI link.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra114-tsec
+          - nvidia,tegra124-tsec
+          - nvidia,tegra210-tsec
+
+      - items:
+          - const: nvidia,tegra132-tsec
+          - const: nvidia,tegra124-tsec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra114-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tsec@54500000 {
+        compatible = "nvidia,tegra114-tsec";
+        reg = <0x54500000 0x00040000>;
+        interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA114_CLK_TSEC>;
+        resets = <&tegra_car TEGRA114_CLK_TSEC>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
new file mode 100644
index 000000000000..5cdbc527a560
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-dpaux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra DisplayPort AUX Interface
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra Display Port Auxiliary (DPAUX) pad controller manages two
+  pins which can be assigned to either the DPAUX channel or to an I2C
+  controller.
+
+  When configured for DisplayPort AUX operation, the DPAUX controller
+  can also be used to communicate with a DisplayPort device using the
+  AUX channel.
+
+properties:
+  $nodename:
+    pattern: "^dpaux@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-dpaux
+          - nvidia,tegra210-dpaux
+          - nvidia,tegra186-dpaux
+          - nvidia,tegra194-dpaux
+
+      - items:
+          - const: nvidia,tegra132-dpaux
+          - const: nvidia,tegra124-dpaux
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the DPAUX hardware
+      - description: reference clock
+
+  clock-names:
+    items:
+      - const: dpaux
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dpaux
+
+  power-domains:
+    maxItems: 1
+
+  i2c-bus:
+    description: Subnode where I2C slave devices are listed. This
+      subnode must be always present. If there are no I2C slave
+      devices, an empty node should be added. See ../../i2c/i2c.yaml
+      for more information.
+    type: object
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  vdd-supply:
+    description: phandle of a supply that powers the DisplayPort
+      link
+
+patternProperties:
+  "^pinmux-[a-z0-9]+$":
+    description:
+      Since only three configurations are possible, only three child
+      nodes are needed to describe the pin mux'ing options for the
+      DPAUX pads. Furthermore, given that the pad functions are only
+      applicable to a single set of pads, the child nodes only need
+      to describe the pad group the functions are being applied to
+      rather than the individual pads.
+    type: object
+    properties:
+      groups:
+        const: dpaux-io
+
+      function:
+        enum:
+          - aux
+          - i2c
+          - off
+
+    additionalProperties: false
+
+    required:
+      - groups
+      - function
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dpaux: dpaux@545c0000 {
+        compatible = "nvidia,tegra210-dpaux";
+        reg = <0x545c0000 0x00040000>;
+        interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>;
+        clock-names = "dpaux", "parent";
+        resets = <&tegra_car 181>;
+        reset-names = "dpaux";
+        power-domains = <&pd_sor>;
+
+        state_dpaux_aux: pinmux-aux {
+            groups = "dpaux-io";
+            function = "aux";
+        };
+
+        state_dpaux_i2c: pinmux-i2c {
+            groups = "dpaux-io";
+            function = "i2c";
+        };
+
+        state_dpaux_off: pinmux-off {
+            groups = "dpaux-io";
+            function = "off";
+        };
+
+        i2c-bus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
new file mode 100644
index 000000000000..6f2e22471965
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-sor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra SOR Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Serial Output Resource (SOR) can be used to drive HDMI, LVDS, eDP
+  and DP outputs.
+
+properties:
+  $nodename:
+    pattern: "^sor@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-sor
+          - nvidia,tegra210-sor
+          - nvidia,tegra210-sor1
+          - nvidia,tegra186-sor
+          - nvidia,tegra186-sor1
+          - nvidia,tegra194-sor
+
+      - items:
+          - const: nvidia,tegra132-sor
+          - const: nvidia,tegra124-sor
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 5
+    maxItems: 6
+
+  clock-names:
+    minItems: 5
+    maxItems: 6
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: sor
+
+  power-domains:
+    maxItems: 1
+
+  avdd-io-hdmi-dp-supply:
+    description: I/O supply for HDMI/DP
+
+  vdd-hdmi-dp-pll-supply:
+    description: PLL supply for HDMI/DP
+
+  hdmi-supply:
+    description: +5.0V HDMI connector supply, required for HDMI
+
+  # Tegra186 and later
+  nvidia,interface:
+    description: index of the SOR interface
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  nvidia,panel:
+    description: phandle of a display panel, required for eDP
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,xbar-cfg:
+    description: 5 cells containing the crossbar configuration.
+      Each lane of the SOR, identified by the cell's index, is
+      mapped via the crossbar to the pad specified by the cell's
+      value.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  # optional when driving an eDP output
+  nvidia,dpaux:
+    description: phandle to a DisplayPort AUX interface
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-sor
+              - nvidia,tegra194-sor
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+            - description: SOR pad output clock
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+            - const: pad
+    else:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - avdd-io-hdmi-dp-supply
+  - vdd-hdmi-dp-pll-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sor0: sor@54540000 {
+        compatible = "nvidia,tegra210-sor";
+        reg = <0x54540000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+                 <&tegra_car TEGRA210_CLK_SOR0_OUT>,
+                 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>,
+                 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+        clock-names = "sor", "out", "parent", "dp", "safe";
+        resets = <&tegra_car 182>;
+        reset-names = "sor";
+        pinctrl-0 = <&state_dpaux_aux>;
+        pinctrl-1 = <&state_dpaux_i2c>;
+        pinctrl-2 = <&state_dpaux_off>;
+        pinctrl-names = "aux", "i2c", "off";
+        power-domains = <&pd_sor>;
+
+        avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+        vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+        hdmi-supply = <&vdd_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
new file mode 100644
index 000000000000..7200095ef19e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Image Composer
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vic@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-vic
+          - nvidia,tegra210-vic
+          - nvidia,tegra186-vic
+          - nvidia,tegra194-vic
+          - nvidia,tegra234-vic
+
+      - items:
+          - const: nvidia,tegra132-vic
+          - const: nvidia,tegra124-vic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the VIC hardware
+
+  clock-names:
+    items:
+      - const: vic
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vic
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the VIC;
+      see ../interconnect/interconnect.txt for details.
+    items:
+      - description: memory read client for VIC
+      - description: memory write client for VIC
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
new file mode 100644
index 000000000000..ce4589466a18
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-dc
+      - nvidia,tegra194-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: display controller pixel clock
+
+  clock-names:
+    items:
+      - const: dc
+
+  resets:
+    items:
+      - description: display controller reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the
+      display controller; see ../interconnect/interconnect.txt
+      for details.
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read-0
+      - const: read-1
+
+  nvidia,outputs:
+    description: A list of phandles of outputs that this display
+      controller can drive.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  nvidia,head:
+    description: The number of the display controller head. This
+      is used to setup the various types of output to receive
+      video data from the given head.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - nvidia,outputs
+  - nvidia,head
+
+# see nvidia,tegra186-display.yaml for examples
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
new file mode 100644
index 000000000000..117c371ce24b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
@@ -0,0 +1,308 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Hub
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display-hub@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-display
+      - nvidia,tegra194-display
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: display hub reset
+      - description: window group 0 reset
+      - description: window group 1 reset
+      - description: window group 2 reset
+      - description: window group 3 reset
+      - description: window group 4 reset
+      - description: window group 5 reset
+
+  reset-names:
+    items:
+      - const: misc
+      - const: wgrp0
+      - const: wgrp1
+      - const: wgrp2
+      - const: wgrp3
+      - const: wgrp4
+      - const: wgrp5
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+patternProperties:
+  "^display@[0-9a-f]+$":
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-display
+    then:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display stream compression clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: dsc
+            - const: hub
+    else:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: hub
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra186-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "dsc", "hub";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&sor0 &sor1>;
+            nvidia,head = <2>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra194-mc.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra194-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "hub";
+
+        power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <2>;
+        };
+
+        display@15230000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15230000 0x10000>;
+            interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
new file mode 100644
index 000000000000..da75b71e8ece
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dsi-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI DSI pad controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^padctl@[0-9a-f]+$"
+
+  compatible:
+    const: nvidia,tegra186-dsi-padctl
+
+  reg:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+allOf:
+  - $ref: /schemas/reset/reset.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    padctl@15880000 {
+        compatible = "nvidia,tegra186-dsi-padctl";
+        reg = <0x15880000 0x10000>;
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-csi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-csi.yaml
new file mode 100644
index 000000000000..a1aea9590769
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-csi.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 CSI controller
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-csi
+      - nvidia,tegra30-csi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: module clock
+      - description: PAD A clock
+      - description: PAD B clock
+
+  clock-names:
+    items:
+      - const: csi
+      - const: csia-pad
+      - const: csib-pad
+
+  avdd-dsi-csi-supply:
+    description: DSI/CSI power supply. Must supply 1.2 V.
+
+  power-domains:
+    maxItems: 1
+
+  "#nvidia,mipi-calibrate-cells":
+    description:
+      The number of cells in a MIPI calibration specifier. Should be 1.
+      The single cell specifies an id of the pad that need to be
+      calibrated for a given device. Valid pad ids for receiver would be
+      0 for CSI-A; 1 for CSI-B; 2 for DSI-A and 3 for DSI-B.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: channel 0 represents CSI-A and 1 represents CSI-B
+    additionalProperties: false
+
+    properties:
+      reg:
+        maximum: 1
+
+      nvidia,mipi-calibrate:
+        description: Should contain a phandle and a specifier specifying
+          which pad is used by this CSI channel and needs to be calibrated.
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: port receiving the video stream from the sensor
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: port sending the video stream to the VI
+
+    required:
+      - reg
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+      - port@1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-csi
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra30-csi
+    then:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          minItems: 3
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
new file mode 100644
index 000000000000..69be95afd562
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^dc@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dc
+          - nvidia,tegra30-dc
+          - nvidia,tegra114-dc
+          - nvidia,tegra124-dc
+          - nvidia,tegra210-dc
+
+      - items:
+          - const: nvidia,tegra124-dc
+          - const: nvidia,tegra132-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: display controller pixel clock
+      - description: parent clock # optional
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: dc
+      - const: parent # optional
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  interconnect-names: true
+  interconnects: true
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  memory-region: true
+
+  nvidia,head:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of the display controller head. This is used to setup the various
+      types of output to receive video data from the given head.
+
+  nvidia,outputs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A list of phandles of outputs that this display controller can drive.
+
+  rgb:
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dc
+              - nvidia,tegra30-dc
+              - nvidia,tegra114-dc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window B memory client (vertical filter)
+            - description: window C memory client
+            - description: cursor memory client
+
+        interconnect-names:
+          items:
+            - const: wina
+            - const: winb
+            - const: winb-vfilter
+            - const: winc
+            - const: cursor
+
+        rgb:
+          description: Each display controller node has a child node, named "rgb", that represents
+            the RGB output associated with the controller.
+          type: object
+          properties:
+            nvidia,ddc-i2c-bus:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of an I2C controller used for DDC EDID probing
+
+            nvidia,hpd-gpio:
+              description: specifies a GPIO used for hotplug detection
+              maxItems: 1
+
+            nvidia,edid:
+              $ref: /schemas/types.yaml#/definitions/uint8-array
+              description: supplies a binary EDID blob
+
+            nvidia,panel:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of a display panel
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra124-dc
+    then:
+      properties:
+        interconnects:
+          minItems: 4
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window C memory client
+            - description: cursor memory client
+            - description: window D memory client
+            - description: window T memory client
+
+        interconnect-names:
+          minItems: 4
+          items:
+            - const: wina
+            - const: winb
+            - const: winc
+            - const: cursor
+            - const: wind
+            - const: wint
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dc@54200000 {
+        compatible = "nvidia,tegra20-dc";
+        reg = <0x54200000 0x00040000>;
+        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+        clock-names = "dc";
+        resets = <&tegra_car 27>;
+        reset-names = "dc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
new file mode 100644
index 000000000000..59e1dc0813e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Serial Interface
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dsi
+          - nvidia,tegra30-dsi
+          - nvidia,tegra114-dsi
+          - nvidia,tegra124-dsi
+          - nvidia,tegra210-dsi
+          - nvidia,tegra186-dsi
+
+      - items:
+          - const: nvidia,tegra132-dsi
+          - const: nvidia,tegra124-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+  avdd-dsi-csi-supply:
+    description: phandle of a supply that powers the DSI controller
+
+  nvidia,mipi-calibrate:
+    description: Should contain a phandle and a specifier specifying
+      which pads are used by this DSI output and need to be
+      calibrated. See nvidia,tegra114-mipi.yaml for details.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,ganged-mode:
+    description: contains a phandle to a second DSI controller to
+      gang up with in order to support up to 8 data lanes
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dsi
+              - nvidia,tegra30-dsi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: parent
+    else:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: low-power module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: lp
+            - const: parent
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-dsi
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    dsi@15300000 {
+        compatible = "nvidia,tegra186-dsi";
+        reg = <0x15300000 0x10000>;
+        interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_DSI>,
+                 <&bpmp TEGRA186_CLK_DSIA_LP>,
+                 <&bpmp TEGRA186_CLK_PLLD>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
new file mode 100644
index 000000000000..334f5531b243
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-epp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Encoder Pre-Processor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^epp@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-epp
+          - nvidia,tegra30-epp
+          - nvidia,tegra114-epp
+          - nvidia,tegra124-epp
+
+      - items:
+          - const: nvidia,tegra132-epp
+          - const: nvidia,tegra124-epp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: epp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    epp@540c0000 {
+        compatible = "nvidia,tegra20-epp";
+        reg = <0x540c0000 0x00040000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_EPP>;
+        resets = <&tegra_car 19>;
+        reset-names = "epp";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
new file mode 100644
index 000000000000..1026b0bc3dc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 2D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr2d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr2d
+      - nvidia,tegra30-gr2d
+      - nvidia,tegra114-gr2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    items:
+      - const: 2d
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    gr2d@54140000 {
+        compatible = "nvidia,tegra20-gr2d";
+        reg = <0x54140000 0x00040000>;
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+        resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+        reset-names = "2d", "mc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
new file mode 100644
index 000000000000..59a52e732ca3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 3D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr3d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr3d
+      - nvidia,tegra30-gr3d
+      - nvidia,tegra114-gr3d
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    minItems: 2
+    maxItems: 4
+
+  reset-names:
+    minItems: 2
+    maxItems: 4
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  interconnects:
+    minItems: 4
+    maxItems: 10
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 10
+
+  operating-points-v2: true
+
+  power-domains:
+    minItems: 1
+    maxItems: 2
+
+  power-domain-names:
+    maxItems: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra20-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 4
+          maxItems: 4
+
+        interconnect-names:
+          minItems: 4
+          maxItems: 4
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra30-gr3d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary module clock
+            - description: secondary module clock
+
+        clock-names:
+          items:
+            - const: 3d
+            - const: 3d2
+
+        resets:
+          items:
+            - description: primary module reset
+            - description: secondary module reset
+            - description: primary memory client hotflush reset
+            - description: secondary memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: 3d2
+            - const: mc
+            - const: mc2
+
+        iommus:
+          minItems: 2
+          maxItems: 2
+
+        interconnects:
+          minItems: 8
+          maxItems: 8
+
+        interconnect-names:
+          minItems: 8
+          maxItems: 8
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+            - description: phandle to the TD2 power domain
+
+        power-domain-names:
+          items:
+            - const: 3d0
+            - const: 3d1
+
+      dependencies:
+        power-domains: [ power-domain-names ]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra114-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 10
+          maxItems: 10
+
+        interconnect-names:
+          minItems: 10
+          maxItems: 10
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    gr3d@54180000 {
+        compatible = "nvidia,tegra20-gr3d";
+        reg = <0x54180000 0x00040000>;
+        clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+        resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+        reset-names = "3d", "mc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
new file mode 100644
index 000000000000..f77197e4869f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDMI Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^hdmi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-hdmi
+          - nvidia,tegra30-hdmi
+          - nvidia,tegra114-hdmi
+          - nvidia,tegra124-hdmi
+
+      - items:
+          - const: nvidia,tegra132-hdmi
+          - const: nvidia,tegra124-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: parent clock
+
+  clock-names:
+    items:
+      - const: hdmi
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: hdmi
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  hdmi-supply:
+    description: supply for the +5V HDMI connector pin
+
+  vdd-supply:
+    description: regulator for supply voltage
+
+  pll-supply:
+    description: regulator for PLL
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  "#sound-dai-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - pll-supply
+  - vdd-supply
+  - nvidia,ddc-i2c-bus
+  - nvidia,hpd-gpio
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+
+    hdmi@54280000 {
+        compatible = "nvidia,tegra124-hdmi";
+        reg = <0x54280000 0x00040000>;
+        interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+                 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+        clock-names = "hdmi", "parent";
+        resets = <&tegra_car 51>;
+        reset-names = "hdmi";
+
+        hdmi-supply = <&vdd_5v0_hdmi>;
+        pll-supply = <&vdd_hdmi_pll>;
+        vdd-supply = <&vdd_3v3_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
deleted file mode 100644
index 8a6d3e1ee306..000000000000
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ /dev/null
@@ -1,622 +0,0 @@
-NVIDIA Tegra host1x
-
-Required properties:
-- compatible: "nvidia,tegra<chip>-host1x"
-- reg: Physical base address and length of the controller's registers.
-  For pre-Tegra186, one entry describing the whole register area.
-  For Tegra186, one entry for each entry in reg-names:
-    "vm" - VM region assigned to Linux
-    "hypervisor" - Hypervisor region (only if Linux acts as hypervisor)
-- interrupts: The interrupt outputs from the controller.
-- #address-cells: The number of cells used to represent physical base addresses
-  in the host1x address space. Should be 1.
-- #size-cells: The number of cells used to represent the size of an address
-  range in the host1x address space. Should be 1.
-- ranges: The mapping of the host1x address space to the CPU address space.
-- clocks: Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - host1x
-
-Each host1x client module having to perform DMA through the Memory Controller
-should have the interconnect endpoints set to the Memory Client and External
-Memory respectively.
-
-The host1x top-level node defines a number of children, each representing one
-of the following host1x client modules:
-
-- mpe: video encoder
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-mpe"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - mpe
-
-  Optional properties:
-  - interconnects: Must contain entry for the MPE memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- vi: video input
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-vi"
-  - reg: Physical base address and length of the controller registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - Tegra20/Tegra30/Tegra114/Tegra124:
-    - resets: Must contain an entry for each entry in reset-names.
-      See ../reset/reset.txt for details.
-    - reset-names: Must include the following entries:
-      - vi
-  - Tegra210:
-    - power-domains: Must include venc powergate node as vi is in VE partition.
-
-  ports (optional node)
-  vi can have optional ports node and max 6 ports are supported. Each port
-  should have single 'endpoint' child node. All port nodes are grouped under
-  ports node. Please refer to the bindings defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt
-
-  csi (required node)
-  Tegra210 has CSI part of VI sharing same host interface and register space.
-  So, VI device node should have CSI child node.
-
-    - csi: mipi csi interface to vi
-
-      Required properties:
-      - compatible: "nvidia,tegra210-csi"
-      - reg: Physical base address offset to parent and length of the controller
-        registers.
-      - clocks: Must contain entries csi, cilab, cilcd, cile, csi_tpg clocks.
-        See ../clocks/clock-bindings.txt for details.
-      - power-domains: Must include sor powergate node as csicil is in
-        SOR partition.
-
-      channel (optional nodes)
-      Maximum 6 channels are supported with each csi brick as either x4 or x2
-      based on hw connectivity to sensor.
-
-      Required properties:
-      - reg: csi port number. Valid port numbers are 0 through 5.
-      - nvidia,mipi-calibrate: Should contain a phandle and a specifier
-        specifying which pads are used by this CSI port and need to be
-	calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt.
-
-      Each channel node must contain 2 port nodes which can be grouped
-      under 'ports' node and each port should have a single child 'endpoint'
-      node.
-
-        ports node
-        Please refer to the bindings defined in
-        Documentation/devicetree/bindings/media/video-interfaces.txt
-
-        ports node must contain below 2 port nodes.
-        port@0 with single child 'endpoint' node always a sink.
-        port@1 with single child 'endpoint' node always a source.
-
-        port@0 (required node)
-        Required properties:
-        - reg: 0
-
-	  endpoint (required node)
-	  Required properties:
-	  - data-lanes: an array of data lane from 1 to 8. Valid array
-	    lengths are 1/2/4/8.
-	  - remote-endpoint: phandle to sensor 'endpoint' node.
-
-        port@1 (required node)
-        Required properties:
-        - reg: 1
-
-	  endpoint (required node)
-	  Required properties:
-	  - remote-endpoint: phandle to vi port 'endpoint' node.
-
-  Optional properties:
-  - interconnects: Must contain entry for the VI memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- epp: encoder pre-processor
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-epp"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - epp
-
-  Optional properties:
-  - interconnects: Must contain entry for the EPP memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- isp: image signal processor
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-isp"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - isp
-
-  Optional properties:
-  - interconnects: Must contain entry for the ISP memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- gr2d: 2D graphics engine
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-gr2d"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - 2d
-
-  Optional properties:
-  - interconnects: Must contain entry for the GR2D memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- gr3d: 3D graphics engine
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-gr3d"
-  - reg: Physical base address and length of the controller's registers.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    (This property may be omitted if the only clock in the list is "3d")
-    - 3d
-      This MUST be the first entry.
-    - 3d2 (Only required on SoCs with two 3D clocks)
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - 3d
-    - 3d2 (Only required on SoCs with two 3D clocks)
-
-  Optional properties:
-  - interconnects: Must contain entry for the GR3D memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- dc: display controller
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-dc"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dc
-      This MUST be the first entry.
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dc
-  - nvidia,head: The number of the display controller head. This is used to
-    setup the various types of output to receive video data from the given
-    head.
-
-  Each display controller node has a child node, named "rgb", that represents
-  the RGB output associated with the controller. It can take the following
-  optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - interconnects: Must contain entry for the DC memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- hdmi: High Definition Multimedia Interface
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-hdmi"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - hdmi-supply: supply for the +5V HDMI connector pin
-  - vdd-supply: regulator for supply voltage
-  - pll-supply: regulator for PLL
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - hdmi
-      This MUST be the first entry.
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - hdmi
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-
-- tvo: TV encoder output
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-tvo"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-
-- dsi: display serial interface
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-dsi"
-  - reg: Physical base address and length of the controller's registers.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dsi
-      This MUST be the first entry.
-    - lp
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dsi
-  - avdd-dsi-supply: phandle of a supply that powers the DSI controller
-  - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
-    which pads are used by this DSI output and need to be calibrated. See also
-    ../display/tegra/nvidia,tegra114-mipi.txt.
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang
-    up with in order to support up to 8 data lanes
-
-- sor: serial output resource
-
-  Required properties:
-  - compatible: Should be:
-    - "nvidia,tegra124-sor": for Tegra124 and Tegra132
-    - "nvidia,tegra132-sor": for Tegra132
-    - "nvidia,tegra210-sor": for Tegra210
-    - "nvidia,tegra210-sor1": for Tegra210
-    - "nvidia,tegra186-sor": for Tegra186
-    - "nvidia,tegra186-sor1": for Tegra186
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - sor: clock input for the SOR hardware
-    - out: SOR output clock
-    - parent: input for the pixel clock
-    - dp: reference clock for the SOR clock
-    - safe: safe reference for the SOR clock during power up
-
-    For Tegra186 and later:
-    - pad: SOR pad output clock (on Tegra186 and later)
-
-    Obsolete:
-    - source: source clock for the SOR clock (obsolete, use "out" instead)
-
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - sor
-
-  Required properties on Tegra186 and later:
-  - nvidia,interface: index of the SOR interface
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane
-    of the SOR, identified by the cell's index, is mapped via the crossbar to
-    the pad specified by the cell's value.
-
-  Optional properties when driving an eDP output:
-  - nvidia,dpaux: phandle to a DispayPort AUX interface
-
-- dpaux: DisplayPort AUX interface
-  - compatible : Should contain one of the following:
-    - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132
-    - "nvidia,tegra210-dpaux": for Tegra210
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dpaux: clock input for the DPAUX hardware
-    - parent: reference clock
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dpaux
-  - vdd-supply: phandle of a supply that powers the DisplayPort link
-  - i2c-bus: Subnode where I2C slave devices are listed. This subnode
-    must be always present. If there are no I2C slave devices, an empty
-    node should be added. See ../../i2c/i2c.txt for more information.
-
-  See ../pinctrl/nvidia,tegra124-dpaux-padctl.txt for information
-  regarding the DPAUX pad controller bindings.
-
-- vic: Video Image Compositor
-  - compatible : "nvidia,tegra<chip>-vic"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - vic: clock input for the VIC hardware
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - vic
-
-  Optional properties:
-  - interconnects: Must contain entry for the VIC memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-Example:
-
-/ {
-	...
-
-	host1x {
-		compatible = "nvidia,tegra20-host1x", "simple-bus";
-		reg = <0x50000000 0x00024000>;
-		interrupts = <0 65 0x04   /* mpcore syncpt */
-			      0 67 0x04>; /* mpcore general */
-		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0x54000000 0x54000000 0x04000000>;
-
-		mpe {
-			compatible = "nvidia,tegra20-mpe";
-			reg = <0x54040000 0x00040000>;
-			interrupts = <0 68 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_MPE>;
-			resets = <&tegra_car 60>;
-			reset-names = "mpe";
-		};
-
-		vi@54080000 {
-			compatible = "nvidia,tegra210-vi";
-			reg = <0x0 0x54080000 0x0 0x700>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
-			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
-
-			clocks = <&tegra_car TEGRA210_CLK_VI>;
-			power-domains = <&pd_venc>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0x0 0x0 0x54080000 0x2000>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					imx219_vi_in0: endpoint {
-						remote-endpoint = <&imx219_csi_out0>;
-					};
-				};
-			};
-
-			csi@838 {
-				compatible = "nvidia,tegra210-csi";
-				reg = <0x838 0x1300>;
-				assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
-						  <&tegra_car TEGRA210_CLK_CILCD>,
-						  <&tegra_car TEGRA210_CLK_CILE>,
-						  <&tegra_car TEGRA210_CLK_CSI_TPG>;
-				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
-							 <&tegra_car TEGRA210_CLK_PLL_P>,
-							 <&tegra_car TEGRA210_CLK_PLL_P>;
-				assigned-clock-rates = <102000000>,
-						       <102000000>,
-						       <102000000>,
-						       <972000000>;
-
-				clocks = <&tegra_car TEGRA210_CLK_CSI>,
-					 <&tegra_car TEGRA210_CLK_CILAB>,
-					 <&tegra_car TEGRA210_CLK_CILCD>,
-					 <&tegra_car TEGRA210_CLK_CILE>,
-					 <&tegra_car TEGRA210_CLK_CSI_TPG>;
-				clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
-				power-domains = <&pd_sor>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				channel@0 {
-					reg = <0>;
-					nvidia,mipi-calibrate = <&mipi 0x001>;
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-							imx219_csi_in0: endpoint {
-								data-lanes = <1 2>;
-								remote-endpoint = <&imx219_out0>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-							imx219_csi_out0: endpoint {
-								remote-endpoint = <&imx219_vi_in0>;
-							};
-						};
-					};
-				};
-			};
-		};
-
-		epp {
-			compatible = "nvidia,tegra20-epp";
-			reg = <0x540c0000 0x00040000>;
-			interrupts = <0 70 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_EPP>;
-			resets = <&tegra_car 19>;
-			reset-names = "epp";
-		};
-
-		isp {
-			compatible = "nvidia,tegra20-isp";
-			reg = <0x54100000 0x00040000>;
-			interrupts = <0 71 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_ISP>;
-			resets = <&tegra_car 23>;
-			reset-names = "isp";
-		};
-
-		gr2d {
-			compatible = "nvidia,tegra20-gr2d";
-			reg = <0x54140000 0x00040000>;
-			interrupts = <0 72 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
-		};
-
-		gr3d {
-			compatible = "nvidia,tegra20-gr3d";
-			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
-		};
-
-		dc@54200000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54200000 0x00040000>;
-			interrupts = <0 73 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-
-			interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
-					<&mc TEGRA20_MC_DISPLAY0B &emc>,
-					<&mc TEGRA20_MC_DISPLAY0C &emc>,
-					<&mc TEGRA20_MC_DISPLAYHC &emc>;
-			interconnect-names = "wina",
-					     "winb",
-					     "winc",
-					     "cursor";
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		dc@54240000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54240000 0x00040000>;
-			interrupts = <0 74 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-
-			interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
-					<&mc TEGRA20_MC_DISPLAY0BB &emc>,
-					<&mc TEGRA20_MC_DISPLAY0CB &emc>,
-					<&mc TEGRA20_MC_DISPLAYHCB &emc>;
-			interconnect-names = "wina",
-					     "winb",
-					     "winc",
-					     "cursor";
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		hdmi {
-			compatible = "nvidia,tegra20-hdmi";
-			reg = <0x54280000 0x00040000>;
-			interrupts = <0 75 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
-				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-		};
-
-		tvo {
-			compatible = "nvidia,tegra20-tvo";
-			reg = <0x542c0000 0x00040000>;
-			interrupts = <0 76 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_TVO>;
-			status = "disabled";
-		};
-
-		dsi {
-			compatible = "nvidia,tegra20-dsi";
-			reg = <0x54300000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_DSI>,
-				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-			clock-names = "dsi", "parent";
-			resets = <&tegra_car 48>;
-			reset-names = "dsi";
-			status = "disabled";
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
new file mode 100644
index 000000000000..3563378a01af
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
@@ -0,0 +1,441 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-host1x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra host1x controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The host1x top-level node defines a number of children, each
+  representing one of the host1x client modules defined in this binding.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-host1x
+          - nvidia,tegra30-host1x
+          - nvidia,tegra114-host1x
+          - nvidia,tegra124-host1x
+          - nvidia,tegra210-host1x
+          - nvidia,tegra186-host1x
+          - nvidia,tegra194-host1x
+          - nvidia,tegra234-host1x
+
+      - items:
+          - const: nvidia,tegra132-host1x
+          - const: nvidia,tegra124-host1x
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    minItems: 1
+    maxItems: 9
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 9
+
+  '#address-cells':
+    description: The number of cells used to represent physical base addresses
+      in the host1x address space.
+    enum: [1, 2]
+
+  '#size-cells':
+    description: The number of cells used to represent the size of an address
+      range in the host1x address space.
+    enum: [1, 2]
+
+  ranges:
+    maxItems: 1
+
+  clocks:
+    description: Must contain one entry, for the module clock. See
+      ../clocks/clock-bindings.txt for details.
+
+  clock-names:
+    items:
+      - const: host1x
+
+  resets:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - const: host1x
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory read client for host1x
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-host1x
+              - nvidia,tegra30-host1x
+              - nvidia,tegra114-host1x
+              - nvidia,tegra124-host1x
+              - nvidia,tegra210-host1x
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt
+            - const: host1x
+      required:
+        - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-host1x
+              - nvidia,tegra194-host1x
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: hypervisor
+            - const: vm
+
+        reg:
+          items:
+            - description: region used by the hypervisor
+            - description: region assigned to the virtual machine
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          maxItems: 1
+
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt
+            - const: host1x
+
+        iommu-map:
+          description: Specification of stream IDs available for memory context device
+            use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+            usable stream IDs.
+
+      required:
+        - reg-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-host1x
+    then:
+      properties:
+        dma-coherent: true
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-host1x
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: common
+            - const: hypervisor
+            - const: vm
+
+        reg:
+          items:
+            - description: region used by host1x server
+            - description: region used by the hypervisor
+            - description: region assigned to the virtual machine
+
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt 0
+            - description: host1x syncpoint interrupt 1
+            - description: host1x syncpoint interrupt 2
+            - description: host1x syncpoint interrupt 3
+            - description: host1x syncpoint interrupt 4
+            - description: host1x syncpoint interrupt 5
+            - description: host1x syncpoint interrupt 6
+            - description: host1x syncpoint interrupt 7
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt0
+            - const: syncpt1
+            - const: syncpt2
+            - const: syncpt3
+            - const: syncpt4
+            - const: syncpt5
+            - const: syncpt6
+            - const: syncpt7
+            - const: host1x
+
+        iommu-map:
+          description: Specification of stream IDs available for memory context device
+            use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+            usable stream IDs.
+
+        dma-coherent: true
+
+      required:
+        - reg-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra20-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <0 65 0x04>, /* mpcore syncpt */
+                     <0 67 0x04>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>;
+        reset-names = "host1x", "mc";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x04000000>;
+
+        mpe@54040000 {
+            compatible = "nvidia,tegra20-mpe";
+            reg = <0x54040000 0x00040000>;
+            interrupts = <0 68 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_MPE>;
+            resets = <&tegra_car 60>;
+            reset-names = "mpe";
+        };
+
+        vi@54080000 {
+            compatible = "nvidia,tegra20-vi";
+            reg = <0x54080000 0x00040000>;
+            interrupts = <0 69 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_VI>;
+            resets = <&tegra_car 100>;
+            reset-names = "vi";
+        };
+
+        epp@540c0000 {
+            compatible = "nvidia,tegra20-epp";
+            reg = <0x540c0000 0x00040000>;
+            interrupts = <0 70 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_EPP>;
+            resets = <&tegra_car 19>;
+            reset-names = "epp";
+        };
+
+        isp@54100000 {
+            compatible = "nvidia,tegra20-isp";
+            reg = <0x54100000 0x00040000>;
+            interrupts = <0 71 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_ISP>;
+            resets = <&tegra_car 23>;
+            reset-names = "isp";
+        };
+
+        gr2d@54140000 {
+            compatible = "nvidia,tegra20-gr2d";
+            reg = <0x54140000 0x00040000>;
+            interrupts = <0 72 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+            resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+            reset-names = "2d", "mc";
+        };
+
+        gr3d@54180000 {
+            compatible = "nvidia,tegra20-gr3d";
+            reg = <0x54180000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+            resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+            reset-names = "3d", "mc";
+        };
+
+        dc@54200000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54200000 0x00040000>;
+            interrupts = <0 73 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+            clock-names = "dc";
+            resets = <&tegra_car 27>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        dc@54240000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54240000 0x00040000>;
+            interrupts = <0 74 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP2>;
+            clock-names = "dc";
+            resets = <&tegra_car 26>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        hdmi@54280000 {
+            compatible = "nvidia,tegra20-hdmi";
+            reg = <0x54280000 0x00040000>;
+            interrupts = <0 75 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "hdmi", "parent";
+            resets = <&tegra_car 51>;
+            reset-names = "hdmi";
+
+            hdmi-supply = <&vdd_5v0_hdmi>;
+            pll-supply = <&vdd_hdmi_pll>;
+            vdd-supply = <&vdd_3v3_hdmi>;
+
+            nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+            nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+        };
+
+        tvo@542c0000 {
+            compatible = "nvidia,tegra20-tvo";
+            reg = <0x542c0000 0x00040000>;
+            interrupts = <0 76 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_TVO>;
+        };
+
+        dsi@54300000 {
+            compatible = "nvidia,tegra20-dsi";
+            reg = <0x54300000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_DSI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "dsi", "parent";
+            resets = <&tegra_car 48>;
+            reset-names = "dsi";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra210-mc.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra210-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* mpcore syncpt */
+                     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>;
+        reset-names = "host1x";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x01000000>;
+        iommus = <&mc TEGRA_SWGROUP_HC>;
+
+        vi@54080000 {
+            compatible = "nvidia,tegra210-vi";
+            reg = <0x54080000 0x00000700>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+            clocks = <&tegra_car TEGRA210_CLK_VI>;
+            power-domains = <&pd_venc>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            ranges = <0x0 0x54080000 0x2000>;
+
+            csi@838 {
+                compatible = "nvidia,tegra210-csi";
+                reg = <0x838 0x1300>;
+                assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                                  <&tegra_car TEGRA210_CLK_CILCD>,
+                                  <&tegra_car TEGRA210_CLK_CILE>,
+                                  <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>;
+                assigned-clock-rates = <102000000>,
+                                       <102000000>,
+                                       <102000000>,
+                                       <972000000>;
+
+                clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                         <&tegra_car TEGRA210_CLK_CILAB>,
+                         <&tegra_car TEGRA210_CLK_CILCD>,
+                         <&tegra_car TEGRA210_CLK_CILE>,
+                         <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+                power-domains = <&pd_sor>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
new file mode 100644
index 000000000000..ee25b5e6f1a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra ISP processor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-isp
+          - nvidia,tegra30-isp
+          - nvidia,tegra114-isp
+          - nvidia,tegra124-isp
+          - nvidia,tegra210-isp
+
+      - items:
+          - const: nvidia,tegra132-isp
+          - const: nvidia,tegra124-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: isp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # write
+
+  power-domains:
+    items:
+      - description: phandle to the VENC or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    isp@54100000 {
+        compatible = "nvidia,tegra20-isp";
+        reg = <0x54100000 0x00040000>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_ISP>;
+        resets = <&tegra_car 23>;
+        reset-names = "isp";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
new file mode 100644
index 000000000000..36b76fa8f525
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-mpe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    oneOf:
+      - pattern: "^mpe@[0-9a-f]+$"
+      - pattern: "^msenc@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-mpe
+          - nvidia,tegra30-mpe
+          - nvidia,tegra114-msenc
+          - nvidia,tegra124-msenc
+
+      - items:
+          - const: nvidia,tegra132-msenc
+          - const: nvidia,tegra124-msenc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: mpe
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 6
+
+  interconnect-names:
+    maxItems: 6
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the MPE power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mpe@54040000 {
+        compatible = "nvidia,tegra20-mpe";
+        reg = <0x54040000 0x00040000>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_MPE>;
+        resets = <&tegra_car 60>;
+        reset-names = "mpe";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
new file mode 100644
index 000000000000..6c84d8b7eb7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-tvo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra TV Encoder Output
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^tvo@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-tvo
+      - nvidia,tegra30-tvo
+      - nvidia,tegra114-tvo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tvo@542c0000 {
+        compatible = "nvidia,tegra20-tvo";
+        reg = <0x542c0000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_TVO>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
new file mode 100644
index 000000000000..644f42b942ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Input controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra20-vi
+      - const: nvidia,tegra30-vi
+      - const: nvidia,tegra114-vi
+      - const: nvidia,tegra124-vi
+      - items:
+          - const: nvidia,tegra132-vi
+          - const: nvidia,tegra124-vi
+      - const: nvidia,tegra210-vi
+      - const: nvidia,tegra186-vi
+      - const: nvidia,tegra194-vi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vi
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    minItems: 4
+    maxItems: 5
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 5
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the VENC power domain
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  vip:
+    $ref: /schemas/display/tegra/nvidia,tegra20-vip.yaml
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input from the VIP (parallel input capture) module
+
+patternProperties:
+  "^csi@[0-9a-f]+$":
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-vi
+              - nvidia,tegra30-vi
+              - nvidia,tegra114-vi
+              - nvidia,tegra124-vi
+    then:
+      required:
+        - resets
+        - reset-names
+    else:
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        camera@48 {
+            compatible = "aptina,mt9v111";
+            reg = <0x48>;
+            clocks = <&camera_clk>;
+
+            port {
+                mt9v111_out: endpoint {
+                    remote-endpoint = <&vi_vip_in>;
+                };
+            };
+        };
+    };
+
+    vi@54080000 {
+        compatible = "nvidia,tegra20-vi";
+        reg = <0x54080000 0x00040000>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_VI>;
+        resets = <&tegra_car 100>;
+        reset-names = "vi";
+
+        vip {
+            compatible = "nvidia,tegra20-vip";
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    vi_vip_in: endpoint {
+                        remote-endpoint = <&mt9v111_out>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    vi_vip_out: endpoint {
+                        remote-endpoint = <&vi_in>;
+                    };
+                };
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                vi_in: endpoint {
+                    remote-endpoint = <&vi_vip_out>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vi@54080000 {
+        compatible = "nvidia,tegra210-vi";
+        reg = <0x54080000 0x00000700>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+        clocks = <&tegra_car TEGRA210_CLK_VI>;
+        power-domains = <&pd_venc>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x0 0x54080000 0x2000>;
+
+        csi@838 {
+            compatible = "nvidia,tegra210-csi";
+            reg = <0x838 0x1300>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                              <&tegra_car TEGRA210_CLK_CILCD>,
+                              <&tegra_car TEGRA210_CLK_CILE>,
+                              <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>;
+            assigned-clock-rates = <102000000>,
+                                   <102000000>,
+                                   <102000000>,
+                                   <972000000>;
+
+            clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                     <&tegra_car TEGRA210_CLK_CILAB>,
+                     <&tegra_car TEGRA210_CLK_CILCD>,
+                     <&tegra_car TEGRA210_CLK_CILE>,
+                     <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+            power-domains = <&pd_sor>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
new file mode 100644
index 000000000000..14294edb8d8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vip.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra VIP (parallel video capture) controller
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-vip
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port receiving the video stream from the sensor
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port sending the video stream to the VI
+
+    required:
+      - port@0
+      - port@1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - ports
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
new file mode 100644
index 000000000000..37f6129c9c92
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra210-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CSI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^csi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-csi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: A/B lanes clock
+      - description: C/D lanes clock
+      - description: E lane clock
+      - description: test pattern generator clock
+
+  clock-names:
+    items:
+      - const: csi
+      - const: cilab
+      - const: cilcd
+      - const: cile
+      - const: csi_tpg
+
+  avdd-dsi-csi-supply:
+    description: DSI/CSI power supply. Must supply 1.2 V.
+
+  power-domains:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml b/Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml
new file mode 100644
index 000000000000..8203ec5e5bb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/ti/ti,am625-oldi.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/ti/ti,am625-oldi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments AM625 OLDI Transmitter
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+  - Aradhya Bhatia <aradhya.bhatia@linux.dev>
+
+description:
+  The AM625 TI Keystone OpenLDI transmitter (OLDI TX) supports serialized RGB
+  pixel data transmission between host and flat panel display over LVDS (Low
+  Voltage Differential Sampling) interface. The OLDI TX consists of 7-to-1 data
+  serializers, and 4-data and 1-clock LVDS outputs. It supports the LVDS output
+  formats "jeida-18", "jeida-24" and "vesa-18", and can accept 24-bit RGB or
+  padded and un-padded 18-bit RGB bus formats as input.
+
+properties:
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: serial clock input for the OLDI transmitters
+
+  clock-names:
+    const: serial
+
+  ti,companion-oldi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to companion OLDI transmitter. This property is required for both
+      the OLDI TXes if they are expected to work either in dual-lvds mode or in
+      clone mode. This property should point to the other OLDI TX's phandle.
+
+  ti,secondary-oldi:
+    type: boolean
+    description:
+      Boolean property to mark the OLDI transmitter as the secondary one, when the
+      OLDI hardware is expected to run as a companion HW, in cases of dual-lvds
+      mode or clone mode. The primary OLDI hardware is responsible for all the
+      hardware configuration.
+
+  ti,oldi-io-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to syscon device node mapping OLDI IO_CTRL registers found in the
+      control MMR region. These registers are required to toggle the I/O lane
+      power, and control its electrical characteristics.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: LVDS output port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - reg
+  - clocks
+  - clock-names
+  - ti,oldi-io-ctrl
+  - ports
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index 781c1868b0b8..361e9cae6896 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments AM65x Display Subsystem
 
@@ -12,14 +12,26 @@ maintainers:
   - Tomi Valkeinen <tomi.valkeinen@ti.com>
 
 description: |
-  The AM65x TI Keystone Display SubSystem with two output ports and
-  two video planes. The first video port supports OLDI and the second
-  supports DPI format. The fist plane is full video plane with all
-  features and the second is a "lite plane" without scaling support.
+  The AM625 and AM65x TI Keystone Display SubSystem has two output
+  ports and two video planes. In AM65x DSS, the first video port
+  supports 1 OLDI TX and in AM625 DSS, the first video port output is
+  internally routed to 2 OLDI TXes. The second video port supports DPI
+  format. The first plane is full video plane with all features and the
+  second is a "lite plane" without scaling support.
+  The AM62L display subsystem has a single output port which supports DPI
+  format but it only supports single video "lite plane" which does not support
+  scaling. The output port is routed to SoC boundary via DPI interface and same
+  DPI signals are also routed internally to DSI Tx controller present within the
+  SoC. Due to clocking limitations only one of the interface i.e. either DSI or
+  DPI can be used at once.
 
 properties:
   compatible:
-    const: ti,am65x-dss
+    enum:
+      - ti,am625-dss
+      - ti,am62a7-dss
+      - ti,am62l-dss
+      - ti,am65x-dss
 
   reg:
     description:
@@ -32,6 +44,7 @@ properties:
       - description: OVR2 overlay manager for vp2
       - description: VP1 video port 1
       - description: VP2 video port 2
+      - description: common1 DSS register area
 
   reg-names:
     items:
@@ -42,6 +55,7 @@ properties:
       - const: ovr2
       - const: vp1
       - const: vp2
+      - const: common1
 
   clocks:
     items:
@@ -80,7 +94,30 @@ properties:
       port@0:
         $ref: /schemas/graph.yaml#/properties/port
         description:
-          The DSS OLDI output port node form video port 1
+          For AM65x DSS, the OLDI output port node from video port 1.
+          For AM625 DSS, the internal DPI output port node from video
+          port 1.
+          For AM62A7 DSS, the port is tied off inside the SoC.
+          For AM62L DSS, the DSS DPI output port node from video port 1
+          or DSI Tx controller node connected to video port 1.
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description:
+              For AM625 DSS, VP Connection to OLDI0.
+              For AM65X DSS, OLDI output from the SoC.
+
+          endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description:
+              For AM625 DSS, VP Connection to OLDI1.
+
+        anyOf:
+          - required:
+              - endpoint
+          - required:
+              - endpoint@0
+              - endpoint@1
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
@@ -88,8 +125,7 @@ properties:
           The DSS DPI output port node from video port 2
 
   ti,am65x-oldi-io-ctrl:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       phandle to syscon device node mapping OLDI IO_CTRL registers.
       The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
@@ -103,6 +139,64 @@ properties:
       Input memory (from main memory to dispc) bandwidth limit in
       bytes per second
 
+  oldi-transmitters:
+    description:
+      Child node under the DSS, to describe all the OLDI transmitters connected
+      to the DSS videoports.
+    type: object
+    additionalProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      '^oldi@[0-1]$':
+        $ref: ti,am625-oldi.yaml#
+        description: OLDI transmitters connected to the DSS VPs
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am62a7-dss
+    then:
+      properties:
+        oldi-transmitters: false
+        ports:
+          properties:
+            port@0: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am62l-dss
+    then:
+      properties:
+        ports:
+          properties:
+            port@1: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,am62l-dss
+              - ti,am65x-dss
+    then:
+      properties:
+        oldi-transmitters: false
+        ports:
+          properties:
+            port@0:
+              properties:
+                endpoint@1: false
+
 required:
   - compatible
   - reg
@@ -121,31 +215,135 @@ examples:
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
 
     dss: dss@4a00000 {
-            compatible = "ti,am65x-dss";
-            reg =   <0x04a00000 0x1000>, /* common */
-                    <0x04a02000 0x1000>, /* vidl1 */
-                    <0x04a06000 0x1000>, /* vid */
-                    <0x04a07000 0x1000>, /* ovr1 */
-                    <0x04a08000 0x1000>, /* ovr2 */
-                    <0x04a0a000 0x1000>, /* vp1 */
-                    <0x04a0b000 0x1000>; /* vp2 */
+        compatible = "ti,am65x-dss";
+        reg = <0x04a00000 0x1000>, /* common */
+              <0x04a02000 0x1000>, /* vidl1 */
+              <0x04a06000 0x1000>, /* vid */
+              <0x04a07000 0x1000>, /* ovr1 */
+              <0x04a08000 0x1000>, /* ovr2 */
+              <0x04a0a000 0x1000>, /* vp1 */
+              <0x04a0b000 0x1000>, /* vp2 */
+              <0x04a01000 0x1000>; /* common1 */
+        reg-names = "common", "vidl1", "vid",
+                "ovr1", "ovr2", "vp1", "vp2", "common1";
+        ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+        power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
+        clocks =        <&k3_clks 67 1>,
+                        <&k3_clks 216 1>,
+                        <&k3_clks 67 2>;
+        clock-names = "fck", "vp1", "vp2";
+        interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                oldi_out0: endpoint {
+                    remote-endpoint = <&lcd_in0>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        dss1: dss@30200000 {
+            compatible = "ti,am625-dss";
+            reg = <0x00 0x30200000 0x00 0x1000>, /* common */
+                  <0x00 0x30202000 0x00 0x1000>, /* vidl1 */
+                  <0x00 0x30206000 0x00 0x1000>, /* vid */
+                  <0x00 0x30207000 0x00 0x1000>, /* ovr1 */
+                  <0x00 0x30208000 0x00 0x1000>, /* ovr2 */
+                  <0x00 0x3020a000 0x00 0x1000>, /* vp1 */
+                  <0x00 0x3020b000 0x00 0x1000>, /* vp2 */
+                  <0x00 0x30201000 0x00 0x1000>; /* common1 */
             reg-names = "common", "vidl1", "vid",
-                    "ovr1", "ovr2", "vp1", "vp2";
-            ti,am65x-oldi-io-ctrl = <&dss_oldi_io_ctrl>;
-            power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
-            clocks =        <&k3_clks 67 1>,
-                            <&k3_clks 216 1>,
-                            <&k3_clks 67 2>;
+                        "ovr1", "ovr2", "vp1", "vp2", "common1";
+            power-domains = <&k3_pds 186 TI_SCI_PD_EXCLUSIVE>;
+            clocks =        <&k3_clks 186 6>,
+                            <&vp1_clock>,
+                            <&k3_clks 186 2>;
             clock-names = "fck", "vp1", "vp2";
-            interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
+            interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+            oldi-transmitters {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                oldi0: oldi@0 {
+                    reg = <0>;
+                    clocks = <&k3_clks 186 0>;
+                    clock-names = "serial";
+                    ti,companion-oldi = <&oldi1>;
+                    ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        port@0 {
+                            reg = <0>;
+                            oldi0_in: endpoint {
+                                remote-endpoint = <&dpi0_out0>;
+                            };
+                        };
+                        port@1 {
+                            reg = <1>;
+                            oldi0_out: endpoint {
+                                remote-endpoint = <&panel_in0>;
+                            };
+                        };
+                    };
+                };
+                oldi1: oldi@1 {
+                    reg = <1>;
+                    clocks = <&k3_clks 186 0>;
+                    clock-names = "serial";
+                    ti,secondary-oldi;
+                    ti,companion-oldi = <&oldi0>;
+                    ti,oldi-io-ctrl = <&dss_oldi_io_ctrl>;
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        port@0 {
+                            reg = <0>;
+                            oldi1_in: endpoint {
+                                remote-endpoint = <&dpi0_out1>;
+                            };
+                        };
+                        port@1 {
+                            reg = <1>;
+                            oldi1_out: endpoint {
+                                remote-endpoint = <&panel_in1>;
+                            };
+                        };
+                    };
+                };
+            };
             ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
                     #address-cells = <1>;
                     #size-cells = <0>;
-                    port@0 {
-                            reg = <0>;
-                            oldi_out0: endpoint {
-                                    remote-endpoint = <&lcd_in0>;
-                            };
+                    reg = <0>;
+                    dpi0_out0: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&oldi0_in>;
+                    };
+                    dpi0_out1: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&oldi1_in>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    dpi1_out: endpoint {
+                        remote-endpoint = <&hdmi_bridge>;
                     };
+                };
             };
+        };
     };
diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
index 2986f9acc9f0..fad7cba58d39 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments J721E Display Subsystem
 
diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
index 7ce7bbad5780..96b1439f88e3 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments K2G Display Subsystem
 
diff --git a/Documentation/devicetree/bindings/display/ti/ti,opa362.txt b/Documentation/devicetree/bindings/display/ti/ti,opa362.txt
deleted file mode 100644
index f96083c0bd17..000000000000
--- a/Documentation/devicetree/bindings/display/ti/ti,opa362.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-OPA362 analog video amplifier
-
-Required properties:
-- compatible: "ti,opa362"
-- enable-gpios: enable/disable output gpio
-
-Required node:
-- Video port 0 for opa362 input
-- Video port 1 for opa362 output
-
-Example:
-
-tv_amp: opa362 {
-	compatible = "ti,opa362";
-	enable-gpios = <&gpio1 23 0>;  /* GPIO to enable video out amplifier */
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			opa_in: endpoint@0 {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			opa_out: endpoint@0 {
-				remote-endpoint = <&tv_connector_in>;
-			};
-		};
-	};
-};
-
-
-
diff --git a/Documentation/devicetree/bindings/display/truly,nt35597.txt b/Documentation/devicetree/bindings/display/truly,nt35597.txt
deleted file mode 100644
index f39c77ee36ea..000000000000
--- a/Documentation/devicetree/bindings/display/truly,nt35597.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Truly model NT35597 DSI display driver
-
-The Truly NT35597 is a generic display driver, currently only configured
-for use in the 2K display on the Qualcomm SDM845 MTP board.
-
-Required properties:
-- compatible: should be "truly,nt35597-2K-display"
-- vdda-supply: phandle of the regulator that provides the supply voltage
-  Power IC supply
-- vdispp-supply: phandle of the regulator that provides the supply voltage
-  for positive LCD bias
-- vdispn-supply: phandle of the regulator that provides the supply voltage
-  for negative LCD bias
-- reset-gpios: phandle of gpio for reset line
-  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
-  (active low)
-- mode-gpios: phandle of the gpio for choosing the mode of the display
-  for single DSI or Dual DSI
-  This should be low for dual DSI and high for single DSI mode
-- ports: This device has two video ports driven by two DSIs. Their connections
-  are modeled using the OF graph bindings specified in
-  Documentation/devicetree/bindings/graph.txt.
-  - port@0: DSI input port driven by master DSI
-  - port@1: DSI input port driven by secondary DSI
-
-Example:
-
-	dsi@ae94000 {
-		panel@0 {
-			compatible = "truly,nt35597-2K-display";
-			reg = <0>;
-			vdda-supply = <&pm8998_l14>;
-			vdispp-supply = <&lab_regulator>;
-			vdispn-supply = <&ibb_regulator>;
-			pinctrl-names = "default", "suspend";
-			pinctrl-0 = <&dpu_dsi_active>;
-			pinctrl-1 = <&dpu_dsi_suspend>;
-
-			reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-			mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					panel0_in: endpoint {
-						remote-endpoint = <&dsi0_out>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					panel1_in: endpoint {
-						remote-endpoint = <&dsi1_out>;
-					};
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
index 10ec78ca1c65..6b754d4f260e 100644
--- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
+++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
@@ -100,12 +100,16 @@ properties:
       - description: Video layer, plane 1 (U/V or U)
       - description: Video layer, plane 2 (V)
       - description: Graphics layer
+      - description: Audio channel 0
+      - description: Audio channel 1
   dma-names:
     items:
       - const: vid0
       - const: vid1
       - const: vid2
       - const: gfx0
+      - const: aud0
+      - const: aud1
 
   phys:
     description: PHYs for the DP data lanes
@@ -117,6 +121,45 @@ properties:
       - const: dp-phy0
       - const: dp-phy1
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Connections to the programmable logic and the DisplayPort PHYs. Each port
+      shall have a single endpoint.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live video input from the programmable logic
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live graphics input from the programmable logic
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live audio input from the programmable logic
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The blended video output to the programmable logic
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The mixed audio output to the programmable logic
+
+      port@5:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The DisplayPort output
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+      - port@5
+
 required:
   - compatible
   - reg
@@ -130,6 +173,7 @@ required:
   - dma-names
   - phys
   - phy-names
+  - ports
 
 additionalProperties: false
 
@@ -154,16 +198,45 @@ examples:
         power-domains = <&pd_dp>;
         resets = <&reset ZYNQMP_RESET_DP>;
 
-        dma-names = "vid0", "vid1", "vid2", "gfx0";
+        dma-names = "vid0", "vid1", "vid2", "gfx0", "aud0", "aud1";
         dmas = <&xlnx_dpdma 0>,
                <&xlnx_dpdma 1>,
                <&xlnx_dpdma 2>,
-               <&xlnx_dpdma 3>;
+               <&xlnx_dpdma 3>,
+               <&xlnx_dpdma 4>,
+               <&xlnx_dpdma 5>;
 
         phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
                <&psgtr 0 PHY_TYPE_DP 1 3>;
 
         phy-names = "dp-phy0", "dp-phy1";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+            };
+            port@1 {
+                reg = <1>;
+            };
+            port@2 {
+                reg = <2>;
+            };
+            port@3 {
+                reg = <3>;
+            };
+            port@4 {
+                reg = <4>;
+            };
+            port@5 {
+                reg = <5>;
+                dpsub_dp_out: endpoint {
+                    remote-endpoint = <&dp_connector>;
+                };
+            };
+        };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
index fc02c5d50ce4..76b804b7c880 100644
--- a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
+++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Bootlin
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Xylon LogiCVC display controller
 
@@ -89,25 +89,25 @@ properties:
     description: Display output colorspace (C_DISPLAY_COLOR_SPACE).
 
   xylon,display-depth:
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Display output depth (C_PIXEL_DATA_WIDTH).
 
   xylon,row-stride:
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
 
   xylon,dithering:
-    $ref: "/schemas/types.yaml#/definitions/flag"
+    $ref: /schemas/types.yaml#/definitions/flag
     description: Dithering module is enabled (C_XCOLOR)
 
   xylon,background-layer:
-    $ref: "/schemas/types.yaml#/definitions/flag"
+    $ref: /schemas/types.yaml#/definitions/flag
     description: |
       The last layer is used to display a black background (C_USE_BACKGROUND).
       The layer must still be registered.
 
   xylon,layers-configurable:
-    $ref: "/schemas/types.yaml#/definitions/flag"
+    $ref: /schemas/types.yaml#/definitions/flag
     description: |
       Configuration of layers' size, position and offset is enabled
       (C_USE_SIZE_POSITION).
@@ -131,7 +131,7 @@ properties:
             maxItems: 1
 
           xylon,layer-depth:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             description: Layer depth (C_LAYER_X_DATA_WIDTH).
 
           xylon,layer-colorspace:
@@ -151,19 +151,19 @@ properties:
             description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE).
 
           xylon,layer-base-offset:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             description: |
               Offset in number of lines (C_LAYER_X_OFFSET) starting from the
               video RAM base (C_VMEM_BASEADDR), only for version 3.
 
           xylon,layer-buffer-offset:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             description: |
               Offset in number of lines (C_BUFFER_*_OFFSET) starting from the
               layer base offset for the second buffer used in double-buffering.
 
           xylon,layer-primary:
-            $ref: "/schemas/types.yaml#/definitions/flag"
+            $ref: /schemas/types.yaml#/definitions/flag
             description: |
               Layer should be registered as a primary plane (exactly one is
               required).
diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
deleted file mode 100644
index cd17684aaab5..000000000000
--- a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Analog Devices AXI-DMAC DMA controller
-
-Required properties:
- - compatible: Must be "adi,axi-dmac-1.00.a".
- - reg: Specification for the controllers memory mapped register map.
- - interrupts: Specification for the controllers interrupt.
- - clocks: Phandle and specifier to the controllers AXI interface clock
- - #dma-cells: Must be 1.
-
-Required sub-nodes:
- - adi,channels: This sub-node must contain a sub-node for each DMA channel. For
-   the channel sub-nodes the following bindings apply. They must match the
-   configuration options of the peripheral as it was instantiated.
-
-Required properties for adi,channels sub-node:
- - #size-cells: Must be 0
- - #address-cells: Must be 1
-
-Required channel sub-node properties:
- - reg: Which channel this node refers to.
- - adi,source-bus-width,
-   adi,destination-bus-width: Width of the source or destination bus in bits.
- - adi,source-bus-type,
-   adi,destination-bus-type: Type of the source or destination bus. Must be one
-   of the following:
-	0 (AXI_DMAC_TYPE_AXI_MM): Memory mapped AXI interface
-	1 (AXI_DMAC_TYPE_AXI_STREAM): Streaming AXI interface
-	2 (AXI_DMAC_TYPE_AXI_FIFO): FIFO interface
-
-Deprecated optional channel properties:
- - adi,length-width: Width of the DMA transfer length register.
- - adi,cyclic: Must be set if the channel supports hardware cyclic DMA
-   transfers.
- - adi,2d: Must be set if the channel supports hardware 2D DMA transfers.
-
-DMA clients connected to the AXI-DMAC DMA controller must use the format
-described in the dma.txt file using a one-cell specifier. The value of the
-specifier refers to the DMA channel index.
-
-Example:
-
-dma: dma@7c420000 {
-	compatible = "adi,axi-dmac-1.00.a";
-	reg = <0x7c420000 0x10000>;
-	interrupts = <0 57 0>;
-	clocks = <&clkc 16>;
-	#dma-cells = <1>;
-
-	adi,channels {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		dma-channel@0 {
-			reg = <0>;
-			adi,source-bus-width = <32>;
-			adi,source-bus-type = <ADI_AXI_DMAC_TYPE_MM_AXI>;
-			adi,destination-bus-width = <64>;
-			adi,destination-bus-type = <ADI_AXI_DMAC_TYPE_FIFO>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml b/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml
new file mode 100644
index 000000000000..63b6fb0423c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/adi,axi-dmac.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/adi,axi-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI-DMAC DMA controller
+
+description: |
+  FPGA-based DMA controller designed for use with high-speed converter hardware.
+
+  http://analogdevicesinc.github.io/hdl/library/axi_dmac/index.html
+
+maintainers:
+  - Nuno Sa <nuno.sa@analog.com>
+
+additionalProperties: false
+
+properties:
+  compatible:
+    const: adi,axi-dmac-1.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 1
+
+  adi,channels:
+    deprecated: true
+    type: object
+    description:
+      This sub-node must contain a sub-node for each DMA channel. This node is
+      only required for IP versions older than 4.3.a and should otherwise be
+      omitted.
+    additionalProperties: false
+
+    properties:
+      "#size-cells":
+        const: 0
+      "#address-cells":
+        const: 1
+
+    patternProperties:
+      "^dma-channel@[0-9a-f]+$":
+        type: object
+        description:
+          DMA channel properties based on HDL compile-time configuration.
+        additionalProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+
+          adi,source-bus-width:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Width of the source bus in bits.
+            enum: [8, 16, 32, 64, 128]
+
+          adi,destination-bus-width:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Width of the destination bus in bits.
+            enum: [8, 16, 32, 64, 128]
+
+          adi,source-bus-type:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: |
+              Type of the source bus.
+
+              0: Memory mapped AXI interface
+              1: Streaming AXI interface
+              2: FIFO interface
+            enum: [0, 1, 2]
+
+          adi,destination-bus-type:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Type of the destination bus (see adi,source-bus-type).
+            enum: [0, 1, 2]
+
+          adi,length-width:
+            deprecated: true
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Width of the DMA transfer length register.
+
+          adi,cyclic:
+            deprecated: true
+            type: boolean
+            description:
+              Must be set if the channel supports hardware cyclic DMA transfers.
+
+          adi,2d:
+            deprecated: true
+            type: boolean
+            description:
+              Must be set if the channel supports hardware 2D DMA transfers.
+
+        required:
+          - reg
+          - adi,source-bus-width
+          - adi,destination-bus-width
+          - adi,source-bus-type
+          - adi,destination-bus-type
+
+    required:
+      - "#size-cells"
+      - "#address-cells"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#dma-cells"
+
+examples:
+  - |
+    dma-controller@7c420000 {
+        compatible = "adi,axi-dmac-1.00.a";
+        reg = <0x7c420000 0x10000>;
+        interrupts = <0 57 0>;
+        clocks = <&clkc 16>;
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
index 83808199657b..9b5180c0a7c4 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun4i-a10-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 DMA Controller Device Tree Bindings
+title: Allwinner A10 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   "#dma-cells":
@@ -22,7 +22,9 @@ properties:
       number.
 
   compatible:
-    const: allwinner,sun4i-a10-dma
+    enum:
+      - allwinner,sun4i-a10-dma
+      - allwinner,suniv-f1c100s-dma
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index b6e1ebfaf366..c3e14eb6cfff 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun50i-a64-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 DMA Controller Device Tree Bindings
+title: Allwinner A64 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   "#dma-cells":
@@ -20,12 +20,20 @@ properties:
 
   compatible:
     oneOf:
-      - const: allwinner,sun50i-a64-dma
-      - const: allwinner,sun50i-a100-dma
-      - const: allwinner,sun50i-h6-dma
+      - enum:
+          - allwinner,sun20i-d1-dma
+          - allwinner,sun50i-a64-dma
+          - allwinner,sun50i-a100-dma
+          - allwinner,sun50i-h6-dma
       - items:
           - const: allwinner,sun8i-r40-dma
           - const: allwinner,sun50i-a64-dma
+      - items:
+          - enum:
+              - allwinner,sun50i-h616-dma
+              - allwinner,sun55i-a523-dma
+              - allwinner,sun55i-a523-mcu-dma
+          - const: allwinner,sun50i-a100-dma
 
   reg:
     maxItems: 1
@@ -57,14 +65,16 @@ required:
 if:
   properties:
     compatible:
-      enum:
-        - allwinner,sun50i-a100-dma
-        - allwinner,sun50i-h6-dma
+      contains:
+        enum:
+          - allwinner,sun20i-d1-dma
+          - allwinner,sun50i-a100-dma
+          - allwinner,sun50i-h6-dma
 
 then:
   properties:
     clocks:
-      maxItems: 2
+      minItems: 2
 
   required:
     - clock-names
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
index a6df6f8b54db..5d554bcfab3d 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun6i-a31-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 DMA Controller Device Tree Bindings
+title: Allwinner A31 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   "#dma-cells":
diff --git a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
index b193ee2db4a7..391bf5838602 100644
--- a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
+++ b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
@@ -7,14 +7,14 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Altera mSGDMA IP core
 
 maintainers:
-  - Olivier Dautricourt <olivier.dautricourt@orolia.com>
+  - Olivier Dautricourt <olivierdautricourt@gmail.com>
 
 description: |
   Altera / Intel modular Scatter-Gather Direct Memory Access (mSGDMA)
   intellectual property (IP)
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/apm,xgene-storm-dma.yaml b/Documentation/devicetree/bindings/dma/apm,xgene-storm-dma.yaml
new file mode 100644
index 000000000000..9ca5f7848785
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/apm,xgene-storm-dma.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/apm,xgene-storm-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene Storm SoC DMA
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+  compatible:
+    const: apm,xgene-storm-dma
+
+  reg:
+    items:
+      - description: DMA control and status registers
+      - description: Descriptor ring control and status registers
+      - description: Descriptor ring command registers
+      - description: SoC efuse registers
+
+  interrupts:
+    items:
+      - description: DMA error reporting interrupt
+      - description: DMA channel 0 completion interrupt
+      - description: DMA channel 1 completion interrupt
+      - description: DMA channel 2 completion interrupt
+      - description: DMA channel 3 completion interrupt
+
+  clocks:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    dma@1f270000 {
+        compatible = "apm,xgene-storm-dma";
+        reg = <0x1f270000 0x10000>,
+              <0x1f200000 0x10000>,
+              <0x1b000000 0x400000>,
+              <0x1054a000 0x100>;
+        interrupts = <0x0 0x82 0x4>,
+                    <0x0 0xb8 0x4>,
+                    <0x0 0xb9 0x4>,
+                    <0x0 0xba 0x4>,
+                    <0x0 0xbb 0x4>;
+        dma-coherent;
+        clocks = <&dmaclk 0>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt
deleted file mode 100644
index c53e0b08032f..000000000000
--- a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Applied Micro X-Gene SoC DMA nodes
-
-DMA nodes are defined to describe on-chip DMA interfaces in
-APM X-Gene SoC.
-
-Required properties for DMA interfaces:
-- compatible: Should be "apm,xgene-dma".
-- device_type: set to "dma".
-- reg: Address and length of the register set for the device.
-  It contains the information of registers in the following order:
-  1st - DMA control and status register address space.
-  2nd - Descriptor ring control and status register address space.
-  3rd - Descriptor ring command register address space.
-  4th - Soc efuse register address space.
-- interrupts: DMA has 5 interrupts sources. 1st interrupt is
-  DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts
-  are completion interrupts for each DMA channels.
-- clocks: Reference to the clock entry.
-
-Optional properties:
-- dma-coherent : Present if dma operations are coherent
-
-Example:
-	dmaclk: dmaclk@1f27c000 {
-		compatible = "apm,xgene-device-clock";
-		#clock-cells = <1>;
-		clocks = <&socplldiv2 0>;
-		reg = <0x0 0x1f27c000 0x0 0x1000>;
-		reg-names = "csr-reg";
-		clock-output-names = "dmaclk";
-	};
-
-	dma: dma@1f270000 {
-			compatible = "apm,xgene-storm-dma";
-			device_type = "dma";
-			reg = <0x0 0x1f270000 0x0 0x10000>,
-			      <0x0 0x1f200000 0x0 0x10000>,
-			      <0x0 0x1b000000 0x0 0x400000>,
-			      <0x0 0x1054a000 0x0 0x100>;
-			interrupts = <0x0 0x82 0x4>,
-				     <0x0 0xb8 0x4>,
-				     <0x0 0xb9 0x4>,
-				     <0x0 0xba 0x4>,
-				     <0x0 0xbb 0x4>;
-			dma-coherent;
-			clocks = <&dmaclk 0>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/apple,admac.yaml b/Documentation/devicetree/bindings/dma/apple,admac.yaml
new file mode 100644
index 000000000000..6a200cbd7d02
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/apple,admac.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/apple,admac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Audio DMA Controller (ADMAC)
+
+description: |
+  Apple's Audio DMA Controller (ADMAC) is used to fetch and store audio samples
+  on SoCs from the "Apple Silicon" family.
+
+  The controller has been seen with up to 24 channels. Even-numbered channels
+  are TX-only, odd-numbered are RX-only. Individual channels are coupled to
+  fixed device endpoints.
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: apple,t6020-admac
+          - const: apple,t8103-admac
+      - items:
+          - enum:
+              # Do not add additional SoC to this list.
+              - apple,t6000-admac
+              - apple,t8103-admac
+              - apple,t8112-admac
+          - const: apple,admac
+
+  reg:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+    description:
+      Clients specify a single cell with channel number.
+
+  dma-channels:
+    maximum: 24
+
+  interrupts:
+    minItems: 4
+    maxItems: 4
+    description:
+      Interrupts that correspond to the 4 IRQ outputs of the controller. Usually
+      only one of the controller outputs will be connected as an usable interrupt
+      source. The remaining interrupts will be left without a valid value, e.g.
+      in an interrupts-extended list the disconnected positions will contain
+      an empty phandle reference <0>.
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#dma-cells'
+  - dma-channels
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    aic: interrupt-controller {
+      interrupt-controller;
+      #interrupt-cells = <3>;
+    };
+
+    admac: dma-controller@238200000 {
+      compatible = "apple,t8103-admac", "apple,admac";
+      reg = <0x38200000 0x34000>;
+      dma-channels = <24>;
+      interrupts-extended = <0>,
+                            <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
+                            <0>,
+                            <0>;
+      #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/arm,dma-350.yaml b/Documentation/devicetree/bindings/dma/arm,dma-350.yaml
new file mode 100644
index 000000000000..429f682f15d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm,dma-350.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm,dma-350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreLink DMA-350 Controller
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    const: arm,dma-350
+
+  reg:
+    items:
+      - description: Base and size of the full register map
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Channel 0 interrupt
+      - description: Channel 1 interrupt
+      - description: Channel 2 interrupt
+      - description: Channel 3 interrupt
+      - description: Channel 4 interrupt
+      - description: Channel 5 interrupt
+      - description: Channel 6 interrupt
+      - description: Channel 7 interrupt
+
+  "#dma-cells":
+    const: 1
+    description: The cell is the trigger input number
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/dma/arm,pl330.yaml b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
new file mode 100644
index 000000000000..4a3dd6f5309b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm,pl330.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCell PL330 DMA Controller
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+  between memory and peripherals or memory to memory.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl330
+  required:
+    - compatible
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl330
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+    description: A single combined interrupt or an interrupt per event
+
+  '#dma-cells':
+    const: 1
+    description: Contains the DMA request number for the consumer
+
+  arm,pl330-broken-no-flushp:
+    type: boolean
+    description: quirk for avoiding to execute DMAFLUSHP
+
+  arm,pl330-periph-burst:
+    type: boolean
+    description: quirk for performing burst transfer only
+
+  dma-coherent: true
+
+  iommus:
+    minItems: 1
+    maxItems: 9
+    description: Up to 1 IOMMU entry per DMA channel for writes and 1
+      IOMMU entry for reads.
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: dma
+      - const: dma-ocp
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@12680000 {
+        compatible = "arm,pl330", "arm,primecell";
+        reg = <0x12680000 0x1000>;
+        interrupts = <99>;
+        #dma-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.yaml b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
index 3bd9eea543ca..ab25ae63d2c3 100644
--- a/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
+++ b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
@@ -10,7 +10,8 @@ maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: /schemas/arm/primecell.yaml#
+  - $ref: dma-controller.yaml#
 
 # We need a select here so we don't match all nodes with 'arm,primecell'
 select:
@@ -89,6 +90,9 @@ properties:
       - 64
     description: bus width used for memcpy in bits. FTDMAC020 also accept 64 bits
 
+  resets:
+    maxItems: 1
+
 required:
   - reg
   - interrupts
diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt
deleted file mode 100644
index 315e90122afa..000000000000
--- a/Documentation/devicetree/bindings/dma/arm-pl330.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* ARM PrimeCell PL330 DMA Controller
-
-The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
-between memory and peripherals or memory to memory.
-
-Required properties:
-  - compatible: should include both "arm,pl330" and "arm,primecell".
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-
-Optional properties:
-  - dma-coherent      : Present if dma operations are coherent
-  - #dma-cells: must be <1>. used to represent the number of integer
-    cells in the dmas property of client device.
-  - dma-channels: contains the total number of DMA channels supported by the DMAC
-  - dma-requests: contains the total number of DMA requests supported by the DMAC
-  - arm,pl330-broken-no-flushp: quirk for avoiding to execute DMAFLUSHP
-  - arm,pl330-periph-burst: quirk for performing burst transfer only
-  - resets: contains an entry for each entry in reset-names.
-	    See ../reset/reset.txt for details.
-  - reset-names: must contain at least "dma", and optional is "dma-ocp".
-
-Example:
-
-	pdma0: pdma@12680000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x12680000 0x1000>;
-		interrupts = <99>;
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-Client drivers (device nodes requiring dma transfers from dev-to-mem or
-mem-to-dev) should specify the DMA channel numbers and dma channel names
-as shown below.
-
-  [property name]  = <[phandle of the dma controller] [dma request id]>;
-  [property name]  = <[dma channel name]>
-
-      where 'dma request id' is the dma request number which is connected
-      to the client controller. The 'property name' 'dmas' and 'dma-names'
-      as required by the generic dma device tree binding helpers. The dma
-      names correspond 1:1 with the dma request ids in the dmas property.
-
-  Example:  dmas = <&pdma0 12
-		    &pdma1 11>;
-	    dma-names = "tx", "rx";
diff --git a/Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml b/Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml
new file mode 100644
index 000000000000..a58dc407311b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel,at91sam9g45-dma.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/atmel,at91sam9g45-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Direct Memory Access Controller (DMA)
+
+maintainers:
+  - Ludovic Desroches <ludovic.desroches@microchip.com>
+
+description:
+  The Atmel Direct Memory Access Controller (DMAC) transfers data from a source
+  peripheral to a destination peripheral over one or more AMBA buses. One channel
+  is required for each source/destination pair. In the most basic configuration,
+  the DMAC has one master interface and one channel. The master interface reads
+  the data from a source and writes it to a destination. Two AMBA transfers are
+  required for each DMAC data transfer. This is also known as a dual-access transfer.
+  The DMAC is programmed via the APB interface.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9g45-dma
+      - atmel,at91sam9rl-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    description:
+      Must be <2>, used to represent the number of integer cells in the dma
+      property of client devices. The two cells in order are
+      1. The first cell represents the channel number.
+      2. The second cell is 0 for RX and 1 for TX transfers.
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dma_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-controller@ffffec00 {
+        compatible = "atmel,at91sam9g45-dma";
+        reg = <0xffffec00 0x200>;
+        interrupts = <21>;
+        #dma-cells = <2>;
+        clocks = <&pmc 2 20>;
+        clock-names = "dma_clk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/atmel,sama5d4-dma.yaml b/Documentation/devicetree/bindings/dma/atmel,sama5d4-dma.yaml
new file mode 100644
index 000000000000..73fc13b902b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel,sama5d4-dma.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/atmel,sama5d4-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 Extensible Direct Memory Access Controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Charan Pedumuru <charan.pedumuru@microchip.com>
+
+description:
+  The DMA Controller (XDMAC) is a AHB-protocol central direct memory access
+  controller. It performs peripheral data transfer and memory move operations
+  over one or two bus ports through the unidirectional communication
+  channel. Each channel is fully programmable and provides both peripheral
+  or memory-to-memory transfers. The channel features are configurable at
+  implementation.
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - atmel,sama5d4-dma
+          - microchip,sama7g5-dma
+      - items:
+          - enum:
+              - microchip,sam9x60-dma
+              - microchip,sam9x7-dma
+          - const: atmel,sama5d4-dma
+      - items:
+          - const: microchip,sama7d65-dma
+          - const: microchip,sama7g5-dma
+
+  "#dma-cells":
+    description: |
+      Represents the number of integer cells in the `dmas` property of client
+      devices. The single cell specifies the channel configuration register:
+        - bit 13: SIF (Source Interface Identifier) for memory interface.
+        - bit 14: DIF (Destination Interface Identifier) for peripheral interface.
+        - bit 30-24: PERID (Peripheral Identifier).
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dma_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - "#dma-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dma-controller@f0008000 {
+        compatible = "atmel,sama5d4-dma";
+        reg = <0xf0008000 0x1000>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+        #dma-cells = <1>;
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+        clock-names = "dma_clk";
+    };
diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
deleted file mode 100644
index f69bcf5a6343..000000000000
--- a/Documentation/devicetree/bindings/dma/atmel-dma.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Atmel Direct Memory Access Controller (DMA)
-
-Required properties:
-- compatible: Should be "atmel,<chip>-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain DMA interrupt.
-- #dma-cells: Must be <2>, used to represent the number of integer cells in
-the dmas property of client devices.
-
-Example:
-
-dma0: dma@ffffec00 {
-	compatible = "atmel,at91sam9g45-dma";
-	reg = <0xffffec00 0x200>;
-	interrupts = <21>;
-	#dma-cells = <2>;
-};
-
-DMA clients connected to the Atmel DMA controller must use the format
-described in the dma.txt file, using a three-cell specifier for each channel:
-a phandle plus two integer cells.
-The three cells in order are:
-
-1. A phandle pointing to the DMA controller.
-2. The memory interface (16 most significant bits), the peripheral interface
-(16 less significant bits).
-3. Parameters for the at91 DMA configuration register which are device
-dependent:
-  - bit 7-0: peripheral identifier for the hardware handshaking interface. The
-  identifier can be different for tx and rx.
-  - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
-
-Example:
-
-i2c0@i2c@f8010000 {
-	compatible = "atmel,at91sam9x5-i2c";
-	reg = <0xf8010000 0x100>;
-	interrupts = <9 4 6>;
-	dmas = <&dma0 1 7>,
-	       <&dma0 1 8>;
-	dma-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
deleted file mode 100644
index 510b7f25ba24..000000000000
--- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Atmel Extensible Direct Memory Access Controller (XDMAC)
-
-* XDMA Controller
-Required properties:
-- compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma" or
-  "microchip,sama7g5-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain DMA interrupt.
-- #dma-cells: Must be <1>, used to represent the number of integer cells in
-the dmas property of client devices.
-  - The 1st cell specifies the channel configuration register:
-    - bit 13: SIF, source interface identifier, used to get the memory
-    interface identifier,
-    - bit 14: DIF, destination interface identifier, used to get the peripheral
-    interface identifier,
-    - bit 30-24: PERID, peripheral identifier.
-
-Example:
-
-dma1: dma-controller@f0004000 {
-	compatible = "atmel,sama5d4-dma";
-	reg = <0xf0004000 0x200>;
-	interrupts = <50 4 0>;
-	#dma-cells = <1>;
-};
-
-
-* DMA clients
-DMA clients connected to the Atmel XDMA controller must use the format
-described in the dma.txt file, using a one-cell specifier for each channel.
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. Channel configuration register. Configurable fields are:
-    - bit 13: SIF, source interface identifier, used to get the memory
-    interface identifier,
-    - bit 14: DIF, destination interface identifier, used to get the peripheral
-    interface identifier,
-  - bit 30-24: PERID, peripheral identifier.
-
-Example:
-
-i2c2: i2c@f8024000 {
-	compatible = "atmel,at91sam9x5-i2c";
-	reg = <0xf8024000 0x4000>;
-	interrupts = <34 4 6>;
-	dmas = <&dma1
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-		 | AT91_XDMAC_DT_PERID(6))>,
-	       <&dma1
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-		| AT91_XDMAC_DT_PERID(7))>;
-	dma-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
deleted file mode 100644
index b6a8cc0978cd..000000000000
--- a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-* BCM2835 DMA controller
-
-The BCM2835 DMA controller has 16 channels in total.
-Only the lower 13 channels have an associated IRQ.
-Some arbitrary channels are used by the firmware
-(1,3,6,7 in the current firmware version).
-The channels 0,2 and 3 have special functionality
-and should not be used by the driver.
-
-Required properties:
-- compatible: Should be "brcm,bcm2835-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain the DMA interrupts associated
-		to the DMA channels in ascending order.
-- interrupt-names: Should contain the names of the interrupt
-		   in the form "dmaXX".
-		   Use "dma-shared-all" for the common interrupt line
-		   that is shared by all dma channels.
-- #dma-cells: Must be <1>, the cell in the dmas property of the
-		client device represents the DREQ number.
-- brcm,dma-channel-mask: Bit mask representing the channels
-			 not used by the firmware in ascending order,
-			 i.e. first channel corresponds to LSB.
-
-Example:
-
-dma: dma@7e007000 {
-	compatible = "brcm,bcm2835-dma";
-	reg = <0x7e007000 0xf00>;
-	interrupts = <1 16>,
-		     <1 17>,
-		     <1 18>,
-		     <1 19>,
-		     <1 20>,
-		     <1 21>,
-		     <1 22>,
-		     <1 23>,
-		     <1 24>,
-		     <1 25>,
-		     <1 26>,
-		     /* dma channel 11-14 share one irq */
-		     <1 27>,
-		     <1 27>,
-		     <1 27>,
-		     <1 27>,
-		     /* unused shared irq for all channels */
-		     <1 28>;
-	interrupt-names = "dma0",
-			  "dma1",
-			  "dma2",
-			  "dma3",
-			  "dma4",
-			  "dma5",
-			  "dma6",
-			  "dma7",
-			  "dma8",
-			  "dma9",
-			  "dma10",
-			  "dma11",
-			  "dma12",
-			  "dma13",
-			  "dma14",
-			  "dma-shared-all";
-
-	#dma-cells = <1>;
-	brcm,dma-channel-mask = <0x7f35>;
-};
-
-
-DMA clients connected to the BCM2835 DMA controller must use the format
-described in the dma.txt file, using a two-cell specifier for each channel.
-
-Example:
-
-bcm2835_i2s: i2s@7e203000 {
-	compatible = "brcm,bcm2835-i2s";
-	reg = <	0x7e203000 0x24>;
-	clocks = <&clocks BCM2835_CLOCK_PCM>;
-
-	dmas = <&dma 2>,
-	       <&dma 3>;
-	dma-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml
new file mode 100644
index 000000000000..c9b9a5490826
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/brcm,bcm2835-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 DMA controller
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenz@kernel.org>
+
+description:
+  The BCM2835 DMA controller has 16 channels in total. Only the lower
+  13 channels have an associated IRQ. Some arbitrary channels are used by the
+  VideoCore firmware (1,3,6,7 in the current firmware version). The channels
+  0, 2 and 3 have special functionality and should not be used by the driver.
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2835-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Should contain the DMA interrupts associated to the DMA channels in
+      ascending order.
+    minItems: 1
+    maxItems: 16
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 16
+
+  '#dma-cells':
+    description: The single cell represents the DREQ number.
+    const: 1
+
+  brcm,dma-channel-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitmask of available DMA channels in ascending order that are
+      not reserved by firmware and are available to the
+      kernel. i.e. first channel corresponds to LSB.
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - brcm,dma-channel-mask
+
+examples:
+  - |
+    dma-controller@7e007000 {
+      compatible = "brcm,bcm2835-dma";
+      reg = <0x7e007000 0xf00>;
+      interrupts = <1 16>,
+                   <1 17>,
+                   <1 18>,
+                   <1 19>,
+                   <1 20>,
+                   <1 21>,
+                   <1 22>,
+                   <1 23>,
+                   <1 24>,
+                   <1 25>,
+                   <1 26>,
+                   /* dma channel 11-14 share one irq */
+                   <1 27>,
+                   <1 27>,
+                   <1 27>,
+                   <1 27>,
+                   /* unused shared irq for all channels */
+                   <1 28>;
+      interrupt-names = "dma0",
+                        "dma1",
+                        "dma2",
+                        "dma3",
+                        "dma4",
+                        "dma5",
+                        "dma6",
+                        "dma7",
+                        "dma8",
+                        "dma9",
+                        "dma10",
+                        "dma11",
+                        "dma12",
+                        "dma13",
+                        "dma14",
+                        "dma-shared-all";
+        #dma-cells = <1>;
+        brcm,dma-channel-mask = <0x7f35>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
deleted file mode 100644
index 092913a28457..000000000000
--- a/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Broadcom SBA RAID engine
-
-Required properties:
-- compatible: Should be one of the following
-	      "brcm,iproc-sba"
-	      "brcm,iproc-sba-v2"
-  The "brcm,iproc-sba" has support for only 6 PQ coefficients
-  The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients
-- mboxes: List of phandle and mailbox channel specifiers
-
-Example:
-
-raid_mbox: mbox@67400000 {
-	...
-	#mbox-cells = <3>;
-	...
-};
-
-raid0 {
-	compatible = "brcm,iproc-sba-v2";
-	mboxes = <&raid_mbox 0 0x1 0xffff>,
-		 <&raid_mbox 1 0x1 0xffff>,
-		 <&raid_mbox 2 0x1 0xffff>,
-		 <&raid_mbox 3 0x1 0xffff>,
-		 <&raid_mbox 4 0x1 0xffff>,
-		 <&raid_mbox 5 0x1 0xffff>,
-		 <&raid_mbox 6 0x1 0xffff>,
-		 <&raid_mbox 7 0x1 0xffff>;
-};
diff --git a/Documentation/devicetree/bindings/dma/brcm,iproc-sba.yaml b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.yaml
new file mode 100644
index 000000000000..f3fed576cacf
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/brcm,iproc-sba.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SBA RAID engine
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,iproc-sba
+      - brcm,iproc-sba-v2
+
+  mboxes:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    raid0 {
+      compatible = "brcm,iproc-sba-v2";
+      mboxes = <&raid_mbox 0 0x1 0xffff>,
+               <&raid_mbox 1 0x1 0xffff>,
+               <&raid_mbox 2 0x1 0xffff>,
+               <&raid_mbox 3 0x1 0xffff>,
+               <&raid_mbox 4 0x1 0xffff>,
+               <&raid_mbox 5 0x1 0xffff>,
+               <&raid_mbox 6 0x1 0xffff>,
+               <&raid_mbox 7 0x1 0xffff>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml
new file mode 100644
index 000000000000..871b76ddf90f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2m.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/cirrus,ep9301-dma-m2m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic ep93xx SoC DMA controller
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9301-dma-m2m
+      - items:
+          - enum:
+              - cirrus,ep9302-dma-m2m
+              - cirrus,ep9307-dma-m2m
+              - cirrus,ep9312-dma-m2m
+              - cirrus,ep9315-dma-m2m
+          - const: cirrus,ep9301-dma-m2m
+
+  reg:
+    items:
+      - description: m2m0 channel registers
+      - description: m2m1 channel registers
+
+  clocks:
+    items:
+      - description: m2m0 channel gate clock
+      - description: m2m1 channel gate clock
+
+  clock-names:
+    items:
+      - const: m2m0
+      - const: m2m1
+
+  interrupts:
+    items:
+      - description: m2m0 channel interrupt
+      - description: m2m1 channel interrupt
+
+  '#dma-cells':
+    const: 2
+    description: |
+      The first cell is the unique device channel number as indicated by this
+      table for ep93xx:
+
+      10: SPI controller
+      11: IDE controller
+
+      The second cell is the DMA direction line number:
+
+      1: Memory to device
+      2: Device to memory
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+    dma-controller@80000100 {
+        compatible = "cirrus,ep9301-dma-m2m";
+        reg = <0x80000100 0x0040>,
+              <0x80000140 0x0040>;
+        clocks = <&syscon EP93XX_CLK_M2M0>,
+                 <&syscon EP93XX_CLK_M2M1>;
+        clock-names = "m2m0", "m2m1";
+        interrupt-parent = <&vic0>;
+        interrupts = <17>, <18>;
+        #dma-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml
new file mode 100644
index 000000000000..d14c31553543
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/cirrus,ep9301-dma-m2p.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/cirrus,ep9301-dma-m2p.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic ep93xx SoC M2P DMA controller
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9301-dma-m2p
+      - items:
+          - enum:
+              - cirrus,ep9302-dma-m2p
+              - cirrus,ep9307-dma-m2p
+              - cirrus,ep9312-dma-m2p
+              - cirrus,ep9315-dma-m2p
+          - const: cirrus,ep9301-dma-m2p
+
+  reg:
+    items:
+      - description: m2p0 channel registers
+      - description: m2p1 channel registers
+      - description: m2p2 channel registers
+      - description: m2p3 channel registers
+      - description: m2p4 channel registers
+      - description: m2p5 channel registers
+      - description: m2p6 channel registers
+      - description: m2p7 channel registers
+      - description: m2p8 channel registers
+      - description: m2p9 channel registers
+
+  clocks:
+    items:
+      - description: m2p0 channel gate clock
+      - description: m2p1 channel gate clock
+      - description: m2p2 channel gate clock
+      - description: m2p3 channel gate clock
+      - description: m2p4 channel gate clock
+      - description: m2p5 channel gate clock
+      - description: m2p6 channel gate clock
+      - description: m2p7 channel gate clock
+      - description: m2p8 channel gate clock
+      - description: m2p9 channel gate clock
+
+  clock-names:
+    items:
+      - const: m2p0
+      - const: m2p1
+      - const: m2p2
+      - const: m2p3
+      - const: m2p4
+      - const: m2p5
+      - const: m2p6
+      - const: m2p7
+      - const: m2p8
+      - const: m2p9
+
+  interrupts:
+    items:
+      - description: m2p0 channel interrupt
+      - description: m2p1 channel interrupt
+      - description: m2p2 channel interrupt
+      - description: m2p3 channel interrupt
+      - description: m2p4 channel interrupt
+      - description: m2p5 channel interrupt
+      - description: m2p6 channel interrupt
+      - description: m2p7 channel interrupt
+      - description: m2p8 channel interrupt
+      - description: m2p9 channel interrupt
+
+  '#dma-cells':
+    const: 2
+    description: |
+      The first cell is the unique device channel number as indicated by this
+      table for ep93xx:
+
+      0: I2S channel 1
+      1: I2S channel 2 (unused)
+      2: AC97 channel 1 (unused)
+      3: AC97 channel 2 (unused)
+      4: AC97 channel 3 (unused)
+      5: I2S channel 3 (unused)
+      6: UART1 (unused)
+      7: UART2 (unused)
+      8: UART3 (unused)
+      9: IRDA (unused)
+
+      The second cell is the DMA direction line number:
+
+      1: Memory to device
+      2: Device to memory
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+    dma-controller@80000000 {
+        compatible = "cirrus,ep9301-dma-m2p";
+        reg = <0x80000000 0x0040>,
+              <0x80000040 0x0040>,
+              <0x80000080 0x0040>,
+              <0x800000c0 0x0040>,
+              <0x80000240 0x0040>,
+              <0x80000200 0x0040>,
+              <0x800002c0 0x0040>,
+              <0x80000280 0x0040>,
+              <0x80000340 0x0040>,
+              <0x80000300 0x0040>;
+        clocks = <&syscon EP93XX_CLK_M2P0>,
+                 <&syscon EP93XX_CLK_M2P1>,
+                 <&syscon EP93XX_CLK_M2P2>,
+                 <&syscon EP93XX_CLK_M2P3>,
+                 <&syscon EP93XX_CLK_M2P4>,
+                 <&syscon EP93XX_CLK_M2P5>,
+                 <&syscon EP93XX_CLK_M2P6>,
+                 <&syscon EP93XX_CLK_M2P7>,
+                 <&syscon EP93XX_CLK_M2P8>,
+                 <&syscon EP93XX_CLK_M2P9>;
+        clock-names = "m2p0", "m2p1",
+                      "m2p2", "m2p3",
+                      "m2p4", "m2p5",
+                      "m2p6", "m2p7",
+                      "m2p8", "m2p9";
+        interrupt-parent = <&vic0>;
+        interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>;
+        #dma-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
index ad06d36af208..fde5160b5d29 100644
--- a/Documentation/devicetree/bindings/dma/dma-common.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/dma-common.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DMA Engine Generic Binding
+title: DMA Engine Common Properties
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
@@ -32,10 +32,9 @@ properties:
       The first item in the array is for channels 0-31, the second is for
       channels 32-63, etc.
     $ref: /schemas/types.yaml#/definitions/uint32-array
-    items:
-      minItems: 1
-      # Should be enough
-      maxItems: 255
+    minItems: 1
+    # Should be enough
+    maxItems: 255
 
   dma-channels:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml
index 0043b91da95e..e6afca558c2d 100644
--- a/Documentation/devicetree/bindings/dma/dma-controller.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/dma/dma-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DMA Controller Generic Binding
+title: DMA Controller Common Properties
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 allOf:
-  - $ref: "dma-common.yaml#"
+  - $ref: dma-common.yaml#
 
 # Everything else is described in the common file
 properties:
@@ -19,19 +19,4 @@ properties:
 
 additionalProperties: true
 
-examples:
-  - |
-    dma: dma-controller@48000000 {
-        compatible = "ti,omap-sdma";
-        reg = <0x48000000 0x1000>;
-        interrupts = <0 12 0x4
-                      0 13 0x4
-                      0 14 0x4
-                      0 15 0x4>;
-        #dma-cells = <1>;
-        dma-channels = <32>;
-        dma-requests = <127>;
-        dma-channel-mask = <0xfffe>;
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml
index e72748496fd9..5ad2febc581e 100644
--- a/Documentation/devicetree/bindings/dma/dma-router.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-router.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/dma/dma-router.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DMA Router Generic Binding
+title: DMA Router Common Properties
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 allOf:
-  - $ref: "dma-common.yaml#"
+  - $ref: dma-common.yaml#
 
 description:
   DMA routers are transparent IP blocks used to route DMA request
@@ -24,6 +24,8 @@ properties:
 
   dma-masters:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Array of phandles to the DMA controllers the router can direct
       the signal to.
@@ -38,15 +40,4 @@ required:
 
 additionalProperties: true
 
-examples:
-  - |
-    sdma_xbar: dma-router@4a002b78 {
-        compatible = "ti,dra7-dma-crossbar";
-        reg = <0x4a002b78 0xfc>;
-        #dma-cells = <1>;
-        dma-requests = <205>;
-        ti,dma-safe-map = <0>;
-        dma-masters = <&sdma>;
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
new file mode 100644
index 000000000000..fa4248e2f1b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -0,0 +1,344 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale enhanced Direct Memory Access(eDMA) Controller
+
+description: |
+  The eDMA channels have multiplex capability by programmable
+  memory-mapped registers. channels are split into two groups, called
+  DMAMUX0 and DMAMUX1, specific DMA request source can only be multiplexed
+  by any channel of certain group, DMAMUX0 or DMAMUX1, but not both.
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-edma
+          - fsl,imx7ulp-edma
+          - fsl,imx8qm-edma
+          - fsl,imx8ulp-edma
+          - fsl,imx93-edma3
+          - fsl,imx93-edma4
+          - fsl,imx95-edma5
+          - nxp,s32g2-edma
+      - items:
+          - enum:
+              - fsl,imx94-edma3
+          - const: fsl,imx93-edma3
+      - items:
+          - enum:
+              - fsl,imx94-edma5
+          - const: fsl,imx95-edma5
+      - items:
+          - const: fsl,ls1028a-edma
+          - const: fsl,vf610-edma
+      - items:
+          - const: nxp,s32g3-edma
+          - const: nxp,s32g2-edma
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    minItems: 1
+    maxItems: 65
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 65
+
+  "#dma-cells":
+    description: |
+      Specifies the number of cells needed to encode an DMA channel.
+
+      Encode for cells number 2:
+        cell 0: index of dma channel mux instance.
+        cell 1: peripheral dma request id.
+
+      Encode for cells number 3:
+        cell 0: peripheral dma request id.
+        cell 1: dma channel priority.
+        cell 2: bitmask, defined at include/dt-bindings/dma/fsl-edma.h
+    enum:
+      - 2
+      - 3
+
+  dma-channels:
+    minimum: 1
+    maximum: 64
+
+  clocks:
+    minItems: 1
+    maxItems: 33
+
+  clock-names:
+    minItems: 1
+    maxItems: 33
+
+  power-domains:
+    description:
+      The number of power domains matches the number of channels, arranged
+      in ascending order according to their associated DMA channels.
+    minItems: 1
+    maxItems: 64
+
+  big-endian:
+    description: |
+      If present registers and hardware scatter/gather descriptors of the
+      eDMA are implemented in big endian mode, otherwise in little mode.
+    type: boolean
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - dma-channels
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-edma
+              - fsl,imx93-edma3
+              - fsl,imx93-edma4
+              - fsl,imx95-edma5
+    then:
+      properties:
+        "#dma-cells":
+          const: 3
+        # It is not necessary to write the interrupt name for each channel.
+        # instead, you can simply maintain the sequential IRQ numbers as
+        # defined for the DMA channels.
+        interrupt-names: false
+        clock-names:
+          items:
+            - const: dma
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,vf610-edma
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: dmamux0
+            - const: dmamux1
+        interrupts:
+          minItems: 2
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: edma-tx
+            - const: edma-err
+        reg:
+          minItems: 2
+          maxItems: 3
+        "#dma-cells":
+          const: 2
+        dma-channels:
+          const: 32
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7ulp-edma
+    then:
+      properties:
+        clock:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: dma
+            - const: dmamux0
+        interrupts:
+          minItems: 2
+          maxItems: 17
+        reg:
+          minItems: 2
+          maxItems: 2
+        "#dma-cells":
+          const: 2
+        dma-channels:
+          const: 32
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8ulp-edma
+    then:
+      properties:
+        clocks:
+          minItems: 33
+        clock-names:
+          minItems: 33
+          items:
+            oneOf:
+              - const: dma
+              - pattern: "^ch(0[0-9]|[1-2][0-9]|3[01])$"
+
+        interrupt-names: false
+        interrupts:
+          minItems: 32
+        "#dma-cells":
+          const: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,vf610-edma
+              - fsl,imx7ulp-edma
+              - fsl,imx93-edma3
+              - fsl,imx93-edma4
+              - fsl,imx95-edma5
+              - fsl,imx8ulp-edma
+              - fsl,ls1028a-edma
+    then:
+      required:
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-adma
+              - fsl,imx8qm-edma
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nxp,s32g2-edma
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: dmamux0
+            - const: dmamux1
+        interrupts:
+          minItems: 3
+          maxItems: 3
+        interrupt-names:
+          items:
+            - const: tx-0-15
+            - const: tx-16-31
+            - const: err
+        reg:
+          minItems: 3
+          maxItems: 3
+        "#dma-cells":
+          const: 2
+        dma-channels:
+          const: 32
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    edma0: dma-controller@40018000 {
+      #dma-cells = <2>;
+      compatible = "fsl,vf610-edma";
+      reg = <0x40018000 0x2000>,
+            <0x40024000 0x1000>,
+            <0x40025000 0x1000>;
+      interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+                   <0 9 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "edma-tx", "edma-err";
+      dma-channels = <32>;
+      clock-names = "dmamux0", "dmamux1";
+      clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+
+    edma1: dma-controller@40080000 {
+      #dma-cells = <2>;
+      compatible = "fsl,imx7ulp-edma";
+      reg = <0x40080000 0x2000>,
+            <0x40210000 0x1000>;
+      dma-channels = <32>;
+      interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+                   /* last is eDMA2-ERR interrupt */
+                   <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+       clock-names = "dma", "dmamux0";
+       clocks = <&pcc2 IMX7ULP_CLK_DMA1>, <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    dma-controller@5a9f0000 {
+      compatible = "fsl,imx8qm-edma";
+      reg = <0x5a9f0000 0x90000>;
+      #dma-cells = <3>;
+      dma-channels = <8>;
+      interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>;
+      power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+                      <&pd IMX_SC_R_DMA_3_CH1>,
+                      <&pd IMX_SC_R_DMA_3_CH2>,
+                      <&pd IMX_SC_R_DMA_3_CH3>,
+                      <&pd IMX_SC_R_DMA_3_CH4>,
+                      <&pd IMX_SC_R_DMA_3_CH5>,
+                      <&pd IMX_SC_R_DMA_3_CH6>,
+                      <&pd IMX_SC_R_DMA_3_CH7>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml
new file mode 100644
index 000000000000..92288d76d51b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,elo-dma.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,elo-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Elo DMA Controller
+
+maintainers:
+  - J. Neuschäfer <j.ne@posteo.net>
+
+description:
+  This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx
+  series chips such as mpc8315, mpc8349, mpc8379 etc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,mpc8313-dma
+          - fsl,mpc8315-dma
+          - fsl,mpc8323-dma
+          - fsl,mpc8347-dma
+          - fsl,mpc8349-dma
+          - fsl,mpc8360-dma
+          - fsl,mpc8377-dma
+          - fsl,mpc8378-dma
+          - fsl,mpc8379-dma
+      - const: fsl,elo-dma
+
+  reg:
+    items:
+      - description:
+          DMA General Status Register, i.e. DGSR which contains status for
+          all the 4 DMA channels.
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Controller index. 0 for controller @ 0x8100.
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+    description: Controller interrupt.
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^dma-channel@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          # native DMA channel
+          - items:
+              - enum:
+                  - fsl,mpc8315-dma-channel
+                  - fsl,mpc8323-dma-channel
+                  - fsl,mpc8347-dma-channel
+                  - fsl,mpc8349-dma-channel
+                  - fsl,mpc8360-dma-channel
+                  - fsl,mpc8377-dma-channel
+                  - fsl,mpc8378-dma-channel
+                  - fsl,mpc8379-dma-channel
+              - const: fsl,elo-dma-channel
+
+          # audio DMA channel, see fsl,ssi.yaml
+          - const: fsl,ssi-dma-channel
+
+      reg:
+        maxItems: 1
+
+      cell-index:
+        description: DMA channel index starts at 0.
+
+      interrupts:
+        maxItems: 1
+        description:
+          Per-channel interrupt. Only necessary if no controller interrupt has
+          been provided.
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    dma@82a8 {
+        compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+        reg = <0x82a8 4>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x8100 0x1a4>;
+        interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+        cell-index = <0>;
+
+        dma-channel@0 {
+            compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+            reg = <0 0x80>;
+            cell-index = <0>;
+            interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+        };
+
+        dma-channel@80 {
+            compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+            reg = <0x80 0x80>;
+            cell-index = <1>;
+            interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+        };
+
+        dma-channel@100 {
+            compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+            reg = <0x100 0x80>;
+            cell-index = <2>;
+            interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+        };
+
+        dma-channel@180 {
+            compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+            reg = <0x180 0x80>;
+            cell-index = <3>;
+            interrupts = <71 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl,elo3-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,elo3-dma.yaml
new file mode 100644
index 000000000000..0f5e475657a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,elo3-dma.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,elo3-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Elo3 DMA Controller
+
+maintainers:
+  - J. Neuschäfer <j.ne@posteo.net>
+
+description:
+  DMA controller which has same function as EloPlus except that Elo3 has 8
+  channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx
+  series chips, such as t1040, t4240, b4860.
+
+properties:
+  compatible:
+    const: fsl,elo3-dma
+
+  reg:
+    items:
+      - description:
+          DMA General Status Registers starting from DGSR0, for channel 1~4
+      - description:
+          DMA General Status Registers starting from DGSR1, for channel 5~8
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+patternProperties:
+  "^dma-channel@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          # native DMA channel
+          - fsl,eloplus-dma-channel
+
+          # audio DMA channel, see fsl,ssi.yaml
+          - fsl,ssi-dma-channel
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+        description:
+          Per-channel interrupt. Only necessary if no controller interrupt has
+          been provided.
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    dma@100300 {
+        compatible = "fsl,elo3-dma";
+        reg = <0x100300 0x4>,
+              <0x100600 0x4>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x100100 0x500>;
+
+        dma-channel@0 {
+            compatible = "fsl,eloplus-dma-channel";
+            reg = <0x0 0x80>;
+            interrupts = <28 IRQ_TYPE_EDGE_FALLING 0 0>;
+        };
+
+        dma-channel@80 {
+            compatible = "fsl,eloplus-dma-channel";
+            reg = <0x80 0x80>;
+            interrupts = <29 IRQ_TYPE_EDGE_FALLING 0 0>;
+        };
+
+        dma-channel@100 {
+            compatible = "fsl,eloplus-dma-channel";
+            reg = <0x100 0x80>;
+            interrupts = <30 IRQ_TYPE_EDGE_FALLING 0 0>;
+        };
+
+        dma-channel@180 {
+            compatible = "fsl,eloplus-dma-channel";
+            reg = <0x180 0x80>;
+            interrupts = <31 IRQ_TYPE_EDGE_FALLING 0 0>;
+        };
+
+        dma-channel@300 {
+            compatible = "fsl,eloplus-dma-channel";
+            reg = <0x300 0x80>;
+            interrupts = <76 IRQ_TYPE_EDGE_FALLING 0 0>;
+        };
+
+        dma-channel@380 {
+            compatible = "fsl,eloplus-dma-channel";
+            reg = <0x380 0x80>;
+            interrupts = <77 IRQ_TYPE_EDGE_FALLING 0 0>;
+        };
+
+        dma-channel@400 {
+            compatible = "fsl,eloplus-dma-channel";
+            reg = <0x400 0x80>;
+            interrupts = <78 IRQ_TYPE_EDGE_FALLING 0 0>;
+        };
+
+        dma-channel@480 {
+            compatible = "fsl,eloplus-dma-channel";
+            reg = <0x480 0x80>;
+            interrupts = <79 IRQ_TYPE_EDGE_FALLING 0 0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl,eloplus-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,eloplus-dma.yaml
new file mode 100644
index 000000000000..8992f244c4db
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,eloplus-dma.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,eloplus-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale EloPlus DMA Controller
+
+maintainers:
+  - J. Neuschäfer <j.ne@posteo.net>
+
+description:
+  This is a 4-channel DMA controller with extended addresses and chaining,
+  mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as
+  mpc8540, mpc8641 p4080, bsc9131 etc.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,mpc8540-dma
+              - fsl,mpc8541-dma
+              - fsl,mpc8548-dma
+              - fsl,mpc8555-dma
+              - fsl,mpc8560-dma
+              - fsl,mpc8572-dma
+              - fsl,mpc8641-dma
+          - const: fsl,eloplus-dma
+      - const: fsl,eloplus-dma
+
+  reg:
+    items:
+      - description:
+          DMA General Status Register, i.e. DGSR which contains
+          status for all the 4 DMA channels
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      controller index.  0 for controller @ 0x21000, 1 for controller @ 0xc000
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+    description: Controller interrupt.
+
+patternProperties:
+  "^dma-channel@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          # native DMA channel
+          - items:
+              - enum:
+                  - fsl,mpc8540-dma-channel
+                  - fsl,mpc8541-dma-channel
+                  - fsl,mpc8548-dma-channel
+                  - fsl,mpc8555-dma-channel
+                  - fsl,mpc8560-dma-channel
+                  - fsl,mpc8572-dma-channel
+              - const: fsl,eloplus-dma-channel
+
+          # audio DMA channel, see fsl,ssi.yaml
+          - const: fsl,ssi-dma-channel
+
+      reg:
+        maxItems: 1
+
+      cell-index:
+        description: DMA channel index starts at 0.
+
+      interrupts:
+        maxItems: 1
+        description:
+          Per-channel interrupt. Only necessary if no controller interrupt has
+          been provided.
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    dma@21300 {
+        compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+        reg = <0x21300 4>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x21100 0x200>;
+        cell-index = <0>;
+
+        dma-channel@0 {
+            compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+            reg = <0 0x80>;
+            cell-index = <0>;
+            interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+        };
+
+        dma-channel@80 {
+            compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+            reg = <0x80 0x80>;
+            cell-index = <1>;
+            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+        };
+
+        dma-channel@100 {
+            compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+            reg = <0x100 0x80>;
+            cell-index = <2>;
+            interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+        };
+
+        dma-channel@180 {
+            compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
+            reg = <0x180 0x80>;
+            cell-index = <3>;
+            interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl,imx-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,imx-dma.yaml
new file mode 100644
index 000000000000..75957f9fb58b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,imx-dma.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,imx-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Direct Memory Access (DMA) Controller for i.MX
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx1-dma
+      - fsl,imx21-dma
+      - fsl,imx27-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: DMA complete interrupt
+      - description: DMA Error interrupt
+    minItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
+
+  "#dma-cells":
+    const: 1
+
+  dma-channels:
+    const: 16
+
+  dma-requests:
+    description: Number of DMA requests supported.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    dma-controller@10001000 {
+      compatible = "fsl,imx27-dma";
+      reg = <0x10001000 0x1000>;
+      interrupts = <32 33>;
+      #dma-cells = <1>;
+      dma-channels = <16>;
+      clocks = <&clks IMX27_CLK_DMA_IPG_GATE>, <&clks IMX27_CLK_DMA_AHB_GATE>;
+      clock-names = "ipg", "ahb";
+    };
diff --git a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
new file mode 100644
index 000000000000..738b25b88b37
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,imx-sdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
+
+maintainers:
+  - Joy Zou <joy.zou@nxp.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx50-sdma
+              - fsl,imx51-sdma
+              - fsl,imx53-sdma
+              - fsl,imx6q-sdma
+              - fsl,imx7d-sdma
+          - const: fsl,imx35-sdma
+      - items:
+          - enum:
+              - fsl,imx6sx-sdma
+              - fsl,imx6sl-sdma
+          - const: fsl,imx6q-sdma
+      - items:
+          - const: fsl,imx6ul-sdma
+          - const: fsl,imx6q-sdma
+          - const: fsl,imx35-sdma
+      - items:
+          - const: fsl,imx6sll-sdma
+          - const: fsl,imx6ul-sdma
+      - items:
+          - const: fsl,imx8mq-sdma
+          - const: fsl,imx7d-sdma
+      - items:
+          - enum:
+              - fsl,imx8mp-sdma
+              - fsl,imx8mn-sdma
+              - fsl,imx8mm-sdma
+          - const: fsl,imx8mq-sdma
+      - items:
+          - enum:
+              - fsl,imx25-sdma
+              - fsl,imx31-sdma
+              - fsl,imx35-sdma
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,sdma-ram-script-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Should contain the full path of SDMA RAM scripts firmware.
+
+  "#dma-cells":
+    const: 3
+    description: |
+      The first cell: request/event ID
+
+      The second cell: peripheral types ID
+        enum:
+          - MCU domain SSI: 0
+          - Shared SSI: 1
+          - MMC: 2
+          - SDHC: 3
+          - MCU domain UART: 4
+          - Shared UART: 5
+          - FIRI: 6
+          - MCU domain CSPI: 7
+          - Shared CSPI: 8
+          - SIM: 9
+          - ATA: 10
+          - CCM: 11
+          - External peripheral: 12
+          - Memory Stick Host Controller: 13
+          - Shared Memory Stick Host Controller: 14
+          - DSP: 15
+          - Memory: 16
+          - FIFO type Memory: 17
+          - SPDIF: 18
+          - IPU Memory: 19
+          - ASRC: 20
+          - ESAI: 21
+          - SSI Dual FIFO: 22
+              description: needs firmware more than ver 2
+          - Shared ASRC: 23
+          - SAI: 24
+          - Multi SAI: 25
+          - HDMI Audio: 26
+          - I2C: 27
+
+       The third cell: transfer priority ID
+         enum:
+           - High: 0
+           - Medium: 1
+           - Low: 2
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the General Purpose Register (GPR) node
+
+  fsl,sdma-event-remap:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    maxItems: 2
+    items:
+      items:
+        - description: GPR register offset
+        - description: GPR register shift
+        - description: GPR register value
+    description: |
+      Register bits of sdma event remap, the format is <reg shift val>.
+      The order is <RX>, <TX>.
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
+
+  iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the On-chip RAM (OCRAM) node.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - fsl,sdma-ram-script-name
+
+additionalProperties: false
+
+examples:
+  - |
+    sdma: dma-controller@83fb0000 {
+      compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+      reg = <0x83fb0000 0x4000>;
+      interrupts = <6>;
+      #dma-cells = <3>;
+      fsl,sdma-ram-script-name = "sdma-imx51.bin";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl,mxs-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,mxs-dma.yaml
new file mode 100644
index 000000000000..9102b615dbd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,mxs-dma.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Direct Memory Access (DMA) Controller from i.MX23/i.MX28
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-dma-apbh
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx23-dma-apbx
+    then:
+      properties:
+        interrupt-names:
+          items:
+            - const: audio-adc
+            - const: audio-dac
+            - const: spdif-tx
+            - const: i2c
+            - const: saif0
+            - const: empty0
+            - const: auart0-rx
+            - const: auart0-tx
+            - const: auart1-rx
+            - const: auart1-tx
+            - const: saif1
+            - const: empty1
+            - const: empty2
+            - const: empty3
+            - const: empty4
+            - const: empty5
+    else:
+      properties:
+        interrupt-names: false
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6q-dma-apbh
+              - fsl,imx6sx-dma-apbh
+              - fsl,imx7d-dma-apbh
+              - fsl,imx8dxl-dma-apbh
+              - fsl,imx8mm-dma-apbh
+              - fsl,imx8mn-dma-apbh
+              - fsl,imx8mp-dma-apbh
+              - fsl,imx8mq-dma-apbh
+              - fsl,imx8qm-dma-apbh
+              - fsl,imx8qxp-dma-apbh
+          - const: fsl,imx28-dma-apbh
+      - enum:
+          - fsl,imx23-dma-apbh
+          - fsl,imx23-dma-apbx
+          - fsl,imx28-dma-apbh
+          - fsl,imx28-dma-apbx
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    minItems: 4
+    maxItems: 16
+
+  interrupt-names:
+    minItems: 4
+    maxItems: 16
+
+  "#dma-cells":
+    const: 1
+
+  dma-channels:
+    enum: [4, 8, 16]
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#dma-cells"
+  - dma-channels
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-parent = <&irqc>;
+
+    dma-controller@80004000 {
+      compatible = "fsl,imx28-dma-apbh";
+      reg = <0x80004000 0x2000>;
+      interrupts = <82 83 84 85
+                    88 88 88 88
+                    88 88 88 88
+                    87 86 0 0>;
+      #dma-cells = <1>;
+      dma-channels = <16>;
+    };
+
+    dma-controller@80024000 {
+      compatible = "fsl,imx28-dma-apbx";
+      reg = <0x80024000 0x2000>;
+      interrupts = <78 79 66 0
+                    80 81 68 69
+                    70 71 72 73
+                    74 75 76 77>;
+      #dma-cells = <1>;
+      dma-channels = <16>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt
deleted file mode 100644
index ee1754739b4b..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-edma.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-* Freescale enhanced Direct Memory Access(eDMA) Controller
-
-  The eDMA channels have multiplex capability by programmble memory-mapped
-registers. channels are split into two groups, called DMAMUX0 and DMAMUX1,
-specific DMA request source can only be multiplexed by any channel of certain
-group, DMAMUX0 or DMAMUX1, but not both.
-
-* eDMA Controller
-Required properties:
-- compatible :
-	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
-	- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
-	- "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the
-	  LS1028A SoC.
-- reg : Specifies base physical address(s) and size of the eDMA registers.
-	The 1st region is eDMA control register's address and size.
-	The 2nd and the 3rd regions are programmable channel multiplexing
-	control register's address and size.
-- interrupts : A list of interrupt-specifiers, one for each entry in
-	interrupt-names on vf610 similar SoC. But for i.mx7ulp per channel
-	per transmission interrupt, total 16 channel interrupt and 1
-	error interrupt(located in the last), no interrupt-names list on
-	i.mx7ulp for clean on dts.
-- #dma-cells : Must be <2>.
-	The 1st cell specifies the DMAMUX(0 for DMAMUX0 and 1 for DMAMUX1).
-	Specific request source can only be multiplexed by specific channels
-	group called DMAMUX.
-	The 2nd cell specifies the request source(slot) ID.
-	See the SoC's reference manual for all the supported request sources.
-- dma-channels : Number of channels supported by the controller
-- clock-names : A list of channel group clock names. Should contain:
-	"dmamux0" - clock name of mux0 group
-	"dmamux1" - clock name of mux1 group
-	Note: No dmamux0 on i.mx7ulp, but another 'dma' clk added on i.mx7ulp.
-- clocks : A list of phandle and clock-specifier pairs, one for each entry in
-	clock-names.
-
-Optional properties:
-- big-endian: If present registers and hardware scatter/gather descriptors
-	of the eDMA are implemented in big endian mode, otherwise in little
-	mode.
-- interrupt-names : Should contain the below on vf610 similar SoC but not used
-	on i.mx7ulp similar SoC:
-	"edma-tx" - the transmission interrupt
-	"edma-err" - the error interrupt
-
-
-Examples:
-
-edma0: dma-controller@40018000 {
-	#dma-cells = <2>;
-	compatible = "fsl,vf610-edma";
-	reg = <0x40018000 0x2000>,
-		<0x40024000 0x1000>,
-		<0x40025000 0x1000>;
-	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
-		<0 9 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "edma-tx", "edma-err";
-	dma-channels = <32>;
-	clock-names = "dmamux0", "dmamux1";
-	clocks = <&clks VF610_CLK_DMAMUX0>,
-		<&clks VF610_CLK_DMAMUX1>;
-}; /* vf610 */
-
-edma1: dma-controller@40080000 {
-	#dma-cells = <2>;
-	compatible = "fsl,imx7ulp-edma";
-	reg = <0x40080000 0x2000>,
-		<0x40210000 0x1000>;
-	dma-channels = <32>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-		     /* last is eDMA2-ERR interrupt */
-		     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "dma", "dmamux0";
-	clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
-		 <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
-}; /* i.mx7ulp */
-
-* DMA clients
-DMA client drivers that uses the DMA function must use the format described
-in the dma.txt file, using a two-cell specifier for each channel: the 1st
-specifies the channel group(DMAMUX) in which this request can be multiplexed,
-and the 2nd specifies the request source.
-
-Examples:
-
-sai2: sai@40031000 {
-	compatible = "fsl,vf610-sai";
-	reg = <0x40031000 0x1000>;
-	interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "sai";
-	clocks = <&clks VF610_CLK_SAI2>;
-	dma-names = "tx", "rx";
-	dmas = <&edma0 0 21>,
-		<&edma0 0 20>;
-};
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
deleted file mode 100644
index 7bd8847d6394..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Freescale Direct Memory Access (DMA) Controller for i.MX
-
-This document will only describe differences to the generic DMA Controller and
-DMA request bindings as described in dma/dma.txt .
-
-* DMA controller
-
-Required properties:
-- compatible : Should be "fsl,<chip>-dma". chip can be imx1, imx21 or imx27
-- reg : Should contain DMA registers location and length
-- interrupts : First item should be DMA interrupt, second one is optional and
-    should contain DMA Error interrupt
-- #dma-cells : Has to be 1. imx-dma does not support anything else.
-
-Optional properties:
-- #dma-channels : Number of DMA channels supported. Should be 16.
-- #dma-requests : Number of DMA requests supported.
-
-Example:
-
-	dma: dma@10001000 {
-		compatible = "fsl,imx27-dma";
-		reg = <0x10001000 0x1000>;
-		interrupts = <32 33>;
-		#dma-cells = <1>;
-		#dma-channels = <16>;
-	};
-
-
-* DMA client
-
-Clients have to specify the DMA requests with phandles in a list.
-
-Required properties:
-- dmas: List of one or more DMA request specifiers. One DMA request specifier
-    consists of a phandle to the DMA controller followed by the integer
-    specifying the request line.
-- dma-names: List of string identifiers for the DMA requests. For the correct
-    names, have a look at the specific client driver.
-
-Example:
-
-	sdhci1: sdhci@10013000 {
-		...
-		dmas = <&dma 7>;
-		dma-names = "rx-tx";
-		...
-	};
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
deleted file mode 100644
index 12c316ff4834..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ /dev/null
@@ -1,118 +0,0 @@
-* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
-
-Required properties:
-- compatible : Should be one of
-      "fsl,imx25-sdma"
-      "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma"
-      "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma"
-      "fsl,imx51-sdma"
-      "fsl,imx53-sdma"
-      "fsl,imx6q-sdma"
-      "fsl,imx7d-sdma"
-      "fsl,imx6ul-sdma"
-      "fsl,imx8mq-sdma"
-      "fsl,imx8mm-sdma"
-      "fsl,imx8mn-sdma"
-      "fsl,imx8mp-sdma"
-  The -to variants should be preferred since they allow to determine the
-  correct ROM script addresses needed for the driver to work without additional
-  firmware.
-- reg : Should contain SDMA registers location and length
-- interrupts : Should contain SDMA interrupt
-- #dma-cells : Must be <3>.
-  The first cell specifies the DMA request/event ID.  See details below
-  about the second and third cell.
-- fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM
-  scripts firmware
-
-The second cell of dma phandle specifies the peripheral type of DMA transfer.
-The full ID of peripheral types can be found below.
-
-	ID	transfer type
-	---------------------
-	0	MCU domain SSI
-	1	Shared SSI
-	2	MMC
-	3	SDHC
-	4	MCU domain UART
-	5	Shared UART
-	6	FIRI
-	7	MCU domain CSPI
-	8	Shared CSPI
-	9	SIM
-	10	ATA
-	11	CCM
-	12	External peripheral
-	13	Memory Stick Host Controller
-	14	Shared Memory Stick Host Controller
-	15	DSP
-	16	Memory
-	17	FIFO type Memory
-	18	SPDIF
-	19	IPU Memory
-	20	ASRC
-	21	ESAI
-	22	SSI Dual FIFO	(needs firmware ver >= 2)
-	23	Shared ASRC
-	24	SAI
-
-The third cell specifies the transfer priority as below.
-
-	ID	transfer priority
-	-------------------------
-	0	High
-	1	Medium
-	2	Low
-
-Optional properties:
-
-- gpr : The phandle to the General Purpose Register (GPR) node.
-- fsl,sdma-event-remap : Register bits of sdma event remap, the format is
-  <reg shift val>.
-    reg is the GPR register offset.
-    shift is the bit position inside the GPR register.
-    val is the value of the bit (0 or 1).
-
-Examples:
-
-sdma@83fb0000 {
-	compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
-	reg = <0x83fb0000 0x4000>;
-	interrupts = <6>;
-	#dma-cells = <3>;
-	fsl,sdma-ram-script-name = "sdma-imx51.bin";
-};
-
-DMA clients connected to the i.MX SDMA controller must use the format
-described in the dma.txt file.
-
-Examples:
-
-ssi2: ssi@70014000 {
-	compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
-	reg = <0x70014000 0x4000>;
-	interrupts = <30>;
-	clocks = <&clks 49>;
-	dmas = <&sdma 24 1 0>,
-	       <&sdma 25 1 0>;
-	dma-names = "rx", "tx";
-	fsl,fifo-depth = <15>;
-};
-
-Using the fsl,sdma-event-remap property:
-
-If we want to use SDMA on the SAI1 port on a MX6SX:
-
-&sdma {
-	gpr = <&gpr>;
-	/* SDMA events remap for SAI1_RX and SAI1_TX */
-	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
-};
-
-The fsl,sdma-event-remap property in this case has two values:
-- <0 15 1> means that the offset is 0, so GPR0 is the register of the
-SDMA remap. Bit 15 of GPR0 selects between UART4_RX and SAI1_RX.
-Setting bit 15 to 1 selects SAI1_RX.
-- <0 16 1> means that the offset is 0, so GPR0 is the register of the
-SDMA remap. Bit 16 of GPR0 selects between UART4_TX and SAI1_TX.
-Setting bit 16 to 1 selects SAI1_TX.
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
deleted file mode 100644
index e30e184f50c7..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Freescale MXS DMA
-
-Required properties:
-- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
-- reg : Should contain registers location and length
-- interrupts : Should contain the interrupt numbers of DMA channels.
-  If a channel is empty/reserved, 0 should be filled in place.
-- #dma-cells : Must be <1>.  The number cell specifies the channel ID.
-- dma-channels : Number of channels supported by the DMA controller
-
-Optional properties:
-- interrupt-names : Name of DMA channel interrupts
-
-Supported chips:
-imx23, imx28.
-
-Examples:
-
-dma_apbh: dma-apbh@80004000 {
-	compatible = "fsl,imx28-dma-apbh";
-	reg = <0x80004000 0x2000>;
-	interrupts = <82 83 84 85
-		      88 88 88 88
-		      88 88 88 88
-		      87 86 0 0>;
-	interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
-			  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
-			  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
-			  "hsadc", "lcdif", "empty", "empty";
-	#dma-cells = <1>;
-	dma-channels = <16>;
-};
-
-dma_apbx: dma-apbx@80024000 {
-	compatible = "fsl,imx28-dma-apbx";
-	reg = <0x80024000 0x2000>;
-	interrupts = <78 79 66 0
-		      80 81 68 69
-		      70 71 72 73
-		      74 75 76 77>;
-	interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
-			  "saif0", "saif1", "i2c0", "i2c1",
-			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
-			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
-	#dma-cells = <1>;
-	dma-channels = <16>;
-};
-
-DMA clients connected to the MXS DMA controller must use the format
-described in the dma.txt file.
-
-Examples:
-
-auart0: serial@8006a000 {
-	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-	reg = <0x8006a000 0x2000>;
-	interrupts = <112>;
-	dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-	dma-names = "rx", "tx";
-};
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
deleted file mode 100644
index da371c4d406c..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-qdma.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-NXP Layerscape SoC qDMA Controller
-==================================
-
-This device follows the generic DMA bindings defined in dma/dma.txt.
-
-Required properties:
-
-- compatible:		Must be one of
-			 "fsl,ls1021a-qdma": for LS1021A Board
-			 "fsl,ls1028a-qdma": for LS1028A Board
-			 "fsl,ls1043a-qdma": for ls1043A Board
-			 "fsl,ls1046a-qdma": for ls1046A Board
-- reg:			Should contain the register's base address and length.
-- interrupts:		Should contain a reference to the interrupt used by this
-			device.
-- interrupt-names:	Should contain interrupt names:
-			 "qdma-queue0": the block0 interrupt
-			 "qdma-queue1": the block1 interrupt
-			 "qdma-queue2": the block2 interrupt
-			 "qdma-queue3": the block3 interrupt
-			 "qdma-error":  the error interrupt
-- fsl,dma-queues:	Should contain number of queues supported.
-- dma-channels:	Number of DMA channels supported
-- block-number:	the virtual block number
-- block-offset:	the offset of different virtual block
-- status-sizes:	status queue size of per virtual block
-- queue-sizes:		command queue size of per virtual block, the size number
-			based on queues
-
-Optional properties:
-
-- dma-channels:		Number of DMA channels supported by the controller.
-- big-endian:		If present registers and hardware scatter/gather descriptors
-			of the qDMA are implemented in big endian mode, otherwise in little
-			mode.
-
-Examples:
-
-	qdma: dma-controller@8390000 {
-			compatible = "fsl,ls1021a-qdma";
-			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
-			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
-			      <0x0 0x838a000 0x0 0x2000>; /* Block regs */
-			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "qdma-error",
-				"qdma-queue0", "qdma-queue1";
-			dma-channels = <8>;
-			block-number = <2>;
-			block-offset = <0x1000>;
-			fsl,dma-queues = <2>;
-			status-sizes = <64>;
-			queue-sizes = <64 64>;
-			big-endian;
-		};
-
-DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.yaml b/Documentation/devicetree/bindings/dma/fsl-qdma.yaml
new file mode 100644
index 000000000000..9401b1f6300d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-qdma.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl-qdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Layerscape SoC qDMA Controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,ls1021a-qdma
+      - items:
+          - enum:
+              - fsl,ls1028a-qdma
+              - fsl,ls1043a-qdma
+              - fsl,ls1046a-qdma
+          - const: fsl,ls1021a-qdma
+
+  reg:
+    items:
+      - description: Controller regs
+      - description: Status regs
+      - description: Block regs
+
+  interrupts:
+    minItems: 2
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: qdma-error
+      - const: qdma-queue0
+      - const: qdma-queue1
+      - const: qdma-queue2
+      - const: qdma-queue3
+
+  dma-channels:
+    minimum: 1
+    maximum: 64
+
+  fsl,dma-queues:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Should contain number of queues supported.
+    minimum: 1
+    maximum: 4
+
+  block-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the virtual block number
+
+  block-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: the offset of different virtual block
+
+  status-sizes:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: status queue size of per virtual block
+
+  queue-sizes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      command queue size of per virtual block, the size number
+      based on queues
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If present registers and hardware scatter/gather descriptors
+      of the qDMA are implemented in big endian mode, otherwise in little
+      mode.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - fsl,dma-queues
+  - block-number
+  - block-offset
+  - status-sizes
+  - queue-sizes
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1028a-qdma
+              - fsl,ls1043a-qdma
+              - fsl,ls1046a-qdma
+    then:
+      properties:
+        interrupts:
+          minItems: 5
+        interrupt-names:
+          minItems: 5
+    else:
+      properties:
+        interrupts:
+          maxItems: 3
+        interrupt-names:
+          maxItems: 3
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dma-controller@8390000 {
+        compatible = "fsl,ls1021a-qdma";
+        reg = <0x8388000 0x1000>, /* Controller regs */
+              <0x8389000 0x1000>, /* Status regs */
+              <0x838a000 0x2000>; /* Block regs */
+        interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1";
+        #dma-cells = <1>;
+        dma-channels = <8>;
+        block-number = <2>;
+        block-offset = <0x1000>;
+        status-sizes = <64>;
+        queue-sizes = <64 64>;
+        big-endian;
+        fsl,dma-queues = <2>;
+    };
+
diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
index dc059d6fd037..d9cca3006e73 100644
--- a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
+++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
@@ -4,25 +4,34 @@
 $id: http://devicetree.org/schemas/dma/ingenic,dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs DMA Controller DT bindings
+title: Ingenic SoCs DMA Controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
-    enum:
-      - ingenic,jz4740-dma
-      - ingenic,jz4725b-dma
-      - ingenic,jz4760-dma
-      - ingenic,jz4760b-dma
-      - ingenic,jz4770-dma
-      - ingenic,jz4780-dma
-      - ingenic,x1000-dma
-      - ingenic,x1830-dma
+    oneOf:
+      - enum:
+          - ingenic,jz4740-dma
+          - ingenic,jz4725b-dma
+          - ingenic,jz4755-dma
+          - ingenic,jz4760-dma
+          - ingenic,jz4760-bdma
+          - ingenic,jz4760-mdma
+          - ingenic,jz4760b-dma
+          - ingenic,jz4760b-bdma
+          - ingenic,jz4760b-mdma
+          - ingenic,jz4770-dma
+          - ingenic,jz4780-dma
+          - ingenic,x1000-dma
+          - ingenic,x1830-dma
+      - items:
+          - const: ingenic,jz4770-bdma
+          - const: ingenic,jz4760b-bdma
 
   reg:
     items:
@@ -36,13 +45,19 @@ properties:
     maxItems: 1
 
   "#dma-cells":
-    const: 2
+    enum: [2, 3]
     description: >
       DMA clients must use the format described in dma.txt, giving a phandle
-      to the DMA controller plus the following 2 integer cells:
+      to the DMA controller plus the following integer cells:
 
-      - Request type: The DMA request type for transfers to/from the
-        device on the allocated channel, as defined in the SoC documentation.
+      - Request type: The DMA request type specifies the device endpoint that
+        will be the source or destination of the DMA transfer.
+        If "#dma-cells" is 2, the request type is a single cell, and the
+        direction will be unidirectional (either RX or TX but not both).
+        If "#dma-cells" is 3, the request type has two cells; the first
+        one corresponds to the host to device direction (TX), the second one
+        corresponds to the device to host direction (RX). The DMA channel is
+        then bidirectional.
 
       - Channel: If set to 0xffffffff, any available channel will be allocated
         for the client. Otherwise, the exact channel specified will be used.
@@ -53,7 +68,7 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: >
       Bitmask of channels to reserve for devices that need a specific
-      channel. These channels will only be assigned when explicitely
+      channel. These channels will only be assigned when explicitly
       requested by a client. The primary use for this is channels 0 and
       1, which can be configured to have special behaviour for NAND/BCH
       when using programmable firmware.
diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
index a5c4be783593..d6bb553a2c6f 100644
--- a/Documentation/devicetree/bindings/dma/intel,ldma.yaml
+++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
@@ -11,7 +11,7 @@ maintainers:
   - mallikarjunax.reddy@intel.com
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/loongson,ls1b-apbdma.yaml b/Documentation/devicetree/bindings/dma/loongson,ls1b-apbdma.yaml
new file mode 100644
index 000000000000..4c7d2fb7b292
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/loongson,ls1b-apbdma.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/loongson,ls1b-apbdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 APB DMA Controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+  Loongson-1 APB DMA controller provides 3 independent channels for
+  peripherals such as NAND, audio playback and capture.
+
+properties:
+  compatible:
+    oneOf:
+      - const: loongson,ls1b-apbdma
+      - items:
+          - enum:
+              - loongson,ls1a-apbdma
+              - loongson,ls1c-apbdma
+          - const: loongson,ls1b-apbdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: NAND interrupt
+      - description: Audio playback interrupt
+      - description: Audio capture interrupt
+
+  interrupt-names:
+    items:
+      - const: ch0
+      - const: ch1
+      - const: ch2
+
+  '#dma-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dma-controller@1fd01160 {
+        compatible = "loongson,ls1b-apbdma";
+        reg = <0x1fd01160 0x4>;
+        interrupt-parent = <&intc0>;
+        interrupts = <13 IRQ_TYPE_EDGE_RISING>,
+                     <14 IRQ_TYPE_EDGE_RISING>,
+                     <15 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "ch0", "ch1", "ch2";
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml b/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml
new file mode 100644
index 000000000000..6a1b49a49a64
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/loongson,ls2x-apbdma.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/loongson,ls2x-apbdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson LS2X APB DMA controller
+
+description:
+  The Loongson LS2X APB DMA controller is used for transferring data
+  between system memory and the peripherals on the APB bus.
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: loongson,ls2k1000-apbdma
+      - items:
+          - const: loongson,ls2k0500-apbdma
+          - const: loongson,ls2k1000-apbdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+    dma-controller@1fe00c00 {
+        compatible = "loongson,ls2k1000-apbdma";
+        reg = <0x1fe00c00 0x8>;
+        interrupt-parent = <&liointc1>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk LOONGSON2_APB_CLK>;
+        #dma-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt b/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt
deleted file mode 100644
index 87740adb2995..000000000000
--- a/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-NXP LPC18xx/43xx DMA MUX (DMA request router)
-
-Required properties:
-- compatible:	"nxp,lpc1850-dmamux"
-- reg:		Memory map for accessing module
-- #dma-cells:	Should be set to <3>.
-		* 1st cell contain the master dma request signal
-		* 2nd cell contain the mux value (0-3) for the peripheral
-		* 3rd cell contain either 1 or 2 depending on the AHB
-		  master used.
-- dma-requests:	Number of DMA requests for the mux
-- dma-masters:	phandle pointing to the DMA controller
-
-The DMA controller node need to have the following poroperties:
-- dma-requests:	Number of DMA requests the controller can handle
-
-Example:
-
-dmac: dma@40002000 {
-	compatible = "nxp,lpc1850-gpdma", "arm,pl080", "arm,primecell";
-	arm,primecell-periphid = <0x00041080>;
-	reg = <0x40002000 0x1000>;
-	interrupts = <2>;
-	clocks = <&ccu1 CLK_CPU_DMA>;
-	clock-names = "apb_pclk";
-	#dma-cells = <2>;
-	dma-channels = <8>;
-	dma-requests = <16>;
-	lli-bus-interface-ahb1;
-	lli-bus-interface-ahb2;
-	mem-bus-interface-ahb1;
-	mem-bus-interface-ahb2;
-	memcpy-burst-size = <256>;
-	memcpy-bus-width = <32>;
-};
-
-dmamux: dma-mux {
-	compatible = "nxp,lpc1850-dmamux";
-	#dma-cells = <3>;
-	dma-requests = <64>;
-	dma-masters = <&dmac>;
-};
-
-uart0: serial@40081000 {
-	compatible = "nxp,lpc1850-uart", "ns16550a";
-	reg = <0x40081000 0x1000>;
-	reg-shift = <2>;
-	interrupts = <24>;
-	clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
-	clock-names = "uartclk", "reg";
-	dmas = <&dmamux 1 1 2
-		&dmamux 2 1 2>;
-	dma-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml b/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml
new file mode 100644
index 000000000000..d447d5207be0
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/marvell,mmp-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MMP DMA controller
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description:
+  Marvell MMP SoCs may have two types of DMA controllers, peripheral and audio.
+
+properties:
+  compatible:
+    enum:
+      - marvell,pdma-1.0
+      - marvell,adma-1.0
+      - marvell,pxa910-squ
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt lines for the controller, may be shared or one per DMA channel
+    minItems: 1
+
+  asram:
+    description:
+      A phandle to the SRAM pool
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  '#dma-channels':
+    deprecated: true
+
+  '#dma-requests':
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#dma-cells'
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,pdma-1.0
+    then:
+      properties:
+        asram: false
+    else:
+      required:
+        - asram
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@d4000000 {
+        compatible = "marvell,pdma-1.0";
+        reg = <0xd4000000 0x10000>;
+        interrupts = <47>;
+        #dma-cells = <2>;
+        dma-channels = <16>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/marvell,orion-xor.yaml b/Documentation/devicetree/bindings/dma/marvell,orion-xor.yaml
new file mode 100644
index 000000000000..add08257ec59
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/marvell,orion-xor.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/marvell,orion-xor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell XOR engine
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: marvell,armada-380-xor
+          - const: marvell,orion-xor
+      - enum:
+          - marvell,armada-3700-xor
+          - marvell,orion-xor
+
+  reg:
+    items:
+      - description: Low registers for the XOR engine
+      - description: High registers for the XOR engine
+
+  clocks:
+    maxItems: 1
+
+patternProperties:
+  "^(channel|xor)[0-9]+$":
+    description: XOR channel sub-node
+    type: object
+    additionalProperties: false
+
+    properties:
+      interrupts:
+        description: Interrupt specifier for the XOR channel
+        items:
+          - description: Interrupt for this channel
+
+      dmacap,memcpy:
+        type: boolean
+        deprecated: true
+        description:
+          Indicates that the XOR channel is capable of memcpy operations
+
+      dmacap,memset:
+        type: boolean
+        deprecated: true
+        description:
+          Indicates that the XOR channel is capable of memset operations
+
+      dmacap,xor:
+        type: boolean
+        deprecated: true
+        description:
+          Indicates that the XOR channel is capable of xor operations
+
+    required:
+      - interrupts
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    xor@d0060900 {
+        compatible = "marvell,orion-xor";
+        reg = <0xd0060900 0x100>,
+              <0xd0060b00 0x100>;
+        clocks = <&coreclk 0>;
+
+        xor00 {
+            interrupts = <51>;
+        };
+        xor01 {
+            interrupts = <52>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/dma/marvell,xor-v2.yaml b/Documentation/devicetree/bindings/dma/marvell,xor-v2.yaml
new file mode 100644
index 000000000000..646b4e779d8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/marvell,xor-v2.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/marvell,xor-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell XOR v2 engines
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+properties:
+  compatible:
+    oneOf:
+      - const: marvell,xor-v2
+      - items:
+          - enum:
+              - marvell,armada-7k-xor
+          - const: marvell,xor-v2
+
+  reg:
+    items:
+      - description: DMA registers
+      - description: global registers
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: reg
+
+  msi-parent:
+    description:
+      Phandle to the MSI-capable interrupt controller used for
+      interrupts.
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - msi-parent
+  - dma-coherent
+
+additionalProperties: false
+
+examples:
+  - |
+    xor0@6a0000 {
+        compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
+        reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>;
+        clocks = <&ap_clk 0>, <&ap_clk 1>;
+        clock-names = "core", "reg";
+        msi-parent = <&gic_v2m0>;
+        dma-coherent;
+    };
diff --git a/Documentation/devicetree/bindings/dma/mediatek,mt7622-hsdma.yaml b/Documentation/devicetree/bindings/dma/mediatek,mt7622-hsdma.yaml
new file mode 100644
index 000000000000..3f1e120e40a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mediatek,mt7622-hsdma.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mediatek,mt7622-hsdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek High-Speed DMA Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-hsdma
+      - mediatek,mt7623-hsdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: hsdma
+
+  power-domains:
+    maxItems: 1
+
+  "#dma-cells":
+    description: Channel number
+    const: 1
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt2701-power.h>
+
+    dma-controller@1b007000 {
+        compatible = "mediatek,mt7623-hsdma";
+        reg = <0x1b007000 0x1000>;
+        interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&ethsys CLK_ETHSYS_HSDMA>;
+        clock-names = "hsdma";
+        power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
new file mode 100644
index 000000000000..dab468a88942
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mediatek,uart-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek UART APDMA controller
+
+maintainers:
+  - Long Cheng <long.cheng@mediatek.com>
+
+description: |
+  The MediaTek UART APDMA controller provides DMA capabilities
+  for the UART peripheral bus.
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2712-uart-dma
+              - mediatek,mt6795-uart-dma
+              - mediatek,mt8365-uart-dma
+              - mediatek,mt8516-uart-dma
+          - const: mediatek,mt6577-uart-dma
+      - enum:
+          - mediatek,mt6577-uart-dma
+
+  reg:
+    minItems: 1
+    maxItems: 16
+
+  interrupts:
+    description: |
+      TX, RX interrupt lines for each UART APDMA channel
+    minItems: 1
+    maxItems: 16
+
+  clocks:
+    description: Must contain one entry for the APDMA main clock
+    maxItems: 1
+
+  clock-names:
+    const: apdma
+
+  "#dma-cells":
+    const: 1
+    description: |
+      The first cell specifies the UART APDMA channel number
+
+  dma-requests:
+    description: |
+      Number of virtual channels of the UART APDMA controller
+    maximum: 16
+
+  mediatek,dma-33bits:
+    type: boolean
+    description: Enable 33-bits UART APDMA support
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+if:
+  not:
+    required:
+      - dma-requests
+then:
+  properties:
+    interrupts:
+      maxItems: 8
+    reg:
+      maxItems: 8
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt2712-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        apdma: dma-controller@11000400 {
+            compatible = "mediatek,mt2712-uart-dma",
+                         "mediatek,mt6577-uart-dma";
+            reg = <0 0x11000400 0 0x80>,
+                  <0 0x11000480 0 0x80>,
+                  <0 0x11000500 0 0x80>,
+                  <0 0x11000580 0 0x80>,
+                  <0 0x11000600 0 0x80>,
+                  <0 0x11000680 0 0x80>,
+                  <0 0x11000700 0 0x80>,
+                  <0 0x11000780 0 0x80>,
+                  <0 0x11000800 0 0x80>,
+                  <0 0x11000880 0 0x80>,
+                  <0 0x11000900 0 0x80>,
+                  <0 0x11000980 0 0x80>;
+            interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+            dma-requests = <12>;
+            clocks = <&pericfg CLK_PERI_AP_DMA>;
+            clock-names = "apdma";
+            mediatek,dma-33bits;
+            #dma-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt
deleted file mode 100644
index 8f7364a7b349..000000000000
--- a/Documentation/devicetree/bindings/dma/mmp-dma.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-* MARVELL MMP DMA controller
-
-Marvell Peripheral DMA Controller
-Used platforms: pxa688, pxa910, pxa3xx, etc
-
-Required properties:
-- compatible: Should be "marvell,pdma-1.0"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
-		or one irq for pdma device
-
-Optional properties:
-- #dma-channels: Number of DMA channels supported by the controller (defaults
-  to 32 when not specified)
-- #dma-requests: Number of DMA requestor lines supported by the controller
-  (defaults to 32 when not specified)
-
-"marvell,pdma-1.0"
-Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
-
-Examples:
-
-/*
- * Each channel has specific irq
- * ICU parse out irq channel from ICU register,
- * while DMA controller may not able to distinguish the irq channel
- * Using this method, interrupt-parent is required as demuxer
- * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
- * 18~21 is ADMA irq
- */
-pdma: dma-controller@d4000000 {
-	      compatible = "marvell,pdma-1.0";
-	      reg = <0xd4000000 0x10000>;
-	      interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
-	      interrupt-parent = <&intcmux32>;
-	      #dma-channels = <16>;
-      };
-
-/*
- * One irq for all channels
- * Dmaengine driver (DMA controller) distinguish irq channel via
- * parsing internal register
- */
-pdma: dma-controller@d4000000 {
-	      compatible = "marvell,pdma-1.0";
-	      reg = <0xd4000000 0x10000>;
-	      interrupts = <47>;
-	      #dma-channels = <16>;
-      };
-
-
-Marvell Two Channel DMA Controller used specifically for audio
-Used platforms: pxa688, pxa910
-
-Required properties:
-- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
-- reg: Should contain DMA registers location and length.
-- interrupts: Either contain all of the per-channel DMA interrupts
-		or one irq for dma device
-
-"marvell,adma-1.0" used on pxa688
-"marvell,pxa910-squ" used on pxa910
-
-Examples:
-
-/* each channel has specific irq */
-adma0: dma-controller@d42a0800 {
-	      compatible = "marvell,adma-1.0";
-	      reg = <0xd42a0800 0x100>;
-	      interrupts = <18 19>;
-	      interrupt-parent = <&intcmux32>;
-      };
-
-/* One irq for all channels */
-squ: dma-controller@d42a0800 {
-	      compatible = "marvell,pxa910-squ";
-	      reg = <0xd42a0800 0x100>;
-	      interrupts = <46>;
-      };
diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git a/Documentation/devicetree/bindings/dma/mtk-hsdma.txt b/Documentation/devicetree/bindings/dma/mtk-hsdma.txt
deleted file mode 100644
index 4bb317359dc6..000000000000
--- a/Documentation/devicetree/bindings/dma/mtk-hsdma.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-MediaTek High-Speed DMA Controller
-==================================
-
-This device follows the generic DMA bindings defined in dma/dma.txt.
-
-Required properties:
-
-- compatible:	Must be one of
-		  "mediatek,mt7622-hsdma": for MT7622 SoC
-		  "mediatek,mt7623-hsdma": for MT7623 SoC
-- reg:		Should contain the register's base address and length.
-- interrupts:	Should contain a reference to the interrupt used by this
-		device.
-- clocks:	Should be the clock specifiers corresponding to the entry in
-		clock-names property.
-- clock-names:	Should contain "hsdma" entries.
-- power-domains: Phandle to the power domain that the device is part of
-- #dma-cells: 	The length of the DMA specifier, must be <1>. This one cell
-		in dmas property of a client device represents the channel
-		number.
-Example:
-
-        hsdma: dma-controller@1b007000 {
-		compatible = "mediatek,mt7623-hsdma";
-		reg = <0 0x1b007000 0 0x1000>;
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&ethsys CLK_ETHSYS_HSDMA>;
-		clock-names = "hsdma";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-		#dma-cells = <1>;
-	};
-
-DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
deleted file mode 100644
index fef9c1eeb264..000000000000
--- a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Mediatek UART APDMA Controller
-
-Required properties:
-- compatible should contain:
-  * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
-  * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
-  * "mediatek,mt8516-uart-dma", "mediatek,mt6577" for MT8516 SoC
-
-- reg: The base address of the APDMA register bank.
-
-- interrupts: A single interrupt specifier.
- One interrupt per dma-requests, or 8 if no dma-requests property is present
-
-- dma-requests: The number of DMA channels
-
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: The APDMA clock for register accesses
-
-- mediatek,dma-33bits: Present if the DMA requires support
-
-Examples:
-
-	apdma: dma-controller@11000400 {
-		compatible = "mediatek,mt2712-uart-dma",
-			     "mediatek,mt6577-uart-dma";
-		reg = <0 0x11000400 0 0x80>,
-		      <0 0x11000480 0 0x80>,
-		      <0 0x11000500 0 0x80>,
-		      <0 0x11000580 0 0x80>,
-		      <0 0x11000600 0 0x80>,
-		      <0 0x11000680 0 0x80>,
-		      <0 0x11000700 0 0x80>,
-		      <0 0x11000780 0 0x80>,
-		      <0 0x11000800 0 0x80>,
-		      <0 0x11000880 0 0x80>,
-		      <0 0x11000900 0 0x80>,
-		      <0 0x11000980 0 0x80>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
-		dma-requests = <12>;
-		clocks = <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "apdma";
-		mediatek,dma-33bits;
-		#dma-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
deleted file mode 100644
index 9c38bbe7e6d7..000000000000
--- a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Marvell XOR v2 engines
-
-Required properties:
-- compatible: one of the following values:
-    "marvell,armada-7k-xor"
-    "marvell,xor-v2"
-- reg: Should contain registers location and length (two sets)
-    the first set is the DMA registers
-    the second set is the global registers
-- msi-parent: Phandle to the MSI-capable interrupt controller used for
-  interrupts.
-
-Optional properties:
-- clocks: Optional reference to the clocks used by the XOR engine.
-- clock-names: mandatory if there is a second clock, in this case the
-   name must be "core" for the first clock and "reg" for the second
-   one
-
-
-Example:
-
-	xor0@400000 {
-		compatible = "marvell,xor-v2";
-		reg = <0x400000 0x1000>,
-		      <0x410000 0x1000>;
-		msi-parent = <&gic_v2m0>;
-		dma-coherent;
-	};
diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt
deleted file mode 100644
index 0ffb4d8766a8..000000000000
--- a/Documentation/devicetree/bindings/dma/mv-xor.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Marvell XOR engines
-
-Required properties:
-- compatible: Should be one of the following:
-  - "marvell,orion-xor"
-  - "marvell,armada-380-xor"
-  - "marvell,armada-3700-xor".
-- reg: Should contain registers location and length (two sets)
-    the first set is the low registers, the second set the high
-    registers for the XOR engine.
-- clocks: pointer to the reference clock
-
-The DT node must also contains sub-nodes for each XOR channel that the
-XOR engine has. Those sub-nodes have the following required
-properties:
-- interrupts: interrupt of the XOR channel
-
-The sub-nodes used to contain one or several of the following
-properties, but they are now deprecated:
-- dmacap,memcpy to indicate that the XOR channel is capable of memcpy operations
-- dmacap,memset to indicate that the XOR channel is capable of memset operations
-- dmacap,xor to indicate that the XOR channel is capable of xor operations
-- dmacap,interrupt to indicate that the XOR channel is capable of
-  generating interrupts
-
-Example:
-
-xor@d0060900 {
-	compatible = "marvell,orion-xor";
-	reg = <0xd0060900 0x100
-	       0xd0060b00 0x100>;
-	clocks = <&coreclk 0>;
-
-	xor00 {
-	      interrupts = <51>;
-	};
-	xor01 {
-	      interrupts = <52>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
new file mode 100644
index 000000000000..0dabe9bbb219
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nvidia,tegra186-gpc-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPC DMA Controller
+
+description: |
+  The Tegra General Purpose Central (GPC) DMA controller is used for faster
+  data transfers between memory to memory, memory to device and device to
+  memory.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Rajesh Gumasta <rgumasta@nvidia.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-gpcdma
+      - items:
+          - enum:
+              - nvidia,tegra264-gpcdma
+              - nvidia,tegra234-gpcdma
+              - nvidia,tegra194-gpcdma
+          - const: nvidia,tegra186-gpcdma
+
+  "#dma-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Should contain all of the per-channel DMA interrupts in
+      ascending order with respect to the DMA channel index.
+    minItems: 1
+    maxItems: 32
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: gpcdma
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  dma-channel-mask:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - reset-names
+  - "#dma-cells"
+  - iommus
+  - dma-channel-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    dma-controller@2600000 {
+        compatible = "nvidia,tegra186-gpcdma";
+        reg = <0x2600000 0x210000>;
+        resets = <&bpmp TEGRA186_RESET_GPCDMA>;
+        reset-names = "gpcdma";
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <1>;
+        iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
+        dma-coherent;
+        dma-channel-mask = <0xfffffffe>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt
deleted file mode 100644
index c6908e7c42cc..000000000000
--- a/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* NVIDIA Tegra APB DMA controller
-
-Required properties:
-- compatible: Should be "nvidia,<chip>-apbdma"
-- reg: Should contain DMA registers location and length. This shuld include
-  all of the per-channel registers.
-- interrupts: Should contain all of the per-channel DMA interrupts.
-- clocks: Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - dma
-- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
-  client nodes' dmas properties. The specifier represents the DMA request
-  select value for the peripheral. For more details, consult the Tegra TRM's
-  documentation of the APB DMA channel control register REQ_SEL field.
-
-Examples:
-
-apbdma: dma@6000a000 {
-	compatible = "nvidia,tegra20-apbdma";
-	reg = <0x6000a000 0x1200>;
-	interrupts = < 0 136 0x04
-		       0 137 0x04
-		       0 138 0x04
-		       0 139 0x04
-		       0 140 0x04
-		       0 141 0x04
-		       0 142 0x04
-		       0 143 0x04
-		       0 144 0x04
-		       0 145 0x04
-		       0 146 0x04
-		       0 147 0x04
-		       0 148 0x04
-		       0 149 0x04
-		       0 150 0x04
-		       0 151 0x04 >;
-	clocks = <&tegra_car 34>;
-	resets = <&tegra_car 34>;
-	reset-names = "dma";
-	#dma-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.yaml
new file mode 100644
index 000000000000..ea40c4e27a97
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nvidia,tegra20-apbdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra APB DMA Controller
+
+description:
+  The NVIDIA Tegra APB DMA controller is a hardware component that
+  enables direct memory access (DMA) on Tegra systems. It facilitates
+  data transfer between I/O devices and main memory without constant
+  CPU intervention.
+
+maintainers:
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra114-apbdma
+          - nvidia,tegra20-apbdma
+      - items:
+          - const: nvidia,tegra30-apbdma
+          - const: nvidia,tegra20-apbdma
+      - items:
+          - enum:
+              - nvidia,tegra124-apbdma
+              - nvidia,tegra210-apbdma
+          - const: nvidia,tegra148-apbdma
+
+  reg:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: dma
+
+  interrupts:
+    description:
+      Should contain all of the per-channel DMA interrupts in
+      ascending order with respect to the DMA channel index.
+    minItems: 1
+    maxItems: 32
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: dma
+
+required:
+  - compatible
+  - reg
+  - "#dma-cells"
+  - clocks
+  - interrupts
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+    dma-controller@6000a000 {
+        compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+        reg = <0x6000a000 0x1200>;
+        interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car 34>;
+        resets = <&tegra_car 34>;
+        reset-names = "dma";
+        #dma-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
index 5c2e2f156e31..da0235e451d6 100644
--- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
@@ -13,21 +13,33 @@ description: |
 maintainers:
   - Jon Hunter <jonathanh@nvidia.com>
 
-allOf:
-  - $ref: "dma-controller.yaml#"
-
 properties:
   compatible:
     oneOf:
       - enum:
           - nvidia,tegra210-adma
           - nvidia,tegra186-adma
+          - nvidia,tegra264-adma
       - items:
-          - const: nvidia,tegra194-adma
+          - enum:
+              - nvidia,tegra234-adma
+              - nvidia,tegra194-adma
           - const: nvidia,tegra186-adma
 
   reg:
-    maxItems: 1
+    description:
+      The 'page' region describes the address space of the page
+      used for accessing the DMA channel registers. The 'global'
+      region describes the address space of the global DMA registers.
+      In the absence of the 'reg-names' property, there must be a
+      single entry that covers the address space of the global DMA
+      registers and the DMA channel registers.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     description: |
@@ -51,6 +63,9 @@ properties:
       ADMA_CHn_CTRL register.
     const: 1
 
+  dma-channel-mask:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -58,6 +73,50 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra210-adma
+    then:
+      properties:
+        reg:
+          items:
+            - description: Full address space range of DMA registers.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-adma
+              - nvidia,tegra264-adma
+    then:
+      anyOf:
+        - properties:
+            reg:
+              items:
+                - description: Full address space range of DMA registers.
+        - properties:
+            reg:
+              items:
+                - description: Channel Page address space range of DMA registers.
+            reg-names:
+              items:
+                - const: page
+        - properties:
+            reg:
+              items:
+                - description: Channel Page address space range of DMA registers.
+                - description: Global Page address space range of DMA registers.
+            reg-names:
+              items:
+                - const: page
+                - const: global
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/dma/nxp,lpc3220-dmamux.yaml b/Documentation/devicetree/bindings/dma/nxp,lpc3220-dmamux.yaml
new file mode 100644
index 000000000000..32f208744154
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nxp,lpc3220-dmamux.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nxp,lpc3220-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DMA multiplexer for LPC32XX SoC (DMA request router)
+
+maintainers:
+  - J.M.B. Downing <jonathan.downing@nautel.com>
+  - Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
+
+allOf:
+  - $ref: dma-router.yaml#
+
+properties:
+  compatible:
+    const: nxp,lpc3220-dmamux
+
+  reg:
+    maxItems: 1
+
+  dma-masters:
+    description: phandle to a dma node compatible with arm,pl080
+    maxItems: 1
+
+  "#dma-cells":
+    const: 3
+    description: |
+      First two cells same as for device pointed in dma-masters.
+      Third cell represents mux value for the request.
+
+required:
+  - compatible
+  - reg
+  - dma-masters
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-router@7c {
+      compatible = "nxp,lpc3220-dmamux";
+      reg = <0x7c 0x8>;
+      dma-masters = <&dma>;
+      #dma-cells = <3>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.yaml b/Documentation/devicetree/bindings/dma/owl-dma.yaml
index 93b4847554fb..ec8b3dc37ca4 100644
--- a/Documentation/devicetree/bindings/dma/owl-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/owl-dma.yaml
@@ -15,7 +15,7 @@ maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/qcom,adm.yaml b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
new file mode 100644
index 000000000000..6a9d7bc74aff
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,adm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ADM DMA Controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  QCOM ADM DMA controller provides DMA capabilities for
+  peripheral buses such as NAND and SPI.
+
+properties:
+  compatible:
+    const: qcom,adm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: phandle to the core clock
+      - description: phandle to the iface clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  resets:
+    items:
+      - description: phandle to the clk reset
+      - description: phandle to the pbus reset
+      - description: phandle to the c0 reset
+      - description: phandle to the c1 reset
+      - description: phandle to the c2 reset
+
+  reset-names:
+    items:
+      - const: clk
+      - const: pbus
+      - const: c0
+      - const: c1
+      - const: c2
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: indicates the security domain identifier used in the secure world.
+    minimum: 0
+    maximum: 255
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - qcom,ee
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+
+    adm_dma: dma-controller@18300000 {
+        compatible = "qcom,adm";
+        reg = <0x18300000 0x100000>;
+        interrupts = <0 170 0>;
+        #dma-cells = <1>;
+
+        clocks = <&gcc ADM0_CLK>,
+                  <&gcc ADM0_PBUS_CLK>;
+        clock-names = "core", "iface";
+
+        resets = <&gcc ADM0_RESET>,
+                  <&gcc ADM0_PBUS_RESET>,
+                  <&gcc ADM0_C0_RESET>,
+                  <&gcc ADM0_C1_RESET>,
+                  <&gcc ADM0_C2_RESET>;
+        reset-names = "clk", "pbus", "c0", "c1", "c2";
+        qcom,ee = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
new file mode 100644
index 000000000000..6493a6968bb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,bam-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc BAM DMA controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <andersson@kernel.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          # APQ8064, IPQ8064 and MSM8960
+          - qcom,bam-v1.3.0
+          # MSM8974, APQ8074 and APQ8084
+          - qcom,bam-v1.4.0
+          # MSM8916, SDM630
+          - qcom,bam-v1.7.0
+      - items:
+          - enum:
+              # SDM845, SM6115, SM8150, SM8250 and QCM2290
+              - qcom,bam-v1.7.4
+          - const: qcom,bam-v1.7.0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: bam_clk
+
+  "#dma-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  dma-coherent: true
+
+  iommus:
+    minItems: 1
+    maxItems: 6
+
+  num-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of DMA channels in a remotely controlled bam.
+
+  qcom,controlled-remotely:
+    type: boolean
+    description:
+      Indicates that the bam is controlled by remote processor i.e. execution
+      environment.
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description:
+      Indicates the active Execution Environment identifier (0-7) used in the
+      secure world.
+
+  qcom,num-ees:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of Execution Environments in a remotely
+      controlled bam.
+
+  qcom,powered-remotely:
+    type: boolean
+    description:
+      Indicates that the bam is powered up by a remote processor but must be
+      initialized by the local processor.
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#dma-cells"
+  - interrupts
+  - qcom,ee
+  - reg
+
+anyOf:
+  - required:
+      - qcom,powered-remotely
+      - num-channels
+      - qcom,num-ees
+  - required:
+      - qcom,controlled-remotely
+      - num-channels
+      - qcom,num-ees
+  - required:
+      - clocks
+      - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+
+    dma-controller@f9944000 {
+        compatible = "qcom,bam-v1.4.0";
+        reg = <0xf9944000 0x19000>;
+        interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+        clock-names = "bam_clk";
+        #dma-cells = <1>;
+        qcom,ee = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
index e614fe3187bb..bbe4da2a1105 100644
--- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
+++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
@@ -14,14 +14,42 @@ description: |
   peripheral buses such as I2C, UART, and SPI.
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
-    enum:
-      - qcom,sdm845-gpi-dma
-      - qcom,sm8150-gpi-dma
-      - qcom,sm8250-gpi-dma
+    oneOf:
+      - enum:
+          - qcom,sdm845-gpi-dma
+          - qcom,sm6350-gpi-dma
+      - items:
+          - enum:
+              - qcom,milos-gpi-dma
+              - qcom,qcm2290-gpi-dma
+              - qcom,qcs8300-gpi-dma
+              - qcom,qdu1000-gpi-dma
+              - qcom,sa8775p-gpi-dma
+              - qcom,sar2130p-gpi-dma
+              - qcom,sc7280-gpi-dma
+              - qcom,sc8280xp-gpi-dma
+              - qcom,sdx75-gpi-dma
+              - qcom,sm6115-gpi-dma
+              - qcom,sm6375-gpi-dma
+              - qcom,sm8350-gpi-dma
+              - qcom,sm8450-gpi-dma
+              - qcom,sm8550-gpi-dma
+              - qcom,sm8650-gpi-dma
+              - qcom,sm8750-gpi-dma
+              - qcom,x1e80100-gpi-dma
+          - const: qcom,sm6350-gpi-dma
+      - items:
+          - enum:
+              - qcom,qcs615-gpi-dma
+              - qcom,sdm670-gpi-dma
+              - qcom,sm6125-gpi-dma
+              - qcom,sm8150-gpi-dma
+              - qcom,sm8250-gpi-dma
+          - const: qcom,sdm845-gpi-dma
 
   reg:
     maxItems: 1
@@ -29,6 +57,7 @@ properties:
   interrupts:
     description:
       Interrupt lines for each GPI instance
+    minItems: 1
     maxItems: 13
 
   "#dma-cells":
@@ -50,6 +79,8 @@ properties:
   dma-channel-mask:
     maxItems: 1
 
+  dma-coherent: true
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt
deleted file mode 100644
index 9d3b2f917b7b..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-QCOM ADM DMA Controller
-
-Required properties:
-- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
-- reg: Address range for DMA registers
-- interrupts: Should contain one interrupt shared by all channels
-- #dma-cells: must be <2>.  First cell denotes the channel number.  Second cell
-  denotes CRCI (client rate control interface) flow control assignment.
-- clocks: Should contain the core clock and interface clock.
-- clock-names: Must contain "core" for the core clock and "iface" for the
-  interface clock.
-- resets: Must contain an entry for each entry in reset names.
-- reset-names: Must include the following entries:
-  - clk
-  - c0
-  - c1
-  - c2
-- qcom,ee: indicates the security domain identifier used in the secure world.
-
-Example:
-		adm_dma: dma@18300000 {
-			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
-			interrupts = <0 170 0>;
-			#dma-cells = <2>;
-
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
-
-			resets = <&gcc ADM0_RESET>,
-				<&gcc ADM0_C0_RESET>,
-				<&gcc ADM0_C1_RESET>,
-				<&gcc ADM0_C2_RESET>;
-			reset-names = "clk", "c0", "c1", "c2";
-			qcom,ee = <0>;
-		};
-
-DMA clients must use the format descripted in the dma.txt file, using a three
-cell specifier for each channel.
-
-Each dmas request consists of 3 cells:
- 1. phandle pointing to the DMA controller
- 2. channel number
- 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
-    The CRCI is used for flow control.  It identifies the peripheral device that
-    is the source/destination for the transferred data.
-
-Example:
-
-	spi4: spi@1a280000 {
-		spi-max-frequency = <50000000>;
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 0>;
-
-		dmas = <&adm_dma 6 9>,
-			<&adm_dma 5 10>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
deleted file mode 100644
index 6e9a5497b3f2..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-QCOM BAM DMA controller
-
-Required properties:
-- compatible: must be one of the following:
- * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
- * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
- * "qcom,bam-v1.7.0" for MSM8916
-- reg: Address range for DMA registers
-- interrupts: Should contain the one interrupt shared by all channels
-- #dma-cells: must be <1>, the cell in the dmas property of the client device
-  represents the channel number
-- clocks: required clock
-- clock-names: must contain "bam_clk" entry
-- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
-  the secure world.
-- qcom,controlled-remotely : optional, indicates that the bam is controlled by
-  remote proccessor i.e. execution environment.
-- qcom,powered-remotely : optional, indicates that the bam is powered up by
-  a remote processor but must be initialized by the local processor.
-- num-channels : optional, indicates supported number of DMA channels in a
-  remotely controlled bam.
-- qcom,num-ees : optional, indicates supported number of Execution Environments
-  in a remotely controlled bam.
-
-Example:
-
-	uart-bam: dma@f9984000 = {
-		compatible = "qcom,bam-v1.4.0";
-		reg = <0xf9984000 0x15000>;
-		interrupts = <0 94 0>;
-		clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
-		clock-names = "bam_clk";
-		#dma-cells = <1>;
-		qcom,ee = <0>;
-	};
-
-DMA clients must use the format described in the dma.txt file, using a two cell
-specifier for each channel.
-
-Example:
-	serial@f991e000 {
-		compatible = "qcom,msm-uart";
-		reg = <0xf991e000 0x1000>
-			<0xf9944000 0x19000>;
-		interrupts = <0 108 0>;
-		clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
-			<&gcc GCC_BLSP1_AHB_CLK>;
-		clock-names = "core", "iface";
-
-		dmas = <&uart-bam 0>, <&uart-bam 1>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
deleted file mode 100644
index 1ae4748730a8..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-Qualcomm Technologies HIDMA Management interface
-
-Qualcomm Technologies HIDMA is a high speed DMA device. It only supports
-memcpy and memset capabilities. It has been designed for virtualized
-environments.
-
-Each HIDMA HW instance consists of multiple DMA channels. These channels
-share the same bandwidth. The bandwidth utilization can be partitioned
-among channels based on the priority and weight assignments.
-
-There are only two priority levels and 15 weigh assignments possible.
-
-Other parameters here determine how much of the system bus this HIDMA
-instance can use like maximum read/write request and number of bytes to
-read/write in a single burst.
-
-Main node required properties:
-- compatible: "qcom,hidma-mgmt-1.0";
-- reg: Address range for DMA device
-- dma-channels: Number of channels supported by this DMA controller.
-- max-write-burst-bytes: Maximum write burst in bytes that HIDMA can
-  occupy the bus for in a single transaction. A memcpy requested is
-  fragmented to multiples of this amount. This parameter is used while
-  writing into destination memory. Setting this value incorrectly can
-  starve other peripherals in the system.
-- max-read-burst-bytes: Maximum read burst in bytes that HIDMA can
-  occupy the bus for in a single transaction. A memcpy request is
-  fragmented to multiples of this amount. This parameter is used while
-  reading the source memory. Setting this value incorrectly can starve
-  other peripherals in the system.
-- max-write-transactions: This value is how many times a write burst is
-  applied back to back while writing to the destination before yielding
-  the bus.
-- max-read-transactions: This value is how many times a read burst is
-  applied back to back while reading the source before yielding the bus.
-- channel-reset-timeout-cycles: Channel reset timeout in cycles for this SOC.
-  Once a reset is applied to the HW, HW starts a timer for reset operation
-  to confirm. If reset is not completed within this time, HW reports reset
-  failure.
-
-Sub-nodes:
-
-HIDMA has one or more DMA channels that are used to move data from one
-memory location to another.
-
-When the OS is not in control of the management interface (i.e. it's a guest),
-the channel nodes appear on their own, not under a management node.
-
-Required properties:
-- compatible: must contain "qcom,hidma-1.0" for initial HW or
-  "qcom,hidma-1.1"/"qcom,hidma-1.2" for MSI capable HW.
-- reg: Addresses for the transfer and event channel
-- interrupts: Should contain the event interrupt
-- desc-count: Number of asynchronous requests this channel can handle
-- iommus: required a iommu node
-
-Optional properties for MSI:
-- msi-parent : See the generic MSI binding described in
- devicetree/bindings/interrupt-controller/msi.txt for a description of the
- msi-parent property.
-
-Example:
-
-Hypervisor OS configuration:
-
-	hidma-mgmt@f9984000 = {
-		compatible = "qcom,hidma-mgmt-1.0";
-		reg = <0xf9984000 0x15000>;
-		dma-channels = <6>;
-		max-write-burst-bytes = <1024>;
-		max-read-burst-bytes = <1024>;
-		max-write-transactions = <31>;
-		max-read-transactions = <31>;
-		channel-reset-timeout-cycles = <0x500>;
-
-		hidma_24: dma-controller@5c050000 {
-			compatible = "qcom,hidma-1.0";
-			reg = <0 0x5c050000 0x0 0x1000>,
-			      <0 0x5c0b0000 0x0 0x1000>;
-			interrupts = <0 389 0>;
-			desc-count = <10>;
-			iommus = <&system_mmu>;
-		};
-	};
-
-Guest OS configuration:
-
-	hidma_24: dma-controller@5c050000 {
-		compatible = "qcom,hidma-1.0";
-		reg = <0 0x5c050000 0x0 0x1000>,
-		      <0 0x5c0b0000 0x0 0x1000>;
-		interrupts = <0 389 0>;
-		desc-count = <10>;
-		iommus = <&system_mmu>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
index d8142cbd13d3..04fc4a99a7cb 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
@@ -42,7 +42,12 @@ properties:
           - const: renesas,rcar-dmac
 
       - items:
-          - const: renesas,dmac-r8a779a0 # R-Car V3U
+          - enum:
+              - renesas,dmac-r8a779a0     # R-Car V3U
+              - renesas,dmac-r8a779f0     # R-Car S4-8
+              - renesas,dmac-r8a779g0     # R-Car V4H
+              - renesas,dmac-r8a779h0     # R-Car V4M
+          - const: renesas,rcar-gen4-dmac # R-Car Gen4
 
   reg: true
 
@@ -117,7 +122,7 @@ if:
     compatible:
       contains:
         enum:
-          - renesas,dmac-r8a779a0
+          - renesas,rcar-gen4-dmac
 then:
   properties:
     reg:
diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
index 7a4f415d74dc..f891cfcc48c7 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
@@ -4,25 +4,35 @@
 $id: http://devicetree.org/schemas/dma/renesas,rz-dmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/G2L DMA Controller
+title: Renesas RZ DMA Controller
 
 maintainers:
   - Biju Das <biju.das.jz@bp.renesas.com>
 
-allOf:
-  - $ref: "dma-controller.yaml#"
-
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r9a07g044-dmac # RZ/G2{L,LC}
-      - const: renesas,rz-dmac
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r7s72100-dmac # RZ/A1H
+              - renesas,r9a07g043-dmac # RZ/G2UL and RZ/Five
+              - renesas,r9a07g044-dmac # RZ/G2{L,LC}
+              - renesas,r9a07g054-dmac # RZ/V2L
+              - renesas,r9a08g045-dmac # RZ/G3S
+          - const: renesas,rz-dmac
+
+      - items:
+          - enum:
+              - renesas,r9a09g047-dmac # RZ/G3E
+          - const: renesas,r9a09g057-dmac
+
+      - const: renesas,r9a09g057-dmac # RZ/V2H(P)
 
   reg:
     items:
       - description: Control and channel register block
       - description: DMA extended resource selector block
+    minItems: 1
 
   interrupts:
     maxItems: 17
@@ -51,14 +61,20 @@ properties:
     items:
       - description: DMA main clock
       - description: DMA register access clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: main
+      - const: register
 
   '#dma-cells':
     const: 1
     description:
-      The cell specifies the encoded MID/RID values of the DMAC port
-      connected to the DMA client and the slave channel configuration
-      parameters.
-      bits[0:9] - Specifies MID/RID value
+      The cell specifies the encoded MID/RID or the REQ No values of
+      the DMAC port connected to the DMA client and the slave channel
+      configuration parameters.
+      bits[0:9] - Specifies the MID/RID or the REQ No value
       bit[10] - Specifies DMA request high enable (HIEN)
       bit[11] - Specifies DMA request detection type (LVL)
       bits[12:14] - Specifies DMAACK output mode (AM)
@@ -74,17 +90,103 @@ properties:
     items:
       - description: Reset for DMA ARESETN reset terminal
       - description: Reset for DMA RST_ASYNC reset terminal
+    minItems: 1
+
+  reset-names:
+    items:
+      - const: arst
+      - const: rst_async
+
+  renesas,icu:
+    description:
+      It must contain the phandle to the ICU and the index of the DMAC as seen
+      from the ICU.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the ICU node.
+          - description:
+              The number of the DMAC as seen from the ICU, i.e. parameter k from
+              register ICU_DMkSELy. This may differ from the actual DMAC instance
+              number.
 
 required:
   - compatible
   - reg
   - interrupts
   - interrupt-names
-  - clocks
   - '#dma-cells'
   - dma-channels
-  - power-domains
-  - resets
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g043-dmac
+              - renesas,r9a07g044-dmac
+              - renesas,r9a07g054-dmac
+              - renesas,r9a08g045-dmac
+    then:
+      properties:
+        reg:
+          minItems: 2
+        clocks:
+          minItems: 2
+        resets:
+          minItems: 2
+
+        renesas,icu: false
+
+      required:
+        - clocks
+        - clock-names
+        - power-domains
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r7s72100-dmac
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+        clocks: false
+        clock-names: false
+        power-domains: false
+        resets: false
+        reset-names: false
+        renesas,icu: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g057-dmac
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        clocks:
+          maxItems: 1
+        resets:
+          maxItems: 1
+
+        clock-names: false
+        reset-names: false
+
+      required:
+        - clocks
+        - power-domains
+        - renesas,icu
+        - resets
 
 additionalProperties: false
 
@@ -122,9 +224,11 @@ examples:
                           "ch12", "ch13", "ch14", "ch15";
         clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
                  <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
+        clock-names = "main", "register";
         power-domains = <&cpg>;
         resets = <&cpg R9A07G044_DMAC_ARESETN>,
                  <&cpg R9A07G044_DMAC_RST_ASYNC>;
+        reset-names = "arst", "rst_async";
         #dma-cells = <1>;
         dma-channels = <16>;
     };
diff --git a/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
new file mode 100644
index 000000000000..ee9833dcc36c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rzn1-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 DMA mux
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: dma-router.yaml#
+
+properties:
+  compatible:
+    const: renesas,rzn1-dmamux
+
+  reg:
+    maxItems: 1
+    description: DMA mux first register offset within the system control parent.
+
+  '#dma-cells':
+    const: 6
+    description:
+      The first four cells are dedicated to the master DMA controller. The fifth
+      cell gives the DMA mux bit index that must be set starting from 0. The
+      sixth cell gives the binary value that must be written there, ie. 0 or 1.
+
+  dma-masters:
+    minItems: 1
+    maxItems: 2
+
+  dma-requests:
+    const: 32
+
+required:
+  - reg
+  - dma-requests
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-router@a0 {
+      compatible = "renesas,rzn1-dmamux";
+      reg = <0xa0 4>;
+      #dma-cells = <6>;
+      dma-masters = <&dma0 &dma1>;
+      dma-requests = <32>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
index ab287c652b2c..17813599fccb 100644
--- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
index d32a71b975fe..609e38901434 100644
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -22,10 +22,27 @@ description: |
 
   https://static.dev.sifive.com/FU540-C000-v1.0.pdf
 
+allOf:
+  - $ref: dma-controller.yaml#
+
 properties:
   compatible:
-    items:
-      - const: sifive,fu540-c000-pdma
+    oneOf:
+      - items:
+          - const: microchip,pic64gx-pdma
+          - const: microchip,mpfs-pdma
+          - const: sifive,pdma0
+      - items:
+          - enum:
+              - microchip,mpfs-pdma
+              - sifive,fu540-c000-pdma
+          - const: sifive,pdma0
+    description:
+      Should be "sifive,<chip>-pdma" and "sifive,pdma<version>".
+      Supported compatible strings are -
+      "sifive,fu540-c000-pdma" for the SiFive PDMA v0 as integrated onto the
+      SiFive FU540 chip resp and "sifive,pdma0" for the SiFive PDMA v0 IP block
+      with no chip integration tweaks.
 
   reg:
     maxItems: 1
@@ -34,6 +51,12 @@ properties:
     minItems: 1
     maxItems: 8
 
+  dma-channels:
+    description: For backwards-compatibility, the default value is 4
+    minimum: 1
+    maximum: 4
+    default: 4
+
   '#dma-cells':
     const: 1
 
@@ -41,16 +64,16 @@ required:
   - compatible
   - reg
   - interrupts
-  - '#dma-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-    dma@3000000 {
-      compatible = "sifive,fu540-c000-pdma";
+    dma-controller@3000000 {
+      compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
       reg = <0x3000000 0x8000>;
-      interrupts = <23 24 25 26 27 28 29 30>;
+      dma-channels = <4>;
+      interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>;
       #dma-cells = <1>;
     };
 
diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
index 6b35089ac017..18c0a7c18bc8 100644
--- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -11,11 +11,16 @@ maintainers:
   - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
-    const: snps,dma-spear1340
+    oneOf:
+      - const: snps,dma-spear1340
+      - items:
+          - enum:
+              - renesas,r9a06g032-dma
+          - const: renesas,rzn1-dma
 
   "#dma-cells":
     minimum: 3
@@ -87,10 +92,10 @@ properties:
   data-width:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: Data bus width per each DMA master in bytes.
+    minItems: 1
+    maxItems: 4
     items:
-      maxItems: 4
-      items:
-        enum: [4, 8, 16, 32]
+      enum: [4, 8, 16, 32]
 
   data_width:
     $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -100,28 +105,28 @@ properties:
       deprecated. It' usage is discouraged in favor of data-width one. Moreover
       the property incorrectly permits to define data-bus width of 8 and 16
       bits, which is impossible in accordance with DW DMAC IP-core data book.
+    minItems: 1
+    maxItems: 4
     items:
-      maxItems: 4
-      items:
-        enum:
-          - 0 # 8 bits
-          - 1 # 16 bits
-          - 2 # 32 bits
-          - 3 # 64 bits
-          - 4 # 128 bits
-          - 5 # 256 bits
-        default: 0
+      enum:
+        - 0 # 8 bits
+        - 1 # 16 bits
+        - 2 # 32 bits
+        - 3 # 64 bits
+        - 4 # 128 bits
+        - 5 # 256 bits
+      default: 0
 
   multi-block:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       LLP-based multi-block transfer supported by hardware per
       each DMA channel.
+    minItems: 1
+    maxItems: 8
     items:
-      maxItems: 8
-      items:
-        enum: [0, 1]
-        default: 1
+      enum: [0, 1]
+      default: 1
 
   snps,max-burst-len:
     $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -132,11 +137,11 @@ properties:
       will be from 1 to max-burst-len words. It's an array property with one
       cell per channel in the units determined by the value set in the
       CTLx.SRC_TR_WIDTH/CTLx.DST_TR_WIDTH fields (data width).
+    minItems: 1
+    maxItems: 8
     items:
-      maxItems: 8
-      items:
-        enum: [4, 8, 16, 32, 64, 128, 256]
-        default: 256
+      enum: [4, 8, 16, 32, 64, 128, 256]
+      default: 256
 
   snps,dma-protection-control:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
index 79e241498e25..a393a33c8908 100644
--- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
@@ -8,19 +8,20 @@ title: Synopsys DesignWare AXI DMA Controller
 
 maintainers:
   - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
-  - Jee Heng Sia <jee.heng.sia@intel.com>
 
 description:
   Synopsys DesignWare AXI DMA Controller DT Binding
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
     enum:
       - snps,axi-dma-1.01a
       - intel,kmb-axi-dma
+      - starfive,jh7110-axi-dma
+      - starfive,jh8100-axi-dma
 
   reg:
     minItems: 1
@@ -34,6 +35,14 @@ properties:
       - const: axidma_apb_regs
 
   interrupts:
+    description:
+      If the IP-core synthesis parameter DMAX_INTR_IO_TYPE is set to 1, this
+      will be per-channel interrupts. Otherwise, this is a single combined IRQ
+      for all channels.
+    minItems: 1
+    maxItems: 8
+
+  iommus:
     maxItems: 1
 
   clocks:
@@ -53,6 +62,12 @@ properties:
     minimum: 1
     maximum: 8
 
+  dma-noncoherent: true
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
   snps,dma-masters:
     description: |
       Number of AXI masters supported by the hardware.
@@ -102,25 +117,44 @@ required:
   - snps,priority
   - snps,block-size
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - starfive,jh7110-axi-dma
+then:
+  properties:
+    resets:
+      minItems: 2
+      items:
+        - description: AXI reset line
+        - description: AHB reset line
+        - description: module reset
+else:
+  properties:
+    resets:
+      maxItems: 1
+
 additionalProperties: false
 
 examples:
   - |
-     #include <dt-bindings/interrupt-controller/arm-gic.h>
-     #include <dt-bindings/interrupt-controller/irq.h>
-     /* example with snps,dw-axi-dmac */
-     dmac: dma-controller@80000 {
-         compatible = "snps,axi-dma-1.01a";
-         reg = <0x80000 0x400>;
-         clocks = <&core_clk>, <&cfgr_clk>;
-         clock-names = "core-clk", "cfgr-clk";
-         interrupt-parent = <&intc>;
-         interrupts = <27>;
-         #dma-cells = <1>;
-         dma-channels = <4>;
-         snps,dma-masters = <2>;
-         snps,data-width = <3>;
-         snps,block-size = <4096 4096 4096 4096>;
-         snps,priority = <0 1 2 3>;
-         snps,axi-max-burst-len = <16>;
-     };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    /* example with snps,dw-axi-dmac */
+    dma-controller@80000 {
+        compatible = "snps,axi-dma-1.01a";
+        reg = <0x80000 0x400>;
+        clocks = <&core_clk>, <&cfgr_clk>;
+        clock-names = "core-clk", "cfgr-clk";
+        interrupt-parent = <&intc>;
+        interrupts = <27>;
+        #dma-cells = <1>;
+        dma-channels = <4>;
+        snps,dma-masters = <2>;
+        snps,data-width = <3>;
+        snps,block-size = <4096 4096 4096 4096>;
+        snps,priority = <0 1 2 3>;
+        snps,axi-max-burst-len = <16>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
index e7bf6dd7da29..23c8a7bf24de 100644
--- a/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
@@ -14,7 +14,7 @@ maintainers:
   - Masahiro Yamada <yamada.masahiro@socionext.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
index 371f18773198..da61d1ddc9c3 100644
--- a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
@@ -15,7 +15,7 @@ maintainers:
   - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/sophgo,cv1800b-dmamux.yaml b/Documentation/devicetree/bindings/dma/sophgo,cv1800b-dmamux.yaml
new file mode 100644
index 000000000000..011002942235
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sophgo,cv1800b-dmamux.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/sophgo,cv1800b-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800/SG200 Series DMA multiplexer
+
+maintainers:
+  - Inochi Amaoto <inochiama@gmail.com>
+
+description:
+  The DMA multiplexer of CV1800 is a subdevice of the system
+  controller. It support mapping 8 channels, but each channel
+  can be mapped only once.
+
+allOf:
+  - $ref: dma-router.yaml#
+
+properties:
+  compatible:
+    const: sophgo,cv1800b-dmamux
+
+  reg:
+    items:
+      - description: DMA channal remapping register
+      - description: DMA channel interrupt mapping register
+
+  '#dma-cells':
+    const: 2
+    description:
+      The first cells is device id. The second one is the cpu id.
+
+  dma-masters:
+    maxItems: 1
+
+required:
+  - reg
+  - '#dma-cells'
+  - dma-masters
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-router@154 {
+      compatible = "sophgo,cv1800b-dmamux";
+      reg = <0x154 0x8>, <0x298 0x4>;
+      #dma-cells = <2>;
+      dma-masters = <&dmac>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/spacemit,k1-pdma.yaml b/Documentation/devicetree/bindings/dma/spacemit,k1-pdma.yaml
new file mode 100644
index 000000000000..ec06235baf5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/spacemit,k1-pdma.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/spacemit,k1-pdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K1 PDMA Controller
+
+maintainers:
+  - Guodong Xu <guodong@riscstar.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    const: spacemit,k1-pdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Shared interrupt for all DMA channels
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dma-channels:
+    maximum: 16
+
+  '#dma-cells':
+    const: 1
+    description:
+      The DMA request number for the peripheral device.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - dma-channels
+  - '#dma-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/spacemit,k1-syscon.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dma-controller@d4000000 {
+            compatible = "spacemit,k1-pdma";
+            reg = <0x0 0xd4000000 0x0 0x4000>;
+            interrupts = <72>;
+            clocks = <&syscon_apmu CLK_DMA>;
+            resets = <&syscon_apmu RESET_DMA>;
+            dma-channels = <16>;
+            #dma-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/dma/sprd,sc9860-dma.yaml b/Documentation/devicetree/bindings/dma/sprd,sc9860-dma.yaml
new file mode 100644
index 000000000000..94647219c021
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sprd,sc9860-dma.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/sprd,sc9860-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC9860 DMA controller
+
+description: |
+  There are three DMA controllers: AP DMA, AON DMA and AGCP DMA. For AGCP
+  DMA controller, it can or do not request the IRQ, which will save
+  system power without resuming system by DMA interrupts if AGCP DMA
+  does not request the IRQ.
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    const: sprd,sc9860-dma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: DMA enable clock
+      - description: optional ashb_eb clock, only for the AGCP DMA controller
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: enable
+      - const: ashb_eb
+
+  '#dma-cells':
+    const: 1
+
+  dma-channels:
+    const: 32
+
+  '#dma-channels':
+    const: 32
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#dma-cells'
+  - dma-channels
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    /* AP DMA controller */
+    dma-controller@20100000 {
+      compatible = "sprd,sc9860-dma";
+      reg = <0x20100000 0x4000>;
+      interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&apahb_gate CLK_DMA_EB>;
+      clock-names = "enable";
+      #dma-cells = <1>;
+      dma-channels = <32>;
+    };
+
+    /* AGCP DMA controller */
+    dma-controller@41580000 {
+      compatible = "sprd,sc9860-dma";
+      reg = <0x41580000 0x4000>;
+      clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>,
+               <&agcp_gate CLK_AGCP_AP_ASHB_EB>;
+      clock-names = "enable", "ashb_eb";
+      #dma-cells = <1>;
+      dma-channels = <32>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt
deleted file mode 100644
index adccea9941f1..000000000000
--- a/Documentation/devicetree/bindings/dma/sprd-dma.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Spreadtrum DMA controller
-
-This binding follows the generic DMA bindings defined in dma.txt.
-
-Required properties:
-- compatible: Should be "sprd,sc9860-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain one interrupt shared by all channel.
-- #dma-cells: must be <1>. Used to represent the number of integer
-	cells in the dmas property of client device.
-- #dma-channels : Number of DMA channels supported. Should be 32.
-- clock-names: Should contain the clock of the DMA controller.
-- clocks: Should contain a clock specifier for each entry in clock-names.
-
-Example:
-
-Controller:
-apdma: dma-controller@20100000 {
-	compatible = "sprd,sc9860-dma";
-	reg = <0x20100000 0x4000>;
-	interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-	#dma-cells = <1>;
-	#dma-channels = <32>;
-	clock-names = "enable";
-	clocks = <&clk_ap_ahb_gates 5>;
-};
-
-
-Client:
-DMA clients connected to the Spreadtrum DMA controller must use the format
-described in the dma.txt file, using a two-cell specifier for each channel.
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. The slave id.
-
-spi0: spi@70a00000{
-	...
-	dma-names = "rx_chn", "tx_chn";
-	dmas = <&apdma 11>, <&apdma 12>;
-	...
-};
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
deleted file mode 100644
index f751796531c9..000000000000
--- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
+++ /dev/null
@@ -1,54 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/dma/st,stm32-dmamux.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: STMicroelectronics STM32 DMA MUX (DMA request router) bindings
-
-maintainers:
-  - Amelie Delaunay <amelie.delaunay@foss.st.com>
-
-allOf:
-  - $ref: "dma-router.yaml#"
-
-properties:
-  "#dma-cells":
-    const: 3
-
-  compatible:
-    const: st,stm32h7-dmamux
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    maxItems: 1
-
-  resets:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - dma-masters
-
-unevaluatedProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/clock/stm32mp1-clks.h>
-    #include <dt-bindings/reset/stm32mp1-resets.h>
-    dma-router@40020800 {
-      compatible = "st,stm32h7-dmamux";
-      reg = <0x40020800 0x3c>;
-      #dma-cells = <3>;
-      dma-requests = <128>;
-      dma-channels = <16>;
-      dma-masters = <&dma1 &dma2>;
-      clocks = <&timer_clk>;
-    };
-
-...
-
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
deleted file mode 100644
index 99ab5c4d331e..000000000000
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-* DMA40 DMA Controller
-
-Required properties:
-- compatible: "stericsson,dma40"
-- reg: Address range of the DMAC registers
-- reg-names: Names of the above areas to use during resource look-up
-- interrupt: Should contain the DMAC interrupt number
-- #dma-cells: must be <3>
-- memcpy-channels: Channels to be used for memcpy
-
-Optional properties:
-- dma-channels: Number of channels supported by hardware - if not present
-		the driver will attempt to obtain the information from H/W
-- disabled-channels: Channels which can not be used
-
-Example:
-
-	dma: dma-controller@801c0000 {
-		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
-		reg = <0x801C0000 0x1000  0x40010000 0x800>;
-		reg-names = "base", "lcpa";
-		interrupt-parent = <&intc>;
-		interrupts = <0 25 0x4>;
-
-		#dma-cells = <2>;
-		memcpy-channels  = <56 57 58 59 60>;
-		disabled-channels  = <12>;
-		dma-channels = <8>;
-	};
-
-Clients
-Required properties:
-- dmas: Comma separated list of dma channel requests
-- dma-names: Names of the aforementioned requested channels
-
-Each dmas request consists of 4 cells:
-  1. A phandle pointing to the DMA controller
-  2. Device signal number, the signal line for single and burst requests
-     connected from the device to the DMA40 engine
-  3. The DMA request line number (only when 'use fixed channel' is set)
-  4. A 32bit mask specifying; mode, direction and endianness
-     [NB: This list will grow]
-        0x00000001: Mode:
-                Logical channel when unset
-                Physical channel when set
-        0x00000002: Direction:
-                Memory to Device when unset
-                Device to Memory when set
-        0x00000004: Endianness:
-                Little endian when unset
-                Big endian when set
-        0x00000008: Use fixed channel:
-                Use automatic channel selection when unset
-                Use DMA request line number when set
-        0x00000010: Set channel as high priority:
-                Normal priority when unset
-                High priority when set
-
-Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are
-bidirectional, i.e. the same for RX and TX operations:
-
-0:  SPI controller 0
-1:  SD/MMC controller 0 (unused)
-2:  SD/MMC controller 1 (unused)
-3:  SD/MMC controller 2 (unused)
-4:  I2C port 1
-5:  I2C port 3
-6:  I2C port 2
-7:  I2C port 4
-8:  Synchronous Serial Port SSP0
-9:  Synchronous Serial Port SSP1
-10: Multi-Channel Display Engine MCDE RX
-11: UART port 2
-12: UART port 1
-13: UART port 0
-14: Multirate Serial Port MSP2
-15: I2C port 0
-16: USB OTG in/out endpoints 7 & 15
-17: USB OTG in/out endpoints 6 & 14
-18: USB OTG in/out endpoints 5 & 13
-19: USB OTG in/out endpoints 4 & 12
-20: SLIMbus or HSI channel 0
-21: SLIMbus or HSI channel 1
-22: SLIMbus or HSI channel 2
-23: SLIMbus or HSI channel 3
-24: Multimedia DSP SXA0
-25: Multimedia DSP SXA1
-26: Multimedia DSP SXA2
-27: Multimedia DSP SXA3
-28: SD/MM controller 2
-29: SD/MM controller 0
-30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
-31: MSP port 0 or SLIMbus channel 0
-32: SD/MM controller 1
-33: SPI controller 2
-34: i2c3 RX2 TX2
-35: SPI controller 1
-36: USB OTG in/out endpoints 3 & 11
-37: USB OTG in/out endpoints 2 & 10
-38: USB OTG in/out endpoints 1 & 9
-39: USB OTG in/out endpoints 8
-40: SPI controller 3
-41: SD/MM controller 3
-42: SD/MM controller 4
-43: SD/MM controller 5
-44: Multimedia DSP SXA4
-45: Multimedia DSP SXA5
-46: SLIMbus channel 8 or Multimedia DSP SXA6
-47: SLIMbus channel 9 or Multimedia DSP SXA7
-48: Crypto Accelerator 1
-49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
-50: Hash Accelerator 1 TX
-51: memcpy TX (to be used by the DMA driver for memcpy operations)
-52: SLIMbus or HSI channel 4
-53: SLIMbus or HSI channel 5
-54: SLIMbus or HSI channel 6
-55: SLIMbus or HSI channel 7
-56: memcpy (to be used by the DMA driver for memcpy operations)
-57: memcpy (to be used by the DMA driver for memcpy operations)
-58: memcpy (to be used by the DMA driver for memcpy operations)
-59: memcpy (to be used by the DMA driver for memcpy operations)
-60: memcpy (to be used by the DMA driver for memcpy operations)
-61: Crypto Accelerator 0
-62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
-63: Hash Accelerator 0 TX
-
-Example:
-
-	uart@80120000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0x80120000 0x1000>;
-		interrupts = <0 11 0x4>;
-
-		dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
-		       <&dma 13 0 0x0>; /* Logical - MemToDev */
-		dma-names = "rx", "rx";
-
-	};
diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
new file mode 100644
index 000000000000..8b42d9880400
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/stericsson,dma40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DMA40 DMA Engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 3
+    description: |
+      The first cell is the unique device channel number as indicated by this
+      table for DB8500 which is the only ASIC known to use DMA40:
+
+      0:  SPI controller 0
+      1:  SD/MMC controller 0 (unused)
+      2:  SD/MMC controller 1 (unused)
+      3:  SD/MMC controller 2 (unused)
+      4:  I2C port 1
+      5:  I2C port 3
+      6:  I2C port 2
+      7:  I2C port 4
+      8:  Synchronous Serial Port SSP0
+      9:  Synchronous Serial Port SSP1
+      10: Multi-Channel Display Engine MCDE RX
+      11: UART port 2
+      12: UART port 1
+      13: UART port 0
+      14: Multirate Serial Port MSP2
+      15: I2C port 0
+      16: USB OTG in/out endpoints 7 & 15
+      17: USB OTG in/out endpoints 6 & 14
+      18: USB OTG in/out endpoints 5 & 13
+      19: USB OTG in/out endpoints 4 & 12
+      20: SLIMbus or HSI channel 0
+      21: SLIMbus or HSI channel 1
+      22: SLIMbus or HSI channel 2
+      23: SLIMbus or HSI channel 3
+      24: Multimedia DSP SXA0
+      25: Multimedia DSP SXA1
+      26: Multimedia DSP SXA2
+      27: Multimedia DSP SXA3
+      28: SD/MMC controller 2
+      29: SD/MMC controller 0
+      30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
+      31: MSP port 0 or SLIMbus channel 0
+      32: SD/MMC controller 1
+      33: SPI controller 2
+      34: i2c3 RX2 TX2
+      35: SPI controller 1
+      36: USB OTG in/out endpoints 3 & 11
+      37: USB OTG in/out endpoints 2 & 10
+      38: USB OTG in/out endpoints 1 & 9
+      39: USB OTG in/out endpoints 8
+      40: SPI controller 3
+      41: SD/MMC controller 3
+      42: SD/MMC controller 4
+      43: SD/MMC controller 5
+      44: Multimedia DSP SXA4
+      45: Multimedia DSP SXA5
+      46: SLIMbus channel 8 or Multimedia DSP SXA6
+      47: SLIMbus channel 9 or Multimedia DSP SXA7
+      48: Crypto Accelerator 1
+      49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
+      50: Hash Accelerator 1 TX
+      51: memcpy TX (to be used by the DMA driver for memcpy operations)
+      52: SLIMbus or HSI channel 4
+      53: SLIMbus or HSI channel 5
+      54: SLIMbus or HSI channel 6
+      55: SLIMbus or HSI channel 7
+      56: memcpy (to be used by the DMA driver for memcpy operations)
+      57: memcpy (to be used by the DMA driver for memcpy operations)
+      58: memcpy (to be used by the DMA driver for memcpy operations)
+      59: memcpy (to be used by the DMA driver for memcpy operations)
+      60: memcpy (to be used by the DMA driver for memcpy operations)
+      61: Crypto Accelerator 0
+      62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
+      63: Hash Accelerator 0 TX
+
+      The second cell is the DMA request line number. This is only used when
+      a fixed channel is allocated, and indicated by setting bit 3 in the
+      flags field (see below).
+
+      The third cell is a 32bit flags bitfield with the following possible
+      bits set:
+      0x00000001 (bit 0) - mode:
+        Logical channel when unset
+        Physical channel when set
+      0x00000002 (bit 1) - direction:
+        Memory to Device when unset
+        Device to Memory when set
+      0x00000004 (bit 2) - endianness:
+        Little endian when unset
+        Big endian when set
+      0x00000008 (bit 3) - use fixed channel:
+        Use automatic channel selection when unset
+        Use DMA request line number when set
+      0x00000010 (bit 4) - set channel as high priority:
+        Normal priority when unset
+        High priority when set
+
+  compatible:
+    items:
+      - const: stericsson,db8500-dma40
+      - const: stericsson,dma40
+
+  reg:
+    oneOf:
+      - items:
+          - description: DMA40 memory base
+      - items:
+          - description: DMA40 memory base
+          - description: LCPA memory base, deprecated, use eSRAM pool instead
+        deprecated: true
+
+  reg-names:
+    oneOf:
+      - items:
+          - const: base
+      - items:
+          - const: base
+          - const: lcpa
+        deprecated: true
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A phandle array with inner size 1 (no arg cells).
+      First phandle is the LCPA (Logical Channel Parameter Address) memory.
+      Second phandle is the  LCLA (Logical Channel Link base Address) memory.
+    maxItems: 2
+    items:
+      maxItems: 1
+
+  memcpy-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of u32 elements indicating which channels on the DMA
+      engine are eligible for memcpy transfers
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - sram
+  - memcpy-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    dma-controller@801c0000 {
+        compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+        reg = <0x801c0000 0x1000>;
+        reg-names = "base";
+        sram = <&lcpa>, <&lcla>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <3>;
+        memcpy-channels = <56 57 58 59 60>;
+        clocks = <&prcmu_clk PRCMU_DMACLK>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml
index 55faab6a468e..598903354196 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml#
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 DMA Controller bindings
+title: STMicroelectronics STM32 DMA Controller
 
 description: |
   The STM32 DMA is a general-purpose direct memory access controller capable of
@@ -48,12 +48,11 @@ description: |
               by transfer completion. This must only be used on channels
               managing transfers for STM32 USART/UART.
 
-
 maintainers:
   - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: /schemas/dma/dma-controller.yaml#
 
 properties:
   "#dma-cells":
@@ -82,6 +81,10 @@ properties:
     description: if defined, it indicates that the controller
       supports memory-to-memory transfer
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml
new file mode 100644
index 000000000000..36f9fe860eb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma3.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dma3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DMA3 Controller
+
+description: |
+  The STM32 DMA3 is a direct memory access controller with different features
+  depending on its hardware configuration.
+  It is either called LPDMA (Low Power), GPDMA (General Purpose) or HPDMA (High
+  Performance).
+  Its hardware configuration registers allow to dynamically expose its features.
+
+  GPDMA and HPDMA support 16 independent DMA channels, while only 4 for LPDMA.
+  GPDMA and HPDMA support 256 DMA requests from peripherals, 8 for LPDMA.
+
+  Bindings are generic for these 3 STM32 DMA3 configurations.
+
+  DMA clients connected to the STM32 DMA3 controller must use the format
+  described in "#dma-cells" property description below, using a three-cell
+  specifier for each channel.
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+allOf:
+  - $ref: /schemas/dma/dma-controller.yaml#
+
+properties:
+  compatible:
+    const: st,stm32mp25-dma3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 4
+    maxItems: 16
+    description:
+      Should contain all of the per-channel DMA interrupts in ascending order
+      with respect to the DMA channel index.
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 3
+    description: |
+      Specifies the number of cells needed to provide DMA controller specific
+      information.
+      The first cell is the request line number.
+      The second cell is a 32-bit mask specifying the DMA channel requirements:
+        -bit 0-1: The priority level
+          0x0: low priority, low weight
+          0x1: low priority, mid weight
+          0x2: low priority, high weight
+          0x3: high priority
+        -bit 4-7: The FIFO requirement for queuing source/destination transfers
+          0x0: no FIFO requirement/any channel can fit
+          0x2: FIFO of 8 bytes (2^2+1)
+          0x4: FIFO of 32 bytes (2^4+1)
+          0x6: FIFO of 128 bytes (2^6+1)
+          0x7: FIFO of 256 bytes (2^7+1)
+      The third cell is a 32-bit mask specifying the DMA transfer requirements:
+        -bit 0: The source incrementing burst
+          0x0: fixed burst
+          0x1: contiguously incremented burst
+        -bit 1: The source allocated port
+          0x0: port 0 is allocated to the source transfer
+          0x1: port 1 is allocated to the source transfer
+        -bit 4: The destination incrementing burst
+          0x0: fixed burst
+          0x1: contiguously incremented burst
+        -bit 5: The destination allocated port
+          0x0: port 0 is allocated to the destination transfer
+          0x1: port 1 is allocated to the destination transfer
+        -bit 8: The type of hardware request
+          0x0: burst
+          0x1: block
+        -bit 9: The control mode
+          0x0: DMA controller control mode
+          0x1: peripheral control mode
+        -bit 12-13: The transfer complete event mode
+          0x0: at block level, transfer complete event is generated at the end
+               of a block
+          0x2: at LLI level, the transfer complete event is generated at the end
+               of the LLI transfer
+               including the update of the LLI if any
+          0x3: at channel level, the transfer complete event is generated at the
+               end of the last LLI
+        -bit 16: Prevent packing/unpacking mode
+          0x0: pack/unpack enabled when source data width/burst != destination data width/burst
+          0x1: memory data width/burst forced to peripheral data width/burst to prevent pack/unpack
+        -bit 17: Prevent additional transfers due to linked-list refactoring
+          0x0: don't prevent additional transfers for optimal performance
+          0x1: prevent additional transfer to accommodate user constraints such as single transfer
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - "#dma-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    dma-controller@40400000 {
+      compatible = "st,stm32mp25-dma3";
+      reg = <0x40400000 0x1000>;
+      interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&rcc CK_BUS_HPDMA1>;
+      #dma-cells = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dmamux.yaml
new file mode 100644
index 000000000000..b7bca1a83769
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dmamux.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DMA MUX (DMA request router)
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+allOf:
+  - $ref: /schemas/dma/dma-router.yaml#
+
+properties:
+  "#dma-cells":
+    const: 3
+    description: |
+      Each cell represents the following:
+      1. The mux input number/line for the request
+      2. Bitfield representing DMA channel configuration that is passed
+         to the real DMA controller
+      3. Bitfield representing device dependent DMA features passed to
+         the real DMA controller
+
+      For bitfield definitions of cells 2 and 3, see the associated
+      bindings doc for the actual DMA controller in st,stm32-dma.yaml.
+
+  compatible:
+    const: st,stm32h7-dmamux
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - dma-masters
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    dma-router@40020800 {
+      compatible = "st,stm32h7-dmamux";
+      reg = <0x40020800 0x3c>;
+      #dma-cells = <3>;
+      dma-requests = <128>;
+      dma-channels = <16>;
+      dma-masters = <&dma1>, <&dma2>;
+      clocks = <&timer_clk>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-mdma.yaml
index 87b4afd2cf62..45fe91db11db 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
+++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-mdma.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml#
+$id: http://devicetree.org/schemas/dma/stm32/st,stm32-mdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 MDMA Controller bindings
+title: STMicroelectronics STM32 MDMA Controller
 
 description: |
   The STM32 MDMA is a general-purpose direct memory access controller capable of
@@ -53,7 +53,7 @@ maintainers:
   - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: /schemas/dma/dma-controller.yaml#
 
 properties:
   "#dma-cells":
@@ -104,4 +104,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
index b849a1ed389d..1f9831540c97 100644
--- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
+++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
@@ -4,7 +4,7 @@ Required properties:
 - compatible:	"ti,dra7-dma-crossbar" for DRA7xx DMA crossbar
 		"ti,am335x-edma-crossbar" for AM335x and AM437x
 - reg:		Memory map for accessing module
-- #dma-cells:	Should be set to to match with the DMA controller's dma-cells
+- #dma-cells:	Should be set to match with the DMA controller's dma-cells
 		for ti,dra7-dma-crossbar and <3> for ti,am335x-edma-crossbar.
 - dma-requests:	Number of DMA requests the crossbar can receive
 - dma-masters:	phandle pointing to the DMA controller
@@ -20,7 +20,7 @@ Optional properties:
 		memcpy channels in eDMA.
 
 Notes:
-When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request
+When requesting channel via ti,dra7-dma-crossbar, the DMA client must request
 the DMA event number as crossbar ID (input to the DMA crossbar).
 
 For ti,am335x-edma-crossbar: the meaning of parameters of dmas for clients:
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
index df29d59d13a8..b5bc842c5a0e 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/dma/ti/k3-bcdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 DMSS BCDMA Device Tree Bindings
+title: Texas Instruments K3 DMSS BCDMA
 
 maintainers:
   - Peter Ujfalusi <peter.ujfalusi@gmail.com>
@@ -28,12 +28,21 @@ description: |
   PDMAs can be configured via BCDMA split channel's peer registers to match with
   the configuration of the legacy peripheral.
 
-allOf:
-  - $ref: /schemas/dma/dma-controller.yaml#
-
 properties:
   compatible:
-    const: ti,am64-dmss-bcdma
+    enum:
+      - ti,am62a-dmss-bcdma-csirx
+      - ti,am64-dmss-bcdma
+      - ti,j721s2-dmss-bcdma-csi
+      - ti,j722s-dmss-bcdma-csi
+
+  reg:
+    minItems: 3
+    maxItems: 9
+
+  reg-names:
+    minItems: 3
+    maxItems: 9
 
   "#dma-cells":
     const: 3
@@ -64,19 +73,13 @@ properties:
 
       cell 3: ASEL value for the channel
 
-  reg:
-    maxItems: 5
-
-  reg-names:
-    items:
-      - const: gcfg
-      - const: bchanrt
-      - const: rchanrt
-      - const: tchanrt
-      - const: ringrt
-
   msi-parent: true
 
+  power-domains:
+    description:
+      Power domain if available
+    maxItems: 1
+
   ti,asel:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: ASEL value for non slave channels
@@ -122,10 +125,102 @@ required:
   - msi-parent
   - ti,sci
   - ti,sci-dev-id
-  - ti,sci-rm-range-bchan
-  - ti,sci-rm-range-tchan
   - ti,sci-rm-range-rchan
 
+allOf:
+  - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am62a-dmss-bcdma-csirx
+    then:
+      properties:
+        ti,sci-rm-range-bchan: false
+        ti,sci-rm-range-tchan: false
+
+        reg:
+          items:
+            - description: BCDMA Control /Status Registers region
+            - description: RX Channel Realtime Registers region
+            - description: Ring Realtime Registers region
+
+        reg-names:
+          items:
+            - const: gcfg
+            - const: rchanrt
+            - const: ringrt
+
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-dmss-bcdma
+    then:
+      properties:
+        reg:
+          minItems: 5
+          items:
+            - description: BCDMA Control /Status Registers region
+            - description: Block Copy Channel Realtime Registers region
+            - description: RX Channel Realtime Registers region
+            - description: TX Channel Realtime Registers region
+            - description: Ring Realtime Registers region
+            - description: Ring Configuration Registers region
+            - description: TX Channel Configuration Registers region
+            - description: RX Channel Configuration Registers region
+            - description: Block Copy Channel Configuration Registers region
+
+        reg-names:
+          minItems: 5
+          items:
+            - const: gcfg
+            - const: bchanrt
+            - const: rchanrt
+            - const: tchanrt
+            - const: ringrt
+            - const: ring
+            - const: tchan
+            - const: rchan
+            - const: bchan
+
+      required:
+        - ti,sci-rm-range-bchan
+        - ti,sci-rm-range-tchan
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,j721s2-dmss-bcdma-csi
+              - ti,j722s-dmss-bcdma-csi
+    then:
+      properties:
+        ti,sci-rm-range-bchan: false
+
+        reg:
+          items:
+            - description: BCDMA Control /Status Registers region
+            - description: RX Channel Realtime Registers region
+            - description: TX Channel Realtime Registers region
+            - description: Ring Realtime Registers region
+
+        reg-names:
+          items:
+            - const: gcfg
+            - const: rchanrt
+            - const: tchanrt
+            - const: ringrt
+
+      required:
+        - ti,sci-rm-range-tchan
+
 unevaluatedProperties: false
 
 examples:
@@ -150,8 +245,13 @@ examples:
                       <0x0 0x4c000000 0x0 0x20000>,
                       <0x0 0x4a820000 0x0 0x20000>,
                       <0x0 0x4aa40000 0x0 0x20000>,
-                      <0x0 0x4bc00000 0x0 0x100000>;
-                reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+                      <0x0 0x4bc00000 0x0 0x100000>,
+                      <0x0 0x48600000 0x0 0x8000>,
+                      <0x0 0x484a4000 0x0 0x2000>,
+                      <0x0 0x484c2000 0x0 0x2000>,
+                      <0x0 0x48420000 0x0 0x2000>;
+                reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt",
+                            "ring", "tchan", "rchan", "bchan";
                 msi-parent = <&inta_main_dmss>;
                 #dma-cells = <3>;
 
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
index ea19d12a9337..11e064c02994 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/dma/ti/k3-pktdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 DMSS PKTDMA Device Tree Bindings
+title: Texas Instruments K3 DMSS PKTDMA
 
 maintainers:
   - Peter Ujfalusi <peter.ujfalusi@gmail.com>
@@ -25,6 +25,7 @@ description: |
 
 allOf:
   - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
 
 properties:
   compatible:
@@ -44,14 +45,28 @@ properties:
       The second cell is the ASEL value for the channel
 
   reg:
-    maxItems: 4
+    minItems: 4
+    items:
+      - description: Packet DMA Control /Status Registers region
+      - description: RX Channel Realtime Registers region
+      - description: TX Channel Realtime Registers region
+      - description: Ring Realtime Registers region
+      - description: Ring Configuration Registers region
+      - description: TX Configuration Registers region
+      - description: RX Configuration Registers region
+      - description: RX Flow Configuration Registers region
 
   reg-names:
+    minItems: 4
     items:
       - const: gcfg
       - const: rchanrt
       - const: tchanrt
       - const: ringrt
+      - const: ring
+      - const: tchan
+      - const: rchan
+      - const: rflow
 
   msi-parent: true
 
@@ -135,8 +150,14 @@ examples:
                 reg = <0x0 0x485c0000 0x0 0x100>,
                       <0x0 0x4a800000 0x0 0x20000>,
                       <0x0 0x4aa00000 0x0 0x40000>,
-                      <0x0 0x4b800000 0x0 0x400000>;
-                reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+                      <0x0 0x4b800000 0x0 0x400000>,
+                      <0x0 0x485e0000 0x0 0x20000>,
+                      <0x0 0x484a0000 0x0 0x4000>,
+                      <0x0 0x484c0000 0x0 0x2000>,
+                      <0x0 0x48430000 0x0 0x4000>;
+                reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt",
+                            "ring", "tchan", "rchan", "rflow";
+
                 msi-parent = <&inta_main_dmss>;
                 #dma-cells = <2>;
 
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
index 6a09bbf83d46..b18cf2bfdb5b 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings
+title: Texas Instruments K3 NAVSS Unified DMA
 
 maintainers:
   - Peter Ujfalusi <peter.ujfalusi@gmail.com>
@@ -43,7 +43,8 @@ description: |
   configuration of the legacy peripheral.
 
 allOf:
-  - $ref: "../dma-controller.yaml#"
+  - $ref: ../dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
 
 properties:
   "#dma-cells":
@@ -68,24 +69,27 @@ properties:
       - ti,j721e-navss-mcu-udmap
 
   reg:
-    maxItems: 3
+    minItems: 3
+    items:
+      - description: UDMA-P Control /Status Registers region
+      - description: RX Channel Realtime Registers region
+      - description: TX Channel Realtime Registers region
+      - description: TX Configuration Registers region
+      - description: RX Configuration Registers region
+      - description: RX Flow Configuration Registers region
 
   reg-names:
+    minItems: 3
     items:
       - const: gcfg
       - const: rchanrt
       - const: tchanrt
+      - const: tchan
+      - const: rchan
+      - const: rflow
 
   msi-parent: true
 
-  ti,sci:
-    description: phandle to TI-SCI compatible System controller node
-    $ref: /schemas/types.yaml#/definitions/phandle
-
-  ti,sci-dev-id:
-    description: TI-SCI device id of UDMAP
-    $ref: /schemas/types.yaml#/definitions/uint32
-
   ti,ringacc:
     description: phandle to the ring accelerator node
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -165,8 +169,11 @@ examples:
                 compatible = "ti,am654-navss-main-udmap";
                 reg = <0x0 0x31150000 0x0 0x100>,
                       <0x0 0x34000000 0x0 0x100000>,
-                      <0x0 0x35000000 0x0 0x100000>;
-                reg-names = "gcfg", "rchanrt", "tchanrt";
+                      <0x0 0x35000000 0x0 0x100000>,
+                      <0x0 0x30b00000 0x0 0x20000>,
+                      <0x0 0x30c00000 0x0 0x8000>,
+                      <0x0 0x30d00000 0x0 0x4000>;
+                reg-names = "gcfg", "rchanrt", "tchanrt", "tchan", "rchan", "rflow";
                 #dma-cells = <1>;
 
                 ti,ringacc = <&ringacc>;
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index 325aca52cd43..b567107270cb 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -49,6 +49,12 @@ Optional properties for AXI DMA and MCDMA:
 	register as configured in h/w. Takes values {8...26}. If the property
 	is missing or invalid then the default value 23 is used. This is the
 	maximum value that is supported by all IP versions.
+
+Optional properties for AXI DMA:
+- xlnx,axistream-connected: Tells whether DMA is connected to AXI stream IP.
+- xlnx,irq-delay: Tells the interrupt delay timeout value. Valid range is from
+	0-255. Setting this value to zero disables the delay timer interrupt.
+	1 timeout interval = 125 * clock period of SG clock.
 Optional properties for VDMA:
 - xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
 	It takes following values:
@@ -103,22 +109,3 @@ axi_vdma_0: axivdma@40030000 {
 		xlnx,datawidth = <0x40>;
 	} ;
 } ;
-
-
-* DMA client
-
-Required properties:
-- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
-	where Channel ID is '0' for write/tx and '1' for read/rx
-	channel.
-- dma-names: a list of DMA channel names, one per "dmas" entry
-
-Example:
-++++++++
-
-vdmatest_0: vdmatest@0 {
-	compatible ="xlnx,axi-vdma-test-1.00.a";
-	dmas = <&axi_vdma_0 0
-		&axi_vdma_0 1>;
-	dma-names = "vdma0", "vdma1";
-} ;
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
new file mode 100644
index 000000000000..2da86037ad79
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DMA Engine
+
+description: |
+  The Xilinx ZynqMP DMA engine supports memory to memory transfers,
+  memory to device and device to memory transfers. It also has flow
+  control and rate control support for slave/peripheral dma access.
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+  - Harini Katakam <harini.katakam@amd.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
+
+allOf:
+  - $ref: ../dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - amd,versal2-dma-1.0
+      - xlnx,zynqmp-dma-1.0
+
+  reg:
+    description: memory map for gdma/adma module access
+    maxItems: 1
+
+  interrupts:
+    description: DMA channel interrupt
+    maxItems: 1
+
+  clocks:
+    description: input clocks
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_main
+      - const: clk_apb
+
+  xlnx,bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 64
+      - 128
+    description: AXI bus width in bits
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - xlnx,bus-width
+
+additionalProperties: false
+
+examples:
+  - |
+
+    fpd_dma_chan1: dma-controller@fd500000 {
+      compatible = "xlnx,zynqmp-dma-1.0";
+      reg = <0xfd500000 0x1000>;
+      interrupt-parent = <&gic>;
+      interrupts = <0 117 0x4>;
+      #dma-cells = <1>;
+      clock-names = "clk_main", "clk_apb";
+      clocks = <&zynqmp_clk 19>, <&zynqmp_clk 31>;
+      xlnx,bus-width = <128>;
+      dma-coherent;
+    };
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
index 2a595b18ff6c..2128f4645c98 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dpdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx ZynqMP DisplayPort DMA Controller Device Tree Bindings
+title: Xilinx ZynqMP DisplayPort DMA Controller
 
 description: |
   These bindings describe the DMA engine included in the Xilinx ZynqMP
@@ -16,7 +16,7 @@ maintainers:
   - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
 allOf:
-  - $ref: "../dma-controller.yaml#"
+  - $ref: ../dma-controller.yaml#
 
 properties:
   "#dma-cells":
@@ -41,6 +41,9 @@ properties:
   clock-names:
     const: axi_clk
 
+  power-domains:
+    maxItems: 1
+
 required:
   - "#dma-cells"
   - compatible
@@ -48,12 +51,14 @@ required:
   - interrupts
   - clocks
   - clock-names
+  - power-domains
 
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
 
     dma: dma-controller@fd4c0000 {
       compatible = "xlnx,zynqmp-dpdma";
@@ -63,6 +68,7 @@ examples:
       clocks = <&dpdma_clk>;
       clock-names = "axi_clk";
       #dma-cells = <1>;
+      power-domains = <&zynqmp_firmware PD_DP>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
deleted file mode 100644
index 07a5a7aa9ea0..000000000000
--- a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
-memory to device and device to memory transfers. It also has flow
-control and rate control support for slave/peripheral dma access.
-
-Required properties:
-- compatible		: Should be "xlnx,zynqmp-dma-1.0"
-- reg			: Memory map for gdma/adma module access.
-- interrupts		: Should contain DMA channel interrupt.
-- xlnx,bus-width	: Axi buswidth in bits. Should contain 128 or 64
-- clock-names		: List of input clocks "clk_main", "clk_apb"
-			  (see clock bindings for details)
-
-Optional properties:
-- dma-coherent		: Present if dma operations are coherent.
-
-Example:
-++++++++
-fpd_dma_chan1: dma@fd500000 {
-	compatible = "xlnx,zynqmp-dma-1.0";
-	reg = <0x0 0xFD500000 0x1000>;
-	interrupt-parent = <&gic>;
-	interrupts = <0 117 4>;
-	clock-names = "clk_main", "clk_apb";
-	xlnx,bus-width = <128>;
-	dma-coherent;
-};
diff --git a/Documentation/devicetree/bindings/dpll/dpll-device.yaml b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
new file mode 100644
index 000000000000..fb8d7a9a3693
--- /dev/null
+++ b/Documentation/devicetree/bindings/dpll/dpll-device.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Phase-Locked Loop (DPLL) Device
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description:
+  Digital Phase-Locked Loop (DPLL) device is used for precise clock
+  synchronization in networking and telecom hardware. The device can
+  have one or more channels (DPLLs) and one or more physical input and
+  output pins. Each DPLL channel can either produce pulse-per-clock signal
+  or drive ethernet equipment clock. The type of each channel can be
+  indicated by dpll-types property.
+
+properties:
+  $nodename:
+    pattern: "^dpll(@.*)?$"
+
+  "#address-cells":
+    const: 0
+
+  "#size-cells":
+    const: 0
+
+  dpll-types:
+    description: List of DPLL channel types, one per DPLL instance.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum: [pps, eec]
+
+  input-pins:
+    type: object
+    description: DPLL input pins
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^pin@[0-9a-f]+$":
+        $ref: /schemas/dpll/dpll-pin.yaml
+        unevaluatedProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+  output-pins:
+    type: object
+    description: DPLL output pins
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^pin@[0-9]+$":
+        $ref: /schemas/dpll/dpll-pin.yaml
+        unevaluatedProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/dpll/dpll-pin.yaml b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml
new file mode 100644
index 000000000000..51db93b77306
--- /dev/null
+++ b/Documentation/devicetree/bindings/dpll/dpll-pin.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-pin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DPLL Pin
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description: |
+  The DPLL pin is either a physical input or output pin that is provided
+  by a DPLL( Digital Phase-Locked Loop) device. The pin is identified by
+  its physical order number that is stored in reg property and can have
+  an additional set of properties like supported (allowed) frequencies,
+  label, type and may support embedded sync.
+
+  Note that the pin in this context has nothing to do with pinctrl.
+
+properties:
+  reg:
+    description: Hardware index of the DPLL pin.
+    maxItems: 1
+
+  connection-type:
+    description: Connection type of the pin
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ext, gnss, int, mux, synce]
+
+  esync-control:
+    description: Indicates whether the pin supports embedded sync functionality.
+    type: boolean
+
+  label:
+    description: String exposed as the pin board label
+    $ref: /schemas/types.yaml#/definitions/string
+
+  supported-frequencies-hz:
+    description: List of supported frequencies for this pin, expressed in Hz.
+
+required:
+  - reg
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml b/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml
new file mode 100644
index 000000000000..17747f754b84
--- /dev/null
+++ b/Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/microchip,zl30731.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Azurite DPLL device
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description:
+  Microchip Azurite DPLL (ZL3073x) is a family of DPLL devices that
+  provides up to 5 independent DPLL channels, up to 10 differential or
+  single-ended inputs and 10 differential or 20 single-ended outputs.
+  These devices support both I2C and SPI interfaces.
+
+properties:
+  compatible:
+    enum:
+      - microchip,zl30731
+      - microchip,zl30732
+      - microchip,zl30733
+      - microchip,zl30734
+      - microchip,zl30735
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/dpll/dpll-device.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dpll@70 {
+        compatible = "microchip,zl30732";
+        reg = <0x70>;
+        dpll-types = "pps", "eec";
+
+        input-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@0 { /* REF0P */
+            reg = <0>;
+            connection-type = "ext";
+            label = "Input 0";
+            supported-frequencies-hz = /bits/ 64 <1 1000>;
+          };
+        };
+
+        output-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@3 { /* OUT1N */
+            reg = <3>;
+            connection-type = "gnss";
+            esync-control;
+            label = "Output 1";
+            supported-frequencies-hz = /bits/ 64 <1 10000>;
+          };
+        };
+      };
+    };
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dpll@70 {
+        compatible = "microchip,zl30731";
+        reg = <0x70>;
+        spi-max-frequency = <12500000>;
+
+        dpll-types = "pps";
+
+        input-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@0 { /* REF0P */
+            reg = <0>;
+            connection-type = "ext";
+            label = "Input 0";
+            supported-frequencies-hz = /bits/ 64 <1 1000>;
+          };
+        };
+
+        output-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@3 { /* OUT1N */
+            reg = <3>;
+            connection-type = "gnss";
+            esync-control;
+            label = "Output 1";
+            supported-frequencies-hz = /bits/ 64 <1 10000>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
index e66ef2da7879..e610b7636a08 100644
--- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -20,6 +20,7 @@ properties:
       - fsl,imx8qxp-dsp
       - fsl,imx8qm-dsp
       - fsl,imx8mp-dsp
+      - fsl,imx8ulp-dsp
       - fsl,imx8qxp-hifi4
       - fsl,imx8qm-hifi4
       - fsl,imx8mp-hifi4
@@ -81,6 +82,18 @@ properties:
     description:
       Phandle to syscon block which provide access for processor enablement
 
+  resets:
+    minItems: 1
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: runstall
+      - const: softreset
+
+  access-controllers:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -98,14 +111,35 @@ allOf:
           contains:
             enum:
               - fsl,imx8qxp-dsp
-              - fsl,imx8qm-dsp
               - fsl,imx8qxp-hifi4
+    then:
+      properties:
+        power-domains:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-dsp
               - fsl,imx8qm-hifi4
     then:
       properties:
         power-domains:
           minItems: 4
-    else:
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mp-dsp
+              - fsl,imx8mp-hifi4
+              - fsl,imx8ulp-dsp
+              - fsl,imx8ulp-hifi4
+    then:
       properties:
         power-domains:
           maxItems: 1
@@ -142,6 +176,17 @@ allOf:
             - const: txdb1
             - const: rxdb0
             - const: rxdb1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mp-dsp
+              - fsl,imx8mp-hifi4
+    then:
+      required:
+        - resets
+        - reset-names
 
 additionalProperties: false
 
@@ -156,16 +201,15 @@ examples:
                  <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>,
                  <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>;
         clock-names = "ipg", "ocram", "core";
-        power-domains = <&pd IMX_SC_R_MU_13A>,
-                        <&pd IMX_SC_R_MU_13B>,
-                        <&pd IMX_SC_R_DSP>,
-                        <&pd IMX_SC_R_DSP_RAM>;
+        power-domains = <&pd IMX_SC_R_MU_13B>,
+                        <&pd IMX_SC_R_MU_2A>;
         mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
         mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>;
         memory-region = <&dsp_reserved>;
     };
   - |
     #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/reset/imx8mp-reset-audiomix.h>
     dsp_reserved: dsp@92400000 {
       reg = <0x92400000 0x1000000>;
       no-map;
@@ -200,5 +244,6 @@ examples:
                <&mu2 3 0>;
       memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
                       <&dsp_vdev0vring1>, <&dsp_reserved>;
-      fsl,dsp-ctrl = <&audio_blk_ctrl>;
+      resets = <&audio_blk_ctrl IMX8MP_AUDIOMIX_DSP_RUNSTALL>;
+      reset-names = "runstall";
     };
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
new file mode 100644
index 000000000000..88575da1e6d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mt8186 DSP core
+
+maintainers:
+  - Tinghan Shen <tinghan.shen@mediatek.com>
+
+description: |
+  MediaTek mt8186 SoC contains a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8186-dsp
+      - mediatek,mt8188-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP config registers
+      - description: Address and size of the DSP SRAM
+      - description: Address and size of the DSP secure registers
+      - description: Address and size of the DSP bus registers
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+      - const: sec
+      - const: bus
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: mux for audio dsp local bus
+
+  clock-names:
+    items:
+      - const: audiodsp
+      - const: adsp_bus
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    dsp@10680000 {
+        compatible = "mediatek,mt8186-dsp";
+        reg = <0x10680000 0x2000>,
+              <0x10800000 0x100000>,
+              <0x1068b000 0x100>,
+              <0x1068f000 0x1000>;
+        reg-names = "cfg", "sram", "sec", "bus";
+        clocks = <&topckgen CLK_TOP_AUDIODSP>,
+                 <&topckgen CLK_TOP_ADSP_BUS>;
+        clock-names = "audiodsp",
+                      "adsp_bus";
+        power-domains = <&spm 6>;
+        mbox-names = "rx", "tx";
+        mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
new file mode 100644
index 000000000000..abc52978be7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8195-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek mt8195 DSP core
+
+maintainers:
+  - YC Hung <yc.hung@mediatek.com>
+
+description: |
+  Some boards from mt8195 contain a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP Cfg registers
+      - description: Address and size of the DSP SRAM
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: 26M clock
+      - description: mux for audio dsp local bus
+      - description: default audio dsp local bus clock source
+      - description: clock gate for audio dsp clock
+      - description: mux for audio dsp access external bus
+
+  clock-names:
+    items:
+      - const: adsp_sel
+      - const: clk26m_ck
+      - const: audio_local_bus
+      - const: mainpll_d7_d2
+      - const: scp_adsp_audiodsp
+      - const: audio_h
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - memory-region
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dsp@10803000 {
+        compatible =  "mediatek,mt8195-dsp";
+        reg = <0x10803000 0x1000>,
+              <0x10840000 0x40000>;
+        reg-names = "cfg", "sram";
+        clocks = <&topckgen 10>, //CLK_TOP_ADSP
+                 <&clk26m>,
+                 <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS
+                 <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2
+                 <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP
+                 <&topckgen 34>; //CLK_TOP_AUDIO_H
+        clock-names = "adsp_sel",
+                      "clk26m_ck",
+                      "audio_local_bus",
+                      "mainpll_d7_d2",
+                      "scp_adsp_audiodsp",
+                      "audio_h";
+        memory-region = <&adsp_dma_mem_reserved>,
+                        <&adsp_mem_reserved>;
+        power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP
+        mbox-names = "rx", "tx";
+        mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dts-coding-style.rst b/Documentation/devicetree/bindings/dts-coding-style.rst
new file mode 100644
index 000000000000..4a02ea60cbbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/dts-coding-style.rst
@@ -0,0 +1,213 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Devicetree Sources (DTS) Coding Style
+=====================================
+
+When writing Devicetree Sources (DTS) please observe below guidelines.  They
+should be considered complementary to any rules expressed already in
+the Devicetree Specification and the dtc compiler (including W=1 and W=2
+builds).
+
+Individual architectures and subarchitectures can define additional rules,
+making the coding style stricter.
+
+Naming and Valid Characters
+---------------------------
+
+The Devicetree Specification allows a broad range of characters in node
+and property names, but this coding style narrows the range down to achieve
+better code readability.
+
+1. Node and property names can use only the following characters:
+
+   * Lowercase characters: [a-z]
+   * Digits: [0-9]
+   * Dash: -
+
+2. Labels can use only the following characters:
+
+   * Lowercase characters: [a-z]
+   * Digits: [0-9]
+   * Underscore: _
+
+3. Unless a bus defines differently, unit addresses shall use lowercase
+   hexadecimal digits, without leading zeros (padding).
+
+4. Hex values in properties, e.g. "reg", shall use lowercase hex.  The address
+   part can be padded with leading zeros.
+
+Example::
+
+	gpi_dma2: dma-controller@a00000 {
+		compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
+		reg = <0x0 0x00a00000 0x0 0x60000>;
+	}
+
+Order of Nodes
+--------------
+
+1. Nodes on any bus, thus using unit addresses for children, shall be
+   ordered by unit address in ascending order.
+   Alternatively for some subarchitectures, nodes of the same type can be
+   grouped together, e.g. all I2C controllers one after another even if this
+   breaks unit address ordering.
+
+2. Nodes without unit addresses shall be ordered alpha-numerically by the node
+   name.  For a few node types, they can be ordered by the main property, e.g.
+   pin configuration states ordered by value of "pins" property.
+
+3. When extending nodes in the board DTS via &label, the entries shall be
+   ordered either alpha-numerically or by keeping the order from DTSI, where
+   the choice depends on the subarchitecture.
+
+The above-described ordering rules are easy to enforce during review, reduce
+chances of conflicts for simultaneous additions of new nodes to a file and help
+in navigating through the DTS source.
+
+Example::
+
+	/* SoC DTSI */
+
+	/ {
+		cpus {
+			/* ... */
+		};
+
+		psci {
+			/* ... */
+		};
+
+		soc@0 {
+			dma: dma-controller@10000 {
+				/* ... */
+			};
+
+			clk: clock-controller@80000 {
+				/* ... */
+			};
+		};
+	};
+
+	/* Board DTS - alphabetical order */
+
+	&clk {
+		/* ... */
+	};
+
+	&dma {
+		/* ... */
+	};
+
+	/* Board DTS - alternative order, keep as DTSI */
+
+	&dma {
+		/* ... */
+	};
+
+	&clk {
+		/* ... */
+	};
+
+Order of Properties in Device Node
+----------------------------------
+
+The following order of properties in device nodes is preferred:
+
+1. "compatible"
+2. "reg"
+3. "ranges"
+4. Standard/common properties (defined by common bindings, e.g. without
+   vendor-prefixes)
+5. Vendor-specific properties
+6. "status" (if applicable), preceded by a blank line if there is content
+   before the property
+7. Child nodes, where each node is preceded with a blank line
+
+The "status" property is by default "okay", thus it can be omitted.
+
+The above-described ordering follows this approach:
+
+1. Most important properties start the node: compatible then bus addressing to
+   match unit address.
+2. Each node will have common properties in similar place.
+3. Status is the last information to annotate that device node is or is not
+   finished (board resources are needed).
+
+The individual properties inside each group shall use natural sort order by
+the property name.
+
+Example::
+
+	/* SoC DTSI */
+
+	device_node: device-class@6789abc {
+		compatible = "vendor,device";
+		reg = <0x0 0x06789abc 0x0 0xa123>;
+		ranges = <0x0 0x0 0x06789abc 0x1000>;
+		#dma-cells = <1>;
+		clocks = <&clock_controller 0>, <&clock_controller 1>;
+		clock-names = "bus", "host";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		vendor,custom-property = <2>;
+
+		status = "disabled";
+
+		child_node: child-class@100 {
+			reg = <0x100 0x200>;
+			/* ... */
+		};
+	};
+
+	/* Board DTS */
+
+	&device_node {
+		vdd-0v9-supply = <&board_vreg1>;
+		vdd-1v8-supply = <&board_vreg4>;
+		vdd-3v3-supply = <&board_vreg2>;
+		vdd-12v-supply = <&board_vreg3>;
+
+		status = "okay";
+	}
+
+Indentation and wrapping
+------------------------
+
+1. Use indentation and wrap lines according to
+   Documentation/process/coding-style.rst.
+2. Each entry in arrays with multiple cells, e.g. "reg" with two IO addresses,
+   shall be enclosed in <>.
+3. For arrays spanning across lines, it is preferred to split on item boundary
+   and align the continued entries with opening < from the first line.
+   Usually avoid splitting individual items unless they significantly exceed
+   line wrap limit.
+
+Example::
+
+	thermal-sensor@c271000 {
+		compatible = "qcom,sm8550-tsens", "qcom,tsens-v2";
+		reg = <0x0 0x0c271000 0x0 0x1000>,
+		      <0x0 0x0c222000 0x0 0x1000>;
+		/* Lines exceeding coding style line wrap limit: */
+		interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+	};
+
+Organizing DTSI and DTS
+-----------------------
+
+The DTSI and DTS files shall be organized in a way representing the common,
+reusable parts of hardware.  Typically, this means organizing DTSI and DTS files
+into several files:
+
+1. DTSI with contents of the entire SoC, without nodes for hardware not present
+   on the SoC.
+2. If applicable: DTSI with common or re-usable parts of the hardware, e.g.
+   entire System-on-Module.
+3. DTS representing the board.
+
+Hardware components that are present on the board shall be placed in the
+board DTS, not in the SoC or SoM DTSI.  A partial exception is a common
+external reference SoC input clock, which could be coded as a fixed-clock in
+the SoC DTSI with its frequency provided by each board DTS.
diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
index c8b91207f34d..cc930660b794 100644
--- a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
+++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
@@ -42,8 +42,7 @@ properties:
     enum: [ 0, 1 ]
 
   performance-domains:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     description:
       A phandle and performance domain specifier as defined by bindings of the
       performance controller/provider specified by phandle.
@@ -52,10 +51,16 @@ additionalProperties: true
 
 examples:
   - |
-    performance: performance-controller@12340000 {
-        compatible = "qcom,cpufreq-hw";
-        reg = <0x12340000 0x1000>;
-        #performance-domain-cells = <1>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        performance: performance-controller@11bc00 {
+            compatible = "mediatek,cpufreq-hw";
+            reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+
+            #performance-domain-cells = <1>;
+        };
     };
 
     // The node above defines a performance controller that is a performance
diff --git a/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
new file mode 100644
index 000000000000..136e8fccd429
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml
@@ -0,0 +1,324 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2025 Altera Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/altr,socfpga-ecc-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SoCFPGA ECC Manager
+
+maintainers:
+  - Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
+
+description:
+  This binding describes the device tree nodes required for the Altera SoCFPGA
+  ECC Manager for the Cyclone5, Arria5, Arria10, Stratix10, and Agilex chip
+  families.
+
+properties:
+
+  compatible:
+    oneOf:
+      - items:
+          - const: altr,socfpga-s10-ecc-manager
+          - const: altr,socfpga-a10-ecc-manager
+      - const: altr,socfpga-a10-ecc-manager
+      - const: altr,socfpga-ecc-manager
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  ranges: true
+
+  altr,sysmgr-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to Stratix10 System Manager Block with the ECC manager registers
+
+  sdramedac:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - altr,sdram-edac
+          - altr,sdram-edac-a10
+          - altr,sdram-edac-s10
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      altr,sdr-syscon:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to SDRAM parent
+
+    required:
+      - compatible
+      - interrupts
+      - altr,sdr-syscon
+
+patternProperties:
+  "^ocram-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: altr,socfpga-s10-ocram-ecc
+              - const: altr,socfpga-a10-ocram-ecc
+          - const: altr,socfpga-a10-ocram-ecc
+          - const: altr,socfpga-ocram-ecc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      iram:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to OCRAM parent
+
+      altr,ecc-parent:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to OCRAM parent
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+
+  "^usb[0-9]-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: altr,socfpga-s10-usb-ecc
+              - const: altr,socfpga-usb-ecc
+          - const: altr,socfpga-usb-ecc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      altr,ecc-parent:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to USB parent
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - altr,ecc-parent
+
+  "^emac[0-9]-[t,r]x-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: altr,socfpga-s10-eth-mac-ecc
+              - const: altr,socfpga-eth-mac-ecc
+          - const: altr,socfpga-eth-mac-ecc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      altr,ecc-parent:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to ethernet parent
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - altr,ecc-parent
+
+  "^sdmmc[a-f]-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: altr,socfpga-s10-sdmmc-ecc
+              - const: altr,socfpga-sdmmc-ecc
+          - const: altr,socfpga-sdmmc-ecc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        minItems: 2
+        maxItems: 4
+
+      altr,ecc-parent:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to SD/MMC parent
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - altr,ecc-parent
+
+  "^l2-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - altr,socfpga-a10-l2-ecc
+          - altr,socfpga-l2-ecc
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 2
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+
+  "^dma-ecc@[a-f0-9]+$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: altr,socfpga-dma-ecc
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 2
+
+      altr,ecc-parent:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to SD/MMC parent
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - altr,ecc-parent
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: altr,socfpga-ecc-manager
+then:
+  required:
+    - compatible
+    - "#address-cells"
+    - "#size-cells"
+    - ranges
+
+else:
+  required:
+    - compatible
+    - "#address-cells"
+    - "#size-cells"
+    - interrupts
+    - interrupt-controller
+    - "#interrupt-cells"
+    - ranges
+    - altr,sysmgr-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    eccmgr {
+        compatible = "altr,socfpga-s10-ecc-manager",
+                     "altr,socfpga-a10-ecc-manager";
+        altr,sysmgr-syscon = <&sysmgr>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        ranges;
+
+        sdramedac {
+            compatible = "altr,sdram-edac-s10";
+            altr,sdr-syscon = <&sdr>;
+            interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        ocram-ecc@ff8cc000 {
+            compatible = "altr,socfpga-s10-ocram-ecc",
+                         "altr,socfpga-a10-ocram-ecc";
+            reg = <0xff8cc000 0x100>;
+            altr,ecc-parent = <&ocram>;
+            interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        usb0-ecc@ff8c4000 {
+            compatible = "altr,socfpga-s10-usb-ecc",
+                         "altr,socfpga-usb-ecc";
+            reg = <0xff8c4000 0x100>;
+            altr,ecc-parent = <&usb0>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        emac0-rx-ecc@ff8c0000 {
+            compatible = "altr,socfpga-s10-eth-mac-ecc",
+                         "altr,socfpga-eth-mac-ecc";
+            reg = <0xff8c0000 0x100>;
+            altr,ecc-parent = <&gmac0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        emac0-tx-ecc@ff8c0400 {
+            compatible = "altr,socfpga-s10-eth-mac-ecc",
+                         "altr,socfpga-eth-mac-ecc";
+            reg = <0xff8c0400 0x100>;
+            altr,ecc-parent = <&gmac0>;
+            interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        sdmmca-ecc@ff8c8c00 {
+            compatible = "altr,socfpga-s10-sdmmc-ecc",
+                         "altr,socfpga-sdmmc-ecc";
+            reg = <0xff8c8c00 0x100>;
+            altr,ecc-parent = <&mmc>;
+            interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+                         <15 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml
new file mode 100644
index 000000000000..9637df7af3c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/apm,xgene-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SoC EDAC
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+description: >
+  EDAC node is defined to describe on-chip error detection and correction.
+
+  The following error types are supported:
+
+    memory controller  - Memory controller
+    PMD (L1/L2)        - Processor module unit (PMD) L1/L2 cache
+    L3                 - L3 cache controller
+    SoC                - SoC IPs such as Ethernet, SATA, etc
+
+properties:
+  compatible:
+    const: apm,xgene-edac
+
+  reg:
+    items:
+      - description: CPU bus (PCP) resource
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+  ranges: true
+
+  interrupts:
+    description: Interrupt-specifier for MCU, PMD, L3, or SoC error IRQ(s).
+    items:
+      - description: MCU error IRQ
+      - description: PMD error IRQ
+      - description: L3 error IRQ
+      - description: SoC error IRQ
+    minItems: 1
+
+  regmap-csw:
+    description: Regmap of the CPU switch fabric (CSW) resource.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  regmap-mcba:
+    description: Regmap of the MCB-A (memory bridge) resource.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  regmap-mcbb:
+    description: Regmap of the MCB-B (memory bridge) resource.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  regmap-efuse:
+    description: Regmap of the PMD efuse resource.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  regmap-rb:
+    description: Regmap of the register bus resource (optional for compatibility).
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - regmap-csw
+  - regmap-mcba
+  - regmap-mcbb
+  - regmap-efuse
+  - reg
+  - interrupts
+
+# Child-node bindings
+patternProperties:
+  '^edacmc@':
+    description: Memory controller subnode
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: apm,xgene-edac-mc
+
+      reg:
+        maxItems: 1
+
+      memory-controller:
+        description: Instance number of the memory controller.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 3
+
+    required:
+      - compatible
+      - reg
+      - memory-controller
+
+  '^edacpmd@':
+    description: PMD subnode
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: apm,xgene-edac-pmd
+
+      reg:
+        maxItems: 1
+
+      pmd-controller:
+        description: Instance number of the PMD controller.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 3
+
+    required:
+      - compatible
+      - reg
+      - pmd-controller
+
+  '^edacl3@':
+    description: L3 subnode
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - apm,xgene-edac-l3
+          - apm,xgene-edac-l3-v2
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+  '^edacsoc@':
+    description: SoC subnode
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - apm,xgene-edac-soc
+          - apm,xgene-edac-soc-v1
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        edac@78800000 {
+            compatible = "apm,xgene-edac";
+            reg = <0x0 0x78800000 0x0 0x100>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+            interrupts = <0x0 0x20 0x4>, <0x0 0x21 0x4>, <0x0 0x27 0x4>;
+
+            regmap-csw = <&csw>;
+            regmap-mcba = <&mcba>;
+            regmap-mcbb = <&mcbb>;
+            regmap-efuse = <&efuse>;
+            regmap-rb = <&rb>;
+
+            edacmc@7e800000 {
+                compatible = "apm,xgene-edac-mc";
+                reg = <0x0 0x7e800000 0x0 0x1000>;
+                memory-controller = <0>;
+            };
+
+            edacpmd@7c000000 {
+                compatible = "apm,xgene-edac-pmd";
+                reg = <0x0 0x7c000000 0x0 0x200000>;
+                pmd-controller = <0>;
+            };
+
+            edacl3@7e600000 {
+                compatible = "apm,xgene-edac-l3";
+                reg = <0x0 0x7e600000 0x0 0x1000>;
+            };
+
+            edacsoc@7e930000 {
+                compatible = "apm,xgene-edac-soc-v1";
+                reg = <0x0 0x7e930000 0x0 0x1000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
deleted file mode 100644
index 1006b0489464..000000000000
--- a/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-* APM X-Gene SoC EDAC node
-
-EDAC node is defined to describe on-chip error detection and correction.
-The follow error types are supported:
-
-  memory controller	- Memory controller
-  PMD (L1/L2)		- Processor module unit (PMD) L1/L2 cache
-  L3			- L3 cache controller
-  SoC			- SoC IP's such as Ethernet, SATA, and etc
-
-The following section describes the EDAC DT node binding.
-
-Required properties:
-- compatible		: Shall be "apm,xgene-edac".
-- regmap-csw		: Regmap of the CPU switch fabric (CSW) resource.
-- regmap-mcba		: Regmap of the MCB-A (memory bridge) resource.
-- regmap-mcbb		: Regmap of the MCB-B (memory bridge) resource.
-- regmap-efuse		: Regmap of the PMD efuse resource.
-- regmap-rb		: Regmap of the register bus resource. This property
-			  is optional only for compatibility. If the RB
-			  error conditions are not cleared, it will
-			  continuously generate interrupt.
-- reg			: First resource shall be the CPU bus (PCP) resource.
-- interrupts            : Interrupt-specifier for MCU, PMD, L3, or SoC error
-			  IRQ(s).
-
-Required properties for memory controller subnode:
-- compatible		: Shall be "apm,xgene-edac-mc".
-- reg			: First resource shall be the memory controller unit
-                          (MCU) resource.
-- memory-controller	: Instance number of the memory controller.
-
-Required properties for PMD subnode:
-- compatible		: Shall be "apm,xgene-edac-pmd" or
-                          "apm,xgene-edac-pmd-v2".
-- reg			: First resource shall be the PMD resource.
-- pmd-controller	: Instance number of the PMD controller.
-
-Required properties for L3 subnode:
-- compatible		: Shall be "apm,xgene-edac-l3" or
-                          "apm,xgene-edac-l3-v2".
-- reg			: First resource shall be the L3 EDAC resource.
-
-Required properties for SoC subnode:
-- compatible		: Shall be "apm,xgene-edac-soc-v1" for revision 1 or
-                          "apm,xgene-edac-l3-soc" for general value reporting
-                          only.
-- reg			: First resource shall be the SoC EDAC resource.
-
-Example:
-	csw: csw@7e200000 {
-		compatible = "apm,xgene-csw", "syscon";
-		reg = <0x0 0x7e200000 0x0 0x1000>;
-	};
-
-	mcba: mcba@7e700000 {
-		compatible = "apm,xgene-mcb", "syscon";
-		reg = <0x0 0x7e700000 0x0 0x1000>;
-	};
-
-	mcbb: mcbb@7e720000 {
-		compatible = "apm,xgene-mcb", "syscon";
-		reg = <0x0 0x7e720000 0x0 0x1000>;
-	};
-
-	efuse: efuse@1054a000 {
-		compatible = "apm,xgene-efuse", "syscon";
-		reg = <0x0 0x1054a000 0x0 0x20>;
-	};
-
-	rb: rb@7e000000 {
-		compatible = "apm,xgene-rb", "syscon";
-		reg = <0x0 0x7e000000 0x0 0x10>;
-	};
-
-	edac@78800000 {
-		compatible = "apm,xgene-edac";
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		regmap-csw = <&csw>;
-		regmap-mcba = <&mcba>;
-		regmap-mcbb = <&mcbb>;
-		regmap-efuse = <&efuse>;
-		regmap-rb = <&rb>;
-		reg = <0x0 0x78800000 0x0 0x100>;
-		interrupts = <0x0 0x20 0x4>,
-			     <0x0 0x21 0x4>,
-			     <0x0 0x27 0x4>;
-
-		edacmc@7e800000 {
-			compatible = "apm,xgene-edac-mc";
-			reg = <0x0 0x7e800000 0x0 0x1000>;
-			memory-controller = <0>;
-		};
-
-		edacpmd@7c000000 {
-			compatible = "apm,xgene-edac-pmd";
-			reg = <0x0 0x7c000000 0x0 0x200000>;
-			pmd-controller = <0>;
-		};
-
-		edacl3@7e600000 {
-			compatible = "apm,xgene-edac-l3";
-			reg = <0x0 0x7e600000 0x0 0x1000>;
-		};
-
-		edacsoc@7e930000 {
-			compatible = "apm,xgene-edac-soc-v1";
-			reg = <0x0 0x7e930000 0x0 0x1000>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/edac/aspeed,ast2400-sdram-edac.yaml b/Documentation/devicetree/bindings/edac/aspeed,ast2400-sdram-edac.yaml
new file mode 100644
index 000000000000..09735826d707
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/aspeed,ast2400-sdram-edac.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/edac/aspeed,ast2400-sdram-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed BMC SoC SDRAM EDAC controller
+
+maintainers:
+  - Stefan Schaeckeler <sschaeck@cisco.com>
+
+description: >
+  The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error
+  correction check).
+
+  The memory controller supports SECDED (single bit error correction, double bit
+  error detection) and single bit error auto scrubbing by reserving 8 bits for
+  every 64 bit word (effectively reducing available memory to 8/9).
+
+  Note, the bootloader must configure ECC mode in the memory controller.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-sdram-edac
+      - aspeed,ast2500-sdram-edac
+      - aspeed,ast2600-sdram-edac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    sdram@1e6e0000 {
+        compatible = "aspeed,ast2500-sdram-edac";
+        reg = <0x1e6e0000 0x174>;
+        interrupts = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt b/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
deleted file mode 100644
index 8ca9e0a049d8..000000000000
--- a/Documentation/devicetree/bindings/edac/aspeed-sdram-edac.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Aspeed BMC SoC EDAC node
-
-The Aspeed BMC SoC supports DDR3 and DDR4 memory with and without ECC (error
-correction check).
-
-The memory controller supports SECDED (single bit error correction, double bit
-error detection) and single bit error auto scrubbing by reserving 8 bits for
-every 64 bit word (effectively reducing available memory to 8/9).
-
-Note, the bootloader must configure ECC mode in the memory controller.
-
-
-Required properties:
-- compatible: should be one of
-	- "aspeed,ast2400-sdram-edac"
-	- "aspeed,ast2500-sdram-edac"
-	- "aspeed,ast2600-sdram-edac"
-- reg:        sdram controller register set should be <0x1e6e0000 0x174>
-- interrupts: should be AVIC interrupt #0
-
-
-Example:
-
-	edac: sdram@1e6e0000 {
-		compatible = "aspeed,ast2500-sdram-edac";
-		reg = <0x1e6e0000 0x174>;
-		interrupts = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml
index 3b6842e92d1b..84db3966662a 100644
--- a/Documentation/devicetree/bindings/edac/dmc-520.yaml
+++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/edac/dmc-520.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM DMC-520 EDAC bindings
+title: ARM DMC-520 EDAC
 
 maintainers:
   - Lei Wang <lewan@microsoft.com>
diff --git a/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
deleted file mode 100644
index 8f52206cfd2a..000000000000
--- a/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
+++ /dev/null
@@ -1,383 +0,0 @@
-Altera SoCFPGA ECC Manager
-This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
-The ECC Manager counts and corrects single bit errors and counts/handles
-double bit errors which are uncorrectable.
-
-Cyclone5 and Arria5 ECC Manager
-Required Properties:
-- compatible : Should be "altr,socfpga-ecc-manager"
-- #address-cells: must be 1
-- #size-cells: must be 1
-- ranges : standard definition, should translate from local addresses
-
-Subcomponents:
-
-L2 Cache ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-l2-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt. Note the rising edge type.
-
-On Chip RAM ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-ocram-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- iram : phandle to On-Chip RAM definition.
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt. Note the rising edge type.
-
-Example:
-
-	eccmgr: eccmgr@ffd08140 {
-		compatible = "altr,socfpga-ecc-manager";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		l2-ecc@ffd08140 {
-			compatible = "altr,socfpga-l2-ecc";
-			reg = <0xffd08140 0x4>;
-			interrupts = <0 36 1>, <0 37 1>;
-		};
-
-		ocram-ecc@ffd08144 {
-			compatible = "altr,socfpga-ocram-ecc";
-			reg = <0xffd08144 0x4>;
-			iram = <&ocram>;
-			interrupts = <0 178 1>, <0 179 1>;
-		};
-	};
-
-Arria10 SoCFPGA ECC Manager
-The Arria10 SoC ECC Manager handles the IRQs for each peripheral
-in a shared register instead of individual IRQs like the Cyclone5
-and Arria5. Therefore the device tree is different as well.
-
-Required Properties:
-- compatible : Should be "altr,socfpga-a10-ecc-manager"
-- altr,sysgr-syscon : phandle to Arria10 System Manager Block
-	containing the ECC manager registers.
-- #address-cells: must be 1
-- #size-cells: must be 1
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt.
-- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
-- #interrupt-cells : must be set to 2.
-- ranges : standard definition, should translate from local addresses
-
-Subcomponents:
-
-L2 Cache ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-a10-l2-ecc"
-- reg : Address and size for ECC error interrupt clear registers.
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-On-Chip RAM ECC
-Required Properties:
-- compatible : Should be "altr,socfpga-a10-ocram-ecc"
-- reg        : Address and size for ECC block registers.
-- interrupts : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-Ethernet FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-eth-mac-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent Ethernet node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-NAND FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-nand-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent NAND node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-DMA FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-dma-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent DMA node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-USB FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-usb-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent USB node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-QSPI FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-qspi-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent QSPI node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order.
-
-SDMMC FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-sdmmc-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent SD/MMC node.
-- interrupts      : Should be single bit error interrupt, then double bit error
-	interrupt, in this order for port A, and then single bit error interrupt,
-	then double bit error interrupt in this order for port B.
-
-Example:
-
-	eccmgr: eccmgr@ffd06000 {
-		compatible = "altr,socfpga-a10-ecc-manager";
-		altr,sysmgr-syscon = <&sysmgr>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 0 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ranges;
-
-		l2-ecc@ffd06010 {
-			compatible = "altr,socfpga-a10-l2-ecc";
-			reg = <0xffd06010 0x4>;
-			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
-				     <32 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		ocram-ecc@ff8c3000 {
-			compatible = "altr,socfpga-a10-ocram-ecc";
-			reg = <0xff8c3000 0x90>;
-			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
-				     <33 IRQ_TYPE_LEVEL_HIGH> ;
-		};
-
-		emac0-rx-ecc@ff8c0800 {
-			compatible = "altr,socfpga-eth-mac-ecc";
-			reg = <0xff8c0800 0x400>;
-			altr,ecc-parent = <&gmac0>;
-			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
-				     <36 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		emac0-tx-ecc@ff8c0c00 {
-			compatible = "altr,socfpga-eth-mac-ecc";
-			reg = <0xff8c0c00 0x400>;
-			altr,ecc-parent = <&gmac0>;
-			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
-				     <37 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		nand-buf-ecc@ff8c2000 {
-			compatible = "altr,socfpga-nand-ecc";
-			reg = <0xff8c2000 0x400>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>,
-				     <43 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		nand-rd-ecc@ff8c2400 {
-			compatible = "altr,socfpga-nand-ecc";
-			reg = <0xff8c2400 0x400>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>,
-				     <45 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		nand-wr-ecc@ff8c2800 {
-			compatible = "altr,socfpga-nand-ecc";
-			reg = <0xff8c2800 0x400>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
-				     <44 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		dma-ecc@ff8c8000 {
-			compatible = "altr,socfpga-dma-ecc";
-			reg = <0xff8c8000 0x400>;
-			altr,ecc-parent = <&pdma>;
-			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
-				     <42 IRQ_TYPE_LEVEL_HIGH>;
-
-		usb0-ecc@ff8c8800 {
-			compatible = "altr,socfpga-usb-ecc";
-			reg = <0xff8c8800 0x400>;
-			altr,ecc-parent = <&usb0>;
-			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
-				     <34 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		qspi-ecc@ff8c8400 {
-			compatible = "altr,socfpga-qspi-ecc";
-			reg = <0xff8c8400 0x400>;
-			altr,ecc-parent = <&qspi>;
-			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
-				     <46 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sdmmc-ecc@ff8c2c00 {
-			compatible = "altr,socfpga-sdmmc-ecc";
-			reg = <0xff8c2c00 0x400>;
-			altr,ecc-parent = <&mmc>;
-			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
-				     <47 IRQ_TYPE_LEVEL_HIGH>,
-				     <16 IRQ_TYPE_LEVEL_HIGH>,
-				     <48 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-Stratix10 SoCFPGA ECC Manager (ARM64)
-The Stratix10 SoC ECC Manager handles the IRQs for each peripheral
-in a shared register similar to the Arria10. However, Stratix10 ECC
-requires access to registers that can only be read from Secure Monitor
-with SMC calls. Therefore the device tree is slightly different. Note
-that only 1 interrupt is sent in Stratix10 because the double bit errors
-are treated as SErrors in ARM64 instead of IRQs in ARM32.
-
-Required Properties:
-- compatible : Should be "altr,socfpga-s10-ecc-manager"
-- altr,sysgr-syscon : phandle to Stratix10 System Manager Block
-	              containing the ECC manager registers.
-- interrupts : Should be single bit error interrupt.
-- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
-- #interrupt-cells : must be set to 2.
-- #address-cells: must be 1
-- #size-cells: must be 1
-- ranges : standard definition, should translate from local addresses
-
-Subcomponents:
-
-SDRAM ECC
-Required Properties:
-- compatible : Should be "altr,sdram-edac-s10"
-- interrupts : Should be single bit error interrupt.
-
-On-Chip RAM ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-ocram-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent OCRAM node.
-- interrupts      : Should be single bit error interrupt.
-
-Ethernet FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-eth-mac-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent Ethernet node.
-- interrupts      : Should be single bit error interrupt.
-
-NAND FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-nand-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent NAND node.
-- interrupts      : Should be single bit error interrupt.
-
-DMA FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-dma-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent DMA node.
-- interrupts      : Should be single bit error interrupt.
-
-USB FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-usb-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent USB node.
-- interrupts      : Should be single bit error interrupt.
-
-SDMMC FIFO ECC
-Required Properties:
-- compatible      : Should be "altr,socfpga-s10-sdmmc-ecc"
-- reg             : Address and size for ECC block registers.
-- altr,ecc-parent : phandle to parent SD/MMC node.
-- interrupts      : Should be single bit error interrupt for port A
-		    and then single bit error interrupt for port B.
-
-Example:
-
-	eccmgr {
-		compatible = "altr,socfpga-s10-ecc-manager";
-		altr,sysmgr-syscon = <&sysmgr>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <0 15 4>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		ranges;
-
-		sdramedac {
-			compatible = "altr,sdram-edac-s10";
-			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		ocram-ecc@ff8cc000 {
-			compatible = "altr,socfpga-s10-ocram-ecc";
-			reg = <ff8cc000 0x100>;
-			altr,ecc-parent = <&ocram>;
-			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		emac0-rx-ecc@ff8c0000 {
-			compatible = "altr,socfpga-s10-eth-mac-ecc";
-			reg = <0xff8c0000 0x100>;
-			altr,ecc-parent = <&gmac0>;
-			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		emac0-tx-ecc@ff8c0400 {
-			compatible = "altr,socfpga-s10-eth-mac-ecc";
-			reg = <0xff8c0400 0x100>;
-			altr,ecc-parent = <&gmac0>;
-			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>'
-		};
-
-		nand-buf-ecc@ff8c8000 {
-			compatible = "altr,socfpga-s10-nand-ecc";
-			reg = <0xff8c8000 0x100>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		nand-rd-ecc@ff8c8400 {
-			compatible = "altr,socfpga-s10-nand-ecc";
-			reg = <0xff8c8400 0x100>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		nand-wr-ecc@ff8c8800 {
-			compatible = "altr,socfpga-s10-nand-ecc";
-			reg = <0xff8c8800 0x100>;
-			altr,ecc-parent = <&nand>;
-			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		dma-ecc@ff8c9000 {
-			compatible = "altr,socfpga-s10-dma-ecc";
-			reg = <0xff8c9000 0x100>;
-			altr,ecc-parent = <&pdma>;
-			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-
-		usb0-ecc@ff8c4000 {
-			compatible = "altr,socfpga-s10-usb-ecc";
-			reg = <0xff8c4000 0x100>;
-			altr,ecc-parent = <&usb0>;
-			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sdmmc-ecc@ff8c8c00 {
-			compatible = "altr,socfpga-s10-sdmmc-ecc";
-			reg = <0xff8c8c00 0x100>;
-			altr,ecc-parent = <&mmc>;
-			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
-				     <15 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
deleted file mode 100644
index c94acbb8cb0c..000000000000
--- a/Documentation/devicetree/bindings/eeprom/at24.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to at24.yaml.
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index 4c5396a9744f..c21282634780 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -2,19 +2,25 @@
 # Copyright 2019 BayLibre SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/eeprom/at24.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/eeprom/at24.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: I2C EEPROMs compatible with Atmel's AT24
 
 maintainers:
   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
 
+allOf:
+  - $ref: /schemas/nvmem/nvmem.yaml
+  - $ref: /schemas/nvmem/nvmem-deprecated-cells.yaml
+
 select:
   properties:
     compatible:
       contains:
-        pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+        anyOf:
+          - pattern: "^atmel,(24(c|cs|mac)[0-9]+|spd)$"
+          - enum: ["microchip,24aa025e48", "microchip,24aa025e64"]
   required:
     - compatible
 
@@ -87,6 +93,10 @@ properties:
               - items:
                   pattern: cs1024$
               - items:
+                  pattern: c1025$
+              - items:
+                  pattern: cs1025$
+              - items:
                   pattern: c2048$
               - items:
                   pattern: cs2048$
@@ -95,32 +105,55 @@ properties:
       # These are special cases that don't conform to the above pattern.
       # Each requires a standard at24 model as fallback.
       - items:
-          - const: nxp,se97b
-          - const: atmel,24c02
+          - enum:
+              - rohm,br24g01
+              - rohm,br24t01
+          - const: atmel,24c01
       - items:
-          - const: onnn,cat24c04
-          - const: atmel,24c04
+          - enum:
+              - nxp,se97b
+              - renesas,r1ex24002
+          - const: atmel,24c02
       - items:
-          - const: onnn,cat24c05
+          - enum:
+              - giantec,gt24c04a
+              - onnn,cat24c04
+              - onnn,cat24c05
+              - rohm,br24g04
           - const: atmel,24c04
       - items:
-          - const: renesas,r1ex24002
-          - const: atmel,24c02
-      - items:
-          - const: renesas,r1ex24016
+          - enum:
+              - belling,bl24c16a
+              - renesas,r1ex24016
           - const: atmel,24c16
       - items:
           - const: giantec,gt24c32a
           - const: atmel,24c32
       - items:
-          - const: renesas,r1ex24128
+          - enum:
+              - belling,bl24s64
+              - onnn,n24s64b
+              - puya,p24c64f
+          - const: atmel,24c64
+      - items:
+          - enum:
+              - giantec,gt24p128e
+              - giantec,gt24p128f
+              - renesas,r1ex24128
+              - samsung,s524ad0xd1
           - const: atmel,24c128
       - items:
-          - const: rohm,br24g01
-          - const: atmel,24c01
+          - enum:
+              - giantec,gt24c256c
+              - puya,p24c256c
+          - const: atmel,24c256
       - items:
-          - const: rohm,br24t01
-          - const: atmel,24c01
+          - const: microchip,24aa025e48
+      - items:
+          - const: microchip,24aa025e64
+      - items:
+          - const: st,24256e-wl
+      - pattern: '^atmel,24c(32|64)d-wl$' # Actual vendor is st
 
   label:
     description: Descriptive name of the EEPROM.
@@ -180,7 +213,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
index fbf99e346966..e1599ce10916 100644
--- a/Documentation/devicetree/bindings/eeprom/at25.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/eeprom/at25.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/eeprom/at25.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: SPI EEPROMs or FRAMs compatible with Atmel's AT25
 
@@ -25,14 +25,17 @@ properties:
     oneOf:
       - items:
           - enum:
+              - anvo,anv32c81w
               - anvo,anv32e61w
               - atmel,at25256B
               - fujitsu,mb85rs1mt
+              - fujitsu,mb85rs256
               - fujitsu,mb85rs64
               - microchip,at25160bn
               - microchip,25lc040
               - st,m95m02
               - st,m95256
+              - st,m95640
               - cypress,fm25
 
           - const: atmel,at25
@@ -44,8 +47,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   pagesize:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072]
@@ -56,6 +57,7 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Total eeprom size in bytes.
+      Also used for FRAMs without device ID where the size cannot be detected.
 
   address-width:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -105,6 +107,8 @@ required:
   - spi-max-frequency
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml
   - if:
       properties:
         compatible:
@@ -117,12 +121,12 @@ allOf:
         - size
         - address-width
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -144,4 +148,11 @@ examples:
             reg = <1>;
             spi-max-frequency = <40000000>;
         };
+
+        fram@2 {
+            compatible = "cypress,fm25", "atmel,at25";
+            reg = <2>;
+            spi-max-frequency = <20000000>;
+            size = <2048>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml b/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml
new file mode 100644
index 000000000000..144e86ce5c0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/eeprom/microchip,93lc46b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip 93xx46 SPI compatible EEPROM family
+
+maintainers:
+  - Cory Tusar <cory.tusar@pid1solutions.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,at93c46
+      - atmel,at93c46d
+      - atmel,at93c56
+      - atmel,at93c66
+      - eeprom-93xx46
+      - microchip,93lc46b
+
+  data-size:
+    description: number of data bits per word
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+
+  reg:
+    description: chip select of EEPROM
+    maxItems: 1
+
+  read-only:
+    description:
+      parameter-less property which disables writes to the EEPROM
+    type: boolean
+
+  select-gpios:
+    description:
+      specifies the GPIO that needs to be asserted prior to each access
+      of EEPROM (e.g. for SPI bus multiplexing)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - data-size
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      eeprom@0 {
+        compatible = "eeprom-93xx46";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cs-high;
+        data-size = <8>;
+        select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/eeprom/st,m24lr.yaml b/Documentation/devicetree/bindings/eeprom/st,m24lr.yaml
new file mode 100644
index 000000000000..0a0820e9d11f
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/st,m24lr.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/eeprom/st,m24lr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics M24LR NFC/RFID EEPROM
+
+maintainers:
+  - Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
+
+description:
+  STMicroelectronics M24LR series are dual-interface (RF + I2C)
+  EEPROM chips. These devices support I2C-based access to both
+  memory and a system area that controls authentication and configuration.
+  They expose two I2C addresses, one for the system parameter sector and
+  one for the EEPROM.
+
+allOf:
+  - $ref: /schemas/nvmem/nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,m24lr04e-r
+      - st,m24lr16e-r
+      - st,m24lr64e-r
+
+  reg:
+    items:
+      - description: I2C address used for control/system registers
+      - description: I2C address used for EEPROM memory access
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      eeprom@57 {
+        compatible = "st,m24lr04e-r";
+        reg = <0x57>, /* primary-device */
+              <0x53>; /* secondary-device */
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/embedded-controller/acer,aspire1-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/acer,aspire1-ec.yaml
new file mode 100644
index 000000000000..01ee61768527
--- /dev/null
+++ b/Documentation/devicetree/bindings/embedded-controller/acer,aspire1-ec.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/embedded-controller/acer,aspire1-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Acer Aspire 1 Embedded Controller
+
+maintainers:
+  - Nikita Travkin <nikita@trvn.ru>
+
+description:
+  The Acer Aspire 1 laptop uses an embedded controller to control battery
+  and charging as well as to provide a set of misc features such as the
+  laptop lid status and HPD events for the USB Type-C DP alt mode.
+
+properties:
+  compatible:
+    const: acer,aspire1-ec
+
+  reg:
+    const: 0x76
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        embedded-controller@76 {
+            compatible = "acer,aspire1-ec";
+            reg = <0x76>;
+
+            interrupts-extended = <&tlmm 30 IRQ_TYPE_LEVEL_LOW>;
+
+            connector {
+                compatible = "usb-c-connector";
+
+                port {
+                    ec_dp_in: endpoint {
+                        remote-endpoint = <&mdss_dp_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/embedded-controller/google,cros-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/google,cros-ec.yaml
new file mode 100644
index 000000000000..3ab5737c9a8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/embedded-controller/google,cros-ec.yaml
@@ -0,0 +1,326 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/embedded-controller/google,cros-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS Embedded Controller
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Guenter Roeck <groeck@chromium.org>
+
+description:
+  Google's ChromeOS EC is a microcontroller which talks to the AP and
+  implements various functions such as keyboard and battery charging.
+  The EC can be connected through various interfaces (I2C, SPI, and others)
+  and the compatible string specifies which interface is being used.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          For implementations of the EC connected through I2C.
+        const: google,cros-ec-i2c
+      - description:
+          For implementations of the EC connected through SPI.
+        const: google,cros-ec-spi
+      - description:
+          For implementations of the FPMCU connected through SPI.
+        items:
+          - const: google,cros-ec-fp
+          - const: google,cros-ec-spi
+      - description:
+          For implementations of the EC connected through RPMSG.
+        const: google,cros-ec-rpmsg
+      - description:
+          For implementations of the EC connected through UART.
+        const: google,cros-ec-uart
+
+  controller-data: true
+
+  google,cros-ec-spi-pre-delay:
+    description:
+      This property specifies the delay in usecs between the
+      assertion of the CS and the first clock pulse.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  google,cros-ec-spi-msg-delay:
+    description:
+      This property specifies the delay in usecs between messages.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  google,has-vbc-nvram:
+    description:
+      Some implementations of the EC include a small nvram space used to
+      store verified boot context data. This boolean flag is used to specify
+      whether this nvram is present or not.
+    type: boolean
+
+  mediatek,rpmsg-name:
+    description:
+      Must be defined if the cros-ec is a rpmsg device for a Mediatek
+      ARM Cortex M4 Co-processor. Contains the name of the rpmsg
+      device. Used to match the subnode to the rpmsg device announced by
+      the SCP.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  spi-max-frequency: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  boot0-gpios:
+    maxItems: 1
+    description: Assert for bootloader mode.
+
+  vdd-supply: true
+
+  wakeup-source:
+    description: Button can wake-up the system.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  typec:
+    $ref: /schemas/chrome/google,cros-ec-typec.yaml#
+
+  ec-pwm:
+    $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
+    deprecated: true
+
+  pwm:
+    $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
+
+  keyboard-controller:
+    $ref: /schemas/input/google,cros-ec-keyb.yaml#
+
+  proximity:
+    $ref: /schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
+
+  codecs:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 2
+
+      '#size-cells':
+        const: 1
+
+    patternProperties:
+      "^ec-codec@[a-f0-9]+$":
+        type: object
+        $ref: /schemas/sound/google,cros-ec-codec.yaml#
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+  cbas:
+    type: object
+
+    description:
+      This device is used to signal when a detachable base is attached
+      to a Chrome OS tablet. This device cannot be detected at runtime.
+
+    properties:
+      compatible:
+        const: google,cros-cbas
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+patternProperties:
+  "^i2c-tunnel[0-9]*$":
+    type: object
+    $ref: /schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
+
+  "^regulator@[0-9]+$":
+    type: object
+    $ref: /schemas/regulator/google,cros-ec-regulator.yaml#
+
+  "^extcon[0-9]*$":
+    type: object
+    $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml#
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: google,cros-ec-spi
+    then:
+      properties:
+        controller-data: false
+        google,cros-ec-spi-pre-delay: false
+        google,cros-ec-spi-msg-delay: false
+        spi-max-frequency: false
+    else:
+      $ref: /schemas/spi/spi-peripheral-props.yaml
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: google,cros-ec-rpmsg
+    then:
+      properties:
+        mediatek,rpmsg-name: false
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - google,cros-ec-rpmsg
+                - google,cros-ec-uart
+    then:
+      required:
+        - reg
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,cros-ec-fp
+    then:
+      properties:
+        '#address-cells': false
+        '#size-cells': false
+        typec: false
+        ec-pwm: false
+        kbd-led-backlight: false
+        keyboard-controller: false
+        proximity: false
+        codecs: false
+        cbas: false
+
+      patternProperties:
+        "^i2c-tunnel[0-9]*$": false
+        "^regulator@[0-9]+$": false
+        "^extcon[0-9]*$": false
+
+      # Using additionalProperties: false here and
+      # listing true properties doesn't work
+
+      required:
+        - reset-gpios
+        - boot0-gpios
+        - vdd-supply
+    else:
+      properties:
+        reset-gpios: false
+        boot0-gpios: false
+        vdd-supply: false
+
+additionalProperties: false
+
+examples:
+  # Example for I2C
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@1e {
+            compatible = "google,cros-ec-i2c";
+            reg = <0x1e>;
+            interrupts = <6 0>;
+            interrupt-parent = <&gpio0>;
+        };
+    };
+
+  # Example for SPI
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0x0>;
+            google,cros-ec-spi-msg-delay = <30>;
+            google,cros-ec-spi-pre-delay = <10>;
+            interrupts = <99 0>;
+            interrupt-parent = <&gpio7>;
+            spi-max-frequency = <5000000>;
+            #gpio-cells = <2>;
+            gpio-controller;
+
+            proximity {
+                compatible = "google,cros-ec-mkbp-proximity";
+            };
+
+            cbas {
+                compatible = "google,cros-cbas";
+            };
+        };
+    };
+
+  # Example for RPMSG
+  - |
+    scp0 {
+        cros-ec {
+            compatible = "google,cros-ec-rpmsg";
+        };
+    };
+
+  # Example for FPMCU
+  - |
+    spi {
+      #address-cells = <0x1>;
+      #size-cells = <0x0>;
+
+      ec@0 {
+        compatible = "google,cros-ec-fp", "google,cros-ec-spi";
+        reg = <0x0>;
+        interrupt-parent = <&gpio_controller>;
+        interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+        spi-max-frequency = <3000000>;
+        reset-gpios = <&gpio_controller 5 GPIO_ACTIVE_LOW>;
+        boot0-gpios = <&gpio_controller 10 GPIO_ACTIVE_HIGH>;
+        vdd-supply = <&pp3300_fp_mcu>;
+      };
+    };
+
+  # Example for UART
+  - |
+    serial {
+        cros-ec {
+            compatible = "google,cros-ec-uart";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/embedded-controller/gw,gsc.yaml b/Documentation/devicetree/bindings/embedded-controller/gw,gsc.yaml
new file mode 100644
index 000000000000..82d4b2dadbae
--- /dev/null
+++ b/Documentation/devicetree/bindings/embedded-controller/gw,gsc.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/embedded-controller/gw,gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gateworks System Controller
+
+description: |
+  The Gateworks System Controller (GSC) is a device present across various
+  Gateworks product families that provides a set of system related features
+  such as the following (refer to the board hardware user manuals to see what
+  features are present)
+   - Watchdog Timer
+   - GPIO
+   - Pushbutton controller
+   - Hardware monitor with ADC's for temperature and voltage rails and
+     fan controller
+
+maintainers:
+  - Tim Harvey <tharvey@gateworks.com>
+
+properties:
+  $nodename:
+    pattern: "gsc@[0-9a-f]{1,2}"
+  compatible:
+    const: gw,gsc
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  adc:
+    type: object
+    additionalProperties: false
+    description: Optional hardware monitoring module
+
+    properties:
+      compatible:
+        const: gw,gsc-adc
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^channel@[0-9a-f]+$":
+        type: object
+        additionalProperties: false
+        description: |
+          Properties for a single ADC which can report cooked values
+          (i.e. temperature sensor based on thermister), raw values
+          (i.e. voltage rail with a pre-scaling resistor divider).
+
+        properties:
+          reg:
+            description: Register of the ADC
+            maxItems: 1
+
+          label:
+            description: Name of the ADC input
+
+          gw,mode:
+            description: |
+              conversion mode:
+                0 - temperature, in C*10
+                1 - pre-scaled 24-bit voltage value
+                2 - scaled voltage based on an optional resistor divider
+                    and optional offset
+                3 - pre-scaled 16-bit voltage value
+                4 - fan tach input to report RPM's
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3, 4]
+
+          gw,voltage-divider-ohms:
+            description: Values of resistors for divider on raw ADC input
+            maxItems: 2
+            items:
+              minimum: 1000
+              maximum: 1000000
+
+          gw,voltage-offset-microvolt:
+            description: |
+              A positive voltage offset to apply to a raw ADC
+              (i.e. to compensate for a diode drop).
+            minimum: 0
+            maximum: 1000000
+
+        required:
+          - gw,mode
+          - reg
+          - label
+
+    required:
+      - compatible
+      - "#address-cells"
+      - "#size-cells"
+
+patternProperties:
+  "^fan-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description: Optional fan controller
+
+    properties:
+      compatible:
+        const: gw,gsc-fan
+
+      reg:
+        description: The fan controller base address
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gsc@20 {
+            compatible = "gw,gsc";
+            reg = <0x20>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            adc {
+                compatible = "gw,gsc-adc";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                channel@0 { /* A0: Board Temperature */
+                    reg = <0x00>;
+                    label = "temp";
+                    gw,mode = <0>;
+                };
+
+                channel@2 { /* A1: Input Voltage (raw ADC) */
+                    reg = <0x02>;
+                    label = "vdd_vin";
+                    gw,mode = <1>;
+                    gw,voltage-divider-ohms = <22100 1000>;
+                    gw,voltage-offset-microvolt = <800000>;
+                };
+
+                channel@b { /* A2: Battery voltage */
+                    reg = <0x0b>;
+                    label = "vdd_bat";
+                    gw,mode = <1>;
+                };
+            };
+
+            fan-controller@2c {
+                compatible = "gw,gsc-fan";
+                reg = <0x2c>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/embedded-controller/huawei,gaokun3-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/huawei,gaokun3-ec.yaml
new file mode 100644
index 000000000000..cd9e65b6c2ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/embedded-controller/huawei,gaokun3-ec.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/embedded-controller/huawei,gaokun3-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Huawei Matebook E Go Embedded Controller
+
+maintainers:
+  - Pengyu Luo <mitltlatltl@gmail.com>
+
+description:
+  Different from other Qualcomm Snapdragon sc8180x and sc8280xp-based
+  machines, the Huawei Matebook E Go tablets use embedded controllers
+  while others use a system called PMIC GLink which handles battery,
+  UCSI, USB Type-C DP Alt Mode. In addition, Huawei's implementation
+  also handles additional features, such as charging thresholds, FN
+  lock, smart charging, tablet lid status, thermal sensors, and more.
+
+properties:
+  compatible:
+    enum:
+      - huawei,gaokun3-ec
+
+  reg:
+    const: 0x38
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+patternProperties:
+  '^connector@[01]$':
+    $ref: /schemas/connector/usb-connector.yaml#
+
+    properties:
+      reg:
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        embedded-controller@38 {
+            compatible = "huawei,gaokun3-ec";
+            reg = <0x38>;
+
+            interrupts-extended = <&tlmm 107 IRQ_TYPE_LEVEL_LOW>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            connector@0 {
+                compatible = "usb-c-connector";
+                reg = <0>;
+                power-role = "dual";
+                data-role = "dual";
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        ucsi0_ss_in: endpoint {
+                            remote-endpoint = <&usb_0_qmpphy_out>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        ucsi0_sbu: endpoint {
+                            remote-endpoint = <&usb0_sbu_mux>;
+                        };
+                    };
+                };
+            };
+
+            connector@1 {
+                compatible = "usb-c-connector";
+                reg = <1>;
+                power-role = "dual";
+                data-role = "dual";
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+
+                        ucsi1_ss_in: endpoint {
+                            remote-endpoint = <&usb_1_qmpphy_out>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        ucsi1_sbu: endpoint {
+                            remote-endpoint = <&usb1_sbu_mux>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/embedded-controller/kontron,sl28cpld.yaml
index eb3b43547cb6..a77e67f6cb82 100644
--- a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
+++ b/Documentation/devicetree/bindings/embedded-controller/kontron,sl28cpld.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
+$id: http://devicetree.org/schemas/embedded-controller/kontron,sl28cpld.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Kontron's sl28cpld board management controller
@@ -16,7 +16,12 @@ description: |
 
 properties:
   compatible:
-    const: kontron,sl28cpld
+    oneOf:
+      - items:
+          - enum:
+              - kontron,sa67mcu
+          - const: kontron,sl28cpld
+      - const: kontron,sl28cpld
 
   reg:
     description:
@@ -39,19 +44,19 @@ properties:
 
 patternProperties:
   "^gpio(@[0-9a-f]+)?$":
-    $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+    $ref: /schemas/gpio/kontron,sl28cpld-gpio.yaml
 
   "^hwmon(@[0-9a-f]+)?$":
-    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+    $ref: /schemas/hwmon/kontron,sl28cpld-hwmon.yaml
 
   "^interrupt-controller(@[0-9a-f]+)?$":
-    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+    $ref: /schemas/interrupt-controller/kontron,sl28cpld-intc.yaml
 
   "^pwm(@[0-9a-f]+)?$":
-    $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+    $ref: /schemas/pwm/kontron,sl28cpld-pwm.yaml
 
   "^watchdog(@[0-9a-f]+)?$":
-    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+    $ref: /schemas/watchdog/kontron,sl28cpld-wdt.yaml
 
 required:
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/embedded-controller/lenovo,thinkpad-t14s-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/lenovo,thinkpad-t14s-ec.yaml
new file mode 100644
index 000000000000..c87ccb5b3086
--- /dev/null
+++ b/Documentation/devicetree/bindings/embedded-controller/lenovo,thinkpad-t14s-ec.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/embedded-controller/lenovo,thinkpad-t14s-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lenovo Thinkpad T14s Embedded Controller
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description:
+  The Qualcomm Snapdragon-based Lenovo Thinkpad T14s has an Embedded Controller
+  (EC) which handles things such as keyboard backlight, LEDs or non-standard
+  keys.
+
+properties:
+  compatible:
+    const: lenovo,thinkpad-t14s-ec
+
+  reg:
+    const: 0x28
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        embedded-controller@28 {
+            compatible = "lenovo,thinkpad-t14s-ec";
+            reg = <0x28>;
+            interrupts-extended = <&tlmm 66 IRQ_TYPE_LEVEL_LOW>;
+            wakeup-source;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/embedded-controller/lenovo,yoga-c630-ec.yaml b/Documentation/devicetree/bindings/embedded-controller/lenovo,yoga-c630-ec.yaml
new file mode 100644
index 000000000000..a029b38e8dc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/embedded-controller/lenovo,yoga-c630-ec.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/embedded-controller/lenovo,yoga-c630-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lenovo Yoga C630 Embedded Controller.
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The Qualcomm Snapdragon-based Lenovo Yoga C630 has an Embedded Controller
+  (EC) which handles things such as battery and USB Type-C. This binding
+  describes the interface, on an I2C bus, to this EC.
+
+properties:
+  compatible:
+    const: lenovo,yoga-c630-ec
+
+  reg:
+    const: 0x70
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+patternProperties:
+  '^connector@[01]$':
+    $ref: /schemas/connector/usb-connector.yaml#
+
+    properties:
+      reg:
+        maxItems: 1
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |+
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c1 {
+        clock-frequency = <400000>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        embedded-controller@70 {
+            compatible = "lenovo,yoga-c630-ec";
+            reg = <0x70>;
+
+            interrupts-extended = <&tlmm 20 IRQ_TYPE_LEVEL_HIGH>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            connector@0 {
+                compatible = "usb-c-connector";
+                reg = <0>;
+                power-role = "source";
+                data-role = "host";
+            };
+
+            connector@1 {
+                compatible = "usb-c-connector";
+                reg = <1>;
+                power-role = "source";
+                data-role = "host";
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/embedded-controller/microsoft,surface-sam.yaml b/Documentation/devicetree/bindings/embedded-controller/microsoft,surface-sam.yaml
new file mode 100644
index 000000000000..9202cfca0b35
--- /dev/null
+++ b/Documentation/devicetree/bindings/embedded-controller/microsoft,surface-sam.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/embedded-controller/microsoft,surface-sam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Surface System Aggregator Module (SAM, SSAM)
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Surface devices use a standardized embedded controller to let the
+  operating system interface with various hardware functions. The
+  specific functionalities are modeled as subdevices and matched on
+  five levels: domain, category, target, instance and function.
+
+properties:
+  compatible:
+    const: microsoft,surface-sam
+
+  interrupts:
+    maxItems: 1
+
+  current-speed: true
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    uart {
+        embedded-controller {
+            compatible = "microsoft,surface-sam";
+
+            interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>;
+
+            pinctrl-0 = <&ssam_state>;
+            pinctrl-names = "default";
+
+            current-speed = <4000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/embedded-controller/traverse,ten64-controller.yaml b/Documentation/devicetree/bindings/embedded-controller/traverse,ten64-controller.yaml
new file mode 100644
index 000000000000..08d02c4df873
--- /dev/null
+++ b/Documentation/devicetree/bindings/embedded-controller/traverse,ten64-controller.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/embedded-controller/traverse,ten64-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Traverse Ten64 board microcontroller
+
+maintainers:
+  - Mathew McBride <matt@traverse.com.au>
+
+description: |
+  The board microcontroller on the Ten64 board family is responsible for
+  management of power sources on the board, as well as signalling the SoC
+  to power on and reset.
+
+properties:
+  compatible:
+    const: traverse,ten64-controller
+
+  reg:
+    const: 0x7e
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        board-controller@7e {
+            compatible = "traverse,ten64-controller";
+            reg = <0x7e>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index c078796ae1b5..b04f3cc4312c 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -11,7 +11,7 @@ $id: http://devicetree.org/schemas/example-schema.yaml#
 # $schema is the meta-schema this schema should be validated with.
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: An example schema annotated with jsonschema details
+title: An Example Device
 
 maintainers:
   - Rob Herring <robh@kernel.org>
@@ -52,8 +52,7 @@ properties:
               - vendor,soc4-ip
               - vendor,soc3-ip
               - vendor,soc2-ip
-          - enum:
-              - vendor,soc1-ip
+          - const: vendor,soc1-ip
         # additionalItems being false is implied
         # minItems/maxItems equal to 2 is implied
       - items:
@@ -85,6 +84,9 @@ properties:
       discouraged.
 
   clock-names:
+    # For single-entry lists in clocks, resets etc., the xxx-names often do not
+    # bring any value, especially if they copy the IP block name.  In such case
+    # just skip the xxx-names.
     items:
       - const: bus
 
@@ -162,10 +164,24 @@ properties:
       don't need a type.
     enum: [ 100, 200, 300 ]
 
+  vendor,int-array-variable-length-and-constrained-values:
+    description: Array might define what type of elements might be used (e.g.
+      their range).
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
+
   child-node:
     description: Child nodes are just another property from a json-schema
       perspective.
     type: object  # DT nodes are json objects
+    # Child nodes also need additionalProperties or unevaluatedProperties, where
+    # 'false' should be used in most cases (see 'child-node-with-own-schema'
+    # below).
+    additionalProperties: false
     properties:
       vendor,a-child-node-property:
         description: Child node properties have all the same schema
@@ -175,6 +191,17 @@ properties:
     required:
       - vendor,a-child-node-property
 
+  child-node-with-own-schema:
+    description: |
+      Child node with their own compatible and device schema which ends in
+      'additionalProperties: false' or 'unevaluatedProperties: false' can
+      mention only the compatible and use here 'additionalProperties: true'.
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        const: vendor,sub-device
+
 # Describe the relationship between different properties
 dependencies:
   # 'vendor,bool-property' is only allowed when 'vendor,string-array-property'
@@ -196,7 +223,7 @@ required:
 #
 # For multiple 'if' schema, group them under an 'allOf'.
 #
-# If the conditionals become too unweldy, then it may be better to just split
+# If the conditionals become too unwieldy, then it may be better to just split
 # the binding into separate schema documents.
 allOf:
   - if:
@@ -207,6 +234,10 @@ allOf:
     then:
       required:
         - foo-supply
+    else:
+      # If otherwise the property is not allowed:
+      properties:
+        foo-supply: false
   # Altering schema depending on presence of properties is usually done by
   # dependencies (see above), however some adjustments might require if:
   - if:
@@ -235,13 +266,14 @@ examples:
   # be overridden or an appropriate parent bus node should be shown (such as on
   # i2c buses).
   #
-  # Any includes used have to be explicitly included.
+  # Any includes used have to be explicitly included. Use 4-space indentation.
   - |
     node@1000 {
-          compatible = "vendor,soc4-ip", "vendor,soc1-ip";
-          reg = <0x1000 0x80>,
-                <0x3000 0x80>;
-          reg-names = "core", "aux";
-          interrupts = <10>;
-          interrupt-controller;
+        compatible = "vendor,soc4-ip", "vendor,soc1-ip";
+        reg = <0x1000 0x80>,
+              <0x3000 0x80>;
+        reg-names = "core", "aux";
+        interrupts = <10>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
     };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
index d5cfa32ea52d..072b3c0c5fd0 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml
@@ -37,6 +37,11 @@ properties:
       GPIO pin (output) used to control VBUS. If skipped, no such control
       takes place.
 
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the usb controller for the dual role switch.
+
 required:
   - compatible
   - interrupts
@@ -58,5 +63,11 @@ examples:
             interrupt-parent = <&msmgpio>;
             interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
             vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&usb1_drd_sw>;
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt b/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
deleted file mode 100644
index cfcf455ad4de..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-rt8973a.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-
-* Richtek RT8973A - Micro USB Switch device
-
-The Richtek RT8973A is Micro USB Switch with OVP and I2C interface. The RT8973A
-is a USB port accessory detector and switch that is optimized to protect low
-voltage system from abnormal high input voltage (up to 28V) and supports high
-speed USB operation. Also, RT8973A support 'auto-configuration' mode.
-If auto-configuration mode is enabled, RT8973A would control internal h/w patch
-for USB D-/D+ switching.
-
-Required properties:
-- compatible: Should be "richtek,rt8973a-muic"
-- reg: Specifies the I2C slave address of the MUIC block. It should be 0x14
-- interrupts: Interrupt specifiers for detection interrupt sources.
-
-Example:
-
-	rt8973a@14 {
-		compatible = "richtek,rt8973a-muic";
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 0>;
-		reg = <0x14>;
-	};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
deleted file mode 100644
index dfc14f71e81f..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-USB GPIO Extcon device
-
-This is a virtual device used to generate USB cable states from the USB ID pin
-connected to a GPIO pin.
-
-Required properties:
-- compatible: Should be "linux,extcon-usb-gpio"
-
-Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
-- id-gpio: gpio for USB ID pin. See gpio binding.
-- vbus-gpio: gpio for USB VBUS pin.
-
-Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
-	extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
-	}
-
-	&omap_dwc3_1 {
-		extcon = <&extcon_usb1>;
-	};
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
index 20e1ccfc8630..e00c8072bae9 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
@@ -8,7 +8,6 @@ title: ChromeOS EC USB Type-C cable and accessories detection
 
 maintainers:
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
@@ -35,12 +34,13 @@ additionalProperties: false
 
 examples:
   - |
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
         cros-ec@0 {
             compatible = "google,cros-ec-spi";
             reg = <0>;
+            interrupts = <44 0>;
 
             usbc_extcon0: extcon0 {
                 compatible = "google,extcon-usbc-cros-ec";
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
index 71a9f2e5d0dc..126107dd57b1 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
@@ -30,7 +30,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
         tusb320@61 {
diff --git a/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml
new file mode 100644
index 000000000000..8f29d333602b
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/linux,extcon-usb-gpio.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/linux,extcon-usb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB GPIO Extcon device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  This is a virtual device used to generate USB cable states from the USB ID pin
+  connected to a GPIO pin.
+
+properties:
+  compatible:
+    const: linux,extcon-usb-gpio
+
+  id-gpios:
+    description: gpio for USB ID pin. See gpio binding.
+  vbus-gpios:
+    description: gpio for USB VBUS pin.
+
+required:
+  - compatible
+
+anyOf:
+  - required:
+      - id-gpios
+  - required:
+      - vbus-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    extcon_usb1 {
+        compatible = "linux,extcon-usb-gpio";
+        id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/extcon/maxim,max14526.yaml b/Documentation/devicetree/bindings/extcon/maxim,max14526.yaml
new file mode 100644
index 000000000000..7eb5918df1c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/maxim,max14526.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/maxim,max14526.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14526 MicroUSB Integrated Circuit (MUIC)
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+properties:
+  compatible:
+    const: maxim,max14526
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - connector
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        muic@44 {
+            compatible = "maxim,max14526";
+            reg = <0x44>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <72 IRQ_TYPE_EDGE_FALLING>;
+
+            connector {
+                compatible = "usb-b-connector";
+                label = "micro-USB";
+                type = "micro";
+            };
+
+            port {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                muic_to_charger: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&charger_input>;
+                };
+
+                muic_to_usb: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&usb_input>;
+                };
+
+                muic_to_mhl: endpoint@2 {
+                    reg = <2>;
+                    remote-endpoint = <&mhl_input>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
new file mode 100644
index 000000000000..55800fb0221d
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC Extcon
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77843-muic
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Any connector to the data bus of this controller should be modelled using
+      the OF graph bindings specified
+    properties:
+      port:
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - connector
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
index 6a9c96f0352a..6b80518cbf62 100644
--- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
+++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device
 
 maintainers:
-  - Guru Das Srinagesh <gurus@codeaurora.org>
+  - Guru Das Srinagesh <quic_gurus@quicinc.com>
 
 description: |
   Some Qualcomm PMICs have a "misc" module that can be used to detect when
@@ -27,10 +27,14 @@ properties:
 
   interrupt-names:
     minItems: 1
-    items:
-      - const: usb_id
-      - const: usb_vbus
-
+    anyOf:
+      - items:
+          - const: usb_id
+          - const: usb_vbus
+      - items:
+          - const: usb_id
+      - items:
+          - const: usb_vbus
 required:
   - compatible
   - reg
@@ -49,7 +53,7 @@ examples:
             interrupt-controller;
             #interrupt-cells = <4>;
 
-            usb_id: misc@900 {
+            usb_id: usb-detect@900 {
                     compatible = "qcom,pm8941-misc";
                     reg = <0x900>;
                     interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
diff --git a/Documentation/devicetree/bindings/extcon/richtek,rt8973a-muic.yaml b/Documentation/devicetree/bindings/extcon/richtek,rt8973a-muic.yaml
new file mode 100644
index 000000000000..f9e0d816c025
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/richtek,rt8973a-muic.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/richtek,rt8973a-muic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT8973A MUIC
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+
+description:
+  The Richtek RT8973A is Micro USB Switch with OVP and I2C interface. The RT8973A
+  is a USB port accessory detector and switch that is optimized to protect low
+  voltage system from abnormal high input voltage (up to 28V) and supports high
+  speed USB operation. Also, RT8973A support 'auto-configuration' mode.
+  If auto-configuration mode is enabled, RT8973A would control internal h/w patch
+  for USB D-/D+ switching.
+
+properties:
+  compatible:
+    const: richtek,rt8973a-muic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        usb-switch@14 {
+          compatible = "richtek,rt8973a-muic";
+          reg = <0x14>;
+          interrupt-parent = <&gpio>;
+          interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
index fd2e55088888..7ef2d9bef72d 100644
--- a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
+++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
@@ -20,11 +20,16 @@ properties:
     enum:
       - siliconmitus,sm5502-muic
       - siliconmitus,sm5504-muic
+      - siliconmitus,sm5703-muic
 
   reg:
     maxItems: 1
-    description: I2C slave address of the device. Usually 0x25 for SM5502,
-      0x14 for SM5504.
+    description: I2C slave address of the device. Usually 0x25 for SM5502
+      and SM5703, 0x14 for SM5504.
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
 
   interrupts:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
index efdf59abb2e1..351b202d0e10 100644
--- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
@@ -23,7 +23,7 @@ properties:
       headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
       to HPDETR.  If this node is not included or if the value is unknown,
       then headphone detection mode is set to HPDETL.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 1
     maximum: 2
 
@@ -51,7 +51,7 @@ properties:
     description:
       Additional software microphone detection debounce specified in
       milliseconds.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   wlf,micd-pol-gpio:
     description:
@@ -63,7 +63,7 @@ properties:
     description:
       Time allowed for MICBIAS to startup prior to performing microphone
       detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 12
 
@@ -71,7 +71,7 @@ properties:
     description:
       Delay between successive microphone detection measurements, specified
       as per the ARIZONA_MICD_TIME_XXX defines.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 12
 
@@ -79,7 +79,7 @@ properties:
     description:
       Microphone detection hardware debounces specified as the number of
       measurements to take.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [2, 4]
 
   wlf,micd-timeout-ms:
@@ -97,7 +97,7 @@ properties:
       CTIA / OMTP headsets), the field can be of variable length but
       should always be a multiple of 3 cells long, each three cell group
       represents one polarity configuration.
-    $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     items:
       items:
         - description:
@@ -119,7 +119,7 @@ properties:
     description:
       Settings for the general purpose switch, set as one of the
       ARIZONA_GPSW_XXX defines.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 3
 
diff --git a/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml b/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml
new file mode 100644
index 000000000000..8f50e698760e
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/amlogic,meson-gxbb-sm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Secure Monitor (SM)
+
+description:
+  In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+  NVMEM, enable JTAG, set USB boot, etc...
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-gxbb-sm
+      - items:
+          - const: amlogic,meson-gx-sm
+          - const: amlogic,meson-gxbb-sm
+
+  power-controller:
+    type: object
+    $ref: /schemas/power/amlogic,meson-sec-pwrc.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+        secure-monitor {
+            compatible = "amlogic,meson-gxbb-sm";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 5c4c6782e052..be817fd9cc34 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/firmware/arm,scmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: System Control and Management Interface (SCMI) Message Protocol bindings
+title: System Control and Management Interface (SCMI) Message Protocol
 
 maintainers:
   - Sudeep Holla <sudeep.holla@arm.com>
@@ -22,9 +22,12 @@ description: |
 
   [0] https://developer.arm.com/documentation/den0056/latest
 
+anyOf:
+  - $ref: /schemas/firmware/nxp,imx95-scmi.yaml
+
 properties:
   $nodename:
-    const: scmi
+    pattern: '^scmi(-[0-9]+)?$'
 
   compatible:
     oneOf:
@@ -34,10 +37,20 @@ properties:
       - description: SCMI compliant firmware with ARM SMC/HVC transport
         items:
           - const: arm,scmi-smc
+      - description: SCMI compliant firmware with ARM SMC/HVC transport
+                     with shmem address(4KB-page, offset) as parameters
+        items:
+          - const: arm,scmi-smc-param
+      - description: SCMI compliant firmware with Qualcomm SMC/HVC transport
+        items:
+          - const: qcom,scmi-smc
       - description: SCMI compliant firmware with SCMI Virtio transport.
                      The virtio transport only supports a single device.
         items:
           - const: arm,scmi-virtio
+      - description: SCMI compliant firmware with OP-TEE transport
+        items:
+          - const: linaro,scmi-optee
 
   interrupts:
     description:
@@ -53,17 +66,42 @@ properties:
     description:
       Specifies the mailboxes used to communicate with SCMI compliant
       firmware.
-    items:
-      - const: tx
-      - const: rx
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+        minItems: 1
+      - items:
+          - const: tx
+          - const: tx_reply
+          - const: rx
+          - const: rx_reply
+        minItems: 2
 
   mboxes:
     description:
       List of phandle and mailbox channel specifiers. It should contain
-      exactly one or two mailboxes, one for transmitting messages("tx")
-      and another optional for receiving the notifications("rx") if supported.
+      exactly one, two, three or four mailboxes; the first one or two for
+      transmitting messages ("tx") and another optional ("rx") for receiving
+      notifications and delayed responses, if supported by the platform.
+      The optional ("rx_reply") is for notifications completion interrupt,
+      if supported by the platform.
+      The number of mailboxes needed for transmitting messages depends on the
+      type of channels exposed by the specific underlying mailbox controller;
+      one single channel descriptor is enough if such channel is bidirectional,
+      while two channel descriptors are needed to represent the SCMI ("tx")
+      channel if the underlying mailbox channels are of unidirectional type.
+      The effective combination in numbers of mboxes and shmem descriptors let
+      the SCMI subsystem determine unambiguosly which type of SCMI channels are
+      made available by the underlying mailbox controller and how to use them.
+       1 mbox / 1 shmem => SCMI TX over 1 mailbox bidirectional channel
+       2 mbox / 2 shmem => SCMI TX and RX over 2 mailbox bidirectional channels
+       2 mbox / 1 shmem => SCMI TX over 2 mailbox unidirectional channels
+       3 mbox / 2 shmem => SCMI TX and RX over 3 mailbox unidirectional channels
+       4 mbox / 2 shmem => SCMI TX and RX over 4 mailbox unidirectional channels
+      Any other combination of mboxes and shmem is invalid.
     minItems: 1
-    maxItems: 2
+    maxItems: 4
 
   shmem:
     description:
@@ -78,13 +116,50 @@ properties:
   '#size-cells':
     const: 0
 
+  atomic-threshold-us:
+    description:
+      An optional time value, expressed in microseconds, representing, on this
+      platform, the threshold above which any SCMI command, advertised to have
+      an higher-than-threshold execution latency, should not be considered for
+      atomic mode of operation, even if requested.
+    default: 0
+
+  arm,max-rx-timeout-ms:
+    description:
+      An optional time value, expressed in milliseconds, representing the
+      transport maximum timeout value for the receive channel. The value should
+      be a non-zero value if set.
+    minimum: 1
+
+  arm,max-msg-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      An optional value, expressed in bytes, representing the maximum size
+      allowed for the payload of messages transmitted on this transport.
+
+  arm,max-msg:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      An optional value representing the maximum number of concurrent in-flight
+      messages allowed by this transport; this number represents the maximum
+      number of concurrently outstanding messages that the server can handle on
+      this platform. If set, the value should be non-zero.
+    minimum: 1
+
   arm,smc-id:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
       SMC id required when using smc or hvc transports
 
+  linaro,optee-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Channel specifier required when using OP-TEE transport.
+
   protocol@11:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x11
@@ -95,8 +170,18 @@ properties:
     required:
       - '#power-domain-cells'
 
+  protocol@12:
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x12
+
   protocol@13:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x13
@@ -104,11 +189,20 @@ properties:
       '#clock-cells':
         const: 1
 
-    required:
-      - '#clock-cells'
+      '#power-domain-cells':
+        const: 1
+
+    oneOf:
+      - required:
+          - '#clock-cells'
+
+      - required:
+          - '#power-domain-cells'
 
   protocol@14:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x14
@@ -120,7 +214,9 @@ properties:
       - '#clock-cells'
 
   protocol@15:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x15
@@ -132,7 +228,9 @@ properties:
       - '#thermal-sensor-cells'
 
   protocol@16:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x16
@@ -144,20 +242,31 @@ properties:
       - '#reset-cells'
 
   protocol@17:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x17
 
       regulators:
         type: object
+        additionalProperties: false
         description:
           The list of all regulators provided by this SCMI controller.
 
+        properties:
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
         patternProperties:
-          '^regulators@[0-9a-f]+$':
+          '^regulator@[0-9a-f]+$':
             type: object
-            $ref: "../regulator/regulator.yaml#"
+            $ref: /schemas/regulator/regulator.yaml#
+            unevaluatedProperties: false
 
             properties:
               reg:
@@ -167,10 +276,51 @@ properties:
             required:
               - reg
 
-additionalProperties: false
+  protocol@18:
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x18
+
+  protocol@19:
+    type: object
+    allOf:
+      - $ref: '#/$defs/protocol-node'
+      - anyOf:
+          - $ref: /schemas/pinctrl/pinctrl.yaml
+          - $ref: /schemas/firmware/nxp,imx95-scmi-pinctrl.yaml
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x19
+
+    patternProperties:
+      '-pins$':
+        type: object
+        allOf:
+          - $ref: /schemas/pinctrl/pincfg-node.yaml#
+          - $ref: /schemas/pinctrl/pinmux-node.yaml#
+        unevaluatedProperties: false
+
+        description:
+          A pin multiplexing sub-node describes how to configure a
+          set of pins in some desired function.
+          A single sub-node may define several pin configurations.
+          This sub-node is using the default pinctrl bindings to configure
+          pin multiplexing and using SCMI protocol to apply a specified
+          configuration.
+
+    required:
+      - reg
+
+unevaluatedProperties: false
 
-patternProperties:
-  '^protocol@[0-9a-f]+$':
+$defs:
+  protocol-node:
     type: object
     description:
       Each sub-node represents a protocol supported. If the platform
@@ -183,18 +333,31 @@ patternProperties:
         maxItems: 1
 
       mbox-names:
-        items:
-          - const: tx
-          - const: rx
+        oneOf:
+          - items:
+              - const: tx
+              - const: rx
+            minItems: 1
+          - items:
+              - const: tx
+              - const: tx_reply
+              - const: rx
+            minItems: 2
 
       mboxes:
         minItems: 1
-        maxItems: 2
+        maxItems: 3
 
       shmem:
         minItems: 1
         maxItems: 2
 
+      linaro,optee-channel-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Channel specifier required when using OP-TEE transport and
+          protocol has a dedicated communication channel.
+
     required:
       - reg
 
@@ -220,12 +383,25 @@ else:
     properties:
       compatible:
         contains:
-          const: arm,scmi-smc
+          enum:
+            - arm,scmi-smc
+            - arm,scmi-smc-param
+            - qcom,scmi-smc
   then:
     required:
       - arm,smc-id
       - shmem
 
+  else:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: linaro,scmi-optee
+    then:
+      required:
+        - linaro,optee-channel-id
+
 examples:
   - |
     firmware {
@@ -240,6 +416,8 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
+            atomic-threshold-us = <10000>;
+
             scmi_devpd: protocol@11 {
                 reg = <0x11>;
                 #power-domain-cells = <1>;
@@ -247,7 +425,7 @@ examples:
 
             scmi_dvfs: protocol@13 {
                 reg = <0x13>;
-                #clock-cells = <1>;
+                #power-domain-cells = <1>;
 
                 mboxes = <&mhuB 1 0>,
                          <&mhuB 1 1>;
@@ -289,6 +467,29 @@ examples:
                     };
                 };
             };
+
+            scmi_powercap: protocol@18 {
+                reg = <0x18>;
+            };
+
+            scmi_pinctrl: protocol@19 {
+                reg = <0x19>;
+
+                i2c2-pins {
+                    groups = "g_i2c2_a", "g_i2c2_b";
+                    function = "f_i2c2";
+                };
+
+                mdio-pins {
+                    groups = "g_avb_mdio";
+                    drive-strength = <24>;
+                };
+
+                keys_pins: keys-pins {
+                    pins = "gpio_5_17", "gpio_5_20", "gpio_5_22", "gpio_2_1";
+                    bias-pull-up;
+                };
+            };
         };
     };
 
@@ -330,7 +531,7 @@ examples:
     firmware {
         scmi {
             compatible = "arm,scmi-smc";
-            shmem = <&cpu_scp_lpri0 &cpu_scp_lpri1>;
+            shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>;
             arm,smc-id = <0xc3000001>;
 
             #address-cells = <1>;
@@ -340,7 +541,48 @@ examples:
                 reg = <0x11>;
                 #power-domain-cells = <1>;
             };
+        };
+    };
 
+  - |
+    firmware {
+        scmi {
+            compatible = "linaro,scmi-optee";
+            linaro,optee-channel-id = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            scmi_dvfs1: protocol@13 {
+                reg = <0x13>;
+                linaro,optee-channel-id = <1>;
+                shmem = <&cpu_optee_lpri0>;
+                #power-domain-cells = <1>;
+            };
+
+            scmi_clk0: protocol@14 {
+                reg = <0x14>;
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@51000000 {
+            compatible = "mmio-sram";
+            reg = <0x0 0x51000000 0x0 0x10000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x0 0x51000000 0x10000>;
+
+            cpu_optee_lpri0: optee-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
index 23b346bd1252..241317239ffc 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/firmware/arm,scpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: System Control and Power Interface (SCPI) Message Protocol bindings
+title: System Control and Power Interface (SCPI) Message Protocol
 
 maintainers:
   - Sudeep Holla <sudeep.holla@arm.com>
@@ -43,6 +43,7 @@ properties:
       by remote SCP firmware for use by SCPI message protocol should be
       specified in any order.
     minItems: 1
+    maxItems: 4
 
   shmem:
     description:
@@ -51,6 +52,7 @@ properties:
       be any memory reserved for the purpose of this communication between the
       processors.
     minItems: 1
+    maxItems: 4
 
   power-controller:
     type: object
@@ -235,8 +237,8 @@ examples:
     firmware {
         scpi {
             compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
-            mboxes = <&mailbox 1 &mailbox 2>;
-            shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+            mboxes = <&mailbox 1>, <&mailbox 2>;
+            shmem = <&cpu_scp_lpri>, <&cpu_scp_hpri>;
 
             scpi_sensors1: sensors {
                 compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
diff --git a/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
new file mode 100644
index 000000000000..684b15ba9ad0
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/brcm,kona-smc.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/brcm,kona-smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family Secure Monitor bounce buffer
+
+description:
+  A bounce buffer used for non-secure to secure communications.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11351-smc
+          - brcm,bcm21664-smc
+          - brcm,bcm23550-smc
+      - const: brcm,kona-smc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    smc@3404c000 {
+        compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
+        reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
+    };
+...
diff --git a/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml b/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml
new file mode 100644
index 000000000000..af9249695ef5
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/cznic,turris-omnia-mcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CZ.NIC's Turris Omnia MCU
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+description:
+  The MCU on Turris Omnia acts as a system controller providing additional
+  GPIOs, interrupts, watchdog, system power off and wakeup configuration.
+
+properties:
+  compatible:
+    const: cznic,turris-omnia-mcu
+
+  reg:
+    description: MCU I2C slave address
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      The first cell specifies the interrupt number (0 to 63), the second cell
+      specifies interrupt type (which can be one of IRQ_TYPE_EDGE_RISING,
+      IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_BOTH).
+      The interrupt numbers correspond sequentially to GPIO numbers, taking the
+      GPIO banks into account:
+        IRQ number   GPIO bank   GPIO pin within bank
+           0 - 15      0           0 - 15
+          16 - 47      1           0 - 31
+          48 - 63      2           0 - 15
+      There are several exceptions:
+        IRQ number   meaning
+          11           LED panel brightness changed by button press
+          13           TRNG entropy ready
+          14           ECDSA message signature computation done
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 3
+    description:
+      The first cell is bank number (0, 1 or 2), the second cell is pin number
+      within the bank (0 to 15 for banks 0 and 2, 0 to 31 for bank 1), and the
+      third cell specifies consumer flags.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        system-controller@2a {
+            compatible = "cznic,turris-omnia-mcu";
+            reg = <0x2a>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <11 IRQ_TYPE_NONE>;
+
+            gpio-controller;
+            #gpio-cells = <3>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/fsl,scu.yaml b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
new file mode 100644
index 000000000000..f9ba18f06369
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/fsl,scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX System Controller Firmware (SCFW)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+  The System Controller Firmware (SCFW) is a low-level system function
+  which runs on a dedicated Cortex-M core to provide power, clock, and
+  resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+  (QM, QP), and i.MX8QX (QXP, DX).
+  The AP communicates with the SC using a multi-ported MU module found
+  in the LSIO subsystem. The current definition of this MU module provides
+  5 remote AP connections to the SC to support up to 5 execution environments
+  (TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
+  with the LSIO DSC IP bus. The SC firmware will communicate with this MU
+  using the MSI bus.
+
+properties:
+  compatible:
+    const: fsl,imx-scu
+
+  clock-controller:
+    description:
+      Clock controller node that provides the clocks controlled by the SCU
+    $ref: /schemas/clock/fsl,scu-clk.yaml
+
+  gpio:
+    description:
+      Control the GPIO PINs on SCU domain over the firmware APIs
+    $ref: /schemas/gpio/fsl,imx8qxp-sc-gpio.yaml
+
+  ocotp:
+    description:
+      OCOTP controller node provided by the SCU
+    $ref: /schemas/nvmem/fsl,scu-ocotp.yaml
+
+  keys:
+    description:
+      Keys provided by the SCU
+    $ref: /schemas/input/fsl,scu-key.yaml
+
+  reset-controller:
+    type: object
+    properties:
+      compatible:
+        const: fsl,imx-scu-reset
+      '#reset-cells':
+        const: 1
+    required:
+      - compatible
+      - '#reset-cells'
+    additionalProperties: false
+
+  mboxes:
+    description:
+      A list of phandles of TX MU channels followed by a list of phandles of
+      RX MU channels. The list may include at the end one more optional MU
+      channel for general interrupt. The number of expected tx and rx
+      channels is 1 TX and 1 RX channels if MU instance is "fsl,imx8-mu-scu"
+      compatible, 4 TX and 4 RX channels otherwise. All MU channels must be
+      within the same MU instance. Cross instances are not allowed. The MU
+      instance can only be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users
+      need to ensure that one is used that does not conflict with other
+      execution environments such as ATF.
+    oneOf:
+      - items:
+          - description: TX0 MU channel
+          - description: RX0 MU channel
+      - items:
+          - description: TX0 MU channel
+          - description: RX0 MU channel
+          - description: optional MU channel for general interrupt
+      - items:
+          - description: TX0 MU channel
+          - description: TX1 MU channel
+          - description: TX2 MU channel
+          - description: TX3 MU channel
+          - description: RX0 MU channel
+          - description: RX1 MU channel
+          - description: RX2 MU channel
+          - description: RX3 MU channel
+      - items:
+          - description: TX0 MU channel
+          - description: TX1 MU channel
+          - description: TX2 MU channel
+          - description: TX3 MU channel
+          - description: RX0 MU channel
+          - description: RX1 MU channel
+          - description: RX2 MU channel
+          - description: RX3 MU channel
+          - description: optional MU channel for general interrupt
+
+  mbox-names:
+    oneOf:
+      - items:
+          - const: tx0
+          - const: rx0
+      - items:
+          - const: tx0
+          - const: rx0
+          - const: gip3
+      - items:
+          - const: tx0
+          - const: tx1
+          - const: tx2
+          - const: tx3
+          - const: rx0
+          - const: rx1
+          - const: rx2
+          - const: rx3
+      - items:
+          - const: tx0
+          - const: tx1
+          - const: tx2
+          - const: tx3
+          - const: rx0
+          - const: rx1
+          - const: rx2
+          - const: rx3
+          - const: gip3
+
+  pinctrl:
+    description:
+      Pin controller provided by the SCU
+    $ref: /schemas/pinctrl/fsl,scu-pinctrl.yaml
+
+  power-controller:
+    description:
+      Power domains controller node that provides the power domains
+      controlled by the SCU
+    $ref: /schemas/power/fsl,scu-pd.yaml
+
+  rtc:
+    description:
+      RTC controller provided by the SCU
+    $ref: /schemas/rtc/fsl,scu-rtc.yaml
+
+  thermal-sensor:
+    description:
+      Thermal sensor provided by the SCU
+    $ref: /schemas/thermal/fsl,scu-thermal.yaml
+
+  watchdog:
+    description:
+      Watchdog controller provided by the SCU
+    $ref: /schemas/watchdog/fsl,scu-wdt.yaml
+
+required:
+  - compatible
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/pinctrl/pads-imx8qxp.h>
+
+    firmware {
+        system-controller {
+            compatible = "fsl,imx-scu";
+            mbox-names = "tx0", "tx1", "tx2", "tx3",
+                         "rx0", "rx1", "rx2", "rx3",
+                         "gip3";
+            mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 &lsio_mu1 0 3
+                      &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 &lsio_mu1 1 3
+                      &lsio_mu1 3 3>;
+
+            clock-controller {
+                compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+                #clock-cells = <2>;
+            };
+
+            pinctrl {
+                compatible = "fsl,imx8qxp-iomuxc";
+
+                pinctrl_lpuart0: lpuart0grp {
+                    fsl,pins = <
+                        IMX8QXP_UART0_RX_ADMA_UART0_RX   0x06000020
+                        IMX8QXP_UART0_TX_ADMA_UART0_TX   0x06000020
+                    >;
+                };
+            };
+
+            ocotp {
+                compatible = "fsl,imx8qxp-scu-ocotp";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                fec_mac0: mac@2c4 {
+                    reg = <0x2c4 6>;
+                };
+            };
+
+            power-controller {
+                compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+                #power-domain-cells = <1>;
+            };
+
+            rtc {
+                compatible = "fsl,imx8qxp-sc-rtc";
+            };
+
+            keys {
+                compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+                linux,keycodes = <KEY_POWER>;
+            };
+
+            watchdog {
+                compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+                timeout-sec = <60>;
+            };
+
+            thermal-sensor {
+                compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+                #thermal-sensor-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
new file mode 100644
index 000000000000..d3bca6088d12
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/google,gs101-acpm-ipc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos ACPM mailbox protocol
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+description: |
+  ACPM (Alive Clock and Power Manager) is a firmware that operates on the
+  APM (Active Power Management) module that handles overall power management
+  activities. ACPM and masters regard each other as independent hardware
+  component and communicate with each other using mailbox messages and
+  shared memory.
+
+  This binding is intended to define the interface the firmware implementing
+  ACPM provides for OSPM in the device tree.
+
+properties:
+  compatible:
+    const: google,gs101-acpm-ipc
+
+  "#clock-cells":
+    const: 1
+    description:
+      Clocks that are variable and index based. These clocks don't provide
+      an entire range of values between the limits but only discrete points
+      within the range. The firmware also manages the voltage scaling
+      appropriately with the clock scaling. The argument is the ID of the
+      clock contained by the firmware messages.
+
+  mboxes:
+    maxItems: 1
+
+  pmic:
+    description: Child node describing the main PMIC.
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: samsung,s2mpg10-pmic
+
+  shmem:
+    description:
+      List of phandle pointing to the shared memory (SHM) area. The memory
+      contains channels configuration data and the TX/RX ring buffers that
+      are used for passing messages to/from the ACPM firmware.
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - mboxes
+  - shmem
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    power-management {
+        compatible = "google,gs101-acpm-ipc";
+        #clock-cells = <1>;
+        mboxes = <&ap2apm_mailbox>;
+        shmem = <&apm_sram>;
+
+        pmic {
+            compatible = "samsung,s2mpg10-pmic";
+            interrupts-extended = <&gpa0 6 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                LDO1 {
+                    regulator-name = "vdd_ldo1";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <450000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
index c435c9f369a4..50f1f08744a1 100644
--- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
+++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Linaro Ltd.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/firmware/intel,ixp4xx-network-processing-engine.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/firmware/intel,ixp4xx-network-processing-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Intel IXP4xx Network Processing Engine
 
@@ -37,6 +37,20 @@ properties:
       should be named with the instance number of the NPE engine used for
       the crypto engine.
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  hss@[0-9]+$:
+    $ref: /schemas/net/intel,ixp4xx-hss.yaml#
+    type: object
+    description: Optional node for the High Speed Serial link (HSS), the
+      node should be named with the instance number of the NPE engine
+      used for the HSS.
+
 required:
   - compatible
   - reg
@@ -45,15 +59,36 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     npe: npe@c8006000 {
-         compatible = "intel,ixp4xx-network-processing-engine";
-         reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
-
-         crypto {
-             compatible = "intel,ixp4xx-crypto";
-             intel,npe-handle = <&npe 2>;
-             queue-rx = <&qmgr 30>;
-             queue-txready = <&qmgr 29>;
-         };
+        compatible = "intel,ixp4xx-network-processing-engine";
+        reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hss@0 {
+            compatible = "intel,ixp4xx-hss";
+            reg = <0>;
+            intel,npe-handle = <&npe 0>;
+            intel,queue-chl-rxtrig = <&qmgr 12>;
+            intel,queue-chl-txready = <&qmgr 34>;
+            intel,queue-pkt-rx = <&qmgr 13>;
+            intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+            intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+            intel,queue-pkt-txdone = <&qmgr 22>;
+            cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+            rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+            dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+            dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+            clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+        };
+
+        crypto {
+            compatible = "intel,ixp4xx-crypto";
+            intel,npe-handle = <&npe 2>;
+            queue-rx = <&qmgr 30>;
+            queue-txready = <&qmgr 29>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
deleted file mode 100644
index 6eff1afd8daf..000000000000
--- a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Intel Service Layer Driver for Stratix10 SoC
-============================================
-Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
-processor system (HPS) and Secure Device Manager (SDM). When the FPGA is
-configured from HPS, there needs to be a way for HPS to notify SDM the
-location and size of the configuration data. Then SDM will get the
-configuration data from that location and perform the FPGA configuration.
-
-To meet the whole system security needs and support virtual machine requesting
-communication with SDM, only the secure world of software (EL3, Exception
-Layer 3) can interface with SDM. All software entities running on other
-exception layers must channel through the EL3 software whenever it needs
-service from SDM.
-
-Intel Stratix10 service layer driver, running at privileged exception level
-(EL1, Exception Layer 1), interfaces with the service providers and provides
-the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer
-driver also manages secure monitor call (SMC) to communicate with secure monitor
-code running in EL3.
-
-Required properties:
--------------------
-The svc node has the following mandatory properties, must be located under
-the firmware node.
-
-- compatible: "intel,stratix10-svc" or "intel,agilex-svc"
-- method: smc or hvc
-        smc - Secure Monitor Call
-        hvc - Hypervisor Call
-- memory-region:
-	phandle to the reserved memory node. See
-	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-	for details
-
-Example:
--------
-
-	reserved-memory {
-                #address-cells = <2>;
-                #size-cells = <2>;
-                ranges;
-
-                service_reserved: svcbuffer@0 {
-                        compatible = "shared-dma-pool";
-                        reg = <0x0 0x0 0x0 0x1000000>;
-                        alignment = <0x1000>;
-                        no-map;
-                };
-        };
-
-	firmware {
-		svc {
-			compatible = "intel,stratix10-svc";
-			method = "smc";
-			memory-region = <&service_reserved>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml
new file mode 100644
index 000000000000..b42cfa78b28b
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/intel,stratix10-svc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Service Layer Driver for Stratix10 SoC
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+  - Mahesh Rao <mahesh.rao@altera.com>
+
+description: >
+  Intel Stratix10 SoC is composed of a 64 bit quad-core ARM Cortex A53 hard
+  processor system (HPS) and Secure Device Manager (SDM). When the FPGA is
+  configured from HPS, there needs to be a way for HPS to notify SDM the
+  location and size of the configuration data. Then SDM will get the
+  configuration data from that location and perform the FPGA configuration.
+
+  To meet the whole system security needs and support virtual machine requesting
+  communication with SDM, only the secure world of software (EL3, Exception
+  Layer 3) can interface with SDM. All software entities running on other
+  exception layers must channel through the EL3 software whenever it needs
+  service from SDM.
+
+  Intel Stratix10 service layer driver, running at privileged exception level
+  (EL1, Exception Layer 1), interfaces with the service providers and provides
+  the services for FPGA configuration, QSPI, Crypto and warm reset. Service layer
+  driver also manages secure monitor call (SMC) to communicate with secure monitor
+  code running in EL3.
+
+properties:
+  compatible:
+    enum:
+      - intel,stratix10-svc
+      - intel,agilex-svc
+      - intel,agilex5-svc
+
+  method:
+    description: |
+      Supervisory call method to be used to communicate with the
+      secure service layer.
+      Permitted values are:
+      - "smc" : SMC #0, following the SMCCC
+      - "hvc" : HVC #0, following the SMCCC
+
+    $ref: /schemas/types.yaml#/definitions/string-array
+    enum:
+      - smc
+      - hvc
+
+  memory-region:
+    maxItems: 1
+    description:
+      reserved memory region for the service layer driver to
+      communicate with the secure device manager.
+
+  iommus:
+    maxItems: 1
+
+  fpga-mgr:
+    $ref: /schemas/fpga/intel,stratix10-soc-fpga-mgr.yaml
+    description: Optional child node for fpga manager to perform fabric configuration.
+
+required:
+  - compatible
+  - method
+  - memory-region
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - intel,agilex5-svc
+    then:
+      required:
+        - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    reserved-memory {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      service_reserved: svcbuffer@0 {
+              compatible = "shared-dma-pool";
+              reg = <0x0 0x0 0x0 0x1000000>;
+              alignment = <0x1000>;
+              no-map;
+      };
+    };
+
+    firmware {
+      svc {
+        compatible = "intel,stratix10-svc";
+        method = "smc";
+        memory-region = <&service_reserved>;
+
+        fpga-mgr {
+          compatible = "intel,stratix10-soc-fpga-mgr";
+        };
+      };
+    };
+
diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
deleted file mode 100644
index c248cd44f727..000000000000
--- a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* Amlogic Secure Monitor
-
-In the Amlogic SoCs the Secure Monitor code is used to provide access to the
-NVMEM, enable JTAG, set USB boot, etc...
-
-Required properties for the secure monitor node:
-- compatible: Should be "amlogic,meson-gxbb-sm"
-
-Example:
-
-	firmware {
-		sm: secure-monitor {
-			compatible = "amlogic,meson-gxbb-sm";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
deleted file mode 100644
index e44a13bc06ed..000000000000
--- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-NVIDIA Tegra Boot and Power Management Processor (BPMP)
-
-The BPMP is a specific processor in Tegra chip, which is designed for
-booting process handling and offloading the power management, clock
-management, and reset control tasks from the CPU. The binding document
-defines the resources that would be used by the BPMP firmware driver,
-which can create the interprocessor communication (IPC) between the CPU
-and BPMP.
-
-Required properties:
-- compatible
-    Array of strings
-    One of:
-    - "nvidia,tegra186-bpmp"
-- mboxes : The phandle of mailbox controller and the mailbox specifier.
-- shmem : List of the phandle of the TX and RX shared memory area that
-	  the IPC between CPU and BPMP is based on.
-- #clock-cells : Should be 1.
-- #power-domain-cells : Should be 1.
-- #reset-cells : Should be 1.
-
-This node is a mailbox consumer. See the following files for details of
-the mailbox subsystem, and the specifiers implemented by the relevant
-provider(s):
-
-- .../mailbox/mailbox.txt
-- .../mailbox/nvidia,tegra186-hsp.txt
-
-This node is a clock, power domain, and reset provider. See the following
-files for general documentation of those features, and the specifiers
-implemented by this node:
-
-- .../clock/clock-bindings.txt
-- <dt-bindings/clock/tegra186-clock.h>
-- ../power/power-domain.yaml
-- <dt-bindings/power/tegra186-powergate.h>
-- .../reset/reset.txt
-- <dt-bindings/reset/tegra186-reset.h>
-
-The BPMP implements some services which must be represented by separate nodes.
-For example, it can provide access to certain I2C controllers, and the I2C
-bindings represent each I2C controller as a device tree node. Such nodes should
-be nested directly inside the main BPMP node.
-
-Software can determine whether a child node of the BPMP node represents a device
-by checking for a compatible property. Any node with a compatible property
-represents a device that can be instantiated. Nodes without a compatible
-property may be used to provide configuration information regarding the BPMP
-itself, although no such configuration nodes are currently defined by this
-binding.
-
-The BPMP firmware defines no single global name-/numbering-space for such
-services. Put another way, the numbering scheme for I2C buses is distinct from
-the numbering scheme for any other service the BPMP may provide (e.g. a future
-hypothetical SPI bus service). As such, child device nodes will have no reg
-property, and the BPMP node will have no #address-cells or #size-cells property.
-
-The shared memory bindings for BPMP
------------------------------------
-
-The shared memory area for the IPC TX and RX between CPU and BPMP are
-predefined and work on top of sysram, which is an SRAM inside the chip.
-
-See ".../sram/sram.txt" for the bindings.
-
-Example:
-
-hsp_top0: hsp@3c00000 {
-	...
-	#mbox-cells = <2>;
-};
-
-sysram@30000000 {
-	compatible = "nvidia,tegra186-sysram", "mmio-sram";
-	reg = <0x0 0x30000000 0x0 0x50000>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
-
-	cpu_bpmp_tx: shmem@4e000 {
-		compatible = "nvidia,tegra186-bpmp-shmem";
-		reg = <0x0 0x4e000 0x0 0x1000>;
-		label = "cpu-bpmp-tx";
-		pool;
-	};
-
-	cpu_bpmp_rx: shmem@4f000 {
-		compatible = "nvidia,tegra186-bpmp-shmem";
-		reg = <0x0 0x4f000 0x0 0x1000>;
-		label = "cpu-bpmp-rx";
-		pool;
-	};
-};
-
-bpmp {
-	compatible = "nvidia,tegra186-bpmp";
-	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>;
-	shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
-	#clock-cells = <1>;
-	#power-domain-cells = <1>;
-	#reset-cells = <1>;
-
-	i2c {
-		compatible = "...";
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
new file mode 100644
index 000000000000..3c44fe607e12
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
@@ -0,0 +1,216 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/nvidia,tegra186-bpmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Boot and Power Management Processor (BPMP)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The BPMP is a specific processor in Tegra chip, which is designed for
+  booting process handling and offloading the power management, clock
+  management, and reset control tasks from the CPU. The binding document
+  defines the resources that would be used by the BPMP firmware driver,
+  which can create the interprocessor communication (IPC) between the
+  CPU and BPMP.
+
+  This node is a mailbox consumer. See the following files for details
+  of the mailbox subsystem, and the specifiers implemented by the
+  relevant provider(s):
+
+    - .../mailbox/mailbox.txt
+    - .../mailbox/nvidia,tegra186-hsp.yaml
+
+  This node is a clock, power domain, and reset provider. See the
+  following files for general documentation of those features, and the
+  specifiers implemented by this node:
+
+    - .../clock/clock-bindings.txt
+    - <dt-bindings/clock/tegra186-clock.h>
+    - ../power/power-domain.yaml
+    - <dt-bindings/power/tegra186-powergate.h>
+    - .../reset/reset.txt
+    - <dt-bindings/reset/tegra186-reset.h>
+
+  The BPMP implements some services which must be represented by
+  separate nodes. For example, it can provide access to certain I2C
+  controllers, and the I2C bindings represent each I2C controller as a
+  device tree node. Such nodes should be nested directly inside the main
+  BPMP node.
+
+  Software can determine whether a child node of the BPMP node
+  represents a device by checking for a compatible property. Any node
+  with a compatible property represents a device that can be
+  instantiated. Nodes without a compatible property may be used to
+  provide configuration information regarding the BPMP itself, although
+  no such configuration nodes are currently defined by this binding.
+
+  The BPMP firmware defines no single global name-/numbering-space for
+  such services. Put another way, the numbering scheme for I2C buses is
+  distinct from the numbering scheme for any other service the BPMP may
+  provide (e.g. a future hypothetical SPI bus service). As such, child
+  device nodes will have no reg property, and the BPMP node will have no
+  "#address-cells" or "#size-cells" property.
+
+  The shared memory area for the IPC TX and RX between CPU and BPMP are
+  predefined and work on top of either sysram, which is an SRAM inside the
+  chip, or in normal SDRAM.
+  See ".../sram/sram.yaml" for the bindings for the SRAM case.
+  See "../reserved-memory/nvidia,tegra264-bpmp-shmem.yaml" for bindings for
+  the SDRAM case.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra194-bpmp
+              - nvidia,tegra234-bpmp
+              - nvidia,tegra264-bpmp
+          - const: nvidia,tegra186-bpmp
+      - const: nvidia,tegra186-bpmp
+
+  mboxes:
+    description: A phandle and channel specifier for the mailbox used to
+      communicate with the BPMP.
+    maxItems: 1
+
+  shmem:
+    description: List of the phandle to the TX and RX shared memory area
+      that the IPC between CPU and BPMP is based on.
+    minItems: 2
+    maxItems: 2
+
+  memory-region:
+    description: phandle to reserved memory region used for IPC between
+      CPU-NS and BPMP.
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+      - description: DMA read client
+      - description: DMA write client
+
+  interconnect-names:
+    items:
+      - const: read
+      - const: write
+      - const: dma-mem # dma-read
+      - const: dma-write
+
+  iommus:
+    maxItems: 1
+
+  i2c:
+    type: object
+
+  thermal:
+    type: object
+
+additionalProperties: false
+
+oneOf:
+  - required:
+      - memory-region
+  - required:
+      - shmem
+
+required:
+  - compatible
+  - mboxes
+  - "#clock-cells"
+  - "#power-domain-cells"
+  - "#reset-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+
+    hsp_top0: hsp@3c00000 {
+        compatible = "nvidia,tegra186-hsp";
+        reg = <0x03c00000 0xa0000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "doorbell";
+        #mbox-cells = <2>;
+    };
+
+    sram@30000000 {
+        compatible = "nvidia,tegra186-sysram", "mmio-sram";
+        reg = <0x30000000 0x50000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x30000000 0x50000>;
+
+        cpu_bpmp_tx: sram@4e000 {
+            reg = <0x4e000 0x1000>;
+            label = "cpu-bpmp-tx";
+            pool;
+        };
+
+        cpu_bpmp_rx: sram@4f000 {
+            reg = <0x4f000 0x1000>;
+            label = "cpu-bpmp-rx";
+            pool;
+        };
+    };
+
+    bpmp {
+        compatible = "nvidia,tegra186-bpmp";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+        interconnect-names = "read", "write", "dma-mem", "dma-write";
+        iommus = <&smmu TEGRA186_SID_BPMP>;
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>;
+        shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
+        #clock-cells = <1>;
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+
+        i2c {
+            compatible = "nvidia,tegra186-bpmp-i2c";
+            nvidia,bpmp-bus-id = <5>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        thermal {
+            compatible = "nvidia,tegra186-bpmp-thermal";
+            #thermal-sensor-cells = <1>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+    bpmp {
+        compatible = "nvidia,tegra186-bpmp";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+        interconnect-names = "read", "write", "dma-mem", "dma-write";
+        mboxes = <&hsp_top1 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>;
+        memory-region = <&dram_cpu_bpmp_mail>;
+        #clock-cells = <1>;
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.yaml b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.yaml
new file mode 100644
index 000000000000..a96fc6cce502
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2024 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/nxp,imx95-scmi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX System Control and Management Interface (SCMI) Pinctrl Protocol
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+allOf:
+  - $ref: /schemas/pinctrl/pinctrl.yaml
+
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    unevaluatedProperties: false
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx95-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin.
+          Please refer to i.MX95 Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+    required:
+      - fsl,pins
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
new file mode 100644
index 000000000000..7a5a02da2719
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2024 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/nxp,imx95-scmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX95 System Control and Management Interface(SCMI) Vendor Protocols Extension
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  protocol@80:
+    description:
+      SCMI LMM protocol which is for boot, shutdown, and reset of other logical
+      machines (LM). It is usually used to allow one LM to manage another used
+      as an offload or accelerator engine.
+    $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x80
+
+  protocol@81:
+    type: object
+    allOf:
+      - $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
+      - $ref: /schemas/input/input.yaml#
+    additionalProperties: false
+
+    properties:
+      reg:
+        const: 0x81
+
+      linux,code:
+        default: 116  # KEY_POWER
+
+  protocol@82:
+    description:
+      SCMI CPU Protocol which allows an agent to start or stop a CPU. It is
+      used to manage auxiliary CPUs in a LM.
+    $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x82
+
+  protocol@84:
+    $ref: '/schemas/firmware/arm,scmi.yaml#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x84
+
+      nxp,ctrl-ids:
+        description:
+          Each entry consists of 2 integers, represents the ctrl id and the value
+        items:
+          items:
+            - description: the ctrl id index
+              enum: [0, 1, 2, 3, 4, 5, 6, 7, 0x8000, 0x8001, 0x8002, 0x8003,
+                     0x8004, 0x8005, 0x8006, 0x8007]
+            - description: the value assigned to the ctrl id
+        minItems: 1
+        maxItems: 16
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
deleted file mode 100644
index d7e3cda8924e..000000000000
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-QCOM Secure Channel Manager (SCM)
-
-Qualcomm processors include an interface to communicate to the secure firmware.
-This interface allows for clients to request different types of actions.  These
-can include CPU power up/down, HDCP requests, loading of firmware, and other
-assorted actions.
-
-Required properties:
-- compatible: must contain one of the following:
- * "qcom,scm-apq8064"
- * "qcom,scm-apq8084"
- * "qcom,scm-ipq4019"
- * "qcom,scm-ipq806x"
- * "qcom,scm-ipq8074"
- * "qcom,scm-mdm9607"
- * "qcom,scm-msm8226"
- * "qcom,scm-msm8660"
- * "qcom,scm-msm8916"
- * "qcom,scm-msm8953"
- * "qcom,scm-msm8960"
- * "qcom,scm-msm8974"
- * "qcom,scm-msm8994"
- * "qcom,scm-msm8996"
- * "qcom,scm-msm8998"
- * "qcom,scm-sc7180"
- * "qcom,scm-sc7280"
- * "qcom,scm-sdm845"
- * "qcom,scm-sdx55"
- * "qcom,scm-sm8150"
- * "qcom,scm-sm8250"
- * "qcom,scm-sm8350"
- and:
- * "qcom,scm"
-- clocks: Specifies clocks needed by the SCM interface, if any:
- * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
-   "qcom,scm-msm8960"
- * core, iface and bus clocks required for "qcom,scm-apq8084",
-   "qcom,scm-msm8916", "qcom,scm-msm8953" and "qcom,scm-msm8974"
-- clock-names: Must contain "core" for the core clock, "iface" for the interface
-  clock and "bus" for the bus clock per the requirements of the compatible.
-- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
-		   download mode control register (optional)
-
-Example for MSM8916:
-
-	firmware {
-		scm {
-			compatible = "qcom,msm8916", "qcom,scm";
-			clocks = <&gcc GCC_CRYPTO_CLK> ,
-				 <&gcc GCC_CRYPTO_AXI_CLK>,
-				 <&gcc GCC_CRYPTO_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
new file mode 100644
index 000000000000..d66459f1d84e
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -0,0 +1,245 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qcom,scm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM Secure Channel Manager (SCM)
+
+description: |
+  Qualcomm processors include an interface to communicate to the secure firmware.
+  This interface allows for clients to request different types of actions.
+  These can include CPU power up/down, HDCP requests, loading of firmware,
+  and other assorted actions.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Robert Marko <robimarko@gmail.com>
+  - Guru Das Srinagesh <quic_gurus@quicinc.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,scm-apq8064
+          - qcom,scm-apq8084
+          - qcom,scm-glymur
+          - qcom,scm-ipq4019
+          - qcom,scm-ipq5018
+          - qcom,scm-ipq5332
+          - qcom,scm-ipq5424
+          - qcom,scm-ipq6018
+          - qcom,scm-ipq806x
+          - qcom,scm-ipq8074
+          - qcom,scm-ipq9574
+          - qcom,scm-kaanapali
+          - qcom,scm-mdm9607
+          - qcom,scm-milos
+          - qcom,scm-msm8226
+          - qcom,scm-msm8660
+          - qcom,scm-msm8916
+          - qcom,scm-msm8937
+          - qcom,scm-msm8953
+          - qcom,scm-msm8960
+          - qcom,scm-msm8974
+          - qcom,scm-msm8976
+          - qcom,scm-msm8994
+          - qcom,scm-msm8996
+          - qcom,scm-msm8998
+          - qcom,scm-qcm2290
+          - qcom,scm-qcs615
+          - qcom,scm-qcs8300
+          - qcom,scm-qdu1000
+          - qcom,scm-sa8255p
+          - qcom,scm-sa8775p
+          - qcom,scm-sar2130p
+          - qcom,scm-sc7180
+          - qcom,scm-sc7280
+          - qcom,scm-sc8180x
+          - qcom,scm-sc8280xp
+          - qcom,scm-sdm670
+          - qcom,scm-sdm845
+          - qcom,scm-sdx55
+          - qcom,scm-sdx65
+          - qcom,scm-sdx75
+          - qcom,scm-sm6115
+          - qcom,scm-sm6125
+          - qcom,scm-sm6350
+          - qcom,scm-sm6375
+          - qcom,scm-sm7150
+          - qcom,scm-sm8150
+          - qcom,scm-sm8250
+          - qcom,scm-sm8350
+          - qcom,scm-sm8450
+          - qcom,scm-sm8550
+          - qcom,scm-sm8650
+          - qcom,scm-sm8750
+          - qcom,scm-qcs404
+          - qcom,scm-x1e80100
+      - const: qcom,scm
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  dma-coherent: true
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+  interrupts:
+    description:
+      The wait-queue interrupt that firmware raises as part of handshake
+      protocol to handle sleeping SCM calls.
+    maxItems: 1
+
+  memory-region:
+    description:
+      Phandle to the memory region reserved for the shared memory bridge to TZ.
+    maxItems: 1
+
+  qcom,sdi-enabled:
+    description:
+      Indicates that the SDI (Secure Debug Image) has been enabled by TZ
+      by default and it needs to be disabled.
+      If not disabled WDT assertion or reboot will cause the board to hang
+      in the debug mode.
+    type: boolean
+
+  qcom,dload-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the download mode control register
+    description: TCSR hardware block
+
+allOf:
+  # Clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8064
+              - qcom,scm-apq8084
+              - qcom,scm-mdm9607
+              - qcom,scm-msm8226
+              - qcom,scm-msm8660
+              - qcom,scm-msm8916
+              - qcom,scm-msm8937
+              - qcom,scm-msm8953
+              - qcom,scm-msm8960
+              - qcom,scm-msm8974
+              - qcom,scm-msm8976
+              - qcom,scm-qcm2290
+              - qcom,scm-sm6375
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clock-names: false
+        clocks: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8064
+              - qcom,scm-msm8660
+              - qcom,scm-msm8960
+              - qcom,scm-qcm2290
+              - qcom,scm-sm6375
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8084
+              - qcom,scm-mdm9607
+              - qcom,scm-msm8226
+              - qcom,scm-msm8916
+              - qcom,scm-msm8937
+              - qcom,scm-msm8953
+              - qcom,scm-msm8974
+              - qcom,scm-msm8976
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+            - const: bus
+            - const: iface
+
+        clocks:
+          minItems: 3
+          maxItems: 3
+
+  # Interrupts
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,scm-kaanapali
+                - qcom,scm-milos
+                - qcom,scm-sm8450
+                - qcom,scm-sm8550
+                - qcom,scm-sm8650
+                - qcom,scm-sm8750
+    then:
+      properties:
+        interrupts: false
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,scm-sa8255p
+                - qcom,scm-sa8775p
+    then:
+      properties:
+        memory-region: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    firmware {
+        scm {
+            compatible = "qcom,scm-msm8916", "qcom,scm";
+            clocks = <&gcc GCC_CRYPTO_CLK>,
+                     <&gcc GCC_CRYPTO_AXI_CLK>,
+                     <&gcc GCC_CRYPTO_AHB_CLK>;
+            clock-names = "core", "bus", "iface";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
new file mode 100644
index 000000000000..c6fc1d6e25da
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qemu,fw-cfg-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QEMU Firmware Configuration
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  Various QEMU emulation / virtualization targets provide the following
+  Firmware Configuration interface on the "virt" machine type:
+
+  - A write-only, 16-bit wide selector (or control) register,
+  - a read-write, 64-bit wide data register.
+
+  QEMU exposes the control and data register to guests as memory mapped
+  registers; their location is communicated to the guest's UEFI firmware in the
+  DTB that QEMU places at the bottom of the guest's DRAM.
+
+  The authoritative guest-side hardware interface documentation to the fw_cfg
+  device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
+
+properties:
+  compatible:
+    const: qemu,fw-cfg-mmio
+
+  reg:
+    maxItems: 1
+    description: |
+      * Bytes 0x0 to 0x7 cover the data register.
+      * Bytes 0x8 to 0x9 cover the selector register.
+      * Further registers may be appended to the region in case of future interface
+        revisions / feature bits.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    fw-cfg@9020000 {
+        compatible = "qemu,fw-cfg-mmio";
+        reg = <0x9020000 0xa>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml b/Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml
new file mode 100644
index 000000000000..3365124c7fd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/thead,th1520-aon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-HEAD TH1520 AON (Always-On) Firmware
+
+description: |
+  The Always-On (AON) subsystem in the TH1520 SoC is responsible for managing
+  low-power states, system wakeup events, and power management tasks. It is
+  designed to operate independently in a dedicated power domain, allowing it to
+  remain functional even during the SoC's deep sleep states.
+
+  At the heart of the AON subsystem is the E902, a low-power core that executes
+  firmware responsible for coordinating tasks such as power domain control,
+  clock management, and system wakeup signaling. Communication between the main
+  SoC and the AON subsystem is handled through a mailbox interface, which
+  enables message-based interactions with the AON firmware.
+
+maintainers:
+  - Michal Wilczynski <m.wilczynski@samsung.com>
+
+properties:
+  compatible:
+    const: thead,th1520-aon
+
+  mboxes:
+    maxItems: 1
+
+  mbox-names:
+    items:
+      - const: aon
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: gpu-clkgen
+
+  "#power-domain-cells":
+    const: 1
+
+required:
+  - compatible
+  - mboxes
+  - mbox-names
+  - "#power-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    aon: aon {
+        compatible = "thead,th1520-aon";
+        mboxes = <&mbox_910t 1>;
+        mbox-names = "aon";
+        #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
index f14f7b454f07..ab8f32c440df 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx firmware driver
 
 maintainers:
-  - Nava kishore Manne <nava.manne@xilinx.com>
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
 
 description: The zynqmp-firmware node describes the interface to platform
   firmware. ZynqMP has an interface to communicate with secure firmware.
@@ -26,6 +26,12 @@ properties:
       - description: For implementations complying for Versal.
         const: xlnx,versal-firmware
 
+      - description: For implementations complying for Versal NET.
+        items:
+          - enum:
+              - xlnx,versal-net-firmware
+          - const: xlnx,versal-firmware
+
   method:
     description: |
                  The method of calling the PM-API firmware layer.
@@ -38,7 +44,56 @@ properties:
       - smc
       - hvc
 
-  versal_fpga:
+  "#power-domain-cells":
+    const: 1
+
+  clock-controller:
+    $ref: /schemas/clock/xlnx,versal-clk.yaml#
+    description: The clock controller is a hardware block of Xilinx versal
+      clock tree. It reads required input clock frequencies from the devicetree
+      and acts as clock provider for all clock consumers of PS clocks.list of
+      clock specifiers which are external input clocks to the given clock
+      controller.
+    type: object
+
+  gpio:
+    $ref: /schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#
+    description: The gpio node describes connect to PS_MODE pins via firmware
+      interface.
+    type: object
+
+  soc-nvmem:
+    $ref: /schemas/nvmem/xlnx,zynqmp-nvmem.yaml#
+    description: The ZynqMP MPSoC provides access to the hardware related data
+      like SOC revision, IDCODE and specific purpose efuses.
+    type: object
+
+  pcap:
+    $ref: /schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml
+    description: The ZynqMP SoC uses the PCAP (Processor Configuration Port) to
+      configure the Programmable Logic (PL). The configuration uses the
+      firmware interface.
+    type: object
+
+  pinctrl:
+    $ref: /schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
+    description: The pinctrl node provides access to pinconfig and pincontrol
+      functionality available in firmware.
+    type: object
+
+  power-management:
+    $ref: /schemas/power/reset/xlnx,zynqmp-power.yaml#
+    description: The zynqmp-power node describes the power management
+      configurations. It will control remote suspend/shutdown interfaces.
+    type: object
+
+  reset-controller:
+    $ref: /schemas/reset/xlnx,zynqmp-reset.yaml#
+    description: The reset-controller node describes connection to the reset
+      functionality via firmware interface.
+    type: object
+
+  versal-fpga:
     $ref: /schemas/fpga/xlnx,versal-fpga.yaml#
     description: Compatible of the FPGA device.
     type: object
@@ -50,15 +105,6 @@ properties:
       vector.
     type: object
 
-  clock-controller:
-    $ref: /schemas/clock/xlnx,versal-clk.yaml#
-    description: The clock controller is a hardware block of Xilinx versal
-      clock tree. It reads required input clock frequencies from the devicetree
-      and acts as clock provider for all clock consumers of PS clocks.list of
-      clock specifiers which are external input clocks to the given clock
-      controller.
-    type: object
-
 required:
   - compatible
 
@@ -66,11 +112,53 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    firmware {
+      zynqmp_firmware: zynqmp-firmware {
+        #power-domain-cells = <1>;
+        soc-nvmem {
+          compatible = "xlnx,zynqmp-nvmem-fw";
+          nvmem-layout {
+            compatible = "fixed-layout";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            soc_revision: soc-revision@0 {
+                reg = <0x0 0x4>;
+            };
+          };
+        };
+        gpio {
+          compatible = "xlnx,zynqmp-gpio-modepin";
+          gpio-controller;
+          #gpio-cells = <2>;
+        };
+        pcap {
+          compatible = "xlnx,zynqmp-pcap-fpga";
+        };
+        pinctrl {
+          compatible = "xlnx,zynqmp-pinctrl";
+        };
+        power-management {
+          compatible = "xlnx,zynqmp-power";
+          interrupts = <0 35 4>;
+        };
+        reset-controller {
+          compatible = "xlnx,zynqmp-reset";
+          #reset-cells = <1>;
+        };
+      };
+    };
+
+    sata {
+      power-domains = <&zynqmp_firmware PD_SATA>;
+    };
+
     versal-firmware {
       compatible = "xlnx,versal-firmware";
       method = "smc";
 
-      versal_fpga: versal_fpga {
+      versal_fpga: versal-fpga {
         compatible = "xlnx,versal-fpga";
       };
 
@@ -81,8 +169,8 @@ examples:
       versal_clk: clock-controller {
         #clock-cells = <1>;
         compatible = "xlnx,versal-clk";
-        clocks = <&ref>, <&alt_ref>, <&pl_alt_ref>;
-        clock-names = "ref", "alt_ref", "pl_alt_ref";
+        clocks = <&ref>, <&pl_alt_ref>;
+        clock-names = "ref", "pl_alt_ref";
       };
     };
 
diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
deleted file mode 100644
index 5dd0ff0f7b4e..000000000000
--- a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Altera FPGA To SDRAM Bridge Driver
-
-Required properties:
-- compatible		: Should contain "altr,socfpga-fpga2sdram-bridge"
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-	fpga_bridge3: fpga-bridge@ffc25080 {
-		compatible = "altr,socfpga-fpga2sdram-bridge";
-		reg = <0xffc25080 0x4>;
-		bridge-enable = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
deleted file mode 100644
index 8b26fbcff3c6..000000000000
--- a/Documentation/devicetree/bindings/fpga/altera-freeze-bridge.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Altera Freeze Bridge Controller Driver
-
-The Altera Freeze Bridge Controller manages one or more freeze bridges.
-The controller can freeze/disable the bridges which prevents signal
-changes from passing through the bridge.  The controller can also
-unfreeze/enable the bridges which allows traffic to pass through the
-bridge normally.
-
-Required properties:
-- compatible		: Should contain "altr,freeze-bridge-controller"
-- regs			: base address and size for freeze bridge module
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-	freeze-controller@100000450 {
-		compatible = "altr,freeze-bridge-controller";
-		regs = <0x1000 0x10>;
-		bridge-enable = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
deleted file mode 100644
index 68cce3945b10..000000000000
--- a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Altera FPGA/HPS Bridge Driver
-
-Required properties:
-- regs		: base address and size for AXI bridge module
-- compatible	: Should contain one of:
-		  "altr,socfpga-lwhps2fpga-bridge",
-		  "altr,socfpga-hps2fpga-bridge", or
-		  "altr,socfpga-fpga2hps-bridge"
-- resets	: Phandle and reset specifier for this bridge's reset
-- clocks	: Clocks used by this module.
-
-See Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-	fpga_bridge0: fpga-bridge@ff400000 {
-		compatible = "altr,socfpga-lwhps2fpga-bridge";
-		reg = <0xff400000 0x100000>;
-		resets = <&rst LWHPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-		bridge-enable = <0>;
-	};
-
-	fpga_bridge1: fpga-bridge@ff500000 {
-		compatible = "altr,socfpga-hps2fpga-bridge";
-		reg = <0xff500000 0x10000>;
-		resets = <&rst HPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-		bridge-enable = <1>;
-	};
-
-	fpga_bridge2: fpga-bridge@ff600000 {
-		compatible = "altr,socfpga-fpga2hps-bridge";
-		reg = <0xff600000 0x100000>;
-		resets = <&rst FPGA2HPS_RESET>;
-		clocks = <&l4_main_clk>;
-	};
diff --git a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt b/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
deleted file mode 100644
index 48478bc07e29..000000000000
--- a/Documentation/devicetree/bindings/fpga/altera-passive-serial.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Altera Passive Serial SPI FPGA Manager
-
-Altera FPGAs support a method of loading the bitstream over what is
-referred to as "passive serial".
-The passive serial link is not technically SPI, and might require extra
-circuits in order to play nicely with other SPI slaves on the same bus.
-
-See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
-
-Required properties:
-- compatible: Must be one of the following:
-	"altr,fpga-passive-serial",
-	"altr,fpga-arria10-passive-serial"
-- reg: SPI chip select of the FPGA
-- nconfig-gpios: config pin (referred to as nCONFIG in the manual)
-- nstat-gpios: status pin (referred to as nSTATUS in the manual)
-
-Optional properties:
-- confd-gpios: confd pin (referred to as CONF_DONE in the manual)
-
-Example:
-	fpga: fpga@0 {
-		compatible = "altr,fpga-passive-serial";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
-		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
-		confd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml
new file mode 100644
index 000000000000..ffb7cc54556f
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altr,fpga-passive-serial.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,fpga-passive-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Passive Serial SPI FPGA Manager
+
+maintainers:
+  - Fabio Estevam <festevam@denx.de>
+
+description: |
+  Altera FPGAs support a method of loading the bitstream over what is
+  referred to as "passive serial".
+  The passive serial link is not technically SPI, and might require extra
+  circuits in order to play nicely with other SPI slaves on the same bus.
+
+  See https://www.altera.com/literature/hb/cyc/cyc_c51013.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - altr,fpga-passive-serial
+      - altr,fpga-arria10-passive-serial
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  reg:
+    maxItems: 1
+
+  nconfig-gpios:
+    description:
+      Config pin (referred to as nCONFIG in the manual).
+    maxItems: 1
+
+  nstat-gpios:
+    description:
+      Status pin (referred to as nSTATUS in the manual).
+    maxItems: 1
+
+  confd-gpios:
+    description:
+      confd pin (referred to as CONF_DONE in the manual)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - nconfig-gpios
+  - nstat-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      fpga@0 {
+        compatible = "altr,fpga-passive-serial";
+        reg = <0>;
+        nconfig-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+        nstat-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+        confd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/fpga/altr,freeze-bridge-controller.yaml b/Documentation/devicetree/bindings/fpga/altr,freeze-bridge-controller.yaml
new file mode 100644
index 000000000000..fccffeebb256
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altr,freeze-bridge-controller.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,freeze-bridge-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Freeze Bridge Controller
+
+description:
+  The Altera Freeze Bridge Controller manages one or more freeze bridges.
+  The controller can freeze/disable the bridges which prevents signal
+  changes from passing through the bridge. The controller can also
+  unfreeze/enable the bridges which allows traffic to pass through the bridge
+  normally.
+
+maintainers:
+  - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+  - $ref: fpga-bridge.yaml#
+
+properties:
+  compatible:
+    const: altr,freeze-bridge-controller
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fpga-bridge@100000450 {
+        compatible = "altr,freeze-bridge-controller";
+        reg = <0x1000 0x10>;
+        bridge-enable = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml b/Documentation/devicetree/bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml
new file mode 100644
index 000000000000..22b58453c5ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altr,socfpga-fpga2sdram-bridge.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,socfpga-fpga2sdram-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera FPGA To SDRAM Bridge
+
+maintainers:
+  - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+  - $ref: fpga-bridge.yaml#
+
+properties:
+  compatible:
+    const: altr,socfpga-fpga2sdram-bridge
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fpga-bridge@ffc25080 {
+        compatible = "altr,socfpga-fpga2sdram-bridge";
+        reg = <0xffc25080 0x4>;
+        bridge-enable = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml b/Documentation/devicetree/bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml
new file mode 100644
index 000000000000..d19c6660d6c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altr,socfpga-hps2fpga-bridge.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/altr,socfpga-hps2fpga-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera FPGA/HPS Bridge
+
+maintainers:
+  - Xu Yilun <yilun.xu@intel.com>
+
+allOf:
+  - $ref: fpga-bridge.yaml#
+
+properties:
+  compatible:
+    enum:
+      - altr,socfpga-lwhps2fpga-bridge
+      - altr,socfpga-hps2fpga-bridge
+      - altr,socfpga-fpga2hps-bridge
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/altr,rst-mgr.h>
+
+    fpga-bridge@ff400000 {
+      compatible = "altr,socfpga-lwhps2fpga-bridge";
+      reg = <0xff400000 0x100000>;
+      bridge-enable = <0>;
+      clocks = <&l4_main_clk>;
+      resets = <&rst LWHPS2FPGA_RESET>;
+    };
diff --git a/Documentation/devicetree/bindings/fpga/fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/fpga-bridge.txt
deleted file mode 100644
index 72e06917288a..000000000000
--- a/Documentation/devicetree/bindings/fpga/fpga-bridge.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-FPGA Bridge Device Tree Binding
-
-Optional properties:
-- bridge-enable		: 0 if driver should disable bridge at startup
-			  1 if driver should enable bridge at startup
-			  Default is to leave bridge in current state.
-
-Example:
-	fpga_bridge3: fpga-bridge@ffc25080 {
-		compatible = "altr,socfpga-fpga2sdram-bridge";
-		reg = <0xffc25080 0x4>;
-		bridge-enable = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/fpga/fpga-bridge.yaml b/Documentation/devicetree/bindings/fpga/fpga-bridge.yaml
new file mode 100644
index 000000000000..1ccb2aa18726
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/fpga-bridge.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/fpga-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FPGA Bridge
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+properties:
+  $nodename:
+    pattern: "^fpga-bridge(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  bridge-enable:
+    description: |
+      0 if driver should disable bridge at startup
+      1 if driver should enable bridge at startup
+      Default is to leave bridge in current state.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+
+additionalProperties: true
+
+examples:
+  - |
+    fpga-bridge {
+        bridge-enable = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
deleted file mode 100644
index 7d3515264838..000000000000
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ /dev/null
@@ -1,479 +0,0 @@
-FPGA Region Device Tree Binding
-
-Alan Tull 2016
-
- CONTENTS
- - Introduction
- - Terminology
- - Sequence
- - FPGA Region
- - Supported Use Models
- - Device Tree Examples
- - Constraints
-
-
-Introduction
-============
-
-FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
-the Device Tree.  FPGA Regions provide a way to program FPGAs under device tree
-control.
-
-This device tree binding document hits some of the high points of FPGA usage and
-attempts to include terminology used by both major FPGA manufacturers.  This
-document isn't a replacement for any manufacturers specifications for FPGA
-usage.
-
-
-Terminology
-===========
-
-Full Reconfiguration
- * The entire FPGA is programmed.
-
-Partial Reconfiguration (PR)
- * A section of an FPGA is reprogrammed while the rest of the FPGA is not
-   affected.
- * Not all FPGA's support PR.
-
-Partial Reconfiguration Region (PRR)
- * Also called a "reconfigurable partition"
- * A PRR is a specific section of an FPGA reserved for reconfiguration.
- * A base (or static) FPGA image may create a set of PRR's that later may
-   be independently reprogrammed many times.
- * The size and specific location of each PRR is fixed.
- * The connections at the edge of each PRR are fixed.  The image that is loaded
-   into a PRR must fit and must use a subset of the region's connections.
- * The busses within the FPGA are split such that each region gets its own
-   branch that may be gated independently.
-
-Persona
- * Also called a "partial bit stream"
- * An FPGA image that is designed to be loaded into a PRR.  There may be
-   any number of personas designed to fit into a PRR, but only one at at time
-   may be loaded.
- * A persona may create more regions.
-
-FPGA Bridge
- * FPGA Bridges gate bus signals between a host and FPGA.
- * FPGA Bridges should be disabled while the FPGA is being programmed to
-   prevent spurious signals on the cpu bus and to the soft logic.
- * FPGA bridges may be actual hardware or soft logic on an FPGA.
- * During Full Reconfiguration, hardware bridges between the host and FPGA
-   will be disabled.
- * During Partial Reconfiguration of a specific region, that region's bridge
-   will be used to gate the busses.  Traffic to other regions is not affected.
- * In some implementations, the FPGA Manager transparantly handles gating the
-   buses, eliminating the need to show the hardware FPGA bridges in the
-   device tree.
- * An FPGA image may create a set of reprogrammable regions, each having its
-   own bridge and its own split of the busses in the FPGA.
-
-FPGA Manager
- * An FPGA Manager is a hardware block that programs an FPGA under the control
-   of a host processor.
-
-Base Image
- * Also called the "static image"
- * An FPGA image that is designed to do full reconfiguration of the FPGA.
- * A base image may set up a set of partial reconfiguration regions that may
-   later be reprogrammed.
-
-    ----------------       ----------------------------------
-    |  Host CPU    |       |             FPGA               |
-    |              |       |                                |
-    |          ----|       |       -----------    --------  |
-    |          | H |       |   |==>| Bridge0 |<==>| PRR0 |  |
-    |          | W |       |   |   -----------    --------  |
-    |          |   |       |   |                            |
-    |          | B |<=====>|<==|   -----------    --------  |
-    |          | R |       |   |==>| Bridge1 |<==>| PRR1 |  |
-    |          | I |       |   |   -----------    --------  |
-    |          | D |       |   |                            |
-    |          | G |       |   |   -----------    --------  |
-    |          | E |       |   |==>| Bridge2 |<==>| PRR2 |  |
-    |          ----|       |       -----------    --------  |
-    |              |       |                                |
-    ----------------       ----------------------------------
-
-Figure 1: An FPGA set up with a base image that created three regions.  Each
-region (PRR0-2) gets its own split of the busses that is independently gated by
-a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
-reprogrammed independently while the rest of the system continues to function.
-
-
-Sequence
-========
-
-When a DT overlay that targets an FPGA Region is applied, the FPGA Region will
-do the following:
-
- 1. Disable appropriate FPGA bridges.
- 2. Program the FPGA using the FPGA manager.
- 3. Enable the FPGA bridges.
- 4. The Device Tree overlay is accepted into the live tree.
- 5. Child devices are populated.
-
-When the overlay is removed, the child nodes will be removed and the FPGA Region
-will disable the bridges.
-
-
-FPGA Region
-===========
-
-FPGA Regions represent FPGA's and FPGA PR regions in the device tree.  An FPGA
-Region brings together the elements needed to program on a running system and
-add the child devices:
-
- * FPGA Manager
- * FPGA Bridges
- * image-specific information needed to to the programming.
- * child nodes
-
-The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
-FPGA while an operating system is running.
-
-An FPGA Region that exists in the live Device Tree reflects the current state.
-If the live tree shows a "firmware-name" property or child nodes under an FPGA
-Region, the FPGA already has been programmed.  A DTO that targets an FPGA Region
-and adds the "firmware-name" property is taken as a request to reprogram the
-FPGA.  After reprogramming is successful, the overlay is accepted into the live
-tree.
-
-The base FPGA Region in the device tree represents the FPGA and supports full
-reconfiguration.  It must include a phandle to an FPGA Manager.  The base
-FPGA region will be the child of one of the hardware bridges (the bridge that
-allows register access) between the cpu and the FPGA.  If there are more than
-one bridge to control during FPGA programming, the region will also contain a
-list of phandles to the additional hardware FPGA Bridges.
-
-For partial reconfiguration (PR), each PR region will have an FPGA Region.
-These FPGA regions are children of FPGA bridges which are then children of the
-base FPGA region.  The "Full Reconfiguration to add PRR's" example below shows
-this.
-
-If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA
-Manager specified by its ancestor FPGA Region.  This supports both the case
-where the same FPGA Manager is used for all of an FPGA as well the case where
-a different FPGA Manager is used for each region.
-
-FPGA Regions do not inherit their ancestor FPGA regions' bridges.  This prevents
-shutting down bridges that are upstream from the other active regions while one
-region is getting reconfigured (see Figure 1 above).  During PR, the FPGA's
-hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
-within the static image of the FPGA.
-
-Required properties:
-- compatible : should contain "fpga-region"
-- fpga-mgr : should contain a phandle to an FPGA Manager.  Child FPGA Regions
-	inherit this property from their ancestor regions.  An fpga-mgr property
-	in a region will override any inherited FPGA manager.
-- #address-cells, #size-cells, ranges : must be present to handle address space
-	mapping for child nodes.
-
-Optional properties:
-- firmware-name : should contain the name of an FPGA image file located on the
-	firmware search path.  If this property shows up in a live device tree
-	it indicates that the FPGA has already been programmed with this image.
-	If this property is in an overlay targeting an FPGA region, it is a
-	request to program the FPGA with that image.
-- fpga-bridges : should contain a list of phandles to FPGA Bridges that must be
-	controlled during FPGA programming along with the parent FPGA bridge.
-	This property is optional if the FPGA Manager handles the bridges.
-        If the fpga-region is  the child of an fpga-bridge, the list should not
-        contain the parent bridge.
-- partial-fpga-config : boolean, set if partial reconfiguration is to be done,
-	otherwise full reconfiguration is done.
-- external-fpga-config : boolean, set if the FPGA has already been configured
-	prior to OS boot up.
-- encrypted-fpga-config : boolean, set if the bitstream is encrypted
-- region-unfreeze-timeout-us : The maximum time in microseconds to wait for
-	bridges to successfully become enabled after the region has been
-	programmed.
-- region-freeze-timeout-us : The maximum time in microseconds to wait for
-	bridges to successfully become disabled before the region has been
-	programmed.
-- config-complete-timeout-us : The maximum time in microseconds time for the
-	FPGA to go to operating mode after the region has been programmed.
-- child nodes : devices in the FPGA after programming.
-
-In the example below, when an overlay is applied targeting fpga-region0,
-fpga_mgr is used to program the FPGA.  Two bridges are controlled during
-programming: the parent fpga_bridge0 and fpga_bridge1.  Because the region is
-the child of fpga_bridge0, only fpga_bridge1 needs to be specified in the
-fpga-bridges property.  During programming, these bridges are disabled, the
-firmware specified in the overlay is loaded to the FPGA using the FPGA manager
-specified in the region.  If FPGA programming succeeds, the bridges are
-reenabled and the overlay makes it into the live device tree.  The child devices
-are then populated.  If FPGA programming fails, the bridges are left disabled
-and the overlay is rejected.  The overlay's ranges property maps the lwhps
-bridge's region (0xff200000) and the hps bridge's region (0xc0000000) for use by
-the two child devices.
-
-Example:
-Base tree contains:
-
-	fpga_mgr: fpga-mgr@ff706000 {
-		compatible = "altr,socfpga-fpga-mgr";
-		reg = <0xff706000 0x1000
-		       0xffb90000 0x20>;
-		interrupts = <0 175 4>;
-	};
-
-	fpga_bridge0: fpga-bridge@ff400000 {
-		compatible = "altr,socfpga-lwhps2fpga-bridge";
-		reg = <0xff400000 0x100000>;
-		resets = <&rst LWHPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		fpga_region0: fpga-region0 {
-			compatible = "fpga-region";
-			fpga-mgr = <&fpga_mgr>;
-		};
-	};
-
-	fpga_bridge1: fpga-bridge@ff500000 {
-		compatible = "altr,socfpga-hps2fpga-bridge";
-		reg = <0xff500000 0x10000>;
-		resets = <&rst HPS2FPGA_RESET>;
-		clocks = <&l4_main_clk>;
-	};
-
-Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "soc_system.rbf";
-	fpga-bridges = <&fpga_bridge1>;
-	ranges = <0x20000 0xff200000 0x100000>,
-		 <0x0 0xc0000000 0x20000000>;
-
-	gpio@10040 {
-		compatible = "altr,pio-1.0";
-		reg = <0x10040 0x20>;
-		altr,ngpio = <4>;
-		#gpio-cells = <2>;
-		clocks = <2>;
-		gpio-controller;
-	};
-
-	onchip-memory {
-		device_type = "memory";
-		compatible = "altr,onchipmem-15.1";
-		reg = <0x0 0x10000>;
-	};
-};
-
-
-Supported Use Models
-====================
-
-In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
-a FPGA Region.  The target of the Device Tree Overlay is the FPGA Region.  Some
-uses are specific to an FPGA device.
-
- * No FPGA Bridges
-   In this case, the FPGA Manager which programs the FPGA also handles the
-   bridges behind the scenes.  No FPGA Bridge devices are needed for full
-   reconfiguration.
-
- * Full reconfiguration with hardware bridges
-   In this case, there are hardware bridges between the processor and FPGA that
-   need to be controlled during full reconfiguration.  Before the overlay is
-   applied, the live DT must include the FPGA Manager, FPGA Bridges, and a
-   FPGA Region.  The FPGA Region is the child of the bridge that allows
-   register access to the FPGA.  Additional bridges may be listed in a
-   fpga-bridges property in the FPGA region or in the device tree overlay.
-
- * Partial reconfiguration with bridges in the FPGA
-   In this case, the FPGA will have one or more PRR's that may be programmed
-   separately while the rest of the FPGA can remain active.  To manage this,
-   bridges need to exist in the FPGA that can gate the buses going to each FPGA
-   region while the buses are enabled for other sections.  Before any partial
-   reconfiguration can be done, a base FPGA image must be loaded which includes
-   PRR's with FPGA bridges.  The device tree should have an FPGA region for each
-   PRR.
-
-Device Tree Examples
-====================
-
-The intention of this section is to give some simple examples, focusing on
-the placement of the elements detailed above, especially:
- * FPGA Manager
- * FPGA Bridges
- * FPGA Region
- * ranges
- * target-path or target
-
-For the purposes of this section, I'm dividing the Device Tree into two parts,
-each with its own requirements.  The two parts are:
- * The live DT prior to the overlay being added
- * The DT overlay
-
-The live Device Tree must contain an FPGA Region, an FPGA Manager, and any FPGA
-Bridges.  The FPGA Region's "fpga-mgr" property specifies the manager by phandle
-to handle programming the FPGA.  If the FPGA Region is the child of another FPGA
-Region, the parent's FPGA Manager is used.  If FPGA Bridges need to be involved,
-they are specified in the FPGA Region by the "fpga-bridges" property.  During
-FPGA programming, the FPGA Region will disable the bridges that are in its
-"fpga-bridges" list and will re-enable them after FPGA programming has
-succeeded.
-
-The Device Tree Overlay will contain:
- * "target-path" or "target"
-   The insertion point where the the contents of the overlay will go into the
-   live tree.  target-path is a full path, while target is a phandle.
- * "ranges"
-    The address space mapping from processor to FPGA bus(ses).
- * "firmware-name"
-   Specifies the name of the FPGA image file on the firmware search
-   path.  The search path is described in the firmware class documentation.
- * "partial-fpga-config"
-   This binding is a boolean and should be present if partial reconfiguration
-   is to be done.
- * child nodes corresponding to hardware that will be loaded in this region of
-   the FPGA.
-
-Device Tree Example: Full Reconfiguration without Bridges
-=========================================================
-
-Live Device Tree contains:
-	fpga_mgr0: fpga-mgr@f8007000 {
-		compatible = "xlnx,zynq-devcfg-1.0";
-		reg = <0xf8007000 0x100>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 8 4>;
-		clocks = <&clkc 12>;
-		clock-names = "ref_clk";
-		syscon = <&slcr>;
-	};
-
-	fpga_region0: fpga-region0 {
-		compatible = "fpga-region";
-		fpga-mgr = <&fpga_mgr0>;
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-	};
-
-DT Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "zynq-gpio.bin";
-
-	gpio1: gpio@40000000 {
-		compatible = "xlnx,xps-gpio-1.00.a";
-		reg = <0x40000000 0x10000>;
-		gpio-controller;
-		#gpio-cells = <0x2>;
-		xlnx,gpio-width= <0x6>;
-	};
-};
-
-Device Tree Example: Full Reconfiguration to add PRR's
-======================================================
-
-The base FPGA Region is specified similar to the first example above.
-
-This example programs the FPGA to have two regions that can later be partially
-configured.  Each region has its own bridge in the FPGA fabric.
-
-DT Overlay contains:
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "base.rbf";
-
-	fpga-bridge@4400 {
-		compatible = "altr,freeze-bridge-controller";
-		reg = <0x4400 0x10>;
-
-		fpga_region1: fpga-region1 {
-			compatible = "fpga-region";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges;
-		};
-	};
-
-	fpga-bridge@4420 {
-		compatible = "altr,freeze-bridge-controller";
-		reg = <0x4420 0x10>;
-
-		fpga_region2: fpga-region2 {
-			compatible = "fpga-region";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges;
-		};
-	};
-};
-
-Device Tree Example: Partial Reconfiguration
-============================================
-
-This example reprograms one of the PRR's set up in the previous example.
-
-The sequence that occurs when this overlay is similar to the above, the only
-differences are that the FPGA is partially reconfigured due to the
-"partial-fpga-config" boolean and the only bridge that is controlled during
-programming is the FPGA based bridge of fpga_region1.
-
-/dts-v1/;
-/plugin/;
-
-&fpga_region1 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	firmware-name = "soc_image2.rbf";
-	partial-fpga-config;
-
-	gpio@10040 {
-		compatible = "altr,pio-1.0";
-		reg = <0x10040 0x20>;
-		clocks = <0x2>;
-		altr,ngpio = <0x4>;
-		#gpio-cells = <0x2>;
-		gpio-controller;
-	};
-};
-
-Constraints
-===========
-
-It is beyond the scope of this document to fully describe all the FPGA design
-constraints required to make partial reconfiguration work[1] [2] [3], but a few
-deserve quick mention.
-
-A persona must have boundary connections that line up with those of the partion
-or region it is designed to go into.
-
-During programming, transactions through those connections must be stopped and
-the connections must be held at a fixed logic level.  This can be achieved by
-FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
-
---
-[1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf
-[2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
-[3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.yaml b/Documentation/devicetree/bindings/fpga/fpga-region.yaml
new file mode 100644
index 000000000000..55acf0ecfa3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.yaml
@@ -0,0 +1,354 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/fpga-region.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FPGA Region
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  CONTENTS
+   - Introduction
+   - Terminology
+   - Sequence
+   - FPGA Region
+   - Supported Use Models
+   - Constraints
+
+  Introduction
+  ============
+
+  FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in
+  the Device Tree.  FPGA Regions provide a way to program FPGAs under device tree
+  control.
+
+  The documentation hits some of the high points of FPGA usage and
+  attempts to include terminology used by both major FPGA manufacturers.  This
+  document isn't a replacement for any manufacturers specifications for FPGA
+  usage.
+
+  Terminology
+  ===========
+
+  Full Reconfiguration
+   * The entire FPGA is programmed.
+
+  Partial Reconfiguration (PR)
+   * A section of an FPGA is reprogrammed while the rest of the FPGA is not
+     affected.
+   * Not all FPGA's support PR.
+
+  Partial Reconfiguration Region (PRR)
+   * Also called a "reconfigurable partition"
+   * A PRR is a specific section of an FPGA reserved for reconfiguration.
+   * A base (or static) FPGA image may create a set of PRR's that later may
+     be independently reprogrammed many times.
+   * The size and specific location of each PRR is fixed.
+   * The connections at the edge of each PRR are fixed.  The image that is loaded
+     into a PRR must fit and must use a subset of the region's connections.
+   * The busses within the FPGA are split such that each region gets its own
+     branch that may be gated independently.
+
+  Persona
+   * Also called a "partial bit stream"
+   * An FPGA image that is designed to be loaded into a PRR.  There may be
+     any number of personas designed to fit into a PRR, but only one at a time
+     may be loaded.
+   * A persona may create more regions.
+
+  FPGA Bridge
+   * FPGA Bridges gate bus signals between a host and FPGA.
+   * FPGA Bridges should be disabled while the FPGA is being programmed to
+     prevent spurious signals on the cpu bus and to the soft logic.
+   * FPGA bridges may be actual hardware or soft logic on an FPGA.
+   * During Full Reconfiguration, hardware bridges between the host and FPGA
+     will be disabled.
+   * During Partial Reconfiguration of a specific region, that region's bridge
+     will be used to gate the busses.  Traffic to other regions is not affected.
+   * In some implementations, the FPGA Manager transparently handles gating the
+     buses, eliminating the need to show the hardware FPGA bridges in the
+     device tree.
+   * An FPGA image may create a set of reprogrammable regions, each having its
+     own bridge and its own split of the busses in the FPGA.
+
+  FPGA Manager
+   * An FPGA Manager is a hardware block that programs an FPGA under the control
+     of a host processor.
+
+  Base Image
+   * Also called the "static image"
+   * An FPGA image that is designed to do full reconfiguration of the FPGA.
+   * A base image may set up a set of partial reconfiguration regions that may
+     later be reprogrammed.
+
+      ----------------       ----------------------------------
+      |  Host CPU    |       |             FPGA               |
+      |              |       |                                |
+      |          ----|       |       -----------    --------  |
+      |          | H |       |   |==>| Bridge0 |<==>| PRR0 |  |
+      |          | W |       |   |   -----------    --------  |
+      |          |   |       |   |                            |
+      |          | B |<=====>|<==|   -----------    --------  |
+      |          | R |       |   |==>| Bridge1 |<==>| PRR1 |  |
+      |          | I |       |   |   -----------    --------  |
+      |          | D |       |   |                            |
+      |          | G |       |   |   -----------    --------  |
+      |          | E |       |   |==>| Bridge2 |<==>| PRR2 |  |
+      |          ----|       |       -----------    --------  |
+      |              |       |                                |
+      ----------------       ----------------------------------
+
+  Figure 1: An FPGA set up with a base image that created three regions.  Each
+  region (PRR0-2) gets its own split of the busses that is independently gated by
+  a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
+  reprogrammed independently while the rest of the system continues to function.
+
+  Sequence
+  ========
+
+  When a DT overlay that targets an FPGA Region is applied, the FPGA Region will
+  do the following:
+
+   1. Disable appropriate FPGA bridges.
+   2. Program the FPGA using the FPGA manager.
+   3. Enable the FPGA bridges.
+   4. The Device Tree overlay is accepted into the live tree.
+   5. Child devices are populated.
+
+  When the overlay is removed, the child nodes will be removed and the FPGA Region
+  will disable the bridges.
+
+  FPGA Region
+  ===========
+
+  FPGA Regions represent FPGA's and FPGA PR regions in the device tree.  An FPGA
+  Region brings together the elements needed to program on a running system and
+  add the child devices:
+
+   * FPGA Manager
+   * FPGA Bridges
+   * image-specific information needed to the programming.
+   * child nodes
+
+  The intended use is that a Device Tree overlay (DTO) can be used to reprogram an
+  FPGA while an operating system is running.
+
+  An FPGA Region that exists in the live Device Tree reflects the current state.
+  If the live tree shows a "firmware-name" property or child nodes under an FPGA
+  Region, the FPGA already has been programmed.  A DTO that targets an FPGA Region
+  and adds the "firmware-name" property is taken as a request to reprogram the
+  FPGA.  After reprogramming is successful, the overlay is accepted into the live
+  tree.
+
+  The base FPGA Region in the device tree represents the FPGA and supports full
+  reconfiguration.  It must include a phandle to an FPGA Manager.  The base
+  FPGA region will be the child of one of the hardware bridges (the bridge that
+  allows register access) between the cpu and the FPGA.  If there are more than
+  one bridge to control during FPGA programming, the region will also contain a
+  list of phandles to the additional hardware FPGA Bridges.
+
+  For partial reconfiguration (PR), each PR region will have an FPGA Region.
+  These FPGA regions are children of FPGA bridges which are then children of the
+  base FPGA region.  The "Full Reconfiguration to add PRR's" example below shows
+  this.
+
+  If an FPGA Region does not specify an FPGA Manager, it will inherit the FPGA
+  Manager specified by its ancestor FPGA Region.  This supports both the case
+  where the same FPGA Manager is used for all of an FPGA as well the case where
+  a different FPGA Manager is used for each region.
+
+  FPGA Regions do not inherit their ancestor FPGA regions' bridges.  This prevents
+  shutting down bridges that are upstream from the other active regions while one
+  region is getting reconfigured (see Figure 1 above).  During PR, the FPGA's
+  hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
+  within the static image of the FPGA.
+
+  Supported Use Models
+  ====================
+
+  In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and
+  a FPGA Region.  The target of the Device Tree Overlay is the FPGA Region.  Some
+  uses are specific to an FPGA device.
+
+   * No FPGA Bridges
+     In this case, the FPGA Manager which programs the FPGA also handles the
+     bridges behind the scenes.  No FPGA Bridge devices are needed for full
+     reconfiguration.
+
+   * Full reconfiguration with hardware bridges
+     In this case, there are hardware bridges between the processor and FPGA that
+     need to be controlled during full reconfiguration.  Before the overlay is
+     applied, the live DT must include the FPGA Manager, FPGA Bridges, and a
+     FPGA Region.  The FPGA Region is the child of the bridge that allows
+     register access to the FPGA.  Additional bridges may be listed in a
+     fpga-bridges property in the FPGA region or in the device tree overlay.
+
+   * Partial reconfiguration with bridges in the FPGA
+     In this case, the FPGA will have one or more PRR's that may be programmed
+     separately while the rest of the FPGA can remain active.  To manage this,
+     bridges need to exist in the FPGA that can gate the buses going to each FPGA
+     region while the buses are enabled for other sections.  Before any partial
+     reconfiguration can be done, a base FPGA image must be loaded which includes
+     PRR's with FPGA bridges.  The device tree should have an FPGA region for each
+     PRR.
+
+  Constraints
+  ===========
+
+  It is beyond the scope of this document to fully describe all the FPGA design
+  constraints required to make partial reconfiguration work[1] [2] [3], but a few
+  deserve quick mention.
+
+  A persona must have boundary connections that line up with those of the partition
+  or region it is designed to go into.
+
+  During programming, transactions through those connections must be stopped and
+  the connections must be held at a fixed logic level.  This can be achieved by
+  FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration.
+
+  --
+  [1] https://www.intel.com/programmable/technical-pdfs/683404.pdf
+  [2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf
+  [3] https://docs.amd.com/v/u/en-US/ug702
+
+properties:
+  $nodename:
+    pattern: "^fpga-region(@.*|-([0-9]|[1-9][0-9]+))?$"
+
+  compatible:
+    const: fpga-region
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+  "#address-cells": true
+  "#size-cells": true
+
+  config-complete-timeout-us:
+    description:
+      The maximum time in microseconds time for the FPGA to go to operating
+      mode after the region has been programmed.
+
+  encrypted-fpga-config:
+    type: boolean
+    description:
+      Set if the bitstream is encrypted.
+
+  external-fpga-config:
+    type: boolean
+    description:
+      Set if the FPGA has already been configured prior to OS boot up.
+
+  firmware-name:
+    maxItems: 1
+    description:
+      Should contain the name of an FPGA image file located on the firmware
+      search path. If this property shows up in a live device tree it indicates
+      that the FPGA has already been programmed with this image.
+      If this property is in an overlay targeting an FPGA region, it is
+      a request to program the FPGA with that image.
+
+  fpga-bridges:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should contain a list of phandles to FPGA Bridges that must be
+      controlled during FPGA programming along with the parent FPGA bridge.
+      This property is optional if the FPGA Manager handles the bridges.
+      If the fpga-region is  the child of an fpga-bridge, the list should not
+      contain the parent bridge.
+
+  fpga-mgr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Should contain a phandle to an FPGA Manager.  Child FPGA Regions
+      inherit this property from their ancestor regions.  An fpga-mgr property
+      in a region will override any inherited FPGA manager.
+
+  partial-fpga-config:
+    type: boolean
+    description:
+      Set if partial reconfiguration is to be done, otherwise full
+      reconfiguration is done.
+
+  region-freeze-timeout-us:
+    description:
+      The maximum time in microseconds to wait for bridges to successfully
+      become disabled before the region has been programmed.
+
+  region-unfreeze-timeout-us:
+    description:
+      The maximum time in microseconds to wait for bridges to successfully
+      become enabled after the region has been programmed.
+
+required:
+  - compatible
+  - fpga-mgr
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    /*
+     * Full Reconfiguration without Bridges with DT overlay
+     */
+    fpga_region0: fpga-region@0 {
+      compatible = "fpga-region";
+      reg = <0 0>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      fpga-mgr = <&fpga_mgr0>;
+      ranges = <0x10000000 0x20000000 0x10000000>;
+
+      /* DT Overlay contains: &fpga_region0 */
+      firmware-name = "zynq-gpio.bin";
+      gpio@40000000 {
+        compatible = "xlnx,xps-gpio-1.00.a";
+        reg = <0x40000000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        clocks = <&clk>;
+      };
+    };
+
+  - |
+    /*
+     * Partial reconfiguration with bridge
+     */
+    fpga_region1: fpga-region@0 {
+      compatible = "fpga-region";
+      reg = <0 0>;
+      ranges;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      fpga-mgr = <&fpga_mgr1>;
+      fpga-bridges = <&fpga_bridge1>;
+      partial-fpga-config;
+
+      /* DT Overlay contains: &fpga_region1 */
+      firmware-name = "zynq-gpio-partial.bin";
+      clk: clock {
+        compatible = "fixed-factor-clock";
+        clocks = <&parentclk>;
+        #clock-cells = <0>;
+        clock-div = <2>;
+        clock-mult = <1>;
+      };
+      axi {
+        compatible = "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        gpio@40000000 {
+          compatible = "xlnx,xps-gpio-1.00.a";
+          reg = <0x40000000 0x10000>;
+          #gpio-cells = <2>;
+          gpio-controller;
+          clocks = <&clk>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/fpga/intel,stratix10-soc-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/intel,stratix10-soc-fpga-mgr.yaml
new file mode 100644
index 000000000000..6e536d6b28a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/intel,stratix10-soc-fpga-mgr.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/intel,stratix10-soc-fpga-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Stratix10 SoC FPGA Manager
+
+maintainers:
+  - Mahesh Rao <mahesh.rao@altera.com>
+  - Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
+  - Niravkumar L Rabara <nirav.rabara@altera.com>
+
+description:
+  The Intel Stratix10 SoC consists of a 64-bit quad-core ARM Cortex A53 hard
+  processor system (HPS) and a Secure Device Manager (SDM). The Stratix10
+  SoC FPGA Manager driver is used to configure/reconfigure the FPGA fabric
+  on the die.The driver communicates with SDM/ATF via the stratix10-svc
+  platform driver for performing its operations.
+
+properties:
+  compatible:
+    enum:
+      - intel,stratix10-soc-fpga-mgr
+      - intel,agilex-soc-fpga-mgr
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    fpga-mgr {
+      compatible = "intel,stratix10-soc-fpga-mgr";
+    };
diff --git a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
deleted file mode 100644
index 0f874137ca46..000000000000
--- a/Documentation/devicetree/bindings/fpga/intel-stratix10-soc-fpga-mgr.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Intel Stratix10 SoC FPGA Manager
-
-Required properties:
-The fpga_mgr node has the following mandatory property, must be located under
-firmware/svc node.
-
-- compatible : should contain "intel,stratix10-soc-fpga-mgr" or
-	       "intel,agilex-soc-fpga-mgr"
-
-Example:
-
-	firmware {
-		svc {
-			fpga_mgr: fpga-mgr {
-				compatible = "intel,stratix10-soc-fpga-mgr";
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/fpga/lattice,ice40-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/lattice,ice40-fpga-mgr.yaml
new file mode 100644
index 000000000000..5121c6120785
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/lattice,ice40-fpga-mgr.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/lattice,ice40-fpga-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lattice iCE40 FPGA Manager
+
+maintainers:
+  - Joel Holdsworth <joel@airwebreathe.org.uk>
+
+properties:
+  compatible:
+    const: lattice,ice40-fpga-mgr
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    minimum: 1000000
+    maximum: 25000000
+
+  cdone-gpios:
+    maxItems: 1
+    description: GPIO input connected to CDONE pin
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Active-low GPIO output connected to CRESET_B pin. Note that unless the
+      GPIO is held low during startup, the FPGA will enter Master SPI mode and
+      drive SCK with a clock signal potentially jamming other devices on the bus
+      until the firmware is loaded.
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - cdone-gpios
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fpga@0 {
+            compatible = "lattice,ice40-fpga-mgr";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
new file mode 100644
index 000000000000..164331eb6275
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/lattice,sysconfig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lattice Slave SPI sysCONFIG FPGA manager
+
+maintainers:
+  - Vladimir Georgiev <v.georgiev@metrotek.ru>
+
+description: |
+  Lattice sysCONFIG port, which is used for FPGA configuration, among others,
+  have Slave Serial Peripheral Interface. Only full reconfiguration is
+  supported.
+
+  Programming of ECP5 is done by writing uncompressed bitstream image in .bit
+  format into FPGA's SRAM configuration memory.
+
+properties:
+  compatible:
+    enum:
+      - lattice,sysconfig-ecp5
+
+  reg:
+    maxItems: 1
+
+  program-gpios:
+    description:
+      A GPIO line connected to PROGRAMN (active low) pin of the device.
+      Initiates configuration sequence.
+    maxItems: 1
+
+  init-gpios:
+    description:
+      A GPIO line connected to INITN (active low) pin of the device.
+      Indicates that the FPGA is ready to be configured.
+    maxItems: 1
+
+  done-gpios:
+    description:
+      A GPIO line connected to DONE (active high) pin of the device.
+      Indicates that the configuration sequence is complete.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: lattice,sysconfig-ecp5
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 60000000
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fpga-mgr@0 {
+            compatible = "lattice,sysconfig-ecp5";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            program-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+            init-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+            done-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
deleted file mode 100644
index 4dc412437b08..000000000000
--- a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Lattice iCE40 FPGA Manager
-
-Required properties:
-- compatible:		Should contain "lattice,ice40-fpga-mgr"
-- reg:			SPI chip select
-- spi-max-frequency:	Maximum SPI frequency (>=1000000, <=25000000)
-- cdone-gpios:		GPIO input connected to CDONE pin
-- reset-gpios:		Active-low GPIO output connected to CRESET_B pin. Note
-			that unless the GPIO is held low during startup, the
-			FPGA will enter Master SPI mode and drive SCK with a
-			clock signal potentially jamming other devices on the
-			bus until the firmware is loaded.
-
-Example:
-	fpga: fpga@0 {
-		compatible = "lattice,ice40-fpga-mgr";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
new file mode 100644
index 000000000000..a157eecfb5fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/microchip,mpf-spi-fpga-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Polarfire FPGA manager.
+
+maintainers:
+  - Vladimir Georgiev <v.georgiev@metrotek.ru>
+
+description:
+  Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to
+  load the bitstream in .dat format.
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpf-spi-fpga-mgr
+
+  reg:
+    description: SPI chip select
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fpga_mgr@0 {
+                    compatible = "microchip,mpf-spi-fpga-mgr";
+                    spi-max-frequency = <20000000>;
+                    reg = <0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
deleted file mode 100644
index 0acdfa6d62a4..000000000000
--- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Xilinx LogiCORE Partial Reconfig Decoupler Softcore
-
-The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
-decouplers / fpga bridges.
-The controller can decouple/disable the bridges which prevents signal
-changes from passing through the bridge.  The controller can also
-couple / enable the bridges which allows traffic to pass through the
-bridge normally.
-
-Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager
-Softcore is compatible with the Xilinx LogiCORE pr-decoupler.
-
-The Dynamic Function eXchange AXI shutdown manager prevents AXI traffic
-from passing through the bridge. The controller safely handles AXI4MM
-and AXI4-Lite interfaces on a Reconfigurable Partition when it is
-undergoing dynamic reconfiguration, preventing the system deadlock
-that can occur if AXI transactions are interrupted by DFX
-
-The Driver supports only MMIO handling. A PR region can have multiple
-PR Decouplers which can be handled independently or chained via decouple/
-decouple_status signals.
-
-Required properties:
-- compatible		: Should contain "xlnx,pr-decoupler-1.00" followed by
-                          "xlnx,pr-decoupler" or
-                          "xlnx,dfx-axi-shutdown-manager-1.00" followed by
-                          "xlnx,dfx-axi-shutdown-manager"
-- regs			: base address and size for decoupler module
-- clocks		: input clock to IP
-- clock-names		: should contain "aclk"
-
-See Documentation/devicetree/bindings/fpga/fpga-region.txt and
-Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-Partial Reconfig Decoupler:
-	fpga-bridge@100000450 {
-		compatible = "xlnx,pr-decoupler-1.00",
-			     "xlnx-pr-decoupler";
-		regs = <0x10000045 0x10>;
-		clocks = <&clkc 15>;
-		clock-names = "aclk";
-		bridge-enable = <0>;
-	};
-
-Dynamic Function eXchange AXI shutdown manager:
-	fpga-bridge@100000450 {
-		compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
-			     "xlnx,dfx-axi-shutdown-manager";
-		regs = <0x10000045 0x10>;
-		clocks = <&clkc 15>;
-		clock-names = "aclk";
-		bridge-enable = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
deleted file mode 100644
index 5ef659c1394d..000000000000
--- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Xilinx Slave Serial SPI FPGA Manager
-
-Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the
-bitstream over what is referred to as "slave serial" interface.
-The slave serial link is not technically SPI, and might require extra
-circuits in order to play nicely with other SPI slaves on the same bus.
-
-See:
-- https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
-- https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
-- https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
-
-Required properties:
-- compatible: should contain "xlnx,fpga-slave-serial"
-- reg: spi chip select of the FPGA
-- prog_b-gpios: config pin (referred to as PROGRAM_B in the manual)
-- done-gpios: config status pin (referred to as DONE in the manual)
-
-Optional properties:
-- init-b-gpios: initialization status and configuration error pin
-                (referred to as INIT_B in the manual)
-
-Example for full FPGA configuration:
-
-	fpga-region0 {
-		compatible = "fpga-region";
-		fpga-mgr = <&fpga_mgr_spi>;
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-	};
-
-	spi1: spi@10680 {
-		compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
-		pinctrl-0 = <&spi0_pins>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cell-index = <1>;
-		interrupts = <92>;
-		clocks = <&coreclk 0>;
-
-		fpga_mgr_spi: fpga-mgr@0 {
-			compatible = "xlnx,fpga-slave-serial";
-			spi-max-frequency = <60000000>;
-			spi-cpha;
-			reg = <0>;
-			prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-			init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-			done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
index 29daca4be47f..04dcadc2c20e 100644
--- a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
+++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/fpga/xilinx-zynq-fpga-mgr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq FPGA Manager Device Tree Bindings
+title: Xilinx Zynq FPGA Manager
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml b/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml
new file mode 100644
index 000000000000..05775746fd70
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,fpga-selectmap.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,fpga-selectmap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx SelectMAP FPGA interface
+
+maintainers:
+  - Charles Perry <charles.perry@savoirfairelinux.com>
+
+description: |
+  Xilinx 7 Series FPGAs support a method of loading the bitstream over a
+  parallel port named the SelectMAP interface in the documentation. Only
+  the x8 mode is supported where data is loaded at one byte per rising edge of
+  the clock, with the MSB of each byte presented to the D0 pin.
+
+  Datasheets:
+    https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+
+allOf:
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,fpga-xc7s-selectmap
+      - xlnx,fpga-xc7a-selectmap
+      - xlnx,fpga-xc7k-selectmap
+      - xlnx,fpga-xc7v-selectmap
+
+  reg:
+    description:
+      At least 1 byte of memory mapped IO
+    maxItems: 1
+
+  prog-gpios:
+    description:
+      config pin (referred to as PROGRAM_B in the manual)
+    maxItems: 1
+
+  done-gpios:
+    description:
+      config status pin (referred to as DONE in the manual)
+    maxItems: 1
+
+  init-gpios:
+    description:
+      initialization status and configuration error pin
+      (referred to as INIT_B in the manual)
+    maxItems: 1
+
+  csi-gpios:
+    description:
+      chip select pin (referred to as CSI_B in the manual)
+      Optional gpio for if the bus controller does not provide a chip select.
+    maxItems: 1
+
+  rdwr-gpios:
+    description:
+      read/write select pin (referred to as RDWR_B in the manual)
+      Optional gpio for if the bus controller does not provide this pin.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - prog-gpios
+  - done-gpios
+  - init-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    fpga-mgr@8000000 {
+      compatible = "xlnx,fpga-xc7s-selectmap";
+      reg = <0x8000000 0x4>;
+      prog-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+      init-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+      done-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+      csi-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+      rdwr-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml b/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml
new file mode 100644
index 000000000000..614d86ad825f
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,fpga-slave-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Slave Serial SPI FPGA
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+description: |
+  Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the bitstream
+  over what is referred to as slave serial interface.The slave serial link is
+  not technically SPI, and might require extra circuits in order to play nicely
+  with other SPI slaves on the same bus.
+
+  Datasheets:
+    https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
+    https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+    https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,fpga-slave-serial
+
+  spi-cpha: true
+
+  spi-max-frequency:
+    maximum: 60000000
+
+  reg:
+    maxItems: 1
+
+  prog_b-gpios:
+    description:
+      config pin (referred to as PROGRAM_B in the manual)
+    maxItems: 1
+
+  done-gpios:
+    description:
+      config status pin (referred to as DONE in the manual)
+    maxItems: 1
+
+  init-b-gpios:
+    description:
+      initialization status and configuration error pin
+      (referred to as INIT_B in the manual)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - prog_b-gpios
+  - done-gpios
+  - init-b-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      fpga_mgr_spi: fpga-mgr@0 {
+        compatible = "xlnx,fpga-slave-serial";
+        spi-max-frequency = <60000000>;
+        spi-cpha;
+        reg = <0>;
+        prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+        init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+        done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
new file mode 100644
index 000000000000..5bf731f9d99a
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,pr-decoupler.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx LogiCORE Partial Reconfig Decoupler/AXI shutdown manager Softcore
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+allOf:
+  - $ref: fpga-bridge.yaml#
+
+description: |
+  The Xilinx LogiCORE Partial Reconfig(PR) Decoupler manages one or more
+  decouplers/fpga bridges. The controller can decouple/disable the bridges
+  which prevents signal changes from passing through the bridge. The controller
+  can also couple / enable the bridges which allows traffic to pass through the
+  bridge normally.
+  Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager Softcore
+  is compatible with the Xilinx LogiCORE pr-decoupler. The Dynamic Function
+  eXchange AXI shutdown manager prevents AXI traffic from passing through the
+  bridge. The controller safely handles AXI4MM and AXI4-Lite interfaces on a
+  Reconfigurable Partition when it is undergoing dynamic reconfiguration,
+  preventing the system deadlock that can occur if AXI transactions are
+  interrupted by DFX.
+  Please refer to fpga-region.txt and fpga-bridge.txt in this directory for
+  common binding part and usage.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: xlnx,pr-decoupler-1.00
+          - const: xlnx,pr-decoupler
+      - items:
+          - const: xlnx,dfx-axi-shutdown-manager-1.00
+          - const: xlnx,dfx-axi-shutdown-manager
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: aclk
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fpga-bridge@100000450 {
+      compatible = "xlnx,pr-decoupler-1.00", "xlnx,pr-decoupler";
+      reg = <0x10000045 0x10>;
+      clocks = <&clkc 15>;
+      clock-names = "aclk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
index ac6a207278d5..41b368d54557 100644
--- a/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
+++ b/Documentation/devicetree/bindings/fpga/xlnx,versal-fpga.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx Versal FPGA driver.
 
 maintainers:
-  - Nava kishore Manne <nava.manne@xilinx.com>
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
 
 description: |
   Device Tree Versal FPGA bindings for the Versal SoC, controlled
@@ -26,8 +26,8 @@ additionalProperties: false
 
 examples:
   - |
-    versal_fpga: versal_fpga {
-         compatible = "xlnx,versal-fpga";
+    versal_fpga: versal-fpga {
+        compatible = "xlnx,versal-fpga";
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
index 6cd2bdc06b5f..1390ae103b0b 100644
--- a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq Ultrascale MPSoC FPGA Manager Device Tree Bindings
+title: Xilinx Zynq Ultrascale MPSoC FPGA Manager
 
 maintainers:
-  - Nava kishore Manne <navam@xilinx.com>
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
 
 description: |
   Device Tree Bindings for Zynq Ultrascale MPSoC FPGA Manager.
diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2400-cf-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2400-cf-fsi-master.yaml
new file mode 100644
index 000000000000..690b6c936f18
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2400-cf-fsi-master.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/aspeed,ast2400-cf-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASpeed ColdFire offloaded GPIO-based FSI master
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+  - $ref: /schemas/fsi/fsi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-cf-fsi-master
+      - aspeed,ast2500-cf-fsi-master
+
+  clock-gpios:
+    maxItems: 1
+    description: GPIO for FSI clock
+
+  data-gpios:
+    maxItems: 1
+    description: GPIO for FSI data signal
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO for enable signal
+
+  trans-gpios:
+    maxItems: 1
+    description: GPIO for voltage translator enable
+
+  mux-gpios:
+    maxItems: 1
+    description:
+      GPIO for pin multiplexing with other functions (eg, external FSI masters)
+
+  memory-region:
+    maxItems: 1
+    description:
+      Reference to the reserved memory for the ColdFire. Must be 2M aligned on
+      AST2400 and 1M aligned on AST2500.
+
+  aspeed,cvic:
+    description: Reference to the CVIC node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  aspeed,sram:
+    description: Reference to the SRAM node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - clock-gpios
+  - data-gpios
+  - enable-gpios
+  - trans-gpios
+  - mux-gpios
+  - memory-region
+  - aspeed,cvic
+  - aspeed,sram
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fsi-master {
+      compatible = "aspeed,ast2500-cf-fsi-master";
+      clock-gpios = <&gpio 0>;
+      data-gpios = <&gpio 1>;
+      enable-gpios = <&gpio 2>;
+      trans-gpios = <&gpio 3>;
+      mux-gpios = <&gpio 4>;
+      memory-region = <&coldfire_memory>;
+      aspeed,cvic = <&cvic>;
+      aspeed,sram = <&sram>;
+    };
diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
new file mode 100644
index 000000000000..dfcc2fafa68d
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed FSI master
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The AST2600 and later contain two identical FSI masters. They share a
+  clock and have a separate interrupt line and output pins.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-fsi-master
+      - aspeed,ast2700-fsi-master
+
+  clocks:
+    maxItems: 1
+
+  cfam-reset-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin for CFAM reset
+
+  fsi-routing-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin for setting the FSI mux (internal or cabled)
+
+  fsi-mux-gpios:
+    maxItems: 1
+    description:
+      Input GPIO pin for detecting the desired FSI mux state
+
+  interrupts:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - aspeed,ast2600-fsi-master
+then:
+  properties:
+    reg:
+      maxItems: 1
+else:
+  properties:
+    reg:
+      minItems: 1
+      items:
+        - description: OPB control registers
+        - description: FSI controller registers
+        - description: FSI link address space
+    reg-names:
+      items:
+        - const: opb
+        - const: ctrl
+        - const: fsi
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+allOf:
+  - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    #include <dt-bindings/gpio/aspeed-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    fsi-master@1e79b000 {
+        compatible = "aspeed,ast2600-fsi-master";
+        reg = <0x1e79b000 0x94>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_fsi1_default>;
+        clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+        fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+        fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+        cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+
+        cfam@0,0 {
+            reg = <0 0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            chip-id = <0>;
+        };
+    };
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        fsi-master@21800000 {
+            compatible = "aspeed,ast2700-fsi-master";
+            reg = <0x0 0x21800000 0x0 0x100>,
+                  <0x0 0x21000000 0x0 0x1000>,
+                  <0x0 0x20000000 0x0 0x1000000>;
+            reg-names = "opb", "ctrl", "fsi";
+            #interrupt-cells = <1>;
+            interrupt-controller;
+            interrupts-extended = <&intc 6>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_fsi0_default>;
+            clocks = <&syscon 40>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/fsi/fsi-controller.yaml b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
new file mode 100644
index 000000000000..ffe191921b26
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-controller.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSI Controller Common Properties
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  FSI (FRU (Field Replaceable Unit) Service Interface) is a two wire bus. The
+  FSI bus is connected to a CFAM (Common FRU Access Macro) which contains
+  various engines such as I2C controllers, SPI controllers, etc.
+
+properties:
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+  '#interrupt-cells':
+    const: 1
+
+  bus-frequency:
+    minimum: 1
+    maximum: 200000000
+
+  interrupt-controller: true
+
+  no-scan-on-init:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The FSI controller cannot scan the bus during initialization.
+
+patternProperties:
+  "cfam@[0-9a-f],[0-9a-f]":
+    type: object
+    properties:
+      chip-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Processor index, a global unique chip ID which is used to identify
+          the physical location of the chip in a system specific way.
+
+      bus-frequency:
+        minimum: 1
+        maximum: 100000000
+
+      reg:
+        maxItems: 1
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+    required:
+      - reg
+
+    additionalProperties: true
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
deleted file mode 100644
index 9853fefff5d8..000000000000
--- a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device-tree bindings for AST2600 FSI master
--------------------------------------------
-
-The AST2600 contains two identical FSI masters. They share a clock and have a
-separate interrupt line and output pins.
-
-Required properties:
- - compatible: "aspeed,ast2600-fsi-master"
- - reg: base address and length
- - clocks: phandle and clock number
- - interrupts: platform dependent interrupt description
- - pinctrl-0: phandle to pinctrl node
- - pinctrl-names: pinctrl state
-
-Optional properties:
- - cfam-reset-gpios: GPIO for CFAM reset
-
- - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
- - fsi-mux-gpios: GPIO for detecting the desired FSI mux state
-
-
-Examples:
-
-    fsi-master {
-        compatible = "aspeed,ast2600-fsi-master", "fsi-master";
-        reg = <0x1e79b000 0x94>;
-	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fsi1_default>;
-	clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-
-	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
-	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-    };
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt b/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt
deleted file mode 100644
index 3dc752db748b..000000000000
--- a/Documentation/devicetree/bindings/fsi/fsi-master-ast-cf.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device-tree bindings for ColdFire offloaded gpio-based FSI master driver
-------------------------------------------------------------------------
-
-Required properties:
- - compatible =
-	"aspeed,ast2400-cf-fsi-master" for an AST2400 based system
-   or
-	"aspeed,ast2500-cf-fsi-master" for an AST2500 based system
-
- - clock-gpios = <gpio-descriptor>;	: GPIO for FSI clock
- - data-gpios = <gpio-descriptor>;	: GPIO for FSI data signal
- - enable-gpios = <gpio-descriptor>;	: GPIO for enable signal
- - trans-gpios = <gpio-descriptor>;	: GPIO for voltage translator enable
- - mux-gpios = <gpio-descriptor>;	: GPIO for pin multiplexing with other
-                                          functions (eg, external FSI masters)
- - memory-region = <phandle>;		: Reference to the reserved memory for
-                                          the ColdFire. Must be 2M aligned on
-					  AST2400 and 1M aligned on AST2500
- - aspeed,sram = <phandle>;		: Reference to the SRAM node.
- - aspeed,cvic = <phandle>;		: Reference to the CVIC node.
-
-Examples:
-
-    fsi-master {
-        compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
-
-	clock-gpios = <&gpio 0>;
-        data-gpios = <&gpio 1>;
-        enable-gpios = <&gpio 2>;
-        trans-gpios = <&gpio 3>;
-        mux-gpios = <&gpio 4>;
-
-	memory-region = <&coldfire_memory>;
-	aspeed,sram = <&sram>;
-	aspeed,cvic = <&cvic>;
-    }
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
deleted file mode 100644
index 1e442450747f..000000000000
--- a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Device-tree bindings for gpio-based FSI master driver
------------------------------------------------------
-
-Required properties:
- - compatible = "fsi-master-gpio";
- - clock-gpios = <gpio-descriptor>;	: GPIO for FSI clock
- - data-gpios = <gpio-descriptor>;	: GPIO for FSI data signal
-
-Optional properties:
- - enable-gpios = <gpio-descriptor>;	: GPIO for enable signal
- - trans-gpios = <gpio-descriptor>;	: GPIO for voltage translator enable
- - mux-gpios = <gpio-descriptor>;	: GPIO for pin multiplexing with other
-                                          functions (eg, external FSI masters)
- - no-gpio-delays;			: Don't add extra delays between GPIO
-                                          accesses. This is useful when the HW
-					  GPIO block is running at a low enough
-					  frequency.
-
-Examples:
-
-    fsi-master {
-        compatible = "fsi-master-gpio", "fsi-master";
-        clock-gpios = <&gpio 0>;
-        data-gpios = <&gpio 1>;
-        enable-gpios = <&gpio 2>;
-        trans-gpios = <&gpio 3>;
-        mux-gpios = <&gpio 4>;
-    }
diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml
new file mode 100644
index 000000000000..21bfbad595b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/fsi-master-gpio.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/fsi-master-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: fsi-master-gpio
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+  - $ref: /schemas/fsi/fsi-controller.yaml
+
+properties:
+  compatible:
+    items:
+      - const: fsi-master-gpio
+
+  clock-gpios:
+    description: GPIO for FSI clock
+    maxItems: 1
+
+  data-gpios:
+    description: GPIO for FSI data signal
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO for enable signal
+    maxItems: 1
+
+  trans-gpios:
+    description: GPIO for voltage translator enable
+    maxItems: 1
+
+  mux-gpios:
+    description: GPIO for pin multiplexing with other functions (eg, external
+      FSI masters)
+    maxItems: 1
+
+  no-gpio-delays:
+    description:
+      Don't add extra delays between GPIO accesses. This is useful when the HW
+      GPIO block is running at a low enough frequency.
+    type: boolean
+
+required:
+  - compatible
+  - clock-gpios
+  - data-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fsi-master {
+        compatible = "fsi-master-gpio";
+        clock-gpios = <&gpio 0>;
+        data-gpios = <&gpio 1>;
+        enable-gpios = <&gpio 2>;
+        trans-gpios = <&gpio 3>;
+        mux-gpios = <&gpio 4>;
+    };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
index e2ca0b000471..ad5c83f48425 100644
--- a/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
+++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2spi.yaml
@@ -9,11 +9,10 @@ title: IBM FSI-attached SPI controllers
 maintainers:
   - Eddie James <eajames@linux.ibm.com>
 
-description: |
+description:
   This binding describes an FSI CFAM engine called the FSI2SPI. Therefore this
-  node will always be a child of an FSI CFAM node; see fsi.txt for details on
-  FSI slave and CFAM nodes. This FSI2SPI engine provides access to a number of
-  SPI controllers.
+  node will always be a child of an FSI CFAM node. This FSI2SPI engine provides
+  access to a number of SPI controllers.
 
 properties:
   compatible:
@@ -24,6 +23,17 @@ properties:
     items:
       - description: FSI slave address
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^spi@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/spi/ibm,spi-fsi.yaml
+
 required:
   - compatible
   - reg
@@ -35,4 +45,22 @@ examples:
     fsi2spi@1c00 {
         compatible = "ibm,fsi2spi";
         reg = <0x1c00 0x400>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi@0 {
+            compatible = "ibm,spi-fsi";
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eeprom@0 {
+                compatible = "atmel,at25";
+                reg = <0>;
+                address-width = <24>;
+                pagesize = <256>;
+                size = <0x80000>;
+                spi-max-frequency = <1000000>;
+            };
+        };
     };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
new file mode 100644
index 000000000000..e49ace3ca339
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,i2cr-fsi-master.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,i2cr-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM I2C Responder virtual FSI master
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  The I2C Responder (I2CR) is a an I2C device that's connected to an FSI CFAM
+  (see fsi.txt). The I2CR translates I2C bus operations to FSI CFAM reads and
+  writes or SCOM operations, thereby acting as an FSI master.
+
+properties:
+  compatible:
+    enum:
+      - ibm,i2cr-fsi-master
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2cr@20 {
+        compatible = "ibm,i2cr-fsi-master";
+        reg = <0x20>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
new file mode 100644
index 000000000000..29ea80ff915e
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-fsi-controller.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-fsi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached FSI Hub Controller
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The FSI Hub Controller is an FSI controller, providing a number of FSI links,
+  located on a CFAM. Therefore this node will always be a child of an FSI CFAM
+  node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-fsi-controller
+
+  reg:
+    items:
+      - description: FSI slave address
+
+allOf:
+  - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    fsi@3400 {
+        compatible = "ibm,p9-fsi-controller";
+        reg = <0x3400 0x400>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cfam@0,0 {
+            reg = <0 0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            chip-id = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
deleted file mode 100644
index e73358075a90..000000000000
--- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
------------------------------------------------------------------------------
-
-This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
-a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
-nodes. The OCC is not an FSI slave device itself, rather it is accessed
-through the SBE FIFO.
-
-Required properties:
- - compatible = "ibm,p9-occ" or "ibm,p10-occ"
-
-Examples:
-
-    occ {
-        compatible = "ibm,p9-occ";
-    };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
new file mode 100644
index 000000000000..537eac70447c
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached On-Chip Controller (OCC)
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The POWER processor On-Chip Controller (OCC) helps manage power and
+  thermals for the system, accessed through the FSI-attached SBEFIFO
+  from a service processor.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-occ
+      - ibm,p10-occ
+
+  hwmon:
+    type: object
+    $ref: /schemas/hwmon/ibm,occ-hwmon.yaml
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    occ {
+        compatible = "ibm,p9-occ";
+
+        hwmon {
+            compatible = "ibm,p9-occ-hwmon";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
new file mode 100644
index 000000000000..3cd966fb3c0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-sbefifo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SBEFIFO engine
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The SBEFIFO is an FSI CFAM engine that provides an interface to the
+  POWER processor Self Boot Engine (SBE). This node will always be a child
+  of an FSI CFAM node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-sbefifo
+      - ibm,odyssey-sbefifo
+
+  reg:
+    items:
+      - description: FSI slave address
+
+  occ:
+    type: object
+    $ref: ibm,p9-occ.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    fsi-slave-engine@2400 {
+        compatible = "ibm,p9-sbefifo";
+        reg = <0x2400 0x400>;
+
+        occ {
+            compatible = "ibm,p9-occ";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
new file mode 100644
index 000000000000..b106f5212ea9
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/ibm,p9-scom.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/ibm,p9-scom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached SCOM engine
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The SCOM engine is an interface to the POWER processor PIB (Pervasive
+  Interconnect Bus). This node will always be a child of an FSI CFAM node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,fsi2pib
+      - ibm,p9-scom
+      - ibm,i2cr-scom
+
+  reg:
+    items:
+      - description: FSI slave address
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    scom@1000 {
+        compatible = "ibm,p9-scom";
+        reg = <0x1000 0x400>;
+    };
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
deleted file mode 100644
index b109911669e4..000000000000
--- a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
-
-Required properties:
-- compatible : For Tegra20, must contain "nvidia,tegra20-efuse".  For Tegra30,
-  must contain "nvidia,tegra30-efuse".  For Tegra114, must contain
-  "nvidia,tegra114-efuse".  For Tegra124, must contain "nvidia,tegra124-efuse".
-  For Tegra132 must contain "nvidia,tegra132-efuse", "nvidia,tegra124-efuse".
-  For Tegra210 must contain "nvidia,tegra210-efuse". For Tegra186 must contain
-  "nvidia,tegra186-efuse". For Tegra194 must contain "nvidia,tegra194-efuse".
-  For Tegra234 must contain "nvidia,tegra234-efuse".
-  Details:
-  nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
-	due to a hardware bug. Tegra20 also lacks certain information which is
-	available in later generations such as fab code, lot code, wafer id,..
-  nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
-	The differences between these SoCs are the size of the efuse array,
-	the location of the spare (OEM programmable) bits and the location of
-	the speedo data.
-- reg: Should contain 1 entry: the entry gives the physical address and length
-       of the fuse registers.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - fuse
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
- - fuse
-
-Example:
-
-	fuse@7000f800 {
-		compatible = "nvidia,tegra20-efuse";
-		reg = <0x7000f800 0x400>,
-		      <0x70000000 0x400>;
-		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml
new file mode 100644
index 000000000000..02f0b0462377
--- /dev/null
+++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fuse/nvidia,tegra20-fuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra FUSE block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-efuse
+          - nvidia,tegra30-efuse
+          - nvidia,tegra114-efuse
+          - nvidia,tegra124-efuse
+          - nvidia,tegra210-efuse
+          - nvidia,tegra186-efuse
+          - nvidia,tegra194-efuse
+          - nvidia,tegra234-efuse
+
+      - items:
+          - const: nvidia,tegra132-efuse
+          - const: nvidia,tegra124-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fuse
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: fuse
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nvidia,tegra20-efuse
+          - nvidia,tegra30-efuse
+          - nvidia,tegra114-efuse
+          - nvidia,tegra124-efuse
+          - nvidia,tegra132-efuse
+          - nvidia,tegra210-efuse
+then:
+  required:
+    - resets
+    - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    fuse@7000f800 {
+        compatible = "nvidia,tegra20-efuse";
+        reg = <0x7000f800 0x400>;
+        clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+        clock-names = "fuse";
+        resets = <&tegra_car 39>;
+        reset-names = "fuse";
+    };
diff --git a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
new file mode 100644
index 000000000000..089166089498
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/brcm,bcm4751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4751 family GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Broadcom GPS chips can be used over the UART or I2C bus. The UART
+  bus requires CTS/RTS support. The number of the capsule is more
+  elaborate than the compatibles BCM4751 may be printed
+  BCM4751IFBG for example.
+
+allOf:
+  - $ref: gnss-common.yaml#
+  - $ref: /schemas/serial/serial-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4751
+      - brcm,bcm4752
+      - brcm,bcm4753
+
+  reg:
+    description:
+      The I2C Address, not required on UART buses.
+
+  vdd-auxin-supply:
+    description:
+      Main voltage supply, pin name VDD_AUXIN, typically connected
+      directly to a battery such as LiIon 3.8V battery or a 2.6V supply.
+
+  vddio-supply:
+    description:
+      IO voltage supply, pin name VDDIO, typically 1.8V
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional active low reset line, should be flagged with
+      GPIO_ACTIVE_LOW.
+
+  enable-gpios:
+    description: Enable GPIO line, connected to pins named REGPU or NSTANDBY.
+      If the line is active low such as NSTANDBY, it should be tagged
+      GPIO_ACTIVE_LOW.
+
+required:
+  - compatible
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "brcm,bcm4751";
+            vdd-auxin-supply = <&vbat>;
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+            current-speed = <38400>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/gnss-common.yaml b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
new file mode 100644
index 000000000000..354c0524089c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/gnss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Global Navigation Satellite Systems (GNSS)
+  receiver devices
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description: |
+  This document defines device tree properties common to Global Navigation
+  Satellite System receivers.
+
+properties:
+  $nodename:
+    pattern: "^gnss(@.*)?$"
+
+  lna-supply:
+    description: A separate regulator supplying power for the Low Noise
+      Amplifier (LNA). This is an amplifier connected between the GNSS
+      device and the receiver antenna.
+
+  enable-gpios:
+    description: A GPIO line that will enable the GNSS receiver when
+      asserted. If this line is active low, the GPIO phandle should
+      consequently be tagged with the GPIO_ACTIVE_LOW flag so the operating
+      system can rely on asserting the line to enable the GNSS device.
+    maxItems: 1
+
+  timepulse-gpios:
+    description: Timepulse signal
+    maxItems: 1
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+      gnss {
+        compatible = "u-blox,neo-8";
+        vcc-supply = <&gnss_reg>;
+        timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+        current-speed = <4800>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt
deleted file mode 100644
index d6dc9c0d8249..000000000000
--- a/Documentation/devicetree/bindings/gnss/gnss.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-GNSS Receiver DT binding
-
-This documents the binding structure and common properties for GNSS receiver
-devices.
-
-A GNSS receiver node is a node named "gnss" and typically resides on a serial
-bus (e.g. UART, I2C or SPI).
-
-Please refer to the following documents for generic properties:
-
-	Documentation/devicetree/bindings/serial/serial.yaml
-	Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Required properties:
-
-- compatible	: A string reflecting the vendor and specific device the node
-		  represents
-
-Optional properties:
-- lna-supply	: Separate supply for an LNA
-- enable-gpios	: GPIO used to enable the device
-- timepulse-gpios	: Time pulse GPIO
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "u-blox,neo-8";
-
-		vcc-supply = <&gnss_reg>;
-		timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-
-		current-speed = <4800>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.txt b/Documentation/devicetree/bindings/gnss/mediatek.txt
deleted file mode 100644
index 80cb802813c5..000000000000
--- a/Documentation/devicetree/bindings/gnss/mediatek.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Mediatek-based GNSS Receiver DT binding
-
-Mediatek chipsets are used in GNSS-receiver modules produced by several
-vendors and can use a UART interface.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be
-
-			"globaltop,pa6h"
-
-- vcc-supply	: Main voltage regulator (pin name: VCC)
-
-Optional properties:
-
-- current-speed		: Default UART baud rate
-- gnss-fix-gpios	: GPIO used to determine device position fix state
-			  (pin name: FIX, 3D_FIX)
-- reset-gpios		: GPIO used to reset the device (pin name: RESET, NRESET)
-- timepulse-gpios	: Time pulse GPIO (pin name: PPS1, 1PPS)
-- vbackup-supply	: Backup voltage regulator (pin name: VBAT, VBACKUP)
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "globaltop,pa6h";
-		vcc-supply = <&vcc_3v3>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.yaml b/Documentation/devicetree/bindings/gnss/mediatek.yaml
new file mode 100644
index 000000000000..2b9e5be4ebf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/mediatek.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/mediatek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description:
+  Mediatek chipsets are used in GNSS-receiver modules produced by several
+  vendors and can use a UART interface.
+
+allOf:
+  - $ref: gnss-common.yaml#
+  - $ref: /schemas/serial/serial-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: globaltop,pa6h
+
+  vcc-supply:
+    description:
+      Main voltage regulator, pin name VCC.
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional reset line, with names such as RESET or NRESET.
+      If the line is active low it should be flagged with GPIO_ACTIVE_LOW.
+
+  timepulse-gpios:
+    description: Comes with pin names such as PPS1 or 1PPS.
+
+  gnss-fix-gpios:
+    maxItems: 1
+    description: GPIO used to determine device position fix state, pin names
+      FIX or 3D_FIX.
+
+  vbackup-supply:
+    description:
+      Regulator providing backup voltage, pin names such as VBAT or VBACKUP.
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "globaltop,pa6h";
+            vcc-supply = <&vcc_3v3>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt
deleted file mode 100644
index f4252b6b660b..000000000000
--- a/Documentation/devicetree/bindings/gnss/sirfstar.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SiRFstar-based GNSS Receiver DT binding
-
-SiRFstar chipsets are used in GNSS-receiver modules produced by several
-vendors and can use UART, SPI or I2C interfaces.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be one of
-
-			"fastrax,uc430"
-			"linx,r4"
-			"wi2wi,w2sg0004"
-			"wi2wi,w2sg0008i"
-			"wi2wi,w2sg0084i"
-
-- vcc-supply	: Main voltage regulator (pin name: 3V3_IN, VCC, VDD)
-
-Required properties (I2C):
-- reg		: I2C slave address
-
-Required properties (SPI):
-- reg		: SPI chip select address
-
-Optional properties:
-
-- sirf,onoff-gpios	: GPIO used to power on and off device (pin name: ON_OFF)
-- sirf,wakeup-gpios	: GPIO used to determine device power state
-			  (pin name: RFPWRUP, WAKEUP)
-- timepulse-gpios	: Time pulse GPIO (pin name: 1PPS, TM)
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "wi2wi,w2sg0084i";
-
-		vcc-supply = <&gnss_reg>;
-		sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.yaml b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
new file mode 100644
index 000000000000..7e5da89a5ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/sirfstar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiRFstar GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description:
+  The SiRFstar GNSS receivers have incarnated over the years in different
+  chips, starting from the SiRFstarIII which was a chip that was introduced in
+  2004 and used in a lot of dedicated GPS devices. In 2009 SiRF was acquired
+  by CSR (Cambridge Silicon Radio) and in 2012 the CSR GPS business was
+  acquired by Samsung, while some products remained with CSR. In 2014 CSR
+  was acquired by Qualcomm who still sell some of the SiRF products.
+
+  SiRF chips can be used over UART, I2C or SPI buses.
+
+allOf:
+  - $ref: gnss-common.yaml#
+  - $ref: /schemas/serial/serial-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - csr,gsd4t
+      - csr,csrg05ta03-icje-r
+      - fastrax,uc430
+      - linx,r4
+      - wi2wi,w2sg0004
+      - wi2wi,w2sg0008i
+      - wi2wi,w2sg0084i
+
+  reg:
+    description:
+      The I2C Address, SPI chip select address. Not required on UART buses.
+
+  vcc-supply:
+    description:
+      Main voltage regulator, pin names such as 3V3_IN, VCC, VDD.
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional active low reset line, should be flagged with
+      GPIO_ACTIVE_LOW.
+
+  sirf,onoff-gpios:
+    maxItems: 1
+    description: GPIO used to power on and off device, pin name ON_OFF.
+
+  sirf,wakeup-gpios:
+    maxItems: 1
+    description: GPIO used to determine device power state, pin names such
+      as RFPWRUP, WAKEUP.
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "wi2wi,w2sg0084i";
+            vcc-supply = <&gnss_vcc_reg>;
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+            sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+            sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+            current-speed = <38400>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
index 396101a223e7..b349b7bc0412 100644
--- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
+++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -4,20 +4,28 @@
 $id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: U-blox GNSS Receiver Device Tree Bindings
+title: u-blox GNSS receiver
+
+allOf:
+  - $ref: gnss-common.yaml#
+  - $ref: /schemas/serial/serial-peripheral-props.yaml#
 
 maintainers:
   - Johan Hovold <johan@kernel.org>
 
 description: >
-  The U-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces.
+  The u-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces.
 
 properties:
   compatible:
-    enum:
-      - u-blox,neo-6m
-      - u-blox,neo-8
-      - u-blox,neo-m8
+    oneOf:
+      - enum:
+          - u-blox,neo-6m
+          - u-blox,neo-8
+          - u-blox,neo-m8
+      - items:
+          - const: u-blox,neo-m9
+          - const: u-blox,neo-m8
 
   reg:
     description: >
@@ -25,38 +33,41 @@ properties:
       port or the USB host-controller port to which this device is attached,
       depending on the bus used. Required for the DDC, SPI or USB busses.
 
-  vcc-supply:
-    description: >
-      Main voltage regulator
+  reset-gpios:
+    maxItems: 1
 
-  timepulse-gpios:
+  safeboot-gpios:
     maxItems: 1
+
+  vcc-supply:
     description: >
-      Time pulse GPIO
+      Main voltage regulator
 
   u-blox,extint-gpios:
     maxItems: 1
     description: >
       GPIO connected to the "external interrupt" input pin
-  
+
   v-bckp-supply:
     description: >
       Backup voltage regulator
 
-  current-speed: true
-
 required:
   - compatible
   - vcc-supply
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     serial {
         gnss {
             compatible = "u-blox,neo-8";
             v-bckp-supply = <&gnss_v_bckp_reg>;
             vcc-supply = <&gnss_vcc_reg>;
+            reset-gpios = <&gpio 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+            safeboot-gpios = <&gpio 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
         };
     };
diff --git a/Documentation/devicetree/bindings/goldfish/pipe.txt b/Documentation/devicetree/bindings/goldfish/pipe.txt
index e417a31a1ee3..5637ce701788 100644
--- a/Documentation/devicetree/bindings/goldfish/pipe.txt
+++ b/Documentation/devicetree/bindings/goldfish/pipe.txt
@@ -1,6 +1,6 @@
 Android Goldfish QEMU Pipe
 
-Andorid pipe virtual device generated by android emulator.
+Android pipe virtual device generated by android emulator.
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt b/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
deleted file mode 100644
index 973362eb3f1e..000000000000
--- a/Documentation/devicetree/bindings/gpio/8xxx_gpio.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-GPIO controllers on MPC8xxx SoCs
-
-This is for the non-QE/CPM/GUTs GPIO controllers as found on
-8349, 8572, 8610 and compatible.
-
-Every GPIO controller node must have #gpio-cells property defined,
-this information will be used to translate gpio-specifiers.
-See bindings/gpio/gpio.txt for details of how to specify GPIO
-information for devices.
-
-The GPIO module usually is connected to the SoC's internal interrupt
-controller, see bindings/interrupt-controller/interrupts.txt (the
-interrupt client nodes section) for details how to specify this GPIO
-module's interrupt.
-
-The GPIO module may serve as another interrupt controller (cascaded to
-the SoC's internal interrupt controller).  See the interrupt controller
-nodes section in bindings/interrupt-controller/interrupts.txt for
-details.
-
-Required properties:
-- compatible:		"fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
-			for 83xx, "fsl,mpc8572-gpio" for 85xx, or
-			"fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells:		Should be two. The first cell is the pin number
-			and the second cell is used to specify optional
-			parameters (currently unused).
-- interrupts:		Interrupt mapping for GPIO IRQ.
-- gpio-controller:	Marks the port as GPIO controller.
-
-Optional properties:
-- interrupt-controller:	Empty boolean property which marks the GPIO
-			module as an IRQ controller.
-- #interrupt-cells:	Should be two.  Defines the number of integer
-			cells required to specify an interrupt within
-			this interrupt controller.  The first cell
-			defines the pin number, the second cell
-			defines additional flags (trigger type,
-			trigger polarity).  Note that the available
-			set of trigger conditions supported by the
-			GPIO module depends on the actual SoC.
-
-Example of gpio-controller nodes for a MPC8347 SoC:
-
-	gpio1: gpio-controller@c00 {
-		#gpio-cells = <2>;
-		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
-		reg = <0xc00 0x100>;
-		interrupt-parent = <&ipic>;
-		interrupts = <74 0x8>;
-		gpio-controller;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpio2: gpio-controller@d00 {
-		#gpio-cells = <2>;
-		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
-		reg = <0xd00 0x100>;
-		interrupt-parent = <&ipic>;
-		interrupts = <75 0x8>;
-		gpio-controller;
-	};
-
-Example of a peripheral using the GPIO module as an IRQ controller:
-
-	funkyfpga@0 {
-		compatible = "funky-fpga";
-		...
-		interrupt-parent = <&gpio1>;
-		interrupts = <4 3>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
deleted file mode 100644
index ce19c5660aca..000000000000
--- a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* Abilis TB10x GPIO controller
-
-Required Properties:
-- compatible: Should be "abilis,tb10x-gpio"
-- reg: Address and length of the register set for the device
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be <2>. The first cell is the pin number and the
-  second cell is used to specify optional parameters:
-   - bit 0 specifies polarity (0 for normal, 1 for inverted).
-- abilis,ngpio: the number of GPIO pins this driver controls.
-
-Optional Properties:
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be <1>. Interrupts are triggered on both edges.
-- interrupts: Defines the interrupt line connecting this GPIO controller to
-  its parent interrupt controller.
-
-GPIO ranges are specified as described in
-Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
-
-	gpioa: gpio@ff140000 {
-		compatible = "abilis,tb10x-gpio";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&tb10x_ictl>;
-		interrupts = <27 2>;
-		reg = <0xFF140000 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		abilis,ngpio = <3>;
-		gpio-ranges = <&iomux 0 0 0>;
-		gpio-ranges-group-names = "gpioa_pins";
-	};
diff --git a/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.yaml b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.yaml
new file mode 100644
index 000000000000..c93ec0f16bcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/abilis,tb10x-gpio.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/abilis,tb10x-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Abilis TB10x GPIO controller
+
+maintainers:
+  - Christian Ruppert <christian.ruppert@abilis.com>
+
+properties:
+  compatible:
+    const: abilis,tb10x-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges: true
+
+  gpio-ranges-group-names: true
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+    description: Interrupts are triggered on both edges
+
+  interrupts:
+    maxItems: 1
+
+  abilis,ngpio:
+    description: Number of GPIO pins this driver controls
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - abilis,ngpio
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@ff140000 {
+        compatible = "abilis,tb10x-gpio";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <27 2>;
+        reg = <0xff140000 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        abilis,ngpio = <3>;
+        gpio-ranges = <&iomux 0 0 0>;
+        gpio-ranges-group-names = "gpioa_pins";
+    };
diff --git a/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml b/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml
new file mode 100644
index 000000000000..25b3198c4d3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/adi,ds4520-gpio.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/adi,ds4520-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DS4520 I2C GPIO expander
+
+maintainers:
+  - Okan Sahin <okan.sahin@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,ds4520-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 9
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@50 {
+            compatible = "adi,ds4520-gpio";
+            reg = <0x50>;
+            ngpios = <9>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
new file mode 100644
index 000000000000..7c41d8e814cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7523 GPIO controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description: |
+  Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
+  GPIOs.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: airoha,en7523-gpio
+
+  reg:
+    description: |
+      The first tuple points to the input register.
+      The second and third tuple point to the direction registers
+      The fourth tuple points to the output register
+    maxItems: 4
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@1fbf0200 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0204 0x4>,
+              <0x1fbf0200 0x4>,
+              <0x1fbf0220 0x4>,
+              <0x1fbf0214 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+    gpio1: gpio@1fbf0270 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0270 0x4>,
+              <0x1fbf0260 0x4>,
+              <0x1fbf0264 0x4>,
+              <0x1fbf0278 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/altr-pio-1.0.yaml b/Documentation/devicetree/bindings/gpio/altr-pio-1.0.yaml
new file mode 100644
index 000000000000..18afed324198
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/altr-pio-1.0.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/altr-pio-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera GPIO controller
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+  - Marek Vasut <marex@denx.de>
+  - Mathieu Malaterre <malat@debian.org>
+  - Tien Hock Loh <thloh@altera.com>
+
+properties:
+  compatible:
+    const: altr,pio-1.0
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description:
+      First cell is the GPIO offset number. Second cell is reserved and
+      currently unused.
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  altr,ngpio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Width of the GPIO bank.
+    default: 32
+
+  altr,interrupt-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Specifies the interrupt trigger type synthesized by hardware.
+      Values defined in <dt-bindings/interrupt-controller/irq.h>.
+    enum: [1, 2, 3, 4]
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@ff200000 {
+        compatible = "altr,pio-1.0";
+        reg = <0xff200000 0x10>;
+        interrupts = <45 4>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        altr,ngpio = <32>;
+        altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/apm,xgene-gpio-sb.yaml b/Documentation/devicetree/bindings/gpio/apm,xgene-gpio-sb.yaml
new file mode 100644
index 000000000000..d205dd7b492c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/apm,xgene-gpio-sb.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/apm,xgene-gpio-sb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene Standby GPIO controller
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+description: |
+  This is a gpio controller in the standby domain. It also supports interrupt in
+  some particular pins which are sourced to its parent interrupt controller
+  as diagram below:
+                                +-----------------+
+                                | X-Gene standby  |
+                                | GPIO controller +------ GPIO_0
+    +------------+              |                 | ...
+    | Parent IRQ | EXT_INT_0    |                 +------ GPIO_8/EXT_INT_0
+    | controller | (SPI40)      |                 | ...
+    | (GICv2)    +--------------+                 +------ GPIO_[N+8]/EXT_INT_N
+    |            |   ...        |                 |
+    |            | EXT_INT_N    |                 +------ GPIO_[N+9]
+    |            | (SPI[40 + N])|                 | ...
+    |            +--------------+                 +------ GPIO_MAX
+    +------------+              +-----------------+
+
+properties:
+  compatible:
+    const: apm,xgene-gpio-sb
+
+  reg:
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  interrupts:
+    description:
+      List of interrupt specifiers for EXT_INT_0 through EXT_INT_N. The first
+      entry must correspond to EXT_INT_0.
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      First cell selects EXT_INT_N (0-N), second cell specifies flags
+
+  interrupt-controller: true
+
+  apm,nr-gpios:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of GPIO pins
+
+  apm,nr-irqs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of interrupt pins
+
+  apm,irq-start:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Lowest GPIO pin supporting interrupts
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@17001000 {
+        compatible = "apm,xgene-gpio-sb";
+        reg = <0x17001000 0x400>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        interrupts = <0x0 0x28 0x1>,
+                     <0x0 0x29 0x1>,
+                     <0x0 0x2a 0x1>,
+                     <0x0 0x2b 0x1>,
+                     <0x0 0x2c 0x1>,
+                     <0x0 0x2d 0x1>;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+        apm,nr-gpios = <22>;
+        apm,nr-irqs = <6>;
+        apm,irq-start = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/apple,smc-gpio.yaml b/Documentation/devicetree/bindings/gpio/apple,smc-gpio.yaml
new file mode 100644
index 000000000000..42b1bc0a10c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/apple,smc-gpio.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/apple,smc-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Mac System Management Controller GPIO
+
+maintainers:
+  - Sven Peter <sven@kernel.org>
+
+description:
+  Apple Mac System Management Controller GPIO block.
+
+properties:
+  compatible:
+    const: apple,smc-gpio
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
new file mode 100644
index 000000000000..b16273e69dfe
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/aspeed,ast2400-gpio.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed GPIO controller
+
+maintainers:
+  - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-gpio
+      - aspeed,ast2500-gpio
+      - aspeed,ast2600-gpio
+      - aspeed,ast2700-gpio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: The clock to use for debounce timings
+
+  gpio-controller: true
+  gpio-line-names:
+    minItems: 12
+    maxItems: 232
+
+  gpio-ranges: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  ngpios:
+    minimum: 12
+    maximum: 232
+
+patternProperties:
+  "-hog(-[0-9]+)?$":
+    type: object
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - gpio-controller
+  - "#gpio-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2400-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 220
+          maxItems: 220
+        ngpios:
+          const: 220
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2500-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 232
+          maxItems: 232
+        ngpios:
+          const: 232
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2600-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 36
+          maxItems: 208
+        ngpios:
+          enum: [ 36, 208 ]
+      required:
+        - ngpios
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: aspeed,ast2700-gpio
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 12
+          maxItems: 216
+        ngpios:
+          enum: [ 12, 216 ]
+      required:
+        - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@1e780000 {
+        compatible = "aspeed,ast2400-gpio";
+        reg = <0x1e780000 0x1000>;
+        interrupts = <20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+  - |
+    gpio: gpio@1e780000 {
+        compatible = "aspeed,ast2500-gpio";
+        reg = <0x1e780000 0x200>;
+        interrupts = <20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 0 232>;
+    };
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio0: gpio@1e780000 {
+        compatible = "aspeed,ast2600-gpio";
+        reg = <0x1e780000 0x400>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        gpio-ranges = <&pinctrl 0 0 208>;
+        ngpios = <208>;
+    };
+    gpio1: gpio@1e780800 {
+        compatible = "aspeed,ast2600-gpio";
+        reg = <0x1e780800 0x800>;
+        clocks = <&syscon ASPEED_CLK_APB1>;
+        interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pinctrl 0 208 36>;
+        ngpios = <36>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
index 46bb121360dc..1046f0331c09 100644
--- a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
@@ -33,6 +33,11 @@ properties:
 
   gpio-controller: true
 
+  # Each SGPIO is represented as a pair of input and output GPIOs
+  gpio-line-names:
+    minItems: 160
+    maxItems: 256
+
   '#gpio-cells':
     const: 2
 
@@ -41,6 +46,9 @@ properties:
 
   interrupt-controller: true
 
+  '#interrupt-cells':
+    const: 2
+
   clocks:
     maxItems: 1
 
@@ -55,6 +63,7 @@ required:
   - '#gpio-cells'
   - interrupts
   - interrupt-controller
+  - '#interrupt-cells'
   - ngpios
   - clocks
   - bus-frequency
@@ -72,6 +81,7 @@ examples:
         reg = <0x1e780200 0x0100>;
         clocks = <&syscon ASPEED_CLK_APB>;
         interrupt-controller;
+        #interrupt-cells = <2>;
         ngpios = <80>;
         bus-frequency = <12000000>;
     };
diff --git a/Documentation/devicetree/bindings/gpio/atmel,at91rm9200-gpio.yaml b/Documentation/devicetree/bindings/gpio/atmel,at91rm9200-gpio.yaml
new file mode 100644
index 000000000000..d810043b56b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/atmel,at91rm9200-gpio.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/atmel,at91rm9200-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip GPIO controller (PIO)
+
+maintainers:
+  - Manikandan Muralidharan <manikandan.m@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9x5-gpio
+              - microchip,sam9x60-gpio
+          - const: atmel,at91rm9200-gpio
+      - items:
+          - enum:
+              - microchip,sam9x7-gpio
+          - const: microchip,sam9x60-gpio
+          - const: atmel,at91rm9200-gpio
+      - items:
+          - const: atmel,at91rm9200-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+  gpio-line-names: true
+
+  "#gpio-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-lines":
+    description:
+      Number of gpio, 32 by default if absent
+    maxItems: 1
+    default: 32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - gpio-controller
+  - "#gpio-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@fffff400 {
+        compatible = "atmel,at91rm9200-gpio";
+        reg = <0xfffff400 0x200>;
+        interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/blaize,blzp1600-gpio.yaml b/Documentation/devicetree/bindings/gpio/blaize,blzp1600-gpio.yaml
new file mode 100644
index 000000000000..a05f6ea619c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/blaize,blzp1600-gpio.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/blaize,blzp1600-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Blaize BLZP1600 GPIO controller
+
+description:
+  Blaize BLZP1600 GPIO controller is an implementation of the VeriSilicon
+  APB GPIO v0.2 IP block. It has 32 ports each of which are intended to be
+  represented as child nodes with the generic GPIO-controller properties
+  as described in this binding's file.
+
+maintainers:
+  - Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
+  - James Cowgill <james.cowgill@blaize.com>
+  - Matt Redfearn <matt.redfearn@blaize.com>
+  - Neil Jones <neil.jones@blaize.com>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - blaize,blzp1600-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  ngpios:
+    default: 32
+    minimum: 1
+    maximum: 32
+
+  interrupts:
+    maxItems: 1
+
+  gpio-line-names: true
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+dependencies:
+  interrupt-controller: [ interrupts ]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio: gpio@4c0000 {
+      compatible = "blaize,blzp1600-gpio";
+      reg = <0x004c0000 0x1000>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      ngpios = <32>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
deleted file mode 100644
index 4d69f79df859..000000000000
--- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
+++ /dev/null
@@ -1,86 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Broadcom BCM6345 GPIO controller
-
-maintainers:
-  - Álvaro Fernández Rojas <noltari@gmail.com>
-  - Jonas Gorski <jonas.gorski@gmail.com>
-
-description: |+
-  Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers.
-
-  These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
-  are the only ones which don't need a pinctrl driver.
-
-  BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
-  and/or written, and the direction changed from input to output.
-  BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
-  and/or written, and the direction changed from input to output.
-  BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data
-  and dirout registers, where GPIO state can be read and/or written, and the
-  direction changed from input to output.
-
-properties:
-  compatible:
-    enum:
-      - brcm,bcm6318-gpio
-      - brcm,bcm6328-gpio
-      - brcm,bcm6345-gpio
-      - brcm,bcm6358-gpio
-      - brcm,bcm6362-gpio
-      - brcm,bcm6368-gpio
-      - brcm,bcm63268-gpio
-
-  gpio-controller: true
-
-  "#gpio-cells":
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
-  native-endian: true
-
-  reg:
-    maxItems: 2
-
-  reg-names:
-    items:
-      - const: dirout
-      - const: dat
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - gpio-controller
-  - '#gpio-cells'
-
-additionalProperties: false
-
-examples:
-  - |
-    gpio@fffe0406 {
-      compatible = "brcm,bcm6345-gpio";
-      reg-names = "dirout", "dat";
-      reg = <0xfffe0406 2>, <0xfffe040a 2>;
-      native-endian;
-
-      gpio-controller;
-      #gpio-cells = <2>;
-    };
-
-  - |
-    gpio@0 {
-      compatible = "brcm,bcm63268-gpio";
-      reg-names = "dirout", "dat";
-      reg = <0x0 0x8>, <0x8 0x8>;
-
-      gpio-controller;
-      gpio-ranges = <&pinctrl 0 0 52>;
-      #gpio-cells = <2>;
-    };
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml
new file mode 100644
index 000000000000..62fcc2bd5d80
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,bcm63xx-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63xx GPIO controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+  - Jonas Gorski <jonas.gorski@gmail.com>
+
+description: |+
+  Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers.
+
+  These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
+  are the only ones which don't need a pinctrl driver.
+
+  BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
+  and/or written, and the direction changed from input to output.
+  BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data
+  and dirout registers, where GPIO state can be read and/or written, and the
+  direction changed from input to output.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6318-gpio
+      - brcm,bcm6328-gpio
+      - brcm,bcm6358-gpio
+      - brcm,bcm6362-gpio
+      - brcm,bcm6368-gpio
+      - brcm,bcm63268-gpio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  native-endian: true
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: dirout
+      - const: dat
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@0 {
+      compatible = "brcm,bcm63268-gpio";
+      reg-names = "dirout", "dat";
+      reg = <0x0 0x8>, <0x8 0x8>;
+
+      gpio-controller;
+      gpio-ranges = <&pinctrl 0 0 52>;
+      #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
deleted file mode 100644
index 5d468ecd1809..000000000000
--- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Broadcom STB "UPG GIO" GPIO controller
-
-The controller's registers are organized as sets of eight 32-bit
-registers with each set controlling a bank of up to 32 pins.  A single
-interrupt is shared for all of the banks handled by the controller.
-
-Required properties:
-
-- compatible:
-    Must be "brcm,brcmstb-gpio"
-
-- reg:
-    Define the base and range of the I/O address space containing
-    the brcmstb GPIO controller registers
-
-- #gpio-cells:
-    Should be <2>.  The first cell is the pin number (within the controller's
-    pin space), and the second is used for the following:
-    bit[0]: polarity (0 for active-high, 1 for active-low)
-
-- gpio-controller:
-    Specifies that the node is a GPIO controller.
-
-- brcm,gpio-bank-widths:
-    Number of GPIO lines for each bank.  Number of elements must
-    correspond to number of banks suggested by the 'reg' property.
-
-Optional properties:
-
-- interrupts:
-    The interrupt shared by all GPIO lines for this controller.
-
-- interrupts-extended:
-    Alternate form of specifying interrupts and parents that allows for
-    multiple parents.  This takes precedence over 'interrupts' and
-    'interrupt-parent'.  Wakeup-capable GPIO controllers often route their
-    wakeup interrupt lines through a different interrupt controller than the
-    primary interrupt line, making this property necessary.
-
-- #interrupt-cells:
-    Should be <2>.  The first cell is the GPIO number, the second should specify
-    flags.  The following subset of flags is supported:
-    - bits[3:0] trigger type and level flags
-        1 = low-to-high edge triggered
-        2 = high-to-low edge triggered
-        4 = active high level-sensitive
-        8 = active low level-sensitive
-      Valid combinations are 1, 2, 3, 4, 8.
-    See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-- interrupt-controller:
-    Marks the device node as an interrupt controller
-
-- wakeup-source:
-    GPIOs for this controller can be used as a wakeup source
-
-Example:
-	upg_gio: gpio@f040a700 {
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-		gpio-controller;
-		interrupt-controller;
-		reg = <0xf040a700 0x80>;
-		interrupt-parent = <&irq0_intc>;
-		interrupts = <0x6>;
-		brcm,gpio-bank-widths = <32 32 32 24>;
-	};
-
-	upg_gio_aon: gpio@f04172c0 {
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-		gpio-controller;
-		interrupt-controller;
-		reg = <0xf04172c0 0x40>;
-		interrupt-parent = <&irq0_aon_intc>;
-		interrupts = <0x6>;
-		interrupts-extended = <&irq0_aon_intc 0x6>,
-			<&aon_pm_l2_intc 0x5>;
-		wakeup-source;
-		brcm,gpio-bank-widths = <18 4>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
new file mode 100644
index 000000000000..fbd69b4cecc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB "UPG GIO" GPIO controller
+
+description: >
+  The controller's registers are organized as sets of eight 32-bit
+  registers with each set controlling a bank of up to 32 pins.  A single
+  interrupt is shared for all of the banks handled by the controller.
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7445-gpio
+      - const: brcm,brcmstb-gpio
+
+  reg:
+    maxItems: 1
+    description: >
+      Define the base and range of the I/O address space containing
+      the brcmstb GPIO controller registers
+
+  "#gpio-cells":
+    const: 2
+    description: >
+      The first cell is the pin number (within the controller's
+      pin space), and the second is used for the following:
+      bit[0]: polarity (0 for active-high, 1 for active-low)
+
+  gpio-controller: true
+
+  brcm,gpio-bank-widths:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      Number of GPIO lines for each bank.  Number of elements must
+      correspond to number of banks suggested by the 'reg' property.
+
+  interrupts:
+    maxItems: 1
+    description: >
+      The interrupt shared by all GPIO lines for this controller.
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      The first cell is the GPIO number, the second should specify
+      flags.  The following subset of flags is supported:
+      - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+      Valid combinations are 1, 2, 3, 4, 8.
+
+  interrupt-controller: true
+
+  gpio-ranges: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 128
+
+  wakeup-source:
+    type: boolean
+    description: >
+      GPIOs for this controller can be used as a wakeup source
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - brcm,gpio-bank-widths
+
+additionalProperties: false
+
+examples:
+  - |
+    upg_gio: gpio@f040a700 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf040a700 0x80>;
+        interrupt-parent = <&irq0_intc>;
+        interrupts = <0x6>;
+        brcm,gpio-bank-widths = <32 32 32 24>;
+        gpio-ranges = <&pinctrl 0 0 120>;
+    };
+
+    upg_gio_aon: gpio@f04172c0 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf04172c0 0x40>;
+        interrupt-parent = <&irq0_aon_intc>;
+        interrupts = <0x6>;
+        wakeup-source;
+        brcm,gpio-bank-widths = <18 4>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt
deleted file mode 100644
index 4a63bc96b687..000000000000
--- a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Broadcom Kona Family GPIO
-=========================
-
-This GPIO driver is used in the following Broadcom SoCs:
-  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
-
-The Broadcom GPIO Controller IP can be configured prior to synthesis to
-support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The
-GPIO controller only supports edge, not level, triggering of interrupts.
-
-Required properties
--------------------
-
-- compatible: "brcm,bcm11351-gpio", "brcm,kona-gpio"
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The interrupt outputs from the controller. There is one GPIO
-  interrupt per GPIO bank. The number of interrupts listed depends on the
-  number of GPIO banks on the SoC. The interrupts must be ordered by bank,
-  starting with bank 0. There is always a 1:1 mapping between banks and
-  IRQs.
-- #gpio-cells: Should be <2>. The first cell is the pin number, the second
-  cell is used to specify optional parameters:
-  - bit 0 specifies polarity (0 for normal, 1 for inverted)
-  See also "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
-- #interrupt-cells: Should be <2>. The first cell is the GPIO number. The
-  second cell is used to specify flags. The following subset of flags is
-  supported:
-  - trigger type (bits[1:0]):
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      3 = low-to-high or high-to-low edge triggered
-      Valid values are 1, 2, 3
-  See also .../devicetree/bindings/interrupt-controller/interrupts.txt.
-- gpio-controller: Marks the device node as a GPIO controller.
-- interrupt-controller: Marks the device node as an interrupt controller.
-
-Example:
-	gpio: gpio@35003000 {
-		compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
-		reg = <0x35003000 0x800>;
-		interrupts =
-		       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH
-			GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml
new file mode 100644
index 000000000000..296fdd6b8f38
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,kona-gpio.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,kona-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family GPIO controller
+
+description:
+  The Broadcom GPIO Controller IP can be configured prior to synthesis to
+  support up to 8 banks of 32 GPIOs where each bank has its own IRQ. The
+  GPIO controller only supports edge, not level, triggering of interrupts.
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11351-gpio
+          - brcm,bcm21664-gpio
+          - brcm,bcm23550-gpio
+      - const: brcm,kona-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 4
+    maxItems: 6
+    description:
+      The interrupt outputs from the controller. There is one GPIO interrupt
+      per GPIO bank. The number of interrupts listed depends on the number of
+      GPIO banks on the SoC. The interrupts must be ordered by bank, starting
+      with bank 0. There is always a 1:1 mapping between banks and IRQs.
+
+  '#gpio-cells':
+    const: 2
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#gpio-cells'
+  - '#interrupt-cells'
+  - gpio-controller
+  - interrupt-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm11351-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm21664-gpio
+              - brcm,bcm23550-gpio
+    then:
+      properties:
+        interrupts:
+          maxItems: 4
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@35003000 {
+        compatible = "brcm,bcm11351-gpio", "brcm,kona-gpio";
+        reg = <0x35003000 0x800>;
+        interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        gpio-controller;
+        interrupt-controller;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
index c213cb9ddb9f..5cfefbbea6ca 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
@@ -66,5 +66,4 @@ examples:
         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
     };
 
-
 ...
diff --git a/Documentation/devicetree/bindings/gpio/cavium,octeon-3860-gpio.yaml b/Documentation/devicetree/bindings/gpio/cavium,octeon-3860-gpio.yaml
new file mode 100644
index 000000000000..35155b900655
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cavium,octeon-3860-gpio.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cavium,octeon-3860-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cavium Octeon 3860 GPIO controller
+
+maintainers:
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+
+properties:
+  compatible:
+    const: cavium,octeon-3860-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 16
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gpio@1070000000800 {
+            compatible = "cavium,octeon-3860-gpio";
+            reg = <0x10700 0x00000800 0x0 0x100>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            /* The GPIO pin connect to 16 consecutive CUI bits */
+            interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
+                        <0 20>, <0 21>, <0 22>, <0 23>,
+                        <0 24>, <0 25>, <0 26>, <0 27>,
+                        <0 28>, <0 29>, <0 30>, <0 31>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt b/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt
deleted file mode 100644
index 9d6dcd3fe7f9..000000000000
--- a/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* General Purpose Input Output (GPIO) bus.
-
-Properties:
-- compatible: "cavium,octeon-3860-gpio"
-
-  Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
-
-- reg: The base address of the GPIO unit's register bank.
-
-- gpio-controller: This is a GPIO controller.
-
-- #gpio-cells: Must be <2>.  The first cell is the GPIO pin.
-
-- interrupt-controller: The GPIO controller is also an interrupt
-  controller, many of its pins may be configured as an interrupt
-  source.
-
-- #interrupt-cells: Must be <2>.  The first cell is the GPIO pin
-   connected to the interrupt source.  The second cell is the interrupt
-   triggering protocol and may have one of four values:
-   1 - edge triggered on the rising edge.
-   2 - edge triggered on the falling edge
-   4 - level triggered active high.
-   8 - level triggered active low.
-
-- interrupts: Interrupt routing for each pin.
-
-Example:
-
-	gpio-controller@1070000000800 {
-		#gpio-cells = <2>;
-		compatible = "cavium,octeon-3860-gpio";
-		reg = <0x10700 0x00000800 0x0 0x100>;
-		gpio-controller;
-		/* Interrupts are specified by two parts:
-		 * 1) GPIO pin number (0..15)
-		 * 2) Triggering (1 - edge rising
-		 *		  2 - edge falling
-		 *		  4 - level active high
-		 *		  8 - level active low)
-		 */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		/* The GPIO pin connect to 16 consecutive CUI bits */
-		interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
-			     <0 20>, <0 21>, <0 22>, <0 23>,
-			     <0 24>, <0 25>, <0 26>, <0 27>,
-			     <0 28>, <0 29>, <0 30>, <0 31>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt b/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
deleted file mode 100644
index 706ef00f5c64..000000000000
--- a/Documentation/devicetree/bindings/gpio/cdns,gpio.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Cadence GPIO controller bindings
-
-Required properties:
-- compatible: should be "cdns,gpio-r1p02".
-- reg: the register base address and size.
-- #gpio-cells: should be 2.
-	* first cell is the GPIO number.
-	* second cell specifies the GPIO flags, as defined in
-		<dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH
-		and GPIO_ACTIVE_LOW flags are supported.
-- gpio-controller: marks the device as a GPIO controller.
-- clocks: should contain one entry referencing the peripheral clock driving
-	the GPIO controller.
-
-Optional properties:
-- ngpios: integer number of gpio lines supported by this controller, up to 32.
-- interrupts: interrupt specifier for the controllers interrupt.
-- interrupt-controller: marks the device as an interrupt controller. When
-	defined, interrupts, interrupt-parent and #interrupt-cells
-	are required.
-- interrupt-cells: should be 2.
-	* first cell is the GPIO number you want to use as an IRQ source.
-	* second cell specifies the IRQ type, as defined in
-		<dt-bindings/interrupt-controller/irq.h>.
-		Currently only level sensitive IRQs are supported.
-
-
-Example:
-	gpio0: gpio-controller@fd060000 {
-		compatible = "cdns,gpio-r1p02";
-		reg =<0xfd060000 0x1000>;
-
-		clocks = <&gpio_clk>;
-
-		interrupt-parent = <&gic>;
-		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml
new file mode 100644
index 000000000000..a84d60b39459
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cdns,gpio.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/cdns,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence GPIO Controller
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: cdns,gpio-r1p02
+      - items:
+          - enum:
+              - axiado,ax3000-gpio
+          - const: cdns,gpio-r1p02
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      - First cell is the GPIO line number.
+      - Second cell is flags as defined in <dt-bindings/gpio/gpio.h>,
+        only GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW supported.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      - First cell is the GPIO line number used as IRQ.
+      - Second cell is the trigger type, as defined in
+        <dt-bindings/interrupt-controller/irq.h>.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+
+if:
+  required: [interrupt-controller]
+then:
+  required:
+    - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio0: gpio-controller@fd060000 {
+        compatible = "cdns,gpio-r1p02";
+        reg = <0xfd060000 0x1000>;
+        clocks = <&gpio_clk>;
+
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt b/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt
deleted file mode 100644
index fd42e7280f72..000000000000
--- a/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs
-
-Required properties:
-- compatible: Should contain "cirrus,ep7209-mctrl-gpio".
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be two. The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-    0 = Active high,
-    1 = Active low.
-
-Example:
-	sysgpio: sysgpio {
-		compatible = "cirrus,ep7312-mctrl-gpio",
-			     "cirrus,ep7209-mctrl-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.yaml b/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.yaml
new file mode 100644
index 000000000000..bdffca817f1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/cirrus,clps711x-mctrl-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: cirrus,ep7312-mctrl-gpio
+          - const: cirrus,ep7209-mctrl-gpio
+      - const: cirrus,ep7209-mctrl-gpio
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio,syscon-dev:
+    description:
+      Phandle and offset of device's specific registers within the syscon state
+      control registers
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon
+          - description: register offset within state control registers
+
+required:
+  - compatible
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    sysgpio: sysgpio {
+        compatible = "cirrus,ep7312-mctrl-gpio",
+                     "cirrus,ep7209-mctrl-gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
new file mode 100644
index 000000000000..e3e668a12091
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/delta,tn48m-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD GPIO controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  This module is part of the Delta TN48M multi-function device. For more
+  details see ../mfd/delta,tn48m-cpld.yaml.
+
+  Delta TN48M has an onboard Lattice CPLD that is used as an GPIO expander.
+  It provides 12 pins in total, they are input-only or ouput-only type.
+
+properties:
+  compatible:
+    enum:
+      - delta,tn48m-gpo
+      - delta,tn48m-gpi
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/exar,xra1403.yaml b/Documentation/devicetree/bindings/gpio/exar,xra1403.yaml
new file mode 100644
index 000000000000..053134faf475
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/exar,xra1403.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/exar,xra1403.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: XRA1403 16-bit GPIO Expander with Reset Input
+
+maintainers:
+  - Nandor Han <nandor.han@ge.com>
+
+description: >
+  The XRA1403 is an 16-bit GPIO expander with an SPI interface. Features
+  available:
+
+    - Individually programmable inputs:
+        - Internal pull-up resistors
+        - Polarity inversion
+        - Individual interrupt enable
+        - Rising edge and/or Falling edge interrupt
+        - Input filter
+    - Individually programmable outputs:
+        - Output Level Control
+        - Output Three-State Control
+
+properties:
+  compatible:
+    const: exar,xra1403
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  reset-gpios:
+    description: Control line for the device reset.
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@2 {
+            compatible = "exar,xra1403";
+            reg = <2>;
+            spi-max-frequency = <1000000>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
index 5fe19fa5f67c..23410aeca300 100644
--- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
+++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
@@ -6,6 +6,22 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Generic 8-bit shift register
 
+description: |
+  NOTE: These chips nominally don't have a chip select pin. They do however
+  have a rising-edge triggered latch clock (or storage register clock) pin,
+  which behaves like an active-low chip select.
+
+  After the bits are shifted into the shift register, CS# is driven high, which
+  the 74HC595 sees as a rising edge on the latch clock that results in a
+  transfer of the bits from the shift register to the storage register and thus
+  to the output pins.
+                      _   _       _   _
+  shift clock    ____| |_| |_..._| |_| |_________
+
+  latch clock                           * trigger
+                 ___                     ________
+  chip select#      |___________________|
+
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
@@ -26,30 +42,18 @@ properties:
     const: 2
 
   registers-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Number of daisy-chained shift registers
 
   enable-gpios:
     description: GPIO connected to the OE (Output Enable) pin.
     maxItems: 1
 
-  spi-max-frequency: true
-
 patternProperties:
   "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
     type: object
-
-    properties:
-      gpio-hog: true
-      gpios: true
-      output-high: true
-      output-low: true
-      line-name: true
-
     required:
       - gpio-hog
-      - gpios
-
-    additionalProperties: false
 
 required:
   - compatible
@@ -58,20 +62,23 @@ required:
   - '#gpio-cells'
   - registers-number
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     spi {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            gpio5: gpio5@0 {
-                    compatible = "fairchild,74hc595";
-                    reg = <0>;
-                    gpio-controller;
-                    #gpio-cells = <2>;
-                    registers-number = <4>;
-                    spi-max-frequency = <100000>;
-            };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio5@0 {
+            compatible = "fairchild,74hc595";
+            reg = <0>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            registers-number = <4>;
+            spi-max-frequency = <100000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt
deleted file mode 100644
index d04236558619..000000000000
--- a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Faraday Technology FTGPIO010 GPIO Controller
-
-Required properties:
-
-- compatible : Should be one of
-  "cortina,gemini-gpio", "faraday,ftgpio010"
-  "moxa,moxart-gpio", "faraday,ftgpio010"
-  "faraday,ftgpio010"
-- reg : Should contain registers location and length
-- interrupts : Should contain the interrupt line for the GPIO block
-- gpio-controller : marks this as a GPIO controller
-- #gpio-cells : Should be 2, see gpio/gpio.txt
-- interrupt-controller : marks this as an interrupt controller
-- #interrupt-cells : a standard two-cell interrupt flag, see
-  interrupt-controller/interrupts.txt
-
-Example:
-
-gpio@4d000000 {
-	compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
-	reg = <0x4d000000 0x100>;
-	interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
new file mode 100644
index 000000000000..640da5b9b0cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/faraday,ftgpio010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTGPIO010 GPIO Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: cortina,gemini-gpio
+          - const: faraday,ftgpio010
+      - items:
+          - const: moxa,moxart-gpio
+          - const: faraday,ftgpio010
+      - const: faraday,ftgpio010
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Should contain the interrupt line for the GPIO block
+
+  gpio-controller: true
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio@4d000000 {
+      compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+      reg = <0x4d000000 0x100>;
+      interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml
new file mode 100644
index 000000000000..b7b32220935d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl,imx8qxp-sc-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver over IMX SCU firmware API
+
+maintainers:
+  - Shenwei Wang <shenwei.wang@nxp.com>
+
+description: |
+  This module provides the standard interface to control the
+  resource pins in SCU domain on i.MX8 platforms.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-sc-gpio
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio {
+        compatible = "fsl,imx8qxp-sc-gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml
new file mode 100644
index 000000000000..4cb2a6b9fabf
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl,qoriq-gpio.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl,qoriq-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,mpc5121-gpio
+          - fsl,mpc5125-gpio
+          - fsl,mpc8314-gpio
+          - fsl,mpc8349-gpio
+          - fsl,mpc8572-gpio
+          - fsl,mpc8610-gpio
+          - fsl,pq3-gpio
+      - items:
+          - enum:
+              - fsl,ls1021a-gpio
+              - fsl,ls1028a-gpio
+              - fsl,ls1043a-gpio
+              - fsl,ls1046a-gpio
+              - fsl,ls1088a-gpio
+              - fsl,ls2080a-gpio
+          - const: fsl,qoriq-gpio
+      - items:
+          - enum:
+              - fsl,mpc8308-gpio
+              - fsl,mpc8377-gpio
+              - fsl,mpc8378-gpio
+              - fsl,mpc8379-gpio
+          - const: fsl,mpc8349-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+  little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      GPIO registers are used as little endian. If not
+      present registers are used as big endian by default.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@1100 {
+        compatible = "fsl,mpc5125-gpio";
+        reg = <0x1100 0x080>;
+        interrupts = <78 0x8>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpio@2300000 {
+        compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
+        reg = <0x2300000 0x10000>;
+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+        little-endian;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
index f57d22d1ebd6..6b06609c649e 100644
--- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale i.MX/MXC GPIO controller
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 properties:
   compatible:
@@ -19,10 +21,18 @@ properties:
           - fsl,imx35-gpio
           - fsl,imx7d-gpio
       - items:
+          - enum:
+              - fsl,imx27-gpio
+          - const: fsl,imx21-gpio
+      - items:
           - const: fsl,imx35-gpio
           - const: fsl,imx31-gpio
       - items:
           - enum:
+              - fsl,imx25-gpio
+          - const: fsl,imx35-gpio
+      - items:
+          - enum:
               - fsl,imx50-gpio
               - fsl,imx51-gpio
               - fsl,imx53-gpio
@@ -32,11 +42,15 @@ properties:
               - fsl,imx6sx-gpio
               - fsl,imx6ul-gpio
               - fsl,imx7d-gpio
+              - fsl,imx8dxl-gpio
               - fsl,imx8mm-gpio
               - fsl,imx8mn-gpio
               - fsl,imx8mp-gpio
               - fsl,imx8mq-gpio
+              - fsl,imx8qm-gpio
               - fsl,imx8qxp-gpio
+              - fsl,imxrt1050-gpio
+              - fsl,imxrt1170-gpio
           - const: fsl,imx35-gpio
 
   reg:
@@ -71,19 +85,8 @@ properties:
 patternProperties:
   "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
     type: object
-    properties:
-      gpio-hog: true
-      gpios: true
-      input: true
-      output-high: true
-      output-low: true
-      line-name: true
-
     required:
       - gpio-hog
-      - gpios
-
-    additionalProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt
deleted file mode 100644
index bef353f370d8..000000000000
--- a/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Fujitsu MB86S7x GPIO Controller
--------------------------------
-
-Required properties:
-- compatible: Should be "fujitsu,mb86s70-gpio"
-- reg: Base address and length of register space
-- clocks: Specify the clock
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be <2>. The first cell is the pin number and the
-  second cell is used to specify optional parameters:
-   - bit 0 specifies polarity (0 for normal, 1 for inverted).
-
-Examples:
-	gpio0: gpio@31000000 {
-		compatible = "fujitsu,mb86s70-gpio";
-		reg = <0 0x31000000 0x10000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		clocks = <&clk 0 2 1>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml
new file mode 100644
index 000000000000..d18d95285465
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fujitsu,mb86s70-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fujitsu MB86S7x GPIO Controller
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: socionext,synquacer-gpio
+          - const: fujitsu,mb86s70-gpio
+      - const: fujitsu,mb86s70-gpio
+
+  reg:
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+  gpio-line-names: true
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@31000000 {
+        compatible = "fujitsu,mb86s70-gpio";
+        reg = <0x31000000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        clocks = <&clk 0 2 1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
deleted file mode 100644
index 6e81f8b755c5..000000000000
--- a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Gateworks PLD GPIO controller bindings
-
-The GPIO controller should be a child node on an I2C bus,
-see: i2c/i2c.txt for details.
-
-Required properties:
-- compatible: Should be "gateworks,pld-gpio"
-- reg: I2C slave address
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the gpio number and
-  the second cell is used to specify optional parameters.
-
-Example:
-
-pld@56 {
-	compatible = "gateworks,pld-gpio";
-	reg = <0x56>;
-	gpio-controller;
-	#gpio-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt b/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt
deleted file mode 100644
index 7bb1a9d60133..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-74xx-mmio.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* 74XX MMIO GPIO driver
-
-Required properties:
-- compatible: Should contain one of the following:
-   "ti,741g125": for 741G125 (1-bit Input),
-   "ti,741g174": for 741G74 (1-bit Output),
-   "ti,742g125": for 742G125 (2-bit Input),
-   "ti,7474"   : for 7474 (2-bit Output),
-   "ti,74125"  : for 74125 (4-bit Input),
-   "ti,74175"  : for 74175 (4-bit Output),
-   "ti,74365"  : for 74365 (6-bit Input),
-   "ti,74174"  : for 74174 (6-bit Output),
-   "ti,74244"  : for 74244 (8-bit Input),
-   "ti,74273"  : for 74273 (8-bit Output),
-   "ti,741624" : for 741624 (16-bit Input),
-   "ti,7416374": for 7416374 (16-bit Output).
-- reg: Physical base address and length where IC resides.
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be two. The first cell is the pin number and
-   the second cell is used to specify the GPIO polarity:
-    0 = Active High,
-    1 = Active Low.
-
-Example:
-	ctrl: gpio@30008004 {
-		compatible = "ti,74174";
-		reg = <0x30008004 0x1>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
deleted file mode 100644
index 146e554b3c67..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Altera GPIO controller bindings
-
-Required properties:
-- compatible:
-  - "altr,pio-1.0"
-- reg: Physical base address and length of the controller's registers.
-- #gpio-cells : Should be 2
-  - The first cell is the gpio offset number.
-  - The second cell is reserved and is currently unused.
-- gpio-controller : Marks the device node as a GPIO controller.
-- interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
-  - The first cell is the GPIO offset number within the GPIO controller.
-- interrupts: Specify the interrupt.
-- altr,interrupt-type: Specifies the interrupt trigger type the GPIO
-  hardware is synthesized. This field is required if the Altera GPIO controller
-  used has IRQ enabled as the interrupt type is not software controlled,
-  but hardware synthesized. Required if GPIO is used as an interrupt
-  controller. The value is defined in <dt-bindings/interrupt-controller/irq.h>
-  Only the following flags are supported:
-    IRQ_TYPE_EDGE_RISING
-    IRQ_TYPE_EDGE_FALLING
-    IRQ_TYPE_EDGE_BOTH
-    IRQ_TYPE_LEVEL_HIGH
-
-Optional properties:
-- altr,ngpio: Width of the GPIO bank. This defines how many pins the
-  GPIO device has. Ranges between 1-32. Optional and defaults to 32 if not
-  specified.
-
-Example:
-
-gpio_altr: gpio@ff200000 {
-	compatible = "altr,pio-1.0";
-	reg = <0xff200000 0x10>;
-	interrupts = <0 45 4>;
-	altr,ngpio = <32>;
-	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
-	#gpio-cells = <2>;
-	gpio-controller;
-	#interrupt-cells = <1>;
-	interrupt-controller;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
deleted file mode 100644
index b2033fc3a71a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Aspeed GPIO controller Device Tree Bindings
--------------------------------------------
-
-Required properties:
-- compatible		: Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio",
-					or "aspeed,ast2600-gpio".
-
-- #gpio-cells 		: Should be two
-			  - First cell is the GPIO line number
-			  - Second cell is used to specify optional
-			    parameters (unused)
-
-- reg			: Address and length of the register set for the device
-- gpio-controller	: Marks the device node as a GPIO controller.
-- interrupts		: Interrupt specifier (see interrupt bindings for
-			  details)
-- interrupt-controller	: Mark the GPIO controller as an interrupt-controller
-
-Optional properties:
-
-- clocks		: A phandle to the clock to use for debounce timings
-- ngpios		: Number of GPIOs controlled by this controller. Should	be set
-				  when there are multiple GPIO controllers on a SoC (ast2600).
-
-The gpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-  Example:
-	gpio@1e780000 {
-		#gpio-cells = <2>;
-		compatible = "aspeed,ast2400-gpio";
-		gpio-controller;
-		interrupts = <20>;
-		reg = <0x1e780000 0x1000>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
deleted file mode 100644
index cf71f3ec969d..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-ath79.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller
-
-Required properties:
-- compatible: has to be "qca,<soctype>-gpio" and one of the following
-  fallbacks:
-  - "qca,ar7100-gpio"
-  - "qca,ar9340-gpio"
-- reg: Base address and size of the controllers memory area
-- gpio-controller : Marks the device node as a GPIO controller.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters.
-- ngpios: Should be set to the number of GPIOs available on the SoC.
-
-Optional properties:
-- interrupts: Interrupt specifier for the controllers interrupt.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode interrupt
-		     source, should be 2
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Example:
-
-	gpio@18040000 {
-		compatible = "qca,ar9132-gpio", "qca,ar7100-gpio";
-		reg = <0x18040000 0x30>;
-		interrupts = <2>;
-
-		ngpios = <22>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt b/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
deleted file mode 100644
index 0a304ad29d81..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-clps711x.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Cirrus Logic CLPS711X GPIO controller
-
-Required properties:
-- compatible: Should be "cirrus,ep7209-gpio"
-- reg: Physical base GPIO controller registers location and length.
-  There should be two registers, first is DATA register, the second
-  is DIRECTION.
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be two. The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-    0 = active high
-    1 = active low
-
-Note: Each GPIO port should have an alias correctly numbered in "aliases"
-node.
-
-Example:
-
-aliases {
-	gpio0 = &porta;
-};
-
-porta: gpio@80000000 {
-	compatible = "cirrus,ep7312-gpio","cirrus,ep7209-gpio";
-	reg = <0x80000000 0x1>, <0x80000040 0x1>;
-	gpio-controller;
-	#gpio-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
new file mode 100644
index 000000000000..40d0be31e200
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-consumer-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common GPIO lines
+
+maintainers:
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Pay attention to using proper GPIO flag (e.g. GPIO_ACTIVE_LOW) for the GPIOs
+  using inverted signal (e.g. RESETN).
+
+select: true
+
+properties:
+  enable-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the enable control pin.
+
+  reset-gpios:
+    description:
+      GPIO (or GPIOs for power sequence) connected to the device reset pin
+      (e.g. RESET or RESETN).
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the power down pin (hardware power down or power cut,
+      e.g. PD or PWDN).
+
+  pwdn-gpios:
+    maxItems: 1
+    description: Use powerdown-gpios
+    deprecated: true
+
+  wakeup-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the pin waking up the device from suspend or other
+      power-saving modes.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mmc-pwrseq-simple
+    then:
+      properties:
+        reset-gpios:
+          minItems: 1
+          maxItems: 32
+    else:
+      properties:
+        reset-gpios:
+          maxItems: 1
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
index f32e09ef937c..1434d08f8b74 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
@@ -32,10 +32,12 @@ properties:
 
   gpio-ranges: true
 
+  gpio-reserved-ranges: true
+
   gpio-line-names:
     description: strings describing the names of each gpio line.
     minItems: 1
-    maxItems: 100
+    maxItems: 144
 
   "#gpio-cells":
     const: 2
diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
new file mode 100644
index 000000000000..1cebc4058e27
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-delay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO delay controller
+
+maintainers:
+  - Alexander Stein <linux@ew.tq-group.com>
+
+description: |
+  This binding describes an electrical setup where setting an GPIO output
+  is delayed by some external setup, e.g. RC circuit.
+
+  +----------+                    +-----------+
+  |          |             VCC_B  |           |
+  |          |              |     |           |
+  |          | VCC_A        _     |           |
+  |  GPIO    |             | | R  |  Consumer |
+  |controller|        ___  |_|    |           |
+  |          |       |   |  |     |           |
+  |      [IOx|-------|   |--+-----|-----+     |
+  |          |       |___|  |     |   input   |
+  |          |              |     |           |
+  +----------+             --- C  +-----------+
+                           ---
+                            |
+                            -
+                           GND
+
+  If the input on the consumer is controlled by an open-drain signal
+  attached to an RC circuit the ramp-up delay is not under control
+  of the GPIO controller.
+
+properties:
+  compatible:
+    const: gpio-delay
+
+  "#gpio-cells":
+    description: |
+      Specifies the pin, ramp-up and ramp-down delays. The
+      delays are specified in microseconds.
+    const: 3
+
+  gpios:
+    description: Array of GPIOs which output signal change is delayed
+    minItems: 1
+    maxItems: 32
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    enable_delay: enable-delay {
+        compatible = "gpio-delay";
+        #gpio-cells = <3>;
+        gpio-controller;
+        gpios = <&gpio0 3 GPIO_ACTIVE_LOW>,
+                <&gpio3 1 GPIO_ACTIVE_HIGH>;
+    };
+
+    consumer {
+        enable-gpios = <&enable_delay 0 130000 30000>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
deleted file mode 100644
index 0423699d74c7..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Keystone 2 DSP GPIO controller bindings
-
-HOST OS userland running on ARM can send interrupts to DSP cores using
-the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core.
-This is one of the component used by the IPC mechanism used on Keystone SOCs.
-
-For example TCI6638K2K SoC has 8 DSP GPIO controllers:
- - 8 for C66x CorePacx CPUs 0-7
-
-Keystone 2 DSP GPIO controller has specific features:
-- each GPIO can be configured only as output pin;
-- setting GPIO value to 1 causes IRQ generation on target DSP core;
-- reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still
-  pending.
-
-Required Properties:
-- compatible: should be "ti,keystone-dsp-gpio"
-- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to
-  access device state control registers and the offset of device's specific
-  registers within device state control registers range.
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be 2.
-
-Please refer to gpio.txt in this directory for details of the common GPIO
-bindings used by client devices.
-
-Example:
-	dspgpio0: keystone_dsp_gpio@2620240 {
-		compatible = "ti,keystone-dsp-gpio";
-		ti,syscon-dev = <&devctrl 0x240>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	dsp0: dsp0 {
-		compatible = "linux,rproc-user";
-		...
-		kick-gpio = <&dspgpio0 27>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt b/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
deleted file mode 100644
index 54040a2bfe3a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-Spreadtrum EIC controller bindings
-
-The EIC is the abbreviation of external interrupt controller, which can
-be used only in input mode. The Spreadtrum platform has 2 EIC controllers,
-one is in digital chip, and another one is in PMIC. The digital chip EIC
-controller contains 4 sub-modules: EIC-debounce, EIC-latch, EIC-async and
-EIC-sync. But the PMIC EIC controller contains only one EIC-debounce sub-
-module.
-
-The EIC-debounce sub-module provides up to 8 source input signal
-connections. A debounce mechanism is used to capture the input signals'
-stable status (millisecond resolution) and a single-trigger mechanism
-is introduced into this sub-module to enhance the input event detection
-reliability. In addition, this sub-module's clock can be shut off
-automatically to reduce power dissipation. Moreover the debounce range
-is from 1ms to 4s with a step size of 1ms. The input signal will be
-ignored if it is asserted for less than 1 ms.
-
-The EIC-latch sub-module is used to latch some special power down signals
-and generate interrupts, since the EIC-latch does not depend on the APB
-clock to capture signals.
-
-The EIC-async sub-module uses a 32kHz clock to capture the short signals
-(microsecond resolution) to generate interrupts by level or edge trigger.
-
-The EIC-sync is similar with GPIO's input function, which is a synchronized
-signal input register. It can generate interrupts by level or edge trigger
-when detecting input signals.
-
-Required properties:
-- compatible: Should be one of the following:
-  "sprd,sc9860-eic-debounce",
-  "sprd,sc9860-eic-latch",
-  "sprd,sc9860-eic-async",
-  "sprd,sc9860-eic-sync",
-  "sprd,sc2731-eic".
-- reg: Define the base and range of the I/O address space containing
-  the GPIO controller registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the gpio number and
-  the second cell is used to specify optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be <2>. Specifies the number of cells needed
-  to encode interrupt source.
-- interrupts: Should be the port interrupt shared by all the gpios.
-
-Example:
-	eic_debounce: gpio@40210000 {
-		compatible = "sprd,sc9860-eic-debounce";
-		reg = <0 0x40210000 0 0x80>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	eic_latch: gpio@40210080 {
-		compatible = "sprd,sc9860-eic-latch";
-		reg = <0 0x40210080 0 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	eic_async: gpio@402100a0 {
-		compatible = "sprd,sc9860-eic-async";
-		reg = <0 0x402100a0 0 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	eic_sync: gpio@402100c0 {
-		compatible = "sprd,sc9860-eic-sync";
-		reg = <0 0x402100c0 0 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pmic_eic: gpio@300 {
-		compatible = "sprd,sc2731-eic";
-		reg = <0x300>;
-		interrupt-parent = <&sc2731_pmic>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
new file mode 100644
index 000000000000..3a1079d6ee20
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-ep9301.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EP93xx GPIO controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+  - Nikita Shubin <nikita.shubin@maquefel.me>
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9301-gpio
+      - items:
+          - enum:
+              - cirrus,ep9302-gpio
+              - cirrus,ep9307-gpio
+              - cirrus,ep9312-gpio
+              - cirrus,ep9315-gpio
+          - const: cirrus,ep9301-gpio
+
+  reg:
+    minItems: 2
+    items:
+      - description: data register
+      - description: direction register
+      - description: interrupt registers base
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: data
+      - const: dir
+      - const: intr
+
+  gpio-controller: true
+
+  gpio-ranges: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    oneOf:
+      - maxItems: 1
+      - description: port F has dedicated irq line for each gpio line
+        maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@80840000 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840000 0x04>,
+            <0x80840010 0x04>,
+            <0x80840090 0x1c>;
+      reg-names = "data", "dir", "intr";
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupt-parent = <&vic1>;
+      interrupts = <27>;
+    };
+
+    gpio@80840004 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840004 0x04>,
+            <0x80840014 0x04>,
+            <0x808400ac 0x1c>;
+      reg-names = "data", "dir", "intr";
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupt-parent = <&vic1>;
+      interrupts = <27>;
+    };
+
+    gpio@80840008 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840008 0x04>,
+            <0x80840018 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@8084000c {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x8084000c 0x04>,
+            <0x8084001c 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@80840020 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840020 0x04>,
+            <0x80840024 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@80840030 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840030 0x04>,
+            <0x80840034 0x04>,
+            <0x8084004c 0x1c>;
+      reg-names = "data", "dir", "intr";
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts-extended = <&vic0 19>, <&vic0 20>,
+                            <&vic0 21>, <&vic0 22>,
+                            <&vic1 15>, <&vic1 16>,
+                            <&vic1 17>, <&vic1 18>;
+    };
+
+    gpio@80840038 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840038 0x04>,
+            <0x8084003c 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@80840040 {
+      compatible = "cirrus,ep9301-gpio";
+      reg = <0x80840040 0x04>,
+            <0x80840044 0x04>;
+      reg-names = "data", "dir";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-latch.yaml b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
new file mode 100644
index 000000000000..1ed82a2cebda
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-latch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO latch controller
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+  This binding describes a GPIO multiplexer based on latches connected to
+  other GPIOs, like this:
+
+  CLK0 ----------------------.        ,--------.
+  CLK1 -------------------.  `--------|>    #0 |
+                          |           |        |
+  OUT0 ----------------+--|-----------|D0    Q0|-----|<
+  OUT1 --------------+-|--|-----------|D1    Q1|-----|<
+  OUT2 ------------+-|-|--|-----------|D2    Q2|-----|<
+  OUT3 ----------+-|-|-|--|-----------|D3    Q3|-----|<
+  OUT4 --------+-|-|-|-|--|-----------|D4    Q4|-----|<
+  OUT5 ------+-|-|-|-|-|--|-----------|D5    Q5|-----|<
+  OUT6 ----+-|-|-|-|-|-|--|-----------|D6    Q6|-----|<
+  OUT7 --+-|-|-|-|-|-|-|--|-----------|D7    Q7|-----|<
+         | | | | | | | |  |           `--------'
+         | | | | | | | |  |
+         | | | | | | | |  |           ,--------.
+         | | | | | | | |  `-----------|>    #1 |
+         | | | | | | | |              |        |
+         | | | | | | | `--------------|D0    Q0|-----|<
+         | | | | | | `----------------|D1    Q1|-----|<
+         | | | | | `------------------|D2    Q2|-----|<
+         | | | | `--------------------|D3    Q3|-----|<
+         | | | `----------------------|D4    Q4|-----|<
+         | | `------------------------|D5    Q5|-----|<
+         | `--------------------------|D6    Q6|-----|<
+         `----------------------------|D7    Q7|-----|<
+                                      `--------'
+
+  The number of clk-gpios and latched-gpios is not fixed. The actual number
+  of number of latches and the number of inputs per latch is derived from
+  the number of GPIOs given in the corresponding device tree properties.
+
+properties:
+  compatible:
+    const: gpio-latch
+  "#gpio-cells":
+    const: 2
+
+  clk-gpios:
+    description: Array of GPIOs to be used to clock a latch
+
+  latched-gpios:
+    description: Array of GPIOs to be used as inputs per latch
+
+  setup-duration-ns:
+    description: Delay in nanoseconds to wait after the latch inputs have been
+      set up
+
+  clock-duration-ns:
+    description: Delay in nanoseconds to wait between clock output changes
+
+  gpio-controller: true
+
+  gpio-line-names: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+  - clk-gpios
+  - latched-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-latch {
+        #gpio-cells = <2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_di_do_leds>;
+        compatible = "gpio-latch";
+        gpio-controller;
+        setup-duration-ns = <100>;
+        clock-duration-ns = <100>;
+
+        clk-gpios = <&gpio3 7 0>, <&gpio3 8 0>;
+        latched-gpios = <&gpio3 21 0>, <&gpio3 22 0>,
+                       <&gpio3 23 0>, <&gpio3 24 0>,
+                       <&gpio3 25 0>, <&gpio3 26 0>,
+                       <&gpio3 27 0>, <&gpio3 28 0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt b/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
deleted file mode 100644
index 80fcb7d70e13..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-TI/National Semiconductor LP3943 GPIO controller
-
-Required properties:
-  - compatible: "ti,lp3943-gpio"
-  - gpio-controller: Marks the device node as a GPIO controller.
-  - #gpio-cells: Should be 2. See gpio.txt in this directory for a
-                 description of the cells format.
-
-Example:
-Simple LED controls with LP3943 GPIO controller
-
-&i2c4 {
-	lp3943@60 {
-		compatible = "ti,lp3943";
-		reg = <0x60>;
-
-		gpioex: gpio {
-			compatible = "ti,lp3943-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-};
-
-leds {
-	compatible = "gpio-leds";
-	indicator1 {
-		label = "indi1";
-		gpios = <&gpioex 9 GPIO_ACTIVE_LOW>;
-	};
-
-	indicator2 {
-		label = "indi2";
-		gpios = <&gpioex 10 GPIO_ACTIVE_LOW>;
-		default-state = "off";
-	};
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt b/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt
deleted file mode 100644
index b3a6444b8f45..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-GPIO driver for Maxim MAX3191x industrial serializer
-
-Required properties:
- - compatible:		Must be one of:
-			"maxim,max31910"
-			"maxim,max31911"
-			"maxim,max31912"
-			"maxim,max31913"
-			"maxim,max31953"
-			"maxim,max31963"
- - reg: 		Chip select number.
- - gpio-controller:	Marks the device node as a GPIO controller.
- - #gpio-cells: 	Should be two. For consumer use see gpio.txt.
-
-Optional properties:
- - #daisy-chained-devices:
-			Number of chips in the daisy-chain (default is 1).
- - maxim,modesel-gpios: GPIO pins to configure modesel of each chip.
-			The number of GPIOs must equal "#daisy-chained-devices"
-			(if each chip is driven by a separate pin) or 1
-			(if all chips are wired to the same pin).
- - maxim,fault-gpios: 	GPIO pins to read fault of each chip.
-			The number of GPIOs must equal "#daisy-chained-devices"
-			or 1.
- - maxim,db0-gpios:	GPIO pins to configure debounce of each chip.
-			The number of GPIOs must equal "#daisy-chained-devices"
-			or 1.
- - maxim,db1-gpios:	GPIO pins to configure debounce of each chip.
-			The number of GPIOs must equal "maxim,db0-gpios".
- - maxim,modesel-8bit:	Boolean whether the modesel pin of the chips is
-			pulled high (8-bit mode).  Use this if the modesel pin
-			is hardwired and consequently "maxim,modesel-gpios"
-			cannot be specified.  By default if neither this nor
-			"maxim,modesel-gpios" is given, the driver assumes
-			that modesel is pulled low (16-bit mode).
- - maxim,ignore-undervoltage:
-			Boolean whether to ignore undervoltage alarms signaled
-			by the "maxim,fault-gpios" or by the status byte
-			(in 16-bit mode).  Use this if the chips are powered
-			through 5VOUT instead of VCC24V, in which case they
-			will constantly signal undervoltage.
-
-For other required and optional properties of SPI slave nodes please refer to
-../spi/spi-bus.txt.
-
-Example:
-	gpio@0 {
-		compatible = "maxim,max31913";
-		reg = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		maxim,modesel-gpios = <&gpio2 23>;
-		maxim,fault-gpios   = <&gpio2 24 GPIO_ACTIVE_LOW>;
-		maxim,db0-gpios     = <&gpio2 25>;
-		maxim,db1-gpios     = <&gpio2 26>;
-
-		spi-max-frequency = <25000000>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt b/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
deleted file mode 100644
index 410e716fd3d2..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-max77620.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-GPIO driver for MAX77620 Power management IC from Maxim Semiconductor.
-
-Device has 8 GPIO pins which can be configured as GPIO as well as the
-special IO functions.
-
-Required properties:
--------------------
-- gpio-controller : 	Marks the device node as a gpio controller.
-- #gpio-cells : 	Should be two.  The first cell is the pin number and
-			the second cell is used to specify the gpio polarity:
-				0 = active high
-				1 = active low
-For more details, please refer generic GPIO DT binding document
-<devicetree/bindings/gpio/gpio.txt>.
-
-Example:
---------
-#include <dt-bindings/mfd/max77620.h>
-...
-max77620@3c {
-	compatible = "maxim,max77620";
-
-	gpio-controller;
-	#gpio-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt b/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt
deleted file mode 100644
index f93d51478d5a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-mm-lantiq.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Lantiq SoC External Bus memory mapped GPIO controller
-
-By attaching hardware latches to the EBU it is possible to create output
-only gpios. This driver configures a special memory address, which when
-written to outputs 16 bit to the latches.
-
-The node describing the memory mapped GPIOs needs to be a child of the node
-describing the "lantiq,localbus".
-
-Required properties:
-- compatible : Should be "lantiq,gpio-mm-lantiq"
-- reg : Address and length of the register set for the device
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify optional parameters (currently
-  unused).
-- gpio-controller : Marks the device node as a gpio controller.
-
-Optional properties:
-- lantiq,shadow : The default value that we shall assume as already set on the
-  shift register cascade.
-
-Example:
-
-localbus@0 {
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
-		1 0 0x4000000 0x4000010>; /* addsel1 */
-	compatible = "lantiq,localbus", "simple-bus";
-
-	gpio_mm0: gpio@4000000 {
-		compatible = "lantiq,gpio-mm";
-		reg = <1 0x0 0x10>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		lantiq,shadow = <0x77f>
-	};
-}
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
new file mode 100644
index 000000000000..b4d55bf6a285
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic MMIO GPIO
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+
+description:
+  Some simple GPIO controllers may consist of a single data register or a pair
+  of set/clear-bit registers. Such controllers are common for glue logic in
+  FPGAs or ASICs. Commonly, these controllers are accessed over memory-mapped
+  NAND-style parallel busses.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm6345-gpio
+      - ni,169445-nand-gpio
+      - wd,mbl-gpio # Western Digital MyBook Live memory-mapped GPIO controller
+      - intel,ixp4xx-expansion-bus-mmio-gpio
+
+  big-endian: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  little-endian: true
+
+  reg:
+    minItems: 1
+    description:
+      A list of registers in the controller. The width of each register is
+      determined by its size. All registers must have the same width. The number
+      of GPIOs is set by the width, with bit 0 corresponding to GPIO 0, unless
+      the ngpios property further restricts the number of used lines.
+    items:
+      - description:
+          Register to READ the value of the GPIO lines. If GPIO line is high,
+          the bit will be set. If the GPIO line is low, the bit will be cleared.
+          This register may also be used to drive GPIOs if the SET register is
+          omitted.
+      - description:
+          Register to SET the value of the GPIO lines. Setting a bit in this
+          register will drive the GPIO line high.
+      - description:
+          Register to CLEAR the value of the GPIO lines. Setting a bit in this
+          register will drive the GPIO line low. If this register is omitted,
+          the SET register will be used to clear the GPIO lines as well, by
+          actively writing the line with 0.
+      - description:
+          Register to set the line as OUTPUT. Setting a bit in this register
+          will turn that line into an output line. Conversely, clearing a bit
+          will turn that line into an input.
+      - description:
+          Register to set this line as INPUT. Setting a bit in this register
+          will turn that line into an input line. Conversely, clearing a bit
+          will turn that line into an output.
+
+  reg-names:
+    minItems: 1
+    maxItems: 5
+    items:
+      enum:
+        - dat
+        - set
+        - clr
+        - dirout
+        - dirin
+
+  native-endian: true
+
+  ngpios:
+    minimum: 1
+    maximum: 63
+    description:
+      If this property is present the number of usable GPIO lines are restricted
+      to the first 0 .. ngpios lines. This is useful when the GPIO MMIO register
+      has 32 bits for GPIO but only the first 12 are actually connected to
+      real electronics, and then we set ngpios to 12.
+
+  no-output:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If this property is present, the controller cannot drive the GPIO lines.
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: intel,ixp4xx-expansion-bus-mmio-gpio
+then:
+  $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#gpio-cells'
+  - gpio-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gpio@1f300010 {
+      compatible = "ni,169445-nand-gpio";
+      reg = <0x1f300010 0x4>;
+      reg-names = "dat";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    gpio@e0100000 {
+      compatible = "wd,mbl-gpio";
+      reg-names = "dat";
+      reg = <0xe0100000 0x1>;
+      #gpio-cells = <2>;
+      gpio-controller;
+      no-output;
+    };
+
+    gpio@fffe0406 {
+      compatible = "brcm,bcm6345-gpio";
+      reg-names = "dirout", "dat";
+      reg = <0xfffe0406 2>, <0xfffe040a 2>;
+      ngpios = <15>;
+      native-endian;
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+
+    bus@c4000000 {
+        compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+        reg = <0xc4000000 0x30>;
+        native-endian;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0x0 0x50000000 0x01000000>;
+        dma-ranges = <0 0x0 0x50000000 0x01000000>;
+        gpio@1,0 {
+            compatible = "intel,ixp4xx-expansion-bus-mmio-gpio";
+            gpio-controller;
+            #gpio-cells = <2>;
+            big-endian;
+            reg = <1 0x00000000 0x2>;
+            reg-names = "dat";
+            intel,ixp4xx-eb-write-enable = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt b/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
deleted file mode 100644
index 410759de9f09..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Turris Mox Moxtet GPIO expander via Moxtet bus
-
-Required properties:
- - compatible		: Should be "cznic,moxtet-gpio".
- - gpio-controller	: Marks the device node as a GPIO controller.
- - #gpio-cells		: Should be two. For consumer use see gpio.txt.
-
-Other properties are required for a Moxtet bus device, please refer to
-Documentation/devicetree/bindings/bus/moxtet.txt.
-
-Example:
-
-	moxtet_sfp: gpio@0 {
-		compatible = "cznic,moxtet-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		reg = <0>;
-	}
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
deleted file mode 100644
index cd28e932bf50..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale MPC512x/MPC8xxx/QorIQ/Layerscape GPIO controller
-
-Required properties:
-- compatible : Should be "fsl,<soc>-gpio"
-  The following <soc>s are known to be supported:
-	mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq,
-	ls1021a, ls1043a, ls2080a, ls1028a, ls1088a.
-- reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all 32 pins.
-- #gpio-cells : Should be two.  The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-
-Optional properties:
-- little-endian : GPIO registers are used as little endian. If not
-                  present registers are used as big endian by default.
-
-Example of gpio-controller node for a mpc5125 SoC:
-
-gpio0: gpio@1100 {
-	compatible = "fsl,mpc5125-gpio";
-	#gpio-cells = <2>;
-	reg = <0x1100 0x080>;
-	interrupts = <78 0x8>;
-};
-
-Example of gpio-controller node for a ls2080a SoC:
-
-gpio0: gpio@2300000 {
-	compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
-	reg = <0x0 0x2300000 0x0 0x10000>;
-	interrupts = <0 36 0x4>; /* Level high type */
-	gpio-controller;
-	little-endian;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-
-Example of gpio-controller node for a ls1028a/ls1088a SoC:
-
-gpio1: gpio@2300000 {
-	compatible = "fsl,ls1028a-gpio", "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
-	reg = <0x0 0x2300000 0x0 0x10000>;
-	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	little-endian;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
deleted file mode 100644
index 0fc6700ed800..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-* Marvell EBU GPIO controller
-
-Required properties:
-
-- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio",
-  "marvell,armadaxp-gpio" or "marvell,armada-8k-gpio".
-
-    "marvell,orion-gpio" should be used for Orion, Kirkwood, Dove,
-    Discovery (except MV78200) and Armada 370. "marvell,mv78200-gpio"
-    should be used for the Discovery MV78200.
-
-    "marvel,armadaxp-gpio" should be used for all Armada XP SoCs
-    (MV78230, MV78260, MV78460).
-
-    "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
-    SoCs (either from AP or CP), see
-    Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
-    for specific details about the offset property.
-
-- reg: Address and length of the register set for the device. Only one
-  entry is expected, except for the "marvell,armadaxp-gpio" variant
-  for which two entries are expected: one for the general registers,
-  one for the per-cpu registers. Not used for marvell,armada-8k-gpio.
-
-- interrupts: The list of interrupts that are used for all the pins
-  managed by this GPIO bank. There can be more than one interrupt
-  (example: 1 interrupt per 8 pins on Armada XP, which means 4
-  interrupts per bank of 32 GPIOs).
-
-- interrupt-controller: identifies the node as an interrupt controller
-
-- #interrupt-cells: specifies the number of cells needed to encode an
-  interrupt source. Should be two.
-  The first cell is the GPIO number.
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-- gpio-controller: marks the device node as a gpio controller
-
-- ngpios: number of GPIOs this controller has
-
-- #gpio-cells: Should be two. The first cell is the pin number. The
-  second cell is reserved for flags, unused at the moment.
-
-Optional properties:
-
-In order to use the GPIO lines in PWM mode, some additional optional
-properties are required.
-
-- compatible: Must contain "marvell,armada-370-gpio"
-
-- reg: an additional register set is needed, for the GPIO Blink
-  Counter on/off registers.
-
-- reg-names: Must contain an entry "pwm" corresponding to the
-  additional register range needed for PWM operation.
-
-- #pwm-cells: Should be two. The first cell is the GPIO line number. The
-  second cell is the period in nanoseconds.
-
-- clocks: Must be a phandle to the clock for the GPIO controller.
-
-Example:
-
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
-		};
-
-		gpio1: gpio@18140 {
-			compatible = "marvell,armada-370-gpio";
-			reg = <0x18140 0x40>, <0x181c8 0x08>;
-			reg-names = "gpio", "pwm";
-			ngpios = <17>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			#pwm-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <87>, <88>, <89>;
-			clocks = <&coreclk 0>;
-		};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
new file mode 100644
index 000000000000..7ed5f9c4dde9
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell EBU GPIO controller
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,armada-8k-gpio
+          - marvell,orion-gpio
+
+      - items:
+          - enum:
+              - marvell,mv78200-gpio
+              - marvell,armada-370-gpio
+          - const: marvell,orion-gpio
+
+      - description: Deprecated binding
+        items:
+          - const: marvell,armadaxp-gpio
+          - const: marvell,orion-gpio
+        deprecated: true
+
+  reg:
+    description: |
+      Address and length of the register set for the device. Not used for
+      marvell,armada-8k-gpio.
+
+      A second entry can be provided, for the PWM function using the GPIO Blink
+      Counter on/off registers.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: pwm
+    minItems: 1
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the gpio registers (in bytes)
+
+  interrupts:
+    description: |
+      The list of interrupts that are used for all the pins managed by this
+      GPIO bank. There can be more than one interrupt (example: 1 interrupt
+      per 8 pins on Armada XP, which means 4 interrupts per bank of 32
+      GPIOs).
+    minItems: 1
+    maxItems: 4
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  marvell,pwm-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the pwm registers (in bytes)
+
+  "#pwm-cells":
+    description:
+      The first cell is the GPIO line number. The second cell is the period
+      in nanoseconds.
+    const: 2
+
+  clocks:
+    description:
+      Clock(s) used for PWM function.
+    items:
+      - description: Core clock
+      - description: AXI bus clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: core
+      - const: axi
+    minItems: 1
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - gpio-controller
+  - ngpios
+  - "#gpio-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-8k-gpio
+    then:
+      required:
+        - offset
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gpio@d0018100 {
+      compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
+      reg = <0xd0018100 0x40>, <0xd0018800 0x30>;
+      ngpios = <32>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <16>, <17>, <18>, <19>;
+    };
+
+  - |
+    gpio@18140 {
+      compatible = "marvell,armada-370-gpio", "marvell,orion-gpio";
+      reg = <0x18140 0x40>, <0x181c8 0x08>;
+      reg-names = "gpio", "pwm";
+      ngpios = <17>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      #pwm-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <87>, <88>, <89>;
+      clocks = <&coreclk 0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
index dfa1133f8c5e..fed1b06495ad 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml
@@ -8,7 +8,6 @@ title: Freescale MXS GPIO controller
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
-  - Anson Huang <Anson.Huang@nxp.com>
 
 description: |
   The Freescale MXS GPIO controller is part of MXS PIN controller.
@@ -19,12 +18,17 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - fsl,imx23-pinctrl
-      - fsl,imx28-pinctrl
+    items:
+      - enum:
+          - fsl,imx23-pinctrl
+          - fsl,imx28-pinctrl
+      # Over 10 years old devices, driver use simple-bus to probe child gpio
+      # Devices. Keep it as it to be compatible existed dts files.
+      - const: simple-bus
 
   '#address-cells':
     const: 1
+
   '#size-cells':
     const: 0
 
@@ -32,7 +36,65 @@ properties:
     maxItems: 1
 
 patternProperties:
-  "gpio@[0-9]+$":
+  '^(?!gpio@)[^@]+@[0-9]+$':
+    type: object
+    properties:
+      fsl,pinmux-ids:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: |
+          An integer array.  Each integer in the array specify a pin
+          with given mux function, with bank, pin and mux packed as below.
+
+          [15..12] : bank number
+          [11..4]  : pin number
+          [3..0]   : mux selection
+
+          This integer with mux selection packed is used as an entity by both group
+          and config nodes to identify a pin.  The mux selection in the integer takes
+          effects only on group node, and will get ignored by driver with config node,
+          since config node is only meant to set up pin configurations.
+
+          Valid values for these integers are listed below.
+
+      reg:
+        items:
+          - description: |
+              pin group index. NOTE: it is supposed wrong use reg property
+              here. But it is over 10 years devices. Just keep it as it.
+
+      fsl,drive-strength:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          0: MXS_DRIVE_4mA
+          1: MXS_DRIVE_8mA
+          2: MXS_DRIVE_12mA
+          3: MXS_DRIVE_16mA
+
+      fsl,voltage:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          0: MXS_VOLTAGE_LOW  - 1.8 V
+          1: MXS_VOLTAGE_HIGH - 3.3 V
+
+      fsl,pull-up:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          0: MXS_PULL_DISABLE - Disable the internal pull-up
+          1: MXS_PULL_ENABLE  - Enable the internal pull-up
+
+          Note that when enabling the pull-up, the internal pad keeper gets disabled.
+          Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up
+          will only disable the internal pad keeper.
+
+    required:
+      - fsl,pinmux-ids
+
+    additionalProperties: false
+
+  '^gpio@[0-9]+$':
     type: object
     properties:
       compatible:
@@ -49,10 +111,10 @@ patternProperties:
 
       interrupt-controller: true
 
-      "#interrupt-cells":
+      '#interrupt-cells':
         const: 2
 
-      "#gpio-cells":
+      '#gpio-cells':
         const: 2
 
       gpio-controller: true
@@ -62,8 +124,8 @@ patternProperties:
       - reg
       - interrupts
       - interrupt-controller
-      - "#interrupt-cells"
-      - "#gpio-cells"
+      - '#interrupt-cells'
+      - '#gpio-cells'
       - gpio-controller
 
     additionalProperties: false
@@ -81,56 +143,64 @@ examples:
     pinctrl@80018000 {
         #address-cells = <1>;
         #size-cells = <0>;
-        compatible = "fsl,imx28-pinctrl";
+        compatible = "fsl,imx28-pinctrl", "simple-bus";
         reg = <0x80018000 0x2000>;
 
         gpio@0 {
-                compatible = "fsl,imx28-gpio";
-                reg = <0>;
-                interrupts = <127>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            compatible = "fsl,imx28-gpio";
+            reg = <0>;
+            interrupts = <127>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
 
         gpio@1 {
-                compatible = "fsl,imx28-gpio";
-                reg = <1>;
-                interrupts = <126>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            compatible = "fsl,imx28-gpio";
+            reg = <1>;
+            interrupts = <126>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
 
         gpio@2 {
-                compatible = "fsl,imx28-gpio";
-                reg = <2>;
-                interrupts = <125>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            compatible = "fsl,imx28-gpio";
+            reg = <2>;
+            interrupts = <125>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
 
         gpio@3 {
-                compatible = "fsl,imx28-gpio";
-                reg = <3>;
-                interrupts = <124>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            compatible = "fsl,imx28-gpio";
+            reg = <3>;
+            interrupts = <124>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
 
         gpio@4 {
-                compatible = "fsl,imx28-gpio";
-                reg = <4>;
-                interrupts = <123>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            compatible = "fsl,imx28-gpio";
+            reg = <4>;
+            interrupts = <123>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+
+        lcdif-apx4@5 {
+            reg = <5>;
+            fsl,pinmux-ids = <0x1181 0x1191>;
+            fsl,drive-strength = <0>;
+            fsl,voltage = <0>;
+            fsl,pull-up = <0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
deleted file mode 100644
index 8315ac7780ef..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Nomadik GPIO controller
-
-Required properties:
-- compatible            : Should be "st,nomadik-gpio".
-- reg                   : Physical base address and length of the controller's registers.
-- interrupts            : The interrupt outputs from the controller.
-- #gpio-cells           : Should be two:
-                            The first cell is the pin number.
-                            The second cell is used to specify optional parameters:
-                              - bits[3:0] trigger type and level flags:
-                                  1 = low-to-high edge triggered.
-                                  2 = high-to-low edge triggered.
-                                  4 = active high level-sensitive.
-                                  8 = active low level-sensitive.
-- gpio-controller       : Marks the device node as a GPIO controller.
-- interrupt-controller  : Marks the device node as an interrupt controller.
-- gpio-bank             : Specifies which bank a controller owns.
-- st,supports-sleepmode : Specifies whether controller can sleep or not
-
-Example:
-
-                gpio1: gpio@8012e080 {
-                        compatible = "st,nomadik-gpio";
-                        reg =  <0x8012e080 0x80>;
-                        interrupts = <0 120 0x4>;
-                        #gpio-cells = <2>;
-                        gpio-controller;
-                        interrupt-controller;
-                        st,supports-sleepmode;
-                        gpio-bank = <1>;
-                };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt b/Documentation/devicetree/bindings/gpio/gpio-palmas.txt
deleted file mode 100644
index 08b5b52a3ae0..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-palmas.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Palmas GPIO controller bindings
-
-Required properties:
-- compatible:
-  - "ti,palams-gpio" for palma series of the GPIO controller
-  - "ti,tps80036-gpio" for Palma series device TPS80036.
-  - "ti,tps65913-gpio" for palma series device TPS65913.
-  - "ti,tps65914-gpio" for palma series device TPS65914.
-- #gpio-cells : Should be two.
-  - first cell is the gpio pin number
-  - second cell is used to specify the gpio polarity:
-      0 = active high
-      1 = active low
-- gpio-controller : Marks the device node as a GPIO controller.
-
-Note: This gpio node will be sub node of palmas node.
-
-Example:
-	palmas: tps65913@58 {
-		:::::::::::
-		palmas_gpio: palmas_gpio {
-			compatible = "ti,palmas-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-		:::::::::::
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
deleted file mode 100644
index 338c5312a106..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
+++ /dev/null
@@ -1,47 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/gpio-pca9570.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: PCA9570 I2C GPO expander
-
-maintainers:
-  - Sungbo Eo <mans0n@gorani.run>
-
-properties:
-  compatible:
-    enum:
-      - nxp,pca9570
-
-  reg:
-    maxItems: 1
-
-  gpio-controller: true
-
-  '#gpio-cells':
-    const: 2
-
-required:
-  - compatible
-  - reg
-  - gpio-controller
-  - "#gpio-cells"
-
-additionalProperties: false
-
-examples:
-  - |
-    i2c0 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        gpio@24 {
-            compatible = "nxp,pca9570";
-            reg = <0x24>;
-            gpio-controller;
-            #gpio-cells = <2>;
-        };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
index b6a6e742b66d..12134c737ad8 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -15,51 +15,65 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - exar,xra1202
-      - maxim,max7310
-      - maxim,max7312
-      - maxim,max7313
-      - maxim,max7315
-      - maxim,max7319
-      - maxim,max7320
-      - maxim,max7321
-      - maxim,max7322
-      - maxim,max7323
-      - maxim,max7324
-      - maxim,max7325
-      - maxim,max7326
-      - maxim,max7327
-      - nxp,pca6416
-      - nxp,pca9505
-      - nxp,pca9506
-      - nxp,pca9534
-      - nxp,pca9535
-      - nxp,pca9536
-      - nxp,pca9537
-      - nxp,pca9538
-      - nxp,pca9539
-      - nxp,pca9554
-      - nxp,pca9555
-      - nxp,pca9556
-      - nxp,pca9557
-      - nxp,pca9574
-      - nxp,pca9575
-      - nxp,pca9698
-      - nxp,pcal6416
-      - nxp,pcal6524
-      - nxp,pcal9535
-      - nxp,pcal9554b
-      - nxp,pcal9555a
-      - onnn,cat9554
-      - onnn,pca9654
-      - ti,pca6107
-      - ti,pca9536
-      - ti,tca6408
-      - ti,tca6416
-      - ti,tca6424
-      - ti,tca9539
-      - ti,tca9554
+    oneOf:
+      - items:
+          - const: toradex,ecgpiol16
+          - const: nxp,pcal6416
+      - items:
+          - const: diodes,pi4ioe5v6534q
+          - const: nxp,pcal6534
+      - items:
+          - enum:
+              - exar,xra1202
+              - maxim,max7310
+              - maxim,max7312
+              - maxim,max7313
+              - maxim,max7315
+              - maxim,max7319
+              - maxim,max7320
+              - maxim,max7321
+              - maxim,max7322
+              - maxim,max7323
+              - maxim,max7324
+              - maxim,max7325
+              - maxim,max7326
+              - maxim,max7327
+              - nxp,pca6408
+              - nxp,pca6416
+              - nxp,pca9505
+              - nxp,pca9506
+              - nxp,pca9534
+              - nxp,pca9535
+              - nxp,pca9536
+              - nxp,pca9537
+              - nxp,pca9538
+              - nxp,pca9539
+              - nxp,pca9554
+              - nxp,pca9555
+              - nxp,pca9556
+              - nxp,pca9557
+              - nxp,pca9574
+              - nxp,pca9575
+              - nxp,pca9698
+              - nxp,pcal6408
+              - nxp,pcal6416
+              - nxp,pcal6524
+              - nxp,pcal6534
+              - nxp,pcal9535
+              - nxp,pcal9554b
+              - nxp,pcal9555a
+              - onnn,cat9554
+              - onnn,pca9654
+              - ti,pca6107
+              - ti,pca9536
+              - ti,tca6408
+              - ti,tca6416
+              - ti,tca6418
+              - ti,tca6424
+              - ti,tca9535
+              - ti,tca9538
+              - ti,tca9539
+              - ti,tca9554
 
   reg:
     maxItems: 1
@@ -97,19 +111,8 @@ properties:
 patternProperties:
   "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
     type: object
-    properties:
-      gpio-hog: true
-      gpios: true
-      input: true
-      output-high: true
-      output-low: true
-      line-name: true
-
     required:
       - gpio-hog
-      - gpios
-
-    additionalProperties: false
 
 required:
   - compatible
@@ -133,6 +136,7 @@ allOf:
               - maxim,max7325
               - maxim,max7326
               - maxim,max7327
+              - toradex,ecgpiol16
     then:
       properties:
         reset-gpios: false
@@ -143,7 +147,7 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -169,7 +173,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c1 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -190,20 +194,12 @@ examples:
                               "chg-status+red", "green", "blue", "en-esata",
                               "fault1", "p26", "p27";
         };
-
-        ts3a227@3b {
-            compatible = "ti,ts3a227e";
-            reg = <0x3b>;
-            interrupt-parent = <&gpio99>;
-            interrupts = <14 IRQ_TYPE_EDGE_RISING>;
-            ti,micbias = <0>; /* 2.1V */
-        };
     };
 
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c2 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -221,7 +217,7 @@ examples:
     };
 
   - |
-    i2c3 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
deleted file mode 100644
index 414a01cdf715..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Generic Parallel-in/Serial-out Shift Register GPIO Driver
-
-This binding describes generic parallel-in/serial-out shift register
-devices that can be used for GPI (General Purpose Input). This includes
-SN74165 serial-out shift registers and the SN65HVS88x series of
-industrial serializers.
-
-Required properties:
- - compatible		: Should be "pisosr-gpio".
- - gpio-controller	: Marks the device node as a GPIO controller.
- - #gpio-cells		: Should be two. For consumer use see gpio.txt.
-
-Optional properties:
- - ngpios		: Number of used GPIO lines (0..n-1), default is 8.
- - load-gpios		: GPIO pin specifier attached to load enable, this
-			  pin is pulsed before reading from the device to
-			  load input pin values into the the device.
-
-For other required and optional properties of SPI slave
-nodes please refer to ../spi/spi-bus.txt.
-
-Example:
-
-	gpio@0 {
-		compatible = "ti,sn65hvs882", "pisosr-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
-
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		spi-cpol;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
deleted file mode 100644
index 5375625e8cd2..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Samsung Exynos4 GPIO Controller
-
-Required properties:
-- compatible: Compatible property value should be "samsung,exynos4-gpio>".
-
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-
-- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
-  should be the following with values derived from the SoC user manual.
-     <[phandle of the gpio controller node]
-      [pin number within the gpio controller]
-      [mux function]
-      [flags and pull up/down]
-      [drive strength]>
-
-  Values for gpio specifier:
-  - Pin number: is a value between 0 to 7.
-  - Flags and Pull Up/Down: 0 - Pull Up/Down Disabled.
-                            1 - Pull Down Enabled.
-                            3 - Pull Up Enabled.
-          Bit 16 (0x00010000) - Input is active low.
-  - Drive Strength: 0 - 1x,
-                    1 - 3x,
-                    2 - 2x,
-                    3 - 4x
-
-- gpio-controller: Specifies that the node is a gpio controller.
-- #address-cells: should be 1.
-- #size-cells: should be 1.
-
-Example:
-
-	gpa0: gpio-controller@11400000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "samsung,exynos4-gpio";
-		reg = <0x11400000 0x20>;
-		#gpio-cells = <4>;
-		gpio-controller;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-sprd.txt b/Documentation/devicetree/bindings/gpio/gpio-sprd.txt
deleted file mode 100644
index eca97d45388f..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-sprd.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Spreadtrum GPIO controller bindings
-
-The controller's registers are organized as sets of sixteen 16-bit
-registers with each set controlling a bank of up to 16 pins. A single
-interrupt is shared for all of the banks handled by the controller.
-
-Required properties:
-- compatible: Should be "sprd,sc9860-gpio".
-- reg: Define the base and range of the I/O address space containing
-the GPIO controller registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the gpio number and
-the second cell is used to specify optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be <2>. Specifies the number of cells needed
-to encode interrupt source.
-- interrupts: Should be the port interrupt shared by all the gpios.
-
-Example:
-	ap_gpio: gpio@40280000 {
-		compatible = "sprd,sc9860-gpio";
-		reg = <0 0x40280000 0 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
deleted file mode 100644
index a0e4cf885213..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-STMPE gpio
-----------
-
-Required properties:
- - compatible: "st,stmpe-gpio"
-
-Optional properties:
- - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
-   due to different usage (e.g. touch, keypad)
-
-Node name must be stmpe_gpio and should be child node of stmpe node to which it
-belongs.
-
-Example:
-	stmpe_gpio {
-		compatible = "st,stmpe-gpio";
-		st,norequest-mask = <0x20>;	//gpio 5 can't be used
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
deleted file mode 100644
index 1afc2de7a537..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-TPIC2810 GPIO controller bindings
-
-Required properties:
- - compatible		: Should be "ti,tpic2810".
- - reg			: The I2C address of the device
- - gpio-controller	: Marks the device node as a GPIO controller.
- - #gpio-cells		: Should be two. For consumer use see gpio.txt.
-
-Example:
-
-	gpio@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt b/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt
deleted file mode 100644
index 92ea9c8f6399..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-ts4800.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* TS-4800 FPGA's GPIO controller bindings
-
-Required properties:
-- compatible: Must be "technologic,ts4800-gpio".
-- #gpio-cells: Should be two. The first cell is the pin number.
-- reg: Physical base address of the controller and length
-       of memory mapped region.
-
-Optional property:
-- ngpios: See "gpio.txt"
-
-Example:
-
-gpio1: gpio {
-	compatible = "technologic,ts4800-gpio";
-	reg = <0x10020 0x6>;
-	ngpios = <8>;
-	gpio-controller;
-	#gpio-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt b/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt
deleted file mode 100644
index 3f8e71b1ab2a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-ts4900.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Technologic Systems I2C-FPGA's GPIO controller bindings
-
-This bindings describes the GPIO controller for Technologic's FPGA core.
-TS-4900's FPGA encodes the GPIO state on 3 bits, whereas the TS-7970's FPGA
-uses 2 bits: it doesn't use a dedicated input bit.
-
-Required properties:
-- compatible: Should be one of the following
-		"technologic,ts4900-gpio"
-		"technologic,ts7970-gpio"
-- reg: Physical base address of the controller and length
-       of memory mapped region.
-- #gpio-cells: Should be two. The first cell is the pin number.
-- gpio-controller: Marks the device node as a gpio controller.
-
-Optional property:
-- ngpios: Number of GPIOs this controller is instantiated with,
-  the default is 32. See gpio.txt for more details.
-
-Example:
-
-&i2c2 {
-	gpio8: gpio@28 {
-		compatible = "technologic,ts4900-gpio";
-		reg = <0x28>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		ngpios = <32>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
deleted file mode 100644
index 66788fda1db3..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-twl4030 GPIO controller bindings
-
-Required properties:
-- compatible:
-  - "ti,twl4030-gpio" for twl4030 GPIO controller
-- #gpio-cells : Should be two.
-  - first cell is the pin number
-  - second cell is used to specify optional parameters (unused)
-- gpio-controller : Marks the device node as a GPIO controller.
-- #interrupt-cells : Should be 2.
-- interrupt-controller: Mark the device node as an interrupt controller
-  The first cell is the GPIO number.
-  The second cell is not used.
-- ti,use-leds : Enables LEDA and LEDB outputs if set
-- ti,debounce : if n-th bit is set, debounces GPIO-n
-- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1)
-- ti,pullups : if n-th bit is set, set a pullup on GPIO-n
-- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n
-
-Example:
-
-twl_gpio: gpio {
-    compatible = "ti,twl4030-gpio";
-    #gpio-cells = <2>;
-    gpio-controller;
-    #interrupt-cells = <2>;
-    interrupt-controller;
-    ti,use-leds;
-};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
index 19738a457a58..a31f64b6d40b 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -20,18 +20,27 @@ description: |
 properties:
   compatible:
     oneOf:
+      - const: fsl,imx8ulp-gpio
       - const: fsl,vf610-gpio
       - items:
           - const: fsl,imx7ulp-gpio
           - const: fsl,vf610-gpio
+      - items:
+          - enum:
+              - fsl,imx93-gpio
+              - fsl,imx94-gpio
+              - fsl,imx95-gpio
+          - const: fsl,imx8ulp-gpio
 
   reg:
-    description: The first reg tuple represents the PORT module, the second tuple
-      represents the GPIO module.
+    minItems: 1
     maxItems: 2
 
   interrupts:
-    maxItems: 1
+    items:
+      - description: GPIO Trustzone non-secure interrupt number
+      - description: GPIO Trustzone secure interrupt number
+    minItems: 1
 
   interrupt-controller: true
 
@@ -43,6 +52,10 @@ properties:
 
   gpio-controller: true
 
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
   clocks:
     items:
       - description: SoC GPIO clock
@@ -54,7 +67,22 @@ properties:
       - const: port
 
   gpio-ranges:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
+
+  gpio-reserved-ranges: true
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+    default: 32
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
 
 required:
   - compatible
@@ -65,6 +93,30 @@ required:
   - "#gpio-cells"
   - gpio-controller
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,vf610-gpio
+              - fsl,imx7ulp-gpio
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        reg:
+          items:
+            - description: PORT register base address
+            - description: GPIO register base address
+    else:
+      properties:
+        interrupts:
+          minItems: 2
+        reg:
+          items:
+            - description: GPIO register base address
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
deleted file mode 100644
index e90fb987e25f..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xgene-sb.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-APM X-Gene Standby GPIO controller bindings
-
-This is a gpio controller in the standby domain. It also supports interrupt in
-some particular pins which are sourced to its parent interrupt controller
-as diagram below:
-                            +-----------------+
-                            | X-Gene standby  |
-                            | GPIO controller +------ GPIO_0
-+------------+              |                 | ...
-| Parent IRQ | EXT_INT_0    |                 +------ GPIO_8/EXT_INT_0
-| controller | (SPI40)      |                 | ...
-| (GICv2)    +--------------+                 +------ GPIO_[N+8]/EXT_INT_N
-|            |   ...        |                 |
-|            | EXT_INT_N    |                 +------ GPIO_[N+9]
-|            | (SPI[40 + N])|                 | ...
-|            +--------------+                 +------ GPIO_MAX
-+------------+              +-----------------+
-
-Required properties:
-- compatible: "apm,xgene-gpio-sb" for the X-Gene Standby GPIO controller
-- reg: Physical base address and size of the controller's registers
-- #gpio-cells: Should be two.
-	- first cell is the pin number
-	- second cell is used to specify the gpio polarity:
-		0 = active high
-		1 = active low
-- gpio-controller: Marks the device node as a GPIO controller.
-- interrupts: The EXT_INT_0 parent interrupt resource must be listed first.
-- interrupt-cells: Should be two.
-       - first cell is 0-N coresponding for EXT_INT_0 to EXT_INT_N.
-       - second cell is used to specify flags.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- apm,nr-gpios: Optional, specify number of gpios pin.
-- apm,nr-irqs: Optional, specify number of interrupt pins.
-- apm,irq-start: Optional, specify lowest gpio pin support interrupt.
-
-Example:
-	sbgpio: gpio@17001000{
-		compatible = "apm,xgene-gpio-sb";
-		reg = <0x0 0x17001000 0x0 0x400>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		interrupts = 	<0x0 0x28 0x1>,
-				<0x0 0x29 0x1>,
-				<0x0 0x2a 0x1>,
-				<0x0 0x2b 0x1>,
-				<0x0 0x2c 0x1>,
-				<0x0 0x2d 0x1>;
-		interrupt-parent = <&gic>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		apm,nr-gpios = <22>;
-		apm,nr-irqs = <6>;
-		apm,irq-start = <8>;
-	};
-
-	testuser {
-		compatible = "example,testuser";
-		/* Use the GPIO_13/EXT_INT_5 line as an active high triggered
-		 * level interrupt
-		 */
-		interrupts = <5 4>;
-		interrupt-parent = <&sbgpio>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xgene.txt b/Documentation/devicetree/bindings/gpio/gpio-xgene.txt
deleted file mode 100644
index 86dbb05e7758..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xgene.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-APM X-Gene SoC GPIO controller bindings
-
-This is a gpio controller that is part of the flash controller.
-This gpio controller controls a total of 48 gpios.
-
-Required properties:
-- compatible: "apm,xgene-gpio" for X-Gene GPIO controller
-- reg: Physical base address and size of the controller's registers
-- #gpio-cells: Should be two.
-	- first cell is the pin number
-	- second cell is used to specify the gpio polarity:
-		0 = active high
-		1 = active low
-- gpio-controller: Marks the device node as a GPIO controller.
-
-Example:
-	gpio0: gpio0@1701c000 {
-		compatible = "apm,xgene-gpio";
-		reg = <0x0 0x1701c000 0x0 0x40>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt b/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
deleted file mode 100644
index e506f30e1a95..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Xilinx plb/axi GPIO controller
-
-Dual channel GPIO controller with configurable number of pins
-(from 1 to 32 per channel). Every pin can be configured as
-input/output/tristate. Both channels share the same global IRQ but
-local interrupts can be enabled on channel basis.
-
-Required properties:
-- compatible : Should be "xlnx,xps-gpio-1.00.a"
-- reg : Address and length of the register set for the device
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
-- gpio-controller : Marks the device node as a GPIO controller.
-
-Optional properties:
-- clocks : Input clock specifier. Refer to common clock bindings.
-- interrupts : Interrupt mapping for GPIO IRQ.
-- xlnx,all-inputs : if n-th bit is setup, GPIO-n is input
-- xlnx,dout-default : if n-th bit is 1, GPIO-n default value is 1
-- xlnx,gpio-width : gpio width
-- xlnx,tri-default : if n-th bit is 1, GPIO-n is in tristate mode
-- xlnx,is-dual : if 1, controller also uses the second channel
-- xlnx,all-inputs-2 : as above but for the second channel
-- xlnx,dout-default-2 : as above but the second channel
-- xlnx,gpio2-width : as above but for the second channel
-- xlnx,tri-default-2 : as above but for the second channel
-
-
-Example:
-gpio: gpio@40000000 {
-	#gpio-cells = <2>;
-	compatible = "xlnx,xps-gpio-1.00.a";
-	clocks = <&clkc25>;
-	gpio-controller ;
-	interrupt-parent = <&microblaze_0_intc>;
-	interrupts = < 6 2 >;
-	reg = < 0x40000000 0x10000 >;
-	xlnx,all-inputs = <0x0>;
-	xlnx,all-inputs-2 = <0x0>;
-	xlnx,dout-default = <0x0>;
-	xlnx,dout-default-2 = <0x0>;
-	xlnx,gpio-width = <0x2>;
-	xlnx,gpio2-width = <0x2>;
-	xlnx,interrupt-present = <0x1>;
-	xlnx,is-dual = <0x1>;
-	xlnx,tri-default = <0xffffffff>;
-	xlnx,tri-default-2 = <0xffffffff>;
-} ;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt b/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt
deleted file mode 100644
index e13cc399b363..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xra1403.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-GPIO Driver for XRA1403 16-BIT GPIO Expander With Reset Input from EXAR
-
-The XRA1403 is an 16-bit GPIO expander with an SPI interface. Features available:
-	- Individually programmable inputs:
-		- Internal pull-up resistors
-		- Polarity inversion
-		- Individual interrupt enable
-		- Rising edge and/or Falling edge interrupt
-		- Input filter
-	- Individually programmable outputs
-		- Output Level Control
-		- Output Three-State Control
-
-Properties
-----------
-Check documentation for SPI and GPIO controllers regarding properties needed to configure the node.
-
-	- compatible = "exar,xra1403".
-	- reg - SPI id of the device.
-	- gpio-controller - marks the node as gpio.
-	- #gpio-cells - should be two where the first cell is the pin number
-		and the second one is used for optional parameters.
-
-Optional properties:
--------------------
-	- reset-gpios: in case available used to control the device reset line.
-	- interrupt-controller - marks the node as interrupt controller.
-	- #interrupt-cells - should be two and represents the number of cells
-		needed to encode interrupt source.
-
-Example
---------
-
-	gpioxra0: gpio@2 {
-		compatible = "exar,xra1403";
-		reg = <2>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-		spi-max-frequency = <1000000>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zevio.txt b/Documentation/devicetree/bindings/gpio/gpio-zevio.txt
deleted file mode 100644
index a37bd9ae2730..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-zevio.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Zevio GPIO controller
-
-Required properties:
-- compatible: Should be "lsi,zevio-gpio"
-- reg: Address and length of the register set for the device
-- #gpio-cells: Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
-- gpio-controller: Marks the device node as a GPIO controller.
-
-Example:
-	gpio: gpio@90000000 {
-		compatible = "lsi,zevio-gpio";
-		reg = <0x90000000 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
index 378da2649e66..5e2496379a3c 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -4,14 +4,18 @@
 $id: http://devicetree.org/schemas/gpio/gpio-zynq.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq GPIO controller Device Tree Bindings
+title: Xilinx Zynq GPIO controller
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 properties:
   compatible:
-    const: xlnx,zynq-gpio-1.0
+    enum:
+      - xlnx,zynq-gpio-1.0
+      - xlnx,zynqmp-gpio-1.0
+      - xlnx,versal-gpio-1.0
+      - xlnx,pmc-gpio-1.0
 
   reg:
     maxItems: 1
@@ -24,6 +28,11 @@ properties:
 
   gpio-controller: true
 
+  gpio-line-names:
+    description: strings describing the names of each gpio line
+    minItems: 58
+    maxItems: 174
+
   interrupt-controller: true
 
   "#interrupt-cells":
@@ -32,6 +41,54 @@ properties:
   clocks:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,zynqmp-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 174
+          maxItems: 174
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,zynq-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 118
+          maxItems: 118
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,versal-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 58
+          maxItems: 58
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,pmc-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 116
+          maxItems: 116
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index a8895d339bfe..b37dbb1edc62 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -35,8 +35,8 @@ and bit-banged data signals:
 		     <&gpio1 15 0>;
 
 In the above example, &gpio1 uses 2 cells to specify a gpio. The first cell is
-a local offset to the GPIO line and the second cell represent consumer flags,
-such as if the consumer desire the line to be active low (inverted) or open
+a local offset to the GPIO line and the second cell represents consumer flags,
+such as if the consumer desires the line to be active low (inverted) or open
 drain. This is the recommended practice.
 
 The exact meaning of each specifier cell is controller specific, and must be
@@ -59,7 +59,7 @@ GPIO pin number, and GPIO flags as accepted by the "qe_pio_e" gpio-controller.
 Optional standard bitfield specifiers for the last cell:
 
 - Bit 0: 0 means active high, 1 means active low
-- Bit 1: 0 mean push-pull wiring, see:
+- Bit 1: 0 means push-pull wiring, see:
            https://en.wikipedia.org/wiki/Push-pull_output
          1 means single-ended wiring, see:
            https://en.wikipedia.org/wiki/Single-ended_triode
@@ -154,18 +154,35 @@ of the GPIOs that can't be used.
 
 Optionally, a GPIO controller may have a "gpio-line-names" property. This is
 an array of strings defining the names of the GPIO lines going out of the
-GPIO controller. This name should be the most meaningful producer name
-for the system, such as a rail name indicating the usage. Package names
-such as pin name are discouraged: such lines have opaque names (since they
-are by definition generic purpose) and such names are usually not very
-helpful. For example "MMC-CD", "Red LED Vdd" and "ethernet reset" are
-reasonable line names as they describe what the line is used for. "GPIO0"
-is not a good name to give to a GPIO line. Placeholders are discouraged:
-rather use the "" (blank string) if the use of the GPIO line is undefined
-in your design. The names are assigned starting from line offset 0 from
-left to right from the passed array. An incomplete array (where the number
-of passed named are less than ngpios) will still be used up until the last
-provided valid line index.
+GPIO controller.
+
+For lines which are routed to on-board devices, this name should be
+the most meaningful producer name for the system, such as a rail name
+indicating the usage. Package names, such as a pin name, are discouraged:
+such lines have opaque names (since they are by definition general-purpose)
+and such names are usually not very helpful. For example "MMC-CD", "Red LED
+Vdd" and "ethernet reset" are reasonable line names as they describe what
+the line is used for. "GPIO0" is not a good name to give to a GPIO line
+that is hard-wired to a specific device.
+
+However, in the case of lines that are routed to a general purpose header
+(e.g. the Raspberry Pi 40-pin header), and therefore are not hard-wired to
+specific devices, using a pin number or the names on the header is fine
+provided these are real (preferably unique) names. Using an SoC's pad name
+or package name, or names made up from kernel-internal software constructs,
+are strongly discouraged. For example "pin8 [gpio14/uart0_txd]" is fine
+if the board's documentation labels pin 8 as such. However "PortB_24" (an
+example of a name from an SoC's reference manual) would not be desirable.
+
+In either case placeholders are discouraged: rather use the "" (blank
+string) if the use of the GPIO line is undefined in your design. Ideally,
+try to add comments to the dts file describing the naming convention
+you have chosen, and specifying from where the names are derived.
+
+The names are assigned starting from line offset 0, from left to right,
+from the passed array. An incomplete array (where the number of passed
+names is less than ngpios) will be used up until the last provided valid
+line index.
 
 Example:
 
@@ -213,7 +230,7 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		line_b {
+		line_b-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			output-low;
@@ -287,7 +304,7 @@ pins 50..69.
 It is also possible to use pin groups for gpio ranges when pin groups are the
 easiest and most convenient mapping.
 
-Both both <pinctrl-base> and <count> must set to 0 when using named pin groups
+Both <pinctrl-base> and <count> must be set to 0 when using named pin groups
 names.
 
 The property gpio-ranges-group-names must contain exactly one string for each
@@ -296,7 +313,7 @@ range.
 Elements of gpio-ranges-group-names must contain the name of a pin group
 defined in the respective pin controller. The number of pins/GPIO lines in the
 range is the number of pins in that pin group. The number of pins of that
-group is defined int the implementation and not in the device tree.
+group is defined in the implementation and not in the device tree.
 
 If numerical and named pin groups are mixed, the string corresponding to a
 numerical pin range in gpio-ranges-group-names must be empty.
diff --git a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt b/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
deleted file mode 100644
index 29416f9c3220..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio_atmel.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Atmel GPIO controller (PIO)
-
-Required properties:
-- compatible: "atmel,<chip>-gpio", where <chip> is at91rm9200 or at91sam9x5.
-- reg: Should contain GPIO controller registers location and length
-- interrupts: Should be the port interrupt shared by all the pins.
-- #gpio-cells: Should be two.  The first cell is the pin number and
-  the second cell is used to specify optional parameters to declare if the GPIO
-  is active high or low. See gpio.txt.
-- gpio-controller: Marks the device node as a GPIO controller.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two. The first cell is the pin number and the
-  second cell is used to specify irq type flags, see the two cell description
-  in interrupt-controller/interrupts.txt for details.
-
-optional properties:
-- #gpio-lines: Number of gpio if absent 32.
-
-
-Example:
-	pioA: gpio@fffff200 {
-		compatible = "atmel,at91rm9200-gpio";
-		reg = <0xfffff200 0x100>;
-		interrupts = <2 4>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		#gpio-lines = <19>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
diff --git a/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt b/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt
deleted file mode 100644
index 49819367a011..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio_lpc32xx.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-NXP LPC32xx SoC GPIO controller
-
-Required properties:
-- compatible: must be "nxp,lpc3220-gpio"
-- reg: Physical base address and length of the controller's registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be 3:
-   1) bank:
-      0: GPIO P0
-      1: GPIO P1
-      2: GPIO P2
-      3: GPIO P3
-      4: GPI P3
-      5: GPO P3
-   2) pin number
-   3) optional parameters:
-      - bit 0 specifies polarity (0 for normal, 1 for inverted)
-- reg: Index of the GPIO group
-
-Example:
-
-	gpio: gpio@40028000 {
-		compatible = "nxp,lpc3220-gpio";
-		reg = <0x40028000 0x1000>;
-		gpio-controller;
-		#gpio-cells = <3>; /* bank, pin, flags */
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led0 {
-			gpios = <&gpio 5 1 1>; /* GPO_P3 1, active low */
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led1 {
-			gpios = <&gpio 5 14 1>; /* GPO_P3 14, active low */
-			linux,default-trigger = "timer";
-			default-state = "off";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt b/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
deleted file mode 100644
index 966514744df4..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio_oxnas.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* Oxford Semiconductor OXNAS SoC GPIO Controller
-
-Please refer to gpio.txt for generic information regarding GPIO bindings.
-
-Required properties:
- - compatible: "oxsemi,ox810se-gpio" or "oxsemi,ox820-gpio"
- - reg: Base address and length for the device.
- - interrupts: The port interrupt shared by all pins.
- - gpio-controller: Marks the port as GPIO controller.
- - #gpio-cells: Two. The first cell is the pin number and
-   the second cell is used to specify the gpio polarity as defined in
-   defined in <dt-bindings/gpio/gpio.h>:
-      0 = GPIO_ACTIVE_HIGH
-      1 = GPIO_ACTIVE_LOW
- - interrupt-controller: Marks the device node as an interrupt controller.
- - #interrupt-cells: Two. The first cell is the GPIO number and second cell
-   is used to specify the trigger type as defined in
-   <dt-bindings/interrupt-controller/irq.h>:
-      IRQ_TYPE_EDGE_RISING
-      IRQ_TYPE_EDGE_FALLING
-      IRQ_TYPE_EDGE_BOTH
- - gpio-ranges: Interaction with the PINCTRL subsystem, it also specifies the
-   gpio base and count, should be in the format of numeric-gpio-range as
-   specified in the gpio.txt file.
-
-Example:
-
-gpio0: gpio@0 {
-	compatible = "oxsemi,ox810se-gpio";
-	reg = <0x000000 0x100000>;
-	interrupts = <21>;
-	#gpio-cells = <2>;
-	gpio-controller;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	gpio-ranges = <&pinctrl 0 0 32>;
-};
-
-keys {
-	...
-
-	button-esc {
-		label = "ESC";
-		linux,code = <1>;
-		gpios = <&gpio0 12 0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml b/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
new file mode 100644
index 000000000000..735d97d645a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/hisilicon,ascend910-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon common GPIO controller
+
+maintainers:
+  - Jay Fang <f.fangjian@huawei.com>
+
+description:
+  The HiSilicon common GPIO controller can be used for many different
+  types of SoC such as Huawei Ascend AI series chips.
+
+properties:
+  compatible:
+    const: hisilicon,ascend910-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-controller
+  - "#gpio-cells"
+  - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio@840d0000 {
+      compatible = "hisilicon,ascend910-gpio";
+      reg = <0x840d0000 0x1000>;
+      ngpios = <32>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt
deleted file mode 100644
index d58b3958f3ea..000000000000
--- a/Documentation/devicetree/bindings/gpio/ibm,ppc4xx-gpio.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* IBM/AMCC/APM GPIO Controller for PowerPC 4XX series and compatible SoCs
-
-All GPIOs are pin-shared with other functions. DCRs control whether a
-particular pin that has GPIO capabilities acts as a GPIO or is used for
-another purpose. GPIO outputs are separately programmable to emulate
-an open-drain driver.
-
-Required properties:
-	- compatible: must be "ibm,ppc4xx-gpio"
-	- reg: address and length of the register set for the device
-	- #gpio-cells: must be set to 2. The first cell is the pin number
-		and the second cell is used to specify the gpio polarity:
-		0 = active high
-		1 = active low
-	- gpio-controller: marks the device node as a gpio controller.
-
-Example:
-
-GPIO0: gpio@ef600b00 {
-	compatible = "ibm,ppc4xx-gpio";
-	reg = <0xef600b00 0x00000048>;
-	#gpio-cells = <2>;
-	gpio-controller;
-};
diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
deleted file mode 100644
index 8dc41ed99685..000000000000
--- a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Intel IXP4xx XScale Networking Processors GPIO
-
-This GPIO controller is found in the Intel IXP4xx processors.
-It supports 16 GPIO lines.
-
-The interrupt portions of the GPIO controller is hierarchical:
-the synchronous edge detector is part of the GPIO block, but the
-actual enabling/disabling of the interrupt line is done in the
-main IXP4xx interrupt controller which has a 1:1 mapping for
-the first 12 GPIO lines to 12 system interrupts.
-
-The remaining 4 GPIO lines can not be used for receiving
-interrupts.
-
-The interrupt parent of this GPIO controller must be the
-IXP4xx interrupt controller.
-
-Required properties:
-
-- compatible : Should be
-  "intel,ixp4xx-gpio"
-- reg : Should contain registers location and length
-- gpio-controller : marks this as a GPIO controller
-- #gpio-cells : Should be 2, see gpio/gpio.txt
-- interrupt-controller : marks this as an interrupt controller
-- #interrupt-cells : a standard two-cell interrupt, see
-  interrupt-controller/interrupts.txt
-
-Example:
-
-gpio0: gpio@c8004000 {
-	compatible = "intel,ixp4xx-gpio";
-	reg = <0xc8004000 0x1000>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml
new file mode 100644
index 000000000000..bfcb1f364c3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/intel,ixp4xx-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx XScale Networking Processors GPIO Controller
+
+description: |
+  This GPIO controller is found in the Intel IXP4xx
+  processors. It supports 16 GPIO lines.
+  The interrupt portions of the GPIO controller is hierarchical.
+  The synchronous edge detector is part of the GPIO block, but the
+  actual enabling/disabling of the interrupt line is done in the
+  main IXP4xx interrupt controller which has a 1-to-1 mapping for
+  the first 12 GPIO lines to 12 system interrupts.
+  The remaining 4 GPIO lines can not be used for receiving
+  interrupts.
+  The interrupt parent of this GPIO controller must be the
+  IXP4xx interrupt controller.
+  GPIO 14 and 15 can be used as clock outputs rather than GPIO,
+  and this can be enabled by a special flag.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: intel,ixp4xx-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  intel,ixp4xx-gpio14-clkout:
+    description: If defined, enables clock output on GPIO 14
+      instead of GPIO.
+    type: boolean
+
+  intel,ixp4xx-gpio15-clkout:
+    description: If defined, enables clock output on GPIO 15
+      instead of GPIO.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio@c8004000 {
+        compatible = "intel,ixp4xx-gpio";
+        reg = <0xc8004000 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
index b032471831e7..02663d67eac7 100644
--- a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: |
   This module is part of the sl28cpld multi-function device. For more
-  details see ../mfd/kontron,sl28cpld.yaml.
+  details see ../embedded-controller/kontron,sl28cpld.yaml.
 
   There are three flavors of the GPIO controller, one full featured
   input/output with interrupt support (kontron,sl28cpld-gpio), one
diff --git a/Documentation/devicetree/bindings/gpio/lacie,netxbig-gpio-ext.yaml b/Documentation/devicetree/bindings/gpio/lacie,netxbig-gpio-ext.yaml
new file mode 100644
index 000000000000..42021ee14125
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/lacie,netxbig-gpio-ext.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/lacie,netxbig-gpio-ext.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NetxBig GPIO extension bus
+
+maintainers:
+  - Simon Guinot <simon.guinot@sequanux.org>
+
+description: >
+  GPIO extension bus found on some LaCie/Seagate boards
+  (Example: 2Big/5Big Network v2, 2Big NAS).
+
+properties:
+  compatible:
+    items:
+      - const: lacie,netxbig-gpio-ext
+
+  addr-gpios:
+    description: GPIOs representing the address register (LSB->MSB).
+    items:
+      - description: bit 0 (LSB)
+      - description: bit 1
+      - description: bit 2 (MSB)
+
+  data-gpios:
+    description: GPIOs representing the data register (LSB->MSB).
+    items:
+      - description: bit 0 (LSB)
+      - description: bit 1
+      - description: bit 2 (MSB)
+
+  enable-gpio:
+    description: Latches the new configuration (address, data) on raising edge.
+    maxItems: 1
+
+required:
+  - compatible
+  - addr-gpios
+  - data-gpios
+  - enable-gpio
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpio {
+        compatible = "lacie,netxbig-gpio-ext";
+        addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+                      &gpio1 16 GPIO_ACTIVE_HIGH
+                      &gpio1 17 GPIO_ACTIVE_HIGH>;
+        data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+                      &gpio1 13 GPIO_ACTIVE_HIGH
+                      &gpio1 14 GPIO_ACTIVE_HIGH>;
+        enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/lantiq,gpio-mm-lantiq.yaml b/Documentation/devicetree/bindings/gpio/lantiq,gpio-mm-lantiq.yaml
new file mode 100644
index 000000000000..eaf53a89542a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/lantiq,gpio-mm-lantiq.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/lantiq,gpio-mm-lantiq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq SoC External Bus memory mapped GPIO controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description: |
+  By attaching hardware latches to the EBU it is possible to create output
+  only gpios. This driver configures a special memory address, which when
+  written to outputs 16 bit to the latches.
+
+  The node describing the memory mapped GPIOs needs to be a child of the node
+  describing the "lantiq,localbus".
+
+properties:
+  compatible:
+    enum:
+      - lantiq,gpio-mm-lantiq
+      - lantiq,gpio-mm
+
+  reg:
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  lantiq,shadow:
+    description: The default value that we shall assume as already set on the shift register cascade.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@4000000 {
+        compatible = "lantiq,gpio-mm-lantiq";
+        reg = <0x4000000 0x10>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        lantiq,shadow = <0x77f>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
new file mode 100644
index 000000000000..69852444df23
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/loongson,ls-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson GPIO controller.
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - loongson,ls2k-gpio
+          - loongson,ls2k0300-gpio
+          - loongson,ls2k0500-gpio0
+          - loongson,ls2k0500-gpio1
+          - loongson,ls2k2000-gpio0
+          - loongson,ls2k2000-gpio1
+          - loongson,ls2k2000-gpio2
+          - loongson,ls3a5000-gpio
+          - loongson,ls3a6000-gpio  # Loongson-3A6000 node GPIO
+          - loongson,ls7a-gpio
+          - loongson,ls7a2000-gpio1 # LS7A2000 chipset GPIO
+          - loongson,ls7a2000-gpio2 # LS7A2000 ACPI GPIO
+      - items:
+          - const: loongson,ls2k1000-gpio
+          - const: loongson,ls2k-gpio
+      - items:
+          - const: loongson,ls7a1000-gpio
+          - const: loongson,ls7a-gpio
+
+  reg:
+    maxItems: 1
+
+  ngpios:
+    minimum: 1
+    maximum: 128
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 64
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - ngpios
+  - "#gpio-cells"
+  - gpio-controller
+  - gpio-ranges
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: loongson,ls2k0300-gpio
+    then:
+      required:
+        - "#interrupt-cells"
+        - interrupt-controller
+        - resets
+    else:
+      properties:
+        "#interrupts-cells": false
+        interrupt-controller: false
+        resets: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio0: gpio@1fe00500 {
+      compatible = "loongson,ls2k1000-gpio", "loongson,ls2k-gpio";
+      reg = <0x1fe00500 0x38>;
+      ngpios = <64>;
+      #gpio-cells = <2>;
+      gpio-controller;
+      gpio-ranges = <&pctrl 0 0 15>,
+                    <&pctrl 16 16 15>,
+                    <&pctrl 32 32 10>,
+                    <&pctrl 44 44 20>;
+      interrupt-parent = <&liointc1>;
+      interrupts = <28 IRQ_TYPE_LEVEL_LOW>,
+                   <29 IRQ_TYPE_LEVEL_LOW>,
+                   <30 IRQ_TYPE_LEVEL_LOW>,
+                   <30 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <>,
+                   <>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/lsi,zevio-gpio.yaml b/Documentation/devicetree/bindings/gpio/lsi,zevio-gpio.yaml
new file mode 100644
index 000000000000..e9e201a489e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/lsi,zevio-gpio.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/lsi,zevio-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zevio GPIO controller
+
+maintainers:
+  - Pratik Farkase <pratikfarkase94@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: lsi,zevio-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gpio@90000000 {
+        compatible = "lsi,zevio-gpio";
+        reg = <0x90000000 0x1000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/maxim,max31910.yaml b/Documentation/devicetree/bindings/gpio/maxim,max31910.yaml
new file mode 100644
index 000000000000..4d200f9dffd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/maxim,max31910.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/maxim,max31910.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX3191x GPIO serializer
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max31910
+      - maxim,max31911
+      - maxim,max31912
+      - maxim,max31913
+      - maxim,max31953
+      - maxim,max31963
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  '#daisy-chained-devices':
+    description: Number of chips in the daisy-chain.
+    default: 1
+
+  maxim,modesel-gpios:
+    description:
+      GPIO pins to configure modesel of each chip. The number of GPIOs must
+      equal "#daisy-chained-devices" (if each chip is driven by a separate pin)
+      or 1 (if all chips are wired to the same pin).
+
+  maxim,fault-gpios:
+    description:
+      GPIO pins to read fault of each chip. The number of GPIOs must equal
+      "#daisy-chained-devices" or 1.
+
+  maxim,db0-gpios:
+    description:
+      GPIO pins to configure debounce of each chip. The number of GPIOs must
+      equal "#daisy-chained-devices" or 1.
+
+  maxim,db1-gpios:
+    description:
+      GPIO pins to configure debounce of each chip. The number of GPIOs must
+      equal "maxim,db0-gpios".
+
+  maxim,modesel-8bit:
+    description:
+      Boolean whether the modesel pin of the chips is pulled high (8-bit mode).
+      Use this if the modesel pin is hardwired and consequently
+      "maxim,modesel-gpios" cannot be specified. By default if neither this nor
+      "maxim,modesel-gpios" is given, the driver assumes that modesel is pulled
+      low (16-bit mode).
+    type: boolean
+
+  maxim,ignore-undervoltage:
+    description:
+      Boolean whether to ignore undervoltage alarms signaled by the
+      "maxim,fault-gpios" or by the status byte (in 16-bit mode). Use this if
+      the chips are powered through 5VOUT instead of VCC24V, in which case they
+      will constantly signal undervoltage.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@0 {
+            compatible = "maxim,max31913";
+            reg = <0>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            maxim,modesel-gpios = <&gpio2 23>;
+            maxim,fault-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+            maxim,db0-gpios = <&gpio2 25>;
+            maxim,db1-gpios = <&gpio2 26>;
+
+            spi-max-frequency = <25000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/maxim,max7360-gpio.yaml b/Documentation/devicetree/bindings/gpio/maxim,max7360-gpio.yaml
new file mode 100644
index 000000000000..c5c3fc4c816f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/maxim,max7360-gpio.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/maxim,max7360-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX7360 GPIO controller
+
+maintainers:
+  - Kamel Bouhara <kamel.bouhara@bootlin.com>
+  - Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
+
+description: |
+  Maxim MAX7360 GPIO controller, in MAX7360 chipset
+  https://www.analog.com/en/products/max7360.html
+
+  The device provides two series of GPIOs, referred here as GPIOs and GPOs.
+
+  PORT0 to PORT7 pins can be used as GPIOs, with support for interrupts and
+  constant-current mode. These pins will also be used by the rotary encoder and
+  PWM functionalities.
+
+  COL2 to COL7 pins can be used as GPOs, there is no input capability. COL pins
+  will be partitioned, with the first pins being affected to the keypad
+  functionality and the last ones as GPOs.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max7360-gpio
+      - maxim,max7360-gpo
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  maxim,constant-current-disable:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bit field, each bit disables constant-current output of the associated
+      GPIO, starting from the least significant bit for the first GPIO.
+    maximum: 0xff
+
+required:
+  - compatible
+  - gpio-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max7360-gpio
+        ngpios: false
+    then:
+      required:
+        - interrupt-controller
+    else:
+      properties:
+        interrupt-controller: false
+        maxim,constant-current-disable: false
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio {
+      compatible = "maxim,max7360-gpio";
+
+      gpio-controller;
+      #gpio-cells = <2>;
+      maxim,constant-current-disable = <0x06>;
+
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/maxim,max77759-gpio.yaml b/Documentation/devicetree/bindings/gpio/maxim,max77759-gpio.yaml
new file mode 100644
index 000000000000..55734190d5eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/maxim,max77759-gpio.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/maxim,max77759-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77759 GPIO
+
+maintainers:
+  - André Draszik <andre.draszik@linaro.org>
+
+description: |
+  This module is part of the MAX77759 PMIC. For additional information, see
+  Documentation/devicetree/bindings/mfd/maxim,max77759.yaml.
+
+  The MAX77759 is a PMIC integrating, amongst others, a GPIO controller
+  including interrupt support for 2 GPIO lines.
+
+properties:
+  compatible:
+    const: maxim,max77759-gpio
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 2
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
new file mode 100644
index 000000000000..184432d24ea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/microchip,mpfs-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS GPIO Controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,pic64gx-gpio
+          - const: microchip,mpfs-gpio
+      - enum:
+          - microchip,mpfs-gpio
+          - microchip,coregpio-rtl-v3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
+    minItems: 1
+    maxItems: 32
+
+  interrupt-controller: true
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  ngpios:
+    description:
+      The number of GPIOs available.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  gpio-controller: true
+  gpio-line-names: true
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+    required:
+      - gpio-hog
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,mpfs-gpio
+    then:
+      required:
+        - interrupts
+        - "#interrupt-cells"
+        - interrupt-controller
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@20122000 {
+        compatible = "microchip,mpfs-gpio";
+        reg = <0x20122000 0x1000>;
+        clocks = <&clkcfg 25>;
+        interrupt-parent = <&plic>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt b/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt
deleted file mode 100644
index dd031fc93b55..000000000000
--- a/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Microchip PIC32 GPIO devices (PIO).
-
-Required properties:
- - compatible: "microchip,pic32mzda-gpio"
- - reg: Base address and length for the device.
- - interrupts: The port interrupt shared by all pins.
- - gpio-controller: Marks the port as GPIO controller.
- - #gpio-cells: Two. The first cell is the pin number and
-   the second cell is used to specify the gpio polarity as defined in
-   defined in <dt-bindings/gpio/gpio.h>:
-      0 = GPIO_ACTIVE_HIGH
-      1 = GPIO_ACTIVE_LOW
-      2 = GPIO_OPEN_DRAIN
- - interrupt-controller: Marks the device node as an interrupt controller.
- - #interrupt-cells: Two. The first cell is the GPIO number and second cell
-   is used to specify the trigger type as defined in
-   <dt-bindings/interrupt-controller/irq.h>:
-      IRQ_TYPE_EDGE_RISING
-      IRQ_TYPE_EDGE_FALLING
-      IRQ_TYPE_EDGE_BOTH
- - clocks: Clock specifier (see clock bindings for details).
- - microchip,gpio-bank: Specifies which bank a controller owns.
- - gpio-ranges: Interaction with the PINCTRL subsystem.
-
-Example:
-
-/* PORTA */
-gpio0: gpio0@1f860000 {
-	compatible = "microchip,pic32mzda-gpio";
-	reg = <0x1f860000 0x100>;
-	interrupts = <118 IRQ_TYPE_LEVEL_HIGH>;
-	#gpio-cells = <2>;
-	gpio-controller;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	clocks = <&rootclk PB4CLK>;
-	microchip,gpio-bank = <0>;
-	gpio-ranges = <&pic32_pinctrl 0 0 16>;
-};
-
-keys {
-	...
-
-	button@sw1 {
-		label = "ESC";
-		linux,code = <1>;
-		gpios = <&gpio0 12 0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gpio/microchip,pic32mzda-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,pic32mzda-gpio.yaml
new file mode 100644
index 000000000000..d8d932c86697
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/microchip,pic32mzda-gpio.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/microchip,pic32mzda-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIC32 GPIO controller
+
+maintainers:
+  - Joshua Henderson <joshua.henderson@microchip.com>
+  - Purna Chandra Mandal <purna.mandal@microchip.com>
+
+properties:
+  compatible:
+    const: microchip,pic32mzda-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-ranges: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  microchip,gpio-bank:
+    description: Bank index owned by the controller
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - gpio-ranges
+  - "#gpio-cells"
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - clocks
+  - microchip,gpio-bank
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@1f860000 {
+        compatible = "microchip,pic32mzda-gpio";
+        reg = <0x1f860000 0x100>;
+        interrupts = <118 IRQ_TYPE_LEVEL_HIGH>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        clocks = <&rootclk 11>;
+        microchip,gpio-bank = <0>;
+        gpio-ranges = <&pic32_pinctrl 0 0 16>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
index 9cf6137dd524..65155bb701a9 100644
--- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml
@@ -9,7 +9,7 @@ title: Marvell PXA GPIO controller
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 allOf:
   - if:
diff --git a/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
index fe1e1c63ffe3..18fe90387b87 100644
--- a/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
@@ -14,7 +14,9 @@ properties:
     pattern: "^gpio@[0-9a-f]+$"
 
   compatible:
-    const: mstar,msc313-gpio
+    enum:
+      - mstar,msc313-gpio
+      - sstar,ssd20xd-gpio
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt b/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
deleted file mode 100644
index 50ec2e690701..000000000000
--- a/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Binding for the GPIO extension bus found on some LaCie/Seagate boards
-(Example: 2Big/5Big Network v2, 2Big NAS).
-
-Required properties:
-- compatible: "lacie,netxbig-gpio-ext".
-- addr-gpios: GPIOs representing the address register (LSB -> MSB).
-- data-gpios: GPIOs representing the data register (LSB -> MSB).
-- enable-gpio: latches the new configuration (address, data) on raising edge.
-
-Example:
-
-netxbig_gpio_ext: netxbig-gpio-ext {
-	compatible = "lacie,netxbig-gpio-ext";
-
-	addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
-		      &gpio1 16 GPIO_ACTIVE_HIGH
-		      &gpio1 17 GPIO_ACTIVE_HIGH>;
-	data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
-		      &gpio1 13 GPIO_ACTIVE_HIGH
-		      &gpio1 14 GPIO_ACTIVE_HIGH>;
-	enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt b/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt
deleted file mode 100644
index ca2f8c745a27..000000000000
--- a/Documentation/devicetree/bindings/gpio/ni,169445-nand-gpio.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Bindings for the National Instruments 169445 GPIO NAND controller
-
-The 169445 GPIO NAND controller has two memory mapped GPIO registers, one
-for input (the ready signal) and one for output (control signals).  It is
-intended to be used with the GPIO NAND driver.
-
-Required properties:
-	- compatible: should be "ni,169445-nand-gpio"
-	- reg-names: must contain
-		"dat" - data register
-	- reg: address + size pairs describing the GPIO register sets;
-		order must correspond with the order of entries in reg-names
-	- #gpio-cells: must be set to 2. The first cell is the pin number and
-			the second cell is used to specify the gpio polarity:
-			0 = active high
-			1 = active low
-	- gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
-	- no-output: disables driving output on the pins
-
-Examples:
-	gpio1: nand-gpio-out@1f300010 {
-		compatible = "ni,169445-nand-gpio";
-		reg = <0x1f300010 0x4>;
-		reg-names = "dat";
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	gpio2: nand-gpio-in@1f300014 {
-		compatible = "ni,169445-nand-gpio";
-		reg = <0x1f300014 0x4>;
-		reg-names = "dat";
-		gpio-controller;
-		#gpio-cells = <2>;
-		no-output;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt b/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
deleted file mode 100644
index df63da46309c..000000000000
--- a/Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Nintendo Wii (Hollywood) GPIO controller
-
-Required properties:
-- compatible: "nintendo,hollywood-gpio"
-- reg: Physical base address and length of the controller's registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the pin number and the
-  second cell is used to specify optional parameters:
-   - bit 0 specifies polarity (0 for normal, 1 for inverted).
-
-Optional properties:
-- ngpios: see Documentation/devicetree/bindings/gpio/gpio.txt
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be two.
-- interrupts: Interrupt specifier for the controller's Broadway (PowerPC)
-  interrupt.
-
-Example:
-
-	GPIO: gpio@d8000c0 {
-		#gpio-cells = <2>;
-		compatible = "nintendo,hollywood-gpio";
-		reg = <0x0d8000c0 0x40>;
-		gpio-controller;
-		ngpios = <24>;
-	}
diff --git a/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
new file mode 100644
index 000000000000..9e32e54aeb24
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nuvoton,sgpio.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nuvoton,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton SGPIO controller
+
+maintainers:
+  - Jim LIU <JJLIU0@nuvoton.com>
+
+description: |
+  This SGPIO controller is for NUVOTON NPCM7xx and NPCM8xx SoC and detailed
+  information is in the NPCM7XX/8XX SERIAL I/O EXPANSION INTERFACE section.
+  Nuvoton NPCM7xx SGPIO module is combines a serial to parallel IC (HC595)
+  and a parallel to serial IC (HC165).
+  Clock is a division of the APB3 clock.
+  This interface has 4 pins (D_out , D_in, S_CLK, LDSH).
+  NPCM7xx/NPCM8xx have two sgpio modules. Each module can support up
+  to 64 output pins, and up to 64 input pins, the pin is only for GPI or GPO.
+  GPIO pins can be programmed to support the following options
+  - Support interrupt option for each input port and various interrupt
+    sensitivity options (level-high, level-low, edge-high, edge-low)
+  - ngpios is number of nuvoton,input-ngpios GPIO lines and nuvoton,output-ngpios GPIO lines.
+    nuvoton,input-ngpios GPIO lines is only for GPI.
+    nuvoton,output-ngpios GPIO lines is only for GPO.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-sgpio
+      - nuvoton,npcm845-sgpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  nuvoton,input-ngpios:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The numbers of GPIO's exposed. GPIO lines are only for GPI.
+    minimum: 0
+    maximum: 64
+
+  nuvoton,output-ngpios:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The numbers of GPIO's exposed. GPIO lines are only for GPO.
+    minimum: 0
+    maximum: 64
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupts
+  - nuvoton,input-ngpios
+  - nuvoton,output-ngpios
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    gpio8: gpio@101000 {
+        compatible = "nuvoton,npcm750-sgpio";
+        reg = <0x101000 0x200>;
+        clocks = <&clk NPCM7XX_CLK_APB3>;
+        interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        nuvoton,input-ngpios = <64>;
+        nuvoton,output-ngpios = <64>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt
deleted file mode 100644
index adff16c71d21..000000000000
--- a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt
+++ /dev/null
@@ -1,165 +0,0 @@
-NVIDIA Tegra186 GPIO controllers
-
-Tegra186 contains two GPIO controllers; a main controller and an "AON"
-controller. This binding document applies to both controllers. The register
-layouts for the controllers share many similarities, but also some significant
-differences. Hence, this document describes closely related but different
-bindings and compatible values.
-
-The Tegra186 GPIO controller allows software to set the IO direction of, and
-read/write the value of, numerous GPIO signals. Routing of GPIO signals to
-package balls is under the control of a separate pin controller HW block. Two
-major sets of registers exist:
-
-a) Security registers, which allow configuration of allowed access to the GPIO
-register set. These registers exist in a single contiguous block of physical
-address space. The size of this block, and the security features available,
-varies between the different GPIO controllers.
-
-Access to this set of registers is not necessary in all circumstances. Code
-that wishes to configure access to the GPIO registers needs access to these
-registers to do so. Code which simply wishes to read or write GPIO data does not
-need access to these registers.
-
-b) GPIO registers, which allow manipulation of the GPIO signals. In some GPIO
-controllers, these registers are exposed via multiple "physical aliases" in
-address space, each of which access the same underlying state. See the hardware
-documentation for rationale. Any particular GPIO client is expected to access
-just one of these physical aliases.
-
-Tegra HW documentation describes a unified naming convention for all GPIOs
-implemented by the SoC. Each GPIO is assigned to a port, and a port may control
-a number of GPIOs. Thus, each GPIO is named according to an alphabetical port
-name and an integer GPIO name within the port. For example, GPIO_PA0, GPIO_PN6,
-or GPIO_PCC3.
-
-The number of ports implemented by each GPIO controller varies. The number of
-implemented GPIOs within each port varies. GPIO registers within a controller
-are grouped and laid out according to the port they affect.
-
-The mapping from port name to the GPIO controller that implements that port, and
-the mapping from port name to register offset within a controller, are both
-extremely non-linear. The header file <dt-bindings/gpio/tegra186-gpio.h>
-describes the port-level mapping. In that file, the naming convention for ports
-matches the HW documentation. The values chosen for the names are alphabetically
-sorted within a particular controller. Drivers need to map between the DT GPIO
-IDs and HW register offsets using a lookup table.
-
-Each GPIO controller can generate a number of interrupt signals. Each signal
-represents the aggregate status for all GPIOs within a set of ports. Thus, the
-number of interrupt signals generated by a controller varies as a rough function
-of the number of ports it implements. Note that the HW documentation refers to
-both the overall controller HW module and the sets-of-ports as "controllers".
-
-Each GPIO controller in fact generates multiple interrupts signals for each set
-of ports. Each GPIO may be configured to feed into a specific one of the
-interrupt signals generated by a set-of-ports. The intent is for each generated
-signal to be routed to a different CPU, thus allowing different CPUs to each
-handle subsets of the interrupts within a port. The status of each of these
-per-port-set signals is reported via a separate register. Thus, a driver needs
-to know which status register to observe. This binding currently defines no
-configuration mechanism for this. By default, drivers should use register
-GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could
-define a property to configure this.
-
-Required properties:
-- compatible
-    Array of strings.
-    One of:
-    - "nvidia,tegra186-gpio".
-    - "nvidia,tegra186-gpio-aon".
-    - "nvidia,tegra194-gpio".
-    - "nvidia,tegra194-gpio-aon".
-- reg-names
-    Array of strings.
-    Contains a list of names for the register spaces described by the reg
-    property. May contain the following entries, in any order:
-    - "gpio": Mandatory. GPIO control registers. This may cover either:
-        a) The single physical alias that this OS should use.
-        b) All physical aliases that exist in the controller. This is
-           appropriate when the OS is responsible for managing assignment of
-           the physical aliases.
-    - "security": Optional. Security configuration registers.
-    Users of this binding MUST look up entries in the reg property by name,
-    using this reg-names property to do so.
-- reg
-    Array of (physical base address, length) tuples.
-    Must contain one entry per entry in the reg-names property, in a matching
-    order.
-- interrupts
-    Array of interrupt specifiers.
-    The interrupt outputs from the HW block, one per set of ports, in the
-    order the HW manual describes them. The number of entries required varies
-    depending on compatible value:
-    - "nvidia,tegra186-gpio": 6 entries.
-    - "nvidia,tegra186-gpio-aon": 1 entry.
-    - "nvidia,tegra194-gpio": 6 entries.
-    - "nvidia,tegra194-gpio-aon": 1 entry.
-- gpio-controller
-    Boolean.
-    Marks the device node as a GPIO controller/provider.
-- #gpio-cells
-    Single-cell integer.
-    Must be <2>.
-    Indicates how many cells are used in a consumer's GPIO specifier.
-    In the specifier:
-    - The first cell is the pin number.
-        See <dt-bindings/gpio/tegra186-gpio.h>.
-    - The second cell contains flags:
-        - Bit 0 specifies polarity
-            - 0: Active-high (normal).
-            - 1: Active-low (inverted).
-- interrupt-controller
-    Boolean.
-    Marks the device node as an interrupt controller/provider.
-- #interrupt-cells
-    Single-cell integer.
-    Must be <2>.
-    Indicates how many cells are used in a consumer's interrupt specifier.
-    In the specifier:
-    - The first cell is the GPIO number.
-        See <dt-bindings/gpio/tegra186-gpio.h>.
-    - The second cell is contains flags:
-        - Bits [3:0] indicate trigger type and level:
-            - 1: Low-to-high edge triggered.
-            - 2: High-to-low edge triggered.
-            - 4: Active high level-sensitive.
-            - 8: Active low level-sensitive.
-            Valid combinations are 1, 2, 3, 4, 8.
-
-Example:
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-gpio@2200000 {
-	compatible = "nvidia,tegra186-gpio";
-	reg-names = "security", "gpio";
-	reg =
-		<0x0 0x2200000 0x0 0x10000>,
-		<0x0 0x2210000 0x0 0x10000>;
-	interrupts =
-		<0 47 IRQ_TYPE_LEVEL_HIGH>,
-		<0 50 IRQ_TYPE_LEVEL_HIGH>,
-		<0 53 IRQ_TYPE_LEVEL_HIGH>,
-		<0 56 IRQ_TYPE_LEVEL_HIGH>,
-		<0 59 IRQ_TYPE_LEVEL_HIGH>,
-		<0 180 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-gpio@c2f0000 {
-	compatible = "nvidia,tegra186-gpio-aon";
-	reg-names = "security", "gpio";
-	reg =
-		<0x0 0xc2f0000 0x0 0x1000>,
-		<0x0 0xc2f1000 0x0 0x1000>;
-	interrupts =
-		<0 60 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
new file mode 100644
index 000000000000..2bd620a1099b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nvidia,tegra186-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPIO Controller (Tegra186 and later)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  Tegra186 contains two GPIO controllers; a main controller and an "AON"
+  controller. This binding document applies to both controllers. The register
+  layouts for the controllers share many similarities, but also some
+  significant differences. Hence, this document describes closely related but
+  different bindings and compatible values.
+
+  The Tegra186 GPIO controller allows software to set the IO direction of,
+  and read/write the value of, numerous GPIO signals. Routing of GPIO signals
+  to package balls is under the control of a separate pin controller hardware
+  block. Two major sets of registers exist:
+
+    a) Security registers, which allow configuration of allowed access to the
+       GPIO register set. These registers exist in a single contiguous block
+       of physical address space. The size of this block, and the security
+       features available, varies between the different GPIO controllers.
+
+       Access to this set of registers is not necessary in all circumstances.
+       Code that wishes to configure access to the GPIO registers needs access
+       to these registers to do so. Code which simply wishes to read or write
+       GPIO data does not need access to these registers.
+
+    b) GPIO registers, which allow manipulation of the GPIO signals. In some
+       GPIO controllers, these registers are exposed via multiple "physical
+       aliases" in address space, each of which access the same underlying
+       state. See the hardware documentation for rationale. Any particular
+       GPIO client is expected to access just one of these physical aliases.
+
+    Tegra HW documentation describes a unified naming convention for all GPIOs
+    implemented by the SoC. Each GPIO is assigned to a port, and a port may
+    control a number of GPIOs. Thus, each GPIO is named according to an
+    alphabetical port name and an integer GPIO name within the port. For
+    example, GPIO_PA0, GPIO_PN6, or GPIO_PCC3.
+
+    The number of ports implemented by each GPIO controller varies. The number
+    of implemented GPIOs within each port varies. GPIO registers within a
+    controller are grouped and laid out according to the port they affect.
+
+    The mapping from port name to the GPIO controller that implements that
+    port, and the mapping from port name to register offset within a
+    controller, are both extremely non-linear. The header file
+    <dt-bindings/gpio/tegra186-gpio.h> describes the port-level mapping. In
+    that file, the naming convention for ports matches the HW documentation.
+    The values chosen for the names are alphabetically sorted within a
+    particular controller. Drivers need to map between the DT GPIO IDs and HW
+    register offsets using a lookup table.
+
+    Each GPIO controller can generate a number of interrupt signals. Each
+    signal represents the aggregate status for all GPIOs within a set of
+    ports. Thus, the number of interrupt signals generated by a controller
+    varies as a rough function of the number of ports it implements. Note
+    that the HW documentation refers to both the overall controller HW
+    module and the sets-of-ports as "controllers".
+
+    Each GPIO controller in fact generates multiple interrupts signals for
+    each set of ports. Each GPIO may be configured to feed into a specific
+    one of the interrupt signals generated by a set-of-ports. The intent is
+    for each generated signal to be routed to a different CPU, thus allowing
+    different CPUs to each handle subsets of the interrupts within a port.
+    The status of each of these per-port-set signals is reported via a
+    separate register. Thus, a driver needs to know which status register to
+    observe. This binding currently defines no configuration mechanism for
+    this. By default, drivers should use register
+    GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could
+    define a property to configure this.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-gpio
+      - nvidia,tegra186-gpio-aon
+      - nvidia,tegra194-gpio
+      - nvidia,tegra194-gpio-aon
+      - nvidia,tegra234-gpio
+      - nvidia,tegra234-gpio-aon
+      - nvidia,tegra256-gpio
+
+  reg-names:
+    items:
+      - const: security
+      - const: gpio
+    minItems: 1
+
+  reg:
+    items:
+      - description: Security configuration registers.
+      - description: |
+          GPIO control registers. This may cover either:
+
+            a) The single physical alias that this OS should use.
+            b) All physical aliases that exist in the controller. This is
+               appropriate when the OS is responsible for managing assignment
+               of the physical aliases.
+    minItems: 1
+
+  interrupts:
+    description: The interrupt outputs from the HW block, one per set of
+      ports, in the order the HW manual describes them. The number of entries
+      required varies depending on compatible value.
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  "#gpio-cells":
+    description: |
+      Indicates how many cells are used in a consumer's GPIO specifier. In the
+      specifier:
+
+        - The first cell is the pin number.
+          See <dt-bindings/gpio/tegra186-gpio.h>.
+        - The second cell contains flags:
+          - Bit 0 specifies polarity
+            - 0: Active-high (normal).
+            - 1: Active-low (inverted).
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: |
+      Indicates how many cells are used in a consumer's interrupt specifier.
+      In the specifier:
+
+        - The first cell is the GPIO number.
+          See <dt-bindings/gpio/tegra186-gpio.h>.
+        - The second cell is contains flags:
+          - Bits [3:0] indicate trigger type and level:
+            - 1: Low-to-high edge triggered.
+            - 2: High-to-low edge triggered.
+            - 4: Active high level-sensitive.
+            - 8: Active low level-sensitive.
+
+            Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-gpio
+              - nvidia,tegra194-gpio
+              - nvidia,tegra234-gpio
+              - nvidia,tegra256-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 48
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-gpio-aon
+              - nvidia,tegra194-gpio-aon
+              - nvidia,tegra234-gpio-aon
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@2200000 {
+        compatible = "nvidia,tegra186-gpio";
+        reg-names = "security", "gpio";
+        reg = <0x2200000 0x10000>,
+              <0x2210000 0x10000>;
+        interrupts = <0  47 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  50 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  53 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  56 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  59 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 180 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    gpio@c2f0000 {
+        compatible = "nvidia,tegra186-gpio-aon";
+        reg-names = "security", "gpio";
+        reg = <0xc2f0000 0x1000>,
+              <0xc2f1000 0x1000>;
+        interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt
deleted file mode 100644
index 023c9526e5f8..000000000000
--- a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-NVIDIA Tegra GPIO controller
-
-Required properties:
-- compatible : "nvidia,tegra<chip>-gpio"
-- reg : Physical base address and length of the controller's registers.
-- interrupts : The interrupt outputs from the controller. For Tegra20,
-  there should be 7 interrupts specified, and for Tegra30, there should
-  be 8 interrupts specified.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters:
-  - bit 0 specifies polarity (0 for normal, 1 for inverted)
-- gpio-controller : Marks the device node as a GPIO controller.
-- #interrupt-cells : Should be 2.
-  The first cell is the GPIO number.
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-      Valid combinations are 1, 2, 3, 4, 8.
-- interrupt-controller : Marks the device node as an interrupt controller.
-
-Example:
-
-gpio: gpio@6000d000 {
-	compatible = "nvidia,tegra20-gpio";
-	reg = < 0x6000d000 0x1000 >;
-	interrupts = < 0 32 0x04
-		       0 33 0x04
-		       0 34 0x04
-		       0 35 0x04
-		       0 55 0x04
-		       0 87 0x04
-		       0 89 0x04 >;
-	#gpio-cells = <2>;
-	gpio-controller;
-	#interrupt-cells = <2>;
-	interrupt-controller;
-};
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml
new file mode 100644
index 000000000000..94b51749ee76
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nvidia,tegra20-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPIO Controller (Tegra20 - Tegra210)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-gpio
+          - nvidia,tegra30-gpio
+
+      - items:
+          - enum:
+              - nvidia,tegra114-gpio
+              - nvidia,tegra124-gpio
+              - nvidia,tegra210-gpio
+          - const: nvidia,tegra30-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The interrupt outputs from the controller. For Tegra20,
+      there should be 7 interrupts specified, and for Tegra30, there should
+      be 8 interrupts specified.
+
+  "#gpio-cells":
+    description: The first cell is the pin number and the second cell is used
+      to specify the GPIO polarity (0 = active high, 1 = active low).
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  "#interrupt-cells":
+    description: |
+      Should be 2. The first cell is the GPIO number. The second cell is
+      used to specify flags:
+
+        bits[3:0] trigger type and level flags:
+          1 = low-to-high edge triggered.
+          2 = high-to-low edge triggered.
+          4 = active high level-sensitive.
+          8 = active low level-sensitive.
+
+      Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+  interrupt-controller: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra30-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+          maxItems: 8
+    else:
+      properties:
+        interrupts:
+          minItems: 7
+          maxItems: 7
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - gpio-controller
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties:
+  type: object
+  required:
+    - gpio-hog
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio: gpio@6000d000 {
+        compatible = "nvidia,tegra20-gpio";
+        reg = <0x6000d000 0x1000>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
deleted file mode 100644
index 627efc78ecf2..000000000000
--- a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-NXP LPC18xx/43xx GPIO controller Device Tree Bindings
------------------------------------------------------
-
-Required properties:
-- compatible		: Should be "nxp,lpc1850-gpio"
-- reg			: List of addresses and lengths of the GPIO controller
-			  register sets
-- reg-names		: Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and
-			  "gpio-gpoup1-ic"
-- clocks		: Phandle and clock specifier pair for GPIO controller
-- resets		: Phandle and reset specifier pair for GPIO controller
-- gpio-controller	: Marks the device node as a GPIO controller
-- #gpio-cells 		: Should be two:
-			  - The first cell is the GPIO line number
-			  - The second cell is used to specify polarity
-- interrupt-controller	: Marks the device node as an interrupt controller
-- #interrupt-cells	: Should be two:
-			  - The first cell is an interrupt number within
-			    0..9 range, for GPIO pin interrupts it is equal
-			    to 'nxp,gpio-pin-interrupt' property value of
-			    GPIO pin configuration, 8 is for GPIO GROUP0
-			    interrupt, 9 is for GPIO GROUP1 interrupt
-			  - The second cell is used to specify interrupt type
-
-Optional properties:
-- gpio-ranges		: Mapping between GPIO and pinctrl
-
-Example:
-#define LPC_GPIO(port, pin)	(port * 32 + pin)
-#define LPC_PIN(port, pin)	(0x##port * 32 + pin)
-
-gpio: gpio@400f4000 {
-	compatible = "nxp,lpc1850-gpio";
-	reg = <0x400f4000 0x4000>, <0x40087000 0x1000>,
-	      <0x40088000 0x1000>, <0x40089000 0x1000>;
-	reg-names = "gpio", "gpio-pin-ic",
-		    "gpio-group0-ic", "gpio-gpoup1-ic";
-	clocks = <&ccu1 CLK_CPU_GPIO>;
-	resets = <&rgu 28>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	gpio-ranges =	<&pinctrl LPC_GPIO(0,0)  LPC_PIN(0,0)  2>,
-			...
-			<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5)  7>;
-};
-
-gpio_joystick {
-	compatible = "gpio-keys";
-	...
-
-	button0 {
-		...
-		interrupt-parent = <&gpio>;
-		interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
-		gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.yaml b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.yaml
new file mode 100644
index 000000000000..0ef5f90f69ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nxp,lpc1850-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC18xx/43xx GPIO controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: nxp,lpc1850-gpio
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: gpio
+      - const: gpio-pin-ic
+      - const: gpio-group0-ic
+      - const: gpio-gpoup1-ic
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      - The first cell is an interrupt number within
+        0..9 range, for GPIO pin interrupts it is equal
+        to 'nxp,gpio-pin-interrupt' property value of
+        GPIO pin configuration, 8 is for GPIO GROUP0
+        interrupt, 9 is for GPIO GROUP1 interrupt
+      - The second cell is used to specify interrupt type
+
+  gpio-ranges: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+    gpio@400f4000 {
+        compatible = "nxp,lpc1850-gpio";
+        reg = <0x400f4000 0x4000>, <0x40087000 0x1000>,
+              <0x40088000 0x1000>, <0x40089000 0x1000>;
+        reg-names = "gpio", "gpio-pin-ic", "gpio-group0-ic", "gpio-gpoup1-ic";
+        clocks = <&ccu1 CLK_CPU_GPIO>;
+        resets = <&rgu 28>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc3220-gpio.yaml b/Documentation/devicetree/bindings/gpio/nxp,lpc3220-gpio.yaml
new file mode 100644
index 000000000000..25b5494393cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nxp,lpc3220-gpio.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nxp,lpc3220-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC3220 SoC GPIO controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+properties:
+  compatible:
+    const: nxp,lpc3220-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 3
+    description: |
+      1) bank:
+        0: GPIO P0
+        1: GPIO P1
+        2: GPIO P2
+        3: GPIO P3
+        4: GPI P3
+        5: GPO P3
+      2) pin number
+      3) flags:
+        - bit 0 specifies polarity (0 for normal, 1 for inverted)
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@40028000 {
+        compatible = "nxp,lpc3220-gpio";
+        reg = <0x40028000 0x1000>;
+        gpio-controller;
+        #gpio-cells = <3>; /* bank, pin, flags */
+    };
diff --git a/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
index f0ff66c4c74e..5a6ecaa7b44b 100644
--- a/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
+++ b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
@@ -39,6 +39,10 @@ properties:
   reg:
     maxItems: 1
 
+  gpio-line-names:
+    minItems: 1
+    maxItems: 16
+
   gpio-controller: true
 
   '#gpio-cells':
@@ -69,6 +73,43 @@ properties:
 
   wakeup-source: true
 
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO controlling the (reset active LOW) RESET# pin.
+
+      The active polarity of the GPIO must translate to the low state of the
+      RESET# pin on the IC, i.e. if a GPIO is directly routed to the RESET# pin
+      without any inverter, GPIO_ACTIVE_LOW is expected.
+
+      Performing a reset makes all lines initialized to their input (pulled-up)
+      state.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - nxp,pca9670
+                - nxp,pca9671
+                - nxp,pca9672
+                - nxp,pca9673
+    then:
+      properties:
+        reset-gpios: false
+
+  # lines-initial-states XOR reset-gpios
+  # Performing a reset reinitializes all lines to a known state which
+  # may not match passed lines-initial-states
+  - if:
+      required:
+        - lines-initial-states
+    then:
+      properties:
+        reset-gpios: false
+
 patternProperties:
   "^(.+-hog(-[0-9]+)?)$":
     type: object
@@ -87,17 +128,17 @@ additionalProperties: false
 examples:
   - |
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            pcf8575: gpio@20 {
-                    compatible = "nxp,pcf8575";
-                    reg = <0x20>;
-                    interrupt-parent = <&irqpin2>;
-                    interrupts = <3 0>;
-                    gpio-controller;
-                    #gpio-cells = <2>;
-                    interrupt-controller;
-                    #interrupt-cells = <2>;
-            };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@20 {
+            compatible = "nxp,pcf8575";
+            reg = <0x20>;
+            interrupt-parent = <&irqpin2>;
+            interrupts = <3 0>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/gpio/pisosr-gpio.yaml b/Documentation/devicetree/bindings/gpio/pisosr-gpio.yaml
new file mode 100644
index 000000000000..db98ba413fb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/pisosr-gpio.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/pisosr-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Parallel-in/Serial-out Shift Register GPIO Driver
+
+description:
+  This binding describes generic parallel-in/serial-out shift register
+  devices that can be used for GPI (General Purpose Input). This includes
+  SN74165 serial-out shift registers and the SN65HVS88x series of
+  industrial serializers.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - pisosr-gpio
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  ngpios:
+    maximum: 32
+    default: 8
+
+  load-gpios:
+    description:
+      GPIO pin specifier attached to load enable, this
+      pin is pulsed before reading from the device to
+      load input pin values into the device.
+
+  spi-cpol: true
+
+required:
+  - compatible
+  - gpio-controller
+  - '#gpio-cells'
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@0 {
+            compatible = "pisosr-gpio";
+            reg = <0>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
index bd35cbf7fa09..c51e10680c0a 100644
--- a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
@@ -60,9 +60,6 @@ properties:
 required:
   - compatible
   - reg
-  - interrupts
-  - interrupt-controller
-  - "#interrupt-cells"
   - clocks
   - "#gpio-cells"
   - gpio-controller
diff --git a/Documentation/devicetree/bindings/gpio/qca,ar7100-gpio.yaml b/Documentation/devicetree/bindings/gpio/qca,ar7100-gpio.yaml
new file mode 100644
index 000000000000..519c4c2158f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/qca,ar7100-gpio.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/qca,ar7100-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR7xxx/AR9xxx GPIO controller
+
+maintainers:
+  - Alban Bedel <albeu@free.fr>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qca,ar9132-gpio
+          - const: qca,ar7100-gpio
+      - enum:
+          - qca,ar7100-gpio
+          - qca,ar9340-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  ngpios: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@18040000 {
+        compatible = "qca,ar9132-gpio", "qca,ar7100-gpio";
+        reg = <0x18040000 0x30>;
+        interrupts = <2>;
+        ngpios = <22>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt b/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt
deleted file mode 100644
index ce97265e23ba..000000000000
--- a/Documentation/devicetree/bindings/gpio/raspberrypi,firmware-gpio.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Raspberry Pi GPIO expander
-
-The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware. The
-firmware exposes a mailbox interface that allows the ARM core to control the
-GPIO lines on the expander.
-
-The Raspberry Pi GPIO expander node must be a child node of the Raspberry Pi
-firmware node.
-
-Required properties:
-
-- compatible : Should be "raspberrypi,firmware-gpio"
-- gpio-controller : Marks the device node as a gpio controller
-- #gpio-cells : Should be two.  The first cell is the pin number, and
-  the second cell is used to specify the gpio polarity:
-  0 = active high
-  1 = active low
-
-Example:
-
-firmware: firmware-rpi {
-	compatible = "raspberrypi,bcm2835-firmware";
-	mboxes = <&mailbox>;
-
-	expgpio: gpio {
-		 compatible = "raspberrypi,firmware-gpio";
-		 gpio-controller;
-		 #gpio-cells = <2>;
-	 };
-};
diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
index 100f20cebd76..728099c65824 100644
--- a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
@@ -28,10 +28,11 @@ properties:
       - enum:
           - realtek,rtl8380-gpio
           - realtek,rtl8390-gpio
+          - realtek,rtl9300-gpio
+          - realtek,rtl9310-gpio
       - const: realtek,otto-gpio
 
-  reg:
-    maxItems: 1
+  reg: true
 
   "#gpio-cells":
     const: 2
@@ -50,6 +51,23 @@ properties:
   interrupts:
     maxItems: 1
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: realtek,rtl9300-gpio
+then:
+  properties:
+    reg:
+      items:
+        - description: GPIO and interrupt control
+        - description: interrupt CPU map
+else:
+  properties:
+    reg:
+      items:
+        - description: GPIO and interrupt control
+
 required:
   - compatible
   - reg
@@ -63,7 +81,7 @@ dependencies:
 
 examples:
   - |
-      gpio@3500 {
+    gpio@3500 {
         compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
         reg = <0x3500 0x1c>;
         gpio-controller;
@@ -73,6 +91,18 @@ examples:
         #interrupt-cells = <2>;
         interrupt-parent = <&rtlintc>;
         interrupts = <23>;
-      };
+    };
+  - |
+    gpio@3300 {
+        compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
+        reg = <0x3300 0x1c>, <0x3338 0x8>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        ngpios = <24>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&rtlintc>;
+        interrupts = <13>;
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml
new file mode 100644
index 000000000000..dd768db37a98
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/realtek,rtd-gpio.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/realtek,rtd-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC GPIO controller
+
+maintainers:
+  - Tzuyi Chang <tychang@realtek.com>
+
+description:
+  The GPIO controller is designed for the Realtek DHC (Digital Home Center)
+  RTD series SoC family, which are high-definition media processor SoCs.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtd1295-misc-gpio
+      - realtek,rtd1295-iso-gpio
+      - realtek,rtd1315e-iso-gpio
+      - realtek,rtd1319-iso-gpio
+      - realtek,rtd1319d-iso-gpio
+      - realtek,rtd1395-iso-gpio
+      - realtek,rtd1619-iso-gpio
+      - realtek,rtd1619b-iso-gpio
+
+  reg:
+    items:
+      - description: GPIO controller registers
+      - description: GPIO interrupt registers
+
+  interrupts:
+    items:
+      - description: Interrupt number of the assert GPIO interrupt, which is
+                     triggered when there is a rising edge.
+      - description: Interrupt number of the deassert GPIO interrupt, which is
+                     triggered when there is a falling edge.
+
+  gpio-ranges: true
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-ranges
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@100 {
+      compatible = "realtek,rtd1319d-iso-gpio";
+      reg = <0x100 0x100>,
+            <0x0 0xb0>;
+      interrupt-parent = <&iso_irq_mux>;
+      interrupts = <19>, <20>;
+      gpio-ranges = <&pinctrl 0 0 82>;
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml b/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml
index 8bdef812c87c..49fb8f613ead 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml
+++ b/Documentation/devicetree/bindings/gpio/renesas,em-gio.yaml
@@ -57,14 +57,14 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     gpio0: gpio@e0050000 {
-            compatible = "renesas,em-gio";
-            reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
-            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-            gpio-controller;
-            #gpio-cells = <2>;
-            gpio-ranges = <&pfc 0 0 32>;
-            ngpios = <32>;
-            interrupt-controller;
-            #interrupt-cells = <2>;
+        compatible = "renesas,em-gio";
+        reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+        interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pfc 0 0 32>;
+        ngpios = <32>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
     };
diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
index f2541739ee3b..d32e103a64aa 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -49,7 +49,12 @@ properties:
           - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
 
       - items:
-          - const: renesas,gpio-r8a779a0  # R-Car V3U
+          - enum:
+              - renesas,gpio-r8a779a0     # R-Car V3U
+              - renesas,gpio-r8a779f0     # R-Car S4-8
+              - renesas,gpio-r8a779g0     # R-Car V4H
+              - renesas,gpio-r8a779h0     # R-Car V4M
+          - const: renesas,rcar-gen4-gpio # R-Car Gen4
 
   reg:
     maxItems: 1
@@ -133,16 +138,16 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/power/r8a77470-sysc.h>
     gpio3: gpio@e6053000 {
-            compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio";
-            reg = <0xe6053000 0x50>;
-            interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 909>;
-            power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
-            resets = <&cpg 909>;
-            gpio-controller;
-            #gpio-cells = <2>;
-            gpio-ranges = <&pfc 0 96 30>;
-            gpio-reserved-ranges = <17 10>;
-            interrupt-controller;
-            #interrupt-cells = <2>;
+        compatible = "renesas,gpio-r8a77470", "renesas,rcar-gen2-gpio";
+        reg = <0xe6053000 0x50>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 909>;
+        power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+        resets = <&cpg 909>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pfc 0 96 30>;
+        gpio-reserved-ranges = <17 10>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
      };
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
index d4e42c2b995b..bdd83f42615c 100644
--- a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
+++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
@@ -27,6 +27,8 @@ properties:
       - description: APB interface clock source
       - description: GPIO debounce reference clock source
 
+  gpio-ranges: true
+
   gpio-controller: true
 
   gpio-line-names: true
@@ -39,6 +41,16 @@ properties:
   "#interrupt-cells":
     const: 2
 
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml b/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
deleted file mode 100644
index d8cce73ea0ae..000000000000
--- a/Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
+++ /dev/null
@@ -1,50 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Rockchip RK3328 General Register Files GPIO controller
-
-description:
-  The Rockchip RK3328 General Register File (GRF) outputs only the
-  GPIO_MUTE pin, originally for codec mute control, but it can also be used
-  for general purpose. It is manipulated by the GRF_SOC_CON10 register.
-  If needed in the future support for the HDMI pins can also be added.
-  The GPIO node should be declared as the child of the GRF node.
-
-  The GPIO_MUTE pin is referred to in the format
-
-  <&grf_gpio 0 GPIO_ACTIVE_LOW>
-
-  The first cell is the pin number and
-  the second cell is used to specify the GPIO polarity
-    0 = Active high
-    1 = Active low
-
-maintainers:
-  - Heiko Stuebner <heiko@sntech.de>
-
-properties:
-  compatible:
-    const: rockchip,rk3328-grf-gpio
-
-  gpio-controller: true
-
-  "#gpio-cells":
-    const: 2
-
-required:
-  - compatible
-  - gpio-controller
-  - "#gpio-cells"
-
-additionalProperties: false
-
-examples:
-  - |
-    grf_gpio: gpio {
-      compatible = "rockchip,rk3328-grf-gpio";
-      gpio-controller;
-      #gpio-cells = <2>;
-    };
diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
index c2902aac2514..4bdc201b719e 100644
--- a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SiFive GPIO controller
 
 maintainers:
-  - Yash Shah <yash.shah@sifive.com>
   - Paul Walmsley <paul.walmsley@sifive.com>
 
 properties:
@@ -47,6 +46,10 @@ properties:
     maximum: 32
     default: 16
 
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
   gpio-controller: true
 
 required:
@@ -73,17 +76,18 @@ additionalProperties: false
 
 examples:
   - |
-      #include <dt-bindings/clock/sifive-fu540-prci.h>
-      gpio@10060000 {
+    #include <dt-bindings/clock/sifive-fu540-prci.h>
+    gpio@10060000 {
         compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
         interrupt-parent = <&plic>;
-        interrupts = <7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22>;
+        interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>,
+                     <17>, <18>, <19>, <20>, <21>, <22>;
         reg = <0x10060000 0x1000>;
-        clocks = <&tlclk PRCI_CLK_TLCLK>;
+        clocks = <&tlclk FU540_PRCI_CLK_TLCLK>;
         gpio-controller;
         #gpio-cells = <2>;
         interrupt-controller;
         #interrupt-cells = <2>;
-      };
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt b/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
deleted file mode 100644
index 1b30812b015b..000000000000
--- a/Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Synopsys GPIO via CREG (Control REGisters) driver
-
-Required properties:
-- compatible : "snps,creg-gpio-hsdk" or "snps,creg-gpio-axs10x".
-- reg : Exactly one register range with length 0x4.
-- #gpio-cells : Since the generic GPIO binding is used, the
-  amount of cells must be specified as 2. The first cell is the
-  pin number, the second cell is used to specify optional parameters:
-  See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
-- gpio-controller : Marks the device node as a GPIO controller.
-- ngpios: Number of GPIO pins.
-
-Example:
-
-gpio: gpio@f00014b0 {
-	compatible = "snps,creg-gpio-hsdk";
-	reg = <0xf00014b0 0x4>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	ngpios = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
index b391cc1b4590..bba6f5b6606f 100644
--- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
@@ -9,7 +9,7 @@ title: Synopsys DesignWare APB GPIO controller
 description: |
   Synopsys DesignWare GPIO controllers have a configurable number of ports,
   each of which are intended to be represented as child nodes with the generic
-  GPIO-controller properties as desribed in this bindings file.
+  GPIO-controller properties as described in this bindings file.
 
 maintainers:
   - Hoan Tran <hoan@os.amperecomputing.com>
@@ -61,6 +61,12 @@ patternProperties:
       '#gpio-cells':
         const: 2
 
+      gpio-line-names:
+        minItems: 1
+        maxItems: 32
+
+      gpio-ranges: true
+
       ngpios:
         default: 32
         minimum: 1
@@ -105,8 +111,8 @@ additionalProperties: false
 required:
   - compatible
   - reg
-  - "#address-cells"
-  - "#size-cells"
+  - '#address-cells'
+  - '#size-cells'
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
index bcafa494ed7a..36f5a0610471 100644
--- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
@@ -52,6 +52,12 @@ properties:
       <child-interrupt-base parent-interrupt-base length> triplets.
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
 
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+    required:
+      - gpio-hog
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml b/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml
new file mode 100644
index 000000000000..83e0b2d14c9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/spacemit,k1-gpio.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/spacemit,k1-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SpacemiT K1 GPIO controller
+
+maintainers:
+  - Yixun Lan <dlan@gentoo.org>
+
+description:
+  The controller's registers are organized as sets of eight 32-bit
+  registers with each set of port controlling 32 pins.  A single
+  interrupt line is shared for all of the pins by the controller.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    const: spacemit,k1-gpio
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: GPIO Core Clock
+      - description: GPIO Bus Clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: bus
+
+  resets:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 3
+    description:
+      The first two cells are the GPIO bank index and offset inside the bank,
+      the third cell should specify GPIO flag.
+
+  gpio-ranges: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description:
+      The first two cells are the GPIO bank index and offset inside the bank,
+      the third cell should specify interrupt flag. The controller does not
+      support level interrupts, so flags of IRQ_TYPE_LEVEL_HIGH,
+      IRQ_TYPE_LEVEL_LOW should not be used.
+      Refer <dt-bindings/interrupt-controller/irq.h> for valid flags.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@d4019000 {
+      compatible = "spacemit,k1-gpio";
+      reg = <0xd4019000 0x800>;
+      clocks = <&ccu 9>, <&ccu 61>;
+      clock-names = "core", "bus";
+      gpio-controller;
+      #gpio-cells = <3>;
+      interrupts = <58>;
+      interrupt-controller;
+      interrupt-parent = <&plic>;
+      #interrupt-cells = <3>;
+      gpio-ranges = <&pinctrl 0 0 0 32>,
+                    <&pinctrl 1 0 32 32>,
+                    <&pinctrl 2 0 64 32>,
+                    <&pinctrl 3 0 96 32>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/spear_spics.txt b/Documentation/devicetree/bindings/gpio/spear_spics.txt
deleted file mode 100644
index dd04d96e6ff1..000000000000
--- a/Documentation/devicetree/bindings/gpio/spear_spics.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-=== ST Microelectronics SPEAr SPI CS Driver ===
-
-SPEAr platform provides a provision to control chipselects of ARM PL022 Prime
-Cell spi controller through its system registers, which otherwise remains under
-PL022 control. If chipselect remain under PL022 control then they would be
-released as soon as transfer is over and TxFIFO becomes empty. This is not
-desired by some of the device protocols above spi which expect (multiple)
-transfers without releasing their chipselects.
-
-Chipselects can be controlled by software by turning them as GPIOs. SPEAr
-provides another interface through system registers through which software can
-directly control each PL022 chipselect. Hence, it is natural for SPEAr to export
-the control of this interface as gpio.
-
-Required properties:
-
-  * compatible: should be defined as "st,spear-spics-gpio"
-  * reg: mentioning address range of spics controller
-  * st-spics,peripcfg-reg: peripheral configuration register offset
-  * st-spics,sw-enable-bit: bit offset to enable sw control
-  * st-spics,cs-value-bit: bit offset to drive chipselect low or high
-  * st-spics,cs-enable-mask: chip select number bit mask
-  * st-spics,cs-enable-shift: chip select number program offset
-  * gpio-controller: Marks the device node as gpio controller
-  * #gpio-cells: should be 1 and will mention chip select number
-
-All the above bit offsets are within peripcfg register.
-
-Example:
--------
-spics: spics@e0700000{
-        compatible = "st,spear-spics-gpio";
-        reg = <0xe0700000 0x1000>;
-        st-spics,peripcfg-reg = <0x3b0>;
-        st-spics,sw-enable-bit = <12>;
-        st-spics,cs-value-bit = <11>;
-        st-spics,cs-enable-mask = <3>;
-        st-spics,cs-enable-shift = <8>;
-        gpio-controller;
-        #gpio-cells = <2>;
-};
-
-
-spi0: spi@e0100000 {
-        num-cs = <3>;
-        cs-gpios = <&gpio1 7 0>, <&spics 0>,
-                   <&spics 1>;
-	...
-}
diff --git a/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml b/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml
new file mode 100644
index 000000000000..99fcf970773a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sprd,gpio-eic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc EIC controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  The EIC is the abbreviation of external interrupt controller, which can
+  be used only in input mode. The Spreadtrum platform has 2 EIC controllers,
+  one is in digital chip, and another one is in PMIC. The digital chip EIC
+  controller contains 4 sub-modules, i.e. EIC-debounce, EIC-latch, EIC-async and
+  EIC-sync. But the PMIC EIC controller contains only one EIC-debounce sub-
+  module.
+
+  The EIC-debounce sub-module provides up to 8 source input signal
+  connections. A debounce mechanism is used to capture the input signals'
+  stable status (millisecond resolution) and a single-trigger mechanism
+  is introduced into this sub-module to enhance the input event detection
+  reliability. In addition, this sub-module's clock can be shut off
+  automatically to reduce power dissipation. Moreover the debounce range
+  is from 1ms to 4s with a step size of 1ms. The input signal will be
+  ignored if it is asserted for less than 1 ms.
+
+  The EIC-latch sub-module is used to latch some special power down signals
+  and generate interrupts, since the EIC-latch does not depend on the APB
+  clock to capture signals.
+
+  The EIC-async sub-module uses a 32kHz clock to capture the short signals
+  (microsecond resolution) to generate interrupts by level or edge trigger.
+
+  The EIC-sync is similar with GPIO's input function, which is a synchronized
+  signal input register. It can generate interrupts by level or edge trigger
+  when detecting input signals.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - sprd,sc9860-eic-debounce
+          - sprd,sc9860-eic-latch
+          - sprd,sc9860-eic-async
+          - sprd,sc9860-eic-sync
+          - sprd,sc2731-eic
+      - items:
+          - enum:
+              - sprd,ums512-eic-debounce
+          - const: sprd,sc9860-eic-debounce
+      - items:
+          - enum:
+              - sprd,ums512-eic-latch
+          - const: sprd,sc9860-eic-latch
+      - items:
+          - enum:
+              - sprd,ums512-eic-async
+          - const: sprd,sc9860-eic-async
+      - items:
+          - enum:
+              - sprd,ums512-eic-sync
+          - const: sprd,sc9860-eic-sync
+      - items:
+          - enum:
+              - sprd,sc2730-eic
+          - const: sprd,sc2731-eic
+
+  reg:
+    minItems: 1
+    maxItems: 3
+    description:
+      EIC controller can support maximum 3 banks which has its own
+      address base.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+    description:
+      The interrupt shared by all GPIO lines for this controller.
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        eic_debounce: gpio@40210000 {
+            compatible = "sprd,sc9860-eic-debounce";
+            reg = <0 0x40210000 0 0x80>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml b/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml
new file mode 100644
index 000000000000..483168838128
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sprd,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc GPIO controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  The controller's registers are organized as sets of sixteen 16-bit
+  registers with each set controlling a bank of up to 16 pins. A single
+  interrupt is shared for all of the banks handled by the controller.
+
+properties:
+  compatible:
+    oneOf:
+      - const: sprd,sc9860-gpio
+      - items:
+          - enum:
+              - sprd,ums512-gpio
+          - const: sprd,sc9860-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+    description: The interrupt shared by all GPIO lines for this controller.
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ap_gpio: gpio@40280000 {
+            compatible = "sprd,sc9860-gpio";
+            reg = <0 0x40280000 0 0x1000>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
new file mode 100644
index 000000000000..b3e8951959b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,nomadik-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nomadik GPIO controller
+
+description:
+  The Nomadik GPIO driver handles Nomadik SoC GPIO blocks. This block has also
+  been called ST STA2X11. On the Nomadik platform, this driver is intertwined
+  with pinctrl-nomadik.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - st,nomadik-gpio
+      - mobileye,eyeq5-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-bank:
+    description: System-wide GPIO bank index.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  st,supports-sleepmode:
+    description: Whether the controller can sleep or not.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  clocks:
+    maxItems: 1
+
+  gpio-ranges:
+    maxItems: 1
+
+  ngpios:
+    minimum: 0
+    maximum: 32
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - gpio-controller
+  - interrupt-controller
+  - gpio-bank
+
+unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mobileye,eyeq5-gpio
+    then:
+      properties:
+        st,supports-sleepmode: false
+
+examples:
+  - |
+    gpio@8012e080 {
+        compatible = "st,nomadik-gpio";
+        reg =  <0x8012e080 0x80>;
+        interrupts = <0 120 0x4>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+        st,supports-sleepmode;
+        gpio-bank = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/st,spear-spics-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,spear-spics-gpio.yaml
new file mode 100644
index 000000000000..3b0d2112da79
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/st,spear-spics-gpio.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,spear-spics-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST Microelectronics SPEAr SPI CS GPIO Controller
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+
+description: >
+  SPEAr platform provides a provision to control chipselects of ARM PL022 Prime
+  Cell spi controller through its system registers, which otherwise remains
+  under PL022 control. If chipselect remain under PL022 control then they would
+  be released as soon as transfer is over and TxFIFO becomes empty. This is not
+  desired by some of the device protocols above spi which expect (multiple)
+  transfers without releasing their chipselects.
+
+  Chipselects can be controlled by software by turning them as GPIOs. SPEAr
+  provides another interface through system registers through which software can
+  directly control each PL022 chipselect. Hence, it is natural for SPEAr to
+  export the control of this interface as gpio.
+
+properties:
+  compatible:
+    const: st,spear-spics-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  st-spics,peripcfg-reg:
+    description: Offset of the peripcfg register.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  st-spics,sw-enable-bit:
+    description: Bit offset to enable software chipselect control.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  st-spics,cs-value-bit:
+    description: Bit offset to drive chipselect low or high.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  st-spics,cs-enable-mask:
+    description: Bitmask selecting which chipselects to enable.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  st-spics,cs-enable-shift:
+    description: Bit shift for programming chipselect number.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - st-spics,peripcfg-reg
+  - st-spics,sw-enable-bit
+  - st-spics,cs-value-bit
+  - st-spics,cs-enable-mask
+  - st-spics,cs-enable-shift
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@e0700000 {
+        compatible = "st,spear-spics-gpio";
+        reg = <0xe0700000 0x1000>;
+        st-spics,peripcfg-reg = <0x3b0>;
+        st-spics,sw-enable-bit = <12>;
+        st-spics,cs-value-bit = <11>;
+        st-spics,cs-enable-mask = <3>;
+        st-spics,cs-enable-shift = <8>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
new file mode 100644
index 000000000000..4555f1644a4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/st,stmpe-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Port Expander (STMPE) GPIO Block
+
+description:
+  STMicroelectronics Port Expander (STMPE) is a series of slow
+  bus controllers for various expanded peripherals such as GPIO, keypad,
+  touchscreen, ADC, PWM or rotator. It can contain one or several different
+  peripherals connected to SPI or I2C. These bindings pertain to the
+  GPIO portions of these expanders.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    const: st,stmpe-gpio
+
+  "#gpio-cells":
+    const: 2
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 24
+
+  interrupt-controller: true
+
+  st,norequest-mask:
+    description:
+      A bitmask of GPIO lines that cannot be requested because for
+      for example not being connected to anything on the system
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - "#interrupt-cells"
+  - gpio-controller
+  - interrupt-controller
diff --git a/Documentation/devicetree/bindings/gpio/ti,keystone-dsp-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,keystone-dsp-gpio.yaml
new file mode 100644
index 000000000000..59f81621408b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/ti,keystone-dsp-gpio.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/ti,keystone-dsp-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keystone 2 DSP GPIO controller
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description: |
+  HOST OS userland running on ARM can send interrupts to DSP cores using
+  the DSP GPIO controller IP. It provides 28 IRQ signals per each DSP core.
+  This is one of the component used by the IPC mechanism used on Keystone SOCs.
+
+  For example TCI6638K2K SoC has 8 DSP GPIO controllers:
+   - 8 for C66x CorePacx CPUs 0-7
+
+  Keystone 2 DSP GPIO controller has specific features:
+  - each GPIO can be configured only as output pin;
+  - setting GPIO value to 1 causes IRQ generation on target DSP core;
+  - reading pin value returns 0 - if IRQ was handled or 1 - IRQ is still
+    pending.
+
+properties:
+  compatible:
+    const: ti,keystone-dsp-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio,syscon-dev:
+    description:
+      Phandle and offset of device's specific registers within the syscon state
+      control registers
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon
+          - description: register offset within state control registers
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio,syscon-dev
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@240 {
+        compatible = "ti,keystone-dsp-gpio";
+        reg = <0x240 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio,syscon-dev = <&devctrl 0x240>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
index 7087e4a5013f..7b75d2f92f1b 100644
--- a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/gpio/ti,omap-gpio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OMAP GPIO controller bindings
+title: OMAP GPIO controller
 
 maintainers:
   - Grygorii Strashko <grygorii.strashko@ti.com>
@@ -58,14 +58,14 @@ properties:
     deprecated: true
     description:
       Name of the hwmod associated with the GPIO. Needed on some legacy OMAP
-      SoCs which have not been converted to the ti,sysc interconnect hierarachy.
+      SoCs which have not been converted to the ti,sysc interconnect hierarchy.
 
   ti,no-reset-on-init:
     $ref: /schemas/types.yaml#/definitions/flag
     deprecated: true
     description:
       Do not reset on init. Used with ti,hwmods on some legacy OMAP SoCs which
-      have not been converted to the ti,sysc interconnect hierarachy.
+      have not been converted to the ti,sysc interconnect hierarchy.
 
 patternProperties:
   "^(.+-hog(-[0-9]+)?)$":
diff --git a/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml
new file mode 100644
index 000000000000..96d50d14c071
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/ti,twl4030-gpio.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/ti,twl4030-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TWL4030 GPIO controller
+
+maintainers:
+  - Aaro Koskinen <aaro.koskinen@iki.fi>
+  - Andreas Kemnade <andreas@kemnade.info>
+  - Kevin Hilman <khilman@baylibre.com>
+  - Roger Quadros <rogerq@kernel.org>
+  - Tony Lindgren <tony@atomide.com>
+
+properties:
+  compatible:
+    const: ti,twl4030-gpio
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  ti,debounce:
+    description: Debounce control bits. Each bit corresponds to a GPIO pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,mmc-cd:
+    description: MMC card detect control bits. Each bit corresponds to a GPIO pin for VMMC(n+1).
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,pullups:
+    description: Pull-up control bits. Each bit corresponds to a GPIO pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,pulldowns:
+    description: Pull-down control bits. Each bit corresponds to a GPIO pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,use-leds:
+    type: boolean
+    description: Enables LEDA and LEDB outputs if set
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio {
+        compatible = "ti,twl4030-gpio";
+        #gpio-cells = <2>;
+        gpio-controller;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        ti,use-leds;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
index 9ad470e01953..712063417bc8 100644
--- a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
+++ b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
@@ -43,28 +43,27 @@ required:
   - gpio-controller
   - interrupt-controller
   - "#interrupt-cells"
-  - interrupt-parent
 
 additionalProperties: false
 
 examples:
   - |
-      #include <dt-bindings/interrupt-controller/irq.h>
-      #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-      soc {
+    soc {
         #address-cells = <2>;
         #size-cells = <2>;
 
         gpio: gpio@28020000 {
-          compatible = "toshiba,gpio-tmpv7708";
-          reg = <0 0x28020000 0 0x1000>;
-          #gpio-cells = <0x2>;
-          gpio-ranges = <&pmux 0 0 32>;
-          gpio-controller;
-          interrupt-controller;
-          #interrupt-cells = <2>;
-          interrupt-parent = <&gic>;
+            compatible = "toshiba,gpio-tmpv7708";
+            reg = <0 0x28020000 0 0x1000>;
+            #gpio-cells = <0x2>;
+            gpio-ranges = <&pmux 0 0 32>;
+            gpio-controller;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&gic>;
         };
-      };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml
new file mode 100644
index 000000000000..3f4bbd57fc52
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/trivial-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trivial 2-cell GPIO controllers
+
+maintainers:
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - cirrus,ep7312-gpio
+          - const: cirrus,ep7209-gpio
+      - enum:
+          - apm,xgene-gpio
+          - cirrus,ep7209-gpio
+          - cznic,moxtet-gpio
+          - dlg,slg7xl45106
+          - fcs,fxl6408
+          - fsl,ls1046aqds-fpga-gpio-stat-pres2
+          - fsl,lx2160ardb-fpga-gpio-sfp
+          - gateworks,pld-gpio
+          - ibm,ppc4xx-gpio
+          - loongson,ls1x-gpio
+          - maxim,max77620
+          - nintendo,hollywood-gpio
+          - nxp,pca9570
+          - nxp,pca9571
+          - rockchip,rk3328-grf-gpio
+          - snps,creg-gpio-hsdk
+          - technologic,ts4800-gpio
+          - technologic,ts4900-gpio
+          - technologic,ts7970-gpio
+          - ti,741g125 # for 741G125 (1-bit Input),
+          - ti,741g174 # for 741G74 (1-bit Output),
+          - ti,742g125 # for 742G125 (2-bit Input),
+          - ti,7474    # for 7474 (2-bit Output),
+          - ti,74125   # for 74125 (4-bit Input),
+          - ti,74175   # for 74175 (4-bit Output),
+          - ti,74365   # for 74365 (6-bit Input),
+          - ti,74174   # for 74174 (6-bit Output),
+          - ti,74244   # for 74244 (8-bit Input),
+          - ti,74273   # for 74273 (8-bit Output),
+          - ti,741624  # for 741624 (16-bit Input),
+          - ti,7416374 # for 7416374 (16-bit Output).
+          - ti,lp3943-gpio
+          - ti,palmas-gpio
+          - ti,tpic2810
+          - ti,tps80036-gpio
+          - ti,tps65913-gpio
+          - ti,tps65914-gpio
+
+  reg:
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names: true
+
+  ngpios: true
+
+  # Don't add more properties
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    type: object
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - '#gpio-cells'
+  - gpio-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max77620
+              - rockchip,rk3328-grf-gpio
+              - ti,lp3943-gpio
+              - ti,palmas-gpio
+              - ti,tps80036-gpio
+              - ti,tps65913-gpio
+              - ti,tps65914-gpio
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@1701c000 {
+        compatible = "apm,xgene-gpio";
+        reg = <0x1701c000 0x40>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt b/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt
deleted file mode 100644
index 038c3a6a1f4d..000000000000
--- a/Documentation/devicetree/bindings/gpio/wd,mbl-gpio.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Bindings for the Western Digital's MyBook Live memory-mapped GPIO controllers.
-
-The Western Digital MyBook Live has two memory-mapped GPIO controllers.
-Both GPIO controller only have a single 8-bit data register, where GPIO
-state can be read and/or written.
-
-Required properties:
-	- compatible: should be "wd,mbl-gpio"
-	- reg-names: must contain
-		"dat" - data register
-	- reg: address + size pairs describing the GPIO register sets;
-		order must correspond with the order of entries in reg-names
-	- #gpio-cells: must be set to 2. The first cell is the pin number and
-			the second cell is used to specify the gpio polarity:
-			0 = active high
-			1 = active low
-	- gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
-	- no-output: GPIOs are read-only.
-
-Examples:
-	gpio0: gpio0@e0000000 {
-		compatible = "wd,mbl-gpio";
-		reg-names = "dat";
-		reg = <0xe0000000 0x1>;
-		#gpio-cells = <2>;
-		gpio-controller;
-	};
-
-	gpio1: gpio1@e0100000 {
-		compatible = "wd,mbl-gpio";
-		reg-names = "dat";
-		reg = <0xe0100000 0x1>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		no-output;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
index 0f628b088cec..5eeb29bcdd21 100644
--- a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: X-Powers AXP209 GPIO Device Tree Bindings
+title: X-Powers AXP209 GPIO
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -19,8 +19,14 @@ properties:
     oneOf:
       - enum:
           - x-powers,axp209-gpio
+          - x-powers,axp221-gpio
           - x-powers,axp813-gpio
       - items:
+          - enum:
+              - x-powers,axp223-gpio
+              - x-powers,axp809-gpio
+          - const: x-powers,axp221-gpio
+      - items:
           - const: x-powers,axp803-gpio
           - const: x-powers,axp813-gpio
 
@@ -29,6 +35,7 @@ properties:
 patternProperties:
   "^.*-pins?$":
     $ref: /schemas/pinctrl/pinmux-node.yaml#
+    additionalProperties: false
 
     properties:
       pins:
@@ -37,6 +44,7 @@ patternProperties:
             - GPIO0
             - GPIO1
             - GPIO2
+            - GPIO3
 
       function:
         enum:
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
new file mode 100644
index 000000000000..7af4eb2d1858
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/xlnx,gpio-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI GPIO controller
+
+maintainers:
+  - Neeli Srinivas <srinivas.neeli@amd.com>
+
+description:
+  The AXI GPIO design provides a general purpose input/output interface
+  to an AXI4-Lite interface. The AXI GPIO can be configured as either
+  a single or a dual-channel device. The width of each channel is
+  independently configurable. The channels can be configured to
+  generate an interrupt when a transition on any of their inputs occurs.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,xps-gpio-1.00.a
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-line-names:
+    description: strings describing the names of each gpio line
+    minItems: 1
+    maxItems: 64
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  interrupt-names: true
+
+  xlnx,all-inputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel1 bits in input mode.
+
+  xlnx,all-inputs-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel2 bits in input mode.
+
+  xlnx,all-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel1 bits in output mode.
+
+  xlnx,all-outputs-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel2 bits in output mode.
+
+  xlnx,dout-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets the default value of all the enabled bits of
+                 channel1.
+    default: 0
+
+  xlnx,dout-default-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets the default value of all the enabled bits of
+                 channel2.
+    default: 0
+
+  xlnx,gpio-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The value defines the bit width of the GPIO channel1.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  xlnx,gpio2-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The value defines the bit width of the GPIO channel2.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  xlnx,interrupt-present:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter enables interrupt control logic
+                 and interrupt registers in GPIO module.
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  xlnx,is-dual:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter enables a second GPIO channel (GPIO2).
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  xlnx,tri-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This value configures the input or output mode
+                 of each bit of GPIO channel1.
+
+  xlnx,tri-default-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This value configures the input or output mode
+                 of each bit of GPIO channel2.
+
+required:
+  - reg
+  - compatible
+  - clocks
+  - gpio-controller
+  - "#gpio-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio@a0020000 {
+        compatible = "xlnx,xps-gpio-1.00.a";
+        reg = <0xa0020000 0x10000>;
+        #gpio-cells = <2>;
+        #interrupt-cells = <0x2>;
+        clocks = <&zynqmp_clk 71>;
+        gpio-controller;
+        interrupt-controller;
+        interrupt-names = "ip2intc_irpt";
+        interrupt-parent = <&gic>;
+        interrupts = <0 89 4>;
+        xlnx,all-inputs = <0x0>;
+        xlnx,all-inputs-2 = <0x0>;
+        xlnx,all-outputs = <0x0>;
+        xlnx,all-outputs-2 = <0x0>;
+        xlnx,dout-default = <0x0>;
+        xlnx,dout-default-2 = <0x0>;
+        xlnx,gpio-width = <0x20>;
+        xlnx,gpio2-width = <0x20>;
+        xlnx,interrupt-present = <0x1>;
+        xlnx,is-dual = <0x1>;
+        xlnx,tri-default = <0xFFFFFFFF>;
+        xlnx,tri-default-2 = <0xFFFFFFFF>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
index 31c0fc345903..e13e9d6dd148 100644
--- a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
+++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ZynqMP Mode Pin GPIO controller
 
@@ -12,7 +12,7 @@ description:
   PS_MODE). Every pin can be configured as input/output.
 
 maintainers:
-  - Piyush Mehta <piyush.mehta@xilinx.com>
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
 
 properties:
   compatible:
@@ -23,6 +23,8 @@ properties:
   "#gpio-cells":
     const: 2
 
+  label: true
+
 required:
   - compatible
   - gpio-controller
@@ -37,6 +39,7 @@ examples:
             compatible = "xlnx,zynqmp-gpio-modepin";
             gpio-controller;
             #gpio-cells = <2>;
+            label = "modepin";
         };
     };
 
diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
index a36aec27069c..59c79a6943ec 100644
--- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Bootlin
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/gpio/xylon,logicvc-gpio.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/gpio/xylon,logicvc-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Xylon LogiCVC GPIO controller
 
diff --git a/Documentation/devicetree/bindings/gpu/apple,agx.yaml b/Documentation/devicetree/bindings/gpu/apple,agx.yaml
new file mode 100644
index 000000000000..05af942ad174
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/apple,agx.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/apple,agx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC GPU
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - apple,agx-g13g
+          - apple,agx-g13s
+          - apple,agx-g14g
+          - apple,agx-g14s
+      - items:
+          - enum:
+              - apple,agx-g13c
+              - apple,agx-g13d
+          - const: apple,agx-g13s
+      - items:
+          - enum:
+              - apple,agx-g14c
+              - apple,agx-g14d
+          - const: apple,agx-g14s
+
+  reg:
+    items:
+      - description: GPU coprocessor control registers
+      - description: GPU block MMIO registers
+
+  reg-names:
+    items:
+      - const: asc
+      - const: sgx
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    maxItems: 1
+
+  memory-region:
+    items:
+      - description: Region containing GPU MMU TTBs
+      - description: Region containing GPU MMU page tables
+      - description:
+          Region containing a shared handoff structure for VM
+          management coordination
+      - description: Calibration blob. Mostly power-related configuration
+      - description: Calibration blob. Mostly GPU-related configuration
+      - description: Shared global variables with GPU firmware
+
+  memory-region-names:
+    items:
+      - const: ttbs
+      - const: pagetables
+      - const: handoff
+      - const: hw-cal-a
+      - const: hw-cal-b
+      - const: globals
+
+  apple,firmware-abi:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    description:
+      macOS version the current firmware is paired with, used to pick
+      the version of firmware ABI to be used.
+      Bootloader will overwrite this
+
+required:
+  - compatible
+  - reg
+  - mboxes
+  - memory-region
+  - apple,firmware-abi
+
+additionalProperties: false
+
+examples:
+  - |
+    gpu@6400000 {
+        compatible = "apple,agx-g13g";
+        reg = <0x6400000 0x40000>,
+              <0x4000000 0x1000000>;
+        reg-names = "asc", "sgx";
+        mboxes = <&agx_mbox>;
+        power-domains = <&ps_gfx>;
+        memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+                        <&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+        memory-region-names = "ttbs", "pagetables", "handoff",
+                              "hw-cal-a", "hw-cal-b", "globals";
+
+        apple,firmware-abi = <0 0 0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 6f98dd55fb4c..db49b8ff8c74 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -14,32 +14,63 @@ properties:
     pattern: '^gpu@[a-f0-9]+$'
 
   compatible:
-    items:
-      - enum:
-          - amlogic,meson-g12a-mali
-          - mediatek,mt8183-mali
-          - realtek,rtd1619-mali
-          - rockchip,px30-mali
-          - rockchip,rk3568-mali
-      - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+    oneOf:
+      - items:
+          - enum:
+              - allwinner,sun50i-h616-mali
+              - amlogic,meson-g12a-mali
+              - mediatek,mt8183-mali
+              - mediatek,mt8183b-mali
+              - mediatek,mt8186-mali
+              - mediatek,mt8365-mali
+              - realtek,rtd1619-mali
+              - renesas,r9a07g044-mali
+              - renesas,r9a07g054-mali
+              - renesas,r9a09g047-mali
+              - renesas,r9a09g056-mali
+              - renesas,r9a09g057-mali
+              - rockchip,px30-mali
+              - rockchip,rk3562-mali
+              - rockchip,rk3568-mali
+              - rockchip,rk3576-mali
+          - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+      - items:
+          - enum:
+              - mediatek,mt8195-mali
+          - const: mediatek,mt8192-mali
+          - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
+      - items:
+          - enum:
+              - allwinner,sun55i-a523-mali
+              - mediatek,mt8188-mali
+              - mediatek,mt8192-mali
+              - mediatek,mt8370-mali
+          - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
 
   reg:
     maxItems: 1
 
   interrupts:
+    minItems: 3
     items:
       - description: Job interrupt
       - description: MMU interrupt
       - description: GPU interrupt
+      - description: Event interrupt
 
   interrupt-names:
+    minItems: 3
     items:
       - const: job
       - const: mmu
       - const: gpu
+      - const: event
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  clock-names: true
 
   mali-supply: true
 
@@ -49,16 +80,23 @@ properties:
 
   power-domains:
     minItems: 1
-    maxItems: 3
+    maxItems: 5
+
+  power-domain-names:
+    minItems: 2
+    maxItems: 5
 
   resets:
-    maxItems: 2
+    minItems: 1
+    maxItems: 3
+
+  reset-names: true
 
   "#cooling-cells":
     const: 2
 
   dynamic-power-coefficient:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       A u32 value that represents the running time dynamic
       power coefficient in units of uW/MHz/V^2. The
@@ -76,6 +114,13 @@ properties:
 
   dma-coherent: true
 
+  nvmem-cell-names:
+    items:
+      - const: speed-bin
+
+  nvmem-cells:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -92,8 +137,50 @@ allOf:
           contains:
             const: amlogic,meson-g12a-mali
     then:
+      properties:
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+      required:
+        - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g044-mali
+              - renesas,r9a07g054-mali
+              - renesas,r9a09g047-mali
+              - renesas,r9a09g056-mali
+              - renesas,r9a09g057-mali
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+        interrupt-names:
+          minItems: 4
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: gpu
+            - const: bus
+            - const: bus_ace
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: rst
+            - const: axi_rst
+            - const: ace_rst
       required:
+        - clock-names
+        - power-domains
         - resets
+        - reset-names
   - if:
       properties:
         compatible:
@@ -103,6 +190,7 @@ allOf:
       properties:
         power-domains:
           minItems: 3
+          maxItems: 3
         power-domain-names:
           items:
             - const: core0
@@ -115,9 +203,83 @@ allOf:
         - power-domain-names
     else:
       properties:
+        sram-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8183b-mali
+              - mediatek,mt8188-mali
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+          maxItems: 3
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+      required:
+        - power-domains
+        - power-domain-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8186-mali
+              - mediatek,mt8370-mali
+    then:
+      properties:
+        power-domains:
+          minItems: 2
+          maxItems: 2
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+      required:
+        - power-domains
+        - power-domain-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8192-mali
+    then:
+      properties:
+        power-domains:
+          minItems: 5
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+            - const: core3
+            - const: core4
+      required:
+        - power-domains
+        - power-domain-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-mali
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: gpu
+            - const: bus
         power-domains:
           maxItems: 1
-        sram-supply: false
+        power-domain-names: false
+      required:
+        - clock-names
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index d209f272625d..a7192622e120 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -42,11 +42,21 @@ properties:
           - const: arm,mali-t760
       - items:
           - enum:
+              - samsung,exynos7-mali
+          - const: samsung,exynos5433-mali
+          - const: arm,mali-t760
+      - items:
+          - enum:
+              - samsung,exynos7870-mali
+          - const: arm,mali-t830
+      - items:
+          - enum:
               - rockchip,rk3399-mali
           - const: arm,mali-t860
-
-          # "arm,mali-t830"
-          # "arm,mali-t880"
+      - items:
+          - enum:
+              - samsung,exynos8890-mali
+          - const: arm,mali-t880
 
   reg:
     maxItems: 1
@@ -74,7 +84,8 @@ properties:
       - const: bus
 
   mali-supply: true
-  opp-table: true
+  opp-table:
+    type: object
 
   power-domains:
     maxItems: 1
@@ -91,7 +102,7 @@ properties:
   dma-coherent: true
 
   dynamic-power-coefficient:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       A u32 value that represents the running time dynamic
       power coefficient in units of uW/MHz/V^2. The
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index eceaa176bd57..c8d0d9192d92 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -29,10 +29,13 @@ properties:
               - allwinner,sun50i-a64-mali
               - rockchip,rk3036-mali
               - rockchip,rk3066-mali
+              - rockchip,rk3128-mali
               - rockchip,rk3188-mali
               - rockchip,rk3228-mali
               - samsung,exynos4210-mali
+              - st,stih410-mali
               - stericsson,db8500-mali
+              - xlnx,zynqmp-mali
           - const: arm,mali-400
       - items:
           - enum:
@@ -44,6 +47,7 @@ properties:
               - hisilicon,hi6220-mali
               - mediatek,mt7623-mali
               - rockchip,rk3328-mali
+              - rockchip,rk3528-mali
           - const: arm,mali-450
 
       # "arm,mali-300"
@@ -101,7 +105,8 @@ properties:
 
   mali-supply: true
 
-  opp-table: true
+  opp-table:
+    type: object
 
   power-domains:
     maxItems: 1
@@ -144,6 +149,7 @@ allOf:
               - rockchip,rk3188-mali
               - rockchip,rk3228-mali
               - rockchip,rk3328-mali
+              - rockchip,rk3528-mali
     then:
       required:
         - resets
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml
new file mode 100644
index 000000000000..bee9faf1d3f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-valhall-csf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Valhall GPU
+
+maintainers:
+  - Liviu Dudau <liviu.dudau@arm.com>
+  - Boris Brezillon <boris.brezillon@collabora.com>
+
+properties:
+  $nodename:
+    pattern: '^gpu@[a-f0-9]+$'
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8196-mali
+              - nxp,imx95-mali            # G310
+              - rockchip,rk3588-mali
+          - const: arm,mali-valhall-csf   # Mali Valhall GPU model/revision is fully discoverable
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Job interrupt
+      - description: MMU interrupt
+      - description: GPU interrupt
+
+  interrupt-names:
+    items:
+      - const: job
+      - const: mmu
+      - const: gpu
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - enum:
+          - coregroup
+          - stacks
+      - const: stacks
+
+  mali-supply: true
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  power-domains:
+    minItems: 1
+    maxItems: 5
+
+  power-domain-names:
+    minItems: 1
+    maxItems: 5
+
+  sram-supply: true
+
+  "#cooling-cells":
+    const: 2
+
+  dynamic-power-coefficient:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      A u32 value that represents the running time dynamic
+      power coefficient in units of uW/MHz/V^2. The
+      coefficient can either be calculated from power
+      measurements or derived by analysis.
+
+      The dynamic power consumption of the GPU is
+      proportional to the square of the Voltage (V) and
+      the clock frequency (f). The coefficient is used to
+      calculate the dynamic power as below -
+
+      Pdyn = dynamic-power-coefficient * V^2 * f
+
+      where voltage is in V, frequency is in MHz.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3588-mali
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+      required:
+        - mali-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8196-mali
+    then:
+      properties:
+        mali-supply: false
+        sram-supply: false
+        operating-points-v2: false
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: core
+            - const: stacks
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3588-power.h>
+
+    gpu: gpu@fb000000 {
+        compatible = "rockchip,rk3588-mali", "arm,mali-valhall-csf";
+        reg = <0xfb000000 0x200000>;
+        interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "job", "mmu", "gpu";
+        clock-names = "core", "coregroup", "stacks";
+        clocks = <&cru CLK_GPU>, <&cru CLK_GPU_COREGROUP>,
+                 <&cru CLK_GPU_STACKS>;
+        power-domains = <&power RK3588_PD_GPU>;
+        operating-points-v2 = <&gpu_opp_table>;
+        mali-supply = <&vdd_gpu_s0>;
+        sram-supply = <&vdd_gpu_mem_s0>;
+
+        gpu_opp_table: opp-table {
+            compatible = "operating-points-v2";
+            opp-300000000 {
+                opp-hz = /bits/ 64 <300000000>;
+                opp-microvolt = <675000 675000 850000>;
+            };
+            opp-400000000 {
+                opp-hz = /bits/ 64 <400000000>;
+                opp-microvolt = <675000 675000 850000>;
+            };
+        };
+    };
+  - |
+    gpu@48000000 {
+        compatible = "mediatek,mt8196-mali", "arm,mali-valhall-csf";
+        reg = <0x48000000 0x480000>;
+        clocks = <&gpufreq 0>, <&gpufreq 1>;
+        clock-names = "core", "stacks";
+        interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH 0>,
+                     <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH 0>;
+        interrupt-names = "job", "mmu", "gpu";
+        power-domains = <&gpufreq>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/aspeed,ast2400-gfx.yaml b/Documentation/devicetree/bindings/gpu/aspeed,ast2400-gfx.yaml
new file mode 100644
index 000000000000..20a4e00086ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/aspeed,ast2400-gfx.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/aspeed,ast2400-gfx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED GFX Display Controller
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-gfx
+          - aspeed,ast2500-gfx
+          - aspeed,ast2600-gfx
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+    description:
+      a reserved-memory region to use for the framebuffer.
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to SCU
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+
+    display@1e6e6000 {
+        compatible = "aspeed,ast2500-gfx", "syscon";
+        reg = <0x1e6e6000 0x1000>;
+        clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+        resets = <&syscon ASPEED_RESET_CRT1>;
+        interrupts = <0x19>;
+        memory-region = <&gfx_memory>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt b/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
deleted file mode 100644
index 958bdf962339..000000000000
--- a/Documentation/devicetree/bindings/gpu/aspeed-gfx.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Device tree configuration for the GFX display device on the ASPEED SoCs
-
-Required properties:
-  - compatible
-    * Must be one of the following:
-      + aspeed,ast2500-gfx
-      + aspeed,ast2400-gfx
-    * In addition, the ASPEED pinctrl bindings require the 'syscon' property to
-      be present
-
-  - reg: Physical base address and length of the GFX registers
-
-  - interrupts: interrupt number for the GFX device
-
-  - clocks: clock number used to generate the pixel clock
-
-  - resets: reset line that must be released to use the GFX device
-
-  - memory-region:
-    Phandle to a memory region to allocate from, as defined in
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-
-
-Example:
-
-gfx: display@1e6e6000 {
-	compatible = "aspeed,ast2500-gfx", "syscon";
-	reg = <0x1e6e6000 0x1000>;
-	reg-io-width = <4>;
-	clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
-	resets = <&syscon ASPEED_RESET_CRT1>;
-	interrupts = <0x19>;
-	memory-region = <&gfx_memory>;
-};
-
-gfx_memory: framebuffer {
-	size = <0x01000000>;
-	alignment = <0x01000000>;
-	compatible = "shared-dma-pool";
-	reusable;
-};
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
index e6485f7b046f..43c6d2d72456 100644
--- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/gpu/brcm,bcm-v3d.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom V3D GPU Bindings
+title: Broadcom V3D GPU
 
 maintainers:
-  - Eric Anholt <eric@anholt.net>
+  - Maíra Canal <mcanal@igalia.com>
   - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
 
 properties:
@@ -16,24 +16,18 @@ properties:
 
   compatible:
     enum:
+      - brcm,2711-v3d
+      - brcm,2712-v3d
       - brcm,7268-v3d
       - brcm,7278-v3d
 
   reg:
-    items:
-      - description: hub register (required)
-      - description: core0 register (required)
-      - description: GCA cache controller register (if GCA controller present)
-      - description: bridge register (if no external reset controller)
     minItems: 2
+    maxItems: 4
 
   reg-names:
-    items:
-      - const: hub
-      - const: core0
-      - enum: [ bridge, gca ]
-      - enum: [ bridge, gca ]
     minItems: 2
+    maxItems: 4
 
   interrupts:
     items:
@@ -56,6 +50,76 @@ required:
   - reg-names
   - interrupts
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,2711-v3d
+    then:
+      properties:
+        reg:
+          items:
+            - description: hub register
+            - description: core0 register
+        reg-names:
+          items:
+            - const: hub
+            - const: core0
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,2712-v3d
+    then:
+      properties:
+        reg:
+          items:
+            - description: hub register
+            - description: core0 register
+            - description: SMS state manager register
+        reg-names:
+          items:
+            - const: hub
+            - const: core0
+            - const: sms
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,7268-v3d
+    then:
+      properties:
+        reg:
+          items:
+            - description: hub register
+            - description: core0 register
+            - description: GCA cache controller register
+            - description: bridge register
+        reg-names:
+          items:
+            - const: hub
+            - const: core0
+            - const: gca
+            - const: bridge
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,7278-v3d
+    then:
+      properties:
+        reg:
+          items:
+            - description: hub register
+            - description: core0 register
+            - description: bridge register
+        reg-names:
+          items:
+            - const: hub
+            - const: core0
+            - const: bridge
+
 additionalProperties: false
 
 examples:
@@ -64,9 +128,9 @@ examples:
       compatible = "brcm,7268-v3d";
       reg = <0xf1200000 0x4000>,
             <0xf1208000 0x4000>,
-            <0xf1204000 0x100>,
-            <0xf1204100 0x100>;
-      reg-names = "hub", "core0", "bridge", "gca";
+            <0xf1204100 0x100>,
+            <0xf1204000 0x100>;
+      reg-names = "hub", "core0", "gca", "bridge";
       interrupts = <0 78 4>,
                    <0 77 4>;
     };
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
index 3cf862976448..ba4c6473ff92 100644
--- a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device tree binding for NVIDIA Tegra NVDEC
+title: NVIDIA Tegra NVDEC
 
 description: |
   NVDEC is the hardware video decoder present on NVIDIA Tegra210
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
new file mode 100644
index 000000000000..c23dae713eb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvenc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra NVENC
+
+description: |
+  NVENC is the hardware video encoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvenc@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvenc
+      - nvidia,tegra186-nvenc
+      - nvidia,tegra194-nvenc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvenc
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    maxItems: 3
+
+  nvidia,host1x-class:
+    description: |
+      Host1x class of the engine, used to specify the targeted engine
+      when programming the engine through Host1x channels or when
+      configuring engine-specific behavior in Host1x.
+    default: 0x21
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra210-nvenc
+            - nvidia,tegra186-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: write
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra194-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA read 2 memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: read-1
+            - const: write
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvenc@154c0000 {
+            compatible = "nvidia,tegra186-nvenc";
+            reg = <0x154c0000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVENC>;
+            clock-names = "nvenc";
+            resets = <&bpmp TEGRA186_RESET_NVENC>;
+            reset-names = "nvenc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_MPE>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVENCSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVENCSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu TEGRA186_SID_NVENC>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
new file mode 100644
index 000000000000..99a33a5eac3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvjpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra NVJPG
+
+description: |
+  NVJPG is the hardware JPEG decoder and encoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically programmed
+  through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvjpg@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvjpg
+      - nvidia,tegra186-nvjpg
+      - nvidia,tegra194-nvjpg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvjpg
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvjpg
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvjpg@15380000 {
+            compatible = "nvidia,tegra186-nvjpg";
+            reg = <0x15380000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVJPG>;
+            clock-names = "nvjpg";
+            resets = <&bpmp TEGRA186_RESET_NVJPG>;
+            reset-names = "nvjpg";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVJPG>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVJPGSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVJPGSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu TEGRA186_SID_NVJPG>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml
new file mode 100644
index 000000000000..0b7561c8b9bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra234-nvdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 NVDEC
+
+description: |
+  NVDEC is the hardware video decoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvdec@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra234-nvdec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: nvdec
+      - const: fuse
+      - const: tsec_pka
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the memory controller for determining information for the NVDEC
+      firmware secure carveout. This carveout is configured by the bootloader and
+      not accessible to CPU.
+
+  nvidia,bl-manifest-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader manifest from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,bl-code-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader code section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,bl-data-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader data section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-manifest-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system manifest from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-code-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system code section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-data-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system data section from beginning of firmware that was configured
+      by the bootloader.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - nvidia,memory-controller
+  - nvidia,bl-manifest-offset
+  - nvidia,bl-code-offset
+  - nvidia,bl-data-offset
+  - nvidia,os-manifest-offset
+  - nvidia,os-code-offset
+  - nvidia,os-data-offset
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    nvdec@15480000 {
+            compatible = "nvidia,tegra234-nvdec";
+            reg = <0x15480000 0x00040000>;
+            clocks = <&bpmp TEGRA234_CLK_NVDEC>,
+                     <&bpmp TEGRA234_CLK_FUSE>,
+                     <&bpmp TEGRA234_CLK_TSEC_PKA>;
+            clock-names = "nvdec", "fuse", "tsec_pka";
+            resets = <&bpmp TEGRA234_RESET_NVDEC>;
+            reset-names = "nvdec";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>;
+            interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>,
+                            <&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>;
+            dma-coherent;
+
+            nvidia,memory-controller = <&mc>;
+
+            /* Placeholder values, to be replaced with values from overlay */
+            nvidia,bl-manifest-offset = <0>;
+            nvidia,bl-data-offset = <0>;
+            nvidia,bl-code-offset = <0>;
+            nvidia,os-manifest-offset = <0>;
+            nvidia,os-data-offset = <0>;
+            nvidia,os-code-offset = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
new file mode 100644
index 000000000000..225a6e1b7fcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Imagination Technologies Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/img,powervr-rogue.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies PowerVR and IMG Rogue GPUs
+
+maintainers:
+  - Frank Binns <frank.binns@imgtec.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a7796-gpu
+              - renesas,r8a77961-gpu
+          - const: img,img-gx6250
+          - const: img,img-rogue
+      - items:
+          - const: renesas,r8a77965-gpu
+          - const: img,img-ge7800
+          - const: img,img-rogue
+      - items:
+          - enum:
+              - ti,am62-gpu
+          - const: img,img-axe-1-16m
+          # This deprecated element must be kept around to allow old kernels to
+          # work with newer dts.
+          - const: img,img-axe
+          - const: img,img-rogue
+      - items:
+          - enum:
+              - thead,th1520-gpu
+          - const: img,img-bxm-4-64
+          - const: img,img-rogue
+      - items:
+          - enum:
+              - ti,j721s2-gpu
+          - const: img,img-bxs-4-64
+          - const: img,img-rogue
+
+      # This legacy combination of compatible strings was introduced early on
+      # before the more specific GPU identifiers were used.
+      - items:
+          - enum:
+              - ti,am62-gpu
+          - const: img,img-axe
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: core
+      - const: mem
+      - const: sys
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    minItems: 1
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: a
+      - const: b
+    minItems: 1
+
+  dma-coherent: true
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,am62-gpu
+              - ti,j721s2-gpu
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - img,img-ge7800
+              - img,img-gx6250
+              - thead,th1520-gpu
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: img,img-axe-1-16m
+    then:
+      properties:
+        power-domains:
+          maxItems: 1
+        power-domain-names:
+          maxItems: 1
+      required:
+        - power-domains
+        - power-domain-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - img,img-bxs-4-64
+              - img,img-ge7800
+              - img,img-gx6250
+    then:
+      properties:
+        power-domains:
+          minItems: 2
+        power-domain-names:
+          minItems: 2
+      required:
+        - power-domains
+        - power-domain-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: thead,th1520-gpu
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: The single, unified power domain for the GPU on the
+                TH1520 SoC, integrating all internal IP power domains.
+        power-domain-names: false
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    gpu@fd00000 {
+        compatible = "ti,am62-gpu", "img,img-axe-1-16m", "img,img-axe",
+                     "img,img-rogue";
+        reg = <0x0fd00000 0x20000>;
+        clocks = <&k3_clks 187 0>;
+        clock-names = "core";
+        interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+        power-domain-names = "a";
+    };
diff --git a/Documentation/devicetree/bindings/gpu/img,powervr-sgx.yaml b/Documentation/devicetree/bindings/gpu/img,powervr-sgx.yaml
new file mode 100644
index 000000000000..f5898b04381c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/img,powervr-sgx.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Imagination Technologies Ltd.
+# Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/img,powervr-sgx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination Technologies PowerVR SGX GPUs
+
+maintainers:
+  - Frank Binns <frank.binns@imgtec.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,omap3430-gpu # Rev 121
+              - ti,omap3630-gpu # Rev 125
+          - const: img,powervr-sgx530
+      - items:
+          - enum:
+              - ingenic,jz4780-gpu # Rev 130
+              - ti,omap4430-gpu # Rev 120
+          - const: img,powervr-sgx540
+      - items:
+          - enum:
+              - allwinner,sun6i-a31-gpu # MP2 Rev 115
+              - ti,omap4470-gpu # MP1 Rev 112
+              - ti,omap5432-gpu # MP2 Rev 105
+              - ti,am5728-gpu # MP2 Rev 116
+              - ti,am6548-gpu # MP1 Rev 117
+          - const: img,powervr-sgx544
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: mem
+      - const: sys
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am6548-gpu
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun6i-a31-gpu
+              - ingenic,jz4780-gpu
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clocks: false
+        clock-names: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun6i-a31-gpu
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          minItems: 2
+          maxItems: 2
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ingenic,jz4780-gpu
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    gpu@7000000 {
+        compatible = "ti,am6548-gpu", "img,powervr-sgx544";
+        reg = <0x7000000 0x10000>;
+        interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&k3_pds 65 TI_SCI_PD_EXCLUSIVE>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu: gpu@1c40000 {
+        compatible = "allwinner,sun6i-a31-gpu", "img,powervr-sgx544";
+        reg = <0x01c40000 0x10000>;
+        interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu 1>, <&ccu 2>;
+        clock-names = "core", "mem";
+    };
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
deleted file mode 100644
index cc6ce5221a38..000000000000
--- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
+++ /dev/null
@@ -1,115 +0,0 @@
-NVIDIA Tegra Graphics Processing Units
-
-Required properties:
-- compatible: "nvidia,<gpu>"
-  Currently recognized values:
-  - nvidia,gk20a
-  - nvidia,gm20b
-  - nvidia,gp10b
-  - nvidia,gv11b
-- reg: Physical base address and length of the controller's registers.
-  Must contain two entries:
-  - first entry for bar0
-  - second entry for bar1
-- interrupts: Must contain an entry for each entry in interrupt-names.
-  See ../interrupt-controller/interrupts.txt for details.
-- interrupt-names: Must include the following entries:
-  - stall
-  - nonstall
-- vdd-supply: regulator for supply voltage. Only required for GPUs not using
-  power domains.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - gpu
-  - pwr
-If the compatible string is "nvidia,gm20b", then the following clock
-is also required:
-  - ref
-If the compatible string is "nvidia,gv11b", then the following clock is also
-required:
-  - fuse
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - gpu
-- power-domains: GPUs that make use of power domains can define this property
-  instead of vdd-supply. Currently "nvidia,gp10b" makes use of this.
-
-Optional properties:
-- iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details.
-
-Example for GK20A:
-
-	gpu@57000000 {
-		compatible = "nvidia,gk20a";
-		reg = <0x0 0x57000000 0x0 0x01000000>,
-		      <0x0 0x58000000 0x0 0x01000000>;
-		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "stall", "nonstall";
-		vdd-supply = <&vdd_gpu>;
-		clocks = <&tegra_car TEGRA124_CLK_GPU>,
-			 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
-		clock-names = "gpu", "pwr";
-		resets = <&tegra_car 184>;
-		reset-names = "gpu";
-		iommus = <&mc TEGRA_SWGROUP_GPU>;
-	};
-
-Example for GM20B:
-
-	gpu@57000000 {
-		compatible = "nvidia,gm20b";
-		reg = <0x0 0x57000000 0x0 0x01000000>,
-		      <0x0 0x58000000 0x0 0x01000000>;
-		interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "stall", "nonstall";
-		clocks = <&tegra_car TEGRA210_CLK_GPU>,
-			 <&tegra_car TEGRA210_CLK_PLL_P_OUT5>,
-			 <&tegra_car TEGRA210_CLK_PLL_G_REF>;
-		clock-names = "gpu", "pwr", "ref";
-		resets = <&tegra_car 184>;
-		reset-names = "gpu";
-		iommus = <&mc TEGRA_SWGROUP_GPU>;
-	};
-
-Example for GP10B:
-
-	gpu@17000000 {
-		compatible = "nvidia,gp10b";
-		reg = <0x0 0x17000000 0x0 0x1000000>,
-		      <0x0 0x18000000 0x0 0x1000000>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "stall", "nonstall";
-		clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
-			 <&bpmp TEGRA186_CLK_GPU>;
-		clock-names = "gpu", "pwr";
-		resets = <&bpmp TEGRA186_RESET_GPU>;
-		reset-names = "gpu";
-		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
-		iommus = <&smmu TEGRA186_SID_GPU>;
-	};
-
-Example for GV11B:
-
-	gpu@17000000 {
-		compatible = "nvidia,gv11b";
-		reg = <0x17000000 0x1000000>,
-		      <0x18000000 0x1000000>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "stall", "nonstall";
-		clocks = <&bpmp TEGRA194_CLK_GPCCLK>,
-			 <&bpmp TEGRA194_CLK_GPU_PWR>,
-			 <&bpmp TEGRA194_CLK_FUSE>;
-		clock-names = "gpu", "pwr", "fuse";
-		resets = <&bpmp TEGRA194_RESET_GPU>;
-		reset-names = "gpu";
-		dma-coherent;
-
-		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
-		iommus = <&smmu TEGRA194_SID_GPU>;
-	};
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.yaml b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.yaml
new file mode 100644
index 000000000000..4d856a8b674c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/nvidia,gk20a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Graphics Processing Units
+
+maintainers:
+  - Alexandre Courbot <acourbot@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <treding@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,gk20a
+      - nvidia,gm20b
+      - nvidia,gp10b
+      - nvidia,gv11b
+
+  reg:
+    items:
+      - description: Bar0 register window
+      - description: Bar1 register window
+
+  interrupts:
+    items:
+      - description: Stall interrupt
+      - description: Nonstall interrupt
+
+  interrupt-names:
+    items:
+      - const: stall
+      - const: nonstall
+
+  vdd-supply:
+    description:
+      Regulator for GPU supply voltage
+
+  clocks:
+    minItems: 2
+    items:
+      - description: GPU clock
+      - description: Power clock
+      - description: Reference or fuse clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: gpu
+      - const: pwr
+      - enum: [ ref, fuse ]
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: gpu
+
+  power-domains:
+    maxItems: 1
+
+  interconnects:
+    minItems: 4
+    maxItems: 12
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 12
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,gp10b
+              - nvidia,gv11b
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        interconnects: false
+        interconnect-names: false
+
+      required:
+        - vdd-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,gp10b
+    then:
+      properties:
+        interconnects:
+          maxItems: 4
+
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: write-0
+            - const: read-1
+            - const: write-1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,gv11b
+    then:
+      properties:
+        interconnects:
+          minItems: 12
+
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: read-0-hp
+            - const: write-0
+            - const: read-1
+            - const: read-1-hp
+            - const: write-1
+            - const: read-2
+            - const: read-2-hp
+            - const: write-2
+            - const: read-3
+            - const: read-3-hp
+            - const: write-3
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/tegra124-car-common.h>
+    #include <dt-bindings/memory/tegra124-mc.h>
+
+    gpu@57000000 {
+        compatible = "nvidia,gk20a";
+        reg = <0x57000000 0x01000000>,
+              <0x58000000 0x01000000>;
+        interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "stall", "nonstall";
+        vdd-supply = <&vdd_gpu>;
+        clocks = <&tegra_car TEGRA124_CLK_GPU>,
+                 <&tegra_car TEGRA124_CLK_PLL_P_OUT5>;
+        clock-names = "gpu", "pwr";
+        resets = <&tegra_car 184>;
+        reset-names = "gpu";
+        iommus = <&mc TEGRA_SWGROUP_GPU>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml
index e7daae862578..132aaa49597b 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.yaml
@@ -22,36 +22,20 @@ properties:
   interrupts:
     maxItems: 1
 
-  clocks: {}
-  clock-names: {}
-  iommus: {}
-  power-domains: {}
-
-if:
-  properties:
-    compatible:
-      contains:
-        const: samsung,exynos5250-g2d
-
-then:
-  properties:
-    clocks:
-      items:
-        - description: fimg2d clock
-    clock-names:
-      items:
-        - const: fimg2d
-
-else:
-  properties:
-    clocks:
-      items:
-        - description: sclk_fimg2d clock
-        - description: fimg2d clock
-    clock-names:
-      items:
-        - const: sclk_fimg2d
-        - const: fimg2d
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
 
 required:
   - compatible
@@ -60,6 +44,33 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5250-g2d
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: fimg2d clock
+        clock-names:
+          items:
+            - const: fimg2d
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: sclk_fimg2d clock
+            - description: fimg2d clock
+        clock-names:
+          items:
+            - const: sclk_fimg2d
+            - const: fimg2d
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index 62486f55177d..18bf44e06e8f 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -12,10 +12,11 @@ maintainers:
 properties:
   compatible:
     enum:
-      - "samsung,s5pv210-rotator"
-      - "samsung,exynos4210-rotator"
-      - "samsung,exynos4212-rotator"
-      - "samsung,exynos5250-rotator"
+      - samsung,s5pv210-rotator
+      - samsung,exynos4210-rotator
+      - samsung,exynos4212-rotator
+      - samsung,exynos5250-rotator
+
   reg:
     maxItems: 1
 
@@ -53,4 +54,3 @@ examples:
         clocks = <&clock 278>;
         clock-names = "rotator";
     };
-
diff --git a/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml
index 5317ac64426a..9fb530e65d0e 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-scaler.yaml
@@ -21,40 +21,20 @@ properties:
   interrupts:
     maxItems: 1
 
-  clocks: {}
-  clock-names: {}
-  iommus: {}
-  power-domains: {}
-
-if:
-  properties:
-    compatible:
-      contains:
-        const: samsung,exynos5420-scaler
-
-then:
-  properties:
-    clocks:
-      items:
-        - description: mscl clock
-
-    clock-names:
-      items:
-        - const: mscl
-
-else:
-  properties:
-    clocks:
-      items:
-        - description: pclk clock
-        - description: aclk clock
-        - description: aclk_xiu clock
-
-    clock-names:
-      items:
-        - const: pclk
-        - const: aclk
-        - const: aclk_xiu
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
 
 required:
   - compatible
@@ -63,6 +43,39 @@ required:
   - clocks
   - clock-names
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-scaler
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: mscl clock
+        clock-names:
+          items:
+            - const: mscl
+        iommus:
+          minItems: 2
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: pclk clock
+            - description: aclk clock
+            - description: aclk_xiu clock
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+        iommus:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
index 93e7244cdc0e..b1b10ea70ad9 100644
--- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
+++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/gpu/vivante,gc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Vivante GPU Bindings
+title: Vivante GPU
 
 description: Vivante GPU core devices
 
diff --git a/Documentation/devicetree/bindings/h8300/cpu.txt b/Documentation/devicetree/bindings/h8300/cpu.txt
deleted file mode 100644
index 70cd58608f4b..000000000000
--- a/Documentation/devicetree/bindings/h8300/cpu.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* H8/300 CPU bindings
-
-Required properties:
-
-- compatible: Compatible property value should be "renesas,h8300".
-- clock-frequency: Contains the clock frequency for CPU, in Hz.
-
-Example:
-
-		cpu@0 {
-			compatible = "renesas,h8300";
-			clock-frequency = <20000000>;
-		};
diff --git a/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml
new file mode 100644
index 000000000000..9d0c36ec1982
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/loongson,ls2k-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC ChipID
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+description: |
+  Loongson-2 SoC contains many groups of global utilities register
+  blocks, of which the ChipID group registers record SoC version,
+  feature, vendor and id information.
+
+properties:
+  compatible:
+    const: loongson,ls2k-chipid
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid: chipid@1fe00000 {
+        compatible = "loongson,ls2k-chipid";
+        reg = <0x1fe00000 0x3ffc>;
+        little-endian;
+    };
diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
index 1f80767da38b..792f371cec03 100644
--- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
+++ b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
@@ -1,7 +1,7 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/renesas,prr.yaml#
+$id: http://devicetree.org/schemas/hwinfo/renesas,prr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas Product Register
diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
new file mode 100644
index 000000000000..b9cdfe52b62f
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/samsung,exynos-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series Chipid driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos4210-chipid
+          - samsung,exynos850-chipid
+      - items:
+          - enum:
+              - samsung,exynos5433-chipid
+              - samsung,exynos7-chipid
+              - samsung,exynos7870-chipid
+              - samsung,exynos8890-chipid
+          - const: samsung,exynos4210-chipid
+      - items:
+          - enum:
+              - samsung,exynos2200-chipid
+              - samsung,exynos7885-chipid
+              - samsung,exynos8895-chipid
+              - samsung,exynos9610-chipid
+              - samsung,exynos9810-chipid
+              - samsung,exynos990-chipid
+              - samsung,exynosautov9-chipid
+              - samsung,exynosautov920-chipid
+          - const: samsung,exynos850-chipid
+
+  reg:
+    maxItems: 1
+
+  samsung,asv-bin:
+    description:
+      Adaptive Supply Voltage bin selection. This can be used
+      to determine the ASV bin of an SoC if respective information
+      is missing in the CHIPID registers or in the OTP memory.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@10000000 {
+        compatible = "samsung,exynos4210-chipid";
+        reg = <0x10000000 0x100>;
+        samsung,asv-bin = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml
new file mode 100644
index 000000000000..563ded4fca83
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/samsung,s5pv210-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 SoC ChipID
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: samsung,s5pv210-chipid
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@e0000000 {
+        compatible = "samsung,s5pv210-chipid";
+        reg = <0xe0000000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml b/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
new file mode 100644
index 000000000000..dada28b47ea0
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/ti,k3-socinfo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Multicore SoC platforms chipid module
+
+maintainers:
+  - Tero Kristo <t-kristo@ti.com>
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Texas Instruments (ARM64) K3 Multicore SoC platforms chipid module is
+  represented by CTRLMMR_xxx_JTAGID register which contains information about
+  SoC id and revision.
+
+properties:
+  $nodename:
+    pattern: "^chipid@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: ti,am654-chipid
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@43000014 {
+        compatible = "ti,am654-chipid";
+        reg = <0x43000014 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/hwinfo/via,vt8500-scc-id.yaml b/Documentation/devicetree/bindings/hwinfo/via,vt8500-scc-id.yaml
new file mode 100644
index 000000000000..b0f425a4a882
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/via,vt8500-scc-id.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/via,vt8500-scc-id.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIA/WonderMedia SoC system configuration information
+
+maintainers:
+  - Alexey Charkov <alchark@gmail.com>
+
+description:
+  The system configuration controller on VIA/WonderMedia SoC's contains a chip
+  identifier and revision used to differentiate between different hardware
+  versions of on-chip IP blocks having their own peculiarities which may or
+  may not be captured by their respective DT compatible strings
+
+properties:
+  compatible:
+    items:
+      - const: via,vt8500-scc-id
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@d8120000 {
+        compatible = "via,vt8500-scc-id";
+        reg = <0xd8120000 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
index 10e5a53e447b..584cce3211c0 100644
--- a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/hwlock/allwinner,sun6i-a31-hwspinlock.yaml#
@@ -26,11 +26,15 @@ properties:
   resets:
     maxItems: 1
 
+  '#hwlock-cells':
+    const: 1
+
 required:
   - compatible
   - reg
   - clocks
   - resets
+  - "#hwlock-cells"
 
 additionalProperties: false
 
@@ -44,5 +48,6 @@ examples:
         reg = <0x01c18000 0x1000>;
         clocks = <&ccu CLK_BUS_SPINLOCK>;
         resets = <&ccu RST_BUS_SPINLOCK>;
+        #hwlock-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
index 1c7149f7d171..ee2726149cf3 100644
--- a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
@@ -15,9 +15,22 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,sfpb-mutex
-      - qcom,tcsr-mutex
+    oneOf:
+      - enum:
+          - qcom,sfpb-mutex
+          - qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,apq8084-tcsr-mutex
+              - qcom,ipq6018-tcsr-mutex
+              - qcom,msm8226-tcsr-mutex
+              - qcom,msm8994-tcsr-mutex
+          - const: qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,msm8974-tcsr-mutex
+          - const: qcom,tcsr-mutex
+          - const: syscon
 
   reg:
     maxItems: 1
@@ -34,9 +47,9 @@ additionalProperties: false
 
 examples:
   - |
-        tcsr_mutex: hwlock@1f40000 {
-                compatible = "qcom,tcsr-mutex";
-                reg = <0x01f40000 0x40000>;
-                #hwlock-cells = <1>;
-        };
+    hwlock@1f40000 {
+        compatible = "qcom,tcsr-mutex";
+        reg = <0x01f40000 0x40000>;
+        #hwlock-cells = <1>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/hwlock/sprd,hwspinlock-r3p0.yaml b/Documentation/devicetree/bindings/hwlock/sprd,hwspinlock-r3p0.yaml
new file mode 100644
index 000000000000..abe11df25761
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/sprd,hwspinlock-r3p0.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwlock/sprd,hwspinlock-r3p0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum hardware spinlock
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    const: sprd,hwspinlock-r3p0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: enable
+
+  '#hwlock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#hwlock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+
+    hwlock@40500000 {
+      compatible = "sprd,hwspinlock-r3p0";
+      reg = <0x40500000 0x1000>;
+      clocks = <&aon_gate CLK_SPLK_EB>;
+      clock-names = "enable";
+      #hwlock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt
deleted file mode 100644
index 581db9d941ba..000000000000
--- a/Documentation/devicetree/bindings/hwlock/sprd-hwspinlock.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-SPRD Hardware Spinlock Device Binding
--------------------------------------
-
-Required properties :
-- compatible : should be "sprd,hwspinlock-r3p0".
-- reg : the register address of hwspinlock.
-- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
-	hwlock, so the number of cells should be <1> here.
-- clock-names : Must contain "enable".
-- clocks : Must contain a phandle entry for the clock in clock-names, see the
-	common clock bindings.
-
-Please look at the generic hwlock binding for usage information for consumers,
-"Documentation/devicetree/bindings/hwlock/hwlock.txt"
-
-Example of hwlock provider:
-	hwspinlock@40500000 {
-		compatible  = "sprd,hwspinlock-r3p0";
-		reg = <0 0x40500000 0 0x1000>;
-		#hwlock-cells = <1>;
-		clock-names = "enable";
-		clocks = <&clk_aon_apb_gates0 22>;
-	};
diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
index b18c616035a8..829d1fdf4c67 100644
--- a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/hwlock/st,stm32-hwspinlock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Hardware Spinlock bindings
+title: STMicroelectronics STM32 Hardware Spinlock
 
 maintainers:
   - Fabien Dessenne <fabien.dessenne@foss.st.com>
diff --git a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
index ae1b37dbee75..5ba60d532fcd 100644
--- a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/hwlock/ti,omap-hwspinlock.yaml#
@@ -39,39 +39,8 @@ additionalProperties: false
 examples:
 
   - |
-    /* OMAP4 SoCs */
-    hwspinlock: spinlock@4a0f6000 {
+    spinlock@4a0f6000 {
         compatible = "ti,omap4-hwspinlock";
         reg = <0x4a0f6000 0x1000>;
         #hwlock-cells = <1>;
     };
-
-  - |
-    / {
-        /* K3 AM65x SoCs */
-        model = "Texas Instruments K3 AM654 SoC";
-        compatible = "ti,am654-evm", "ti,am654";
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        bus@100000 {
-            compatible = "simple-bus";
-            #address-cells = <2>;
-            #size-cells = <2>;
-            ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
-                     <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>; /* Main NavSS */
-
-            bus@30800000 {
-                compatible = "simple-mfd";
-                #address-cells = <2>;
-                #size-cells = <2>;
-                ranges = <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>;
-
-                spinlock@30e00000 {
-                    compatible = "ti,am654-hwspinlock";
-                    reg = <0x00 0x30e00000 0x00 0x1000>;
-                    #hwlock-cells = <1>;
-                };
-            };
-        };
-    };
diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
deleted file mode 100644
index d0ae46d7bac3..000000000000
--- a/Documentation/devicetree/bindings/hwmon/adc128d818.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-TI ADC128D818 ADC System Monitor With Temperature Sensor
---------------------------------------------------------
-
-Operation modes:
-
- - Mode 0:  7 single-ended voltage readings (IN0-IN6),
-            1 temperature reading (internal)
- - Mode 1:  8 single-ended voltage readings (IN0-IN7),
-            no temperature
- - Mode 2:  4 pseudo-differential voltage readings
-              (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
-            1 temperature reading (internal)
- - Mode 3:  4 single-ended voltage readings (IN0-IN3),
-            2 pseudo-differential voltage readings
-              (IN4-IN5, IN7-IN6),
-            1 temperature reading (internal)
-
-If no operation mode is configured via device tree, the driver keeps the
-currently active chip operation mode (default is mode 0).
-
-
-Required node properties:
-
- - compatible:  must be set to "ti,adc128d818"
- - reg:         I2C address of the device
-
-Optional node properties:
-
- - ti,mode:     Operation mode (u8) (see above).
-
-
-Example (operation mode 2):
-
-	adc128d818@1d {
-		compatible = "ti,adc128d818";
-		reg = <0x1d>;
-		ti,mode = /bits/ 8 <2>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
index ce7f8ce9da0a..236d8b52ef85 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/hwmon/adi,ad741x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
index 154bee851139..be7e9e91a3a8 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -8,7 +8,6 @@ title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Beniamin Bia <beniamin.bia@analog.com>
 
 description: |
   Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
@@ -28,7 +27,7 @@ properties:
 
   shunt-resistor-micro-ohms:
     description:
-      The value of curent sense resistor in microohms. If not provided,
+      The value of current sense resistor in microohms. If not provided,
       the current reading and overcurrent alert is disabled.
 
   adi,shutdown-threshold-microamp:
@@ -47,22 +46,25 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         pwmon@5a {
-                compatible = "adi,adm1177";
-                reg = <0x5a>;
-                shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
-                adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
-                adi,vrange-high-enable;
+            compatible = "adi,adm1177";
+            reg = <0x5a>;
+            shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
+            adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
+            adi,vrange-high-enable;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
index 43b4f4f57b49..fe87a592de45 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
@@ -8,7 +8,7 @@ title: Analog Devices ADM1266 Cascadable Super Sequencer with Margin
   Control and Fault Recording
 
 maintainers:
-  - Alexandru Tachici <alexandru.tachici@analog.com>
+  - Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
 
 description: |
   Analog Devices ADM1266 Cascadable Super Sequencer with Margin
@@ -39,13 +39,13 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         adm1266@40 {
-                compatible = "adi,adm1266";
-                reg = <0x40>;
+            compatible = "adi,adm1266";
+            reg = <0x40>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
index 223393d7cafd..d6a7517f2a50 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
+title: Analog Devices ADM1075/ADM127x/ADM1281/ADM129x digital power monitors
 
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
@@ -19,29 +18,105 @@ description: |
   Datasheets:
     https://www.analog.com/en/products/adm1294.html
 
+  The SQ24905C is also a Hot-swap controller compatibility to the ADM1278,
+  the PMBUS_MFR_MODEL is MC09C
+
+  Datasheets:
+    https://www.silergy.com/
+    download/downloadFile?id=5669&type=product&ftype=note
+
 properties:
   compatible:
     enum:
       - adi,adm1075
       - adi,adm1272
+      - adi,adm1273
       - adi,adm1275
       - adi,adm1276
       - adi,adm1278
+      - adi,adm1281
       - adi,adm1293
       - adi,adm1294
+      - silergy,mc09c
 
   reg:
     maxItems: 1
 
-  shunt-resistor-micro-ohms:
-    description:
-      Shunt resistor value in micro-Ohm.
+  adi,volt-curr-sample-average:
+    description: |
+      Number of samples to be used to report voltage and current values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+  adi,power-sample-average:
+    description: |
+      Number of samples to be used to report power values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+allOf:
+  - $ref: hwmon-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1075
+              - adi,adm1276
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1275
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 16
+        adi,power-sample-average: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1272
+              - adi,adm1273
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average:
+          default: 128
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1278
+              - adi,adm1281
+              - adi,adm1293
+              - adi,adm1294
+              - silergy,mc09c
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average:
+          default: 1
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -53,5 +128,7 @@ examples:
             compatible = "adi,adm1272";
             reg = <0x10>;
             shunt-resistor-micro-ohms = <500>;
+            adi,volt-curr-sample-average = <128>;
+            adi,power-sample-average = <128>;
         };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
index 6747b870f297..6751f9b643b4 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -5,13 +5,13 @@
 $id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AXI FAN Control Device Tree Bindings
+title: Analog Devices AXI FAN Control
 
 maintainers:
   - Nuno Sá <nuno.sa@analog.com>
 
 description: |+
-  Bindings for the Analog Devices AXI FAN Control driver. Spefications of the
+  Bindings for the Analog Devices AXI FAN Control driver. Specifications of the
   core can be found in:
 
   https://wiki.analog.com/resources/fpga/docs/axi_fan_control
@@ -49,15 +49,15 @@ additionalProperties: false
 examples:
   - |
     fpga_axi: fpga-axi {
-            #address-cells = <0x2>;
-            #size-cells = <0x1>;
-
-            axi_fan_control: axi-fan-control@80000000 {
-                    compatible = "adi,axi-fan-control-1.00.a";
-                    reg = <0x0 0x80000000 0x10000>;
-                    clocks = <&clk 71>;
-                    interrupts = <0 110 0>;
-                    pulses-per-revolution = <2>;
-            };
+        #address-cells = <0x2>;
+        #size-cells = <0x1>;
+
+        axi_fan_control: axi-fan-control@80000000 {
+            compatible = "adi,axi-fan-control-1.00.a";
+            reg = <0x0 0x80000000 0x10000>;
+            clocks = <&clk 71>;
+            interrupts = <0 110 0>;
+            pulses-per-revolution = <2>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
new file mode 100644
index 000000000000..6401b0a9aff4
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc2945.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2945 wide range i2c power monitor
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  Analog Devices LTC2945 wide range i2c power monitor over I2C.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2945.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2945
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt resistor value in micro-Ohms
+    default: 1000
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@6e {
+            compatible = "adi,ltc2945";
+            reg = <0x6e>;
+            /* 10 milli-Ohm shunt resistor */
+            shunt-resistor-micro-ohms = <10000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
index bf04151b63d2..3e3f49cf2f52 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -81,21 +81,20 @@ required:
   - compatible
   - reg
 
-
 additionalProperties: false
 
 examples:
   - |
     spi {
-           #address-cells = <1>;
-           #size-cells = <0>;
-
-           ltc2947_spi: ltc2947@0 {
-                   compatible = "adi,ltc2947";
-                   reg = <0>;
-                   /* accumulation takes place always for energ1/charge1. */
-                   /* accumulation only on positive current for energy2/charge2. */
-                   adi,accumulator-ctl-pol = <0 1>;
-           };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ltc2947_spi: ltc2947@0 {
+            compatible = "adi,ltc2947";
+            reg = <0>;
+            /* accumulation takes place always for energ1/charge1. */
+            /* accumulation only on positive current for energy2/charge2. */
+            adi,accumulator-ctl-pol = <0 1>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2991.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2991.yaml
new file mode 100644
index 000000000000..1ff44cb22ef4
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2991.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc2991.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2991 Octal I2C Voltage, Current and Temperature Monitor
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The LTC2991 is used to monitor system temperatures, voltages and currents.
+  Through the I2C serial interface, the eight monitors can individually measure
+  supply voltages and can be paired for differential measurements of current
+  sense resistors or temperature sensing transistors.
+
+  Datasheet:
+    https://www.analog.com/en/products/ltc2991.html
+
+properties:
+  compatible:
+    const: adi,ltc2991
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  vcc-supply: true
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+    description:
+      Represents the differential/temperature channels.
+
+    properties:
+      reg:
+        description:
+          The channel number. LTC2991 can monitor 4 currents/temperatures.
+        items:
+          minimum: 0
+          maximum: 3
+
+      shunt-resistor-micro-ohms:
+        description:
+          The value of curent sense resistor in micro ohms. Pin configuration is
+          set for differential input pair.
+
+      adi,temperature-enable:
+        description:
+          Enables temperature readings. Pin configuration is set for remote
+          diode temperature measurement.
+        type: boolean
+
+    required:
+      - reg
+
+    allOf:
+      - if:
+          required:
+            - shunt-resistor-micro-ohms
+        then:
+          properties:
+            adi,temperature-enable: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@48 {
+            compatible = "adi,ltc2991";
+            reg = <0x48>;
+            vcc-supply = <&vcc>;
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@48 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ltc2991";
+            reg = <0x48>;
+            vcc-supply = <&vcc>;
+
+            channel@0 {
+                    reg = <0x0>;
+                    shunt-resistor-micro-ohms = <100000>;
+            };
+
+            channel@1 {
+                    reg = <0x1>;
+                    shunt-resistor-micro-ohms = <100000>;
+            };
+
+            channel@2 {
+                    reg = <0x2>;
+                    adi,temperature-enable;
+            };
+
+            channel@3 {
+                    reg = <0x3>;
+                    adi,temperature-enable;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
index 64a8fcb7bc46..38a8f3a14c02 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Linear Technology 2992 Power Monitor
 
 maintainers:
-  - Alexandru Tachici <alexandru.tachici@analog.com>
+  - Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
 
 description: |
   Linear Technology 2992 Dual Wide Range Power Monitor
@@ -32,6 +32,7 @@ properties:
 patternProperties:
   "^channel@([0-1])$":
     type: object
+    additionalProperties: false
     description: |
       Represents the two supplies to be monitored.
 
@@ -45,7 +46,7 @@ patternProperties:
 
       shunt-resistor-micro-ohms:
         description:
-          The value of curent sense resistor in microohms.
+          The value of current sense resistor in microohms.
 
 required:
   - compatible
@@ -55,26 +56,26 @@ additionalProperties: false
 
 examples:
   - |
-    i2c1 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
-        ltc2992@6F {
-                #address-cells = <1>;
-                #size-cells = <0>;
+        ltc2992@6f {
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-                compatible = "adi,ltc2992";
-                reg = <0x6F>;
+            compatible = "adi,ltc2992";
+            reg = <0x6f>;
 
-                channel@0 {
-                        reg = <0x0>;
-                        shunt-resistor-micro-ohms = <10000>;
-                };
+            channel@0 {
+                reg = <0x0>;
+                shunt-resistor-micro-ohms = <10000>;
+            };
 
-                channel@1 {
-                        reg = <0x1>;
-                        shunt-resistor-micro-ohms = <10000>;
-                };
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <10000>;
+            };
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml
new file mode 100644
index 000000000000..4854b95a93e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc4282.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc4282.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C
+
+maintainers:
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC4282 I2C High Current Hot Swap Controller over I2C.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc4282.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc4282
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  adi,rsense-nano-ohms:
+    description: Value of the sense resistor.
+
+  adi,vin-mode-microvolt:
+    description:
+      Selects operating range for the Undervoltage, Overvoltage and Foldback
+      pins. Also for the ADC. Should be set to the nominal input voltage.
+    enum: [3300000, 5000000, 12000000, 24000000]
+    default: 12000000
+
+  adi,fet-bad-timeout-ms:
+    description:
+      From the moment a FET bad conditions is present, this property selects the
+      wait time/timeout for a FET-bad fault to be signaled. Setting this to 0,
+      disables FET bad faults to be reported.
+    default: 255
+    maximum: 255
+
+  adi,overvoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,undervoltage-dividers:
+    description: |
+      Select which dividers to use for VDD Overvoltage detection. Note that
+      when the internal dividers are used the threshold is referenced to VDD.
+      The percentages in the datasheet are misleading since the actual values
+      to look for are in the "Absolute Maximum Ratings" table in the
+      "Comparator Inputs" section. In there there's a line for each of the 5%,
+      10% and 15% settings with the actual min, typical and max tolerances.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [external, vdd_5_percent, vdd_10_percent, vdd_15_percent]
+    default: external
+
+  adi,current-limit-sense-microvolt:
+    description:
+      The current limit sense voltage of the chip is adjustable between
+      12.5mV and 34.4mV in 3.1mV steps. This effectively limits the current
+      on the load.
+    enum: [12500, 15625, 18750, 21875, 25000, 28125, 31250, 34375]
+    default: 25000
+
+  adi,overcurrent-retry:
+    description:
+      If set, enables the chip to auto-retry 256 timer cycles after an
+      Overcurrent fault.
+    type: boolean
+
+  adi,overvoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Overvoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,undervoltage-retry-disable:
+    description:
+      If set, disables the chip to auto-retry 50ms after an Undervoltage fault.
+      It's enabled by default.
+    type: boolean
+
+  adi,fault-log-enable:
+    description:
+      If set, enables the FAULT_LOG and ADC_ALERT_LOG registers to be written
+      to the EEPROM when a fault bit transitions high and hence, will be
+      available after a power cycle (the chip loads the contents of
+      the EE_FAULT_LOG register - the one in EEPROM - into FAULT_LOG at boot).
+    type: boolean
+
+  adi,gpio1-mode:
+    description: Defines the function of the Pin. It can indicate that power is
+      good (PULL the pin low when power is not good) or that power is bad (Go
+      into high-z when power is not good).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [power_bad, power_good]
+    default: power_good
+
+  adi,gpio2-mode:
+    description: Defines the function of the Pin. It can be set as the input for
+      the ADC or indicating that the MOSFET is in stress (dissipating power).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [adc_input, stress_fet]
+    default: adc_input
+
+  adi,gpio3-monitor-enable:
+    description: If set, gpio3 is set as input for the ADC instead of gpio2.
+    type: boolean
+
+allOf:
+  - if:
+      required:
+        - adi,gpio3-monitor-enable
+    then:
+      properties:
+        adi,gpio2-mode:
+          const: stress_fet
+
+required:
+  - compatible
+  - reg
+  - adi,rsense-nano-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@50 {
+            compatible = "adi,ltc4282";
+            reg = <0x50>;
+            adi,rsense-nano-ohms = <500>;
+
+            adi,gpio1-mode = "power_good";
+            adi,gpio2-mode = "adc_input";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml
new file mode 100644
index 000000000000..9f2d08d7b978
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,max31760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31760 Fan-Speed Controller
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Analog Devices MAX31760 Fan-Speed Controller
+  https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max31760
+
+  reg:
+    description: I2C address of slave device.
+    minimum: 0x50
+    maximum: 0x57
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan-controller@50 {
+            reg = <0x50>;
+            compatible = "adi,max31760";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
new file mode 100644
index 000000000000..c2f7c6ee1a37
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,max31827.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch
+
+maintainers:
+  - Daniel Matyas <daniel.matyas@analog.com>
+
+description: |
+  Analog Devices MAX31827, MAX31828, MAX31829 Low-Power Temperature Switch with
+  I2C Interface
+  https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - const: adi,max31827
+      - items:
+          - enum:
+              - adi,max31828
+              - adi,max31829
+          - const: adi,max31827
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Must have values in the interval (1.6V; 3.6V) in order for the device to
+      function correctly.
+
+  adi,comp-int:
+    description:
+      If present interrupt mode is used. If not present comparator mode is used
+      (default).
+    type: boolean
+
+  adi,alarm-pol:
+    description:
+      Sets the alarms active state.
+            - 0 = active low
+            - 1 = active high
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  adi,fault-q:
+    description:
+      Select how many consecutive temperature faults must occur before
+      overtemperature or undertemperature faults are indicated in the
+      corresponding status bits.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
+  adi,timeout-enable:
+    description:
+      Enables timeout. Bus timeout resets the I2C-compatible interface when SCL
+      is low for more than 30ms (nominal).
+    type: boolean
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,max31829
+
+    then:
+      properties:
+        adi,alarm-pol:
+          default: 1
+
+    else:
+      properties:
+        adi,alarm-pol:
+          default: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,max31827
+
+    then:
+      properties:
+        adi,fault-q:
+          default: 1
+
+    else:
+      properties:
+        adi,fault-q:
+          default: 4
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@42 {
+            compatible = "adi,max31827";
+            reg = <0x42>;
+            vref-supply = <&reg_vdd>;
+            adi,comp-int;
+            adi,alarm-pol = <0>;
+            adi,fault-q = <1>;
+            adi,timeout-enable;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 7d9c083632b9..43e9fe225870 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -45,22 +45,68 @@ properties:
       the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm
       uses a logic high output for 100% duty cycle.
     $ref: /schemas/types.yaml#/definitions/uint32-array
+    deprecated: true
     minItems: 3
     maxItems: 3
     items:
       enum: [0, 1]
       default: 1
 
+  "#pwm-cells":
+    oneOf:
+      - const: 3
+      - const: 4
+        deprecated: true
+    description: |
+      Number of cells in a PWM specifier.
+      - 0: The PWM channel
+      - 1: The PWM period in nanoseconds
+           - 90909091 (11 Hz)
+           - 71428571 (14 Hz)
+           - 45454545 (22 Hz)
+           - 34482759 (29 Hz)
+           - 28571429 (35 Hz)
+           - 22727273 (44 Hz)
+           - 17241379 (58 Hz)
+           - 11363636 (88 Hz)
+           - 44444 (22 kHz)
+      - 2: PWM flags 0 or PWM_POLARITY_INVERTED
+      - 3: The default PWM duty cycle in nanoseconds, defaults to period.
+
 patternProperties:
   "^adi,bypass-attenuator-in[0-4]$":
     description: |
       Configures bypassing the individual voltage input attenuator. If
       set to 1 the attenuator is bypassed if set to 0 the attenuator is
       not bypassed. If the property is absent then the attenuator
-      retains it's configuration from the bios/bootloader.
+      retains its configuration from the bios/bootloader.
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
+  "^adi,pin(5|10)-function$":
+    description: |
+      Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or
+      pin 10 on the adi,adt7476 and adi,adt7490.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - pwm2
+      - smbalert#
+
+  "^adi,pin(9|14)-function$":
+    description: |
+      Configures the function for pin 9 on the adi,adt7473 and adi,adt7475. Or
+      pin 14 on the adi,adt7476 and adi,adt7490
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - tach4
+      - therm#
+      - smbalert#
+      - gpio
+
+  "^fan-[0-9]+$":
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -69,16 +115,27 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/pwm/pwm.h>
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
-      hwmon@2e {
+      pwm: hwmon@2e {
         compatible = "adi,adt7476";
         reg = <0x2e>;
         adi,bypass-attenuator-in0 = <1>;
         adi,bypass-attenuator-in1 = <0>;
-        adi,pwm-active-state = <1 0 1>;
+        adi,pin10-function = "smbalert#";
+        adi,pin14-function = "tach4";
+        #pwm-cells = <3>;
+
+        /* PWMs at 22.5 kHz frequency */
+        fan-0 {
+          pwms = <&pwm 0 44444 0>;
+        };
+
+        fan-1 {
+          pwms = <&pwm 2 44444 0>;
+        };
       };
     };
-
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
index 7598b083979c..353d81d89bf5 100644
--- a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
@@ -41,13 +41,13 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         sbrmi@3c {
-                compatible = "amd,sbrmi";
-                reg = <0x3c>;
+            compatible = "amd,sbrmi";
+            reg = <0x3c>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
index 446b09f1ce94..75088244a274 100644
--- a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
@@ -42,13 +42,13 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         sbtsi@4c {
-                compatible = "amd,sbtsi";
-                reg = <0x4c>;
+            compatible = "amd,sbtsi";
+            reg = <0x4c>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml b/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
new file mode 100644
index 000000000000..17351fdbefce
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/amphenol,chipcap2.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amphenol,chipcap2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipCap 2 humidity and temperature iio sensor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  Relative humidity and temperature sensor on I2C bus.
+
+  Datasheets:
+    https://www.amphenol-sensors.com/en/telaire/humidity/527-humidity-sensors/3095-chipcap-2
+
+properties:
+  compatible:
+    oneOf:
+      - const: amphenol,cc2d23
+      - items:
+          - enum:
+              - amphenol,cc2d23s
+              - amphenol,cc2d25
+              - amphenol,cc2d25s
+              - amphenol,cc2d33
+              - amphenol,cc2d33s
+              - amphenol,cc2d35
+              - amphenol,cc2d35s
+          - const: amphenol,cc2d23
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: measurement ready indicator
+      - description: low humidity alarm
+      - description: high humidity alarm
+
+  interrupt-names:
+    items:
+      - const: ready
+      - const: low
+      - const: high
+
+  vdd-supply:
+    description:
+      Dedicated, controllable supply-regulator to reset the device and
+      enter in command mode.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity@28 {
+            compatible = "amphenol,cc2d23s", "amphenol,cc2d23";
+            reg = <0x28>;
+            interrupt-parent = <&gpio>;
+            interrupts = <4 IRQ_TYPE_EDGE_RISING>,
+                         <5 IRQ_TYPE_EDGE_RISING>,
+                         <6 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "ready", "low", "high";
+            vdd-supply = <&reg_vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/apm,xgene-slimpro-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/apm,xgene-slimpro-hwmon.yaml
new file mode 100644
index 000000000000..58c51626a9ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/apm,xgene-slimpro-hwmon.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/apm,xgene-slimpro-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SLIMpro hwmon
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+properties:
+  compatible:
+    const: apm,xgene-slimpro-hwmon
+
+  mboxes:
+    maxItems: 1
+
+required:
+  - compatible
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon {
+        compatible = "apm,xgene-slimpro-hwmon";
+        mboxes = <&mailbox 7>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt
deleted file mode 100644
index 59b38557f1bb..000000000000
--- a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-APM X-Gene hwmon driver
-
-APM X-Gene SOC sensors are accessed over the "SLIMpro" mailbox.
-
-Required properties :
- - compatible : should be "apm,xgene-slimpro-hwmon"
- - mboxes : use the label reference for the mailbox as the first parameter.
-	    The second parameter is the channel number.
-
-Example :
-	hwmonslimpro {
-		compatible = "apm,xgene-slimpro-hwmon";
-		mboxes = <&mailbox 7>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/as370.txt b/Documentation/devicetree/bindings/hwmon/as370.txt
deleted file mode 100644
index d102fe765124..000000000000
--- a/Documentation/devicetree/bindings/hwmon/as370.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-Bindings for Synaptics AS370 PVT sensors
-
-Required properties:
-- compatible : "syna,as370-hwmon"
-- reg        : address and length of the register set.
-
-Example:
-	hwmon@ea0810 {
-		compatible = "syna,as370-hwmon";
-		reg = <0xea0810 0xc>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
new file mode 100644
index 000000000000..851fb16ec7fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2023 Aspeed, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED G6 PWM and Fan Tach controller
+
+maintainers:
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+  The ASPEED PWM controller can support up to 16 PWM outputs.
+  The ASPEED Fan Tacho controller can support up to 16 fan tach input.
+  They are independent hardware blocks, which are different from the
+  previous version of the ASPEED chip.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: aspeed,ast2700-pwm-tach
+          - const: aspeed,ast2600-pwm-tach
+      - const: aspeed,ast2600-pwm-tach
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 3
+
+patternProperties:
+  "^fan-[0-9]+$":
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+    required:
+      - tach-ch
+
+required:
+  - reg
+  - clocks
+  - resets
+  - "#pwm-cells"
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    pwm_tach: pwm-tach-controller@1e610000 {
+      compatible = "aspeed,ast2600-pwm-tach";
+      reg = <0x1e610000 0x100>;
+      clocks = <&syscon ASPEED_CLK_AHB>;
+      resets = <&syscon ASPEED_RESET_PWM>;
+      #pwm-cells = <3>;
+
+      fan-0 {
+        tach-ch = /bits/ 8 <0x0>;
+        pwms = <&pwm_tach 0 40000 0>;
+      };
+
+      fan-1 {
+        tach-ch = /bits/ 8 <0x1 0x2>;
+        pwms = <&pwm_tach 1 40000 0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
index 3ac02988a1a5..8645cd3b867a 100644
--- a/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
+++ b/Documentation/devicetree/bindings/hwmon/aspeed-pwm-tacho.txt
@@ -45,7 +45,7 @@ Required properties for each child node:
 - aspeed,fan-tach-ch : should specify the Fan tach input channel.
                 integer value in the range 0 through 15, with 0 indicating
 		Fan tach channel 0 and 15 indicating Fan tach channel 15.
-		Atleast one Fan tach input channel is required.
+		At least one Fan tach input channel is required.
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/hwmon/fan-common.yaml b/Documentation/devicetree/bindings/hwmon/fan-common.yaml
new file mode 100644
index 000000000000..0fb738081699
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/fan-common.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/fan-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Fan Properties
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+properties:
+  max-rpm:
+    description:
+      Max RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 100000
+
+  min-rpm:
+    description:
+      Min RPM supported by fan.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1000
+
+  pulses-per-revolution:
+    description:
+      The number of pulse from fan sensor per revolution.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 4
+
+  tach-div:
+    description:
+      Divisor for the tach sampling clock, which determines the sensitivity of the tach pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  target-rpm:
+    description:
+      The default desired fan speed in RPM.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  fan-driving-mode:
+    description:
+      Select the driving mode of the fan.(DC, PWM and so on)
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ dc, pwm ]
+
+  pwms:
+    description:
+      PWM provider.
+    maxItems: 1
+
+  "#cooling-cells":
+    const: 2
+
+  cooling-levels:
+    description:
+      The control value which correspond to thermal cooling states.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  tach-ch:
+    description:
+      The tach channel used for the fan.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  label:
+    description:
+      Optional fan label
+
+  fan-supply:
+    description:
+      Power supply for fan.
+
+  reg:
+    maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/hwmon/g762.txt b/Documentation/devicetree/bindings/hwmon/g762.txt
deleted file mode 100644
index 6d154c4923de..000000000000
--- a/Documentation/devicetree/bindings/hwmon/g762.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-GMT G762/G763 PWM Fan controller
-
-Required node properties:
-
- - "compatible": must be either "gmt,g762" or "gmt,g763"
- - "reg": I2C bus address of the device
- - "clocks": a fixed clock providing input clock frequency
-	     on CLK pin of the chip.
-
-Optional properties:
-
- - "fan_startv": fan startup voltage. Accepted values are 0, 1, 2 and 3.
-	       The higher the more.
-
- - "pwm_polarity": pwm polarity. Accepted values are 0 (positive duty)
-	       and 1 (negative duty).
-
- - "fan_gear_mode": fan gear mode. Supported values are 0, 1 and 2.
-
-If an optional property is not set in .dts file, then current value is kept
-unmodified (e.g. u-boot installed value).
-
-Additional information on operational parameters for the device is available
-in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available
-at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf.
-
-Example g762 node:
-
-   clocks {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	g762_clk: fixedclk {
-		 compatible = "fixed-clock";
-		 #clock-cells = <0>;
-		 clock-frequency = <8192>;
-	}
-   }
-
-   g762: g762@3e {
-	compatible = "gmt,g762";
-	reg = <0x3e>;
-	clocks = <&g762_clk>
-	fan_gear_mode = <0>; /* chip default */
-	fan_startv = <1>;    /* chip default */
-	pwm_polarity = <0>;  /* chip default */
-   };
diff --git a/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml b/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml
new file mode 100644
index 000000000000..8e1bffd252e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/gmt,g762.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/gmt,g762.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GMT G761/G762/G763 PWM Fan controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+  GMT G761/G762/G763 PWM Fan controller.
+
+  G761 supports an internal-clock hence the clocks property is optional.
+  If not defined, internal-clock will be used. (31KHz is the clock of
+  the internal crystal oscillator)
+
+  If an optional property is not set in DT, then current value is kept
+  unmodified (e.g. bootloader installed value).
+
+  Additional information on operational parameters for the device is available
+  in Documentation/hwmon/g762.rst. A detailed datasheet for the device is available
+  at http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf.
+
+properties:
+  compatible:
+    enum:
+      - gmt,g761
+      - gmt,g762
+      - gmt,g763
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: a fixed clock providing input clock frequency on CLK
+      pin of the chip.
+    maxItems: 1
+
+  fan_startv:
+    description: Fan startup voltage step
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  pwm_polarity:
+    description: PWM polarity (positive or negative duty)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  fan_gear_mode:
+    description: FAN gear mode. Configure High speed fan setting factor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - gmt,g762
+          - gmt,g763
+then:
+  required:
+    - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        g762@3e {
+            compatible = "gmt,g762";
+            reg = <0x3e>;
+            clocks = <&g762_clk>;
+            fan_gear_mode = <0>;
+            fan_startv = <1>;
+            pwm_polarity = <0>;
+        };
+
+        g761@1e {
+            compatible = "gmt,g761";
+            reg = <0x1e>;
+            fan_gear_mode = <0>;
+            fan_startv = <1>;
+            pwm_polarity = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
deleted file mode 100644
index f4cfa350f6a1..000000000000
--- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Bindings for fan connected to GPIO lines
-
-Required properties:
-- compatible : "gpio-fan"
-
-Optional properties:
-- gpios: Specifies the pins that map to bits in the control value,
-  ordered MSB-->LSB.
-- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
-  control value that should be set to achieve them. This array
-  must have the RPM values in ascending order.
-- alarm-gpios: This pin going active indicates something is wrong with
-  the fan, and a udev event will be fired.
-- #cooling-cells: If used as a cooling device, must be <2>
-  Also see:
-  Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
-  min and max states are derived from the speed-map of the fan.
-
-Note: At least one the "gpios" or "alarm-gpios" properties must be set.
-
-Examples:
-
-	gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio1 14 1
-			 &gpio1 13 1>;
-		gpio-fan,speed-map = <0    0
-				      3000 1
-				      6000 2>;
-		alarm-gpios = <&gpio1 15 1>;
-	};
-	gpio_fan_cool: gpio_fan {
-		compatible = "gpio-fan";
-		gpios = <&gpio2 14 1
-			 &gpio2 13 1>;
-		gpio-fan,speed-map =	<0    0>,
-					<3000 1>,
-					<6000 2>;
-		alarm-gpios = <&gpio2 15 1>;
-		#cooling-cells = <2>; /* min followed by max */
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml b/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
new file mode 100644
index 000000000000..4faebbb4c7ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/gpio-fan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fan connected to GPIO lines
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    const: gpio-fan
+
+  gpios:
+    description: |
+      Specifies the pins that map to bits in the control value,
+      ordered MSB-->LSB.
+    minItems: 1
+    maxItems: 7
+
+  alarm-gpios:
+    maxItems: 1
+
+  fan-supply:
+    description: Power supply for fan
+
+  gpio-fan,speed-map:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 2
+    maxItems: 127
+    items:
+      items:
+        - description: fan speed in RPMs
+        - description: control value
+    description: |
+      A mapping of possible fan RPM speeds and the
+      control value that should be set to achieve them. This array
+      must have the RPM values in ascending order.
+
+  '#cooling-cells':
+    const: 2
+
+required:
+  - compatible
+  - gpios
+  - gpio-fan,speed-map
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-fan {
+      compatible = "gpio-fan";
+      gpios = <&gpio2 14 1
+               &gpio2 13 1>;
+      gpio-fan,speed-map = <   0 0>,
+                           <3000 1>,
+                           <6000 2>;
+      alarm-gpios = <&gpio2 15 1>;
+      #cooling-cells = <2>; /* min followed by max */
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml b/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml
new file mode 100644
index 000000000000..4a52aac6be72
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/hpe,gxp-fan-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP Fan Controller
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+
+description: |
+  The HPE GXP fan controller controls the fans through an external CPLD
+  device that connects to the fans.
+
+properties:
+  compatible:
+    const: hpe,gxp-fan-ctrl
+
+  reg:
+    items:
+      - description: Fan controller PWM
+      - description: Programmable logic
+      - description: Function 2
+
+  reg-names:
+    items:
+      - const: base
+      - const: pl
+      - const: fn2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    fan-controller@1000c00 {
+      compatible = "hpe,gxp-fan-ctrl";
+      reg = <0x1000c00 0x200>, <0xd1000000 0xff>, <0x80200000 0x100000>;
+      reg-names = "base", "pl", "fn2";
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml b/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml
new file mode 100644
index 000000000000..dc86b5c72cf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/hwmon-common.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/hwmon-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware Monitoring Devices Common Properties
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  label:
+    description: A descriptive name for this device.
+
+  shunt-resistor-micro-ohms:
+    description: The value of current sense resistor.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
new file mode 100644
index 000000000000..3dbdc5af2804
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM On-Chip Controller (OCC) accessed from a service processor
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  The POWER processor On-Chip Controller (OCC) helps manage power and
+  thermals for the system. A service processor or baseboard management
+  controller can query the OCC for it's power and thermal data to report
+  through hwmon.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-occ-hwmon
+      - ibm,p10-occ-hwmon
+
+  ibm,no-poll-on-init:
+    description: This property describes whether or not the OCC should
+      be polled during driver initialization.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon {
+        compatible = "ibm,p10-occ-hwmon";
+        ibm,no-poll-on-init;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml b/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml
new file mode 100644
index 000000000000..376ee7f1cdb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,opal-sensor.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,opal-sensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM POWERNV platform sensors
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ibm,opal-sensor-cooling-fan
+      - ibm,opal-sensor-amb-temp
+      - ibm,opal-sensor-power-supply
+      - ibm,opal-sensor-power
+
+  sensor-id:
+    description:
+      An opaque id provided by the firmware to the kernel, identifies a
+      given sensor and its attribute data.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - sensor-id
+
+additionalProperties: false
+
+examples:
+  - |
+    sensor {
+        compatible = "ibm,opal-sensor-cooling-fan";
+        sensor-id = <0x7052107>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt
deleted file mode 100644
index f93242be60a1..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-IBM POWERNV platform sensors
-----------------------------
-
-Required node properties:
-- compatible: must be one of
-		"ibm,opal-sensor-cooling-fan"
-		"ibm,opal-sensor-amb-temp"
-		"ibm,opal-sensor-power-supply"
-		"ibm,opal-sensor-power"
-- sensor-id: an opaque id provided by the firmware to the kernel, identifies a
-	     given sensor and its attribute data
-
-Example sensors node:
-
-cooling-fan#8-data {
-	sensor-id = <0x7052107>;
-	compatible = "ibm,opal-sensor-cooling-fan";
-};
-
-amb-temp#1-thrs {
-	sensor-id = <0x5096000>;
-	compatible = "ibm,opal-sensor-amb-temp";
-};
diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
index f5a6cc3efd33..be5c7d4579bb 100644
--- a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
+++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ADC-attached Hardware Sensor Device Tree Bindings
+title: ADC-attached Hardware Sensor
 
 maintainers:
   - Jonathan Cameron <jic23@kernel.org>
@@ -19,7 +19,7 @@ properties:
 
   io-channels:
     minItems: 1
-    maxItems: 8 # Should be enough
+    maxItems: 51 # Should be enough
     description: >
       List of phandles to ADC channels to read the monitoring values
 
@@ -31,7 +31,7 @@ additionalProperties: false
 
 examples:
   - |
-      iio-hwmon {
-          compatible = "iio-hwmon";
-          io-channels = <&adc 1>, <&adc 2>;
-      };
+    iio-hwmon {
+        compatible = "iio-hwmon";
+        io-channels = <&adc 1>, <&adc 2>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
deleted file mode 100644
index fa63b6171407..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ina3221.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Texas Instruments INA3221 Device Tree Bindings
-
-1) ina3221 node
-  Required properties:
-  - compatible: Must be "ti,ina3221"
-  - reg: I2C address
-
-  Optional properties:
-  - ti,single-shot: This chip has two power modes: single-shot (chip takes one
-                    measurement and then shuts itself down) and continuous (
-                    chip takes continuous measurements). The continuous mode is
-                    more reliable and suitable for hardware monitor type device,
-                    but the single-shot mode is more power-friendly and useful
-                    for battery-powered device which cares power consumptions
-                    while still needs some measurements occasionally.
-                    If this property is present, the single-shot mode will be
-                    used, instead of the default continuous one for monitoring.
-
-  = The node contains optional child nodes for three channels =
-  = Each child node describes the information of input source =
-
-  - #address-cells: Required only if a child node is present. Must be 1.
-  - #size-cells: Required only if a child node is present. Must be 0.
-
-2) child nodes
-  Required properties:
-  - reg: Must be 0, 1 or 2, corresponding to IN1, IN2 or IN3 port of INA3221
-
-  Optional properties:
-  - label: Name of the input source
-  - shunt-resistor-micro-ohms: Shunt resistor value in micro-Ohm
-
-Example:
-
-ina3221@40 {
-	compatible = "ti,ina3221";
-	reg = <0x40>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	input@0 {
-		reg = <0x0>;
-		status = "disabled";
-	};
-	input@1 {
-		reg = <0x1>;
-		shunt-resistor-micro-ohms = <5000>;
-	};
-	input@2 {
-		reg = <0x2>;
-		label = "VDD_5V";
-		shunt-resistor-micro-ohms = <5000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
index 0e49b3901161..bf3332153ad8 100644
--- a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
+++ b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/hwmon/jedec,jc42.yaml#
diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
index 010333cb25c0..966b221b6caa 100644
--- a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
+++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
@@ -11,11 +11,12 @@ maintainers:
 
 description: |
   This module is part of the sl28cpld multi-function device. For more
-  details see ../mfd/kontron,sl28cpld.yaml.
+  details see ../embedded-controller/kontron,sl28cpld.yaml.
 
 properties:
   compatible:
     enum:
+      - kontron,sa67mcu-hwmon
       - kontron,sl28cpld-fan
 
   reg:
diff --git a/Documentation/devicetree/bindings/hwmon/lantiq,cputemp.yaml b/Documentation/devicetree/bindings/hwmon/lantiq,cputemp.yaml
new file mode 100644
index 000000000000..9419b481ff35
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lantiq,cputemp.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lantiq,cputemp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq cpu temperature sensor
+
+maintainers:
+  - Florian Eckert <fe@dev.tdt.de>
+
+properties:
+  compatible:
+    const: lantiq,cputemp
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cputemp@103040 {
+        compatible = "lantiq,cputemp";
+        reg = <0x103040 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc2978.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc2978.yaml
new file mode 100644
index 000000000000..ea8b1553a3e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc2978.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc2978.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Octal Digital Power-supply monitor/supervisor/sequencer/margin controller.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - lltc,lt7170
+      - lltc,lt7171
+      - lltc,ltc2972
+      - lltc,ltc2974
+      - lltc,ltc2975
+      - lltc,ltc2977
+      - lltc,ltc2978
+      - lltc,ltc2979
+      - lltc,ltc2980
+      - lltc,ltc3880
+      - lltc,ltc3882
+      - lltc,ltc3883
+      - lltc,ltc3884
+      - lltc,ltc3886
+      - lltc,ltc3887
+      - lltc,ltc3889
+      - lltc,ltc7132
+      - lltc,ltc7841
+      - lltc,ltc7880
+      - lltc,ltm2987
+      - lltc,ltm4664
+      - lltc,ltm4673
+      - lltc,ltm4675
+      - lltc,ltm4676
+      - lltc,ltm4677
+      - lltc,ltm4678
+      - lltc,ltm4680
+      - lltc,ltm4686
+      - lltc,ltm4700
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: |
+      list of regulators provided by this controller.
+      Valid names of regulators depend on number of supplies supported per device:
+      * lt7170, lt7171 : vout0
+      * ltc2972 vout0 - vout1
+      * ltc2974, ltc2975 : vout0 - vout3
+      * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
+      * ltc2978 : vout0 - vout7
+      * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
+      * ltc7132 : vout0 - vout1
+      * ltc7841 : vout0
+      * ltc7880 : vout0 - vout1
+      * ltc3883 : vout0
+      * ltm4664 : vout0 - vout1
+      * ltm4673 : vout0 - vout3
+      * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
+      * ltm4680, ltm4686 : vout0 - vout1
+      * ltm4700 : vout0 - vout1
+
+    patternProperties:
+      "^vout[0-7]$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@5e {
+            compatible = "lltc,ltc2978";
+            reg = <0x5e>;
+
+            regulators {
+                vout0 {
+                     regulator-name = "FPGA-2.5V";
+                };
+                vout2 {
+                     regulator-name = "FPGA-1.5V";
+                };
+            };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
index 4b5851c326f7..8f0095bb7f6e 100644
--- a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/hwmon/lltc,ltc4151.yaml#
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: LTC4151 High Voltage I2C Current and Voltage Monitor
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
@@ -25,7 +25,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
new file mode 100644
index 000000000000..853df9fef6c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc4286.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC4286 power monitors
+
+maintainers:
+  - Delphine CC Chiu <Delphine_CC_Chiu@Wiwynn.com>
+
+properties:
+  compatible:
+    enum:
+      - lltc,ltc4286
+      - lltc,ltc4287
+
+  reg:
+    maxItems: 1
+
+  adi,vrange-low-enable:
+    description:
+      This property is a bool parameter to represent the
+      voltage range is 25.6 volts or 102.4 volts for this chip.
+      The default is 102.4 volts.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@40 {
+            compatible = "lltc,ltc4286";
+            reg = <0x40>;
+            adi,vrange-low-enable;
+            shunt-resistor-micro-ohms = <300>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
index 72980d083c21..0b9fda81e3ec 100644
--- a/Documentation/devicetree/bindings/hwmon/lm75.yaml
+++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/hwmon/lm75.yaml#
@@ -14,6 +14,8 @@ properties:
   compatible:
     enum:
       - adi,adt75
+      - ams,as6200
+      - atmel,at30ts74
       - dallas,ds1775
       - dallas,ds75
       - dallas,ds7505
@@ -26,6 +28,8 @@ properties:
       - maxim,max31725
       - maxim,max31726
       - maxim,mcp980x
+      - nxp,p3t1750
+      - nxp,p3t1755
       - nxp,pct2075
       - st,stds75
       - st,stlm75
@@ -47,11 +51,31 @@ properties:
   vs-supply:
     description: phandle to the regulator that provides the +VS supply
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ams,as6200
+                - ti,tmp100
+                - ti,tmp101
+                - ti,tmp112
+                - ti,tmp75
+    then:
+      properties:
+        interrupts: false
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -65,3 +89,17 @@ examples:
         vs-supply = <&vs>;
       };
     };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      temperature-sensor@48 {
+        compatible = "ams,as6200";
+        reg = <0x48>;
+        vs-supply = <&vs>;
+        interrupt-parent = <&gpio1>;
+        interrupts = <17 IRQ_TYPE_EDGE_BOTH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
deleted file mode 100644
index e1b79903f204..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm87.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-*LM87 hwmon sensor.
-
-Required properties:
-- compatible: Should be
-	"ti,lm87"
-
-- reg: I2C address
-
-optional properties:
-- has-temp3: This configures pins 18 and 19 to be used as a second
-             remote temperature sensing channel. By default the pins
-             are configured as voltage input pins in0 and in5.
-
-- has-in6: When set, pin 5 is configured to be used as voltage input
-           in6. Otherwise the pin is set as FAN1 input.
-
-- has-in7: When set, pin 6 is configured to be used as voltage input
-           in7. Otherwise the pin is set as FAN2 input.
-
-- vcc-supply: a Phandle for the regulator supplying power, can be
-              cofigured to measure 5.0V power supply. Default is 3.3V.
-
-Example:
-
-lm87@2e {
-	compatible = "ti,lm87";
-	reg = <0x2e>;
-	has-temp3;
-	vcc-supply = <&reg_5v0>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt
deleted file mode 100644
index 4e7f6215a453..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-ltc2978
-
-Required properties:
-- compatible: should contain one of:
-  * "lltc,ltc2972"
-  * "lltc,ltc2974"
-  * "lltc,ltc2975"
-  * "lltc,ltc2977"
-  * "lltc,ltc2978"
-  * "lltc,ltc2979"
-  * "lltc,ltc2980"
-  * "lltc,ltc3880"
-  * "lltc,ltc3882"
-  * "lltc,ltc3883"
-  * "lltc,ltc3884"
-  * "lltc,ltc3886"
-  * "lltc,ltc3887"
-  * "lltc,ltc3889"
-  * "lltc,ltc7880"
-  * "lltc,ltm2987"
-  * "lltc,ltm4664"
-  * "lltc,ltm4675"
-  * "lltc,ltm4676"
-  * "lltc,ltm4677"
-  * "lltc,ltm4678"
-  * "lltc,ltm4680"
-  * "lltc,ltm4686"
-  * "lltc,ltm4700"
-- reg: I2C slave address
-
-Optional properties:
-- regulators: A node that houses a sub-node for each regulator controlled by
-  the device. Each sub-node is identified using the node's name, with valid
-  values listed below. The content of each sub-node is defined by the
-  standard binding for regulators; see regulator.txt.
-
-Valid names of regulators depend on number of supplies supported per device:
-  * ltc2972 vout0 - vout1
-  * ltc2974, ltc2975 : vout0 - vout3
-  * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
-  * ltc2978 : vout0 - vout7
-  * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
-  * ltc7880 : vout0 - vout1
-  * ltc3883 : vout0
-  * ltm4664 : vout0 - vout1
-  * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
-  * ltm4680, ltm4686 : vout0 - vout1
-  * ltm4700 : vout0 - vout1
-
-Example:
-ltc2978@5e {
-	compatible = "lltc,ltc2978";
-	reg = <0x5e>;
-	regulators {
-		vout0 {
-			regulator-name = "FPGA-2.5V";
-		};
-		vout2 {
-			regulator-name = "FPGA-1.5V";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt b/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt
deleted file mode 100644
index 33fd00a987c7..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ltq-cputemp.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-Lantiq cpu temperatur sensor
-
-Requires node properties:
-- compatible value :
-	"lantiq,cputemp"
-
-Example:
-	cputemp@0 {
-		compatible = "lantiq,cputemp";
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/max31785.txt b/Documentation/devicetree/bindings/hwmon/max31785.txt
deleted file mode 100644
index 106e08c56aaa..000000000000
--- a/Documentation/devicetree/bindings/hwmon/max31785.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Bindings for the Maxim MAX31785 Intelligent Fan Controller
-==========================================================
-
-Reference:
-
-https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
-
-The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan
-management with temperature and remote voltage sensing. Various fan control
-features are provided, including PWM frequency control, temperature hysteresis,
-dual tachometer measurements, and fan health monitoring.
-
-Required properties:
-- compatible     : One of "maxim,max31785" or "maxim,max31785a"
-- reg            : I2C address, one of 0x52, 0x53, 0x54, 0x55.
-
-Example:
-
-        fans@52 {
-                compatible = "maxim,max31785";
-                reg = <0x52>;
-        };
diff --git a/Documentation/devicetree/bindings/hwmon/max6650.txt b/Documentation/devicetree/bindings/hwmon/max6650.txt
deleted file mode 100644
index f6bd87d8e284..000000000000
--- a/Documentation/devicetree/bindings/hwmon/max6650.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Bindings for MAX6651 and MAX6650 I2C fan controllers
-
-Reference:
-[1]	https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
-
-Required properties:
-- compatible : One of "maxim,max6650" or "maxim,max6651"
-- reg        : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48.
-
-Optional properties, default is to retain the chip's current setting:
-- maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or
-			12000000 uV.
-- maxim,fan-prescale  : Pre-scaling value, as per datasheet [1]. Lower values
-			allow more fine-grained control of slower fans.
-			Valid: 1, 2, 4, 8, 16.
-- maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the
-			driver selects closed-loop mode and the requested speed.
-			This ensures the fan is already running before userspace
-			takes over.
-
-Example:
-	fan-max6650: max6650@1b {
-		reg = <0x1b>;
-		compatible = "maxim,max6650";
-		maxim,fan-microvolt = <12000000>;
-		maxim,fan-prescale = <4>;
-		maxim,fan-target-rpm = <1200>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml
index 93e86e3b4602..8588d97ba6ec 100644
--- a/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max20730.yaml
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/hwmon/maxim,max20730.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
@@ -26,6 +25,7 @@ description: |
 properties:
   compatible:
     enum:
+      - maxim,max20710
       - maxim,max20730
       - maxim,max20734
       - maxim,max20743
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
new file mode 100644
index 000000000000..558cbd251b0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/maxim,max31790.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The Maxim MAX31790 Fan Controller
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+  - Chanh Nguyen <chanh@os.amperecomputing.com>
+
+description: >
+  The MAX31790 controls the speeds of up to six fans using six
+  independent PWM outputs. The desired fan speeds (or PWM duty cycles)
+  are written through the I2C interface.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX31790.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max31785
+      - maxim,max31785a
+      - maxim,max31785b
+      - maxim,max31790
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  "#pwm-cells":
+    const: 1
+
+patternProperties:
+  "^fan@[0-9]+$":
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pwm_provider: fan-controller@20 {
+        compatible = "maxim,max31790";
+        reg = <0x20>;
+        clocks = <&sys_clk>;
+        resets = <&reset 0>;
+        #address-cells = <1>;
+        #pwm-cells = <1>;
+        #size-cells = <0>;
+
+        fan@0 {
+          reg = <0x0>;
+          pwms = <&pwm_provider 1>;
+        };
+
+        fan@1 {
+          reg = <0x1>;
+          pwms = <&pwm_provider 2>;
+        };
+      };
+    };
+
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml
new file mode 100644
index 000000000000..139a95e00fe5
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max6639.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/maxim,max6639.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim max6639
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+
+description: |
+  The MAX6639 is a 2-channel temperature monitor with dual, automatic, PWM
+  fan-speed controller.  It monitors its own temperature and one external
+  diode-connected transistor or the temperatures of two external diode-connected
+  transistors, typically available in CPUs, FPGAs, or GPUs.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max6639
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#pwm-cells':
+    const: 3
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^fan@[0-1]$":
+    type: object
+    description:
+      Represents the two fans and their specific configuration.
+
+    $ref: fan-common.yaml#
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          The fan number.
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan1: fan-controller@10 {
+            compatible = "maxim,max6639";
+            reg = <0x10>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #pwm-cells = <3>;
+
+            fan@0 {
+                reg = <0x0>;
+                pulses-per-revolution = <2>;
+                max-rpm = <4000>;
+                target-rpm = <1000>;
+                pwms = <&fan1 0 25000 0>;
+            };
+
+            fan@1 {
+                reg = <0x1>;
+                pulses-per-revolution = <2>;
+                max-rpm = <8000>;
+                pwms = <&fan1 1 25000 0>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml
new file mode 100644
index 000000000000..24c7697fdc1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/maxim,max6650.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/maxim,max6650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX6650 and MAX6651 I2C Fan Controllers
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  The MAX6650 and MAX6651 regulate and monitor the speed
+  of 5VDC/12VDC burshless fans with built-in tachometers.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max6650
+      - maxim,max6651
+
+  reg:
+    maxItems: 1
+
+  maxim,fan-microvolt:
+    description:
+      The supply voltage of the fan, either 5000000 uV or
+      12000000 uV.
+    enum: [5000000, 12000000]
+
+  maxim,fan-prescale:
+    description:
+      Pre-scaling value, as per datasheet. Lower values
+      allow more fine-grained control of slower fans.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16]
+
+  maxim,fan-target-rpm:
+    description:
+      Initial requested fan rotation speed. If specified, the
+      driver selects closed-loop mode and the requested speed.
+      This ensures the fan is already running before userspace
+      takes over.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 30000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan-controller@1b {
+            compatible = "maxim,max6650";
+            reg = <0x1b>;
+            maxim,fan-microvolt = <12000000>;
+            maxim,fan-prescale = <4>;
+            maxim,fan-target-rpm = <1200>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,emc2305.yaml b/Documentation/devicetree/bindings/hwmon/microchip,emc2305.yaml
new file mode 100644
index 000000000000..d3f06ebc19fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,emc2305.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,emc2305.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip EMC2305 SMBus compliant PWM fan controller
+
+maintainers:
+  - Michael Shych <michaelsh@nvidia.com>
+
+description:
+  Microchip EMC2301/2/3/5 pwm controller which supports up to five programmable
+  fan control circuits.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - microchip,emc2305
+      - items:
+          - enum:
+              - microchip,emc2303
+              - microchip,emc2302
+              - microchip,emc2301
+          - const: microchip,emc2305
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#pwm-cells':
+    const: 3
+    description: |
+      Number of cells in a PWM specifier.
+      - cell 0: The PWM frequency
+      - cell 1: The PWM polarity: 0 or PWM_POLARITY_INVERTED
+      - cell 2: The PWM output config:
+           - 0 (Open-Drain)
+           - 1 (Push-Pull)
+
+patternProperties:
+  '^fan@[0-4]$':
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        description:
+          The fan number used to determine the associated PWM channel.
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pwm/pwm.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan_controller: fan-controller@2f {
+            compatible = "microchip,emc2305";
+            reg = <0x2f>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #pwm-cells = <3>;
+
+            fan@0 {
+                reg = <0x0>;
+                pwms = <&fan_controller 26000 PWM_POLARITY_INVERTED 1>;
+                #cooling-cells = <2>;
+            };
+
+            fan@1 {
+                reg = <0x1>;
+                pwms = <&fan_controller 26000 0 1>;
+                #cooling-cells = <2>;
+            };
+
+            fan@2 {
+                reg = <0x2>;
+                pwms = <&fan_controller 26000 0 1>;
+                #cooling-cells = <2>;
+            };
+
+            fan@3 {
+                reg = <0x3>;
+                pwms = <&fan_controller 26000 0 1>;
+                #cooling-cells = <2>;
+            };
+
+            fan@4 {
+                reg = <0x4>;
+                pwms = <&fan_controller 26000 0 1>;
+                #cooling-cells = <2>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml
new file mode 100644
index 000000000000..390dd6755ff5
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,lan966x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966x Hardware Monitor
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  Microchip LAN966x temperature monitor and fan controller
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan9668-hwmon
+
+  reg:
+    items:
+      - description: PVT registers
+      - description: FAN registers
+
+  reg-names:
+    items:
+      - const: pvt
+      - const: fan
+
+  clocks:
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon: hwmon@e2010180 {
+        compatible = "microchip,lan9668-hwmon";
+        reg = <0xe2010180 0xc>,
+              <0xe20042a8 0xc>;
+        reg-names = "pvt", "fan";
+        clocks = <&sys_clk>;
+        #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
index c42051f8a191..f5e104c1b0d0 100644
--- a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
+++ b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/hwmon/microchip,mcp3021.yaml#
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Microchip MCP3021 A/D converter
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
index 76be625d5646..51e8619dbf3c 100644
--- a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
+++ b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
@@ -22,7 +22,7 @@ properties:
 
   clocks:
     items:
-      - description: AHB reference clock
+      - description: System reference clock
 
   '#thermal-sensor-cells':
     const: 0
@@ -40,5 +40,5 @@ examples:
         compatible = "microchip,sparx5-temp";
         reg = <0x10508110 0xc>;
         #thermal-sensor-cells = <0>;
-        clocks = <&ahb_clk>;
+        clocks = <&sys_clk>;
     };
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index b79f069a04c2..56db2292f062 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -4,11 +4,37 @@
 $id: http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Moortec Semiconductor MR75203 PVT Controller bindings
+title: Moortec Semiconductor MR75203 PVT Controller
 
 maintainers:
   - Rahul Tanwar <rtanwar@maxlinear.com>
 
+description: |
+  A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can
+  include many different units.
+  Such a design will usually consists of several Moortec's embedded analog IPs,
+  and a single Moortec controller (mr75203) to configure and control the IPs.
+
+  Some of the Moortec's analog hard IPs that can be used in a design:
+  *) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137).
+  *) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138).
+  *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139).
+  *) Delay Chain - ring oscillator connected to the PD, used to measure IO
+     based transistors (e.g. mr76008 ring oscillator at 1.1V, mr76007 ring
+     oscillator at 1.8V).
+  *) Pre Scaler - provides divide-by-X scaling of input voltage, which can then
+     be presented for VM for measurement within its range (e.g. mr76006 -
+     divide by 2 pre-scaler).
+
+  TS, VM & PD also include a digital interface, which consists of configuration
+  inputs and measurement outputs.
+
+  Some of the units have number of series, each series can have slightly
+  different characteristics.
+
+  The mr75203 binding describes configuration for the controller unit, but also
+  for some of the analog IPs.
+
 properties:
   compatible:
     const: moortec,mr75203
@@ -16,7 +42,7 @@ properties:
   reg:
     items:
       - description: PVT common registers
-      - description: PVT temprature sensor registers
+      - description: PVT temperature sensor registers
       - description: PVT process detector registers
       - description: PVT voltage monitor registers
 
@@ -44,13 +70,76 @@ properties:
   "#thermal-sensor-cells":
     const: 1
 
+  moortec,vm-active-channels:
+    description:
+      Defines the number of channels per VM that are actually used and are
+      connected to some input source.
+      Maximum number of items - number of VMs.
+      Maximum value of each item - number of channels.
+      Minimum value of each item - 0 (which means entire VM sensor is not used).
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,vm-pre-scaler-x2:
+    description:
+      Defines the channels that use a mr76006 pre-scaler to divide the input
+      source by 2.
+      The pre-scaler is used for input sources that exceed the VM input range.
+      The driver uses this information to present to the user with the actual
+      value of the voltage source.
+      For channels that are not listed, no pre-scaler is assumed.
+      Maximum number of items - total number of channels in all VMs.
+      Each channel should not appear more than once.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,ts-series:
+    description:
+      Definition of the temperature equation and coefficients that shall be
+      used to convert the digital output to value in milli-Celsius.
+    minimum: 5
+    maximum: 6
+    default: 5
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-g:
+    description:
+      G coefficient for temperature equation.
+      Default for series 5 = 60000
+      Default for series 6 = 57400
+    multipleOf: 100
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-h:
+    description:
+      H coefficient for temperature equation.
+      Default for series 5 = 200000
+      Default for series 6 = 249400
+    multipleOf: 100
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-cal5:
+    description:
+      cal5 coefficient for temperature equation.
+      Default for series 5 = 4094
+      Default for series 6 = 4096
+    minimum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-j:
+    description:
+      J coefficient for temperature equation.
+      Default for series 5 = -100
+      Default for series 6 = 0
+    multipleOf: 100
+    maximum: 0
+    $ref: /schemas/types.yaml#/definitions/int32
+
 required:
   - compatible
   - reg
   - reg-names
-  - intel,vm-map
   - clocks
-  - resets
   - "#thermal-sensor-cells"
 
 additionalProperties: false
@@ -67,5 +156,9 @@ examples:
         intel,vm-map = [03 01 04 ff ff];
         clocks = <&osc0>;
         resets = <&rcu0 0x40 7>;
+        moortec,vm-active-channels = /bits/ 8 <0x10 0x05>;
+        moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>;
+        moortec,ts-coeff-g = <61400>;
+        moortec,ts-coeff-h = <253700>;
         #thermal-sensor-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
index 6e1d54ff5d5b..164068ba069d 100644
--- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
+++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/hwmon/national,lm90.yaml#
@@ -16,9 +16,11 @@ properties:
       - adi,adm1032
       - adi,adt7461
       - adi,adt7461a
+      - adi,adt7481
       - dallas,max6646
       - dallas,max6647
       - dallas,max6649
+      - dallas,max6654
       - dallas,max6657
       - dallas,max6658
       - dallas,max6659
@@ -31,12 +33,18 @@ properties:
       - national,lm89
       - national,lm90
       - national,lm99
+      - nuvoton,nct7716
+      - nuvoton,nct7717
+      - nuvoton,nct7718
       - nxp,sa56004
+      - onnn,nct72
+      - onnn,nct214
+      - onnn,nct218
       - onnn,nct1008
       - ti,tmp451
+      - ti,tmp461
       - winbond,w83l771
 
-
   interrupts:
     items:
       - description: |
@@ -49,18 +57,144 @@ properties:
   "#thermal-sensor-cells":
     const: 1
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
   vcc-supply:
     description: phandle to the regulator that provides the +VCC supply
 
+  ti,extended-range-enable:
+    description: Set to enable extended range temperature.
+    type: boolean
+
 required:
   - compatible
   - reg
 
+patternProperties:
+  "^channel@([0-2])$":
+    type: object
+    description: Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: The channel number. 0 is local channel, 1-2 are remote channels.
+        items:
+          minimum: 0
+          maximum: 2
+
+      label:
+        description: A descriptive name for this channel, like "ambient" or "psu".
+
+      temperature-offset-millicelsius:
+        description: Temperature offset to be added to or subtracted from remote temperature measurements.
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,adt7461
+                - adi,adt7461a
+                - adi,adt7481
+                - ti,tmp451
+                - ti,tmp461
+    then:
+      properties:
+        ti,extended-range-enable: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dallas,max6646
+              - dallas,max6647
+              - dallas,max6649
+              - dallas,max6654
+              - dallas,max6657
+              - dallas,max6658
+              - dallas,max6659
+              - dallas,max6695
+              - dallas,max6696
+              - nuvoton,nct7716
+              - nuvoton,nct7717
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adt7461
+              - adi,adt7461a
+              - adi,adt7481
+              - onnn,nct72
+              - onnn,nct214
+              - onnn,nct218
+              - onnn,nct1008
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127750
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1032
+              - dallas,max6680
+              - dallas,max6681
+              - gmt,g781
+              - national,lm86
+              - national,lm89
+              - national,lm90
+              - national,lm99
+              - nuvoton,nct7718
+              - nxp,sa56004
+              - winbond,w83l771
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127875
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp451
+              - ti,tmp461
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127937
+
 additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/gpio/tegra-gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c {
@@ -71,8 +205,36 @@ examples:
             compatible = "onnn,nct1008";
             reg = <0x4c>;
             vcc-supply = <&palmas_ldo6_reg>;
-            interrupt-parent = <&gpio>;
-            interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
             #thermal-sensor-cells = <1>;
         };
     };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@4c {
+            compatible = "adi,adt7481";
+            reg = <0x4c>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0x0>;
+                label = "local";
+            };
+
+            channel@1 {
+                reg = <0x1>;
+                label = "front";
+                temperature-offset-millicelsius = <4000>;
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                label = "back";
+                temperature-offset-millicelsius = <750>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt
index 28f43e929f6d..18095ba87a5a 100644
--- a/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/npcm750-pwm-fan.txt
@@ -1,12 +1,16 @@
-Nuvoton NPCM7xx PWM and Fan Tacho controller device
+Nuvoton NPCM PWM and Fan Tacho controller device
 
 The Nuvoton BMC NPCM7XX supports 8 Pulse-width modulation (PWM)
 controller outputs and 16 Fan tachometer controller inputs.
 
+The Nuvoton BMC NPCM8XX supports 12 Pulse-width modulation (PWM)
+controller outputs and 16 Fan tachometer controller inputs.
+
 Required properties for pwm-fan node
 - #address-cells : should be 1.
 - #size-cells	: should be 0.
 - compatible	: "nuvoton,npcm750-pwm-fan" for Poleg NPCM7XX.
+				: "nuvoton,npcm845-pwm-fan" for Arbel NPCM8XX.
 - reg			: specifies physical base address and size of the registers.
 - reg-names	: must contain:
 					* "pwm" for the PWM registers.
@@ -23,7 +27,7 @@ Required properties for pwm-fan node
 fan subnode format:
 ===================
 Under fan subnode can be upto 8 child nodes, each child node representing a fan.
-Each fan subnode must have one PWM channel and atleast one Fan tach channel.
+Each fan subnode must have one PWM channel and at least one Fan tach channel.
 
 For PWM channel can be configured cooling-levels to create cooling device.
 Cooling device could be bound to a thermal zone for the thermal control.
diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
index 9e77cee07dbc..dc8bc4c6df34 100644
--- a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
@@ -6,7 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: NTC thermistor temperature sensors
 
 maintainers:
-  - Naveen Krishna Chatradhi <ch.naveen@samsung.com>
   - Linus Walleij <linus.walleij@linaro.org>
 
 description: |
@@ -76,7 +75,9 @@ properties:
       - const: murata,ncp15wl333
       - const: murata,ncp03wf104
       - const: murata,ncp15xh103
-      # Deprecated "ntp," compatible strings
+      - const: murata,ncp18wm474
+      - const: samsung,1404-001221
+      # Deprecated "ntc," compatible strings
       - const: ntc,ncp15wb473
         deprecated: true
       - const: ntc,ncp18wb473
@@ -131,7 +132,7 @@ additionalProperties: false
 
 examples:
   - |
-    thermistor0 {
+    thermistor {
       compatible = "murata,ncp18wb473";
       io-channels = <&gpadc 0x06>;
       pullup-uv = <1800000>;
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
new file mode 100644
index 000000000000..244470282890
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/nuvoton,nct6775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NCT6775 and compatible Super I/O chips
+
+maintainers:
+  - Zev Weiss <zev@bewilderbeest.net>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct6106
+      - nuvoton,nct6116
+      - nuvoton,nct6775
+      - nuvoton,nct6776
+      - nuvoton,nct6779
+      - nuvoton,nct6791
+      - nuvoton,nct6792
+      - nuvoton,nct6793
+      - nuvoton,nct6795
+      - nuvoton,nct6796
+      - nuvoton,nct6797
+      - nuvoton,nct6798
+      - nuvoton,nct6799
+
+  reg:
+    maxItems: 1
+
+  nuvoton,tsi-channel-mask:
+    description:
+      Bitmask indicating which TSI temperature sensor channels are
+      active.  LSB is TSI0, bit 1 is TSI1, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0xff
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        superio@4d {
+            compatible = "nuvoton,nct6779";
+            reg = <0x4d>;
+            nuvoton,tsi-channel-mask = <0x03>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7363.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7363.yaml
new file mode 100644
index 000000000000..625fcf5d3b54
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7363.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/nuvoton,nct7363.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NCT7363Y Hardware Monitoring IC
+
+maintainers:
+  - Ban Feng <kcfeng0@nuvoton.com>
+
+description: |
+  The NCT7363Y is a fan controller which provides up to 16 independent
+  FAN input monitors, and up to 16 independent PWM outputs with SMBus interface.
+
+  Datasheets: Available from Nuvoton upon request
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct7363
+      - nuvoton,nct7362
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+patternProperties:
+  "^fan-[0-9]+$":
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+    required:
+      - pwms
+      - tach-ch
+
+required:
+  - compatible
+  - reg
+  - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon: hwmon@22 {
+            compatible = "nuvoton,nct7363";
+            reg = <0x22>;
+            #pwm-cells = <2>;
+
+            fan-0 {
+                pwms = <&hwmon 0 50000>;
+                tach-ch = /bits/ 8 <0x00>;
+            };
+            fan-1 {
+                pwms = <&hwmon 1 50000>;
+                tach-ch = /bits/ 8 <0x01>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
index 2f0620ecccc9..c16a33227e94 100644
--- a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/hwmon/nuvoton,nct7802.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
@@ -123,23 +122,23 @@ examples:
             #size-cells = <0>;
 
             channel@0 { /* LTD */
-              reg = <0>;
+                reg = <0>;
             };
 
             channel@1 { /* RTD1 */
-              reg = <1>;
-              sensor-type = "voltage";
+                reg = <1>;
+                sensor-type = "voltage";
             };
 
             channel@2 { /* RTD2 */
-              reg = <2>;
-              sensor-type = "temperature";
-              temperature-mode = "thermal-diode";
+                reg = <2>;
+                sensor-type = "temperature";
+                temperature-mode = "thermal-diode";
             };
 
             channel@3 { /* RTD3 */
-              reg = <3>;
-              sensor-type = "temperature";
+                reg = <3>;
+                sensor-type = "temperature";
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml
new file mode 100644
index 000000000000..48d654e52114
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/nxp,mc34vr500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP MC34VR500 hwmon sensor
+
+maintainers:
+  - Mario Kicherer <dev@kicherer.org>
+
+properties:
+  compatible:
+    enum:
+      - nxp,mc34vr500
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@8 {
+        compatible = "nxp,mc34vr500";
+        reg = <0x08>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml
new file mode 100644
index 000000000000..af7530093942
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,adp1050.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/adi,adp1050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP1050 digital controller with PMBus interface
+
+maintainers:
+  - Radu Sabau <radu.sabau@analog.com>
+
+description: |
+   The ADP1050 and similar devices are used to monitor system voltages,
+   currents, power, and temperatures.
+
+   Through the PMBus interface, the ADP1050 targets isolated power supplies
+   and has four individual monitors for input/output voltage, input current
+   and temperature.
+   Datasheet:
+     https://www.analog.com/en/products/adp1050.html
+     https://www.analog.com/en/products/adp1051.html
+     https://www.analog.com/en/products/adp1055.html
+     https://www.analog.com/en/products/ltp8800-1a.html
+     https://www.analog.com/en/products/ltp8800-2.html
+     https://www.analog.com/en/products/ltp8800-4a.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adp1050
+      - adi,adp1051
+      - adi,adp1055
+      - adi,ltp8800
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+
+        hwmon@70 {
+            compatible = "adi,adp1050";
+            reg = <0x70>;
+            vcc-supply = <&vcc>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,lt3074.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,lt3074.yaml
new file mode 100644
index 000000000000..bf028a8718f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,lt3074.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/adi,lt3074.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LT3074 voltage regulator
+
+maintainers:
+  - Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
+
+description: |
+  The LT3074 is a low voltage, ultra-low noise and ultra-fast transient
+  response linear regulator. It allows telemetry for input/output voltage,
+  output current and temperature through the PMBus serial interface.
+
+  Datasheet:
+    https://www.analog.com/en/products/lt3074.html
+
+allOf:
+  - $ref: /schemas/regulator/regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,lt3074
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@6d {
+            compatible = "adi,lt3074";
+            reg = <0x6d>;
+            regulator-name = "vout";
+            regulator-max-microvolt = <1250000>;
+            regulator-min-microvolt = <1150000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,max17616.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max17616.yaml
new file mode 100644
index 000000000000..fa48af81e083
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max17616.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/adi,max17616.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX17616/MAX17616A Current-Limiter with PMBus Interface
+
+maintainers:
+  - Kim Seer Paller <kimseer.paller@analog.com>
+
+description: |
+  The MAX17616/MAX17616A is a 3V to 80V, 7A current-limiter with overvoltage,
+  surge, undervoltage, reverse polarity, and loss of ground protection. It allows
+  monitoring of input/output voltage, output current and temperature through the
+  PMBus serial interface.
+  Datasheet:
+    https://www.analog.com/en/products/max17616.html
+
+properties:
+  compatible:
+    const: adi,max17616
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+  interrupts:
+    description: Fault condition signal provided on SMBALERT pin.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@16 {
+            compatible = "adi,max17616";
+            reg = <0x16>;
+            vcc-supply = <&vcc>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
new file mode 100644
index 000000000000..5c4e52b472ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/infineon,tda38640.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/infineon,tda38640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon TDA38640 Synchronous Buck Regulator with SVID and I2C
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+
+description: |
+  The Infineon TDA38640 is a 40A Single-voltage Synchronous Buck
+  Regulator with SVID and I2C designed for Industrial use.
+
+  Datasheet: https://www.infineon.com/dgdl/Infineon-TDA38640-0000-DataSheet-v02_04-EN.pdf?fileId=8ac78c8c80027ecd018042f2337f00c9
+
+properties:
+  compatible:
+    enum:
+      - infineon,tda38640
+
+  reg:
+    maxItems: 1
+
+  infineon,en-pin-fixed-level:
+    description:
+      Indicates that the chip EN pin is at fixed level or left
+      unconnected(has internal pull-down).
+    type: boolean
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tda38640@40 {
+            compatible = "infineon,tda38640";
+            reg = <0x40>;
+
+            interrupt-parent = <&smb_pex_cpu0_event>;
+            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                pvnn_main_cpu0: vout {
+                    regulator-name = "pvnn_main_cpu0";
+                    regulator-enable-ramp-delay = <200>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/isil,isl68137.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/isil,isl68137.yaml
new file mode 100644
index 000000000000..ae23a05375cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/isil,isl68137.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/isil,isl68137.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Digital Multiphase Voltage Regulators with PMBus
+
+maintainers:
+  - Grant Peltier <grant.peltier.jg@renesas.com>
+
+description: |
+  Renesas digital multiphase voltage regulators with PMBus.
+  https://www.renesas.com/en/products/power-management/multiphase-power/multiphase-dcdc-switching-controllers
+
+properties:
+  compatible:
+    enum:
+      - isil,isl68137
+      - renesas,isl68220
+      - renesas,isl68221
+      - renesas,isl68222
+      - renesas,isl68223
+      - renesas,isl68224
+      - renesas,isl68225
+      - renesas,isl68226
+      - renesas,isl68227
+      - renesas,isl68229
+      - renesas,isl68233
+      - renesas,isl68239
+      - renesas,isl69222
+      - renesas,isl69223
+      - renesas,isl69224
+      - renesas,isl69225
+      - renesas,isl69227
+      - renesas,isl69228
+      - renesas,isl69234
+      - renesas,isl69236
+      - renesas,isl69239
+      - renesas,isl69242
+      - renesas,isl69243
+      - renesas,isl69247
+      - renesas,isl69248
+      - renesas,isl69254
+      - renesas,isl69255
+      - renesas,isl69256
+      - renesas,isl69259
+      - isil,isl69260
+      - renesas,isl69268
+      - isil,isl69269
+      - renesas,isl69298
+      - renesas,raa228000
+      - renesas,raa228004
+      - renesas,raa228006
+      - renesas,raa228228
+      - renesas,raa228244
+      - renesas,raa228246
+      - renesas,raa229001
+      - renesas,raa229004
+      - renesas,raa229621
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-3])$":
+    type: object
+    description:
+      Container for properties specific to a particular channel (rail).
+
+    properties:
+      reg:
+        description: The channel (rail) index.
+        items:
+          minimum: 0
+          maximum: 3
+
+      vout-voltage-divider:
+        description: |
+          Resistances of a voltage divider placed between Vout and the voltage
+          sense (Vsense) pin for the given channel (rail). It has two numbers
+          representing the resistances of the voltage divider provided as
+          <Rout Rtotal> which yields an adjusted Vout as
+          Vout_adj = Vout * Rtotal / Rout given the original Vout as reported
+          by the Vsense pin. Given a circuit configuration similar to the one
+          below, Rtotal = R1 + Rout.
+
+            Vout ----.
+                     |
+                  .-----.
+                  | R1  |
+                  '-----'
+                     |
+                     +---- Vsense
+                     |
+                  .-----.
+                  | Rout|
+                  '-----'
+                     |
+                    GND
+
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 2
+        maxItems: 2
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      isl68239@60 {
+        compatible = "isil,isl68137";
+        reg = <0x60>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      isl68239@60 {
+        compatible = "renesas,isl68239";
+        reg = <0x60>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          vout-voltage-divider = <1000 2000>;  // Reported Vout/Pout would be scaled by 2
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/mps,mp2975.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/mps,mp2975.yaml
new file mode 100644
index 000000000000..f7bc4f077929
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/mps,mp2975.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/mps,mp2975.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MPS MP2975 Synchronous Buck Regulator
+
+maintainers:
+  - Naresh Solanki <naresh.solanki@9elements.com>
+
+description:
+  The MPS MP2971, MP2973 & MP2975 is a multi-phase voltage regulator
+  designed for use in high-performance computing and server
+  applications. It supports I2C/PMBus for control and monitoring.
+
+properties:
+  compatible:
+    enum:
+      - mps,mp2971
+      - mps,mp2973
+      - mps,mp2975
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      List of regulators provided by this controller.
+
+    patternProperties:
+      "^vout[0-1]$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@58 {
+            compatible = "mps,mp2973";
+            reg = <0x58>;
+
+            interrupt-parent = <&smb_pex_cpu1_event>;
+            interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                vout0 {
+                    regulator-name = "pvccin_cpu1";
+                    regulator-enable-ramp-delay = <200>;
+                };
+                vout1 {
+                    regulator-name = "pvccfa_ehv_fivra_cpu1";
+                    regulator-enable-ramp-delay = <200>;
+                };
+            };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/mps,mpq8785.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/mps,mpq8785.yaml
new file mode 100644
index 000000000000..90970a0433e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/mps,mpq8785.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/mps,mpq8785.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power Systems Multiphase Voltage Regulators with PMBus
+
+maintainers:
+  - Charles Hsu <ythsu0511@gmail.com>
+
+description:
+  Monolithic Power Systems digital multiphase voltage regulators with PMBus.
+
+properties:
+  compatible:
+    enum:
+      - mps,mpm3695
+      - mps,mpm3695-25
+      - mps,mpm82504
+      - mps,mpq8785
+
+  reg:
+    maxItems: 1
+
+  mps,vout-fb-divider-ratio-permille:
+    description:
+      The feedback resistor divider ratio, expressed in permille
+      (Vfb / Vout * 1000). This value is written to the PMBUS_VOUT_SCALE_LOOP
+      register and is required for correct output voltage presentation.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4095
+    default: 706
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mps,mpm3695
+            - mps,mpm82504
+    then:
+      properties:
+        mps,vout-fb-divider-ratio-permille:
+          maximum: 1023
+
+  - if:
+      properties:
+        compatible:
+          const: mps,mpq8785
+    then:
+      properties:
+        mps,vout-fb-divider-ratio-permille:
+          maximum: 2047
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@30 {
+        compatible = "mps,mpm82504";
+        reg = <0x30>;
+        mps,vout-fb-divider-ratio-permille = <600>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
index da8292bc32f5..a20f140dc79a 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
@@ -34,11 +34,26 @@ properties:
       Shunt (sense) resistor value in micro-Ohms
     default: 1000
 
+  regulators:
+    type: object
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/hwmon/hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml
new file mode 100644
index 000000000000..f4115870e450
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/ti,tps25990.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TPS25990 Stackable eFuse
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+description:
+  The TI TPS25990 is an integrated, high-current circuit
+  protection and power management device with PMBUS interface
+
+properties:
+  compatible:
+    const: ti,tps25990
+
+  reg:
+    maxItems: 1
+
+  ti,rimon-micro-ohms:
+    description:
+      micro Ohms value of the resistance installed between the Imon pin
+      and the ground reference.
+
+  interrupts:
+    description: PMBUS SMB Alert Interrupt.
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vout:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      gpdac1:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      gpdac2:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ti,rimon-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hw-monitor@46 {
+            compatible = "ti,tps25990";
+            reg = <0x46>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <42 IRQ_TYPE_LEVEL_LOW>;
+            ti,rimon-micro-ohms = <1370000000>;
+
+            regulators {
+                cpu0_vout: vout {
+                    regulator-name = "main_cpu0";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
index e8feee38c76c..8f9ce00079df 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
@@ -23,11 +23,26 @@ description: |
 properties:
   compatible:
     enum:
+      - ti,ucd9000
+      - ti,ucd9090
+      - ti,ucd90120
+      - ti,ucd90124
+      - ti,ucd90160
       - ti,ucd90320
+      - ti,ucd90910
 
   reg:
     maxItems: 1
 
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 84
+    maxItems: 84
+
+  '#gpio-cells':
+    const: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/vicor,pli1209bc.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/vicor,pli1209bc.yaml
new file mode 100644
index 000000000000..4aa62d67e1a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/vicor,pli1209bc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/vicor,pli1209bc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vicor PLI1209BC Power Regulator
+
+maintainers:
+  - Marcello Sylvester Bauer <sylv@sylv.io>
+  - Naresh Solanki <naresh.solanki@9elements.com>
+
+description:
+  The Vicor PLI1209BC is a Digital Supervisor with Isolation for use
+  with BCM Bus Converter Modules.
+
+properties:
+  compatible:
+    enum:
+      - vicor,pli1209bc
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      List of regulators provided by this controller.
+
+    properties:
+      vout2:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@5f {
+            compatible = "vicor,pli1209bc";
+            reg = <0x5f>;
+
+            regulators {
+                p12v_d: vout2 {
+                    regulator-name = "bcm3";
+                    regulator-boot-on;
+                };
+            };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
deleted file mode 100644
index 4509e688623a..000000000000
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Bindings for a fan connected to the PWM lines
-
-Required properties:
-- compatible	: "pwm-fan"
-- pwms		: the PWM that is used to control the PWM fan
-- cooling-levels      : PWM duty cycle values in a range from 0 to 255
-			which correspond to thermal cooling states
-
-Optional properties:
-- fan-supply		: phandle to the regulator that provides power to the fan
-- interrupts		: This contains an interrupt specifier for each fan
-			  tachometer output connected to an interrupt source.
-			  The output signal must generate a defined number of
-			  interrupts per fan revolution, which require that
-			  it must be self resetting edge interrupts. See
-			  interrupt-controller/interrupts.txt for the format.
-- pulses-per-revolution : define the number of pulses per fan revolution for
-			  each tachometer input as an integer (default is 2
-			  interrupts per revolution). The value must be
-			  greater than zero.
-
-Example:
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		#cooling-cells = <2>;
-		pwms = <&pwm 0 10000 0>;
-		cooling-levels = <0 102 170 230>;
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			     thermal-sensors = <&tmu 0>;
-			     polling-delay-passive = <0>;
-			     polling-delay = <0>;
-			     trips {
-					cpu_alert1: cpu-alert1 {
-						    temperature = <100000>; /* millicelsius */
-						    hysteresis = <2000>; /* millicelsius */
-						    type = "passive";
-					};
-			     };
-			     cooling-maps {
-					map0 {
-						    trip = <&cpu_alert1>;
-						    cooling-device = <&fan0 0 1>;
-					};
-			     };
-		};
-
-Example 2:
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm 0 40000 0>;
-		fan-supply = <&reg_fan>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		pulses-per-revolution = <2>;
-	};
-
-Example 3:
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm1 0 25000 0>;
-		interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>,
-			<&gpio2 5 IRQ_TYPE_EDGE_FALLING>;
-		pulses-per-revolution = <2>, <1>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
new file mode 100644
index 000000000000..a84cc3a4cfdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fan connected to PWM lines
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    const: pwm-fan
+
+  cooling-levels:
+    description: PWM duty cycle values corresponding to thermal cooling states.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      maximum: 255
+
+  fan-supply:
+    description: Phandle to the regulator that provides power to the fan.
+
+  interrupts:
+    description:
+      This contains an interrupt specifier for each fan tachometer output
+      connected to an interrupt source. The output signal must generate a
+      defined number of interrupts per fan revolution, which require that
+      it must be self resetting edge interrupts.
+    maxItems: 1
+
+  fan-shutdown-percent:
+    description:
+      Fan RPM in percent set during shutdown. This is used to keep the fan
+      running at fixed RPM after the kernel shut down, which is useful on
+      hardware that does keep heating itself even after the kernel did shut
+      down, for example from some sort of management core.
+    minimum: 0
+    maximum: 100
+
+  fan-stop-to-start-percent:
+    description:
+      Minimum fan RPM in percent to start when stopped.
+    minimum: 0
+    maximum: 100
+
+  fan-stop-to-start-us:
+    description:
+      Time to wait in microseconds after start when stopped.
+
+  pulses-per-revolution:
+    description:
+      Define the number of pulses per fan revolution for each tachometer
+      input as an integer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    default: 2
+
+  pwms:
+    description: The PWM that is used to control the fan.
+    maxItems: 1
+
+  "#cooling-cells": true
+
+required:
+  - compatible
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm-fan {
+      compatible = "pwm-fan";
+      cooling-levels = <0 102 170 230>;
+      pwms = <&pwm 0 10000 0>;
+      #cooling-cells = <2>;
+    };
+
+    thermal-zones {
+      cpu_thermal: cpu-thermal {
+        thermal-sensors = <&tmu 0>;
+        polling-delay-passive = <0>;
+        polling-delay = <0>;
+
+        trips {
+          cpu_alert1: cpu-alert1 {
+            temperature = <100000>; /* millicelsius */
+            hysteresis = <2000>; /* millicelsius */
+            type = "passive";
+          };
+        };
+
+        cooling-maps {
+          map0 {
+            trip = <&cpu_alert1>;
+            cooling-device = <&fan0 0 1>;
+          };
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pwm-fan {
+      compatible = "pwm-fan";
+      pwms = <&pwm 0 40000 0>;
+      fan-supply = <&reg_fan>;
+      interrupt-parent = <&gpio5>;
+      interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+      pulses-per-revolution = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml b/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
new file mode 100644
index 000000000000..dd82a80e4115
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/renesas,isl28022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas ISL28022 power monitor
+
+maintainers:
+  - Carsten Spieß <mail@carsten-spiess.de>
+
+description: |
+  The ISL28022 is a power monitor with I2C interface. The device monitors
+  voltage, current via shunt resistor and calculated power.
+
+  Datasheets:
+    https://www.renesas.com/us/en/www/doc/datasheet/isl28022.pdf
+
+properties:
+  compatible:
+    const: renesas,isl28022
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt resistor value in micro-Ohm
+    minimum: 800
+    default: 10000
+
+  renesas,shunt-range-microvolt:
+    description:
+      Maximal shunt voltage range of +/- 40 mV, 80 mV, 160 mV or 320 mV
+    default: 320000
+    enum: [40000, 80000, 160000, 320000]
+
+  renesas,average-samples:
+    description:
+      Number of samples to be used to report voltage, current and power values.
+    default: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@40 {
+            compatible = "renesas,isl28022";
+            reg = <0x40>;
+            shunt-resistor-micro-ohms = <8000>;
+            renesas,shunt-range-microvolt = <40000>;
+            renesas,average-samples = <128>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
index 4669217d01e1..14ac783c9a5f 100644
--- a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/hwmon/sensirion,sht15.yaml#
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Sensirion SHT15 humidity and temperature sensor
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
index 7d49478d9668..3d14d5fc96c5 100644
--- a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -10,10 +10,10 @@ maintainers:
   - Christopher Ruehl chris.ruehl@gtsys.com.hk
 
 description: |
-  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
+  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors
   designed especially for battery-driven high-volume consumer electronics
   applications.
-  For further information refere to Documentation/hwmon/shtc1.rst
+  For further information refer to Documentation/hwmon/shtc1.rst
 
   This binding document describes the binding for the hardware monitor
   portion of the driver.
@@ -31,13 +31,13 @@ properties:
   sensirion,blocking-io:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-      If set, the driver hold the i2c bus until measurement is finished.
+      If set, the driver holds the i2c bus until the measurement is finished.
 
   sensirion,low-precision:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-      If set, the sensor aquire data with low precision (not recommended).
-      The driver aquire data with high precision by default.
+      If set, the sensor acquires data with low precision (not recommended).
+      The driver acquires data with high precision by default.
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml b/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml
new file mode 100644
index 000000000000..b76805d39427
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sophgo,sg2042-hwmon-mcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 onboard MCU support
+
+maintainers:
+  - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: sophgo,sg2044-hwmon-mcu
+          - const: sophgo,sg2042-hwmon-mcu
+      - const: sophgo,sg2042-hwmon-mcu
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#thermal-sensor-cells"
+
+allOf:
+  - $ref: /schemas/thermal/thermal-sensor.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@17 {
+            compatible = "sophgo,sg2042-hwmon-mcu";
+            reg = <0x17>;
+            #thermal-sensor-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/st,stts751.yaml b/Documentation/devicetree/bindings/hwmon/st,stts751.yaml
new file mode 100644
index 000000000000..9c825adbed58
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/st,stts751.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/st,stts751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STTS751 Thermometer
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+  compatible:
+    const: st,stts751
+
+  reg:
+    maxItems: 1
+
+  smbus-timeout-disable:
+    description:
+      When set, the smbus timeout function will be disabled.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        thermometer@48 {
+            compatible = "st,stts751";
+            reg = <0x48>;
+            smbus-timeout-disable;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml b/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml
new file mode 100644
index 000000000000..aaf244790663
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/st,tsc1641.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST Microelectronics TSC1641 I2C power monitor
+
+maintainers:
+  - Igor Reznichenko <igor@reznichenko.net>
+
+description: |
+  TSC1641 is a 60 V, 16-bit high-precision power monitor with I2C and
+  MIPI I3C interface
+
+  Datasheets:
+    https://www.st.com/resource/en/datasheet/tsc1641.pdf
+
+properties:
+  compatible:
+    const: st,tsc1641
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Optional alert interrupt.
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description: Shunt resistor value in micro-ohms. Since device has internal
+      16-bit RSHUNT register with 10 uOhm LSB, the maximum value is capped at
+      655.35 mOhm.
+    minimum: 100
+    default: 1000
+    maximum: 655350
+
+  st,alert-polarity-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Default value is 0 which configures the normal polarity of the
+      ALERT pin, being active low open-drain. Setting this to 1 configures the
+      polarity of the ALERT pin to be inverted and active high open-drain.
+      Specify this property to set the alert polarity to active-high.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-sensor@40 {
+            compatible = "st,tsc1641";
+            reg = <0x40>;
+            shunt-resistor-micro-ohms = <1000>;
+            st,alert-polarity-active-high;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
new file mode 100644
index 000000000000..733cba780186
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/starfive,jh71x0-temp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH71x0 Temperature Sensor
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+description: |
+  StarFive Technology Co. JH71x0 embedded temperature sensor
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7100-temp
+      - starfive,jh7110-temp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sense
+      - const: bus
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  resets:
+    minItems: 2
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: sense
+      - const: bus
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+    #include <dt-bindings/reset/starfive-jh7100.h>
+
+    temperature-sensor@124a0000 {
+        compatible = "starfive,jh7100-temp";
+        reg = <0x124a0000 0x10000>;
+        clocks = <&clkgen JH7100_CLK_TEMP_SENSE>,
+                 <&clkgen JH7100_CLK_TEMP_APB>;
+        clock-names = "sense", "bus";
+        #thermal-sensor-cells = <0>;
+        resets = <&rstgen JH7100_RSTN_TEMP_SENSE>,
+                 <&rstgen JH7100_RSTN_TEMP_APB>;
+        reset-names = "sense", "bus";
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/stts751.txt b/Documentation/devicetree/bindings/hwmon/stts751.txt
deleted file mode 100644
index 3ee1dc30e72f..000000000000
--- a/Documentation/devicetree/bindings/hwmon/stts751.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* STTS751 thermometer.
-
-Required node properties:
-- compatible: "stts751"
-- reg: I2C bus address of the device
-
-Optional properties:
-- smbus-timeout-disable: when set, the smbus timeout function will be disabled
-
-Example stts751 node:
-
-temp-sensor {
-	compatible = "stts751";
-	reg = <0x48>;
-}
diff --git a/Documentation/devicetree/bindings/hwmon/syna,as370.yaml b/Documentation/devicetree/bindings/hwmon/syna,as370.yaml
new file mode 100644
index 000000000000..1f7005f55247
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/syna,as370.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/syna,as370.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics AS370 PVT sensors
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+properties:
+  compatible:
+    const: syna,as370-hwmon
+
+  reg:
+    description:
+      Address and length of the register set.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sensor@ea0810 {
+        compatible = "syna,as370-hwmon";
+        reg = <0xea0810 0xc>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml
new file mode 100644
index 000000000000..78e3d97e2ae5
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,adc128d818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC128D818 ADC System Monitor With Temperature Sensor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  The ADC128D818 is a 12-Bit, 8-Channel Analog to Digital Converter (ADC)
+  with a temperature sensor and an I2C interface.
+
+  Datasheets:
+    https://www.ti.com/product/ADC128D818
+
+properties:
+  compatible:
+    const: ti,adc128d818
+
+  reg:
+    maxItems: 1
+
+  ti,mode:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Operation mode.
+      Mode 0  - 7 single-ended voltage readings (IN0-IN6), 1 temperature
+      reading (internal).
+      Mode 1 - 8 single-ended voltage readings (IN0-IN7), no temperature.
+      Mode 2 - 4 pseudo-differential voltage readings
+      (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+      Mode 3 - 4 single-ended voltage readings (IN0-IN3), 2 pseudo-differential
+      voltage readings (IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+    default: 0
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exist, the
+      internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1d {
+            compatible = "ti,adc128d818";
+            reg = <0x1d>;
+            vref-supply = <&vref>;
+            ti,mode = /bits/ 8 <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
index 926be9a29044..fb80456120e1 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/hwmon/ti,ads7828.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
diff --git a/Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml b/Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml
new file mode 100644
index 000000000000..eb00756988be
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,amc6821.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMC6821 Intelligent Temperature Monitor and PWM Fan Controller
+
+maintainers:
+  - Farouk Bouabid <farouk.bouabid@cherry.de>
+  - Quentin Schulz <quentin.schulz@cherry.de>
+
+description:
+  Intelligent temperature monitor and pulse-width modulation (PWM) fan
+  controller.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: tsd,mule
+          - const: ti,amc6821
+      - const: ti,amc6821
+
+  reg:
+    maxItems: 1
+
+  i2c-mux:
+    type: object
+
+  fan:
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      cooling-levels:
+        description: PWM duty cycle values corresponding to thermal cooling states.
+        items:
+          maximum: 255
+
+  "#pwm-cells":
+    const: 2
+    description: |
+      Number of cells in a PWM specifier.
+      - cell 0: PWM period in nanoseconds
+      - cell 1: PWM polarity: 0 or PWM_POLARITY_INVERTED
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: tsd,mule
+
+then:
+  required:
+    - i2c-mux
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan_controller: fan@18 {
+            compatible = "ti,amc6821";
+            reg = <0x18>;
+            #pwm-cells = <2>;
+
+            fan {
+                pwms = <&fan_controller 40000 0>;
+            };
+        };
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan@18 {
+            compatible = "tsd,mule", "ti,amc6821";
+            reg = <0x18>;
+
+            i2c-mux {
+                compatible = "tsd,mule-i2c-mux";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                i2c@0 {
+                    reg = <0x0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    rtc@6f {
+                        compatible = "isil,isl1208";
+                        reg = <0x6f>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
index 6f0443322a36..d3cde8936686 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/hwmon/ti,ina2xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
@@ -20,26 +19,140 @@ description: |
 properties:
   compatible:
     enum:
+      - silergy,sq52206
+      - silergy,sy24655
       - ti,ina209
       - ti,ina219
       - ti,ina220
       - ti,ina226
+      - ti,ina228
       - ti,ina230
       - ti,ina231
+      - ti,ina233
+      - ti,ina237
+      - ti,ina238
+      - ti,ina260
+      - ti,ina700
+      - ti,ina780
 
   reg:
     maxItems: 1
 
+  "#io-channel-cells":
+    const: 1
+
   shunt-resistor:
     description:
       Shunt resistor value in micro-Ohm.
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  ti,shunt-gain:
+    description: |
+      Programmable gain divisor for the shunt voltage accuracy and range. This
+      property only applies to devices that have configurable PGA/ADCRANGE. The
+      gain value is used configure the gain and to convert the shunt voltage,
+      current and power register values when reading measurements from the
+      device.
+
+      For devices that have a configurable PGA (e.g. INA209, INA219, INA220),
+      the gain value maps directly with the PG bits of the config register.
+
+      For devices that have ADCRANGE configuration (e.g. INA238) a shunt-gain
+      value of 1 maps to ADCRANGE=1 where no gain divisor is applied to the
+      shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider
+      voltage range is used.
+
+      For SQ52206,the shunt-gain value 1 mapps to ADCRANGE=10/11, the value 2
+      mapps to ADCRANGE=01, and the value 4 mapps to ADCRANGE=00.
+
+      The default value is device dependent, and is defined by the reset value
+      of PGA/ADCRANGE in the respective configuration registers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
+  vs-supply:
+    description: phandle to the regulator that provides the VS supply typically
+      in range from 2.7 V to 5.5 V.
+
+  ti,alert-polarity-active-high:
+    description: Alert pin is asserted based on the value of Alert polarity Bit
+      of Mask/Enable register. Default value is Normal (0 which maps to
+      active-low open collector). The other value is Inverted
+      (1 which maps to active-high open collector). Specify this property to set
+      the alert polarity to active-high.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  ti,maximum-expected-current-microamp:
+    description: |
+      This value indicates the maximum current in microamps that you can
+      expect to measure with ina233 in your circuit.
+
+      This value will be used to calculate the Current_LSB and current/power
+      coefficient for the pmbus and to calibrate the IC.
+    minimum: 32768
+    maximum: 4294967295
+    default: 32768000
+
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - silergy,sq52206
+              - silergy,sy24655
+              - ti,ina209
+              - ti,ina219
+              - ti,ina220
+              - ti,ina226
+              - ti,ina228
+              - ti,ina230
+              - ti,ina231
+              - ti,ina237
+              - ti,ina238
+              - ti,ina260
+              - ti,ina700
+              - ti,ina780
+    then:
+      properties:
+        ti,maximum-expected-current-microamp: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - silergy,sy24655
+              - ti,ina209
+              - ti,ina219
+              - ti,ina220
+              - ti,ina226
+              - ti,ina230
+              - ti,ina231
+              - ti,ina260
+              - ti,ina700
+              - ti,ina780
+    then:
+      properties:
+        ti,shunt-gain: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,ina700
+              - ti,ina780
+    then:
+      properties:
+        shunt-resistor: false
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -50,6 +163,10 @@ examples:
         power-sensor@44 {
             compatible = "ti,ina220";
             reg = <0x44>;
+            #io-channel-cells = <1>;
+            label = "vdd_3v0";
             shunt-resistor = <1000>;
+            vs-supply = <&vdd_3v0>;
+            ti,alert-polarity-active-high;
         };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml
new file mode 100644
index 000000000000..5f10f1207d69
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,ina3221.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,ina3221.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments INA3221 Current and Voltage Monitor
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    const: ti,ina3221
+
+  reg:
+    maxItems: 1
+
+  ti,single-shot:
+    description: |
+      This chip has two power modes: single-shot (chip takes one measurement
+      and then shuts itself down) and continuous (chip takes continuous
+      measurements). The continuous mode is more reliable and suitable for
+      hardware monitor type device, but the single-shot mode is more power-
+      friendly and useful for battery-powered device which cares power
+      consumptions while still needs some measurements occasionally.
+
+      If this property is present, the single-shot mode will be used, instead
+      of the default continuous one for monitoring.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  "#address-cells":
+    description: Required only if a child node is present.
+    const: 1
+
+  "#size-cells":
+    description: Required only if a child node is present.
+    const: 0
+
+patternProperties:
+  "^input@[0-2]$":
+    description: The node contains optional child nodes for three channels.
+      Each child node describes the information of input source. Input channels
+      default to enabled in the chip. Unless channels are explicitly disabled
+      in device-tree, input channels will be enabled.
+    type: object
+    additionalProperties: false
+    properties:
+      reg:
+        description: Must be 0, 1 and 2, corresponding to the IN1, IN2 or IN3
+          ports of the INA3221, respectively.
+        enum: [ 0, 1, 2 ]
+
+      label:
+        description: name of the input source
+
+      shunt-resistor-micro-ohms:
+        description: shunt resistor value in micro-Ohm
+
+      ti,summation-disable:
+        description: |
+          The INA3221 has a critical alert pin that can be controlled by the
+          summation control function. This function adds the single
+          shunt-voltage conversions for the desired channels in order to
+          compare the combined sum to the programmed limit. The Shunt-Voltage
+          Sum Limit register contains the programmed value that is compared
+          to the value in the Shunt-Voltage Sum register in order to
+          determine if the total summed limit is exceeded. If the
+          shunt-voltage sum limit value is exceeded, the critical alert pin
+          is asserted.
+
+          For the summation limit to have a meaningful value, it is necessary
+          to use the same shunt-resistor value on all enabled channels. If
+          this is not the case or if a channel should not be used for
+          triggering the critical alert pin, then this property can be used
+          exclude specific channels from the summation control function.
+        type: boolean
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-sensor@40 {
+            compatible = "ti,ina3221";
+            reg = <0x40>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            input@0 {
+                reg = <0x0>;
+                /*
+                 * Input channels are enabled by default in the device and so
+                 * to disable, must be explicitly disabled in device-tree.
+                 */
+                status = "disabled";
+            };
+
+            input@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <5000>;
+            };
+
+            input@2 {
+                reg = <0x2>;
+                label = "VDD_5V";
+                shunt-resistor-micro-ohms = <5000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
new file mode 100644
index 000000000000..5c0cdc0091b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,lm87.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,lm87.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LM87 Hardware Monitor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description: |
+  The LM87 is a serial interface system hardware monitor
+  with remote diode temperature sensing.
+
+  Datasheets:
+    https://www.ti.com/product/LM87
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1024
+      - ti,lm87
+
+  reg:
+    maxItems: 1
+
+  has-temp3:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      This configures pins 18 and 19 to be used as a second
+      remote temperature sensing channel. By default the pins
+      are configured as voltage input pins in0 and in5.
+
+  has-in6:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When set, pin 5 is configured to be used as voltage input
+      in6. Otherwise the pin is set as FAN1 input.
+
+  has-in7:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When set, pin 6 is configured to be used as voltage input
+      in7. Otherwise the pin is set as FAN2 input.
+
+  vcc-supply:
+    description:
+      Regulator supplying power, can be configured to measure
+      5.0V power supply. Default is 3.3V.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hwmon@2e {
+            compatible = "ti,lm87";
+            reg = <0x2e>;
+            has-temp3;
+            vcc-supply = <&reg_5v0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
index d3eff4fac107..96b2e4969f78 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/hwmon/ti,tmp102.yaml#
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TMP102 temperature sensor
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
@@ -20,9 +20,16 @@ properties:
   reg:
     maxItems: 1
 
+  label:
+    description:
+      A descriptive name for this channel, like "ambient" or "psu".
+
   "#thermal-sensor-cells":
     const: 1
 
+  vcc-supply:
+    description: Power supply for tmp102
+
 required:
   - compatible
   - reg
@@ -42,6 +49,8 @@ examples:
             reg = <0x48>;
             interrupt-parent = <&gpio7>;
             interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+            label = "somelabel";
+            vcc-supply = <&supply>;
             #thermal-sensor-cells = <1>;
         };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
index eda55bbc172d..a6f9319e068d 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
@@ -1,17 +1,29 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/hwmon/ti,tmp108.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TMP108 temperature sensor
+title: TMP108/P3T1085(NXP) temperature sensor
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The TMP108/P3T1085(NXP) is a digital-output temperature sensor with a
+  dynamically-programmable limit window, and under- and overtemperature
+  alert functions.
+
+  P3T1085(NXP) support I3C.
+
+  Datasheets:
+    https://www.ti.com/product/TMP108
+    https://www.nxp.com/docs/en/data-sheet/P3T1085UK.pdf
 
 properties:
   compatible:
     enum:
+      - nxp,p3t1085
       - ti,tmp108
 
   interrupts:
@@ -24,6 +36,9 @@ properties:
   "#thermal-sensor-cells":
     const: 0
 
+  vcc-supply:
+    description: phandle to the regulator that provides the V+ supply
+
 required:
   - compatible
   - reg
@@ -45,6 +60,7 @@ examples:
             interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
             pinctrl-names = "default";
             pinctrl-0 = <&tmp_alrt>;
+            vcc-supply = <&supply>;
             #thermal-sensor-cells = <0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
new file mode 100644
index 000000000000..0e8ddf0ad789
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp401.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP401, TPM411 and TMP43x temperature sensor
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  ±1°C Remote and Local temperature sensor
+
+  Datasheets:
+  https://www.ti.com/lit/ds/symlink/tmp401.pdf
+  https://www.ti.com/lit/ds/symlink/tmp411.pdf
+  https://www.ti.com/lit/ds/symlink/tmp431.pdf
+  https://www.ti.com/lit/ds/symlink/tmp435.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp401
+      - ti,tmp411
+      - ti,tmp431
+      - ti,tmp432
+      - ti,tmp435
+
+  reg:
+    maxItems: 1
+
+  ti,extended-range-enable:
+    description:
+      When set, this sensor measures over extended temperature range.
+    type: boolean
+
+  ti,n-factor:
+    description:
+      value to be used for converting remote channel measurements to
+      temperature.
+    $ref: /schemas/types.yaml#/definitions/int32
+    minimum: -128
+    maximum: 127
+
+  ti,beta-compensation:
+    description:
+      value to select beta correction range.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp401
+    then:
+      properties:
+        ti,n-factor: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp401
+              - ti,tmp411
+    then:
+      properties:
+        ti,beta-compensation: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp401";
+        reg = <0x4c>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp431";
+        reg = <0x4c>;
+        ti,extended-range-enable;
+        ti,n-factor = <0x3b>;
+        ti,beta-compensation = <0x7>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
index 36f649938fb7..a6f1fa75a67c 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
@@ -58,10 +58,9 @@ patternProperties:
         description: |
           The value (two's complement) to be programmed in the channel specific N correction register.
           For remote channels only.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        items:
-          minimum: 0
-          maximum: 255
+        $ref: /schemas/types.yaml#/definitions/int32
+        minimum: -128
+        maximum: 127
 
     required:
       - reg
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
new file mode 100644
index 000000000000..f9c00cbb2806
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp464.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP464 and TMP468 temperature sensors
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  ±0.0625°C Remote and Local temperature sensor
+  https://www.ti.com/lit/ds/symlink/tmp464.pdf
+  https://www.ti.com/lit/ds/symlink/tmp468.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp464
+      - ti,tmp468
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@([0-8])$":
+    type: object
+    description: |
+      Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: |
+          The channel number. 0 is local channel, 1-8 are remote channels.
+        items:
+          minimum: 0
+          maximum: 8
+
+      label:
+        description: |
+          A descriptive name for this channel, like "ambient" or "psu".
+
+      ti,n-factor:
+        description: |
+          The value (two's complement) to be programmed in the channel specific N correction register.
+          For remote channels only.
+        $ref: /schemas/types.yaml#/definitions/int32
+        minimum: -128
+        maximum: 127
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4b {
+        compatible = "ti,tmp464";
+        reg = <0x4b>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4b {
+        compatible = "ti,tmp464";
+        reg = <0x4b>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0x0>;
+          label = "local";
+        };
+
+        channel@1 {
+          reg = <0x1>;
+          ti,n-factor = <(-10)>;
+          label = "external";
+        };
+
+        channel@2 {
+          reg = <0x2>;
+          ti,n-factor = <0x10>;
+          label = "somelabel";
+        };
+
+        channel@3 {
+          reg = <0x3>;
+          status = "disabled";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index 1502b22c77cc..0fe6ea190f60 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/hwmon/ti,tmp513.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
@@ -21,7 +20,6 @@ description: |
   https://www.ti.com/lit/gpn/tmp513
   https://www.ti.com/lit/gpn/tmp512
 
-
 properties:
   compatible:
     enum:
@@ -33,7 +31,7 @@ properties:
 
   shunt-resistor-micro-ohms:
     description: |
-      If 0, the calibration process will be skiped and the current and power
+      If 0, the calibration process will be skipped and the current and power
       measurement engine will not work. Temperature and voltage measurement
       will continue to work. The shunt value also need to respect:
       rshunt <= pga-gain * 40 * 1000 * 1000.
@@ -72,20 +70,23 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     i2c {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          tmp513@5c {
-              compatible = "ti,tmp513";
-              reg = <0x5C>;
-              shunt-resistor-micro-ohms = <330000>;
-              ti,bus-range-microvolt = <32000000>;
-              ti,pga-gain = <8>;
-              ti,nfactor = <0x1 0xF3 0x00>;
-          };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tmp513@5c {
+            compatible = "ti,tmp513";
+            reg = <0x5c>;
+            shunt-resistor-micro-ohms = <330000>;
+            ti,bus-range-microvolt = <32000000>;
+            ti,pga-gain = <8>;
+            ti,nfactor = <0x1 0xf3 0x00>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
index 3bc8e73dfbf0..d57e4bf8f65f 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/hwmon/ti,tps23861.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
@@ -16,7 +15,6 @@ description: |
   Datasheets:
   https://www.ti.com/lit/gpn/tps23861
 
-
 properties:
   compatible:
     enum:
@@ -26,7 +24,7 @@ properties:
     maxItems: 1
 
   shunt-resistor-micro-ohms:
-    description: The value of curent sense resistor in microohms.
+    description: The value of current sense resistor in microohms.
     default: 255000
     minimum: 250000
     maximum: 255000
@@ -35,17 +33,20 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: hwmon-common.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     i2c {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          tps23861@30 {
-              compatible = "ti,tps23861";
-              reg = <0x30>;
-              shunt-resistor-micro-ohms = <255000>;
-          };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps23861@30 {
+            compatible = "ti,tps23861";
+            reg = <0x30>;
+            shunt-resistor-micro-ohms = <255000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt
index 9c27ed694bbb..4a4df4ffc460 100644
--- a/Documentation/devicetree/bindings/hwmon/vexpress.txt
+++ b/Documentation/devicetree/bindings/hwmon/vexpress.txt
@@ -9,7 +9,7 @@ Requires node properties:
 	"arm,vexpress-power"
 	"arm,vexpress-energy"
 - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
-  (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+  (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
   for more details)
 
 Optional node properties:
diff --git a/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml
index 31ce77a4b087..6971ecb314eb 100644
--- a/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml
+++ b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/hwmon/winbond,w83781d.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
index 1b03810d4b4d..5a799246a373 100644
--- a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
+++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/allwinner,sun6i-a31-p2wi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings
+title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
index 6ecb0270d88d..c4cc8af18280 100644
--- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson I2C Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Beniamino Galvani <b.galvani@gmail.com>
 
 allOf:
@@ -30,6 +30,9 @@ properties:
   clocks:
     minItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/apm,xgene-slimpro-i2c.yaml b/Documentation/devicetree/bindings/i2c/apm,xgene-slimpro-i2c.yaml
new file mode 100644
index 000000000000..9460c64071f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/apm,xgene-slimpro-i2c.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/apm,xgene-slimpro-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SLIMpro Mailbox I2C
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+description:
+  An I2C controller accessed over the "SLIMpro" mailbox.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: apm,xgene-slimpro-i2c
+
+  mboxes:
+    maxItems: 1
+
+required:
+  - compatible
+  - mboxes
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        compatible = "apm,xgene-slimpro-i2c";
+        mboxes = <&mailbox 0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
index 82b953181a52..500a965bdb7a 100644
--- a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/i2c/apple,i2c.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/apple,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Apple/PASemi I2C controller
 
@@ -20,9 +20,22 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - const: apple,t8103-i2c
-      - const: apple,i2c
+    oneOf:
+      - items:
+          - const: apple,t6020-i2c
+          - const: apple,t8103-i2c
+      - items:
+          - enum:
+              # Do not add additional SoC to this list.
+              - apple,s5l8960x-i2c
+              - apple,t7000-i2c
+              - apple,s8000-i2c
+              - apple,t8010-i2c
+              - apple,t8015-i2c
+              - apple,t8103-i2c
+              - apple,t8112-i2c
+              - apple,t6000-i2c
+          - const: apple,i2c
 
   reg:
     maxItems: 1
@@ -40,6 +53,9 @@ properties:
       used. This frequency is generated by dividing the reference clock.
       Allowed values are between ref_clk/(16*4) and ref_clk/(16*255).
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
new file mode 100644
index 000000000000..e58465d1b0c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/arm,i2c-versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C Controller on ARM Ltd development platforms
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-i2c
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+...
+
diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
index ea643e6c3ef5..5b9bd2feda3b 100644
--- a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
+title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs
 
 maintainers:
   - Rayn Chen <rayn_chen@aspeedtech.com>
@@ -44,11 +44,6 @@ properties:
     description: frequency of the bus clock in Hz defaults to 100 kHz when not
       specified
 
-  multi-master:
-    type: boolean
-    description:
-      states that there is another master active on this bus
-
 required:
   - reg
   - compatible
@@ -60,10 +55,9 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/aspeed-clock.h>
-    i2c0: i2c-bus@40 {
+    i2c@40 {
       #address-cells = <1>;
       #size-cells = <0>;
-      #interrupt-cells = <1>;
       compatible = "aspeed,ast2500-i2c-bus";
       reg = <0x40 0x40>;
       clocks = <&syscon ASPEED_CLK_APB>;
diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
new file mode 100644
index 000000000000..e61cdb5b16ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C for Atmel/Microchip platforms
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91rm9200-i2c
+              - atmel,at91sam9261-i2c
+              - atmel,at91sam9260-i2c
+              - atmel,at91sam9g20-i2c
+              - atmel,at91sam9g10-i2c
+              - atmel,at91sam9x5-i2c
+              - atmel,sama5d4-i2c
+              - atmel,sama5d2-i2c
+              - microchip,sam9x60-i2c
+      - items:
+          - enum:
+              - microchip,sama7d65-i2c
+              - microchip,sama7g5-i2c
+              - microchip,sam9x7-i2c
+          - const: microchip,sam9x60-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    items:
+      - description: TX DMA Channel Specifier
+      - description: RX DMA Channel Specifier
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum number of data the RX and TX FIFOs can store for
+      FIFO capable I2C controllers.
+
+  scl-gpios: true
+
+  sda-gpios: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,sama5d4-i2c
+              - atmel,sama5d2-i2c
+              - microchip,sam9x60-i2c
+              - microchip,sama7d65-i2c
+              - microchip,sama7g5-i2c
+    then:
+      properties:
+        i2c-sda-hold-time-ns:
+          description:
+            TWD hold time
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0: i2c@fff84000 {
+        compatible = "atmel,at91sam9g20-i2c";
+        reg = <0xfff84000 0x100>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&twi0_clk>;
+        clock-frequency = <400000>;
+
+        eeprom@50 {
+            compatible = "atmel,24c512";
+            reg = <0x50>;
+            pagesize = <128>;
+        };
+    };
+
+    i2c1: i2c@f8034600 {
+        compatible = "atmel,sama5d2-i2c";
+        reg = <0xf8034600 0x100>;
+        interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(11)>,
+               <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(12)>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&flx0>;
+        atmel,fifo-size = <16>;
+        i2c-sda-hold-time-ns = <336>;
+        pinctrl-names = "default", "gpio";
+        pinctrl-0 = <&pinctrl_i2c0>;
+        pinctrl-1 = <&pinctrl_i2c0_gpio>;
+        sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+        scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+        eeprom@54 {
+            compatible = "atmel,24c02";
+            reg = <0x54>;
+            pagesize = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
deleted file mode 100644
index a8a35df41951..000000000000
--- a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Broadcom BCM2835 I2C controller
-
-Required properties:
-- compatible : Should be one of:
-	"brcm,bcm2711-i2c"
-	"brcm,bcm2835-i2c"
-- reg: Should contain register location and length.
-- interrupts: Should contain interrupt.
-- clocks : The clock feeding the I2C controller.
-
-Recommended properties:
-- clock-frequency : desired I2C bus clock frequency in Hz.
-
-Example:
-
-i2c@7e205000 {
-	compatible = "brcm,bcm2835-i2c";
-	reg = <0x7e205000 0x1000>;
-	interrupts = <2 21>;
-	clocks = <&clk_i2c>;
-	clock-frequency = <100000>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml
new file mode 100644
index 000000000000..8256490a7af2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,bcm2835-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 I2C controller
+
+maintainers:
+  - Stephen Warren <swarren@wwwdotorg.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - brcm,bcm2835-i2c
+      - items:
+          - const: brcm,bcm2711-i2c
+          - const: brcm,bcm2835-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7e205000 {
+        compatible = "brcm,bcm2835-i2c";
+        reg = <0x7e205000 0x1000>;
+        interrupts = <2 21>;
+        clocks = <&clk_i2c>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
index 7070c04469ed..ac9ddf228c82 100644
--- a/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
@@ -76,21 +76,21 @@ else:
 
 examples:
   - |
-      bsca: i2c@f0406200 {
-          clock-frequency = <390000>;
-          compatible = "brcm,brcmstb-i2c";
-          interrupt-parent = <&irq0_intc>;
-          reg = <0xf0406200 0x58>;
-          interrupts = <0x18>;
-          interrupt-names = "upg_bsca";
-      };
+    bsca: i2c@f0406200 {
+        compatible = "brcm,brcmstb-i2c";
+        reg = <0xf0406200 0x58>;
+        clock-frequency = <390000>;
+        interrupt-parent = <&irq0_intc>;
+        interrupts = <0x18>;
+        interrupt-names = "upg_bsca";
+    };
 
   - |
-      ddc0: i2c@7ef04500 {
-          compatible = "brcm,bcm2711-hdmi-i2c";
-          reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
-          reg-names = "bsc", "auto-i2c";
-          clock-frequency = <390000>;
-      };
+    ddc0: i2c@7ef04500 {
+        compatible = "brcm,bcm2711-hdmi-i2c";
+        reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+        reg-names = "bsc", "auto-i2c";
+        clock-frequency = <390000>;
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt
deleted file mode 100644
index 1b87b741fa8e..000000000000
--- a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Broadcom Kona Family I2C
-=========================
-
-This I2C controller is used in the following Broadcom SoCs:
-
-  BCM11130
-  BCM11140
-  BCM11351
-  BCM28145
-  BCM28155
-
-Required Properties
--------------------
-- compatible: "brcm,bcm11351-i2c", "brcm,kona-i2c"
-- reg: Physical base address and length of controller registers
-- interrupts: The interrupt number used by the controller
-- clocks: clock specifier for the kona i2c external clock
-- clock-frequency: The I2C bus frequency in Hz
-- #address-cells: Should be <1>
-- #size-cells: Should be <0>
-
-Refer to clocks/clock-bindings.txt for generic clock consumer
-properties.
-
-Example:
-
-i2c@3e016000 {
-	compatible = "brcm,bcm11351-i2c","brcm,kona-i2c";
-	reg = <0x3e016000 0x80>;
-	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&bsc1_clk>;
-	clock-frequency = <400000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml
new file mode 100644
index 000000000000..7a694af90fc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,kona-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family I2C controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11351-i2c
+          - brcm,bcm21664-i2c
+          - brcm,bcm23550-i2c
+      - const: brcm,kona-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000, 1000000, 3400000 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c@3e016000 {
+        compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+        reg = <0x3e016000 0x80>;
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bsc1_clk>;
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
index 1ca1cd19bd1d..9f1d35ce1fe8 100644
--- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -1,13 +1,13 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Cadence I2C controller Device Tree Bindings
+title: Cadence I2C controller
 
 maintainers:
-  - Michal Simek <michal.simek@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
@@ -24,6 +24,9 @@ properties:
   clocks:
     minItems: 1
 
+  resets:
+    maxItems: 1
+
   interrupts:
     maxItems: 1
 
@@ -38,6 +41,16 @@ properties:
     description: |
       Input clock name.
 
+  fifo-depth:
+    description:
+      Size of the data FIFO in bytes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 16
+    enum: [2, 4, 8, 16, 32, 64, 128, 256]
+
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -52,9 +65,11 @@ examples:
     i2c@e0004000 {
         compatible = "cdns,i2c-r1p10";
         clocks = <&clkc 38>;
+        resets = <&rstc 288>;
         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
         reg = <0xe0004000 0x1000>;
         clock-frequency = <400000>;
         #address-cells = <1>;
         #size-cells = <0>;
+        fifo-depth = <8>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index b386e4128a79..580003cdfff5 100644
--- a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -10,7 +10,6 @@ title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
 maintainers:
   - Doug Anderson <dianders@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   On some ChromeOS board designs we've got a connection to the EC
@@ -22,7 +21,7 @@ description: |
   google,cros-ec-spi or google,cros-ec-i2c.
 
 allOf:
-  - $ref: i2c-controller.yaml#
+  - $ref: /schemas/i2c/i2c-controller.yaml#
 
 properties:
   compatible:
@@ -40,7 +39,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -48,6 +47,7 @@ examples:
             compatible = "google,cros-ec-spi";
             reg = <0>;
             spi-max-frequency = <5000000>;
+            interrupts = <99 0>;
 
             i2c-tunnel {
                 compatible = "google,cros-ec-i2c-tunnel";
diff --git a/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml b/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml
new file mode 100644
index 000000000000..7d7a8de7bcd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/hisilicon,ascend910-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon common I2C controller
+
+maintainers:
+  - Yicong Yang <yangyicong@hisilicon.com>
+
+description:
+  The HiSilicon common I2C controller can be used for many different
+  types of SoC such as Huawei Ascend AI series chips.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: hisilicon,ascend910-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 400000
+
+  i2c-sda-falling-time-ns:
+    default: 343
+
+  i2c-scl-falling-time-ns:
+    default: 203
+
+  i2c-sda-hold-time-ns:
+    default: 830
+
+  i2c-scl-rising-time-ns:
+    default: 365
+
+  i2c-digital-filter-width-ns:
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@38b0000 {
+      compatible = "hisilicon,ascend910-i2c";
+      reg = <0x38b0000 0x10000>;
+      interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+      i2c-sda-falling-time-ns = <56>;
+      i2c-scl-falling-time-ns = <56>;
+      i2c-sda-hold-time-ns = <56>;
+      i2c-scl-rising-time-ns = <56>;
+      i2c-digital-filter;
+      i2c-digital-filter-width-ns = <0x0>;
+      clocks = <&alg_clk>;
+      clock-frequency = <400000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/hisilicon,hix5hd2-i2c.yaml b/Documentation/devicetree/bindings/i2c/hisilicon,hix5hd2-i2c.yaml
new file mode 100644
index 000000000000..3faa7954e411
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/hisilicon,hix5hd2-i2c.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/hisilicon,hix5hd2-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: I2C for HiSilicon hix5hd2 chipset platform
+
+maintainers:
+  - Wei Yan <sledge.yanwei@huawei.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,hix5hd2-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: Desired I2C bus frequency in Hz
+    default: 100000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hix5hd2-clock.h>
+
+    i2c@f8b10000 {
+        compatible = "hisilicon,hix5hd2-i2c";
+        reg = <0xf8b10000 0x1000>;
+        interrupts = <0 38 4>;
+        clocks = <&clock HIX5HD2_I2C0_RST>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml
new file mode 100644
index 000000000000..6604dcd47251
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/hpe,gxp-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP SoC I2C Controller
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: hpe,gxp-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+  hpe,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the global status and enable interrupt registers shared
+      between each I2C engine controller instance. It enables the I2C
+      engine controller to act as both a master or slave by being able to
+      arm and respond to interrupts from its engine. Each bit in the
+      registers represent the respective bit position.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@2600 {
+        compatible = "hpe,gxp-i2c";
+        reg = <0x2500 0x70>;
+        interrupts = <9>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hpe,sysreg = <&sysreg_system_controller>;
+        clock-frequency = <10000>;
+
+        eeprom@50 {
+            compatible = "atmel,24c128";
+            reg = <0x50>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
deleted file mode 100644
index 548a73cde796..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-GPIO-based I2C Arbitration Using a Challenge & Response Mechanism
-=================================================================
-This uses GPIO lines and a challenge & response mechanism to arbitrate who is
-the master of an I2C bus in a multimaster situation.
-
-In many cases using GPIOs to arbitrate is not needed and a design can use
-the standard I2C multi-master rules.  Using GPIOs is generally useful in
-the case where there is a device on the bus that has errata and/or bugs
-that makes standard multimaster mode not feasible.
-
-Note that this scheme works well enough but has some downsides:
-* It is nonstandard (not using standard I2C multimaster)
-* Having two masters on a bus in general makes it relatively hard to debug
-  problems (hard to tell if i2c issues were caused by one master, another, or
-  some device on the bus).
-
-
-Algorithm:
-
-All masters on the bus have a 'bus claim' line which is an output that the
-others can see. These are all active low with pull-ups enabled.  We'll
-describe these lines as:
-
-- OUR_CLAIM: output from us signaling to other hosts that we want the bus
-- THEIR_CLAIMS: output from others signaling that they want the bus
-
-The basic algorithm is to assert your line when you want the bus, then make
-sure that the other side doesn't want it also.  A detailed explanation is best
-done with an example.
-
-Let's say we want to claim the bus.  We:
-1. Assert OUR_CLAIM.
-2. Waits a little bit for the other sides to notice (slew time, say 10
-   microseconds).
-3. Check THEIR_CLAIMS.  If none are asserted then the we have the bus and we are
-   done.
-4. Otherwise, wait for a few milliseconds and see if THEIR_CLAIMS are released.
-5. If not, back off, release the claim and wait for a few more milliseconds.
-6. Go back to 1 (until retry time has expired).
-
-
-Required properties:
-- compatible: i2c-arb-gpio-challenge
-- our-claim-gpio: The GPIO that we use to claim the bus.
-- their-claim-gpios: The GPIOs that the other sides use to claim the bus.
-  Note that some implementations may only support a single other master.
-- I2C arbitration bus node. See i2c-arb.txt in this directory.
-
-Optional properties:
-- slew-delay-us: microseconds to wait for a GPIO to go high. Default is 10 us.
-- wait-retry-us: we'll attempt another claim after this many microseconds.
-    Default is 3000 us.
-- wait-free-us: we'll give up after this many microseconds. Default is 50000 us.
-
-
-Example:
-	i2c@12ca0000 {
-		compatible = "acme,some-i2c-device";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	i2c-arbitrator {
-		compatible = "i2c-arb-gpio-challenge";
-
-		i2c-parent = <&{/i2c@12CA0000}>;
-
-		our-claim-gpio = <&gpf0 3 1>;
-		their-claim-gpios = <&gpe0 4 1>;
-		slew-delay-us = <10>;
-		wait-retry-us = <3000>;
-		wait-free-us = <50000>;
-
-		i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			i2c@52 {
-				// Normal I2C device
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.yaml b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.yaml
new file mode 100644
index 000000000000..b618b5a3433a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-arb-gpio-challenge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based I2C Arbitration Using a Challenge & Response Mechanism
+
+maintainers:
+  - Doug Anderson <dianders@chromium.org>
+  - Peter Rosin <peda@axentia.se>
+
+description: |
+  This uses GPIO lines and a challenge & response mechanism to arbitrate who is
+  the master of an I2C bus in a multimaster situation.
+
+  In many cases using GPIOs to arbitrate is not needed and a design can use the
+  standard I2C multi-master rules.  Using GPIOs is generally useful in the case
+  where there is a device on the bus that has errata and/or bugs that makes
+  standard multimaster mode not feasible.
+
+  Note that this scheme works well enough but has some downsides:
+   * It is nonstandard (not using standard I2C multimaster)
+   * Having two masters on a bus in general makes it relatively hard to debug
+     problems (hard to tell if i2c issues were caused by one master, another,
+     or some device on the bus).
+
+  Algorithm:
+  All masters on the bus have a 'bus claim' line which is an output that the
+  others can see. These are all active low with pull-ups enabled.  We'll
+  describe these lines as:
+   * OUR_CLAIM: output from us signaling to other hosts that we want the bus
+   * THEIR_CLAIMS: output from others signaling that they want the bus
+
+  The basic algorithm is to assert your line when you want the bus, then make
+  sure that the other side doesn't want it also.  A detailed explanation is
+  best done with an example.
+
+  Let's say we want to claim the bus.  We:
+  1. Assert OUR_CLAIM.
+  2. Waits a little bit for the other sides to notice (slew time, say 10
+     microseconds).
+  3. Check THEIR_CLAIMS.  If none are asserted then the we have the bus and we
+     are done.
+  4. Otherwise, wait for a few milliseconds and see if THEIR_CLAIMS are released.
+  5. If not, back off, release the claim and wait for a few more milliseconds.
+  6. Go back to 1 (until retry time has expired).
+
+properties:
+  compatible:
+    const: i2c-arb-gpio-challenge
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The I2C bus that this multiplexer's master-side port is connected to.
+
+  our-claim-gpios:
+    maxItems: 1
+    description:
+      The GPIO that we use to claim the bus.
+
+  slew-delay-us:
+    default: 10
+    description:
+      Time to wait for a GPIO to go high.
+
+  their-claim-gpios:
+    minItems: 1
+    maxItems: 8
+    description:
+      The GPIOs that the other sides use to claim the bus.  Note that some
+      implementations may only support a single other master.
+
+  wait-free-us:
+    default: 50000
+    description:
+      We'll give up after this many microseconds.
+
+  wait-retry-us:
+    default: 3000
+    description:
+      We'll attempt another claim after this many microseconds.
+
+  i2c-arb:
+    type: object
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+    description:
+      I2C arbitration bus node.
+
+required:
+  - compatible
+  - i2c-arb
+  - our-claim-gpios
+  - their-claim-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c-arbitrator {
+        compatible = "i2c-arb-gpio-challenge";
+        i2c-parent = <&i2c_4>;
+
+        our-claim-gpios = <&gpf0 3 GPIO_ACTIVE_LOW>;
+        their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+        slew-delay-us = <10>;
+        wait-retry-us = <3000>;
+        wait-free-us = <50000>;
+
+        i2c-arb {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            sbs-battery@b {
+                compatible = "sbs,sbs-battery";
+                reg = <0xb>;
+                sbs,poll-retry-count = <1>;
+            };
+
+            embedded-controller@1e {
+                compatible = "google,cros-ec-i2c";
+                reg = <0x1e>;
+                interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+                interrupt-parent = <&gpx1>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&ec_irq>;
+                wakeup-source;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb.txt b/Documentation/devicetree/bindings/i2c/i2c-arb.txt
deleted file mode 100644
index 59abf9277bdc..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-arb.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Common i2c arbitration bus properties.
-
-- i2c-arb child node
-
-Required properties for the i2c-arb child node:
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties for i2c-arb child node:
-- Child nodes conforming to i2c bus binding
-
-
-Example :
-
-	/*
-	   An NXP pca9541 I2C bus master selector at address 0x74
-	   with a NXP pca8574 GPIO expander attached.
-	 */
-
-	arb@74 {
-		compatible = "nxp,pca9541";
-		reg = <0x74>;
-
-		i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			gpio@38 {
-				compatible = "nxp,pca8574";
-				reg = <0x38>;
-				#gpio-cells = <2>;
-				gpio-controller;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
deleted file mode 100644
index 2015f50aed0f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-I2C for Atmel platforms
-
-Required properties :
-- compatible : Must be one of:
-	"atmel,at91rm9200-i2c",
-	"atmel,at91sam9261-i2c",
-	"atmel,at91sam9260-i2c",
-	"atmel,at91sam9g20-i2c",
-	"atmel,at91sam9g10-i2c",
-	"atmel,at91sam9x5-i2c",
-	"atmel,sama5d4-i2c",
-	"atmel,sama5d2-i2c",
-	"microchip,sam9x60-i2c".
-- reg: physical base address of the controller and length of memory mapped
-     region.
-- interrupts: interrupt number to the cpu.
-- #address-cells = <1>;
-- #size-cells = <0>;
-- clocks: phandles to input clocks.
-
-Optional properties:
-- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
-- dmas: A list of two dma specifiers, one for each entry in dma-names.
-- dma-names: should contain "tx" and "rx".
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
-  capable I2C controllers.
-- i2c-sda-hold-time-ns: TWD hold time, only available for:
-	"atmel,sama5d4-i2c",
-	"atmel,sama5d2-i2c",
-	"microchip,sam9x60-i2c".
-- scl-gpios: specify the gpio related to SCL pin
-- sda-gpios: specify the gpio related to SDA pin
-- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
-  bus recovery, call it "gpio" state
-- Child nodes conforming to i2c bus binding
-
-
-Examples :
-
-i2c0: i2c@fff84000 {
-	compatible = "atmel,at91sam9g20-i2c";
-	reg = <0xfff84000 0x100>;
-	interrupts = <12 4 6>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&twi0_clk>;
-	clock-frequency = <400000>;
-
-	24c512@50 {
-		compatible = "atmel,24c512";
-		reg = <0x50>;
-		pagesize = <128>;
-	}
-}
-
-i2c0: i2c@f8034600 {
-	compatible = "atmel,sama5d2-i2c";
-	reg = <0xf8034600 0x100>;
-	interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-	dmas = <&dma0
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-		AT91_XDMAC_DT_PERID(11)>,
-	       <&dma0
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-		AT91_XDMAC_DT_PERID(12)>;
-	dma-names = "tx", "rx";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&flx0>;
-	atmel,fifo-size = <16>;
-	i2c-sda-hold-time-ns = <336>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c0>;
-	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	wm8731: wm8731@1a {
-		compatible = "wm8731";
-		reg = <0x1a>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-atr.yaml b/Documentation/devicetree/bindings/i2c/i2c-atr.yaml
new file mode 100644
index 000000000000..1939ab339bfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-atr.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-atr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common i2c address translator properties
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+
+description:
+  An I2C Address Translator (ATR) is a device with an I2C slave parent
+  ("upstream") port and N I2C master child ("downstream") ports, and
+  forwards transactions from upstream to the appropriate downstream port
+  with a modified slave address. The address used on the parent bus is
+  called the "alias" and is (potentially) different from the physical
+  slave address of the child bus. Address translation is done by the
+  hardware.
+
+properties:
+  i2c-alias-pool:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      I2C alias pool is a pool of I2C addresses on the main I2C bus that can be
+      used to access the remote peripherals on the serializer's I2C bus. The
+      addresses must be available, not used by any other peripheral. Each
+      remote peripheral is assigned an alias from the pool, and transactions to
+      that address will be forwarded to the remote peripheral, with the address
+      translated to the remote peripheral's real address. This property is not
+      needed if there are no I2C addressable remote peripherals.
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
deleted file mode 100644
index 86b2e433a969..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-Pinctrl-based I2C Bus DeMux
-
-This binding describes an I2C bus demultiplexer that uses pin multiplexing to
-route the I2C signals, and represents the pin multiplexing configuration using
-the pinctrl device tree bindings. This may be used to select one I2C IP core at
-runtime which may have a better feature set for a given task than another I2C
-IP core on the SoC. The most simple example is to fall back to GPIO bitbanging
-if your current runtime configuration hits an errata of the internal IP core.
-
-    +-------------------------------+
-    | SoC                           |
-    |                               |   +-----+  +-----+
-    |   +------------+              |   | dev |  | dev |
-    |   |I2C IP Core1|--\           |   +-----+  +-----+
-    |   +------------+   \-------+  |      |        |
-    |                    |Pinctrl|--|------+--------+
-    |   +------------+   +-------+  |
-    |   |I2C IP Core2|--/           |
-    |   +------------+              |
-    |                               |
-    +-------------------------------+
-
-Required properties:
-- compatible: "i2c-demux-pinctrl"
-- i2c-parent: List of phandles of I2C masters available for selection. The first
-	      one will be used as default.
-- i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C
-		parents.
-
-Furthermore, I2C mux properties and child nodes. See i2c-mux.yaml in this
-directory.
-
-Example:
-
-Here is a snipplet for a bus to be demuxed. It contains various i2c clients for
-HDMI, so the bus is named "i2c-hdmi":
-
-	i2chdmi: i2c@8 {
-
-		compatible = "i2c-demux-pinctrl";
-		i2c-parent = <&gpioi2c>, <&iic2>, <&i2c2>;
-		i2c-bus-name = "i2c-hdmi";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ak4643: sound-codec@12 {
-			compatible = "asahi-kasei,ak4643";
-
-			#sound-dai-cells = <0>;
-			reg = <0x12>;
-		};
-
-		composite-in@20 {
-			compatible = "adi,adv7180";
-			reg = <0x20>;
-			remote = <&vin1>;
-
-			port {
-				adv7180: endpoint {
-					bus-width = <8>;
-					remote-endpoint = <&vin1ep0>;
-				};
-			};
-		};
-
-		hdmi@39 {
-			compatible = "adi,adv7511w";
-			reg = <0x39>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-
-			adi,input-depth = <8>;
-			adi,input-colorspace = "rgb";
-			adi,input-clock = "1x";
-			adi,input-style = <1>;
-			adi,input-justification = "evenly";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					adv7511_in: endpoint {
-						remote-endpoint = <&du_out_lvds0>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					adv7511_out: endpoint {
-						remote-endpoint = <&hdmi_con>;
-					};
-				};
-			};
-		};
-	};
-
-And for clarification, here are the snipplets for the i2c-parents:
-
-	gpioi2c: i2c@9 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "i2c-gpio";
-		gpios = <&gpio5 6 GPIO_ACTIVE_HIGH /* sda */
-			 &gpio5 5 GPIO_ACTIVE_HIGH /* scl */
-			>;
-		i2c-gpio,delay-us = <5>;
-	};
-
-...
-
-&i2c2	{
-	pinctrl-0 = <&i2c2_pins>;
-	pinctrl-names = "i2c-hdmi";
-
-	clock-frequency = <100000>;
-};
-
-...
-
-&iic2	{
-	pinctrl-0 = <&iic2_pins>;
-	pinctrl-names = "i2c-hdmi";
-
-	clock-frequency = <100000>;
-};
-
-Please note:
-
-- pinctrl properties for the parent I2C controllers need a pinctrl state
-  with the same name as i2c-bus-name, not "default"!
-
-- the i2c masters must have their status "disabled". This driver will
-  enable them at runtime when needed.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
new file mode 100644
index 000000000000..1eaf00b90a77
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-demux-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pinctrl-based I2C Bus Demultiplexer
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+
+description: |
+  This binding describes an I2C bus demultiplexer that uses pin multiplexing to
+  route the I2C signals, and represents the pin multiplexing configuration
+  using the pinctrl device tree bindings.  This may be used to select one I2C
+  IP core at runtime which may have a better feature set for a given task than
+  another I2C IP core on the SoC.  The most simple example is to fall back to
+  GPIO bitbanging if your current runtime configuration hits an errata of the
+  internal IP core.
+
+      +-------------------------------+
+      | SoC                           |
+      |                               |   +-----+  +-----+
+      |   +------------+              |   | dev |  | dev |
+      |   |I2C IP Core1|--\           |   +-----+  +-----+
+      |   +------------+   \-------+  |      |        |
+      |                    |Pinctrl|--|------+--------+
+      |   +------------+   +-------+  |
+      |   |I2C IP Core2|--/           |
+      |   +------------+              |
+      |                               |
+      +-------------------------------+
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: i2c-demux-pinctrl
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      List of phandles of I2C masters available for selection.  The first one
+      will be used as default.
+
+  i2c-bus-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      The name of this bus.  Also needed as pinctrl-name for the I2C parents.
+
+required:
+  - compatible
+  - i2c-parent
+  - i2c-bus-name
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpioi2c2: i2c-9 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "i2c-gpio";
+        scl-gpios = <&gpio5 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+        sda-gpios = <&gpio5 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+        i2c-gpio,delay-us = <5>;
+
+        // The I2C controller must have its status "disabled".  The I2C bus
+        // demultiplexer will enable it at runtime when needed.
+        status = "disabled";
+    };
+
+    iic2: i2c@e6520000 {
+        reg = <0xe6520000 0x425>;
+        pinctrl-0 = <&iic2_pins>;
+        // The pinctrl property for the parent I2C controller needs a pinctrl
+        // state with the same name as i2c-bus-name in the I2C bus demultiplexer
+        // node, not "default"!
+        pinctrl-names = "i2c-hdmi";
+
+        clock-frequency = <100000>;
+
+        // The I2C controller must have its status "disabled".  The I2C bus
+        // demultiplexer will enable it at runtime when needed.
+        status = "disabled";
+    };
+
+    i2c2: i2c@e6530000 {
+        reg = <0 0xe6530000 0 0x40>;
+        pinctrl-0 = <&i2c2_pins>;
+        // The pinctrl property for the parent I2C controller needs a pinctrl
+        // state with the same name as i2c-bus-name in the I2C bus demultiplexer
+        // node, not "default"!
+        pinctrl-names = "i2c-hdmi";
+
+        clock-frequency = <100000>;
+
+        // The I2C controller must have its status "disabled".  The I2C bus
+        // demultiplexer will enable it at runtime when needed.
+        status = "disabled";
+    };
+
+    // Example for a bus to be demuxed.  It contains various I2C clients for
+    // HDMI, so the bus is named "i2c-hdmi":
+    i2chdmi: i2c-mux3 {
+        compatible = "i2c-demux-pinctrl";
+        i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>;
+        i2c-bus-name = "i2c-hdmi";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ak4643: codec@12 {
+            compatible = "asahi-kasei,ak4643";
+            #sound-dai-cells = <0>;
+            reg = <0x12>;
+        };
+
+        composite-in@20 {
+            compatible = "adi,adv7180";
+            reg = <0x20>;
+
+            port {
+                adv7180: endpoint {
+                    bus-width = <8>;
+                    remote-endpoint = <&vin1ep0>;
+                };
+            };
+        };
+
+        hdmi@39 {
+            compatible = "adi,adv7511w";
+            reg = <0x39>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&cec_clock>;
+            clock-names = "cec";
+
+            avdd-supply = <&fixedregulator1v8>;
+            dvdd-supply = <&fixedregulator1v8>;
+            pvdd-supply = <&fixedregulator1v8>;
+            dvdd-3v-supply = <&fixedregulator3v3>;
+            bgvdd-supply = <&fixedregulator1v8>;
+
+            adi,input-depth = <8>;
+            adi,input-colorspace = "rgb";
+            adi,input-clock = "1x";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    adv7511_in: endpoint {
+                        remote-endpoint = <&lvds0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    adv7511_out: endpoint {
+                        remote-endpoint = <&hdmi_con_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
deleted file mode 100644
index 3b30e54ae3c7..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Energymicro efm32 i2c controller
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible : should be "energymicro,efm32-i2c"
- - interrupts : the interrupt number
- - clocks : reference to the module clock
-
-Recommended properties :
-
- - clock-frequency : maximal I2C bus clock frequency in Hz.
- - energymicro,location : Decides the location of the USART I/O pins.
-   Allowed range : [0 .. 6]
-
-Example:
-	i2c0: i2c@4000a000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "energymicro,efm32-i2c";
-		reg = <0x4000a000 0x400>;
-		interrupts = <9>;
-		clocks = <&cmu clk_HFPERCLKI2C0>;
-		clock-frequency = <100000>;
-		energymicro,location = <3>;
-
-		eeprom@50 {
-			compatible = "microchip,24c02";
-			reg = <0x50>;
-			pagesize = <16>;
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
deleted file mode 100644
index 2dbc0b62daa6..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Samsung's High Speed I2C controller
-
-The Samsung's High Speed I2C controller is used to interface with I2C devices
-at various speeds ranging from 100khz to 3.4Mhz.
-
-Required properties:
-  - compatible: value should be.
-	-> "samsung,exynos5-hsi2c", (DEPRECATED)
-				for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5260 SoCs.
-	-> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
-				on Exynos7 SoCs.
-
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-  - #address-cells: always 1 (for i2c addresses)
-  - #size-cells: always 0
-
-  - Pinctrl:
-    - pinctrl-0: Pin control group to be used for this controller.
-    - pinctrl-names: Should contain only one value - "default".
-
-Optional properties:
-  - clock-frequency: Desired operating frequency in Hz of the bus.
-    -> If not specified, the bus operates in fast-speed mode at
-       at 100khz.
-    -> If specified, the bus operates in high-speed mode only if the
-       clock-frequency is >= 1Mhz.
-
-Example:
-
-hsi2c@12ca0000 {
-	compatible = "samsung,exynos5250-hsi2c";
-	reg = <0x12ca0000 0x100>;
-	interrupts = <56>;
-	clock-frequency = <100000>;
-
-	pinctrl-0 = <&i2c4_bus>;
-	pinctrl-names = "default";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
new file mode 100644
index 000000000000..32269239bae4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-exynos5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung's High Speed I2C controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung's High Speed I2C controller is used to interface with I2C devices
+  at various speeds ranging from 100kHz to 3.4MHz.
+
+  In case the HSI2C controller is encapsulated within USI block (it's the case
+  e.g. for Exynos850 and Exynos Auto V9 SoCs), it might be also necessary to
+  define USI node in device tree file, choosing "i2c" configuration. Please see
+  Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5250-hsi2c    # Exynos5250 and Exynos5420
+          - samsung,exynos5260-hsi2c    # Exynos5260
+          - samsung,exynos7-hsi2c       # Exynos7
+          - samsung,exynos8895-hsi2c
+          - samsung,exynosautov9-hsi2c
+      - items:
+          - enum:
+              - samsung,exynos5433-hsi2c
+              - samsung,exynos7870-hsi2c
+              - tesla,fsd-hsi2c
+          - const: samsung,exynos7-hsi2c
+      - items:
+          - enum:
+              - samsung,exynos8890-hsi2c
+          - const: samsung,exynos8895-hsi2c
+      - items:
+          - enum:
+              - google,gs101-hsi2c
+              - samsung,exynos2200-hsi2c
+              - samsung,exynos850-hsi2c
+              - samsung,exynos990-hsi2c
+          - const: samsung,exynosautov9-hsi2c
+      - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+    description:
+      Desired operating frequency in Hz of the bus.
+
+      If not specified, the bus operates in fast-speed mode at 100kHz.
+
+      If specified, the bus operates in high-speed mode only if the
+      clock-frequency is >= 1MHz.
+
+  clocks:
+    minItems: 1
+    items:
+      - description: I2C operating clock
+      - description: Bus clock (APB)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: hsi2c
+      - const: hsi2c_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov9-hsi2c
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+      required:
+        - clock-names
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hsi2c_8: i2c@12e00000 {
+        compatible = "samsung,exynos5250-hsi2c";
+        reg = <0x12e00000 0x1000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+        clocks = <&clock CLK_USI4>;
+        clock-names = "hsi2c";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    hsi2c_2: i2c@138c0000 {
+        compatible = "samsung,exynosautov9-hsi2c";
+        reg = <0x138c0000 0xc0>;
+        interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
+                 <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
+        clock-names = "hsi2c", "hsi2c_pclk";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt b/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
deleted file mode 100644
index b1be2ceb7e69..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-fsi.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Device-tree bindings for FSI-attached I2C master and busses
------------------------------------------------------------
-
-Required properties:
- - compatible = "ibm,i2c-fsi";
- - reg = < address size >;		: The FSI CFAM address and address
-					  space size.
- - #address-cells = <1>;		: Number of address cells in child
-					  nodes.
- - #size-cells = <0>;			: Number of size cells in child nodes.
- - child nodes				: Nodes to describe busses off the I2C
-					  master.
-
-Child node required properties:
- - reg = < port number >		: The port number on the I2C master.
-
-Child node optional properties:
- - child nodes				: Nodes to describe devices on the I2C
-					  bus.
-
-Examples:
-
-    i2c@1800 {
-        compatible = "ibm,i2c-fsi";
-        reg = < 0x1800 0x400 >;
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        i2c-bus@0 {
-            reg = <0>;
-        };
-
-        i2c-bus@1 {
-            reg = <1>;
-
-            eeprom@50 {
-                compatible = "vendor,dev-name";
-            };
-        };
-    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
index 66472f12a7e2..0cdc3e890df7 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
@@ -31,9 +31,8 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         ak8975@c {
-            compatible = "ak,ak8975";
+            compatible = "asahi-kasei,ak8975";
             reg = <0x0c>;
         };
     };
 ...
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
index fd040284561f..afd4925c2a7d 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for GPIO bitbanged I2C
+title: GPIO bitbanged I2C
 
 maintainers:
   - Wolfram Sang <wsa@kernel.org>
@@ -33,6 +33,10 @@ properties:
       open drain.
     maxItems: 1
 
+  i2c-gpio,sda-output-only:
+    description: sda as output only
+    type: boolean
+
   i2c-gpio,scl-output-only:
     description: scl as output only
     type: boolean
@@ -63,6 +67,28 @@ properties:
       GPIO line used for SCL into open drain mode, and that something is not
       the GPIO chip. It is essentially an inconsistency flag.
 
+  i2c-gpio,sda-has-no-pullup:
+    type: boolean
+    description: sda is used in a non-compliant way and has no pull-up.
+      Therefore disable open-drain. This property is mutually-exclusive
+      with i2c-gpio,sda-open-drain.
+
+  i2c-gpio,scl-has-no-pullup:
+    type: boolean
+    description: scl is used in a non-compliant way and has no pull-up.
+      Therefore disable open-drain. This property is mutually-exclusive
+      with i2c-gpio,scl-open-drain.
+
+dependencies:
+  i2c-gpio,sda-has-no-pullup:
+    not:
+      required:
+        - i2c-gpio,sda-open-drain
+  i2c-gpio,scl-has-no-pullup:
+    not:
+      required:
+        - i2c-gpio,scl-open-drain
+
 required:
   - compatible
   - sda-gpios
diff --git a/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt b/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt
deleted file mode 100644
index f98b37401e6e..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-hix5hd2.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-I2C for Hisilicon hix5hd2 chipset platform
-
-Required properties:
-- compatible: Must be "hisilicon,hix5hd2-i2c"
-- reg: physical base address of the controller and length of memory mapped
-     region.
-- interrupts: interrupt number to the cpu.
-- #address-cells = <1>;
-- #size-cells = <0>;
-- clocks: phandles to input clocks.
-
-Optional properties:
-- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
-- Child nodes conforming to i2c bus binding
-
-Examples:
-I2C0@f8b10000 {
-	compatible = "hisilicon,hix5hd2-i2c";
-	reg = <0xf8b10000 0x1000>;
-	interrupts = <0 38 4>;
-	clocks = <&clock HIX5HD2_I2C0_RST>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-}
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
index fe0c89edf7c1..969030a6f82a 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale Low Power Inter IC (LPI2C) for i.MX
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
@@ -20,7 +22,12 @@ properties:
       - items:
           - enum:
               - fsl,imx8qxp-lpi2c
+              - fsl,imx8dxl-lpi2c
               - fsl,imx8qm-lpi2c
+              - fsl,imx8ulp-lpi2c
+              - fsl,imx93-lpi2c
+              - fsl,imx94-lpi2c
+              - fsl,imx95-lpi2c
           - const: fsl,imx7ulp-lpi2c
 
   reg:
@@ -35,10 +42,22 @@ properties:
   clock-frequency: true
 
   clock-names:
-    maxItems: 1
+    items:
+      - const: per
+      - const: ipg
 
   clocks:
-    maxItems: 1
+    maxItems: 2
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for TX
+      - description: DMA controller phandle and request line for RX
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
 
   power-domains:
     maxItems: 1
@@ -61,5 +80,6 @@ examples:
         reg = <0x40A50000 0x10000>;
         interrupt-parent = <&intc>;
         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&clks IMX7ULP_CLK_LPI2C7>;
+        clocks = <&clks IMX7ULP_CLK_LPI2C7>,
+                 <&clks IMX7ULP_CLK_NIC1_BUS_DIV>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
index c167958ae2a9..0682a5a10d41 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
@@ -18,6 +18,18 @@ properties:
       - const: fsl,imx1-i2c
       - const: fsl,imx21-i2c
       - const: fsl,vf610-i2c
+      - const: nxp,s32g2-i2c
+      - items:
+          - enum:
+              - fsl,ls1012a-i2c
+              - fsl,ls1021a-i2c
+              - fsl,ls1028a-i2c
+              - fsl,ls1043a-i2c
+              - fsl,ls1046a-i2c
+              - fsl,ls1088a-i2c
+              - fsl,ls208xa-i2c
+              - fsl,lx2160a-i2c
+          - const: fsl,vf610-i2c
       - items:
           - const: fsl,imx35-i2c
           - const: fsl,imx1-i2c
@@ -43,6 +55,9 @@ properties:
               - fsl,imx8mn-i2c
               - fsl,imx8mp-i2c
           - const: fsl,imx21-i2c
+      - items:
+          - const: nxp,s32g3-i2c
+          - const: nxp,s32g2-i2c
 
   reg:
     maxItems: 1
@@ -88,9 +103,7 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/imx5-clock.h>
-    #include <dt-bindings/clock/vf610-clock.h>
-    #include <dt-bindings/gpio/gpio.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c@83fc4000 {
         compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -99,6 +112,9 @@ examples:
         clocks = <&clks IMX5_CLK_I2C2_GATE>;
     };
 
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
     i2c@40066000 {
         compatible = "fsl,vf610-i2c";
         reg = <0x40066000 0x1000>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt b/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
deleted file mode 100644
index 4101aa621ad4..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-NXP I2C controller for LPC2xxx/178x/18xx/43xx
-
-Required properties:
- - compatible: must be "nxp,lpc1788-i2c"
- - reg: physical address and length of the device registers
- - interrupts: a single interrupt specifier
- - clocks: clock for the device
- - #address-cells: should be <1>
- - #size-cells: should be <0>
-
-Optional properties:
-- clock-frequency: the desired I2C bus clock frequency in Hz; in
-  absence of this property the default value is used (100 kHz).
-
-Example:
-i2c0: i2c@400a1000 {
-	compatible = "nxp,lpc1788-i2c";
-	reg = <0x400a1000 0x1000>;
-	interrupts = <18>;
-	clocks = <&ccu1 CLK_APB1_I2C0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-
-	lm75@48 {
-		compatible = "nxp,lm75";
-		reg = <0x48>;
-	};
-};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
index 98c6fcf7bf26..b1d7d14c0be4 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
@@ -43,6 +43,7 @@ properties:
 
   fsl,timeout:
     $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
     description: |
       I2C bus timeout in microseconds
 
@@ -73,6 +74,7 @@ examples:
         clock-frequency = <100000>;
     };
 
+  - |
     /* MPC5200B based board */
     i2c@3d00 {
         #address-cells = <1>;
@@ -84,6 +86,7 @@ examples:
         fsl,preserve-clocking;
     };
 
+  - |
     /* MPC8544 base board */
     i2c@3100 {
         #address-cells = <1>;
@@ -93,6 +96,6 @@ examples:
         interrupts = <43 2>;
         interrupt-parent = <&mpic>;
         clock-frequency = <400000>;
-        fsl,timeout = <10000>;
+        i2c-transfer-timeout-us = <10000>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
deleted file mode 100644
index 5ea216ae7084..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* MediaTek's I2C controller
-
-The MediaTek's I2C controller is used to interface with I2C devices.
-
-Required properties:
-  - compatible: value should be either of the following.
-      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
-      "mediatek,mt2712-i2c": for MediaTek MT2712
-      "mediatek,mt6577-i2c": for MediaTek MT6577
-      "mediatek,mt6589-i2c": for MediaTek MT6589
-      "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797
-      "mediatek,mt7622-i2c": for MediaTek MT7622
-      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
-      "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
-      "mediatek,mt8173-i2c": for MediaTek MT8173
-      "mediatek,mt8183-i2c": for MediaTek MT8183
-      "mediatek,mt8192-i2c": for MediaTek MT8192
-      "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195
-      "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
-  - reg: physical base address of the controller and dma base, length of memory
-    mapped region.
-  - interrupts: interrupt number to the cpu.
-  - clock-div: the fixed value for frequency divider of clock source in i2c
-    module. Each IC may be different.
-  - clocks: clock name from clock manager
-  - clock-names: Must include "main" and "dma", "arb" is for multi-master that
-    one bus has more than two i2c controllers, if enable have-pmic need include
-    "pmic" extra.
-
-Optional properties:
-  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
-    is 100000.
-  - mediatek,have-pmic: platform can control i2c form special pmic side.
-    Only mt6589 and mt8135 support this feature.
-  - mediatek,use-push-pull: IO config use push-pull mode.
-  - vbus-supply: phandle to the regulator that provides power to SCL/SDA.
-
-Example:
-
-	i2c0: i2c@1100d000 {
-			compatible = "mediatek,mt6577-i2c";
-			reg = <0x1100d000 0x70>,
-			      <0x11000300 0x80>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-			clock-frequency = <400000>;
-			mediatek,have-pmic;
-			clock-div = <16>;
-			clocks = <&i2c0_ck>, <&ap_dma_ck>;
-			clock-names = "main", "dma";
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
new file mode 100644
index 000000000000..3562ce0c0f7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mt65xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek I2C controller
+
+description:
+  This driver interfaces with the native I2C controller present in
+  various MediaTek SoCs.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+maintainers:
+  - Qii Wang <qii.wang@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt2712-i2c
+      - const: mediatek,mt6577-i2c
+      - const: mediatek,mt6589-i2c
+      - const: mediatek,mt7622-i2c
+      - const: mediatek,mt7981-i2c
+      - const: mediatek,mt7986-i2c
+      - const: mediatek,mt8168-i2c
+      - const: mediatek,mt8173-i2c
+      - const: mediatek,mt8183-i2c
+      - const: mediatek,mt8186-i2c
+      - const: mediatek,mt8188-i2c
+      - const: mediatek,mt8192-i2c
+      - items:
+          - enum:
+              - mediatek,mt7629-i2c
+              - mediatek,mt8516-i2c
+          - const: mediatek,mt2712-i2c
+      - items:
+          - enum:
+              - mediatek,mt2701-i2c
+              - mediatek,mt6797-i2c
+              - mediatek,mt7623-i2c
+          - const: mediatek,mt6577-i2c
+      - items:
+          - enum:
+              - mediatek,mt8365-i2c
+          - const: mediatek,mt8168-i2c
+      - items:
+          - enum:
+              - mediatek,mt6795-i2c
+          - const: mediatek,mt8173-i2c
+      - items:
+          - enum:
+              - mediatek,mt6878-i2c
+              - mediatek,mt6991-i2c
+              - mediatek,mt8196-i2c
+          - const: mediatek,mt8188-i2c
+      - items:
+          - enum:
+              - mediatek,mt6893-i2c
+              - mediatek,mt8195-i2c
+          - const: mediatek,mt8192-i2c
+
+  reg:
+    items:
+      - description: Physical base address
+      - description: DMA base address
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: Main clock for I2C bus
+      - description: Clock for I2C via DMA
+      - description: Bus arbitrator clock
+      - description: Clock for I2C from PMIC
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: main
+      - const: dma
+      - const: arb
+      - const: pmic
+
+  clock-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Frequency divider of clock source in I2C module
+
+  clock-frequency:
+    default: 100000
+    description:
+      SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+  mediatek,have-pmic:
+    description: Platform controls I2C from PMIC side
+    type: boolean
+
+  mediatek,use-push-pull:
+    description: Use push-pull mode I/O config
+    type: boolean
+
+  vbus-supply:
+    description: Phandle to the regulator providing power to SCL/SDA
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-div
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0: i2c@1100d000 {
+      compatible = "mediatek,mt6577-i2c";
+      reg = <0x1100d000 0x70>, <0x11000300 0x80>;
+      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&i2c0_ck>, <&ap_dma_ck>;
+      clock-names = "main", "dma";
+      clock-div = <16>;
+      clock-frequency = <400000>;
+      mediatek,have-pmic;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt b/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
deleted file mode 100644
index bc36f0eb94cd..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek MT7621/MT7628 I2C master controller
-
-Required properties:
-
-- compatible: Should be one of the following:
-  - "mediatek,mt7621-i2c": for MT7621/MT7628/MT7688 platforms
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: Address and length of the register set for the device
-- resets: phandle to the reset controller asserting this device in
-          reset
-  See ../reset/reset.txt for details.
-
-Optional properties :
-
-Example:
-
-i2c: i2c@900 {
-	compatible = "mediatek,mt7621-i2c";
-	reg = <0x900 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	resets = <&rstctrl 16>;
-	reset-names = "i2c";
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
deleted file mode 100644
index d4cf10582a26..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-GPIO-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses GPIOs to
-route the I2C signals.
-
-                                  +-----+  +-----+
-                                  | dev |  | dev |
-    +------------+                +-----+  +-----+
-    | SoC        |                   |        |
-    |            |          /--------+--------+
-    |   +------+ |  +------+    child bus A, on GPIO value set to 0
-    |   | I2C  |-|--| Mux  |
-    |   +------+ |  +--+---+    child bus B, on GPIO value set to 1
-    |            |     |    \----------+--------+--------+
-    |   +------+ |     |               |        |        |
-    |   | GPIO |-|-----+            +-----+  +-----+  +-----+
-    |   +------+ |                  | dev |  | dev |  | dev |
-    +------------+                  +-----+  +-----+  +-----+
-
-Required properties:
-- compatible: i2c-mux-gpio
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-- mux-gpios: list of gpios used to control the muxer
-* Standard I2C mux properties. See i2c-mux.yaml in this directory.
-* I2C child bus nodes. See i2c-mux.yaml in this directory.
-
-Optional properties:
-- idle-state: value to set the muxer to when idle. When no value is
-  given, it defaults to the last value used.
-
-For each i2c child node, an I2C child bus will be created. They will
-be numbered based on their order in the device tree.
-
-Whenever an access is made to a device on a child bus, the value set
-in the relevant node's reg property will be output using the list of
-GPIOs, the first in the list holding the least-significant value.
-
-If an idle state is defined, using the idle-state (optional) property,
-whenever an access is not being made to a device on a child bus, the
-GPIOs will be set according to the idle value.
-
-If an idle state is not defined, the most recently used value will be
-left programmed into hardware whenever no access is being made to a
-device on a child bus.
-
-Example:
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-		i2c-parent = <&i2c1>;
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ssd1307: oled@3c {
-				compatible = "solomon,ssd1307fb-i2c";
-				reg = <0x3c>;
-				pwms = <&pwm 4 3000>;
-				reset-gpios = <&gpio2 7 1>;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				compatible = "nxp,pca9555";
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
new file mode 100644
index 000000000000..4a93d1f78f93
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses GPIOs to route the I2C signals.
+
+                                  +-----+  +-----+
+                                  | dev |  | dev |
+    +------------+                +-----+  +-----+
+    | SoC        |                   |        |
+    |            |          /--------+--------+
+    |   +------+ |  +------+    child bus A, on GPIO value set to 0
+    |   | I2C  |-|--| Mux  |
+    |   +------+ |  +--+---+    child bus B, on GPIO value set to 1
+    |            |     |    \----------+--------+--------+
+    |   +------+ |     |               |        |        |
+    |   | GPIO |-|-----+            +-----+  +-----+  +-----+
+    |   +------+ |                  | dev |  | dev |  | dev |
+    +------------+                  +-----+  +-----+  +-----+
+
+  For each I2C child node, an I2C child bus will be created. They will be numbered based on their
+  order in the device tree.
+
+  Whenever an access is made to a device on a child bus, the value set in the relevant node's reg
+  property will be output using the list of GPIOs, the first in the list holding the least-
+  significant value.
+
+  If an idle state is defined, using the idle-state (optional) property, whenever an access is not
+  being made to a device on a child bus, the GPIOs will be set according to the idle value.
+
+  If an idle state is not defined, the most recently used value will be left programmed into
+  hardware whenever no access is being made to a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-gpio
+
+  i2c-parent:
+    description: phandle of the I2C bus that this multiplexer's master-side port is connected to
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  mux-gpios:
+    description: list of GPIOs used to control the muxer
+    minItems: 1
+    maxItems: 4  # Should be enough
+
+  idle-state:
+    description: Value to set the muxer to when idle. When no value is given, it defaults to the
+      last value used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  settle-time-us:
+    description: Delay to wait before doing any transfer when a new bus gets selected.
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+  - mux-gpios
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mux-gpios = <&gpio1 22 0>, <&gpio1 23 0>;
+      i2c-parent = <&i2c1>;
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ssd1307: oled@3c {
+          compatible = "solomon,ssd1307fb-i2c";
+          reg = <0x3c>;
+          pwms = <&pwm 4 3000>;
+          reset-gpios = <&gpio2 7 1>;
+        };
+      };
+
+      i2c@3 {
+        reg = <3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pca9555: pca9555@20 {
+          compatible = "nxp,pca9555";
+          gpio-controller;
+          #gpio-cells = <2>;
+          reg = <0x20>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
index 9b0603a72f40..d8610daa10cd 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
@@ -27,8 +27,6 @@ description: |+
       |   '------' |                  | dev |  | dev |  | dev |
       '------------'                  '-----'  '-----'  '-----'
 
-
-
 allOf:
   - $ref: /schemas/i2c/i2c-mux.yaml#
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
index 9f1726d0356b..9aa0585200c9 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
@@ -4,21 +4,29 @@
 $id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP PCA954x I2C bus switch
+title: NXP PCA954x I2C and compatible bus switches
 
 maintainers:
   - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
 description:
-  The binding supports NXP PCA954x and PCA984x I2C mux/switch devices.
-
-allOf:
-  - $ref: /schemas/i2c/i2c-mux.yaml#
+  The NXP PCA954x and compatible devices are I2C bus
+  multiplexer/switches that share the same functionality
+  and register layout.
+  The devices usually have 4 or 8 child buses, which are
+  attached to the parent bus by using the SMBus "Send Byte"
+  command.
 
 properties:
   compatible:
     oneOf:
       - enum:
+          - maxim,max7356
+          - maxim,max7357
+          - maxim,max7358
+          - maxim,max7367
+          - maxim,max7368
+          - maxim,max7369
           - nxp,pca9540
           - nxp,pca9542
           - nxp,pca9543
@@ -59,10 +67,64 @@ properties:
     description: if present, overrides i2c-mux-idle-disconnect
     $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state
 
+  vdd-supply:
+    description: A voltage regulator supplying power to the chip. On PCA9846
+      the regulator supplies power to VDD2 (core logic) and optionally to VDD1.
+
+  maxim,isolate-stuck-channel:
+    type: boolean
+    description: Allows to use non faulty channels while a stuck channel is
+      isolated from the upstream bus. If not set all channels are isolated from
+      the upstream bus until the fault is cleared.
+
+  maxim,send-flush-out-sequence:
+    type: boolean
+    description: Send a flush-out sequence to stuck auxiliary buses
+      automatically after a stuck channel is being detected.
+
+  maxim,preconnection-wiggle-test-enable:
+    type: boolean
+    description: Send a STOP condition to the auxiliary buses when the switch
+      register activates a channel to detect a stuck high fault. On fault the
+      channel is isolated from the upstream bus.
+
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/i2c/i2c-mux.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - maxim,max7367
+                - maxim,max7369
+                - nxp,pca9542
+                - nxp,pca9543
+                - nxp,pca9544
+                - nxp,pca9545
+    then:
+      properties:
+        interrupts: false
+        "#interrupt-cells": false
+        interrupt-controller: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - maxim,max7357
+    then:
+      properties:
+        maxim,isolate-stuck-channel: false
+        maxim,send-flush-out-sequence: false
+        maxim,preconnection-wiggle-test-enable: false
+
 unevaluatedProperties: false
 
 examples:
@@ -74,11 +136,13 @@ examples:
         #size-cells = <0>;
 
         i2c-mux@74 {
-            compatible = "nxp,pca9548";
+            compatible = "nxp,pca9545";
             #address-cells = <1>;
             #size-cells = <0>;
             reg = <0x74>;
 
+            vdd-supply = <&p3v3>;
+
             interrupt-parent = <&ipic>;
             interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
             interrupt-controller;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
deleted file mode 100644
index 997a287ed3f6..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Pinctrl-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses pin multiplexing to
-route the I2C signals, and represents the pin multiplexing configuration
-using the pinctrl device tree bindings.
-
-                                 +-----+  +-----+
-                                 | dev |  | dev |
-    +------------------------+   +-----+  +-----+
-    | SoC                    |      |        |
-    |                   /----|------+--------+
-    |   +---+   +------+     | child bus A, on first set of pins
-    |   |I2C|---|Pinmux|     |
-    |   +---+   +------+     | child bus B, on second set of pins
-    |                   \----|------+--------+--------+
-    |                        |      |        |        |
-    +------------------------+  +-----+  +-----+  +-----+
-                                | dev |  | dev |  | dev |
-                                +-----+  +-----+  +-----+
-
-Required properties:
-- compatible: i2c-mux-pinctrl
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-
-Also required are:
-
-* Standard pinctrl properties that specify the pin mux state for each child
-  bus. See ../pinctrl/pinctrl-bindings.txt.
-
-* Standard I2C mux properties. See i2c-mux.yaml in this directory.
-
-* I2C child bus nodes. See i2c-mux.yaml in this directory.
-
-For each named state defined in the pinctrl-names property, an I2C child bus
-will be created. I2C child bus numbers are assigned based on the index into
-the pinctrl-names property.
-
-The only exception is that no bus will be created for a state named "idle". If
-such a state is defined, it must be the last entry in pinctrl-names. For
-example:
-
-	pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
-	pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
-	pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
-
-Whenever an access is made to a device on a child bus, the relevant pinctrl
-state will be programmed into hardware.
-
-If an idle state is defined, whenever an access is not being made to a device
-on a child bus, the idle pinctrl state will be programmed into hardware.
-
-If an idle state is not defined, the most recently used pinctrl state will be
-left programmed into hardware whenever no access is being made of a device on
-a child bus.
-
-Example:
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&i2c1>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
new file mode 100644
index 000000000000..2e3d555eb96c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pinctrl-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C
+  signals, and represents the pin multiplexing configuration using the pinctrl device tree
+  bindings.
+
+                                 +-----+  +-----+
+                                 | dev |  | dev |
+    +------------------------+   +-----+  +-----+
+    | SoC                    |      |        |
+    |                   /----|------+--------+
+    |   +---+   +------+     | child bus A, on first set of pins
+    |   |I2C|---|Pinmux|     |
+    |   +---+   +------+     | child bus B, on second set of pins
+    |                   \----|------+--------+--------+
+    |                        |      |        |        |
+    +------------------------+  +-----+  +-----+  +-----+
+                                | dev |  | dev |  | dev |
+                                +-----+  +-----+  +-----+
+
+  For each named state defined in the pinctrl-names property, an I2C child bus will be created.
+  I2C child bus numbers are assigned based on the index into the pinctrl-names property.
+
+  The only exception is that no bus will be created for a state named "idle". If such a state is
+  defined, it must be the last entry in pinctrl-names. For example:
+
+    pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
+    pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
+    pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
+
+  Whenever an access is made to a device on a child bus, the relevant pinctrl state will be
+  programmed into hardware.
+
+  If an idle state is defined, whenever an access is not being made to a device on a child bus,
+  the idle pinctrl state will be programmed into hardware.
+
+  If an idle state is not defined, the most recently used pinctrl state will be left programmed
+  into hardware whenever no access is being made of a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-pinctrl
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the I2C bus that this multiplexer's master-side port is connected
+      to.
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2c-parent = <&i2c1>;
+
+      pinctrl-names = "ddc", "pta", "idle";
+      pinctrl-0 = <&state_i2cmux_ddc>;
+      pinctrl-1 = <&state_i2cmux_pta>;
+      pinctrl-2 = <&state_i2cmux_idle>;
+
+      i2c@0 {
+        reg = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
index 21ae7bce038e..171a41407241 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.yaml
@@ -9,6 +9,9 @@ title: Freescale MXS Inter IC (I2C) Controller
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
 
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
 properties:
   compatible:
     enum:
@@ -37,7 +40,7 @@ required:
   - dmas
   - dma-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt b/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
deleted file mode 100644
index 72065b0ff680..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-I2C for Nomadik based systems
-
-Required (non-standard) properties:
- - Nil
-
-Recommended (non-standard) properties:
- - clock-frequency : Maximum bus clock frequency for the device
-
-Optional (non-standard) properties:
- - Nil
-
-Example :
-
-i2c@80004000 {
-        compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-        reg = <0x80004000 0x1000>;
-        interrupts = <0 21 0x4>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        v-i2c-supply = <&db8500_vape_reg>;
-
-        clock-frequency = <400000>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
deleted file mode 100644
index a37c9455b244..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device tree configuration for i2c-ocores
-
-Required properties:
-- compatible      : "opencores,i2c-ocores"
-                    "aeroflexgaisler,i2cmst"
-                    "sifive,fu540-c000-i2c", "sifive,i2c0"
-                    For Opencore based I2C IP block reimplemented in
-                    FU540-C000 SoC.
-                    "sifive,fu740-c000-i2c", "sifive,i2c0"
-                    For Opencore based I2C IP block reimplemented in
-                    FU740-C000 SoC.
-                    Please refer to sifive-blocks-ip-versioning.txt for
-                    additional details.
-- reg             : bus address start and address range size of device
-- clocks          : handle to the controller clock; see the note below.
-                    Mutually exclusive with opencores,ip-clock-frequency
-- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
-                    see the note below. Mutually exclusive with clocks
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Optional properties:
-- interrupts      : interrupt number.
-- clock-frequency : frequency of bus clock in Hz; see the note below.
-                    Defaults to 100 KHz when the property is not specified
-- reg-shift       : device register offsets are shifted by this value
-- reg-io-width    : io register width in bytes (1, 2 or 4)
-- regstep         : deprecated, use reg-shift above
-
-Note
-clock-frequency property is meant to control the bus frequency for i2c bus
-drivers, but it was incorrectly used to specify i2c controller input clock
-frequency. So the following rules are set to fix this situation:
-- if clock-frequency is present and neither opencores,ip-clock-frequency nor
-  clocks are, then clock-frequency specifies i2c controller clock frequency.
-  This is to keep backwards compatibility with setups using old DTB. i2c bus
-  frequency is fixed at 100 KHz.
-- if clocks is present it specifies i2c controller clock. clock-frequency
-  property specifies i2c bus frequency.
-- if opencores,ip-clock-frequency is present it specifies i2c controller
-  clock frequency. clock-frequency property specifies i2c bus frequency.
-
-Examples:
-
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		opencores,ip-clock-frequency = <20000000>;
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
-or
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		clocks = <&osc>;
-		clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt b/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
deleted file mode 100644
index 2a59006cf79e..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-pnx.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* NXP PNX I2C Controller
-
-Required properties:
-
- - reg: Offset and length of the register set for the device
- - compatible: should be "nxp,pnx-i2c"
- - interrupts: configure one interrupt line
- - #address-cells: always 1 (for i2c addresses)
- - #size-cells: always 0
-
-Optional properties:
-
- - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
-
-Examples:
-
-	i2c1: i2c@400a0000 {
-		compatible = "nxp,pnx-i2c";
-		reg = <0x400a0000 0x100>;
-		interrupt-parent = <&mic>;
-		interrupts = <51 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	i2c2: i2c@400a8000 {
-		compatible = "nxp,pnx-i2c";
-		reg = <0x400a8000 0x100>;
-		interrupt-parent = <&mic>;
-		interrupts = <50 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clock-frequency = <100000>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
index 015885dd02d3..e89ee361741e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/i2c/i2c-pxa.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MMP I2C controller bindings
+title: Marvell MMP I2C controller
 
 maintainers:
-  - Rob Herring <robh+dt@kernel.org>
+  - Rob Herring <robh@kernel.org>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
deleted file mode 100644
index 7b9fc0c22eaf..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Qualcomm Camera Control Interface (CCI) I2C controller
-
-PROPERTIES:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		"qcom,msm8916-cci"
-		"qcom,msm8996-cci"
-		"qcom,sdm845-cci"
-		"qcom,sm8250-cci"
-
-- reg
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address CCI I2C controller and length of memory
-		    mapped region.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: specifies the CCI I2C interrupt. The format of the
-		    specifier is defined by the binding document describing
-		    the node's interrupt parent.
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: a list of phandle, should contain an entry for each
-		    entries in clock-names.
-
-- clock-names
-	Usage: required
-	Value type: <string>
-	Definition: a list of clock names, must include "cci" clock.
-
-- power-domains
-	Usage: required for "qcom,msm8996-cci"
-	Value type: <prop-encoded-array>
-	Definition:
-
-SUBNODES:
-
-The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996,
-sdm845 and sm8250), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
-
-PROPERTIES:
-
-- reg:
-	Usage: required
-	Value type: <u32>
-	Definition: Index of the CCI bus/master
-
-- clock-frequency:
-	Usage: optional
-	Value type: <u32>
-	Definition: Desired I2C bus clock frequency in Hz, defaults to 100
-		    kHz if omitted.
-
-Example:
-
-	cci@a0c000 {
-		compatible = "qcom,msm8996-cci";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xa0c000 0x1000>;
-		interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
-			 <&mmcc CAMSS_TOP_AHB_CLK>,
-			 <&mmcc CAMSS_CCI_AHB_CLK>,
-			 <&mmcc CAMSS_CCI_CLK>,
-			 <&mmcc CAMSS_AHB_CLK>;
-		clock-names = "mmss_mmagic_ahb",
-			      "camss_top_ahb",
-			      "cci_ahb",
-			      "cci",
-			      "camss_ahb";
-
-		i2c-bus@0 {
-			reg = <0>;
-			clock-frequency = <400000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c-bus@1 {
-			reg = <1>;
-			clock-frequency = <400000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
index 5339dd4fc370..91805fe8f393 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
@@ -29,6 +29,7 @@ properties:
       - items:
           - enum:
               - rockchip,rk3036-i2c
+              - rockchip,rk3128-i2c
               - rockchip,rk3368-i2c
           - const: rockchip,rk3288-i2c
       - items:
@@ -36,7 +37,13 @@ properties:
               - rockchip,px30-i2c
               - rockchip,rk3308-i2c
               - rockchip,rk3328-i2c
+              - rockchip,rk3506-i2c
+              - rockchip,rk3528-i2c
+              - rockchip,rk3562-i2c
               - rockchip,rk3568-i2c
+              - rockchip,rk3576-i2c
+              - rockchip,rk3588-i2c
+              - rockchip,rv1126-i2c
           - const: rockchip,rk3399-i2c
 
   reg:
@@ -99,6 +106,9 @@ properties:
       (t(f) in the I2C specification). If not specified we will use the SCL
       value since they are the same in nearly all cases.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
deleted file mode 100644
index 66ae46d3bc2f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Samsung's I2C controller
-
-The Samsung's I2C controller is used to interface with I2C devices.
-
-Required properties:
-  - compatible: value should be either of the following.
-      (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
-      (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
-      (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
-          inside HDMIPHY block found on several samsung SoCs
-      (d) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as
-	   a host to SATA PHY controller on an internal bus.
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-  - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
-
-Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
-  - Samsung GPIO variant (deprecated):
-    - gpios: The order of the gpios should be the following: <SDA, SCL>.
-      The gpio specifier depends on the gpio controller. Required in all
-      cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
-      lines are permanently wired to the respective clienta
-  - Pinctrl variant (preferred, if available):
-    - pinctrl-0: Pin control group to be used for this controller.
-    - pinctrl-names: Should contain only one value - "default".
-
-Optional properties:
-  - samsung,i2c-slave-addr: Slave address in multi-master environment. If not
-    specified, default value is 0.
-  - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
-    specified, the default value in Hz is 100000.
-  - samsung,sysreg-phandle - handle to syscon used to control the system registers
-
-Example:
-
-	i2c@13870000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <345>;
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <100000>;
-		/* Samsung GPIO variant begins here */
-		gpios = <&gpd1 2 0 /* SDA */
-			 &gpd1 3 0 /* SCL */>;
-		/* Samsung GPIO variant ends here */
-		/* Pinctrl variant begins here */
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		/* Pinctrl variant ends here */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wm8994@1a {
-			compatible = "wlf,wm8994";
-			reg = <0x1a>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
deleted file mode 100644
index 60b7cda15dd2..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-I2C for Spreadtrum platforms
-
-Required properties:
-- compatible: Should be "sprd,sc9860-i2c".
-- reg: Specify the physical base address of the controller and length
-  of memory mapped region.
-- interrupts: Should contain I2C interrupt.
-- clock-names: Should contain following entries:
-  "i2c" for I2C clock,
-  "source" for I2C source (parent) clock,
-  "enable" for I2C module enable clock.
-- clocks: Should contain a clock specifier for each entry in clock-names.
-- clock-frequency: Constains desired I2C bus clock frequency in Hz.
-- #address-cells: Should be 1 to describe address cells for I2C device address.
-- #size-cells: Should be 0 means no size cell for I2C device address.
-
-Optional properties:
-- Child nodes conforming to I2C bus binding
-
-Examples:
-i2c0: i2c@70500000 {
-	compatible = "sprd,sc9860-i2c";
-	reg = <0 0x70500000 0 0x1000>;
-	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "i2c", "source", "enable";
-	clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
-	clock-frequency = <400000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-st.txt b/Documentation/devicetree/bindings/i2c/i2c-st.txt
deleted file mode 100644
index 4c26fda3844a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-st.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-ST SSC binding, for I2C mode operation
-
-Required properties :
-- compatible : Must be "st,comms-ssc-i2c" or "st,comms-ssc4-i2c"
-- reg : Offset and length of the register set for the device
-- interrupts : the interrupt specifier
-- clock-names: Must contain "ssc".
-- clocks: Must contain an entry for each name in clock-names. See the common
-  clock bindings.
-- A pinctrl state named "default" must be defined to set pins in mode of
-  operation for I2C transfer.
-
-Optional properties :
-- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
-  the default 100 kHz frequency will be used. As only Normal and Fast modes
-  are supported, possible values are 100000 and 400000.
-- st,i2c-min-scl-pulse-width-us : The minimum valid SCL pulse width that is
-  allowed through the deglitch circuit. In units of us.
-- st,i2c-min-sda-pulse-width-us : The minimum valid SDA pulse width that is
-  allowed through the deglitch circuit. In units of us.
-- A pinctrl state named "idle" could be defined to set pins in idle state
-  when I2C instance is not performing a transfer.
-- A pinctrl state named "sleep" could be defined to set pins in sleep state
-  when driver enters in suspend.
-
-
-
-Example :
-
-i2c0: i2c@fed40000 {
-	compatible	= "st,comms-ssc4-i2c";
-	reg		= <0xfed40000 0x110>;
-	interrupts	=  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-	clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-	clock-names	= "ssc";
-	clock-frequency = <400000>;
-	pinctrl-names	= "default";
-	pinctrl-0	= <&pinctrl_i2c0_default>;
-	st,i2c-min-scl-pulse-width-us = <0>;
-	st,i2c-min-sda-pulse-width-us = <5>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-synquacer.txt b/Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
deleted file mode 100644
index 72f4a2f0fedc..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Socionext SynQuacer I2C
-
-Required properties:
-- compatible      : Must be "socionext,synquacer-i2c"
-- reg             : Offset and length of the register set for the device
-- interrupts      : A single interrupt specifier
-- #address-cells  : Must be <1>;
-- #size-cells     : Must be <0>;
-- clock-names     : Must contain "pclk".
-- clocks          : Must contain an entry for each name in clock-names.
-                    (See the common clock bindings.)
-
-Optional properties:
-- clock-frequency : Desired I2C bus clock frequency in Hz. As only Normal and
-                    Fast modes are supported, possible values are 100000 and
-                    400000.
-
-Example :
-
-    i2c@51210000 {
-        compatible = "socionext,synquacer-i2c";
-        reg = <0x51210000 0x1000>;
-        interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        clock-names = "pclk";
-        clocks = <&clk_i2c>;
-        clock-frequency = <400000>;
-    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-versatile.txt b/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
deleted file mode 100644
index 361d31c51b6f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-i2c Controller on ARM Versatile platform:
-
-Required properties:
-- compatible : Must be "arm,versatile-i2c";
-- reg
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
diff --git a/Documentation/devicetree/bindings/i2c/i2c-wmt.txt b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
deleted file mode 100644
index 94a425eaa6c7..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Wondermedia I2C Controller
-
-Required properties :
-
- - compatible : should be "wm,wm8505-i2c"
- - reg : Offset and length of the register set for the device
- - interrupts : <IRQ> where IRQ is the interrupt number
- - clocks : phandle to the I2C clock source
-
-Optional properties :
-
- - clock-frequency : desired I2C bus clock frequency in Hz.
-	Valid values are 100000 and 400000.
-	Default to 100000 if not specified, or invalid value.
-
-Example :
-
-	i2c_0: i2c@d8280000 {
-		compatible = "wm,wm8505-i2c";
-		reg = <0xd8280000 0x1000>;
-		interrupts = <19>;
-		clocks = <&clki2c0>;
-		clock-frequency = <400000>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt b/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt
deleted file mode 100644
index f6b2c20cfbf6..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-APM X-Gene SLIMpro Mailbox I2C Driver
-
-An I2C controller accessed over the "SLIMpro" mailbox.
-
-Required properties :
-
- - compatible : should be "apm,xgene-slimpro-i2c"
- - mboxes : use the label reference for the mailbox as the first parameter.
-	    The second parameter is the channel number.
-
-Example :
-	i2cslimpro {
-		compatible = "apm,xgene-slimpro-i2c";
-		mboxes = <&mailbox 0>;
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
deleted file mode 100644
index b864916e087f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Generic device tree bindings for I2C busses
-===========================================
-
-This document describes generic bindings which can be used to describe I2C
-busses and their child devices in a device tree.
-
-Required properties (per bus)
------------------------------
-
-- #address-cells  - should be <1>. Read more about addresses below.
-- #size-cells     - should be <0>.
-- compatible      - name of I2C bus controller
-
-For other required properties e.g. to describe register sets,
-clocks, etc. check the binding documentation of the specific driver.
-
-The cells properties above define that an address of children of an I2C bus
-are described by a single value.
-
-Optional properties (per bus)
------------------------------
-
-These properties may not be supported by all drivers. However, if a driver
-wants to support one of the below features, it should adapt these bindings.
-
-- clock-frequency
-	frequency of bus clock in Hz.
-
-- i2c-bus
-	For I2C adapters that have child nodes that are a mixture of both I2C
-	devices and non-I2C devices, the 'i2c-bus' subnode can be used for
-	populating I2C devices. If the 'i2c-bus' subnode is present, only
-	subnodes of this will be considered as I2C slaves. The properties,
-	'#address-cells' and '#size-cells' must be defined under this subnode
-	if present.
-
-- i2c-scl-falling-time-ns
-	Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
-	specification.
-
-- i2c-scl-internal-delay-ns
-	Number of nanoseconds the IP core additionally needs to setup SCL.
-
-- i2c-scl-rising-time-ns
-	Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
-	specification.
-
-- i2c-sda-falling-time-ns
-	Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
-	specification.
-
-- i2c-analog-filter
-	Enable analog filter for i2c lines.
-
-- i2c-digital-filter
-	Enable digital filter for i2c lines.
-
-- i2c-digital-filter-width-ns
-	Width of spikes which can be filtered by digital filter
-	(i2c-digital-filter). This width is specified in nanoseconds.
-
-- i2c-analog-filter-cutoff-frequency
-	Frequency that the analog filter (i2c-analog-filter) uses to distinguish
-	which signal to filter. Signal with higher frequency than specified will
-	be filtered out. Only lower frequency will pass (this is applicable to
-	a low-pass analog filter). Typical value should be above the normal
-	i2c bus clock frequency (clock-frequency).
-	Specified in Hz.
-
-- multi-master
-	states that there is another master active on this bus. The OS can use
-	this information to adapt power management to keep the arbitration awake
-	all the time, for example. Can not be combined with 'single-master'.
-
-- pinctrl
-	add extra pinctrl to configure SCL/SDA pins to GPIO function for bus
-	recovery, call it "gpio" or "recovery" (deprecated) state
-
-- scl-gpios
-	specify the gpio related to SCL pin. Used for GPIO bus recovery.
-
-- sda-gpios
-	specify the gpio related to SDA pin. Optional for GPIO bus recovery.
-
-- single-master
-	states that there is no other master active on this bus. The OS can use
-	this information to detect a stalled bus more reliably, for example.
-	Can not be combined with 'multi-master'.
-
-- smbus
-	states that additional SMBus restrictions and features apply to this bus.
-	An example of feature is SMBusHostNotify. Examples of restrictions are
-	more reserved addresses and timeout definitions.
-
-- smbus-alert
-	states that the optional SMBus-Alert feature apply to this bus.
-
-Required properties (per child device)
---------------------------------------
-
-- compatible
-	name of I2C slave device
-
-- reg
-	One or many I2C slave addresses. These are usually a 7 bit addresses.
-	However, flags can be attached to an address. I2C_TEN_BIT_ADDRESS is
-	used to mark a 10 bit address. It is needed to avoid the ambiguity
-	between e.g. a 7 bit address of 0x50 and a 10 bit address of 0x050
-	which, in theory, can be on the same bus.
-	Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we
-	listen to be devices ourselves.
-
-Optional properties (per child device)
---------------------------------------
-
-These properties may not be supported by all drivers. However, if a driver
-wants to support one of the below features, it should adapt these bindings.
-
-- host-notify
-	device uses SMBus host notify protocol instead of interrupt line.
-
-- interrupts
-	interrupts used by the device.
-
-- interrupt-names
-	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
-	other names are	left to individual drivers.
-
-- reg-names
-	Names of map programmable addresses.
-	It can contain any map needing another address than default one.
-
-- wakeup-source
-	device can be used as a wakeup source.
-
-Binding may contain optional "interrupts" property, describing interrupts
-used by the device. I2C core will assign "irq" interrupt (or the very first
-interrupt if not using interrupt names) as primary interrupt for the slave.
-
-Alternatively, devices supporting SMBus Host Notify, and connected to
-adapters that support this feature, may use "host-notify" property. I2C
-core will create a virtual interrupt for Host Notify and assign it as
-primary interrupt for the slave.
-
-Also, if device is marked as a wakeup source, I2C core will set up "wakeup"
-interrupt for the device. If "wakeup" interrupt name is not present in the
-binding, then primary interrupt will be used as wakeup interrupt.
diff --git a/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
new file mode 100644
index 000000000000..40ea82942e4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/ibm,i2c-fsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM FSI-attached I2C controller
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  This I2C controller is an FSI CFAM engine, providing access to a number of
+  I2C busses. Therefore this node will always be a child of an FSI CFAM node.
+
+properties:
+  compatible:
+    enum:
+      - ibm,i2c-fsi
+
+  reg:
+    items:
+      - description: FSI slave address
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^i2c-bus@[0-9a-f]+$":
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+    allOf:
+      - $ref: /schemas/i2c/i2c-controller.yaml#
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@1800 {
+        compatible = "ibm,i2c-fsi";
+        reg = <0x1800 0x400>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-bus@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        i2c-bus@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eeprom@50 {
+                compatible = "atmel,24c64";
+                reg = <0x50>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt
deleted file mode 100644
index 5dc5d2e2573d..000000000000
--- a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Device-tree bindings for I2C-based On-Chip Controller hwmon device
-------------------------------------------------------------------
-
-Required properties:
- - compatible = "ibm,p8-occ-hwmon";
- - reg = <I2C address>;			: I2C bus address
-
-Examples:
-
-    i2c-bus@100 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        clock-frequency = <100000>;
-        < more properties >
-
-        occ-hwmon@1 {
-            compatible = "ibm,p8-occ-hwmon";
-            reg = <0x50>;
-        };
-
-        occ-hwmon@2 {
-            compatible = "ibm,p8-occ-hwmon";
-            reg = <0x51>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
index febde6cc5f69..b61fdc9548d8 100644
--- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs I2C controller devicetree bindings
+title: Ingenic SoCs I2C controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
@@ -69,8 +69,7 @@ examples:
       #size-cells = <0>;
       reg = <0x10054000 0x1000>;
 
-      interrupt-parent = <&intc>;
-      interrupts = <56>;
+      interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
 
       clocks = <&cgu JZ4780_CLK_SMB4>;
       pinctrl-names = "default";
@@ -86,7 +85,6 @@ examples:
         compatible = "nxp,pcf8563";
         reg = <0x51>;
 
-        interrupt-parent = <&gpf>;
         interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
       };
     };
diff --git a/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml b/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml
new file mode 100644
index 000000000000..67882ec6e06a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/loongson,ls2x-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson LS2X I2C Controller
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-i2c
+      - loongson,ls7a-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0: i2c@1fe21000 {
+        compatible = "loongson,ls2k-i2c";
+        reg = <0x1fe21000 0x8>;
+        interrupt-parent = <&extioiic>;
+        interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@57 {
+            compatible = "atmel,24c16";
+            reg = <0x57>;
+            pagesize = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
index f771c09aabfc..c4efcef59133 100644
--- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MV64XXX I2C Controller Device Tree Bindings
+title: Marvell MV64XXX I2C Controller
 
 maintainers:
   - Gregory CLEMENT <gregory.clement@bootlin.com>
@@ -19,12 +19,22 @@ properties:
       - const: allwinner,sun6i-a31-i2c
       - items:
           - enum:
+              - allwinner,suniv-f1c100s-i2c
               - allwinner,sun8i-a23-i2c
               - allwinner,sun8i-a83t-i2c
+              - allwinner,sun8i-v536-i2c
               - allwinner,sun50i-a64-i2c
-              - allwinner,sun50i-a100-i2c
               - allwinner,sun50i-h6-i2c
+          - const: allwinner,sun6i-a31-i2c
+      - description: Allwinner SoCs with offload support
+        items:
+          - enum:
+              - allwinner,sun20i-d1-i2c
+              - allwinner,sun50i-a100-i2c
               - allwinner,sun50i-h616-i2c
+              - allwinner,sun50i-r329-i2c
+              - allwinner,sun55i-a523-i2c
+          - const: allwinner,sun8i-v536-i2c
           - const: allwinner,sun6i-a31-i2c
       - const: marvell,mv64xxx-i2c
       - const: marvell,mv78230-i2c
@@ -58,6 +68,19 @@ properties:
   resets:
     maxItems: 1
 
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+dependencies:
+  dmas: [ dma-names ]
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml
new file mode 100644
index 000000000000..118ec00fc190
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/mediatek,mt7621-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Stefan Roese <sr@denx.de>
+
+title: Mediatek MT7621/MT7628 I2C master controller
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-i2c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: i2c
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: i2c
+
+required:
+  - compatible
+  - reg
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7621-clk.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    i2c: i2c@900 {
+      compatible = "mediatek,mt7621-i2c";
+      reg = <0x900 0x100>;
+      clocks = <&sysc MT7621_CLK_I2C>;
+      clock-names = "i2c";
+      resets = <&sysc MT7621_RST_I2C>;
+      reset-names = "i2c";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&i2c_pins>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
deleted file mode 100644
index 93198d5d43a6..000000000000
--- a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
+++ /dev/null
@@ -1,77 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/i2c/mellanox,i2c-mlxbf.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mellanox I2C SMBus on BlueField SoCs
-
-maintainers:
-  - Khalil Blaiech <kblaiech@nvidia.com>
-
-allOf:
-  - $ref: /schemas/i2c/i2c-controller.yaml#
-
-properties:
-  compatible:
-    enum:
-      - mellanox,i2c-mlxbf1
-      - mellanox,i2c-mlxbf2
-
-  reg:
-    minItems: 3
-    items:
-      - description: Smbus block registers
-      - description: Cause master registers
-      - description: Cause slave registers
-      - description: Cause coalesce registers
-
-  interrupts:
-    maxItems: 1
-
-  clock-frequency:
-    enum: [ 100000, 400000, 1000000 ]
-    description:
-      bus frequency used to configure timing registers;
-      The frequency is expressed in Hz. Default is 100000.
-
-required:
-  - compatible
-  - reg
-  - interrupts
-
-unevaluatedProperties: false
-
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - mellanox,i2c-mlxbf1
-
-then:
-  properties:
-    reg:
-      maxItems: 3
-
-examples:
-  - |
-    i2c@2804000 {
-        compatible = "mellanox,i2c-mlxbf1";
-        reg = <0x02804000 0x800>,
-              <0x02801200 0x020>,
-              <0x02801260 0x020>;
-        interrupts = <57>;
-        clock-frequency = <100000>;
-    };
-
-  - |
-    i2c@2808800 {
-        compatible = "mellanox,i2c-mlxbf2";
-        reg = <0x02808800 0x600>,
-              <0x02808e00 0x020>,
-              <0x02808e20 0x020>,
-              <0x02808e40 0x010>;
-        interrupts = <57>;
-        clock-frequency = <400000>;
-    };
diff --git a/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
new file mode 100644
index 000000000000..6ff58b64d496
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/microchip,corei2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS I2C Controller
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - microchip,pic64gx-i2c
+              - microchip,mpfs-i2c # Microchip PolarFire SoC compatible SoCs
+          - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+      - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. As only Standard and Fast
+      modes are supported, possible values are 100000 and 400000.
+    enum: [100000, 400000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@2010a000 {
+      compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
+      reg = <0x2010a000 0x1000>;
+      clocks = <&clkcfg 15>;
+      interrupt-parent = <&plic>;
+      interrupts = <58>;
+      clock-frequency = <100000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
index 128444942aec..00eb6ff6f5b1 100644
--- a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -4,20 +4,21 @@
 $id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
+title: nuvoton NPCM7XX I2C Controller
 
 description: |
-  The NPCM750x includes sixteen I2C bus controllers. All Controllers support
-  both master and slave mode. Each controller can switch between master and slave
-  at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
-  RX.
+  I2C bus controllers of the NPCM series support both master and
+  slave mode. Each controller can switch between master and slave at run time
+  (i.e. IPMB mode). HW FIFO for TX and RX are supported.
 
 maintainers:
   - Tali Perry <tali.perry1@gmail.com>
 
 properties:
   compatible:
-    const: nuvoton,npcm750-i2c
+    enum:
+      - nuvoton,npcm750-i2c
+      - nuvoton,npcm845-i2c
 
   reg:
     maxItems: 1
@@ -36,6 +37,10 @@ properties:
     default: 100000
     enum: [100000, 400000, 1000000]
 
+  nuvoton,sys-mgr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of system manager register node.
+
 required:
   - compatible
   - reg
@@ -44,6 +49,15 @@ required:
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nuvoton,npcm845-i2c
+
+    then:
+      required:
+        - nuvoton,sys-mgr
 
 unevaluatedProperties: false
 
@@ -57,6 +71,7 @@ examples:
         clock-frequency = <100000>;
         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
         compatible = "nuvoton,npcm750-i2c";
+        nuvoton,sys-mgr = <&gcr>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
deleted file mode 100644
index ab240e10debc..000000000000
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-NVIDIA Tegra186 BPMP I2C controller
-
-In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW
-devices, such as the I2C controller for the power management I2C bus. Software
-running on other CPUs must perform IPC to the BPMP in order to execute
-transactions on that I2C bus. This binding describes an I2C bus that is
-accessed in such a fashion.
-
-The BPMP I2C node must be located directly inside the main BPMP node. See
-../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding.
-
-This node represents an I2C controller. See ../i2c/i2c.txt for details of the
-core I2C binding.
-
-Required properties:
-- compatible:
-    Array of strings.
-    One of:
-    - "nvidia,tegra186-bpmp-i2c".
-- #address-cells: Address cells for I2C device address.
-    Single-cell integer.
-    Must be <1>.
-- #size-cells:
-    Single-cell integer.
-    Must be <0>.
-- nvidia,bpmp-bus-id:
-    Single-cell integer.
-    Indicates the I2C bus number this DT node represent, as defined by the
-    BPMP firmware.
-
-Example:
-
-bpmp {
-	...
-
-	i2c {
-		compatible = "nvidia,tegra186-bpmp-i2c";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		nvidia,bpmp-bus-id = <5>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
new file mode 100644
index 000000000000..8676335e9e94
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra186-bpmp-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) BPMP I2C controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  In Tegra186 and later, the BPMP (Boot and Power Management Processor)
+  owns certain HW devices, such as the I2C controller for the power
+  management I2C bus. Software running on other CPUs must perform IPC to
+  the BPMP in order to execute transactions on that I2C bus. This
+  binding describes an I2C bus that is accessed in such a fashion.
+
+  The BPMP I2C node must be located directly inside the main BPMP node.
+  See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP
+  binding.
+
+  This node represents an I2C controller.
+
+properties:
+  compatible:
+    const: nvidia,tegra186-bpmp-i2c
+
+  nvidia,bpmp-bus-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Indicates the I2C bus number this DT node represents,
+      as defined by the BPMP firmware.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - nvidia,bpmp-bus-id
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
deleted file mode 100644
index 3f2f990c2e62..000000000000
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
-
-Required properties:
-- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or
-  "nvidia,tegra20-i2c".  For Tegra30, must be "nvidia,tegra30-i2c".
-  For Tegra114, must be "nvidia,tegra114-i2c".  Otherwise, must be
-  "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is
-  tegra124, tegra132, or tegra210.
-  Details of compatible are as follows:
-  nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
-	controller. This only support master mode of I2C communication. Register
-	interface/offset and interrupts handling are different than generic I2C
-	controller. Driver of DVC I2C controller is only compatible with
-	"nvidia,tegra20-i2c-dvc".
-  nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
-	master and slave mode of I2C communication. The i2c-tegra driver only
-	support master mode of I2C communication. Driver of I2C controller is
-	only compatible with "nvidia,tegra20-i2c".
-  nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
-	very much similar to Tegra20 I2C controller with additional feature:
-	Continue Transfer Support. This feature helps to implement M_NO_START
-	as per I2C core API transfer flags. Driver of I2C controller is
-	compatible with "nvidia,tegra30-i2c" to enable the continue transfer
-	support. This is also compatible with "nvidia,tegra20-i2c" without
-	continue transfer support.
-  nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
-	very much similar to Tegra30 I2C controller with some hardware
-	modification:
-	 - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
-	   fast-clk. Tegra114 has only one clock source called as div-clk and
-	   hence clock mechanism is changed in I2C controller.
-	 - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
-	   default and there is no way to disable it. Tegra114 has this
-	   interrupt disable by default and SW need to enable explicitly.
-	Due to above changes, Tegra114 I2C driver makes incompatible with
-	previous hardware driver. Hence, tegra114 I2C controller is compatible
-	with "nvidia,tegra114-i2c".
-  nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is on host1x bus
-	and is part of VE power domain and typically used for camera use-cases.
-	This VI I2C controller is mostly compatible with the programming model
-	of the regular I2C controllers with a few exceptions. The I2C registers
-	start at an offset of 0xc00 (instead of 0), registers are 16 bytes
-	apart (rather than 4) and the controller does not support slave mode.
-- reg: Should contain I2C controller registers physical address and length.
-- interrupts: Should contain I2C controller interrupts.
-- address-cells: Address cells for I2C device address.
-- size-cells: Size of the I2C device address.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  Tegra20/Tegra30:
-  - div-clk
-  - fast-clk
-  Tegra114:
-  - div-clk
-  Tegra210:
-  - div-clk
-  - slow (only for nvidia,tegra210-i2c-vi compatible node)
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - i2c
-- power-domains: Only for nvidia,tegra210-i2c-vi compatible node and must
-  include venc powergate node as vi i2c is part of VE power domain.
-  tegra210-i2c-vi:
-  - pd_venc
-- dmas: Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names: Must include the following entries:
-  - rx
-  - tx
-
-Example:
-
-	i2c@7000c000 {
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000c000 0x100>;
-		interrupts = <0 38 0x04>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car 12>, <&tegra_car 124>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
new file mode 100644
index 000000000000..51241c1293e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra20-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+title: NVIDIA Tegra I2C controller driver
+
+properties:
+  compatible:
+    oneOf:
+      - description: Tegra20 has 4 generic I2C controller. This can support
+          master and slave mode of I2C communication. The i2c-tegra driver
+          only support master mode of I2C communication. Driver of I2C
+          controller is only compatible with "nvidia,tegra20-i2c".
+        const: nvidia,tegra20-i2c
+      - description: Tegra20 has specific I2C controller called as DVC I2C
+          controller. This only support master mode of I2C communication.
+          Register interface/offset and interrupts handling are different than
+          generic I2C controller. Driver of DVC I2C controller is only
+          compatible with "nvidia,tegra20-i2c-dvc".
+        const: nvidia,tegra20-i2c-dvc
+      - description: |
+          Tegra30 has 5 generic I2C controller. This controller is very much
+          similar to Tegra20 I2C controller with additional feature: Continue
+          Transfer Support. This feature helps to implement M_NO_START as per
+          I2C core API transfer flags. Driver of I2C controller is compatible
+          with "nvidia,tegra30-i2c" to enable the continue transfer support.
+          This is also compatible with "nvidia,tegra20-i2c" without continue
+          transfer support.
+        items:
+          - const: nvidia,tegra30-i2c
+          - const: nvidia,tegra20-i2c
+      - description: |
+          Tegra114 has 5 generic I2C controllers. This controller is very much
+          similar to Tegra30 I2C controller with some hardware modification:
+            - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk
+              and fast-clk. Tegra114 has only one clock source called as
+              div-clk and hence clock mechanism is changed in I2C controller.
+            - Tegra30/Tegra20 I2C controller has enabled per packet transfer
+              by default and there is no way to disable it. Tegra114 has this
+              interrupt disable by default and SW need to enable explicitly.
+          Due to above changes, Tegra114 I2C driver makes incompatible with
+          previous hardware driver. Hence, Tegra114 I2C controller is
+          compatible with "nvidia,tegra114-i2c".
+        const: nvidia,tegra114-i2c
+      - description: |
+          Tegra124 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra114 but also contain several hardware
+          improvements and new registers.
+        const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra124.
+        items:
+          - const: nvidia,tegra210-i2c
+          - const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has one I2C controller that is on host1x bus and is part of
+          the VE power domain and typically used for camera use-cases. This VI
+          I2C controller is mostly compatible with the programming model of
+          the regular I2C controllers with a few exceptions. The I2C registers
+          start at an offset of 0xc00 (instead of 0), registers are 16 bytes
+          apart (rather than 4) and the controller does not support slave
+          mode.
+        const: nvidia,tegra210-i2c-vi
+      - description: |
+          Tegra186 has 9 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra210.
+        const: nvidia,tegra186-i2c
+      - description: |
+          Tegra194 has 8 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra186. However, these controllers have
+          support for 64 KiB transactions whereas earlier chips supported no
+          more than 4 KiB per transactions.
+        const: nvidia,tegra194-i2c
+      - description: |
+          Tegra256 has 8 generic I2C controllers. The controllers are similar to
+          the previous generations, but have a different parent clock and hence
+          the timing parameters are configured differently.
+        const: nvidia,tegra256-i2c
+      - description:
+          Tegra264 has 17 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. In addition to the features from
+          Tegra194, a SW mutex register is added to support use of the same I2C
+          instance across multiple firmwares.
+        const: nvidia,tegra264-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    items:
+      - description:
+          Module reset. This property is optional for controllers in Tegra194,
+          Tegra234 etc where an internal software reset is available as an
+          alternative.
+
+  reset-names:
+    items:
+      - const: i2c
+
+  power-domains:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DMA channel for the reception FIFO
+      - description: DMA channel for the transmission FIFO
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-i2c
+              - nvidia,tegra30-i2c
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: div-clk
+            - const: fast-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra114-i2c
+              - nvidia,tegra210-i2c
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: div-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-i2c-vi
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: div-clk
+            - const: slow
+        power-domains:
+          items:
+            - description: phandle to the VENC power domain
+    else:
+      properties:
+        power-domains: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - nvidia,tegra194-i2c
+                - nvidia,tegra256-i2c
+                - nvidia,tegra264-i2c
+    then:
+      required:
+        - resets
+        - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7000c000 {
+        compatible = "nvidia,tegra20-i2c";
+        reg = <0x7000c000 0x100>;
+        interrupts = <0 38 0x04>;
+        clocks = <&tegra_car 12>, <&tegra_car 124>;
+        clock-names = "div-clk", "fast-clk";
+        resets = <&tegra_car 12>;
+        reset-names = "i2c";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml b/Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml
new file mode 100644
index 000000000000..9a1b95c2d03c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nxp,lpc1788-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP I2C controller for LPC2xxx/178x/18xx/43xx
+
+maintainers:
+  - Vladimir Zapolskiy <vz@mleia.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: nxp,lpc1788-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: the desired I2C bus clock frequency in Hz
+    default: 100000
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/lpc18xx-ccu.h"
+
+    i2c@400a1000 {
+        compatible = "nxp,lpc1788-i2c";
+        reg = <0x400a1000 0x1000>;
+        interrupts = <18>;
+        clocks = <&ccu1 CLK_APB1_I2C0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt b/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
deleted file mode 100644
index 42bfc09c8918..000000000000
--- a/Documentation/devicetree/bindings/i2c/nxp,pca9541.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* NXP PCA9541 I2C bus master selector
-
-Required Properties:
-
-  - compatible: Must be "nxp,pca9541"
-
-  - reg: The I2C address of the device.
-
-  The following required properties are defined externally:
-
-  - I2C arbitration bus node. See i2c-arb.txt in this directory.
-
-
-Example:
-
-	i2c-arbitrator@74 {
-		compatible = "nxp,pca9541";
-		reg = <0x74>;
-
-		i2c-arb {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom@54 {
-				compatible = "atmel,24c08";
-				reg = <0x54>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/nxp,pca9541.yaml b/Documentation/devicetree/bindings/i2c/nxp,pca9541.yaml
new file mode 100644
index 000000000000..b65c25c1a435
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nxp,pca9541.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nxp,pca9541.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA9541 I2C bus master selector
+
+maintainers:
+  - Peter Rosin <peda@axentia.se>
+
+properties:
+  compatible:
+    const: nxp,pca9541
+
+  reg:
+    maxItems: 1
+
+  i2c-arb:
+    type: object
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+    description:
+      I2C arbitration bus node.
+
+required:
+  - compatible
+  - reg
+  - i2c-arb
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c-arbitrator@74 {
+            compatible = "nxp,pca9541";
+            reg = <0x74>;
+
+            i2c-arb {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                eeprom@54 {
+                    compatible = "atmel,24c08";
+                    reg = <0x54>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml
new file mode 100644
index 000000000000..e645784b77d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nxp,pnx-i2c.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nxp,pnx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PNX I2C Controller
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: nxp,pnx-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@400a0000 {
+        compatible = "nxp,pnx-i2c";
+        reg = <0x400a0000 0x100>;
+        interrupt-parent = <&mic>;
+        interrupts = <51 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
new file mode 100644
index 000000000000..d9ef86729011
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenCores I2C controller
+
+maintainers:
+  - Peter Korsgaard <peter@korsgaard.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC
+              - sifive,fu540-c000-i2c # Opencore based IP block FU540-C000 SoC
+          - const: sifive,i2c0
+      - enum:
+          - opencores,i2c-ocores
+          - aeroflexgaisler,i2cmst
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      clock-frequency property is meant to control the bus frequency for i2c bus
+      drivers, but it was incorrectly used to specify i2c controller input clock
+      frequency. So the following rules are set to fix this situation:
+      - if clock-frequency is present and neither opencores,ip-clock-frequency nor
+        clocks are, then clock-frequency specifies i2c controller clock frequency.
+        This is to keep backwards compatibility with setups using old DTB. i2c bus
+        frequency is fixed at 100 KHz.
+      - if clocks is present it specifies i2c controller clock. clock-frequency
+        property specifies i2c bus frequency.
+      - if opencores,ip-clock-frequency is present it specifies i2c controller
+        clock frequency. clock-frequency property specifies i2c bus frequency.
+    default: 100000
+
+  reg-io-width:
+    description: |
+      io register width in bytes
+    enum: [1, 2, 4]
+
+  reg-shift:
+    description: |
+      device register offsets are shifted by this value
+    default: 0
+
+  regstep:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      deprecated, use reg-shift above
+    deprecated: true
+
+  opencores,ip-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Frequency of the controller clock in Hz. Mutually exclusive with clocks.
+      See the note above.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+oneOf:
+  - required:
+      - opencores,ip-clock-frequency
+  - required:
+      - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@a0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      opencores,ip-clock-frequency = <20000000>;
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+
+    i2c@b0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      clocks = <&osc>;
+      clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
new file mode 100644
index 000000000000..33852a5ffca8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -0,0 +1,367 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Control Interface (CCI) I2C controller
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,msm8226-cci
+          - qcom,msm8953-cci
+          - qcom,msm8974-cci
+          - qcom,msm8996-cci
+
+      - items:
+          - enum:
+              - qcom,msm8916-cci
+          - const: qcom,msm8226-cci # CCI v1
+
+      - items:
+          - enum:
+              - qcom,kaanapali-cci
+              - qcom,qcm2290-cci
+              - qcom,sa8775p-cci
+              - qcom,sc7280-cci
+              - qcom,sc8280xp-cci
+              - qcom,sdm670-cci
+              - qcom,sdm845-cci
+              - qcom,sm6350-cci
+              - qcom,sm8250-cci
+              - qcom,sm8450-cci
+              - qcom,sm8550-cci
+              - qcom,sm8650-cci
+              - qcom,x1e80100-cci
+          - const: qcom,msm8996-cci # CCI v2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 6
+
+  clock-names:
+    minItems: 2
+    maxItems: 6
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^i2c-bus@[01]$":
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clock-frequency:
+        default: 100000
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-cci
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-cci
+              - qcom,msm8916-cci
+    then:
+      properties:
+        i2c-bus@1: false
+
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - contains:
+                enum:
+                  - qcom,msm8974-cci
+
+            - const: qcom,msm8226-cci
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,kaanapali-cci
+              - qcom,qcm2290-cci
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: ahb
+            - const: cci
+
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - contains:
+                enum:
+                  - qcom,msm8916-cci
+                  - qcom,msm8953-cci
+
+            - const: qcom,msm8996-cci
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+            - const: camss_ahb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm670-cci
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: soc_ahb
+            - const: cpas_ahb
+            - const: cci
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-cci
+              - qcom,sm6350-cci
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: soc_ahb
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-cci
+              - qcom,sm8250-cci
+              - qcom,sm8450-cci
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-cci
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-cci
+              - qcom,sm8550-cci
+              - qcom,sm8650-cci
+              - qcom,x1e80100-cci
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: cpas_ahb
+            - const: cci
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cci@ac4a000 {
+        reg = <0x0ac4a000 0x4000>;
+        compatible = "qcom,sdm845-cci", "qcom,msm8996-cci";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+        power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+        clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                 <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+                 <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                 <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK_SRC>;
+        clock-names = "camnoc_axi",
+                      "soc_ahb",
+                      "slow_ahb_src",
+                      "cpas_ahb",
+                      "cci",
+                      "cci_src";
+
+        assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                          <&clock_camcc CAM_CC_CCI_CLK>;
+        assigned-clock-rates = <80000000>,
+                               <37500000>;
+
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&cci0_default &cci1_default>;
+        pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+        i2c-bus@0 {
+            reg = <0>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@10 {
+                compatible = "ovti,ov8856";
+                reg = <0x10>;
+
+                reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam0_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+                clock-names = "xvclk";
+                assigned-clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+                assigned-clock-rates = <19200000>;
+
+                dovdd-supply = <&vreg_lvs1a_1p8>;
+                avdd-supply = <&cam0_avdd_2v8>;
+                dvdd-supply = <&cam0_dvdd_1v2>;
+
+                port {
+                    ov8856_ep: endpoint {
+                        link-frequencies = /bits/ 64 <360000000 180000000>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csiphy0_ep>;
+                    };
+                };
+            };
+        };
+
+        cci_i2c1: i2c-bus@1 {
+            reg = <1>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@60 {
+                compatible = "ovti,ov7251";
+                reg = <0x60>;
+
+                enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam3_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+                clock-names = "xclk";
+                assigned-clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+                assigned-clock-rates = <24000000>;
+
+                vdddo-supply = <&vreg_lvs1a_1p8>;
+                vdda-supply = <&cam3_avdd_2v8>;
+
+                port {
+                    ov7251_ep: endpoint {
+                        data-lanes = <0>;
+                        link-frequencies = /bits/ 64 <240000000 319200000>;
+                        remote-endpoint = <&csiphy3_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
new file mode 100644
index 000000000000..51534953a69c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Geni based QUP I2C Controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-i2c
+      - qcom,geni-i2c-master-hub
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - clocks
+  - clock-names
+  - reg
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - $ref: /schemas/soc/qcom/qcom,se-common-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,geni-i2c-master-hub
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: se
+            - const: core
+
+        dmas: false
+        dma-names: false
+
+        interconnects:
+          maxItems: 2
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          const: se
+
+        interconnects:
+          minItems: 3
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+            - const: qup-memory
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    i2c@88000 {
+        compatible = "qcom,geni-i2c";
+        reg = <0x00880000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_i2c0_default>;
+        interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+                        <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "qup-core", "qup-config", "qup-memory";
+        power-domains = <&rpmhpd SC7180_CX>;
+        required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
deleted file mode 100644
index dc71754a56af..000000000000
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Qualcomm Universal Peripheral (QUP) I2C controller
-
-Required properties:
- - compatible: Should be:
-   * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
-   * "qcom,i2c-qup-v2.1.1" for 8974 v1.
-   * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
- - reg: Should contain QUP register address and length.
- - interrupts: Should contain I2C interrupt.
-
- - clocks: A list of phandles + clock-specifiers, one for each entry in
-   clock-names.
- - clock-names: Should contain:
-   * "core" for the core clock
-   * "iface" for the AHB clock
-
- - #address-cells: Should be <1> Address cells for i2c device address
- - #size-cells: Should be <0> as i2c addresses have no size component
-
-Optional properties:
- - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
-                    defaults to 100kHz if omitted.
-
-Child nodes should conform to i2c bus binding.
-
-Example:
-
- i2c@f9924000 {
- 	compatible = "qcom,i2c-qup-v2.2.1";
- 	reg = <0xf9924000 0x1000>;
- 	interrupts = <0 96 0>;
-
- 	clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- 	clock-names = "core", "iface";
-
- 	clock-frequency = <355000>;
-
- 	#address-cells = <1>;
- 	#size-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
new file mode 100644
index 000000000000..06a04db3eda2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Peripheral (QUP) I2C controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,i2c-qup-v1.1.1     # for 8660, 8960 and 8064
+      - qcom,i2c-qup-v2.1.1     # for 8974 v1
+      - qcom,i2c-qup-v2.2.1     # for 8974 v2 and later
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/interconnect/qcom,msm8996.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    i2c@c175000 {
+        compatible = "qcom,i2c-qup-v2.2.1";
+        reg = <0x0c175000 0x600>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+                 <&gcc GCC_BLSP1_AHB_CLK>;
+        clock-names = "core", "iface";
+        dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+        dma-names = "tx", "rx";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&blsp1_i2c1_default>;
+        pinctrl-1 = <&blsp1_i2c1_sleep>;
+        power-domains = <&rpmpd MSM8909_VDDCX>;
+        required-opps = <&rpmpd_opp_svs_krait>;
+        interconnects = <&pnoc MASTER_BLSP_1 &bimc SLAVE_EBI_CH0>;
+        clock-frequency = <400000>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
new file mode 100644
index 000000000000..f9a449fee2b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/realtek,rtl9301-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek RTL I2C Controller
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+description:
+  RTL9300 SoCs have two I2C controllers. Each of these has an SCL line (which
+  if not-used for SCL can be a GPIO). There are 8 common SDA lines that can be
+  assigned to either I2C controller.
+  RTL9310 SoCs have equal capabilities but support 12 common SDA lines which
+  can be assigned to either I2C controller.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - realtek,rtl9302b-i2c
+              - realtek,rtl9302c-i2c
+              - realtek,rtl9303-i2c
+          - const: realtek,rtl9301-i2c
+      - items:
+          - enum:
+              - realtek,rtl9311-i2c
+              - realtek,rtl9312-i2c
+              - realtek,rtl9313-i2c
+          - const: realtek,rtl9310-i2c
+      - enum:
+          - realtek,rtl9301-i2c
+          - realtek,rtl9310-i2c
+
+  reg:
+    items:
+      - description: Register offset and size of this I2C controller.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  realtek,scl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The SCL line number of this I2C controller.
+    enum: [ 0, 1 ]
+
+patternProperties:
+  '^i2c@[0-9ab]$':
+    $ref: /schemas/i2c/i2c-controller.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The SDA line number associated with the I2C bus.
+        maxItems: 1
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: realtek,rtl9310-i2c
+    then:
+      required:
+        - realtek,scl
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: realtek,rtl9301-i2c
+    then:
+      patternProperties:
+        '^i2c@[89ab]$': false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c@36c {
+      compatible = "realtek,rtl9301-i2c";
+      reg = <0x36c 0x14>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2c@2 {
+        reg = <2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
index 17c1102562be..551cfa6f885a 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
@@ -44,11 +44,11 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     iic0: i2c@e0070000 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            compatible = "renesas,iic-emev2";
-            reg = <0xe0070000 0x28>;
-            interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
-            clocks = <&iic0_sclk>;
-            clock-names = "sclk";
+        compatible = "renesas,iic-emev2";
+        reg = <0xe0070000 0x28>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&iic0_sclk>;
+        clock-names = "sclk";
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
index 052aad44e781..6cc60c3f61cd 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
@@ -46,9 +46,16 @@ properties:
               - renesas,i2c-r8a77980     # R-Car V3H
               - renesas,i2c-r8a77990     # R-Car E3
               - renesas,i2c-r8a77995     # R-Car D3
-              - renesas,i2c-r8a779a0     # R-Car V3U
           - const: renesas,rcar-gen3-i2c # R-Car Gen3 and RZ/G2
 
+      - items:
+          - enum:
+              - renesas,i2c-r8a779a0     # R-Car V3U
+              - renesas,i2c-r8a779f0     # R-Car S4-8
+              - renesas,i2c-r8a779g0     # R-Car V4H
+              - renesas,i2c-r8a779h0     # R-Car V4M
+          - const: renesas,rcar-gen4-i2c # R-Car Gen4
+
   reg:
     maxItems: 1
 
@@ -132,6 +139,7 @@ allOf:
             enum:
               - renesas,rcar-gen2-i2c
               - renesas,rcar-gen3-i2c
+              - renesas,rcar-gen4-i2c
     then:
       required:
         - resets
@@ -145,14 +153,14 @@ examples:
     #include <dt-bindings/power/r8a7791-sysc.h>
 
     i2c0: i2c@e6508000 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
-            reg = <0xe6508000 0x40>;
-            interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-            clock-frequency = <400000>;
-            clocks = <&cpg CPG_MOD 931>;
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-            resets = <&cpg 931>;
-            i2c-scl-internal-delay-ns = <6>;
+        compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c";
+        reg = <0xe6508000 0x40>;
+        interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+        clock-frequency = <400000>;
+        clocks = <&cpg CPG_MOD 931>;
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 931>;
+        i2c-scl-internal-delay-ns = <6>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
index 402fd125e010..6876eade431b 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@@ -10,42 +10,69 @@ maintainers:
   - Chris Brandt <chris.brandt@renesas.com>
   - Wolfram Sang <wsa+renesas@sang-engineering.com>
 
-allOf:
-  - $ref: /schemas/i2c/i2c-controller.yaml#
-
 properties:
   compatible:
-    items:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,riic-r7s72100   # RZ/A1H
+              - renesas,riic-r7s9210    # RZ/A2M
+              - renesas,riic-r9a07g043  # RZ/G2UL and RZ/Five
+              - renesas,riic-r9a07g044  # RZ/G2{L,LC}
+              - renesas,riic-r9a07g054  # RZ/V2L
+          - const: renesas,riic-rz      # RZ/A or RZ/G2L
+
+      - items:
+          - enum:
+              - renesas,riic-r9a08g045   # RZ/G3S
+              - renesas,riic-r9a09g047   # RZ/G3E
+              - renesas,riic-r9a09g056   # RZ/V2N
+          - const: renesas,riic-r9a09g057   # RZ/V2H(P)
+
       - enum:
-          - renesas,riic-r7s72100   # RZ/A1H
-          - renesas,riic-r7s9210    # RZ/A2M
-          - renesas,riic-r9a07g044  # RZ/G2{L,LC}
-      - const: renesas,riic-rz      # RZ/A or RZ/G2L
+          - renesas,riic-r9a09g057   # RZ/V2H(P)
+          - renesas,riic-r9a09g077   # RZ/T2H
+
+      - items:
+          - const: renesas,riic-r9a09g087  # RZ/N2H
+          - const: renesas,riic-r9a09g077  # RZ/T2H
 
   reg:
     maxItems: 1
 
   interrupts:
-    items:
-      - description: Transmit End Interrupt
-      - description: Receive Data Full Interrupt
-      - description: Transmit Data Empty Interrupt
-      - description: Stop Condition Detection Interrupt
-      - description: Start Condition Detection Interrupt
-      - description: NACK Reception Interrupt
-      - description: Arbitration-Lost Interrupt
-      - description: Timeout Interrupt
+    oneOf:
+      - items:
+          - description: Transmit End Interrupt
+          - description: Receive Data Full Interrupt
+          - description: Transmit Data Empty Interrupt
+          - description: Stop Condition Detection Interrupt
+          - description: Start Condition Detection Interrupt
+          - description: NACK Reception Interrupt
+          - description: Arbitration-Lost Interrupt
+          - description: Timeout Interrupt
+      - items:
+          - description: Transfer Error Or Event Generation
+          - description: Receive Data Full Interrupt
+          - description: Transmit Data Empty Interrupt
+          - description: Transmit End Interrupt
 
   interrupt-names:
-    items:
-      - const: tei
-      - const: ri
-      - const: ti
-      - const: spi
-      - const: sti
-      - const: naki
-      - const: ali
-      - const: tmoi
+    oneOf:
+      - items:
+          - const: tei
+          - const: ri
+          - const: ti
+          - const: spi
+          - const: sti
+          - const: naki
+          - const: ali
+          - const: tmoi
+      - items:
+          - const: eei
+          - const: rxi
+          - const: txi
+          - const: tei
 
   clock-frequency:
     description:
@@ -58,6 +85,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -69,15 +99,40 @@ required:
   - '#address-cells'
   - '#size-cells'
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - renesas,riic-r9a07g044
-then:
-  required:
-    - resets
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,riic-r9a09g077
+    then:
+      properties:
+        interrupts:
+          maxItems: 4
+        interrupt-names:
+          maxItems: 4
+        resets: false
+    else:
+      properties:
+        interrupts:
+          minItems: 8
+        interrupt-names:
+          minItems: 8
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,riic-r9a07g043
+              - renesas,riic-r9a07g044
+              - renesas,riic-r9a07g054
+              - renesas,riic-r9a09g057
+    then:
+      required:
+        - resets
 
 unevaluatedProperties: false
 
@@ -87,21 +142,21 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     i2c0: i2c@fcfee000 {
-            compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
-            reg = <0xfcfee000 0x44>;
-            interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
-                         <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
-                         <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
-                              "tmoi";
-            clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
-            clock-frequency = <100000>;
-            power-domains = <&cpg_clocks>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+        reg = <0xfcfee000 0x44>;
+        interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "tei", "ri", "ti", "spi", "sti", "naki", "ali",
+                          "tmoi";
+        clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+        clock-frequency = <100000>;
+        power-domains = <&cpg_clocks>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
index 04e4ffd80bc0..ec5222a1224f 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
@@ -134,16 +134,16 @@ examples:
     #include <dt-bindings/power/r8a7790-sysc.h>
 
     iic0: i2c@e6500000 {
-            compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
-                         "renesas,rmobile-iic";
-            reg = <0xe6500000 0x425>;
-            interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 318>;
-            clock-frequency = <400000>;
-            dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
-            dma-names = "tx", "rx", "tx", "rx";
-            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-            resets = <&cpg 318>;
-            #address-cells = <1>;
-            #size-cells = <0>;
+        compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic",
+                     "renesas,rmobile-iic";
+        reg = <0xe6500000 0x425>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 318>;
+        clock-frequency = <400000>;
+        dmas = <&dmac0 0x61>, <&dmac0 0x62>, <&dmac1 0x61>, <&dmac1 0x62>;
+        dma-names = "tx", "rx", "tx", "rx";
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 318>;
+        #address-cells = <1>;
+        #size-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
new file mode 100644
index 000000000000..5d1e7885b64a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rzv2m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M I2C Bus Interface
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a09g011-i2c  # RZ/V2M
+      - const: renesas,rzv2m-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Data transmission/reception interrupt
+      - description: Status interrupt
+
+  interrupt-names:
+    items:
+      - const: tia
+      - const: tis
+
+  clock-frequency:
+    default: 100000
+    enum: [ 100000, 400000 ]
+    description:
+      Desired I2C bus clock frequency in Hz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c0: i2c@a4030000 {
+        compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
+        reg = <0xa4030000 0x80>;
+        interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "tia", "tis";
+        clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>;
+        resets = <&cpg R9A09G011_IIC_GPA_PRESETN>;
+        power-domains = <&cpg>;
+        clock-frequency = <100000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
new file mode 100644
index 000000000000..a2ddc6803617
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/samsung,s3c2410-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC I2C Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,s3c2440-i2c
+            # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
+          - samsung,s3c2440-hdmiphy-i2c
+            # For s3c2440-like I2C used as a host to SATA PHY controller on an
+            # internal bus:
+          - samsung,exynos5-sata-phy-i2c
+      - items:
+          - enum:
+              - samsung,exynos7870-i2c
+              - samsung,exynos7885-i2c
+              - samsung,exynos850-i2c
+          - const: samsung,s3c2440-i2c
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: i2c
+
+  gpios:
+    description: |
+      The order of the GPIOs should be the following:: <SDA, SCL>.  The GPIO
+      specifier depends on the gpio controller. Required in all cases except
+      for "samsung,s3c2440-hdmiphy-i2c" whose input/output lines are
+      permanently wired to the respective client.
+      This property is deprecated. Use "pinctrl-0" and "pinctrl-names" instead.
+    deprecated: true
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,i2c-max-bus-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Desired frequency in Hz of the bus.
+    default: 100000
+
+  samsung,i2c-sda-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay (in ns) applied to data line (SDA) edges.
+    default: 0
+
+  samsung,i2c-slave-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Slave address in multi-master environment.
+    default: 0
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Pandle to syscon used to control the system registers.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2440-hdmiphy-i2c
+              - samsung,exynos5-sata-phy-i2c
+    then:
+      properties:
+        gpios: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2440-i2c
+              - samsung,s3c2440-hdmiphy-i2c
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@12c60000 {
+        compatible = "samsung,s3c2440-i2c";
+        reg = <0x12C60000 0x100>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_I2C0>;
+        clock-names = "i2c";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c0_bus>;
+
+        samsung,sysreg-phandle = <&sysreg_system_controller>;
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <20000>;
+        samsung,i2c-slave-addr = <0x66>;
+
+        eeprom@50 {
+            compatible = "samsung,s524ad0xd1", "atmel,24c128";
+            reg = <0x50>;
+        };
+    };
+
+    i2c@12ce0000 {
+        compatible = "samsung,s3c2440-hdmiphy-i2c";
+        reg = <0x12CE0000 0x1000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_I2C_HDMI>;
+        clock-names = "i2c";
+
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <66000>;
+
+        phy-i2c@38 {
+            compatible = "samsung,exynos4212-hdmiphy";
+            reg = <0x38>;
+        };
+    };
+
+    i2c@121d0000 {
+        compatible = "samsung,exynos5-sata-phy-i2c";
+        reg = <0x121D0000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_SATA_PHYI2C>;
+        clock-names = "i2c";
+
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <40000>;
+
+        phy-i2c@38 {
+            compatible = "samsung,exynos-sataphy-i2c";
+            reg = <0x38>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
index d9293c57f573..d904191bb0c6 100644
--- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml
@@ -27,12 +27,19 @@ properties:
     oneOf:
       - description: Generic Synopsys DesignWare I2C controller
         const: snps,designware-i2c
-      - description: Microsemi Ocelot SoCs I2C controller
+      - description: Renesas RZ/N1D I2C controller
         items:
-          - const: mscc,ocelot-i2c
+          - const: renesas,r9a06g032-i2c  # RZ/N1D
+          - const: renesas,rzn1-i2c       # RZ/N1
           - const: snps,designware-i2c
       - description: Baikal-T1 SoC System I2C controller
         const: baikal,bt1-sys-i2c
+      - items:
+          - enum:
+              - mscc,ocelot-i2c
+              - sophgo,sg2044-i2c
+              - thead,th1520-i2c
+          - const: snps,designware-i2c
 
   reg:
     minItems: 1
@@ -93,6 +100,22 @@ properties:
       - const: tx
       - const: rx
 
+  snps,bus-capacitance-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      This property indicates the bus capacitance in picofarads (pF).
+      This value is used to compute the tHIGH and tLOW periods for high speed
+      mode.
+    enum: [100, 400]
+    default: 100
+
+  snps,clk-freq-optimized:
+    description:
+      This property indicates whether the hardware reduce its clock frequency
+      by reducing the internal latency required to generate the high period and
+      low period of SCL line.
+    type: boolean
+
 unevaluatedProperties: false
 
 required:
@@ -117,6 +140,8 @@ examples:
       i2c-sda-hold-time-ns = <300>;
       i2c-sda-falling-time-ns = <300>;
       i2c-scl-falling-time-ns = <300>;
+      snps,bus-capacitance-pf = <400>;
+      snps,clk-freq-optimized;
     };
   - |
     i2c@2000 {
diff --git a/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml
new file mode 100644
index 000000000000..f9d6e2038bb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,synquacer-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext SynQuacer I2C Controller
+
+maintainers:
+  - Ard Biesheuvel <ardb@kernel.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,synquacer-i2c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk
+
+  clock-frequency:
+    minimum: 100000
+    maximum: 400000
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@51210000 {
+        compatible = "socionext,synquacer-i2c";
+        reg = <0x51210000 0x1000>;
+        interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-names = "pclk";
+        clocks = <&clk_i2c>;
+        clock-frequency = <400000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
index c76131902b77..4bbe9e775da1 100644
--- a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
@@ -29,6 +29,9 @@ properties:
     minimum: 100000
     maximum: 400000
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
index ddde08636ab0..5abf496edb59 100644
--- a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
@@ -29,6 +29,9 @@ properties:
     minimum: 100000
     maximum: 400000
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
new file mode 100644
index 000000000000..b7220fff2235
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/spacemit,k1-i2c.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/spacemit,k1-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in SpacemiT's K1 SoC
+
+maintainers:
+  - Troy Mitchell <troymitchell988@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: spacemit,k1-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: I2C Functional Clock
+      - description: APB Bus Clock
+
+  clock-names:
+    items:
+      - const: func
+      - const: bus
+
+  clock-frequency:
+    description: |
+      K1 support three different modes which running different frequencies
+      standard speed mode: up to 100000 (100Hz)
+      fast speed mode    : up to 400000 (400Hz)
+      high speed mode    : up to 3300000 (3.3Mhz)
+    default: 400000
+    maximum: 3300000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@d4010800 {
+        compatible = "spacemit,k1-i2c";
+        reg = <0xd4010800 0x38>;
+        interrupt-parent = <&plic>;
+        interrupts = <36>;
+        clocks = <&ccu 32>, <&ccu 84>;
+        clock-names = "func", "bus";
+        clock-frequency = <100000>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/sprd,sc9860-i2c.yaml b/Documentation/devicetree/bindings/i2c/sprd,sc9860-i2c.yaml
new file mode 100644
index 000000000000..ec0d39e73d26
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/sprd,sc9860-i2c.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/sprd,sc9860-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC9860 I2C controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: sprd,sc9860-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: I2C clock
+      - description: I2C source (parent) clock
+      - description: I2C module enable clock
+
+  clock-names:
+    items:
+      - const: i2c
+      - const: source
+      - const: enable
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c@70500000 {
+      compatible = "sprd,sc9860-i2c";
+      reg = <0x70500000 0x1000>;
+      interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
+      clock-names = "i2c", "source", "enable";
+      clock-frequency = <400000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
new file mode 100644
index 000000000000..012402debfeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,nomadik-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST Microelectronics Nomadik I2C
+
+description: The Nomadik I2C host controller began its life in the ST
+  Microelectronics STn8800 SoC, and was then inherited into STn8810 and
+  STn8815. It was part of the prototype STn8500 which then became ST-Ericsson
+  DB8500 after the merge of these two companies wireless divisions.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,nomadik-i2c
+          - mobileye,eyeq5-i2c
+          - mobileye,eyeq6h-i2c
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - st,nomadik-i2c
+              - mobileye,eyeq5-i2c
+              - mobileye,eyeq6h-i2c
+          - const: arm,primecell
+      - items:
+          - const: stericsson,db8500-i2c
+          - const: st,nomadik-i2c
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      # Clock name in STn8815
+      - items:
+          - const: mclk
+          - const: apb_pclk
+      # Clock name in DB8500 or EyeQ
+      - items:
+          - const: i2cclk
+          - const: apb_pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 3400000
+
+  mobileye,olb:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to OLB system controller node.
+          - description: Platform-wide controller ID (integer starting from zero).
+    description:
+      The phandle pointing to OLB system controller node, with the I2C
+      controller index.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mobileye,eyeq5-i2c
+    then:
+      required:
+        - mobileye,olb
+    else:
+      properties:
+        mobileye,olb: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h>
+    #include <dt-bindings/arm/ux500_pm_domains.h>
+    i2c@80004000 {
+      compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+      reg = <0x80004000 0x1000>;
+      interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-frequency = <400000>;
+      clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+      clock-names = "i2cclk", "apb_pclk";
+      power-domains = <&pm_domains DOMAIN_VAPE>;
+      resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>;
+    };
+
+    i2c@101f8000 {
+      compatible = "st,nomadik-i2c", "arm,primecell";
+      reg = <0x101f8000 0x1000>;
+      interrupt-parent = <&vica>;
+      interrupts = <20>;
+      clock-frequency = <100000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&i2c0clk>, <&pclki2c0>;
+      clock-names = "mclk", "apb_pclk";
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    i2c@300000 {
+      compatible = "mobileye,eyeq5-i2c", "arm,primecell";
+      reg = <0x300000 0x1000>;
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SHARED 1 IRQ_TYPE_LEVEL_HIGH>;
+      clock-frequency = <400000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&i2c_ser_clk>, <&i2c_clk>;
+      clock-names = "i2cclk", "apb_pclk";
+      mobileye,olb = <&olb 0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml
new file mode 100644
index 000000000000..08f9c1e446fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,sti-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in STMicroelectronics STi platform
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,comms-ssc-i2c
+      - st,comms-ssc4-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+    default: 100000
+
+  st,i2c-min-scl-pulse-width-us:
+    description:
+      The minimum valid SCL pulse width that is allowed through the
+      deglitch circuit. In units of us.
+
+  st,i2c-min-sda-pulse-width-us:
+    description:
+      The minimum valid SDA pulse width that is allowed through the
+      deglitch circuit. In units of us.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stih407-clks.h>
+    i2c@fed40000 {
+        compatible = "st,comms-ssc4-i2c";
+        reg = <0xfed40000 0x110>;
+        interrupts =  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_s_a0_ls CLK_ICN_REG>;
+        clock-names = "ssc";
+        clock-frequency = <400000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c0_default>;
+        st,i2c-min-scl-pulse-width-us = <0>;
+        st,i2c-min-sda-pulse-width-us = <5>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index c07289a643d8..457bb0702ed9 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -17,7 +17,9 @@ allOf:
           contains:
             enum:
               - st,stm32f7-i2c
+              - st,stm32mp13-i2c
               - st,stm32mp15-i2c
+              - st,stm32mp25-i2c
     then:
       properties:
         i2c-scl-rising-time-ns:
@@ -25,16 +27,9 @@ allOf:
 
         i2c-scl-falling-time-ns:
           default: 10
-
-        st,syscfg-fmp:
-          description: Use to set Fast Mode Plus bit within SYSCFG when
-                       Fast Mode Plus speed is selected by slave.
-                       Format is phandle to syscfg / register offset within
-                       syscfg / register bitmask for FMP bit.
-          $ref: "/schemas/types.yaml#/definitions/phandle-array"
-          items:
-            minItems: 3
-            maxItems: 3
+    else:
+      properties:
+        st,syscfg-fmp: false
 
   - if:
       properties:
@@ -47,12 +42,38 @@ allOf:
         clock-frequency:
           enum: [100000, 400000]
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32f4-i2c
+              - st,stm32f7-i2c
+              - st,stm32mp13-i2c
+              - st,stm32mp15-i2c
+    then:
+      properties:
+        interrupts:
+          minItems: 2
+
+        interrupt-names:
+          minItems: 2
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+        interrupt-names:
+          maxItems: 1
+
 properties:
   compatible:
     enum:
       - st,stm32f4-i2c
       - st,stm32f7-i2c
+      - st,stm32mp13-i2c
       - st,stm32mp15-i2c
+      - st,stm32mp25-i2c
 
   reg:
     maxItems: 1
@@ -61,6 +82,13 @@ properties:
     items:
       - description: interrupt ID for I2C event
       - description: interrupt ID for I2C error
+    minItems: 1
+
+  interrupt-names:
+    items:
+      - const: event
+      - const: error
+    minItems: 1
 
   resets:
     maxItems: 1
@@ -87,6 +115,22 @@ properties:
     minimum: 1
     maximum: 1000000
 
+  st,syscfg-fmp:
+    description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
+      Plus speed is selected by slave.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscfg
+          - description: register offset within syscfg
+          - description: register bitmask for FMP bit
+
+  wakeup-source: true
+
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
@@ -101,44 +145,49 @@ examples:
     #include <dt-bindings/mfd/stm32f7-rcc.h>
     #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 1 (with st,stm32f4-i2c compatible)
-      i2c@40005400 {
-          compatible = "st,stm32f4-i2c";
-          #address-cells = <1>;
-          #size-cells = <0>;
-          reg = <0x40005400 0x400>;
-          interrupts = <31>,
-                       <32>;
-          resets = <&rcc 277>;
-          clocks = <&rcc 0 149>;
-      };
+    i2c@40005400 {
+        compatible = "st,stm32f4-i2c";
+        reg = <0x40005400 0x400>;
+        interrupts = <31>,
+                     <32>;
+        resets = <&rcc 277>;
+        clocks = <&rcc 0 149>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
 
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 2 (with st,stm32f7-i2c compatible)
-      i2c@40005800 {
-          compatible = "st,stm32f7-i2c";
-          #address-cells = <1>;
-          #size-cells = <0>;
-          reg = <0x40005800 0x400>;
-          interrupts = <31>,
-                       <32>;
-          resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
-          clocks = <&rcc 1 CLK_I2C1>;
-      };
+    i2c@40005800 {
+        compatible = "st,stm32f7-i2c";
+        reg = <0x40005800 0x400>;
+        interrupts = <31>,
+                     <32>;
+        resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
+        clocks = <&rcc 1 CLK_I2C1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
 
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 3 (with st,stm32mp15-i2c compatible on stm32mp)
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
-      i2c@40013000 {
-          compatible = "st,stm32mp15-i2c";
-          #address-cells = <1>;
-          #size-cells = <0>;
-          reg = <0x40013000 0x400>;
-          interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-                       <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-          clocks = <&rcc I2C2_K>;
-          resets = <&rcc I2C2_R>;
-          i2c-scl-rising-time-ns = <185>;
-          i2c-scl-falling-time-ns = <20>;
-          st,syscfg-fmp = <&syscfg 0x4 0x2>;
-      };
-...
+    i2c@40013000 {
+        compatible = "st,stm32mp15-i2c";
+        reg = <0x40013000 0x400>;
+        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc I2C2_K>;
+        resets = <&rcc I2C2_R>;
+        i2c-scl-rising-time-ns = <185>;
+        i2c-scl-falling-time-ns = <20>;
+        st,syscfg-fmp = <&syscfg 0x4 0x2>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
index db0843be91c5..58d32ceeacfc 100644
--- a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/ti,omap4-i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for I2C controllers on TI's OMAP and K3 SoCs
+title: I2C controllers on TI's OMAP and K3 SoCs
 
 maintainers:
   - Vignesh Raghavendra <vigneshr@ti.com>
@@ -37,16 +37,8 @@ properties:
   clock-names:
     const: fck
 
-  clock-frequency: true
-
   power-domains: true
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
   ti,hwmods:
     description:
       Must be "i2c<n>", n being the instance number (1-based).
@@ -55,38 +47,39 @@ properties:
     $ref: /schemas/types.yaml#/definitions/string
     deprecated: true
 
-# subnode's properties
-patternProperties:
-  "@[0-9a-f]+$":
-    type: object
+  mux-states:
     description:
-      Flash device uses the below defined properties in the subnode.
+      mux controller node to route the I2C signals from SoC to clients.
+    maxItems: 1
 
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - ti,omap2420-i2c
+            - ti,omap2430-i2c
+            - ti,omap3-i2c
+            - ti,omap4-i2c
 
-if:
-  properties:
-    compatible:
-      enum:
-        - ti,omap2420-i2c
-        - ti,omap2430-i2c
-        - ti,omap3-i2c
-        - ti,omap4-i2c
+    then:
+      properties:
+        ti,hwmods:
+          items:
+            - pattern: "^i2c([1-9])$"
 
-then:
-  properties:
-    ti,hwmods:
-      items:
-        - pattern: "^i2c([1-9])$"
+    else:
+      properties:
+        ti,hwmods: false
 
-else:
-  properties:
-    ti,hwmods: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -94,9 +87,10 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     main_i2c0: i2c@2000000 {
-            compatible = "ti,j721e-i2c", "ti,omap4-i2c";
-            reg = <0x2000000 0x100>;
-            interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
-            #address-cells = <1>;
-            #size-cells = <0>;
-         };
+        compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+        reg = <0x2000000 0x100>;
+        interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        mux-states = <&i2c_mux 1>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml
new file mode 100644
index 000000000000..19cfffb39296
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/tsd,mule-i2c-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Theobroma Systems Mule I2C multiplexer
+
+maintainers:
+  - Farouk Bouabid <farouk.bouabid@cherry.de>
+  - Quentin Schulz <quentin.schulz@cherry.de>
+
+description: |
+  Theobroma Systems Mule is an MCU that emulates a set of I2C devices, among
+  which devices that are reachable through an I2C-mux. The devices on the mux
+  can be selected by writing the appropriate device number to an I2C config
+  register.
+
+      +--------------------------------------------------+
+      | Mule                                             |
+  0x18|    +---------------+                             |
+  -------->|Config register|----+                        |
+      |    +---------------+    |                        |
+      |                         V_                       |
+      |                        |  \          +--------+  |
+      |                        |   \-------->| dev #0 |  |
+      |                        |   |         +--------+  |
+  0x6f|                        | M |-------->| dev #1 |  |
+  ---------------------------->| U |         +--------+  |
+      |                        | X |-------->| dev #2 |  |
+      |                        |   |         +--------+  |
+      |                        |   /-------->| dev #3 |  |
+      |                        |__/          +--------+  |
+      +--------------------------------------------------+
+
+allOf:
+  - $ref: /schemas/i2c/i2c-mux.yaml#
+
+properties:
+  compatible:
+    const: tsd,mule-i2c-mux
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c-mux {
+        compatible = "tsd,mule-i2c-mux";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            rtc@6f {
+                compatible = "isil,isl1208";
+                reg = <0x6f>;
+            };
+        };
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/i2c/wm,wm8505-i2c.yaml b/Documentation/devicetree/bindings/i2c/wm,wm8505-i2c.yaml
new file mode 100644
index 000000000000..e498ce47b885
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/wm,wm8505-i2c.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/wm,wm8505-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C Controller on WonderMedia WM8505 and related SoCs
+
+maintainers:
+  - Alexey Charkov <alchark@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: wm,wm8505-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [100000, 400000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c_0: i2c@d8280000 {
+        compatible = "wm,wm8505-i2c";
+        reg = <0xd8280000 0x1000>;
+        interrupts = <19>;
+        clocks = <&clki2c0>;
+        clock-frequency = <400000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
index 715dcfa5a922..658ae92fa86d 100644
--- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx IIC controller Device Tree Bindings
+title: Xilinx IIC controller
 
 maintainers:
   - info@mocean-labs.com
@@ -14,7 +14,9 @@ allOf:
 
 properties:
   compatible:
-    const: xlnx,xps-iic-2.00.a
+    enum:
+      - xlnx,axi-iic-2.1
+      - xlnx,xps-iic-2.00.a
 
   reg:
     maxItems: 1
@@ -30,6 +32,13 @@ properties:
     description: |
       Input clock name.
 
+  clock-frequency:
+    description:
+      Optional I2C SCL clock frequency. If not specified, do not configure
+      in software, rely only on hardware design value.
+    default: 100000
+    enum: [ 100000, 400000, 1000000 ]
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i3c/adi,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/adi,i3c-master.yaml
new file mode 100644
index 000000000000..2498672d2654
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/adi,i3c-master.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/adi,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices I3C Controller
+
+description:
+  FPGA-based I3C controller designed to interface with I3C and I2C peripherals,
+  implementing a subset of the I3C-basic specification. The IP core is tested
+  on arm, microblaze, and arm64 architectures.
+
+  https://analogdevicesinc.github.io/hdl/library/i3c_controller
+
+maintainers:
+  - Jorge Marques <jorge.marques@analog.com>
+
+properties:
+  compatible:
+    const: adi,i3c-master-v1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: The AXI interconnect clock, drives the register map.
+      - description:
+          The secondary clock, drives the internal logic asynchronously to the
+          register map. The presence of this entry states that the IP Core was
+          synthesized with a second clock input, and the absence of this entry
+          indicates a topology where a single clock input drives all the
+          internal logic.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: axi
+      - const: i3c
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: i3c.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i3c@44a00000 {
+        compatible = "adi,i3c-master-v1";
+        reg = <0x44a00000 0x1000>;
+        interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 15>, <&clkc 15>;
+        clock-names = "axi", "i3c";
+        #address-cells = <3>;
+        #size-cells = <0>;
+
+        /* I3C and I2C devices */
+    };
diff --git a/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
new file mode 100644
index 000000000000..47be5d9a32d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/aspeed,ast2600-i3c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2600 i3c controller
+
+maintainers:
+  - Jeremy Kerr <jk@codeconstruct.com.au>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: aspeed,ast2600-i3c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  sda-pullup-ohms:
+    enum: [545, 750, 2000]
+    default: 2000
+    description: |
+      Value to configure SDA pullup resistor, in Ohms.
+
+  aspeed,global-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to i3c global register syscon node
+          - description: index of this i3c controller in the global register set
+    description: |
+      A (phandle, controller index) reference to the i3c global register set
+      used for this device.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - aspeed,global-regs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i3c@2000 {
+        compatible = "aspeed,ast2600-i3c";
+        reg = <0x2000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        clocks = <&syscon 0>;
+        resets = <&syscon 0>;
+        aspeed,global-regs = <&i3c_global 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i3c1_default>;
+        interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
deleted file mode 100644
index 3716589d6999..000000000000
--- a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Bindings for cadence I3C master block
-=====================================
-
-Required properties:
---------------------
-- compatible: shall be "cdns,i3c-master"
-- clocks: shall reference the pclk and sysclk
-- clock-names: shall contain "pclk" and "sysclk"
-- interrupts: the interrupt line connected to this I3C master
-- reg: I3C master registers
-
-Mandatory properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- #address-cells: shall be set to 1
-- #size-cells: shall be set to 0
-
-Optional properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- i2c-scl-hz
-- i3c-scl-hz
-
-I3C device connected on the bus follow the generic description (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details).
-
-Example:
-
-	i3c-master@0d040000 {
-		compatible = "cdns,i3c-master";
-		clocks = <&coreclock>, <&i3csysclock>;
-		clock-names = "pclk", "sysclk";
-		interrupts = <3 0>;
-		reg = <0x0d040000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-scl-hz = <100000>;
-
-		nunchuk: nunchuk@52 {
-			compatible = "nintendo,nunchuk";
-			reg = <0x52 0x0 0x10>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
new file mode 100644
index 000000000000..6fa3078074d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/cdns,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence I3C master block
+
+maintainers:
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: cdns,i3c-master
+      - items:
+          - enum:
+              - axiado,ax3000-i3c
+          - const: cdns,i3c-master
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: sysclk
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c@d040000 {
+        compatible = "cdns,i3c-master";
+        clocks = <&coreclock>, <&i3csysclock>;
+        clock-names = "pclk", "sysclk";
+        interrupts = <3 0>;
+        reg = <0x0d040000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        i2c-scl-hz = <100000>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml
index 1f82fc923799..e25fa72fd785 100644
--- a/Documentation/devicetree/bindings/i3c/i3c.yaml
+++ b/Documentation/devicetree/bindings/i3c/i3c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i3c/i3c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: I3C bus binding
+title: I3C bus
 
 maintainers:
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
@@ -17,7 +17,7 @@ description: |
 
 properties:
   $nodename:
-    pattern: "^i3c-master@[0-9a-f]+$"
+    pattern: "^i3c@[0-9a-f]+$"
 
   "#address-cells":
     const: 3
@@ -55,6 +55,12 @@ properties:
 
       May not be supported by all controllers.
 
+  mctp-controller:
+    type: boolean
+    description: |
+      Indicates that the system is accessible via this bus as an endpoint for
+      MCTP over I3C transport.
+
 required:
   - "#address-cells"
   - "#size-cells"
@@ -65,7 +71,7 @@ patternProperties:
     description: |
       I2C child, should be named: <device-type>@<i2c-address>
 
-      All properties described in Documentation/devicetree/bindings/i2c/i2c.txt
+      All properties described in dtschema schemas/i2c/i2c-controller.yaml
       are valid here, except the reg property whose content is changed.
 
     properties:
@@ -85,6 +91,7 @@ patternProperties:
               - const: 0
               - description: |
                   Shall encode the I3C LVR (Legacy Virtual Register):
+                  See include/dt-bindings/i3c/i3c.h
                     bit[31:8]: unused/ignored
                     bit[7:5]: I2C device index. Possible values:
                       * 0: I2C device has a 50 ns spike filter
@@ -119,12 +126,12 @@ patternProperties:
                 minimum: 0
                 maximum: 0x7f
               - description: |
-                  First half of the Provisional ID (following the PID
+                  First half of the Provisioned ID (following the PID
                   definition provided by the I3C specification).
 
                   Contains the manufacturer ID left-shifted by 1.
               - description: |
-                  Second half of the Provisional ID (following the PID
+                  Second half of the Provisioned ID (following the PID
                   definition provided by the I3C specification).
 
                   Contains the ORing of the part ID left-shifted by 16,
@@ -135,9 +142,10 @@ patternProperties:
         minimum: 0x1
         maximum: 0xff
         description: |
-          Dynamic address to be assigned to this device. This property is only
-          valid if the I3C device has a static address (first cell of the reg
-          property != 0).
+          Dynamic address to be assigned to this device. In case static address is
+          present (first cell of the reg property != 0), this address is assigned
+          through SETDASA. If static address is not present, this address is assigned
+          through SETNEWDA after assigning a temporary address via ENTDAA.
 
     required:
       - reg
@@ -146,7 +154,9 @@ additionalProperties: true
 
 examples:
   - |
-    i3c-master@d040000 {
+    #include <dt-bindings/i3c/i3c.h>
+
+    i3c@d040000 {
         compatible = "cdns,i3c-master";
         clocks = <&coreclock>, <&i3csysclock>;
         clock-names = "pclk", "sysclk";
@@ -159,16 +169,22 @@ examples:
         /* I2C device. */
         eeprom@57 {
             compatible = "atmel,24c01";
-            reg = <0x57 0x0 0x10>;
+            reg = <0x57 0x0 (I2C_FM | I2C_FILTER)>;
             pagesize = <0x8>;
         };
 
-        /* I3C device with a static I2C address. */
+        /* I3C device with a static I2C address and assigned address. */
         thermal_sensor: sensor@68,39200144004 {
             reg = <0x68 0x392 0x144004>;
             assigned-address = <0xa>;
         };
 
+        /* I3C device with only assigned address. */
+        pressure_sensor: sensor@0,39200124004 {
+            reg = <0x0 0x392 0x124000>;
+            assigned-address = <0xc>;
+        };
+
         /*
          * I3C device without a static I2C address but requiring
          * resources described in the DT.
diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
index 04da001fc6ec..39bb1a1784c9 100644
--- a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
+++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MIPI I3C HCI Device Tree Bindings
+title: MIPI I3C HCI
 
 maintainers:
   - Nicolas Pitre <npitre@baylibre.com>
@@ -43,7 +43,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    i3c-master@a0000000 {
+    i3c@a0000000 {
       compatible = "mipi-i3c-hci";
       reg = <0xa0000000 0x2000>;
       interrupts = <89>;
diff --git a/Documentation/devicetree/bindings/i3c/renesas,i3c.yaml b/Documentation/devicetree/bindings/i3c/renesas,i3c.yaml
new file mode 100644
index 000000000000..a20d875086d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/renesas,i3c.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/renesas,i3c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas I3C Bus Interface
+
+maintainers:
+  - Wolfram Sang <wsa+renesas@sang-engineering.com>
+  - Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a08g045-i3c # RZ/G3S
+              - renesas,r9a09g047-i3c # RZ/G3E
+      - items:
+          - enum:
+              - renesas,r9a09g056-i3c # RZ/V2N
+              - renesas,r9a09g057-i3c # RZ/V2H(P)
+          - const: renesas,r9a09g047-i3c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Non-recoverable internal error interrupt
+      - description: Normal transfer error interrupt
+      - description: Normal transfer abort interrupt
+      - description: Normal response status buffer full interrupt
+      - description: Normal command buffer empty interrupt
+      - description: Normal IBI status buffer full interrupt
+      - description: Normal Rx data buffer full interrupt
+      - description: Normal Tx data buffer empty interrupt
+      - description: Normal receive status buffer full interrupt
+      - description: START condition detection interrupt
+      - description: STOP condition detection interrupt
+      - description: Transmit end interrupt
+      - description: NACK detection interrupt
+      - description: Arbitration lost interrupt
+      - description: Timeout detection interrupt
+      - description: Wake-up condition detection interrupt
+      - description: HDR Exit Pattern detection interrupt
+    minItems: 16
+
+  interrupt-names:
+    items:
+      - const: ierr
+      - const: terr
+      - const: abort
+      - const: resp
+      - const: cmd
+      - const: ibi
+      - const: rx
+      - const: tx
+      - const: rcv
+      - const: st
+      - const: sp
+      - const: tend
+      - const: nack
+      - const: al
+      - const: tmo
+      - const: wu
+      - const: exit
+    minItems: 16
+
+  clocks:
+    items:
+      - description: APB bus clock
+      - description: transfer clock
+      - description: SFRs clock
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: tclk
+      - const: pclkrw
+    minItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: Reset signal
+      - description: APB interface reset signal/SCAN reset signal
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: tresetn
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clock-names
+  - clocks
+  - power-domains
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: i3c.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a08g045-i3c
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+        interrupts:
+          minItems: 17
+        interrupt-names:
+          minItems: 17
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g047-i3c
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          minItems: 3
+        interrupts:
+          maxItems: 16
+        interrupt-names:
+          maxItems: 16
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a08g045-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i3c@1005b000 {
+        compatible = "renesas,r9a08g045-i3c";
+        reg = <0x1005b000 0x1000>;
+        clocks = <&cpg CPG_MOD R9A08G045_I3C_PCLK>,
+                 <&cpg CPG_MOD R9A08G045_I3C_TCLK>;
+        clock-names = "pclk", "tclk";
+        interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 294 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "ierr", "terr", "abort", "resp",
+                          "cmd", "ibi", "rx", "tx", "rcv",
+                          "st", "sp", "tend", "nack",
+                          "al", "tmo", "wu", "exit";
+        resets = <&cpg R9A08G045_I3C_PRESETN>,
+                 <&cpg R9A08G045_I3C_TRESETN>;
+        reset-names = "presetn", "tresetn";
+        power-domains = <&cpg>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
index 62f3ca66274f..853092f7522d 100644
--- a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
+++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml
@@ -9,12 +9,17 @@ title: Silvaco I3C master
 maintainers:
   - Conor Culhane <conor.culhane@silvaco.com>
 
-allOf:
-  - $ref: "i3c.yaml#"
-
 properties:
   compatible:
-    const: silvaco,i3c-master-v1
+    oneOf:
+      - enum:
+          - nuvoton,npcm845-i3c
+          - silvaco,i3c-master-v1
+      - items:
+          - enum:
+              - nxp,imx94-i3c
+              - nxp,imx95-i3c
+          - const: silvaco,i3c-master-v1
 
   reg:
     maxItems: 1
@@ -23,12 +28,14 @@ properties:
     maxItems: 1
 
   clocks:
+    minItems: 2
     items:
       - description: system clock
       - description: bus clock
       - description: other (slower) events clock
 
   clock-names:
+    minItems: 2
     items:
       - const: pclk
       - const: fast_clk
@@ -44,11 +51,39 @@ required:
   - clock-names
   - clocks
 
-additionalProperties: true
+allOf:
+  - $ref: i3c.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nuvoton,npcm845-i3c
+            - silvaco,i3c-master-v1
+    then:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          minItems: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,imx94-i3c
+              - nxp,imx95-i3c
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+
+unevaluatedProperties: false
 
 examples:
   - |
-    i3c-master@a0000000 {
+    i3c@a0000000 {
         compatible = "silvaco,i3c-master-v1";
         clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>;
         clock-names = "pclk", "fast_clk", "slow_clk";
diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
deleted file mode 100644
index 07f35f36085d..000000000000
--- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Bindings for Synopsys DesignWare I3C master block
-=================================================
-
-Required properties:
---------------------
-- compatible: shall be "snps,dw-i3c-master-1.00a"
-- clocks: shall reference the core_clk
-- interrupts: the interrupt line connected to this I3C master
-- reg: Offset and length of I3C master registers
-
-Mandatory properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- #address-cells: shall be set to 3
-- #size-cells: shall be set to 0
-
-Optional properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- i2c-scl-hz
-- i3c-scl-hz
-
-I3C device connected on the bus follow the generic description (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details).
-
-Example:
-
-	i3c-master@2000 {
-		compatible = "snps,dw-i3c-master-1.00a";
-		#address-cells = <3>;
-		#size-cells = <0>;
-		reg = <0x02000 0x1000>;
-		interrupts = <0>;
-		clocks = <&i3cclk>;
-
-		eeprom@57{
-			compatible = "atmel,24c01";
-			reg = <0x57 0x0 0x10>;
-			pagesize = <0x8>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
new file mode 100644
index 000000000000..e803457d3f55
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/snps,dw-i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare I3C master block
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: snps,dw-i3c-master-1.00a
+      - items:
+          - const: altr,agilex5-dw-i3c-master
+          - const: snps,dw-i3c-master-1.00a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Core clock
+      - description: APB clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: apb
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c@2000 {
+        compatible = "snps,dw-i3c-master-1.00a";
+        #address-cells = <3>;
+        #size-cells = <0>;
+        reg = <0x02000 0x1000>;
+        interrupts = <0>;
+        clocks = <&i3cclk>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
index 6f8f8a6258fe..b6ba7ad1a8d5 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@@ -27,20 +27,21 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index 4fcbfd93e218..a92e153705f3 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ADIS16240 Programmable Impact Sensor and Recorder driver
 
 maintainers:
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 description: |
   ADIS16240 Programmable Impact Sensor and Recorder driver that supports
@@ -25,20 +26,20 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
index d6afc1b8c272..3a8c69eecfde 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@@ -4,28 +4,30 @@
 $id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices ADXL313 3-Axis Digital Accelerometer
+title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers
 
 maintainers:
   - Lucas Stankus <lucas.p.stankus@gmail.com>
 
 description: |
-  Analog Devices ADXL313 3-Axis Digital Accelerometer that supports
-  both I2C & SPI interfaces.
+  Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that
+  support both I2C & SPI interfaces.
+    https://www.analog.com/en/products/adxl312.html
     https://www.analog.com/en/products/adxl313.html
+    https://www.analog.com/en/products/adxl314.html
 
 properties:
   compatible:
     enum:
+      - adi,adxl312
       - adi,adxl313
+      - adi,adxl314
 
   reg:
     maxItems: 1
 
   spi-3wire: true
 
-  spi-max-frequency: true
-
   vs-supply:
     description: Regulator that supplies power to the accelerometer
 
@@ -48,13 +50,15 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -68,7 +72,6 @@ examples:
         };
     };
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     spi {
         #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 11d32a288535..61d7ba89adc2 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -32,38 +32,49 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
+  spi-3wire: true
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [INT1, INT2]
+      - const: INT2
+
+dependencies:
+  interrupts: [ interrupt-names ]
 
 required:
   - compatible
   - reg
-  - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         /* Example for a I2C device node */
         accelerometer@2a {
             compatible = "adi,adxl345";
-            reg = <0x53>;
+            reg = <0x2a>;
             interrupt-parent = <&gpio0>;
             interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
         };
     };
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -75,6 +86,8 @@ examples:
             spi-cpol;
             spi-cpha;
             interrupt-parent = <&gpio0>;
-            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+                         <1 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1", "INT2";
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
index ba54d6998f2e..f39e2912731f 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -4,20 +4,22 @@
 $id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer
+title: Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers
 
 maintainers:
   - Puranjay Mohan <puranjay12@gmail.com>
 
 description: |
-  Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports
-  both I2C & SPI interfaces
+  Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers that
+  support both I2C & SPI interfaces
     https://www.analog.com/en/products/adxl355.html
+    https://www.analog.com/en/products/adxl359.html
 
 properties:
   compatible:
     enum:
       - adi,adxl355
+      - adi,adxl359
 
   reg:
     maxItems: 1
@@ -45,44 +47,43 @@ properties:
   vddio-supply:
     description: Regulator that provides power to the bus
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/gpio/gpio.h>
-        #include <dt-bindings/interrupt-controller/irq.h>
-        i2c {
-                #address-cells = <1>;
-                #size-cells = <0>;
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-                /* Example for a I2C device node */
-                accelerometer@1d {
-                        compatible = "adi,adxl355";
-                        reg = <0x1d>;
-                        interrupt-parent = <&gpio>;
-                        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-                        interrupt-names = "DRDY";
-                };
+        /* Example for a I2C device node */
+        accelerometer@1d {
+            compatible = "adi,adxl355";
+            reg = <0x1d>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "DRDY";
         };
+    };
   - |
-        #include <dt-bindings/gpio/gpio.h>
-        #include <dt-bindings/interrupt-controller/irq.h>
-        spi {
-                #address-cells = <1>;
-                #size-cells = <0>;
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-                accelerometer@0 {
-                        compatible = "adi,adxl355";
-                        reg = <0>;
-                        spi-max-frequency = <1000000>;
-                        interrupt-parent = <&gpio>;
-                        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-                        interrupt-names = "DRDY";
-                };
+        accelerometer@0 {
+            compatible = "adi,adxl355";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "DRDY";
         };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
new file mode 100644
index 000000000000..f10d98d34cb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL367 3-Axis Digital Accelerometer
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
+
+  The ADXL367 does not alias input signals by to achieve ultralow power
+  consumption, it samples the full bandwidth of the sensor at all
+  data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
+  with a resolution of 0.25mg/LSB on the +-2 g range.
+
+  In addition to its ultralow power consumption, the ADXL367
+  has many features to enable true system level power reduction.
+  It includes a deep multimode output FIFO, a built-in micropower
+  temperature sensor, and an internal ADC for synchronous conversion
+  of an additional analog input.
+    https://www.analog.com/en/products/adxl367.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl367
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@53 {
+        compatible = "adi,adxl367";
+        reg = <0x53>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@0 {
+        compatible = "adi,adxl367";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index 38b59b6454ce..0ba0df46c3a9 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
 
 maintainers:
-  - Stefan Popa <stefan.popa@analog.com>
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 description: |
   Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
@@ -25,43 +26,42 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/gpio/gpio.h>
-        #include <dt-bindings/interrupt-controller/irq.h>
-        i2c0 {
-                #address-cells = <1>;
-                #size-cells = <0>;
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-                /* Example for a I2C device node */
-                accelerometer@53 {
-                        compatible = "adi,adxl372";
-                        reg = <0x53>;
-                        interrupt-parent = <&gpio>;
-                        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-                };
+        /* Example for a I2C device node */
+        accelerometer@53 {
+            compatible = "adi,adxl372";
+            reg = <0x53>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
         };
+    };
   - |
-        #include <dt-bindings/gpio/gpio.h>
-        #include <dt-bindings/interrupt-controller/irq.h>
-        spi0 {
-                #address-cells = <1>;
-                #size-cells = <0>;
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-                accelerometer@0 {
-                        compatible = "adi,adxl372";
-                        reg = <0>;
-                        spi-max-frequency = <1000000>;
-                        interrupt-parent = <&gpio>;
-                        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-                };
+        accelerometer@0 {
+            compatible = "adi,adxl372";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
         };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml
new file mode 100644
index 000000000000..ab517720a6a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL380/382 3-Axis Digital Accelerometer
+
+maintainers:
+  - Ramona Gradinariu <ramona.gradinariu@analog.com>
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The ADXL380/ADXL382 and ADXL318/ADXL319 are low noise density,
+  low power, 3-axis accelerometers with selectable measurement ranges.
+  The ADXL380 and ADXL318 support the ±4 g, ±8 g, and ±16 g ranges,
+  while the ADXL382 and ADXL319 support ±15 g, ±30 g, and ±60 g ranges.
+
+  https://www.analog.com/en/products/adxl318.html
+  https://www.analog.com/en/products/adxl380.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl318
+      - adi,adxl319
+      - adi,adxl380
+      - adi,adxl382
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [INT0, INT1]
+      - const: INT1
+
+  vddio-supply: true
+
+  vsupply-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - vddio-supply
+  - vsupply-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@54 {
+        compatible = "adi,adxl380";
+        reg = <0x54>;
+        vddio-supply = <&vddio>;
+        vsupply-supply = <&vsupply>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "INT0";
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@0 {
+        compatible = "adi,adxl380";
+        reg = <0>;
+        spi-max-frequency = <8000000>;
+        vddio-supply = <&vddio>;
+        vsupply-supply = <&vsupply>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "INT0";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
index 942b23ad0712..8c820c27f781 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/accel/bosch,bma220.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bosch BMA220 Trixial Acceleration Sensor
+title: Bosch BMA220 Triaxial Acceleration Sensor
 
 maintainers:
   - Jonathan Cameron <Jonathan.Cameron@huawei.com>
@@ -20,7 +20,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
+  spi-cpha: true
+  spi-cpol: true
 
   vdda-supply: true
   vddd-supply: true
@@ -30,12 +31,15 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -43,8 +47,10 @@ examples:
             compatible = "bosch,bma220";
             reg = <0>;
             spi-max-frequency = <2500000>;
+            spi-cpol;
+            spi-cpha;
             interrupt-parent = <&gpio0>;
-            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupts = <0 IRQ_TYPE_EDGE_RISING>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
index 478e75ae0885..85c9537f1f02 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -72,7 +72,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -104,7 +107,6 @@ examples:
         };
     };
   - |
-    # include <dt-bindings/interrupt-controller/irq.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
index 8723a336229e..c5fedcf998f2 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
@@ -40,7 +40,6 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
       #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
index 911a1ae9c83f..3cb82576d758 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -17,13 +17,13 @@ description: |
 properties:
   compatible:
     enum:
+      - bosch,bmi085-accel
       - bosch,bmi088-accel
+      - bosch,bmi090l-accel
 
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
 
   vddio-supply: true
@@ -48,7 +48,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
index 7c8f8bdc2333..cb31e75ba680 100644
--- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale MMA7455 and MMA7456 three axis accelerometers
 
 maintainers:
-  - Joachim Eastwood <manabian@gmail.com>
   - Jonathan Cameron <jic23@kernel.org>
 
 description:
@@ -37,16 +36,17 @@ properties:
     maxItems: 2
     items:
       enum:
-        - "INT1"
-        - "INT2"
-
-  spi-max-frequency: true
+        - INT1
+        - INT2
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
new file mode 100644
index 000000000000..f07c70e51c45
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM/Kionix KX022A, KX132/134-1211 and KX132/134ACR-LBZ Accelerometers
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  KX022A, KX132ACR-LBZ and KX132-1211 are 3-axis accelerometers supporting
+  +/- 2G, 4G, 8G and 16G ranges. The KX134ACR-LBZ and KX134-1211 support
+  +/- 8G, 16G, 32G and 64G. All the sensors also have variable output
+  data-rates and a hardware-fifo buffering. These accelerometers can be
+  accessed either via I2C or SPI.
+
+properties:
+  compatible:
+    enum:
+      - kionix,kx022a
+      - kionix,kx132-1211
+      - kionix,kx134-1211
+      - rohm,kx132acr-lbz
+      - rohm,kx134acr-lbz
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [INT1, INT2]
+      - const: INT2
+
+  vdd-supply: true
+  io-vdd-supply: true
+
+  mount-matrix:
+    description: |
+      an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@1f {
+            compatible = "kionix,kx022a";
+            reg = <0x1f>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "INT1";
+
+            io-vdd-supply = <&iovdd>;
+            vdd-supply = <&vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
index 714e48e613de..951a3a2ba8fc 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
@@ -16,6 +16,7 @@ properties:
       - kionix,kxcj91008
       - kionix,kxtj21009
       - kionix,kxtf9
+      - kionix,kx022-1020
       - kionix,kx023-1025
 
   reg:
@@ -44,7 +45,7 @@ examples:
 
         accel@f {
             compatible = "kionix,kxtf9";
-            reg = <0x0F>;
+            reg = <0xf>;
             mount-matrix = "0", "1", "0",
                            "1", "0", "0",
                            "0", "0", "1";
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
index 390b87242fcb..53de921768ac 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
@@ -29,13 +29,14 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -56,7 +57,6 @@ examples:
         };
     };
   - |
-    # include <dt-bindings/interrupt-controller/irq.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt
index 764e28ec1a0a..457539647f36 100644
--- a/Documentation/devicetree/bindings/iio/accel/lis302.txt
+++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt
@@ -36,7 +36,7 @@ Optional properties for all bus drivers:
  - st,irq{1,2}-disable:		disable IRQ 1/2
  - st,irq{1,2}-ff-wu-1:		raise IRQ 1/2 on FF_WU_1 condition
  - st,irq{1,2}-ff-wu-2:		raise IRQ 1/2 on FF_WU_2 condition
- - st,irq{1,2}-data-ready:	raise IRQ 1/2 on data ready contition
+ - st,irq{1,2}-data-ready:	raise IRQ 1/2 on data ready condition
  - st,irq{1,2}-click:		raise IRQ 1/2 on click condition
  - st,irq-open-drain:		consider IRQ lines open-drain
  - st,irq-active-low:		make IRQ lines active low
diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
new file mode 100644
index 000000000000..d530ec041fe7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MEMSensing digital 3-Axis accelerometer
+
+maintainers:
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+description: |
+  MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
+  sensitivity consumer applications. It has dynamical user selectable full
+  scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
+  with output data rates from 1Hz to 1000Hz.
+  Datasheet can be found at following URL
+  https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
+
+properties:
+  compatible:
+    const: memsensing,msa311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@62 {
+            compatible = "memsensing,msa311";
+            reg = <0x62>;
+            interrupt-parent = <&gpio_intc>;
+            interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
index 55fd3548e3b6..00c990caa1e4 100644
--- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - murata,sca3300
+      - murata,scl3300
 
   reg:
     maxItems: 1
@@ -28,7 +29,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
index ad529ab2c6e2..c175f4c4cbdb 100644
--- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -14,12 +14,20 @@ description: |
   SPI and I2C interface.
     https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
     https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
+    https://www.nxp.com/docs/en/data-sheet/FXLS8967AF.pdf
+    https://www.nxp.com/docs/en/data-sheet/FXLS8974CF.pdf
 
 properties:
   compatible:
-    enum:
-      - nxp,fxls8962af
-      - nxp,fxls8964af
+    oneOf:
+      - enum:
+          - nxp,fxls8962af
+          - nxp,fxls8964af
+      - items:
+          - enum:
+              - nxp,fxls8967af
+              - nxp,fxls8974cf
+          - const: nxp,fxls8962af
 
   reg:
     maxItems: 1
@@ -27,8 +35,6 @@ properties:
   vdd-supply:
     description: phandle to the regulator that provides power to the accelerometer
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -40,16 +46,24 @@ properties:
   drive-open-drain:
     type: boolean
 
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable wake on accelerometer event
+
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -60,11 +74,12 @@ examples:
             interrupt-parent = <&gpio0>;
             interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "INT1";
+            wakeup-source;
         };
     };
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml
index db348fcbb52c..b9bc02b5b07a 100644
--- a/Documentation/devicetree/bindings/iio/adc/adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic IIO bindings for ADC channels
+title: IIO Common Properties for ADC Channels
 
 maintainers:
   - Jonathan Cameron <jic23@kernel.org>
@@ -22,7 +22,6 @@ properties:
     maxItems: 1
 
   label:
-    $ref: /schemas/types.yaml#/definitions/string
     description: Unique name to identify which channel this is.
 
   bipolar:
@@ -38,6 +37,29 @@ properties:
       to both the positive and negative inputs of a differential ADC.
       The first value specifies the positive input pin, the second
       specifies the negative input pin.
+      There are also some ADCs, where the differential channel has dedicated
+      positive and negative inputs which can be used to measure differential
+      voltage levels. For those setups, this property can be configured with
+      the 'reg' property for both inputs (i.e. diff-channels = <reg reg>).
+
+  single-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When devices combine single-ended and differential channels, allow the
+      channel for a single element to be specified, independent of reg (as for
+      differential channels). If this and diff-channels are not present reg
+      shall be used instead.
+
+  common-mode-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Some ADCs have differential input pins that can be used to measure
+      single-ended or pseudo-differential inputs. This property can be used
+      in addition to single-channel to signal software that this channel is
+      not differential but still specify two inputs.
+
+      The input pair is specified by setting single-channel to the positive
+      input pin and common-mode-channel to the negative pin.
 
   settling-time-us:
     description:
@@ -51,4 +73,15 @@ properties:
       device design and can interact with other characteristics such as
       settling time.
 
+anyOf:
+  - oneOf:
+      - required:
+          - reg
+          - diff-channels
+      - required:
+          - reg
+          - single-channel
+  - required:
+      - reg
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml
new file mode 100644
index 000000000000..96e01a97dd95
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4000.yaml
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4000 and similar Analog to Digital Converters
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+
+description: |
+  Analog Devices AD4000 family of Analog to Digital Converters with SPI support.
+  Specifications can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4000-4004-4008.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4001-4005.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4002-4006-4010.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4003-4007-4011.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4020-4021-4022.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4001.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/adaq4003.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7685.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7686.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7687.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7688.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7690.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7691.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7693.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7942.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7946.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7980.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7982.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7983.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7984.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad7988-1_7988-5.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - adi,ad4000
+          - adi,ad4001
+          - adi,ad4002
+          - adi,ad4003
+          - adi,ad4020
+          - adi,adaq4001
+          - adi,adaq4003
+          - adi,ad7687
+          - adi,ad7691
+          - adi,ad7942
+          - adi,ad7946
+          - adi,ad7983
+      - items:
+          - enum:
+              - adi,ad4004
+              - adi,ad4008
+          - const: adi,ad4000
+      - items:
+          - enum:
+              - adi,ad4005
+          - const: adi,ad4001
+      - items:
+          - enum:
+              - adi,ad4006
+              - adi,ad4010
+          - const: adi,ad4002
+      - items:
+          - enum:
+              - adi,ad4007
+              - adi,ad4011
+          - const: adi,ad4003
+      - items:
+          - enum:
+              - adi,ad4021
+              - adi,ad4022
+          - const: adi,ad4020
+      - items:
+          - enum:
+              - adi,ad7685
+              - adi,ad7686
+              - adi,ad7980
+              - adi,ad7988-1
+              - adi,ad7988-5
+          - const: adi,ad7983
+      - items:
+          - enum:
+              - adi,ad7688
+              - adi,ad7693
+          - const: adi,ad7687
+      - items:
+          - enum:
+              - adi,ad7690
+              - adi,ad7982
+              - adi,ad7984
+          - const: adi,ad7691
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 102040816 # for VIO > 2.7 V, 81300813 for VIO > 1.7 V
+
+  adi,sdi-pin:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ high, low, cs, sdi ]
+    default: sdi
+    description:
+      Describes how the ADC SDI pin is wired. A value of "sdi" indicates that
+      the ADC SDI is connected to host SDO. "high" indicates that the ADC SDI
+      pin is hard-wired to logic high (VIO). "low" indicates that it is
+      hard-wired low (GND). "cs" indicates that the ADC SDI pin is connected to
+      the host CS line.
+
+  '#daisy-chained-devices': true
+
+  vdd-supply:
+    description: A 1.8V supply that powers the chip (VDD).
+
+  vio-supply:
+    description:
+      A 1.8V to 5.5V supply for the digital inputs and outputs (VIO).
+
+  ref-supply:
+    description:
+      A 2.5 to 5V supply for the external reference voltage (REF).
+
+  cnv-gpios:
+    description:
+      When provided, this property indicates the GPIO that is connected to the
+      CNV pin.
+    maxItems: 1
+
+  adi,high-z-input:
+    type: boolean
+    description:
+      High-Z mode allows the amplifier and RC filter in front of the ADC to be
+      chosen based on the signal bandwidth of interest, rather than the settling
+      requirements of the switched capacitor SAR ADC inputs.
+
+  adi,gain-milli:
+    description: |
+      The hardware gain applied to the ADC input (in milli units).
+      The gain provided by the ADC input scaler is defined by the hardware
+      connections between chip pins OUT+, R1K-, R1K1-, R1K+, R1K1+, and OUT-.
+      If not present, default to 1000 (no actual gain applied).
+    $ref: /schemas/types.yaml#/definitions/uint16
+    enum: [454, 909, 1000, 1900]
+    default: 1000
+
+  interrupts:
+    description:
+      The SDO pin can also function as a busy indicator. This node should be
+      connected to an interrupt that is triggered when the SDO line goes low
+      while the SDI line is high and the CNV line is low ("3-wire" mode) or the
+      SDI line is low and the CNV line is high ("4-wire" mode); or when the SDO
+      line goes high while the SDI and CNV lines are high (chain mode),
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vio-supply
+  - ref-supply
+
+allOf:
+  # Single-channel PulSAR devices have SDI either tied to VIO, GND, or host CS.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7687
+              - adi,ad7691
+              - adi,ad7942
+              - adi,ad7946
+              - adi,ad7983
+    then:
+      properties:
+        adi,sdi-pin:
+          enum: [ high, low, cs ]
+          default: cs
+  # The configuration register can only be accessed if SDI is connected to MOSI
+  - if:
+      required:
+        - adi,sdi-pin
+    then:
+      properties:
+        adi,high-z-input: false
+  # chain mode has lower SCLK max rate
+  - if:
+      required:
+        - '#daisy-chained-devices'
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 50000000 # for VIO > 2.7 V, 40000000 for VIO > 1.7 V
+  # Gain property only applies to ADAQ devices
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - adi,adaq4001
+                - adi,adaq4003
+    then:
+      properties:
+        adi,gain-milli: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "adi,ad4020";
+            reg = <0>;
+            spi-max-frequency = <71000000>;
+            vdd-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            ref-supply = <&supply_5V>;
+            adi,sdi-pin = "cs";
+            cnv-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "adi,adaq4003";
+            reg = <0>;
+            spi-max-frequency = <80000000>;
+            vdd-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            ref-supply = <&supply_5V>;
+            adi,high-z-input;
+            adi,gain-milli = /bits/ 16 <454>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
new file mode 100644
index 000000000000..54e7349317b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+# Copyright 2024 BayLibre, SAS.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4030.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4030 and AD4630 ADC families
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  Analog Devices AD4030 single channel and AD4630/AD4632 dual channel precision
+  SAR ADC families
+
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4030-24-4032-24.pdf
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-24_ad4632-24.pdf
+  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-16-4632-16.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4030-24
+      - adi,ad4032-24
+      - adi,ad4630-16
+      - adi,ad4630-24
+      - adi,ad4632-16
+      - adi,ad4632-24
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 102040816
+
+  spi-rx-bus-width:
+    enum: [1, 2, 4]
+
+  vdd-5v-supply: true
+  vdd-1v8-supply: true
+  vio-supply: true
+
+  ref-supply:
+    description:
+      Optional External unbuffered reference. Used when refin-supply is not
+      connected.
+
+  refin-supply:
+    description:
+      Internal buffered Reference. Used when ref-supply is not connected.
+
+  cnv-gpios:
+    description:
+      The Convert Input (CNV). It initiates the sampling conversions.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      The Reset Input (/RST). Used for asynchronous device reset.
+    maxItems: 1
+
+  interrupts:
+    description:
+      The BUSY pin is used to signal that the conversions results are available
+      to be transferred when in SPI Clocking Mode. This nodes should be
+      connected to an interrupt that is triggered when the BUSY line goes low.
+    maxItems: 1
+
+  interrupt-names:
+    const: busy
+
+required:
+  - compatible
+  - reg
+  - vdd-5v-supply
+  - vdd-1v8-supply
+  - vio-supply
+  - cnv-gpios
+
+oneOf:
+  - required:
+      - ref-supply
+  - required:
+      - refin-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4030-24";
+            reg = <0>;
+            spi-max-frequency = <80000000>;
+            vdd-5v-supply = <&supply_5V>;
+            vdd-1v8-supply = <&supply_1_8V>;
+            vio-supply = <&supply_1_8V>;
+            ref-supply = <&supply_5V>;
+            cnv-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
new file mode 100644
index 000000000000..ccd6a0ac1539
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4080.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4080 20-Bit, 40 MSPS, Differential SAR ADC
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The AD4080 is a high speed, low noise, low distortion, 20-bit, Easy Drive,
+  successive approximation register (SAR) analog-to-digital converter (ADC).
+  Maintaining high performance (signal-to-noise and distortion (SINAD) ratio
+  > 90 dBFS) at signal frequencies in excess of 1 MHz enables the AD4080 to
+  service a wide variety of precision, wide bandwidth data acquisition
+  applications.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4080.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4080
+      - adi,ad4081
+      - adi,ad4083
+      - adi,ad4084
+      - adi,ad4086
+      - adi,ad4087
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    description: Configuration of the SPI bus.
+    maximum: 50000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cnv
+
+  vdd33-supply: true
+
+  vdd11-supply: true
+
+  vddldo-supply: true
+
+  iovdd-supply: true
+
+  vrefin-supply: true
+
+  io-backends:
+    maxItems: 1
+
+  adi,lvds-cnv-enable:
+    description: Enable the LVDS signal type on the CNV pin. Default is CMOS.
+    type: boolean
+
+  adi,num-lanes:
+    description:
+      Number of lanes on which the data is sent on the output (DA, DB pins).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    default: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vdd33-supply
+  - vrefin-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad4080";
+          reg = <0>;
+          spi-max-frequency = <10000000>;
+          vdd33-supply = <&vdd33>;
+          vddldo-supply = <&vddldo>;
+          vrefin-supply = <&vrefin>;
+          clocks = <&cnv>;
+          clock-names = "cnv";
+          io-backends = <&iio_backend>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
new file mode 100644
index 000000000000..d00690a8d3fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4130 ADC device driver
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD4130 ADC. Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4130
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: phandle to the master clock (mclk)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    description: |
+      Specify which interrupt pin should be configured as Data Ready / FIFO
+      interrupt.
+      Default if not supplied is int.
+    enum:
+      - int
+      - clk
+      - p2
+      - dout
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  refin1-supply:
+    description: refin1 supply. Can be used as reference for conversion.
+
+  refin2-supply:
+    description: refin2 supply. Can be used as reference for conversion.
+
+  avdd-supply:
+    description: AVDD voltage supply. Can be used as reference for conversion.
+
+  iovdd-supply:
+    description: IOVDD voltage supply. Used for the chip interface.
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  adi,ext-clk-freq-hz:
+    description: Specify the frequency of the external clock.
+    enum: [76800, 153600]
+    default: 76800
+
+  adi,bipolar:
+    description: Specify if the device should be used in bipolar mode.
+    type: boolean
+
+  adi,vbias-pins:
+    description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 15
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+patternProperties:
+  "^channel@([0-9a-f])$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The channel number.
+        minimum: 0
+        maximum: 15
+
+      diff-channels:
+        description: |
+          Besides the analog inputs available, internal inputs can be used.
+          16: Internal temperature sensor.
+          17: AVSS
+          18: Internal reference
+          19: DGND
+          20: (AVDD − AVSS)/6+
+          21: (AVDD − AVSS)/6-
+          22: (IOVDD − DGND)/6+
+          23: (IOVDD − DGND)/6-
+          24: (ALDO − AVSS)/6+
+          25: (ALDO − AVSS)/6-
+          26: (DLDO − DGND)/6+
+          27: (DLDO − DGND)/6-
+          28: V_MV_P
+          29: V_MV_M
+        items:
+          minimum: 0
+          maximum: 29
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on the
+          specific channel. Valid values are:
+          0: REFIN1(+)/REFIN1(−)
+          1: REFIN2(+)/REFIN2(−)
+          2: REFOUT/AVSS (Internal reference)
+          3: AVDD/AVSS
+          If not specified, REFIN1 is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+
+      adi,excitation-pin-0:
+        description: |
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-pin-1:
+        description: |
+          Analog input to apply excitation current to while this channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-current-0-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-0 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,excitation-current-1-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-1 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,burnout-current-nanoamp:
+        description: |
+          Burnout current in nanoamps to be applied for this channel.
+        enum: [0, 500, 2000, 4000]
+        default: 0
+
+      adi,buffered-positive:
+        description: Enable buffered mode for positive input.
+        type: boolean
+
+      adi,buffered-negative:
+        description: Enable buffered mode for negative input.
+        type: boolean
+
+    required:
+      - reg
+      - diff-channels
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad4130";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi-max-frequency = <5000000>;
+        interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpio>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,reference-select = <2>;
+
+          /* AIN8, AIN9 */
+          diff-channels = <8 9>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,reference-select = <2>;
+
+          /* AIN10, AIN11 */
+          diff-channels = <10 11>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,reference-select = <2>;
+
+          /* Temperature Sensor, DGND */
+          diff-channels = <16 19>;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,reference-select = <2>;
+
+          /* Internal reference, DGND */
+          diff-channels = <18 19>;
+        };
+
+        channel@4 {
+          reg = <4>;
+
+          adi,reference-select = <2>;
+
+          /* DGND, DGND */
+          diff-channels = <19 19>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4170-4.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4170-4.yaml
new file mode 100644
index 000000000000..da93213d12d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4170-4.yaml
@@ -0,0 +1,554 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4170-4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4170-4 and similar Analog to Digital Converters
+
+maintainers:
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+
+description: |
+  Analog Devices AD4170-4 series of Sigma-delta Analog to Digital Converters.
+  Specifications can be found at:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4170-4.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4190-4.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad4195-4.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+$defs:
+  reference-buffer:
+    description: |
+      Enable precharge buffer, full buffer, or skip reference buffering of
+      the positive/negative voltage reference. Because the output impedance
+      of the source driving the voltage reference inputs may be dynamic,
+      resistive/capacitive combinations of those inputs can cause DC gain
+      errors if the reference inputs go unbuffered into the ADC. Enable
+      reference buffering if the provided reference source has dynamic high
+      impedance output. Note the absolute voltage allowed on REFINn+ and REFINn-
+      inputs is from AVSS - 50 mV to AVDD + 50 mV when the reference buffers are
+      disabled but narrows to AVSS to AVDD when reference buffering is enabled
+      or in precharge mode.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ precharge, full, disabled ]
+    default: full
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4170-4
+      - adi,ad4190-4
+      - adi,ad4195-4
+
+  avss-supply:
+    description:
+      Reference voltage supply for AVSS. A −2.625V minimum and 0V maximum supply
+      that powers the chip. If not provided, AVSS is assumed to be at system
+      ground (0V).
+
+  avdd-supply:
+    description:
+      A supply of 4.75V to 5.25V relative to AVSS that powers the chip (AVDD).
+
+  iovdd-supply:
+    description: 1.7V to 5.25V reference supply to the serial interface (IOVDD).
+
+  refin1p-supply:
+    description: REFIN+ supply that can be used as reference for conversion.
+
+  refin1n-supply:
+    description: REFIN- supply that can be used as reference for conversion.
+
+  refin2p-supply:
+    description: REFIN2+ supply that can be used as reference for conversion.
+
+  refin2n-supply:
+    description: REFIN2- supply that can be used as reference for conversion.
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  interrupts:
+    description:
+      Interrupt for signaling the completion of conversion results. The data
+      ready signal (RDY) used as interrupt is by default provided on the SDO
+      pin. Alternatively, it can be provided on the DIG_AUX1 pin in which case
+      the chip disables the RDY function on SDO. Thus, there can be only one
+      data ready interrupt enabled at a time.
+
+  interrupt-names:
+    description:
+      Specify which pin should be configured as Data Ready interrupt.
+    enum:
+      - sdo
+      - dig_aux1
+
+  clocks:
+    maxItems: 1
+    description:
+      Optional external clock source. Can specify either an external clock or
+      external crystal.
+
+  clock-names:
+    enum:
+      - ext-clk
+      - xtal
+    default: ext-clk
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is for the GPIO number: 0 to 3.
+      The second cell takes standard GPIO flags.
+
+  ldac-gpios:
+    description:
+      GPIO connected to DIG_AUX2 pin to be used as LDAC toggle to control the
+      transfer of data from the DAC_INPUT_A register to the DAC.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  adi,vbias-pins:
+    description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 9
+    items:
+      minimum: 0
+      maximum: 8
+
+allOf:
+  # Some devices don't have integrated DAC
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad4190-4
+              - adi,ad4195-4
+    then:
+      properties:
+        ldac-gpios: false
+
+  # Require to specify the interrupt pin when using interrupts
+  - if:
+      required:
+        - interrupts
+    then:
+      required:
+        - interrupt-names
+
+  # If an external clock is set, the internal clock cannot go out and vice versa
+  - oneOf:
+      - required: [clocks]
+        properties:
+          '#clock-cells': false
+      - required: ['#clock-cells']
+        properties:
+          clocks: false
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - iovdd-supply
+  - spi-cpol
+  - spi-cpha
+
+unevaluatedProperties: false
+
+patternProperties:
+  "^channel@[0-9a-f]$":
+    $ref: /schemas/iio/adc/adc.yaml#
+    unevaluatedProperties: false
+    description:
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description:
+          The channel number.
+        minimum: 0
+        maximum: 15
+
+      diff-channels:
+        description: |
+          This property is used for defining the inputs of a differential
+          voltage channel. The first value is the positive input and the second
+          value is the negative input of the channel.
+
+          Besides the analog input pins AIN0 to AIN8, there are special inputs
+          that can be selected with the following values:
+          17: Internal temperature sensor
+          18: (AVDD-AVSS)/5
+          19: (IOVDD-DGND)/5
+          20: DAC output
+          21: ALDO
+          22: DLDO
+          23: AVSS
+          24: DGND
+          25: REFIN+
+          26: REFIN-
+          27: REFIN2+
+          28: REFIN2-
+          29: REFOUT
+          For the internal temperature sensor, use the input number for both
+          inputs (i.e. diff-channels = <17 17>).
+        items:
+          enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 17, 18, 19, 20, 21, 22, 23, 24, 25,
+                 26, 27, 28, 29]
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on the
+          specific channel. Valid values are:
+          0: REFIN+/REFIN-
+          1: REFIN2+/REFIN2−
+          2: REFOUT/AVSS (internal reference)
+          3: AVDD/AVSS
+          If not specified, REFOUT/AVSS is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 1
+
+      adi,positive-reference-buffer:
+        $ref: '#/$defs/reference-buffer'
+
+      adi,negative-reference-buffer:
+        $ref: '#/$defs/reference-buffer'
+
+      adi,sensor-type:
+        description:
+          The AD4170-4 and similar designs have features to aid interfacing with
+          load cell weigh scale, RTD, and thermocouple sensors. Each of those
+          sensor types requires either distinct wiring configuration or
+          external circuitry for proper sensor operation and can use different
+          ADC chip functionality on their setups. A key characteristic of those
+          external sensors is that they must be excited either by voltage supply
+          or by ADC chip excitation signals. The sensor can then be read through
+          a pair of analog inputs. This property specifies which particular
+          sensor type is connected to the ADC so it can be properly setup and
+          handled. Omit this property for conventional (not weigh scale, RTD, or
+          thermocouple) ADC channel setups.
+        $ref: /schemas/types.yaml#/definitions/string
+        enum: [ weighscale, rtd, thermocouple ]
+
+      adi,excitation-pin-0:
+        description:
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 20
+        default: 0
+
+      adi,excitation-pin-1:
+        description:
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 20
+        default: 0
+
+      adi,excitation-pin-2:
+        description:
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 20
+        default: 0
+
+      adi,excitation-pin-3:
+        description:
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 20
+        default: 0
+
+      adi,excitation-current-0-microamp:
+        description:
+          Excitation current in microamperes to be applied to pin specified in
+          adi,excitation-pin-0 while this channel is active.
+        enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+        default: 0
+
+      adi,excitation-current-1-microamp:
+        description:
+          Excitation current in microamperes to be applied to pin specified in
+          adi,excitation-pin-1 while this channel is active.
+        enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+        default: 0
+
+      adi,excitation-current-2-microamp:
+        description:
+          Excitation current in microamperes to be applied to pin specified in
+          adi,excitation-pin-2 while this channel is active.
+        enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+        default: 0
+
+      adi,excitation-current-3-microamp:
+        description:
+          Excitation current in microamperes to be applied to pin specified in
+          adi,excitation-pin-3 while this channel is active.
+        enum: [0, 10, 50, 100, 250, 500, 1000, 1500]
+        default: 0
+
+      adi,excitation-ac:
+        type: boolean
+        description:
+          Whether the external sensor has to be AC or DC excited. When omitted,
+          it is DC excited.
+
+    allOf:
+      - oneOf:
+          - required: [single-channel, common-mode-channel]
+            properties:
+              diff-channels: false
+          - required: [diff-channels]
+            properties:
+              single-channel: false
+              common-mode-channel: false
+      # Usual ADC channels don't need external circuitry excitation.
+      - if:
+          not:
+            required:
+              - adi,sensor-type
+        then:
+          properties:
+            adi,excitation-pin-0: false
+            adi,excitation-pin-1: false
+            adi,excitation-pin-2: false
+            adi,excitation-pin-3: false
+            adi,excitation-current-0-microamp: false
+            adi,excitation-current-1-microamp: false
+            adi,excitation-current-2-microamp: false
+            adi,excitation-current-3-microamp: false
+            adi,excitation-ac: false
+      # Weigh scale bridge AC excited with one pair of predefined signals.
+      - if:
+          allOf:
+            - properties:
+                adi,sensor-type:
+                  contains:
+                    const: weighscale
+            - required:
+                - adi,excitation-ac
+                - adi,excitation-pin-2
+                - adi,excitation-pin-3
+            - not:
+                required:
+                  - adi,excitation-current-2-microamp
+                  - adi,excitation-current-3-microamp
+        then:
+          properties:
+            adi,excitation-pin-2:
+              const: 19
+            adi,excitation-pin-3:
+              const: 20
+      # Weigh scale bridge AC excited with two pairs of predefined signals.
+      - if:
+          allOf:
+            - properties:
+                adi,sensor-type:
+                  contains:
+                    const: weighscale
+            - required:
+                - adi,excitation-ac
+                - adi,excitation-pin-0
+                - adi,excitation-pin-1
+                - adi,excitation-pin-2
+                - adi,excitation-pin-3
+            - not:
+                required:
+                  - adi,excitation-current-0-microamp
+                  - adi,excitation-current-1-microamp
+                  - adi,excitation-current-2-microamp
+                  - adi,excitation-current-3-microamp
+        then:
+          properties:
+            adi,excitation-pin-0:
+              const: 17
+            adi,excitation-pin-1:
+              const: 18
+            adi,excitation-pin-2:
+              const: 19
+            adi,excitation-pin-3:
+              const: 20
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4170-4";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            spi-cpol;
+            spi-cpha;
+            avdd-supply = <&avdd>;
+            iovdd-supply = <&iovdd>;
+            clocks = <&clk>;
+            clock-names = "xtal";
+            interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "dig_aux1";
+            adi,vbias-pins = <8>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            // Sample AIN0 with respect to DGND throughout AVDD/DGND input range
+            // Pseudo-differential unipolar
+            channel@0 {
+                reg = <0>;
+                single-channel = <0>;
+                common-mode-channel = <24>;
+                adi,reference-select = <3>;
+            };
+            // Weigh scale sensor
+            channel@1 {
+                reg = <1>;
+                bipolar;
+                diff-channels = <1 2>;
+                adi,reference-select = <0>;
+                adi,positive-reference-buffer = "precharge";
+                adi,negative-reference-buffer = "precharge";
+                adi,sensor-type = "weighscale";
+                adi,excitation-pin-2 = <19>;
+                adi,excitation-pin-3 = <20>;
+                adi,excitation-ac;
+            };
+            // RTD sensor
+            channel@2 {
+                reg = <2>;
+                bipolar;
+                diff-channels = <3 4>;
+                adi,reference-select = <0>;
+                adi,sensor-type = "rtd";
+                adi,excitation-pin-0 = <5>;
+                adi,excitation-pin-1 = <6>;
+                adi,excitation-current-0-microamp = <500>;
+                adi,excitation-current-1-microamp = <500>;
+                adi,excitation-ac;
+            };
+            // Thermocouple sensor
+            channel@3 {
+                reg = <3>;
+                bipolar;
+                diff-channels = <7 8>;
+                adi,reference-select = <0>;
+                adi,sensor-type = "thermocouple";
+                adi,excitation-pin-0 = <18>;
+                adi,excitation-current-0-microamp = <500>;
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4170-4";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            spi-cpol;
+            spi-cpha;
+            avdd-supply = <&avdd>;
+            iovdd-supply = <&iovdd>;
+            #clock-cells = <0>;
+            clock-output-names = "ad4170-clk16mhz";
+            interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "dig_aux1";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            // Sample AIN0 with respect to AIN1 throughout AVDD/AVSS input range
+            // Differential bipolar. If AVSS < 0V, differential true bipolar
+            channel@0 {
+                reg = <0>;
+                bipolar;
+                diff-channels = <0 1>;
+                adi,reference-select = <3>;
+            };
+            // Sample AIN2 with respect to DGND throughout AVDD/DGND input range
+            // Pseudo-differential unipolar
+            channel@1 {
+                reg = <1>;
+                single-channel = <2>;
+                common-mode-channel = <24>;
+                adi,reference-select = <3>;
+            };
+            // Sample AIN3 with respect to 2.5V throughout AVDD/AVSS input range
+            // Pseudo-differential bipolar
+            channel@2 {
+                reg = <2>;
+                bipolar;
+                single-channel = <3>;
+                common-mode-channel = <29>;
+                adi,reference-select = <3>;
+            };
+            // Sample AIN4 with respect to DGND throughout AVDD/AVSS input range
+            // Pseudo-differential bipolar
+            channel@3 {
+                reg = <3>;
+                bipolar;
+                single-channel = <4>;
+                common-mode-channel = <24>;
+                adi,reference-select = <3>;
+            };
+            // Sample AIN5 with respect to 2.5V throughout AVDD/AVSS input range
+            // Pseudo-differential unipolar (AD4170-4 datasheet page 46 example)
+            channel@4 {
+                reg = <4>;
+                single-channel = <5>;
+                common-mode-channel = <29>;
+                adi,reference-select = <3>;
+            };
+            // Sample AIN6 with respect to 2.5V throughout REFIN+/REFIN- input range
+            // Pseudo-differential bipolar
+            channel@5 {
+                reg = <5>;
+                bipolar;
+                single-channel = <6>;
+                common-mode-channel = <29>;
+                adi,reference-select = <0>;
+            };
+            // Weigh scale sensor
+            channel@6 {
+                reg = <6>;
+                bipolar;
+                diff-channels = <7 8>;
+                adi,reference-select = <0>;
+                adi,sensor-type = "weighscale";
+                adi,excitation-pin-0 = <17>;
+                adi,excitation-pin-1 = <18>;
+                adi,excitation-pin-2 = <19>;
+                adi,excitation-pin-3 = <20>;
+                adi,excitation-ac;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml
new file mode 100644
index 000000000000..cbde7a0505d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4695.yaml
@@ -0,0 +1,268 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4695.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Easy Drive Multiplexed SAR Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  A family of similar multi-channel analog to digital converters with SPI bus.
+
+  * https://www.analog.com/en/products/ad4695.html
+  * https://www.analog.com/en/products/ad4696.html
+  * https://www.analog.com/en/products/ad4697.html
+  * https://www.analog.com/en/products/ad4698.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4695
+      - adi,ad4696
+      - adi,ad4697
+      - adi,ad4698
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 80000000
+
+  spi-cpol: true
+  spi-cpha: true
+
+  spi-rx-bus-width:
+    minimum: 1
+    maximum: 4
+
+  avdd-supply:
+    description: Analog power supply.
+
+  vio-supply:
+    description: I/O pin power supply.
+
+  ldo-in-supply:
+    description: Internal LDO Input. Mutually exclusive with vdd-supply.
+
+  vdd-supply:
+    description: Core power supply. Mutually exclusive with ldo-in-supply.
+
+  ref-supply:
+    description:
+      External reference voltage. Mutually exclusive with refin-supply.
+
+  refin-supply:
+    description:
+      Internal reference buffer input. Mutually exclusive with ref-supply.
+
+  com-supply:
+    description: Common voltage supply for pseudo-differential analog inputs.
+
+  adi,no-ref-current-limit:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When this flag is present, the REF Overvoltage Reduced Current protection
+      is disabled.
+
+  adi,no-ref-high-z:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable this flag if the ref-supply requires Reference Input High-Z Mode
+      to be disabled for proper operation.
+
+  cnv-gpios:
+    description: The Convert Input (CNV). If omitted, CNV is tied to SPI CS.
+    maxItems: 1
+
+  reset-gpios:
+    description: The Reset Input (RESET). Should be configured GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  pwms:
+    description: PWM signal connected to the CNV pin.
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Signal coming from the BSY_ALT_GP0 pin (ALERT or BUSY).
+      - description: Signal coming from the GP2 pin (ALERT).
+      - description: Signal coming from the GP3 pin (BUSY).
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: gp0
+      - const: gp2
+      - const: gp3
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is the GPn number: 0 to 3.
+      The second cell takes standard GPIO flags.
+
+  '#trigger-source-cells':
+    description: |
+      First cell indicates the output signal: 0 = BUSY, 1 = ALERT.
+      Second cell indicates which GPn pin is used: 0, 2 or 3.
+
+      For convenience, macros for these values are available in
+      dt-bindings/iio/adc/adi,ad4695.h.
+    const: 2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^in(?:[13579]|1[135])-supply$":
+    description:
+      Optional voltage supply for odd numbered channels when they are used as
+      the negative input for a pseudo-differential channel.
+
+  "^channel@[0-9a-f]$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+    description:
+      Describes each individual channel. In addition the properties defined
+      below, bipolar from adc.yaml is also supported.
+
+    properties:
+      reg:
+        maximum: 15
+
+      common-mode-channel:
+        description:
+          Describes the common mode channel for single channels. 0xFF is REFGND
+          and OxFE is COM. Macros are available for these values in
+          dt-bindings/iio/adc/adi,ad4695.h. Values 1 to 15 correspond to INx
+          inputs. Only odd numbered INx inputs can be used as common mode
+          channels.
+        enum: [1, 3, 5, 7, 9, 11, 13, 15, 0xFE, 0xFF]
+        default: 0xFF
+
+      adi,no-high-z:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Enable this flag if the input pin requires the Analog Input High-Z
+          Mode to be disabled for proper operation.
+
+    required:
+      - reg
+
+    allOf:
+      # bipolar mode can't be used with REFGND
+      - if:
+          properties:
+            common-mode-channel:
+              const: 0xFF
+        then:
+          properties:
+            bipolar: false
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vio-supply
+
+allOf:
+  - oneOf:
+      - required:
+          - ldo-in-supply
+      - required:
+          - vdd-supply
+
+  - oneOf:
+      - required:
+          - ref-supply
+      - required:
+          - refin-supply
+
+  # the internal reference buffer always requires high-z mode
+  - if:
+      required:
+        - refin-supply
+    then:
+      properties:
+        adi,no-ref-high-z: false
+
+  # limit channels for 8-channel chips
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad4697
+              - adi,ad4698
+    then:
+      patternProperties:
+        "^in(?:9|1[135])-supply$": false
+        "^channel@[0-7]$":
+          properties:
+            reg:
+              maximum: 7
+            common-mode-channel:
+              enum: [1, 3, 5, 7, 0xFE, 0xFF]
+        "^channel@[8-9a-f]$": false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/iio/adc/adi,ad4695.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad4695";
+            reg = <0>;
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <80000000>;
+            avdd-supply = <&power_supply>;
+            ldo-in-supply = <&power_supply>;
+            vio-supply = <&io_supply>;
+            refin-supply = <&supply_5V>;
+            com-supply = <&supply_2V5>;
+            in3-supply = <&supply_2V5>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* Pseudo-differential channel between IN0 and REFGND. */
+            channel@0 {
+                reg = <0>;
+            };
+
+            /* Pseudo-differential channel between IN1 and COM. */
+            channel@1 {
+                reg = <1>;
+                common-mode-channel = <AD4695_COMMON_MODE_COM>;
+                bipolar;
+            };
+
+            /* Pseudo-differential channel between IN2 and IN3. */
+            channel@2 {
+                reg = <2>;
+                common-mode-channel = <3>;
+                bipolar;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml
new file mode 100644
index 000000000000..b107322e0ea3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4851.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4851.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD485X family
+
+maintainers:
+  - Sergiu Cuciurean <sergiu.cuciurean@analog.com>
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  Analog Devices AD485X fully buffered, 8-channel simultaneous sampling,
+  16/20-bit, 1 MSPS data acquisition system (DAS) with differential, wide
+  common-mode range inputs.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4855.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4856.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4857.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad4858.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4851
+      - adi,ad4852
+      - adi,ad4853
+      - adi,ad4854
+      - adi,ad4855
+      - adi,ad4856
+      - adi,ad4857
+      - adi,ad4858
+      - adi,ad4858i
+
+  reg:
+    maxItems: 1
+
+  vcc-supply: true
+
+  vee-supply: true
+
+  vdd-supply: true
+
+  vddh-supply: true
+
+  vddl-supply: true
+
+  vio-supply: true
+
+  vrefbuf-supply: true
+
+  vrefio-supply: true
+
+  pwms:
+    description: PWM connected to the CNV pin.
+    maxItems: 1
+
+  io-backends:
+    maxItems: 1
+
+  pd-gpios:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 25000000
+
+  spi-3wire: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel(@[0-7])?$":
+    $ref: adc.yaml
+    type: object
+    description: Represents the channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description:
+          The channel number, as specified in the datasheet (from 0 to 7).
+        minimum: 0
+        maximum: 7
+
+      diff-channels:
+        description:
+          Each channel can be configured as a bipolar differential channel.
+          The ADC uses the same positive and negative inputs for this.
+          This property must be specified as 'reg' (or the channel number) for
+          both positive and negative inputs (i.e. diff-channels = <reg reg>).
+          Since the configuration is bipolar differential, the 'bipolar'
+          property is required.
+        items:
+          minimum: 0
+          maximum: 7
+
+      bipolar: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - vee-supply
+  - vdd-supply
+  - vio-supply
+  - pwms
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0{
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "adi,ad4858";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            vcc-supply = <&vcc>;
+            vdd-supply = <&vdd>;
+            vee-supply = <&vee>;
+            vddh-supply = <&vddh>;
+            vddl-supply = <&vddl>;
+            vio-supply = <&vio>;
+            pwms = <&pwm_gen 0 0>;
+            io-backends = <&iio_backend>;
+
+            channel@0 {
+              reg = <0>;
+              diff-channels = <0 0>;
+              bipolar;
+            };
+
+            channel@1 {
+              reg = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
index 31ffa275f5fa..705adbe88def 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
@@ -4,51 +4,124 @@
 $id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
+title: Analog Devices AD7091R-2/-4/-5/-8 Multi-Channel 12-Bit ADCs
 
 maintainers:
-  - Beniamin Bia <beniamin.bia@analog.com>
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
 
 description: |
-  Analog Devices AD7091R5 4-Channel 12-Bit ADC
+  Analog Devices AD7091R5 4-Channel 12-Bit ADC supporting I2C interface
   https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf
+  Analog Devices AD7091R-2/AD7091R-4/AD7091R-8 2-/4-/8-Channel 12-Bit ADCs
+  supporting SPI interface
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7091R-2_7091R-4_7091R-8.pdf
 
 properties:
   compatible:
     enum:
+      - adi,ad7091r2
+      - adi,ad7091r4
       - adi,ad7091r5
+      - adi,ad7091r8
 
   reg:
     maxItems: 1
 
+  vdd-supply:
+    description:
+      Provide VDD power to the sensor (VDD range is from 2.7V to 5.25V).
+
+  vdrive-supply:
+    description:
+      Determines the voltage level at which the interface logic will operate.
+      The V_drive voltage range is from 1.8V to 5.25V and must not exceed VDD by
+      more than 0.3V.
+
   vref-supply:
     description:
       Phandle to the vref power supply
 
-  interrupts:
+  convst-gpios:
+    description:
+      GPIO connected to the CONVST pin.
+      This logic input is used to initiate conversions on the analog
+      input channels.
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt for signaling when conversion results exceed the high limit for
+      ADC readings or fall below the low limit for them. Interrupt source must
+      be attached to ALERT/BUSY/GPO0 pin.
+    maxItems: 1
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  # AD7091R-2 does not have ALERT/BUSY/GPO pin
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091r2
+    then:
+      properties:
+        interrupts: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7091r2
+              - adi,ad7091r4
+              - adi,ad7091r8
+    then:
+      required:
+        - convst-gpios
+
+unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         adc@2f {
-                compatible = "adi,ad7091r5";
-                reg = <0x2f>;
+            compatible = "adi,ad7091r5";
+            reg = <0x2f>;
+
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-                interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-                interrupt-parent = <&gpio>;
+        adc@0 {
+            compatible = "adi,ad7091r8";
+            reg = <0x0>;
+            spi-max-frequency = <1000000>;
+            vref-supply = <&adc_vref>;
+            convst-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+            interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index fb3d0dae9bae..2e3f84db6193 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -8,7 +8,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD7124 ADC device driver
 
 maintainers:
-  - Stefan Popa <stefan.popa@analog.com>
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 description: |
   Bindings for the Analog Devices AD7124 ADC device. Datasheet can be
@@ -27,16 +28,36 @@ properties:
 
   clocks:
     maxItems: 1
-    description: phandle to the master clock (mclk)
+    description: Optional external clock connected to the CLK pin.
 
   clock-names:
+    deprecated: true
+    description:
+      MCLK is an internal counter in the ADC. Do not use this property.
     items:
       - const: mclk
 
+  '#clock-cells':
+    description:
+      The CLK pin can be used as an output. When that is the case, include
+      this property.
+    const: 0
+
   interrupts:
     description: IRQ line for the ADC
     maxItems: 1
 
+  rdy-gpios:
+    description:
+      GPIO reading the R̅D̅Y̅ line. Having such a GPIO is technically optional but
+      highly recommended because DOUT/R̅D̅Y̅ toggles during SPI transfers (in its
+      DOUT aka MISO role) and so usually triggers a spurious interrupt. The
+      distinction between such a spurious event and a real one can only be done
+      by reading such a GPIO. (There is a register telling the same
+      information, but accessing that one needs a SPI transfer which then
+      triggers another interrupt event.)
+    maxItems: 1
+
   '#address-cells':
     const: 1
 
@@ -52,18 +73,20 @@ properties:
   avdd-supply:
     description: avdd supply can be used as reference for conversion.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
-  - clocks
-  - clock-names
   - interrupts
 
+# Can't have both clock input and output at the same time.
+not:
+  required:
+    - '#clock-cells'
+    - clocks
+
 patternProperties:
   "^channel@([0-9]|1[0-5])$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
     type: object
     description: |
       Represents the external channels which are connected to the ADC.
@@ -106,10 +129,14 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     spi {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -120,9 +147,8 @@ examples:
         spi-max-frequency = <5000000>;
         interrupts = <25 2>;
         interrupt-parent = <&gpio>;
+        rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
         refin1-supply = <&adc_vref>;
-        clocks = <&ad7124_mclk>;
-        clock-names = "mclk";
 
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml
new file mode 100644
index 000000000000..62d906e24997
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7173.yaml
@@ -0,0 +1,483 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7173.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7173 ADC
+
+maintainers:
+  - Ceclan Dumitru <dumitru.ceclan@analog.com>
+
+description: |
+  Analog Devices AD717x ADC's:
+  The AD717x family offer a complete integrated Sigma-Delta ADC solution which
+  can be used in high precision, low noise single channel applications
+  (Life Science measurements) or higher speed multiplexed applications
+  (Factory Automation PLC Input modules). The Sigma-Delta ADC is intended
+  primarily for measurement of signals close to DC but also delivers
+  outstanding performance with input bandwidths out to ~10kHz.
+
+  Analog Devices AD411x ADC's:
+  The AD411X family encompasses a series of low power, low noise, 24-bit,
+  sigma-delta analog-to-digital converters that offer a versatile range of
+  specifications. They integrate an analog front end suitable for processing
+  fully differential/single-ended and bipolar voltage inputs.
+
+  Datasheets for supported chips:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4111.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4112.pdf
+    <AD4113: not released yet>
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4114.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4115.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4116.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-2.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7172-4.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7173-8.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-2.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-8.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7176-2.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7177-2.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4111
+      - adi,ad4112
+      - adi,ad4113
+      - adi,ad4114
+      - adi,ad4115
+      - adi,ad4116
+      - adi,ad7172-2
+      - adi,ad7172-4
+      - adi,ad7173-8
+      - adi,ad7175-2
+      - adi,ad7175-8
+      - adi,ad7176-2
+      - adi,ad7177-2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: |
+          Ready: multiplexed with SPI data out. While SPI CS is low,
+          can be used to indicate the completion of a conversion.
+
+      - description: |
+          Error: The three error bits in the status register (ADC_ERROR, CRC_ERROR,
+          and REG_ERROR) are OR'ed, inverted, and mapped to the ERROR pin.
+          Therefore, the ERROR pin indicates that an error has occurred.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: rdy
+      - const: err
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  gpio-controller:
+    description: Marks the device node as a GPIO controller.
+
+  '#gpio-cells':
+    const: 2
+    description:
+      The first cell is the GPIO number and the second cell specifies
+      GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
+
+  vref-supply:
+    description: |
+      Differential external reference supply used for conversion. The reference
+      voltage (Vref) specified here must be the voltage difference between the
+      REF+ and REF- pins: Vref = (REF+) - (REF-).
+
+  vref2-supply:
+    description: |
+      Differential external reference supply used for conversion. The reference
+      voltage (Vref2) specified here must be the voltage difference between the
+      REF2+ and REF2- pins: Vref2 = (REF2+) - (REF2-).
+
+  avdd-supply:
+    description: Avdd supply, can be used as reference for conversion.
+                 This supply is referenced to AVSS, voltage specified here
+                 represents (AVDD1 - AVSS).
+
+  avdd2-supply:
+    description: Avdd2 supply, used as the input to the internal voltage regulator.
+                 This supply is referenced to AVSS, voltage specified here
+                 represents (AVDD2 - AVSS).
+
+  iovdd-supply:
+    description: iovdd supply, used for the chip digital interface.
+
+  clocks:
+    maxItems: 1
+    description: |
+      Optional external clock source. Can include one clock source: external
+      clock or external crystal.
+
+  clock-names:
+    enum:
+      - ext-clk
+      - xtal
+
+  '#clock-cells':
+    const: 0
+
+  rdy-gpios:
+    description:
+      GPIO reading the R̅D̅Y̅ line. Having such a GPIO is technically optional but
+      highly recommended because DOUT/R̅D̅Y̅ toggles during SPI transfers (in its
+      DOUT aka MISO role) and so usually triggers a spurious interrupt. The
+      distinction between such a spurious event and a real one can only be done
+      by reading such a GPIO. (There is a register telling the same
+      information, but accessing that one needs a SPI transfer which then
+      triggers another interrupt event.)
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-9a-f]$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 15
+
+      diff-channels:
+        description: |
+          This property is used for defining the inputs of a differential
+          voltage channel. The first value is the positive input and the second
+          value is the negative input of the channel.
+
+          Family AD411x supports a dedicated VINCOM voltage input.
+          To select it set the second channel to 16.
+            (VIN2, VINCOM) -> diff-channels = <2 16>
+
+          There are special values that can be selected besides the voltage
+          analog inputs:
+            21: REF+
+            22: REF−
+
+          Supported only by AD7172-2, AD7172-4, AD7175-2, AD7175-8, AD7177-2,
+          must be paired together and can be used to monitor the power supply
+          of the ADC:
+            19: ((AVDD1 − AVSS)/5)+
+            20: ((AVDD1 − AVSS)/5)−
+
+        items:
+          minimum: 0
+          maximum: 31
+
+      single-channel:
+        description: |
+          This property is used for defining a current channel or the positive
+          input of a voltage channel (single-ended or pseudo-differential).
+
+          Models AD4111 and AD4112 support current channels.
+            Example: (IIN2+, IIN2−) -> single-channel = <2>
+          To correctly configure a current channel set the "adi,current-channel"
+          property to true.
+
+          To configure a single-ended/pseudo-differential channel set the
+          "common-mode-channel" property to the desired negative voltage input.
+
+          When used as a voltage channel, special inputs are valid as well.
+        minimum: 0
+        maximum: 31
+
+      common-mode-channel:
+        description:
+          This property is used for defining the negative input of a
+          single-ended or pseudo-differential voltage channel.
+
+          Special inputs are valid as well.
+        minimum: 0
+        maximum: 31
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          vref       : REF+  /REF−
+          vref2      : REF2+ /REF2−
+          refout-avss: REFOUT/AVSS (Internal reference)
+          avdd       : AVDD  /AVSS
+
+          External reference ref2 only available on ad7173-8 and ad7172-4.
+          Internal reference refout-avss not available on ad7172-4.
+
+          If not specified, internal reference used (if available).
+        $ref: /schemas/types.yaml#/definitions/string
+        enum:
+          - vref
+          - vref2
+          - refout-avss
+          - avdd
+        default: refout-avss
+
+      adi,current-channel:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: |
+          Signal that the selected inputs are current channels.
+          Only available on AD4111 and AD4112.
+
+    required:
+      - reg
+
+    allOf:
+      - oneOf:
+          - required: [single-channel]
+            properties:
+              diff-channels: false
+          - required: [diff-channels]
+            properties:
+              single-channel: false
+              adi,current-channel: false
+              common-mode-channel: false
+
+      - if:
+          required: [common-mode-channel]
+        then:
+          properties:
+            adi,current-channel: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  # Only ad7172-4, ad7173-8 and ad7175-8 support vref2
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - adi,ad7172-4
+                - adi,ad7173-8
+                - adi,ad7175-8
+    then:
+      properties:
+        vref2-supply: false
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            adi,reference-select:
+              enum:
+                - vref
+                - refout-avss
+                - avdd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad4114
+              - adi,ad4115
+              - adi,ad4116
+              - adi,ad7173-8
+              - adi,ad7175-8
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 15
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7172-2
+              - adi,ad7175-2
+              - adi,ad7176-2
+              - adi,ad7177-2
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 3
+
+  # Model ad7172-4 does not support internal reference
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad7172-4
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 7
+            adi,reference-select:
+              enum:
+                - vref
+                - vref2
+                - avdd
+          required:
+            - adi,reference-select
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad4111
+              - adi,ad4112
+              - adi,ad4113
+              - adi,ad4114
+              - adi,ad4115
+              - adi,ad4116
+    then:
+      properties:
+        avdd2-supply: false
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - adi,ad4111
+                - adi,ad4112
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]$":
+          properties:
+            adi,current-channel: false
+
+  - if:
+      anyOf:
+        - required: [clock-names]
+        - required: [clocks]
+    then:
+      properties:
+        '#clock-cells': false
+
+unevaluatedProperties: false
+
+examples:
+  # Example AD7173-8 with external reference connected to REF+/REF-:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7173-8";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "rdy";
+        interrupt-parent = <&gpio>;
+        spi-max-frequency = <5000000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #clock-cells = <0>;
+
+        vref-supply = <&dummy_regulator>;
+
+        channel@0 {
+          reg = <0>;
+          bipolar;
+          diff-channels = <0 1>;
+          adi,reference-select = "vref";
+        };
+
+        channel@1 {
+          reg = <1>;
+          diff-channels = <2 3>;
+        };
+
+        channel@2 {
+          reg = <2>;
+          bipolar;
+          diff-channels = <4 5>;
+        };
+
+        channel@3 {
+          reg = <3>;
+          bipolar;
+          diff-channels = <6 7>;
+        };
+
+        channel@4 {
+          reg = <4>;
+          diff-channels = <8 9>;
+          adi,reference-select = "avdd";
+        };
+      };
+    };
+
+  # Example AD4111 with current channel and single-ended channel:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+       adc@0 {
+        compatible = "adi,ad4111";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "rdy";
+        interrupt-parent = <&gpio>;
+        rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+        spi-max-frequency = <5000000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #clock-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          bipolar;
+          diff-channels = <4 5>;
+        };
+
+        // Single ended channel VIN2/VINCOM
+        channel@1 {
+          reg = <1>;
+          bipolar;
+          single-channel = <2>;
+          common-mode-channel = <16>;
+        };
+
+        // Current channel IN2+/IN2-
+        channel@2 {
+          reg = <2>;
+          single-channel = <2>;
+          adi,current-channel;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7191.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7191.yaml
new file mode 100644
index 000000000000..801ed319ee82
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7191.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7191.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7191 ADC
+
+maintainers:
+  - Alisa-Dariana Roman <alisa.roman@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7191 ADC device. Datasheet can be
+  found here:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7191.pdf
+  The device's PDOWN pin must be connected to the SPI controller's chip select
+  pin.
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7191
+
+  reg:
+    maxItems: 1
+
+  spi-cpol: true
+
+  spi-cpha: true
+
+  clocks:
+    maxItems: 1
+    description:
+      Must be present when CLKSEL pin is tied HIGH to select external clock
+      source (either a crystal between MCLK1 and MCLK2 pins, or a
+      CMOS-compatible clock driving MCLK2 pin). Must be absent when CLKSEL pin
+      is tied LOW to use the internal 4.92MHz clock.
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply:
+    description: AVdd voltage supply
+
+  dvdd-supply:
+    description: DVdd voltage supply
+
+  vref-supply:
+    description: Vref voltage supply
+
+  odr-gpios:
+    description:
+      ODR1 and ODR2 pins for output data rate selection. Should be defined if
+      adi,odr-value is absent.
+    minItems: 2
+    maxItems: 2
+
+  adi,odr-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Should be present if ODR pins are pin-strapped. Possible values:
+      120 Hz (ODR1=0, ODR2=0)
+      60 Hz (ODR1=0, ODR2=1)
+      50 Hz (ODR1=1, ODR2=0)
+      10 Hz (ODR1=1, ODR2=1)
+      If defined, odr-gpios must be absent.
+    enum: [120, 60, 50, 10]
+
+  pga-gpios:
+    description:
+      PGA1 and PGA2 pins for gain selection. Should be defined if adi,pga-value
+      is absent.
+    minItems: 2
+    maxItems: 2
+
+  adi,pga-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Should be present if PGA pins are pin-strapped. Possible values:
+      Gain 1 (PGA1=0, PGA2=0)
+      Gain 8 (PGA1=0, PGA2=1)
+      Gain 64 (PGA1=1, PGA2=0)
+      Gain 128 (PGA1=1, PGA2=1)
+      If defined, pga-gpios must be absent.
+    enum: [1, 8, 64, 128]
+
+  temp-gpios:
+    description: TEMP pin for temperature sensor enable.
+    maxItems: 1
+
+  chan-gpios:
+    description: CHAN pin for input channel selection.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - dvdd-supply
+  - vref-supply
+  - spi-cpol
+  - spi-cpha
+  - temp-gpios
+  - chan-gpios
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - oneOf:
+      - required:
+          - adi,odr-value
+      - required:
+          - odr-gpios
+  - oneOf:
+      - required:
+          - adi,pga-value
+      - required:
+          - pga-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7191";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+            clocks = <&ad7191_mclk>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            avdd-supply = <&avdd>;
+            dvdd-supply = <&dvdd>;
+            vref-supply = <&vref>;
+            adi,pga-value = <1>;
+            odr-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>, <&gpio 24 GPIO_ACTIVE_HIGH>;
+            temp-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+            chan-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 22b7ed3723f6..0bd2c6906c83 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -21,8 +21,15 @@ properties:
       - adi,ad7190
       - adi,ad7192
       - adi,ad7193
+      - adi,ad7194
       - adi,ad7195
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
   reg:
     maxItems: 1
 
@@ -30,25 +37,41 @@ properties:
 
   spi-cpha: true
 
-  spi-max-frequency: true
-
   clocks:
     maxItems: 1
-    description: phandle to the master clock (mclk)
+    description:
+      Optionally, either a crystal can be attached externally between MCLK1 and
+      MCLK2 pins, or an external CMOS-compatible clock can drive the MCLK2
+      pin. If absent, internal 4.92MHz clock is used, which can be made
+      available on MCLK2 pin.
 
   clock-names:
-    items:
-      - const: mclk
+    enum:
+      - xtal
+      - mclk
+
+  "#clock-cells":
+    const: 0
+    description:
+      If present when internal clock is used, configured as clock provider.
 
   interrupts:
     maxItems: 1
 
+  aincom-supply:
+    description: |
+      AINCOM voltage supply. Analog inputs AINx are referenced to this input
+      when configured for pseudo-differential operation.
+
   dvdd-supply:
     description: DVdd voltage supply
 
   avdd-supply:
     description: AVdd voltage supply
 
+  vref-supply:
+    description: VRef voltage supply
+
   adi,rejection-60-Hz-enable:
     description: |
       This bit enables a notch at 60 Hz when the first notch of the sinc
@@ -83,41 +106,152 @@ properties:
     description: see Documentation/devicetree/bindings/iio/adc/adc.yaml
     type: boolean
 
+  rdy-gpios:
+    description:
+      GPIO reading the R̅D̅Y̅ line. Having such a GPIO is technically optional but
+      highly recommended because DOUT/R̅D̅Y̅ toggles during SPI transfers (in its
+      DOUT aka MISO role) and so usually triggers a spurious interrupt. The
+      distinction between such a spurious event and a real one can only be done
+      by reading such a GPIO. (There is a register telling the same
+      information, but accessing that one needs a SPI transfer which then
+      triggers another interrupt event.)
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-9a-f]+$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The channel index.
+        minimum: 0
+        maximum: 271
+
+      diff-channels:
+        description:
+          Both inputs can be connected to pins AIN1 to AIN16 by choosing the
+          appropriate value from 1 to 16.
+        items:
+          minimum: 1
+          maximum: 16
+
+      single-channel:
+        description:
+          Positive input can be connected to pins AIN1 to AIN16 by choosing the
+          appropriate value from 1 to 16. Negative input is connected to AINCOM.
+        minimum: 1
+        maximum: 16
+
+    oneOf:
+      - required:
+          - reg
+          - diff-channels
+      - required:
+          - reg
+          - single-channel
+
 required:
   - compatible
   - reg
-  - clocks
-  - clock-names
   - interrupts
   - dvdd-supply
   - avdd-supply
+  - vref-supply
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7190
+            - adi,ad7192
+            - adi,ad7193
+            - adi,ad7195
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]+$": false
+  - if:
+      anyOf:
+        - required:
+            - clocks
+        - required:
+            - clock-names
+    then:
+      properties:
+        "#clock-cells": false
+      required:
+        - clocks
+        - clock-names
+
+unevaluatedProperties: false
 
 examples:
   - |
-    spi0 {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      adc@0 {
-        compatible = "adi,ad7192";
-        reg = <0>;
-        spi-max-frequency = <1000000>;
-        spi-cpol;
-        spi-cpha;
-        clocks = <&ad7192_mclk>;
-        clock-names = "mclk";
-        interrupts = <25 0x2>;
-        interrupt-parent = <&gpio>;
-        dvdd-supply = <&dvdd>;
-        avdd-supply = <&avdd>;
-
-        adi,refin2-pins-enable;
-        adi,rejection-60-Hz-enable;
-        adi,buffer-enable;
-        adi,burnout-currents-enable;
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7192";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+            clocks = <&ad7192_mclk>;
+            clock-names = "mclk";
+            interrupts = <25 0x2>;
+            interrupt-parent = <&gpio>;
+            rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+            aincom-supply = <&aincom>;
+            dvdd-supply = <&dvdd>;
+            avdd-supply = <&avdd>;
+            vref-supply = <&vref>;
+
+            adi,refin2-pins-enable;
+            adi,rejection-60-Hz-enable;
+            adi,buffer-enable;
+            adi,burnout-currents-enable;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7194";
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+            #clock-cells = <0>;
+            interrupts = <25 0x2>;
+            interrupt-parent = <&gpio>;
+            rdy-gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+            aincom-supply = <&aincom>;
+            dvdd-supply = <&dvdd>;
+            avdd-supply = <&avdd>;
+            vref-supply = <&vref>;
+
+            channel@0 {
+                reg = <0>;
+                diff-channels = <1 6>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                single-channel = <1>;
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
new file mode 100644
index 000000000000..dfb8f305e2f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7280a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7280a Lithium Ion Battery Monitoring System
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Bindings for the Analog Devices AD7280a Battery Monitoring System.
+  Used in devices such as hybrid electric cars, battery backup and power tools.
+  Multiple chips can be daisy chained and accessed via a single SPI interface.
+  Data sheet found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7280A.pdf
+
+properties:
+  compatible:
+    const: adi,ad7280a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line for the ADC
+    maxItems: 1
+
+  adi,voltage-alert-last-chan:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Allows limiting of scope of which channels are considered for voltage
+      alerts, typically because not all are wired to anything. Only applies to
+      last device in the daisy chain.
+    default: 5
+    enum: [3, 4, 5]
+
+  adi,acquisition-time-ns:
+    description:
+      Additional time may be needed to charge the sampling capacitors depending
+      on external writing.
+    default: 400
+    enum: [400, 800, 1200, 1600]
+
+  adi,thermistor-termination:
+    type: boolean
+    description:
+      Enable the thermistor termination function.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7280a";
+        reg = <0>;
+        spi-max-frequency = <700000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 2>;
+        adi,thermistor-termination;
+        adi,acquisition-time-ns = <800>;
+        adi,voltage-alert-last-chan = <5>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
index 930f9e3904d7..0b2f5dc80600 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
@@ -44,4 +44,3 @@ examples:
       };
     };
 ...
-
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index a3e39a40c9b3..2aa1f4b063eb 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -30,8 +30,6 @@ properties:
 
   spi-cpha: true
 
-  spi-max-frequency: true
-
   '#address-cells':
     const: 1
 
@@ -45,7 +43,7 @@ required:
 
 patternProperties:
   "^channel@[0-7]$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
     type: object
     description: |
       Represents the external channels which are connected to the ADC.
@@ -63,9 +61,12 @@ patternProperties:
     required:
       - reg
 
-    additionalProperties: true
+    additionalProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
index ca414bb396c5..cd8ac5162d27 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
@@ -24,13 +24,15 @@ properties:
 
   vref-supply: true
   vdd-supply: true
-  spi-max-frequency: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
new file mode 100644
index 000000000000..b91bfb16ed6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -0,0 +1,316 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7380.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Simultaneous Sampling Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  * https://www.analog.com/en/products/ad7380.html
+  * https://www.analog.com/en/products/ad7381.html
+  * https://www.analog.com/en/products/ad7383.html
+  * https://www.analog.com/en/products/ad7384.html
+  * https://www.analog.com/en/products/ad7386.html
+  * https://www.analog.com/en/products/ad7387.html
+  * https://www.analog.com/en/products/ad7388.html
+  * https://www.analog.com/en/products/ad7380-4.html
+  * https://www.analog.com/en/products/ad7381-4.html
+  * https://www.analog.com/en/products/ad7383-4.html
+  * https://www.analog.com/en/products/ad7384-4.html
+  * https://www.analog.com/en/products/ad7386-4.html
+  * https://www.analog.com/en/products/ad7387-4.html
+  * https://www.analog.com/en/products/ad7388-4.html
+  * https://www.analog.com/en/products/ad7389-4.html
+  * https://www.analog.com/en/products/adaq4370-4.html
+  * https://www.analog.com/en/products/adaq4380-4.html
+  * https://www.analog.com/en/products/adaq4381-4.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7380
+      - adi,ad7381
+      - adi,ad7383
+      - adi,ad7384
+      - adi,ad7386
+      - adi,ad7387
+      - adi,ad7388
+      - adi,ad7380-4
+      - adi,ad7381-4
+      - adi,ad7383-4
+      - adi,ad7384-4
+      - adi,ad7386-4
+      - adi,ad7387-4
+      - adi,ad7388-4
+      - adi,ad7389-4
+      - adi,adaq4370-4
+      - adi,adaq4380-4
+      - adi,adaq4381-4
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 80000000
+  spi-cpol: true
+  spi-cpha: true
+
+  vcc-supply:
+    description: A 3V to 3.6V supply that powers the chip.
+
+  vlogic-supply:
+    description:
+      A 1.65V to 3.6V supply for the logic pins.
+
+  refio-supply:
+    description:
+      A 2.5V to 3.3V supply for the external reference voltage. When omitted,
+      the internal 2.5V reference is used.
+
+  refin-supply:
+    description:
+      A 2.5V to 3.3V supply for external reference voltage, for ad7380-4 only.
+      For adaq devices, a 5V supply voltage. A 3.3V internal reference is
+      derived from it. Connect to vs-p-supply for normal operation.
+
+  vs-p-supply:
+    description:
+      Amplifiers positive supply.
+
+  vs-n-supply:
+    description:
+      Amplifiers negative supply.
+
+  ldo-supply:
+    description:
+      LDO supply. Connect to vs-p-supply or a 3.6 to 5.5 V supply.
+
+  aina-supply:
+    description:
+      The common mode voltage supply for the AINA- pin on pseudo-differential
+      chips.
+
+  ainb-supply:
+    description:
+      The common mode voltage supply for the AINB- pin on pseudo-differential
+      chips.
+
+  ainc-supply:
+    description:
+      The common mode voltage supply for the AINC- pin on pseudo-differential
+      chips.
+
+  aind-supply:
+    description:
+      The common mode voltage supply for the AIND- pin on pseudo-differential
+      chips.
+
+  interrupts:
+    description:
+      When the device is using 1-wire mode, this property is used to optionally
+      specify the ALERT interrupt.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - vlogic-supply
+
+patternProperties:
+  "^channel@[0-3]$":
+    $ref: adc.yaml
+    type: object
+
+    properties:
+      reg:
+        description:
+          The channel number. From 0 to 3 corresponding to channels A,B,C,D
+        minimum: 0
+        maximum: 3
+
+      adi,gain-milli:
+        description:
+          The hardware gain applied to the ADC input (in milli units).
+          If not present, default to 1000 (no actual gain applied).
+          Refer to the typical connection diagrams section of the datasheet for
+          pin wiring.
+        $ref: /schemas/types.yaml#/definitions/uint16
+        enum: [300, 600, 1000, 1600]
+        default: 1000
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+unevaluatedProperties: false
+
+allOf:
+  # pseudo-differential chips require common mode voltage supplies,
+  # true differential chips don't use them
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7383
+            - adi,ad7384
+            - adi,ad7383-4
+            - adi,ad7384-4
+    then:
+      required:
+        - aina-supply
+        - ainb-supply
+    else:
+      properties:
+        aina-supply: false
+        ainb-supply: false
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7383-4
+            - adi,ad7384-4
+    then:
+      required:
+        - ainc-supply
+        - aind-supply
+    else:
+      properties:
+        ainc-supply: false
+        aind-supply: false
+
+  # ad7380-4 uses refin-supply as external reference.
+  # adaq devices use internal reference only, derived from refin-supply
+  # All other chips from ad738x family use refio as optional external reference.
+  # When refio-supply is omitted, internal reference is used.
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,ad7380-4
+            - adi,adaq4370-4
+            - adi,adaq4380-4
+            - adi,adaq4381-4
+    then:
+      properties:
+        refio-supply: false
+      required:
+        - refin-supply
+    else:
+      properties:
+        refin-supply: false
+
+  # adi,ad7389-4 is internal reference only
+  - if:
+      properties:
+        compatible:
+          const: adi,ad7389-4
+    then:
+      properties:
+        refio-supply: false
+
+  # adaq devices need more supplies and using channel to declare gain property
+  # only applies to adaq devices
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,adaq4370-4
+            - adi,adaq4380-4
+            - adi,adaq4381-4
+    then:
+      required:
+        - vs-p-supply
+        - vs-n-supply
+        - ldo-supply
+    else:
+      properties:
+        vs-p-supply: false
+        vs-n-supply: false
+        ldo-supply: false
+      patternProperties:
+        "^channel@[0-3]$": false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7380";
+            reg = <0>;
+
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <80000000>;
+
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            vcc-supply = <&supply_3_3V>;
+            vlogic-supply = <&supply_3_3V>;
+            refio-supply = <&supply_2_5V>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,adaq4380-4";
+            reg = <0>;
+
+            spi-cpol;
+            spi-cpha;
+            spi-max-frequency = <80000000>;
+
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio0>;
+
+            vcc-supply = <&supply_3_3V>;
+            vlogic-supply = <&supply_3_3V>;
+            refin-supply = <&supply_5V>;
+            vs-p-supply = <&supply_5V>;
+            vs-n-supply = <&supply_0V>;
+            ldo-supply = <&supply_5V>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                adi,gain-milli = /bits/ 16 <300>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                adi,gain-milli = /bits/ 16 <600>;
+            };
+
+            channel@3 {
+                reg = <3>;
+                adi,gain-milli = /bits/ 16 <1000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7405.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7405.yaml
new file mode 100644
index 000000000000..57f097025705
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7405.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7405.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7405 family
+
+maintainers:
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+  - Pop Ioan Daniel <pop.ioan-daniel@analog.com>
+
+description: |
+  Analog Devices AD7405 is a high performance isolated ADC, 1-channel,
+  16-bit with a second-order Σ-Δ modulator that converts an analog input signal
+  into a high speed, single-bit data stream.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7405.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adum7701.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adum7702.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADuM7703.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7405
+      - adi,adum7701
+      - adi,adum7702
+      - adi,adum7703
+
+  clocks:
+    maxItems: 1
+
+  vdd1-supply: true
+
+  vdd2-supply: true
+
+  io-backends:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - vdd1-supply
+  - vdd2-supply
+  - io-backends
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "adi,ad7405";
+        clocks = <&axi_clk_gen 0>;
+        vdd1-supply = <&vdd1>;
+        vdd2-supply = <&vdd2>;
+        io-backends = <&axi_adc>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
index cf711082ad7d..55880191c511 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
@@ -17,39 +17,50 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - adi,ad7091
-      - adi,ad7091r
-      - adi,ad7273
-      - adi,ad7274
-      - adi,ad7276
-      - adi,ad7277
-      - adi,ad7278
-      - adi,ad7466
-      - adi,ad7467
-      - adi,ad7468
-      - adi,ad7475
-      - adi,ad7476
-      - adi,ad7476a
-      - adi,ad7477
-      - adi,ad7477a
-      - adi,ad7478
-      - adi,ad7478a
-      - adi,ad7495
-      - adi,ad7910
-      - adi,ad7920
-      - adi,ad7940
-      - ti,adc081s
-      - ti,adc101s
-      - ti,adc121s
-      - ti,ads7866
-      - ti,ads7867
-      - ti,ads7868
-      - lltc,ltc2314-14
+    oneOf:
+      - items:
+          - enum:
+              - adi,ad7091
+              - adi,ad7091r
+              - adi,ad7273
+              - adi,ad7274
+              - adi,ad7276
+              - adi,ad7277
+              - adi,ad7278
+              - adi,ad7466
+              - adi,ad7467
+              - adi,ad7468
+              - adi,ad7475
+              - adi,ad7476
+              - adi,ad7476a
+              - adi,ad7477
+              - adi,ad7477a
+              - adi,ad7478
+              - adi,ad7478a
+              - adi,ad7495
+              - adi,ad7910
+              - adi,ad7920
+              - adi,ad7940
+              - rohm,bd79105
+              - ti,adc081s
+              - ti,adc101s
+              - ti,adc121s
+              - ti,ads7866
+              - ti,ads7867
+              - ti,ads7868
+              - lltc,ltc2314-14
+      - items:
+          - const: rohm,bu79100g
+          - const: ti,ads7866
 
   reg:
     maxItems: 1
 
+  interrupts:
+    description:
+      The data-ready interrupt. Provided via DOUT pin.
+    maxItems: 1
+
   vcc-supply:
     description:
       Main powersupply voltage for the chips, sometimes referred to as VDD on
@@ -66,19 +77,35 @@ properties:
       to the other supplies. Needed to be able to establish channel scaling
       unless there is also an internal reference available (e.g. ad7091r)
 
-  spi-max-frequency: true
-
   adi,conversion-start-gpios:
     description: A GPIO used to trigger the start of a conversion
     maxItems: 1
 
+  rdy-gpios:
+    description: A GPIO for detecting the data-ready.
+    maxItems: 1
+
 required:
   - compatible
   - reg
 
-additionalProperties: false
-
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+# Devices with an IRQ
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rohm,bd79105
+    then:
+      properties:
+        interrupts: true
+    else:
+      properties:
+        interrupts: false
+
   # Devices where reference is vcc
   - if:
       properties:
@@ -98,24 +125,24 @@ allOf:
               - ti,adc121s
               - ti,ads7866
               - ti,ads7868
+    then:
       required:
         - vcc-supply
   # Devices with a vref
   - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - adi,ad7091r
-              - adi,ad7273
-              - adi,ad7274
-              - adi,ad7475
-              - lltc,ltc2314-14
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,ad7091r
+                - adi,ad7273
+                - adi,ad7274
+                - adi,ad7475
+                - lltc,ltc2314-14
+                - rohm,bd79105
     then:
       properties:
-        vref-supply: true
-    else:
-      properties:
         vref-supply: false
   # Devices with a vref where it is not optional
   - if:
@@ -127,35 +154,60 @@ allOf:
               - adi,ad7274
               - adi,ad7475
               - lltc,ltc2314-14
+              - rohm,bd79105
     then:
       required:
         - vref-supply
   - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,ad7475
+                - adi,ad7495
+                - rohm,bd79105
+    then:
       properties:
-        compatible:
-          contains:
-            enum:
-              - adi,ad7475
-              - adi,ad7495
+        vdrive-supply: false
+
+  # Devices which support polling the data-ready via GPIO
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - rohm,bd79105
     then:
       properties:
-        vdrive-supply: true
-    else:
+        rdy-gpios: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,ad7091
+                - adi,ad7091r
+                - rohm,bd79105
+    then:
       properties:
-        vdrive-supply: false
+        adi,conversion-start-gpios: false
+
+  # Devices with a convstart GPIO where it is not optional
   - if:
       properties:
         compatible:
           contains:
             enum:
-              - adi,ad7091
-              - adi,ad7091r
+              - rohm,bd79105
     then:
-      properties:
-        adi,conversion-start-gpios: true
-    else:
-      properties:
-        adi,conversion-start-gpios: false
+      required:
+        - adi,conversion-start-gpios
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 73775174cf57..73c8e9c532f3 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -7,135 +7,421 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD7606 Simultaneous Sampling ADC
 
 maintainers:
-  - Beniamin Bia <beniamin.bia@analog.com>
-  - Stefan Popa <stefan.popa@analog.com>
+  - Michael Hennerich <michael.hennerich@analog.com>
 
 description: |
   Analog Devices AD7606 Simultaneous Sampling ADC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7605-4.pdf
   https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf
   https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-16.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606c-18.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7607.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7608.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7609.pdf
   https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf
 
 properties:
   compatible:
     enum:
       - adi,ad7605-4
-      - adi,ad7606-8
-      - adi,ad7606-6
       - adi,ad7606-4
+      - adi,ad7606-6
+      - adi,ad7606-8  # Referred to as AD7606 (without -8) in the datasheet
       - adi,ad7606b
+      - adi,ad7606c-16
+      - adi,ad7606c-18
+      - adi,ad7607
+      - adi,ad7608
+      - adi,ad7609
       - adi,ad7616
 
   reg:
     maxItems: 1
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  '#trigger-source-cells':
+    description: |
+      Cell indicates the output signal: 0 = BUSY, 1 = FIRSTDATA.
+
+      For convenience, macros for these values are available in
+      dt-bindings/iio/adc/adi,ad7606.h.
+    const: 1
+
+  # According to the datasheet, "Data is clocked in from SDI on the falling
+  # edge of SCLK, while data is clocked out on DOUTA on the rising edge of
+  # SCLK".  Also, even if not stated textually in the datasheet, it is made
+  # clear on the diagrams that sclk idles at high.  Subsequently, in case SPI
+  # interface is used, the correct way is to only set spi-cpol.
   spi-cpha: true
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   avcc-supply: true
 
+  vdrive-supply:
+    description:
+      Determines the voltage level at which the interface logic pins will
+      operate.
+
+  refin-supply:
+    description:
+      The voltage supply for optional external reference voltage.
+
   interrupts:
+    description:
+      The BUSY pin falling edge indicates that the conversion is over, and thus
+      new data is available.
     maxItems: 1
 
   adi,conversion-start-gpios:
     description:
-      Must be the device tree identifier of the CONVST pin.
-      This logic input is used to initiate conversions on the analog
-      input channels. As the line is active high, it should be marked
-      GPIO_ACTIVE_HIGH.
-    maxItems: 1
+      Must be the device tree identifier of the CONVST pin(s). This logic input
+      is used to initiate conversions on the analog input channels. As the line
+      is active high, it should be marked GPIO_ACTIVE_HIGH.
+    minItems: 1
+    maxItems: 2
 
   reset-gpios:
     description:
-      Must be the device tree identifier of the RESET pin. If specified,
-      it will be asserted during driver probe. As the line is active high,
-      it should be marked GPIO_ACTIVE_HIGH.
+      Must be the device tree identifier of the RESET pin. If specified, it will
+      be asserted during driver probe. On the AD7606x, as the line is active
+      high, it should be marked GPIO_ACTIVE_HIGH. On the AD7616, as the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
     maxItems: 1
 
   standby-gpios:
     description:
-      Must be the device tree identifier of the STBY pin. This pin is used
-      to place the AD7606 into one of two power-down modes, Standby mode or
+      Must be the device tree identifier of the STBY pin. This pin is used to
+      place the AD7606 into one of two power-down modes, Standby mode or
       Shutdown mode. As the line is active low, it should be marked
       GPIO_ACTIVE_LOW.
     maxItems: 1
 
   adi,first-data-gpios:
     description:
-      Must be the device tree identifier of the FRSTDATA pin.
-      The FRSTDATA output indicates when the first channel, V1, is
-      being read back on either the parallel, byte or serial interface.
-      As the line is active high, it should be marked GPIO_ACTIVE_HIGH.
+      Must be the device tree identifier of the FRSTDATA pin. The FRSTDATA
+      output indicates when the first channel, V1, is being read back on either
+      the parallel, byte or serial interface. As the line is active high, it
+      should be marked GPIO_ACTIVE_HIGH.
     maxItems: 1
 
   adi,range-gpios:
     description:
-      Must be the device tree identifier of the RANGE pin. The polarity on
-      this pin determines the input range of the analog input channels. If
-      this pin is tied to a logic high, the analog input range is ±10V for
-      all channels. If this pin is tied to a logic low, the analog input range
+      Must be the device tree identifier of the RANGE pin. The state on this
+      pin determines the input range of the analog input channels. If this pin
+      is tied to a logic high, the analog input range is ±10V for all channels.
+      On the AD760X, if this pin is tied to a logic low, the analog input range
       is ±5V for all channels. As the line is active high, it should be marked
-      GPIO_ACTIVE_HIGH.
-    maxItems: 1
+      GPIO_ACTIVE_HIGH. On the AD7616, there are 2 pins, and if the 2 pins are
+      tied to a logic high, software mode is enabled, otherwise one of the 3
+      possible range values is selected.
+    minItems: 1
+    maxItems: 2
 
   adi,oversampling-ratio-gpios:
     description:
-      Must be the device tree identifier of the over-sampling
-      mode pins. As the line is active high, it should be marked
-      GPIO_ACTIVE_HIGH.
+      Must be the device tree identifier of the over-sampling mode pins. As the
+      line is active high, it should be marked GPIO_ACTIVE_HIGH. On the AD7606X
+      parts that support it, if all 3 pins are tied to a logic high, software
+      mode is enabled.
     maxItems: 3
 
   adi,sw-mode:
     description:
-      Software mode of operation, so far available only for ad7616 and ad7606b.
-      It is enabled when all three oversampling mode pins are connected to
-      high level. The device is configured by the corresponding registers. If the
-      adi,oversampling-ratio-gpios property is defined, then the driver will set the
-      oversampling gpios to high. Otherwise, it is assumed that the pins are hardwired
-      to VDD.
+      Software mode of operation, so far available only for AD7616 and AD7606B.
+      It is enabled when all three oversampling mode pins are connected to high
+      level for the AD7606B, or both the range selection are connected to high
+      level for the AD7616. The device is configured by the corresponding
+      registers. If the adi,oversampling-ratio-gpios property is defined, then
+      the driver will set the oversampling gpios to high. Otherwise, it is
+      assumed that the pins are hardwired to VDD.
     type: boolean
 
+  pwms:
+    description:
+      In case the conversion is triggered by a PWM instead of a GPIO plugged to
+      the CONVST pin, the PWM must be referenced.
+      The first is the PWM connected to CONVST or CONVST1 for the chips with the
+      2nd PWM connected to CONVST2, if CONVST2 is available and not shorted to
+      CONVST1.
+    minItems: 1
+    maxItems: 2
+
+  pwm-names:
+    minItems: 1
+    items:
+      - const: convst1
+      - const: convst2
+
+  io-backends:
+    description:
+      A reference to the iio-backend, which is responsible handling the BUSY
+      pin's falling edge and communication.
+      An example of backend can be found at
+      http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html
+
+patternProperties:
+  "^channel@[1-8]$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          The channel number, as specified in the datasheet (from 1 to 8).
+        minimum: 1
+        maximum: 8
+
+      diff-channels:
+        description:
+          Each channel can be configured as a bipolar differential channel.
+          The ADC uses the same positive and negative inputs for this.
+          This property must be specified as 'reg' (or the channel number) for
+          both positive and negative inputs (i.e. diff-channels = <reg reg>).
+          Since the configuration is bipolar differential, the 'bipolar'
+          property is required.
+        items:
+          minimum: 1
+          maximum: 8
+
+      bipolar:
+        description:
+          The ADC channels can be configured as
+             * Bipolar single-ended
+             * Unipolar single-ended
+             * Bipolar differential
+          Therefore in the DT, if no channel node is specified, it is considered
+          'unipolar single-ended'. So for the other configurations the 'bipolar'
+          property must be specified. If 'diff-channels' is specified, it is
+          considered a bipolar differential channel. Otherwise it is bipolar
+          single-ended.
+
+      adi,rfilter-ohms:
+        description:
+          For ADCs that supports gain calibration, this property must be set to
+          the value of the external RFilter resistor. Proper gain error
+          correction is applied based on this value.
+        default: 0
+        minimum: 0
+        maximum: 64512
+
+    required:
+      - reg
+      - bipolar
+
 required:
   - compatible
   - reg
-  - spi-cpha
   - avcc-supply
-  - interrupts
-  - adi,conversion-start-gpios
+  - vdrive-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  - oneOf:
+      - required:
+          - adi,conversion-start-gpios
+      - required:
+          - pwms
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad7616
+    then:
+      properties:
+        adi,first-data-gpios: false
+        standby-gpios: false
+        adi,range-gpios:
+          maxItems: 2
+    else:
+      properties:
+        adi,range-gpios:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7605-4
+              - adi,ad7616
+    then:
+      properties:
+        adi,oversampling-ratio-gpios: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7605-4
+              - adi,ad7606-4
+              - adi,ad7606-6
+              - adi,ad7606-8
+              - adi,ad7607
+              - adi,ad7608
+              - adi,ad7609
+              - adi,ad7616
+    then:
+      patternProperties:
+        "^channel@[0-9a-f]+$":
+          properties:
+            adi,rfilter-ohms: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7605-4
+              - adi,ad7606-4
+              - adi,ad7606-6
+              - adi,ad7606-8
+              - adi,ad7607
+              - adi,ad7608
+              - adi,ad7609
+    then:
+      properties:
+        adi,sw-mode: false
+    else:
+      properties:
+        pwms:
+          maxItems: 1
+        pwm-names:
+          maxItems: 1
+        adi,conversion-start-gpios:
+          maxItems: 1
+
+  - if:
+      not:
+        required:
+          - adi,sw-mode
+    then:
+      patternProperties:
+        "^channel@[1-8]$": false
 
-additionalProperties: false
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - adi,ad7606c-16
+              - adi,ad7606c-18
+    then:
+      patternProperties:
+        "^channel@[1-8]$": false
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    iio-backend {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adi_adc@0 {
+            compatible = "adi,ad7606b";
+            reg = <0>;
+            pwms = <&axi_pwm_gen 0 0>;
+
+            avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
+
+            reset-gpios = <&gpio0 91 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>;
+            adi,range-gpios = <&gpio0 89 GPIO_ACTIVE_HIGH>;
+            adi,oversampling-ratio-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH
+                                            &gpio0 87 GPIO_ACTIVE_HIGH
+                                            &gpio0 86 GPIO_ACTIVE_HIGH>;
+            io-backends = <&iio_backend>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7606-8";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+
+            avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
+
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+
+            adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+            adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+            adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
+                                           <&gpio 23 GPIO_ACTIVE_HIGH>,
+                                           <&gpio 26 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
         adc@0 {
-                compatible = "adi,ad7606-8";
-                reg = <0>;
-                spi-max-frequency = <1000000>;
-                spi-cpol;
-                spi-cpha;
-
-                avcc-supply = <&adc_vref>;
-
-                interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-                interrupt-parent = <&gpio>;
-
-                adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-                reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
-                adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
-                                               <&gpio 23 GPIO_ACTIVE_HIGH>,
-                                               <&gpio 26 GPIO_ACTIVE_HIGH>;
-                standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-                adi,sw-mode;
+            compatible = "adi,ad7606c-18";
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+
+            avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
+
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+
+            adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+            adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+
+            adi,sw-mode;
+
+            channel@1 {
+                reg = <1>;
+                diff-channels = <1 1>;
+                bipolar;
+            };
+
+            channel@3 {
+                reg = <3>;
+                bipolar;
+            };
+
+            channel@8 {
+                reg = <8>;
+                diff-channels = <8 8>;
+                bipolar;
+                adi,rfilter-ohms = <2048>;
+            };
+
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml
new file mode 100644
index 000000000000..8848562af28f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7625.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7625.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices Fast PulSAR Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  A family of single channel differential analog to digital converters.
+
+  * https://www.analog.com/en/products/ad7625.html
+  * https://www.analog.com/en/products/ad7626.html
+  * https://www.analog.com/en/products/ad7960.html
+  * https://www.analog.com/en/products/ad7961.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7625
+      - adi,ad7626
+      - adi,ad7960
+      - adi,ad7961
+
+  vdd1-supply: true
+  vdd2-supply: true
+  vio-supply: true
+
+  ref-supply:
+    description:
+      Voltage regulator for the external reference voltage (REF).
+
+  refin-supply:
+    description:
+      Voltage regulator for the reference buffer input (REFIN).
+
+  clocks:
+    description:
+      The clock connected to the CLK pins, gated by the clk_gate PWM.
+    maxItems: 1
+
+  pwms:
+    items:
+      - description: PWM connected to the CNV input on the ADC.
+      - description: PWM that gates the clock connected to the ADC's CLK input.
+
+  pwm-names:
+    items:
+      - const: cnv
+      - const: clk_gate
+
+  io-backends:
+    description:
+      The AXI ADC IP block connected to the D+/- and DCO+/- lines of the
+      ADC. An example backend can be found at
+      http://analogdevicesinc.github.io/hdl/projects/pulsar_lvds/index.html.
+    maxItems: 1
+
+  adi,no-dco:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates the wiring of the DCO+/- lines. If true, then they are
+      grounded and the device is in self-clocked mode. If this is not
+      present, then the device is in echoed clock mode.
+
+  adi,en0-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN0 is hard-wired to the high state. If neither this
+      nor en0-gpios are present, then EN0 is hard-wired low.
+
+  adi,en1-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN1 is hard-wired to the high state. If neither this
+      nor en1-gpios are present, then EN1 is hard-wired low.
+
+  adi,en2-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN2 is hard-wired to the high state. If neither this
+      nor en2-gpios are present, then EN2 is hard-wired low.
+
+  adi,en3-always-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates if EN3 is hard-wired to the high state. If neither this
+      nor en3-gpios are present, then EN3 is hard-wired low.
+
+  en0-gpios:
+    description:
+      Configurable EN0 pin.
+
+  en1-gpios:
+    description:
+      Configurable EN1 pin.
+
+  en2-gpios:
+    description:
+      Configurable EN2 pin.
+
+  en3-gpios:
+    description:
+      Configurable EN3 pin.
+
+required:
+  - compatible
+  - vdd1-supply
+  - vdd2-supply
+  - vio-supply
+  - clocks
+  - pwms
+  - pwm-names
+  - io-backends
+
+allOf:
+  - if:
+      required:
+        - ref-supply
+    then:
+      properties:
+        refin-supply: false
+  - if:
+      required:
+        - refin-supply
+    then:
+      properties:
+        ref-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7625
+              - adi,ad7626
+    then:
+      properties:
+        en2-gpios: false
+        en3-gpios: false
+        adi,en2-always-on: false
+        adi,en3-always-on: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad7960
+              - adi,ad7961
+    then:
+      # ad796x parts must have one of the two supplies
+      oneOf:
+        - required: [ref-supply]
+        - required: [refin-supply]
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    adc {
+        compatible = "adi,ad7625";
+        vdd1-supply = <&supply_5V>;
+        vdd2-supply = <&supply_2_5V>;
+        vio-supply = <&supply_2_5V>;
+        io-backends = <&axi_adc>;
+        clocks = <&ref_clk>;
+        pwms = <&axi_pwm_gen 0 0>, <&axi_pwm_gen 1 0>;
+        pwm-names = "cnv", "clk_gate";
+        en0-gpios = <&gpio0 86 GPIO_ACTIVE_HIGH>;
+        en1-gpios = <&gpio0 87 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index a85a28145ef6..c06d0fc791d3 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -26,7 +26,26 @@ properties:
   clock-names:
     const: mclk
 
+  trigger-sources:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    description: |
+      A list of phandles referencing trigger source providers. Each entry
+      represents a trigger source for the ADC:
+
+        - First entry specifies the device responsible for driving the
+          synchronization (SYNC_IN) pin, as an alternative to adi,sync-in-gpios.
+          This can be a `gpio-trigger` or another `ad7768-1` device. If the
+          device's own SYNC_OUT pin is internally connected to its SYNC_IN pin,
+          reference the device itself or omit this property.
+        - Second entry optionally defines a GPIO3 pin used as a START signal trigger.
+
+      Use the accompanying trigger source cell to identify the type of each entry.
+
   interrupts:
+    description:
+      DRDY (Data Ready) pin, which signals conversion results are available.
     maxItems: 1
 
   '#address-cells':
@@ -47,11 +66,22 @@ properties:
       in any way, for example if the filter decimation rate changes.
       As the line is active low, it should be marked GPIO_ACTIVE_LOW.
 
+  regulators:
+    type: object
+    description:
+      list of regulators provided by this controller.
+
+    properties:
+      vcm-output:
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
   reset-gpios:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpol: true
 
   spi-cpha: true
@@ -59,6 +89,23 @@ properties:
   "#io-channel-cells":
     const: 1
 
+  "#trigger-source-cells":
+    description: |
+      Cell indicates the trigger output signal: 0 = SYNC_OUT, 1 = GPIO3,
+      2 = DRDY.
+
+      For better readability, macros for these values are available in
+      dt-bindings/iio/adc/adi,ad7768-1.h.
+    const: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+    description: |
+      The first cell is for the GPIO number: 0 to 3.
+      The second cell takes standard GPIO flags.
+
 required:
   - compatible
   - reg
@@ -67,7 +114,16 @@ required:
   - vref-supply
   - spi-cpol
   - spi-cpha
-  - adi,sync-in-gpios
+
+dependencies:
+  adi,sync-in-gpios:
+    not:
+      required:
+        - trigger-sources
+  trigger-sources:
+    not:
+      required:
+        - adi,sync-in-gpios
 
 patternProperties:
   "^channel@([0-9]|1[0-5])$":
@@ -88,7 +144,10 @@ patternProperties:
       - reg
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -104,6 +163,8 @@ examples:
             spi-max-frequency = <2000000>;
             spi-cpol;
             spi-cpha;
+            gpio-controller;
+            #gpio-cells = <2>;
             vref-supply = <&adc_vref>;
             interrupts = <25 IRQ_TYPE_EDGE_RISING>;
             interrupt-parent = <&gpio>;
@@ -119,6 +180,12 @@ examples:
                 reg = <0>;
                 label = "channel_0";
             };
+
+            regulators {
+              vcm_reg: vcm-output {
+                regulator-name = "ad7768-1-vcm";
+              };
+            };
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
new file mode 100644
index 000000000000..ba3f7b2bd6cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7779.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7779.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD777X family 8-Channel, 24-Bit, Simultaneous Sampling ADCs
+
+maintainers:
+  - Ramona Nechita <ramona.nechita@analog.com>
+
+description: |
+  The AD777X family consist of 8-channel, simultaneous sampling analog-to-
+  digital converter (ADC). Eight full Σ-Δ ADCs are on-chip. The
+  AD7771 provides an ultralow input current to allow direct sensor
+  connection. Each input channel has a programmable gain stage
+  allowing gains of 1, 2, 4, and 8 to map lower amplitude sensor
+  outputs into the full-scale ADC input range, maximizing the
+  dynamic range of the signal chain.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7770.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7771.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7779.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7770
+      - adi,ad7771
+      - adi,ad7779
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  avdd1-supply:
+    description: Front-End analog supply AVDD1. Can be used as conversion ref.
+
+  avdd2-supply:
+    description: AVDD2 Analog Supply from 2.2 V to 3.6 V.
+
+  avdd4-supply:
+    description: AVDD4 SAR Analog Supply and Reference Source.
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: |
+          adc_rdy: Interrupt line for DRDY signal which indicates the end of
+          conversion independently of the interface selected to read back the
+          Σ-∆ conversion.
+      - description: |
+          Alert: The chip includes self diagnostic features to guarantee the
+          correct operation. If an error is detected, the ALERT pin is pulled
+          high to generate an external interruption to the controller.
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - adc_rdy
+        - alert
+
+  start-gpios:
+    description:
+      Pin that controls start synchronization pulse.
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  io-backends:
+    maxItems: 1
+
+  adi,num-lanes:
+    description:
+      Number of lanes on which the data is sent on the output when the data
+      output interface is used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4]
+    default: 4
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      not:
+        required:
+          - io-backends
+    then:
+      properties:
+        adi,num-lanes: false
+
+oneOf:
+  - required:
+      - interrupts
+  - required:
+      - io-backends
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad7779";
+          reg = <0>;
+          start-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>;
+          reset-gpios = <&gpio0 93 GPIO_ACTIVE_LOW>;
+          interrupt-parent = <&intc>;
+          interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "adc_rdy";
+          clocks = <&adc_clk>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+          compatible = "adi,ad7779";
+          reg = <0>;
+          start-gpios = <&gpio0 87 GPIO_ACTIVE_LOW>;
+          reset-gpios = <&gpio0 93 GPIO_ACTIVE_LOW>;
+          clocks = <&adc_clk>;
+          io-backends = <&iio_backend>;
+          adi,num-lanes = <4>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index a67ba67dab51..5c8df45bfab0 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -63,6 +63,17 @@ properties:
       marked GPIO_ACTIVE_LOW.
     maxItems: 1
 
+  rdy-gpios:
+    description:
+      GPIO reading the R̅D̅Y̅ line. Having such a GPIO is technically optional but
+      highly recommended because DOUT/R̅D̅Y̅ toggles during SPI transfers (in its
+      DOUT aka MISO role) and so usually triggers a spurious interrupt. The
+      distinction between such a spurious event and a real one can only be done
+      by reading such a GPIO. (There is a register telling the same
+      information, but accessing that one needs a SPI transfer which then
+      triggers another interrupt event.)
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -72,7 +83,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -80,9 +91,9 @@ examples:
             compatible = "adi,ad7780";
             reg = <0>;
 
-            avdd-supply      = <&vdd_supply>;
-            powerdown-gpios  = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-            adi,gain-gpios   = <&gpio1  5 GPIO_ACTIVE_LOW>;
+            avdd-supply = <&vdd_supply>;
+            powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+            adi,gain-gpios = <&gpio1  5 GPIO_ACTIVE_LOW>;
             adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
index e82194974eea..85148338c597 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
@@ -8,11 +8,10 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs.
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Patrick Vasseur <patrick.vasseur@c-s.fr>
 
 description: |
   Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
-   AD7918, AD7928 8 Channels ADCs.
+   AD7918, AD7927, AD7928 8 Channels ADCs.
 
   Specifications about the part can be found at:
     https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf
@@ -21,14 +20,22 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - adi,ad7904
-      - adi,ad7914
-      - adi,ad7923
-      - adi,ad7924
-      - adi,ad7908
-      - adi,ad7918
-      - adi,ad7928
+    oneOf:
+      - enum:
+          - adi,ad7904
+          - adi,ad7908
+          - adi,ad7914
+          - adi,ad7918
+          - adi,ad7923
+          - adi,ad7928
+      - const: adi,ad7924
+        deprecated: true
+      - items:
+          - const: adi,ad7924
+          - const: adi,ad7923
+      - items:
+          - const: adi,ad7927
+          - const: adi,ad7928
 
   reg:
     maxItems: 1
@@ -37,19 +44,24 @@ properties:
     description: |
       The regulator supply for ADC reference voltage.
 
+  adi,range-double:
+    description: Sets the analog input range from 0 to 2xVREF.
+    type: boolean
+
   '#address-cells':
     const: 1
 
   '#size-cells':
     const: 0
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml
new file mode 100644
index 000000000000..d17d184842d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7944.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7944.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices PulSAR LFCSP Analog to Digital Converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  A family of pin-compatible single channel differential analog to digital
+  converters with SPI support in a LFCSP package.
+
+  * https://www.analog.com/en/products/ad7944.html
+  * https://www.analog.com/en/products/ad7985.html
+  * https://www.analog.com/en/products/ad7986.html
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7944
+      - adi,ad7985
+      - adi,ad7986
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 111111111
+
+  spi-cpol: true
+  spi-cpha: true
+
+  adi,spi-mode:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ single, chain ]
+    description: |
+      This property indicates the SPI wiring configuration.
+
+      When this property is omitted, it is assumed that the device is using what
+      the datasheet calls "4-wire mode". This is the conventional SPI mode used
+      when there are multiple devices on the same bus. In this mode, the CNV
+      line is used to initiate the conversion and the SDI line is connected to
+      CS on the SPI controller.
+
+      When this property is present, it indicates that the device is using one
+      of the following alternative wiring configurations:
+
+      * single: The datasheet calls this "3-wire mode". (NOTE: The datasheet's
+        definition of 3-wire mode is NOT at all related to the standard
+        spi-3wire property!) This mode is often used when the ADC is the only
+        device on the bus. In this mode, SDI is tied to VIO, and the CNV line
+        can be connected to the CS line of the SPI controller or to a GPIO, in
+        which case the CS line of the controller is unused.
+      * chain: The datasheet calls this "chain mode". This mode is used to save
+        on wiring when multiple ADCs are used. In this mode, the SDI line of
+        one chip is tied to the SDO of the next chip in the chain and the SDI of
+        the last chip in the chain is tied to GND. Only the first chip in the
+        chain is connected to the SPI bus. The CNV line of all chips are tied
+        together. The CS line of the SPI controller can be used as the CNV line
+        only if it is active high.
+
+  '#daisy-chained-devices': true
+
+  avdd-supply:
+    description: A 2.5V supply that powers the analog circuitry.
+
+  dvdd-supply:
+    description: A 2.5V supply that powers the digital circuitry.
+
+  vio-supply:
+    description:
+      A 1.8V to 2.7V supply for the digital inputs and outputs.
+
+  bvdd-supply:
+    description:
+      A voltage supply for the buffered power. When using an external reference
+      without an internal buffer (PDREF high, REFIN low), this should be
+      connected to the same supply as ref-supply. Otherwise, when using an
+      internal reference or an external reference with an internal buffer, this
+      is connected to a 5V supply.
+
+  ref-supply:
+    description:
+      Voltage regulator for the external reference voltage (REF). This property
+      is omitted when using an internal reference.
+
+  refin-supply:
+    description:
+      Voltage regulator for the reference buffer input (REFIN). When using an
+      external buffer with internal reference, this should be connected to a
+      1.2V external reference voltage supply. Otherwise, this property is
+      omitted.
+
+  cnv-gpios:
+    description:
+      The Convert Input (CNV). This input has multiple functions. It initiates
+      the conversions and selects the SPI mode of the device (chain or CS). In
+      'single' mode, this property is omitted if the CNV pin is connected to the
+      CS line of the SPI controller.
+    maxItems: 1
+
+  turbo-gpios:
+    description:
+      GPIO connected to the TURBO line. If omitted, it is assumed that the TURBO
+      line is hard-wired and the state is determined by the adi,always-turbo
+      property.
+    maxItems: 1
+
+  adi,always-turbo:
+    type: boolean
+    description:
+      When present, this property indicates that the TURBO line is hard-wired
+      and the state is always high. If neither this property nor turbo-gpios is
+      present, the TURBO line is assumed to be hard-wired and the state is
+      always low.
+
+  interrupts:
+    description:
+      The SDO pin can also function as a busy indicator. This node should be
+      connected to an interrupt that is triggered when the SDO line goes low
+      while the SDI line is high and the CNV line is low ('single' mode) or the
+      SDI line is low and the CNV line is high ('multi' mode); or when the SDO
+      line goes high while the SDI and CNV lines are high (chain mode),
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+  - vio-supply
+  - bvdd-supply
+
+allOf:
+  # ref-supply and refin-supply are mutually exclusive (neither is also valid)
+  - if:
+      required:
+        - ref-supply
+    then:
+      properties:
+        refin-supply: false
+  - if:
+      required:
+        - refin-supply
+    then:
+      properties:
+        ref-supply: false
+  # in '4-wire' mode, cnv-gpios is required, for other modes it is optional
+  - if:
+      not:
+        required:
+          - adi,spi-mode
+    then:
+      required:
+        - cnv-gpios
+  # chain mode has lower SCLK max rate and doesn't work when TURBO is enabled
+  - if:
+      required:
+        - adi,spi-mode
+      properties:
+        adi,spi-mode:
+          const: chain
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 90909090
+        adi,always-turbo: false
+      required:
+        - '#daisy-chained-devices'
+    else:
+      properties:
+        '#daisy-chained-devices': false
+  # turbo-gpios and adi,always-turbo are mutually exclusive
+  - if:
+      required:
+        - turbo-gpios
+    then:
+      properties:
+        adi,always-turbo: false
+  - if:
+      required:
+        - adi,always-turbo
+    then:
+      properties:
+        turbo-gpios: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "adi,ad7944";
+            reg = <0>;
+            spi-cpha;
+            spi-max-frequency = <111111111>;
+            avdd-supply = <&supply_2_5V>;
+            dvdd-supply = <&supply_2_5V>;
+            vio-supply = <&supply_1_8V>;
+            bvdd-supply = <&supply_5V>;
+            cnv-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+            turbo-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
index 0b10ed5f74ae..238a8c9c4143 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -48,9 +48,6 @@ properties:
     enum: [2500000, 4096000]
     default: 4096000
 
-
-  spi-max-frequency: true
-
   '#io-channel-cells':
     const: 1
 
@@ -64,7 +61,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
index 29641ce7175b..433ed2c9295f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
@@ -57,17 +57,17 @@ additionalProperties: false
 examples:
   - |
     i2c {
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-       adc1: adc@28 {
-               reg = <0x28>;
-               compatible = "adi,ad7991";
-               interrupts = <13 2>;
-               interrupt-parent = <&gpio6>;
+        adc1: adc@28 {
+            reg = <0x28>;
+            compatible = "adi,ad7991";
+            interrupts = <13 2>;
+            interrupt-parent = <&gpio6>;
 
-               vcc-supply = <&vcc_3v3>;
-               vref-supply = <&adc_vref>;
+            vcc-supply = <&vcc_3v3>;
+            vref-supply = <&adc_vref>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
index b5aed40d8a50..2606c0c5dfc6 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -8,7 +8,6 @@ title: Analog Devices AD9467 and similar High-Speed ADCs
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
 
 description: |
   The AD9467 and the parts similar with it, are high-speed analog-to-digital
@@ -29,6 +28,9 @@ properties:
       - adi,ad9265
       - adi,ad9434
       - adi,ad9467
+      - adi,ad9643
+      - adi,ad9649
+      - adi,ad9652
 
   reg:
     maxItems: 1
@@ -45,6 +47,9 @@ properties:
       Pin that controls the powerdown mode of the device.
     maxItems: 1
 
+  io-backends:
+    maxItems: 1
+
   reset-gpios:
     description:
       Reset pin for the device.
@@ -65,10 +70,11 @@ examples:
         #size-cells = <0>;
 
         adc@0 {
-          compatible = "adi,ad9467";
-          reg = <0>;
-          clocks = <&adc_clk>;
-          clock-names = "adc-clk";
+            compatible = "adi,ad9467";
+            reg = <0>;
+            clocks = <&adc_clk>;
+            clock-names = "adc-clk";
+            io-backends = <&iio_backend>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
new file mode 100644
index 000000000000..f22eba0250ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2025 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ade9000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADE9000 High Performance, Polyphase Energy Metering
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  The ADE9000 is a highly accurate, fully integrated, multiphase energy and power
+  quality monitoring device. Superior analog performance and a digital signal
+  processing (DSP) core enable accurate energy monitoring over a wide dynamic
+  range. An integrated high end reference ensures low drift over temperature
+  with a combined drift of less than ±25 ppm/°C maximum for the entire channel
+  including a programmable gain amplifier (PGA) and an analog-to-digital
+  converter (ADC).
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADE9000.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,ade9000
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      enum: [irq0, irq1, dready]
+    minItems: 1
+    maxItems: 3
+
+  reset-gpios:
+    description:
+      Must be the device tree identifier of the RESET pin. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  vdd-supply: true
+
+  vref-supply: true
+
+  clocks:
+    description: External clock source when not using crystal
+    maxItems: 1
+
+  "#clock-cells":
+    description:
+      ADE9000 can provide clock output via CLKOUT pin with external buffer.
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+          compatible = "adi,ade9000";
+          reg = <0>;
+          spi-max-frequency = <7000000>;
+
+          #clock-cells = <0>;
+          reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+          interrupts = <2 IRQ_TYPE_EDGE_FALLING>, <3 IRQ_TYPE_EDGE_FALLING>, <4 IRQ_TYPE_EDGE_FALLING>;
+          interrupt-names = "irq0", "irq1", "dready";
+          interrupt-parent = <&gpio>;
+          clocks = <&ext_clock_24576khz>;
+          vdd-supply = <&vdd_reg>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index 0924b2b4972b..e91e421a3d6b 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -8,7 +8,6 @@ title: Analog Devices AXI ADC IP core
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
 
 description: |
   Analog Devices Generic AXI ADC IP core for interfacing an ADC device
@@ -18,17 +17,34 @@ description: |
   interface for the actual ADC, while this IP core will interface
   to the data-lines of the ADC and handle the streaming of data into
   memory via DMA.
+  In some cases, the AXI ADC interface is used to perform specialized
+  operation to a particular ADC, e.g access the physical bus through
+  specific registers to write ADC registers.
+  In this case, we use a different compatible which indicates the target
+  IP core's name.
+  The following IP is currently supported:
+    - AXI AD7606x: specialized version of the IP core for all the chips from
+      the ad7606 family.
 
   https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+  https://analogdevicesinc.github.io/hdl/library/axi_ad408x/index.html
+  https://analogdevicesinc.github.io/hdl/library/axi_ad485x/index.html
+  http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html
 
 properties:
   compatible:
     enum:
       - adi,axi-adc-10.0.a
+      - adi,axi-ad408x
+      - adi,axi-ad7606x
+      - adi,axi-ad485x
 
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   dmas:
     maxItems: 1
 
@@ -40,23 +56,85 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
       A reference to a the actual ADC to which this FPGA ADC interfaces to.
+    deprecated: true
+
+  '#io-backend-cells':
+    const: 0
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^adc@[0-9a-f]+$":
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+    additionalProperties: true
+    required:
+      - compatible
+      - reg
 
 required:
   - compatible
   - dmas
   - reg
-  - adi,adc-dev
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: adi,axi-ad7606x
+    then:
+      properties:
+        '#address-cells': false
+        '#size-cells': false
+      patternProperties:
+        "^adc@[0-9a-f]+$": false
 
 additionalProperties: false
 
 examples:
   - |
-    axi-adc@44a00000 {
-          compatible = "adi,axi-adc-10.0.a";
-          reg = <0x44a00000 0x10000>;
-          dmas = <&rx_dma 0>;
-          dma-names = "rx";
+    adc@44a00000 {
+        compatible = "adi,axi-adc-10.0.a";
+        reg = <0x44a00000 0x10000>;
+        dmas = <&rx_dma 0>;
+        dma-names = "rx";
+        clocks = <&axi_clk>;
+        #io-backend-cells = <0>;
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    parallel_bus_controller@44a00000 {
+        compatible = "adi,axi-ad7606x";
+        reg = <0x44a00000 0x10000>;
+        dmas = <&rx_dma 0>;
+        dma-names = "rx";
+        clocks = <&ext_clk>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-          adi,adc-dev = <&spi_adc>;
+        adc@0 {
+            compatible = "adi,ad7606b";
+            reg = <0>;
+            pwms = <&axi_pwm_gen 0 0>;
+            pwm-names = "convst1";
+            avcc-supply = <&adc_vref>;
+            vdrive-supply = <&vdd_supply>;
+            reset-gpios = <&gpio0 91 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>;
+            adi,range-gpios = <&gpio0 89 GPIO_ACTIVE_HIGH>;
+            adi,oversampling-ratio-gpios = <&gpio0 88 GPIO_ACTIVE_HIGH
+                            &gpio0 87 GPIO_ACTIVE_HIGH
+                            &gpio0 86 GPIO_ACTIVE_HIGH>;
+            io-backends = <&parallel_bus_controller>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml b/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
new file mode 100644
index 000000000000..53f9feff137b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,max11410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX11410 ADC device driver
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Bindings for the Analog Devices MAX11410 ADC device. Datasheet can be
+  found here:
+    https://datasheets.maximintegrated.com/en/ds/MAX11410.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max11410
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description: Name of the gpio pin of max11410 used for IRQ
+    minItems: 1
+    items:
+      - enum: [gpio0, gpio1]
+      - const: gpio1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  avdd-supply:
+    description: Optional avdd supply. Used as reference when no explicit reference supplied.
+
+  vref0p-supply:
+    description: vref0p supply can be used as reference for conversion.
+
+  vref1p-supply:
+    description: vref1p supply can be used as reference for conversion.
+
+  vref2p-supply:
+    description: vref2p supply can be used as reference for conversion.
+
+  vref0n-supply:
+    description: vref0n supply can be used as reference for conversion.
+
+  vref1n-supply:
+    description: vref1n supply can be used as reference for conversion.
+
+  vref2n-supply:
+    description: vref2n supply can be used as reference for conversion.
+
+  spi-max-frequency:
+    maximum: 8000000
+
+patternProperties:
+  "^channel(@[0-9])?$":
+    $ref: adc.yaml
+    type: object
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number in single-ended mode.
+        minimum: 0
+        maximum: 9
+
+      adi,reference:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          0: VREF0P/VREF0N
+          1: VREF1P/VREF1N
+          2: VREF2P/VREF2N
+          3: AVDD/AGND
+          4: VREF0P/AGND
+          5: VREF1P/AGND
+          6: VREF2P/AGND
+          If this field is left empty, AVDD/AGND is selected.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5, 6]
+        default: 3
+
+      adi,input-mode:
+        description: |
+          Select signal path of input channels. Valid values are:
+          0: Buffered, low-power, unity-gain path (default)
+          1: Bypass path
+          2: PGA path
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+
+      diff-channels: true
+
+      bipolar: true
+
+      settling-time-us: true
+
+      adi,buffered-vrefp:
+        description: Enable buffered mode for positive reference.
+        type: boolean
+
+      adi,buffered-vrefn:
+        description: Enable buffered mode for negative reference.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            reg = <0>;
+            compatible = "adi,max11410";
+            spi-max-frequency = <8000000>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "gpio1";
+
+            avdd-supply = <&adc_avdd>;
+
+            vref1p-supply = <&adc_vref1p>;
+            vref1n-supply = <&adc_vref1n>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                diff-channels = <2 3>;
+                adi,reference = <1>;
+                bipolar;
+                settling-time-us = <100000>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                diff-channels = <7 9>;
+                adi,reference = <5>;
+                adi,input-mode = <2>;
+                settling-time-us = <50000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml
new file mode 100644
index 000000000000..a2dc59c9dcd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023-2025 Analog Devices Inc.
+# Copyright 2023 Kim Seer Paller
+# Copyright 2025 Marilene Andrade Garcia
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,max14001.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX14001-MAX14002 ADC
+
+maintainers:
+  - Kim Seer Paller <kimseer.paller@analog.com>
+  - Marilene Andrade Garcia <marilene.agarcia@gmail.com>
+
+description: |
+    Single channel 10 bit ADC with SPI interface.
+    Datasheet can be found here
+      https://www.analog.com/media/en/technical-documentation/data-sheets/MAX14001-MAX14002.pdf
+
+$ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: adi,max14002
+      - items:
+          - const: adi,max14001
+          - const: adi,max14002
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  vdd-supply:
+    description:
+      Isolated DC-DC power supply input voltage.
+
+  vddl-supply:
+    description:
+      Logic power supply.
+
+  refin-supply:
+    description:
+      ADC voltage reference supply.
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: |
+          cout: comparator output signal that asserts high on the COUT pin
+          when ADC readings exceed the upper threshold and low when readings
+          fall below the lower threshold.
+      - description: |
+          fault: when fault reporting is enabled, the FAULT pin is asserted
+          low whenever one of the monitored fault conditions occurs.
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: cout
+      - const: fault
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddl-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,max14001", "adi,max14002";
+        reg = <0>;
+        spi-max-frequency = <5000000>;
+        spi-lsb-first;
+        vdd-supply = <&vdd>;
+        vddl-supply = <&vddl>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
new file mode 100644
index 000000000000..da605a051b94
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/allwinner,sun20i-d1-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner D1 General Purpose ADC
+
+maintainers:
+  - Maksim Kiselev <bigunclemax@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - allwinner,sun20i-d1-gpadc
+      - items:
+          - enum:
+              - allwinner,sun50i-h616-gpadc
+          - const: allwinner,sun20i-d1-gpadc
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-9a-f]+$":
+    $ref: adc.yaml
+    type: object
+    description:
+      Represents the internal channels of the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 0
+          maximum: 15
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - "#io-channel-cells"
+  - clocks
+  - compatible
+  - interrupts
+  - reg
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sun20i-d1-ccu.h>
+    #include <dt-bindings/reset/sun20i-d1-ccu.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpadc: adc@2009000 {
+        compatible = "allwinner,sun20i-d1-gpadc";
+        reg = <0x2009000 0x400>;
+        clocks = <&ccu CLK_BUS_GPADC>;
+        resets = <&ccu RST_BUS_GPADC>;
+        interrupts = <73 IRQ_TYPE_LEVEL_HIGH>;
+        #io-channel-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+            reg = <0>;
+        };
+
+        channel@1 {
+            reg = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
index 15c514b83583..a73a355fc665 100644
--- a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A33 Thermal Sensor Device Tree Bindings
+title: Allwinner A33 Thermal Sensor
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
index 7e8328e9ce13..bb9825e7346d 100644
--- a/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/amlogic,meson-saradc.yaml
@@ -23,6 +23,7 @@ properties:
               - amlogic,meson8m2-saradc
               - amlogic,meson-gxbb-saradc
               - amlogic,meson-gxl-saradc
+              - amlogic,meson-gxlx-saradc
               - amlogic,meson-gxm-saradc
               - amlogic,meson-axg-saradc
               - amlogic,meson-g12a-saradc
@@ -66,6 +67,9 @@ properties:
   nvmem-cell-names:
     const: temperature_calib
 
+  power-domains:
+    maxItems: 1
+
 allOf:
   - if:
       properties:
@@ -95,6 +99,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - amlogic,meson8-saradc
               - amlogic,meson8b-saradc
               - amlogic,meson8m2-saradc
     then:
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
index b283c8ca2bbf..509bfb1007c4 100644
--- a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
@@ -29,6 +29,8 @@ properties:
     enum:
       - aspeed,ast2600-adc0
       - aspeed,ast2600-adc1
+      - aspeed,ast2700-adc0
+      - aspeed,ast2700-adc1
     description:
       Their trimming data, which is used to calibrate internal reference volage,
       locates in different address of OTP.
@@ -62,13 +64,6 @@ properties:
     description:
       Inform the driver that last channel will be used to sensor battery.
 
-  aspeed,trim-data-valid:
-    type: boolean
-    description: |
-      The ADC reference voltage can be calibrated to obtain the trimming
-      data which will be stored in otp. This property informs the driver that
-      the data store in the otp is valid.
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
index efed361215b4..4817b840977a 100644
--- a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: AT91 SAMA5D2 Analog to Digital Converter (ADC)
 
 maintainers:
-  - Ludovic Desroches <ludovic.desroches@atmel.com>
   - Eugen Hristev <eugen.hristev@microchip.com>
 
 properties:
@@ -42,7 +41,7 @@ properties:
     description: Startup time expressed in ms, it depends on SoC.
 
   atmel,trigger-edge-type:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       One of possible edge types for the ADTRG hardware trigger pin.
       When the specific edge type is detected, the conversion will
@@ -72,7 +71,6 @@ required:
   - atmel,min-sample-rate-hz
   - atmel,max-sample-rate-hz
   - atmel,startup-time-ms
-  - atmel,trigger-edge-type
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml
index e6a1f915b542..1f30a8569187 100644
--- a/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama9260-adc.yaml
@@ -56,8 +56,8 @@ properties:
       String corresponding to an identifier from atmel,adc-res-names property.
       If not specified, the highest resolution will be used.
     enum:
-      - "lowres"
-      - "highres"
+      - lowres
+      - highres
 
   atmel,adc-sleep-mode:
     $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
index 77605f17901c..9c57eb13f892 100644
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AVIA HX711 ADC chip for weight cells
 
diff --git a/Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml
new file mode 100644
index 000000000000..6d4fb3e1d2a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/cirrus,ep9301-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP930x internal ADC
+
+description: |
+  Cirrus Logic EP9301/EP9302 SoCs' internal ADC block.
+
+  User's manual:
+  https://cdn.embeddedts.com/resource-attachments/ts-7000_ep9301-ug.pdf
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+properties:
+  compatible:
+    const: cirrus,ep9301-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    adc: adc@80900000 {
+        compatible = "cirrus,ep9301-adc";
+        reg = <0x80900000 0x28>;
+        clocks = <&syscon 24>;
+        interrupt-parent = <&vic1>;
+        interrupts = <30>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
index 4e695b97d015..9ea44ce63f25 100644
--- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
@@ -36,7 +36,6 @@ properties:
   "#io-channel-cells":
     const: 1
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
index 1ca571056ea9..c770ff4998f5 100644
--- a/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
@@ -7,14 +7,21 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ADC found on Freescale vf610 and similar SoCs
 
 maintainers:
-  - Fugang Duan <fugang.duan@nxp.com>
+  - Haibo Chen <haibo.chen@nxp.com>
 
 description:
   ADCs found on vf610/i.MX6slx and upward SoCs from Freescale.
 
 properties:
   compatible:
-    const: fsl,vf610-adc
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6sx-adc
+              - fsl,imx6ul-adc
+          - const: fsl,vf610-adc
+      - items:
+          - const: fsl,vf610-adc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/gehc,pmc-adc.yaml b/Documentation/devicetree/bindings/iio/adc/gehc,pmc-adc.yaml
new file mode 100644
index 000000000000..2cea7c104a26
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/gehc,pmc-adc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/gehc,pmc-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GE HealthCare PMC Analog to Digital Converter (ADC)
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The GE HealthCare PMC ADC is a 16-Channel (voltage and current), 16-Bit ADC
+  with an I2C Interface.
+
+properties:
+  compatible:
+    const: gehc,pmc-adc
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Regulator for the VDD power supply.
+
+  vdda-supply:
+    description:
+      Regulator for the VDD analog (VDDA) power supply.
+
+  vddio-supply:
+    description:
+      Regulator for the VDD IO (VDDIO) power supply.
+
+  vref-supply:
+    description:
+      Regulator for the voltage reference power supply.
+
+  clocks:
+    maxItems: 1
+    description:
+      The component uses an external oscillator (osc) if an external oscillator
+      is connected to its clock pins. Otherwise, it uses an internal reference
+      clock.
+
+  clock-names:
+    items:
+      - const: osc
+
+  "#io-channel-cells":
+    const: 2
+    description: |
+      The first cell is the channel type (dt-bindings/iio/adc/gehc,pmc-adc.h
+      defines these values):
+       - 0: voltage
+       - 1: current
+      The second cell is the channel number from 0 to 15.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vdda-supply
+  - vddio-supply
+  - vref-supply
+  - '#io-channel-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@14 {
+            compatible = "gehc,pmc-adc";
+            reg = <0x14>;
+            vdd-supply = <&reg_vdd>;
+            vdda-supply = <&reg_vdda>;
+            vddio-supply = <&reg_vddio>;
+            vref-supply = <&reg_vref>;
+            #io-channel-cells = <2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
index 52490cbb0af0..56bcbe5dcd79 100644
--- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
@@ -24,8 +24,6 @@ properties:
       GPIO used for controlling the reset pin
     maxItems: 1
 
-  spi-max-frequency: true
-
   "#io-channel-cells":
     const: 1
 
@@ -33,7 +31,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
index 698beb896f76..9cd0fd539782 100644
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -2,10 +2,10 @@
 # Copyright 2019-2020 Artur Rojek
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic JZ47xx ADC controller IIO bindings
+title: Ingenic JZ47xx ADC controller IIO
 
 maintainers:
   - Artur Rojek <contact@artur-rojek.eu>
@@ -78,14 +78,14 @@ examples:
     #include <dt-bindings/iio/adc/ingenic,adc.h>
 
     adc@10070000 {
-            compatible = "ingenic,jz4740-adc";
-            #io-channel-cells = <1>;
+        compatible = "ingenic,jz4740-adc";
+        #io-channel-cells = <1>;
 
-            reg = <0x10070000 0x30>;
+        reg = <0x10070000 0x30>;
 
-            clocks = <&cgu JZ4740_CLK_ADC>;
-            clock-names = "adc";
+        clocks = <&cgu JZ4740_CLK_ADC>;
+        clock-names = "adc";
 
-            interrupt-parent = <&intc>;
-            interrupts = <18>;
+        interrupt-parent = <&intc>;
+        interrupts = <18>;
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 0bd2fc0356c8..eac48166fe72 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -9,7 +9,6 @@ title: Linear Technology / Analog Devices LTC2496 ADC
 maintainers:
   - Lars-Peter Clausen <lars@metafoo.de>
   - Michael Hennerich <Michael.Hennerich@analog.com>
-  - Stefan Popa <stefan.popa@analog.com>
 
 properties:
   compatible:
@@ -22,15 +21,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency:
-    description: maximal spi bus frequency supported
-
 required:
   - compatible
   - vref-supply
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
index c1772b568cd1..5cc6a9684077 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
@@ -4,19 +4,33 @@
 $id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Linear Technology / Analog Devices LTC2497 ADC
+title: Linear Technology / Analog Devices LTC2497 and LTC2309 ADC
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
+  - Liam Beguin <liambeguin@gmail.com>
 
 description: |
-  16bit ADC supporting up to 16 single ended or 8 differential inputs.
-  I2C interface.
+  LTC2309:
+    low noise, low power, 8-channel, 12-bit successive approximation ADC with an
+    I2C compatible serial interface.
+
+    https://www.analog.com/media/en/technical-documentation/data-sheets/2309fd.pdf
+
+  LTC2497:
+  LTC2499:
+    16bit ADC supporting up to 16 single ended or 8 differential inputs.
+    I2C interface.
+
+    https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf
 
 properties:
   compatible:
-    const:
-      lltc,ltc2497
+    enum:
+      - lltc,ltc2309
+      - lltc,ltc2497
+      - lltc,ltc2499
 
   reg: true
   vref-supply: true
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
index 46b7747076b9..e4b362113509 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
@@ -45,14 +45,17 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
     spi {
-       #address-cells = <1>;
-       #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
         maxadc: adc@0 {
             compatible = "maxim,max1027";
             reg = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
index 0cf87556ef82..4f74cb33383a 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
@@ -26,13 +26,16 @@ properties:
     minimum: 100000
     maximum: 4800000
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vref-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
index e948b3e37b0c..bb336e33ebe2 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
@@ -28,23 +28,25 @@ properties:
   vref-supply:
     description: External reference, needed to establish input scaling
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: maxim,max1118
-then:
-  required:
-    - vref-supply
-else:
-  properties:
-    vref-supply: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max1118
+    then:
+      required:
+        - vref-supply
+    else:
+      properties:
+        vref-supply: false
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
new file mode 100644
index 000000000000..5f9e043cf5cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11205 ADC
+
+maintainers:
+  - Ramona Bolboaca <ramona.bolboaca@analog.com>
+
+description: |
+  The MAX11205 is an ultra-low-power (< 300FA max active current),
+  high-resolution, serial-output ADC.
+
+  https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max11205a
+      - maxim,max11205b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  spi-cpha: true
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage. This is a differential
+      reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-max-frequency
+  - spi-cpha
+  - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "maxim,max11205a";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            interrupt-parent = <&gpio>;
+            interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+            vref-supply = <&max11205_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
index 50bcd72ac9d6..ae3c89393f1a 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Jonathan Cameron <jic23@kernel.org>
 
 description: |
-  Family of simple ADCs with i2c inteface and internal references.
+  Family of simple ADCs with i2c interface and internal references.
 
 properties:
   compatible:
@@ -53,6 +53,9 @@ properties:
   reg:
     maxItems: 1
 
+  "#io-channel-cells":
+    const: 1
+
   vcc-supply: true
   vref-supply:
     description: Optional external reference.  If not supplied, internal
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index 4c7e0d94bff1..592854766583 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -39,22 +39,23 @@ properties:
       thus enabling power-down mode.
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vdd-supply
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     spi {
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
         adc@0 {
             compatible = "maxim,max1241";
@@ -62,6 +63,6 @@ examples:
             vdd-supply = <&adc_vdd>;
             vref-supply = <&adc_vref>;
             spi-max-frequency = <1000000>;
-            shutdown-gpios = <&gpio 26 1>;
+            shutdown-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
index e04f09f35601..96f3f535fe34 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Jonathan Cameron <jic23@kernel.org>
 
 description: |
-   Family of ADCs with i2c inteface, internal references and threshold
+   Family of ADCs with i2c interface, internal references and threshold
    monitoring.
 
 properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml
new file mode 100644
index 000000000000..4cba856e8d47
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max34408.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max34408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX34408/MAX34409 current monitors with overcurrent control
+
+maintainers:
+  - Ivan Mikhaylov <fr0st61te@gmail.com>
+
+description: |
+  The MAX34408/MAX34409 are two- and four-channel current monitors that are
+  configured and monitored with a standard I2C/SMBus serial interface. Each
+  unidirectional current sensor offers precision high-side operation with a
+  low full-scale sense voltage. The devices automatically sequence through
+  two or four channels and collect the current-sense samples and average them
+  to reduce the effect of impulse noise. The raw ADC samples are compared to
+  user-programmable digital thresholds to indicate overcurrent conditions.
+  Overcurrent conditions trigger a hardware output to provide an immediate
+  indication to shut down any necessary external circuitry.
+
+  Specifications about the devices can be found at:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max34408
+      - maxim,max34409
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      Shutdown Output. Open-drain output. This output transitions to high impedance
+      when any of the digital comparator thresholds are exceeded as long as the ENA
+      pin is high.
+    maxItems: 1
+
+  powerdown-status-gpios:
+    description:
+      SHTDN Enable Input. CMOS digital input. Connect to GND to clear the latch and
+      unconditionally deassert (force low) the SHTDN output and reset the shutdown
+      delay. Connect to VDD to enable normal latch operation of the SHTDN output.
+    maxItems: 1
+
+  vdd-supply: true
+
+patternProperties:
+  "^channel@[0-3]$":
+    $ref: adc.yaml
+    type: object
+    description:
+      Represents the internal channels of the ADC.
+
+    properties:
+      reg:
+        items:
+          - minimum: 0
+            maximum: 3
+
+      maxim,rsense-val-micro-ohms:
+        description:
+          Adjust the Rsense value to monitor higher or lower current levels for
+          input.
+        enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000]
+        default: 1000
+
+    required:
+      - reg
+      - maxim,rsense-val-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max34408
+    then:
+      patternProperties:
+        "^channel@[2-3]$": false
+        "^channel@[0-1]$":
+          properties:
+            reg:
+              maximum: 1
+    else:
+      patternProperties:
+        "^channel@[0-3]$":
+          properties:
+            reg:
+              maximum: 3
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1e {
+              compatible = "maxim,max34409";
+              reg = <0x1e>;
+              powerdown-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+              powerdown-status-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              channel@0 {
+                  reg = <0x0>;
+                  maxim,rsense-val-micro-ohms = <5000>;
+              };
+
+              channel@1 {
+                  reg = <0x1>;
+                  maxim,rsense-val-micro-ohms = <10000>;
+             };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
index b939f9652e3a..d9e825e5054f 100644
--- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -26,6 +26,7 @@ properties:
           - mediatek,mt2712-auxadc
           - mediatek,mt6765-auxadc
           - mediatek,mt7622-auxadc
+          - mediatek,mt7986-auxadc
           - mediatek,mt8173-auxadc
       - items:
           - enum:
@@ -33,7 +34,15 @@ properties:
           - const: mediatek,mt2701-auxadc
       - items:
           - enum:
+              - mediatek,mt7981-auxadc
+          - const: mediatek,mt7986-auxadc
+      - items:
+          - enum:
+              - mediatek,mt6893-auxadc
               - mediatek,mt8183-auxadc
+              - mediatek,mt8186-auxadc
+              - mediatek,mt8188-auxadc
+              - mediatek,mt8189-auxadc
               - mediatek,mt8195-auxadc
               - mediatek,mt8516-auxadc
           - const: mediatek,mt8173-auxadc
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt6359-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6359-auxadc.yaml
new file mode 100644
index 000000000000..5d4ab701f51a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt6359-auxadc.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/mediatek,mt6359-auxadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6350 series PMIC AUXADC
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
+  in some MediaTek PMICs, performing various PMIC related measurements
+  such as battery and PMIC internal voltage regulators temperatures,
+  accessory detection resistance (usually, for a 3.5mm audio jack)
+  other than voltages for various PMIC internal components.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6357-auxadc
+      - mediatek,mt6358-auxadc
+      - mediatek,mt6359-auxadc
+      - mediatek,mt6363-auxadc
+      - mediatek,mt6373-auxadc
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
index cbbac4ce56d6..18108f0f3731 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Oskar Andero <oskar.andero@gmail.com>
 
 description: |
-   Family of simple ADCs with an I2C inteface.
+   Family of simple ADCs with a SPI interface.
 
 properties:
   compatible:
@@ -32,7 +32,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
   spi-cpol: true
 
@@ -51,7 +50,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
new file mode 100644
index 000000000000..675319276197
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3564.yaml
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3564.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP346X and MCP356X ADC Family
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+  Bindings for the Microchip family of 153.6 ksps, Low-Noise 16/24-Bit
+  Delta-Sigma ADCs with an SPI interface. Datasheet can be found here:
+  Datasheet for MCP3561, MCP3562, MCP3564 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf
+  Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf
+  Datasheet for MCP3461, MCP3462, MCP3464 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf
+  Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3461
+      - microchip,mcp3462
+      - microchip,mcp3464
+      - microchip,mcp3461r
+      - microchip,mcp3462r
+      - microchip,mcp3464r
+      - microchip,mcp3561
+      - microchip,mcp3562
+      - microchip,mcp3564
+      - microchip,mcp3561r
+      - microchip,mcp3562r
+      - microchip,mcp3564r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  vdd-supply: true
+
+  avdd-supply: true
+
+  clocks:
+    description:
+      Phandle and clock identifier for external sampling clock.
+      If not specified, the internal crystal oscillator will be used.
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line of the ADC
+    maxItems: 1
+
+  drive-open-drain:
+    description:
+      Whether to drive the IRQ signal as push-pull (default) or open-drain. Note
+      that the device requires this pin to become "high", otherwise it will stop
+      converting.
+    type: boolean
+
+  vref-supply:
+    description:
+      Some devices have a specific reference voltage supplied on a different
+      pin to the other supplies. Needed to be able to establish channel scaling
+      unless there is also an internal reference available (e.g. mcp3564r). In
+      case of "r" devices (e. g. mcp3564r), if it does not exists the internal
+      reference will be used.
+
+  microchip,hw-device-address:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description:
+      The address is set on a per-device basis by fuses in the factory,
+      configured on request. If not requested, the fuses are set for 0x1.
+      The device address is part of the device markings to avoid
+      potential confusion. This address is coded on two bits, so four possible
+      addresses are available when multiple devices are present on the same
+      SPI bus with only one Chip Select line for all devices.
+      Each device communication starts by a CS falling edge, followed by the
+      clocking of the device address (BITS[7:6] - top two bits of COMMAND BYTE
+      which is first one on the wire).
+
+  "#io-channel-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@([0-9]|([1-7][0-9]))$":
+    $ref: adc.yaml
+    type: object
+    unevaluatedProperties: false
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number in single-ended and differential mode.
+        minimum: 0
+        maximum: 79
+
+    required:
+      - reg
+
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
+
+required:
+  - compatible
+  - reg
+  - microchip,hw-device-address
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - # External vref, no internal reference
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mcp3461
+              - microchip,mcp3462
+              - microchip,mcp3464
+              - microchip,mcp3561
+              - microchip,mcp3562
+              - microchip,mcp3564
+    then:
+      required:
+        - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "microchip,mcp3564r";
+            reg = <0>;
+            vref-supply = <&vref_reg>;
+            spi-cpha;
+            spi-cpol;
+            spi-max-frequency = <10000000>;
+            microchip,hw-device-address = <1>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                /* CH0 to AGND */
+                reg = <0>;
+                label = "CH0";
+            };
+
+            channel@1 {
+                /* CH1 to AGND */
+                reg = <1>;
+                label = "CH1";
+            };
+
+            /* diff-channels */
+            channel@11 {
+                reg = <11>;
+
+                /* CN0, CN1 */
+                diff-channels = <0 1>;
+                label = "CH0_CH1";
+            };
+
+            channel@22 {
+                reg = <0x22>;
+
+                /* CN1, CN2 */
+                diff-channels = <1 2>;
+                label = "CH1_CH3";
+            };
+
+            channel@23 {
+                reg = <0x23>;
+
+                /* CN1, CN3 */
+                diff-channels = <1 3>;
+                label = "CH1_CH3";
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 95ab285f4eba..3a69ec60edb9 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Microchip MCP3911 Dual channel analog front end (ADC)
 
@@ -18,7 +18,13 @@ description: |
 properties:
   compatible:
     enum:
+      - microchip,mcp3910
       - microchip,mcp3911
+      - microchip,mcp3912
+      - microchip,mcp3913
+      - microchip,mcp3914
+      - microchip,mcp3918
+      - microchip,mcp3919
 
   reg:
     maxItems: 1
@@ -26,6 +32,9 @@ properties:
   spi-max-frequency:
     maximum: 20000000
 
+  reset-gpios:
+    maxItems: 1
+
   clocks:
     description: |
       Phandle and clock identifier for external sampling clock.
@@ -36,6 +45,13 @@ properties:
     description: IRQ line of the ADC
     maxItems: 1
 
+  microchip,data-ready-hiz:
+    description:
+      Data Ready Pin Inactive State Control
+      true = The DR pin state is high-impedance
+      false = The DR pin state is logic high
+    type: boolean
+
   microchip,device-addr:
     description: Device address when multiple MCP3911 chips are present on the same SPI bus.
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -51,10 +67,14 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     spi {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -64,6 +84,7 @@ examples:
         reg = <0>;
         interrupt-parent = <&gpio5>;
         interrupts = <15 2>;
+        reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
         spi-max-frequency = <20000000>;
         microchip,device-addr = <0>;
         vref-supply = <&vref_reg>;
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1921.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1921.yaml
new file mode 100644
index 000000000000..12e56b1b3d3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1921.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1921.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1921 High-Side Power/Current Monitor with Anaog Output
+
+maintainers:
+  - Matteo Martelli <matteomartelli3@gmail.com>
+
+description: |
+  The PAC1921 is a power/current monitoring device with an analog output
+  and I2C/SMBus interface.
+
+  Datasheet can be found here:
+  https://ww1.microchip.com/downloads/en/DeviceDoc/PAC1921-Data-Sheet-DS20005293E.pdf
+
+properties:
+  compatible:
+    const: microchip,pac1921
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  "#io-channel-cells":
+    const: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Value in micro Ohms of the shunt resistor connected between
+      the SENSE+ and SENSE- inputs, across which the current is measured.
+      Value is needed to compute the scaling of the measured current.
+
+  label:
+    description: Unique name to identify which device this is.
+
+  read-integrate-gpios:
+    description:
+      READ/INT input pin to control the current state of the device, either in
+      the INTEGRATE state when driven high, or in the READ state when driven low.
+      When not connected the pin is floating and it can be overridden by the
+      INT_EN register bit after asserting the READ/INT_OVR register bit.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - shunt-resistor-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@4c {
+            compatible = "microchip,pac1921";
+            reg = <0x4c>;
+            vdd-supply = <&vdd>;
+            #io-channel-cells = <1>;
+            label = "vbat";
+            shunt-resistor-micro-ohms = <10000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
new file mode 100644
index 000000000000..47a11a9ac95e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,pac1934.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PAC1934 Power Monitors with Accumulator
+
+maintainers:
+  - Marius Cristea <marius.cristea@microchip.com>
+
+description: |
+  This device is part of the Microchip family of Power Monitors with
+  Accumulator.
+  The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf
+
+properties:
+  compatible:
+    enum:
+      - microchip,pac1931
+      - microchip,pac1932
+      - microchip,pac1933
+      - microchip,pac1934
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  slow-io-gpios:
+    description:
+      A GPIO used to trigger a change is sampling rate (lowering the chip power
+      consumption). If configured in SLOW mode, if this pin is forced high,
+      sampling rate is forced to eight samples/second. When it is forced low,
+      the sampling rate is 1024 samples/second unless a different sample rate
+      has been programmed.
+
+patternProperties:
+  "^channel@[1-4]+$":
+    type: object
+    $ref: adc.yaml
+    description:
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        items:
+          minimum: 1
+          maximum: 4
+
+      shunt-resistor-micro-ohms:
+        description:
+          Value in micro Ohms of the shunt resistor connected between
+          the SENSE+ and SENSE- inputs, across which the current is measured.
+          Value is needed to compute the scaling of the measured current.
+
+    required:
+      - reg
+      - shunt-resistor-micro-ohms
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@10 {
+            compatible = "microchip,pac1934";
+            reg = <0x10>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <24900000>;
+                label = "CPU";
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                shunt-resistor-micro-ohms = <49900000>;
+                label = "GPU";
+            };
+
+            channel@3 {
+                reg = <0x3>;
+                shunt-resistor-micro-ohms = <75000000>;
+                label = "MEM";
+                bipolar;
+            };
+
+            channel@4 {
+                reg = <0x4>;
+                shunt-resistor-micro-ohms = <100000000>;
+                label = "NET";
+                bipolar;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
index a6cb857a232d..9ceb6f18c854 100644
--- a/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/motorola,cpcap-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Motorola CPCAP PMIC ADC binding
+title: Motorola CPCAP PMIC ADC
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml
new file mode 100644
index 000000000000..8ce7d415d956
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,nct7201.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nuvoton,nct7201.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton nct7201 and similar ADCs
+
+maintainers:
+  - Eason Yang <j2anfernee@gmail.com>
+
+description: |
+  The NCT7201/NCT7202 is a Nuvoton Hardware Monitor IC, contains up to 12
+  voltage monitoring channels, with SMBus interface, and up to 4 sets SMBus
+  address selection by ADDR connection. It also provides ALERT# signal for
+  event notification and reset input RSTIN# to recover it from a fault
+  condition.
+
+  NCT7201 contains 8 voltage monitor inputs (VIN1~VIN8).
+  NCT7202 contains 12 voltage monitor inputs (VIN1~VIN12).
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct7201
+      - nuvoton,nct7202
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      A 3.3V to supply that powers the chip.
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage.
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1d {
+            compatible = "nuvoton,nct7202";
+            reg = <0x1d>;
+            vdd-supply = <&vdd>;
+            vref-supply = <&vref>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
index 001cf263b7d5..fede2aa64092 100644
--- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
@@ -10,11 +10,14 @@ maintainers:
   - Tomer Maimon <tmaimon77@gmail.com>
 
 description:
-  The NPCM ADC is a 10-bit converter for eight channel inputs.
+  The NPCM7XX ADC is a 10-bit converter and NPCM8XX ADC is a 12-bit converter,
+  both have eight channel inputs.
 
 properties:
   compatible:
-    const: nuvoton,npcm750-adc
+    enum:
+      - nuvoton,npcm750-adc
+      - nuvoton,npcm845-adc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
index 9c59a20a6032..0a192ca192c5 100644
--- a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/nxp,imx8qxp-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP IMX8QXP ADC bindings
+title: NXP IMX8QXP ADC
 
 maintainers:
   - Cai Huoqing <caihuoqing@baidu.com>
@@ -39,6 +39,12 @@ properties:
   power-domains:
     maxItems: 1
 
+  vref-supply:
+    description: |
+      External ADC reference voltage supply on VREFH pad. If VERID[MVI] is
+      set, there are additional, internal reference voltages selectable.
+      VREFH1 is always from VREFH pad.
+
   "#io-channel-cells":
     const: 1
 
@@ -72,6 +78,7 @@ examples:
             assigned-clocks = <&clk IMX_SC_R_ADC_0>;
             assigned-clock-rates = <24000000>;
             power-domains = <&pd IMX_SC_R_ADC_0>;
+            vref-supply = <&reg_1v8>;
             #io-channel-cells = <1>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
new file mode 100644
index 000000000000..c2e5ff418920
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,imx93-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX93 ADC
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+
+description:
+  The ADC on iMX93 is a 8-channel 12-bit 1MS/s ADC with 4 channels
+  connected to pins. it support normal and inject mode, include
+  One-Shot and Scan (continuous) conversions. Programmable DMA
+  enables for each channel  Also this ADC contain alternate analog
+  watchdog thresholds, select threshold through input ports. And
+  also has Self-test logic and Software-initiated calibration.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nxp,imx93-adc
+      - items:
+          - enum:
+              - nxp,imx94-adc
+              - nxp,imx95-adc
+          - const: nxp,imx93-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: WDGnL, watchdog threshold interrupt requests.
+      - description: WDGnH, watchdog threshold interrupt requests.
+      - description: normal conversion, include EOC (End of Conversion),
+          ECH (End of Chain), JEOC (End of Injected Conversion) and
+          JECH (End of injected Chain).
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+  vref-supply:
+    description:
+      The reference voltage which used to establish channel scaling.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@44530000 {
+            compatible = "nxp,imx93-adc";
+            reg = <0x44530000 0x10000>;
+            interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX93_CLK_ADC1_GATE>;
+            clock-names = "ipg";
+            vref-supply = <&reg_vref_1v8>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
index 6404fb73f8ed..70b38038a080 100644
--- a/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/iio/adc/nxp,lpc1850-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP LPC1850 ADC bindings
+title: NXP LPC1850 ADC
 
 maintainers:
-  - Joachim Eastwood <manabian@gmail.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description:
   Supports the ADC found on the LPC1850 SoC.
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml
index 2c5032be83bd..fd815ab30df1 100644
--- a/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc3220-adc.yaml
@@ -22,6 +22,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
   vref-supply: true
 
   "#io-channel-cells":
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
index d186b713d6a7..58ea1ca4a5ee 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
@@ -160,7 +160,7 @@ examples:
             };
             ref_muxoff: adc-channel@f {
                 reg = <0x00 0x0f>;
-           };
+            };
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
index 27e3108661c0..5ed893ef5c18 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -18,10 +18,14 @@ description: |
 
 properties:
   compatible:
-    const: qcom,spmi-iadc
+    items:
+      - enum:
+          - qcom,pm8226-iadc
+          - qcom,pm8941-iadc
+      - const: qcom,spmi-iadc
 
   reg:
-    description: IADC base address and length in the SPMI PMIC register map
+    description: IADC base address in the SPMI PMIC register map
     maxItems: 1
 
   qcom,external-resistor-micro-ohms:
@@ -46,15 +50,17 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
-        pmic_iadc: adc@3600 {
-            compatible = "qcom,spmi-iadc";
-            reg = <0x3600 0x100>;
+
+        adc@3600 {
+            compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
+            reg = <0x3600>;
             interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
             qcom,external-resistor-micro-ohms = <10000>;
-            #io-channel-cells  = <1>;
+            #io-channel-cells = <1>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
new file mode 100644
index 000000000000..862e450da214
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-rradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC Round Robin ADC
+
+maintainers:
+  - Casey Connolly <casey.connolly@linaro.org>
+
+description: |
+  The Qualcomm SPMI Round Robin ADC (RRADC) provides interface to clients to
+  read the voltage, current and temperature for supported peripherals such as
+  the battery thermistor die temperature, charger temperature, USB and DC input
+  voltage / current and battery ID resistor.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pmi8998-rradc
+      - qcom,pm660-rradc
+
+  reg:
+    maxItems: 1
+
+  qcom,batt-id-delay-ms:
+    description: Sets the hardware settling time for the battery ID resistor.
+    enum: [0, 1, 4, 12, 20, 40, 60, 80]
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@4500 {
+            compatible = "qcom,pmi8998-rradc";
+            reg = <0x4500>;
+            #io-channel-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index 74a4a9d95798..b9dc04b0d307 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -22,13 +22,11 @@ properties:
       - items:
           - const: qcom,pms405-adc
           - const: qcom,spmi-adc-rev2
-
-      - items:
-          - enum:
-              - qcom,spmi-vadc
-              - qcom,spmi-adc5
-              - qcom,spmi-adc-rev2
-              - qcom,spmi-adc7
+      - enum:
+          - qcom,spmi-vadc
+          - qcom,spmi-adc5
+          - qcom,spmi-adc-rev2
+          - qcom,spmi-adc7
 
   reg:
     description: VADC base address in the SPMI PMIC register map
@@ -56,8 +54,9 @@ required:
   - '#io-channel-cells'
 
 patternProperties:
-  "^.*@[0-9a-f]+$":
+  "^channel@[0-9a-f]+$":
     type: object
+    additionalProperties: false
     description: |
       Represents the external channels which are connected to the ADC.
       For compatible property "qcom,spmi-vadc" following channels, also known as
@@ -76,7 +75,6 @@ patternProperties:
           in the PMIC-specific files in include/dt-bindings/iio/.
 
       label:
-        $ref: /schemas/types.yaml#/definitions/string
         description: |
             ADC input of the platform as seen in the schematics.
             For thermistor inputs connected to generic AMUX or GPIO inputs
@@ -102,7 +100,7 @@ patternProperties:
         oneOf:
           - items:
               - const: 1
-              - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
+              - enum: [ 1, 3, 4, 6, 20, 8, 10, 16 ]
           - items:
               - const: 10
               - const: 81
@@ -149,7 +147,7 @@ allOf:
 
     then:
       patternProperties:
-        "^.*@[0-9a-f]+$":
+        "^channel@[0-9a-f]+$":
           properties:
             qcom,decimation:
               enum: [ 512, 1024, 2048, 4096 ]
@@ -172,7 +170,7 @@ allOf:
 
     then:
       patternProperties:
-        "^.*@[0-9a-f]+$":
+        "^channel@[0-9a-f]+$":
           properties:
             qcom,decimation:
               enum: [ 256, 512, 1024 ]
@@ -195,7 +193,7 @@ allOf:
 
     then:
       patternProperties:
-        "^.*@[0-9a-f]+$":
+        "^channel@[0-9a-f]+$":
           properties:
             qcom,decimation:
               enum: [ 250, 420, 840 ]
@@ -218,7 +216,7 @@ allOf:
 
     then:
       patternProperties:
-        "^.*@[0-9a-f]+$":
+        "^channel@[0-9a-f]+$":
           properties:
             qcom,decimation:
               enum: [ 85, 340, 1360 ]
@@ -237,42 +235,74 @@ additionalProperties: false
 
 examples:
   - |
-    spmi_bus {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      /* VADC node */
-      pmic_vadc: adc@3100 {
-        compatible = "qcom,spmi-vadc";
-        reg = <0x3100>;
-        interrupts = <0x0 0x31 0x0 0x1>;
+    pmic {
         #address-cells = <1>;
         #size-cells = <0>;
-        #io-channel-cells = <1>;
-
-        /* Channel node */
-        adc-chan@39 {
-          reg = <0x39>;
-          qcom,decimation = <512>;
-          qcom,ratiometric;
-          qcom,hw-settle-time = <200>;
-          qcom,avg-samples = <1>;
-          qcom,pre-scaling = <1 3>;
-        };
 
-        adc-chan@9 {
-          reg = <0x9>;
+        adc@3100 {
+            compatible = "qcom,spmi-vadc";
+            reg = <0x3100>;
+            interrupts = <0x0 0x31 0x0 0x1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Channel node */
+            channel@39 {
+                reg = <0x39>;
+                qcom,decimation = <512>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                qcom,avg-samples = <1>;
+                qcom,pre-scaling = <1 3>;
+            };
+
+            channel@9 {
+                reg = <0x9>;
+            };
+
+            channel@a {
+                reg = <0xa>;
+            };
+
+            channel@e {
+                reg = <0xe>;
+            };
+
+            channel@f {
+                reg = <0xf>;
+            };
         };
+    };
 
-        adc-chan@a {
-          reg = <0xa>;
-        };
+  - |
+    #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+    #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
 
-        adc-chan@e {
-          reg = <0xe>;
-        };
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-        adc-chan@f {
-          reg = <0xf>;
+        adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc7";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            channel@44 {
+                reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                label = "xo_therm";
+            };
+
+            channel@47 {
+                reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                label = "conn_therm";
+            };
         };
-      };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
new file mode 100644
index 000000000000..dc0206b28231
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/renesas,r9a09g077-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/T2H / RZ/N2H ADC12
+
+maintainers:
+  - Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
+
+description: |
+  A/D Converter block is a successive approximation analog-to-digital converter
+  with a 12-bit accuracy. Up to 16 analog input channels can be selected.
+  Conversions can be performed in single or continuous mode. Result of the ADC
+  is stored in a 16-bit data register corresponding to each channel.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: renesas,r9a09g087-adc # RZ/N2H
+          - const: renesas,r9a09g077-adc # RZ/T2H
+      - items:
+          - const: renesas,r9a09g077-adc # RZ/T2H
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: A/D scan end interrupt
+      - description: A/D scan end interrupt for Group B
+      - description: A/D scan end interrupt for Group C
+      - description: Window A compare match
+      - description: Window B compare match
+      - description: Compare match
+      - description: Compare mismatch
+
+  interrupt-names:
+    items:
+      - const: adi
+      - const: gbadi
+      - const: gcadi
+      - const: cmpai
+      - const: cmpbi
+      - const: wcmpm
+      - const: wcmpum
+
+  clocks:
+    items:
+      - description: Converter clock
+      - description: Peripheral clock
+
+  clock-names:
+    items:
+      - const: adclk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+patternProperties:
+  "^channel@[0-9a-f]$":
+    $ref: adc.yaml
+    type: object
+    description: The external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number.
+        maximum: 15
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    adc@80008000 {
+      compatible = "renesas,r9a09g077-adc";
+      reg = <0x80008000 0x400>;
+      interrupts = <GIC_SPI 708 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 709 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 710 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 855 IRQ_TYPE_EDGE_RISING>,
+                   <GIC_SPI 856 IRQ_TYPE_EDGE_RISING>;
+      interrupt-names = "adi", "gbadi", "gcadi",
+                        "cmpai", "cmpbi", "wcmpm", "wcmpum";
+      clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>,
+               <&cpg CPG_MOD 225>;
+      clock-names = "adclk", "pclk";
+      power-domains = <&cpg>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #io-channel-cells = <1>;
+
+      channel@0 {
+        reg = <0x0>;
+      };
+      channel@1 {
+        reg = <0x1>;
+      };
+      channel@2 {
+        reg = <0x2>;
+      };
+      channel@3 {
+        reg = <0x3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
index c115e2e99bd9..36dff3250ea7 100644
--- a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
@@ -34,9 +34,11 @@ properties:
   clock-names:
     const: fck
 
-  power-domains: true
+  power-domains:
+    maxItems: 1
 
-  resets: true
+  resets:
+    maxItems: 1
 
   "#address-cells":
     const: 1
@@ -51,6 +53,8 @@ required:
   - reg
   - clocks
   - clock-names
+  - power-domains
+  - resets
   - "#address-cells"
   - "#size-cells"
 
@@ -86,7 +90,7 @@ patternProperties:
             of the MAX chips to the GyroADC, while MISO line of each Maxim
             ADC connects to a shared input pin of the GyroADC.
         enum:
-          - adi,7476
+          - adi,ad7476
           - fujitsu,mb88101a
           - maxim,max1162
           - maxim,max11100
@@ -108,36 +112,30 @@ patternProperties:
 
 examples:
   - |
-    #include <dt-bindings/clock/r8a7791-clock.h>
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
     #include <dt-bindings/power/r8a7791-sysc.h>
-    soc {
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        adc@e6e54000 {
-            compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
-            reg = <0 0xe6e54000 0 64>;
-            clocks = <&mstp9_clks R8A7791_CLK_GYROADC>;
-            clock-names = "fck";
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-            pinctrl-0 = <&adc_pins>;
-            pinctrl-names = "default";
-
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            adc@0 {
-                reg = <0>;
-                compatible = "maxim,max1162";
-                vref-supply = <&vref_max1162>;
-            };
-
-            adc@1 {
-                reg = <1>;
-                compatible = "maxim,max1162";
-                vref-supply = <&vref_max1162>;
-            };
+
+    adc@e6e54000 {
+        compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
+        reg = <0xe6e54000 64>;
+        clocks = <&cpg CPG_MOD 901>;
+        clock-names = "fck";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 901>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            reg = <0>;
+            compatible = "maxim,max1162";
+            vref-supply = <&vref_max1162>;
+        };
+
+        adc@1 {
+            reg = <1>;
+            compatible = "maxim,max1162";
+            vref-supply = <&vref_max1162>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
index c80201d6a716..40341d541726 100644
--- a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
@@ -17,10 +17,15 @@ description: |
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r9a07g044-adc   # RZ/G2{L,LC}
-      - const: renesas,rzg2l-adc
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-adc   # RZ/G2UL and RZ/Five
+              - renesas,r9a07g044-adc   # RZ/G2L
+              - renesas,r9a07g054-adc   # RZ/V2L
+          - const: renesas,rzg2l-adc
+      - items:
+          - const: renesas,r9a08g045-adc  # RZ/G3S
 
   reg:
     maxItems: 1
@@ -55,6 +60,9 @@ properties:
   '#size-cells':
     const: 0
 
+  "#io-channel-cells":
+    const: 1
+
 required:
   - compatible
   - reg
@@ -66,8 +74,8 @@ required:
   - reset-names
 
 patternProperties:
-  "^channel@[0-7]$":
-    $ref: "adc.yaml"
+  "^channel@[0-8]$":
+    $ref: adc.yaml
     type: object
     description: |
       Represents the external channels which are connected to the ADC.
@@ -75,16 +83,44 @@ patternProperties:
     properties:
       reg:
         description: |
-          The channel number. It can have up to 8 channels numbered from 0 to 7.
-        items:
-          - minimum: 0
-            maximum: 7
+          The channel number.
+        minimum: 0
+        maximum: 8
 
     required:
       - reg
 
     additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-adc
+    then:
+      patternProperties:
+        "^channel@[2-8]$": false
+        "^channel@[0-1]$":
+          properties:
+            reg:
+              maximum: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g044-adc
+              - renesas,r9a07g054-adc
+    then:
+      patternProperties:
+        "^channel@[8]$": false
+        "^channel@[0-7]$":
+          properties:
+            reg:
+              maximum: 7
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml
new file mode 100644
index 000000000000..1a40352165fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/renesas,rzn1-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The Renesas RZ/N1 ADC controller available in the Renesas RZ/N1 SoCs family
+  can use up to two internal ADC cores (ADC1 and ADC2) those internal cores are
+  handled through ADC controller virtual channels.
+
+properties:
+  compatible:
+    items:
+      - const: renesas,r9a06g032-adc   # RZ/N1D
+      - const: renesas,rzn1-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB internal bus clock
+      - description: ADC clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: adc
+
+  power-domains:
+    maxItems: 1
+
+  adc1-avdd-supply:
+    description:
+      ADC1 analog power supply.
+
+  adc1-vref-supply:
+    description:
+      ADC1 reference voltage supply.
+
+  adc2-avdd-supply:
+    description:
+      ADC2 analog power supply.
+
+  adc2-vref-supply:
+    description:
+      ADC2 reference voltage supply.
+
+  '#io-channel-cells':
+    const: 1
+    description: |
+      Channels numbers available:
+        if ADC1 is used (i.e. adc1-{avdd,vref}-supply present):
+          - 0: ADC1 IN0
+          - 1: ADC1 IN1
+          - 2: ADC1 IN2
+          - 3: ADC1 IN3
+          - 4: ADC1 IN4
+          - 5: ADC1 IN6
+          - 6: ADC1 IN7
+          - 7: ADC1 IN8
+        if ADC2 is used (i.e. adc2-{avdd,vref}-supply present):
+          - 8: ADC2 IN0
+          - 9: ADC2 IN1
+          - 10: ADC2 IN2
+          - 11: ADC2 IN3
+          - 12: ADC2 IN4
+          - 13: ADC2 IN6
+          - 14: ADC2 IN7
+          - 15: ADC2 IN8
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - '#io-channel-cells'
+
+# At least one of avvd/vref supplies
+anyOf:
+  - required:
+      - adc1-vref-supply
+      - adc1-avdd-supply
+  - required:
+      - adc2-vref-supply
+      - adc2-avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    adc: adc@40065000 {
+      compatible = "renesas,r9a06g032-adc", "renesas,rzn1-adc";
+      reg = <0x40065000 0x200>;
+      clocks = <&sysctrl R9A06G032_HCLK_ADC>, <&sysctrl R9A06G032_CLK_ADC>;
+      clock-names = "pclk", "adc";
+      power-domains = <&sysctrl>;
+      adc1-avdd-supply = <&adc1_avdd>;
+      adc1-vref-supply = <&adc1_vref>;
+      #io-channel-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
new file mode 100644
index 000000000000..af2c3a67f888
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+  interface, and the device provides full information for system by reading
+  out the loading current and power.
+
+  The device monitors both of the drops across sense resistor and the BUS
+  voltage, converts into the current in amperes, and power in watts through
+  internal analog-to-digital converter ADC. The programmable calibration,
+  adjustable conversion time, and averaging function are also built in for
+  more design flexibility.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - richtek,rtq6056
+          - richtek,rtq6059
+      - items:
+          - enum:
+              - richtek,rtq6053
+          - const: richtek,rtq6056
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  shunt-resistor-micro-ohms:
+    description: Shunt IN+/IN- sensing node resistor
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      adc@40 {
+        compatible = "richtek,rtq6056";
+        reg = <0x40>;
+        #io-channel-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
index e512a14e41b4..6769d679c907 100644
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
@@ -15,6 +15,15 @@ properties:
       - const: rockchip,saradc
       - const: rockchip,rk3066-tsadc
       - const: rockchip,rk3399-saradc
+      - const: rockchip,rk3528-saradc
+      - items:
+          - const: rockchip,rk3506-saradc
+          - const: rockchip,rk3528-saradc
+      - const: rockchip,rk3562-saradc
+      - const: rockchip,rk3588-saradc
+      - items:
+          - const: rockchip,rk3576-saradc
+          - const: rockchip,rk3588-saradc
       - items:
           - enum:
               - rockchip,px30-saradc
@@ -22,6 +31,7 @@ properties:
               - rockchip,rk3328-saradc
               - rockchip,rk3568-saradc
               - rockchip,rv1108-saradc
+              - rockchip,rv1126-saradc
           - const: rockchip,rk3399-saradc
 
   reg:
@@ -40,6 +50,9 @@ properties:
       - const: saradc
       - const: apb_pclk
 
+  power-domains:
+    maxItems: 1
+
   resets:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/iio/adc/rohm,bd79104.yaml b/Documentation/devicetree/bindings/iio/adc/rohm,bd79104.yaml
new file mode 100644
index 000000000000..d5192ec58f59
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/rohm,bd79104.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/rohm,bd79104.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM Semiconductor BD79104 ADC
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  12 bit SPI ADC with 8 channels.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - rohm,bd79100
+          - rohm,bd79101
+          - rohm,bd79102
+          - rohm,bd79104
+      - items:
+          - const: rohm,bd79103
+          - const: rohm,bd79104
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  iovdd-supply: true
+
+# The component data-sheet says the frequency is 20M. I, however, found
+# that the ROHM evaluation board BD79104FV-EVK-001 had problems with 20M.
+# I have successfully used it with 4M. My _assumption_ is that this is not
+# the limitation of the component itself, but a limitation of the EVK.
+  spi-max-frequency:
+    maximum: 20000000
+
+  "#io-channel-cells":
+    const: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - iovdd-supply
+  - spi-cpha
+  - spi-cpol
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "rohm,bd79104";
+            reg = <0>;
+            vdd-supply = <&vdd_supply>;
+            iovdd-supply = <&iovdd_supply>;
+            spi-max-frequency = <4000000>;
+            spi-cpha;
+            spi-cpol;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/rohm,bd79112.yaml b/Documentation/devicetree/bindings/iio/adc/rohm,bd79112.yaml
new file mode 100644
index 000000000000..aa8b07c3fac1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/rohm,bd79112.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/rohm,bd79112.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD79112 ADC/GPO
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  The ROHM BD79112 is a 12-bit, 32-channel, SAR ADC. ADC input pins can be
+  also configured as general purpose inputs/outputs. SPI should use MODE 3.
+
+properties:
+  compatible:
+    const: rohm,bd79112
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+  gpio-controller: true
+  "#gpio-cells":
+    const: 2
+
+  vdd-supply: true
+
+  iovdd-supply: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@([0-9]|[12][0-9]|3[01])$":
+    type: object
+    $ref: /schemas/iio/adc/adc.yaml#
+    description: Represents ADC channel. Omitted channels' inputs are GPIOs.
+
+    properties:
+      reg:
+        description: AIN pin number
+        minimum: 0
+        maximum: 31
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - iovdd-supply
+  - vdd-supply
+  - spi-cpha
+  - spi-cpol
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc: adc@0 {
+            compatible = "rohm,bd79112";
+            reg = <0x0>;
+
+            spi-cpha;
+            spi-cpol;
+
+            vdd-supply = <&dummyreg>;
+            iovdd-supply = <&dummyreg>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            channel@0 {
+                reg = <0>;
+            };
+            channel@1 {
+                reg = <1>;
+            };
+            channel@2 {
+                reg = <2>;
+            };
+            channel@16 {
+                reg = <16>;
+            };
+            channel@20 {
+                reg = <20>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml b/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml
new file mode 100644
index 000000000000..4a8f127de7e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/rohm,bd79124.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/rohm,bd79124.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD79124 ADC/GPO
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  The ROHM BD79124 is a 12-bit, 8-channel, SAR ADC. The ADC supports
+  an automatic measurement mode, with an alarm interrupt for out-of-window
+  measurements. ADC input pins can be also configured as general purpose
+  outputs.
+
+properties:
+  compatible:
+    const: rohm,bd79124
+
+  reg:
+    description:
+      I2C slave address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 1
+    description:
+      The pin number.
+
+  vdd-supply: true
+
+  iovdd-supply: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@[0-7]+$":
+    type: object
+    $ref: /schemas/iio/adc/adc.yaml#
+    description: Represents ADC channel.
+
+    properties:
+      reg:
+        description: AIN pin number
+        minimum: 0
+        maximum: 7
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - iovdd-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc: adc@10 {
+            compatible = "rohm,bd79124";
+            reg = <0x10>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+            vdd-supply = <&dummyreg>;
+            iovdd-supply = <&dummyreg>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+            };
+            channel@1 {
+                reg = <1>;
+            };
+            channel@2 {
+                reg = <2>;
+            };
+            channel@3 {
+                reg = <3>;
+            };
+            channel@4 {
+                reg = <4>;
+            };
+            channel@5 {
+                reg = <5>;
+            };
+            channel@6 {
+                reg = <6>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index 81c87295912c..def879f6ed20 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -11,18 +11,19 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - samsung,exynos-adc-v1                 # Exynos5250
-      - samsung,exynos-adc-v2
-      - samsung,exynos3250-adc
-      - samsung,exynos4212-adc                # Exynos4212 and Exynos4412
-      - samsung,exynos7-adc
-      - samsung,s3c2410-adc
-      - samsung,s3c2416-adc
-      - samsung,s3c2440-adc
-      - samsung,s3c2443-adc
-      - samsung,s3c6410-adc
-      - samsung,s5pv210-adc
+    oneOf:
+      - enum:
+          - samsung,exynos-adc-v1                 # Exynos5250
+          - samsung,exynos-adc-v2
+          - samsung,exynos3250-adc
+          - samsung,exynos4212-adc                # Exynos4212 and Exynos4412
+          - samsung,exynos7-adc
+          - samsung,s3c6410-adc
+          - samsung,s5pv210-adc
+      - items:
+          - enum:
+              - samsung,exynos5433-adc
+          - const: samsung,exynos7-adc
 
   reg:
     maxItems: 1
@@ -41,8 +42,6 @@ properties:
     maxItems: 2
 
   interrupts:
-    description:
-      ADC interrupt followed by optional touchscreen interrupt.
     minItems: 1
     maxItems: 2
 
@@ -52,16 +51,11 @@ properties:
   vdd-supply: true
 
   samsung,syscon-phandle:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to the PMU system controller node (to access the ADC_PHY
       register on Exynos3250/4x12/5250/5420/5800).
 
-  has-touchscreen:
-    description:
-      If present, indicates that a touchscreen is connected and usable.
-    type: boolean
-
 required:
   - compatible
   - reg
@@ -113,20 +107,29 @@ allOf:
             - const: adc
 
   - if:
-      required:
-        - has-touchscreen
+      properties:
+        compatible:
+          contains:
+            const: samsung,s5pv210-adc
     then:
       properties:
         interrupts:
-          minItems: 2
-          maxItems: 2
+          items:
+            - description: main (ADC)
+            - description: pending (PENDN)
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
     adc: adc@12d10000 {
         compatible = "samsung,exynos-adc-v1";
         reg = <0x12d10000 0x100>;
-        interrupts = <0 106 0>;
+        interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
         #io-channel-cells = <1>;
 
         clocks = <&clock 303>;
@@ -142,16 +145,17 @@ examples:
             pullup-ohm = <47000>;
             pulldown-ohm = <0>;
             io-channels = <&adc 4>;
-          };
+        };
     };
 
   - |
     #include <dt-bindings/clock/exynos3250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     adc@126c0000 {
         compatible = "samsung,exynos3250-adc";
-        reg = <0x126C0000 0x100>;
-        interrupts = <0 137 0>;
+        reg = <0x126c0000 0x100>;
+        interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
         #io-channel-cells = <1>;
 
         clocks = <&cmu CLK_TSADC>,
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
index 2287697f1f61..c3a116427dc3 100644
--- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/sigma-delta-modulator.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device-Tree bindings for sigma delta modulator
+title: Sigma delta modulator
 
 maintainers:
   - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
@@ -18,18 +18,39 @@ properties:
       - sd-modulator
       - ads1201
 
+  '#io-backend-cells':
+    const: 0
+
   '#io-channel-cells':
     const: 0
 
+  vref-supply:
+    description: Phandle to the vref input analog reference voltage.
+
+dependencies:
+  vref-supply: [ '#io-backend-cells' ]
+
 required:
   - compatible
-  - '#io-channel-cells'
+
+anyOf:
+  - required: ['#io-backend-cells']
+  - required: ['#io-channel-cells']
 
 additionalProperties: false
 
 examples:
   - |
-    ads1202: adc {
+    // Backend binding example. SD modulator configured as an IIO backend device
+    ads1201_0: adc {
+      compatible = "sd-modulator";
+      vref-supply = <&vdd_adc>;
+      #io-backend-cells = <0>;
+    };
+
+  - |
+    // Legacy binding example. SD modulator configured as an IIO channel provider
+    ads1201_1: adc {
       compatible = "sd-modulator";
       #io-channel-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/sophgo,cv1800b-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/sophgo,cv1800b-saradc.yaml
new file mode 100644
index 000000000000..f652b98615f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/sophgo,cv1800b-saradc.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/sophgo,cv1800b-saradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Sophgo CV1800B SoC 3 channels Successive Approximation Analog to
+  Digital Converters
+
+maintainers:
+  - Thomas Bonnefille <thomas.bonnefille@bootlin.com>
+
+description:
+  Datasheet at https://github.com/sophgo/sophgo-doc/releases
+
+properties:
+  compatible:
+    const: sophgo,cv1800b-saradc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@[0-2]$":
+    $ref: adc.yaml
+
+    properties:
+      reg:
+        items:
+          - minimum: 0
+            maximum: 2
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/sophgo,cv1800.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    adc@30f0000 {
+        compatible = "sophgo,cv1800b-saradc";
+        reg = <0x030f0000 0x1000>;
+        clocks = <&clk CLK_SARADC>;
+        interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+            reg = <0>;
+        };
+
+        channel@1 {
+            reg = <1>;
+        };
+
+        channel@2 {
+            reg = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
index caa3ee0b4b8c..a678323d78e3 100644
--- a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/sprd,sc2720-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Spreadtrum SC27XX series PMICs ADC binding
+title: Spreadtrum SC27XX series PMICs ADC
 
 maintainers:
   - Baolin Wang <baolin.wang7@gmail.com>
@@ -20,6 +20,7 @@ properties:
       - sprd,sc2723-adc
       - sprd,sc2730-adc
       - sprd,sc2731-adc
+      - sprd,ump9620-adc
 
   reg:
     maxItems: 1
@@ -33,13 +34,39 @@ properties:
   hwlocks:
     maxItems: 1
 
-  nvmem-cells:
-    maxItems: 2
+  nvmem-cells: true
 
-  nvmem-cell-names:
-    items:
-      - const: big_scale_calib
-      - const: small_scale_calib
+  nvmem-cell-names: true
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - sprd,ump9620-adc
+    then:
+      properties:
+        nvmem-cells:
+          maxItems: 2
+        nvmem-cell-names:
+          items:
+            - const: big_scale_calib
+            - const: small_scale_calib
+
+    else:
+      properties:
+        nvmem-cells:
+          maxItems: 6
+        nvmem-cell-names:
+          items:
+            - const: big_scale_calib1
+            - const: big_scale_calib2
+            - const: small_scale_calib1
+            - const: small_scale_calib2
+            - const: vbat_det_cal1
+            - const: vbat_det_cal2
 
 required:
   - compatible
@@ -58,15 +85,19 @@ examples:
     pmic {
         #address-cells = <1>;
         #size-cells = <0>;
-        adc@480 {
-            compatible = "sprd,sc2731-adc";
-            reg = <0x480>;
-            interrupt-parent = <&sc2731_pmic>;
+        adc@504 {
+            compatible = "sprd,ump9620-adc";
+            reg = <0x504>;
+            interrupt-parent = <&ump9620_pmic>;
             interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
             #io-channel-cells = <1>;
             hwlocks = <&hwlock 4>;
-            nvmem-cells = <&adc_big_scale>, <&adc_small_scale>;
-            nvmem-cell-names = "big_scale_calib", "small_scale_calib";
+            nvmem-cells = <&adc_bcal1>, <&adc_bcal2>,
+                          <&adc_scal1>, <&adc_scal2>,
+                          <&vbat_det_cal1>, <&vbat_det_cal2>;
+            nvmem-cell-names = "big_scale_calib1", "big_scale_calib2",
+                               "small_scale_calib1", "small_scale_calib2",
+                               "vbat_det_cal1", "vbat_det_cal2";
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml
new file mode 100644
index 000000000000..dd9ec3038703
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/st,spear600-adc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/st,spear600-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST SPEAr ADC device driver
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Integrated ADC inside the ST SPEAr SoC, SPEAr600, supporting
+  10-bit resolution. Datasheet can be found here:
+  https://www.st.com/resource/en/datasheet/spear600.pdf
+
+properties:
+  compatible:
+    enum:
+      - st,spear600-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  sampling-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2500000
+    maximum: 20000000
+    description:
+      Default sampling frequency of the ADC in Hz.
+
+  vref-external:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000
+    maximum: 2800
+    description:
+      External voltage reference in milli-volts. If omitted the internal voltage
+      reference will be used.
+
+  average-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    default: 0
+    description:
+      Number of samples to generate an average value. If omitted, single data
+      conversion will be used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - sampling-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    adc@d8200000 {
+        compatible = "st,spear600-adc";
+        reg = <0xd8200000 0x1000>;
+        interrupt-parent = <&vic1>;
+        interrupts = <6>;
+        sampling-frequency = <5000000>;
+        vref-external = <2500>;	/* 2.5V VRef */
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index 4d6074518b5c..c4c4575d3fa9 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 ADC bindings
+title: STMicroelectronics STM32 ADC
 
 description: |
   STM32 ADC is a successive approximation analog-to-digital converter.
@@ -27,6 +27,7 @@ properties:
       - st,stm32f4-adc-core
       - st,stm32h7-adc-core
       - st,stm32mp1-adc-core
+      - st,stm32mp13-adc-core
 
   reg:
     maxItems: 1
@@ -37,6 +38,7 @@ properties:
         - stm32f4 and stm32h7 share a common ADC interrupt line.
         - stm32mp1 has two separate interrupt lines, one for each ADC within
           ADC block.
+        - stm32mp13 has an interrupt line per ADC block.
     minItems: 1
     maxItems: 2
 
@@ -52,7 +54,9 @@ properties:
           It's not present on stm32f4.
           It's required on stm32h7 and stm32mp1.
 
-  clock-names: true
+  clock-names:
+    minItems: 1
+    maxItems: 2
 
   st,max-clk-rate-hz:
     description:
@@ -78,7 +82,7 @@ properties:
     description:
       Phandle to system configuration controller. It can be used to control the
       analog circuitry on stm32mp1.
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
 
   interrupt-controller: true
 
@@ -91,6 +95,10 @@ properties:
   '#size-cells':
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 allOf:
   - if:
       properties:
@@ -138,7 +146,6 @@ allOf:
             - const: bus
             - const: adc
           minItems: 1
-          maxItems: 2
 
         interrupts:
           items:
@@ -170,7 +177,6 @@ allOf:
             - const: bus
             - const: adc
           minItems: 1
-          maxItems: 2
 
         interrupts:
           items:
@@ -182,6 +188,33 @@ allOf:
           maximum: 36000000
           default: 36000000
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp13-adc-core
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+
+        clock-names:
+          items:
+            - const: bus
+            - const: adc
+          minItems: 1
+
+        interrupts:
+          items:
+            - description: ADC interrupt line
+
+        st,max-clk-rate-hz:
+          minimum: 150000
+          maximum: 75000000
+          default: 75000000
+
 additionalProperties: false
 
 required:
@@ -210,6 +243,7 @@ patternProperties:
           - st,stm32f4-adc
           - st,stm32h7-adc
           - st,stm32mp1-adc
+          - st,stm32mp13-adc
 
       reg:
         description: |
@@ -231,7 +265,7 @@ patternProperties:
       interrupts:
         description: |
           IRQ Line for the ADC instance. Valid values are:
-            - 0 for adc@0
+            - 0 for adc@0 (single adc for stm32mp13)
             - 1 for adc@100
             - 2 for adc@200 (stm32f4 only)
         maxItems: 1
@@ -252,13 +286,14 @@ patternProperties:
       assigned-resolution-bits:
         description: |
           Resolution (bits) to use for conversions:
-            - can be 6, 8, 10 or 12 on stm32f4
+            - can be 6, 8, 10 or 12 on stm32f4 and stm32mp13
             - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
 
       st,adc-channels:
         description: |
           List of single-ended channels muxed for this ADC. It can have up to:
             - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4
+            - 19 channels, numbered from 0 to 18 (for in0..in18) on stm32mp13.
             - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and
               stm32mp1.
         $ref: /schemas/types.yaml#/definitions/uint32-array
@@ -312,7 +347,7 @@ patternProperties:
     patternProperties:
       "^channel@([0-9]|1[0-9])$":
         type: object
-        $ref: "adc.yaml"
+        $ref: adc.yaml
         description: Represents the external channels which are connected to the ADC.
 
         properties:
@@ -324,7 +359,7 @@ patternProperties:
           label:
             description: |
               Unique name to identify which channel this is.
-              Reserved label names "vddcore", "vrefint" and "vbat"
+              Reserved label names "vddcore", "vddcpu", "vddq_ddr", "vrefint" and "vbat"
               are used to identify internal channels with matching names.
 
           diff-channels:
@@ -421,6 +456,36 @@ patternProperties:
               items:
                 minimum: 40
 
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32mp13-adc
+
+        then:
+          properties:
+            reg:
+              const: 0x0
+
+            interrupts:
+              const: 0
+
+            assigned-resolution-bits:
+              enum: [6, 8, 10, 12]
+              default: 12
+
+            st,adc-channels:
+              minItems: 1
+              maxItems: 19
+              items:
+                minimum: 0
+                maximum: 18
+
+            st,min-sample-time-nsecs:
+              minItems: 1
+              maxItems: 19
+              items:
+                minimum: 40
     additionalProperties: false
 
     required:
@@ -432,7 +497,7 @@ patternProperties:
 examples:
   - |
     // Example 1: with stm32f429, ADC1, single-ended channel 8
-      adc123: adc@40012000 {
+    adc123: adc@40012000 {
         compatible = "st,stm32f4-adc-core";
         reg = <0x40012000 0x400>;
         interrupts = <18>;
@@ -446,28 +511,28 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         adc@0 {
-          compatible = "st,stm32f4-adc";
-          #io-channel-cells = <1>;
-          reg = <0x0>;
-          clocks = <&rcc 0 168>;
-          interrupt-parent = <&adc123>;
-          interrupts = <0>;
-          st,adc-channels = <8>;
-          dmas = <&dma2 0 0 0x400 0x0>;
-          dma-names = "rx";
-          assigned-resolution-bits = <8>;
+            compatible = "st,stm32f4-adc";
+            #io-channel-cells = <1>;
+            reg = <0x0>;
+            clocks = <&rcc 0 168>;
+            interrupt-parent = <&adc123>;
+            interrupts = <0>;
+            st,adc-channels = <8>;
+            dmas = <&dma2 0 0 0x400 0x0>;
+            dma-names = "rx";
+            assigned-resolution-bits = <8>;
         };
         // ...
         // other adc child nodes follow...
-      };
+    };
 
   - |
     // Example 2: with stm32mp157c to setup ADC1 with:
     // - channels 0 & 1 as single-ended
     // - channels 2 & 3 as differential (with resp. 6 & 7 negative inputs)
-      #include <dt-bindings/interrupt-controller/arm-gic.h>
-      #include <dt-bindings/clock/stm32mp1-clks.h>
-      adc12: adc@48003000 {
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    adc12: adc@48003000 {
         compatible = "st,stm32mp1-adc-core";
         reg = <0x48003000 0x400>;
         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -484,27 +549,27 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         adc@0 {
-          compatible = "st,stm32mp1-adc";
-          #io-channel-cells = <1>;
-          reg = <0x0>;
-          interrupt-parent = <&adc12>;
-          interrupts = <0>;
-          st,adc-channels = <0 1>;
-          st,adc-diff-channels = <2 6>, <3 7>;
-          st,min-sample-time-nsecs = <5000>;
-          dmas = <&dmamux1 9 0x400 0x05>;
-          dma-names = "rx";
+            compatible = "st,stm32mp1-adc";
+            #io-channel-cells = <1>;
+            reg = <0x0>;
+            interrupt-parent = <&adc12>;
+            interrupts = <0>;
+            st,adc-channels = <0 1>;
+            st,adc-diff-channels = <2 6>, <3 7>;
+            st,min-sample-time-nsecs = <5000>;
+            dmas = <&dmamux1 9 0x400 0x05>;
+            dma-names = "rx";
         };
         // ...
         // other adc child node follow...
-      };
+    };
 
   - |
     // Example 3: with stm32mp157c to setup ADC2 with:
     // - internal channels 13, 14, 15.
-      #include <dt-bindings/interrupt-controller/arm-gic.h>
-      #include <dt-bindings/clock/stm32mp1-clks.h>
-      adc122: adc@48003000 {
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    adc122: adc@48003000 {
         compatible = "st,stm32mp1-adc-core";
         reg = <0x48003000 0x400>;
         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
@@ -521,28 +586,28 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         adc@100 {
-          compatible = "st,stm32mp1-adc";
-          #io-channel-cells = <1>;
-          reg = <0x100>;
-          interrupts = <1>;
-          #address-cells = <1>;
-          #size-cells = <0>;
-          channel@13 {
-            reg = <13>;
-            label = "vrefint";
-            st,min-sample-time-ns = <9000>;
-          };
-          channel@14 {
-            reg = <14>;
-            label = "vddcore";
-            st,min-sample-time-ns = <9000>;
-          };
-          channel@15 {
-            reg = <15>;
-            label = "vbat";
-            st,min-sample-time-ns = <9000>;
-          };
+            compatible = "st,stm32mp1-adc";
+            #io-channel-cells = <1>;
+            reg = <0x100>;
+            interrupts = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@13 {
+                reg = <13>;
+                label = "vrefint";
+                st,min-sample-time-ns = <9000>;
+            };
+            channel@14 {
+                reg = <14>;
+                label = "vddcore";
+                st,min-sample-time-ns = <9000>;
+            };
+            channel@15 {
+                reg = <15>;
+                label = "vbat";
+                st,min-sample-time-ns = <9000>;
+            };
         };
-      };
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 7c260f209687..c24ac98bbb3d 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -59,6 +59,10 @@ properties:
       If not, SPI CLKOUT frequency will not be accurate.
     maximum: 20000000
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
@@ -72,6 +76,7 @@ additionalProperties: false
 patternProperties:
   "^filter@[0-9]+$":
     type: object
+    unevaluatedProperties: false
     description: child node
 
     properties:
@@ -97,9 +102,11 @@ patternProperties:
         items:
           minimum: 0
           maximum: 7
+        deprecated: true
 
       st,adc-channel-names:
         description: List of single-ended channel names.
+        deprecated: true
 
       st,filter-order:
         description: |
@@ -108,13 +115,17 @@ patternProperties:
           - [1-5]: order 1 to 5.
           For audio purpose it is recommended to use order 3 to 5.
         $ref: /schemas/types.yaml#/definitions/uint32
-        items:
-          minimum: 0
-          maximum: 5
+        maximum: 5
 
       "#io-channel-cells":
         const: 1
 
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
       st,adc-channel-types:
         description: |
           Single-ended channel input type.
@@ -125,6 +136,7 @@ patternProperties:
         items:
           enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
         $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+        deprecated: true
 
       st,adc-channel-clk-src:
         description: |
@@ -136,6 +148,7 @@ patternProperties:
         items:
           enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
         $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+        deprecated: true
 
       st,adc-alt-channel:
         description:
@@ -144,6 +157,7 @@ patternProperties:
           If not set, channel n is connected to SPI input n.
           If set, channel n is connected to SPI input n + 1.
         type: boolean
+        deprecated: true
 
       st,filter0-sync:
         description:
@@ -162,11 +176,60 @@ patternProperties:
       - compatible
       - reg
       - interrupts
-      - st,adc-channels
-      - st,adc-channel-names
       - st,filter-order
       - "#io-channel-cells"
 
+    patternProperties:
+      "^channel@[0-7]$":
+        type: object
+        $ref: adc.yaml
+        unevaluatedProperties: false
+        description: Represents the external channels which are connected to the DFSDM.
+
+        properties:
+          reg:
+            maximum: 7
+
+          label:
+            description:
+              Unique name to identify which channel this is.
+
+          st,adc-channel-type:
+            description: |
+              Single-ended channel input type.
+              - "SPI_R": SPI with data on rising edge (default)
+              - "SPI_F": SPI with data on falling edge
+              - "MANCH_R": manchester codec, rising edge = logic 0, falling edge = logic 1
+              - "MANCH_F": manchester codec, rising edge = logic 1, falling edge = logic 0
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ SPI_R, SPI_F, MANCH_R, MANCH_F ]
+
+          st,adc-channel-clk-src:
+            description: |
+              Conversion clock source.
+              - "CLKIN": external SPI clock (CLKIN x)
+              - "CLKOUT": internal SPI clock (CLKOUT) (default)
+              - "CLKOUT_F": internal SPI clock divided by 2 (falling edge).
+              - "CLKOUT_R": internal SPI clock divided by 2 (rising edge).
+            $ref: /schemas/types.yaml#/definitions/string
+            enum: [ CLKIN, CLKOUT, CLKOUT_F, CLKOUT_R ]
+
+          st,adc-alt-channel:
+            description:
+              Must be defined if two sigma delta modulators are
+              connected on same SPI input.
+              If not set, channel n is connected to SPI input n.
+              If set, channel n is connected to SPI input n + 1.
+            type: boolean
+
+          io-backends:
+            description:
+              Used to pipe external sigma delta modulator or internal ADC backend to DFSDM channel.
+            maxItems: 1
+
+        required:
+          - reg
+
     allOf:
       - if:
           properties:
@@ -174,7 +237,7 @@ patternProperties:
               contains:
                 const: st,stm32-dfsdm-adc
 
-      - then:
+        then:
           properties:
             st,adc-channels:
               minItems: 1
@@ -196,9 +259,19 @@ patternProperties:
               description:
                 From common IIO binding. Used to pipe external sigma delta
                 modulator or internal ADC output to DFSDM channel.
+              deprecated: true
 
-          required:
-            - io-channels
+          if:
+            required:
+              - st,adc-channels
+          then:
+            required:
+              - io-channels
+
+          patternProperties:
+            "^channel@[0-7]$":
+              required:
+                - io-backends
 
       - if:
           properties:
@@ -206,7 +279,7 @@ patternProperties:
               contains:
                 const: st,stm32-dfsdm-dmic
 
-      - then:
+        then:
           properties:
             st,adc-channels:
               maxItems: 1
@@ -227,6 +300,7 @@ patternProperties:
           patternProperties:
             "^dfsdm-dai+$":
               type: object
+              additionalProperties: false
               description: child node
 
               properties:
@@ -242,6 +316,10 @@ patternProperties:
                     From common IIO binding. Used to pipe external sigma delta
                     modulator or internal ADC output to DFSDM channel.
 
+                port:
+                  $ref: /schemas/sound/audio-graph-port.yaml#
+                  unevaluatedProperties: false
+
               required:
                 - compatible
                 - "#sound-dai-cells"
@@ -254,7 +332,7 @@ allOf:
           contains:
             const: st,stm32h7-dfsdm
 
-  - then:
+    then:
       patternProperties:
         "^filter@[0-9]+$":
           properties:
@@ -269,7 +347,7 @@ allOf:
           contains:
             const: st,stm32mp1-dfsdm
 
-  - then:
+    then:
       patternProperties:
         "^filter@[0-9]+$":
           properties:
@@ -290,6 +368,7 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;
 
+      // Example 1: Audio use case with generic binding
       dfsdm0: filter@0 {
         compatible = "st,stm32-dfsdm-dmic";
         reg = <0>;
@@ -297,12 +376,18 @@ examples:
         dmas = <&dmamux1 101 0x400 0x01>;
         dma-names = "rx";
         #io-channel-cells = <1>;
-        st,adc-channels = <1>;
-        st,adc-channel-names = "dmic0";
-        st,adc-channel-types = "SPI_R";
-        st,adc-channel-clk-src = "CLKOUT";
+        #address-cells = <1>;
+        #size-cells = <0>;
         st,filter-order = <5>;
 
+        channel@1 {
+          reg = <1>;
+          label = "dmic0";
+          st,adc-channel-type = "SPI_R";
+          st,adc-channel-clk-src = "CLKOUT";
+          st,adc-alt-channel;
+        };
+
         asoc_pdm0: dfsdm-dai {
           compatible = "st,stm32h7-dfsdm-dai";
           #sound-dai-cells = <0>;
@@ -310,19 +395,34 @@ examples:
         };
       };
 
-      dfsdm_pdm1: filter@1 {
+      // Example 2: Analog use case with generic binding
+      dfsdm1: filter@1 {
         compatible = "st,stm32-dfsdm-adc";
         reg = <1>;
         interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
         dmas = <&dmamux1 102 0x400 0x01>;
         dma-names = "rx";
-        #io-channel-cells = <1>;
-        st,adc-channels = <2 3>;
-        st,adc-channel-names = "in2", "in3";
-        st,adc-channel-types = "SPI_R", "SPI_R";
-        st,adc-channel-clk-src = "CLKOUT_F", "CLKOUT_F";
-        io-channels = <&sd_adc2 &sd_adc3>;
         st,filter-order = <1>;
+        #io-channel-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@2 {
+          reg = <2>;
+          label = "in2";
+          st,adc-channel-type = "SPI_F";
+          st,adc-channel-clk-src = "CLKOUT";
+          st,adc-alt-channel;
+          io-backends = <&sd_adc2>;
+        };
+
+        channel@3 {
+          reg = <3>;
+          label = "in3";
+          st,adc-channel-type = "SPI_R";
+          st,adc-channel-clk-src = "CLKOUT";
+          io-backends = <&sd_adc3>;
+        };
       };
     };
 
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
index 9049c699152f..474e35c49348 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@@ -13,8 +13,7 @@ description:
   This ADC forms part of an ST microelectronics STMPE multifunction device .
   The ADC is shared with the STMPE touchscreen. As a result some ADC related
   settings are specified in the parent node.
-  The node name myst be stmpe_adc and should be a child node of the stmpe node
-  to which it belongs.
+  The node should be a child node of the stmpe node to which it belongs.
 
 properties:
   compatible:
@@ -36,10 +35,8 @@ additionalProperties: false
 
 examples:
   - |
-    stmpe {
-        stmpe_adc {
-            compatible = "st,stmpe-adc";
-            st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
-        };
+    adc {
+        compatible = "st,stmpe-adc";
+        st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml
new file mode 100644
index 000000000000..caaad777580c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc081c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Single-channel I2C ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+description: |
+  Single-channel ADC supporting 8, 10, or 12-bit samples and high/low alerts.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc081c
+      - ti,adc101c
+      - ti,adc121c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Regulator for the combined power supply and voltage reference
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@52 {
+            compatible = "ti,adc081c";
+            reg = <0x52>;
+            vref-supply = <&reg_2p5v>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
index f5a923cc847f..686721176a58 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
@@ -24,8 +24,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: External reference, needed to establish input scaling
 
@@ -37,7 +35,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
index 1a113b30a414..726d2cbfa368 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
@@ -19,8 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: External reference, needed to establish input scaling
 
@@ -37,7 +35,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
index 54955f03df93..a60b1e100ee4 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments ADC108S102 and ADC128S102
 
 maintainers:
-  - Bogdan Pricop <bogdan.pricop@emutex.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   Family of 8 channel, 10/12 bit, SPI, single ended ADCs.
@@ -19,7 +19,6 @@ properties:
 
   reg: true
   vref-supply: true
-  spi-max-frequency: true
   "#io-channel-cells":
     const: 1
 
@@ -28,12 +27,15 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     spi {
-        #address-cells= <1>;
+        #address-cells = <1>;
         #size-cells = <0>;
 
         adc@0 {
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
index ec3b2edf1fb7..076088a328c3 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
@@ -31,8 +31,6 @@ properties:
     maxItems: 1
     description: Conversion clock input.
 
-  spi-max-frequency: true
-
   vref-p-supply:
     description: The regulator supply for positive analog voltage reference
 
@@ -62,7 +60,10 @@ required:
   - clocks
   - vref-p-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
index d54a0183f024..044b66a3b00c 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
@@ -27,8 +27,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
   "#io-channel-cells":
@@ -39,11 +37,13 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/interrupt-controller/irq.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
index 3f4f334d6f73..afe782522904 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
@@ -21,8 +21,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdda-supply: true
 
   "#io-channel-cells":
@@ -32,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
index 2c2d01bbc296..718f633c6e04 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/ti,ads1015.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI ADS1015 4 channel I2C analog to digital converter
+title: TI ADS1015/ADS1115 4 channel I2C analog to digital converter
 
 maintainers:
   - Daniel Baluta <daniel.baluta@nxp.com>
@@ -15,11 +15,18 @@ description: |
 
 properties:
   compatible:
-    const: ti,ads1015
+    enum:
+      - ti,ads1015
+      - ti,ads1115
+      - ti,tla2021
+      - ti,tla2024
 
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -40,6 +47,7 @@ additionalProperties: false
 patternProperties:
   "^channel@[0-7]+$":
     type: object
+    additionalProperties: false
     description:
       Child nodes needed for each channel that the platform uses.
 
@@ -74,9 +82,9 @@ patternProperties:
       ti,datarate:
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
-        maximum: 6
+        maximum: 7
         description: |
-          Data acquisition rate in samples per second
+          Data acquisition rate in samples per second for ADS1015, TLA2024
           0: 128
           1: 250
           2: 490
@@ -84,6 +92,17 @@ patternProperties:
           4: 1600 (default)
           5: 2400
           6: 3300
+          7: 3300
+
+          Data acquisition rate in samples per second for ADS1115
+          0: 8
+          1: 16
+          2: 32
+          3: 64
+          4: 128 (default)
+          5: 250
+          6: 475
+          7: 860
 
     required:
       - reg
@@ -100,12 +119,12 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
             channel@0 {
-              reg = <0>;
+                reg = <0>;
             };
             channel@4 {
-              reg = <4>;
-              ti,gain = <3>;
-              ti,datarate = <5>;
+                reg = <4>;
+                ti,gain = <3>;
+                ti,datarate = <5>;
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml
new file mode 100644
index 000000000000..970ccab15e1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI ADS1100/ADS1000 single channel I2C analog to digital converter
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  Datasheet at: https://www.ti.com/lit/gpn/ads1100
+
+properties:
+  compatible:
+    enum:
+      - ti,ads1100
+      - ti,ads1000
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  "#io-channel-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@49 {
+            compatible = "ti,ads1100";
+            reg = <0x49>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml
new file mode 100644
index 000000000000..ba6850ab1f90
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1119.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS1119 ADC
+
+maintainers:
+  - João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
+
+description:
+  The TI ADS1119 is a precision 16-bit ADC over I2C that offers single-ended and
+  differential measurements using a multiplexed input. It features a programmable
+  gain, a programmable sample rate, an internal oscillator and voltage reference,
+  and a 50/60Hz rejection filter.
+
+properties:
+  compatible:
+    const: ti,ads1119
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply: true
+  dvdd-supply: true
+
+  vref-supply:
+    description:
+      ADC external reference voltage (VREF).
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - avdd-supply
+  - dvdd-supply
+
+patternProperties:
+  "^channel@([0-6])$":
+    $ref: adc.yaml
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 6
+
+      diff-channels:
+        description:
+          Differential input channels AIN0-AIN1, AIN2-AIN3 and AIN1-AIN2.
+        oneOf:
+          - items:
+              - const: 0
+              - const: 1
+          - items:
+              - const: 2
+              - const: 3
+          - items:
+              - const: 1
+              - const: 2
+
+      single-channel:
+        description:
+          Single-ended input channels AIN0, AIN1, AIN2 and AIN3.
+        minimum: 0
+        maximum: 3
+
+    oneOf:
+      - required:
+          - diff-channels
+      - required:
+          - single-channel
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@40 {
+            compatible = "ti,ads1119";
+            reg = <0x40>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+            avdd-supply = <&reg_avdd_ads1119>;
+            dvdd-supply = <&reg_dvdd_ads1119>;
+            vref-supply = <&reg_vref_ads1119>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            channel@0 {
+                reg = <0>;
+                single-channel = <0>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                diff-channels = <0 1>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                single-channel = <3>;
+            };
+
+            channel@3 {
+                reg = <3>;
+                single-channel = <1>;
+            };
+
+            channel@4 {
+                reg = <4>;
+                single-channel = <2>;
+            };
+
+            channel@5 {
+                reg = <5>;
+                diff-channels = <1 2>;
+            };
+
+            channel@6 {
+                reg = <6>;
+                diff-channels = <2 3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
index 9f5e96439c01..56a3f1766aab 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments' ads124s08 and ads124s06 ADC chip
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 properties:
   compatible:
@@ -18,8 +18,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpha: true
 
   reset-gpios:
@@ -32,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
new file mode 100644
index 000000000000..71f9f9b745cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1298.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments' ads1298 medical ADC chips
+
+description: |
+  Datasheet at: https://www.ti.com/product/ADS1298
+  Bindings for this chip aren't complete.
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+properties:
+  compatible:
+    enum:
+      - ti,ads1298
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      Analog power supply, voltage between AVDD and AVSS. When providing a
+      symmetric +/- 2.5V, the regulator should report 5V.
+
+  vref-supply:
+    description:
+      Optional reference voltage. If omitted, internal reference is used,
+      which is 2.4V when analog supply is below 4.4V, 4V otherwise.
+
+  clocks:
+    description: Optional 2.048 MHz external source clock on CLK pin
+    maxItems: 1
+
+  interrupts:
+    description: Interrupt on DRDY pin, triggers on falling edge
+    maxItems: 1
+
+  label: true
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@1 {
+          reg = <1>;
+          compatible = "ti,ads1298";
+          label = "ads1298-1-ecg";
+          avdd-supply = <&reg_iso_5v_a>;
+          clocks = <&clk_ads1298>;
+          interrupt-parent = <&gpio0>;
+          interrupts = <78 IRQ_TYPE_EDGE_FALLING>;
+          spi-max-frequency = <20000000>;
+          spi-cpha;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
index e0670e3fbb72..890f125d422c 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
 
 maintainers:
-  - Tomislav Denis <tomislav.denis@avl.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   The ADS131E0x are a family of multichannel, simultaneous sampling,
@@ -28,8 +28,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpha: true
 
   clocks:
@@ -79,7 +77,7 @@ required:
 
 patternProperties:
   "^channel@([0-7])$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
     type: object
     description: |
       Represents the external channels which are connected to the ADC.
@@ -120,7 +118,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7138.yaml
new file mode 100644
index 000000000000..a51893e207d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7138.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads7138.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS7128/ADS7138 analog-to-digital converter (ADC)
+
+maintainers:
+  - Tobias Sperling <tobias.sperling@softing.com>
+
+description: |
+  The ADS7128 and ADS7138 chips are 12-bit, 8 channel analog-to-digital
+  converters (ADC) with build-in digital window comparator (DWC), using the
+  I2C interface.
+  ADS7128 differs in the addition of further hardware features, like a
+  root-mean-square (RMS) and a zero-crossing-detect (ZCD) module.
+
+  Datasheets:
+    https://www.ti.com/product/ADS7128
+    https://www.ti.com/product/ADS7138
+
+properties:
+  compatible:
+    enum:
+      - ti,ads7128
+      - ti,ads7138
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      The regulator used as analog supply voltage as well as reference voltage.
+
+  interrupts:
+    description:
+      Interrupt on ALERT pin, triggers on low level.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@10 {
+            compatible = "ti,ads7138";
+            reg = <0x10>;
+            avdd-supply = <&reg_stb_3v3>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
new file mode 100644
index 000000000000..0d8d06afed8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads7924.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI ADS7924 4 channels 12 bits I2C analog to digital converter
+
+maintainers:
+  - Hugo Villeneuve <hvilleneuve@dimonoff.com>
+
+description: |
+  Texas Instruments ADS7924 4 channels 12 bits I2C analog to digital converter
+
+  Specifications:
+    https://www.ti.com/lit/gpn/ads7924
+
+properties:
+  compatible:
+    const: ti,ads7924
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage (AVDD)
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+patternProperties:
+  "^channel@[0-3]+$":
+    $ref: adc.yaml
+
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 4 channels numbered from 0 to 3.
+        items:
+          - minimum: 0
+            maximum: 3
+
+      label: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@48 {
+            compatible = "ti,ads7924";
+            reg = <0x48>;
+            vref-supply = <&ads7924_reg>;
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                label = "CH0";
+            };
+            channel@1 {
+                reg = <1>;
+                label = "CH1";
+            };
+            channel@2 {
+                reg = <2>;
+                label = "CH2";
+            };
+            channel@3 {
+                reg = <3>;
+                label = "CH3";
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
index b8c398187d5c..f75b2c702986 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
@@ -19,8 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: Supply the 2.5V or 5V reference voltage
 
@@ -32,7 +30,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
index a0af4b24877f..f26fdbc15f84 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
@@ -25,13 +25,14 @@ properties:
     description: Optional external reference.  If not supplied, assume
       REFSEL input tied low to enable the internal reference.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
index d6f21d5cccd7..b32be24a9f98 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
@@ -11,9 +11,14 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - ti,am3359-adc
-      - ti,am4372-adc
+    oneOf:
+      - enum:
+          - ti,am3359-adc
+          - ti,am4372-adc
+      - items:
+          - enum:
+              - ti,am654-adc
+          - const: ti,am3359-adc
 
   '#io-channel-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml b/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
new file mode 100644
index 000000000000..5fb65bf7749d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,lmp92064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LMP92064 Precision Current and Voltage Sensor.
+
+maintainers:
+  - Leonard Göhrs <l.goehrs@pengutronix.de>
+
+description: |
+  The LMP92064 is a two channel ADC intended for combined voltage and current
+  measurements.
+
+  The device contains two ADCs to allow simultaneous sampling of voltage and
+  current and thus of instantaneous power consumption.
+
+properties:
+  compatible:
+    enum:
+      - ti,lmp92064
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the main part of the chip
+
+  vdig-supply:
+    description: |
+      Regulator that provides power to the digital I/O part of the chip
+
+  shunt-resistor-micro-ohms:
+    description: |
+      Value of the shunt resistor (in µΩ) connected between INCP and INCN,
+      across which current is measured. Used to provide correct scaling of the
+      raw ADC measurement.
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - shunt-resistor-micro-ohms
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,lmp92064";
+            reg = <0>;
+            vdd-supply = <&vdd>;
+            vdig-supply = <&vdd>;
+            spi-max-frequency = <20000000>;
+            shunt-resistor-micro-ohms = <15000>;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
index 7b895784e008..f94057d8f605 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/ti,palmas-gpadc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Palmas general purpose ADC IP block devicetree bindings
+title: Palmas general purpose ADC IP block
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
@@ -67,19 +67,4 @@ required:
   - compatible
   - "#io-channel-cells"
 
-examples:
-  - |
-    #include <dt-bindings/clock/mt8183-clk.h>
-    pmic {
-        compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
-        adc {
-            compatible = "ti,palmas-gpadc";
-            interrupts = <18 0
-                          16 0
-                          17 0>;
-            #io-channel-cells = <1>;
-            ti,channel0-current-microamp = <5>;
-            ti,channel3-current-microamp = <10>;
-        };
-    };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
index 6c2539b3d707..314d1d99bf73 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
@@ -21,8 +21,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
   "#io-channel-cells":
@@ -33,7 +31,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
index 601d69971d84..866a05c9db36 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
@@ -23,7 +23,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
+  vref-supply:
+    description: Optional supply of the reference voltage
 
   "#io-channel-cells":
     const: 1
@@ -40,7 +41,7 @@ required:
 
 patternProperties:
   "^channel@[0-7]$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
     type: object
 
     properties:
@@ -59,7 +60,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -79,36 +83,36 @@ examples:
             #size-cells = <0>;
 
             channel@0 {
-              reg = <0>;
+                reg = <0>;
             };
             channel@1 {
-              reg = <1>;
-              settling-time-us = <700>;
-              oversampling-ratio = <5>;
+                reg = <1>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
             };
             channel@2 {
-              reg = <2>;
+                reg = <2>;
             };
             channel@3 {
-              reg = <3>;
-              settling-time-us = <700>;
-              oversampling-ratio = <5>;
+                reg = <3>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
             };
             channel@4 {
-              reg = <4>;
-              settling-time-us = <700>;
-              oversampling-ratio = <5>;
+                reg = <4>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
             };
             channel@5 {
-              reg = <5>;
-              settling-time-us = <700>;
-              oversampling-ratio = <5>;
+                reg = <5>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
             };
             channel@6 {
-              reg = <6>;
+                reg = <6>;
             };
             channel@7 {
-              reg = <7>;
+                reg = <7>;
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml
new file mode 100644
index 000000000000..e779a8986e0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,twl6030-gpadc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,twl6030-gpadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPADC subsystem in the TWL6030 power module
+
+maintainers:
+  - Andreas Kemnade <andreas@kemnade.info>
+
+description:
+  The GPADC subsystem in the TWL603X consists of a 10-bit ADC
+  combined with a 15-input analog multiplexer in the TWL6030 resp. a
+  19-input analog muliplexer in the TWL6032.
+
+properties:
+  compatible:
+    enum:
+      - ti,twl6030-gpadc
+      - ti,twl6032-gpadc
+
+  interrupts:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - interrupts
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    gpadc {
+        compatible = "ti,twl6030-gpadc";
+        interrupts = <3>;
+        #io-channel-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
index e759a5da708d..de91cb03fdc6 100644
--- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/x-powers,axp209-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: X-Powers AXP ADC bindings
+title: X-Powers AXP ADC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -27,6 +27,7 @@ description: |
    8 | batt_v
    9 | batt_chrg_i
   10 | batt_dischrg_i
+  11 | ts_v
 
   AXP22x
   ------
@@ -34,6 +35,18 @@ description: |
    1 | batt_v
    2 | batt_chrg_i
    3 | batt_dischrg_i
+   4 | ts_v
+
+  AXP717
+  ------
+   0 | batt_v
+   1 | ts_v
+   2 | vbus_v
+   3 | vsys_v
+   4 | pmic_temp
+   5 | batt_chrg_i
+   6 | vmid_v
+   7 | bkup_batt_v
 
   AXP813
   ------
@@ -42,13 +55,14 @@ description: |
    2 | batt_v
    3 | batt_chrg_i
    4 | batt_dischrg_i
-
+   5 | ts_v
 
 properties:
   compatible:
     oneOf:
       - const: x-powers,axp209-adc
       - const: x-powers,axp221-adc
+      - const: x-powers,axp717-adc
       - const: x-powers,axp813-adc
 
       - items:
diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
new file mode 100644
index 000000000000..3ae1a0bab38f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale AMS controller
+
+maintainers:
+  - Salih Erim <salih.erim@amd.com>
+  - Conall O'Griofa <conall.ogriofa@amd.com>
+
+description: |
+  The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors
+  that can be used to sample external voltages and monitor on-die operating
+  conditions, such as temperature and supply voltage levels.
+  The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and
+  PS (Processing System) SYSMON.
+  All designs should have AMS registers, but PS and PL are optional. The
+  AMS controller can work with only PS, only PL and both PS and PL
+  configurations. Please specify registers according to your design. Devicetree
+  should always have AMS module property. Providing PS & PL module is optional.
+
+  AMS Channel Details
+  ```````````````````
+  Sysmon Block  |Channel|                       Details                                 |Measurement
+                |Number |                                                               |Type
+  ---------------------------------------------------------------------------------------------------------
+  AMS CTRL      |0      |System PLLs voltage measurement, VCC_PSPLL.                    |Voltage
+                |1      |Battery voltage measurement, VCC_PSBATT.                       |Voltage
+                |2      |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |3      |Block RAM voltage measurement, VCCBRAM.                        |Voltage
+                |4      |PL Aux voltage measurement, VCCAUX.                            |Voltage
+                |5      |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL.       |Voltage
+                |6      |VCC_PSINTFP_DDR voltage measurement.                           |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PS Sysmon     |7      |LPD temperature measurement.                                   |Temperature
+                |8      |FPD temperature measurement (REMOTE).                          |Temperature
+                |9      |VCC PS LPD voltage measurement (supply1).                      |Voltage
+                |10     |VCC PS FPD voltage measurement (supply2).                      |Voltage
+                |11     |PS Aux voltage reference (supply3).                            |Voltage
+                |12     |DDR I/O VCC voltage measurement.                               |Voltage
+                |13     |PS IO Bank 503 voltage measurement (supply5).                  |Voltage
+                |14     |PS IO Bank 500 voltage measurement (supply6).                  |Voltage
+                |15     |VCCO_PSIO1 voltage measurement.                                |Voltage
+                |16     |VCCO_PSIO2 voltage measurement.                                |Voltage
+                |17     |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC).                 |Voltage
+                |18     |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT).                 |Voltage
+                |19     |VCC_PSADC voltage measurement.                                 |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PL Sysmon     |20     |PL temperature measurement.                                    |Temperature
+                |21     |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |22     |PL Auxiliary voltage measurement, VCCAUX.                      |Voltage
+                |23     |ADC Reference P+ voltage measurement.                          |Voltage
+                |24     |ADC Reference N- voltage measurement.                          |Voltage
+                |25     |PL Block RAM voltage measurement, VCCBRAM.                     |Voltage
+                |26     |LPD Internal voltage measurement, VCC_PSINTLP (supply4).       |Voltage
+                |27     |FPD Internal voltage measurement, VCC_PSINTFP (supply5).       |Voltage
+                |28     |PS Auxiliary voltage measurement (supply6).                    |Voltage
+                |29     |PL VCCADC voltage measurement (vccams).                        |Voltage
+                |30     |Differential analog input signal voltage measurement.          |Voltage
+                |31     |VUser0 voltage measurement (supply7).                          |Voltage
+                |32     |VUser1 voltage measurement (supply8).                          |Voltage
+                |33     |VUser2 voltage measurement (supply9).                          |Voltage
+                |34     |VUser3 voltage measurement (supply10).                         |Voltage
+                |35     |Auxiliary ch 0 voltage measurement (VAux0).                    |Voltage
+                |36     |Auxiliary ch 1 voltage measurement (VAux1).                    |Voltage
+                |37     |Auxiliary ch 2 voltage measurement (VAux2).                    |Voltage
+                |38     |Auxiliary ch 3 voltage measurement (VAux3).                    |Voltage
+                |39     |Auxiliary ch 4 voltage measurement (VAux4).                    |Voltage
+                |40     |Auxiliary ch 5 voltage measurement (VAux5).                    |Voltage
+                |41     |Auxiliary ch 6 voltage measurement (VAux6).                    |Voltage
+                |42     |Auxiliary ch 7 voltage measurement (VAux7).                    |Voltage
+                |43     |Auxiliary ch 8 voltage measurement (VAux8).                    |Voltage
+                |44     |Auxiliary ch 9 voltage measurement (VAux9).                    |Voltage
+                |45     |Auxiliary ch 10 voltage measurement (VAux10).                  |Voltage
+                |46     |Auxiliary ch 11 voltage measurement (VAux11).                  |Voltage
+                |47     |Auxiliary ch 12 voltage measurement (VAux12).                  |Voltage
+                |48     |Auxiliary ch 13 voltage measurement (VAux13).                  |Voltage
+                |49     |Auxiliary ch 14 voltage measurement (VAux14).                  |Voltage
+                |50     |Auxiliary ch 15 voltage measurement (VAux15).                  |Voltage
+  --------------------------------------------------------------------------------------------------------
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-ams
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    description: AMS Controller register space
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AMS reference clock
+
+  ranges:
+    description:
+      Maps the child address space for PS and/or PL.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#io-channel-cells':
+    const: 1
+
+  ams-ps@0:
+    type: object
+    description: |
+      PS (Processing System) SYSMON is memory mapped to PS. This block has
+      built-in alarm generation logic that is used to interrupt the processor
+      based on condition set.
+
+    properties:
+      compatible:
+        enum:
+          - xlnx,zynqmp-ams-ps
+
+      reg:
+        description: Register Space for PS-SYSMON
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+  ams-pl@400:
+    type: object
+    additionalProperties: false
+    description:
+      PL-SYSMON is capable of monitoring off chip voltage and temperature.
+      PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
+      from external master. Out of this interface currently only DRP is
+      supported. This block has alarm generation logic that is used to
+      interrupt the processor based on condition set.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - xlnx,zynqmp-ams-pl
+
+      reg:
+        description: Register Space for PL-SYSMON.
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^channel@([2-4][0-9]|50)$":
+        type: object
+        description:
+          Describes the external channels connected.
+
+        properties:
+          reg:
+            description:
+              Pair of pins the channel is connected to. This value is
+              same as Channel Number for a particular channel.
+            minimum: 20
+            maximum: 50
+
+          xlnx,bipolar:
+            $ref: /schemas/types.yaml#/definitions/flag
+            type: boolean
+            description:
+              If the set channel is used in bipolar mode.
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xilinx_ams: ams@ffa50000 {
+            compatible = "xlnx,zynqmp-ams";
+            interrupt-parent = <&gic>;
+            interrupts = <0 56 4>;
+            reg = <0x0 0xffa50000 0x0 0x800>;
+            clocks = <&zynqmp_clk 70>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            #io-channel-cells = <1>;
+            ranges = <0 0 0xffa50800 0x800>;
+
+            ams_ps: ams-ps@0 {
+                compatible = "xlnx,zynqmp-ams-ps";
+                reg = <0 0x400>;
+            };
+
+            ams_pl: ams-pl@400 {
+                compatible = "xlnx,zynqmp-ams-pl";
+                reg = <0x400 0x400>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                channel@30 {
+                    reg = <30>;
+                    xlnx,bipolar;
+                };
+                channel@31 {
+                    reg = <31>;
+                };
+                channel@38 {
+                    reg = <38>;
+                    xlnx,bipolar;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
new file mode 100644
index 000000000000..2a04906531fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
@@ -0,0 +1,371 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/addac/adi,ad74115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD74115H device
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The AD74115H is a single-channel software configurable input/output
+  device for industrial control applications. It contains functionality for
+  analog output, analog input, digital output, digital input, resistance
+  temperature detector, and thermocouple measurements integrated into a single
+  chip solution with an SPI interface. The device features a 16-bit ADC and a
+  14-bit DAC.
+
+    https://www.analog.com/en/products/ad74115h.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad74115h
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 24000000
+
+  spi-cpol: true
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - adc_rdy
+        - alert
+
+  avdd-supply: true
+  avcc-supply: true
+  dvcc-supply: true
+  dovdd-supply: true
+  refin-supply: true
+
+  adi,ch-func:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Channel function.
+      0 - High impedance
+      1 - Voltage output
+      2 - Current output
+      3 - Voltage input
+      4 - Current input, externally-powered
+      5 - Current input, loop-powered
+      6 - Resistance input
+      7 - RTD measure
+      8 - Digital input logic
+      9 - Digital input, loop-powered
+      10 - Current output with HART
+      11 - Current input, externally-powered, with HART
+      12 - Current input, loop-powered, with HART
+    minimum: 0
+    maximum: 12
+    default: 0
+
+  adi,conv2-mux:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Input node for ADC conversion 2.
+      0 - SENSE_EXT1 to AGND_SENSE
+      1 - SENSE_EXT2 to AGND_SENSE
+      2 - SENSE_EXT2 to SENSE_EXT1
+      3 - AGND to AGND
+    minimum: 0
+    maximum: 3
+    default: 0
+
+  adi,conv2-range-microvolt:
+    description: Conversion range for ADC conversion 2.
+    oneOf:
+      - items:
+          - enum: [-2500000, 0]
+          - const: 2500000
+      - items:
+          - enum: [-12000000, 0]
+          - const: 12000000
+      - items:
+          - const: -2500000
+          - const: 0
+      - items:
+          - const: -104000
+          - const: 104000
+      - items:
+          - const: 0
+          - const: 625000
+
+  adi,sense-agnd-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the AGND sense pin.
+
+  adi,lf-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the low-side filtered
+      sense pin.
+
+  adi,hf-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the high-side filtered
+      sense pin.
+
+  adi,ext2-buffer-low-power:
+    type: boolean
+    description: Whether to enable low-power buffered mode for the EXT2 pin.
+
+  adi,ext1-buffer-low-power:
+    type: boolean
+    description: Whether to enable low-power buffered mode for the EXT1 pin.
+
+  adi,comparator-invert:
+    type: boolean
+    description: Whether to invert the comparator output.
+
+  adi,digital-input-sink-range-high:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      When not present, the digital input range is from 0 to 3700uA in steps
+      of 120uA, with a ~2k series resistance.
+      When present, the digital input range is from 0 to 7400uA in steps
+      of 240uA, with a ~1k series resistance.
+
+  adi,digital-input-sink-microamp:
+    description: Sink current in digital input mode.
+    minimum: 0
+    maximum: 3700
+    default: 0
+
+  adi,digital-input-debounce-mode-counter-reset:
+    type: boolean
+    description: |
+      When not present, a counter increments when the signal is asserted
+      and decrements when the signal is de-asserted.
+      When present, a counter increments while the signal is asserted and
+      resets when the signal de-asserts
+
+  adi,digital-input-unbuffered:
+    type: boolean
+    description: Whether to buffer digital input signals.
+
+  adi,digital-input-short-circuit-detection:
+    type: boolean
+    description: Whether to detect digital input short circuits.
+
+  adi,digital-input-open-circuit-detection:
+    type: boolean
+    description: Whether to detect digital input open circuits.
+
+  adi,digital-input-threshold-mode-fixed:
+    type: boolean
+    description: |
+      When not present, the digital input threshold range is -0.96 * AVDD
+      to AVDD.
+      When present, the threshold range is fixed from -19V to 30V.
+
+  adi,dac-bipolar:
+    type: boolean
+    description: |
+      When not present, the DAC operates in the 0V to 12V range.
+      When present, the DAC operates in the -12V to 12V range.
+
+  adi,charge-pump:
+    type: boolean
+    description: Whether to enable the internal charge pump.
+
+  adi,dac-hart-slew:
+    type: boolean
+    description: Whether to use a HART-compatible slew rate.
+
+  adi,dac-current-limit-low:
+    type: boolean
+    description: |
+      When not present, the DAC short-circuit current limit is 32mA in
+      either source or sink for VOUT and 4mA sink for IOUT.
+      When present, the limit is 16mA in either source or sink for VOUT,
+      1mA sink for IOUT.
+
+  adi,4-wire-rtd:
+    type: boolean
+    description: |
+      When not present, the ADC should be used for measuring 3-wire RTDs.
+      When present, the ADC should be used for measuring 4-wire RTDs.
+
+  adi,3-wire-rtd-excitation-swap:
+    type: boolean
+    description: Whether to swap the excitation for 3-wire RTD.
+
+  adi,rtd-excitation-current-microamp:
+    description: Excitation current to apply to RTD.
+    enum: [250, 500, 750, 1000]
+    default: 250
+
+  adi,ext1-burnout:
+    type: boolean
+    description: Whether to enable burnout current for EXT1.
+
+  adi,ext1-burnout-current-nanoamp:
+    description:
+      Burnout current in nanoamps to be applied to EXT1.
+    enum: [0, 50, 500, 1000, 10000]
+    default: 0
+
+  adi,ext1-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for EXT1 is sinking.
+      When present, the burnout current polarity for EXT1 is sourcing.
+
+  adi,ext2-burnout:
+    type: boolean
+    description: Whether to enable burnout current for EXT2.
+
+  adi,ext2-burnout-current-nanoamp:
+    description: Burnout current in nanoamps to be applied to EXT2.
+    enum: [0, 50, 500, 1000, 10000]
+    default: 0
+
+  adi,ext2-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for EXT2 is sinking.
+      When present, the burnout current polarity for EXT2 is sourcing.
+
+  adi,viout-burnout:
+    type: boolean
+    description: Whether to enable burnout current for VIOUT.
+
+  adi,viout-burnout-current-nanoamp:
+    description: Burnout current in nanoamps to be applied to VIOUT.
+    enum: [0, 1000, 10000]
+    default: 0
+
+  adi,viout-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for VIOUT is sinking.
+      When present, the burnout current polarity for VIOUT is sourcing.
+
+  adi,gpio0-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Comparator output
+      3 - Control HART CD
+      4 - Monitor HART CD
+      5 - Monitor HART EOM status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio1-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Drive external digital output FET
+      3 - Control HART RXD
+      4 - Monitor HART RXD
+      5 - Monitor HART SOM status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio2-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Drive internal digital output FET
+      3 - Control HART TXD
+      4 - Monitor HART TXD
+      5 - Monitor HART TX complete status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio3-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - High impedance
+      3 - Control HART RTS
+      4 - Monitor HART RTS
+      5 - Monitor HART CD complete status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - spi-cpol
+  - avdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      required:
+        - adi,digital-input-sink-range-high
+    then:
+      properties:
+        adi,digital-input-sink-microamp:
+          maximum: 7400
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      addac@0 {
+        compatible = "adi,ad74115h";
+        reg = <0>;
+
+        spi-max-frequency = <12000000>;
+        spi-cpol;
+
+        reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "adc_rdy";
+
+        avdd-supply = <&ad74115_avdd>;
+
+        adi,ch-func = <1>;
+        adi,conv2-mux = <2>;
+        adi,conv2-range-microvolt = <(-12000000) 12000000>;
+
+        adi,gpio0-mode = <1>;
+        adi,gpio1-mode = <1>;
+        adi,gpio2-mode = <1>;
+        adi,gpio3-mode = <1>;
+
+        adi,dac-bipolar;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
new file mode 100644
index 000000000000..590ea7936ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/addac/adi,ad74413r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD74412R/AD74413R device
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The AD74412R and AD74413R are quad-channel software configurable input/output
+  solutions for building and process control applications. They contain
+  functionality for analog output, analog input, digital input, resistance
+  temperature detector, and thermocouple measurements integrated
+  into a single chip solution with an SPI interface.
+  The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide
+  four configurable input/output channels and a suite of diagnostic functions.
+  The AD74413R differentiates itself from the AD74412R by being HART-compatible.
+    https://www.analog.com/en/products/ad74412r.html
+    https://www.analog.com/en/products/ad74413r.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad74412r
+      - adi,ad74413r
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpol: true
+
+  interrupts:
+    maxItems: 1
+
+  refin-supply: true
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt (sense) resistor value in micro-Ohms.
+    default: 100000000
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+  - refin-supply
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+    additionalProperties: false
+    description: Represents the external channels which are connected to the device.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 4 channels numbered from 0 to 3.
+        minimum: 0
+        maximum: 3
+
+      adi,ch-func:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Channel function.
+          HART functions are not supported on AD74412R.
+          0 - CH_FUNC_HIGH_IMPEDANCE
+          1 - CH_FUNC_VOLTAGE_OUTPUT
+          2 - CH_FUNC_CURRENT_OUTPUT
+          3 - CH_FUNC_VOLTAGE_INPUT
+          4 - CH_FUNC_CURRENT_INPUT_EXT_POWER
+          5 - CH_FUNC_CURRENT_INPUT_LOOP_POWER
+          6 - CH_FUNC_RESISTANCE_INPUT
+          7 - CH_FUNC_DIGITAL_INPUT_LOGIC
+          8 - CH_FUNC_DIGITAL_INPUT_LOOP_POWER
+          9 - CH_FUNC_CURRENT_INPUT_EXT_POWER_HART
+          10 - CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART
+        minimum: 0
+        maximum: 10
+        default: 0
+
+      adi,gpo-comparator:
+        type: boolean
+        description: |
+          Whether to configure GPO as a comparator or not.
+          When not configured as a comparator, the GPO will be treated as an
+          output-only GPIO.
+
+      drive-strength-microamp:
+        description: |
+          For channels configured as digital input, this configures the sink
+          current.
+        minimum: 0
+        maximum: 1800
+        default: 0
+        multipleOf: 120
+
+    required:
+      - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/iio/addac/adi,ad74413r.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      addac@0 {
+        compatible = "adi,ad74413r";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cpol;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+        refin-supply = <&ad74413r_refin>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,ch-func = <CH_FUNC_VOLTAGE_OUTPUT>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_OUTPUT>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,ch-func = <CH_FUNC_DIGITAL_INPUT_LOGIC>;
+          adi,gpo-comparator;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_INPUT_EXT_POWER>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml b/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml
index 527501c1d695..bcf4ddcfd13b 100644
--- a/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml
+++ b/Documentation/devicetree/bindings/iio/afe/current-sense-amplifier.yaml
@@ -24,6 +24,9 @@ properties:
     description: |
       Channel node of a voltage io-channel.
 
+  "#io-channel-cells":
+    const: 0
+
   sense-resistor-micro-ohms:
     description: The sense resistance.
 
@@ -46,6 +49,7 @@ examples:
   - |
     sysi {
         compatible = "current-sense-amplifier";
+        #io-channel-cells = <0>;
         io-channels = <&tiadc 0>;
 
         sense-resistor-micro-ohms = <20000>;
diff --git a/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml b/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
new file mode 100644
index 000000000000..336ce96371db
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-sense-rtd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Sense RTD
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  RTDs (Resistance Temperature Detectors) are a kind of temperature sensors
+  used to get a linear voltage to temperature reading within a give range
+  (usually 0 to 100 degrees Celsius).
+
+  When an io-channel measures the output voltage across an RTD such as a
+  PT1000, the interesting measurement is almost always the corresponding
+  temperature, not the voltage output. This binding describes such a circuit.
+
+  The general transfer function here is (using SI units)
+
+    V = R(T) * iexc
+    R(T) = r0 * (1 + alpha * T)
+    T = 1 / (alpha * r0 * iexc) * (V - r0 * iexc)
+
+  The following circuit matches what's in the examples section.
+
+           5V0
+          -----
+            |
+        +---+----+
+        |  R 5k  |
+        +---+----+
+            |
+            V 1mA
+            |
+            +---- Vout
+            |
+        +---+----+
+        | PT1000 |
+        +---+----+
+            |
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-sense-rtd
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  excitation-current-microamp:
+    description: The current fed through the RTD sensor.
+
+  alpha-ppm-per-celsius:
+    description: |
+      alpha can also be expressed in micro-ohms per ohm Celsius. It's a linear
+      approximation of the resistance versus temperature relationship
+      between 0 and 100 degrees Celsius.
+
+      alpha = (R_100 - R_0) / (100 * R_0)
+
+      Where, R_100 is the resistance of the sensor at 100 degrees Celsius, and
+      R_0 (or r-naught-ohms) is the resistance of the sensor at 0 degrees
+      Celsius.
+
+      Pure platinum has an alpha of 3925. Industry standards such as IEC60751
+      and ASTM E-1137 specify an alpha of 3850.
+
+  r-naught-ohms:
+    description: |
+      Resistance of the sensor at 0 degrees Celsius.
+      Common values are 100 for PT100, 500 for PT500, and 1000 for PT1000
+
+additionalProperties: false
+required:
+  - compatible
+  - io-channels
+  - excitation-current-microamp
+  - alpha-ppm-per-celsius
+  - r-naught-ohms
+
+examples:
+  - |
+    pt1000_1: temperature-sensor0 {
+        compatible = "temperature-sense-rtd";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc1 0>;
+
+        excitation-current-microamp = <1000>; /* i = U/R = 5 / 5000 */
+        alpha-ppm-per-celsius = <3908>;
+        r-naught-ohms = <1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml b/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
new file mode 100644
index 000000000000..cfbf5350db27
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-transducer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Transducer
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  A temperature transducer is a device that converts a thermal quantity
+  into any other physical quantity. This binding applies to temperature to
+  voltage (like the LTC2997), and temperature to current (like the AD590)
+  linear transducers.
+  In both cases these are assumed to be connected to a voltage ADC.
+
+  When an io-channel measures the output voltage of a temperature analog front
+  end such as a temperature transducer, the interesting measurement is almost
+  always the corresponding temperature, not the voltage output. This binding
+  describes such a circuit.
+
+  The general transfer function here is (using SI units)
+    V(T) = Rsense * Isense(T)
+    T = (Isense(T) / alpha) + offset
+    T = 1 / (Rsense * alpha) * (V + offset * Rsense * alpha)
+
+  When using a temperature to voltage transducer, Rsense is set to 1.
+
+  The following circuits show a temperature to current and a temperature to
+  voltage transducer that can be used with this binding.
+
+           VCC
+          -----
+            |
+        +---+---+
+        | AD590 |                               VCC
+        +---+---+                              -----
+            |                                    |
+            V proportional to T             +----+----+
+            |                          D+ --+         |
+            +---- Vout                      | LTC2997 +--- Vout
+            |                          D- --+         |
+        +---+----+                          +---------+
+        | Rsense |                               |
+        +---+----+                             -----
+            |                                   GND
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-transducer
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  sense-offset-millicelsius:
+    description: |
+      Temperature offset.
+      This offset is commonly used to convert from Kelvins to degrees Celsius.
+      In that case, sense-offset-millicelsius would be set to <(-273150)>.
+    default: 0
+
+  sense-resistor-ohms:
+    description: |
+      The sense resistor.
+      By default sense-resistor-ohms cancels out the resistor making the
+      circuit behave like a temperature transducer.
+    default: 1
+
+  alpha-ppm-per-celsius:
+    description: |
+      Sometimes referred to as output gain, slope, or temperature coefficient.
+
+      alpha is expressed in parts per million which can be micro-amps per
+      degrees Celsius or micro-volts per degrees Celsius. The is the main
+      characteristic of a temperature transducer and should be stated in the
+      datasheet.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - io-channels
+  - alpha-ppm-per-celsius
+
+examples:
+  - |
+    ad950: temperature-sensor-0 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 3>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        sense-resistor-ohms = <8060>;
+        alpha-ppm-per-celsius = <1>; /* 1 uA/K */
+    };
+  - |
+    znq_tmp: temperature-sensor-1 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 2>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        alpha-ppm-per-celsius = <4000>; /* 4 mV/K */
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
index df2589f214e1..9752d1450064 100644
--- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
@@ -13,7 +13,7 @@ description: |
   When an io-channel measures the midpoint of a voltage divider, the
   interesting voltage is often the voltage over the full resistance
   of the divider. This binding describes the voltage divider in such
-  a curcuit.
+  a circuit.
 
     Vin ----.
             |
@@ -29,7 +29,6 @@ description: |
             |
            GND
 
-
 properties:
   compatible:
     const: voltage-divider
@@ -39,6 +38,17 @@ properties:
     description: |
       Channel node of a voltage io-channel.
 
+  '#io-channel-cells':
+    description:
+      In addition to consuming the measurement services of a voltage
+      output channel, the voltage divider can act as a provider of
+      measurement services to other devices. This is particularly
+      useful in scenarios wherein an ADC has an analog frontend,
+      such as a voltage divider, and then consuming its raw value
+      isn't interesting. In this case, the voltage before the divider
+      is desired.
+    const: 1
+
   output-ohms:
     description:
       Resistance Rout over which the output voltage is measured. See full-ohms.
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
new file mode 100644
index 000000000000..c15da155d300
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,ada4250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADA4250 Programmable Gain Instrumentation Amplifier
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  Precision Low Power, 110kHz, 26uA, Programmable Gain Instrumentation Amplifier.
+
+properties:
+  compatible:
+    enum:
+      - adi,ada4250
+
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+
+  adi,refbuf-enable:
+    description:
+      Enable internal buffer to drive the reference pin.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      amplifier@0 {
+        compatible = "adi,ada4250";
+        reg = <0>;
+        avdd-supply = <&avdd>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index a557761d8016..3a470459b965 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -4,31 +4,81 @@
 $id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: HMC425A 6-bit Digital Step Attenuator
+title: Analog Devices HMC425A and similar Digital Step Attenuators
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Beniamin Bia <beniamin.bia@analog.com>
 
 description: |
-  Digital Step Attenuator IIO device with gpio interface.
+  Digital Step Attenuator IIO devices with gpio interface.
+  Offer various frequency and attenuation ranges.
+  ADRF5750 2 dB LSB, 4-Bit, Silicon Digital Attenuator, 10 MHz to 60 GHz
+    https://www.analog.com/media/en/technical-documentation/data-sheets/adrf5740.pdf
+
   HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
-  https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
+
+  HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz
+    https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf
+
+  LTC6373 is a 3-Bit precision instrumentation amplifier with fully differential outputs
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6373.pdf
 
 properties:
   compatible:
     enum:
+      - adi,adrf5740
       - adi,hmc425a
+      - adi,hmc540s
+      - adi,ltc6373
 
   vcc-supply: true
 
   ctrl-gpios:
     description:
-      Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
-      connected to the control pins V1-V6.
-    minItems: 6
+      Must contain an array of GPIO specifiers, referring to the GPIO pins
+      connected to the control pins.
+        ADRF5740  - 4 GPIO connected to D2-D5
+        HMC540S   - 4 GPIO connected to V1-V4
+        HMC425A   - 6 GPIO connected to V1-V6
+        LTC6373   - 3 GPIO connected to A0-A2
+    minItems: 1
     maxItems: 6
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,hmc425a
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 6
+          maxItems: 6
+  - if:
+      properties:
+        compatible:
+          contains:
+            anyOf:
+              - const: adi,adrf5740
+              - const: adi,hmc540s
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 4
+          maxItems: 4
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ltc6373
+    then:
+      properties:
+        ctrl-gpios:
+          minItems: 3
+          maxItems: 3
+
 required:
   - compatible
   - ctrl-gpios
diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml
index 2155d3f5666c..3d7074fd17be 100644
--- a/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml
+++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7150.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/cdc/adi,ad7150.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog device AD7150 and similar capacitance to digital convertors.
+title: Analog device AD7150 and similar capacitance to digital converters.
 
 maintainers:
   - Jonathan Cameron <jic23@kernel.org>
diff --git a/Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml b/Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml
new file mode 100644
index 000000000000..35e7b094e878
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/aosong,ags02ma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aosong AGS02MA VOC Sensor
+
+description: |
+  AGS02MA is an TVOC (Total Volatile Organic Compounds) i2c sensor with default
+  address of 0x1a.
+
+  Datasheet:
+    https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - aosong,ags02ma
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        voc-sensor@1a {
+            compatible = "aosong,ags02ma";
+            reg = <0x1a>;
+            vdd-supply = <&vdd_regulator>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml b/Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml
new file mode 100644
index 000000000000..fe98ec44f081
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/bosch,bme680.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/bosch,bme680.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BME680 Gas sensor
+
+maintainers:
+  - Vasileios Amoiridis <vassilisamir@gmail.com>
+
+description: >
+  BME680 is a gas sensor which combines relative humidity, barometric pressure,
+  ambient temperature and gas (VOC - Volatile Organic Compounds) measurements.
+
+  https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme680-ds001.pdf
+
+properties:
+  compatible:
+    const: bosch,bme680
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        co2-sensor@77 {
+            compatible = "bosch,bme680";
+            reg = <0x77>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        co2-sensor@0 {
+            compatible = "bosch,bme680";
+            reg = <0>;
+            spi-max-frequency = <500000>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/chemical/sciosense,ens160.yaml b/Documentation/devicetree/bindings/iio/chemical/sciosense,ens160.yaml
new file mode 100644
index 000000000000..267033a68abb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sciosense,ens160.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sciosense,ens160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ScioSense ENS160 multi-gas sensor
+
+maintainers:
+  - Gustavo Silva <gustavograzs@gmail.com>
+
+description: |
+  Digital Multi-Gas Sensor for Monitoring Indoor Air Quality.
+
+  Datasheet:
+    https://www.sciosense.com/wp-content/uploads/2023/12/ENS160-Datasheet.pdf
+
+properties:
+  compatible:
+    enum:
+      - sciosense,ens160
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      gas-sensor@52 {
+        compatible = "sciosense,ens160";
+        reg = <0x52>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      gas-sensor@0 {
+        compatible = "sciosense,ens160";
+        reg = <0>;
+        spi-max-frequency = <10000000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/chemical/winsen,mhz19b.yaml b/Documentation/devicetree/bindings/iio/chemical/winsen,mhz19b.yaml
new file mode 100644
index 000000000000..2a6ddb33f163
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/winsen,mhz19b.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/winsen,mhz19b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MHZ19B CO2 sensor
+
+maintainers:
+  - Gyeyoung Baek <gye976@gmail.com>
+
+properties:
+  compatible:
+    const: winsen,mhz19b
+
+  vin-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - vin-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+      co2-sensor {
+        compatible = "winsen,mhz19b";
+        vin-supply = <&vdd>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml
index f845b41d74c4..b3a10af86d76 100644
--- a/Documentation/devicetree/bindings/iio/common.yaml
+++ b/Documentation/devicetree/bindings/iio/common.yaml
@@ -12,7 +12,7 @@ maintainers:
 
 description: |
   This document defines device tree properties common to several iio
-  sensors. It doesn't constitue a device tree binding specification by itself but
+  sensors. It doesn't constitute a device tree binding specification by itself but
   is meant to be referenced by device tree bindings.
 
   When referenced from sensor tree bindings the properties defined in this
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml
new file mode 100644
index 000000000000..a355d52a9d64
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3530r.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad3530r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD3530R and Similar DACs
+
+maintainers:
+  - Kim Seer Paller <kimseer.paller@analog.com>
+
+description: |
+  The AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel) are low-power,
+  16-bit, buffered voltage output digital-to-analog converters (DACs) with
+  software-programmable gain controls, providing full-scale output spans of 2.5V
+  or 5V for reference voltages of 2.5V. These devices operate from a single 2.7V
+  to 5.5V supply and are guaranteed monotonic by design. The "R" variants
+  include a 2.5V, 5ppm/°C internal reference, which is disabled by default.
+  Datasheet can be found here:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad3530_ad530r.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad3531-ad3531r.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad3530
+      - adi,ad3530r
+      - adi,ad3531
+      - adi,ad3531r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  vdd-supply:
+    description: Power Supply Input.
+
+  iovdd-supply:
+    description: Digital Power Supply Input.
+
+  io-channels:
+    description:
+      ADC channel used to monitor internal die temperature, output voltages, and
+      current of a selected channel via the MUXOUT pin.
+    maxItems: 1
+
+  ref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin.
+
+  reset-gpios:
+    description:
+      Active low signal that is falling edge sensitive. When it is deasserted,
+      the digital core initialization is performed and all DAC registers except
+      the Interface Configuration A register are reset to their default values.
+    maxItems: 1
+
+  ldac-gpios:
+    description:
+      LDAC pin to be used as a hardware trigger to update the DAC channels. If
+      not present, the DAC channels are updated by Software LDAC.
+    maxItems: 1
+
+  adi,range-double:
+    description:
+      Configure the output range for all channels. If the property is present,
+      the output will range from 0V to 2Vref. If the property is not present,
+      the output will range from 0V to Vref.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - iovdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            compatible = "adi,ad3530r";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+
+            vdd-supply = <&vdd>;
+            iovdd-supply = <&iovdd>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
new file mode 100644
index 000000000000..547044b8e246
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -0,0 +1,248 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2552R DAC device driver
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD3552R DAC device and similar.
+  Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3541r.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3551r.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad3541r
+      - adi,ad3542r
+      - adi,ad3551r
+      - adi,ad3552r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 66000000
+
+  reset-gpios:
+    maxItems: 1
+
+  ldac-gpios:
+    description: |
+      LDAC pin to be used as a hardware trigger to update the DAC channels.
+    maxItems: 1
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exists the
+      internal reference will be used. External reference must be 2.5V
+
+  adi,vref-out-en:
+    description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin
+      will be floating.
+    type: boolean
+
+  adi,sdo-drive-strength:
+    description: |
+      Configure SDIO0 and SDIO1 strength levels:
+        - 0: low SDO drive strength.
+        - 1: medium low SDO drive strength.
+        - 2: medium high SDO drive strength.
+        - 3: high SDO drive strength
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  io-backends:
+    description: The iio backend reference.
+      Device can be optionally connected to the "axi-ad3552r IP" fpga-based
+      QSPI + DDR (Double Data Rate) controller to reach high speed transfers.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-1])$":
+    type: object
+    description: Configurations of the DAC Channels
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Channel number
+        enum: [0, 1]
+
+      adi,output-range-microvolt: true
+
+      custom-output-range-config:
+        type: object
+        additionalProperties: false
+        description: Configuration of custom range when
+          adi,output-range-microvolt is not present.
+          The formulas for calculation the output voltages are
+            Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03]
+            Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03]
+
+        properties:
+          adi,gain-offset:
+            description: Gain offset used in the above formula
+            $ref: /schemas/types.yaml#/definitions/int32
+            maximum: 511
+            minimum: -511
+
+          adi,gain-scaling-p:
+            description: GainP = 1 / ( 2 ^ adi,gain-scaling-p)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,gain-scaling-n:
+            description: GainN = 1 / ( 2 ^ adi,gain-scaling-n)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,rfb-ohms:
+            description: Feedback Resistor
+
+        required:
+          - adi,gain-offset
+          - adi,gain-scaling-p
+          - adi,gain-scaling-n
+          - adi,rfb-ohms
+
+    required:
+      - reg
+
+    oneOf:
+      # If adi,output-range-microvolt is missing,
+      # custom-output-range-config must be used
+      - required:
+          - adi,output-range-microvolt
+
+      - required:
+          - custom-output-range-config
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad3541r
+              - adi,ad3542r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; -2.5 to 7.5V; -5 to 5 V;
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 3000000, 5000000, 10000000]
+                - items:
+                    - const: -2500000
+                    - const: 7500000
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+
+          required:
+            - adi,output-range-microvolt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad3551r
+              - adi,ad3552r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; -5 to 5 V;
+                  Rfb4x for: -10 to 10V
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 5000000, 10000000]
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+                - items:
+                    - const: -10000000
+                    - const: 10000000
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad3541r
+              - adi,ad3551r
+    then:
+      properties:
+        channel@1: false
+        channel@0:
+          properties:
+            reg:
+              const: 0
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ad3552r@0 {
+            compatible = "adi,ad3552r";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                adi,output-range-microvolt = <0 10000000>;
+            };
+            channel@1 {
+                reg = <1>;
+                custom-output-range-config {
+                    adi,gain-offset = <5>;
+                    adi,gain-scaling-p = <1>;
+                    adi,gain-scaling-n = <2>;
+                    adi,rfb-ohms = <1>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
index 05ed4e0ec364..c04165fa9259 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
@@ -95,15 +95,12 @@ properties:
   vrefD-supply: true
   vref-supply: true
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - # Shared external vref, no internal reference
     if:
       properties:
@@ -232,6 +229,8 @@ allOf:
         - vrefA-supply
         - vrefB-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
index 0d8fb56f4b09..86e2884cdfb1 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
@@ -28,10 +28,6 @@ properties:
   vref1-supply: true
   vref2-supply: true
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -39,6 +35,7 @@ required:
   - vref1-supply
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -59,9 +56,11 @@ allOf:
           contains:
             enum:
               - adi,ad5371
-      then:
-        required:
-          - vref2-supply
+    then:
+      required:
+        - vref2-supply
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
index d599b418a020..3e323f1a5458 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
@@ -12,6 +12,7 @@ maintainers:
 
 description: |
   DAC devices supporting both SPI and I2C interfaces.
+
 properties:
   compatible:
     enum:
@@ -39,32 +40,33 @@ properties:
     description:
       If not supplied devices will use internal regulators.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
         dac@0 {
-           reg = <0>;
-           compatible = "adi,ad5390-5";
-           vref-supply = <&dacvref>;
+            reg = <0>;
+            compatible = "adi,ad5390-5";
+            vref-supply = <&dacvref>;
         };
     };
   - |
     i2c {
-       #address-cells = <1>;
-       #size-cells = <0>;
-       dac@42 {
-          reg = <0x42>;
-          compatible = "adi,ad5380-3";
-       };
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@42 {
+            reg = <0x42>;
+            compatible = "adi,ad5380-3";
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
index 188f656617e3..52d089ebde95 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
@@ -26,13 +26,14 @@ properties:
     maxItems: 1
     description: Fault signal.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml
new file mode 100644
index 000000000000..2669d2c4948b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5446.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5446 and similar DACs
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
+
+description:
+  Digital to Analog Converter devices supporting both SPI and I2C interfaces.
+  These devices feature a range of resolutions from 8-bit to 16-bit.
+
+properties:
+  compatible:
+    oneOf:
+      - description: SPI DACs
+        enum:
+          - adi,ad5300
+          - adi,ad5310
+          - adi,ad5320
+          - adi,ad5444
+          - adi,ad5446
+          - adi,ad5450
+          - adi,ad5451
+          - adi,ad5452
+          - adi,ad5453
+          - adi,ad5512a
+          - adi,ad5541a
+          - adi,ad5542
+          - adi,ad5542a
+          - adi,ad5543
+          - adi,ad5553
+          - adi,ad5600
+          - adi,ad5601
+          - adi,ad5611
+          - adi,ad5621
+          - adi,ad5641
+          - adi,ad5620-2500
+          - adi,ad5620-1250
+          - adi,ad5640-2500
+          - adi,ad5640-1250
+          - adi,ad5660-2500
+          - adi,ad5660-1250
+          - adi,ad5662
+          - ti,dac081s101
+          - ti,dac101s101
+          - ti,dac121s101
+      - description: I2C DACs
+        enum:
+          - adi,ad5301
+          - adi,ad5311
+          - adi,ad5321
+          - adi,ad5602
+          - adi,ad5612
+          - adi,ad5622
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      Reference voltage supply. If not supplied, devices with internal
+      voltage reference will use that.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ad5300
+              - adi,ad5310
+              - adi,ad5320
+              - adi,ad5444
+              - adi,ad5446
+              - adi,ad5450
+              - adi,ad5451
+              - adi,ad5452
+              - adi,ad5453
+              - adi,ad5512a
+              - adi,ad5541a
+              - adi,ad5542
+              - adi,ad5542a
+              - adi,ad5543
+              - adi,ad5553
+              - adi,ad5600
+              - adi,ad5601
+              - adi,ad5611
+              - adi,ad5621
+              - adi,ad5641
+              - adi,ad5620-2500
+              - adi,ad5620-1250
+              - adi,ad5640-2500
+              - adi,ad5640-1250
+              - adi,ad5660-2500
+              - adi,ad5660-1250
+              - adi,ad5662
+              - ti,dac081s101
+              - ti,dac101s101
+              - ti,dac121s101
+    then:
+      allOf:
+        - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad5446";
+            reg = <0>;
+            vcc-supply = <&dac_vref>;
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@42 {
+            compatible = "adi,ad5622";
+            reg = <0x42>;
+            vcc-supply = <&dac_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
index 044332c97743..d2af2d491986 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
@@ -27,19 +27,16 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   VREF-supply: true
   VREFA-supply: true
   VREFB-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -72,6 +69,8 @@ allOf:
         - VREFA-supply
         - VREFB-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
index 330383b85eeb..4d5111a5f9bd 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
@@ -22,17 +22,18 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: If not present, internal reference will be used.
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
index 5c26441eae9f..713f535bb33a 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/dac/adi,ad5686.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AD5360 and similar DACs
+title: Analog Devices AD5360 and similar SPI DACs
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
@@ -12,40 +12,22 @@ maintainers:
 
 properties:
   compatible:
-    oneOf:
-      - description: SPI devices
-        enum:
-          - adi,ad5310r
-          - adi,ad5672r
-          - adi,ad5674r
-          - adi,ad5676
-          - adi,ad5676r
-          - adi,ad5679r
-          - adi,ad5681r
-          - adi,ad5682r
-          - adi,ad5683
-          - adi,ad5683r
-          - adi,ad5684
-          - adi,ad5684r
-          - adi,ad5685r
-          - adi,ad5686
-          - adi,ad5686r
-      - description: I2C devices
-        enum:
-          - adi,ad5311r
-          - adi,ad5338r
-          - adi,ad5671r
-          - adi,ad5675r
-          - adi,ad5691r
-          - adi,ad5692r
-          - adi,ad5693
-          - adi,ad5693r
-          - adi,ad5694
-          - adi,ad5694r
-          - adi,ad5695r
-          - adi,ad5696
-          - adi,ad5696r
-
+    enum:
+      - adi,ad5310r
+      - adi,ad5672r
+      - adi,ad5674r
+      - adi,ad5676
+      - adi,ad5676r
+      - adi,ad5679r
+      - adi,ad5681r
+      - adi,ad5682r
+      - adi,ad5683
+      - adi,ad5683r
+      - adi,ad5684
+      - adi,ad5684r
+      - adi,ad5685r
+      - adi,ad5686
+      - adi,ad5686r
 
   reg:
     maxItems: 1
@@ -53,14 +35,15 @@ properties:
   vcc-supply:
     description: If not supplied the internal reference is used.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml
index 56b0cda0f30a..b5a88b03dc2f 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5696.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/dac/adi,ad5696.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AD5696 and similar multi-channel DACs
+title: Analog Devices AD5696 and similar I2C multi-channel DACs
 
 maintainers:
   - Michael Auchter <michael.auchter@ni.com>
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - adi,ad5311r
+      - adi,ad5337r
       - adi,ad5338r
       - adi,ad5671r
       - adi,ad5675r
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
index be419ac46caa..9a3c2926bf85 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
@@ -25,8 +25,6 @@ properties:
     description: Either this or spi-cpol but not both.
   spi-cpol: true
 
-  spi-max-frequency: true
-
   adi,ext-dc-dc-compenstation-resistor:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -67,8 +65,6 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
-
 patternProperties:
   "^channel@[0-7]$":
     type: object
@@ -123,9 +119,13 @@ oneOf:
   - required:
       - spi-cpol
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
-    #include <dt-bindings/iio/adi,ad5592r.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
index fd4edca34a28..5121685337b5 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
@@ -16,7 +16,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
 
   adi,dc-dc-mode:
@@ -79,7 +78,8 @@ properties:
           - const: -1000
           - const: 22000
 
-  reset-gpios: true
+  reset-gpios:
+    maxItems: 1
 
   adi,dc-dc-ilim-microamp:
     enum: [150000, 200000, 250000, 300000, 350000, 400000]
@@ -99,11 +99,11 @@ required:
   - adi,dc-dc-mode
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         adi,dc-dc-mode:
-          contains:
-            enum: [1, 3]
+          enum: [1, 3]
     then:
       properties:
         adi,range-microvolt: false
@@ -115,7 +115,7 @@ allOf:
       required:
         - adi,range-microvolt
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
index 7f95a9ed55fe..df550b5af2f7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
@@ -22,18 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: If not supplied, internal reference will be used.
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -45,6 +42,8 @@ allOf:
       required:
         - vref-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
index 8e893d52bfb1..0b409a727a43 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
@@ -22,18 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vrefAB-supply: true
   vrefCD-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -46,6 +43,8 @@ allOf:
         - vrefAB-supply
         - vrefCD-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
index a8f7720d1e3e..212c936bab8d 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD5766 DAC device driver
 
 maintainers:
-  - Cristian Pop <cristian.pop@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 description: |
   Bindings for the Analog Devices AD5766 current DAC device. Datasheet can be
@@ -22,6 +22,8 @@ properties:
       - adi,ad5767
 
   output-range-microvolts:
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    maxItems: 2
     description: Select converter output range.
 
   reg:
@@ -49,15 +51,15 @@ additionalProperties: false
 examples:
   - |
     spi {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          ad5766@0 {
-              compatible = "adi,ad5766";
-              output-range-microvolts = <(-5000000) 5000000>;
-              reg = <0>;
-              spi-cpol;
-              spi-max-frequency = <1000000>;
-              reset-gpios = <&gpio 22 0>;
-            };
-      };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ad5766@0 {
+            compatible = "adi,ad5766";
+            output-range-microvolts = <(-5000000) 5000000>;
+            reg = <0>;
+            spi-cpol;
+            spi-max-frequency = <1000000>;
+            reset-gpios = <&gpio 22 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index fb2c48fc7ce4..091cc93f1f90 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -8,7 +8,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD5770R DAC device driver
 
 maintainers:
-  - Mircea Caprioru <mircea.caprioru@analog.com>
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 description: |
   Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be
@@ -49,8 +50,6 @@ properties:
       asserted during driver probe.
     maxItems: 1
 
-  spi-max-frequency: true
-
   '#address-cells':
     const: 1
 
@@ -62,6 +61,7 @@ properties:
       connected to the DAC. Channel 0 can act both as a current
       source and sink.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -85,6 +85,7 @@ properties:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -101,6 +102,7 @@ properties:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -116,6 +118,7 @@ properties:
 patternProperties:
   "^channel@([3-5])$":
     type: object
+    additionalProperties: false
     description: Represents the external channels which are connected to the DAC.
     properties:
       reg:
@@ -138,53 +141,56 @@ required:
   - channel@4
   - channel@5
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-        spi {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                ad5770r@0 {
-                        compatible = "adi,ad5770r";
-                        reg = <0>;
-                        spi-max-frequency = <1000000>;
-                        vref-supply = <&vref>;
-                        adi,external-resistor;
-                        reset-gpios = <&gpio 22 0>;
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        channel@0 {
-                                reg = <0>;
-                                adi,range-microamp = <0 300000>;
-                        };
-
-                        channel@1 {
-                                reg = <1>;
-                                adi,range-microamp = <0 140000>;
-                        };
-
-                        channel@2 {
-                                reg = <2>;
-                                adi,range-microamp = <0 55000>;
-                        };
-
-                        channel@3 {
-                                reg = <3>;
-                                adi,range-microamp = <0 45000>;
-                        };
-
-                        channel@4 {
-                                reg = <4>;
-                                adi,range-microamp = <0 45000>;
-                        };
-
-                        channel@5 {
-                                reg = <5>;
-                                adi,range-microamp = <0 45000>;
-                        };
-                };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ad5770r@0 {
+            compatible = "adi,ad5770r";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            vref-supply = <&vref>;
+            adi,external-resistor;
+            reset-gpios = <&gpio 22 0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                adi,range-microamp = <0 300000>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                adi,range-microamp = <0 140000>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                adi,range-microamp = <0 55000>;
+            };
+
+            channel@3 {
+                reg = <3>;
+                adi,range-microamp = <0 45000>;
+            };
+
+            channel@4 {
+                reg = <4>;
+                adi,range-microamp = <0 45000>;
+            };
+
+            channel@5 {
+                reg = <5>;
+                adi,range-microamp = <0 45000>;
+            };
         };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
index 650d1ebdcec3..2bd89e0aa46b 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -23,21 +23,59 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
   vss-supply: true
 
-additionalProperties: false
+  vcc-supply:
+    description:
+      Supply that powers the chip.
+
+  iovcc-supply:
+    description:
+      Supply for the digital interface.
+
+  vrefp-supply:
+    description:
+      Positive referance input voltage range. From 5v to (vdd - 2.5)
+
+  vrefn-supply:
+    description:
+      Negative referance input voltage range. From (vss + 2.5) to 0.
+
+  adi,rbuf-gain2-en:
+    description: Specify to allow an external amplifier to be connected in a
+      gain of two configuration.
+    type: boolean
+
+  reset-gpios:
+    maxItems: 1
+
+  clear-gpios:
+    maxItems: 1
+
+  ldac-gpios:
+    description:
+      LDAC pin to be used as a hardware trigger to update the DAC channels.
+    maxItems: 1
 
 required:
   - compatible
   - reg
   - vdd-supply
   - vss-supply
+  - vcc-supply
+  - iovcc-supply
+  - vrefp-supply
+  - vrefn-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -47,6 +85,13 @@ examples:
             reg = <0>;
             vss-supply = <&dac_vss>;
             vdd-supply = <&dac_vdd>;
+            vcc-supply = <&dac_vcc>;
+            iovcc-supply = <&dac_iovcc>;
+            vrefp-supply = <&dac_vrefp>;
+            vrefn-supply = <&dac_vrefn>;
+            reset-gpios = <&gpio_bd 16 GPIO_ACTIVE_LOW>;
+            clear-gpios = <&gpio_bd 17 GPIO_ACTIVE_LOW>;
+            ldac-gpios = <&gpio_bd 18 GPIO_ACTIVE_LOW>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
new file mode 100644
index 000000000000..f994c1ef6d41
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad7293.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7293 12-Bit Power Amplifier Current Controller with ADC,
+       DACs, Temperature and Current Sensors
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Power Amplifier drain current controller containing functionality
+   for general-purpose monitoring and control of current, voltage,
+   and temperature, integrated into a single chip solution with an
+   SPI-compatible interface.
+
+   https://www.analog.com/en/products/ad7293.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7293
+
+  avdd-supply: true
+
+  vdrive-supply: true
+
+  vrefin-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vdrive-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ad7293@0 {
+        compatible = "adi,ad7293";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        avdd-supply = <&avdd>;
+        vdrive-supply = <&vdrive>;
+        reset-gpios = <&gpio 10 0>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
new file mode 100644
index 000000000000..b65928024e12
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad8460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD8460 DAC
+
+maintainers:
+  - Mariel Tinaco <mariel.tinaco@analog.com>
+
+description: |
+  Analog Devices AD8460 110 V High Voltage, 1 A High Current,
+  Arbitrary Waveform Generator with Integrated 14-Bit High Speed DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad8460.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad8460
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+
+  spi-max-frequency:
+    maximum: 20000000
+
+  hvcc-supply:
+    description: Positive high voltage power supply line
+
+  hvee-supply:
+    description: Negative high voltage power supply line
+
+  vcc-5v-supply:
+    description: Low voltage power supply
+
+  vref-5v-supply:
+    description: Reference voltage for analog low voltage
+
+  dvdd-3p3v-supply:
+    description: Digital supply bypass
+
+  avdd-3p3v-supply:
+    description: Analog supply bypass
+
+  refio-1p2v-supply:
+    description: Drive voltage in the range of 1.2V maximum to as low as
+      low as 0.12V through the REF_IO pin to adjust full scale output span
+
+  adi,external-resistor-ohms:
+    description: Specify value of external resistor connected to FS_ADJ pin
+      to establish internal HVDAC's reference current I_REF
+    minimum: 2000
+    maximum: 20000
+    default: 2000
+
+  adi,range-microvolt:
+    description: Voltage output range specified as <minimum, maximum>
+    items:
+      - minimum: -55000000
+        maximum: 0
+        default: 0
+      - minimum: 0
+        maximum: 55000000
+        default: 0
+
+  adi,range-microamp:
+    description: Current output range specified as <minimum, maximum>
+    items:
+      - minimum: -1000000
+        maximum: 0
+        default: 0
+      - minimum: 0
+        maximum: 1000000
+        default: 0
+
+  adi,max-millicelsius:
+    description: Overtemperature threshold
+    minimum: 0
+    maximum: 150000
+    default: 0
+
+  shutdown-reset-gpios:
+    description: Corresponds to SDN_RESET pin. To exit shutdown
+      or sleep mode, pulse SDN_RESET HIGH, then leave LOW.
+    maxItems: 1
+
+  reset-gpios:
+    description: Manual Power On Reset (POR). Pull this GPIO pin
+      LOW and then HIGH to reset all digital registers to default
+    maxItems: 1
+
+  shutdown-gpios:
+    description: Corresponds to SDN_IO pin. Shutdown may be
+      initiated by the user, by pulsing SDN_IO high. To exit shutdown,
+      pulse SDN_IO low, then float.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - hvcc-supply
+  - hvee-supply
+  - vcc-5v-supply
+  - vref-5v-supply
+  - dvdd-3p3v-supply
+  - avdd-3p3v-supply
+  - refio-1p2v-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad8460";
+            reg = <0>;
+            spi-max-frequency = <8000000>;
+
+            dmas = <&tx_dma 0>;
+            dma-names = "tx";
+
+            shutdown-reset-gpios = <&gpio 86 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+            shutdown-gpios = <&gpio 88 GPIO_ACTIVE_HIGH>;
+
+            clocks = <&sync_ext_clk>;
+
+            hvcc-supply = <&hvcc>;
+            hvee-supply = <&hvee>;
+            vcc-5v-supply = <&vcc_5>;
+            vref-5v-supply = <&vref_5>;
+            dvdd-3p3v-supply = <&dvdd_3_3>;
+            avdd-3p3v-supply = <&avdd_3_3>;
+            refio-1p2v-supply = <&refio_1_2>;
+
+            adi,external-resistor-ohms = <2000>;
+            adi,range-microvolt = <(-40000000) 40000000>;
+            adi,range-microamp = <0 50000>;
+            adi,max-millicelsius = <50000>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
index 6a3990a8d0ad..1849a2ff05c7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
@@ -19,19 +19,16 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vrefh-supply: true
   vrefl-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vrefh-supply
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -44,6 +41,8 @@ allOf:
       properties:
         vrefl-supply: false
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml
new file mode 100644
index 000000000000..c0b36476113a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad9739a.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad9739a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD9739A RF DAC
+
+maintainers:
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  The AD9739A is a 14-bit, 2.5 GSPS high performance RF DACs that are capable
+  of synthesizing wideband signals from dc up to 3 GHz.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad9737a_9739a.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad9739a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-3p3-supply:
+    description: 3.3V Digital input supply.
+
+  vdd-supply:
+    description: 1.8V Digital input supply.
+
+  vdda-supply:
+    description: 3.3V Analog input supply.
+
+  vddc-supply:
+    description: 1.8V Clock input supply.
+
+  vref-supply:
+    description: Input/Output reference supply.
+
+  io-backends:
+    maxItems: 1
+
+  adi,full-scale-microamp:
+    description: This property represents the DAC full scale current.
+    minimum: 8580
+    maximum: 31700
+    default: 20000
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - io-backends
+  - vdd-3p3-supply
+  - vdd-supply
+  - vdda-supply
+  - vddc-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad9739a";
+            reg = <0>;
+
+            clocks = <&dac_clk>;
+
+            io-backends = <&iio_backend>;
+
+            vdd-3p3-supply = <&vdd_3_3>;
+            vdd-supply = <&vdd>;
+            vdda-supply = <&vdd_3_3>;
+            vddc-supply = <&vdd>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
new file mode 100644
index 000000000000..1adba9aceeb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,axi-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AXI DAC IP core
+
+maintainers:
+  - Nuno Sa <nuno.sa@analog.com>
+
+description: |
+  Analog Devices Generic AXI DAC IP core for interfacing a DAC device
+  with a high speed serial (JESD204B/C) or source synchronous parallel
+  interface (LVDS/CMOS).
+  Usually, some other interface type (i.e SPI) is used as a control
+  interface for the actual DAC, while this IP core will interface
+  to the data-lines of the DAC and handle the streaming of data from
+  memory via DMA into the DAC.
+
+  https://wiki.analog.com/resources/fpga/docs/axi_dac_ip
+  https://analogdevicesinc.github.io/hdl/library/axi_ad3552r/index.html
+
+properties:
+  compatible:
+    enum:
+      - adi,axi-dac-9.1.b
+      - adi,axi-ad3552r
+
+  reg:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: tx
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: s_axi_aclk
+      - const: dac_clk
+    minItems: 1
+
+  '#io-backend-cells':
+    const: 0
+
+required:
+  - compatible
+  - dmas
+  - reg
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,axi-ad3552r
+    then:
+      $ref: /schemas/spi/spi-controller.yaml#
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          minItems: 2
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dac@44a00000 {
+        compatible = "adi,axi-dac-9.1.b";
+        reg = <0x44a00000 0x10000>;
+        dmas = <&tx_dma 0>;
+        dma-names = "tx";
+        #io-backend-cells = <0>;
+        clocks = <&clkc 15>;
+        clock-names = "s_axi_aclk";
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    axi_dac: spi@44a70000 {
+        compatible = "adi,axi-ad3552r";
+        reg = <0x44a70000 0x1000>;
+        dmas = <&dac_tx_dma 0>;
+        dma-names = "tx";
+        #io-backend-cells = <0>;
+        clocks = <&clkc 15>, <&ref_clk>;
+        clock-names = "s_axi_aclk", "dac_clk";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "adi,ad3552r";
+            reg = <0>;
+            reset-gpios = <&gpio0 92 GPIO_ACTIVE_HIGH>;
+            io-backends = <&axi_dac>;
+            spi-max-frequency = <20000000>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                adi,output-range-microvolt = <(-10000000) (10000000)>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
new file mode 100644
index 000000000000..4688eccfeb89
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2664.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2664 DAC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Kim Seer Paller <kimseer.paller@analog.com>
+
+description: |
+  Analog Devices LTC2664 4 channel, 12-/16-Bit, +-10V DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2664fa.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2664
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  vcc-supply:
+    description: Analog Supply Voltage Input.
+
+  v-pos-supply:
+    description: Positive Supply Voltage Input.
+
+  v-neg-supply:
+    description: Negative Supply Voltage Input.
+
+  iovcc-supply:
+    description: Digital Input/Output Supply Voltage.
+
+  ref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin.
+
+  reset-gpios:
+    description:
+      Active-low Asynchronous Clear Input. A logic low at this level-triggered
+      input clears the part to the reset code and range determined by the
+      hardwired option chosen using the MSPAN pins. The control registers are
+      cleared to zero.
+    maxItems: 1
+
+  adi,manual-span-operation-config:
+    description:
+      This property must mimic the MSPAN pin configurations. By tying the MSPAN
+      pins (MSP2, MSP1 and MSP0) to GND and/or VCC, any output range can be
+      hardware-configured with different mid-scale or zero-scale reset options.
+      The hardware configuration is latched during power on reset for proper
+      operation.
+        0 - MPS2=GND, MPS1=GND, MSP0=GND (+-10V, reset to 0V)
+        1 - MPS2=GND, MPS1=GND, MSP0=VCC (+-5V, reset to 0V)
+        2 - MPS2=GND, MPS1=VCC, MSP0=GND (+-2.5V, reset to 0V)
+        3 - MPS2=GND, MPS1=VCC, MSP0=VCC (0V to 10, reset to 0V)
+        4 - MPS2=VCC, MPS1=GND, MSP0=GND (0V to 10V, reset to 5V)
+        5 - MPS2=VCC, MPS1=GND, MSP0=VCC (0V to 5V, reset to 0V)
+        6 - MPS2=VCC, MPS1=VCC, MSP0=GND (0V to 5V, reset to 2.5V)
+        7 - MPS2=VCC, MPS1=VCC, MSP0=VCC (0V to 5V, reset to 0V, enables SoftSpan)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7]
+    default: 7
+
+  io-channels:
+    description:
+      ADC channel to monitor voltages and temperature at the MUXOUT pin.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@[0-3]$":
+    $ref: dac.yaml
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: The channel number representing the DAC output channel.
+        maximum: 3
+
+      adi,toggle-mode:
+        description:
+          Set the channel as a toggle enabled channel. Toggle operation enables
+          fast switching of a DAC output between two different DAC codes without
+          any SPI transaction.
+        type: boolean
+
+      output-range-microvolt:
+        description:
+          This property is only allowed when SoftSpan is enabled. If not present,
+          [0, 5000000] is the default output range.
+        oneOf:
+          - items:
+              - const: 0
+              - enum: [5000000, 10000000]
+          - items:
+              - const: -5000000
+              - const: 5000000
+          - items:
+              - const: -10000000
+              - const: 10000000
+          - items:
+              - const: -2500000
+              - const: 2500000
+
+    required:
+      - reg
+
+    allOf:
+      - if:
+          not:
+            properties:
+              adi,manual-span-operation-config:
+                const: 7
+        then:
+          patternProperties:
+            "^channel@[0-3]$":
+              properties:
+                output-range-microvolt: false
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - vcc-supply
+  - iovcc-supply
+  - v-pos-supply
+  - v-neg-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            compatible = "adi,ltc2664";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+
+            vcc-supply = <&vcc>;
+            iovcc-supply = <&vcc>;
+            ref-supply = <&vref>;
+            v-pos-supply = <&vpos>;
+            v-neg-supply = <&vneg>;
+
+            io-channels = <&adc 0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                adi,toggle-mode;
+                output-range-microvolt = <(-10000000) 10000000>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                output-range-microvolt = <0 10000000>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
new file mode 100644
index 000000000000..3c8e5781e42c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2672.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2672 DAC
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Kim Seer Paller <kimseer.paller@analog.com>
+
+description: |
+  Analog Devices LTC2672 5 channel, 12-/16-Bit, 300mA DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2672.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2672
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  vcc-supply:
+    description: Analog Supply Voltage Input.
+
+  v-neg-supply:
+    description: Negative Supply Voltage Input.
+
+  vdd0-supply:
+    description: Positive Supply Voltage Input for DAC OUT0.
+
+  vdd1-supply:
+    description: Positive Supply Voltage Input for DAC OUT1.
+
+  vdd2-supply:
+    description: Positive Supply Voltage Input for DAC OUT2.
+
+  vdd3-supply:
+    description: Positive Supply Voltage Input for DAC OUT3.
+
+  vdd4-supply:
+    description: Positive Supply Voltage Input for DAC OUT4.
+
+  iovcc-supply:
+    description: Digital Input/Output Supply Voltage.
+
+  ref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin.
+
+  reset-gpios:
+    description:
+      Active Low Asynchronous Clear Input. A logic low at this level triggered
+      input clears the device to the default reset code and output range, which
+      is zero-scale with the outputs off. The control registers are cleared to
+      zero.
+    maxItems: 1
+
+  adi,rfsadj-ohms:
+    description:
+      If FSADJ is tied to VCC, an internal RFSADJ (20 kΩ) is selected, which
+      results in nominal output ranges. When an external resistor of 19 kΩ to
+      41 kΩ can be used instead by connecting the resistor between FSADJ and GND
+      it controls the scaling of the ranges, and the internal resistor is
+      automatically disconnected.
+    minimum: 19000
+    maximum: 41000
+    default: 20000
+
+  io-channels:
+    description:
+      ADC channel to monitor voltages and currents at the MUX pin.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@[0-4]$":
+    $ref: dac.yaml
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: The channel number representing the DAC output channel.
+        maximum: 4
+
+      adi,toggle-mode:
+        description:
+          Set the channel as a toggle enabled channel. Toggle operation enables
+          fast switching of a DAC output between two different DAC codes without
+          any SPI transaction.
+        type: boolean
+
+      output-range-microamp:
+        items:
+          - const: 0
+          - enum: [3125000, 6250000, 12500000, 25000000, 50000000, 100000000,
+                   200000000, 300000000]
+
+    required:
+      - reg
+      - output-range-microamp
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - vcc-supply
+  - iovcc-supply
+  - v-neg-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        dac@0 {
+            compatible = "adi,ltc2672";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+
+            vcc-supply = <&vcc>;
+            iovcc-supply = <&vcc>;
+            ref-supply = <&vref>;
+            v-neg-supply = <&vneg>;
+
+            io-channels = <&adc 0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                adi,toggle-mode;
+                output-range-microamp = <0 3125000>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                output-range-microamp = <0 6250000>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
new file mode 100644
index 000000000000..f22ef710ecde
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2688 DAC
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC2688 16 channel, 16 bit, +-15V DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2688.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2688
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Analog Supply Voltage Input.
+
+  iovcc-supply:
+    description: Digital Input/Output Supply Voltage.
+
+  vref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin".
+
+  clr-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: The channel number representing the DAC output channel.
+        maximum: 15
+
+      adi,toggle-mode:
+        description:
+          Set the channel as a toggle enabled channel. Toggle operation enables
+          fast switching of a DAC output between two different DAC codes without
+          any SPI transaction.
+        type: boolean
+
+      adi,output-range-microvolt:
+        description: Specify the channel output full scale range.
+        oneOf:
+          - items:
+              - const: 0
+              - enum: [5000000, 10000000]
+          - items:
+              - const: -5000000
+              - const: 5000000
+          - items:
+              - const: -10000000
+              - const: 10000000
+          - items:
+              - const: -15000000
+              - const: 15000000
+
+      adi,overrange:
+        description: Enable 5% overrange over the selected full scale range.
+        type: boolean
+
+      clocks:
+        maxItems: 1
+
+      adi,toggle-dither-input:
+        description:
+          Selects the TGPx pin to be associated with this channel. This setting
+          only makes sense for toggle or dither enabled channels. If
+          @adi,toggle-mode is not set and this property is given, the channel is
+          assumed to be a dither capable channel. Note that multiple channels
+          can be mapped to the same pin. If this setting is given, the
+          respective @clock must also be provided. Mappings between this and
+          input pins
+            0 - TGP1
+            1 - TGP2
+            2 - TGP3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+    dependencies:
+      adi,toggle-dither-input: [ clocks ]
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ltc2688: ltc2688@0 {
+            compatible = "adi,ltc2688";
+            reg = <0>;
+
+            vcc-supply = <&vcc>;
+            iovcc-supply = <&vcc>;
+            vref-supply = <&vref>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                adi,toggle-mode;
+                adi,overrange;
+            };
+
+            channel@1 {
+                reg = <1>;
+                adi,output-range-microvolt = <0 10000000>;
+
+                clocks = <&clock_tgp3>;
+                adi,toggle-dither-input = <2>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/dac.yaml b/Documentation/devicetree/bindings/iio/dac/dac.yaml
new file mode 100644
index 000000000000..daa40724e1cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/dac.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IIO Common Properties for DAC Channels
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description:
+  A few properties are defined in a common way for DAC channels.
+
+properties:
+  $nodename:
+    pattern: "^channel(@[0-9a-f]+)?$"
+    description:
+      A channel index should match reg.
+
+  reg:
+    maxItems: 1
+
+  label:
+    description: Unique name to identify which channel this is.
+
+  output-range-microamp:
+    maxItems: 2
+    minItems: 2
+    description:
+      Specify the channel output full scale range in microamperes.
+
+  output-range-microvolt:
+    maxItems: 2
+    minItems: 2
+    description:
+      Specify the channel output full scale range in microvolts.
+
+anyOf:
+  - oneOf:
+      - required:
+          - reg
+          - output-range-microamp
+      - required:
+          - reg
+          - output-range-microvolt
+  - required:
+      - reg
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
index e51a585bd5a3..c9f51d00fa8f 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs
 
@@ -41,7 +41,7 @@ examples:
     spi {
       #address-cells = <1>;
       #size-cells = <0>;
-  
+
       dac@0 {
         compatible = "lltc,ltc1660";
         reg = <0>;
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
index edf804d0aca2..733edc7d6d17 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
 
@@ -64,14 +64,14 @@ examples:
     };
 
     spi {
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-      dac@0 {
-        compatible = "lltc,ltc2632";
-        reg = <0>;    /* CS0 */
-        spi-max-frequency = <1000000>;
-        vref-supply = <&vref>;
-      };
+        dac@0 {
+            compatible = "lltc,ltc2632-l12";
+            reg = <0>;    /* CS0 */
+            spi-max-frequency = <1000000>;
+            vref-supply = <&vref>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml
new file mode 100644
index 000000000000..24830f56c501
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/maxim,max5522.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX5522 Dual 10-bit Voltage-Output SPI DACs
+
+maintainers:
+  - Angelo Dureghello <angelo.dureghello@timesys.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Datasheet available at:
+  https://www.analog.com/en/products/max5522.html
+
+properties:
+  compatible:
+    const: maxim,max5522
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vrefin-supply: true
+
+required:
+  - compatible
+  - reg
+  - vrefin-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "maxim,max5522";
+            reg = <0>;
+            vrefin-supply = <&vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml
new file mode 100644
index 000000000000..99831d7f1c16
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4728.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4728.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4728 DAC
+
+maintainers:
+  - Andrea Collamati <andrea.collamati@gmail.com>
+
+description: |
+  MCP4728 is a quad channel, 12-bit voltage output
+  Digital-to-Analog Converter with non-volatile
+  memory and I2C compatible Serial Interface.
+  https://www.microchip.com/en-us/product/mcp4728
+
+properties:
+  compatible:
+    const: microchip,mcp4728
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: |
+      Provides both power and acts as the reference supply on the MCP4728
+      when Internal Vref is not selected.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@60 {
+            compatible = "microchip,mcp4728";
+            reg = <0x60>;
+            vdd-supply = <&vdac_vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml
new file mode 100644
index 000000000000..26011b5639d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4821.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP4821 and similar DACs
+
+description: |
+  Supports MCP48x1 (single channel) and MCP48x2 (dual channel) series of DACs.
+  Device supports simplex communication over SPI in Mode 0 and Mode 3.
+
+  +---------+--------------+-------------+
+  | Device  |  Resolution  |   Channels  |
+  |---------|--------------|-------------|
+  | MCP4801 |     8-bit    |      1      |
+  | MCP4802 |     8-bit    |      2      |
+  | MCP4811 |    10-bit    |      1      |
+  | MCP4812 |    10-bit    |      2      |
+  | MCP4821 |    12-bit    |      1      |
+  | MCP4822 |    12-bit    |      2      |
+  +---------+--------------+-------------+
+
+  Datasheet:
+    MCP48x1: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf
+    MCP48x2: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp4801
+      - microchip,mcp4802
+      - microchip,mcp4811
+      - microchip,mcp4812
+      - microchip,mcp4821
+      - microchip,mcp4822
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  ldac-gpios:
+    description: |
+      Active Low LDAC (Latch DAC Input) pin used to update the DAC output.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: |
+      Active Low SHDN pin used to enter the shutdown mode.
+    maxItems: 1
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "microchip,mcp4821";
+            reg = <0>;
+            vdd-supply = <&vdd_regulator>;
+            ldac-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+            powerdown-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+            spi-cpha;
+            spi-cpol;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
index 12a14b3f36cb..19374401e509 100644
--- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
@@ -15,22 +15,24 @@ properties:
     enum:
       - microchip,mcp4902
       - microchip,mcp4912
+      - microchip,mcp4921
       - microchip,mcp4922
 
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vref-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml b/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml
index 595f481c548e..9c8afe3f1b69 100644
--- a/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/dac/nxp,lpc1850-dac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP LPC1850 DAC bindings
+title: NXP LPC1850 DAC
 
 maintainers:
   - Jonathan Cameron <jic23@kernel.org>
diff --git a/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml b/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml
new file mode 100644
index 000000000000..c00fa50e42e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/rohm,bd79703.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2024 ROHM Semiconductor.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/rohm,bd79703.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD79700, BD79701, BD79702 and BD79703 DACs
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  The ROHM BD7970[0,1,2,3] are 8-bit DACs. The BD79700 has 2 channels,
+  BD79701 3 channels, BD79702 4 channels and BD79703 has 6 channels.
+  Datasheets for BD79702 and BD79703 can be found from
+  https://fscdn.rohm.com/en/products/databook/datasheet/ic/data_converter/dac/bd79702fv-lb_bd79703fv-lb-e.pdf
+  and for the BD79700 and the BD79701 from
+  https://fscdn.rohm.com/en/products/databook/datasheet/ic/data_converter/dac/bd79700fvm-lb_bd79701fvm-lb-e.pdf
+
+properties:
+  compatible:
+    enum:
+      - rohm,bd79700
+      - rohm,bd79701
+      - rohm,bd79702
+      - rohm,bd79703
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 30000000
+
+  vfs-supply:
+    description:
+      The regulator to use as a full scale voltage. The voltage should be
+      between 2.7V .. VCC. Not present on BD79700 and BD79701.
+
+  vcc-supply:
+    description:
+      The regulator supplying the operating voltage. Should be between
+      2.7V ... 5.5V. Is used also as a Vfs on BD79700 and BD79701.
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - vcc-supply
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rohm,bd79702
+          - rohm,bd79703
+then:
+  required:
+    - vfs-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "rohm,bd79703";
+            reg = <0>;
+            spi-max-frequency = <30000000>;
+            vcc-supply = <&vcc>;
+            vfs-supply = <&vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
index 6adeda4087fc..b15de4eb209c 100644
--- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 DAC bindings
+title: STMicroelectronics STM32 DAC
 
 description: |
   The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
@@ -45,6 +45,10 @@ properties:
   '#size-cells':
     const: 0
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
index b0157050f1ee..201b04af2b22 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
@@ -33,21 +33,22 @@ properties:
   vref-supply:
     description: Needed to provide output scaling.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vref-supply
 
-additionalProperties: false
-
 oneOf:
   - required:
       - spi-cpha
   - required:
       - spi-cpol
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     vref_2v5_reg: regulator-vref {
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
index 714191724f7c..e59db861e2eb 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
@@ -21,6 +21,8 @@ properties:
       - ti,dac5573
       - ti,dac6573
       - ti,dac7573
+      - ti,dac081c081
+      - ti,dac121c081
 
   reg:
     maxItems: 1
@@ -45,7 +47,7 @@ examples:
 
         dac@4c {
             compatible = "ti,dac5571";
-            reg = <0x4C>;
+            reg = <0x4c>;
             vref-supply = <&vdd_supply>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
index 10be98d1f19c..a6814587dbc4 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
@@ -24,14 +24,15 @@ properties:
       Reference voltage must be supplied to establish the scaling of the
       output voltage.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
index d172b142f6ed..20dd1370660d 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
@@ -29,13 +29,14 @@ properties:
       DACs are loaded when the pin connected to this GPIO is pulled low.
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
new file mode 100644
index 000000000000..ff0cb553e871
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/filter/adi,admv8818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV8818 Digitally Tunable, High-Pass and Low-Pass Filter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+    Fully monolithic microwave integrated circuit (MMIC) that
+    features a digitally selectable frequency of operation.
+    The device features four independently controlled high-pass
+    filters (HPFs) and four independently controlled low-pass filters
+    (LPFs) that span the 2 GHz to 18 GHz frequency range.
+
+    https://www.analog.com/en/products/admv8818.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv8818
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: rf_in
+
+  clock-output-names:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  adi,lpf-margin-mhz:
+    description:
+      Sets the minimum distance between the fundamental frequency of `rf_in`
+      and the corner frequency of the low-pass, output filter when operated in
+      'auto' mode. The selected low-pass corner frequency will be greater than,
+      or equal to, `rf_in` + `lpf-margin-hz`. If not setting is found that
+      satisfies this relationship the filter will be put into 'bypass'.
+    default: 0
+
+  adi,hpf-margin-mhz:
+    description:
+      Sets the minimum distance between the fundamental frequency of `rf_in`
+      and the corner frequency of the high-pass, input filter when operated in
+      'auto' mode. The selected high-pass corner frequency will be less than,
+      or equal to, `rf_in` - `hpf-margin-hz`. If not setting is found that
+      satisfies this relationship the filter will be put into 'bypass'.
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv8818@0 {
+        compatible = "adi,admv8818";
+        reg = <0>;
+        spi-max-frequency = <10000000>;
+        clocks = <&admv8818_rfin>;
+        clock-names = "rf_in";
+        adi,lpf-margin-mhz = <300>;
+        adi,hpf-margin-mhz = <300>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 6b3a611e1cf1..2e1ff77fd1de 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices ADF4371/ADF4372 Wideband Synthesizers
 
 maintainers:
-  - Popa Stefan <stefan.popa@analog.com>
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 description: |
   Analog Devices ADF4371/ADF4372 SPI Wideband Synthesizers
@@ -30,8 +31,9 @@ properties:
 
   clock-names:
     description:
-      Must be "clkin"
-    maxItems: 1
+      Must be "clkin" if the input reference is single ended or "clkin-diff"
+      if the input reference is differential.
+    enum: [clkin, clkin-diff]
 
   adi,mute-till-lock-en:
     type: boolean
@@ -40,28 +42,29 @@ properties:
       output stage will shut down until the ADF4371/ADF4372 achieves lock as
       measured by the digital lock detect circuitry.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - clocks
   - clock-names
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
         frequency@0 {
-                compatible = "adi,adf4371";
-                reg = <0>;
-                spi-max-frequency = <1000000>;
-                clocks = <&adf4371_clkin>;
-                clock-names = "clkin";
+            compatible = "adi,adf4371";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            clocks = <&adf4371_clkin>;
+            clock-names = "clkin";
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml
index d7f20b8518e0..d1d1311332f8 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml
@@ -28,6 +28,12 @@ properties:
   clock-names:
     const: clkin
 
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
   gpios:
     maxItems: 1
     description: Lock detect GPIO.
@@ -160,13 +166,16 @@ properties:
       2: +2dBm
       3: +5dBm
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - clocks
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml
new file mode 100644
index 000000000000..5f950ee9aec7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,adf4377.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADF4377 Microwave Wideband Synthesizer with Integrated VCO
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+
+description: |
+   The ADF4377 is a high performance, ultralow jitter, dual output integer-N
+   phased locked loop (PLL) with integrated voltage controlled oscillator (VCO)
+   ideally suited for data converter and mixed signal front end (MxFE) clock
+   applications.
+
+   https://www.analog.com/en/products/adf4377.html
+   https://www.analog.com/en/products/adf4378.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adf4377
+      - adi,adf4378
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      External clock that provides reference input frequency.
+    items:
+      - const: ref_in
+
+  chip-enable-gpios:
+    description:
+      GPIO that controls the Chip Enable Pin.
+    maxItems: 1
+
+  clk1-enable-gpios:
+    description:
+      GPIO that controls the Enable Clock 1 Output Buffer Pin.
+    maxItems: 1
+
+  clk2-enable-gpios:
+    description:
+      GPIO that controls the Enable Clock 2 Output Buffer Pin.
+    maxItems: 1
+
+  adi,muxout-select:
+    description:
+      On chip multiplexer output selection.
+      high_z - MUXOUT Pin set to high-Z.
+      lock_detect - MUXOUT Pin set to lock detector output.
+      muxout_low - MUXOUT Pin set to low.
+      f_div_rclk_2 - MUXOUT Pin set to fDIV_RCLK/2.
+      f_div_nclk_2 - MUXOUT Pin set to fDIV_NCLK/2.
+      muxout_high - MUXOUT Pin set to high.
+    enum: [high_z, lock_detect, muxout_low, f_div_rclk_2, f_div_nclk_2, muxout_high]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adf4378
+    then:
+      properties:
+        clk2-enable-gpios: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        frequency@0 {
+            compatible = "adi,adf4377";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            clocks = <&adf4377_ref_in>;
+            clock-names = "ref_in";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
new file mode 100644
index 000000000000..2bcf4bbc12e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admfm2000.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admfm2000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMFM2000 Dual Microwave Down Converter
+
+maintainers:
+  - Kim Seer Paller <kimseer.paller@analog.com>
+
+description:
+  Dual microwave down converter module with input RF and LO frequency ranges
+  from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz.
+  It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down
+  conversion path.
+
+properties:
+  compatible:
+    enum:
+      - adi,admfm2000
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a channel of the device.
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description:
+          The channel number.
+        minimum: 0
+        maximum: 1
+
+      adi,mixer-mode:
+        description:
+          Enable mixer mode for the channel. It downconverts RF between 5 GHz
+          and 32 GHz to IF between 0.5 GHz and 8 GHz. If not present, the channel
+          is in direct IF mode which bypasses the mixer and downconverts RF
+          between 2 GHz and 8 GHz to IF between 0.5 GHz and 8 GHz.
+        type: boolean
+
+      switch-gpios:
+        description: |
+          GPIOs to select the RF path for the channel. The same state of CTRL-A
+          and CTRL-B GPIOs is not permitted.
+          CTRL-A   CTRL-B    CH1 Status        CH2 Status
+          1        0         Direct IF mode    Mixer mode
+          0        1         Mixer mode        Direct IF mode
+
+        items:
+          - description: CTRL-A GPIO
+          - description: CTRL-B GPIO
+
+      attenuation-gpios:
+        description: |
+          Choice of attenuation:
+          DSA-V4  DSA-V3  DSA-V2  DSA-V1  DSA-V0
+          1       1       1       1       1        0 dB
+          1       1       1       1       0        -1 dB
+          1       1       1       0       1        -2 dB
+          1       1       0       1       1        -4 dB
+          1       0       1       1       1        -8 dB
+          0       1       1       1       1        -16 dB
+          0       0       0       0       0        -31 dB
+
+        items:
+          - description: DSA-V0 GPIO
+          - description: DSA-V1 GPIO
+          - description: DSA-V2 GPIO
+          - description: DSA-V3 GPIO
+          - description: DSA-V4 GPIO
+
+    required:
+      - reg
+      - switch-gpios
+      - attenuation-gpios
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    converter {
+      compatible = "adi,admfm2000";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      channel@0 {
+        reg = <0>;
+        switch-gpios = <&gpio 1 GPIO_ACTIVE_LOW>,
+                       <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+        attenuation-gpios = <&gpio 17 GPIO_ACTIVE_LOW>,
+                            <&gpio 22 GPIO_ACTIVE_LOW>,
+                            <&gpio 23 GPIO_ACTIVE_LOW>,
+                            <&gpio 24 GPIO_ACTIVE_LOW>,
+                            <&gpio 25 GPIO_ACTIVE_LOW>;
+      };
+
+      channel@1 {
+        reg = <1>;
+        adi,mixer-mode;
+        switch-gpios = <&gpio 3 GPIO_ACTIVE_LOW>,
+                       <&gpio 4 GPIO_ACTIVE_HIGH>;
+
+        attenuation-gpios = <&gpio 0 GPIO_ACTIVE_LOW>,
+                            <&gpio 5 GPIO_ACTIVE_LOW>,
+                            <&gpio 6 GPIO_ACTIVE_LOW>,
+                            <&gpio 16 GPIO_ACTIVE_LOW>,
+                            <&gpio 26 GPIO_ACTIVE_LOW>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
new file mode 100644
index 000000000000..f2eb2287ed9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1013 Microwave Upconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave upconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1013.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1013
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+
+  vcm-supply:
+    description:
+      Analog voltage regulator.
+
+  vcc-drv-supply:
+    description:
+      RF Driver voltage regulator.
+
+  vcc2-drv-supply:
+    description:
+      RF predriver voltage regulator.
+
+  vcc-vva-supply:
+    description:
+      VVA Control Circuit voltage regulator.
+
+  vcc-amp1-supply:
+    description:
+      RF Amplifier 1 voltage regulator.
+
+  vcc-amp2-supply:
+    description:
+      RF Amplifier 2 voltage regulator.
+
+  vcc-env-supply:
+    description:
+      Envelope Detector voltage regulator.
+
+  vcc-bg-supply:
+    description:
+      Mixer Chip Band Gap Circuit voltage regulator.
+
+  vcc-bg2-supply:
+    description:
+      VGA Chip Band Gap Circuit voltage regulator.
+
+  vcc-mixer-supply:
+    description:
+      Mixer voltage regulator.
+
+  vcc-quad-supply:
+    description:
+      Quadruppler voltage regulator.
+
+  adi,detector-enable:
+    description:
+      Enable the Envelope Detector available at output pins VENV_P and
+      VENV_N. Disable to reduce power consumption.
+    type: boolean
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+  - vcc-drv-supply
+  - vcc2-drv-supply
+  - vcc-vva-supply
+  - vcc-amp1-supply
+  - vcc-amp2-supply
+  - vcc-env-supply
+  - vcc-bg-supply
+  - vcc-bg2-supply
+  - vcc-mixer-supply
+  - vcc-quad-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv1013@0{
+        compatible = "adi,admv1013";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1013_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        vcc-drv-supply = <&vcc_drv>;
+        vcc2-drv-supply = <&vcc2_drv>;
+        vcc-vva-supply = <&vcc_vva>;
+        vcc-amp1-supply = <&vcc_amp1>;
+        vcc-amp2-supply = <&vcc_amp2>;
+        vcc-env-supply = <&vcc_env>;
+        vcc-bg-supply = <&vcc_bg>;
+        vcc-bg2-supply = <&vcc_bg2>;
+        vcc-mixer-supply = <&vcc_mixer>;
+        vcc-quad-supply = <&vcc_quad>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
new file mode 100644
index 000000000000..39cc63a11762
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1014.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1014 Microwave Downconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave downconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1014.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1014
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+    description:
+      External clock that provides the Local Oscillator input.
+
+  vcm-supply:
+    description:
+      Common-mode voltage regulator.
+
+  vcc-if-bb-supply:
+    description:
+      BB and IF supply voltage regulator.
+
+  vcc-vga-supply:
+    description:
+      RF Amplifier supply voltage regulator.
+
+  vcc-vva-supply:
+    description:
+      VVA Control Circuit supply voltage regulator.
+
+  vcc-lna-3p3-supply:
+    description:
+      Low Noise Amplifier 3.3V supply voltage regulator.
+
+  vcc-lna-1p5-supply:
+    description:
+      Low Noise Amplifier 1.5V supply voltage regulator.
+
+  vcc-bg-supply:
+    description:
+      Band Gap Circuit supply voltage regulator.
+
+  vcc-quad-supply:
+    description:
+      Quadruple supply voltage regulator.
+
+  vcc-mixer-supply:
+    description:
+      Mixer supply voltage regulator.
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,detector-enable:
+    description:
+      Digital Rx Detector Enable. The Square Law Detector output is
+      available at output pin VDET.
+    type: boolean
+
+  adi,p1db-compensation-enable:
+    description:
+      Turn on bits to optimize P1dB.
+    type: boolean
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+  - vcc-if-bb-supply
+  - vcc-vga-supply
+  - vcc-vva-supply
+  - vcc-lna-3p3-supply
+  - vcc-lna-1p5-supply
+  - vcc-bg-supply
+  - vcc-quad-supply
+  - vcc-mixer-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      converter@0 {
+        compatible = "adi,admv1014";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1014_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        vcc-if-bb-supply = <&vcc_if_bb>;
+        vcc-vga-supply = <&vcc_vga>;
+        vcc-vva-supply = <&vcc_vva>;
+        vcc-lna-3p3-supply = <&vcc_lna_3p3>;
+        vcc-lna-1p5-supply = <&vcc_lna_1p5>;
+        vcc-bg-supply = <&vcc_bg>;
+        vcc-quad-supply = <&vcc_quad>;
+        vcc-mixer-supply = <&vcc_mixer>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+        adi,p1db-compensation-enable;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
new file mode 100644
index 000000000000..ca40359a3944
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv4420.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV4420 K Band Downconverter
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description:
+  The ADMV4420 is a highly integrated, double balanced, active
+  mixer with an integrated fractional-N synthesizer, ideally suited
+  for next generation K band satellite communications
+
+properties:
+  compatible:
+    enum:
+      - adi,admv4420
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  adi,lo-freq-khz:
+    description: LO Frequency
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  adi,ref-ext-single-ended-en:
+    description: External reference selected.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mixer@0 {
+        compatible = "adi,admv4420";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        adi,lo-freq-khz = <16750000>;
+        adi,ref-ext-single-ended-en;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
index 3a8ea93f4e0c..f11391ab4b62 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
@@ -113,7 +113,10 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
index 662ec59ca0af..3d94dd4612c4 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
@@ -38,7 +38,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -47,13 +50,13 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         gyro@0 {
-                   compatible = "adi,adxrs290";
-                   reg = <0>;
-                   spi-max-frequency = <5000000>;
-                   spi-cpol;
-                   spi-cpha;
-                   interrupt-parent = <&gpio>;
-                   interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            compatible = "adi,adxrs290";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
index b6bbc312a7cf..3c6fe74af0b8 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -22,16 +22,24 @@ properties:
   vdd-supply: true
   vddio-supply: true
 
+  spi-max-frequency:
+    maximum: 10000000
+
   interrupts:
     minItems: 1
+    maxItems: 2
     description:
       Should be configured with type IRQ_TYPE_EDGE_RISING.
+      If two interrupts are provided, expected order is INT1 and INT2.
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,itg3200.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,itg3200.yaml
new file mode 100644
index 000000000000..4d8abf8ac2c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,itg3200.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/gyroscope/invensense,itg3200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Invensense ITG-3200 Gyroscope
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Triple-axis, digital output gyroscope with a three 16-bit analog-to-digital
+  converters (ADCs) for digitizing the gyro outputs, a user-selectable internal
+  low-pass filter bandwidth, and a Fast-Mode I2C.
+
+properties:
+  compatible:
+    const: invensense,itg3200
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vlogic-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ext_clock
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gyroscope@68 {
+            compatible = "invensense,itg3200";
+            reg = <0x68>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
index 7e2accc3d5ce..f3242dc0e7e6 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
@@ -21,7 +21,7 @@ properties:
   vlogic-supply: true
 
   interrupts:
-    minItems: 1
+    maxItems: 1
     description:
       Interrupt mapping for the trigger interrupt from the internal oscillator.
 
@@ -61,7 +61,7 @@ examples:
                 #size-cells = <0>;
 
                 magnetometer@c {
-                    compatible = "ak,ak8975";
+                    compatible = "asahi-kasei,ak8975";
                     reg = <0x0c>;
                 };
             };
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
index 3f57a1b813e6..297d519d68f2 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
@@ -56,40 +56,43 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         gyroscope@20 {
-          compatible = "nxp,fxas21002c";
-          reg = <0x20>;
+            compatible = "nxp,fxas21002c";
+            reg = <0x20>;
 
-          vdd-supply = <&reg_peri_3p15v>;
-          vddio-supply = <&reg_peri_3p15v>;
+            vdd-supply = <&reg_peri_3p15v>;
+            vddio-supply = <&reg_peri_3p15v>;
 
-          interrupt-parent = <&gpio1>;
-          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-          interrupt-names = "INT1";
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
         };
     };
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
         gyroscope@0 {
-          compatible = "nxp,fxas21002c";
-          reg = <0x0>;
+            compatible = "nxp,fxas21002c";
+            reg = <0x0>;
 
-          spi-max-frequency = <2000000>;
+            spi-max-frequency = <2000000>;
 
-          interrupt-parent = <&gpio2>;
-          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-          interrupt-names = "INT2";
+            interrupt-parent = <&gpio2>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
index 967778fb0ce8..d4753c85ecc3 100644
--- a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
+++ b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml
@@ -27,6 +27,14 @@ properties:
       LED current whilst the engine is running. First indexed value is
       the configuration for the RED LED, and second value is for the IR LED.
 
+  maxim,pulse-width-us:
+    description: |
+      LED pulse width in microseconds. Appropriate pulse width depends on
+      factors such as optical window absorption, LED-to-sensor distance,
+      and expected reflectivity of the skin or contact surface.
+    enum: [200, 400, 800, 1600]
+    default: 1600
+
 additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
index c13c10c8d65d..205d352ab467 100644
--- a/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
+++ b/Documentation/devicetree/bindings/iio/health/maxim,max30102.yaml
@@ -4,16 +4,20 @@
 $id: http://devicetree.org/schemas/iio/health/maxim,max30102.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Maxim MAX30102 heart rate and pulse oximeter and MAX30105 particle-sensor
+title: Maxim MAX30101/2 heart rate and pulse oximeter and MAX30105 particle-sensor
 
 maintainers:
   - Matt Ranostay <matt.ranostay@konsulko.com>
 
 properties:
   compatible:
-    enum:
-      - maxim,max30102
-      - maxim,max30105
+    oneOf:
+      - enum:
+          - maxim,max30102
+          - maxim,max30105
+      - items:
+          - const: maxim,max30101
+          - const: maxim,max30105
 
   reg:
     maxItems: 1
@@ -42,7 +46,7 @@ allOf:
       properties:
         compatible:
           contains:
-            const: maxim,max30100
+            const: maxim,max30102
     then:
       properties:
         maxim,green-led-current-microamp: false
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
index d861526c5c42..5b6cde86b5a5 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
@@ -23,16 +23,18 @@ properties:
     maxItems: 1
     description: Connected to ADC_RDY pin.
 
-  reset-gpios: true
-
-  spi-max-frequency: true
-
-additionalProperties: false
+  reset-gpios:
+    maxItems: 1
 
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
@@ -41,7 +43,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        heart_mon@0 {
+        heart-mon@0 {
             compatible = "ti,afe4403";
             reg = <0>;
             spi-max-frequency = <10000000>;
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
index c0e815d9999e..167d10bd60af 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
@@ -23,7 +23,8 @@ properties:
     maxItems: 1
     description: Connected to ADC_RDY pin.
 
-  reset-gpios: true
+  reset-gpios:
+    maxItems: 1
 
 additionalProperties: false
 
@@ -39,7 +40,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        heart_mon@58 {
+        heart-mon@58 {
             compatible = "ti,afe4404";
             reg = <0x58>;
             tx-supply = <&vbat>;
diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
index 2247481d0203..0103f4238942 100644
--- a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
@@ -34,7 +34,7 @@ additionalProperties: false
 
 examples:
   - |
-    humidity_sensor {
+    humidity-sensor {
         compatible = "dht11";
         gpios = <&gpio0 6 0>;
     };
diff --git a/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml b/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml
new file mode 100644
index 000000000000..1e25cf781cf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/sciosense,ens210.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/sciosense,ens210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ScioSense ENS210 temperature and humidity sensor
+
+maintainers:
+  - Joshua Felmeden <jfelmeden@thegoodpenguin.co.uk>
+
+description: |
+  Temperature and Humidity sensor.
+
+  Datasheet:
+    https://www.sciosense.com/wp-content/uploads/2024/04/ENS21x-Datasheet.pdf
+    https://www.sciosense.com/wp-content/uploads/2023/12/ENS210-Datasheet.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sciosense,ens210a
+              - sciosense,ens211
+              - sciosense,ens212
+              - sciosense,ens213a
+              - sciosense,ens215
+          - const: sciosense,ens210
+      - const: sciosense,ens210
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@43 {
+            compatible = "sciosense,ens210";
+            reg = <0x43>;
+        };
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
index 88384b69f917..e3eca8917517 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Eugene Zaikonnikov <ez@norophonic.com>
 
 description: |
-  Relative humidity and tempereature sensors on I2C bus
+  Relative humidity and temperature sensors on I2C bus
 
   Datasheets are available at:
     http://www.ti.com/product/HDC2010/datasheet
@@ -27,6 +27,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -35,12 +38,12 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      humidity@40 {
-          compatible = "ti,hdc2010";
-          reg = <0x40>;
-      };
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity@40 {
+            compatible = "ti,hdc2010";
+            reg = <0x40>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
new file mode 100644
index 000000000000..b375d307513f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc3020.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/humidity/ti,hdc3020.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDC3020/HDC3021/HDC3022 humidity and temperature iio sensors
+
+maintainers:
+  - Li peiyu <579lpy@gmail.com>
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description:
+  https://www.ti.com/lit/ds/symlink/hdc3020.pdf
+
+  The HDC302x is an integrated capacitive based relative humidity (RH)
+  and temperature sensor.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,hdc3021
+              - ti,hdc3022
+          - const: ti,hdc3020
+      - const: ti,hdc3020
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity-sensor@47 {
+            compatible = "ti,hdc3021", "ti,hdc3020";
+            reg = <0x47>;
+            vdd-supply = <&vcc_3v3>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index 340be256f283..3a725ece7ec4 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -25,7 +25,9 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
+  spi-cs-inactive-delay-ns:
+    minimum: 16000
+    default: 16000
 
   interrupts:
     maxItems: 1
@@ -35,13 +37,15 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
index a7574210175a..9d185f7bfdcb 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@@ -30,12 +30,19 @@ properties:
       - adi,adis16467-2
       - adi,adis16467-3
       - adi,adis16500
+      - adi,adis16501
       - adi,adis16505-1
       - adi,adis16505-2
       - adi,adis16505-3
       - adi,adis16507-1
       - adi,adis16507-2
       - adi,adis16507-3
+      - adi,adis16575-2
+      - adi,adis16575-3
+      - adi,adis16576-2
+      - adi,adis16576-3
+      - adi,adis16577-2
+      - adi,adis16577-3
 
   reg:
     maxItems: 1
@@ -47,6 +54,10 @@ properties:
   spi-max-frequency:
     maximum: 2000000
 
+  spi-cs-inactive-delay-ns:
+    minimum: 16000
+    default: 16000
+
   interrupts:
     maxItems: 1
 
@@ -79,18 +90,26 @@ required:
   - spi-cpol
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
           contains:
             enum:
               - adi,adis16500
+              - adi,adis16501
               - adi,adis16505-1
               - adi,adis16505-2
               - adi,adis16505-3
               - adi,adis16507-1
               - adi,adis16507-2
               - adi,adis16507-3
+              - adi,adis16575-2
+              - adi,adis16575-3
+              - adi,adis16576-2
+              - adi,adis16576-3
+              - adi,adis16577-2
+              - adi,adis16577-3
 
     then:
       properties:
@@ -107,23 +126,40 @@ allOf:
       dependencies:
         adi,sync-mode: [ clocks ]
 
-additionalProperties: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adis16575-2
+              - adi,adis16575-3
+              - adi,adis16576-2
+              - adi,adis16576-3
+              - adi,adis16577-2
+              - adi,adis16577-3
+
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 15000000
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
     spi {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            adis16475: adis16475-3@0 {
-                    compatible = "adi,adis16475-3";
-                    reg = <0>;
-                    spi-cpha;
-                    spi-cpol;
-                    spi-max-frequency = <2000000>;
-                    interrupts = <4 IRQ_TYPE_EDGE_RISING>;
-                    interrupt-parent = <&gpio>;
-            };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adis16475: adis16475-3@0 {
+            compatible = "adi,adis16475-3";
+            reg = <0>;
+            spi-cpha;
+            spi-cpol;
+            spi-max-frequency = <2000000>;
+            interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
index 5dbe24be9925..43ecf46e9c20 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
@@ -7,22 +7,35 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices ADIS16480 and similar IMUs
 
 maintainers:
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+  - Marcelo Schmitt <marcelo.schmitt@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 properties:
   compatible:
-    enum:
-      - adi,adis16375
-      - adi,adis16480
-      - adi,adis16485
-      - adi,adis16488
-      - adi,adis16490
-      - adi,adis16495-1
-      - adi,adis16495-2
-      - adi,adis16495-3
-      - adi,adis16497-1
-      - adi,adis16497-2
-      - adi,adis16497-3
+    oneOf:
+      - enum:
+          - adi,adis16375
+          - adi,adis16480
+          - adi,adis16485
+          - adi,adis16486
+          - adi,adis16488
+          - adi,adis16489
+          - adi,adis16490
+          - adi,adis16495-1
+          - adi,adis16495-2
+          - adi,adis16495-3
+          - adi,adis16497-1
+          - adi,adis16497-2
+          - adi,adis16497-3
+          - adi,adis16545-1
+          - adi,adis16545-2
+          - adi,adis16545-3
+          - adi,adis16547-1
+          - adi,adis16547-2
+          - adi,adis16547-3
+      - items:
+          - const: adi,adis16487
+          - const: adi,adis16485
 
   reg:
     maxItems: 1
@@ -47,8 +60,6 @@ properties:
         - DIO3
         - DIO4
 
-  spi-max-frequency: true
-
   spi-cpha: true
   spi-cpol: true
 
@@ -96,8 +107,6 @@ properties:
       - DIO3
       - DIO4
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -106,6 +115,11 @@ required:
   - spi-cpol
   - spi-max-frequency
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
new file mode 100644
index 000000000000..cf5324de4fd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16550.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/adi,adis16550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIS16550 and similar IMUs
+
+maintainers:
+  - Nuno Sa <nuno.sa@analog.com>
+  - Ramona Gradinariu <ramona.gradinariu@analog.com>
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+  - Robert Budai <robert.budai@analog.com>
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16550
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    maximum: 15000000
+
+  vdd-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Active low RESET pin.
+    maxItems: 1
+
+  clocks:
+    description: If not provided, then the internal clock is used.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-cpha
+  - spi-cpol
+  - spi-max-frequency
+  - vdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        imu@0 {
+            compatible = "adi,adis16550";
+            reg = <0>;
+            spi-max-frequency = <15000000>;
+            spi-cpol;
+            spi-cpha;
+            vdd-supply = <&vdd>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
index 6e73cd889b5c..2cf8a0c7eb4c 100644
--- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -16,7 +16,11 @@ description: |
 
 properties:
   compatible:
-    const: bosch,bmi160
+    oneOf:
+      - const: bosch,bmi160
+      - items:
+          - const: bosch,bmi120
+          - const: bosch,bmi160
 
   reg:
     maxItems: 1
@@ -33,6 +37,7 @@ properties:
       to "INT2" if INT2 pin should be used instead
 
   drive-open-drain:
+    type: boolean
     description: |
       set if the specified interrupt pin should be configured as
       open drain. If not set, defaults to push-pull.
@@ -46,13 +51,14 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -63,16 +69,16 @@ examples:
         #size-cells = <0>;
 
         bmi160@68 {
-                compatible = "bosch,bmi160";
-                reg = <0x68>;
-                vdd-supply = <&pm8916_l17>;
-                vddio-supply = <&pm8916_l6>;
-                interrupt-parent = <&gpio4>;
-                interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-                interrupt-names = "INT1";
-                mount-matrix = "0", "1", "0",
-                               "-1", "0", "0",
-                               "0", "0", "1";
+            compatible = "bosch,bmi160";
+            reg = <0x68>;
+            vdd-supply = <&pm8916_l17>;
+            vddio-supply = <&pm8916_l6>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+            mount-matrix = "0", "1", "0",
+                           "-1", "0", "0",
+                           "0", "0", "1";
         };
     };
   - |
@@ -83,11 +89,11 @@ examples:
         #size-cells = <0>;
 
         bmi160@0 {
-                compatible = "bosch,bmi160";
-                reg = <0>;
-                spi-max-frequency = <10000000>;
-                interrupt-parent = <&gpio2>;
-                interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-                interrupt-names = "INT2";
+            compatible = "bosch,bmi160";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml
new file mode 100644
index 000000000000..860a6c1fea3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi270.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi270.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI270 6-Axis IMU
+
+maintainers:
+  - Alex Lanzano <lanzano.alex@gmail.com>
+
+description: |
+  BMI270 is a 6-axis inertial measurement unit that can measure acceleration and
+  angular velocity. The sensor also supports configurable interrupt events such
+  as motion, step counter, and wrist motion gestures. The sensor can communicate
+  I2C or SPI.
+  https://www.bosch-sensortec.com/products/motion-sensors/imus/bmi270/
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmi260
+      - bosch,bmi270
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    type: boolean
+    description:
+      set if the specified interrupt pins should be configured as
+      open drain. If not set, defaults to push-pull.
+
+  mount-matrix:
+    description:
+      an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "bosch,bmi270";
+            reg = <0x68>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml
new file mode 100644
index 000000000000..7bf8294a8f2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi323.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bmi323.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMI323 6-Axis IMU
+
+maintainers:
+  - Jagath Jog J <jagathjog1996@gmail.com>
+
+description:
+  BMI323 is a 6-axis inertial measurement unit that supports acceleration and
+  gyroscopic measurements with hardware fifo buffering. Sensor also provides
+  events information such as motion, steps, orientation, single and double
+  tap detection.
+
+properties:
+  compatible:
+    const: bosch,bmi323
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    type: boolean
+    description:
+      set if the specified interrupt pin should be configured as
+      open drain. If not set, defaults to push-pull.
+
+  mount-matrix:
+    description:
+      an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example for I2C
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "bosch,bmi323";
+            reg = <0x68>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
new file mode 100644
index 000000000000..e0d06db161a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bno055.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BNO055
+
+maintainers:
+  - Andrea Merello <andrea.merello@iit.it>
+
+description: |
+  Inertial Measurement Unit with Accelerometer, Gyroscope, Magnetometer and
+  internal MCU for sensor fusion
+  https://www.bosch-sensortec.com/products/smart-sensors/bno055/
+
+properties:
+  compatible:
+    enum:
+      - bosch,bno055
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+      imu {
+        compatible = "bosch,bno055";
+        reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+        clocks = <&imu_clk>;
+      };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      imu@28 {
+        compatible = "bosch,bno055";
+        reg = <0x28>;
+        reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+        clocks = <&imu_clk>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,smi240.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,smi240.yaml
new file mode 100644
index 000000000000..58f1411728f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,smi240.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,smi240.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch smi240 imu
+
+maintainers:
+  - Jianping Shen <Jianping.Shen@de.bosch.com>
+
+description:
+  Inertial Measurement Unit with Accelerometer and Gyroscope
+  with a measurement range of +/-300°/s and up to 16g.
+  https://www.bosch-semiconductors.com/mems-sensors/highly-automated-driving/smi240/
+
+properties:
+  compatible:
+    const: bosch,smi240
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@0 {
+            compatible = "bosch,smi240";
+            reg = <0>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
+            spi-max-frequency = <10000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml
new file mode 100644
index 000000000000..0270ca456d2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,smi330.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch SMI330 6-Axis IMU
+
+maintainers:
+  - Stefan Gutmann <stefam.gutmann@de.bosch.com>
+
+description:
+  SMI330 is a 6-axis inertial measurement unit that supports acceleration and
+  gyroscopic measurements with hardware fifo buffering. Sensor also provides
+  events information such as motion, no-motion and tilt detection.
+
+properties:
+  compatible:
+    const: bosch,smi330
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+  vddio-supply:
+    description: provide VDD IO power to the sensor.
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    type: boolean
+    description:
+      set if the interrupt pin(s) should be configured as
+      open drain. If not set, defaults to push-pull.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example for I2C
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "bosch,smi330";
+            reg = <0x68>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupt-parent = <&gpio>;
+            interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
+
+    // Example for SPI
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@0 {
+            compatible = "bosch,smi330";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            interrupt-parent = <&gpio>;
+            interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 4c1c083d0e92..119e28a833fd 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: InvenSense ICM-426xx Inertial Measurement Unit
 
 maintainers:
-  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+  - Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
 
 description: |
   6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
@@ -31,12 +31,24 @@ properties:
       - invensense,icm42602
       - invensense,icm42605
       - invensense,icm42622
+      - invensense,icm42631
+      - invensense,icm42686
+      - invensense,icm42688
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
 
   drive-open-drain:
     type: boolean
@@ -47,7 +59,6 @@ properties:
   vddio-supply:
     description: Regulator that provides power to the bus
 
-  spi-max-frequency: true
   spi-cpha: true
   spi-cpol: true
 
@@ -56,41 +67,44 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         icm42605@68 {
-          compatible = "invensense,icm42605";
-          reg = <0x68>;
-          interrupt-parent = <&gpio2>;
-          interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-          vdd-supply = <&vdd>;
-          vddio-supply = <&vddio>;
+            compatible = "invensense,icm42605";
+            reg = <0x68>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT1";
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
         };
     };
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
         icm42602@0 {
-          compatible = "invensense,icm42602";
-          reg = <0>;
-          spi-max-frequency = <24000000>;
-          spi-cpha;
-          spi-cpol;
-          interrupt-parent = <&gpio1>;
-          interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-          vdd-supply = <&vdd>;
-          vddio-supply = <&vddio>;
+            compatible = "invensense,icm42602";
+            reg = <0>;
+            spi-max-frequency = <24000000>;
+            spi-cpha;
+            spi-cpol;
+            interrupt-parent = <&gpio1>;
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT1";
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml
new file mode 100644
index 000000000000..e0b78d14420f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/invensense,icm45600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense ICM-45600 Inertial Measurement Unit
+
+maintainers:
+  - Remi Buisson <remi.buisson@tdk.com>
+
+description: |
+  6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis
+  accelerometer.
+
+  It has a configurable host interface that supports I3C, I2C and SPI serial
+  communication, features up to 8kB FIFO and 2 programmable interrupts with
+  ultra-low-power wake-on-motion support to minimize system power consumption.
+
+  Other industry-leading features include InvenSense on-chip APEX Motion
+  Processing engine for gesture recognition, activity classification, and
+  pedometer, along with programmable digital filters, and an embedded
+  temperature sensor.
+
+  https://invensense.tdk.com/wp-content/uploads/documentation/DS-000576_ICM-45605.pdf
+
+properties:
+  compatible:
+    enum:
+      - invensense,icm45605
+      - invensense,icm45606
+      - invensense,icm45608
+      - invensense,icm45634
+      - invensense,icm45686
+      - invensense,icm45687
+      - invensense,icm45688p
+      - invensense,icm45689
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [int1, int2]
+      - const: int2
+    description: Choose chip interrupt pin to be used as interrupt input.
+
+  drive-open-drain:
+    type: boolean
+
+  vdd-supply: true
+
+  vddio-supply: true
+
+  mount-matrix: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imu@68 {
+            compatible = "invensense,icm45605";
+            reg = <0x68>;
+            interrupt-parent = <&gpio2>;
+            interrupt-names = "int1";
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
+            mount-matrix = "0", "-1", "0",
+                           "1", "0", "0",
+                           "0", "0", "1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index edbc2921aabd..1af0855c33e6 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -7,28 +7,41 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device
 
 maintainers:
-  - Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
+  - Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
 
 description: |
   These devices support both I2C and SPI bus interfaces.
 
 properties:
   compatible:
-    enum:
-      - invensense,iam20680
-      - invensense,icm20608
-      - invensense,icm20609
-      - invensense,icm20689
-      - invensense,icm20602
-      - invensense,icm20690
-      - invensense,mpu6000
-      - invensense,mpu6050
-      - invensense,mpu6500
-      - invensense,mpu6515
-      - invensense,mpu6880
-      - invensense,mpu9150
-      - invensense,mpu9250
-      - invensense,mpu9255
+    oneOf:
+      - enum:
+          - invensense,iam20380
+          - invensense,iam20680
+          - invensense,icm20608
+          - invensense,icm20609
+          - invensense,icm20689
+          - invensense,icm20602
+          - invensense,icm20690
+          - invensense,mpu6000
+          - invensense,mpu6050
+          - invensense,mpu6500
+          - invensense,mpu6515
+          - invensense,mpu6880
+          - invensense,mpu9150
+          - invensense,mpu9250
+          - invensense,mpu9255
+      - items:
+          - const: invensense,icm20600
+          - const: invensense,icm20602
+      - items:
+          - const: invensense,icm20608d
+          - const: invensense,icm20608
+      - items:
+          - enum:
+              - invensense,iam20680hp
+              - invensense,iam20680ht
+          - const: invensense,iam20680
 
   reg:
     maxItems: 1
@@ -36,13 +49,16 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
   vddio-supply: true
 
   mount-matrix: true
 
+  invensense,level-shifter:
+    type: boolean
+    description: |
+      From ancient platform data struct: false: VLogic, true: VDD
+
   i2c-gate:
     $ref: /schemas/i2c/i2c-controller.yaml
     unevaluatedProperties: false
@@ -50,25 +66,26 @@ properties:
       These devices also support an auxiliary i2c bus via an i2c-gate.
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
-      not:
-        properties:
-          compatible:
-            contains:
-              enum:
-                - invensense,mpu9150
-                - invensense,mpu9250
-                - invensense,mpu9255
+      properties:
+        compatible:
+          contains:
+            enum:
+              - invensense,iam20680
+              - invensense,icm20602
+              - invensense,icm20608
+              - invensense,icm20609
+              - invensense,icm20689
     then:
       properties:
         i2c-gate: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
   - reg
-  - interrupts
 
 examples:
   - |
@@ -95,7 +112,7 @@ examples:
                 #address-cells = <1>;
                 #size-cells = <0>;
                 magnetometer@c {
-                    compatible = "ak,ak8975";
+                    compatible = "asahi-kasei,ak8975";
                     reg = <0x0c>;
                 };
             };
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 479e7065d4eb..2930b3386703 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale FXOS8700 Inertial Measurement Unit
 
 maintainers:
-  - Robert Jones <rjones@gateworks.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   Accelerometer and magnetometer combo device with an i2c and SPI interface.
@@ -36,45 +36,44 @@ properties:
   drive-open-drain:
     type: boolean
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         fxos8700@1e {
-          compatible = "nxp,fxos8700";
-          reg = <0x1e>;
+            compatible = "nxp,fxos8700";
+            reg = <0x1e>;
 
-          interrupt-parent = <&gpio2>;
-          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-          interrupt-names = "INT1";
+            interrupt-parent = <&gpio2>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
         };
     };
   - |
-    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
         fxos8700@0 {
-          compatible = "nxp,fxos8700";
-          reg = <0>;
+            compatible = "nxp,fxos8700";
+            reg = <0>;
 
-          spi-max-frequency = <1000000>;
-          interrupt-parent = <&gpio1>;
-          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-          interrupt-names = "INT2";
+            spi-max-frequency = <1000000>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index d9b3213318fb..c48a96d17f51 100644
--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -14,23 +14,43 @@ description:
 
 properties:
   compatible:
-    enum:
-      - st,lsm6ds3
-      - st,lsm6ds3h
-      - st,lsm6dsl
-      - st,lsm6dsm
-      - st,ism330dlc
-      - st,lsm6dso
-      - st,asm330lhh
-      - st,lsm6dsox
-      - st,lsm6dsr
-      - st,lsm6ds3tr-c
-      - st,ism330dhcx
-      - st,lsm9ds1-imu
-      - st,lsm6ds0
-      - st,lsm6dsrx
-      - st,lsm6dst
-      - st,lsm6dsop
+    oneOf:
+      - enum:
+          - st,lsm6ds3
+          - st,lsm6ds3h
+          - st,lsm6dsl
+          - st,lsm6dsm
+          - st,ism330dlc
+          - st,lsm6dso
+          - st,asm330lhh
+          - st,lsm6dsox
+          - st,lsm6dsr
+          - st,lsm6ds3tr-c
+          - st,ism330dhcx
+          - st,lsm9ds1-imu
+          - st,lsm6ds0
+          - st,lsm6dsrx
+          - st,lsm6dst
+          - st,lsm6dsop
+          - st,lsm6dsv
+          - st,lsm6dso16is
+      - items:
+          - enum:
+              - st,asm330lhhx
+              - st,asm330lhhxg1
+          - const: st,lsm6dsr
+      - items:
+          - const: st,lsm6dstx
+          - const: st,lsm6dst
+      - items:
+          - const: st,lsm6dsv16x
+          - const: st,lsm6dsv
+      - items:
+          - const: st,ism330is
+          - const: st,lsm6dso16is
+      - items:
+          - const: st,asm330lhb
+          - const: st,asm330lhh
 
   reg:
     maxItems: 1
@@ -41,8 +61,6 @@ properties:
     description:
       Supports up to 2 interrupt lines via the INT1 and INT2 pins.
 
-  spi-max-frequency: true
-
   vdd-supply:
     description: if defined provides VDD power to the sensor.
 
@@ -50,7 +68,7 @@ properties:
     description: if defined provides VDD IO power to the sensor.
 
   st,drdy-int-pin:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       The pin on the package that will be used to signal data ready
     enum:
@@ -61,6 +79,13 @@ properties:
     type: boolean
     description: enable/disable internal i2c controller pullup resistors.
 
+  st,disable-sensor-hub:
+    type: boolean
+    description:
+      Enable/disable internal i2c controller slave autoprobing at bootstrap.
+      Disable sensor-hub is useful if i2c controller clock/data lines are
+      connected through a pull-up with other chip lines (e.g. SDO/SA0).
+
   drive-open-drain:
     type: boolean
     description:
@@ -70,12 +95,19 @@ properties:
   wakeup-source:
     $ref: /schemas/types.yaml#/definitions/flag
 
-additionalProperties: false
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix
 
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/iio/iio.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
index 0e8cd02759b3..062a038aa0ff 100644
--- a/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
+++ b/Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
@@ -4,19 +4,22 @@
 $id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor
+title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor and AMS AS7331 UV Sensor
 
 maintainers:
   - Christian Eggers <ceggers@arri.de>
 
 description: |
-  XYZ True Color Sensor with I2C Interface
+  AMS AS73211 XYZ True Color Sensor with I2C Interface
   https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df
+  AMS AS7331 UVA, UVB and UVC Sensor with I2C Interface
+  https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf
 
 properties:
   compatible:
     enum:
       - ams,as73211
+      - ams,as7331
 
   reg:
     description:
diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
index 206af44f2c43..b750096530bc 100644
--- a/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
+++ b/Documentation/devicetree/bindings/iio/light/avago,apds9300.yaml
@@ -4,17 +4,22 @@
 $id: http://devicetree.org/schemas/iio/light/avago,apds9300.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Avago APDS9300 ambient light sensor
+title: Avago Gesture/RGB/ALS/Proximity sensors
 
 maintainers:
-  - Jonathan Cameron <jic23@kernel.org>
+  - Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
 
 description: |
-  Datasheet at https://www.avagotech.com/docs/AV02-1077EN
+  Datasheet: https://www.avagotech.com/docs/AV02-1077EN
+  Datasheet: https://www.avagotech.com/docs/AV02-4191EN
+  Datasheet: https://www.avagotech.com/docs/AV02-4755EN
 
 properties:
   compatible:
-    const: avago,apds9300
+    enum:
+      - avago,apds9300
+      - avago,apds9306
+      - avago,apds9960
 
   reg:
     maxItems: 1
@@ -22,6 +27,8 @@ properties:
   interrupts:
     maxItems: 1
 
+  vdd-supply: true
+
 additionalProperties: false
 
 required:
@@ -30,6 +37,8 @@ required:
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -38,7 +47,8 @@ examples:
             compatible = "avago,apds9300";
             reg = <0x39>;
             interrupt-parent = <&gpio2>;
-            interrupts = <29 8>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            vdd-supply = <&regulator_3v3>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml b/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml
deleted file mode 100644
index f06e0fda5629..000000000000
--- a/Documentation/devicetree/bindings/iio/light/avago,apds9960.yaml
+++ /dev/null
@@ -1,44 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/iio/light/avago,apds9960.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Avago APDS9960 gesture/RGB/ALS/proximity sensor
-
-maintainers:
-  - Matt Ranostay <matt.ranostay@konsulko.com>
-
-description: |
-  Datasheet at https://www.avagotech.com/docs/AV02-4191EN
-
-properties:
-  compatible:
-    const: avago,apds9960
-
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
-additionalProperties: false
-
-required:
-  - compatible
-  - reg
-
-examples:
-  - |
-    i2c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        light-sensor@39 {
-            compatible = "avago,apds9960";
-            reg = <0x39>;
-            interrupt-parent = <&gpio1>;
-            interrupts = <16 1>;
-        };
-    };
-...
diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
index 1a88b3c253d5..9df81c271411 100644
--- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml
+++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
@@ -24,6 +24,10 @@ properties:
   reg:
     maxItems: 1
 
+  reset-gpios:
+    description: GPIO connected to the DVI reset pin (active low)
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -32,6 +36,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -39,6 +44,7 @@ examples:
       light-sensor@23 {
         compatible = "rohm,bh1750";
         reg = <0x23>;
+        reset-gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
       };
     };
 
diff --git a/Documentation/devicetree/bindings/iio/light/brcm,apds9160.yaml b/Documentation/devicetree/bindings/iio/light/brcm,apds9160.yaml
new file mode 100644
index 000000000000..bb1cc4404a55
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/brcm,apds9160.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/brcm,apds9160.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Combined Proximity & Ambient light sensor
+
+maintainers:
+  - Mikael Gonella-Bolduc <m.gonella.bolduc@gmail.com>
+
+description: |
+  Datasheet: https://docs.broadcom.com/docs/APDS-9160-003-DS
+
+properties:
+  compatible:
+    enum:
+      - brcm,apds9160
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  ps-cancellation-duration:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Proximity sensor cancellation pulse duration in half clock cycles.
+      This parameter determines a cancellation pulse duration.
+      The cancellation is applied in the integration phase to cancel out
+      unwanted reflected light from very near objects such as tempered glass
+      in front of the sensor.
+    default: 0
+    maximum: 63
+
+  ps-cancellation-current-picoamp:
+    description:
+      Proximity sensor crosstalk cancellation current in picoampere.
+      This parameter adjusts the current in steps of 2400 pA up to 276000 pA.
+      The provided value must be a multiple of 2400 and in one of these ranges
+      [60000 - 96000]
+      [120000 - 156000]
+      [180000 - 216000]
+      [240000 - 276000]
+      This parameter is used in conjunction with the cancellation duration.
+    minimum: 60000
+    maximum: 276000
+    multipleOf: 2400
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@53 {
+            compatible = "brcm,apds9160";
+            reg = <0x53>;
+            vdd-supply = <&vdd_reg>;
+            interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&pinctrl>;
+            ps-cancellation-duration = <10>;
+            ps-cancellation-current-picoamp = <62400>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
index a3a979553e32..1472c997c16f 100644
--- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
+++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3010.yaml
@@ -4,14 +4,16 @@
 $id: http://devicetree.org/schemas/iio/light/dynaimage,al3010.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dyna-Image AL3010 sensor
+title: Dyna-Image AL3000a/AL3010 sensor
 
 maintainers:
   - David Heidelberg <david@ixit.cz>
 
 properties:
   compatible:
-    const: dynaimage,al3010
+    enum:
+      - dynaimage,al3000a
+      - dynaimage,al3010
 
   reg:
     maxItems: 1
@@ -40,6 +42,6 @@ examples:
             compatible = "dynaimage,al3010";
             reg = <0x1c>;
             vdd-supply = <&vdd_reg>;
-            interrupts = <0 99 4>;
+            interrupts = <99 IRQ_TYPE_LEVEL_HIGH>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
index 8249be99cff9..d06db737cd9e 100644
--- a/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
+++ b/Documentation/devicetree/bindings/iio/light/dynaimage,al3320a.yaml
@@ -40,6 +40,6 @@ examples:
             compatible = "dynaimage,al3320a";
             reg = <0x1c>;
             vdd-supply = <&vdd_reg>;
-            interrupts = <0 99 4>;
+            interrupts = <99 IRQ_TYPE_LEVEL_HIGH>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml
new file mode 100644
index 000000000000..5d98ef2af74d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltr390.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltr390.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lite-On LTR390 ALS and UV Sensor
+
+description: |
+  The Lite-On LTR390 is an ALS (Ambient Light Sensor) and a UV sensor in a
+  single package with i2c address of 0x53.
+
+  Datasheet:
+    https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - liteon,ltr390
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Level interrupt pin with open drain output.
+      The sensor pulls this pin low when the measured reading is greater than
+      some configured threshold.
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@53 {
+            compatible = "liteon,ltr390";
+            reg = <0x53>;
+            interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&vdd_regulator>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
index db0407bc9209..c8074f180a79 100644
--- a/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
@@ -9,6 +9,9 @@ title: LiteON LTR501 I2C Proximity and Light sensor
 maintainers:
   - Nikita Travkin <nikita@trvn.ru>
 
+allOf:
+  - $ref: ../common.yaml#
+
 properties:
   compatible:
     enum:
@@ -25,6 +28,8 @@ properties:
   interrupts:
     maxItems: 1
 
+  proximity-near-level: true
+
 additionalProperties: false
 
 required:
@@ -42,6 +47,8 @@ examples:
         light-sensor@23 {
             compatible = "liteon,ltr559";
             reg = <0x23>;
+            proximity-near-level = <75>;
+
             vdd-supply = <&pm8916_l17>;
             vddio-supply = <&pm8916_l6>;
 
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
new file mode 100644
index 000000000000..877e955d4ebd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTRF216A Ambient Light Sensor
+
+maintainers:
+  - Shreeya Patel <shreeya.patel@collabora.com>
+
+description:
+  Ambient light sensing with an i2c interface.
+
+properties:
+  compatible:
+    enum:
+      - liteon,ltr308
+      - liteon,ltrf216a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@53 {
+            compatible = "liteon,ltrf216a";
+            reg = <0x53>;
+            vdd-supply = <&vdd_regulator>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml
new file mode 100644
index 000000000000..44896795c67e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bh1745.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/rohm,bh1745.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BH1745 colour sensor
+
+maintainers:
+  - Mudit Sharma <muditsharma.info@gmail.com>
+
+description:
+  BH1745 is an I2C colour sensor with red, green, blue and clear
+  channels. It has a programmable active low interrupt pin.
+  Interrupt occurs when the signal from the selected interrupt
+  source channel crosses set interrupt threshold high/low level.
+
+properties:
+  compatible:
+    const: rohm,bh1745
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        colour-sensor@38 {
+            compatible = "rohm,bh1745";
+            reg = <0x38>;
+            interrupt-parent = <&gpio>;
+            interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+            vdd-supply = <&vdd>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27034anuc.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27034anuc.yaml
new file mode 100644
index 000000000000..29c90ca5b258
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27034anuc.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/rohm,bu27034anuc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BU27034ANUC ambient light sensor
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  ROHM BU27034ANUC is an ambient light sensor with 2 channels and 2 photo diodes
+  capable of detecting a very wide range of illuminance. Typical application
+  is adjusting LCD and backlight power of TVs and mobile phones.
+
+properties:
+  compatible:
+    const: rohm,bu27034anuc
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@38 {
+        compatible = "rohm,bu27034anuc";
+        reg = <0x38>;
+        vdd-supply = <&vdd>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml b/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml
index 27c36ab7990d..8598fb631aac 100644
--- a/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml
+++ b/Documentation/devicetree/bindings/iio/light/st,vl6180.yaml
@@ -32,7 +32,6 @@ required:
 
 examples:
   - |
-    #include <dt-bindings/interrupt-controller/irq.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
index f92bf7b2b7f0..e4341fdced98 100644
--- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
+++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
@@ -13,12 +13,20 @@ maintainers:
 description: |
   Ambient light and proximity sensor over an i2c interface.
 
+allOf:
+  - $ref: ../common.yaml#
+
 properties:
   compatible:
-    enum:
-      - sensortek,stk3310
-      - sensortek,stk3311
-      - sensortek,stk3335
+    oneOf:
+      - enum:
+          - sensortek,stk3310
+          - sensortek,stk3311
+          - sensortek,stk3335
+      - items:
+          - enum:
+              - sensortek,stk3013
+          - const: sensortek,stk3310
 
   reg:
     maxItems: 1
@@ -26,6 +34,8 @@ properties:
   interrupts:
     maxItems: 1
 
+  proximity-near-level: true
+
 required:
   - compatible
   - reg
@@ -44,6 +54,7 @@ examples:
         stk3310@48 {
                 compatible = "sensortek,stk3310";
                 reg = <0x48>;
+                proximity-near-level = <25>;
                 interrupt-parent = <&gpio1>;
                 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
         };
diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml
index 441e9343fc97..67ca8d08256a 100644
--- a/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml
+++ b/Documentation/devicetree/bindings/iio/light/ti,opt3001.yaml
@@ -15,7 +15,9 @@ description: |
 
 properties:
   compatible:
-    const: ti,opt3001
+    enum:
+      - ti,opt3001
+      - ti,opt3002
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml
new file mode 100644
index 000000000000..12b0c7ed5d72
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/ti,opt4001.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ti,opt4001.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OPT4001 Ambient Light Sensor
+
+maintainers:
+  - Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>
+
+description:
+  Ambient light sensor with an i2c interface.
+  Last part of compatible is for the packaging used.
+  Picostar is a 4 pinned SMT and sot-5x3 is a 8 pinned SOT.
+  https://www.ti.com/lit/gpn/opt4001
+
+properties:
+  compatible:
+    enum:
+      - ti,opt4001-picostar
+      - ti,opt4001-sot-5x3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,opt4001-sot-5x3
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+    else:
+      properties:
+        interrupts: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@44 {
+            compatible = "ti,opt4001-sot-5x3";
+            reg = <0x44>;
+            vdd-supply = <&vdd_reg>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/ti,opt4060.yaml b/Documentation/devicetree/bindings/iio/light/ti,opt4060.yaml
new file mode 100644
index 000000000000..568fb2a9b7a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/ti,opt4060.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ti,opt4060.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OPT4060 RGBW Color Sensor
+
+maintainers:
+  - Per-Daniel Olsson <perdaniel.olsson@axis.com>
+
+description:
+  Texas Instrument RGBW high resolution color sensor over I2C.
+  https://www.ti.com/lit/gpn/opt4060
+
+properties:
+  compatible:
+    enum:
+      - ti,opt4060
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@44 {
+            compatible = "ti,opt4060";
+            reg = <0x44>;
+            vdd-supply = <&vdd_reg>;
+            interrupt-parent = <&gpio5>;
+            interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
deleted file mode 100644
index fb19a2d7a849..000000000000
--- a/Documentation/devicetree/bindings/iio/light/veml6030.yaml
+++ /dev/null
@@ -1,64 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/iio/light/veml6030.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: VEML6030 Ambient Light Sensor (ALS)
-
-maintainers:
-  - Rishi Gupta <gupt21@gmail.com>
-
-description: |
-  Bindings for the ambient light sensor veml6030 from Vishay
-  Semiconductors over an i2c interface.
-
-  Irrespective of whether interrupt is used or not, application
-  can get the ALS and White channel reading from IIO raw interface.
-
-  If the interrupts are used, application will receive an IIO event
-  whenever configured threshold is crossed.
-
-  Specifications about the sensor can be found at:
-    https://www.vishay.com/docs/84366/veml6030.pdf
-
-properties:
-  compatible:
-    enum:
-      - vishay,veml6030
-
-  reg:
-    description:
-      I2C address of the device.
-    enum:
-      - 0x10 # ADDR pin pulled down
-      - 0x48 # ADDR pin pulled up
-
-  interrupts:
-    description:
-      interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW.
-      Refer to interrupt-controller/interrupts.txt for generic
-      interrupt client node bindings.
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/irq.h>
-
-    i2c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        light-sensor@10 {
-                compatible = "vishay,veml6030";
-                reg = <0x10>;
-                interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
-        };
-    };
-...
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml b/Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml
new file mode 100644
index 000000000000..4ea69f1fdd63
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/vishay,veml6030.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,veml6030.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VEML3235, VEML6030, VEML6035 and VEML7700 Ambient Light Sensors (ALS)
+
+maintainers:
+  - Rishi Gupta <gupt21@gmail.com>
+
+description: |
+  Bindings for the ambient light sensors veml6030 and veml6035 from
+  Vishay Semiconductors over an i2c interface.
+
+  Irrespective of whether interrupt is used or not, application
+  can get the ALS and White channel reading from IIO raw interface.
+
+  If the interrupts are used, application will receive an IIO event
+  whenever configured threshold is crossed.
+
+  Specifications about the sensors can be found at:
+    https://www.vishay.com/docs/80131/veml3235.pdf
+    https://www.vishay.com/docs/84366/veml6030.pdf
+    https://www.vishay.com/docs/84889/veml6035.pdf
+    https://www.vishay.com/docs/84286/veml7700.pdf
+
+properties:
+  compatible:
+    enum:
+      - vishay,veml3235
+      - vishay,veml6030
+      - vishay,veml6035
+      - vishay,veml7700
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      interrupt mapping for IRQ. Configure with IRQ_TYPE_LEVEL_LOW.
+      Refer to interrupt-controller/interrupts.txt for generic
+      interrupt client node bindings.
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - vishay,veml6030
+    then:
+      properties:
+        reg:
+          enum:
+            - 0x10  # ADDR pin pulled down
+            - 0x48  # ADDR pin pulled up
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - vishay,veml6035
+    then:
+      properties:
+        reg:
+          enum:
+            - 0x29
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - vishay,veml3235
+            - vishay,veml7700
+    then:
+      properties:
+        reg:
+          enum:
+            - 0x10
+        interrupts: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@10 {
+                compatible = "vishay,veml6030";
+                reg = <0x10>;
+                interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+                vdd-supply = <&vdd>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,veml6046x00.yaml b/Documentation/devicetree/bindings/iio/light/vishay,veml6046x00.yaml
new file mode 100644
index 000000000000..112d448ff0bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/vishay,veml6046x00.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,veml6046x00.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vishay VEML6046X00 High accuracy RGBIR color sensor
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description:
+  VEML6046X00 datasheet at https://www.vishay.com/docs/80173/veml6046x00.pdf
+
+properties:
+  compatible:
+    enum:
+      - vishay,veml6046x00
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        color-sensor@29 {
+            compatible = "vishay,veml6046x00";
+            reg = <0x29>;
+            vdd-supply = <&vdd_reg>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
new file mode 100644
index 000000000000..d2effccbfb56
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/vishay,veml6075.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/vishay,veml6075.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Vishay VEML6070 UVA, VEML6075 UVA/B and VEML6040 RGBW sensors
+
+maintainers:
+  - Javier Carrasco <javier.carrasco.cruz@gmail.com>
+
+description:
+  VEML6040 datasheet at https://www.vishay.com/docs/84276/veml6040.pdf
+
+properties:
+  compatible:
+    enum:
+      - vishay,veml6040
+      - vishay,veml6070
+      - vishay,veml6075
+
+  reg:
+    maxItems: 1
+
+  vishay,rset-ohms:
+    description:
+      Resistor used to select the integration time.
+    default: 270000
+    minimum: 75000
+    maximum: 1200000
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - vishay,veml6040
+            - vishay,veml6075
+    then:
+      properties:
+        vishay,rset-ohms: false
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        uv-sensor@10 {
+            compatible = "vishay,veml6075";
+            reg = <0x10>;
+            vdd-supply = <&vdd_reg>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/allegromicro,als31300.yaml b/Documentation/devicetree/bindings/iio/magnetometer/allegromicro,als31300.yaml
new file mode 100644
index 000000000000..52e3781834ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/allegromicro,als31300.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/allegromicro,als31300.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allegro MicroSystems ALS31300 3-D Linear Hall Effect sensor
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  $nodename:
+    pattern: '^magnetometer@[0-9a-f]+$'
+
+  compatible:
+    enum:
+      - allegromicro,als31300-500 # Factory configured at 500 Gauss input range
+      - allegromicro,als31300-1000 # Factory configured at 1000 Gauss input range
+      - allegromicro,als31300-2000 # Factory configured at 2000 Gauss input range
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: 5.5V supply
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      magnetometer@61 {
+        compatible = "allegromicro,als31300-500";
+        reg = <0x61>;
+        vcc-supply = <&hall_vcc>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
index 9790f75fc669..e8ca9a234027 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
@@ -18,12 +18,15 @@ properties:
           - asahi-kasei,ak09911
           - asahi-kasei,ak09912
           - asahi-kasei,ak09916
+      - items:
+          # ak09918 is register compatible with ak09912.
+          - const: asahi-kasei,ak09918
+          - const: asahi-kasei,ak09912
       - enum:
           - ak8975
           - ak8963
           - ak09911
           - ak09912
-          - ak09916
         deprecated: true
 
   reg:
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml
index 2867ab6bf9b0..a3838ab0c524 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/bosch,bmc150_magn.yaml
@@ -36,6 +36,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
 additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml b/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml
index 6b54d32323fc..fbe8c2eb0857 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/fsl,mag3110.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale MAG3110 magnetometer sensor
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml b/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml
new file mode 100644
index 000000000000..dd23a9370a71
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/infineon,tlv493d-a1b6.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/infineon,tlv493d-a1b6.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon Technologies TLV493D Low-Power 3D Magnetic Sensor
+
+maintainers:
+  - Dixit Parmar <dixitparmar19@gmail.com>
+
+properties:
+  $nodename:
+    pattern: '^magnetometer@[0-9a-f]+$'
+
+  compatible:
+    const: infineon,tlv493d-a1b6
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: 2.8V to 3.5V VDD supply
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      magnetometer@5e {
+        compatible = "infineon,tlv493d-a1b6";
+        reg = <0x5e>;
+        vdd-supply = <&hall_vcc>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/silabs,si7210.yaml b/Documentation/devicetree/bindings/iio/magnetometer/silabs,si7210.yaml
new file mode 100644
index 000000000000..d4a3f7981c36
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/silabs,si7210.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/silabs,si7210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Si7210 magnetic position and temperature sensor
+
+maintainers:
+  - Antoni Pokusinski <apokusinski01@gmail.com>
+
+description: |
+  Silabs Si7210 I2C Hall effect magnetic position and temperature sensor.
+  https://www.silabs.com/documents/public/data-sheets/si7210-datasheet.pdf
+
+properties:
+  compatible:
+    const: silabs,si7210
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        magnetometer@30 {
+            compatible = "silabs,si7210";
+            reg = <0x30>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&vdd_3v3_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
new file mode 100644
index 000000000000..121d540b7b6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor
+
+maintainers:
+  - Gerald Loacker <gerald.loacker@wolfvision.net>
+
+description:
+  The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device
+  integrates three independent Hall-effect sensors in the X, Y, and Z axes.
+  The device has an integrated temperature sensor available. The TMAG5273
+  can be configured through the I2C interface to enable any combination of
+  magnetic axes and temperature measurements. An integrated angle calculation
+  engine (CORDIC) provides full 360° angular position information for both
+  on-axis and off-axis angle measurement topologies. The angle calculation is
+  performed using two user-selected magnetic axes.
+
+properties:
+  compatible:
+    const: ti,tmag5273
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  ti,angle-measurement:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Enables angle measurement in the selected plane.
+      If not specified, "x-y" will be anables as default.
+    enum:
+      - off
+      - x-y
+      - y-z
+      - x-z
+
+  vcc-supply:
+    description:
+      A regulator providing 1.7 V to 3.6 V supply voltage on the VCC pin,
+      typically 3.3 V.
+
+  interrupts:
+    description:
+      The low active interrupt can be configured to be fixed width or latched.
+      Interrupt events can be configured to be generated from magnetic
+      thresholds or when a conversion is completed.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@35 {
+            compatible = "ti,tmag5273";
+            reg = <0x35>;
+            #io-channel-cells = <1>;
+            ti,angle-measurement = "x-z";
+            vcc-supply = <&vcc3v3>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml b/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml
new file mode 100644
index 000000000000..ed42dc5afb99
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/voltafield,af8133j.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/voltafield,af8133j.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Voltafield AF8133J magnetometer sensor
+
+maintainers:
+  - Ondřej Jirman <megi@xff.cz>
+
+properties:
+  compatible:
+    const: voltafield,af8133j
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      A signal for active low reset input of the sensor. (optional; if not
+      used, software reset over I2C will be used instead)
+
+  avdd-supply:
+    description:
+      A regulator that provides AVDD power (Working power, usually 3.3V) to
+      the sensor.
+
+  dvdd-supply:
+    description:
+      A regulator that provides DVDD power (Digital IO power, 1.8V - AVDD)
+      to the sensor.
+
+  mount-matrix:
+    description: An optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - dvdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@1c {
+            compatible = "voltafield,af8133j";
+            reg = <0x1c>;
+            avdd-supply = <&reg_dldo1>;
+            dvdd-supply = <&reg_dldo1>;
+            reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
index 4b0ef1ef5445..877226e9219b 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
@@ -91,12 +91,12 @@ examples:
         #size-cells = <0>;
 
         magnetometer@2e {
-          compatible = "yamaha,yas530";
-          reg = <0x2e>;
-          vdd-supply = <&ldo1_reg>;
-          iovdd-supply = <&ldo2_reg>;
-          reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
-          interrupts = <&gpio6 13 IRQ_TYPE_EDGE_RISING>;
+            compatible = "yamaha,yas530";
+            reg = <0x2e>;
+            vdd-supply = <&ldo1_reg>;
+            iovdd-supply = <&ldo2_reg>;
+            reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+            interrupts = <13 IRQ_TYPE_EDGE_RISING>;
         };
     };
 
@@ -105,8 +105,8 @@ examples:
         #size-cells = <0>;
 
         magnetometer@2e {
-          compatible = "yamaha,yas539";
-          reg = <0x2e>;
-          vdd-supply = <&ldo1_reg>;
+            compatible = "yamaha,yas539";
+            reg = <0x2e>;
+            vdd-supply = <&ldo1_reg>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml
index 611ad4444cf0..c55831b60ee6 100644
--- a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml
+++ b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/multiplexer/io-channel-mux.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: I/O channel multiplexer bindings
+title: I/O channel multiplexer
 
 maintainers:
   - Peter Rosin <peda@axentia.se>
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
index 0ebb6725a1af..b8d7083c97f8 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
@@ -44,7 +44,7 @@ examples:
 
         potentiometer@2f {
             compatible = "adi,ad5272-020";
-            reg = <0x2F>;
+            reg = <0x2f>;
             reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
index 567697d996ec..87e88f2a9908 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
@@ -25,14 +25,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
index 945a2d644ddc..896fe0b5edcc 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
@@ -80,14 +80,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
@@ -95,7 +96,7 @@ examples:
         #size-cells = <0>;
 
         potentiometer@0 {
-            compatible = "mcp4131-502";
+            compatible = "microchip,mcp4131-502";
             reg = <0>;
             spi-max-frequency = <500000>;
         };
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
new file mode 100644
index 000000000000..ab5c09c00ff4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/renesas,x9250.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/potentiometer/renesas,x9250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas X9250 quad potentiometers
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+description:
+  The Renesas X9250 integrates four digitally controlled potentiometers.
+  On each potentiometer, the X9250T has a 100 kOhms total resistance and the
+  X9250U has a 50 kOhms total resistance.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+properties:
+  compatible:
+    enum:
+      - renesas,x9250t
+      - renesas,x9250u
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      Regulator for the VCC power supply.
+
+  avp-supply:
+    description:
+      Regulator for the analog V+ power supply.
+
+  avn-supply:
+    description:
+      Regulator for the analog V- power supply.
+
+  '#io-channel-cells':
+    const: 1
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  wp-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the write-protect pin.
+
+required:
+  - compatible
+  - reg
+  - vcc-supply
+  - avp-supply
+  - avn-supply
+  - '#io-channel-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        potentiometer@0 {
+            compatible = "renesas,x9250t";
+            reg = <0>;
+            vcc-supply = <&vcc_regulator>;
+            avp-supply = <&avp_regulator>;
+            avn-supply = <&avp_regulator>;
+            wp-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+            spi-max-frequency = <2000000>;
+            #io-channel-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml b/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml
new file mode 100644
index 000000000000..ad5f26ce5043
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/aosong,adp810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: aosong adp810 differential pressure sensor
+
+maintainers:
+  - Akhilesh Patil <akhilesh@ee.iitb.ac.in>
+
+description:
+  ADP810 is differential pressure and temperature sensor. It has I2C bus
+  interface with fixed address of 0x25. This sensor supports 8 bit CRC for
+  reliable data transfer. It can measure differential pressure in the
+  range -500 to 500Pa and temperate in the range -40 to +85 degree celsius.
+
+properties:
+  compatible:
+    enum:
+      - aosong,adp810
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure-sensor@25 {
+            compatible = "aosong,adp810";
+            reg = <0x25>;
+            vdd-supply = <&vdd_regulator>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index be2be4b556db..9fb8d773efa3 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: All Sensors DLH series low voltage digital pressure sensors
 
 maintainers:
-  - Tomislav Denis <tomislav.denis@avl.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   Bindings for the All Sensors DLH series pressure sensors.
@@ -39,7 +39,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 49257f9251e8..b9ea37317b53 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: BMP085/BMP180/BMP280/BME280 pressure iio sensors
+title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors
 
 maintainers:
   - Andreas Klinger <ak@it-klinger.de>
@@ -16,6 +16,8 @@ description: |
     https://www.bosch-sensortec.com/bst/products/all_products/bmp180
     https://www.bosch-sensortec.com/bst/products/all_products/bmp280
     https://www.bosch-sensortec.com/bst/products/all_products/bme280
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp380
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp580
 
 properties:
   compatible:
@@ -24,6 +26,8 @@ properties:
       - bosch,bmp180
       - bosch,bmp280
       - bosch,bme280
+      - bosch,bmp380
+      - bosch,bmp580
 
   reg:
     maxItems: 1
@@ -43,31 +47,77 @@ properties:
     maxItems: 1
 
   interrupts:
-    description:
-      interrupt mapping for IRQ (BMP085 only)
     maxItems: 1
 
+  drive-open-drain:
+    description:
+      set if the interrupt pin should be configured as open drain.
+      If not set, defaults to push-pull configuration.
+    type: boolean
+
+  spi-max-frequency:
+    maximum: 10000000
+
 required:
   - compatible
   - vddd-supply
   - vdda-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - bosch,bmp085
+                - bosch,bmp380
+                - bosch,bmp580
+    then:
+      properties:
+        interrupts: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - bosch,bmp085
+              - bosch,bmp180
+    then:
+      properties:
+        spi-max-frequency: false
+
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      pressure@77 {
-          compatible = "bosch,bmp085";
-          reg = <0x77>;
-          interrupt-parent = <&gpio0>;
-          interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-          reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-          vddd-supply = <&foo>;
-          vdda-supply = <&bar>;
-      };
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@77 {
+            compatible = "bosch,bmp085";
+            reg = <0x77>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+            vddd-supply = <&foo>;
+            vdda-supply = <&bar>;
+        };
+    };
+  - |
+    # include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@0 {
+            compatible = "bosch,bmp280";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+            vddd-supply = <&foo>;
+            vdda-supply = <&bar>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml b/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml
new file mode 100644
index 000000000000..2933c2e10695
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/fsl,mpl3115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MPL3115 precision pressure sensor with altimetry
+
+maintainers:
+  - Antoni Pokusinski <apokusinski01@gmail.com>
+
+description: |
+  MPL3115 is a pressure/altitude and temperature sensor with I2C interface.
+  It features two programmable interrupt lines which indicate events such as
+  data ready or pressure/temperature threshold reached.
+  https://www.nxp.com/docs/en/data-sheet/MPL3115A2.pdf
+
+properties:
+  compatible:
+    const: fsl,mpl3115
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  vddio-supply: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+  drive-open-drain:
+    type: boolean
+    description:
+      set if the specified interrupt pins should be configured as
+      open drain. If not set, defaults to push-pull.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@60 {
+            compatible = "fsl,mpl3115";
+            reg = <0x60>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "INT2";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
new file mode 100644
index 000000000000..412c7bcc310f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,hsc030pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell TruStability HSC and SSC pressure sensor series
+
+description: |
+  support for Honeywell TruStability HSC and SSC digital pressure sensor
+  series.
+
+  These sensors have either an I2C, an SPI or an analog interface. Only the
+  digital versions are supported by this driver.
+
+  There are 118 models with different pressure ranges available in each family.
+  The vendor calls them "HSC series" and "SSC series". All of them have an
+  identical programming model but differ in pressure range, unit and transfer
+  function.
+
+  To support different models one needs to specify the pressure range as well
+  as the transfer function. Pressure range can either be provided via
+  pressure-triplet (directly extracted from the part number) or in case it's
+  a custom chip via numerical range limits converted to pascals.
+
+  The transfer function defines the ranges of raw conversion values delivered
+  by the sensor. pmin-pascal and pmax-pascal corespond to the minimum and
+  maximum pressure that can be measured.
+
+  Please note that in case of an SPI-based sensor, the clock signal should not
+  exceed 800kHz and the MOSI signal is not required.
+
+  Specifications about the devices can be found at:
+  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf
+  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf
+
+maintainers:
+  - Petre Rodan <petre.rodan@subdimension.ro>
+
+properties:
+  compatible:
+    const: honeywell,hsc030pa
+
+  reg:
+    maxItems: 1
+
+  honeywell,transfer-function:
+    description: |
+      Transfer function which defines the range of valid values delivered by
+      the sensor.
+      0 - A, 10% to 90% of 2^14
+      1 - B, 5% to 95% of 2^14
+      2 - C, 5% to 85% of 2^14
+      3 - F, 4% to 94% of 2^14
+    enum: [0, 1, 2, 3]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  honeywell,pressure-triplet:
+    description: |
+      Case-sensitive five character string that defines pressure range, unit
+      and type as part of the device nomenclature. In the unlikely case of a
+      custom chip, set to "NA" and provide pmin-pascal and pmax-pascal.
+    enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 010BA, 1.6MD, 2.5MD, 004MD,
+           006MD, 010MD, 016MD, 025MD, 040MD, 060MD, 100MD, 160MD, 250MD,
+           400MD, 600MD, 001BD, 1.6BD, 2.5BD, 004BD, 2.5MG, 004MG, 006MG,
+           010MG, 016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG,
+           600MG, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 010BG, 100KA, 160KA,
+           250KA, 400KA, 600KA, 001GA, 160LD, 250LD, 400LD, 600LD, 001KD,
+           1.6KD, 2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD,
+           100KD, 160KD, 250KD, 400KD, 250LG, 400LG, 600LG, 001KG, 1.6KG,
+           2.5KG, 004KG, 006KG, 010KG, 016KG, 025KG, 040KG, 060KG, 100KG,
+           160KG, 250KG, 400KG, 600KG, 001GG, 015PA, 030PA, 060PA, 100PA,
+           150PA, 0.5ND, 001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND,
+           001PD, 005PD, 015PD, 030PD, 060PD, 001NG, 002NG, 004NG, 005NG,
+           010NG, 020NG, 030NG, 001PG, 005PG, 015PG, 030PG, 060PG, 100PG,
+           150PG, NA]
+    $ref: /schemas/types.yaml#/definitions/string
+
+  honeywell,pmin-pascal:
+    description: |
+      Minimum pressure value the sensor can measure in pascal.
+      To be specified only if honeywell,pressure-triplet is set to "NA".
+
+  honeywell,pmax-pascal:
+    description: |
+      Maximum pressure value the sensor can measure in pascal.
+      To be specified only if honeywell,pressure-triplet is set to "NA".
+
+  vdd-supply:
+    description:
+      Provide VDD power to the sensor (either 3.3V or 5V depending on the chip)
+
+  spi-max-frequency:
+    maximum: 800000
+
+required:
+  - compatible
+  - reg
+  - honeywell,transfer-function
+  - honeywell,pressure-triplet
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+unevaluatedProperties: false
+
+dependentSchemas:
+  honeywell,pmin-pascal:
+    properties:
+      honeywell,pressure-triplet:
+        const: NA
+  honeywell,pmax-pascal:
+    properties:
+      honeywell,pressure-triplet:
+        const: NA
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@28 {
+            compatible = "honeywell,hsc030pa";
+            reg = <0x28>;
+            honeywell,transfer-function = <0>;
+            honeywell,pressure-triplet = "030PA";
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,hsc030pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+            honeywell,transfer-function = <0>;
+            honeywell,pressure-triplet = "NA";
+            honeywell,pmin-pascal = <0>;
+            honeywell,pmax-pascal = <200000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
new file mode 100644
index 000000000000..c756aa863103
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell mprls0025pa pressure sensor
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+  - Petre Rodan <petre.rodan@subdimension.ro>
+
+description: |
+  Honeywell pressure sensor of model mprls0025pa.
+
+  This sensor has an I2C and SPI interface.
+
+  There are many models with different pressure ranges available. The vendor
+  calls them "mpr series". All of them have the identical programming model and
+  differ in the pressure range, unit and transfer function.
+
+  To support different models one need to specify its pressure triplet as well
+  as the transfer function.
+
+  For custom silicon chips not covered by the Honeywell MPR series datasheet,
+  the pressure values can be specified manually via honeywell,pmin-pascal and
+  honeywell,pmax-pascal.
+  The minimal range value stands for the minimum pressure and the maximum value
+  also for the maximum pressure with linear relation inside the range.
+
+  The transfer function defines the ranges of numerical values delivered by the
+  sensor.
+
+  Specifications about the devices can be found at:
+    https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
+      products/sensors/pressure-sensors/board-mount-pressure-sensors/
+      micropressure-mpr-series/documents/
+      sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf
+
+properties:
+  compatible:
+    const: honeywell,mprls0025pa
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Optional interrupt for indicating End-of-conversion.
+      If not present, the driver loops for a while until the received status
+      byte indicates correct measurement.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Optional GPIO for resetting the device.
+      If not present the device is not reset during the probe.
+    maxItems: 1
+
+  honeywell,transfer-function:
+    description: |
+      Transfer function which defines the range of valid values delivered by the
+      sensor.
+      1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
+      2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
+      3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
+    enum: [1, 2, 3]
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  honeywell,pressure-triplet:
+    description: |
+      Case-sensitive five character string that defines pressure range, unit
+      and type as part of the device nomenclature. In the unlikely case of a
+      custom chip, unset and provide pmin-pascal and pmax-pascal instead.
+    enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG,
+           0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG,
+           0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG,
+           0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG]
+    $ref: /schemas/types.yaml#/definitions/string
+
+  honeywell,pmin-pascal:
+    description:
+      Minimum pressure value the sensor can measure in pascal.
+
+  honeywell,pmax-pascal:
+    description:
+      Maximum pressure value the sensor can measure in pascal.
+
+  spi-max-frequency:
+    maximum: 800000
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+required:
+  - compatible
+  - reg
+  - honeywell,transfer-function
+  - vdd-supply
+
+oneOf:
+  - required:
+      - honeywell,pressure-triplet
+  - required:
+      - honeywell,pmin-pascal
+      - honeywell,pmax-pascal
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+  - if:
+      required:
+        - honeywell,pressure-triplet
+    then:
+      properties:
+        honeywell,pmin-pascal: false
+        honeywell,pmax-pascal: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@18 {
+            compatible = "honeywell,mprls0025pa";
+            reg = <0x18>;
+            reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0025PA";
+            honeywell,transfer-function = <1>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,mprls0025pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+            reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <30 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0015PA";
+            honeywell,transfer-function = <1>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
new file mode 100644
index 000000000000..e5d1e6c48939
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/infineon,dps310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon DPS310 barometric pressure and temperature sensor
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The DPS310 is a barometric pressure and temperature sensor with an I2C
+  interface.
+
+properties:
+  compatible:
+    enum:
+      - infineon,dps310
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 0
+
+  vdd-supply:
+    description:
+      Voltage supply for the chip's analog blocks.
+
+  vddio-supply:
+    description:
+      Digital voltage supply for the chip's digital blocks and I/O interface.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dps: pressure-sensor@76 {
+          compatible = "infineon,dps310";
+          reg = <0x76>;
+          #io-channel-cells = <0>;
+          vdd-supply = <&vref1>;
+          vddio-supply = <&vref2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/invensense,icp10100.yaml b/Documentation/devicetree/bindings/iio/pressure/invensense,icp10100.yaml
new file mode 100644
index 000000000000..5d980aa04bb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/invensense,icp10100.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/invensense,icp10100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: InvenSense ICP-101xx Barometric Pressure Sensors
+
+maintainers:
+  - Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
+
+description: |
+  Support for ICP-101xx family: ICP-10100, ICP-10101, ICP-10110, ICP-10111.
+  Those devices uses a simple I2C communication bus, measuring the pressure
+  in a ultra-low noise at the lowest power.
+  Datasheet: https://product.tdk.com/system/files/dam/doc/product/sensor/pressure/capacitive-pressure/data_sheet/ds-000186-icp-101xx.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - invensense,icp10101
+              - invensense,icp10110
+              - invensense,icp10111
+          - const: invensense,icp10100
+      - const: invensense,icp10100
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@63 {
+            compatible = "invensense,icp10101", "invensense,icp10100";
+            reg = <0x63>;
+            vdd-supply = <&vdd_1v8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml b/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml
index 4f06707450bf..21e6ddb7f41e 100644
--- a/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml
@@ -30,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -52,6 +55,7 @@ examples:
             compatible = "meas,ms5611";
             reg = <0>;
             vdd-supply = <&ldo_3v3_gnss>;
+            spi-max-frequency = <20000000>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
index d6103be03460..886f4129c301 100644
--- a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
@@ -12,7 +12,6 @@ maintainers:
 description: |
   Pressure sensor from Murata with SPI and I2C bus interfaces.
 
-
 properties:
   compatible:
     const: murata,zpa2326
@@ -33,7 +32,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml b/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml
new file mode 100644
index 000000000000..7c4ca6322bf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/rohm,bm1390.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/rohm,bm1390.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BM1390 pressure sensor
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description:
+  BM1390GLV-Z is a pressure sensor which performs internal temperature
+  compensation for the MEMS. Pressure range is from 300 hPa to 1300 hPa
+  and sample averaging and IIR filtering is built in. Temperature
+  measurement is also supported.
+
+properties:
+  compatible:
+    const: rohm,bm1390glv-z
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure-sensor@5d {
+            compatible = "rohm,bm1390glv-z";
+            reg = <0x5d>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+            vdd-supply = <&vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml b/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml
new file mode 100644
index 000000000000..813239f6879a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/sensirion,sdp500.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/sensirion,sdp500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: sdp500/sdp510 pressure sensor with I2C bus interface
+
+maintainers:
+  - Petar Stoykov <petar.stoykov@prodrive-technologies.com>
+
+description: |
+  Pressure sensor from Sensirion with I2C bus interface.
+  There is no software difference between sdp500 and sdp510.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: sensirion,sdp510
+          - const: sensirion,sdp500
+      - const: sensirion,sdp500
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pressure@40 {
+        compatible = "sensirion,sdp500";
+        reg = <0x40>;
+        vdd-supply = <&foo>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
index 7fcba5d6d508..9567993ce480 100644
--- a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Matt Ranostay <matt.ranostay@konsulko.com>
 
 description:
-  This lightening distance sensor uses an I2C or SPI interface. The
+  This lightning distance sensor uses an I2C or SPI interface. The
   binding currently only covers the SPI option.
 
 properties:
@@ -49,7 +49,10 @@ required:
   - spi-cpha
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -57,7 +60,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-    lightning@0 {
+        lightning@0 {
             compatible = "ams,as3935";
             reg = <0>;
             spi-max-frequency = <400000>;
diff --git a/Documentation/devicetree/bindings/iio/proximity/awinic,aw96103.yaml b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96103.yaml
new file mode 100644
index 000000000000..7a83ceced11c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/awinic,aw96103.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/awinic,aw96103.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic's AW96103 capacitive proximity sensor and similar
+
+maintainers:
+  - Wang Shuaijie <wangshuaijie@awinic.com>
+
+description: |
+  Awinic's AW96103/AW96105 proximity sensor.
+  The specific absorption rate (SAR) is a metric that measures
+  the degree of absorption of electromagnetic radiation emitted by
+  wireless devices, such as mobile phones and tablets, by human tissue.
+  In mobile phone applications, the proximity sensor is primarily
+  used to detect the proximity of the human body to the phone. When the
+  phone approaches the human body, it will actively reduce the transmit
+  power of the antenna to keep the SAR within a safe range. Therefore,
+  we also refer to the proximity sensor as a SAR sensor.
+
+properties:
+  compatible:
+    enum:
+      - awinic,aw96103
+      - awinic,aw96105
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by the device to announce that a close/far
+      proximity event has happened.
+    maxItems: 1
+
+  vcc-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        proximity@12 {
+            compatible = "awinic,aw96103";
+            reg = <0x12>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+            vcc-supply = <&pp1800_prox>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
index 099b4be927d4..d4e09d2dcd21 100644
--- a/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
@@ -10,7 +9,6 @@ title: ChromeOS EC MKBP Proximity Sensor
 maintainers:
   - Stephen Boyd <swboyd@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   Google's ChromeOS EC sometimes has the ability to detect user proximity.
diff --git a/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml b/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml
new file mode 100644
index 000000000000..67f5389ece67
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/murata,irsd200.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/murata,irsd200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Murata IRS-D200 PIR sensor
+
+maintainers:
+  - Waqar Hameed <waqar.hameed@axis.com>
+
+description:
+  PIR sensor for human detection.
+
+properties:
+  compatible:
+    const: murata,irsd200
+
+  reg:
+    items:
+      - enum:
+          - 0x48
+          - 0x49
+        description: |
+          When the AD pin is connected to GND, the slave address is 0x48.
+          When the AD pin is connected to VDD, the slave address is 0x49.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Type should be IRQ_TYPE_EDGE_RISING.
+
+  vdd-supply:
+    description:
+      3.3 V supply voltage.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@48 {
+            compatible = "murata,irsd200";
+            reg = <0x48>;
+            interrupts = <24 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&regulator_3v3>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/nicera,d3323aa.yaml b/Documentation/devicetree/bindings/iio/proximity/nicera,d3323aa.yaml
new file mode 100644
index 000000000000..65d9b44fcd5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/nicera,d3323aa.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/nicera,d3323aa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nicera D3-323-AA PIR sensor
+
+maintainers:
+  - Waqar Hameed <waqar.hameed@axis.com>
+
+description: |
+  PIR sensor for human detection.
+  Datasheet: https://www.endrich.com/Datenbl%C3%A4tter/Sensoren/D3-323-AA_e.pdf
+
+properties:
+  compatible:
+    const: nicera,d3323aa
+
+  vdd-supply:
+    description:
+      Supply voltage (1.8 to 5.5 V).
+
+  vout-clk-gpios:
+    maxItems: 1
+    description:
+      GPIO for clock and detection.
+      After reset, the device signals with two falling edges on this pin that it
+      is ready for configuration (within 1.2 s).
+      During configuration, it is used as clock for data reading and writing (on
+      data-gpios).
+      After all this, when device is in operational mode, it signals on this pin
+      for any detections.
+
+  data-gpios:
+    maxItems: 1
+    description:
+      GPIO for data reading and writing. This is denoted "DO (SI)" in datasheet.
+      During configuration, this pin is used for writing and reading
+      configuration data (together with vout-clk-gpios as clock).
+      After this, during operational mode, the device will output serial data on
+      this GPIO.
+
+required:
+  - compatible
+  - vdd-supply
+  - vout-clk-gpios
+  - data-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    proximity {
+        compatible = "nicera,d3323aa";
+        vdd-supply = <&regulator_3v3>;
+        vout-clk-gpios = <&gpio 78 GPIO_ACTIVE_HIGH>;
+        data-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
index 5de0bb2180e6..775555d147bf 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -15,6 +15,9 @@ description: |
   Specifications about the devices can be found at:
   https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310
 
+allOf:
+  - $ref: /schemas/iio/iio.yaml#
+
 properties:
   compatible:
     enum:
@@ -102,7 +105,7 @@ required:
   - reg
   - "#io-channel-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
new file mode 100644
index 000000000000..8fed45ee557b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
@@ -0,0 +1,202 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9324.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9324 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9324 proximity sensor.
+
+allOf:
+  - $ref: /schemas/iio/iio.yaml#
+
+properties:
+  compatible:
+    const: semtech,sx9324
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,ph0-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of 3 entries. Index represent the id of the CS pin.
+      Value indicates how each CS pin is used during phase 0.
+      Each of the 3 pins have the following value -
+      0 : unused (high impedance)
+      1 : measured input
+      2 : dynamic shield
+      3 : grounded.
+      For instance, CS0 measured, CS1 shield and CS2 ground is [1, 2, 3]
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph1-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 1.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph2-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 2.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph3-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 3.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph01-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 0 and 1.
+      Higher the number, higher the resolution.
+    default: 128
+
+  semtech,ph23-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 2 and 3
+    default: 128
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Phase used for start-up proximity detection.
+      It is used when we enable a phase to remove static offset and measure
+      only capacitance changes introduced by the user.
+
+  semtech,ph01-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for phase 0 and 1. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,ph23-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      Same as proxraw-strength01, for phase 2 and 3.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+  semtech,cs-idle-sleep:
+    description:
+      State of CS pins during sleep mode and idle time.
+    enum:
+      - hi-z
+      - gnd
+      - vdd
+
+  semtech,int-comp-resistor:
+    description:
+      Internal resistor setting for compensation.
+    enum:
+      - lowest
+      - low
+      - high
+      - highest
+
+  semtech,input-precharge-resistor-ohms:
+    default: 4000
+    multipleOf: 2000
+    minimum: 0
+    maximum: 30000
+    description:
+      Pre-charge input resistance in Ohm.
+
+  semtech,input-analog-gain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: |
+      Defines the input antenna analog gain
+      0: x1.247
+      1: x1 (default)
+      2: x0.768
+      3: x0.552
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9324";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,ph0-pin = <1 2 3>;
+        semtech,ph1-pin = <3 2 1>;
+        semtech,ph2-pin = <1 2 3>;
+        semtech,ph3-pin = <3 2 1>;
+        semtech,ph01-resolution = <256>;
+        semtech,ph23-resolution = <256>;
+        semtech,startup-sensor = <1>;
+        semtech,ph01-proxraw-strength = <2>;
+        semtech,ph23-proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+        semtech,int-comp-resistor = "lowest";
+        semtech,input-precharge-resistor-ohms = <2000>;
+        semtech,cs-idle-sleep = "gnd";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
new file mode 100644
index 000000000000..ad0bb44f41b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9360 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9360 proximity sensor.
+
+properties:
+  compatible:
+    const: semtech,sx9360
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For both phases, "reference" and
+      "measurement". Higher the number, higher the resolution.
+    default: 128
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for both phases. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+  semtech,input-precharge-resistor-ohms:
+    default: 0
+    multipleOf: 2000
+    minimum: 0
+    maximum: 30000
+    description:
+      Pre-charge input resistance in Ohm.
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9360";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,resolution = <256>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+        semtech,input-precharge-resistor-ohms = <4000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
index 656460d9d8c8..322befc41de6 100644
--- a/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
@@ -19,6 +19,11 @@ properties:
   interrupts:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply: true
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml
new file mode 100644
index 000000000000..64ce8bc8bd36
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TYHX HX9023S capacitive proximity sensor
+
+maintainers:
+  - Yasin Lee <yasin.lee.x@gmail.com>
+
+description: |
+  TYHX HX9023S proximity sensor. Datasheet can be found here:
+    http://www.tianyihexin.com/ueditor/php/upload/file/20240614/1718336303992081.pdf
+
+properties:
+  compatible:
+    const: tyhx,hx9023s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@[0-4]$":
+    $ref: /schemas/iio/adc/adc.yaml
+    type: object
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 4
+        description: The channel number.
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@2a {
+        compatible = "tyhx,hx9023s";
+        reg = <0x2a>;
+        interrupt-parent = <&pio>;
+        interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+        vdd-supply = <&pp1800_prox>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0>;
+          single-channel = <0>;
+        };
+        channel@1 {
+          reg = <1>;
+          single-channel = <1>;
+        };
+        channel@2 {
+          reg = <2>;
+          single-channel = <2>;
+        };
+        channel@3 {
+          reg = <3>;
+          diff-channels = <1 0>;
+        };
+        channel@4 {
+          reg = <4>;
+          diff-channels = <2 0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml
new file mode 100644
index 000000000000..8980b3cd8337
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s1210.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/resolver/adi,ad2s1210.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2S1210 Resolver-to-Digital Converter
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The AD2S1210 is a complete 10-bit to 16-bit resolution tracking
+  resolver-to-digital converter, integrating an on-board programmable
+  sinusoidal oscillator that provides sine wave excitation for
+  resolvers.
+
+  The AD2S1210 allows the user to read the angular position or the
+  angular velocity data directly from the parallel outputs or through
+  the serial interface.
+
+  The mode of operation of the communication channel (parallel or serial) is
+  selected by the A0 and A1 input pins. In normal mode, data is latched by
+  toggling the SAMPLE line and can then be read directly. In configuration mode,
+  data is read or written using a register access scheme (address byte with
+  read/write flag and data byte).
+
+    A1  A0  Result
+     0   0  Normal mode - position output
+     0   1  Normal mode - velocity output
+     1   0  Reserved
+     1   1  Configuration mode
+
+  In normal mode, the resolution of the digital output is selected using
+  the RES0 and RES1 input pins. In configuration mode, the resolution is
+  selected by setting the RES0 and RES1 bits in the control register.
+
+  RES1  RES0  Resolution (Bits)
+     0     0  10
+     0     1  12
+     1     0  14
+     1     1  16
+
+  Note on SPI connections: The CS line on the AD2S1210 should hard-wired to
+  logic low and the WR/FSYNC line on the AD2S1210 should be connected to the
+  SPI CSn output of the SPI controller.
+
+  Datasheet:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf
+
+properties:
+  compatible:
+    const: adi,ad2s1210
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 25000000
+
+  spi-cpha: true
+
+  avdd-supply:
+    description:
+      A 4.75 to 5.25 V regulator that powers the Analog Supply Voltage (AVDD)
+      pin.
+
+  dvdd-supply:
+    description:
+      A 4.75 to 5.25 V regulator that powers the Digital Supply Voltage (DVDD)
+      pin.
+
+  vdrive-supply:
+    description:
+      A 2.3 to 5.25 V regulator that powers the Logic Power Supply Input
+      (VDrive) pin.
+
+  clocks:
+    maxItems: 1
+    description: External oscillator clock (CLKIN).
+
+  reset-gpios:
+    description:
+      GPIO connected to the /RESET pin. As the line needs to be low for the
+      reset to be active, it should be configured as GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  sample-gpios:
+    description:
+      GPIO connected to the /SAMPLE pin. As the line needs to be low to trigger
+      a sample, it should be configured as GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  mode-gpios:
+    description:
+      GPIO lines connected to the A0 and A1 pins. These pins select the data
+      transfer mode.
+    minItems: 2
+    maxItems: 2
+
+  resolution-gpios:
+    description:
+      GPIO lines connected to the RES0 and RES1 pins. These pins select the
+      resolution of the digital output. If omitted, it is assumed that the
+      RES0 and RES1 pins are hard-wired to match the assigned-resolution-bits
+      property.
+    minItems: 2
+    maxItems: 2
+
+  fault-gpios:
+    description:
+      GPIO lines connected to the LOT and DOS pins. These pins combined indicate
+      the type of fault present, if any. As these pins a pulled low to indicate
+      a fault condition, they should be configured as GPIO_ACTIVE_LOW.
+    minItems: 2
+    maxItems: 2
+
+  adi,fixed-mode:
+    description:
+      This is used to indicate the selected mode if A0 and A1 are hard-wired
+      instead of connected to GPIOS (i.e. mode-gpios is omitted).
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [config, velocity, position]
+
+  assigned-resolution-bits:
+    description:
+      Resolution of the digital output required by the application. This
+      determines the precision of the angle and/or the maximum speed that can
+      be measured. If resolution-gpios is omitted, it is assumed that RES0 and
+      RES1 are hard-wired to match this value.
+    enum: [10, 12, 14, 16]
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - avdd-supply
+  - dvdd-supply
+  - vdrive-supply
+  - clocks
+  - sample-gpios
+  - assigned-resolution-bits
+
+oneOf:
+  - required:
+      - mode-gpios
+  - required:
+      - adi,fixed-mode
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        resolver@0 {
+            compatible = "adi,ad2s1210";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            spi-cpha;
+            avdd-supply = <&avdd_regulator>;
+            dvdd-supply = <&dvdd_regulator>;
+            vdrive-supply = <&vdrive_regulator>;
+            clocks = <&ext_osc>;
+            sample-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>;
+            mode-gpios = <&gpio0 86 0>, <&gpio0 87 0>;
+            resolution-gpios = <&gpio0 88 0>, <&gpio0 89 0>;
+            assigned-resolution-bits = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml
index 81e4bdfc17c4..b24e5a202a48 100644
--- a/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml
+++ b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml
@@ -33,8 +33,6 @@ properties:
 
   spi-cpha: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -43,6 +41,11 @@ dependencies:
   spi-cpol: [ spi-cpha ]
   spi-cpha: [ spi-cpol ]
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
index a88b3b14d6bd..dd2ae2bd1ad7 100644
--- a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
+++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
@@ -40,10 +40,6 @@ properties:
     description:
       Reset the sensorhub.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -52,6 +48,11 @@ required:
   - mcu-ap-gpios
   - mcu-reset-gpios
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
index 71de5631ebae..e955eb8e8797 100644
--- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@@ -11,9 +11,6 @@ description: The STMicroelectronics sensor devices are pretty straight-forward
   what type of sensor it is.
   Note that whilst this covers many STMicro MEMs sensors, some more complex
   IMUs need their own bindings.
-  The STMicroelectronics sensor devices are pretty straight-forward I2C or
-  SPI devices, all sharing the same device tree descriptions no matter what
-  type of sensor it is.
 
 maintainers:
   - Denis Ciocca <denis.ciocca@st.com>
@@ -29,6 +26,8 @@ properties:
           - st,lis2dw12
           - st,lis2hh12
           - st,lis2dh12-accel
+          - st,lis2ds12
+          - st,lis302dl
           - st,lis331dl-accel
           - st,lis331dlh-accel
           - st,lis3de
@@ -38,6 +37,7 @@ properties:
           - st,lis3lv02dl-accel
           - st,lng2dm-accel
           - st,lsm303agr-accel
+          - st,lsm303c-accel
           - st,lsm303dl-accel
           - st,lsm303dlh-accel
           - st,lsm303dlhc-accel
@@ -46,6 +46,12 @@ properties:
           - st,lsm330d-accel
           - st,lsm330dl-accel
           - st,lsm330dlc-accel
+      - items:
+          - const: st,iis328dq
+          - const: st,h3lis331dl-accel
+      - description: Silan Accelerometers
+        enum:
+          - silan,sc7a20
       - description: STMicroelectronics Gyroscopes
         enum:
           - st,l3g4200d-gyro
@@ -59,9 +65,11 @@ properties:
           - st,lsm9ds0-gyro
       - description: STMicroelectronics Magnetometers
         enum:
+          - st,iis2mdc
           - st,lis2mdl
           - st,lis3mdl-magn
           - st,lsm303agr-magn
+          - st,lsm303c-magn
           - st,lsm303dlh-magn
           - st,lsm303dlhc-magn
           - st,lsm303dlm-magn
@@ -69,6 +77,7 @@ properties:
       - description: STMicroelectronics Pressure Sensors
         enum:
           - st,lps001wp-press
+          - st,lps22df
           - st,lps22hb-press
           - st,lps22hh
           - st,lps25h-press
@@ -77,6 +86,7 @@ properties:
           - st,lps35hw
       - description: IMUs
         enum:
+          - st,lsm303d-imu
           - st,lsm9ds0-imu
       - description: Deprecated bindings
         enum:
@@ -89,7 +99,7 @@ properties:
 
   interrupts:
     description: interrupt line(s) connected to the DRDY line(s) and/or the
-      Intertial interrupt lines INT1 and INT2 if these exist. This means up to
+      Inertial interrupt lines INT1 and INT2 if these exist. This means up to
       three interrupts, and the DRDY must be the first one if it exists on
       the package. The trigger edge of the interrupts is sometimes software
       configurable in the hardware so the operating system should parse this
@@ -137,6 +147,7 @@ allOf:
             - st,lis2mdl
             - st,lis3l02dq
             - st,lis3lv02dl-accel
+            - st,lps22df
             - st,lps22hb-press
             - st,lps22hh
             - st,lps25h-press
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index 0f79d9a01c49..a22725f7619b 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -4,19 +4,51 @@
 $id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices LTC2983 Multi-sensor Temperature system
+title: Analog Devices LTC2983, LTC2986, LTM2985 Multi-sensor Temperature system
 
 maintainers:
   - Nuno Sá <nuno.sa@analog.com>
 
 description: |
-  Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System
+  Analog Devices LTC2983, LTC2984, LTC2986, LTM2985 Multi-Sensor Digital
+  Temperature Measurement Systems
+
   https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2984fb.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf
+
+$defs:
+  sensor-node:
+    type: object
+    description: Sensor node common constraints
+
+    properties:
+      reg:
+        description:
+          Channel number. Connects the sensor to the channel with this number
+          of the device.
+        minimum: 1
+        maximum: 20
+
+      adi,sensor-type:
+        description: Type of sensor connected to the device.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - reg
+      - adi,sensor-type
 
 properties:
   compatible:
-    enum:
-      - adi,ltc2983
+    oneOf:
+      - enum:
+          - adi,ltc2983
+          - adi,ltc2986
+          - adi,ltm2985
+      - items:
+          - const: adi,ltc2984
+          - const: adi,ltc2983
 
   reg:
     maxItems: 1
@@ -24,27 +56,29 @@ properties:
   interrupts:
     maxItems: 1
 
+  vdd-supply: true
+
   adi,mux-delay-config-us:
-    description:
-      The LTC2983 performs 2 or 3 internal conversion cycles per temperature
-      result. Each conversion cycle is performed with different excitation and
-      input multiplexer configurations. Prior to each conversion, these
-      excitation circuits and input switch configurations are changed and an
-      internal 1ms delay ensures settling prior to the conversion cycle in most
-      cases. An extra delay can be configured using this property. The value is
-      rounded to nearest 100us.
+    description: |
+      Extra delay prior to each conversion, in addition to the internal 1ms
+      delay, for the multiplexer to switch input configurations and
+      excitation values.
+
+      This property is supposed to be in microseconds, but to maintain
+      compatibility, this value will be multiplied by 100 before usage.
     maximum: 255
+    default: 0
 
   adi,filter-notch-freq:
     description:
-      Set's the default setting of the digital filter. The default is
-      simultaneous 50/60Hz rejection.
+      Notch frequency of the digital filter.
       0 - 50/60Hz rejection
       1 - 60Hz rejection
       2 - 50Hz rejection
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 2
+    default: 0
 
   '#address-cells':
     const: 1
@@ -53,30 +87,11 @@ properties:
     const: 0
 
 patternProperties:
-  "@([1-9]|1[0-9]|20)$":
-    type: object
-
-    properties:
-      reg:
-        description:
-          The channel number. It can be connected to one of the 20 channels of
-          the device.
-        minimum: 1
-        maximum: 20
-
-      adi,sensor-type:
-        description: Identifies the type of sensor connected to the device.
-        $ref: /schemas/types.yaml#/definitions/uint32
-
-    required:
-      - reg
-      - adi,sensor-type
+  '^thermocouple@':
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
 
-  "^thermocouple@":
-    type: object
-    description:
-      Represents a thermocouple sensor which is connected to one of the device
-      channels.
+    description: Thermocouple sensor.
 
     properties:
       adi,sensor-type:
@@ -95,86 +110,90 @@ patternProperties:
         maximum: 9
 
       adi,single-ended:
-        description:
-          Boolean property which set's the thermocouple as single-ended.
+        description: Whether the sensor is single-ended.
         type: boolean
 
       adi,sensor-oc-current-microamp:
-        description:
-          This property set's the pulsed current value applied during
-          open-circuit detect.
+        description: Pulsed current value applied during open-circuit detect.
         enum: [10, 100, 500, 1000]
+        default: 10
 
       adi,cold-junction-handle:
         description:
-          Phandle which points to a sensor object responsible for measuring
-          the thermocouple cold junction temperature.
-        $ref: "/schemas/types.yaml#/definitions/phandle"
+          Sensor responsible for measuring the thermocouple cold junction
+          temperature.
+        $ref: /schemas/types.yaml#/definitions/phandle
 
       adi,custom-thermocouple:
         description:
-          This is a table, where each entry should be a pair of
-          voltage(mv)-temperature(K). The entries must be given in nv and uK
-          so that, the original values must be multiplied by 1000000. For
-          more details look at table 69 and 70.
-          Note should be signed, but dtc doesn't currently maintain the
-          sign.
-        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+          Used for digitizing custom thermocouples.
+          See Page 59 of the datasheet.
+        $ref: /schemas/types.yaml#/definitions/int64-matrix
         minItems: 3
         maxItems: 64
         items:
-          minItems: 2
-          maxItems: 2
+          items:
+            - description: Voltage point in nV, signed.
+            - description: Temperature point in uK.
 
-  "^diode@":
-    type: object
-    description:
-      Represents a diode sensor which is connected to one of the device
-      channels.
+    allOf:
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 9
+        then:
+          required:
+            - adi,custom-thermocouple
+
+  '^diode@':
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+
+    description: Diode sensor.
 
     properties:
       adi,sensor-type:
-        description: Identifies the sensor as a diode.
+        description: Sensor type for diodes.
         $ref: /schemas/types.yaml#/definitions/uint32
         const: 28
 
       adi,single-ended:
-        description: Boolean property which set's the diode as single-ended.
+        description: Whether the sensor is single-ended.
         type: boolean
 
       adi,three-conversion-cycles:
         description:
-          Boolean property which set's three conversion cycles removing
-          parasitic resistance effects between the LTC2983 and the diode.
+          Whether to use three conversion cycles to remove parasitic
+          resistance between the device and the diode.
         type: boolean
 
       adi,average-on:
         description:
-          Boolean property which enables a running average of the diode
-          temperature reading. This reduces the noise when the diode is used
-          as a cold junction temperature element on an isothermal block
-          where temperatures change slowly.
+          Whether to use a running average of the diode temperature
+          reading to reduce the noise when the diode is used as a cold
+          junction temperature element on an isothermal block where
+          temperatures change slowly.
         type: boolean
 
       adi,excitation-current-microamp:
         description:
-          This property controls the magnitude of the excitation current
-          applied to the diode. Depending on the number of conversions
-          cycles, this property will assume different predefined values on
-          each cycle. Just set the value of the first cycle (1l).
+          Magnitude of the 1l excitation current applied to the diode.
+          4l excitation current will be 4 times this value, and 8l
+          excitation current will be 8 times value.
         enum: [10, 20, 40, 80]
+        default: 10
 
       adi,ideal-factor-value:
         description:
-          This property sets the diode ideality factor. The real value must
-          be multiplied by 1000000 to remove the fractional part. For more
-          information look at table 20 of the datasheet.
+          Diode ideality factor.
+          Set this property to 1000000 times the real value.
         $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0
 
-  "^rtd@":
-    type: object
-    description:
-      Represents a rtd sensor which is connected to one of the device channels.
+  '^rtd@':
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: RTD sensor.
 
     properties:
       reg:
@@ -197,68 +216,83 @@ patternProperties:
         maximum: 18
 
       adi,rsense-handle:
-        description:
-          Phandle pointing to a rsense object associated with this RTD.
-        $ref: "/schemas/types.yaml#/definitions/phandle"
+        description: Associated sense resistor sensor.
+        $ref: /schemas/types.yaml#/definitions/phandle
 
       adi,number-of-wires:
         description:
-          Identifies the number of wires used by the RTD. Setting this
-          property to 5 means 4 wires with Kelvin Rsense.
+          Number of wires used by the RTD.
+          5 means 4 wires with Kelvin sense resistor.
         $ref: /schemas/types.yaml#/definitions/uint32
         enum: [2, 3, 4, 5]
+        default: 2
 
       adi,rsense-share:
         description:
-          Boolean property which enables Rsense sharing, where one sense
-          resistor is used for multiple 2-, 3-, and/or 4-wire RTDs.
-        type: boolean
-
-      adi,current-rotate:
-        description:
-          Boolean property which enables excitation current rotation to
-          automatically remove parasitic thermocouple effects. Note that
-          this property is not allowed for 2- and 3-wire RTDs.
+          Whether to enable sense resistor sharing, where one sense
+          resistor is used by multiple sensors.
         type: boolean
 
       adi,excitation-current-microamp:
-        description:
-          This property controls the magnitude of the excitation current
-          applied to the RTD.
+        description: Excitation current applied to the RTD.
         enum: [5, 10, 25, 50, 100, 250, 500, 1000]
+        default: 5
 
       adi,rtd-curve:
-        description:
-          This property set the RTD curve used and the corresponding
-          Callendar-VanDusen constants. Look at table 30 of the datasheet.
+        description: |
+          RTD curve and the corresponding Callendar-VanDusen constants.
+          0 - European
+          1 - American
+          2 - Japanese
+          3 - ITS-90
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3
+        default: 0
 
       adi,custom-rtd:
         description:
-          This is a table, where each entry should be a pair of
-          resistance(ohm)-temperature(K). The entries added here are in uohm
-          and uK. For more details values look at table 74 and 75.
+          Used for digitizing custom RTDs.
+          See Page 62 of the datasheet.
         $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
         items:
-          minItems: 3
-          maxItems: 64
           items:
-            minItems: 2
-            maxItems: 2
+            - description: Resistance point in uOhms.
+            - description: Temperature point in uK.
 
     required:
       - adi,rsense-handle
 
-    dependencies:
-      adi,current-rotate: [ "adi,rsense-share" ]
-
-  "^thermistor@":
-    type: object
-    description:
-      Represents a thermistor sensor which is connected to one of the device
-      channels.
+    allOf:
+      - if:
+          properties:
+            adi,number-of-wires:
+              const: 4
+        then:
+          properties:
+            adi,current-rotate:
+              description:
+                Whether to enable excitation current rotation to automatically
+                remove parasitic thermocouple effects.
+              type: boolean
+
+          dependencies:
+            adi,current-rotate: [ 'adi,rsense-share' ]
+
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 18
+        then:
+          required:
+            - adi,custom-rtd
+
+  '^thermistor@':
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Thermistor sensor.
 
     properties:
       adi,sensor-type:
@@ -277,87 +311,135 @@ patternProperties:
         maximum: 27
 
       adi,rsense-handle:
-        description:
-          Phandle pointing to a rsense object associated with this
-          thermistor.
-        $ref: "/schemas/types.yaml#/definitions/phandle"
+        description: Associated sense resistor sensor.
+        $ref: /schemas/types.yaml#/definitions/phandle
 
       adi,single-ended:
-        description:
-          Boolean property which set's the thermistor as single-ended.
+        description: Whether the sensor is single-ended.
         type: boolean
 
       adi,rsense-share:
         description:
-          Boolean property which enables Rsense sharing, where one sense
-          resistor is used for multiple thermistors. Note that this property
-          is ignored if adi,single-ended is set.
+          Whether to enable sense resistor sharing, where one sense
+          resistor is used by multiple sensors.
         type: boolean
 
       adi,current-rotate:
         description:
-          Boolean property which enables excitation current rotation to
-          automatically remove parasitic thermocouple effects.
+          Whether to enable excitation current rotation to automatically
+          remove parasitic thermocouple effects.
         type: boolean
 
       adi,excitation-current-nanoamp:
         description:
-          This property controls the magnitude of the excitation current
-          applied to the thermistor. Value 0 set's the sensor in auto-range
-          mode.
-        $ref: /schemas/types.yaml#/definitions/uint32
+          Excitation current applied to the thermistor.
+          0 sets the sensor in auto-range mode.
         enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
                500000, 1000000]
+        default: 0
 
       adi,custom-thermistor:
         description:
-          This is a table, where each entry should be a pair of
-          resistance(ohm)-temperature(K). The entries added here are in uohm
-          and uK only for custom thermistors. For more details look at table
-          78 and 79.
+          Used for digitizing custom thermistors.
+          See Page 65 of the datasheet.
         $ref: /schemas/types.yaml#/definitions/uint64-matrix
         minItems: 3
         maxItems: 64
         items:
-          minItems: 2
-          maxItems: 2
+          items:
+            - description: Resistance point in uOhms.
+            - description: Temperature point in uK.
 
       adi,custom-steinhart:
         description:
-          Steinhart-Hart coefficients are also supported and can
-          be programmed into the device memory using this property. For
-          Steinhart sensors the coefficients are given in the raw
-          format. Look at table 82 for more information.
+          Steinhart-Hart coefficients in raw format, used for digitizing
+          custom thermistors.
+          See Page 68 of the datasheet.
         $ref: /schemas/types.yaml#/definitions/uint32-array
-        items:
-          minItems: 6
-          maxItems: 6
+        minItems: 6
+        maxItems: 6
 
     required:
       - adi,rsense-handle
 
     dependencies:
-      adi,current-rotate: [ "adi,rsense-share" ]
-
-  "^adc@":
-    type: object
-    description: Represents a channel which is being used as a direct adc.
+      adi,current-rotate: [ 'adi,rsense-share' ]
+
+    allOf:
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 26
+        then:
+          properties:
+            adi,excitation-current-nanoamp:
+              enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
+                     250000, 500000, 1000000]
+              default: 1000
+          required:
+            - adi,custom-steinhart
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 27
+        then:
+          properties:
+            adi,excitation-current-nanoamp:
+              enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
+                     250000, 500000, 1000000]
+              default: 1000
+          required:
+            - adi,custom-thermistor
+
+  '^adc@':
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Direct ADC sensor.
 
     properties:
       adi,sensor-type:
-        description: Identifies the sensor as a direct adc.
+        description: Sensor type for direct ADC sensors.
         $ref: /schemas/types.yaml#/definitions/uint32
         const: 30
 
       adi,single-ended:
-        description: Boolean property which set's the adc as single-ended.
+        description: Whether the sensor is single-ended.
         type: boolean
 
-  "^rsense@":
-    type: object
-    description:
-      Represents a rsense which is connected to one of the device channels.
-      Rsense are used by thermistors and RTD's.
+  '^temp@':
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Active analog temperature sensor.
+
+    properties:
+      adi,sensor-type:
+        description: Sensor type for active analog temperature sensors.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 31
+
+      adi,single-ended:
+        description: Whether the sensor is single-ended.
+        type: boolean
+
+      adi,custom-temp:
+        description:
+          Used for digitizing active analog temperature sensors.
+          See Page 67 of the LTM2985 datasheet.
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
+        items:
+          items:
+            - description: Voltage point in nV, signed.
+            - description: Temperature point in uK.
+
+    required:
+      - adi,custom-temp
+
+  '^rsense@':
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Sense resistor sensor.
 
     properties:
       reg:
@@ -365,14 +447,12 @@ patternProperties:
         maximum: 20
 
       adi,sensor-type:
-        description: Identifies the sensor as a rsense.
+        description: Sensor type sense resistor sensors.
         $ref: /schemas/types.yaml#/definitions/uint32
         const: 29
 
       adi,rsense-val-milli-ohms:
-        description:
-          Sets the value of the sense resistor. Look at table 20 of the
-          datasheet for information.
+        description: Value of the sense resistor.
 
     required:
       - adi,rsense-val-milli-ohms
@@ -381,9 +461,22 @@ required:
   - compatible
   - reg
   - interrupts
+  - vdd-supply
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ltc2983
+              - adi,ltc2984
+    then:
+      patternProperties:
+        '^temp@': false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -391,76 +484,76 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        sensor_ltc2983: ltc2983@0 {
-                compatible = "adi,ltc2983";
-                reg = <0>;
-
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-                interrupt-parent = <&gpio>;
-
-                thermocouple@18 {
-                        reg = <18>;
-                        adi,sensor-type = <8>; //Type B
-                        adi,sensor-oc-current-microamp = <10>;
-                        adi,cold-junction-handle = <&diode5>;
-                };
-
-                diode5: diode@5 {
-                        reg = <5>;
-                        adi,sensor-type = <28>;
-                };
-
-                rsense2: rsense@2 {
-                        reg = <2>;
-                        adi,sensor-type = <29>;
-                        adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
-                };
-
-                rtd@14 {
-                        reg = <14>;
-                        adi,sensor-type = <15>; //PT1000
-                        /*2-wire, internal gnd, no current rotation*/
-                        adi,number-of-wires = <2>;
-                        adi,rsense-share;
-                        adi,excitation-current-microamp = <500>;
-                        adi,rsense-handle = <&rsense2>;
-                };
-
-                adc@10 {
-                        reg = <10>;
-                        adi,sensor-type = <30>;
-                        adi,single-ended;
-                };
-
-                thermistor@12 {
-                        reg = <12>;
-                        adi,sensor-type = <26>; //Steinhart
-                        adi,rsense-handle = <&rsense2>;
-                        adi,custom-steinhart = <0x00F371EC 0x12345678
-                                        0x2C0F8733 0x10018C66 0xA0FEACCD
-                                        0x90021D99>; //6 entries
-                };
-
-                thermocouple@20 {
-                        reg = <20>;
-                        adi,sensor-type = <9>; //custom thermocouple
-                        adi,single-ended;
-                        adi,custom-thermocouple = /bits/ 64
-                                 <(-50220000) 0>,
-                                 <(-30200000) 99100000>,
-                                 <(-5300000) 135400000>,
-                                 <0 273150000>,
-                                 <40200000 361200000>,
-                                 <55300000 522100000>,
-                                 <88300000 720300000>,
-                                 <132200000 811200000>,
-                                 <188700000 922500000>,
-                                 <460400000 1000000000>; //10 pairs
-               };
-
+        temperature-sensor@0 {
+            compatible = "adi,ltc2983";
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            vdd-supply = <&supply>;
+            interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio>;
+
+            thermocouple@18 {
+                reg = <18>;
+                adi,sensor-type = <8>; //Type B
+                adi,sensor-oc-current-microamp = <10>;
+                adi,cold-junction-handle = <&diode5>;
+            };
+
+            diode5: diode@5 {
+                reg = <5>;
+                adi,sensor-type = <28>;
+            };
+
+            rsense2: rsense@2 {
+                reg = <2>;
+                adi,sensor-type = <29>;
+                adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
+            };
+
+            rtd@14 {
+                reg = <14>;
+                adi,sensor-type = <15>; //PT1000
+                /*2-wire, internal gnd, no current rotation*/
+                adi,number-of-wires = <2>;
+                adi,rsense-share;
+                adi,excitation-current-microamp = <500>;
+                adi,rsense-handle = <&rsense2>;
+            };
+
+            adc@10 {
+                reg = <10>;
+                adi,sensor-type = <30>;
+                adi,single-ended;
+            };
+
+            thermistor@12 {
+                reg = <12>;
+                adi,sensor-type = <26>; //Steinhart
+                adi,rsense-handle = <&rsense2>;
+                adi,custom-steinhart = <0x00f371ec 0x12345678
+                                0x2c0f8733 0x10018c66 0xa0feaccd
+                                0x90021d99>; //6 entries
+            };
+
+            thermocouple@20 {
+                reg = <20>;
+                adi,sensor-type = <9>; //custom thermocouple
+                adi,single-ended;
+                adi,custom-thermocouple =
+                         /bits/ 64 <(-50220000) 0>,
+                         /bits/ 64 <(-30200000) 99100000>,
+                         /bits/ 64 <(-5300000) 135400000>,
+                         /bits/ 64 <0 273150000>,
+                         /bits/ 64 <40200000 361200000>,
+                         /bits/ 64 <55300000 522100000>,
+                         /bits/ 64 <88300000 720300000>,
+                         /bits/ 64 <132200000 811200000>,
+                         /bits/ 64 <188700000 922500000>,
+                         /bits/ 64 <460400000 1000000000>; //10 pairs
+            };
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
index 9969bac66aa1..0805ed7e2113 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
@@ -32,7 +32,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
 
 required:
@@ -40,6 +39,7 @@ required:
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -53,7 +53,7 @@ allOf:
       properties:
         spi-cpha: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
index 873b34766676..228a94165487 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
@@ -19,7 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
 
   thermocouple-type:
@@ -34,7 +33,10 @@ required:
   - reg
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
index aafb33b16549..7c0c6ab6fc69 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -25,7 +25,6 @@ properties:
       enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection.
     type: boolean
 
-  spi-max-frequency: true
   spi-cpha: true
 
 required:
@@ -33,20 +32,23 @@ required:
   - reg
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     spi {
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       temp_sensor@0 {
-         compatible = "maxim,max31865";
-         reg = <0>;
-         spi-max-frequency = <400000>;
-         spi-cpha;
-         maxim,3-wire;
-       };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@0 {
+            compatible = "maxim,max31865";
+            reg = <0>;
+            spi-max-frequency = <400000>;
+            spi-cpha;
+            maxim,3-wire;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
index d6965a0c1cf3..654d31f65d36 100644
--- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90614.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90614.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Melexis MLX90614 contactless IR temperature sensor
+title: Melexis MLX90614/MLX90615 contactless IR temperature sensor
 
 maintainers:
   - Peter Meerwald <pmeerw@pmeerw.net>
@@ -15,7 +15,9 @@ description: |
 
 properties:
   compatible:
-    const: melexis,mlx90614
+    enum:
+      - melexis,mlx90614
+      - melexis,mlx90615
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
index b547ddcd544a..03bb5d4fa8b5 100644
--- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90632.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Melexis MLX90632 contactless Infra Red temperature sensor
+title: Melexis MLX90632 and MLX90635 contactless Infra Red temperature sensor
 
 maintainers:
   - Crt Mori <cmo@melexis.com>
@@ -27,14 +27,32 @@ description: |
   Since measured object emissivity effects Infra Red energy emitted,
   emissivity should be set before requesting the object temperature.
 
+  https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90635
+
+  MLX90635 is most suitable for consumer applications where
+  measured object temperature is in range between -20 to 100 degrees
+  Celsius with relative error of measurement 2 degree Celsius in
+  object temperature range for industrial applications, while just 0.2
+  degree Celsius for human body measurement applications. Since it can
+  operate and measure ambient temperature in range of -20 to 85 degrees
+  Celsius it is suitable also for outdoor use.
+
+  Since measured object emissivity effects Infra Red energy emitted,
+  emissivity should be set before requesting the object temperature.
+
 properties:
   compatible:
-    const: melexis,mlx90632
+    enum:
+      - melexis,mlx90632
+      - melexis,mlx90635
 
   reg:
     maxItems: 1
     description: Default is 0x3a, but can be reprogrammed.
 
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
 required:
   - compatible
   - reg
@@ -50,6 +68,7 @@ examples:
         temp-sensor@3a {
             compatible = "melexis,mlx90632";
             reg = <0x3a>;
+            vdd-supply = <&ldo4_reg>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml b/Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml
new file mode 100644
index 000000000000..effe3bee495d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/microchip,mcp9600.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/microchip,mcp9600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP9600 and similar thermocouple EMF converters
+
+maintainers:
+  - Andrew Hepp <andrew.hepp@ahepp.dev>
+
+description:
+  https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - const: microchip,mcp9600
+      - items:
+          - const: microchip,mcp9601
+          - const: microchip,mcp9600
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 6
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 6
+    items:
+      enum:
+        - open-circuit
+        - short-circuit
+        - alert1
+        - alert2
+        - alert3
+        - alert4
+
+  thermocouple-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 3
+    description:
+      Type of thermocouple (THERMOCOUPLE_TYPE_K if omitted).
+      Use defines in dt-bindings/iio/temperature/thermocouple.h.
+      Supported types are B, E, J, K, N, R, S, T.
+
+  microchip,vsense:
+    type: boolean
+    description:
+      This flag indicates that the chip has been wired with VSENSE to
+      enable open and short circuit detect.
+
+  vdd-supply: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: microchip,mcp9601
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 4
+        interrupt-names:
+          minItems: 1
+          maxItems: 4
+          items:
+            enum:
+              - alert1
+              - alert2
+              - alert3
+              - alert4
+        microchip,vsense: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/iio/temperature/thermocouple.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@60 {
+            compatible = "microchip,mcp9600";
+            reg = <0x60>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "alert1";
+            thermocouple-type = <THERMOCOUPLE_TYPE_K>;
+            vdd-supply = <&vdd>;
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@62 {
+            compatible = "microchip,mcp9601", "microchip,mcp9600";
+            reg = <0x62>;
+            interrupt-parent = <&gpio>;
+            interrupts = <22 IRQ_TYPE_EDGE_RISING>, <23 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "open-circuit", "short-circuit";
+            vdd-supply = <&vdd>;
+            microchip,vsense;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
new file mode 100644
index 000000000000..590f50ba3a31
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp006.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/ti,tmp006.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TMP006 IR thermopile sensor
+
+maintainers:
+  - Peter Meerwald <pmeerw@pmeerw.net>
+
+description: |
+  TI TMP006 - Infrared Thermopile Sensor in Chip-Scale Package.
+  https://cdn.sparkfun.com/datasheets/Sensors/Temp/tmp006.pdf
+
+properties:
+  compatible:
+    const: ti,tmp006
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        temperature-sensor@40 {
+            compatible = "ti,tmp006";
+            reg = <0x40>;
+            vdd-supply = <&ldo4_reg>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
index 347bc16a4671..fbba5e934861 100644
--- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
@@ -1,15 +1,16 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: "TI TMP117 - Digital temperature sensor with integrated NV memory"
+title: TI TMP117 - Digital temperature sensor with integrated NV memory
 
 description: |
-    TI TMP117 - Digital temperature sensor with integrated NV memory that supports
-    I2C interface.
-      https://www.ti.com/lit/gpn/tmp1
+    TI TMP116/117 - Digital temperature sensor with integrated NV memory that
+    supports I2C interface.
+      https://www.ti.com/lit/gpn/tmp116
+      https://www.ti.com/lit/gpn/tmp117
 
 maintainers:
   - Puranjay Mohan <puranjay12@gmail.com>
@@ -17,14 +18,22 @@ maintainers:
 properties:
   compatible:
     enum:
+      - ti,tmp116
       - ti,tmp117
 
   reg:
     maxItems: 1
 
+  vcc-supply:
+    description: provide VCC power to the sensor.
+
+  label:
+    description: Unique name to identify which device this is.
+
 required:
   - compatible
   - reg
+  - vcc-supply
 
 additionalProperties: false
 
@@ -35,7 +44,8 @@ examples:
         #size-cells = <0>;
 
         tmp117@48 {
-             compatible = "ti,tmp117";
-             reg = <0x48>;
+            compatible = "ti,tmp117";
+            reg = <0x48>;
+            vcc-supply = <&pmic_reg_3v3>;
         };
     };
diff --git a/Documentation/devicetree/bindings/incomplete-devices.yaml b/Documentation/devicetree/bindings/incomplete-devices.yaml
new file mode 100644
index 000000000000..4bb6c0141e9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/incomplete-devices.yaml
@@ -0,0 +1,285 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/incomplete-devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rejected, Legacy or Incomplete Devices
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  Some devices will not or should not get a proper Devicetree bindings, but
+  their compatibles are present in Linux drivers for various reasons.
+
+  Examples are devices using ACPI PRP0001 with non-updatable firmware/ACPI
+  tables or old PowerPC platforms without in-tree DTS.
+
+  Following list of devices is an incomplete schema with a goal to pass DT schema
+  checks on undocumented compatibles but also reject any DTS file using such
+  un-approved compatible.
+
+  Usage of any of following compatibles is not allowed in Devicetree sources,
+  even if they come from immutable firmware.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Rejected compatibles in Devicetree, but used in ACPI-based devices
+          with non-updatable firmware/ACPI tables (via ACPI PRP0001)
+        enum:
+          - broadcom,bcm5241
+          - ltr,ltrf216a
+
+      - description: Legacy compatibles used on Macintosh devices
+        enum:
+          - AAPL,3500
+          - AAPL,7500
+          - AAPL,8500
+          - AAPL,9500
+          - AAPL,accelerometer_1
+          - AAPL,e411
+          - AAPL,Gossamer
+          - AAPL,PowerBook1998
+          - AAPL,ShinerESB
+          - adm1030
+          - amd-0137
+          - B5221
+          - bmac+
+          - burgundy
+          - cobalt
+          - cy28508
+          - daca
+          - fcu
+          - gatwick
+          - gmac
+          - heathrow
+          - heathrow-ata
+          - heathrow-media-bay
+          - i2sbus
+          - i2s-modem
+          - iMac
+          - K2-GMAC
+          - k2-i2c
+          - K2-Keylargo
+          - K2-UATA
+          - kauai-ata
+          - Keylargo
+          - keylargo-ata
+          - keylargo-media-bay
+          - lm87cimt
+          - MAC,adm1030
+          - MAC,ds1775
+          - MacRISC
+          - MacRISC2
+          - MacRISC3
+          - MacRISC4
+          - max6690
+          - ohare
+          - ohare-media-bay
+          - ohare-swim3
+          - PowerBook1,1
+          - PowerBook2,1
+          - PowerBook2,2
+          - PowerBook3,1
+          - PowerBook3,2
+          - PowerBook3,3
+          - PowerBook3,4
+          - PowerBook3,5
+          - PowerBook4,1
+          - PowerBook4,2
+          - PowerBook4,3
+          - PowerBook5,1
+          - PowerBook5,2
+          - PowerBook5,3
+          - PowerBook5,4
+          - PowerBook5,5
+          - PowerBook5,6
+          - PowerBook5,7
+          - PowerBook5,8
+          - PowerBook5,9
+          - PowerBook6,3
+          - PowerBook6,5
+          - PowerBook6,7
+          - PowerMac10,1
+          - PowerMac10,2
+          - PowerMac1,1
+          - PowerMac11,2
+          - PowerMac12,1
+          - PowerMac2,1
+          - PowerMac2,2
+          - PowerMac3,1
+          - PowerMac3,4
+          - PowerMac3,5
+          - PowerMac3,6
+          - PowerMac4,1
+          - PowerMac4,2
+          - PowerMac4,4
+          - PowerMac4,5
+          - PowerMac7,2
+          - PowerMac7,3
+          - PowerMac8,1
+          - PowerMac8,2
+          - PowerMac9,1
+          - paddington
+          - RackMac1,1
+          - RackMac1,2
+          - RackMac3,1
+          - screamer
+          - shasta-ata
+          - sms
+          - smu-rpm-fans
+          - smu-sat
+          - smu-sensors
+          - snapper
+          - swim3
+          - tumbler
+          - u3-agp
+          - u3-dart
+          - u3-ht
+          - u4-dart
+          - u4-pcie
+          - U4-pcie
+          - uni-n-i2c
+          - uni-north
+
+      - description: Legacy compatibles used on other PowerPC devices
+        enum:
+          - 1682m-gizmo
+          - 1682m-gpio
+          - 1682m-rng
+          - 1682m-sdc
+          - amcc,ppc440epx-rng
+          - amcc,ppc460ex-bcsr
+          - amcc,ppc460ex-crypto
+          - amcc,ppc460ex-rng
+          - amcc,ppc460sx-crypto
+          - amcc,ppc4xx-crypto
+          - amcc,sata-460ex
+          - CBEA,platform-open-pic
+          - CBEA,platform-spider-pic
+          - direct-mapped
+          - display
+          - gpio-mdio
+          - hawk-bridge
+          - hawk-pci
+          - IBM,CBEA
+          - IBM,lhca
+          - IBM,lhea
+          - IBM,lhea-ethernet
+          - ibm,axon-msic
+          - Momentum,Apache
+          - Momentum,Maple
+          - mai-logic,articia-s
+          - mpc10x-pci
+          - mpc5200b-fec-phy
+          - mpc5200-serial
+          - mpc5200-sram
+          - nintendo,flipper
+          - nintendo,flipper-exi
+          - nintendo,flipper-pi
+          - nintendo,flipper-pic
+          - nintendo,hollywood
+          - nintendo,hollywood-pic
+          - nintendo,latte-exi
+          - nintendo,latte-srnprot
+          - ohci-be
+          - ohci-bigendian
+          - ohci-le
+          - PA6T-1682M
+          - pasemi,1682m-iob
+          - pasemi,localbus
+          - pasemi,localbus-nand
+          - pasemi,nemo
+          - pasemi,pwrficient
+          - pasemi,pwrficient-rng
+          - pasemi,rootbus
+          - pasemi,sdc
+          - soc
+          - sony,ps3
+          - sti,platform-spider-pic
+
+      - description: Legacy compatibles used on SPARC devices
+        enum:
+          - bq4802
+          - ds1287
+          - i2cpcf,8584
+          - isa-m5819p
+          - isa-m5823p
+          - m5819
+          - qcn
+          - sab82532
+          - su
+          - sun4v
+          - SUNW,bbc-beep
+          - SUNW,bbc-i2c
+          - SUNW,CS4231
+          - SUNW,ebus-pic16f747-env
+          - SUNW,kt-cwq
+          - SUNW,kt-mau
+          - SUNW,n2-cwq
+          - SUNW,n2-mau
+          - SUNW,niusl
+          - SUNW,smbus-beep
+          - SUNW,sun4v-console
+          - SUNW,sun4v-pci
+          - SUNW,vf-cwq
+          - SUNW,vf-mau
+
+      - description: Incomplete and/or legacy compatibles for unknown devices
+        enum:
+          - electra-cf
+          - i2cpcf,8584
+          - virtio,uml
+
+      - description: Linux kernel unit tests and sample code
+        enum:
+          - audio-graph-card2-custom-sample
+          - compat1
+          - compat2
+          - compat3
+          - gpio-mockup
+          - gpio-simulator
+          - gpio-virtuser
+          - linux,spi-loopback-test
+          - mailbox-test
+          - regulator-virtual-consumer
+          - test-device
+
+      - description:
+          Devices on MIPS platform, without any DTS users.  These are
+          unlikely to get converted to DT schema.
+        enum:
+          - mti,ranchu
+
+      - description:
+          Devices on PowerPC platform, without any DTS users.  These are
+          unlikely to get converted to DT schema.
+        enum:
+          - fujitsu,coral
+          - fujitsu,lime
+          - fujitsu,MB86276
+          - fujitsu,MB86277
+          - fujitsu,MB86293
+          - fujitsu,MB86294
+          - fujitsu,mint
+          - ibm,axon-msic
+          - ibm,pmemory
+          - ibm,pmemory-v2
+          - ibm,power-rng
+          - ibm,ppc4xx-spi
+          - ibm,sdram-4xx-ddr2
+          - ibm,secureboot
+          - ibm,secureboot-v1
+          - ibm,secureboot-v2
+          - ibm,secvar-backend
+          - sgy,gpio-halt
+          - wrs,epld-localbus
+
+required:
+  - compatible
+  - broken-usage-of-incorrect-compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/index.rst b/Documentation/devicetree/bindings/index.rst
index d9002a3a0abb..cc1fbdc05657 100644
--- a/Documentation/devicetree/bindings/index.rst
+++ b/Documentation/devicetree/bindings/index.rst
@@ -4,6 +4,7 @@
    :maxdepth: 1
 
    ABI
+   dts-coding-style
    writing-bindings
    writing-schema
    submitting-patches
diff --git a/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml b/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml
new file mode 100644
index 000000000000..5e86f6de6978
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adafruit,seesaw-gamepad.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adafruit,seesaw-gamepad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Adafruit Mini I2C Gamepad with seesaw
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+description: |
+  Adafruit Mini I2C Gamepad
+
+    +-----------------------------+
+    |   ___                       |
+    |  /   \               (X)    |
+    | |  S  |  __   __  (Y)   (A) |
+    |  \___/  |ST| |SE|    (B)    |
+    |                             |
+    +-----------------------------+
+
+  S -> 10-bit precision bidirectional analog joystick
+  ST -> Start
+  SE -> Select
+  X, A, B, Y -> Digital action buttons
+
+  Datasheet: https://cdn-learn.adafruit.com/downloads/pdf/gamepad-qt.pdf
+  Product page: https://www.adafruit.com/product/5743
+  Arduino Driver: https://github.com/adafruit/Adafruit_Seesaw
+
+properties:
+  compatible:
+    const: adafruit,seesaw-gamepad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description:
+      The gamepad's IRQ pin triggers a rising edge if interrupts are enabled.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        joystick@50 {
+            compatible = "adafruit,seesaw-gamepad";
+            interrupts = <18 IRQ_TYPE_EDGE_RISING>;
+            reg = <0x50>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
index 721878d5b7af..6c244d66f8ce 100644
--- a/Documentation/devicetree/bindings/input/adc-joystick.yaml
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019-2020 Artur Rojek
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/input/adc-joystick.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ADC attached joystick
 
@@ -14,6 +14,9 @@ description: >
   Bindings for joystick devices connected to ADC controllers supporting
   the Industrial I/O subsystem.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: adc-joystick
@@ -28,6 +31,8 @@ properties:
       https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
       for details.
 
+  poll-interval: true
+
   '#address-cells':
     const: 1
 
@@ -45,6 +50,7 @@ additionalProperties: false
 patternProperties:
   "^axis@[0-9a-f]+$":
     type: object
+    $ref: input.yaml#
     description: >
       Represents a joystick axis bound to the given ADC channel.
       For each entry in the io-channels list, one axis subnode with a matching
@@ -57,15 +63,13 @@ patternProperties:
         description: Index of an io-channels list entry bound to this axis.
 
       linux,code:
-        $ref: /schemas/types.yaml#/definitions/uint32
         description: EV_ABS specific event code generated by the axis.
 
       abs-range:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              - description: minimum value
-              - description: maximum value
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimum value
+          - description: maximum value
         description: >
           Minimum and maximum values produced by the axis.
           For an ABS_X axis this will be the left-most and right-most
diff --git a/Documentation/devicetree/bindings/input/adc-keys.txt b/Documentation/devicetree/bindings/input/adc-keys.txt
deleted file mode 100644
index 6c8be6a9ace2..000000000000
--- a/Documentation/devicetree/bindings/input/adc-keys.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-ADC attached resistor ladder buttons
-------------------------------------
-
-Required properties:
- - compatible: "adc-keys"
- - io-channels: Phandle to an ADC channel
- - io-channel-names = "buttons";
- - keyup-threshold-microvolt: Voltage above or equal to which all the keys are
-			      considered up.
-
-Optional properties:
-	- poll-interval: Poll interval time in milliseconds
-	- autorepeat: Boolean, Enable auto repeat feature of Linux input
-	  subsystem.
-
-Each button (key) is represented as a sub-node of "adc-keys":
-
-Required subnode-properties:
-	- label: Descriptive name of the key.
-	- linux,code: Keycode to emit.
-	- press-threshold-microvolt: voltage above or equal to which this key is
-				     considered pressed.
-
-No two values of press-threshold-microvolt may be the same.
-All values of press-threshold-microvolt must be less than
-keyup-threshold-microvolt.
-
-Example:
-
-#include <dt-bindings/input/input.h>
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&lradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <2000000>;
-
-		button-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			press-threshold-microvolt = <1500000>;
-		};
-
-		button-down {
-			label = "Volume Down";
-			linux,code = <KEY_VOLUMEDOWN>;
-			press-threshold-microvolt = <1000000>;
-		};
-
-		button-enter {
-			label = "Enter";
-			linux,code = <KEY_ENTER>;
-			press-threshold-microvolt = <500000>;
-		};
-	};
-
-+--------------------------------+------------------------+
-| 2.000.000 <= value             | no key pressed         |
-+--------------------------------+------------------------+
-| 1.500.000 <= value < 2.000.000 | KEY_VOLUMEUP pressed   |
-+--------------------------------+------------------------+
-| 1.000.000 <= value < 1.500.000 | KEY_VOLUMEDOWN pressed |
-+--------------------------------+------------------------+
-|   500.000 <= value < 1.000.000 | KEY_ENTER pressed      |
-+--------------------------------+------------------------+
-|              value <   500.000 | no key pressed         |
-+--------------------------------+------------------------+
diff --git a/Documentation/devicetree/bindings/input/adc-keys.yaml b/Documentation/devicetree/bindings/input/adc-keys.yaml
new file mode 100644
index 000000000000..7aa078dead37
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-keys.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adc-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC attached resistor ladder buttons
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: adc-keys
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: buttons
+
+  keyup-threshold-microvolt:
+    description:
+      Voltage above or equal to which all the keys are considered up.
+
+  poll-interval: true
+  autorepeat: true
+
+patternProperties:
+  '^button-':
+    type: object
+    $ref: input.yaml#
+    additionalProperties: false
+    description:
+      Each button (key) is represented as a sub-node.
+
+    properties:
+      label: true
+
+      linux,code: true
+
+      press-threshold-microvolt:
+        description:
+          Voltage above or equal to which this key is considered pressed. No
+          two values of press-threshold-microvolt may be the same. All values
+          of press-threshold-microvolt must be less than
+          keyup-threshold-microvolt.
+
+    required:
+      - linux,code
+      - press-threshold-microvolt
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - keyup-threshold-microvolt
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    // +--------------------------------+------------------------+
+    // | 2.000.000 <= value             | no key pressed         |
+    // +--------------------------------+------------------------+
+    // | 1.500.000 <= value < 2.000.000 | KEY_VOLUMEUP pressed   |
+    // +--------------------------------+------------------------+
+    // | 1.000.000 <= value < 1.500.000 | KEY_VOLUMEDOWN pressed |
+    // +--------------------------------+------------------------+
+    // |   500.000 <= value < 1.000.000 | KEY_ENTER pressed      |
+    // +--------------------------------+------------------------+
+    // |              value <   500.000 | no key pressed         |
+    // +--------------------------------+------------------------+
+
+    adc-keys {
+        compatible = "adc-keys";
+        io-channels = <&lradc 0>;
+        io-channel-names = "buttons";
+        keyup-threshold-microvolt = <2000000>;
+
+        button-up {
+            label = "Volume Up";
+            linux,code = <KEY_VOLUMEUP>;
+            press-threshold-microvolt = <1500000>;
+        };
+
+        button-down {
+            label = "Volume Down";
+            linux,code = <KEY_VOLUMEDOWN>;
+            press-threshold-microvolt = <1000000>;
+        };
+
+        button-enter {
+            label = "Enter";
+            linux,code = <KEY_ENTER>;
+            press-threshold-microvolt = <500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
new file mode 100644
index 000000000000..336bc352579a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adi,adp5588.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5588 Keypad Controller
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices Mobile I/O Expander and QWERTY Keypad Controller
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf
+
+allOf:
+  - $ref: matrix-keymap.yaml#
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adp5587
+      - adi,adp5588
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Supply Voltage Input
+
+  reset-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10. This property is optional if
+      keypad,num-rows or keypad,num-columns are not specified as the
+      device is then configured to be used purely for gpio during which
+      interrupts may or may not be utilized.
+
+  '#interrupt-cells':
+    const: 2
+
+  adi,unlock-keys:
+    description:
+      Specifies a maximum of 2 keys that can be used to unlock the keypad.
+      If this property is set, the keyboard will be locked and only unlocked
+      after these keys are pressed. If only one key is set, a double click is
+      needed to unlock the keypad. The value of this property cannot be bigger
+      or equal than keypad,num-rows * keypad,num-columns.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+
+dependencies:
+  keypad,num-rows:
+    - linux,keymap
+    - keypad,num-columns
+  keypad,num-columns:
+    - linux,keymap
+    - keypad,num-rows
+  linux,keymap:
+    - keypad,num-rows
+    - keypad,num-columns
+    - interrupts
+  interrupt-controller:
+    - interrupts
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        keys@34 {
+            compatible = "adi,adp5588";
+            reg = <0x34>;
+
+            vcc-supply = <&vcc>;
+            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+
+            keypad,num-rows = <1>;
+            keypad,num-columns = <9>;
+            linux,keymap = <
+                MATRIX_KEY(0x00, 0x00, KEY_1)
+                MATRIX_KEY(0x00, 0x01, KEY_2)
+                MATRIX_KEY(0x00, 0x02, KEY_3)
+                MATRIX_KEY(0x00, 0x03, KEY_4)
+                MATRIX_KEY(0x00, 0x04, KEY_5)
+                MATRIX_KEY(0x00, 0x05, KEY_6)
+                MATRIX_KEY(0x00, 0x06, KEY_7)
+                MATRIX_KEY(0x00, 0x07, KEY_8)
+                MATRIX_KEY(0x00, 0x08, KEY_9)
+            >;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpio@34 {
+            compatible = "adi,adp5588";
+            reg = <0x34>;
+
+            #gpio-cells = <2>;
+            gpio-controller;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index d74f2002409e..6bdb8040be65 100644
--- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/allwinner,sun4i-a10-lradc-keys.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 LRADC Device Tree Bindings
+title: Allwinner A10 LRADC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -16,12 +16,26 @@ properties:
       - const: allwinner,sun4i-a10-lradc-keys
       - const: allwinner,sun8i-a83t-r-lradc
       - items:
-          - const: allwinner,sun50i-a64-lradc
+          - enum:
+              - allwinner,suniv-f1c100s-lradc
+              - allwinner,sun50i-a64-lradc
           - const: allwinner,sun8i-a83t-r-lradc
+      - const: allwinner,sun50i-r329-lradc
+      - items:
+          - enum:
+              - allwinner,sun50i-h616-lradc
+              - allwinner,sun20i-d1-lradc
+          - const: allwinner,sun50i-r329-lradc
 
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
   interrupts:
     maxItems: 1
 
@@ -34,14 +48,12 @@ properties:
 patternProperties:
   "^button-[0-9]+$":
     type: object
+    $ref: input.yaml#
     properties:
       label:
-        $ref: /schemas/types.yaml#/definitions/string
         description: Descriptive name of the key
 
-      linux,code:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Keycode to emit
+      linux,code: true
 
       channel:
         $ref: /schemas/types.yaml#/definitions/uint32
@@ -68,6 +80,18 @@ required:
   - interrupts
   - vref-supply
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-r329-lradc
+
+then:
+  required:
+    - clocks
+    - resets
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
index b4ad829d7383..442f623bb294 100644
--- a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
+++ b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
@@ -17,6 +17,7 @@ description: |
 
 allOf:
   - $ref: input.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.txt b/Documentation/devicetree/bindings/input/atmel,captouch.txt
deleted file mode 100644
index fe9ee5c53bcc..000000000000
--- a/Documentation/devicetree/bindings/input/atmel,captouch.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device tree bindings for Atmel capacitive touch device, typically
-an Atmel touch sensor connected to AtmegaXX MCU running firmware
-based on Qtouch library.
-
-The node for this device must be a child of a I2C controller node, as the
-device communicates via I2C.
-
-Required properties:
-
-	compatible:	Must be "atmel,captouch".
-	reg:		The I2C slave address of the device.
-	interrupts:	Property describing the interrupt line the device
-			is connected to. The device only has one interrupt
-			source.
-	linux,keycodes:	Specifies an array of numeric keycode values to
-			be used for reporting button presses. The array can
-			contain up to 8 entries.
-
-Optional properties:
-
-	autorepeat:	Enables the Linux input system's autorepeat
-			feature on the input device.
-
-Example:
-
-	atmel-captouch@51 {
-		compatible = "atmel,captouch";
-		reg = <0x51>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
-		linux,keycodes = <BTN_0>, <BTN_1>,
-			<BTN_2>, <BTN_3>,
-			<BTN_4>, <BTN_5>,
-			<BTN_6>, <BTN_7>;
-		autorepeat;
-	};
diff --git a/Documentation/devicetree/bindings/input/atmel,captouch.yaml b/Documentation/devicetree/bindings/input/atmel,captouch.yaml
new file mode 100644
index 000000000000..f7477091d5a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,captouch.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/atmel,captouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel capacitive touch device
+
+maintainers:
+  - Dharma balasubiramani <dharma.b@microchip.com>
+
+description:
+  Atmel capacitive touch device, typically an Atmel touch sensor connected to
+  AtmegaXX MCU running firmware based on Qtouch library.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: atmel,captouch
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - linux,keycodes
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touch@51 {
+        compatible = "atmel,captouch";
+        reg = <0x51>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <67 IRQ_TYPE_EDGE_FALLING>;
+        linux,keycodes = <BTN_0>, <BTN_1>,
+                         <BTN_2>, <BTN_3>,
+                         <BTN_4>, <BTN_5>,
+                         <BTN_6>, <BTN_7>;
+        autorepeat;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
index 3ec579d63570..d79b254f1cde 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -14,6 +14,10 @@ description: |
   Atmel maXTouch touchscreen or touchpads such as the mXT244
   and similar devices.
 
+allOf:
+  - $ref: input.yaml#
+  - $ref: touchscreen/touchscreen.yaml#
+
 properties:
   compatible:
     const: atmel,maxtouch
@@ -60,6 +64,10 @@ properties:
       or experiment to determine which bit corresponds to which input. Use
       KEY_RESERVED for unused padding values.
 
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
   atmel,wakeup-method:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: |
@@ -88,7 +96,7 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/input/awinic,aw86927.yaml b/Documentation/devicetree/bindings/input/awinic,aw86927.yaml
new file mode 100644
index 000000000000..b7252916bd72
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/awinic,aw86927.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/awinic,aw86927.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW86927 LRA Haptic IC
+
+maintainers:
+  - Griffin Kroah-Hartman <griffin.kroah@fairphone.com>
+
+properties:
+  compatible:
+    const: awinic,aw86927
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vibrator@5a {
+            compatible = "awinic,aw86927";
+            reg = <0x5a>;
+            interrupts-extended = <&tlmm 101 IRQ_TYPE_EDGE_FALLING>;
+            reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
new file mode 100644
index 000000000000..418c168b223b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -0,0 +1,1148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/azoteq,iqs7222.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS7222A/B/C/D Capacitive Touch Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS7222A, IQS7222B, IQS7222C and IQS7222D are multichannel
+  capacitive touch controllers that feature additional sensing capabilities.
+
+  Link to datasheets: https://www.azoteq.com/
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs7222a
+      - azoteq,iqs7222b
+      - azoteq,iqs7222c
+      - azoteq,iqs7222d
+
+  reg:
+    maxItems: 1
+
+  irq-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low RDY output.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low MCLR input. The
+      device is temporarily held in hardware reset prior to initialization if
+      this property is present.
+
+  azoteq,max-counts:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Specifies the maximum number of conversion periods (counts) that can be
+      reported as follows:
+      0: 1023
+      1: 2047
+      2: 4095
+      3: 16384
+
+  azoteq,auto-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Specifies the number of conversions to occur before an interrupt is
+      generated as follows:
+      0: 4
+      1: 8
+      2: 16
+      3: 32
+
+  azoteq,ati-frac-div-fine:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Specifies the preloaded ATI fine fractional divider.
+
+  azoteq,ati-frac-div-coarse:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Specifies the preloaded ATI coarse fractional divider.
+
+  azoteq,ati-comp-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1023
+    description: Specifies the preloaded ATI compensation selection.
+
+  azoteq,lta-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter damping factor to be applied during
+      low-power mode.
+
+  azoteq,lta-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter damping factor to be applied during
+      normal-power mode.
+
+  azoteq,counts-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the counts filter damping factor to be applied during low-power
+      mode.
+
+  azoteq,counts-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the counts filter damping factor to be applied during normal-
+      power mode.
+
+  azoteq,lta-fast-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter fast damping factor to be applied
+      during low-power mode.
+
+  azoteq,lta-fast-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter fast damping factor to be applied
+      during normal-power mode.
+
+  azoteq,timeout-ati-ms:
+    multipleOf: 500
+    minimum: 0
+    maximum: 32767500
+    description:
+      Specifies the delay (in ms) before ATI is retried following an ATI error.
+
+  azoteq,rate-ati-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the rate (in ms) at which ATI status is evaluated.
+
+  azoteq,timeout-np-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from normal-power mode to low-power mode.
+
+  azoteq,rate-np-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during normal-power mode.
+
+  azoteq,timeout-lp-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from low-power mode to ultra-low-power mode.
+
+  azoteq,rate-lp-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during low-power mode.
+
+  azoteq,timeout-ulp-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the rate (in ms) at which channels not regularly sampled during
+      ultra-low-power mode are updated.
+
+  azoteq,rate-ulp-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+  trackpad:
+    type: object
+    description: Represents all channels associated with the trackpad.
+
+    properties:
+      azoteq,channel-select:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 12
+        items:
+          minimum: 0
+          maximum: 13
+        description:
+          Specifies the order of the channels that participate in the trackpad.
+          Specify 255 to omit a given channel for the purpose of mapping a non-
+          rectangular trackpad.
+
+      azoteq,num-rows:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 12
+        description: Specifies the number of rows that comprise the trackpad.
+
+      azoteq,num-cols:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 12
+        description: Specifies the number of columns that comprise the trackpad.
+
+      azoteq,top-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 4
+        minimum: 0
+        maximum: 1020
+        description:
+          Specifies the speed (in coordinates traveled per conversion) after
+          which coordinate filtering is no longer applied.
+
+      azoteq,bottom-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description:
+          Specifies the speed (in coordinates traveled per conversion) after
+          which coordinate filtering is linearly reduced.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Directs the trackpad to respond to the proximity states of the
+          selected channels instead of their corresponding touch states.
+          Note the trackpad cannot report granular coordinates during a
+          state of proximity.
+
+    patternProperties:
+      "^azoteq,lower-cal-(x|y)$":
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's lower starting points.
+
+      "^azoteq,upper-cal-(x|y)$":
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's upper starting points.
+
+      "^event-(press|tap|(swipe|flick)-(x|y)-(pos|neg))$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a press or gesture event reported by the trackpad. Specify
+          'linux,code' under the press event to report absolute coordinates.
+
+        properties:
+          linux,code: true
+
+          azoteq,gesture-angle-tighten:
+            type: boolean
+            description:
+              Limits the tangent of the gesture angle to 0.5 (axial gestures
+              only). If specified in one direction, the effect is applied in
+              either direction.
+
+          azoteq,gesture-max-ms:
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the length of time (in ms) within which a tap, swipe
+              or flick gesture must be completed in order to be acknowledged
+              by the device. The number specified for any one swipe or flick
+              gesture applies to all other swipe or flick gestures.
+
+          azoteq,gesture-min-ms:
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the length of time (in ms) for which a tap gesture must
+              be held in order to be acknowledged by the device.
+
+          azoteq,gesture-dist:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 65535
+            description:
+              Specifies the distance (in coordinates) across which a swipe or
+              flick gesture must travel in order to be acknowledged by the
+              device. The number specified for any one swipe or flick gesture
+              applies to all remaining swipe or flick gestures.
+
+              For tap gestures, this property specifies the distance from the
+              original point of contact across which the contact is permitted
+              to travel before the gesture is rejected by the device.
+
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3
+              2: GPIO4
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              trackpad gesture).
+
+        additionalProperties: false
+
+    required:
+      - azoteq,channel-select
+
+    additionalProperties: false
+
+patternProperties:
+  "^cycle-[0-9]$":
+    type: object
+    description: Represents a conversion cycle serving two sensing channels.
+
+    properties:
+      azoteq,conv-period:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the cycle's conversion period.
+
+      azoteq,conv-frac:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the cycle's conversion frequency fraction.
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 9
+        items:
+          minimum: 0
+          maximum: 8
+        description: Specifies the CTx pin(s) associated with the cycle.
+
+      azoteq,rx-float-inactive:
+        type: boolean
+        description: Floats any inactive CRx pins instead of grounding them.
+
+      azoteq,dead-time-enable:
+        type: boolean
+        description:
+          Increases the denominator of the conversion frequency formula by one.
+
+      azoteq,tx-freq-fosc:
+        type: boolean
+        description:
+          Fixes the conversion frequency to that of the device's core clock.
+
+      azoteq,vbias-enable:
+        type: boolean
+        description: Enables the bias voltage for use during inductive sensing.
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the cycle's sensing mode as follows:
+          0: None
+          1: Self capacitive
+          2: Mutual capacitive
+          3: Inductive
+
+          Note that in the case of IQS7222A, cycles 5 and 6 are restricted to
+          Hall-effect sensing.
+
+      azoteq,iref-enable:
+        type: boolean
+        description:
+          Enables the current reference for use during various sensing modes.
+
+      azoteq,iref-level:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the cycle's current reference level.
+
+      azoteq,iref-trim:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the cycle's current reference trim.
+
+    dependencies:
+      azoteq,iref-level: ["azoteq,iref-enable"]
+      azoteq,iref-trim: ["azoteq,iref-enable"]
+
+    additionalProperties: false
+
+  "^channel-([0-9]|1[0-9])$":
+    type: object
+    description:
+      Represents a single sensing channel. A channel is active if defined and
+      inactive otherwise.
+
+      Note that in the case of IQS7222A, channels 10 and 11 are restricted to
+      Hall-effect sensing with events reported on channel 10 only.
+
+    properties:
+      azoteq,ulp-allow:
+        type: boolean
+        description:
+          Permits the device to enter ultra-low-power mode while the channel
+          lies in a state of touch or proximity.
+
+      azoteq,ref-select:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 9
+        description: Specifies a separate reference channel to be followed.
+
+      azoteq,ref-weight:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the relative weight of the reference channel.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Activates the reference channel in response to proximity events
+          instead of touch events.
+
+      azoteq,counts-filt-enable:
+        type: boolean
+        description: Applies counts filtering to the channel.
+
+      azoteq,ati-band:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the channel's ATI band as a fraction of its ATI target as
+          follows:
+          0: 1/16
+          1: 1/8
+          2: 1/4
+          3: 1/2
+
+      azoteq,global-halt:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze if any
+          other participating channel lies in a proximity or touch state.
+
+      azoteq,invert-enable:
+        type: boolean
+        description:
+          Inverts the polarity of the states reported for proximity and touch
+          events relative to their respective thresholds.
+
+      azoteq,dual-direction:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze in the
+          presence of either increasing or decreasing counts, thereby permit-
+          ting events to be reported in either direction.
+
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        items:
+          minimum: 0
+          maximum: 7
+        description: Specifies the CRx pin(s) associated with the channel.
+
+      azoteq,samp-cap-double:
+        type: boolean
+        description: Doubles the sampling capacitance from 40 pF to 80 pF.
+
+      azoteq,vref-half:
+        type: boolean
+        description: Halves the discharge threshold from 1.0 V to 0.5 V.
+
+      azoteq,proj-bias:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the bias current applied during mutual (projected)
+          capacitive sensing as follows:
+          0: 2 uA
+          1: 5 uA
+          2: 7 uA
+          3: 10 uA
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 8
+        minimum: 0
+        maximum: 2040
+        description: Specifies the channel's ATI target.
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 16
+        minimum: 0
+        maximum: 496
+        description: Specifies the channel's ATI base.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5]
+        description: |
+          Specifies the channel's ATI mode as follows:
+          0: Disabled
+          1: Compensation
+          2: Compensation divider
+          3: Fine fractional divider
+          4: Coarse fractional divider
+          5: Full
+
+      azoteq,ati-frac-div-fine:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI fine fractional divider.
+
+      azoteq,ati-frac-mult-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's ATI coarse fractional multiplier.
+
+      azoteq,ati-frac-div-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI coarse fractional divider.
+
+      azoteq,ati-comp-div:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI compensation divider.
+
+      azoteq,ati-comp-select:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1023
+        description: Specifies the channel's ATI compensation selection.
+
+      azoteq,debounce-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's debounce entrance factor.
+
+      azoteq,debounce-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's debounce exit factor.
+
+    patternProperties:
+      "^event-(prox|touch)$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a proximity or touch event reported by the channel.
+
+        properties:
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3
+              2: GPIO4
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              slider/trackpad gesture).
+
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Specifies the threshold for the event. Valid entries range from
+              0-127 and 0-255 for proximity and touch events, respectively.
+
+          azoteq,hyst:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            description:
+              Specifies the hysteresis for the event (touch events only).
+
+          azoteq,timeout-press-ms:
+            multipleOf: 500
+            minimum: 0
+            maximum: 127500
+            description:
+              Specifies the length of time (in ms) to wait before automatically
+              releasing a press event. Specify zero to allow the press state to
+              persist indefinitely.
+
+              The IQS7222B does not feature channel-specific timeouts; the time-
+              out specified for any one channel applies to all channels.
+
+          linux,code: true
+
+          linux,input-type:
+            enum: [1, 5]
+            default: 1
+            description:
+              Specifies whether the event is to be interpreted as a key (1)
+              or a switch (5).
+
+        additionalProperties: false
+
+    dependencies:
+      azoteq,ref-weight: ["azoteq,ref-select"]
+      azoteq,use-prox: ["azoteq,ref-select"]
+
+    additionalProperties: false
+
+  "^slider-[0-1]$":
+    type: object
+    description: Represents a slider comprising three or four channels.
+
+    properties:
+      azoteq,channel-select:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 3
+        maxItems: 4
+        items:
+          minimum: 0
+          maximum: 9
+        description:
+          Specifies the order of the channels that participate in the slider.
+
+      azoteq,slider-size:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 65535
+        description:
+          Specifies the slider's one-dimensional resolution, equal to the
+          maximum coordinate plus one.
+
+      azoteq,lower-cal:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the slider's lower starting point.
+
+      azoteq,upper-cal:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the slider's upper starting point.
+
+      azoteq,top-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description:
+          Specifies the speed (in coordinates traveled per conversion) after
+          which coordinate filtering is no longer applied.
+
+      azoteq,bottom-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description:
+          Specifies the speed (in coordinates traveled per conversion) after
+          which coordinate filtering is linearly reduced.
+
+      azoteq,bottom-beta:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+        description:
+          Specifies the coordinate filter damping factor to be applied
+          while the speed of movement is below that which is specified
+          by azoteq,bottom-speed.
+
+      azoteq,static-beta:
+        type: boolean
+        description:
+          Applies the coordinate filter damping factor specified by
+          azoteq,bottom-beta regardless of the speed of movement.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Directs the slider to respond to the proximity states of the selected
+          channels instead of their corresponding touch states. Note the slider
+          cannot report granular coordinates during a state of proximity.
+
+      linux,axis:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Specifies the absolute axis to which coordinates are mapped. Specify
+          ABS_WHEEL to operate the slider as a wheel (IQS7222C only).
+
+    patternProperties:
+      "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a press or gesture (IQS7222A only) event reported by
+          the slider.
+
+        properties:
+          linux,code: true
+
+          azoteq,gesture-max-ms:
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the length of time (in ms) within which a tap, swipe
+              or flick gesture must be completed in order to be acknowledged
+              by the device. The number specified for any one swipe or flick
+              gesture applies to all remaining swipe or flick gestures.
+
+          azoteq,gesture-min-ms:
+            multipleOf: 16
+            minimum: 0
+            maximum: 496
+            description:
+              Specifies the length of time (in ms) for which a tap gesture must
+              be held in order to be acknowledged by the device.
+
+          azoteq,gesture-dist:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the distance (in coordinates) across which a swipe or
+              flick gesture must travel in order to be acknowledged by the
+              device. The number specified for any one swipe or flick gesture
+              applies to all remaining swipe or flick gestures.
+
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3
+              2: GPIO4
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              slider gesture).
+
+        additionalProperties: false
+
+    required:
+      - azoteq,channel-select
+
+    additionalProperties: false
+
+  "^gpio-[0-2]$":
+    type: object
+    description: |
+      Represents a GPIO mapped to one or more events as follows:
+      gpio-0: GPIO0
+      gpio-1: GPIO3
+      gpio-2: GPIO4
+
+    allOf:
+      - $ref: /schemas/pinctrl/pincfg-node.yaml#
+
+    properties:
+      drive-open-drain: true
+
+    additionalProperties: false
+
+allOf:
+  - $ref: touchscreen/touchscreen.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - azoteq,iqs7222a
+              - azoteq,iqs7222b
+              - azoteq,iqs7222c
+
+    then:
+      properties:
+        touchscreen-size-x: false
+        touchscreen-size-y: false
+        touchscreen-inverted-x: false
+        touchscreen-inverted-y: false
+        touchscreen-swapped-x-y: false
+
+        trackpad: false
+
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,counts-filt-enable: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - azoteq,iqs7222b
+              - azoteq,iqs7222c
+
+    then:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,ulp-allow: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - azoteq,iqs7222b
+              - azoteq,iqs7222d
+
+    then:
+      patternProperties:
+        "^cycle-[0-9]$":
+          properties:
+            azoteq,iref-enable: false
+
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,ref-select: false
+
+        "^slider-[0-1]$": false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7222b
+
+    then:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          patternProperties:
+            "^event-(prox|touch)$":
+              properties:
+                azoteq,gpio-select: false
+
+        "^gpio-[0-2]$": false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7222a
+
+    then:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          patternProperties:
+            "^event-(prox|touch)$":
+              properties:
+                azoteq,gpio-select:
+                  maxItems: 1
+                  items:
+                    maximum: 0
+
+        "^slider-[0-1]$":
+          properties:
+            azoteq,slider-size:
+              multipleOf: 16
+              minimum: 16
+              maximum: 4080
+
+            azoteq,top-speed:
+              multipleOf: 4
+              maximum: 1020
+
+          patternProperties:
+            "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+              properties:
+                azoteq,gpio-select:
+                  maxItems: 1
+                  items:
+                    maximum: 0
+
+    else:
+      patternProperties:
+        "^slider-[0-1]$":
+          patternProperties:
+            "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+              properties:
+                azoteq,gesture-max-ms: false
+
+                azoteq,gesture-min-ms: false
+
+                azoteq,gesture-dist: false
+
+required:
+  - compatible
+  - reg
+  - irq-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/input.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs7222a@44 {
+                    compatible = "azoteq,iqs7222a";
+                    reg = <0x44>;
+                    irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                    azoteq,lta-beta-lp = <7>;
+                    azoteq,lta-beta-np = <8>;
+                    azoteq,counts-beta-lp = <2>;
+                    azoteq,counts-beta-np = <3>;
+                    azoteq,lta-fast-beta-lp = <3>;
+                    azoteq,lta-fast-beta-np = <4>;
+
+                    cycle-0 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <1>, <2>, <4>, <5>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-1 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <5>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-2 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <4>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-3 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <2>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-4 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <1>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-5 {
+                            azoteq,conv-period = <2>;
+                            azoteq,conv-frac = <0>;
+                    };
+
+                    cycle-6 {
+                            azoteq,conv-period = <2>;
+                            azoteq,conv-frac = <0>;
+                    };
+
+                    channel-0 {
+                            azoteq,ulp-allow;
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <800>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-1 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-2 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-3 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-4 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-5 {
+                            azoteq,ulp-allow;
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <800>;
+                            azoteq,ati-base = <144>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-6 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_MUTE>;
+                            };
+                    };
+
+                    channel-7 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_VOLUMEDOWN>;
+                            };
+                    };
+
+                    channel-8 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_VOLUMEUP>;
+                            };
+                    };
+
+                    channel-9 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_POWER>;
+                            };
+                    };
+
+                    channel-10 {
+                            azoteq,ulp-allow;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <112>;
+
+                            event-touch {
+                                    linux,code = <SW_LID>;
+                                    linux,input-type = <EV_SW>;
+                            };
+                    };
+
+                    channel-11 {
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <112>;
+                    };
+
+                    slider-0 {
+                            azoteq,channel-select = <1>, <2>, <3>, <4>;
+                            azoteq,slider-size = <4080>;
+                            azoteq,upper-cal = <50>;
+                            azoteq,lower-cal = <30>;
+                            azoteq,top-speed = <200>;
+                            azoteq,bottom-speed = <1>;
+                            azoteq,bottom-beta = <3>;
+
+                            event-tap {
+                                    linux,code = <KEY_PLAYPAUSE>;
+                                    azoteq,gesture-max-ms = <400>;
+                                    azoteq,gesture-min-ms = <32>;
+                            };
+
+                            event-flick-pos {
+                                    linux,code = <KEY_NEXTSONG>;
+                                    azoteq,gesture-max-ms = <800>;
+                                    azoteq,gesture-dist = <800>;
+                            };
+
+                            event-flick-neg {
+                                    linux,code = <KEY_PREVIOUSSONG>;
+                            };
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml b/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
new file mode 100644
index 000000000000..89bd06864bd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cirrus,cs40l50.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS40L50 Advanced Haptic Driver
+
+maintainers:
+  - James Ogletree <jogletre@opensource.cirrus.com>
+
+description:
+  CS40L50 is a haptic driver with waveform memory,
+  integrated DSP, and closed-loop algorithms.
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs40l50
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-a-supply:
+    description: Power supply for internal analog circuits.
+
+  vdd-p-supply:
+    description: Power supply for always-on circuits.
+
+  vdd-io-supply:
+    description: Power supply for digital input/output.
+
+  vdd-b-supply:
+    description: Power supply for the boost converter.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - vdd-io-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      haptic-driver@34 {
+        compatible = "cirrus,cs40l50";
+        reg = <0x34>;
+        interrupt-parent = <&gpio>;
+        interrupts = <113 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio 112 GPIO_ACTIVE_LOW>;
+        vdd-io-supply = <&vreg>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml
new file mode 100644
index 000000000000..a0d2460c55ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cirrus,ep9307-keypad.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cirrus,ep9307-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus ep93xx keypad
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+description:
+  The KPP is designed to interface with a keypad matrix with 2-point contact
+  or 3-point contact keys. The KPP is designed to simplify the software task
+  of scanning a keypad matrix. The KPP is capable of detecting, debouncing,
+  and decoding one or multiple keys pressed simultaneously on a keypad.
+
+properties:
+  compatible:
+    oneOf:
+      - const: cirrus,ep9307-keypad
+      - items:
+          - enum:
+              - cirrus,ep9312-keypad
+              - cirrus,ep9315-keypad
+          - const: cirrus,ep9307-keypad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  debounce-delay-ms:
+    description: |
+          Time in microseconds that key must be pressed or
+          released for state change interrupt to trigger.
+
+  cirrus,prescale:
+    description: row/column counter pre-scaler load value
+    $ref: /schemas/types.yaml#/definitions/uint16
+    maximum: 1023
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/clock/cirrus,ep9301-syscon.h>
+    keypad@800f0000 {
+        compatible = "cirrus,ep9307-keypad";
+        reg = <0x800f0000 0x0c>;
+        interrupt-parent = <&vic0>;
+        interrupts = <29>;
+        clocks = <&eclk EP93XX_CLK_KEYPAD>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&keypad_default_pins>;
+        linux,keymap = <KEY_UP>,
+                       <KEY_DOWN>,
+                       <KEY_VOLUMEDOWN>,
+                       <KEY_HOME>,
+                       <KEY_RIGHT>,
+                       <KEY_LEFT>,
+                       <KEY_ENTER>,
+                       <KEY_VOLUMEUP>,
+                       <KEY_F6>,
+                       <KEY_F8>,
+                       <KEY_F9>,
+                       <KEY_F10>,
+                       <KEY_F1>,
+                       <KEY_F2>,
+                       <KEY_F3>,
+                       <KEY_POWER>;
+    };
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
deleted file mode 100644
index d3db65916a36..000000000000
--- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Cypress I2C Touchpad
-
-Required properties:
-- compatible: must be "cypress,cyapa".
-- reg: I2C address of the chip.
-- interrupts: interrupt to which the chip is connected (see interrupt
-	binding[0]).
-
-Optional properties:
-- wakeup-source: touchpad can be used as a wakeup source.
-- pinctrl-names: should be "default" (see pinctrl binding [1]).
-- pinctrl-0: a phandle pointing to the pin settings for the device (see
-	pinctrl binding [1]).
-- vcc-supply: a phandle for the regulator supplying 3.3V power.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Example:
-	&i2c0 {
-		/* ... */
-
-		/* Cypress Gen3 touchpad */
-		touchpad@67 {
-			compatible = "cypress,cyapa";
-			reg = <0x67>;
-			interrupt-parent = <&gpio>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
-			wakeup-source;
-		};
-
-		/* Cypress Gen5 and later touchpad */
-		touchpad@24 {
-			compatible = "cypress,cyapa";
-			reg = <0x24>;
-			interrupt-parent = <&gpio>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
-			wakeup-source;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml
new file mode 100644
index 000000000000..da629d511da1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress,cyapa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: cypress,cyapa
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  vcc-supply:
+    description: 3.3V power
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        trackpad@67 {
+            reg = <0x67>;
+            compatible = "cypress,cyapa";
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpx1>;
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt
deleted file mode 100644
index 5f9fbc68e58a..000000000000
--- a/Documentation/devicetree/bindings/input/da9062-onkey.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* Dialog DA9061/62/63 OnKey Module
-
-This module is part of the DA9061/DA9062/DA9063. For more details about entire
-DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-For DA9063 see Documentation/devicetree/bindings/mfd/da9063.txt
-
-This module provides the KEY_POWER event.
-
-Required properties:
-
-- compatible: should be one of the following valid compatible string lines:
-	"dlg,da9061-onkey", "dlg,da9062-onkey"
-	"dlg,da9062-onkey"
-	"dlg,da9063-onkey"
-
-Optional properties:
-
-- dlg,disable-key-power : Disable power-down using a long key-press. If this
-    entry exists the OnKey driver will remove support for the KEY_POWER key
-    press when triggered using a long press of the OnKey.
-
-Example: DA9063
-
-	pmic0: da9063@58 {
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			dlg,disable-key-power;
-		};
-	};
-
-Example: DA9062
-
-	pmic0: da9062@58 {
-		onkey {
-			compatible = "dlg,da9062-onkey";
-			dlg,disable-key-power;
-		};
-	};
-
-Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
-
-	pmic0: da9061@58 {
-		onkey {
-			compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
-			dlg,disable-key-power;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/dlg,da7280.txt b/Documentation/devicetree/bindings/input/dlg,da7280.txt
deleted file mode 100644
index 96ee5d50e111..000000000000
--- a/Documentation/devicetree/bindings/input/dlg,da7280.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-Dialog Semiconductor DA7280 Haptics bindings
-
-Required properties:
-- compatible: Should be "dlg,da7280".
-- reg: Specifies the I2C slave address.
-
-- interrupt-parent : Specifies the phandle of the interrupt controller to
-  which the IRQs from DA7280 are delivered to.
-
-- dlg,actuator-type: Set Actuator type. it should be one of:
-  "LRA" - Linear Resonance Actuator type.
-  "ERM-bar" - Bar type Eccentric Rotating Mass.
-  "ERM-coin" - Coin type Eccentric Rotating Mass.
-
-- dlg,const-op-mode: Haptic operation mode for FF_CONSTANT.
-  Possible values:
-	1 - Direct register override(DRO) mode triggered by i2c(default),
-	2 - PWM data source mode controlled by PWM duty,
-- dlg,periodic-op-mode: Haptic operation mode for FF_PERIODIC.
-  Possible values:
-	1 - Register triggered waveform memory(RTWM) mode, the pattern
-	    assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP,
-	2 - Edge triggered waveform memory(ETWM) mode, external GPI(N)
-	    control are required to enable/disable and it needs to keep
-	    device enabled by sending magnitude (X > 0),
-	    the pattern is assigned to the GPI(N)_SEQUENCE_ID below.
-	The default value is 1 for both of the operation modes.
-	For more details, please see the datasheet.
-
-- dlg,nom-microvolt: Nominal actuator voltage rating.
-  Valid values: 0 - 6000000.
-- dlg,abs-max-microvolt: Absolute actuator maximum voltage rating.
-  Valid values: 0 - 6000000.
-- dlg,imax-microamp: Actuator max current rating.
-  Valid values: 0 - 252000.
-  Default: 130000.
-- dlg,impd-micro-ohms: the impedance of the actuator in micro ohms.
-  Valid values: 0 - 1500000000.
-
-Optional properties:
-- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
-  PWM properties should be named "pwms". And number of cell is different
-  for each pwm device.
-  (See Documentation/devicetree/bindings/pwm/pwm.txt
-   for further information relating to pwm properties)
-
-- dlg,ps-seq-id: the PS_SEQ_ID(pattern ID in waveform memory inside chip)
-  to play back when RTWM-MODE is enabled.
-  Valid range: 0 - 15.
-- dlg,ps-seq-loop: the PS_SEQ_LOOP, Number of times the pre-stored sequence
-  pointed to by PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated.
-  Valid range: 0 - 15.
-- dlg,gpiN-seq-id: the GPI(N)_SEQUENCE_ID, pattern to play
-  when gpi0 is triggered, 'N' must be 0 - 2.
-  Valid range: 0 - 15.
-- dlg,gpiN-mode: the pattern mode which can select either
-  "Single-pattern" or "Multi-pattern", 'N' must be 0 - 2.
-- dlg,gpiN-polarity: gpiN polarity which can be chosen among
-  "Rising-edge", "Falling-edge" and "Both-edge",
-  'N' must be 0 - 2
-  Haptic will work by this edge option in case of ETWM mode.
-
-- dlg,resonant-freq-hz: use in case of LRA.
-  the frequency range: 50 - 300.
-  Default: 205.
-
-- dlg,bemf-sens-enable: Enable for internal loop computations.
-- dlg,freq-track-enable: Enable for resonant frequency tracking.
-- dlg,acc-enable: Enable for active acceleration.
-- dlg,rapid-stop-enable: Enable for rapid stop.
-- dlg,amp-pid-enable: Enable for the amplitude PID.
-- dlg,mem-array: Customized waveform memory(patterns) data downloaded to
-  the device during initialization. This is an array of 100 values(u8).
-
-For further information, see device datasheet.
-
-======
-
-Example:
-
-	haptics: da7280-haptics@4a {
-		compatible = "dlg,da7280";
-		reg = <0x4a>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		dlg,actuator-type = "LRA";
-		dlg,dlg,const-op-mode = <1>;
-		dlg,dlg,periodic-op-mode = <1>;
-		dlg,nom-microvolt = <2000000>;
-		dlg,abs-max-microvolt = <2000000>;
-		dlg,imax-microamp = <170000>;
-		dlg,resonant-freq-hz = <180>;
-		dlg,impd-micro-ohms = <10500000>;
-		dlg,freq-track-enable;
-		dlg,rapid-stop-enable;
-		dlg,mem-array = <
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		  0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
-		>;
-	};
diff --git a/Documentation/devicetree/bindings/input/dlg,da7280.yaml b/Documentation/devicetree/bindings/input/dlg,da7280.yaml
new file mode 100644
index 000000000000..0d06755aaaa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/dlg,da7280.yaml
@@ -0,0 +1,248 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/dlg,da7280.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA7280 Low Power High-Definition Haptic Driver
+
+maintainers:
+  - Roy Im <roy.im.opensource@diasemi.com>
+
+properties:
+  compatible:
+    const: dlg,da7280
+
+  reg:
+    maxItems: 1
+    description: I2C address of the device.
+
+  interrupts:
+    maxItems: 1
+
+  dlg,actuator-type:
+    enum:
+      - LRA # Linear Resonance Actuator type
+      - ERM-bar # Bar type Eccentric Rotating Mass
+      - ERM-coin # Coin type Eccentric Rotating Mass
+
+  dlg,const-op-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1 # Direct register override (DRO) mode triggered by i2c (default)
+      - 2 # PWM data source mode controlled by PWM duty
+    description:
+      Haptic operation mode for FF_CONSTANT
+
+  dlg,periodic-op-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1 # Register triggered waveform memory(RTWM) mode, the pattern
+          # assigned to the PS_SEQ_ID played as much times as PS_SEQ_LOOP
+      - 2 # Edge triggered waveform memory(ETWM) mode, external GPI(N)
+          # control are required to enable/disable and it needs to keep
+          # device enabled by sending magnitude (X > 0),
+          # the pattern is assigned to the GPI(N)_SEQUENCE_ID below
+    default: 1
+    description:
+      Haptic operation mode for FF_PERIODIC.
+      The default value is 1 for both of the operation modes.
+      For more details, please see the datasheet
+
+  dlg,nom-microvolt:
+    minimum: 0
+    maximum: 6000000
+    description:
+      Nominal actuator voltage rating
+
+  dlg,abs-max-microvolt:
+    minimum: 0
+    maximum: 6000000
+    description:
+      Absolute actuator maximum voltage rating
+
+  dlg,imax-microamp:
+    minimum: 0
+    maximum: 252000
+    default: 130000
+    description:
+      Actuator max current rating
+
+  dlg,impd-micro-ohms:
+    minimum: 0
+    maximum: 1500000000
+    description:
+      Impedance of the actuator
+
+  pwms:
+    maxItems: 1
+
+  dlg,ps-seq-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      The PS_SEQ_ID(pattern ID in waveform memory inside chip)
+      to play back when RTWM-MODE is enabled
+
+  dlg,ps-seq-loop:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      The PS_SEQ_LOOP, Number of times the pre-stored sequence pointed to by
+      PS_SEQ_ID or GPI(N)_SEQUENCE_ID is repeated
+
+  dlg,gpi0-seq-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      the GPI0_SEQUENCE_ID, pattern to play when gpi0 is triggered
+
+  dlg,gpi1-seq-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      the GPI1_SEQUENCE_ID, pattern to play when gpi1 is triggered
+
+  dlg,gpi2-seq-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      the GPI2_SEQUENCE_ID, pattern to play when gpi2 is triggered
+
+  dlg,gpi0-mode:
+    enum:
+      - Single-pattern
+      - Multi-pattern
+    description:
+      Pattern mode for gpi0
+
+  dlg,gpi1-mode:
+    enum:
+      - Single-pattern
+      - Multi-pattern
+    description:
+      Pattern mode for gpi1
+
+  dlg,gpi2-mode:
+    enum:
+      - Single-pattern
+      - Multi-pattern
+    description:
+      Pattern mode for gpi2
+
+  dlg,gpi0-polarity:
+    enum:
+      - Rising-edge
+      - Falling-edge
+      - Both-edge
+    description:
+      gpi0 polarity, Haptic will work by this edge option in case of ETWM mode
+
+  dlg,gpi1-polarity:
+    enum:
+      - Rising-edge
+      - Falling-edge
+      - Both-edge
+    description:
+      gpi1 polarity, Haptic will work by this edge option in case of ETWM mode
+
+  dlg,gpi2-polarity:
+    enum:
+      - Rising-edge
+      - Falling-edge
+      - Both-edge
+    description:
+      gpi2 polarity, Haptic will work by this edge option in case of ETWM mode
+
+  dlg,resonant-freq-hz:
+    minimum: 50
+    maximum: 300
+    default: 205
+
+  dlg,bemf-sens-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable for internal loop computations
+
+  dlg,freq-track-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable for resonant frequency tracking
+
+  dlg,acc-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable for active acceleration
+
+  dlg,rapid-stop-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable for rapid stop
+
+  dlg,amp-pid-enable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable for the amplitude PID
+
+  dlg,mem-array:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 100
+    description:
+      Customized waveform memory (patterns) data downloaded to the device during initialization.
+      Each entry value must be included between 0 and 255.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dlg,actuator-type
+  - dlg,const-op-mode
+  - dlg,periodic-op-mode
+  - dlg,nom-microvolt
+  - dlg,abs-max-microvolt
+  - dlg,imax-microamp
+  - dlg,impd-micro-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        haptics@4a {
+            compatible = "dlg,da7280";
+            reg = <0x4a>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+            dlg,actuator-type = "LRA";
+            dlg,const-op-mode = <1>;
+            dlg,periodic-op-mode = <1>;
+            dlg,nom-microvolt = <2000000>;
+            dlg,abs-max-microvolt = <2000000>;
+            dlg,imax-microamp = <170000>;
+            dlg,resonant-freq-hz = <180>;
+            dlg,impd-micro-ohms = <10500000>;
+            dlg,freq-track-enable;
+            dlg,rapid-stop-enable;
+            dlg,mem-array = <0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+                             0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml
new file mode 100644
index 000000000000..1480d95421e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/dlg,da9062-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9061/62/63 OnKey Module
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This module is part of the DA9061/DA9062/DA9063. For more details about entire
+  DA906{1,2,3} chips see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
+
+  This module provides the KEY_POWER event.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - dlg,da9062-onkey
+          - dlg,da9063-onkey
+      - items:
+          - const: dlg,da9061-onkey
+          - const: dlg,da9062-onkey
+
+  dlg,disable-key-power:
+    type: boolean
+    description:
+      Disable power-down using a long key-press. If this entry exists
+      the OnKey driver will remove support for the KEY_POWER key press
+      when triggered using a long press of the OnKey.
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml
index 2a9bb6ace021..24dc2d69613f 100644
--- a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml
+++ b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/input/elan,ekth3000.yaml#
diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
new file mode 100644
index 000000000000..0840e4ab28b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/elan,ekth6915.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan I2C-HID touchscreen controllers
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description:
+  Supports the Elan eKTH6915 and other I2C-HID touchscreen controllers.
+  These touchscreen controller use the i2c-hid protocol with a reset GPIO.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - elan,ekth5015m
+          - const: elan,ekth6915
+      - items:
+          - const: elan,ekth8d18
+          - const: elan,ekth6a12nay
+      - enum:
+          - elan,ekth6915
+          - elan,ekth6a12nay
+
+  reg: true
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
+
+  no-reset-on-power-off:
+    type: boolean
+    description:
+      Reset line is wired so that it can (and should) be left deasserted when
+      the power supply is off.
+
+  vcc33-supply:
+    description: The 3.3V supply to the touchscreen.
+
+  vccio-supply:
+    description:
+      The IO supply to the touchscreen. Need not be specified if this is the
+      same as the 3.3V supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@10 {
+        compatible = "elan,ekth5015m", "elan,ekth6915";
+        reg = <0x10>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_ts>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
index 878464f128dc..5139af287d3e 100644
--- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
+++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
@@ -57,7 +57,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        mpr121@5a {
+        touchkey@5a {
             compatible = "fsl,mpr121-touchkey";
             reg = <0x5a>;
             interrupt-parent = <&gpio1>;
@@ -77,7 +77,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        mpr121@5a {
+        touchkey@5a {
             compatible = "fsl,mpr121-touchkey";
             reg = <0x5a>;
             poll-interval = <20>;
diff --git a/Documentation/devicetree/bindings/input/fsl,scu-key.yaml b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
new file mode 100644
index 000000000000..29921aab9d97
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/fsl,scu-key.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - SCU Key Based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-key
+      - const: fsl,imx-sc-key
+
+  linux,keycodes:
+    maxItems: 1
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - linux,keycodes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+
+    keys {
+        compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+        linux,keycodes = <KEY_POWER>;
+    };
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
index fe1c5016f7f3..358cb8275bf1 100644
--- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
+++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
@@ -14,10 +14,16 @@ description:
   This touchscreen uses the i2c-hid protocol but has some non-standard
   power sequencing required.
 
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
 properties:
   compatible:
-    items:
+    oneOf:
       - const: goodix,gt7375p
+      - items:
+          - const: goodix,gt7986u
+          - const: goodix,gt7375p
 
   reg:
     enum:
@@ -27,12 +33,30 @@ properties:
   interrupts:
     maxItems: 1
 
+  panel: true
+
   reset-gpios:
     true
 
   vdd-supply:
     description: The 3.3V supply to the touchscreen.
 
+  mainboard-vddio-supply:
+    description:
+      The supply on the main board needed to power up IO signals going
+      to the touchscreen. This supply need not go to the touchscreen
+      itself as long as it allows the main board to make signals compatible
+      with what the touchscreen is expecting for its IO rails.
+
+  goodix,no-reset-during-suspend:
+    description:
+      Set this to true to enforce the driver to not assert the reset GPIO
+      during suspend.
+      Due to potential touchscreen hardware flaw, back-powering could happen in
+      suspend if the power supply is on and with active-low reset GPIO asserted.
+      This property is used to avoid the back-powering issue.
+    type: boolean
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml b/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml
new file mode 100644
index 000000000000..92bd0041feba
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/goodix,gt7986u-spifw.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/goodix,gt7986u-spifw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix GT7986U SPI HID Touchscreen
+
+maintainers:
+  - Charles Wang <charles.goodix@gmail.com>
+
+description: |
+  Supports the Goodix GT7986U touchscreen.
+  This touch controller reports data packaged according to the HID protocol
+  over the SPI bus, but it is incompatible with Microsoft's HID-over-SPI protocol.
+
+  NOTE: these bindings are distinct from the bindings used with the
+  GT7986U when the chip is running I2C firmware. This is because there's
+  not a single device that talks over both I2C and SPI but rather
+  distinct touchscreens that happen to be built with the same ASIC but
+  that are distinct products running distinct firmware.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - goodix,gt7986u-spifw
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@0 {
+        compatible = "goodix,gt7986u-spifw";
+        reg = <0>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        spi-max-frequency = <10000000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
index 5377b232fa10..fefaaf46a240 100644
--- a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
+++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
@@ -10,20 +10,21 @@ title: ChromeOS EC Keyboard
 maintainers:
   - Simon Glass <sjg@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   Google's ChromeOS EC Keyboard is a simple matrix keyboard
   implemented on a separate EC (Embedded Controller) device. It provides
   a message for reading key scans from the EC. These are then converted
-  into keycodes for processing by the kernel.
-
-allOf:
-  - $ref: "/schemas/input/matrix-keymap.yaml#"
+  into keycodes for processing by the kernel. This device also supports
+  switches/buttons like power and volume buttons.
 
 properties:
   compatible:
-    const: google,cros-ec-keyb
+    oneOf:
+      - description: ChromeOS EC with only buttons/switches
+        const: google,cros-ec-keyb-switches
+      - description: ChromeOS EC with keyboard and possibly buttons/switches
+        const: google,cros-ec-keyb
 
   google,needs-ghost-filter:
     description:
@@ -32,6 +33,7 @@ properties:
     type: boolean
 
   function-row-physmap:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 15
     description: |
@@ -42,15 +44,31 @@ properties:
       where the lower 16 bits are reserved. This property is specified only
       when the keyboard has a custom design for the top row keys.
 
+dependencies:
+  function-row-physmap: [ 'linux,keymap' ]
+  google,needs-ghost-filter: [ 'linux,keymap' ]
+
 required:
   - compatible
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: google,cros-ec-keyb
+then:
+  $ref: /schemas/input/matrix-keymap.yaml#
+  required:
+    - keypad,num-rows
+    - keypad,num-columns
+    - linux,keymap
+
 unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/input/input.h>
-    cros-ec-keyb {
+    keyboard-controller {
         compatible = "google,cros-ec-keyb";
         keypad,num-rows = <8>;
         keypad,num-columns = <13>;
@@ -114,3 +132,9 @@ examples:
             /* UP      LEFT    */
             0x070b0067 0x070c0069>;
     };
+  - |
+    /* No matrix keyboard, just buttons/switches */
+    keyboard-controller {
+        compatible = "google,cros-ec-keyb-switches";
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.txt b/Documentation/devicetree/bindings/input/gpio-beeper.txt
deleted file mode 100644
index a5086e37fce6..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-beeper.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* GPIO beeper device tree bindings
-
-Register a beeper connected to GPIO pin.
-
-Required properties:
-- compatible:	Should be "gpio-beeper".
-- gpios:	From common gpio binding; gpio connection to beeper enable pin.
-
-Example:
-	beeper: beeper {
-		compatible = "gpio-beeper";
-		gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.yaml b/Documentation/devicetree/bindings/input/gpio-beeper.yaml
new file mode 100644
index 000000000000..290372add3d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-beeper.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-beeper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled beeper
+
+maintainers:
+  - Fabio Estevam <festevam@denx.de>
+
+properties:
+  compatible:
+    const: gpio-beeper
+
+  gpios:
+    maxItems: 1
+    description:
+      GPIO that drives the beeper.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    beeper {
+        compatible = "gpio-beeper";
+        gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index dbe7ecc19ccb..cc78c2152921 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device-Tree bindings for GPIO attached keys
+title: GPIO attached keys
 
 maintainers:
   - Rob Herring <robh@kernel.org>
@@ -15,113 +15,136 @@ properties:
       - gpio-keys
       - gpio-keys-polled
 
-patternProperties:
-  ".*":
-    if:
-      type: object
-    then:
-      $ref: input.yaml#
-
-      properties:
-        gpios:
-          maxItems: 1
-
-        interrupts:
-          maxItems: 1
-
-        label:
-          description: Descriptive name of the key.
-
-        linux,code:
-          description: Key / Axis code to emit.
-          $ref: /schemas/types.yaml#/definitions/uint32
-
-        linux,input-type:
-          description:
-            Specify event type this button/key generates. If not specified defaults to
-            <1> == EV_KEY.
-          $ref: /schemas/types.yaml#/definitions/uint32
-
-          default: 1
-
-        linux,input-value:
-          description: |
-            If linux,input-type is EV_ABS or EV_REL then this
-            value is sent for events this button generates when pressed.
-            EV_ABS/EV_REL axis will generate an event with a value of 0
-            when all buttons with linux,input-type == type and
-            linux,code == axis are released. This value is interpreted
-            as a signed 32 bit value, e.g. to make a button generate a
-            value of -1 use:
-
-            linux,input-value = <0xffffffff>; /* -1 */
-
-          $ref: /schemas/types.yaml#/definitions/uint32
-
-        debounce-interval:
-          description:
-            Debouncing interval time in milliseconds. If not specified defaults to 5.
-          $ref: /schemas/types.yaml#/definitions/uint32
-
-          default: 5
-
-        wakeup-source:
-          description: Button can wake-up the system.
-
-        wakeup-event-action:
-          description: |
-            Specifies whether the key should wake the system when asserted, when
-            deasserted, or both. This property is only valid for keys that wake up the
-            system (e.g., when the "wakeup-source" property is also provided).
+  autorepeat: true
 
-            Supported values are defined in linux-event-codes.h:
+  label:
+    description: Name of entire device
 
-              EV_ACT_ANY        - both asserted and deasserted
-              EV_ACT_ASSERTED   - asserted
-              EV_ACT_DEASSERTED - deasserted
-          $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [0, 1, 2]
+  poll-interval: true
 
-        linux,can-disable:
-          description:
-            Indicates that button is connected to dedicated (not shared) interrupt
-            which can be disabled to suppress events from the button.
-          type: boolean
-
-        pinctrl-0:
-          maxItems: 1
-
-        pinctrl-names:
-          maxItems: 1
-
-      required:
-        - linux,code
-
-      anyOf:
-        - required:
+patternProperties:
+  "^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$":
+    $ref: input.yaml#
+
+    properties:
+      gpios:
+        maxItems: 1
+
+      interrupts:
+        oneOf:
+          - items:
+              - description: Optional key interrupt or wakeup interrupt
+          - items:
+              - description: Key interrupt
+              - description: Wakeup interrupt
+
+      interrupt-names:
+        description:
+          Optional interrupt names, can be used to specify a separate dedicated
+          wake-up interrupt in addition to the gpio irq
+        oneOf:
+          - items:
+              - enum: [ irq, wakeup ]
+          - items:
+              - const: irq
+              - const: wakeup
+
+      label:
+        description: Descriptive name of the key.
+
+      linux,code:
+        description: Key / Axis code to emit.
+
+      linux,input-type:
+        default: 1  # EV_KEY
+
+      linux,input-value:
+        description: |
+          If linux,input-type is EV_ABS or EV_REL then this
+          value is sent for events this button generates when pressed.
+          EV_ABS/EV_REL axis will generate an event with a value of 0
+          when all buttons with linux,input-type == type and
+          linux,code == axis are released. This value is interpreted
+          as a signed 32 bit value, e.g. to make a button generate a
+          value of -1 use:
+
+          linux,input-value = <0xffffffff>; /* -1 */
+
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      debounce-interval:
+        description:
+          Debouncing interval time in milliseconds. If not specified defaults to 5.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+        default: 5
+
+      wakeup-source:
+        description: Button can wake-up the system.
+
+      wakeup-event-action:
+        description: |
+          Specifies whether the key should wake the system when asserted, when
+          deasserted, or both. This property is only valid for keys that wake up the
+          system (e.g., when the "wakeup-source" property is also provided).
+
+          Supported values are defined in linux-event-codes.h:
+
+            EV_ACT_ANY        - both asserted and deasserted
+            EV_ACT_ASSERTED   - asserted
+            EV_ACT_DEASSERTED - deasserted
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+      linux,can-disable:
+        description:
+          Indicates that button is connected to dedicated (not shared) interrupt
+          which can be disabled to suppress events from the button.
+        type: boolean
+
+    required:
+      - linux,code
+
+    anyOf:
+      - required:
+          - interrupts
+      - required:
+          - interrupts-extended
+      - required:
+          - gpios
+
+    allOf:
+      - if:
+          properties:
+            interrupts:
+              minItems: 2
+          required:
             - interrupts
-        - required:
-            - gpios
-
-      dependencies:
-        wakeup-event-action: [ wakeup-source ]
-        linux,input-value: [ gpios ]
-
-      unevaluatedProperties: false
-
-if:
-  properties:
-    compatible:
-      const: gpio-keys-polled
-then:
-  properties:
-    poll-interval:
-      description:
-        Poll interval time in milliseconds
-      $ref: /schemas/types.yaml#/definitions/uint32
-
-  required:
-    - poll-interval
+        then:
+          properties:
+            interrupt-names:
+              minItems: 2
+          required:
+            - interrupt-names
+
+    dependencies:
+      wakeup-event-action: [ wakeup-source ]
+      linux,input-value: [ gpios ]
+
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: input.yaml#
+  - if:
+      properties:
+        compatible:
+          const: gpio-keys-polled
+    then:
+      required:
+        - poll-interval
+    else:
+      properties:
+        poll-interval: false
 
 additionalProperties: false
 
@@ -133,17 +156,26 @@ examples:
         compatible = "gpio-keys";
         autorepeat;
 
-        up {
+        key-up {
             label = "GPIO Key UP";
             linux,code = <103>;
             gpios = <&gpio1 0 1>;
         };
 
-        down {
+        key-down {
             label = "GPIO Key DOWN";
             linux,code = <108>;
             interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
         };
+
+        key-wakeup {
+            label = "GPIO Key WAKEUP";
+            linux,code = <143>;
+            interrupts-extended = <&intc 2 IRQ_TYPE_EDGE_FALLING>,
+                                  <&intc_wakeup 0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "irq", "wakeup";
+            wakeup-source;
+        };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
deleted file mode 100644
index 570dc10f0cd7..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* GPIO driven matrix keypad device tree bindings
-
-GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
-The matrix keypad supports multiple row and column lines, a key can be
-placed at each intersection of a unique row and a unique column. The matrix
-keypad can sense a key-press and key-release by means of GPIO lines and
-report the event using GPIO interrupts to the cpu.
-
-Required Properties:
-- compatible:		Should be "gpio-matrix-keypad"
-- row-gpios:		List of gpios used as row lines. The gpio specifier
-			for this property depends on the gpio controller to
-			which these row lines are connected.
-- col-gpios:		List of gpios used as column lines. The gpio specifier
-			for this property depends on the gpio controller to
-			which these column lines are connected.
-- linux,keymap:		The definition can be found at
-			bindings/input/matrix-keymap.txt
-
-Optional Properties:
-- linux,no-autorepeat:	do no enable autorepeat feature.
-- wakeup-source:	use any event on keypad as wakeup event.
-			(Legacy property supported: "linux,wakeup")
-- debounce-delay-ms:	debounce interval in milliseconds
-- col-scan-delay-us:	delay, measured in microseconds, that is needed
-			before we can scan keypad after activating column gpio
-- drive-inactive-cols:	drive inactive columns during scan,
-			default is to turn inactive columns into inputs.
-
-Example:
-	matrix-keypad {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio2 25 0
-			     &gpio2 26 0
-			     &gpio2 27 0>;
-
-		col-gpios = <&gpio2 21 0
-			     &gpio2 22 0>;
-
-		linux,keymap = <0x0000008B
-				0x0100009E
-				0x02000069
-				0x0001006A
-				0x0101001C
-				0x0201006C>;
-	};
diff --git a/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
new file mode 100644
index 000000000000..ebfff9e42a36
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-matrix-keypad.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/input/gpio-matrix-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO matrix keypad
+
+maintainers:
+  - Marek Vasut <marek.vasut@gmail.com>
+
+description:
+  GPIO driven matrix keypad is used to interface a SoC with a matrix keypad.
+  The matrix keypad supports multiple row and column lines, a key can be
+  placed at each intersection of a unique row and a unique column. The matrix
+  keypad can sense a key-press and key-release by means of GPIO lines and
+  report the event using GPIO interrupts to the cpu.
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+properties:
+  compatible:
+    const: gpio-matrix-keypad
+
+  row-gpios:
+    description:
+      List of GPIOs used as row lines. The gpio specifier for this property
+      depends on the gpio controller to which these row lines are connected.
+
+  col-gpios:
+    description:
+      List of GPIOs used as column lines. The gpio specifier for this property
+      depends on the gpio controller to which these column lines are connected.
+
+  linux,keymap: true
+
+  linux,no-autorepeat:
+    type: boolean
+    description: Do not enable autorepeat feature.
+
+  gpio-activelow:
+    type: boolean
+    description:
+      Force GPIO polarity to active low.
+      In the absence of this property GPIOs are treated as active high.
+
+  debounce-delay-ms:
+    description: Debounce interval in milliseconds.
+    default: 0
+
+  col-scan-delay-us:
+    description:
+      Delay, measured in microseconds, that is needed
+      before we can scan keypad after activating column gpio.
+    default: 0
+
+  all-cols-on-delay-us:
+    description:
+      Delay, measured in microseconds, that is needed
+      after activating all column gpios.
+    default: 0
+
+  drive-inactive-cols:
+    type: boolean
+    description:
+      Drive inactive columns during scan,
+      default is to turn inactive columns into inputs.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - row-gpios
+  - col-gpios
+  - linux,keymap
+
+additionalProperties: false
+
+examples:
+  - |
+    matrix-keypad {
+        compatible = "gpio-matrix-keypad";
+        debounce-delay-ms = <5>;
+        col-scan-delay-us = <2>;
+
+        row-gpios = <&gpio2 25 0
+                     &gpio2 26 0
+                     &gpio2 27 0>;
+
+        col-gpios = <&gpio2 21 0
+                     &gpio2 22 0>;
+
+        linux,keymap = <0x0000008B
+                        0x0100009E
+                        0x02000069
+                        0x0001006A
+                        0x0101001C
+                        0x0201006C>;
+
+        wakeup-source;
+    };
diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.txt b/Documentation/devicetree/bindings/input/gpio-mouse.txt
deleted file mode 100644
index 519510a11af9..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-mouse.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Device-Tree bindings for GPIO attached mice
-
-This simply uses standard GPIO handles to define a simple mouse connected
-to 5-7 GPIO lines.
-
-Required properties:
-	- compatible: must be "gpio-mouse"
-	- scan-interval-ms: The scanning interval in milliseconds
-	- up-gpios: GPIO line phandle to the line indicating "up"
-	- down-gpios: GPIO line phandle to the line indicating "down"
-	- left-gpios: GPIO line phandle to the line indicating "left"
-	- right-gpios: GPIO line phandle to the line indicating "right"
-
-Optional properties:
-	- button-left-gpios: GPIO line handle to the left mouse button
-	- button-middle-gpios: GPIO line handle to the middle mouse button
-	- button-right-gpios: GPIO line handle to the right mouse button
-Example:
-
-#include <dt-bindings/gpio/gpio.h>
-
-gpio-mouse {
-	compatible = "gpio-mouse";
-	scan-interval-ms = <50>;
-	up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-	down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-	left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-	right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-	button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-	button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-	button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-};
diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.yaml b/Documentation/devicetree/bindings/input/gpio-mouse.yaml
new file mode 100644
index 000000000000..3928ec6aff1d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-mouse.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-mouse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO attached mouse
+
+description: |
+  This simply uses standard GPIO handles to define a simple mouse connected
+  to 5-7 GPIO lines.
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    const: gpio-mouse
+
+  scan-interval-ms:
+    maxItems: 1
+
+  up-gpios:
+    maxItems: 1
+
+  down-gpios:
+    maxItems: 1
+
+  left-gpios:
+    maxItems: 1
+
+  right-gpios:
+    maxItems: 1
+
+  button-left-gpios:
+    maxItems: 1
+
+  button-middle-gpios:
+    maxItems: 1
+
+  button-right-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - scan-interval-ms
+  - up-gpios
+  - down-gpios
+  - left-gpios
+  - right-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpio-mouse {
+        compatible = "gpio-mouse";
+        scan-interval-ms = <50>;
+        up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+        down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+        left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+        right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+        button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+        button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+        button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
deleted file mode 100644
index c76bafaf98d2..000000000000
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* HID over I2C Device-Tree bindings
-
-HID over I2C provides support for various Human Interface Devices over the
-I2C bus. These devices can be for example touchpads, keyboards, touch screens
-or sensors.
-
-The specification has been written by Microsoft and is currently available here:
-http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
-
-If this binding is used, the kernel module i2c-hid will handle the communication
-with the device and the generic hid core layer will handle the protocol.
-
-Required properties:
-- compatible: must be "hid-over-i2c"
-- reg: i2c slave address
-- hid-descr-addr: HID descriptor address
-- interrupts: interrupt line
-
-Additional optional properties:
-
-Some devices may support additional optional properties to help with, e.g.,
-power sequencing. The following properties can be supported by one or more
-device-specific compatible properties, which should be used in addition to the
-"hid-over-i2c" string.
-
-- compatible:
-  * "wacom,w9013" (Wacom W9013 digitizer). Supports:
-    - vdd-supply (3.3V)
-    - vddl-supply (1.8V)
-    - post-power-on-delay-ms
-
-- vdd-supply: phandle of the regulator that provides the supply voltage.
-- post-power-on-delay-ms: time required by the device after enabling its regulators
-  or powering it on, before it is ready for communication.
-
-Example:
-
-	i2c-hid-dev@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
-		hid-descr-addr = <0x0020>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <3 2>;
-	};
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
new file mode 100644
index 000000000000..138caad96a29
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/hid-over-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HID over I2C Devices
+
+maintainers:
+  - Benjamin Tissoires <benjamin.tissoires@redhat.com>
+  - Jiri Kosina <jkosina@suse.cz>
+
+description: |+
+  HID over I2C provides support for various Human Interface Devices over the
+  I2C bus. These devices can be for example touchpads, keyboards, touch screens
+  or sensors.
+
+  The specification has been written by Microsoft and is currently available here:
+  https://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
+
+  If this binding is used, the kernel module i2c-hid will handle the communication
+  with the device and the generic hid core layer will handle the protocol.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - wacom,w9013
+          - const: hid-over-i2c
+      - description: Just "hid-over-i2c" alone is allowed, but not recommended.
+        const: hid-over-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  hid-descr-addr:
+    description: HID descriptor address
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  panel: true
+
+  post-power-on-delay-ms:
+    description: Time required by the device after enabling its regulators
+      or powering it on, before it is ready for communication.
+
+  touchscreen-inverted-x: true
+
+  touchscreen-inverted-y: true
+
+  vdd-supply:
+    description: 3.3V supply
+
+  vddl-supply:
+    description: 1.8V supply
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hid@2c {
+            compatible = "hid-over-i2c";
+            reg = <0x2c>;
+            hid-descr-addr = <0x0020>;
+            interrupts = <3 2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/ibm,op-panel.yaml b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
new file mode 100644
index 000000000000..29a1879e356d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ibm,op-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM Operation Panel
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  The IBM Operation Panel provides a simple interface to control the connected
+  server. It has a display and three buttons: two directional arrows and one
+  'Enter' button.
+
+properties:
+  compatible:
+    const: ibm,op-panel
+
+  reg:
+    maxItems: 1
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/i2c/i2c.h>
+    #include <dt-bindings/input/input.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ibm-op-panel@62 {
+            compatible = "ibm,op-panel";
+            reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+            linux,keycodes = <KEY_UP>, <KEY_DOWN>, <KEY_ENTER>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml
new file mode 100644
index 000000000000..1abeec768d79
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ilitek,ili2901.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ilitek,ili2901.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI2901 touchscreen controller
+
+maintainers:
+  - Jiri Kosina <jkosina@suse.com>
+
+description:
+  Supports the Ilitek ILI2901 touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ilitek,ili2901
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc33-supply: true
+
+  vccio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@41 {
+        compatible = "ilitek,ili2901";
+        reg = <0x41>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_ts>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
deleted file mode 100644
index cdcaa3f52d25..000000000000
--- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller
-
-Required properties:
-- compatible:
-    ilitek,ili210x for ILI210x
-    ilitek,ili2117 for ILI2117
-    ilitek,ili2120 for ILI2120
-    ilitek,ili251x for ILI251x
-
-- reg: The I2C address of the device
-
-- interrupts: The sink for the touchscreen's IRQ output
-    See ../interrupt-controller/interrupts.txt
-
-Optional properties for main touchpad device:
-
-- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
-
-Example:
-
-	touchscreen@41 {
-		compatible = "ilitek,ili251x";
-		reg = <0x41>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml
new file mode 100644
index 000000000000..c5d9e0e919f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ilitek,ili9882t.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ilitek,ili9882t.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ili9882t touchscreen controller
+
+maintainers:
+  - Cong Yang <yangcong5@huaqin.corp-partner.google.com>
+
+description:
+  Supports the Ilitek ili9882t touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    const: ilitek,ili9882t
+
+  reg:
+    const: 0x41
+
+  interrupts:
+    maxItems: 1
+
+  panel: true
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset GPIO.
+
+  vccio-supply:
+    description: The 1.8V supply to the touchscreen.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - panel
+  - vccio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen: touchscreen@41 {
+        compatible = "ilitek,ili9882t";
+        reg = <0x41>;
+
+        interrupt-parent = <&pio>;
+        interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+
+        panel = <&panel>;
+        reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+        vccio-supply = <&mt6366_vio18_reg>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/imx-keypad.yaml b/Documentation/devicetree/bindings/input/imx-keypad.yaml
index f21db81206b4..b110eb1f3358 100644
--- a/Documentation/devicetree/bindings/input/imx-keypad.yaml
+++ b/Documentation/devicetree/bindings/input/imx-keypad.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/input/imx-keypad.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX Keypad Port(KPP) device tree bindings
+title: Freescale i.MX Keypad Port(KPP)
 
 maintainers:
   - Liu Ying <gnuiyl@gmail.com>
 
 allOf:
-  - $ref: "/schemas/input/matrix-keymap.yaml#"
+  - $ref: /schemas/input/matrix-keymap.yaml#
 
 description: |
   The KPP is designed to interface with a keypad matrix with 2-point contact
diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
index d41d8743aad4..94f7942189e8 100644
--- a/Documentation/devicetree/bindings/input/input.yaml
+++ b/Documentation/devicetree/bindings/input/input.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/input.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common input schema binding
+title: Input Devices Common Properties
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
@@ -21,7 +21,26 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       minimum: 0
-      maximum: 0xff
+      maximum: 0x2ff
+
+  linux,code:
+    description:
+      Specifies a single numeric keycode value to be used for reporting
+      button/switch events. Specify KEY_RESERVED (0) to opt out of event
+      reporting.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0x2ff
+
+  linux,input-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1   # EV_KEY
+      - 2   # EV_REL
+      - 3   # EV_ABS
+      - 5   # EV_SW
+    description:
+      Specifies whether the event is to be interpreted as a key, relative,
+      absolute, or switch.
 
   poll-interval:
     description: Poll interval time in milliseconds.
@@ -39,4 +58,7 @@ properties:
       reset automatically. Device with key pressed reset feature can specify
       this property.
 
+dependencies:
+  linux,input-type: [ "linux,code" ]
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
index 9c154e5e1a91..2c3f693b8982 100644
--- a/Documentation/devicetree/bindings/input/iqs269a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -9,6 +9,9 @@ title: Azoteq IQS269A Capacitive Touch Controller
 maintainers:
   - Jeff LaBundy <jeff@labundy.com>
 
+allOf:
+  - $ref: input.yaml#
+
 description: |
   The Azoteq IQS269A is an 8-channel capacitive touch controller that features
   additional Hall-effect and inductive sensing capabilities.
@@ -17,7 +20,10 @@ description: |
 
 properties:
   compatible:
-    const: azoteq,iqs269a
+    enum:
+      - azoteq,iqs269a
+      - azoteq,iqs269a-00
+      - azoteq,iqs269a-d0
 
   reg:
     maxItems: 1
@@ -204,6 +210,73 @@ properties:
     default: 1
     description: Specifies the slider coordinate filter strength.
 
+  azoteq,touch-hold-ms:
+    multipleOf: 256
+    minimum: 256
+    maximum: 65280
+    default: 5120
+    description:
+      Specifies the length of time (in ms) for which the channel selected by
+      'azoteq,gpio3-select' must be held in a state of touch in order for an
+      approximately 60-ms pulse to be asserted on the GPIO4 pin.
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+    description: |
+      Specifies the numeric keycodes associated with each available gesture in
+      the following order (enter 0 for unused gestures):
+      0: Slider 0 tap
+      1: Slider 0 hold
+      2: Slider 0 positive flick or swipe
+      3: Slider 0 negative flick or swipe
+      4: Slider 1 tap
+      5: Slider 1 hold
+      6: Slider 1 positive flick or swipe
+      7: Slider 1 negative flick or swipe
+
+  azoteq,gesture-swipe:
+    type: boolean
+    description:
+      Directs the device to interpret axial gestures as a swipe (finger remains
+      on slider) instead of a flick (finger leaves slider).
+
+  azoteq,timeout-tap-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 400
+    description:
+      Specifies the length of time (in ms) within which a slider touch must be
+      released in order to be interpreted as a tap. Default and maximum values
+      as well as step size are reduced by a factor of 4 with device version 2.
+
+  azoteq,timeout-swipe-ms:
+    multipleOf: 16
+    minimum: 0
+    maximum: 4080
+    default: 2000
+    description:
+      Specifies the length of time (in ms) within which an axial gesture must be
+      completed in order to be interpreted as a flick or swipe. Default and max-
+      imum values as well as step size are reduced by a factor of 4 with device
+      version 2.
+
+  azoteq,thresh-swipe:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+    default: 128
+    description:
+      Specifies the number of points across which an axial gesture must travel
+      in order to be interpreted as a flick or swipe.
+
+dependencies:
+  azoteq,gesture-swipe: ["linux,keycodes"]
+  azoteq,timeout-tap-ms: ["linux,keycodes"]
+  azoteq,timeout-swipe-ms: ["linux,keycodes"]
+  azoteq,thresh-swipe: ["linux,keycodes"]
+
 patternProperties:
   "^channel@[0-7]$":
     type: object
@@ -370,6 +443,7 @@ patternProperties:
     patternProperties:
       "^event-prox(-alt)?$":
         type: object
+        $ref: input.yaml#
         description:
           Represents a proximity event reported by the channel in response to
           a decrease in counts. Node names suffixed with '-alt' instead corre-
@@ -396,14 +470,13 @@ patternProperties:
             default: 10
             description: Specifies the threshold for the event.
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
         additionalProperties: false
 
       "^event-touch(-alt)?$":
         type: object
+        $ref: input.yaml#
         description: Represents a touch event reported by the channel.
 
         properties:
@@ -421,14 +494,13 @@ patternProperties:
             default: 4
             description: Specifies the hysteresis for the event.
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
         additionalProperties: false
 
       "^event-deep(-alt)?$":
         type: object
+        $ref: input.yaml#
         description: Represents a deep-touch event reported by the channel.
 
         properties:
@@ -446,9 +518,7 @@ patternProperties:
             default: 0
             description: Specifies the hysteresis for the event.
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
         additionalProperties: false
 
@@ -457,6 +527,21 @@ patternProperties:
 
     additionalProperties: false
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - azoteq,iqs269a-d0
+then:
+  patternProperties:
+    "^channel@[0-7]$":
+      properties:
+        azoteq,slider1-select: false
+else:
+  properties:
+    azoteq,touch-hold-ms: false
+
 required:
   - compatible
   - reg
@@ -475,7 +560,7 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            iqs269a@44 {
+            touch@44 {
                     #address-cells = <1>;
                     #size-cells = <0>;
 
@@ -487,6 +572,14 @@ examples:
                     azoteq,hall-enable;
                     azoteq,suspend-mode = <2>;
 
+                    linux,keycodes = <KEY_PLAYPAUSE>,
+                                     <KEY_STOPCD>,
+                                     <KEY_NEXTSONG>,
+                                     <KEY_PREVIOUSSONG>;
+
+                    azoteq,timeout-tap-ms = <400>;
+                    azoteq,timeout-swipe-ms = <800>;
+
                     channel@0 {
                             reg = <0x0>;
 
diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
index 0cb736c541c9..e424d67b0542 100644
--- a/Documentation/devicetree/bindings/input/iqs626a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
@@ -449,6 +449,7 @@ patternProperties:
     patternProperties:
       "^event-(prox|touch|deep)(-alt)?$":
         type: object
+        $ref: input.yaml#
         description:
           Represents a proximity, touch or deep-touch event reported by the
           channel in response to a decrease in counts. Node names suffixed with
@@ -487,21 +488,15 @@ patternProperties:
               Specifies the hysteresis for the event (touch and deep-touch
               events only).
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
           linux,input-type:
-            $ref: /schemas/types.yaml#/definitions/uint32
             enum: [1, 5]
             description:
               Specifies whether the event is to be interpreted as a key (1) or
               a switch (5). By default, Hall-channel events are interpreted as
               switches and all others are interpreted as keys.
 
-        dependencies:
-          linux,input-type: ["linux,code"]
-
         additionalProperties: false
 
     dependencies:
@@ -511,6 +506,7 @@ patternProperties:
 
   "^trackpad-3x[2-3]$":
     type: object
+    $ref: input.yaml#
     description:
       Represents all channels associated with the trackpad. The channels are
       collectively active if the trackpad is defined and inactive otherwise.
@@ -568,16 +564,6 @@ patternProperties:
           2: Partial
           3: Full
 
-      azoteq,ati-base:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 6
-        maxItems: 9
-        items:
-          minimum: 45
-          maximum: 300
-        default: [45, 45, 45, 45, 45, 45, 45, 45, 45]
-        description: Specifies each individual trackpad channel's ATI base.
-
       azoteq,ati-target:
         $ref: /schemas/types.yaml#/definitions/uint32
         multipleOf: 32
@@ -624,17 +610,6 @@ patternProperties:
         description:
           Tightens the ATI band from 1/8 to 1/16 of the desired target.
 
-      azoteq,thresh:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 6
-        maxItems: 9
-        items:
-          minimum: 0
-          maximum: 255
-        default: [0, 0, 0, 0, 0, 0, 0, 0, 0]
-        description:
-          Specifies each individual trackpad channel's touch threshold.
-
       azoteq,hyst:
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
@@ -679,7 +654,6 @@ patternProperties:
           Specifies the raw count filter strength during low-power mode.
 
       linux,keycodes:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
         maxItems: 6
         description: |
@@ -725,6 +699,28 @@ patternProperties:
           Specifies the number of points across which an axial gesture must
           travel in order to be interpreted as a flick or swipe.
 
+    patternProperties:
+      "^channel-[0-8]$":
+        type: object
+        description: Represents a single trackpad channel.
+
+        properties:
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 0
+            description: Specifies the threshold for the channel.
+
+          azoteq,ati-base:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 45
+            maximum: 300
+            default: 45
+            description: Specifies the channel's ATI base.
+
+        additionalProperties: false
+
     dependencies:
       azoteq,gesture-swipe: ["linux,keycodes"]
       azoteq,timeout-tap-ms: ["linux,keycodes"]
@@ -751,7 +747,7 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            iqs626a@44 {
+            touch@44 {
                     #address-cells = <1>;
                     #size-cells = <0>;
 
@@ -785,14 +781,8 @@ examples:
                             azoteq,filt-str-lp-cnt = <1>;
 
                             azoteq,hyst = <4>;
-                            azoteq,thresh = <35>, <40>, <40>,
-                                            <38>, <33>, <38>,
-                                            <35>, <35>, <35>;
 
                             azoteq,ati-mode = <3>;
-                            azoteq,ati-base = <195>, <195>, <195>,
-                                              <195>, <195>, <195>,
-                                              <195>, <195>, <195>;
                             azoteq,ati-target = <512>;
 
                             azoteq,proj-bias = <1>;
@@ -809,6 +799,51 @@ examples:
                             azoteq,timeout-swipe-ms = <800>;
                             azoteq,timeout-tap-ms = <400>;
                             azoteq,thresh-swipe = <40>;
+
+                            channel-0 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-1 {
+                                    azoteq,thresh = <40>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-2 {
+                                    azoteq,thresh = <40>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-3 {
+                                    azoteq,thresh = <38>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-4 {
+                                    azoteq,thresh = <33>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-5 {
+                                    azoteq,thresh = <38>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-6 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-7 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-8 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
                     };
 
                     /*
diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
index 77fe3b545b35..0aa951f0ab92 100644
--- a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
+++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
@@ -9,6 +9,9 @@ title: Azoteq IQS620A/621/622/624/625 Keys and Switches
 maintainers:
   - Jeff LaBundy <jeff@labundy.com>
 
+allOf:
+  - $ref: input.yaml#
+
 description: |
   The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
   feature a variety of self-capacitive, mutual-inductive and Hall-effect sens-
@@ -30,7 +33,6 @@ properties:
       - azoteq,iqs625-keys
 
   linux,keycodes:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 16
     description: |
@@ -89,15 +91,14 @@ properties:
 patternProperties:
   "^hall-switch-(north|south)$":
     type: object
+    $ref: input.yaml#
     description:
       Represents north/south-field Hall-effect sensor touch or proximity
       events. Note that north/south-field orientation is reversed on the
       IQS620AXzCSR device due to its flip-chip package.
 
     properties:
-      linux,code:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Numeric switch code associated with the event.
+      linux,code: true
 
       azoteq,use-prox:
         $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/input/lpc32xx-key.txt b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
deleted file mode 100644
index 2b075a080d30..000000000000
--- a/Documentation/devicetree/bindings/input/lpc32xx-key.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-NXP LPC32xx Key Scan Interface
-
-This binding is based on the matrix-keymap binding with the following
-changes:
-
-Required Properties:
-- compatible: Should be "nxp,lpc3220-key"
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-- interrupts: The interrupt number to the cpu.
-- clocks: phandle to clock controller plus clock-specifier pair
-- nxp,debounce-delay-ms: Debounce delay in ms
-- nxp,scan-delay-ms: Repeated scan period in ms
-- linux,keymap: the key-code to be reported when the key is pressed
-  and released, see also
-  Documentation/devicetree/bindings/input/matrix-keymap.txt
-
-Note: keypad,num-rows and keypad,num-columns are required, and must be equal
-since LPC32xx only supports square matrices
-
-Example:
-
-	key@40050000 {
-		compatible = "nxp,lpc3220-key";
-		reg = <0x40050000 0x1000>;
-		clocks = <&clk LPC32XX_CLK_KEY>;
-		interrupt-parent = <&sic1>;
-		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-		keypad,num-rows = <1>;
-		keypad,num-columns = <1>;
-		nxp,debounce-delay-ms = <3>;
-		nxp,scan-delay-ms = <34>;
-		linux,keymap = <0x00000002>;
-	};
diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
index 6699d5e32dca..a715c2a773fe 100644
--- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml
+++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/matrix-keymap.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common key matrices binding for matrix-connected key boards
+title: Common Key Matrices on Matrix-connected Key Boards
 
 maintainers:
   - Olof Johansson <olof@lixom.net>
@@ -21,7 +21,7 @@ description: |
 
 properties:
   linux,keymap:
-    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       An array of packed 1-cell entries containing the equivalent of row,
       column and linux key-code. The 32-bit big endian cell is packed as:
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
index 3a2ad6ec64db..48edc0c8c1dd 100644
--- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
@@ -16,15 +16,15 @@ description: |
   The onkey controller is represented as a sub-node of the PMIC node on
   the device tree.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: maxim,max77650-onkey
 
   linux,code:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      The key-code to be reported when the key is pressed. Defaults
-      to KEY_POWER.
+    default: 116  # KEY_POWER
 
   maxim,onkey-slide:
     $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
new file mode 100644
index 000000000000..e365413732e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,mt6779-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek's Keypad Controller
+
+maintainers:
+  - Mattijs Korpershoek <mkorpershoek@kernel.org>
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+description: |
+  Mediatek's Keypad controller is used to interface a SoC with a matrix-type
+  keypad device. The keypad controller supports multiple row and column lines.
+  A key can be placed at each intersection of a unique row and a unique column.
+  The keypad controller can sense a key-press and key-release and report the
+  event using a interrupt to the cpu.
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6779-keypad
+      - items:
+          - enum:
+              - mediatek,mt6873-keypad
+              - mediatek,mt8183-keypad
+              - mediatek,mt8365-keypad
+              - mediatek,mt8516-keypad
+          - const: mediatek,mt6779-keypad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: kpd
+
+  wakeup-source:
+    description: use any event on keypad as wakeup event
+    type: boolean
+
+  debounce-delay-ms:
+    maximum: 256
+    default: 16
+
+  mediatek,keys-per-group:
+    description: each (row, column) group has multiple keys
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    maximum: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        keyboard@10010000 {
+          compatible = "mediatek,mt6779-keypad";
+          reg = <0 0x10010000 0 0x1000>;
+          interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_FALLING>;
+          clocks = <&clk26m>;
+          clock-names = "kpd";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
new file mode 100644
index 000000000000..b95435bd6a9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,pmic-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PMIC Keys
+
+maintainers:
+  - Chen Zhong <chen.zhong@mediatek.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  There are two key functions provided by MT6397, MT6323 and other MediaTek
+  PMICs: pwrkey and homekey.
+  The key functions are defined as the subnode of the function node provided
+  by the PMIC that is defined as a Multi-Function Device (MFD).
+
+  For MediaTek MT6323/MT6397 PMIC bindings see
+  Documentation/devicetree/bindings/mfd/mediatek,mt6397.yaml
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6323-keys
+      - mediatek,mt6328-keys
+      - mediatek,mt6331-keys
+      - mediatek,mt6357-keys
+      - mediatek,mt6358-keys
+      - mediatek,mt6359-keys
+      - mediatek,mt6397-keys
+
+  power-off-time-sec: true
+
+  mediatek,long-press-mode:
+    description: |
+      Key long-press force shutdown setting
+      0 - disabled
+      1 - pwrkey
+      2 - pwrkey+homekey
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    maximum: 2
+
+patternProperties:
+  "^((power|home)|(key-[a-z0-9-]+|[a-z0-9-]+-key))$":
+    $ref: input.yaml#
+
+    properties:
+      interrupts:
+        minItems: 1
+        items:
+          - description: Key press interrupt
+          - description: Key release interrupt
+
+      interrupt-names: true
+
+      linux,keycodes:
+        maxItems: 1
+
+      wakeup-source: true
+
+    required:
+      - linux,keycodes
+
+    if:
+      properties:
+        interrupt-names:
+          contains:
+            const: powerkey
+    then:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: powerkey
+            - const: powerkey_r
+    else:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: homekey
+            - const: homekey_r
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
index d5d6bced3148..7ade03f1b32b 100644
--- a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
+++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/input/microchip,cap11xx.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/input/microchip,cap11xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device tree bindings for Microchip CAP11xx based capacitive touch sensors
+title: Microchip CAP11xx based capacitive touch sensors
 
 description: |
   The Microchip CAP1xxx Family of RightTouchTM multiple-channel capacitive
@@ -19,7 +19,10 @@ properties:
       - microchip,cap1106
       - microchip,cap1126
       - microchip,cap1188
+      - microchip,cap1203
       - microchip,cap1206
+      - microchip,cap1293
+      - microchip,cap1298
 
   reg:
     maxItems: 1
@@ -42,13 +45,13 @@ properties:
       Enables the Linux input system's autorepeat feature on the input device.
 
   linux,keycodes:
-    minItems: 6
-    maxItems: 6
+    minItems: 3
+    maxItems: 8
     description: |
       Specifies an array of numeric keycode values to
       be used for the channels. If this property is
       omitted, KEY_A, KEY_B, etc are used as defaults.
-      The array must have exactly six entries.
+      The number of entries must correspond to the number of channels.
 
   microchip,sensor-gain:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -67,6 +70,59 @@ properties:
       open drain. This property allows using the active
       high push-pull output.
 
+  microchip,sensitivity-delta-sense:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+    description:
+      Controls the sensitivity multiplier of a touch detection.
+      Higher value means more sensitive settings.
+      At the more sensitive settings, touches are detected for a smaller delta
+      capacitance corresponding to a "lighter" touch.
+
+  microchip,signal-guard:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 8
+    items:
+      enum: [0, 1]
+    description: |
+      0 - off
+      1 - on
+      The signal guard isolates the signal from virtual grounds.
+      If enabled then the behavior of the channel is changed to signal guard.
+      The number of entries must correspond to the number of channels.
+
+  microchip,input-threshold:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 127
+    description:
+      Specifies the delta threshold that is used to determine if a touch has
+      been detected. A higher value means a larger difference in capacitance
+      is required for a touch to be registered, making the touch sensor less
+      sensitive.
+      The number of entries must correspond to the number of channels.
+
+  microchip,calib-sensitivity:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 8
+    items:
+      enum: [1, 2, 4]
+    description: |
+      Specifies an array of numeric values that controls the gain
+      used by the calibration routine to enable sensor inputs
+      to be more sensitive for proximity detection.
+      Gain is based on touch pad capacitance range
+      1 - 5-50pF
+      2 - 0-25pF
+      4 - 0-12.5pF
+      The number of entries must correspond to the number of channels.
+
 patternProperties:
   "^led@[0-7]$":
     type: object
@@ -96,10 +152,29 @@ allOf:
           contains:
             enum:
               - microchip,cap1106
+              - microchip,cap1203
+              - microchip,cap1206
+              - microchip,cap1293
+              - microchip,cap1298
     then:
       patternProperties:
         "^led@[0-7]$": false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,cap1106
+              - microchip,cap1126
+              - microchip,cap1188
+              - microchip,cap1203
+              - microchip,cap1206
+    then:
+      properties:
+        microchip,signal-guard: false
+        microchip,calib-sensitivity: false
+
 required:
   - compatible
   - interrupts
@@ -112,13 +187,15 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;
 
-      cap1188@28 {
+      touch@28 {
         compatible = "microchip,cap1188";
         interrupt-parent = <&gpio1>;
         interrupts = <0 0>;
         reg = <0x28>;
         autorepeat;
         microchip,sensor-gain = <2>;
+        microchip,sensitivity-delta-sense = <16>;
+        microchip,input-threshold = <21>, <18>, <46>, <46>, <46>, <21>;
 
         linux,keycodes = <103>,	/* KEY_UP */
                          <106>,	/* KEY_RIGHT */
diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
deleted file mode 100644
index 535d92885372..000000000000
--- a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-MediaTek MT6397/MT6323 PMIC Keys Device Driver
-
-There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
-and homekey. The key functions are defined as the subnode of the function
-node provided by MT6397/MT6323 PMIC that is being defined as one kind
-of Muti-Function Device (MFD)
-
-For MT6397/MT6323 MFD bindings see:
-Documentation/devicetree/bindings/mfd/mt6397.txt
-
-Required properties:
-- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
-- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml
-
-Optional Properties:
-- wakeup-source: See Documentation/devicetree/bindings/power/wakeup-source.txt
-- mediatek,long-press-mode: Long press key shutdown setting, 1 for
-	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
-- power-off-time-sec: See Documentation/devicetree/bindings/input/input.yaml
-
-Example:
-
-	pmic: mt6397 {
-		compatible = "mediatek,mt6397";
-
-		...
-
-		mt6397keys: mt6397keys {
-			compatible = "mediatek,mt6397-keys";
-			mediatek,long-press-mode = <1>;
-			power-off-time-sec = <0>;
-
-			power {
-				linux,keycodes = <116>;
-				wakeup-source;
-			};
-
-			home {
-				linux,keycodes = <114>;
-			};
-		};
-
-	};
diff --git a/Documentation/devicetree/bindings/input/nxp,lpc3220-key.yaml b/Documentation/devicetree/bindings/input/nxp,lpc3220-key.yaml
new file mode 100644
index 000000000000..9e0d977bdf5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/nxp,lpc3220-key.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/nxp,lpc3220-key.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx Key Scan Interface
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: nxp,lpc3220-key
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  nxp,debounce-delay-ms:
+    description: Debounce delay in ms
+
+  nxp,scan-delay-ms:
+    description: Repeated scan period in ms
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - nxp,debounce-delay-ms
+  - nxp,scan-delay-ms
+  - linux,keymap
+
+allOf:
+  - $ref: matrix-keymap.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/lpc32xx-clock.h>
+
+    key@40050000 {
+        compatible = "nxp,lpc3220-key";
+        reg = <0x40050000 0x1000>;
+        clocks = <&clk LPC32XX_CLK_KEY>;
+        interrupt-parent = <&sic1>;
+        interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+        keypad,num-rows = <1>;
+        keypad,num-columns = <1>;
+        nxp,debounce-delay-ms = <3>;
+        nxp,scan-delay-ms = <34>;
+        linux,keymap = <0x00000002>;
+    };
diff --git a/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
new file mode 100644
index 000000000000..490f6c3d9e4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pine64,pinephone-keyboard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pine64 PinePhone keyboard
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  A keyboard accessory is available for the Pine64 PinePhone and PinePhone Pro.
+  It connects via I2C, providing a raw scan matrix, a flashing interface, and a
+  subordinate I2C bus for communication with a battery charger IC.
+
+properties:
+  compatible:
+    const: pine64,pinephone-keyboard
+
+  reg:
+    const: 0x15
+
+  interrupts:
+    maxItems: 1
+
+  vbat-supply:
+    description: Supply for the keyboard MCU
+
+  wakeup-source: true
+
+  i2c:
+    $ref: /schemas/i2c/i2c-controller.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      keyboard@15 {
+        compatible = "pine64,pinephone-keyboard";
+        reg = <0x15>;
+        interrupt-parent = <&r_pio>;
+        interrupts = <0 12 IRQ_TYPE_EDGE_FALLING>; /* PL12 */
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          charger@75 {
+            reg = <0x75>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
deleted file mode 100644
index 8fc0e48c20db..000000000000
--- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* PWM beeper device tree bindings
-
-Registers a PWM device as beeper.
-
-Required properties:
-- compatible: should be "pwm-beeper"
-- pwms: phandle to the physical PWM device
-
-Optional properties:
-- amp-supply: phandle to a regulator that acts as an amplifier for the beeper
-- beeper-hz:  bell frequency in Hz
-
-Example:
-
-beeper_amp: amplifier {
-	compatible = "fixed-regulator";
-	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-};
-
-beeper {
-	compatible = "pwm-beeper";
-	pwms = <&pwm0>;
-	amp-supply = <&beeper_amp>;
-};
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.yaml b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
new file mode 100644
index 000000000000..a7611c206989
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pwm-beeper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM beeper
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    const: pwm-beeper
+
+  pwms:
+    maxItems: 1
+
+  amp-supply:
+    description: an amplifier for the beeper
+
+  beeper-hz:
+    description: bell frequency in Hz
+    minimum: 10
+    maximum: 10000
+
+required:
+  - compatible
+  - pwms
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    beeper {
+        compatible = "pwm-beeper";
+        pwms = <&pwm0>;
+        amp-supply = <&beeper_amp>;
+        beeper-hz = <1000>;
+    };
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
deleted file mode 100644
index 88c775a3fe21..000000000000
--- a/Documentation/devicetree/bindings/input/pwm-vibrator.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* PWM vibrator device tree bindings
-
-Registers a PWM device as vibrator. It is expected, that the vibrator's
-strength increases based on the duty cycle of the enable PWM channel
-(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
-
-The binding supports an optional direction PWM channel, that can be
-driven at fixed duty cycle. If available this is can be used to increase
-the vibration effect of some devices.
-
-Required properties:
-- compatible: should contain "pwm-vibrator"
-- pwm-names: Should contain "enable" and optionally "direction"
-- pwms: Should contain a PWM handle for each entry in pwm-names
-
-Optional properties:
-- vcc-supply: Phandle for the regulator supplying power
-- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
-                           nanoseconds, defaults to 50% of the channel's
-			   period.
-
-Example from Motorola Droid 4:
-
-&omap4_pmx_core {
-	vibrator_direction_pin: pinmux_vibrator_direction_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: pinmux_vibrator_enable_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
-};
-
-/ {
-	pwm8: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 1000000000 0>,
-                       <&pwm8 0 1000000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <1000000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
new file mode 100644
index 000000000000..6398534b43c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pwm-vibrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM vibrator
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  Registers a PWM device as vibrator. It is expected, that the vibrator's
+  strength increases based on the duty cycle of the enable PWM channel
+  (100% duty cycle meaning strongest vibration, 0% meaning no vibration).
+
+  The binding supports an optional direction PWM channel, that can be
+  driven at fixed duty cycle. If available this is can be used to increase
+  the vibration effect of some devices.
+
+properties:
+  compatible:
+    const: pwm-vibrator
+
+  pwm-names:
+    items:
+      - const: enable
+      - const: direction
+    minItems: 1
+
+  pwms:
+    minItems: 1
+    maxItems: 2
+
+  enable-gpios: true
+
+  vcc-supply: true
+
+  direction-duty-cycle-ns:
+    description: >
+      Duty cycle of the direction PWM channel in nanoseconds,
+      defaults to 50% of the channel's period.
+
+required:
+  - compatible
+  - pwm-names
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    vibrator {
+        compatible = "pwm-vibrator";
+        pwms = <&pwm9 0 1000000000 0>,
+               <&pwm8 0 1000000000 0>;
+        pwm-names = "enable", "direction";
+        direction-duty-cycle-ns = <1000000000>;
+    };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
new file mode 100644
index 000000000000..e03611eef93d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-keypad.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8921-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8921 PMIC KeyPad
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+allOf:
+  - $ref: input.yaml#
+  - $ref: matrix-keymap.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058-keypad
+      - qcom,pm8921-keypad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: key sense
+      - description: key stuck
+
+  wakeup-source:
+    type: boolean
+    description: use any event on keypad as wakeup event
+
+  linux,keypad-wakeup:
+    type: boolean
+    deprecated: true
+    description: legacy version of the wakeup-source property
+
+  debounce:
+    description:
+      Time in microseconds that key must be pressed or
+      released for state change interrupt to trigger.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  scan-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: time in microseconds to pause between successive scans of the
+      matrix array
+
+  row-hold:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: time in nanoseconds to pause between scans of each row in the
+      matrix array.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        keypad@148 {
+            compatible = "qcom,pm8921-keypad";
+            reg = <0x148>;
+            interrupt-parent = <&pmicintc>;
+            interrupts = <74 IRQ_TYPE_EDGE_RISING>, <75 IRQ_TYPE_EDGE_RISING>;
+            linux,keymap = <
+                MATRIX_KEY(0, 0, KEY_VOLUMEUP)
+                MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
+                MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
+                MATRIX_KEY(0, 3, KEY_CAMERA)
+            >;
+            keypad,num-rows = <1>;
+            keypad,num-columns = <5>;
+            debounce = <15>;
+            scan-delay = <32>;
+            row-hold = <91500>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
new file mode 100644
index 000000000000..64590894857a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8921-pwrkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8921 PMIC Power Key
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pm8921-pwrkey
+          - qcom,pm8058-pwrkey
+      - items:
+          - enum:
+              - qcom,pm8018-pwrkey
+          - const: qcom,pm8921-pwrkey
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: key release
+      - description: key press
+
+  debounce:
+    description:
+      Time in microseconds that key must be pressed or
+      released for state change interrupt to trigger.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  pull-up:
+    description:
+      Presence of this property indicates that the KPDPWR_N
+      pin should be configured for pull up.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ssbi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@0 {
+            reg = <0x0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pwrkey@1c {
+                compatible = "qcom,pm8921-pwrkey";
+                reg = <0x1c>;
+                interrupt-parent = <&pmicint>;
+                interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
+                debounce = <15625>;
+                pull-up;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml
index 62314a5fdce5..f978cf965a4d 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml
@@ -10,9 +10,6 @@ maintainers:
   - Courtney Cavin <courtney.cavin@sonymobile.com>
   - Vinod Koul <vkoul@kernel.org>
 
-allOf:
-  - $ref: input.yaml#
-
 properties:
   compatible:
     enum:
@@ -25,23 +22,40 @@ properties:
     maxItems: 1
 
   debounce:
-    description: |
-          Time in microseconds that key must be pressed or
-          released for state change interrupt to trigger.
+    description:
+      Time in microseconds that key must be pressed or released for state
+      change interrupt to trigger.
     $ref: /schemas/types.yaml#/definitions/uint32
 
   bias-pull-up:
-    description: |
-           Presence of this property indicates that the KPDPWR_N
-           pin should be configured for pull up.
+    description:
+      Presence of this property indicates that the KPDPWR_N pin should be
+      configured for pull up.
     $ref: /schemas/types.yaml#/definitions/flag
 
+  wakeup-source:
+    description:
+      Button can wake-up the system.  Only applicable for 'resin', 'pwrkey'
+      always wakes the system by default.
+
   linux,code:
-    description: |
-           The input key-code associated with the power key.
-           Use the linux event codes defined in
-           include/dt-bindings/input/linux-event-codes.h
-           When property is omitted KEY_POWER is assumed.
+    description:
+      The input key-code associated with the power key.  Use the linux event
+      codes defined in include/dt-bindings/input/linux-event-codes.h.
+      When property is omitted KEY_POWER is assumed.
+
+allOf:
+  - $ref: input.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8941-pwrkey
+              - qcom,pmk8350-pwrkey
+    then:
+      properties:
+        wakeup-source: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
deleted file mode 100644
index 4a9dc6ba96b1..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-Qualcomm PM8xxx PMIC Keypad
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058-keypad"
-		    "qcom,pm8921-keypad"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: address of keypad control register
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the first interrupt specifies the key sense interrupt
-		    and the second interrupt specifies the key stuck interrupt.
-		    The format of the specifier is defined by the binding
-		    document describing the node's interrupt parent.
-
-- linux,keymap:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the linux keymap. More information can be found in
-		    input/matrix-keymap.txt.
-
-- linux,keypad-no-autorepeat:
-	Usage: optional
-	Value type: <bool>
-	Definition: don't enable autorepeat feature.
-
-- wakeup-source:
-	Usage: optional
-	Value type: <bool>
-	Definition: use any event on keypad as wakeup event.
-		    (Legacy property supported: "linux,keypad-wakeup")
-
-- keypad,num-rows:
-	Usage: required
-	Value type: <u32>
-	Definition: number of rows in the keymap. More information can be found
-		    in input/matrix-keymap.txt.
-
-- keypad,num-columns:
-	Usage: required
-	Value type: <u32>
-	Definition: number of columns in the keymap. More information can be
-		    found in input/matrix-keymap.txt.
-
-- debounce:
-	Usage: optional
-	Value type: <u32>
-	Definition: time in microseconds that key must be pressed or release
-		    for key sense interrupt to trigger.
-
-- scan-delay:
-	Usage: optional
-	Value type: <u32>
-	Definition: time in microseconds to pause between successive scans
-		    of the matrix array.
-
-- row-hold:
-	Usage: optional
-	Value type: <u32>
-	Definition: time in nanoseconds to pause between scans of each row in
-		    the matrix array.
-
-EXAMPLE
-
-	keypad@148 {
-		compatible = "qcom,pm8921-keypad";
-		reg = <0x148>;
-		interrupt-parent = <&pmicintc>;
-		interrupts = <74 1>, <75 1>;
-		linux,keymap = <
-			MATRIX_KEY(0, 0, KEY_VOLUMEUP)
-			MATRIX_KEY(0, 1, KEY_VOLUMEDOWN)
-			MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS)
-			MATRIX_KEY(0, 3, KEY_CAMERA)
-			>;
-		keypad,num-rows = <1>;
-		keypad,num-columns = <5>;
-		debounce = <15>;
-		scan-delay = <32>;
-		row-hold = <91500>;
-	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
deleted file mode 100644
index 588536cc96ed..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Qualcomm PM8xxx PMIC Power Key
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058-pwrkey"
-		    "qcom,pm8921-pwrkey"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: address of power key control register
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the first interrupt specifies the key release interrupt
-		    and the second interrupt specifies the key press interrupt.
-		    The format of the specifier is defined by the binding
-		    document describing the node's interrupt parent.
-
-- debounce:
-	Usage: optional
-	Value type: <u32>
-	Definition: time in microseconds that key must be pressed or release
-		    for state change interrupt to trigger.
-
-- pull-up:
-	Usage: optional
-	Value type: <empty>
-	Definition: presence of this property indicates that the KPDPWR_N pin
-		    should be configured for pull up.
-
-EXAMPLE
-
-	pwrkey@1c {
-		compatible = "qcom,pm8921-pwrkey";
-		reg = <0x1c>;
-		interrupt-parent = <&pmicintc>;
-		interrupts = <50 1>, <51 1>;
-		debounce = <15625>;
-		pull-up;
-	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt
deleted file mode 100644
index 64bb990075c3..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Qualcomm PM8xxx PMIC Vibrator
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058-vib"
-		    "qcom,pm8916-vib"
-		    "qcom,pm8921-vib"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: address of vibration control register
-
-EXAMPLE
-
-	vibrator@4a {
-		compatible = "qcom,pm8058-vib";
-		reg = <0x4a>;
-	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
new file mode 100644
index 000000000000..76a286ec5959
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8xxx-vib.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC Vibrator
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pm8058-vib
+          - qcom,pm8916-vib
+          - qcom,pm8921-vib
+          - qcom,pmi632-vib
+      - items:
+          - enum:
+              - qcom,pm6150-vib
+              - qcom,pm7250b-vib
+              - qcom,pm7325b-vib
+              - qcom,pm7550ba-vib
+          - const: qcom,pmi632-vib
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vibrator@4a {
+            compatible = "qcom,pm8058-vib";
+            reg = <0x4a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.yaml b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
index b1ae72f9cd2d..cf63f834dd7d 100644
--- a/Documentation/devicetree/bindings/input/regulator-haptic.yaml
+++ b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/input/regulator-haptic.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/input/regulator-haptic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Regulator Haptic Device Tree Bindings
+title: Regulator Haptic
 
 maintainers:
   - Jaewon Kim <jaewon02.kim@samsung.com>
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
deleted file mode 100644
index 9afffbdf6e28..000000000000
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Synaptics RMI4 2D Sensor Device Binding
-
-The Synaptics RMI4 core is able to support RMI4 devices using different
-transports and different functions. This file describes the device tree
-bindings for devices which contain 2D sensors using Function 11 or
-Function 12. Complete documentation for transports and other functions
-can be found in:
-Documentation/devicetree/bindings/input/rmi4.
-
-RMI4 Function 11 and Function 12 are for 2D touch position sensing.
-Additional documentation for F11 can be found at:
-http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
-
-Optional Touch Properties:
-Description in Documentation/devicetree/bindings/input/touchscreen
-- touchscreen-inverted-x
-- touchscreen-inverted-y
-- touchscreen-swapped-x-y
-- touchscreen-x-mm
-- touchscreen-y-mm
-
-Optional Properties:
-- syna,clip-x-low: Sets a minimum value for X.
-- syna,clip-y-low: Sets a minimum value for Y.
-- syna,clip-x-high: Sets a maximum value for X.
-- syna,clip-y-high: Sets a maximum value for Y.
-- syna,offset-x: Add an offset to X.
-- syna,offset-y: Add an offset to Y.
-- syna,delta-x-threshold: Set the minimum distance on the X axis required
-				to generate an interrupt in reduced reporting
-				mode.
-- syna,delta-y-threshold: Set the minimum distance on the Y axis required
-				to generate an interrupt in reduced reporting
-				mode.
-- syna,sensor-type: Set the sensor type. 1 for touchscreen 2 for touchpad.
-- syna,disable-report-mask: Mask for disabling posiiton reporting. Used to
-				disable reporing absolute position data.
-- syna,rezero-wait-ms: Time in miliseconds to wait after issuing a rezero
-				command.
-
-
-Example of a RMI4 I2C device with F11:
-Example:
-	&i2c1 {
-		rmi4-i2c-dev@2c {
-			compatible = "syna,rmi4-i2c";
-
-			...
-
-			rmi4-f11@11 {
-				reg = <0x11>;
-				touchscreen-inverted-y;
-				syna,sensor-type = <2>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
deleted file mode 100644
index 079cad2b6843..000000000000
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Synaptics RMI4 F01 Device Binding
-
-The Synaptics RMI4 core is able to support RMI4 devices using different
-transports and different functions. This file describes the device tree
-bindings for devices which contain Function 1. Complete documentation
-for transports and other functions can be found in:
-Documentation/devicetree/bindings/input/rmi4.
-
-Additional documentation for F01 can be found at:
-http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
-
-Optional Properties:
-- syna,nosleep-mode: If set the device will run at full power without sleeping.
-			nosleep has 3 modes, 0 will not change the default
-			setting, 1 will disable nosleep (allow sleeping),
-			and 2 will enable nosleep (disabling sleep).
-- syna,wakeup-threshold: Defines the amplitude of the disturbance to the
-				background capacitance that will cause the
-				device to wake from dozing.
-- syna,doze-holdoff-ms: The delay to wait after the last finger lift and the
-				first doze cycle.
-- syna,doze-interval-ms: The time period that the device sleeps between finger
-				activity.
-
-
-Example of a RMI4 I2C device with F01:
-	Example:
-	&i2c1 {
-		rmi4-i2c-dev@2c {
-			compatible = "syna,rmi4-i2c";
-
-			...
-
-			rmi4-f01@1 {
-				reg = <0x1>;
-				syna,nosleep-mode = <1>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
deleted file mode 100644
index dcb012f5b3ee..000000000000
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Synaptics RMI4 I2C Device Binding
-
-The Synaptics RMI4 core is able to support RMI4 devices using different
-transports and different functions. This file describes the device tree
-bindings for devices using the I2C transport driver. Complete documentation
-for other transports and functions can be found in
-Documentation/devicetree/bindings/input/rmi4.
-
-Required Properties:
-- compatible: syna,rmi4-i2c
-- reg: I2C address
-- #address-cells: Set to 1 to indicate that the function child nodes
-		    consist of only on uint32 value.
-- #size-cells: Set to 0 to indicate that the function child nodes do not
-		have a size property.
-
-Optional Properties:
-- interrupts: interrupt which the rmi device is connected to.
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-- syna,reset-delay-ms: The number of milliseconds to wait after resetting the
-			device.
-
-- syna,startup-delay-ms: The number of milliseconds to wait after powering on
-			 the device.
-
-- vdd-supply: VDD power supply.
-See ../regulator/regulator.txt
-
-- vio-supply: VIO power supply
-See ../regulator/regulator.txt
-
-Function Parameters:
-Parameters specific to RMI functions are contained in child nodes of the rmi device
- node. Documentation for the parameters of each function can be found in:
-Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt.
-
-
-
-Example:
-	&i2c1 {
-		rmi4-i2c-dev@2c {
-			compatible = "syna,rmi4-i2c";
-			reg = <0x2c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&gpio>;
-			interrupts = <4 2>;
-
-			rmi4-f01@1 {
-				reg = <0x1>;
-				syna,nosleep-mode = <1>;
-			};
-
-			rmi4-f11@11 {
-				reg = <0x11>;
-				touchscreen-inverted-y;
-				syna,sensor-type = <2>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
deleted file mode 100644
index 632f473db65b..000000000000
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Synaptics RMI4 SPI Device Binding
-
-The Synaptics RMI4 core is able to support RMI4 devices using different
-transports and different functions. This file describes the device tree
-bindings for devices using the SPI transport driver. Complete documentation
-for other transports and functions can be found in
-Documentation/devicetree/bindings/input/rmi4.
-
-Required Properties:
-- compatible: syna,rmi4-spi
-- reg: Chip select address for the device
-- #address-cells: Set to 1 to indicate that the function child nodes
-		    consist of only on uint32 value.
-- #size-cells: Set to 0 to indicate that the function child nodes do not
-		have a size property.
-
-Optional Properties:
-- interrupts: interrupt which the rmi device is connected to.
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-- spi-rx-delay-us: microsecond delay after a read transfer.
-- spi-tx-delay-us: microsecond delay after a write transfer.
-
-Function Parameters:
-Parameters specific to RMI functions are contained in child nodes of the rmi device
- node. Documentation for the parameters of each function can be found in:
-Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt.
-
-
-
-Example:
-	spi@7000d800 {
-		rmi4-spi-dev@0 {
-			compatible = "syna,rmi4-spi";
-			reg = <0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			spi-max-frequency = <4000000>;
-			spi-cpha;
-			spi-cpol;
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(K, 2) 0x2>;
-			spi-rx-delay-us = <30>;
-
-			rmi4-f01@1 {
-				reg = <0x1>;
-				syna,nosleep-mode = <1>;
-			};
-
-			rmi4-f11@11 {
-				reg = <0x11>;
-				touchscreen-inverted-y;
-				syna,sensor-type = <2>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt
deleted file mode 100644
index a644408b33b8..000000000000
--- a/Documentation/devicetree/bindings/input/rotary-encoder.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Rotary encoder DT bindings
-
-Required properties:
-- gpios: a spec for at least two GPIOs to be used, most significant first
-
-Optional properties:
-- linux,axis: the input subsystem axis to map to this rotary encoder.
-  Defaults to 0 (ABS_X / REL_X)
-- rotary-encoder,steps: Number of steps in a full turnaround of the
-  encoder. Only relevant for absolute axis. Defaults to 24 which is a
-  typical value for such devices.
-- rotary-encoder,relative-axis: register a relative axis rather than an
-  absolute one. Relative axis will only generate +1/-1 events on the input
-  device, hence no steps need to be passed.
-- rotary-encoder,rollover: Automatic rollover when the rotary value becomes
-  greater than the specified steps or smaller than 0. For absolute axis only.
-- rotary-encoder,steps-per-period: Number of steps (stable states) per period.
-  The values have the following meaning:
-  1: Full-period mode (default)
-  2: Half-period mode
-  4: Quarter-period mode
-- wakeup-source: Boolean, rotary encoder can wake up the system.
-- rotary-encoder,encoding: String, the method used to encode steps.
-  Supported are "gray" (the default and more common) and "binary".
-
-Deprecated properties:
-- rotary-encoder,half-period: Makes the driver work on half-period mode.
-  This property is deprecated. Instead, a 'steps-per-period ' value should
-  be used, such as "rotary-encoder,steps-per-period = <2>".
-
-See Documentation/input/devices/rotary-encoder.rst for more information.
-
-Example:
-
-		rotary@0 {
-			compatible = "rotary-encoder";
-			gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */
-			linux,axis = <0>; /* REL_X */
-			rotary-encoder,encoding = "gray";
-			rotary-encoder,relative-axis;
-		};
-
-		rotary@1 {
-			compatible = "rotary-encoder";
-			gpios = <&gpio 21 0>, <&gpio 22 0>;
-			linux,axis = <1>; /* ABS_Y */
-			rotary-encoder,steps = <24>;
-			rotary-encoder,encoding = "binary";
-			rotary-encoder,rollover;
-		};
diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.yaml b/Documentation/devicetree/bindings/input/rotary-encoder.yaml
new file mode 100644
index 000000000000..f9332bb2343f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/rotary-encoder.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/rotary-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rotary encoder
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  See Documentation/input/devices/rotary-encoder.rst for more information.
+
+properties:
+  compatible:
+    const: rotary-encoder
+
+  gpios:
+    minItems: 2
+
+  linux,axis:
+    default: 0
+    description:
+      the input subsystem axis to map to this rotary encoder.
+      Defaults to 0 (ABS_X / REL_X)
+
+  rotary-encoder,steps:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 24
+    description:
+      Number of steps in a full turnaround of the
+      encoder. Only relevant for absolute axis. Defaults to 24 which is a
+      typical value for such devices.
+
+  rotary-encoder,relative-axis:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      register a relative axis rather than an
+      absolute one. Relative axis will only generate +1/-1 events on the input
+      device, hence no steps need to be passed.
+
+  rotary-encoder,rollover:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Automatic rollover when the rotary value becomes
+      greater than the specified steps or smaller than 0. For absolute axis only.
+
+  rotary-encoder,steps-per-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    enum: [1, 2, 4]
+    description: |
+      Number of steps (stable states) per period.
+      The values have the following meaning:
+      1: Full-period mode (default)
+      2: Half-period mode
+      4: Quarter-period mode
+
+  wakeup-source: true
+
+  rotary-encoder,encoding:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: the method used to encode steps.
+    enum: [gray, binary]
+
+  rotary-encoder,half-period:
+    $ref: /schemas/types.yaml#/definitions/flag
+    deprecated: true
+    description:
+      Makes the driver work on half-period mode.
+      This property is deprecated. Instead, a 'steps-per-period ' value should
+      be used, such as "rotary-encoder,steps-per-period = <2>".
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    rotary {
+        compatible = "rotary-encoder";
+        gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */
+        linux,axis = <0>; /* REL_X */
+        rotary-encoder,encoding = "gray";
+        rotary-encoder,relative-axis;
+    };
+
diff --git a/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml b/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml
new file mode 100644
index 000000000000..a53569aa0ee7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/samsung,s3c6410-keypad.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/samsung,s3c6410-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series Keypad Controller
+
+description:
+  Samsung SoC Keypad controller is used to interface a SoC with a matrix-type
+  keypad device. The keypad controller supports multiple row and column lines.
+  A key can be placed at each intersection of a unique row and a unique column.
+  The keypad controller can sense a key-press and key-release and report the
+  event using a interrupt to the cpu.
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6410-keypad
+      - samsung,s5pv210-keypad
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: keypad
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  linux,input-no-autorepeat:
+    type: boolean
+    description:
+      Do no enable autorepeat feature.
+
+  linux,input-wakeup:
+    type: boolean
+    deprecated: true
+
+  samsung,keypad-num-columns:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of column lines connected to the keypad controller.
+
+  samsung,keypad-num-rows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of row lines connected to the keypad controller.
+
+patternProperties:
+  '^key-[0-9a-z]+$':
+    type: object
+    $ref: input.yaml#
+    additionalProperties: false
+    description:
+      Each key connected to the keypad controller is represented as a child
+      node to the keypad controller device node.
+
+    properties:
+      keypad,column:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: The column number to which the key is connected.
+
+      keypad,row:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: The row number to which the key is connected.
+
+      linux,code: true
+
+    required:
+      - keypad,column
+      - keypad,row
+      - linux,code
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - samsung,keypad-num-columns
+  - samsung,keypad-num-rows
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    keypad@100a0000 {
+        compatible = "samsung,s5pv210-keypad";
+        reg = <0x100a0000 0x100>;
+        interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_KEYIF>;
+        clock-names = "keypad";
+
+        samsung,keypad-num-rows = <2>;
+        samsung,keypad-num-columns = <8>;
+        linux,input-no-autorepeat;
+        wakeup-source;
+
+        key-1 {
+            keypad,row = <0>;
+            keypad,column = <3>;
+            linux,code = <2>;
+        };
+
+        key-2 {
+            keypad,row = <0>;
+            keypad,column = <4>;
+            linux,code = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
deleted file mode 100644
index 4c5c0a82586d..000000000000
--- a/Documentation/devicetree/bindings/input/samsung-keypad.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Samsung's Keypad Controller device tree bindings
-
-Samsung's Keypad controller is used to interface a SoC with a matrix-type
-keypad device. The keypad controller supports multiple row and column lines.
-A key can be placed at each intersection of a unique row and a unique column.
-The keypad controller can sense a key-press and key-release and report the
-event using a interrupt to the cpu.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
-  - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad
-    controller.
-  - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad
-    controller.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- interrupts: The interrupt number to the cpu.
-
-Required Board Specific Properties:
-- samsung,keypad-num-rows: Number of row lines connected to the keypad
-  controller.
-
-- samsung,keypad-num-columns: Number of column lines connected to the
-  keypad controller.
-
-- Keys represented as child nodes: Each key connected to the keypad
-  controller is represented as a child node to the keypad controller
-  device node and should include the following properties.
-  - keypad,row: the row number to which the key is connected.
-  - keypad,column: the column number to which the key is connected.
-  - linux,code: the key-code to be reported when the key is pressed
-    and released.
-
-- pinctrl-0: Should specify pin control groups used for this controller.
-- pinctrl-names: Should contain only one value - "default".
-
-Optional Properties:
-- wakeup-source: use any event on keypad as wakeup event.
-		 (Legacy property supported: "linux,input-wakeup")
-
-Optional Properties specific to linux:
-- linux,keypad-no-autorepeat: do no enable autorepeat feature.
-
-
-Example:
-	keypad@100a0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <173>;
-		samsung,keypad-num-rows = <2>;
-		samsung,keypad-num-columns = <8>;
-		linux,input-no-autorepeat;
-		wakeup-source;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&keypad_rows &keypad_columns>;
-
-		key_1 {
-			keypad,row = <0>;
-			keypad,column = <3>;
-			linux,code = <2>;
-		};
-
-		key_2 {
-			keypad,row = <0>;
-			keypad,column = <4>;
-			linux,code = <3>;
-		};
-
-		key_3 {
-			keypad,row = <0>;
-			keypad,column = <5>;
-			linux,code = <4>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
deleted file mode 100644
index 70c14250323b..000000000000
--- a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
+++ /dev/null
@@ -1 +0,0 @@
-See Documentation/devicetree/bindings/crypto/fsl-sec4.txt
diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
index 5d67fc8ebc18..4c8d303ff93c 100644
--- a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/input/sprd,sc27xx-vibrator.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Spreadtrum SC27xx PMIC Vibrator Device Tree Bindings
+title: Spreadtrum SC27xx PMIC Vibrator
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
@@ -28,21 +28,4 @@ required:
 
 additionalProperties: false
 
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    sc2731_pmic: pmic@0 {
-      compatible = "sprd,sc2731";
-      reg = <0 0>;
-      spi-max-frequency = <26000000>;
-      interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-      interrupt-controller;
-      #interrupt-cells = <2>;
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      vibrator@eb4 {
-        compatible = "sprd,sc2731-vibrator";
-        reg = <0xeb4>;
-      };
-    };
+...
diff --git a/Documentation/devicetree/bindings/input/stmpe-keypad.txt b/Documentation/devicetree/bindings/input/stmpe-keypad.txt
deleted file mode 100644
index 12bb771d66d4..000000000000
--- a/Documentation/devicetree/bindings/input/stmpe-keypad.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* STMPE Keypad
-
-Required properties:
- - compatible               : "st,stmpe-keypad"
- - linux,keymap             : See ./matrix-keymap.txt
-
-Optional properties:
- - debounce-interval        : Debouncing interval time in milliseconds
- - st,scan-count            : Scanning cycles elapsed before key data is updated
- - st,no-autorepeat         : If specified device will not autorepeat
- - keypad,num-rows          : See ./matrix-keymap.txt
- - keypad,num-columns       : See ./matrix-keymap.txt
-
-Example:
-
-	stmpe_keypad {
-		compatible = "st,stmpe-keypad";
-
-		debounce-interval = <64>;
-		st,scan-count = <8>;
-		st,no-autorepeat;
-
-		linux,keymap = <0x205006b
-				0x4010074
-				0x3050072
-				0x1030004
-				0x502006a
-				0x500000a
-				0x5008b
-				0x706001c
-				0x405000b
-				0x6070003
-				0x3040067
-				0x303006c
-				0x60400e7
-				0x602009e
-				0x4020073
-				0x5050002
-				0x4030069
-				0x3020008>;
-	};
diff --git a/Documentation/devicetree/bindings/input/syna,rmi4.yaml b/Documentation/devicetree/bindings/input/syna,rmi4.yaml
new file mode 100644
index 000000000000..f369385ffaf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/syna,rmi4.yaml
@@ -0,0 +1,293 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/syna,rmi4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics RMI4 compliant devices
+
+maintainers:
+  - Jason A. Donenfeld <Jason@zx2c4.com>
+  - Matthias Schiffer <matthias.schiffer@ew.tq-group.com
+  - Vincent Huang <vincent.huang@tw.synaptics.com>
+
+description: |
+  The Synaptics RMI4 (Register Mapped Interface 4) core is able to support RMI4
+  devices using different transports (I2C, SPI) and different functions (e.g.
+  Function 1, 2D sensors using Function 11 or 12).
+
+properties:
+  compatible:
+    enum:
+      - syna,rmi4-i2c
+      - syna,rmi4-spi
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: Active low signal
+
+  spi-cpha: true
+  spi-cpol: true
+
+  syna,reset-delay-ms:
+    description:
+      Delay to wait after resetting the device.
+
+  syna,startup-delay-ms:
+    description:
+      Delay to wait after powering on the device.
+
+  vdd-supply: true
+  vio-supply: true
+
+  rmi4-f01@1:
+    type: object
+    additionalProperties: false
+    description:
+      Function 1
+
+    properties:
+      reg:
+        maxItems: 1
+
+      syna,nosleep-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description:
+          If set the device will run at full power without sleeping.  nosleep
+          has 3 modes, 0 will not change the default setting, 1 will disable
+          nosleep (allow sleeping), and 2 will enable nosleep (disabling
+          sleep).
+
+      syna,wakeup-threshold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Defines the amplitude of the disturbance to the background
+          capacitance that will cause the device to wake from dozing.
+
+      syna,doze-holdoff-ms:
+        description:
+          The delay to wait after the last finger lift and the first doze
+          cycle.
+
+      syna,doze-interval-ms:
+        description:
+          The time period that the device sleeps between finger activity.
+
+    required:
+      - reg
+
+  rmi4-f1a@1a:
+    type: object
+    additionalProperties: false
+    $ref: input.yaml#
+    description:
+      RMI4 Function 1A is for capacitive keys.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      linux,keycodes:
+        minItems: 1
+        maxItems: 4
+
+    required:
+      - reg
+
+patternProperties:
+  "^rmi4-f1[12]@1[12]$":
+    type: object
+    unevaluatedProperties: false
+    $ref: /schemas/input/touchscreen/touchscreen.yaml#
+    description:
+      RMI4 Function 11 and Function 12 are for 2D touch position sensing.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      syna,clip-x-low:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Minimum value for X.
+
+      syna,clip-y-low:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Minimum value for Y.
+
+      syna,clip-x-high:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Maximum value for X.
+
+      syna,clip-y-high:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Maximum value for Y.
+
+      syna,offset-x:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Add an offset to X.
+
+      syna,offset-y:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Add an offset to Y.
+
+      syna,delta-x-threshold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Minimum distance on the X axis required to generate an interrupt in
+          reduced reporting mode.
+
+      syna,delta-y-threshold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Minimum distance on the Y axis required to generate an interrupt in
+          reduced reporting mode.
+
+      syna,sensor-type:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2]
+        description: |
+          Sensor type: 1 for touchscreen 2 for touchpad.
+
+      syna,disable-report-mask:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Mask for disabling posiiton reporting. Used to disable reporing
+          absolute position data.
+
+      syna,rezero-wait-ms:
+        description:
+          Time to wait after issuing a rezero command.
+
+    required:
+      - reg
+
+  "^rmi4-f[0-9a-f]+@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    description:
+      Other functions, not documented yet.
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: syna,rmi4-i2c
+    then:
+      properties:
+        spi-rx-delay-us: false
+        spi-tx-delay-us: false
+    else:
+      properties:
+        syna,reset-delay-ms: false
+        syna,startup-delay-ms: false
+
+examples:
+  - |
+    #include <dt-bindings/input/linux-event-codes.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@20 {
+            compatible = "syna,rmi4-i2c";
+            reg = <0x20>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+            syna,startup-delay-ms = <100>;
+            vdd-supply = <&tsp_vdd>;
+            vio-supply = <&ldo32_reg>;
+
+            pinctrl-0 = <&touch_irq>;
+            pinctrl-names = "default";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            rmi4-f01@1 {
+                reg = <0x1>;
+                syna,nosleep-mode = <1>;
+            };
+
+            rmi4-f12@12 {
+                reg = <0x12>;
+                syna,sensor-type = <1>;
+            };
+
+            rmi4-f1a@1a {
+                reg = <0x1a>;
+                linux,keycodes = <KEY_BACK KEY_HOME KEY_MENU>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@0 {
+            compatible = "syna,rmi4-spi";
+            reg = <0x0>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+            spi-max-frequency = <4000000>;
+            spi-rx-delay-us = <30>;
+            spi-cpha;
+            spi-cpol;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            rmi4-f01@1 {
+                reg = <0x1>;
+                syna,nosleep-mode = <1>;
+            };
+
+            rmi4-f11@11 {
+                reg = <0x11>;
+                touchscreen-inverted-y;
+                syna,sensor-type = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/tca8418_keypad.txt b/Documentation/devicetree/bindings/input/tca8418_keypad.txt
deleted file mode 100644
index 255185009167..000000000000
--- a/Documentation/devicetree/bindings/input/tca8418_keypad.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-This binding is based on the matrix-keymap binding with the following
-changes:
-
-keypad,num-rows and keypad,num-columns are required.
-
-Required properties:
-- compatible: "ti,tca8418"
-- reg: the I2C address
-- interrupts: IRQ line number, should trigger on falling edge
-- linux,keymap: Keys definitions, see keypad-matrix.
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt
deleted file mode 100644
index 4c5312eaaa85..000000000000
--- a/Documentation/devicetree/bindings/input/ti,drv260x.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Texas Instruments - drv260x Haptics driver family
-
-Required properties:
-	- compatible - One of:
-		"ti,drv2604" - DRV2604
-		"ti,drv2605" - DRV2605
-		"ti,drv2605l" - DRV2605L
-	- reg -  I2C slave address
-	- vbat-supply - Required supply regulator
-	- mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h)
-		DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric)
-		DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration
-				sequence during init.  And the device is configured for real
-				time playback mode (RTP mode).
-		DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator)
-	- library-sel - These are ROM based waveforms pre-programmed into the IC.
-				This should be set to set the library to use at power up.
-				(defined in include/dt-bindings/input/ti-drv260x.h)
-		DRV260X_LIB_EMPTY - Do not use a pre-programmed library
-		DRV260X_ERM_LIB_A - Pre-programmed Library
-		DRV260X_ERM_LIB_B - Pre-programmed Library
-		DRV260X_ERM_LIB_C - Pre-programmed Library
-		DRV260X_ERM_LIB_D - Pre-programmed Library
-		DRV260X_ERM_LIB_E - Pre-programmed Library
-		DRV260X_ERM_LIB_F - Pre-programmed Library
-		DRV260X_LIB_LRA - Pre-programmed LRA Library
-
-Optional properties:
-	- enable-gpio - gpio pin to enable/disable the device.
-	- vib-rated-mv - The rated voltage of the actuator in millivolts.
-			  If this is not set then the value will be defaulted to
-			  3.2 v.
-	- vib-overdrive-mv - The overdrive voltage of the actuator in millivolts.
-			  If this is not set then the value will be defaulted to
-			  3.2 v.
-Example:
-
-haptics: haptics@5a {
-	compatible = "ti,drv2605l";
-	reg = <0x5a>;
-	vbat-supply = <&vbat>;
-	enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	mode = <DRV260X_LRA_MODE>;
-	library-sel = <DRV260X_LIB_LRA>;
-	vib-rated-mv = <3200>;
-	vib-overdrive-mv = <3200>;
-}
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2605
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.yaml b/Documentation/devicetree/bindings/input/ti,drv260x.yaml
new file mode 100644
index 000000000000..c6245c5b9e2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv260x.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv260x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv260x Haptics driver family
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,drv2604
+      - ti,drv2605
+      - ti,drv2605l
+
+  reg:
+    maxItems: 1
+
+  vbat-supply:
+    description: Power supply to the haptic motor
+
+  # TODO: Deprecate 'mode' in favor of differently named property
+  mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Power up mode of the chip
+      (defined in include/dt-bindings/input/ti-drv260x.h)
+
+      DRV260X_LRA_MODE
+        Linear Resonance Actuator mode (Piezoelectric)
+
+      DRV260X_LRA_NO_CAL_MODE
+        This is a LRA Mode but there is no calibration sequence during init.
+        And the device is configured for real time playback mode (RTP mode).
+
+      DRV260X_ERM_MODE
+        Eccentric Rotating Mass mode (Rotary vibrator)
+    enum: [ 0, 1, 2 ]
+
+  library-sel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      These are ROM based waveforms pre-programmed into the IC.
+      This should be set to set the library to use at power up.
+      (defined in include/dt-bindings/input/ti-drv260x.h)
+
+      DRV260X_LIB_EMPTY - Do not use a pre-programmed library
+      DRV260X_ERM_LIB_A - Pre-programmed Library
+      DRV260X_ERM_LIB_B - Pre-programmed Library
+      DRV260X_ERM_LIB_C - Pre-programmed Library
+      DRV260X_ERM_LIB_D - Pre-programmed Library
+      DRV260X_ERM_LIB_E - Pre-programmed Library
+      DRV260X_ERM_LIB_F - Pre-programmed Library
+      DRV260X_LIB_LRA - Pre-programmed LRA Library
+    enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+
+  enable-gpio:
+    maxItems: 1
+    deprecated: true
+
+  enable-gpios:
+    maxItems: 1
+
+  vib-rated-mv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The rated voltage of the actuator in millivolts.
+      If this is not set then the value will be defaulted to 3200 mV.
+    default: 3200
+
+  vib-overdrive-mv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The overdrive voltage of the actuator in millivolts.
+      If this is not set then the value will be defaulted to 3200 mV.
+    default: 3200
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - mode
+  - library-sel
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/ti-drv260x.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        haptics@5a {
+            compatible = "ti,drv2605l";
+            reg = <0x5a>;
+            vbat-supply = <&vbat>;
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            mode = <DRV260X_LRA_MODE>;
+            library-sel = <DRV260X_LIB_LRA>;
+            vib-rated-mv = <3200>;
+            vib-overdrive-mv = <3200>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/ti,drv2665.txt b/Documentation/devicetree/bindings/input/ti,drv2665.txt
deleted file mode 100644
index 1ba97ac04305..000000000000
--- a/Documentation/devicetree/bindings/input/ti,drv2665.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Texas Instruments - drv2665 Haptics driver
-
-Required properties:
-	- compatible - "ti,drv2665" - DRV2665
-	- reg -  I2C slave address
-	- vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
-	compatible = "ti,drv2665";
-	reg = <0x59>;
-	vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2665
diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt
deleted file mode 100644
index 996382cf994a..000000000000
--- a/Documentation/devicetree/bindings/input/ti,drv2667.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Texas Instruments - drv2667 Haptics driver
-
-Required properties:
-	- compatible - "ti,drv2667" - DRV2667
-	- reg -  I2C slave address
-	- vbat-supply - Required supply regulator
-
-Example:
-
-haptics: haptics@59 {
-	compatible = "ti,drv2667";
-	reg = <0x59>;
-	vbat-supply = <&vbat>;
-};
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2667
diff --git a/Documentation/devicetree/bindings/input/ti,drv266x.yaml b/Documentation/devicetree/bindings/input/ti,drv266x.yaml
new file mode 100644
index 000000000000..1bce389d0e5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv266x.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv266x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv266x Haptics driver
+
+description: |
+  Product Page:
+    http://www.ti.com/product/drv2665
+    http://www.ti.com/product/drv2667
+
+maintainers:
+  - Anshul Dalal <anshulusr@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,drv2665
+      - ti,drv2667
+
+  reg:
+    maxItems: 1
+
+  vbat-supply:
+    description: Required supply regulator
+
+required:
+  - compatible
+  - reg
+  - vbat-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        haptics@59 {
+            compatible = "ti,drv2667";
+            reg = <0x59>;
+            vbat-supply = <&vbat>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt b/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt
deleted file mode 100644
index 513d94d6e899..000000000000
--- a/Documentation/devicetree/bindings/input/ti,nspire-keypad.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-TI-NSPIRE Keypad
-
-Required properties:
-- compatible: Compatible property value should be "ti,nspire-keypad".
-
-- reg: Physical base address of the peripheral and length of memory mapped
-  region.
-
-- interrupts: The interrupt number for the peripheral.
-
-- scan-interval: How often to scan in us. Based on a APB speed of 33MHz, the
-	maximum and minimum delay time is ~2000us and ~500us respectively
-
-- row-delay: How long to wait before scanning each row.
-
-- clocks: The clock this peripheral is attached to.
-
-- linux,keymap: The keymap to use
-	(see Documentation/devicetree/bindings/input/matrix-keymap.txt)
-
-Optional properties:
-- active-low: Specify that the keypad is active low (i.e. logical low signifies
-	a key press).
-
-Example:
-
-input {
-	compatible = "ti,nspire-keypad";
-	reg = <0x900E0000 0x1000>;
-	interrupts = <16>;
-
-	scan-interval = <1000>;
-	row-delay = <200>;
-
-	clocks = <&apb_pclk>;
-
-	linux,keymap = <
-	0x0000001c	0x0001001c	0x00040039
-	0x0005002c	0x00060015	0x0007000b
-	0x0008000f	0x0100002d	0x01010011
-	0x0102002f	0x01030004	0x01040016
-	0x01050014	0x0106001f	0x01070002
-	0x010a006a	0x02000013	0x02010010
-	0x02020019	0x02030007	0x02040018
-	0x02050031	0x02060032	0x02070005
-	0x02080028	0x0209006c	0x03000026
-	0x03010025	0x03020024	0x0303000a
-	0x03040017	0x03050023	0x03060022
-	0x03070008	0x03080035	0x03090069
-	0x04000021	0x04010012	0x04020020
-	0x0404002e	0x04050030	0x0406001e
-	0x0407000d	0x04080037	0x04090067
-	0x05010038	0x0502000c	0x0503001b
-	0x05040034	0x0505001a	0x05060006
-	0x05080027	0x0509000e	0x050a006f
-	0x0600002b	0x0602004e	0x06030068
-	0x06040003	0x0605006d	0x06060009
-	0x06070001	0x0609000f	0x0708002a
-	0x0709001d	0x070a0033	>;
-};
diff --git a/Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml b/Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml
new file mode 100644
index 000000000000..ed3cfff13add
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,nspire-keypad.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,nspire-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-NSPIRE Keypad
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+allOf:
+  - $ref: input.yaml#
+  - $ref: matrix-keymap.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,nspire-keypad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  scan-interval:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: How often to scan in us. Based on a APB speed of 33MHz, the
+      maximum and minimum delay time is ~2000us and ~500us respectively
+
+  row-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: How long to wait between scanning each row in us.
+
+  active-low:
+    description: Specify that the keypad is active low.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - scan-interval
+  - row-delay
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    keypad@900e0000 {
+        compatible = "ti,nspire-keypad";
+        reg = <0x900e0000 0x1000>;
+        interrupts = <16>;
+
+        clocks = <&apb_pclk>;
+
+        scan-interval = <1000>;
+        row-delay = <200>;
+
+        linux,keymap = <
+            MATRIX_KEY(0,  0, KEY_ENTER)
+            MATRIX_KEY(0,  1, KEY_ENTER)
+            MATRIX_KEY(0,  4, KEY_SPACE)
+            MATRIX_KEY(0,  5, KEY_Z)
+            MATRIX_KEY(0,  6, KEY_Y)
+            MATRIX_KEY(0,  7, KEY_0)
+        >;
+    };
diff --git a/Documentation/devicetree/bindings/input/ti,tca8418.yaml b/Documentation/devicetree/bindings/input/ti,tca8418.yaml
new file mode 100644
index 000000000000..624a1830d0b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,tca8418.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,tca8418.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TCA8418 I2C/SMBus keypad scanner
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tca8418
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: matrix-keymap.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        keypad@34 {
+            compatible = "ti,tca8418";
+            reg = <0x34>;
+            interrupt-parent = <&gpio5>;
+            interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+            keypad,num-rows = <4>;
+            keypad,num-columns = <4>;
+            linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
+                             MATRIX_KEY(0x00, 0x00, BTN_1)
+                             MATRIX_KEY(0x01, 0x01, BTN_2)
+                             MATRIX_KEY(0x01, 0x00, BTN_3)
+                             MATRIX_KEY(0x02, 0x00, BTN_4)
+                             MATRIX_KEY(0x00, 0x03, BTN_5)
+                             MATRIX_KEY(0x00, 0x02, BTN_6)
+                             MATRIX_KEY(0x01, 0x03, BTN_7)
+                             MATRIX_KEY(0x01, 0x02, BTN_8)
+                             MATRIX_KEY(0x02, 0x02, BTN_9)
+            >;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt b/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
deleted file mode 100644
index afa38dc069f0..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/ad7879.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-* Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C)
-
-Required properties:
-- compatible			: for SPI slave, use "adi,ad7879"
-				  for I2C slave, use "adi,ad7879-1"
-- reg				: SPI chipselect/I2C slave address
-				  See spi-bus.txt for more SPI slave properties
-- interrupts			: touch controller interrupt
-- touchscreen-max-pressure	: maximum reported pressure
-- adi,resistance-plate-x	: total resistance of X-plate (for pressure
-				  calculation)
-Optional properties:
-- touchscreen-swapped-x-y	: X and Y axis are swapped (boolean)
-- adi,first-conversion-delay	: 0-12: In 128us steps (starting with 128us)
-				  13  : 2.560ms
-				  14  : 3.584ms
-				  15  : 4.096ms
-				  This property has to be a '/bits/ 8' value
-- adi,acquisition-time		: 0: 2us
-				  1: 4us
-				  2: 8us
-				  3: 16us
-				  This property has to be a '/bits/ 8' value
-- adi,median-filter-size	: 0: disabled
-				  1: 4 measurements
-				  2: 8 measurements
-				  3: 16 measurements
-				  This property has to be a '/bits/ 8' value
-- adi,averaging			: 0: 2 middle values (1 if median disabled)
-				  1: 4 middle values
-				  2: 8 middle values
-				  3: 16 values
-				  This property has to be a '/bits/ 8' value
-- adi,conversion-interval:	: 0    : convert one time only
-				  1-255: 515us + val * 35us (up to 9.440ms)
-				  This property has to be a '/bits/ 8' value
-- gpio-controller		: Switch AUX/VBAT/GPIO pin to GPIO mode
-
-Example:
-
-	touchscreen0@2c {
-		compatible = "adi,ad7879-1";
-		reg = <0x2c>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-max-pressure = <4096>;
-		adi,resistance-plate-x = <120>;
-		adi,first-conversion-delay = /bits/ 8 <3>;
-		adi,acquisition-time = /bits/ 8 <1>;
-		adi,median-filter-size = /bits/ 8 <2>;
-		adi,averaging = /bits/ 8 <1>;
-		adi,conversion-interval = /bits/ 8 <255>;
-	};
-
-	touchscreen1@1 {
-		compatible = "adi,ad7879";
-		spi-max-frequency = <5000000>;
-		reg = <1>;
-		spi-cpol;
-		spi-cpha;
-		gpio-controller;
-		interrupt-parent = <&gpio1>;
-		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-		touchscreen-max-pressure = <4096>;
-		adi,resistance-plate-x = <120>;
-		adi,first-conversion-delay = /bits/ 8 <3>;
-		adi,acquisition-time = /bits/ 8 <1>;
-		adi,median-filter-size = /bits/ 8 <2>;
-		adi,averaging = /bits/ 8 <1>;
-		adi,conversion-interval = /bits/ 8 <255>;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml
new file mode 100644
index 000000000000..caa5fa3cc3f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/adi,ad7879.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/adi,ad7879.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7879(-1)/AD7889(-1) touchscreen interface (SPI/I2C)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    description: |
+      for SPI slave, use "adi,ad7879"
+      for I2C slave, use "adi,ad7879-1"
+    enum:
+      - adi,ad7879
+      - adi,ad7879-1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  touchscreen-max-pressure:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum reported pressure
+
+  adi,resistance-plate-x:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: total resistance of X-plate (for pressure calculation)
+
+  touchscreen-swapped-x-y:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: X and Y axis are swapped (boolean)
+
+  adi,first-conversion-delay:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    default: 0
+    minimum: 0
+    maximum: 15
+    description: |
+      0-12: In 128us steps (starting with 128us)
+      13  : 2.560ms
+      14  : 3.584ms
+      15  : 4.096ms
+      This property has to be a '/bits/ 8' value
+
+  adi,acquisition-time:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    default: 0
+    enum: [0, 1, 2, 3]
+    description: |
+      0: 2us
+      1: 4us
+      2: 8us
+      3: 16us
+      This property has to be a '/bits/ 8' value
+
+  adi,median-filter-size:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    default: 0
+    enum: [0, 1, 2, 3]
+    description: |
+      0: disabled
+      1: 4 measurements
+      2: 8 measurements
+      3: 16 measurements
+      This property has to be a '/bits/ 8' value
+
+  adi,averaging:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    default: 0
+    enum: [0, 1, 2, 3]
+    description: |
+      0: 2 middle values (1 if median disabled)
+      1: 4 middle values
+      2: 8 middle values
+      3: 16 values
+      This property has to be a '/bits/ 8' value
+
+  adi,conversion-interval:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    default: 0
+    description: |
+      0    : convert one time only
+      1-255: 515us + val * 35us (up to 9.440ms)
+      This property has to be a '/bits/ 8' value
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen0@2c {
+            compatible = "adi,ad7879-1";
+            reg = <0x2c>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+            touchscreen-max-pressure = <4096>;
+            adi,resistance-plate-x = <120>;
+            adi,first-conversion-delay = /bits/ 8 <3>;
+            adi,acquisition-time = /bits/ 8 <1>;
+            adi,median-filter-size = /bits/ 8 <2>;
+            adi,averaging = /bits/ 8 <1>;
+            adi,conversion-interval = /bits/ 8 <255>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen1@1 {
+            compatible = "adi,ad7879";
+            reg = <1>;
+            spi-max-frequency = <5000000>;
+            gpio-controller;
+            #gpio-cells = <1>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+            touchscreen-max-pressure = <4096>;
+            adi,resistance-plate-x = <120>;
+            adi,first-conversion-delay = /bits/ 8 <3>;
+            adi,acquisition-time = /bits/ 8 <1>;
+            adi,median-filter-size = /bits/ 8 <2>;
+            adi,averaging = /bits/ 8 <1>;
+            adi,conversion-interval = /bits/ 8 <255>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt b/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
deleted file mode 100644
index 81f6bda97d3c..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
+++ /dev/null
@@ -1,106 +0,0 @@
-Device tree bindings for TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046
-SPI driven touch screen controllers.
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in
-
-	Documentation/devicetree/bindings/spi/spi-bus.txt
-
-must be specified.
-
-Additional required properties:
-
-	compatible		Must be one of the following, depending on the
-				model:
-					"ti,tsc2046"
-					"ti,ads7843"
-					"ti,ads7845"
-					"ti,ads7846"
-					"ti,ads7873"
-
-	interrupts		An interrupt node describing the IRQ line the chip's
-				!PENIRQ pin is connected to.
-	vcc-supply		A regulator node for the supply voltage.
-
-
-Optional properties:
-
-	ti,vref-delay-usecs		vref supply delay in usecs, 0 for
-					external vref (u16).
-	ti,vref-mv			The VREF voltage, in millivolts (u16).
-					Set to 0 to use internal references
-					(ADS7846).
-	ti,keep-vref-on			set to keep vref on for differential
-					measurements as well
-	ti,settle-delay-usec		Settling time of the analog signals;
-					a function of Vcc and the capacitance
-					on the X/Y drivers.  If set to non-zero,
-					two samples are taken with settle_delay
-					us apart, and the second one is used.
-					~150 uSec with 0.01uF caps (u16).
-	ti,penirq-recheck-delay-usecs	If set to non-zero, after samples are
-					taken this delay is applied and penirq
-					is rechecked, to help avoid false
-					events.  This value is affected by the
-					material used to build the touch layer
-					(u16).
-	ti,x-plate-ohms			Resistance of the X-plate,
-					in Ohms (u16).
-	ti,y-plate-ohms			Resistance of the Y-plate,
-					in Ohms (u16).
-	ti,x-min			Minimum value on the X axis (u16).
-	ti,y-min			Minimum value on the Y axis (u16).
-	ti,debounce-tol			Tolerance used for filtering (u16).
-	ti,debounce-rep			Additional consecutive good readings
-					required after the first two (u16).
-	ti,pendown-gpio-debounce	Platform specific debounce time for the
-					pendown-gpio (u32).
-	pendown-gpio			GPIO handle describing the pin the !PENIRQ
-					line is connected to.
-	wakeup-source			use any event on touchscreen as wakeup event.
-					(Legacy property support: "linux,wakeup")
-	touchscreen-size-x		General touchscreen binding, see [1].
-	touchscreen-size-y		General touchscreen binding, see [1].
-	touchscreen-max-pressure	General touchscreen binding, see [1].
-	touchscreen-min-pressure	General touchscreen binding, see [1].
-	touchscreen-average-samples	General touchscreen binding, see [1].
-	touchscreen-inverted-x		General touchscreen binding, see [1].
-	touchscreen-inverted-y		General touchscreen binding, see [1].
-	touchscreen-swapped-x-y		General touchscreen binding, see [1].
-
-[1] All general touchscreen properties are described in
-    Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
-
-Deprecated properties:
-
-	ti,swap-xy			swap x and y axis
-	ti,x-max			Maximum value on the X axis (u16).
-	ti,y-max			Maximum value on the Y axis (u16).
-	ti,pressure-min			Minimum reported pressure value
-					(threshold) - u16.
-	ti,pressure-max			Maximum reported pressure value (u16).
-	ti,debounce-max			Max number of additional readings per
-					sample (u16).
-
-Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
-
-	spi_controller {
-		tsc2046@0 {
-			reg = <0>;	/* CS0 */
-			compatible = "ti,tsc2046";
-			interrupt-parent = <&gpio1>;
-			interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
-			spi-max-frequency = <1000000>;
-			pendown-gpio = <&gpio1 8 0>;
-			vcc-supply = <&reg_vcc3>;
-
-			ti,x-min = /bits/ 16 <0>;
-			ti,x-max = /bits/ 16 <8000>;
-			ti,y-min = /bits/ 16 <0>;
-			ti,y-max = /bits/ 16 <4800>;
-			ti,x-plate-ohms = /bits/ 16 <40>;
-			ti,pressure-max = /bits/ 16 <255>;
-
-			wakeup-source;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml
new file mode 100644
index 000000000000..402ca6bffd34
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/apple,z2-multitouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple touchscreens attached using the Z2 protocol
+
+maintainers:
+  - Sasha Finkelstein <fnkl.kernel@gmail.com>
+
+description: A series of touschscreen controllers used in Apple products
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - apple,j293-touchbar
+      - apple,j493-touchbar
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  firmware-name:
+    maxItems: 1
+
+  apple,z2-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 4096
+    description:
+      Calibration blob supplied by the bootloader
+
+required:
+  - compatible
+  - interrupts
+  - reset-gpios
+  - firmware-name
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@0 {
+            compatible = "apple,j293-touchbar";
+            reg = <0>;
+            spi-max-frequency = <11500000>;
+            reset-gpios = <&pinctrl_ap 139 GPIO_ACTIVE_LOW>;
+            interrupts-extended = <&pinctrl_ap 194 IRQ_TYPE_EDGE_FALLING>;
+            firmware-name = "apple/dfrmtfw-j293.bin";
+            touchscreen-size-x = <23045>;
+            touchscreen-size-y = <640>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
index f40f21c642b9..b8db975e9f77 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
@@ -17,10 +17,10 @@ Example:
 		auo_pixcir_ts@5c {
 			compatible = "auo,auo_pixcir_ts";
 			reg = <0x5c>;
-			interrupts = <2 0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 
-			gpios = <&gpf 2 0 2>, /* INT */
-				<&gpf 5 1 0>; /* RST */
+			gpios = <&gpf 2 0 GPIO_LEVEL_HIGH>, /* INT */
+				<&gpf 5 1 GPIO_LEVEL_LOW>; /* RST */
 
 			x-size = <800>;
 			y-size = <600>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml
new file mode 100644
index 000000000000..e4dbbafb3779
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs7211.yaml
@@ -0,0 +1,769 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs7211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS7210A/7211A/E Trackpad/Touchscreen Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS7210A, IQS7211A and IQS7211E trackpad and touchscreen control-
+  lers employ projected-capacitance sensing and can track two contacts.
+
+  Link to datasheets: https://www.azoteq.com/
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs7210a
+      - azoteq,iqs7211a
+      - azoteq,iqs7211e
+
+  reg:
+    maxItems: 1
+
+  irq-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low RDY output. The
+      pin doubles as the IQS7211E's active-low MCLR input, in which case this
+      GPIO must be configured as open-drain.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low MCLR input. The
+      device is temporarily held in hardware reset prior to initialization if
+      this property is present.
+
+  azoteq,forced-comms:
+    type: boolean
+    description:
+      Enables forced communication; to be used with host adapters that cannot
+      tolerate clock stretching.
+
+  azoteq,forced-comms-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description:
+      Indicates if the device's OTP memory enables (1) or disables (0) forced
+      communication by default. Specifying this property can expedite startup
+      time if the default value is known.
+
+      If this property is not specified, communication is not initiated until
+      the device asserts its RDY pin shortly after exiting hardware reset. At
+      that point, forced communication is either enabled or disabled based on
+      the presence or absence of the 'azoteq,forced-comms' property.
+
+  azoteq,rate-active-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the report rate (in ms) during active mode.
+
+  azoteq,rate-touch-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the report rate (in ms) during idle-touch mode.
+
+  azoteq,rate-idle-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the report rate (in ms) during idle mode.
+
+  azoteq,rate-lp1-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the report rate (in ms) during low-power mode 1.
+
+  azoteq,rate-lp2-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the report rate (in ms) during low-power mode 2.
+
+  azoteq,timeout-active-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 65535000
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from active mode to idle or idle-touch modes.
+
+  azoteq,timeout-touch-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 65535000
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from idle-touch mode to idle mode.
+
+  azoteq,timeout-idle-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 65535000
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from idle mode to low-power mode 1.
+
+  azoteq,timeout-lp1-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 65535000
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from low-power mode 1 to low-power mode 2.
+
+  azoteq,timeout-lp2-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 60000
+    description:
+      Specifies the rate (in ms) at which the trackpad reference values
+      are updated during low-power modes 1 and 2.
+
+  azoteq,timeout-ati-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 60000
+    description:
+      Specifies the delay (in ms) before the automatic tuning implementation
+      (ATI) is retried in the event it fails to complete.
+
+  azoteq,timeout-comms-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the delay (in ms) before a communication window is closed.
+
+  azoteq,timeout-press-ms:
+    multipleOf: 1000
+    minimum: 0
+    maximum: 60000
+    description:
+      Specifies the length of time (in ms) to wait before automatically
+      releasing a press event. Specify zero to allow the press state to
+      persist indefinitely.
+
+  azoteq,fosc-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Specifies the device's core clock frequency as follows:
+      0: 14 MHz
+      1: 18 MHz
+
+  azoteq,fosc-trim:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description: Specifies the device's core clock frequency trim.
+
+  azoteq,num-contacts:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 2
+    default: 0
+    description: Specifies the number of contacts reported by the device.
+
+  azoteq,contact-split:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+    description: Specifies the contact (finger) split factor.
+
+  azoteq,trim-x:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+    description: Specifies the horizontal trim width.
+
+  azoteq,trim-y:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+    description: Specifies the vertical trim height.
+
+  trackpad:
+    type: object
+    description: Represents all channels associated with the trackpad.
+
+    properties:
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the order of the CRx pin(s) associated with the trackpad.
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 12
+        items:
+          minimum: 0
+          maximum: 11
+        description:
+          Specifies the order of the CTx pin(s) associated with the trackpad.
+
+      azoteq,channel-select:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 36
+        items:
+          minimum: 0
+          maximum: 255
+        description: |
+          Specifies the channels mapped to each cycle in the following order:
+          Cycle 0, slot 0
+          Cycle 0, slot 1
+          Cycle 1, slot 0
+          Cycle 1, slot 1
+          ...and so on. Specify 255 to disable a given slot.
+
+      azoteq,ati-frac-div-fine:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the trackpad's ATI fine fractional divider.
+
+      azoteq,ati-frac-mult-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the trackpad's ATI coarse fractional multiplier.
+
+      azoteq,ati-frac-div-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the trackpad's ATI coarse fractional divider.
+
+      azoteq,ati-comp-div:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the trackpad's ATI compensation divider.
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the trackpad's ATI target.
+
+      azoteq,touch-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's touch entrance factor.
+
+      azoteq,touch-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's touch exit factor.
+
+      azoteq,thresh:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's stationary touch threshold.
+
+      azoteq,conv-period:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's conversion period.
+
+      azoteq,conv-frac:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the trackpad's conversion frequency fraction.
+
+    patternProperties:
+      "^event-(tap(-double|-triple)?|hold|palm|swipe-(x|y)-(pos|neg)(-hold)?)$":
+        type: object
+        $ref: ../input.yaml#
+        description:
+          Represents a gesture event reported by the trackpad. In the case of
+          axial gestures, the duration or distance specified in one direction
+          applies to both directions along the same axis.
+
+        properties:
+          linux,code: true
+
+          azoteq,gesture-max-ms:
+            minimum: 0
+            maximum: 65535
+            description: Specifies the maximum duration of tap/swipe gestures.
+
+          azoteq,gesture-mid-ms:
+            minimum: 0
+            maximum: 65535
+            description:
+              Specifies the maximum duration between subsequent tap gestures
+              (IQS7211E only).
+
+          azoteq,gesture-min-ms:
+            minimum: 0
+            maximum: 65535
+            description: Specifies the minimum duration of hold gestures.
+
+          azoteq,gesture-dist:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 65535
+            description:
+              Specifies the minimum (swipe) or maximum (tap and hold) distance
+              a finger may travel to be considered a gesture.
+
+          azoteq,gesture-dist-rep:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 65535
+            description:
+              Specifies the minimum distance a finger must travel to elicit a
+              repeated swipe gesture (IQS7211E only).
+
+          azoteq,gesture-angle:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 75
+            description:
+              Specifies the maximum angle (in degrees) a finger may travel to
+              be considered a swipe gesture.
+
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 42
+            description: Specifies the palm gesture threshold (IQS7211E only).
+
+        additionalProperties: false
+
+    dependencies:
+      azoteq,rx-enable: ["azoteq,tx-enable"]
+      azoteq,tx-enable: ["azoteq,rx-enable"]
+      azoteq,channel-select: ["azoteq,rx-enable"]
+
+    additionalProperties: false
+
+  alp:
+    type: object
+    $ref: ../input.yaml#
+    description: Represents the alternate low-power channel (ALP).
+
+    properties:
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8
+        items:
+          minimum: 0
+          maximum: 7
+        description:
+          Specifies the CRx pin(s) associated with the ALP in no particular
+          order.
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 12
+        items:
+          minimum: 0
+          maximum: 11
+        description:
+          Specifies the CTx pin(s) associated with the ALP in no particular
+          order.
+
+      azoteq,ati-frac-div-fine:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the ALP's ATI fine fractional divider.
+
+      azoteq,ati-frac-mult-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the ALP's ATI coarse fractional multiplier.
+
+      azoteq,ati-frac-div-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the ALP's ATI coarse fractional divider.
+
+      azoteq,ati-comp-div:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the ALP's ATI compensation divider.
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the ALP's ATI target.
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 8
+        minimum: 0
+        maximum: 255
+        description: Specifies the ALP's ATI base.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          Specifies the ALP's ATI mode as follows:
+          0: Partial
+          1: Full
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          Specifies the ALP's sensing mode as follows:
+          0: Self capacitive
+          1: Mutual capacitive
+
+      azoteq,debounce-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the ALP's debounce entrance factor.
+
+      azoteq,debounce-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the ALP's debounce exit factor.
+
+      azoteq,thresh:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the ALP's proximity or touch threshold.
+
+      azoteq,conv-period:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the ALP's conversion period.
+
+      azoteq,conv-frac:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the ALP's conversion frequency fraction.
+
+      linux,code: true
+
+    additionalProperties: false
+
+  button:
+    type: object
+    description: Represents the inductive or capacitive button.
+
+    properties:
+      azoteq,ati-frac-div-fine:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the button's ATI fine fractional divider.
+
+      azoteq,ati-frac-mult-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the button's ATI coarse fractional multiplier.
+
+      azoteq,ati-frac-div-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the button's ATI coarse fractional divider.
+
+      azoteq,ati-comp-div:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the button's ATI compensation divider.
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the button's ATI target.
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 8
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's ATI base.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1]
+        description: |
+          Specifies the button's ATI mode as follows:
+          0: Partial
+          1: Full
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        description: |
+          Specifies the button's sensing mode as follows:
+          0: Self capacitive
+          1: Mutual capacitive
+          2: Inductive
+
+      azoteq,touch-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's touch entrance factor.
+
+      azoteq,touch-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's touch exit factor.
+
+      azoteq,debounce-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's debounce entrance factor.
+
+      azoteq,debounce-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's debounce exit factor.
+
+      azoteq,thresh:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the button's proximity threshold.
+
+      azoteq,conv-period:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's conversion period.
+
+      azoteq,conv-frac:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the button's conversion frequency fraction.
+
+    patternProperties:
+      "^event-(prox|touch)$":
+        type: object
+        $ref: ../input.yaml#
+        description:
+          Represents a proximity or touch event reported by the button.
+
+        properties:
+          linux,code: true
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+  wakeup-source: true
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+dependencies:
+  touchscreen-size-x: ["azoteq,num-contacts"]
+  touchscreen-size-y: ["azoteq,num-contacts"]
+  touchscreen-inverted-x: ["azoteq,num-contacts"]
+  touchscreen-inverted-y: ["azoteq,num-contacts"]
+  touchscreen-swapped-x-y: ["azoteq,num-contacts"]
+
+required:
+  - compatible
+  - reg
+  - irq-gpios
+
+additionalProperties: false
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7210a
+
+    then:
+      properties:
+        alp:
+          properties:
+            azoteq,rx-enable:
+              maxItems: 4
+              items:
+                minimum: 4
+
+    else:
+      properties:
+        azoteq,timeout-press-ms: false
+
+        alp:
+          properties:
+            azoteq,ati-mode: false
+
+        button: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7211e
+
+    then:
+      properties:
+        reset-gpios: false
+
+        trackpad:
+          properties:
+            azoteq,tx-enable:
+              maxItems: 13
+              items:
+                maximum: 12
+
+        alp:
+          properties:
+            azoteq,tx-enable:
+              maxItems: 13
+              items:
+                maximum: 12
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/input.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touchscreen@56 {
+                    compatible = "azoteq,iqs7210a";
+                    reg = <0x56>;
+                    irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                    reset-gpios = <&gpio 17 (GPIO_ACTIVE_LOW |
+                                             GPIO_PUSH_PULL)>;
+                    azoteq,num-contacts = <2>;
+
+                    trackpad {
+                            azoteq,rx-enable = <6>, <5>, <4>, <3>, <2>;
+                            azoteq,tx-enable = <1>, <7>, <8>, <9>, <10>;
+                    };
+
+                    button {
+                            azoteq,sense-mode = <2>;
+                            azoteq,touch-enter = <40>;
+                            azoteq,touch-exit = <36>;
+
+                            event-touch {
+                                    linux,code = <KEY_HOME>;
+                            };
+                    };
+
+                    alp {
+                            azoteq,sense-mode = <1>;
+                            linux,code = <KEY_POWER>;
+                    };
+            };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/input.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            touchscreen@56 {
+                    compatible = "azoteq,iqs7211e";
+                    reg = <0x56>;
+                    irq-gpios = <&gpio 4 (GPIO_ACTIVE_LOW |
+                                          GPIO_OPEN_DRAIN)>;
+
+                    trackpad {
+                            event-tap {
+                                    linux,code = <KEY_PLAYPAUSE>;
+                            };
+
+                            event-tap-double {
+                                    linux,code = <KEY_SHUFFLE>;
+                            };
+
+                            event-tap-triple {
+                                    linux,code = <KEY_AGAIN>;
+                            };
+
+                            event-hold {
+                                    linux,code = <KEY_STOP>;
+                            };
+
+                            event-palm {
+                                    linux,code = <KEY_EXIT>;
+                            };
+
+                            event-swipe-x-pos {
+                                    linux,code = <KEY_REWIND>;
+                            };
+
+                            event-swipe-x-pos-hold {
+                                    linux,code = <KEY_PREVIOUS>;
+                            };
+
+                            event-swipe-x-neg {
+                                    linux,code = <KEY_FASTFORWARD>;
+                            };
+
+                            event-swipe-x-neg-hold {
+                                    linux,code = <KEY_NEXT>;
+                            };
+
+                            event-swipe-y-pos {
+                                    linux,code = <KEY_VOLUMEUP>;
+                            };
+
+                            event-swipe-y-pos-hold {
+                                    linux,code = <KEY_MUTE>;
+                            };
+
+                            event-swipe-y-neg {
+                                    linux,code = <KEY_VOLUMEDOWN>;
+                            };
+
+                            event-swipe-y-neg-hold {
+                                    linux,code = <KEY_MUTE>;
+                            };
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt b/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
deleted file mode 100644
index da4c9d8b99b1..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/bu21013.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Rohm BU21013 Touch Screen
-
-Required properties:
- - compatible              : "rohm,bu21013_tp"
- - reg                     : I2C device address
- - reset-gpios             : GPIO pin enabling (selecting) chip (CS)
- - interrupt-parent        : the phandle for the gpio controller
- - interrupts              : (gpio) interrupt to which the chip is connected
-
-Optional properties:
- - touch-gpios             : GPIO pin registering a touch event
- - <supply_name>-supply    : Phandle to a regulator supply
- - touchscreen-size-x      : General touchscreen binding, see [1].
- - touchscreen-size-y      : General touchscreen binding, see [1].
- - touchscreen-inverted-x  : General touchscreen binding, see [1].
- - touchscreen-inverted-y  : General touchscreen binding, see [1].
- - touchscreen-swapped-x-y : General touchscreen binding, see [1].
-
-[1] All general touchscreen properties are described in
-    Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
-
-Deprecated properties:
- - rohm,touch-max-x        : Maximum outward permitted limit in the X axis
- - rohm,touch-max-y        : Maximum outward permitted limit in the Y axis
- - rohm,flip-x             : Flip touch coordinates on the X axis
- - rohm,flip-y             : Flip touch coordinates on the Y axis
-
-Example:
-
-	i2c@80110000 {
-		bu21013_tp@5c {
-			compatible = "rohm,bu21013_tp";
-			reg = <0x5c>;
-			interrupt-parent = <&gpio2>;
-			interrupts <&20 IRQ_TYPE_LEVEL_LOW>;
-			touch-gpio = <&gpio2 20 GPIO_ACTIVE_LOW>;
-			avdd-supply = <&ab8500_ldo_aux1_reg>;
-
-			touchscreen-size-x = <384>;
-			touchscreen-size-y = <704>;
-			touchscreen-inverted-y;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
index 9df685bdc5db..74a8a01e0745 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ChipOne ICN8318 Touchscreen Controller Device Tree Bindings
+title: ChipOne ICN8318 Touchscreen Controller
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
deleted file mode 100644
index 2e1490a8fe74..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* Toradex Colibri VF50 Touchscreen driver
-
-Required Properties:
-- compatible must be toradex,vf50-touchscreen
-- io-channels: adc channels being used by the Colibri VF50 module
-- xp-gpios: FET gate driver for input of X+
-- xm-gpios: FET gate driver for input of X-
-- yp-gpios: FET gate driver for input of Y+
-- ym-gpios: FET gate driver for input of Y-
-- interrupts: pen irq interrupt for touch detection
-- pinctrl-names: "idle", "default", "gpios"
-- pinctrl-0: pinctrl node for pen/touch detection state pinmux
-- pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
-- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
-- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
-
-Example:
-
-	touchctrl: vf50_touchctrl {
-		compatible = "toradex,vf50-touchscreen";
-		io-channels = <&adc1 0>,<&adc0 0>,
-				<&adc0 1>,<&adc1 2>;
-		xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
-		yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "idle","default","gpios";
-		pinctrl-0 = <&pinctrl_touchctrl_idle>;
-		pinctrl-1 = <&pinctrl_touchctrl_default>;
-		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
-		vf50-ts-min-pressure = <200>;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
index 3225c8d1fdaf..86a6d18f952a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma140.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Cypress CY8CTMA140 series touchscreen controller bindings
+title: Cypress CY8CTMA140 series touchscreen controller
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
index 762e56ee90cd..4dfbb93678b5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma340.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Cypress CY8CTMA340 series touchscreen controller bindings
+title: Cypress CY8CTMA340 series touchscreen controller
 
 description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after
   the marketing name Cypress TrueTouch Standard Product) touchscreens can
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
new file mode 100644
index 000000000000..037e5d3c447f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,tt21000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress TT21000 touchscreen controller
+
+description: The Cypress TT21000 series (also known as "CYTTSP5" after
+  the marketing name Cypress TrueTouch Standard Product series 5).
+
+maintainers:
+  - Alistair Francis <alistair@alistair23.me>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: cypress,tt21000
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator for voltage.
+
+  vddio-supply:
+    description: Optional Regulator for I/O voltage.
+
+  reset-gpios:
+    maxItems: 1
+
+  linux,keycodes:
+    description: EV_ABS specific event code generated by the axis.
+
+  wakeup-source: true
+
+patternProperties:
+  "^button@[0-9]+$":
+    type: object
+    $ref: ../input.yaml#
+    properties:
+      reg:
+        maxItems: 1
+      linux,keycodes:
+        description: Keycode to emit
+
+    required:
+      - reg
+      - linux,keycodes
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@24 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "cypress,tt21000";
+            reg = <0x24>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&tp_reset_ds203>;
+            interrupt-parent = <&pio>;
+            interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg_touch>;
+
+            button@0 {
+                reg = <0>;
+                linux,keycodes = <KEY_HOMEPAGE>;
+            };
+
+            button@1 {
+                reg = <1>;
+                linux,keycodes = <KEY_MENU>;
+            };
+
+            button@2 {
+                reg = <2>;
+                linux,keycodes = <KEY_BACK>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index 2e8da7470513..7d3edb58f72d 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: FocalTech EDT-FT5x06 Polytouch Bindings
+title: FocalTech EDT-FT5x06 Polytouch
 
 description: |
              There are 5 variants of the chip for various touch panel sizes
@@ -39,7 +39,12 @@ properties:
       - edt,edt-ft5406
       - edt,edt-ft5506
       - evervision,ev-ft5726
+      - focaltech,ft5426
+      - focaltech,ft5452
       - focaltech,ft6236
+      - focaltech,ft8201
+      - focaltech,ft8716
+      - focaltech,ft8719
 
   reg:
     maxItems: 1
@@ -85,16 +90,23 @@ properties:
     minimum: 0
     maximum: 80
 
-  touchscreen-size-x: true
-  touchscreen-size-y: true
-  touchscreen-fuzz-x: true
-  touchscreen-fuzz-y: true
-  touchscreen-inverted-x: true
-  touchscreen-inverted-y: true
-  touchscreen-swapped-x-y: true
+  report-rate-hz:
+    description: |
+                 Allows setting the scan rate in Hertz.
+                  M06 supports range from 30 to 140 Hz.
+                  M12 supports range from 1 to 255 Hz.
+    minimum: 1
+    maximum: 255
+
+  threshold:
+    description: Allows setting the  "click"-threshold in the range from 0 to 255.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 255
+
   interrupt-controller: true
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
@@ -108,7 +120,7 @@ examples:
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
-      edt-ft5x06@38 {
+      touchscreen@38 {
         compatible = "edt,edt-ft5406";
         reg = <0x38>;
         interrupt-parent = <&gpio2>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
index 007adbc89c14..930c70104b3f 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/eeti,exc3000.yaml
@@ -9,21 +9,35 @@ title: EETI EXC3000 series touchscreen controller
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
 
-allOf:
-  - $ref: touchscreen.yaml#
-
 properties:
   compatible:
-    enum:
-      - eeti,exc3000
-      - eeti,exc80h60
-      - eeti,exc80h84
+    oneOf:
+      - const: eeti,exc3000
+      - const: eeti,exc80h60
+      - const: eeti,exc80h84
+      - const: eeti,egalax_ts # Do NOT use for new binding
+      - const: eeti,exc3000-i2c
+        deprecated: true
+      - items:
+          - enum:
+              - eeti,exc81w32
+          - const: eeti,exc80h84
   reg:
-    const: 0x2a
+    enum: [0x4, 0xa, 0x2a]
   interrupts:
     maxItems: 1
   reset-gpios:
     maxItems: 1
+  wakeup-gpios:
+    maxItems: 1
+  vdd-supply:
+    description: Power supply regulator for the chip
+  attn-gpios:
+    deprecated: true
+    maxItems: 1
+    description: Phandle to a GPIO to check whether interrupt is still
+                 latched. This is necessary for platforms that lack
+                 support for level-triggered IRQs.
   touchscreen-size-x: true
   touchscreen-size-y: true
   touchscreen-inverted-x: true
@@ -34,11 +48,33 @@ required:
   - compatible
   - reg
   - interrupts
-  - touchscreen-size-x
-  - touchscreen-size-y
 
 additionalProperties: false
 
+allOf:
+  - $ref: touchscreen.yaml#
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - eeti,egalax_ts
+                - eeti,exc3000-i2c
+    then:
+      properties:
+        reg:
+          const: 0x2a
+
+        wakeup-gpios: false
+
+        attn-gpios: false
+
+      required:
+        - touchscreen-size-x
+        - touchscreen-size-y
+
 examples:
   - |
     #include "dt-bindings/interrupt-controller/irq.h"
diff --git a/Documentation/devicetree/bindings/input/touchscreen/eeti.txt b/Documentation/devicetree/bindings/input/touchscreen/eeti.txt
deleted file mode 100644
index 32b3712c916e..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/eeti.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Bindings for EETI touchscreen controller
-
-Required properties:
-- compatible:	should be "eeti,exc3000-i2c"
-- reg:		I2C address of the chip. Should be set to <0xa>
-- interrupts:	interrupt to which the chip is connected
-
-Optional properties:
-- attn-gpios:	A handle to a GPIO to check whether interrupt is still
-		latched. This is necessary for platforms that lack
-		support for level-triggered IRQs.
-
-The following optional properties described in touchscreen.txt are
-also supported:
-
-- touchscreen-inverted-x
-- touchscreen-inverted-y
-- touchscreen-swapped-x-y
-
-Example:
-
-i2c-master {
-	touchscreen@a {
-		compatible = "eeti,exc3000-i2c";
-		reg = <0xa>;
-		interrupt-parent = <&gpio>;
-		interrupts = <123 IRQ_TYPE_EDGE_RISING>;
-		attn-gpios = <&gpio 123 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
deleted file mode 100644
index 92fb2620f5e2..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* EETI eGalax Multiple Touch Controller
-
-Required properties:
-- compatible: must be "eeti,egalax_ts"
-- reg: i2c slave address
-- interrupts: touch controller interrupt
-- wakeup-gpios: the gpio pin to be used for waking up the controller
-  and also used as irq pin
-
-Example:
-
-	touchscreen@4 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 2>;
-		wakeup-gpios = <&gpio1 9 0>;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
deleted file mode 100644
index 5eef5e7d6aae..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Elan eKTF2127 I2C touchscreen controller
-
-Required properties:
- - compatible		  : "elan,ektf2127" or "elan,ektf2132"
- - reg			  : I2C slave address of the chip (0x40)
- - interrupts		  : interrupt specification for the ektf2127 interrupt
- - power-gpios		  : GPIO specification for the pin connected to the
-			    ektf2127's wake input. This needs to be driven high
-			    to take ektf2127 out of it's low power state
-
-For additional optional properties see: touchscreen.txt
-
-Example:
-
-i2c@00000000 {
-	ektf2127: touchscreen@15 {
-		compatible = "elan,ektf2127";
-		reg = <0x15>;
-		interrupt-parent = <&pio>;
-		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
-		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml
new file mode 100644
index 000000000000..ff0ec3fd24c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,ektf2127.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/elan,ektf2127.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan eKTF2127 I2C touchscreen controller
+
+maintainers:
+  - Siebren Vroegindeweij <siebren.vroegindeweij@hotmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - elan,ektf2127
+      - elan,ektf2132
+      - elan,ektf2232
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@15 {
+            compatible = "elan,ektf2127";
+            reg = <0x15>;
+            interrupt-parent = <&pio>;
+            interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
+            power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
index a9b53c2e6f0a..3255c2c8951a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/input/touchscreen/elan,elants_i2c.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/input/touchscreen/elan,elants_i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Elantech I2C Touchscreen
 
@@ -14,9 +14,13 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - elan,ektf3624
-      - elan,ekth3500
+    oneOf:
+      - enum:
+          - elan,ektf3624
+          - elan,ekth3500
+      - items:
+          - const: elan,ekth3915
+          - const: elan,ekth3500
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
new file mode 100644
index 000000000000..a99280aefcbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/fsl,imx6ul-tsc.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/fsl,imx6ul-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6UL Touch Controller
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    const: fsl,imx6ul-tsc
+
+  reg:
+    items:
+      - description: touch controller address
+      - description: ADC2 address
+
+  interrupts:
+    items:
+      - description: touch controller address
+      - description: ADC2 address
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: tsc
+      - const: adc
+
+  xnur-gpios:
+    maxItems: 1
+    description:
+      The X- gpio this controller connect to. This xnur-gpio returns to
+      low once the finger leave the touch screen (The last touch event
+      the touch controller capture).
+
+  measure-delay-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The value of measure delay time. Before X-axis or Y-axis measurement,
+      the screen need some time before even potential distribution ready.
+    default: 0xffff
+    minimum: 0
+    maximum: 0xffffff
+
+  pre-charge-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The touch screen need some time to precharge.
+    default: 0xfff
+    minimum: 0
+    maximum: 0xffffffff
+
+  touchscreen-average-samples:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of data samples which are averaged for each read.
+    enum: [ 1, 4, 8, 16, 32 ]
+
+  debounce-delay-us:
+    description: |
+      Minimum duration in microseconds a signal must remain stable
+      to be considered valid.
+
+      Drivers must convert this value to IPG clock cycles and map
+      it to one of the four discrete thresholds exposed by the
+      TSC_DEBUG_MODE2 register:
+
+        0: 8191 IPG cycles
+        1: 4095 IPG cycles
+        2: 2047 IPG cycles
+        3: 1023 IPG cycles
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - xnur-gpios
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx6ul-clock.h>
+    #include <dt-bindings/gpio/gpio.h>
+    touchscreen@2040000 {
+        compatible = "fsl,imx6ul-tsc";
+        reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6UL_CLK_IPG>,
+                 <&clks IMX6UL_CLK_ADC2>;
+        clock-names = "tsc", "adc";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_tsc>;
+        xnur-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+        measure-delay-time = <0xfff>;
+        pre-charge-time = <0xffff>;
+        touchscreen-average-samples = <32>;
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
new file mode 100644
index 000000000000..c40d92b7f4af
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Goodix Berlin series touchscreen controller
+
+description: The Goodix Berlin series of touchscreen controllers
+  be connected to either I2C or SPI buses.
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - goodix,gt9897
+      - goodix,gt9916
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply regulator on AVDD pin
+
+  vddio-supply:
+    description: power supply regulator on VDDIO pin
+
+  spi-max-frequency: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@5d {
+        compatible = "goodix,gt9916";
+        reg = <0x5d>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        avdd-supply = <&ts_avdd>;
+        touchscreen-size-x = <1024>;
+        touchscreen-size-y = <768>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      num-cs = <1>;
+      cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+      touchscreen@0 {
+        compatible = "goodix,gt9916";
+        reg = <0>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+        avdd-supply = <&ts_avdd>;
+        spi-max-frequency = <1000000>;
+        touchscreen-size-x = <1024>;
+        touchscreen-size-y = <768>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index 93f2ce3130ae..a96137c6f063 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Goodix GT9xx series touchscreen controller Bindings
+title: Goodix GT9xx series touchscreen controller
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - goodix,gt1151
+      - goodix,gt1158
       - goodix,gt5663
       - goodix,gt5688
       - goodix,gt911
@@ -36,8 +37,9 @@ properties:
     maxItems: 1
 
   irq-gpios:
-    description: GPIO pin used for IRQ. The driver uses the interrupt gpio pin
-      as output to reset the device.
+    description: GPIO pin used for IRQ input. Additionally, this line is
+      sampled by the device on reset deassertion to select the I2C client
+      address, thus it can be driven by the host during the reset sequence.
     maxItems: 1
 
   reset-gpios:
@@ -60,14 +62,13 @@ additionalProperties: false
 required:
   - compatible
   - reg
-  - interrupts
 
 examples:
   - |
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
-      gt928@5d {
+      touchscreen@5d {
         compatible = "goodix,gt928";
         reg = <0x5d>;
         interrupt-parent = <&gpio>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml
new file mode 100644
index 000000000000..f5cfacb5e966
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/himax,hx83112b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax hx83112b touchscreen controller
+
+maintainers:
+  - Job Noorman <job@noorman.info>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - himax,hx83100a
+      - himax,hx83112b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@48 {
+        compatible = "himax,hx83112b";
+        reg = <0x48>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <65 IRQ_TYPE_LEVEL_LOW>;
+        touchscreen-size-x = <1080>;
+        touchscreen-size-y = <2160>;
+        reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/himax,hx852es.yaml b/Documentation/devicetree/bindings/input/touchscreen/himax,hx852es.yaml
new file mode 100644
index 000000000000..40a60880111d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/himax,hx852es.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/himax,hx852es.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX852x(ES) touch panel controller
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - himax,hx8525e
+          - himax,hx8526e
+          - himax,hx8527e
+      - const: himax,hx852es
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Touch Screen Interrupt (TSIX), active low
+
+  reset-gpios:
+    maxItems: 1
+    description: External Reset (XRES), active low
+
+  vcca-supply:
+    description: Analog power supply (VCCA)
+
+  vccd-supply:
+    description: Digital power supply (VCCD)
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@48 {
+        compatible = "himax,hx8527e", "himax,hx852es";
+        reg = <0x48>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+        reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
+        vcca-supply = <&reg_ts_vcca>;
+        vccd-supply = <&pm8916_l6>;
+        linux,keycodes = <KEY_BACK KEY_HOMEPAGE KEY_APPSELECT>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
index 942562f1e45b..874c0781c476 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Hycon HY46XX series touchscreen controller bindings
+title: Hycon HY46XX series touchscreen controller
 
 description: |
   There are 6 variants of the chip for various touch panel sizes and cover lens material
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml
new file mode 100644
index 000000000000..72d4da636881
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cst816x.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hynitron,cst816x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hynitron CST816x Series Capacitive Touch controller
+
+maintainers:
+  - Oleh Kuzhylnyi <kuzhylol@gmail.com>
+
+description: |
+  Bindings for CST816x high performance self-capacitance touch chip series
+  with single point gesture and real two-point operation.
+
+properties:
+  compatible:
+    enum:
+      - hynitron,cst816s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  linux,keycodes:
+    minItems: 1
+    items:
+      - description: Slide up gesture
+      - description: Slide down gesture
+      - description: Slide left gesture
+      - description: Slide right gesture
+      - description: Long press gesture
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@15 {
+            compatible = "hynitron,cst816s";
+            reg = <0x15>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+            linux,keycodes = <KEY_UP>, <KEY_DOWN>, <KEY_LEFT>, <KEY_RIGHT>,
+                             <BTN_TOOL_TRIPLETAP>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml
new file mode 100644
index 000000000000..9cb5d4af00f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hynitron,cstxxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hynitron cstxxx series touchscreen controller
+
+description: |
+  Bindings for Hynitron cstxxx series multi-touch touchscreen
+  controllers.
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - hynitron,cst340
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@1a {
+        compatible = "hynitron,cst340";
+        reg = <0x1a>;
+        interrupt-parent = <&gpio4>;
+        interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+        touchscreen-size-x = <640>;
+        touchscreen-size-y = <480>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
index a190e7baac31..9f7328999756 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
@@ -15,6 +15,9 @@ allOf:
 properties:
   compatible:
     enum:
+      - ilitek,ili210x
+      - ilitek,ili2117
+      - ilitek,ili2120
       - ilitek,ili2130
       - ilitek,ili2131
       - ilitek,ili2132
@@ -22,11 +25,12 @@ properties:
       - ilitek,ili2322
       - ilitek,ili2323
       - ilitek,ili2326
+      - ilitek,ili251x
       - ilitek,ili2520
       - ilitek,ili2521
 
   reg:
-    const: 0x41
+    maxItems: 1
 
   interrupts:
     maxItems: 1
@@ -50,7 +54,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - reset-gpios
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
new file mode 100644
index 000000000000..0ef79343bf9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/imagis,ist3038c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagis IST30XXC family touchscreen controller
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^touchscreen@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - imagis,ist3032c
+      - imagis,ist3038
+      - imagis,ist3038b
+      - imagis,ist3038c
+      - imagis,ist3038h
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Power supply regulator for the chip
+
+  vddio-supply:
+    description: Power supply regulator for the I2C bus
+
+  linux,keycodes:
+    description: Keycodes for the touch keys
+    minItems: 2
+    maxItems: 5
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: imagis,ist3032c
+    then:
+      properties:
+        linux,keycodes: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@50 {
+        compatible = "imagis,ist3038c";
+        reg = <0x50>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vdd-supply = <&ldo1_reg>;
+        vddio-supply = <&ldo2_reg>;
+        touchscreen-size-x = <720>;
+        touchscreen-size-y = <1280>;
+        touchscreen-fuzz-x = <10>;
+        touchscreen-fuzz-y = <10>;
+        touchscreen-inverted-x;
+        touchscreen-inverted-y;
+      };
+    };
+  - |
+    #include <dt-bindings/input/linux-event-codes.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@50 {
+        compatible = "imagis,ist3032c";
+        reg = <0x50>;
+        interrupt-parent = <&gpio>;
+        interrupts = <72 IRQ_TYPE_EDGE_FALLING>;
+        vdd-supply = <&ldo2>;
+        touchscreen-size-x = <480>;
+        touchscreen-size-y = <800>;
+        linux,keycodes = <KEY_APPSELECT>, <KEY_BACK>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
deleted file mode 100644
index 164915004424..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Freescale i.MX6UL Touch Controller
-
-Required properties:
-- compatible: must be "fsl,imx6ul-tsc".
-- reg: this touch controller address and the ADC2 address.
-- interrupts: the interrupt of this touch controller and ADC2.
-- clocks: the root clock of touch controller and ADC2.
-- clock-names; must be "tsc" and "adc".
-- xnur-gpio: the X- gpio this controller connect to.
-  This xnur-gpio returns to low once the finger leave the touch screen (The
-  last touch event the touch controller capture).
-
-Optional properties:
-- measure-delay-time: the value of measure delay time.
-  Before X-axis or Y-axis measurement, the screen need some time before
-  even potential distribution ready.
-  This value depends on the touch screen.
-- pre-charge-time: the touch screen need some time to precharge.
-  This value depends on the touch screen.
-- touchscreen-average-samples: Number of data samples which are averaged for
-  each read. Valid values are 1, 4, 8, 16 and 32.
-
-Example:
-	tsc: tsc@2040000 {
-		compatible = "fsl,imx6ul-tsc";
-		reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX6UL_CLK_IPG>,
-			 <&clks IMX6UL_CLK_ADC2>;
-		clock-names = "tsc", "adc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tsc>;
-		xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-		measure-delay-time = <0xfff>;
-		pre-charge-time = <0xffff>;
-		touchscreen-average-samples = <32>;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt
deleted file mode 100644
index 41cbf4b7a670..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/lpc32xx-tsc.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* NXP LPC32xx SoC Touchscreen Controller (TSC)
-
-Required properties:
-- compatible: must be "nxp,lpc3220-tsc"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: The TSC/ADC interrupt
-
-Example:
-
-	tsc@40048000 {
-		compatible = "nxp,lpc3220-tsc";
-		reg = <0x40048000 0x1000>;
-		interrupt-parent = <&mic>;
-		interrupts = <39 0>;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
deleted file mode 100644
index 05e982c3454e..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/max11801-ts.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* MAXI MAX11801 Resistive touch screen controller with i2c interface
-
-Required properties:
-- compatible: must be "maxim,max11801"
-- reg: i2c slave address
-- interrupts: touch controller interrupt
-
-Example:
-
-&i2c1 {
-	max11801: touchscreen@48 {
-		compatible = "maxim,max11801";
-		reg = <0x48>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/maxim,max11801.yaml b/Documentation/devicetree/bindings/input/touchscreen/maxim,max11801.yaml
new file mode 100644
index 000000000000..4f528d220199
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/maxim,max11801.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/maxim,max11801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAXI MAX11801 Resistive touch screen controller with i2c interface
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: maxim,max11801
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+allOf:
+  - $ref: touchscreen.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@48 {
+            compatible = "maxim,max11801";
+            reg = <0x48>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
index 62366886fb3e..90ebd4f8354c 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/melfas,mms114.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Melfas MMS114 family touchscreen controller bindings
+title: Melfas MMS114 family touchscreen controller
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -17,13 +17,17 @@ properties:
     pattern: "^touchscreen(@.*)?$"
 
   compatible:
-    items:
+    oneOf:
       - enum:
           - melfas,mms114
           - melfas,mms134s
           - melfas,mms136
           - melfas,mms152
           - melfas,mms345l
+      - items:
+          - enum:
+              - melfas,mms252
+          - const: melfas,mms114
 
   reg:
     description: I2C address
@@ -52,6 +56,11 @@ properties:
   touchscreen-swapped-x-y: true
   touchscreen-max-pressure: true
 
+  linux,keycodes:
+    description: Keycodes for the touch keys
+    minItems: 1
+    maxItems: 15
+
 additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
index 3a42c23faf6f..ddbbc820c7e5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MStar msg2638 touchscreen controller Bindings
+title: MStar msg2638 touchscreen controller
 
 maintainers:
   - Vincent Knecht <vincent.knecht@mailoo.org>
@@ -14,7 +14,9 @@ allOf:
 
 properties:
   compatible:
-    const: mstar,msg2638
+    enum:
+      - mstar,msg2138
+      - mstar,msg2638
 
   reg:
     const: 0x26
@@ -34,6 +36,10 @@ properties:
   touchscreen-size-x: true
   touchscreen-size-y: true
 
+  linux,keycodes:
+    minItems: 1
+    maxItems: 4
+
 additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml
new file mode 100644
index 000000000000..c2ee89b76ea1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/neonode,zforce.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/neonode,zforce.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Neonode infrared touchscreen controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: neonode,zforce
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  irq-gpios:
+    maxItems: 1
+
+  x-size:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  y-size:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@50 {
+            compatible = "neonode,zforce";
+            reg = <0x50>;
+            interrupts = <2 0>;
+            vdd-supply = <&reg_zforce_vdd>;
+
+            reset-gpios = <&gpio5 9 0>; /* RST */
+            irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
+
+            touchscreen-min-x = <0>;
+            touchscreen-size-x = <800>;
+            touchscreen-min-y = <0>;
+            touchscreen-size-y = <600>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/novatek,nvt-ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/novatek,nvt-ts.yaml
new file mode 100644
index 000000000000..bd6a60486d1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/novatek,nvt-ts.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/novatek,nvt-ts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NVT Touchscreen Controller
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - novatek,nt11205-ts
+      - novatek,nt36672a-ts
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vcc-supply: true
+  iovcc-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@1 {
+            compatible = "novatek,nt36672a-ts";
+            reg = <0x01>;
+            interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+            vcc-supply = <&vreg_l22a_2p85>;
+            iovcc-supply = <&vreg_l14a_1p8>;
+            pinctrl-0 = <&ts_int_default &ts_reset_default>;
+            pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
+            pinctrl-names = "default", "sleep";
+            touchscreen-size-x = <1080>;
+            touchscreen-size-y = <2246>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/nxp,lpc3220-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/nxp,lpc3220-tsc.yaml
new file mode 100644
index 000000000000..b6feda127c7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/nxp,lpc3220-tsc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/nxp,lpc3220-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx SoC Touchscreen Controller (TSC)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: nxp,lpc3220-tsc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc32xx-clock.h>
+
+    touchscreen@40048000 {
+        compatible = "nxp,lpc3220-tsc";
+        reg = <0x40048000 0x1000>;
+        interrupt-parent = <&mic>;
+        interrupts = <39 0>;
+        clocks = <&clk LPC32XX_CLK_ADC>;
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
index f9998edbff70..3305eda5ed88 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/pixcir,pixcir_ts.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Pixcir Touchscreen Controller Device Tree Bindings
+title: Pixcir Touchscreen Controller
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt
deleted file mode 100644
index 2a1af240ccc3..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/raspberrypi,firmware-ts.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Raspberry Pi firmware based 7" touchscreen
-=====================================
-
-Required properties:
- - compatible: "raspberrypi,firmware-ts"
-
-Optional properties:
- - firmware: Reference to RPi's firmware device node
- - touchscreen-size-x: See touchscreen.txt
- - touchscreen-size-y: See touchscreen.txt
- - touchscreen-inverted-x: See touchscreen.txt
- - touchscreen-inverted-y: See touchscreen.txt
- - touchscreen-swapped-x-y: See touchscreen.txt
-
-Example:
-
-firmware: firmware-rpi {
-	compatible = "raspberrypi,bcm2835-firmware";
-	mboxes = <&mailbox>;
-
-	ts: touchscreen {
-		compatible = "raspberrypi,firmware-ts";
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
index 7fc22a403d48..059d419f6c1c 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.yaml
@@ -55,7 +55,7 @@ properties:
   touchscreen-min-pressure: true
   touchscreen-x-plate-ohms: true
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/input/touchscreen/rohm,bu21013.yaml b/Documentation/devicetree/bindings/input/touchscreen/rohm,bu21013.yaml
new file mode 100644
index 000000000000..adea2c4edf1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/rohm,bu21013.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/rohm,bu21013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rohm BU21013 touchscreen
+
+description:
+  Rohm BU21013 I2C driven touchscreen controller.
+
+maintainers:
+  - Dario Binacchi <dario.binacchi@amarulasolutions.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - rohm,bu21013_tp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  touch-gpios:
+    maxItems: 1
+    description: GPIO registering a touch event.
+
+  avdd-supply:
+    description: Analogic power supply
+
+  rohm,touch-max-x:
+    deprecated: true
+    description: Maximum value on the X axis.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  rohm,touch-max-y:
+    deprecated: true
+    description: Maximum value on the Y axis.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  rohm,flip-x:
+    deprecated: true
+    description: Flip touch coordinates on the X axis
+    type: boolean
+
+  rohm,flip-y:
+    deprecated: true
+    description: Flip touch coordinates on the Y axis
+    type: boolean
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@5c {
+            compatible = "rohm,bu21013_tp";
+            reg = <0x5c>;
+
+            interrupt-parent = <&gpio2>;
+            interrupts = <0x20 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+            touch-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+            avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+            touchscreen-size-x = <384>;
+            touchscreen-size-y = <704>;
+            touchscreen-inverted-y;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
deleted file mode 100644
index 6805d10d226d..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Samsung S6SY761 touchscreen controller
-
-Required properties:
-- compatible		: must be "samsung,s6sy761"
-- reg			: I2C slave address, (e.g. 0x48)
-- interrupts		: interrupt specification
-- avdd-supply		: analogic power supply
-- vdd-supply		: power supply
-
-Optional properties:
-- touchscreen-size-x	: see touchscreen.txt. This property is embedded in the
-			  device. If defined it forces a different x resolution.
-- touchscreen-size-y	: see touchscreen.txt. This property is embedded in the
-			  device. If defined it forces a different y resolution.
-
-Example:
-
-i2c@00000000 {
-
-	/* ... */
-
-	touchscreen@48 {
-		compatible = "samsung,s6sy761";
-		reg = <0x48>;
-		interrupt-parent = <&gpa1>;
-		interrupts = <1 IRQ_TYPE_NONE>;
-		avdd-supply = <&ldo30_reg>;
-		vdd-supply = <&ldo31_reg>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml
new file mode 100644
index 000000000000..1ffd17af3c53
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/samsung,s6sy761.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6SY761 touchscreen controller
+
+maintainers:
+  - Andi Shyti <andi.shyti@kernel.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6sy761
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply: true
+  vdd-supply: true
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - vdd-supply
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@48 {
+            compatible = "samsung,s6sy761";
+            reg = <0x48>;
+            interrupt-parent = <&gpa1>;
+            interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+            avdd-supply = <&ldo30_reg>;
+            vdd-supply = <&ldo31_reg>;
+            touchscreen-size-x = <4096>;
+            touchscreen-size-y = <4096>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/semtech,sx8654.yaml b/Documentation/devicetree/bindings/input/touchscreen/semtech,sx8654.yaml
new file mode 100644
index 000000000000..b2554064b688
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/semtech,sx8654.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/semtech,sx8654.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech SX8654 I2C Touchscreen Controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - semtech,sx8650
+      - semtech,sx8654
+      - semtech,sx8655
+      - semtech,sx8656
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@48 {
+            compatible = "semtech,sx8654";
+            reg = <0x48>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+            reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
index eec6f7f6f0a3..5381a96f4949 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/silead,gsl1680.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Silead GSL1680 Touchscreen Controller Device Tree Bindings
+title: Silead GSL1680 Touchscreen Controller
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
@@ -31,7 +31,7 @@ properties:
     maxItems: 1
 
   firmware-name:
-    $ref: /schemas/types.yaml#/definitions/string
+    maxItems: 1
     description: >
       File basename for board specific firmware
 
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
index 1d8ca19fd37a..e7ee7a0d74c4 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix,st1232.yaml
@@ -37,6 +37,7 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/input/linux-event-codes.h>
     i2c {
             #address-cells = <1>;
             #size-cells = <0>;
@@ -46,5 +47,33 @@ examples:
                     reg = <0x55>;
                     interrupts = <2 0>;
                     gpios = <&gpio1 166 0>;
+
+                    touch-overlay {
+                            segment-0 {
+                                    label = "Touchscreen";
+                                    x-origin = <0>;
+                                    x-size = <240>;
+                                    y-origin = <40>;
+                                    y-size = <280>;
+                            };
+
+                            segment-1a {
+                                    label = "Camera light";
+                                    linux,code = <KEY_LIGHTS_TOGGLE>;
+                                    x-origin = <40>;
+                                    x-size = <40>;
+                                    y-origin = <0>;
+                                    y-size = <40>;
+                            };
+
+                            segment-2a {
+                                    label = "Power";
+                                    linux,code = <KEY_POWER>;
+                                    x-origin = <160>;
+                                    x-size = <40>;
+                                    y-origin = <0>;
+                                    y-size = <40>;
+                            };
+                    };
             };
     };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
deleted file mode 100644
index 0a5d0cb4a280..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* ST-Microelectronics FingerTip touchscreen controller
-
-The ST-Microelectronics FingerTip device provides a basic touchscreen
-functionality. Along with it the user can enable the touchkey which can work as
-a basic HOME and BACK key for phones.
-
-The driver supports also hovering as an absolute single touch event with x, y, z
-coordinates.
-
-Required properties:
-- compatible		: must be "st,stmfts"
-- reg			: I2C slave address, (e.g. 0x49)
-- interrupts		: interrupt specification
-- avdd-supply		: analogic power supply
-- vdd-supply		: power supply
-- touchscreen-size-x	: see touchscreen.txt
-- touchscreen-size-y	: see touchscreen.txt
-
-Optional properties:
-- touch-key-connected	: specifies whether the touchkey feature is connected
-- ledvdd-supply		: power supply to the touch key leds
-
-Example:
-
-i2c@00000000 {
-
-	/* ... */
-
-	touchscreen@49 {
-		compatible = "st,stmfts";
-		reg = <0x49>;
-		interrupt-parent = <&gpa1>;
-		interrupts = <1 IRQ_TYPE_NONE>;
-		touchscreen-size-x = <1599>;
-		touchscreen-size-y = <2559>;
-		touch-key-connected;
-		avdd-supply = <&ldo30_reg>;
-		vdd-supply = <&ldo31_reg>;
-		ledvdd-supply = <&ldo33_reg>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
new file mode 100644
index 000000000000..12256ae7df90
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/st,stmfts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Microelectronics FingerTip touchscreen controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  The ST-Microelectronics FingerTip device provides a basic touchscreen
+  functionality. Along with it the user can enable the touchkey which can work
+  as a basic HOME and BACK key for phones.
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: st,stmfts
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analogic power supply
+
+  interrupts:
+    maxItems: 1
+
+  ledvdd-supply:
+    description: Power supply to the touch key leds
+
+  touch-key-connected:
+    type: boolean
+    description: The touchkey feature is connected
+
+  vdd-supply:
+    description: Power supply
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - interrupts
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@49 {
+            compatible = "st,stmfts";
+            reg = <0x49>;
+            interrupt-parent = <&gpa1>;
+            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+            touchscreen-size-x = <1599>;
+            touchscreen-size-y = <2559>;
+            touch-key-connected;
+            avdd-supply = <&ldo30_reg>;
+            vdd-supply = <&ldo31_reg>;
+            ledvdd-supply = <&ldo33_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
deleted file mode 100644
index c549924603d2..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
+++ /dev/null
@@ -1,109 +0,0 @@
-STMPE Touchscreen
-----------------
-
-Required properties:
- - compatible: "st,stmpe-ts"
-
-Optional properties:
-- st,ave-ctrl		: Sample average control
-				0 -> 1 sample
-				1 -> 2 samples
-				2 -> 4 samples
-				3 -> 8 samples
-- st,touch-det-delay	: Touch detect interrupt delay (recommended is 3)
-				0 -> 10 us
-				1 -> 50 us
-				2 -> 100 us
-				3 -> 500 us
-				4 -> 1 ms
-				5 -> 5 ms
-				6 -> 10 ms
-				7 -> 50 ms
-- st,settling		: Panel driver settling time (recommended is 2)
-				0 -> 10 us
-				1 -> 100 us
-				2 -> 500 us
-				3 -> 1 ms
-				4 -> 5 ms
-				5 -> 10 ms
-				6 -> 50 ms
-				7 -> 100 ms
-- st,fraction-z		: Length of the fractional part in z (recommended is 7)
-			  (fraction-z ([0..7]) = Count of the fractional part)
-- st,i-drive		: current limit value of the touchscreen drivers
-				0 -> 20 mA (typical 35mA max)
-				1 -> 50 mA (typical 80 mA max)
-
-Optional properties common with MFD (deprecated):
- - st,sample-time	: ADC conversion time in number of clock.
-				0 -> 36 clocks
-				1 -> 44 clocks
-				2 -> 56 clocks
-				3 -> 64 clocks
-				4 -> 80 clocks (recommended)
-				5 -> 96 clocks
-				6 -> 124 clocks
- - st,mod-12b		: ADC Bit mode
-				0 -> 10bit ADC
-				1 -> 12bit ADC
- - st,ref-sel		: ADC reference source
-				0 -> internal
-				1 -> external
- - st,adc-freq		: ADC Clock speed
-				0 -> 1.625 MHz
-				1 -> 3.25 MHz
-				2 || 3 -> 6.5 MHz
-
-Node name must be stmpe_touchscreen and should be child node of stmpe node to
-which it belongs.
-
-Note that common ADC settings of stmpe_touchscreen (child) will take precedence
-over the settings done in MFD.
-
-Example:
-
-stmpe811@41 {
-	compatible = "st,stmpe811";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_touch_int>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x41>;
-	interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-parent = <&gpio4>;
-	interrupt-controller;
-	id = <0>;
-	blocks = <0x5>;
-	irq-trigger = <0x1>;
-	/* Common ADC settings */
-	/* 3.25 MHz ADC clock speed */
-	st,adc-freq = <1>;
-	/* 12-bit ADC */
-	st,mod-12b = <1>;
-	/* internal ADC reference */
-	st,ref-sel = <0>;
-	/* ADC converstion time: 80 clocks */
-	st,sample-time = <4>;
-
-	stmpe_touchscreen {
-		compatible = "st,stmpe-ts";
-		reg = <0>;
-		/* 8 sample average control */
-		st,ave-ctrl = <3>;
-		/* 5 ms touch detect interrupt delay */
-		st,touch-det-delay = <5>;
-		/* 1 ms panel driver settling time */
-		st,settling = <3>;
-		/* 7 length fractional part in z */
-		st,fraction-z = <7>;
-		/*
-		 * 50 mA typical 80 mA max touchscreen drivers
-		 * current limit value
-		 */
-		st,i-drive = <1>;
-	};
-	stmpe_adc {
-		compatible = "st,stmpe-adc";
-		st,norequest-mask = <0x0F>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt b/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
deleted file mode 100644
index 0ebe6dd043c7..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/sx8654.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Semtech SX8654 I2C Touchscreen Controller
-
-Required properties:
-- compatible: must be one of the following, depending on the model:
-	"semtech,sx8650"
-	"semtech,sx8654"
-	"semtech,sx8655"
-	"semtech,sx8656"
-- reg: i2c slave address
-- interrupts: touch controller interrupt
-
-Optional properties:
- - reset-gpios: GPIO specification for the NRST input
-
-Example:
-
-	sx8654@48 {
-		compatible = "semtech,sx8654";
-		reg = <0x48>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
new file mode 100644
index 000000000000..8f6335d7da1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,ads7843.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,ads7843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI's SPI driven touch screen controllers
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+  - Marek Vasut <marex@denx.de>
+
+description:
+  TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046 SPI driven touch screen
+  controllers.
+
+properties:
+  compatible:
+    enum:
+      - ti,ads7843
+      - ti,ads7845
+      - ti,ads7846
+      - ti,ads7873
+      - ti,tsc2046
+
+  interrupts:
+    maxItems: 1
+
+  pendown-gpio:
+    maxItems: 1
+    description:
+      GPIO handle describing the pin the !PENIRQ line is connected to.
+
+  vcc-supply:
+    description:
+      A regulator node for the supply voltage.
+
+  wakeup-source: true
+
+  ti,debounce-max:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Max number of additional readings per sample.
+
+  ti,debounce-rep:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Additional consecutive good readings required after the first two.
+
+  ti,debounce-tol:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Tolerance used for filtering.
+
+  ti,hsync-gpios:
+    maxItems: 1
+    description:
+      GPIO line to poll for hsync.
+
+  ti,keep-vref-on:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set to keep Vref on for differential measurements as well.
+
+  ti,pendown-gpio-debounce:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Platform specific debounce time for the pendown-gpio.
+
+  ti,penirq-recheck-delay-usecs:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      If set to non-zero, after samples are taken this delay is applied and
+      penirq is rechecked, to help avoid false events.  This value is
+      affected by the material used to build the touch layer.
+
+  ti,pressure-max:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Maximum reported pressure value.
+
+  ti,pressure-min:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Minimum reported pressure value (threshold).
+
+  ti,settle-delay-usec:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Settling time of the analog signals; a function of Vcc and the
+      capacitance on the X/Y drivers.  If set to non-zero, two samples are
+      taken with settle_delay us apart, and the second one is used. ~150
+      uSec with 0.01uF caps.
+
+  ti,swap-xy:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Swap x and y axis.
+
+  ti,vref-delay-usecs:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Vref supply delay in usecs, 0 for external Vref.
+
+  ti,vref-mv:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      The VREF voltage, in millivolts.
+      Set to 0 to use internal references (ADS7846).
+
+  ti,x-plate-ohms:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Resistance of the X-plate, in Ohms.
+
+  ti,x-max:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Maximum value on the X axis.
+
+  ti,x-min:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Minimum value on the X axis.
+
+  ti,y-plate-ohms:
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Resistance of the Y-plate, in Ohms.
+
+  ti,y-max:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Maximum value on the Y axis.
+
+  ti,y-min:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint16
+    description:
+      Minimum value on the Y axis.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi{
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@0 {
+            compatible = "ti,tsc2046";
+            reg = <0>;	/* CS0 */
+            interrupt-parent = <&gpio1>;
+            interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
+            pendown-gpio = <&gpio1 8 0>;
+            spi-max-frequency = <1000000>;
+            vcc-supply = <&reg_vcc3>;
+            wakeup-source;
+
+            ti,pressure-max = /bits/ 16 <255>;
+            ti,x-max = /bits/ 16 <8000>;
+            ti,x-min = /bits/ 16 <0>;
+            ti,x-plate-ohms = /bits/ 16 <40>;
+            ti,y-max = /bits/ 16 <4800>;
+            ti,y-min = /bits/ 16 <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
index 938aab016cc2..7187c390b2f5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments TSC2004 and TSC2005 touchscreen controller bindings
+title: Texas Instruments TSC2004 and TSC2005 touchscreen controller
 
 maintainers:
   - Marek Vasut <marex@denx.de>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2007.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2007.yaml
new file mode 100644
index 000000000000..a595df3ea802
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2007.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2007.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments tsc2007 touchscreen controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: ti,tsc2007
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,x-plate-ohms:
+    description: X-plate resistance in ohms.
+
+  gpios: true
+
+  pendown-gpio: true
+
+  wakeup-source: true
+
+  ti,max-rt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: maximum pressure.
+
+  ti,fuzzx:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      specifies the absolute input fuzz x value.
+      If set, it will permit noise in the data up to +- the value given to the fuzz
+      parameter, that is used to filter noise from the event stream.
+
+  ti,fuzzy:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: specifies the absolute input fuzz y value.
+
+  ti,fuzzz:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: specifies the absolute input fuzz z value.
+
+  ti,poll-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      how much time to wait (in milliseconds) before reading again the
+      values from the tsc2007.
+
+required:
+  - compatible
+  - reg
+  - ti,x-plate-ohms
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touch@49 {
+           compatible = "ti,tsc2007";
+           reg = <0x49>;
+           interrupt-parent = <&gpio4>;
+           interrupts = <0x0 0x8>;
+           gpios = <&gpio4 0 0>;
+           ti,x-plate-ohms = <180>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml
new file mode 100644
index 000000000000..5094c5183c74
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/toradex,vf50-touchscreen.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/toradex,vf50-touchscreen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toradex Colibri VF50 Touchscreen
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+  - Sanchayan Maity <maitysanchayan@gmail.com>
+
+properties:
+  compatible:
+    const: toradex,vf50-touchscreen
+
+  interrupts:
+    maxItems: 1
+
+  io-channels:
+    maxItems: 4
+    description:
+      adc channels being used by the Colibri VF50 module
+      IIO ADC for Y-, X-, Y+, X+ connections
+
+  xp-gpios:
+    description: FET gate driver for input of X+
+
+  xm-gpios:
+    description: FET gate driver for input of X-
+
+  yp-gpios:
+    description: FET gate driver for input of Y+
+
+  ym-gpios:
+    description: FET gate driver for input of Y-
+
+  vf50-ts-min-pressure:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 50
+    maximum: 2000
+    description: pressure level at which to stop measuring X/Y values
+
+required:
+  - compatible
+  - io-channels
+  - xp-gpios
+  - xm-gpios
+  - yp-gpios
+  - ym-gpios
+  - interrupts
+  - vf50-ts-min-pressure
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    touchscreen {
+        compatible = "toradex,vf50-touchscreen";
+        interrupt-parent = <&gpio0>;
+        interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+        io-channels = <&adc1 0>, <&adc0 0>, <&adc0 1>, <&adc1 2>;
+        xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+        xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+        yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+        ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+        pinctrl-names = "idle", "default";
+        pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+        pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>;
+        vf50-ts-min-pressure = <200>;
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
deleted file mode 100644
index e1adb902d503..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
+++ /dev/null
@@ -1 +0,0 @@
-See touchscreen.yaml
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
index 4b5b212c772c..7023e8c73a7b 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@@ -4,12 +4,19 @@
 $id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common touchscreen Bindings
+title: Common touchscreen
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
 
 properties:
+  panel:
+    description: If this touchscreen is integrally connected to a panel, this
+      is a reference to that panel. The presence of this reference indicates
+      that the touchscreen should be power sequenced together with the panel
+      and that they may share power and/or reset signals.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   touchscreen-min-x:
     description: minimum x coordinate reported
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -80,6 +87,129 @@ properties:
   touchscreen-y-plate-ohms:
     description: Resistance of the Y-plate in Ohms
 
+  touch-overlay:
+    description: |
+      List of nodes defining segments (touch areas) on the touchscreen.
+
+      This object can be used to describe a series of segments to restrict
+      the region within touch events are reported or buttons with a specific
+      functionality.
+
+      This is of special interest if the touchscreen is shipped with a physical
+      overlay on top of it with a frame that hides some part of the original
+      touchscreen area. Printed buttons on that overlay are also a typical
+      use case.
+
+      A new touchscreen area is defined as a sub-node without a key code. If a
+      key code is defined in the sub-node, it will be interpreted as a button.
+
+      The x-origin and y-origin properties of a touchscreen area define the
+      offset of a new origin from where the touchscreen events are referenced.
+      This offset is applied to the events accordingly. The x-size and y-size
+      properties define the size of the touchscreen effective area.
+
+      The following example shows a new touchscreen area with the new origin
+      (0',0') for the touch events generated by the device.
+
+                   Touchscreen (full area)
+         ┌────────────────────────────────────────┐
+         │    ┌───────────────────────────────┐   │
+         │    │                               │   │
+         │    ├ y-size                        │   │
+         │    │                               │   │
+         │    │       touchscreen area        │   │
+         │    │         (no key code)         │   │
+         │    │                               │   │
+         │    │            x-size             │   │
+         │   ┌└──────────────┴────────────────┘   │
+         │(0',0')                                 │
+        ┌└────────────────────────────────────────┘
+      (0,0)
+
+      where (0',0') = (0+x-origin,0+y-origin)
+
+      Sub-nodes with key codes report the touch events on their surface as key
+      events instead.
+
+      The following example shows a touchscreen with a single button on it.
+
+              Touchscreen (full area)
+        ┌───────────────────────────────────┐
+        │                                   │
+        │                                   │
+        │   ┌─────────┐                     │
+        │   │button 0 │                     │
+        │   │KEY_POWER│                     │
+        │   └─────────┘                     │
+        │                                   │
+        │                                   │
+       ┌└───────────────────────────────────┘
+      (0,0)
+
+      Segments defining buttons and clipped toushcreen areas can be combined
+      as shown in the following example.
+      In that case only the events within the touchscreen area are reported
+      as touch events. Events within the button areas report their associated
+      key code. Any events outside the defined areas are ignored.
+
+                  Touchscreen (full area)
+        ┌─────────┬──────────────────────────────┐
+        │         │                              │
+        │         │    ┌───────────────────────┐ │
+        │ button 0│    │                       │ │
+        │KEY_POWER│    │                       │ │
+        │         │    │                       │ │
+        ├─────────┤    │   touchscreen area    │ │
+        │         │    │     (no key code)     │ │
+        │         │    │                       │ │
+        │ button 1│    │                       │ │
+        │ KEY_INFO│   ┌└───────────────────────┘ │
+        │         │(0',0')                       │
+       ┌└─────────┴──────────────────────────────┘
+      (0,0)
+
+    type: object
+
+    patternProperties:
+      '^segment-':
+        type: object
+        description:
+          Each segment is represented as a sub-node.
+        properties:
+          x-origin:
+            description: horizontal origin of the node area
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          y-origin:
+            description: vertical origin of the node area
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          x-size:
+            description: horizontal resolution of the node area
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          y-size:
+            description: vertical resolution of the node area
+            $ref: /schemas/types.yaml#/definitions/uint32
+
+          label:
+            description: descriptive name of the segment
+            $ref: /schemas/types.yaml#/definitions/string
+
+          linux,code: true
+
+        required:
+          - x-origin
+          - y-origin
+          - x-size
+          - y-size
+
+        unevaluatedProperties: false
+
+  debounce-delay-us:
+    description: Minimum duration in microseconds a signal must remain stable
+      to be considered valid.
+
 dependencies:
   touchscreen-size-x: [ touchscreen-size-y ]
   touchscreen-size-y: [ touchscreen-size-x ]
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
deleted file mode 100644
index ed00f61b8c08..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/tsc2007.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-* Texas Instruments tsc2007 touchscreen controller
-
-Required properties:
-- compatible: must be "ti,tsc2007".
-- reg: I2C address of the chip.
-- ti,x-plate-ohms: X-plate resistance in ohms.
-
-Optional properties:
-- gpios: the interrupt gpio the chip is connected to (trough the penirq pin).
-  The penirq pin goes to low when the panel is touched.
-  (see GPIO binding[1] for more details).
-- interrupts: (gpio) interrupt to which the chip is connected
-  (see interrupt binding[0]).
-- ti,max-rt: maximum pressure.
-- ti,fuzzx: specifies the absolute input fuzz x value.
-  If set, it will permit noise in the data up to +- the value given to the fuzz
-  parameter, that is used to filter noise from the event stream.
-- ti,fuzzy: specifies the absolute input fuzz y value.
-- ti,fuzzz: specifies the absolute input fuzz z value.
-- ti,poll-period: how much time to wait (in milliseconds) before reading again the
-  values from the tsc2007.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
-	&i2c1 {
-		/* ... */
-		tsc2007@49 {
-			compatible = "ti,tsc2007";
-			reg = <0x49>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <0x0 0x8>;
-			gpios = <&gpio4 0 0>;
-			ti,x-plate-ohms = <180>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zeitec,zet6223.yaml b/Documentation/devicetree/bindings/input/touchscreen/zeitec,zet6223.yaml
new file mode 100644
index 000000000000..d5e132ec0273
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zeitec,zet6223.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/zeitec,zet6223.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zeitec ZET6223 touchscreen controller
+
+description:
+  Zeitec ZET6223 I2C driven touchscreen controller.
+
+maintainers:
+  - Dario Binacchi <dario.binacchi@amarulasolutions.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - zeitec,zet6223
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vio-supply:
+    description: 1.8V or 3.3V VIO supply.
+
+  vcc-supply:
+    description: 3.3V VCC supply.
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@76 {
+            compatible = "zeitec,zet6223";
+            reg = <0x76>;
+            interrupt-parent = <&pio>;
+            interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt b/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
deleted file mode 100644
index 27d55a506f18..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/zet6223.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Zeitec ZET6223 I2C touchscreen controller
-
-Required properties:
-- compatible		  : "zeitec,zet6223"
-- reg			  : I2C slave address of the chip (0x76)
-- interrupts		  : interrupt specification for the zet6223 interrupt
-
-Optional properties:
-
-- vio-supply		  : Specification for VIO supply (1.8V or 3.3V,
-			    depending on system interface needs).
-- vcc-supply		  : Specification for 3.3V VCC supply.
-- touchscreen-size-x	  : See touchscreen.txt
-- touchscreen-size-y	  : See touchscreen.txt
-- touchscreen-inverted-x  : See touchscreen.txt
-- touchscreen-inverted-y  : See touchscreen.txt
-- touchscreen-swapped-x-y : See touchscreen.txt
-
-Example:
-
-i2c@00000000 {
-
-	zet6223: touchscreen@76 {
-		compatible = "zeitec,zet6223";
-		reg = <0x76>;
-		interrupt-parent = <&pio>;
-		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
deleted file mode 100644
index e3c27c4fd9c8..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* Neonode infrared touchscreen controller
-
-Required properties:
-- compatible: must be "neonode,zforce"
-- reg: I2C address of the chip
-- interrupts: interrupt to which the chip is connected
-- reset-gpios: reset gpio the chip is connected to
-- x-size: horizontal resolution of touchscreen
-- y-size: vertical resolution of touchscreen
-
-Optional properties:
-- irq-gpios : interrupt gpio the chip is connected to
-- vdd-supply: Regulator controlling the controller supply
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		zforce_ts@50 {
-			compatible = "neonode,zforce";
-			reg = <0x50>;
-			interrupts = <2 0>;
-			vdd-supply = <&reg_zforce_vdd>;
-
-			reset-gpios = <&gpio5 9 0>; /* RST */
-			irq-gpios = <&gpio5 6 0>; /* IRQ, optional */
-
-			x-size = <800>;
-			y-size = <600>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
new file mode 100644
index 000000000000..3f663ce3e44e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/zinitix,bt400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zinitix BT4xx and BT5xx series touchscreen controller
+
+description: The Zinitix BT4xx and BT5xx series of touchscreen controllers
+  are Korea-produced touchscreens with embedded microcontrollers. The
+  BT4xx series was produced 2010-2013 and the BT5xx series 2013-2014.
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - $ref: ../input.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    enum:
+      - zinitix,bt402
+      - zinitix,bt403
+      - zinitix,bt404
+      - zinitix,bt412
+      - zinitix,bt413
+      - zinitix,bt431
+      - zinitix,bt432
+      - zinitix,bt531
+      - zinitix,bt532
+      - zinitix,bt538
+      - zinitix,bt541
+      - zinitix,bt548
+      - zinitix,bt554
+      - zinitix,at100
+
+  reg:
+    description: I2C address on the I2C bus
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host when using
+      the device on the I2C bus
+    minimum: 0
+    maximum: 400000
+
+  interrupts:
+    description: Interrupt to host
+    maxItems: 1
+
+  vcca-supply:
+    description: Analog power supply regulator on the VCCA pin
+
+  vdd-supply:
+    description: Digital power supply regulator on the VDD pin.
+      In older device trees this can be the accidental name for the analog
+      supply on the VCCA pin, and in that case the deprecated vddo-supply is
+      used for the digital power supply.
+
+  vddo-supply:
+    description: Deprecated name for the digital power supply, use vdd-supply
+      as this reflects the real name of the pin. If this supply is present,
+      the vdd-supply represents VCCA instead of VDD. Implementers should first
+      check for this property, and if it is present assume that the vdd-supply
+      represents the analog supply.
+    deprecated: true
+
+  reset-gpios:
+    description: Reset line for the touchscreen, should be tagged
+      as GPIO_ACTIVE_LOW
+
+  zinitix,mode:
+    description: Mode of reporting touch points. Some modes may not work
+      with a particular ts firmware for unknown reasons. Available modes are
+      1 and 2. Mode 2 is the default and preferred.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  linux,keycodes:
+    description:
+      This property specifies an array of keycodes assigned to the
+      touch-keys that can be present in some touchscreen configurations.
+      If the touch-keys are enabled, controller firmware will assign some
+      touch sense lines to those keys.
+    minItems: 1
+    maxItems: 8
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@20 {
+        compatible = "zinitix,bt541";
+        reg = <0x20>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vcca-supply = <&reg_vcca_tsp>;
+        vdd-supply = <&reg_vdd_tsp>;
+        touchscreen-size-x = <540>;
+        touchscreen-size-y = <960>;
+        zinitix,mode = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
deleted file mode 100644
index 446efb9f5f55..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Device tree bindings for Zinitx BT541 touchscreen controller
-
-Required properties:
-
- - compatible		: Should be "zinitix,bt541"
- - reg			: I2C address of the chip. Should be 0x20
- - interrupts		: Interrupt to which the chip is connected
-
-Optional properties:
-
- - vdd-supply		: Analog power supply regulator on VCCA pin
- - vddo-supply		: Digital power supply regulator on VDD pin
- - zinitix,mode		: Mode of reporting touch points. Some modes may not work
-			  with a particular ts firmware for unknown reasons. Available
-			  modes are 1 and 2. Mode 2 is the default and preferred.
-
-The touchscreen-* properties are documented in touchscreen.txt in this
-directory.
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		bt541@20 {
-			compatible = "zinitix,bt541";
-			reg = <0x20>;
-			interrupt-parent = <&msmgpio>;
-			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&tsp_default>;
-			vdd-supply = <&reg_vdd_tsp>;
-			vddo-supply = <&pm8916_l6>;
-			touchscreen-size-x = <540>;
-			touchscreen-size-y = <960>;
-			zinitix,mode = <2>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt b/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
deleted file mode 100644
index f5021214edec..000000000000
--- a/Documentation/devicetree/bindings/input/twl4030-pwrbutton.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Texas Instruments TWL family (twl4030) pwrbutton module
-
-This module is part of the TWL4030. For more details about the whole
-chip see Documentation/devicetree/bindings/mfd/twl-family.txt.
-
-This module provides a simple power button event via an Interrupt.
-
-Required properties:
-- compatible: should be one of the following
-   - "ti,twl4030-pwrbutton": For controllers compatible with twl4030
-- interrupts: should be one of the following
-   - <8>: For controllers compatible with twl4030
-
-Example:
-
-&twl {
-	twl_pwrbutton: pwrbutton {
-		compatible = "ti,twl4030-pwrbutton";
-		interrupts = <8>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt
deleted file mode 100644
index 43ef770dfeb9..000000000000
--- a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Zodiac Inflight Innovations RAVE Supervisory Processor Power Button Bindings
-
-RAVE SP input device is a "MFD cell" device corresponding to power
-button functionality of RAVE Supervisory Processor. It is expected
-that its Device Tree node is specified as a child of the node
-corresponding to the parent RAVE SP device (as documented in
-Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
-
-Required properties:
-
-- compatible: Should be "zii,rave-sp-pwrbutton"
-
-Example:
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-
-		pwrbutton {
-			compatible = "zii,rave-sp-pwrbutton";
-		};
-	}
diff --git a/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml
new file mode 100644
index 000000000000..b26e6fe174f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/zii,rave-sp-pwrbutton.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/zii,rave-sp-pwrbutton.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE Supervisory Processor Power Button
+
+maintainers:
+  - Frank Li <Frank.li@nxp.com>
+
+description:
+  RAVE SP input device is a "MFD cell" device corresponding to power
+  button functionality of RAVE Supervisory Processor. It is expected
+  that its Device Tree node is specified as a child of the node
+  corresponding to the parent RAVE SP device (as documented in
+  Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml)
+
+properties:
+  compatible:
+    const: zii,rave-sp-pwrbutton
+
+required:
+  - compatible
+
+allOf:
+  - $ref: input.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pwrbutton {
+        compatible = "zii,rave-sp-pwrbutton";
+    };
+
diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
index b8204ed22dd5..fc21fe3e7b37 100644
--- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
+++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Generic i.MX bus frequency device
 
 maintainers:
-  - Leonard Crestez <leonard.crestez@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
 
 description: |
   The i.MX SoC family has multiple buses for which clock frequency (and
@@ -26,14 +26,16 @@ properties:
     oneOf:
       - items:
           - enum:
-              - fsl,imx8mn-nic
               - fsl,imx8mm-nic
+              - fsl,imx8mn-nic
+              - fsl,imx8mp-nic
               - fsl,imx8mq-nic
           - const: fsl,imx8m-nic
       - items:
           - enum:
-              - fsl,imx8mn-noc
               - fsl,imx8mm-noc
+              - fsl,imx8mn-noc
+              - fsl,imx8mp-noc
               - fsl,imx8mq-noc
           - const: fsl,imx8m-noc
       - const: fsl,imx8m-nic
@@ -45,10 +47,11 @@ properties:
     maxItems: 1
 
   operating-points-v2: true
-  opp-table: true
+  opp-table:
+    type: object
 
   fsl,ddrc:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to DDR Controller.
 
diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
new file mode 100644
index 000000000000..4d72525f407e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/mediatek,cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Cache Coherent Interconnect (CCI) frequency and voltage scaling
+
+maintainers:
+  - Jia-Wei Chang <jia-wei.chang@mediatek.com>
+  - Johnson Wang <johnson.wang@mediatek.com>
+
+description: |
+  MediaTek Cache Coherent Interconnect (CCI) is a hardware engine used by
+  MT8183 and MT8186 SoCs to scale the frequency and adjust the voltage in
+  hardware. It can also optimize the voltage to reduce the power consumption.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-cci
+          - mediatek,mt8186-cci
+      - items:
+          - enum:
+              - mediatek,mt7988-cci
+          - const: mediatek,mt8183-cci
+
+  clocks:
+    items:
+      - description:
+          The multiplexer for clock input of the bus.
+      - description:
+          A parent of "bus" clock which is used as an intermediate clock source
+          when the original clock source (PLL) is under transition and not
+          stable yet.
+
+  clock-names:
+    items:
+      - const: cci
+      - const: intermediate
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  proc-supply:
+    description:
+      Phandle of the regulator for CCI that provides the supply voltage.
+
+  sram-supply:
+    description:
+      Phandle of the regulator for sram of CCI that provides the supply
+      voltage. When it is present, the implementation needs to do
+      "voltage tracking" to step by step scale up/down Vproc and Vsram to fit
+      SoC specific needs. When absent, the voltage scaling flow is handled by
+      hardware, hence no software "voltage tracking" is needed.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - operating-points-v2
+  - proc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    cci: cci {
+        compatible = "mediatek,mt8183-cci";
+        clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+                 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+        clock-names = "cci", "intermediate";
+        operating-points-v2 = <&cci_opp>;
+        proc-supply = <&mt6358_vproc12_reg>;
+    };
+
+    cci_opp: opp-table-cci {
+        compatible = "operating-points-v2";
+        opp-shared;
+        opp2_00: opp-273000000 {
+            opp-hz = /bits/ 64 <273000000>;
+            opp-microvolt = <650000>;
+        };
+        opp2_01: opp-338000000 {
+            opp-hz = /bits/ 64 <338000000>;
+            opp-microvolt = <687500>;
+        };
+        opp2_02: opp-403000000 {
+            opp-hz = /bits/ 64 <403000000>;
+            opp-microvolt = <718750>;
+        };
+        opp2_03: opp-463000000 {
+            opp-hz = /bits/ 64 <463000000>;
+            opp-microvolt = <756250>;
+        };
+        opp2_04: opp-546000000 {
+            opp-hz = /bits/ 64 <546000000>;
+            opp-microvolt = <800000>;
+        };
+        opp2_05: opp-624000000 {
+            opp-hz = /bits/ 64 <624000000>;
+            opp-microvolt = <818750>;
+        };
+        opp2_06: opp-689000000 {
+            opp-hz = /bits/ 64 <689000000>;
+            opp-microvolt = <850000>;
+        };
+        opp2_07: opp-767000000 {
+            opp-hz = /bits/ 64 <767000000>;
+            opp-microvolt = <868750>;
+        };
+        opp2_08: opp-845000000 {
+            opp-hz = /bits/ 64 <845000000>;
+            opp-microvolt = <893750>;
+        };
+        opp2_09: opp-871000000 {
+            opp-hz = /bits/ 64 <871000000>;
+            opp-microvolt = <906250>;
+        };
+        opp2_10: opp-923000000 {
+            opp-hz = /bits/ 64 <923000000>;
+            opp-microvolt = <931250>;
+        };
+        opp2_11: opp-962000000 {
+            opp-hz = /bits/ 64 <962000000>;
+            opp-microvolt = <943750>;
+        };
+        opp2_12: opp-1027000000 {
+            opp-hz = /bits/ 64 <1027000000>;
+            opp-microvolt = <975000>;
+        };
+        opp2_13: opp-1092000000 {
+            opp-hz = /bits/ 64 <1092000000>;
+            opp-microvolt = <1000000>;
+        };
+        opp2_14: opp-1144000000 {
+            opp-hz = /bits/ 64 <1144000000>;
+            opp-microvolt = <1025000>;
+        };
+        opp2_15: opp-1196000000 {
+            opp-hz = /bits/ 64 <1196000000>;
+            opp-microvolt = <1050000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,mt8183-emi.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,mt8183-emi.yaml
new file mode 100644
index 000000000000..017c8478b2a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/mediatek,mt8183-emi.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/mediatek,mt8183-emi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek External Memory Interface (EMI) Interconnect
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  EMI interconnect providers support system bandwidth requirements through
+  Dynamic Voltage Frequency Scaling Resource Collector (DVFSRC) hardware.
+  The provider is able to communicate with the DVFSRC through Secure Monitor
+  Call (SMC).
+
+             ICC provider         ICC Nodes
+                              ----          ----
+             _________       |CPU |   |--- |VPU |
+    _____   |         |-----  ----    |     ----
+   |     |->|  DRAM   |       ----    |     ----
+   |DRAM |->|scheduler|----- |GPU |   |--- |DISP|
+   |     |->|  (EMI)  |       ----    |     ----
+   |_____|->|_________|---.   -----   |     ----
+               /|\         `-|MMSYS|--|--- |VDEC|
+                |             -----   |     ----
+                |                     |     ----
+                | change DRAM freq    |--- |VENC|
+             --------                 |     ----
+    SMC --> | DVFSRC |                |     ----
+             --------                 |--- |IMG |
+                                      |     ----
+                                      |     ----
+                                      |--- |CAM |
+                                            ----
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-emi
+      - mediatek,mt8195-emi
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - '#interconnect-cells'
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
index e23df4836c6f..eec987640b37 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
@@ -45,20 +45,20 @@ additionalProperties: false
 
 examples:
   # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node
-  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
   - |
 
-    apps_bcm_voter: bcm_voter {
+    apps_bcm_voter: bcm-voter {
         compatible = "qcom,bcm-voter";
     };
 
   # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node
-  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
   - |
 
     #include <dt-bindings/interconnect/qcom,icc.h>
 
-    disp_bcm_voter: bcm_voter {
+    disp_bcm_voter: bcm-voter {
         compatible = "qcom,bcm-voter";
         qcom,tcs-wait = <QCOM_ICC_TAG_AMC>;
     };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,glymur-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,glymur-rpmh.yaml
new file mode 100644
index 000000000000..d55a7bcf5591
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,glymur-rpmh.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,glymur-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on GLYMUR
+
+maintainers:
+  - Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also: include/dt-bindings/interconnect/qcom,glymur-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,glymur-aggre1-noc
+      - qcom,glymur-aggre2-noc
+      - qcom,glymur-aggre3-noc
+      - qcom,glymur-aggre4-noc
+      - qcom,glymur-clk-virt
+      - qcom,glymur-cnoc-cfg
+      - qcom,glymur-cnoc-main
+      - qcom,glymur-hscnoc
+      - qcom,glymur-lpass-ag-noc
+      - qcom,glymur-lpass-lpiaon-noc
+      - qcom,glymur-lpass-lpicx-noc
+      - qcom,glymur-mc-virt
+      - qcom,glymur-mmss-noc
+      - qcom,glymur-nsinoc
+      - qcom,glymur-nsp-noc
+      - qcom,glymur-oobm-ss-noc
+      - qcom,glymur-pcie-east-anoc
+      - qcom,glymur-pcie-east-slv-noc
+      - qcom,glymur-pcie-west-anoc
+      - qcom,glymur-pcie-west-slv-noc
+      - qcom,glymur-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,glymur-clk-virt
+              - qcom,glymur-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,glymur-pcie-west-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre PCIE_3A WEST AXI clock
+            - description: aggre PCIE_3B WEST AXI clock
+            - description: aggre PCIE_4 WEST AXI clock
+            - description: aggre PCIE_6 WEST AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,glymur-pcie-east-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre PCIE_5 EAST AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,glymur-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre USB3 TERT AXI clock
+            - description: aggre USB4_2 AXI clock
+            - description: aggre UFS PHY AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,glymur-aggre4-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre USB3 PRIM AXI clock
+            - description: aggre USB3 SEC AXI clock
+            - description: aggre USB4_0 AXI clock
+            - description: aggre USB4_1 AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,glymur-pcie-west-anoc
+              - qcom,glymur-pcie-east-anoc
+              - qcom,glymur-aggre2-noc
+              - qcom,glymur-aggre4-noc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,glymur-gcc.h>
+    clk_virt: interconnect-0 {
+      compatible = "qcom,glymur-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,glymur-aggre1-noc";
+      reg = <0x016e0000 0x14400>;
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre4_noc: interconnect@1740000 {
+      compatible = "qcom,glymur-aggre4-noc";
+      reg = <0x01740000 0x14400>;
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+      clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+               <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+               <&gcc GCC_AGGRE_USB4_0_AXI_CLK>,
+               <&gcc GCC_AGGRE_USB4_1_AXI_CLK>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml
new file mode 100644
index 000000000000..2c3b2fd81a74
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,kaanapali-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on Kaanapali
+
+maintainers:
+  - Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also: include/dt-bindings/interconnect/qcom,kaanapali-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,kaanapali-aggre-noc
+      - qcom,kaanapali-clk-virt
+      - qcom,kaanapali-cnoc-main
+      - qcom,kaanapali-cnoc-cfg
+      - qcom,kaanapali-gem-noc
+      - qcom,kaanapali-lpass-ag-noc
+      - qcom,kaanapali-lpass-lpiaon-noc
+      - qcom,kaanapali-lpass-lpicx-noc
+      - qcom,kaanapali-mc-virt
+      - qcom,kaanapali-mmss-noc
+      - qcom,kaanapali-nsp-noc
+      - qcom,kaanapali-pcie-anoc
+      - qcom,kaanapali-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,kaanapali-clk-virt
+              - qcom,kaanapali-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,kaanapali-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,kaanapali-aggre-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,kaanapali-aggre-noc
+              - qcom,kaanapali-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clk_virt: interconnect-0 {
+      compatible = "qcom,kaanapali-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre_noc: interconnect@16e0000 {
+      compatible = "qcom,kaanapali-aggre-noc";
+      reg = <0x016e0000 0x42400>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc_aggre_ufs_phy_axi_clk>,
+               <&gcc_aggre_usb3_prim_axi_clk>,
+               <&rpmhcc_ipa_clk>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,milos-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,milos-rpmh.yaml
new file mode 100644
index 000000000000..00b7a4108d45
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,milos-rpmh.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,milos-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on Milos SoC
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also: include/dt-bindings/interconnect/qcom,milos-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,milos-aggre1-noc
+      - qcom,milos-aggre2-noc
+      - qcom,milos-clk-virt
+      - qcom,milos-cnoc-cfg
+      - qcom,milos-cnoc-main
+      - qcom,milos-gem-noc
+      - qcom,milos-lpass-ag-noc
+      - qcom,milos-mc-virt
+      - qcom,milos-mmss-noc
+      - qcom,milos-nsp-noc
+      - qcom,milos-pcie-anoc
+      - qcom,milos-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,milos-clk-virt
+              - qcom,milos-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,milos-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,milos-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre USB3 PRIM AXI clock
+            - description: aggre UFS PHY AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,milos-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,milos-aggre1-noc
+              - qcom,milos-aggre2-noc
+              - qcom,milos-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,milos-gcc.h>
+
+    interconnect-0 {
+        compatible = "qcom,milos-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    interconnect@16e0000 {
+        compatible = "qcom,milos-aggre1-noc";
+        reg = <0x016e0000 0x16400>;
+        #interconnect-cells = <2>;
+        clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+                 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml
new file mode 100644
index 000000000000..534644cccdcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8939.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8939.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8937/MSM8939/MSM8976 Network-On-Chip interconnect
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  The Qualcomm MSM8937/MSM8939/MSM8976 interconnect providers support
+  adjusting the bandwidth requirements between the various NoC fabrics.
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8937-bimc
+      - qcom,msm8937-pcnoc
+      - qcom,msm8937-snoc
+      - qcom,msm8939-bimc
+      - qcom,msm8939-pcnoc
+      - qcom,msm8939-snoc
+      - qcom,msm8976-bimc
+      - qcom,msm8976-pcnoc
+      - qcom,msm8976-snoc
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '^interconnect-[a-z0-9\-]+$':
+    type: object
+    $ref: qcom,rpm-common.yaml#
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    allOf:
+      - $ref: qcom,rpm-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,msm8937-snoc-mm
+          - qcom,msm8939-snoc-mm
+          - qcom,msm8976-snoc-mm
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    snoc: interconnect@580000 {
+        compatible = "qcom,msm8939-snoc";
+        reg = <0x00580000 0x14000>;
+        #interconnect-cells = <1>;
+
+        snoc_mm: interconnect-snoc {
+            compatible = "qcom,msm8939-snoc-mm";
+            #interconnect-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml
new file mode 100644
index 000000000000..56cdb77b369a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8953.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8953.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8953 Network-On-Chip interconnect
+
+maintainers:
+  - Barnabas Czeman <barnabas.czeman@mainlining.org>
+
+description: |
+  The Qualcomm MSM8953 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+  See also: include/dt-bindings/interconnect/qcom,msm8953.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8953-bimc
+      - qcom,msm8953-pcnoc
+      - qcom,msm8953-snoc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  '#interconnect-cells':
+    const: 2
+
+patternProperties:
+  '^interconnect-[a-z0-9\-]+$':
+    type: object
+    $ref: qcom,rpm-common.yaml#
+    unevaluatedProperties: false
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    properties:
+      compatible:
+        const: qcom,msm8953-snoc-mm
+
+    required:
+      - compatible
+      - '#interconnect-cells'
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8953-pcnoc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCNOC USB3 AXI Clock.
+
+        clock-names:
+          const: pcnoc_usb3_axi
+
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clocks: false
+        clock-names: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8953.h>
+
+    interconnect@580000 {
+        compatible = "qcom,msm8953-snoc";
+        reg = <0x580000 0x16080>;
+
+        #interconnect-cells = <2>;
+
+        interconnect-snoc {
+            compatible = "qcom,msm8953-snoc-mm";
+
+            #interconnect-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
index 8004c4baf397..95ce25ce1f7d 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8974.yaml
@@ -50,13 +50,13 @@ additionalProperties: false
 
 examples:
   - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-
-      bimc: interconnect@fc380000 {
-              reg = <0xfc380000 0x6a000>;
-              compatible = "qcom,msm8974-bimc";
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
-      };
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    interconnect@fc380000 {
+        reg = <0xfc380000 0x6a000>;
+        compatible = "qcom,msm8974-bimc";
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml
new file mode 100644
index 000000000000..e3f964aaad1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8996.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8996.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 Network-On-Chip interconnect
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  The Qualcomm MSM8996 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+properties:
+  compatible:
+    enum:
+      - qcom,msm8996-a0noc
+      - qcom,msm8996-a1noc
+      - qcom,msm8996-a2noc
+      - qcom,msm8996-bimc
+      - qcom,msm8996-cnoc
+      - qcom,msm8996-mnoc
+      - qcom,msm8996-pnoc
+      - qcom,msm8996-snoc
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8996-a0noc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Aggregate0 System NoC AXI Clock.
+            - description: Aggregate0 Config NoC AHB Clock.
+            - description: Aggregate0 NoC MPU Clock.
+
+        clock-names:
+          items:
+            - const: aggre0_snoc_axi
+            - const: aggre0_cnoc_ahb
+            - const: aggre0_noc_mpu_cfg
+
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8996-mnoc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: CPU-NoC High-performance Bus Clock.
+
+        clock-names:
+          const: iface
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8996-a2noc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Aggregate2 NoC UFS AXI Clock
+            - description: UFS AXI Clock
+
+        clock-names:
+          items:
+            - const: aggre2_ufs_axi
+            - const: ufs_axi
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    bimc: interconnect@408000 {
+        compatible = "qcom,msm8996-bimc";
+        reg = <0x00408000 0x5a000>;
+        #interconnect-cells = <1>;
+    };
+
+    a0noc: interconnect@543000 {
+        compatible = "qcom,msm8996-a0noc";
+        reg = <0x00543000 0x6000>;
+        #interconnect-cells = <1>;
+        clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>,
+                 <&gcc GCC_AGGRE0_CNOC_AHB_CLK>,
+                 <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>;
+        clock-names = "aggre0_snoc_axi",
+                      "aggre0_cnoc_ahb",
+                      "aggre0_noc_mpu_cfg";
+        power-domains = <&gcc AGGRE0_NOC_GDSC>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
new file mode 100644
index 000000000000..17b09292000e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8998-bwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Interconnect Bandwidth Monitor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Bandwidth Monitor measures current throughput on buses between various NoC
+  fabrics and provides information when it crosses configured thresholds.
+
+  Certain SoCs might have more than one Bandwidth Monitors, for example on SDM845::
+   - Measuring the bandwidth between CPUs and Last Level Cache Controller -
+     called just BWMON,
+   - Measuring the bandwidth between Last Level Cache Controller and memory
+     (DDR) - called LLCC BWMON.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,msm8998-bwmon       # BWMON v4
+      - items:
+          - enum:
+              - qcom,kaanapali-cpu-bwmon
+              - qcom,qcm2290-cpu-bwmon
+              - qcom,qcs615-cpu-bwmon
+              - qcom,qcs8300-cpu-bwmon
+              - qcom,sa8775p-cpu-bwmon
+              - qcom,sc7180-cpu-bwmon
+              - qcom,sc7280-cpu-bwmon
+              - qcom,sc8280xp-cpu-bwmon
+              - qcom,sdm845-cpu-bwmon
+              - qcom,sm6115-cpu-bwmon
+              - qcom,sm6350-llcc-bwmon
+              - qcom,sm8250-cpu-bwmon
+              - qcom,sm8550-cpu-bwmon
+              - qcom,sm8650-cpu-bwmon
+              - qcom,sm8750-cpu-bwmon
+              - qcom,x1e80100-cpu-bwmon
+          - const: qcom,sdm845-bwmon    # BWMON v4, unified register space
+      - items:
+          - enum:
+              - qcom,qcs615-llcc-bwmon
+              - qcom,qcs8300-llcc-bwmon
+              - qcom,sa8775p-llcc-bwmon
+              - qcom,sc7180-llcc-bwmon
+              - qcom,sc8280xp-llcc-bwmon
+              - qcom,sm6350-cpu-bwmon
+              - qcom,sm8250-llcc-bwmon
+              - qcom,sm8550-llcc-bwmon
+              - qcom,sm8650-llcc-bwmon
+              - qcom,x1e80100-llcc-bwmon
+          - const: qcom,sc7280-llcc-bwmon
+      - const: qcom,sc7280-llcc-bwmon   # BWMON v5
+      - const: qcom,sdm845-llcc-bwmon   # BWMON v5
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  reg:
+    # BWMON v5 uses one register address space, v1-v4 use one or two.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+
+  nonposted-mmio: true
+
+required:
+  - compatible
+  - interconnects
+  - interrupts
+  - operating-points-v2
+  - reg
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8998-bwmon
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+        reg-names:
+          items:
+            - const: monitor
+            - const: global
+
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+        reg-names:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmu@1436400 {
+        compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon";
+        reg = <0x01436400 0x600>;
+        interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+        interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
+
+        operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+        cpu_bwmon_opp_table: opp-table {
+            compatible = "operating-points-v2";
+            opp-0 {
+                opp-peak-kBps = <4800000>;
+            };
+            opp-1 {
+                opp-peak-kBps = <9216000>;
+            };
+            opp-2 {
+                opp-peak-kBps = <15052800>;
+            };
+            opp-3 {
+                opp-peak-kBps = <20889600>;
+            };
+            opp-4 {
+                opp-peak-kBps = <25497600>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index e701524ee811..4b9b98fbe8f2 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Operating State Manager (OSM) L3 Interconnect Provider
 
 maintainers:
-  - Sibi Sankar <sibis@codeaurora.org>
+  - Sibi Sankar <quic_sibis@quicinc.com>
 
 description:
   L3 cache bandwidth requirements on Qualcomm SoCs is serviced by the OSM.
@@ -16,12 +16,36 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7180-osm-l3
-      - qcom,sc8180x-osm-l3
-      - qcom,sdm845-osm-l3
-      - qcom,sm8150-osm-l3
-      - qcom,sm8250-epss-l3
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc7180-osm-l3
+              - qcom,sc8180x-osm-l3
+              - qcom,sdm670-osm-l3
+              - qcom,sdm845-osm-l3
+              - qcom,sm6350-osm-l3
+              - qcom,sm8150-osm-l3
+          - const: qcom,osm-l3
+      - items:
+          - enum:
+              - qcom,sa8775p-epss-l3
+              - qcom,sc7280-epss-l3
+              - qcom,sc8280xp-epss-l3
+              - qcom,sm6375-cpucp-l3
+              - qcom,sm8250-epss-l3
+              - qcom,sm8350-epss-l3
+              - qcom,sm8650-epss-l3
+          - const: qcom,epss-l3
+      - items:
+          - enum:
+              - qcom,qcs8300-epss-l3
+          - const: qcom,sa8775p-epss-l3
+          - const: qcom,epss-l3
+      - items:
+          - enum:
+              - qcom,qcs615-osm-l3
+          - const: qcom,sm8150-osm-l3
+          - const: qcom,osm-l3
 
   reg:
     maxItems: 1
@@ -55,7 +79,7 @@ examples:
     #define RPMH_CXO_CLK        0
 
     osm_l3: interconnect@17d41000 {
-      compatible = "qcom,sdm845-osm-l3";
+      compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
       reg = <0x17d41000 0x1400>;
 
       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
new file mode 100644
index 000000000000..b6c15314c5c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM2290 Network-On-Chip interconnect
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Qualcomm QCM2290 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,qcm2290-bimc
+      - qcom,qcm2290-cnoc
+      - qcom,qcm2290-snoc
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    allOf:
+      - $ref: qcom,rpm-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,qcm2290-qup-virt
+          - qcom,qcm2290-mmrt-virt
+          - qcom,qcm2290-mmnrt-virt
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    snoc: interconnect@1880000 {
+        compatible = "qcom,qcm2290-snoc";
+        reg = <0x01880000 0x60200>;
+        #interconnect-cells = <1>;
+
+        qup_virt: interconnect-qup {
+            compatible = "qcom,qcm2290-qup-virt";
+            #interconnect-cells = <1>;
+        };
+
+        mmnrt_virt: interconnect-mmnrt {
+            compatible = "qcom,qcm2290-mmnrt-virt";
+            #interconnect-cells = <1>;
+        };
+
+        mmrt_virt: interconnect-mmrt {
+            compatible = "qcom,qcm2290-mmrt-virt";
+            #interconnect-cells = <1>;
+        };
+    };
+
+    cnoc: interconnect@1900000 {
+        compatible = "qcom,qcm2290-cnoc";
+        reg = <0x01900000 0x8200>;
+        #interconnect-cells = <1>;
+    };
+
+    bimc: interconnect@4480000 {
+        compatible = "qcom,qcm2290-bimc";
+        reg = <0x04480000 0x80000>;
+        #interconnect-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs615-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs615-rpmh.yaml
new file mode 100644
index 000000000000..9d762b2a1fcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs615-rpmh.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qcs615-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on QCS615
+
+maintainers:
+  - Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also: include/dt-bindings/interconnect/qcom,qcs615-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs615-aggre1-noc
+      - qcom,qcs615-camnoc-virt
+      - qcom,qcs615-config-noc
+      - qcom,qcs615-dc-noc
+      - qcom,qcs615-gem-noc
+      - qcom,qcs615-ipa-virt
+      - qcom,qcs615-mc-virt
+      - qcom,qcs615-mmss-noc
+      - qcom,qcs615-system-noc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs615-camnoc-virt
+              - qcom,qcs615-ipa-virt
+              - qcom,qcs615-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gem_noc: interconnect@9680000 {
+        compatible = "qcom,qcs615-gem-noc";
+        reg = <0x9680000 0x3e200>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    mc_virt: interconnect-2 {
+        compatible = "qcom,qcs615-mc-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcs8300-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcs8300-rpmh.yaml
new file mode 100644
index 000000000000..e9f528d6d9a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcs8300-rpmh.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qcs8300-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on QCS8300
+
+maintainers:
+  - Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also: include/dt-bindings/interconnect/qcom,qcs8300-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs8300-aggre1-noc
+      - qcom,qcs8300-aggre2-noc
+      - qcom,qcs8300-clk-virt
+      - qcom,qcs8300-config-noc
+      - qcom,qcs8300-dc-noc
+      - qcom,qcs8300-gem-noc
+      - qcom,qcs8300-gpdsp-anoc
+      - qcom,qcs8300-lpass-ag-noc
+      - qcom,qcs8300-mc-virt
+      - qcom,qcs8300-mmss-noc
+      - qcom,qcs8300-nspa-noc
+      - qcom,qcs8300-pcie-anoc
+      - qcom,qcs8300-system-noc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs8300-clk-virt
+              - qcom,qcs8300-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gem_noc: interconnect@9100000 {
+        compatible = "qcom,qcs8300-gem-noc";
+        reg = <0x9100000 0xf7080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    clk_virt: interconnect-0 {
+        compatible = "qcom,qcs8300-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml
new file mode 100644
index 000000000000..0070b0396e31
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qdu1000-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on QDU1000
+
+maintainers:
+  - Georgi Djakov <djakov@kernel.org>
+  - Odelu Kukatla <quic_okukatla@quicinc.com>
+
+description: |
+   RPMh interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qdu1000-clk-virt
+      - qcom,qdu1000-gem-noc
+      - qcom,qdu1000-mc-virt
+      - qcom,qdu1000-system-noc
+
+  '#interconnect-cells': true
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qdu1000-clk-virt
+              - qcom,qdu1000-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
+
+    system_noc: interconnect@1640000 {
+        compatible = "qcom,qdu1000-system-noc";
+        reg = <0x1640000 0x45080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    clk_virt: interconnect-0 {
+        compatible = "qcom,qdu1000-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml
new file mode 100644
index 000000000000..1ea52b091609
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm-common.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,rpm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  RPM interconnect providers support for managing system bandwidth requirements
+  through manual requests based on either predefined values or as indicated by
+  the bus monitor hardware. Each provider node represents a NoC bus master,
+  driven by a dedicated clock source.
+
+properties:
+  '#interconnect-cells':
+    oneOf:
+      - const: 2
+      - const: 1
+        deprecated: true
+
+required:
+  - '#interconnect-cells'
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
index 983d71fb5399..01d436d4a553 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -7,79 +7,44 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm RPM Network-On-Chip Interconnect
 
 maintainers:
-  - Georgi Djakov <georgi.djakov@linaro.org>
+  - Georgi Djakov <djakov@kernel.org>
 
 description: |
   RPM interconnect providers support system bandwidth requirements through
   RPM processor. The provider is able to communicate with the RPM through
   the RPM shared memory device.
 
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+
 properties:
   reg:
     maxItems: 1
 
   compatible:
     enum:
+      - qcom,msm8909-bimc
+      - qcom,msm8909-pcnoc
+      - qcom,msm8909-snoc
       - qcom,msm8916-bimc
       - qcom,msm8916-pcnoc
       - qcom,msm8916-snoc
-      - qcom,msm8939-bimc
-      - qcom,msm8939-pcnoc
-      - qcom,msm8939-snoc
-      - qcom,msm8939-snoc-mm
       - qcom,qcs404-bimc
       - qcom,qcs404-pcnoc
       - qcom,qcs404-snoc
 
-  '#interconnect-cells':
-    const: 1
-
-  clock-names:
-    items:
-      - const: bus
-      - const: bus_a
-
-  clocks:
-    items:
-      - description: Bus Clock
-      - description: Bus A Clock
-
 required:
   - compatible
   - reg
-  - '#interconnect-cells'
-  - clock-names
-  - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-
-      bimc: interconnect@400000 {
-              compatible = "qcom,msm8916-bimc";
-              reg = <0x00400000 0x62000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
-      };
-
-      pcnoc: interconnect@500000 {
-              compatible = "qcom,msm8916-pcnoc";
-              reg = <0x00500000 0x11000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-                       <&rpmcc RPM_SMD_PCNOC_A_CLK>;
-      };
+    #include <dt-bindings/clock/qcom,rpmcc.h>
 
-      snoc: interconnect@580000 {
-              compatible = "qcom,msm8916-snoc";
-              reg = <0x00580000 0x14000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-                       <&rpmcc RPM_SMD_SNOC_A_CLK>;
-      };
+    interconnect@400000 {
+        compatible = "qcom,msm8916-bimc";
+        reg = <0x00400000 0x62000>;
+        #interconnect-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml
new file mode 100644
index 000000000000..bbeb0541536b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,rpmh-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <djakov@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+properties:
+  '#interconnect-cells':
+    enum: [ 1, 2 ]
+
+  qcom,bcm-voters:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    maxItems: 2
+    description:
+      List of phandles to qcom,bcm-voter nodes that are required by
+      this interconnect to send RPMh commands.
+
+  qcom,bcm-voter-names:
+    maxItems: 2
+    description:
+      Names for each of the qcom,bcm-voters specified.
+
+required:
+  - '#interconnect-cells'
+  - qcom,bcm-voters
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index 3fd1a134162d..da16d8e9bdc5 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -8,7 +8,7 @@ title: Qualcomm RPMh Network-On-Chip Interconnect
 
 maintainers:
   - Georgi Djakov <georgi.djakov@linaro.org>
-  - Odelu Kukatla <okukatla@codeaurora.org>
+  - Odelu Kukatla <quic_okukatla@quicinc.com>
 
 description: |
    RPMh interconnect providers support system bandwidth requirements through
@@ -31,24 +31,11 @@ properties:
       - qcom,sc7180-config-noc
       - qcom,sc7180-dc-noc
       - qcom,sc7180-gem-noc
-      - qcom,sc7180-ipa-virt
       - qcom,sc7180-mc-virt
       - qcom,sc7180-mmss-noc
       - qcom,sc7180-npu-noc
       - qcom,sc7180-qup-virt
       - qcom,sc7180-system-noc
-      - qcom,sc7280-aggre1-noc
-      - qcom,sc7280-aggre2-noc
-      - qcom,sc7280-clk-virt
-      - qcom,sc7280-cnoc2
-      - qcom,sc7280-cnoc3
-      - qcom,sc7280-dc-noc
-      - qcom,sc7280-gem-noc
-      - qcom,sc7280-lpass-ag-noc
-      - qcom,sc7280-mc-virt
-      - qcom,sc7280-mmss-noc
-      - qcom,sc7280-nsp-noc
-      - qcom,sc7280-system-noc
       - qcom,sc8180x-aggre1-noc
       - qcom,sc8180x-aggre2-noc
       - qcom,sc8180x-camnoc-virt
@@ -56,10 +43,18 @@ properties:
       - qcom,sc8180x-config-noc
       - qcom,sc8180x-dc-noc
       - qcom,sc8180x-gem-noc
-      - qcom,sc8180x-ipa-virt
       - qcom,sc8180x-mc-virt
       - qcom,sc8180x-mmss-noc
+      - qcom,sc8180x-qup-virt
       - qcom,sc8180x-system-noc
+      - qcom,sdm670-aggre1-noc
+      - qcom,sdm670-aggre2-noc
+      - qcom,sdm670-config-noc
+      - qcom,sdm670-dc-noc
+      - qcom,sdm670-gladiator-noc
+      - qcom,sdm670-mem-noc
+      - qcom,sdm670-mmss-noc
+      - qcom,sdm670-system-noc
       - qcom,sdm845-aggre1-noc
       - qcom,sdm845-aggre2-noc
       - qcom,sdm845-config-noc
@@ -68,18 +63,19 @@ properties:
       - qcom,sdm845-mem-noc
       - qcom,sdm845-mmss-noc
       - qcom,sdm845-system-noc
-      - qcom,sdx55-ipa-virt
       - qcom,sdx55-mc-virt
       - qcom,sdx55-mem-noc
       - qcom,sdx55-system-noc
+      - qcom,sdx65-mc-virt
+      - qcom,sdx65-mem-noc
+      - qcom,sdx65-system-noc
       - qcom,sm8150-aggre1-noc
       - qcom,sm8150-aggre2-noc
-      - qcom,sm8150-camnoc-noc
+      - qcom,sm8150-camnoc-virt
       - qcom,sm8150-compute-noc
       - qcom,sm8150-config-noc
       - qcom,sm8150-dc-noc
       - qcom,sm8150-gem-noc
-      - qcom,sm8150-ipa-virt
       - qcom,sm8150-mc-virt
       - qcom,sm8150-mmss-noc
       - qcom,sm8150-system-noc
@@ -89,10 +85,10 @@ properties:
       - qcom,sm8250-config-noc
       - qcom,sm8250-dc-noc
       - qcom,sm8250-gem-noc
-      - qcom,sm8250-ipa-virt
       - qcom,sm8250-mc-virt
       - qcom,sm8250-mmss-noc
       - qcom,sm8250-npu-noc
+      - qcom,sm8250-qup-virt
       - qcom,sm8250-system-noc
       - qcom,sm8350-aggre1-noc
       - qcom,sm8350-aggre2-noc
@@ -105,42 +101,44 @@ properties:
       - qcom,sm8350-compute-noc
       - qcom,sm8350-system-noc
 
-  '#interconnect-cells':
-    enum: [ 1, 2 ]
-
-  qcom,bcm-voters:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: |
-      List of phandles to qcom,bcm-voter nodes that are required by
-      this interconnect to send RPMh commands.
-
-  qcom,bcm-voter-names:
-    description: |
-      Names for each of the qcom,bcm-voters specified.
+  '#interconnect-cells': true
 
 required:
   - compatible
-  - reg
-  - '#interconnect-cells'
-  - qcom,bcm-voters
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            enum:
+              - qcom,sc8180x-camnoc-virt
+              - qcom,sc8180x-mc-virt
+              - qcom,sc8180x-qup-virt
+              - qcom,sdx65-mc-virt
+              - qcom,sm8250-qup-virt
+    then:
+      required:
+        - reg
+
+unevaluatedProperties: false
 
 examples:
   - |
-      #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
 
-      mem_noc: interconnect@1380000 {
-             compatible = "qcom,sdm845-mem-noc";
-             reg = <0x01380000 0x27200>;
-             #interconnect-cells = <1>;
-             qcom,bcm-voters = <&apps_bcm_voter>;
-      };
+    interconnect@1380000 {
+        compatible = "qcom,sdm845-mem-noc";
+        reg = <0x01380000 0x27200>;
+        #interconnect-cells = <1>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
 
-      mmss_noc: interconnect@1740000 {
-             compatible = "qcom,sdm845-mmss-noc";
-             reg = <0x01740000 0x1c1000>;
-             #interconnect-cells = <1>;
-             qcom,bcm-voter-names = "apps", "disp";
-             qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
-      };
+    interconnect@1740000 {
+        compatible = "qcom,sdm845-mmss-noc";
+        reg = <0x01740000 0x1c1000>;
+        #interconnect-cells = <1>;
+        qcom,bcm-voter-names = "apps", "disp";
+        qcom,bcm-voters = <&apps_bcm_voter>, <&disp_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml
new file mode 100644
index 000000000000..71428d2cce18
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sa8775p-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SA8775P
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also: include/dt-bindings/interconnect/qcom,sa8775p.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sa8775p-aggre1-noc
+      - qcom,sa8775p-aggre2-noc
+      - qcom,sa8775p-clk-virt
+      - qcom,sa8775p-config-noc
+      - qcom,sa8775p-dc-noc
+      - qcom,sa8775p-gem-noc
+      - qcom,sa8775p-gpdsp-anoc
+      - qcom,sa8775p-lpass-ag-noc
+      - qcom,sa8775p-mc-virt
+      - qcom,sa8775p-mmss-noc
+      - qcom,sa8775p-nspa-noc
+      - qcom,sa8775p-nspb-noc
+      - qcom,sa8775p-pcie-anoc
+      - qcom,sa8775p-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre QUP PRIM AXI clock
+            - description: aggre USB2 PRIM AXI clock
+            - description: aggre USB3 PRIM AXI clock
+            - description: aggre USB3 SEC AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS CARD AXI clock
+            - description: RPMH CC IPA clock
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    clk_virt: interconnect-clk-virt {
+        compatible = "qcom,sa8775p-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16c0000 {
+        compatible = "qcom,sa8775p-aggre1-noc";
+        reg = <0x016c0000 0x18080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                 <&gcc GCC_AGGRE_NOC_QUPV3_AXI_CLK>,
+                 <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>,
+                 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+                 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sar2130p-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sar2130p-rpmh.yaml
new file mode 100644
index 000000000000..f5d3d0c5df73
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sar2130p-rpmh.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sar2130p-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SAR2130P
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Georgi Djakov <djakov@kernel.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also: include/dt-bindings/interconnect/qcom,sar2130p-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sar2130p-clk-virt
+      - qcom,sar2130p-config-noc
+      - qcom,sar2130p-gem-noc
+      - qcom,sar2130p-lpass-ag-noc
+      - qcom,sar2130p-mc-virt
+      - qcom,sar2130p-mmss-noc
+      - qcom,sar2130p-nsp-noc
+      - qcom,sar2130p-pcie-anoc
+      - qcom,sar2130p-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sar2130p-clk-virt
+              - qcom,sar2130p-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sar2130p-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sar2130p-system-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sar2130p-system-noc
+              - qcom,sar2130p-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clk_virt: interconnect-0 {
+      compatible = "qcom,sar2130p-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@1680000 {
+      compatible = "qcom,sar2130p-system-noc";
+      reg = <0x01680000 0x29080>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc_prim_axi_clk>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml
new file mode 100644
index 000000000000..81c3dff53992
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sc7280-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SC7280
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also: include/dt-bindings/interconnect/qcom,sc7280.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-aggre1-noc
+      - qcom,sc7280-aggre2-noc
+      - qcom,sc7280-clk-virt
+      - qcom,sc7280-cnoc2
+      - qcom,sc7280-cnoc3
+      - qcom,sc7280-dc-noc
+      - qcom,sc7280-gem-noc
+      - qcom,sc7280-lpass-ag-noc
+      - qcom,sc7280-mc-virt
+      - qcom,sc7280-mmss-noc
+      - qcom,sc7280-nsp-noc
+      - qcom,sc7280-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-clk-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-aggre1-noc
+              - qcom,sc7280-aggre2-noc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    interconnect {
+        compatible = "qcom,sc7280-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    interconnect@9100000 {
+        reg = <0x9100000 0xe2200>;
+        compatible = "qcom,sc7280-gem-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    interconnect@16e0000 {
+        reg = <0x016e0000 0x1c080>;
+        compatible = "qcom,sc7280-aggre1-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml
new file mode 100644
index 000000000000..2a5a7594bafd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sc8280xp-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SC8280XP
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also: include/dt-bindings/interconnect/qcom,sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-aggre1-noc
+      - qcom,sc8280xp-aggre2-noc
+      - qcom,sc8280xp-clk-virt
+      - qcom,sc8280xp-config-noc
+      - qcom,sc8280xp-dc-noc
+      - qcom,sc8280xp-gem-noc
+      - qcom,sc8280xp-lpass-ag-noc
+      - qcom,sc8280xp-mc-virt
+      - qcom,sc8280xp-mmss-noc
+      - qcom,sc8280xp-nspa-noc
+      - qcom,sc8280xp-nspb-noc
+      - qcom,sc8280xp-system-noc
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interconnect-0 {
+        compatible = "qcom,sc8280xp-aggre1-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml
index bcd41e491f1d..8f6bc6399626 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml
@@ -7,16 +7,13 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm SDM660 Network-On-Chip interconnect
 
 maintainers:
-  - AngeloGioacchino Del Regno <kholk11@gmail.com>
+  - Konrad Dybcio <konradybcio@kernel.org>
 
 description: |
   The Qualcomm SDM660 interconnect providers support adjusting the
   bandwidth requirements between the various NoC fabrics.
 
 properties:
-  reg:
-    maxItems: 1
-
   compatible:
     enum:
       - qcom,sdm660-a2noc
@@ -26,160 +23,86 @@ properties:
       - qcom,sdm660-mnoc
       - qcom,sdm660-snoc
 
-  '#interconnect-cells':
-    const: 1
+  reg:
+    maxItems: 1
 
-  clocks:
+  clock-names:
     minItems: 1
-    maxItems: 7
+    maxItems: 5
 
-  clock-names:
+  clocks:
     minItems: 1
-    maxItems: 7
+    maxItems: 5
 
 required:
   - compatible
   - reg
-  - '#interconnect-cells'
-  - clock-names
-  - clocks
 
-additionalProperties: false
+unevaluatedProperties: false
 
 allOf:
+  - $ref: qcom,rpm-common.yaml#
   - if:
       properties:
         compatible:
-          contains:
-            enum:
-              - qcom,sdm660-mnoc
+          const: qcom,sdm660-mnoc
+
     then:
       properties:
         clocks:
           items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
             - description: CPU-NoC High-performance Bus Clock.
+
         clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-            - const: iface
+          const: iface
 
   - if:
       properties:
         compatible:
-          contains:
-            enum:
-              - qcom,sdm660-a2noc
+          const: qcom,sdm660-a2noc
+
     then:
       properties:
         clocks:
           items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
             - description: IPA Clock.
             - description: UFS AXI Clock.
             - description: Aggregate2 UFS AXI Clock.
             - description: Aggregate2 USB3 AXI Clock.
             - description: Config NoC USB2 AXI Clock.
+
         clock-names:
           items:
-            - const: bus
-            - const: bus_a
             - const: ipa
             - const: ufs_axi
             - const: aggre2_ufs_axi
             - const: aggre2_usb3_axi
             - const: cfg_noc_usb2_axi
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm660-bimc
-              - qcom,sdm660-cnoc
-              - qcom,sdm660-gnoc
-              - qcom,sdm660-snoc
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-
 examples:
   - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-      #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
-      #include <dt-bindings/clock/qcom,gcc-sdm660.h>
-
-      bimc: interconnect@1008000 {
-              compatible = "qcom,sdm660-bimc";
-              reg = <0x01008000 0x78000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
-      };
-
-      cnoc: interconnect@1500000 {
-              compatible = "qcom,sdm660-cnoc";
-              reg = <0x01500000 0x10000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-                       <&rpmcc RPM_SMD_CNOC_A_CLK>;
-      };
-
-      snoc: interconnect@1626000 {
-              compatible = "qcom,sdm660-snoc";
-              reg = <0x01626000 0x7090>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-                       <&rpmcc RPM_SMD_SNOC_A_CLK>;
-      };
-
-      a2noc: interconnect@1704000 {
-              compatible = "qcom,sdm660-a2noc";
-              reg = <0x01704000 0xc100>;
-              #interconnect-cells = <1>;
-              clock-names = "bus",
-                            "bus_a",
-                            "ipa",
-                            "ufs_axi",
-                            "aggre2_ufs_axi",
-                            "aggre2_usb3_axi",
-                            "cfg_noc_usb2_axi";
-              clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-                       <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-                       <&rpmcc RPM_SMD_IPA_CLK>,
-                       <&gcc GCC_UFS_AXI_CLK>,
-                       <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
-                       <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
-                       <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
-      };
-
-      mnoc: interconnect@1745000 {
-              compatible = "qcom,sdm660-mnoc";
-              reg = <0x01745000 0xa010>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a", "iface";
-              clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
-                       <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
-                       <&mmcc AHB_CLK_SRC>;
-      };
-
-      gnoc: interconnect@17900000 {
-              compatible = "qcom,sdm660-gnoc";
-              reg = <0x17900000 0xe000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&xo_board>, <&xo_board>;
-      };
+    #include <dt-bindings/clock/qcom,gcc-sdm660.h>
+    #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    bimc: interconnect@1008000 {
+        compatible = "qcom,sdm660-bimc";
+        reg = <0x01008000 0x78000>;
+        #interconnect-cells = <1>;
+    };
+
+    a2noc: interconnect@1704000 {
+        compatible = "qcom,sdm660-a2noc";
+        reg = <0x01704000 0xc100>;
+        #interconnect-cells = <1>;
+        clocks = <&rpmcc RPM_SMD_IPA_CLK>,
+                 <&gcc GCC_UFS_AXI_CLK>,
+                 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+                 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+                 <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
+        clock-names = "ipa",
+                      "ufs_axi",
+                      "aggre2_ufs_axi",
+                      "aggre2_usb3_axi",
+                      "cfg_noc_usb2_axi";
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml
new file mode 100644
index 000000000000..4b5e9f9b07ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sdx75-rpmh.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sdx75-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SDX75
+
+maintainers:
+  - Rohit Agarwal <quic_rohiagar@quicinc.com>
+
+description:
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdx75-clk-virt
+      - qcom,sdx75-dc-noc
+      - qcom,sdx75-gem-noc
+      - qcom,sdx75-mc-virt
+      - qcom,sdx75-pcie-anoc
+      - qcom,sdx75-system-noc
+
+  '#interconnect-cells': true
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx75-clk-virt
+              - qcom,sdx75-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx75-clk-virt
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC QPIC Clock
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    clk_virt: interconnect-0 {
+        compatible = "qcom,sdx75-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&rpmhcc RPMH_QPIC_CLK>;
+    };
+
+    system_noc: interconnect@1640000 {
+        compatible = "qcom,sdx75-system-noc";
+        reg = <0x1640000 0x4b400>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml
new file mode 100644
index 000000000000..14b1a0b08e73
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm6115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 Network-On-Chip interconnect
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description:
+  The Qualcomm SM6115 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-bimc
+      - qcom,sm6115-cnoc
+      - qcom,sm6115-snoc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    $ref: qcom,rpm-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm6115-clk-virt
+          - qcom,sm6115-mmrt-virt
+          - qcom,sm6115-mmnrt-virt
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: qcom,rpm-common.yaml#
+  - if:
+      properties:
+        compatible:
+          const: qcom,sm6115-cnoc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: USB-NoC AXI clock
+
+        clock-names:
+          items:
+            - const: usb_axi
+
+  - if:
+      properties:
+        compatible:
+          const: qcom,sm6115-snoc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: CPU-NoC AXI clock.
+            - description: UFS-NoC AXI clock.
+            - description: USB-NoC AXI clock.
+            - description: IPA clock.
+
+        clock-names:
+          items:
+            - const: cpu_axi
+            - const: ufs_axi
+            - const: usb_axi
+            - const: ipa
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm6115-bimc
+            - qcom,sm6115-clk-virt
+            - qcom,sm6115-mmrt-virt
+            - qcom,sm6115-mmnrt-virt
+
+    then:
+      properties:
+        clocks: false
+        clock-names: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    snoc: interconnect@1880000 {
+        compatible = "qcom,sm6115-snoc";
+        reg = <0x01880000 0x60200>;
+        clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>,
+                 <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+                 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
+                 <&rpmcc RPM_SMD_IPA_CLK>;
+        clock-names = "cpu_axi",
+                      "ufs_axi",
+                      "usb_axi",
+                      "ipa";
+        #interconnect-cells = <1>;
+
+        qup_virt: interconnect-clk {
+            compatible = "qcom,sm6115-clk-virt";
+            #interconnect-cells = <1>;
+        };
+
+        mmnrt_virt: interconnect-mmnrt {
+            compatible = "qcom,sm6115-mmnrt-virt";
+            #interconnect-cells = <1>;
+        };
+
+        mmrt_virt: interconnect-mmrt {
+            compatible = "qcom,sm6115-mmrt-virt";
+            #interconnect-cells = <1>;
+        };
+    };
+
+    cnoc: interconnect@1900000 {
+        compatible = "qcom,sm6115-cnoc";
+        reg = <0x01900000 0x8200>;
+        #interconnect-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
new file mode 100644
index 000000000000..2dc16e4293a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm6350-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  Qualcomm RPMh-based interconnect provider on SM6350.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6350-aggre1-noc
+      - qcom,sm6350-aggre2-noc
+      - qcom,sm6350-config-noc
+      - qcom,sm6350-dc-noc
+      - qcom,sm6350-gem-noc
+      - qcom,sm6350-mmss-noc
+      - qcom,sm6350-npu-noc
+      - qcom,sm6350-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+patternProperties:
+  '^interconnect-[a-z0-9\-]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+    $ref: qcom,rpmh-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm6350-clk-virt
+          - qcom,sm6350-compute-noc
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6350-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6350-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre USB3 PRIM AXI clock
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6350-aggre1-noc
+              - qcom,sm6350-aggre2-noc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    config_noc: interconnect@1500000 {
+        compatible = "qcom,sm6350-config-noc";
+        reg = <0x01500000 0x28000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre2_noc: interconnect@1700000 {
+        compatible = "qcom,sm6350-aggre2-noc";
+        reg = <0x01700000 0x1f880>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+                 <&rpmhcc RPMH_IPA_CLK>;
+
+        compute_noc: interconnect-compute-noc {
+            compatible = "qcom,sm6350-compute-noc";
+            #interconnect-cells = <2>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml
new file mode 100644
index 000000000000..978930324bbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm7150-rpmh.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm7150-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM7150
+
+maintainers:
+  - Danila Tikhonov <danila@jiaxyga.com>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also: include/dt-bindings/interconnect/qcom,sm7150-rpmh.h
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm7150-aggre1-noc
+      - qcom,sm7150-aggre2-noc
+      - qcom,sm7150-compute-noc
+      - qcom,sm7150-config-noc
+      - qcom,sm7150-dc-noc
+      - qcom,sm7150-gem-noc
+      - qcom,sm7150-mc-virt
+      - qcom,sm7150-mmss-noc
+      - qcom,sm7150-system-noc
+
+  reg:
+    maxItems: 1
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    allOf:
+      - $ref: qcom,rpmh-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm7150-camnoc-virt
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mc_virt: interconnect@1380000 {
+        compatible = "qcom,sm7150-mc-virt";
+        reg = <0x01380000 0x40000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    system_noc: interconnect@1620000 {
+        compatible = "qcom,sm7150-system-noc";
+        reg = <0x01620000 0x40000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+
+        camnoc_virt: interconnect-0 {
+            compatible = "qcom,sm7150-camnoc-virt";
+            #interconnect-cells = <2>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml
new file mode 100644
index 000000000000..6a46dc7d473e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8450-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8450
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also: include/dt-bindings/interconnect/qcom,sm8450.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-aggre1-noc
+      - qcom,sm8450-aggre2-noc
+      - qcom,sm8450-clk-virt
+      - qcom,sm8450-config-noc
+      - qcom,sm8450-gem-noc
+      - qcom,sm8450-lpass-ag-noc
+      - qcom,sm8450-mc-virt
+      - qcom,sm8450-mmss-noc
+      - qcom,sm8450-nsp-noc
+      - qcom,sm8450-pcie-anoc
+      - qcom,sm8450-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-clk-virt
+              - qcom,sm8450-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe 0 AXI clock
+            - description: aggre-NOC PCIe 1 AXI clock
+            - description: aggre UFS PHY AXI clock
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre1-noc
+              - qcom,sm8450-aggre2-noc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    interconnect-0 {
+        compatible = "qcom,sm8450-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    interconnect@1700000 {
+        compatible = "qcom,sm8450-aggre2-noc";
+        reg = <0x01700000 0x31080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+                 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+                 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                 <&rpmhcc RPMH_IPA_CLK>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml
new file mode 100644
index 000000000000..5325ebe23c77
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8550-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8550
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also: include/dt-bindings/interconnect/qcom,sm8550-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8550-aggre1-noc
+      - qcom,sm8550-aggre2-noc
+      - qcom,sm8550-clk-virt
+      - qcom,sm8550-cnoc-main
+      - qcom,sm8550-config-noc
+      - qcom,sm8550-gem-noc
+      - qcom,sm8550-lpass-ag-noc
+      - qcom,sm8550-lpass-lpiaon-noc
+      - qcom,sm8550-lpass-lpicx-noc
+      - qcom,sm8550-mc-virt
+      - qcom,sm8550-mmss-noc
+      - qcom,sm8550-nsp-noc
+      - qcom,sm8550-pcie-anoc
+      - qcom,sm8550-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-clk-virt
+              - qcom,sm8550-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre1-noc
+              - qcom,sm8550-aggre2-noc
+              - qcom,sm8550-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+
+    clk_virt: interconnect-0 {
+      compatible = "qcom,sm8550-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,sm8550-aggre1-noc";
+      reg = <0x016e0000 0x14400>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+               <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml
new file mode 100644
index 000000000000..199fe7b232af
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8650-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8650
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also: include/dt-bindings/interconnect/qcom,sm8650-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8650-aggre1-noc
+      - qcom,sm8650-aggre2-noc
+      - qcom,sm8650-clk-virt
+      - qcom,sm8650-cnoc-main
+      - qcom,sm8650-config-noc
+      - qcom,sm8650-gem-noc
+      - qcom,sm8650-lpass-ag-noc
+      - qcom,sm8650-lpass-lpiaon-noc
+      - qcom,sm8650-lpass-lpicx-noc
+      - qcom,sm8650-mc-virt
+      - qcom,sm8650-mmss-noc
+      - qcom,sm8650-nsp-noc
+      - qcom,sm8650-pcie-anoc
+      - qcom,sm8650-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-clk-virt
+              - qcom,sm8650-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8650-aggre1-noc
+              - qcom,sm8650-aggre2-noc
+              - qcom,sm8650-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clk_virt: interconnect-0 {
+      compatible = "qcom,sm8650-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,sm8650-aggre1-noc";
+      reg = <0x016e0000 0x14400>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc_phy_axi_clk>, <&gcc_prim_axi_clk>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8750-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8750-rpmh.yaml
new file mode 100644
index 000000000000..366f40d980c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8750-rpmh.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8750-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8750
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also: include/dt-bindings/interconnect/qcom,sm8750-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8750-aggre1-noc
+      - qcom,sm8750-aggre2-noc
+      - qcom,sm8750-clk-virt
+      - qcom,sm8750-cnoc-main
+      - qcom,sm8750-config-noc
+      - qcom,sm8750-gem-noc
+      - qcom,sm8750-lpass-ag-noc
+      - qcom,sm8750-lpass-lpiaon-noc
+      - qcom,sm8750-lpass-lpicx-noc
+      - qcom,sm8750-mc-virt
+      - qcom,sm8750-mmss-noc
+      - qcom,sm8750-nsp-noc
+      - qcom,sm8750-pcie-anoc
+      - qcom,sm8750-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8750-clk-virt
+              - qcom,sm8750-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8750-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8750-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8750-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8750-aggre1-noc
+              - qcom,sm8750-aggre2-noc
+              - qcom,sm8750-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clk_virt: interconnect-0 {
+      compatible = "qcom,sm8750-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,sm8750-aggre1-noc";
+      reg = <0x016e0000 0x16400>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc_phy_axi_clk>, <&gcc_prim_axi_clk>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml
new file mode 100644
index 000000000000..0840b0ec6e27
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,x1e80100-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on X1E80100
+
+maintainers:
+  - Rajendra Nayak <quic_rjendra@quicinc.com>
+  - Abel Vesa <abel.vesa@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also: include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,x1e80100-aggre1-noc
+      - qcom,x1e80100-aggre2-noc
+      - qcom,x1e80100-clk-virt
+      - qcom,x1e80100-cnoc-cfg
+      - qcom,x1e80100-cnoc-main
+      - qcom,x1e80100-gem-noc
+      - qcom,x1e80100-lpass-ag-noc
+      - qcom,x1e80100-lpass-lpiaon-noc
+      - qcom,x1e80100-lpass-lpicx-noc
+      - qcom,x1e80100-mc-virt
+      - qcom,x1e80100-mmss-noc
+      - qcom,x1e80100-nsp-noc
+      - qcom,x1e80100-pcie-center-anoc
+      - qcom,x1e80100-pcie-north-anoc
+      - qcom,x1e80100-pcie-south-anoc
+      - qcom,x1e80100-system-noc
+      - qcom,x1e80100-usb-center-anoc
+      - qcom,x1e80100-usb-north-anoc
+      - qcom,x1e80100-usb-south-anoc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,x1e80100-clk-virt
+              - qcom,x1e80100-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clk_virt: interconnect-0 {
+      compatible = "qcom,x1e80100-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,x1e80100-aggre1-noc";
+      reg = <0x016e0000 0x14400>;
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
new file mode 100644
index 000000000000..5e26e48c7217
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
@@ -0,0 +1,317 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/samsung,exynos-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Bus and Interconnect
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung Exynos SoC has many buses for data transfer between DRAM and
+  sub-blocks in SoC. Most Exynos SoCs share the common architecture for buses.
+  Generally, each bus of Exynos SoC includes a source clock and a power line,
+  which are able to change the clock frequency of the bus in runtime. To
+  monitor the usage of each bus in runtime, the driver uses the PPMU (Platform
+  Performance Monitoring Unit), which is able to measure the current load of
+  sub-blocks.
+
+  The Exynos SoC includes the various sub-blocks which have the each AXI bus.
+  The each AXI bus has the owned source clock but, has not the only owned power
+  line. The power line might be shared among one more sub-blocks.  So, we can
+  divide into two type of device as the role of each sub-block.  There are two
+  type of bus devices as following::
+   - parent bus device
+   - passive bus device
+
+  Basically, parent and passive bus device share the same power line.  The
+  parent bus device can only change the voltage of shared power line and the
+  rest bus devices (passive bus device) depend on the decision of the parent
+  bus device. If there are three blocks which share the VDD_xxx power line,
+  Only one block should be parent device and then the rest blocks should depend
+  on the parent device as passive device.
+
+    VDD_xxx |--- A block (parent)
+      |--- B block (passive)
+      |--- C block (passive)
+
+  There are a little different composition among Exynos SoC because each Exynos
+  SoC has different sub-blocks. Therefore, such difference should be specified
+  in devicetree file instead of each device driver. In result, this driver is
+  able to support the bus frequency for all Exynos SoCs.
+
+  Detailed correlation between sub-blocks and power line according
+  to Exynos SoC::
+   - In case of Exynos3250, there are two power line as following::
+     VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+     VDD_INT |--- LEFTBUS (parent device)
+       |--- PERIL
+       |--- MFC
+       |--- G3D
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- FSYS
+       |--- LCD0
+       |--- PERIR
+       |--- ISP
+       |--- CAM
+
+     - MIF bus's frequency/voltage table
+       -----------------------
+       |Lv| Freq   | Voltage |
+       -----------------------
+       |L1| 50000  |800000   |
+       |L2| 100000 |800000   |
+       |L3| 134000 |800000   |
+       |L4| 200000 |825000   |
+       |L5| 400000 |875000   |
+       -----------------------
+
+     - INT bus's frequency/voltage table
+       ----------------------------------------------------------
+       |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP    |PERIL  ||VDD_INT |
+       | name|       |LCD0    |       |       |       ||        |
+       |     |       |FSYS    |       |       |       ||        |
+       |     |       |MFC     |       |       |       ||        |
+       ----------------------------------------------------------
+       |Mode |*parent|passive |passive|passive|passive||        |
+       ----------------------------------------------------------
+       |Lv   |Frequency                               ||Voltage |
+       ----------------------------------------------------------
+       |L1   |50000  |50000   |50000  |50000  |50000  ||900000  |
+       |L2   |80000  |80000   |80000  |80000  |80000  ||900000  |
+       |L3   |100000 |100000  |100000 |100000 |100000 ||1000000 |
+       |L4   |134000 |134000  |200000 |200000 |       ||1000000 |
+       |L5   |200000 |200000  |400000 |300000 |       ||1000000 |
+       ----------------------------------------------------------
+
+   - In case of Exynos4210, there is one power line as following::
+     VDD_INT |--- DMC (parent device, Dynamic Memory Controller)
+       |--- LEFTBUS
+       |--- PERIL
+       |--- MFC(L)
+       |--- G3D
+       |--- TV
+       |--- LCD0
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- MFC(R)
+       |--- CAM
+       |--- FSYS
+       |--- GPS
+       |--- LCD0
+       |--- LCD1
+
+   - In case of Exynos4x12, there are two power line as following::
+     VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+     VDD_INT |--- LEFTBUS (parent device)
+       |--- PERIL
+       |--- MFC(L)
+       |--- G3D
+       |--- TV
+       |--- IMAGE
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- MFC(R)
+       |--- CAM
+       |--- FSYS
+       |--- GPS
+       |--- LCD0
+       |--- ISP
+
+   - In case of Exynos5422, there are two power line as following::
+     VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
+             |--- DREX 1
+
+     VDD_INT |--- NoC_Core (parent device)
+       |--- G2D
+       |--- G3D
+       |--- DISP1
+       |--- NoC_WCORE
+       |--- GSCL
+       |--- MSCL
+       |--- ISP
+       |--- MFC
+       |--- GEN
+       |--- PERIS
+       |--- PERIC
+       |--- FSYS
+       |--- FSYS2
+
+   - In case of Exynos5433, there is VDD_INT power line as following::
+     VDD_INT |--- G2D (parent device)
+       |--- MSCL
+       |--- GSCL
+       |--- JPEG
+       |--- MFC
+       |--- HEVC
+       |--- BUS0
+       |--- BUS1
+       |--- BUS2
+       |--- PERIS (Fixed clock rate)
+       |--- PERIC (Fixed clock rate)
+       |--- FSYS  (Fixed clock rate)
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos-bus
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: bus
+
+  devfreq:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Parent bus device. Valid and required only for the passive bus devices.
+
+  devfreq-events:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    description:
+      Devfreq-event device to monitor the current utilization of buses. Valid
+      and required only for the parent bus devices.
+
+  exynos,saturation-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Percentage value which is used to calibrate the performance count against
+      total cycle count.  Valid only for the parent bus devices.
+
+  '#interconnect-cells':
+    const: 0
+
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  samsung,data-clock-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    description:
+      Ratio of the data throughput in B/s to minimum data clock frequency in
+      Hz.
+
+  vdd-supply:
+    description:
+      Main bus power rail. Valid and required only for the parent bus devices.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos3250.h>
+
+    bus-dmc {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu_dmc CLK_DIV_DMC>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_dmc_opp_table>;
+        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+        vdd-supply = <&buck1_reg>;
+
+        bus_dmc_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-50000000 {
+                opp-hz = /bits/ 64 <50000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-100000000 {
+                opp-hz = /bits/ 64 <100000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-134000000 {
+                opp-hz = /bits/ 64 <134000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                opp-microvolt = <825000>;
+            };
+            opp-400000000 {
+                opp-hz = /bits/ 64 <400000000>;
+                opp-microvolt = <875000>;
+            };
+        };
+    };
+
+    ppmu_dmc0: ppmu@106a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x106a0000 0x2000>;
+        events {
+            ppmu_dmc0_3: ppmu-event3-dmc0 {
+                event-name = "ppmu-event3-dmc0";
+            };
+        };
+    };
+
+    bus_leftbus: bus-leftbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu CLK_DIV_GDL>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+        vdd-supply = <&buck3_reg>;
+    };
+
+    bus-rightbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu CLK_DIV_GDR>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        devfreq = <&bus_leftbus>;
+    };
+
+  - |
+    dmc: bus-dmc {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_DMC>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_dmc_opp_table>;
+        samsung,data-clock-ratio = <4>;
+        #interconnect-cells = <0>;
+        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+        vdd-supply = <&buck1_reg>;
+    };
+
+    leftbus: bus-leftbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_GDL>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        interconnects = <&dmc>;
+        #interconnect-cells = <0>;
+        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+        vdd-supply = <&buck3_reg>;
+    };
+
+    display: bus-display {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_ACLK_266>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_display_opp_table>;
+        interconnects = <&leftbus &dmc>;
+        #interconnect-cells = <0>;
+        devfreq = <&leftbus>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
deleted file mode 100644
index 5a4dd263fc12..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-TB10x Top Level Interrupt Controller
-====================================
-
-The Abilis TB10x SOC contains a custom interrupt controller. It performs
-one-to-one mapping of external interrupt sources to CPU interrupts and
-provides support for reconfigurable trigger modes.
-
-Required properties
--------------------
-
-- compatible: Should be "abilis,tb10x-ictl"
-- reg: specifies physical base address and size of register range.
-- interrupt-congroller: Identifies the node as an interrupt controller.
-- #interrupt cells: Specifies the number of cells used to encode an interrupt
-  source connected to this controller. The value shall be 2.
-- interrupts: Specifies the list of interrupt lines which are handled by
-  the interrupt controller in the parent controller's notation. Interrupts
-  are mapped one-to-one to parent interrupts.
-
-Example
--------
-
-intc: interrupt-controller {	/* Parent interrupt controller */
-	interrupt-controller;
-	#interrupt-cells = <1>;	/* For example below */
-	/* ... */
-};
-
-tb10x_ictl: pic@2000 {		/* TB10x interrupt controller */
-	compatible = "abilis,tb10x-ictl";
-	reg = <0x2000 0x20>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupt-parent = <&intc>;
-	interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
-			20 21 22 23 24 25 26 27 28 29 30 31>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.yaml b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.yaml
new file mode 100644
index 000000000000..cd2c49670e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/abilis,tb10x-ictl.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/abilis,tb10x-ictl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TB10x Top Level Interrupt Controller
+
+maintainers:
+  - Christian Ruppert <christian.ruppert@abilis.com>
+
+description:
+  The Abilis TB10x SOC contains a custom interrupt controller. It performs
+  one-to-one mapping of external interrupt sources to CPU interrupts and
+  provides support for reconfigurable trigger modes.
+
+properties:
+  compatible:
+    const: abilis,tb10x-ictl
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: A one-to-one mapping of external interrupt sources to parent
+      interrupts.
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@2000 {
+        compatible = "abilis,tb10x-ictl";
+        reg = <0x2000 0x20>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <5>, <6>, <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>,
+                     <15>, <16>, <17>, <18>, <19>, <20>, <21>, <22>, <23>,
+                     <24>, <25>, <26>, <27>, <28>, <29>, <30>, <31>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
index 5da333c644c9..27756d0c5419 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
@@ -32,7 +32,7 @@ properties:
       The first cell is the input IRQ number, between 0 and 2, while the second
       cell is the trigger type as defined in interrupt.txt in this directory.
 
-  'interrupts':
+  interrupts:
     description: |
       Contains the GIC SPI IRQs mapped to the external interrupt lines.
       They shall be specified sequentially from output 0 to 2.
@@ -44,7 +44,7 @@ required:
   - reg
   - interrupt-controller
   - '#interrupt-cells'
-  - 'interrupts'
+  - interrupts
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
deleted file mode 100644
index 5669764f9cc9..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Alpine MSIX controller
-
-See arm,gic-v3.txt for SPI and MSI definitions.
-
-Required properties:
-
-- compatible: should be "al,alpine-msix"
-- reg: physical base address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- msi-controller: identifies the node as an PCI Message Signaled Interrupt
-		  controller
-- al,msi-base-spi: SPI base of the MSI frame
-- al,msi-num-spis: number of SPIs assigned to the MSI frame, relative to SPI0
-
-Example:
-
-msix: msix {
-	compatible = "al,alpine-msix";
-	reg = <0x0 0xfbe00000 0x0 0x100000>;
-	interrupt-parent = <&gic>;
-	interrupt-controller;
-	msi-controller;
-	al,msi-base-spi = <160>;
-	al,msi-num-spis = <160>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.yaml b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.yaml
new file mode 100644
index 000000000000..9f1ff8ec686f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/al,alpine-msix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Alpine MSIX controller
+
+maintainers:
+  - Antoine Tenart <atenart@kernel.org>
+
+properties:
+  compatible:
+    const: al,alpine-msix
+
+  reg:
+    maxItems: 1
+
+  interrupt-parent: true
+
+  msi-controller: true
+
+  al,msi-base-spi:
+    description: SPI base of the MSI frame
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  al,msi-num-spis:
+    description: number of SPIs assigned to the MSI frame, relative to SPI0
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - msi-controller
+  - al,msi-base-spi
+  - al,msi-num-spis
+
+additionalProperties: false
+
+examples:
+  - |
+    msi-controller@fbe00000 {
+        compatible = "al,alpine-msix";
+        reg = <0xfbe00000 0x100000>;
+        interrupt-parent = <&gic>;
+        msi-controller;
+        al,msi-base-spi = <160>;
+        al,msi-num-spis = <160>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
index 953d875b5e74..a713633be733 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun4i-a10-ic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Interrupt Controller Device Tree Bindings
+title: Allwinner A10 Interrupt Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
index 4db24b8a9ffe..4fa6fd400eef 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 NMI/Wakeup Interrupt Controller Device Tree Bindings
+title: Allwinner A31 NMI/Wakeup Interrupt Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
index 7fc9ad5ef38c..06e3621a8c06 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 Non-Maskable Interrupt Controller Device Tree Bindings
+title: Allwinner A20 Non-Maskable Interrupt Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -25,12 +25,13 @@ properties:
       - const: allwinner,sun6i-a31-sc-nmi
         deprecated: true
       - const: allwinner,sun7i-a20-sc-nmi
-      - items:
-          - const: allwinner,sun8i-v3s-nmi
-          - const: allwinner,sun9i-a80-nmi
       - const: allwinner,sun9i-a80-nmi
+      - const: allwinner,sun55i-a523-nmi
       - items:
-          - const: allwinner,sun50i-a100-nmi
+          - enum:
+              - allwinner,sun8i-v3s-nmi
+              - allwinner,sun50i-a100-nmi
+              - allwinner,sun50i-h616-nmi
           - const: allwinner,sun9i-a80-nmi
 
   reg:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/altr,msi-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/altr,msi-controller.yaml
new file mode 100644
index 000000000000..d046954b8a27
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/altr,msi-controller.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2015, 2024, Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/altr,msi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera PCIe MSI controller
+
+maintainers:
+  - Matthew Gerlach <matthew.gerlach@linux.intel.com>
+
+properties:
+  compatible:
+    enum:
+      - altr,msi-1.0
+
+  reg:
+    items:
+      - description: CSR registers
+      - description: Vectors slave port region
+
+  reg-names:
+    items:
+      - const: csr
+      - const: vector_slave
+
+  interrupts:
+    maxItems: 1
+
+  msi-controller: true
+
+  num-vectors:
+    description: number of vectors
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - msi-controller
+  - num-vectors
+
+allOf:
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    msi@ff200000 {
+        compatible = "altr,msi-1.0";
+        reg = <0xff200000 0x00000010>,
+              <0xff200010 0x00000080>;
+        reg-names = "csr", "vector_slave";
+        interrupt-parent = <&hps_0_arm_gic_0>;
+        interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+        msi-controller;
+        num-vectors = <32>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
deleted file mode 100644
index c676b03c752e..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Amazon's Annapurna Labs Fabric Interrupt Controller
-
-Required properties:
-
-- compatible: should be "amazon,al-fic"
-- reg: physical base address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells : must be 2. Specifies the number of cells needed to encode
-  an interrupt source. Supported trigger types are low-to-high edge
-  triggered and active high level-sensitive.
-- interrupts: describes which input line in the interrupt parent, this
-  fic's output is connected to. This field property depends on the parent's
-  binding
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Example:
-
-amazon_fic: interrupt-controller@fd8a8500 {
-	compatible = "amazon,al-fic";
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	reg = <0x0 0xfd8a8500 0x0 0x1000>;
-	interrupt-parent = <&gic>;
-	interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.yaml b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.yaml
new file mode 100644
index 000000000000..26bc05dee0bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/amazon,al-fic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amazon Annapurna Labs Fabric Interrupt Controller
+
+maintainers:
+  - Talel Shenhar <talel@amazon.com>
+
+properties:
+  compatible:
+    const: amazon,al-fic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@fd8a8500 {
+        compatible = "amazon,al-fic";
+        reg = <0xfd8a8500 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
deleted file mode 100644
index 23b18b92c558..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Amlogic meson GPIO interrupt controller
-
-Meson SoCs contains an interrupt controller which is able to watch the SoC
-pads and generate an interrupt on edge or level. The controller is essentially
-a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge
-or level and polarity. It does not expose all 256 mux inputs because the
-documentation shows that the upper part is not mapped to any pad. The actual
-number of interrupt exposed depends on the SoC.
-
-Required properties:
-
-- compatible : must have "amlogic,meson8-gpio-intc" and either
-    "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or
-    "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or
-    "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
-    "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
-    "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
-    "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
-    "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
-    "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-   interrupt source. The value must be 2.
-- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These
-   are the hwirqs used on the parent interrupt controller.
-
-Example:
-
-gpio_interrupt: interrupt-controller@9880 {
-	compatible = "amlogic,meson-gxbb-gpio-intc",
-		     "amlogic,meson-gpio-intc";
-	reg = <0x0 0x9880 0x0 0x10>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	meson,channel-interrupts = <64 65 66 67 68 69 70 71>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
new file mode 100644
index 000000000000..d0fad930de9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/amlogic,meson-gpio-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson GPIO interrupt controller
+
+maintainers:
+  - Heiner Kallweit <hkallweit1@gmail.com>
+
+description: |
+  Meson SoCs contains an interrupt controller which is able to watch the SoC
+  pads and generate an interrupt on edge or level. The controller is essentially
+  a 256 pads to 8 or 12 GIC interrupt multiplexer, with a filter block to select
+  edge or level and polarity. It does not expose all 256 mux inputs because the
+  documentation shows that the upper part is not mapped to any pad. The actual
+  number of interrupts exposed depends on the SoC.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-gpio-intc
+      - items:
+          - enum:
+              - amlogic,meson8-gpio-intc
+              - amlogic,meson8b-gpio-intc
+              - amlogic,meson-gxbb-gpio-intc
+              - amlogic,meson-gxl-gpio-intc
+              - amlogic,meson-axg-gpio-intc
+              - amlogic,meson-g12a-gpio-intc
+              - amlogic,meson-sm1-gpio-intc
+              - amlogic,meson-a1-gpio-intc
+              - amlogic,meson-s4-gpio-intc
+              - amlogic,a4-gpio-intc
+              - amlogic,a4-gpio-ao-intc
+              - amlogic,a5-gpio-intc
+              - amlogic,c3-gpio-intc
+              - amlogic,s6-gpio-intc
+              - amlogic,s7-gpio-intc
+              - amlogic,s7d-gpio-intc
+              - amlogic,t7-gpio-intc
+          - const: amlogic,meson-gpio-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  amlogic,channel-interrupts:
+    description: Array with the upstream hwirq numbers
+    minItems: 2
+    maxItems: 12
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - amlogic,channel-interrupts
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: amlogic,a4-gpio-ao-intc
+then:
+  properties:
+    amlogic,channel-interrupts:
+      maxItems: 2
+else:
+  properties:
+    amlogic,channel-interrupts:
+      minItems: 8
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@9880 {
+      compatible = "amlogic,meson-gxbb-gpio-intc",
+                   "amlogic,meson-gpio-intc";
+      reg = <0x9880 0x10>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt b/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt
deleted file mode 100644
index f4b4193d830e..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Andestech Internal Vector Interrupt Controller
-
-The Internal Vector Interrupt Controller (IVIC) is a basic interrupt controller
-suitable for a simpler SoC platform not requiring a more sophisticated and
-bigger External Vector Interrupt Controller.
-
-
-Main node required properties:
-
-- compatible : should at least contain  "andestech,ativic32".
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells: 1 cells and refer to interrupt-controller/interrupts
-
-Examples:
-	intc: interrupt-controller {
-		compatible = "andestech,ativic32";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/andestech,plicsw.yaml b/Documentation/devicetree/bindings/interrupt-controller/andestech,plicsw.yaml
new file mode 100644
index 000000000000..eb2eb611ac09
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/andestech,plicsw.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/andestech,plicsw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Andes machine-level software interrupt controller
+
+description:
+  In the Andes platform such as QiLai SoC, the PLIC module is instantiated a
+  second time with all interrupt sources tied to zero as the software interrupt
+  controller (PLIC_SW). PLIC_SW directly connects to the machine-mode
+  inter-processor interrupt lines of CPUs, so RISC-V per-CPU local interrupt
+  controller is the parent interrupt controller for PLIC_SW. PLIC_SW can
+  generate machine-mode inter-processor interrupts through programming its
+  registers.
+
+maintainers:
+  - Ben Zong-You Xie <ben717@andestech.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - andestech,qilai-plicsw
+      - const: andestech,plicsw
+
+  reg:
+    maxItems: 1
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 15872
+    description:
+      Specifies which harts are connected to the PLIC_SW. Each item must points
+      to a riscv,cpu-intc node, which has a riscv cpu node as parent.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+
+examples:
+  - |
+    interrupt-controller@400000 {
+      compatible = "andestech,qilai-plicsw", "andestech,plicsw";
+      reg = <0x400000 0x400000>;
+      interrupts-extended = <&cpu0intc 3>,
+                            <&cpu1intc 3>,
+                            <&cpu2intc 3>,
+                            <&cpu3intc 3>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/apm,xgene1-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/apm,xgene1-msi.yaml
new file mode 100644
index 000000000000..49db952697f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/apm,xgene1-msi.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apm,xgene1-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AppliedMicro X-Gene v1 PCIe MSI controller
+
+maintainers:
+  - Toan Le <toan@os.amperecomputing.com>
+
+properties:
+  compatible:
+    const: apm,xgene1-msi
+
+  msi-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 16
+
+required:
+  - compatible
+  - msi-controller
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    msi@79000000 {
+        compatible = "apm,xgene1-msi";
+        msi-controller;
+        reg = <0x79000000 0x900000>;
+        interrupts = <0x0 0x10 0x4>,
+                     <0x0 0x11 0x4>,
+                     <0x0 0x12 0x4>,
+                     <0x0 0x13 0x4>,
+                     <0x0 0x14 0x4>,
+                     <0x0 0x15 0x4>,
+                     <0x0 0x16 0x4>,
+                     <0x0 0x17 0x4>,
+                     <0x0 0x18 0x4>,
+                     <0x0 0x19 0x4>,
+                     <0x0 0x1a 0x4>,
+                     <0x0 0x1b 0x4>,
+                     <0x0 0x1c 0x4>,
+                     <0x0 0x1d 0x4>,
+                     <0x0 0x1e 0x4>,
+                     <0x0 0x1f 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
index cf6c091a07b1..4be9b596a790 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
@@ -31,13 +31,25 @@ description: |
   This device also represents the FIQ interrupt sources on platforms using AIC,
   which do not go through a discrete interrupt controller.
 
+  IPIs may be performed via MMIO registers on all variants of AIC. Starting
+  from A11, system registers may also be used for "fast" IPIs. Starting from
+  M1, even faster IPIs within the same cluster may be achieved by writing to
+  a "local" fast IPI register as opposed to using the "global" fast IPI
+  register.
+
 allOf:
   - $ref: /schemas/interrupt-controller.yaml#
 
 properties:
   compatible:
     items:
-      - const: apple,t8103-aic
+      - enum:
+          - apple,s5l8960x-aic
+          - apple,t7000-aic
+          - apple,s8000-aic
+          - apple,t8010-aic
+          - apple,t8015-aic
+          - apple,t8103-aic
       - const: apple,aic
 
   interrupt-controller: true
@@ -56,6 +68,8 @@ properties:
           - 1: virtual HV timer
           - 2: physical guest timer
           - 3: virtual guest timer
+          - 4: 'efficient' CPU PMU
+          - 5: 'performance' CPU PMU
 
       The 3rd cell contains the interrupt flags. This is normally
       IRQ_TYPE_LEVEL_HIGH (4).
@@ -65,6 +79,37 @@ properties:
       Specifies base physical address and size of the AIC registers.
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
+  affinities:
+    type: object
+    additionalProperties: false
+    description:
+      FIQ affinity can be expressed as a single "affinities" node,
+      containing a set of sub-nodes, one per FIQ with a non-default
+      affinity.
+    patternProperties:
+      "^.+-affinity$":
+        type: object
+        additionalProperties: false
+        properties:
+          apple,fiq-index:
+            description:
+              The interrupt number specified as a FIQ, and for which
+              the affinity is not the default.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 5
+
+          cpus:
+            description:
+              Should be a list of phandles to CPU nodes (as described in
+              Documentation/devicetree/bindings/arm/cpus.yaml).
+
+        required:
+          - apple,fiq-index
+          - cpus
+
 required:
   - compatible
   - '#interrupt-cells'
diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml
new file mode 100644
index 000000000000..ee5a0dfff437
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apple,aic2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Interrupt Controller 2
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  The Apple Interrupt Controller 2 is a simple interrupt controller present on
+  Apple ARM SoC platforms starting with t600x (M1 Pro and Max).
+
+  It provides the following features:
+
+  - Level-triggered hardware IRQs wired to SoC blocks
+    - Single mask bit per IRQ
+    - Automatic masking on event delivery (auto-ack)
+    - Software triggering (ORed with hw line)
+  - Automatic prioritization (single event/ack register per CPU, lower IRQs =
+    higher priority)
+  - Automatic masking on ack
+  - Support for multiple dies
+
+  This device also represents the FIQ interrupt sources on platforms using AIC,
+  which do not go through a discrete interrupt controller. It also handles
+  FIQ-based Fast IPIs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8112-aic
+          - apple,t6000-aic
+          - apple,t6020-aic
+      - const: apple,aic2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    minimum: 3
+    maximum: 4
+    description: |
+      The 1st cell contains the interrupt type:
+        - 0: Hardware IRQ
+        - 1: FIQ
+
+      The 2nd cell contains the die ID (only present on apple,t6000-aic).
+
+      The next cell contains the interrupt number.
+        - HW IRQs: interrupt number
+        - FIQs:
+          - 0: physical HV timer
+          - 1: virtual HV timer
+          - 2: physical guest timer
+          - 3: virtual guest timer
+
+      The last cell contains the interrupt flags. This is normally
+      IRQ_TYPE_LEVEL_HIGH (4).
+
+  reg:
+    items:
+      - description: Address and size of the main AIC2 registers.
+      - description: Address and size of the AIC2 Event register.
+
+  reg-names:
+    items:
+      - const: core
+      - const: event
+
+  power-domains:
+    maxItems: 1
+
+  affinities:
+    type: object
+    additionalProperties: false
+    description:
+      FIQ affinity can be expressed as a single "affinities" node,
+      containing a set of sub-nodes, one per FIQ with a non-default
+      affinity.
+    patternProperties:
+      "^.+-affinity$":
+        type: object
+        additionalProperties: false
+        properties:
+          apple,fiq-index:
+            description:
+              The interrupt number specified as a FIQ, and for which
+              the affinity is not the default.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 5
+
+          cpus:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            description:
+              Should be a list of phandles to CPU nodes (as described in
+              Documentation/devicetree/bindings/arm/cpus.yaml).
+
+        required:
+          - apple,fiq-index
+          - cpus
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: apple,t8112-aic
+    then:
+      properties:
+        '#interrupt-cells':
+          const: 3
+    else:
+      properties:
+        '#interrupt-cells':
+          const: 4
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aic: interrupt-controller@28e100000 {
+            compatible = "apple,t6000-aic", "apple,aic2";
+            #interrupt-cells = <4>;
+            interrupt-controller;
+            reg = <0x2 0x8e100000 0x0 0xc000>,
+                  <0x2 0x8e10c000 0x0 0x4>;
+            reg-names = "core", "event";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index c84f9fe7f254..bfd30aae682b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM Generic Interrupt Controller, version 3
 
 maintainers:
-  - Marc Zyngier <marc.zyngier@arm.com>
+  - Marc Zyngier <maz@kernel.org>
 
 description: |
   AArch64 SMP cores are often associated with a GICv3, providing Private
@@ -49,7 +49,7 @@ properties:
 
       The 2nd cell contains the interrupt number for the interrupt type.
       SPI interrupts are in the range [0-987]. PPI interrupts are in the
-      range [0-15]. Extented SPI interrupts are in the range [0-1023].
+      range [0-15]. Extended SPI interrupts are in the range [0-1023].
       Extended PPI interrupts are in the range [0-127].
 
       The 3rd cell is the flags, encoded as follows:
@@ -60,7 +60,7 @@ properties:
       The 4th cell is a phandle to a node describing a set of CPUs this
       interrupt is affine to. The interrupt must be a PPI, and the node
       pointed must be a subnode of the "ppi-partitions" subnode. For
-      interrupt types other than PPI or PPIs that are not partitionned,
+      interrupt types other than PPI or PPIs that are not partitioned,
       this cell must be zero. See the "ppi-partitions" node description
       below.
 
@@ -78,7 +78,11 @@ properties:
       - GIC Hypervisor interface (GICH)
       - GIC Virtual CPU interface (GICV)
 
-      GICC, GICH and GICV are optional.
+      GICC, GICH and GICV are optional, but must be described if the CPUs
+      support them. Examples of such CPUs are ARM's implementations of the
+      ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and
+      A73 (this list is not exhaustive).
+
     minItems: 2
     maxItems: 4096   # Should be enough?
 
@@ -102,9 +106,15 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 4096
 
+  dma-noncoherent:
+    description:
+      Present if the GIC redistributors permit programming shareability
+      and cacheability attributes but are connected to a non-coherent
+      downstream interconnect.
+
   msi-controller:
     description:
-      Only present if the Message Based Interrupt functionnality is
+      Only present if the Message Based Interrupt functionality is
       being exposed by the HW, and the mbi-ranges property present.
 
   mbi-ranges:
@@ -122,22 +132,25 @@ properties:
       Address property. Base address of an alias of the GICD region containing
       only the {SET,CLR}SPI registers to be used if isolation is required,
       and if supported by the HW.
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-    items:
-      minItems: 1
-      maxItems: 2
+    oneOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - $ref: /schemas/types.yaml#/definitions/uint64
 
   ppi-partitions:
     type: object
+    additionalProperties: false
     description:
       PPI affinity can be expressed as a single "ppi-partitions" node,
       containing a set of sub-nodes.
     patternProperties:
       "^interrupt-partition-[0-9]+$":
         type: object
+        additionalProperties: false
         properties:
           affinity:
             $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              maxItems: 1
             description:
               Should be a list of phandles to CPU nodes (as described in
               Documentation/devicetree/bindings/arm/cpus.yaml).
@@ -158,13 +171,18 @@ properties:
   resets:
     maxItems: 1
 
+  mediatek,broken-save-restore-fw:
+    type: boolean
+    description:
+      Asserts that the firmware on this device has issues saving and restoring
+      GICR registers when the GIC redistributors are powered off.
+
 dependencies:
   mbi-ranges: [ msi-controller ]
   msi-controller: [ mbi-ranges ]
 
 required:
   - compatible
-  - interrupts
   - reg
 
 patternProperties:
@@ -180,6 +198,12 @@ patternProperties:
       compatible:
         const: arm,gic-v3-its
 
+      dma-noncoherent:
+        description:
+          Present if the GIC ITS permits programming shareability and
+          cacheability attributes but is connected to a non-coherent
+          downstream interconnect.
+
       msi-controller: true
 
       "#msi-cells":
@@ -198,9 +222,8 @@ patternProperties:
           (u32, u32) tuple describing the untranslated
           address and size of the pre-ITS window.
         $ref: /schemas/types.yaml#/definitions/uint32-array
-        items:
-          minItems: 2
-          maxItems: 2
+        minItems: 2
+        maxItems: 2
 
     required:
       - compatible
@@ -239,6 +262,7 @@ examples:
       };
     };
 
+  - |
     interrupt-controller@2c010000 {
       compatible = "arm,gic-v3";
       #interrupt-cells = <4>;
@@ -254,7 +278,7 @@ examples:
             <0x2c040000 0x2000>,  // GICC
             <0x2c060000 0x2000>,  // GICH
             <0x2c080000 0x2000>;  // GICV
-      interrupts = <1 9 4>;
+      interrupts = <1 9 4 0>;
 
       msi-controller@2c200000 {
         compatible = "arm,gic-v3-its";
@@ -272,16 +296,15 @@ examples:
 
       ppi-partitions {
         part0: interrupt-partition-0 {
-          affinity = <&cpu0 &cpu2>;
+          affinity = <&cpu0>, <&cpu2>;
         };
 
         part1: interrupt-partition-1 {
-          affinity = <&cpu1 &cpu3>;
+          affinity = <&cpu1>, <&cpu3>;
         };
       };
     };
 
-
     device@0 {
       reg = <0 4>;
       interrupts = <1 1 4 &part0>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v5-iwb.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v5-iwb.yaml
new file mode 100644
index 000000000000..99a266a62385
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v5-iwb.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v5-iwb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller, version 5 Interrupt Wire Bridge (IWB)
+
+maintainers:
+  - Lorenzo Pieralisi <lpieralisi@kernel.org>
+  - Marc Zyngier <maz@kernel.org>
+
+description: |
+  The GICv5 architecture defines the guidelines to implement GICv5
+  compliant interrupt controllers for AArch64 systems.
+
+  The GICv5 specification can be found at
+  https://developer.arm.com/documentation/aes0070
+
+  GICv5 has zero or more Interrupt Wire Bridges (IWB) that are responsible
+  for translating wire signals into interrupt messages to the GICv5 ITS.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: arm,gic-v5-iwb
+
+  reg:
+    items:
+      - description: IWB control frame
+
+  "#address-cells":
+    const: 0
+
+  "#interrupt-cells":
+    description: |
+      The 1st cell corresponds to the IWB wire.
+
+      The 2nd cell is the flags, encoded as follows:
+      bits[3:0] trigger type and level flags.
+
+      1 = low-to-high edge triggered
+      2 = high-to-low edge triggered
+      4 = active high level-sensitive
+      8 = active low level-sensitive
+
+    const: 2
+
+  interrupt-controller: true
+
+  msi-parent:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+  - msi-parent
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@2f000000 {
+      compatible = "arm,gic-v5-iwb";
+      reg = <0x2f000000 0x10000>;
+
+      #address-cells = <0>;
+
+      #interrupt-cells = <2>;
+      interrupt-controller;
+
+      msi-parent = <&its0 64>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v5.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v5.yaml
new file mode 100644
index 000000000000..86ca7f3ac281
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v5.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Generic Interrupt Controller, version 5
+
+maintainers:
+  - Lorenzo Pieralisi <lpieralisi@kernel.org>
+  - Marc Zyngier <maz@kernel.org>
+
+description: |
+  The GICv5 architecture defines the guidelines to implement GICv5
+  compliant interrupt controllers for AArch64 systems.
+
+  The GICv5 specification can be found at
+  https://developer.arm.com/documentation/aes0070
+
+  The GICv5 architecture is composed of multiple components:
+    - one or more IRS (Interrupt Routing Service)
+    - zero or more ITS (Interrupt Translation Service)
+
+  The architecture defines:
+    - PE-Private Peripheral Interrupts (PPI)
+    - Shared Peripheral Interrupts (SPI)
+    - Logical Peripheral Interrupts (LPI)
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: arm,gic-v5
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  "#interrupt-cells":
+    description: |
+      The 1st cell corresponds to the INTID.Type field in the INTID; 1 for PPI,
+      3 for SPI. LPI interrupts must not be described in the bindings since
+      they are allocated dynamically by the software component managing them.
+
+      The 2nd cell contains the interrupt INTID.ID field.
+
+      The 3rd cell is the flags, encoded as follows:
+      bits[3:0] trigger type and level flags.
+
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+
+    const: 3
+
+  interrupt-controller: true
+
+  interrupts:
+    description:
+      The VGIC maintenance interrupt.
+    maxItems: 1
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - "#interrupt-cells"
+  - interrupt-controller
+
+patternProperties:
+  "^irs@[0-9a-f]+$":
+    type: object
+    description:
+      GICv5 has one or more Interrupt Routing Services (IRS) that are
+      responsible for handling IRQ state and routing.
+
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: arm,gic-v5-irs
+
+      reg:
+        minItems: 1
+        items:
+          - description: IRS config frames
+          - description: IRS setlpi frames
+
+      reg-names:
+        description:
+          Describe config and setlpi frames that are present.
+          "ns-" stands for non-secure, "s-" for secure, "realm-" for realm
+          and "el3-" for EL3.
+        minItems: 1
+        maxItems: 8
+        items:
+          enum: [ ns-config, s-config, realm-config, el3-config, ns-setlpi,
+                  s-setlpi, realm-setlpi, el3-setlpi ]
+
+      "#address-cells":
+        enum: [ 1, 2 ]
+
+      "#size-cells":
+        enum: [ 1, 2 ]
+
+      ranges: true
+
+      dma-noncoherent:
+        description:
+          Present if the GIC IRS permits programming shareability and
+          cacheability attributes but is connected to a non-coherent
+          downstream interconnect.
+
+      cpus:
+        description:
+          CPUs managed by the IRS.
+
+      arm,iaffids:
+        $ref: /schemas/types.yaml#/definitions/uint16-array
+        description:
+          Interrupt AFFinity ID (IAFFID) associated with the CPU whose
+          CPU node phandle is at the same index in the cpus array.
+
+    patternProperties:
+      "^its@[0-9a-f]+$":
+        type: object
+        description:
+          GICv5 has zero or more Interrupt Translation Services (ITS) that are
+          used to route Message Signalled Interrupts (MSI) to the CPUs. Each
+          ITS is connected to an IRS.
+        additionalProperties: false
+
+        properties:
+          compatible:
+            const: arm,gic-v5-its
+
+          reg:
+            items:
+              - description: ITS config frames
+
+          reg-names:
+            description:
+              Describe config frames that are present.
+              "ns-" stands for non-secure, "s-" for secure, "realm-" for realm
+              and "el3-" for EL3.
+            minItems: 1
+            maxItems: 4
+            items:
+              enum: [ ns-config, s-config, realm-config, el3-config ]
+
+          "#address-cells":
+            enum: [ 1, 2 ]
+
+          "#size-cells":
+            enum: [ 1, 2 ]
+
+          ranges: true
+
+          dma-noncoherent:
+            description:
+              Present if the GIC ITS permits programming shareability and
+              cacheability attributes but is connected to a non-coherent
+              downstream interconnect.
+
+        patternProperties:
+          "^msi-controller@[0-9a-f]+$":
+            type: object
+            description:
+              GICv5 ITS has one or more translate register frames.
+            additionalProperties: false
+
+            properties:
+              reg:
+                items:
+                  - description: ITS translate frames
+
+              reg-names:
+                description:
+                  Describe translate frames that are present.
+                  "ns-" stands for non-secure, "s-" for secure, "realm-" for realm
+                  and "el3-" for EL3.
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ ns-translate, s-translate, realm-translate, el3-translate ]
+
+              "#msi-cells":
+                description:
+                  The single msi-cell is the DeviceID of the device which will
+                  generate the MSI.
+                const: 1
+
+              msi-controller: true
+
+            required:
+              - reg
+              - reg-names
+              - "#msi-cells"
+              - msi-controller
+
+        required:
+          - compatible
+          - reg
+          - reg-names
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - cpus
+      - arm,iaffids
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+      compatible = "arm,gic-v5";
+
+      #interrupt-cells = <3>;
+      interrupt-controller;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges;
+
+      interrupts = <1 25 4>;
+
+      irs@2f1a0000 {
+        compatible = "arm,gic-v5-irs";
+        reg = <0x2f1a0000 0x10000>;  // IRS_CONFIG_FRAME
+        reg-names = "ns-config";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+        arm,iaffids = /bits/ 16 <0 1 2 3 4 5 6 7>;
+
+        its@2f120000 {
+          compatible = "arm,gic-v5-its";
+          reg = <0x2f120000 0x10000>;   // ITS_CONFIG_FRAME
+          reg-names = "ns-config";
+
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges;
+
+          msi-controller@2f130000 {
+            reg = <0x2f130000 0x10000>;   // ITS_TRANSLATE_FRAME
+            reg-names = "ns-translate";
+
+            #msi-cells = <1>;
+            msi-controller;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
index ba282f4c9fd0..ee4c77dac201 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -58,14 +58,16 @@ properties:
               - enum:
                   - nvidia,tegra186-agic
                   - nvidia,tegra194-agic
+                  - nvidia,tegra234-agic
+                  - nvidia,tegra264-agic
               - const: nvidia,tegra210-agic
 
   interrupt-controller: true
 
   "#address-cells":
-    enum: [ 0, 1 ]
+    enum: [ 0, 1, 2 ]
   "#size-cells":
-    const: 1
+    enum: [ 1, 2 ]
 
   "#interrupt-cells":
     const: 3
@@ -109,8 +111,8 @@ properties:
 
   interrupts:
     description: Interrupt source of the parent interrupt controller on
-      secondary GICs, or VGIC maintenance interrupt on primary GIC (see
-      below).
+      secondary GICs, or VGIC maintenance interrupt on primary GIC (see "GICv2
+      with virtualization extensions" paragraph in the "reg" property).
     maxItems: 1
 
   cpu-offset:
@@ -132,8 +134,8 @@ properties:
       - items: # for "arm,cortex-a9-gic"
           - const: PERIPHCLK
           - const: PERIPHCLKEN
-      - const: clk # for "arm,gic-400" and "nvidia,tegra210"
-      - const: gclk #for "arm,pl390"
+      - const: clk  # for "arm,gic-400" and "nvidia,tegra210"
+      - const: gclk # for "arm,pl390"
 
   power-domains:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt
deleted file mode 100644
index 386ab37a383f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* ARM Nested Vector Interrupt Controller (NVIC)
-
-The NVIC provides an interrupt controller that is tightly coupled to
-Cortex-M based processor cores.  The NVIC implemented on different SoCs
-vary in the number of interrupts and priority bits per interrupt.
-
-Main node required properties:
-
-- compatible : should be one of:
-	"arm,v6m-nvic"
-	"arm,v7m-nvic"
-	"arm,v8m-nvic"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source.  The type shall be a <u32> and the value shall be 2.
-
-  The 1st cell contains the interrupt number for the interrupt type.
-
-  The 2nd cell is the priority of the interrupt.
-
-- reg : Specifies base physical address(s) and size of the NVIC registers.
-  This is at a fixed address (0xe000e100) and size (0xc00).
-
-- arm,num-irq-priority-bits: The number of priority bits implemented by the
-  given SoC
-
-Example:
-
-	intc: interrupt-controller@e000e100 {
-		compatible = "arm,v7m-nvic";
-		#interrupt-cells = <2>;
-		#address-cells = <1>;
-		interrupt-controller;
-		reg = <0xe000e100 0xc00>;
-		arm,num-irq-priority-bits = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml
new file mode 100644
index 000000000000..32dfa2bf05d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,nvic.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,nvic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Nested Vector Interrupt Controller (NVIC)
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  The NVIC provides an interrupt controller that is tightly coupled to Cortex-M
+  based processor cores.  The NVIC implemented on different SoCs vary in the
+  number of interrupts and priority bits per interrupt.
+
+properties:
+  compatible:
+    enum:
+      - arm,armv7m-nvic # deprecated
+      - arm,v6m-nvic
+      - arm,v7m-nvic
+      - arm,v8m-nvic
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    enum: [1, 2]
+    description: |
+      Number of cells to encode an interrupt source:
+      first = interrupt number, second = priority.
+
+  arm,num-irq-priority-bits:
+    description: Number of priority bits implemented by the SoC
+    minimum: 1
+    maximum: 8
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - arm,num-irq-priority-bits
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@e000e100 {
+        compatible = "arm,v7m-nvic";
+        #interrupt-cells = <2>;
+        #address-cells = <0>;
+        interrupt-controller;
+        reg = <0xe000e100 0xc00>;
+        arm,num-irq-priority-bits = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
deleted file mode 100644
index 2a1d16bdf834..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* ARM Versatile FPGA interrupt controller
-
-One or more FPGA IRQ controllers can be synthesized in an ARM reference board
-such as the Integrator or Versatile family. The output of these different
-controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
-instance can handle up to 32 interrupts.
-
-Required properties:
-- compatible: "arm,versatile-fpga-irq" or "oxsemi,ox810se-rps-irq"
-- interrupt-controller: Identifies the node as an interrupt controller
-- #interrupt-cells: The number of cells to define the interrupts.  Must be 1
-  as the FPGA IRQ controller has no configuration options for interrupt
-  sources.  The cell is a u32 and defines the interrupt number.
-- reg: The register bank for the FPGA interrupt controller.
-- clear-mask: a u32 number representing the mask written to clear all IRQs
-  on the controller at boot for example.
-- valid-mask: a u32 number representing a bit mask determining which of
-  the interrupts are valid. Unconnected/unused lines are set to 0, and
-  the system till not make it possible for devices to request these
-  interrupts.
-
-Example:
-
-pic: pic@14000000 {
-        compatible = "arm,versatile-fpga-irq";
-        #interrupt-cells = <1>;
-        interrupt-controller;
-        reg = <0x14000000 0x100>;
-        clear-mask = <0xffffffff>;
-        valid-mask = <0x003fffff>;
-};
-
-Optional properties:
-- interrupts: if the FPGA IRQ controller is cascaded, i.e. if its IRQ
-  output is simply connected to the input of another IRQ controller,
-  then the parent IRQ shall be specified in this property.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml
new file mode 100644
index 000000000000..8d581b3aac3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/arm,versatile-fpga-irq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile FPGA IRQ Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  One or more FPGA IRQ controllers can be synthesized in an ARM reference board
+  such as the Integrator or Versatile family. The output of these different
+  controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
+  instance can handle up to 32 interrupts.
+
+properties:
+  compatible:
+    const: arm,versatile-fpga-irq
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clear-mask:
+    description: A mask written to clear all IRQs on the controller at boot.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  valid-mask:
+    description:
+      A bit mask determining which interrupts are valid; unused lines are set to 0.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  interrupts:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+  - reg
+  - clear-mask
+  - valid-mask
+
+examples:
+  - |
+    interrupt-controller@14000000 {
+        compatible = "arm,versatile-fpga-irq";
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        reg = <0x14000000 0x100>;
+        clear-mask = <0xffffffff>;
+        valid-mask = <0x003fffff>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
deleted file mode 100644
index 033cc82e5684..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Device tree configuration for the I2C Interrupt Controller on the AST24XX and
-AST25XX SoCs.
-
-Required Properties:
-- #address-cells	: should be 1
-- #size-cells 		: should be 1
-- #interrupt-cells 	: should be 1
-- compatible 		: should be "aspeed,ast2400-i2c-ic"
-			  or "aspeed,ast2500-i2c-ic"
-- reg			: address start and range of controller
-- interrupts		: interrupt number
-- interrupt-controller	: denotes that the controller receives and fires
-			  new interrupts for child busses
-
-Example:
-
-i2c_ic: interrupt-controller@0 {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	#interrupt-cells = <1>;
-	compatible = "aspeed,ast2400-i2c-ic";
-	reg = <0x0 0x40>;
-	interrupts = <12>;
-	interrupt-controller;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.yaml
new file mode 100644
index 000000000000..6cff6a7231bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2400-i2c-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed I2C Interrupt Controller (AST24XX/AST25XX)
+
+maintainers:
+  - Ryan Chen <ryan_chen@aspeedtech.com>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-i2c-ic
+      - aspeed,ast2500-i2c-ic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@0 {
+        compatible = "aspeed,ast2400-i2c-ic";
+        reg = <0x0 0x40>;
+        #interrupt-cells = <1>;
+        interrupts = <12>;
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
deleted file mode 100644
index e3fea0758d25..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Aspeed Vectored Interrupt Controller
-
-These bindings are for the Aspeed interrupt controller. The AST2400 and
-AST2500 SoC families include a legacy register layout before a re-designed
-layout, but the bindings do not prescribe the use of one or the other.
-
-Required properties:
-
-- compatible : "aspeed,ast2400-vic"
-               "aspeed,ast2500-vic"
-
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-
-Example:
-
- vic: interrupt-controller@1e6c0080 {
-      compatible = "aspeed,ast2400-vic";
-      interrupt-controller;
-      #interrupt-cells = <1>;
-      reg = <0x1e6c0080 0x80>;
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.yaml
new file mode 100644
index 000000000000..86516cd44b9d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-vic.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2400-vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed Vectored Interrupt Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+description:
+  The AST2400 and AST2500 SoC families include a legacy register layout before
+  a redesigned layout, but the bindings do not prescribe the use of one or the
+  other.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-vic
+      - aspeed,ast2500-vic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+    description:
+      Specifies the number of cells needed to encode an interrupt source. It
+      must be 1 as the VIC has no configuration options for interrupt sources.
+      The single cell defines the interrupt number.
+
+  valid-sources:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    description:
+      A bitmap of supported sources for the implementation.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@1e6c0080 {
+        compatible = "aspeed,ast2400-vic";
+        reg = <0x1e6c0080 0x80>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        valid-sources = <0xffffffff 0x0007ffff>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2500-scu-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2500-scu-ic.yaml
new file mode 100644
index 000000000000..d998a9d69b91
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2500-scu-ic.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Eddie James
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2500-scu-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed AST25XX, AST26XX, AST27XX SCU Interrupt Controller
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2500-scu-ic
+      - aspeed,ast2600-scu-ic0
+      - aspeed,ast2600-scu-ic1
+      - aspeed,ast2700-scu-ic0
+      - aspeed,ast2700-scu-ic1
+      - aspeed,ast2700-scu-ic2
+      - aspeed,ast2700-scu-ic3
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@18 {
+        compatible = "aspeed,ast2500-scu-ic";
+        reg = <0x18 0x4>;
+        #interrupt-cells = <1>;
+        interrupts = <21>;
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
new file mode 100644
index 000000000000..258d21fe6e35
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2700-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed AST2700 Interrupt Controller
+
+description:
+  This interrupt controller hardware is second level interrupt controller that
+  is hooked to a parent interrupt controller. It's useful to combine multiple
+  interrupt sources into 1 interrupt to parent interrupt controller.
+
+maintainers:
+  - Kevin Chen <kevin_chen@aspeedtech.com>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2700-intc-ic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+    description:
+      The first cell is the IRQ number, the second cell is the trigger
+      type as defined in interrupt.txt in this directory.
+
+  interrupts:
+    minItems: 1
+    maxItems: 10
+    description: |
+      Depend to which INTC0 or INTC1 used.
+      INTC0 and INTC1 are two kinds of interrupt controller with enable and raw
+      status registers for use.
+      INTC0 is used to assert GIC if interrupt in INTC1 asserted.
+      INTC1 is used to assert INTC0 if interrupt of modules asserted.
+      +-----+   +-------+     +---------+---module0
+      | GIC |---| INTC0 |--+--| INTC1_0 |---module2
+      |     |   |       |  |  |         |---...
+      +-----+   +-------+  |  +---------+---module31
+                           |
+                           |   +---------+---module0
+                           +---| INTC1_1 |---module2
+                           |   |         |---...
+                           |   +---------+---module31
+                          ...
+                           |   +---------+---module0
+                           +---| INTC1_5 |---module2
+                               |         |---...
+                               +---------+---module31
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        interrupt-controller@12101b00 {
+            compatible = "aspeed,ast2700-intc-ic";
+            reg = <0 0x12101b00 0 0x10>;
+            #interrupt-cells = <1>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
deleted file mode 100644
index 251ed44171db..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Aspeed AST25XX and AST26XX SCU Interrupt Controller
-
-Required Properties:
- - #interrupt-cells		: must be 1
- - compatible			: must be "aspeed,ast2500-scu-ic",
-				  "aspeed,ast2600-scu-ic0" or
-				  "aspeed,ast2600-scu-ic1"
- - interrupts			: interrupt from the parent controller
- - interrupt-controller		: indicates that the controller receives and
-				  fires new interrupts for child busses
-
-Example:
-
-    syscon@1e6e2000 {
-        ranges = <0 0x1e6e2000 0x1a8>;
-
-        scu_ic: interrupt-controller@18 {
-            #interrupt-cells = <1>;
-            compatible = "aspeed,ast2500-scu-ic";
-            interrupts = <21>;
-            interrupt-controller;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
deleted file mode 100644
index 7079d44bf3ba..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Advanced Interrupt Controller (AIC)
-
-Required properties:
-- compatible: Should be:
-    - "atmel,<chip>-aic" where  <chip> can be "at91rm9200", "sama5d2",
-      "sama5d3" or "sama5d4"
-    - "microchip,<chip>-aic" where <chip> can be "sam9x60"
-
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
-  The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-      Valid combinations are 1, 2, 3, 4, 8.
-      Default flag for internal sources should be set to 4 (active high).
-  The third cell is used to specify the irq priority from 0 (lowest) to 7
-  (highest).
-- reg: Should contain AIC registers location and length
-- atmel,external-irqs: u32 array of external irqs.
-
-Examples:
-	/*
-	 * AIC
-	 */
-	aic: interrupt-controller@fffff000 {
-		compatible = "atmel,at91rm9200-aic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0xfffff000 0x200>;
-	};
-
-	/*
-	 * An interrupt generating device that is wired to an AIC.
-	 */
-	dma: dma-controller@ffffec00 {
-		compatible = "atmel,at91sam9g45-dma";
-		reg = <0xffffec00 0x200>;
-		interrupts = <21 4 5>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.yaml
new file mode 100644
index 000000000000..d671ed884c9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/atmel,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advanced Interrupt Controller (AIC)
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Dharma balasubiramani <dharma.b@microchip.com>
+
+description:
+  The Advanced Interrupt Controller (AIC) is an 8-level priority, individually
+  maskable, vectored interrupt controller providing handling of up to one
+  hundred and twenty-eight interrupt sources.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91rm9200-aic
+      - atmel,sama5d2-aic
+      - atmel,sama5d3-aic
+      - atmel,sama5d4-aic
+      - microchip,sam9x60-aic
+      - microchip,sam9x7-aic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 3
+    description: |
+      The 1st cell is the IRQ number (Peripheral IDentifier on datasheet).
+      The 2nd cell specifies flags:
+        bits[3:0] trigger type and level flags:
+          1 = low-to-high edge triggered.
+          2 = high-to-low edge triggered.
+          4 = active high level-sensitive.
+          8 = active low level-sensitive.
+        Valid combinations: 1, 2, 3, 4, 8.
+        Default for internal sources: 4 (active high).
+      The 3rd cell specifies irq priority from 0 (lowest) to 7 (highest).
+
+  interrupts:
+    maxItems: 1
+
+  atmel,external-irqs:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: u32 array of external irqs.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: atmel,at91rm9200-aic
+    then:
+      properties:
+        atmel,external-irqs:
+          minItems: 1
+          maxItems: 7
+    else:
+      properties:
+        atmel,external-irqs:
+          minItems: 1
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - atmel,external-irqs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@fffff000 {
+      compatible = "atmel,at91rm9200-aic";
+      reg = <0xfffff000 0x200>;
+      interrupt-controller;
+      #interrupt-cells = <3>;
+      atmel,external-irqs = <31>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2712-msix.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2712-msix.yaml
new file mode 100644
index 000000000000..c84614663b5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2712-msix.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm2712-msix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom bcm2712 MSI-X Interrupt Peripheral support
+
+maintainers:
+  - Stanimir Varbanov <svarbanov@suse.de>
+
+description:
+  This interrupt controller is used to provide interrupt vectors to the
+  generic interrupt controller (GIC) on bcm2712. It will be used as
+  external MSI-X controller for PCIe root complex.
+
+allOf:
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2712-mip
+
+  reg:
+    items:
+      - description: Base register address
+      - description: PCIe message address
+
+  "#msi-cells":
+    const: 0
+
+  brcm,msi-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Shift the allocated MSI's.
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - msi-controller
+  - msi-ranges
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    axi {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        msi-controller@1000130000 {
+            compatible = "brcm,bcm2712-mip";
+            reg = <0x10 0x00130000 0x00 0xc0>,
+                  <0xff 0xfffff000 0x00 0x1000>;
+            msi-controller;
+            #msi-cells = <0>;
+            msi-ranges = <&gicv2 GIC_SPI 128 IRQ_TYPE_EDGE_RISING 64>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
deleted file mode 100644
index 0f1af5a1c12e..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-BCM2835 Top-Level ("ARMCTRL") Interrupt Controller
-
-The BCM2835 contains a custom top-level interrupt controller, which supports
-72 interrupt sources using a 2-level register scheme. The interrupt
-controller, or the HW block containing it, is referred to occasionally
-as "armctrl" in the SoC documentation, hence naming of this binding.
-
-The BCM2836 contains the same interrupt controller with the same
-interrupts, but the per-CPU interrupt controller is the root, and an
-interrupt there indicates that the ARMCTRL has an interrupt to handle.
-
-Required properties:
-
-- compatible : should be "brcm,bcm2835-armctrl-ic" or
-                 "brcm,bcm2836-armctrl-ic"
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-
-  The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
-  pending" register, or 1/2 respectively for interrupts in the "IRQ pending
-  1/2" register.
-
-  The 2nd cell contains the interrupt number within the bank. Valid values
-  are 0..7 for bank 0, and 0..31 for bank 1.
-
-Additional required properties for brcm,bcm2836-armctrl-ic:
-- interrupts : Specifies the interrupt on the parent for this interrupt
-  controller to handle.
-
-The interrupt sources are as follows:
-
-Bank 0:
-0: ARM_TIMER
-1: ARM_MAILBOX
-2: ARM_DOORBELL_0
-3: ARM_DOORBELL_1
-4: VPU0_HALTED
-5: VPU1_HALTED
-6: ILLEGAL_TYPE0
-7: ILLEGAL_TYPE1
-
-Bank 1:
-0: TIMER0
-1: TIMER1
-2: TIMER2
-3: TIMER3
-4: CODEC0
-5: CODEC1
-6: CODEC2
-7: VC_JPEG
-8: ISP
-9: VC_USB
-10: VC_3D
-11: TRANSPOSER
-12: MULTICORESYNC0
-13: MULTICORESYNC1
-14: MULTICORESYNC2
-15: MULTICORESYNC3
-16: DMA0
-17: DMA1
-18: VC_DMA2
-19: VC_DMA3
-20: DMA4
-21: DMA5
-22: DMA6
-23: DMA7
-24: DMA8
-25: DMA9
-26: DMA10
-27: DMA11-14 - shared interrupt for DMA 11 to 14
-28: DMAALL - triggers on all dma interrupts (including chanel 15)
-29: AUX
-30: ARM
-31: VPUDMA
-
-Bank 2:
-0: HOSTPORT
-1: VIDEOSCALER
-2: CCP2TX
-3: SDC
-4: DSI0
-5: AVE
-6: CAM0
-7: CAM1
-8: HDMI0
-9: HDMI1
-10: PIXELVALVE1
-11: I2CSPISLV
-12: DSI1
-13: PWA0
-14: PWA1
-15: CPR
-16: SMI
-17: GPIO0
-18: GPIO1
-19: GPIO2
-20: GPIO3
-21: VC_I2C
-22: VC_SPI
-23: VC_I2SPCM
-24: VC_SDIO
-25: VC_UART
-26: SLIMBUS
-27: VEC
-28: CPG
-29: RNG
-30: VC_ARASANSDIO
-31: AVSPMON
-
-Example:
-
-/* BCM2835, first level */
-intc: interrupt-controller {
-	compatible = "brcm,bcm2835-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-/* BCM2836, second level */
-intc: interrupt-controller {
-	compatible = "brcm,bcm2836-armctrl-ic";
-	reg = <0x7e00b200 0x200>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	interrupt-parent = <&local_intc>;
-	interrupts = <8>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.yaml
new file mode 100644
index 000000000000..625eb22bedf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.yaml
@@ -0,0 +1,162 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm2835-armctrl-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2835 ARMCTRL Interrupt Controller
+
+maintainers:
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description: >
+  The BCM2835 contains a custom top-level interrupt controller, which supports
+  72 interrupt sources using a 2-level register scheme. The interrupt
+  controller, or the HW block containing it, is referred to occasionally as
+  "armctrl" in the SoC documentation, hence naming of this binding.
+
+  The BCM2836 contains the same interrupt controller with the same interrupts,
+  but the per-CPU interrupt controller is the root, and an interrupt there
+  indicates that the ARMCTRL has an interrupt to handle.
+
+  The interrupt sources are as follows:
+
+  Bank 0:
+    0: ARM_TIMER
+    1: ARM_MAILBOX
+    2: ARM_DOORBELL_0
+    3: ARM_DOORBELL_1
+    4: VPU0_HALTED
+    5: VPU1_HALTED
+    6: ILLEGAL_TYPE0
+    7: ILLEGAL_TYPE1
+
+  Bank 1:
+    0: TIMER0
+    1: TIMER1
+    2: TIMER2
+    3: TIMER3
+    4: CODEC0
+    5: CODEC1
+    6: CODEC2
+    7: VC_JPEG
+    8: ISP
+    9: VC_USB
+    10: VC_3D
+    11: TRANSPOSER
+    12: MULTICORESYNC0
+    13: MULTICORESYNC1
+    14: MULTICORESYNC2
+    15: MULTICORESYNC3
+    16: DMA0
+    17: DMA1
+    18: VC_DMA2
+    19: VC_DMA3
+    20: DMA4
+    21: DMA5
+    22: DMA6
+    23: DMA7
+    24: DMA8
+    25: DMA9
+    26: DMA10
+    27: DMA11-14 - shared interrupt for DMA 11 to 14
+    28: DMAALL - triggers on all dma interrupts (including channel 15)
+    29: AUX
+    30: ARM
+    31: VPUDMA
+
+  Bank 2:
+    0: HOSTPORT
+    1: VIDEOSCALER
+    2: CCP2TX
+    3: SDC
+    4: DSI0
+    5: AVE
+    6: CAM0
+    7: CAM1
+    8: HDMI0
+    9: HDMI1
+    10: PIXELVALVE1
+    11: I2CSPISLV
+    12: DSI1
+    13: PWA0
+    14: PWA1
+    15: CPR
+    16: SMI
+    17: GPIO0
+    18: GPIO1
+    19: GPIO2
+    20: GPIO3
+    21: VC_I2C
+    22: VC_SPI
+    23: VC_I2SPCM
+    24: VC_SDIO
+    25: VC_UART
+    26: SLIMBUS
+    27: VEC
+    28: CPG
+    29: RNG
+    30: VC_ARASANSDIO
+    31: AVSPMON
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm2835-armctrl-ic
+      - brcm,bcm2836-armctrl-ic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: >
+      The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic
+      pending" register, or 1/2 respectively for interrupts in the "IRQ pending
+      1/2" register.
+
+      The 2nd cell contains the interrupt number within the bank. Valid values
+      are 0..7 for bank 0, and 0..31 for bank 1.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm2836-armctrl-ic
+    then:
+      required:
+        - interrupts
+    else:
+      properties:
+        interrupts: false
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@7e00b200 {
+        compatible = "brcm,bcm2835-armctrl-ic";
+        reg = <0x7e00b200 0x200>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+  - |
+    interrupt-controller@7e00b200 {
+        compatible = "brcm,bcm2836-armctrl-ic";
+        reg = <0x7e00b200 0x200>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
deleted file mode 100644
index 8ced1696c325..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-BCM2836 per-CPU interrupt controller
-
-The BCM2836 has a per-cpu interrupt controller for the timer, PMU
-events, and SMP IPIs.  One of the CPUs may receive interrupts for the
-peripheral (GPU) events, which chain to the BCM2835-style interrupt
-controller.
-
-Required properties:
-
-- compatible:	 	Should be "brcm,bcm2836-l1-intc"
-- reg:			Specifies base physical address and size of the
-			  registers
-- interrupt-controller:	Identifies the node as an interrupt controller
-- #interrupt-cells:	Specifies the number of cells needed to encode an
-			  interrupt source. The value shall be 2
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-The interrupt sources are as follows:
-
-0: CNTPSIRQ
-1: CNTPNSIRQ
-2: CNTHPIRQ
-3: CNTVIRQ
-8: GPU_FAST
-9: PMU_FAST
-
-Example:
-
-local_intc: local_intc {
-	compatible = "brcm,bcm2836-l1-intc";
-	reg = <0x40000000 0x100>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	interrupt-parent = <&local_intc>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml
new file mode 100644
index 000000000000..2ff390c1705b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm2836-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM2836 per-CPU interrupt controller
+
+maintainers:
+  - Stefan Wahren <wahrenst@gmx.net>
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description:
+  The BCM2836 has a per-cpu interrupt controller for the timer, PMU
+  events, and SMP IPIs. One of the CPUs may receive interrupts for the
+  peripheral (GPU) events, which chain to the BCM2835-style interrupt
+  controller.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm2836-l1-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    local_intc: interrupt-controller@40000000 {
+        compatible = "brcm,bcm2836-l1-intc";
+        reg = <0x40000000 0x100>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&local_intc>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
deleted file mode 100644
index 37aea40d5430..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom BCM3380-style Level 1 / Level 2 interrupt controller
-
-This interrupt controller shows up in various forms on many BCM338x/BCM63xx
-chipsets.  It has the following properties:
-
-- outputs a single interrupt signal to its interrupt controller parent
-
-- contains one or more enable/status word pairs, which often appear at
-  different offsets in different blocks
-
-- no atomic set/clear operations
-
-Required properties:
-
-- compatible: should be "brcm,bcm3380-l2-intc"
-- reg: specifies one or more enable/status pairs, in the following format:
-  <enable_reg 0x4 status_reg 0x4>...
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-irq0_intc: interrupt-controller@10000020 {
-	compatible = "brcm,bcm3380-l2-intc";
-	reg = <0x10000024 0x4 0x1000002c 0x4>,
-	      <0x10000020 0x4 0x10000028 0x4>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	interrupt-parent = <&cpu_intc>;
-	interrupts = <2>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
deleted file mode 100644
index 2bc19b1ac877..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Broadcom BCM6345-style Level 1 interrupt controller
-
-This block is a first level interrupt controller that is typically connected
-directly to one of the HW INT lines on each CPU.
-
-Key elements of the hardware design include:
-
-- 32, 64 or 128 incoming level IRQ lines
-
-- Most onchip peripherals are wired directly to an L1 input
-
-- A separate instance of the register set for each CPU, allowing individual
-  peripheral IRQs to be routed to any CPU
-
-- Contains one or more enable/status word pairs per CPU
-
-- No atomic set/clear operations
-
-- No polarity/level/edge settings
-
-- No FIFO or priority encoder logic; software is expected to read all
-  2-4 status words to determine which IRQs are pending
-
-Required properties:
-
-- compatible: should be "brcm,bcm<soc>-l1-intc", "brcm,bcm6345-l1-intc"
-- reg: specifies the base physical address and size of the registers;
-  the number of supported IRQs is inferred from the size argument
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node; valid values depend on the type of parent interrupt controller
-
-If multiple reg ranges and interrupt-parent entries are present on an SMP
-system, the driver will allow IRQ SMP affinity to be set up through the
-/proc/irq/ interface.  In the simplest possible configuration, only one
-reg range and one interrupt-parent is needed.
-
-The driver operates in native CPU endian by default, there is no support for
-specifying an alternative endianness.
-
-Example:
-
-periph_intc: interrupt-controller@10000000 {
-        compatible = "brcm,bcm63168-l1-intc", "brcm,bcm6345-l1-intc";
-        reg = <0x10000020 0x20>,
-              <0x10000040 0x20>;
-
-        interrupt-controller;
-        #interrupt-cells = <1>;
-
-        interrupt-parent = <&cpu_intc>;
-        interrupts = <2>, <3>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.yaml
new file mode 100644
index 000000000000..ca6a2ff43acd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm6345-l1-intc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm6345-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6345-style Level 1 interrupt controller
+
+maintainers:
+  - Simon Arlott <simon@octiron.net>
+
+description: >
+  This block is a first level interrupt controller that is typically connected
+  directly to one of the HW INT lines on each CPU.
+
+  Key elements of the hardware design include:
+
+    - 32, 64 or 128 incoming level IRQ lines
+
+    - Most onchip peripherals are wired directly to an L1 input
+
+    - A separate instance of the register set for each CPU, allowing individual
+      peripheral IRQs to be routed to any CPU
+
+    - Contains one or more enable/status word pairs per CPU
+
+    - No atomic set/clear operations
+
+    - No polarity/level/edge settings
+
+    - No FIFO or priority encoder logic; software is expected to read all
+      2-4 status words to determine which IRQs are pending
+
+  If multiple reg ranges and interrupt-parent entries are present on an SMP
+  system, the driver will allow IRQ SMP affinity to be set up through the
+  /proc/irq/ interface.  In the simplest possible configuration, only one
+  reg range and one interrupt-parent is needed.
+
+  The driver operates in native CPU endian by default, there is no support for
+  specifying an alternative endianness.
+
+properties:
+  compatible:
+    const: brcm,bcm6345-l1-intc
+
+  reg:
+    description: One entry per CPU core
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    description: One entry per CPU core
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@10000000 {
+        compatible = "brcm,bcm6345-l1-intc";
+        reg = <0x10000020 0x20>,
+              <0x10000040 0x20>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interrupts = <2>, <3>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
deleted file mode 100644
index 5ddef1dc0c1a..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Broadcom BCM7038-style Level 1 interrupt controller
-
-This block is a first level interrupt controller that is typically connected
-directly to one of the HW INT lines on each CPU.  Every BCM7xxx set-top chip
-since BCM7038 has contained this hardware.
-
-Key elements of the hardware design include:
-
-- 64, 96, 128, or 160 incoming level IRQ lines
-
-- Most onchip peripherals are wired directly to an L1 input
-
-- A separate instance of the register set for each CPU, allowing individual
-  peripheral IRQs to be routed to any CPU
-
-- Atomic mask/unmask operations
-
-- No polarity/level/edge settings
-
-- No FIFO or priority encoder logic; software is expected to read all
-  2-5 status words to determine which IRQs are pending
-
-Required properties:
-
-- compatible: should be "brcm,bcm7038-l1-intc"
-- reg: specifies the base physical address and size of the registers;
-  the number of supported IRQs is inferred from the size argument
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node; valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: If present, this means the L1 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Optional properties:
-
-- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts
-  have already been configured by the firmware and should be left unmanaged.
-  This should have one 32-bit word per status/set/clear/mask group.
-
-If multiple reg ranges and interrupt-parent entries are present on an SMP
-system, the driver will allow IRQ SMP affinity to be set up through the
-/proc/irq/ interface.  In the simplest possible configuration, only one
-reg range and one interrupt-parent is needed.
-
-Example:
-
-periph_intc: periph_intc@1041a400 {
-        compatible = "brcm,bcm7038-l1-intc";
-        reg = <0x1041a400 0x30 0x1041a600 0x30>;
-
-        interrupt-controller;
-        #interrupt-cells = <1>;
-
-        interrupt-parent = <&cpu_intc>;
-        interrupts = <2>, <3>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
new file mode 100644
index 000000000000..5ecb6faa70dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038-style Level 1 interrupt controller
+
+description: >
+  This block is a first level interrupt controller that is typically connected
+  directly to one of the HW INT lines on each CPU.  Every BCM7xxx set-top chip
+  since BCM7038 has contained this hardware.
+
+  Key elements of the hardware design include:
+
+   - 64, 96, 128, or 160 incoming level IRQ lines
+
+   - Most onchip peripherals are wired directly to an L1 input
+
+   - A separate instance of the register set for each CPU, allowing individual
+     peripheral IRQs to be routed to any CPU
+
+   - Atomic mask/unmask operations
+
+   - No polarity/level/edge settings
+
+   - No FIFO or priority encoder logic; software is expected to read all
+     2-5 status words to determine which IRQs are pending
+
+   If multiple reg ranges and interrupt-parent entries are present on an SMP
+   system, the driver will allow IRQ SMP affinity to be set up through the
+   /proc/irq/ interface.  In the simplest possible configuration, only one
+   reg range and one interrupt-parent is needed.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm7038-l1-intc
+
+  reg:
+    description: >
+      Specifies the base physical address and size of the registers
+      the number of supported IRQs is inferred from the size argument
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    description: >
+     Specifies the interrupt line(s) in the interrupt-parent controller node;
+     valid values depend on the type of parent interrupt controller
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L1 controller can be used as a
+      wakeup source for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      If present, a bit mask to indicate which interrupts have already been
+      configured by the firmware and should be left unmanaged. This should
+      have one 32-bit word per status/set/clear/mask group.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    periph_intc: interrupt-controller@1041a400 {
+      compatible = "brcm,bcm7038-l1-intc";
+      reg = <0x1041a400 0x30>, <0x1041a600 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&cpu_intc>;
+      interrupts = <2>, <3>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
deleted file mode 100644
index addd86b6ca2f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-Broadcom BCM7120-style Level 2 interrupt controller
-
-This interrupt controller hardware is a second level interrupt controller that
-is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
-platforms. It can be found on BCM7xxx products starting with BCM7120.
-
-Such an interrupt controller has the following hardware design:
-
-- outputs multiple interrupts signals towards its interrupt controller parent
-
-- controls how some of the interrupts will be flowing, whether they will
-  directly output an interrupt signal towards the interrupt controller parent,
-  or if they will output an interrupt signal at this 2nd level interrupt
-  controller, in particular for UARTs
-
-- has one 32-bit enable word and one 32-bit status word
-
-- no atomic set/clear operations
-
-- not all bits within the interrupt controller actually map to an interrupt
-
-The typical hardware layout for this controller is represented below:
-
-2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
-
-0 -----[ MUX ] ------------|==========> GIC interrupt 75
-          \-----------\
-                       |
-1 -----[ MUX ] --------)---|==========> GIC interrupt 76
-          \------------|
-                       |
-2 -----[ MUX ] --------)---|==========> GIC interrupt 77
-          \------------|
-                       |
-3 ---------------------|
-4 ---------------------|
-5 ---------------------|
-7 ---------------------|---|===========> GIC interrupt 66
-9 ---------------------|
-10 --------------------|
-11 --------------------/
-
-6 ------------------------\
-                           |===========> GIC interrupt 64
-8 ------------------------/
-
-12 ........................ X
-13 ........................ X 		(not connected)
-..
-31 ........................ X
-
-Required properties:
-
-- compatible: should be "brcm,bcm7120-l2-intc"
-- reg: specifies the base physical address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
-  are wired to this 2nd level interrupt controller, and how they match their
-  respective interrupt parents. Should match exactly the number of interrupts
-  specified in the 'interrupts' property.
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which
-  have a mux gate, typically UARTs. Setting these bits will make their
-  respective interrupt outputs bypass this 2nd level interrupt controller
-  completely; it is completely transparent for the interrupt controller
-  parent. This should have one 32-bit word per enable/status pair.
-
-Example:
-
-irq0_intc: interrupt-controller@f0406800 {
-	compatible = "brcm,bcm7120-l2-intc";
-	interrupt-parent = <&intc>;
-	#interrupt-cells = <1>;
-	reg = <0xf0406800 0x8>;
-	interrupt-controller;
-	interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
-	brcm,int-map-mask = <0xeb8>, <0x140>;
-	brcm,int-fwd-mask = <0x7>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
new file mode 100644
index 000000000000..0fcbe304cd05
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: >
+  This interrupt controller hardware is a second level interrupt controller that
+  is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+  platforms. It can be found on BCM7xxx products starting with BCM7120.
+
+  Such an interrupt controller has the following hardware design:
+
+  - outputs multiple interrupts signals towards its interrupt controller parent
+
+  - controls how some of the interrupts will be flowing, whether they will
+    directly output an interrupt signal towards the interrupt controller parent,
+    or if they will output an interrupt signal at this 2nd level interrupt
+    controller, in particular for UARTs
+
+  - has one 32-bit enable word and one 32-bit status word
+
+  - no atomic set/clear operations
+
+  - not all bits within the interrupt controller actually map to an interrupt
+
+  The typical hardware layout for this controller is represented below:
+
+  2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
+
+  0 -----[ MUX ] ------------|==========> GIC interrupt 75
+            \-----------\
+                         |
+  1 -----[ MUX ] --------)---|==========> GIC interrupt 76
+            \------------|
+                         |
+  2 -----[ MUX ] --------)---|==========> GIC interrupt 77
+            \------------|
+                         |
+  3 ---------------------|
+  4 ---------------------|
+  5 ---------------------|
+  7 ---------------------|---|===========> GIC interrupt 66
+  9 ---------------------|
+  10 --------------------|
+  11 --------------------/
+
+  6 ------------------------\
+                            |===========> GIC interrupt 64
+  8 ------------------------/
+
+  12 ........................ X
+  13 ........................ X           (not connected)
+  ..
+  31 ........................ X
+
+  The BCM3380 Level 1 / Level 2 interrupt controller shows up in various forms
+  on many BCM338x/BCM63xx chipsets. It has the following properties:
+
+  - outputs a single interrupt signal to its interrupt controller parent
+
+  - contains one or more enable/status word pairs, which often appear at
+    different offsets in different blocks
+
+  - no atomic set/clear operations
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7120-l2-intc
+          - brcm,bcm3380-l2-intc
+
+  reg:
+    minItems: 1
+    maxItems: 4
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+
+  brcm,int-map-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      32-bits bit mask describing how many and which interrupts are wired to
+      this 2nd level interrupt controller, and how they match their respective
+      interrupt parents. Should match exactly the number of interrupts
+      specified in the 'interrupts' property.
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 1
+    description: >
+      if present, a bit mask to configure the interrupts which have a mux gate,
+      typically UARTs. Setting these bits will make their respective interrupt
+      outputs bypass this 2nd level interrupt controller completely; it is
+      completely transparent for the interrupt controller parent. This should
+      have one 32-bit word per enable/status pair.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    irq0_intc: interrupt-controller@f0406800 {
+        compatible = "brcm,bcm7120-l2-intc";
+        interrupt-parent = <&intc>;
+        #interrupt-cells = <1>;
+        reg = <0xf0406800 0x8>;
+        interrupt-controller;
+        interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
+        brcm,int-map-mask = <0xeb8>, <0x140>;
+        brcm,int-fwd-mask = <0x7>;
+    };
+
+  - |
+    irq1_intc: interrupt-controller@10000020 {
+        compatible = "brcm,bcm3380-l2-intc";
+        reg = <0x10000024 0x4>, <0x1000002c 0x4>,
+              <0x10000020 0x4>, <0x10000028 0x4>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupt-parent = <&cpu_intc>;
+        interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
deleted file mode 100644
index 021cf822395c..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Broadcom Generic Level 2 Interrupt Controller
-
-Required properties:
-
-- compatible: should be one of:
-	      "brcm,hif-spi-l2-intc" or
-	      "brcm,upg-aux-aon-l2-intc" or
-	      "brcm,l2-intc" for latched interrupt controllers
-              should be "brcm,bcm7271-l2-intc" for level interrupt controllers
-- reg: specifies the base physical address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an
-  interrupt source. Should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent irq space
-  to be used for cascading
-
-Optional properties:
-
-- brcm,irq-can-wake: If present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-hif_intr2_intc: interrupt-controller@f0441000 {
-	compatible = "brcm,l2-intc";
-	reg = <0xf0441000 0x30>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	interrupt-parent = <&intc>;
-	interrupts = <0x0 0x20 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
new file mode 100644
index 000000000000..8961afca96f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Generic Level 2 Interrupt Controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,hif-spi-l2-intc
+              - brcm,upg-aux-aon-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - enum:
+              - brcm,bcm2711-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - const: brcm,bcm7271-l2-intc
+      - items:
+          - const: brcm,l2-intc
+
+  reg:
+    maxItems: 1
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    hif_intr2_intc: interrupt-controller@f0441000 {
+      compatible = "brcm,l2-intc";
+      reg = <0xf0441000 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&intc>;
+      interrupts = <0x0 0x20 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt
deleted file mode 100644
index d4de980e55fa..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-mx.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Xtensa Interrupt Distributor and Programmable Interrupt Controller (MX)
-
-Required properties:
-- compatible: Should be "cdns,xtensa-mx".
-
-Remaining properties have exact same meaning as in Xtensa PIC
-(see cdns,xtensa-pic.txt).
-
-Examples:
-	pic: pic {
-		compatible = "cdns,xtensa-mx";
-		/* one cell: internal irq number,
-		 * two cells: second cell == 0: internal irq number
-		 *            second cell == 1: external irq number
-		 */
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt
deleted file mode 100644
index 026ef4cfc1d5..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Xtensa built-in Programmable Interrupt Controller (PIC)
-
-Required properties:
-- compatible: Should be "cdns,xtensa-pic".
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: The number of cells to define the interrupts.
-  It may be either 1 or 2.
-  When it's 1, the first cell is the internal IRQ number.
-  When it's 2, the first cell is the IRQ number, and the second cell
-  specifies whether it's internal (0) or external (1).
-  Periferals are usually connected to a fixed external IRQ, but for different
-  core variants it may be mapped to different internal IRQ.
-  IRQ sensitivity and priority are fixed for each core variant and may not be
-  changed at runtime.
-
-Examples:
-	pic: pic {
-		compatible = "cdns,xtensa-pic";
-		/* one cell: internal irq number,
-		 * two cells: second cell == 0: internal irq number
-		 *            second cell == 1: external irq number
-		 */
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.yaml
new file mode 100644
index 000000000000..6773207fee01
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/cdns,xtensa-pic.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Max Filippov <jcmvbkbc@gmail.com>
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/cdns,xtensa-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xtensa Interrupt Controllers
+
+maintainers:
+  - Max Filippov <jcmvbkbc@gmail.com>
+
+description:
+  Xtensa Interrupt Distributor and Programmable Interrupt Controller (MX) and
+  Xtensa built-in Programmable Interrupt Controller (PIC)
+
+properties:
+  compatible:
+    enum:
+      - cdns,xtensa-mx
+      - cdns,xtensa-pic
+
+  '#interrupt-cells':
+    enum: [ 1, 2 ]
+    description:
+      Number of cells to define the interrupts. When 1, the first cell is the
+      internal IRQ number; when 2, the second cell specifies internal (0) or
+      external (1).
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "cdns,xtensa-pic";
+        /* one cell: internal irq number,
+         * two cells: second cell == 0: internal irq number
+         *            second cell == 1: external irq number
+         */
+        #interrupt-cells = <2>;
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/chrp,open-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/chrp,open-pic.yaml
new file mode 100644
index 000000000000..642738512f3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/chrp,open-pic.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/chrp,open-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Open PIC Interrupt Controller
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description:
+  This binding specifies what properties must be available in the device tree
+  representation of an Open PIC compliant interrupt controller.  This binding is
+  based on the binding defined for Open PIC in [1] and is a superset of that
+  binding.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,mpic
+          - const: chrp,open-pic
+      - const: chrp,open-pic
+
+  device_type:
+    const: open-pci
+    deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#address-cells':
+    const: 0
+
+  '#interrupt-cells':
+    description:
+      A value of 4 means that interrupt specifiers contain the interrupt-type or
+      type-specific information cells.
+    enum: [ 2, 4 ]
+
+  pic-no-reset:
+    description: Indicates the PIC shall not be reset during runtime initialization.
+    type: boolean
+
+  single-cpu-affinity:
+    description:
+      If present, non-IPI interrupts will be routed to a single CPU at a time.
+    type: boolean
+
+  last-interrupt-source:
+    description:
+      Some MPICs do not correctly report the number of hardware sources in the
+      global feature registers. This value, if specified, overrides the value
+      read from MPIC_GREG_FEATURE_LAST_SRC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#address-cells'
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@40000 {
+        compatible = "chrp,open-pic";
+        reg = <0x40000 0x40000>;
+        interrupt-controller;
+        #address-cells = <0>;
+        #interrupt-cells = <2>;
+        pic-no-reset;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
deleted file mode 100644
index 969b4582ec60..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Cirrus Logic CLPS711X Interrupt Controller
-
-Required properties:
-
-- compatible: Should be "cirrus,ep7209-intc".
-- reg: Specifies base physical address of the registers set.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-
-The interrupt sources are as follows:
-ID	Name	Description
----------------------------
-1:	BLINT	Battery low (FIQ)
-3:	MCINT	Media changed (FIQ)
-4:	CSINT	CODEC sound
-5:	EINT1	External 1
-6:	EINT2	External 2
-7:	EINT3	External 3
-8:	TC1OI	TC1 under flow
-9:	TC2OI	TC2 under flow
-10:	RTCMI	RTC compare match
-11:	TINT	64Hz tick
-12:	UTXINT1	UART1 transmit FIFO half empty
-13:	URXINT1	UART1 receive FIFO half full
-14:	UMSINT	UART1 modem status changed
-15:	SSEOTI	SSI1 end of transfer
-16:	KBDINT	Keyboard
-17:	SS2RX	SSI2 receive FIFO half or greater full
-18:	SS2TX	SSI2 transmit FIFO less than half empty
-28:	UTXINT2	UART2 transmit FIFO half empty
-29:	URXINT2	UART2 receive FIFO half full
-32:	DAIINT	DAI interface (FIQ)
-
-Example:
-	intc: interrupt-controller {
-		compatible = "cirrus,ep7312-intc", "cirrus,ep7209-intc";
-		reg = <0x80000000 0x4000>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cirrus,ep7209-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/cirrus,ep7209-intc.yaml
new file mode 100644
index 000000000000..d3cc49d29e10
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/cirrus,ep7209-intc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/cirrus,ep7209-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CLPS711X Interrupt Controller
+
+maintainers:
+  - Alexander Shiyan <shc_work@mail.ru>
+
+description: >
+  Cirrus Logic CLPS711X Interrupt Controller
+
+  The interrupt sources are as follows:
+    ID	Name	Description
+    ---------------------------
+    1:	BLINT	Battery low (FIQ)
+    3:	MCINT	Media changed (FIQ)
+    4:	CSINT	CODEC sound
+    5:	EINT1	External 1
+    6:	EINT2	External 2
+    7:	EINT3	External 3
+    8:	TC1OI	TC1 under flow
+    9:	TC2OI	TC2 under flow
+    10:	RTCMI	RTC compare match
+    11:	TINT	64Hz tick
+    12:	UTXINT1	UART1 transmit FIFO half empty
+    13:	URXINT1	UART1 receive FIFO half full
+    14:	UMSINT	UART1 modem status changed
+    15:	SSEOTI	SSI1 end of transfer
+    16:	KBDINT	Keyboard
+    17:	SS2RX	SSI2 receive FIFO half or greater full
+    18:	SS2TX	SSI2 transmit FIFO less than half empty
+    28:	UTXINT2	UART2 transmit FIFO half empty
+    29:	URXINT2	UART2 receive FIFO half full
+    32:	DAIINT	DAI interface (FIQ)
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: cirrus,ep7312-intc
+          - const: cirrus,ep7209-intc
+      - items:
+          - const: cirrus,ep7209-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@80000000 {
+        compatible = "cirrus,ep7312-intc", "cirrus,ep7209-intc";
+        reg = <0x80000000 0x4000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cnxt,cx92755-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/cnxt,cx92755-ic.yaml
new file mode 100644
index 000000000000..3f016cf47812
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/cnxt,cx92755-ic.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/cnxt,cx92755-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Conexant Digicolor Interrupt Controller
+
+maintainers:
+  - Baruch Siach <baruch@tkos.co.il>
+
+description: Conexant Digicolor Interrupt Controller
+
+properties:
+  compatible:
+    const: cnxt,cx92755-ic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  syscon:
+    description: A phandle to the syscon node describing UC registers
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@f0000040 {
+        compatible = "cnxt,cx92755-ic";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        reg = <0xf0000040 0x40>;
+        syscon = <&uc_regs>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt
deleted file mode 100644
index 44286dcbac62..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-==============================
-C-SKY APB Interrupt Controller
-==============================
-
-C-SKY APB Interrupt Controller is a simple soc interrupt controller
-on the apb bus and we only use it as root irq controller.
-
- - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums.
- - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported.
- - csky,gx6605s-intc is gx6605s soc internal irq interrupt controller, 64 irq nums.
-
-=============================
-intc node bindings definition
-=============================
-
-	Description: Describes APB interrupt controller
-
-	PROPERTIES
-
-	- compatible
-		Usage: required
-		Value type: <string>
-		Definition: must be "csky,apb-intc"
-				    "csky,dual-apb-intc"
-				    "csky,gx6605s-intc"
-	- #interrupt-cells
-		Usage: required
-		Value type: <u32>
-		Definition: must be <1>
-	- reg
-		Usage: required
-		Value type: <u32 u32>
-		Definition: <phyaddr size> in soc from cpu view
-	- interrupt-controller:
-		Usage: required
-	- csky,support-pulse-signal:
-		Usage: select
-		Description: to support pulse signal flag
-
-Examples:
----------
-
-	intc: interrupt-controller@500000 {
-		compatible = "csky,apb-intc";
-		#interrupt-cells = <1>;
-		reg = <0x00500000 0x400>;
-		interrupt-controller;
-	};
-
-	intc: interrupt-controller@500000 {
-		compatible = "csky,dual-apb-intc";
-		#interrupt-cells = <1>;
-		reg = <0x00500000 0x400>;
-		interrupt-controller;
-	};
-
-	intc: interrupt-controller@500000 {
-		compatible = "csky,gx6605s-intc";
-		#interrupt-cells = <1>;
-		reg = <0x00500000 0x400>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.yaml
new file mode 100644
index 000000000000..902648ead975
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/csky,apb-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: C-SKY APB Interrupt Controller
+
+maintainers:
+  - Guo Ren <guoren@kernel.org>
+
+description: >
+  C-SKY APB Interrupt Controller is a simple soc interrupt controller on the apb
+  bus and we only use it as root irq controller.
+
+    - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums.
+    - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported.
+    - csky,gx6605s-intc is gx6605s soc internal irq interrupt controller, 64 irq nums.
+
+properties:
+  compatible:
+    enum:
+      - csky,apb-intc
+      - csky,dual-apb-intc
+      - csky,gx6605s-intc
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  csky,support-pulse-signal:
+    type: boolean
+    description: Support for pulse signal flag.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    intc: interrupt-controller@500000 {
+        compatible = "csky,apb-intc";
+        #interrupt-cells = <1>;
+        reg = <0x00500000 0x400>;
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
deleted file mode 100644
index e6bbcae4d07f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-===========================================
-C-SKY Multi-processors Interrupt Controller
-===========================================
-
-C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
-SMP soc, and it also could be used in non-SMP system.
-
-Interrupt number definition:
-  0-15  : software irq, and we use 15 as our IPI_IRQ.
- 16-31  : private  irq, and we use 16 as the co-processor timer.
- 31-1024: common irq for soc ip.
-
-Interrupt trigger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
- IRQ_TYPE_LEVEL_HIGH (default)
- IRQ_TYPE_LEVEL_LOW
- IRQ_TYPE_EDGE_RISING
- IRQ_TYPE_EDGE_FALLING
-
-=============================
-intc node bindings definition
-=============================
-
-	Description: Describes SMP interrupt controller
-
-	PROPERTIES
-
-	- compatible
-		Usage: required
-		Value type: <string>
-		Definition: must be "csky,mpintc"
-	- #interrupt-cells
-		Usage: required
-		Value type: <u32>
-		Definition: <2>
-	- interrupt-controller:
-		Usage: required
-
-Examples: ("interrupts = <irq_num IRQ_TYPE_XXX>")
----------
-#include <dt-bindings/interrupt-controller/irq.h>
-
-	intc: interrupt-controller {
-		compatible = "csky,mpintc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-	};
-
-	device: device-example {
-		...
-		interrupts = <34 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&intc>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.yaml b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.yaml
new file mode 100644
index 000000000000..3df7739e31c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/csky,mpintc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: C-SKY Multi-processors Interrupt Controller
+
+maintainers:
+  - Guo Ren <guoren@kernel.org>
+
+description: >
+  C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
+  SMP soc, and it also could be used in non-SMP system.
+
+  Interrupt number definition:
+    0-15  : software irq, and we use 15 as our IPI_IRQ.
+    16-31  : private  irq, and we use 16 as the co-processor timer.
+    31-1024: common irq for soc ip.
+
+properties:
+  compatible:
+    const: csky,mpintc
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "csky,mpintc";
+        #interrupt-cells = <2>;
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
deleted file mode 100644
index 42d41ec84c7b..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Conexant Digicolor Interrupt Controller
-
-Required properties:
-
-- compatible : should be "cnxt,cx92755-ic"
-- reg : Specifies base physical address and size of the interrupt controller
-  registers (IC) area
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-- syscon: A phandle to the syscon node describing UC registers
-
-Example:
-
-	intc: interrupt-controller@f0000040 {
-		compatible = "cnxt,cx92755-ic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0xf0000040 0x40>;
-		syscon = <&uc_regs>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml
new file mode 100644
index 000000000000..5536319c49c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/econet,en751221-intc.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/econet,en751221-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EcoNet EN751221 Interrupt Controller
+
+maintainers:
+  - Caleb James DeLisle <cjd@cjdns.fr>
+
+description:
+  The EcoNet EN751221 Interrupt Controller is a simple interrupt controller
+  designed for the MIPS 34Kc MT SMP processor with 2 VPEs. Each interrupt can
+  be routed to either VPE but not both, so to support per-CPU interrupts, a
+  secondary IRQ number is allocated to control masking/unmasking on VPE#1. For
+  lack of a better term we call these "shadow interrupts". The assignment of
+  shadow interrupts is defined by the SoC integrator when wiring the interrupt
+  lines, so they are configurable in the device tree.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: econet,en751221-intc
+
+  reg:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt line connecting this controller to its parent.
+
+  econet,shadow-interrupts:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description:
+      An array of interrupt number pairs where each pair represents a shadow
+      interrupt relationship. The first number in each pair is the primary IRQ,
+      and the second is its shadow IRQ used for VPE#1 control. For example,
+      <8 3> means IRQ 8 is shadowed by IRQ 3, so IRQ 3 cannot be mapped, but
+      when VPE#1 requests IRQ 8, it will manipulate the IRQ 3 mask bit.
+    minItems: 1
+    maxItems: 20
+    items:
+      items:
+        - description: primary per-CPU IRQ
+        - description: shadow IRQ number
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@1fb40000 {
+        compatible = "econet,en751221-intc";
+        reg = <0x1fb40000 0x100>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interrupt-parent = <&cpuintc>;
+        interrupts = <2>;
+
+        econet,shadow-interrupts = <7 2>, <8 3>, <13 12>, <30 29>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
deleted file mode 100644
index 888b2b9f7064..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-EZchip NPS Interrupt Controller
-
-Required properties:
-
-- compatible : should be "ezchip,nps400-ic"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-
-
-Example:
-
-intc: interrupt-controller {
-	compatible = "ezchip,nps400-ic";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.yaml
new file mode 100644
index 000000000000..589c6ebf6c1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ezchip,nps400-ic.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ezchip,nps400-ic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EZchip NPS Interrupt Controller
+
+maintainers:
+  - Noam Camus <noamc@ezchip.com>
+
+properties:
+  compatible:
+    const: ezchip,nps400-ic
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "ezchip,nps400-ic";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt
deleted file mode 100644
index 24428d47f487..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Faraday Technologt FTINTC010 interrupt controller
-
-This interrupt controller is a stock IP block from Faraday Technology found
-in the Gemini SoCs and other designs.
-
-Required properties:
-- compatible: must be one of
-  "faraday,ftintc010"
-  "cortina,gemini-interrupt-controller" (deprecated)
-- reg: The register bank for the interrupt controller.
-- interrupt-controller: Identifies the node as an interrupt controller
-- #interrupt-cells: The number of cells to define the interrupts.
-  Must be 2 as the controller can specify level or rising edge
-  IRQs. The bindings follows the standard binding for controllers
-  with two cells specified in
-  interrupt-controller/interrupts.txt
-
-Example:
-
-interrupt-controller@48000000 {
-	compatible = "faraday,ftintc010"
-	reg = <0x48000000 0x1000>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml
new file mode 100644
index 000000000000..980e5c45f25b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/interrupt-controller/faraday,ftintc010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTINTC010 interrupt controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  This interrupt controller is a stock IP block from Faraday Technology found
+  in the Gemini SoCs and other designs.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: moxa,moxart-ic
+          - const: faraday,ftintc010
+      - enum:
+          - faraday,ftintc010
+          - cortina,gemini-interrupt-controller
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@48000000 {
+        compatible = "faraday,ftintc010";
+        reg = <0x48000000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,icoll.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,icoll.yaml
new file mode 100644
index 000000000000..7b09fd7d588f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,icoll.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,icoll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS icoll Interrupt controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx23-icoll
+              - fsl,imx28-icoll
+          - const: fsl,icoll
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@80000000 {
+        compatible = "fsl,imx28-icoll", "fsl,icoll";
+        reg = <0x80000000 0x2000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
+
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml
new file mode 100644
index 000000000000..6985ee644a25
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml
@@ -0,0 +1,318 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,imx8qxp-dc-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller interrupt controller
+
+description: |
+  The Display Controller has a built-in interrupt controller with the following
+  features for all relevant HW events:
+
+  * Enable bit (mask)
+  * Status bit (set by an HW event)
+  * Preset bit (can be used by SW to set status)
+  * Clear bit (used by SW to reset the status)
+
+  Each interrupt can be connected as IRQ (maskable) and/or NMI (non-maskable).
+  Alternatively the un-masked trigger signals for all HW events are provided,
+  allowing it to use a global interrupt controller instead.
+
+  Each interrupt can be protected against SW running in user mode. In that case,
+  only privileged AHB access can control the interrupt status.
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-intc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    items:
+      - description: store9 shadow load interrupt(blit engine)
+      - description: store9 frame complete interrupt(blit engine)
+      - description: store9 sequence complete interrupt(blit engine)
+      - description:
+          extdst0 shadow load interrupt
+          (display controller, content stream 0)
+      - description:
+          extdst0 frame complete interrupt
+          (display controller, content stream 0)
+      - description:
+          extdst0 sequence complete interrupt
+          (display controller, content stream 0)
+      - description:
+          extdst4 shadow load interrupt
+          (display controller, safety stream 0)
+      - description:
+          extdst4 frame complete interrupt
+          (display controller, safety stream 0)
+      - description:
+          extdst4 sequence complete interrupt
+          (display controller, safety stream 0)
+      - description:
+          extdst1 shadow load interrupt
+          (display controller, content stream 1)
+      - description:
+          extdst1 frame complete interrupt
+          (display controller, content stream 1)
+      - description:
+          extdst1 sequence complete interrupt
+          (display controller, content stream 1)
+      - description:
+          extdst5 shadow load interrupt
+          (display controller, safety stream 1)
+      - description:
+          extdst5 frame complete interrupt
+          (display controller, safety stream 1)
+      - description:
+          extdst5 sequence complete interrupt
+          (display controller, safety stream 1)
+      - description:
+          disengcfg0 shadow load interrupt
+          (display controller, display stream 0)
+      - description:
+          disengcfg0 frame complete interrupt
+          (display controller, display stream 0)
+      - description:
+          disengcfg0 sequence complete interrupt
+          (display controller, display stream 0)
+      - description:
+          framegen0 programmable interrupt0
+          (display controller, display stream 0)
+      - description:
+          framegen0 programmable interrupt1
+          (display controller, display stream 0)
+      - description:
+          framegen0 programmable interrupt2
+          (display controller, display stream 0)
+      - description:
+          framegen0 programmable interrupt3
+          (display controller, display stream 0)
+      - description:
+          signature0 shadow load interrupt
+          (display controller, display stream 0)
+      - description:
+          signature0 measurement valid interrupt
+          (display controller, display stream 0)
+      - description:
+          signature0 error condition interrupt
+          (display controller, display stream 0)
+      - description:
+          disengcfg1 shadow load interrupt
+          (display controller, display stream 1)
+      - description:
+          disengcfg1 frame complete interrupt
+          (display controller, display stream 1)
+      - description:
+          disengcfg1 sequence complete interrupt
+          (display controller, display stream 1)
+      - description:
+          framegen1 programmable interrupt0
+          (display controller, display stream 1)
+      - description:
+          framegen1 programmable interrupt1
+          (display controller, display stream 1)
+      - description:
+          framegen1 programmable interrupt2
+          (display controller, display stream 1)
+      - description:
+          framegen1 programmable interrupt3
+          (display controller, display stream 1)
+      - description:
+          signature1 shadow load interrupt
+          (display controller, display stream 1)
+      - description:
+          signature1 measurement valid interrupt
+          (display controller, display stream 1)
+      - description:
+          signature1 error condition interrupt
+          (display controller, display stream 1)
+      - description: reserved
+      - description:
+          command sequencer error condition interrupt(command sequencer)
+      - description:
+          common control software interrupt0(common control)
+      - description:
+          common control software interrupt1(common control)
+      - description:
+          common control software interrupt2(common control)
+      - description:
+          common control software interrupt3(common control)
+      - description:
+          framegen0 synchronization status activated interrupt
+          (display controller, safety stream 0)
+      - description:
+          framegen0 synchronization status deactivated interrupt
+          (display controller, safety stream 0)
+      - description:
+          framegen0 synchronization status activated interrupt
+          (display controller, content stream 0)
+      - description:
+          framegen0 synchronization status deactivated interrupt
+          (display controller, content stream 0)
+      - description:
+          framegen1 synchronization status activated interrupt
+          (display controller, safety stream 1)
+      - description:
+          framegen1 synchronization status deactivated interrupt
+          (display controller, safety stream 1)
+      - description:
+          framegen1 synchronization status activated interrupt
+          (display controller, content stream 1)
+      - description:
+          framegen1 synchronization status deactivated interrupt
+          (display controller, content stream 1)
+    minItems: 49
+
+  interrupt-names:
+    items:
+      - const: store9_shdload
+      - const: store9_framecomplete
+      - const: store9_seqcomplete
+      - const: extdst0_shdload
+      - const: extdst0_framecomplete
+      - const: extdst0_seqcomplete
+      - const: extdst4_shdload
+      - const: extdst4_framecomplete
+      - const: extdst4_seqcomplete
+      - const: extdst1_shdload
+      - const: extdst1_framecomplete
+      - const: extdst1_seqcomplete
+      - const: extdst5_shdload
+      - const: extdst5_framecomplete
+      - const: extdst5_seqcomplete
+      - const: disengcfg_shdload0
+      - const: disengcfg_framecomplete0
+      - const: disengcfg_seqcomplete0
+      - const: framegen0_int0
+      - const: framegen0_int1
+      - const: framegen0_int2
+      - const: framegen0_int3
+      - const: sig0_shdload
+      - const: sig0_valid
+      - const: sig0_error
+      - const: disengcfg_shdload1
+      - const: disengcfg_framecomplete1
+      - const: disengcfg_seqcomplete1
+      - const: framegen1_int0
+      - const: framegen1_int1
+      - const: framegen1_int2
+      - const: framegen1_int3
+      - const: sig1_shdload
+      - const: sig1_valid
+      - const: sig1_error
+      - const: reserved
+      - const: cmdseq_error
+      - const: comctrl_sw0
+      - const: comctrl_sw1
+      - const: comctrl_sw2
+      - const: comctrl_sw3
+      - const: framegen0_primsync_on
+      - const: framegen0_primsync_off
+      - const: framegen0_secsync_on
+      - const: framegen0_secsync_off
+      - const: framegen1_primsync_on
+      - const: framegen1_primsync_off
+      - const: framegen1_secsync_on
+      - const: framegen1_secsync_off
+    minItems: 49
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+
+    interrupt-controller@56180040 {
+        compatible = "fsl,imx8qxp-dc-intc";
+        reg = <0x56180040 0x60>;
+        clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+        interrupt-controller;
+        interrupt-parent = <&dc0_irqsteer>;
+        #interrupt-cells = <1>;
+        interrupts = <448>, <449>, <450>,  <64>,
+                      <65>,  <66>,  <67>,  <68>,
+                      <69>,  <70>, <193>, <194>,
+                     <195>, <196>, <197>,  <72>,
+                      <73>,  <74>,  <75>,  <76>,
+                      <77>,  <78>,  <79>,  <80>,
+                      <81>, <199>, <200>, <201>,
+                     <202>, <203>, <204>, <205>,
+                     <206>, <207>, <208>,   <5>,
+                       <0>,   <1>,   <2>,   <3>,
+                       <4>,  <82>,  <83>,  <84>,
+                      <85>, <209>, <210>, <211>,
+                     <212>;
+        interrupt-names = "store9_shdload",
+                          "store9_framecomplete",
+                          "store9_seqcomplete",
+                          "extdst0_shdload",
+                          "extdst0_framecomplete",
+                          "extdst0_seqcomplete",
+                          "extdst4_shdload",
+                          "extdst4_framecomplete",
+                          "extdst4_seqcomplete",
+                          "extdst1_shdload",
+                          "extdst1_framecomplete",
+                          "extdst1_seqcomplete",
+                          "extdst5_shdload",
+                          "extdst5_framecomplete",
+                          "extdst5_seqcomplete",
+                          "disengcfg_shdload0",
+                          "disengcfg_framecomplete0",
+                          "disengcfg_seqcomplete0",
+                          "framegen0_int0",
+                          "framegen0_int1",
+                          "framegen0_int2",
+                          "framegen0_int3",
+                          "sig0_shdload",
+                          "sig0_valid",
+                          "sig0_error",
+                          "disengcfg_shdload1",
+                          "disengcfg_framecomplete1",
+                          "disengcfg_seqcomplete1",
+                          "framegen1_int0",
+                          "framegen1_int1",
+                          "framegen1_int2",
+                          "framegen1_int3",
+                          "sig1_shdload",
+                          "sig1_valid",
+                          "sig1_error",
+                          "reserved",
+                          "cmdseq_error",
+                          "comctrl_sw0",
+                          "comctrl_sw1",
+                          "comctrl_sw2",
+                          "comctrl_sw3",
+                          "framegen0_primsync_on",
+                          "framegen0_primsync_off",
+                          "framegen0_secsync_on",
+                          "framegen0_secsync_off",
+                          "framegen1_primsync_on",
+                          "framegen1_primsync_off",
+                          "framegen1_secsync_on",
+                          "framegen1_secsync_off";
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
index 1d6e0f64a807..78baa0a571cf 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale INTMUX interrupt multiplexer
 
 maintainers:
-  - Joakim Zhang <qiangqing.zhang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - NXP Linux Team <linux-imx@nxp.com>
 
 properties:
   compatible:
@@ -36,6 +37,9 @@ properties:
   clock-names:
     const: ipg
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
index bcb5e20fa9ca..5c768c1e159c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
@@ -14,7 +14,13 @@ properties:
     oneOf:
       - const: fsl,imx-irqsteer
       - items:
-          - const: fsl,imx8m-irqsteer
+          - enum:
+              - fsl,imx8m-irqsteer
+              - fsl,imx8mp-irqsteer
+              - fsl,imx8qm-irqsteer
+              - fsl,imx8qxp-irqsteer
+              - fsl,imx94-irqsteer
+              - fsl,imx95-irqsteer
           - const: fsl,imx-irqsteer
 
   reg:
@@ -42,19 +48,22 @@ properties:
   clock-names:
     const: ipg
 
+  power-domains:
+    maxItems: 1
+
   interrupt-controller: true
 
   "#interrupt-cells":
     const: 1
 
   fsl,channel:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       u32 value representing the output channel that all input IRQs should be
       steered into.
 
   fsl,num-irqs:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       u32 value representing the number of input interrupts of this channel,
       should be multiple of 32 input interrupts and up to 512 interrupts.
@@ -70,6 +79,23 @@ required:
   - fsl,channel
   - fsl,num-irqs
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mp-irqsteer
+              - fsl,imx8qm-irqsteer
+              - fsl,imx8qxp-irqsteer
+              - fsl,imx95-irqsteer
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
deleted file mode 100644
index 4d47df1a5c91..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale Layerscape external IRQs
-
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
-LS1088A, LS208xA, LX216xA) support inverting
-the polarity of certain external interrupt lines.
-
-The device node must be a child of the node representing the
-Supplemental Configuration Unit (SCFG).
-
-Required properties:
-- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
-  "fsl,ls1043a-extirq": for LS1043A, LS1046A.
-  "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
-- #interrupt-cells: Must be 2. The first element is the index of the
-  external interrupt line. The second element is the trigger type.
-- #address-cells: Must be 0.
-- interrupt-controller: Identifies the node as an interrupt controller
-- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
-  the SCFG or the External Interrupt Control Register (IRQCR) in
-  the ISC.
-- interrupt-map: Specifies the mapping from external interrupts to GIC
-  interrupts.
-- interrupt-map-mask: Must be <0xffffffff 0>.
-
-Example:
-	scfg: scfg@1570000 {
-		compatible = "fsl,ls1021a-scfg", "syscon";
-		reg = <0x0 0x1570000 0x0 0x10000>;
-		big-endian;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x1570000 0x10000>;
-
-		extirq: interrupt-controller@1ac {
-			compatible = "fsl,ls1021a-extirq";
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x1ac 4>;
-			interrupt-map =
-				<0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				<1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-				<2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-				<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-				<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-				<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-map-mask = <0xffffffff 0x0>;
-		};
-	};
-
-
-	interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-			      <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
new file mode 100644
index 000000000000..7ff4efc4758a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape External Interrupt Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
+  LX216xA) support inverting the polarity of certain external interrupt
+  lines.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,ls1021a-extirq
+          - fsl,ls1043a-extirq
+          - fsl,ls1088a-extirq
+      - items:
+          - enum:
+              - fsl,ls1046a-extirq
+          - const: fsl,ls1043a-extirq
+      - items:
+          - enum:
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+          - const: fsl,ls1088a-extirq
+
+  '#interrupt-cells':
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+    description:
+      Specifies the Interrupt Polarity Control Register (INTPCR) in the
+      SCFG or the External Interrupt Control Register (IRQCR) in the ISC.
+
+  interrupt-map:
+    description: Specifies the mapping from external interrupts to GIC interrupts.
+
+  interrupt-map-mask: true
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupt-map
+  - interrupt-map-mask
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1021a-extirq
+    then:
+      properties:
+        interrupt-map:
+          minItems: 6
+          maxItems: 6
+        interrupt-map-mask:
+          items:
+            - const: 0x7
+            - const: 0
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1043a-extirq
+              - fsl,ls1046a-extirq
+    then:
+      properties:
+        interrupt-map:
+          minItems: 12
+          maxItems: 12
+        interrupt-map-mask:
+          items:
+            - const: 0xf
+            - const: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1088a-extirq
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+# The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT
+# function to parser interrupt-map. So it doesn't consider '#address-size'
+# in parent interrupt controller, such as GIC.
+#
+# When dt-binding verify interrupt-map, item data matrix is spitted at
+# incorrect position. Remove interrupt-map restriction because it always
+# wrong.
+
+    then:
+      properties:
+        interrupt-map-mask:
+          items:
+            - const: 0xf
+            - const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    interrupt-controller@1ac {
+            compatible = "fsl,ls1021a-extirq";
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            reg = <0x1ac 4>;
+            interrupt-map =
+                    <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                    <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+                    <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+                    <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+                    <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                    <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-map-mask = <0x7 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-msi.yaml
new file mode 100644
index 000000000000..9ba8d4d73351
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-msi.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape SCFG PCIe MSI controller
+
+description: |
+  This interrupt controller hardware is a second level interrupt controller that
+  is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+  platforms. If interrupt-parent is not provided, the default parent interrupt
+  controller will be used.
+
+  Each PCIe node needs to have property msi-parent that points to
+  MSI controller node
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,ls1012a-msi
+      - fsl,ls1021a-msi
+      - fsl,ls1043a-msi
+      - fsl,ls1043a-v1.1-msi
+      - fsl,ls1046a-msi
+
+  reg:
+    maxItems: 1
+
+  '#msi-cells':
+    const: 1
+
+  interrupts:
+    items:
+      - description: Shared MSI interrupt group 0
+      - description: Shared MSI interrupt group 1
+      - description: Shared MSI interrupt group 2
+      - description: Shared MSI interrupt group 3
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - msi-controller
+  - interrupts
+
+allOf:
+  - $ref: msi-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1046a-msi
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@1571000 {
+        compatible = "fsl,ls1043a-msi";
+        reg = <0x1571000 0x8>;
+        msi-controller;
+        #msi-cells = <1>;
+        interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
deleted file mode 100644
index 454ce04d6787..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-* Freescale Layerscape SCFG PCIe MSI controller
-
-Required properties:
-
-- compatible: should be "fsl,<soc-name>-msi" to identify
-	      Layerscape PCIe MSI controller block such as:
-              "fsl,ls1021a-msi"
-              "fsl,ls1043a-msi"
-              "fsl,ls1046a-msi"
-              "fsl,ls1043a-v1.1-msi"
-              "fsl,ls1012a-msi"
-- msi-controller: indicates that this is a PCIe MSI controller node
-- reg: physical base address of the controller and length of memory mapped.
-- interrupts: an interrupt to the parent interrupt controller.
-
-This interrupt controller hardware is a second level interrupt controller that
-is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
-platforms. If interrupt-parent is not provided, the default parent interrupt
-controller will be used.
-Each PCIe node needs to have property msi-parent that points to
-MSI controller node
-
-Examples:
-
-	msi1: msi-controller@1571000 {
-		compatible = "fsl,ls1043a-msi";
-		reg = <0x0 0x1571000 0x0 0x8>,
-		msi-controller;
-		interrupts = <0 116 0x4>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mpic-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mpic-msi.yaml
new file mode 100644
index 000000000000..78d784973661
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mpic-msi.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mpic-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MSI interrupt controller
+
+description: |
+  The Freescale hypervisor and msi-address-64
+  -------------------------------------------
+
+  Normally, PCI devices have access to all of CCSR via an ATMU mapping.  The
+  Freescale MSI driver calculates the address of MSIIR (in the MSI register
+  block) and sets that address as the MSI message address.
+
+  In a virtualized environment, the hypervisor may need to create an IOMMU
+  mapping for MSIIR.  The Freescale ePAPR hypervisor has this requirement
+  because of hardware limitations of the Peripheral Access Management Unit
+  (PAMU), which is currently the only IOMMU that the hypervisor supports.
+  The ATMU is programmed with the guest physical address, and the PAMU
+  intercepts transactions and reroutes them to the true physical address.
+
+  In the PAMU, each PCI controller is given only one primary window.  The
+  PAMU restricts DMA operations so that they can only occur within a window.
+  Because PCI devices must be able to DMA to memory, the primary window must
+  be used to cover all of the guest's memory space.
+
+  PAMU primary windows can be divided into 256 subwindows, and each
+  subwindow can have its own address mapping ("guest physical" to "true
+  physical").  However, each subwindow has to have the same alignment, which
+  means they cannot be located at just any address.  Because of these
+  restrictions, it is usually impossible to create a 4KB subwindow that
+  covers MSIIR where it's normally located.
+
+  Therefore, the hypervisor has to create a subwindow inside the same
+  primary window used for memory, but mapped to the MSIR block (where MSIIR
+  lives).  The first subwindow after the end of guest memory is used for
+  this.  The address specified in the msi-address-64 property is the PCI
+  address of MSIIR.  The hypervisor configures the PAMU to map that address to
+  the true physical address of MSIIR.
+
+maintainers:
+  - J. Neuschäfer <j.ne@posteo.net>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,mpic-msi
+          - fsl,mpic-msi-v4.3
+          - fsl,ipic-msi
+          - fsl,vmpic-msi
+          - fsl,vmpic-msi-v4.3
+      - items:
+          - enum:
+              - fsl,mpc8572-msi
+              - fsl,mpc8610-msi
+              - fsl,mpc8641-msi
+          - const: fsl,mpic-msi
+
+  reg:
+    minItems: 1
+    items:
+      - description: Address and length of the shared message interrupt
+          register set
+      - description: Address of aliased MSIIR or MSIIR1 register for platforms
+          that have such an alias. If using MSIIR1, the second region must be
+          added because different MSI group has different MSIIR1 offset.
+
+  interrupts:
+    minItems: 1
+    maxItems: 16
+    description:
+      Each one of the interrupts here is one entry per 32 MSIs, and routed to
+      the host interrupt controller. The interrupts should be set as edge
+      sensitive. If msi-available-ranges is present, only the interrupts that
+      correspond to available ranges shall be present.
+
+  msi-available-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: First MSI interrupt in this range
+        - description: Number of MSI interrupts in this range
+    description:
+      Define which MSI interrupt can be used in the 256 MSI interrupts.
+      If not specified, all the MSI interrupts can be used.
+      Each available range must begin and end on a multiple of 32 (i.e. no
+      splitting an individual MSI register or the associated PIC interrupt).
+
+  msi-address-64:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      64-bit PCI address of the MSIIR register. The MSIIR register is used for
+      MSI messaging.  The address of MSIIR in PCI address space is the MSI
+      message address.
+
+      This property may be used in virtualized environments where the hypervisor
+      has created an alternate mapping for the MSIR block.  See the top-level
+      description for an explanation.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,mpic-msi-v4.3
+              - fsl,vmpic-msi-v4.3
+    then:
+      properties:
+        interrupts:
+          minItems: 16
+          description:
+            Version 4.3 implies that there are 16 shared interrupts, and they
+            are configured through MSIIR1.
+
+        # MPIC v4.3 does not support this property because the 32 interrupts of
+        # an individual register are not continuous when using MSIIR1.
+        msi-available-ranges: false
+
+        reg:
+          minItems: 2
+
+    else:
+      properties:
+        interrupts:
+          maxItems: 8
+          description:
+            In versions before 4.3, only 8 shared interrupts are available, and
+            they are configured through MSIIR.
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    msi@41600 {
+            compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+            reg = <0x41600 0x80>;
+            msi-available-ranges = <0 0x100>;
+            interrupts = <0xe0 0>, <0xe1 0>, <0xe2 0>, <0xe3 0>,
+                         <0xe4 0>, <0xe5 0>, <0xe6 0>, <0xe7 0>;
+    };
+
+  - |
+    msi@41600 {
+            compatible = "fsl,mpic-msi-v4.3";
+            reg = <0x41600 0x200>, <0x44148 4>;
+            interrupts = <0xe0 0 0 0>, <0xe1 0 0 0>, <0xe2 0 0 0>, <0xe3 0 0 0>,
+                         <0xe4 0 0 0>, <0xe5 0 0 0>, <0xe6 0 0 0>, <0xe7 0 0 0>,
+                         <0x100 0 0 0>, <0x101 0 0 0>, <0x102 0 0 0>, <0x103 0 0 0>,
+                         <0x104 0 0 0>, <0x105 0 0 0>, <0x106 0 0 0>, <0x107 0 0 0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
new file mode 100644
index 000000000000..b5282c857f44
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX Messaging Unit (MU) work as msi controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The Messaging Unit module enables two processors within the SoC to
+  communicate and coordinate by passing messages (e.g. data, status
+  and control) through the MU interface. The MU also provides the ability
+  for one processor (A side) to signal the other processor (B side) using
+  interrupts.
+
+  Because the MU manages the messaging between processors, the MU uses
+  different clocks (from each side of the different peripheral buses).
+  Therefore, the MU must synchronize the accesses from one side to the
+  other. The MU accomplishes synchronization using two sets of matching
+  registers (Processor A-side, Processor B-side).
+
+  MU can work as msi interrupt controller to do doorbell
+
+allOf:
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mu-msi
+      - fsl,imx7ulp-mu-msi
+      - fsl,imx8ulp-mu-msi
+      - fsl,imx8ulp-mu-msi-s4
+
+  reg:
+    items:
+      - description: a side register base address
+      - description: b side register base address
+
+  reg-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupts:
+    description: a side interrupt number.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: a side power domain
+      - description: b side power domain
+
+  power-domain-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  msi-controller: true
+
+  "#msi-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - msi-controller
+  - "#msi-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    msi-controller@5d270000 {
+        compatible = "fsl,imx6sx-mu-msi";
+        msi-controller;
+        #msi-cells = <0>;
+        reg = <0x5d270000 0x10000>,     /* A side */
+              <0x5d300000 0x10000>;     /* B side */
+        reg-names = "processor-a-side", "processor-b-side";
+        interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd IMX_SC_R_MU_12A>,
+                        <&pd IMX_SC_R_MU_12B>;
+        power-domain-names = "processor-a-side", "processor-b-side";
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,tzic.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,tzic.yaml
new file mode 100644
index 000000000000..5f2c8761a31d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,tzic.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,tzic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale tzic Interrupt controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx51-tzic
+              - fsl,imx53-tzic
+          - const: fsl,tzic
+      - items:
+          - const: fsl,imx50-tzic
+          - const: fsl,imx53-tzic
+          - const: fsl,tzic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    tz-interrupt-controller@fffc000 {
+        compatible = "fsl,imx53-tzic", "fsl,tzic";
+        reg = <0x0fffc000 0x4000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml
new file mode 100644
index 000000000000..55b1ae863b91
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,vf610-mscm-ir.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Vybrid Miscellaneous System Control - Interrupt Router
+
+description:
+  The MSCM IP contains multiple sub modules, this binding describes the second
+  block of registers which control the interrupt router. The interrupt router
+  allows to configure the recipient of each peripheral interrupt. Furthermore
+  it controls the directed processor interrupts. The module is available in all
+  Vybrid SoC's but is only really useful in dual core configurations (VF6xx
+  which comes with a Cortex-A5/Cortex-M4 combination).
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-mscm-ir
+
+  reg:
+    maxItems: 1
+
+  fsl,cpucfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The handle to the MSCM CPU configuration node, required
+      to get the current CPU ID
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      Two cells, interrupt number and cells.
+      The hardware interrupt number according to interrupt
+      assignment of the interrupt router is required.
+      Flags get passed only when using GIC as parent. Flags
+      encoding as documented by the GIC bindings.
+
+required:
+  - compatible
+  - reg
+  - fsl,cpucfg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@40001800 {
+        compatible = "fsl,vf610-mscm-ir";
+        reg = <0x40001800 0x400>;
+        fsl,cpucfg = <&mscm_cpucfg>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&intc>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt
deleted file mode 100644
index 35f752706e7d..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Android Goldfish PIC
-
-Android Goldfish programmable interrupt device used by Android
-emulator.
-
-Required properties:
-
-- compatible : should contain "google,goldfish-pic"
-- reg        : <registers mapping>
-- interrupts : <interrupt mapping>
-
-Example for mips when used in cascade mode:
-
-        cpuintc {
-                #interrupt-cells = <0x1>;
-                #address-cells = <0>;
-                interrupt-controller;
-                compatible = "mti,cpu-interrupt-controller";
-        };
-
-        interrupt-controller@1f000000 {
-                compatible = "google,goldfish-pic";
-                reg = <0x1f000000 0x1000>;
-
-                interrupt-controller;
-                #interrupt-cells = <0x1>;
-
-                interrupt-parent = <&cpuintc>;
-                interrupts = <0x2>;
-        };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.yaml
new file mode 100644
index 000000000000..ac3c3c3ca186
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/google,goldfish-pic.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/google,goldfish-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Android Goldfish PIC
+
+maintainers:
+  - Miodrag Dinic <miodrag.dinic@mips.com>
+
+description:
+  Android Goldfish programmable interrupt device used by Android emulator.
+
+properties:
+  compatible:
+    const: google,goldfish-pic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    interrupt-controller@1f000000 {
+        compatible = "google,goldfish-pic";
+        reg = <0x1f000000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <2>;
+    };
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
deleted file mode 100644
index a6813a071f15..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Hisilicon mbigen device tree bindings.
-=======================================
-
-Mbigen means: message based interrupt generator.
-
-MBI is kind of msi interrupt only used on Non-PCI devices.
-
-To reduce the wired interrupt number connected to GIC,
-Hisilicon designed mbigen to collect and generate interrupt.
-
-
-Non-pci devices can connect to mbigen and generate the
-interrupt by writing ITS register.
-
-The mbigen chip and devices connect to mbigen have the following properties:
-
-Mbigen main node required properties:
--------------------------------------------
-- compatible: Should be "hisilicon,mbigen-v2"
-
-- reg: Specifies the base physical address and size of the Mbigen
-  registers.
-
-Mbigen sub node required properties:
-------------------------------------------
-- interrupt controller: Identifies the node as an interrupt controller
-
-- msi-parent: Specifies the MSI controller this mbigen use.
-  For more detail information,please refer to the generic msi-parent binding in
-  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
-
-- num-pins: the total number of pins implemented in this Mbigen
-  instance.
-
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value must be 2.
-
-  The 1st cell is hardware pin number of the interrupt.This number is local to
-  each mbigen chip and in the range from 0 to the maximum interrupts number
-  of the mbigen.
-
-  The 2nd cell is the interrupt trigger type.
-	The value of this cell should be:
-	1: rising edge triggered
-	or
-	4: high level triggered
-
-Examples:
-
-	mbigen_chip_dsa {
-			compatible = "hisilicon,mbigen-v2";
-			reg = <0x0 0xc0080000 0x0 0x10000>;
-
-			mbigen_gmac:intc_gmac {
-				interrupt-controller;
-				msi-parent = <&its_dsa 0x40b1c>;
-				num-pins = <9>;
-				#interrupt-cells = <2>;
-			};
-
-			mbigen_i2c:intc_i2c {
-				interrupt-controller;
-				msi-parent = <&its_dsa 0x40b0e>;
-				num-pins = <2>;
-				#interrupt-cells = <2>;
-			};
-	};
-
-Devices connect to mbigen required properties:
-----------------------------------------------------
--interrupts:Specifies the interrupt source.
- For the specific information of each cell in this property,please refer to
- the "interrupt-cells" description mentioned above.
-
-Examples:
-	gmac0: ethernet@c2080000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0 0xc2080000 0 0x20000>,
-		      <0 0xc0000000 0 0x1000>;
-		interrupt-parent  = <&mbigen_device_gmac>;
-		interrupts =	<656 1>,
-				<657 1>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.yaml b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.yaml
new file mode 100644
index 000000000000..326424e6e02a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/hisilicon,mbigen-v2.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/hisilicon,mbigen-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hisilicon mbigen v2
+
+maintainers:
+  - Wei Xu <xuwei5@hisilicon.com>
+
+description: >
+  Mbigen means: message based interrupt generator.
+
+  MBI is kind of msi interrupt only used on Non-PCI devices.
+
+  To reduce the wired interrupt number connected to GIC, Hisilicon designed
+  mbigen to collect and generate interrupt.
+
+  Non-pci devices can connect to mbigen and generate the interrupt by writing
+  ITS register.
+
+properties:
+  compatible:
+    const: hisilicon,mbigen-v2
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+  additionalProperties: false
+
+  properties:
+    interrupt-controller: true
+
+    '#interrupt-cells':
+      const: 2
+
+    msi-parent:
+      maxItems: 1
+
+    num-pins:
+      description: The total number of pins implemented in this Mbigen instance.
+      $ref: /schemas/types.yaml#/definitions/uint32
+
+  required:
+    - interrupt-controller
+    - "#interrupt-cells"
+    - msi-parent
+    - num-pins
+
+examples:
+  - |
+    mbigen@c0080000 {
+        compatible = "hisilicon,mbigen-v2";
+        reg = <0xc0080000 0x10000>;
+
+        mbigen_gmac: intc_gmac {
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            msi-parent = <&its_dsa 0x40b1c>;
+            num-pins = <9>;
+        };
+
+        mbigen_i2c: intc_i2c {
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            msi-parent = <&its_dsa 0x40b0e>;
+            num-pins = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
index 160ff4b07cac..afb3dd80b643 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/idt,32434-pic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: IDT 79RC32434 Interrupt Controller Device Tree Bindings
+title: IDT 79RC32434 Interrupt Controller
 
 maintainers:
   - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt
deleted file mode 100644
index 5dc2a55ad811..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt
+++ /dev/null
@@ -1,105 +0,0 @@
-* ImgTec Powerdown Controller (PDC) Interrupt Controller Binding
-
-This binding specifies what properties must be available in the device tree
-representation of a PDC IRQ controller. This has a number of input interrupt
-lines which can wake the system, and are passed on through output interrupt
-lines.
-
-Required properties:
-
-    - compatible: Specifies the compatibility list for the interrupt controller.
-      The type shall be <string> and the value shall include "img,pdc-intc".
-
-    - reg: Specifies the base PDC physical address(s) and size(s) of the
-      addressable register space. The type shall be <prop-encoded-array>.
-
-    - interrupt-controller: The presence of this property identifies the node
-      as an interrupt controller. No property value shall be defined.
-
-    - #interrupt-cells: Specifies the number of cells needed to encode an
-      interrupt source. The type shall be a <u32> and the value shall be 2.
-
-    - num-perips: Number of waking peripherals.
-
-    - num-syswakes: Number of SysWake inputs.
-
-    - interrupts: List of interrupt specifiers. The first specifier shall be the
-      shared SysWake interrupt, and remaining specifies shall be PDC peripheral
-      interrupts in order.
-
-* Interrupt Specifier Definition
-
-  Interrupt specifiers consists of 2 cells encoded as follows:
-
-    - <1st-cell>: The interrupt-number that identifies the interrupt source.
-                    0-7:  Peripheral interrupts
-                    8-15: SysWake interrupts
-
-    - <2nd-cell>: The level-sense information, encoded using the Linux interrupt
-                  flags as follows (only 4 valid for peripheral interrupts):
-                    0 = none (decided by software)
-                    1 = low-to-high edge triggered
-                    2 = high-to-low edge triggered
-                    3 = both edge triggered
-                    4 = active-high level-sensitive (required for perip irqs)
-                    8 = active-low level-sensitive
-
-* Examples
-
-Example 1:
-
-	/*
-	 * TZ1090 PDC block
-	 */
-	pdc: pdc@02006000 {
-		// This is an interrupt controller node.
-		interrupt-controller;
-
-		// Three cells to encode interrupt sources.
-		#interrupt-cells = <2>;
-
-		// Offset address of 0x02006000 and size of 0x1000.
-		reg = <0x02006000 0x1000>;
-
-		// Compatible with Meta hardware trigger block.
-		compatible = "img,pdc-intc";
-
-		// Three peripherals are connected.
-		num-perips = <3>;
-
-		// Four SysWakes are connected.
-		num-syswakes = <4>;
-
-		interrupts = <18 4 /* level */>, /* Syswakes */
-			     <30 4 /* level */>, /* Peripheral 0 (RTC) */
-			     <29 4 /* level */>, /* Peripheral 1 (IR) */
-			     <31 4 /* level */>; /* Peripheral 2 (WDT) */
-	};
-
-Example 2:
-
-	/*
-	 * An SoC peripheral that is wired through the PDC.
-	 */
-	rtc0 {
-		// The interrupt controller that this device is wired to.
-		interrupt-parent = <&pdc>;
-
-		// Interrupt source Peripheral 0
-		interrupts = <0   /* Peripheral 0 (RTC) */
-		              4>  /* IRQ_TYPE_LEVEL_HIGH */
-	};
-
-Example 3:
-
-	/*
-	 * An interrupt generating device that is wired to a SysWake pin.
-	 */
-	touchscreen0 {
-		// The interrupt controller that this device is wired to.
-		interrupt-parent = <&pdc>;
-
-		// Interrupt source SysWake 0 that is active-low level-sensitive
-		interrupts = <8 /* SysWake0 */
-			      8 /* IRQ_TYPE_LEVEL_LOW */>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.yaml
new file mode 100644
index 000000000000..99e7a4281595
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/img,pdc-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ImgTec Powerdown Controller (PDC) Interrupt Controller
+
+maintainers:
+  - James Hogan <jhogan@kernel.org>
+
+description:
+  ImgTec Powerdown Controller (PDC) Interrupt Controller has a number of input
+  interrupt lines which can wake the system, and are passed on through output
+  interrupt lines.
+
+properties:
+  compatible:
+    const: img,pdc-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: >
+      <1st-cell>: The interrupt-number that identifies the interrupt source.
+        0-7:  Peripheral interrupts
+        8-15: SysWake interrupts
+
+      <2nd-cell>: The level-sense information, encoded using the Linux interrupt
+        flags as follows (only 4 valid for peripheral interrupts):
+        0 = none (decided by software)
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        3 = both edge triggered
+        4 = active-high level-sensitive (required for perip irqs)
+        8 = active-low level-sensitive
+    const: 2
+
+  num-perips:
+    description: Number of waking peripherals
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 8
+
+  num-syswakes:
+    description: Number of SysWake inputs
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 8
+
+  interrupts:
+    description:
+      First entry is syswake IRQ. Subsequent entries are 1 per peripheral.
+    minItems: 2
+    maxItems: 9
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - num-perips
+  - num-syswakes
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@2006000 {
+        compatible = "img,pdc-intc";
+        reg = <0x02006000 0x1000>;
+        interrupts = <18 4>, <30 4>, <29 4>, <31 4>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        num-perips = <3>;
+        num-syswakes = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
index 0358a7739c8e..609308a5f91d 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/ingenic,intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs interrupt controller devicetree bindings
+title: Ingenic SoCs interrupt controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt
deleted file mode 100644
index 7d19f494f19a..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Interrupt chips
----------------
-
-* Intel I/O Advanced Programmable Interrupt Controller (IO APIC)
-
-  Required properties:
-  --------------------
-     compatible = "intel,ce4100-ioapic";
-     #interrupt-cells = <2>;
-
-  Device's interrupt property:
-
-     interrupts = <P S>;
-
-  The first number (P) represents the interrupt pin which is wired to the
-  IO APIC. The second number (S) represents the sense of interrupt which
-  should be configured and can be one of:
-    0 - Edge Rising
-    1 - Level Low
-    2 - Level High
-    3 - Edge Falling
-
-* Local APIC
-  Required property:
-
-     compatible = "intel,ce4100-lapic";
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml
new file mode 100644
index 000000000000..a3ac818f067d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ce4100-ioapic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel I/O Advanced Programmable Interrupt Controller (IO APIC)
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+  Intel's Advanced Programmable Interrupt Controller (APIC) is a
+  family of interrupt controllers. The APIC is a split
+  architecture design, with a local component (LAPIC) integrated
+  into the processor itself and an external I/O APIC. Local APIC
+  (lapic) receives interrupts from the processor's interrupt pins,
+  from internal sources and from an external I/O APIC (ioapic).
+  And it sends these to the processor core for handling.
+  See [1] Chapter 8 for more details.
+
+  Many of the Intel's generic devices like hpet, ioapic, lapic have
+  the ce4100 name in their compatible property names because they
+  first appeared in CE4100 SoC.
+
+  This schema defines bindings for I/O APIC interrupt controller.
+
+  [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf
+
+properties:
+  compatible:
+    const: intel,ce4100-ioapic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ioapic1: interrupt-controller@fec00000 {
+        compatible = "intel,ce4100-ioapic";
+        reg = <0xfec00000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml
new file mode 100644
index 000000000000..6b20a5fa8590
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ce4100-lapic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Local Advanced Programmable Interrupt Controller (LAPIC)
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+  Intel's Advanced Programmable Interrupt Controller (APIC) is a
+  family of interrupt controllers. The APIC is a split
+  architecture design, with a local component (LAPIC) integrated
+  into the processor itself and an external I/O APIC. Local APIC
+  (lapic) receives interrupts from the processor's interrupt pins,
+  from internal sources and from an external I/O APIC (ioapic).
+  And it sends these to the processor core for handling.
+  See [1] Chapter 8 for more details.
+
+  Many of the Intel's generic devices like hpet, ioapic, lapic have
+  the ce4100 name in their compatible property names because they
+  first appeared in CE4100 SoC.
+
+  This schema defines bindings for local APIC interrupt controller.
+
+  [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf
+
+properties:
+  compatible:
+    const: intel,ce4100-lapic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  intel,virtual-wire-mode:
+    description: Intel defines a few possible interrupt delivery
+      modes. With respect to boot/init time, mainly two interrupt
+      delivery modes are possible.
+      PIC Mode - Legacy external 8259 compliant PIC interrupt controller.
+      Virtual Wire Mode - use lapic as virtual wire interrupt delivery mode.
+      For ACPI or MPS spec compliant systems, it is figured out by some read
+      only bit field/s available in their respective defined data structures.
+      For OF based systems, it is by default set to PIC mode.
+      But if this optional boolean property is set, then the interrupt delivery
+      mode is configured to virtual wire compatibility mode.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    lapic0: interrupt-controller@fee00000 {
+        compatible = "intel,ce4100-lapic";
+        reg = <0xfee00000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        intel,virtual-wire-mode;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
index 14dced11877b..a02a6b5af205 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -2,8 +2,8 @@
 # Copyright 2018 Linaro Ltd.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/intel,ixp4xx-interrupt.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ixp4xx-interrupt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Intel IXP4xx XScale Networking Processors Interrupt Controller
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
deleted file mode 100644
index ee2ad36f8df8..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-J-Core Advanced Interrupt Controller
-
-Required properties:
-
-- compatible: Should be "jcore,aic1" for the (obsolete) first-generation aic
-  with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
-  the "aic2" core with 64 interrupts.
-
-- reg: Memory region(s) for configuration. For SMP, there should be one
-  region per cpu, indexed by the sequential, zero-based hardware cpu
-  number.
-
-- interrupt-controller: Identifies the node as an interrupt controller
-
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-
-
-Example:
-
-aic: interrupt-controller@200 {
-	compatible = "jcore,aic2";
-	reg = < 0x200 0x30 0x500 0x30 >;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.yaml
new file mode 100644
index 000000000000..df8abc24591c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/jcore,aic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: J-Core Advanced Interrupt Controller
+
+maintainers:
+  - Rich Felker <dalias@libc.org>
+
+properties:
+  compatible:
+    enum:
+      - jcore,aic1
+      - jcore,aic2
+
+  reg:
+    description: Memory region(s) for configuration. For SMP, there should be one
+      region per CPU, indexed by the sequential, zero-based hardware CPU number.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    aic: interrupt-controller@200 {
+        compatible = "jcore,aic2";
+        reg = <0x200 0x30>, <0x500 0x30>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
index e8dfa6507f64..87df07beda59 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 description: |
   This module is part of the sl28cpld multi-function device. For more
-  details see ../mfd/kontron,sl28cpld.yaml.
+  details see ../embedded-controller/kontron,sl28cpld.yaml.
 
   The following interrupts are available. All types and levels are fixed
   and handled by the board management controller.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml
new file mode 100644
index 000000000000..adf989976dcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,cpu-interrupt-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LoongArch CPU Interrupt Controller
+
+maintainers:
+  - Liu Peibao <liupeibao@loongson.cn>
+
+properties:
+  compatible:
+    const: loongson,cpu-interrupt-controller
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    interrupt-controller {
+      compatible = "loongson,cpu-interrupt-controller";
+      #interrupt-cells = <1>;
+      interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
new file mode 100644
index 000000000000..393c128a41d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,eiointc.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,eiointc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson Extended I/O Interrupt Controller
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+description: |
+  This interrupt controller is found on the Loongson-3 family chips and
+  Loongson-2K series chips and is used to distribute interrupts directly to
+  individual cores without forwarding them through the HT's interrupt line.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k0500-eiointc
+      - loongson,ls2k2000-eiointc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    eiointc: interrupt-controller@1fe11600 {
+      compatible = "loongson,ls2k0500-eiointc";
+      reg = <0x1fe10000 0x10000>;
+
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <3>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
index d6bc1a687fc7..f0acd5671bb1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Loongson-3 HyperTransport Interrupt Controller
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
index 87a74558204f..1d145763908e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htvec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,htvec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Loongson-3 HyperTransport Interrupt Vector Controller
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
index 750cc44628e9..f63b23f48d8e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Loongson Local I/O Interrupt Controller
 
@@ -11,8 +11,13 @@ maintainers:
 
 description: |
   This interrupt controller is found in the Loongson-3 family of chips and
-  Loongson-2K1000 chip, as the primary package interrupt controller which
+  Loongson-2K series chips, as the primary package interrupt controller which
   can route local I/O interrupt to interrupt lines of cores.
+  Be aware of the following points.
+  1.The Loongson-2K0500 is a single core CPU;
+  2.The Loongson-2K0500/2K1000 has 64 device interrupt sources as inputs, so we
+    need to define two nodes in dts{i} to describe the "0-31" and "32-61" interrupt
+    sources respectively.
 
 allOf:
   - $ref: /schemas/interrupt-controller.yaml#
@@ -33,6 +38,7 @@ properties:
       - const: main
       - const: isr0
       - const: isr1
+    minItems: 2
 
   interrupt-controller: true
 
@@ -45,16 +51,14 @@ properties:
   interrupt-names:
     description: List of names for the parent interrupts.
     items:
-      - const: int0
-      - const: int1
-      - const: int2
-      - const: int3
+      pattern: int[0-3]
     minItems: 1
+    maxItems: 4
 
   '#interrupt-cells':
     const: 2
 
-  'loongson,parent_int_map':
+  loongson,parent_int_map:
     description: |
       This property points how the children interrupts will be mapped into CPU
       interrupt lines. Each cell refers to a parent interrupt line from 0 to 3
@@ -69,10 +73,10 @@ required:
   - compatible
   - reg
   - interrupts
+  - interrupt-names
   - interrupt-controller
   - '#interrupt-cells'
-  - 'loongson,parent_int_map'
-
+  - loongson,parent_int_map
 
 unevaluatedProperties: false
 
@@ -86,7 +90,8 @@ if:
 then:
   properties:
     reg:
-      minItems: 3
+      minItems: 2
+      maxItems: 3
 
   required:
     - reg-names
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
deleted file mode 100644
index a63ed9fcb535..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Loongson ls1x Interrupt Controller
-
-Required properties:
-
-- compatible : should be "loongson,ls1x-intc". Valid strings are:
-
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-- interrupts : Specifies the CPU interrupt the controller is connected to.
-
-Example:
-
-intc: interrupt-controller@1fd01040 {
-	compatible = "loongson,ls1x-intc";
-	reg = <0x1fd01040 0x18>;
-
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	interrupt-parent = <&cpu_intc>;
-	interrupts = <2>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
new file mode 100644
index 000000000000..c60125fb1cbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,ls1x-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 Interrupt Controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+  Loongson-1 interrupt controller is connected to the MIPS core interrupt
+  controller, which controls several groups of interrupts.
+
+properties:
+  compatible:
+    const: loongson,ls1x-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    intc0: interrupt-controller@1fd01040 {
+        compatible = "loongson,ls1x-intc";
+        reg = <0x1fd01040 0x18>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&cpu_intc>;
+        interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
index 1f6fd73d4624..a71fc2218ede 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/loongson,pch-msi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,pch-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Loongson PCH MSI Controller
 
@@ -25,7 +25,7 @@ properties:
     description:
       u32 value of the base of parent HyperTransport vector allocated
       to PCH MSI.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 255
 
@@ -33,7 +33,7 @@ properties:
     description:
       u32 value of the number of parent HyperTransport vectors allocated
       to PCH MSI.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 1
     maximum: 256
 
@@ -46,7 +46,7 @@ required:
   - loongson,msi-base-vec
   - loongson,msi-num-vecs
 
-additionalProperties: true #fixme
+additionalProperties: true # fixme
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
index fdd6a38a31db..b7bc5cb1dff2 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/loongson,pch-pic.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,pch-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Loongson PCH PIC Controller
 
@@ -25,7 +25,7 @@ properties:
     description:
       u32 value of the base of parent HyperTransport vector allocated
       to PCH PIC.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 192
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
deleted file mode 100644
index aee38e7c13e7..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-TI-NSPIRE interrupt controller
-
-Required properties:
-- compatible: Compatible property value should be "lsi,zevio-intc".
-
-- reg: Physical base address of the controller and length of memory mapped
-	region.
-
-- interrupt-controller : Identifies the node as an interrupt controller
-
-Example:
-
-interrupt-controller {
-	compatible = "lsi,zevio-intc";
-	interrupt-controller;
-	reg = <0xDC000000 0x1000>;
-	#interrupt-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.yaml
new file mode 100644
index 000000000000..e66b25f579c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2025 Daniel Tang <dt.tangr@gmail.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/lsi,zevio-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI-NSPIRE Interrupt Controller
+
+maintainers:
+  - Daniel Tang <dt.tangr@gmail.com>
+
+description: |
+  TI-NSPIRE interrupt controller
+
+properties:
+  compatible:
+    const: lsi,zevio-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@dc000000 {
+        compatible = "lsi,zevio-intc";
+        interrupt-controller;
+        reg = <0xdc000000 0x1000>;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-gicp.yaml b/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-gicp.yaml
new file mode 100644
index 000000000000..5faedd95b9a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-gicp.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,ap806-gicp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell GICP Controller
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+
+description:
+  GICP is a Marvell extension of the GIC that allows to trigger GIC SPI
+  interrupts by doing a memory transaction. It is used by the ICU
+  located in the Marvell CP110 to turn wired interrupts inside the CP
+  into GIC SPI interrupts.
+
+properties:
+  compatible:
+    const: marvell,ap806-gicp
+
+  reg:
+    maxItems: 1
+
+  marvell,spi-ranges:
+    description: Tuples of GIC SPI interrupt ranges available for this GICP
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: SPI interrupt base
+        - description: Number of interrupts in the range
+
+  msi-controller: true
+
+required:
+  - compatible
+  - reg
+  - msi-controller
+  - marvell,spi-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    msi-controller@3f0040 {
+        compatible = "marvell,ap806-gicp";
+        reg = <0x3f0040 0x10>;
+        marvell,spi-ranges = <64 64>, <288 64>;
+        msi-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-sei.yaml b/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-sei.yaml
new file mode 100644
index 000000000000..e812f9a86307
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,ap806-sei.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,ap806-sei.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell SEI (System Error Interrupt) Controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: >
+  Marvell SEI (System Error Interrupt) controller is an interrupt aggregator. It
+  receives interrupts from several sources and aggregates them to a single
+  interrupt line (an SPI) on the parent interrupt controller.
+
+  This interrupt controller can handle up to 64 SEIs, a set comes from the AP
+  and is wired while a second set comes from the CPs by the mean of MSIs.
+
+properties:
+  compatible:
+    const: marvell,ap806-sei
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  msi-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+  - msi-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@3f0200 {
+        compatible = "marvell,ap806-sei";
+        reg = <0x3f0200 0x40>;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        msi-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
deleted file mode 100644
index 5fc03134a999..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-370-xp-mpic.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Marvell Armada 370, 375, 38x, XP Interrupt Controller
------------------------------------------------------
-
-Required properties:
-- compatible: Should be "marvell,mpic"
-- interrupt-controller: Identifies the node as an interrupt controller.
-- msi-controller: Identifies the node as an PCI Message Signaled
-  Interrupt controller.
-- #interrupt-cells: The number of cells to define the interrupts. Should be 1.
-  The cell is the IRQ number
-
-- reg: Should contain PMIC registers location and length. First pair
-  for the main interrupt registers, second pair for the per-CPU
-  interrupt registers. For this last pair, to be compliant with SMP
-  support, the "virtual" must be use (For the record, these registers
-  automatically map to the interrupt controller registers of the
-  current CPU)
-
-Optional properties:
-
-- interrupts: If defined, then it indicates that this MPIC is
-  connected as a slave to another interrupt controller. This is
-  typically the case on Armada 375 and Armada 38x, where the MPIC is
-  connected as a slave to the Cortex-A9 GIC. The provided interrupt
-  indicate to which GIC interrupt the MPIC output is connected.
-
-Example:
-
-        mpic: interrupt-controller@d0020000 {
-              compatible = "marvell,mpic";
-              #interrupt-cells = <1>;
-              #address-cells = <1>;
-              #size-cells = <1>;
-              interrupt-controller;
-              msi-controller;
-              reg = <0xd0020a00 0x1d0>,
-                    <0xd0021070 0x58>;
-        };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt
deleted file mode 100644
index 86a7b4cd03f5..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Marvell Armada 7K/8K PIC Interrupt controller
----------------------------------------------
-
-This is the Device Tree binding for the PIC, a secondary interrupt
-controller available on the Marvell Armada 7K/8K ARM64 SoCs, and
-typically connected to the GIC as the primary interrupt controller.
-
-Required properties:
-- compatible: should be "marvell,armada-8k-pic"
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: the number of cells to define interrupts on this
-  controller. Should be 1
-- reg: the register area for the PIC interrupt controller
-- interrupts: the interrupt to the primary interrupt controller,
-  typically the GIC
-
-Example:
-
-	pic: interrupt-controller@3f0100 {
-		compatible = "marvell,armada-8k-pic";
-		reg = <0x3f0100 0x10>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.yaml
new file mode 100644
index 000000000000..5a455f7353db
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,armada-8k-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 7K/8K PIC Interrupt controller
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+
+description:
+  The Marvell Armada 7K/8K PIC is a secondary interrupt controller available on
+  the Marvell Armada 7K/8K ARM64 SoCs, and typically connected to the GIC as the
+  primary interrupt controller.
+
+properties:
+  compatible:
+    const: marvell,armada-8k-pic
+
+  reg:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt to the primary interrupt controller (GIC).
+
+required:
+  - compatible
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@3f0100 {
+        compatible = "marvell,armada-8k-pic";
+        reg = <0x3f0100 0x10>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+        interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml b/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml
new file mode 100644
index 000000000000..ddfce217e119
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,cp110-icu.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,cp110-icu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+  - Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+
+title: Marvell ICU Interrupt Controller
+
+description:
+  The Marvell ICU (Interrupt Consolidation Unit) controller is responsible for
+  collecting all wired-interrupt sources in the CP and communicating them to the
+  GIC in the AP. The unit translates interrupt requests on input wires to MSG
+  memory mapped transactions to the GIC. These messages access different GIC
+  memory areas depending on their type (NSR, SR, SEI, REI, etc).
+
+properties:
+  compatible:
+    const: marvell,cp110-icu
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^interrupt-controller@":
+    type: object
+    description: Interrupt group child nodes
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - marvell,cp110-icu-nsr
+          - marvell,cp110-icu-sr
+          - marvell,cp110-icu-sei
+          - marvell,cp110-icu-rei
+
+      reg:
+        maxItems: 1
+
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 2
+
+      interrupt-controller: true
+
+      msi-parent:
+        maxItems: 1
+        description: Phandle to the GICP controller
+
+    required:
+      - compatible
+      - reg
+      - '#interrupt-cells'
+      - interrupt-controller
+      - msi-parent
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@1e0000 {
+        compatible = "marvell,cp110-icu";
+        reg = <0x1e0000 0x440>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        interrupt-controller@10 {
+                compatible = "marvell,cp110-icu-nsr";
+                reg = <0x10 0x20>;
+                #interrupt-cells = <2>;
+                interrupt-controller;
+                msi-parent = <&gicp>;
+        };
+
+        interrupt-controller@50 {
+                compatible = "marvell,cp110-icu-sei";
+                reg = <0x50 0x10>;
+                #interrupt-cells = <2>;
+                interrupt-controller;
+                msi-parent = <&sei>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
deleted file mode 100644
index 64a00ceb7da4..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,gicp.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Marvell GICP Controller
------------------------
-
-GICP is a Marvell extension of the GIC that allows to trigger GIC SPI
-interrupts by doing a memory transaction. It is used by the ICU
-located in the Marvell CP110 to turn wired interrupts inside the CP
-into GIC SPI interrupts.
-
-Required properties:
-
-- compatible: Must be "marvell,ap806-gicp"
-
-- reg: Must be the address and size of the GICP SPI registers
-
-- marvell,spi-ranges: tuples of GIC SPI interrupts ranges available
-  for this GICP
-
-- msi-controller: indicates that this is an MSI controller
-
-Example:
-
-gicp_spi: gicp-spi@3f0040 {
-	compatible = "marvell,ap806-gicp";
-	reg = <0x3f0040 0x10>;
-	marvell,spi-ranges = <64 64>, <288 64>;
-	msi-controller;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
deleted file mode 100644
index 1c94a57a661e..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,icu.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Marvell ICU Interrupt Controller
---------------------------------
-
-The Marvell ICU (Interrupt Consolidation Unit) controller is
-responsible for collecting all wired-interrupt sources in the CP and
-communicating them to the GIC in the AP, the unit translates interrupt
-requests on input wires to MSG memory mapped transactions to the GIC.
-These messages will access a different GIC memory area depending on
-their type (NSR, SR, SEI, REI, etc).
-
-Required properties:
-
-- compatible: Should be "marvell,cp110-icu"
-
-- reg: Should contain ICU registers location and length.
-
-Subnodes: Each group of interrupt is declared as a subnode of the ICU,
-with their own compatible.
-
-Required properties for the icu_nsr/icu_sei subnodes:
-
-- compatible: Should be one of:
-              * "marvell,cp110-icu-nsr"
-	      * "marvell,cp110-icu-sr"
-	      * "marvell,cp110-icu-sei"
-	      * "marvell,cp110-icu-rei"
-
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-
-  The 1st cell is the index of the interrupt in the ICU unit.
-
-  The 2nd cell is the type of the interrupt. See arm,gic.txt for
-  details.
-
-- interrupt-controller: Identifies the node as an interrupt
-  controller.
-
-- msi-parent: Should point to the GICP controller, the GIC extension
-  that allows to trigger interrupts using MSG memory mapped
-  transactions.
-
-Note: each 'interrupts' property referring to any 'icu_xxx' node shall
-      have a different number within [0:206].
-
-Example:
-
-icu: interrupt-controller@1e0000 {
-	compatible = "marvell,cp110-icu";
-	reg = <0x1e0000 0x440>;
-
-	CP110_LABEL(icu_nsr): interrupt-controller@10 {
-		compatible = "marvell,cp110-icu-nsr";
-		reg = <0x10 0x20>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		msi-parent = <&gicp>;
-	};
-
-	CP110_LABEL(icu_sei): interrupt-controller@50 {
-		compatible = "marvell,cp110-icu-sei";
-		reg = <0x50 0x10>;
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		msi-parent = <&sei>;
-	};
-};
-
-node1 {
-	interrupt-parent = <&icu_nsr>;
-	interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-node2 {
-	interrupt-parent = <&icu_sei>;
-	interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-/* Would not work with the above nodes */
-node3 {
-	interrupt-parent = <&icu_nsr>;
-	interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-The legacy bindings were different in this way:
-
-- #interrupt-cells: The value was 3.
-	The 1st cell was the group type of the ICU interrupt. Possible
-	group types were:
-	ICU_GRP_NSR (0x0) : Shared peripheral interrupt, non-secure
-	ICU_GRP_SR  (0x1) : Shared peripheral interrupt, secure
-	ICU_GRP_SEI (0x4) : System error interrupt
-	ICU_GRP_REI (0x5) : RAM error interrupt
-	The 2nd cell was the index of the interrupt in the ICU unit.
-	The 3rd cell was the type of the interrupt. See arm,gic.txt for
-	details.
-
-Example:
-
-icu: interrupt-controller@1e0000 {
-	compatible = "marvell,cp110-icu";
-	reg = <0x1e0000 0x440>;
-
-	#interrupt-cells = <3>;
-	interrupt-controller;
-	msi-parent = <&gicp>;
-};
-
-node1 {
-	interrupt-parent = <&icu>;
-	interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml
new file mode 100644
index 000000000000..616a41c87352
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,mpic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 370, 375, 38x, 39x, XP Interrupt Controller
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+description: |
+  The top-level interrupt controller on Marvell Armada 370 and XP. On these
+  platforms it also provides inter-processor interrupts.
+
+  On Marvell Armada 375, 38x and 39x this controller is wired under ARM GIC.
+
+  Provides MSI handling for the PCIe controllers.
+
+properties:
+  compatible:
+    const: marvell,mpic
+
+  reg:
+    items:
+      - description: main registers
+      - description: per-cpu registers
+
+  interrupts:
+    items:
+      - description: |
+          Parent interrupt on platforms where MPIC is not the top-level
+          interrupt controller.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  msi-controller: true
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - msi-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    interrupt-controller@20a00 {
+        compatible = "marvell,mpic";
+        reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+        interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        msi-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
deleted file mode 100644
index 0ebfc952cb34..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-
-* Marvell ODMI for MSI support
-
-Some Marvell SoCs have an On-Die Message Interrupt (ODMI) controller
-which can be used by on-board peripheral for MSI interrupts.
-
-Required properties:
-
-- compatible           : The value here should contain:
-
-    "marvell,ap806-odmi-controller", "marvell,odmi-controller".
-
-- interrupt,controller : Identifies the node as an interrupt controller.
-
-- msi-controller       : Identifies the node as an MSI controller.
-
-- marvell,odmi-frames  : Number of ODMI frames available. Each frame
-                         provides a number of events.
-
-- reg                  : List of register definitions, one for each
-                         ODMI frame.
-
-- marvell,spi-base     : List of GIC base SPI interrupts, one for each
-                         ODMI frame. Those SPI interrupts are 0-based,
-                         i.e marvell,spi-base = <128> will use SPI #96.
-                         See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
-                         for details about the GIC Device Tree binding.
-
-Example:
-
-	odmi: odmi@300000 {
-		compatible = "marvell,ap806-odmi-controller",
-			     "marvell,odmi-controller";
-		interrupt-controller;
-		msi-controller;
-		marvell,odmi-frames = <4>;
-		reg = <0x300000 0x4000>,
-		      <0x304000 0x4000>,
-		      <0x308000 0x4000>,
-		      <0x30C000 0x4000>;
-		marvell,spi-base = <128>, <136>, <144>, <152>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.yaml
new file mode 100644
index 000000000000..9ec1ed4a5155
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,odmi-controller.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,odmi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell ODMI controller
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+description:
+  Some Marvell SoCs have an On-Die Message Interrupt (ODMI) controller which can
+  be used by on-board peripherals for MSI interrupts.
+
+properties:
+  compatible:
+    const: marvell,odmi-controller
+
+  reg:
+    description: List of register definitions, one for each ODMI frame.
+
+  msi-controller: true
+
+  marvell,odmi-frames:
+    description: Number of ODMI frames available. Each frame provides a number of events.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  marvell,spi-base:
+    description: >
+      List of GIC base SPI interrupts, one for each ODMI frame. Those SPI
+      interrupts are 0-based, i.e. marvell,spi-base = <128> will use SPI #96.
+      See Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+      for details.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+  - compatible
+  - reg
+  - msi-controller
+  - marvell,odmi-frames
+  - marvell,spi-base
+
+additionalProperties: false
+
+examples:
+  - |
+    msi-controller@300000 {
+        compatible = "marvell,odmi-controller";
+        msi-controller;
+        marvell,odmi-frames = <4>;
+        reg = <0x300000 0x4000>, <0x304000 0x4000>, <0x308000 0x4000>, <0x30C000 0x4000>;
+        marvell,spi-base = <128>, <136>, <144>, <152>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-bridge-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-bridge-intc.yaml
new file mode 100644
index 000000000000..e1310ec65382
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-bridge-intc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/interrupt-controller/marvell,orion-bridge-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Orion SoC Bridge Interrupt Controller
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
+
+properties:
+  compatible:
+    const: marvell,orion-bridge-intc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupts:
+    description: Bridge interrupt of the main interrupt controller
+
+  marvell,#interrupts:
+    description: Number of interrupts provided by bridge interrupt controller.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 32
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@20110 {
+        compatible = "marvell,orion-bridge-intc";
+        reg = <0x20110 0x8>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <0>;
+        /* Dove bridge provides 5 interrupts */
+        marvell,#interrupts = <5>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt
deleted file mode 100644
index 2c11ac76fac9..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,orion-intc.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Marvell Orion SoC interrupt controllers
-
-* Main interrupt controller
-
-Required properties:
-- compatible: shall be "marvell,orion-intc"
-- reg: base address(es) of interrupt registers starting with CAUSE register
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
-
-The interrupt sources map to the corresponding bits in the interrupt
-registers, i.e.
-- 0 maps to bit 0 of first base address,
-- 1 maps to bit 1 of first base address,
-- 32 maps to bit 0 of second base address, and so on.
-
-Example:
-	intc: interrupt-controller {
-		compatible = "marvell,orion-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		 /* Dove has 64 first level interrupts */
-		reg = <0x20200 0x10>, <0x20210 0x10>;
-	};
-
-* Bridge interrupt controller
-
-Required properties:
-- compatible: shall be "marvell,orion-bridge-intc"
-- reg: base address of bridge interrupt registers starting with CAUSE register
-- interrupts: bridge interrupt of the main interrupt controller
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
-
-Optional properties:
-- marvell,#interrupts: number of interrupts provided by bridge interrupt
-      controller, defaults to 32 if not set
-
-Example:
-	bridge_intc: interrupt-controller {
-		compatible = "marvell,orion-bridge-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x20110 0x8>;
-		interrupts = <0>;
-		/* Dove bridge provides 5 interrupts */
-		marvell,#interrupts = <5>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt b/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
deleted file mode 100644
index 0beafed502f5..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/marvell,sei.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Marvell SEI (System Error Interrupt) Controller
------------------------------------------------
-
-Marvell SEI (System Error Interrupt) controller is an interrupt
-aggregator. It receives interrupts from several sources and aggregates
-them to a single interrupt line (an SPI) on the parent interrupt
-controller.
-
-This interrupt controller can handle up to 64 SEIs, a set comes from the
-AP and is wired while a second set comes from the CPs by the mean of
-MSIs.
-
-Required properties:
-
-- compatible: should be one of:
-              * "marvell,ap806-sei"
-- reg: SEI registers location and length.
-- interrupts: identifies the parent IRQ that will be triggered.
-- #interrupt-cells: number of cells to define an SEI wired interrupt
-                    coming from the AP, should be 1. The cell is the IRQ
-                    number.
-- interrupt-controller: identifies the node as an interrupt controller
-                        for AP interrupts.
-- msi-controller: identifies the node as an MSI controller for the CPs
-                  interrupts.
-
-Example:
-
-        sei: interrupt-controller@3f0200 {
-                compatible = "marvell,ap806-sei";
-                reg = <0x3f0200 0x40>;
-                interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-                #interrupt-cells = <1>;
-                interrupt-controller;
-                msi-controller;
-        };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
deleted file mode 100644
index 5865f4f2c69d..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Mediatek 27xx cirq
-
-In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to
-work outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC.
-The external interrupts (outside MCUSYS) will feed through CIRQ and connect
-to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
-interrupts and generate a pulse signal to parent interrupt controller when
-flush command is executed. With CIRQ, MCUSYS can be completely turned off
-to improve the system power consumption without losing interrupts.
-
-Required properties:
-- compatible: should be one of
-  - "mediatek,mt2701-cirq" for mt2701 CIRQ
-  - "mediatek,mt8135-cirq" for mt8135 CIRQ
-  - "mediatek,mt8173-cirq" for mt8173 CIRQ
-  and "mediatek,cirq" as a fallback.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- reg: Physical base address of the cirq registers and length of memory
-  mapped region.
-- mediatek,ext-irq-range: Identifies external irq number range in different
-  SOCs.
-
-Example:
-	cirq: interrupt-controller@10204000 {
-		compatible = "mediatek,mt2701-cirq",
-			     "mediatek,mtk-cirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&sysirq>;
-		reg = <0 0x10204000 0 0x400>;
-		mediatek,ext-irq-start = <32 200>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
new file mode 100644
index 000000000000..30d76692ca87
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mt6577-sysirq.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mt6577-sysirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek sysirq
+
+description:
+  MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
+  interrupt.
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6577-sysirq
+      - items:
+          - enum:
+              - mediatek,mt2701-sysirq
+              - mediatek,mt2712-sysirq
+              - mediatek,mt6572-sysirq
+              - mediatek,mt6580-sysirq
+              - mediatek,mt6582-sysirq
+              - mediatek,mt6589-sysirq
+              - mediatek,mt6592-sysirq
+              - mediatek,mt6755-sysirq
+              - mediatek,mt6765-sysirq
+              - mediatek,mt6779-sysirq
+              - mediatek,mt6795-sysirq
+              - mediatek,mt6797-sysirq
+              - mediatek,mt7622-sysirq
+              - mediatek,mt7623-sysirq
+              - mediatek,mt7629-sysirq
+              - mediatek,mt8127-sysirq
+              - mediatek,mt8135-sysirq
+              - mediatek,mt8173-sysirq
+              - mediatek,mt8183-sysirq
+              - mediatek,mt8365-sysirq
+              - mediatek,mt8516-sysirq
+          - const: mediatek,mt6577-sysirq
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    $ref: arm,gic.yaml#/properties/#interrupt-cells
+
+required:
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt6797-sysirq
+    then:
+      properties:
+        reg:
+          minItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@10200620 {
+        compatible = "mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq";
+        reg = <0x10220620 0x20>,
+              <0x10220690 0x10>;
+        interrupt-parent = <&gic>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
new file mode 100644
index 000000000000..20dfffb34f0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mtk-cirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Interrupt Controller
+
+maintainers:
+  - Youlin Pei <youlin.pei@mediatek.com>
+
+description:
+  In MediaTek SoCs, the CIRQ is a low power interrupt controller designed to
+  work outside of MCUSYS which comprises with Cortex-Ax cores, CCI and GIC.
+  The external interrupts (outside MCUSYS) will feed through CIRQ and connect
+  to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
+  interrupts and generate a pulse signal to parent interrupt controller when
+  flush command is executed. With CIRQ, MCUSYS can be completely turned off
+  to improve the system power consumption without losing interrupts.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-cirq
+          - mediatek,mt8135-cirq
+          - mediatek,mt8173-cirq
+          - mediatek,mt8192-cirq
+      - const: mediatek,mtk-cirq
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 3
+
+  interrupt-controller: true
+
+  mediatek,ext-irq-range:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: First CIRQ interrupt
+      - description: Last CIRQ interrupt
+    description:
+      Identifies the range of external interrupts in different SoCs
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - mediatek,ext-irq-range
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    cirq: interrupt-controller@10204000 {
+        compatible = "mediatek,mt2701-cirq", "mediatek,mtk-cirq";
+        reg = <0x10204000 0x400>;
+        #interrupt-cells = <3>;
+        interrupt-controller;
+        interrupt-parent = <&sysirq>;
+        mediatek,ext-irq-range = <32 200>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
deleted file mode 100644
index 84ced3f4179b..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-MediaTek sysirq
-
-MediaTek SOCs sysirq support controllable irq inverter for each GIC SPI
-interrupt.
-
-Required properties:
-- compatible: should be
-	"mediatek,mt8516-sysirq", "mediatek,mt6577-sysirq": for MT8516
-	"mediatek,mt8183-sysirq", "mediatek,mt6577-sysirq": for MT8183
-	"mediatek,mt8173-sysirq", "mediatek,mt6577-sysirq": for MT8173
-	"mediatek,mt8135-sysirq", "mediatek,mt6577-sysirq": for MT8135
-	"mediatek,mt8127-sysirq", "mediatek,mt6577-sysirq": for MT8127
-	"mediatek,mt7622-sysirq", "mediatek,mt6577-sysirq": for MT7622
-	"mediatek,mt7623-sysirq", "mediatek,mt6577-sysirq": for MT7623
-	"mediatek,mt7629-sysirq", "mediatek,mt6577-sysirq": for MT7629
-	"mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq": for MT6795
-	"mediatek,mt6797-sysirq", "mediatek,mt6577-sysirq": for MT6797
-	"mediatek,mt6779-sysirq", "mediatek,mt6577-sysirq": for MT6779
-	"mediatek,mt6765-sysirq", "mediatek,mt6577-sysirq": for MT6765
-	"mediatek,mt6755-sysirq", "mediatek,mt6577-sysirq": for MT6755
-	"mediatek,mt6592-sysirq", "mediatek,mt6577-sysirq": for MT6592
-	"mediatek,mt6589-sysirq", "mediatek,mt6577-sysirq": for MT6589
-	"mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq": for MT6582
-	"mediatek,mt6580-sysirq", "mediatek,mt6577-sysirq": for MT6580
-	"mediatek,mt6577-sysirq": for MT6577
-	"mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712
-	"mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- reg: Physical base address of the intpol registers and length of memory
-  mapped region. Could be multiple bases here. Ex: mt6797 needs 2 reg, others
-  need 1.
-
-Example:
-	sysirq: intpol-controller@10200620 {
-		compatible = "mediatek,mt6797-sysirq",
-			     "mediatek,mt6577-sysirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-		reg = <0 0x10220620 0 0x20>,
-		      <0 0x10220690 0 0x10>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml
deleted file mode 100644
index 50003880ee6f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml
+++ /dev/null
@@ -1,73 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/interrupt-controller/microchip,eic.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Microchip External Interrupt Controller
-
-maintainers:
-  - Claudiu Beznea <claudiu.beznea@microchip.com>
-
-description:
-  This interrupt controller is found in Microchip SoCs (SAMA7G5) and provides
-  support for handling up to 2 external interrupt lines.
-
-properties:
-  compatible:
-    enum:
-      - microchip,sama7g5-eic
-
-  reg:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  '#interrupt-cells':
-    const: 2
-    description:
-      The first cell is the input IRQ number (between 0 and 1), the second cell
-      is the trigger type as defined in interrupt.txt present in this directory.
-
-  interrupts:
-    description: |
-      Contains the GIC SPI IRQs mapped to the external interrupt lines. They
-      should be specified sequentially from output 0 to output 1.
-    minItems: 2
-    maxItems: 2
-
-  clocks:
-    maxItems: 1
-
-  clock-names:
-    const: pclk
-
-required:
-  - compatible
-  - reg
-  - interrupt-controller
-  - '#interrupt-cells'
-  - interrupts
-  - clocks
-  - clock-names
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/at91.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-    eic: interrupt-controller@e1628000 {
-      compatible = "microchip,sama7g5-eic";
-      reg = <0xe1628000 0x100>;
-      interrupt-parent = <&gic>;
-      interrupt-controller;
-      #interrupt-cells = <2>;
-      interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-      clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
-      clock-names = "pclk";
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,lan966x-oic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,lan966x-oic.yaml
new file mode 100644
index 000000000000..dca16e202da9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,lan966x-oic.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,lan966x-oic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966x outband interrupt controller
+
+maintainers:
+  - Herve Codina <herve.codina@bootlin.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+  The Microchip LAN966x outband interrupt controller (OIC) maps the internal
+  interrupt sources of the LAN966x device to a PCI interrupt when the LAN966x
+  device is used as a PCI device.
+
+properties:
+  compatible:
+    const: microchip,lan966x-oic
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@e00c0120 {
+        compatible = "microchip,lan966x-oic";
+        reg = <0xe00c0120 0x190>;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+        interrupts = <0>;
+        interrupt-parent = <&intc>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
deleted file mode 100644
index c3a1b37c4c35..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Microchip PIC32 Interrupt Controller
-====================================
-
-The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC).
-It handles all internal and external interrupts. This controller exists outside
-of the CPU and is the arbitrator of all interrupts (including interrupts from
-the CPU itself) before they are presented to the CPU.
-
-External interrupts have a software configurable edge polarity. Non external
-interrupts have a type and polarity that is determined by the source of the
-interrupt.
-
-Required properties
--------------------
-
-- compatible: Should be "microchip,pic32mzda-evic"
-- reg: Specifies physical base address and size of register range.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt cells: Specifies the number of cells used to encode an interrupt
-  source connected to this controller. The value shall be 2 and interrupt
-  descriptor shall have the following format:
-
-	<hw_irq irq_type>
-
-  hw_irq - represents the hardware interrupt number as in the data sheet.
-  irq_type - is used to describe the type and polarity of an interrupt. For
-  internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and
-  IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use
-  IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity.
-
-Optional properties
--------------------
-- microchip,external-irqs: u32 array of external interrupts with software
-  polarity configuration. This array corresponds to the bits in the INTCON
-  SFR.
-
-Example
--------
-
-evic: interrupt-controller@1f810000 {
-	compatible = "microchip,pic32mzda-evic";
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	reg = <0x1f810000 0x1000>;
-	microchip,external-irqs = <3 8 13 18 23>;
-};
-
-Each device/peripheral must request its interrupt line with the associated type
-and polarity.
-
-Internal interrupt DTS snippet
-------------------------------
-
-device@1f800000 {
-	...
-	interrupts = <113 IRQ_TYPE_LEVEL_HIGH>;
-	...
-};
-
-External interrupt DTS snippet
-------------------------------
-
-device@1f800000 {
-	...
-	interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-	...
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32mzda-evic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32mzda-evic.yaml
new file mode 100644
index 000000000000..74bfc42693f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32mzda-evic.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,pic32mzda-evic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIC32 EVIC Interrupt Controller
+
+maintainers:
+  - Cristian Birsan <cristian.birsan@microchip.com>
+
+description: >
+  The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC).
+  It handles all internal and external interrupts. This controller exists
+  outside of the CPU and is the arbitrator of all interrupts (including
+  interrupts from the CPU itself) before they are presented to the CPU.
+
+  External interrupts have a software configurable edge polarity. Non external
+  interrupts have a type and polarity that is determined by the source of the
+  interrupt.
+
+properties:
+  compatible:
+    items:
+      - const: microchip,pic32mzda-evic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  microchip,external-irqs:
+    description:
+      External interrupts with software polarity configuration corresponding to
+      the INTCON SFR bits.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+      interrupt-controller@1f810000 {
+          compatible = "microchip,pic32mzda-evic";
+          reg = <0x1f810000 0x1000>;
+          interrupt-controller;
+          #interrupt-cells = <2>;
+          microchip,external-irqs = <3 8 13 18 23>;
+      };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml
new file mode 100644
index 000000000000..d56ba65b17d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,sama7g5-eic.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,sama7g5-eic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip External Interrupt Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  This interrupt controller is found in Microchip SoCs (SAMA7G5) and provides
+  support for handling up to 2 external interrupt lines.
+
+properties:
+  compatible:
+    enum:
+      - microchip,sama7g5-eic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the input IRQ number (between 0 and 1), the second cell
+      is the trigger type as defined in interrupt.txt present in this directory.
+
+  interrupts:
+    description: |
+      Contains the GIC SPI IRQs mapped to the external interrupt lines. They
+      should be specified sequentially from output 0 to output 1.
+    minItems: 2
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    eic: interrupt-controller@e1628000 {
+      compatible = "microchip,sama7g5-eic";
+      reg = <0xe1628000 0x100>;
+      interrupt-parent = <&gic>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+      clock-names = "pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
index 372ccbfae771..b7c5022eec84 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
@@ -4,13 +4,11 @@
 $id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MMP/Orion Interrupt controller bindings
+title: Marvell MMP/Orion Interrupt controller
 
 maintainers:
-  - Thomas Gleixner <tglx@linutronix.de>
-  - Jason Cooper <jason@lakedaemon.net>
-  - Marc Zyngier <maz@kernel.org>
-  - Rob Herring <robh+dt@kernel.org>
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
 
 allOf:
   - if:
@@ -55,8 +53,8 @@ allOf:
           maxItems: 1
         reg-names:
           items:
-            - const: 'mux status'
-            - const: 'mux mask'
+            - const: mux status
+            - const: mux mask
       required:
         - interrupts
     else:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
index 27b798bfe29b..d943ea820cdd 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/mscc,ocelot-icpu-intr.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/mscc,ocelot-icpu-intr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Microsemi Ocelot SoC ICPU Interrupt Controller
 
@@ -26,7 +26,6 @@ properties:
           - mscc,ocelot-icpu-intr
           - mscc,serval-icpu-intr
 
-
   '#interrupt-cells':
     const: 1
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
new file mode 100644
index 000000000000..46a1f5f54b74
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,cpu-interrupt-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS CPU Interrupt Controller
+
+description: >
+   On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
+   IRQs from a devicetree file and create a irq_domain for IRQ controller.
+
+   With the irq_domain in place we can describe how the 8 IRQs are wired to the
+   platforms internal interrupt controller cascade.
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+properties:
+  compatible:
+    const: mti,cpu-interrupt-controller
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    interrupt-controller {
+      compatible = "mti,cpu-interrupt-controller";
+      #address-cells = <0>;
+      #interrupt-cells = <1>;
+      interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
index 9ce6804bdb99..2d6307a383ad 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/nuvoton,wpcm450-aic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Nuvoton WPCM450 Advanced Interrupt Controller bindings
+title: Nuvoton WPCM450 Advanced Interrupt Controller
 
 maintainers:
   - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
deleted file mode 100644
index 2ff356640100..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-NVIDIA Legacy Interrupt Controller
-
-All Tegra SoCs contain a legacy interrupt controller that routes
-interrupts to the GIC, and also serves as a wakeup source. It is also
-referred to as "ictlr", hence the name of the binding.
-
-The HW block exposes a number of interrupt controllers, each
-implementing a set of 32 interrupts.
-
-Required properties:
-
-- compatible : should be: "nvidia,tegra<chip>-ictlr". The LIC on
-  subsequent SoCs remained backwards-compatible with Tegra30, so on
-  Tegra generations later than Tegra30 the compatible value should
-  include "nvidia,tegra30-ictlr".	
-- reg : Specifies base physical address and size of the registers.
-  Each controller must be described separately (Tegra20 has 4 of them,
-  whereas Tegra30 and later have 5).
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value must be 3.
-
-Notes:
-
-- Because this HW ultimately routes interrupts to the GIC, the
-  interrupt specifier must be that of the GIC.
-- Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs
-  are explicitly forbidden.
-
-Example:
-
-	ictlr: interrupt-controller@60004000 {
-		compatible = "nvidia,tegra20-ictlr", "nvidia,tegra-ictlr";
-		reg = <0x60004000 64>,
-		      <0x60004100 64>,
-		      <0x60004200 64>,
-		      <0x60004300 64>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&intc>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.yaml b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.yaml
new file mode 100644
index 000000000000..074a873880e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/nvidia,tegra20-ictlr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 Legacy Interrupt Controller
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jonathan Hunter <jonathanh@nvidia.com>
+
+description: >
+  All Tegra SoCs contain a legacy interrupt controller that routes interrupts to
+  the GIC, and also serves as a wakeup source. It is also referred to as
+  "ictlr", hence the name of the binding.
+
+  The HW block exposes a number of interrupt controllers, each implementing a
+  set of 32 interrupts.
+
+  Notes:
+    - Because this HW ultimately routes interrupts to the GIC, the
+      interrupt specifier must be that of the GIC.
+    - Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs
+      are explicitly forbidden.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra114-ictlr
+              - nvidia,tegra124-ictlr
+          - const: nvidia,tegra30-ictlr
+      - enum:
+          - nvidia,tegra20-ictlr
+          - nvidia,tegra30-ictlr
+
+  reg:
+    description: Each entry is a block of 32 interrupts
+    minItems: 4
+    maxItems: 5
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra20-ictlr
+    then:
+      properties:
+        reg:
+          maxItems: 4
+    else:
+      properties:
+        reg:
+          minItems: 5
+
+examples:
+  - |
+    interrupt-controller@60004000 {
+        compatible = "nvidia,tegra20-ictlr";
+        reg = <0x60004000 64>,
+              <0x60004100 64>,
+              <0x60004200 64>,
+              <0x60004300 64>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
deleted file mode 100644
index 0bfb3ba55f4c..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* NXP LPC32xx MIC, SIC1 and SIC2 Interrupt Controllers
-
-Required properties:
-- compatible: "nxp,lpc3220-mic" or "nxp,lpc3220-sic".
-- reg: should contain IC registers location and length.
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: the number of cells to define an interrupt, should be 2.
-  The first cell is the IRQ number, the second cell is used to specify
-  one of the supported IRQ types:
-      IRQ_TYPE_EDGE_RISING = low-to-high edge triggered,
-      IRQ_TYPE_EDGE_FALLING = high-to-low edge triggered,
-      IRQ_TYPE_LEVEL_HIGH = active high level-sensitive,
-      IRQ_TYPE_LEVEL_LOW = active low level-sensitive.
-  Reset value is IRQ_TYPE_LEVEL_LOW.
-
-Optional properties:
-- interrupts: empty for MIC interrupt controller, cascaded MIC
-  hardware interrupts for SIC1 and SIC2
-
-Examples:
-
-	/* LPC32xx MIC, SIC1 and SIC2 interrupt controllers */
-	mic: interrupt-controller@40008000 {
-		compatible = "nxp,lpc3220-mic";
-		reg = <0x40008000 0x4000>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sic1: interrupt-controller@4000c000 {
-		compatible = "nxp,lpc3220-sic";
-		reg = <0x4000c000 0x4000>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		interrupt-parent = <&mic>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
-			     <30 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	sic2: interrupt-controller@40010000 {
-		compatible = "nxp,lpc3220-sic";
-		reg = <0x40010000 0x4000>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		interrupt-parent = <&mic>;
-		interrupts = <1 IRQ_TYPE_LEVEL_LOW>,
-			     <31 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-	/* ADC */
-	adc@40048000 {
-		compatible = "nxp,lpc3220-adc";
-		reg = <0x40048000 0x1000>;
-		interrupt-parent = <&sic1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.yaml b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.yaml
new file mode 100644
index 000000000000..724c869e3c40
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/nxp,lpc3220-mic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC32xx MIC, SIC1 and SIC2 Interrupt Controllers
+
+maintainers:
+  - Vladimir Zapolskiy <vz@mleia.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,lpc3220-mic
+      - nxp,lpc3220-sic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    items:
+      - description: Regular interrupt request
+      - description: Fast interrupt request
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nxp,lpc3220-sic
+    then:
+      required:
+        - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mic: interrupt-controller@40008000 {
+        compatible = "nxp,lpc3220-mic";
+        reg = <0x40008000 0x4000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    interrupt-controller@4000c000 {
+        compatible = "nxp,lpc3220-sic";
+        reg = <0x4000c000 0x4000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&mic>;
+        interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
+                    <30 IRQ_TYPE_LEVEL_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt
deleted file mode 100644
index ccbbfdc53c72..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-* Open PIC Binding
-
-This binding specifies what properties must be available in the device tree
-representation of an Open PIC compliant interrupt controller.  This binding is
-based on the binding defined for Open PIC in [1] and is a superset of that
-binding.
-
-Required properties:
-
-  NOTE: Many of these descriptions were paraphrased here from [1] to aid
-        readability.
-
-    - compatible: Specifies the compatibility list for the PIC.  The type
-      shall be <string> and the value shall include "open-pic".
-
-    - reg: Specifies the base physical address(s) and size(s) of this
-      PIC's addressable register space.  The type shall be <prop-encoded-array>.
-
-    - interrupt-controller: The presence of this property identifies the node
-      as an Open PIC.  No property value shall be defined.
-
-    - #interrupt-cells: Specifies the number of cells needed to encode an
-      interrupt source.  The type shall be a <u32> and the value shall be 2.
-
-    - #address-cells: Specifies the number of cells needed to encode an
-      address.  The type shall be <u32> and the value shall be 0.  As such,
-      'interrupt-map' nodes do not have to specify a parent unit address.
-
-Optional properties:
-
-    - pic-no-reset: The presence of this property indicates that the PIC
-      shall not be reset during runtime initialization.  No property value shall
-      be defined.  The presence of this property also mandates that any
-      initialization related to interrupt sources shall be limited to sources
-      explicitly referenced in the device tree.
-
-* Interrupt Specifier Definition
-
-  Interrupt specifiers consists of 2 cells encoded as
-  follows:
-
-    - <1st-cell>: The interrupt-number that identifies the interrupt source.
-
-    - <2nd-cell>: The level-sense information, encoded as follows:
-                    0 = low-to-high edge triggered
-                    1 = active low level-sensitive
-                    2 = active high level-sensitive
-                    3 = high-to-low edge triggered
-
-* Examples
-
-Example 1:
-
-	/*
-	 * An Open PIC interrupt controller
-	 */
-	mpic: pic@40000 {
-		// This is an interrupt controller node.
-		interrupt-controller;
-
-		// No address cells so that 'interrupt-map' nodes which reference
-		// this Open PIC node do not need a parent address specifier.
-		#address-cells = <0>;
-
-		// Two cells to encode interrupt sources.
-		#interrupt-cells = <2>;
-
-		// Offset address of 0x40000 and size of 0x40000.
-		reg = <0x40000 0x40000>;
-
-		// Compatible with Open PIC.
-		compatible = "open-pic";
-
-		// The PIC shall not be reset.
-		pic-no-reset;
-	};
-
-Example 2:
-
-	/*
-	 * An interrupt generating device that is wired to an Open PIC.
-	 */
-	serial0: serial@4500 {
-		// Interrupt source '42' that is active high level-sensitive.
-		// Note that there are only two cells as specified in the interrupt
-		// parent's '#interrupt-cells' property.
-		interrupts = <42 2>;
-
-		// The interrupt controller that this device is wired to.
-		interrupt-parent = <&mpic>;
-	};
-
-* References
-
-[1] Devicetree Specification
-    (https://www.devicetree.org/specifications/)
-
diff --git a/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt
deleted file mode 100644
index 55c04faa3f3f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-OpenRISC 1000 Programmable Interrupt Controller
-
-Required properties:
-
-- compatible : should be "opencores,or1k-pic-level" for variants with
-  level triggered interrupt lines, "opencores,or1k-pic-edge" for variants with
-  edge triggered interrupt lines or "opencores,or1200-pic" for machines
-  with the non-spec compliant or1200 type implementation.
-
-  "opencores,or1k-pic" is also provided as an alias to "opencores,or1200-pic",
-  but this is only for backwards compatibility.
-
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 1.
-
-Example:
-
-intc: interrupt-controller {
-	compatible = "opencores,or1k-pic-level";
-	interrupt-controller;
-	#interrupt-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.yaml
new file mode 100644
index 000000000000..995b68c3aed4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/opencores,or1k-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenRISC 1000 Programmable Interrupt Controller
+
+maintainers:
+  - Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
+
+properties:
+  compatible:
+    enum:
+      - opencores,or1k-pic-level
+      - opencores,or1k-pic-edge
+      - opencores,or1200-pic
+      - opencores,or1k-pic
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "opencores,or1k-pic-level";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt
deleted file mode 100644
index caec07cc7149..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Open Multi-Processor Interrupt Controller
-
-Required properties:
-
-- compatible : This should be "openrisc,ompic"
-- reg : Specifies base physical address and size of the register space. The
-  size is based on the number of cores the controller has been configured
-  to handle, this should be set to 8 bytes per cpu core.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : This should be set to 0 as this will not be an irq
-  parent.
-- interrupts : Specifies the interrupt line to which the ompic is wired.
-
-Example:
-
-ompic: interrupt-controller@98000000 {
-	compatible = "openrisc,ompic";
-	reg = <0x98000000 16>;
-	interrupt-controller;
-	#interrupt-cells = <0>;
-	interrupts = <1>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.yaml b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.yaml
new file mode 100644
index 000000000000..4efbfba3aa6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/openrisc,ompic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Open Multi-Processor Interrupt Controller
+
+maintainers:
+  - Stafford Horne <shorne@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: openrisc,ompic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@98000000 {
+        compatible = "openrisc,ompic";
+        reg = <0x98000000 16>;
+        interrupt-controller;
+        #interrupt-cells = <0>;
+        interrupts = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-cpu-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-cpu-intc.yaml
new file mode 100644
index 000000000000..ab32a91af4c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-cpu-intc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qca,ar7100-cpu-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros ath79 CPU interrupt controller
+
+maintainers:
+  - Alban Bedel <albeu@free.fr>
+
+description:
+  On most SoC the IRQ controller need to flush the DDR FIFO before running the
+  interrupt handler of some devices. This is configured using the
+  qca,ddr-wb-channels and qca,ddr-wb-channel-interrupts properties.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qca,ar9132-cpu-intc
+          - const: qca,ar7100-cpu-intc
+      - items:
+          - const: qca,ar7100-cpu-intc
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  qca,ddr-wb-channel-interrupts:
+    description: List of interrupts needing a write buffer flush
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  qca,ddr-wb-channels:
+    description: List of write buffer channel phandles for each interrupt
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+      interrupt-controller {
+          compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+          interrupt-controller;
+          #interrupt-cells = <1>;
+
+          qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+          qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+                                <&ddr_ctrl 0>, <&ddr_ctrl 1>;
+      };
+
+      ddr_ctrl: memory-controller {
+          #qca,ddr-wb-channel-cells = <1>;
+      };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-misc-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-misc-intc.yaml
new file mode 100644
index 000000000000..ae813189f5ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ar7100-misc-intc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qca,ar7100-misc-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller
+
+maintainers:
+  - Alban Bedel <albeu@free.fr>
+  - Alexander Couzens <lynxis@fe80.eu>
+
+description:
+  The Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller is a secondary
+  controller for lower priority interrupts.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: qca,ar9132-misc-intc
+          - const: qca,ar7100-misc-intc
+      - const: qca,ar7240-misc-intc
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+examples:
+  - |
+    interrupt-controller@18060010 {
+        compatible = "qca,ar9132-misc-intc", "qca,ar7100-misc-intc";
+        reg = <0x18060010 0x4>;
+        interrupts = <6>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
deleted file mode 100644
index aabce7810d29..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Binding for Qualcomm Atheros AR7xxx/AR9XXX CPU interrupt controller
-
-On most SoC the IRQ controller need to flush the DDR FIFO before running
-the interrupt handler of some devices. This is configured using the
-qca,ddr-wb-channels and qca,ddr-wb-channel-interrupts properties.
-
-Required Properties:
-
-- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-cpu-intc"
-  as fallback
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode interrupt
-		     source, should be 1 for intc
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Optional Properties:
-
-- qca,ddr-wb-channel-interrupts: List of the interrupts needing a write
-  buffer flush
-- qca,ddr-wb-channels: List of phandles to the write buffer channels for
-  each interrupt. If qca,ddr-wb-channel-interrupts is not present the interrupt
-  default to the entry's index.
-
-Example:
-
-	interrupt-controller {
-		compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
-		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
-					<&ddr_ctrl 0>, <&ddr_ctrl 1>;
-	};
-
-	...
-
-	ddr_ctrl: memory-controller@18000000 {
-		...
-		#qca,ddr-wb-channel-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
deleted file mode 100644
index ad70006c1848..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Binding for Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller
-
-The MISC interrupt controller is a secondary controller for lower priority
-interrupt.
-
-Required Properties:
-- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or
-  "qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc"
-- reg: Base address and size of the controllers memory area
-- interrupts: Interrupt specifier for the controllers interrupt.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode interrupt
-		     source, should be 1
-
-Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x,
-use ar7240 for all other SoCs.
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Example:
-
-	interrupt-controller@18060010 {
-		compatible = "qca,ar9132-misc-intc", "qca,ar7100-misc-intc";
-		reg = <0x18060010 0x4>;
-
-		interrupt-parent = <&cpuintc>;
-		interrupts = <6>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
-
-Another example:
-
-	interrupt-controller@18060010 {
-		compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc";
-		reg = <0x18060010 0x4>;
-
-		interrupt-parent = <&cpuintc>;
-		interrupts = <6>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
new file mode 100644
index 000000000000..ebb40c48950a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,mpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcom MPM Interrupt Controller
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description:
+  Qualcomm Technologies Inc. SoCs based on the RPM architecture have a
+  MSM Power Manager (MPM) that is in always-on domain. In addition to managing
+  resources during sleep, the hardware also has an interrupt controller that
+  monitors the interrupts when the system is asleep, wakes up the APSS when
+  one of these interrupts occur and replays it to GIC interrupt controller
+  after GIC becomes operational.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,mpm
+
+  reg:
+    maxItems: 1
+    description:
+      Specifies the base address and size of vMPM registers in RPM MSG RAM.
+    deprecated: true
+
+  qcom,rpm-msg-ram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the APSS MPM slice of the RPM Message RAM
+
+  interrupts:
+    maxItems: 1
+    description:
+      Specify the IRQ used by RPM to wakeup APSS.
+
+  mboxes:
+    maxItems: 1
+    description:
+      Specify the mailbox used to notify RPM for writing vMPM registers.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the MPM pin number for the interrupt, and the second
+      is the trigger type.
+
+  qcom,mpm-pin-count:
+    description:
+      Specify the total MPM pin count that a SoC supports.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,mpm-pin-map:
+    description:
+      A set of MPM pin numbers and the corresponding GIC SPIs.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: MPM pin number
+        - description: GIC SPI number for the MPM pin
+
+  '#power-domain-cells':
+    const: 0
+
+required:
+  - compatible
+  - interrupts
+  - mboxes
+  - interrupt-controller
+  - '#interrupt-cells'
+  - qcom,mpm-pin-count
+  - qcom,mpm-pin-map
+  - qcom,rpm-msg-ram
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    remoteproc-rpm {
+        compatible = "qcom,msm8998-rpm-proc", "qcom,rpm-proc";
+
+        glink-edge {
+            compatible = "qcom,glink-rpm";
+
+            interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+            qcom,rpm-msg-ram = <&rpm_msg_ram>;
+            mboxes = <&apcs_glb 0>;
+        };
+
+        mpm: interrupt-controller {
+            compatible = "qcom,mpm";
+            qcom,rpm-msg-ram = <&apss_mpm>;
+            interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&apcs_glb 1>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&intc>;
+            qcom,mpm-pin-count = <96>;
+            qcom,mpm-pin-map = <2 275>,
+                               <5 296>,
+                               <12 422>,
+                               <24 79>,
+                               <86 183>,
+                               <91 260>;
+            #power-domain-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
deleted file mode 100644
index 98d89e53013d..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-PDC interrupt controller
-
-Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a
-Power Domain Controller (PDC) that is on always-on domain. In addition to
-providing power control for the power domains, the hardware also has an
-interrupt controller that can be used to help detect edge low interrupts as
-well detect interrupts when the GIC is non-operational.
-
-GIC is parent interrupt controller at the highest level. Platform interrupt
-controller PDC is next in hierarchy, followed by others. Drivers requiring
-wakeup capabilities of their device interrupts routed through the PDC, must
-specify PDC as their interrupt controller and request the PDC port associated
-with the GIC interrupt. See example below.
-
-Properties:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should contain "qcom,<soc>-pdc" and "qcom,pdc"
-		    - "qcom,sc7180-pdc": For SC7180
-		    - "qcom,sc7280-pdc": For SC7280
-		    - "qcom,sdm845-pdc": For SDM845
-		    - "qcom,sdm8250-pdc": For SM8250
-		    - "qcom,sdm8350-pdc": For SM8350
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Specifies the base physical address for PDC hardware.
-
-- interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Specifies the number of cells needed to encode an interrupt
-		    source.
-		    Must be 2.
-		    The first element of the tuple is the PDC pin for the
-		    interrupt.
-		    The second element is the trigger type.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <bool>
-	Definition: Identifies the node as an interrupt controller.
-
-- qcom,pdc-ranges:
-	Usage: required
-	Value type: <u32 array>
-	Definition: Specifies the PDC pin offset and the number of PDC ports.
-		    The tuples indicates the valid mapping of valid PDC ports
-		    and their hwirq mapping.
-		    The first element of the tuple is the starting PDC port.
-		    The second element is the GIC hwirq number for the PDC port.
-		    The third element is the number of interrupts in sequence.
-
-Example:
-
-	pdc: interrupt-controller@b220000 {
-		compatible = "qcom,sdm845-pdc";
-		reg = <0xb220000 0x30000>;
-		qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&intc>;
-		interrupt-controller;
-	};
-
-DT binding of a device that wants to use the GIC SPI 514 as a wakeup
-interrupt, must do -
-
-	wake-device {
-		interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-In this case interrupt 514 would be mapped to port 2 on the PDC as defined by
-the qcom,pdc-ranges property.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
new file mode 100644
index 000000000000..38d0c2d57dd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,pdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PDC interrupt controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a
+  Power Domain Controller (PDC) that is on always-on domain. In addition to
+  providing power control for the power domains, the hardware also has an
+  interrupt controller that can be used to help detect edge low interrupts as
+  well detect interrupts when the GIC is non-operational.
+
+  GIC is parent interrupt controller at the highest level. Platform interrupt
+  controller PDC is next in hierarchy, followed by others. Drivers requiring
+  wakeup capabilities of their device interrupts routed through the PDC, must
+  specify PDC as their interrupt controller and request the PDC port associated
+  with the GIC interrupt. See example below.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,glymur-pdc
+          - qcom,qcs615-pdc
+          - qcom,qcs8300-pdc
+          - qcom,qdu1000-pdc
+          - qcom,sa8255p-pdc
+          - qcom,sa8775p-pdc
+          - qcom,sar2130p-pdc
+          - qcom,sc7180-pdc
+          - qcom,sc7280-pdc
+          - qcom,sc8180x-pdc
+          - qcom,sc8280xp-pdc
+          - qcom,sdm670-pdc
+          - qcom,sdm845-pdc
+          - qcom,sdx55-pdc
+          - qcom,sdx65-pdc
+          - qcom,sdx75-pdc
+          - qcom,sm4450-pdc
+          - qcom,sm6350-pdc
+          - qcom,sm8150-pdc
+          - qcom,sm8250-pdc
+          - qcom,sm8350-pdc
+          - qcom,sm8450-pdc
+          - qcom,sm8550-pdc
+          - qcom,sm8650-pdc
+          - qcom,sm8750-pdc
+          - qcom,x1e80100-pdc
+      - const: qcom,pdc
+
+  reg:
+    minItems: 1
+    items:
+      - description: PDC base register region
+      - description: Edge or Level config register for SPI interrupts
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  qcom,pdc-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 128 # no hard limit
+    items:
+      items:
+        - description: starting PDC port
+        - description: GIC hwirq number for the PDC port
+        - description: number of interrupts in sequence
+    description: |
+      Specifies the PDC pin offset and the number of PDC ports.
+      The tuples indicates the valid mapping of valid PDC ports
+      and their hwirq mapping.
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - qcom,pdc-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pdc: interrupt-controller@b220000 {
+        compatible = "qcom,sdm845-pdc", "qcom,pdc";
+        reg = <0xb220000 0x30000>;
+        qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&intc>;
+        interrupt-controller;
+    };
+
+    wake-device {
+        interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml
new file mode 100644
index 000000000000..0fa952a9edfd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ralink,rt2880-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ralink,rt2880-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink SoCs Interrupt Controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description:
+  This interrupt controller support a central point for interrupt aggregation
+  for platform related blocks.
+
+properties:
+  compatible:
+    const: ralink,rt2880-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@200 {
+      compatible = "ralink,rt2880-intc";
+      reg = <0x200 0x100>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
deleted file mode 100644
index e0062aebf025..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-RDA Micro RDA8810PL Interrupt Controller
-
-The interrupt controller in RDA8810PL SoC is a custom interrupt controller
-which supports up to 32 interrupts.
-
-Required properties:
-
-- compatible: Should be "rda,8810pl-intc".
-- reg: Specifies base physical address of the registers set.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-
-The interrupt sources are as follows:
-
-ID	Name
-------------
-0:	PULSE_DUMMY
-1:	I2C
-2:	NAND_NFSC
-3:	SDMMC1
-4:	SDMMC2
-5:	SDMMC3
-6:	SPI1
-7:	SPI2
-8:	SPI3
-9:	UART1
-10:	UART2
-11:	UART3
-12:	GPIO1
-13:	GPIO2
-14:	GPIO3
-15:	KEYPAD
-16:	TIMER
-17:	TIMEROS
-18:	COMREG0
-19:	COMREG1
-20:	USB
-21:	DMC
-22:	DMA
-23:	CAMERA
-24:	GOUDA
-25:	GPU
-26:	VPU_JPG
-27:	VPU_HOST
-28:	VOC
-29:	AUIFC0
-30:	AUIFC1
-31:	L2CC
-
-Example:
-		apb@20800000 {
-			compatible = "simple-bus";
-			...
-			intc: interrupt-controller@0 {
-				compatible = "rda,8810pl-intc";
-				reg = <0x0 0x1000>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
new file mode 100644
index 000000000000..96d6285d0087
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/rda,8810pl-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro RDA8810PL interrupt controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: rda,8810pl-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    intc: interrupt-controller@0 {
+      compatible = "rda,8810pl-intc";
+      reg = <0x0 0x1000>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
index 9e76fff20323..833a01cdd1b1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
@@ -4,7 +4,15 @@
 $id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Realtek RTL SoC interrupt controller devicetree bindings
+title: Realtek RTL SoC interrupt controller
+
+description:
+  Interrupt controller and router for Realtek MIPS SoCs, allowing each SoC
+  interrupt to be routed to one parent CPU (hardware) interrupt, or left
+  disconnected.
+  All connected input lines from SoC peripherals can be masked individually,
+  and an interrupt status register is present to indicate which interrupts are
+  pending.
 
 maintainers:
   - Birger Koblitz <mail@birger-koblitz.de>
@@ -13,23 +21,37 @@ maintainers:
 
 properties:
   compatible:
-    const: realtek,rtl-intc
+    oneOf:
+      - items:
+          - enum:
+              - realtek,rtl8380-intc
+              - realtek,rtl9300-intc
+          - const: realtek,rtl-intc
+      - const: realtek,rtl-intc
+        deprecated: true
 
   "#interrupt-cells":
+    description:
+      SoC interrupt line index.
     const: 1
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: vpe0 registers
+      - description: vpe1 registers
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 15
+    description:
+      List of parent interrupts, in the order that they are connected to this
+      interrupt router's outputs, starting at the first output.
 
   interrupt-controller: true
 
-  "#address-cells":
-    const: 0
-
   interrupt-map:
+    deprecated: true
     description: Describes mapping from SoC interrupts to CPU interrupts
 
 required:
@@ -37,21 +59,47 @@ required:
   - reg
   - "#interrupt-cells"
   - interrupt-controller
-  - "#address-cells"
-  - interrupt-map
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: realtek,rtl-intc
+    then:
+      properties:
+        "#address-cells":
+          const: 0
+      required:
+        - "#address-cells"
+        - interrupt-map
+    else:
+      required:
+        - interrupts
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: realtek,rtl9300-intc
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
 
 additionalProperties: false
 
 examples:
   - |
-    intc: interrupt-controller@3000 {
-      compatible = "realtek,rtl-intc";
+    interrupt-controller@3000 {
+      compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
       #interrupt-cells = <1>;
       interrupt-controller;
-      reg = <0x3000 0x20>;
-      #address-cells = <0>;
-      interrupt-map =
-              <31 &cpuintc 2>,
-              <30 &cpuintc 1>,
-              <29 &cpuintc 5>;
+      reg = <0x3000 0x18>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>, <3>, <4>, <5>, <6>;
     };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
deleted file mode 100644
index 56e8d82aff34..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* H8/300H Interrupt controller
-
-Required properties:
-
-- compatible: has to be "renesas,h8300h-intc", "renesas,h8300-intc" as fallback.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory
-- regs: Base address of interrupt controller registers.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-
-Example:
-
-	h8intc: interrupt-controller@fee012 {
-		compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfee012 7>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
deleted file mode 100644
index faded2b1559b..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* H8S Interrupt controller
-
-Required properties:
-
-- compatible: has to be "renesas,h8s-intc", "renesas,h8300-intc" as fallback.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory
-- regs: Base address of interrupt controller registers.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-
-Example:
-
-	h8intc: interrupt-controller@fffe00 {
-		compatible = "renesas,h8s-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfffe00 24>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
index 79d0358e2f61..fb3c29e81349 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/renesas,irqc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DT bindings for the R-Mobile/R-Car/RZ/G interrupt controller
+title: R-Mobile/R-Car/RZ/G interrupt controller
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
@@ -36,6 +36,10 @@ properties:
           - renesas,intc-ex-r8a77980    # R-Car V3H
           - renesas,intc-ex-r8a77990    # R-Car E3
           - renesas,intc-ex-r8a77995    # R-Car D3
+          - renesas,intc-ex-r8a779a0    # R-Car V3U
+          - renesas,intc-ex-r8a779f0    # R-Car S4-8
+          - renesas,intc-ex-r8a779g0    # R-Car V4H
+          - renesas,intc-ex-r8a779h0    # R-Car V4M
       - const: renesas,irqc
 
   '#interrupt-cells':
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
new file mode 100644
index 000000000000..44b6ae5fc802
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  IA55 performs various interrupt controls including synchronization for the external
+  interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
+  interrupts output by each IP. And it notifies the interrupt to the GIC
+    - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
+    - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
+    - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
+      stand-up edge detection interrupts)
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043u-irqc    # RZ/G2UL
+              - renesas,r9a07g044-irqc     # RZ/G2{L,LC}
+              - renesas,r9a07g054-irqc     # RZ/V2L
+              - renesas,r9a08g045-irqc     # RZ/G3S
+          - const: renesas,rzg2l-irqc
+
+      - const: renesas,r9a07g043f-irqc     # RZ/Five
+
+  '#interrupt-cells':
+    description: The first cell should contain a macro RZG2L_{NMI,IRQX} included in the
+                 include/dt-bindings/interrupt-controller/irqc-rzg2l.h and the second
+                 cell is used to specify the flag.
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 45
+    items:
+      - description: NMI interrupt
+      - description: IRQ0 interrupt
+      - description: IRQ1 interrupt
+      - description: IRQ2 interrupt
+      - description: IRQ3 interrupt
+      - description: IRQ4 interrupt
+      - description: IRQ5 interrupt
+      - description: IRQ6 interrupt
+      - description: IRQ7 interrupt
+      - description: GPIO interrupt, TINT0
+      - description: GPIO interrupt, TINT1
+      - description: GPIO interrupt, TINT2
+      - description: GPIO interrupt, TINT3
+      - description: GPIO interrupt, TINT4
+      - description: GPIO interrupt, TINT5
+      - description: GPIO interrupt, TINT6
+      - description: GPIO interrupt, TINT7
+      - description: GPIO interrupt, TINT8
+      - description: GPIO interrupt, TINT9
+      - description: GPIO interrupt, TINT10
+      - description: GPIO interrupt, TINT11
+      - description: GPIO interrupt, TINT12
+      - description: GPIO interrupt, TINT13
+      - description: GPIO interrupt, TINT14
+      - description: GPIO interrupt, TINT15
+      - description: GPIO interrupt, TINT16
+      - description: GPIO interrupt, TINT17
+      - description: GPIO interrupt, TINT18
+      - description: GPIO interrupt, TINT19
+      - description: GPIO interrupt, TINT20
+      - description: GPIO interrupt, TINT21
+      - description: GPIO interrupt, TINT22
+      - description: GPIO interrupt, TINT23
+      - description: GPIO interrupt, TINT24
+      - description: GPIO interrupt, TINT25
+      - description: GPIO interrupt, TINT26
+      - description: GPIO interrupt, TINT27
+      - description: GPIO interrupt, TINT28
+      - description: GPIO interrupt, TINT29
+      - description: GPIO interrupt, TINT30
+      - description: GPIO interrupt, TINT31
+      - description: Bus error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 1bit error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 2bit error interrupt
+      - description: ECCRAM0 or combined ECCRAM0/1 error overflow interrupt
+      - description: ECCRAM1 1bit error interrupt
+      - description: ECCRAM1 2bit error interrupt
+      - description: ECCRAM1 error overflow interrupt
+
+  interrupt-names:
+    minItems: 45
+    items:
+      - const: nmi
+      - const: irq0
+      - const: irq1
+      - const: irq2
+      - const: irq3
+      - const: irq4
+      - const: irq5
+      - const: irq6
+      - const: irq7
+      - const: tint0
+      - const: tint1
+      - const: tint2
+      - const: tint3
+      - const: tint4
+      - const: tint5
+      - const: tint6
+      - const: tint7
+      - const: tint8
+      - const: tint9
+      - const: tint10
+      - const: tint11
+      - const: tint12
+      - const: tint13
+      - const: tint14
+      - const: tint15
+      - const: tint16
+      - const: tint17
+      - const: tint18
+      - const: tint19
+      - const: tint20
+      - const: tint21
+      - const: tint22
+      - const: tint23
+      - const: tint24
+      - const: tint25
+      - const: tint26
+      - const: tint27
+      - const: tint28
+      - const: tint29
+      - const: tint30
+      - const: tint31
+      - const: bus-err
+      - const: ec7tie1-0
+      - const: ec7tie2-0
+      - const: ec7tiovf-0
+      - const: ec7tie1-1
+      - const: ec7tie2-1
+      - const: ec7tiovf-1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a08g045-irqc
+    then:
+      properties:
+        interrupts:
+          maxItems: 45
+        interrupt-names:
+          maxItems: 45
+    else:
+      properties:
+        interrupts:
+          minItems: 48
+        interrupt-names:
+          minItems: 48
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    irqc: interrupt-controller@110a0000 {
+        compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
+        reg = <0x110a0000 0x10000>;
+        #interrupt-cells = <2>;
+        #address-cells = <0>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "nmi",
+                          "irq0", "irq1", "irq2", "irq3",
+                          "irq4", "irq5", "irq6", "irq7",
+                          "tint0", "tint1", "tint2", "tint3",
+                          "tint4", "tint5", "tint6", "tint7",
+                          "tint8", "tint9", "tint10", "tint11",
+                          "tint12", "tint13", "tint14", "tint15",
+                          "tint16", "tint17", "tint18", "tint19",
+                          "tint20", "tint21", "tint22", "tint23",
+                          "tint24", "tint25", "tint26", "tint27",
+                          "tint28", "tint29", "tint30", "tint31",
+                          "bus-err", "ec7tie1-0", "ec7tie2-0",
+                          "ec7tiovf-0", "ec7tie1-1", "ec7tie2-1",
+                          "ec7tiovf-1";
+        clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+                 <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+        clock-names = "clk", "pclk";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_IA55_RESETN>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzv2h-icu.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzv2h-icu.yaml
new file mode 100644
index 000000000000..3f99c8645767
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzv2h-icu.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzv2h-icu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G3E,V2H(P)} Interrupt Control Unit
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description:
+  The Interrupt Control Unit (ICU) handles external interrupts (NMI, IRQ, and
+  TINT), error interrupts, DMAC requests, GPT interrupts, and internal
+  interrupts.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r9a09g047-icu # RZ/G3E
+      - renesas,r9a09g057-icu # RZ/V2H(P)
+
+  '#interrupt-cells':
+    description: The first cell is the SPI number of the NMI or the
+      PORT_IRQ[0-15] interrupt, as per user manual. The second cell is used to
+      specify the flag.
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 58
+    items:
+      - description: NMI interrupt
+      - description: PORT_IRQ0 interrupt
+      - description: PORT_IRQ1 interrupt
+      - description: PORT_IRQ2 interrupt
+      - description: PORT_IRQ3 interrupt
+      - description: PORT_IRQ4 interrupt
+      - description: PORT_IRQ5 interrupt
+      - description: PORT_IRQ6 interrupt
+      - description: PORT_IRQ7 interrupt
+      - description: PORT_IRQ8 interrupt
+      - description: PORT_IRQ9 interrupt
+      - description: PORT_IRQ10 interrupt
+      - description: PORT_IRQ11 interrupt
+      - description: PORT_IRQ12 interrupt
+      - description: PORT_IRQ13 interrupt
+      - description: PORT_IRQ14 interrupt
+      - description: PORT_IRQ15 interrupt
+      - description: GPIO interrupt, TINT0
+      - description: GPIO interrupt, TINT1
+      - description: GPIO interrupt, TINT2
+      - description: GPIO interrupt, TINT3
+      - description: GPIO interrupt, TINT4
+      - description: GPIO interrupt, TINT5
+      - description: GPIO interrupt, TINT6
+      - description: GPIO interrupt, TINT7
+      - description: GPIO interrupt, TINT8
+      - description: GPIO interrupt, TINT9
+      - description: GPIO interrupt, TINT10
+      - description: GPIO interrupt, TINT11
+      - description: GPIO interrupt, TINT12
+      - description: GPIO interrupt, TINT13
+      - description: GPIO interrupt, TINT14
+      - description: GPIO interrupt, TINT15
+      - description: GPIO interrupt, TINT16
+      - description: GPIO interrupt, TINT17
+      - description: GPIO interrupt, TINT18
+      - description: GPIO interrupt, TINT19
+      - description: GPIO interrupt, TINT20
+      - description: GPIO interrupt, TINT21
+      - description: GPIO interrupt, TINT22
+      - description: GPIO interrupt, TINT23
+      - description: GPIO interrupt, TINT24
+      - description: GPIO interrupt, TINT25
+      - description: GPIO interrupt, TINT26
+      - description: GPIO interrupt, TINT27
+      - description: GPIO interrupt, TINT28
+      - description: GPIO interrupt, TINT29
+      - description: GPIO interrupt, TINT30
+      - description: GPIO interrupt, TINT31
+      - description: Software interrupt, INTA55_0
+      - description: Software interrupt, INTA55_1
+      - description: Software interrupt, INTA55_2
+      - description: Software interrupt, INTA55_3
+      - description: Error interrupt to CA55
+      - description: GTCCRA compare match/input capture (U0)
+      - description: GTCCRB compare match/input capture (U0)
+      - description: GTCCRA compare match/input capture (U1)
+      - description: GTCCRB compare match/input capture (U1)
+
+  interrupt-names:
+    minItems: 58
+    items:
+      - const: nmi
+      - const: port_irq0
+      - const: port_irq1
+      - const: port_irq2
+      - const: port_irq3
+      - const: port_irq4
+      - const: port_irq5
+      - const: port_irq6
+      - const: port_irq7
+      - const: port_irq8
+      - const: port_irq9
+      - const: port_irq10
+      - const: port_irq11
+      - const: port_irq12
+      - const: port_irq13
+      - const: port_irq14
+      - const: port_irq15
+      - const: tint0
+      - const: tint1
+      - const: tint2
+      - const: tint3
+      - const: tint4
+      - const: tint5
+      - const: tint6
+      - const: tint7
+      - const: tint8
+      - const: tint9
+      - const: tint10
+      - const: tint11
+      - const: tint12
+      - const: tint13
+      - const: tint14
+      - const: tint15
+      - const: tint16
+      - const: tint17
+      - const: tint18
+      - const: tint19
+      - const: tint20
+      - const: tint21
+      - const: tint22
+      - const: tint23
+      - const: tint24
+      - const: tint25
+      - const: tint26
+      - const: tint27
+      - const: tint28
+      - const: tint29
+      - const: tint30
+      - const: tint31
+      - const: int-ca55-0
+      - const: int-ca55-1
+      - const: int-ca55-2
+      - const: int-ca55-3
+      - const: icu-error-ca55
+      - const: gpt-u0-gtciada
+      - const: gpt-u0-gtciadb
+      - const: gpt-u1-gtciada
+      - const: gpt-u1-gtciadb
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+    icu: interrupt-controller@10400000 {
+        compatible = "renesas,r9a09g057-icu";
+        reg = <0x10400000 0x10000>;
+        #interrupt-cells = <2>;
+        #address-cells = <0>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 262 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "nmi",
+                          "port_irq0", "port_irq1", "port_irq2",
+                          "port_irq3", "port_irq4", "port_irq5",
+                          "port_irq6", "port_irq7", "port_irq8",
+                          "port_irq9", "port_irq10", "port_irq11",
+                          "port_irq12", "port_irq13", "port_irq14",
+                          "port_irq15",
+                          "tint0", "tint1", "tint2", "tint3",
+                          "tint4", "tint5", "tint6", "tint7",
+                          "tint8", "tint9", "tint10", "tint11",
+                          "tint12", "tint13", "tint14", "tint15",
+                          "tint16", "tint17", "tint18", "tint19",
+                          "tint20", "tint21", "tint22", "tint23",
+                          "tint24", "tint25", "tint26", "tint27",
+                          "tint28", "tint29", "tint30", "tint31",
+                          "int-ca55-0", "int-ca55-1",
+                          "int-ca55-2", "int-ca55-3",
+                          "icu-error-ca55",
+                          "gpt-u0-gtciada", "gpt-u0-gtciadb",
+                          "gpt-u1-gtciada", "gpt-u1-gtciadb";
+        clocks = <&cpg CPG_MOD 0x5>;
+        power-domains = <&cpg>;
+        resets = <&cpg 0x36>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
new file mode 100644
index 000000000000..bef00521d5da
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,aplic.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,aplic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Advanced Platform Level Interrupt Controller (APLIC)
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description:
+  The RISC-V advanced interrupt architecture (AIA) defines an advanced
+  platform level interrupt controller (APLIC) for handling wired interrupts
+  in a RISC-V platform. The RISC-V AIA specification can be found at
+  https://github.com/riscv/riscv-aia.
+
+  The RISC-V APLIC is implemented as hierarchical APLIC domains where all
+  interrupt sources connect to the root APLIC domain and a parent APLIC
+  domain can delegate interrupt sources to it's child APLIC domains. There
+  is one device tree node for each APLIC domain.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qemu,aplic
+      - const: riscv,aplic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 16384
+    description:
+      Given APLIC domain directly injects external interrupts to a set of
+      RISC-V HARTS (or CPUs). Each node pointed to should be a riscv,cpu-intc
+      node, which has a CPU node (i.e. RISC-V HART) as parent.
+
+  msi-parent:
+    description:
+      Given APLIC domain forwards wired interrupts as MSIs to a AIA incoming
+      message signaled interrupt controller (IMSIC). If both "msi-parent" and
+      "interrupts-extended" properties are present then it means the APLIC
+      domain supports both MSI mode and Direct mode in HW. In this case, the
+      APLIC driver has to choose between MSI mode or Direct mode.
+
+  riscv,num-sources:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 1023
+    description:
+      Specifies the number of wired interrupt sources supported by this
+      APLIC domain.
+
+  riscv,children:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 1024
+    items:
+      maxItems: 1
+    description:
+      A list of child APLIC domains for the given APLIC domain. Each child
+      APLIC domain is assigned a child index in increasing order, with the
+      first child APLIC domain assigned child index 0. The APLIC domain child
+      index is used by firmware to delegate interrupts from the given APLIC
+      domain to a particular child APLIC domain.
+
+  riscv,delegation:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 1024
+    items:
+      items:
+        - description: child APLIC domain phandle
+        - description: first interrupt number of the parent APLIC domain (inclusive)
+        - description: last interrupt number of the parent APLIC domain (inclusive)
+    description:
+      A interrupt delegation list where each entry is a triple consisting
+      of child APLIC domain phandle, first interrupt number of the parent
+      APLIC domain, and last interrupt number of the parent APLIC domain.
+      Firmware must configure interrupt delegation registers based on
+      interrupt delegation list.
+
+  riscv,hart-indexes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16384
+    description:
+      A list of hart indexes that APLIC should use to address each hart
+      that is mentioned in the "interrupts-extended"
+
+dependencies:
+  riscv,delegation: [ "riscv,children" ]
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - riscv,num-sources
+
+anyOf:
+  - required:
+      - interrupts-extended
+  - required:
+      - msi-parent
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example 1 (APLIC domains directly injecting interrupt to HARTs):
+
+    interrupt-controller@c000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      interrupts-extended = <&cpu1_intc 11>,
+                            <&cpu2_intc 11>,
+                            <&cpu3_intc 11>,
+                            <&cpu4_intc 11>;
+      reg = <0xc000000 0x4080>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+      riscv,children = <&aplic1>, <&aplic2>;
+      riscv,delegation = <&aplic1 1 63>;
+    };
+
+    aplic1: interrupt-controller@d000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      interrupts-extended = <&cpu1_intc 9>,
+                            <&cpu2_intc 9>;
+      reg = <0xd000000 0x4080>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+    };
+
+    aplic2: interrupt-controller@e000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      interrupts-extended = <&cpu3_intc 9>,
+                            <&cpu4_intc 9>;
+      reg = <0xe000000 0x4080>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+    };
+
+  - |
+    // Example 2 (APLIC domains forwarding interrupts as MSIs):
+
+    interrupt-controller@c000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      msi-parent = <&imsic_mlevel>;
+      reg = <0xc000000 0x4000>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+      riscv,children = <&aplic3>;
+      riscv,delegation = <&aplic3 1 63>;
+    };
+
+    aplic3: interrupt-controller@d000000 {
+      compatible = "qemu,aplic", "riscv,aplic";
+      msi-parent = <&imsic_slevel>;
+      reg = <0xd000000 0x4000>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      riscv,num-sources = <63>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
deleted file mode 100644
index 265b223cd978..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-RISC-V Hart-Level Interrupt Controller (HLIC)
----------------------------------------------
-
-RISC-V cores include Control Status Registers (CSRs) which are local to each
-CPU core (HART in RISC-V terminology) and can be read or written by software.
-Some of these CSRs are used to control local interrupts connected to the core.
-Every interrupt is ultimately routed through a hart's HLIC before it
-interrupts that hart.
-
-The RISC-V supervisor ISA manual specifies three interrupt sources that are
-attached to every HLIC: software interrupts, the timer interrupt, and external
-interrupts.  Software interrupts are used to send IPIs between cores.  The
-timer interrupt comes from an architecturally mandated real-time timer that is
-controlled via Supervisor Binary Interface (SBI) calls and CSR reads.  External
-interrupts connect all other device interrupts to the HLIC, which are routed
-via the platform-level interrupt controller (PLIC).
-
-All RISC-V systems that conform to the supervisor ISA specification are
-required to have a HLIC with these three interrupt sources present.  Since the
-interrupt map is defined by the ISA it's not listed in the HLIC's device tree
-entry, though external interrupt controllers (like the PLIC, for example) will
-need to define how their interrupts map to the relevant HLICs.  This means
-a PLIC interrupt property will typically list the HLICs for all present HARTs
-in the system.
-
-Required properties:
-- compatible : "riscv,cpu-intc"
-- #interrupt-cells : should be <1>.  The interrupt sources are defined by the
-  RISC-V supervisor ISA manual, with only the following three interrupts being
-  defined for supervisor mode:
-    - Source 1 is the supervisor software interrupt, which can be sent by an SBI
-      call and is reserved for use by software.
-    - Source 5 is the supervisor timer interrupt, which can be configured by
-      SBI calls and implements a one-shot timer.
-    - Source 9 is the supervisor external interrupt, which chains to all other
-      device interrupts.
-- interrupt-controller : Identifies the node as an interrupt controller
-
-Furthermore, this interrupt-controller MUST be embedded inside the cpu
-definition of the hart whose CSRs control these local interrupts.
-
-An example device tree entry for a HLIC is show below.
-
-	cpu1: cpu@1 {
-		compatible = "riscv";
-		...
-		cpu1-intc: interrupt-controller {
-			#interrupt-cells = <1>;
-			compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc";
-			interrupt-controller;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml
new file mode 100644
index 000000000000..83256cc0bd5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,cpu-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Hart-Level Interrupt Controller (HLIC)
+
+description:
+  RISC-V cores include Control Status Registers (CSRs) which are local to
+  each CPU core (HART in RISC-V terminology) and can be read or written by
+  software. Some of these CSRs are used to control local interrupts connected
+  to the core. Every interrupt is ultimately routed through a hart's HLIC
+  before it interrupts that hart.
+
+  The RISC-V supervisor ISA manual specifies three interrupt sources that are
+  attached to every HLIC namely software interrupts, the timer interrupt, and
+  external interrupts. Software interrupts are used to send IPIs between
+  cores.  The timer interrupt comes from an architecturally mandated real-
+  time timer that is controlled via Supervisor Binary Interface (SBI) calls
+  and CSR reads. External interrupts connect all other device interrupts to
+  the HLIC, which are routed via the platform-level interrupt controller
+  (PLIC).
+
+  All RISC-V systems that conform to the supervisor ISA specification are
+  required to have a HLIC with these three interrupt sources present.  Since
+  the interrupt map is defined by the ISA it's not listed in the HLIC's device
+  tree entry, though external interrupt controllers (like the PLIC, for
+  example) will need to define how their interrupts map to the relevant HLICs.
+  This means a PLIC interrupt property will typically list the HLICs for all
+  present HARTs in the system.
+
+maintainers:
+  - Palmer Dabbelt <palmer@dabbelt.com>
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: andestech,cpu-intc
+          - const: riscv,cpu-intc
+      - const: riscv,cpu-intc
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+    description: |
+      The interrupt sources are defined by the RISC-V supervisor ISA manual,
+      with only the following three interrupts being defined for
+      supervisor mode:
+        - Source 1 is the supervisor software interrupt, which can be sent by
+          an SBI call and is reserved for use by software.
+        - Source 5 is the supervisor timer interrupt, which can be configured
+          by SBI calls and implements a one-shot timer.
+        - Source 9 is the supervisor external interrupt, which chains to all
+          other device interrupts.
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        #interrupt-cells = <1>;
+        compatible = "riscv,cpu-intc";
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
new file mode 100644
index 000000000000..c23b5c09fdb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,imsics.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,imsics.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Incoming MSI Controller (IMSIC)
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V advanced interrupt architecture (AIA) defines a per-CPU incoming
+  MSI controller (IMSIC) for handling MSIs in a RISC-V platform. The RISC-V
+  AIA specification can be found at https://github.com/riscv/riscv-aia.
+
+  The IMSIC is a per-CPU (or per-HART) device with separate interrupt file
+  for each privilege level (machine or supervisor). The configuration of
+  a IMSIC interrupt file is done using AIA CSRs and it also has a 4KB MMIO
+  space to receive MSIs from devices. Each IMSIC interrupt file supports a
+  fixed number of interrupt identities (to distinguish MSIs from devices)
+  which is same for given privilege level across CPUs (or HARTs).
+
+  The device tree of a RISC-V platform will have one IMSIC device tree node
+  for each privilege level (machine or supervisor) which collectively describe
+  IMSIC interrupt files at that privilege level across CPUs (or HARTs).
+
+  The arrangement of IMSIC interrupt files in MMIO space of a RISC-V platform
+  follows a particular scheme defined by the RISC-V AIA specification. A IMSIC
+  group is a set of IMSIC interrupt files co-located in MMIO space and we can
+  have multiple IMSIC groups (i.e. clusters, sockets, chiplets, etc) in a
+  RISC-V platform. The MSI target address of a IMSIC interrupt file at given
+  privilege level (machine or supervisor) encodes group index, HART index,
+  and guest index (shown below).
+
+  XLEN-1            > (HART Index MSB)                  12    0
+  |                  |                                  |     |
+  -------------------------------------------------------------
+  |xxxxxx|Group Index|xxxxxxxxxxx|HART Index|Guest Index|  0  |
+  -------------------------------------------------------------
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qemu,imsics
+      - const: riscv,imsics
+
+  reg:
+    minItems: 1
+    maxItems: 16384
+    description:
+      Base address of each IMSIC group.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 0
+
+  msi-controller: true
+
+  "#msi-cells":
+    const: 0
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 16384
+    description:
+      This property represents the set of CPUs (or HARTs) for which given
+      device tree node describes the IMSIC interrupt files. Each node pointed
+      to should be a riscv,cpu-intc node, which has a CPU node (i.e. RISC-V
+      HART) as parent.
+
+  riscv,num-ids:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 63
+    maximum: 2047
+    description:
+      Number of interrupt identities supported by IMSIC interrupt file.
+
+  riscv,num-guest-ids:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 63
+    maximum: 2047
+    description:
+      Number of interrupt identities are supported by IMSIC guest interrupt
+      file. When not specified it is assumed to be same as specified by the
+      riscv,num-ids property.
+
+  riscv,guest-index-bits:
+    minimum: 0
+    maximum: 7
+    default: 0
+    description:
+      Number of guest index bits in the MSI target address.
+
+  riscv,hart-index-bits:
+    minimum: 0
+    maximum: 15
+    description:
+      Number of HART index bits in the MSI target address. When not
+      specified it is calculated based on the interrupts-extended property.
+
+  riscv,group-index-bits:
+    minimum: 0
+    maximum: 7
+    default: 0
+    description:
+      Number of group index bits in the MSI target address.
+
+  riscv,group-index-shift:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 55
+    default: 24
+    description:
+      The least significant bit position of the group index bits in the
+      MSI target address.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - msi-controller
+  - "#msi-cells"
+  - interrupts-extended
+  - riscv,num-ids
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // Example 1 (Machine-level IMSIC files with just one group):
+
+    interrupt-controller@24000000 {
+      compatible = "qemu,imsics", "riscv,imsics";
+      interrupts-extended = <&cpu1_intc 11>,
+                            <&cpu2_intc 11>,
+                            <&cpu3_intc 11>,
+                            <&cpu4_intc 11>;
+      reg = <0x24000000 0x4000>;
+      interrupt-controller;
+      #interrupt-cells = <0>;
+      msi-controller;
+      #msi-cells = <0>;
+      riscv,num-ids = <127>;
+    };
+
+  - |
+    // Example 2 (Supervisor-level IMSIC files with two groups):
+
+    interrupt-controller@28000000 {
+      compatible = "qemu,imsics", "riscv,imsics";
+      interrupts-extended = <&cpu1_intc 9>,
+                            <&cpu2_intc 9>,
+                            <&cpu3_intc 9>,
+                            <&cpu4_intc 9>;
+      reg = <0x28000000 0x2000>, /* Group0 IMSICs */
+            <0x29000000 0x2000>; /* Group1 IMSICs */
+      interrupt-controller;
+      #interrupt-cells = <0>;
+      msi-controller;
+      #msi-cells = <0>;
+      riscv,num-ids = <127>;
+      riscv,group-index-bits = <1>;
+      riscv,group-index-shift = <24>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,rpmi-mpxy-system-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,rpmi-mpxy-system-msi.yaml
new file mode 100644
index 000000000000..1991f5c7446a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,rpmi-mpxy-system-msi.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,rpmi-mpxy-system-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V RPMI system MSI service group based message proxy
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V Platform Management Interface (RPMI) [1] defines a
+  messaging protocol which is modular and extensible. The supervisor
+  software can send/receive RPMI messages via SBI MPXY extension [2]
+  or some dedicated supervisor-mode RPMI transport.
+
+  The RPMI specification [1] defines system MSI service group which
+  allow application processors to receive MSIs upon system events
+  such as P2A doorbell, graceful shutdown/reboot request, CPU hotplug
+  event, memory hotplug event, etc from the platform microcontroller.
+  The SBI implementation (machine mode firmware or hypervisor) can
+  implement an SBI MPXY channel to allow RPMI system MSI service
+  group access to the supervisor software.
+
+  ===========================================
+  References
+  ===========================================
+
+  [1] RISC-V Platform Management Interface (RPMI) v1.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-rpmi/releases
+
+  [2] RISC-V Supervisor Binary Interface (SBI) v3.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-sbi-doc/releases
+
+properties:
+  compatible:
+    description:
+      Intended for use by the SBI implementation.
+    const: riscv,rpmi-mpxy-system-msi
+
+  mboxes:
+    maxItems: 1
+    description:
+      Mailbox channel of the underlying RPMI transport.
+
+  riscv,sbi-mpxy-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The SBI MPXY channel id to be used for providing RPMI access to
+      the supervisor software.
+
+required:
+  - compatible
+  - mboxes
+  - riscv,sbi-mpxy-channel-id
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "riscv,rpmi-mpxy-system-msi";
+        mboxes = <&rpmi_shmem_mbox 0x2>;
+        riscv,sbi-mpxy-channel-id = <0x2000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,rpmi-system-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,rpmi-system-msi.yaml
new file mode 100644
index 000000000000..b10a0532e586
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,rpmi-system-msi.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/riscv,rpmi-system-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V RPMI system MSI service group based interrupt controller
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V Platform Management Interface (RPMI) [1] defines a
+  messaging protocol which is modular and extensible. The supervisor
+  software can send/receive RPMI messages via SBI MPXY extension [2]
+  or some dedicated supervisor-mode RPMI transport.
+
+  The RPMI specification [1] defines system MSI service group which
+  allow application processors to receive MSIs upon system events
+  such as P2A doorbell, graceful shutdown/reboot request, CPU hotplug
+  event, memory hotplug event, etc from the platform microcontroller.
+  The supervisor software can access RPMI system MSI service group via
+  SBI MPXY channel or some dedicated supervisor-mode RPMI transport.
+
+  ===========================================
+  References
+  ===========================================
+
+  [1] RISC-V Platform Management Interface (RPMI) v1.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-rpmi/releases
+
+  [2] RISC-V Supervisor Binary Interface (SBI) v3.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-sbi-doc/releases
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    description:
+      Intended for use by the supervisor software.
+    const: riscv,rpmi-system-msi
+
+  mboxes:
+    maxItems: 1
+    description:
+      Mailbox channel of the underlying RPMI transport or SBI message proxy channel.
+
+  msi-parent: true
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+required:
+  - compatible
+  - mboxes
+  - msi-parent
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "riscv,rpmi-system-msi";
+        mboxes = <&mpxy_mbox 0x2000 0x0>;
+        msi-parent = <&imsic_slevel>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
index d631b7589d50..72456a07dac9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung Exynos SoC Interrupt Combiner Controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   Samsung's Exynos4 architecture includes a interrupt combiner controller which
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
deleted file mode 100644
index c54c5a9a2a90..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Samsung S3C24XX Interrupt Controllers
-
-The S3C24XX SoCs contain a custom set of interrupt controllers providing a
-varying number of interrupt sources. The set consists of a main- and sub-
-controller and on newer SoCs even a second main controller.
-
-Required properties:
-- compatible: Compatible property value should be "samsung,s3c2410-irq"
-  for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later.
-
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-
-- interrupt-controller : Identifies the node as an interrupt controller
-
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 4 and interrupt descriptor shall
-  have the following format:
-      <ctrl_num parent_irq ctrl_irq type>
-
-  ctrl_num contains the controller to use:
-      - 0 ... main controller
-      - 1 ... sub controller
-      - 2 ... second main controller on s3c2416 and s3c2450
-  parent_irq contains the parent bit in the main controller and will be
-             ignored in main controllers
-  ctrl_irq contains the interrupt bit of the controller
-  type contains the trigger type to use
-
-Example:
-
-	interrupt-controller@4a000000 {
-		compatible = "samsung,s3c2410-irq";
-		reg = <0x4a000000 0x100>;
-		interrupt-controller;
-		#interrupt-cells=<4>;
-	};
-
-	[...]
-
-	serial@50000000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50000000 0x4000>;
-		interrupt-parent = <&subintc>;
-		interrupts = <1 28 0 4>, <1 28 1 4>;
-	};
-
-	rtc@57000000 {
-		compatible = "samsung,s3c2410-rtc";
-		reg = <0x57000000 0x100>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 30 0 3>, <0 8 0 3>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 08d5a57ce00f..388fc2c620c0 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -26,27 +26,66 @@ description:
   with priority below this threshold will not cause the PLIC to raise its
   interrupt line leading to the context.
 
-  While the PLIC supports both edge-triggered and level-triggered interrupts,
-  interrupt handlers are oblivious to this distinction and therefore it is not
-  specified in the PLIC device-tree binding.
+  The PLIC supports both edge-triggered and level-triggered interrupts. For
+  edge-triggered interrupts, the RISC-V PLIC spec allows two responses to edges
+  seen while an interrupt handler is active; the PLIC may either queue them or
+  ignore them. In the first case, handlers are oblivious to the trigger type, so
+  it is not included in the interrupt specifier. In the second case, software
+  needs to know the trigger type, so it can reorder the interrupt flow to avoid
+  missing interrupts. This special handling is needed by at least the Renesas
+  RZ/Five SoC (AX45MP AndesCore with a NCEPLIC100) and the T-HEAD C900 PLIC.
 
   While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
   "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
   contains a specific memory layout, which is documented in chapter 8 of the
   SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
 
+  The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the
+  T-HEAD PLIC implementation requires setting a delegation bit to allow access
+  from S-mode. So add thead,c900-plic to distinguish them.
+
 maintainers:
-  - Sagar Kadam <sagar.kadam@sifive.com>
   - Paul Walmsley  <paul.walmsley@sifive.com>
   - Palmer Dabbelt <palmer@dabbelt.com>
 
 properties:
   compatible:
-    items:
-      - enum:
-          - sifive,fu540-c000-plic
-          - canaan,k210-plic
-      - const: sifive,plic-1.0.0
+    oneOf:
+      - items:
+          - enum:
+              - andestech,qilai-plic
+              - renesas,r9a07g043-plic
+          - const: andestech,nceplic100
+      - items:
+          - enum:
+              - anlogic,dr1v90-plic
+              - canaan,k210-plic
+              - eswin,eic7700-plic
+              - microchip,pic64gx-plic
+              - sifive,fu540-c000-plic
+              - spacemit,k1-plic
+              - starfive,jh7100-plic
+              - starfive,jh7110-plic
+              - tenstorrent,blackhole-plic
+          - const: sifive,plic-1.0.0
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-plic
+              - sophgo,cv1800b-plic
+              - sophgo,cv1812h-plic
+              - sophgo,sg2002-plic
+              - sophgo,sg2042-plic
+              - sophgo,sg2044-plic
+              - thead,th1520-plic
+          - const: thead,c900-plic
+      - items:
+          - const: ultrarisc,dp1000-plic
+          - const: ultrarisc,cp100-plic
+      - items:
+          - const: sifive,plic-1.0.0
+          - const: riscv,plic0
+        deprecated: true
+        description: For the QEMU virt machine only
 
   reg:
     maxItems: 1
@@ -54,23 +93,29 @@ properties:
   '#address-cells':
     const: 0
 
-  '#interrupt-cells':
-    const: 1
+  '#interrupt-cells': true
 
   interrupt-controller: true
 
   interrupts-extended:
     minItems: 1
+    maxItems: 15872
     description:
       Specifies which contexts are connected to the PLIC, with "-1" specifying
       that a context is not present. Each node pointed to should be a
       riscv,cpu-intc node, which has a riscv node as parent.
 
   riscv,ndev:
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Specifies how many external interrupts are supported by this controller.
 
+  clocks: true
+
+  power-domains: true
+
+  resets: true
+
 required:
   - compatible
   - '#address-cells'
@@ -80,6 +125,47 @@ required:
   - interrupts-extended
   - riscv,ndev
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - andestech,nceplic100
+              - thead,c900-plic
+
+    then:
+      properties:
+        '#interrupt-cells':
+          const: 2
+
+    else:
+      properties:
+        '#interrupt-cells':
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-plic
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        power-domains:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+      required:
+        - clocks
+        - power-domains
+        - resets
+
 additionalProperties: false
 
 examples:
@@ -89,12 +175,11 @@ examples:
       #interrupt-cells = <1>;
       compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
       interrupt-controller;
-      interrupts-extended = <
-        &cpu0_intc 11
-        &cpu1_intc 11 &cpu1_intc 9
-        &cpu2_intc 11 &cpu2_intc 9
-        &cpu3_intc 11 &cpu3_intc 9
-        &cpu4_intc 11 &cpu4_intc 9>;
+      interrupts-extended = <&cpu0_intc 11>,
+                            <&cpu1_intc 11>, <&cpu1_intc 9>,
+                            <&cpu2_intc 11>, <&cpu2_intc 9>,
+                            <&cpu3_intc 11>, <&cpu3_intc 9>,
+                            <&cpu4_intc 11>, <&cpu4_intc 9>;
       reg = <0xc000000 0x4000000>;
       riscv,ndev = <10>;
     };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt
deleted file mode 100644
index 9a5d562435ea..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* ARC700 incore Interrupt Controller
-
-  The core interrupt controller provides 32 prioritised interrupts (2 levels)
-  to ARC700 core.
-
-Properties:
-
-- compatible: "snps,arc700-intc"
-- interrupt-controller: This is an interrupt controller.
-- #interrupt-cells: Must be <1>.
-
-  Single Cell "interrupts" property of a device specifies the IRQ number
-  between 0 to 31
-
-  intc accessed via the special ARC AUX register interface, hence "reg" property
-  is not specified.
-
-Example:
-
-	intc: interrupt-controller {
-		compatible = "snps,arc700-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.yaml
new file mode 100644
index 000000000000..000a734d997c
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/snps,arc700-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARC700 incore Interrupt Controller
+
+maintainers:
+  - Vineet Gupta <vgupta@kernel.org>
+
+description: >
+  The core interrupt controller provides 32 prioritized interrupts (2 levels)
+  to ARC700 core.
+
+  intc accessed via the special ARC AUX register interface, hence "reg" property
+  is not specified.
+
+properties:
+  compatible:
+    const: snps,arc700-intc
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: An interrupt number 0-31
+    const: 1
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "snps,arc700-intc";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
deleted file mode 100644
index a5c1db95b3ec..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* ARC-HS Interrupt Distribution Unit
-
-  This optional 2nd level interrupt controller can be used in SMP configurations
-  for dynamic IRQ routing, load balancing of common/external IRQs towards core
-  intc.
-
-Properties:
-
-- compatible: "snps,archs-idu-intc"
-- interrupt-controller: This is an interrupt controller.
-- #interrupt-cells: Must be <1> or <2>.
-
-  Value of the first cell specifies the "common" IRQ from peripheral to IDU.
-  Number N of the particular interrupt line of IDU corresponds to the line N+24
-  of the core interrupt controller.
-
-  The (optional) second cell specifies any of the following flags:
-    - bits[3:0] trigger type and level flags
-        1 = low-to-high edge triggered
-        2 = NOT SUPPORTED (high-to-low edge triggered)
-        4 = active high level-sensitive <<< DEFAULT
-        8 = NOT SUPPORTED (active low level-sensitive)
-  When no second cell is specified, the interrupt is assumed to be level
-  sensitive.
-
-  The interrupt controller is accessed via the special ARC AUX register
-  interface, hence "reg" property is not specified.
-
-Example:
-	core_intc: core-interrupt-controller {
-		compatible = "snps,archs-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
-
-	idu_intc: idu-interrupt-controller {
-		compatible = "snps,archs-idu-intc";
-		interrupt-controller;
-		interrupt-parent = <&core_intc>;
-		#interrupt-cells = <1>;
-	};
-
-	some_device: serial@c0fc1000 {
-		interrupt-parent = <&idu_intc>;
-		interrupts = <0>;	/* upstream idu IRQ #24 */
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml
new file mode 100644
index 000000000000..286a964f23e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/snps,archs-idu-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARC-HS Interrupt Distribution Unit
+
+maintainers:
+  - Vineet Gupta <vgupta@kernel.org>
+
+description: >
+  ARC-HS Interrupt Distribution Unit is an optional 2nd level interrupt
+  controller which can be used in SMP configurations for dynamic IRQ routing,
+  load balancing of common/external IRQs towards core intc.
+
+  The interrupt controller is accessed via the special ARC AUX register
+  interface, hence "reg" property is not specified.
+
+properties:
+  compatible:
+    const: snps,archs-idu-intc
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: |
+      Number of interrupt specifier cells:
+        - 1: only a common IRQ is specified.
+        - 2: a second cell encodes trigger type and level flags:
+            1 = low-to-high edge triggered
+            4 = active high level-sensitive (default)
+    enum: [1, 2]
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "snps,archs-idu-intc";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt
deleted file mode 100644
index 69f326d6a5ad..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* ARC-HS incore Interrupt Controller (Provided by cores implementing ARCv2 ISA)
-
-Properties:
-
-- compatible: "snps,archs-intc"
-- interrupt-controller: This is an interrupt controller.
-- #interrupt-cells: Must be <1>.
-
-  Single Cell "interrupts" property of a device specifies the IRQ number
-  between 16 to 256
-
-  intc accessed via the special ARC AUX register interface, hence "reg" property
-  is not specified.
-
-Example:
-
-	intc: interrupt-controller {
-		compatible = "snps,archs-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupts = <16 17 18 19 20 21 22 23 24 25>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.yaml
new file mode 100644
index 000000000000..9d248ef7fe3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/snps,archs-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARC-HS incore Interrupt Controller
+
+maintainers:
+  - Vineet Gupta <vgupta@kernel.org>
+
+description:
+  ARC-HS incore Interrupt Controller provided by cores implementing ARCv2 ISA.
+  intc accessed via the special ARC AUX register interface, hence "reg" property
+  is not specified.
+
+properties:
+  compatible:
+    const: snps,archs-intc
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupts:
+    description: List of IRQ numbers between 16 and 256
+    items:
+      items:
+        - minimum: 16
+          maximum: 256
+
+required:
+  - compatible
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller {
+        compatible = "snps,archs-intc";
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <16>, <17>, <18>, <19>, <20>, <21>, <22>, <23>, <24>, <25>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
deleted file mode 100644
index 2db59df9408f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
-
-Synopsys DesignWare provides interrupt controller IP for APB known as
-dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
-APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
-controller in some SoCs, e.g. Hisilicon SD5203.
-
-Required properties:
-- compatible: shall be "snps,dw-apb-ictl"
-- reg: physical base address of the controller and length of memory mapped
-  region starting with ENABLE_LOW register
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
-
-Additional required property when it's used as secondary interrupt controller:
-- interrupts: interrupt reference to primary interrupt controller
-
-The interrupt sources map to the corresponding bits in the interrupt
-registers, i.e.
-- 0 maps to bit 0 of low interrupts,
-- 1 maps to bit 1 of low interrupts,
-- 32 maps to bit 0 of high interrupts,
-- 33 maps to bit 1 of high interrupts,
-- (optional) fast interrupts start at 64.
-
-Example:
-	/* dw_apb_ictl is used as secondary interrupt controller */
-	aic: interrupt-controller@3000 {
-		compatible = "snps,dw-apb-ictl";
-		reg = <0x3000 0xc00>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	/* dw_apb_ictl is used as primary interrupt controller */
-	vic: interrupt-controller@10130000 {
-		compatible = "snps,dw-apb-ictl";
-		reg = <0x10130000 0x1000>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
new file mode 100644
index 000000000000..6b59b600a037
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/snps,dw-apb-ictl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare APB interrupt controller
+
+maintainers:
+  - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+  - Zhen Lei <thunder.leizhen@huawei.com>
+
+description:
+  Synopsys DesignWare provides interrupt controller IP for APB known as
+  dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs
+  with APB bus, e.g. Marvell Armada 1500. It can also be used as primary
+  interrupt controller in some SoCs, e.g. Hisilicon SD5203.
+
+properties:
+  compatible:
+    const: snps,dw-apb-ictl
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+    description: >
+      Interrupt input connected to the primary interrupt controller when used
+      as a secondary controller. The interrupt specifier maps to bits in the
+      low and high interrupt registers (0⇒bit 0 low, 1⇒bit 1 low, 32⇒bit 0 high,
+      33⇒bit 1 high, fast interrupts start at 64).
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@3000 {
+        compatible = "snps,dw-apb-ictl";
+        reg = <0x3000 0xc00>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+    };
+  - |
+    interrupt-controller@10130000 {
+        compatible = "snps,dw-apb-ictl";
+        reg = <0x10130000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
deleted file mode 100644
index dac0846fe789..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Socionext SynQuacer External Interrupt Unit (EXIU)
-
-The Socionext Synquacer SoC has an external interrupt unit (EXIU)
-that forwards a block of 32 configurable input lines to 32 adjacent
-level-high type GICv3 SPIs.
-
-Required properties:
-
-- compatible           : Should be "socionext,synquacer-exiu".
-- reg                  : Specifies base physical address and size of the
-                         control registers.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells     : Specifies the number of cells needed to encode an
-                         interrupt source. The value must be 3.
-- socionext,spi-base   : The SPI number of the first SPI of the 32 adjacent
-                         ones the EXIU forwards its interrups to.
-
-Notes:
-
-- Only SPIs can use the EXIU as an interrupt parent.
-
-Example:
-
-	exiu: interrupt-controller@510c0000 {
-		compatible = "socionext,synquacer-exiu";
-		reg = <0x0 0x510c0000 0x0 0x20>;
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		#interrupt-cells = <3>;
-		socionext,spi-base = <112>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.yaml
new file mode 100644
index 000000000000..92cec2255cca
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/socionext,synquacer-exiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext SynQuacer External Interrupt Unit (EXIU)
+
+maintainers:
+  - Ard Biesheuvel <ardb@kernel.org>
+
+description: |+
+  The Socionext SynQuacer SoC has an external interrupt unit (EXIU)
+  that forwards a block of 32 configurable input lines to 32 adjacent
+  level-high type GICv3 SPIs.
+
+properties:
+  compatible:
+    const: socionext,synquacer-exiu
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 3
+
+  interrupt-controller: true
+
+  socionext,spi-base:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The SPI number of the first SPI of the 32 adjacent ones the
+      EXIU forwards its interrupts to.
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - socionext,spi-base
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@510c0000 {
+        compatible = "socionext,synquacer-exiu";
+        reg = <0x510c0000 0x20>;
+        interrupt-controller;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <3>;
+        socionext,spi-base = <112>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
index f89ebde76dab..de7c5e59bae1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
@@ -30,6 +30,7 @@ properties:
       - socionext,uniphier-ld11-aidet
       - socionext,uniphier-ld20-aidet
       - socionext,uniphier-pxs3-aidet
+      - socionext,uniphier-nx1-aidet
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sophgo,sg2042-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/sophgo,sg2042-msi.yaml
new file mode 100644
index 000000000000..f6b8b1d92f79
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sophgo,sg2042-msi.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sophgo,sg2042-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo SG2042 MSI Controller
+
+maintainers:
+  - Chen Wang <unicorn_wang@outlook.com>
+
+description:
+  This interrupt controller is in Sophgo SG2042 for transforming interrupts from
+  PCIe MSI to PLIC interrupts.
+
+allOf:
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sophgo,sg2042-msi
+      - sophgo,sg2044-msi
+
+  reg:
+    items:
+      - description: clear register
+      - description: msi doorbell address
+
+  reg-names:
+    items:
+      - const: clr
+      - const: doorbell
+
+  msi-controller: true
+
+  msi-ranges:
+    maxItems: 1
+
+  "#msi-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - msi-controller
+  - msi-ranges
+  - "#msi-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    msi-controller@30000000 {
+      compatible = "sophgo,sg2042-msi";
+      reg = <0x30000000 0x4>, <0x30000008 0x4>;
+      reg-names = "clr", "doorbell";
+      msi-controller;
+      #msi-cells = <0>;
+      msi-ranges = <&plic 64 IRQ_TYPE_LEVEL_HIGH 32>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml
new file mode 100644
index 000000000000..27d36173366a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,spear300-shirq.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/st,spear300-shirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPEAr3xx Shared IRQ controller
+
+maintainers:
+  - Viresh Kumar <vireshk@kernel.org>
+  - Shiraz Hashim <shiraz.linux.kernel@gmail.com>
+
+description: |
+  SPEAr3xx architecture includes shared/multiplexed irqs for certain set of
+  devices. The multiplexor provides a single interrupt to parent interrupt
+  controller (VIC) on behalf of a group of devices.
+
+  There can be multiple groups available on SPEAr3xx variants but not exceeding
+  4. The number of devices in a group can differ, further they may share same
+  set of status/mask registers spanning across different bit masks. Also in some
+  cases the group may not have enable or other registers. This makes software
+  little complex.
+
+  A single node in the device tree is used to describe the shared interrupt
+  multiplexer (one node for all groups). A group in the interrupt controller
+  shares config/control registers with other groups. For example, a 32-bit
+  interrupt enable/disable config register can accommodate up to 4 interrupt
+  groups.
+
+properties:
+  compatible:
+    enum:
+      - st,spear300-shirq
+      - st,spear310-shirq
+      - st,spear320-shirq
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    description: Interrupt specifier array for SHIRQ groups
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@b3000000 {
+        compatible = "st,spear320-shirq";
+        reg = <0xb3000000 0x1000>;
+        interrupts = <28 29 30 1>;
+        #interrupt-cells = <1>;
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt b/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
deleted file mode 100644
index a407c499b3cc..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* SPEAr Shared IRQ layer (shirq)
-
-SPEAr3xx architecture includes shared/multiplexed irqs for certain set
-of devices. The multiplexor provides a single interrupt to parent
-interrupt controller (VIC) on behalf of a group of devices.
-
-There can be multiple groups available on SPEAr3xx variants but not
-exceeding 4. The number of devices in a group can differ, further they
-may share same set of status/mask registers spanning across different
-bit masks. Also in some cases the group may not have enable or other
-registers. This makes software little complex.
-
-A single node in the device tree is used to describe the shared
-interrupt multiplexor (one node for all groups). A group in the
-interrupt controller shares config/control registers with other groups.
-For example, a 32-bit interrupt enable/disable config register can
-accommodate up to 4 interrupt groups.
-
-Required properties:
-  - compatible: should be, either of
-     - "st,spear300-shirq"
-     - "st,spear310-shirq"
-     - "st,spear320-shirq"
-  - interrupt-controller: Identifies the node as an interrupt controller.
-  - #interrupt-cells: should be <1> which basically contains the offset
-    (starting from 0) of interrupts for all the groups.
-  - reg: Base address and size of shirq registers.
-  - interrupts: The list of interrupts generated by the groups which are
-    then connected to a parent interrupt controller. Each group is
-    associated with one of the interrupts, hence number of interrupts (to
-    parent) is equal to number of groups. The format of the interrupt
-    specifier depends in the interrupt parent controller.
-
-Example:
-
-The following is an example from the SPEAr320 SoC dtsi file.
-
-shirq: interrupt-controller@b3000000 {
-	compatible = "st,spear320-shirq";
-	reg = <0xb3000000 0x1000>;
-	interrupts = <28 29 30 1>;
-	#interrupt-cells = <1>;
-	interrupt-controller;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt b/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt
deleted file mode 100644
index ced6014061a3..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-STMicroelectronics STi System Configuration Controlled IRQs
------------------------------------------------------------
-
-On STi based systems; External, CTI (Core Sight), PMU (Performance Management),
-and PL310 L2 Cache IRQs are controlled using System Configuration registers.
-This driver is used to unmask them prior to use.
-
-Required properties:
-- compatible	: Should be set to one of:
-			"st,stih415-irq-syscfg"
-			"st,stih416-irq-syscfg"
-			"st,stih407-irq-syscfg"
-			"st,stid127-irq-syscfg"
-- st,syscfg	: Phandle to Cortex-A9 IRQ system config registers
-- st,irq-device	: Array of IRQs to enable - should be 2 in length
-- st,fiq-device	: Array of FIQs to enable - should be 2 in length
-
-Optional properties:
-- st,invert-ext	: External IRQs can be inverted at will.  This property inverts
-		  these IRQs using bitwise logic.  A number of defines have been
-		  provided for convenience:
-			ST_IRQ_SYSCFG_EXT_1_INV
-			ST_IRQ_SYSCFG_EXT_2_INV
-			ST_IRQ_SYSCFG_EXT_3_INV
-Example:
-
-irq-syscfg {
-	compatible    = "st,stih416-irq-syscfg";
-	st,syscfg     = <&syscfg_cpu>;
-	st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
-			<ST_IRQ_SYSCFG_PMU_1>;
-	st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
-			<ST_IRQ_SYSCFG_DISABLED>;
-	st,invert-ext = <(ST_IRQ_SYSCFG_EXT_1_INV | ST_IRQ_SYSCFG_EXT_3_INV)>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
new file mode 100644
index 000000000000..e44e4e5708a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stih407-irq-syscfg.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/st,stih407-irq-syscfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi System Configuration Controlled IRQs
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+description:
+  On STi based systems; External, CTI (Core Sight), PMU (Performance
+  Management), and PL310 L2 Cache IRQs are controlled using System
+  Configuration registers.  This device is used to unmask them prior to use.
+
+properties:
+  compatible:
+    const: st,stih407-irq-syscfg
+
+  st,syscfg:
+    description: Phandle to Cortex-A9 IRQ system config registers
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  st,irq-device:
+    description: Array of IRQs to enable.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: Enable the IRQ of the channel one.
+      - description: Enable the IRQ of the channel two.
+
+  st,fiq-device:
+    description: Array of FIQs to enable.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: Enable the IRQ of the channel one.
+      - description: Enable the IRQ of the channel two.
+
+  st,invert-ext:
+    description: External IRQs can be inverted at will. This property inverts
+      these three IRQs using bitwise logic, each one being encoded respectively
+      on the first, second and fourth bit.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1, 2, 3, 4, 5, 6 ]
+
+required:
+  - compatible
+  - st,syscfg
+  - st,irq-device
+  - st,fiq-device
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq-st.h>
+    irq-syscfg {
+        compatible = "st,stih407-irq-syscfg";
+        st,syscfg = <&syscfg_cpu>;
+        st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+                        <ST_IRQ_SYSCFG_PMU_1>;
+        st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+                        <ST_IRQ_SYSCFG_DISABLED>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
index d19c881b4abc..9967e57b449b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STM32 External Interrupt Controller Device Tree Bindings
+title: STM32 External Interrupt Controller
 
 maintainers:
   - Alexandre Torgue <alexandre.torgue@foss.st.com>
@@ -20,6 +20,7 @@ properties:
       - items:
           - enum:
               - st,stm32mp1-exti
+              - st,stm32mp13-exti
           - const: syscon
 
   "#interrupt-cells":
@@ -88,8 +89,23 @@ examples:
         reg = <0x5000d000 0x400>;
     };
 
+  - |
     //Example 2
-    exti2: interrupt-controller@40013c00 {
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    exti2: interrupt-controller@5000d000 {
+        compatible = "st,stm32mp1-exti", "syscon";
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        reg = <0x5000d000 0x400>;
+        interrupts-extended =
+            <&intc GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+            <0>,
+            <&intc GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+    };
+
+  - |
+    //Example 3
+    exti3: interrupt-controller@40013c00 {
         compatible = "st,stm32-exti";
         interrupt-controller;
         #interrupt-cells = <2>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml
new file mode 100644
index 000000000000..ada5788602d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/starfive,jh8100-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive External Interrupt Controller
+
+description:
+  StarFive SoC JH8100 contain a external interrupt controller. It can be used
+  to handle high-level input interrupt signals. It also send the output
+  interrupt signal to RISC-V PLIC.
+
+maintainers:
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh8100-intc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: APB clock for the interrupt controller
+    maxItems: 1
+
+  resets:
+    description: APB reset for the interrupt controller
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@12260000 {
+      compatible = "starfive,jh8100-intc";
+      reg = <0x12260000 0x10000>;
+      clocks = <&syscrg_ne 76>;
+      resets = <&syscrg_ne 13>;
+      interrupts = <45>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
new file mode 100644
index 000000000000..bd0021dbab0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sunplus,sp7021-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Interrupt Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    items:
+      - const: sunplus,sp7021-intc
+
+  reg:
+    maxItems: 2
+    description:
+      Specifies base physical address(s) and size of the controller regs.
+      The 1st region include type/polarity/priority/mask regs.
+      The 2nd region include clear/masked_ext0/masked_ext1/group regs.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger
+      type as defined in interrupt.txt in this directory.
+
+  interrupts:
+    maxItems: 2
+    description:
+      EXT_INT0 & EXT_INT1, 2 interrupts references to primary interrupt
+      controller.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    intc: interrupt-controller@9c000780 {
+        compatible = "sunplus,sp7021-intc";
+        reg = <0x9c000780 0x80>, <0x9c000a80 0x80>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800-irqc.yaml
new file mode 100644
index 000000000000..f1a15d725cd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800-irqc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/technologic,ts4800-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TS-4800 FPGA Interrupt Controller
+
+maintainers:
+  - Damien Riegel <damien.riegel@savoirfairelinux.com>
+
+description:
+  TS-4800 FPGA has an internal interrupt controller. When one of the interrupts
+  is triggered, the SoC is notified, usually using a GPIO as parent interrupt
+  source.
+
+properties:
+  compatible:
+    const: technologic,ts4800-irqc
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@1000 {
+        compatible = "technologic,ts4800-irqc";
+        reg = <0x1000 0x80>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <10>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt b/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
deleted file mode 100644
index 341ae5909333..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/technologic,ts4800.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-TS-4800 FPGA interrupt controller
-
-TS-4800 FPGA has an internal interrupt controller. When one of the
-interrupts is triggered, the SoC is notified, usually using a GPIO as
-parent interrupt source.
-
-Required properties:
-- compatible: should be "technologic,ts4800-irqc"
-- interrupt-controller: identifies the node as an interrupt controller
-- reg: physical base address of the controller and length of memory mapped
-  region
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent controller
diff --git a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml
new file mode 100644
index 000000000000..62fd220e126e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/thead,c900-aclint-mswi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ACLINT Machine-level Software Interrupt Device
+
+maintainers:
+  - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sophgo,sg2042-aclint-mswi
+              - sophgo,sg2044-aclint-mswi
+          - const: thead,c900-aclint-mswi
+      - items:
+          - enum:
+              - anlogic,dr1v90-aclint-mswi
+          - const: nuclei,ux900-aclint-mswi
+
+  reg:
+    maxItems: 1
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 4095
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+
+examples:
+  - |
+    interrupt-controller@94000000 {
+      compatible = "sophgo,sg2042-aclint-mswi", "thead,c900-aclint-mswi";
+      interrupts-extended = <&cpu1intc 3>,
+                            <&cpu2intc 3>,
+                            <&cpu3intc 3>,
+                            <&cpu4intc 3>;
+      reg = <0x94000000 0x00010000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml
new file mode 100644
index 000000000000..d02c6886283a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/thead,c900-aclint-sswi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ACLINT Supervisor-level Software Interrupt Device
+
+maintainers:
+  - Inochi Amaoto <inochiama@outlook.com>
+
+description:
+  The SSWI device is a part of the ACLINT device. It provides
+  supervisor-level IPI functionality for a set of HARTs on a supported
+  platforms. It provides a register to set an IPI (SETSSIP) for each
+  HART connected to the SSWI device. See draft specification
+  https://github.com/riscvarchive/riscv-aclint
+
+  Following variants of the SSWI ACLINT supported, using dedicated
+  compatible string
+  - THEAD C900
+  - MIPS P8700
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sophgo,sg2044-aclint-sswi
+          - const: thead,c900-aclint-sswi
+      - items:
+          - const: mips,p8700-aclint-sswi
+      - items:
+          - enum:
+              - anlogic,dr1v90-aclint-sswi
+          - const: nuclei,ux900-aclint-sswi
+
+  reg:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 0
+
+  interrupt-controller: true
+
+  interrupts-extended:
+    minItems: 1
+    maxItems: 4095
+
+  riscv,hart-indexes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4095
+    description:
+      A list of hart indexes that APLIC should use to address each hart
+      that is mentioned in the "interrupts-extended"
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+  - interrupts-extended
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mips,p8700-aclint-sswi
+    then:
+      required:
+        - riscv,hart-indexes
+    else:
+      properties:
+        riscv,hart-indexes: false
+
+examples:
+  - |
+    //Example 1
+    interrupt-controller@94000000 {
+      compatible = "sophgo,sg2044-aclint-sswi", "thead,c900-aclint-sswi";
+      reg = <0x94000000 0x00004000>;
+      #interrupt-cells = <0>;
+      interrupt-controller;
+      interrupts-extended = <&cpu1intc 1>,
+                            <&cpu2intc 1>,
+                            <&cpu3intc 1>,
+                            <&cpu4intc 1>;
+    };
+
+  - |
+    //Example 2
+    interrupt-controller@94000000 {
+      compatible = "mips,p8700-aclint-sswi";
+      reg = <0x94000000 0x00004000>;
+      #interrupt-cells = <0>;
+      interrupt-controller;
+      interrupts-extended = <&cpu1intc 1>,
+                            <&cpu2intc 1>,
+                            <&cpu3intc 1>,
+                            <&cpu4intc 1>;
+      riscv,hart-indexes = <0x0 0x1 0x10 0x11>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt
deleted file mode 100644
index 597e8a089fe4..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* TI Common Platform Interrupt Controller
-
-Common Platform Interrupt Controller (cp_intc) is used on
-OMAP-L1x SoCs and can support several configurable number
-of interrupts.
-
-Main node required properties:
-
-- compatible : should be:
-	"ti,cp-intc"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The type shall be a <u32> and the value shall be 1.
-
-  The cell contains the interrupt number in the range [0-128].
-- ti,intc-size: Number of interrupts handled by the interrupt controller.
-- reg: physical base address and size of the intc registers map.
-
-Example:
-
-	intc: interrupt-controller@1 {
-		compatible = "ti,cp-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		ti,intc-size = <101>;
-		reg = <0xfffee000 0x2000>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.yaml
new file mode 100644
index 000000000000..77d018d20f9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,cp-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Common Platform Interrupt Controller
+
+maintainers:
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+  
+description:
+  Common Platform Interrupt Controller (cp_intc) is used on OMAP-L1x SoCs and
+  can support several configurable number of interrupts.
+
+properties:
+  compatible:
+    const: ti,cp-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+    description: Encodes an interrupt number in the range 0–128.
+
+  ti,intc-size:
+    description: Number of interrupts handled by the interrupt controller.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - ti,intc-size
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@fffee000 {
+        compatible = "ti,cp-intc";
+        reg = <0xfffee000 0x2000>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        ti,intc-size = <101>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
deleted file mode 100644
index 5f94d7739d8d..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Keystone 2 IRQ controller IP
-
-On Keystone SOCs, DSP cores can send interrupts to ARM
-host using the IRQ controller IP. It provides 28 IRQ signals to ARM.
-The IRQ handler running on HOST OS can identify DSP signal source by
-analyzing SRCCx bits in IPCARx registers. This is one of the component
-used by the IPC mechanism used on Keystone SOCs.
-
-Required Properties:
-- compatible: should be "ti,keystone-irq"
-- ti,syscon-dev : phandle and offset pair. The phandle to syscon used to
-			access device control registers and the offset inside
-			device control registers range.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode interrupt
-					 source should be 1.
-- interrupts: interrupt reference to primary interrupt controller
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Example:
-	kirq0: keystone_irq0@26202a0 {
-		compatible = "ti,keystone-irq";
-		ti,syscon-dev = <&devctrl 0x2a0>;
-		interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
-
-	dsp0: dsp0 {
-		compatible = "linux,rproc-user";
-		...
-		interrupt-parent = <&kirq0>;
-		interrupts = <10 2>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.yaml
new file mode 100644
index 000000000000..27d448d1786a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ti,keystone-irq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keystone 2 IRQ controller IP
+
+maintainers:
+  - Grygorii Strashko <grygorii.strashko@ti.com>
+
+description:
+  On Keystone SOCs, DSP cores can send interrupts to ARM host using the IRQ
+  controller IP. It provides 28 IRQ signals to ARM. The IRQ handler running on
+  HOST OS can identify DSP signal source by analyzing SRCCx bits in IPCARx
+  registers. This is one of the component used by the IPC mechanism used on
+  Keystone SOCs.
+
+properties:
+  compatible:
+    const: ti,keystone-irq
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,syscon-dev:
+    description: Phandle and offset to syscon device
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to syscon device control registers
+          - description: Offset to control register
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+  - ti,syscon-dev
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    interrupt-controller@2a0 {
+      compatible = "ti,keystone-irq";
+      reg = <0x2a0 0x4>;
+      ti,syscon-dev = <&devctrl 0x2a0>;
+      interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt
deleted file mode 100644
index 38ce5d037722..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Omap2/3 intc controller
-
-On TI omap2 and 3 the intc interrupt controller can provide
-96 or 128 IRQ signals to the ARM host depending on the SoC.
-
-Required Properties:
-- compatible: should be one of
-			"ti,omap2-intc"
-			"ti,omap3-intc"
-			"ti,dm814-intc"
-			"ti,dm816-intc"
-			"ti,am33xx-intc"
-
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode interrupt
-		     source, should be 1 for intc
-- interrupts: interrupt reference to primary interrupt controller
-
-Please refer to interrupts.txt in this directory for details of the common
-Interrupt Controllers bindings used by client devices.
-
-Example:
-	intc: interrupt-controller@48200000 {
-		compatible = "ti,omap3-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x48200000 0x1000>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.yaml
new file mode 100644
index 000000000000..cb118180621f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap-intc-irq.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,omap-intc-irq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI OMAP Interrupt Controller
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  On TI omap2 and 3 the intc interrupt controller can provide 96 or 128 IRQ
+  signals to the ARM host depending on the SoC.
+
+properties:
+  compatible:
+    enum:
+      - ti,omap2-intc
+      - ti,omap3-intc
+      - ti,dm814-intc
+      - ti,dm816-intc
+      - ti,am33xx-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@48200000 {
+        compatible = "ti,omap3-intc";
+        reg = <0x48200000 0x1000>;
+        interrupts = <32>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt
deleted file mode 100644
index f2583e6ec060..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* OMAP Interrupt Controller
-
-OMAP2/3 are using a TI interrupt controller that can support several
-configurable number of interrupts.
-
-Main node required properties:
-
-- compatible : should be:
-	"ti,omap2-intc"
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The type shall be a <u32> and the value shall be 1.
-
-  The cell contains the interrupt number in the range [0-128].
-- ti,intc-size: Number of interrupts handled by the interrupt controller.
-- reg: physical base address and size of the intc registers map.
-
-Example:
-
-	intc: interrupt-controller@1 {
-		compatible = "ti,omap2-intc";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		ti,intc-size = <96>;
-		reg = <0x48200000 0x1000>;
-	};
-
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
deleted file mode 100644
index 422d6908f8b2..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu
+++ /dev/null
@@ -1,31 +0,0 @@
-TI OMAP4 Wake-up Generator
-
-All TI OMAP4/5 (and their derivatives) an interrupt controller that
-routes interrupts to the GIC, and also serves as a wakeup source. It
-is also referred to as "WUGEN-MPU", hence the name of the binding.
-
-Required properties:
-
-- compatible : should contain at least "ti,omap4-wugen-mpu" or
-  "ti,omap5-wugen-mpu"
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value must be 3.
-
-Notes:
-
-- Because this HW ultimately routes interrupts to the GIC, the
-  interrupt specifier must be that of the GIC.
-- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
-  are explicitly forbidden.
-
-Example:
-
-       wakeupgen: interrupt-controller@48281000 {
-               compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
-               interrupt-controller;
-               #interrupt-cells = <3>;
-               reg = <0x48281000 0x1000>;
-               interrupt-parent = <&gic>;
-       };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml
new file mode 100644
index 000000000000..61b30a7732ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,omap4-wugen-mpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI OMAP4 Wake-up Generator
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: >
+  All TI OMAP4/5 (and their derivatives) are interrupt controllers that route
+  interrupts to the GIC, and also serve as wakeup sources. They are also
+  referred to as "WUGEN-MPU", hence the name of the binding.
+
+  Notes:
+
+    - Because this HW ultimately routes interrupts to the GIC, the interrupt
+      specifier must be that of the GIC.
+    - Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs are
+      explicitly forbidden.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: ti,omap5-wugen-mpu
+          - const: ti,omap4-wugen-mpu
+      - const: ti,omap4-wugen-mpu
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@48281000 {
+        compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
+        reg = <0x48281000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
index 65523d9459d8..3cd5a1822e14 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/interrupt-controller/ti,pruss-intc.yaml#
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
index 3d89668573e8..5449266f258a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
@@ -59,6 +59,9 @@ properties:
 
   interrupt-controller: true
 
+  '#interrupt-cells':
+    const: 0
+
   msi-controller: true
 
   ti,interrupt-ranges:
@@ -77,9 +80,14 @@ properties:
 
   ti,unmapped-event-sources:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Array of phandles to DMA controllers where the unmapped events originate.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -101,6 +109,7 @@ examples:
             compatible = "ti,sci-inta";
             reg = <0x0 0x33d00000 0x0 0x100000>;
             interrupt-controller;
+            #interrupt-cells = <0>;
             msi-controller;
             interrupt-parent = <&main_navss_intr>;
             ti,sci = <&dmsc>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
index e12aee42b126..c99cc7323c71 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
@@ -58,6 +58,9 @@ properties:
         1 = If intr supports edge triggered interrupts.
         4 = If intr supports level triggered interrupts.
 
+  reg:
+    maxItems: 1
+
   interrupt-controller: true
 
   '#interrupt-cells':
diff --git a/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt
deleted file mode 100644
index 0a4ce1051b02..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-VIA/Wondermedia VT8500 Interrupt Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-intc"
-- reg : Should contain 1 register ranges(address and length)
-- #interrupt-cells : should be <1>
-
-Example:
-
-	intc: interrupt-controller@d8140000 {
-		compatible = "via,vt8500-intc";
-		interrupt-controller;
-		reg = <0xd8140000 0x10000>;
-		#interrupt-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.yaml
new file mode 100644
index 000000000000..bc14c74bf7d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/via,vt8500-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VIA and WonderMedia SoCs Interrupt Controller
+
+description:
+  This is the interrupt controller used in single-core ARM SoCs made by
+  VIA and WonderMedia (up to and including WM8950). Each block handles
+  up to 64 interrupt sources (level or edge triggered) and can generate
+  up to 8 interrupts to its parent when used in a chained configuration.
+
+maintainers:
+  - Alexey Charkov <alchark@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: via,vt8500-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description:
+          Interrupt number raised by the IRQ0 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ1 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ2 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ3 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ4 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ5 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ6 output of this controller
+          Only used if this controller is chained
+      - description:
+          Interrupt number raised by the IRQ7 output of this controller
+          Only used if this controller is chained
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@d8140000 {
+        compatible = "via,vt8500-intc";
+        interrupt-controller;
+        reg = <0xd8140000 0x10000>;
+        #interrupt-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/xlnx,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/xlnx,intc.yaml
new file mode 100644
index 000000000000..b4f58ed25993
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/xlnx,intc.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/xlnx,intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Interrupt Controller
+
+maintainers:
+  - Michal Simek <michal.simek@amd.com>
+
+description:
+  The controller is a soft IP core that is configured at build time for the
+  number of interrupts and the type of each interrupt. These details cannot
+  be changed at run time.
+
+properties:
+  compatible:
+    const: xlnx,xps-intc-1.00.a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      Specifies the number of cells needed to encode an interrupt source.
+      The value shall be a minimum of 1. The Xilinx device trees typically
+      use 2 but the 2nd value is not used.
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+    description:
+      Specifies the interrupt of the parent controller from which it is chained.
+
+  xlnx,kind-of-intr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      A 32 bit value specifying the interrupt type for each possible interrupt
+      (1 = edge, 0 = level). The interrupt type typically comes in thru
+      the device tree node of the interrupt generating device, but in this case
+      the interrupt type is determined by the interrupt controller based on how
+      it was implemented.
+
+  xlnx,num-intr-inputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Specifies the number of interrupts supported by the specific
+      implementation of the controller.
+
+required:
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+  - xlnx,kind-of-intr
+  - xlnx,num-intr-inputs
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-controller@41800000 {
+      compatible = "xlnx,xps-intc-1.00.a";
+      reg = <0x41800000 0x10000>;
+      #interrupt-cells = <2>;
+      interrupt-controller;
+      xlnx,kind-of-intr = <0x1>;
+      xlnx,num-intr-inputs = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
index 5e125cf2a88b..a8409db4a3e3 100644
--- a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iommu/allwinner,sun50i-h6-iommu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H6 IOMMU Device Tree Bindings
+title: Allwinner H6 IOMMU
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -17,7 +17,12 @@ properties:
       The content of the cell is the master ID.
 
   compatible:
-    const: allwinner,sun50i-h6-iommu
+    oneOf:
+      - const: allwinner,sun50i-h6-iommu
+      - const: allwinner,sun50i-h616-iommu
+      - items:
+          - const: allwinner,sun55i-a523-iommu
+          - const: allwinner,sun50i-h616-iommu
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iommu/apple,dart.yaml b/Documentation/devicetree/bindings/iommu/apple,dart.yaml
index 94aa9e9afa59..47ec7fa52c3a 100644
--- a/Documentation/devicetree/bindings/iommu/apple,dart.yaml
+++ b/Documentation/devicetree/bindings/iommu/apple,dart.yaml
@@ -22,7 +22,15 @@ description: |+
 
 properties:
   compatible:
-    const: apple,t8103-dart
+    oneOf:
+      - enum:
+          - apple,t8103-dart
+          - apple,t8103-usb4-dart
+          - apple,t8110-dart
+          - apple,t6000-dart
+      - items:
+          - const: apple,t6020-dart
+          - const: apple,t8110-dart
 
   reg:
     maxItems: 1
@@ -41,6 +49,9 @@ properties:
       Has to be one. The single cell describes the stream id emitted by
       a master to the IOMMU.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iommu/apple,sart.yaml b/Documentation/devicetree/bindings/iommu/apple,sart.yaml
new file mode 100644
index 000000000000..88e66d4b13c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/apple,sart.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/apple,sart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SART DMA address filter
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  Apple SART is a simple address filter for DMA transactions. Regions of
+  physical memory must be added to the SART's allow list before any
+  DMA can target these. Unlike a proper IOMMU no remapping can be done and
+  special support in the consumer driver is required since not all DMA
+  transactions of a single device are subject to SART filtering.
+
+  SART1 has first been used since at least the A11 (iPhone 8 and iPhone X)
+  and allows 36 bit of physical address space and filter entries with sizes
+  up to 24 bit.
+
+  SART2, first seen in A14 and M1, allows 36 bit of physical address space
+  and filter entry size up to 36 bit.
+
+  SART3, first seen in M1 Pro/Max, extends both the address space and filter
+  entry size to 42 bit.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - apple,t6020-sart
+              - apple,t8112-sart
+          - const: apple,t6000-sart
+      - enum:
+          - apple,t6000-sart
+          - apple,t8015-sart
+          - apple,t8103-sart
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu@7bc50000 {
+      compatible = "apple,t8103-sart";
+      reg = <0x7bc50000 0x4000>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
index e87bfbcc6913..75fcf4cb52d9 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
@@ -37,12 +37,13 @@ properties:
           hardware supports just a single, combined interrupt line.
           If provided, then the combined interrupt will be used in preference to
           any others.
-      - minItems: 2
+      - minItems: 1
         items:
-          - const: eventq     # Event Queue not empty
-          - const: gerror     # Global Error activated
-          - const: priq       # PRI Queue not empty
-          - const: cmdq-sync  # CMD_SYNC complete
+          enum:
+            - eventq      # Event Queue not empty
+            - gerror      # Global Error activated
+            - cmdq-sync   # CMD_SYNC complete
+            - priq        # PRI Queue not empty
 
   '#iommu-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index f66a3effba73..cdbd23b5c08c 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -28,26 +28,114 @@ properties:
           - enum:
               - qcom,msm8996-smmu-v2
               - qcom,msm8998-smmu-v2
+              - qcom,sdm630-smmu-v2
+              - qcom,sm6375-smmu-v2
           - const: qcom,smmu-v2
 
-      - description: Qcom SoCs implementing "arm,mmu-500"
+      - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500"
         items:
           - enum:
+              - qcom,glymur-smmu-500
+              - qcom,kaanapali-smmu-500
+              - qcom,milos-smmu-500
               - qcom,qcm2290-smmu-500
+              - qcom,qcs615-smmu-500
+              - qcom,qcs8300-smmu-500
+              - qcom,qdu1000-smmu-500
+              - qcom,sa8255p-smmu-500
+              - qcom,sa8775p-smmu-500
+              - qcom,sar2130p-smmu-500
               - qcom,sc7180-smmu-500
               - qcom,sc7280-smmu-500
               - qcom,sc8180x-smmu-500
+              - qcom,sc8280xp-smmu-500
+              - qcom,sdm670-smmu-500
               - qcom,sdm845-smmu-500
+              - qcom,sdx55-smmu-500
+              - qcom,sdx65-smmu-500
+              - qcom,sdx75-smmu-500
+              - qcom,sm6115-smmu-500
+              - qcom,sm6125-smmu-500
               - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
               - qcom,sm8150-smmu-500
               - qcom,sm8250-smmu-500
               - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+              - qcom,sm8550-smmu-500
+              - qcom,sm8650-smmu-500
+              - qcom,sm8750-smmu-500
+              - qcom,x1e80100-smmu-500
+          - const: qcom,smmu-500
+          - const: arm,mmu-500
+
+      - description: Qcom SoCs implementing "arm,mmu-500" (legacy binding)
+        deprecated: true
+        items:
+          # Do not add additional SoC to this list. Instead use two previous lists.
+          - enum:
+              - qcom,qcm2290-smmu-500
+              - qcom,sc7180-smmu-500
+              - qcom,sc7280-smmu-500
+              - qcom,sc8180x-smmu-500
+              - qcom,sc8280xp-smmu-500
+              - qcom,sdm845-smmu-500
+              - qcom,sm6115-smmu-500
+              - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+              - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+          - const: arm,mmu-500
+      - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500"
+        items:
+          - enum:
+              - qcom,glymur-smmu-500
+              - qcom,kaanapali-smmu-500
+              - qcom,milos-smmu-500
+              - qcom,qcm2290-smmu-500
+              - qcom,qcs615-smmu-500
+              - qcom,qcs8300-smmu-500
+              - qcom,sa8255p-smmu-500
+              - qcom,sa8775p-smmu-500
+              - qcom,sar2130p-smmu-500
+              - qcom,sc7280-smmu-500
+              - qcom,sc8180x-smmu-500
+              - qcom,sc8280xp-smmu-500
+              - qcom,sm6115-smmu-500
+              - qcom,sm6125-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+              - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+              - qcom,sm8550-smmu-500
+              - qcom,sm8650-smmu-500
+              - qcom,sm8750-smmu-500
+              - qcom,x1e80100-smmu-500
+          - const: qcom,adreno-smmu
+          - const: qcom,smmu-500
+          - const: arm,mmu-500
+      - description: Qcom Adreno GPUs implementing "arm,mmu-500" (legacy binding)
+        deprecated: true
+        items:
+          # Do not add additional SoC to this list. Instead use previous list.
+          - enum:
+              - qcom,sc7280-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+          - const: qcom,adreno-smmu
           - const: arm,mmu-500
       - description: Qcom Adreno GPUs implementing "arm,smmu-v2"
         items:
           - enum:
+              - qcom,msm8996-smmu-v2
               - qcom,sc7180-smmu-v2
+              - qcom,sdm630-smmu-v2
+              - qcom,sdm670-smmu-v2
               - qcom,sdm845-smmu-v2
+              - qcom,sm6350-smmu-v2
+              - qcom,sm7150-smmu-v2
           - const: qcom,adreno-smmu
           - const: qcom,smmu-v2
       - description: Marvell SoCs implementing "arm,mmu-500"
@@ -60,8 +148,9 @@ properties:
           for improved performance.
         items:
           - enum:
-              - nvidia,tegra194-smmu
               - nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra234-smmu
           - const: nvidia,smmu-500
       - items:
           - const: arm,mmu-500
@@ -141,19 +230,27 @@ properties:
       present in such cases.
 
   clock-names:
-    items:
-      - const: bus
-      - const: iface
+    minItems: 1
+    maxItems: 7
 
   clocks:
-    items:
-      - description: bus clock required for downstream bus access and for the
-          smmu ptw
-      - description: interface clock required to access smmu's registers
-          through the TCU's programming interface.
+    minItems: 1
+    maxItems: 7
 
   power-domains:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  nvidia,memory-controller:
+    description: |
+      A phandle to the memory controller on NVIDIA Tegra186 and later SoCs.
+      The memory controller needs to be programmed with a mapping of memory
+      client IDs to ARM SMMU stream IDs.
+
+      If this property is absent, the mapping programmed by early firmware
+      will be used and it is not guaranteed that IOMMU translations will be
+      enabled for any given device.
+    $ref: /schemas/types.yaml#/definitions/phandle
 
 required:
   - compatible
@@ -170,18 +267,359 @@ allOf:
         compatible:
           contains:
             enum:
-              - nvidia,tegra194-smmu
               - nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra234-smmu
     then:
       properties:
         reg:
           minItems: 1
           maxItems: 2
+
+      # The reference to the memory controller is required to ensure that the
+      # memory client to stream ID mapping can be done synchronously with the
+      # IOMMU attachment.
+      required:
+        - nvidia,memory-controller
     else:
       properties:
         reg:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-smmu-v2
+              - qcom,sdm630-smmu-v2
+    then:
+      anyOf:
+        - properties:
+            clock-names:
+              items:
+                - const: bus
+            clocks:
+              items:
+                - description: bus clock required for downstream bus access and for
+                    the smmu ptw
+        - properties:
+            clock-names:
+              items:
+                - const: iface
+                - const: mem
+                - const: mem_iface
+            clocks:
+              items:
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for memory access
+                - description: bus clock required for GPU memory access
+        - properties:
+            clock-names:
+              items:
+                - const: iface-mm
+                - const: iface-smmu
+                - const: bus-smmu
+            clocks:
+              items:
+                - description: interface clock required to access mnoc's registers
+                    through the TCU's programming interface.
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for the smmu ptw
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6375-smmu-v2
+    then:
+      anyOf:
+        - properties:
+            clock-names:
+              items:
+                - const: bus
+            clocks:
+              items:
+                - description: bus clock required for downstream bus access and for
+                    the smmu ptw
+        - properties:
+            clock-names:
+              items:
+                - const: iface
+                - const: mem
+                - const: mem_iface
+            clocks:
+              items:
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for memory access
+                - description: bus clock required for GPU memory access
+        - properties:
+            clock-names:
+              items:
+                - const: iface-mm
+                - const: iface-smmu
+                - const: bus-mm
+                - const: bus-smmu
+            clocks:
+              items:
+                - description: interface clock required to access mnoc's registers
+                    through the TCU's programming interface.
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for downstream bus access
+                - description: bus clock required for the smmu ptw
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-smmu-v2
+              - qcom,sc7180-smmu-v2
+              - qcom,sdm845-smmu-v2
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: iface
+
+        clocks:
+          items:
+            - description: bus clock required for downstream bus access and for
+                the smmu ptw
+            - description: interface clock required to access smmu's registers
+                through the TCU's programming interface.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs8300-smmu-500
+              - qcom,sa8775p-smmu-500
+              - qcom,sc7280-smmu-500
+              - qcom,sc8280xp-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: gcc_gpu_memnoc_gfx_clk
+            - const: gcc_gpu_snoc_dvm_gfx_clk
+            - const: gpu_cc_ahb_clk
+            - const: gpu_cc_hlos1_vote_gpu_smmu_clk
+            - const: gpu_cc_cx_gmu_clk
+            - const: gpu_cc_hub_cx_int_clk
+            - const: gpu_cc_hub_aon_clk
+
+        clocks:
+          items:
+            - description: GPU memnoc_gfx clock
+            - description: GPU snoc_dvm_gfx clock
+            - description: GPU ahb clock
+            - description: GPU hlos1_vote_GPU smmu clock
+            - description: GPU cx_gmu clock
+            - description: GPU hub_cx_int clock
+            - description: GPU hub_aon clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-smmu-500
+              - qcom,sm6350-smmu-v2
+              - qcom,sm7150-smmu-v2
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahb
+            - const: bus
+            - const: iface
+
+        clocks:
+          items:
+            - description: bus clock required for AHB bus access
+            - description: bus clock required for downstream bus access and for
+                the smmu ptw
+            - description: interface clock required to access smmu's registers
+                through the TCU's programming interface.
+
+  - if:
+      properties:
+        compatible:
+          items:
+            - enum:
+                - qcom,sm8350-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: iface
+            - const: ahb
+            - const: hlos1_vote_gpu_smmu
+            - const: cx_gmu
+            - const: hub_cx_int
+            - const: hub_aon
+        clocks:
+          minItems: 7
+          maxItems: 7
+
+  - if:
+      properties:
+        compatible:
+          items:
+            - enum:
+                - qcom,qcm2290-smmu-500
+                - qcom,qcs615-smmu-500
+                - qcom,sm6115-smmu-500
+                - qcom,sm6125-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: mem
+            - const: hlos
+            - const: iface
+
+        clocks:
+          items:
+            - description: GPU memory bus clock
+            - description: Voter clock required for HLOS SMMU access
+            - description: Interface clock required for register access
+
+  - if:
+      properties:
+        compatible:
+          items:
+            - const: qcom,sm8450-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: gmu
+            - const: hub
+            - const: hlos
+            - const: bus
+            - const: iface
+            - const: ahb
+
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU HUB clock
+            - description: HLOS vote clock
+            - description: GPU memory bus clock
+            - description: GPU SNoC bus clock
+            - description: GPU AHB clock
+
+  - if:
+      properties:
+        compatible:
+          items:
+            - enum:
+                - qcom,milos-smmu-500
+                - qcom,sar2130p-smmu-500
+                - qcom,sm8550-smmu-500
+                - qcom,sm8650-smmu-500
+                - qcom,x1e80100-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: hlos
+            - const: bus
+            - const: iface
+            - const: ahb
+
+        clocks:
+          items:
+            - description: HLOS vote clock
+            - description: GPU memory bus clock
+            - description: GPU SNoC bus clock
+            - description: GPU AHB clock
+
+  - if:
+      properties:
+        compatible:
+          items:
+            - const: qcom,sm8750-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: hlos
+        clocks:
+          items:
+            - description: HLOS vote clock
+
+  # Disallow clocks for all other platforms with specific compatibles
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cavium,smmu-v2
+              - marvell,ap806-smmu-500
+              - nvidia,smmu-500
+              - qcom,qdu1000-smmu-500
+              - qcom,sa8255p-smmu-500
+              - qcom,sc7180-smmu-500
+              - qcom,sdm670-smmu-500
+              - qcom,sdm845-smmu-500
+              - qcom,sdx55-smmu-500
+              - qcom,sdx65-smmu-500
+              - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
+    then:
+      properties:
+        clock-names: false
+        clocks: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sm6375-smmu-500
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: SNoC MMU TBU RT GDSC
+            - description: SNoC MMU TBU NRT GDSC
+            - description: SNoC TURING MMU TBU0 GDSC
+
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains:
+          maxItems: 1
+
 examples:
   - |+
     /* SMMU with stream matching or stream indexing */
@@ -204,7 +642,6 @@ examples:
                      <&smmu1 7>;
     };
 
-
     /* SMMU with stream matching */
     smmu2: iommu@ba5f0000 {
             compatible = "arm,smmu-v1";
@@ -230,7 +667,6 @@ examples:
             iommus = <&smmu2 1 0x30>;
     };
 
-
     /* ARM MMU-500 with 10-bit stream ID input configuration */
     smmu3: iommu@ba600000 {
             compatible = "arm,mmu-500", "arm,smmu-v2";
@@ -251,8 +687,6 @@ examples:
             /* bus whose child devices emit one unique 10-bit stream
                ID each, but may master through multiple SMMU TBUs */
             iommu-map = <0 &smmu3 0 0x400>;
-
-
     };
 
   - |+
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
index 0f26fe14c8e2..79c573c47b08 100644
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
@@ -52,7 +52,7 @@ description: |+
   As above, The Multimedia HW will go through SMI and M4U while it
   access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain
   smi local arbiter and smi common. It will control whether the Multimedia
-  HW should go though the m4u for translation or bypass it and talk
+  HW should go through the m4u for translation or bypass it and talk
   directly with EMI. And also SMI help control the power domain and clocks for
   each local arbiter.
 
@@ -73,10 +73,23 @@ properties:
           - mediatek,mt2701-m4u  # generation one
           - mediatek,mt2712-m4u  # generation two
           - mediatek,mt6779-m4u  # generation two
+          - mediatek,mt6795-m4u  # generation two
+          - mediatek,mt6893-iommu-mm         # generation two
           - mediatek,mt8167-m4u  # generation two
           - mediatek,mt8173-m4u  # generation two
           - mediatek,mt8183-m4u  # generation two
+          - mediatek,mt8186-iommu-mm         # generation two
+          - mediatek,mt8188-iommu-vdo        # generation two
+          - mediatek,mt8188-iommu-vpp        # generation two
+          - mediatek,mt8188-iommu-infra      # generation two
+          - mediatek,mt8189-iommu-apu        # generation two
+          - mediatek,mt8189-iommu-infra      # generation two
+          - mediatek,mt8189-iommu-mm         # generation two
           - mediatek,mt8192-m4u  # generation two
+          - mediatek,mt8195-iommu-vdo        # generation two
+          - mediatek,mt8195-iommu-vpp        # generation two
+          - mediatek,mt8195-iommu-infra      # generation two
+          - mediatek,mt8365-m4u  # generation two
 
       - description: mt7623 generation one
         items:
@@ -97,10 +110,16 @@ properties:
     items:
       - const: bclk
 
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the mediatek infracfg syscon
+
   mediatek,larbs:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 32
+    items:
+      maxItems: 1
     description: |
       List of phandle to the local arbiters in the current Socs.
       Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort
@@ -111,13 +130,20 @@ properties:
     description: |
       This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as
       defined in
+      dt-binding/memory/mediatek,mt8188-memory-port.h for mt8188,
+      dt-binding/memory/mediatek,mt8189-memory-port.h for mt8189,
       dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623,
       dt-binding/memory/mt2712-larb-port.h for mt2712,
       dt-binding/memory/mt6779-larb-port.h for mt6779,
+      dt-binding/memory/mt6795-larb-port.h for mt6795,
+      dt-binding/memory/mediatek,mt6893-memory-port.h for mt6893,
       dt-binding/memory/mt8167-larb-port.h for mt8167,
       dt-binding/memory/mt8173-larb-port.h for mt8173,
       dt-binding/memory/mt8183-larb-port.h for mt8183,
+      dt-binding/memory/mt8186-memory-port.h for mt8186,
       dt-binding/memory/mt8192-larb-port.h for mt8192.
+      dt-binding/memory/mt8195-memory-port.h for mt8195.
+      dt-binding/memory/mediatek,mt8365-larb-port.h for mt8365.
 
   power-domains:
     maxItems: 1
@@ -126,7 +152,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - mediatek,larbs
   - '#iommu-cells'
 
 allOf:
@@ -137,8 +162,16 @@ allOf:
             enum:
               - mediatek,mt2701-m4u
               - mediatek,mt2712-m4u
+              - mediatek,mt6795-m4u
+              - mediatek,mt6893-iommu-mm
               - mediatek,mt8173-m4u
+              - mediatek,mt8186-iommu-mm
+              - mediatek,mt8188-iommu-vdo
+              - mediatek,mt8188-iommu-vpp
+              - mediatek,mt8189-iommu-mm
               - mediatek,mt8192-m4u
+              - mediatek,mt8195-iommu-vdo
+              - mediatek,mt8195-iommu-vpp
 
     then:
       required:
@@ -148,12 +181,47 @@ allOf:
       properties:
         compatible:
           enum:
+            - mediatek,mt6893-iommu-mm
+            - mediatek,mt8186-iommu-mm
+            - mediatek,mt8188-iommu-vdo
+            - mediatek,mt8188-iommu-vpp
+            - mediatek,mt8189-iommu-mm
             - mediatek,mt8192-m4u
+            - mediatek,mt8195-iommu-vdo
+            - mediatek,mt8195-iommu-vpp
 
     then:
       required:
         - power-domains
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2712-m4u
+              - mediatek,mt6795-m4u
+              - mediatek,mt8173-m4u
+
+    then:
+      required:
+        - mediatek,infracfg
+
+  - if: # The IOMMUs don't have larbs.
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - mediatek,mt8188-iommu-infra
+                - mediatek,mt8189-iommu-apu
+                - mediatek,mt8189-iommu-infra
+                - mediatek,mt8195-iommu-infra
+
+    then:
+      required:
+        - mediatek,larbs
+
 additionalProperties: false
 
 examples:
@@ -167,17 +235,8 @@ examples:
             interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
             clocks = <&infracfg CLK_INFRA_M4U>;
             clock-names = "bclk";
-            mediatek,larbs = <&larb0 &larb1 &larb2
-                              &larb3 &larb4 &larb5>;
+            mediatek,infracfg = <&infracfg>;
+            mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+                             <&larb3>, <&larb4>, <&larb5>;
             #iommu-cells = <1>;
     };
-
-  - |
-    #include <dt-bindings/memory/mt8173-larb-port.h>
-
-    /* Example for a client device */
-    display {
-           compatible = "mediatek,mt8173-disp";
-           iommus = <&iommu M4U_PORT_DISP_OVL0>,
-                    <&iommu M4U_PORT_DISP_RDMA0>;
-     };
diff --git a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt b/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
deleted file mode 100644
index 20236385f26e..000000000000
--- a/Documentation/devicetree/bindings/iommu/msm,iommu-v0.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* QCOM IOMMU
-
-The MSM IOMMU is an implementation compatible with the ARM VMSA short
-descriptor page tables. It provides address translation for bus masters outside
-of the CPU, each connected to the IOMMU through a port called micro-TLB.
-
-Required Properties:
-
-  - compatible: Must contain "qcom,apq8064-iommu".
-  - reg: Base address and size of the IOMMU registers.
-  - interrupts: Specifiers for the MMU fault interrupts. For instances that
-    support secure mode two interrupts must be specified, for non-secure and
-    secure mode, in that order. For instances that don't support secure mode a
-    single interrupt must be specified.
-  - #iommu-cells: The number of cells needed to specify the stream id. This
-		  is always 1.
-  - qcom,ncb:	  The total number of context banks in the IOMMU.
-  - clocks	: List of clocks to be used during SMMU register access. See
-		  Documentation/devicetree/bindings/clock/clock-bindings.txt
-		  for information about the format. For each clock specified
-		  here, there must be a corresponding entry in clock-names
-		  (see below).
-
-  - clock-names	: List of clock names corresponding to the clocks specified in
-		  the "clocks" property (above).
-		  Should be "smmu_pclk" for specifying the interface clock
-		  required for iommu's register accesses.
-		  Should be "smmu_clk" for specifying the functional clock
-		  required by iommu for bus accesses.
-
-Each bus master connected to an IOMMU must reference the IOMMU in its device
-node with the following property:
-
-  - iommus: A reference to the IOMMU in multiple cells. The first cell is a
-	    phandle to the IOMMU and the second cell is the stream id.
-	    A single master device can be connected to more than one iommu
-	    and multiple contexts in each of the iommu. So multiple entries
-	    are required to list all the iommus and the stream ids that the
-	    master is connected to.
-
-Example: mdp iommu and its bus master
-
-                mdp_port0: iommu@7500000 {
-			compatible = "qcom,apq8064-iommu";
-			#iommu-cells = <1>;
-			clock-names =
-			    "smmu_pclk",
-			    "smmu_clk";
-			clocks =
-			    <&mmcc SMMU_AHB_CLK>,
-			    <&mmcc MDP_AXI_CLK>;
-			reg = <0x07500000 0x100000>;
-			interrupts =
-			    <GIC_SPI 63 0>,
-			    <GIC_SPI 64 0>;
-			qcom,ncb = <2>;
-		};
-
-		mdp: qcom,mdp@5100000 {
-			compatible = "qcom,mdp";
-			...
-			iommus = <&mdp_port0 0
-				  &mdp_port0 2>;
-		};
diff --git a/Documentation/devicetree/bindings/iommu/qcom,apq8064-iommu.yaml b/Documentation/devicetree/bindings/iommu/qcom,apq8064-iommu.yaml
new file mode 100644
index 000000000000..9f83f851e61a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,apq8064-iommu.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/iommu/qcom,apq8064-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm APQ8064 IOMMU
+
+maintainers:
+  - David Heidelberg <david@ixit.cz>
+
+description:
+  The MSM IOMMU is an implementation compatible with the ARM VMSA short
+  descriptor page tables. It provides address translation for bus masters
+  outside of the CPU, each connected to the IOMMU through a port called micro-TLB.
+
+properties:
+  compatible:
+    const: qcom,apq8064-iommu
+
+  clocks:
+    items:
+      - description: interface clock for register accesses
+      - description: functional clock for bus accesses
+
+  clock-names:
+    items:
+      - const: smmu_pclk
+      - const: iommu_clk
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Specifiers for the MMU fault interrupts.
+    minItems: 1
+    items:
+      - description: non-secure mode interrupt
+      - description: secure mode interrupt (for instances which supports it)
+
+  "#iommu-cells":
+    const: 1
+    description: Each IOMMU specifier describes a single Stream ID.
+
+  qcom,ncb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The total number of context banks in the IOMMU.
+    minimum: 1
+    maximum: 4
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - qcom,ncb
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    iommu@7500000 {
+            compatible = "qcom,apq8064-iommu";
+            reg = <0x07500000 0x100000>;
+            interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk SMMU_AHB_CLK>,
+                     <&clk MDP_AXI_CLK>;
+            clock-names = "smmu_pclk",
+                          "iommu_clk";
+            #iommu-cells = <1>;
+            qcom,ncb = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
deleted file mode 100644
index 059139abce35..000000000000
--- a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-* QCOM IOMMU v1 Implementation
-
-Qualcomm "B" family devices which are not compatible with arm-smmu have
-a similar looking IOMMU but without access to the global register space,
-and optionally requiring additional configuration to route context irqs
-to non-secure vs secure interrupt line.
-
-** Required properties:
-
-- compatible       : Should be one of:
-
-                        "qcom,msm8916-iommu"
-
-                     Followed by "qcom,msm-iommu-v1".
-
-- clock-names      : Should be a pair of "iface" (required for IOMMUs
-                     register group access) and "bus" (required for
-                     the IOMMUs underlying bus access).
-
-- clocks           : Phandles for respective clocks described by
-                     clock-names.
-
-- #address-cells   : must be 1.
-
-- #size-cells      : must be 1.
-
-- #iommu-cells     : Must be 1.  Index identifies the context-bank #.
-
-- ranges           : Base address and size of the iommu context banks.
-
-- qcom,iommu-secure-id  : secure-id.
-
-- List of sub-nodes, one per translation context bank.  Each sub-node
-  has the following required properties:
-
-  - compatible     : Should be one of:
-        - "qcom,msm-iommu-v1-ns"  : non-secure context bank
-        - "qcom,msm-iommu-v1-sec" : secure context bank
-  - reg            : Base address and size of context bank within the iommu
-  - interrupts     : The context fault irq.
-
-** Optional properties:
-
-- reg              : Base address and size of the SMMU local base, should
-                     be only specified if the iommu requires configuration
-                     for routing of context bank irq's to secure vs non-
-                     secure lines.  (Ie. if the iommu contains secure
-                     context banks)
-
-
-** Examples:
-
-	apps_iommu: iommu@1e20000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#iommu-cells = <1>;
-		compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
-		ranges = <0 0x1e20000 0x40000>;
-		reg = <0x1ef0000 0x3000>;
-		clocks = <&gcc GCC_SMMU_CFG_CLK>,
-			 <&gcc GCC_APSS_TCU_CLK>;
-		clock-names = "iface", "bus";
-		qcom,iommu-secure-id = <17>;
-
-		// mdp_0:
-		iommu-ctx@4000 {
-			compatible = "qcom,msm-iommu-v1-ns";
-			reg = <0x4000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		// venus_ns:
-		iommu-ctx@5000 {
-			compatible = "qcom,msm-iommu-v1-sec";
-			reg = <0x5000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	gpu_iommu: iommu@1f08000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#iommu-cells = <1>;
-		compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
-		ranges = <0 0x1f08000 0x10000>;
-		clocks = <&gcc GCC_SMMU_CFG_CLK>,
-			 <&gcc GCC_GFX_TCU_CLK>;
-		clock-names = "iface", "bus";
-		qcom,iommu-secure-id = <18>;
-
-		// gfx3d_user:
-		iommu-ctx@1000 {
-			compatible = "qcom,msm-iommu-v1-ns";
-			reg = <0x1000 0x1000>;
-			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		// gfx3d_priv:
-		iommu-ctx@2000 {
-			compatible = "qcom,msm-iommu-v1-ns";
-			reg = <0x2000 0x1000>;
-			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	...
-
-	venus: video-codec@1d00000 {
-		...
-		iommus = <&apps_iommu 5>;
-	};
-
-	mdp: mdp@1a01000 {
-		...
-		iommus = <&apps_iommu 4>;
-	};
-
-	gpu@1c00000 {
-		...
-		iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
-	};
diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml
new file mode 100644
index 000000000000..93a489025317
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/qcom,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies legacy IOMMU implementations
+
+maintainers:
+  - Konrad Dybcio <konradybcio@kernel.org>
+
+description: |
+  Qualcomm "B" family devices which are not compatible with arm-smmu have
+  a similar looking IOMMU, but without access to the global register space
+  and optionally requiring additional configuration to route context IRQs
+  to non-secure vs secure interrupt line.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,msm8916-iommu
+              - qcom,msm8917-iommu
+              - qcom,msm8937-iommu
+              - qcom,msm8953-iommu
+          - const: qcom,msm-iommu-v1
+      - items:
+          - enum:
+              - qcom,msm8953-iommu
+              - qcom,msm8976-iommu
+          - const: qcom,msm-iommu-v2
+
+  clocks:
+    minItems: 2
+    items:
+      - description: Clock required for IOMMU register group access
+      - description: Clock required for underlying bus access
+      - description: Clock required for Translation Buffer Unit access
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: iface
+      - const: bus
+      - const: tbu
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  qcom,iommu-secure-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The SCM secure ID of the IOMMU instance.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#iommu-cells':
+    const: 1
+
+patternProperties:
+  "^iommu-ctx@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        enum:
+          - qcom,msm-iommu-v1-ns
+          - qcom,msm-iommu-v1-sec
+          - qcom,msm-iommu-v2-ns
+          - qcom,msm-iommu-v2-sec
+
+      interrupts:
+        maxItems: 1
+
+      reg:
+        maxItems: 1
+
+      qcom,ctx-asid:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          The ASID number associated to the context bank.
+
+    required:
+      - compatible
+      - interrupts
+      - reg
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    apps_iommu: iommu@1e20000 {
+      compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+      reg = <0x01ef0000 0x3000>;
+      clocks = <&gcc GCC_SMMU_CFG_CLK>,
+               <&gcc GCC_APSS_TCU_CLK>;
+      clock-names = "iface", "bus";
+      qcom,iommu-secure-id = <17>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      #iommu-cells = <1>;
+      ranges = <0 0x01e20000 0x40000>;
+
+      /* mdp_0: */
+      iommu-ctx@4000 {
+        compatible = "qcom,msm-iommu-v1-ns";
+        reg = <0x4000 0x1000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iommu/qcom,tbu.yaml b/Documentation/devicetree/bindings/iommu/qcom,tbu.yaml
new file mode 100644
index 000000000000..82dfe935573e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,tbu.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/qcom,tbu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm TBU (Translation Buffer Unit)
+
+maintainers:
+  - Georgi Djakov <quic_c_gdjako@quicinc.com>
+
+description:
+  The Qualcomm SMMU500 implementation consists of TCU and TBU. The TBU contains
+  a Translation Lookaside Buffer (TLB) that caches page tables. TBUs provides
+  debug features to trace and trigger debug transactions. There are multiple TBU
+  instances with each client core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-tbu
+      - qcom,sdm845-tbu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  qcom,stream-id-range:
+    description: |
+      Phandle of a SMMU device and Stream ID range (address and size) that
+      is assigned by the TBU
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle of a smmu node
+          - description: stream id base address
+          - description: stream id size
+
+required:
+  - compatible
+  - reg
+  - qcom,stream-id-range
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+    tbu@150e1000 {
+        compatible = "qcom,sdm845-tbu";
+        reg = <0x150e1000 0x1000>;
+        clocks = <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+        interconnects = <&system_noc MASTER_GNOC_SNOC QCOM_ICC_TAG_ACTIVE_ONLY
+                         &config_noc SLAVE_IMEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+        power-domains = <&gcc HLOS1_VOTE_AGGRE_NOC_MMU_PCIE_TBU_GDSC>;
+        qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
index ce0c715205c6..0acaa2bcec08 100644
--- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
+++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
@@ -29,6 +29,7 @@ properties:
               - renesas,ipmmu-r8a7793  # R-Car M2-N
               - renesas,ipmmu-r8a7794  # R-Car E2
           - const: renesas,ipmmu-vmsa  # R-Mobile APE6 or R-Car Gen2 or RZ/G1
+
       - items:
           - enum:
               - renesas,ipmmu-r8a774a1 # RZ/G2M
@@ -43,7 +44,14 @@ properties:
               - renesas,ipmmu-r8a77980 # R-Car V3H
               - renesas,ipmmu-r8a77990 # R-Car E3
               - renesas,ipmmu-r8a77995 # R-Car D3
-              - renesas,ipmmu-r8a779a0 # R-Car V3U
+
+      - items:
+          - enum:
+              - renesas,ipmmu-r8a779a0           # R-Car V3U
+              - renesas,ipmmu-r8a779f0           # R-Car S4-8
+              - renesas,ipmmu-r8a779g0           # R-Car V4H
+              - renesas,ipmmu-r8a779h0           # R-Car V4M
+          - const: renesas,rcar-gen4-ipmmu-vmsa  # R-Car Gen4
 
   reg:
     maxItems: 1
@@ -66,11 +74,17 @@ properties:
 
   renesas,ipmmu-main:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - minItems: 1
+        items:
+          - description: phandle to main IPMMU
+          - description:
+              The interrupt bit number associated with the particular cache
+              IPMMU device. If present, the interrupt bit number needs to match
+              the main IPMMU IMSSTR register. Only used by cache IPMMU
+              instances.
     description:
-      Reference to the main IPMMU phandle plus 1 cell. The cell is
-      the interrupt bit number associated with the particular cache IPMMU
-      device. The interrupt bit number needs to match the main IPMMU IMSSTR
-      register. Only used by cache IPMMU instances.
+      Reference to the main IPMMU.
 
 required:
   - compatible
@@ -96,6 +110,22 @@ allOf:
       required:
         - power-domains
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar-gen4-ipmmu-vmsa
+    then:
+      properties:
+        renesas,ipmmu-main:
+          items:
+            - maxItems: 1
+    else:
+      properties:
+        renesas,ipmmu-main:
+          items:
+            - minItems: 2
+
 examples:
   - |
     #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
diff --git a/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml b/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml
new file mode 100644
index 000000000000..d4838c3b3741
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/riscv,iommu.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/riscv,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V IOMMU Architecture Implementation
+
+maintainers:
+  - Tomasz Jeznach <tjeznach@rivosinc.com>
+
+description: |
+  The RISC-V IOMMU provides memory address translation and isolation for
+  input and output devices, supporting per-device translation context,
+  shared process address spaces including the ATS and PRI components of
+  the PCIe specification, two stage address translation and MSI remapping.
+  It supports identical translation table format to the RISC-V address
+  translation tables with page level access and protection attributes.
+  Hardware uses in-memory command and fault reporting queues with wired
+  interrupt or MSI notifications.
+
+  Visit https://github.com/riscv-non-isa/riscv-iommu for more details.
+
+  For information on assigning RISC-V IOMMU to its peripheral devices,
+  see generic IOMMU bindings.
+
+properties:
+  # For PCIe IOMMU hardware compatible property should contain the vendor
+  # and device ID according to the PCI Bus Binding specification.
+  # Since PCI provides built-in identification methods, compatible is not
+  # actually required. For non-PCIe hardware implementations 'riscv,iommu'
+  # should be specified along with 'reg' property providing MMIO location.
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qemu,riscv-iommu
+          - const: riscv,iommu
+      - items:
+          - enum:
+              - pci1efd,edf1
+          - const: riscv,pci-iommu
+
+  reg:
+    maxItems: 1
+    description:
+      For non-PCI devices this represents base address and size of for the
+      IOMMU memory mapped registers interface.
+      For PCI IOMMU hardware implementation this should represent an address
+      of the IOMMU, as defined in the PCI Bus Binding reference.
+
+  '#iommu-cells':
+    const: 1
+    description:
+      The single cell describes the requester id emitted by a master to the
+      IOMMU.
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description:
+      Wired interrupt vectors available for RISC-V IOMMU to notify the
+      RISC-V HARTS. The cause to interrupt vector is software defined
+      using IVEC IOMMU register.
+
+  msi-parent: true
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+  - |+
+    /* Example 1 (IOMMU device with wired interrupts) */
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    iommu1: iommu@1bccd000 {
+        compatible = "qemu,riscv-iommu", "riscv,iommu";
+        reg = <0x1bccd000 0x1000>;
+        interrupt-parent = <&aplic_smode>;
+        interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+                     <33 IRQ_TYPE_LEVEL_HIGH>,
+                     <34 IRQ_TYPE_LEVEL_HIGH>,
+                     <35 IRQ_TYPE_LEVEL_HIGH>;
+        #iommu-cells = <1>;
+    };
+
+    /* Device with two IOMMU device IDs, 0 and 7 */
+    master1 {
+        iommus = <&iommu1 0>, <&iommu1 7>;
+    };
+
+  - |+
+    /* Example 2 (IOMMU device with shared wired interrupt) */
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    iommu2: iommu@1bccd000 {
+        compatible = "qemu,riscv-iommu", "riscv,iommu";
+        reg = <0x1bccd000 0x1000>;
+        interrupt-parent = <&aplic_smode>;
+        interrupts = <32 IRQ_TYPE_LEVEL_HIGH>;
+        #iommu-cells = <1>;
+    };
+
+  - |+
+    /* Example 3 (IOMMU device with MSIs) */
+    iommu3: iommu@1bcdd000 {
+        compatible = "qemu,riscv-iommu", "riscv,iommu";
+        reg = <0x1bccd000 0x1000>;
+        msi-parent = <&imsics_smode>;
+        #iommu-cells = <1>;
+    };
+
+  - |+
+    /* Example 4 (IOMMU PCIe device with MSIs) */
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@30000000 {
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x0 0x30000000  0x0 0x1000000>;
+            ranges = <0x02000000 0x0 0x41000000  0x0 0x41000000  0x0 0x0f000000>;
+
+            /*
+             * The IOMMU manages all functions in this PCI domain except
+             * itself. Omit BDF 00:01.0.
+             */
+            iommu-map = <0x0 &iommu0 0x0 0x8>,
+                        <0x9 &iommu0 0x9 0xfff7>;
+
+            /* The IOMMU programming interface uses slot 00:01.0 */
+            iommu0: iommu@1,0 {
+                compatible = "pci1efd,edf1", "riscv,pci-iommu";
+                reg = <0x800 0 0 0 0>;
+                #iommu-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
index ba9124f721f1..6ce41d11ff5e 100644
--- a/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/rockchip,iommu.yaml
@@ -19,9 +19,15 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - rockchip,iommu
-      - rockchip,rk3568-iommu
+    oneOf:
+      - enum:
+          - rockchip,iommu
+          - rockchip,rk3568-iommu
+      - items:
+          - enum:
+              - rockchip,rk3576-iommu
+              - rockchip,rk3588-iommu
+          - const: rockchip,rk3568-iommu
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
index af51b91c893e..672a0beea600 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -86,16 +86,6 @@ examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>
 
-    gsc_0: scaler@13e00000 {
-      compatible = "samsung,exynos5-gsc";
-      reg = <0x13e00000 0x1000>;
-      interrupts = <0 85 0>;
-      power-domains = <&pd_gsc>;
-      clocks = <&clock CLK_GSCL0>;
-      clock-names = "gscl";
-      iommus = <&sysmmu_gsc0>;
-    };
-
     sysmmu_gsc0: iommu@13e80000 {
       compatible = "samsung,exynos-sysmmu";
       reg = <0x13E80000 0x1000>;
@@ -107,4 +97,3 @@ examples:
       power-domains = <&pd_gsc>;
       #iommu-cells = <0>;
     };
-
diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
new file mode 100644
index 000000000000..3528b81daa25
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xen specific IOMMU for virtualized devices (e.g. virtio)
+
+maintainers:
+  - Stefano Stabellini <sstabellini@kernel.org>
+
+description:
+  The Xen IOMMU represents the Xen grant table interface. Grant mappings
+  are to be used with devices connected to the Xen IOMMU using the "iommus"
+  property, which also specifies the ID of the backend domain.
+  The binding is required to restrict memory access using Xen grant mappings.
+
+properties:
+  compatible:
+    const: xen,grant-dma
+
+  '#iommu-cells':
+    const: 1
+    description:
+      The single cell is the domid (domain ID) of the domain where the backend
+      is running.
+
+required:
+  - compatible
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu {
+        compatible = "xen,grant-dma";
+        #iommu-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
deleted file mode 100644
index c9902fd4b38b..000000000000
--- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Aspeed BT (Block Transfer) IPMI interface
-
-The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
-(BaseBoard Management Controllers) and the BT interface can be used to
-perform in-band IPMI communication with their host.
-
-Required properties:
-
-- compatible : should be one of
-	"aspeed,ast2400-ibt-bmc"
-	"aspeed,ast2500-ibt-bmc"
-	"aspeed,ast2600-ibt-bmc"
-- reg: physical address and size of the registers
-
-Optional properties:
-
-- interrupts: interrupt generated by the BT interface. without an
-  interrupt, the driver will operate in poll mode.
-
-Example:
-
-	ibt@1e789140 {
-		compatible = "aspeed,ast2400-ibt-bmc";
-		reg = <0x1e789140 0x18>;
-		interrupts = <8>;
-	};
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.yaml
new file mode 100644
index 000000000000..c4f7cdbbe16b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-ibt-bmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed Block Transfer (BT) IPMI interface
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-ibt-bmc
+      - aspeed,ast2500-ibt-bmc
+      - aspeed,ast2600-ibt-bmc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+
+    bt@1e789140 {
+        compatible = "aspeed,ast2400-ibt-bmc";
+        reg = <0x1e789140 0x18>;
+        interrupts = <8>;
+        clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
index 4ff6fabfcb30..610c79863208 100644
--- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
@@ -40,8 +40,11 @@ properties:
       - description: ODR register
       - description: STR register
 
+  clocks:
+    maxItems: 1
+
   aspeed,lpc-io-reg:
-    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 2
     description: |
@@ -50,7 +53,7 @@ properties:
       status address may be optionally provided.
 
   aspeed,lpc-interrupts:
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 2
     maxItems: 2
     description: |
@@ -63,12 +66,12 @@ properties:
 
   kcs_chan:
     deprecated: true
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: The LPC channel number in the controller
 
   kcs_addr:
     deprecated: true
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: The host CPU IO map address
 
 required:
diff --git a/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml b/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml
new file mode 100644
index 000000000000..8b0d71901195
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ipmb-dev.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ipmb-dev.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The Intelligent Platform Management Bus(IPMB) Device
+
+description: |
+  The IPMB is an I2C bus which provides interconnection between a Baseboard
+  Management Controller(BMC) and chassis electronics. The BMC sends IPMI
+  requests to intelligent controllers like Satellite Management Controller(MC)
+  devices via IPMB and the device sends responses back to the BMC.
+  This device uses an I2C slave device to send and receive IPMB messages,
+  either on a BMC or other MC. A miscellaneous device provices a user space
+  program to communicate with the kernel and the backend device. Some IPMB
+  devices only support the I2C protocol and not the SMB protocol.
+
+  IPMB communications protocol Specification V1.0
+  https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmp-spec-v1.0.pdf
+
+maintainers:
+  - Ninad Palsule <ninad@linux.ibm.com>
+
+properties:
+  compatible:
+    enum:
+      - ipmb-dev
+
+  reg:
+    maxItems: 1
+
+  i2c-protocol:
+    description:
+      Use I2C block transfer instead of SMBUS block transfer.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/i2c/i2c.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ipmb-dev@10 {
+            compatible = "ipmb-dev";
+            reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+            i2c-protocol;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
index 93d8f8e88cf5..52647bff31af 100644
--- a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ipmi/ipmi-ipmb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: IPMI IPMB device bindings
+title: IPMI IPMB device
 
 description: IPMI IPMB device bindings
 
@@ -18,7 +18,7 @@ properties:
 
   device_type:
     items:
-      - const: "ipmi"
+      - const: ipmi
 
   reg:
     maxItems: 1
@@ -36,6 +36,14 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Number of retries before a failure is declared.  Defaults to 1.
 
+  slave-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The slave i2c device.  If not present, the main device is used. This
+      lets you use two devices on the IPMB, one for master and one for slave,
+      in case you have a slave device that can only be a slave.  The slave
+      will receive messages and the master will transmit.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
index 898e3267893a..4bffa3d86128 100644
--- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ipmi/ipmi-smic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: IPMI device bindings
+title: IPMI device
 
 description: IPMI device bindings
 
@@ -20,7 +20,7 @@ properties:
 
   device_type:
     items:
-      - const: "ipmi"
+      - const: ipmi
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
deleted file mode 100644
index 352f5e9c759b..000000000000
--- a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-* Nuvoton NPCM7xx KCS (Keyboard Controller Style) IPMI interface
-
-The Nuvoton SOCs (NPCM7xx) are commonly used as BMCs
-(Baseboard Management Controllers) and the KCS interface can be
-used to perform in-band IPMI communication with their host.
-
-Required properties:
-- compatible : should be one of
-    "nuvoton,npcm750-kcs-bmc"
-- interrupts : interrupt generated by the controller
-- kcs_chan : The KCS channel number in the controller
-
-Example:
-
-    lpc_kcs: lpc_kcs@f0007000 {
-        compatible = "nuvoton,npcm750-lpc-kcs", "simple-mfd", "syscon";
-        reg = <0xf0007000 0x40>;
-        reg-io-width = <1>;
-
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0x0 0xf0007000 0x40>;
-
-        kcs1: kcs1@0 {
-            compatible = "nuvoton,npcm750-kcs-bmc";
-            reg = <0x0 0x40>;
-            interrupts = <0 9 4>;
-            kcs_chan = <1>;
-            status = "disabled";
-        };
-
-        kcs2: kcs2@0 {
-            compatible = "nuvoton,npcm750-kcs-bmc";
-            reg = <0x0 0x40>;
-            interrupts = <0 9 4>;
-            kcs_chan = <2>;
-            status = "disabled";
-        };
-    };
diff --git a/Documentation/devicetree/bindings/ipmi/nuvoton,npcm750-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/nuvoton,npcm750-kcs-bmc.yaml
new file mode 100644
index 000000000000..fc5df1c5e3bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/nuvoton,npcm750-kcs-bmc.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/nuvoton,npcm750-kcs-bmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM KCS BMC
+
+maintainers:
+  - Avi Fishman <avifishman70@gmail.com>
+  - Tomer Maimon <tmaimon77@gmail.com>
+  - Tali Perry <tali.perry1@gmail.com>
+
+description:
+  The Nuvoton SOCs (NPCM) are commonly used as BMCs (Baseboard Management
+  Controllers) and the KCS interface can be used to perform in-band IPMI
+  communication with their host.
+
+properties:
+  compatible:
+    oneOf:
+      - const: nuvoton,npcm750-kcs-bmc
+      - items:
+          - enum:
+              - nuvoton,npcm845-kcs-bmc
+          - const: nuvoton,npcm750-kcs-bmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  kcs_chan:
+    description: The KCS channel number in the controller
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 3
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - kcs_chan
+
+additionalProperties: false
+
+examples:
+  - |
+    kcs@0 {
+        compatible = "nuvoton,npcm750-kcs-bmc";
+        reg = <0x0 0x40>;
+        interrupts = <9 4>;
+        kcs_chan = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml b/Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml
new file mode 100644
index 000000000000..02b662d780bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ssif-bmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SSIF IPMI BMC interface
+
+description: SSIF IPMI BMC device bindings
+
+maintainers:
+  - Quan Nguyen <quan@os.amperecomputing.com>
+
+properties:
+  compatible:
+    enum:
+      - ssif-bmc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ssif-bmc@10 {
+            compatible = "ssif-bmc";
+            reg = <0x10>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml b/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
new file mode 100644
index 000000000000..760cb336dccb
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A100 LED Controller
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  The LED controller found in Allwinner sunxi SoCs uses a one-wire serial
+  interface to drive up to 1024 RGB LEDs.
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun50i-a100-ledc
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-ledc
+              - allwinner,sun50i-r329-ledc
+          - const: allwinner,sun50i-a100-ledc
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus clock
+      - description: Module clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    maxItems: 1
+    description: TX DMA channel
+
+  dma-names:
+    const: tx
+
+  allwinner,pixel-format:
+    description: Pixel format (subpixel transmission order), default is "grb"
+    enum:
+      - bgr
+      - brg
+      - gbr
+      - grb
+      - rbg
+      - rgb
+
+  allwinner,t0h-ns:
+    default: 336
+    description: Length of high pulse when transmitting a "0" bit
+
+  allwinner,t0l-ns:
+    default: 840
+    description: Length of low pulse when transmitting a "0" bit
+
+  allwinner,t1h-ns:
+    default: 882
+    description: Length of high pulse when transmitting a "1" bit
+
+  allwinner,t1l-ns:
+    default: 294
+    description: Length of low pulse when transmitting a "1" bit
+
+  allwinner,treset-ns:
+    default: 300000
+    description: Minimum delay between transmission frames
+
+patternProperties:
+  "^multi-led@[0-9a-f]+$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1023
+        description: Index of the LED in the series (must be contiguous)
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    ledc: led-controller@2008000 {
+      compatible = "allwinner,sun20i-d1-ledc",
+                   "allwinner,sun50i-a100-ledc";
+      reg = <0x2008000 0x400>;
+      interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&ccu 12>, <&ccu 34>;
+      clock-names = "bus", "mod";
+      resets = <&ccu 12>;
+      dmas = <&dma 42>;
+      dma-names = "tx";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      multi-led@0 {
+        reg = <0x0>;
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_INDICATOR;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt
deleted file mode 100644
index 4af2987b25e9..000000000000
--- a/Documentation/devicetree/bindings/leds/ams,as3645a.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Analog devices AS3645A device tree bindings
-
-The AS3645A flash LED controller can drive two LEDs, one high current
-flash LED and one indicator LED. The high current flash LED can be
-used in torch mode as well.
-
-Ranges below noted as [a, b] are closed ranges between a and b, i.e. a
-and b are included in the range.
-
-Please also see common.txt in the same directory.
-
-
-Required properties
-===================
-
-compatible	: Must be "ams,as3645a".
-reg		: The I2C address of the device. Typically 0x30.
-#address-cells	: 1
-#size-cells	: 0
-
-
-Required properties of the flash child node (0)
-===============================================
-
-reg: 0
-flash-timeout-us: Flash timeout in microseconds. The value must be in
-		  the range [100000, 850000] and divisible by 50000.
-flash-max-microamp: Maximum flash current in microamperes. Has to be
-		    in the range between [200000, 500000] and
-		    divisible by 20000.
-led-max-microamp: Maximum torch (assist) current in microamperes. The
-		  value must be in the range between [20000, 160000] and
-		  divisible by 20000.
-ams,input-max-microamp: Maximum flash controller input current. The
-			value must be in the range [1250000, 2000000]
-			and divisible by 50000.
-
-
-Optional properties of the flash child node
-===========================================
-
-function	:  See Documentation/devicetree/bindings/leds/common.txt.
-color		:  See Documentation/devicetree/bindings/leds/common.txt.
-label		:  See Documentation/devicetree/bindings/leds/common.txt (deprecated).
-
-
-Required properties of the indicator child node (1)
-===================================================
-
-reg: 1
-led-max-microamp: Maximum indicator current. The allowed values are
-		  2500, 5000, 7500 and 10000.
-
-Optional properties of the indicator child node
-===============================================
-
-function	:  See Documentation/devicetree/bindings/leds/common.txt.
-color		:  See Documentation/devicetree/bindings/leds/common.txt.
-label		:  See Documentation/devicetree/bindings/leds/common.txt (deprecated).
-
-
-Example
-=======
-
-#include <dt-bindings/leds/common.h>
-
-	as3645a@30 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x30>;
-		compatible = "ams,as3645a";
-		led@0 {
-			reg = <0x0>;
-			flash-timeout-us = <150000>;
-			flash-max-microamp = <320000>;
-			led-max-microamp = <60000>;
-			ams,input-max-microamp = <1750000>;
-			function = LED_FUNCTION_FLASH;
-		};
-		led@1 {
-			reg = <0x1>;
-			led-max-microamp = <10000>;
-			function = LED_FUNCTION_INDICATOR;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.yaml b/Documentation/devicetree/bindings/leds/ams,as3645a.yaml
new file mode 100644
index 000000000000..250a4b275d8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ams,as3645a.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ams,as3645a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AS3645A LED Controller
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@iki.fi>
+
+description:
+  The AS3645A flash LED controller can drive two LEDs, one
+  high current flash LED and one indicator LED. The high
+  current flash LED can be used in torch mode as well.
+
+properties:
+  compatible:
+    const: ams,as3645a
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  led@0:
+    description: led0 describes the 'flash' feature
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0
+
+      flash-timeout-us:
+        minimum: 100000
+        maximum: 850000
+        multipleOf: 50000
+
+      flash-max-microamp:
+        minimum: 200000
+        maximum: 500000
+        multipleOf: 20000
+
+      led-max-microamp:
+        minimum: 20000
+        maximum: 160000
+        multipleOf: 20000
+        description:
+          Maximum current when in torch (assist) mode.
+
+      ams,input-max-microamp:
+        minimum: 1250000
+        maximum: 2000000
+        multipleOf: 50000
+
+    required:
+      - reg
+      - flash-timeout-us
+      - flash-max-microamp
+      - led-max-microamp
+      - ams,input-max-microamp
+
+  led@1:
+    description: led1 describes the 'indicator' feature
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 1
+
+      led-max-microamp:
+        enum:
+          - 2500
+          - 5000
+          - 7500
+          - 10000
+        description:
+          Maximum indicator current.
+
+    required:
+      - reg
+      - led-max-microamp
+
+required:
+  - compatible
+  - reg
+  - "#size-cells"
+  - "#address-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c{
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@30 {
+            compatible = "ams,as3645a";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0x30>;
+
+            led@0 {
+                reg = <0>;
+                flash-timeout-us = <150000>;
+                flash-max-microamp = <320000>;
+                led-max-microamp = <60000>;
+                ams,input-max-microamp = <1750000>;
+                function = LED_FUNCTION_FLASH;
+            };
+
+            led@1 {
+                reg = <1>;
+                led-max-microamp = <10000>;
+                function = LED_FUNCTION_INDICATOR;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
new file mode 100644
index 000000000000..17e971903ee9
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AWINIC AW200XX LED
+
+maintainers:
+  - Martin Kurbanov <mmkurbanov@sberdevices.ru>
+
+description: |
+  It is a matrix LED driver programmed via an I2C interface. Devices have
+  a set of individually controlled leds and support 3 pattern controllers
+  for auto breathing or group dimming control. Supported devices:
+    - AW20036 (3x12) 36 LEDs
+    - AW20054 (6x9)  54 LEDs
+    - AW20072 (6x12) 72 LEDs
+    - AW20108 (9x12) 108 LEDs
+
+  For more product information please see the link below:
+  aw20036 - https://www.awinic.com/en/productDetail/AW20036QNR#tech-docs
+  aw20054 - https://www.awinic.com/en/productDetail/AW20054QNR#tech-docs
+  aw20072 - https://www.awinic.com/en/productDetail/AW20072QNR#tech-docs
+  aw20108 - https://www.awinic.com/en/productDetail/AW20108QNR#tech-docs
+
+properties:
+  compatible:
+    enum:
+      - awinic,aw20036
+      - awinic,aw20054
+      - awinic,aw20072
+      - awinic,aw20108
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+
+patternProperties:
+  "^led@[0-9a-f]+$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          LED number
+        maxItems: 1
+
+      led-max-microamp:
+        default: 9780
+        description: |
+          Note that a driver will take the minimum of all LED limits
+          since the chip has a single global setting.
+          The maximum output current of each LED is calculated by the
+          following formula:
+            IMAXled = 160000 * (592 / 600.5) * (1 / max-current-switch-number)
+          And the minimum output current formula:
+            IMINled = 3300 * (592 / 600.5) * (1 / max-current-switch-number)
+          where max-current-switch-number is determined by led configuration
+          and depends on how leds are physically connected to the led driver.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: awinic,aw20036
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 36
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: awinic,aw20054
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 54
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: awinic,aw20072
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 72
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: awinic,aw20108
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                minimum: 0
+                maximum: 108
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@3a {
+            compatible = "awinic,aw20036";
+            reg = <0x3a>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+
+            led@0 {
+                reg = <0x0>;
+                color = <LED_COLOR_ID_RED>;
+                led-max-microamp = <9780>;
+            };
+
+            led@1 {
+                reg = <0x1>;
+                color = <LED_COLOR_ID_GREEN>;
+                led-max-microamp = <9780>;
+            };
+
+            led@2 {
+                reg = <0x2>;
+                color = <LED_COLOR_ID_BLUE>;
+                led-max-microamp = <9780>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/apple,dwi-bl.yaml b/Documentation/devicetree/bindings/leds/backlight/apple,dwi-bl.yaml
new file mode 100644
index 000000000000..29caeb356e6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/apple,dwi-bl.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/apple,dwi-bl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple DWI 2-Wire Interface Backlight Controller
+
+maintainers:
+  - Nick Chan <towinchenmi@gmail.com>
+
+description:
+  Apple SoCs contain a 2-wire interface called DWI. On some Apple iPhones,
+  iPads and iPod touches with a LCD display, 1-2 backlight controllers
+  are connected via DWI. Interfacing with DWI controls all backlight
+  controllers at the same time. As such, the backlight controllers are
+  treated as a single controller regardless of the underlying
+  configuration.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,s5l8960x-dwi-bl
+          - apple,t7000-dwi-bl
+          - apple,s8000-dwi-bl
+          - apple,t8010-dwi-bl
+          - apple,t8015-dwi-bl
+      - const: apple,dwi-bl
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      dwi_bl: backlight@20e200010 {
+        compatible = "apple,s5l8960x-dwi-bl", "apple,dwi-bl";
+        reg = <0x2 0x0e200010 0x0 0x8>;
+        power-domains = <&ps_dwi>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/arc,arc2c0608.yaml b/Documentation/devicetree/bindings/leds/backlight/arc,arc2c0608.yaml
new file mode 100644
index 000000000000..786beced5590
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/arc,arc2c0608.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/arc,arc2c0608.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ArcticSand arc2c0608 LED driver
+
+description: |
+  The ArcticSand arc2c0608 LED driver provides ultra
+  efficient notebook backlighting. Optional properties not
+  specified will default to values in IC EPROM.
+
+  Datasheet:
+  https://www.murata.com/-/media/webrenewal/products/power/power-semiconductor/overview/lineup/led-boost/arc2/arc2c0608.ashx.
+
+maintainers:
+  - Brian Dodge <bdodge@arcticsand.com>
+
+allOf:
+  - $ref: /schemas/leds/common.yaml
+
+properties:
+  compatible:
+    const: arc,arc2c0608
+
+  reg:
+    maxItems: 1
+
+  default-brightness:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 4095
+
+  led-sources:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: List of enabled channels
+    items:
+      enum: [0, 1, 2, 3, 4, 5]
+    minItems: 1
+    uniqueItems: true
+
+  arc,led-config-0:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fading speed (period between intensity
+      steps)
+
+  arc,led-config-1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: If set, sets ILED_CONFIG register. Used for
+      fine tuning the maximum LED current.
+
+  arc,dim-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: PWM mode frequency setting (bits [3:0] used)
+
+  arc,comp-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Setting for register CONFIG_COMP which
+      controls internal resitances, feed forward freqs,
+      and initial VOUT at startup. Consult the datasheet.
+
+  arc,filter-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: RC and PWM Filter settings.
+      Bit Assignment
+      7654 3    2    1    0
+      xxxx RCF1 RCF0 PWM1 PWM0
+      RCF statuses        PWM Filter Statues
+      00 = OFF (default)  00 = OFF (default)
+      01 = LOW            01 = 2 STEPS
+      10 - MEDIUM         10 = 4 STEPS
+      11 = HIGH           11 = 8 STEPS
+
+  arc,trim-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets percentage increase of Maximum LED
+      Current.
+      0x00 = 0% increase.
+      0x20 = 20.2%.
+      0x3F = 41.5%
+
+  label: true
+
+  linux,default-trigger: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@30 {
+            compatible = "arc,arc2c0608";
+            reg = <0x30>;
+            default-brightness = <500>;
+            label = "lcd-backlight";
+            linux,default-trigger = "backlight";
+            led-sources = <0 1 2 5>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
deleted file mode 100644
index 230abdefd6e7..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Binding for ArcticSand arc2c0608 LED driver
-
-Required properties:
-- compatible:		should be "arc,arc2c0608"
-- reg:			slave address
-
-Optional properties:
-- default-brightness:	brightness value on boot, value from: 0-4095
-- label:		The name of the backlight device
-			See Documentation/devicetree/bindings/leds/common.txt
-- led-sources:		List of enabled channels from 0 to 5.
-			See Documentation/devicetree/bindings/leds/common.txt
-
-- arc,led-config-0:	setting for register ILED_CONFIG_0
-- arc,led-config-1:	setting for register ILED_CONFIG_1
-- arc,dim-freq:		PWM mode frequence setting (bits [3:0] used)
-- arc,comp-config:	setting for register CONFIG_COMP
-- arc,filter-config:	setting for register FILTER_CONFIG
-- arc,trim-config:	setting for register IMAXTUNE
-
-Note: Optional properties not specified will default to values in IC EPROM
-
-Example:
-
-arc2c0608@30 {
-	compatible = "arc,arc2c0608";
-	reg = <0x30>;
-	default-brightness = <500>;
-	label = "lcd-backlight";
-	linux,default-trigger = "backlight";
-	led-sources = <0 1 2 5>;
-};
-
diff --git a/Documentation/devicetree/bindings/leds/backlight/awinic,aw99706.yaml b/Documentation/devicetree/bindings/leds/backlight/awinic,aw99706.yaml
new file mode 100644
index 000000000000..f48ce7a3434d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/awinic,aw99706.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/awinic,aw99706.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Awinic AW99706 6-channel WLED Backlight Driver
+
+maintainers:
+  - Junjie Cao <caojunjie650@gmail.com>
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: awinic,aw99706
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO to use to enable/disable the backlight (HWEN pin).
+    maxItems: 1
+
+  awinic,dim-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Select dimming mode of the device.
+        0 = Bypass mode.
+        1 = DC mode.
+        2 = MIX mode(PWM at low brightness and DC at high brightness).
+        3 = MIX-26k mode(MIX mode with different PWM frequency).
+    enum: [ 0, 1, 2, 3 ]
+    default: 1
+
+  awinic,sw-freq-hz:
+    description: Boost switching frequency in Hz.
+    enum: [ 300000, 400000, 500000, 600000, 660000, 750000, 850000, 1000000,
+            1200000, 1330000, 1500000, 1700000 ]
+    default: 750000
+
+  awinic,sw-ilmt-microamp:
+    description: Switching current limitation in uA.
+    enum: [ 1500000, 2000000, 2500000, 3000000 ]
+    default: 3000000
+
+  awinic,iled-max-microamp:
+    description: Maximum LED current setting in uA.
+    minimum: 5000
+    maximum: 50000
+    multipleOf: 500
+    default: 20000
+
+  awinic,uvlo-thres-microvolt:
+    description: UVLO(Under Voltage Lock Out) in uV.
+    enum: [ 2200000, 5000000 ]
+    default: 2200000
+
+  awinic,ramp-ctl:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Select ramp control and filter of the device.
+        0 = Fade in/fade out.
+        1 = Light filter.
+        2 = Medium filter.
+        3 = Heavy filter.
+    enum: [ 0, 1, 2, 3 ]
+    default: 2
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@76 {
+            compatible = "awinic,aw99706";
+            reg = <0x76>;
+            enable-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+            default-brightness = <2047>;
+            max-brightness = <4095>;
+            awinic,dim-mode = <1>;
+            awinic,sw-freq-hz = <750000>;
+            awinic,sw-ilmt-microamp = <3000000>;
+            awinic,uvlo-thres-microvolt = <2200000>;
+            awinic,iled-max-microamp = <20000>;
+            awinic,ramp-ctl = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml
index 702ba350d869..e0983e44934c 100644
--- a/Documentation/devicetree/bindings/leds/backlight/common.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Common backlight properties
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
@@ -33,4 +33,21 @@ properties:
       due to restrictions in a specific system, such as mounting conditions.
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  brightness-levels:
+    description:
+      Array of distinct brightness levels. The levels must be in the range
+      accepted by the underlying LED device. Typically these are in the range
+      from 0 to 255, but any range starting at 0 will do, as long as they are
+      accepted by the LED.
+      The 0 value means a 0% of brightness (darkest/off), while the last value
+      in the array represents a full 100% brightness (brightest).
+      If this array is not provided, the driver default mapping is used.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  default-brightness-level:
+    description:
+      The default brightness level (index into the array defined by the
+      "brightness-levels" property).
+    $ref: /schemas/types.yaml#/definitions/uint32
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
index 75cc569b9c55..584030b6b0b9 100644
--- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: gpio-backlight bindings
+title: gpio-backlight
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml
new file mode 100644
index 000000000000..b005065e0f48
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd2801.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd2801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD2801 one-wire backlight
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The Kinetic Technologies KTD2801 is a LED backlight driver controlled
+  by a single GPIO line. The driver can be controlled with a PWM signal
+  or by pulsing the GPIO line to set the backlight level. This is called
+  "ExpressWire".
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktd2801
+
+  ctrl-gpios:
+    maxItems: 1
+
+  default-brightness: true
+  max-brightness: true
+
+required:
+  - compatible
+  - ctrl-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight {
+        compatible = "kinetic,ktd2801";
+        ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
+        max-brightness = <210>;
+        default-brightness = <100>;
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
new file mode 100644
index 000000000000..c914e1276982
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTZ8866 backlight
+
+maintainers:
+  - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+  The Kinetic Technologies KTZ8866 is a high efficiency 6-channels-current-sinks
+  led backlight with dual lcd bias power.
+  https://www.kinet-ic.com/ktz8866/
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktz8866
+
+  reg:
+    maxItems: 1
+
+  vddpos-supply:
+    description: positive boost supply regulator.
+
+  vddneg-supply:
+    description: negative boost supply regulator.
+
+  enable-gpios:
+    description: GPIO to use to enable/disable the backlight (HWEN pin).
+    maxItems: 1
+
+  current-num-sinks:
+    description: number of the LED current sinks' channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4, 5, 6]
+
+  kinetic,current-ramp-delay-ms:
+    description: |
+      LED current ramping delay time in milliseconds, note that the
+      case 1 will be mapped to 1μs.
+    enum: [1, 2, 4, 8, 16, 32, 64, 128, 192, 256, 320, 384, 448, 512, 576, 640]
+
+  kinetic,led-enable-ramp-delay-ms:
+    description: |
+      LED on/off ramping delay time in milliseconds, note that the case 0 will be
+      mapped to 512μs because ktz8866 can't ramp faster than it.
+    enum: [0, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384]
+
+  kinetic,enable-lcd-bias:
+    description: Set if we want to output bias power supply for LCD.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - vddpos-supply
+  - vddneg-supply
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@11 {
+            compatible = "kinetic,ktz8866";
+            reg = <0x11>;
+            vddpos-supply = <&bl_vddpos_5p5>;
+            vddneg-supply = <&bl_vddneg_5p5>;
+            enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+            current-num-sinks = <5>;
+            kinetic,current-ramp-delay-ms = <128>;
+            kinetic,led-enable-ramp-delay-ms = <1>;
+            kinetic,enable-lcd-bias;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
index 625082bf3892..8fc5af8f27f9 100644
--- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: led-backlight bindings
+title: led-backlight
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
@@ -16,33 +16,20 @@ description:
   can also be used to describe a backlight device controlled by the output of
   a LED driver.
 
+allOf:
+  - $ref: common.yaml#
+
 properties:
   compatible:
     const: led-backlight
 
-  leds:
-    description: A list of LED nodes
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-
-  brightness-levels:
-    description:
-      Array of distinct brightness levels. The levels must be in the range
-      accepted by the underlying LED devices. This is used to translate a
-      backlight brightness level into a LED brightness level. If it is not
-      provided, the identity mapping is used.
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
-  default-brightness-level:
-    description:
-      The default brightness level (index into the array defined by the
-      "brightness-levels" property).
-    $ref: /schemas/types.yaml#/definitions/uint32
+  leds: true
 
 required:
   - compatible
   - leds
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
index 08fe5cf8614a..3c9b4054ed9a 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TI LM3630A High-Efficiency Dual-String White LED
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
new file mode 100644
index 000000000000..9416e1bfab92
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/lp855x-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LP855X backlight controllers
+
+maintainers:
+  - Artur Weber <aweber.kernel@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,lp8550
+      - ti,lp8551
+      - ti,lp8552
+      - ti,lp8553
+      - ti,lp8555
+      - ti,lp8556
+      - ti,lp8557
+
+  reg:
+    maxItems: 1
+
+  dev-ctrl:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      Value of device control register. This is a device-specific value.
+
+  bl-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Backlight device name.
+
+  init-brt:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: Initial value of backlight brightness.
+
+  power-supply:
+    description: Regulator which controls the 3V rail.
+
+  enable-supply:
+    description: Regulator which controls the EN/VDDIO input.
+
+  pwms:
+    maxItems: 1
+    description: |
+      PWM channel to use for controlling the backlight; setting this
+      enables the PWM-based backlight control mode.
+
+  pwm-names: true
+
+  pwm-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      PWM period value. Deprecated; set the period value in the pwms
+      property instead.
+    deprecated: true
+
+patternProperties:
+  "^rom-[0-9a-f]{2}h$":
+    type: object
+    description: Nodes containing the values of configuration registers.
+    additionalProperties: false
+    properties:
+      rom-addr:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: Register address of ROM area to be updated.
+
+      rom-val:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: Value to write to the ROM register.
+
+required:
+  - compatible
+  - reg
+  - dev-ctrl
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8555";
+            reg = <0x2c>;
+
+            dev-ctrl = /bits/ 8 <0x00>;
+
+            pwms = <&pwm 0 10000>;
+            pwm-names = "lp8555";
+
+            /* 4V OV, 4 output LED0 string enabled */
+            rom-14h {
+              rom-addr = /bits/ 8 <0x14>;
+              rom-val = /bits/ 8 <0xcf>;
+            };
+
+            /* Heavy smoothing, 24ms ramp time step */
+            rom-15h {
+              rom-addr = /bits/ 8 <0x15>;
+              rom-val = /bits/ 8 <0xc7>;
+            };
+
+            /* 4 output LED1 string enabled */
+            rom-19h {
+              rom-addr = /bits/ 8 <0x19>;
+              rom-val = /bits/ 8 <0x0f>;
+            };
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8556";
+            reg = <0x2c>;
+
+            bl-name = "lcd-bl";
+            dev-ctrl = /bits/ 8 <0x85>;
+            init-brt = /bits/ 8 <0x10>;
+        };
+      };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8557";
+            reg = <0x2c>;
+            enable-supply = <&backlight_vddio>;
+            power-supply = <&backlight_vdd>;
+
+            dev-ctrl = /bits/ 8 <0x41>;
+            init-brt = /bits/ 8 <0x0a>;
+
+            /* 4V OV, 4 output LED string enabled */
+            rom-14h {
+              rom-addr = /bits/ 8 <0x14>;
+              rom-val = /bits/ 8 <0xcf>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
deleted file mode 100644
index 88f56641fc28..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-lp855x bindings
-
-Required properties:
-  - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553",
-                "ti,lp8555", "ti,lp8556", "ti,lp8557"
-  - reg: I2C slave address (u8)
-  - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
-
-Optional properties:
-  - bl-name: Backlight device name (string)
-  - init-brt: Initial value of backlight brightness (u8)
-  - pwm-period: PWM period value. Set only PWM input mode used (u32)
-  - rom-addr: Register address of ROM area to be updated (u8)
-  - rom-val: Register value to be updated (u8)
-  - power-supply: Regulator which controls the 3V rail
-  - enable-supply: Regulator which controls the EN/VDDIO input
-
-Example:
-
-	/* LP8555 */
-	backlight@2c {
-		compatible = "ti,lp8555";
-		reg = <0x2c>;
-
-		dev-ctrl = /bits/ 8 <0x00>;
-		pwm-period = <10000>;
-
-		/* 4V OV, 4 output LED0 string enabled */
-		rom_14h {
-			rom-addr = /bits/ 8 <0x14>;
-			rom-val = /bits/ 8 <0xcf>;
-		};
-
-		/* Heavy smoothing, 24ms ramp time step */
-		rom_15h {
-			rom-addr = /bits/ 8 <0x15>;
-			rom-val = /bits/ 8 <0xc7>;
-		};
-
-		/* 4 output LED1 string enabled */
-		rom_19h {
-			rom-addr = /bits/ 8 <0x19>;
-			rom-val = /bits/ 8 <0x0f>;
-		};
-	};
-
-	/* LP8556 */
-	backlight@2c {
-		compatible = "ti,lp8556";
-		reg = <0x2c>;
-
-		bl-name = "lcd-bl";
-		dev-ctrl = /bits/ 8 <0x85>;
-		init-brt = /bits/ 8 <0x10>;
-	};
-
-	/* LP8557 */
-	backlight@2c {
-		compatible = "ti,lp8557";
-		reg = <0x2c>;
-		enable-supply = <&backlight_vddio>;
-		power-supply = <&backlight_vdd>;
-
-		dev-ctrl = /bits/ 8 <0x41>;
-		init-brt = /bits/ 8 <0x0a>;
-
-		/* 4V OV, 4 output LED string enabled */
-		rom_14h {
-			rom-addr = /bits/ 8 <0x14>;
-			rom-val = /bits/ 8 <0xcf>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt
deleted file mode 100644
index b4cffdaa4137..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-88pm860x-backlight bindings
-
-Optional properties:
-  - maxim,max8925-dual-string: whether support dual string
-
-Example:
-
-	backlights {
-		maxim,max8925-dual-string = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
new file mode 100644
index 000000000000..16fc98e71233
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Backlight
+
+maintainers:
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  The MT6370 Backlight WLED driver supports up to a 29V output voltage for
+  4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
+  capability with 2048 current steps (11 bits, only for MT6370/MT6371) or
+  16384 current steps (14 bits, only for MT6372) in exponential or linear
+  mapping curves.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6370-backlight
+      - mediatek,mt6372-backlight
+
+  default-brightness:
+    minimum: 0
+
+  max-brightness:
+    minimum: 0
+
+  enable-gpios:
+    description: External backlight 'enable' pin
+    maxItems: 1
+
+  mediatek,bled-pwm-enable:
+    description: |
+      Enable external PWM input for backlight dimming
+    type: boolean
+
+  mediatek,bled-pwm-hys-enable:
+    description: |
+      Enable the backlight input-hysteresis for PWM mode
+    type: boolean
+
+  mediatek,bled-pwm-hys-input-th-steps:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [1, 4, 16, 64]
+    description: |
+      The selection of the upper and lower bounds threshold of backlight
+      PWM resolution. If we choose selection 64, the variation of PWM
+      resolution needs more than 64 steps.
+
+  mediatek,bled-ovp-shutdown:
+    description: |
+      Enable the backlight shutdown when OVP level triggered
+    type: boolean
+
+  mediatek,bled-ovp-microvolt:
+    enum: [17000000, 21000000, 25000000, 29000000]
+    description: |
+      Backlight OVP level selection.
+
+  mediatek,bled-ocp-shutdown:
+    description: |
+      Enable the backlight shutdown when OCP level triggered.
+    type: boolean
+
+  mediatek,bled-ocp-microamp:
+    enum: [900000, 1200000, 1500000, 1800000]
+    description: |
+      Backlight OC level selection.
+
+  mediatek,bled-exponential-mode-enable:
+    description: |
+      Enable the exponential mode of backlight brightness. If this property
+      is not enabled, the default is to use linear mode.
+    type: boolean
+
+  mediatek,bled-channel-use:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Backlight LED channel to be used.
+      Each bit mapping to:
+        - 0: CH4
+        - 1: CH3
+        - 2: CH2
+        - 3: CH1
+    minimum: 1
+    maximum: 15
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: mediatek,mt6372-backlight
+
+then:
+  properties:
+    default-brightness:
+      maximum: 16384
+
+    max-brightness:
+      maximum: 16384
+
+else:
+  properties:
+    default-brightness:
+      maximum: 2048
+
+    max-brightness:
+      maximum: 2048
+
+required:
+  - compatible
+  - mediatek,bled-channel-use
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
new file mode 100644
index 000000000000..527a37368ed7
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mps,mp3309c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MPS MP3309C backlight
+
+maintainers:
+  - Flavio Suligoi <f.suligoi@asem.it>
+
+description: |
+  The Monolithic Power (MPS) MP3309C is a WLED step-up converter, featuring a
+  programmable switching frequency to optimize efficiency.
+  It supports two different dimming modes:
+
+  - analog mode, via I2C commands, as default mode (32 dimming levels)
+  - PWM controlled mode (optional)
+
+  The datasheet is available at:
+  https://www.monolithicpower.com/en/mp3309c.html
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: mps,mp3309c
+
+  reg:
+    maxItems: 1
+
+  pwms:
+    description: if present, the backlight is controlled in PWM mode.
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO used to enable the backlight in "analog-i2c" dimming mode.
+    maxItems: 1
+
+  mps,overvoltage-protection-microvolt:
+    description: Overvoltage protection (13.5V, 24V or 35.5V).
+    enum: [ 13500000, 24000000, 35500000 ]
+    default: 35500000
+
+  mps,no-sync-mode:
+    description: disable synchronous rectification mode
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Backlight with PWM control */
+        backlight_pwm: backlight@17 {
+            compatible = "mps,mp3309c";
+            reg = <0x17>;
+            pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
+            brightness-levels = <0 4 8 16 32 64 128 255>;
+            default-brightness = <6>;
+            mps,overvoltage-protection-microvolt = <24000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
index fcb8429f3088..b71f6454a4ac 100644
--- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
@@ -4,13 +4,16 @@
 $id: http://devicetree.org/schemas/leds/backlight/pwm-backlight.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: pwm-backlight bindings
+title: pwm-backlight
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
+allOf:
+  - $ref: common.yaml#
+
 properties:
   compatible:
     const: pwm-backlight
@@ -39,21 +42,6 @@ properties:
       Delay in ms between disabling the backlight using GPIO and setting PWM
       value to 0.
 
-  brightness-levels:
-    description:
-      Array of distinct brightness levels. Typically these are in the range
-      from 0 to 255, but any range starting at 0 will do. The actual brightness
-      level (PWM duty cycle) will be interpolated from these values. 0 means a
-      0% duty cycle (darkest/off), while the last value in the array represents
-      a 100% duty cycle (brightest).
-    $ref: /schemas/types.yaml#/definitions/uint32-array
-
-  default-brightness-level:
-    description:
-      The default brightness level (index into the array defined by the
-      "brightness-levels" property).
-    $ref: /schemas/types.yaml#/definitions/uint32
-
   num-interpolated-steps:
     description:
       Number of interpolated steps between each value of brightness-levels
@@ -68,9 +56,8 @@ dependencies:
 required:
   - compatible
   - pwms
-  - power-supply
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index d839e75d9788..a8490781011d 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -4,11 +4,11 @@
 $id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for Qualcomm Technologies, Inc. WLED driver
+title: Qualcomm Technologies, Inc. WLED driver
 
 maintainers:
-  - Bjorn Andersson <bjorn.andersson@linaro.org>
-  - Kiran Gunda <kgunda@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
+  - Kiran Gunda <quic_kgunda@quicinc.com>
 
 description: |
   WLED (White Light Emitting Diode) driver is used for controlling display
@@ -19,13 +19,16 @@ properties:
   compatible:
     enum:
       - qcom,pm8941-wled
+      - qcom,pmi8950-wled
       - qcom,pmi8994-wled
       - qcom,pmi8998-wled
       - qcom,pm660l-wled
+      - qcom,pm6150l-wled
       - qcom,pm8150l-wled
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   default-brightness:
     description: |
@@ -80,7 +83,7 @@ properties:
     description: |
       kHz; switching frequency.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 
+    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
             2400, 3200, 4800, 9600 ]
 
   qcom,ovp:
@@ -170,6 +173,9 @@ allOf:
 
     then:
       properties:
+        reg:
+          maxItems: 1
+
         qcom,current-boost-limit:
           enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ]
           default: 805
@@ -188,6 +194,9 @@ allOf:
 
     else:
       properties:
+        reg:
+          minItems: 2
+
         qcom,current-boost-limit:
           enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ]
           default: 970
diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
index e0ac68694b63..99e9e138fa92 100644
--- a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
@@ -47,6 +47,11 @@ properties:
     minimum: 0
     maximum: 3
 
+  richtek,bled-ocp-microamp:
+    description: |
+      Backlight over current protection level.
+    enum: [900000, 1200000, 1500000, 1800000]
+
   richtek,channel-use:
     description: |
       Backlight LED channel to be used.
diff --git a/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml b/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml
new file mode 100644
index 000000000000..482fae71dd53
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/ti,lm3509.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/ti,lm3509.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LM3509 High Efficiency Boost for White LED's and/or OLED Displays
+
+maintainers:
+  - Patrick Gansterer <paroga@paroga.com>
+
+description:
+  The LM3509 current mode boost converter offers two separate outputs.
+  https://www.ti.com/product/LM3509
+
+properties:
+  compatible:
+    const: ti,lm3509
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reset-gpios:
+    maxItems: 1
+
+  ti,brightness-rate-of-change-us:
+    description: Brightness Rate of Change in microseconds.
+    enum: [51, 13000, 26000, 52000]
+
+  ti,oled-mode:
+    description: Enable OLED mode.
+    type: boolean
+
+patternProperties:
+  "^led@[01]$":
+    type: object
+    description: Properties for a string of connected LEDs.
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        description:
+          The control register that is used to program the two current sinks.
+          The LM3509 has two registers (BMAIN and BSUB) and are represented
+          as 0 or 1 in this property. The two current sinks can be controlled
+          independently with both registers, or register BMAIN can be
+          configured to control both sinks with the led-sources property.
+        minimum: 0
+        maximum: 1
+
+      label: true
+
+      led-sources:
+        minItems: 1
+        maxItems: 2
+        items:
+          minimum: 0
+          maximum: 1
+
+      default-brightness:
+        minimum: 0
+        maximum: 31
+        default: 18
+
+      max-brightness:
+        minimum: 0
+        maximum: 31
+        default: 31
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@36 {
+            compatible = "ti,lm3509";
+            reg = <0x36>;
+            reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+            ti,oled-mode;
+            ti,brightness-rate-of-change-us = <52000>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0>;
+                led-sources = <0 1>;
+                label = "lcd-backlight";
+                default-brightness = <12>;
+                max-brightness = <31>;
+            };
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@36 {
+            compatible = "ti,lm3509";
+            reg = <0x36>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0>;
+                default-brightness = <12>;
+            };
+
+            led@1 {
+                reg = <1>;
+                default-brightness = <15>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/ti,lp8864.yaml b/Documentation/devicetree/bindings/leds/backlight/ti,lp8864.yaml
new file mode 100644
index 000000000000..d44232d462bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/ti,lp8864.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/ti,lp8864.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - LP8864/LP8866 4/6-Channel LED Driver family
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+  - Alexander Sverdlin <alexander.sverdlin@siemens.com>
+
+description: |
+  LP8866-Q1, LP8866S-Q1, LP8864-Q1, LP8864S-Q1 are display LED-backlight drivers
+  with 4/6 channels. LED brightness can be controlled globally through the I2C
+  interface or PWM input.
+
+  For more product information please see the links below:
+    https://www.ti.com/product/LP8864-Q1
+    https://www.ti.com/product/LP8864S-Q1
+    https://www.ti.com/product/LP8866-Q1
+    https://www.ti.com/product/LP8866S-Q1
+
+properties:
+  compatible:
+    const: ti,lp8864
+
+  reg:
+    maxItems: 1
+    description: I2C slave address
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable (active high) / disable the device
+
+  vled-supply:
+    description: LED supply
+
+  led:
+    type: object
+    $ref: common.yaml#
+    properties:
+      function: true
+      color: true
+      label: true
+      linux,default-trigger: true
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@3a {
+            compatible = "ti,lp8864";
+            reg = <0x3a>;
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            vled-supply = <&vbatt>;
+
+            led {
+                function = LED_FUNCTION_BACKLIGHT;
+                color = <LED_COLOR_ID_WHITE>;
+                linux,default-trigger = "backlight";
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt
deleted file mode 100644
index ff5c92138650..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Zodiac Inflight Innovations RAVE Supervisory Processor Backlight Bindings
-
-RAVE SP backlight device is a "MFD cell" device corresponding to
-backlight functionality of RAVE Supervisory Processor. It is expected
-that its Device Tree node is specified as a child of the node
-corresponding to the parent RAVE SP device (as documented in
-Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
-
-Required properties:
-
-- compatible: Should be "zii,rave-sp-backlight"
-
-Example:
-
-	rave-sp {
-		compatible = "zii,rave-sp-rdu1";
-		current-speed = <38400>;
-
-		backlight {
-			compatible = "zii,rave-sp-backlight";
-		};
-	}
-
diff --git a/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.yaml
new file mode 100644
index 000000000000..ee93a3e64852
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/zii,rave-sp-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zodiac Inflight Innovations RAVE Supervisory Processor Backlight
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  RAVE SP backlight device is a "MFD cell" device corresponding to
+  backlight functionality of RAVE Supervisory Processor. It is expected
+  that its Device Tree node is specified as a child of the node
+  corresponding to the parent RAVE SP device (as documented in
+  Documentation/devicetree/bindings/mfd/zii,rave-sp.yaml)
+
+properties:
+  compatible:
+    const: zii,rave-sp-backlight
+
+required:
+  - compatible
+
+allOf:
+  - $ref: common.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    backlight {
+        compatible = "zii,rave-sp-backlight";
+    };
+
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 697102707703..f4e44b33f56d 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -43,7 +43,7 @@ properties:
       LED_COLOR_ID available, add a new one.
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
-    maximum: 9
+    maximum: 14
 
   function-enumerator:
     description:
@@ -62,7 +62,7 @@ properties:
   default-state:
     description:
       The initial state of the LED. If the LED is already on or off and the
-      default-state property is set the to same value, then no glitch should be
+      default-state property is set to the same value, then no glitch should be
       produced where the LED momentarily turns off (or on). The "keep" setting
       will keep the LED at whatever its current state is, without producing a
       glitch.
@@ -79,24 +79,63 @@ properties:
       the LED.
     $ref: /schemas/types.yaml#/definitions/string
 
-    enum:
-        # LED will act as a back-light, controlled by the framebuffer system
-      - backlight
-        # LED will turn on (but for leds-gpio see "default-state" property in
-        # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
-      - default-on
-        # LED "double" flashes at a load average based rate
-      - heartbeat
-        # LED indicates disk activity
-      - disk-activity
-        # LED indicates IDE disk activity (deprecated), in new implementations
-        # use "disk-activity"
-      - ide-disk
-        # LED flashes at a fixed, configurable rate
-      - timer
-        # LED alters the brightness for the specified duration with one software
-        # timer (requires "led-pattern" property)
-      - pattern
+    oneOf:
+      - enum:
+            # LED will act as a back-light, controlled by the framebuffer system
+          - backlight
+            # LED will turn on (see also "default-state" property)
+          - default-on
+            # LED "double" flashes at a load average based rate
+          - heartbeat
+            # LED indicates disk activity
+          - disk-activity
+            # LED indicates disk read activity
+          - disk-read
+            # LED indicates disk write activity
+          - disk-write
+            # LED flashes at a fixed, configurable rate
+          - timer
+            # LED alters the brightness for the specified duration with one software
+            # timer (requires "led-pattern" property)
+          - pattern
+            # LED indicates mic mute state
+          - audio-micmute
+            # LED indicates audio mute state
+          - audio-mute
+            # LED indicates bluetooth power state
+          - bluetooth-power
+            # LED indicates camera flash state
+          - flash
+            # LED indicated keyboard capslock
+          - kbd-capslock
+            # LED indicates MTD memory activity
+          - mtd
+            # LED indicates NAND memory activity (deprecated),
+            # in new implementations use "mtd"
+          - nand-disk
+            # LED indicates network activity
+          - netdev
+            # No trigger assigned to the LED. This is the default mode
+            # if trigger is absent
+          - none
+            # LED indicates remote control feedback
+          - rc-feedback
+            # LED indicates camera torch state
+          - torch
+            # LED indicates USB gadget activity
+          - usb-gadget
+            # LED indicates USB host activity
+          - usb-host
+            # LED indicates USB port state
+          - usbport
+        # LED is triggered by CPU activity
+      - pattern: "^cpu[0-9]*$"
+        # LED is triggered by Bluetooth activity
+      - pattern: "^hci[0-9]+-power$"
+        # LED is triggered by SD/MMC activity
+      - pattern: "^mmc[0-9]+$"
+        # LED is triggered by WLAN activity
+      - pattern: "^phy[0-9]+tx$"
 
   led-pattern:
     description: |
@@ -122,6 +161,24 @@ properties:
       For flash LED controllers with configurable current this property is
       mandatory for the LEDs in the non-flash modes (e.g. torch or indicator).
 
+  max-brightness:
+    description:
+      Normally, the maximum brightness is determined by the hardware, and this
+      property is not required. This property is used to set a software limit.
+      It could happen that an LED is made so bright that it gets damaged or
+      causes damage due to restrictions in a specific system, such as mounting
+      conditions.
+      Note that this flag is mainly used for PWM-LEDs, where it is not possible
+      to map brightness to current. Drivers for other controllers should use
+      led-max-microamp.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  default-brightness:
+    description:
+      Brightness to be set if LED's default state is on. Used only during
+      initialization. If the option is not set then max brightness is used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
   panic-indicator:
     description:
       This property specifies that the LED should be used, if at all possible,
@@ -144,6 +201,8 @@ properties:
       each of them having its own LED assigned (assuming they are not
       hardwired). In such cases this property should contain phandle(s) of
       related source device(s).
+      Another example is a GPIO line that will be monitored and mirror the
+      state of the line (with or without inversion flags) to the LED.
       In many cases LED can be related to more than one device (e.g. one USB LED
       vs. multiple USB ports). Each source should be represented by a node in
       the device tree and be referenced by a phandle and a set of phandle
@@ -151,6 +210,24 @@ properties:
       #trigger-source-cells property in the source node.
     $ref: /schemas/types.yaml#/definitions/phandle-array
 
+  active-high:
+    type: boolean
+    description:
+      Makes LED active high. To turn the LED ON, line needs to be
+      set to high voltage instead of low.
+
+  active-low:
+    type: boolean
+    description:
+      Makes LED active low. To turn the LED ON, line needs to be
+      set to low voltage instead of high.
+
+  inactive-high-impedance:
+    type: boolean
+    description:
+      Set LED to high-impedance mode to turn the LED OFF. LED might also
+      describe this mode as tristate.
+
   # Required properties for flash LED child nodes:
   flash-max-microamp:
     description:
@@ -162,6 +239,14 @@ properties:
       Maximum timeout in microseconds after which the flash LED is turned off.
       Required for flash LED nodes with configurable timeout.
 
+allOf:
+  - if:
+      required:
+        - active-low
+    then:
+      properties:
+        active-high: false
+
 additionalProperties: true
 
 examples:
@@ -185,9 +270,11 @@ examples:
         };
     };
 
-    led-controller@0 {
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
         compatible = "maxim,max77693-led";
-        reg = <0 0x100>;
 
         led {
             function = LED_FUNCTION_FLASH;
@@ -199,6 +286,9 @@ examples:
         };
     };
 
+  - |
+    #include <dt-bindings/leds/common.h>
+
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
index c7ed2871da06..f52f6304c79e 100644
--- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -23,6 +23,12 @@ properties:
     description: I2C slave address of the microcontroller.
     maxItems: 1
 
+  interrupts:
+    description:
+      Specifier for the global LED brightness changed by front button press
+      interrupt.
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -32,8 +38,9 @@ properties:
 patternProperties:
   "^multi-led@[0-9a-b]$":
     type: object
-    allOf:
-      - $ref: leds-class-multicolor.yaml#
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
     description:
       This node represents one of the RGB LED devices on Turris Omnia.
       No subnodes need to be added for subchannels since this controller only
@@ -55,15 +62,17 @@ additionalProperties: false
 examples:
   - |
 
+    #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/leds/common.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         led-controller@2b {
             compatible = "cznic,turris-omnia-leds";
             reg = <0x2b>;
+            interrupts-extended = <&mcu 11 IRQ_TYPE_NONE>;
             #address-cells = <1>;
             #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
deleted file mode 100644
index cbe8dfd29715..000000000000
--- a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Device tree bindings for IR LED connected through gpio pin which is used as
-remote controller transmitter.
-
-Required properties:
-	- compatible: should be "gpio-ir-tx".
-	- gpios :  Should specify the IR LED GPIO, see "gpios property" in
-	  Documentation/devicetree/bindings/gpio/gpio.txt.  Active low LEDs
-	  should be indicated using flags in the GPIO specifier.
-
-Example:
-	irled@0 {
-		compatible = "gpio-ir-tx";
-		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml
new file mode 100644
index 000000000000..5839d00c7089
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/gpio-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through GPIO pin
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED connected through GPIO pin which is used as remote controller
+  transmitter.
+
+properties:
+  compatible:
+    const: gpio-ir-tx
+
+  gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    irled {
+        compatible = "gpio-ir-tx";
+        gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml b/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml
new file mode 100644
index 000000000000..72cadebf6e3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/ir-spi-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through SPI bus
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED switch is connected to the MOSI line of the SPI device and the data
+  is delivered through that.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: ir-spi-led
+
+  reg:
+    maxItems: 1
+
+  duty-cycle:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [50, 60, 70, 75, 80, 90]
+    description:
+      Percentage of one period in which the signal is active.
+
+  led-active-low:
+    type: boolean
+    description:
+      Output is negated with a NOT gate.
+
+  power-supply: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        irled@0 {
+            compatible = "ir-spi-led";
+            reg = <0x0>;
+
+            duty-cycle = /bits/ 8 <60>;
+            led-active-low;
+            power-supply = <&irda_regulator>;
+            spi-max-frequency = <5000000>;
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
deleted file mode 100644
index 66e5672c2e3d..000000000000
--- a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Device tree bindings for IR LED connected through pwm pin which is used as
-remote controller transmitter.
-
-Required properties:
-	- compatible: should be "pwm-ir-tx".
-	- pwms : PWM property to point to the PWM device (phandle)/port (id)
-	  and to specify the period time to be used: <&phandle id period_ns>;
-
-Example:
-	irled {
-		compatible = "pwm-ir-tx";
-		pwms = <&pwm0 0 10000000>;
-	};
diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml
new file mode 100644
index 000000000000..7526e3149f72
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/pwm-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through PWM pin
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED connected through PWM pin which is used as remote controller
+  transmitter.
+
+properties:
+  compatible:
+    oneOf:
+      - const: pwm-ir-tx
+      - const: nokia,n900-ir
+        deprecated: true
+
+  pwms:
+    maxItems: 1
+
+required:
+  - compatible
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    irled {
+        compatible = "pwm-ir-tx";
+        pwms = <&pwm0 0 10000000>;
+    };
diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
deleted file mode 100644
index 83ff1b4d70a6..000000000000
--- a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Device tree bindings for IR LED connected through SPI bus which is used as
-remote controller.
-
-The IR LED switch is connected to the MOSI line of the SPI device and the data
-are delivered thourgh that.
-
-Required properties:
-	- compatible: should be "ir-spi-led".
-
-Optional properties:
-	- duty-cycle: 8 bit value that represents the percentage of one period
-	  in which the signal is active.  It can be 50, 60, 70, 75, 80 or 90.
-	- led-active-low: boolean value that specifies whether the output is
-	  negated with a NOT gate.
-	- power-supply: specifies the power source. It can either be a regulator
-	  or a gpio which enables a regulator, i.e. a regulator-fixed as
-	  described in
-	  Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
-
-Example:
-
-	irled@0 {
-		compatible = "ir-spi-led";
-		reg = <0x0>;
-		spi-max-frequency = <5000000>;
-		power-supply = <&vdd_led>;
-		led-active-low;
-		duty-cycle = /bits/ 8 <60>;
-	};
diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
new file mode 100644
index 000000000000..906735acfbaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/issi,is31fl319x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ISSI LED Controllers for IS31FL319{0,1,3,6,9}
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+description: |
+  The IS31FL319X are LED controllers with I2C interface.
+  Previously known as Si-En SN319{0,1,3,6,9}.
+
+  For more product information please see the links below:
+    https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf
+
+properties:
+  compatible:
+    enum:
+      - issi,is31fl3190
+      - issi,is31fl3191
+      - issi,is31fl3193
+      - issi,is31fl3196
+      - issi,is31fl3199
+      - si-en,sn3190
+      - si-en,sn3191
+      - si-en,sn3193
+      - si-en,sn3196
+      - si-en,sn3199
+
+  reg:
+    maxItems: 1
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO attached to the SDB pin.
+
+  audio-gain-db:
+    default: 0
+    description: Audio gain selection for external analog modulation input.
+    enum: [0, 3, 6, 9, 12, 15, 18, 21]
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[1-9]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: Index of the LED.
+        minimum: 1
+        maximum: 9
+
+      led-max-microamp:
+        description:
+          Note that a driver will take the lowest of all LED limits
+          since the chip has a single global setting. The lowest value
+          will be chosen due to the PWM specificity, where lower
+          brightness is achieved by reducing the duty-cycle of pulses
+          and not the current, which will always have its peak value
+          equal to led-max-microamp.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3190
+              - issi,is31fl3191
+              - issi,is31fl3193
+              - si-en,sn3190
+              - si-en,sn3191
+              - si-en,sn3193
+    then:
+      properties:
+        reg:
+          enum: [0x68, 0x69, 0x6a, 0x6b]
+
+        audio-gain-db: false
+
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            led-max-microamp:
+              default: 42000
+              enum: [5000, 10000, 17500, 30000, 42000]
+    else:
+      properties:
+        reg:
+          enum: [0x64, 0x65, 0x66, 0x67]
+
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            led-max-microamp:
+              default: 20000
+              enum: [5000, 10000, 15000, 20000, 25000, 30000, 35000, 40000]
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3190
+              - issi,is31fl3191
+              - si-en,sn3190
+              - si-en,sn3191
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3193
+              - si-en,sn3193
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3196
+              - si-en,sn3196
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 6
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@65 {
+            compatible = "issi,is31fl3196";
+            reg = <0x65>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+
+            led@1 {
+                reg = <1>;
+                label = "red:aux";
+                led-max-microamp = <10000>;
+            };
+
+            led@5 {
+                reg = <5>;
+                label = "green:power";
+                linux,default-trigger = "default-on";
+            };
+        };
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd202x.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd202x.yaml
new file mode 100644
index 000000000000..832c030a5acf
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/kinetic,ktd202x.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/kinetic,ktd202x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic KTD2026/7 RGB/White LED Driver
+
+maintainers:
+  - André Apitzsch <git@apitzsch.eu>
+
+description: |
+  The KTD2026/7 is a RGB/White LED driver with I2C interface.
+
+  The data sheet can be found at:
+    https://www.kinet-ic.com/uploads/KTD2026-7-04h.pdf
+
+properties:
+  compatible:
+    enum:
+      - kinetic,ktd2026
+      - kinetic,ktd2027
+
+  reg:
+    maxItems: 1
+
+  vin-supply:
+    description: Regulator providing power to the "VIN" pin.
+
+  vio-supply:
+    description: Regulator providing power for pull-up of the I/O lines.
+      Note that this regulator does not directly connect to KTD2026, but is
+      needed for the correct operation of the status ("ST") and I2C lines.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-3]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            description: Index of the LED.
+            minimum: 0
+            maximum: 3
+
+        required:
+          - reg
+          - color
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+patternProperties:
+  "^led@[0-3]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: Index of the LED.
+        minimum: 0
+        maximum: 3
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@30 {
+            compatible = "kinetic,ktd2026";
+            reg = <0x30>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            vin-supply = <&pm8916_l17>;
+            vio-supply = <&pm8916_l6>;
+
+            led@0 {
+                reg = <0>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_RED>;
+            };
+
+            led@1 {
+                reg = <1>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_GREEN>;
+            };
+
+            led@2 {
+                reg = <2>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_BLUE>;
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@30 {
+            compatible = "kinetic,ktd2026";
+            reg = <0x30>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            vin-supply = <&pm8916_l17>;
+            vio-supply = <&pm8916_l6>;
+
+            multi-led {
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_STATUS;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                    reg = <1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                    reg = <2>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
new file mode 100644
index 000000000000..bac95a51afa1
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/kinetic,ktd2692.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: KTD2692 Flash LED Driver from Kinetic Technologies
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+description: |
+  KTD2692 is the ideal power solution for high-power flash LEDs.
+  It uses ExpressWire single-wire programming for maximum flexibility.
+
+  The ExpressWire interface through CTRL pin can control LED on/off and
+  enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+  Flash timeout, LVP(low voltage protection).
+
+  Also, When the AUX pin is pulled high while CTRL pin is high,
+  LED current will be ramped up to the flash-mode current level.
+
+properties:
+  compatible:
+    const: kinetic,ktd2692
+
+  ctrl-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  aux-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  vin-supply:
+    description: LED supply (2.7V to 5.5V).
+
+  led:
+    type: object
+    $ref: common.yaml#
+    description: Properties for the LED.
+    properties:
+      function: true
+      color: true
+      flash-max-timeout-us:
+        description: Flash LED maximum timeout.
+
+      led-max-microamp:
+        maximum: 300000
+        description: Minimum Threshold for Timer protection
+          is defined internally (Maximum 300mA).
+
+      flash-max-microamp:
+        maximum: 300000
+        description: Flash LED maximum current
+          Formula - I(uA) = 15000000 / Rset.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ctrl-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    ktd2692 {
+      compatible = "kinetic,ktd2692";
+      ctrl-gpios = <&gpc0 1 0>;
+      aux-gpios = <&gpc0 2 0>;
+      vin-supply = <&vbat>;
+
+      led {
+        function = LED_FUNCTION_FLASH;
+        color = <LED_COLOR_ID_WHITE>;
+        flash-max-timeout-us = <250000>;
+        flash-max-microamp = <150000>;
+        led-max-microamp = <25000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
deleted file mode 100644
index 62ed17ec075b..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-aat1290.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
-
-The device is controlled through two pins: FL_EN and EN_SET. The pins when,
-asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
-respectively. In order to add a capability of selecting the strobe signal source
-(e.g. CPU or camera sensor) there is an additional switch required, independent
-of the flash chip. The switch is controlled with pin control.
-
-Required properties:
-
-- compatible : Must be "skyworks,aat1290".
-- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
-- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
-
-Optional properties:
-- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
-		"default" and "host" must refer to the same pin configuration
-		node, which sets the host as a strobe signal provider. Entry
-		"isp" must refer to the pin configuration node, which sets the
-		ISP as a strobe signal provider.
-
-A discrete LED element connected to the device must be represented by a child
-node - see Documentation/devicetree/bindings/leds/common.txt.
-
-Required properties of the LED child node:
-- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-                       Maximum flash LED supply current can be calculated using
-                       following formula: I = 1A * 162kohm / Rset.
-- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
-                         Maximum flash timeout can be calculated using following
-                         formula: T = 8.82 * 10^9 * Ct.
-
-Optional properties of the LED child node:
-- function : see Documentation/devicetree/bindings/leds/common.txt
-- color : see Documentation/devicetree/bindings/leds/common.txt
-- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-
-Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
-a switch that allows for routing strobe signal either from the host or from
-the camera sensor):
-
-#include "exynos4412.dtsi"
-#include <dt-bindings/leds/common.h>
-
-led-controller {
-	compatible = "skyworks,aat1290";
-	flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
-	enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default", "host", "isp";
-	pinctrl-0 = <&camera_flash_host>;
-	pinctrl-1 = <&camera_flash_host>;
-	pinctrl-2 = <&camera_flash_isp>;
-
-	camera_flash: led {
-		function = LED_FUNCTION_FLASH;
-		color = <LED_COLOR_ID_WHITE>;
-		led-max-microamp = <520833>;
-		flash-max-microamp = <1012500>;
-		flash-max-timeout-us = <1940000>;
-	};
-};
-
-&pinctrl_0 {
-	camera_flash_host: camera-flash-host {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-val = <0>;
-	};
-
-	camera_flash_isp: camera-flash-isp {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-val = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-an30259a.txt b/Documentation/devicetree/bindings/leds/leds-an30259a.txt
deleted file mode 100644
index cbd833906b2b..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-an30259a.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Panasonic AN30259A 3-channel LED driver
-
-The AN30259A is a LED controller capable of driving three LEDs independently. It supports
-constant current output and sloping current output modes. The chip is connected over I2C.
-
-Required properties:
-	- compatible: Must be "panasonic,an30259a".
-	- reg: I2C slave address.
-	- #address-cells: Must be 1.
-	- #size-cells: Must be 0.
-
-Each LED is represented as a sub-node of the panasonic,an30259a node.
-
-Required sub-node properties:
-	- reg: Pin that the LED is connected to. Must be 1, 2, or 3.
-
-Optional sub-node properties:
-	- function :
-		see Documentation/devicetree/bindings/leds/common.txt
-	- color :
-		see Documentation/devicetree/bindings/leds/common.txt
-	- label :
-		see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-	- linux,default-trigger :
-		see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-#include <dt-bindings/leds/common.h>
-
-led-controller@30 {
-	compatible = "panasonic,an30259a";
-	reg = <0x30>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	led@1 {
-		reg = <1>;
-		linux,default-trigger = "heartbeat";
-		function = LED_FUNCTION_INDICATOR;
-		color = <LED_COLOR_ID_RED>;
-	};
-
-	led@2 {
-		reg = <2>;
-		function = LED_FUNCTION_INDICATOR;
-		color = <LED_COLOR_ID_GREEN>;
-	};
-
-	led@3 {
-		reg = <3>;
-		function = LED_FUNCTION_INDICATOR;
-		color = <LED_COLOR_ID_BLUE>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
index e24b0d15ef01..26238446f2bd 100644
--- a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
@@ -20,9 +20,20 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+    description: Open-drain, low active interrupt pin "INTN".
+      Used to report completion of operations (power up, LED breath effects).
+
   vcc-supply:
     description: Regulator providing power to the "VCC" pin.
 
+  vio-supply:
+    description: Regulator providing power for pull-up of the I/O lines.
+      "VIO1" in the typical application circuit example of the datasheet.
+      Note that this regulator does not directly connect to AW2013, but is
+      needed for the correct operation of the interrupt and I2C lines.
+
   "#address-cells":
     const: 1
 
@@ -33,6 +44,7 @@ patternProperties:
   "^led@[0-2]$":
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
@@ -51,15 +63,17 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/leds/common.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         led-controller@45 {
             compatible = "awinic,aw2013";
             reg = <0x45>;
+            interrupts = <42 IRQ_TYPE_LEVEL_LOW>;
             #address-cells = <1>;
             #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
new file mode 100644
index 000000000000..62326507c1aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's BCM63138 LEDs controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  This LEDs controller was first used on BCM63138 and later reused on BCM4908,
+  BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs.
+
+  It supports up to 32 LEDs that can be connected parallelly or serially. It
+  also includes limited support for hardware blinking.
+
+  Binding serially connected LEDs isn't documented yet.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm4908-leds
+              - brcm,bcm6848-leds
+              - brcm,bcm6858-leds
+              - brcm,bcm63148-leds
+              - brcm,bcm63381-leds
+              - brcm,bcm68360-leds
+          - const: brcm,bcm63138-leds
+      - const: brcm,bcm63138-leds
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  brcm,serial-shift-bits:
+    minimum: 1
+    maximum: 32
+    description:
+      This describes the number of 8-bit serial shifters connected to the LED
+      controller block. The hardware is typically using 8-bit shift registers
+      with 8 LEDs per shift register, so 4 shifters results in 32 LEDs or 2
+      shifters give 16 LEDs etc, but the hardware supports any odd number of
+      registers. If left unspecified, the hardware boot-time default is used.
+
+patternProperties:
+  "^led@[a-f0-9]+$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        maxItems: 1
+        description: LED pin number
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    leds@ff800800 {
+        compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
+        reg = <0xff800800 0xdc>;
+        brcm,serial-shift-bits = <16>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+            reg = <0x0>;
+            function = LED_FUNCTION_POWER;
+            color = <LED_COLOR_ID_GREEN>;
+            default-state = "on";
+        };
+
+        led@3 {
+            reg = <0x3>;
+            function = LED_FUNCTION_STATUS;
+            color = <LED_COLOR_ID_GREEN>;
+            active-low;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
deleted file mode 100644
index a555d94084b7..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
+++ /dev/null
@@ -1,319 +0,0 @@
-LEDs connected to Broadcom BCM6328 controller
-
-This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
-In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
-However, on some devices there are Serial LEDs (LEDs connected to a 74x164
-controller), which can either be controlled by software (exporting the 74x164
-as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml),
-or by hardware using this driver.
-Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
-exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
-controlled, so the only chance to keep them working is by using this driver.
-
-BCM6328 LED controller has a HWDIS register, which controls whether a LED
-should be controlled by a hardware signal instead of the MODE register value,
-with 0 meaning hardware control enabled and 1 hardware control disabled. This
-is usually 1:1 for hardware to LED signals, but through the activity/link
-registers you have some limited control over rerouting the LEDs (as
-explained later in brcm,link-signal-sources). Even if a LED is hardware
-controlled you are still able to make it blink or light it up if it isn't,
-but you can't turn it off if the hardware decides to light it up. For this
-reason, hardware controlled LEDs aren't registered as LED class devices.
-
-Required properties:
-  - compatible : should be "brcm,bcm6328-leds".
-  - #address-cells : must be 1.
-  - #size-cells : must be 0.
-  - reg : BCM6328 LED controller address and size.
-
-Optional properties:
-  - brcm,serial-leds : Boolean, enables Serial LEDs.
-    Default : false
-  - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing.
-    Default : false
-  - brcm,serial-clk-low : Boolean, makes clock signal active low.
-    Default : false
-  - brcm,serial-dat-low : Boolean, makes data signal active low.
-    Default : false
-  - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction.
-    Default : false
-
-Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
-
-LED sub-node required properties:
-  - reg : LED pin number (only LEDs 0 to 23 are valid).
-
-LED sub-node optional properties:
-  a) Optional properties for sub-nodes related to software controlled LEDs:
-    - label : see Documentation/devicetree/bindings/leds/common.txt
-    - active-low : Boolean, makes LED active low.
-      Default : false
-    - default-state : see
-      Documentation/devicetree/bindings/leds/common.txt
-    - linux,default-trigger : see
-      Documentation/devicetree/bindings/leds/common.txt
-
-  b) Optional properties for sub-nodes related to hardware controlled LEDs:
-    - brcm,hardware-controlled : Boolean, makes this LED hardware controlled.
-      Default : false
-    - brcm,link-signal-sources : An array of hardware link
-      signal sources. Up to four link hardware signals can get muxed into
-      these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
-      be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
-      4 to 7. A signal can be muxed to more than one LED, and one LED can
-      have more than one source signal.
-    - brcm,activity-signal-sources : An array of hardware activity
-      signal sources. Up to four activity hardware signals can get muxed into
-      these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
-      be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
-      4 to 7. A signal can be muxed to more than one LED, and one LED can
-      have more than one source signal.
-
-Examples:
-Scenario 1 : BCM6328 with 4 EPHY LEDs
-	leds0: led-controller@10000800 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10000800 0x24>;
-
-		alarm_red@2 {
-			reg = <2>;
-			active-low;
-			label = "red:alarm";
-		};
-		inet_green@3 {
-			reg = <3>;
-			active-low;
-			label = "green:inet";
-		};
-		power_green@4 {
-			reg = <4>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-		ephy0_spd@17 {
-			reg = <17>;
-			brcm,hardware-controlled;
-		};
-		ephy1_spd@18 {
-			reg = <18>;
-			brcm,hardware-controlled;
-		};
-		ephy2_spd@19 {
-			reg = <19>;
-			brcm,hardware-controlled;
-		};
-		ephy3_spd@20 {
-			reg = <20>;
-			brcm,hardware-controlled;
-		};
-	};
-
-Scenario 2 : BCM63268 with Serial/GPHY0 LEDs
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-		brcm,serial-leds;
-		brcm,serial-dat-low;
-		brcm,serial-shift-inv;
-
-		gphy0_spd0@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-		};
-		gphy0_spd1@1 {
-			reg = <1>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <1>;
-		};
-		inet_red@2 {
-			reg = <2>;
-			active-low;
-			label = "red:inet";
-		};
-		dsl_green@3 {
-			reg = <3>;
-			active-low;
-			label = "green:dsl";
-		};
-		usb_green@4 {
-			reg = <4>;
-			active-low;
-			label = "green:usb";
-		};
-		wps_green@7 {
-			reg = <7>;
-			active-low;
-			label = "green:wps";
-		};
-		inet_green@8 {
-			reg = <8>;
-			active-low;
-			label = "green:inet";
-		};
-		ephy0_act@9 {
-			reg = <9>;
-			brcm,hardware-controlled;
-		};
-		ephy1_act@10 {
-			reg = <10>;
-			brcm,hardware-controlled;
-		};
-		ephy2_act@11 {
-			reg = <11>;
-			brcm,hardware-controlled;
-		};
-		gphy0_act@12 {
-			reg = <12>;
-			brcm,hardware-controlled;
-		};
-		ephy0_spd@13 {
-			reg = <13>;
-			brcm,hardware-controlled;
-		};
-		ephy1_spd@14 {
-			reg = <14>;
-			brcm,hardware-controlled;
-		};
-		ephy2_spd@15 {
-			reg = <15>;
-			brcm,hardware-controlled;
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 3 : BCM6362 with 1 LED for each EPHY
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-			brcm,activity-signal-sources = <0>;
-			/* USB link/activity routed to USB LED */
-		};
-		inet@1 {
-			reg = <1>;
-			brcm,hardware-controlled;
-			brcm,activity-signal-sources = <1>;
-			/* INET activity routed to INET LED */
-		};
-		ephy0@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4>;
-			/* EPHY0 link routed to EPHY0 LED */
-		};
-		ephy1@5 {
-			reg = <5>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <5>;
-			/* EPHY1 link routed to EPHY1 LED */
-		};
-		ephy2@6 {
-			reg = <6>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <6>;
-			/* EPHY2 link routed to EPHY2 LED */
-		};
-		ephy3@7 {
-			reg = <7>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <7>;
-			/* EPHY3 link routed to EPHY3 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 4 : BCM6362 with 1 LED for all EPHYs
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0 1>;
-			brcm,activity-signal-sources = <0 1>;
-			/* USB/INET link/activity routed to USB LED */
-		};
-		ephy@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4 5 6 7>;
-			/* EPHY0/1/2/3 link routed to EPHY0 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 5 : BCM6362 with EPHY LEDs swapped
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-			brcm,activity-signal-sources = <0 1>;
-			/* USB link/act and INET act routed to USB LED */
-		};
-		ephy0@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <7>;
-			/* EPHY3 link routed to EPHY0 LED */
-		};
-		ephy1@5 {
-			reg = <5>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <6>;
-			/* EPHY2 link routed to EPHY1 LED */
-		};
-		ephy2@6 {
-			reg = <6>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <5>;
-			/* EPHY1 link routed to EPHY2 LED */
-		};
-		ephy3@7 {
-			reg = <7>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4>;
-			/* EPHY0 link routed to EPHY3 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
new file mode 100644
index 000000000000..f3a3ef992929
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
@@ -0,0 +1,400 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-bcm6328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to Broadcom BCM6328 controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description: |
+  This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
+  In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
+  However, on some devices there are Serial LEDs (LEDs connected to a 74x164
+  controller), which can either be controlled by software (exporting the 74x164
+  as spi-gpio. See
+  Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware
+  using this driver.
+  Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
+  exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
+  controlled, so the only chance to keep them working is by using this driver.
+
+  BCM6328 LED controller has a HWDIS register, which controls whether a LED
+  should be controlled by a hardware signal instead of the MODE register value,
+  with 0 meaning hardware control enabled and 1 hardware control disabled. This
+  is usually 1:1 for hardware to LED signals, but through the activity/link
+  registers you have some limited control over rerouting the LEDs (as
+  explained later in brcm,link-signal-sources). Even if a LED is hardware
+  controlled you are still able to make it blink or light it up if it isn't,
+  but you can't turn it off if the hardware decides to light it up. For this
+  reason, hardware controlled LEDs aren't registered as LED class devices.
+
+  Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
+
+properties:
+  compatible:
+    const: brcm,bcm6328-leds
+
+  reg:
+    maxItems: 1
+
+  brcm,serial-leds:
+    type: boolean
+    description: Enables Serial LEDs.
+
+  brcm,serial-mux:
+    type: boolean
+    description: Enables Serial LEDs multiplexing.
+
+  brcm,serial-clk-low:
+    type: boolean
+    description: Makes clock signal active low.
+
+  brcm,serial-dat-low:
+    type: boolean
+    description: Makes data signal active low.
+
+  brcm,serial-shift-inv:
+    type: boolean
+    description: Inverts Serial LEDs shift direction.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "@[a-f0-9]+$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        items:
+          - maximum: 23
+        description: LED pin number (only LEDs 0 to 23 are valid).
+
+      brcm,hardware-controlled:
+        type: boolean
+        description: Makes this LED hardware controlled.
+
+      brcm,link-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware link signal sources. Up to four link hardware
+          signals can get muxed into these LEDs. Only valid for LEDs 0 to 7,
+          where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and signals 4 to
+          7 may be muxed to LEDs 4 to 7. A signal can be muxed to more than one
+          LED, and one LED can have more than one source signal.
+
+      brcm,activity-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware activity signal sources. Up to four activity
+          hardware signals can get muxed into these LEDs. Only valid for LEDs 0
+          to 7, where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and
+          signals 4 to 7 may be muxed to LEDs 4 to 7. A signal can be muxed to
+          more than one LED, and one LED can have more than one source signal.
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    /* BCM6328 with 4 EPHY LEDs */
+    led-controller@10000800 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10000800 0x24>;
+
+        alarm_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:alarm";
+        };
+
+        inet_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:inet";
+        };
+
+        power_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+
+        ephy0_spd@17 {
+            reg = <17>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@18 {
+            reg = <18>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@19 {
+            reg = <19>;
+            brcm,hardware-controlled;
+        };
+
+        ephy3_spd@20 {
+            reg = <20>;
+            brcm,hardware-controlled;
+        };
+    };
+  - |
+    /* BCM63268 with Serial/GPHY0 LEDs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+        brcm,serial-leds;
+        brcm,serial-dat-low;
+        brcm,serial-shift-inv;
+
+        gphy0_spd0@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+        };
+
+        gphy0_spd1@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <1>;
+        };
+
+        inet_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:inet";
+        };
+
+        dsl_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:dsl";
+        };
+
+        usb_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:usb";
+        };
+
+        wps_green@7 {
+            reg = <7>;
+            active-low;
+            label = "green:wps";
+        };
+
+        inet_green@8 {
+            reg = <8>;
+            active-low;
+            label = "green:inet";
+        };
+
+        ephy0_act@9 {
+            reg = <9>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_act@10 {
+            reg = <10>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_act@11 {
+            reg = <11>;
+            brcm,hardware-controlled;
+        };
+
+        gphy0_act@12 {
+            reg = <12>;
+            brcm,hardware-controlled;
+        };
+
+        ephy0_spd@13 {
+            reg = <13>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@14 {
+            reg = <14>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@15 {
+            reg = <15>;
+            brcm,hardware-controlled;
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for each EPHY */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0>;
+            /* USB link/activity routed to USB LED */
+        };
+
+        inet@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,activity-signal-sources = <1>;
+            /* INET activity routed to INET LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for all EPHYs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0 1>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB/INET link/activity routed to USB LED */
+        };
+
+        ephy@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4 5 6 7>;
+            /* EPHY0/1/2/3 link routed to EPHY0 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with EPHY LEDs swapped */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB link/act and INET act routed to USB LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
index 6e51c6b91ee5..211ffc3c4a20 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -25,8 +25,6 @@ LED sub-node required properties:
 
 LED sub-node optional properties:
   - label : see Documentation/devicetree/bindings/leds/common.txt
-  - active-low : Boolean, makes LED active low.
-    Default : false
   - default-state : see
     Documentation/devicetree/bindings/leds/common.txt
   - linux,default-trigger : see
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index 37445c68cdef..bb40bb9e036e 100644
--- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Common properties for the multicolor LED class.
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   Bindings for multi color LEDs show how to describe current outputs of
@@ -19,22 +19,22 @@ description: |
   LED class.  Common LED nodes and properties are inherited from the common.yaml
   within this documentation directory.
 
-patternProperties:
-  "^multi-led@([0-9a-f])$":
-    type: object
-    description: Represents the LEDs that are to be grouped.
-    properties:
-      color:
-        description: |
-          For multicolor LED support this property should be defined as either
-          LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-          include/linux/leds/common.h.
-        enum: [ 8, 9 ]
-
-    $ref: "common.yaml#"
-
-    required:
-      - color
+properties:
+  $nodename:
+    pattern: "^multi-led(@[0-9a-f])?$"
+
+  color:
+    description: |
+      For multicolor LED support this property should be defined as either
+      LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
+      include/dt-bindings/leds/common.h.
+    enum: [ 8, 9 ]
+
+required:
+  - color
+
+allOf:
+  - $ref: common.yaml#
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/leds/leds-consumer.yaml b/Documentation/devicetree/bindings/leds/leds-consumer.yaml
new file mode 100644
index 000000000000..fe6a0faa1d3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-consumer.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common leds consumer
+
+maintainers:
+  - Aleksandrs Vinarskis <alex@vinarskis.com>
+
+description:
+  Some LED defined in DT are required by other DT consumers, for example
+  v4l2 subnode may require privacy or flash LED. Unlike trigger-source
+  approach which is typically used as 'soft' binding, referencing LED
+  devices by phandle makes things simpler when 'hard' binding is desired.
+
+  Document LED properties that its consumers may define.
+
+select: true
+
+properties:
+  leds:
+    oneOf:
+      - type: object
+      - $ref: /schemas/types.yaml#/definitions/phandle-array
+        description:
+          A list of LED device(s) required by a particular consumer.
+        items:
+          maxItems: 1
+
+  led-names:
+    description:
+      A list of device name(s). Used to map LED devices to their respective
+      functions, when consumer requires more than one LED.
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    leds {
+        compatible = "gpio-leds";
+
+        privacy_led: privacy-led {
+            color = <LED_COLOR_ID_RED>;
+            default-state = "off";
+            function = LED_FUNCTION_INDICATOR;
+            gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      v4l2_node: camera@36 {
+        reg = <0x36>;
+
+        leds = <&privacy_led>;
+        led-names = "privacy";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
index 7ad2baeda0b0..7e11703acbd6 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
@@ -23,8 +23,8 @@ patternProperties:
   # node name to at least catch some child nodes.
   "(^led-[0-9a-f]$|led)":
     type: object
-
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       gpios:
diff --git a/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml
new file mode 100644
index 000000000000..5c9cfa39396b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-group-multicolor.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-group-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Multi-color LED built with monochromatic LEDs
+
+maintainers:
+  - Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+
+description: |
+  This driver combines several monochromatic LEDs into one multi-color
+  LED using the multicolor LED class.
+
+properties:
+  compatible:
+    const: leds-group-multicolor
+
+  leds: true
+
+required:
+  - leds
+
+allOf:
+  - $ref: leds-class-multicolor.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    monochromatic-leds {
+        compatible = "gpio-leds";
+
+        led0: led-0 {
+            gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
+            color = <LED_COLOR_ID_RED>;
+        };
+
+        led1: led-1 {
+            gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
+            color = <LED_COLOR_ID_GREEN>;
+        };
+
+        led2: led-2 {
+            gpios = <&mcu_pio 2 GPIO_ACTIVE_HIGH>;
+            color = <LED_COLOR_ID_BLUE>;
+        };
+    };
+
+    multi-led {
+        compatible = "leds-group-multicolor";
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_INDICATOR;
+        leds = <&led0>, <&led1>, <&led2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
deleted file mode 100644
index 676d43ec8169..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-LEDs connected to is31fl319x LED controller chip
-
-Required properties:
-- compatible : Should be any of
-	"issi,is31fl3190"
-	"issi,is31fl3191"
-	"issi,is31fl3193"
-	"issi,is31fl3196"
-	"issi,is31fl3199"
-	"si-en,sn3199".
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- reg: 0x64, 0x65, 0x66, or 0x67.
-
-Optional properties:
-- audio-gain-db : audio gain selection for external analog modulation input.
-	Valid values: 0 - 21, step by 3 (rounded down)
-	Default: 0
-- shutdown-gpios : Specifier of the GPIO connected to SDB pin of the chip.
-
-Each led is represented as a sub-node of the issi,is31fl319x device.
-There can be less leds subnodes than the chip can support but not more.
-
-Required led sub-node properties:
-- reg : number of LED line
-	Valid values: 1 - number of leds supported by the chip variant.
-
-Optional led sub-node properties:
-- label : see Documentation/devicetree/bindings/leds/common.txt.
-- linux,default-trigger :
-	see Documentation/devicetree/bindings/leds/common.txt.
-- led-max-microamp : (optional)
-	Valid values: 5000 - 40000, step by 5000 (rounded down)
-	Default: 20000 (20 mA)
-	Note: a driver will take the lowest of all led limits since the
-	chip has a single global setting. The lowest value will be chosen
-	due to the PWM specificity, where lower brightness is achieved
-	by reducing the dury-cycle of pulses and not the current, which
-	will always have its peak value equal to led-max-microamp.
-
-Examples:
-
-fancy_leds: leds@65 {
-	compatible = "issi,is31fl3196";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x65>;
-	shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-
-	red_aux: led@1 {
-		label = "red:aux";
-		reg = <1>;
-		led-max-microamp = <10000>;
-	};
-
-	green_power: led@5 {
-		label = "green:power";
-		reg = <5>;
-		linux,default-trigger = "default-on";
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
deleted file mode 100644
index 853737452580..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Kinetic Technologies - KTD2692 Flash LED Driver
-
-KTD2692 is the ideal power solution for high-power flash LEDs.
-It uses ExpressWire single-wire programming for maximum flexibility.
-
-The ExpressWire interface through CTRL pin can control LED on/off and
-enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
-Flash timeout, LVP(low voltage protection).
-
-Also, When the AUX pin is pulled high while CTRL pin is high,
-LED current will be ramped up to the flash-mode current level.
-
-Required properties:
-- compatible : Should be "kinetic,ktd2692".
-- ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
-- aux-gpios : Specifier of the GPIO connected to AUX pin.
-
-Optional properties:
-- vin-supply : "vin" LED supply (2.7V to 5.5V).
-  See Documentation/devicetree/bindings/regulator/regulator.txt
-
-A discrete LED element connected to the device must be represented by a child
-node - See Documentation/devicetree/bindings/leds/common.txt
-
-Required properties for flash LED child nodes:
-  See Documentation/devicetree/bindings/leds/common.txt
-- led-max-microamp : Minimum Threshold for Timer protection
-  is defined internally (Maximum 300mA).
-- flash-max-microamp : Flash LED maximum current
-  Formula : I(mA) = 15000 / Rset.
-- flash-max-timeout-us : Flash LED maximum timeout.
-
-Optional properties for flash LED child nodes:
-- label : See Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-ktd2692 {
-	compatible = "kinetic,ktd2692";
-	ctrl-gpios = <&gpc0 1 0>;
-	aux-gpios = <&gpc0 2 0>;
-	vin-supply = <&vbat>;
-
-	flash-led {
-		label = "ktd2692-flash";
-		led-max-microamp = <300000>;
-		flash-max-microamp = <1500000>;
-		flash-max-timeout-us = <1835000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml
index f8d7963c3a13..8b3b3bf1eaf2 100644
--- a/Documentation/devicetree/bindings/leds/leds-lgm.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml
@@ -56,7 +56,8 @@ properties:
 
     patternProperties:
       "^led@[0-2]$":
-        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
 
         properties:
           reg:
@@ -64,6 +65,9 @@ properties:
             minimum: 0
             maximum: 2
 
+          led-gpios:
+            maxItems: 1
+
           intel,sso-hw-trigger:
             type: boolean
             description: This property indicates Hardware driven/control LED.
@@ -118,14 +122,14 @@ examples:
           reg = <0>;
           function = "gphy";
           color = <LED_COLOR_ID_GREEN>;
-          led-gpio = <&ssogpio 0 0>;
+          led-gpios = <&ssogpio 0 0>;
         };
 
         led@2 {
           reg = <2>;
           function = LED_FUNCTION_POWER;
           color = <LED_COLOR_ID_GREEN>;
-          led-gpio = <&ssogpio 23 0>;
+          led-gpios = <&ssogpio 23 0>;
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
deleted file mode 100644
index b1103d961d6c..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-* Texas Instruments - LM3692x Highly Efficient White LED Driver
-
-The LM3692x is an ultra-compact, highly efficient,
-white-LED driver designed for LCD display backlighting.
-
-The main difference between the LM36922 and LM36923 is the number of
-LED strings it supports.  The LM36922 supports two strings while the LM36923
-supports three strings.
-
-Required properties:
-	- compatible:
-		"ti,lm36922"
-		"ti,lm36923"
-	- reg :  I2C slave address
-	- #address-cells : 1
-	- #size-cells : 0
-
-Optional properties:
-	- enable-gpios : gpio pin to enable/disable the device.
-	- vled-supply : LED supply
-	- ti,ovp-microvolt: Overvoltage protection in
-	    micro-volt, can be 17000000, 21000000, 25000000 or
-	    29000000. If ti,ovp-microvolt is not specified it
-	    defaults to 29000000.
-
-Required child properties:
-	- reg : 0 - Will enable all LED sync paths
-		1 - Will enable the LED1 sync
-		2 - Will enable the LED2 sync
-		3 - Will enable the LED3 sync (LM36923 only)
-
-Optional child properties:
-	- function : see Documentation/devicetree/bindings/leds/common.txt
-	- color : see Documentation/devicetree/bindings/leds/common.txt
-	- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-	- linux,default-trigger :
-	   see Documentation/devicetree/bindings/leds/common.txt
-	- led-max-microamp :
-	   see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-#include <dt-bindings/leds/common.h>
-
-led-controller@36 {
-	compatible = "ti,lm3692x";
-	reg = <0x36>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	vled-supply = <&vbatt>;
-	ti,ovp-microvolt = <29000000>;
-
-	led@0 {
-		reg = <0>;
-		function = LED_FUNCTION_BACKLIGHT;
-		color = <LED_COLOR_ID_WHITE>;
-		linux,default-trigger = "backlight";
-		led-max-microamp = <20000>;
-	};
-}
-
-For more product information please see the link below:
-https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
index c192b5feadc7..23f809906ba7 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: LED driver for LP50XX RGB LED from Texas Instruments.
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
@@ -55,8 +55,9 @@ properties:
 patternProperties:
   '^multi-led@[0-9a-f]$':
     type: object
-    allOf:
-      - $ref: leds-class-multicolor.yaml#
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
     properties:
       reg:
         minItems: 1
@@ -66,10 +67,29 @@ patternProperties:
           for the child node.  The LED modules can either be used stand alone
           or grouped into a module bank.
 
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
     patternProperties:
-      "(^led-[0-9a-f]$|led)":
+      "^led@[0-9a-f]+$":
         type: object
         $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            items:
+              - minimum: 0
+                maximum: 2
+
+            description:
+              This property denotes the index within the LED bank.
+
+        required:
+          - reg
 
 required:
   - compatible
@@ -79,60 +99,66 @@ additionalProperties: false
 
 examples:
   - |
-   #include <dt-bindings/gpio/gpio.h>
-   #include <dt-bindings/leds/common.h>
-
-   i2c {
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       led-controller@14 {
-           compatible = "ti,lp5009";
-           reg = <0x14>;
-           #address-cells = <1>;
-           #size-cells = <0>;
-           enable-gpios = <&gpio1 16>;
-
-           multi-led@1 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x1>;
-               color = <LED_COLOR_ID_RGB>;
-               function = LED_FUNCTION_CHARGING;
-
-               led-0 {
-                   color = <LED_COLOR_ID_RED>;
-               };
-
-               led-1 {
-                   color = <LED_COLOR_ID_GREEN>;
-               };
-
-               led-2 {
-                   color = <LED_COLOR_ID_BLUE>;
-               };
-          };
-
-          multi-led@2 {
-            #address-cells = <1>;
-            #size-cells = <2>;
-            reg = <0x2 0x3 0x5>;
-            color = <LED_COLOR_ID_RGB>;
-            function = LED_FUNCTION_STANDBY;
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
 
-            led-6 {
-              color = <LED_COLOR_ID_RED>;
-            };
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-            led-7 {
-              color = <LED_COLOR_ID_GREEN>;
+        led-controller@14 {
+            compatible = "ti,lp5009";
+            reg = <0x14>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            enable-gpios = <&gpio1 16>;
+
+            multi-led@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x1>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_CHARGING;
+
+                led@0 {
+                     reg = <0x0>;
+                     color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                     reg = <0x1>;
+                     color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                     reg = <0x2>;
+                     color = <LED_COLOR_ID_BLUE>;
+                };
             };
 
-            led-8 {
-              color = <LED_COLOR_ID_BLUE>;
+            multi-led@3 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x3>, <0x4>, <0x5>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_STANDBY;
+
+                led@0 {
+                    reg = <0x0>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                    reg = <0x1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                    reg = <0x2>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
             };
-         };
-       };
+        };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
index f552cd143d5b..fe8aaecf3010 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -28,6 +28,7 @@ properties:
       - national,lp5523
       - ti,lp55231
       - ti,lp5562
+      - ti,lp5569
       - ti,lp8501
 
   reg:
@@ -43,11 +44,13 @@ properties:
       - 1 # internal
       - 2 # external
 
-  enable-gpio:
+  enable-gpios:
     maxItems: 1
     description: |
       GPIO attached to the chip's enable pin
 
+  label: true
+
   pwr-sel:
     $ref: /schemas/types.yaml#/definitions/uint8
     description: |
@@ -64,10 +67,59 @@ properties:
   '#size-cells':
     const: 0
 
+  ti,charge-pump-mode:
+    description:
+      Set the operating mode of the internal charge pump as defined in
+      <dt-bindings/leds/leds-lp55xx.h>.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 3 # auto
+    maximum: 3
+
 patternProperties:
-  "(^led@[0-9a-f]$|led)":
+  '^multi-led@[0-8]$':
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maximum: 8
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^led@[0-8]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          led-cur:
+            $ref: /schemas/types.yaml#/definitions/uint8
+            description: |
+              Current setting at each LED channel (mA x10, 0 if LED is not connected)
+            minimum: 0
+            maximum: 255
+
+          max-cur:
+            $ref: /schemas/types.yaml#/definitions/uint8
+            description: Maximum current at each LED channel.
+
+          reg:
+            maximum: 8
+
+        required:
+          - reg
+
+  "^led@[0-8]$":
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
+
     properties:
       led-cur:
         $ref: /schemas/types.yaml#/definitions/uint8
@@ -78,7 +130,7 @@ patternProperties:
 
       max-cur:
         $ref: /schemas/types.yaml#/definitions/uint8
-        description: Maximun current at each LED channel.
+        description: Maximum current at each LED channel.
 
       reg:
         description: |
@@ -100,6 +152,16 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/string
         description: name of channel
 
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          const: ti,lp8501
+then:
+  properties:
+    pwr-sel: false
+
 required:
   - compatible
   - reg
@@ -108,119 +170,121 @@ additionalProperties: false
 
 examples:
   - |
-   #include <dt-bindings/leds/common.h>
-
-   i2c {
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       led-controller@32 {
-           #address-cells = <1>;
-           #size-cells = <0>;
-           compatible = "ti,lp8501";
-           reg = <0x32>;
-           clock-mode = /bits/ 8 <2>;
-           pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
-
-           led@0 {
-               reg = <0>;
-               chan-name = "d1";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@1 {
-               reg = <1>;
-               chan-name = "d2";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@2 {
-               reg = <2>;
-               chan-name = "d3";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@3 {
-               reg = <3>;
-               chan-name = "d4";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@4 {
-               reg = <4>;
-               chan-name = "d5";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@5 {
-               reg = <5>;
-               chan-name = "d6";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@6 {
-               reg = <6>;
-               chan-name = "d7";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@7 {
-               reg = <7>;
-               chan-name = "d8";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@8 {
-               reg = <8>;
-               chan-name = "d9";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/leds/leds-lp55xx.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@32 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "ti,lp8501";
+            reg = <0x32>;
+            clock-mode = /bits/ 8 <2>;
+            pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
+            ti,charge-pump-mode = <LP55XX_CP_BYPASS>;
+
+            led@0 {
+                reg = <0>;
+                chan-name = "d1";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@1 {
+                reg = <1>;
+                chan-name = "d2";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@2 {
+                reg = <2>;
+                chan-name = "d3";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@3 {
+                reg = <3>;
+                chan-name = "d4";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@4 {
+                reg = <4>;
+                chan-name = "d5";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@5 {
+                reg = <5>;
+                chan-name = "d6";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@6 {
+                reg = <6>;
+                chan-name = "d7";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@7 {
+                reg = <7>;
+                chan-name = "d8";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@8 {
+                reg = <8>;
+                chan-name = "d9";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
         };
 
-       led-controller@33 {
-           #address-cells = <1>;
-           #size-cells = <0>;
-           compatible = "national,lp5523";
-           reg = <0x33>;
-           clock-mode = /bits/ 8 <0>;
-
-           multi-led@2 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x2>;
-               color = <LED_COLOR_ID_RGB>;
-               function = LED_FUNCTION_STANDBY;
-               linux,default-trigger = "heartbeat";
-
-               led@0 {
-                   led-cur = /bits/ 8 <50>;
-                   max-cur = /bits/ 8 <100>;
-                   reg = <0x0>;
-                   color = <LED_COLOR_ID_GREEN>;
-               };
-
-               led@1 {
-                   led-cur = /bits/ 8 <50>;
-                   max-cur = /bits/ 8 <100>;
-                   reg = <0x1>;
-                   color = <LED_COLOR_ID_BLUE>;
-               };
-
-               led@6 {
-                   led-cur = /bits/ 8 <50>;
-                   max-cur = /bits/ 8 <100>;
-                   reg = <0x6>;
-                   color = <LED_COLOR_ID_RED>;
-               };
+        led-controller@33 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "national,lp5523";
+            reg = <0x33>;
+            clock-mode = /bits/ 8 <0>;
+
+            multi-led@2 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x2>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_STANDBY;
+                linux,default-trigger = "heartbeat";
+
+                led@0 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x0>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@1 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x1>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+
+                led@6 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x6>;
+                    color = <LED_COLOR_ID_RED>;
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
deleted file mode 100644
index 8bb25749a3da..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Texas Instruments - lp8860 4-Channel LED Driver
-
-The LP8860-Q1 is an high-efficiency LED
-driver with boost controller. It has 4 high-precision
-current sinks that can be controlled by a PWM input
-signal, a SPI/I2C master, or both.
-
-Required properties:
-	- compatible :
-		"ti,lp8860"
-	- reg : I2C slave address
-	- #address-cells : 1
-	- #size-cells : 0
-
-Optional properties:
-	- enable-gpios : gpio pin to enable (active high)/disable the device.
-	- vled-supply : LED supply
-
-Required child properties:
-	- reg : 0
-
-Optional child properties:
-	- function : see Documentation/devicetree/bindings/leds/common.txt
-	- color : see Documentation/devicetree/bindings/leds/common.txt
-	- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-	- linux,default-trigger :
-	   see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-#include <dt-bindings/leds/common.h>
-
-led-controller@2d {
-	compatible = "ti,lp8860";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x2d>;
-	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	vled-supply = <&vbatt>;
-
-	led@0 {
-		reg = <0>;
-		function = LED_FUNCTION_BACKLIGHT;
-		color = <LED_COLOR_ID_WHITE>;
-		linux,default-trigger = "backlight";
-	};
-}
-
-For more product information please see the link below:
-https://www.ti.com/product/lp8860-q1
diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
index c6f96cabd4d1..fdb08f44a45d 100644
--- a/Documentation/devicetree/bindings/leds/leds-max77650.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
@@ -30,9 +30,8 @@ properties:
 
 patternProperties:
   "^led@[0-2]$":
-    type: object
-    description: |
-      Properties for a single LED.
+    $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
@@ -41,10 +40,6 @@ patternProperties:
         minimum: 0
         maximum: 2
 
-      label: true
-
-      linux,default-trigger: true
-
 required:
   - compatible
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
deleted file mode 100644
index 45bf9f7d85f3..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-mt6323.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Device Tree Bindings for LED support on MT6323 PMIC
-
-MT6323 LED controller is subfunction provided by MT6323 PMIC, so the LED
-controllers are defined as the subnode of the function node provided by MT6323
-PMIC controller that is being defined as one kind of Muti-Function Device (MFD)
-using shared bus called PMIC wrapper for each subfunction to access remote
-MT6323 PMIC hardware.
-
-For MT6323 MFD bindings see:
-Documentation/devicetree/bindings/mfd/mt6397.txt
-For MediaTek PMIC wrapper bindings see:
-Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
-
-Required properties:
-- compatible : Must be "mediatek,mt6323-led"
-- address-cells : Must be 1
-- size-cells : Must be 0
-
-Each led is represented as a child node of the mediatek,mt6323-led that
-describes the initial behavior for each LED physically and currently only four
-LED child nodes can be supported.
-
-Required properties for the LED child node:
-- reg : LED channel number (0..3)
-
-Optional properties for the LED child node:
-- label : See Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger : See Documentation/devicetree/bindings/leds/common.txt
-- default-state: See Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-	mt6323: pmic {
-		compatible = "mediatek,mt6323";
-
-		...
-
-		mt6323led: leds {
-			compatible = "mediatek,mt6323-led";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			led@0 {
-				reg = <0>;
-				label = "LED0";
-				linux,default-trigger = "timer";
-				default-state = "on";
-			};
-			led@1 {
-				reg = <1>;
-				label = "LED1";
-				default-state = "off";
-			};
-			led@2 {
-				reg = <2>;
-				label = "LED2";
-				default-state = "on";
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
new file mode 100644
index 000000000000..d2e1d8afc302
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  This module is part of the MT6360 MFD device.
+  see Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
+  Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
+  and 4-channel RGB LED support Register/Flash/Breath Mode
+
+properties:
+  compatible:
+    const: mediatek,mt6360-led
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^multi-led@[0-5]$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: Index of the LED.
+        enum:
+          - 0 # LED output ISINK1
+          - 1 # LED output ISINK2
+          - 2 # LED output ISINK3
+          - 3 # LED output ISINKML
+          - 4 # LED output FLASH1
+          - 5 # LED output FLASH2
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            enum: [0, 1, 2]
+
+        required:
+          - reg
+          - color
+
+    required:
+      - reg
+      - "#address-cells"
+      - "#size-cells"
+
+  "^led@[0-5]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for a single LED.
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3, 4, 5]
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+    led-controller {
+        compatible = "mediatek,mt6360-led";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        multi-led@0 {
+            reg = <0>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_RGB>;
+            led-max-microamp = <24000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            led@0 {
+                reg = <0>;
+                color = <LED_COLOR_ID_RED>;
+            };
+            led@1 {
+                reg = <1>;
+                color = <LED_COLOR_ID_GREEN>;
+            };
+            led@2 {
+                reg = <2>;
+                color = <LED_COLOR_ID_BLUE>;
+            };
+        };
+        led@3 {
+            reg = <3>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <150000>;
+        };
+        led@4 {
+            reg = <4>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <1>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1024000>;
+        };
+        led@5 {
+            reg = <5>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <2>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1024000>;
+        };
+    };
+
+  - |
+    led-controller {
+        compatible = "mediatek,mt6360-led";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+            reg = <0>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_RED>;
+            led-max-microamp = <24000>;
+        };
+        led@1 {
+            reg = <1>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_GREEN>;
+            led-max-microamp = <24000>;
+        };
+        led@2 {
+            reg = <2>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_BLUE>;
+            led-max-microamp = <24000>;
+        };
+        led@3 {
+            reg = <3>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <150000>;
+        };
+        led@4 {
+            reg = <4>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <1>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1024000>;
+        };
+        led@5 {
+            reg = <5>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <2>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1024000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt
deleted file mode 100644
index f769c52e3643..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pca9532.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-*NXP - pca9532 PWM LED Driver
-
-The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
-The PWM support 256 steps.
-
-Required properties:
-	- compatible:
-		"nxp,pca9530"
-		"nxp,pca9531"
-		"nxp,pca9532"
-		"nxp,pca9533"
-	- reg -  I2C slave address
-
-Each led is represented as a sub-node of the nxp,pca9530.
-
-Optional sub-node properties:
-	- label: see Documentation/devicetree/bindings/leds/common.txt
-	- type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE)
-	- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
-	- default-state: see Documentation/devicetree/bindings/leds/common.txt
-	  This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>.
-
-Example:
-  #include <dt-bindings/leds/leds-pca9532.h>
-
-  leds: pca9530@60 {
-    compatible = "nxp,pca9530";
-    reg = <0x60>;
-
-    red-power {
-      label = "pca:red:power";
-      type = <PCA9532_TYPE_LED>;
-    };
-    green-power {
-      label = "pca:green:power";
-      type = <PCA9532_TYPE_LED>;
-    };
-    kernel-booting {
-      type = <PCA9532_TYPE_LED>;
-      default-state = "on";
-    };
-    sys-stat {
-      type = <PCA9532_TYPE_LED>;
-      default-state = "keep"; // don't touch, was set by U-Boot
-    };
-  };
-
-For more product information please see the link below:
-http://nxp.com/documents/data_sheet/PCA9532.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt b/Documentation/devicetree/bindings/leds/leds-pca955x.txt
deleted file mode 100644
index 817f460f3a72..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pca955x.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-* NXP - pca955x LED driver
-
-The PCA955x family of chips are I2C LED blinkers whose pins not used
-to control LEDs can be used as general purpose I/Os. The GPIO pins can
-be input or output, and output pins can also be pulse-width controlled.
-
-Required properties:
-- compatible : should be one of :
-	"nxp,pca9550"
-	"nxp,pca9551"
-	"nxp,pca9552"
-	"ibm,pca9552"
-	"nxp,pca9553"
-- #address-cells: must be 1
-- #size-cells: must be 0
-- reg: I2C slave address. depends on the model.
-
-Optional properties:
-- gpio-controller: allows pins to be used as GPIOs.
-- #gpio-cells: must be 2.
-- gpio-line-names: define the names of the GPIO lines
-
-LED sub-node properties:
-- reg : number of LED line.
-		from 0 to  1 for the pca9550
-		from 0 to  7 for the pca9551
-		from 0 to 15 for the pca9552
-		from 0 to  3 for the pca9553
-- type: (optional) either
-	PCA955X_TYPE_NONE
-	PCA955X_TYPE_LED
-	PCA955X_TYPE_GPIO
-	see dt-bindings/leds/leds-pca955x.h (default to LED)
-- label : (optional)
-	see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger : (optional)
-	see Documentation/devicetree/bindings/leds/common.txt
-
-Examples:
-
-pca9552: pca9552@60 {
-	compatible = "nxp,pca9552";
-	#address-cells = <1>;
-        #size-cells = <0>;
-	reg = <0x60>;
-
-	gpio-controller;
-	#gpio-cells = <2>;
-	gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15";
-
-	gpio@12 {
-		reg = <12>;
-		type = <PCA955X_TYPE_GPIO>;
-	};
-	gpio@13 {
-		reg = <13>;
-		type = <PCA955X_TYPE_GPIO>;
-	};
-	gpio@14 {
-		reg = <14>;
-		type = <PCA955X_TYPE_GPIO>;
-	};
-	gpio@15 {
-		reg = <15>;
-		type = <PCA955X_TYPE_GPIO>;
-	};
-
-	led@0 {
-		label = "red:power";
-		linux,default-trigger = "default-on";
-		reg = <0>;
-		type = <PCA955X_TYPE_LED>;
-	};
-	led@1 {
-		label = "green:power";
-		reg = <1>;
-		type = <PCA955X_TYPE_LED>;
-	};
-	led@2 {
-		label = "pca9552:yellow";
-		reg = <2>;
-		type = <PCA955X_TYPE_LED>;
-	};
-	led@3 {
-		label = "pca9552:white";
-		reg = <3>;
-		type = <PCA955X_TYPE_LED>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-pm8058.txt b/Documentation/devicetree/bindings/leds/leds-pm8058.txt
deleted file mode 100644
index 89584c49aab2..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pm8058.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Qualcomm PM8058 LED driver
-
-The Qualcomm PM8058 is a multi-functional device which contains
-an LED driver block for up to six LEDs: three normal LEDs, two
-"flash" LEDs and one "keypad backlight" LED. The names are
-quoted because sometimes these LED drivers are used for wildly
-different things than flash or keypad backlight: their names
-are more of a suggestion than a hard-wired usecase.
-
-Hardware-wise the different LEDs support slightly different
-output currents. The "flash" LEDs do not need to charge nor
-do they support external triggers. They are just powerful LED
-drivers.
-
-The LEDs appear as children to the PM8058 device, with the
-proper compatible string. For the PM8058 bindings see:
-mfd/qcom-pm8xxx.txt.
-
-Each LED is represented as a sub-node of the syscon device. Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-
-Required properties:
-- compatible: one of
-  "qcom,pm8058-led" (for the normal LEDs at 0x131, 0x132 and 0x133)
-  "qcom,pm8058-keypad-led" (for the "keypad" LED at 0x48)
-  "qcom,pm8058-flash-led" (for the "flash" LEDs at 0x49 and 0xFB)
-
-Optional properties:
-- label: see Documentation/devicetree/bindings/leds/common.txt
-- default-state: see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-qcom,ssbi@500000 {
-	pmicintc: pmic@0 {
-		compatible = "qcom,pm8058";
-		led@48 {
-			compatible = "qcom,pm8058-keypad-led";
-			reg = <0x48>;
-			label = "pm8050:white:keypad";
-			default-state = "off";
-		};
-		led@131 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x131>;
-			label = "pm8058:red";
-			default-state = "off";
-		};
-		led@132 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x132>;
-			label = "pm8058:yellow";
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-		led@133 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x133>;
-			label = "pm8058:green";
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
new file mode 100644
index 000000000000..a31a202afe5c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Multi-color LEDs connected to PWM
+
+maintainers:
+  - Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+
+description: |
+  This driver combines several monochrome PWM LEDs into one multi-color
+  LED using the multicolor LED class.
+
+properties:
+  compatible:
+    const: pwm-leds-multicolor
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      max-brightness:
+        description:
+          Maximum brightness possible for the LED
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    patternProperties:
+      "^led-[0-9a-z]+$":
+        type: object
+        $ref: common.yaml#
+
+        additionalProperties: false
+
+        properties:
+          pwms:
+            maxItems: 1
+
+          pwm-names: true
+
+          active-low: true
+
+          color: true
+
+        required:
+          - pwms
+          - color
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds-multicolor";
+
+        multi-led {
+            color = <LED_COLOR_ID_RGB>;
+            function = LED_FUNCTION_INDICATOR;
+            max-brightness = <65535>;
+
+            led-red {
+                pwms = <&pwm1 0 1000000>;
+                color = <LED_COLOR_ID_RED>;
+            };
+
+            led-green {
+                pwms = <&pwm2 0 1000000>;
+                color = <LED_COLOR_ID_GREEN>;
+            };
+
+            led-blue {
+                pwms = <&pwm3 0 1000000>;
+                color = <LED_COLOR_ID_BLUE>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
index fe4d5fd25913..6c4fcefbe25f 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -20,8 +20,8 @@ properties:
 patternProperties:
   "^led(-[0-9a-f]+)?$":
     type: object
-
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       pwms:
@@ -34,10 +34,18 @@ patternProperties:
           Maximum brightness possible for the LED
         $ref: /schemas/types.yaml#/definitions/uint32
 
-      active-low:
+      default-brightness:
         description:
-          For PWMs where the LED is wired to supply rather than ground.
-        type: boolean
+          Brightness to be set if LED's default state is on. Used only during
+          initialization. If the option is not set then max brightness is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      enable-gpios:
+        description:
+          GPIO for LED hardware enable control. Set active when brightness is
+          non-zero and inactive when brightness is zero.
+          The GPIO default state follows the "default-state" property.
+        maxItems: 1
 
     required:
       - pwms
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
new file mode 100644
index 000000000000..c4b7e57b2518
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -0,0 +1,307 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Light Pulse Generator
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: >
+  The Qualcomm Light Pulse Generator consists of three different hardware blocks;
+  a ramp generator with lookup table (LUT), the light pulse generator and a three
+  channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
+  The light pulse generator (LPG) can also be used independently to output PWM
+  signal for standard PWM applications. In this scenario, the LPG output should
+  be routed to a specific PMIC GPIO by setting the GPIO pin mux to the special
+  functions indicated in the datasheet, the TRILED driver for the channel will
+  not be enabled in this configuration.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pm660l-lpg
+          - qcom,pm8150b-lpg
+          - qcom,pm8150l-lpg
+          - qcom,pm8350c-pwm
+          - qcom,pm8916-pwm
+          - qcom,pm8941-lpg
+          - qcom,pm8994-lpg
+          - qcom,pmc8180c-lpg
+          - qcom,pmi632-lpg
+          - qcom,pmi8950-pwm
+          - qcom,pmi8994-lpg
+          - qcom,pmi8998-lpg
+          - qcom,pmk8550-pwm
+      - items:
+          - enum:
+              - qcom,pm6150l-lpg
+          - const: qcom,pm8150l-lpg
+      - items:
+          - enum:
+              - qcom,pm8550-pwm
+          - const: qcom,pm8350c-pwm
+      - items:
+          - enum:
+              - qcom,pm8937-pwm
+          - const: qcom,pm8916-pwm
+
+  "#pwm-cells":
+    const: 2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,power-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      power-source used to drive the output, as defined in the datasheet.
+      Should be specified if the TRILED block is present
+    enum: [0, 1, 3]
+
+  qcom,dtest:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: >
+      A list of integer pairs, where each pair represent the dtest line the
+      particular channel should be connected to and the flags denoting how the
+      value should be outputted, as defined in the datasheet. The number of
+      pairs should be the same as the number of channels.
+    items:
+      items:
+        - description: dtest line to attach
+        - description: flags for the attachment
+
+  nvmem:
+    description: >
+      This property is required for PMICs that supports PPG, which is when a
+      PMIC stores LPG per-channel data and pattern LUT in SDAM modules instead
+      of in a LUT peripheral. For PMICs, such as PM8350C, per-channel data
+      and pattern LUT is separated into 2 SDAM modules. In that case, phandles
+      to both SDAM modules need to be specified.
+    minItems: 1
+    maxItems: 2
+
+  nvmem-names:
+    minItems: 1
+    items:
+      - const: lpg_chan_sdam
+      - const: lut_sdam
+
+  qcom,pbs:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      Phandle of the Qualcomm Programmable Boot Sequencer node (PBS).
+      PBS node is used to trigger LPG pattern sequences for PMICs that support
+      single SDAM PPG.
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-9a-f]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+
+        required:
+          - reg
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm660l-lpg
+              - qcom,pm8150b-lpg
+              - qcom,pm8150l-lpg
+              - qcom,pm8916-pwm
+              - qcom,pm8941-lpg
+              - qcom,pm8994-lpg
+              - qcom,pmc8180c-lpg
+              - qcom,pmi8950-pwm
+              - qcom,pmi8994-lpg
+              - qcom,pmi8998-lpg
+              - qcom,pmk8550-pwm
+    then:
+      properties:
+        nvmem: false
+        nvmem-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmi632-lpg
+    then:
+      properties:
+        nvmem:
+          maxItems: 1
+        nvmem-names:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8350c-pwm
+    then:
+      properties:
+        nvmem:
+          minItems: 2
+        nvmem-names:
+          minItems: 2
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      qcom,dtest = <0 0>,
+                   <0 0>,
+                   <0 0>,
+                   <4 1>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <1>;
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <0>;
+        default-state = "on";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <2>;
+      };
+
+      led@4 {
+        reg = <4>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <3>;
+      };
+    };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      multi-led {
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_STATUS;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@1 {
+          reg = <1>;
+          color = <LED_COLOR_ID_RED>;
+        };
+
+        led@2 {
+          reg = <2>;
+          color = <LED_COLOR_ID_GREEN>;
+        };
+
+        led@3 {
+          reg = <3>;
+          color = <LED_COLOR_ID_BLUE>;
+        };
+      };
+    };
+  - |
+    pwm-controller {
+      compatible = "qcom,pm8916-pwm";
+      #pwm-cells = <2>;
+    };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi632-lpg";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      #pwm-cells = <2>;
+      nvmem-names = "lpg_chan_sdam";
+      nvmem = <&pmi632_sdam_7>;
+      qcom,pbs = <&pmi632_pbs_client3>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_RED>;
+        label = "red";
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        label = "green";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_BLUE>;
+        label = "blue";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
index 5b0c74aa6723..bfd0e240f7d6 100644
--- a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
@@ -27,6 +27,7 @@ properties:
   led:
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
@@ -38,7 +39,7 @@ examples:
   - |
     #include <dt-bindings/leds/common.h>
 
-    i2c0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
deleted file mode 100644
index df2b4e1c492b..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-LEDs connected to Spreadtrum SC27XX PMIC breathing light controller
-
-The SC27xx breathing light controller supports to 3 outputs:
-red LED, green LED and blue LED. Each LED can work at normal
-PWM mode or breath light mode.
-
-Required properties:
-- compatible: Should be "sprd,sc2731-bltc".
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- reg: Specify the controller address.
-
-Required child properties:
-- reg: Port this LED is connected to.
-
-Optional child properties:
-- function: See Documentation/devicetree/bindings/leds/common.txt.
-- color: See Documentation/devicetree/bindings/leds/common.txt.
-- label: See Documentation/devicetree/bindings/leds/common.txt (deprecated).
-
-Examples:
-
-led-controller@200 {
-	compatible = "sprd,sc2731-bltc";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x200>;
-
-	led@0 {
-		color = <LED_COLOR_ID_RED>;
-		reg = <0x0>;
-	};
-
-	led@1 {
-		color = <LED_COLOR_ID_GREEN>;
-		reg = <0x1>;
-	};
-
-	led@2 {
-		color = <LED_COLOR_ID_BLUE>;
-		reg = <0x2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
index f68259619488..37d2a93780ab 100644
--- a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
@@ -18,7 +18,10 @@ description: |
 
 properties:
   compatible:
-    const: sgmicro,sgm3140
+    enum:
+      - ocs,ocp8110
+      - richtek,rt5033-led
+      - sgmicro,sgm3140
 
   enable-gpios:
     maxItems: 1
@@ -34,6 +37,7 @@ properties:
   led:
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt b/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt
deleted file mode 100644
index 3bbbf7024411..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-LEDs connected to tlc59116 or tlc59108
-
-Required properties
-- compatible: should be "ti,tlc59116" or "ti,tlc59108"
-- #address-cells: must be 1
-- #size-cells: must be 0
-- reg: typically 0x68
-
-Each led is represented as a sub-node of the ti,tlc59116.
-See Documentation/devicetree/bindings/leds/common.txt
-
-LED sub-node properties:
-- reg: number of LED line, 0 to 15 or 0 to 7
-- label: (optional) name of LED
-- linux,default-trigger : (optional)
-
-Examples:
-
-tlc59116@68 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "ti,tlc59116";
-	reg = <0x68>;
-
-	wan@0 {
-		label = "wrt1900ac:amber:wan";
-		reg = <0x0>;
-	};
-
-	2g@2 {
-		label = "wrt1900ac:white:2g";
-		reg = <0x2>;
-	};
-
-	alive@9 {
-		label = "wrt1900ac:green:alive";
-		reg = <0x9>;
-		linux,default_trigger = "heartbeat";
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/maxim,max77693.yaml b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml
new file mode 100644
index 000000000000..e27f57bb52ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  There are two LED outputs available - FLED1 and FLED2. Each of them can
+  control a separate LED or they can be connected together to double the
+  maximum current for a single connected LED. One LED is represented by one
+  child node.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-led
+
+  maxim,boost-mode:
+    description:
+      In boost mode the device can produce up to 1.2A of total current on both
+      outputs. The maximum current on each output is reduced to 625mA then. If
+      not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in
+      case both current sources are used.
+      See LEDS_BOOST_* in include/dt-bindings/leds/common.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  maxim,boost-mvout:
+    description: |
+      Output voltage of the boost module in millivolts.
+      Valid values: 3300 - 5500, step by 25 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3300
+    maximum: 5500
+    default: 3300
+
+  maxim,mvsys-min:
+    description: |
+      Low input voltage level in millivolts. Flash is not fired if chip
+      estimates that system voltage could drop below this level due to flash
+      power consumption.
+      Valid values: 2400 - 3400, step by 33 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2400
+    maximum: 3400
+    default: 2400
+
+patternProperties:
+  "^([a-z]+-)?led[01]?$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-sources:
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              minimum: 0
+              maximum: 1
+
+      led-max-microamp:
+        description: |
+          Valid values for a LED connected to one FLED output:
+            15625 - 250000, step by 15625 (rounded down)
+          Valid values for a LED connected to both FLED outputs:
+            15625 - 500000, step by 15625 (rounded down)
+
+      flash-max-microamp:
+        description: |
+          Valid values for a single LED connected to one FLED output
+          (boost mode must be turned off):
+            15625 - 1000000, step by 15625 (rounded down)
+          Valid values for a single LED connected to both FLED outputs:
+            15625 - 1250000, step by 15625 (rounded down)
+          Valid values for two LEDs case:
+            15625 - 625000, step by 15625 (rounded down)
+
+      flash-max-timeout-us:
+        description: |
+          Valid values: 62500 - 1000000, step by 62500 (rounded down)
+        minimum: 62500
+        maximum: 1000000
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+      - led-sources
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
new file mode 100644
index 000000000000..e9d02ed6a590
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-flashlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Flash LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Alice Chen <alice_chen@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Add MT6370 flash LED driver include 2-channel flash LED support Torch/Strobe Mode.
+
+properties:
+  compatible:
+    const: mediatek,mt6370-flashlight
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-1]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1]
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
new file mode 100644
index 000000000000..16b3abc2af3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-indicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Alice Chen <alice_chen@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Add MT6370 LED driver include 4-channel RGB LED support Register/PWM/Breath Mode
+
+properties:
+  compatible:
+    const: mediatek,mt6370-indicator
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^multi-led@[0-3]$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            enum: [0, 1, 2]
+
+        required:
+          - reg
+          - color
+
+    required:
+      - reg
+      - color
+      - "#address-cells"
+      - "#size-cells"
+
+  "^led@[0-3]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+
+    required:
+      - reg
+      - color
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
new file mode 100644
index 000000000000..9610bca57dd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/nxp,pca953x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA9532 LED Dimmer
+
+maintainers:
+  - Riku Voipio <riku.voipio@iki.fi>
+
+description: |
+  The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
+  The PWM support 256 steps.
+
+  For more product information please see the link below:
+    https://www.nxp.com/docs/en/data-sheet/PCA9532.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9530
+      - nxp,pca9531
+      - nxp,pca9532
+      - nxp,pca9533
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 16
+
+  '#gpio-cells':
+    const: 2
+
+patternProperties:
+  "^led-[0-9a-z]+$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      type:
+        description: |
+          Output configuration, see include/dt-bindings/leds/leds-pca9532.h
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0
+        minimum: 0
+        maximum: 4
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/leds-pca9532.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@62 {
+            compatible = "nxp,pca9533";
+            reg = <0x62>;
+
+            led-1 {
+                label = "pca:red:power";
+                type = <PCA9532_TYPE_LED>;
+            };
+
+            led-2 {
+                label = "pca:green:power";
+                type = <PCA9532_TYPE_LED>;
+            };
+
+            led-3 {
+                type = <PCA9532_TYPE_LED>;
+                default-state = "on";
+            };
+
+            led-4 {
+                type = <PCA9532_TYPE_LED>;
+                default-state = "keep";
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
new file mode 100644
index 000000000000..ae7384cc760c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/nxp,pca955x.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/nxp,pca955x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA955X LED controllers
+
+maintainers:
+  - Nate Case <ncase@xes-inc.com>
+
+description: |
+  The PCA955x family of chips are I2C LED blinkers whose pins not used
+  to control LEDs can be used as general purpose I/Os. The GPIO pins can
+  be input or output, and output pins can also be pulse-width controlled.
+
+  For more product information please see the link below:
+  - https://www.nxp.com/docs/en/data-sheet/PCA9552.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9550
+      - nxp,pca9551
+      - nxp,pca9552
+      - ibm,pca9552
+      - nxp,pca9553
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 16
+
+  "#gpio-cells":
+    const: 2
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+      type:
+        description: |
+          Output configuration, see include/dt-bindings/leds/leds-pca955x.h
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0
+        minimum: 0
+        maximum: 2
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pca9550
+    then:
+      patternProperties:
+        "^led@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pca9551
+    then:
+      patternProperties:
+        "^led@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 7
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pca9552
+              - ibm,pca9552
+    then:
+      patternProperties:
+        "^led@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 15
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pca9553
+    then:
+      patternProperties:
+        "^led@[0-9a-f]$":
+          properties:
+            reg:
+              maximum: 3
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/leds-pca955x.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@60 {
+            compatible = "nxp,pca9552";
+            reg = <0x60>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0>;
+                label = "red:power";
+                linux,default-trigger = "default-on";
+                type = <PCA955X_TYPE_LED>;
+            };
+            led@1 {
+                reg = <1>;
+                label = "green:power";
+                type = <PCA955X_TYPE_LED>;
+            };
+            led@2 {
+                reg = <2>;
+                label = "pca9552:yellow";
+                type = <PCA955X_TYPE_LED>;
+            };
+            led@3 {
+                reg = <3>;
+                label = "pca9552:white";
+                type = <PCA955X_TYPE_LED>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml
new file mode 100644
index 000000000000..938d0e48fe51
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/nxp,pca963x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA963x LED controllers
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The NXP PCA963x are I2C-controlled LED drivers optimized for
+  Red/Green/Blue/Amber (RGBA) color mixing applications. Each LED is
+  individually controllable and has its own PWM controller.
+
+  Datasheets are available at
+
+  - https://www.nxp.com/docs/en/data-sheet/PCA9632.pdf
+  - https://www.nxp.com/docs/en/data-sheet/PCA9633.pdf
+  - https://www.nxp.com/docs/en/data-sheet/PCA9634.pdf
+  - https://www.nxp.com/docs/en/data-sheet/PCA9635.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9632
+      - nxp,pca9633
+      - nxp,pca9634
+      - nxp,pca9635
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  nxp,hw-blink:
+    type: boolean
+    description:
+      Use hardware blinking instead of software blinking
+
+  nxp,inverted-out:
+    type: boolean
+    description:
+      Invert the polarity of the generated PWM.
+
+  nxp,period-scale:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      In some configurations, the chip blinks faster than expected. This
+      parameter provides a scaling ratio (fixed point, decimal divided by 1000)
+      to compensate, e.g. 1300=1.3x and 750=0.75x.
+
+  nxp,totem-pole:
+    type: boolean
+    description:
+      Use totem pole (push-pull) instead of open-drain (pca9632 defaults to
+      open-drain, newer chips to totem pole).
+
+patternProperties:
+  "^led@[0-9a-f]+$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pca9632
+              - nxp,pca9633
+    then:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              maximum: 3
+    else:
+      patternProperties:
+        "^led@[0-9a-f]+$":
+          properties:
+            reg:
+              maximum: 7
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@62 {
+            compatible = "nxp,pca9632";
+            reg = <0x62>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_RED>;
+                    function = LED_FUNCTION_STATUS;
+            };
+
+            led@1 {
+                    reg = <1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                    function = LED_FUNCTION_STATUS;
+            };
+
+            led@2 {
+                    reg = <2>;
+                    color = <LED_COLOR_ID_BLUE>;
+                    function = LED_FUNCTION_STATUS;
+            };
+
+            led@3 {
+                    reg = <3>;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function = LED_FUNCTION_STATUS;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/nxp,pca995x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca995x.yaml
new file mode 100644
index 000000000000..ab8c90cbadb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/nxp,pca995x.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/nxp,pca995x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA995x LED controllers
+
+maintainers:
+  - Isai Gaspar <isaiezequiel.gaspar@nxp.com>
+  - Marek Vasut <marex@denx.de>
+
+description:
+  The NXP PCA995x family are programmable LED controllers connected via I2C
+  that can drive separate lines. Each of them can be individually switched
+  on and off, and brightness can be controlled via individual PWM.
+
+  Datasheets are available at
+  https://www.nxp.com/docs/en/data-sheet/PCA9952_PCA9955.pdf
+  https://www.nxp.com/docs/en/data-sheet/PCA9955B.pdf
+  https://www.nxp.com/docs/en/data-sheet/PCA9956B.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9952
+      - nxp,pca9955b
+      - nxp,pca9956b
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-9a-f]+$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 15
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@1 {
+            compatible = "nxp,pca9955b";
+            reg = <0x01>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0x0>;
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_POWER;
+            };
+
+            led@2 {
+                reg = <0x2>;
+                color = <LED_COLOR_ID_WHITE>;
+                function = LED_FUNCTION_STATUS;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml b/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml
new file mode 100644
index 000000000000..11d45c7f741d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/onnn,ncp5623.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor NCP5623 multi-LED Driver
+
+maintainers:
+  - Abdel Alkuor <alkuor@gmail.com>
+
+description:
+  NCP5623 Triple Output I2C Controlled LED Driver.
+  https://www.onsemi.com/pdf/datasheet/ncp5623-d.pdf
+
+properties:
+  compatible:
+    enum:
+      - onnn,ncp5623
+
+  reg:
+    enum:
+      - 0x38
+      - 0x39
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 2
+
+        required:
+          - reg
+          - color
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - multi-led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@38 {
+            compatible = "onnn,ncp5623";
+            reg = <0x38>;
+
+            multi-led {
+                color = <LED_COLOR_ID_RGB>;
+
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                    reg = <1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                    reg = <2>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/panasonic,an30259a.yaml b/Documentation/devicetree/bindings/leds/panasonic,an30259a.yaml
new file mode 100644
index 000000000000..e918dceea082
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/panasonic,an30259a.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/panasonic,an30259a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Panasonic AN30259A 3-channel LED controller
+
+maintainers:
+  - Iskren Chernev <me@iskren.info>
+
+description:
+  The AN30259A is a LED controller capable of driving three LEDs independently.
+  It supports constant current output and sloping current output modes. The chip
+  is connected over I2C.
+
+properties:
+  compatible:
+    const: panasonic,an30259a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[1-3]$":
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [ 1, 2, 3 ]
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@30 {
+            compatible = "panasonic,an30259a";
+            reg = <0x30>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@1 {
+                reg = <1>;
+                linux,default-trigger = "heartbeat";
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_RED>;
+            };
+
+            led@2 {
+                reg = <2>;
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_GREEN>;
+            };
+
+            led@3 {
+                reg = <3>;
+                function = LED_FUNCTION_INDICATOR;
+                color = <LED_COLOR_ID_BLUE>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt
deleted file mode 100644
index 4eee41482041..000000000000
--- a/Documentation/devicetree/bindings/leds/pca963x.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-LEDs connected to pca9632, pca9633 or pca9634
-
-Required properties:
-- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635"
-
-Optional properties:
-- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults
-  to open-drain, newer chips to totem pole)
-- nxp,hw-blink : use hardware blinking instead of software blinking
-- nxp,period-scale : In some configurations, the chip blinks faster than expected.
-		     This parameter provides a scaling ratio (fixed point, decimal divided
-		     by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x.
-- nxp,inverted-out: invert the polarity of the generated PWM
-
-Each led is represented as a sub-node of the nxp,pca963x device.
-
-LED sub-node properties:
-- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
-- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633,
-		0 to 7 in pca9634, or 0 to 15 in pca9635)
-- linux,default-trigger : (optional)
-   see Documentation/devicetree/bindings/leds/common.txt
-
-Examples:
-
-pca9632: pca9632 {
-	compatible = "nxp,pca9632";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x62>;
-
-	red@0 {
-		label = "red";
-		reg = <0>;
-		linux,default-trigger = "none";
-	};
-	green@1 {
-		label = "green";
-		reg = <1>;
-		linux,default-trigger = "none";
-	};
-	blue@2 {
-		label = "blue";
-		reg = <2>;
-		linux,default-trigger = "none";
-	};
-	unused@3 {
-		label = "unused";
-		reg = <3>;
-		linux,default-trigger = "none";
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml b/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml
new file mode 100644
index 000000000000..b409b2a8b5c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/qcom,pm8058-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8058 PMIC LED
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Qualcomm PM8058 contains an LED block for up to six LEDs:: three normal
+  LEDs, two "flash" LEDs and one "keypad backlight" LED. The names are quoted
+  because sometimes these LED drivers are used for wildly different things than
+  flash or keypad backlight:: their names are more of a suggestion than a
+  hard-wired usecase.
+
+  Hardware-wise the different LEDs support slightly different output currents.
+  The "flash" LEDs do not need to charge nor do they support external triggers.
+  They are just powerful LED drivers.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058-led
+      - qcom,pm8058-keypad-led
+      - qcom,pm8058-flash-led
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@131 {
+            compatible = "qcom,pm8058-led";
+            reg = <0x131>;
+            label = "pm8058:red";
+            color = <LED_COLOR_ID_RED>;
+            default-state = "off";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
new file mode 100644
index 000000000000..05250aefd385
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/qcom,spmi-flash-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Flash LED device inside Qualcomm Technologies, Inc. PMICs
+
+maintainers:
+  - Fenglin Wu <quic_fenglinw@quicinc.com>
+
+description: |
+  Flash LED controller is present inside some Qualcomm Technologies, Inc. PMICs.
+  The flash LED module can have different number of LED channels supported
+  e.g. 3 or 4. There are some different registers between them but they can
+  both support maximum current up to 1.5 A per channel and they can also support
+  ganging 2 channels together to supply maximum current up to 2 A. The current
+  will be split symmetrically on each channel and they will be enabled and
+  disabled at the same time.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pm6150l-flash-led
+          - qcom,pm660l-flash-led
+          - qcom,pm7550-flash-led
+          - qcom,pm8150c-flash-led
+          - qcom,pm8150l-flash-led
+          - qcom,pm8350c-flash-led
+          - qcom,pm8550-flash-led
+          - qcom,pmi8998-flash-led
+      - const: qcom,spmi-flash-led
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^led-[0-3]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+    description:
+      Represents the physical LED components which are connected to the
+      flash LED channels' output.
+
+    properties:
+      led-sources:
+        description:
+          The HW indices of the flash LED channels that connect to the
+          physical LED
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2, 3, 4]
+
+      led-max-microamp:
+        anyOf:
+          - minimum: 5000
+            maximum: 500000
+            multipleOf: 5000
+          - minimum: 10000
+            maximum: 1000000
+            multipleOf: 10000
+
+      flash-max-microamp:
+        anyOf:
+          - minimum: 12500
+            maximum: 1500000
+            multipleOf: 12500
+          - minimum: 25000
+            maximum: 2000000
+            multipleOf: 25000
+
+      flash-max-timeout-us:
+        minimum: 10000
+        maximum: 1280000
+        multipleOf: 10000
+
+    required:
+      - led-sources
+      - led-max-microamp
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@ee00 {
+            compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led";
+            reg = <0xee00>;
+
+            led-0 {
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_WHITE>;
+                led-sources = <1>, <4>;
+                led-max-microamp = <300000>;
+                flash-max-microamp = <2000000>;
+                flash-max-timeout-us = <1280000>;
+                function-enumerator = <0>;
+            };
+
+            led-1 {
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_YELLOW>;
+                led-sources = <2>, <3>;
+                led-max-microamp = <300000>;
+                flash-max-microamp = <2000000>;
+                flash-max-timeout-us = <1280000>;
+                function-enumerator = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.yaml b/Documentation/devicetree/bindings/leds/register-bit-led.yaml
index 79b8fc0f9d23..20930d327ae9 100644
--- a/Documentation/devicetree/bindings/leds/register-bit-led.yaml
+++ b/Documentation/devicetree/bindings/leds/register-bit-led.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/leds/register-bit-led.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device Tree Bindings for Register Bit LEDs
+title: Register Bit LEDs
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -60,7 +60,7 @@ examples:
   - |
 
     syscon@10000000 {
-        compatible = "arm,realview-pb1176-syscon", "syscon";
+        compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
         reg = <0x10000000 0x1000>;
         #address-cells = <1>;
         #size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/leds/regulator-led.yaml b/Documentation/devicetree/bindings/leds/regulator-led.yaml
new file mode 100644
index 000000000000..4ef7b96e9a08
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/regulator-led.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/regulator-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator LEDs
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Regulator LEDs are powered by a single regulator such that they can
+  be turned on or off by enabling or disabling the regulator. The available
+  brightness settings will be inferred from the available voltages on the
+  regulator, and any constraints on the voltage or current will need to be
+  specified on the regulator.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  $nodename:
+    pattern: '^led.*$'
+
+  compatible:
+    const: regulator-led
+
+  vled-supply:
+    description:
+      The regulator controlling the current to the LED.
+
+  function: true
+  color: true
+  linux,default-trigger: true
+  default-state: true
+
+required:
+  - compatible
+  - vled-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-heartbeat {
+        compatible = "regulator-led";
+        vled-supply = <&regulator>;
+        function = LED_FUNCTION_STATUS;
+        color = <LED_COLOR_ID_BLUE>;
+        linux,default-trigger = "heartbeat";
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
new file mode 100644
index 000000000000..44dd91aa239d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD2606MVV LED controller
+
+maintainers:
+  - Andreas Kemnade <andreas@kemnade.info>
+
+description:
+  The BD2606 MVV is a programmable LED controller connected via I2C that can
+  drive 6 separate lines. Each of them can be individually switched on and off,
+  but the brightness setting is shared between pairs of them.
+
+  Datasheet is available at
+  https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
+
+properties:
+  compatible:
+    const: rohm,bd2606mvv
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable/disable the device.
+
+patternProperties:
+  "^led@[0-5]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 5
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@66 {
+            compatible = "rohm,bd2606mvv";
+            reg = <0x66>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0x0>;
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_POWER;
+            };
+
+            led@2 {
+                reg = <0x2>;
+                color = <LED_COLOR_ID_WHITE>;
+                function = LED_FUNCTION_STATUS;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
index 86a37c92b834..b7a3ef76cbf4 100644
--- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ROHM BD71828 Power Management Integrated Circuit LED driver
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   This module is part of the ROHM BD71828 MFD device. For more details
@@ -18,34 +18,22 @@ description: |
 
   The device has two LED outputs referred as GRNLED and AMBLED in data-sheet.
 
-select: false
-
 properties:
   compatible:
     const: rohm,bd71828-leds
 
 patternProperties:
   "^led-[1-2]$":
-    type: object
-    description:
-      Properties for a single LED.
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
     properties:
-      #allOf:
-        #- $ref: "common.yaml#"
       rohm,led-compatible:
         description: LED identification string
-        $ref: "/schemas/types.yaml#/definitions/string"
+        $ref: /schemas/types.yaml#/definitions/string
         enum:
           - bd71828-ambled
           - bd71828-grnled
-      function:
-        description:
-          Purpose of LED as defined in dt-bindings/leds/common.h
-        $ref: "/schemas/types.yaml#/definitions/string"
-      color:
-        description:
-          LED colour as defined in dt-bindings/leds/common.h
-        $ref: "/schemas/types.yaml#/definitions/uint32"
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/leds/silergy,sy7802.yaml b/Documentation/devicetree/bindings/leds/silergy,sy7802.yaml
new file mode 100644
index 000000000000..46b8e5452b62
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/silergy,sy7802.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/silergy,sy7802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silergy SY7802 1800mA Boost Charge Pump LED Driver
+
+maintainers:
+  - André Apitzsch <git@apitzsch.eu>
+
+description: |
+  The SY7802 is a current-regulated charge pump which can regulate two current
+  levels for Flash and Torch modes.
+
+  The SY7802 is a high-current synchronous boost converter with 2-channel
+  high side current sources. Each channel is able to deliver 900mA current.
+
+properties:
+  compatible:
+    enum:
+      - silergy,sy7802
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+    description: A connection to the 'EN' pin.
+
+  flash-gpios:
+    maxItems: 1
+    description: A connection to the 'FLEN' pin.
+
+  vin-supply:
+    description: Regulator providing power to the 'VIN' pin.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-1]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: Index of the LED.
+        minimum: 0
+        maximum: 1
+
+      led-sources:
+        minItems: 1
+        maxItems: 2
+        items:
+          minimum: 0
+          maximum: 1
+
+    required:
+      - reg
+      - led-sources
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash-led-controller@53 {
+            compatible = "silergy,sy7802";
+            reg = <0x53>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+            led@0 {
+                reg = <0>;
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_WHITE>;
+                led-sources = <0>, <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
new file mode 100644
index 000000000000..a6aaa92dbccd
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The device is controlled through two pins:: FL_EN and EN_SET. The pins when,
+  asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+  respectively. In order to add a capability of selecting the strobe signal
+  source (e.g. CPU or camera sensor) there is an additional switch required,
+  independent of the flash chip. The switch is controlled with pin control.
+
+properties:
+  compatible:
+    const: skyworks,aat1290
+
+  enset-gpios:
+    maxItems: 1
+    description: EN_SET pin
+
+  flen-gpios:
+    maxItems: 1
+    description: FL_EN pin
+
+  led:
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-max-microamp: true
+
+      flash-max-microamp:
+        description: |
+          Maximum flash LED supply current can be calculated using following
+          formula:: I = 1A * 162 kOhm / Rset.
+
+      flash-max-timeout-us:
+        description: |
+          Maximum flash timeout can be calculated using following formula::
+            T = 8.82 * 10^9 * Ct.
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: host
+      - const: isp
+
+  pinctrl-0: true
+  pinctrl-1: true
+  pinctrl-2: true
+
+required:
+  - compatible
+  - enset-gpios
+  - flen-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    // Ct = 220 nF, Rset = 160 kOhm
+    led-controller {
+        compatible = "skyworks,aat1290";
+        flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+        enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+        pinctrl-names = "default", "host", "isp";
+        pinctrl-0 = <&camera_flash_host>;
+        pinctrl-1 = <&camera_flash_host>;
+        pinctrl-2 = <&camera_flash_isp>;
+
+        led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <520833>;
+            flash-max-microamp = <1012500>;
+            flash-max-timeout-us = <1940000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/sprd,sc2731-bltc.yaml b/Documentation/devicetree/bindings/leds/sprd,sc2731-bltc.yaml
new file mode 100644
index 000000000000..97535d6dc47a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/sprd,sc2731-bltc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/sprd,sc2731-bltc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC2731 PMIC breathing light controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  The SC2731 breathing light controller supports up to 3 outputs:
+  red LED, green LED and blue LED. Each LED can work at normal PWM mode
+  or breath light mode.
+
+properties:
+  compatible:
+    const: sprd,sc2731-bltc
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^led@[0-2]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 2
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/leds/st,led1202.yaml b/Documentation/devicetree/bindings/leds/st,led1202.yaml
new file mode 100644
index 000000000000..f1e5e4efaa3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/st,led1202.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/st,led1202.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST LED1202 LED controllers
+
+maintainers:
+  - Vicentiu Galanopulo <vicentiu.galanopulo@remote-tech.co.uk>
+
+description: |
+  The LED1202 is a 12-channel low quiescent current LED controller
+  programmable via I2C; The output current can be adjusted separately
+  for each channel by 8-bit analog and 12-bit digital dimming control.
+  Datasheet available at
+  https://www.st.com/en/power-management/led1202.html
+
+properties:
+  compatible:
+    const: st,led1202
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 11
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@58 {
+            compatible = "st,led1202";
+            reg = <0x58>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0x0>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_RED>;
+                function-enumerator = <1>;
+            };
+
+            led@1 {
+                reg = <0x1>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_GREEN>;
+                function-enumerator = <2>;
+            };
+
+            led@2 {
+                reg = <0x2>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_BLUE>;
+                function-enumerator = <3>;
+            };
+
+            led@3 {
+                reg = <0x3>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_RED>;
+                function-enumerator = <4>;
+            };
+
+            led@4 {
+                reg = <0x4>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_GREEN>;
+                function-enumerator = <5>;
+            };
+
+            led@5 {
+                reg = <0x5>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_BLUE>;
+                function-enumerator = <6>;
+            };
+
+            led@6 {
+                reg = <0x6>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_RED>;
+                function-enumerator = <7>;
+            };
+
+            led@7 {
+                reg = <0x7>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_GREEN>;
+                function-enumerator = <8>;
+            };
+
+            led@8 {
+                reg = <0x8>;
+                function = LED_FUNCTION_STATUS;
+                color = <LED_COLOR_ID_BLUE>;
+                function-enumerator = <9>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/ti,lp8860.yaml b/Documentation/devicetree/bindings/leds/ti,lp8860.yaml
new file mode 100644
index 000000000000..0ee357b02661
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti,lp8860.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,lp8860.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - lp8860 4-Channel LED Driver
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description: |
+  The LP8860-Q1 is an high-efficiency LED driver with boost controller.
+  It has 4 high-precision current sinks that can be controlled by a PWM input
+  signal, a SPI/I2C master, or both.
+
+  For more product information please see the link below:
+    https://www.ti.com/product/lp8860-q1
+
+properties:
+  compatible:
+    const: ti,lp8860
+
+  reg:
+    maxItems: 1
+    description: I2C slave address
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable (active high) / disable the device
+
+  vled-supply:
+    description: LED supply
+
+patternProperties:
+  "^led(@[0-3])?$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          Index of the LED.
+        maxItems: 1
+
+      function: true
+      color: true
+      label: true
+      linux,default-trigger: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@2d {
+            compatible = "ti,lp8860";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0x2d>;
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            vled-supply = <&vbatt>;
+
+            led@0 {
+                reg = <0>;
+                function = LED_FUNCTION_BACKLIGHT;
+                color = <LED_COLOR_ID_WHITE>;
+                linux,default-trigger = "backlight";
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
index 32c600387895..4b1575e4f180 100644
--- a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
+++ b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
@@ -38,8 +38,8 @@ properties:
 patternProperties:
   "^led@[0-6]$":
     type: object
-
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
@@ -87,7 +87,7 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/leds/common.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/leds/ti,tlc59116.yaml b/Documentation/devicetree/bindings/leds/ti,tlc59116.yaml
new file mode 100644
index 000000000000..ce9713793908
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti,tlc59116.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,tlc59116.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to tlc59116 or tlc59108
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+properties:
+  compatible:
+    enum:
+      - ti,tlc59108
+      - ti,tlc59116
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+    properties:
+      reg:
+        items:
+          minimum: 0
+          maximum: 15
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,tlc59108
+    then:
+      patternProperties:
+        "^led@[0-9a-f]$":
+          properties:
+            reg:
+              items:
+                maximum: 7
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@68 {
+            compatible = "ti,tlc59116";
+            reg = <0x68>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0x0>;
+                label = "wrt1900ac:amber:wan";
+            };
+
+            led@2 {
+                reg = <0x2>;
+                label = "wrt1900ac:white:2g";
+            };
+
+            led@9 {
+                reg = <0x9>;
+                label = "wrt1900ac:green:alive";
+                linux,default-trigger = "heartbeat";
+            };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/leds/ti,tps61310.yaml b/Documentation/devicetree/bindings/leds/ti,tps61310.yaml
new file mode 100644
index 000000000000..118f9c8bfdf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti,tps61310.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,tps61310.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TPS6131X flash LED driver
+
+maintainers:
+  - Matthias Fend <matthias.fend@emfend.at>
+
+description: |
+  The TPS61310/TPS61311 is a flash LED driver with I2C interface.
+  Its power stage is capable of supplying a maximum total current of roughly 1500mA.
+  The TPS6131x provides three constant-current sinks, capable of sinking
+  up to 2 x 400mA (LED1 and LED3) and 800mA (LED2) in flash mode.
+  In torch mode, each sink (LED1, LED2, LED3) supports currents up to 175mA.
+  Since the three current sinks share most of the control components such as
+  flash timer, control logic, safety timer and the operating mode, they cannot
+  be used completely independently of each other. Therefore, only one LED is
+  supported, but the current sinks can be combined accordingly.
+
+  The data sheet can be found at:
+    https://www.ti.com/lit/ds/symlink/tps61310.pdf
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,tps61311
+          - const: ti,tps61310
+      - items:
+          - const: ti,tps61310
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to NRESET pin
+
+  ti,valley-current-limit:
+    type: boolean
+    description:
+      Reduce the valley peak current limit from 1750mA to 1250mA (TPS61310) or
+      from 2480mA to 1800mA (TPS61311).
+
+  led:
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-sources:
+        minItems: 1
+        maxItems: 3
+        items:
+          enum: [1, 2, 3]
+
+      led-max-microamp:
+        oneOf:
+          - minimum: 50000
+            maximum: 350000
+            multipleOf: 50000
+          - minimum: 25000
+            maximum: 525000
+            multipleOf: 25000
+
+      flash-max-microamp:
+        oneOf:
+          - minimum: 50000
+            maximum: 800000
+            multipleOf: 50000
+          - minimum: 25000
+            maximum: 1500000
+            multipleOf: 25000
+
+      flash-max-timeout-us:
+        enum: [ 5300, 10700, 16000, 21300, 26600, 32000, 37300, 68200, 71500,
+                102200, 136300, 170400, 204500, 340800, 579300, 852000 ]
+
+    required:
+      - led-sources
+      - led-max-microamp
+      - flash-max-microamp
+      - flash-max-timeout-us
+
+required:
+  - compatible
+  - reg
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      led-controller@33 {
+        compatible = "ti,tps61311", "ti,tps61310";
+        reg = <0x33>;
+
+        reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+
+        led {
+          function = LED_FUNCTION_FLASH;
+          color = <LED_COLOR_ID_WHITE>;
+          led-sources = <1>, <2>, <3>;
+          led-max-microamp = <525000>;
+          flash-max-microamp = <1500000>;
+          flash-max-timeout-us = <852000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/leds/ti.lm36922.yaml b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
new file mode 100644
index 000000000000..8ffbc6b785a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti.lm36922.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti.lm36922.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - LM3692x Highly Efficient White LED Driver
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The LM3692x is an ultra-compact, highly efficient,
+  white-LED driver designed for LCD display backlighting.
+
+  The main difference between the LM36922 and LM36923 is the number of
+  LED strings it supports. The LM36922 supports two strings while the LM36923
+  supports three strings.
+
+  For more product information please see the link below:
+  https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lm36922
+      - ti,lm36923
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  enable-gpios:
+    description: gpio pin to enable/disable the device.
+
+  vled-supply:
+    description: LED supply
+
+  ti,ovp-microvolt:
+    description: Overvoltage protection.
+    default: 29000000
+    enum: [17000000, 21000000, 25000000, 29000000]
+
+patternProperties:
+  '^led@[0-3]$':
+    type: object
+    $ref: common.yaml
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+        description: |
+          0 - Will enable all LED sync paths
+          1 - Will enable the LED1 sync
+          2 - Will enable the LED2 sync
+          3 - Will enable the LED3 sync (LM36923 only)
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,lm36922
+    then:
+      properties:
+        led@3: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@36 {
+            compatible = "ti,lm36922";
+            reg = <0x36>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            vled-supply = <&vbatt>;
+            ti,ovp-microvolt = <29000000>;
+
+            led@0 {
+                reg = <0>;
+                function = LED_FUNCTION_BACKLIGHT;
+                color = <LED_COLOR_ID_WHITE>;
+                linux,default-trigger = "backlight";
+                led-max-microamp = <20000>;
+            };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/loongarch/cpus.yaml b/Documentation/devicetree/bindings/loongarch/cpus.yaml
new file mode 100644
index 000000000000..f175872995e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/loongarch/cpus.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/loongarch/cpus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LoongArch CPUs
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+description:
+  This document describes the list of LoongArch CPU cores that support FDT,
+  it describe the layout of CPUs in a system through the "cpus" node.
+
+allOf:
+  - $ref: /schemas/cpu.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,la264
+      - loongson,la364
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/loongson,ls2k-clk.h>
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            compatible = "loongson,la264";
+            device_type = "cpu";
+            reg = <0>;
+            clocks = <&clk LOONGSON2_NODE_CLK>;
+        };
+
+        cpu@1 {
+            compatible = "loongson,la264";
+            device_type = "cpu";
+            reg = <1>;
+            clocks = <&clk LOONGSON2_NODE_CLK>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/loongarch/loongson.yaml b/Documentation/devicetree/bindings/loongarch/loongson.yaml
new file mode 100644
index 000000000000..e1a4a97b7576
--- /dev/null
+++ b/Documentation/devicetree/bindings/loongarch/loongson.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/loongarch/loongson.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson SoC-based boards
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Loongson-2K0500 processor based boards
+        items:
+          - const: loongson,ls2k0500-ref
+          - const: loongson,ls2k0500
+
+      - description: Loongson-2K1000 processor based boards
+        items:
+          - const: loongson,ls2k1000-ref
+          - const: loongson,ls2k1000
+
+      - description: Loongson-2K2000 processor based boards
+        items:
+          - const: loongson,ls2k2000-ref
+          - const: loongson,ls2k2000
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml
index 75d5d97305e1..87d31963c1b7 100644
--- a/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml
@@ -68,13 +68,13 @@ examples:
     #include <dt-bindings/reset/sun8i-h3-ccu.h>
 
     msgbox: mailbox@1c17000 {
-            compatible = "allwinner,sun8i-h3-msgbox",
-                         "allwinner,sun6i-a31-msgbox";
-            reg = <0x01c17000 0x1000>;
-            clocks = <&ccu CLK_BUS_MSGBOX>;
-            resets = <&ccu RST_BUS_MSGBOX>;
-            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-            #mbox-cells = <1>;
+        compatible = "allwinner,sun8i-h3-msgbox",
+                     "allwinner,sun6i-a31-msgbox";
+        reg = <0x01c17000 0x1000>;
+        clocks = <&ccu CLK_BUS_MSGBOX>;
+        resets = <&ccu RST_BUS_MSGBOX>;
+        interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <1>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
index aa2b3bf56b57..79963c9878ba 100644
--- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mailbox/amlogic,meson-gxbb-mhu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mailbox/amlogic,meson-gxbb-mhu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson Message-Handling-Unit Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller
@@ -27,7 +27,7 @@ properties:
     maxItems: 1
 
   interrupts:
-    minItems: 3
+    maxItems: 3
     description:
       Contains the interrupt information corresponding to each of the 3 links
       of MHU.
@@ -46,9 +46,8 @@ additionalProperties: false
 examples:
   - |
     mailbox@c883c404 {
-          compatible = "amlogic,meson-gxbb-mhu";
-          reg = <0xc883c404 0x4c>;
-          interrupts = <208>, <209>, <210>;
-          #mbox-cells = <1>;
+        compatible = "amlogic,meson-gxbb-mhu";
+        reg = <0xc883c404 0x4c>;
+        interrupts = <208>, <209>, <210>;
+        #mbox-cells = <1>;
     };
-
diff --git a/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml b/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml
new file mode 100644
index 000000000000..815f08d61de8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/apm,xgene-slimpro-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SLIMpro mailbox
+
+maintainers:
+  - Khuong Dinh <khuong@os.amperecomputing.com>
+
+description:
+  The APM X-Gene SLIMpro mailbox is used to communicate messages between
+  the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple
+  interrupt based door bell mechanism and can exchange simple messages using the
+  internal registers.
+
+properties:
+  compatible:
+    const: apm,xgene-slimpro-mbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: mailbox channel 0 doorbell
+      - description: mailbox channel 1 doorbell
+      - description: mailbox channel 2 doorbell
+      - description: mailbox channel 3 doorbell
+      - description: mailbox channel 4 doorbell
+      - description: mailbox channel 5 doorbell
+      - description: mailbox channel 6 doorbell
+      - description: mailbox channel 7 doorbell
+
+  '#mbox-cells':
+    description: Number of mailbox channel.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@10540000 {
+        compatible = "apm,xgene-slimpro-mbox";
+        reg = <0x10540000 0xa000>;
+        #mbox-cells = <1>;
+        interrupts = <0x0 0x0 0x4>,
+                     <0x0 0x1 0x4>,
+                     <0x0 0x2 0x4>,
+                     <0x0 0x3 0x4>,
+                     <0x0 0x4 0x4>,
+                     <0x0 0x5 0x4>,
+                     <0x0 0x6 0x4>,
+                     <0x0 0x7 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
index 2c1704b34e7a..28985cc62c25 100644
--- a/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
@@ -27,14 +27,30 @@ properties:
           for example for the display controller, the system management
           controller and the NVMe coprocessor.
         items:
-          - const: apple,t8103-asc-mailbox
+          - enum:
+              - apple,t8103-asc-mailbox
+              - apple,t8112-asc-mailbox
+              - apple,t6000-asc-mailbox
+              - apple,t6020-asc-mailbox
+          - const: apple,asc-mailbox-v4
+
+      - description:
+          An older ASC mailbox interface found on T2 and A11 that is also
+          used for the NVMe coprocessor and the system management
+          controller.
+        items:
+          - const: apple,t8015-asc-mailbox
 
       - description:
           M3 mailboxes are an older variant with a slightly different MMIO
           interface still found on the M1. It is used for the Thunderbolt
           co-processors.
         items:
-          - const: apple,t8103-m3-mailbox
+          - enum:
+              - apple,t8103-m3-mailbox
+              - apple,t8112-m3-mailbox
+              - apple,t6000-m3-mailbox
+          - const: apple,m3-mailbox-v2
 
   reg:
     maxItems: 1
@@ -56,6 +72,9 @@ properties:
   "#mbox-cells":
     const: 0
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -67,11 +86,11 @@ additionalProperties: false
 
 examples:
   - |
-        mailbox@77408000 {
-                compatible = "apple,t8103-asc-mailbox";
-                reg = <0x77408000 0x4000>;
-                interrupts = <1 583 4>, <1 584 4>, <1 585 4>, <1 586 4>;
-                interrupt-names = "send-empty", "send-not-empty",
-                 "recv-empty", "recv-not-empty";
-                #mbox-cells = <0>;
-        };
+    mailbox@77408000 {
+        compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+        reg = <0x77408000 0x4000>;
+        interrupts = <1 583 4>, <1 584 4>, <1 585 4>, <1 586 4>;
+        interrupt-names = "send-empty", "send-not-empty",
+                          "recv-empty", "recv-not-empty";
+        #mbox-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
index bd49c201477d..e45b661e8b41 100644
--- a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
@@ -52,11 +52,11 @@ properties:
           - const: arm,mhu-doorbell
           - const: arm,primecell
 
-
   reg:
     maxItems: 1
 
   interrupts:
+    minItems: 2
     items:
       - description: low-priority non-secure
       - description: high-priority non-secure
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
index a4f1fe63659a..3828d77f6316 100644
--- a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
@@ -127,7 +127,6 @@ properties:
         - minimum: 0
           maximum: 124
 
-
   '#mbox-cells':
     description: |
       It is always set to 2. The first argument in the consumers 'mboxes'
@@ -197,7 +196,7 @@ examples:
             reg = <0 0x596e8000 0 0x88000>;
             clocks = <&adma_lpcg 0>, <&adma_lpcg 1>, <&adma_lpcg 2>;
             clock-names = "ipg", "ocram", "core";
-            power-domains = <&pd 0>, <&pd 1>, <&pd 2>, <&pd 3>;
+            power-domains = <&pd 0>, <&pd 1>;
             mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
             mboxes = <&mhu_tx 2 0>, //data-transfer protocol with 5 windows, mhu-tx
                      <&mhu_tx 3 0>, //data-transfer protocol with 7 windows, mhu-tx
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml
new file mode 100644
index 000000000000..449b55afeb7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv3.yaml
@@ -0,0 +1,224 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/arm,mhuv3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MHUv3 Mailbox Controller
+
+maintainers:
+  - Sudeep Holla <sudeep.holla@arm.com>
+  - Cristian Marussi <cristian.marussi@arm.com>
+
+description: |
+  The Arm Message Handling Unit (MHU) Version 3 is a mailbox controller that
+  enables unidirectional communications with remote processors through various
+  possible transport protocols.
+  The controller can optionally support a varying number of extensions that, in
+  turn, enable different kinds of transport to be used for communication.
+  Number, type and characteristics of each supported extension can be discovered
+  dynamically at runtime.
+
+  Given the unidirectional nature of the controller, an MHUv3 mailbox controller
+  is composed of a MHU Sender (MHUS) containing a PostBox (PBX) block and a MHU
+  Receiver (MHUR) containing a MailBox (MBX) block, where
+
+   PBX is used to
+      - Configure the MHU
+      - Send Transfers to the Receiver
+      - Optionally receive acknowledgment of a Transfer from the Receiver
+
+   MBX is used to
+      - Configure the MHU
+      - Receive Transfers from the Sender
+      - Optionally acknowledge Transfers sent by the Sender
+
+  Both PBX and MBX need to be present and defined in the DT description if you
+  need to establish a bidirectional communication, since you will have to
+  acquire two distinct unidirectional channels, one for each block.
+
+  As a consequence both blocks needs to be represented separately and specified
+  as distinct DT nodes in order to properly describe their resources.
+
+  Note that, though, thanks to the runtime discoverability, there is no need to
+  identify the type of blocks with distinct compatibles.
+
+  Following are the MHUv3 possible extensions.
+
+  - Doorbell Extension (DBE): DBE defines a type of channel called a Doorbell
+    Channel (DBCH). DBCH enables a single bit Transfer to be sent from the
+    Sender to Receiver. The Transfer indicates that an event has occurred.
+    When DBE is implemented, the number of DBCHs that an implementation of the
+    MHU can support is between 1 and 128, numbered starting from 0 in ascending
+    order and discoverable at run-time.
+    Each DBCH contains 32 individual fields, referred to as flags, each of which
+    can be used independently. It is possible for the Sender to send multiple
+    Transfers at once using a single DBCH, so long as each Transfer uses
+    a different flag in the DBCH.
+    Optionally, data may be transmitted through an out-of-band shared memory
+    region, wherein the MHU Doorbell is used strictly as an interrupt generation
+    mechanism, but this is out of the scope of these bindings.
+
+  - FastChannel Extension (FCE): FCE defines a type of channel called a Fast
+    Channel (FCH). FCH is intended for lower overhead communication between
+    Sender and Receiver at the expense of determinism. An FCH allows the Sender
+    to update the channel value at any time, regardless of whether the previous
+    value has been seen by the Receiver. When the Receiver reads the channel's
+    content it gets the last value written to the channel.
+    FCH is considered lossy in nature, and means that the Sender has no way of
+    knowing if, or when, the Receiver will act on the Transfer.
+    FCHs are expected to behave as RAM which generates interrupts when writes
+    occur to the locations within the RAM.
+    When FCE is implemented, the number of FCHs that an implementation of the
+    MHU can support is between 1-1024, if the FastChannel word-size is 32-bits,
+    or between 1-512, when the FastChannel word-size is 64-bits.
+    FCHs are numbered from 0 in ascending order.
+    Note that the number of FCHs and the word-size are implementation defined,
+    not configurable but discoverable at run-time.
+    Optionally, data may be transmitted through an out-of-band shared memory
+    region, wherein the MHU FastChannel is used as an interrupt generation
+    mechanism which carries also a pointer to such out-of-band data, but this
+    is out of the scope of these bindings.
+
+  - FIFO Extension (FE): FE defines a Channel type called a FIFO Channel (FFCH).
+    FFCH allows a Sender to send
+       - Multiple Transfers to the Receiver without having to wait for the
+         previous Transfer to be acknowledged by the Receiver, as long as the
+         FIFO has room for the Transfer.
+       - Transfers which require the Receiver to provide acknowledgment.
+       - Transfers which have in-band payload.
+    In all cases, the data is guaranteed to be observed by the Receiver in the
+    same order which the Sender sent it.
+    When FE is implemented, the number of FFCHs that an implementation of the
+    MHU can support is between 1 and 64, numbered starting from 0 in ascending
+    order. The number of FFCHs, their depth (same for all implemented FFCHs) and
+    the access-granularity are implementation defined, not configurable but
+    discoverable at run-time.
+    Optionally, additional data may be transmitted through an out-of-band shared
+    memory region, wherein the MHU FIFO is used to transmit, in order, a small
+    part of the payload (like a header) and a reference to the shared memory
+    area holding the remaining, bigger, chunk of the payload, but this is out of
+    the scope of these bindings.
+
+properties:
+  compatible:
+    const: arm,mhuv3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 74
+
+  interrupt-names:
+    description: |
+      The MHUv3 controller generates a number of events some of which are used
+      to generate interrupts; as a consequence it can expose a varying number of
+      optional PBX/MBX interrupts, representing the events generated during the
+      operation of the various transport protocols associated with different
+      extensions. All interrupts of the MHU are level-sensitive.
+      Some of these optional interrupts are defined per-channel, where the
+      number of channels effectively available is implementation defined and
+      run-time discoverable.
+      In the following names are enumerated using patterns, with per-channel
+      interrupts implicitly capped at the maximum channels allowed by the
+      specification for each extension type.
+      For the sake of simplicity maxItems is anyway capped to a most plausible
+      number, assuming way less channels would be implemented than actually
+      possible.
+
+      The only mandatory interrupts on the MHU are:
+        - combined
+        - mbx-fch-xfer-<N> but only if mbx-fcgrp-xfer-<N> is not implemented.
+
+    minItems: 1
+    maxItems: 74
+    items:
+      oneOf:
+        - const: combined
+          description: PBX/MBX Combined interrupt
+        - const: combined-ffch
+          description: PBX/MBX FIFO Combined interrupt
+        - pattern: '^ffch-low-tide-[0-9]+$'
+          description: PBX/MBX FIFO Channel <N> Low Tide interrupt
+        - pattern: '^ffch-high-tide-[0-9]+$'
+          description: PBX/MBX FIFO Channel <N> High Tide interrupt
+        - pattern: '^ffch-flush-[0-9]+$'
+          description: PBX/MBX FIFO Channel <N> Flush interrupt
+        - pattern: '^mbx-dbch-xfer-[0-9]+$'
+          description: MBX Doorbell Channel <N> Transfer interrupt
+        - pattern: '^mbx-fch-xfer-[0-9]+$'
+          description: MBX FastChannel <N> Transfer interrupt
+        - pattern: '^mbx-fchgrp-xfer-[0-9]+$'
+          description: MBX FastChannel <N> Group Transfer interrupt
+        - pattern: '^mbx-ffch-xfer-[0-9]+$'
+          description: MBX FIFO Channel <N> Transfer interrupt
+        - pattern: '^pbx-dbch-xfer-ack-[0-9]+$'
+          description: PBX Doorbell Channel <N> Transfer Ack interrupt
+        - pattern: '^pbx-ffch-xfer-ack-[0-9]+$'
+          description: PBX FIFO Channel <N> Transfer Ack interrupt
+
+  '#mbox-cells':
+    description: |
+      The first argument in the consumers 'mboxes' property represents the
+      extension type, the second is for the channel number while the third
+      depends on extension type.
+
+      Extension types constants are defined in <dt-bindings/arm/mhuv3-dt.h>.
+
+      Extension type for DBE is DBE_EXT and the third parameter represents the
+      doorbell flag number to use.
+      Extension type for FCE is FCE_EXT, third parameter unused.
+      Extension type for FE is FE_EXT, third parameter unused.
+
+      mboxes = <&mhu DBE_EXT 0 5>; // DBE, Doorbell Channel Window 0, doorbell 5.
+      mboxes = <&mhu DBE_EXT 7>; // DBE, Doorbell Channel Window 1, doorbell 7.
+      mboxes = <&mhu FCE_EXT 0 0>; // FCE, FastChannel Window 0.
+      mboxes = <&mhu FCE_EXT 3 0>; // FCE, FastChannel Window 3.
+      mboxes = <&mhu FE_EXT 1 0>; // FE, FIFO Channel Window 1.
+      mboxes = <&mhu FE_EXT 7 0>; // FE, FIFO Channel Window 7.
+    const: 3
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mailbox@2aaa0000 {
+            compatible = "arm,mhuv3";
+            #mbox-cells = <3>;
+            reg = <0 0x2aaa0000 0 0x10000>;
+            clocks = <&clock 0>;
+            interrupt-names = "combined", "pbx-dbch-xfer-ack-1",
+                               "ffch-high-tide-0";
+            interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        mailbox@2ab00000 {
+            compatible = "arm,mhuv3";
+            #mbox-cells = <3>;
+            reg = <0 0x2aab0000 0 0x10000>;
+            clocks = <&clock 0>;
+            interrupt-names = "combined", "mbx-dbch-xfer-1", "ffch-low-tide-0";
+            interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/aspeed,ast2700-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/aspeed,ast2700-mailbox.yaml
new file mode 100644
index 000000000000..600e2d63fccd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/aspeed,ast2700-mailbox.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/aspeed,ast2700-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2700 mailbox controller
+
+maintainers:
+  - Jammy Huang <jammy_huang@aspeedtech.com>
+
+description: >
+  ASPEED AST2700 has multiple processors that need to communicate with each
+  other. The mailbox controller provides a way for these processors to send
+  messages to each other. It is a hardware-based inter-processor communication
+  mechanism that allows processors to send and receive messages through
+  dedicated channels.
+
+  The mailbox's tx/rx are independent, meaning that one processor can send a
+  message while another processor is receiving a message simultaneously.
+  There are 4 channels available for both tx and rx operations. Each channel
+  has a FIFO buffer that can hold messages of a fixed size (32 bytes in this
+  case).
+
+  The mailbox controller also supports interrupt generation, allowing
+  processors to notify each other when a message is available or when an event
+  occurs.
+
+properties:
+  compatible:
+    const: aspeed,ast2700-mailbox
+
+  reg:
+    items:
+      - description: TX control register
+      - description: RX control register
+
+  reg-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@12c1c200 {
+        compatible = "aspeed,ast2700-mailbox";
+        reg = <0x12c1c200 0x100>, <0x12c1c300 0x100>;
+        reg-names = "tx", "rx";
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
deleted file mode 100644
index b48d7d30012c..000000000000
--- a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Broadcom BCM2835 VideoCore mailbox IPC
-
-Required properties:
-
-- compatible:	Should be "brcm,bcm2835-mbox"
-- reg:		Specifies base physical address and size of the registers
-- interrupts:	The interrupt number
-		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
-- #mbox-cells:	Specifies the number of cells needed to encode a mailbox
-		  channel. The value shall be 0, since there is only one
-		  mailbox channel implemented by the device.
-
-Example:
-
-mailbox: mailbox@7e00b880 {
-	compatible = "brcm,bcm2835-mbox";
-	reg = <0x7e00b880 0x40>;
-	interrupts = <0 1>;
-	#mbox-cells = <0>;
-};
-
-firmware: firmware {
-	compatible = "raspberrypi,firmware";
-	mboxes = <&mailbox>;
-	#power-domain-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml
new file mode 100644
index 000000000000..9588817f4511
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/brcm,bcm2835-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 VideoCore mailbox IPC
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@i2se.com>
+
+properties:
+  compatible:
+    const: brcm,bcm2835-mbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@7e00b880 {
+      compatible = "brcm,bcm2835-mbox";
+      reg = <0x7e00b880 0x40>;
+      interrupts = <0 1>;
+      #mbox-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm74110-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,bcm74110-mbox.yaml
new file mode 100644
index 000000000000..750cc96edb46
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm74110-mbox.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/brcm,bcm74110-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM74110 Mailbox
+
+maintainers:
+  - Justin Chen <justin.chen@broadcom.com>
+  - Florian Fainelli <florian.fainelli@broadcom.com>
+
+description: Broadcom mailbox hardware first introduced with 74110
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm74110-mbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: RX doorbell and watermark interrupts
+      - description: TX doorbell and watermark interrupts
+
+  "#mbox-cells":
+    const: 2
+    description:
+      The first cell is channel type and second cell is shared memory slot
+
+  brcm,rx:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: RX Mailbox number
+
+  brcm,tx:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TX Mailbox number
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+  - brcm,rx
+  - brcm,tx
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@a552000 {
+        compatible = "brcm,bcm74110-mbox";
+        reg = <0xa552000 0x1104>;
+        interrupts = <GIC_SPI 0x67 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 0x66 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <0x2>;
+        brcm,rx = <0x7>;
+        brcm,tx = <0x6>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
deleted file mode 100644
index 752ae6b00d26..000000000000
--- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Broadcom FlexRM Ring Manager
-============================
-The Broadcom FlexRM ring manager provides a set of rings which can be
-used to submit work to offload engines. An SoC may have multiple FlexRM
-hardware blocks. There is one device tree entry per FlexRM block. The
-FlexRM driver will create a mailbox-controller instance for given FlexRM
-hardware block where each mailbox channel is a separate FlexRM ring.
-
-Required properties:
---------------------
-- compatible:	Should be "brcm,iproc-flexrm-mbox"
-- reg:		Specifies base physical address and size of the FlexRM
-		ring registers
-- msi-parent:	Phandles (and potential Device IDs) to MSI controllers
-		The FlexRM engine will send MSIs (instead of wired
-		interrupts) to CPU. There is one MSI for each FlexRM ring.
-		Refer devicetree/bindings/interrupt-controller/msi.txt
-- #mbox-cells:	Specifies the number of cells needed to encode a mailbox
-		channel. This should be 3.
-
-		The 1st cell is the mailbox channel number.
-
-		The 2nd cell contains MSI completion threshold. This is the
-		number of completion messages for which FlexRM will inject
-		one MSI interrupt to CPU.
-
-		The 3nd cell contains MSI timer value representing time for
-		which FlexRM will wait to accumulate N completion messages
-		where N is the value specified by 2nd cell above. If FlexRM
-		does not get required number of completion messages in time
-		specified by this cell then it will inject one MSI interrupt
-		to CPU provided atleast one completion message is available.
-
-Optional properties:
---------------------
-- dma-coherent:	Present if DMA operations made by the FlexRM engine (such
-		as DMA descriptor access, access to buffers pointed by DMA
-		descriptors and read/write pointer updates to DDR) are
-		cache coherent with the CPU.
-
-Example:
---------
-crypto_mbox: mbox@67000000 {
-	compatible = "brcm,iproc-flexrm-mbox";
-	reg = <0x67000000 0x200000>;
-	msi-parent = <&gic_its 0x7f00>;
-	#mbox-cells = <3>;
-};
-
-crypto@672c0000 {
-	compatible = "brcm,spu2-v2-crypto";
-	reg = <0x672c0000 0x1000>;
-	mboxes = <&crypto_mbox 0 0x1 0xffff>,
-		 <&crypto_mbox 1 0x1 0xffff>,
-		 <&crypto_mbox 16 0x1 0xffff>,
-		 <&crypto_mbox 17 0x1 0xffff>,
-		 <&crypto_mbox 30 0x1 0xffff>,
-		 <&crypto_mbox 31 0x1 0xffff>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml
new file mode 100644
index 000000000000..c801bd2e95f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/brcm,iproc-flexrm-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom FlexRM Ring Manager
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+description:
+  The Broadcom FlexRM ring manager provides a set of rings which can be used to
+  submit work to offload engines. An SoC may have multiple FlexRM hardware
+  blocks. There is one device tree entry per FlexRM block. The FlexRM driver
+  will create a mailbox-controller instance for given FlexRM hardware block
+  where each mailbox channel is a separate FlexRM ring.
+
+properties:
+  compatible:
+    const: brcm,iproc-flexrm-mbox
+
+  reg:
+    maxItems: 1
+
+  msi-parent:
+    maxItems: 1
+
+  '#mbox-cells':
+    description: >
+      The 1st cell is the mailbox channel number.
+
+      The 2nd cell contains MSI completion threshold. This is the number of
+      completion messages for which FlexRM will inject one MSI interrupt to CPU.
+
+      The 3rd cell contains MSI timer value representing time for which FlexRM
+      will wait to accumulate N completion messages where N is the value
+      specified by 2nd cell above. If FlexRM does not get required number of
+      completion messages in time specified by this cell then it will inject one
+      MSI interrupt to CPU provided at least one completion message is
+      available.
+    const: 3
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+  - msi-parent
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox@67000000 {
+        compatible = "brcm,iproc-flexrm-mbox";
+        reg = <0x67000000 0x200000>;
+        msi-parent = <&gic_its 0x7f00>;
+        #mbox-cells = <3>;
+        dma-coherent;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt
deleted file mode 100644
index 9bcdf2087625..000000000000
--- a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-The PDC driver manages data transfer to and from various offload engines
-on some Broadcom SoCs. An SoC may have multiple PDC hardware blocks. There is
-one device tree entry per block.  On some chips, the PDC functionality is
-handled by the FA2 (Northstar Plus).
-
-Required properties:
-- compatible : Should be "brcm,iproc-pdc-mbox" or "brcm,iproc-fa2-mbox" for
-  FA2/Northstar Plus.
-- reg: Should contain PDC registers location and length.
-- interrupts: Should contain the IRQ line for the PDC.
-- #mbox-cells: 1
-- brcm,rx-status-len: Length of metadata preceding received frames, in bytes.
-
-Optional properties:
-- brcm,use-bcm-hdr:  present if a BCM header precedes each frame.
-
-Example:
-	pdc0: iproc-pdc0@612c0000 {
-		compatible = "brcm,iproc-pdc-mbox";
-		reg = <0 0x612c0000 0 0x445>;  /* PDC FS0 regs */
-		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-		#mbox-cells = <1>;   /* one cell per mailbox channel */
-		brcm,rx-status-len = <32>;
-		brcm,use-bcm-hdr;
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.yaml b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.yaml
new file mode 100644
index 000000000000..5534ae07c9fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/brcm,iproc-pdc-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PDC mailbox
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+description:
+  The PDC driver manages data transfer to and from various offload engines on
+  some Broadcom SoCs. An SoC may have multiple PDC hardware blocks. There is one
+  device tree entry per block. On some chips, the PDC functionality is handled
+  by the FA2 (Northstar Plus).
+
+properties:
+  compatible:
+    enum:
+      - brcm,iproc-pdc-mbox
+      - brcm,iproc-fa2-mbox
+
+  reg:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  '#mbox-cells':
+    const: 1
+
+  brcm,rx-status-len:
+    description:
+      Length of metadata preceding received frames, in bytes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  brcm,use-bcm-hdr:
+    type: boolean
+    description:
+      Present if a BCM header precedes each frame.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#mbox-cells'
+  - brcm,rx-status-len
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox0@612c0000 {
+        compatible = "brcm,iproc-pdc-mbox";
+        reg = <0x612c0000 0x445>;
+        interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <1>;
+        brcm,rx-status-len = <32>;
+        brcm,use-bcm-hdr;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml b/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml
new file mode 100644
index 000000000000..66d75b7bc8c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/cix,sky1-mbox.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/cix,sky1-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cixtech mailbox controller
+
+maintainers:
+  - Guomin Chen <Guomin.Chen@cixtech.com>
+
+description:
+  The Cixtech mailbox controller, used in the Cixtech Sky1 SoC,
+  is used for message transmission between multiple processors
+  within the SoC, such as the AP, PM, audio DSP, SensorHub MCU,
+  and others
+
+  Each Cixtech mailbox controller is unidirectional, so they are
+  typically used in pairs-one for receiving and one for transmitting.
+
+  Each Cixtech mailbox supports 11 channels with different transmission modes
+    channel 0-7 - Fast channel with 32bit transmit register and IRQ support
+    channel 8   - Doorbell mode,using the mailbox as an interrupt-generating
+                   mechanism.
+    channel 9   - Fifo based channel with 32*32bit depth fifo and IRQ support
+    channel 10  - Reg based channel with 32*32bit transmit register and
+                   Doorbell+transmit acknowledgment IRQ support
+
+  In the CIX Sky1 SoC use case, there are 4 pairs of mailbox controllers
+    AP <--> PM - using Doorbell transfer mode
+    AP <--> SE - using REG transfer mode
+    AP <--> DSP - using FIFO transfer mode
+    AP <--> SensorHub - using FIFO transfer mode
+
+properties:
+  compatible:
+    const: cix,sky1-mbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 1
+
+  cix,mbox-dir:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Direction of the mailbox relative to the AP
+    enum: [tx, rx]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+  - cix,mbox-dir
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mbox_ap2pm: mailbox@30000000 {
+            compatible = "cix,sky1-mbox";
+            reg = <0 0x30000000 0 0x10000>;
+            interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH 0>;
+            #mbox-cells = <1>;
+            cix,mbox-dir = "tx";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
index a337bcd80c4a..581425aacdcc 100644
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
@@ -28,7 +28,15 @@ properties:
       - const: fsl,imx7ulp-mu
       - const: fsl,imx8ulp-mu
       - const: fsl,imx8-mu-scu
+      - const: fsl,imx8-mu-seco
       - const: fsl,imx8ulp-mu-s4
+      - const: fsl,imx93-mu-s4
+      - const: fsl,imx95-mu
+      - const: fsl,imx95-mu-ele
+      - const: fsl,imx95-mu-v2x
+      - items:
+          - const: fsl,imx93-mu
+          - const: fsl,imx8ulp-mu
       - items:
           - enum:
               - fsl,imx7s-mu
@@ -46,12 +54,23 @@ properties:
               - fsl,imx8qm-mu
               - fsl,imx8qxp-mu
           - const: fsl,imx6sx-mu
+      - items:
+          - enum:
+              - fsl,imx94-mu
+          - const: fsl,imx95-mu
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: tx
+      - const: rx
 
   "#mbox-cells":
     description: |
@@ -60,14 +79,17 @@ properties:
       type      : Channel type
       channel   : Channel number
 
-      This MU support 4 type of unidirectional channels, each type
-      has 4 channels. A total of 16 channels. Following types are
+      This MU support 6 type of unidirectional channels, each type
+      has 4 channels except RST channel which only has 1 channel.
+      A total of 21 channels.  Following types are
       supported:
       0 - TX channel with 32bit transmit register and IRQ transmit
           acknowledgment support.
       1 - RX channel with 32bit receive register and IRQ support
       2 - TX doorbell channel. Without own register and no ACK support.
       3 - RX doorbell channel.
+      4 - RST channel
+      5 - Tx doorbell channel. With S/W ACK from the other side.
     const: 2
 
   clocks:
@@ -80,12 +102,56 @@ properties:
   power-domains:
     maxItems: 1
 
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^sram@[a-f0-9]+":
+    $ref: /schemas/sram/sram.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
   - interrupts
   - "#mbox-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx93-mu-s4
+    then:
+      properties:
+        interrupt-names:
+          minItems: 2
+        interrupts:
+          minItems: 2
+
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+      not:
+        required:
+          - interrupt-names
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: fsl,imx95-mu
+    then:
+      patternProperties:
+        "^sram@[a-f0-9]+": false
+
 additionalProperties: false
 
 examples:
@@ -98,3 +164,34 @@ examples:
         interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
         #mbox-cells = <2>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@445b0000 {
+        compatible = "fsl,imx95-mu";
+        reg = <0x445b0000 0x10000>;
+        ranges;
+        interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #mbox-cells = <2>;
+
+        sram@445b1000 {
+            compatible = "mmio-sram";
+            reg = <0x445b1000 0x400>;
+            ranges = <0x0 0x445b1000 0x400>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            scmi-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
+
+            scmi-sram-section@80 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x80 0x80>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/google,gs101-mbox.yaml b/Documentation/devicetree/bindings/mailbox/google,gs101-mbox.yaml
new file mode 100644
index 000000000000..e249db4c1fbc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/google,gs101-mbox.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2024 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/google,gs101-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Mailbox Controller
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+description:
+  The Samsung Exynos mailbox controller, used on Google GS101 SoC, has 16 flag
+  bits for hardware interrupt generation and a shared register for passing
+  mailbox messages. When the controller is used by the ACPM interface
+  the shared register is ignored and the mailbox controller acts as a doorbell.
+  The controller just raises the interrupt to the firmware after the
+  ACPM interface has written the message to SRAM.
+
+properties:
+  compatible:
+    const: google,gs101-mbox
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pclk
+
+  interrupts:
+    description: IRQ line for the RX mailbox.
+    maxItems: 1
+
+  '#mbox-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/google,gs101.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ap2apm_mailbox: mailbox@17610000 {
+            compatible = "google,gs101-mbox";
+            reg = <0x17610000 0x1000>;
+            clocks = <&cmu_apm CLK_GOUT_APM_MAILBOX_APM_AP_PCLK>;
+            clock-names = "pclk";
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH 0>;
+            #mbox-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt
deleted file mode 100644
index 282ab81a4ea6..000000000000
--- a/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* rWTM BIU Mailbox driver for Armada 37xx
-
-Required properties:
-- compatible:	must be "marvell,armada-3700-rwtm-mailbox"
-- reg:		physical base address of the mailbox and length of memory mapped
-		region
-- interrupts:	the IRQ line for the mailbox
-- #mbox-cells:	must be 1
-
-Example:
-	rwtm: mailbox@b0000 {
-		compatible = "marvell,armada-3700-rwtm-mailbox";
-		reg = <0xb0000 0x100>;
-		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-		#mbox-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.yaml
new file mode 100644
index 000000000000..0a07ed1b1beb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/marvell,armada-3700-rwtm-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 3700 rWTM Mailbox
+
+maintainers:
+  - Marek Behún <kabel@kernel.org>
+
+properties:
+  compatible:
+    const: marvell,armada-3700-rwtm-mailbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#mbox-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@b0000 {
+        compatible = "marvell,armada-3700-rwtm-mailbox";
+        reg = <0xb0000 0x100>;
+        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
new file mode 100644
index 000000000000..587126d03fc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mediatek,gce-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Global Command Engine Mailbox
+
+maintainers:
+  - Houlong Wei <houlong.wei@mediatek.com>
+
+description:
+  The Global Command Engine (GCE) is used to help read/write registers with
+  critical time limitation, such as updating display configuration during the
+  vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6779-gce
+          - mediatek,mt8173-gce
+          - mediatek,mt8183-gce
+          - mediatek,mt8186-gce
+          - mediatek,mt8188-gce
+          - mediatek,mt8192-gce
+          - mediatek,mt8195-gce
+          - mediatek,mt8196-gce
+      - items:
+          - const: mediatek,mt6795-gce
+          - const: mediatek,mt8173-gce
+
+  "#mbox-cells":
+    const: 2
+    description:
+      The first cell describes the Thread ID of the GCE,
+      the second cell describes the priority of the GCE thread
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Global Command Engine clock
+
+  clock-names:
+    items:
+      - const: gce
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#mbox-cells"
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gce: mailbox@10212000 {
+            compatible = "mediatek,mt8173-gce";
+            reg = <0 0x10212000 0 0x1000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+            #mbox-cells = <2>;
+            clocks = <&infracfg CLK_INFRA_GCE>;
+            clock-names = "gce";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml
new file mode 100644
index 000000000000..c25eed4606fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-props.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mediatek,gce-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Global Command Engine Common Properties
+
+maintainers:
+  - Houlong Wei <houlong.wei@mediatek.com>
+
+description:
+  The Global Command Engine (GCE) is an instruction based, multi-threaded,
+  single-core command dispatcher for MediaTek hardware. The Command Queue
+  (CMDQ) mailbox driver is a driver for GCE, implemented using the Linux
+  mailbox framework. It is used to receive messages from mailbox consumers
+  and configure GCE to execute the specified instruction set in the message.
+  We use mediatek,gce-mailbox.yaml to define the properties for CMDQ mailbox
+  driver. A device driver that uses the CMDQ driver to configure its hardware
+  registers is a mailbox consumer. The mailbox consumer can request a mailbox
+  channel corresponding to a GCE hardware thread to send a message, specifying
+  that the GCE thread to configure its hardware. The mailbox provider can also
+  reserve a mailbox channel to configure GCE hardware register by the specific
+  GCE thread. This binding defines the common GCE properties for both mailbox
+  provider and consumers.
+
+properties:
+  mediatek,gce-events:
+    description:
+      GCE has an event table in SRAM, consisting of 1024 event IDs (0~1023).
+      Each event ID has a boolean event value with the default value 0.
+      The property mediatek,gce-events is used to obtain the event IDs.
+      Some gce-events are hardware-bound and cannot be changed by software.
+      For instance, in MT8195, when VDO0_MUTEX is stream done, VDO_MUTEX will
+      send an event signal to GCE, setting the value of event ID 597 to 1.
+      Similarly, in MT8188, the value of event ID 574 will be set to 1 when
+      VOD0_MUTEX is stream done.
+      On the other hand, some gce-events are not hardware-bound and can be
+      changed by software. For example, in MT8188, we can set the value of
+      event ID 855, which is not bound to any hardware, to 1 when the driver
+      in the secure world completes a task. However, in MT8195, event ID 855
+      is already bound to VDEC_LAT1, so we need to select another event ID to
+      achieve the same purpose. This event ID can be any ID that is not bound
+      to any hardware and is not yet used in any software driver.
+      To determine if the event ID is bound to the hardware or used by a
+      software driver, refer to the GCE header
+      include/dt-bindings/gce/<chip>-gce.h of each chip.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 32
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,mt8196-gpueb-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,mt8196-gpueb-mbox.yaml
new file mode 100644
index 000000000000..ab5b780cb83a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mediatek,mt8196-gpueb-mbox.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mediatek,mt8196-gpueb-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MFlexGraphics GPUEB Mailbox Controller
+
+maintainers:
+  - Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8196-gpueb-mbox
+
+  reg:
+    items:
+      - description: mailbox data registers
+      - description: mailbox control registers
+
+  reg-names:
+    items:
+      - const: data
+      - const: ctl
+
+  clocks:
+    items:
+      - description: main clock of the GPUEB MCU
+
+  interrupts:
+    items:
+      - description: fires when a new message is received
+
+  "#mbox-cells":
+    const: 1
+    description:
+      The number of the mailbox channel.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mediatek,mt8196-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mailbox@4b09fd80 {
+        compatible = "mediatek,mt8196-gpueb-mbox";
+        reg = <0x4b09fd80 0x280>,
+              <0x4b170000 0x7c>;
+        reg-names = "data", "ctl";
+        clocks = <&topckgen CLK_TOP_MFG_EB>;
+        interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH 0>;
+        #mbox-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
new file mode 100644
index 000000000000..1332aab9a888
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/microchip,mpfs-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    const: microchip,mpfs-mailbox
+
+  reg:
+    oneOf:
+      - items:
+          - description: mailbox data registers
+      - items:
+          - description: mailbox control & data registers
+          - description: mailbox interrupt registers
+        deprecated: true
+      - items:
+          - description: mailbox control registers
+          - description: mailbox interrupt registers
+          - description: mailbox data registers
+        deprecated: true
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      mailbox@37020800 {
+        compatible = "microchip,mpfs-mailbox";
+        reg = <0x37020800 0x100>;
+        interrupt-parent = <&L1>;
+        interrupts = <96>;
+        #mbox-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml
deleted file mode 100644
index bbb173ea483c..000000000000
--- a/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml
+++ /dev/null
@@ -1,47 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: "http://devicetree.org/schemas/mailbox/microchip,polarfire-soc-mailbox.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-
-title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller
-
-maintainers:
-  - Conor Dooley <conor.dooley@microchip.com>
-
-properties:
-  compatible:
-    const: microchip,polarfire-soc-mailbox
-
-  reg:
-    items:
-      - description: mailbox data registers
-      - description: mailbox interrupt registers
-
-  interrupts:
-    maxItems: 1
-
-  "#mbox-cells":
-    const: 1
-
-required:
-  - compatible
-  - reg
-  - interrupts
-  - "#mbox-cells"
-
-additionalProperties: false
-
-examples:
-  - |
-    soc {
-      #address-cells = <2>;
-      #size-cells = <2>;
-      mbox: mailbox@37020000 {
-        compatible = "microchip,polarfire-soc-mailbox";
-        reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318c 0x0 0x40>;
-        interrupt-parent = <&L1>;
-        interrupts = <96>;
-        #mbox-cells = <1>;
-      };
-    };
diff --git a/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml b/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml
new file mode 100644
index 000000000000..8ed67ea7c883
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/microchip,sbi-ipc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Inter-processor communication (IPC) mailbox controller
+
+maintainers:
+  - Valentina Fernandez <valentina.fernandezalanis@microchip.com>
+
+description:
+  The Microchip Inter-processor Communication (IPC) facilitates
+  message passing between processors using an interrupt signaling
+  mechanism.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Intended for use by software running in supervisor privileged
+          mode (s-mode). This SBI interface is compatible with the Mi-V
+          Inter-hart Communication (IHC) IP.
+        const: microchip,sbi-ipc
+
+      - description:
+          Intended for use by the SBI implementation in machine mode
+          (m-mode), this compatible string is for the MIV_IHC Soft-IP.
+        const: microchip,miv-ihc-rtl-v2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 5
+    items:
+      enum:
+        - hart-0
+        - hart-1
+        - hart-2
+        - hart-3
+        - hart-4
+        - hart-5
+
+  "#mbox-cells":
+    description: >
+      For "microchip,sbi-ipc", the cell represents the global "logical"
+      channel IDs. The meaning of channel IDs are platform firmware dependent.
+
+      For "microchip,miv-ihc-rtl-v2", the cell represents the physical
+      channel and does not vary based on the platform firmware.
+    const: 1
+
+  microchip,ihc-chan-disabled-mask:
+    description: >
+      Represents the enable/disable state of the bi-directional IHC
+      channels within the MIV-IHC IP configuration.
+
+      A bit set to '1' indicates that the corresponding channel is disabled,
+      and any read or write operations to that channel will return zero.
+
+      A bit set to '0' indicates that the corresponding channel is enabled
+      and will be accessible through its dedicated address range registers.
+
+      The actual enable/disable state of each channel is determined by the
+      IP block’s configuration.
+    $ref: /schemas/types.yaml#/definitions/uint16
+    maximum: 0x7fff
+    default: 0
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - "#mbox-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: microchip,sbi-ipc
+    then:
+      properties:
+        reg:
+          not: {}
+          description:
+            The 'microchip,sbi-ipc' operates in a programming model
+            that does not require memory-mapped I/O (MMIO) registers
+            since it uses SBI ecalls provided by the m-mode/firmware
+            SBI implementation to access hardware registers.
+        microchip,ihc-chan-disabled-mask: false
+    else:
+      required:
+        - reg
+        - microchip,ihc-chan-disabled-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox {
+      compatible = "microchip,sbi-ipc";
+      interrupt-parent = <&plic>;
+      interrupts = <180>, <179>, <178>;
+      interrupt-names = "hart-1", "hart-2", "hart-3";
+      #mbox-cells = <1>;
+    };
+  - |
+    mailbox@50000000 {
+      compatible = "microchip,miv-ihc-rtl-v2";
+      microchip,ihc-chan-disabled-mask = /bits/ 16 <0>;
+      reg = <0x50000000 0x1c000>;
+      interrupt-parent = <&plic>;
+      interrupts = <180>, <179>, <178>;
+      interrupt-names = "hart-1", "hart-2", "hart-3";
+      #mbox-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
new file mode 100644
index 000000000000..4ca0d5e49c79
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mtk,adsp-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek ADSP mailbox
+
+maintainers:
+  - Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
+
+description: |
+  The MTK ADSP mailbox Inter-Processor Communication (IPC) enables the SoC
+  to communicate with ADSP by passing messages through two mailbox channels.
+  The MTK ADSP mailbox IPC also provides the ability for one processor to
+  signal the other processor using interrupts.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8186-adsp-mbox
+          - mediatek,mt8195-adsp-mbox
+      - items:
+          - enum:
+              - mediatek,mt8188-adsp-mbox
+          - const: mediatek,mt8186-adsp-mbox
+
+  "#mbox-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#mbox-cells"
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    adsp_mailbox0:mailbox@10816000 {
+        compatible = "mediatek,mt8195-adsp-mbox";
+        #mbox-cells = <0>;
+        reg = <0x10816000 0x1000>;
+        interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
deleted file mode 100644
index 98fe37e8b17b..000000000000
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-MediaTek GCE
-===============
-
-The Global Command Engine (GCE) is used to help read/write registers with
-critical time limitation, such as updating display configuration during the
-vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
-
-CMDQ driver uses mailbox framework for communication. Please refer to
-mailbox.txt for generic information about mailbox device-tree bindings.
-
-Required properties:
-- compatible: can be "mediatek,mt8173-gce", "mediatek,mt8183-gce",
-  "mediatek,mt8192-gce", "mediatek,mt8195-gce" or "mediatek,mt6779-gce".
-- reg: Address range of the GCE unit
-- interrupts: The interrupt signal from the GCE block
-- clock: Clocks according to the common clock binding
-- clock-names: Must be "gce" to stand for GCE clock
-- #mbox-cells: Should be 2.
-	<&phandle channel priority>
-	phandle: Label name of a gce node.
-	channel: Channel of mailbox. Be equal to the thread id of GCE.
-	priority: Priority of GCE thread.
-
-Required properties for a client device:
-- mboxes: Client use mailbox to communicate with GCE, it should have this
-  property and list of phandle, mailbox specifiers.
-Optional properties for a client device:
-- mediatek,gce-client-reg: Specify the sub-system id which is corresponding
-  to the register address, it should have this property and list of phandle,
-  sub-system specifiers.
-  <&phandle subsys_number start_offset size>
-  phandle: Label name of a gce node.
-  subsys_number: specify the sub-system id which is corresponding
-                 to the register address.
-  start_offset: the start offset of register address that GCE can access.
-  size: the total size of register address that GCE can access.
-
-Optional properties for a client mutex node:
-- mediatek,gce-events: GCE events used by clients. The event numbers are
-  defined in 'dt-bindings/gce/<chip>-gce.h'.
-
-Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h',
-'dt-bindings/gce/mt8183-gce.h', 'dt-bindings/gce/mt8192-gce.h',
-'dt-bindings/gce/mt8195-gce.h' or 'dt-bindings/gce/mt6779-gce.h'.
-Such as sub-system ids, thread priority, event ids.
-
-Example:
-
-	gce: gce@10212000 {
-		compatible = "mediatek,mt8173-gce";
-		reg = <0 0x10212000 0 0x1000>;
-		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_GCE>;
-		clock-names = "gce";
-		#mbox-cells = <2>;
-	};
-
-Example for a client device:
-
-	mmsys: clock-controller@14000000 {
-		compatible = "mediatek,mt8173-mmsys";
-		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST>,
-			 <&gce 1 CMDQ_THR_PRIO_LOWEST>;
-		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
-				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-		mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>,
-					  <&gce SUBSYS_1401XXXX 0x2000 0x100>;
-		...
-	};
-
-Example for a client mutex node:
-	mutex: mutex@14020000 {
-		compatible = "mediatek,mt8173-disp-mutex";
-		reg = <0 0x14020000 0 0x1000>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		clocks = <&mmsys CLK_MM_MUTEX_32K>;
-		mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
-				      <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
deleted file mode 100644
index ff3eafc5a882..000000000000
--- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-NVIDIA Tegra Hardware Synchronization Primitives (HSP)
-
-The HSP modules are used for the processors to share resources and communicate
-together. It provides a set of hardware synchronization primitives for
-interprocessor communication. So the interprocessor communication (IPC)
-protocols can use hardware synchronization primitives, when operating between
-two processors not in an SMP relationship.
-
-The features that HSP supported are shared mailboxes, shared semaphores,
-arbitrated semaphores and doorbells.
-
-Required properties:
-- name : Should be hsp
-- compatible
-    Array of strings.
-    one of:
-    - "nvidia,tegra186-hsp"
-    - "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"
-- reg : Offset and length of the register set for the device.
-- interrupt-names
-    Array of strings.
-    Contains a list of names for the interrupts described by the interrupt
-    property. May contain the following entries, in any order:
-    - "doorbell"
-    - "sharedN", where 'N' is a number from zero up to the number of
-      external interrupts supported by the HSP instance minus one.
-    Users of this binding MUST look up entries in the interrupt property
-    by name, using this interrupt-names property to do so.
-- interrupts
-    Array of interrupt specifiers.
-    Must contain one entry per entry in the interrupt-names property,
-    in a matching order.
-- #mbox-cells : Should be 2.
-
-The mbox specifier of the "mboxes" property in the client node should contain
-two cells. The first cell determines the HSP type and the second cell is used
-to identify the mailbox that the client is going to use.
-
-For doorbells, the second cell specifies the index of the doorbell to use.
-
-For shared mailboxes, the second cell is composed of two fields:
-- bits 31..24:
-    A bit mask of flags that further specify how the shared mailbox will be
-    used. Valid flags are:
-    - bit 31:
-        Defines the direction of the mailbox. If set, the mailbox will be used
-        as a producer (i.e. used to send data). If cleared, the mailbox is the
-        consumer of data sent by a producer.
-
-- bits 23.. 0:
-    The index of the shared mailbox to use. The number of available mailboxes
-    may vary by instance of the HSP block and SoC generation.
-
-The following file contains definitions that can be used to construct mailbox
-specifiers:
-
-    <dt-bindings/mailbox/tegra186-hsp.h>
-
-Example:
-
-hsp_top0: hsp@3c00000 {
-	compatible = "nvidia,tegra186-hsp";
-	reg = <0x0 0x03c00000 0x0 0xa0000>;
-	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "doorbell";
-	#mbox-cells = <2>;
-};
-
-client {
-	...
-	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_XXX>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
new file mode 100644
index 000000000000..f833b845de0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/nvidia,tegra186-hsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Hardware Synchronization Primitives (HSP)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The HSP modules are used for the processors to share resources and
+  communicate together. It provides a set of hardware synchronization
+  primitives for interprocessor communication. So the interprocessor
+  communication (IPC) protocols can use hardware synchronization
+  primitives, when operating between two processors not in an SMP
+  relationship.
+
+  The features that HSP supported are shared mailboxes, shared
+  semaphores, arbitrated semaphores and doorbells.
+
+  The mbox specifier of the "mboxes" property in the client node should
+  contain two cells. The first cell determines the HSP type and the
+  second cell is used to identify the mailbox that the client is going
+  to use.
+
+  For shared mailboxes, the first cell composed of two fields:
+    - bits 15..8:
+        A bit mask of flags that further specifies the type of shared
+        mailbox to be used (based on the data size). If no flag is
+        specified then, 32-bit shared mailbox is used.
+    - bits 7..0:
+        Defines the type of the mailbox to be used. This field should be
+        TEGRA_HSP_MBOX_TYPE_SM for shared mailboxes.
+
+  For doorbells, the second cell specifies the index of the doorbell to
+  use.
+
+  For shared mailboxes, the second cell is composed of two fields:
+    - bits 31..24:
+        A bit mask of flags that further specify how the shared mailbox
+        will be used. Valid flags are:
+          - bit 31:
+              Defines the direction of the mailbox. If set, the mailbox
+              will be used as a producer (i.e. used to send data). If
+              cleared, the mailbox is the consumer of data sent by a
+              producer.
+
+    - bits 23..0:
+        The index of the shared mailbox to use. The number of available
+        mailboxes may vary by instance of the HSP block and SoC
+        generation.
+
+    The following file contains definitions that can be used to
+    construct mailbox specifiers:
+
+        <dt-bindings/mailbox/tegra186-hsp.h>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra186-hsp
+          - nvidia,tegra194-hsp
+          - nvidia,tegra264-hsp
+      - items:
+          - const: nvidia,tegra234-hsp
+          - const: nvidia,tegra194-hsp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 17
+
+  interrupt-names:
+    oneOf:
+      # shared interrupts are optional
+      - items:
+          - const: doorbell
+
+      - items:
+          - const: doorbell
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+          - pattern: "^shared([0-9]|1[0-5])$"
+
+      - items:
+          - const: doorbell
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+
+      - items:
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+
+  "#mbox-cells":
+    const: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+    mailbox@3c00000 {
+        compatible = "nvidia,tegra186-hsp";
+        reg = <0x03c00000 0xa0000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "doorbell";
+        #mbox-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index 01e9d9155c83..f40dc9048327 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mailbox/qcom,apcs-kpss-global.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mailbox/qcom,apcs-kpss-global.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm APCS global block bindings
+title: Qualcomm APCS global block
 
 description:
   This binding describes the APCS "global" block found in various Qualcomm
@@ -15,24 +15,56 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,ipq6018-apcs-apps-global
-      - qcom,ipq8074-apcs-apps-global
-      - qcom,msm8916-apcs-kpss-global
-      - qcom,msm8939-apcs-kpss-global
-      - qcom,msm8953-apcs-kpss-global
-      - qcom,msm8994-apcs-kpss-global
-      - qcom,msm8996-apcs-hmss-global
-      - qcom,msm8998-apcs-hmss-global
-      - qcom,qcm2290-apcs-hmss-global
-      - qcom,qcs404-apcs-apps-global
-      - qcom,sc7180-apss-shared
-      - qcom,sc8180x-apss-shared
-      - qcom,sdm660-apcs-hmss-global
-      - qcom,sdm845-apss-shared
-      - qcom,sm6125-apcs-hmss-global
-      - qcom,sm6115-apcs-hmss-global
-      - qcom,sm8150-apss-shared
+    oneOf:
+      - items:
+          - enum:
+              - qcom,ipq5018-apcs-apps-global
+              - qcom,ipq5332-apcs-apps-global
+              - qcom,ipq5424-apcs-apps-global
+              - qcom,ipq8074-apcs-apps-global
+              - qcom,ipq9574-apcs-apps-global
+          - const: qcom,ipq6018-apcs-apps-global
+      - items:
+          - enum:
+              - qcom,msm8226-apcs-kpss-global
+              - qcom,qcs404-apcs-apps-global
+          - const: qcom,msm8916-apcs-kpss-global
+          - const: syscon
+      - items:
+          - enum:
+              - qcom,msm8974-apcs-kpss-global
+              - qcom,msm8976-apcs-kpss-global
+          - const: qcom,msm8994-apcs-kpss-global
+          - const: syscon
+      - items:
+          - enum:
+              - qcom,msm8998-apcs-hmss-global
+              - qcom,sdm660-apcs-hmss-global
+              - qcom,sm4250-apcs-hmss-global
+              - qcom,sm6115-apcs-hmss-global
+              - qcom,sm6125-apcs-hmss-global
+          - const: qcom,msm8994-apcs-kpss-global
+      - items:
+          - enum:
+              - qcom,qcs615-apss-shared
+              - qcom,sc7180-apss-shared
+              - qcom,sc8180x-apss-shared
+              - qcom,sm7150-apss-shared
+              - qcom,sm8150-apss-shared
+          - const: qcom,sdm845-apss-shared
+      - items:
+          - enum:
+              - qcom,msm8916-apcs-kpss-global
+              - qcom,msm8939-apcs-kpss-global
+              - qcom,msm8953-apcs-kpss-global
+              - qcom,msm8994-apcs-kpss-global
+              - qcom,sdx55-apcs-gcc
+          - const: syscon
+      - enum:
+          - qcom,ipq6018-apcs-apps-global
+          - qcom,msm8996-apcs-hmss-global
+          - qcom,qcm2290-apcs-hmss-global
+          - qcom,sdm845-apss-shared
 
   reg:
     maxItems: 1
@@ -40,23 +72,35 @@ properties:
   clocks:
     description: phandles to the parent clocks of the clock driver
     minItems: 2
-    items:
-      - description: primary pll parent of the clock driver
-      - description: auxiliary parent
-      - description: reference clock
+    maxItems: 3
+    deprecated: true
 
   '#mbox-cells':
     const: 1
 
   '#clock-cells':
-    const: 0
+    enum: [0, 1]
 
   clock-names:
     minItems: 2
-    items:
-      - const: pll
-      - const: aux
-      - const: ref
+    maxItems: 3
+    deprecated: true
+
+  clock-controller:
+    type: object
+    additionalProperties: false
+    properties:
+      clocks:
+        description: phandles to the parent clocks of the clock driver
+        minItems: 2
+        maxItems: 3
+
+      '#clock-cells':
+        enum: [0, 1]
+
+      clock-names:
+        minItems: 2
+        maxItems: 3
 
 required:
   - compatible
@@ -65,62 +109,180 @@ required:
 
 additionalProperties: false
 
+# Clocks should be specified either on the parent node or on the child node
+oneOf:
+  - required:
+      - clock-controller
+    properties:
+      clocks: false
+      clock-names: false
+      '#clock-cells': false
+  - properties:
+      clock-controller: false
+
+$defs:
+  msm8916-apcs-clock-controller:
+    properties:
+      clocks:
+        items:
+          - description: primary pll parent of the clock driver
+          - description: auxiliary parent
+      clock-names:
+        items:
+          - const: pll
+          - const: aux
+      '#clock-cells':
+        const: 0
+
+  msm8939-apcs-clock-controller:
+    properties:
+      clocks:
+        items:
+          - description: primary pll parent of the clock driver
+          - description: auxiliary parent
+          - description: reference clock
+      clock-names:
+        items:
+          - const: pll
+          - const: aux
+          - const: ref
+      '#clock-cells':
+        const: 0
+
+  sdx55-apcs-clock-controller:
+    properties:
+      clocks:
+        items:
+          - description: reference clock
+          - description: primary pll parent of the clock driver
+          - description: auxiliary parent
+      clock-names:
+        items:
+          - const: ref
+          - const: pll
+          - const: aux
+      '#clock-cells':
+        const: 0
+
+  ipq6018-apcs-clock-controller:
+    properties:
+      clocks:
+        items:
+          - description: primary pll parent of the clock driver
+          - description: XO clock
+          - description: GCC GPLL0 clock source
+      clock-names:
+        items:
+          - const: pll
+          - const: xo
+          - const: gpll0
+      '#clock-cells':
+        const: 1
+
 allOf:
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,ipq6018-apcs-apps-global
-            - qcom,ipq8074-apcs-apps-global
-            - qcom,msm8916-apcs-kpss-global
-            - qcom,msm8994-apcs-kpss-global
-            - qcom,msm8996-apcs-hmss-global
-            - qcom,msm8998-apcs-hmss-global
-            - qcom,qcs404-apcs-apps-global
-            - qcom,sc7180-apss-shared
-            - qcom,sdm660-apcs-hmss-global
-            - qcom,sdm845-apss-shared
-            - qcom,sm6125-apcs-hmss-global
-            - qcom,sm8150-apss-shared
+          contains:
+            enum:
+              - qcom,msm8916-apcs-kpss-global
     then:
+      $ref: '#/$defs/msm8916-apcs-clock-controller'
       properties:
-        clocks:
-          maxItems: 2
+        clock-controller:
+          $ref: '#/$defs/msm8916-apcs-clock-controller'
+
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sdx55-apcs-gcc
+          contains:
+            enum:
+              - qcom,msm8939-apcs-kpss-global
     then:
+      $ref: '#/$defs/msm8939-apcs-clock-controller'
       properties:
-        clocks:
-          maxItems: 3
+        clock-controller:
+          $ref: '#/$defs/msm8939-apcs-clock-controller'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx55-apcs-gcc
+    then:
+      $ref: '#/$defs/sdx55-apcs-clock-controller'
+      properties:
+        clock-controller:
+          $ref: '#/$defs/sdx55-apcs-clock-controller'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-apcs-apps-global
+    then:
+      $ref: '#/$defs/ipq6018-apcs-clock-controller'
+      properties:
+        clock-controller:
+          $ref: '#/$defs/ipq6018-apcs-clock-controller'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8953-apcs-kpss-global
+              - qcom,msm8994-apcs-kpss-global
+              - qcom,msm8996-apcs-hmss-global
+              - qcom,qcm2290-apcs-hmss-global
+              - qcom,sdm845-apss-shared
+    then:
+      properties:
+        clocks: false
+        clock-names: false
+        clock-controller: false
+        '#clock-cells':
+          const: 0
+
 examples:
 
   # Example apcs with msm8996
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    apcs_glb: mailbox@9820000 {
+    mailbox@9820000 {
         compatible = "qcom,msm8996-apcs-hmss-global";
         reg = <0x9820000 0x1000>;
 
         #mbox-cells = <1>;
+        #clock-cells = <0>;
     };
 
-    rpm-glink {
-        compatible = "qcom,glink-rpm";
-        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-        qcom,rpm-msg-ram = <&rpm_msg_ram>;
-        mboxes = <&apcs_glb 0>;
-        mbox-names = "rpm_hlos";
+  # Example apcs with qcs404
+  - |
+    #define GCC_APSS_AHB_CLK_SRC  1
+    #define GCC_GPLL0_AO_OUT_MAIN 123
+    mailbox@b011000 {
+        compatible = "qcom,qcs404-apcs-apps-global",
+                     "qcom,msm8916-apcs-kpss-global", "syscon";
+        reg = <0x0b011000 0x1000>;
+        #mbox-cells = <1>;
+
+        apcs_clk: clock-controller {
+          clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
+          clock-names = "pll", "aux";
+          #clock-cells = <0>;
+        };
     };
 
-  # Example apcs with qcs404
+  # Example apcs with qcs404 (deprecated: use clock-controller subnode)
   - |
     #define GCC_APSS_AHB_CLK_SRC  1
     #define GCC_GPLL0_AO_OUT_MAIN 123
     apcs: mailbox@b011000 {
-        compatible = "qcom,qcs404-apcs-apps-global";
+        compatible = "qcom,qcs404-apcs-apps-global",
+                     "qcom,msm8916-apcs-kpss-global", "syscon";
         reg = <0x0b011000 0x1000>;
         #mbox-cells = <1>;
         clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml
new file mode 100644
index 000000000000..9122c3d2dc30
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/qcom,cpucp-mbox.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/qcom,cpucp-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUCP Mailbox Controller
+
+maintainers:
+  - Sibi Sankar <quic_sibis@quicinc.com>
+
+description:
+  The CPUSS Control Processor (CPUCP) mailbox controller enables communication
+  between AP and CPUCP by acting as a doorbell between them.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,glymur-cpucp-mbox
+          - const: qcom,x1e80100-cpucp-mbox
+      - enum:
+          - qcom,x1e80100-cpucp-mbox
+
+  reg:
+    items:
+      - description: CPUCP rx register region
+      - description: CPUCP tx register region
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@17430000 {
+        compatible = "qcom,x1e80100-cpucp-mbox";
+        reg = <0x17430000 0x10000>, <0x18830000 0x10000>;
+        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
index 866efb278813..e5c423130db6 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
@@ -24,10 +24,24 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,milos-ipcc
+          - qcom,qcs8300-ipcc
+          - qcom,qdu1000-ipcc
+          - qcom,sa8255p-ipcc
+          - qcom,sa8775p-ipcc
+          - qcom,sar2130p-ipcc
+          - qcom,sc7280-ipcc
+          - qcom,sc8280xp-ipcc
+          - qcom,sdx75-ipcc
           - qcom,sm6350-ipcc
+          - qcom,sm6375-ipcc
           - qcom,sm8250-ipcc
           - qcom,sm8350-ipcc
-          - qcom,sc7280-ipcc
+          - qcom,sm8450-ipcc
+          - qcom,sm8550-ipcc
+          - qcom,sm8650-ipcc
+          - qcom,sm8750-ipcc
+          - qcom,x1e80100-ipcc
       - const: qcom,ipcc
 
   reg:
@@ -61,23 +75,14 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/mailbox/qcom-ipcc.h>
-
-        mailbox@408000 {
-                compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
-                reg = <0x408000 0x1000>;
-                interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
-                interrupt-controller;
-                #interrupt-cells = <3>;
-                #mbox-cells = <2>;
-        };
-
-        smp2p-modem {
-                compatible = "qcom,smp2p";
-                interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS
-                                IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>;
-                mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
 
-                /* Other SMP2P fields */
-        };
+    mailbox@408000 {
+        compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
+        reg = <0x408000 0x1000>;
+        interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+        #mbox-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml b/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml
new file mode 100644
index 000000000000..3aabc52a0c03
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/riscv,rpmi-shmem-mbox.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/riscv,rpmi-shmem-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V Platform Management Interface (RPMI) shared memory mailbox
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V Platform Management Interface (RPMI) [1] defines a common shared
+  memory based RPMI transport. This RPMI shared memory transport integrates as
+  mailbox controller in the SBI implementation or supervisor software whereas
+  each RPMI service group is mailbox client in the SBI implementation and
+  supervisor software.
+
+  ===========================================
+  References
+  ===========================================
+
+  [1] RISC-V Platform Management Interface (RPMI) v1.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-rpmi/releases
+
+properties:
+  compatible:
+    const: riscv,rpmi-shmem-mbox
+
+  reg:
+    minItems: 2
+    items:
+      - description: A2P request queue base address
+      - description: P2A acknowledgment queue base address
+      - description: P2A request queue base address
+      - description: A2P acknowledgment queue base address
+      - description: A2P doorbell address
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: a2p-req
+      - const: p2a-ack
+      - enum: [ p2a-req, a2p-doorbell ]
+      - const: a2p-ack
+      - const: a2p-doorbell
+
+  interrupts:
+    maxItems: 1
+    description:
+      The RPMI shared memory transport supports P2A doorbell as a wired
+      interrupt and this property specifies the interrupt source.
+
+  msi-parent:
+    description:
+      The RPMI shared memory transport supports P2A doorbell as a system MSI
+      and this property specifies the target MSI controller.
+
+  riscv,slot-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 64
+    description:
+      Power-of-2 RPMI slot size of the RPMI shared memory transport.
+
+  riscv,a2p-doorbell-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x1
+    description:
+      Value written to the 32-bit A2P doorbell register.
+
+  riscv,p2a-doorbell-sysmsi-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The RPMI shared memory transport supports P2A doorbell as a system MSI
+      and this property specifies system MSI index to be used for configuring
+      the P2A doorbell MSI.
+
+  "#mbox-cells":
+    const: 1
+    description:
+      The first cell specifies RPMI service group ID.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - riscv,slot-size
+  - "#mbox-cells"
+
+anyOf:
+  - required:
+      - interrupts
+  - required:
+      - msi-parent
+
+additionalProperties: false
+
+examples:
+  - |
+    // Example 1 (RPMI shared memory with only 2 queues):
+    mailbox@10080000 {
+        compatible = "riscv,rpmi-shmem-mbox";
+        reg = <0x10080000 0x10000>,
+              <0x10090000 0x10000>;
+        reg-names = "a2p-req", "p2a-ack";
+        msi-parent = <&imsic_mlevel>;
+        riscv,slot-size = <64>;
+        #mbox-cells = <1>;
+    };
+  - |
+    // Example 2 (RPMI shared memory with only 4 queues):
+    mailbox@10001000 {
+        compatible = "riscv,rpmi-shmem-mbox";
+        reg = <0x10001000 0x800>,
+              <0x10001800 0x800>,
+              <0x10002000 0x800>,
+              <0x10002800 0x800>,
+              <0x10003000 0x4>;
+        reg-names = "a2p-req", "p2a-ack", "p2a-req", "a2p-ack", "a2p-doorbell";
+        msi-parent = <&imsic_mlevel>;
+        riscv,slot-size = <64>;
+        riscv,a2p-doorbell-value = <0x00008000>;
+        #mbox-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/riscv,sbi-mpxy-mbox.yaml b/Documentation/devicetree/bindings/mailbox/riscv,sbi-mpxy-mbox.yaml
new file mode 100644
index 000000000000..061437a0b45a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/riscv,sbi-mpxy-mbox.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/riscv,sbi-mpxy-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V SBI Message Proxy (MPXY) extension based mailbox
+
+maintainers:
+  - Anup Patel <anup@brainfault.org>
+
+description: |
+  The RISC-V SBI Message Proxy (MPXY) extension [1] allows supervisor
+  software to send messages through the SBI implementation (M-mode
+  firmware or HS-mode hypervisor). The underlying message protocol
+  and message format used by the supervisor software could be some
+  other standard protocol compatible with the SBI MPXY extension
+  (such as RISC-V Platform Management Interface (RPMI) [2]).
+
+  ===========================================
+  References
+  ===========================================
+
+  [1] RISC-V Supervisor Binary Interface (SBI) v3.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-sbi-doc/releases
+
+  [2] RISC-V Platform Management Interface (RPMI) v1.0 (or higher)
+      https://github.com/riscv-non-isa/riscv-rpmi/releases
+
+properties:
+  compatible:
+    const: riscv,sbi-mpxy-mbox
+
+  "#mbox-cells":
+    const: 2
+    description:
+      The first cell specifies channel_id of the SBI MPXY channel,
+      the second cell specifies MSG_PROT_ID of the SBI MPXY channel
+
+required:
+  - compatible
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    mailbox {
+          compatible = "riscv,sbi-mpxy-mbox";
+          #mbox-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/rockchip,rk3368-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/rockchip,rk3368-mailbox.yaml
new file mode 100644
index 000000000000..107bc96a8f3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/rockchip,rk3368-mailbox.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/rockchip,rk3368-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3368 Mailbox Controller
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The Rockchip mailbox is used by the Rockchip CPU cores to communicate
+  requests to MCU processor.
+
+properties:
+  compatible:
+    const: rockchip,rk3368-mailbox
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk_mailbox
+
+  interrupts:
+    description: One interrupt for each channel
+    maxItems: 4
+
+  '#mbox-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mailbox@ff6b0000 {
+        compatible = "rockchip,rk3368-mailbox";
+        reg = <0xff6b0000 0x1000>;
+        interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt b/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt
deleted file mode 100644
index b6bb84acf5be..000000000000
--- a/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Rockchip mailbox
-
-The Rockchip mailbox is used by the Rockchip CPU cores to communicate
-requests to MCU processor.
-
-Refer to ./mailbox.txt for generic information about mailbox device-tree
-bindings.
-
-Required properties:
-
- - compatible: should be one of the following.
-   - "rockchip,rk3368-mbox" for rk3368
- - reg: physical base address of the controller and length of memory mapped
-	region.
- - interrupts: The interrupt number to the cpu. The interrupt specifier format
-	depends on the interrupt controller.
- - #mbox-cells: Common mailbox binding property to identify the number
-	of cells required for the mailbox specifier. Should be 1
-
-Example:
---------
-
-/* RK3368 */
-mbox: mbox@ff6b0000 {
-	compatible = "rockchip,rk3368-mailbox";
-	reg = <0x0 0xff6b0000 0x0 0x1000>,
-	interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-	#mbox-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/sophgo,cv1800b-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sophgo,cv1800b-mailbox.yaml
new file mode 100644
index 000000000000..24e126bd3a20
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/sophgo,cv1800b-mailbox.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/sophgo,cv1800b-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800/SG2000 mailbox controller
+
+maintainers:
+  - Yuntao Dai <d1581209858@live.com>
+  - Junhui Liu <junhui.liu@pigmoral.tech>
+
+description:
+  Mailboxes integrated in Sophgo CV1800/SG2000 SoCs have 8 channels, each
+  shipping an 8-byte FIFO. Any processor can write to an arbitrary channel
+  and raise interrupts to receivers. Sending messages to itself is also
+  supported.
+
+properties:
+  compatible:
+    const: sophgo,cv1800b-mailbox
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 2
+    description: |
+      <&phandle channel target>
+      phandle : Label name of mailbox controller
+      channel : 0-7, Channel index
+      target  : 0-3, Target processor ID
+
+      Sophgo CV1800/SG2000 SoCs include the following processors, numbered as:
+      <0> Cortex-A53 (Only available on CV181X/SG200X)
+      <1> C906B
+      <2> C906L
+      <3> 8051
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mailbox@1900000 {
+        compatible = "sophgo,cv1800b-mailbox";
+        reg = <0x01900000 0x1000>;
+        interrupts = <101 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
index 80feba82cbd6..b526f9c0c272 100644
--- a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Spreadtrum mailbox controller bindings
+title: Spreadtrum mailbox controller
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
diff --git a/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml
new file mode 100644
index 000000000000..a023c28dff49
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/st,sti-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Mailbox Driver for STi platform
+
+description:
+  Each ST Mailbox IP currently consists of 4 instances of 32 channels.
+  Messages are passed between Application and Remote processors using
+  shared memory.
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stih407-mailbox
+
+  reg:
+    maxItems: 1
+
+  mbox-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: name of the mailbox IP
+
+  interrupts:
+    description: the irq line for the RX mailbox
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mailbox0: mailbox@8f00000  {
+        compatible = "st,stih407-mailbox";
+        reg = <0x8f00000 0x1000>;
+        interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <2>;
+        mbox-name = "a9";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
index 8eb4bf52ea27..134fd223a02b 100644
--- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 IPC controller bindings
+title: STMicroelectronics STM32 IPC controller
 
 description:
   The IPCC block provides a non blocking signaling mechanism to post and
@@ -30,15 +30,11 @@ properties:
     items:
       - description: rx channel occupied
       - description: tx channel free
-      - description: wakeup source
-    minItems: 2
 
   interrupt-names:
     items:
       - const: rx
       - const: tx
-      - const: wakeup
-    minItems: 2
 
   wakeup-source: true
 
@@ -70,10 +66,9 @@ examples:
       #mbox-cells = <1>;
       reg = <0x4c001000 0x400>;
       st,proc-id = <0>;
-      interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
-      		      <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
-      		      <&aiec 62 1>;
-      interrupt-names = "rx", "tx", "wakeup";
+      interrupts-extended = <&exti 61 1>,
+                            <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "rx", "tx";
       clocks = <&rcc_clk IPCC>;
       wakeup-source;
     };
diff --git a/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt b/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt
deleted file mode 100644
index 351f612673fc..000000000000
--- a/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-ST Microelectronics Mailbox Driver
-
-Each ST Mailbox IP currently consists of 4 instances of 32 channels.  Messages
-are passed between Application and Remote processors using shared memory.
-
-Controller
-----------
-
-Required properties:
-- compatible		: Should be "st,stih407-mailbox"
-- reg			: Offset and length of the device's register set
-- mbox-name		: Name of the mailbox
-- #mbox-cells:		: Must be 2
-			  <&phandle instance channel direction>
-			    phandle   : Label name of controller
-			    instance  : Instance number
-			    channel   : Channel number
-
-Optional properties
-- interrupts		: Contains the IRQ line for a Rx mailbox
-
-Example:
-
-mailbox0: mailbox@0  {
-	compatible	= "st,stih407-mailbox";
-	reg		= <0x08f00000 0x1000>;
-	interrupts	= <GIC_SPI 1 IRQ_TYPE_NONE>;
-	#mbox-cells	= <2>;
-	mbox-name	= "a9";
-};
-
-Client
-------
-
-Required properties:
-- compatible		: Many (See the client docs)
-- reg			: Shared (between Application and Remote) memory address
-- mboxes		: Standard property to specify a Mailbox (See ./mailbox.txt)
-			  Cells must match 'mbox-cells' (See Controller docs above)
-
-Optional properties
-- mbox-names		: Name given to channels seen in the 'mboxes' property.
-
-Example:
-
-mailbox_test {
-	compatible	= "mailbox-test";
-	reg		= <0x[shared_memory_address], [shared_memory_size]>;
-	mboxes		= <&mailbox2 0 1>, <&mailbox0 2 1>;
-	mbox-names	= "tx",	"rx";
-};
diff --git a/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml b/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml
new file mode 100644
index 000000000000..0971fb97896e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/thead,th1520-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: T-head TH1520 Mailbox Controller
+
+description:
+  The T-head mailbox controller enables communication and coordination between
+  cores within the SoC by passing messages (e.g., data, status, and control)
+  through mailbox channels. It also allows one core to signal another processor
+  using interrupts via the Interrupt Controller Unit (ICU).
+
+maintainers:
+  - Michal Wilczynski <m.wilczynski@samsung.com>
+
+properties:
+  compatible:
+    const: thead,th1520-mbox
+
+  clocks:
+    items:
+      - description: Clock for the local mailbox
+      - description: Clock for remote ICU 0
+      - description: Clock for remote ICU 1
+      - description: Clock for remote ICU 2
+
+  clock-names:
+    items:
+      - const: clk-local
+      - const: clk-remote-icu0
+      - const: clk-remote-icu1
+      - const: clk-remote-icu2
+
+  reg:
+    items:
+      - description: Mailbox local base address
+      - description: Remote ICU 0 base address
+      - description: Remote ICU 1 base address
+      - description: Remote ICU 2 base address
+
+  reg-names:
+    items:
+      - const: local
+      - const: remote-icu0
+      - const: remote-icu1
+      - const: remote-icu2
+
+  interrupts:
+    maxItems: 1
+
+  '#mbox-cells':
+    const: 1
+    description:
+      The one and only cell describes destination CPU ID.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/thead,th1520-clk-ap.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      mailbox@ffffc38000 {
+        compatible = "thead,th1520-mbox";
+        reg = <0xff 0xffc38000 0x0 0x4000>,
+              <0xff 0xffc44000 0x0 0x1000>,
+              <0xff 0xffc4c000 0x0 0x1000>,
+              <0xff 0xffc54000 0x0 0x1000>;
+        reg-names = "local", "remote-icu0", "remote-icu1", "remote-icu2";
+        clocks = <&clk CLK_MBOX0>, <&clk CLK_MBOX1>, <&clk CLK_MBOX2>,
+                 <&clk CLK_MBOX3>;
+        clock-names = "clk-local", "clk-remote-icu0", "clk-remote-icu1",
+                      "clk-remote-icu2";
+        interrupts = <28>;
+        #mbox-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
index e864d798168d..8504ceb64806 100644
--- a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/mailbox/ti,omap-mailbox.yaml#
@@ -159,7 +159,7 @@ properties:
       a corresponding sysc interconnect node.
 
       This property is only needed on some legacy OMAP SoCs which have not
-      yet been converted to the ti,sysc interconnect hierarachy, but is
+      yet been converted to the ti,sysc interconnect hierarchy, but is
       otherwise considered obsolete.
 
 patternProperties:
@@ -180,15 +180,6 @@ allOf:
         compatible:
           enum:
             - ti,am654-mailbox
-    then:
-      required:
-        - interrupt-parent
-
-  - if:
-      properties:
-        compatible:
-          enum:
-            - ti,am654-mailbox
             - ti,am64-mailbox
     then:
       properties:
@@ -251,7 +242,7 @@ examples:
   - |
     /* OMAP4 */
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    mailbox: mailbox@4a0f4000 {
+    mailbox@4a0f4000 {
         compatible = "ti,omap4-mailbox";
         reg = <0x4a0f4000 0x200>;
         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -269,13 +260,9 @@ examples:
         };
     };
 
-    dsp {
-        mboxes = <&mailbox &mbox_dsp>;
-    };
-
   - |
     /* AM33xx */
-    mailbox1: mailbox@480c8000 {
+    mailbox@480c8000 {
         compatible = "ti,omap4-mailbox";
         reg = <0x480c8000 0x200>;
         interrupts = <77>;
@@ -292,7 +279,7 @@ examples:
 
   - |
     /* AM65x */
-    mailbox0_cluster0: mailbox@31f80000 {
+    mailbox@31f80000 {
         compatible = "ti,am654-mailbox";
         reg = <0x31f80000 0x200>;
         #mbox-cells = <1>;
diff --git a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml
index eea822861804..c321b69f0ccd 100644
--- a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml
+++ b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.yaml
@@ -36,7 +36,7 @@ properties:
       - const: scfg
 
   reg:
-    minItems: 3
+    maxItems: 3
 
   interrupt-names:
     minItems: 1
@@ -68,12 +68,12 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     secure_proxy: mailbox@32c00000 {
-          compatible = "ti,am654-secure-proxy";
-          #mbox-cells = <1>;
-          reg-names = "target_data", "rt", "scfg";
-          reg = <0x32c00000 0x100000>,
-                <0x32400000 0x100000>,
-                <0x32800000 0x100000>;
-          interrupt-names = "rx_011";
-          interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+        compatible = "ti,am654-secure-proxy";
+        #mbox-cells = <1>;
+        reg-names = "target_data", "rt", "scfg";
+        reg = <0x32c00000 0x100000>,
+              <0x32400000 0x100000>,
+              <0x32800000 0x100000>;
+        interrupt-names = "rx_011";
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
     };
diff --git a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt
deleted file mode 100644
index e46451bb242f..000000000000
--- a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-The APM X-Gene SLIMpro mailbox is used to communicate messages between
-the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple
-interrupt based door bell mechanism and can exchange simple messages using the
-internal registers.
-
-There are total of 8 interrupts in this mailbox. Each used for an individual
-door bell (or mailbox channel).
-
-Required properties:
-- compatible:	Should be as "apm,xgene-slimpro-mbox".
-
-- reg:		Contains the mailbox register address range.
-
-- interrupts:	8 interrupts must be from 0 to 7, interrupt 0 define the
-		the interrupt for mailbox channel 0 and interrupt 1 for
-		mailbox channel 1 and so likewise for the reminder.
-
-- #mbox-cells:	only one to specify the mailbox channel number.
-
-Example:
-
-Mailbox Node:
-		mailbox: mailbox@10540000 {
-			compatible = "apm,xgene-slimpro-mbox";
-			reg = <0x0 0x10540000 0x0 0xa000>;
-			#mbox-cells = <1>;
-			interrupts =  	<0x0 0x0 0x4>,
-					<0x0 0x1 0x4>,
-					<0x0 0x2 0x4>,
-					<0x0 0x3 0x4>,
-					<0x0 0x4 0x4>,
-					<0x0 0x5 0x4>,
-					<0x0 0x6 0x4>,
-					<0x0 0x7 0x4>,
-		};
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
deleted file mode 100644
index ad76edccf881..000000000000
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-Xilinx IPI Mailbox Controller
-========================================
-
-The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
-messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
-agent owns registers used for notification and buffers for message.
-
-               +-------------------------------------+
-               | Xilinx ZynqMP IPI Controller        |
-               +-------------------------------------+
-    +--------------------------------------------------+
-ATF                    |                     |
-                       |                     |
-                       |                     |
-    +--------------------------+             |
-                       |                     |
-                       |                     |
-    +--------------------------------------------------+
-            +------------------------------------------+
-            |  +----------------+   +----------------+ |
-Hardware    |  |  IPI Agent     |   |  IPI Buffers   | |
-            |  |  Registers     |   |                | |
-            |  |                |   |                | |
-            |  +----------------+   +----------------+ |
-            |                                          |
-            | Xilinx IPI Agent Block                   |
-            +------------------------------------------+
-
-
-Controller Device Node:
-===========================
-Required properties:
---------------------
-IPI agent node:
-- compatible:		Shall be: "xlnx,zynqmp-ipi-mailbox"
-- interrupt-parent:	Phandle for the interrupt controller
-- interrupts:		Interrupt information corresponding to the
-			interrupt-names property.
-- xlnx,ipi-id:		local Xilinx IPI agent ID
-- #address-cells:	number of address cells of internal IPI mailbox nodes
-- #size-cells:		number of size cells of internal IPI mailbox nodes
-
-Internal IPI mailbox node:
-- reg:			IPI buffers address ranges
-- reg-names:		Names of the reg resources. It should have:
-			* local_request_region
-			  - IPI request msg buffer written by local and read
-			    by remote
-			* local_response_region
-			  - IPI response msg buffer written by local and read
-			    by remote
-			* remote_request_region
-			  - IPI request msg buffer written by remote and read
-			    by local
-			* remote_response_region
-			  - IPI response msg buffer written by remote and read
-			    by local
-- #mbox-cells:		Shall be 1. It contains:
-			* tx(0) or rx(1) channel
-- xlnx,ipi-id:		remote Xilinx IPI agent ID of which the mailbox is
-			connected to.
-
-Optional properties:
---------------------
-- method:              The method of accessing the IPI agent registers.
-                       Permitted values are: "smc" and "hvc". Default is
-                       "smc".
-
-Client Device Node:
-===========================
-Required properties:
---------------------
-- mboxes:		Standard property to specify a mailbox
-			(See ./mailbox.txt)
-- mbox-names:		List of identifier  strings for each mailbox
-			channel.
-
-Example:
-===========================
-	zynqmp_ipi {
-		compatible = "xlnx,zynqmp-ipi-mailbox";
-		interrupt-parent = <&gic>;
-		interrupts = <0 29 4>;
-		xlnx,ipi-id = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* APU<->RPU0 IPI mailbox controller */
-		ipi_mailbox_rpu0: mailbox@ff990400 {
-			reg = <0xff990400 0x20>,
-			      <0xff990420 0x20>,
-			      <0xff990080 0x20>,
-			      <0xff9900a0 0x20>;
-			reg-names = "local_request_region",
-				    "local_response_region",
-				    "remote_request_region",
-				    "remote_response_region";
-			#mbox-cells = <1>;
-			xlnx,ipi-id = <1>;
-		};
-		/* APU<->RPU1 IPI mailbox controller */
-		ipi_mailbox_rpu1: mailbox@ff990440 {
-			reg = <0xff990440 0x20>,
-			      <0xff990460 0x20>,
-			      <0xff990280 0x20>,
-			      <0xff9902a0 0x20>;
-			reg-names = "local_request_region",
-				    "local_response_region",
-				    "remote_request_region",
-				    "remote_response_region";
-			#mbox-cells = <1>;
-			xlnx,ipi-id = <2>;
-		};
-	};
-	rpu0 {
-		...
-		mboxes = <&ipi_mailbox_rpu0 0>,
-			 <&ipi_mailbox_rpu0 1>;
-		mbox-names = "tx", "rx";
-	};
-	rpu1 {
-		...
-		mboxes = <&ipi_mailbox_rpu1 0>,
-			 <&ipi_mailbox_rpu1 1>;
-		mbox-names = "tx", "rx";
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
new file mode 100644
index 000000000000..04d6473d666f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
@@ -0,0 +1,253 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx IPI(Inter Processor Interrupt) mailbox controller
+
+description: |
+  The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
+  messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
+  agent owns registers used for notification and buffers for message.
+
+               +-------------------------------------+
+               | Xilinx ZynqMP IPI Controller        |
+               +-------------------------------------+
+    +--------------------------------------------------+
+  TF-A                   |                     |
+                         |                     |
+                         |                     |
+    +--------------------------+               |
+                         |                     |
+                         |                     |
+    +--------------------------------------------------+
+              +------------------------------------------+
+              |  +----------------+   +----------------+ |
+  Hardware    |  |  IPI Agent     |   |  IPI Buffers   | |
+              |  |  Registers     |   |                | |
+              |  |                |   |                | |
+              |  +----------------+   +----------------+ |
+              |                                          |
+              | Xilinx IPI Agent Block                   |
+              +------------------------------------------+
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-ipi-mailbox
+      - xlnx,versal-ipi-mailbox
+
+  method:
+    description: |
+      The method of calling the PM-API firmware layer.
+      Permitted values are.
+      - "smc" : SMC #0, following the SMCCC
+      - "hvc" : HVC #0, following the SMCCC
+
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - smc
+      - hvc
+    default: smc
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    maxItems: 2
+
+  xlnx,ipi-id:
+    description: |
+      Remote Xilinx IPI agent ID of which the mailbox is connected to.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  interrupts:
+    maxItems: 1
+
+  ranges: true
+
+patternProperties:
+  '^mailbox@[0-9a-f]+$':
+    description: Internal ipi mailbox node
+    type: object  # DT nodes are json objects
+    additionalProperties: false
+    properties:
+
+      compatible:
+        enum:
+          - xlnx,zynqmp-ipi-dest-mailbox
+          - xlnx,versal-ipi-dest-mailbox
+
+      reg:
+        minItems: 1
+        maxItems: 4
+
+      reg-names:
+        minItems: 1
+        maxItems: 4
+
+      xlnx,ipi-id:
+        description:
+          Remote Xilinx IPI agent ID of which the mailbox is connected to.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      '#mbox-cells':
+        const: 1
+        description:
+          It contains tx(0) or rx(1) channel IPI id number.
+
+    allOf:
+      - if:
+          properties:
+            compatible:
+              contains:
+                enum:
+                  - xlnx,zynqmp-ipi-dest-mailbox
+        then:
+          properties:
+            reg:
+              maxItems: 4
+
+            reg-names:
+              items:
+                - const: local_request_region
+                - const: local_response_region
+                - const: remote_request_region
+                - const: remote_response_region
+        else:
+          properties:
+            reg:
+              minItems: 1
+              items:
+                - description: Remote IPI agent control register region
+                - description: Remote IPI agent optional message buffers
+
+            reg-names:
+              minItems: 1
+              items:
+                - const: ctrl
+                - const: msg
+
+    required:
+      - compatible
+      - reg
+      - reg-names
+      - '#mbox-cells'
+      - xlnx,ipi-id
+
+required:
+  - compatible
+  - interrupts
+  - '#address-cells'
+  - '#size-cells'
+  - xlnx,ipi-id
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynqmp-ipi-mailbox
+    then:
+      properties:
+        reg: false
+        reg-names: false
+
+    else:
+      properties:
+        reg:
+          items:
+            - description: Host IPI agent control register region
+            - description: Host IPI agent optional message buffers
+
+        reg-names:
+          items:
+            - const: ctrl
+            - const: msg
+
+      required:
+        - reg
+        - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    amba {
+      #address-cells = <0x2>;
+      #size-cells = <0x2>;
+      zynqmp-mailbox {
+        compatible = "xlnx,zynqmp-ipi-mailbox";
+        interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+        xlnx,ipi-id = <0>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges;
+
+        mailbox: mailbox@ff9905c0 {
+          compatible = "xlnx,zynqmp-ipi-dest-mailbox";
+          reg = <0x0 0xff9905c0 0x0 0x20>,
+                <0x0 0xff9905e0 0x0 0x20>,
+                <0x0 0xff990e80 0x0 0x20>,
+                <0x0 0xff990ea0 0x0 0x20>;
+          reg-names = "local_request_region",
+                      "local_response_region",
+                      "remote_request_region",
+                      "remote_response_region";
+          #mbox-cells = <1>;
+          xlnx,ipi-id = <4>;
+        };
+      };
+    };
+
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      mailbox@ff300000 {
+        compatible = "xlnx,versal-ipi-mailbox";
+        interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+        reg = <0x0 0xff300000 0x0 0x1000>,
+              <0x0 0xff990000 0x0 0x1ff>;
+        reg-names = "ctrl", "msg";
+        xlnx,ipi-id = <0>;
+        ranges;
+
+        /* buffered IPI */
+        mailbox@ff340000 {
+          compatible = "xlnx,versal-ipi-dest-mailbox";
+          reg = <0x0 0xff340000 0x0 0x1000>,
+                <0x0 0xff990400 0x0 0x1ff>;
+          reg-names = "ctrl", "msg";
+          #mbox-cells = <1>;
+          xlnx,ipi-id = <4>;
+        };
+
+        /* bufferless IPI */
+        mailbox@ff370000 {
+          compatible = "xlnx,versal-ipi-dest-mailbox";
+          reg = <0x0 0xff370000 0x0 0x1000>;
+          reg-names = "ctrl";
+          #mbox-cells = <1>;
+          xlnx,ipi-id = <7>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/allegro,al5e.yaml b/Documentation/devicetree/bindings/media/allegro,al5e.yaml
index 135bea94b587..2899d26d690e 100644
--- a/Documentation/devicetree/bindings/media/allegro,al5e.yaml
+++ b/Documentation/devicetree/bindings/media/allegro,al5e.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allegro,al5e.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allegro DVT Video IP Codecs Device Tree Bindings
+title: Allegro DVT Video IP Codecs
 
 maintainers:
   - Michael Tretter <m.tretter@pengutronix.de>
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
index 6ced94064215..617264ce477d 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
+title: Allwinner A10 CMOS Sensor Interface (CSI)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
index 6d8395d6bca0..42dfe22ad5f1 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-ir.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Infrared Controller Device Tree Bindings
+title: Allwinner A10 Infrared Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
-  - $ref: "rc.yaml#"
+  - $ref: rc.yaml#
 
 properties:
   compatible:
@@ -21,6 +21,7 @@ properties:
       - const: allwinner,sun6i-a31-ir
       - items:
           - enum:
+              - allwinner,suniv-f1c100s-ir
               - allwinner,sun8i-a83t-ir
               - allwinner,sun8i-r40-ir
               - allwinner,sun50i-a64-ir
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
index c34303b87a5b..541325f900a1 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-video-engine.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video Engine Device Tree Bindings
+title: Allwinner A10 Video Engine
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -20,6 +20,7 @@ properties:
       - allwinner,sun8i-h3-video-engine
       - allwinner,sun8i-v3s-video-engine
       - allwinner,sun8i-r40-video-engine
+      - allwinner,sun20i-d1-video-engine
       - allwinner,sun50i-a64-video-engine
       - allwinner,sun50i-h5-video-engine
       - allwinner,sun50i-h6-video-engine
@@ -47,6 +48,10 @@ properties:
 
   allwinner,sram:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
     description: Phandle to the device SRAM
 
   iommus:
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml
new file mode 100644
index 000000000000..8ba5177ac631
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun50i-h6-vpu-g2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hantro G2 VPU codec implemented on Allwinner H6 SoC
+
+maintainers:
+  - Jernej Skrabec <jernej.skrabec@gmail.com>
+
+description:
+  Hantro G2 video decode accelerator present on Allwinner H6 SoC.
+
+properties:
+  compatible:
+    const: allwinner,sun50i-h6-vpu-g2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    video-codec-g2@1c00000 {
+        compatible = "allwinner,sun50i-h6-vpu-g2";
+        reg = <0x01c00000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_VP9>;
+        iommus = <&iommu 5>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
index 8b568072a069..1aa5775ba2bc 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 CMOS Sensor Interface (CSI) Device Tree Bindings
+title: Allwinner A31 CMOS Sensor Interface (CSI)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -42,6 +42,7 @@ properties:
 
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
+    description: Parallel input port, connect to a parallel sensor
 
     properties:
       endpoint:
@@ -59,7 +60,28 @@ properties:
         required:
           - bus-width
 
-    additionalProperties: false
+    unevaluatedProperties: false
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: "#/properties/port"
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 bridge input port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Internal output port to the ISP
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
 
 required:
   - compatible
@@ -69,6 +91,12 @@ required:
   - clock-names
   - resets
 
+oneOf:
+  - required:
+      - ports
+  - required:
+      - port
+
 additionalProperties: false
 
 examples:
@@ -82,26 +110,32 @@ examples:
         reg = <0x01cb4000 0x1000>;
         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&ccu CLK_BUS_CSI>,
-                 <&ccu CLK_CSI1_SCLK>,
+                 <&ccu CLK_CSI_SCLK>,
                  <&ccu CLK_DRAM_CSI>;
         clock-names = "bus",
                       "mod",
                       "ram";
         resets = <&ccu RST_BUS_CSI>;
 
-        port {
-            /* Parallel bus endpoint */
-            csi1_ep: endpoint {
-                remote-endpoint = <&adv7611_ep>;
-                bus-width = <16>;
-
-                /*
-                 * If hsync-active/vsync-active are missing,
-                 * embedded BT.656 sync is used.
-                 */
-                 hsync-active = <0>; /* Active low */
-                 vsync-active = <0>; /* Active low */
-                 pclk-sample = <1>;  /* Rising */
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                /* Parallel bus endpoint */
+                csi1_ep: endpoint {
+                    remote-endpoint = <&adv7611_ep>;
+                    bus-width = <16>;
+
+                    /*
+                     * If hsync-active/vsync-active are missing,
+                     * embedded BT.656 sync is used.
+                     */
+                    hsync-active = <0>; /* Active low */
+                    vsync-active = <0>; /* Active low */
+                    pclk-sample = <1>;  /* Rising */
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
new file mode 100644
index 000000000000..3ea4a4290f23
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Image Signal Processor Driver (ISP)
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-isp
+      - allwinner,sun8i-v3s-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: DRAM Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CSI0 input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CSI1 input port
+
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-v3s-isp
+    then:
+      required:
+        - port@0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    isp: isp@1cb8000 {
+        compatible = "allwinner,sun8i-v3s-isp";
+        reg = <0x01cb8000 0x1000>;
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+             <&ccu CLK_CSI_SCLK>,
+             <&ccu CLK_DRAM_CSI>;
+        clock-names = "bus", "mod", "ram";
+        resets = <&ccu RST_BUS_CSI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                isp_in_csi0: endpoint {
+                    remote-endpoint = <&csi0_out_isp>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
new file mode 100644
index 000000000000..627b28e94354
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI CSI-2
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-mipi-csi2
+      - items:
+          - const: allwinner,sun8i-v3s-mipi-csi2
+          - const: allwinner,sun6i-a31-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  phys:
+    maxItems: 1
+    description: MIPI D-PHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port, connect to a MIPI CSI-2 sensor
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port, connect to a CSI controller
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    mipi_csi2: csi@1cb1000 {
+        compatible = "allwinner,sun8i-v3s-mipi-csi2",
+                     "allwinner,sun6i-a31-mipi-csi2";
+        reg = <0x01cb1000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI_SCLK>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_CSI>;
+
+        phys = <&dphy>;
+        phy-names = "dphy";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_csi2_in: port@0 {
+                reg = <0>;
+
+                mipi_csi2_in_ov5648: endpoint {
+                    data-lanes = <1 2 3 4>;
+
+                    remote-endpoint = <&ov5648_out_mipi_csi2>;
+                };
+            };
+
+            mipi_csi2_out: port@1 {
+                reg = <1>;
+
+                mipi_csi2_out_csi0: endpoint {
+                    remote-endpoint = <&csi0_in_mipi_csi2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
index a258832d520c..c2f292dd01ed 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-de2-rotate.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83T DE2 Rotate Device Tree Bindings
+title: Allwinner A83T DE2 Rotate
 
 maintainers:
   - Jernej Skrabec <jernej.skrabec@siol.net>
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
new file mode 100644
index 000000000000..3cac68a87ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83T MIPI CSI-2
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    const: allwinner,sun8i-a83t-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: MIPI-specific Clock
+      - description: Misc CSI Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: mipi
+      - const: misc
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port, connect to a MIPI CSI-2 sensor
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port, connect to a CSI controller
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+    mipi_csi2: csi@1cb1000 {
+        compatible = "allwinner,sun8i-a83t-mipi-csi2";
+        reg = <0x01cb1000 0x1000>;
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI_SCLK>,
+                 <&ccu CLK_MIPI_CSI>,
+                 <&ccu CLK_CSI_MISC>;
+        clock-names = "bus", "mod", "mipi", "misc";
+        resets = <&ccu RST_BUS_CSI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_csi2_in: port@0 {
+                reg = <0>;
+
+                mipi_csi2_in_ov8865: endpoint {
+                    data-lanes = <1 2 3 4>;
+
+                    remote-endpoint = <&ov8865_out_mipi_csi2>;
+                };
+            };
+
+            mipi_csi2_out: port@1 {
+                reg = <1>;
+
+                mipi_csi2_out_csi: endpoint {
+                    remote-endpoint = <&csi_in_mipi_csi2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
index b80980b1908e..3ccd52164f5b 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun8i-h3-deinterlace.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H3 Deinterlace Device Tree Bindings
+title: Allwinner H3 Deinterlace
 
 maintainers:
   - Jernej Skrabec <jernej.skrabec@siol.net>
diff --git a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
index bee93bd84771..f23fa6d06ad0 100644
--- a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
@@ -2,13 +2,13 @@
 # Copyright 2020 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/amlogic,axg-ge2d.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/amlogic,axg-ge2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic GE2D Acceleration Unit
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/media/amlogic,c3-isp.yaml b/Documentation/devicetree/bindings/media/amlogic,c3-isp.yaml
new file mode 100644
index 000000000000..123bf462f098
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,c3-isp.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,c3-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 Image Signal Processing Unit
+
+maintainers:
+  - Keke Li <keke.li@amlogic.com>
+
+description:
+  Amlogic ISP is the RAW image processing module
+  and supports three channels image output.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,c3-isp
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: isp
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: vapb
+      - const: isp0
+
+  interrupts:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: input port node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - clock-names
+  - interrupts
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+    #include <dt-bindings/power/amlogic,c3-pwrc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp: isp@ff000000 {
+            compatible = "amlogic,c3-isp";
+            reg = <0x0 0xff000000 0x0 0xf000>;
+            reg-names = "isp";
+            power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>;
+            clocks = <&clkc_periphs CLKID_VAPB>,
+                     <&clkc_periphs CLKID_ISP0>;
+            clock-names = "vapb", "isp0";
+            assigned-clocks = <&clkc_periphs CLKID_VAPB>,
+                              <&clkc_periphs CLKID_ISP0>;
+            assigned-clock-rates = <0>, <400000000>;
+            interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>;
+
+            port {
+                c3_isp_in: endpoint {
+                    remote-endpoint = <&c3_adap_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml
new file mode 100644
index 000000000000..ba43bc6709a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,c3-mipi-adapter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 MIPI adapter receiver
+
+maintainers:
+  - Keke Li <keke.li@amlogic.com>
+
+description:
+  MIPI adapter is used to convert the MIPI CSI-2 data
+  into an ISP supported data format.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,c3-mipi-adapter
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: top
+      - const: fd
+      - const: rd
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: vapb
+      - const: isp0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: input port node.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: output port node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+    #include <dt-bindings/power/amlogic,c3-pwrc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        adap: adap@ff010000 {
+            compatible = "amlogic,c3-mipi-adapter";
+            reg = <0x0 0xff010000 0x0 0x100>,
+                  <0x0 0xff01b000 0x0 0x100>,
+                  <0x0 0xff01d000 0x0 0x200>;
+            reg-names = "top", "fd", "rd";
+            power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>;
+            clocks = <&clkc_periphs CLKID_VAPB>,
+                     <&clkc_periphs CLKID_ISP0>;
+            clock-names = "vapb", "isp0";
+            assigned-clocks = <&clkc_periphs CLKID_VAPB>,
+                              <&clkc_periphs CLKID_ISP0>;
+            assigned-clock-rates = <0>, <400000000>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    c3_adap_in: endpoint {
+                        remote-endpoint = <&c3_mipi_csi_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    c3_adap_out: endpoint {
+                        remote-endpoint = <&c3_isp_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
new file mode 100644
index 000000000000..b0129beab0c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,c3-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 MIPI CSI-2 receiver
+
+maintainers:
+  - Keke Li <keke.li@amlogic.com>
+
+description:
+  MIPI CSI-2 receiver contains CSI-2 RX PHY and host controller.
+  It receives the MIPI data from the image sensor and sends MIPI data
+  to MIPI adapter.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,c3-mipi-csi2
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: aphy
+      - const: dphy
+      - const: host
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: vapb
+      - const: phy0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: input port node, connected to sensor.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: output port node
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+    #include <dt-bindings/power/amlogic,c3-pwrc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        csi: csi@ff018000 {
+            compatible = "amlogic,c3-mipi-csi2";
+            reg = <0x0 0xff018000 0x0 0x400>,
+                  <0x0 0xff019000 0x0 0x300>,
+                  <0x0 0xff01a000 0x0 0x100>;
+            reg-names = "aphy", "dphy", "host";
+            power-domains = <&pwrc PWRC_C3_MIPI_ISP_WRAP_ID>;
+            clocks =  <&clkc_periphs CLKID_VAPB>,
+                      <&clkc_periphs CLKID_CSI_PHY0>;
+            clock-names = "vapb", "phy0";
+            assigned-clocks = <&clkc_periphs CLKID_VAPB>,
+                              <&clkc_periphs CLKID_CSI_PHY0>;
+            assigned-clock-rates = <0>, <200000000>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    c3_mipi_csi_in: endpoint {
+                        remote-endpoint = <&imx290_out>;
+                        data-lanes = <1 2 3 4>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    c3_mipi_csi_out: endpoint {
+                        remote-endpoint = <&c3_adap_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
index 5044c4bb94e0..47dce75aeae6 100644
--- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Video Decoder
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Maxime Jourdan <mjourdan@baylibre.com>
 
 description: |
@@ -31,7 +31,8 @@ properties:
       - items:
           - enum:
               - amlogic,gxbb-vdec # GXBB (S905)
-              - amlogic,gxl-vdec # GXL (S905X, S905D)
+              - amlogic,gxl-vdec # GXL (S905D, S905W, S905X, S905Y)
+              - amlogic,gxlx-vdec # GXLX (S905L)
               - amlogic,gxm-vdec # GXM (S912)
           - const: amlogic,gx-vdec
       - enum:
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml
index 4432fea32650..6da8a6aded23 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/amlogic,meson-ir-tx.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/amlogic,meson-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson IR transmitter
 
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml
new file mode 100644
index 000000000000..0f95fe8dd9ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,meson6-ir.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson IR remote control receiver
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,meson6-ir
+          - amlogic,meson8b-ir
+          - amlogic,meson-gxbb-ir
+          - amlogic,meson-s4-ir
+      - items:
+          - const: amlogic,meson-gx-ir
+          - const: amlogic,meson-gxbb-ir
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    ir-receiver@c8100480 {
+        compatible = "amlogic,meson6-ir";
+        reg = <0xc8100480 0x20>;
+        interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
+    };
diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
new file mode 100644
index 000000000000..fa18013d705d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amphion,vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amphion VPU codec IP
+
+maintainers:
+  - Ming Qian <ming.qian@nxp.com>
+  - Shijie Qin <shijie.qin@nxp.com>
+
+description: |-
+  The Amphion MXC video encoder(Windsor) and decoder(Malone) accelerators present
+  on NXP i.MX8Q SoCs.
+
+properties:
+  $nodename:
+    pattern: "^vpu@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - nxp,imx8qm-vpu
+          - nxp,imx8qxp-vpu
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^mailbox@[0-9a-f]+$":
+    description:
+      Each vpu encoder or decoder correspond a MU, which used for communication
+      between driver and firmware. Implement via mailbox on driver.
+    $ref: /schemas/mailbox/fsl,mu.yaml#
+
+  "^vpu-core@[0-9a-f]+$":
+    description:
+      Each core correspond a decoder or encoder, need to configure them
+      separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC
+      has one decoder and one encoder.
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - nxp,imx8q-vpu-decoder
+              - nxp,imx8q-vpu-encoder
+
+      reg:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      mbox-names:
+        items:
+          - const: tx0
+          - const: tx1
+          - const: rx
+
+      mboxes:
+        description:
+          List of phandle of 2 MU channels for tx, 1 MU channel for rx.
+        maxItems: 3
+
+      memory-region:
+        description:
+          Phandle to the reserved memory nodes to be associated with the
+          remoteproc device. The reserved memory nodes should be carveout nodes,
+          and should be defined as per the bindings in
+          Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+        items:
+          - description: region reserved for firmware image sections.
+          - description: region used for RPC shared memory between firmware and
+                         driver.
+
+    required:
+      - compatible
+      - reg
+      - power-domains
+      - mbox-names
+      - mboxes
+      - memory-region
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  # Device node example for i.MX8QM platform:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    vpu: vpu@2c000000 {
+      compatible = "nxp,imx8qm-vpu";
+      ranges = <0x2c000000 0x2c000000 0x2000000>;
+      reg = <0x2c000000 0x1000000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      power-domains = <&pd IMX_SC_R_VPU>;
+
+      mu_m0: mailbox@2d000000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d000000 0x20000>;
+        interrupts = <0 472 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_0>;
+      };
+
+      mu1_m0: mailbox@2d020000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d020000 0x20000>;
+        interrupts = <0 473 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_1>;
+      };
+
+      mu2_m0: mailbox@2d040000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d040000 0x20000>;
+        interrupts = <0 474 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_2>;
+      };
+
+      vpu_core0: vpu-core@2d080000 {
+        compatible = "nxp,imx8q-vpu-decoder";
+        reg = <0x2d080000 0x10000>;
+        power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu_m0 0 0>,
+                 <&mu_m0 0 1>,
+                 <&mu_m0 1 0>;
+        memory-region = <&decoder_boot>, <&decoder_rpc>;
+      };
+
+      vpu_core1: vpu-core@2d090000 {
+        compatible = "nxp,imx8q-vpu-encoder";
+        reg = <0x2d090000 0x10000>;
+        power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu1_m0 0 0>,
+                 <&mu1_m0 0 1>,
+                 <&mu1_m0 1 0>;
+        memory-region = <&encoder1_boot>, <&encoder1_rpc>;
+      };
+
+      vpu_core2: vpu-core@2d0a0000 {
+        reg = <0x2d0a0000 0x10000>;
+        compatible = "nxp,imx8q-vpu-encoder";
+        power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu2_m0 0 0>,
+                 <&mu2_m0 0 1>,
+                 <&mu2_m0 1 0>;
+        memory-region = <&encoder2_boot>, <&encoder2_rpc>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/arm,mali-c55.yaml b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml
new file mode 100644
index 000000000000..fc4fcd19922a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/arm,mali-c55.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali-C55 Image Signal Processor
+
+maintainers:
+  - Daniel Scally <dan.scally@ideasonboard.com>
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+properties:
+  compatible:
+    const: arm,mali-c55
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: ISP Video Clock
+      - description: ISP AXI clock
+      - description: ISP AHB-lite clock
+
+  clock-names:
+    items:
+      - const: vclk
+      - const: aclk
+      - const: hclk
+
+  resets:
+    items:
+      - description: vclk domain reset
+      - description: aclk domain reset
+      - description: hclk domain reset
+
+  reset-names:
+    items:
+      - const: vresetn
+      - const: aresetn
+      - const: hresetn
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Input parallel video bus
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/properties/endpoint
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    isp@400000 {
+      compatible = "arm,mali-c55";
+      reg = <0x400000 0x200000>;
+      clocks = <&clk 0>, <&clk 1>, <&clk 2>;
+      clock-names = "vclk", "aclk", "hclk";
+      resets = <&resets 0>, <&resets 1>, <&resets 2>;
+      reset-names = "vresetn", "aresetn", "hresetn";
+      interrupts = <GIC_SPI 861 IRQ_TYPE_EDGE_RISING>;
+
+      port {
+        isp_in: endpoint {
+            remote-endpoint = <&csi2_rx_out>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/aspeed,video-engine.yaml b/Documentation/devicetree/bindings/media/aspeed,video-engine.yaml
new file mode 100644
index 000000000000..682bba20778c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/aspeed,video-engine.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/aspeed,video-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED Video Engine
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The Video Engine (VE) embedded in the ASPEED SOCs can be configured to
+  capture and compress video data from digital or analog sources.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-video-engine
+      - aspeed,ast2500-video-engine
+      - aspeed,ast2600-video-engine
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: vclk
+      - const: eclk
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+    description: |
+      Phandle to the reserved memory nodes to be associated with the
+      VE. VE will acquires memory space for 3 purposes:
+        1. JPEG header
+        2. Compressed result
+        3. Temporary transformed image data
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+
+    video@1e700000 {
+        compatible = "aspeed,ast2600-video-engine";
+        reg = <0x1e700000 0x1000>;
+        clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+                 <&syscon ASPEED_CLK_GATE_ECLK>;
+        clock-names = "vclk", "eclk";
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/media/aspeed-video.txt b/Documentation/devicetree/bindings/media/aspeed-video.txt
deleted file mode 100644
index d2ca32512272..000000000000
--- a/Documentation/devicetree/bindings/media/aspeed-video.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Device tree bindings for Aspeed Video Engine
-
-The Video Engine (VE) embedded in the Aspeed AST2400/2500/2600 SOCs can
-capture and compress video data from digital or analog sources.
-
-Required properties:
- - compatible:		"aspeed,ast2400-video-engine" or
-			"aspeed,ast2500-video-engine" or
-			"aspeed,ast2600-video-engine"
- - reg:			contains the offset and length of the VE memory region
- - clocks:		clock specifiers for the syscon clocks associated with
-			the VE (ordering must match the clock-names property)
- - clock-names:		"vclk" and "eclk"
- - resets:		reset specifier for the syscon reset associated with
-			the VE
- - interrupts:		the interrupt associated with the VE on this platform
-
-Optional properties:
- - memory-region:
-	phandle to a memory region to allocate from, as defined in
-	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-
-Example:
-
-video-engine@1e700000 {
-    compatible = "aspeed,ast2500-video-engine";
-    reg = <0x1e700000 0x20000>;
-    clocks = <&syscon ASPEED_CLK_GATE_VCLK>, <&syscon ASPEED_CLK_GATE_ECLK>;
-    clock-names = "vclk", "eclk";
-    resets = <&syscon ASPEED_RESET_VIDEO>;
-    interrupts = <7>;
-    memory-region = <&video_engine_memory>;
-};
diff --git a/Documentation/devicetree/bindings/media/atmel,isc.yaml b/Documentation/devicetree/bindings/media/atmel,isc.yaml
index cd6d7af0c768..dc8aba698d78 100644
--- a/Documentation/devicetree/bindings/media/atmel,isc.yaml
+++ b/Documentation/devicetree/bindings/media/atmel,isc.yaml
@@ -45,7 +45,7 @@ properties:
 
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
-    unevaluatedProperties: false
+    additionalProperties: false
     description:
       Input port node, single endpoint describing the input pad.
 
@@ -77,8 +77,6 @@ properties:
 
         additionalProperties: false
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
new file mode 100644
index 000000000000..5fb5d60f069a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/brcm,bcm2835-unicam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM283x Camera Interface (Unicam)
+
+maintainers:
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description: |-
+  The Unicam block on BCM283x SoCs is the receiver for either
+  CSI-2 or CCP2 data from image sensors or similar devices.
+
+  The main platform using this SoC is the Raspberry Pi family of boards.  On
+  the Pi the VideoCore firmware can also control this hardware block, and
+  driving it from two different processors will cause issues.  To avoid this,
+  the firmware checks the device tree configuration during boot. If it finds
+  device tree nodes whose name starts with 'csi' then it will stop the firmware
+  accessing the block, and it can then safely be used via the device tree
+  binding.
+
+properties:
+  compatible:
+    const: brcm,bcm2835-unicam
+
+  reg:
+    items:
+      - description: Unicam block.
+      - description: Clock Manager Image (CMI) block.
+
+  reg-names:
+    items:
+      - const: unicam
+      - const: cmi
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Clock to drive the LP state machine of Unicam.
+      - description: Clock for the VPU (core clock).
+
+  clock-names:
+    items:
+      - const: lp
+      - const: vpu
+
+  power-domains:
+    items:
+      - description: Unicam power domain
+
+  brcm,num-data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 2, 4 ]
+    description: |
+      Number of CSI-2 data lanes supported by this Unicam instance. The number
+      of data lanes actively used is specified with the data-lanes endpoint
+      property.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          bus-type:
+            enum: [ 3, 4 ]
+
+          clock-noncontinuous: true
+          data-lanes: true
+          remote-endpoint: true
+
+        required:
+          - bus-type
+          - data-lanes
+          - remote-endpoint
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - brcm,num-data-lanes
+  - port
+
+additionalProperties: False
+
+examples:
+  - |
+    #include <dt-bindings/clock/bcm2835.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/media/video-interfaces.h>
+    #include <dt-bindings/power/raspberrypi-power.h>
+
+    csi1: csi@7e801000 {
+        compatible = "brcm,bcm2835-unicam";
+        reg = <0x7e801000 0x800>,
+              <0x7e802004 0x4>;
+        reg-names = "unicam", "cmi";
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clocks BCM2835_CLOCK_CAM1>,
+                 <&firmware_clocks 4>;
+        clock-names = "lp", "vpu";
+        power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+        brcm,num-data-lanes = <2>;
+        port {
+                csi1_ep: endpoint {
+                        remote-endpoint = <&imx219_0>;
+                        bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                        data-lanes = <1 2>;
+                };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
deleted file mode 100644
index 6b02a0657ad9..000000000000
--- a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-Cadence MIPI-CSI2 RX controller
-===============================
-
-The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
-lanes in input, and 4 different pixel streams in output.
-
-Required properties:
-  - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible
-  - reg: base address and size of the memory mapped region
-  - clocks: phandles to the clocks driving the controller
-  - clock-names: must contain:
-    * sys_clk: main clock
-    * p_clk: register bank clock
-    * pixel_if[0-3]_clk: pixel stream output clock, one for each stream
-                         implemented in hardware, between 0 and 3
-
-Optional properties:
-  - phys: phandle to the external D-PHY, phy-names must be provided
-  - phy-names: must contain "dphy", if the implementation uses an
-               external D-PHY
-
-Required subnodes:
-  - ports: A ports node with one port child node per device input and output
-           port, in accordance with the video interface bindings defined in
-           Documentation/devicetree/bindings/media/video-interfaces.txt. The
-           port nodes are numbered as follows:
-
-           Port Description
-           -----------------------------
-           0    CSI-2 input
-           1    Stream 0 output
-           2    Stream 1 output
-           3    Stream 2 output
-           4    Stream 3 output
-
-           The stream output port nodes are optional if they are not
-           connected to anything at the hardware level or implemented
-           in the design.Since there is only one endpoint per port,
-           the endpoints are not numbered.
-
-
-Example:
-
-csi2rx: csi-bridge@0d060000 {
-	compatible = "cdns,csi2rx";
-	reg = <0x0d060000 0x1000>;
-	clocks = <&byteclock>, <&byteclock>
-		 <&coreclock>, <&coreclock>,
-		 <&coreclock>, <&coreclock>;
-	clock-names = "sys_clk", "p_clk",
-		      "pixel_if0_clk", "pixel_if1_clk",
-		      "pixel_if2_clk", "pixel_if3_clk";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			csi2rx_in_sensor: endpoint {
-				remote-endpoint = <&sensor_out_csi2rx>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			csi2rx_out_grabber0: endpoint {
-				remote-endpoint = <&grabber0_in_csi2rx>;
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			csi2rx_out_grabber1: endpoint {
-				remote-endpoint = <&grabber1_in_csi2rx>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			csi2rx_out_grabber2: endpoint {
-				remote-endpoint = <&grabber2_in_csi2rx>;
-			};
-		};
-
-		port@4 {
-			reg = <4>;
-
-			csi2rx_out_grabber3: endpoint {
-				remote-endpoint = <&grabber3_in_csi2rx>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
new file mode 100644
index 000000000000..6ed9a5621064
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml
@@ -0,0 +1,210 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MIPI-CSI2 RX controller
+
+maintainers:
+  - Maxime Ripard <mripard@kernel.org>
+
+description:
+  The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
+  lanes in input, and 4 different pixel streams in output.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - starfive,jh7110-csi2rx
+          - ti,j721e-csi2rx
+      - const: cdns,csi2rx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: error_irq
+      - const: irq
+
+  clocks:
+    items:
+      - description: CSI2Rx system clock
+      - description: Gated Register bank clock for APB interface
+      - description: pixel Clock for Stream interface 0
+      - description: pixel Clock for Stream interface 1
+      - description: pixel Clock for Stream interface 2
+      - description: pixel Clock for Stream interface 3
+
+  clock-names:
+    items:
+      - const: sys_clk
+      - const: p_clk
+      - const: pixel_if0_clk
+      - const: pixel_if1_clk
+      - const: pixel_if2_clk
+      - const: pixel_if3_clk
+
+  resets:
+    items:
+      - description: CSI2Rx system reset
+      - description: Gated Register bank reset for APB interface
+      - description: pixel reset for Stream interface 0
+      - description: pixel reset for Stream interface 1
+      - description: pixel reset for Stream interface 2
+      - description: pixel reset for Stream interface 3
+
+  reset-names:
+    items:
+      - const: sys
+      - const: reg_bank
+      - const: pixel_if0
+      - const: pixel_if1
+      - const: pixel_if2
+      - const: pixel_if3
+
+  phys:
+    maxItems: 1
+    description: MIPI D-PHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-type:
+                const: 4
+
+              clock-lanes:
+                const: 0
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Stream 0 Output port node
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Stream 1 Output port node
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Stream 2 Output port node
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Stream 3 Output port node
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    csi@d060000 {
+        compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx";
+        reg = <0x0d060000 0x1000>;
+        clocks = <&byteclock 7>, <&byteclock 6>,
+                 <&coreclock 8>, <&coreclock 9>,
+                 <&coreclock 10>, <&coreclock 11>;
+        clock-names = "sys_clk", "p_clk",
+                      "pixel_if0_clk", "pixel_if1_clk",
+                      "pixel_if2_clk", "pixel_if3_clk";
+        resets = <&bytereset 9>, <&bytereset 4>,
+                 <&corereset 5>, <&corereset 6>,
+                 <&corereset 7>, <&corereset 8>;
+        reset-names = "sys", "reg_bank",
+                      "pixel_if0", "pixel_if1",
+                      "pixel_if2", "pixel_if3";
+        phys = <&csi_phy>;
+        phy-names = "dphy";
+
+        ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    csi2rx_in_sensor: endpoint {
+                        remote-endpoint = <&sensor_out_csi2rx>;
+                        clock-lanes = <0>;
+                        data-lanes = <1 2>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    csi2rx_out_grabber0: endpoint {
+                        remote-endpoint = <&grabber0_in_csi2rx>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    csi2rx_out_grabber1: endpoint {
+                        remote-endpoint = <&grabber1_in_csi2rx>;
+                    };
+                };
+
+                port@3 {
+                    reg = <3>;
+
+                    csi2rx_out_grabber2: endpoint {
+                        remote-endpoint = <&grabber2_in_csi2rx>;
+                    };
+                };
+
+                port@4 {
+                    reg = <4>;
+
+                    csi2rx_out_grabber3: endpoint {
+                        remote-endpoint = <&grabber3_in_csi2rx>;
+                    };
+                };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt
deleted file mode 100644
index 47e8d73d32a3..000000000000
--- a/Documentation/devicetree/bindings/media/cec-gpio.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* HDMI CEC GPIO driver
-
-The HDMI CEC GPIO module supports CEC implementations where the CEC line
-is hooked up to a pull-up GPIO line and - optionally - the HPD line is
-hooked up to another GPIO line.
-
-Please note: the maximum voltage for the CEC line is 3.63V, for the HPD and
-5V lines it is 5.3V. So you may need some sort of level conversion circuitry
-when connecting them to a GPIO line.
-
-Required properties:
-  - compatible: value must be "cec-gpio".
-  - cec-gpios: gpio that the CEC line is connected to. The line should be
-    tagged as open drain.
-
-If the CEC line is associated with an HDMI receiver/transmitter, then the
-following property is also required:
-
-  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
-
-If the CEC line is not associated with an HDMI receiver/transmitter, then
-the following property is optional and can be used for debugging HPD changes:
-
-  - hpd-gpios: gpio that the HPD line is connected to.
-
-This property is optional and can be used for debugging changes on the 5V line:
-
-  - v5-gpios: gpio that the 5V line is connected to.
-
-Example for the Raspberry Pi 3 where the CEC line is connected to
-pin 26 aka BCM7 aka CE1 on the GPIO pin header, the HPD line is
-connected to pin 11 aka BCM17 and the 5V line is connected to pin
-15 aka BCM22 (some level shifter is needed for the HPD and 5V lines!):
-
-#include <dt-bindings/gpio/gpio.h>
-
-cec-gpio {
-	compatible = "cec-gpio";
-	cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-	v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/media/cec.txt b/Documentation/devicetree/bindings/media/cec.txt
deleted file mode 100644
index 22d7aae3d3d7..000000000000
--- a/Documentation/devicetree/bindings/media/cec.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Common bindings for HDMI CEC adapters
-
-- hdmi-phandle: phandle to the HDMI controller.
-
-- needs-hpd: if present the CEC support is only available when the HPD
-  is high. Some boards only let the CEC pin through if the HPD is high,
-  for example if there is a level converter that uses the HPD to power
-  up or down.
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
index d93aea6a0258..b1fab53418f9 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/amlogic,meson-gx-ao-cec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/cec/amlogic,meson-gx-ao-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson AO-CEC Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
@@ -33,11 +33,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  hdmi-phandle:
-    description: phandle to the HDMI controller
-    $ref: /schemas/types.yaml#/definitions/phandle
-
 allOf:
+  - $ref: cec-common.yaml#
   - if:
       properties:
         compatible:
@@ -81,7 +78,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/media/cec/cec-common.yaml b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
new file mode 100644
index 000000000000..6d5017d9bf55
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC Adapters Common Properties
+
+maintainers:
+  - Hans Verkuil <hverkuil@kernel.org>
+
+properties:
+  $nodename:
+    pattern: "^cec(@[0-9a-f]+|-[0-9]+)?$"
+
+  hdmi-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the HDMI controller.
+
+  needs-hpd:
+    type: boolean
+    description:
+      The CEC support is only available when the HPD is high. Some boards only
+      let the CEC pin through if the HPD is high, for example if there is a
+      level converter that uses the HPD to power up or down.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
new file mode 100644
index 000000000000..582c6c9cae48
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC GPIO
+
+maintainers:
+  - Hans Verkuil <hverkuil@kernel.org>
+
+description: |
+  The HDMI CEC GPIO module supports CEC implementations where the CEC line is
+  hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up
+  to another GPIO line.
+
+  Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and
+  5V lines it is 5.3V. So you may need some sort of level conversion
+  circuitry when connecting them to a GPIO line.
+
+properties:
+  compatible:
+    const: cec-gpio
+
+  cec-gpios:
+    maxItems: 1
+    description:
+      GPIO that the CEC line is connected to. The line should be tagged as open
+      drain.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      GPIO that the HPD line is connected to.  Used for debugging HPD changes
+      when the CEC line is not associated with an HDMI receiver/transmitter.
+
+  v5-gpios:
+    maxItems: 1
+    description:
+      GPIO that the 5V line is connected to.  Used for debugging changes on the
+      5V line.
+
+required:
+  - compatible
+  - cec-gpios
+
+allOf:
+  - $ref: cec-common.yaml#
+  - if:
+      required:
+        - hdmi-phandle
+    then:
+      properties:
+        hpd-gpios: false
+
+  - if:
+      required:
+        - hpd-gpios
+    then:
+      properties:
+        hdmi-phandle: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    cec {
+        compatible = "cec-gpio";
+        cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+        hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+        v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml b/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml
new file mode 100644
index 000000000000..6ef545b1d622
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/nvidia,tegra114-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDMI CEC
+
+maintainers:
+  - Hans Verkuil <hverkuil@kernel.org>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra114-cec
+          - nvidia,tegra124-cec
+          - nvidia,tegra210-cec
+      - items:
+          - enum:
+              - nvidia,tegra186-cec
+              - nvidia,tegra194-cec
+          - const: nvidia,tegra210-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@70015000 {
+        compatible = "nvidia,tegra124-cec";
+        reg = <0x70015000 0x00001000>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_CEC>;
+        clock-names = "cec";
+        hdmi-phandle = <&hdmi>;
+    };
diff --git a/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
new file mode 100644
index 000000000000..016c8a77c1a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/samsung,s5p-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 and Exynos HDMI CEC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s5p-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: hdmicec
+
+  interrupts:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - samsung,syscon-phandle
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@101b0000 {
+        compatible = "samsung,s5p-cec";
+        reg = <0x101B0000 0x200>;
+
+        clocks = <&clock CLK_HDMI_CEC>;
+        clock-names = "hdmicec";
+        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+        hdmi-phandle = <&hdmi>;
+        needs-hpd;
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_cec>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+    };
diff --git a/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
new file mode 100644
index 000000000000..aeddf16ed339
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/st,stih-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STIH4xx HDMI CEC
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: st,stih-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec-clk
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: cec-irq
+
+  resets:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - hdmi-phandle
+  - interrupts
+  - resets
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    cec@94a087c {
+        compatible = "st,stih-cec";
+        reg = <0x94a087c 0x64>;
+
+        clocks = <&clk_sysin>;
+        clock-names = "cec-clk";
+        hdmi-phandle = <&sti_hdmi>;
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "cec-irq";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_cec0_default>;
+        resets = <&softreset STIH407_LPM_SOFTRESET>;
+    };
diff --git a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
index 77144cc6f7db..1d930d9e10fd 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/st,stm32-cec.yaml#
+$id: http://devicetree.org/schemas/media/cec/st,stm32-cec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CEC bindings
+title: STMicroelectronics STM32 CEC
 
 maintainers:
   - Yannick Fertre <yannick.fertre@foss.st.com>
@@ -29,6 +29,10 @@ properties:
       - const: cec
       - const: hdmi-cec
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/media/cnm,wave521c.yaml b/Documentation/devicetree/bindings/media/cnm,wave521c.yaml
new file mode 100644
index 000000000000..6a11c1d11fb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cnm,wave521c.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cnm,wave521c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chips&Media Wave 5 Series multi-standard codec IP
+
+maintainers:
+  - Nas Chung <nas.chung@chipsnmedia.com>
+  - Jackson Lee <jackson.lee@chipsnmedia.com>
+
+description:
+  The Chips&Media WAVE codec IP is a multi format video encoder/decoder
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,j721s2-wave521c
+      - const: cnm,wave521c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: VCODEC clock
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The VPU uses the SRAM to store some of the reference data instead of
+      storing it on DMA memory. It is mainly used for the purpose of reducing
+      bandwidth.
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    vpu: video-codec@12345678 {
+        compatible = "ti,j721s2-wave521c", "cnm,wave521c";
+        reg = <0x12345678 0x1000>;
+        clocks = <&clks 42>;
+        interrupts = <42>;
+        sram = <&sram>;
+    };
diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml
index 36781ee4617f..c9d5adbc8c4a 100644
--- a/Documentation/devicetree/bindings/media/coda.yaml
+++ b/Documentation/devicetree/bindings/media/coda.yaml
@@ -65,7 +65,6 @@ properties:
   iram:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: phandle pointing to the SRAM device node
-    maxItems: 1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
deleted file mode 100644
index 0bf6fb7fbeab..000000000000
--- a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE)
-
-Required properties:
-
-- compatible	: should be one of:
-		  "samsung,exynos4212-fimc-lite" for Exynos4212/4412 SoCs,
-		  "samsung,exynos5250-fimc-lite" for Exynos5250 compatible
-		   devices;
-- reg		: physical base address and size of the device memory mapped
-		  registers;
-- interrupts	: should contain FIMC-LITE interrupt;
-- clocks	: FIMC LITE gate clock should be specified in this property.
-- clock-names	: should contain "flite" entry.
-
-Each FIMC device should have an alias in the aliases node, in the form of
-fimc-lite<n>, where <n> is an integer specifying the IP block instance.
diff --git a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
deleted file mode 100644
index ce9a22689e53..000000000000
--- a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Samsung S5P/Exynos SoC series JPEG codec
-
-Required properties:
-
-- compatible	: should be one of:
-		  "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg",
-		  "samsung,exynos3250-jpeg", "samsung,exynos5420-jpeg",
-		  "samsung,exynos5433-jpeg";
-- reg		: address and length of the JPEG codec IP register set;
-- interrupts	: specifies the JPEG codec IP interrupt;
-- clock-names   : should contain:
-		   - "jpeg" for the core gate clock,
-		   - "sclk" for the special clock (optional).
-- clocks	: should contain the clock specifier and clock ID list
-		  matching entries in the clock-names property; from
-		  the common clock bindings.
diff --git a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
deleted file mode 100644
index 32ced99d4244..000000000000
--- a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Exynos4x12 SoC series Imaging Subsystem (FIMC-IS)
-
-The FIMC-IS is a subsystem for processing image signal from an image sensor.
-The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
-processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
-and SPI bus controllers, PWM and ADC.
-
-fimc-is node
-------------
-
-Required properties:
-- compatible	: should be "samsung,exynos4212-fimc-is" for Exynos4212 and
-		  Exynos4412 SoCs;
-- reg		: physical base address and length of the registers set;
-- interrupts	: must contain two FIMC-IS interrupts, in order: ISP0, ISP1;
-- clocks	: list of clock specifiers, corresponding to entries in
-		  clock-names property;
-- clock-names	: must contain "ppmuispx", "ppmuispx", "lite0", "lite1"
-		  "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "gicisp",
-		  "pwm_isp", "mcuctl_isp", "uart", "ispdiv0", "ispdiv1",
-		  "mcuispdiv0", "mcuispdiv1", "aclk200", "div_aclk200",
-		  "aclk400mcuisp", "div_aclk400mcuisp" entries,
-		  matching entries in the clocks property.
-pmu subnode
------------
-
-Required properties:
- - reg : must contain PMU physical base address and size of the register set.
-
-The following are the FIMC-IS peripheral device nodes and can be specified
-either standalone or as the fimc-is node child nodes.
-
-i2c-isp (ISP I2C bus controller) nodes
-------------------------------------------
-
-Required properties:
-
-- compatible	: should be "samsung,exynos4212-i2c-isp" for Exynos4212 and
-		  Exynos4412 SoCs;
-- reg		: physical base address and length of the registers set;
-- clocks	: must contain gate clock specifier for this controller;
-- clock-names	: must contain "i2c_isp" entry.
-
-For the above nodes it is required to specify a pinctrl state named "default",
-according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
-
-Device tree nodes of the image sensors' controlled directly by the FIMC-IS
-firmware must be child nodes of their corresponding ISP I2C bus controller node.
-The data link of these image sensors must be specified using the common video
-interfaces bindings, defined in video-interfaces.txt.
diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
deleted file mode 100644
index 1872688fa408..000000000000
--- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Samsung Exynos5 G-Scaler device
-
-G-Scaler is used for scaling and color space conversion on Exynos5 SoCs.
-
-Required properties:
-- compatible: should be one of
-	      "samsung,exynos5250-gsc"
-	      "samsung,exynos5420-gsc"
-	      "samsung,exynos5433-gsc"
-	      "samsung,exynos5-gsc" (deprecated)
-- reg: should contain G-Scaler physical address location and length.
-- interrupts: should contain G-Scaler interrupt number
-
-Optional properties:
-- samsung,sysreg: handle to syscon used to control the system registers to
-  set writeback input and destination
-
-Example:
-
-gsc_0:  gsc@13e00000 {
-	compatible = "samsung,exynos5250-gsc";
-	reg = <0x13e00000 0x1000>;
-	interrupts = <0 85 0>;
-};
-
-Aliases:
-Each G-Scaler node should have a numbered alias in the aliases node,
-in the form of gscN, N = 0...3. G-Scaler driver uses these aliases
-to retrieve the device IDs using "of_alias_get_id()" call.
-
-Example:
-
-aliases {
-	gsc0 =&gsc_0;
-	gsc1 =&gsc_1;
-	gsc2 =&gsc_2;
-	gsc3 =&gsc_3;
-};
diff --git a/Documentation/devicetree/bindings/media/fsl,imx-capture-subsystem.yaml b/Documentation/devicetree/bindings/media/fsl,imx-capture-subsystem.yaml
new file mode 100644
index 000000000000..25e65a344a0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx-capture-subsystem.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx-capture-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Media Video Device
+
+description:
+  This is the media controller node for video capture support. It is a
+  virtual device that lists the camera serial interface nodes that the
+  media device will control
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx-capture-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should contain a list of phandles pointing to camera
+      sensor interface ports of IPU devices.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    capture-subsystem {
+        compatible = "fsl,imx-capture-subsystem";
+        ports = <&ipu1_csi0>, <&ipu1_csi1>;
+    };
diff --git a/Documentation/devicetree/bindings/media/fsl,imx6-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/fsl,imx6-mipi-csi2.yaml
new file mode 100644
index 000000000000..65255f576f26
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx6-mipi-csi2.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx6-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI CSI-2 Receiver core in the i.MX SoC
+
+description:
+  This is the device node for the MIPI CSI-2 Receiver core in the i.MX
+  SoC. This is a Synopsys Designware MIPI CSI-2 host controller core
+  combined with a D-PHY core mixed into the same register block. In
+  addition this device consists of an i.MX-specific "CSI2IPU gasket"
+  glue logic, also controlled from the same register block. The CSI2IPU
+  gasket demultiplexes the four virtual channel streams from the host
+  controller's 32-bit output image bus onto four 16-bit parallel busses
+  to the i.MX IPU CSIs.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: hsi_tx (the D-PHY clock)
+      - description: video_27m (D-PHY PLL reference clock)
+      - description: eim_podf;
+
+  clock-names:
+    items:
+      - const: dphy
+      - const: ref
+      - const: pix
+
+  interrupts:
+    items:
+      - description: CSI-2 ERR1 irq
+      - description: CSI-2 ERR2 irq
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Input port node, single endpoint describing the CSI-2 transmitter.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          clock-lanes:
+            const: 0
+
+          data-lanes:
+            minItems: 1
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+        required:
+          - data-lanes
+
+patternProperties:
+  '^port@[1-4]$':
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      ports 1 through 4 are output ports connecting with parallel bus sink
+      endpoint nodes and correspond to the four MIPI CSI-2 virtual channel
+      outputs.
+
+    properties:
+      endpoint@0:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+      endpoint@1:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    mipi@21dc000 {
+        compatible = "fsl,imx6-mipi-csi2";
+        reg = <0x021dc000 0x4000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clks IMX6QDL_CLK_HSI_TX>,
+                 <&clks IMX6QDL_CLK_VIDEO_27M>,
+                 <&clks IMX6QDL_CLK_EIM_PODF>;
+        clock-names = "dphy", "ref", "pix";
+
+        port@0 {
+            reg = <0>;
+
+            endpoint {
+                remote-endpoint = <&ov5640_to_mipi_csi2>;
+                clock-lanes = <0>;
+                data-lanes = <1 2>;
+            };
+        };
+
+        port@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            endpoint@0 {
+                reg = <0>;
+                remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+            };
+
+            endpoint@1 {
+                reg = <1>;
+                remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
new file mode 100644
index 000000000000..988a5b3a62bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx6q-vdoa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Video Data Order Adapter
+
+description:
+  The Video Data Order Adapter (VDOA) is present on the i.MX6q. Its sole purpose
+  is to reorder video data from the macroblock tiled order produced by the CODA
+  960 VPU to the conventional raster-scan order for scanout.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6q-vdoa
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    vdoa@21e4000 {
+        compatible = "fsl,imx6q-vdoa";
+        reg = <0x021e4000 0x4000>;
+        interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clks IMX6QDL_CLK_VDOA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml
new file mode 100644
index 000000000000..3f47744459aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx6ull-pxp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Pixel Pipeline
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Michael Tretter <m.tretter@pengutronix.de>
+
+description:
+  The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine
+  that supports scaling, colorspace conversion, alpha blending, rotation, and
+  pixel conversion via lookup table. Different versions are present on various
+  i.MX SoCs from i.MX23 to i.MX7.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx6ul-pxp
+          - fsl,imx6ull-pxp
+          - fsl,imx7d-pxp
+      - items:
+          - enum:
+              - fsl,imx6sll-pxp
+              - fsl,imx6sx-pxp
+          - const: fsl,imx6ull-pxp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: axi
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sx-pxp
+              - fsl,imx6ul-pxp
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+    else:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6ul-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pxp: pxp@21cc000 {
+        compatible = "fsl,imx6ull-pxp";
+        reg = <0x021cc000 0x4000>;
+        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "axi";
+        clocks = <&clks IMX6UL_CLK_PXP>;
+    };
diff --git a/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml b/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml
new file mode 100644
index 000000000000..93f527e223af
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx8qm-isi.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx8qm-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QM Image Sensing Interface
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Image Sensing Interface (ISI) combines image processing pipelines with
+  DMA engines to process and capture frames originating from a variety of
+  sources. The inputs to the ISI go through Pixel Link interfaces, and their
+  number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+  CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-isi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: per0
+      - const: per1
+      - const: per2
+      - const: per3
+      - const: per4
+      - const: per5
+      - const: per6
+      - const: per7
+
+  interrupts:
+    maxItems: 8
+
+  power-domains:
+    maxItems: 8
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 RX 0
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 RX 1
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI RX
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8-clock.h>
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    image-controller@58100000 {
+        compatible = "fsl,imx8qm-isi";
+        reg = <0x58100000 0x80000>;
+        interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma5_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma6_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma7_lpcg IMX_LPCG_CLK_0>;
+        clock-names = "per0", "per1", "per2", "per3",
+                      "per4", "per5", "per6", "per7";
+        power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH1>,
+                        <&pd IMX_SC_R_ISI_CH2>, <&pd IMX_SC_R_ISI_CH3>,
+                        <&pd IMX_SC_R_ISI_CH4>, <&pd IMX_SC_R_ISI_CH5>,
+                        <&pd IMX_SC_R_ISI_CH6>, <&pd IMX_SC_R_ISI_CH7>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&mipi_csi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml b/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml
new file mode 100644
index 000000000000..bb41996bd2e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx8qxp-isi.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx8qxp-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8QXP Image Sensing Interface
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The Image Sensing Interface (ISI) combines image processing pipelines with
+  DMA engines to process and capture frames originating from a variety of
+  sources. The inputs to the ISI go through Pixel Link interfaces, and their
+  number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+  CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-isi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: per0
+      - const: per1
+      - const: per2
+      - const: per3
+      - const: per4
+      - const: per5
+
+  interrupts:
+    maxItems: 6
+
+  power-domains:
+    maxItems: 6
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 RX 0
+      port@6:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CSI-2 Parallel RX
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8-clock.h>
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    image-controller@58100000 {
+        compatible = "fsl,imx8qxp-isi";
+        reg = <0x58100000 0x60000>;
+        interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&pdma0_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma1_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma2_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma3_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma4_lpcg IMX_LPCG_CLK_0>,
+                 <&pdma5_lpcg IMX_LPCG_CLK_0>;
+        clock-names = "per0", "per1", "per2", "per3", "per4", "per5";
+        power-domains = <&pd IMX_SC_R_ISI_CH0>, <&pd IMX_SC_R_ISI_CH1>,
+                        <&pd IMX_SC_R_ISI_CH2>, <&pd IMX_SC_R_ISI_CH3>,
+                        <&pd IMX_SC_R_ISI_CH4>, <&pd IMX_SC_R_ISI_CH5>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&mipi_csi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/fsl-pxp.txt b/Documentation/devicetree/bindings/media/fsl-pxp.txt
deleted file mode 100644
index f8090e06530d..000000000000
--- a/Documentation/devicetree/bindings/media/fsl-pxp.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Freescale Pixel Pipeline
-========================
-
-The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine
-that supports scaling, colorspace conversion, alpha blending, rotation, and
-pixel conversion via lookup table. Different versions are present on various
-i.MX SoCs from i.MX23 to i.MX7.
-
-Required properties:
-- compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28,
-  imx6dl, imx6sl, imx6sll, imx6ul, imx6sx, imx6ull, or imx7d.
-- reg: the register base and size for the device registers
-- interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d.
-- clock-names: should be "axi"
-- clocks: the PXP AXI clock
-
-Example:
-
-pxp@21cc000 {
-	compatible = "fsl,imx6ull-pxp";
-	reg = <0x021cc000 0x4000>;
-	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "axi";
-	clocks = <&clks IMX6UL_CLK_PXP>;
-};
diff --git a/Documentation/devicetree/bindings/media/fsl-vdoa.txt b/Documentation/devicetree/bindings/media/fsl-vdoa.txt
deleted file mode 100644
index 6c5628530bb7..000000000000
--- a/Documentation/devicetree/bindings/media/fsl-vdoa.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Freescale Video Data Order Adapter
-==================================
-
-The Video Data Order Adapter (VDOA) is present on the i.MX6q. Its sole purpose
-is to reorder video data from the macroblock tiled order produced by the CODA
-960 VPU to the conventional raster-scan order for scanout.
-
-Required properties:
-- compatible: must be "fsl,imx6q-vdoa"
-- reg: the register base and size for the device registers
-- interrupts: the VDOA interrupt
-- clocks: the vdoa clock
-
-Example:
-
-vdoa@21e4000 {
-        compatible = "fsl,imx6q-vdoa";
-        reg = <0x021e4000 0x4000>;
-        interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&clks IMX6QDL_CLK_VDOA>;
-};
diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
deleted file mode 100644
index 108bf435b933..000000000000
--- a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Device-Tree bindings for GPIO IR receiver
-
-Required properties:
-	- compatible: should be "gpio-ir-receiver".
-	- gpios: specifies GPIO used for IR signal reception.
-
-Optional properties:
-	- linux,rc-map-name: see rc.txt file in the same
-	  directory.
-	- linux,autosuspend-period: autosuspend delay time,
-	  the unit is milisecond.
-
-Example node:
-
-	ir: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 19 1>;
-		linux,rc-map-name = "rc-rc6-mce";
-		linux,autosuspend-period = <125>;
-	};
diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
new file mode 100644
index 000000000000..008c007ed702
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/gpio-ir-receiver.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO Based IR receiver
+
+maintainers:
+  - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    const: gpio-ir-receiver
+
+  gpios:
+    maxItems: 1
+
+  linux,autosuspend-period:
+    description: autosuspend delay time in milliseconds
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  wakeup-source:
+    description: IR receiver can wake-up the system.
+
+required:
+  - compatible
+  - gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ir-receiver {
+        compatible = "gpio-ir-receiver";
+        gpios = <&gpio0 19 1>;
+        linux,rc-map-name = "rc-rc6-mce";
+        linux,autosuspend-period = <125>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ad5820.txt b/Documentation/devicetree/bindings/media/i2c/ad5820.txt
deleted file mode 100644
index 5764cbedf9b7..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ad5820.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Analog Devices AD5820 autofocus coil
-
-Required Properties:
-
-  - compatible: Must contain one of:
-		- "adi,ad5820"
-		- "adi,ad5821"
-		- "adi,ad5823"
-
-  - reg: I2C slave address
-
-  - VANA-supply: supply of voltage for VANA pin
-
-Optional properties:
-
-   - enable-gpios : GPIO spec for the XSHUTDOWN pin. The XSHUTDOWN signal is
-active low, a high level on the pin enables the device.
-
-Example:
-
-       ad5820: coil@c {
-               compatible = "adi,ad5820";
-               reg = <0x0c>;
-
-               VANA-supply = <&vaux4>;
-               enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
-       };
-
diff --git a/Documentation/devicetree/bindings/media/i2c/adi,ad5820.yaml b/Documentation/devicetree/bindings/media/i2c/adi,ad5820.yaml
new file mode 100644
index 000000000000..0c8f24f692ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adi,ad5820.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adi,ad5820.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD5820 autofocus coil
+
+maintainers:
+  - Pavel Machek <pavel@ucw.cz>
+
+description:
+  The AD5820 is a current sink driver designed for precise control of
+  voice coil motors (VCMs) in camera autofocus systems.
+
+properties:
+  compatible:
+    enum:
+      - adi,ad5820
+      - adi,ad5821
+      - adi,ad5823
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      GPIO spec for the XSHUTDOWN pin. The XSHUTDOWN signal is active low,
+      a high level on the pin enables the device.
+
+  VANA-supply:
+    description: supply of voltage for VANA pin
+
+required:
+  - compatible
+  - reg
+  - VANA-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        coil@c {
+            compatible = "adi,ad5820";
+            reg = <0x0c>;
+
+            enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
+            VANA-supply = <&vaux4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/Documentation/devicetree/bindings/media/i2c/adi,adp1653.txt
index 4cce0de40ee9..4cce0de40ee9 100644
--- a/Documentation/devicetree/bindings/media/i2c/adp1653.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adp1653.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/adi,adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adi,adv7180.yaml
new file mode 100644
index 000000000000..dee8ce7cb7ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adv7180.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adi,adv7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7180 analog video decoder family
+
+maintainers:
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+description:
+  The adv7180 family devices are used to capture analog video to different
+  digital interfaces like MIPI CSI-2 or parallel video.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adi,adv7180
+          - adi,adv7180cp
+          - adi,adv7180st
+          - adi,adv7182
+          - adi,adv7280
+          - adi,adv7280-m
+          - adi,adv7281
+          - adi,adv7281-m
+          - adi,adv7281-ma
+          - adi,adv7282
+          - adi,adv7282-m
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  adv,force-bt656-4:
+    deprecated: true
+    description:
+      Indicates that the output is a BT.656-4 compatible stream.
+    type: boolean
+
+  adi,force-bt656-4:
+    description:
+      Indicates that the output is a BT.656-4 compatible stream.
+    type: boolean
+
+  interrupts:
+    items:
+      - description: The GPIO connected to the INTRQ pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+  ports: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - adi,adv7180
+            - adi,adv7182
+            - adi,adv7280
+            - adi,adv7280-m
+            - adi,adv7281
+            - adi,adv7281-m
+            - adi,adv7281-ma
+            - adi,adv7282
+            - adi,adv7282-m
+    then:
+      required:
+        - port
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7180cp
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@3:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          patternProperties:
+            "^port@[0-2]$":
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+          required:
+            - port@3
+
+      required:
+        - ports
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7180st
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@6:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          patternProperties:
+            "^port@[0-5]$":
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+          required:
+            - port@6
+
+      required:
+        - ports
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            composite-in@20 {
+                    compatible = "adi,adv7180";
+                    reg = <0x20>;
+
+                    port {
+                            adv7180: endpoint {
+                                    bus-width = <8>;
+                                    remote-endpoint = <&vin1ep>;
+                            };
+                    };
+            };
+
+    };
+
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            composite-in@20 {
+                    compatible = "adi,adv7180cp";
+                    reg = <0x20>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                                    adv7180_in: endpoint {
+                                            remote-endpoint = <&composite_con_in>;
+                                    };
+                            };
+
+                            port@3 {
+                                    reg = <3>;
+                                    adv7180_out: endpoint {
+                                            remote-endpoint = <&vin4_in>;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7343.txt b/Documentation/devicetree/bindings/media/i2c/adi,adv7343.txt
index 5653bc2428b8..5653bc2428b8 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7343.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adv7343.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/adi,adv748x.yaml b/Documentation/devicetree/bindings/media/i2c/adi,adv748x.yaml
new file mode 100644
index 000000000000..254987350321
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adv748x.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adi,adv748x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV748X video decoder with HDMI receiver
+
+maintainers:
+  - Kieran Bingham <kieran.bingham@ideasonboard.com>
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The ADV7481 and ADV7482 are multi format video decoders with an integrated
+  HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
+  from three input sources HDMI, analog and TTL.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adi,adv7481
+          - adi,adv7482
+
+  reg:
+    minItems: 1
+    maxItems: 12
+    description:
+      The ADV748x has up to twelve 256-byte maps that can be accessed via the
+      main I2C ports. Each map has it own I2C address and acts as a standard
+      slave device on the I2C bus. The main address is mandatory, others are
+      optional and remain at default values if not specified.
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: main
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+
+  interrupts: true
+
+  interrupt-names: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      "^port@[0-7]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port nodes for analog inputs AIN[0-7].
+
+    properties:
+      port@8:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port node for HDMI.
+
+      port@9:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port node for TTL.
+
+      port@a:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the CSI-2 transmitter TXA.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@b:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the CSI-2 transmitter TXB.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                maxItems: 1
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7481
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 1
+          maxItems: 3
+          items:
+            enum: [ intrq1, intrq2, intrq3 ]
+    else:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 1
+          maxItems: 2
+          items:
+            enum: [ intrq1, intrq2 ]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        video-receiver@70 {
+            compatible = "adi,adv7482";
+            reg = <0x70 0x71 0x72 0x73 0x74 0x75
+                   0x60 0x61 0x62 0x63 0x64 0x65>;
+            reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+                        "infoframe", "cbus", "cec", "sdp", "txa", "txb";
+
+            interrupt-parent = <&gpio6>;
+            interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "intrq1", "intrq2";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@7 {
+                    reg = <7>;
+
+                    adv7482_ain7: endpoint {
+                        remote-endpoint = <&cvbs_in>;
+                    };
+                };
+
+                port@8 {
+                    reg = <8>;
+
+                    adv7482_hdmi: endpoint {
+                        remote-endpoint = <&hdmi_in>;
+                    };
+                };
+
+                port@a {
+                    reg = <10>;
+
+                    adv7482_txa: endpoint {
+                        clock-lanes = <0>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
+                };
+
+                port@b {
+                    reg = <11>;
+
+                    adv7482_txb: endpoint {
+                        clock-lanes = <0>;
+                        data-lanes = <1>;
+                        remote-endpoint = <&csi20_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
new file mode 100644
index 000000000000..f8d9889dbc21
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adi,adv7604.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV7604/10/11/12 video decoder with HDMI receiver
+
+maintainers:
+  - Hans Verkuil <hverkuil@kernel.org>
+
+description:
+  The ADV7604 and ADV7610/11/12 are multiformat video decoders with
+  an integrated HDMI receiver. The ADV7604 has four multiplexed HDMI inputs
+  and one analog input, and the ADV7610/11 have one HDMI input and no analog
+  input. The ADV7612 is similar to the ADV7610/11 but has 2 HDMI inputs.
+
+  These device tree bindings support the ADV7610/11/12 only at the moment.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adi,adv7610
+          - adi,adv7611
+          - adi,adv7612
+
+  reg:
+    minItems: 1
+    maxItems: 13
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: main
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  hpd-gpios:
+    minItems: 1
+    description:
+      References to the GPIOs that control the HDMI hot-plug detection pins,
+      one per HDMI input. The active flag indicates the GPIO level that
+      enables hot-plug detection.
+
+  default-input:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+    description:
+      Select which input is selected after reset.
+
+  ports: true
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7611
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@0:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+            port@1:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          required:
+            - port@1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7612
+    then:
+      properties:
+        ports:
+          $ref: /schemas/graph.yaml#/properties/ports
+          properties:
+            port@2:
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Output port
+
+          patternProperties:
+            "^port@[0-1]$":
+              $ref: /schemas/graph.yaml#/properties/port
+              description: Input port
+
+          required:
+            - port@2
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            hdmi_receiver@4c {
+                    compatible = "adi,adv7611";
+                    /*
+                     * The edid page will be accessible @ 0x66 on the I2C bus. All
+                     * other maps will retain their default addresses.
+                     */
+                    reg = <0x4c>, <0x66>;
+                    reg-names = "main", "edid";
+
+                    reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
+                    hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
+                    default-input = <0>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                            };
+
+                            port@1 {
+                                    reg = <1>;
+                                    hdmi_in: endpoint {
+                                            remote-endpoint = <&ccdc_in>;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml b/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
deleted file mode 100644
index c8d887eee3bb..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/adv7180.yaml
+++ /dev/null
@@ -1,179 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/media/i2c/adv7180.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Analog Devices ADV7180 analog video decoder family
-
-maintainers:
-  - Lars-Peter Clausen <lars@metafoo.de>
-
-description:
-  The adv7180 family devices are used to capture analog video to different
-  digital interfaces like MIPI CSI-2 or parallel video.
-
-properties:
-  compatible:
-    items:
-      - enum:
-          - adi,adv7180
-          - adi,adv7180cp
-          - adi,adv7180st
-          - adi,adv7182
-          - adi,adv7280
-          - adi,adv7280-m
-          - adi,adv7281
-          - adi,adv7281-m
-          - adi,adv7281-ma
-          - adi,adv7282
-          - adi,adv7282-m
-
-  reg:
-    maxItems: 1
-
-  powerdown-gpios:
-    maxItems: 1
-
-  reset-gpios:
-    maxItems: 1
-
-  adv,force-bt656-4:
-    description:
-      Indicates that the output is a BT.656-4 compatible stream.
-    type: boolean
-
-  port:
-    $ref: /schemas/graph.yaml#/$defs/port-base
-    unevaluatedProperties: false
-
-    properties:
-      endpoint:
-        $ref: /schemas/media/video-interfaces.yaml#
-        unevaluatedProperties: false
-
-  ports: true
-
-additionalProperties: false
-
-required:
-  - compatible
-  - reg
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          enum:
-            - adi,adv7180
-            - adi,adv7182
-            - adi,adv7280
-            - adi,adv7280-m
-            - adi,adv7281
-            - adi,adv7281-m
-            - adi,adv7281-ma
-            - adi,adv7282
-            - adi,adv7282-m
-    then:
-      required:
-        - port
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: adi,adv7180cp
-    then:
-      properties:
-        ports:
-          $ref: /schemas/graph.yaml#/properties/ports
-          properties:
-            port@3:
-              $ref: /schemas/graph.yaml#/properties/port
-              description: Output port
-
-          patternProperties:
-            "^port@[0-2]$":
-              $ref: /schemas/graph.yaml#/properties/port
-              description: Input port
-
-          required:
-            - port@3
-
-      required:
-        - ports
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: adi,adv7180st
-    then:
-      properties:
-        ports:
-          $ref: /schemas/graph.yaml#/properties/ports
-          properties:
-            port@6:
-              $ref: /schemas/graph.yaml#/properties/port
-              description: Output port
-
-          patternProperties:
-            "^port@[0-5]$":
-              $ref: /schemas/graph.yaml#/properties/port
-              description: Input port
-
-          required:
-            - port@6
-
-      required:
-        - ports
-
-examples:
-  - |
-    i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            composite-in@20 {
-                    compatible = "adi,adv7180";
-                    reg = <0x20>;
-
-                    port {
-                            adv7180: endpoint {
-                                    bus-width = <8>;
-                                    remote-endpoint = <&vin1ep>;
-                            };
-                    };
-            };
-
-    };
-
-  - |
-    i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            composite-in@20 {
-                    compatible = "adi,adv7180cp";
-                    reg = <0x20>;
-
-                    ports {
-                            #address-cells = <1>;
-                            #size-cells = <0>;
-
-                            port@0 {
-                                    reg = <0>;
-                                    adv7180_in: endpoint {
-                                            remote-endpoint = <&composite_con_in>;
-                                    };
-                            };
-
-                            port@3 {
-                                    reg = <3>;
-                                    adv7180_out: endpoint {
-                                            remote-endpoint = <&vin4_in>;
-                                    };
-                            };
-                    };
-            };
-    };
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
deleted file mode 100644
index 4f91686e54a6..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-* Analog Devices ADV748X video decoder with HDMI receiver
-
-The ADV7481 and ADV7482 are multi format video decoders with an integrated
-HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
-from three input sources HDMI, analog and TTL.
-
-Required Properties:
-
-  - compatible: Must contain one of the following
-    - "adi,adv7481" for the ADV7481
-    - "adi,adv7482" for the ADV7482
-
-  - reg: I2C slave addresses
-    The ADV748x has up to twelve 256-byte maps that can be accessed via the
-    main I2C ports. Each map has it own I2C address and acts as a standard
-    slave device on the I2C bus. The main address is mandatory, others are
-    optional and remain at default values if not specified.
-
-Optional Properties:
-
-  - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or
-		     "intrq3". All interrupts are optional. The "intrq3" interrupt
-		     is only available on the adv7481
-  - interrupts: Specify the interrupt lines for the ADV748x
-  - reg-names : Names of maps with programmable addresses.
-		It shall contain all maps needing a non-default address.
-		Possible map names are:
-		  "main", "dpll", "cp", "hdmi", "edid", "repeater",
-		  "infoframe", "cbus", "cec", "sdp", "txa", "txb"
-
-The device node must contain one 'port' child node per device input and output
-port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
-are numbered as follows.
-
-	  Name		Type		Port
-	---------------------------------------
-	  AIN0		sink		0
-	  AIN1		sink		1
-	  AIN2		sink		2
-	  AIN3		sink		3
-	  AIN4		sink		4
-	  AIN5		sink		5
-	  AIN6		sink		6
-	  AIN7		sink		7
-	  HDMI		sink		8
-	  TTL		sink		9
-	  TXA		source		10
-	  TXB		source		11
-
-The digital output port nodes, when present, shall contain at least one
-endpoint. Each of those endpoints shall contain the data-lanes property as
-described in video-interfaces.txt.
-
-Required source endpoint properties:
-  - data-lanes: an array of physical data lane indexes
-    The accepted value(s) for this property depends on which of the two
-    sources are described. For TXA 1, 2 or 4 data lanes can be described
-    while for TXB only 1 data lane is valid. See video-interfaces.txt
-    for detailed description.
-
-Ports are optional if they are not connected to anything at the hardware level.
-
-Example:
-
-	video-receiver@70 {
-		compatible = "adi,adv7482";
-		reg = <0x70 0x71 0x72 0x73 0x74 0x75
-		       0x60 0x61 0x62 0x63 0x64 0x65>;
-		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
-			    "infoframe", "cbus", "cec", "sdp", "txa", "txb";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gpio6>;
-		interrupt-names = "intrq1", "intrq2";
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
-			     <31 IRQ_TYPE_LEVEL_LOW>;
-
-		port@7 {
-			reg = <7>;
-
-			adv7482_ain7: endpoint {
-				remote-endpoint = <&cvbs_in>;
-			};
-		};
-
-		port@8 {
-			reg = <8>;
-
-			adv7482_hdmi: endpoint {
-				remote-endpoint = <&hdmi_in>;
-			};
-		};
-
-		port@a {
-			reg = <10>;
-
-			adv7482_txa: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1 2 3 4>;
-				remote-endpoint = <&csi40_in>;
-			};
-		};
-
-		port@b {
-			reg = <11>;
-
-			adv7482_txb: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1>;
-				remote-endpoint = <&csi20_in>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
deleted file mode 100644
index c19d8391e2d5..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
+++ /dev/null
@@ -1,159 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/media/i2c/adv7604.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Analog Devices ADV7604/10/11/12 video decoder with HDMI receiver
-
-maintainers:
-  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
-description:
-  The ADV7604 and ADV7610/11/12 are multiformat video decoders with
-  an integrated HDMI receiver. The ADV7604 has four multiplexed HDMI inputs
-  and one analog input, and the ADV7610/11 have one HDMI input and no analog
-  input. The ADV7612 is similar to the ADV7610/11 but has 2 HDMI inputs.
-
-  These device tree bindings support the ADV7610/11/12 only at the moment.
-
-properties:
-  compatible:
-    items:
-      - enum:
-          - adi,adv7610
-          - adi,adv7611
-          - adi,adv7612
-
-  reg:
-    minItems: 1
-    maxItems: 13
-
-  reg-names:
-    minItems: 1
-    items:
-      - const: main
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-      - enum: [ avlink, cec, infoframe, esdp, dpp, afe, rep, edid, hdmi, test, cp, vdp ]
-
-  interrupts:
-    maxItems: 1
-
-  reset-gpios:
-    maxItems: 1
-
-  hpd-gpios:
-    minItems: 1
-    description:
-      References to the GPIOs that control the HDMI hot-plug detection pins,
-      one per HDMI input. The active flag indicates the GPIO level that
-      enables hot-plug detection.
-
-  default-input:
-    maxItems: 1
-    description:
-      Select which input is selected after reset.
-
-  ports: true
-
-required:
-  - compatible
-  - reg
-  - ports
-
-additionalProperties: false
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: adi,adv7611
-    then:
-      properties:
-        ports:
-          $ref: /schemas/graph.yaml#/properties/ports
-          properties:
-            port@0:
-              $ref: /schemas/graph.yaml#/properties/port
-              description: Input port
-
-            port@1:
-              $ref: /schemas/graph.yaml#/properties/port
-              description: Output port
-
-          required:
-            - port@1
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: adi,adv7612
-    then:
-      properties:
-        ports:
-          $ref: /schemas/graph.yaml#/properties/ports
-          properties:
-            port@2:
-              $ref: /schemas/graph.yaml#/properties/port
-              description: Output port
-
-          patternProperties:
-            "^port@[0-1]$":
-              $ref: /schemas/graph.yaml#/properties/port
-              description: Input port
-
-          required:
-            - port@2
-
-examples:
-  - |
-    #include <dt-bindings/gpio/gpio.h>
-
-    i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            hdmi_receiver@4c {
-                    compatible = "adi,adv7611";
-                    /*
-                     * The edid page will be accessible @ 0x66 on the I2C bus. All
-                     * other maps will retain their default addresses.
-                     */
-                    reg = <0x4c>, <0x66>;
-                    reg-names = "main", "edid";
-
-                    reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
-                    hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
-                    default-input = <0>;
-
-                    ports {
-                            #address-cells = <1>;
-                            #size-cells = <0>;
-
-                            port@0 {
-                                    reg = <0>;
-                            };
-
-                            port@1 {
-                                    reg = <1>;
-                                    hdmi_in: endpoint {
-                                            remote-endpoint = <&ccdc_in>;
-                                    };
-                            };
-                    };
-
-
-            };
-    };
diff --git a/Documentation/devicetree/bindings/media/i2c/ak7375.txt b/Documentation/devicetree/bindings/media/i2c/ak7375.txt
deleted file mode 100644
index aa3e24b41241..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ak7375.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Asahi Kasei Microdevices AK7375 voice coil lens driver
-
-AK7375 is a camera voice coil lens.
-
-Mandatory properties:
-
-- compatible: "asahi-kasei,ak7375"
-- reg: I2C slave address
diff --git a/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml
new file mode 100644
index 000000000000..d3329e991d16
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/alliedvision,alvium-csi2.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/alliedvision,alvium-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allied Vision Alvium Camera
+
+maintainers:
+  - Tommaso Merciai <tomm.merciai@gmail.com>
+  - Martin Hecht <martin.hecht@avnet.eu>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: alliedvision,alvium-csi2
+
+  reg:
+    maxItems: 1
+
+  vcc-ext-in-supply:
+    description: |
+      The regulator that supplies power to the VCC_EXT_IN pins.
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - vcc-ext-in-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        alvium: camera@3c {
+            compatible = "alliedvision,alvium-csi2";
+            reg = <0x3c>;
+            vcc-ext-in-supply = <&reg_vcc_ext_in>;
+
+            port {
+                alvium_out: endpoint {
+                    remote-endpoint = <&mipi_csi_0_in>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <681250000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
index c2ba78116dbb..be00de2f2d58 100644
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -17,6 +17,7 @@ description: |
 properties:
   compatible:
     enum:
+      - aptina,mt9p006
       - aptina,mt9p031
       - aptina,mt9p031m
 
@@ -81,7 +82,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9v032.txt b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v032.txt
index 100f0ae43269..100f0ae43269 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9v032.txt
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v032.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
index e53b8d65f381..088022f88010 100644
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
@@ -55,7 +55,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml b/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
new file mode 100644
index 000000000000..fe312cc6a873
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/asahi-kasei,ak7375.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asahi Kasei Microdevices AK7375 voice coil lens actuator
+
+maintainers:
+  - Tianshu Qiu <tian.shu.qiu@intel.com>
+
+description:
+  AK7375 is a voice coil motor (VCM) camera lens actuator that
+  is controlled over I2C.
+
+properties:
+  compatible:
+    enum:
+      - asahi-kasei,ak7345
+      - asahi-kasei,ak7375
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD supply
+
+  vio-supply:
+    description: I/O pull-up supply
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ak7375: camera-lens@c {
+            compatible = "asahi-kasei,ak7375";
+            reg = <0x0c>;
+
+            vdd-supply = <&vreg_l23a_2p8>;
+            vio-supply = <&vreg_lvs1a_1p8>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
index 63e5b89d2e0b..4e69b6a7ffcc 100644
--- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Chrontel HDMI-CEC Controller
 
@@ -13,6 +13,9 @@ description:
   The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
   programmable through I2C and drives a single CEC line.
 
+allOf:
+  - $ref: /schemas/media/cec/cec-common.yaml#
+
 properties:
   compatible:
     const: chrontel,ch7322
@@ -40,16 +43,12 @@ properties:
       if in auto mode.
     maxItems: 1
 
-  # see ../cec.txt
-  hdmi-phandle:
-    description: phandle to the HDMI controller
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -58,7 +57,7 @@ examples:
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
-      ch7322@75 {
+      cec@75 {
         compatible = "chrontel,ch7322";
         reg = <0x75>;
         interrupts = <47 IRQ_TYPE_EDGE_RISING>;
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
deleted file mode 100644
index b88dcdd41def..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Dongwoon Anatech DW9714 camera voice coil lens driver
-
-DW9174 is a 10-bit DAC with current sink capability. It is intended
-for driving voice coil lenses in camera modules.
-
-Mandatory properties:
-
-- compatible: "dongwoon,dw9714"
-- reg: I²C slave address
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
new file mode 100644
index 000000000000..66229a3dc05d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9714 camera voice coil lens driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  DW9174 is a 10-bit DAC with current sink capability. It is intended for
+  driving voice coil lenses in camera modules.
+
+properties:
+  compatible:
+    const: dongwoon,dw9714
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      XSD pin for shutdown (active low)
+
+  vcc-supply:
+    description: VDD power supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-lens@c {
+            compatible = "dongwoon,dw9714";
+            reg = <0x0c>;
+            vcc-supply = <&reg_csi_1v8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9719.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9719.yaml
new file mode 100644
index 000000000000..8e8d62436e0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9719.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9719.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9719 Voice Coil Motor (VCM) Controller
+
+maintainers:
+  - André Apitzsch <git@apitzsch.eu>
+
+description:
+  The Dongwoon DW9718S/9719/9761 is a single 10-bit digital-to-analog converter
+  with 100 mA output current sink capability, designed for linear control of
+  voice coil motors (VCM) in camera lenses. This chip provides a Smart Actuator
+  Control (SAC) mode intended for driving voice coil lenses in camera modules.
+
+properties:
+  compatible:
+    enum:
+      - dongwoon,dw9718s
+      - dongwoon,dw9719
+      - dongwoon,dw9761
+      - dongwoon,dw9800k
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD power supply
+
+  dongwoon,sac-mode:
+    description: |
+      Slew Rate Control mode to use: direct, LSC (Linear Slope Control) or
+      SAC1-SAC6 (Smart Actuator Control).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0   # Direct mode
+      - 1   # LSC mode
+      - 2   # SAC1 mode (operation time# 0.32 x Tvib)
+      - 3   # SAC2 mode (operation time# 0.48 x Tvib)
+      - 4   # SAC3 mode (operation time# 0.72 x Tvib)
+      - 5   # SAC4 mode (operation time# 1.20 x Tvib)
+      - 6   # SAC5 mode (operation time# 1.64 x Tvib)
+      - 7   # SAC6 mode (operation time# 1.88 x Tvib)
+    default: 4
+
+  dongwoon,vcm-prescale:
+    description:
+      Indication of VCM switching frequency dividing rate select.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: dongwoon,dw9718s
+    then:
+      properties:
+        dongwoon,vcm-prescale:
+          description:
+            The final frequency is 10 MHz divided by (value + 2).
+          maximum: 15
+          default: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        actuator@c {
+            compatible = "dongwoon,dw9718s";
+            reg = <0x0c>;
+
+            vdd-supply = <&pm8937_l17>;
+
+            dongwoon,sac-mode = <4>;
+            dongwoon,vcm-prescale = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
index 21864ab86ec4..a0855d3b7577 100644
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9768.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dongwoon Anatech DW9768 Voice Coil Motor (VCM) Lens Device Tree Bindings
+title: Dongwoon Anatech DW9768 Voice Coil Motor (VCM) Lens
 
 maintainers:
   - Dongchun Zhu <dongchun.zhu@mediatek.com>
@@ -38,7 +38,7 @@ properties:
   dongwoon,aac-mode:
     description:
       Indication of AAC mode select.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum:
       - 1    #  AAC2 mode(operation time# 0.48 x Tvib)
       - 2    #  AAC3 mode(operation time# 0.70 x Tvib)
@@ -50,7 +50,7 @@ properties:
     description:
       Number of AAC Timing count that controlled by one 6-bit period of
       vibration register AACT[5:0], the unit of which is 100 us.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 0x20
     minimum: 0x00
     maximum: 0x3f
@@ -59,7 +59,7 @@ properties:
     description:
       Indication of VCM internal clock dividing rate select, as one multiple
       factor to calculate VCM ring periodic time Tvib.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum:
       - 0    #  Dividing Rate -  2
       - 1    #  Dividing Rate -  1
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
deleted file mode 100644
index c4701f1eaaf6..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Dongwoon Anatech DW9807 voice coil lens driver
-
-DW9807 is a 10-bit DAC with current sink capability. It is intended for
-controlling voice coil lenses.
-
-Mandatory properties:
-
-- compatible: "dongwoon,dw9807-vcm"
-- reg: I2C slave address
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
new file mode 100644
index 000000000000..aae246ca3fcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2018, 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9807-vcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9807 voice coil lens driver
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+description: |
+  DW9807 is a 10-bit DAC with current sink capability. It is intended for
+  controlling voice coil lenses.
+
+properties:
+  compatible:
+    const: dongwoon,dw9807-vcm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lens@e {
+            compatible = "dongwoon,dw9807-vcm";
+            reg = <0x0e>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml
new file mode 100644
index 000000000000..2bf1a81feaf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc0308.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc0308.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxycore GC0308 and GC0309 Image Sensors
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  The GalaxyCore GC0308 (1/6.5") and GC0309 (1/9") are 640x480 VGA sensors
+  programmable through an I2C interface and connected via parallel bus.
+  They include an ISP capable of auto exposure and auto white balance.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: galaxycore,gc0308
+      - items:
+          - const: galaxycore,gc0309
+          - const: galaxycore,gc0308
+
+  reg:
+    const: 0x21
+
+  clocks:
+    description: Reference to the xclk clock.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO descriptor for the reset pin.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO descriptor for the powerdown pin.
+    maxItems: 1
+
+  vdd28-supply:
+    description: 2.8V supply
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-width: true
+          data-shift: true
+          hsync-active: true
+          vsync-active: true
+          data-active: true
+          pclk-sample: true
+
+        required:
+          - bus-width
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - powerdown-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@21 {
+            compatible = "galaxycore,gc0308";
+            reg = <0x21>;
+            clocks = <&camera_clk>;
+            powerdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+            vdd28-supply = <&vdd28>;
+
+            port {
+                gc0308_ep: endpoint {
+                    remote-endpoint = <&parallel_from_gc0308>;
+                    bus-width = <8>;
+                    data-shift = <2>; /* lines 9:2 are used */
+                    hsync-active = <1>; /* active high */
+                    vsync-active = <1>; /* active high */
+                    data-active = <1>; /* active high */
+                    pclk-sample = <1>; /* sample on rising edge */
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc05a2.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc05a2.yaml
new file mode 100644
index 000000000000..0e7a7b5ac89f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc05a2.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc05a2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GalaxyCore gc05a2 1/5" 5M Pixel MIPI CSI-2 sensor
+
+maintainers:
+  - Zhi Mao <zhi.mao@mediatek.com>
+
+description:
+  The gc05a2 is a raw image sensor with an MIPI CSI-2 image data
+  interface and CCI (I2C compatible) control bus. The output format
+  is raw Bayer.
+
+properties:
+  compatible:
+    const: galaxycore,gc05a2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dovdd-supply: true
+
+  avdd-supply: true
+
+  dvdd-supply: true
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the RESETB pin.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@37 {
+            compatible =  "galaxycore,gc05a2";
+            reg = <0x37>;
+
+            clocks = <&gc05a2_clk>;
+
+            reset-gpios = <&pio 21 GPIO_ACTIVE_LOW>;
+
+            avdd-supply = <&gc05a2_avdd>;
+            dovdd-supply = <&gc05a2_dovdd>;
+            dvdd-supply = <&gc05a2_dvdd>;
+
+            port {
+                sensor_out: endpoint {
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <448000000 224000000>;
+                    remote-endpoint = <&seninf_csi_port_1_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml
new file mode 100644
index 000000000000..51b8ece09c72
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc08a3.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2023 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc08a3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GalaxyCore gc08a3 1/4" 8M Pixel MIPI CSI-2 sensor
+
+maintainers:
+  - Zhi Mao <zhi.mao@mediatek.com>
+
+description:
+  The gc08a3 is a raw image sensor with an MIPI CSI-2 image data
+  interface and CCI (I2C compatible) control bus. The output format
+  is raw Bayer.
+
+properties:
+  compatible:
+    const: galaxycore,gc08a3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dovdd-supply: true
+
+  avdd-supply: true
+
+  dvdd-supply: true
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the RESETB pin.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@31 {
+            compatible = "galaxycore,gc08a3";
+            reg = <0x31>;
+
+            clocks = <&gc08a3_clk>;
+
+            reset-gpios = <&pio 19 GPIO_ACTIVE_LOW>;
+
+            avdd-supply = <&gc08a3_avdd>;
+            dovdd-supply = <&gc08a3_dovdd>;
+            dvdd-supply = <&gc08a3_dvdd>;
+
+            port {
+                sensor_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <336000000 207000000>;
+                    remote-endpoint = <&seninf_csi_port_0_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
new file mode 100644
index 000000000000..9eac588de0bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxy Core 1/5'' UXGA CMOS Image Sensor
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+description:
+  The Galaxy Core GC2145 is a 2 Megapixel CMOS image sensor, for mobile
+  phone camera applications and digital camera products. GC2145 incorporates a
+  1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal
+  processor allowing AE/AWB/interpolation/de-noise/color-conversion and
+  gamma correction. Bayer RGB, RGB565 and YCbCr 4:2:2 can be provided by the
+  sensor. It is programmable through an I2C interface. Image data is sent
+  either through a parallel interface or through MIPI CSI-2.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: galaxycore,gc2145
+
+  reg:
+    const: 0x3c
+
+  clocks:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  iovdd-supply:
+    description: Power Supply for I/O circuits (1.7 - 3V).
+
+  avdd-supply:
+    description: Power for analog circuit/sensor array (2.7 - 3V).
+
+  dvdd-supply:
+    description: Power for digital core (1.7 - 1.9V).
+
+  orientation: true
+
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+        required:
+          - link-frequencies
+
+    required:
+      - endpoint
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - powerdown-gpios
+  - reset-gpios
+  - iovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "galaxycore,gc2145";
+            reg = <0x3c>;
+            clocks = <&clk_ext_camera>;
+            iovdd-supply = <&scmi_v3v3_sw>;
+            avdd-supply = <&scmi_v3v3_sw>;
+            dvdd-supply = <&scmi_v3v3_sw>;
+            powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+            reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&mipid02_0>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <120000000 192000000 240000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
index 85a8877c2f38..1a57f2aa1982 100644
--- a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
@@ -14,6 +14,9 @@ description: |-
   interface and CCI (I2C compatible) control bus. The output format
   is raw Bayer.
 
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
 properties:
   compatible:
     const: hynix,hi846
@@ -25,12 +28,6 @@ properties:
     items:
       - description: Reference to the mclk clock.
 
-  assigned-clocks:
-    maxItems: 1
-
-  assigned-clock-rates:
-    maxItems: 1
-
   reset-gpios:
     description: Reference to the GPIO connected to the RESETB pin. Active low.
     maxItems: 1
@@ -49,7 +46,8 @@ properties:
     description: Definition of the regulator used for the VDDD power supply.
 
   port:
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
 
     properties:
       endpoint:
@@ -68,21 +66,22 @@ properties:
                   - const: 1
                   - const: 2
 
+          link-frequencies: true
+
         required:
           - data-lanes
+          - link-frequencies
 
 required:
   - compatible
   - reg
   - clocks
-  - assigned-clocks
-  - assigned-clock-rates
   - vddio-supply
   - vdda-supply
   - vddd-supply
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -98,13 +97,13 @@ examples:
             pinctrl-names = "default";
             pinctrl-0 = <&pinctrl_csi1>;
             clocks = <&clk 0>;
-            assigned-clocks = <&clk 0>;
-            assigned-clock-rates = <25000000>;
             vdda-supply = <&reg_camera_vdda>;
             vddd-supply = <&reg_camera_vddd>;
             vddio-supply = <&reg_camera_vddio>;
             reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
             shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+            orientation = <0>;
+            rotation = <0>;
 
             port {
                 camera_out: endpoint {
diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
deleted file mode 100644
index 5fc96944b448..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml
+++ /dev/null
@@ -1,109 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/media/i2c/imx219.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
-
-maintainers:
-  - Dave Stevenson <dave.stevenson@raspberrypi.com>
-
-description: |-
-  The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
-  with an active array size of 3280H x 2464V. It is programmable through
-  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
-  Image data is sent through MIPI CSI-2, which is configured as either 2 or
-  4 data lanes.
-
-properties:
-  compatible:
-    const: sony,imx219
-
-  reg:
-    description: I2C device address
-    maxItems: 1
-
-  clocks:
-    maxItems: 1
-
-  VDIG-supply:
-    description:
-      Digital I/O voltage supply, 1.8 volts
-
-  VANA-supply:
-    description:
-      Analog voltage supply, 2.8 volts
-
-  VDDL-supply:
-    description:
-      Digital core voltage supply, 1.2 volts
-
-  reset-gpios:
-    maxItems: 1
-    description: |-
-      Reference to the GPIO connected to the xclr pin, if any.
-      Must be released (set high) after all supplies are applied.
-
-  port:
-    $ref: /schemas/graph.yaml#/$defs/port-base
-    additionalProperties: false
-
-    properties:
-      endpoint:
-        $ref: /schemas/media/video-interfaces.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          data-lanes:
-            description: |-
-              The sensor supports either two-lane, or four-lane operation.
-              If this property is omitted four-lane operation is assumed.
-              For two-lane operation the property must be set to <1 2>.
-            items:
-              - const: 1
-              - const: 2
-
-          clock-noncontinuous: true
-          link-frequencies: true
-
-        required:
-          - link-frequencies
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - VANA-supply
-  - VDIG-supply
-  - VDDL-supply
-  - port
-
-additionalProperties: false
-
-examples:
-  - |
-    i2c0 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        imx219: sensor@10 {
-            compatible = "sony,imx219";
-            reg = <0x10>;
-            clocks = <&imx219_clk>;
-            VANA-supply = <&imx219_vana>;   /* 2.8v */
-            VDIG-supply = <&imx219_vdig>;   /* 1.8v */
-            VDDL-supply = <&imx219_vddl>;   /* 1.2v */
-
-            port {
-                imx219_0: endpoint {
-                    remote-endpoint = <&csi1_ep>;
-                    data-lanes = <1 2>;
-                    clock-noncontinuous;
-                    link-frequencies = /bits/ 64 <456000000>;
-                };
-            };
-        };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/media/i2c/imx258.yaml b/Documentation/devicetree/bindings/media/i2c/imx258.yaml
deleted file mode 100644
index cde0f7383b2a..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/imx258.yaml
+++ /dev/null
@@ -1,134 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/media/i2c/imx258.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Sony IMX258 13 Mpixel CMOS Digital Image Sensor
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-
-description: |-
-  IMX258 is a diagonal 5.867mm (Type 1/3.06) 13 Mega-pixel CMOS active pixel
-  type stacked image sensor with a square pixel array of size 4208 x 3120. It
-  is programmable through I2C interface.  Image data is sent through MIPI
-  CSI-2.
-
-properties:
-  compatible:
-    const: sony,imx258
-
-  assigned-clocks: true
-  assigned-clock-parents: true
-  assigned-clock-rates: true
-
-  clocks:
-    description:
-      Clock frequency from 6 to 27 MHz.
-    maxItems: 1
-
-  reg:
-    maxItems: 1
-
-  reset-gpios:
-    description: |-
-      Reference to the GPIO connected to the XCLR pin, if any.
-
-  vana-supply:
-    description:
-      Analog voltage (VANA) supply, 2.7 V
-
-  vdig-supply:
-    description:
-      Digital I/O voltage (VDIG) supply, 1.2 V
-
-  vif-supply:
-    description:
-      Interface voltage (VIF) supply, 1.8 V
-
-  # See ../video-interfaces.txt for more details
-  port:
-    $ref: /schemas/graph.yaml#/$defs/port-base
-    additionalProperties: false
-
-    properties:
-      endpoint:
-        $ref: /schemas/media/video-interfaces.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          data-lanes:
-            oneOf:
-              - items:
-                  - const: 1
-                  - const: 2
-                  - const: 3
-                  - const: 4
-              - items:
-                  - const: 1
-                  - const: 2
-
-          link-frequencies: true
-
-        required:
-          - data-lanes
-          - link-frequencies
-
-required:
-  - compatible
-  - reg
-  - port
-
-additionalProperties: false
-
-examples:
-  - |
-    i2c0 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        sensor@6c {
-            compatible = "sony,imx258";
-            reg = <0x6c>;
-            clocks = <&imx258_clk>;
-
-            port {
-                endpoint {
-                    remote-endpoint = <&csi1_ep>;
-                    data-lanes = <1 2 3 4>;
-                    link-frequencies = /bits/ 64 <320000000>;
-                };
-            };
-        };
-    };
-
-    /* Oscillator on the camera board */
-    imx258_clk: clk {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency = <19200000>;
-    };
-
-  - |
-    i2c0 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        sensor@6c {
-            compatible = "sony,imx258";
-            reg = <0x6c>;
-            clocks = <&imx258_clk>;
-
-            assigned-clocks = <&imx258_clk>;
-            assigned-clock-rates = <19200000>;
-
-            port {
-                endpoint {
-                    remote-endpoint = <&csi1_ep>;
-                    data-lanes = <1 2 3 4>;
-                    link-frequencies = /bits/ 64 <633600000>;
-                };
-            };
-        };
-    };
diff --git a/Documentation/devicetree/bindings/media/i2c/imx290.txt b/Documentation/devicetree/bindings/media/i2c/imx290.txt
deleted file mode 100644
index a3cc21410f7c..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/imx290.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-* Sony IMX290 1/2.8-Inch CMOS Image Sensor
-
-The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with
-Square Pixel for Color Cameras. It is programmable through I2C and 4-wire
-interfaces. The sensor output is available via CMOS logic parallel SDR output,
-Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the
-default. No bindings have been defined for the other busses.
-
-Required Properties:
-- compatible: Should be "sony,imx290"
-- reg: I2C bus address of the device
-- clocks: Reference to the xclk clock.
-- clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock in Hz.
-- vdddo-supply: Sensor digital IO regulator.
-- vdda-supply: Sensor analog regulator.
-- vddd-supply: Sensor digital core regulator.
-
-Optional Properties:
-- reset-gpios: Sensor reset GPIO
-
-The imx290 device node should contain one 'port' child node with
-an 'endpoint' subnode. For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Required Properties on endpoint:
-- data-lanes: check ../video-interfaces.txt
-- link-frequencies: check ../video-interfaces.txt
-- remote-endpoint: check ../video-interfaces.txt
-
-Example:
-	&i2c1 {
-		...
-		imx290: camera-sensor@1a {
-			compatible = "sony,imx290";
-			reg = <0x1a>;
-
-			reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&camera_rear_default>;
-
-			clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
-			clock-names = "xclk";
-			clock-frequency = <37125000>;
-
-			vdddo-supply = <&camera_vdddo_1v8>;
-			vdda-supply = <&camera_vdda_2v8>;
-			vddd-supply = <&camera_vddd_1v5>;
-
-			port {
-				imx290_ep: endpoint {
-					data-lanes = <1 2 3 4>;
-					link-frequencies = /bits/ 64 <445500000>;
-					remote-endpoint = <&csiphy0_ep>;
-				};
-			};
-		};
diff --git a/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
new file mode 100644
index 000000000000..034a6e3466af
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/isil,isl79987.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL79987 Analog to MIPI CSI-2 decoder
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+  - Marek Vasut <marex@denx.de>
+
+description:
+  The Intersil ISL79987 is an analog to MIPI CSI-2 decoder which is capable of
+  receiving up to four analog stream and multiplexing them into up to four MIPI
+  CSI-2 virtual channels, using one MIPI clock lane and 1/2 data lanes.
+
+properties:
+  compatible:
+    enum:
+      - isil,isl79987
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      A GPIO spec for the RSTB pin (active high)
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      A GPIO spec for the Power Down pin (active high)
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 2
+
+            required:
+              - data-lanes
+
+    patternProperties:
+      "^port@[1-4]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input ports
+
+    required:
+      - port@0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      isl7998x_mipi@44 {
+        compatible = "isil,isl79987";
+        reg = <0x44>;
+        powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            isl79987_out: endpoint {
+              remote-endpoint = <&mipi_csi2_in>;
+              data-lanes = <1 2>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            endpoint {
+              remote-endpoint = <&camera_0>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+            endpoint {
+              remote-endpoint = <&camera_1>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/max2175.txt b/Documentation/devicetree/bindings/media/i2c/maxim,max2175.txt
index 02b4e9cd7b1b..02b4e9cd7b1b 100644
--- a/Documentation/devicetree/bindings/media/i2c/max2175.txt
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max2175.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index 02f656e78700..a37447256f8d 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -39,7 +39,7 @@ properties:
     maxItems: 1
 
   poc-supply:
-    description: Regulator providing Power over Coax to the cameras
+    description: Regulator providing Power over Coax to all the ports
 
   enable-gpios:
     description: GPIO connected to the \#PWDN pin with inverted polarity
@@ -50,6 +50,21 @@ properties:
   '#gpio-cells':
     const: 2
 
+  maxim,bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 24, 27, 32 ]
+    description: |
+      The GMSL serial data bus width. This setting is normally controlled by
+      the BWS pin, but may be overridden with this property. The value must
+      match the configuration of the remote serializers.
+
+  maxim,i2c-remote-bus-hz:
+    enum: [ 8470, 28300, 84700, 105000, 173000, 339000, 533000, 837000 ]
+    default: 105000
+    description: |
+      The I2C clock frequency for the remote I2C buses. The value must match
+      the configuration of the remote serializers.
+
   maxim,reverse-channel-microvolt:
     minimum: 30000
     maximum: 200000
@@ -70,6 +85,28 @@ properties:
       a remote serializer whose high-threshold noise immunity is not enabled
       is 100000 micro volts
 
+  maxim,gpio-poc:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    description: |
+      Index of the MAX9286 gpio output line (0 or 1) that controls Power over
+      Coax to the cameras and its associated polarity flag.
+
+      The property accepts an array of two unsigned integers, the first being
+      the gpio line index (0 or 1) and the second being the gpio line polarity
+      flag (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW) as defined in
+      <include/dt-bindings/gpio/gpio.h>.
+
+      When the remote cameras power is controlled by one of the MAX9286 gpio
+      lines, this property has to be used to specify which line among the two
+      available ones controls the remote camera power enablement.
+
+      When this property is used it is not possible to register a gpio
+      controller as the gpio lines are controlled directly by the MAX9286 and
+      not available for consumers, nor the 'poc-supply' property should be
+      specified.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -119,6 +156,7 @@ properties:
     patternProperties:
       "^i2c@[0-3]$":
         type: object
+        additionalProperties: false
         description: |
           Child node of the i2c bus multiplexer which represents a GMSL link.
           Each serializer device on the GMSL link remote end is represented with
@@ -130,6 +168,12 @@ properties:
             description: The index of the GMSL channel.
             maxItems: 1
 
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
         patternProperties:
           "^camera@[a-f0-9]+$":
             type: object
@@ -160,12 +204,36 @@ properties:
 
             additionalProperties: false
 
+patternProperties:
+  "^port[0-3]-poc-supply$":
+    description: Regulator providing Power over Coax for a particular port
+
 required:
   - compatible
   - reg
   - ports
   - i2c-mux
-  - gpio-controller
+
+allOf:
+  # Only one way of specifying power supplies is allowed: 'maxim,gpio-poc',
+  # 'poc-supply' or per-port poc-supply. Additionally, if 'maxim,gpio-poc' is
+  # present, then 'gpio-controller' isn't allowed.
+  - if:
+      required:
+        - maxim,gpio-poc
+    then:
+      properties:
+        poc-supply: false
+        gpio-controller: false
+      patternProperties:
+        "^port[0-3]-poc-supply$": false
+
+  - if:
+      required:
+        - poc-supply
+    then:
+      patternProperties:
+        "^port[0-3]-poc-supply$": false
 
 additionalProperties: false
 
@@ -174,140 +242,175 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
 
     i2c@e66d8000 {
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-      reg = <0 0xe66d8000>;
+        reg = <0 0xe66d8000>;
 
-      gmsl-deserializer@2c {
-        compatible = "maxim,max9286";
-        reg = <0x2c>;
-        poc-supply = <&camera_poc_12v>;
-        enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+        gmsl-deserializer@2c {
+            compatible = "maxim,max9286";
+            reg = <0x2c>;
+            poc-supply = <&camera_poc_12v>;
+            enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
 
-        gpio-controller;
-        #gpio-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
 
-        maxim,reverse-channel-microvolt = <170000>;
+            maxim,i2c-remote-bus-hz = <339000>;
+            maxim,reverse-channel-microvolt = <170000>;
 
-        ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
+                port@0 {
+                    reg = <0>;
 
-            max9286_in0: endpoint {
-              remote-endpoint = <&rdacm20_out0>;
-            };
-          };
+                    max9286_in0: endpoint {
+                        remote-endpoint = <&rdacm20_out0>;
+                    };
+                };
 
-          port@1 {
-            reg = <1>;
+                port@1 {
+                    reg = <1>;
 
-            max9286_in1: endpoint {
-              remote-endpoint = <&rdacm20_out1>;
-            };
-          };
+                    max9286_in1: endpoint {
+                        remote-endpoint = <&rdacm20_out1>;
+                    };
+                };
 
-          port@2 {
-            reg = <2>;
+                port@2 {
+                    reg = <2>;
 
-            max9286_in2: endpoint {
-              remote-endpoint = <&rdacm20_out2>;
-            };
-          };
+                    max9286_in2: endpoint {
+                        remote-endpoint = <&rdacm20_out2>;
+                    };
+                };
 
-          port@3 {
-            reg = <3>;
+                port@3 {
+                    reg = <3>;
 
-            max9286_in3: endpoint {
-              remote-endpoint = <&rdacm20_out3>;
-            };
-          };
+                    max9286_in3: endpoint {
+                        remote-endpoint = <&rdacm20_out3>;
+                    };
+                };
 
-          port@4 {
-            reg = <4>;
+                port@4 {
+                    reg = <4>;
 
-            max9286_out: endpoint {
-              data-lanes = <1 2 3 4>;
-              remote-endpoint = <&csi40_in>;
+                    max9286_out: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
+                };
             };
-          };
-        };
 
-        i2c-mux {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          i2c@0 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <0>;
+                i2c@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
 
-            camera@51 {
-              compatible = "imi,rdacm20";
-              reg = <0x51>, <0x61>;
+                    camera@51 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x51>, <0x61>;
 
-              port {
-                rdacm20_out0: endpoint {
-                  remote-endpoint = <&max9286_in0>;
-                };
-              };
+                        port {
+                            rdacm20_out0: endpoint {
+                                remote-endpoint = <&max9286_in0>;
+                            };
+                        };
 
-            };
-          };
+                    };
+                };
 
-          i2c@1 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <1>;
+                i2c@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+
+                    camera@52 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x52>, <0x62>;
+
+                        port {
+                            rdacm20_out1: endpoint {
+                                remote-endpoint = <&max9286_in1>;
+                            };
+                        };
+                    };
+                };
 
-            camera@52 {
-              compatible = "imi,rdacm20";
-              reg = <0x52>, <0x62>;
+                i2c@2 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <2>;
+
+                    camera@53 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x53>, <0x63>;
+
+                        port {
+                            rdacm20_out2: endpoint {
+                                remote-endpoint = <&max9286_in2>;
+                            };
+                        };
+                    };
+                };
 
-              port {
-                rdacm20_out1: endpoint {
-                  remote-endpoint = <&max9286_in1>;
+                i2c@3 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <3>;
+
+                    camera@54 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x54>, <0x64>;
+
+                        port {
+                            rdacm20_out3: endpoint {
+                                remote-endpoint = <&max9286_in3>;
+                            };
+                        };
+                    };
                 };
-              };
             };
-          };
-
-          i2c@2 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <2>;
-
-            camera@53 {
-              compatible = "imi,rdacm20";
-              reg = <0x53>, <0x63>;
+        };
 
-              port {
-                rdacm20_out2: endpoint {
-                  remote-endpoint = <&max9286_in2>;
+        /*
+        * Example of a deserializer that controls the camera Power over Coax
+        * through one of its gpio lines.
+        */
+        gmsl-deserializer@6c {
+            compatible = "maxim,max9286";
+            reg = <0x6c>;
+            enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+
+            /*
+            * The remote camera power is controlled by MAX9286 GPIO line #0.
+            * No 'poc-supply' nor 'gpio-controller' are specified.
+            */
+            maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+
+            /*
+            * Do not describe connections as they're the same as in the previous
+            * example.
+            */
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@4 {
+                    reg = <4>;
                 };
-              };
             };
-          };
-
-          i2c@3 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <3>;
 
-            camera@54 {
-              compatible = "imi,rdacm20";
-              reg = <0x54>, <0x64>;
-
-              port {
-                rdacm20_out3: endpoint {
-                  remote-endpoint = <&max9286_in3>;
-                };
-              };
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
             };
-          };
         };
-      };
     };
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
new file mode 100644
index 000000000000..26f85151afbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96712.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Quad GMSL2 to CSI-2 Deserializer with GMSL1 Compatibility
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+
+description: |
+  The MAX96712 deserializer converts GMSL2 or GMSL1 serial inputs into MIPI
+  CSI-2 D-PHY or C-PHY formatted outputs. The device allows each link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96712 can accommodate as many as
+  four remotely located sensors using industry-standard coax or STP
+  interconnects.
+
+  Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+  forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, the
+  MAX96712 can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1
+  serializers or operate up to 3.12Gbps with GMSL2 serializers in GMSL1 mode.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - maxim,max96712
+          - maxim,max96724
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  enable-gpios: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 2
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 3
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes: true
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+              - bus-type
+
+    required:
+      - port@4
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c@e6508000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0 0xe6508000>;
+
+            gmsl0: gmsl-deserializer@49 {
+                    compatible = "maxim,max96712";
+                    reg = <0x49>;
+                    enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@4 {
+                                    reg = <4>;
+                                    max96712_out0: endpoint {
+                                            bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                                            clock-lanes = <0>;
+                                            data-lanes = <1 2 3 4>;
+                                            remote-endpoint = <&csi40_in>;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml
new file mode 100644
index 000000000000..3ace50e11921
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96714.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX96714 GMSL2 to CSI-2 Deserializer
+
+maintainers:
+  - Julien Massot <julien.massot@collabora.com>
+
+description:
+  The MAX96714 deserializer converts GMSL2 serial inputs into MIPI
+  CSI-2 D-PHY formatted output. The device allows the GMSL2 link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96714 can connect to one
+  remotely located serializer using industry-standard coax or STP
+  interconnects. The device cans operate in pixel or tunnel mode. In pixel mode
+  the MAX96714 can select individual video stream, while the tunnel mode forward all
+  the MIPI data received by the serializer.
+
+  The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+  forward direction and 187.5Mbps in the reverse direction.
+  MAX96714F only supports a fixed rate of 3Gbps in the forward direction.
+
+properties:
+  compatible:
+    oneOf:
+      - const: maxim,max96714f
+      - items:
+          - enum:
+              - maxim,max96714
+          - const: maxim,max96714f
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      Specifier for the GPIO connected to the PWDNB pin.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+        description: GMSL Input
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            description:
+              Endpoint for GMSL2-Link port.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 5
+
+              link-frequencies:
+                maxItems: 1
+
+            required:
+              - data-lanes
+
+    required:
+      - port@1
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-gate.yaml
+    unevaluatedProperties: false
+    description:
+      The MAX96714 will pass through and forward the I2C requests from the
+      incoming I2C bus over the GMSL2 link. Therefore it supports an i2c-gate
+      subnode to configure a serializer.
+
+  port0-poc-supply:
+    description: Regulator providing Power over Coax for the GMSL port
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        deserializer@28 {
+            compatible = "maxim,max96714f";
+            reg = <0x28>;
+            powerdown-gpios = <&main_gpio0 37 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    max96714_gmsl_in: endpoint {
+                        remote-endpoint = <&max96917f_gmsl_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    max96714_csi_out: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        link-frequencies = /bits/ 64 <400000000>;
+                        remote-endpoint = <&csi_in>;
+                    };
+                };
+            };
+
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                serializer@40 {
+                    compatible = "maxim,max96717f";
+                    reg = <0x40>;
+                    gpio-controller;
+                    #gpio-cells = <2>;
+                    #clock-cells = <0>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+                            max96717f_csi_in: endpoint {
+                                data-lanes = <1 2>;
+                                lane-polarities = <1 0 1>;
+                                remote-endpoint = <&sensor_out>;
+                            };
+                        };
+
+                        port@1 {
+                            reg = <1>;
+                            max96917f_gmsl_out: endpoint {
+                                remote-endpoint = <&max96714_gmsl_in>;
+                            };
+                        };
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
new file mode 100644
index 000000000000..d1e8ba6e368e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96717.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Collabora Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96717.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX96717 CSI-2 to GMSL2 Serializer
+
+maintainers:
+  - Julien Massot <julien.massot@collabora.com>
+
+description:
+  The MAX96717 serializer converts MIPI CSI-2 D-PHY formatted input
+  into GMSL2 serial outputs. The device allows the GMSL2 link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96717 can connect to one
+  remotely located deserializer using industry-standard coax or STP
+  interconnects. The device cans operate in pixel or tunnel mode. In pixel mode
+  the MAX96717 can select the MIPI datatype, while the tunnel mode forward all the MIPI
+  data received by the serializer.
+  The MAX96717 supports Reference Over Reverse (channel),
+  to generate a clock output for the sensor from the GMSL reverse channel.
+
+  The GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+  forward direction and 187.5Mbps in the reverse direction.
+  MAX96717F only supports a fixed rate of 3Gbps in the forward direction.
+
+properties:
+  compatible:
+    oneOf:
+      - const: maxim,max96717f
+      - items:
+          - enum:
+              - maxim,max96717
+          - const: maxim,max96717f
+
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is the GPIO pin number, second cell is the flags. The GPIO pin
+      number must be in range of [0, 10].
+
+  gpio-controller: true
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              lane-polarities:
+                minItems: 1
+                maxItems: 5
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+        description: GMSL Output port
+
+    required:
+      - port@1
+
+  i2c-gate:
+    $ref: /schemas/i2c/i2c-gate.yaml
+    unevaluatedProperties: false
+    description:
+      The MAX96717 will forward the I2C requests from the
+      incoming GMSL2 link. Therefore, it supports an i2c-gate
+      subnode to configure a sensor.
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        serializer: serializer@40 {
+            compatible = "maxim,max96717f";
+            reg = <0x40>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            #clock-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    max96717f_csi_in: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&sensor_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    max96917f_gmsl_out: endpoint {
+                        remote-endpoint = <&deser_gmsl_in>;
+                    };
+                };
+            };
+
+            i2c-gate {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                sensor@10 {
+                    compatible = "st,st-vgxy61";
+                    reg = <0x10>;
+                    reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
+                    clocks = <&serializer>;
+                    VCORE-supply = <&v1v2>;
+                    VDDIO-supply = <&v1v8>;
+                    VANA-supply = <&v2v8>;
+                    port {
+                        sensor_out: endpoint {
+                            data-lanes = <1 2 3 4>;
+                            remote-endpoint = <&max96717f_csi_in>;
+                        };
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/micron,mt9m111.txt
index d0bed6fa901a..d0bed6fa901a 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
+++ b/Documentation/devicetree/bindings/media/i2c/micron,mt9m111.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
index 39395ea8c318..217b08c8cbbd 100644
--- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
@@ -23,6 +23,9 @@ description:
   More detailed documentation can be found in
   Documentation/devicetree/bindings/media/video-interfaces.txt .
 
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -52,22 +55,17 @@ properties:
 
   clock-frequency:
     description: Frequency of the external clock to the sensor in Hz.
+    deprecated: true
 
   reset-gpios:
     description: Reset GPIO. Also commonly called XSHUTDOWN in hardware
       documentation.
     maxItems: 1
 
-  flash-leds:
-    description: Flash LED phandles. See ../video-interfaces.txt for details.
-
-  lens-focus:
-    description: Lens focus controller phandles. See ../video-interfaces.txt
-      for details.
+  flash-leds: true
+  lens-focus: true
 
   rotation:
-    description: Rotation of the sensor.  See ../video-interfaces.txt for
-      details.
     enum: [ 0, 180 ]
 
   port:
@@ -96,7 +94,6 @@ properties:
 required:
   - compatible
   - reg
-  - clock-frequency
   - clocks
 
 additionalProperties: false
@@ -104,8 +101,9 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
-    i2c2 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -116,15 +114,18 @@ examples:
             reg = <0x10>;
             reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
             vana-supply = <&vaux3>;
+
             clocks = <&omap3_isp 0>;
-            clock-frequency = <9600000>;
+            assigned-clocks = <&omap3_isp 0>;
+            assigned-clock-rates = <9600000>;
+
             port {
                 ccs_ep: endpoint {
                     data-lanes = <1 2>;
                     remote-endpoint = <&csi2a_ep>;
                     link-frequencies = /bits/ 64 <199200000 210000000
                                                   499200000>;
-                    bus-type = <4>;
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/media/i2c/nxp,tda19971.yaml b/Documentation/devicetree/bindings/media/i2c/nxp,tda19971.yaml
new file mode 100644
index 000000000000..477e59316dfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/nxp,tda19971.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/nxp,tda19971.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TDA1997x HDMI receiver
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The TDA19971/73 are HDMI video receivers.
+
+  The TDA19971 Video port output pins can be used as follows:
+   - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4]
+   - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4]
+   - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4]
+   - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2]
+   - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0]
+   - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles)
+   - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles)
+   - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles)
+
+  The TDA19973 Video port output pins can be used as follows:
+   - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0]
+   - YUV444 12bit per color (36 bits total): Y[11:0] Cb[11:0] Cr[11:0]
+   - YUV422 semi-planar 12bit per component (24 bits total): Y[11:0] CbCr[11:0]
+   - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles)
+
+  The Video port output pins are mapped via 4-bit 'pin groups' allowing
+  for a variety of connection possibilities including swapping pin order within
+  pin groups. The video_portcfg device-tree property consists of register mapping
+  pairs which map a chip-specific VP output register to a 4-bit pin group. If
+  the pin group needs to be bit-swapped you can use the *_S pin-group defines.
+
+properties:
+  compatible:
+    enum:
+      - nxp,tda19971
+      - nxp,tda19973
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  DOVDD-supply: true
+
+  DVDD-supply: true
+
+  AVDD-supply: true
+
+  '#sound-dai-cells':
+    const: 0
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+  nxp,vidout-portcfg:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 4
+    items:
+      items:
+        - description: Video Port control registers index.
+          maximum: 8
+          minimum: 0
+        - description: pin(pinswapped) groups
+
+    description:
+      array of pairs mapping VP output pins to pin groups.
+
+  nxp,audout-format:
+    enum:
+      - i2s
+      - spdif
+
+  nxp,audout-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 24, 32]
+    description:
+      width of audio output data bus.
+
+  nxp,audout-layout:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description:
+      data layout (0=AP0 used, 1=AP0/AP1/AP2/AP3 used).
+
+  nxp,audout-mclk-fs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Multiplication factor between stream rate and codec mclk.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - DOVDD-supply
+  - AVDD-supply
+  - DVDD-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/media/tda1997x.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi-receiver@48 {
+            compatible = "nxp,tda19971";
+            reg = <0x48>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_tda1997x>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            DOVDD-supply = <&reg_3p3v>;
+            AVDD-supply = <&reg_1p8v>;
+            DVDD-supply = <&reg_1p8v>;
+            /* audio */
+            #sound-dai-cells = <0>;
+            nxp,audout-format = "i2s";
+            nxp,audout-layout = <0>;
+            nxp,audout-width = <16>;
+            nxp,audout-mclk-fs = <128>;
+            /*
+             * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+             * and Y[11:4] across 16bits in the same pixclk cycle.
+             */
+            nxp,vidout-portcfg =
+                /* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */
+                < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+                /* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */
+                < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+                /* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */
+                < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+                /* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */
+                < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+                    bus-width = <16>;
+                    hsync-active = <1>;
+                    vsync-active = <1>;
+                    data-active = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml
new file mode 100644
index 000000000000..b617cc5c6a9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/onnn,ar0521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor AR0521 MIPI CSI-2 sensor
+
+maintainers:
+  - Krzysztof Hałasa <khalasa@piap.pl>
+
+description: |-
+  The AR0521 is a raw CMOS image sensor with MIPI CSI-2 and
+  I2C-compatible control interface.
+
+properties:
+  compatible:
+    const: onnn,ar0521
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: extclk
+
+  vaa-supply:
+    description:
+      Definition of the regulator used as analog (2.7 V) voltage supply.
+
+  vdd-supply:
+    description:
+      Definition of the regulator used as digital core (1.2 V) voltage supply.
+
+  vdd_io-supply:
+    description:
+      Definition of the regulator used as digital I/O (1.8 V) voltage supply.
+
+  reset-gpios:
+    description: reset GPIO, usually active low
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            const: 4
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vaa-supply
+  - vdd-supply
+  - vdd_io-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ar0521: camera-sensor@36 {
+                    compatible = "onnn,ar0521";
+                    reg = <0x36>;
+                    pinctrl-names = "default";
+                    pinctrl-0 = <&pinctrl_mipi_camera>;
+                    clocks = <&clks IMX6QDL_CLK_CKO>;
+                    clock-names = "extclk";
+                    reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+                    vaa-supply = <&reg_2p7v>;
+                    vdd-supply = <&reg_1p2v>;
+                    vdd_io-supply = <&reg_1p8v>;
+
+                    port {
+                           mipi_camera_to_mipi_csi2: endpoint {
+                                    remote-endpoint = <&mipi_csi2_in>;
+                                    data-lanes = <1 2 3 4>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m001.txt b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m001.txt
index c920552b03ef..c920552b03ef 100644
--- a/Documentation/devicetree/bindings/media/i2c/mt9m001.txt
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m001.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
new file mode 100644
index 000000000000..a89f740214f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/onnn,mt9m114.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: onsemi 1/6-inch 720p CMOS Digital Image Sensor
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The onsemi MT9M114 is a 1/6-inch 720p (1.26 Mp) CMOS digital image sensor
+  with an active pixel-array size of 1296H x 976V. It is programmable through
+  an I2C interface and outputs image data over a 8-bit parallel or 1-lane MIPI
+  CSI-2 connection.
+
+properties:
+  compatible:
+    const: onnn,mt9m114
+
+  reg:
+    description: I2C device address
+    enum:
+      - 0x48
+      - 0x5d
+
+  clocks:
+    description: EXTCLK clock signal
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Core digital voltage supply, 1.8V
+
+  vddio-supply:
+    description:
+      I/O digital voltage supply, 1.8V or 2.8V
+
+  vaa-supply:
+    description:
+      Analog voltage supply, 2.8V
+
+  reset-gpios:
+    description: |-
+      Reference to the GPIO connected to the RESET_BAR pin, if any (active
+      low).
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          bus-type:
+            enum: [4, 5, 6]
+
+          link-frequencies: true
+          remote-endpoint: true
+
+          # The number and mapping of lanes (for CSI-2), and the bus width and
+          # signal polarities (for parallel and BT.656) are fixed and must not
+          # be specified.
+
+        required:
+          - bus-type
+          - link-frequencies
+
+  slew-rate:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Slew rate ot the output pads DOUT[7:0], LINE_VALID, FRAME_VALID and
+      PIXCLK. Higher values imply steeper voltage-flanks on the pads.
+    minimum: 0
+    maximum: 7
+    default: 7
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdd-supply
+  - vddio-supply
+  - vaa-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@48 {
+            compatible = "onnn,mt9m114";
+            reg = <0x48>;
+
+            clocks = <&clk24m 0>;
+
+            reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+
+            vddio-supply = <&reg_cam_1v8>;
+            vdd-supply = <&reg_cam_1v8>;
+            vaa-supply = <&reg_2p8v>;
+
+            port {
+                endpoint {
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                    link-frequencies = /bits/ 64 <384000000>;
+                    remote-endpoint = <&mipi_csi_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2685.txt b/Documentation/devicetree/bindings/media/i2c/ov2685.txt
deleted file mode 100644
index 625c4a8c0d53..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov2685.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Omnivision OV2685 MIPI CSI-2 sensor
-
-Required Properties:
-- compatible: shall be "ovti,ov2685"
-- clocks: reference to the xvclk input clock
-- clock-names: shall be "xvclk"
-- avdd-supply: Analog voltage supply, 2.8 volts
-- dovdd-supply: Digital I/O voltage supply, 1.8 volts
-- dvdd-supply: Digital core voltage supply, 1.8 volts
-- reset-gpios: Low active reset gpio
-
-The device node shall contain one 'port' child node with an
-'endpoint' subnode for its digital output video port,
-in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-The endpoint optional property 'data-lanes' shall be "<1>".
-
-Example:
-&i2c7 {
-	ov2685: camera-sensor@3c {
-		compatible = "ovti,ov2685";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&clk_24m_cam>;
-
-		clocks = <&cru SCLK_TESTCLKOUT1>;
-		clock-names = "xvclk";
-
-		avdd-supply = <&pp2800_cam>;
-		dovdd-supply = <&pp1800>;
-		dvdd-supply = <&pp1800>;
-		reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-
-		port {
-			ucam_out: endpoint {
-				remote-endpoint = <&mipi_in_ucam>;
-				data-lanes = <1>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
deleted file mode 100644
index 72ad992f77be..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor
-
-The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with
-an active array size of 2592H x 1944V. It is programmable through a serial I2C
-interface.
-
-Required Properties:
-- compatible: Value should be "ovti,ov5645".
-- clocks: Reference to the xclk clock.
-- clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock.
-- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
-  to the hardware pin PWDNB which is physically active low.
-- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
-  the hardware pin RESETB.
-- vdddo-supply: Chip digital IO regulator.
-- vdda-supply: Chip analog regulator.
-- vddd-supply: Chip digital core regulator.
-
-The device node must contain one 'port' child node for its digital output
-video port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	&i2c1 {
-		...
-
-		ov5645: ov5645@3c {
-			compatible = "ovti,ov5645";
-			reg = <0x3c>;
-
-			enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&camera_rear_default>;
-
-			clocks = <&clks 200>;
-			clock-names = "xclk";
-			clock-frequency = <24000000>;
-
-			vdddo-supply = <&camera_dovdd_1v8>;
-			vdda-supply = <&camera_avdd_2v8>;
-			vddd-supply = <&camera_dvdd_1v2>;
-
-			port {
-				ov5645_ep: endpoint {
-					clock-lanes = <1>;
-					data-lanes = <0 2>;
-					remote-endpoint = <&csi0_ep>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5695.txt b/Documentation/devicetree/bindings/media/i2c/ov5695.txt
deleted file mode 100644
index 640a63717d96..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov5695.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Omnivision OV5695 MIPI CSI-2 sensor
-
-Required Properties:
-- compatible: shall be "ovti,ov5695"
-- clocks: reference to the xvclk input clock
-- clock-names: shall be "xvclk"
-- avdd-supply: Analog voltage supply, 2.8 volts
-- dovdd-supply: Digital I/O voltage supply, 1.8 volts
-- dvdd-supply: Digital core voltage supply, 1.2 volts
-- reset-gpios: Low active reset gpio
-
-The device node shall contain one 'port' child node with an
-'endpoint' subnode for its digital output video port,
-in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-The endpoint optional property 'data-lanes' shall be "<1 2>".
-
-Example:
-&i2c7 {
-	ov5695: camera-sensor@36 {
-		compatible = "ovti,ov5695";
-		reg = <0x36>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&clk_24m_cam>;
-
-		clocks = <&cru SCLK_TESTCLKOUT1>;
-		clock-names = "xvclk";
-
-		avdd-supply = <&pp2800_cam>;
-		dovdd-supply = <&pp1800>;
-		dvdd-supply = <&pp1250_cam>;
-		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-
-		port {
-			wcam_out: endpoint {
-				remote-endpoint = <&mipi_in_wcam>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7251.txt b/Documentation/devicetree/bindings/media/i2c/ov7251.txt
deleted file mode 100644
index 8281151f7493..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov7251.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Omnivision 1/7.5-Inch B&W VGA CMOS Digital Image Sensor
-
-The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor
-with an active array size of 640H x 480V. It is programmable through a serial
-I2C interface.
-
-Required Properties:
-- compatible: Value should be "ovti,ov7251".
-- clocks: Reference to the xclk clock.
-- clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock.
-- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
-  to the hardware pin XSHUTDOWN which is physically active low.
-- vdddo-supply: Chip digital IO regulator.
-- vdda-supply: Chip analog regulator.
-- vddd-supply: Chip digital core regulator.
-
-The device node shall contain one 'port' child node with a single 'endpoint'
-subnode for its digital output video port, in accordance with the video
-interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	&i2c1 {
-		...
-
-		ov7251: camera-sensor@60 {
-			compatible = "ovti,ov7251";
-			reg = <0x60>;
-
-			enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&camera_bw_default>;
-
-			clocks = <&clks 200>;
-			clock-names = "xclk";
-			clock-frequency = <24000000>;
-
-			vdddo-supply = <&camera_dovdd_1v8>;
-			vdda-supply = <&camera_avdd_2v8>;
-			vddd-supply = <&camera_dvdd_1v2>;
-
-			port {
-				ov7251_ep: endpoint {
-					clock-lanes = <1>;
-					data-lanes = <0>;
-					remote-endpoint = <&csi0_ep>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
deleted file mode 100644
index baf92aaaf049..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
+++ /dev/null
@@ -1,134 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-# Copyright (c) 2019 MediaTek Inc.
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
-
-maintainers:
-  - Dongchun Zhu <dongchun.zhu@mediatek.com>
-
-description: |-
-  The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
-  image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
-  sub-sampled, and windowed 10-bit MIPI images in various formats via the
-  Serial Camera Control Bus (SCCB) interface. This chip is programmable
-  through I2C and two-wire SCCB. The sensor output is available via CSI-2
-  serial data output (up to 4-lane).
-
-properties:
-  compatible:
-    const: ovti,ov8856
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    maxItems: 1
-
-  clock-names:
-    description:
-      Input clock for the sensor.
-    items:
-      - const: xvclk
-
-  clock-frequency:
-    description:
-      Frequency of the xvclk clock in Hertz.
-
-  dovdd-supply:
-    description:
-      Definition of the regulator used as interface power supply.
-
-  avdd-supply:
-    description:
-      Definition of the regulator used as analog power supply.
-
-  dvdd-supply:
-    description:
-      Definition of the regulator used as digital power supply.
-
-  reset-gpios:
-    description:
-      The phandle and specifier for the GPIO that controls sensor reset.
-      This corresponds to the hardware pin XSHUTDOWN which is physically
-      active low.
-
-  port:
-    $ref: /schemas/graph.yaml#/$defs/port-base
-    additionalProperties: false
-
-    properties:
-      endpoint:
-        $ref: /schemas/media/video-interfaces.yaml#
-        unevaluatedProperties: false
-
-        properties:
-          data-lanes:
-            description: |-
-              The driver only supports four-lane operation.
-            items:
-              - const: 1
-              - const: 2
-              - const: 3
-              - const: 4
-
-          link-frequencies:
-            description: Frequencies listed are driver, not h/w limitations.
-            maxItems: 2
-            items:
-              enum: [ 360000000, 180000000 ]
-
-        required:
-          - link-frequencies
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - clock-frequency
-  - dovdd-supply
-  - avdd-supply
-  - dvdd-supply
-  - reset-gpios
-  - port
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/gpio/gpio.h>
-
-    i2c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        ov8856: camera@10 {
-            compatible = "ovti,ov8856";
-            reg = <0x10>;
-
-            reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
-            pinctrl-names = "default";
-            pinctrl-0 = <&clk_24m_cam>;
-
-            clocks = <&cam_osc>;
-            clock-names = "xvclk";
-            clock-frequency = <19200000>;
-
-            avdd-supply = <&mt6358_vcama2_reg>;
-            dvdd-supply = <&mt6358_vcamd_reg>;
-            dovdd-supply = <&mt6358_vcamio_reg>;
-
-            port {
-                wcam_out: endpoint {
-                    remote-endpoint = <&mipi_in_wcam>;
-                    data-lanes = <1 2 3 4>;
-                    link-frequencies = /bits/ 64 <360000000>;
-                };
-            };
-        };
-    };
-...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,og01a1b.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,og01a1b.yaml
new file mode 100644
index 000000000000..ca57c01739d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,og01a1b.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023-2024 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,og01a1b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OG01A1B Image Sensor
+
+maintainers:
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+description:
+  The OmniVision OG01A1B is black and white CMOS 1.3 Megapixel (1280x1024)
+  image sensor controlled over an I2C-compatible SCCB bus.
+  The sensor transmits images on a MIPI CSI-2 output interface with one or
+  two data lanes.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,og01a1b
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  reset-gpios:
+    description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
+    maxItems: 1
+
+  strobe-gpios:
+    description: Input GPIO connected to strobe pad of the sensor.
+    maxItems: 1
+
+  avdd-supply:
+    description: Analogue circuit voltage supply.
+
+  dovdd-supply:
+    description: I/O circuit voltage supply.
+
+  dvdd-supply:
+    description: Digital circuit voltage supply.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@60 {
+            compatible = "ovti,og01a1b";
+            reg = <0x60>;
+            clocks = <&clk 0>;
+            reset-gpios = <&gpio 117 GPIO_ACTIVE_LOW>;
+            avdd-supply = <&vreg_3v3>;
+            dovdd-supply = <&vreg_1p8>;
+            dvdd-supply = <&vreg_1p2>;
+
+            port {
+                og01a1b_ep: endpoint {
+                    remote-endpoint = <&csiphy_ep>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <500000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,og0ve1b.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,og0ve1b.yaml
new file mode 100644
index 000000000000..bd2f1ae23e65
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,og0ve1b.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,og0ve1b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OG0VE1B Image Sensor
+
+description:
+  OmniVision OG0VE1B image sensor is a low power consuming monochrome
+  image sensor. The sensor is controlled over a serial camera control
+  bus protocol (SCCB), the widest supported image size is 640x480 at
+  120 frames per second rate, data output format is 8/10-bit RAW
+  transferred over one-lane MIPI D-PHY at up to 800 Mbps.
+
+maintainers:
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,og0ve1b
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XVCLK supply clock, 6MHz to 27MHz frequency.
+    maxItems: 1
+
+  reset-gpios:
+    description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
+    maxItems: 1
+
+  strobe-gpios:
+    description: Input GPIO connected to strobe pad of the sensor.
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog voltage supply, 2.6 to 3.0 volts.
+
+  dovdd-supply:
+    description: Digital I/O voltage supply, 1.7 to 3.0 volts.
+
+  dvdd-supply:
+    description: Digital core voltage supply.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@3e {
+              compatible = "ovti,og0ve1b";
+              reg = <0x3e>;
+              clocks = <&camera_clk 0>;
+              assigned-clocks = <&camera_clk 0>;
+              assigned-clock-rates = <24000000>;
+              reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+              avdd-supply = <&vreg_2p8>;
+              dovdd-supply = <&vreg_1p8>;
+              dvdd-supply = <&vreg_1p2>;
+
+              port {
+                  endpoint {
+                      link-frequencies = /bits/ 64 <500000000>;
+                      remote-endpoint = <&mipi_csi2_ep>;
+                  };
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
index 63a040944f3d..0e1d9c390180 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Omnivision OV02A10 CMOS Sensor Device Tree Bindings
+title: Omnivision OV02A10 CMOS Sensor
 
 maintainers:
   - Dongchun Zhu <dongchun.zhu@mediatek.com>
@@ -39,6 +39,7 @@ properties:
   clock-frequency:
     description:
       Frequency of the eclk clock in Hz.
+    deprecated: true
 
   dovdd-supply:
     description:
@@ -68,12 +69,6 @@ properties:
       marked GPIO_ACTIVE_LOW.
     maxItems: 1
 
-  rotation:
-    enum:
-      - 0    # Sensor Mounted Upright
-      - 180  # Sensor Mounted Upside Down
-    default: 0
-
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
     additionalProperties: false
@@ -88,7 +83,7 @@ properties:
         properties:
           link-frequencies: true
           ovti,mipi-clock-voltage:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             description:
               Definition of MIPI clock voltage unit. This entry corresponds to
               the link speed defined by the 'link-frequencies' property.
@@ -106,7 +101,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - clock-frequency
   - dovdd-supply
   - avdd-supply
   - dvdd-supply
@@ -114,7 +108,7 @@ required:
   - reset-gpios
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -133,7 +127,6 @@ examples:
 
             clocks = <&ov02a10_clk>;
             clock-names = "eclk";
-            clock-frequency = <24000000>;
 
             rotation = <180>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02e10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02e10.yaml
new file mode 100644
index 000000000000..03d476bcf805
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02e10.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2025 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov02e10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV02E10 CMOS Sensor
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  The Omnivision OV02E10 and OV02C10 sensors are 2 megapixel, CMOS image sensors which support:
+  - Automatic black level calibration (ABLC)
+  - Programmable controls for frame rate, mirror and flip, binning, cropping
+    and windowing
+  - OVO2C10
+    - 10 bit RAW Bayer 1920x1080 60 fps 2-lane @ 800 Mbps/lane
+    - 10 bit RAW Bayer 1920x1080 60 fps 1-lane @ 1500 Mbps/lane
+    - 10 bit RAW Bayer 1280x720 60 fps cropped 1-lane @ 960 Mbps/lane
+    - 10 bit RGB/BW 640x480 60 fps bin2 or skip2 1-lane @ 800 Mbps/lane
+    - 10 bit RGB/BW 480x270 60 fps bin4 or skip4 1-lane @ 800 Mbps/lane
+  - OV02E10
+    - 10 bit RAW Bayer 1920x1088 60 fps 2-lane @ 720 Mbps/lane
+    - 10 bit RAW Bayer 1280x1080 60 fps 2-lane @ 720 Mbps/lane
+    - 10 bit Quad Bayer 960x540 60 fps 2-lane 360 Mbps/lane
+    - 8 bit Quad Bayer 480x270 1/3/5/10 fps sub2 288 Mbps/lane
+    - 8 bit Quad Bayer 232x132 1/3/5/10 fps sub4 144 Mbps/lane
+  - Dynamic defect pixel cancellation
+  - Standard SCCB command interface
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ovti,ov02c10
+      - ovti,ov02e10
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analogue circuit voltage supply.
+
+  dovdd-supply:
+    description: I/O circuit voltage supply.
+
+  dvdd-supply:
+    description: Digital circuit voltage supply.
+
+  reset-gpios:
+    description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+          link-frequencies: true
+          remote-endpoint: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+          - remote-endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov02e10: camera@10 {
+            compatible = "ovti,ov02e10";
+            reg = <0x10>;
+
+            reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam_rgb_defaultt>;
+
+            clocks = <&ov02e10_clk>;
+
+            assigned-clocks = <&ov02e10_clk>;
+            assigned-clock-parents = <&ov02e10_clk_parent>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vreg_l7b_2p8>;
+            dvdd-supply = <&vreg_l7b_1p8>;
+            dovdd-supply = <&vreg_l3m_1p8>;
+
+            port {
+                ov02e10_ep: endpoint {
+                    remote-endpoint = <&csiphy4_ep>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <400000000>;
+                };
+            };
+        };
+
+        ov02c10: camera@36 {
+            compatible = "ovti,ov02c10";
+            reg = <0x36>;
+
+            reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam_rgb_defaultt>;
+
+            clocks = <&ov02c10_clk>;
+
+            assigned-clocks = <&ov02c10_clk>;
+            assigned-clock-parents = <&ov02c10_clk_parent>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vreg_l7b_2p8>;
+            dvdd-supply = <&vreg_l7b_1p8>;
+            dovdd-supply = <&vreg_l3m_1p8>;
+
+            port {
+                ov02c10_ep: endpoint {
+                    remote-endpoint = <&csiphy4_ep>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <400000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml
new file mode 100644
index 000000000000..552efdf8934f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2024 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov08x40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV08X40 CMOS Sensor
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  The Omnivision OV08X40 is a 9.2 megapixel, CMOS image sensor which supports:
+  - Automatic black level calibration (ABLC)
+  - Programmable controls for frame rate, mirror and flip, binning, cropping
+    and windowing
+  - Output formats 10-bit 4C RGB RAW, 10-bit Bayer RAW
+  - 4-lane MIPI D-PHY TX @ 1 Gbps per lane
+  - 2-lane MPIP D-PHY TX @ 2 Gbps per lane
+  - Dynamic defect pixel cancellation
+  - Standard SCCB command interface
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov08x40
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analogue circuit voltage supply.
+
+  dovdd-supply:
+    description: I/O circuit voltage supply.
+
+  dvdd-supply:
+    description: Digital circuit voltage supply.
+
+  reset-gpios:
+    description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+          link-frequencies: true
+          remote-endpoint: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+          - remote-endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov08x40: camera@36 {
+            compatible = "ovti,ov08x40";
+            reg = <0x36>;
+
+            reset-gpios = <&tlmm 111 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam_rgb_defaultt>;
+
+            clocks = <&ov08x40_clk>;
+
+            assigned-clocks = <&ov08x40_clk>;
+            assigned-clock-parents = <&ov08x40_clk_parent>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vreg_l7b_2p8>;
+            dvdd-supply = <&vreg_l7b_1p8>;
+            dovdd-supply = <&vreg_l3m_1p8>;
+
+            port {
+                ov08x40_ep: endpoint {
+                    remote-endpoint = <&csiphy4_ep>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <400000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt b/Documentation/devicetree/bindings/media/i2c/ovti,ov2640.txt
index 989ce6cb6ac3..989ce6cb6ac3 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov2640.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2640.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2659.txt b/Documentation/devicetree/bindings/media/i2c/ovti,ov2659.txt
index 92989a619f29..92989a619f29 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov2659.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2659.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
index cf456f8d9ddc..634d3b821b8c 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml
@@ -37,31 +37,45 @@ properties:
       active low.
     maxItems: 1
 
-  dovdd-supply:
+  DOVDD-supply:
     description:
       Definition of the regulator used as interface power supply.
 
-  avdd-supply:
+  AVDD-supply:
     description:
       Definition of the regulator used as analog power supply.
 
-  dvdd-supply:
+  DVDD-supply:
     description:
       Definition of the regulator used as digital power supply.
 
   port:
-    $ref: /schemas/graph.yaml#/properties/port
     description:
       A node containing an output port node.
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          link-frequencies: true
+
+          remote-endpoint: true
+
+        required:
+          - link-frequencies
 
 required:
   - compatible
   - reg
   - clocks
   - clock-names
-  - dovdd-supply
-  - avdd-supply
-  - dvdd-supply
+  - DOVDD-supply
+  - AVDD-supply
+  - DVDD-supply
   - reset-gpios
   - port
 
@@ -82,13 +96,14 @@ examples:
                 clock-names = "xvclk";
                 reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 
-                dovdd-supply = <&sw2_reg>;
-                dvdd-supply = <&sw2_reg>;
-                avdd-supply = <&reg_peri_3p15v>;
+                DOVDD-supply = <&sw2_reg>;
+                DVDD-supply = <&sw2_reg>;
+                AVDD-supply = <&reg_peri_3p15v>;
 
                 port {
                         ov2680_to_mipi: endpoint {
                                 remote-endpoint = <&mipi_from_sensor>;
+                                link-frequencies = /bits/ 64 <330000000>;
                         };
                 };
         };
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
new file mode 100644
index 000000000000..e2ffe0a9c26b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov2685.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV2685 Image Sensor
+
+maintainers:
+  - Shunqian Zheng <zhengsq@rock-chips.com>
+
+properties:
+  compatible:
+    const: ovti,ov2685
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XVCLK clock
+
+  clock-names:
+    items:
+      - const: xvclk
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  avdd-supply:
+    description: Analog Domain Power Supply
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset Pin GPIO Control (active low)
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - dvdd-supply
+  - avdd-supply
+  - dovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov2685: camera-sensor@3c {
+            compatible = "ovti,ov2685";
+            reg = <0x3c>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clk_24m_cam>;
+
+            clocks = <&cru SCLK_TESTCLKOUT1>;
+            clock-names = "xvclk";
+
+            avdd-supply = <&pp2800_cam>;
+            dovdd-supply = <&pp1800>;
+            dvdd-supply = <&pp1800>;
+            reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2735.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2735.yaml
new file mode 100644
index 000000000000..bb34f21519c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2735.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov2735.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV2735 Image Sensor
+
+maintainers:
+  - Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
+
+description:
+  The OmniVision OV2735 is a 2MP (1920x1080) color CMOS image sensor controlled
+  through an I2C-compatible SCCB bus. it outputs RAW10 format and uses a 1/2.7"
+  optical format.
+
+properties:
+  compatible:
+    const: ovti,ov2735
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XVCLK clock
+
+  avdd-supply:
+    description: Analog Domain Power Supply
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset Pin GPIO Control (active low)
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      Active-low enable pin. Labeled as 'PWDN' in the datasheet, but acts as
+      an enable signal. During power rail ramp-up, the device remains powered
+      down. Once power rails are stable, pulling this pin low powers on the
+      device.
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - avdd-supply
+  - dovdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@3c {
+            compatible = "ovti,ov2735";
+            reg = <0x3c>;
+            clocks = <&ov2735_clk>;
+
+            avdd-supply = <&ov2735_avdd>;
+            dovdd-supply = <&ov2735_dovdd>;
+            dvdd-supply = <&ov2735_dvdd>;
+
+            reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+
+            port {
+                cam_out: endpoint {
+                    remote-endpoint = <&mipi_in_cam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <420000000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
new file mode 100644
index 000000000000..d96199031b66
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV4689 CMOS
+
+maintainers:
+  - Mikhail Rudenko <mike.rudenko@gmail.com>
+
+description: |
+  The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel
+  image sensor. Ihis chip supports high frame rate speeds up to 90 fps
+  at 2688x1520 resolution. It is programmable through an I2C
+  interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2
+  connection.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov4689
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      External clock (XVCLK) for the sensor, 6-64 MHz
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.7-3.0 V
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.6-3.0 V
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.1-1.3 V
+
+  powerdown-gpios:
+    description:
+      GPIO connected to the powerdown pin (active low)
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the reset pin (active low)
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov4689: camera@36 {
+            compatible = "ovti,ov4689";
+            reg = <0x36>;
+
+            clocks = <&ov4689_clk>;
+
+            avdd-supply = <&ov4689_avdd>;
+            dovdd-supply = <&ov4689_dovdd>;
+            dvdd-supply = <&ov4689_dvdd>;
+
+            powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>;
+
+            orientation = <2>;
+            rotation = <0>;
+
+            port {
+                wcam_out: endpoint {
+                    remote-endpoint = <&mipi_in_wcam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <504000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
index 540fd69ac39f..2c5e69356658 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ovti,ov5640.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OmniVision OV5640 Image Sensor Device Tree Bindings
+title: OmniVision OV5640 Image Sensor
 
 maintainers:
   - Steve Longerbeam <slongerbeam@gmail.com>
@@ -44,11 +44,6 @@ properties:
     description: >
       Reference to the GPIO connected to the reset pin, if any.
 
-  rotation:
-    enum:
-      - 0
-      - 180
-
   port:
     description: Digital Output Port
     $ref: /schemas/graph.yaml#/$defs/port-base
@@ -85,7 +80,7 @@ required:
   - DOVDD-supply
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml
new file mode 100644
index 000000000000..01f8b2b3fd17
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5642.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5642 Image Sensor
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov5642
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  AVDD-supply:
+    description: Analog voltage supply, 2.8V.
+
+  DVDD-supply:
+    description: Digital core voltage supply, 1.5V.
+
+  DOVDD-supply:
+    description: Digital I/O voltage supply, 1.8V.
+
+  powerdown-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the powerdown pin, if any.
+
+  reset-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the reset pin, if any.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+
+          bus-width:
+            enum: [8, 10]
+            default: 10
+
+          data-shift:
+            enum: [0, 2]
+            default: 0
+
+          hsync-active:
+            enum: [0, 1]
+            default: 1
+
+          vsync-active:
+            enum: [0, 1]
+            default: 1
+
+          pclk-sample:
+            enum: [0, 1]
+            default: 1
+
+        allOf:
+          - if:
+              properties:
+                bus-type:
+                  const: 6
+            then:
+              properties:
+                hsync-active: false
+                vsync-active: false
+
+          - if:
+              properties:
+                bus-width:
+                  const: 10
+            then:
+              properties:
+                data-shift:
+                  const: 0
+
+        required:
+          - bus-type
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+      #include <dt-bindings/media/video-interfaces.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@3c {
+              compatible = "ovti,ov5642";
+              reg = <0x3c>;
+              pinctrl-names = "default";
+              pinctrl-0 = <&pinctrl_ov5642>;
+              clocks = <&clk_ext_camera>;
+              DOVDD-supply = <&vgen4_reg>;
+              AVDD-supply = <&vgen3_reg>;
+              DVDD-supply = <&vgen2_reg>;
+              powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+              reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+              port {
+                  ov5642_to_parallel: endpoint {
+                      bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+                      remote-endpoint = <&parallel_from_ov5642>;
+                      bus-width = <8>;
+                      data-shift = <2>; /* lines 9:2 are used */
+                      hsync-active = <0>;
+                      vsync-active = <0>;
+                      pclk-sample = <1>;
+                  };
+              };
+          };
+      };
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml
new file mode 100644
index 000000000000..a583714b1ac7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5645.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5645 Image Sensor
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+properties:
+  compatible:
+    const: ovti,ov5645
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz.
+    deprecated: true
+
+  vdda-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  vddd-supply:
+    description: Digital core voltage supply, 1.5 volts
+
+  vdddo-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the PWDNB pin, if any.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the RESETB pin, if any.
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdddo-supply
+  - vdda-supply
+  - vddd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "ovti,ov5645";
+            reg = <0x3c>;
+
+            clocks = <&clks 1>;
+            assigned-clocks = <&clks 1>;
+            assigned-clock-rates = <24000000>;
+
+            vdddo-supply = <&ov5645_vdddo_1v8>;
+            vdda-supply = <&ov5645_vdda_2v8>;
+            vddd-supply = <&ov5645_vddd_1v5>;
+            enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_ov5645>;
+
+            port {
+                ov5645_ep: endpoint {
+                    remote-endpoint = <&csi0_ep>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
index 246dc5fec716..8028c8b107c4 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ovti,ov5648.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OmniVision OV5648 Image Sensor Device Tree Bindings
+title: OmniVision OV5648 Image Sensor
 
 maintainers:
   - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
@@ -20,12 +20,6 @@ properties:
     items:
       - description: XVCLK Clock
 
-  assigned-clocks:
-    maxItems: 1
-
-  assigned-clock-rates:
-    maxItems: 1
-
   dvdd-supply:
     description: Digital Domain Power Supply
 
@@ -68,8 +62,6 @@ required:
   - compatible
   - reg
   - clocks
-  - assigned-clocks
-  - assigned-clock-rates
   - dvdd-supply
   - dovdd-supply
   - port
@@ -81,7 +73,7 @@ examples:
     #include <dt-bindings/clock/sun8i-v3s-ccu.h>
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -93,9 +85,6 @@ examples:
             avdd-supply = <&ov5648_avdd>;
             dovdd-supply = <&ov5648_dovdd>;
             clocks = <&ov5648_xvclk 0>;
-            assigned-clocks = <&ov5648_xvclk 0>;
-            assigned-clock-rates = <24000000>;
-
 
             ov5648_out: port {
                 ov5648_out_mipi_csi2: endpoint {
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
new file mode 100644
index 000000000000..6e089fe1d613
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5670.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5670 5 Megapixels raw image sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+description: |-
+  The OV5670 is a 5 Megapixels raw image sensor which provides images in 10-bits
+  RAW BGGR Bayer format on a 2 data lanes MIPI CSI-2 serial interface and is
+  controlled through an I2C compatible control bus.
+
+properties:
+  compatible:
+    const: ovti,ov5670
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: System clock. From 6 to 27 MHz.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: Reference to the GPIO connected to the PWDNB pin. Active low.
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low.
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog circuit power. Typically 2.8V.
+
+  dvdd-supply:
+    description: Digital circuit power. Typically 1.2V.
+
+  dovdd-supply:
+    description: Digital I/O circuit power. Typically 2.8V or 1.8V.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+          clock-noncontinuous: true
+          remote-endpoint: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5670: sensor@36 {
+            compatible = "ovti,ov5670";
+            reg = <0x36>;
+
+            clocks = <&sensor_xclk>;
+
+            port {
+                ov5670_ep: endpoint {
+                    remote-endpoint = <&csi_ep>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
new file mode 100644
index 000000000000..ad07204057f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5675.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5675 CMOS Sensor
+
+maintainers:
+  - Quentin Schulz <quentin.schulz@theobroma-systems.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+description: |
+  The Omnivision OV5675 is a high performance, 1/5-inch, 5 megapixel, CMOS
+  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface.
+
+  This chip is programmable through I2C and two-wire SCCB. The sensor output
+  is available via CSI-2 serial data output (up to 2-lane).
+
+properties:
+  compatible:
+    const: ovti,ov5675
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      System input clock (aka XVCLK). From 6 to 27 MHz.
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.8 volts.
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.8 volts.
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.2 volts.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDN which is physically
+      active low.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+          # Supports max data transfer of 900 Mbps per lane
+          link-frequencies: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5675: camera@36 {
+            compatible = "ovti,ov5675";
+            reg = <0x36>;
+
+            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cif_clkout_m0>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vcc_1v8>;
+            dvdd-supply = <&vcc_1v2>;
+            dovdd-supply = <&vcc_2v8>;
+
+            rotation = <90>;
+            orientation = <0>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <450000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
new file mode 100644
index 000000000000..3368b3bd8ef2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Amarulasolutions
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5693/OV5695 CMOS Sensors
+
+maintainers:
+  - Tommaso Merciai <tomm.merciai@gmail.com>
+
+description: |
+  The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS
+  image sensors that deliver 2592x1944 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface.
+
+  OV5693/OV5695 are controlled via I2C and two-wire Serial Camera Control Bus
+  (SCCB). The sensor output is available via CSI-2 serial data output (up to
+  2-lane).
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ovti,ov5693
+    then:
+      properties:
+        port:
+          properties:
+            endpoint:
+              required:
+                - link-frequencies
+
+properties:
+  compatible:
+    enum:
+      - ovti,ov5693
+      - ovti,ov5695
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      System input clock (aka XVCLK). From 6 to 27 MHz.
+    maxItems: 1
+
+  clock-names:
+    const: xvclk
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.8V.
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.8V.
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.2V.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDN which is physically
+      active low.
+    maxItems: 1
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5693: camera@36 {
+            compatible = "ovti,ov5693";
+            reg = <0x36>;
+
+            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cif_clkout_m0>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vcc_1v8>;
+            dvdd-supply = <&vcc_1v2>;
+            dovdd-supply = <&vcc_2v8>;
+
+            rotation = <90>;
+            orientation = <0>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <450000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov6211.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov6211.yaml
new file mode 100644
index 000000000000..5a857fa2f371
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov6211.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov6211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV6211 Image Sensor
+
+description:
+  OmniVision OV6211 image sensor is a high performance monochrome image
+  sensor. The sensor is controlled over a serial camera control bus
+  protocol (SCCB), the widest supported output image frame size is 400x400
+  at 120 frames per second rate, data output format is 8/10-bit RAW
+  transferred over one-lane MIPI D-PHY interface.
+
+maintainers:
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov6211
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XVCLK supply clock, 6MHz to 27MHz frequency.
+    maxItems: 1
+
+  reset-gpios:
+    description: Active low GPIO connected to XSHUTDOWN pad of the sensor.
+    maxItems: 1
+
+  strobe-gpios:
+    description: Input GPIO connected to strobe pad of the sensor.
+    maxItems: 1
+
+  avdd-supply:
+    description: Analogue voltage supply, 2.6 to 3.0 volts.
+
+  dovdd-supply:
+    description: Digital I/O voltage supply, 1.8 volts.
+
+  dvdd-supply:
+    description: Digital core voltage supply.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@60 {
+              compatible = "ovti,ov6211";
+              reg = <0x60>;
+              clocks = <&camera_clk 0>;
+              assigned-clocks = <&camera_clk 0>;
+              assigned-clock-rates = <24000000>;
+              reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+              avdd-supply = <&vreg_2p8>;
+              dovdd-supply = <&vreg_1p8>;
+              dvdd-supply = <&vreg_1p2>;
+
+              port {
+                  endpoint {
+                      link-frequencies = /bits/ 64 <480000000>;
+                      remote-endpoint = <&mipi_csi2_ep>;
+                  };
+              };
+          };
+      };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
new file mode 100644
index 000000000000..2b6143aff391
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov64a40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV64A40 Image Sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov64a40
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  dvdd-supply:
+    description: Digital core voltage supply, 1.1 volts
+
+  dovdd-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          bus-type:
+            enum:
+              - 1 # MIPI CSI-2 C-PHY
+              - 4 # MIPI CSI-2 D-PHY
+          data-lanes: true
+          link-frequencies: true
+          clock-noncontinuous: true
+          remote-endpoint: true
+
+        required:
+          - bus-type
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@36 {
+              compatible = "ovti,ov64a40";
+              reg = <0x36>;
+              clocks = <&camera_clk>;
+              dovdd-supply = <&vgen4_reg>;
+              avdd-supply = <&vgen3_reg>;
+              dvdd-supply = <&vgen2_reg>;
+              powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+              reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+              rotation = <180>;
+              orientation = <2>;
+
+              port {
+                  endpoint {
+                      remote-endpoint = <&mipi_csi2_in>;
+                      bus-type = <4>;
+                      data-lanes = <1 2 3 4>;
+                      link-frequencies = /bits/ 64 <456000000>;
+                  };
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml
new file mode 100644
index 000000000000..922996da59b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov7251.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov7251.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV7251 Image Sensor
+
+description:
+  The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor
+  with an active array size of 640H x 480V. It is programmable through a serial
+  I2C interface.
+
+maintainers:
+  - Todor Tomov <todor.too@gmail.com>
+
+properties:
+  compatible:
+    const: ovti,ov7251
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  clock-names:
+    const: xclk
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz.
+    deprecated: true
+
+  vdda-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  vddd-supply:
+    description: Digital core voltage supply, 1.2 volts
+
+  vdddo-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the XSHUTDOWN pin, if any. Polarity
+      is GPIO_ACTIVE_HIGH.
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          clock-lanes:
+            maximum: 1
+
+          data-lanes:
+            maxItems: 1
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdddo-supply
+  - vdda-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "ovti,ov7251";
+            reg = <0x3c>;
+
+            clocks = <&clks 1>;
+            assigned-clocks = <&clks 1>;
+            assigned-clock-rates = <24000000>;
+
+            vdddo-supply = <&ov7251_vdddo_1v8>;
+            vdda-supply = <&ov7251_vdda_2v8>;
+            vddd-supply = <&ov7251_vddd_1v5>;
+            enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+
+            port {
+                ov7251_ep: endpoint {
+                    remote-endpoint = <&csi0_ep>;
+                    clock-lanes = <1>;
+                    data-lanes = <0>;
+                    link-frequencies = /bits/ 64 <240000000 319200000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7670.txt b/Documentation/devicetree/bindings/media/i2c/ovti,ov7670.txt
index 2c972a56f3cb..2c972a56f3cb 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov7670.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov7670.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
index 44529425ce3a..5d24edba8f99 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
@@ -105,8 +105,9 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
         ov772x: camera@21 {
@@ -118,7 +119,7 @@ examples:
 
             port {
                 ov772x_0: endpoint {
-                    bus-type = <5>;
+                    bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                     vsync-active = <0>;
                     hsync-active = <0>;
                     pclk-sample = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/ov7740.txt b/Documentation/devicetree/bindings/media/i2c/ovti,ov7740.txt
index af781c3a5f0e..af781c3a5f0e 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov7740.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov7740.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8856.yaml
new file mode 100644
index 000000000000..fa71f24823f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8856.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2019 MediaTek Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov8856.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV8856 CMOS Sensor
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+description: |-
+  The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
+  image sensor that delivers 3264x2448 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface. This chip is programmable
+  through I2C and two-wire SCCB. The sensor output is available via CSI-2
+  serial data output (up to 4-lane).
+
+properties:
+  compatible:
+    const: ovti,ov8856
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      Input clock for the sensor.
+    items:
+      - const: xvclk
+
+  clock-frequency:
+    description:
+      Frequency of the xvclk clock in Hertz.
+    deprecated: true
+
+  dovdd-supply:
+    description:
+      Definition of the regulator used as interface power supply.
+
+  avdd-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+  dvdd-supply:
+    description:
+      Definition of the regulator used as digital power supply.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDOWN which is physically
+      active low.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov8856: camera@10 {
+            compatible = "ovti,ov8856";
+            reg = <0x10>;
+
+            reset-gpios = <&pio 111 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clk_24m_cam>;
+
+            clocks = <&cam_osc>;
+            clock-names = "xvclk";
+
+            avdd-supply = <&mt6358_vcama2_reg>;
+            dvdd-supply = <&mt6358_vcamd_reg>;
+            dovdd-supply = <&mt6358_vcamio_reg>;
+
+            port {
+                wcam_out: endpoint {
+                    remote-endpoint = <&mipi_in_wcam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <360000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
new file mode 100644
index 000000000000..491f2931e6bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov8858.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV8858 Image Sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+  - Nicholas Roth <nicholas@rothemail.net>
+
+description: |
+  The OmniVision OV8858 is a color CMOS 8 Megapixels (3264x2448) image sensor
+  controlled through an I2C-compatible SCCB bus. The sensor transmits images
+  on a MIPI CSI-2 output interface with up to 4 data lanes.
+
+$ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov8858
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: XVCLK external clock
+
+  clock-names:
+    const: xvclk
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  avdd-supply:
+    description: Analog Domain Power Supply
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  powerdown-gpios:
+    description: PWDNB powerdown GPIO (active low)
+
+  reset-gpios:
+    maxItems: 1
+    description: XSHUTDN reset GPIO (active low)
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 4
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov8858: camera@36 {
+            compatible = "ovti,ov8858";
+            reg = <0x36>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            clock-names = "xvclk";
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <24000000>;
+
+            dovdd-supply = <&vcc1v8_dvp>;
+
+            reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
+            powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
index b962863e4f65..320b9aacbb8b 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ovti,ov8865.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OmniVision OV8865 Image Sensor Device Tree Bindings
+title: OmniVision OV8865 Image Sensor
 
 maintainers:
   - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
@@ -20,12 +20,6 @@ properties:
     items:
       - description: EXTCLK Clock
 
-  assigned-clocks:
-    maxItems: 1
-
-  assigned-clock-rates:
-    maxItems: 1
-
   dvdd-supply:
     description: Digital Domain Power Supply
 
@@ -68,8 +62,6 @@ required:
   - compatible
   - reg
   - clocks
-  - assigned-clocks
-  - assigned-clock-rates
   - dvdd-supply
   - avdd-supply
   - dovdd-supply
@@ -82,7 +74,7 @@ examples:
     #include <dt-bindings/clock/sun8i-a83t-ccu.h>
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c2 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -94,8 +86,6 @@ examples:
             pinctrl-0 = <&csi_mclk_pin>;
 
             clocks = <&ccu CLK_CSI_MCLK>;
-            assigned-clocks = <&ccu CLK_CSI_MCLK>;
-            assigned-clock-rates = <24000000>;
 
             avdd-supply = <&reg_ov8865_avdd>;
             dovdd-supply = <&reg_ov8865_dovdd>;
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
index bf115ab9d926..401c8613f840 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
@@ -16,18 +16,17 @@ description:
   sensor with an active array size of 1296H x 816V. It is programmable through
   I2C interface. The I2C client address is fixed to 0x60/0x70 as per sensor data
   sheet. Image data is sent through MIPI CSI-2.
+  OV9281 has a different lens chief ray angle.
 
 properties:
   compatible:
-    const: ovti,ov9282
+    enum:
+      - ovti,ov9281
+      - ovti,ov9282
   reg:
     description: I2C address
     maxItems: 1
 
-  assigned-clocks: true
-  assigned-clock-parents: true
-  assigned-clock-rates: true
-
   clocks:
     description: Clock frequency from 6 to 27MHz
     maxItems: 1
@@ -36,6 +35,15 @@ properties:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1
 
+  avdd-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  dvdd-supply:
+    description: Digital core voltage supply, 1.2 volts
+
+  dovdd-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
   port:
     additionalProperties: false
     $ref: /schemas/graph.yaml#/$defs/port-base
@@ -66,7 +74,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -75,10 +83,6 @@ examples:
             reg = <0x60>;
             clocks = <&ov9282_clk>;
 
-            assigned-clocks = <&ov9282_clk>;
-            assigned-clock-parents = <&ov9282_clk_parent>;
-            assigned-clock-rates = <24000000>;
-
             port {
                 ov9282: endpoint {
                     remote-endpoint = <&cam>;
diff --git a/Documentation/devicetree/bindings/media/i2c/ov9650.txt b/Documentation/devicetree/bindings/media/i2c/ovti,ov9650.txt
index 506dfc52872a..506dfc52872a 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov9650.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9650.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
index f50e54a722eb..34a05df786ce 100644
--- a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
@@ -50,7 +50,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml
new file mode 100644
index 000000000000..4cb0f5aa1301
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k5baf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: samsung,s5k5baf
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  clock-frequency:
+    default: 24000000
+    description: mclk clock frequency
+    deprecated: true
+
+  rstn-gpios:
+    maxItems: 1
+    description: RSTN pin
+
+  stbyn-gpios:
+    maxItems: 1
+    description: STDBYN pin
+
+  vdda-supply:
+    description: Analog power supply 2.8V (2.6V to 3.0V)
+
+  vddio-supply:
+    description: I/O power supply 1.8V (1.65V to 1.95V) or 2.8V (2.5V to 3.1V)
+
+  vddreg-supply:
+    description:
+      Regulator input power supply 1.8V (1.7V to 1.9V) or 2.8V (2.6V to 3.0)
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - rstn-gpios
+  - stbyn-gpios
+  - vdda-supply
+  - vddio-supply
+  - vddreg-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@2d {
+            compatible = "samsung,s5k5baf";
+            reg = <0x2d>;
+
+            clocks = <&camera 0>;
+            assigned-clocks = <&camera 0>;
+            assigned-clock-rates = <24000000>;
+
+            clock-names = "mclk";
+            rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>;
+            stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>;
+            vdda-supply = <&cam_io_en_reg>;
+            vddio-supply = <&vtcam_reg>;
+            vddreg-supply = <&vt_core_15v_reg>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csis1_ep>;
+                    data-lanes = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
new file mode 100644
index 000000000000..9df1e0f872f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K6A3(YX) raw image sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data
+  interfaces and CCI (I2C compatible) control bus.
+
+properties:
+  compatible:
+    const: samsung,s5k6a3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: extclk
+
+  clock-frequency:
+    default: 24000000
+    description: extclk clock frequency
+    deprecated: true
+
+  gpios:
+    maxItems: 1
+    description: GPIO connected to the RESET pin
+
+  afvdd-supply:
+    description: AF (actuator) voltage supply
+
+  svdda-supply:
+    description: Core voltage supply
+
+  svddio-supply:
+    description: I/O voltage supply
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - gpios
+  - afvdd-supply
+  - svdda-supply
+  - svddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@10 {
+            compatible = "samsung,s5k6a3";
+            reg = <0x10>;
+
+            clocks = <&camera 1>;
+            assigned-clocks = <&camera 1>;
+            assigned-clock-rates = <24000000>;
+
+            clock-names = "extclk";
+            gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+            afvdd-supply = <&ldo19_reg>;
+            svdda-supply = <&cam_io_reg>;
+            svddio-supply = <&ldo19_reg>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csis1_ep>;
+                    data-lanes = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml
new file mode 100644
index 000000000000..20f48d5e9b2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx111.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX111 8MP CMOS Digital Image Sensor
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+description:
+  IMX111 sensor is a Sony CMOS active pixel digital image sensor with an active
+  array size of 2464H x 3280V. It is programmable through I2C interface. Image
+  data is sent through MIPI CSI-2, through 1 or 2 lanes.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+  - $ref: /schemas/nvmem/nvmem-consumer.yaml#
+
+properties:
+  compatible:
+    const: sony,imx111
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: EXTCLK with possible frequency from 6 to 54 MHz
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  iovdd-supply:
+    description: Digital IO power supply (1.8V)
+
+  dvdd-supply:
+    description: Digital power supply (1.2V)
+
+  avdd-supply:
+    description: Analog power supply (2.7V)
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@10 {
+            compatible = "sony,imx111";
+            reg = <0x10>;
+
+            clocks = <&imx111_clk>;
+
+            iovdd-supply = <&camera_vddio_1v8>;
+            dvdd-supply = <&camera_vddd_1v2>;
+            avdd-supply = <&camera_vdda_2v7>;
+
+            orientation = <1>;
+            rotation = <90>;
+
+            nvmem = <&eeprom>;
+            flash-leds = <&led>;
+            lens-focus = <&vcm>;
+
+            reset-gpios = <&gpio 84 GPIO_ACTIVE_LOW>;
+
+            port {
+                imx111_output: endpoint {
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <542400000>;
+                    remote-endpoint = <&csi_input>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
index c9760f895b3e..aea99ebf8e9e 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
@@ -16,7 +16,7 @@ description: |
   maximum throughput of 1.2Gbps/lane.
 
 allOf:
-  - $ref: ../video-interface-devices.yaml#
+  - $ref: /schemas/media/video-interface-devices.yaml#
 
 properties:
   compatible:
@@ -33,20 +33,21 @@ properties:
 
   clock-frequency:
     description: Frequency of the xclk clock in Hz.
+    deprecated: true
 
   enable-gpios:
     description: GPIO descriptor for the enable pin.
     maxItems: 1
 
-  vdddo-supply:
-    description: Chip digital IO regulator (1.8V).
-
   vdda-supply:
     description: Chip analog regulator (2.7V).
 
   vddd-supply:
     description: Chip digital core regulator (1.12V).
 
+  vdddo-supply:
+    description: Chip digital IO regulator (1.8V).
+
   flash-leds: true
   lens-focus: true
 
@@ -84,42 +85,44 @@ required:
   - compatible
   - reg
   - clocks
-  - clock-frequency
   - enable-gpios
-  - vdddo-supply
   - vdda-supply
   - vddd-supply
+  - vdddo-supply
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         camera-sensor@1a {
             compatible = "sony,imx214";
             reg = <0x1a>;
-            vdddo-supply = <&pm8994_lvs1>;
-            vddd-supply = <&camera_vddd_1v12>;
+
+            clocks = <&camera_clk>;
+            assigned-clocks = <&camera_clk>;
+            assigned-clock-rates = <24000000>;
+
+            enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+
             vdda-supply = <&pm8994_l17>;
+            vddd-supply = <&camera_vddd_1v12>;
+            vdddo-supply = <&pm8994_lvs1>;
+
             lens-focus = <&ad5820>;
-            enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
-            clocks = <&camera_clk>;
-            clock-frequency = <24000000>;
 
             port {
                 imx214_ep: endpoint {
                     data-lanes = <1 2 3 4>;
-                    link-frequencies = /bits/ 64 <480000000>;
+                    link-frequencies = /bits/ 64 <600000000>;
                     remote-endpoint = <&csiphy0_ep>;
                 };
             };
         };
     };
-
-...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
new file mode 100644
index 000000000000..38c3759bcd9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx219.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Dave Stevenson <dave.stevenson@raspberrypi.com>
+
+description: |-
+  The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
+  with an active array size of 3280H x 2464V. It is programmable through
+  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
+  Image data is sent through MIPI CSI-2, which is configured as either 2 or
+  4 data lanes.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: sony,imx219
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VDIG-supply:
+    description:
+      Digital I/O voltage supply, 1.8 volts
+
+  VANA-supply:
+    description:
+      Analog voltage supply, 2.8 volts
+
+  VDDL-supply:
+    description:
+      Digital core voltage supply, 1.2 volts
+
+  reset-gpios:
+    maxItems: 1
+    description: |-
+      Reference to the GPIO connected to the xclr pin, if any.
+      Must be released (set high) after all supplies are applied.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            description: |-
+              The sensor supports either two-lane, or four-lane operation.
+              If this property is omitted four-lane operation is assumed.
+              For two-lane operation the property must be set to <1 2>.
+            items:
+              - const: 1
+              - const: 2
+
+          clock-noncontinuous: true
+          link-frequencies: true
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - VANA-supply
+  - VDIG-supply
+  - VDDL-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx219: sensor@10 {
+            compatible = "sony,imx219";
+            reg = <0x10>;
+            clocks = <&imx219_clk>;
+            VANA-supply = <&imx219_vana>;   /* 2.8v */
+            VDIG-supply = <&imx219_vdig>;   /* 1.8v */
+            VDDL-supply = <&imx219_vddl>;   /* 1.2v */
+
+            port {
+                imx219_0: endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                    link-frequencies = /bits/ 64 <456000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
new file mode 100644
index 000000000000..d105bd357dbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx258.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx258.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX258 13 Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |-
+  IMX258 is a diagonal 5.867mm (Type 1/3.06) 13 Mega-pixel CMOS active pixel
+  type stacked image sensor with a square pixel array of size 4208 x 3120. It
+  is programmable through I2C interface.  Image data is sent through MIPI
+  CSI-2. The sensor exists in two different models, a standard variant
+  (IMX258) and a variant with phase detection autofocus (IMX258-PDAF).
+  The camera module does not expose the model through registers, so the
+  exact model needs to be specified.
+
+$ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    enum:
+      - sony,imx258
+      - sony,imx258-pdaf
+
+  clocks:
+    description:
+      Clock frequency from 6 to 27 MHz.
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description: |-
+      Reference to the GPIO connected to the XCLR pin, if any.
+
+  vana-supply:
+    description:
+      Analog voltage (VANA) supply, 2.7 V
+
+  vdig-supply:
+    description:
+      Digital I/O voltage (VDIG) supply, 1.2 V
+
+  vif-supply:
+    description:
+      Interface voltage (VIF) supply, 1.8 V
+
+  # See ../video-interfaces.txt for more details
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@6c {
+            compatible = "sony,imx258";
+            reg = <0x6c>;
+            clocks = <&imx258_clk>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <320000000>;
+                };
+            };
+        };
+    };
+
+    /* Oscillator on the camera board */
+    imx258_clk: clk {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <19200000>;
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@6c {
+            compatible = "sony,imx258";
+            reg = <0x6c>;
+            clocks = <&imx258_clk>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <633600000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
index 4271fc3cc623..b06a6e75ba97 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
@@ -46,19 +46,23 @@ properties:
 required:
   - compatible
   - reg
+  - clocks
+  - clock-names
   - port
 
 additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         imx274: camera-sensor@1a {
             compatible = "sony,imx274";
             reg = <0x1a>;
+            clocks = <&imx274_clk>;
+            clock-names = "inck";
             reset-gpios = <&gpio_sensor 0 0>;
 
             port {
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
new file mode 100644
index 000000000000..e4f49f1435a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx283.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2024 Ideas on Board Oy
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx283.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX283 Sensor
+
+maintainers:
+  - Kieran Bingham <kieran.bingham@ideasonboard.com>
+  - Umang Jain <umang.jain@ideasonboard.com>
+
+description:
+  IMX283 sensor is a Sony CMOS active pixel digital image sensor with an active
+  array size of 5472H x 3648V. It is programmable through I2C interface. The
+  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+  sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    const: sony,imx283
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Clock frequency from 6 to 24 MHz.
+    maxItems: 1
+
+  vadd-supply:
+    description: Analog power supply (2.9V)
+
+  vdd1-supply:
+    description: Interface power supply (1.8V)
+
+  vdd2-supply:
+    description: Digital power supply (1.2V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@1a {
+            compatible = "sony,imx283";
+            reg = <0x1a>;
+            clocks = <&imx283_clk>;
+
+            assigned-clocks = <&imx283_clk>;
+            assigned-clock-parents = <&imx283_clk_parent>;
+            assigned-clock-rates = <12000000>;
+
+            vadd-supply = <&camera_vadd_2v9>;
+            vdd1-supply = <&camera_vdd1_1v8>;
+            vdd2-supply = <&camera_vdd2_1v2>;
+
+            port {
+                imx283: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <360000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
new file mode 100644
index 000000000000..484039671cd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX290 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square
+  Pixel, available in either mono or colour variants. It is programmable
+  through I2C and 4-wire interfaces.
+
+  The sensor output is available via CMOS logic parallel SDR output, Low voltage
+  LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the default.
+  No bindings have been defined for the other busses.
+
+  imx290lqr is the full model identifier for the colour variant. "sony,imx290"
+  is treated the same as this as it was the original compatible string.
+  imx290llr is the mono version of the sensor.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - sony,imx290lqr # Colour
+          - sony,imx290llr # Monochrome
+          - sony,imx327lqr # Colour
+          - sony,imx462lqr # Colour
+          - sony,imx462llr # Monochrome
+      - const: sony,imx290
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: Input clock (37.125 MHz or 74.25 MHz)
+    items:
+      - const: xclk
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz
+    deprecated: true
+
+  vdda-supply:
+    description: Analog power supply (2.9V)
+
+  vddd-supply:
+    description: Digital core power supply (1.2V)
+
+  vdddo-supply:
+    description: Digital I/O power supply (1.8V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vdda-supply
+  - vddd-supply
+  - vdddo-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx290: camera-sensor@1a {
+            compatible = "sony,imx290lqr";
+            reg = <0x1a>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&camera_rear_default>;
+
+            clocks = <&gcc 90>;
+            clock-names = "xclk";
+            assigned-clocks = <&clks 1>;
+            assigned-clock-rates = <37125000>;
+
+            vdddo-supply = <&camera_vdddo_1v8>;
+            vdda-supply = <&camera_vdda_2v8>;
+            vddd-supply = <&camera_vddd_1v5>;
+
+            reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+
+            port {
+                imx290_ep: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <222750000 148500000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
new file mode 100644
index 000000000000..65ad9c100e45
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx296.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
+  sensor with square pixel array and 1.58 M effective pixels. This chip
+  features a global shutter with variable charge-integration time. It is
+  programmable through I2C and 4-wire interfaces. The sensor output is
+  available via CSI-2 serial data output (1 Lane).
+
+properties:
+  compatible:
+    enum:
+      - sony,imx296
+      - sony,imx296ll
+      - sony,imx296lq
+    description:
+      The IMX296 sensor exists in two different models, a colour variant
+      (IMX296LQ) and a monochrome variant (IMX296LL). The device exposes the
+      model through registers, allowing for auto-detection with a common
+      "sony,imx296" compatible string. However, some camera modules disable the
+      ability to read the sensor model register, which disables this feature.
+      In those cases, the exact model needs to be specified as "sony,imx296ll"
+      or "sony,imx296lq".
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: Input clock (37.125 MHz, 54 MHz or 74.25 MHz)
+    items:
+      - const: inck
+
+  avdd-supply:
+    description: Analog power supply (3.3V)
+
+  dvdd-supply:
+    description: Digital power supply (1.2V)
+
+  ovdd-supply:
+    description: Interface power supply (1.8V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - avdd-supply
+  - dvdd-supply
+  - ovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx296: camera-sensor@1a {
+            compatible = "sony,imx296";
+            reg = <0x1a>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&camera_rear_default>;
+
+            clocks = <&gcc 90>;
+            clock-names = "inck";
+
+            avdd-supply = <&camera_vdda_3v3>;
+            dvdd-supply = <&camera_vddd_1v2>;
+            ovdd-supply = <&camera_vddo_1v8>;
+
+            reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+
+            port {
+                imx296_ep: endpoint {
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
index f5055b9db693..3842e5130463 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
@@ -24,10 +24,6 @@ properties:
     description: I2C address
     maxItems: 1
 
-  assigned-clocks: true
-  assigned-clock-parents: true
-  assigned-clock-rates: true
-
   clocks:
     description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
     maxItems: 1
@@ -65,7 +61,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -74,15 +70,11 @@ examples:
             reg = <0x1a>;
             clocks = <&imx334_clk>;
 
-            assigned-clocks = <&imx334_clk>;
-            assigned-clock-parents = <&imx334_clk_parent>;
-            assigned-clock-rates = <24000000>;
-
             port {
                 imx334: endpoint {
                     remote-endpoint = <&cam>;
                     data-lanes = <1 2 3 4>;
-                    link-frequencies = /bits/ 64 <891000000>;
+                    link-frequencies = /bits/ 64 <891000000 445500000>;
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
index cf2ca2702cc9..80f879b6bd01 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
@@ -24,14 +24,19 @@ properties:
     description: I2C address
     maxItems: 1
 
-  assigned-clocks: true
-  assigned-clock-parents: true
-  assigned-clock-rates: true
-
   clocks:
     description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
     maxItems: 1
 
+  avdd-supply:
+    description: Analog power supply (2.9V)
+
+  ovdd-supply:
+    description: Interface power supply (1.8V)
+
+  dvdd-supply:
+    description: Digital power supply (1.2V)
+
   reset-gpios:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1
@@ -66,7 +71,9 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -75,9 +82,11 @@ examples:
             reg = <0x1a>;
             clocks = <&imx335_clk>;
 
-            assigned-clocks = <&imx335_clk>;
-            assigned-clock-parents = <&imx335_clk_parent>;
-            assigned-clock-rates = <24000000>;
+            avdd-supply = <&camera_vdda_2v9>;
+            ovdd-supply = <&camera_vddo_1v8>;
+            dvdd-supply = <&camera_vddd_1v2>;
+
+            reset-gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
 
             port {
                 imx335: endpoint {
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
index afcf70947f7e..5447ab0768a6 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
@@ -19,19 +19,26 @@ description:
 
 properties:
   compatible:
-    const: sony,imx412
+    enum:
+      - sony,imx412
+      - sony,imx577
   reg:
     description: I2C address
     maxItems: 1
 
-  assigned-clocks: true
-  assigned-clock-parents: true
-  assigned-clock-rates: true
-
   clocks:
     description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz
     maxItems: 1
 
+  dovdd-supply:
+    description: Interface power supply.
+
+  avdd-supply:
+    description: Analog power supply.
+
+  dvdd-supply:
+    description: Digital power supply.
+
   reset-gpios:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1
@@ -66,7 +73,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -75,10 +82,6 @@ examples:
             reg = <0x1a>;
             clocks = <&imx412_clk>;
 
-            assigned-clocks = <&imx412_clk>;
-            assigned-clock-parents = <&imx412_clk_parent>;
-            assigned-clock-rates = <24000000>;
-
             port {
                 imx412: endpoint {
                     remote-endpoint = <&cam>;
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
new file mode 100644
index 000000000000..7c11e871dca6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx415.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX415 CMOS Image Sensor
+
+maintainers:
+  - Michael Riesch <michael.riesch@collabora.com>
+
+description: |-
+  The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type
+  solid-state image sensor with a square pixel array and 8.46 M effective
+  pixels. This chip operates with analog 2.9 V, digital 1.1 V, and interface
+  1.8 V triple power supply, and has low power consumption.
+  The IMX415 is programmable through I2C interface. The sensor output is
+  available via CSI-2 serial data output (two or four lanes).
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: sony,imx415
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Input clock (24 MHz, 27 MHz, 37.125 MHz, 72 MHz or 74.25 MHz)
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply (2.9 V)
+
+  dvdd-supply:
+    description: Digital power supply (1.1 V)
+
+  ovdd-supply:
+    description: Interface power supply (1.8 V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - avdd-supply
+  - dvdd-supply
+  - ovdd-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx415: camera-sensor@1a {
+            compatible = "sony,imx415";
+            reg = <0x1a>;
+            avdd-supply = <&vcc2v9_cam>;
+            clocks = <&clock_cam>;
+            dvdd-supply = <&vcc1v1_cam>;
+            lens-focus = <&vcm>;
+            orientation = <2>;
+            ovdd-supply = <&vcc1v8_cam>;
+            reset-gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>;
+            rotation = <180>;
+
+            port {
+                imx415_ep: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <445500000>;
+                    remote-endpoint = <&mipi_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
deleted file mode 100644
index 7976e6c40a80..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
-
-MIPID02 has two CSI-2 input ports, only one of those ports can be active at a
-time. Active port input stream will be de-serialized and its content outputted
-through PARALLEL output port.
-CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2 second
-input port is a single lane 800Mbps. Both ports support clock and data lane
-polarity swap. First port also supports data lane swap.
-PARALLEL output port has a maximum width of 12 bits.
-Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888, RGB444,
-YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
-
-Required Properties:
-- compatible: shall be "st,st-mipid02"
-- clocks: reference to the xclk input clock.
-- clock-names: shall be "xclk".
-- VDDE-supply: sensor digital IO supply. Must be 1.8 volts.
-- VDDIN-supply: sensor internal regulator supply. Must be 1.8 volts.
-
-Optional Properties:
-- reset-gpios: reference to the GPIO connected to the xsdn pin, if any.
-	       This is an active low signal to the mipid02.
-
-Required subnodes:
-  - ports: A ports node with one port child node per device input and output
-	   port, in accordance with the video interface bindings defined in
-	   Documentation/devicetree/bindings/media/video-interfaces.txt. The
-	   port nodes are numbered as follows:
-
-	   Port Description
-	   -----------------------------
-	   0    CSI-2 first input port
-	   1    CSI-2 second input port
-	   2    PARALLEL output
-
-Endpoint node required property for CSI-2 connection is:
-- data-lanes: shall be <1> for Port 1. for Port 0 dual-lane operation shall be
-<1 2> or <2 1>. For Port 0 single-lane operation shall be <1> or <2>.
-Endpoint node optional property for CSI-2 connection is:
-- lane-polarities: any lane can be inverted or not.
-
-Endpoint node required property for PARALLEL connection is:
-- bus-width: shall be set to <6>, <7>, <8>, <10> or <12>.
-Endpoint node optional properties for PARALLEL connection are:
-- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
-LOW being the default.
-- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
-LOW being the default.
-
-Example:
-
-mipid02: csi2rx@14 {
-	compatible = "st,st-mipid02";
-	reg = <0x14>;
-	status = "okay";
-	clocks = <&clk_ext_camera_12>;
-	clock-names = "xclk";
-	VDDE-supply = <&vdd>;
-	VDDIN-supply = <&vdd>;
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-
-			ep0: endpoint {
-				data-lanes = <1 2>;
-				remote-endpoint = <&mipi_csi2_in>;
-			};
-		};
-		port@2 {
-			reg = <2>;
-
-			ep2: endpoint {
-				bus-width = <8>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				remote-endpoint = <&parallel_out>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
new file mode 100644
index 000000000000..4d40e75b4e1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-mipid02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description:
+  MIPID02 has two CSI-2 input ports, only one of those ports can be
+  active at a time. Active port input stream will be de-serialized
+  and its content outputted through PARALLEL output port.
+  CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2
+  second input port is a single lane 800Mbps. Both ports support clock
+  and data lane polarity swap. First port also supports data lane swap.
+  PARALLEL output port has a maximum width of 12 bits.
+  Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888,
+  RGB444, YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
+
+properties:
+  compatible:
+    const: st,st-mipid02
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xclk
+
+  VDDE-supply:
+    description:
+      Sensor digital IO supply. Must be 1.8 volts.
+
+  VDDIN-supply:
+    description:
+      Sensor internal regulator supply. Must be 1.8 volts.
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the xsdn pin, if any.
+      This is an active low signal to the mipid02.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 first input port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Single-lane operation shall be <1> or <2> .
+                  Dual-lane operation shall be <1 2> or <2 1> .
+                minItems: 1
+                maxItems: 2
+
+              lane-polarities:
+                description:
+                  Any lane can be inverted or not.
+                minItems: 1
+                maxItems: 3
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 second input port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Single-lane operation shall be <1> or <2> .
+                maxItems: 1
+
+              lane-polarities:
+                description:
+                  Any lane can be inverted or not.
+                maxItems: 1
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-width:
+                enum: [6, 7, 8, 10, 12]
+
+            required:
+              - bus-width
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+    required:
+      - port@2
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - VDDE-supply
+  - VDDIN-supply
+  - ports
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        mipid02: csi2rx@14 {
+            compatible = "st,st-mipid02";
+            reg = <0x14>;
+            clocks = <&clk_ext_camera_12>;
+            clock-names = "xclk";
+            VDDE-supply = <&vdd>;
+            VDDIN-supply = <&vdd>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+
+                    ep0: endpoint {
+                        data-lanes = <1 2>;
+                        remote-endpoint = <&mipi_csi2_in>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+
+                    ep2: endpoint {
+                        bus-width = <8>;
+                        hsync-active = <0>;
+                        vsync-active = <0>;
+                        remote-endpoint = <&parallel_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
new file mode 100644
index 000000000000..8c28848b226a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2022 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+  STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a
+  quad lanes 800Mbps per lane.
+  Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16.
+  Following part number are supported
+  - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors.
+  Maximum frame rate is 75 fps.
+  - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors.
+  Maximum frame rate is 60 fps.
+
+properties:
+  compatible:
+    const: st,st-vgxy61
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VCORE-supply:
+    description:
+      Sensor digital core supply. Must be 1.2 volts.
+
+  VDDIO-supply:
+    description:
+      Sensor digital IO supply. Must be 1.8 volts.
+
+  VANA-supply:
+    description:
+      Sensor analog supply. Must be 2.8 volts.
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the reset pin, if any.
+      This is an active low signal to the vgxy61.
+
+  st,strobe-gpios-polarity:
+    description:
+      Invert polarity of illuminator's lights strobe GPIOs.
+      These GPIOs directly drive the illuminator LEDs.
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            description:
+              CSI lanes to use
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+          remote-endpoint: true
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - clocks
+  - VCORE-supply
+  - VDDIO-supply
+  - VANA-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        vgxy61: csi2tx@10 {
+            compatible = "st,st-vgxy61";
+            reg = <0x10>;
+            clocks = <&clk_ext_camera>;
+            VCORE-supply = <&v1v2>;
+            VDDIO-supply = <&v1v8>;
+            VANA-supply = <&v2v8>;
+            reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>;
+            port {
+                ep0: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&mipi_csi2_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml b/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
new file mode 100644
index 000000000000..060ac6829b66
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2025 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,vd55g1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VD55G1 Global Shutter Image Sensor
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+ The STMicroelectronics VD55G1 is a global shutter image sensor with an active
+ array size of 804H x 704V. It is programmable through I2C interface. The I2C
+ address is fixed to 0x10.
+
+ Image data is sent through MIPI CSI-2, which is configured as only 1 data
+ lane. The sensor provides 4 GPIOS that can be used for external LED signal
+ (synchronized with sensor integration periods).
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,vd55g1
+      - st,vd65g4
+    description:
+      VD55G1 is the monochrome variant, while VD65G4 is the color one.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vcore-supply:
+    description: Digital core power supply (1.15V)
+
+  vddio-supply:
+    description: Digital IO power supply (1.8V)
+
+  vana-supply:
+    description: Analog power supply (2.8V)
+
+  reset-gpios:
+    description: Sensor reset active low GPIO (XSHUTDOWN)
+    maxItems: 1
+
+  st,leds:
+    description:
+      List sensor's GPIOs used to control strobe light sources during exposure
+      time. The numbers identify the sensor pin on which the illumination
+      system is connected. GPIOs are active-high.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      minimum: 0
+      maximum: 3
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+
+          link-frequencies:
+            maxItems: 1
+            items:
+              minimum: 125000000
+              maximum: 600000000
+
+          lane-polarities:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vcore-supply
+  - vddio-supply
+  - vana-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@10 {
+            compatible = "st,vd55g1";
+            reg = <0x10>;
+
+            clocks = <&camera_clk_12M>;
+
+            vcore-supply = <&camera_vcore_v1v15>;
+            vddio-supply = <&camera_vddio_v1v8>;
+            vana-supply = <&camera_vana_v2v8>;
+
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            st,leds = <2>;
+
+            orientation = <2>;
+            rotation = <0>;
+
+            port {
+                endpoint {
+                    data-lanes = <1>;
+                    link-frequencies = /bits/ 64 <600000000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml b/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml
new file mode 100644
index 000000000000..c6673b8539db
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2024 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,vd56g3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VD56G3 Global Shutter Image Sensor
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+  The STMicroelectronics VD56G3 is a 1.5 M pixel global shutter image sensor
+  with an active array size of 1124 x 1364 (portrait orientation). It is
+  programmable through I2C, the address is fixed to 0x10. The sensor output is
+  available via CSI-2, which is configured as either 1 or 2 data lanes. The
+  sensor provides 8 GPIOS that can be used for external LED signal
+  (synchronized with sensor integration periods)
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,vd56g3
+      - st,vd66gy
+    description:
+      Two variants are availables; VD56G3 is a monochrome sensor while VD66GY
+      is a colour variant.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vcore-supply:
+    description: Digital core power supply (1.15V)
+
+  vddio-supply:
+    description: Digital IO power supply (1.8V)
+
+  vana-supply:
+    description: Analog power supply (2.8V)
+
+  reset-gpios:
+    description: Sensor reset active low GPIO (XSHUTDOWN)
+    maxItems: 1
+
+  st,leds:
+    description:
+      List sensor's GPIOs used to control strobe light sources during exposure
+      time. The numbers identify the sensor pin on which the illumination system
+      is connected. GPIOs are active-high.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 7
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+          link-frequencies:
+            maxItems: 1
+            items:
+              enum: [402000000, 750000000]
+
+          lane-polarities:
+            minItems: 1
+            maxItems: 3
+            description: Any lane can be inverted or not.
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vcore-supply
+  - vddio-supply
+  - vana-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-sensor@10 {
+            compatible = "st,vd56g3";
+            reg = <0x10>;
+
+            clocks = <&camera_clk_12M>;
+
+            vcore-supply = <&camera_vcore_v1v15>;
+            vddio-supply = <&camera_vddio_v1v8>;
+            vana-supply = <&camera_vana_v2v8>;
+
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            st,leds = <6>;
+
+            orientation = <2>;
+            rotation = <0>;
+
+            port {
+                endpoint {
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <402000000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/tda1997x.txt b/Documentation/devicetree/bindings/media/i2c/tda1997x.txt
deleted file mode 100644
index e76167999d76..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/tda1997x.txt
+++ /dev/null
@@ -1,178 +0,0 @@
-Device-Tree bindings for the NXP TDA1997x HDMI receiver
-
-The TDA19971/73 are HDMI video receivers.
-
-The TDA19971 Video port output pins can be used as follows:
- - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4]
- - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4]
- - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4]
- - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2]
- - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0]
- - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles)
- - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles)
- - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles)
-
-The TDA19973 Video port output pins can be used as follows:
- - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0]
- - YUV444 12bit per color (36 bits total): Y[11:0] Cb[11:0] Cr[11:0]
- - YUV422 semi-planar 12bit per component (24 bits total): Y[11:0] CbCr[11:0]
- - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles)
-
-The Video port output pins are mapped via 4-bit 'pin groups' allowing
-for a variety of connection possibilities including swapping pin order within
-pin groups. The video_portcfg device-tree property consists of register mapping
-pairs which map a chip-specific VP output register to a 4-bit pin group. If
-the pin group needs to be bit-swapped you can use the *_S pin-group defines.
-
-Required Properties:
- - compatible          :
-  - "nxp,tda19971" for the TDA19971
-  - "nxp,tda19973" for the TDA19973
- - reg                 : I2C slave address
- - interrupts          : The interrupt number
- - DOVDD-supply        : Digital I/O supply
- - DVDD-supply         : Digital Core supply
- - AVDD-supply         : Analog supply
- - nxp,vidout-portcfg  : array of pairs mapping VP output pins to pin groups.
-
-Optional Properties:
- - nxp,audout-format   : DAI bus format: "i2s" or "spdif".
- - nxp,audout-width    : width of audio output data bus (1-4).
- - nxp,audout-layout   : data layout (0=AP0 used, 1=AP0/AP1/AP2/AP3 used).
- - nxp,audout-mclk-fs  : Multiplication factor between stream rate and codec
-                         mclk.
-
-The port node shall contain one endpoint child node for its digital
-output video port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Optional Endpoint Properties:
-  The following three properties are defined in video-interfaces.txt and
-  are valid for the output parallel bus endpoint:
-  - hsync-active: Horizontal synchronization polarity. Defaults to active high.
-  - vsync-active: Vertical synchronization polarity. Defaults to active high.
-  - data-active: Data polarity. Defaults to active high.
-
-Examples:
- - VP[15:0] connected to IMX6 CSI_DATA[19:4] for 16bit YUV422
-   16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins)
-	hdmi-receiver@48 {
-		compatible = "nxp,tda19971";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tda1997x>;
-		reg = <0x48>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		DOVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_1p8v>;
-		DVDD-supply = <&reg_1p8v>;
-		/* audio */
-		#sound-dai-cells = <0>;
-		nxp,audout-format = "i2s";
-		nxp,audout-layout = <0>;
-		nxp,audout-width = <16>;
-		nxp,audout-mclk-fs = <128>;
-		/*
-		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
-		 * and Y[11:4] across 16bits in the same pixclk cycle.
-		 */
-		nxp,vidout-portcfg =
-			/* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */
-			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
-			/* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */
-			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
-			/* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */
-			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
-			/* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */
-			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
-
-		port {
-			tda1997x_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <16>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				data-active = <1>;
-			};
-		};
-	};
- - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656
-   16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins)
-	hdmi-receiver@48 {
-		compatible = "nxp,tda19971";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tda1997x>;
-		reg = <0x48>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		DOVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_1p8v>;
-		DVDD-supply = <&reg_1p8v>;
-		/* audio */
-		#sound-dai-cells = <0>;
-		nxp,audout-format = "i2s";
-		nxp,audout-layout = <0>;
-		nxp,audout-width = <16>;
-		nxp,audout-mclk-fs = <128>;
-		/*
-		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
-		 * and Y[11:4] across 16bits in the same pixclk cycle.
-		 */
-		nxp,vidout-portcfg =
-			/* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */
-			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
-			/* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */
-			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
-			/* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */
-			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
-			/* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */
-			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
-
-		port {
-			tda1997x_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <16>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				data-active = <1>;
-			};
-		};
-	};
- - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656
-   16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins)
-	hdmi-receiver@48 {
-		compatible = "nxp,tda19971";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tda1997x>;
-		reg = <0x48>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-		DOVDD-supply = <&reg_3p3v>;
-		AVDD-supply = <&reg_1p8v>;
-		DVDD-supply = <&reg_1p8v>;
-		/* audio */
-		#sound-dai-cells = <0>;
-		nxp,audout-format = "i2s";
-		nxp,audout-layout = <0>;
-		nxp,audout-width = <16>;
-		nxp,audout-mclk-fs = <128>;
-		/*
-		 * The 8bpp BT656 mode outputs YCbCr[11:4] across 8bits over
-		 * 2 pixclk cycles.
-		 */
-		nxp,vidout-portcfg =
-			/* YCbCr[11:8]<->VP[15:12]<->CSI_DATA[19:16] */
-			< TDA1997X_VP24_V15_12 TDA1997X_R_CR_CBCR_11_8 >,
-			/* YCbCr[7:4]<->VP[11:08]<->CSI_DATA[15:12] */
-			< TDA1997X_VP24_V11_08 TDA1997X_R_CR_CBCR_7_4 >,
-
-		port {
-			tda1997x_to_ipu1_csi0_mux: endpoint {
-				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
-				bus-width = <16>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				data-active = <1>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
new file mode 100644
index 000000000000..0592d0b9af92
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/techwell,tw9900.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Techwell TW9900 NTSC/PAL video decoder
+
+maintainers:
+  - Mehdi Djait <mehdi.djait@bootlin.com>
+
+description:
+  The tw9900 is a multi-standard video decoder, supporting NTSC, PAL standards
+  with auto-detection features.
+
+properties:
+  compatible:
+    const: techwell,tw9900
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD power supply
+
+  reset-gpios:
+    description: GPIO descriptor for the RESET input pin
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO descriptor for the POWERDOWN input pin
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Analog input port
+
+        properties:
+          endpoint@0:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: CVBS over MUX0
+
+          endpoint@1:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: CVBS over MUX1
+
+          endpoint@2:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Chroma over CIN0 and Y over MUX0
+
+          endpoint@3:
+            $ref: /schemas/graph.yaml#/properties/endpoint
+            description: Chroma over CIN0 and Y over MUX1
+
+        oneOf:
+          - required:
+              - endpoint@0
+          - required:
+              - endpoint@1
+          - required:
+              - endpoint@2
+          - required:
+              - endpoint@3
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for the decoder output.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - ports
+  - reg
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/sdtv-standards.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    composite_connector {
+        compatible = "composite-video-connector";
+        label = "tv";
+        sdtv-standards = <(SDTV_STD_PAL | SDTV_STD_NTSC)>;
+
+        port {
+            composite_to_tw9900: endpoint {
+                remote-endpoint = <&tw9900_to_composite>;
+            };
+        };
+    };
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        video-decoder@44 {
+            compatible = "techwell,tw9900";
+            reg = <0x44>;
+
+            vdd-supply = <&tw9900_supply>;
+            reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    reg = <0>;
+                    tw9900_to_composite: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&composite_to_tw9900>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&cif_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
new file mode 100644
index 000000000000..bc339a7374b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/thine,thp7312.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Ideas on Board
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/thine,thp7312.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: THine THP7312
+
+maintainers:
+  - Paul Elder <paul.elder@@ideasonboard.com>
+
+description:
+  The THP7312 is a standalone ISP controlled over i2c, and is capable of
+  various image processing and correction functions, including 3A control. It
+  can be connected to CMOS image sensors from various vendors, supporting both
+  MIPI CSI-2 and parallel interfaces. It can also output on either MIPI CSI-2
+  or parallel. The hardware is capable of transmitting and receiving MIPI
+  interleaved data streams with data types or multiple virtual channel
+  identifiers.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: thine,thp7312
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: CLKI clock input
+
+  thine,boot-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1
+    default: 1
+    description:
+      Boot mode of the THP7312, reflecting the value of the BOOT[0] pin strap.
+      0 is for the SPI/2-wire slave boot, 1 is for the SPI master boot (from
+      external flash ROM).
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the RESET_N pin, if any.
+      Must be released (set high) after all supplies are applied.
+
+  vddcore-supply:
+    description:
+      1.2V supply for core, PLL, MIPI rx and MIPI tx.
+
+  vhtermrx-supply:
+    description:
+      Supply for input (RX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
+
+  vddtx-supply:
+    description:
+      Supply for output (TX). 1.8V for MIPI, or 1.8/2.8/3.3V for parallel.
+
+  vddhost-supply:
+    description:
+      Supply for host interface. 1.8V, 2.8V, or 3.3V.
+
+  vddcmos-supply:
+    description:
+      Supply for sensor interface. 1.8V, 2.8V, or 3.3V.
+
+  vddgpio-0-supply:
+    description:
+      Supply for GPIO_0. 1.8V, 2.8V, or 3.3V.
+
+  vddgpio-1-supply:
+    description:
+      Supply for GPIO_1. 1.8V, 2.8V, or 3.3V.
+
+  orientation: true
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            const: 4 # CSI-2 D-PHY
+
+          data-lanes:
+            description:
+              This property is for lane reordering between the THP7312 and the
+              SoC. The sensor supports either two-lane, or four-lane operation.
+              If this property is omitted four-lane operation is assumed. For
+              two-lane operation the property must be set to <1 2>.
+            minItems: 2
+            maxItems: 4
+            items:
+              maximum: 4
+
+  sensors:
+    type: object
+    description: List of connected sensors
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^sensor@[01]$":
+        type: object
+        description:
+          Sensors connected to the first and second input, with one node per
+          sensor.
+
+        properties:
+          thine,model:
+            $ref: /schemas/types.yaml#/definitions/string
+            description:
+              Model of the connected sensors. Must be a valid compatible string.
+
+          reg:
+            description: THP7312 input port number
+            items:
+              - maximum: 1
+
+          data-lanes:
+            $ref: /schemas/media/video-interfaces.yaml#/properties/data-lanes
+            maxItems: 4
+            description:
+              This property is for lane reordering between the THP7312 and the imaging
+              sensor that it is connected to.
+
+        required:
+          - reg
+          - data-lanes
+
+        additionalProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - clocks
+  - vddcore-supply
+  - vhtermrx-supply
+  - vddtx-supply
+  - vddhost-supply
+  - vddcmos-supply
+  - vddgpio-0-supply
+  - vddgpio-1-supply
+  - sensors
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@61 {
+            compatible = "thine,thp7312";
+            reg = <0x61>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam1_pins_default>;
+
+            reset-gpios = <&pio 119 GPIO_ACTIVE_LOW>;
+            clocks = <&camera61_clk>;
+
+            vddcore-supply = <&vsys_v4p2>;
+            vhtermrx-supply = <&vsys_v4p2>;
+            vddtx-supply = <&vsys_v4p2>;
+            vddhost-supply = <&vsys_v4p2>;
+            vddcmos-supply = <&vsys_v4p2>;
+            vddgpio-0-supply = <&vsys_v4p2>;
+            vddgpio-1-supply = <&vsys_v4p2>;
+
+            orientation = <0>;
+            rotation = <0>;
+
+            sensors {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                sensor@0 {
+                    thine,model = "sony,imx258";
+                    reg = <0>;
+
+                    data-lanes = <4 1 3 2>;
+                };
+            };
+
+            port {
+                thp7312_2_endpoint: endpoint {
+                    remote-endpoint = <&mipi_thp7312_2>;
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                    data-lanes = <4 2 1 3>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml
new file mode 100644
index 000000000000..f6612bb0f667
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub913.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DS90UB913 FPD-Link III Serializer
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+
+description:
+  The TI DS90UB913 is an FPD-Link III video serializer for parallel video.
+
+properties:
+  compatible:
+    enum:
+      - ti,ds90ub913a-q1
+
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is the GPO pin number, second cell is the flags. The GPO pin
+      number must be in range of [0, 3]. Note that GPOs 2 and 3 are not
+      available in external oscillator mode.
+
+  gpio-controller: true
+
+  clocks:
+    maxItems: 1
+    description:
+      Reference clock connected to the CLKIN pin.
+
+  clock-names:
+    items:
+      - const: clkin
+
+  '#clock-cells':
+    const: 0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Parallel input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            required:
+              - pclk-sample
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+        description: FPD-Link III output port
+
+    required:
+      - port@0
+      - port@1
+
+  i2c:
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - '#gpio-cells'
+  - gpio-controller
+  - '#clock-cells'
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    serializer {
+      compatible = "ti,ds90ub913a-q1";
+
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      clocks = <&clk_cam_48M>;
+      clock-names = "clkin";
+
+      #clock-cells = <0>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          ub913_in: endpoint {
+            remote-endpoint = <&sensor_out>;
+            pclk-sample = <1>;
+          };
+        };
+
+        port@1 {
+          reg = <1>;
+          endpoint {
+            remote-endpoint = <&deser_fpd_in>;
+          };
+        };
+      };
+
+      i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@48 {
+          compatible = "aptina,mt9v111";
+          reg = <0x48>;
+
+          clocks = <&fixed_clock>;
+
+          port {
+            sensor_out: endpoint {
+              remote-endpoint = <&ub913_in>;
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
new file mode 100644
index 000000000000..2e129bf573b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub953.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DS90UB953 FPD-Link III Serializer
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+
+description:
+  The TI DS90UB953 is an FPD-Link III video serializer for MIPI CSI-2.
+
+properties:
+  compatible:
+    enum:
+      - ti,ds90ub953-q1
+      - ti,ds90ub971-q1
+
+  '#gpio-cells':
+    const: 2
+    description:
+      First cell is the GPIO pin number, second cell is the flags. The GPIO pin
+      number must be in range of [0, 3].
+
+  gpio-controller: true
+
+  clocks:
+    maxItems: 1
+    description:
+      Reference clock connected to the CLKIN pin.
+
+  clock-names:
+    items:
+      - const: clkin
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+    description:
+      The strap I2C address of the serializer. Can be used by the deserializer
+      to communicate over back-channel when the forward-channel is not yet
+      active.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        unevaluatedProperties: false
+        description: FPD-Link III output port
+
+    required:
+      - port@0
+      - port@1
+
+  i2c:
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - '#gpio-cells'
+  - gpio-controller
+  - '#clock-cells'
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    link {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      serializer@18 {
+        compatible = "ti,ds90ub953-q1";
+        reg = <0x18>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        #clock-cells = <0>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            ub953_in: endpoint {
+              clock-lanes = <0>;
+              data-lanes = <1 2 3 4>;
+              remote-endpoint = <&sensor_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            endpoint {
+              remote-endpoint = <&deser_fpd_in>;
+            };
+          };
+        };
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          sensor@1a {
+            compatible = "sony,imx274";
+            reg = <0x1a>;
+
+            reset-gpios = <&serializer 0 GPIO_ACTIVE_LOW>;
+
+            clocks = <&serializer>;
+            clock-names = "inck";
+
+            port {
+              sensor_out: endpoint {
+                remote-endpoint = <&ub953_in>;
+              };
+            };
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
new file mode 100644
index 000000000000..0539d52de422
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml
@@ -0,0 +1,441 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ti,ds90ub960.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments DS90UB9XX Family FPD-Link Deserializer Hubs
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+
+description:
+  The TI DS90UB9XX devices are FPD-Link video deserializers with I2C and GPIO
+  forwarding.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-atr.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,ds90ub960-q1
+      - ti,ds90ub9702-q1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Reference clock connected to the REFCLK pin.
+
+  clock-names:
+    items:
+      - const: refclk
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      Specifier for the GPIO connected to the PDB pin.
+
+  i2c-alias-pool:
+    minItems: 1
+    maxItems: 32
+
+  links:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      ti,manual-strobe:
+        type: boolean
+        description:
+          Enable manual strobe position and EQ level
+
+    patternProperties:
+      '^link@[0-3]$':
+        type: object
+        additionalProperties: false
+        properties:
+          reg:
+            description: The link number
+            maxItems: 1
+
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
+          i2c-alias:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              The I2C address used for the serializer. Transactions to this
+              address on the I2C bus where the deserializer resides are
+              forwarded to the serializer.
+
+          ti,rx-mode:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum:
+              - 0 # RAW10
+              - 1 # RAW12 HF
+              - 2 # RAW12 LF
+              - 3 # CSI2 SYNC
+              - 4 # CSI2 NON-SYNC
+            description:
+              FPD-Link Input Mode. This should reflect the hardware and the
+              default mode of the connected device.
+
+          ti,cdr-mode:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum:
+              - 0 # FPD-Link III
+              - 1 # FPD-Link IV
+            description:
+              FPD-Link CDR Mode. This should reflect the hardware and the
+              default mode of the connected device.
+
+          ti,strobe-pos:
+            $ref: /schemas/types.yaml#/definitions/int32
+            minimum: -13
+            maximum: 13
+            description: Manual strobe position
+
+          ti,eq-level:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 14
+            description: Manual EQ level
+
+        patternProperties:
+          '^serializer(@[0-9a-f]+)*$':
+            type: object
+            description: FPD-Link Serializer node
+
+        required:
+          - reg
+          - i2c-alias
+          - ti,rx-mode
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: FPD-Link input 0
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            description:
+              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+              hsync-active and vsync-active must be defined.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: FPD-Link input 1
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            description:
+              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+              hsync-active and vsync-active must be defined.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: FPD-Link input 2
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            description:
+              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+              hsync-active and vsync-active must be defined.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: FPD-Link input 3
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            description:
+              Endpoint for FPD-Link port. If the RX mode for this port is RAW,
+              hsync-active and vsync-active must be defined.
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output 0
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+              link-frequencies:
+                maxItems: 1
+
+            required:
+              - data-lanes
+              - link-frequencies
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output 1
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+              link-frequencies:
+                maxItems: 1
+
+            required:
+              - data-lanes
+              - link-frequencies
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+      - port@5
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      clock-frequency = <400000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      deser@3d {
+        compatible = "ti,ds90ub960-q1";
+        reg = <0x3d>;
+
+        clock-names = "refclk";
+        clocks = <&fixed_clock>;
+
+        powerdown-gpios = <&pca9555 7 GPIO_ACTIVE_LOW>;
+
+        i2c-alias-pool = <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          /* Port 0, Camera 0 */
+          port@0 {
+            reg = <0>;
+
+            ub960_fpd3_1_in: endpoint {
+              remote-endpoint = <&ub953_1_out>;
+            };
+          };
+
+          /* Port 1, Camera 1 */
+          port@1 {
+            reg = <1>;
+
+            ub960_fpd3_2_in: endpoint {
+              remote-endpoint = <&ub913_2_out>;
+              hsync-active = <0>;
+              vsync-active = <1>;
+            };
+          };
+
+          /* Port 2, unconnected */
+          port@2 {
+            reg = <2>;
+          };
+
+          /* Port 3, unconnected */
+          port@3 {
+            reg = <3>;
+          };
+
+          /* Port 4, CSI-2 TX */
+          port@4 {
+            reg = <4>;
+            ds90ub960_0_csi_out: endpoint {
+              data-lanes = <1 2 3 4>;
+              link-frequencies = /bits/ 64 <800000000>;
+              remote-endpoint = <&csi2_phy0>;
+            };
+          };
+
+          /* Port 5, unconnected */
+          port@5 {
+            reg = <5>;
+          };
+        };
+
+        links {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          /* Link 0 has DS90UB953 serializer and IMX274 sensor */
+
+          link@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0>;
+            i2c-alias = <0x44>;
+
+            ti,rx-mode = <3>;
+
+            serializer1: serializer@30 {
+              compatible = "ti,ds90ub953-q1";
+              reg = <0x30>;
+
+              gpio-controller;
+              #gpio-cells = <2>;
+
+              #clock-cells = <0>;
+
+              ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                  reg = <0>;
+                  ub953_1_in: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&sensor_1_out>;
+                  };
+                };
+
+                port@1 {
+                  reg = <1>;
+
+                  ub953_1_out: endpoint {
+                    remote-endpoint = <&ub960_fpd3_1_in>;
+                  };
+                };
+              };
+
+              i2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                sensor@1a {
+                  compatible = "sony,imx274";
+                  reg = <0x1a>;
+
+                  clocks = <&serializer>;
+                  clock-names = "inck";
+
+                  reset-gpios = <&serializer1 0 GPIO_ACTIVE_LOW>;
+
+                  port {
+                    sensor_1_out: endpoint {
+                      remote-endpoint = <&ub953_1_in>;
+                    };
+                  };
+                };
+              };
+            };
+          };  /* End of link@0 */
+
+          /* Link 1 has DS90UB913 serializer and MT9V111 sensor */
+
+          link@1 {
+            reg = <1>;
+            i2c-alias = <0x45>;
+
+            ti,rx-mode = <0>;
+
+            serializer2: serializer {
+              compatible = "ti,ds90ub913a-q1";
+
+              gpio-controller;
+              #gpio-cells = <2>;
+
+              clocks = <&clk_cam_48M>;
+              clock-names = "clkin";
+
+              #clock-cells = <0>;
+
+              ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                  reg = <0>;
+                  ub913_2_in: endpoint {
+                    remote-endpoint = <&sensor_2_out>;
+                    pclk-sample = <1>;
+                  };
+                };
+
+                port@1 {
+                  reg = <1>;
+
+                  ub913_2_out: endpoint {
+                    remote-endpoint = <&ub960_fpd3_2_in>;
+                  };
+                };
+              };
+
+              i2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                sensor@48 {
+                  compatible = "aptina,mt9v111";
+                  reg = <0x48>;
+
+                  clocks = <&serializer2>;
+
+                  port {
+                    sensor_2_out: endpoint {
+                      remote-endpoint = <&ub913_2_in>;
+                    };
+                  };
+                };
+              };
+            };
+          }; /* End of link@1 */
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ths8200.txt b/Documentation/devicetree/bindings/media/i2c/ti,ths8200.txt
index 285f6ae7dfa9..285f6ae7dfa9 100644
--- a/Documentation/devicetree/bindings/media/i2c/ths8200.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ti,ths8200.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/ti,tvp514x.txt
index 46752cc71f2e..46752cc71f2e 100644
--- a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ti,tvp514x.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.yaml b/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.yaml
new file mode 100644
index 000000000000..382a29652a05
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ti,tvp5150.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TVP5150 and TVP5151 video decoders
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL
+  (and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV
+  with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats.
+
+properties:
+  compatible:
+    const: ti,tvp5150
+
+  reg:
+    maxItems: 1
+
+  pdn-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      sink port node, AIP1A
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+  port@1:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      sink port node, AIP1B
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+  port@2:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      source port node, Y-OUT
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - port@2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/sdtv-standards.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@5c {
+            compatible = "ti,tvp5150";
+            reg = <0x5c>;
+            pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&composite0_to_tvp5150>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&svideo_luma_to_tvp5150>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&composite1_to_tvp5150>;
+                };
+
+                endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&svideo_chroma_to_tvp5150>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+
+                endpoint {
+                    remote-endpoint = <&ccdc_ep>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt b/Documentation/devicetree/bindings/media/i2c/ti,tvp7002.txt
index 5f28b5d9abcc..5f28b5d9abcc 100644
--- a/Documentation/devicetree/bindings/media/i2c/tvp7002.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ti,tvp7002.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt
index e80d5891b7ed..8d8e40c56872 100644
--- a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt
+++ b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt
@@ -13,9 +13,6 @@ Mandatory properties
 - reg: I2C address (0x3e, or an alternative address)
 - vana-supply: Analogue voltage supply (VANA), 2.8 volts
 - clocks: External clock to the sensor
-- clock-frequency: Frequency of the external clock to the sensor. Camera
-  driver will set this frequency on the external clock. The clock frequency is
-  a pre-determined frequency known to be suitable to the board.
 - reset-gpios: XSHUTDOWN GPIO. The XSHUTDOWN signal is active low. The sensor
   is in hardware standby mode when the signal is in the low state.
 
@@ -43,8 +40,11 @@ Example
 		compatible = "toshiba,et8ek8";
 		reg = <0x3e>;
 		vana-supply = <&vaux4>;
+
 		clocks = <&isp 0>;
-		clock-frequency = <9600000>;
+		assigned-clocks = <&isp 0>;
+		assigned-clock-rates = <9600000>;
+
 		reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
 		port {
 			csi_cam1: endpoint {
diff --git a/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt
index 59102edcf01e..59102edcf01e 100644
--- a/Documentation/devicetree/bindings/media/i2c/tc358743.txt
+++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358743.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
new file mode 100644
index 000000000000..1c476b635b69
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/toshiba,tc358746.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358746 Parallel to MIPI CSI2 Bridge
+
+maintainers:
+  - Marco Felsch <kernel@pengutronix.de>
+
+description: |-
+  The Toshiba TC358746 converts a parallel video stream into a MIPI CSI-2
+  stream. The direction can be either parallel-in -> csi-out or csi-in ->
+  parallel-out The chip is programmable through I2C and SPI but the SPI
+  interface is only supported in parallel-in -> csi-out mode.
+
+  Note that the current device tree bindings only support the
+  parallel-in -> csi-out path.
+
+properties:
+  compatible:
+    const: toshiba,tc358746
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      The phandle to the reference clock source. This corresponds to the
+      hardware pin REFCLK.
+    maxItems: 1
+
+  clock-names:
+    const: refclk
+
+  "#clock-cells":
+    description: |
+      The bridge can act as clock provider for the sensor. To enable this
+      support #clock-cells must be specified. Attention if this feature is used
+      then the mclk rate must be at least: (2 * link-frequency) / 8
+                                           `------------------´   ^
+                                           internal PLL rate   smallest possible
+                                                                   mclk-div
+    const: 0
+
+  clock-output-names:
+    description:
+      The clock name of the MCLK output, the default name is tc358746-mclk.
+    maxItems: 1
+
+  vddc-supply:
+    description: Digital core voltage supply, 1.2 volts
+
+  vddio-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  vddmipi-supply:
+    description: MIPI CSI phy voltage supply, 1.2 volts
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls the chip reset.
+      This corresponds to the hardware pin RESX which is physically active low.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active: true
+              vsync-active: true
+              bus-type:
+                enum: [ 5, 6 ]
+
+            required:
+              - hsync-active
+              - vsync-active
+              - bus-type
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              clock-noncontinuous: true
+              link-frequencies: true
+
+            required:
+              - data-lanes
+              - link-frequencies
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vddc-supply
+  - vddio-supply
+  - vddmipi-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      csi-bridge@e {
+        compatible = "toshiba,tc358746";
+        reg = <0xe>;
+
+        clocks = <&refclk>;
+        clock-names = "refclk";
+
+        reset-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+
+        vddc-supply = <&v1_2d>;
+        vddio-supply = <&v1_8d>;
+        vddmipi-supply = <&v1_2d>;
+
+        /* sensor mclk provider */
+        #clock-cells = <0>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          /* Input */
+          port@0 {
+            reg = <0>;
+            tc358746_in: endpoint {
+              remote-endpoint = <&sensor_out>;
+              hsync-active = <0>;
+              vsync-active = <0>;
+              bus-type = <5>;
+            };
+          };
+
+          /* Output */
+          port@1 {
+            reg = <1>;
+            tc358746_out: endpoint {
+              remote-endpoint = <&mipi_csi2_in>;
+              data-lanes = <1 2>;
+              clock-noncontinuous;
+              link-frequencies = /bits/ 64 <216000000>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
deleted file mode 100644
index 719b2995dc17..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
+++ /dev/null
@@ -1,157 +0,0 @@
-* Texas Instruments TVP5150 and TVP5151 video decoders
-
-The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL
-(and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV
-with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats.
-
-Required Properties:
-====================
-- compatible:	Value must be "ti,tvp5150".
-- reg:		I2C slave address.
-
-Optional Properties:
-====================
-- pdn-gpios:	Phandle for the GPIO connected to the PDN pin, if any.
-- reset-gpios:	Phandle for the GPIO connected to the RESETB pin, if any.
-
-The device node must contain one 'port' child node per device physical input
-and output port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
-are numbered as follows
-
-	  Name		Type		Port
-	--------------------------------------
-	  AIP1A		sink		0
-	  AIP1B		sink		1
-	  Y-OUT		src		2
-
-The device node must contain at least one sink port and the src port. Each input
-port must be linked to an endpoint defined in [1]. The port/connector layout is
-as follows
-
-tvp-5150 port@0 (AIP1A)
-	endpoint@0 -----------> Comp0-Con  port
-	endpoint@1 ------+----> Svideo-Con port
-tvp-5150 port@1 (AIP1B)  |
-	endpoint@1 ------+
-	endpoint@0 -----------> Comp1-Con  port
-tvp-5150 port@2
-	endpoint (video bitstream output at YOUT[0-7] parallel bus)
-
-Required Endpoint Properties for parallel synchronization on output port:
-=========================================================================
-
-- hsync-active:		Active state of the HSYNC signal. Must be <1> (HIGH).
-- vsync-active:		Active state of the VSYNC signal. Must be <1> (HIGH).
-- field-even-active:	Field signal level during the even field data
-			transmission. Must be <0>.
-
-Note: Do not specify any of these properties if you want to use the embedded
-      BT.656 synchronization.
-
-Optional Connector Properties:
-==============================
-
-- sdtv-standards: Set the possible signals to which the hardware tries to lock
-                  instead of using the autodetection mechnism. Please look at
-                  [1] for more information.
-
-[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml.
-
-Example - three input sources:
-#include <dt-bindings/display/sdtv-standards.h>
-
-comp_connector_0 {
-	compatible = "composite-video-connector";
-	label = "Composite0";
-	sdtv-standards = <SDTV_STD_PAL_M>; /* limit to pal-m signals */
-
-	port {
-		composite0_to_tvp5150: endpoint {
-			remote-endpoint = <&tvp5150_to_composite0>;
-		};
-	};
-};
-
-comp_connector_1 {
-	compatible = "composite-video-connector";
-	label = "Composite1";
-	sdtv-standards = <SDTV_STD_NTSC_M>; /* limit to ntsc-m signals */
-
-	port {
-		composite1_to_tvp5150: endpoint {
-			remote-endpoint = <&tvp5150_to_composite1>;
-		};
-	};
-};
-
-svideo_connector {
-	compatible = "svideo-connector";
-	label = "S-Video";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		svideo_luma_to_tvp5150: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&tvp5150_to_svideo_luma>;
-		};
-
-		svideo_chroma_to_tvp5150: endpoint@1 {
-			reg = <1>;
-			remote-endpoint = <&tvp5150_to_svideo_chroma>;
-		};
-	};
-};
-
-&i2c2 {
-	tvp5150@5c {
-		compatible = "ti,tvp5150";
-		reg = <0x5c>;
-		pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
-		reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			tvp5150_to_composite0: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&composite0_to_tvp5150>;
-			};
-
-			tvp5150_to_svideo_luma: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&svideo_luma_to_tvp5150>;
-			};
-		};
-
-		port@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			tvp5150_to_composite1: endpoint@0 {
-				reg = <0>;
-                                remote-endpoint = <&composite1_to_tvp5150>;
-			};
-
-			tvp5150_to_svideo_chroma: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&svideo_chroma_to_tvp5150>;
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			tvp5150_1: endpoint {
-				remote-endpoint = <&ccdc_ep>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
new file mode 100644
index 000000000000..085020cb9e61
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/img,e5010-jpeg-enc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/img,e5010-jpeg-enc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagination E5010 JPEG Encoder
+
+maintainers:
+  - Devarsh Thakkar <devarsht@ti.com>
+
+description: |
+  The E5010 is a JPEG encoder from Imagination Technologies implemented on
+  TI's AM62A SoC. It is capable of real time encoding of YUV420 and YUV422
+  inputs to JPEG and M-JPEG. It supports baseline JPEG Encoding up to
+  8Kx8K resolution.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: ti,am62a-jpeg-enc
+          - const: img,e5010-jpeg-enc
+      - const: img,e5010-jpeg-enc
+
+  reg:
+    items:
+      - description: The E5010 core register region
+      - description: The E5010 mmu register region
+
+  reg-names:
+    items:
+      - const: core
+      - const: mmu
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      jpeg-encoder@fd20000 {
+          compatible = "img,e5010-jpeg-enc";
+          reg = <0x00 0xfd20000 0x00 0x100>,
+                <0x00 0xfd20200 0x00 0x200>;
+          reg-names = "core", "mmu";
+          clocks = <&k3_clks 201 0>;
+          power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+          interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/imx.txt b/Documentation/devicetree/bindings/media/imx.txt
deleted file mode 100644
index 77f4b0a7fd2b..000000000000
--- a/Documentation/devicetree/bindings/media/imx.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Freescale i.MX Media Video Device
-=================================
-
-Video Media Controller node
----------------------------
-
-This is the media controller node for video capture support. It is a
-virtual device that lists the camera serial interface nodes that the
-media device will control.
-
-Required properties:
-- compatible : "fsl,imx-capture-subsystem";
-- ports      : Should contain a list of phandles pointing to camera
-		sensor interface ports of IPU devices
-
-example:
-
-capture-subsystem {
-	compatible = "fsl,imx-capture-subsystem";
-	ports = <&ipu1_csi0>, <&ipu1_csi1>;
-};
-
-
-mipi_csi2 node
---------------
-
-This is the device node for the MIPI CSI-2 Receiver core in the i.MX
-SoC. This is a Synopsys Designware MIPI CSI-2 host controller core
-combined with a D-PHY core mixed into the same register block. In
-addition this device consists of an i.MX-specific "CSI2IPU gasket"
-glue logic, also controlled from the same register block. The CSI2IPU
-gasket demultiplexes the four virtual channel streams from the host
-controller's 32-bit output image bus onto four 16-bit parallel busses
-to the i.MX IPU CSIs.
-
-Required properties:
-- compatible	: "fsl,imx6-mipi-csi2";
-- reg           : physical base address and length of the register set;
-- clocks	: the MIPI CSI-2 receiver requires three clocks: hsi_tx
-		  (the D-PHY clock), video_27m (D-PHY PLL reference
-		  clock), and eim_podf;
-- clock-names	: must contain "dphy", "ref", "pix";
-- port@*        : five port nodes must exist, containing endpoints
-		  connecting to the source and sink devices according to
-		  of_graph bindings. The first port is an input port,
-		  connecting with a MIPI CSI-2 source, and ports 1
-		  through 4 are output ports connecting with parallel
-		  bus sink endpoint nodes and correspond to the four
-		  MIPI CSI-2 virtual channel outputs.
-
-Optional properties:
-- interrupts	: must contain two level-triggered interrupts,
-		  in order: 100 and 101;
diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
index b39b84c5f012..de3e483f146a 100644
--- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
+++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/media/marvell,mmp2-ccic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MMP2 camera host interface bindings
+title: Marvell MMP2 camera host interface
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
@@ -68,6 +68,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/marvell,mmp2.h>
+    #include <dt-bindings/media/video-interfaces.h>
     #include <dt-bindings/power/marvell,mmp2.h>
 
     camera@d420a000 {
@@ -83,7 +84,7 @@ examples:
       port {
         camera0_0: endpoint {
           remote-endpoint = <&ov7670_0>;
-          bus-type = <5>;      /* Parallel */
+          bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
           hsync-active = <1>;  /* Active high */
           vsync-active = <1>;  /* Active high */
           pclk-sample = <0>;   /* Falling */
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml
new file mode 100644
index 000000000000..40fda59fa8a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Film Grain
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  Film Grain (FG) is a Media Data Path 3 (MDP3) component used to add
+  the film grain according to the AOMedia Video 1 (AV1) standard.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8195-mdp3-fg
+      - items:
+          - const: mediatek,mt8188-mdp3-fg
+          - const: mediatek,mt8195-mdp3-fg
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14002000 {
+        compatible = "mediatek,mt8195-mdp3-fg";
+        reg = <0x14002000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_FG>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml
new file mode 100644
index 000000000000..d9f926c20220
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-hdr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 HDR
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  A Media Data Path 3 (MDP3) component used to perform conversion from
+  High Dynamic Range (HDR) to Standard Dynamic Range (SDR).
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8195-mdp3-hdr
+      - items:
+          - const: mediatek,mt8188-mdp3-hdr
+          - const: mediatek,mt8195-mdp3-hdr
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14004000 {
+        compatible = "mediatek,mt8195-mdp3-hdr";
+        reg = <0x14004000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_HDR>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
new file mode 100644
index 000000000000..18603f6c5e06
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Read Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek Read Direct Memory Access(RDMA) component used to do read DMA.
+  It contains one line buffer to store the sufficient pixel data, and
+  must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-mdp3-rdma
+          - mediatek,mt8188-mdp3-rdma
+          - mediatek,mt8195-mdp3-rdma
+          - mediatek,mt8195-vdo1-rdma
+      - items:
+          - const: mediatek,mt8188-vdo1-rdma
+          - const: mediatek,mt8195-vdo1-rdma
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the System Control Processor (SCP) used for initializing
+      and stopping the MDP3, for sending frame data locations to the MDP3's
+      VPU and to install Inter-Processor Interrupt handlers to control
+      processing states.
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA clock
+      - description: RSZ clock
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: used for 1st data pipe from RDMA
+      - description: used for 2nd data pipe from RDMA
+      - description: used for 3rd data pipe from RDMA
+      - description: used for 4th data pipe from RDMA
+      - description: used for the data pipe from SPLIT
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - power-domains
+  - clocks
+  - iommus
+  - '#dma-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mdp3-rdma
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        mboxes:
+          minItems: 2
+
+      required:
+        - mboxes
+        - mediatek,gce-events
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8195-mdp3-rdma
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        mboxes:
+          minItems: 5
+
+      required:
+        - mediatek,gce-events
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8195-vdo1-rdma
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    dma-controller@14001000 {
+        compatible = "mediatek,mt8183-mdp3-rdma";
+        reg = <0x14001000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+                              <CMDQ_EVENT_MDP_RDMA0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+                 <&mmsys CLK_MM_MDP_RSZ1>;
+        iommus = <&iommu>;
+        mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+                 <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
new file mode 100644
index 000000000000..8124c39d73e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rsz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Resizer
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to do frame resizing.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-mdp3-rsz
+      - items:
+          - enum:
+              - mediatek,mt8188-mdp3-rsz
+              - mediatek,mt8195-mdp3-rsz
+          - const: mediatek,mt8183-mdp3-rsz
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_rsz0: mdp3-rsz0@14003000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14003000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ0_SOF>,
+                            <CMDQ_EVENT_MDP_RSZ0_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+    };
+
+    mdp3_rsz1: mdp3-rsz1@14004000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14004000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ1_SOF>,
+                            <CMDQ_EVENT_MDP_RSZ1_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml
new file mode 100644
index 000000000000..1d8e7e202c42
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-stitch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 STITCH
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  One of Media Data Path 3 (MDP3) components used to combine multiple video frame
+  with overlapping fields of view to produce a segmented panorame.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8195-mdp3-stitch
+      - items:
+          - const: mediatek,mt8188-mdp3-stitch
+          - const: mediatek,mt8195-mdp3-stitch
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14003000 {
+        compatible = "mediatek,mt8195-mdp3-stitch";
+        reg = <0x14003000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_STITCH>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml
new file mode 100644
index 000000000000..6cff7c073ce4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-tcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Tone Curve Conversion
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  Tone Curve Conversion (TCC) is one of Media Profile Path 3 (MDP3) components.
+  It is used to handle the tone mapping of various gamma curves in order to
+  achieve HDR10 effects. This helps adapt the content to the color and
+  brightness range that standard display devices typically support.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8195-mdp3-tcc
+      - items:
+          - const: mediatek,mt8188-mdp3-tcc
+          - const: mediatek,mt8195-mdp3-tcc
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@1400b000 {
+        compatible = "mediatek,mt8195-mdp3-tcc";
+        reg = <0x1400b000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_TCC>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml
new file mode 100644
index 000000000000..cdfa27324738
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-tdshp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Media Data Path 3 Two-Dimensional Sharpness
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description:
+  Two-Dimensional Sharpness (TDSHP) is a Media Profile Path 3 (MDP3) component
+  used to perform image edge sharpening and enhance vividness and contrast.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8195-mdp3-tdshp
+      - items:
+          - const: mediatek,mt8188-mdp3-tdshp
+          - const: mediatek,mt8195-mdp3-tdshp
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    display@14007000 {
+        compatible = "mediatek,mt8195-mdp3-tdshp";
+        reg = <0x14007000 0x1000>;
+        mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>;
+        clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
new file mode 100644
index 000000000000..b6269f4f9fd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-wrot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Write DMA with Rotation
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to write DMA with frame rotation.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-mdp3-wrot
+      - items:
+          - enum:
+              - mediatek,mt8188-mdp3-wrot
+              - mediatek,mt8195-mdp3-wrot
+          - const: mediatek,mt8183-mdp3-wrot
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+  - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    dma-controller@14005000 {
+        compatible = "mediatek,mt8183-mdp3-wrot";
+        reg = <0x14005000 0x1000>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+        mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+                              <CMDQ_EVENT_MDP_WROT0_EOF>;
+        power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+        clocks = <&mmsys CLK_MM_MDP_WROT0>;
+        iommus = <&iommu>;
+        #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt7622-cir.yaml b/Documentation/devicetree/bindings/media/mediatek,mt7622-cir.yaml
new file mode 100644
index 000000000000..c01210e053f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt7622-cir.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt7622-cir.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Consumer Infrared Receiver on-SoC Controller
+
+maintainers:
+  - Sean Wang <sean.wang@mediatek.com>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt7622-cir
+      - mediatek,mt7623-cir
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk
+      - const: bus
+
+required:
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ir@10013000 {
+        compatible = "mediatek,mt7623-cir";
+        reg = <0x10013000 0x1000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&infracfg CLK_INFRA_IRRX>, <&topckgen CLK_TOP_AXI_SEL>;
+        clock-names = "clk", "bus";
+        linux,rc-map-name = "rc-rc6-mce";
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml
new file mode 100644
index 000000000000..8ca33a733c47
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8173-mdp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8173 Media Data Path
+
+maintainers:
+  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
+
+description:
+  Media Data Path is used for scaling and color space conversion.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-mdp-rdma
+          - mediatek,mt8173-mdp-rsz
+          - mediatek,mt8173-mdp-wdma
+          - mediatek,mt8173-mdp-wrot
+      - items:
+          - const: mediatek,mt8173-mdp-rdma
+          - const: mediatek,mt8173-mdp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to Mediatek Video Processor Unit for HW Codec encode/decode and
+      image processing.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8173-mdp-rdma
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+            - description: Mutex clock
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-mdp-rdma
+              - mediatek,mt8173-mdp-wdma
+              - mediatek,mt8173-mdp-wrot
+    then:
+      required:
+        - iommus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8173-mdp
+    then:
+      required:
+        - mediatek,vpu
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mdp_rdma0: rdma@14001000 {
+            compatible = "mediatek,mt8173-mdp-rdma",
+                         "mediatek,mt8173-mdp";
+            reg = <0 0x14001000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+                     <&mmsys CLK_MM_MUTEX_32K>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            iommus = <&iommu M4U_PORT_MDP_RDMA0>;
+            mediatek,vpu = <&vpu>;
+        };
+
+        mdp_rdma1: rdma@14002000 {
+            compatible = "mediatek,mt8173-mdp-rdma";
+            reg = <0 0x14002000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_RDMA1>,
+                     <&mmsys CLK_MM_MUTEX_32K>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            iommus = <&iommu M4U_PORT_MDP_RDMA1>;
+        };
+
+        mdp_rsz0: rsz@14003000 {
+            compatible = "mediatek,mt8173-mdp-rsz";
+            reg = <0 0x14003000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+        };
+
+        mdp_rsz1: rsz@14004000 {
+            compatible = "mediatek,mt8173-mdp-rsz";
+            reg = <0 0x14004000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+        };
+
+        mdp_rsz2: rsz@14005000 {
+            compatible = "mediatek,mt8173-mdp-rsz";
+            reg = <0 0x14005000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_RSZ2>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+        };
+
+        mdp_wdma0: wdma@14006000 {
+            compatible = "mediatek,mt8173-mdp-wdma";
+            reg = <0 0x14006000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_WDMA>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            iommus = <&iommu M4U_PORT_MDP_WDMA>;
+        };
+
+        mdp_wrot0: wrot@14007000 {
+            compatible = "mediatek,mt8173-mdp-wrot";
+            reg = <0 0x14007000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_WROT0>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            iommus = <&iommu M4U_PORT_MDP_WROT0>;
+        };
+
+        mdp_wrot1: wrot@14008000 {
+            compatible = "mediatek,mt8173-mdp-wrot";
+            reg = <0 0x14008000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_MDP_WROT1>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            iommus = <&iommu M4U_PORT_MDP_WROT1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
new file mode 100644
index 000000000000..8a47761f1e6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8173-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8173 Video Processor Unit
+
+maintainers:
+  - Ariel D'Alessandro <ariel.dalessandro@collabora.com>
+
+description:
+  Video Processor Unit is a HW video controller. It controls HW Codec including
+  H.264/VP8/VP9 Decode, H.264/VP8 Encode and Image Processor (scale/rotate/color
+  convert).
+
+properties:
+  compatible:
+    const: mediatek,mt8173-vpu
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: tcm
+      - const: cfg_reg
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: main
+
+  memory-region:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - memory-region
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        vpu: vpu@10020000 {
+            compatible = "mediatek,mt8173-vpu";
+            reg = <0 0x10020000 0 0x30000>,
+                  <0 0x10050000 0 0x100>;
+            reg-names = "tcm", "cfg_reg";
+            interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&topckgen CLK_TOP_SCP_SEL>;
+            clock-names = "main";
+            memory-region = <&vpu_dma_reserved>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
new file mode 100644
index 000000000000..e5448c60e3eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Decoder
+
+maintainers:
+  - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com>
+
+description:
+  MediaTek JPEG Decoder is the JPEG decode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    const: mediatek,mt8195-jpgdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 6
+    description:
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  "^jpgdec@[0-9a-f]+$":
+    type: object
+    description:
+      The jpeg decoder hardware device node which should be added as subnodes to
+      the main jpeg node.
+
+    properties:
+      compatible:
+        const: mediatek,mt8195-jpgdec-hw
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description:
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: jpgdec
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - interrupts
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domains
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        jpgdec-master {
+            compatible = "mediatek,mt8195-jpgdec";
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+            iommus = <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA0>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA0>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            jpgdec@1a040000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGDEC>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+            };
+
+            jpgdec@1a050000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGDEC_C1>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+            };
+
+            jpgdec@1b040000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */
+                iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGDEC>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
new file mode 100644
index 000000000000..596186497b68
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Encoder
+
+maintainers:
+  - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com>
+
+description:
+  MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    const: mediatek,mt8195-jpgenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+    description:
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  "^jpgenc@[0-9a-f]+$":
+    type: object
+    description:
+      The jpeg encoder hardware device node which should be added as subnodes to
+      the main jpeg node.
+
+    properties:
+      compatible:
+        const: mediatek,mt8195-jpgenc-hw
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description:
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: jpgenc
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - interrupts
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domains
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        jpgenc-master {
+            compatible = "mediatek,mt8195-jpgenc";
+            power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+            iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            jpgenc@1a030000 {
+                compatible = "mediatek,mt8195-jpgenc-hw";
+                reg = <0 0x1a030000 0 0x10000>;
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_BSDMA>;
+                interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGENC>;
+                clock-names = "jpgenc";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+            };
+
+            jpgenc@1b030000 {
+                compatible = "mediatek,mt8195-jpgenc-hw";
+                reg = <0 0x1b030000 0 0x10000>;
+                iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+                interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGENC>;
+                clock-names = "jpgenc";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
new file mode 100644
index 000000000000..d726d141a434
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Decode Accelerator
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |+
+  Mediatek Video Decode is the video decode hardware present in Mediatek
+  SoCs which supports high resolution decoding functionalities.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8173-vcodec-dec
+      - mediatek,mt8183-vcodec-dec
+
+  reg:
+    minItems: 11
+    maxItems: 11
+
+  reg-names:
+    items:
+      - const: misc
+      - const: ld
+      - const: top
+      - const: cm
+      - const: ad
+      - const: av
+      - const: pp
+      - const: hwd
+      - const: hwq
+      - const: hwb
+      - const: hwg
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 8
+
+  clock-names:
+    minItems: 1
+    maxItems: 8
+
+  assigned-clocks: true
+
+  assigned-clock-parents: true
+
+  assigned-clock-rates: true
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to vpu.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to scp.
+
+  mediatek,vdecsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the vdecsys syscon node.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - mediatek,vdecsys
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8183-vcodec-dec
+
+    then:
+      required:
+        - mediatek,scp
+
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+
+        clock-names:
+          items:
+            - const: vdec
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-vcodec-dec
+
+    then:
+      required:
+        - mediatek,vpu
+
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 8
+
+        clock-names:
+          items:
+            - const: vcodecpll
+            - const: univpll_d2
+            - const: clk_cci400_sel
+            - const: vdec_sel
+            - const: vdecpll
+            - const: vencpll
+            - const: venc_lt_sel
+            - const: vdec_bus_clk_src
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    vcodec_dec: vcodec@16020000 {
+      compatible = "mediatek,mt8173-vcodec-dec";
+      reg = <0x16020000 0x1000>,  /*VDEC_MISC*/
+          <0x16021000 0x800>,   /*VDEC_LD*/
+          <0x16021800 0x800>,   /*VDEC_TOP*/
+          <0x16022000 0x1000>,  /*VDEC_CM*/
+          <0x16023000 0x1000>,  /*VDEC_AD*/
+          <0x16024000 0x1000>,  /*VDEC_AV*/
+          <0x16025000 0x1000>,  /*VDEC_PP*/
+          <0x16026800 0x800>,   /*VP8_VD*/
+          <0x16027000 0x800>,   /*VP6_VD*/
+          <0x16027800 0x800>,   /*VP8_VL*/
+          <0x16028400 0x400>;   /*VP9_VD*/
+      interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
+      mediatek,vpu = <&vpu>;
+      mediatek,vdecsys = <&vdecsys>;
+      power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+      clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
+             <&topckgen CLK_TOP_UNIVPLL_D2>,
+             <&topckgen CLK_TOP_CCI400_SEL>,
+             <&topckgen CLK_TOP_VDEC_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL>,
+             <&apmixedsys CLK_APMIXED_VENCPLL>,
+             <&topckgen CLK_TOP_VENC_LT_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL_370P5>;
+      clock-names = "vcodecpll",
+                  "univpll_d2",
+                  "clk_cci400_sel",
+                  "vdec_sel",
+                  "vdecpll",
+                  "vencpll",
+                  "venc_lt_sel",
+                  "vdec_bus_clk_src";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
+                      <&topckgen CLK_TOP_CCI400_SEL>,
+                      <&topckgen CLK_TOP_VDEC_SEL>,
+                      <&apmixedsys CLK_APMIXED_VCODECPLL>,
+                      <&apmixedsys CLK_APMIXED_VENCPLL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
+                             <&topckgen CLK_TOP_UNIVPLL_D2>,
+                             <&topckgen CLK_TOP_VCODECPLL>;
+      assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
new file mode 100644
index 000000000000..ebc615584f92
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -0,0 +1,179 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Encode Accelerator
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |+
+  Mediatek Video Encode is the video encode hardware present in Mediatek
+  SoCs which supports high resolution encoding functionalities.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8173-vcodec-enc-vp8
+              - mediatek,mt8173-vcodec-enc
+              - mediatek,mt8183-vcodec-enc
+              - mediatek,mt8188-vcodec-enc
+              - mediatek,mt8192-vcodec-enc
+              - mediatek,mt8195-vcodec-enc
+      - items:
+          - const: mediatek,mt8186-vcodec-enc
+          - const: mediatek,mt8183-vcodec-enc
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to vpu.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to scp.
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8183-vcodec-enc
+              - mediatek,mt8188-vcodec-enc
+              - mediatek,mt8192-vcodec-enc
+              - mediatek,mt8195-vcodec-enc
+
+    then:
+      required:
+        - mediatek,scp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-vcodec-enc-vp8
+              - mediatek,mt8173-vcodec-enc
+
+    then:
+      required:
+        - mediatek,vpu
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8173-vcodec-enc-vp8
+
+    then:
+      properties:
+        clock:
+          items:
+            minItems: 1
+            maxItems: 1
+        clock-names:
+          items:
+            - const: venc_lt_sel
+    else:
+      properties:
+        clock:
+          items:
+            minItems: 1
+            maxItems: 1
+        clock-names:
+          items:
+            - const: venc_sel
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    vcodec_enc_avc: vcodec@18002000 {
+      compatible = "mediatek,mt8173-vcodec-enc";
+      reg = <0x18002000 0x1000>;
+      interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_VENC_RCPU>,
+             <&iommu M4U_PORT_VENC_REC>,
+             <&iommu M4U_PORT_VENC_BSDMA>,
+             <&iommu M4U_PORT_VENC_SV_COMV>,
+             <&iommu M4U_PORT_VENC_RD_COMV>,
+             <&iommu M4U_PORT_VENC_CUR_LUMA>,
+             <&iommu M4U_PORT_VENC_CUR_CHROMA>,
+             <&iommu M4U_PORT_VENC_REF_LUMA>,
+             <&iommu M4U_PORT_VENC_REF_CHROMA>,
+             <&iommu M4U_PORT_VENC_NBM_RDMA>,
+             <&iommu M4U_PORT_VENC_NBM_WDMA>;
+      mediatek,vpu = <&vpu>;
+      clocks = <&topckgen CLK_TOP_VENC_SEL>;
+      clock-names = "venc_sel";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
+    };
+
+    vcodec_enc_vp8: vcodec@19002000 {
+      compatible = "mediatek,mt8173-vcodec-enc-vp8";
+      reg =  <0x19002000 0x1000>;	/* VENC_LT_SYS */
+      interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
+             <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
+             <&iommu M4U_PORT_VENC_BSDMA_SET2>,
+             <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
+             <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
+             <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
+             <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
+             <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
+             <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+      mediatek,vpu = <&vpu>;
+      clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+      clock-names = "venc_lt_sel";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
new file mode 100644
index 000000000000..bf8082d87ac0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
@@ -0,0 +1,285 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Video Decode Accelerator With Multi Hardware
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |
+  MediaTek Video Decode Accelerator is the video decoding hardware present in
+  MediaTek SoCs that supports high-resolution decoding functionalities.
+  It consists of parent and child nodes.
+
+  The decoder hardware block diagram is shown below:
+
+    +------------------------------------------------+------------------------------+
+    |                                                |                              |
+    |  input -> LAT-SoC HW -> LAT HW -> LAT buffer --|--> Core HW -> output buffer  |
+    |              ||           ||                   |       ||                     |
+    +--------------||-----------||-------------------+-------||---------------------+
+                    LAT Workqueue                    |  Core Workqueue       <parent>
+    ---------------||-----------||-------------------|-------||----------------------
+                   ||<----------||---------HW index--------->||              <child>
+                   \/           \/                           \/
+           +-------------------------------------------------------------+
+           |                          enable/disable                     |
+           |                 clk     power    irq    iommu               |
+           |                   (lat/lat-soc/core0/core1)                 |
+           +-------------------------------------------------------------+
+
+  The child nodes represent the individual hardware blocks within the decoding
+  pipeline, such as LAT-SoC, LAT and Core.
+  Each child node is responsible for managing the dedicated resources of the
+  hardware, such as clocks, power domains, interrupts and IOMMUs.
+
+  The parent node is a central point of control for the child nodes.
+  It identifies the specific video decoding pipeline architecture used by the
+  SoC, manages the shared resources like workqueues and platform data, and
+  handles V4L2 API calls on behalf of the underlying hardware.
+
+  The parent utilizes two workqueues to manage the decoding process.
+  1. LAT Workqueue, for LAT-SoC and LAT decoder:
+     Its workers take input bitstream and LAT buffer, enable the hardware for
+     decoding tasks, write the result to LAT buffer, and disable the hardware
+     after the LAT decoding is done.
+  2. Core Workqueue, for Core decoder:
+     Its workers take LAT buffer and output buffer, enable the hardware for
+     decoding tasks, write the result to output buffer, and disable the hardware
+     after the Core decoding is done.
+
+  These hardware decode each frame cyclically.
+
+  The hardware might be associated with different SMI-common devices.
+  To prevent IOMMU faults during DRAM access in such cases, each hardware with
+  the unique SMI-common device must be placed under a separate parent node in
+  the device tree.
+
+  LAT-SoC refers to another hardware block that connected to additional LARB
+  (local arbiter) ports, such as RDMA and UFO.
+  It requires independent power and clock control to work with LAT decoder, and
+  it doesn't have a dedicated interrupt.
+
+  The used video decoding pipeline architecture across various Mediatek SoC:
+    MT8195: LAT-SoC + LAT + Core
+    MT8192: LAT + Core
+    MT8188: LAT + Core
+    MT8186: Core
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8192-vcodec-dec
+      - mediatek,mt8186-vcodec-dec
+      - mediatek,mt8188-vcodec-dec
+      - mediatek,mt8195-vcodec-dec
+
+  reg:
+    minItems: 1
+    items:
+      - description: VDEC_SYS register space
+      - description: VDEC_RACING_CTRL register space
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The node of system control processor (SCP), using
+      the remoteproc & rpmsg framework.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  '^video-codec@[0-9a-f]+$':
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - mediatek,mtk-vcodec-core
+          - mediatek,mtk-vcodec-lat
+          - mediatek,mtk-vcodec-lat-soc
+
+      reg:
+        maxItems: 1
+        description: VDEC_MISC register space
+
+      interrupts:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description: |
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      clocks:
+        minItems: 4
+        maxItems: 5
+
+      clock-names:
+        minItems: 4
+        maxItems: 5
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - clocks
+      - clock-names
+      - assigned-clocks
+      - assigned-clock-parents
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - iommus
+  - mediatek,scp
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mtk-vcodec-core
+          - mediatek,mtk-vcodec-lat
+
+then:
+  required:
+    - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8192-vcodec-dec
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: sel
+            - const: soc-vdec
+            - const: soc-lat
+            - const: vdec
+            - const: top
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-vcodec-dec
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: sel
+            - const: vdec
+            - const: lat
+            - const: top
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8192-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+
+    bus@16000000 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0 0x16000000 0x16000000 0 0x40000>;
+
+        video-codec@16000000 {
+            compatible = "mediatek,mt8192-vcodec-dec";
+            mediatek,scp = <&scp>;
+            iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0 0 0 0x16000000 0 0x40000>;
+            reg = <0 0x16000000 0 0x1000>;		/* VDEC_SYS */
+            video-codec@10000 {
+                compatible = "mediatek,mtk-vcodec-lat";
+                reg = <0 0x10000 0 0x800>;
+                interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
+                iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
+                clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+                    <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+                    <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+                    <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+                    <&topckgen CLK_TOP_MAINPLL_D4>;
+                clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+                assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+                assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+                power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+            };
+
+            video-codec@25000 {
+                compatible = "mediatek,mtk-vcodec-core";
+                reg = <0 0x25000 0 0x1000>;
+                interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
+                iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
+                clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+                    <&vdecsys CLK_VDEC_VDEC>,
+                    <&vdecsys CLK_VDEC_LAT>,
+                    <&vdecsys CLK_VDEC_LARB1>,
+                    <&topckgen CLK_TOP_MAINPLL_D4>;
+                clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+                assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+                assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+                power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
deleted file mode 100644
index 39c1028b2dfb..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Mediatek JPEG Decoder
-
-Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
-
-Required properties:
-- compatible : must be one of the following string:
-	"mediatek,mt8173-jpgdec"
-	"mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec"
-	"mediatek,mt2701-jpgdec"
-- reg : physical base address of the jpeg decoder registers and length of
-  memory mapped region.
-- interrupts : interrupt number to the interrupt controller.
-- clocks: device clocks, see
-  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "jpgdec-smi" and "jpgdec".
-- power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
-- iommus: should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-
-Example:
-	jpegdec: jpegdec@15004000 {
-		compatible = "mediatek,mt2701-jpgdec";
-		reg = <0 0x15004000 0 0x1000>;
-		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
-			  <&imgsys CLK_IMG_JPGDEC>;
-		clock-names = "jpgdec-smi",
-			      "jpgdec";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
-		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
-			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
-	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
new file mode 100644
index 000000000000..a4aacd3eb189
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek-jpeg-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Decoder
+
+maintainers:
+  - Xia Jiang <xia.jiang@mediatek.com>
+
+description: |-
+  Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8173-jpgdec
+              - mediatek,mt2701-jpgdec
+      - items:
+          - enum:
+              - mediatek,mt7623-jpgdec
+              - mediatek,mt8188-jpgdec
+          - const: mediatek,mt2701-jpgdec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: jpgdec-smi
+      - const: jpgdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    minItems: 2
+    maxItems: 32
+    description: |
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt2701-larb-port.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    jpegdec: jpegdec@15004000 {
+      compatible = "mediatek,mt2701-jpgdec";
+      reg = <0x15004000 0x1000>;
+      interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+      clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+                <&imgsys CLK_IMG_JPGDEC>;
+      clock-names = "jpgdec-smi",
+                    "jpgdec";
+      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+      iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+               <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
deleted file mode 100644
index 5e53c6ab52d0..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* MediaTek JPEG Encoder
-
-MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
-
-Required properties:
-- compatible : "mediatek,mt2701-jpgenc"
-  followed by "mediatek,mtk-jpgenc"
-- reg : physical base address of the JPEG encoder registers and length of
-  memory mapped region.
-- interrupts : interrupt number to the interrupt controller.
-- clocks: device clocks, see
-  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "jpgenc". It is the clock of JPEG encoder.
-- power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current SoCs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
-- iommus: should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-
-Example:
-	jpegenc: jpegenc@1500a000 {
-		compatible = "mediatek,mt2701-jpgenc",
-			     "mediatek,mtk-jpgenc";
-		reg = <0 0x1500a000 0 0x1000>;
-		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_VENC>;
-		clock-names = "jpgenc";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
-		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
-			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
-	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
new file mode 100644
index 000000000000..5b15f8977f67
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek-jpeg-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Encoder
+
+maintainers:
+  - Xia Jiang <xia.jiang@mediatek.com>
+
+description: |-
+  MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-jpgenc
+          - mediatek,mt8183-jpgenc
+          - mediatek,mt8186-jpgenc
+          - mediatek,mt8188-jpgenc
+      - const: mediatek,mtk-jpgenc
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: jpgenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    minItems: 2
+    maxItems: 32
+    description: |
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt2701-larb-port.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    jpegenc: jpegenc@1500a000 {
+      compatible = "mediatek,mt2701-jpgenc",
+                   "mediatek,mtk-jpgenc";
+      reg = <0x1500a000 0x1000>;
+      interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+      clocks =  <&imgsys CLK_IMG_VENC>;
+      clock-names = "jpgenc";
+      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+      iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+               <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
deleted file mode 100644
index caa24943da33..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-* Mediatek Media Data Path
-
-Media Data Path is used for scaling and color space conversion.
-
-Required properties (controller node):
-- compatible: "mediatek,mt8173-mdp"
-- mediatek,vpu: the node of video processor unit, see
-  Documentation/devicetree/bindings/media/mediatek-vpu.txt for details.
-
-Required properties (all function blocks, child node):
-- compatible: Should be one of
-        "mediatek,mt8173-mdp-rdma"  - read DMA
-        "mediatek,mt8173-mdp-rsz"   - resizer
-        "mediatek,mt8173-mdp-wdma"  - write DMA
-        "mediatek,mt8173-mdp-wrot"  - write DMA with rotation
-- reg: Physical base address and length of the function block register space
-- clocks: device clocks, see
-  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
-
-Required properties (DMA function blocks, child node):
-- compatible: Should be one of
-        "mediatek,mt8173-mdp-rdma"
-        "mediatek,mt8173-mdp-wdma"
-        "mediatek,mt8173-mdp-wrot"
-- iommus: should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
-
-Example:
-	mdp_rdma0: rdma@14001000 {
-		compatible = "mediatek,mt8173-mdp-rdma";
-			     "mediatek,mt8173-mdp";
-		reg = <0 0x14001000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_RDMA0>,
-			 <&mmsys CLK_MM_MUTEX_32K>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
-		mediatek,vpu = <&vpu>;
-	};
-
-	mdp_rdma1: rdma@14002000 {
-		compatible = "mediatek,mt8173-mdp-rdma";
-		reg = <0 0x14002000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_RDMA1>,
-			 <&mmsys CLK_MM_MUTEX_32K>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
-	};
-
-	mdp_rsz0: rsz@14003000 {
-		compatible = "mediatek,mt8173-mdp-rsz";
-		reg = <0 0x14003000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_RSZ0>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	};
-
-	mdp_rsz1: rsz@14004000 {
-		compatible = "mediatek,mt8173-mdp-rsz";
-		reg = <0 0x14004000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_RSZ1>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	};
-
-	mdp_rsz2: rsz@14005000 {
-		compatible = "mediatek,mt8173-mdp-rsz";
-		reg = <0 0x14005000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_RSZ2>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	};
-
-	mdp_wdma0: wdma@14006000 {
-		compatible = "mediatek,mt8173-mdp-wdma";
-		reg = <0 0x14006000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_WDMA>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
-	};
-
-	mdp_wrot0: wrot@14007000 {
-		compatible = "mediatek,mt8173-mdp-wrot";
-		reg = <0 0x14007000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_WROT0>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
-	};
-
-	mdp_wrot1: wrot@14008000 {
-		compatible = "mediatek,mt8173-mdp-wrot";
-		reg = <0 0x14008000 0 0x1000>;
-		clocks = <&mmsys CLK_MM_MDP_WROT1>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
-	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
deleted file mode 100644
index 665a9508708e..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ /dev/null
@@ -1,131 +0,0 @@
-Mediatek Video Codec
-
-Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
-supports high resolution encoding and decoding functionalities.
-
-Required properties:
-- compatible : must be one of the following string:
-  "mediatek,mt8173-vcodec-enc-vp8" for mt8173 vp8 encoder.
-  "mediatek,mt8173-vcodec-enc" for mt8173 avc encoder.
-  "mediatek,mt8183-vcodec-enc" for MT8183 encoder.
-  "mediatek,mt8173-vcodec-dec" for MT8173 decoder.
-  "mediatek,mt8192-vcodec-enc" for MT8192 encoder.
-  "mediatek,mt8183-vcodec-dec" for MT8183 decoder.
-  "mediatek,mt8195-vcodec-enc" for MT8195 encoder.
-- reg : Physical base address of the video codec registers and length of
-  memory mapped region.
-- interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
-- clocks : list of clock specifiers, corresponding to entries in
-  the clock-names property.
-- clock-names: avc encoder must contain "venc_sel", vp8 encoder must
-  contain "venc_lt_sel", decoder must contain "vcodecpll", "univpll_d2",
-  "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll", "venc_lt_sel",
-  "vdec_bus_clk_src".
-- iommus : should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-- dma-ranges : describes the dma address range space that the codec hw access.
-One of the two following nodes:
-- mediatek,vpu : the node of the video processor unit, if using VPU.
-- mediatek,scp : the node of the SCP unit, if using SCP.
-
-
-Example:
-
-vcodec_dec: vcodec@16000000 {
-    compatible = "mediatek,mt8173-vcodec-dec";
-    reg = <0 0x16000000 0 0x100>,   /*VDEC_SYS*/
-          <0 0x16020000 0 0x1000>,  /*VDEC_MISC*/
-          <0 0x16021000 0 0x800>,   /*VDEC_LD*/
-          <0 0x16021800 0 0x800>,   /*VDEC_TOP*/
-          <0 0x16022000 0 0x1000>,  /*VDEC_CM*/
-          <0 0x16023000 0 0x1000>,  /*VDEC_AD*/
-          <0 0x16024000 0 0x1000>,  /*VDEC_AV*/
-          <0 0x16025000 0 0x1000>,  /*VDEC_PP*/
-          <0 0x16026800 0 0x800>,   /*VP8_VD*/
-          <0 0x16027000 0 0x800>,   /*VP6_VD*/
-          <0 0x16027800 0 0x800>,   /*VP8_VL*/
-          <0 0x16028400 0 0x400>;   /*VP9_VD*/
-    interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
-    iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
-    mediatek,vpu = <&vpu>;
-    power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
-    clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
-             <&topckgen CLK_TOP_UNIVPLL_D2>,
-             <&topckgen CLK_TOP_CCI400_SEL>,
-             <&topckgen CLK_TOP_VDEC_SEL>,
-             <&topckgen CLK_TOP_VCODECPLL>,
-             <&apmixedsys CLK_APMIXED_VENCPLL>,
-             <&topckgen CLK_TOP_VENC_LT_SEL>,
-             <&topckgen CLK_TOP_VCODECPLL_370P5>;
-    clock-names = "vcodecpll",
-                  "univpll_d2",
-                  "clk_cci400_sel",
-                  "vdec_sel",
-                  "vdecpll",
-                  "vencpll",
-                  "venc_lt_sel",
-                  "vdec_bus_clk_src";
-    assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
-                      <&topckgen CLK_TOP_CCI400_SEL>,
-                      <&topckgen CLK_TOP_VDEC_SEL>,
-                      <&apmixedsys CLK_APMIXED_VCODECPLL>,
-                      <&apmixedsys CLK_APMIXED_VENCPLL>;
-    assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
-                             <&topckgen CLK_TOP_UNIVPLL_D2>,
-                             <&topckgen CLK_TOP_VCODECPLL>;
-    assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
-  };
-
-vcodec_enc_avc: vcodec@18002000 {
-    compatible = "mediatek,mt8173-vcodec-enc";
-    reg = <0 0x18002000 0 0x1000>;
-    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-    iommus = <&iommu M4U_PORT_VENC_RCPU>,
-             <&iommu M4U_PORT_VENC_REC>,
-             <&iommu M4U_PORT_VENC_BSDMA>,
-             <&iommu M4U_PORT_VENC_SV_COMV>,
-             <&iommu M4U_PORT_VENC_RD_COMV>,
-             <&iommu M4U_PORT_VENC_CUR_LUMA>,
-             <&iommu M4U_PORT_VENC_CUR_CHROMA>,
-             <&iommu M4U_PORT_VENC_REF_LUMA>,
-             <&iommu M4U_PORT_VENC_REF_CHROMA>,
-             <&iommu M4U_PORT_VENC_NBM_RDMA>,
-             <&iommu M4U_PORT_VENC_NBM_WDMA>;
-    mediatek,larb = <&larb3>;
-    mediatek,vpu = <&vpu>;
-    clocks = <&topckgen CLK_TOP_VENC_SEL>;
-    clock-names = "venc_sel";
-    assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
-    assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
-  };
-
-vcodec_enc_vp8: vcodec@19002000 {
-    compatible = "mediatek,mt8173-vcodec-enc-vp8";
-    reg =  <0 0x19002000 0 0x1000>;	/* VENC_LT_SYS */
-    interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
-    iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
-             <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
-             <&iommu M4U_PORT_VENC_BSDMA_SET2>,
-             <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
-             <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
-             <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
-             <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
-             <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
-             <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-    mediatek,larb = <&larb5>;
-    mediatek,vpu = <&vpu>;
-    clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
-    clock-names = "venc_lt_sel";
-    assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
-    assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
-  };
diff --git a/Documentation/devicetree/bindings/media/mediatek-vpu.txt b/Documentation/devicetree/bindings/media/mediatek-vpu.txt
deleted file mode 100644
index 2a5bac37f9a2..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-vpu.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Mediatek Video Processor Unit
-
-Video Processor Unit is a HW video controller. It controls HW Codec including
-H.264/VP8/VP9 Decode, H.264/VP8 Encode and Image Processor (scale/rotate/color convert).
-
-Required properties:
-  - compatible: "mediatek,mt8173-vpu"
-  - reg: Must contain an entry for each entry in reg-names.
-  - reg-names: Must include the following entries:
-    "tcm": tcm base
-    "cfg_reg": Main configuration registers base
-  - interrupts: interrupt number to the cpu.
-  - clocks : clock name from clock manager
-  - clock-names: must be main. It is the main clock of VPU
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for VPU extended memory; if not present, VPU may be located
-    anywhere in the memory
-
-Example:
-	vpu: vpu@10020000 {
-		compatible = "mediatek,mt8173-vpu";
-		reg = <0 0x10020000 0 0x30000>,
-		      <0 0x10050000 0 0x100>;
-		reg-names = "tcm", "cfg_reg";
-		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&topckgen TOP_SCP_SEL>;
-		clock-names = "main";
-	};
diff --git a/Documentation/devicetree/bindings/media/meson-ir.txt b/Documentation/devicetree/bindings/media/meson-ir.txt
deleted file mode 100644
index efd9d29a8f10..000000000000
--- a/Documentation/devicetree/bindings/media/meson-ir.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Amlogic Meson IR remote control receiver
-
-Required properties:
- - compatible	: depending on the platform this should be one of:
-		  - "amlogic,meson6-ir"
-		  - "amlogic,meson8b-ir"
-		  - "amlogic,meson-gxbb-ir"
- - reg		: physical base address and length of the device registers
- - interrupts	: a single specifier for the interrupt from the device
-
-Optional properties:
- - linux,rc-map-name:	see rc.txt file in the same directory.
-
-Example:
-
-	ir-receiver@c8100480 {
-		compatible= "amlogic,meson6-ir";
-		reg = <0xc8100480 0x20>;
-		interrupts = <0 15 1>;
-	};
diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
new file mode 100644
index 000000000000..b3a345fc6464
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/microchip,csi2dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip CSI2 Demux Controller (CSI2DC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+description:
+  CSI2DC - Camera Serial Interface 2 Demux Controller
+
+  CSI2DC is a hardware block that receives incoming data from either from an
+  IDI interface or from a parallel bus interface.
+  It filters IDI packets based on their data type and virtual channel
+  identifier, then converts the byte stream to a pixel stream into a cross
+  clock domain towards a parallel interface that can be read by a sensor
+  controller.
+  IDI interface is Synopsys proprietary.
+  CSI2DC can act a simple bypass bridge if the incoming data is coming from
+  a parallel interface.
+
+  CSI2DC provides two pipes, one video pipe and one data pipe. Video pipe
+  is connected at the output to a sensor controller and the data pipe is
+  accessible as a DMA slave port to a DMA controller.
+
+  CSI2DC supports a single 'port' node as a sink port with either Synopsys
+  32-bit IDI interface or a parallel interface.
+
+  CSI2DC supports one 'port' node as source port with parallel interface.
+  This is called video pipe.
+  This port has an 'endpoint' that can be connected to a sink port of another
+  controller (next in pipeline).
+
+  CSI2DC also supports direct access to the data through AHB, via DMA channel,
+  called data pipe.
+  For data pipe to be available, a dma controller and a dma channel must be
+  referenced.
+
+properties:
+  compatible:
+    const: microchip,sama7g5-csi2dc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    description:
+      CSI2DC must have two clocks to function correctly. One clock is the
+      peripheral clock for the inside functionality of the hardware block.
+      This is named 'pclk'. The second clock must be the cross domain clock,
+      in which CSI2DC will perform clock crossing. This clock must be fed
+      by the next controller in pipeline, which usually is a sensor controller.
+      Normally this clock should be given by this sensor controller who
+      is also a clock source. This clock is named 'scck', sensor controller clock.
+    items:
+      - const: pclk
+      - const: scck
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the input port.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+            description: Endpoint connected to input device
+
+            properties:
+              bus-type:
+                enum: [4, 5, 6]
+                default: 4
+
+              bus-width:
+                enum: [8, 9, 10, 11, 12, 13, 14]
+                default: 14
+
+              clock-noncontinuous:
+                type: boolean
+                description:
+                  Presence of this boolean property decides whether clock is
+                  continuous or noncontinuous.
+
+              remote-endpoint: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the output port.
+
+        properties:
+          endpoint:
+            unevaluatedProperties: false
+            $ref: video-interfaces.yaml#
+            description: Endpoint connected to output device
+
+            properties:
+              bus-type:
+                enum: [5, 6]
+                default: 5
+
+              bus-width:
+                enum: [8, 9, 10, 11, 12, 13, 14]
+                default: 14
+
+              remote-endpoint: true
+
+    required:
+      - port@0
+      - port@1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+examples:
+  # Example for connecting to a parallel sensor controller block (video pipe)
+  # and the input is received from Synopsys IDI interface
+  - |
+    csi2dc@e1404000 {
+        compatible = "microchip,sama7g5-csi2dc";
+        reg = <0xe1404000 0x500>;
+        clocks = <&pclk>, <&scck>;
+        clock-names = "pclk", "scck";
+
+        ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>; /* must be 0, first child port */
+                       csi2dc_in: endpoint { /* input from IDI interface */
+                               bus-type = <4>; /* MIPI CSI2 D-PHY */
+                               remote-endpoint = <&csi2host_out>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>; /* must be 1, second child port */
+                       csi2dc_out: endpoint {
+                               remote-endpoint = <&xisc_in>; /* output to sensor controller */
+                       };
+               };
+        };
+    };
+
+  # Example for connecting to a DMA master as an AHB slave
+  # and the input is received from Synopsys IDI interface
+  - |
+    #include <dt-bindings/dma/at91.h>
+    csi2dc@e1404000 {
+        compatible = "microchip,sama7g5-csi2dc";
+        reg = <0xe1404000 0x500>;
+        clocks = <&pclk>, <&scck>;
+        clock-names = "pclk", "scck";
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>;
+        dma-names = "rx";
+
+        ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>; /* must be 0, first child port */
+                       csi2dc_input: endpoint { /* input from IDI interface */
+                               remote-endpoint = <&csi2host_out>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>;
+               };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml
index 4b77103ca913..ede086d55add 100644
--- a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Hantro G1 VPU codec implemented on Microchip SAMA5D4 SoCs
 
@@ -36,12 +35,12 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/clock/at91.h>
-        #include <dt-bindings/interrupt-controller/irq.h>
-
-        vdec0: vdec@300000 {
-                compatible = "microchip,sama5d4-vdec";
-                reg = <0x00300000 0x100000>;
-                interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
-                clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
-        };
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    vdec@300000 {
+        compatible = "microchip,sama5d4-vdec";
+        reg = <0x00300000 0x100000>;
+        interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+    };
diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
index 086e1430af4f..25f5f79d40ce 100644
--- a/Documentation/devicetree/bindings/media/microchip,xisc.yaml
+++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
@@ -67,7 +67,7 @@ properties:
           remote-endpoint: true
 
           bus-width:
-            enum: [8, 9, 10, 11, 12]
+            enum: [8, 9, 10, 11, 12, 14]
             default: 12
 
           hsync-active:
@@ -106,6 +106,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/at91.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
     xisc: xisc@e1408000 {
         compatible = "microchip,sama7g5-isc";
@@ -118,7 +119,7 @@ examples:
 
         port {
                 xisc_in: endpoint {
-                       bus-type = <5>; /* Parallel */
+                       bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                        remote-endpoint = <&csi2dc_out>;
                        hsync-active = <1>;
                        vsync-active = <1>;
@@ -126,4 +127,3 @@ examples:
                 };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/media/mtk-cir.txt b/Documentation/devicetree/bindings/media/mtk-cir.txt
deleted file mode 100644
index 5e18087ce11f..000000000000
--- a/Documentation/devicetree/bindings/media/mtk-cir.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Device-Tree bindings for Mediatek consumer IR controller
-found in Mediatek SoC family
-
-Required properties:
-- compatible	    : Should be
-			"mediatek,mt7623-cir": for MT7623 SoC
-			"mediatek,mt7622-cir": for MT7622 SoC
-- clocks	    : list of clock specifiers, corresponding to
-		      entries in clock-names property;
-- clock-names	    : should contain
-			- "clk" entries: for MT7623 SoC
-			- "clk", "bus" entries: for MT7622 SoC
-- interrupts	    : should contain IR IRQ number;
-- reg		    : should contain IO map address for IR.
-
-Optional properties:
-- linux,rc-map-name : see rc.txt file in the same directory.
-
-Example:
-
-cir: cir@10013000 {
-	compatible = "mediatek,mt7623-cir";
-	reg = <0 0x10013000 0 0x1000>;
-	interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&infracfg CLK_INFRA_IRRX>;
-	clock-names = "clk";
-	linux,rc-map-name = "rc-rc6-mce";
-};
diff --git a/Documentation/devicetree/bindings/media/nokia,n900-ir b/Documentation/devicetree/bindings/media/nokia,n900-ir
deleted file mode 100644
index 13a18ce37dd1..000000000000
--- a/Documentation/devicetree/bindings/media/nokia,n900-ir
+++ /dev/null
@@ -1,20 +0,0 @@
-Device-Tree bindings for LIRC TX driver for Nokia N900(RX51)
-
-Required properties:
-	- compatible: should be "nokia,n900-ir".
-	- pwms: specifies PWM used for IR signal transmission.
-
-Example node:
-
-	pwm9: dmtimer-pwm@9 {
-		compatible = "ti,omap-dmtimer-pwm";
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x00>; /* timer_sys_ck */
-		#pwm-cells = <3>;
-	};
-
-	ir: n900-ir {
-		compatible = "nokia,n900-ir";
-
-		pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
-	};
diff --git a/Documentation/devicetree/bindings/media/nuvoton,npcm-ece.yaml b/Documentation/devicetree/bindings/media/nuvoton,npcm-ece.yaml
new file mode 100644
index 000000000000..b47468e54504
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nuvoton,npcm-ece.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nuvoton,npcm-ece.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Encoding Compression Engine
+
+maintainers:
+  - Joseph Liu <kwliu@nuvoton.com>
+  - Marvin Lin <kflin@nuvoton.com>
+
+description: |
+  Video Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-ece
+      - nuvoton,npcm845-ece
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+
+    ece: video-codec@f0820000 {
+        compatible = "nuvoton,npcm750-ece";
+        reg = <0xf0820000 0x2000>;
+        resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_ECE>;
+    };
diff --git a/Documentation/devicetree/bindings/media/nuvoton,npcm-vcd.yaml b/Documentation/devicetree/bindings/media/nuvoton,npcm-vcd.yaml
new file mode 100644
index 000000000000..c885f559d2e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nuvoton,npcm-vcd.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nuvoton,npcm-vcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Video Capture/Differentiation Engine
+
+maintainers:
+  - Joseph Liu <kwliu@nuvoton.com>
+  - Marvin Lin <kflin@nuvoton.com>
+
+description: |
+  Video Capture/Differentiation Engine (VCD) present on Nuvoton NPCM SoCs.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-vcd
+      - nuvoton,npcm845-vcd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  nuvoton,sysgcr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to access GCR (Global Control Register) registers.
+
+  nuvoton,sysgfxi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to access GFXI (Graphics Core Information) registers.
+
+  nuvoton,ece:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to access ECE (Encoding Compression Engine) registers.
+
+  memory-region:
+    maxItems: 1
+    description:
+      CMA pool to use for buffers allocation instead of the default CMA pool.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - nuvoton,sysgcr
+  - nuvoton,sysgfxi
+  - nuvoton,ece
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/nuvoton,npcm7xx-reset.h>
+
+    vcd: vcd@f0810000 {
+        compatible = "nuvoton,npcm750-vcd";
+        reg = <0xf0810000 0x10000>;
+        interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_VCD>;
+        nuvoton,sysgcr = <&gcr>;
+        nuvoton,sysgfxi = <&gfxi>;
+        nuvoton,ece = <&ece>;
+    };
diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
deleted file mode 100644
index 602169b8aa19..000000000000
--- a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-NVIDIA Tegra Video Decoder Engine
-
-Required properties:
-- compatible : Must contain one of the following values:
-   - "nvidia,tegra20-vde"
-   - "nvidia,tegra30-vde"
-   - "nvidia,tegra114-vde"
-   - "nvidia,tegra124-vde"
-   - "nvidia,tegra132-vde"
-- reg : Must contain an entry for each entry in reg-names.
-- reg-names : Must include the following entries:
-  - sxe
-  - bsev
-  - mbe
-  - ppe
-  - mce
-  - tfe
-  - ppb
-  - vdma
-  - frameid
-- iram : Must contain phandle to the mmio-sram device node that represents
-         IRAM region used by VDE.
-- interrupts : Must contain an entry for each entry in interrupt-names.
-- interrupt-names : Must include the following entries:
-  - sync-token
-  - bsev
-  - sxe
-- clocks : Must include the following entries:
-  - vde
-- resets : Must contain an entry for each entry in reset-names.
-- reset-names : Should include the following entries:
-  - vde
-
-Optional properties:
-- resets : Must contain an entry for each entry in reset-names.
-- reset-names : Must include the following entries:
-  - mc
-- iommus: Must contain phandle to the IOMMU device node.
-
-Example:
-
-video-codec@6001a000 {
-	compatible = "nvidia,tegra20-vde";
-	reg = <0x6001a000 0x1000 /* Syntax Engine */
-	       0x6001b000 0x1000 /* Video Bitstream Engine */
-	       0x6001c000  0x100 /* Macroblock Engine */
-	       0x6001c200  0x100 /* Post-processing Engine */
-	       0x6001c400  0x100 /* Motion Compensation Engine */
-	       0x6001c600  0x100 /* Transform Engine */
-	       0x6001c800  0x100 /* Pixel prediction block */
-	       0x6001ca00  0x100 /* Video DMA */
-	       0x6001d800  0x300 /* Video frame controls */>;
-	reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
-		    "tfe", "ppb", "vdma", "frameid";
-	iram = <&vde_pool>; /* IRAM region */
-	interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
-	interrupt-names = "sync-token", "bsev", "sxe";
-	clocks = <&tegra_car TEGRA20_CLK_VDE>;
-	reset-names = "vde", "mc";
-	resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>;
-	iommus = <&mc TEGRA_SWGROUP_VDE>;
-};
diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
new file mode 100644
index 000000000000..4ecdee1be37e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nvidia,tegra-vde.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Decoder Engine
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra132-vde
+              - nvidia,tegra124-vde
+              - nvidia,tegra114-vde
+      - items:
+          - const: nvidia,tegra30-vde
+          - const: nvidia,tegra20-vde
+      - items:
+          - const: nvidia,tegra20-vde
+
+  reg:
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: sxe
+      - const: bsev
+      - const: mbe
+      - const: ppe
+      - const: mce
+      - const: tfe
+      - const: ppb
+      - const: vdma
+      - const: frameid
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: vde
+      - const: mc
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: sync-token
+      - const: bsev
+      - const: sxe
+
+  iommus:
+    maxItems: 1
+
+  iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of the SRAM MMIO node.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property,
+      which is a bitfield indicating SoC speedo or process ID mask.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle to the SoC core power domain.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - reset-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    video-codec@6001a000 {
+      compatible = "nvidia,tegra20-vde";
+      reg = <0x6001a000 0x1000>, /* Syntax Engine */
+            <0x6001b000 0x1000>, /* Video Bitstream Engine */
+            <0x6001c000  0x100>, /* Macroblock Engine */
+            <0x6001c200  0x100>, /* Post-processing Engine */
+            <0x6001c400  0x100>, /* Motion Compensation Engine */
+            <0x6001c600  0x100>, /* Transform Engine */
+            <0x6001c800  0x100>, /* Pixel prediction block */
+            <0x6001ca00  0x100>, /* Video DMA */
+            <0x6001d800  0x300>; /* Video frame controls */
+      reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+                  "tfe", "ppb", "vdma", "frameid";
+      iram = <&iram>; /* IRAM MMIO region */
+      interrupts = <0  9 4>, /* Sync token */
+                   <0 10 4>, /* BSE-V */
+                   <0 12 4>; /* SXE */
+      interrupt-names = "sync-token", "bsev", "sxe";
+      clocks = <&clk 61>;
+      reset-names = "vde", "mc";
+      resets = <&rst 61>, <&mem 13>;
+      iommus = <&mem 15>;
+      operating-points-v2 = <&dvfs_opp_table>;
+      power-domains = <&domain>;
+    };
diff --git a/Documentation/devicetree/bindings/media/nxp,dw100.yaml b/Documentation/devicetree/bindings/media/nxp,dw100.yaml
new file mode 100644
index 000000000000..21910ff0e1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,dw100.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,dw100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP DW100 Dewarper core
+
+maintainers:
+  - Xavier Roumegue <xavier.roumegue@oss.nxp.com>
+
+description: |-
+  The Dewarp Engine provides high-performance dewarp processing for the
+  correction of the distortion that is introduced in images produced by fisheye
+  and wide angle lenses. It is implemented with a line/tile-cache based
+  architecture. With configurable address mapping look up tables and per tile
+  processing, it successfully generates a corrected output image.
+  The engine can be used to perform scaling, cropping and pixel format
+  conversion.
+
+properties:
+  compatible:
+    enum:
+      - nxp,imx8mp-dw100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The AXI clock
+      - description: The AHB clock
+
+  clock-names:
+    items:
+      - const: axi
+      - const: ahb
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    dewarp: dwe@32e30000 {
+            compatible = "nxp,imx8mp-dw100";
+            reg = <0x32e30000 0x10000>;
+            interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                     <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+            clock-names = "axi", "ahb";
+            power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>;
+    };
diff --git a/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
new file mode 100644
index 000000000000..41ad5b84eaeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
@@ -0,0 +1,233 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
+  receiver IP core named CSIS. The IP core originates from Samsung, and may be
+  compatible with some of the Exynos4 and S5P SoCs. i.MX7 SoCs use CSIS version
+  3.3, and i.MX8 SoCs use CSIS version 3.6.3.
+
+  While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
+  completely wrapped by the CSIS and doesn't expose a control interface of its
+  own. This binding thus covers both IP cores.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx7-mipi-csi2
+          - fsl,imx8mm-mipi-csi2
+      - items:
+          - enum:
+              - fsl,imx8mp-mipi-csi2
+          - const: fsl,imx8mm-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description: The peripheral clock (a.k.a. APB clock)
+      - description: The external clock (optionally used as the pixel clock)
+      - description: The MIPI D-PHY clock
+      - description: The AXI clock
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: pclk
+      - const: wrap
+      - const: phy
+      - const: axi
+
+  power-domains:
+    maxItems: 1
+
+  phy-supply:
+    description: The MIPI D-PHY digital power supply
+
+  resets:
+    items:
+      - description: MIPI D-PHY slave reset
+
+  clock-frequency:
+    description: The desired external clock ("wrap") frequency, in Hz
+    default: 166000000
+    deprecated: true
+
+  fsl,num-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of output channels
+    minimum: 1
+    maximum: 4
+    default: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7-mipi-csi2
+    then:
+      required:
+        - phy-supply
+        - resets
+    else:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+        phy-supply: false
+        resets: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7d-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/reset/imx7-reset.h>
+
+    mipi-csi@30750000 {
+        compatible = "fsl,imx7-mipi-csi2";
+        reg = <0x30750000 0x10000>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+                 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+                 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+        clock-names = "pclk", "wrap", "phy";
+
+        assigned-clocks = <&clks IMX7D_MIPI_CSI_ROOT_CLK>;
+        assigned-clock-rates = <166000000>;
+
+        power-domains = <&pgc_mipi_phy>;
+        phy-supply = <&reg_1p0d>;
+        resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                mipi_from_sensor: endpoint {
+                    remote-endpoint = <&ov2680_to_mipi>;
+                    data-lanes = <1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                mipi_vc0_to_csi_mux: endpoint {
+                    remote-endpoint = <&csi_mux_from_mipi_vc0>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mipi-csi@32e30000 {
+        compatible = "fsl,imx8mm-mipi-csi2";
+        reg = <0x32e30000 0x1000>;
+        interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+                 <&clk IMX8MM_CLK_CSI1_ROOT>,
+                 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
+                 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+        clock-names = "pclk", "wrap", "phy", "axi";
+
+        assigned-clocks = <&clk IMX8MM_CLK_CSI1_ROOT>;
+        assigned-clock-rates = <250000000>;
+
+        power-domains = <&mipi_pd>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
index 5922a2795167..326284e151f6 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - fsl,imx8mq-csi
           - fsl,imx7-csi
           - fsl,imx6ul-csi
       - items:
@@ -36,6 +37,9 @@ properties:
     items:
       - const: mclk
 
+  power-domains:
+    maxItems: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
 
@@ -49,6 +53,17 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mm-csi
+    then:
+      required:
+        - power-domains
+
 examples:
   - |
     #include <dt-bindings/clock/imx7d-clock.h>
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
deleted file mode 100644
index 1ef849dc74d7..000000000000
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ /dev/null
@@ -1,216 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
-
-maintainers:
-  - Rui Miguel Silva <rmfrfs@gmail.com>
-  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
-description: |-
-  The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
-  receiver IP core named CSIS. The IP core originates from Samsung, and may be
-  compatible with some of the Exynos4 and S5P SoCs. i.MX7 SoCs use CSIS version
-  3.3, and i.MX8 SoCs use CSIS version 3.6.3.
-
-  While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
-  completely wrapped by the CSIS and doesn't expose a control interface of its
-  own. This binding thus covers both IP cores.
-
-properties:
-  compatible:
-    enum:
-      - fsl,imx7-mipi-csi2
-      - fsl,imx8mm-mipi-csi2
-
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
-  clocks:
-    minItems: 3
-    items:
-      - description: The peripheral clock (a.k.a. APB clock)
-      - description: The external clock (optionally used as the pixel clock)
-      - description: The MIPI D-PHY clock
-      - description: The AXI clock
-
-  clock-names:
-    minItems: 3
-    items:
-      - const: pclk
-      - const: wrap
-      - const: phy
-      - const: axi
-
-  power-domains:
-    maxItems: 1
-
-  phy-supply:
-    description: The MIPI D-PHY digital power supply
-
-  resets:
-    items:
-      - description: MIPI D-PHY slave reset
-
-  clock-frequency:
-    description: The desired external clock ("wrap") frequency, in Hz
-    default: 166000000
-
-  ports:
-    $ref: /schemas/graph.yaml#/properties/ports
-
-    properties:
-      port@0:
-        $ref: /schemas/graph.yaml#/$defs/port-base
-        unevaluatedProperties: false
-        description:
-          Input port node, single endpoint describing the CSI-2 transmitter.
-
-        properties:
-          endpoint:
-            $ref: video-interfaces.yaml#
-            unevaluatedProperties: false
-
-            properties:
-              data-lanes:
-                description:
-                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
-                items:
-                  minItems: 1
-                  maxItems: 4
-                  items:
-                    - const: 1
-                    - const: 2
-                    - const: 3
-                    - const: 4
-
-            required:
-              - data-lanes
-
-      port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Output port node
-
-required:
-  - compatible
-  - reg
-  - interrupts
-  - clocks
-  - clock-names
-  - power-domains
-  - ports
-
-additionalProperties: false
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: fsl,imx7-mipi-csi2
-    then:
-      required:
-        - phy-supply
-        - resets
-    else:
-      properties:
-        clocks:
-          minItems: 4
-        clock-names:
-          minItems: 4
-        phy-supply: false
-        resets: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/imx7d-clock.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
-    #include <dt-bindings/reset/imx7-reset.h>
-
-    mipi-csi@30750000 {
-        compatible = "fsl,imx7-mipi-csi2";
-        reg = <0x30750000 0x10000>;
-        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-
-        clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-                 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
-                 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
-        clock-names = "pclk", "wrap", "phy";
-        clock-frequency = <166000000>;
-
-        power-domains = <&pgc_mipi_phy>;
-        phy-supply = <&reg_1p0d>;
-        resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
-
-        ports {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            port@0 {
-                reg = <0>;
-
-                mipi_from_sensor: endpoint {
-                    remote-endpoint = <&ov2680_to_mipi>;
-                    data-lanes = <1>;
-                };
-            };
-
-            port@1 {
-                reg = <1>;
-
-                mipi_vc0_to_csi_mux: endpoint {
-                    remote-endpoint = <&csi_mux_from_mipi_vc0>;
-                };
-            };
-        };
-    };
-
-  - |
-    #include <dt-bindings/clock/imx8mm-clock.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
-
-    mipi-csi@32e30000 {
-        compatible = "fsl,imx8mm-mipi-csi2";
-        reg = <0x32e30000 0x1000>;
-        interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-        clock-frequency = <333000000>;
-        clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
-                 <&clk IMX8MM_CLK_CSI1_ROOT>,
-                 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
-                 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
-        clock-names = "pclk", "wrap", "phy", "axi";
-        power-domains = <&mipi_pd>;
-
-        ports {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            port@0 {
-                reg = <0>;
-
-                imx8mm_mipi_csi_in: endpoint {
-                    remote-endpoint = <&imx477_out>;
-                    data-lanes = <1 2 3 4>;
-                };
-            };
-
-            port@1 {
-                reg = <1>;
-
-                imx8mm_mipi_csi_out: endpoint {
-                    remote-endpoint = <&csi_in>;
-                };
-            };
-        };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml
new file mode 100644
index 000000000000..001a0d9b71e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8 Image Sensing Interface
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The Image Sensing Interface (ISI) combines image processing pipelines with
+  DMA engines to process and capture frames originating from a variety of
+  sources. The inputs to the ISI go through Pixel Link interfaces, and their
+  number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+  CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mn-isi
+      - fsl,imx8mp-isi
+      - fsl,imx8ulp-isi
+      - fsl,imx91-isi
+      - fsl,imx93-isi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The AXI clock
+      - description: The APB clock
+      # TODO: Check if the per-channel ipg_proc_clk clocks need to be specified
+      # as well, in case some SoCs have the ability to control them separately.
+      # This may be the case of the i.MX8[DQ]X(P)
+
+  clock-names:
+    items:
+      - const: axi
+      - const: apb
+
+  fsl,blk-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle referencing the block control that contains the CSIS to ISI
+      gasket.
+
+  interrupts:
+    description: Processing pipeline interrupts, one per pipeline
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Ports represent the Pixel Link inputs to the ISI. Their number and
+      assignment are model-dependent. Each port shall have a single endpoint.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mn-isi
+              - fsl,imx8ulp-isi
+              - fsl,imx91-isi
+              - fsl,imx93-isi
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        ports:
+          properties:
+            port@0:
+              description: MIPI CSI-2 RX
+            port@1: false
+          required:
+            - port@0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-isi
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        ports:
+          properties:
+            port@0:
+              description: MIPI CSI-2 RX 0
+            port@1:
+              description: MIPI CSI-2 RX 1
+          required:
+            - port@0
+            - port@1
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: fsl,imx91-isi
+    then:
+      required:
+        - fsl,blk-ctrl
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mn-power.h>
+
+    isi@32e20000 {
+        compatible = "fsl,imx8mn-isi";
+        reg = <0x32e20000 0x100>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+                 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+        clock-names = "axi", "apb";
+        fsl,blk-ctrl = <&disp_blk_ctrl>;
+        power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                isi_in: endpoint {
+                    remote-endpoint = <&mipi_csi_out>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    isi@32e00000 {
+        compatible = "fsl,imx8mp-isi";
+        reg = <0x32e00000 0x4000>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+        clock-names = "axi", "apb";
+        fsl,blk-ctrl = <&media_blk_ctrl>;
+        power-domains = <&mediamix_pd>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                isi_in_0: endpoint {
+                    remote-endpoint = <&mipi_csi_0_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                isi_in_1: endpoint {
+                    remote-endpoint = <&mipi_csi_1_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
index 3cc6f42aeb76..b5aca3d2cc5c 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX8QXP/QM JPEG decoder/encoder Device Tree Bindings
+title: i.MX8QXP/QM JPEG decoder/encoder
 
 maintainers:
   - Mirela Rabulea <mirela.rabulea@nxp.com>
@@ -22,15 +22,24 @@ properties:
             - nxp,imx8qxp-jpgdec
             - nxp,imx8qxp-jpgenc
       - items:
-          - const: nxp,imx8qm-jpgdec
+          - enum:
+              - nxp,imx8qm-jpgdec
+              - nxp,imx95-jpgdec
           - const: nxp,imx8qxp-jpgdec
       - items:
-          - const: nxp,imx8qm-jpgenc
+          - enum:
+              - nxp,imx8qm-jpgenc
+              - nxp,imx95-jpgenc
           - const: nxp,imx8qxp-jpgenc
 
   reg:
     maxItems: 1
 
+  clocks:
+    items:
+      - description: AXI DMA engine clock for fetching JPEG bitstream from memory (per)
+      - description: IP bus clock for register access (ipg)
+
   interrupts:
     description: |
       There are 4 slots available in the IP, which the driver may use
@@ -43,25 +52,46 @@ properties:
     description:
       List of phandle and PM domain specifier as documented in
       Documentation/devicetree/bindings/power/power_domain.txt
-    minItems: 2               # Wrapper and 1 slot
+    minItems: 1               # Wrapper and all slots
     maxItems: 5               # Wrapper and 4 slots
 
 required:
   - compatible
   - reg
+  - clocks
   - interrupts
   - power-domains
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,imx95-jpgenc
+              - nxp,imx95-jpgdec
+    then:
+      properties:
+        power-domains:
+          maxItems: 1
+    else:
+      properties:
+        power-domains:
+          minItems: 2        # Wrapper and 1 slot
+
 additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/firmware/imx/rsrc.h>
 
     jpegdec: jpegdec@58400000 {
         compatible = "nxp,imx8qxp-jpgdec";
         reg = <0x58400000 0x00050000 >;
+        clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
+                 <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
         interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
@@ -76,6 +106,8 @@ examples:
     jpegenc: jpegenc@58450000 {
         compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc";
         reg = <0x58450000 0x00050000 >;
+        clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
+                 <&img_jpeg__lpcg IMX_LPCG_CLK_4>;
         interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
                      <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
index 9c04fa85ee5c..3389bab266a9 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -16,11 +16,19 @@ description: |-
 
 properties:
   compatible:
-    enum:
-      - fsl,imx8mq-mipi-csi2
+    oneOf:
+      - enum:
+          - fsl,imx8mq-mipi-csi2
+          - fsl,imx8qxp-mipi-csi2
+      - items:
+          - const: fsl,imx8qm-mipi-csi2
+          - const: fsl,imx8qxp-mipi-csi2
 
   reg:
-    maxItems: 1
+    items:
+      - description: MIPI CSI-2 RX host controller register.
+      - description: MIPI CSI-2 control and status register (csr).
+    minItems: 1
 
   clocks:
     items:
@@ -46,6 +54,7 @@ properties:
       - description: CORE_RESET reset register bit definition
       - description: PHY_REF_RESET reset register bit definition
       - description: ESC_RESET reset register bit definition
+    minItems: 1
 
   fsl,mipi-phy-gpr:
     description: |
@@ -58,11 +67,11 @@ properties:
       req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      items:
-        - description: The 'gpr' is the phandle to general purpose register node.
-        - description: The 'req_gpr' is the gpr register offset containing
-                       CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
-          maximum: 0xff
+      - items:
+          - description: The 'gpr' is the phandle to general purpose register node.
+          - description: The 'req_gpr' is the gpr register offset containing
+                        CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
+            maximum: 0xff
 
   interconnects:
     maxItems: 1
@@ -87,14 +96,12 @@ properties:
 
             properties:
               data-lanes:
+                minItems: 1
                 items:
-                  minItems: 1
-                  maxItems: 4
-                  items:
-                    - const: 1
-                    - const: 2
-                    - const: 3
-                    - const: 4
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
 
             required:
               - data-lanes
@@ -115,9 +122,30 @@ required:
   - clock-names
   - power-domains
   - resets
-  - fsl,mipi-phy-gpr
   - ports
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-mipi-csi2
+    then:
+      properties:
+        reg:
+          minItems: 2
+        resets:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          maxItems: 1
+        resets:
+          minItems: 3
+      required:
+        - fsl,mipi-phy-gpr
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
index 762be3f96ce9..19528262810a 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Hantro G1/G2 VPU codecs implemented on i.MX8MQ SoCs
+title: Hantro G1/G2 VPU codecs implemented on i.MX8M SoCs
 
 maintainers:
   - Philipp Zabel <p.zabel@pengutronix.de>
@@ -15,33 +14,21 @@ description:
 
 properties:
   compatible:
-    const: nxp,imx8mq-vpu
+    oneOf:
+      - const: nxp,imx8mq-vpu
+        deprecated: true
+      - const: nxp,imx8mq-vpu-g1
+      - const: nxp,imx8mq-vpu-g2
+      - const: nxp,imx8mm-vpu-g1
 
   reg:
-    maxItems: 3
-
-  reg-names:
-    items:
-      - const: g1
-      - const: g2
-      - const: ctrl
+    maxItems: 1
 
   interrupts:
-    maxItems: 2
-
-  interrupt-names:
-    items:
-      - const: g1
-      - const: g2
+    maxItems: 1
 
   clocks:
-    maxItems: 3
-
-  clock-names:
-    items:
-      - const: g1
-      - const: g2
-      - const: bus
+    maxItems: 1
 
   power-domains:
     maxItems: 1
@@ -49,31 +36,33 @@ properties:
 required:
   - compatible
   - reg
-  - reg-names
   - interrupts
-  - interrupt-names
   - clocks
-  - clock-names
 
 additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/clock/imx8mq-clock.h>
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-        vpu: video-codec@38300000 {
-                compatible = "nxp,imx8mq-vpu";
-                reg = <0x38300000 0x10000>,
-                      <0x38310000 0x10000>,
-                      <0x38320000 0x10000>;
-                reg-names = "g1", "g2", "ctrl";
-                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-                             <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-                interrupt-names = "g1", "g2";
-                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
-                         <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
-                         <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
-                clock-names = "g1", "g2", "bus";
-                power-domains = <&pgc_vpu>;
-        };
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/power/imx8mq-power.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    video-codec@38300000 {
+        compatible = "nxp,imx8mq-vpu-g1";
+        reg = <0x38300000 0x10000>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
+        power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
+    };
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/power/imx8mq-power.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    video-codec@38300000 {
+        compatible = "nxp,imx8mq-vpu-g2";
+        reg = <0x38310000 0x10000>;
+        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+        power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
index 304908072d72..7c8e0a905d89 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm CAMSS ISP
 
@@ -83,10 +82,6 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 1
-
               data-lanes:
                 description:
                   An array of physical data lanes indexes.
@@ -98,8 +93,11 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -114,16 +112,15 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
@@ -165,7 +162,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 
-    camss: camss@1b00000 {
+    camss: camss@1b0ac00 {
       compatible = "qcom,msm8916-camss";
 
       clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
index 59ab16ad12f1..da140c2e3d3f 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm MSM8916 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,16 +13,13 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,msm8916-venus
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   power-domains:
     maxItems: 1
 
@@ -39,19 +35,17 @@ properties:
   iommus:
     maxItems: 1
 
-  memory-region:
-    maxItems: 1
-
   video-decoder:
     type: object
 
     properties:
       compatible:
-        const: "venus-decoder"
+        const: venus-decoder
 
     required:
       - compatible
 
+    deprecated: true
     additionalProperties: false
 
   video-encoder:
@@ -59,63 +53,34 @@ properties:
 
     properties:
       compatible:
-        const: "venus-encoder"
+        const: venus-encoder
 
     required:
       - compatible
 
+    deprecated: true
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
-  - clocks
-  - clock-names
   - iommus
-  - memory-region
-  - video-decoder
-  - video-encoder
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,gcc-msm8916.h>
-
-        video-codec@1d00000 {
-                compatible = "qcom,msm8916-venus";
-                reg = <0x01d00000 0xff000>;
-                interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
-                        <&gcc GCC_VENUS0_AHB_CLK>,
-                        <&gcc GCC_VENUS0_AXI_CLK>;
-                clock-names = "core", "iface", "bus";
-                power-domains = <&gcc VENUS_GDSC>;
-                iommus = <&apps_iommu 5>;
-                memory-region = <&venus_mem>;
-
-                video-decoder {
-                        compatible = "venus-decoder";
-                };
-
-                video-encoder {
-                        compatible = "venus-encoder";
-                };
-        };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    video-codec@1d00000 {
+        compatible = "qcom,msm8916-venus";
+        reg = <0x01d00000 0xff000>;
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+                 <&gcc GCC_VENUS0_AHB_CLK>,
+                 <&gcc GCC_VENUS0_AXI_CLK>;
+        clock-names = "core", "iface", "bus";
+        power-domains = <&gcc VENUS_GDSC>;
+        iommus = <&apps_iommu 5>;
+        memory-region = <&venus_mem>;
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
new file mode 100644
index 000000000000..77b389d76a43
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml
@@ -0,0 +1,254 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,msm8939-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8939 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,msm8939-camss
+
+  reg:
+    maxItems: 11
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy0_clk_mux
+      - const: csiphy1
+      - const: csiphy1_clk_mux
+      - const: csid0
+      - const: csid1
+      - const: ispif
+      - const: csi_clk_mux
+      - const: vfe0
+      - const: csid2
+      - const: vfe0_vbif
+
+  clocks:
+    maxItems: 24
+
+  clock-names:
+    items:
+      - const: top_ahb
+      - const: ispif_ahb
+      - const: csiphy0_timer
+      - const: csiphy1_timer
+      - const: csi0_ahb
+      - const: csi0
+      - const: csi0_phy
+      - const: csi0_pix
+      - const: csi0_rdi
+      - const: csi1_ahb
+      - const: csi1
+      - const: csi1_phy
+      - const: csi1_pix
+      - const: csi1_rdi
+      - const: ahb
+      - const: vfe0
+      - const: csi_vfe0
+      - const: vfe_ahb
+      - const: vfe_axi
+      - const: csi2_ahb
+      - const: csi2
+      - const: csi2_phy
+      - const: csi2_pix
+      - const: csi2_rdi
+
+  interrupts:
+    maxItems: 7
+
+  interrupt-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csid0
+      - const: csid1
+      - const: ispif
+      - const: vfe0
+      - const: csid2
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: VFE GDSC - Video Front End, Global Distributed Switch
+          Controller.
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as 1.2V analog power supply.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    patternProperties:
+      "^port@[0-1]$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - vdda-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8939.h>
+
+    isp@1b0ac00 {
+        compatible = "qcom,msm8939-camss";
+
+        reg = <0x01b0ac00 0x200>,
+              <0x01b00030 0x4>,
+              <0x01b0b000 0x200>,
+              <0x01b00038 0x4>,
+              <0x01b08000 0x100>,
+              <0x01b08400 0x100>,
+              <0x01b0a000 0x500>,
+              <0x01b00020 0x10>,
+              <0x01b10000 0x1000>,
+              <0x01b08800 0x100>,
+              <0x01b40000 0x200>;
+
+        reg-names = "csiphy0",
+                    "csiphy0_clk_mux",
+                    "csiphy1",
+                    "csiphy1_clk_mux",
+                    "csid0",
+                    "csid1",
+                    "ispif",
+                    "csi_clk_mux",
+                    "vfe0",
+                    "csid2",
+                    "vfe0_vbif";
+
+        clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+                 <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+                 <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI0_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+                 <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI1_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+                 <&gcc GCC_CAMSS_AHB_CLK>,
+                 <&gcc GCC_CAMSS_VFE0_CLK>,
+                 <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+                 <&gcc GCC_CAMSS_VFE_AHB_CLK>,
+                 <&gcc GCC_CAMSS_VFE_AXI_CLK>,
+                 <&gcc GCC_CAMSS_CSI2_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI2_CLK>,
+                 <&gcc GCC_CAMSS_CSI2PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI2PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI2RDI_CLK>;
+
+        clock-names = "top_ahb",
+                      "ispif_ahb",
+                      "csiphy0_timer",
+                      "csiphy1_timer",
+                      "csi0_ahb",
+                      "csi0",
+                      "csi0_phy",
+                      "csi0_pix",
+                      "csi0_rdi",
+                      "csi1_ahb",
+                      "csi1",
+                      "csi1_phy",
+                      "csi1_pix",
+                      "csi1_rdi",
+                      "ahb",
+                      "vfe0",
+                      "csi_vfe0",
+                      "vfe_ahb",
+                      "vfe_axi",
+                      "csi2_ahb",
+                      "csi2",
+                      "csi2_phy",
+                      "csi2_pix",
+                      "csi2_rdi";
+
+        interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
+
+        interrupt-names = "csiphy0",
+                          "csiphy1",
+                          "csid0",
+                          "csid1",
+                          "ispif",
+                          "vfe0",
+                          "csid2";
+
+        iommus = <&apps_iommu 3>;
+
+        power-domains = <&gcc VFE_GDSC>;
+
+        vdda-supply = <&reg_1v2>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@1 {
+                reg = <1>;
+
+                csiphy1_ep: endpoint {
+                    data-lanes = <0 2>;
+                    remote-endpoint = <&sensor_ep>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
new file mode 100644
index 000000000000..6d776b0ca711
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,msm8953-camss.yaml
@@ -0,0 +1,337 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,msm8953-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8953 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Barnabas Czeman <barnabas.czeman@mainlining.org>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,msm8953-camss
+
+  clocks:
+    minItems: 30
+    maxItems: 30
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: csi0
+      - const: csi0_ahb
+      - const: csi0_phy
+      - const: csi0_pix
+      - const: csi0_rdi
+      - const: csi1
+      - const: csi1_ahb
+      - const: csi1_phy
+      - const: csi1_pix
+      - const: csi1_rdi
+      - const: csi2
+      - const: csi2_ahb
+      - const: csi2_phy
+      - const: csi2_pix
+      - const: csi2_rdi
+      - const: csi_vfe0
+      - const: csi_vfe1
+      - const: csiphy0_timer
+      - const: csiphy1_timer
+      - const: csiphy2_timer
+      - const: ispif_ahb
+      - const: micro_ahb
+      - const: top_ahb
+      - const: vfe0
+      - const: vfe0_ahb
+      - const: vfe0_axi
+      - const: vfe1
+      - const: vfe1_ahb
+      - const: vfe1_axi
+
+  interrupts:
+    minItems: 9
+    maxItems: 9
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: ispif
+      - const: vfe0
+      - const: vfe1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: VFE0 GDSC - Video Front End, Global Distributed Switch Controller.
+      - description: VFE1 GDSC - Video Front End, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: vfe0
+      - const: vfe1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index. Lane swapping
+                  is supported. Physical lane indexes;
+                  0, 2, 3, 4.
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+
+  reg:
+    minItems: 13
+    maxItems: 13
+
+  reg-names:
+    items:
+      - const: csi_clk_mux
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy0_clk_mux
+      - const: csiphy1
+      - const: csiphy1_clk_mux
+      - const: csiphy2
+      - const: csiphy2_clk_mux
+      - const: ispif
+      - const: vfe0
+      - const: vfe1
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8953.h>
+
+    camss: camss@1b00020 {
+        compatible = "qcom,msm8953-camss";
+
+        reg = <0x1b00020 0x10>,
+              <0x1b30000 0x100>,
+              <0x1b30400 0x100>,
+              <0x1b30800 0x100>,
+              <0x1b34000 0x1000>,
+              <0x1b00030 0x4>,
+              <0x1b35000 0x1000>,
+              <0x1b00038 0x4>,
+              <0x1b36000 0x1000>,
+              <0x1b00040 0x4>,
+              <0x1b31000 0x500>,
+              <0x1b10000 0x1000>,
+              <0x1b14000 0x1000>;
+        reg-names = "csi_clk_mux",
+                    "csid0",
+                    "csid1",
+                    "csid2",
+                    "csiphy0",
+                    "csiphy0_clk_mux",
+                    "csiphy1",
+                    "csiphy1_clk_mux",
+                    "csiphy2",
+                    "csiphy2_clk_mux",
+                    "ispif",
+                    "vfe0",
+                    "vfe1";
+
+        clocks = <&gcc GCC_CAMSS_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI0_CLK>,
+                 <&gcc GCC_CAMSS_CSI0_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI0RDI_CLK>,
+                 <&gcc GCC_CAMSS_CSI1_CLK>,
+                 <&gcc GCC_CAMSS_CSI1_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI1RDI_CLK>,
+                 <&gcc GCC_CAMSS_CSI2_CLK>,
+                 <&gcc GCC_CAMSS_CSI2_AHB_CLK>,
+                 <&gcc GCC_CAMSS_CSI2PHY_CLK>,
+                 <&gcc GCC_CAMSS_CSI2PIX_CLK>,
+                 <&gcc GCC_CAMSS_CSI2RDI_CLK>,
+                 <&gcc GCC_CAMSS_CSI_VFE0_CLK>,
+                 <&gcc GCC_CAMSS_CSI_VFE1_CLK>,
+                 <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+                 <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+                 <&gcc GCC_CAMSS_CSI2PHYTIMER_CLK>,
+                 <&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
+                 <&gcc GCC_CAMSS_MICRO_AHB_CLK>,
+                 <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+                 <&gcc GCC_CAMSS_VFE0_CLK>,
+                 <&gcc GCC_CAMSS_VFE0_AHB_CLK>,
+                 <&gcc GCC_CAMSS_VFE0_AXI_CLK>,
+                 <&gcc GCC_CAMSS_VFE1_CLK>,
+                 <&gcc GCC_CAMSS_VFE1_AHB_CLK>,
+                 <&gcc GCC_CAMSS_VFE1_AXI_CLK>;
+        clock-names = "ahb",
+                      "csi0",
+                      "csi0_ahb",
+                      "csi0_phy",
+                      "csi0_pix",
+                      "csi0_rdi",
+                      "csi1",
+                      "csi1_ahb",
+                      "csi1_phy",
+                      "csi1_pix",
+                      "csi1_rdi",
+                      "csi2",
+                      "csi2_ahb",
+                      "csi2_phy",
+                      "csi2_pix",
+                      "csi2_rdi",
+                      "csi_vfe0",
+                      "csi_vfe1",
+                      "csiphy0_timer",
+                      "csiphy1_timer",
+                      "csiphy2_timer",
+                      "ispif_ahb",
+                      "micro_ahb",
+                      "top_ahb",
+                      "vfe0",
+                      "vfe0_ahb",
+                      "vfe0_axi",
+                      "vfe1",
+                      "vfe1_ahb",
+                      "vfe1_axi";
+
+        interrupts = <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "csid0",
+                          "csid1",
+                          "csid2",
+                          "csiphy0",
+                          "csiphy1",
+                          "csiphy2",
+                          "ispif",
+                          "vfe0",
+                          "vfe1";
+
+        iommus = <&apps_iommu 0x14>;
+
+        power-domains = <&gcc VFE0_GDSC>,
+                        <&gcc VFE1_GDSC>;
+        power-domain-names = "vfe0", "vfe1";
+
+        vdda-supply = <&reg_2v8>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
index 38be41e932f0..a2025952fe95 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm CAMSS ISP
 
@@ -105,10 +104,6 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 description:
                   An array of physical data lanes indexes.
@@ -120,8 +115,12 @@ properties:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -136,16 +135,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
       port@2:
@@ -160,16 +159,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
       port@3:
@@ -184,16 +183,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
@@ -241,7 +240,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-msm8996.h>
     #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 
-    camss: camss@a00000 {
+    camss: camss@a34000 {
       compatible = "qcom,msm8996-camss";
 
       clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
index 199f45217b4a..56c16458e3bb 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm MSM8996 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,15 +13,14 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
-    const: qcom,msm8996-venus
-
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
+    enum:
+      - qcom,msm8996-venus
+      - qcom,msm8998-venus
 
   power-domains:
     maxItems: 1
@@ -37,12 +35,17 @@ properties:
       - const: bus
       - const: mbus
 
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: video-mem
+      - const: cpu-cfg
+
   iommus:
     maxItems: 20
 
-  memory-region:
-    maxItems: 1
-
   video-decoder:
     type: object
 
@@ -93,82 +96,62 @@ properties:
 
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
-  - clocks
-  - clock-names
   - iommus
-  - memory-region
   - video-decoder
   - video-encoder
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
-
-        video-codec@c00000 {
-                compatible = "qcom,msm8996-venus";
-                reg = <0x00c00000 0xff000>;
-                interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&mmcc VIDEO_CORE_CLK>,
-                         <&mmcc VIDEO_AHB_CLK>,
-                         <&mmcc VIDEO_AXI_CLK>,
-                         <&mmcc VIDEO_MAXI_CLK>;
-                clock-names = "core", "iface", "bus", "mbus";
-                power-domains = <&mmcc VENUS_GDSC>;
-                iommus =  <&venus_smmu 0x00>,
-                          <&venus_smmu 0x01>,
-                          <&venus_smmu 0x0a>,
-                          <&venus_smmu 0x07>,
-                          <&venus_smmu 0x0e>,
-                          <&venus_smmu 0x0f>,
-                          <&venus_smmu 0x08>,
-                          <&venus_smmu 0x09>,
-                          <&venus_smmu 0x0b>,
-                          <&venus_smmu 0x0c>,
-                          <&venus_smmu 0x0d>,
-                          <&venus_smmu 0x10>,
-                          <&venus_smmu 0x11>,
-                          <&venus_smmu 0x21>,
-                          <&venus_smmu 0x28>,
-                          <&venus_smmu 0x29>,
-                          <&venus_smmu 0x2b>,
-                          <&venus_smmu 0x2c>,
-                          <&venus_smmu 0x2d>,
-                          <&venus_smmu 0x31>;
-                memory-region = <&venus_mem>;
-
-                video-decoder {
-                        compatible = "venus-decoder";
-                        clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
-                        clock-names = "core";
-                        power-domains = <&mmcc VENUS_CORE0_GDSC>;
-                };
-
-                video-encoder {
-                        compatible = "venus-encoder";
-                        clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
-                        clock-names = "core";
-                        power-domains = <&mmcc VENUS_CORE1_GDSC>;
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+
+    video-codec@c00000 {
+        compatible = "qcom,msm8996-venus";
+        reg = <0x00c00000 0xff000>;
+        interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mmcc VIDEO_CORE_CLK>,
+                 <&mmcc VIDEO_AHB_CLK>,
+                 <&mmcc VIDEO_AXI_CLK>,
+                 <&mmcc VIDEO_MAXI_CLK>;
+        clock-names = "core", "iface", "bus", "mbus";
+        power-domains = <&mmcc VENUS_GDSC>;
+        iommus =  <&venus_smmu 0x00>,
+                  <&venus_smmu 0x01>,
+                  <&venus_smmu 0x0a>,
+                  <&venus_smmu 0x07>,
+                  <&venus_smmu 0x0e>,
+                  <&venus_smmu 0x0f>,
+                  <&venus_smmu 0x08>,
+                  <&venus_smmu 0x09>,
+                  <&venus_smmu 0x0b>,
+                  <&venus_smmu 0x0c>,
+                  <&venus_smmu 0x0d>,
+                  <&venus_smmu 0x10>,
+                  <&venus_smmu 0x11>,
+                  <&venus_smmu 0x21>,
+                  <&venus_smmu 0x28>,
+                  <&venus_smmu 0x29>,
+                  <&venus_smmu 0x2b>,
+                  <&venus_smmu 0x2c>,
+                  <&venus_smmu 0x2d>,
+                  <&venus_smmu 0x31>;
+        memory-region = <&venus_mem>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+            clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+            clock-names = "core";
+            power-domains = <&mmcc VENUS_CORE0_GDSC>;
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
+            clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+            clock-names = "core";
+            power-domains = <&mmcc VENUS_CORE1_GDSC>;
         };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,qcm2290-camss.yaml b/Documentation/devicetree/bindings/media/qcom,qcm2290-camss.yaml
new file mode 100644
index 000000000000..391d0f6f67ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,qcm2290-camss.yaml
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,qcm2290-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM2290 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Loic Poulain <loic.poulain@oss.qualcomm.com>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,qcm2290-camss
+
+  reg:
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: top
+      - const: csid0
+      - const: csid1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csitpg0
+      - const: csitpg1
+      - const: vfe0
+      - const: vfe1
+
+  clocks:
+    maxItems: 15
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: axi
+      - const: camnoc_nrt_axi
+      - const: camnoc_rt_axi
+      - const: csi0
+      - const: csi1
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: top_ahb
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe1
+      - const: vfe1_cphy_rx
+
+  interrupts:
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csitpg0
+      - const: csitpg1
+      - const: vfe0
+      - const: vfe1
+
+  interconnects:
+    maxItems: 3
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_mnoc
+      - const: sf_mnoc
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: GDSC CAMSS Block, Global Distributed Switch Controller.
+
+  vdd-csiphy-1p2-supply:
+    description:
+      Phandle to a 1.2V regulator supply to CSI PHYs.
+
+  vdd-csiphy-1p8-supply:
+    description:
+      Phandle to 1.8V regulator supply to CSI PHYs pll block.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    patternProperties:
+      "^port@[0-3]+$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+        description:
+          Input port for receiving CSI data from a CSIPHY.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - interconnects
+  - interconnect-names
+  - iommus
+  - power-domains
+  - vdd-csiphy-1p2-supply
+  - vdd-csiphy-1p8-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/interconnect/qcom,rpm-icc.h>
+    #include <dt-bindings/interconnect/qcom,qcm2290.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: camss@5c6e000 {
+            compatible = "qcom,qcm2290-camss";
+
+            reg = <0x0 0x5c11000 0x0 0x1000>,
+                  <0x0 0x5c6e000 0x0 0x1000>,
+                  <0x0 0x5c75000 0x0 0x1000>,
+                  <0x0 0x5c52000 0x0 0x1000>,
+                  <0x0 0x5c53000 0x0 0x1000>,
+                  <0x0 0x5c66000 0x0 0x400>,
+                  <0x0 0x5c68000 0x0 0x400>,
+                  <0x0 0x5c6f000 0x0 0x4000>,
+                  <0x0 0x5c76000 0x0 0x4000>;
+            reg-names = "top",
+                        "csid0",
+                        "csid1",
+                        "csiphy0",
+                        "csiphy1",
+                        "csitpg0",
+                        "csitpg1",
+                        "vfe0",
+                        "vfe1";
+
+            clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+                     <&gcc GCC_CAMSS_AXI_CLK>,
+                     <&gcc GCC_CAMSS_NRT_AXI_CLK>,
+                     <&gcc GCC_CAMSS_RT_AXI_CLK>,
+                     <&gcc GCC_CAMSS_TFE_0_CSID_CLK>,
+                     <&gcc GCC_CAMSS_TFE_1_CSID_CLK>,
+                     <&gcc GCC_CAMSS_CPHY_0_CLK>,
+                     <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
+                     <&gcc GCC_CAMSS_CPHY_1_CLK>,
+                     <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
+                     <&gcc GCC_CAMSS_TOP_AHB_CLK>,
+                     <&gcc GCC_CAMSS_TFE_0_CLK>,
+                     <&gcc GCC_CAMSS_TFE_0_CPHY_RX_CLK>,
+                     <&gcc GCC_CAMSS_TFE_1_CLK>,
+                     <&gcc GCC_CAMSS_TFE_1_CPHY_RX_CLK>;
+            clock-names = "ahb",
+                          "axi",
+                          "camnoc_nrt_axi",
+                          "camnoc_rt_axi",
+                          "csi0",
+                          "csi1",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "top_ahb",
+                          "vfe0",
+                          "vfe0_cphy_rx",
+                          "vfe1",
+                          "vfe1_cphy_rx";
+
+            interrupts = <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csiphy0",
+                              "csiphy1",
+                              "csitpg0",
+                              "csitpg1",
+                              "vfe0",
+                              "vfe1";
+
+            interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+                             &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>,
+                            <&mmrt_virt MASTER_CAMNOC_HF RPM_ALWAYS_TAG
+                             &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+                            <&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG
+                             &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
+            interconnect-names = "ahb",
+                                 "hf_mnoc",
+                                 "sf_mnoc";
+
+            iommus = <&apps_smmu 0x400 0x0>,
+                     <&apps_smmu 0x800 0x0>,
+                     <&apps_smmu 0x820 0x0>,
+                     <&apps_smmu 0x840 0x0>;
+
+            power-domains = <&gcc GCC_CAMSS_TOP_GDSC>;
+
+            vdd-csiphy-1p2-supply = <&pm4125_l5>;
+            vdd-csiphy-1p8-supply = <&pm4125_l13>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,qcm2290-venus.yaml b/Documentation/devicetree/bindings/media/qcom,qcm2290-venus.yaml
new file mode 100644
index 000000000000..3f3ee82fc878
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,qcm2290-venus.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,qcm2290-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM2290 Venus video encode and decode accelerators
+
+maintainers:
+  - Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
+
+description:
+  The Venus AR50_LITE IP is a video encode and decode accelerator present
+  on Qualcomm platforms.
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcm2290-venus
+
+  power-domains:
+    maxItems: 3
+
+  power-domain-names:
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: cx
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+      - const: throttle
+      - const: vcodec0_core
+      - const: vcodec0_bus
+
+  iommus:
+    maxItems: 5
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: video-mem
+      - const: cpu-cfg
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+required:
+  - compatible
+  - power-domain-names
+  - iommus
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/interconnect/qcom,qcm2290.h>
+    #include <dt-bindings/interconnect/qcom,rpm-icc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    venus: video-codec@5a00000 {
+        compatible = "qcom,qcm2290-venus";
+        reg = <0x5a00000 0xf0000>;
+
+        interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+
+        power-domains = <&gcc GCC_VENUS_GDSC>,
+                        <&gcc GCC_VCODEC0_GDSC>,
+                        <&rpmpd QCM2290_VDDCX>;
+        power-domain-names = "venus",
+                             "vcodec0",
+                             "cx";
+
+        operating-points-v2 = <&venus_opp_table>;
+
+        clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>,
+                 <&gcc GCC_VIDEO_AHB_CLK>,
+                 <&gcc GCC_VENUS_CTL_AXI_CLK>,
+                 <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>,
+                 <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>,
+                 <&gcc GCC_VCODEC0_AXI_CLK>;
+        clock-names = "core",
+                       "iface",
+                       "bus",
+                       "throttle",
+                       "vcodec0_core",
+                       "vcodec0_bus";
+
+        memory-region = <&pil_video_mem>;
+
+        iommus = <&apps_smmu 0x860 0x0>,
+                 <&apps_smmu 0x880 0x0>,
+                 <&apps_smmu 0x861 0x04>,
+                 <&apps_smmu 0x863 0x0>,
+                 <&apps_smmu 0x804 0xe0>;
+
+        interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG
+                         &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+                        <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+                         &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>;
+        interconnect-names = "video-mem",
+                             "cpu-cfg";
+
+        venus_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-133333333 {
+                opp-hz = /bits/ 64 <133333333>;
+                required-opps = <&rpmpd_opp_low_svs>;
+            };
+
+            opp-240000000 {
+                opp-hz = /bits/ 64 <240000000>;
+                required-opps = <&rpmpd_opp_svs>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,qcs8300-camss.yaml b/Documentation/devicetree/bindings/media/qcom,qcs8300-camss.yaml
new file mode 100644
index 000000000000..80a4540a22dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,qcs8300-camss.yaml
@@ -0,0 +1,336 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,qcs8300-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS8300 CAMSS ISP
+
+maintainers:
+  - Vikram Sharma <quic_vikramsa@quicinc.com>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,qcs8300-camss
+
+  reg:
+    maxItems: 21
+
+  reg-names:
+    items:
+      - const: csid_wrapper
+      - const: csid0
+      - const: csid1
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csid_lite2
+      - const: csid_lite3
+      - const: csid_lite4
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: tpg0
+      - const: tpg1
+      - const: tpg2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+      - const: vfe_lite2
+      - const: vfe_lite3
+      - const: vfe_lite4
+
+  clocks:
+    maxItems: 26
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: core_ahb
+      - const: cpas_ahb
+      - const: cpas_fast_ahb_clk
+      - const: cpas_vfe_lite
+      - const: cpas_vfe0
+      - const: cpas_vfe1
+      - const: csid
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy_rx
+      - const: gcc_axi_hf
+      - const: gcc_axi_sf
+      - const: icp_ahb
+      - const: vfe0
+      - const: vfe0_fast_ahb
+      - const: vfe1
+      - const: vfe1_fast_ahb
+      - const: vfe_lite
+      - const: vfe_lite_ahb
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    maxItems: 20
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csid_lite2
+      - const: csid_lite3
+      - const: csid_lite4
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: tpg0
+      - const: tpg1
+      - const: tpg2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+      - const: vfe_lite2
+      - const: vfe_lite3
+      - const: vfe_lite4
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_0
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: top
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    patternProperties:
+      "^port@[0-2]+$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSIPHY 0-2.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - interconnects
+  - interconnect-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp@ac78000 {
+            compatible = "qcom,qcs8300-camss";
+
+            reg = <0x0 0xac78000 0x0 0x1000>,
+                  <0x0 0xac7a000 0x0 0x0f00>,
+                  <0x0 0xac7c000 0x0 0x0f00>,
+                  <0x0 0xac84000 0x0 0x0f00>,
+                  <0x0 0xac88000 0x0 0x0f00>,
+                  <0x0 0xac8c000 0x0 0x0f00>,
+                  <0x0 0xac90000 0x0 0x0f00>,
+                  <0x0 0xac94000 0x0 0x0f00>,
+                  <0x0 0xac9c000 0x0 0x2000>,
+                  <0x0 0xac9e000 0x0 0x2000>,
+                  <0x0 0xaca0000 0x0 0x2000>,
+                  <0x0 0xacac000 0x0 0x0400>,
+                  <0x0 0xacad000 0x0 0x0400>,
+                  <0x0 0xacae000 0x0 0x0400>,
+                  <0x0 0xac4d000 0x0 0xd000>,
+                  <0x0 0xac60000 0x0 0xd000>,
+                  <0x0 0xac85000 0x0 0x0d00>,
+                  <0x0 0xac89000 0x0 0x0d00>,
+                  <0x0 0xac8d000 0x0 0x0d00>,
+                  <0x0 0xac91000 0x0 0x0d00>,
+                  <0x0 0xac95000 0x0 0x0d00>;
+            reg-names = "csid_wrapper",
+                        "csid0",
+                        "csid1",
+                        "csid_lite0",
+                        "csid_lite1",
+                        "csid_lite2",
+                        "csid_lite3",
+                        "csid_lite4",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "tpg0",
+                        "tpg1",
+                        "tpg2",
+                        "vfe0",
+                        "vfe1",
+                        "vfe_lite0",
+                        "vfe_lite1",
+                        "vfe_lite2",
+                        "vfe_lite3",
+                        "vfe_lite4";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CORE_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+                     <&camcc CAM_CC_CSID_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>,
+                     <&camcc CAM_CC_ICP_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+            clock-names = "camnoc_axi",
+                          "core_ahb",
+                          "cpas_ahb",
+                          "cpas_fast_ahb_clk",
+                          "cpas_vfe_lite",
+                          "cpas_vfe0",
+                          "cpas_vfe1",
+                          "csid",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy_rx",
+                          "gcc_axi_hf",
+                          "gcc_axi_sf",
+                          "icp_ahb",
+                          "vfe0",
+                          "vfe0_fast_ahb",
+                          "vfe1",
+                          "vfe1_fast_ahb",
+                          "vfe_lite",
+                          "vfe_lite_ahb",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+            interrupts = <GIC_SPI 565 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 564 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 545 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 546 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 547 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid_lite0",
+                              "csid_lite1",
+                              "csid_lite2",
+                              "csid_lite3",
+                              "csid_lite4",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "tpg0",
+                              "tpg1",
+                              "tpg2",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite0",
+                              "vfe_lite1",
+                              "vfe_lite2",
+                              "vfe_lite3",
+                              "vfe_lite4";
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                             &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+                            <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+            interconnect-names = "ahb",
+                                 "hf_0";
+
+            iommus = <&apps_smmu 0x2400 0x20>;
+
+            power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+            power-domain-names = "top";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sa8775p-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sa8775p-camss.yaml
new file mode 100644
index 000000000000..019caa2b09c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sa8775p-camss.yaml
@@ -0,0 +1,361 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sa8775p-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SA8775P CAMSS ISP
+
+maintainers:
+  - Vikram Sharma <quic_vikramsa@quicinc.com>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sa8775p-camss
+
+  reg:
+    maxItems: 22
+
+  reg-names:
+    items:
+      - const: csid_wrapper
+      - const: csid0
+      - const: csid1
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csid_lite2
+      - const: csid_lite3
+      - const: csid_lite4
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: tpg0
+      - const: tpg1
+      - const: tpg2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+      - const: vfe_lite2
+      - const: vfe_lite3
+      - const: vfe_lite4
+
+  clocks:
+    maxItems: 28
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: core_ahb
+      - const: cpas_ahb
+      - const: cpas_fast_ahb_clk
+      - const: cpas_vfe_lite
+      - const: cpas_vfe0
+      - const: cpas_vfe1
+      - const: csid
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy_rx
+      - const: gcc_axi_hf
+      - const: gcc_axi_sf
+      - const: icp_ahb
+      - const: vfe0
+      - const: vfe0_fast_ahb
+      - const: vfe1
+      - const: vfe1_fast_ahb
+      - const: vfe_lite
+      - const: vfe_lite_ahb
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    maxItems: 21
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csid_lite2
+      - const: csid_lite3
+      - const: csid_lite4
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: tpg0
+      - const: tpg1
+      - const: tpg2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+      - const: vfe_lite2
+      - const: vfe_lite3
+      - const: vfe_lite4
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_0
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: top
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    patternProperties:
+      "^port@[0-3]+$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSIPHY 0-3.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - interconnects
+  - interconnect-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+    #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp@ac78000 {
+            compatible = "qcom,sa8775p-camss";
+
+            reg = <0x0 0xac78000 0x0 0x1000>,
+                  <0x0 0xac7a000 0x0 0x0f00>,
+                  <0x0 0xac7c000 0x0 0x0f00>,
+                  <0x0 0xac84000 0x0 0x0f00>,
+                  <0x0 0xac88000 0x0 0x0f00>,
+                  <0x0 0xac8c000 0x0 0x0f00>,
+                  <0x0 0xac90000 0x0 0x0f00>,
+                  <0x0 0xac94000 0x0 0x0f00>,
+                  <0x0 0xac9c000 0x0 0x2000>,
+                  <0x0 0xac9e000 0x0 0x2000>,
+                  <0x0 0xaca0000 0x0 0x2000>,
+                  <0x0 0xaca2000 0x0 0x2000>,
+                  <0x0 0xacac000 0x0 0x0400>,
+                  <0x0 0xacad000 0x0 0x0400>,
+                  <0x0 0xacae000 0x0 0x0400>,
+                  <0x0 0xac4d000 0x0 0xd000>,
+                  <0x0 0xac5a000 0x0 0xd000>,
+                  <0x0 0xac85000 0x0 0x0d00>,
+                  <0x0 0xac89000 0x0 0x0d00>,
+                  <0x0 0xac8d000 0x0 0x0d00>,
+                  <0x0 0xac91000 0x0 0x0d00>,
+                  <0x0 0xac95000 0x0 0x0d00>;
+            reg-names = "csid_wrapper",
+                        "csid0",
+                        "csid1",
+                        "csid_lite0",
+                        "csid_lite1",
+                        "csid_lite2",
+                        "csid_lite3",
+                        "csid_lite4",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "tpg0",
+                        "tpg1",
+                        "tpg2",
+                        "vfe0",
+                        "vfe1",
+                        "vfe_lite0",
+                        "vfe_lite1",
+                        "vfe_lite2",
+                        "vfe_lite3",
+                        "vfe_lite4";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CORE_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+                     <&camcc CAM_CC_CSID_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>,
+                     <&camcc CAM_CC_ICP_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+            clock-names = "camnoc_axi",
+                          "core_ahb",
+                          "cpas_ahb",
+                          "cpas_fast_ahb_clk",
+                          "cpas_vfe_lite",
+                          "cpas_vfe0",
+                          "cpas_vfe1",
+                          "csid",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy_rx",
+                          "gcc_axi_hf",
+                          "gcc_axi_sf",
+                          "icp_ahb",
+                          "vfe0",
+                          "vfe0_fast_ahb",
+                          "vfe1",
+                          "vfe1_fast_ahb",
+                          "vfe_lite",
+                          "vfe_lite_ahb",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+            interrupts = <GIC_SPI 565 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 564 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 545 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 546 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 547 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid_lite0",
+                              "csid_lite1",
+                              "csid_lite2",
+                              "csid_lite3",
+                              "csid_lite4",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "tpg0",
+                              "tpg1",
+                              "tpg2",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite0",
+                              "vfe_lite1",
+                              "vfe_lite2",
+                              "vfe_lite3",
+                              "vfe_lite4";
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                             &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+                            <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+            interconnect-names = "ahb",
+                                 "hf_0";
+
+            iommus = <&apps_smmu 0x3400 0x20>;
+
+            power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+            power-domain-names = "top";
+
+            vdda-phy-supply = <&vreg_l4a_0p88>;
+            vdda-pll-supply = <&vreg_l1c_1p2>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
index 90b4af2c9724..bfd8b1ad4731 100644
--- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm SC7180 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,15 +13,17 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
-    const: qcom,sc7180-venus
-
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
+    oneOf:
+      - items:
+          - enum:
+              - qcom,qcs615-venus
+          - const: qcom,sc7180-venus
+      - const: qcom,sc7180-venus
 
   power-domains:
     minItems: 2
@@ -60,6 +61,10 @@ properties:
       - const: video-mem
       - const: cpu-cfg
 
+  operating-points-v2: true
+  opp-table:
+    type: object
+
   video-decoder:
     type: object
 
@@ -70,6 +75,7 @@ properties:
     required:
       - compatible
 
+    deprecated: true
     additionalProperties: false
 
   video-encoder:
@@ -82,64 +88,35 @@ properties:
     required:
       - compatible
 
+    deprecated: true
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
   - power-domain-names
-  - clocks
-  - clock-names
   - iommus
-  - memory-region
-  - video-decoder
-  - video-encoder
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,videocc-sc7180.h>
-
-        venus: video-codec@aa00000 {
-                compatible = "qcom,sc7180-venus";
-                reg = <0x0aa00000 0xff000>;
-                interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-                power-domains = <&videocc VENUS_GDSC>,
-                                <&videocc VCODEC0_GDSC>;
-                power-domain-names = "venus", "vcodec0";
-                clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
-                         <&videocc VIDEO_CC_VENUS_AHB_CLK>,
-                         <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
-                         <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
-                         <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
-                clock-names = "core", "iface", "bus",
-                              "vcodec0_core", "vcodec0_bus";
-                iommus = <&apps_smmu 0x0c00 0x60>;
-                memory-region = <&venus_mem>;
-
-                video-decoder {
-                        compatible = "venus-decoder";
-                };
-
-                video-encoder {
-                        compatible = "venus-encoder";
-                };
-        };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sc7180.h>
+
+    venus: video-codec@aa00000 {
+        compatible = "qcom,sc7180-venus";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&videocc VENUS_GDSC>,
+                        <&videocc VCODEC0_GDSC>;
+        power-domain-names = "venus", "vcodec0";
+        clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+        clock-names = "core", "iface", "bus",
+                      "vcodec0_core", "vcodec0_bus";
+        iommus = <&apps_smmu 0x0c00 0x60>;
+        memory-region = <&venus_mem>;
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml
new file mode 100644
index 000000000000..ee35e3bc97ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sc7280-camss.yaml
@@ -0,0 +1,425 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sc7280-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 CAMSS ISP
+
+maintainers:
+  - Azam Sadiq Pasha Kapatrala Syed <akapatra@quicinc.com>
+  - Hariram Purushothaman <hariramp@quicinc.com>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sc7280-camss
+
+  reg:
+    maxItems: 15
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  clocks:
+    maxItems: 33
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: gcc_axi_hf
+      - const: gcc_axi_sf
+      - const: icp_ahb
+      - const: vfe0
+      - const: vfe0_axi
+      - const: vfe0_cphy_rx
+      - const: vfe0_csid
+      - const: vfe1
+      - const: vfe1_axi
+      - const: vfe1_cphy_rx
+      - const: vfe1_csid
+      - const: vfe2
+      - const: vfe2_axi
+      - const: vfe2_cphy_rx
+      - const: vfe2_csid
+      - const: vfe_lite0
+      - const: vfe_lite0_cphy_rx
+      - const: vfe_lite0_csid
+      - const: vfe_lite1
+      - const: vfe_lite1_cphy_rx
+      - const: vfe_lite1_csid
+
+  interrupts:
+    maxItems: 15
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_0
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: ife2
+      - const: top
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSIPHY 0.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSIPHY 1.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSIPHY 2.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSIPHY 3.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSIPHY 4.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - interconnects
+  - interconnect-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,camcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp@acb3000 {
+            compatible = "qcom,sc7280-camss";
+
+            reg = <0x0 0x0acb3000 0x0 0x1000>,
+                  <0x0 0x0acba000 0x0 0x1000>,
+                  <0x0 0x0acc1000 0x0 0x1000>,
+                  <0x0 0x0acc8000 0x0 0x1000>,
+                  <0x0 0x0accf000 0x0 0x1000>,
+                  <0x0 0x0ace0000 0x0 0x2000>,
+                  <0x0 0x0ace2000 0x0 0x2000>,
+                  <0x0 0x0ace4000 0x0 0x2000>,
+                  <0x0 0x0ace6000 0x0 0x2000>,
+                  <0x0 0x0ace8000 0x0 0x2000>,
+                  <0x0 0x0acaf000 0x0 0x4000>,
+                  <0x0 0x0acb6000 0x0 0x4000>,
+                  <0x0 0x0acbd000 0x0 0x4000>,
+                  <0x0 0x0acc4000 0x0 0x4000>,
+                  <0x0 0x0accb000 0x0 0x4000>;
+            reg-names = "csid0",
+                        "csid1",
+                        "csid2",
+                        "csid_lite0",
+                        "csid_lite1",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "csiphy4",
+                        "vfe0",
+                        "vfe1",
+                        "vfe2",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>,
+                     <&camcc CAM_CC_ICP_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_2_CLK>,
+                     <&camcc CAM_CC_IFE_2_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_2_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_0_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_1_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>;
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "gcc_axi_hf",
+                          "gcc_axi_sf",
+                          "icp_ahb",
+                          "vfe0",
+                          "vfe0_axi",
+                          "vfe0_cphy_rx",
+                          "vfe0_csid",
+                          "vfe1",
+                          "vfe1_axi",
+                          "vfe1_cphy_rx",
+                          "vfe1_csid",
+                          "vfe2",
+                          "vfe2_axi",
+                          "vfe2_cphy_rx",
+                          "vfe2_csid",
+                          "vfe_lite0",
+                          "vfe_lite0_cphy_rx",
+                          "vfe_lite0_csid",
+                          "vfe_lite1",
+                          "vfe_lite1_cphy_rx",
+                          "vfe_lite1_csid";
+
+            interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid_lite0",
+                              "csid_lite1",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "csiphy4",
+                              "vfe0",
+                              "vfe1",
+                              "vfe2",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                             &cnoc2 SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+                            <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+            interconnect-names = "ahb",
+                                 "hf_0";
+
+            iommus = <&apps_smmu 0x800 0x4e0>;
+
+            power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+                            <&camcc CAM_CC_IFE_1_GDSC>,
+                            <&camcc CAM_CC_IFE_2_GDSC>,
+                            <&camcc CAM_CC_TITAN_TOP_GDSC>;
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "ife2",
+                                 "top";
+
+            vdda-phy-supply = <&vreg_l10c_0p88>;
+            vdda-pll-supply = <&vreg_l6b_1p2>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
index e2874683b4d5..413c5b4ee650 100644
--- a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sc7280-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sc7280-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm SC7280 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,16 +13,13 @@ description: |
   The Venus Iris2 IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,sc7280-venus
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   power-domains:
     minItems: 2
     maxItems: 3
@@ -47,11 +43,9 @@ properties:
       - const: vcodec_bus
 
   iommus:
+    minItems: 1
     maxItems: 2
 
-  memory-region:
-    maxItems: 1
-
   interconnects:
     maxItems: 2
 
@@ -60,6 +54,10 @@ properties:
       - const: cpu-cfg
       - const: video-mem
 
+  operating-points-v2: true
+  opp-table:
+    type: object
+
   video-decoder:
     type: object
 
@@ -70,6 +68,7 @@ properties:
     required:
       - compatible
 
+    deprecated: true
     additionalProperties: false
 
   video-encoder:
@@ -82,80 +81,51 @@ properties:
     required:
       - compatible
 
+    deprecated: true
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
   - power-domain-names
-  - clocks
-  - clock-names
   - iommus
-  - memory-region
-  - video-decoder
-  - video-encoder
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,videocc-sc7280.h>
-        #include <dt-bindings/interconnect/qcom,sc7280.h>
-        #include <dt-bindings/power/qcom-rpmpd.h>
-
-        venus: video-codec@aa00000 {
-                compatible = "qcom,sc7280-venus";
-                reg = <0x0aa00000 0xd0600>;
-                interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-
-                clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
-                         <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
-                         <&videocc VIDEO_CC_VENUS_AHB_CLK>,
-                         <&videocc VIDEO_CC_MVS0_CORE_CLK>,
-                         <&videocc VIDEO_CC_MVS0_AXI_CLK>;
-                clock-names = "core", "bus", "iface",
-                              "vcodec_core", "vcodec_bus";
-
-                power-domains = <&videocc MVSC_GDSC>,
-                                <&videocc MVS0_GDSC>,
-                                <&rpmhpd SC7280_CX>;
-                power-domain-names = "venus", "vcodec0", "cx";
-
-                interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
-                                <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
-                interconnect-names = "cpu-cfg", "video-mem";
-
-                iommus = <&apps_smmu 0x2180 0x20>,
-                         <&apps_smmu 0x2184 0x20>;
-
-                memory-region = <&video_mem>;
-
-                video-decoder {
-                        compatible = "venus-decoder";
-                };
-
-                video-encoder {
-                        compatible = "venus-encoder";
-                };
-
-                video-firmware {
-                        iommus = <&apps_smmu 0x21a2 0x0>;
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sc7280.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    venus: video-codec@aa00000 {
+        compatible = "qcom,sc7280-venus";
+        reg = <0x0aa00000 0xd0600>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
+                 <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_MVS0_CORE_CLK>,
+                 <&videocc VIDEO_CC_MVS0_AXI_CLK>;
+        clock-names = "core", "bus", "iface",
+                      "vcodec_core", "vcodec_bus";
+
+        power-domains = <&videocc MVSC_GDSC>,
+                        <&videocc MVS0_GDSC>,
+                        <&rpmhpd SC7280_CX>;
+        power-domain-names = "venus", "vcodec0", "cx";
+
+        interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
+                        <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "cpu-cfg", "video-mem";
+
+        iommus = <&apps_smmu 0x2180 0x20>,
+                 <&apps_smmu 0x2184 0x20>;
+
+        memory-region = <&video_mem>;
+
+        video-firmware {
+            iommus = <&apps_smmu 0x21a2 0x0>;
         };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
new file mode 100644
index 000000000000..c99fe4106eee
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
@@ -0,0 +1,531 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sc8280xp-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Camera Subsystem (CAMSS)
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-camss
+
+  clocks:
+    maxItems: 40
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_csid
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_csid
+      - const: vfe2_axi
+      - const: vfe2
+      - const: vfe2_cphy_rx
+      - const: vfe2_csid
+      - const: vfe3_axi
+      - const: vfe3
+      - const: vfe3_cphy_rx
+      - const: vfe3_csid
+      - const: vfe_lite0
+      - const: vfe_lite0_cphy_rx
+      - const: vfe_lite0_csid
+      - const: vfe_lite1
+      - const: vfe_lite1_cphy_rx
+      - const: vfe_lite1_csid
+      - const: vfe_lite2
+      - const: vfe_lite2_cphy_rx
+      - const: vfe_lite2_csid
+      - const: vfe_lite3
+      - const: vfe_lite3_cphy_rx
+      - const: vfe_lite3_csid
+      - const: gcc_axi_hf
+      - const: gcc_axi_sf
+
+  interrupts:
+    maxItems: 20
+
+  interrupt-names:
+    items:
+      - const: csid1_lite
+      - const: vfe_lite1
+      - const: csiphy3
+      - const: csid0
+      - const: vfe0
+      - const: csid1
+      - const: vfe1
+      - const: csid0_lite
+      - const: vfe_lite0
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csid2
+      - const: vfe2
+      - const: csid3_lite
+      - const: csid2_lite
+      - const: vfe_lite3
+      - const: vfe_lite2
+      - const: csid3
+      - const: vfe3
+
+  iommus:
+    maxItems: 16
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: cam_ahb
+      - const: cam_hf_mnoc
+      - const: cam_sf_mnoc
+      - const: cam_sf_icp_mnoc
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE3 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: ife2
+      - const: ife3
+      - const: top
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY0.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY1.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY2.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY3.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    maxItems: 20
+
+  reg-names:
+    items:
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy0
+      - const: csiphy1
+      - const: vfe0
+      - const: csid0
+      - const: vfe1
+      - const: csid1
+      - const: vfe2
+      - const: csid2
+      - const: vfe_lite0
+      - const: csid0_lite
+      - const: vfe_lite1
+      - const: csid1_lite
+      - const: vfe_lite2
+      - const: csid2_lite
+      - const: vfe_lite3
+      - const: csid3_lite
+      - const: vfe3
+      - const: csid3
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
+    #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: camss@ac5a000 {
+            compatible = "qcom,sc8280xp-camss";
+
+            reg = <0 0x0ac5a000 0 0x2000>,
+                  <0 0x0ac5c000 0 0x2000>,
+                  <0 0x0ac65000 0 0x2000>,
+                  <0 0x0ac67000 0 0x2000>,
+                  <0 0x0acaf000 0 0x4000>,
+                  <0 0x0acb3000 0 0x1000>,
+                  <0 0x0acb6000 0 0x4000>,
+                  <0 0x0acba000 0 0x1000>,
+                  <0 0x0acbd000 0 0x4000>,
+                  <0 0x0acc1000 0 0x1000>,
+                  <0 0x0acc4000 0 0x4000>,
+                  <0 0x0acc8000 0 0x1000>,
+                  <0 0x0accb000 0 0x4000>,
+                  <0 0x0accf000 0 0x1000>,
+                  <0 0x0acd2000 0 0x4000>,
+                  <0 0x0acd6000 0 0x1000>,
+                  <0 0x0acd9000 0 0x4000>,
+                  <0 0x0acdd000 0 0x1000>,
+                  <0 0x0ace0000 0 0x4000>,
+                  <0 0x0ace4000 0 0x1000>;
+
+            reg-names = "csiphy2",
+                        "csiphy3",
+                        "csiphy0",
+                        "csiphy1",
+                        "vfe0",
+                        "csid0",
+                        "vfe1",
+                        "csid1",
+                        "vfe2",
+                        "csid2",
+                        "vfe_lite0",
+                        "csid0_lite",
+                        "vfe_lite1",
+                        "csid1_lite",
+                        "vfe_lite2",
+                        "csid2_lite",
+                        "vfe_lite3",
+                        "csid3_lite",
+                        "vfe3",
+                        "csid3";
+
+            vdda-phy-supply = <&vreg_l6d>;
+            vdda-pll-supply = <&vreg_l4d>;
+
+            interrupts = <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 762 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 764 IRQ_TYPE_EDGE_RISING>;
+
+            interrupt-names = "csid1_lite",
+                              "vfe_lite1",
+                              "csiphy3",
+                              "csid0",
+                              "vfe0",
+                              "csid1",
+                              "vfe1",
+                              "csid0_lite",
+                              "vfe_lite0",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csid2",
+                              "vfe2",
+                              "csid3_lite",
+                              "csid2_lite",
+                              "vfe_lite3",
+                              "vfe_lite2",
+                              "csid3",
+                              "vfe3";
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc IFE_2_GDSC>,
+                            <&camcc IFE_3_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "ife2",
+                                 "ife3",
+                                 "top";
+
+            clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+                     <&camcc CAMCC_CPAS_AHB_CLK>,
+                     <&camcc CAMCC_CSIPHY0_CLK>,
+                     <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAMCC_CSIPHY1_CLK>,
+                     <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAMCC_CSIPHY2_CLK>,
+                     <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAMCC_CSIPHY3_CLK>,
+                     <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAMCC_IFE_0_AXI_CLK>,
+                     <&camcc CAMCC_IFE_0_CLK>,
+                     <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_0_CSID_CLK>,
+                     <&camcc CAMCC_IFE_1_AXI_CLK>,
+                     <&camcc CAMCC_IFE_1_CLK>,
+                     <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_1_CSID_CLK>,
+                     <&camcc CAMCC_IFE_2_AXI_CLK>,
+                     <&camcc CAMCC_IFE_2_CLK>,
+                     <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_2_CSID_CLK>,
+                     <&camcc CAMCC_IFE_3_AXI_CLK>,
+                     <&camcc CAMCC_IFE_3_CLK>,
+                     <&camcc CAMCC_IFE_3_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_3_CSID_CLK>,
+                     <&camcc CAMCC_IFE_LITE_0_CLK>,
+                     <&camcc CAMCC_IFE_LITE_0_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_LITE_0_CSID_CLK>,
+                     <&camcc CAMCC_IFE_LITE_1_CLK>,
+                     <&camcc CAMCC_IFE_LITE_1_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_LITE_1_CSID_CLK>,
+                     <&camcc CAMCC_IFE_LITE_2_CLK>,
+                     <&camcc CAMCC_IFE_LITE_2_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_LITE_2_CSID_CLK>,
+                     <&camcc CAMCC_IFE_LITE_3_CLK>,
+                     <&camcc CAMCC_IFE_LITE_3_CPHY_RX_CLK>,
+                     <&camcc CAMCC_IFE_LITE_3_CSID_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>;
+
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "vfe0_axi",
+                          "vfe0",
+                          "vfe0_cphy_rx",
+                          "vfe0_csid",
+                          "vfe1_axi",
+                          "vfe1",
+                          "vfe1_cphy_rx",
+                          "vfe1_csid",
+                          "vfe2_axi",
+                          "vfe2",
+                          "vfe2_cphy_rx",
+                          "vfe2_csid",
+                          "vfe3_axi",
+                          "vfe3",
+                          "vfe3_cphy_rx",
+                          "vfe3_csid",
+                          "vfe_lite0",
+                          "vfe_lite0_cphy_rx",
+                          "vfe_lite0_csid",
+                          "vfe_lite1",
+                          "vfe_lite1_cphy_rx",
+                          "vfe_lite1_csid",
+                          "vfe_lite2",
+                          "vfe_lite2_cphy_rx",
+                          "vfe_lite2_csid",
+                          "vfe_lite3",
+                          "vfe_lite3_cphy_rx",
+                          "vfe_lite3_csid",
+                          "gcc_axi_hf",
+                          "gcc_axi_sf";
+
+            iommus = <&apps_smmu 0x2000 0x4e0>,
+                     <&apps_smmu 0x2020 0x4e0>,
+                     <&apps_smmu 0x2040 0x4e0>,
+                     <&apps_smmu 0x2060 0x4e0>,
+                     <&apps_smmu 0x2080 0x4e0>,
+                     <&apps_smmu 0x20e0 0x4e0>,
+                     <&apps_smmu 0x20c0 0x4e0>,
+                     <&apps_smmu 0x20a0 0x4e0>,
+                     <&apps_smmu 0x2400 0x4e0>,
+                     <&apps_smmu 0x2420 0x4e0>,
+                     <&apps_smmu 0x2440 0x4e0>,
+                     <&apps_smmu 0x2460 0x4e0>,
+                     <&apps_smmu 0x2480 0x4e0>,
+                     <&apps_smmu 0x24e0 0x4e0>,
+                     <&apps_smmu 0x24c0 0x4e0>,
+                     <&apps_smmu 0x24a0 0x4e0>;
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_CAMERA_CFG 0>,
+                            <&mmss_noc MASTER_CAMNOC_HF 0 &mc_virt SLAVE_EBI1 0>,
+                            <&mmss_noc MASTER_CAMNOC_SF 0 &mc_virt SLAVE_EBI1 0>,
+                            <&mmss_noc MASTER_CAMNOC_ICP 0 &mc_virt SLAVE_EBI1 0>;
+            interconnect-names = "cam_ahb",
+                                 "cam_hf_mnoc",
+                                 "cam_sf_mnoc",
+                                 "cam_sf_icp_mnoc";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    csiphy_ep0: endpoint@0 {
+                        reg = <0>;
+                        clock-lanes = <7>;
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&sensor_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
index 841a1aafdd13..6e6ad8390e44 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm CAMSS ISP
 
@@ -84,6 +83,13 @@ properties:
       - const: vfe0
       - const: vfe1
 
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    items:
+      - const: vfe-mem
+
   iommus:
     maxItems: 4
 
@@ -111,16 +117,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -135,16 +141,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
       port@2:
@@ -159,16 +165,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
       port@3:
@@ -183,16 +189,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
@@ -240,7 +246,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sdm660.h>
     #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
 
-    camss: camss@ca00000 {
+    camss: camss@ca00020 {
       compatible = "qcom,sdm660-camss";
 
       clocks = <&mmcc CAMSS_AHB_CLK>,
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
index 33da7d3cfd38..a51835b22045 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sdm660-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sdm660-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm SDM660 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -15,13 +14,13 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,sdm660-venus
 
-  reg:
-    maxItems: 1
-
   clocks:
     maxItems: 4
 
@@ -40,15 +39,9 @@ properties:
       - const: cpu-cfg
       - const: video-mem
 
-  interrupts:
-    maxItems: 1
-
   iommus:
     maxItems: 20
 
-  memory-region:
-    maxItems: 1
-
   power-domains:
     maxItems: 1
 
@@ -102,85 +95,65 @@ properties:
 
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - clocks
-  - clock-names
-  - interrupts
   - iommus
-  - memory-region
-  - power-domains
   - video-decoder
   - video-encoder
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-        video-codec@cc00000 {
-                compatible = "qcom,sdm660-venus";
-                reg = <0x0cc00000 0xff000>;
-                clocks = <&mmcc VIDEO_CORE_CLK>,
-                         <&mmcc VIDEO_AHB_CLK>,
-                         <&mmcc VIDEO_AXI_CLK>,
-                         <&mmcc THROTTLE_VIDEO_AXI_CLK>;
-                clock-names = "core", "iface", "bus", "bus_throttle";
-                interconnects = <&gnoc 0 &mnoc 13>,
-                                <&mnoc 4 &bimc 5>;
-                interconnect-names = "cpu-cfg", "video-mem";
-                interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-                iommus = <&mmss_smmu 0x400>,
-                         <&mmss_smmu 0x401>,
-                         <&mmss_smmu 0x40a>,
-                         <&mmss_smmu 0x407>,
-                         <&mmss_smmu 0x40e>,
-                         <&mmss_smmu 0x40f>,
-                         <&mmss_smmu 0x408>,
-                         <&mmss_smmu 0x409>,
-                         <&mmss_smmu 0x40b>,
-                         <&mmss_smmu 0x40c>,
-                         <&mmss_smmu 0x40d>,
-                         <&mmss_smmu 0x410>,
-                         <&mmss_smmu 0x421>,
-                         <&mmss_smmu 0x428>,
-                         <&mmss_smmu 0x429>,
-                         <&mmss_smmu 0x42b>,
-                         <&mmss_smmu 0x42c>,
-                         <&mmss_smmu 0x42d>,
-                         <&mmss_smmu 0x411>,
-                         <&mmss_smmu 0x431>;
-                memory-region = <&venus_region>;
-                power-domains = <&mmcc VENUS_GDSC>;
-
-                video-decoder {
-                        compatible = "venus-decoder";
-                        clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
-                        clock-names = "vcodec0_core";
-                        power-domains = <&mmcc VENUS_CORE0_GDSC>;
-                };
-
-                video-encoder {
-                        compatible = "venus-encoder";
-                        clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
-                        clock-names = "vcodec0_core";
-                        power-domains = <&mmcc VENUS_CORE0_GDSC>;
-                };
+    #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    video-codec@cc00000 {
+        compatible = "qcom,sdm660-venus";
+        reg = <0x0cc00000 0xff000>;
+        clocks = <&mmcc VIDEO_CORE_CLK>,
+                 <&mmcc VIDEO_AHB_CLK>,
+                 <&mmcc VIDEO_AXI_CLK>,
+                 <&mmcc THROTTLE_VIDEO_AXI_CLK>;
+        clock-names = "core", "iface", "bus", "bus_throttle";
+        interconnects = <&gnoc 0 &mnoc 13>,
+                        <&mnoc 4 &bimc 5>;
+        interconnect-names = "cpu-cfg", "video-mem";
+        interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+        iommus = <&mmss_smmu 0x400>,
+                 <&mmss_smmu 0x401>,
+                 <&mmss_smmu 0x40a>,
+                 <&mmss_smmu 0x407>,
+                 <&mmss_smmu 0x40e>,
+                 <&mmss_smmu 0x40f>,
+                 <&mmss_smmu 0x408>,
+                 <&mmss_smmu 0x409>,
+                 <&mmss_smmu 0x40b>,
+                 <&mmss_smmu 0x40c>,
+                 <&mmss_smmu 0x40d>,
+                 <&mmss_smmu 0x410>,
+                 <&mmss_smmu 0x421>,
+                 <&mmss_smmu 0x428>,
+                 <&mmss_smmu 0x429>,
+                 <&mmss_smmu 0x42b>,
+                 <&mmss_smmu 0x42c>,
+                 <&mmss_smmu 0x42d>,
+                 <&mmss_smmu 0x411>,
+                 <&mmss_smmu 0x431>;
+        memory-region = <&venus_region>;
+        power-domains = <&mmcc VENUS_GDSC>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+            clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+            clock-names = "vcodec0_core";
+            power-domains = <&mmcc VENUS_CORE0_GDSC>;
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
+            clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+            clock-names = "vcodec0_core";
+            power-domains = <&mmcc VENUS_CORE0_GDSC>;
         };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
new file mode 100644
index 000000000000..35c40fe22376
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm670-camss.yaml
@@ -0,0 +1,318 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm670-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Richard Acayan <mailingradian@gmail.com>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sdm670-camss
+
+  reg:
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  interrupts:
+    maxItems: 9
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  clocks:
+    maxItems: 22
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: csi0
+      - const: csi1
+      - const: csi2
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: gcc_camera_ahb
+      - const: gcc_camera_axi
+      - const: soc_ahb
+      - const: vfe0
+      - const: vfe0_axi
+      - const: vfe0_cphy_rx
+      - const: vfe1
+      - const: vfe1_axi
+      - const: vfe1_cphy_rx
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: top
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY0.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY1.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data from CSIPHY2.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp@acb3000 {
+            compatible = "qcom,sdm670-camss";
+
+            reg = <0 0x0acb3000 0 0x1000>,
+                  <0 0x0acba000 0 0x1000>,
+                  <0 0x0acc8000 0 0x1000>,
+                  <0 0x0ac65000 0 0x1000>,
+                  <0 0x0ac66000 0 0x1000>,
+                  <0 0x0ac67000 0 0x1000>,
+                  <0 0x0acaf000 0 0x4000>,
+                  <0 0x0acb6000 0 0x4000>,
+                  <0 0x0acc4000 0 0x4000>;
+            reg-names = "csid0",
+                        "csid1",
+                        "csid2",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "vfe0",
+                        "vfe1",
+                        "vfe_lite";
+
+            interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&gcc GCC_CAMERA_AHB_CLK>,
+                     <&gcc GCC_CAMERA_AXI_CLK>,
+                     <&camcc CAM_CC_SOC_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>;
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "csi0",
+                          "csi1",
+                          "csi2",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "gcc_camera_ahb",
+                          "gcc_camera_axi",
+                          "soc_ahb",
+                          "vfe0",
+                          "vfe0_axi",
+                          "vfe0_cphy_rx",
+                          "vfe1",
+                          "vfe1_axi",
+                          "vfe1_cphy_rx",
+                          "vfe_lite",
+                          "vfe_lite_cphy_rx";
+
+            iommus = <&apps_smmu 0x808 0x0>,
+                     <&apps_smmu 0x810 0x8>,
+                     <&apps_smmu 0xc08 0x0>,
+                     <&apps_smmu 0xc10 0x8>;
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "top";
+
+            vdda-phy-supply = <&vreg_l1a_1p225>;
+            vdda-pll-supply = <&vreg_l8a_1p8>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    csiphy_ep0: endpoint {
+                        clock-lanes = <7>;
+                        data-lanes = <0 1 2 3>;
+                        remote-endpoint = <&front_sensor_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
index 9ca5dfa7f226..82bf4689d330 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm CAMSS ISP
 
@@ -105,15 +104,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                maxItems: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -128,16 +128,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
       port@2:
@@ -152,15 +152,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                maxItems: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
       port@3:
@@ -175,15 +176,16 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                maxItems: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
@@ -203,9 +205,13 @@ properties:
       - const: vfe1
       - const: vfe_lite
 
-  vdda-supply:
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
     description:
-      Definition of the regulator used as analog power supply.
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
 
 required:
   - clock-names
@@ -217,7 +223,8 @@ required:
   - power-domains
   - reg
   - reg-names
-  - vdda-supply
+  - vdda-phy-supply
+  - vdda-pll-supply
 
 additionalProperties: false
 
@@ -231,7 +238,7 @@ examples:
       #address-cells = <2>;
       #size-cells = <2>;
 
-      camss: camss@a00000 {
+      camss: camss@acb3000 {
         compatible = "qcom,sdm845-camss";
 
         clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
@@ -308,16 +315,16 @@ examples:
           "vfe_lite_cphy_rx",
           "vfe_lite_src";
 
-        interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-          <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-          <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-          <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-          <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-          <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-          <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-          <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-          <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-          <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+        interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+          <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+          <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+          <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+          <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+          <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+          <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+          <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+          <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+          <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>;
 
         interrupt-names = "csid0",
           "csid1",
@@ -361,7 +368,8 @@ examples:
           "vfe1",
           "vfe_lite";
 
-        vdda-supply = <&reg_2v8>;
+        vdda-phy-supply = <&vreg_l1a_0p875>;
+        vdda-pll-supply = <&vreg_l26a_1p2>;
 
         ports {
           #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
index 177bf81544b1..c839cb1ebc09 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm SDM845 Venus v2 video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,16 +13,13 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,sdm845-venus-v2
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   power-domains:
     minItems: 3
     maxItems: 4
@@ -52,8 +48,17 @@ properties:
   iommus:
     maxItems: 2
 
-  memory-region:
-    maxItems: 1
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: video-mem
+      - const: cpu-cfg
+
+  operating-points-v2: true
+  opp-table:
+    type: object
 
   video-core0:
     type: object
@@ -65,6 +70,7 @@ properties:
     required:
       - compatible
 
+    deprecated: true
     additionalProperties: false
 
   video-core1:
@@ -77,69 +83,40 @@ properties:
     required:
       - compatible
 
+    deprecated: true
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
   - power-domain-names
-  - clocks
-  - clock-names
   - iommus
-  - memory-region
-  - video-core0
-  - video-core1
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,videocc-sdm845.h>
-
-        video-codec@aa00000 {
-                compatible = "qcom,sdm845-venus-v2";
-                reg = <0x0aa00000 0xff000>;
-                interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
-                         <&videocc VIDEO_CC_VENUS_AHB_CLK>,
-                         <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
-                         <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
-                         <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
-                         <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
-                         <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
-                clock-names = "core", "iface", "bus",
-                              "vcodec0_core", "vcodec0_bus",
-                              "vcodec1_core", "vcodec1_bus";
-                power-domains = <&videocc VENUS_GDSC>,
-                                <&videocc VCODEC0_GDSC>,
-                                <&videocc VCODEC1_GDSC>;
-                power-domain-names = "venus", "vcodec0", "vcodec1";
-                iommus = <&apps_smmu 0x10a0 0x8>,
-                         <&apps_smmu 0x10b0 0x0>;
-                memory-region = <&venus_mem>;
-
-                video-core0 {
-                        compatible = "venus-decoder";
-                };
-
-                video-core1 {
-                        compatible = "venus-encoder";
-                };
-        };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+
+    video-codec@aa00000 {
+        compatible = "qcom,sdm845-venus-v2";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
+                 <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+                 <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+        clock-names = "core", "iface", "bus",
+                      "vcodec0_core", "vcodec0_bus",
+                      "vcodec1_core", "vcodec1_bus";
+        power-domains = <&videocc VENUS_GDSC>,
+                        <&videocc VCODEC0_GDSC>,
+                        <&videocc VCODEC1_GDSC>;
+        power-domain-names = "venus", "vcodec0", "vcodec1";
+        iommus = <&apps_smmu 0x10a0 0x8>,
+                 <&apps_smmu 0x10b0 0x0>;
+        memory-region = <&venus_mem>;
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
index 680f37726fdf..eabc0957b241 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm SDM845 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,16 +13,13 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,sdm845-venus
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   power-domains:
     maxItems: 1
 
@@ -39,9 +35,6 @@ properties:
   iommus:
     maxItems: 2
 
-  memory-region:
-    maxItems: 1
-
   video-core0:
     type: object
 
@@ -94,65 +87,45 @@ properties:
 
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
-  - clocks
-  - clock-names
   - iommus
-  - memory-region
   - video-core0
   - video-core1
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,videocc-sdm845.h>
-
-        video-codec@aa00000 {
-                compatible = "qcom,sdm845-venus";
-                reg = <0x0aa00000 0xff000>;
-                interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
-                         <&videocc VIDEO_CC_VENUS_AHB_CLK>,
-                         <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>;
-                clock-names = "core", "iface", "bus";
-                power-domains = <&videocc VENUS_GDSC>;
-                iommus = <&apps_smmu 0x10a0 0x8>,
-                         <&apps_smmu 0x10b0 0x0>;
-                memory-region = <&venus_mem>;
-
-                video-core0 {
-                        compatible = "venus-decoder";
-                        clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
-                                 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
-                        clock-names = "core", "bus";
-                        power-domains = <&videocc VCODEC0_GDSC>;
-                };
-
-                video-core1 {
-                        compatible = "venus-encoder";
-                        clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
-                                 <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
-                        clock-names = "core", "bus";
-                        power-domains = <&videocc VCODEC1_GDSC>;
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+
+    video-codec@aa00000 {
+        compatible = "qcom,sdm845-venus";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>;
+        clock-names = "core", "iface", "bus";
+        power-domains = <&videocc VENUS_GDSC>;
+        iommus = <&apps_smmu 0x10a0 0x8>,
+                 <&apps_smmu 0x10b0 0x0>;
+        memory-region = <&venus_mem>;
+
+        video-core0 {
+            compatible = "venus-decoder";
+            clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                     <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+            clock-names = "core", "bus";
+            power-domains = <&videocc VCODEC0_GDSC>;
+        };
+
+        video-core1 {
+            compatible = "venus-encoder";
+            clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+                     <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+            clock-names = "core", "bus";
+            power-domains = <&videocc VCODEC1_GDSC>;
         };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
new file mode 100644
index 000000000000..ebf68ff4ab96
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
@@ -0,0 +1,492 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sm8250-camss
+
+  clocks:
+    minItems: 37
+    maxItems: 37
+
+  clock-names:
+    items:
+      - const: cam_ahb_clk
+      - const: cam_hf_axi
+      - const: cam_sf_axi
+      - const: camnoc_axi
+      - const: camnoc_axi_src
+      - const: core_ahb
+      - const: cpas_ahb
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: csiphy5
+      - const: csiphy5_timer
+      - const: slow_ahb_src
+      - const: vfe0_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_csid
+      - const: vfe0_areg
+      - const: vfe1_ahb
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_csid
+      - const: vfe1_areg
+      - const: vfe_lite_ahb
+      - const: vfe_lite_axi
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    minItems: 14
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  iommus:
+    minItems: 8
+    maxItems: 8
+
+  interconnects:
+    minItems: 4
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: cam_ahb
+      - const: cam_hf_0_mnoc
+      - const: cam_sf_0_mnoc
+      - const: cam_sf_icp_mnoc
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,camcc-sm8250.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: camss@ac6a000 {
+            compatible = "qcom,sm8250-camss";
+
+            reg = <0 0xac6a000 0 0x2000>,
+                  <0 0xac6c000 0 0x2000>,
+                  <0 0xac6e000 0 0x1000>,
+                  <0 0xac70000 0 0x1000>,
+                  <0 0xac72000 0 0x1000>,
+                  <0 0xac74000 0 0x1000>,
+                  <0 0xacb4000 0 0xd000>,
+                  <0 0xacc3000 0 0xd000>,
+                  <0 0xacd9000 0 0x2200>,
+                  <0 0xacdb200 0 0x2200>;
+            reg-names = "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "csiphy4",
+                        "csiphy5",
+                        "vfe0",
+                        "vfe1",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            vdda-phy-supply = <&vreg_l5a_0p88>;
+            vdda-pll-supply = <&vreg_l9a_1p2>;
+
+            interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "csiphy4",
+                              "csiphy5",
+                              "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid3",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+
+            clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
+                     <&camcc CAM_CC_CORE_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY5_CLK>,
+                     <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+                     <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_0_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_0_AREG_CLK>,
+                     <&camcc CAM_CC_IFE_1_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_1_AREG_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+            clock-names = "cam_ahb_clk",
+                          "cam_hf_axi",
+                          "cam_sf_axi",
+                          "camnoc_axi",
+                          "camnoc_axi_src",
+                          "core_ahb",
+                          "cpas_ahb",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "csiphy5",
+                          "csiphy5_timer",
+                          "slow_ahb_src",
+                          "vfe0_ahb",
+                          "vfe0_axi",
+                          "vfe0",
+                          "vfe0_cphy_rx",
+                          "vfe0_csid",
+                          "vfe0_areg",
+                          "vfe1_ahb",
+                          "vfe1_axi",
+                          "vfe1",
+                          "vfe1_cphy_rx",
+                          "vfe1_csid",
+                          "vfe1_areg",
+                          "vfe_lite_ahb",
+                          "vfe_lite_axi",
+                          "vfe_lite",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+            iommus = <&apps_smmu 0x800 0x400>,
+                     <&apps_smmu 0x801 0x400>,
+                     <&apps_smmu 0x840 0x400>,
+                     <&apps_smmu 0x841 0x400>,
+                     <&apps_smmu 0xC00 0x400>,
+                     <&apps_smmu 0xC01 0x400>,
+                     <&apps_smmu 0xC40 0x400>,
+                     <&apps_smmu 0xC41 0x400>;
+
+            interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>,
+                            <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>,
+                            <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>,
+                            <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>;
+            interconnect-names = "cam_ahb",
+                                 "cam_hf_0_mnoc",
+                                 "cam_sf_0_mnoc",
+                                 "cam_sf_icp_mnoc";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
index ebf8f3d866a5..da54493220c9 100644
--- a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sm8250-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sm8250-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm SM8250 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,16 +13,13 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,sm8250-venus
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   power-domains:
     minItems: 2
     maxItems: 3
@@ -47,9 +43,6 @@ properties:
   iommus:
     maxItems: 1
 
-  memory-region:
-    maxItems: 1
-
   interconnects:
     maxItems: 2
 
@@ -58,6 +51,10 @@ properties:
       - const: cpu-cfg
       - const: video-mem
 
+  operating-points-v2: true
+  opp-table:
+    type: object
+
   resets:
     maxItems: 2
 
@@ -76,6 +73,7 @@ properties:
     required:
       - compatible
 
+    deprecated: true
     additionalProperties: false
 
   video-encoder:
@@ -88,79 +86,50 @@ properties:
     required:
       - compatible
 
+    deprecated: true
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
   - power-domain-names
-  - clocks
-  - clock-names
   - interconnects
   - interconnect-names
   - iommus
-  - memory-region
   - resets
   - reset-names
-  - video-decoder
-  - video-encoder
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,videocc-sm8250.h>
-        #include <dt-bindings/interconnect/qcom,sm8250.h>
-        #include <dt-bindings/clock/qcom,gcc-sm8250.h>
-        #include <dt-bindings/power/qcom-rpmpd.h>
-
-        venus: video-codec@aa00000 {
-            compatible = "qcom,sm8250-venus";
-            reg = <0x0aa00000 0xff000>;
-            interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-            power-domains = <&videocc MVS0C_GDSC>,
-                            <&videocc MVS0_GDSC>,
-                            <&rpmhpd SM8250_MX>;
-            power-domain-names = "venus", "vcodec0", "mx";
-
-            clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
-                     <&videocc VIDEO_CC_MVS0C_CLK>,
-                     <&videocc VIDEO_CC_MVS0_CLK>;
-            clock-names = "iface", "core", "vcodec0_core";
-
-            interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>,
-                            <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>;
-            interconnect-names = "cpu-cfg", "video-mem";
-
-            iommus = <&apps_smmu 0x2100 0x0400>;
-            memory-region = <&video_mem>;
-
-            resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
-                     <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
-            reset-names = "bus", "core";
-
-            video-decoder {
-                compatible = "venus-decoder";
-            };
-
-            video-encoder {
-                compatible = "venus-encoder";
-            };
-        };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sm8250.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    venus: video-codec@aa00000 {
+        compatible = "qcom,sm8250-venus";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&videocc MVS0C_GDSC>,
+                        <&videocc MVS0_GDSC>,
+                        <&rpmhpd RPMHPD_MX>;
+        power-domain-names = "venus", "vcodec0", "mx";
+
+        clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+                 <&videocc VIDEO_CC_MVS0C_CLK>,
+                 <&videocc VIDEO_CC_MVS0_CLK>;
+        clock-names = "iface", "core", "vcodec0_core";
+
+        interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>,
+                        <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>;
+        interconnect-names = "cpu-cfg", "video-mem";
+
+        iommus = <&apps_smmu 0x2100 0x0400>;
+        memory-region = <&video_mem>;
+
+        resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+                 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
+        reset-names = "bus", "core";
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
new file mode 100644
index 000000000000..cd34f14916b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8550-camss.yaml
@@ -0,0 +1,597 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8550-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Depeng Shao <quic_depengs@quicinc.com>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sm8550-camss
+
+  reg:
+    maxItems: 19
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csid_wrapper
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csiphy6
+      - const: csiphy7
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  clocks:
+    maxItems: 36
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: cpas_fast_ahb_clk
+      - const: cpas_ife_lite
+      - const: cpas_vfe0
+      - const: cpas_vfe1
+      - const: cpas_vfe2
+      - const: csid
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: csiphy5
+      - const: csiphy5_timer
+      - const: csiphy6
+      - const: csiphy6_timer
+      - const: csiphy7
+      - const: csiphy7_timer
+      - const: csiphy_rx
+      - const: gcc_axi_hf
+      - const: vfe0
+      - const: vfe0_fast_ahb
+      - const: vfe1
+      - const: vfe1_fast_ahb
+      - const: vfe2
+      - const: vfe2_fast_ahb
+      - const: vfe_lite
+      - const: vfe_lite_ahb
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    maxItems: 18
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csiphy6
+      - const: csiphy7
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_0_mnoc
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: ife2
+      - const: top
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.2V regulator supply to PHY refclk pll block.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI0.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI1.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI2.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI3.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI4.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI5.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@6:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI6.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@7:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data on CSI7.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - interconnects
+  - interconnect-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,sm8550-camcc.h>
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp@acb7000 {
+            compatible = "qcom,sm8550-camss";
+
+            reg = <0 0x0acb7000 0 0xd00>,
+                  <0 0x0acb9000 0 0xd00>,
+                  <0 0x0acbb000 0 0xd00>,
+                  <0 0x0acca000 0 0xa00>,
+                  <0 0x0acce000 0 0xa00>,
+                  <0 0x0acb6000 0 0x1000>,
+                  <0 0x0ace4000 0 0x2000>,
+                  <0 0x0ace6000 0 0x2000>,
+                  <0 0x0ace8000 0 0x2000>,
+                  <0 0x0acea000 0 0x2000>,
+                  <0 0x0acec000 0 0x2000>,
+                  <0 0x0acee000 0 0x2000>,
+                  <0 0x0acf0000 0 0x2000>,
+                  <0 0x0acf2000 0 0x2000>,
+                  <0 0x0ac62000 0 0xf000>,
+                  <0 0x0ac71000 0 0xf000>,
+                  <0 0x0ac80000 0 0xf000>,
+                  <0 0x0accb000 0 0x1800>,
+                  <0 0x0accf000 0 0x1800>;
+            reg-names = "csid0",
+                        "csid1",
+                        "csid2",
+                        "csid_lite0",
+                        "csid_lite1",
+                        "csid_wrapper",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "csiphy4",
+                        "csiphy5",
+                        "csiphy6",
+                        "csiphy7",
+                        "vfe0",
+                        "vfe1",
+                        "vfe2",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_2_CLK>,
+                     <&camcc CAM_CC_CSID_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY5_CLK>,
+                     <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY6_CLK>,
+                     <&camcc CAM_CC_CSI6PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY7_CLK>,
+                     <&camcc CAM_CC_CSI7PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_2_CLK>,
+                     <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "cpas_fast_ahb_clk",
+                          "cpas_ife_lite",
+                          "cpas_vfe0",
+                          "cpas_vfe1",
+                          "cpas_vfe2",
+                          "csid",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "csiphy5",
+                          "csiphy5_timer",
+                          "csiphy6",
+                          "csiphy6_timer",
+                          "csiphy7",
+                          "csiphy7_timer",
+                          "csiphy_rx",
+                          "gcc_axi_hf",
+                          "vfe0",
+                          "vfe0_fast_ahb",
+                          "vfe1",
+                          "vfe1_fast_ahb",
+                          "vfe2",
+                          "vfe2_fast_ahb",
+                          "vfe_lite",
+                          "vfe_lite_ahb",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+            interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 602 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 688 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid_lite0",
+                              "csid_lite1",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "csiphy4",
+                              "csiphy5",
+                              "csiphy6",
+                              "csiphy7",
+                              "vfe0",
+                              "vfe1",
+                              "vfe2",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                             &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+                            <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+            interconnect-names = "ahb",
+                                 "hf_0_mnoc";
+
+            iommus = <&apps_smmu 0x800 0x20>;
+
+            power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+                            <&camcc CAM_CC_IFE_1_GDSC>,
+                            <&camcc CAM_CC_IFE_2_GDSC>,
+                            <&camcc CAM_CC_TITAN_TOP_GDSC>;
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "ife2",
+                                 "top";
+
+            vdda-phy-supply = <&vreg_l1e_0p88>;
+            vdda-pll-supply = <&vreg_l3e_1p2>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    csiphy_ep0: endpoint@0 {
+                        reg = <0>;
+                        clock-lanes = <7>;
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&sensor_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8550-iris.yaml b/Documentation/devicetree/bindings/media/qcom,sm8550-iris.yaml
new file mode 100644
index 000000000000..9c4b760508b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8550-iris.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8550-iris.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm iris video encode and decode accelerators
+
+maintainers:
+  - Vikash Garodia <quic_vgarodia@quicinc.com>
+  - Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
+
+description:
+  The iris video processing unit is a video encode and decode accelerator
+  present on Qualcomm platforms.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sa8775p-iris
+              - qcom,x1e80100-iris
+          - const: qcom,sm8550-iris
+      - enum:
+          - qcom,qcs8300-iris
+          - qcom,sm8550-iris
+          - qcom,sm8650-iris
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 4
+
+  power-domain-names:
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: mxc
+      - const: mmcx
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+      - const: vcodec0_core
+
+  firmware-name:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: cpu-cfg
+      - const: video-mem
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: bus
+      - const: xo
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  dma-coherent: true
+
+  memory-region:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  opp-table:
+    type: object
+
+required:
+  - compatible
+  - power-domain-names
+  - interconnects
+  - interconnect-names
+  - resets
+  - reset-names
+  - iommus
+  - dma-coherent
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8650-iris
+    then:
+      properties:
+        resets:
+          minItems: 3
+        reset-names:
+          minItems: 3
+    else:
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/clock/qcom,sm8450-videocc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    video-codec@aa00000 {
+        compatible = "qcom,sm8550-iris";
+        reg = <0x0aa00000 0xf0000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+        power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+                        <&videocc VIDEO_CC_MVS0_GDSC>,
+                        <&rpmhpd RPMHPD_MXC>,
+                        <&rpmhpd RPMHPD_MMCX>;
+        power-domain-names = "venus", "vcodec0", "mxc", "mmcx";
+
+        clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+                 <&videocc VIDEO_CC_MVS0C_CLK>,
+                 <&videocc VIDEO_CC_MVS0_CLK>;
+        clock-names = "iface", "core", "vcodec0_core";
+
+        interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+                         &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ALWAYS>,
+                        <&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+                         &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+        interconnect-names = "cpu-cfg", "video-mem";
+
+        memory-region = <&video_mem>;
+
+        resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+        reset-names = "bus";
+
+        iommus = <&apps_smmu 0x1940 0x0000>,
+                 <&apps_smmu 0x1947 0x0000>;
+        dma-coherent;
+
+        operating-points-v2 = <&iris_opp_table>;
+
+        iris_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-240000000 {
+                opp-hz = /bits/ 64 <240000000>;
+                required-opps = <&rpmhpd_opp_svs>,
+                                <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-338000000 {
+                opp-hz = /bits/ 64 <338000000>;
+                required-opps = <&rpmhpd_opp_svs>,
+                                <&rpmhpd_opp_svs>;
+            };
+
+            opp-366000000 {
+                opp-hz = /bits/ 64 <366000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>,
+                                <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-444000000 {
+                opp-hz = /bits/ 64 <444000000>;
+                required-opps = <&rpmhpd_opp_turbo>,
+                                <&rpmhpd_opp_turbo>;
+            };
+
+            opp-533333334 {
+                opp-hz = /bits/ 64 <533333334>;
+                required-opps = <&rpmhpd_opp_turbo_l1>,
+                                <&rpmhpd_opp_turbo_l1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8650-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8650-camss.yaml
new file mode 100644
index 000000000000..9c8de722601e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8650-camss.yaml
@@ -0,0 +1,375 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8650-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8650 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sm8650-camss
+
+  reg:
+    maxItems: 17
+
+  reg-names:
+    items:
+      - const: csid_wrapper
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  clocks:
+    maxItems: 33
+
+  clock-names:
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: cpas_fast_ahb
+      - const: cpas_vfe0
+      - const: cpas_vfe1
+      - const: cpas_vfe2
+      - const: cpas_vfe_lite
+      - const: csid
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: csiphy5
+      - const: csiphy5_timer
+      - const: csiphy_rx
+      - const: gcc_axi_hf
+      - const: qdss_debug_xo
+      - const: vfe0
+      - const: vfe0_fast_ahb
+      - const: vfe1
+      - const: vfe1_fast_ahb
+      - const: vfe2
+      - const: vfe2_fast_ahb
+      - const: vfe_lite
+      - const: vfe_lite_ahb
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    maxItems: 16
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: vfe0
+      - const: vfe1
+      - const: vfe2
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_mnoc
+
+  iommus:
+    maxItems: 3
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: ife2
+      - const: top
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    patternProperties:
+      "^port@[0-5]$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+        description:
+          Input port for receiving CSI data from a CSIPHY.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+
+  vdd-csiphy01-0p9-supply:
+    description:
+      Phandle to a 0.9V regulator supply to CSIPHY0 and CSIPHY1 IP blocks.
+
+  vdd-csiphy01-1p2-supply:
+    description:
+      Phandle to a 1.2V regulator supply to CSIPHY0 and CSIPHY1 IP blocks.
+
+  vdd-csiphy24-0p9-supply:
+    description:
+      Phandle to a 0.9V regulator supply to CSIPHY2 and CSIPHY4 IP blocks.
+
+  vdd-csiphy24-1p2-supply:
+    description:
+      Phandle to a 1.2V regulator supply to CSIPHY2 and CSIPHY4 IP blocks.
+
+  vdd-csiphy35-0p9-supply:
+    description:
+      Phandle to a 0.9V regulator supply to CSIPHY3 and CSIPHY5 IP blocks.
+
+  vdd-csiphy35-1p2-supply:
+    description:
+      Phandle to a 1.2V regulator supply to CSIPHY3 and CSIPHY5 IP blocks.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - power-domain-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8650-camcc.h>
+    #include <dt-bindings/clock/qcom,sm8650-gcc.h>
+    #include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp@acb6000 {
+            compatible = "qcom,sm8650-camss";
+            reg = <0 0x0acb6000 0 0x1000>,
+                  <0 0x0acb8000 0 0x1000>,
+                  <0 0x0acba000 0 0x1000>,
+                  <0 0x0acbc000 0 0x1000>,
+                  <0 0x0accb000 0 0x1000>,
+                  <0 0x0acd0000 0 0x1000>,
+                  <0 0x0ace4000 0 0x2000>,
+                  <0 0x0ace6000 0 0x2000>,
+                  <0 0x0ace8000 0 0x2000>,
+                  <0 0x0acea000 0 0x2000>,
+                  <0 0x0acec000 0 0x2000>,
+                  <0 0x0acee000 0 0x2000>,
+                  <0 0x0ac62000 0 0xf000>,
+                  <0 0x0ac71000 0 0xf000>,
+                  <0 0x0ac80000 0 0xf000>,
+                  <0 0x0accc000 0 0x2000>,
+                  <0 0x0acd1000 0 0x2000>;
+            reg-names = "csid_wrapper",
+                        "csid0",
+                        "csid1",
+                        "csid2",
+                        "csid_lite0",
+                        "csid_lite1",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "csiphy4",
+                        "csiphy5",
+                        "vfe0",
+                        "vfe1",
+                        "vfe2",
+                        "vfe_lite0",
+                        "vfe_lite1";
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_2_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_CSID_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY5_CLK>,
+                     <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&camcc CAM_CC_QDSS_DEBUG_XO_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_2_CLK>,
+                     <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+            clock-names = "camnoc_axi",
+                          "cpas_ahb",
+                          "cpas_fast_ahb",
+                          "cpas_vfe0",
+                          "cpas_vfe1",
+                          "cpas_vfe2",
+                          "cpas_vfe_lite",
+                          "csid",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "csiphy5",
+                          "csiphy5_timer",
+                          "csiphy_rx",
+                          "gcc_axi_hf",
+                          "qdss_debug_xo",
+                          "vfe0",
+                          "vfe0_fast_ahb",
+                          "vfe1",
+                          "vfe1_fast_ahb",
+                          "vfe2",
+                          "vfe2_fast_ahb",
+                          "vfe_lite",
+                          "vfe_lite_ahb",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+            interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 602 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 688 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid_lite0",
+                              "csid_lite1",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "csiphy4",
+                              "csiphy5",
+                              "vfe0",
+                              "vfe1",
+                              "vfe2",
+                              "vfe_lite0",
+                              "vfe_lite1";
+            interconnects = <&gem_noc MASTER_APPSS_PROC 0
+                             &config_noc SLAVE_CAMERA_CFG 0>,
+                            <&mmss_noc MASTER_CAMNOC_HF 0
+                             &mc_virt SLAVE_EBI1 0>;
+            interconnect-names = "ahb", "hf_mnoc";
+            iommus = <&apps_smmu 0x800 0x20>,
+                     <&apps_smmu 0x18a0 0x40>,
+                     <&apps_smmu 0x1860 0x00>;
+            power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+                            <&camcc CAM_CC_IFE_1_GDSC>,
+                            <&camcc CAM_CC_IFE_2_GDSC>,
+                            <&camcc CAM_CC_TITAN_TOP_GDSC>;
+            power-domain-names = "ife0", "ife1", "ife2", "top";
+            vdd-csiphy01-0p9-supply = <&vreg_0p9>;
+            vdd-csiphy01-1p2-supply = <&vreg_1p2>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+
+                    csiphy1_ep: endpoint {
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&camera_sensor>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8750-iris.yaml b/Documentation/devicetree/bindings/media/qcom,sm8750-iris.yaml
new file mode 100644
index 000000000000..c42d3470bdac
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8750-iris.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8750-iris.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8750 SoC Iris video encoder and decoder
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  The Iris video processing unit on Qualcomm SM8750 SoC is a video encode and
+  decode accelerator.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8750-iris
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: iface          # AXI0
+      - const: core
+      - const: vcodec0_core
+      - const: iface1         # AXI1
+      - const: core_freerun
+      - const: vcodec0_core_freerun
+
+  dma-coherent: true
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: cpu-cfg
+      - const: video-mem
+
+  iommus:
+    maxItems: 2
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  power-domains:
+    maxItems: 4
+
+  power-domain-names:
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: mxc
+      - const: mmcx
+
+  resets:
+    maxItems: 4
+
+  reset-names:
+    items:
+      - const: bus0
+      - const: bus1
+      - const: core
+      - const: vcodec0_core
+
+required:
+  - compatible
+  - dma-coherent
+  - interconnects
+  - interconnect-names
+  - iommus
+  - power-domain-names
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,sm8750-gcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,sm8750-rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/power/qcom,rpmhpd.h>
+
+    video-codec@aa00000 {
+        compatible = "qcom,sm8750-iris";
+        reg = <0x0aa00000 0xf0000>;
+
+        clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+                 <&videocc_mvs0c_clk>,
+                 <&videocc_mvs0_clk>,
+                 <&gcc GCC_VIDEO_AXI1_CLK>,
+                 <&videocc_mvs0c_freerun_clk>,
+                 <&videocc_mvs0_freerun_clk>;
+        clock-names = "iface",
+                      "core",
+                      "vcodec0_core",
+                      "iface1",
+                      "core_freerun",
+                      "vcodec0_core_freerun";
+
+        dma-coherent;
+        iommus = <&apps_smmu 0x1940 0>,
+                 <&apps_smmu 0x1947 0>;
+
+        interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                         &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+                        <&mmss_noc MASTER_VIDEO_MVP QCOM_ICC_TAG_ALWAYS
+                         &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+        interconnect-names = "cpu-cfg",
+                             "video-mem";
+
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+        operating-points-v2 = <&iris_opp_table>;
+
+        memory-region = <&video_mem>;
+
+        power-domains = <&videocc_mvs0c_gdsc>,
+                        <&videocc_mvs0_gdsc>,
+                        <&rpmhpd RPMHPD_MXC>,
+                        <&rpmhpd RPMHPD_MMCX>;
+        power-domain-names = "venus",
+                             "vcodec0",
+                             "mxc",
+                             "mmcx";
+
+        resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+                 <&gcc GCC_VIDEO_AXI1_CLK_ARES>,
+                 <&videocc_mvs0c_freerun_clk_ares>,
+                 <&videocc_mvs0_freerun_clk_ares>;
+        reset-names = "bus0",
+                      "bus1",
+                      "core",
+                      "vcodec0_core";
+
+        iris_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-240000000 {
+                opp-hz = /bits/ 64 <240000000>;
+                required-opps = <&rpmhpd_opp_low_svs_d1>,
+                                <&rpmhpd_opp_low_svs_d1>;
+            };
+
+            opp-338000000 {
+                opp-hz = /bits/ 64 <338000000>;
+                required-opps = <&rpmhpd_opp_low_svs>,
+                                <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-420000000 {
+                opp-hz = /bits/ 64 <420000000>;
+                required-opps = <&rpmhpd_opp_svs>,
+                                <&rpmhpd_opp_svs>;
+            };
+
+            opp-444000000 {
+                opp-hz = /bits/ 64 <444000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>,
+                                <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-533333334 {
+                opp-hz = /bits/ 64 <533333334>;
+                required-opps = <&rpmhpd_opp_nom>,
+                                <&rpmhpd_opp_nom>;
+            };
+
+            opp-630000000 {
+                opp-hz = /bits/ 64 <630000000>;
+                required-opps = <&rpmhpd_opp_turbo>,
+                                <&rpmhpd_opp_turbo>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,venus-common.yaml b/Documentation/devicetree/bindings/media/qcom,venus-common.yaml
new file mode 100644
index 000000000000..3153d91f9d18
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,venus-common.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,venus-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC Venus Video Encode and Decode Accelerators Common Properties
+
+maintainers:
+  - Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
+  - Vikash Garodia <quic_vgarodia@quicinc.com>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+properties:
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 7
+
+  clock-names:
+    minItems: 3
+    maxItems: 7
+
+  firmware-name:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 20
+
+  memory-region:
+    maxItems: 1
+
+  power-domains:
+    minItems: 1
+    maxItems: 4
+
+  power-domain-names:
+    minItems: 1
+    maxItems: 4
+
+  video-firmware:
+    type: object
+    additionalProperties: false
+
+    description: |
+      Firmware subnode is needed when the platform does not
+      have TrustZone.
+
+    properties:
+      iommus:
+        maxItems: 1
+
+    required:
+      - iommus
+
+required:
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - memory-region
+  - power-domains
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
new file mode 100644
index 000000000000..b87a13479a4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml
@@ -0,0 +1,367 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,x1e80100-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 Camera Subsystem (CAMSS)
+
+maintainers:
+  - Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+
+description:
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,x1e80100-camss
+
+  reg:
+    maxItems: 17
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csid_wrapper
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy4
+      - const: csitpg0
+      - const: csitpg1
+      - const: csitpg2
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  clocks:
+    maxItems: 29
+
+  clock-names:
+    items:
+      - const: camnoc_nrt_axi
+      - const: camnoc_rt_axi
+      - const: core_ahb
+      - const: cpas_ahb
+      - const: cpas_fast_ahb
+      - const: cpas_vfe0
+      - const: cpas_vfe1
+      - const: cpas_vfe_lite
+      - const: cphy_rx_clk_src
+      - const: csid
+      - const: csid_csiphy_rx
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: gcc_axi_hf
+      - const: gcc_axi_sf
+      - const: vfe0
+      - const: vfe0_fast_ahb
+      - const: vfe1
+      - const: vfe1_fast_ahb
+      - const: vfe_lite
+      - const: vfe_lite_ahb
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    maxItems: 13
+
+  interrupt-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid_lite0
+      - const: csid_lite1
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy4
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: ahb
+      - const: hf_mnoc
+      - const: sf_mnoc
+      - const: sf_icp_mnoc
+
+  iommus:
+    maxItems: 8
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  power-domain-names:
+    items:
+      - const: ife0
+      - const: ife1
+      - const: top
+
+  vdd-csiphy-0p8-supply:
+    description:
+      Phandle to a 0.8V regulator supply to a PHY.
+
+  vdd-csiphy-1p2-supply:
+    description:
+      Phandle to 1.2V regulator supply to a PHY.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    patternProperties:
+      "^port@[0-3]$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+        description:
+          Input port for receiving CSI data from a CSIPHY.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              bus-type:
+                enum:
+                  - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+            required:
+              - data-lanes
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - interconnects
+  - interconnect-names
+  - iommus
+  - power-domains
+  - power-domain-names
+  - vdd-csiphy-0p8-supply
+  - vdd-csiphy-1p2-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+    #include <dt-bindings/clock/qcom,x1e80100-camcc.h>
+    #include <dt-bindings/interconnect/qcom,icc.h>
+    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: isp@acb7000 {
+            compatible = "qcom,x1e80100-camss";
+
+            reg = <0 0x0acb7000 0 0x2000>,
+                  <0 0x0acb9000 0 0x2000>,
+                  <0 0x0acbb000 0 0x2000>,
+                  <0 0x0acc6000 0 0x1000>,
+                  <0 0x0acca000 0 0x1000>,
+                  <0 0x0acb6000 0 0x1000>,
+                  <0 0x0ace4000 0 0x1000>,
+                  <0 0x0ace6000 0 0x1000>,
+                  <0 0x0ace8000 0 0x1000>,
+                  <0 0x0acec000 0 0x4000>,
+                  <0 0x0acf6000 0 0x1000>,
+                  <0 0x0acf7000 0 0x1000>,
+                  <0 0x0acf8000 0 0x1000>,
+                  <0 0x0ac62000 0 0x4000>,
+                  <0 0x0ac71000 0 0x4000>,
+                  <0 0x0acc7000 0 0x2000>,
+                  <0 0x0accb000 0 0x2000>;
+
+            reg-names = "csid0",
+                        "csid1",
+                        "csid2",
+                        "csid_lite0",
+                        "csid_lite1",
+                        "csid_wrapper",
+                        "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy4",
+                        "csitpg0",
+                        "csitpg1",
+                        "csitpg2",
+                        "vfe0",
+                        "vfe1",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
+                     <&camcc CAM_CC_CORE_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+                     <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_CPHY_RX_CLK_SRC>,
+                     <&camcc CAM_CC_CSID_CLK>,
+                     <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+
+            clock-names = "camnoc_nrt_axi",
+                          "camnoc_rt_axi",
+                          "core_ahb",
+                          "cpas_ahb",
+                          "cpas_fast_ahb",
+                          "cpas_vfe0",
+                          "cpas_vfe1",
+                          "cpas_vfe_lite",
+                          "cphy_rx_clk_src",
+                          "csid",
+                          "csid_csiphy_rx",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "gcc_axi_hf",
+                          "gcc_axi_sf",
+                          "vfe0",
+                          "vfe0_fast_ahb",
+                          "vfe1",
+                          "vfe1_fast_ahb",
+                          "vfe_lite",
+                          "vfe_lite_ahb",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+           interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+                        <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+
+            interrupt-names = "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid_lite0",
+                              "csid_lite1",
+                              "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy4",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+                             &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+                            <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+                            <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+                            <&mmss_noc MASTER_CAMNOC_ICP QCOM_ICC_TAG_ALWAYS
+                             &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+            interconnect-names = "ahb",
+                                 "hf_mnoc",
+                                 "sf_mnoc",
+                                 "sf_icp_mnoc";
+
+            iommus = <&apps_smmu 0x800 0x60>,
+                     <&apps_smmu 0x860 0x60>,
+                     <&apps_smmu 0x1800 0x60>,
+                     <&apps_smmu 0x1860 0x60>,
+                     <&apps_smmu 0x18e0 0x00>,
+                     <&apps_smmu 0x1980 0x20>,
+                     <&apps_smmu 0x1900 0x00>,
+                     <&apps_smmu 0x19a0 0x20>;
+
+            power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+                            <&camcc CAM_CC_IFE_1_GDSC>,
+                            <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+            power-domain-names = "ife0",
+                                 "ife1",
+                                 "top";
+
+            vdd-csiphy-0p8-supply = <&csiphy_0p8_supply>;
+            vdd-csiphy-1p2-supply = <&csiphy_1p2_supply>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    csiphy_ep0: endpoint {
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&sensor_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml b/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml
new file mode 100644
index 000000000000..1fc62a1d8eda
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/raspberrypi,pispbe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi PiSP Image Signal Processor (ISP) Back End
+
+maintainers:
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+description: |
+  The Raspberry Pi PiSP Image Signal Processor (ISP) Back End is an image
+  processor that fetches images in Bayer or Grayscale format from DRAM memory
+  in tiles and produces images consumable by applications.
+
+  The full ISP documentation is available at
+  https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm2712-pispbe
+      - const: raspberrypi,pispbe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp@880000  {
+             compatible = "brcm,bcm2712-pispbe", "raspberrypi,pispbe";
+             reg = <0x10 0x00880000 0x0 0x4000>;
+             interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+             clocks = <&firmware_clocks 7>;
+             iommus = <&iommu2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml b/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml
new file mode 100644
index 000000000000..eba5394719b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/raspberrypi,rp1-cfe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi PiSP Camera Front End
+
+maintainers:
+  - Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
+  - Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
+
+description: |
+  The Raspberry Pi PiSP Camera Front End is a module in Raspberrypi 5's RP1 I/O
+  controller, that contains:
+  - MIPI D-PHY
+  - MIPI CSI-2 receiver
+  - Simple image processor (called PiSP Front End, or FE)
+
+  The FE documentation is available at:
+  https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf
+
+  The PHY and CSI-2 receiver part have no public documentation.
+
+properties:
+  compatible:
+    items:
+      - const: raspberrypi,rp1-cfe
+
+  reg:
+    items:
+      - description: CSI-2 registers
+      - description: D-PHY registers
+      - description: MIPI CFG (a simple top-level mux) registers
+      - description: FE registers
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description: CSI-2 RX Port
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 4
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    rp1 {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      csi@110000 {
+        compatible = "raspberrypi,rp1-cfe";
+        reg = <0xc0 0x40110000 0x0 0x100>,
+              <0xc0 0x40114000 0x0 0x100>,
+              <0xc0 0x40120000 0x0 0x100>,
+              <0xc0 0x40124000 0x0 0x1000>;
+
+        interrupts = <42>;
+
+        clocks = <&rp1_clocks>;
+
+        port {
+          csi_ep: endpoint {
+            remote-endpoint = <&cam_endpoint>;
+            data-lanes = <1 2>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
index d4c541c4b164..dedc5a4b81ec 100644
--- a/Documentation/devicetree/bindings/media/rc.yaml
+++ b/Documentation/devicetree/bindings/media/rc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/rc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic Infrared Remote Controller Device Tree Bindings
+title: Generic Infrared Remote Controller
 
 maintainers:
   - Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -12,13 +12,13 @@ maintainers:
 
 properties:
   $nodename:
-    pattern: "^ir(@[a-f0-9]+)?$"
+    pattern: "^ir(-receiver)?(@[a-f0-9]+)?$"
 
   linux,rc-map-name:
     description:
       Specifies the scancode/key mapping table defined in-kernel for
       the remote controller.
-    $ref: '/schemas/types.yaml#/definitions/string'
+    $ref: /schemas/types.yaml#/definitions/string
     enum:
       - rc-adstech-dvb-t-pci
       - rc-alink-dtu-m
@@ -39,6 +39,7 @@ properties:
       - rc-avertv-303
       - rc-azurewave-ad-tu700
       - rc-beelink-gs1
+      - rc-beelink-mxiii
       - rc-behold
       - rc-behold-columbus
       - rc-budget-ci-old
@@ -55,6 +56,7 @@ properties:
       - rc-dm1105-nec
       - rc-dntv-live-dvb-t
       - rc-dntv-live-dvbt-pro
+      - rc-dreambox
       - rc-dtt200u
       - rc-dvbsky
       - rc-dvico-mce
@@ -101,6 +103,7 @@ properties:
       - rc-msi-digivox-iii
       - rc-msi-tvanywhere
       - rc-msi-tvanywhere-plus
+      - rc-mygica-utv3
       - rc-nebula
       - rc-nec-terratec-cinergy-xs
       - rc-norwood
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
index 50e0740af15a..d527fc42c3fd 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/renesas,ceu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas Capture Engine Unit (CEU) Bindings
+title: Renesas Capture Engine Unit (CEU)
 
 maintainers:
   - Jacopo Mondi <jacopo+renesas@jmondi.org>
diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
index e6a036721082..80b77875874d 100644
--- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
@@ -31,6 +31,8 @@ properties:
           - renesas,r8a77980-csi2 # R-Car V3H
           - renesas,r8a77990-csi2 # R-Car E3
           - renesas,r8a779a0-csi2 # R-Car V3U
+          - renesas,r8a779g0-csi2 # R-Car V4H
+          - renesas,r8a779h0-csi2 # R-Car V4M
 
   reg:
     maxItems: 1
@@ -67,7 +69,10 @@ properties:
                 maxItems: 1
 
               data-lanes:
-                maxItems: 1
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
 
             required:
               - clock-lanes
diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.yaml b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
index 43f2fed8cd33..cf92dfe69637 100644
--- a/Documentation/devicetree/bindings/media/renesas,fcp.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
@@ -21,15 +21,34 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - renesas,fcpv # FCP for VSP
-      - renesas,fcpf # FCP for FDP
+    oneOf:
+      - enum:
+          - renesas,fcpv # FCP for VSP
+          - renesas,fcpf # FCP for FDP
+      - items:
+          - enum:
+              - renesas,r9a07g043u-fcpvd # RZ/G2UL
+              - renesas,r9a07g044-fcpvd # RZ/G2{L,LC}
+              - renesas,r9a07g054-fcpvd # RZ/V2L
+              - renesas,r9a09g056-fcpvd # RZ/V2N
+              - renesas,r9a09g057-fcpvd # RZ/V2H(P)
+          - const: renesas,fcpv         # Generic FCP for VSP fallback
 
   reg:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Main clock
+      - description: Register access clock
+      - description: Video clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: pclk
+      - const: vclk
 
   iommus:
     maxItems: 1
@@ -49,6 +68,28 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g043u-fcpvd
+              - renesas,r9a07g044-fcpvd
+              - renesas,r9a07g054-fcpvd
+              - renesas,r9a09g057-fcpvd
+    then:
+      properties:
+        clocks:
+          minItems: 3
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
+
 examples:
   # R8A7795 (R-Car H3) FCP for VSP-D1
   - |
diff --git a/Documentation/devicetree/bindings/media/renesas,isp.yaml b/Documentation/devicetree/bindings/media/renesas,isp.yaml
index 514857d36f6b..d25e020f5e5e 100644
--- a/Documentation/devicetree/bindings/media/renesas,isp.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,isp.yaml
@@ -21,20 +21,59 @@ properties:
     items:
       - enum:
           - renesas,r8a779a0-isp # V3U
+          - renesas,r8a779g0-isp # V4H
+          - renesas,r8a779h0-isp # V4M
+      - const: renesas,rcar-gen4-isp # Generic R-Car Gen4
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: cs
+      - const: core
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: cs
+      - const: core
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: cs
+      - const: core
 
   power-domains:
     maxItems: 1
 
   resets:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: cs
+      - const: core
+
+  renesas,vspx:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle to the companion VSPX responsible for the Streaming Bridge
+      functionality. The Streaming Bridge is responsible for feeding image
+      and configuration data to the ISP when operating in memory-to-memory
+      mode.
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -100,10 +139,14 @@ properties:
 required:
   - compatible
   - reg
+  - reg-names
   - interrupts
+  - interrupt-names
   - clocks
+  - clock-names
   - power-domains
   - resets
+  - reset-names
   - ports
 
 additionalProperties: false
@@ -115,12 +158,19 @@ examples:
     #include <dt-bindings/power/r8a779a0-sysc.h>
 
     isp1: isp@fed20000 {
-            compatible = "renesas,r8a779a0-isp";
-            reg = <0xfed20000 0x10000>;
-            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 613>;
+            compatible = "renesas,r8a779a0-isp", "renesas,rcar-gen4-isp";
+            reg = <0xfed20000 0x10000>, <0xfee00000 0x100000>;
+            reg-names = "cs", "core";
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "cs", "core";
+            clocks = <&cpg CPG_MOD 613>, <&cpg CPG_MOD 17>;
+            clock-names = "cs", "core";
             power-domains = <&sysc R8A779A0_PD_A3ISP01>;
-            resets = <&cpg 613>;
+            resets = <&cpg 613>, <&cpg 17>;
+            reset-names = "cs", "core";
+
+            renesas,vspx = <&vspx1>;
 
             ports {
                     #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/media/renesas,jpu.txt b/Documentation/devicetree/bindings/media/renesas,jpu.txt
deleted file mode 100644
index d3436e5190f9..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,jpu.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Renesas JPEG Processing Unit
-
-The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding
-and decoding function conforming to the JPEG baseline process, so that the JPU
-can encode image data and decode JPEG data quickly.
-
-Required properties:
-- compatible: "renesas,jpu-<soctype>", "renesas,rcar-gen2-jpu" as fallback.
-	Examples with soctypes are:
-	  - "renesas,jpu-r8a7790" for R-Car H2
-	  - "renesas,jpu-r8a7791" for R-Car M2-W
-	  - "renesas,jpu-r8a7792" for R-Car V2H
-	  - "renesas,jpu-r8a7793" for R-Car M2-N
-
-  - reg: Base address and length of the registers block for the JPU.
-  - interrupts: JPU interrupt specifier.
-  - clocks: A phandle + clock-specifier pair for the JPU functional clock.
-
-Example: R8A7790 (R-Car H2) JPU node
-	jpeg-codec@fe980000 {
-		compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
-		reg = <0 0xfe980000 0 0x10300>;
-		interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7790_CLK_JPU>;
-	};
diff --git a/Documentation/devicetree/bindings/media/renesas,jpu.yaml b/Documentation/devicetree/bindings/media/renesas,jpu.yaml
new file mode 100644
index 000000000000..2f55968e864f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,jpu.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,jpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas JPEG Processing Unit
+
+maintainers:
+  - Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
+
+description:
+  The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding
+  and decoding function conforming to the JPEG baseline process, so that the
+  JPU can encode image data and decode JPEG data quickly.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,jpu-r8a7790      # R-Car H2
+          - renesas,jpu-r8a7791      # R-Car M2-W
+          - renesas,jpu-r8a7792      # R-Car V2H
+          - renesas,jpu-r8a7793      # R-Car M2-N
+      - const: renesas,rcar-gen2-jpu # R-Car Gen2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    jpeg-codec@fe980000 {
+            compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
+            reg = <0xfe980000 0x10300>;
+            interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 106>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 106>;
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,r9a09g057-ivc.yaml b/Documentation/devicetree/bindings/media/renesas,r9a09g057-ivc.yaml
new file mode 100644
index 000000000000..c09cbd8c9e35
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,r9a09g057-ivc.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,r9a09g057-ivc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2H(P) Input Video Control Block
+
+maintainers:
+  - Daniel Scally <dan.scally@ideasonboard.com>
+
+description:
+  The IVC block is a module that takes video frames from memory and feeds them
+  to the Image Signal Processor for processing.
+
+properties:
+  compatible:
+    const: renesas,r9a09g057-ivc # RZ/V2H(P)
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Input Video Control block register access clock
+      - description: Video input data AXI bus clock
+      - description: ISP system clock
+
+  clock-names:
+    items:
+      - const: reg
+      - const: axi
+      - const: isp
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: Input Video Control block register access reset
+      - description: Video input data AXI bus reset
+      - description: ISP core reset
+
+  reset-names:
+    items:
+      - const: reg
+      - const: axi
+      - const: isp
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Output parallel video bus
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/properties/endpoint
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas,r9a09g057-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    isp-input@16040000 {
+      compatible = "renesas,r9a09g057-ivc";
+      reg = <0x16040000 0x230>;
+
+      clocks = <&cpg CPG_MOD 0xe3>,
+               <&cpg CPG_MOD 0xe4>,
+               <&cpg CPG_MOD 0xe5>;
+      clock-names = "reg", "axi", "isp";
+
+      power-domains = <&cpg>;
+
+      resets = <&cpg 0xd4>,
+               <&cpg 0xd1>,
+               <&cpg 0xd3>;
+      reset-names = "reg", "axi", "isp";
+
+      interrupts = <GIC_SPI 861 IRQ_TYPE_EDGE_RISING>;
+
+      port {
+        ivc_out: endpoint {
+          remote-endpoint = <&isp_in>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
new file mode 100644
index 000000000000..47e18690fa57
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The CRU image processing module is a data conversion module equipped with pixel
+  color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
+  parallel (including ITU-R BT.656) input are provided as the image sensor interface.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-cru       # RZ/G2UL
+              - renesas,r9a07g044-cru       # RZ/G2{L,LC}
+              - renesas,r9a07g054-cru       # RZ/V2L
+          - const: renesas,rzg2l-cru
+      - const: renesas,r9a09g047-cru        # RZ/G3E
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    oneOf:
+      - items:
+          - description: CRU Interrupt for image_conv
+          - description: CRU Interrupt for image_conv_err
+          - description: CRU AXI master error interrupt
+      - items:
+          - description: CRU Interrupt for image_conv
+          - description: CRU AXI master error interrupt
+          - description: CRU Video Data AXI Master Address 0 Write End interrupt
+          - description: CRU Statistics data AXI master addr 0 write end interrupt
+          - description: CRU Video statistics data AXI master addr 0 write end interrupt
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: image_conv
+          - const: image_conv_err
+          - const: axi_mst_err
+      - items:
+          - const: image_conv
+          - const: axi_mst_err
+          - const: vd_addr_wend
+          - const: sd_addr_wend
+          - const: vsd_addr_wend
+
+  clocks:
+    items:
+      - description: CRU Main clock
+      - description: CRU Register access clock
+      - description: CRU image transfer clock
+
+  clock-names:
+    items:
+      - const: video
+      - const: apb
+      - const: axi
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CRU_PRESETN reset terminal
+      - description: CRU_ARESETN reset terminal
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: aresetn
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing a parallel input source.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active: true
+              vsync-active: true
+              bus-width: true
+              data-shift: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, describing the Image Processing module connected to the
+          CSI-2 receiver.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g044-cru
+              - renesas,r9a07g054-cru
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+        interrupt-names:
+          maxItems: 3
+        ports:
+          required:
+            - port@0
+            - port@1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g043-cru
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+        interrupt-names:
+          maxItems: 3
+        ports:
+          properties:
+            port@0: false
+          required:
+            - port@1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g047-cru
+    then:
+      properties:
+        interrupts:
+          minItems: 5
+        interrupt-names:
+          minItems: 5
+        ports:
+          properties:
+            port@0: false
+          required:
+            - port@1
+
+additionalProperties: false
+
+examples:
+  # Device node example with CSI-2
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cru: video@10830000 {
+        compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
+        reg = <0x10830000 0x400>;
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+        clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
+        clock-names = "video", "apb", "axi";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_CRU_PRESETN>,
+                 <&cpg R9A07G044_CRU_ARESETN>;
+        reset-names = "presetn", "aresetn";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                cru_parallel_in: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&ov5642>;
+                    hsync-active = <1>;
+                    vsync-active = <1>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                cru_csi_in: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&csi_cru_in>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
new file mode 100644
index 000000000000..c5c511c9f0db
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
+  (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
+  with the Image Processing module, which provides the video capture capabilities.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-csi2 # RZ/G2UL
+              - renesas,r9a07g044-csi2 # RZ/G2{L,LC}
+              - renesas,r9a07g054-csi2 # RZ/V2L
+          - const: renesas,rzg2l-csi2
+      - items:
+          - const: renesas,r9a09g047-csi2 # RZ/G3E
+          - const: renesas,r9a09g057-csi2
+      - const: renesas,r9a09g057-csi2 # RZ/V2H(P)
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+          - description: Internal clock for connecting CRU and MIPI
+          - description: CRU Main clock
+          - description: CRU Register access clock
+      - items:
+          - description: CRU Main clock
+          - description: CRU Register access clock
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: system
+          - const: video
+          - const: apb
+      - items:
+          - const: video
+          - const: apb
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CRU_PRESETN reset terminal
+      - description: D-PHY reset (CRU_CMN_RSTB or CRU_n_S_RESETN)
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: cmn-rstb
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node, Image Processing block connected to the CSI-2 receiver.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a09g057-csi2
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          maxItems: 2
+    else:
+      properties:
+        clocks:
+          minItems: 3
+        clock-names:
+          minItems: 3
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    csi: csi@10830400 {
+        compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
+        reg = <0x10830400 0xfc00>;
+        interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
+        clock-names = "system", "video", "apb";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_CRU_PRESETN>,
+                 <&cpg R9A07G044_CRU_CMN_RSTB>;
+        reset-names = "presetn", "cmn-rstb";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                csi2_in: endpoint {
+                    clock-lanes = <0>;
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&ov5645_ep>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                reg = <1>;
+
+                csi2cru: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&crucsi2>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
index c0442e79cbb4..cf54176f4fbd 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -52,7 +52,12 @@ properties:
               - renesas,vin-r8a77980 # R-Car V3H
               - renesas,vin-r8a77990 # R-Car E3
               - renesas,vin-r8a77995 # R-Car D3
+      - items:
+          - enum:
               - renesas,vin-r8a779a0 # R-Car V3U
+              - renesas,vin-r8a779g0 # R-Car V4H
+              - renesas,vin-r8a779h0 # R-Car V4M
+          - const: renesas,rcar-gen4-vin # Generic R-Car Gen4
 
   reg:
     maxItems: 1
@@ -69,7 +74,7 @@ properties:
   resets:
     maxItems: 1
 
-  #The per-board settings for Gen2 and RZ/G1 platforms:
+  # The per-board settings for Gen2 and RZ/G1 platforms:
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
     unevaluatedProperties: false
@@ -94,7 +99,7 @@ properties:
               synchronization is selected.
             default: 1
 
-          field-active-even: true
+          field-even-active: true
 
           bus-width: true
 
@@ -108,7 +113,7 @@ properties:
 
           data-active: true
 
-  #The per-board settings for Gen3 and RZ/G2 platforms:
+  # The per-board settings for Gen3 and RZ/G2 platforms:
   renesas,id:
     description: VIN channel number
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -143,7 +148,7 @@ properties:
                   synchronization is selected.
                 default: 1
 
-              field-active-even: true
+              field-even-active: true
 
               bus-width: true
 
@@ -302,11 +307,11 @@ examples:
 
                             vin0csi20: endpoint@0 {
                                     reg = <0>;
-                                    remote-endpoint= <&csi20vin0>;
+                                    remote-endpoint = <&csi20vin0>;
                             };
                             vin0csi40: endpoint@2 {
                                     reg = <2>;
-                                    remote-endpoint= <&csi40vin0>;
+                                    remote-endpoint = <&csi40vin0>;
                             };
                     };
             };
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
index 990e9c1dbc43..07a97dd87a5b 100644
--- a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
@@ -16,9 +16,18 @@ description:
 
 properties:
   compatible:
-    enum:
-      - renesas,vsp1 # R-Car Gen2 and RZ/G1
-      - renesas,vsp2 # R-Car Gen3 and RZ/G2
+    oneOf:
+      - enum:
+          - renesas,r9a07g044-vsp2 # RZ/G2L
+          - renesas,vsp1 # R-Car Gen2 and RZ/G1
+          - renesas,vsp2 # R-Car Gen3 and RZ/G2
+      - items:
+          - enum:
+              - renesas,r9a07g043u-vsp2   # RZ/G2UL
+              - renesas,r9a07g054-vsp2    # RZ/V2L
+              - renesas,r9a09g056-vsp2    # RZ/V2N
+              - renesas,r9a09g057-vsp2    # RZ/V2H(P)
+          - const: renesas,r9a07g044-vsp2 # RZ/G2L fallback
 
   reg:
     maxItems: 1
@@ -27,7 +36,17 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: Main clock
+      - description: Register access clock
+      - description: Video clock
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: pclk
+      - const: vclk
 
   power-domains:
     maxItems: 1
@@ -50,17 +69,35 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      items:
-        - const: renesas,vsp1
-then:
-  properties:
-    renesas,fcp: false
-else:
-  required:
-    - renesas,fcp
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,vsp1
+    then:
+      properties:
+        renesas,fcp: false
+    else:
+      required:
+        - renesas,fcp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g044-vsp2
+    then:
+      properties:
+        clocks:
+          minItems: 3
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
 
 examples:
   # R8A7790 (R-Car H2) VSP1-S
diff --git a/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml b/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml
new file mode 100644
index 000000000000..cc08ce94bef7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip,px30-vip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PX30 Video Input Processor (VIP)
+
+maintainers:
+  - Mehdi Djait <mehdi.djait@linux.intel.com>
+  - Michael Riesch <michael.riesch@collabora.com>
+
+description:
+  The Rockchip PX30 Video Input Processor (VIP) receives the data from a camera
+  sensor or CCIR656 encoder and transfers it into system main memory by AXI bus.
+
+properties:
+  compatible:
+    const: rockchip,px30-vip
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: ACLK
+      - description: HCLK
+      - description: PCLK
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: pclk
+
+  resets:
+    items:
+      - description: AXI
+      - description: AHB
+      - description: PCLK IN
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: pclkin
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: input port on the parallel interface
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-type:
+                enum:
+                  - 5 # MEDIA_BUS_TYPE_PARALLEL
+                  - 6 # MEDIA_BUS_TYPE_BT656
+
+            required:
+              - bus-type
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/media/video-interfaces.h>
+    #include <dt-bindings/power/px30-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        video-capture@ff490000 {
+            compatible = "rockchip,px30-vip";
+            reg = <0x0 0xff490000 0x0 0x200>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru ACLK_CIF>, <&cru HCLK_CIF>, <&cru PCLK_CIF>;
+            clock-names = "aclk", "hclk", "pclk";
+            power-domains = <&power PX30_PD_VI>;
+            resets = <&cru SRST_CIF_A>, <&cru SRST_CIF_H>, <&cru SRST_CIF_PCLKIN>;
+            reset-names = "axi", "ahb", "pclkin";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    cif_in: endpoint {
+                        remote-endpoint = <&tw9900_out>;
+                        bus-type = <MEDIA_BUS_TYPE_BT656>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml
new file mode 100644
index 000000000000..d246f5d38427
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip,rk3568-vepu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hantro G1 VPU encoders implemented on Rockchip SoCs
+
+maintainers:
+  - Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
+
+description:
+  Hantro G1 video encode-only accelerators present on Rockchip SoCs.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-vepu
+      - rockchip,rk3588-vepu121
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3568-power.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        vepu: video-codec@fdee0000 {
+            compatible = "rockchip,rk3568-vepu";
+            reg = <0x0 0xfdee0000 0x0 0x800>;
+            interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
+            clock-names = "aclk", "hclk";
+            iommus = <&vepu_mmu>;
+            power-domains = <&power RK3568_PD_RGA>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml
new file mode 100644
index 000000000000..18cd0a5a5318
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip,rk3568-vicap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3568 Video Capture (VICAP)
+
+maintainers:
+  - Michael Riesch <michael.riesch@collabora.com>
+
+description:
+  The Rockchip RK3568 Video Capture (VICAP) block features a digital video
+  port (DVP, a parallel video interface) and a MIPI CSI-2 port. It receives
+  the data from camera sensors, video decoders, or other companion ICs and
+  transfers it into system main memory by AXI bus.
+
+properties:
+  compatible:
+    const: rockchip,rk3568-vicap
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: ACLK
+      - description: HCLK
+      - description: DCLK
+      - description: ICLK
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: dclk
+      - const: iclk
+
+  iommus:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: ARST
+      - description: HRST
+      - description: DRST
+      - description: PRST
+      - description: IRST
+
+  reset-names:
+    items:
+      - const: arst
+      - const: hrst
+      - const: drst
+      - const: prst
+      - const: irst
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to general register file used for video input block control.
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: The digital video port (DVP, a parallel video interface).
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-type:
+                enum:
+                  - 5 # MEDIA_BUS_TYPE_PARALLEL
+                  - 6 # MEDIA_BUS_TYPE_BT656
+
+              rockchip,dvp-clk-delay:
+                $ref: /schemas/types.yaml#/definitions/uint32
+                default: 0
+                minimum: 0
+                maximum: 127
+                description:
+                  Delay the DVP path clock input to align the sampling phase,
+                  only valid in dual edge sampling mode. Delay is zero by
+                  default and can be adjusted optionally.
+
+            required:
+              - bus-type
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Port connected to the MIPI CSI-2 receiver output.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3568-power.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        vicap: video-capture@fdfe0000 {
+            compatible = "rockchip,rk3568-vicap";
+            reg = <0x0 0xfdfe0000 0x0 0x200>;
+            interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+            assigned-clocks = <&cru DCLK_VICAP>;
+            assigned-clock-rates = <300000000>;
+            clocks = <&cru ACLK_VICAP>, <&cru HCLK_VICAP>,
+                     <&cru DCLK_VICAP>, <&cru ICLK_VICAP_G>;
+            clock-names = "aclk", "hclk", "dclk", "iclk";
+            iommus = <&vicap_mmu>;
+            power-domains = <&power RK3568_PD_VI>;
+            resets = <&cru SRST_A_VICAP>, <&cru SRST_H_VICAP>,
+                     <&cru SRST_D_VICAP>, <&cru SRST_P_VICAP>,
+                     <&cru SRST_I_VICAP>;
+            reset-names = "arst", "hrst", "drst", "prst", "irst";
+            rockchip,grf = <&grf>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                vicap_dvp: port@0 {
+                    reg = <0>;
+
+                    vicap_dvp_input: endpoint {
+                        bus-type = <MEDIA_BUS_TYPE_BT656>;
+                        bus-width = <16>;
+                        pclk-sample = <MEDIA_PCLK_SAMPLE_DUAL_EDGE>;
+                        remote-endpoint = <&it6801_output>;
+                    };
+                };
+
+                vicap_mipi: port@1 {
+                    reg = <1>;
+
+                    vicap_mipi_input: endpoint {
+                        remote-endpoint = <&csi_output>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
index 089f11d21b25..809fda45b3bd 100644
--- a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
@@ -4,53 +4,95 @@
 $id: http://devicetree.org/schemas/media/rockchip,vdec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip Video Decoder (VDec) Device Tree Bindings
+title: Rockchip Video Decoder (VDec)
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
 
 description: |-
-  The Rockchip rk3399 has a stateless Video Decoder that can decodes H.264,
-  HEVC an VP9 streams.
+  Rockchip SoCs have variants of the same stateless Video Decoder that can
+  decodes H.264, HEVC, VP9 and AV1 streams, depending on the variant.
 
 properties:
   compatible:
     oneOf:
+      - const: rockchip,rk3288-vdec
       - const: rockchip,rk3399-vdec
+      - const: rockchip,rk3576-vdec
+      - const: rockchip,rk3588-vdec
       - items:
-          - const: rockchip,rk3228-vdec
+          - enum:
+              - rockchip,rk3228-vdec
+              - rockchip,rk3328-vdec
           - const: rockchip,rk3399-vdec
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: The function configuration registers base
+      - description: The link table configuration registers base
+      - description: The cache configuration registers base
+
+  reg-names:
+    items:
+      - const: function
+      - const: link
+      - const: cache
 
   interrupts:
     maxItems: 1
 
   clocks:
+    minItems: 4
     items:
       - description: The Video Decoder AXI interface clock
       - description: The Video Decoder AHB interface clock
       - description: The Video Decoded CABAC clock
       - description: The Video Decoder core clock
+      - description: The Video decoder HEVC CABAC clock
 
   clock-names:
+    minItems: 4
     items:
       - const: axi
       - const: ahb
       - const: cabac
       - const: core
+      - const: hevc_cabac
 
   assigned-clocks: true
 
   assigned-clock-rates: true
 
+  resets:
+    items:
+      - description: The Video Decoder AXI interface reset
+      - description: The Video Decoder AHB interface reset
+      - description: The Video Decoded CABAC reset
+      - description: The Video Decoder core reset
+      - description: The Video decoder HEVC CABAC reset
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: cabac
+      - const: core
+      - const: hevc_cabac
+
   power-domains:
     maxItems: 1
 
   iommus:
     maxItems: 1
 
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to a reserved on-chip SRAM regions.
+      Some SoCs, like rk3588 provide on-chip SRAM to store temporary
+      buffers during decoding.
+
 required:
   - compatible
   - reg
@@ -59,6 +101,41 @@ required:
   - clock-names
   - power-domains
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3576-vdec
+              - rockchip,rk3588-vdec
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+        clocks:
+          minItems: 5
+        clock-names:
+          minItems: 5
+        resets:
+          minItems: 5
+        reset-names:
+          minItems: 5
+    else:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names: false
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
+        resets: false
+        reset-names: false
+        sram: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index d1489b177331..477c21417e75 100644
--- a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -16,6 +16,7 @@ description: |
 properties:
   compatible:
     enum:
+      - fsl,imx8mp-isp
       - rockchip,px30-cif-isp
       - rockchip,rk3399-cif-isp
 
@@ -36,9 +37,9 @@ properties:
     minItems: 3
     items:
       # isp0 and isp1
-      - description: ISP clock
-      - description: ISP AXI clock
-      - description: ISP AHB clock
+      - description: ISP clock (for imx8mp, clk)
+      - description: ISP AXI clock (for imx8mp, m_hclk)
+      - description: ISP AHB clock (for imx8mp, hclk)
       # only for isp1
       - description: ISP Pixel clock
 
@@ -52,6 +53,13 @@ properties:
       # only for isp1
       - const: pclk
 
+  fsl,blk-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      A phandle to the media block control for the ISP, followed by a cell
+      containing the index of the gasket.
+
   iommus:
     maxItems: 1
 
@@ -63,7 +71,16 @@ properties:
     const: dphy
 
   power-domains:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: ISP power domain
+      - description: MIPI CSI-2 power domain
+
+  power-domain-names:
+    minItems: 1
+    items:
+      - const: isp
+      - const: csi2
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
@@ -84,8 +101,28 @@ properties:
                 minItems: 1
                 maxItems: 4
 
-    required:
-      - port@0
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: connection point for input on the parallel interface
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-type:
+                enum: [5, 6]
+
+            required:
+              - bus-type
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
 
 required:
   - compatible
@@ -93,9 +130,6 @@ required:
   - interrupts
   - clocks
   - clock-names
-  - iommus
-  - phys
-  - phy-names
   - power-domains
   - ports
 
@@ -123,6 +157,38 @@ allOf:
       required:
         - interrupt-names
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-isp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+        iommus: false
+        phys: false
+        phy-names: false
+        power-domains:
+          minItems: 2
+        power-domain-names:
+          minItems: 2
+      required:
+        - fsl,blk-ctrl
+        - power-domain-names
+    else:
+      properties:
+        fsl,blk-ctrl: false
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+      required:
+        - iommus
+        - phys
+        - phy-names
+
 additionalProperties: false
 
 examples:
@@ -180,6 +246,7 @@ examples:
             wcam: camera@36 {
                 compatible = "ovti,ov5695";
                 reg = <0x36>;
+                clocks = <&cru SCLK_TESTCLKOUT1>;
 
                 port {
                     wcam_out: endpoint {
@@ -193,12 +260,19 @@ examples:
                 compatible = "ovti,ov2685";
                 reg = <0x3c>;
 
-                  port {
-                      ucam_out: endpoint {
-                          remote-endpoint = <&mipi_in_ucam>;
-                          data-lanes = <1>;
-                      };
-                  };
+                clocks = <&cru SCLK_TESTCLKOUT1>;
+                clock-names = "xvclk";
+
+                avdd-supply = <&pp2800_cam>;
+                dovdd-supply = <&pp1800>;
+                dvdd-supply = <&pp1800>;
+
+                port {
+                    ucam_out: endpoint {
+                        remote-endpoint = <&mipi_in_ucam>;
+                        data-lanes = <1>;
+                    };
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.yaml b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
index dd645ddccb07..ac17cda65191 100644
--- a/Documentation/devicetree/bindings/media/rockchip-rga.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-rga.yaml
@@ -21,7 +21,10 @@ properties:
       - const: rockchip,rk3288-rga
       - const: rockchip,rk3399-rga
       - items:
-          - const: rockchip,rk3228-rga
+          - enum:
+              - rockchip,rk3228-rga
+              - rockchip,rk3568-rga
+              - rockchip,rk3588-rga
           - const: rockchip,rk3288-rga
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
index bacb60a34989..8c2501634080 100644
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@@ -1,9 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/rockchip-vpu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/rockchip-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Hantro G1 VPU codecs implemented on Rockchip SoCs
 
@@ -23,12 +22,19 @@ properties:
           - rockchip,rk3328-vpu
           - rockchip,rk3399-vpu
           - rockchip,px30-vpu
+          - rockchip,rk3568-vpu
+          - rockchip,rk3588-av1-vpu
       - items:
-          - const: rockchip,rk3188-vpu
+          - enum:
+              - rockchip,rk3128-vpu
+              - rockchip,rk3188-vpu
           - const: rockchip,rk3066-vpu
       - items:
           - const: rockchip,rk3228-vpu
           - const: rockchip,rk3399-vpu
+      - items:
+          - const: rockchip,rk3588-vpu121
+          - const: rockchip,rk3568-vpu
 
   reg:
     maxItems: 1
@@ -66,6 +72,13 @@ properties:
   iommus:
     maxItems: 1
 
+  resets:
+    items:
+      - description: AXI reset line
+      - description: AXI bus interface unit reset line
+      - description: APB reset line
+      - description: APB bus interface unit reset line
+
 required:
   - compatible
   - reg
@@ -78,18 +91,18 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/clock/rk3288-cru.h>
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/power/rk3288-power.h>
-
-        vpu: video-codec@ff9a0000 {
-                compatible = "rockchip,rk3288-vpu";
-                reg = <0xff9a0000 0x800>;
-                interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-                             <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-                interrupt-names = "vepu", "vdpu";
-                clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
-                clock-names = "aclk", "hclk";
-                power-domains = <&power RK3288_PD_VIDEO>;
-                iommus = <&vpu_mmu>;
-        };
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3288-power.h>
+
+    video-codec@ff9a0000 {
+        compatible = "rockchip,rk3288-vpu";
+        reg = <0xff9a0000 0x800>;
+        interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "vepu", "vdpu";
+        clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
+        clock-names = "aclk", "hclk";
+        power-domains = <&power RK3288_PD_VIDEO>;
+        iommus = <&vpu_mmu>;
+    };
diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt
deleted file mode 100644
index e847291d4aff..000000000000
--- a/Documentation/devicetree/bindings/media/s5p-cec.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Samsung HDMI CEC driver
-
-The HDMI CEC module is present is Samsung SoCs and its purpose is to
-handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
-  - compatible : value should be following
-	"samsung,s5p-cec"
-
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-
-  - interrupts : HDMI CEC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to HDMI CEC clock.
-  - clock-names : from common clock binding: must contain "hdmicec",
-		  corresponding to entry in the clocks property.
-  - samsung,syscon-phandle - phandle to the PMU system controller
-  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
-
-Optional:
-  - needs-hpd : if present the CEC support is only available when the HPD
-		is high. See cec.txt for more details.
-
-Example:
-
-hdmicec: cec@100b0000 {
-	compatible = "samsung,s5p-cec";
-	reg = <0x100B0000 0x200>;
-	interrupts = <0 114 0>;
-	clocks = <&clock CLK_HDMI_CEC>;
-	clock-names = "hdmicec";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-	hdmi-phandle = <&hdmi>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-};
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
deleted file mode 100644
index aa54c8159d9f..000000000000
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* Samsung Multi Format Codec (MFC)
-
-Multi Format Codec (MFC) is the IP present in Samsung SoCs which
-supports high resolution decoding and encoding functionalities.
-The MFC device driver is a v4l2 driver which can encode/decode
-video raw/elementary streams and has support for all popular
-video codecs.
-
-Required properties:
-  - compatible : value should be either one among the following
-	(a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs
-	(b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
-	(c) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
-	(d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
-	(e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
-	(f) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC
-
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-
-  - interrupts : MFC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to mfc clock.
-  - clock-names : from common clock binding: must contain "mfc",
-		  corresponding to entry in the clocks property.
-
-Optional properties:
-  - power-domains : power-domain property defined with a phandle
-			   to respective power domain.
-  - memory-region : from reserved memory binding: phandles to two reserved
-	memory regions, first is for "left" mfc memory bus interfaces,
-	second if for the "right" mfc memory bus, used when no SYSMMU
-	support is available; used only by MFC v5 present in Exynos4 SoCs
-
-Obsolete properties:
-  - samsung,mfc-r, samsung,mfc-l : support removed, please use memory-region
-	property instead
-
-
-Example:
-SoC specific DT entry:
-
-mfc: codec@13400000 {
-	compatible = "samsung,mfc-v5";
-	reg = <0x13400000 0x10000>;
-	interrupts = <0 94 0>;
-	power-domains = <&pd_mfc>;
-	clocks = <&clock 273>;
-	clock-names = "mfc";
-};
-
-Reserved memory specific DT entry for given board (see reserved memory binding
-for more information):
-
-reserved-memory {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	mfc_left: region@51000000 {
-		compatible = "shared-dma-pool";
-		no-map;
-		reg = <0x51000000 0x800000>;
-	};
-
-	mfc_right: region@43000000 {
-		compatible = "shared-dma-pool";
-		no-map;
-		reg = <0x43000000 0x800000>;
-	};
-};
-
-Board specific DT entry:
-
-codec@13400000 {
-	memory-region = <&mfc_left>, <&mfc_right>;
-};
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
new file mode 100644
index 000000000000..2ddca4167b0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4210-csis.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-csis
+      - samsung,exynos4210-csis
+      - samsung,exynos4212-csis
+      - samsung,exynos5250-csis
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 4]
+    description:
+      Number of data lines supported.
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: csis
+      - const: sclk_csis
+
+  clock-frequency:
+    default: 166000000
+    description:
+      The IP's main (system bus) clock frequency in Hz.
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: csis
+
+  power-domains:
+    maxItems: 1
+
+  vddio-supply:
+    description: MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V).
+
+  vddcore-supply:
+    description: MIPI CSIS Core voltage supply (e.g. 1.1V).
+
+patternProperties:
+  "^port@[34]$":
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Camera input port.
+
+    properties:
+      reg:
+        enum: [3, 4]
+
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 4
+
+          samsung,csis-hs-settle:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Differential receiver (HS-RX) settle time.
+
+          samsung,csis-wclk:
+            type: boolean
+            description:
+              CSI-2 wrapper clock selection. If this property is present external clock
+              from CMU will be used, or the bus clock if it's not specified.
+
+        required:
+          - data-lanes
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - bus-width
+  - clocks
+  - clock-names
+  - interrupts
+  - vddio-supply
+  - vddcore-supply
+
+anyOf:
+  - required:
+      - port@3
+  - required:
+      - port@4
+
+allOf:
+  - if:
+      required:
+        - samsung,isp-wb
+    then:
+      required:
+        - samsung,sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    csis@11890000 {
+        compatible = "samsung,exynos4210-csis";
+        reg = <0x11890000 0x4000>;
+        clocks = <&clock CLK_CSIS1>,
+                 <&clock CLK_SCLK_CSIS1>;
+        clock-names = "csis", "sclk_csis";
+        assigned-clocks = <&clock CLK_MOUT_CSIS1>,
+                          <&clock CLK_SCLK_CSIS1>;
+        assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+        assigned-clock-rates = <0>, <176000000>;
+
+        interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+
+        bus-width = <2>;
+        power-domains = <&pd_cam>;
+        phys = <&mipi_phy 2>;
+        phy-names = "csis";
+
+        vddcore-supply = <&ldo8_reg>;
+        vddio-supply = <&ldo10_reg>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Camera D (4) MIPI CSI-2 (CSIS1) */
+        port@4 {
+            reg = <4>;
+
+            endpoint {
+                remote-endpoint = <&is_s5k6a3_ep>;
+                data-lanes = <1>;
+                samsung,csis-hs-settle = <18>;
+                samsung,csis-wclk;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
new file mode 100644
index 000000000000..17ece4eb300c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4210-fimc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC Fully Integrated Mobile Camera
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  Each FIMC device should have an alias in the aliases node, in the form of
+  fimc<n>, where <n> is an integer specifying the IP block instance.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-fimc
+      - samsung,exynos4212-fimc
+      - samsung,s5pv210-fimc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: fimc
+      - const: sclk_fimc
+
+  clock-frequency:
+    description:
+      Maximum FIMC local clock (LCLK) frequency.
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  samsung,cam-if:
+    type: boolean
+    description:
+      The FIMC IP block includes the camera input interface.
+
+  samsung,isp-wb:
+    type: boolean
+    description: |
+      The FIMC IP block has the ISP writeback input.
+
+  samsung,lcd-wb:
+    type: boolean
+    description: |
+      The FIMC IP block has the LCD writeback input.
+
+  samsung,mainscaler-ext:
+    type: boolean
+    description:
+      FIMC IP supports extended image size and has CIEXTEN register.
+
+  samsung,min-pix-alignment:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: Minimum supported image height alignment.
+      - description: Horizontal image offset.
+    description:
+      The values are in pixels and default is <2 1>.
+
+  samsung,min-pix-sizes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    description: |
+      An array specifying minimum image size in pixels at the FIMC input and
+      output DMA, in the first and second cell respectively.  Default value
+      is <16 16>.
+
+  samsung,pix-limits:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 4
+    description: |
+      An array of maximum supported image sizes in pixels, for details refer to
+      Table 2-1 in the S5PV210 SoC User Manual. The meaning of each cell is as
+      follows:
+       0 - scaler input horizontal size
+       1 - input horizontal size for the scaler bypassed
+       2 - REAL_WIDTH without input rotation
+       3 - REAL_HEIGHT with input rotation
+
+  samsung,rotators:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x11
+    description: |
+      A bitmask specifying whether this IP has the input and the output
+      rotator. Bits 4 and 0 correspond to input and output rotator
+      respectively. If a rotator is present its corresponding bit should be
+      set.
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      System Registers (SYSREG) node.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - samsung,pix-limits
+
+allOf:
+  - if:
+      required:
+        - samsung,isp-wb
+    then:
+      required:
+        - samsung,sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    fimc@11800000 {
+        compatible = "samsung,exynos4212-fimc";
+        reg = <0x11800000 0x1000>;
+        clocks = <&clock CLK_FIMC0>,
+                 <&clock CLK_SCLK_FIMC0>;
+        clock-names = "fimc", "sclk_fimc";
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        iommus = <&sysmmu_fimc0>;
+        power-domains = <&pd_cam>;
+        samsung,sysreg = <&sys_reg>;
+
+        samsung,pix-limits = <4224 8192 1920 4224>;
+        samsung,mainscaler-ext;
+        samsung,isp-wb;
+        samsung,cam-if;
+
+        assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+                          <&clock CLK_SCLK_FIMC0>;
+        assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+        assigned-clock-rates = <0>, <176000000>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
new file mode 100644
index 000000000000..c8894358c46c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
@@ -0,0 +1,225 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-is.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  The FIMC-IS is a subsystem for processing image signal from an image sensor.
+  The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
+  processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
+  and SPI bus controllers, PWM and ADC.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4212-fimc-is
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  clocks:
+    maxItems: 21
+
+  clock-names:
+    items:
+      - const: lite0
+      - const: lite1
+      - const: ppmuispx
+      - const: ppmuispmx
+      - const: isp
+      - const: drc
+      - const: fd
+      - const: mcuisp
+      - const: gicisp
+      - const: mcuctl_isp
+      - const: pwm_isp
+      - const: ispdiv0
+      - const: ispdiv1
+      - const: mcuispdiv0
+      - const: mcuispdiv1
+      - const: mpll
+      - const: aclk200
+      - const: aclk400mcuisp
+      - const: div_aclk200
+      - const: div_aclk400mcuisp
+      - const: uart
+
+  interrupts:
+    maxItems: 2
+
+  iommus:
+    maxItems: 4
+
+  iommu-names:
+    items:
+      - const: isp
+      - const: drc
+      - const: fd
+      - const: mcuctl
+
+  power-domains:
+    maxItems: 1
+
+  samsung,pmu-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Power Management Unit (PMU) system controller interface, used to
+      power/start the ISP.
+
+patternProperties:
+  "^pmu@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    deprecated: true
+    description:
+      Node representing the SoC's Power Management Unit (duplicated with the
+      correct PMU node in the SoC). Deprecated, use samsung,pmu-syscon.
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+  "^i2c-isp@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+    description:
+      ISP I2C bus controller
+
+    properties:
+      compatible:
+        const: samsung,exynos4212-i2c-isp
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: i2c_isp
+
+      pinctrl-0: true
+      pinctrl-names:
+        items:
+          - const: default
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - interrupts
+  - ranges
+  - samsung,pmu-syscon
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    fimc-is@12000000 {
+        compatible = "samsung,exynos4212-fimc-is";
+        reg = <0x12000000 0x260000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+                 <&isp_clock CLK_ISP_FIMC_LITE1>,
+                 <&isp_clock CLK_ISP_PPMUISPX>,
+                 <&isp_clock CLK_ISP_PPMUISPMX>,
+                 <&isp_clock CLK_ISP_FIMC_ISP>,
+                 <&isp_clock CLK_ISP_FIMC_DRC>,
+                 <&isp_clock CLK_ISP_FIMC_FD>,
+                 <&isp_clock CLK_ISP_MCUISP>,
+                 <&isp_clock CLK_ISP_GICISP>,
+                 <&isp_clock CLK_ISP_MCUCTL_ISP>,
+                 <&isp_clock CLK_ISP_PWM_ISP>,
+                 <&isp_clock CLK_ISP_DIV_ISP0>,
+                 <&isp_clock CLK_ISP_DIV_ISP1>,
+                 <&isp_clock CLK_ISP_DIV_MCUISP0>,
+                 <&isp_clock CLK_ISP_DIV_MCUISP1>,
+                 <&clock CLK_MOUT_MPLL_USER_T>,
+                 <&clock CLK_ACLK200>,
+                 <&clock CLK_ACLK400_MCUISP>,
+                 <&clock CLK_DIV_ACLK200>,
+                 <&clock CLK_DIV_ACLK400_MCUISP>,
+                 <&clock CLK_UART_ISP_SCLK>;
+        clock-names = "lite0", "lite1", "ppmuispx",
+                      "ppmuispmx", "isp",
+                      "drc", "fd", "mcuisp",
+                      "gicisp", "mcuctl_isp", "pwm_isp",
+                      "ispdiv0", "ispdiv1", "mcuispdiv0",
+                      "mcuispdiv1", "mpll", "aclk200",
+                      "aclk400mcuisp", "div_aclk200",
+                      "div_aclk400mcuisp", "uart";
+        iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+                 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+        iommu-names = "isp", "drc", "fd", "mcuctl";
+        power-domains = <&pd_isp>;
+        samsung,pmu-syscon = <&pmu_system_controller>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        i2c-isp@12140000 {
+            compatible = "samsung,exynos4212-i2c-isp";
+            reg = <0x12140000 0x100>;
+            clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+            clock-names = "i2c_isp";
+            pinctrl-0 = <&fimc_is_i2c1>;
+            pinctrl-names = "default";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            image-sensor@10 {
+                compatible = "samsung,s5k6a3";
+                reg = <0x10>;
+                svdda-supply = <&cam_io_reg>;
+                svddio-supply = <&ldo19_reg>;
+                afvdd-supply = <&ldo19_reg>;
+                clocks = <&camera 1>;
+                clock-names = "extclk";
+                assigned-clocks = <&camera 1>;
+                assigned-clock-rates = <24000000>;
+                gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+
+                port {
+                    endpoint {
+                        remote-endpoint = <&csis1_ep>;
+                        data-lanes = <1>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
new file mode 100644
index 000000000000..bda724897293
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-lite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series camera host interface (FIMC-LITE)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  Each FIMC device should have an alias in the aliases node, in the form of
+  fimc-lite<n>, where <n> is an integer specifying the IP block instance.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4212-fimc-lite
+      - samsung,exynos5250-fimc-lite
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: flite
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    fimc-lite@12390000 {
+        compatible = "samsung,exynos4212-fimc-lite";
+        reg = <0x12390000 0x1000>;
+        clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+        clock-names = "flite";
+        interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_isp>;
+        iommus = <&sysmmu_fimc_lite0>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
new file mode 100644
index 000000000000..878397830a4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos5250-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC G-Scaler
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Seung-Woo Kim <sw0312.kim@samsung.com
+
+description:
+  G-Scaler is used for scaling and color space conversion on Samsung Exynos
+  SoCs.
+
+  Each G-Scaler node should have a numbered alias in the aliases node, in the
+  form of gscN, N = 0...3.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+          - const: samsung,exynos5-gsc
+      - enum:
+          - samsung,exynos5433-gsc
+      - const: samsung,exynos5-gsc
+        deprecated: True
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Syscon used to control the system registers to set writeback input and destination.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5-gsc
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: gscl
+    else:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+            - const: aclk_gsclbend
+            - const: gsd
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    video-scaler@13e00000 {
+        compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+        reg = <0x13e00000 0x1000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_gsc>;
+        clocks = <&clock CLK_GSCL0>;
+        clock-names = "gscl";
+        iommus = <&sysmmu_gsc0>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml
new file mode 100644
index 000000000000..1bfba84f8854
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml
@@ -0,0 +1,278 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,fimc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC Camera Subsystem (FIMC)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
+  represented by separate device tree nodes. Currently this includes: Fully
+  Integrated Mobile Camera (FIMC, in the S5P SoCs series known as CAMIF), MIPI
+  CSIS, FIMC-LITE and FIMC-IS (ISP).
+
+properties:
+  compatible:
+    const: samsung,fimc
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock specifier cell stores an index of a clock: 0, 1 for
+      CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: sclk_cam0
+      - const: sclk_cam1
+      - const: pxl_async0
+      - const: pxl_async1
+
+  clock-output-names:
+    maxItems: 2
+
+  parallel-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Active parallel video input ports.
+
+    patternProperties:
+      "^port@[01]$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Camera A and camera B inputs.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: idle
+      - const: active_a
+      - const: active_b
+
+patternProperties:
+  "^csis@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4210-csis.yaml#
+    description: MIPI CSI-2 receiver.
+
+  "^fimc@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4210-fimc.yaml#
+    description: Fully Integrated Mobile Camera.
+
+  "^fimc-is@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4212-fimc-is.yaml#
+    description: Imaging Subsystem (FIMC-IS).
+
+  "^fimc-lite@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4212-fimc-lite.yaml#
+    description: Camera host interface (FIMC-LITE).
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#clock-cells'
+  - clocks
+  - clock-names
+  - clock-output-names
+  - ranges
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    camera@11800000 {
+        compatible = "samsung,fimc";
+        #clock-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x0 0xba1000>;
+
+        clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+                 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+        clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+        clock-output-names = "cam_a_clkout", "cam_b_clkout";
+
+        assigned-clocks = <&clock CLK_MOUT_CAM0>,
+                          <&clock CLK_MOUT_CAM1>;
+        assigned-clock-parents = <&clock CLK_XUSBXTI>,
+                                 <&clock CLK_XUSBXTI>;
+
+        pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
+        pinctrl-names = "default";
+
+        fimc@0 {
+            compatible = "samsung,exynos4212-fimc";
+            reg = <0x00000000 0x1000>;
+            interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clock CLK_FIMC0>,
+                     <&clock CLK_SCLK_FIMC0>;
+            clock-names = "fimc", "sclk_fimc";
+            power-domains = <&pd_cam>;
+            samsung,sysreg = <&sys_reg>;
+            iommus = <&sysmmu_fimc0>;
+
+            samsung,pix-limits = <4224 8192 1920 4224>;
+            samsung,mainscaler-ext;
+            samsung,isp-wb;
+            samsung,cam-if;
+        };
+
+        /* ... FIMC 1-3 */
+
+        csis@80000 {
+            compatible = "samsung,exynos4210-csis";
+            reg = <0x00080000 0x4000>;
+            interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clock CLK_CSIS0>,
+                     <&clock CLK_SCLK_CSIS0>;
+            clock-names = "csis", "sclk_csis";
+            assigned-clocks = <&clock CLK_MOUT_CSIS0>,
+                              <&clock CLK_SCLK_CSIS0>;
+            assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+            assigned-clock-rates = <0>, <176000000>;
+
+            bus-width = <4>;
+            power-domains = <&pd_cam>;
+            phys = <&mipi_phy 0>;
+            phy-names = "csis";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            vddcore-supply = <&ldo8_reg>;
+            vddio-supply = <&ldo10_reg>;
+
+            /* Camera C (3) MIPI CSI-2 (CSIS0) */
+            port@3 {
+                reg = <3>;
+                endpoint {
+                    remote-endpoint = <&s5c73m3_ep>;
+                    data-lanes = <1 2 3 4>;
+                    samsung,csis-hs-settle = <12>;
+                };
+            };
+        };
+
+        /* ... CSIS 1 */
+
+        fimc-lite@b90000 {
+              compatible = "samsung,exynos4212-fimc-lite";
+              reg = <0xb90000 0x1000>;
+              interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+              power-domains = <&pd_isp>;
+              clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+              clock-names = "flite";
+              iommus = <&sysmmu_fimc_lite0>;
+        };
+
+        /* ... FIMC-LITE 1 */
+
+        fimc-is@800000 {
+            compatible = "samsung,exynos4212-fimc-is";
+            reg = <0x00800000 0x260000>;
+            interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+                     <&isp_clock CLK_ISP_FIMC_LITE1>,
+                     <&isp_clock CLK_ISP_PPMUISPX>,
+                     <&isp_clock CLK_ISP_PPMUISPMX>,
+                     <&isp_clock CLK_ISP_FIMC_ISP>,
+                     <&isp_clock CLK_ISP_FIMC_DRC>,
+                     <&isp_clock CLK_ISP_FIMC_FD>,
+                     <&isp_clock CLK_ISP_MCUISP>,
+                     <&isp_clock CLK_ISP_GICISP>,
+                     <&isp_clock CLK_ISP_MCUCTL_ISP>,
+                     <&isp_clock CLK_ISP_PWM_ISP>,
+                     <&isp_clock CLK_ISP_DIV_ISP0>,
+                     <&isp_clock CLK_ISP_DIV_ISP1>,
+                     <&isp_clock CLK_ISP_DIV_MCUISP0>,
+                     <&isp_clock CLK_ISP_DIV_MCUISP1>,
+                     <&clock CLK_MOUT_MPLL_USER_T>,
+                     <&clock CLK_ACLK200>,
+                     <&clock CLK_ACLK400_MCUISP>,
+                     <&clock CLK_DIV_ACLK200>,
+                     <&clock CLK_DIV_ACLK400_MCUISP>,
+                     <&clock CLK_UART_ISP_SCLK>;
+            clock-names = "lite0", "lite1", "ppmuispx",
+                          "ppmuispmx", "isp",
+                          "drc", "fd", "mcuisp",
+                          "gicisp", "mcuctl_isp", "pwm_isp",
+                          "ispdiv0", "ispdiv1", "mcuispdiv0",
+                          "mcuispdiv1", "mpll", "aclk200",
+                          "aclk400mcuisp", "div_aclk200",
+                          "div_aclk400mcuisp", "uart";
+            iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+                     <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+            iommu-names = "isp", "drc", "fd", "mcuctl";
+            power-domains = <&pd_isp>;
+            samsung,pmu-syscon = <&pmu_system_controller>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            i2c-isp@940000 {
+                compatible = "samsung,exynos4212-i2c-isp";
+                reg = <0x00940000 0x100>;
+                clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+                clock-names = "i2c_isp";
+                pinctrl-0 = <&fimc_is_i2c1>;
+                pinctrl-names = "default";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                image-sensor@10 {
+                    compatible = "samsung,s5k6a3";
+                    reg = <0x10>;
+                    svdda-supply = <&cam_io_reg>;
+                    svddio-supply = <&ldo19_reg>;
+                    afvdd-supply = <&ldo19_reg>;
+                    /* CAM_B_CLKOUT */
+                    clocks = <&camera 1>;
+                    clock-names = "extclk";
+                    assigned-clocks = <&camera 1>;
+                    assigned-clock-rates = <24000000>;
+                    gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+
+                    port {
+                        endpoint {
+                            remote-endpoint = <&csis1_ep>;
+                            data-lanes = <1>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml
new file mode 100644
index 000000000000..1af5d7ac382c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5c73m3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5C73M3 8Mp camera ISP
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656)
+  video data busses. The I2C bus is the main control bus and additionally the
+  SPI bus is used, mostly for transferring the firmware to and from the
+  device. Two slave device nodes corresponding to these control bus
+  interfaces are required and should be placed under respective bus
+  controller nodes.
+
+properties:
+  compatible:
+    const: samsung,s5c73m3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cis_extclk
+
+  clock-frequency:
+    default: 24000000
+    description: cis_extclk clock frequency.
+
+  standby-gpios:
+    maxItems: 1
+    description: STANDBY pin.
+
+  vdda-supply:
+    description: Analog power supply (1.2V).
+
+  vdd-af-supply:
+    description: lens power supply (2.8V).
+
+  vddio-cis-supply:
+    description: CIS I/O power supply (1.2V to 1.8V).
+
+  vddio-host-supply:
+    description: Host I/O power supply (1.8V to 2.8V).
+
+  vdd-int-supply:
+    description: Digital power supply (1.2V).
+
+  vdd-reg-supply:
+    description: Regulator input power supply (2.8V).
+
+  xshutdown-gpios:
+    maxItems: 1
+    description: XSHUTDOWN pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      required:
+        - spi-max-frequency
+    then:
+      properties:
+        # The SPI node is simplified firmware-transfer interface only
+        clocks: false
+        clock-names: false
+        standby-gpios: false
+        vdda-supply: false
+        vdd-af-supply: false
+        vddio-cis-supply: false
+        vddio-host-supply: false
+        vdd-int-supply: false
+        vdd-reg-supply: false
+        xshutdown-gpios: false
+        port: false
+    else:
+      required:
+        - clocks
+        - clock-names
+        - standby-gpios
+        - vdda-supply
+        - vdd-af-supply
+        - vddio-cis-supply
+        - vddio-host-supply
+        - vdd-int-supply
+        - vdd-reg-supply
+        - xshutdown-gpios
+        - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        image-sensor@3c {
+            compatible = "samsung,s5c73m3";
+            reg = <0x3c>;
+            clock-frequency = <24000000>;
+            clocks = <&camera 0>;
+            clock-names = "cis_extclk";
+            standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>;
+            vdda-supply = <&cam_vdda_reg>;
+            vdd-af-supply = <&cam_af_reg>;
+            vddio-cis-supply = <&ldo9_reg>;
+            vddio-host-supply = <&ldo18_reg>;
+            vdd-int-supply = <&buck9_reg>;
+            vdd-reg-supply = <&cam_io_reg>;
+            xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
+
+            port {
+                s5c73m3_ep: endpoint {
+                    remote-endpoint = <&csis0_ep>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+        };
+    };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        image-sensor@0 {
+            compatible = "samsung,s5c73m3";
+            reg = <0>;
+            spi-max-frequency = <50000000>;
+            controller-data {
+                samsung,spi-feedback-delay = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
new file mode 100644
index 000000000000..b46cc780703c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5p-mfc.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5p-mfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Multi Format Codec (MFC)
+
+maintainers:
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+  - Aakarsh Jain <aakarsh.jain@samsung.com>
+
+description:
+  Multi Format Codec (MFC) is the IP present in Samsung SoCs which
+  supports high resolution decoding and encoding functionalities.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5433-mfc        # Exynos5433
+          - samsung,mfc-v5                # Exynos4
+          - samsung,mfc-v6                # Exynos5
+          - samsung,mfc-v7                # Exynos5420
+          - samsung,mfc-v8                # Exynos5800
+          - samsung,mfc-v10               # Exynos7880
+          - tesla,fsd-mfc                 # Tesla FSD
+      - items:
+          - enum:
+              - samsung,exynos3250-mfc    # Exynos3250
+          - const: samsung,mfc-v7         # Fall back for Exynos3250
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  iommu-names:
+    minItems: 1
+    items:
+      - const: left
+      - const: right
+
+  power-domains:
+    maxItems: 1
+
+  memory-region:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-mfc
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: mfc
+            - const: sclk_mfc
+        iommus:
+          maxItems: 1
+        iommu-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-mfc
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+        iommus:
+          minItems: 2
+        iommu-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,mfc-v5
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: mfc
+            - const: sclk_mfc
+        iommus:
+          minItems: 2
+        iommu-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,mfc-v6
+              - samsung,mfc-v8
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: mfc
+        iommus:
+          minItems: 2
+        iommu-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,mfc-v7
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - tesla,fsd-mfc
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: mfc
+        iommus:
+          maxItems: 2
+        iommus-names: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/clock/exynos-audss-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    codec@13400000 {
+        compatible = "samsung,mfc-v5";
+        reg = <0x13400000 0x10000>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_mfc>;
+        clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
+        clock-names = "mfc", "sclk_mfc";
+        iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+        iommu-names = "left", "right";
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
new file mode 100644
index 000000000000..5c969e764d4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5pv210-jpeg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 and Exynos SoC JPEG codec
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-jpeg
+      - samsung,exynos3250-jpeg
+      - samsung,exynos4210-jpeg
+      - samsung,exynos4212-jpeg
+      - samsung,exynos5420-jpeg
+      - samsung,exynos5433-jpeg
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-jpeg
+              - samsung,exynos4210-jpeg
+              - samsung,exynos4212-jpeg
+              - samsung,exynos5420-jpeg
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-jpeg
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: jpeg
+            - const: sclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-jpeg
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+            - const: sclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    codec@15020000 {
+        compatible = "samsung,exynos5433-jpeg";
+        reg = <0x15020000 0x10000>;
+        interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "pclk", "aclk", "aclk_xiu", "sclk";
+        clocks = <&cmu_mscl CLK_PCLK_JPEG>,
+                 <&cmu_mscl CLK_ACLK_JPEG>,
+                 <&cmu_mscl CLK_ACLK_XIU_MSCLX>,
+                 <&cmu_mscl CLK_SCLK_JPEG>;
+        iommus = <&sysmmu_jpeg>;
+        power-domains = <&pd_mscl>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
deleted file mode 100644
index 20447529c985..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ /dev/null
@@ -1,209 +0,0 @@
-Samsung S5P/Exynos SoC Camera Subsystem (FIMC)
-----------------------------------------------
-
-The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
-represented by separate device tree nodes. Currently this includes: FIMC (in
-the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP).
-
-The sub-subdevices are defined as child nodes of the common 'camera' node which
-also includes common properties of the whole subsystem not really specific to
-any single sub-device, like common camera port pins or the CAMCLK clock outputs
-for external image sensors attached to an SoC.
-
-Common 'camera' node
---------------------
-
-Required properties:
-
-- compatible: must be "samsung,fimc", "simple-bus"
-- clocks: list of clock specifiers, corresponding to entries in
-  the clock-names property;
-- clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
-  "pxl_async1" entries, matching entries in the clocks property.
-
-- #clock-cells: from the common clock bindings (../clock/clock-bindings.txt),
-  must be 1. A clock provider is associated with the 'camera' node and it should
-  be referenced by external sensors that use clocks provided by the SoC on
-  CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock.
-  The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
-
-- clock-output-names: from the common clock bindings, should contain names of
-  clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT,
-  CAM_B_CLKOUT output clocks respectively.
-
-The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
-to define a required pinctrl state named "default" and optional pinctrl states:
-"idle", "active-a", active-b". These optional states can be used to switch the
-camera port pinmux at runtime. The "idle" state should configure both the camera
-ports A and B into high impedance state, especially the CAMCLK clock output
-should be inactive. For the "active-a" state the camera port A must be activated
-and the port B deactivated and for the state "active-b" it should be the other
-way around.
-
-The 'camera' node must include at least one 'fimc' child node.
-
-
-'fimc' device nodes
--------------------
-
-Required properties:
-
-- compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc"
-  for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs;
-- reg: physical base address and length of the registers set for the device;
-- interrupts: should contain FIMC interrupt;
-- clocks: list of clock specifiers, must contain an entry for each required
-  entry in clock-names;
-- clock-names: must contain "fimc", "sclk_fimc" entries.
-- samsung,pix-limits: an array of maximum supported image sizes in pixels, for
-  details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of
-  each cell is as follows:
-  0 - scaler input horizontal size,
-  1 - input horizontal size for the scaler bypassed,
-  2 - REAL_WIDTH without input rotation,
-  3 - REAL_HEIGHT with input rotation,
-- samsung,sysreg: a phandle to the SYSREG node.
-
-Each FIMC device should have an alias in the aliases node, in the form of
-fimc<n>, where <n> is an integer specifying the IP block instance.
-
-Optional properties:
-
-- clock-frequency: maximum FIMC local clock (LCLK) frequency;
-- samsung,min-pix-sizes: an array specyfing minimum image size in pixels at
-  the FIMC input and output DMA, in the first and second cell respectively.
-  Default value when this property is not present is <16 16>;
-- samsung,min-pix-alignment: minimum supported image height alignment (first
-  cell) and the horizontal image offset (second cell). The values are in pixels
-  and default to <2 1> when this property is not present;
-- samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP
-  supports extended image size and has CIEXTEN register;
-- samsung,rotators: a bitmask specifying whether this IP has the input and
-  the output rotator. Bits 4 and 0 correspond to input and output rotator
-  respectively. If a rotator is present its corresponding bit should be set.
-  Default value when this property is not specified is 0x11.
-- samsung,cam-if: a bolean property indicating whether the IP block includes
-  the camera input interface.
-- samsung,isp-wb: this property must be present if the IP block has the ISP
-  writeback input.
-- samsung,lcd-wb: this property must be present if the IP block has the LCD
-  writeback input.
-
-
-'parallel-ports' node
----------------------
-
-This node should contain child 'port' nodes specifying active parallel video
-input ports. It includes camera A and camera B inputs. 'reg' property in the
-port nodes specifies data input - 1, 2 indicates input A, B respectively.
-
-Optional properties
-
-- samsung,camclk-out (deprecated) : specifies clock output for remote sensor,
-  0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
-
-Image sensor nodes
-------------------
-
-The sensor device nodes should be added to their control bus controller (e.g.
-I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
-using the common video interfaces bindings, defined in video-interfaces.txt.
-
-Example:
-
-	aliases {
-		fimc0 = &fimc_0;
-	};
-
-	/* Parallel bus IF sensor */
-	i2c_0: i2c@13860000 {
-		s5k6aa: sensor@3c {
-			compatible = "samsung,s5k6aafx";
-			reg = <0x3c>;
-			vddio-supply = <...>;
-
-			clock-frequency = <24000000>;
-			clocks = <&camera 1>;
-			clock-names = "mclk";
-
-			port {
-				s5k6aa_ep: endpoint {
-					remote-endpoint = <&fimc0_ep>;
-					bus-width = <8>;
-					hsync-active = <0>;
-					vsync-active = <1>;
-					pclk-sample = <1>;
-				};
-			};
-		};
-
-		/* MIPI CSI-2 bus IF sensor */
-		s5c73m3: sensor@1a {
-			compatible = "samsung,s5c73m3";
-			reg = <0x1a>;
-			vddio-supply = <...>;
-
-			clock-frequency = <24000000>;
-			clocks = <&camera 0>;
-			clock-names = "mclk";
-
-			port {
-				s5c73m3_1: endpoint {
-					data-lanes = <1 2 3 4>;
-					remote-endpoint = <&csis0_ep>;
-				};
-			};
-		};
-	};
-
-	camera {
-		compatible = "samsung,fimc", "simple-bus";
-		clocks = <&clock 132>, <&clock 133>, <&clock 351>,
-			 <&clock 352>;
-		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0",
-			      "pxl_async1";
-		#clock-cells = <1>;
-		clock-output-names = "cam_a_clkout", "cam_b_clkout";
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam_port_a_clk_active>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* parallel camera ports */
-		parallel-ports {
-			/* camera A input */
-			port@1 {
-				reg = <1>;
-				fimc0_ep: endpoint {
-					remote-endpoint = <&s5k6aa_ep>;
-					bus-width = <8>;
-					hsync-active = <0>;
-					vsync-active = <1>;
-					pclk-sample = <1>;
-				};
-			};
-		};
-
-		fimc_0: fimc@11800000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11800000 0x1000>;
-			interrupts = <0 85 0>;
-		};
-
-		csis_0: csis@11880000 {
-			compatible = "samsung,exynos4210-csis";
-			reg = <0x11880000 0x1000>;
-			interrupts = <0 78 0>;
-			/* camera C input */
-			port@3 {
-				reg = <3>;
-				csis0_ep: endpoint {
-					remote-endpoint = <&s5c73m3_ep>;
-					data-lanes = <1 2 3 4>;
-					samsung,csis-hs-settle = <12>;
-				};
-			};
-		};
-	};
-
-The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt.
diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
deleted file mode 100644
index a4149c9434ea..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS)
--------------------------------------------------------------
-
-Required properties:
-
-- compatible	  : "samsung,s5pv210-csis" for S5PV210 (S5PC110),
-		    "samsung,exynos4210-csis" for Exynos4210 (S5PC210),
-		    "samsung,exynos4212-csis" for Exynos4212/Exynos4412,
-		    "samsung,exynos5250-csis" for Exynos5250;
-- reg		  : offset and length of the register set for the device;
-- interrupts      : should contain MIPI CSIS interrupt; the format of the
-		    interrupt specifier depends on the interrupt controller;
-- bus-width	  : maximum number of data lanes supported (SoC specific);
-- vddio-supply    : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V);
-- vddcore-supply  : MIPI CSIS Core voltage supply (e.g. 1.1V);
-- clocks	  : list of clock specifiers, corresponding to entries in
-		    clock-names property;
-- clock-names	  : must contain "csis", "sclk_csis" entries, matching entries
-		    in the clocks property.
-
-Optional properties:
-
-- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
-		    value when this property is not specified is 166 MHz;
-- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present
-		    external clock from CMU will be used, or the bus clock if
-		    if it's not specified.
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-media/video-interfaces.txt. The following are properties specific to those nodes.
-
-port node
----------
-
-- reg		  : (required) must be 3 for camera C input (CSIS0) or 4 for
-		    camera D input (CSIS1);
-
-endpoint node
--------------
-
-- data-lanes	  : (required) an array specifying active physical MIPI-CSI2
-		    data input lanes and their mapping to logical lanes; the
-		    array's content is unused, only its length is meaningful;
-
-- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time;
-
-
-Example:
-
-	reg0: regulator@0 {
-	};
-
-	reg1: regulator@1 {
-	};
-
-/* SoC properties */
-
-	csis_0: csis@11880000 {
-		compatible = "samsung,exynos4210-csis";
-		reg = <0x11880000 0x1000>;
-		interrupts = <0 78 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-/* Board properties */
-
-	csis_0: csis@11880000 {
-		clock-frequency = <166000000>;
-		vddio-supply = <&reg0>;
-		vddcore-supply = <&reg1>;
-		port {
-			reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */
-			csis0_ep: endpoint {
-				remote-endpoint = <...>;
-				data-lanes = <1>, <2>;
-				samsung,csis-hs-settle = <12>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
deleted file mode 100644
index 21f31fdf5543..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-Samsung S5C73M3 8Mp camera ISP
-------------------------------
-
-The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video
-data busses. The I2C bus is the main control bus and additionally the SPI bus
-is used, mostly for transferring the firmware to and from the device. Two
-slave device nodes corresponding to these control bus interfaces are required
-and should be placed under respective bus controller nodes.
-
-I2C slave device node
----------------------
-
-Required properties:
-
-- compatible	    : "samsung,s5c73m3";
-- reg		    : I2C slave address of the sensor;
-- vdd-int-supply    : digital power supply (1.2V);
-- vdda-supply	    : analog power supply (1.2V);
-- vdd-reg-supply    : regulator input power supply (2.8V);
-- vddio-host-supply : host I/O power supply (1.8V to 2.8V);
-- vddio-cis-supply  : CIS I/O power supply (1.2V to 1.8V);
-- vdd-af-supply     : lens power supply (2.8V);
-- xshutdown-gpios   : specifier of GPIO connected to the XSHUTDOWN pin;
-- standby-gpios     : specifier of GPIO connected to the STANDBY pin;
-- clocks	    : should contain list of phandle and clock specifier pairs
-		      according to common clock bindings for the clocks described
-		      in the clock-names property;
-- clock-names	    : should contain "cis_extclk" entry for the CIS_EXTCLK clock;
-
-Optional properties:
-
-- clock-frequency   : the frequency at which the "cis_extclk" clock should be
-		      configured to operate, in Hz; if this property is not
-		      specified default 24 MHz value will be used.
-
-The common video interfaces bindings (see video-interfaces.txt) should be used
-to specify link from the S5C73M3 to an external image data receiver. The S5C73M3
-device node should contain one 'port' child node with an 'endpoint' subnode for
-this purpose. The data link from a raw image sensor to the S5C73M3 can be
-similarly specified, but it is optional since the S5C73M3 ISP and a raw image
-sensor are usually inseparable and form a hybrid module.
-
-Following properties are valid for the endpoint node(s):
-
-endpoint subnode
-----------------
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
-  video-interfaces.txt. This sensor doesn't support data lane remapping
-  and physical lane indexes in subsequent elements of the array should
-  be only consecutive ascending values.
-
-SPI device node
----------------
-
-Required properties:
-
-- compatible	    : "samsung,s5c73m3";
-
-For more details see description of the SPI busses bindings
-(../spi/spi-bus.txt) and bindings of a specific bus controller.
-
-Example:
-
-i2c@138a000000 {
-	...
-	s5c73m3@3c {
-		compatible = "samsung,s5c73m3";
-		reg = <0x3c>;
-		vdd-int-supply = <&buck9_reg>;
-		vdda-supply = <&ldo17_reg>;
-		vdd-reg-supply = <&cam_io_reg>;
-		vddio-host-supply = <&ldo18_reg>;
-		vddio-cis-supply = <&ldo9_reg>;
-		vdd-af-supply = <&cam_af_reg>;
-		clock-frequency = <24000000>;
-		clocks = <&clk 0>;
-		clock-names = "cis_extclk";
-		reset-gpios = <&gpf1 3 1>;
-		standby-gpios = <&gpm0 1 1>;
-		port {
-			s5c73m3_ep: endpoint {
-				remote-endpoint = <&csis0_ep>;
-				data-lanes = <1 2 3 4>;
-			};
-		};
-	};
-};
-
-spi@1392000 {
-	...
-	s5c73m3_spi: s5c73m3@0 {
-		compatible = "samsung,s5c73m3";
-		reg = <0>;
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
deleted file mode 100644
index 1f51e0439c96..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
---------------------------------------------------------------------
-
-Required properties:
-
-- compatible	  : "samsung,s5k5baf";
-- reg		  : I2C slave address of the sensor;
-- vdda-supply	  : analog power supply 2.8V (2.6V to 3.0V);
-- vddreg-supply	  : regulator input power supply 1.8V (1.7V to 1.9V)
-		    or 2.8V (2.6V to 3.0);
-- vddio-supply	  : I/O power supply 1.8V (1.65V to 1.95V)
-		    or 2.8V (2.5V to 3.1V);
-- stbyn-gpios	  : GPIO connected to STDBYN pin;
-- rstn-gpios	  : GPIO connected to RSTN pin;
-- clocks	  : list of phandle and clock specifier pairs
-		    according to common clock bindings for the
-		    clocks described in clock-names;
-- clock-names	  : should include "mclk" for the sensor's master clock;
-
-Optional properties:
-
-- clock-frequency : the frequency at which the "mclk" clock should be
-		    configured to operate, in Hz; if this property is not
-		    specified default 24 MHz value will be used.
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-media/video-interfaces.txt. The following are properties specific to those
-nodes.
-
-endpoint node
--------------
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
-	       video-interfaces.txt. If present it should be <1> - the device
-	       supports only one data lane without re-mapping.
-
-Example:
-
-s5k5bafx@2d {
-	compatible = "samsung,s5k5baf";
-	reg = <0x2d>;
-	vdda-supply = <&cam_io_en_reg>;
-	vddreg-supply = <&vt_core_15v_reg>;
-	vddio-supply = <&vtcam_reg>;
-	stbyn-gpios = <&gpl2 0 1>;
-	rstn-gpios = <&gpl2 1 1>;
-	clock-names = "mclk";
-	clocks = <&clock_cam 0>;
-	clock-frequency = <24000000>;
-
-	port {
-		s5k5bafx_ep: endpoint {
-			remote-endpoint = <&csis1_ep>;
-			data-lanes = <1>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
deleted file mode 100644
index cce01e82f3e3..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Samsung S5K6A3(YX) raw image sensor
----------------------------------
-
-S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
-and CCI (I2C compatible) control bus.
-
-Required properties:
-
-- compatible	: "samsung,s5k6a3";
-- reg		: I2C slave address of the sensor;
-- svdda-supply	: core voltage supply;
-- svddio-supply	: I/O voltage supply;
-- afvdd-supply	: AF (actuator) voltage supply;
-- gpios		: specifier of a GPIO connected to the RESET pin;
-- clocks	: should contain list of phandle and clock specifier pairs
-		  according to common clock bindings for the clocks described
-		  in the clock-names property;
-- clock-names	: should contain "extclk" entry for the sensor's EXTCLK clock;
-
-Optional properties:
-
-- clock-frequency : the frequency at which the "extclk" clock should be
-		    configured to operate, in Hz; if this property is not
-		    specified default 24 MHz value will be used.
-
-The common video interfaces bindings (see video-interfaces.txt) should be
-used to specify link to the image data receiver. The S5K6A3(YX) device
-node should contain one 'port' child node with an 'endpoint' subnode.
-
-Following properties are valid for the endpoint node:
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
-  video-interfaces.txt.  The sensor supports only one data lane.
diff --git a/Documentation/devicetree/bindings/media/si470x.txt b/Documentation/devicetree/bindings/media/si470x.txt
deleted file mode 100644
index a9403558362e..000000000000
--- a/Documentation/devicetree/bindings/media/si470x.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Silicon Labs FM Radio receiver
-
-The Silicon Labs Si470x is family of FM radio receivers with receive power scan
-supporting 76-108 MHz, programmable through an I2C interface.
-Some of them includes an RDS encoder.
-
-Required Properties:
-- compatible: Should contain "silabs,si470x"
-- reg: the I2C address of the device
-
-Optional Properties:
-- interrupts : The interrupt number
-- reset-gpios: GPIO specifier for the chips reset line
-
-Example:
-
-&i2c2 {
-        si470x@63 {
-                compatible = "silabs,si470x";
-                reg = <0x63>;
-
-                interrupt-parent = <&gpj2>;
-                interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-                reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
-        };
-};
diff --git a/Documentation/devicetree/bindings/media/silabs,si470x.yaml b/Documentation/devicetree/bindings/media/silabs,si470x.yaml
new file mode 100644
index 000000000000..db22b88fc5bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/silabs,si470x.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/silabs,si470x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs Si470x FM Radio Receiver
+
+maintainers:
+  - Hans Verkuil <hverkuil@kernel.org>
+  - Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
+
+properties:
+  compatible:
+    const: silabs,si470x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fmradio@10 {
+            compatible = "silabs,si470x";
+            reg = <0x10>;
+            interrupt-parent = <&gpj2>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+            reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
new file mode 100644
index 000000000000..b7f6c87d0e06
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Device Tree bindings for Synopsys DesignWare HDMI RX Controller
+
+---
+$id: http://devicetree.org/schemas/media/snps,dw-hdmi-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare HDMI RX Controller
+
+maintainers:
+  - Dmitry Osipenko <dmitry.osipenko@collabora.com>
+
+description:
+  Synopsys DesignWare HDMI Input Controller preset on RK3588 SoCs
+  allowing devices to receive and decode high-resolution video streams
+  from external sources like media players, cameras, laptops, etc.
+
+properties:
+  compatible:
+    items:
+      - const: rockchip,rk3588-hdmirx-ctrler
+      - const: snps,dw-hdmi-rx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: cec
+      - const: hdmi
+      - const: dma
+
+  clocks:
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: audio
+      - const: cr_para
+      - const: pclk
+      - const: ref
+      - const: hclk_s_hdmirx
+      - const: hclk_vo1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 4
+
+  reset-names:
+    items:
+      - const: axi
+      - const: apb
+      - const: ref
+      - const: biu
+
+  memory-region:
+    maxItems: 1
+
+  hpd-gpios:
+    description: GPIO specifier for HPD.
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the general register file
+      containing HDMIRX PHY status bits.
+
+  rockchip,vo1-grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the Video Output GRF register
+      to enable EDID transfer through SDAIN and SCLIN.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - pinctrl-0
+  - hpd-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rockchip,rk3588-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/rk3588-power.h>
+    #include <dt-bindings/reset/rockchip,rk3588-cru.h>
+    hdmi_receiver: hdmi-receiver@fdee0000 {
+      compatible = "rockchip,rk3588-hdmirx-ctrler", "snps,dw-hdmi-rx";
+      reg = <0xfdee0000 0x6000>;
+      interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>,
+                   <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>,
+                   <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+      interrupt-names = "cec", "hdmi", "dma";
+      clocks = <&cru ACLK_HDMIRX>,
+               <&cru CLK_HDMIRX_AUD>,
+               <&cru CLK_CR_PARA>,
+               <&cru PCLK_HDMIRX>,
+               <&cru CLK_HDMIRX_REF>,
+               <&cru PCLK_S_HDMIRX>,
+               <&cru HCLK_VO1>;
+      clock-names = "aclk",
+                    "audio",
+                    "cr_para",
+                    "pclk",
+                    "ref",
+                    "hclk_s_hdmirx",
+                    "hclk_vo1";
+      power-domains = <&power RK3588_PD_VO1>;
+      resets = <&cru SRST_A_HDMIRX>, <&cru SRST_P_HDMIRX>,
+               <&cru SRST_HDMIRX_REF>, <&cru SRST_A_HDMIRX_BIU>;
+      reset-names = "axi", "apb", "ref", "biu";
+      memory-region = <&hdmi_receiver_cma>;
+      pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_5v_detection>;
+      pinctrl-names = "default";
+      hpd-gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
index 9c1262a276b5..34147127192f 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/st,stm32-dcmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI) binding
+title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI)
 
 maintainers:
   - Hugues Fruchet <hugues.fruchet@foss.st.com>
@@ -36,6 +36,10 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
     unevaluatedProperties: false
@@ -90,7 +94,9 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/media/video-interfaces.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
+
     dcmi: dcmi@4c006000 {
         compatible = "st,stm32-dcmi";
         reg = <0x4c006000 0x400>;
@@ -104,7 +110,7 @@ examples:
         port {
              dcmi_0: endpoint {
                    remote-endpoint = <&ov5640_0>;
-                   bus-type = <5>;
+                   bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                    bus-width = <8>;
                    hsync-active = <0>;
                    vsync-active = <0>;
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
new file mode 100644
index 000000000000..7b03a77adbce
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmipp.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dcmipp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DCMIPP Digital Camera Memory Interface Pixel Processor
+
+maintainers:
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp13-dcmipp
+      - st,stm32mp25-dcmipp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: bus clock
+      - description: csi clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: kclk
+      - const: mclk
+    minItems: 1
+
+  resets:
+    maxItems: 1
+
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      DCMIPP supports a single port node with parallel bus.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum: [4, 5, 6]
+            default: 5
+
+          bus-width:
+            enum: [8, 10, 12, 14]
+            default: 8
+
+          pclk-sample: true
+          hsync-active: true
+          vsync-active: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - port
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp13-dcmipp
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+        port:
+          properties:
+            endpoint:
+              properties:
+                bus-type:
+                  enum: [5, 6]
+    else:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp13-clks.h>
+    #include <dt-bindings/reset/stm32mp13-resets.h>
+    dcmipp@5a000000 {
+        compatible = "st,stm32mp13-dcmipp";
+        reg = <0x5a000000 0x400>;
+        interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&rcc DCMIPP_R>;
+        clocks = <&rcc DCMIPP_K>;
+
+        port {
+             endpoint {
+                   remote-endpoint = <&mipid02_2>;
+                   bus-width = <8>;
+                   hsync-active = <0>;
+                   vsync-active = <0>;
+                   pclk-sample = <0>;
+             };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
new file mode 100644
index 000000000000..b9f7d84f38c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dma2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Chrom-Art Accelerator DMA2D
+
+description:
+  Chrom-ART Accelerator(DMA2D), graphical hardware accelerator
+  enabling enhanced graphical user interface with minimum CPU load
+
+  It can perform the following operations.
+
+  - Filling a part or the whole of a destination image with a specific color.
+  - Copying a part or the whole of a source image into a part or the whole of
+    a destination image.
+  - Copying a part or the whole of a source image into a part or the whole of
+    a destination image with a pixel format conversion.
+  - Blending a part and/or two complete source images with different pixel
+    format and copy the result into a part or the whole of a destination image
+    with a different color format. (TODO)
+
+maintainers:
+  - Dillon Min <dillon.minfei@gmail.com>
+
+properties:
+  compatible:
+    const: st,stm32-dma2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dma2d
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    #include <dt-bindings/mfd/stm32f4-rcc.h>
+    dma2d: dma2d@4002b000 {
+        compatible = "st,stm32-dma2d";
+        reg = <0x4002b000 0xc00>;
+        interrupts = <90>;
+        resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>;
+        clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>;
+        clock-names = "dma2d";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/st,stm32mp25-csi.yaml b/Documentation/devicetree/bindings/media/st,stm32mp25-csi.yaml
new file mode 100644
index 000000000000..e9fa3cfea5d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stm32mp25-csi.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32mp25-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 CSI controller
+
+description:
+  The STM32 CSI controller, coupled with a D-PHY allows connecting a CSI-2
+  based camera to the DCMIPP camera pipeline.
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp25-csi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: txesc
+      - const: csi2phy
+
+  resets:
+    maxItems: 1
+
+  vdd-supply:
+    description: Digital core power supply (0.91V)
+
+  vdda18-supply:
+    description: System analog power supply (1.8V)
+
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/media/video-interfaces.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+    csi@48020000 {
+        compatible = "st,stm32mp25-csi";
+        reg = <0x48020000 0x2000>;
+        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+        resets = <&rcc CSI_R>;
+        clocks = <&rcc CK_KER_CSI>, <&rcc CK_KER_CSITXESC>, <&rcc CK_KER_CSIPHY>;
+        clock-names = "pclk", "txesc", "csi2phy";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&imx335_ep>;
+                    data-lanes = <1 2>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dcmipp_0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml b/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml
new file mode 100644
index 000000000000..73726c65cfb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stm32mp25-video-codec.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32mp25-video-codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32MP25 VDEC video decoder & VENC video encoder
+
+maintainers:
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
+
+description:
+  The STMicroelectronics STM32MP25 SOCs embeds a VDEC video hardware
+  decoder peripheral based on Verisilicon VC8000NanoD IP (former Hantro G1)
+  and a VENC video hardware encoder peripheral based on Verisilicon
+  VC8000NanoE IP (former Hantro H1).
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp25-vdec
+      - st,stm32mp25-venc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    video-codec@580d0000 {
+        compatible = "st,stm32mp25-vdec";
+        reg = <0x580d0000 0x3c8>;
+        interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ck_icn_p_vdec>;
+    };
diff --git a/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
new file mode 100644
index 000000000000..c66586d90fa2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/starfive,jh7110-camss.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/starfive,jh7110-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive SoC CAMSS ISP
+
+maintainers:
+  - Jack Zhu <jack.zhu@starfivetech.com>
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+description:
+  The Starfive CAMSS ISP is a Camera interface for Starfive JH7110 SoC. It
+  consists of a VIN controller (Video In Controller, a top-level control unit)
+  and an ISP.
+
+properties:
+  compatible:
+    const: starfive,jh7110-camss
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: syscon
+      - const: isp
+
+  clocks:
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: apb_func
+      - const: wrapper_clk_c
+      - const: dvp_inv
+      - const: axiwr
+      - const: mipi_rx0_pxl
+      - const: ispcore_2x
+      - const: isp_axi
+
+  resets:
+    maxItems: 6
+
+  reset-names:
+    items:
+      - const: wrapper_p
+      - const: wrapper_c
+      - const: axird
+      - const: axiwr
+      - const: isp_top_n
+      - const: isp_top_axi
+
+  power-domains:
+    items:
+      - description: JH7110 ISP Power Domain Switch Controller.
+
+  interrupts:
+    maxItems: 4
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Input port for receiving DVP data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-type:
+                enum: [5, 6]
+
+              bus-width:
+                enum: [8, 10, 12]
+
+              data-shift:
+                enum: [0, 2]
+                default: 0
+
+              hsync-active:
+                enum: [0, 1]
+                default: 1
+
+              vsync-active:
+                enum: [0, 1]
+                default: 1
+
+            required:
+              - bus-type
+              - bus-width
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port for receiving CSI data.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - interrupts
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    isp@19840000 {
+        compatible = "starfive,jh7110-camss";
+        reg = <0x19840000 0x10000>,
+              <0x19870000 0x30000>;
+        reg-names = "syscon", "isp";
+        clocks = <&ispcrg 0>,
+                 <&ispcrg 13>,
+                 <&ispcrg 2>,
+                 <&ispcrg 12>,
+                 <&ispcrg 1>,
+                 <&syscrg 51>,
+                 <&syscrg 52>;
+        clock-names = "apb_func",
+                      "wrapper_clk_c",
+                      "dvp_inv",
+                      "axiwr",
+                      "mipi_rx0_pxl",
+                      "ispcore_2x",
+                      "isp_axi";
+        resets = <&ispcrg 0>,
+                 <&ispcrg 1>,
+                 <&ispcrg 10>,
+                 <&ispcrg 11>,
+                 <&syscrg 41>,
+                 <&syscrg 42>;
+        reset-names = "wrapper_p",
+                      "wrapper_c",
+                      "axird",
+                      "axiwr",
+                      "isp_top_n",
+                      "isp_top_axi";
+        power-domains = <&pwrc 5>;
+        interrupts = <92>, <87>, <88>, <90>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                vin_from_sc2235: endpoint {
+                    remote-endpoint = <&sc2235_to_vin>;
+                    bus-type = <5>;
+                    bus-width = <8>;
+                    data-shift = <2>;
+                    hsync-active = <1>;
+                    vsync-active = <0>;
+                    pclk-sample = <1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                vin_from_csi2rx: endpoint {
+                    remote-endpoint = <&csi2rx_to_vin>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt
deleted file mode 100644
index ece0832fdeaf..000000000000
--- a/Documentation/devicetree/bindings/media/stih-cec.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-STMicroelectronics STIH4xx HDMI CEC driver
-
-Required properties:
- - compatible : value should be "st,stih-cec"
- - reg : Physical base address of the IP registers and length of memory
-	 mapped region.
- - clocks : from common clock binding: handle to HDMI CEC clock
- - interrupts : HDMI CEC interrupt number to the CPU.
- - pinctrl-names: Contains only one value - "default"
- - pinctrl-0: Specifies the pin control groups used for CEC hardware.
- - resets: Reference to a reset controller
- - hdmi-phandle: Phandle to the HDMI controller, see also cec.txt.
-
-Example for STIH407:
-
-sti-cec@94a087c {
-	compatible = "st,stih-cec";
-	reg = <0x94a087c 0x64>;
-	clocks = <&clk_sysin>;
-	clock-names = "cec-clk";
-	interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
-	interrupt-names = "cec-irq";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cec0_default>;
-	resets = <&softreset STIH407_LPM_SOFTRESET>;
-	hdmi-phandle = <&hdmi>;
-};
diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
deleted file mode 100644
index 880d4d70c9fd..000000000000
--- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-STMicroelectronics STi c8sectpfe binding
-============================================
-
-This document describes the c8sectpfe device bindings that is used to get transport
-stream data into the SoC on the TS pins, and into DDR for further processing.
-
-It is typically used in conjunction with one or more demodulator and tuner devices
-which converts from the RF to digital domain. Demodulators and tuners are usually
-located on an external DVB frontend card connected to SoC TS input pins.
-
-Currently 7 TS input (tsin) channels are supported on the stih407 family SoC.
-
-Required properties (controller (parent) node):
-- compatible	: Should be "stih407-c8sectpfe"
-
-- reg		: Address and length of register sets for each device in
-		  "reg-names"
-
-- reg-names	: The names of the register addresses corresponding to the
-		  registers filled in "reg":
-			- c8sectpfe: c8sectpfe registers
-			- c8sectpfe-ram: c8sectpfe internal sram
-
-- clocks	: phandle list of c8sectpfe clocks
-- clock-names	: should be "c8sectpfe"
-See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-- pinctrl-names	: a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num)
-		   must be defined for each tsin child node.
-- pinctrl-0	: phandle referencing pin configuration for this tsin configuration
-See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-
-Required properties (tsin (child) node):
-
-- tsin-num	: tsin id of the InputBlock (must be between 0 to 6)
-- i2c-bus	: phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected.
-- reset-gpios	: reset gpio for this tsin channel.
-
-Optional properties (tsin (child) node):
-
-- invert-ts-clk		: Bool property to control sense of ts input clock (data stored on falling edge of clk).
-- serial-not-parallel	: Bool property to configure input bus width (serial on ts_data<7>).
-- async-not-sync	: Bool property to control if data is received in asynchronous mode
-			   (all bits/bytes with ts_valid or ts_packet asserted are valid).
-
-- dvb-card		: Describes the NIM card connected to this tsin channel.
-
-Example:
-
-/* stih410 SoC b2120 + b2004a + stv0367-pll(NIMB) + stv0367-tda18212 (NIMA) DT example) */
-
-	c8sectpfe@8a20000 {
-		compatible = "st,stih407-c8sectpfe";
-		reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
-		reg-names = "stfe", "stfe-ram";
-		interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>;
-		interrupt-names = "stfe-error-irq", "stfe-idle-irq";
-		pinctrl-0	= <&pinctrl_tsin0_serial>;
-		pinctrl-1	= <&pinctrl_tsin0_parallel>;
-		pinctrl-2	= <&pinctrl_tsin3_serial>;
-		pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
-		pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
-		pinctrl-names	= "tsin0-serial",
-				  "tsin0-parallel",
-				  "tsin3-serial",
-				  "tsin4-serial",
-				  "tsin5-serial";
-		clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
-		clock-names = "c8sectpfe";
-
-		/* tsin0 is TSA on NIMA */
-		tsin0: port@0 {
-			tsin-num		= <0>;
-			serial-not-parallel;
-			i2c-bus			= <&ssc2>;
-			reset-gpios		= <&pio15 4 GPIO_ACTIVE_HIGH>;
-			dvb-card		= <STV0367_TDA18212_NIMA_1>;
-		};
-
-		tsin3: port@3 {
-			tsin-num		= <3>;
-			serial-not-parallel;
-			i2c-bus			= <&ssc3>;
-			reset-gpios		= <&pio15 7 GPIO_ACTIVE_HIGH>;
-			dvb-card		= <STV0367_TDA18212_NIMB_1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt
deleted file mode 100644
index c503f06f3b84..000000000000
--- a/Documentation/devicetree/bindings/media/tegra-cec.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Tegra HDMI CEC hardware
-
-The HDMI CEC module is present in Tegra SoCs and its purpose is to
-handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
-  - compatible : value should be one of the following:
-	"nvidia,tegra114-cec"
-	"nvidia,tegra124-cec"
-	"nvidia,tegra210-cec"
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-  - interrupts : HDMI CEC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to HDMI CEC clock.
-  - clock-names : from common clock binding: must contain "cec",
-		  corresponding to the entry in the clocks property.
-  - hdmi-phandle : phandle to the HDMI controller, see also cec.txt.
-
-Example:
-
-cec@70015000 {
-	compatible = "nvidia,tegra124-cec";
-	reg = <0x0 0x70015000 0x0 0x00001000>;
-	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA124_CLK_CEC>;
-	clock-names = "cec";
-};
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
index 66c5d392fa75..f1a940a110d2 100644
--- a/Documentation/devicetree/bindings/media/ti,cal.yaml
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/ti,cal.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) Device Tree Bindings
+title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
 
 maintainers:
   - Benoit Parrot <bparrot@ti.com>
@@ -47,7 +47,11 @@ properties:
     maxItems: 1
 
   ti,camerrx-control:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to device control module
+          - description: offset to the control_camerarx_core register
     description:
       phandle to the device control module and offset to the
       control_camerarx_core register
@@ -71,7 +75,7 @@ properties:
       port@0:
         $ref: /schemas/graph.yaml#/$defs/port-base
         unevaluatedProperties: false
-        description: CSI2 Port #0
+        description: 'CSI2 Port #0'
 
         properties:
           endpoint:
@@ -89,7 +93,7 @@ properties:
       port@1:
         $ref: /schemas/graph.yaml#/$defs/port-base
         unevaluatedProperties: false
-        description: CSI2 Port #1
+        description: 'CSI2 Port #1'
 
         properties:
           endpoint:
diff --git a/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml
new file mode 100644
index 000000000000..b9f033f2f3ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/ti,j721e-csi2rx-shim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E CSI2RX Shim
+
+description: |
+  The TI J721E CSI2RX Shim is a wrapper around Cadence CSI2RX bridge that
+  enables sending captured frames to memory over PSI-L DMA. In the J721E
+  Technical Reference Manual (SPRUIL1B) it is referred to as "SHIM" under the
+  CSI_RX_IF section.
+
+maintainers:
+  - Jai Luthra <jai.luthra@linux.dev>
+
+properties:
+  compatible:
+    const: ti,j721e-csi2rx-shim
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    items:
+      - const: rx0
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+patternProperties:
+  "^csi-bridge@":
+    type: object
+    description: CSI2 bridge node.
+    $ref: cdns,csi2rx.yaml#
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+  - power-domains
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    ti_csi2rx0: ticsi2rx@4500000 {
+        compatible = "ti,j721e-csi2rx-shim";
+        dmas = <&main_udmap 0x4940>;
+        dma-names = "rx0";
+        reg = <0x4500000 0x1000>;
+        power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        cdns_csi2rx: csi-bridge@4504000 {
+            compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
+            reg = <0x4504000 0x1000>;
+            clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>,
+              <&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>;
+            clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
+              "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk";
+            phys = <&dphy0>;
+            phy-names = "dphy";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                csi2_0: port@0 {
+
+                    reg = <0>;
+
+                    csi2rx0_in_sensor: endpoint {
+                        remote-endpoint = <&csi2_cam0>;
+                        bus-type = <4>; /* CSI2 DPHY. */
+                        clock-lanes = <0>;
+                        data-lanes = <1 2>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/ti,vpe.yaml b/Documentation/devicetree/bindings/media/ti,vpe.yaml
index ef473f287399..7fa8a367ed22 100644
--- a/Documentation/devicetree/bindings/media/ti,vpe.yaml
+++ b/Documentation/devicetree/bindings/media/ti,vpe.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/ti,vpe.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments DRA7x Video Processing Engine (VPE) Device Tree Bindings
+title: Texas Instruments DRA7x Video Processing Engine (VPE)
 
 maintainers:
   - Benoit Parrot <bparrot@ti.com>
diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
index 4527f56a5a6e..a81d2a155fe6 100644
--- a/Documentation/devicetree/bindings/media/video-interface-devices.yaml
+++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/video-interface-devices.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common bindings for video receiver and transmitter devices
+title: Common Properties for Video Receiver and Transmitter Devices
 
 maintainers:
   - Jacopo Mondi <jacopo@jmondi.org>
@@ -17,6 +17,14 @@ properties:
       An array of phandles, each referring to a flash LED, a sub-node of the LED
       driver device node.
 
+  leds:
+    minItems: 1
+    maxItems: 1
+
+  led-names:
+    enum:
+      - privacy
+
   lens-focus:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -120,7 +128,6 @@ properties:
 
       0 degrees camera rotation:
 
-
                     Y-Rp
                      ^
               Y-Rc   !
@@ -137,7 +144,6 @@ properties:
              0 +------------------------------------->
                0               X-Rc
 
-
                                 X-Rc                0
                <------------------------------------+ 0
                            X-Rp                 0   !
@@ -220,7 +226,6 @@ properties:
                V
               X-Rc
 
-
       Example one - Webcam
 
       A camera module installed on the user facing part of a laptop screen
@@ -265,7 +270,6 @@ properties:
       optical inversion, the two reference systems will not be aligned, with
       'Rp' being rotated 180 degrees relatively to 'Rc':
 
-
                         X-Rc                0
        <------------------------------------+ 0
                                             !
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
index 4391dce2caee..6ed4695cacf7 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.yaml
+++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/video-interfaces.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common bindings for video receiver and transmitter interface endpoints
+title: Common Properties for Video Receiver and Transmitter Interface Endpoints
 
 maintainers:
   - Sakari Ailus <sakari.ailus@linux.intel.com>
@@ -93,8 +93,9 @@ properties:
       - 4 # MIPI CSI-2 D-PHY
       - 5 # Parallel
       - 6 # BT.656
+      - 7 # DPI
     description:
-      Data bus type.
+      Data bus type. See include/dt-bindings/media/video-interfaces.h.
 
   bus-width:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -144,9 +145,10 @@ properties:
 
   pclk-sample:
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 0, 1 ]
+    enum: [ 0, 1, 2 ]
     description:
-      Sample data on rising (1) or falling (0) edge of the pixel clock signal.
+      Sample data on falling (0), rising (1) or both (2) edges of the pixel
+      clock signal.
 
   sync-on-green-active:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -158,6 +160,7 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 8
+    uniqueItems: true
     items:
       # Assume up to 9 physical lane indices
       maximum: 8
@@ -207,6 +210,27 @@ properties:
       lane-polarities property is omitted, the value must be interpreted as 0
       (normal). This property is valid for serial busses only.
 
+  line-orders:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+    items:
+      enum:
+        - 0 # ABC
+        - 1 # ACB
+        - 2 # BAC
+        - 3 # BCA
+        - 4 # CAB
+        - 5 # CBA
+    description:
+      An array of line orders of the CSI-2 C-PHY data lanes. The order of the
+      lanes are the same as in data-lanes property. Valid values are 0-5 as
+      defined in the MIPI Discovery and Configuration (DisCo) Specification for
+      Imaging. The length of the array must be the same length as the
+      data-lanes property. If the line-orders property is omitted, the value
+      shall be interpreted as 0 (ABC). This property is valid for CSI-2 C-PHY
+      busses only. See include/dt-bindings/media/video-interfaces.h.
+
   strobe:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [ 0, 1 ]
diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
index 7d77823dbb7a..43daf837fc9f 100644
--- a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
+++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Xilinx MIPI CSI-2 Receiver Subsystem
 
 maintainers:
-  - Vishal Sagar <vishal.sagar@xilinx.com>
+  - Vishal Sagar <vishal.sagar@amd.com>
 
 description: |
   The Xilinx MIPI CSI-2 Receiver Subsystem is used to capture MIPI CSI-2
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
deleted file mode 100644
index 22b77ee02f58..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-* Device tree bindings for ARM PL172/PL175/PL176 MultiPort Memory Controller
-
-Required properties:
-
-- compatible:		Must be "arm,primecell" and exactly one from
-			"arm,pl172", "arm,pl175" or "arm,pl176".
-
-- reg:			Must contains offset/length value for controller.
-
-- #address-cells:	Must be 2. The partition number has to be encoded in the
-			first address cell and it may accept values 0..N-1
-			(N - total number of partitions). The second cell is the
-			offset into the partition.
-
-- #size-cells:		Must be set to 1.
-
-- ranges:		Must contain one or more chip select memory regions.
-
-- clocks:		Must contain references to controller clocks.
-
-- clock-names:		Must contain "mpmcclk" and "apb_pclk".
-
-- clock-ranges:		Empty property indicating that child nodes can inherit
-			named clocks. Required only if clock tree data present
-			in device tree.
-			See clock-bindings.txt
-
-Child chip-select (cs) nodes contain the memory devices nodes connected to
-such as NOR (e.g. cfi-flash) and NAND.
-
-Required child cs node properties:
-
-- #address-cells:	Must be 2.
-
-- #size-cells:		Must be 1.
-
-- ranges:		Empty property indicating that child nodes can inherit
-			memory layout.
-
-- clock-ranges:		Empty property indicating that child nodes can inherit
-			named clocks. Required only if clock tree data present
-			in device tree.
-
-- mpmc,cs:		Chip select number. Indicates to the pl0172 driver
-			which chipselect is used for accessing the memory.
-
-- mpmc,memory-width:	Width of the chip select memory. Must be equal to
-			either 8, 16 or 32.
-
-Optional child cs node config properties:
-
-- mpmc,async-page-mode:	Enable asynchronous page mode.
-
-- mpmc,cs-active-high:	Set chip select polarity to active high.
-
-- mpmc,byte-lane-low:	Set byte lane state to low.
-
-- mpmc,extended-wait:	Enable extended wait.
-
-- mpmc,buffer-enable:	Enable write buffer, option is not supported by
-			PL175 and PL176 controllers.
-
-- mpmc,write-protect:	Enable write protect.
-
-Optional child cs node timing properties:
-
-- mpmc,write-enable-delay:	Delay from chip select assertion to write
-				enable (WE signal) in nano seconds.
-
-- mpmc,output-enable-delay:	Delay from chip select assertion to output
-				enable (OE signal) in nano seconds.
-
-- mpmc,write-access-delay:	Delay from chip select assertion to write
-				access in nano seconds.
-
-- mpmc,read-access-delay:	Delay from chip select assertion to read
-				access in nano seconds.
-
-- mpmc,page-mode-read-delay:	Delay for asynchronous page mode sequential
-				accesses in nano seconds.
-
-- mpmc,turn-round-delay:	Delay between access to memory banks in nano
-				seconds.
-
-If any of the above timing parameters are absent, current parameter value will
-be taken from the corresponding HW reg.
-
-Example for pl172 with nor flash on chip select 0 shown below.
-
-emc: memory-controller@40005000 {
-	compatible = "arm,pl172", "arm,primecell";
-	reg = <0x40005000 0x1000>;
-	clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
-	clock-names = "mpmcclk", "apb_pclk";
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <0 0 0x1c000000 0x1000000
-		  1 0 0x1d000000 0x1000000
-		  2 0 0x1e000000 0x1000000
-		  3 0 0x1f000000 0x1000000>;
-
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
-		mpmc,cs = <0>;
-		mpmc,memory-width = <16>;
-		mpmc,byte-lane-low;
-		mpmc,write-enable-delay = <0>;
-		mpmc,output-enable-delay = <0>;
-		mpmc,read-enable-delay = <70>;
-		mpmc,page-mode-read-delay = <70>;
-
-		flash@0,0 {
-			compatible = "sst,sst39vf320", "cfi-flash";
-			reg = <0 0 0x400000>;
-			bank-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "data";
-				reg = <0 0x400000>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.yaml
new file mode 100644
index 000000000000..c1b702669bd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.yaml
@@ -0,0 +1,222 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/arm,pl172.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PL172/PL175/PL176 MultiPort Memory Controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl172
+          - arm,pl175
+          - arm,pl176
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl172
+          - arm,pl175
+          - arm,pl176
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: mpmcclk
+      - const: apb_pclk
+
+  clock-ranges: true
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^cs[0-9]$":
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^flash@[0-9],[0-9a-f]+$":
+        type: object
+        $ref: /schemas/mtd/mtd-physmap.yaml#
+        unevaluatedProperties: false
+
+      "^(gpio|sram)@[0-9],[0-9a-f]+$":
+        type: object
+        additionalProperties: true
+
+    properties:
+      '#address-cells':
+        const: 2
+
+      '#size-cells':
+        const: 1
+
+      ranges: true
+
+      clocks:
+        maxItems: 2
+
+      clock-ranges: true
+
+      mpmc,cs:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Chip select number. Indicates to the pl0172 driver
+          which chipselect is used for accessing the memory.
+
+      mpmc,memory-width:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [8, 16, 32]
+        description:
+          Width of the chip select memory. Must be equal to either 8, 16 or 32.
+
+      mpmc,async-page-mode:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Enable asynchronous page mode.
+
+      mpmc,cs-active-high:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Set chip select polarity to active high.
+
+      mpmc,byte-lane-low:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Set byte lane state to low.
+
+      mpmc,extended-wait:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Enable extended wait.
+
+      mpmc,buffer-enable:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Enable write buffer, option is not supported by
+          PL175 and PL176 controllers.
+
+      mpmc,write-protect:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          Enable write protect.
+
+      mpmc,read-enable-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Delay from chip select assertion to read
+          enable (RE signal) in nano seconds.
+
+      mpmc,write-enable-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Delay from chip select assertion to write
+          enable (WE signal) in nano seconds.
+
+      mpmc,output-enable-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Delay from chip select assertion to output
+          enable (OE signal) in nano seconds.
+
+      mpmc,write-access-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Delay from chip select assertion to write
+          access in nano seconds.
+
+      mpmc,read-access-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Delay from chip select assertion to read
+          access in nano seconds.
+
+      mpmc,page-mode-read-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Delay for asynchronous page mode sequential
+          accesses in nano seconds.
+
+      mpmc,turn-round-delay:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Delay between access to memory banks in nano
+          seconds.
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+    memory-controller@40005000 {
+        compatible = "arm,pl172", "arm,primecell";
+        reg = <0x40005000 0x1000>;
+        clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
+        clock-names = "mpmcclk", "apb_pclk";
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0 0x1c000000 0x1000000
+                  1 0 0x1d000000 0x1000000
+                  2 0 0x1e000000 0x1000000
+                  3 0 0x1f000000 0x1000000>;
+
+        cs0 {
+            #address-cells = <2>;
+            #size-cells = <1>;
+            ranges;
+
+            mpmc,cs = <0>;
+            mpmc,memory-width = <16>;
+            mpmc,byte-lane-low;
+            mpmc,write-enable-delay = <0>;
+            mpmc,output-enable-delay = <0>;
+            mpmc,read-enable-delay = <70>;
+            mpmc,page-mode-read-delay = <70>;
+
+            flash@0,0 {
+                compatible = "sst,sst39vf320", "cfi-flash";
+                reg = <0 0 0x400000>;
+                bank-width = <2>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+                partition@0 {
+                    label = "data";
+                    reg = <0 0x400000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
deleted file mode 100644
index 01c9acf9275d..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
+++ /dev/null
@@ -1,130 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/memory-controllers/arm,pl353-smc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: ARM PL353 Static Memory Controller (SMC) device-tree bindings
-
-maintainers:
-  - Miquel Raynal <miquel.raynal@bootlin.com>
-  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
-
-description:
-  The PL353 Static Memory Controller is a bus where you can connect two kinds
-  of memory interfaces, which are NAND and memory mapped interfaces (such as
-  SRAM or NOR).
-
-# We need a select here so we don't match all nodes with 'arm,primecell'
-select:
-  properties:
-    compatible:
-      contains:
-        const: arm,pl353-smc-r2p1
-  required:
-    - compatible
-
-properties:
-  $nodename:
-    pattern: "^memory-controller@[0-9a-f]+$"
-
-  compatible:
-    items:
-      - const: arm,pl353-smc-r2p1
-      - const: arm,primecell
-
-  "#address-cells":
-    const: 2
-
-  "#size-cells":
-    const: 1
-
-  reg:
-    items:
-      - description:
-          Configuration registers for the host and sub-controllers.
-          The three chip select regions are defined in 'ranges'.
-
-  clocks:
-    items:
-      - description: clock for the memory device bus
-      - description: main clock of the SMC
-
-  clock-names:
-    items:
-      - const: memclk
-      - const: apb_pclk
-
-  ranges:
-    minItems: 1
-    description: |
-      Memory bus areas for interacting with the devices. Reflects
-      the memory layout with four integer values following:
-      <cs-number> 0 <offset> <size>
-    items:
-      - description: NAND bank 0
-      - description: NOR/SRAM bank 0
-      - description: NOR/SRAM bank 1
-
-  interrupts: true
-
-patternProperties:
-  "@[0-3],[a-f0-9]+$":
-    type: object
-    description: |
-      The child device node represents the controller connected to the SMC
-      bus. The controller can be a NAND controller or a pair of any memory
-      mapped controllers such as NOR and SRAM controllers.
-
-    properties:
-      compatible:
-        description:
-          Compatible of memory controller.
-
-      reg:
-        items:
-          - items:
-              - description: |
-                  Chip-select ID, as in the parent range property.
-                minimum: 0
-                maximum: 2
-              - description: |
-                  Offset of the memory region requested by the device.
-              - description: |
-                  Length of the memory region requested by the device.
-
-    required:
-      - compatible
-      - reg
-
-required:
-  - compatible
-  - reg
-  - clock-names
-  - clocks
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    smcc: memory-controller@e000e000 {
-      compatible = "arm,pl353-smc-r2p1", "arm,primecell";
-      reg = <0xe000e000 0x0001000>;
-      clock-names = "memclk", "apb_pclk";
-      clocks = <&clkc 11>, <&clkc 44>;
-      ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
-                0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
-                0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
-      #address-cells = <2>;
-      #size-cells = <1>;
-
-      nfc0: nand-controller@0,0 {
-        compatible = "arm,pl353-nand-r2p1";
-        reg = <0 0 0x1000000>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-      };
-    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml
new file mode 100644
index 000000000000..05dd6b3a1a3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/arm,pl35x-smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm PL35x Series Static Memory Controller (SMC)
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  The PL35x Static Memory Controller is a bus where you can connect two kinds
+  of memory interfaces, which are NAND and memory mapped interfaces (such as
+  SRAM or NOR) depending on the specific configuration.
+
+  The TRM is available here:
+  https://documentation-service.arm.com/static/5e8e2524fd977155116a58aa
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl353-smc-r2p1
+          - arm,pl354
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - arm,pl353-smc-r2p1
+          - arm,pl354
+      - const: arm,primecell
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  reg:
+    items:
+      - description:
+          Configuration registers for the host and sub-controllers.
+          The three chip select regions are defined in 'ranges'.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  ranges:
+    minItems: 1
+    maxItems: 8
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Combined or Memory interface 0 IRQ
+      - description: Memory interface 1 IRQ
+
+patternProperties:
+  "@[0-7],[a-f0-9]+$":
+    type: object
+    additionalProperties: true
+    description: |
+      The child device node represents the controller connected to the SMC
+      bus. The controller can be a NAND controller or a pair of any memory
+      mapped controllers such as NOR and SRAM controllers.
+
+    properties:
+      compatible:
+        description:
+          Compatible of memory controller.
+
+      reg:
+        items:
+          - items:
+              - description: |
+                  Chip-select ID, as in the parent range property.
+                minimum: 0
+                maximum: 7
+              - description: |
+                  Offset of the memory region requested by the device.
+              - description: |
+                  Length of the memory region requested by the device.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,pl354
+    then:
+      properties:
+        clocks:
+          # According to TRM, really should be 3 clocks
+          maxItems: 1
+
+        clock-names:
+          const: apb_pclk
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: clock for the memory device bus
+            - description: main clock of the SMC
+
+        clock-names:
+          items:
+            - const: memclk
+            - const: apb_pclk
+
+examples:
+  - |
+    smcc: memory-controller@e000e000 {
+      compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+      reg = <0xe000e000 0x0001000>;
+      clock-names = "memclk", "apb_pclk";
+      clocks = <&clkc 11>, <&clkc 44>;
+      ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+                0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+                0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+      #address-cells = <2>;
+      #size-cells = <1>;
+
+      nfc0: nand-controller@0,0 {
+        compatible = "arm,pl353-nand-r2p1";
+        reg = <0 0 0x1000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
new file mode 100644
index 000000000000..3328c8df8190
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/brcm,brcmstb-memc-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory controller (MEMC) for Broadcom STB
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: Revision > 2.1 controllers
+        items:
+          - enum:
+              - brcm,brcmstb-memc-ddr-rev-b.2.2
+              - brcm,brcmstb-memc-ddr-rev-b.2.3
+              - brcm,brcmstb-memc-ddr-rev-b.2.5
+              - brcm,brcmstb-memc-ddr-rev-b.2.6
+              - brcm,brcmstb-memc-ddr-rev-b.2.7
+              - brcm,brcmstb-memc-ddr-rev-b.2.8
+              - brcm,brcmstb-memc-ddr-rev-b.3.0
+              - brcm,brcmstb-memc-ddr-rev-b.3.1
+              - brcm,brcmstb-memc-ddr-rev-c.1.0
+              - brcm,brcmstb-memc-ddr-rev-c.1.1
+              - brcm,brcmstb-memc-ddr-rev-c.1.2
+              - brcm,brcmstb-memc-ddr-rev-c.1.3
+              - brcm,brcmstb-memc-ddr-rev-c.1.4
+          - const: brcm,brcmstb-memc-ddr-rev-b.2.1
+          - const: brcm,brcmstb-memc-ddr
+      - description: Revision 2.1 controllers
+        items:
+          - const: brcm,brcmstb-memc-ddr-rev-b.2.1
+          - const: brcm,brcmstb-memc-ddr
+      - description: Revision 2.0 controllers
+        items:
+          - const: brcm,brcmstb-memc-ddr-rev-b.2.0
+          - const: brcm,brcmstb-memc-ddr
+      - description: Revision 1.x controllers
+        items:
+          - const: brcm,brcmstb-memc-ddr-rev-b.1.x
+          - const: brcm,brcmstb-memc-ddr
+      - description: Revision 0.x controllers
+        items:
+          - const: brcm,brcmstb-memc-ddr-rev-a.0.0
+          - const: brcm,brcmstb-memc-ddr
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    description: DDR PHY frequency in Hz
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@9902000 {
+        compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1",
+                     "brcm,brcmstb-memc-ddr-rev-b.2.1",
+                     "brcm,brcmstb-memc-ddr";
+        reg = <0x9902000 0x600>;
+        clock-frequency = <2133000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
index 769f13250047..08cbdcddfead 100644
--- a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: DDR PHY Front End (DPFE) for Broadcom STB
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Markus Mayer <mmayer@broadcom.com>
 
 properties:
diff --git a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
index 96d563fd61f5..e42aa488704d 100644
--- a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/calxeda-ddr-ctrlr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Calxeda DDR memory controller binding
+title: Calxeda DDR memory controller
 
 description: |
   The Calxeda DDR memory controller is initialised and programmed by the
diff --git a/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
new file mode 100644
index 000000000000..f81fb866e319
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/canaan,k210-sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan K210 SRAM memory controller
+
+description:
+  The Canaan K210 SRAM memory controller is responsible for the system's 8 MiB
+  of SRAM. The controller is initialised by the bootloader, which configures
+  its clocks, before OS bringup.
+
+maintainers:
+  - Conor Dooley <conor@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - canaan,k210-sram
+
+  clocks:
+    minItems: 1
+    items:
+      - description: sram0 clock
+      - description: sram1 clock
+      - description: aisram clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sram0
+      - const: sram1
+      - const: aisram
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    memory-controller {
+        compatible = "canaan,k210-sram";
+        clocks = <&sysclk K210_CLK_SRAM0>,
+                 <&sysclk K210_CLK_SRAM1>,
+                 <&sysclk K210_CLK_AI>;
+        clock-names = "sram0", "sram1", "aisram";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml
new file mode 100644
index 000000000000..34b5bd153f63
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-channel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR channel with chip/rank topology description
+
+description:
+  An LPDDR channel is a completely independent set of LPDDR pins (DQ, CA, CS,
+  CK, etc.) that connect one or more LPDDR chips to a host system. The main
+  purpose of this node is to overall LPDDR topology of the system, including the
+  amount of individual LPDDR chips and the ranks per chip.
+
+maintainers:
+  - Julius Werner <jwerner@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - jedec,lpddr2-channel
+      - jedec,lpddr3-channel
+      - jedec,lpddr4-channel
+      - jedec,lpddr5-channel
+
+  io-width:
+    description:
+      The number of DQ pins in the channel. If this number is different
+      from (a multiple of) the io-width of the LPDDR chip, that means that
+      multiple instances of that type of chip are wired in parallel on this
+      channel (with the channel's DQ pins split up between the different
+      chips, and the CA, CS, etc. pins of the different chips all shorted
+      together).  This means that the total physical memory controlled by a
+      channel is equal to the sum of the densities of each rank on the
+      connected LPDDR chip, times the io-width of the channel divided by
+      the io-width of the LPDDR chip.
+    enum:
+      - 8
+      - 16
+      - 32
+      - 64
+      - 128
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^rank@[0-9]+$":
+    type: object
+    description:
+      Each physical LPDDR chip may have one or more ranks. Ranks are
+      internal but fully independent sub-units of the chip. Each LPDDR bus
+      transaction on the channel targets exactly one rank, based on the
+      state of the CS pins. Different ranks may have different densities and
+      timing requirements.
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr2-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr2.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr3-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr4-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr4.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr5-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr5.yaml#
+
+required:
+  - compatible
+  - io-width
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    lpddr-channel0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "jedec,lpddr3-channel";
+      io-width = <32>;
+
+      rank@0 {
+        compatible = "lpddr3-ff,0100", "jedec,lpddr3";
+        reg = <0>;
+        density = <8192>;
+        io-width = <16>;
+        revision-id = <1 0>;
+      };
+    };
+
+    lpddr-channel1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "jedec,lpddr4-channel";
+      io-width = <32>;
+
+      rank@0 {
+        compatible = "lpddr4-05,0301", "jedec,lpddr4";
+        reg = <0>;
+        density = <4096>;
+        io-width = <32>;
+        revision-id = <3 1>;
+      };
+
+      rank@1 {
+        compatible = "lpddr4-05,0301", "jedec,lpddr4";
+        reg = <1>;
+        density = <2048>;
+        io-width = <32>;
+        revision-id = <3 1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml
new file mode 100644
index 000000000000..30267ce70124
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for LPDDR types
+
+description:
+  Different LPDDR types generally use the same properties and only differ in the
+  range of legal values for each. This file defines the common parts that can be
+  reused for each type. Nodes using this schema should generally be nested under
+  an LPDDR channel node.
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    description:
+      Compatible strings can be either explicit vendor names and part numbers
+      (e.g. elpida,ECB240ABACN), or generated strings of the form
+      lpddrX-YY,ZZZZ where X is the LPDDR version, YY is the manufacturer ID
+      (from MR5) and ZZZZ is the revision ID (from MR6 and MR7). Both IDs are
+      formatted in lower case hexadecimal representation with leading zeroes.
+      The latter form can be useful when LPDDR nodes are created at runtime by
+      boot firmware that doesn't have access to static part number information.
+
+  reg:
+    description:
+      The rank number of this LPDDR rank when used as a subnode to an LPDDR
+      channel.
+    minimum: 0
+    maximum: 3
+
+  revision-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. <MR6 MR7>).
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 255
+
+  density:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Density in megabits of SDRAM chip. Decoded from Mode Register 8.
+    enum:
+      - 64
+      - 128
+      - 256
+      - 512
+      - 1024
+      - 2048
+      - 3072
+      - 4096
+      - 6144
+      - 8192
+      - 12288
+      - 16384
+      - 24576
+      - 32768
+
+  io-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      IO bus width in bits of SDRAM chip. Decoded from Mode Register 8.
+    enum:
+      - 8
+      - 16
+      - 32
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
new file mode 100644
index 000000000000..1daa66592477
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: jedec,lpddr2-timings
+
+  max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+
+  min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Minimum DDR clock frequency for the speed-bin, in Hz.
+
+  tCKESR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in pico seconds.
+
+  tDQSCK-max:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DQS output data access time from CK_t/CK_c in pico seconds.
+
+  tDQSCK-max-derated:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DQS output data access time from CK_t/CK_c, temperature de-rated, in pico
+      seconds.
+
+  tFAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Four-bank activate window in pico seconds.
+
+  tRAS-max-ns:
+    description: |
+      Row active time in nano seconds.
+
+  tRAS-min:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row active time in pico seconds.
+
+  tRCD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RAS-to-CAS delay in pico seconds.
+
+  tRPab:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (all banks) in pico seconds.
+
+  tRRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Active bank A to active bank B in pico seconds.
+
+  tRTP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal READ to PRECHARGE command delay in pico seconds.
+
+  tWR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      WRITE recovery time in pico seconds.
+
+  tWTR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal WRITE-to-READ command delay in pico seconds.
+
+  tXP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Exit power-down to next valid command delay in pico seconds.
+
+  tZQCL:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Long calibration time in pico seconds.
+
+  tZQCS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Short calibration time in pico seconds.
+
+  tZQinit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Initialization calibration time in pico seconds.
+
+required:
+  - compatible
+  - min-freq
+  - max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    timings {
+        compatible = "jedec,lpddr2-timings";
+        min-freq = <10000000>;
+        max-freq = <400000000>;
+        tCKESR = <15000>;
+        tDQSCK-max = <5500>;
+        tFAW = <50000>;
+        tRAS-max-ns = <70000>;
+        tRAS-min = <42000>;
+        tRPab = <21000>;
+        tRCD = <18000>;
+        tRRD = <10000>;
+        tRTP = <7500>;
+        tWR = <15000>;
+        tWTR = <7500>;
+        tXP = <7500>;
+        tZQCL = <360000>;
+        tZQCS = <90000>;
+        tZQinit = <1000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
index 25ed0266f6dd..a237bc259273 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
@@ -7,7 +7,10 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: LPDDR2 SDRAM compliant to JEDEC JESD209-2
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
 
 properties:
   compatible:
@@ -17,50 +20,31 @@ properties:
               - elpida,ECB240ABACN
               - elpida,B8132B2PB-6D-F
           - enum:
-              - jedec,lpddr2-s4
-      - items:
-          - enum:
+              - jedec,lpddr2-nvm
               - jedec,lpddr2-s2
+              - jedec,lpddr2-s4
       - items:
+          - pattern: "^lpddr2-[0-9a-f]{2},[0-9a-f]{4}$"
           - enum:
               - jedec,lpddr2-nvm
+              - jedec,lpddr2-s2
+              - jedec,lpddr2-s4
 
   revision-id1:
     $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 255
     description: |
       Revision 1 value of SDRAM chip. Obtained from device datasheet.
+      Property is deprecated, use revision-id instead.
+    deprecated: true
 
   revision-id2:
     $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 255
     description: |
       Revision 2 value of SDRAM chip. Obtained from device datasheet.
-
-  density:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
-      Density in megabits of SDRAM chip. Obtained from device datasheet.
-    enum:
-      - 64
-      - 128
-      - 256
-      - 512
-      - 1024
-      - 2048
-      - 4096
-      - 8192
-      - 16384
-      - 32768
-
-  io-width:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
-      IO bus width in bits of SDRAM chip. Obtained from device datasheet.
-    enum:
-      - 32
-      - 16
-      - 8
+      Property is deprecated, use revision-id instead.
+    deprecated: true
 
   tRRD-min-tck:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -142,21 +126,19 @@ properties:
 
 patternProperties:
   "^lpddr2-timings":
-    type: object
+    $ref: jedec,lpddr2-timings.yaml
     description: |
       The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
       "lpddr2-timings" provides AC timing parameters of the device for
       a given speed-bin. The user may provide the timings for as many
-      speed-bins as is required. Please see Documentation/devicetree/
-      bindings/memory-controllers/ddr/lpddr2-timings.txt for more information
-      on "lpddr2-timings".
+      speed-bins as is required.
 
 required:
   - compatible
   - density
   - io-width
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -164,8 +146,7 @@ examples:
         compatible = "elpida,ECB240ABACN", "jedec,lpddr2-s4";
         density = <2048>;
         io-width = <32>;
-        revision-id1 = <1>;
-        revision-id2 = <0>;
+        revision-id = <1 0>;
 
         tRPab-min-tck = <3>;
         tRCD-min-tck = <3>;
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
new file mode 100644
index 000000000000..5c6512c1e1e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: jedec,lpddr3-timings
+
+  reg:
+    maxItems: 1
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+      Property is deprecated, use max-freq.
+    deprecated: true
+
+  max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+
+  min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Minimum DDR clock frequency for the speed-bin, in Hz.
+
+  tCKE:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in pico seconds.
+
+  tCKESR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in pico seconds.
+
+  tFAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Four-bank activate window in pico seconds.
+
+  tMRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Mode register set command delay in pico seconds.
+
+  tR2R-C2C:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Additional READ-to-READ delay in chip-to-chip cases in pico seconds.
+
+  tRAS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row active time in pico seconds.
+
+  tRC:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      ACTIVATE-to-ACTIVATE command period in pico seconds.
+
+  tRCD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RAS-to-CAS delay in pico seconds.
+
+  tRFC:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Refresh Cycle time in pico seconds.
+
+  tRPab:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (all banks) in pico seconds.
+
+  tRPpb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (single banks) in pico seconds.
+
+  tRRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Active bank A to active bank B in pico seconds.
+
+  tRTP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal READ to PRECHARGE command delay in pico seconds.
+
+  tW2W-C2C:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Additional WRITE-to-WRITE delay in chip-to-chip cases in pico seconds.
+
+  tWR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      WRITE recovery time in pico seconds.
+
+  tWTR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal WRITE-to-READ command delay in pico seconds.
+
+  tXP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Exit power-down to next valid command delay in pico seconds.
+
+  tXSR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SELF REFRESH exit to next valid command delay in pico seconds.
+
+required:
+  - compatible
+  - min-freq
+  - max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    lpddr3 {
+        timings {
+            compatible = "jedec,lpddr3-timings";
+            max-freq = <800000000>;
+            min-freq = <100000000>;
+            tCKE = <3750>;
+            tCKESR = <3750>;
+            tFAW = <25000>;
+            tMRD = <7000>;
+            tR2R-C2C = <0>;
+            tRAS = <23000>;
+            tRC = <33750>;
+            tRCD = <10000>;
+            tRFC = <65000>;
+            tRPab = <12000>;
+            tRPpb = <12000>;
+            tRRD = <6000>;
+            tRTP = <3750>;
+            tW2W-C2C = <0>;
+            tWR = <7500>;
+            tWTR = <3750>;
+            tXP = <3750>;
+            tXSR = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
new file mode 100644
index 000000000000..e328a1195ba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM compliant to JEDEC JESD209-3
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,K3QF2F20DB
+          - const: jedec,lpddr3
+      - items:
+          - pattern: "^lpddr3-[0-9a-f]{2},[0-9a-f]{4}$"
+          - const: jedec,lpddr3
+
+  '#address-cells':
+    const: 1
+    deprecated: true
+
+  manufacturer-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Manufacturer ID value read from Mode Register 5.  The property is
+      deprecated, manufacturer should be derived from the compatible.
+    deprecated: true
+
+  '#size-cells':
+    const: 0
+    deprecated: true
+
+  tCKE-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+      of clock cycles.
+
+  tCKESR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in terms of number of clock cycles.
+
+  tDQSCK-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      DQS output data access time from CK_t/CK_c in terms of number of clock
+      cycles.
+
+  tFAW-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      Four-bank activate window in terms of number of clock cycles.
+
+  tMRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Mode register set command delay in terms of number of clock cycles.
+
+  tR2R-C2C-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Additional READ-to-READ delay in chip-to-chip cases in terms of number
+      of clock cycles.
+
+  tRAS-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      Row active time in terms of number of clock cycles.
+
+  tRC-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      ACTIVATE-to-ACTIVATE command period in terms of number of clock cycles.
+
+  tRCD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      RAS-to-CAS delay in terms of number of clock cycles.
+
+  tRFC-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Refresh Cycle time in terms of number of clock cycles.
+
+  tRL-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+     READ data latency in terms of number of clock cycles.
+
+  tRPab-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Row precharge time (all banks) in terms of number of clock cycles.
+
+  tRPpb-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Row precharge time (single banks) in terms of number of clock cycles.
+
+  tRRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Active bank A to active bank B in terms of number of clock cycles.
+
+  tRTP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Internal READ to PRECHARGE command delay in terms of number of clock
+      cycles.
+
+  tW2W-C2C-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Additional WRITE-to-WRITE delay in chip-to-chip cases in terms of number
+      of clock cycles.
+
+  tWL-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      WRITE data latency in terms of number of clock cycles.
+
+  tWR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      WRITE recovery time in terms of number of clock cycles.
+
+  tWTR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Internal WRITE-to-READ command delay in terms of number of clock cycles.
+
+  tXP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Exit power-down to next valid command delay in terms of number of clock
+      cycles.
+
+  tXSR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1023
+    description: |
+      SELF REFRESH exit to next valid command delay in terms of number of clock
+      cycles.
+
+patternProperties:
+  "^timings((-[0-9])+|(@[0-9a-f]+))?$":
+    $ref: jedec,lpddr3-timings.yaml
+    description: |
+      The lpddr3 node may have one or more child nodes with timings.
+      Each timing node provides AC timing parameters of the device for a given
+      speed-bin. The user may provide the timings for as many speed-bins as is
+      required.
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lpddr3 {
+        compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
+        density = <16384>;
+        io-width = <32>;
+
+        tCKE-min-tck = <2>;
+        tCKESR-min-tck = <2>;
+        tDQSCK-min-tck = <5>;
+        tFAW-min-tck = <5>;
+        tMRD-min-tck = <5>;
+        tR2R-C2C-min-tck = <0>;
+        tRAS-min-tck = <5>;
+        tRC-min-tck = <6>;
+        tRCD-min-tck = <3>;
+        tRFC-min-tck = <17>;
+        tRL-min-tck = <14>;
+        tRPab-min-tck = <2>;
+        tRPpb-min-tck = <2>;
+        tRRD-min-tck = <2>;
+        tRTP-min-tck = <2>;
+        tW2W-C2C-min-tck = <0>;
+        tWL-min-tck = <8>;
+        tWR-min-tck = <7>;
+        tWTR-min-tck = <2>;
+        tXP-min-tck = <2>;
+        tXSR-min-tck = <12>;
+
+        timings {
+            compatible = "jedec,lpddr3-timings";
+            max-freq = <800000000>;
+            min-freq = <100000000>;
+            tCKE = <3750>;
+            tCKESR = <3750>;
+            tFAW = <25000>;
+            tMRD = <7000>;
+            tR2R-C2C = <0>;
+            tRAS = <23000>;
+            tRC = <33750>;
+            tRCD = <10000>;
+            tRFC = <65000>;
+            tRPab = <12000>;
+            tRPpb = <12000>;
+            tRRD = <6000>;
+            tRTP = <3750>;
+            tW2W-C2C = <0>;
+            tWR = <7500>;
+            tWTR = <3750>;
+            tXP = <3750>;
+            tXSR = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml
new file mode 100644
index 000000000000..a078892fecee
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR4 SDRAM compliant to JEDEC JESD209-4
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: "^lpddr4-[0-9a-f]{2},[0-9a-f]{4}$"
+      - const: jedec,lpddr4
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lpddr {
+        compatible = "lpddr4-ff,0100", "jedec,lpddr4";
+        density = <8192>;
+        io-width = <16>;
+        revision-id = <1 0>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml
new file mode 100644
index 000000000000..e441dac5f154
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR5 SDRAM compliant to JEDEC JESD209-5
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: "^lpddr5-[0-9a-f]{2},[0-9a-f]{4}$"
+      - const: jedec,lpddr5
+
+  serial-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Serial IDs read from Mode Registers 47 through 54. One byte per uint32
+      cell (i.e. <MR47 MR48 MR49 MR50 MR51 MR52 MR53 MR54>).
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 255
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lpddr {
+        compatible = "lpddr5-01,0200", "jedec,lpddr5";
+        density = <8192>;
+        io-width = <8>;
+        revision-id = <2 0>;
+        serial-id = <3 1 0 0 0 0 0 0>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
deleted file mode 100644
index 9ceb19e0c7fd..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr2-timings.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
-
-Required properties:
-- compatible : Should be "jedec,lpddr2-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds). Parameters with
-a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
-- tRCD
-- tWR
-- tRAS-min
-- tRRD
-- tWTR
-- tXP
-- tRTP
-- tDQSCK-max
-- tFAW
-- tZQCS
-- tZQinit
-- tRPab
-- tZQCL
-- tCKESR
-- tRAS-max-ns
-- tDQSCK-max-derated
-
-Example:
-
-timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
-	compatible	= "jedec,lpddr2-timings";
-	min-freq	= <10000000>;
-	max-freq	= <400000000>;
-	tRPab		= <21000>;
-	tRCD		= <18000>;
-	tWR		= <15000>;
-	tRAS-min	= <42000>;
-	tRRD		= <10000>;
-	tWTR		= <7500>;
-	tXP		= <7500>;
-	tRTP		= <7500>;
-	tCKESR		= <15000>;
-	tDQSCK-max	= <5500>;
-	tFAW		= <50000>;
-	tZQCS		= <90000>;
-	tZQCL		= <360000>;
-	tZQinit		= <1000000>;
-	tRAS-max-ns	= <70000>;
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
deleted file mode 100644
index 84705e50a3fd..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* AC timing parameters of LPDDR3 memories for a given speed-bin.
-
-The structures are based on LPDDR2 and extended where needed.
-
-Required properties:
-- compatible : Should be "jedec,lpddr3-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds).
-- tRFC
-- tRRD
-- tRPab
-- tRPpb
-- tRCD
-- tRC
-- tRAS
-- tWTR
-- tWR
-- tRTP
-- tW2W-C2C
-- tR2R-C2C
-- tFAW
-- tXSR
-- tXP
-- tCKE
-- tCKESR
-- tMRD
-
-Example:
-
-timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
-	compatible	= "jedec,lpddr3-timings";
-	reg		= <800000000>; /* workaround: it shows max-freq */
-	min-freq	= <100000000>;
-	tRFC		= <65000>;
-	tRRD		= <6000>;
-	tRPab		= <12000>;
-	tRPpb		= <12000>;
-	tRCD		= <10000>;
-	tRC		= <33750>;
-	tRAS		= <23000>;
-	tWTR		= <3750>;
-	tWR		= <7500>;
-	tRTP		= <3750>;
-	tW2W-C2C	= <0>;
-	tR2R-C2C	= <0>;
-	tFAW		= <25000>;
-	tXSR		= <70000>;
-	tXP		= <3750>;
-	tCKE		= <3750>;
-	tCKESR		= <3750>;
-	tMRD		= <7000>;
-};
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt b/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
deleted file mode 100644
index 031af5fb0379..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-* LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C
-
-Required properties:
-- compatible : Should be "<vendor>,<type>", and generic value "jedec,lpddr3".
-  Example "<vendor>,<type>" values:
-    "samsung,K3QF2F20DB"
-
-- density  : <u32> representing density in Mb (Mega bits)
-- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
-- #address-cells: Must be set to 1
-- #size-cells: Must be set to 0
-
-Optional properties:
-
-- manufacturer-id : <u32>     Manufacturer ID value read from Mode Register 5
-- revision-id     : <u32 u32> Revision IDs read from Mode Registers 6 and 7
-
-The following optional properties represent the minimum value of some AC
-timing parameters of the DDR device in terms of number of clock cycles.
-These values shall be obtained from the device data-sheet.
-- tRFC-min-tck
-- tRRD-min-tck
-- tRPab-min-tck
-- tRPpb-min-tck
-- tRCD-min-tck
-- tRC-min-tck
-- tRAS-min-tck
-- tWTR-min-tck
-- tWR-min-tck
-- tRTP-min-tck
-- tW2W-C2C-min-tck
-- tR2R-C2C-min-tck
-- tWL-min-tck
-- tDQSCK-min-tck
-- tRL-min-tck
-- tFAW-min-tck
-- tXSR-min-tck
-- tXP-min-tck
-- tCKE-min-tck
-- tCKESR-min-tck
-- tMRD-min-tck
-
-Child nodes:
-- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
-  "lpddr3-timings" provides AC timing parameters of the device for
-  a given speed-bin. Please see
-  Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3-timings.txt
-  for more information on "lpddr3-timings"
-
-Example:
-
-samsung_K3QF2F20DB: lpddr3 {
-	compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
-	density		= <16384>;
-	io-width	= <32>;
-	manufacturer-id = <1>;
-	revision-id     = <123 234>;
-	#address-cells	= <1>;
-	#size-cells	= <0>;
-
-	tRFC-min-tck		= <17>;
-	tRRD-min-tck		= <2>;
-	tRPab-min-tck		= <2>;
-	tRPpb-min-tck		= <2>;
-	tRCD-min-tck		= <3>;
-	tRC-min-tck		= <6>;
-	tRAS-min-tck		= <5>;
-	tWTR-min-tck		= <2>;
-	tWR-min-tck		= <7>;
-	tRTP-min-tck		= <2>;
-	tW2W-C2C-min-tck	= <0>;
-	tR2R-C2C-min-tck	= <0>;
-	tWL-min-tck		= <8>;
-	tDQSCK-min-tck		= <5>;
-	tRL-min-tck		= <14>;
-	tFAW-min-tck		= <5>;
-	tXSR-min-tck		= <12>;
-	tXP-min-tck		= <2>;
-	tCKE-min-tck		= <2>;
-	tCKESR-min-tck		= <2>;
-	tMRD-min-tck		= <5>;
-
-	timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
-		compatible	= "jedec,lpddr3-timings";
-		/* workaround: 'reg' shows max-freq */
-		reg		= <800000000>;
-		min-freq	= <100000000>;
-		tRFC		= <65000>;
-		tRRD		= <6000>;
-		tRPab		= <12000>;
-		tRPpb		= <12000>;
-		tRCD		= <10000>;
-		tRC		= <33750>;
-		tRAS		= <23000>;
-		tWTR		= <3750>;
-		tWR		= <7500>;
-		tRTP		= <3750>;
-		tW2W-C2C	= <0>;
-		tR2R-C2C	= <0>;
-		tFAW		= <25000>;
-		tXSR		= <70000>;
-		tXP		= <3750>;
-		tCKE		= <3750>;
-		tCKESR		= <3750>;
-		tMRD		= <7000>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
index c6e44f47ce7c..1578514ec58d 100644
--- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
@@ -38,50 +38,16 @@ properties:
 patternProperties:
   "^.*@[0-3],[a-f0-9]+$":
     type: object
-    description:
-      The actual device nodes should be added as subnodes to the SROMc node.
-      These subnodes, in addition to regular device specification, should
-      contain the following properties, describing configuration
-      of the relevant SROM bank.
+    $ref: mc-peripheral-props.yaml#
+    additionalProperties: true
 
     properties:
-      reg:
-        description:
-          Bank number, base address (relative to start of the bank) and size
-          of the memory mapped for the device. Note that base address will be
-          typically 0 as this is the start of the bank.
-        maxItems: 1
-
       reg-io-width:
         enum: [1, 2]
         description:
           Data width in bytes (1 or 2). If omitted, default of 1 is used.
 
-      samsung,srom-page-mode:
-        description:
-          If page mode is set, 4 data page mode will be configured,
-          else normal (1 data) page mode will be set.
-        type: boolean
-
-      samsung,srom-timing:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        items:
-          minItems: 6
-          maxItems: 6
-        description: |
-          Array of 6 integers, specifying bank timings in the following order:
-          Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
-          Each value is specified in cycles and has the following meaning
-          and valid range:
-          Tacp: Page mode access cycle at Page mode (0 - 15)
-          Tcah: Address holding time after CSn (0 - 15)
-          Tcoh: Chip selection hold on OEn (0 - 15)
-          Tacc: Access cycle (0 - 31, the actual time is N + 1)
-          Tcos: Chip selection set-up before OEn (0 - 15)
-          Tacs: Address set-up before CSn (0 - 15)
-
     required:
-      - reg
       - samsung,srom-timing
 
 required:
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
index af5147f9da72..e0786153eec7 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
@@ -25,12 +25,6 @@ properties:
           - const: fsl,qoriq-memory-controller
       - enum:
           - fsl,bsc9132-memory-controller
-          - fsl,8540-memory-controller
-          - fsl,8541-memory-controller
-          - fsl,8544-memory-controller
-          - fsl,8548-memory-controller
-          - fsl,8555-memory-controller
-          - fsl,8568-memory-controller
           - fsl,mpc8536-memory-controller
           - fsl,mpc8540-memory-controller
           - fsl,mpc8541-memory-controller
@@ -46,6 +40,7 @@ properties:
           - fsl,p1021-memory-controller
           - fsl,p2020-memory-controller
           - fsl,qoriq-memory-controller
+          - nxp,imx9-memory-controller
 
   interrupts:
     maxItems: 1
@@ -57,13 +52,41 @@ properties:
     type: boolean
 
   reg:
-    maxItems: 1
+    items:
+      - description: Controller register space
+      - description: Inject register space
+    minItems: 1
+
+  reg-names:
+    items:
+      - const: ctrl
+      - const: inject
+    minItems: 1
 
 required:
   - compatible
   - interrupts
   - reg
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,imx9-memory-controller
+    then:
+      properties:
+        reg:
+          minItems: 2
+        reg-names:
+          minItems: 2
+    else:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml
new file mode 100644
index 000000000000..f7cf0f91c1c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSL/NXP Integrated Flash Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  NXP's integrated flash controller (IFC) is an advanced version of the
+  enhanced local bus controller which includes similar programming and signal
+  interfaces with an extended feature set. The IFC provides access to multiple
+  external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM,
+  SRAM and other memories where address and data are shared on a bus.
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    const: fsl,ifc
+
+  "#address-cells":
+    enum: [2, 3]
+    description: |
+      Should be either two or three.  The first cell is the chipselect
+      number, and the remaining cells are the offset into the chipselect.
+
+  "#size-cells":
+    enum: [1, 2]
+    description: |
+      Either one or two, depending on how large each chipselect can be.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      IFC may have one or two interrupts.  If two interrupt specifiers are
+      present, the first is the "common" interrupt (CM_EVTER_STAT), and the
+      second is the NAND interrupt (NAND_EVTER_STAT).  If there is only one,
+      that interrupt reports both types of event.
+
+  little-endian:
+    type: boolean
+    description: |
+      If this property is absent, the big-endian mode will be in use as default
+      for registers.
+
+  ranges:
+    description: |
+      Each range corresponds to a single chipselect, and covers the entire
+      access window as configured.
+
+patternProperties:
+  "^nand@[a-f0-9]+(,[a-f0-9]+)+$":
+    type: object
+    properties:
+      compatible:
+        const: fsl,ifc-nand
+
+      reg:
+        maxItems: 1
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 1
+
+    patternProperties:
+      "^partition@[0-9a-f]+":
+        $ref: /schemas/mtd/partitions/partition.yaml#
+        deprecated: true
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+  "(flash|fpga|board-control|cpld)@[a-f0-9]+(,[a-f0-9]+)+$":
+    type: object
+    oneOf:
+      - $ref: /schemas/board/fsl,fpga-qixis.yaml#
+      - $ref: /schemas/mtd/mtd-physmap.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        memory-controller@ffe1e000 {
+            compatible = "fsl,ifc";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            reg = <0x0 0xffe1e000 0 0x2000>;
+            interrupts = <16 2 19 2>;
+            little-endian;
+
+            /* NOR, NAND Flashes and CPLD on board */
+            ranges = <0x0 0x0 0x0 0xee000000 0x02000000>,
+                     <0x1 0x0 0x0 0xffa00000 0x00010000>,
+                     <0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+            flash@0,0 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "cfi-flash";
+                reg = <0x0 0x0 0x2000000>;
+                bank-width = <2>;
+                device-width = <1>;
+
+                partition@0 {
+                    /* 32MB for user data */
+                    reg = <0x0 0x02000000>;
+                    label = "NOR Data";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml
new file mode 100644
index 000000000000..82fc5f4a1ed6
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim-peripherals.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX WEIM Bus Peripheral Nodes
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+  This binding is meant for the child nodes of the WEIM node. The node
+  represents any device connected to the WEIM bus. It may be a Flash chip,
+  RAM chip or Ethernet controller, etc. These properties are meant for
+  configuring the WEIM settings/timings and will accompany the bindings
+  supported by the respective device.
+
+properties:
+  reg: true
+
+  fsl,weim-cs-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Timing values for the child node.
+    minItems: 2
+    maxItems: 6
+
+# the WEIM child will have its own native properties
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim.yaml
new file mode 100644
index 000000000000..ce4ec94a561c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,imx-weim.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX Wireless External Interface Module (WEIM)
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description:
+  The term "wireless" does not imply that the WEIM is literally an interface
+  without wires. It simply means that this module was originally designed for
+  wireless and mobile applications that use low-power technology. The actual
+  devices are instantiated from the child nodes of a WEIM node.
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-weim
+          - fsl,imx27-weim
+          - fsl,imx50-weim
+          - fsl,imx51-weim
+          - fsl,imx6q-weim
+      - items:
+          - enum:
+              - fsl,imx31-weim
+              - fsl,imx35-weim
+          - const: fsl,imx27-weim
+      - items:
+          - enum:
+              - fsl,imx6sx-weim
+              - fsl,imx6ul-weim
+          - const: fsl,imx6q-weim
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ranges: true
+
+  fsl,weim-cs-gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the system General Purpose Register controller that contains
+      WEIM CS GPR register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0]
+      should be set up as one of the following 4 possible values depending on
+      the CS space configuration.
+
+      IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
+      ---------------------------------------------
+              05          128M     0M     0M     0M
+              033          64M    64M     0M     0M
+              0113         64M    32M    32M     0M
+              01111        32M    32M    32M    32M
+
+      In case that the property is absent, the reset value or what bootloader
+      sets up in IOMUXC_GPR1[11:0] will be used.
+
+  fsl,burst-clk-enable:
+    type: boolean
+    description:
+      The presence of this property indicates that the weim bus should operate
+      in Burst Clock Mode.
+
+  fsl,continuous-burst-clk:
+    type: boolean
+    description:
+      Make Burst Clock to output continuous clock. Without this option Burst
+      Clock will output clock only when necessary.
+
+patternProperties:
+  "^.*@[0-7],[0-9a-f]+$":
+    type: object
+    description: Devices attached to chip selects are represented as subnodes.
+    $ref: fsl,imx-weim-peripherals.yaml
+    additionalProperties: true
+    required:
+      - fsl,weim-cs-timing
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx50-weim
+                - fsl,imx6q-weim
+    then:
+      properties:
+        fsl,weim-cs-gpr: false
+        fsl,burst-clk-enable: false
+  - if:
+      not:
+        required:
+          - fsl,burst-clk-enable
+    then:
+      properties:
+        fsl,continuous-burst-clk: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx1-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                - description: CSxU
+                - description: CSxL
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx27-weim
+              - fsl,imx31-weim
+              - fsl,imx35-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                - description: CSCRxU
+                - description: CSCRxL
+                - description: CSCRxA
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx50-weim
+              - fsl,imx51-weim
+              - fsl,imx6q-weim
+              - fsl,imx6sx-weim
+              - fsl,imx6ul-weim
+    then:
+      patternProperties:
+        "^.*@[0-7],[0-9a-f]+$":
+          properties:
+            fsl,weim-cs-timing:
+              items:
+                - description: CSxGCR1
+                - description: CSxGCR2
+                - description: CSxRCR1
+                - description: CSxRCR2
+                - description: CSxWCR1
+                - description: CSxWCR2
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@21b8000 {
+        compatible = "fsl,imx6q-weim";
+        reg = <0x021b8000 0x4000>;
+        clocks = <&clks 196>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0 0x08000000 0x08000000>;
+        fsl,weim-cs-gpr = <&gpr>;
+
+        flash@0,0 {
+            compatible = "cfi-flash";
+            reg = <0 0 0x02000000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            bank-width = <2>;
+            fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+                                  0x0000c000 0x1404a38e 0x00000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
deleted file mode 100644
index 89427b018ba7..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Integrated Flash Controller
-
-Properties:
-- name : Should be ifc
-- compatible : should contain "fsl,ifc". The version of the integrated
-               flash controller can be found in the IFC_REV register at
-               offset zero.
-
-- #address-cells : Should be either two or three.  The first cell is the
-                   chipselect number, and the remaining cells are the
-                   offset into the chipselect.
-- #size-cells : Either one or two, depending on how large each chipselect
-                can be.
-- reg : Offset and length of the register set for the device
-- interrupts: IFC may have one or two interrupts.  If two interrupt
-              specifiers are present, the first is the "common"
-              interrupt (CM_EVTER_STAT), and the second is the NAND
-              interrupt (NAND_EVTER_STAT).  If there is only one,
-              that interrupt reports both types of event.
-
-- little-endian : If this property is absent, the big-endian mode will
-                  be in use as default for registers.
-
-- ranges : Each range corresponds to a single chipselect, and covers
-           the entire access window as configured.
-
-Child device nodes describe the devices connected to IFC such as NOR (e.g.
-cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
-like FPGAs, CPLDs, etc.
-
-Example:
-
-	ifc@ffe1e000 {
-		compatible = "fsl,ifc", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x0 0xffe1e000 0 0x2000>;
-		interrupts = <16 2 19 2>;
-		little-endian;
-
-		/* NOR, NAND Flashes and CPLD on board */
-		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
-			  0x1 0x0 0x0 0xffa00000 0x00010000
-			  0x3 0x0 0x0 0xffb00000 0x00020000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				/* 32MB for user data */
-				reg = <0x0 0x02000000>;
-				label = "NOR Data";
-			};
-		};
-
-		flash@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x1 0x0 0x10000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND U-Boot Image";
-				read-only;
-			};
-		};
-
-		cpld@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1010rdb-cpld";
-			reg = <0x3 0x0 0x000001f>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
index 445e46feda69..519b123116dc 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: i.MX8M DDR Controller
 
 maintainers:
-  - Leonard Crestez <leonard.crestez@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
 
 description:
   The DDRC block is integrated in i.MX8M for interfacing with DDR based
@@ -47,7 +47,8 @@ properties:
       - const: apb
 
   operating-points-v2: true
-  opp-table: true
+  opp-table:
+    type: object
 
 required:
   - reg
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
index 71547eee9919..5447f1dddedf 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/mmdc.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale Multi Mode DDR controller (MMDC)
 
 maintainers:
-  - Anson Huang <Anson.Huang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Fabio Estevam <festevam@gmail.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml
new file mode 100644
index 000000000000..89ebe3979012
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc-peripherals.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND / External Memory Controller (NEMC)
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  reg:
+    minItems: 1
+    maxItems: 255
+
+  ingenic,nemc-bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    description: Specifies the bus width in bits.
+
+  ingenic,nemc-tAS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address setup time in nanoseconds.
+
+  ingenic,nemc-tAH:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address hold time in nanoseconds.
+
+  ingenic,nemc-tBP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Burst pitch time in nanoseconds.
+
+  ingenic,nemc-tAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address wait time in nanoseconds.
+
+  ingenic,nemc-tSTRV:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Static memory recovery time in nanoseconds.
+
+required:
+  - reg
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
index 24f9e1982028..ee74a362f4ca 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings
+title: Ingenic SoCs NAND / External Memory Controller (NEMC)
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
@@ -39,38 +39,8 @@ properties:
 patternProperties:
   ".*@[0-9]+$":
     type: object
-    properties:
-      reg:
-        minItems: 1
-        maxItems: 255
-
-      ingenic,nemc-bus-width:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [8, 16]
-        description: Specifies the bus width in bits.
-
-      ingenic,nemc-tAS:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Address setup time in nanoseconds.
-
-      ingenic,nemc-tAH:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Address hold time in nanoseconds.
-
-      ingenic,nemc-tBP:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Burst pitch time in nanoseconds.
-
-      ingenic,nemc-tAW:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Address wait time in nanoseconds.
-
-      ingenic,nemc-tSTRV:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Static memory recovery time in nanoseconds.
-
-    required:
-      - reg
+    $ref: mc-peripheral-props.yaml#
+    additionalProperties: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml
new file mode 100644
index 000000000000..3049d6bb0b1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx Expansion Bus Controller
+
+description: |
+  The IXP4xx expansion bus controller handles access to devices on the
+  memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+  including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    pattern: '^bus@[0-9a-f]+$'
+
+  compatible:
+    items:
+      - enum:
+          - intel,ixp42x-expansion-bus-controller
+          - intel,ixp43x-expansion-bus-controller
+          - intel,ixp45x-expansion-bus-controller
+          - intel,ixp46x-expansion-bus-controller
+      - const: syscon
+
+  reg:
+    description: Control registers for the expansion bus, these are not
+      inside the memory range handled by the expansion bus.
+    maxItems: 1
+
+  native-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The IXP4xx has a peculiar MMIO access scheme, as it changes
+      the access pattern for words (swizzling) on the bus depending on whether
+      the SoC is running in big-endian or little-endian mode. Thus the
+      registers must always be accessed using native endianness.
+
+  "#address-cells":
+    description: |
+      The first cell is the chip select number.
+      The second cell is the address offset within the bank.
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+  dma-ranges: true
+
+patternProperties:
+  "^.*@[0-7],[0-9a-f]+$":
+    description: Devices attached to chip selects are represented as
+      subnodes.
+    type: object
+    $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+    additionalProperties: true
+
+required:
+  - compatible
+  - reg
+  - native-endian
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - dma-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    bus@50000000 {
+        compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+        reg = <0xc4000000 0x28>;
+        native-endian;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0x0 0x50000000 0x01000000>,
+                 <1 0x0 0x51000000 0x01000000>;
+        dma-ranges = <0 0x0 0x50000000 0x01000000>,
+                     <1 0x0 0x51000000 0x01000000>;
+        flash@0,0 {
+            compatible = "intel,ixp4xx-flash", "cfi-flash";
+            bank-width = <2>;
+            reg = <0 0x00000000 0x1000000>;
+            intel,ixp4xx-eb-t3 = <3>;
+            intel,ixp4xx-eb-cycle-type = <0>;
+            intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+            intel,ixp4xx-eb-write-enable = <1>;
+            intel,ixp4xx-eb-byte-access = <0>;
+        };
+        serial@1,0 {
+            compatible = "exar,xr16l2551", "ns8250";
+            reg = <1 0x00000000 0x10>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            clock-frequency = <1843200>;
+            intel,ixp4xx-eb-t3 = <3>;
+            intel,ixp4xx-eb-cycle-type = <1>;
+            intel,ixp4xx-eb-write-enable = <1>;
+            intel,ixp4xx-eb-byte-access = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
new file mode 100644
index 000000000000..d1479a7b9c8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for Intel IXP4xx Expansion Bus
+
+description:
+  The IXP4xx expansion bus controller handles access to devices on the
+  memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+  including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  intel,ixp4xx-eb-t1:
+    description: Address timing, extend address phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t2:
+    description: Setup chip select timing, extend setup phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t3:
+    description: Strobe timing, extend strobe phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  intel,ixp4xx-eb-t4:
+    description: Hold timing, extend hold phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t5:
+    description: Recovery timing, extend recovery phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  intel,ixp4xx-eb-cycle-type:
+    description: The type of cycles to use on the expansion bus for this
+      chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  intel,ixp4xx-eb-byte-access-on-halfword:
+    description: Allow byte read access on half word devices.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-hpi-hrdy-pol-high:
+    description: Set HPI HRDY polarity to active high when using HPI.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-mux-address-and-data:
+    description: Multiplex address and data on the data bus.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-ahb-split-transfers:
+    description: Enable AHB split transfers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-write-enable:
+    description: Enable write cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-byte-access:
+    description: Expansion bus uses only 8 bits. The default is to use
+      16 bits.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
index 14a6bc8f421f..9249624c4fa0 100644
--- a/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
@@ -8,7 +8,7 @@ title: Marvell MVEBU SDRAM controller
 
 maintainers:
   - Jan Luebbe <jlu@pengutronix.de>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
new file mode 100644
index 000000000000..73a6dac946b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mc-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for a Memory Controller bus.
+
+description:
+  Many Memory Controllers need to add properties to peripheral devices.
+  They could be common properties like reg or they could be controller
+  specific like delay in clock or data lines, etc. These properties need
+  to be defined in the peripheral node because they are per-peripheral
+  and there can be multiple peripherals attached to a controller. All
+  those properties are listed here. The controller specific properties
+  should go in their own separate schema that should be referenced
+  from here.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  reg:
+    description: Bank number, base address and size of the device.
+
+  bank-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Bank width of the device, in bytes.
+    enum: [1, 2, 4]
+
+required:
+  - reg
+
+# The controller specific properties go here.
+allOf:
+  - $ref: st,stm32-fmc2-ebi-props.yaml#
+  - $ref: ingenic,nemc-peripherals.yaml#
+  - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
+  - $ref: qcom,ebi2-peripheral-props.yaml#
+  - $ref: samsung,exynos4210-srom-peripheral-props.yaml#
+  - $ref: ti,gpmc-child.yaml#
+  - $ref: fsl/fsl,imx-weim-peripherals.yaml
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
index 85e02854f083..6ccdaf99c778 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: mediatek,mt7621-memc
+    items:
+      - const: mediatek,mt7621-memc
+      - const: syscon
 
   reg:
     maxItems: 1
@@ -25,6 +27,6 @@ additionalProperties: false
 examples:
   - |
     memory-controller@5000 {
-        compatible = "mediatek,mt7621-memc";
+        compatible = "mediatek,mt7621-memc", "syscon";
         reg = <0x5000 0x1000>;
     };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index 3a82b0b27fa0..0762e0ff66ef 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -16,7 +16,7 @@ description: |
   MediaTek SMI have two generations of HW architecture, here is the list
   which generation the SoCs use:
   generation 1: mt2701 and mt7623.
-  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8192 and mt8195.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8188, mt8192 and mt8195.
 
   There's slight differences between the two SMI, for generation 2, the
   register which control the iommu port is at each larb's register base. But
@@ -32,13 +32,19 @@ properties:
           - mediatek,mt2701-smi-common
           - mediatek,mt2712-smi-common
           - mediatek,mt6779-smi-common
+          - mediatek,mt6795-smi-common
+          - mediatek,mt6893-smi-common
           - mediatek,mt8167-smi-common
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
+          - mediatek,mt8186-smi-common
+          - mediatek,mt8188-smi-common-vdo
+          - mediatek,mt8188-smi-common-vpp
           - mediatek,mt8192-smi-common
           - mediatek,mt8195-smi-common-vdo
           - mediatek,mt8195-smi-common-vpp
           - mediatek,mt8195-smi-sub-common
+          - mediatek,mt8365-smi-common
 
       - description: for mt7623
         items:
@@ -88,10 +94,9 @@ allOf:
               - mediatek,mt2701-smi-common
     then:
       properties:
-        clock:
-          items:
-            minItems: 3
-            maxItems: 3
+        clocks:
+          minItems: 3
+          maxItems: 3
         clock-names:
           items:
             - const: apb
@@ -108,10 +113,9 @@ allOf:
       required:
         - mediatek,smi
       properties:
-        clock:
-          items:
-            minItems: 3
-            maxItems: 3
+        clocks:
+          minItems: 3
+          maxItems: 3
         clock-names:
           items:
             - const: apb
@@ -127,16 +131,17 @@ allOf:
           enum:
             - mediatek,mt6779-smi-common
             - mediatek,mt8183-smi-common
+            - mediatek,mt8186-smi-common
             - mediatek,mt8192-smi-common
             - mediatek,mt8195-smi-common-vdo
             - mediatek,mt8195-smi-common-vpp
+            - mediatek,mt8365-smi-common
 
     then:
       properties:
-        clock:
-          items:
-            minItems: 4
-            maxItems: 4
+        clocks:
+          minItems: 4
+          maxItems: 4
         clock-names:
           items:
             - const: apb
@@ -144,12 +149,20 @@ allOf:
             - const: gals0
             - const: gals1
 
-    else:  # for gen2 HW that don't have gals
+  - if:  # for gen2 HW that don't have gals
       properties:
-        clock:
-          items:
-            minItems: 2
-            maxItems: 2
+        compatible:
+          enum:
+            - mediatek,mt2712-smi-common
+            - mediatek,mt6795-smi-common
+            - mediatek,mt8167-smi-common
+            - mediatek,mt8173-smi-common
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: apb
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index eaeff1ada7f8..2e7fac4b5094 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -20,9 +20,13 @@ properties:
           - mediatek,mt2701-smi-larb
           - mediatek,mt2712-smi-larb
           - mediatek,mt6779-smi-larb
+          - mediatek,mt6795-smi-larb
+          - mediatek,mt6893-smi-larb
           - mediatek,mt8167-smi-larb
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
+          - mediatek,mt8186-smi-larb
+          - mediatek,mt8188-smi-larb
           - mediatek,mt8192-smi-larb
           - mediatek,mt8195-smi-larb
 
@@ -31,6 +35,10 @@ properties:
           - const: mediatek,mt7623-smi-larb
           - const: mediatek,mt2701-smi-larb
 
+      - items:
+          - const: mediatek,mt8365-smi-larb
+          - const: mediatek,mt8186-smi-larb
+
   reg:
     maxItems: 1
 
@@ -52,7 +60,7 @@ properties:
     maxItems: 1
 
   mediatek,smi:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: a phandle to the smi_common node.
 
   mediatek,larb-id:
@@ -60,7 +68,7 @@ properties:
     minimum: 0
     maximum: 31
     description: the hardware id of this larb. It's only required when this
-      hardward id is not consecutive from its M4U point of view.
+      hardware id is not consecutive from its M4U point of view.
 
 required:
   - compatible
@@ -75,15 +83,17 @@ allOf:
         compatible:
           enum:
             - mediatek,mt8183-smi-larb
+            - mediatek,mt8186-smi-larb
+            - mediatek,mt8188-smi-larb
             - mediatek,mt8195-smi-larb
 
     then:
       properties:
-        clock:
-          items:
-            minItems: 3
-            maxItems: 3
+        clocks:
+          minItems: 2
+          maxItems: 3
         clock-names:
+          minItems: 2
           items:
             - const: apb
             - const: smi
@@ -91,10 +101,9 @@ allOf:
 
     else:
       properties:
-        clock:
-          items:
-            minItems: 2
-            maxItems: 2
+        clocks:
+          minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: apb
@@ -108,7 +117,8 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
-              - mediatek,mt8167-smi-larb
+              - mediatek,mt8186-smi-larb
+              - mediatek,mt8188-smi-larb
               - mediatek,mt8192-smi-larb
               - mediatek,mt8195-smi-larb
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml
new file mode 100644
index 000000000000..ac1a5a17749d
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/nuvoton,npcm-memory-controller.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/nuvoton,npcm-memory-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM Memory Controller
+
+maintainers:
+  - Marvin Lin <kflin@nuvoton.com>
+  - Stanley Chu <yschu@nuvoton.com>
+
+description: |
+  The Nuvoton BMC SoC supports DDR4 memory with or without ECC (error correction
+  check).
+
+  The memory controller supports single bit error correction, double bit error
+  detection (in-line ECC in which a section (1/8th) of the memory device used to
+  store data is used for ECC storage).
+
+  Note, the bootloader must configure ECC mode for the memory controller.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm750-memory-controller
+      - nuvoton,npcm845-memory-controller
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mc: memory-controller@f0824000 {
+        compatible = "nuvoton,npcm750-memory-controller";
+        reg = <0xf0824000 0x1000>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
index 9163c3f12a85..f5f03bf36413 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
@@ -50,6 +50,7 @@ properties:
 patternProperties:
   "^emc-timings-[0-9]+$":
     type: object
+    additionalProperties: false
     properties:
       nvidia,ram-code:
         $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
index 611bda38d187..b901f1b3e0fc 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -31,12 +31,24 @@ properties:
       - enum:
           - nvidia,tegra186-mc
           - nvidia,tegra194-mc
+          - nvidia,tegra234-mc
+          - nvidia,tegra264-mc
 
   reg:
-    maxItems: 1
+    minItems: 6
+    maxItems: 18
+
+  reg-names:
+    minItems: 6
+    maxItems: 18
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
 
   "#address-cells":
     const: 2
@@ -48,6 +60,9 @@ properties:
 
   dma-ranges: true
 
+  "#interconnect-cells":
+    const: 1
+
 patternProperties:
   "^external-memory-controller@[0-9a-f]+$":
     description:
@@ -63,12 +78,16 @@ patternProperties:
           - enum:
               - nvidia,tegra186-emc
               - nvidia,tegra194-emc
+              - nvidia,tegra234-emc
+              - nvidia,tegra264-emc
 
       reg:
-        maxItems: 1
+        minItems: 1
+        maxItems: 2
 
       interrupts:
-        maxItems: 1
+        items:
+          - description: EMC general interrupt
 
       clocks:
         items:
@@ -78,20 +97,219 @@ patternProperties:
         items:
           - const: emc
 
+      "#interconnect-cells":
+        const: 0
+
       nvidia,bpmp:
         $ref: /schemas/types.yaml#/definitions/phandle
         description:
           phandle of the node representing the BPMP
 
+    allOf:
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra186-emc
+        then:
+          properties:
+            reg:
+              maxItems: 1
+
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra194-emc
+        then:
+          properties:
+            reg:
+              minItems: 2
+
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra234-emc
+        then:
+          properties:
+            reg:
+              minItems: 2
+
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra264-emc
+        then:
+          properties:
+            reg:
+              minItems: 2
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - clocks
+      - clock-names
+      - "#interconnect-cells"
+      - nvidia,bpmp
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra186-mc
+    then:
+      properties:
+        reg:
+          maxItems: 6
+          description: 5 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+
+        interrupts:
+          items:
+            - description: MC general interrupt
+
+        interrupt-names: false
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra194-mc
+    then:
+      properties:
+        reg:
+          minItems: 18
+          description: 17 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+            - const: ch4
+            - const: ch5
+            - const: ch6
+            - const: ch7
+            - const: ch8
+            - const: ch9
+            - const: ch10
+            - const: ch11
+            - const: ch12
+            - const: ch13
+            - const: ch14
+            - const: ch15
+
+        interrupts:
+          items:
+            - description: MC general interrupt
+
+        interrupt-names: false
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra234-mc
+    then:
+      properties:
+        reg:
+          minItems: 18
+          description: 17 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+            - const: ch4
+            - const: ch5
+            - const: ch6
+            - const: ch7
+            - const: ch8
+            - const: ch9
+            - const: ch10
+            - const: ch11
+            - const: ch12
+            - const: ch13
+            - const: ch14
+            - const: ch15
+
+        interrupts:
+          items:
+            - description: MC general interrupt
+
+        interrupt-names: false
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra264-mc
+    then:
+      properties:
+        reg:
+          minItems: 17
+          maxItems: 17
+          description: 17 memory controller channels
+
+        reg-names:
+          items:
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+            - const: ch4
+            - const: ch5
+            - const: ch6
+            - const: ch7
+            - const: ch8
+            - const: ch9
+            - const: ch10
+            - const: ch11
+            - const: ch12
+            - const: ch13
+            - const: ch14
+            - const: ch15
+
+        interrupts:
+          minItems: 8
+          maxItems: 8
+          description: One interrupt line for each MC component
+
+        interrupt-names:
+          items:
+            - const: mcf
+            - const: hub1
+            - const: hub2
+            - const: hub3
+            - const: hub4
+            - const: hub5
+            - const: sbs
+            - const: channel
+
+additionalProperties: false
+
 required:
   - compatible
   - reg
+  - reg-names
   - interrupts
   - "#address-cells"
   - "#size-cells"
 
-additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/clock/tegra186-clock.h>
@@ -103,7 +321,13 @@ examples:
 
         memory-controller@2c00000 {
             compatible = "nvidia,tegra186-mc";
-            reg = <0x0 0x02c00000 0x0 0xb0000>;
+            reg = <0x0 0x02c00000 0x0 0x10000>,    /* MC-SID */
+                  <0x0 0x02c10000 0x0 0x10000>,    /* Broadcast channel */
+                  <0x0 0x02c20000 0x0 0x10000>,    /* MC0 */
+                  <0x0 0x02c30000 0x0 0x10000>,    /* MC1 */
+                  <0x0 0x02c40000 0x0 0x10000>,    /* MC2 */
+                  <0x0 0x02c50000 0x0 0x10000>;    /* MC3 */
+            reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3";
             interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 
             #address-cells = <2>;
@@ -124,12 +348,9 @@ examples:
                 clocks = <&bpmp TEGRA186_CLK_EMC>;
                 clock-names = "emc";
 
+                #interconnect-cells = <0>;
+
                 nvidia,bpmp = <&bpmp>;
             };
         };
     };
-
-    bpmp: bpmp {
-        compatible = "nvidia,tegra186-bpmp";
-        #clock-cells = <1>;
-    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
index 2fa44951cfde..71896cb10692 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -145,7 +145,7 @@ patternProperties:
   "^emc-table@[0-9]+$":
     $ref: "#/$defs/emc-table"
 
-  "^emc-tables@[a-z0-9-]+$":
+  "^emc-tables@[a-f0-9-]+$":
     type: object
     properties:
       reg:
@@ -165,7 +165,7 @@ patternProperties:
         const: 0
 
       lpddr2:
-        $ref: "ddr/jedec,lpddr2.yaml#"
+        $ref: ddr/jedec,lpddr2.yaml#
         type: object
 
     patternProperties:
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
index bc8477e7ab19..4e4fb4acd7f9 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
@@ -33,6 +33,9 @@ properties:
     items:
       - description: EMC general interrupt
 
+  "#interconnect-cells":
+    const: 0
+
   memory-region:
     maxItems: 1
     description:
@@ -44,6 +47,11 @@ properties:
     description:
       phandle of the memory controller node
 
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property, which
+      is a bitfield indicating SoC speedo ID mask.
+
 required:
   - compatible
   - reg
@@ -79,4 +87,7 @@ examples:
         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
         memory-region = <&emc_table>;
         nvidia,memory-controller = <&mc>;
+        operating-points-v2 = <&dvfs_opp_table>;
+
+        #interconnect-cells = <0>;
     };
diff --git a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
index 9566b3421f03..8b937f90a1fb 100644
--- a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Atheros AR7xxx/AR9xxx DDR controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The DDR controller of the AR7xxx and AR9xxx families provides an interface to
@@ -52,10 +52,3 @@ examples:
 
         #qca,ddr-wb-channel-cells = <1>;
     };
-
-    interrupt-controller {
-        // ...
-        qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
-        qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
-                              <&ddr_ctrl 0>, <&ddr_ctrl 1>;
-    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml
new file mode 100644
index 000000000000..aec88cd2df76
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/qcom,ebi2-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral Properties for Qualcomm External Bus Interface 2 (EBI2)
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  # SLOW chip selects
+  qcom,xmem-recovery-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The time the memory continues to drive the data bus after OE
+      is de-asserted, in order to avoid contention on the data bus.
+      They are inserted when reading one CS and switching to another
+      CS or read followed by write on the same CS. Minimum value is
+      actually 1, so a value of 0 will still yield 1 recovery cycle.
+    minimum: 0
+    maximum: 15
+
+  qcom,xmem-write-hold-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The extra cycles inserted after every write minimum 1. The
+      data out is driven from the time WE is asserted until CS is
+      asserted. With a hold of 1 (value = 0), the CS stays active
+      for 1 extra cycle, etc.
+    minimum: 0
+    maximum: 15
+
+  qcom,xmem-write-delta-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The initial latency for write cycles inserted for the first
+      write to a page or burst memory.
+    minimum: 0
+    maximum: 255
+
+  qcom,xmem-read-delta-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The initial latency for read cycles inserted for the first
+      read to a page or burst memory.
+    minimum: 0
+    maximum: 255
+
+  qcom,xmem-write-wait-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The number of wait cycles for every write access.
+    minimum: 0
+    maximum: 15
+
+  qcom,xmem-read-wait-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The number of wait cycles for every read access.
+    minimum: 0
+    maximum: 15
+
+  # FAST chip selects
+  qcom,xmem-address-hold-enable:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Holds the address for an extra cycle to meet hold time
+      requirements with ADV assertion, when set to 1.
+    enum: [ 0, 1 ]
+
+  qcom,xmem-adv-to-oe-recovery-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The number of cycles elapsed before an OE assertion, with
+      respect to the cycle where ADV (address valid) is asserted.
+    minimum: 0
+    maximum: 3
+
+  qcom,xmem-read-hold-cycles:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The length in cycles of the first segment of a read transfer.
+      For a single read transfer this will be the time from CS
+      assertion to OE assertion.
+    minimum: 0
+    maximum: 15
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2.yaml b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2.yaml
new file mode 100644
index 000000000000..423d7a75134f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/qcom,ebi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm External Bus Interface 2 (EBI2)
+
+description: |
+  The EBI2 contains two peripheral blocks: XMEM and LCDC. The XMEM handles any
+  external memory (such as NAND or other memory-mapped peripherals) whereas
+  LCDC handles LCD displays.
+
+  As it says it connects devices to an external bus interface, meaning address
+  lines (up to 9 address lines so can only address 1KiB external memory space),
+  data lines (16 bits), OE (output enable), ADV (address valid, used on some
+  NOR flash memories), WE (write enable). This on top of 6 different chip selects
+  (CS0 thru CS5) so that in theory 6 different devices can be connected.
+
+  Apparently this bus is clocked at 64MHz. It has dedicated pins on the package
+  and the bus can only come out on these pins, however if some of the pins are
+  unused they can be left unconnected or remuxed to be used as GPIO or in some
+  cases other orthogonal functions as well.
+
+  Also CS1 and CS2 has -A and -B signals. Why they have that is unclear to me.
+
+  The chip selects have the following memory range assignments. This region of
+  memory is referred to as "Chip Peripheral SS FPB0" and is 168MB big.
+
+  Chip Select                     Physical address base
+  CS0 GPIO134                     0x1a800000-0x1b000000 (8MB)
+  CS1 GPIO39 (A) / GPIO123 (B)    0x1b000000-0x1b800000 (8MB)
+  CS2 GPIO40 (A) / GPIO124 (B)    0x1b800000-0x1c000000 (8MB)
+  CS3 GPIO133                     0x1d000000-0x25000000 (128 MB)
+  CS4 GPIO132                     0x1c800000-0x1d000000 (8MB)
+  CS5 GPIO131                     0x1c000000-0x1c800000 (8MB)
+
+  The APQ8060 Qualcomm Application Processor User Guide, 80-N7150-14 Rev. A,
+  August 6, 2012 contains some incomplete documentation of the EBI2.
+
+  FIXME: the manual mentions "write precharge cycles" and "precharge cycles".
+  We have not been able to figure out which bit fields these correspond to
+  in the hardware, or what valid values exist. The current hypothesis is that
+  this is something just used on the FAST chip selects and that the SLOW
+  chip selects are understood fully. There is also a "byte device enable"
+  flag somewhere for 8bit memories.
+
+  FIXME: The chipselects have SLOW and FAST configuration registers. It's a bit
+  unclear what this means, if they are mutually exclusive or can be used
+  together, or if some chip selects are hardwired to be FAST and others are SLOW
+  by design.
+
+  The XMEM registers are totally undocumented but could be partially decoded
+  because the Cypress AN49576 Antioch Westbridge apparently has suspiciously
+  similar register layout, see: http://www.cypress.com/file/105771/download
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,apq8060-ebi2
+      - qcom,msm8660-ebi2
+
+  reg:
+    items:
+      - description: EBI2 config region
+      - description: XMEM config region
+
+  reg-names:
+    items:
+      - const: ebi2
+      - const: xmem
+
+  ranges: true
+
+  clocks:
+    items:
+      - description: EBI_2X clock
+      - description: EBI clock
+
+  clock-names:
+    items:
+      - const: ebi2x
+      - const: ebi2
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ranges
+  - clocks
+  - clock-names
+  - '#address-cells'
+  - '#size-cells'
+
+patternProperties:
+  "^.*@[0-5],[0-9a-f]+$":
+    type: object
+    $ref: mc-peripheral-props.yaml#
+    additionalProperties: true
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8660.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    external-bus@1a100000 {
+        compatible = "qcom,msm8660-ebi2";
+        reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
+        reg-names = "ebi2", "xmem";
+        ranges = <0 0x0 0x1a800000 0x00800000>,
+                 <1 0x0 0x1b000000 0x00800000>,
+                 <2 0x0 0x1b800000 0x00800000>,
+                 <3 0x0 0x1d000000 0x08000000>,
+                 <4 0x0 0x1c800000 0x00800000>,
+                 <5 0x0 0x1c000000 0x00800000>;
+
+        clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
+        clock-names = "ebi2x", "ebi2";
+
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        ethernet@2,0 {
+            compatible = "smsc,lan9221", "smsc,lan9115";
+            reg = <2 0x0 0x100>;
+
+            interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
+                                  <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
+
+            phy-mode = "mii";
+            reg-io-width = <2>;
+            smsc,force-external-phy;
+            smsc,irq-push-pull;
+
+            /* SLOW chipselect config */
+            qcom,xmem-recovery-cycles = <0>;
+            qcom,xmem-write-hold-cycles = <3>;
+            qcom,xmem-write-delta-cycles = <31>;
+            qcom,xmem-read-delta-cycles = <28>;
+            qcom,xmem-write-wait-cycles = <9>;
+            qcom,xmem-read-wait-cycles = <9>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
index 7056ccb7eb30..8e3822314b25 100644
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/memory-controllers/renesas,dbsc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/memory-controllers/renesas,dbsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas DDR Bus Controllers
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml
deleted file mode 100644
index 2b18cef99511..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml
+++ /dev/null
@@ -1,35 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/memory-controllers/renesas,h8300-bsc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: H8/300 bus controller
-
-maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
-  - Yoshinori Sato <ysato@users.sourceforge.jp>
-
-properties:
-  compatible:
-    items:
-      - enum:
-          - renesas,h8300h-bsc
-          - renesas,h8s-bsc
-      - const: renesas,h8300-bsc
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  - |
-    memory-controller@fee01e {
-        compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc";
-        reg = <0xfee01e 8>;
-    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
index 9da80e8f2444..4f4bc953e31a 100644
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -20,21 +20,40 @@ description: |
   - if it contains "cfi-flash", then HyperFlash is used.
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r8a774a1-rpc-if       # RZ/G2M
-          - renesas,r8a774b1-rpc-if       # RZ/G2N
-          - renesas,r8a774c0-rpc-if       # RZ/G2E
-          - renesas,r8a774e1-rpc-if       # RZ/G2H
-          - renesas,r8a77970-rpc-if       # R-Car V3M
-          - renesas,r8a77980-rpc-if       # R-Car V3H
-          - renesas,r8a77995-rpc-if       # R-Car D3
-          - renesas,r8a779a0-rpc-if       # R-Car V3U
-      - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 or RZ/G2 device
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-rpc-if       # RZ/G2M
+              - renesas,r8a774b1-rpc-if       # RZ/G2N
+              - renesas,r8a774c0-rpc-if       # RZ/G2E
+              - renesas,r8a774e1-rpc-if       # RZ/G2H
+              - renesas,r8a7795-rpc-if        # R-Car H3
+              - renesas,r8a7796-rpc-if        # R-Car M3-W
+              - renesas,r8a77961-rpc-if       # R-Car M3-W+
+              - renesas,r8a77965-rpc-if       # R-Car M3-N
+              - renesas,r8a77970-rpc-if       # R-Car V3M
+              - renesas,r8a77980-rpc-if       # R-Car V3H
+              - renesas,r8a77990-rpc-if       # R-Car E3
+              - renesas,r8a77995-rpc-if       # R-Car D3
+              - renesas,r8a779a0-rpc-if       # R-Car V3U
+          - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 or RZ/G2{E,H,M,N} device
+
+      - items:
+          - enum:
+              - renesas,r8a779g0-rpc-if       # R-Car V4H
+              - renesas,r8a779h0-rpc-if       # R-Car V4M
+          - const: renesas,rcar-gen4-rpc-if   # a generic R-Car gen4 device
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-rpc-if      # RZ/G2UL
+              - renesas,r9a07g044-rpc-if      # RZ/G2{L,LC}
+              - renesas,r9a07g054-rpc-if      # RZ/V2L
+          - const: renesas,rzg2l-rpc-if
 
   reg:
     items:
@@ -49,6 +68,10 @@ properties:
       - const: wbuf
 
   clocks:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
     maxItems: 1
 
   power-domains:
@@ -60,6 +83,8 @@ properties:
 patternProperties:
   "flash@[0-9a-f]+$":
     type: object
+    additionalProperties: true
+
     properties:
       compatible:
         contains:
@@ -67,8 +92,6 @@ patternProperties:
             - cfi-flash
             - jedec,spi-nor
 
-unevaluatedProperties: false
-
 required:
   - compatible
   - reg
@@ -79,6 +102,26 @@ required:
   - '#address-cells'
   - '#size-cells'
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rzg2l-rpc-if
+then:
+  properties:
+    clocks:
+      items:
+        - description: SPI Multi IO Register access clock (SPI_CLK2)
+        - description: SPI Multi IO Main clock (SPI_CLK).
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/renesas-cpg-mssr.h>
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rzg3e-xspi.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rzg3e-xspi.yaml
new file mode 100644
index 000000000000..7a84f5bb7284
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rzg3e-xspi.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/renesas,rzg3e-xspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Expanded Serial Peripheral Interface (xSPI)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  Renesas xSPI allows a SPI flash connected to the SoC to be accessed via
+  the memory-mapping or the manual command mode.
+
+  The flash chip itself should be represented by a subnode of the XSPI node.
+  The flash interface is selected based on the "compatible" property of this
+  subnode:
+  -  "jedec,spi-nor";
+
+allOf:
+  - $ref: /schemas/spi/spi-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: renesas,r9a09g047-xspi  # RZ/G3E
+
+      - items:
+          - enum:
+              - renesas,r9a09g056-xspi  # RZ/V2N
+              - renesas,r9a09g057-xspi  # RZ/V2H(P)
+          - const: renesas,r9a09g047-xspi
+
+  reg:
+    items:
+      - description: xSPI registers
+      - description: direct mapping area
+
+  reg-names:
+    items:
+      - const: regs
+      - const: dirmap
+
+  interrupts:
+    items:
+      - description: Interrupt pulse signal by factors excluding errors
+      - description: Interrupt pulse signal by error factors
+
+  interrupt-names:
+    items:
+      - const: pulse
+      - const: err_pulse
+
+  clocks:
+    items:
+      - description: AHB clock
+      - description: AXI clock
+      - description: SPI clock
+      - description: Double speed SPI clock
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: axi
+      - const: spi
+      - const: spix2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: Hardware reset
+      - description: AXI reset
+
+  reset-names:
+    items:
+      - const: hresetn
+      - const: aresetn
+
+  renesas,xspi-cs-addr-sys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the system controller (sys) that allows to configure
+      xSPI CS0 and CS1 addresses.
+
+patternProperties:
+  "flash@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: jedec,spi-nor
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/renesas,r9a09g047-cpg.h>
+
+    spi@11030000 {
+        compatible = "renesas,r9a09g047-xspi";
+        reg = <0x11030000 0x10000>, <0x20000000 0x10000000>;
+        reg-names = "regs", "dirmap";
+        interrupts = <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "pulse", "err_pulse";
+        clocks = <&cpg CPG_MOD 0x9f>, <&cpg CPG_MOD 0xa0>,
+                 <&cpg CPG_CORE 9>, <&cpg CPG_MOD 0xa1>;
+        clock-names = "ahb", "axi", "spi", "spix2";
+        power-domains = <&cpg>;
+        resets = <&cpg 0xa3>, <&cpg 0xa4>;
+        reset-names = "hresetn", "aresetn";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+          compatible = "jedec,spi-nor";
+          reg = <0>;
+          spi-max-frequency = <40000000>;
+          spi-tx-bus-width = <1>;
+          spi-rx-bus-width = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml
new file mode 100644
index 000000000000..1f58ee99be28
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml
@@ -0,0 +1,384 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# %YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/rockchip,rk3399-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3399 DMC (Dynamic Memory Controller) device
+
+maintainers:
+  - Brian Norris <briannorris@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3399-dmc
+
+  devfreq-events:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Node to get DDR loading. Refer to
+      Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dmc_clk
+
+  operating-points-v2: true
+
+  center-supply:
+    description:
+      DMC regulator supply.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "PMU general register files".
+
+  interrupts:
+    maxItems: 1
+    description:
+      The CPU interrupt number. It should be a DCF interrupt. When DDR DVFS
+      finishes, a DCF interrupt is triggered.
+
+  rockchip,ddr3_speed_bin:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the
+      DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3
+      datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3
+      being used.
+
+  rockchip,pd_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Configure the PD_IDLE value. Defines the power-down idle period in which
+      memories are placed into power-down mode if bus is idle for PD_IDLE DFI
+      clock cycles.
+      See also rockchip,pd-idle-ns.
+
+  rockchip,sr_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Configure the SR_IDLE value. Defines the self-refresh idle period in
+      which memories are placed into self-refresh mode if bus is idle for
+      SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock).
+      See also rockchip,sr-idle-ns.
+    default: 0
+
+  rockchip,sr_mc_gate_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the memory self-refresh and controller clock gating idle period.
+      Memories are placed into self-refresh mode and memory controller clock
+      arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock
+      cycles.
+      See also rockchip,sr-mc-gate-idle-ns.
+
+  rockchip,srpd_lite_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the self-refresh power down idle period in which memories are
+      placed into self-refresh power down mode if bus is idle for
+      srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4
+      only.
+      See also rockchip,srpd-lite-idle-ns.
+
+  rockchip,standby_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the standby idle period in which memories are placed into
+      self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
+      if bus is idle for standby_idle * DFI clock cycles.
+      See also rockchip,standby-idle-ns.
+
+  rockchip,dram_dll_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less
+      than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed.
+      Note: if DLL was bypassed, the odt will also stop working.
+
+  rockchip,phy_dll_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency
+      is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
+      Note: PHY DLL and PHY ODT are independent.
+
+  rockchip,auto_pd_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the auto PD disable frequency in MHz.
+
+  rockchip,ddr3_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is DDR3, this parameter defines the ODT disable
+      frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
+      the ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,ddr3_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 40
+
+  rockchip,ddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the DRAM side ODT
+      strength in ohms.
+    default: 120
+
+  rockchip,phy_ddr3_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the phy side CA line
+      (including command line, address line and clock line) drive strength.
+    default: 40
+
+  rockchip,phy_ddr3_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 40
+
+  rockchip,phy_ddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the PHY side ODT
+      strength.
+    default: 240
+
+  rockchip,lpddr3_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is LPDDR3, this parameter defines then ODT disable
+      frequency in Hz. When DDR frequency is less then ddr3_odt_dis_freq, the
+      ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,lpddr3_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 34
+
+  rockchip,lpddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT
+      strength in ohms.
+    default: 240
+
+  rockchip,phy_lpddr3_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the PHY side CA line
+      (including command line, address line and clock line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr3_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When dram type is LPDDR3, this parameter define the phy side odt
+      strength, default value is 240.
+
+  rockchip,lpddr4_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the ODT disable
+      frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
+      the ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,lpddr4_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 60
+
+  rockchip,lpddr4_dq_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
+      DQS/DQ line strength in ohms.
+    default: 40
+
+  rockchip,lpddr4_ca_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
+      CA line strength in ohms.
+    default: 40
+
+  rockchip,phy_lpddr4_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side CA line
+      (including command address line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr4_ck_cs_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side clock
+      line and CS line drive strength.
+    default: 80
+
+  rockchip,phy_lpddr4_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 80
+
+  rockchip,phy_lpddr4_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side ODT
+      strength.
+    default: 60
+
+  rockchip,pd-idle-ns:
+    description:
+      Configure the PD_IDLE value in nanoseconds. Defines the power-down idle
+      period in which memories are placed into power-down mode if bus is idle
+      for PD_IDLE nanoseconds.
+
+  rockchip,sr-idle-ns:
+    description:
+      Configure the SR_IDLE value in nanoseconds. Defines the self-refresh idle
+      period in which memories are placed into self-refresh mode if bus is idle
+      for SR_IDLE nanoseconds.
+    default: 0
+
+  rockchip,sr-mc-gate-idle-ns:
+    description:
+      Defines the memory self-refresh and controller clock gating idle period in nanoseconds.
+      Memories are placed into self-refresh mode and memory controller clock
+      arg gating started if bus is idle for sr_mc_gate_idle nanoseconds.
+
+  rockchip,srpd-lite-idle-ns:
+    description:
+      Defines the self-refresh power down idle period in which memories are
+      placed into self-refresh power down mode if bus is idle for
+      srpd_lite_idle nanoseconds. This parameter is for LPDDR4 only.
+
+  rockchip,standby-idle-ns:
+    description:
+      Defines the standby idle period in which memories are placed into
+      self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
+      if bus is idle for standby_idle nanoseconds.
+
+  rockchip,pd-idle-dis-freq-hz:
+    description:
+      Defines the power-down idle disable frequency in Hz. When the DDR
+      frequency is greater than pd-idle-dis-freq, power-down idle is disabled.
+      See also rockchip,pd-idle-ns.
+
+  rockchip,sr-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh idle disable frequency in Hz. When the DDR
+      frequency is greater than sr-idle-dis-freq, self-refresh idle is
+      disabled. See also rockchip,sr-idle-ns.
+
+  rockchip,sr-mc-gate-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh and memory-controller clock gating disable
+      frequency in Hz. When the DDR frequency is greater than
+      sr-mc-gate-idle-dis-freq, the clock will not be gated when idle. See also
+      rockchip,sr-mc-gate-idle-ns.
+
+  rockchip,srpd-lite-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh power down idle disable frequency in Hz. When
+      the DDR frequency is greater than srpd-lite-idle-dis-freq, memory will
+      not be placed into self-refresh power down mode when idle. See also
+      rockchip,srpd-lite-idle-ns.
+
+  rockchip,standby-idle-dis-freq-hz:
+    description:
+      Defines the standby idle disable frequency in Hz. When the DDR frequency
+      is greater than standby-idle-dis-freq, standby idle is disabled. See also
+      rockchip,standby-idle-ns.
+
+required:
+  - compatible
+  - devfreq-events
+  - clocks
+  - clock-names
+  - operating-points-v2
+  - center-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    memory-controller {
+      compatible = "rockchip,rk3399-dmc";
+      devfreq-events = <&dfi>;
+      rockchip,pmu = <&pmu>;
+      interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_DDRC>;
+      clock-names = "dmc_clk";
+      operating-points-v2 = <&dmc_opp_table>;
+      center-supply = <&ppvar_centerlogic>;
+      rockchip,pd-idle-ns = <160>;
+      rockchip,sr-idle-ns = <10240>;
+      rockchip,sr-mc-gate-idle-ns = <40960>;
+      rockchip,srpd-lite-idle-ns = <61440>;
+      rockchip,standby-idle-ns = <81920>;
+      rockchip,ddr3_odt_dis_freq = <333000000>;
+      rockchip,lpddr3_odt_dis_freq = <333000000>;
+      rockchip,lpddr4_odt_dis_freq = <333000000>;
+      rockchip,pd-idle-dis-freq-hz = <1000000000>;
+      rockchip,sr-idle-dis-freq-hz = <1000000000>;
+      rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
+      rockchip,srpd-lite-idle-dis-freq-hz = <0>;
+      rockchip,standby-idle-dis-freq-hz = <928000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml
new file mode 100644
index 000000000000..c474f90846e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/samsung,exynos4210-srom-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral Properties for Samsung Exynos SoC SROM Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  samsung,srom-page-mode:
+    description:
+      If page mode is set, 4 data page mode will be configured,
+      else normal (1 data) page mode will be set.
+    type: boolean
+
+  samsung,srom-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 6
+    maxItems: 6
+    description: |
+      Array of 6 integers, specifying bank timings in the following order:
+      Tacp, Tcah, Tcoh, Tacc, Tcos, Tacs.
+      Each value is specified in cycles and has the following meaning
+      and valid range:
+      Tacp: Page mode access cycle at Page mode (0 - 15)
+      Tcah: Address holding time after CSn (0 - 15)
+      Tcoh: Chip selection hold on OEn (0 - 15)
+      Tacc: Access cycle (0 - 31, the actual time is N + 1)
+      Tcos: Chip selection set-up before OEn (0 - 15)
+      Tacs: Address set-up before CSn (0 - 15)
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
index fe8639dcffab..783ac984d898 100644
--- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
@@ -9,7 +9,7 @@ title: |
   Controller device
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Lukasz Luba <lukasz.luba@arm.com>
 
 description: |
@@ -42,17 +42,18 @@ properties:
     maxItems: 8
 
   devfreq-events:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 16
+    items:
+      maxItems: 1
     description: phandles of the PPMU events used by the controller.
 
   device-handle:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       phandle of the connected DRAM memory device. For more information please
-      refer to documentation file:
-      Documentation/devicetree/bindings/memory-controllers/ddr/lpddr3.txt
+      refer to jedec,lpddr3.yaml.
 
   operating-points-v2: true
 
@@ -72,7 +73,7 @@ properties:
       - description: registers of DREX1
 
   samsung,syscon-clk:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Phandle of the clock register set used by the controller, these registers
       are used for enabling a 'pause' feature and are not exposed by clock
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml
new file mode 100644
index 000000000000..c0e47055f28c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,s5pv210-dmc.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/samsung,s5pv210-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5Pv210 SoC Dynamic Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  Dynamic Memory Controller interfaces external JEDEC DDR-type SDRAM.
+
+properties:
+  compatible:
+    const: samsung,s5pv210-dmc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@f0000000 {
+        compatible = "samsung,s5pv210-dmc";
+        reg = <0xf0000000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
new file mode 100644
index 000000000000..87ff9ee098f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/snps,dw-umctl2-ddrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Universal Multi-Protocol Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Michal Simek <michal.simek@amd.com>
+
+description: |
+  Synopsys DesignWare Enhanced uMCTL2 DDR Memory Controller is capable of
+  working with the memory devices supporting up to (LP)DDR4 protocol. It can
+  be equipped with SEC/DEC ECC feature if DRAM data bus width is either
+  16-bits or 32-bits or 64-bits wide.
+
+  For instance the ZynqMP DDR controller is based on the DW uMCTL2 v2.40a
+  controller. It has an optional SEC/DEC ECC support in 64- and 32-bits
+  bus width configurations.
+
+properties:
+  compatible:
+    oneOf:
+      - deprecated: true
+        description: Synopsys DW uMCTL2 DDR controller v3.80a
+        const: snps,ddrc-3.80a
+      - description: Synopsys DW uMCTL2 DDR controller
+        const: snps,dw-umctl2-ddrc
+      - description: Xilinx ZynqMP DDR controller v2.40a
+        const: xlnx,zynqmp-ddrc-2.40a
+
+  interrupts:
+    description:
+      DW uMCTL2 DDRC IP-core provides individual IRQ signal for each event":"
+      ECC Corrected Error, ECC Uncorrected Error, ECC Address Protection,
+      Scrubber-Done signal, DFI Parity/CRC Error. Some platforms may have the
+      signals merged before they reach the IRQ controller or have some of them
+      absent in case if the corresponding feature is unavailable/disabled.
+    minItems: 1
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 5
+    oneOf:
+      - description: Common ECC CE/UE/Scrubber/DFI Errors IRQ
+        items:
+          - const: ecc
+      - description: Individual ECC CE/UE/Scrubber/DFI Errors IRQs
+        items:
+          enum: [ ecc_ce, ecc_ue, ecc_ap, ecc_sbr, dfi_e ]
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      A standard set of the clock sources contains CSRs bus clock, AXI-ports
+      reference clock, DDRC core clock, Scrubber standalone clock
+      (synchronous to the DDRC clock).
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ pclk, aclk, core, sbr ]
+
+  resets:
+    description:
+      Each clock domain can have separate reset signal.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ prst, arst, core, sbr ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    memory-controller@fd070000 {
+      compatible = "xlnx,zynqmp-ddrc-2.40a";
+      reg = <0xfd070000 0x30000>;
+
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc";
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    memory-controller@3d400000 {
+      compatible = "snps,dw-umctl2-ddrc";
+      reg = <0x3d400000 0x400000>;
+
+      interrupts = <147 IRQ_TYPE_LEVEL_HIGH>, <148 IRQ_TYPE_LEVEL_HIGH>,
+                   <149 IRQ_TYPE_LEVEL_HIGH>, <150 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc_ce", "ecc_ue", "ecc_sbr", "dfi_e";
+
+      clocks = <&pclk>, <&aclk>, <&core_clk>, <&sbr_clk>;
+      clock-names = "pclk", "aclk", "core", "sbr";
+    };
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml
new file mode 100644
index 000000000000..475e4095068c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for ST FMC2 Controller
+
+maintainers:
+  - Christophe Kerello <christophe.kerello@foss.st.com>
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  st,fmc2-ebi-cs-transaction-type:
+    description: |
+      Select one of the transactions type supported
+      0: Asynchronous mode 1 SRAM/FRAM.
+      1: Asynchronous mode 1 PSRAM.
+      2: Asynchronous mode A SRAM/FRAM.
+      3: Asynchronous mode A PSRAM.
+      4: Asynchronous mode 2 NOR.
+      5: Asynchronous mode B NOR.
+      6: Asynchronous mode C NOR.
+      7: Asynchronous mode D NOR.
+      8: Synchronous read synchronous write PSRAM.
+      9: Synchronous read asynchronous write PSRAM.
+      10: Synchronous read synchronous write NOR.
+      11: Synchronous read asynchronous write NOR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 11
+
+  st,fmc2-ebi-cs-cclk-enable:
+    description: Continuous clock enable (first bank must be configured
+      in synchronous mode). The FMC_CLK is generated continuously
+      during asynchronous and synchronous access. By default, the
+      FMC_CLK is only generated during synchronous access.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-mux-enable:
+    description: Address/Data multiplexed on databus (valid only with
+      NOR and PSRAM transactions type). By default, Address/Data
+      are not multiplexed.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-buswidth:
+    description: Data bus width
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 16 ]
+    default: 16
+
+  st,fmc2-ebi-cs-waitpol-high:
+    description: Wait signal polarity (NWAIT signal active high).
+      By default, NWAIT is active low.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-waitcfg-enable:
+    description: The NWAIT signal indicates wheither the data from the
+      device are valid or if a wait state must be inserted when accessing
+      the device in synchronous mode. By default, the NWAIT signal is
+      active one data cycle before wait state.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-wait-enable:
+    description: The NWAIT signal is enabled (its level is taken into
+      account after the programmed latency period to insert wait states
+      if asserted). By default, the NWAIT signal is disabled.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-asyncwait-enable:
+    description: The NWAIT signal is taken into account during asynchronous
+      transactions. By default, the NWAIT signal is not taken into account
+      during asynchronous transactions.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-cpsize:
+    description: CRAM page size. The controller splits the burst access
+      when the memory page is reached. By default, no burst split when
+      crossing page boundary.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 128, 256, 512, 1024 ]
+    default: 0
+
+  st,fmc2-ebi-cs-byte-lane-setup-ns:
+    description: This property configures the byte lane setup timing
+      defined in nanoseconds from NBLx low to Chip Select NEx low.
+
+  st,fmc2-ebi-cs-address-setup-ns:
+    description: This property defines the duration of the address setup
+      phase in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-address-hold-ns:
+    description: This property defines the duration of the address hold
+      phase in nanoseconds used for asynchronous multiplexed read/write
+      transactions.
+
+  st,fmc2-ebi-cs-data-setup-ns:
+    description: This property defines the duration of the data setup phase
+      in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-bus-turnaround-ns:
+    description: This property defines the delay in nanoseconds between the
+      end of current read/write transaction and the next transaction.
+
+  st,fmc2-ebi-cs-data-hold-ns:
+    description: This property defines the duration of the data hold phase
+      in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-clk-period-ns:
+    description: This property defines the FMC_CLK output signal period in
+      nanoseconds.
+
+  st,fmc2-ebi-cs-data-latency-ns:
+    description: This property defines the data latency before reading or
+      writing the first data in nanoseconds.
+
+  st,fmc2-ebi-cs-write-address-setup-ns:
+    description: This property defines the duration of the address setup
+      phase in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-write-address-hold-ns:
+    description: This property defines the duration of the address hold
+      phase in nanoseconds used for asynchronous multiplexed write
+      transactions.
+
+  st,fmc2-ebi-cs-write-data-setup-ns:
+    description: This property defines the duration of the data setup
+      phase in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-write-bus-turnaround-ns:
+    description: This property defines the delay between the end of current
+      write transaction and the next transaction in nanoseconds.
+
+  st,fmc2-ebi-cs-write-data-hold-ns:
+    description: This property defines the duration of the data hold phase
+      in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-max-low-pulse-ns:
+    description: This property defines the maximum chip select low pulse
+      duration in nanoseconds for synchronous transactions. When this timing
+      reaches 0, the controller splits the current access, toggles NE to
+      allow device refresh and restarts a new access.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index 6b516d3895af..706e45eb4d27 100644
--- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
+title: STMicroelectronics Flexible Memory Controller 2 (FMC2)
 
 description: |
   The FMC2 functional block makes the interface with: synchronous and
@@ -23,7 +23,9 @@ maintainers:
 
 properties:
   compatible:
-    const: st,stm32mp1-fmc2-ebi
+    enum:
+      - st,stm32mp1-fmc2-ebi
+      - st,stm32mp25-fmc2-ebi
 
   reg:
     maxItems: 1
@@ -34,6 +36,9 @@ properties:
   resets:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
   "#address-cells":
     const: 2
 
@@ -45,146 +50,15 @@ properties:
       Reflects the memory layout with four integer values per bank. Format:
       <bank-number> 0 <address of the bank> <size>
 
+  access-controllers:
+    minItems: 1
+    maxItems: 2
+
 patternProperties:
   "^.*@[0-4],[a-f0-9]+$":
+    additionalProperties: true
     type: object
-
-    properties:
-      reg:
-        description: Bank number, base address and size of the device.
-
-      st,fmc2-ebi-cs-transaction-type:
-        description: |
-          Select one of the transactions type supported
-          0: Asynchronous mode 1 SRAM/FRAM.
-          1: Asynchronous mode 1 PSRAM.
-          2: Asynchronous mode A SRAM/FRAM.
-          3: Asynchronous mode A PSRAM.
-          4: Asynchronous mode 2 NOR.
-          5: Asynchronous mode B NOR.
-          6: Asynchronous mode C NOR.
-          7: Asynchronous mode D NOR.
-          8: Synchronous read synchronous write PSRAM.
-          9: Synchronous read asynchronous write PSRAM.
-          10: Synchronous read synchronous write NOR.
-          11: Synchronous read asynchronous write NOR.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0
-        maximum: 11
-
-      st,fmc2-ebi-cs-cclk-enable:
-        description: Continuous clock enable (first bank must be configured
-          in synchronous mode). The FMC_CLK is generated continuously
-          during asynchronous and synchronous access. By default, the
-          FMC_CLK is only generated during synchronous access.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-mux-enable:
-        description: Address/Data multiplexed on databus (valid only with
-          NOR and PSRAM transactions type). By default, Address/Data
-          are not multiplexed.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-buswidth:
-        description: Data bus width
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [ 8, 16 ]
-        default: 16
-
-      st,fmc2-ebi-cs-waitpol-high:
-        description: Wait signal polarity (NWAIT signal active high).
-          By default, NWAIT is active low.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-waitcfg-enable:
-        description: The NWAIT signal indicates wheither the data from the
-          device are valid or if a wait state must be inserted when accessing
-          the device in synchronous mode. By default, the NWAIT signal is
-          active one data cycle before wait state.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-wait-enable:
-        description: The NWAIT signal is enabled (its level is taken into
-          account after the programmed latency period to insert wait states
-          if asserted). By default, the NWAIT signal is disabled.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-asyncwait-enable:
-        description: The NWAIT signal is taken into account during asynchronous
-          transactions. By default, the NWAIT signal is not taken into account
-          during asynchronous transactions.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-cpsize:
-        description: CRAM page size. The controller splits the burst access
-          when the memory page is reached. By default, no burst split when
-          crossing page boundary.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [ 0, 128, 256, 512, 1024 ]
-        default: 0
-
-      st,fmc2-ebi-cs-byte-lane-setup-ns:
-        description: This property configures the byte lane setup timing
-          defined in nanoseconds from NBLx low to Chip Select NEx low.
-
-      st,fmc2-ebi-cs-address-setup-ns:
-        description: This property defines the duration of the address setup
-          phase in nanoseconds used for asynchronous read/write transactions.
-
-      st,fmc2-ebi-cs-address-hold-ns:
-        description: This property defines the duration of the address hold
-          phase in nanoseconds used for asynchronous multiplexed read/write
-          transactions.
-
-      st,fmc2-ebi-cs-data-setup-ns:
-        description: This property defines the duration of the data setup phase
-          in nanoseconds used for asynchronous read/write transactions.
-
-      st,fmc2-ebi-cs-bus-turnaround-ns:
-        description: This property defines the delay in nanoseconds between the
-          end of current read/write transaction and the next transaction.
-
-      st,fmc2-ebi-cs-data-hold-ns:
-        description: This property defines the duration of the data hold phase
-          in nanoseconds used for asynchronous read/write transactions.
-
-      st,fmc2-ebi-cs-clk-period-ns:
-        description: This property defines the FMC_CLK output signal period in
-          nanoseconds.
-
-      st,fmc2-ebi-cs-data-latency-ns:
-        description: This property defines the data latency before reading or
-          writing the first data in nanoseconds.
-
-      st,fmc2_ebi-cs-write-address-setup-ns:
-        description: This property defines the duration of the address setup
-          phase in nanoseconds used for asynchronous write transactions.
-
-      st,fmc2-ebi-cs-write-address-hold-ns:
-        description: This property defines the duration of the address hold
-          phase in nanoseconds used for asynchronous multiplexed write
-          transactions.
-
-      st,fmc2-ebi-cs-write-data-setup-ns:
-        description: This property defines the duration of the data setup
-          phase in nanoseconds used for asynchronous write transactions.
-
-      st,fmc2-ebi-cs-write-bus-turnaround-ns:
-        description: This property defines the delay between the end of current
-          write transaction and the next transaction in nanoseconds.
-
-      st,fmc2-ebi-cs-write-data-hold-ns:
-        description: This property defines the duration of the data hold phase
-          in nanoseconds used for asynchronous write transactions.
-
-      st,fmc2-ebi-cs-max-low-pulse-ns:
-        description: This property defines the maximum chip select low pulse
-          duration in nanoseconds for synchronous transactions. When this timing
-          reaches 0, the controller splits the current access, toggles NE to
-          allow device refresh and restarts a new access.
-
-    required:
-      - reg
+    $ref: mc-peripheral-props.yaml#
 
 required:
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml
new file mode 100644
index 000000000000..344878db8818
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32mp25-omm.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/st,stm32mp25-omm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Octo Memory Manager (OMM)
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+description: |
+  The STM32 Octo Memory Manager is a low-level interface that enables an
+  efficient OCTOSPI pin assignment with a full I/O matrix (before alternate
+  function map) and multiplex of single/dual/quad/octal SPI interfaces over
+  the same bus. It Supports up to:
+    - Two single/dual/quad/octal SPI interfaces
+    - Two ports for pin assignment
+
+properties:
+  compatible:
+    const: st,stm32mp25-omm
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description: |
+      Reflects the memory layout per OSPI instance.
+      Format:
+      <chip-select> 0 <registers base address> <size>
+    minItems: 2
+    maxItems: 2
+
+  reg:
+    items:
+      - description: OMM registers
+      - description: OMM memory map area
+
+  reg-names:
+    items:
+      - const: regs
+      - const: memory_map
+
+  memory-region:
+    description:
+      Memory region shared between the 2 OCTOSPI instance.
+      One or two phandle to a node describing a memory mapped region
+      depending of child number.
+    minItems: 1
+    maxItems: 2
+
+  memory-region-names:
+    description:
+      Identify to which OSPI instance the memory region belongs to.
+    items:
+      enum: [ospi1, ospi2]
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: omm
+      - const: ospi1
+      - const: ospi2
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: omm
+      - const: ospi1
+      - const: ospi2
+
+  access-controllers:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  st,syscfg-amcr:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      The Address Mapping Control Register (AMCR) is used to split the 256MB
+      memory map area shared between the 2 OSPI instance. The Octo Memory
+      Manager sets the AMCR depending of the memory-region configuration.
+      The memory split bitmask description is:
+        - 000: OCTOSPI1 (256 Mbytes), OCTOSPI2 unmapped
+        - 001: OCTOSPI1 (192 Mbytes), OCTOSPI2 (64 Mbytes)
+        - 010: OCTOSPI1 (128 Mbytes), OCTOSPI2 (128 Mbytes)
+        - 011: OCTOSPI1 (64 Mbytes), OCTOSPI2 (192 Mbytes)
+        - 1xx: OCTOSPI1 unmapped, OCTOSPI2 (256 Mbytes)
+    items:
+      - items:
+          - description: phandle to syscfg
+          - description: register offset within syscfg
+          - description: register bitmask for memory split
+
+  st,omm-req2ack-ns:
+    description:
+      In multiplexed mode (MUXEN = 1), this field defines the time in
+      nanoseconds between two transactions.
+    default: 0
+
+  st,omm-cssel-ovr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configure the chip select selector override for the 2 OCTOSPIs.
+      - 0: OCTOSPI1 chip select send to NCS1 OCTOSPI2 chip select send to NCS1
+      - 1: OCTOSPI1 chip select send to NCS2 OCTOSPI2 chip select send to NCS1
+      - 2: OCTOSPI1 chip select send to NCS1 OCTOSPI2 chip select send to NCS2
+      - 3: OCTOSPI1 chip select send to NCS2 OCTOSPI2 chip select send to NCS2
+    minimum: 0
+    maximum: 3
+    default: 0
+
+  st,omm-mux:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Configure the muxing between the 2 OCTOSPIs busses and the 2 output ports.
+      - 0: direct mode
+      - 1: mux OCTOSPI1 and OCTOSPI2 to port 1
+      - 2: swapped mode
+      - 3: mux OCTOSPI1 and OCTOSPI2 to port 2
+    minimum: 0
+    maximum: 3
+    default: 0
+
+patternProperties:
+  ^spi@[0-9]:
+    type: object
+    $ref: /schemas/spi/st,stm32mp25-ospi.yaml#
+    description: Required spi child node
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - st,syscfg-amcr
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+    ommanager@40500000 {
+      compatible = "st,stm32mp25-omm";
+      reg = <0x40500000 0x400>, <0x60000000 0x10000000>;
+      reg-names = "regs", "memory_map";
+      ranges = <0 0 0x40430000 0x400>,
+               <1 0 0x40440000 0x400>;
+      memory-region = <&mm_ospi1>, <&mm_ospi2>;
+      memory-region-names = "ospi1", "ospi2";
+      pinctrl-0 = <&ospi_port1_clk_pins_a
+                   &ospi_port1_io03_pins_a
+                   &ospi_port1_cs0_pins_a>;
+      pinctrl-1 = <&ospi_port1_clk_sleep_pins_a
+                   &ospi_port1_io03_sleep_pins_a
+                   &ospi_port1_cs0_sleep_pins_a>;
+      pinctrl-names = "default", "sleep";
+      clocks = <&rcc CK_BUS_OSPIIOM>,
+               <&scmi_clk CK_SCMI_OSPI1>,
+               <&scmi_clk CK_SCMI_OSPI2>;
+      clock-names = "omm", "ospi1", "ospi2";
+      resets = <&rcc OSPIIOM_R>,
+               <&scmi_reset RST_SCMI_OSPI1>,
+               <&scmi_reset RST_SCMI_OSPI2>;
+      reset-names = "omm", "ospi1", "ospi2";
+      access-controllers = <&rifsc 111>;
+      power-domains = <&CLUSTER_PD>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      st,syscfg-amcr = <&syscfg 0x2c00 0x7>;
+      st,omm-req2ack-ns = <0>;
+      st,omm-mux = <0>;
+      st,omm-cssel-ovr = <0>;
+
+      spi@0 {
+        compatible = "st,stm32mp25-ospi";
+        reg = <0 0 0x400>;
+        memory-region = <&mm_ospi1>;
+        interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&hpdma 2 0x62 0x00003121 0x0>,
+               <&hpdma 2 0x42 0x00003112 0x0>;
+        dma-names = "tx", "rx";
+        clocks = <&scmi_clk CK_SCMI_OSPI1>;
+        resets = <&scmi_reset RST_SCMI_OSPI1>, <&scmi_reset RST_SCMI_OSPI1DLL>;
+        access-controllers = <&rifsc 74>;
+        power-domains = <&CLUSTER_PD>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        st,syscfg-dlyb = <&syscfg 0x1000>;
+      };
+
+      spi@1 {
+        compatible = "st,stm32mp25-ospi";
+        reg = <1 0 0x400>;
+        memory-region = <&mm_ospi1>;
+        interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&hpdma 3 0x62 0x00003121 0x0>,
+               <&hpdma 3 0x42 0x00003112 0x0>;
+        dma-names = "tx", "rx";
+        clocks = <&scmi_clk CK_KER_OSPI2>;
+        resets = <&scmi_reset RST_SCMI_OSPI2>, <&scmi_reset RST_SCMI_OSPI1DLL>;
+        access-controllers = <&rifsc 75>;
+        power-domains = <&CLUSTER_PD>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        st,syscfg-dlyb = <&syscfg 0x1000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml
new file mode 100644
index 000000000000..d65313b33a3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/starfive,jh7110-dmc.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/starfive,jh7110-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 DMC
+
+maintainers:
+  - E Shattow <e@freeshell.de>
+
+description:
+  JH7110 DDR external memory interface LPDDR4/DDR4/DDR3/LPDDR3 32-bit at
+  2133Mbps (up to 2800Mbps).
+
+properties:
+  compatible:
+    items:
+      - const: starfive,jh7110-dmc
+
+  reg:
+    items:
+      - description: controller registers
+      - description: phy registers
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: pll
+
+  resets:
+    items:
+      - description: axi
+      - description: osc
+      - description: apb
+
+  reset-names:
+    items:
+      - const: axi
+      - const: osc
+      - const: apb
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+    #include <dt-bindings/reset/starfive,jh7110-crg.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      memory-controller@15700000 {
+        compatible = "starfive,jh7110-dmc";
+        reg = <0x0 0x15700000 0x0 0x10000>,
+              <0x0 0x13000000 0x0 0x10000>;
+        clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
+        clock-names = "pll";
+        resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
+                 <&syscrg JH7110_SYSRST_DDR_OSC>,
+                 <&syscrg JH7110_SYSRST_DDR_APB>;
+        reset-names = "axi", "osc", "apb";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml b/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml
deleted file mode 100644
index a24588474625..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml
+++ /dev/null
@@ -1,73 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/memory-controllers/synopsys,ddrc-ecc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Synopsys IntelliDDR Multi Protocol memory controller
-
-maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
-  - Manish Narani <manish.narani@xilinx.com>
-  - Michal Simek <michal.simek@xilinx.com>
-
-description: |
-  The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and
-  32-bit bus width configurations.
-
-  The Zynq DDR ECC controller has an optional ECC support in half-bus width
-  (16-bit) configuration.
-
-  These both ECC controllers correct single bit ECC errors and detect double bit
-  ECC errors.
-
-properties:
-  compatible:
-    enum:
-      - xlnx,zynq-ddrc-a05
-      - xlnx,zynqmp-ddrc-2.40a
-
-  interrupts:
-    maxItems: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: xlnx,zynqmp-ddrc-2.40a
-    then:
-      required:
-        - interrupts
-    else:
-      properties:
-        interrupts: false
-
-additionalProperties: false
-
-examples:
-  - |
-    memory-controller@f8006000 {
-        compatible = "xlnx,zynq-ddrc-a05";
-        reg = <0xf8006000 0x1000>;
-    };
-
-  - |
-    axi {
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        memory-controller@fd070000 {
-            compatible = "xlnx,zynqmp-ddrc-2.40a";
-            reg = <0x0 0xfd070000 0x0 0x30000>;
-            interrupt-parent = <&gic>;
-            interrupts = <0 112 4>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
index 9ed51185ff99..382ddab60fbd 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
@@ -8,7 +8,7 @@ title: Texas Instruments da8xx DDR2/mDDR memory controller
 
 maintainers:
   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   Documentation:
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
index 6e3995bb1630..383d19e0ba26 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: device tree bindings for children of the Texas Instruments GPMC
+title: Texas Instruments GPMC Bus Child Nodes
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
@@ -230,6 +230,13 @@ properties:
       Wait-pin used by client. Must be less than "gpmc,num-waitpins".
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  ti,wait-pin-polarity:
+    description: |
+      Set the desired polarity for the selected wait pin.
+      0 for active low, 1 for active high.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
   gpmc,wait-on-read:
     description: Enables wait monitoring on reads.
     type: boolean
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
index 25b42d68f9b3..c7a8a041da50 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments GPMC Memory Controller device-tree bindings
+title: Texas Instruments GPMC Memory Controller
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
@@ -23,13 +23,20 @@ properties:
     items:
       - enum:
           - ti,am3352-gpmc
+          - ti,am64-gpmc
           - ti,omap2420-gpmc
           - ti,omap2430-gpmc
           - ti,omap3430-gpmc
           - ti,omap4430-gpmc
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: data
 
   interrupts:
     maxItems: 1
@@ -44,6 +51,9 @@ properties:
     items:
       - const: fck
 
+  power-domains:
+    maxItems: 1
+
   dmas:
     items:
       - description: DMA channel for GPMC NAND prefetch
@@ -80,7 +90,7 @@ properties:
 
   interrupt-controller:
     description: |
-      The GPMC driver implements and interrupt controller for
+      The GPMC driver implements an interrupt controller for
       the NAND events "fifoevent" and "termcount" plus the
       rising/falling edges on the GPMC_WAIT pins.
       The interrupt number mapping is as follows
@@ -119,11 +129,8 @@ patternProperties:
       The child device node represents the device connected to the GPMC
       bus. The device can be a NAND chip, SRAM device, NOR device
       or an ASIC.
-
-    allOf:
-      - $ref: "ti,gpmc-child.yaml"
-
-    unevaluatedProperties: false
+    $ref: ti,gpmc-child.yaml
+    additionalProperties: true
 
 required:
   - compatible
@@ -133,6 +140,17 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-gpmc
+    then:
+      required:
+        - reg-names
+        - power-domains
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-ddrmc-edac.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-ddrmc-edac.yaml
new file mode 100644
index 000000000000..12f8e9f350bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-ddrmc-edac.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,versal-ddrmc-edac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal DDRMC (Integrated DDR Memory Controller)
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+  - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+
+description:
+  The integrated DDR Memory Controllers (DDRMCs) support both DDR4 and LPDDR4/
+  4X memory interfaces. Versal DDR memory controller has an optional ECC support
+  which correct single bit ECC errors and detect double bit ECC errors.
+
+properties:
+  compatible:
+    const: xlnx,versal-ddrmc
+
+  reg:
+    items:
+      - description: DDR Memory Controller registers
+      - description: NOC registers corresponding to DDR Memory Controller
+
+  reg-names:
+    items:
+      - const: base
+      - const: noc
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      memory-controller@f6150000 {
+        compatible = "xlnx,versal-ddrmc";
+        reg = <0x0 0xf6150000 0x0 0x2000>, <0x0 0xf6070000 0x0 0x20000>;
+        reg-names = "base", "noc";
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-net-ddrmc5.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-net-ddrmc5.yaml
new file mode 100644
index 000000000000..479288567d0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,versal-net-ddrmc5.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,versal-net-ddrmc5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal NET Memory Controller
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+
+description:
+  The integrated DDR Memory Controllers (DDRMCs) support both DDR5 and LPDDR5
+  compact and extended  memory interfaces. Versal NET DDR memory controller
+  has an optional ECC support which correct single bit ECC errors and detect
+  double bit ECC errors. It also has support for reporting other errors like
+  MMCM (Mixed-Mode Clock Manager) errors and General software errors.
+
+properties:
+  compatible:
+    const: xlnx,versal-net-ddrmc5
+
+  amd,rproc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the remoteproc_r5 rproc node using which APU interacts
+      with remote processor. APU primarily communicates with the RPU for
+      accessing the DDRMC address space and getting error notification.
+
+required:
+  - compatible
+  - amd,rproc
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller {
+        compatible = "xlnx,versal-net-ddrmc5";
+        amd,rproc = <&remoteproc_r5>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
new file mode 100644
index 000000000000..b74ad9a3305c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynq-ddrc-a05.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq A05 DDR Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Michal Simek <michal.simek@amd.com>
+
+description:
+  The Zynq DDR ECC controller has an optional ECC support in half-bus width
+  (16-bit) configuration. It is capable of correcting single bit ECC errors
+  and detecting double bit ECC errors.
+
+properties:
+  compatible:
+    const: xlnx,zynq-ddrc-a05
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@f8006000 {
+      compatible = "xlnx,zynq-ddrc-a05";
+      reg = <0xf8006000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml
new file mode 100644
index 000000000000..ca9fc747bf4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynqmp OCM(On-Chip Memory) Controller
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+  - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+
+description: |
+  The OCM supports 64-bit wide ECC functionality to detect multi-bit errors
+  and recover from a single-bit memory fault.On a write, if all bytes are
+  being written, the ECC is generated and written into the ECC RAM along with
+  the write-data that is written into the data RAM. If one or more bytes are
+  not written, then the read operation results in an correctable error or
+  uncorrectable error.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-ocmc-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    memory-controller@ff960000 {
+      compatible = "xlnx,zynqmp-ocmc-1.0";
+      reg = <0xff960000 0x1000>;
+      interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
deleted file mode 100644
index 937b3e5505e0..000000000000
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ /dev/null
@@ -1,282 +0,0 @@
-* AB8500 Multi-Functional Device (MFD)
-
-Required parent device properties:
-- compatible             : contains "stericsson,ab8500" or "stericsson,ab8505";
-- interrupts             : contains the IRQ line for the AB8500
-- interrupt-controller   : describes the AB8500 as an Interrupt Controller (has its own domain)
-- #interrupt-cells       : should be 2, for 2-cell format
-                            - The first cell is the AB8500 local IRQ number
-                            - The second cell is used to specify optional parameters
-                              - bits[3:0] trigger type and level flags:
-                                  1 = low-to-high edge triggered
-                                  2 = high-to-low edge triggered
-                                  4 = active high level-sensitive
-                                  8 = active low level-sensitive
-
-The AB8500 consists of a large and varied group of sub-devices:
-
-Device                     IRQ Names              Supply Names   Description
-------                     ---------              ------------   -----------
-ab8500-bm                :                      :              : Battery Manager
-ab8500-btemp             :                      :              : Battery Temperature
-ab8500-charger           :                      :              : Battery Charger
-ab8500-codec             :                      :              : Audio Codec
-ab8500-fg                : 			: vddadc       : Fuel Gauge
-			 : NCONV_ACCU           :	       : Accumulate N Sample Conversion
-			 : BATT_OVV		:	       : Battery Over Voltage
-			 : LOW_BAT_F		:	       : LOW threshold battery voltage
-			 : CC_INT_CALIB		:	       : Coulomb Counter Internal Calibration
-			 : CCEOC		:	       : Coulomb Counter End of Conversion
-ab8500-btemp		 :			: vtvout       : Battery Temperature
-			 : BAT_CTRL_INDB        :              : Battery Removal Indicator
-			 : BTEMP_LOW            :              : Btemp < BtempLow, if battery temperature is lower than -10°C
-			 : BTEMP_LOW_MEDIUM     :              : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
-			 : BTEMP_MEDIUM_HIGH    :	       : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and MaxTemp
-			 : BTEMP_HIGH           :              : Btemp > BtempHigh, if battery temperature is higher than MaxTemp
-ab8500-charger		 :			: vddadc       : Charger interface
-			 : MAIN_CH_UNPLUG_DET	:	       : main charger unplug detection management (not in 8505)
-			 : MAIN_CHARGE_PLUG_DET	:	       : main charger plug detection management (not in 8505)
-			 : MAIN_EXT_CH_NOT_OK	:	       : main charger not OK
-			 : MAIN_CH_TH_PROT_R	:	       : Die temp is above main charger
-			 : MAIN_CH_TH_PROT_F	:	       : Die temp is below main charger
-			 : VBUS_DET_F		:	       : VBUS falling detected
-			 : VBUS_DET_R		:	       : VBUS rising detected
-			 : USB_LINK_STATUS	:	       : USB link status has changed
-			 : USB_CH_TH_PROT_R	:	       : Die temp is above usb charger
-			 : USB_CH_TH_PROT_F	:	       : Die temp is below usb charger
-			 : USB_CHARGER_NOT_OKR	:	       : allowed USB charger not ok detection
-			 : VBUS_OVV		:	       : Overvoltage on Vbus ball detected (USB charge is stopped)
-			 : CH_WD_EXP		:	       : Charger watchdog detected
-ab8500-gpadc             : HW_CONV_END          : vddadc       : Analogue to Digital Converter
-                           SW_CONV_END          :              :
-ab8500-gpio              :                      :              : GPIO Controller (AB8500)
-ab8505-gpio              :                      :              : GPIO Controller (AB8505)
-ab8500-ponkey            : ONKEY_DBF            :              : Power-on Key
-                           ONKEY_DBR            :              :
-ab8500-pwm               :                      :              : Pulse Width Modulator
-ab8500-regulator         :                      :              : Regulators (AB8500)
-ab8505-regulator         :                      :              : Regulators (AB8505)
-ab8500-rtc               : 60S                  :              : Real Time Clock
-                         : ALARM                :              :
-ab8500-sysctrl           :                      :              : System Control
-ab8500-usb               : ID_WAKEUP_R          : vddulpivio18 : Universal Serial Bus
-                         : ID_WAKEUP_F          : v-ape        :
-                         : VBUS_DET_F           : musb_1v8     :
-                         : VBUS_DET_R           :              :
-                         : USB_LINK_STATUS      :              :
-                         : USB_ADP_PROBE_PLUG   :              :
-                         : USB_ADP_PROBE_UNPLUG :              :
-
-Required child device properties:
-- compatible             : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
-                                               pwm|regulator|rtc|sysctrl|usb]";
-
-  A few child devices require ADC channels from the GPADC node. Those follow the
-  standard bindings from
-  https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
-  and Documentation/devicetree/bindings/iio/adc/adc.yaml
-
-  abx500-temp		 : io-channels "aux1" and "aux2" for measuring external
-			   temperatures.
-  ab8500-fg		 : io-channel "main_bat_v" for measuring main battery voltage,
-  ab8500-btemp		 : io-channels "btemp_ball" and "bat_ctrl" for measuring the
-			   battery voltage.
-  ab8500-charger	 : io-channels "main_charger_v", "main_charger_c", "vbus_v",
-			   "usb_charger_c" for measuring voltage and current of the
-			   different charging supplies.
-
-Optional child device properties:
-- interrupts             : contains the device IRQ(s) using the 2-cell format (see above)
-- interrupt-names        : contains names of IRQ resource in the order in which they were
-                           supplied in the interrupts property
-- <supply_name>-supply   : contains a phandle to the regulator supply node in Device Tree
-
-Non-standard child device properties:
- - Audio CODEC:
-   - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential)
-   - stericsson,amic1a-bias-vamic2          : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,amic1b-bias-vamic2          : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,amic2-bias-vamic1           : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,earpeice-cmv                : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
-
-ab8500 {
-         compatible = "stericsson,ab8500";
-         interrupts = <0 40 0x4>;
-         interrupt-controller;
-         #interrupt-cells = <2>;
-
-         ab8500-rtc {
-                 compatible = "stericsson,ab8500-rtc";
-                 interrupts = <17 0x4
-                               18 0x4>;
-                 interrupt-names = "60S", "ALARM";
-         };
-
-        ab8500-gpadc {
-                compatible = "stericsson,ab8500-gpadc";
-                interrupts = <32 0x4
-                              39 0x4>;
-                interrupt-names = "HW_CONV_END", "SW_CONV_END";
-                vddadc-supply = <&ab8500_ldo_tvout_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#io-channel-cells = <1>;
-
-		/* GPADC channels */
-		bat_ctrl: channel@1 {
-			reg = <0x01>;
-		};
-		btemp_ball: channel@2 {
-			reg = <0x02>;
-		};
-		main_charger_v: channel@3 {
-			reg = <0x03>;
-		};
-		acc_detect1: channel@4 {
-			reg = <0x04>;
-		};
-		acc_detect2: channel@5 {
-			reg = <0x05>;
-		};
-		adc_aux1: channel@6 {
-			reg = <0x06>;
-		};
-		adc_aux2: channel@7 {
-			reg = <0x07>;
-		};
-		main_batt_v: channel@8 {
-			reg = <0x08>;
-		};
-		vbus_v: channel@9 {
-			reg = <0x09>;
-		};
-		main_charger_c: channel@a {
-			reg = <0x0a>;
-		};
-		usb_charger_c: channel@b {
-			reg = <0x0b>;
-		};
-		bk_bat_v: channel@c {
-			reg = <0x0c>;
-		};
-		die_temp: channel@d {
-			reg = <0x0d>;
-		};
-		usb_id: channel@e {
-			reg = <0x0e>;
-		};
-		xtal_temp: channel@12 {
-			reg = <0x12>;
-		};
-		vbat_true_meas: channel@13 {
-			reg = <0x13>;
-		};
-		bat_ctrl_and_ibat: channel@1c {
-			reg = <0x1c>;
-		};
-		vbat_meas_and_ibat: channel@1d {
-			reg = <0x1d>;
-		};
-		vbat_true_meas_and_ibat: channel@1e {
-			reg = <0x1e>;
-		};
-		bat_temp_and_ibat: channel@1f {
-			reg = <0x1f>;
-		};
-        };
-
-	ab8500_temp {
-		compatible = "stericsson,abx500-temp";
-		io-channels = <&gpadc 0x06>,
-			      <&gpadc 0x07>;
-		io-channel-name = "aux1", "aux2";
-	};
-
-	ab8500_battery: ab8500_battery {
-		stericsson,battery-type = "LIPO";
-		thermistor-on-batctrl;
-	};
-
-	ab8500_fg {
-		compatible = "stericsson,ab8500-fg";
-		battery	   = <&ab8500_battery>;
-		io-channels = <&gpadc 0x08>;
-		io-channel-name = "main_bat_v";
-	};
-
-	ab8500_btemp {
-		compatible = "stericsson,ab8500-btemp";
-		battery	   = <&ab8500_battery>;
-		io-channels = <&gpadc 0x02>,
-			      <&gpadc 0x01>;
-		io-channel-name = "btemp_ball",
-				"bat_ctrl";
-	};
-
-	ab8500_charger {
-		compatible	= "stericsson,ab8500-charger";
-		battery		= <&ab8500_battery>;
-		vddadc-supply	= <&ab8500_ldo_tvout_reg>;
-		io-channels = <&gpadc 0x03>,
-			      <&gpadc 0x0a>,
-			      <&gpadc 0x09>,
-			      <&gpadc 0x0b>;
-		io-channel-name = "main_charger_v",
-				"main_charger_c",
-				"vbus_v",
-				"usb_charger_c";
-	};
-
-        ab8500-usb {
-                compatible = "stericsson,ab8500-usb";
-                interrupts = < 90 0x4
-                               96 0x4
-                               14 0x4
-                               15 0x4
-                               79 0x4
-                               74 0x4
-                               75 0x4>;
-                interrupt-names = "ID_WAKEUP_R",
-                                  "ID_WAKEUP_F",
-                                  "VBUS_DET_F",
-                                  "VBUS_DET_R",
-                                  "USB_LINK_STATUS",
-                                  "USB_ADP_PROBE_PLUG",
-                                  "USB_ADP_PROBE_UNPLUG";
-                vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
-                v-ape-supply = <&db8500_vape_reg>;
-                musb_1v8-supply = <&db8500_vsmps2_reg>;
-        };
-
-        ab8500-ponkey {
-                compatible = "stericsson,ab8500-ponkey";
-                interrupts = <6 0x4
-                              7 0x4>;
-                interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
-        };
-
-        ab8500-sysctrl {
-                compatible = "stericsson,ab8500-sysctrl";
-        };
-
-        ab8500-pwm {
-                compatible = "stericsson,ab8500-pwm";
-        };
-
-	codec: ab8500-codec {
-		compatible = "stericsson,ab8500-codec";
-
-		stericsson,earpeice-cmv = <950>; /* Units in mV. */
-	};
-
-        ab8500-regulators {
-                compatible = "stericsson,ab8500-regulator";
-
-                ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-                        /*
-                         * See: Documentation/devicetree/bindings/regulator/regulator.txt
-                         * for more information on regulators
-                         */
-                };
-        };
-};
diff --git a/Documentation/devicetree/bindings/mfd/act8945a.txt b/Documentation/devicetree/bindings/mfd/act8945a.txt
deleted file mode 100644
index 5ca75d888b4a..000000000000
--- a/Documentation/devicetree/bindings/mfd/act8945a.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Device-Tree bindings for Active-semi ACT8945A MFD driver
-
-Required properties:
- - compatible: "active-semi,act8945a".
- - reg: the I2C slave address for the ACT8945A chip
-
-The chip exposes two subdevices:
- - a regulators: see ../regulator/act8945a-regulator.txt
- - a charger: see ../power/act8945a-charger.txt
-
-Example:
-	pmic@5b {
-		compatible = "active-semi,act8945a";
-		reg = <0x5b>;
-
-		active-semi,vsel-high;
-
-		regulators {
-			vdd_1v35_reg: REG_DCDC1 {
-				regulator-name = "VDD_1V35";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			vdd_1v2_reg: REG_DCDC2 {
-				regulator-name = "VDD_1V2";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_reg: REG_DCDC3 {
-				regulator-name = "VDD_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_fuse_reg: REG_LDO1 {
-				regulator-name = "VDD_FUSE";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_lp_reg: REG_LDO2 {
-				regulator-name = "VDD_3V3_LP";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_led_reg: REG_LDO3 {
-				regulator-name = "VDD_LED";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sdhc_1v8_reg: REG_LDO4 {
-				regulator-name = "VDD_SDHC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-
-		charger {
-			compatible = "active-semi,act8945a-charger";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
-			interrupt-parent = <&pioA>;
-			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
-
-			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-			active-semi,input-voltage-threshold-microvolt = <6600>;
-			active-semi,precondition-timeout = <40>;
-			active-semi,total-timeout = <3>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
index dd43a0c766f3..9ae419748aa7 100644
--- a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
+++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Actions Semi ATC260x Power Management IC bindings
+title: Actions Semi ATC260x Power Management IC
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
@@ -21,7 +21,7 @@ description: |
   regulators.
 
 allOf:
-  - $ref: ../input/input.yaml
+  - $ref: /schemas/input/input.yaml
 
 properties:
   compatible:
@@ -57,7 +57,7 @@ properties:
 
       switchldo1:
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true
@@ -76,7 +76,7 @@ properties:
 
       "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
         type: object
-        $ref: ../regulator/regulator.yaml
+        $ref: /schemas/regulator/regulator.yaml
 
         properties:
           regulator-name: true
@@ -129,7 +129,7 @@ required:
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml b/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml
new file mode 100644
index 000000000000..2d4ecee3f254
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/adi,adp5585.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5585 Keypad Decoder and I/O Expansion
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description:
+  The ADP5585 is a 10/11 input/output port expander with a built in keypad
+  matrix decoder, programmable logic, reset generator, and PWM generator.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - adi,adp5585-00  # Default
+              - adi,adp5585-01  # 11 GPIOs
+              - adi,adp5585-02  # No pull-up resistors by default on special pins
+              - adi,adp5585-03  # Alternate I2C address
+              - adi,adp5585-04  # Pull-down resistors on all pins by default
+          - const: adi,adp5585
+      - items:
+          - enum:
+              - adi,adp5589-00  # Default
+              - adi,adp5589-01  # R4 defaulted to RESET1 output
+              - adi,adp5589-02  # Pull-down resistors by default on special pins
+          - const: adi,adp5589
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-reserved-ranges: true
+
+  "#pwm-cells":
+    const: 3
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  poll-interval:
+    enum: [10, 20, 30, 40]
+    default: 10
+
+  adi,keypad-pins:
+    description: Specifies the pins used for the keypad matrix.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  adi,unlock-events:
+    description:
+      Specifies a maximum of 2 events that can be used to unlock the keypad.
+      If this property is set, the keyboard will be locked and only unlocked
+      after these keys/gpis are pressed. The value 127 serves as a wildcard which
+      means any key can be used for unlocking.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    items:
+      anyOf:
+        - minimum: 1
+          maximum: 88
+        - minimum: 97
+          maximum: 115
+        - const: 127
+
+  adi,unlock-trigger-sec:
+    description:
+      Defines the time in which the second unlock event must occur after the
+      first unlock event has occurred.
+    maximum: 7
+    default: 0
+
+  adi,reset1-events:
+    description:
+      Defines the trigger events (key/gpi presses) that can generate reset
+      conditions one the reset1 block.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 3
+
+  adi,reset2-events:
+    description:
+      Defines the trigger events (key/gpi presses) that can generate reset
+      conditions one the reset2 block.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+
+  adi,reset1-active-high:
+    description: Sets the reset1 signal as active high.
+    type: boolean
+
+  adi,reset2-active-high:
+    description: Sets the reset2 signal as active high.
+    type: boolean
+
+  adi,rst-passthrough-enable:
+    description: Allows the RST pin to override (OR with) the reset1 signal.
+    type: boolean
+
+  adi,reset-trigger-ms:
+    description:
+      Defines the length of time that the reset events must be active before a
+      reset signal is generated. All events must be active at the same time for
+      the same duration.
+    enum: [0, 1000, 1500, 2000, 2500, 3000, 3500, 4000]
+    default: 0
+
+  adi,reset-pulse-width-us:
+    description: Defines the pulse width of the reset signals.
+    enum: [500, 1000, 2000, 10000]
+    default: 500
+
+patternProperties:
+  "-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
+
+dependencies:
+  linux,keymap:
+    - adi,keypad-pins
+    - interrupts
+  interrupt-controller:
+    - interrupts
+  adi,unlock-trigger-sec:
+    - adi,unlock-events
+  adi,reset1-active-high:
+    - adi,reset1-events
+  adi,rst-passtrough-enable:
+    - adi,reset1-events
+  adi,reset2-active-high:
+    - adi,reset2-events
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+  - $ref: /schemas/input/input.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adp5585-01
+    then:
+      properties:
+        adi,unlock-events: false
+        adi,unlock-trigger-sec: false
+        gpio-reserved-ranges: false
+        reset-gpios: false
+        adi,keypad-pins:
+          minItems: 2
+          maxItems: 11
+          items:
+            minimum: 0
+            maximum: 10
+        adi,reset1-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 30
+              - minimum: 37
+                maximum: 47
+        adi,reset2-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 30
+              - minimum: 37
+                maximum: 47
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adp5585-00
+              - adi,adp5585-02
+              - adi,adp5585-03
+              - adi,adp5585-04
+    then:
+      properties:
+        adi,unlock-events: false
+        adi,unlock-trigger-sec: false
+        adi,keypad-pins:
+          minItems: 2
+          maxItems: 10
+          items:
+            enum: [0, 1, 2, 3, 4, 6, 7, 8, 9, 10]
+        adi,reset1-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 25
+              - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47]
+        adi,reset2-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 25
+              - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47]
+        gpio-reserved-ranges:
+          maxItems: 1
+          items:
+            items:
+              - const: 5
+              - const: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adp5589-00
+              - adi,adp5589-01
+              - adi,adp5589-02
+    then:
+      properties:
+        gpio-reserved-ranges: false
+        adi,keypad-pins:
+          minItems: 2
+          maxItems: 19
+          items:
+            minimum: 0
+            maximum: 18
+        adi,reset1-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 88
+              - minimum: 97
+                maximum: 115
+        adi,reset2-events:
+          items:
+            anyOf:
+              - minimum: 1
+                maximum: 88
+              - minimum: 97
+                maximum: 115
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        io-expander@34 {
+            compatible = "adi,adp5585-00", "adi,adp5585";
+            reg = <0x34>;
+
+            vdd-supply = <&reg_3v3>;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-reserved-ranges = <5 1>;
+
+            #pwm-cells = <3>;
+
+            interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+
+            adi,reset1-events = <1 43>;
+            adi,reset2-events = <2 3>;
+            adi,reset-trigger-ms = <2000>;
+
+            /*
+             * col0, col1, col2
+             * row0, row1, row2
+             */
+            adi,keypad-pins = <0 1 2 6 7 8>;
+
+            linux,keymap = <
+                MATRIX_KEY(0x00, 0x00, KEY_1)
+                MATRIX_KEY(0x00, 0x01, KEY_2)
+                MATRIX_KEY(0x00, 0x02, KEY_3)
+
+                MATRIX_KEY(0x01, 0x00, KEY_A)
+                MATRIX_KEY(0x01, 0x01, KEY_B)
+                MATRIX_KEY(0x01, 0x02, KEY_C)
+
+                MATRIX_KEY(0x02, 0x00, BTN_1)
+                MATRIX_KEY(0x02, 0x01, BTN_2)
+                MATRIX_KEY(0x02, 0x02, BTN_3)
+            >;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
new file mode 100644
index 000000000000..c7895b2c38c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77540/MAX77541 PMIC from ADI
+
+maintainers:
+  - Okan Sahin <okan.sahin@analog.com>
+
+description: |
+  MAX77540 is a Power Management IC with 2 buck regulators.
+
+  MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC.
+
+properties:
+  compatible:
+    enum:
+      - adi,max77540
+      - adi,max77541
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    $ref: /schemas/regulator/adi,max77541-regulator.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+            compatible = "adi,max77541";
+            reg = <0x69>;
+            interrupt-parent = <&gpio>;
+            interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+            regulators {
+                buck1 {
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <5200000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                buck2 {
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <5200000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml
new file mode 100644
index 000000000000..4a81ed82ef34
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/airoha,en7581-gpio-sysctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 GPIO System Controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+
+description:
+  Airoha EN7581 SoC GPIO system controller which provided a register map
+  for controlling the GPIO, pins and PWM of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: airoha,en7581-gpio-sysctl
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  pinctrl:
+    type: object
+    $ref: /schemas/pinctrl/airoha,en7581-pinctrl.yaml
+    description:
+      Child node definition for EN7581 Pin controller
+
+  pwm:
+    type: object
+    $ref: /schemas/pwm/airoha,en7581-pwm.yaml
+    description:
+      Child node definition for EN7581 PWM controller
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    system-controller@1fbf0200 {
+      compatible = "airoha,en7581-gpio-sysctl", "syscon", "simple-mfd";
+      reg = <0x1fbf0200 0xc0>;
+
+      pinctrl {
+        compatible = "airoha,en7581-pinctrl";
+
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        mmc-pins {
+          mux {
+            function = "emmc";
+            groups = "emmc";
+          };
+        };
+
+        mdio-pins {
+          mux {
+            function = "mdio";
+            groups = "mdio";
+          };
+
+          conf {
+            pins = "gpio2";
+            output-enable;
+          };
+        };
+      };
+
+      pwm {
+        compatible = "airoha,en7581-pwm";
+
+        #pwm-cells = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
index f591332fc462..93f5065a6280 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings
+title: Allwinner A10 Resistive Touchscreen Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
index d131759ccaf3..ca0e9f1f2354 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun6i-a31-prcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 PRCM Device Tree Bindings
+title: Allwinner A31 PRCM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -20,8 +20,9 @@ properties:
     maxItems: 1
 
 patternProperties:
-  "^.*_(clk|rst)$":
+  "^.*-(clk|rst)$":
     type: object
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -33,20 +34,51 @@ patternProperties:
           - allwinner,sun6i-a31-clock-reset
           - fixed-factor-clock
 
+    required:
+      - compatible
+
     allOf:
       - if:
           properties:
             compatible:
               contains:
-                const: allwinner,sun6i-a31-apb0-clk
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun4i-a10-mod0-clk
 
         then:
           properties:
             "#clock-cells":
               const: 0
 
-            # Already checked in the main schema
-            compatible: true
+            clocks:
+              maxItems: 2
+
+            clock-output-names:
+              maxItems: 1
+
+          required:
+            - "#clock-cells"
+            - clocks
+            - clock-output-names
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun6i-a31-apb0-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
 
             clocks:
               maxItems: 1
@@ -54,16 +86,11 @@ patternProperties:
             clock-output-names:
               maxItems: 1
 
-            phandle: true
-
           required:
             - "#clock-cells"
-            - compatible
             - clocks
             - clock-output-names
 
-          additionalProperties: false
-
       - if:
           properties:
             compatible:
@@ -79,9 +106,6 @@ patternProperties:
                 offset of the bit controlling this particular gate in
                 the register.
 
-            # Already checked in the main schema
-            compatible: true
-
             clocks:
               maxItems: 1
 
@@ -89,16 +113,11 @@ patternProperties:
               minItems: 1
               maxItems: 32
 
-            phandle: true
-
           required:
             - "#clock-cells"
-            - compatible
             - clocks
             - clock-output-names
 
-          additionalProperties: false
-
       - if:
           properties:
             compatible:
@@ -110,9 +129,6 @@ patternProperties:
             "#clock-cells":
               const: 0
 
-            # Already checked in the main schema
-            compatible: true
-
             clocks:
               maxItems: 4
               description: >
@@ -122,16 +138,11 @@ patternProperties:
             clock-output-names:
               maxItems: 1
 
-            phandle: true
-
           required:
             - "#clock-cells"
-            - compatible
             - clocks
             - clock-output-names
 
-          additionalProperties: false
-
       - if:
           properties:
             compatible:
@@ -143,16 +154,8 @@ patternProperties:
             "#reset-cells":
               const: 1
 
-            # Already checked in the main schema
-            compatible: true
-
-            phandle: true
-
           required:
             - "#reset-cells"
-            - compatible
-
-          additionalProperties: false
 
 required:
   - compatible
@@ -168,7 +171,7 @@ examples:
         compatible = "allwinner,sun6i-a31-prcm";
         reg = <0x01f01400 0x200>;
 
-        ar100: ar100_clk {
+        ar100: ar100-clk {
             compatible = "allwinner,sun6i-a31-ar100-clk";
             #clock-cells = <0>;
             clocks = <&rtc 0>, <&osc24M>,
@@ -177,7 +180,7 @@ examples:
             clock-output-names = "ar100";
         };
 
-        ahb0: ahb0_clk {
+        ahb0: ahb0-clk {
             compatible = "fixed-factor-clock";
             #clock-cells = <0>;
             clock-div = <1>;
@@ -186,14 +189,14 @@ examples:
             clock-output-names = "ahb0";
         };
 
-        apb0: apb0_clk {
+        apb0: apb0-clk {
             compatible = "allwinner,sun6i-a31-apb0-clk";
             #clock-cells = <0>;
             clocks = <&ahb0>;
             clock-output-names = "apb0";
         };
 
-        apb0_gates: apb0_gates_clk {
+        apb0_gates: apb0-gates-clk {
             compatible = "allwinner,sun6i-a31-apb0-gates-clk";
             #clock-cells = <1>;
             clocks = <&apb0>;
@@ -203,14 +206,14 @@ examples:
                                  "apb0_i2c";
         };
 
-        ir_clk: ir_clk {
+        ir_clk: ir-clk {
             #clock-cells = <0>;
             compatible = "allwinner,sun4i-a10-mod0-clk";
             clocks = <&rtc 0>, <&osc24M>;
             clock-output-names = "ir";
         };
 
-        apb0_rst: apb0_rst {
+        apb0_rst: apb0-rst {
             compatible = "allwinner,sun6i-a31-clock-reset";
             #reset-cells = <1>;
         };
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
index aa5e683b236c..e51f85519911 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun8i-a23-prcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 PRCM Device Tree Bindings
+title: Allwinner A23 PRCM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -22,6 +22,7 @@ properties:
 patternProperties:
   "^.*(clk|rst|codec).*$":
     type: object
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -40,6 +41,15 @@ patternProperties:
           properties:
             compatible:
               contains:
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
                 const: allwinner,sun8i-a23-apb0-clk
 
         then:
@@ -47,25 +57,17 @@ patternProperties:
             "#clock-cells":
               const: 0
 
-            # Already checked in the main schema
-            compatible: true
-
             clocks:
               maxItems: 1
 
             clock-output-names:
               maxItems: 1
 
-            phandle: true
-
           required:
             - "#clock-cells"
-            - compatible
             - clocks
             - clock-output-names
 
-          additionalProperties: false
-
       - if:
           properties:
             compatible:
@@ -81,9 +83,6 @@ patternProperties:
                 offset of the bit controlling this particular gate in
                 the register.
 
-            # Already checked in the main schema
-            compatible: true
-
             clocks:
               maxItems: 1
 
@@ -91,16 +90,11 @@ patternProperties:
               minItems: 1
               maxItems: 32
 
-            phandle: true
-
           required:
             - "#clock-cells"
-            - compatible
             - clocks
             - clock-output-names
 
-          additionalProperties: false
-
       - if:
           properties:
             compatible:
@@ -112,34 +106,8 @@ patternProperties:
             "#reset-cells":
               const: 1
 
-            # Already checked in the main schema
-            compatible: true
-
-            phandle: true
-
           required:
             - "#reset-cells"
-            - compatible
-
-          additionalProperties: false
-
-      - if:
-          properties:
-            compatible:
-              contains:
-                const: allwinner,sun8i-a23-codec-analog
-
-        then:
-          properties:
-            # Already checked in the main schema
-            compatible: true
-
-            phandle: true
-
-          required:
-            - compatible
-
-          additionalProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml b/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml
new file mode 100644
index 000000000000..c442c3cdffed
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ampere,smpro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ampere Altra SMPro firmware driver
+
+maintainers:
+  - Quan Nguyen <quan@os.amperecomputing.com>
+
+description: |
+  Ampere Altra SMPro firmware may contain different blocks like hardware
+  monitoring, error monitoring and other miscellaneous features.
+
+properties:
+  compatible:
+    enum:
+      - ampere,smpro
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        smpro@4f {
+            compatible = "ampere,smpro";
+            reg = <0x4f>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ams,as3711.yaml b/Documentation/devicetree/bindings/mfd/ams,as3711.yaml
new file mode 100644
index 000000000000..ad8649cbb2cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ams,as3711.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ams,as3711.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Austria MicroSystems AS3711 Quad Buck High Current PMIC with Charger
+
+maintainers:
+  - Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
+
+description:
+  AS3711 is an I2C PMIC from Austria MicroSystems with multiple DC/DC and LDO
+  power supplies, a battery charger and an RTC.  So far only bindings for the
+  two step-up DC/DC converters are defined.
+
+properties:
+  compatible:
+    const: ams,as3711
+
+  reg:
+    maxItems: 1
+
+  backlight:
+    description:
+      Step-up converter configuration, to be used as a backlight source
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: ams,as3711-bl
+
+      su1-dev:
+        description: Framebuffer phandle for the first step-up converter
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      su1-max-uA:
+        description: Maximum current for the first step-up converter
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      su2-dev:
+        description: Framebuffer phandle for the second step-up converter
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      su2-max-uA:
+        description: Maximum current for the second step-up converter
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      su2-feedback-voltage:
+        description: Second step-up converter uses voltage feedback
+        type: boolean
+
+      su2-feedback-curr1:
+        description:
+          Second step-up converter uses CURR1 input for current feedback
+        type: boolean
+
+      su2-feedback-curr2:
+        description:
+          Second step-up converter uses CURR2 input for current feedback
+        type: boolean
+
+      su2-feedback-curr3:
+        description:
+          Second step-up converter uses CURR3 input for current feedback
+        type: boolean
+
+      su2-feedback-curr-auto:
+        description:
+          Second step-up converter uses automatic current feedback selection
+        type: boolean
+
+      su2-fbprot-lx-sd4:
+        description:
+          Second step-up converter uses LX_SD4 for over-voltage protection
+        type: boolean
+
+      su2-fbprot-gpio2:
+        description:
+          Second step-up converter uses GPIO2 for over-voltage protection
+        type: boolean
+
+      su2-fbprot-gpio3:
+        description:
+          Second step-up converter uses GPIO3 for over-voltage protection
+        type: boolean
+
+      su2-fbprot-gpio4:
+        description:
+          Second step-up converter uses GPIO4 for over-voltage protection
+        type: boolean
+
+      su2-auto-curr1:
+        description:
+          Second step-up converter uses CURR1 input for automatic current
+          feedback
+        type: boolean
+
+      su2-auto-curr2:
+        description:
+          Second step-up converter uses CURR2 input for automatic current
+          feedback
+        type: boolean
+
+      su2-auto-curr3:
+        description:
+          Second step-up converter uses CURR3 input for automatic current
+          feedback
+        type: boolean
+
+    required:
+      - compatible
+
+    dependentRequired:
+      # To use the SU1 converter as a backlight source the following two
+      # properties must be provided:
+      su1-dev: [ su1-max-uA ]
+      su1-max-uA: [ su1-dev ]
+
+      # To use the SU2 converter as a backlight source the following two
+      # properties must be provided:
+      su2-dev: [ su2-max-uA ]
+      su2-max-uA: [ su2-dev ]
+
+      su2-feedback-voltage: [ su2-dev ]
+      su2-feedback-curr1: [ su2-dev ]
+      su2-feedback-curr2: [ su2-dev ]
+      su2-feedback-curr3: [ su2-dev ]
+      su2-feedback-curr-auto: [ su2-dev ]
+      su2-fbprot-lx-sd4: [ su2-dev ]
+      su2-fbprot-gpio2: [ su2-dev ]
+      su2-fbprot-gpio3: [ su2-dev ]
+      su2-fbprot-gpio4: [ su2-dev ]
+      su2-auto-curr1: [ su2-feedback-curr-auto ]
+      su2-auto-curr2: [ su2-feedback-curr-auto ]
+      su2-auto-curr3: [ su2-feedback-curr-auto ]
+
+    dependentSchemas:
+      su2-dev:
+        allOf:
+          - oneOf:
+              - required:
+                  - su2-feedback-voltage
+              - required:
+                  - su2-feedback-curr1
+              - required:
+                  - su2-feedback-curr2
+              - required:
+                  - su2-feedback-curr3
+              - required:
+                  - su2-feedback-curr-auto
+          - oneOf:
+              - required:
+                  - su2-fbprot-lx-sd4
+              - required:
+                  - su2-fbprot-gpio2
+              - required:
+                  - su2-fbprot-gpio3
+              - required:
+                  - su2-fbprot-gpio4
+
+      su2-feedback-curr-auto:
+        anyOf:
+          - required:
+              - su2-auto-curr1
+          - required:
+              - su2-auto-curr2
+          - required:
+              - su2-auto-curr3
+
+  regulators:
+    description: Other DC/DC and LDO supplies
+    type: object
+    unevaluatedProperties: false
+    patternProperties:
+      "^(sd[1-4]|ldo[1-8])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@40 {
+            compatible = "ams,as3711";
+            reg = <0x40>;
+
+            regulators {
+                sd4 {
+                    regulator-name = "1.215V";
+                    regulator-min-microvolt = <1215000>;
+                    regulator-max-microvolt = <1235000>;
+                };
+                ldo2 {
+                    regulator-name = "2.8V CPU";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+            };
+
+            backlight {
+                compatible = "ams,as3711-bl";
+                su2-dev = <&lcdc>;
+                su2-max-uA = <36000>;
+                su2-feedback-curr-auto;
+                su2-fbprot-gpio4;
+                su2-auto-curr1;
+                su2-auto-curr2;
+                su2-auto-curr3;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/apple,smc.yaml b/Documentation/devicetree/bindings/mfd/apple,smc.yaml
new file mode 100644
index 000000000000..5429538f7e2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/apple,smc.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/apple,smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Mac System Management Controller
+
+maintainers:
+  - Sven Peter <sven@kernel.org>
+
+description:
+  Apple Mac System Management Controller implements various functions
+  such as GPIO, RTC, power, reboot.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: apple,t6020-smc
+          - const: apple,t8103-smc
+      - items:
+          - enum:
+              # Do not add additional SoC to this list.
+              - apple,t6000-smc
+              - apple,t8103-smc
+              - apple,t8112-smc
+          - const: apple,smc
+
+  reg:
+    items:
+      - description: SMC area
+      - description: SRAM area
+
+  reg-names:
+    items:
+      - const: smc
+      - const: sram
+
+  mboxes:
+    maxItems: 1
+
+  gpio:
+    $ref: /schemas/gpio/apple,smc-gpio.yaml
+
+  reboot:
+    $ref: /schemas/power/reset/apple,smc-reboot.yaml
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - mboxes
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      smc@23e400000 {
+        compatible = "apple,t8103-smc", "apple,smc";
+        reg = <0x2 0x3e400000 0x0 0x4000>,
+               <0x2 0x3fe00000 0x0 0x100000>;
+        reg-names = "smc", "sram";
+        mboxes = <&smc_mbox>;
+
+        smc_gpio: gpio {
+          compatible = "apple,smc-gpio";
+          gpio-controller;
+          #gpio-cells = <2>;
+        };
+
+        reboot {
+          compatible = "apple,smc-reboot";
+          nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+                        <&boot_error_count>, <&panic_count>;
+          nvmem-cell-names = "shutdown_flag", "boot_stage",
+                             "boot_error_count", "panic_count";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml b/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml
new file mode 100644
index 000000000000..46b164ae0831
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/arm,dev-platforms-syscon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Ltd Developer Platforms System Controllers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  The Arm Ltd Integrator, Realview, and Versatile families of developer
+  platforms are contain various system controller blocks. Often these blocks
+  are part of a daughterboard or motherboard module.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - arm,integrator-ap-syscon
+              - arm,integrator-cp-syscon
+              - arm,integrator-sp-syscon
+              - arm,im-pd1-syscon
+          - const: syscon
+      - items:
+          - enum:
+              - arm,core-module-integrator
+              - arm,integrator-ap-syscon
+              - arm,integrator-cp-syscon
+              - arm,integrator-sp-syscon
+              - arm,realview-eb-syscon
+              - arm,realview-pb1176-syscon
+              - arm,realview-pb11mp-syscon
+              - arm,realview-pba8-syscon
+              - arm,realview-pbx-syscon
+              - arm,versatile-ib2-syscon
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - enum:
+              - arm,realview-eb11mp-revb-syscon
+              - arm,realview-eb11mp-revc-syscon
+          - const: arm,realview-eb-syscon
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/as3711.txt b/Documentation/devicetree/bindings/mfd/as3711.txt
deleted file mode 100644
index d98cf18c721c..000000000000
--- a/Documentation/devicetree/bindings/mfd/as3711.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power
-supplies, a battery charger and an RTC. So far only bindings for the two stepup
-DCDC converters are defined. Other DCDC and LDO supplies are configured, using
-standard regulator properties, they must belong to a sub-node, called
-"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter
-configuration should be placed in a subnode, called "backlight."
-
-Compulsory properties:
-- compatible		: must be "ams,as3711"
-- reg			: specifies the I2C address
-
-To use the SU1 converter as a backlight source the following two properties must
-be provided:
-- su1-dev		: framebuffer phandle
-- su1-max-uA		: maximum current
-
-To use the SU2 converter as a backlight source the following two properties must
-be provided:
-- su2-dev		: framebuffer phandle
-- su1-max-uA		: maximum current
-
-Additionally one of these properties must be provided to select the type of
-feedback used:
-- su2-feedback-voltage	: voltage feedback is used
-- su2-feedback-curr1	: CURR1 input used for current feedback
-- su2-feedback-curr2	: CURR2 input used for current feedback
-- su2-feedback-curr3	: CURR3 input used for current feedback
-- su2-feedback-curr-auto: automatic current feedback selection
-
-and one of these to select the over-voltage protection pin
-- su2-fbprot-lx-sd4	: LX_SD4 is used for over-voltage protection
-- su2-fbprot-gpio2	: GPIO2 is used for over-voltage protection
-- su2-fbprot-gpio3	: GPIO3 is used for over-voltage protection
-- su2-fbprot-gpio4	: GPIO4 is used for over-voltage protection
-
-If "su2-feedback-curr-auto" is selected, one or more of the following properties
-have to be specified:
-- su2-auto-curr1	: use CURR1 input for current feedback
-- su2-auto-curr2	: use CURR2 input for current feedback
-- su2-auto-curr3	: use CURR3 input for current feedback
-
-Example:
-
-as3711@40 {
-	compatible = "ams,as3711";
-	reg = <0x40>;
-
-	regulators {
-		sd4 {
-			regulator-name = "1.215V";
-			regulator-min-microvolt = <1215000>;
-			regulator-max-microvolt = <1235000>;
-		};
-		ldo2 {
-			regulator-name = "2.8V CPU";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-	};
-
-	backlight {
-		compatible = "ams,as3711-bl";
-		su2-dev = <&lcdc>;
-		su2-max-uA = <36000>;
-		su2-feedback-curr-auto;
-		su2-fbprot-gpio4;
-		su2-auto-curr1;
-		su2-auto-curr2;
-		su2-auto-curr3;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
new file mode 100644
index 000000000000..da1887d7a8fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed System Control Unit
+
+description:
+  The Aspeed System Control Unit manages the global behaviour of the SoC,
+  configuring elements such as clocks, pinmux, and reset.
+  In AST2700 SOC which has two soc connection, each soc have its own scu
+  register control, ast2700-scu0 for soc0, ast2700-scu1 for soc1.
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+  - Andrew Jeffery <andrew@aj.id.au>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-scu
+          - aspeed,ast2500-scu
+          - aspeed,ast2600-scu
+          - aspeed,ast2700-scu0
+          - aspeed,ast2700-scu1
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    minimum: 1
+    maximum: 2
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+patternProperties:
+  '^p2a-control@[0-9a-f]+$':
+    description: >
+      PCI-to-AHB Bridge Control
+
+      The bridge is available on platforms with the VGA enabled on the Aspeed
+      device. In this case, the host has access to a 64KiB window into all of
+      the BMC's memory. The BMC can disable this bridge. If the bridge is
+      enabled, the host has read access to all the regions of memory, however
+      the host only has read and write access depending on a register
+      controlled by the BMC.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - aspeed,ast2400-p2a-ctrl
+          - aspeed,ast2500-p2a-ctrl
+      reg:
+        maxItems: 1
+
+      memory-region:
+        maxItems: 1
+        description:
+          A reserved_memory region to be used for the PCI to AHB mapping
+
+    required:
+      - compatible
+      - reg
+
+  '^pinctrl(@[0-9a-f]+)?$':
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          enum:
+            - aspeed,ast2400-pinctrl
+            - aspeed,ast2500-pinctrl
+            - aspeed,ast2600-pinctrl
+
+    required:
+      - compatible
+
+  '^interrupt-controller@[0-9a-f]+$':
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          enum:
+            - aspeed,ast2500-scu-ic
+            - aspeed,ast2600-scu-ic0
+            - aspeed,ast2600-scu-ic1
+            - aspeed,ast2700-scu-ic0
+            - aspeed,ast2700-scu-ic1
+            - aspeed,ast2700-scu-ic2
+            - aspeed,ast2700-scu-ic3
+
+  '^silicon-id@[0-9a-f]+$':
+    description: Unique hardware silicon identifiers within the SoC
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-silicon-id
+              - aspeed,ast2500-silicon-id
+              - aspeed,ast2600-silicon-id
+              - aspeed,ast2700-silicon-id
+          - const: aspeed,silicon-id
+
+      reg:
+        description:
+          The reg should be the unique silicon id register, and not backwards
+          compatible one in eg. the 2600.
+        minItems: 1
+        items:
+          - description: silicon id information registers
+          - description: unique chip id registers
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1e6e2000 {
+        compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
+
+        p2a-control@2c {
+            compatible = "aspeed,ast2400-p2a-ctrl";
+            reg = <0x2c 0x4>;
+        };
+
+        silicon-id@7c {
+            compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+            reg = <0x7c 0x4>, <0x150 0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt b/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
deleted file mode 100644
index aea5370efd97..000000000000
--- a/Documentation/devicetree/bindings/mfd/aspeed-gfx.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Device tree bindings for Aspeed SoC Display Controller (GFX)
-
-The Aspeed SoC Display Controller primarily does as its name suggests, but also
-participates in pinmux requests on the g5 SoCs. It is therefore considered a
-syscon device.
-
-Required properties:
-- compatible:		"aspeed,ast2500-gfx", "syscon"
-- reg:			contains offset/length value of the GFX memory
-			region.
-
-Example:
-
-gfx: display@1e6e6000 {
-	compatible = "aspeed,ast2500-gfx", "syscon";
-	reg = <0x1e6e6000 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
index 750996d9a175..cbc3a2485a2f 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-# # Copyright (c) 2021 Aspeed Tehchnology Inc.
+# # Copyright (c) 2021 Aspeed Technology Inc.
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
@@ -27,7 +27,7 @@ description:
     as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
     management and bus snoop configuration.
 
-  * A set of SuperIO[3] scratch registers enableing implementation of e.g. custom
+  * A set of SuperIO[3] scratch registers enabling implementation of e.g. custom
     hardware management protocols for handover between the host and baseboard
     management controller.
 
@@ -48,16 +48,16 @@ properties:
   reg:
     maxItems: 1
 
-  "#address-cells":
+  '#address-cells':
     const: 1
 
-  "#size-cells":
+  '#size-cells':
     const: 1
 
   ranges: true
 
 patternProperties:
-  "^lpc-ctrl@[0-9a-f]+$":
+  '^lpc-ctrl@[0-9a-f]+$':
     type: object
     additionalProperties: false
 
@@ -92,7 +92,7 @@ patternProperties:
       - compatible
       - clocks
 
-  "^reset-controller@[0-9a-f]+$":
+  '^reset-controller@[0-9a-f]+$':
     type: object
     additionalProperties: false
 
@@ -118,7 +118,7 @@ patternProperties:
       - compatible
       - '#reset-cells'
 
-  "^lpc-snoop@[0-9a-f]+$":
+  '^lpc-snoop@[0-9a-f]+$':
     type: object
     additionalProperties: false
 
@@ -137,6 +137,9 @@ patternProperties:
       reg:
         maxItems: 1
 
+      clocks:
+        maxItems: 1
+
       interrupts:
         maxItems: 1
 
@@ -149,15 +152,15 @@ patternProperties:
       - interrupts
       - snoop-ports
 
-  "^uart-routing@[0-9a-f]+$":
+  '^uart-routing@[0-9a-f]+$':
     $ref: /schemas/soc/aspeed/uart-routing.yaml#
     description: The UART routing control under LPC register space
 
 required:
   - compatible
   - reg
-  - "#address-cells"
-  - "#size-cells"
+  - '#address-cells'
+  - '#size-cells'
   - ranges
 
 additionalProperties:
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
deleted file mode 100644
index 857ee33f7329..000000000000
--- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-The Aspeed System Control Unit manages the global behaviour of the SoC,
-configuring elements such as clocks, pinmux, and reset.
-
-Required properties:
-- compatible:	One of:
-		"aspeed,ast2400-scu", "syscon", "simple-mfd"
-		"aspeed,ast2500-scu", "syscon", "simple-mfd"
-
-- reg:		contains the offset and length of the SCU memory region
-- #clock-cells: should be set to <1> - the system controller is also a
-	clock provider
-- #reset-cells: should be set to <1> - the system controller is also a
-	reset line provider
-
-Example:
-
-syscon: syscon@1e6e2000 {
-	compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
-	reg = <0x1e6e2000 0x1a8>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
-
-Silicon ID
------------------
-
-Families have unique hardware silicon identifiers within the SoC.
-
-Required properties:
-
- - compatible:		"aspeed,silicon-id" or:
-			"aspeed,ast2400-silicon-id" or
-			"aspeed,ast2500-silicon-id" or
-			"aspeed,ast2600-silicon-id"
-
- - reg:			offset and length of the silicon id information
-			optionally, a second offset and length describes the unique chip id
-
-			The reg should be the unique silicon id register, and
-			not backwards compatible one in eg. the 2600.
-
-Example:
-
-
-silicon-id@7c {
-        compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
-        reg = <0x7c 0x4 0x150 0x8>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-gpbr.yaml b/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-gpbr.yaml
new file mode 100644
index 000000000000..f6f47999c6c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-gpbr.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,at91sam9260-gpbr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 General Purpose Backup Registers
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+
+description:
+  The system controller embeds 256 bits of General Purpose Backup
+  registers organized as 8 32-bit registers.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9260-gpbr
+              - microchip,sama7d65-gpbr
+          - const: syscon
+      - items:
+          - enum:
+              - microchip,sam9x60-gpbr
+              - microchip,sam9x7-gpbr
+          - const: atmel,at91sam9260-gpbr
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@fffffd50 {
+        compatible = "atmel,at91sam9260-gpbr", "syscon";
+        reg = <0xfffffd50 0x10>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-matrix.yaml b/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-matrix.yaml
new file mode 100644
index 000000000000..447b3a3edbfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,at91sam9260-matrix.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,at91sam9260-matrix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip AT91 Bus Matrix
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+
+description:
+  The Bus Matrix (MATRIX) implements a multi-layer AHB, based on the
+  AHB-Lite protocol, that enables parallel access paths between multiple
+  masters and slaves in a system, thus increasing the overall bandwidth.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91sam9260-matrix
+              - atmel,at91sam9261-matrix
+              - atmel,at91sam9263-matrix
+              - atmel,at91sam9rl-matrix
+              - atmel,at91sam9g45-matrix
+              - atmel,at91sam9n12-matrix
+              - atmel,at91sam9x5-matrix
+              - atmel,sama5d3-matrix
+          - const: syscon
+      - items:
+          - enum:
+              - microchip,sam9x60-matrix
+              - microchip,sam9x7-matrix
+          - const: atmel,at91sam9x5-matrix
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@ffffec00 {
+        compatible = "atmel,sama5d3-matrix", "syscon";
+        reg = <0xffffec00 0x200>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml
new file mode 100644
index 000000000000..4aa36903e755
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,hlcdc.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel's HLCD Controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - Claudiu Beznea <claudiu.beznea@tuxon.dev>
+
+description:
+  The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two
+  subdevices, a PWM chip and a Display Controller.
+
+properties:
+  compatible:
+    enum:
+      - atmel,at91sam9n12-hlcdc
+      - atmel,at91sam9x5-hlcdc
+      - atmel,sama5d2-hlcdc
+      - atmel,sama5d3-hlcdc
+      - atmel,sama5d4-hlcdc
+      - microchip,sam9x60-hlcdc
+      - microchip,sam9x75-xlcdc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: periph_clk
+      - const: sys_clk
+      - const: slow_clk
+      - const: lvds_pll_clk
+    minItems: 3
+
+  display-controller:
+    $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml
+
+  pwm:
+    $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    lcd_controller: lcd-controller@f0030000 {
+      compatible = "atmel,sama5d3-hlcdc";
+      reg = <0xf0030000 0x2000>;
+      clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+      clock-names = "periph_clk", "sys_clk", "slow_clk";
+      interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+
+      display-controller {
+        compatible = "atmel,hlcdc-display-controller";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          #address-cells = <1>;
+          #size-cells = <0>;
+          reg = <0>;
+
+          hlcdc_panel_output: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&panel_input>;
+          };
+        };
+      };
+
+      pwm {
+        compatible = "atmel,hlcdc-pwm";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_lcd_pwm>;
+        #pwm-cells = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
new file mode 100644
index 000000000000..c7d6cf96796c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Flexcom (Flexible Serial Communication Unit)
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description:
+  The Microchip Flexcom is just a wrapper which embeds a SPI controller,
+  an I2C controller and an USART. Only one function can be used at a
+  time and is chosen at boot time according to the device tree.
+
+properties:
+  compatible:
+    oneOf:
+      - const: atmel,sama5d2-flexcom
+      - items:
+          - enum:
+              - microchip,sam9x7-flexcom
+              - microchip,sama7d65-flexcom
+              - microchip,sama7g5-flexcom
+          - const: atmel,sama5d2-flexcom
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    description:
+      One range for the full I/O register region. (including USART,
+      TWI and SPI registers).
+    items:
+      maxItems: 3
+
+  atmel,flexcom-mode:
+    description: |
+      Specifies the flexcom mode as follows:
+      1: USART
+      2: SPI
+      3: I2C.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+
+patternProperties:
+  "^serial@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing USART. See atmel-usart.txt for details
+      of USART bindings.
+
+  "^spi@[0-9a-f]+$":
+    type: object
+    description:
+      Child node describing SPI. See ../spi/spi_atmel.txt for details
+      of SPI bindings.
+
+  "^i2c@[0-9a-f]+$":
+    $ref: /schemas/i2c/atmel,at91sam-i2c.yaml
+    description:
+      Child node describing I2C.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - atmel,flexcom-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    flx0: flexcom@f8034000 {
+        compatible = "atmel,sama5d2-flexcom";
+        reg = <0xf8034000 0x200>;
+        clocks = <&flx0_clk>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xf8034000 0x800>;
+        atmel,flexcom-mode = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
deleted file mode 100644
index 692300117c64..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
-
-The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
-controller and an USART. Only one function can be used at a time and is chosen
-at boot time according to the device tree.
-
-Required properties:
-- compatible:		Should be "atmel,sama5d2-flexcom"
-- reg:			Should be the offset/length value for Flexcom dedicated
-			I/O registers (without USART, TWI or SPI registers).
-- clocks:		Should be the Flexcom peripheral clock from PMC.
-- #address-cells:	Should be <1>
-- #size-cells:		Should be <1>
-- ranges:		Should be one range for the full I/O register region
-			(including USART, TWI and SPI registers).
-- atmel,flexcom-mode:	Should be one of the following values:
-			- <1> for USART
-			- <2> for SPI
-			- <3> for I2C
-
-Required child:
-A single available child device of type matching the "atmel,flexcom-mode"
-property.
-
-The phandle provided by the clocks property of the child is the same as one for
-the Flexcom parent.
-
-For other properties, please refer to the documentations of the respective
-device:
-- ../serial/atmel-usart.txt
-- ../spi/spi_atmel.txt
-- ../i2c/i2c-at91.txt
-
-Example:
-
-flexcom@f8034000 {
-	compatible = "atmel,sama5d2-flexcom";
-	reg = <0xf8034000 0x200>;
-	clocks = <&flx0_clk>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x0 0xf8034000 0x800>;
-	atmel,flexcom-mode = <2>;
-
-	spi@400 {
-		compatible = "atmel,at91rm9200-spi";
-		reg = <0x400 0x200>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_flx0_default>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&flx0_clk>;
-		clock-names = "spi_clk";
-		atmel,fifo-size = <32>;
-
-		mtd_dataflash@0 {
-			compatible = "atmel,at25f512b";
-			reg = <0>;
-			spi-max-frequency = <20000000>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt b/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
deleted file mode 100644
index e8c525569f10..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-gpbr.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-* Device tree bindings for Atmel GPBR (General Purpose Backup Registers)
-
-The GPBR are a set of battery-backed registers.
-
-Required properties:
-- compatible:		Should be one of the following:
-			"atmel,at91sam9260-gpbr", "syscon"
-			"microchip,sam9x60-gpbr", "syscon"
-- reg:			contains offset/length value of the GPBR memory
-			region.
-
-Example:
-
-gpbr: gpbr@fffffd50 {
-	compatible = "atmel,at91sam9260-gpbr", "syscon";
-	reg = <0xfffffd50 0x10>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
deleted file mode 100644
index 5f8880cc757e..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
-
-Required properties:
- - compatible: value should be one of the following:
-   "atmel,at91sam9n12-hlcdc"
-   "atmel,at91sam9x5-hlcdc"
-   "atmel,sama5d2-hlcdc"
-   "atmel,sama5d3-hlcdc"
-   "atmel,sama5d4-hlcdc"
-   "microchip,sam9x60-hlcdc"
- - reg: base address and size of the HLCDC device registers.
- - clock-names: the name of the 3 clocks requested by the HLCDC device.
-   Should contain "periph_clk", "sys_clk" and "slow_clk".
- - clocks: should contain the 3 clocks requested by the HLCDC device.
- - interrupts: should contain the description of the HLCDC interrupt line
-
-The HLCDC IP exposes two subdevices:
- - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
- - a Display Controller: see ../display/atmel/hlcdc-dc.txt
-
-Example:
-
-	hlcdc: hlcdc@f0030000 {
-		compatible = "atmel,sama5d3-hlcdc";
-		reg = <0xf0030000 0x2000>;
-		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
-		clock-names = "periph_clk","sys_clk", "slow_clk";
-		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-
-		hlcdc-display-controller {
-			compatible = "atmel,hlcdc-display-controller";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-
-				hlcdc_panel_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-
-		hlcdc_pwm: hlcdc-pwm {
-			compatible = "atmel,hlcdc-pwm";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_lcd_pwm>;
-			#pwm-cells = <3>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
deleted file mode 100644
index 89d05c64fb01..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Device tree bindings for Atmel Bus Matrix
-
-The Bus Matrix registers are used to configure Atmel SoCs internal bus
-behavior (master/slave priorities, undefined burst length type, ...)
-
-Required properties:
-- compatible:		Should be one of the following
-			"atmel,at91sam9260-matrix", "syscon"
-			"atmel,at91sam9261-matrix", "syscon"
-			"atmel,at91sam9263-matrix", "syscon"
-			"atmel,at91sam9rl-matrix", "syscon"
-			"atmel,at91sam9g45-matrix", "syscon"
-			"atmel,at91sam9n12-matrix", "syscon"
-			"atmel,at91sam9x5-matrix", "syscon"
-			"atmel,sama5d3-matrix", "syscon"
-			"microchip,sam9x60-matrix", "syscon"
-- reg:			Contains offset/length value of the Bus Matrix
-			memory region.
-
-Example:
-
-matrix: matrix@ffffec00 {
-	compatible = "atmel,sama5d3-matrix", "syscon";
-	reg = <0xffffec00 0x200>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
index 5696d9fcb5dc..fd62add38a79 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-smc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
@@ -10,6 +10,7 @@ Required properties:
 			"atmel,sama5d3-smc", "syscon"
 			"atmel,sama5d2-smc", "syscon"
 			"microchip,sam9x60-smc", "syscon"
+			"microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon"
 - reg:			Contains offset/length value of the SMC memory
 			region.
 
diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
deleted file mode 100644
index a09133066aff..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
-
-Required properties for USART:
-- compatible: Should be one of the following:
-	- "atmel,at91rm9200-usart"
-	- "atmel,at91sam9260-usart"
-	- "microchip,sam9x60-usart"
-	- "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
-	- "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
-	- "microchip,sam9x60-dbgu", "microchip,sam9x60-usart"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt
-- clock-names: tuple listing input clock names.
-	Required elements: "usart"
-- clocks: phandles to input clocks.
-
-Required properties for USART in SPI mode:
-- #size-cells      : Must be <0>
-- #address-cells   : Must be <1>
-- cs-gpios: chipselects (internal cs not supported)
-- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)
-
-Optional properties in serial and SPI mode:
-- dma bindings for dma transfer:
-	- dmas: DMA specifier, consisting of a phandle to DMA controller node,
-		memory peripheral interface and USART DMA channel ID, FIFO configuration.
-		The order of DMA channels is fixed. The first DMA channel must be TX
-		associated channel and the second one must be RX associated channel.
-		Refer to dma.txt and atmel-dma.txt for details.
-	- dma-names: "tx" for TX channel.
-		     "rx" for RX channel.
-		     The order of dma-names is also fixed. The first name must be "tx"
-		     and the second one must be "rx" as in the examples below.
-
-Optional properties in serial mode:
-- atmel,use-dma-rx: use of PDC or DMA for receiving data
-- atmel,use-dma-tx: use of PDC or DMA for transmitting data
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
-  It will use specified PIO instead of the peripheral function pin for the USART feature.
-  If unsure, don't specify this property.
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
-  capable USARTs.
-- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
-
-<chip> compatible description:
-- at91rm9200:  legacy USART support
-- at91sam9260: generic USART implementation for SAM9 SoCs
-
-Example:
-- use PDC:
-	usart0: serial@fff8c000 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0xfff8c000 0x4000>;
-		interrupts = <7>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
-		cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
-		dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
-	};
-
-- use DMA:
-	usart0: serial@f001c000 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0xf001c000 0x100>;
-		interrupts = <12 4 5>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		dmas = <&dma0 2 0x3>,
-		       <&dma0 2 0x204>;
-		dma-names = "tx", "rx";
-		atmel,fifo-size = <32>;
-	};
-
-- SPI mode:
-	#include <dt-bindings/mfd/at91-usart.h>
-
-	spi0: spi@f001c000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart";
-		atmel,usart-mode = <AT91_USART_MODE_SPI>;
-		reg = <0xf001c000 0x100>;
-		interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
-		       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-		dma-names = "tx", "rx";
-		cs-gpios = <&pioB 3 0>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
deleted file mode 100644
index 1d6413e96c37..000000000000
--- a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-* ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC) bindings
-
-Required properties:
- - compatible		: Should be "rohm,bd9571mwv" or "rohm,bd9574mwf".
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: Marks the device node as an interrupt controller.
- - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
-			    The first cell is the IRQ number.
-			    The second cell is the flags, encoded as trigger
-			    masks from ../interrupt-controller/interrupts.txt.
- - gpio-controller      : Marks the device node as a GPIO Controller.
- - #gpio-cells          : Should be two.  The first cell is the pin number and
-                            the second cell is used to specify flags.
-                            See ../gpio/gpio.txt for more information.
- - regulators:          : List of child nodes that specify the regulator
-                            initialization data. Child nodes must be named
-                            after their hardware counterparts:
-			     - vd09
-			     - vd18
-			     - vd25
-			     - vd33
-			     - dvfs
-			    Each child node is defined using the standard
-			    binding for regulators.
-
-Optional properties:
-  - rohm,ddr-backup-power : Value to use for DDR-Backup Power (default 0).
-			    This is a bitmask that specifies which DDR power
-			    rails need to be kept powered when backup mode is
-			    entered, for system suspend:
-			      - bit 0: DDR0
-			      - bit 1: DDR1
-			      - bit 2: DDR0C
-			      - bit 3: DDR1C
-			    These bits match the KEEPON_DDR* bits in the
-			    documentation for the "BKUP Mode Cnt" register.
-  - rohm,rstbmode-level: The RSTB signal is configured for level mode, to
-			 accommodate a toggle power switch (the RSTBMODE pin is
-			 strapped low).
-  - rohm,rstbmode-pulse: The RSTB signal is configured for pulse mode, to
-			 accommodate a momentary power switch (the RSTBMODE pin
-			 is strapped high).
-			 The two properties above are mutually exclusive.
-
-Example:
-
-	pmic: pmic@30 {
-		compatible = "rohm,bd9571mwv";
-		reg = <0x30>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		rohm,ddr-backup-power = <0xf>;
-		rohm,rstbmode-pulse;
-
-		regulators {
-			dvfs: dvfs {
-				regulator-name = "dvfs";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1030000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt
deleted file mode 100644
index be51a15e05f9..000000000000
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt
+++ /dev/null
@@ -1,39 +0,0 @@
--------------------------------
-BCM590xx Power Management Units
--------------------------------
-
-Required properties:
-- compatible: "brcm,bcm59056"
-- reg: I2C slave address
-- interrupts: interrupt for the PMU. Generic interrupt client node bindings
-  are described in interrupt-controller/interrupts.txt
-
-------------------
-Voltage Regulators
-------------------
-
-Optional child nodes:
-- regulators: container node for regulators following the generic
-  regulator binding in regulator/regulator.txt
-
-  The valid regulator node names for BCM59056 are:
-  	rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
-	mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
-	csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
-	gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
-	vbus
-
-Example:
-	pmu: bcm59056@8 {
-		compatible = "brcm,bcm59056";
-		reg = <0x08>;
-		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-		regulators {
-			rfldo_reg: rfldo {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			...
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
new file mode 100644
index 000000000000..b67d7a723fc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,bcm59056.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM590xx Power Management Units
+
+maintainers:
+  - Artur Weber <aweber.kernel@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm59054
+      - brcm,bcm59056
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm59054
+    then:
+      properties:
+        regulators:
+          $ref: /schemas/regulator/brcm,bcm59054.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm59056
+    then:
+      properties:
+        regulators:
+          $ref: /schemas/regulator/brcm,bcm59056.yaml#
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@8 {
+            compatible = "brcm,bcm59056";
+            reg = <0x08>;
+            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+
+            regulators {
+                rfldo {
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
index afc569bc15cf..cb480162f967 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6318 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6318 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
@@ -35,16 +35,16 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6318-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
index c7771c86d7c1..9c2a04829da5 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM63268 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM63268 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
@@ -35,16 +35,16 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm63268-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
@@ -148,47 +148,47 @@ examples:
 
         pinctrl_nand: nand-pins {
           function = "nand";
-          group = "nand_grp";
+          pins = "nand_grp";
         };
 
         pinctrl_gpio35_alt: gpio35_alt-pins {
           function = "gpio35_alt";
-          pin = "gpio35";
+          pins = "gpio35";
         };
 
         pinctrl_dectpd: dectpd-pins {
           function = "dectpd";
-          group = "dectpd_grp";
+          pins = "dectpd_grp";
         };
 
         pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins {
           function = "vdsl_phy_override_0";
-          group = "vdsl_phy_override_0_grp";
+          pins = "vdsl_phy_override_0_grp";
         };
 
         pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins {
           function = "vdsl_phy_override_1";
-          group = "vdsl_phy_override_1_grp";
+          pins = "vdsl_phy_override_1_grp";
         };
 
         pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins {
           function = "vdsl_phy_override_2";
-          group = "vdsl_phy_override_2_grp";
+          pins = "vdsl_phy_override_2_grp";
         };
 
         pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins {
           function = "vdsl_phy_override_3";
-          group = "vdsl_phy_override_3_grp";
+          pins = "vdsl_phy_override_3_grp";
         };
 
         pinctrl_dsl_gpio8: dsl_gpio8-pins {
           function = "dsl_gpio8";
-          group = "dsl_gpio8";
+          pins = "dsl_gpio8";
         };
 
         pinctrl_dsl_gpio9: dsl_gpio9-pins {
           function = "dsl_gpio9";
-          group = "dsl_gpio9";
+          pins = "dsl_gpio9";
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
index 33963c11ae62..5f48209ed40f 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6328 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6328 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
@@ -35,16 +35,16 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6328-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
index 3e44bea78b03..f1f4629565d9 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6358 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6358 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
@@ -35,16 +35,16 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6358-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
index 48d14a5fe0d5..c2941638c8f2 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6362 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6362 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
@@ -35,16 +35,16 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6362-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
@@ -230,7 +230,7 @@ examples:
 
         pinctrl_nand: nand-pins {
           function = "nand";
-          group = "nand_grp";
+          pins = "nand_grp";
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
index 307270b0cfed..44e77d77d314 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6368 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6368 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
@@ -35,16 +35,16 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../gpio/brcm,bcm6345-gpio.yaml"
+    $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml
     description:
       GPIO controller for the SoC GPIOs. This child node definition
       should follow the bindings specified in
-      Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml.
+      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
 
   "^pinctrl@[0-9a-f]+$":
     # Child node
     type: object
-    $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml"
+    $ref: /schemas/pinctrl/brcm,bcm6368-pinctrl.yaml
     description:
       Pin controller for the SoC pins. This child node definition
       should follow the bindings specified in
@@ -240,7 +240,7 @@ examples:
 
         pinctrl_uart1: uart1-pins {
           function = "uart1";
-          group = "uart1_grp";
+          pins = "uart1_grp";
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
index be4a2df71c25..04910e4f88b2 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -34,19 +34,19 @@ properties:
 
 patternProperties:
   '^clock-controller@[a-f0-9]+$':
-    $ref: ../clock/brcm,iproc-clocks.yaml
+    $ref: /schemas/clock/brcm,iproc-clocks.yaml
 
   '^phy@[a-f0-9]+$':
-    $ref: ../phy/bcm-ns-usb2-phy.yaml
+    $ref: /schemas/phy/bcm-ns-usb2-phy.yaml
 
-  '^pin-controller@[a-f0-9]+$':
-    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+  '^pinctrl@[a-f0-9]+$':
+    $ref: /schemas/pinctrl/brcm,ns-pinmux.yaml
 
   '^syscon@[a-f0-9]+$':
     $ref: syscon.yaml
 
   '^thermal@[a-f0-9]+$':
-    $ref: ../thermal/brcm,ns-thermal.yaml
+    $ref: /schemas/thermal/brcm,ns-thermal.yaml
 
 additionalProperties: false
 
@@ -94,7 +94,7 @@ examples:
             reg = <0x180 0x4>;
         };
 
-        pin-controller@1c0 {
+        pinctrl@1c0 {
             compatible = "brcm,bcm4708-pinmux";
             reg = <0x1c0 0x24>;
             reg-names = "cru_gpio_control";
diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt
deleted file mode 100644
index 82f82e069563..000000000000
--- a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Broadcom iProc Chip Device Resource Unit (CDRU)
-
-Various Broadcom iProc SoCs have a set of registers that provide various
-chip specific device and resource configurations. This node allows access to
-these CDRU registers via syscon.
-
-Required properties:
-- compatible: should contain:
-		"brcm,sr-cdru", "syscon" for Stingray
-- reg: base address and range of the CDRU registers
-
-Example:
-	cdru: syscon@6641d000 {
-		compatible = "brcm,sr-cdru", "syscon";
-		reg = <0 0x6641d000 0 0x400>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt
deleted file mode 100644
index 4421e9771b8a..000000000000
--- a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Broadcom iProc Multi Host Bridge (MHB)
-
-Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls
-the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint
-interface; 3) access to the Nitro (network processing) engine
-
-This node allows access to these MHB registers via syscon.
-
-Required properties:
-- compatible: should contain:
-		"brcm,sr-mhb", "syscon" for Stingray
-- reg: base address and range of the MHB registers
-
-Example:
-	mhb: syscon@60401000 {
-		compatible = "brcm,sr-mhb", "syscon";
-		reg = <0 0x60401000 0 0x38c>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
index cff7d772a7db..abe24526f3d7 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
@@ -33,7 +33,7 @@ properties:
 
 patternProperties:
   '^reset-controller@[a-f0-9]+$':
-    $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml
+    $ref: /schemas/reset/brcm,bcm4908-misc-pcie-reset.yaml
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/mfd/brcm,twd.yaml b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml
new file mode 100644
index 000000000000..e5136a37b0a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,twd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's Timer-Watchdog (aka TWD)
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom has a Timer-Watchdog block used in multiple SoCs (e.g., BCM4908,
+  BCM63xx, BCM7038). There are few variants available (they differ slightly in
+  registers layout). This block consists of: timers, watchdog and optionally a
+  software reset handler.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm4908-twd
+          - brcm,bcm7038-twd
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  '^timer@[a-f0-9]+$':
+    $ref: /schemas/timer/brcm,bcmbca-timer.yaml
+
+  '^watchdog@[a-f0-9]+$':
+    $ref: /schemas/watchdog/brcm,bcm7038-wdt.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    timer-mfd@ff800400 {
+        compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+        reg = <0xff800400 0x4c>;
+        ranges = <0x00000000 0xff800400 0x4c>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        timer@0 {
+            compatible = "brcm,bcm63138-timer";
+            reg = <0x0 0x28>;
+        };
+
+        watchdog@28 {
+            compatible = "brcm,bcm7038-wdt";
+            reg = <0x28 0x8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
index c24ad45cabb5..2451d0f0e4e3 100644
--- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/canaan,k210-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Canaan Kendryte K210 System Controller Device Tree Bindings
+title: Canaan Kendryte K210 System Controller
 
 maintainers:
-  - Damien Le Moal <damien.lemoal@wdc.com>
+  - Damien Le Moal <dlemoal@kernel.org>
 
 description:
   Canaan Inc. Kendryte K210 SoC system controller which provides a
@@ -36,7 +36,7 @@ properties:
   clock-controller:
     # Child node
     type: object
-    $ref: "../clock/canaan,k210-clk.yaml"
+    $ref: /schemas/clock/canaan,k210-clk.yaml
     description:
       Clock controller for the SoC clocks. This child node definition
       should follow the bindings specified in
@@ -45,7 +45,7 @@ properties:
   reset-controller:
     # Child node
     type: object
-    $ref: "../reset/canaan,k210-rst.yaml"
+    $ref: /schemas/reset/canaan,k210-rst.yaml
     description:
       Reset controller for the SoC. This child node definition
       should follow the bindings specified in
@@ -54,7 +54,7 @@ properties:
   syscon-reboot:
     # Child node
     type: object
-    $ref: "../power/reset/syscon-reboot.yaml"
+    $ref: /schemas/power/reset/syscon-reboot.yaml
     description:
       Reboot method for the SoC. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
index c00ad3e21c21..ebbedabb2bd4 100644
--- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
@@ -126,7 +126,7 @@ properties:
       clock-frequency:
         const: 12288000
 
-  lochnagar-pinctrl:
+  pinctrl:
     type: object
     $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
 
@@ -144,6 +144,7 @@ properties:
       CODECs digital core if not being provided by an internal regulator.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -161,6 +162,7 @@ properties:
       CODECs MICVDD.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -177,6 +179,7 @@ properties:
       Initialisation data for the MIC1VDD supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -202,6 +205,7 @@ properties:
       Initialisation data for the MIC2VDD supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -228,6 +232,7 @@ properties:
       the CODECs analog and 1.8V digital supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -255,13 +260,13 @@ required:
   - reg
   - reset-gpios
   - lochnagar-clk
-  - lochnagar-pinctrl
+  - pinctrl
 
 additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clk/lochnagar.h>
+    #include <dt-bindings/clock/lochnagar.h>
     #include <dt-bindings/pinctrl/lochnagar.h>
     i2c@e0004000 {
         #address-cells = <1>;
@@ -293,7 +298,7 @@ examples:
                 clock-frequency = <32768>;
             };
 
-            lochnagar-pinctrl {
+            pinctrl {
                 compatible = "cirrus,lochnagar-pinctrl";
 
                 gpio-controller;
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
index 499c62c04daa..68c75a517c92 100644
--- a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
@@ -221,7 +221,6 @@ required:
   - '#gpio-cells'
   - interrupt-controller
   - '#interrupt-cells'
-  - interrupt-parent
   - interrupts
   - AVDD-supply
   - DBVDD1-supply
@@ -246,8 +245,7 @@ examples:
 
             interrupt-controller;
             #interrupt-cells = <2>;
-            interrupts = <&host_irq1>;
-            interrupt-parent = <&gic>;
+            interrupts = <4 1 0>;
 
             gpio-controller;
             #gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
deleted file mode 100644
index 07c69c0c6624..000000000000
--- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Dialog DA9052/53 Power Management Integrated Circuit (PMIC)
-
-Required properties:
-- compatible : Should be "dlg,da9052", "dlg,da9053-aa",
-			 "dlg,da9053-ab", or "dlg,da9053-bb"
-
-Optional properties:
-- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen
-                    input lines are used as general purpose analogue
-					input.
-- tsiref-supply: Phandle to the regulator, which provides the reference
-                 voltage for the TSIREF pin. Must be provided when the
-			     touchscreen pins are used for ADC purposes.
-
-Sub-nodes:
-- regulators : Contain the regulator nodes. The DA9052/53 regulators are
-  bound using their names as listed below:
-
-    buck1     : regulator BUCK CORE
-    buck2     : regulator BUCK PRO
-    buck3     : regulator BUCK MEM
-    buck4     : regulator BUCK PERI
-    ldo1      : regulator LDO1
-    ldo2      : regulator LDO2
-    ldo3      : regulator LDO3
-    ldo4      : regulator LDO4
-    ldo5      : regulator LDO5
-    ldo6      : regulator LDO6
-    ldo7      : regulator LDO7
-    ldo8      : regulator LDO8
-    ldo9      : regulator LDO9
-    ldo10     : regulator LDO10
-
-  The bindings details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-Examples:
-
-i2c@63fc8000 { /* I2C1 */
-
-	pmic: dialog@48 {
-		compatible = "dlg,da9053-aa";
-		reg = <0x48>;
-
-		regulators {
-			buck1 {
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2075000>;
-			};
-
-			buck2 {
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <2075000>;
-			};
-
-			buck3 {
-				regulator-min-microvolt = <925000>;
-				regulator-max-microvolt = <2500000>;
-			};
-
-			buck4 {
-				regulator-min-microvolt = <925000>;
-				regulator-max-microvolt = <2500000>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
deleted file mode 100644
index bab0d0e66cb3..000000000000
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ /dev/null
@@ -1,123 +0,0 @@
-* Dialog DA9062 Power Management Integrated Circuit (PMIC)
-
-Product information for the DA9062 and DA9061 devices can be found here:
-- https://www.dialog-semiconductor.com/products/da9062
-- https://www.dialog-semiconductor.com/products/da9061
-
-The DA9062 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-rtc              :               : Real-Time Clock
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-da9062-gpio             :               : GPIOs
-
-The DA9061 PMIC consists of:
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9062-regulator        :               : LDOs & BUCKs
-da9062-onkey            :               : On Key
-da9062-watchdog         :               : Watchdog Timer
-da9062-thermal          :               : Thermal
-
-======
-
-Required properties:
-
-- compatible : Should be
-    "dlg,da9062" for DA9062
-    "dlg,da9061" for DA9061
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-further information on IRQ bindings.
-
-Optional properties:
-
-- gpio-controller : Marks the device as a gpio controller.
-- #gpio-cells     : Should be two. The first cell is the pin number and the
-                    second cell is used to specify the gpio polarity.
-
-See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
-GPIO bindings.
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9062 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    buck4    : BUCK_4
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The DA9061 regulators are bound using their names listed below:
-
-    buck1    : BUCK_1
-    buck2    : BUCK_2
-    buck3    : BUCK_3
-    ldo1     : LDO_1
-    ldo2     : LDO_2
-    ldo3     : LDO_3
-    ldo4     : LDO_4
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-  regulator-initial-mode may be specified for buck regulators using mode values
-  from include/dt-bindings/regulator/dlg,da9063-regulator.h.
-
-- rtc : This node defines settings required for the Real-Time Clock associated
-  with the DA9062. There are currently no entries in this binding, however
-  compatible = "dlg,da9062-rtc" should be added if a node is created.
-
-- onkey : See ../input/da9062-onkey.txt
-
-- watchdog: See ../watchdog/da9062-watchdog.txt
-
-- thermal : See ../thermal/da9062-thermal.txt
-
-Example:
-
-	pmic0: da9062@58 {
-		compatible = "dlg,da9062";
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9062-rtc";
-		};
-
-		regulators {
-			DA9062_BUCK1: buck1 {
-				regulator-name = "BUCK1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
-				regulator-boot-on;
-			};
-			DA9062_LDO1: ldo1 {
-				regulator-name = "LDO_1";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
deleted file mode 100644
index 8da879935c59..000000000000
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
-
-DA9093 consists of a large and varied group of sub-devices (I2C Only):
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9063-regulator        :               : LDOs & BUCKs
-da9063-onkey            :               : On Key
-da9063-rtc              :               : Real-Time Clock (DA9063 only)
-da9063-watchdog         :               : Watchdog
-
-======
-
-Required properties:
-
-- compatible : Should be "dlg,da9063" or "dlg,da9063l"
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9063(L) regulators are bound using their names listed below:
-
-    bcore1    : BUCK CORE1
-    bcore2    : BUCK CORE2
-    bpro      : BUCK PRO
-    bmem      : BUCK MEM
-    bio       : BUCK IO
-    bperi     : BUCK PERI
-    ldo1      : LDO_1	(DA9063 only)
-    ldo2      : LDO_2	(DA9063 only)
-    ldo3      : LDO_3
-    ldo4      : LDO_4	(DA9063 only)
-    ldo5      : LDO_5	(DA9063 only)
-    ldo6      : LDO_6	(DA9063 only)
-    ldo7      : LDO_7
-    ldo8      : LDO_8
-    ldo9      : LDO_9
-    ldo10     : LDO_10	(DA9063 only)
-    ldo11     : LDO_11
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-- rtc : This node defines settings for the Real-Time Clock associated with
-  the DA9063 only. The RTC is not present in DA9063L. There are currently
-  no entries in this binding, however compatible = "dlg,da9063-rtc" should
-  be added if a node is created.
-
-- onkey : This node defines the OnKey settings for controlling the key
-  functionality of the device. The node should contain the compatible property
-  with the value "dlg,da9063-onkey".
-
-  Optional onkey properties:
-
-  - dlg,disable-key-power : Disable power-down using a long key-press. If this
-    entry exists the OnKey driver will remove support for the KEY_POWER key
-    press. If this entry does not exist then by default the key-press
-    triggered power down is enabled and the OnKey will support both KEY_POWER
-    and KEY_SLEEP.
-
-- watchdog : This node defines settings for the Watchdog timer associated
-  with the DA9063 and DA9063L. There are currently no entries in this
-  binding, however compatible = "dlg,da9063-watchdog" should be added
-  if a node is created.
-
-
-Example:
-
-	pmic0: da9063@58 {
-		compatible = "dlg,da9063"
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		wdt {
-			compatible = "dlg,da9063-watchdog";
-		};
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			dlg,disable-key-power;
-		};
-
-		regulators {
-			DA9063_BCORE1: bcore1 {
-				regulator-name = "BCORE1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-boot-on;
-			};
-			DA9063_LDO11: ldo11 {
-				regulator-name = "LDO_11";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
new file mode 100644
index 000000000000..d3b79140cce2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Lattice CPLD onboard the TN48M switches is used for system
+  management.
+
+  It provides information about the hardware model, revision,
+  PSU status etc.
+
+  It is also being used as a GPIO expander and reset controller
+  for the switch MAC-s and other peripherals.
+
+properties:
+  compatible:
+    const: delta,tn48m-cpld
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: /schemas/gpio/delta,tn48m-gpio.yaml
+
+  "^reset-controller?$":
+    $ref: /schemas/reset/delta,tn48m-reset.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpld@41 {
+            compatible = "delta,tn48m-cpld";
+            reg = <0x41>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@31 {
+                compatible = "delta,tn48m-gpo";
+                reg = <0x31>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@3a {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x3a>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@40 {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x40>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            reset-controller {
+              compatible = "delta,tn48m-reset";
+              #reset-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9052.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9052.yaml
new file mode 100644
index 000000000000..1103a8cc5cea
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/dlg,da9052.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/dlg,da9052.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9052/53 Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - dlg,da9053-aa
+          - dlg,da9053-ab
+          - dlg,da9053-bb
+          - dlg,da9053-bc
+          - dlg,da9052
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dlg,tsi-as-adc:
+    type: boolean
+    description:
+      if set the X+, X-, Y+, Y- touchscreen input lines are used as general
+      purpose analogue input.
+
+  tsiref-supply:
+    description: The reference voltage for the TSIREF pin.
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^(ldo([1-9]|10)|buck[1-4])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@48 {
+            compatible = "dlg,da9053-aa";
+            reg = <0x48>;
+
+            regulators {
+                buck1 {
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2075000>;
+                };
+
+                buck2 {
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2075000>;
+                };
+
+                buck3 {
+                    regulator-min-microvolt = <925000>;
+                    regulator-max-microvolt = <2500000>;
+                };
+
+                buck4 {
+                    regulator-min-microvolt = <925000>;
+                    regulator-max-microvolt = <2500000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
new file mode 100644
index 000000000000..4f08e9ac7e56
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
@@ -0,0 +1,329 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Steve Twiss <stwiss.opensource@diasemi.com>
+
+description: |
+  For device-tree bindings of other sub-modules refer to the binding documents
+  under the respective sub-system directories.
+  Using regulator-{uv,ov}-{warn,error,protection}-microvolt requires special
+  handling: First, when GP_FB2 is used, it must be ensured that there is no
+  moment where all voltage monitors are disabled. Next, as da9063 only supports
+  UV *and* OV monitoring, both must be set to the same severity and value
+  (0: disable, 1: enable).
+  Product information for the DA906{3L,3,2,1} devices can be found here:
+  - https://www.dialog-semiconductor.com/products/da9063l
+  - https://www.dialog-semiconductor.com/products/da9063
+  - https://www.dialog-semiconductor.com/products/da9062
+  - https://www.dialog-semiconductor.com/products/da9061
+
+properties:
+  compatible:
+    enum:
+      - dlg,da9061
+      - dlg,da9062
+      - dlg,da9063
+      - dlg,da9063l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: dlg,da9062-gpio
+
+  onkey:
+    $ref: /schemas/input/dlg,da9062-onkey.yaml
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$":
+        $ref: /schemas/regulator/regulator.yaml
+        unevaluatedProperties: false
+
+  rtc:
+    type: object
+    $ref: /schemas/rtc/rtc.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - dlg,da9062-rtc
+          - dlg,da9063-rtc
+
+  thermal:
+    $ref: /schemas/thermal/dlg,da9062-thermal.yaml
+
+  watchdog:
+    $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml
+
+  wakeup-source: true
+
+patternProperties:
+  "^(.+-hog(-[0-9]+)?)$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9063
+              - dlg,da9063l
+    then:
+      properties:
+        gpio-controller: false
+        "#gpio-cells": false
+        gpio: false
+        regulators:
+          patternProperties:
+            "^buck[1-4]$": false
+        thermal: false
+      required:
+        - interrupts
+        - interrupt-controller
+        - '#interrupt-cells'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9062
+    then:
+      properties:
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false
+      required:
+        - gpio
+        - onkey
+        - rtc
+        - thermal
+        - watchdog
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dlg,da9061
+    then:
+      properties:
+        gpio-controller: false
+        "#gpio-cells": false
+        gpio: false
+        regulators:
+          patternProperties:
+            "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false
+        rtc: false
+      required:
+        - onkey
+        - thermal
+        - watchdog
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9063";
+        reg = <0x58>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        rtc {
+          compatible = "dlg,da9063-rtc";
+        };
+
+        watchdog {
+          compatible = "dlg,da9063-watchdog";
+        };
+
+        onkey {
+          compatible = "dlg,da9063-onkey";
+          dlg,disable-key-power;
+        };
+
+        regulators {
+          bcore1 {
+            regulator-name = "BCORE1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1570000>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <2000000>;
+            regulator-boot-on;
+          };
+          ldo6 {
+            /* UNUSED */
+            regulator-name = "LDO_6";
+            regulator-uv-protection-microvolt = <0>;
+            regulator-ov-protection-microvolt = <0>;
+          };
+          ldo11 {
+            regulator-name = "LDO_11";
+            regulator-min-microvolt = <900000>;
+            regulator-max-microvolt = <900000>;
+            regulator-uv-protection-microvolt = <1>;
+            regulator-ov-protection-microvolt = <1>;
+            regulator-always-on;
+          };
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9063-regulator.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9062";
+        reg = <0x58>;
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        sd0-pwr-sel-hog {
+          gpio-hog;
+          gpios = <1 0>;
+          input;
+          line-name = "SD0_PWR_SEL";
+        };
+
+        sd1-pwr-sel-hog {
+          gpio-hog;
+          gpios = <2 0>;
+          input;
+          line-name = "SD1_PWR_SEL";
+        };
+
+        sw-et0-en-hog {
+          gpio-hog;
+          gpios = <3 0>;
+          input;
+          line-name = "SW_ET0_EN#";
+        };
+
+        pmic-good-hog {
+          gpio-hog;
+          gpios = <4 0>;
+          output-high;
+          line-name = "PMIC_PGOOD";
+        };
+
+        gpio {
+          compatible = "dlg,da9062-gpio";
+        };
+
+        onkey {
+          compatible = "dlg,da9062-onkey";
+        };
+
+        regulators {
+          buck1 {
+            regulator-name = "vdd_arm";
+            regulator-min-microvolt = <925000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck2 {
+            regulator-name = "vdd_soc";
+            regulator-min-microvolt = <1150000>;
+            regulator-max-microvolt = <1380000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck3 {
+            regulator-name = "vdd_ddr3";
+            regulator-min-microvolt = <1500000>;
+            regulator-max-microvolt = <1500000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          buck4 {
+            regulator-name = "vdd_eth";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+            regulator-always-on;
+          };
+          ldo1 {
+            regulator-name = "vdd_snvs";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo2 {
+            regulator-name = "vdd_high";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+          ldo3 {
+            regulator-name = "vdd_eth_io";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+          };
+          ldo4 {
+            regulator-name = "vdd_emmc";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+        };
+
+        rtc {
+          compatible = "dlg,da9062-rtc";
+        };
+
+        thermal {
+          compatible = "dlg,da9062-thermal";
+        };
+
+        watchdog {
+          compatible = "dlg,da9062-watchdog";
+          dlg,use-sw-pm;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
index 08af356f5d27..9b11b6e2bbf7 100644
--- a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
+++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ENE KB3930 Embedded Controller bindings
+title: ENE KB3930 Embedded Controller
 
 description: |
   This binding describes the ENE KB3930 Embedded Controller attached to an
diff --git a/Documentation/devicetree/bindings/mfd/ene-kb930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
index 06ed9ec8f4bb..02c111def5de 100644
--- a/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
+++ b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/ene-kb930.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ENE KB930 Embedded Controller bindings
+title: ENE KB930 Embedded Controller
 
 description: |
   This binding describes the ENE KB930 Embedded Controller attached to an
@@ -13,6 +13,8 @@ description: |
 maintainers:
   - Dmitry Osipenko <digetx@gmail.com>
 
+$ref: /schemas/power/supply/power-supply.yaml
+
 properties:
   compatible:
     items:
@@ -22,15 +24,13 @@ properties:
   reg:
     maxItems: 1
 
-  monitored-battery: true
-  power-supplies: true
   system-power-controller: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml b/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml
new file mode 100644
index 000000000000..cfa69f1f380a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml
@@ -0,0 +1,300 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/fsl,mc13xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MC13xxx Power Management Integrated Circuits (PMIC)
+
+maintainers:
+  - Alexander Kurz <akurz@blala.de>
+
+description: >
+  The MC13xxx PMIC series consists of the three models MC13783, MC13892
+  and MC34708 and provide regulators and other features like RTC, ADC,
+  LED, touchscreen, codec and input buttons.
+
+  Link to datasheets
+    https://www.nxp.com/docs/en/data-sheet/MC13783.pdf
+    https://www.nxp.com/docs/en/data-sheet/MC13892.pdf
+    https://www.nxp.com/docs/en/data-sheet/MC34708.pdf
+
+properties:
+  compatible:
+    enum:
+      - fsl,mc13783
+      - fsl,mc13892
+      - fsl,mc34708
+
+  reg:
+    description: I2C slave address or SPI chip select number.
+    maxItems: 1
+
+  spi-max-frequency: true
+
+  spi-cs-high: true
+
+  system-power-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  buttons:
+    type: object
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^onkey@[0-2]$":
+        $ref: /schemas/input/input.yaml#
+        unevaluatedProperties: false
+        type: object
+
+        properties:
+          reg:
+            description: |
+              One of
+              MC13783 BUTTON IDs:
+                0: ONOFD1
+                1: ONOFD2
+                2: ONOFD3
+
+              MC13892 BUTTON IDs:
+                0: PWRON1
+                1: PWRON2
+                2: PWRON3
+
+              MC34708 BUTTON IDs:
+                0: PWRON1
+                1: PWRON2
+            maximum: 2
+
+          debounce-delay-ms:
+            enum: [0, 30, 150, 750]
+            default: 30
+            description:
+              Sets the debouncing delay in milliseconds.
+
+          active-low:
+            description: Set active when pin is pulled low.
+
+          linux,code: true
+
+          fsl,enable-reset:
+            description:
+              Setting of the global reset option.
+            type: boolean
+
+    unevaluatedProperties: false
+
+  leds:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      led-control:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: |
+          Setting for LED-Control register array length depends on model,
+          mc13783: 6, mc13892: 4, mc34708: 1
+
+    patternProperties:
+      '^led@[0-9a-b]$':
+        $ref: /schemas/leds/common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            description: |
+              One of
+              MC13783 LED IDs
+                0: Main display
+                1: AUX display
+                2: Keypad
+                3: Red 1
+                4: Green 1
+                5: Blue 1
+                6: Red 2
+                7: Green 2
+                8: Blue 2
+                9: Red 3
+                10: Green 3
+                11: Blue 3
+
+              MC13892 LED IDs
+                0: Main display
+                1: AUX display
+                2: Keypad
+                3: Red
+                4: Green
+                5: Blue
+
+              MC34708 LED IDs
+                0: Charger Red
+                1: Charger Green
+            maxItems: 1
+
+  regulators:
+    type: object
+
+    additionalProperties:
+      type: object
+
+    description: |
+      List of child nodes specifying the regulators, depending on chip variant.
+      Each child node is defined using the standard binding for regulators and
+      the optional regulator properties defined below.
+
+  fsl,mc13xxx-uses-adc:
+    type: boolean
+    description: Indicate the ADC is being used
+
+  fsl,mc13xxx-uses-codec:
+    type: boolean
+    description: Indicate the Audio Codec is being used
+
+  fsl,mc13xxx-uses-rtc:
+    type: boolean
+    description: Indicate the RTC is being used
+
+  fsl,mc13xxx-uses-touch:
+    type: boolean
+    description: Indicate the touchscreen controller is being used
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,mc13783
+    then:
+      properties:
+        leds:
+          properties:
+            led-control:
+              minItems: 6
+              maxItems: 6
+        regulators:
+          patternProperties:
+            "^gpo[1-4]|pwgt[12]spi|sw[12][ab]|sw3|vaudio|vcam|vdig|vesim|vgen|viohi|violo|vmmc[12]|vrf[12]|vrfbg|vrfcp|vrfdig|vrfref|vsim|vvib$":
+              type: object
+              $ref: /schemas/regulator/regulator.yaml#
+
+              unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,mc13892
+    then:
+      properties:
+        leds:
+          properties:
+            led-control:
+              minItems: 4
+              maxItems: 4
+        regulators:
+          patternProperties:
+            "^gpo[1-4]|pwgt[12]spi|sw[1-4]|swbst|vaudio|vcam|vcoincell|vdig|vgen[1-3]|viohi|vpll|vsd|vusb|vusb2|vvideo$":
+              type: object
+              $ref: /schemas/regulator/regulator.yaml#
+
+              unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,mc34708
+    then:
+      properties:
+        buttons:
+          patternProperties:
+            "^onkey@[0-2]$":
+              properties:
+                reg:
+                  maximum: 1
+        leds:
+          properties:
+            led-control:
+              minItems: 1
+              maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic: mc13892@0 {
+            compatible = "fsl,mc13892";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cs-high;
+            interrupt-parent = <&gpio0>;
+            interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+            fsl,mc13xxx-uses-rtc;
+            fsl,mc13xxx-uses-adc;
+
+            buttons {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                onkey@0 {
+                    reg = <0>;
+                    debounce-delay-ms = <30>;
+                    active-low;
+                    fsl,enable-reset;
+                };
+            };
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                led-control = <0x000 0x000 0x0e0 0x000>;
+
+                led@3 {
+                    reg = <3>;
+                    label = "system:red:live";
+                    linux,default-trigger = "heartbeat";
+                };
+            };
+
+            regulators {
+                sw1_reg: sw1 {
+                    regulator-min-microvolt = <600000>;
+                    regulator-max-microvolt = <1375000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                sw2_reg: sw2 {
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/fsl,mcu-mpc8349emitx.yaml b/Documentation/devicetree/bindings/mfd/fsl,mcu-mpc8349emitx.yaml
new file mode 100644
index 000000000000..8beb2ed9edb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/fsl,mcu-mpc8349emitx.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/fsl,mcu-mpc8349emitx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU)
+
+maintainers:
+  - J. Neuschäfer <j.ne@posteo.net>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,mc9s08qg8-mpc8315erdb
+              - fsl,mc9s08qg8-mpc8349emitx
+              - fsl,mc9s08qg8-mpc8377erdb
+              - fsl,mc9s08qg8-mpc8378erdb
+              - fsl,mc9s08qg8-mpc8379erdb
+          - const: fsl,mcu-mpc8349emitx
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mcu@a {
+            #gpio-cells = <2>;
+            compatible = "fsl,mc9s08qg8-mpc8349emitx",
+                         "fsl,mcu-mpc8349emitx";
+            reg = <0x0a>;
+            gpio-controller;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
deleted file mode 100644
index 5a1e8d21f7a0..000000000000
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ /dev/null
@@ -1,201 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Gateworks System Controller
-
-description: |
-  The Gateworks System Controller (GSC) is a device present across various
-  Gateworks product families that provides a set of system related features
-  such as the following (refer to the board hardware user manuals to see what
-  features are present)
-   - Watchdog Timer
-   - GPIO
-   - Pushbutton controller
-   - Hardware monitor with ADC's for temperature and voltage rails and
-     fan controller
-
-maintainers:
-  - Tim Harvey <tharvey@gateworks.com>
-  - Robert Jones <rjones@gateworks.com>
-
-properties:
-  $nodename:
-    pattern: "gsc@[0-9a-f]{1,2}"
-  compatible:
-    const: gw,gsc
-
-  reg:
-    description: I2C device address
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  "#interrupt-cells":
-    const: 1
-
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
-  adc:
-    type: object
-    description: Optional hardware monitoring module
-
-    properties:
-      compatible:
-        const: gw,gsc-adc
-
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
-    patternProperties:
-      "^channel@[0-9]+$":
-        type: object
-        description: |
-          Properties for a single ADC which can report cooked values
-          (i.e. temperature sensor based on thermister), raw values
-          (i.e. voltage rail with a pre-scaling resistor divider).
-
-        properties:
-          reg:
-            description: Register of the ADC
-            maxItems: 1
-
-          label:
-            description: Name of the ADC input
-
-          gw,mode:
-            description: |
-              conversion mode:
-                0 - temperature, in C*10
-                1 - pre-scaled 24-bit voltage value
-                2 - scaled voltage based on an optional resistor divider
-                    and optional offset
-                3 - pre-scaled 16-bit voltage value
-                4 - fan tach input to report RPM's
-            $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [0, 1, 2, 3, 4]
-
-          gw,voltage-divider-ohms:
-            description: Values of resistors for divider on raw ADC input
-            maxItems: 2
-            items:
-              minimum: 1000
-              maximum: 1000000
-
-          gw,voltage-offset-microvolt:
-            description: |
-              A positive voltage offset to apply to a raw ADC
-              (i.e. to compensate for a diode drop).
-            minimum: 0
-            maximum: 1000000
-
-        required:
-          - gw,mode
-          - reg
-          - label
-
-    required:
-      - compatible
-      - "#address-cells"
-      - "#size-cells"
-
-patternProperties:
-  "^fan-controller@[0-9a-f]+$":
-    type: object
-    description: Optional fan controller
-
-    properties:
-      compatible:
-        const: gw,gsc-fan
-
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
-      reg:
-        description: The fan controller base address
-        maxItems: 1
-
-    required:
-      - compatible
-      - reg
-      - "#address-cells"
-      - "#size-cells"
-
-required:
-  - compatible
-  - reg
-  - interrupts
-  - interrupt-controller
-  - "#interrupt-cells"
-  - "#address-cells"
-  - "#size-cells"
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/gpio/gpio.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
-    i2c {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        gsc@20 {
-            compatible = "gw,gsc";
-            reg = <0x20>;
-            interrupt-parent = <&gpio1>;
-            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-            interrupt-controller;
-            #interrupt-cells = <1>;
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            adc {
-                compatible = "gw,gsc-adc";
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                channel@0 { /* A0: Board Temperature */
-                    reg = <0x00>;
-                    label = "temp";
-                    gw,mode = <0>;
-                };
-
-                channel@2 { /* A1: Input Voltage (raw ADC) */
-                    reg = <0x02>;
-                    label = "vdd_vin";
-                    gw,mode = <1>;
-                    gw,voltage-divider-ohms = <22100 1000>;
-                    gw,voltage-offset-microvolt = <800000>;
-                };
-
-                channel@b { /* A2: Battery voltage */
-                    reg = <0x0b>;
-                    label = "vdd_bat";
-                    gw,mode = <1>;
-                };
-            };
-
-            fan-controller@2c {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                compatible = "gw,gsc-fan";
-                reg = <0x2c>;
-            };
-        };
-    };
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
deleted file mode 100644
index d793dd0316b7..000000000000
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ /dev/null
@@ -1,220 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mfd/google,cros-ec.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: ChromeOS Embedded Controller
-
-maintainers:
-  - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
-  - Guenter Roeck <groeck@chromium.org>
-
-description:
-  Google's ChromeOS EC is a microcontroller which talks to the AP and
-  implements various functions such as keyboard and battery charging.
-  The EC can be connected through various interfaces (I2C, SPI, and others)
-  and the compatible string specifies which interface is being used.
-
-properties:
-  compatible:
-    oneOf:
-      - description:
-          For implementations of the EC is connected through I2C.
-        const: google,cros-ec-i2c
-      - description:
-          For implementations of the EC is connected through SPI.
-        const: google,cros-ec-spi
-      - description:
-          For implementations of the EC is connected through RPMSG.
-        const: google,cros-ec-rpmsg
-
-  controller-data:
-    description:
-      SPI controller data, see bindings/spi/spi-samsung.txt
-    type: object
-
-  google,cros-ec-spi-pre-delay:
-    description:
-      This property specifies the delay in usecs between the
-      assertion of the CS and the first clock pulse.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
-
-  google,cros-ec-spi-msg-delay:
-    description:
-      This property specifies the delay in usecs between messages.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
-
-  google,has-vbc-nvram:
-    description:
-      Some implementations of the EC include a small nvram space used to
-      store verified boot context data. This boolean flag is used to specify
-      whether this nvram is present or not.
-    type: boolean
-
-  mtk,rpmsg-name:
-    description:
-      Must be defined if the cros-ec is a rpmsg device for a Mediatek
-      ARM Cortex M4 Co-processor. Contains the name pf the rpmsg
-      device. Used to match the subnode to the rpmsg device announced by
-      the SCP.
-    $ref: "/schemas/types.yaml#/definitions/string"
-
-  spi-max-frequency:
-    description: Maximum SPI frequency of the device in Hz.
-
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
-  wakeup-source:
-    description: Button can wake-up the system.
-
-  '#address-cells':
-    const: 1
-
-  '#size-cells':
-    const: 0
-
-  typec:
-    $ref: "/schemas/chrome/google,cros-ec-typec.yaml#"
-
-  ec-pwm:
-    $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
-
-  keyboard-controller:
-    $ref: "/schemas/input/google,cros-ec-keyb.yaml#"
-
-  proximity:
-    $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#"
-
-  codecs:
-    type: object
-    additionalProperties: false
-
-    properties:
-      '#address-cells':
-        const: 2
-
-      '#size-cells':
-        const: 1
-
-    patternProperties:
-      "^ec-codec@[a-f0-9]+$":
-        type: object
-        $ref: "/schemas/sound/google,cros-ec-codec.yaml#"
-
-    required:
-      - "#address-cells"
-      - "#size-cells"
-
-  cbas:
-    type: object
-
-    description:
-      This device is used to signal when a detachable base is attached
-      to a Chrome OS tablet. This device cannot be detected at runtime.
-
-    properties:
-      compatible:
-        const: google,cros-cbas
-
-    required:
-      - compatible
-
-    additionalProperties: false
-
-patternProperties:
-  "^i2c-tunnel[0-9]*$":
-    type: object
-    $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#"
-
-  "^regulator@[0-9]+$":
-    type: object
-    $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#"
-
-  "^extcon[0-9]*$":
-    type: object
-    $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#"
-
-required:
-  - compatible
-
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - google,cros-ec-i2c
-          - google,cros-ec-rpmsg
-then:
-  properties:
-    google,cros-ec-spi-pre-delay: false
-    google,cros-ec-spi-msg-delay: false
-    spi-max-frequency: false
-
-additionalProperties: false
-
-examples:
-  # Example for I2C
-  - |
-    #include <dt-bindings/gpio/gpio.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
-
-    i2c0 {
-        #address-cells = <1>;
-        #size-cells = <